John Deeredisk(no series)

John Deere 440 - DISK

Specifications · OEM parts breakdown

Search live 440 - DISK parts Source or supply its parts

Post a parts request and compare supplier quotes.

John Deere 440 - DISK specifications

Engine

Cylinders	2
Displacement	1857 cc (113.3 cu in)
Bore	10.79 cm (4.25 in.)
Stroke	10.21 cm (4.02 in.)
Compression Ratio	7.5:1

Dimensions

Wheelbase

215.0 cm (84.6 in.)

Performance

Rear PTO Speed

540/1,000 RPM

Service capacities (summary)

Fuel Tank Capacity	39.7 l (10.5 gal)
Coolant Capacity	9.5 l (2.5 gal)

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

All 440 - DISK assemblies by section

Every catalogued assembly group for the John Deere 440 - DISK. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Decals [B06]

John Deere : 440 - Disk : Decals [B06]

A2***29	Label; (Sub Aa32090) "Model Designation" Right And Left Rear Side Of Main Frame, Label; (Sub Aa32090) "Designation Model Kit" 50 mm (2") - Located On Outside Of Long Frame Tube And One On Outside Of Short Frame Tube, Label; (Sub Aa32090) "Designation Model Kit" 50 mm (2") Located On Outside Of Long Frame Tube And On Outside Of Short Frame Tube, Label; (Sub Aa32090) "Model Designation" - Located On Rear Cross Tube, Label; (Sub Aa32090) "Designation Model Kit" - Located On Outside Of Each Wing (This Application Only), Label; Model Designation Kit, Label; (Sub Aa32090) Kit, Model Designation, 51 mm (2") - Centered On Right Side Of Truss Tube Over Front Bottom, Label; (Sub Aa32090) Kit, Model Designation, Outside And Front Of Truss Tube, Label; (Sub Aa32090) "Model Designation" 51 mm (2"), Label; (Sub Aa32090) "Model Designation" 50 mm (2") Centered On Right Side Of Truss Tube Between Front Two Bottoms, Label; (Sub Aa32090) Kit, Model Designation, Left And Right Sides Of Main Frame, 50 mm (2"), Label; (Sub Aa32090) "Model Designation" - Located On R.H. End And Rear Of Tube, Label; (Sub Aa32090) "Designation Model Kit" - Located On Outside Of Each Side Tube And On Front Of Upper Cross Link, Label; (Sub Aa32090) "Model Designation" - Located On Rear Of Main Frame And Outside Of Each Narrow Wing; On Outside Of Each Wide Wing, Label; "Model Designation Kit" - Located On Each Side Pf Main Frame 65 mm (2.5"), Label; (Sub Aa32090) Model Designation, Label; (Sub Aa32090) Kit, Model Designation, 150 mm (6") Located On Right Side And Rear Of Truss Tube	2
AA***90	Sign; "Model Designation" Located On Rear Cross Tube., Sign; "Model Designation Kit" 75mm, Sign; "Model Designation" Located On Right Side Of Hitch Tube, Sign; "Model Designation" 50 mm, Sign; "Model Designation" Centered On Right Side Of Truss Between Front Two Bottoms, Sign; "Designation Model Kit" Located On Outside Of Long Frame Tube And On Outside Of Short Frame Tube, Sign; "Model Designation" - Located On R.H. End And Rear Of Tube, Sign; "Model Designation" On Outside Of Long Frame., Sign, Sign; "Model Designation Kit" - Located On Each Side Of Main Frame, Sign; "Model Designation" Located On Right And Left Side Of Main Frame., Sign; "Model Designation Kit" - Located On Outside Of Each Wing, Sign; "Model Designation" - Located On Rear Of Main Frame And Outside Of Each Narrow Wing; On Outside Of Each Wide Wing, Sign; "910" - Located On R.H. Mast Plate, Sign; "Model Designation" Right And Left Rear Side Of Main Frame., Sign; "Model Designation" Kit, Outside And Front Of Truss Tube, Sign; Kit, Model Designation, Located On Right Side And Rear Of Truss Tube.	2
JD***15	Label; "Leaping Deer" 125 mm (5") One Outside Of Rear Cross Tube., Label; "Leaping Deer" 125 mm (5") One On R.H Main Frame, Top Side Of Hitch Support And One On L.H. Main Frame, Top Side Of Hitch Support., Label; "Leaping Deer" 125 mm (5") One On Rear And One On Front Of R.H. Main Frame, Label; "Leaping Deer" 125 mm (5"), Label; "Leaping Deer" 127 mm (5") - On Outside Of Left Hitch Plate, Label; "Leaping Deer" On Rear Cross Tube Of R.H. Frame, Label; Leaping Deer, Label; Sub Pt5105 Or Pt5106 (40, 50) Leaping Deer, Label; "Leaping Deer" 125 mm (5") On Outside Of Upper Pivot Plate, Label; "Leaping Deer" - For Front Center Of Blade, Label; "Leaping Deer", Label; "Leaping Deer" 125 mm (5") - One On Outside Of Rear Cross Tube, Label; "Leaping Deer" 125 mm (5") Located On Outside Of Rear Cross Tube, Label; "Leaping Deer" 125 mm (5") - Located On R.H. Inner Hitch Panel And On Cylinder Mount, Label; "Leaping Deer" 125 mm (5") - Located On R.H. And L.H. Outside Of Main Frame; One On Outside Of Rear Main Frame Cylinder Mount, Label; "Leaping Deer" - Located On Front Of Gooseneck, Label; "Leaping Deer", 125 mm (5"0 Main Frame, Right Side, One On Top Side Of Hitch Support, Main Frame, Left Side, One On Top Side Of Hitch Support, Label; "Leaping Deer" - Located On The Front Of The Gooseneck, Label; "Leaping Deer" 125 mm (5") Centered On Extension Plate For Frame, Centered On Extension Tube Approximately 5" (125 mm) From Rear Edge On Frame Extension, Label; "Leaping Deer" (For Front Center Of 7-Foot Blade), Label; "Leaping Deer" 125 mm (5") - Located On Outside Of Each Side And On Rear Of Main Frame, Label; "Leaping Deer" 125 mm (5") - Located On R.H. Outside And On L.H. Outside Of Main Frame; On Outside Of Rear Main Frame Cylinder Mount	1
JD***38	Label; "John Deere" 75 mm (3") On Outside Of Each Wing, Label; "John Deere" - One On Outside Of Each Wing, Label; "John Deere" Horizontal 75 mm (3") One On Left Side Of L.H. Main Frame And One On Right Side Of R.H. Main Frame, Label; 'John Deere', Label; (B) (C) 'John Deere', Label; (John Deere), Label; "John Deere" - Located On The Right- And Left-Hand Sides Of The Main Frame, Label; "John Deere" 75 mm (3") - Located On Main Frame R.H., On Outside Of Long Tube; Main Frame L.H., On Outside Of Long Tube And One On Rear Of Lower Cross Link, Label; "John Deere" 75 mm (3") Horizontal. One On Outside Of Each Wing., Label; "John Deere" 75 mm (3") - Located On Outside Of Long Frame Tube And On Outside Of Short Frame Tube, Label; "John Deere" 76 mm (3") - Centered On Right Side Of Truss Tube Between Second And Third Bottoms., Label; "John Deere", 75 M (3") Main Frame, Right Side, One On Outside Of Long Tube, Main Frame, Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link, Label, Label; (75 mm X 771 mm), Label; "John Deere" Centered On Left Side Front Of Main Frame Tube, Label; "John Deere" 75 mm (3") Centered On Right Side Of Truss Tube Between Third Bottom And Bearing Tube On Frame, Label; "John Deere" - Located On L.H. Side Of Frame, Not Used On 4-Row, Label; "John Deere" - Located On Front On Toolbar, Label; "John Deere" - Located On L.H. Side Of Frame, Label; "John Deere" 90 mm (3-35/64") Centered On Right Side Of Truss Tube Between Third Bottom And Bearing Tube On Frame, Label; "John Deere", Horizontal 75 mm (3") On Right Side And Rear Of Truss Tube, Label; "John Deere" 75 mm (3") - One On Outside Of Long Frame Tube And One On Outside Of Short Frame Tube, Label; "John Deere"; 75 mm (3") Centered On Left Side Front Of Main Frame Tube, Label; (Sub For Jd5538) 75 mm (3") Centered On Left Side Rear Of Hitch Tube, Label; "John Deere" 75 mm (3") Centered On Left Side Rear Of Hitch Tube, Label; "John Deere" 75 mm (3") - Located On Outside Of Each Side Tube, Label; "John Deere" - Located On Front Edge Of R.H. Outer Tube, Label; "John Deere" 75 mm (3") Located On Rear Cross Tube	2

See all parts with full part numbers in Heavy Parts AI →

Furrow Filler Disk [A21]

John Deere : 440 - Disk : Furrow Filler Disk [A21]

03***99	Bolt; 5/8" X 1-3/4", 4010 And 4020 Tractor, Bolt, Bolt; 5/8" X 1-3/4", Bolt; (A) 5/8" X 1-3/4", Bolt; (B) 5/8" X 1-3/4", Bolt; (C) 5/8" X 1-3/4"	3
03***85	Bolt; 1" X 3-1/2"	1
14***48	Bolt, Nut, Nut; 25.400 mm, Bolt; 1", Nut; 25.400 mm (1"), Nut; 1", Bolt; 1", Category 3n, Nut; 1", (Sub For K40018), Bolt; 1", (Power Rear Wheel Drive), Bolt; 1", (Rg6)	1
A1***83	Washer, Washer; 1.060" X 2" X 1/4", Washer; (Sub For Na1795 And Na3851), Washer; (Sub For H82588)	1

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks - Continued 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A16]

John Deere : 440 - Disk : Gang Bolts And Disks - Continued 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A16]

03***57	Bolt; 5/8" X 2-3/4", (Sub For R27644), Bolt; (E) 5/8" X 2-3/4", Bolt; (B) 5/8" X 2-3/4", Bolt; (C) 5/8" X 2-3/4", Bolt; 5/8" X 2-3/4", Bolt; (D) 5/8" X 2-3/4", Bolt, Bolt; 5/8"X2-3/4" (Sub For R27644), Bolt; (A) 5/8" X 2-3/4", Bolt; 15.875 X 69.850 mm (5/8" X 2-3/4"), Bolt; 5/8" X 2-3/4" (Use With E71938)	36
A2***91	Washer; (Sub (4) A37369), Washer; (B) (C) (D)	4
A3***54	Gang Bolt; (B) 41.275 X 1 596.390 mm (1-5/8" X 62.850"), Gang Bolt; (B) (E) (6 Disk)	2
A3***58	Gang Bolt; (C) (D) (8 Disk), Gang Bolt; (C) (D) 41.275 X 2 165.350 mm (1-5/8" X 85-1/4")	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A14]

John Deere : 440 - Disk : Gang Bolts And Disks 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A14]

A2***59	Disk; (A) 711.200 X 6.500 mm (28" X 0.256"), No. 10p Edge, Disk; (A)	1
A2***67	Disk; (A) 561 X 6.5 mm (22" X .256") 1p Edge, (Solid Spherical Disk), Disk; (A), Disk; (A) (B) 561.300 X 6.500 mm (22.098" X 0.256"), No. 1p Edge, Disk; (A) 561.300 X 6.500 mm (22.098" X 0.256"), No. 1p Edge	1
A2***68	Disk; (A) 558 X 6.5 mm (22" X .256") 10p Edge, (Solid Spherical Disk), Disk; (A) 558.800 X 6.500 mm (22" X 0.256"), No. 10p Edge	1
A3***53	Spacer, Spacer; (B) (C) (D), Spacer; (E)	4

See all parts with full part numbers in Heavy Parts AI →

Gang Frame And Standard 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A13]

John Deere : 440 - Disk : Gang Frame And Standard 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A13]

08***12	Bolt; (B) 3/4" X 7", Bolt; 3/4" X 7-1/2", (Sub For Na3594), Bolt; 19.050 X 177.800 mm (3/4" X 7"), Bolt; 3/4" X 7" (Sub For Mg280316), Bolt; 3/4" X 7", (Sub For 08h4220) (Used With Cast Weight Bracket), Bolt; 3/4" X 7", (Sub For 08h4220) (For 127 X 178 mm (5" X 7") Frame), Bolt; 3/4" X 7", (Use On Tapered Spring), Bolt; 3/4" X 7", 5 X 7 Frame, Bolt; (C) 3/4" X 7", Bolt; (A) 3/4" X 7", Bolt; 3/4" X 7", Bolt; 3/4" X 7" (Hs, Sae 8) (Sub For 08h4220), Bolt; (Used With Cast Weight Bracket), Bolt; 3/4" X 7" (Hs, Sae 8), Bolt; 3/4" X 7" (Use On Tapered Spring)	48
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	48
A3***73	Plate; (C), Plate; (B), Plate; (A), Plate	12
A3***98	Standard; (A) R.H. Front, Standard; (B) (C) R.H. Front, Standard; Right, Standard; R.H. Front	6

See all parts with full part numbers in Heavy Parts AI →

Gang Nut Wrenches [B02]

John Deere : 440 - Disk : Gang Nut Wrenches [B02]

A2***20	Wrench; 1-1/4" Hex, Wrench; Hex. 32 mm (1-1/4"), Wrench; Hex. For 30 mm (1-1/4") Bolts, Gang Frame To Main Frame, Wrench; 32 mm (1-1/4") Hex., Wrench; 32mm (1-1/4"), Wrench; 30 mm (1-1/4"), Wrench; 30 mm (1-1/4") Gang Bolt, Wrench; Hex. 30 mm (1-1/4"), Wrench; 30 mm (1-1/4") Hex., Wrench; Hex., 30 mm (1-1/4"), Wrench; Hex., Wrench; Hex., For 30 mm (1-1/4") Gang Bolt, Wrench; Gang Nut, Hex. 32 mm (1-1/4"), Wrench, Wrench; Gang Nut, Hex, Wrench; 1-1/4"	1
A3***65	Wrench; Sq. For Spacer Nut, Wrench; 85 mm (3-5/16")	1
A3***95	Wrench; 40 mm (1-5/8"), Wrench; Hex. For 40 mm (1-5/8") Gang Nut	1

See all parts with full part numbers in Heavy Parts AI →

Hitch And Hose Clamps [A05]

John Deere : 440 - Disk : Hitch And Hose Clamps [A05]

03***80	Bolt; (D), Bolt; (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 1-1/4" (Sub For 03h1505), Bolt; (A) 3/8" X 1-1/4", Bolt; (E), Bolt; 3/8" X 1-1/4" L.H. Side (Use With 14h812), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/4" (With Skid Plates), Bolt; X 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", For 8n, Bolt; 3/8" X 1-1/4" (21 Used, 18'; 23 Used, 20'), Bolt; 3/8"X1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; (C) 3/8" X 1-1/4", Bolt; (A) (B) (C) (D) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; (A) (B) (C) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", Use With Furrower; For 8- And 12-Row, Bolt; 3/8" X 1-1/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 1-1/4", (4 Used On Diesel Tractor Only), Bolt; 3/8" X 1-1/4" (Sub For 10h1027), Bolt; 9.525 X 31.750 mm (3/8" X 1-1/4"), Bolt; 3/8" X 1-1/4", (A), Bolt	3
03***34	Bolt; 3/8" X 2", 494an And 694an Planters, Bolt; 3/8" X 2", Fertilizer Opener, Bolt, Bolt; 3/8" X 2", Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used) (4.9 M (16-Ft.) Platform, 96 Used), Bolt; (B) 3/8" X 2", Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used) (4.8 M (16-Ft.) Platform, 96 Used), Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used), Bolt; 9.525 X 50.800 mm (3/8" X 2") (36 Used, 6'; 48 Used, 8'), Bolt; 5/16" X 2", Bolt; 3/8" X 2", (Sub For Mg280745), Bolt; 3/8" X 2", (54 Used, 3.7 M (12-Ft.) Platform) (63 Used, 4.3 M (14-Ft.) Platform)	3
08***78	Cap Screw; 1-1/4" X 6", Cap Screw; 1-1/4" X 6", (For 4640 And 4840 Tractors)	1
08***09	Cap Screw; (A) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", Cap Screw; (C) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", 5 X 7 Frame, Cap Screw; (B) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", For 55 mm (2-1/4") Square Toolbar, Cap Screw; 3/4" X 8-1/2", Assemble From Bottom Up	2

See all parts with full part numbers in Heavy Parts AI →

Hitch And Wheel Frame Hydraulic Cylinder 88.9 Mm X 304.8 Mm (3-1/2" Bore X 12" Stroke) [A25]

John Deere : 440 - Disk : Hitch And Wheel Frame Hydraulic Cylinder 88.9 Mm X 304.8 Mm (3-1/2" Bore X 12" Stroke) [A25]

22***42	Set Screw; 1/4" X 5/16", Set Screw; 1/4" X 5/16", (Use With A22156), Set Screw	1
A2***19	Piston, Piston; (Sub Re19696)	1
A2***45	Guide	1
A4***0R	O-Ring; (Sub For Lvu23740), O-Ring; (Use With Re188948), O-Ring; (Sub An130937), O-Ring; (Use With R67064 Or R72672), O-Ring; (Use With Re34518), O-Ring; (Sub For U10289), O-Ring; 6 mm X 40 mm (7/32" X 1-1/2" I.D.), O-Ring; 1.475" X 0.210", O-Ring; (Use With Re34788 Or Re40363), O-Ring; (Use With Re191959 Or Re191960), O-Ring; (A: 8520 (02***33- )), O-Ring; (A), O-Ring; 37.465 X 5.334 mm (1.475" X 0.210"), O-Ring; 37.465 X 5.334 mm, O-Ring, O-Ring; (Use With Re191958), O-Ring; (Use With Re56329 Or Re56330 Or Re56537 Or Re56538), O-Ring; 6 mm X 40 mm (7/32" X 1-1/2") (I.D.), O-Ring, O-Ring; 5.60 mm X 40 mm (7/32" X 1-1/2") I.D., O-Ring; No Longer Used	1

See all parts with full part numbers in Heavy Parts AI →

Hitch Hydraulic Cylinder, Hoses And Fittings [A22]

John Deere : 440 - Disk : Hitch Hydraulic Cylinder, Hoses And Fittings [A22]

AA***40	Hydraulic Hose; 3/4" X 3657 mm X 3/8" (Sub An230312 And (2) T41651), Hydraulic Hose; 3/4" X 3 658 mm (144") X 3/8", Hydraulic Hose; 10 mm X 3 660 mm (3/8" X 144")	2
AA***90	Cylinder; 88.9 mm Bore X 304.8 mm Stroke (3-1/2" X 12") Details See Grid D9, Cylinder, Cylinder; 88.9 mm X 304.8 mm (3-1/2" X 12") (For Parts, See Grid G15), Cylinder; 88.9 mm X 304.8 mm (3-1/2" X 12") Without Clevis Pins And Cotter Pins See Grid K13, Cylinder; 88.9 mm Bore X 304.8 mm Stroke (3-1/2" X 12") Details See Grid D5, Cylinder; 88.9 mm Bore X 304.8 mm Stroke (3-1/2" X 12") Details See Grid I2, Cylinder; 88.9 mm X 304.8 mm (3-1/2" X 12") For Details See Grid K13	1
AN***56	Elbow Fitting; (Sub For At47759), Elbow Fitting; (A) (Use With Aw15577) (Sub For Au13611), Elbow Fitting, Elbow Fitting; 90°, Elbow Fitting; 10 mm X 2 435 mm (3/8" X 96"), Elbow Fitting; (Sub For Au13611), Elbow Fitting; 90°, (Sub For Au13611), Elbow Fitting; (B), Elbow Fitting; (Not Used This Application), Elbow Fitting; (A) (Sub For Au13611), Elbow Fitting; 90° (3/4" Male O-Ring To 3/8" Female Pipe) (Sub For At47759)	2
AR***10	Hydraulic.Quick Coupler P, Hydraulic.Quick Coupler P; (Pressure) (Sub Ar93819), Hydraulic.Quick Coupler P; Assembly,Incl Keys 9-14 (Ord Al27019), Hydraulic.Quick Coupler P; (Sub Ar93819) (Pressure), Hydraulic.Quick Coupler P; (Sub Ar93819), Hydraulic.Quick Coupler P; Pressure (Sub Ar93819), Hydraulic.Quick Coupler P; Pressure, (Sub Ar93819), Hydraulic.Quick Coupler P; (A) (Sub Ar93819), Hydraulic.Quick Coupler P; (Pressure), Hydraulic.Quick Coupler P; Incl Keys 14-18, Hydraulic.Quick Coupler P; Complete (Pressure), Hydraulic.Quick Coupler P; High Pressure, (Sub Ar93819)	1

See all parts with full part numbers in Heavy Parts AI →

Jack [B01]

John Deere : 440 - Disk : Jack [B01]

AA***55	Jack, Jack; (Illustrated) See Grid G13	1
AA***92	Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00*26; 7700-0020; 7800-01**50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650	1
AA***70	Handle; (A: Knob Type), Handle; (A), Handle; For Jack With Green Knob, Handle, Handle; For Jack With Green Knob., Handle; Knob Type, Handle; Green, Handle; For Jack With Green Handle, Handle; (Sleeve Type), Handle; (Knob Type), Handle; (Sub For Aa27831), Grey Knob, Handle; (Sub Pt18656), Handle; (Knob Type) (Sub Pt18656)	1
AA***31	Handle; For Kack With Grey Knob, Handle; Sleeve Type, Handle; (Sub Pt18656) Sleeve Type, Handle; (Sleeve Type), Handle; (Sub Pt20920) (Includes Grey Knob), Handle; (Sleeve Type) (Sub Aa23770), Handle; Grey Knob, (Sub For Aa27831), Handle; For Jack With Grey Knob., Handle; For Jack With Grey Knob, Handle; For Jack With Grey Handle, Handle; (Includes Grey Knob) (Sub Pt18656), Handle; (B), Handle; (Sub Pt18656) (Sleeve Type), Handle; (Sleeve Type) (Sub Pt18656), Handle; (Sleeve Type) (Includes Grey Knob) (Sub Pt18656), Handle; Sleeve Type, (Sub Pt18656), Handle; (Knob Type), Handle; (Includes Grey Knob) (Sleeve Type) (Sub Pt18656), Handle	1

See all parts with full part numbers in Heavy Parts AI →

Leveling Rod And Pivot [A10]

John Deere : 440 - Disk : Leveling Rod And Pivot [A10]

11***48	Cotter Pin; 1/4" X 1"	2
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	2
14***24	Nut; (C) 1-1/4", Nut; (A) (B) 1-1/4", Nut; 1-1/4", Nut; (B) (C) 1-1/4", Nut; (B) 1-1/4", Nut; (A) (B) (C) 1-1/4", Nut; (A) 1-1/4", Nut, Nut; 1-1/4" (Use With An233819), Nut; 1-1/4"	1
19***56	Cap Screw; 5/8" X 1-1/2", (Use With Ae36664 And Ae41988), Cap Screw; (B) 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2", (Rs), Cap Screw; (C) 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2", For 850 And 870, Cap Screw; 5/8" X 1-1/2", Low, Cap Screw; 5/8" X 1-1/2" (Sub For R45693, This Application), Cap Screw; (A), Cap Screw; 5/8" X 1-1/2", (24-Ft. Model Only), Cap Screw; 5/8" X 1-1/2", Re10901, Appl), Cap Screw; 5/8" X 1-1/2", (Sub For Re10901, This Application), Cap Screw; 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2", (Sub For N134341), Cap Screw; 5/8" X 1-1/2", (Sub For R45693), Cap Screw; 5/8" X 1-1/2", (Sub For R45693, This Application), Cap Screw; (A) 5/8"X1-1/2", Cap Screw; 5/8" X 1-1/2", For 15'3" Harrow, Cap Screw; 5/8" X 1-1/2" (Sub For Re10901, Appl), Cap Screw, Cap Screw; (V) 5/8" X 1-1/2", 3/4" Arm, Cap Screw; 5/8" X 1-1/2", (Use With 12h294 And 14h1039), Cap Screw; (A) 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2" (Sub For R45693 Or Re10901, Appl), Cap Screw; 5/8"X1", Cap Screw; 5/8" X 1-1/2", (24 Ft. Only), Cap Screw; 5/8" X 1-1/2" With Strap, Cap Screw; 5/8" X 1-1/2", Fertilizer Opener, Cap Screw; 5/8" X 1-1/2", (Platform Attaching Hardware), Cap Screw; Rh, Cap Screw; 5/8" X 1-1/2", (Sub For R45693 Or Re10901, This Application), Cap Screw; 5/8" X 1-1/2", (Sub For R45693, Appl), Cap Screw; 5/8" X 1-1/2" (Sub For Re10901, This Application), Cap Screw; 5/8" X 1-1/2" (Sub For R45693), Cap Screw; 5/8" X 1-1/2" (Sub For R45693 Or Re10901, Appl), Cap Screw; (A: ( -Xxxxxx) 8560-00*00; 8760-0000; 8960-00**00) 5/8" X 1-1/2", Cap Screw; 3/8"X1/2", Cap Screw; 5/8"X1-1/2" (Sub For R45693), Cap Screw; 5/8" X 1-1/2", For 870, Bolt, Cap Screw; 5/8" X 1-1/2" (To Cylinder Block), Cap Screw; 15.875 X 38.100 mm (5/8" X 1-1/2"), Cap Screw; 5/8"X1-1/2", Cap Screw; 5/8" X 1-1/2" (Sub For Mg88062), Cap Screw; 5/8" X 1-1/2", (Less Side Frames), Cap Screw; 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2", (Sub For R45693 Or Re10901, Appl), Cap Screw; Hs, Sae 8, 5/8" X 1-1/2", Cap Screw; (Sub For Re10901, Appl)	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame, Hitch Support And Gang Attachments [A07]

John Deere : 440 - Disk : Main Frame, Hitch Support And Gang Attachments [A07]

08***52	Cap Screw; 1-1/4" X 16"	8
11***49	Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2"	4
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	33
14***05	Nut; 1" 1", Unc, Nut; 1", Nut	1

See all parts with full part numbers in Heavy Parts AI →

Reflector And Bracket [B03]

John Deere : 440 - Disk : Reflector And Bracket [B03]

14***78	Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01*00; 4255-0100; 4455-0200) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-0030; 8760-0021; 8960-00*36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 10	2
21***48	Screw; 0.190" X 3/4", (Use With Pt9543 Bracket), Screw; 0.190" X 3/4", Red And Amber, Screw; 0.190" X 3/4", Screw; 0.190" X 3/4", Use With Amber And Red Reflectors, Screw; 0.190" X 3/4", Use With Amber And Red Reflector, Screw; 0.190" X 3/4" (A), Screw; Red And Amber, Screw; (A) 0.190" X 3/4", Screw; 0.190" X 3/4", Canada Only, Screw; 4.826 X 19.050 mm, Screw; 4.826 X 19.050 mm (0.190" X 3/4")	2
21***17	Screw; 0.190" X 5/8" (Use With T23460 And T23461 And Ar72960), Screw; 0.190" X 5/8" (Use With Ar72960, T23460 And T23461), Screw; 0.190" X 5/8", Use Wiih Red Reflector, Screw; Red Only, Screw; 0.190" X 5/8", (Diesel, Less Cab), Screw; 4.826 X 15.875 mm (0.190" X 5/8"), Screw; 4.826 X 15.875 mm (0.190" X 5/8"), Screw; (B), Screw; 0.190" X 5/8", (Use With T23460, T23461 And T23463), Screw; 0.190" X 5/8", Screw; 0.190" X 5/8", ( Ffsb107918 No Longer Available), Screw; 0.190" X 5/8", Use With Red Reflectors Only, Screw; No. 10 X 5/8", Screw; 0.190" X 5/8", Mercury, Screw; 0.190" X 5/8", Screw; 0.190" X 5/8", (Sub For Ty4168), Screw; (A) 0.190" X 5/8", Screw; 0.190" X 5/8", Use With Red Reflector Only, Screw; 0.190" X 5/8", Red Only, Screw, Screw; No.10x5/8", Screw; No.10 X 5/8", Screw; 0.190" X 5/8" (Use With T23460 And T23461), Screw; 0.190" X 5/8" (Use With T23462 And T23463), Screw; 0.190" X 5/8", (Use With T23462 And T23463), Screw; 0.190" X 5/8", (Use With T23460 And T23461), Screw; (B) 0.190" X 5/8", Screw; 0.190" X 5/8" (Use With T23460, T23461 And T23463), Screw; 0.190" X 5/8", Use With Red Reflector, Screw; 0.190" X 5/8", Control, Screw; 0.190" X 5/8" (Use With T23460, T23461 And Ar72960), Screw; No 10 X 5/8"	2
A2***66	Bracket; (Sub Aa36031), Bracket; 3/4" X 2" Cap Screw 19h1768 Used To Attach To Outer Frame Plate Of 9-Standard Aa27789 Frame, Bracket	1

See all parts with full part numbers in Heavy Parts AI →

Scrapers (Self-Adjusting) 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A18]

John Deere : 440 - Disk : Scrapers (Self-Adjusting) 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A18]

03***81	Bolt; (A) 3/4" X 3-1/2", Bolt; (D) 3/4" X 3-1/2", Bolt; (C) 3/4" X 3-1/2", Bolt; 3/4" X 3-1/2", Bolt; 3/4" X 3-1/2", (Ru, Rus), Bolt; (B) 3/4" X 3-1/2"	12
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	12
34***31	Spring Pin; (C) 5/16" X 1-1/2", Spring Pin; (B) 5/16" X 1-1/2", Spring Pin; (D) 5/16" X 1-1/2", Spring Pin, Spring Pin; 5/16" X 1-1/2" (2 - 2nd Scv; 3 - 3rd Scv), Spring Pin; (A: 30 Foot) 5/16" X 1-1/2" Center, Spring Pin; 5/16" X 1-1/2", (Sub 19h1947 And K40002) This Application Only, Spring Pin; 5/16 X 1-1/2, Spring Pin; 5/16"X1-1/2", Spring Pin; 5/16" X 1-1/2", Spring Pin; 5/16" X 1-1/2", (Disk), Spring Pin; 5/16" X 1-1/2", (Hoe), Spring Pin; (A) 5/16" X 1-1/2", Spring Pin; 5/16" X 1-1/2" (10' (3 M)) (Sub N281171), Spring Pin; 5/16"X1-3/4", Spring Pin; 5/16" X 1-1/2" Coil (10' (3 M)), Spring Pin; 5/16" X 1-1/2" (2 - 2nd Scv, 3 - 3rd Scv)	64
A2***97	Spring; (C) (Sub A42986) 280 mm (11"), Spring; (B) (Sub A42986), Spring; (D) (Sub A42986), Spring; (E) (Sub A42986) 280 mm (11"), Spring; (E) (Sub A42986), Spring; (C) (Sub A42986), Spring; (D) (Sub A42986) 280 mm (11"), Spring; (A) (Sub A42986), Spring; (Sub A42986), Spring; (A) (B) (Sub A42986), Spring; (C), Spring; (D)	16

See all parts with full part numbers in Heavy Parts AI →

Scrapers (Self-Adjusting) 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A20]

John Deere : 440 - Disk : Scrapers (Self-Adjusting) 3.5 M (11'7"), 4.0 M (13'5"), And 4.5 M (15'2") Sizes [A20]

03***81	Bolt; (A) 3/4" X 3-1/2", Bolt; (D) 3/4" X 3-1/2", Bolt; (C) 3/4" X 3-1/2", Bolt; 3/4" X 3-1/2", Bolt; 3/4" X 3-1/2", (Ru, Rus), Bolt; (B) 3/4" X 3-1/2"	12
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	12
A2***72	Nut; (B) 3/4", (Sub For 24h1400 And 14h794), Nut; 3/4", Nut; (A) 3/4", (Sub For 24h1400 And 14h794), Nut; (C) 3/4", Nut; (C) 3/4", (Sub For 24h1400 And 14h794), Nut; (D) 3/4", Nut; (Tractors In United Kingdom, France, Germany And Sweden), Nut; (B: United Kingdom, France, Germany And Sweden), Nut; 19.050 mm (3/4") (Sub For 24h1400 And 14h1058), Nut; 3/4, Nut, Nut; (A) 3/4", Nut; 3/4", Rear Gang Only, Nut; 19.050 mm (3/4"), Nut; 3/4", (Sub For 24h1400 And 14h794), Nut; (Sub 14h1064, This Application), Nut; (B) 3/4"	12
A2***56	Nut; (B) 5/8", Nut; (C) 5/8", Nut; (B) 5/8", (Sub H87062), Nut; (A) 5/8", Nut; (A) 5/8", (Sub H87062), Nut; (D) 5/8", (Sub H87062), Nut; (C) 5/8", (Sub H87062), Nut; (Sub H87062) Flange	12

See all parts with full part numbers in Heavy Parts AI →

Smv Emblem And Bracket [B04]

John Deere : 440 - Disk : Smv Emblem And Bracket [B04]

14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	2
14***86	Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-0100; 4255-0100; 4455-0200) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-0030; 8760-0021; 8960-0036) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-7000) 9550sh (-7000)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-7000) & 9750sts (-70*00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"	2
19***88	Cap Screw; 5/16" X 5" (Without Cab), Cap Screw; 5/16" X 5", Cap Screw; 5/16" X 5", (Used Without Cab), Cap Screw; 5/16" X 5", Without Cab	2
21***02	Screw; 1/4" X 5/8" (Use With 14h786), Screw; 1/4"X5/8", Screw; 1/4" X 5/8", Screw; 1/4" X 5/8", Use With Endwise Transport	2

See all parts with full part numbers in Heavy Parts AI →

Spindle, Hub And Wheel ( -010649) [A11]

John Deere : 440 - Disk : Spindle, Hub And Wheel ( -010649) [A11]

11***22	Cotter Pin, Cotter Pin; 3400, 3/16" X 2", Cotter Pin; 3/16" X 1-3/4", Cotter Pin; 9/16"X2" (Sub For 11h88), Cotter Pin; 3/16" X 2", (Ru), Cotter Pin; 4.775 X 50.800 mm, Cotter Pin; 3/16" X 2", (Sub 11m7032), Cotter Pin; 3/16" X 2", (614), Cotter Pin; (A) 3/16" X 2", Outer, Cotter Pin; 4.775 X 50.800 mm, Cotter Pin; 3/16"X1-3/4", Cotter Pin; 3/16" X 2", Cotter Pin; (A) 3/16" X 2", Cotter Pin; 3/16"X2", Cotter Pin; (B) 3/16" X 2", Cotter Pin; 3/16" X 2", (814), Cotter Pin; 3/16" X 2", (Rc And St)	1
19***23	Cap Screw; 3/8" X 3-1/4", (Row-Crop), Cap Screw; 3/8" X 3-1/4", (Sub 19h2855), Cap Screw; 3/8"X2-3/4", Cap Screw; 3/8" X 3-1/4", (Rc, St And Ru), Cap Screw; 3/8" X 3-1/4", (Use With E71349), Cap Screw; (A) 3/8"X3-1/4", Cap Screw; 3/8" X 3-1/4" 7/16", Cap Screw; 3/8" X 3-1/4" Rear, Cap Screw; 3/8"X3/4", Cap Screw; (A) 3/8" X 3-1/4", Cap Screw; (Code 3102), Cap Screw; 3/8x3-1/4", Cap Screw; (A: ( -Xxxxxx) 4650-01*34; 4850-00*87) 3/8" X 3-1/4", Cap Screw; 3/8"X3-1/4", Cap Screw; (Less Fan Guard), Cap Screw; (B) 3/8" X 3-1/4", Cap Screw; 3/8" X 3-1/4", (Use With Peanut Shield Only), Cap Screw; 3/8" X 3-1/4", (Less 4-Post Roll-Gard Or Sound-Gard Body), Cap Screw; 3/8" X 3-1/4", (Sub For Gf24616) For 760, Cap Screw; 3/8" X 3-1/4", (Less Rockshaft), Cap Screw; (A: Not Used In U.S. And Canada) 3/8" X 3-1/4" Rear, Cap Screw; 3/8" X 3-1/4" , Up, (Sub For 19h2815, This Application), Cap Screw; 3/8"X3"-1/4" (Sub For 19h2128), Cap Screw; 3/8" X 3-1/4", Use With Peanut Shield, Cap Screw; 3/8" X 3-1/4" (Less Fan Guard) (4250, 4450, 4650, 4850), Cap Screw; X 3/8" X 3-1/4", Cap Screw; 3/8" X 3-1/4", Cap Screw; 3/8" X 3-1/4" (Less Fan Guard), Cap Screw; 3/8"X3", Cap Screw; 3/8" X 3-1/4" 3/8" X 3-1/4", Cap Screw; 3/8"X3-1/4" (Sub For 19h2128), Cap Screw; 3/8"X3"-1/4", Cap Screw; 3/8" X 3-1/4" (4050, 8450), Cap Screw, Cap Screw; 3/8"X3-1/4", (Sub For 19h2128), Cap Screw; (A: Not Used In U.S. And Canada) 3/8" X 3-1/4" Front	1
3***9	Cap; (Sub For W47709 And W52511), Cap; Hub, Cap, Cap; (Sub For W52511), Cap; (C), Cap; (A), Cap; L.H., Cap; (Sub For Q31117), Cap; (Sub For W52511 And W47709), Cap; (B) Lh, Cap; (B), Gear; Bolt - Rod Support, Cap; (Use With A15613 Or Aa14890), Cap; (A) (B) (C) (Sub For Q31117), Cap; Lh	1
AB***40	Spindle, Spindle; (B)	1

See all parts with full part numbers in Heavy Parts AI →

Spindle, Hub And Wheel (010650- ) [A12]

John Deere : 440 - Disk : Spindle, Hub And Wheel (010650- ) [A12]

19***28	Cap Screw; (A: ( -Xxxxxx) Serial No. 4050-00*31; 4250-0042; 4450-0266) 3/8" X 3", Cap Screw; 3/8" X 3", (Also Order R49816, R49819, 34h251, 34h252, 34h297 And 34h299 Unless Previously Installed), Cap Screw; (A) 3/8" X 3", Cap Screw; (B) 3/8" X 3", Cap Screw; 3/8" X 3", (Use With T11234), Cap Screw; 3/8" X 3", (14 X 7 Disk And Hoe), Cap Screw; 3/8" X 3", Codes 2101 And 2103, Cap Screw; 3/8"X3", Cap Screw; 3/8" X 3", (Delco-Remy), Cap Screw; Code 2107 And 2108, Cap Screw; 3/8" X 3", (Sub 19h2458), Cap Screw; 3/8" X 3", (Delco Remy), Cap Screw; 3/8" X 3" (For R66794), Cap Screw; 3/8" X 3", (Dh-03, Gh-01), Cap Screw, Cap Screw; 3/8" X 3", (Use With A24646 Or A24647 And A24651) (Shear), Cap Screw; 3/8" X 3", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8" X 3", (Use With Aa20993 And Aa20994) (Cessna Cylinders Only), Cap Screw; 9.525 X 76.200 mm, Cap Screw; 3/8" X 3" (11'5" - 15'0"), Cap Screw; 3/8" X 3" (Sub 19h2228), Cap Screw; 3/8" X 3" (Spike-Tooth Cylinder), Cap Screw; 3/8" X 3", (4 Used, Variable Drive; 6 Used, Long), Cap Screw; (A: ( -Xxxxxx) 4050-0043 (Qrt)) 3/8" X 3", Cap Screw; 3/8" X 3", (Spike-Tooth Cylinder), Cap Screw; 3/8" X 3", 1350, Cap Screw; 3/8" X 3" (Use With 14h812), Cap Screw; 9.525 X 76.200 mm (3/8" X 3") (Used With Code 1316), Cap Screw; Code 2802 And 6499, Cap Screw; 3/8" X 3" 3/8" X 3", Cap Screw; 3/8" X 3", Code 2101 And 2103, Cap Screw; (A) 3/8"X3", Cap Screw; 3/8" X 3", Shear Bolt, Cap Screw; 3/8" X 3" (Hs, Sae 8), Cap Screw; 3/8" X 3", Upper, Cap Screw; 3/8" X 3" (For R60827), Cap Screw; 3/8" X 3" (Use With Delco-Remy), Cap Screw; 3/8"X3" (For R66794), Cap Screw; 3/8" X 3", 2350, Cap Screw; 3/8" X 3", Cap Screw; 3/8" X 3", (Use With Aa20993 And Aa20994) For Cessna Cylinders Only, Cap Screw; (C) 3/8" X 3", Cap Screw; 3/8" X 3" (Qrt) (Nlr), Cap Screw; 3/8" X 3", For 509b And 510b, Cap Screw; (A: Quad-Range Transmission) 3/8" X 3", Cap Screw; 3/8" X 3", (Use With R78123), Cap Screw; 3/8"X2-1/8", Cap Screw; (B: Quad-Range Transmission) (E: ( -Xxxxxx) 4050-00**43 (Qrt)) 3/8" X 3", Cap Screw; 3/8" X 3", (8 Used For 714, 714a; 10 Used For 716, 716a), Cap Screw; 3/8" X 3" (Use With R78123), Cap Screw; 3/8"X3" (For R60827)	1
24***56	Washer; 1-1/32" X 2" X 0.194", (Sub 24h1138), Washer; 1-1/32" X 2" X 0.194", Washer; 1-1/32" X 2" X 0.194", (Sub For Na1628)	1
28***13	Spacer; 1-1/2" X 1.900" X 2", Spacer, Spacer; 1-1/2" X 2"	1
34***84	Spring Pin; (A: Parts In Ae50743 Twine Arm Assembly) 3/16" X 1-1/4", Spring Pin; 3/16" X 1-1/4" ( Sub For 34m7029), Spring Pin; (A) 3/16"X11/4", Spring Pin; 3/16" X 1-1/4" (A), Spring Pin; (A: Parts In Ae50742 Twine Arm Assembly) 3/16" X 1-1/4", Spring Pin; 3/16" X 1-1/4" (Use With Ar78526), Spring Pin; (A) 3/16x11/4, Spring Pin, Spring Pin; 3/16" X 1-1/4", Spring Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 3/16" X 1-1/4", Spring Pin; (B) 3/16"X1-1/4", Spring Pin; 3/16"X1-1/4", Spring Pin; 3/16" X 1-1/4", (Posi-Torq Drive Only), Spring Pin; (A) 3/16"X1-1/4", Spring Pin; 3/16" X 1-1/4" (Posi-Torq Drive Only), Spring Pin; 4,77 X 31,75 mm, Spring Pin; 0,188" X 1,25", Spring Pin; (A) 3/16"X 11/4", Spring Pin; 3/16" X 1-1/4"	1

See all parts with full part numbers in Heavy Parts AI →

Wear Guard (1978- ) [B05]

John Deere : 440 - Disk : Wear Guard (1978- ) [B05]

03***64	Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)	2
A3***57	Guard	1
K4***15	Lock Nut; (Sub For Bp14495) R.H., Lock Nut; 5/8 -11 Unc, Lock Nut; 5/8" (4 Used For Single Reach, 8 Used For Reach With W25912) (Sub For H35925 And W22657), Lock Nut; (B: For Wing Section) 15.875 mm, Lock Nut; 5/8", Surtir Con Ap39650, Lock Nut; 5/8", (Sub For Bp14495), Lock Nut; 5/8", Qty. Per Rotor, Lock Nut; 15.875 mm (5/8") (Sub For H35925), Lock Nut; 15.875 mm R.H., Lock Nut; 5/8", (20 Used L.H.) (20 Used R.H.), Lock Nut; (Sub For H35925), Lock Nut; (C) (D) 5/8", Lock Nut; (A) 5/8", Lock Nut; (8' And 10' Main Frame), Lock Nut; 5/8", (Sub For H35925 And W22657), Lock Nut; (Optional), Lock Nut; 5/8", (Sub For U44915 And Bp14495), Lock Nut; 5/8", (Sub For E37470 Or H35925), Lock Nut; 5/8", 120 Flail Shredder - Qty. Per Rotor, Lock Nut; 5/8", 115 Flail Shredder - Qty. Per Rotor, Lock Nut; (Sub For H35925) (Sub For E37470, This Application), Lock Nut; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer), Lock Nut; 8' And 10' Machines Only, Lock Nut; 5/8", For Center Cut Knives - Qty. Per Rotor, Lock Nut; 15.875 mm (5/8") 5/8", Lock Nut; X 5/8" (Sub For 14h760), Lock Nut; (B: 12.5 Foot) 15.875 mm (5/8"), Lock Nut; 28', Lock Nut; 5/8", (Use With N141174), Lock Nut; 5/8", (Sub For H35925), Lock Nut; 15.875 mm, Lock Nut; 15.875 mm (5/8") R.H. Thread, Lock Nut; (Sub For A15548), Lock Nut; 5/8", Furnish With Ap39650, Lock Nut; (B: For Wing Section), Lock Nut; 5/8", (Sustitucion Para (3) H35925), Lock Nut; (D) 5/8", Lock Nut; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) (D: Mainframe, (5 Section) Singlepoint), Lock Nut; 5/8", Lock Nut, Lock Nut; (Sub For E37470 Or H35925), Lock Nut; (C) 5/8", Lock Nut; (Sub For P49075 Or H35925), Lock Nut; (B) (C) 5/8", Lock Nut; 5/8", (4 Used For Single Reach, 8 Used For Reach With W25912), Lock Nut; 5/8", (16'0" Flex Fold), Lock Nut; (Sub For U44915, This Application) (A), Lock Nut; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) (D: Main Frame (5 Section) Single Point), Lock Nut; 5/8", (Sub For A15548), Lock Nut; (For Pulley Not Shown), Lock Nut; Rh, Lock Nut; 5/8", Replaces K40014 Nut, Lock Nut; 15.875 mm Pivot (Standard), Lock Nut; (B) 15.875 mm (5/8"), Lock Nut; 5/8", (Sub For Bp14495, W22657 And H35925), Lock Nut; 5/8" (Sub For H35925), Lock Nut; 15.875 mm (Sub For N280544, This Application), Lock Nut; (Sub For Bp14495), Lock Nut; (E) 5/8", Lock Nut; (E), Lock Nut; (A) (B) 5/8", Lock Nut; (Sub For N280544, This Application), Lock Nut; (A), Lock Nut; 5/8", (Cab Only), Lock Nut; (A: For Ballast Attachment), Lock Nut; 36', Lock Nut; (Use With An280775), Lock Nut; (Use With N241190), Lock Nut; (B) 5/8", Lock Nut; 5/8", Front Stop, Lock Nut; (A: 27 Ft - 9 In) (B: 30 Ft - 9 In (Illustrated)), Lock Nut; 5/8", (Sub For 14h1039), Lock Nut; (F) 5/8", Lock Nut; R.H. Thread, Lock Nut; 15.875 mm (5/8"), Lock Nut; (C), Lock Nut; 5/8" (Sub For E37470), Lock Nut; (For Pulley-Not Shown), Lock Nut; (8' And 10' Main Frames), Lock Nut; 5/8", 118 Flail Shredder - Qty. Per Rotor, Lock Nut; (R) 5/8", (Order An280995), Lock Nut; 5/8", (Sub For H35925) (Sub For E37470, This Application), Lock Nut; For Ballast Attachment, Lock Nut; 8' And 10' ( Machines Only), Lock Nut; (B), Lock Nut; (A: Qtys Listed For Both Sides)	2

See all parts with full part numbers in Heavy Parts AI →

Wheel Frame Hydraulic Cylinders, Hoses And Fittings [A23]

John Deere : 440 - Disk : Wheel Frame Hydraulic Cylinders, Hoses And Fittings [A23]

11***55	Cotter Pin; 5/16" X 2", Use A3581r Or 11h255 (Sub 11m7056), Cotter Pin; (A: For 4 And 5 Bottoms Plow) 5/16" X 2", Cotter Pin, Cotter Pin; 5/16" X 2", (Included With Cylinder), Cotter Pin; 5/16" X 2", Cotter Pin; (B) 5/16" X 2", Cotter Pin; 5/16" X 2", (Sub For 11m7056), Cotter Pin; 5/16" X 2" (Included With Cylinder), Cotter Pin; 7.925 X 50.800 mm (5/16" X 2")	8
24***76	Washer; 1-5/16" X 2-1/2" X 0.149", 36' And 42', Washer; (A: 40 Ft Drill) (B: 42 Ft Drill) 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149" 36 Ft And 42 Ft, Washer; 1-5/16" X 2-1/2" X 0.149" 30 Ft; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149", (For 21 Foot Machine), Washer; 1-5/16" X 2-1/2" X 0.149" 36 Ft And 42 Ft; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149" 30 Ft, Washer; 1-5/16" X 2-1/2" X 0.149", (20 Used On 21-Foot, 16 Used On 28, 31 And 41 -Foot), Washer; 1-5/16" X 2-1/2" X 0.149", (21-Foot), Washer; 1-5/16" X 2-1/2" X 0.149", 30'	4
A1***68	Tie Band; 230 mm (9"), Tie Band; (Sub N189220), Tie Band; 485 mm (19"), Tie Band, Tie Band; (Sub For E1856m), Tie Band; Hose Clamp, Large	3
A3***70	Pin; (B: Mast) (Cat-Iii), Pin; 31.750 X 127 mm (1-1/4" X 5"), Pin; Mast, Pin, Pin; (B: Mast), Pin; 1-1/4" X 5", Pin; 31.750 X 127 mm	4

See all parts with full part numbers in Heavy Parts AI →

Wheel Frame [A09]

John Deere : 440 - Disk : Wheel Frame [A09]

AA***69

Axle

See all parts with full part numbers in Heavy Parts AI →

Need a specific 440 - DISK part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.