John Deereharvester, ensilage and forage(no series)

John Deere 3955 - HARVESTER, ENSILAGE AND FORAGE

Specifications · OEM parts breakdown

Search live 3955 - HARVESTER, ENSILAGE AND FORAGE parts Source or supply its parts

Post a parts request and compare supplier quotes.

John Deere 3955 - HARVESTER, ENSILAGE AND FORAGE specifications

Engine

PTO Speed

1,000 rpm

Dimensions

Feedroll Opening

696.6 cm² (107.9 sq. in.)

Performance

Driveline	Cat. 5 (tractors up to 150hp)
Number of Knives	36

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

3955 - HARVESTER, ENSILAGE AND FORAGE common service parts

Part number	Part	Notes
T26955	Clamp	Scheduled service item	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

All 3955 - HARVESTER, ENSILAGE AND FORAGE assemblies by section

Every catalogued assembly group for the John Deere 3955 - HARVESTER, ENSILAGE AND FORAGE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Cutterhead And Feedrolls

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Auger And Fan Drive Shields

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
19***38	Cap Screw; 3/8" X 1/2", (Appl), Cap Screw; 3/8" X 1/2" (Appl), Cap Screw; 3/8" X 1/2", (A/C Factory Installed), Cap Screw; 3/8"X1/2", Cap Screw; 3/8" X 1/2", (2901), Cap Screw; 3/8" X 1/2" Not Used This Application, Cap Screw; 3/8" X 1/2", W/ 24m7096 & A4773r, Cap Screw; 3/8" X 1/2" (A), Cap Screw; 3/8"X5 1/2", Cap Screw; 3/8" X 1/2" Power Shaft Shifter Return Piston Stop Hole, Cap Screw; 3/8" X 1/2", Cap Screw; 3/8"X1/2" Low, Cap Screw, Cap Screw; (A) 3/8"X1/2", Cap Screw; 3/8" X 1/2" (B), Cap Screw; 9.525 X 12.700 mm (3/8" X 1/2"), Cap Screw; 3/8" X 1/2" (8630, 5460, 5820), Cap Screw; (A) 3/8" X 1/2", Cap Screw; 3/8" X 1/2", Inner, Cap Screw; 3/8" X 1/2", Cap Screw; 3/8" X 1/2", (Sub For E44341), Cap Screw; 3/8" X 1/2", (Afd - No Longer Required), Cap Screw; 3/8" X 1/2", (Used With Code 1906)	2
19***64	Cap Screw; 5/16" X 3/4", (Without Alternator Shield), Cap Screw; (A) 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (Less Spout-Trak), Cap Screw; 5/16" X 3/4" (United Kingdom Only), Cap Screw, Cap Screw; 5/16" X 3/4" (With Mechanical Front Wheel Drive), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (3.7 M (12-Ft.) Platform Less Conditioner), Cap Screw; 5/16" X 3/4" (Hs, Sae 8), Cap Screw; 5/16" X 3/4", Cap Screw; 5/16" X 3/4" (30"), Cap Screw; 5/16" X 3/4", (Use Without Alternator Shield), Cap Screw; 5/16" X 3/4" Hs, Sae 8, Cap Screw; 5/16" X 3/4", Hs, Sae 8, Cap Screw; 5/16"X3/4", Cap Screw; 5/16" X 3/4", (Sub 19h1900), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (Sub For 19h1112), Cap Screw; 5/16" X 3/4", (Hs, Sae 8), Cap Screw; (A: For Engine (Cd6068hz001)) 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (Sae 8), Cap Screw; (A) (B) 5/16" X 3/4", Cap Screw; 5/16" X 3/4" (4 Used, 30") (10 Used, 38"), Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Cap Screw; 5/16" X 3/4" (Nla), Cap Screw; 5/16" X 3/4" (Sub E33233), Cap Screw; 7.925 X 19.050 mm, Cap Screw; 5/16" X 3/4", (Code 2912), Cap Screw; 5/16" X 3/4" (16 Used, 30") (15 Used, 38"), Cap Screw; 5/16" X 3/4" (Less Spout-Trak), Cap Screw; 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (3-Rrc), Cap Screw; 5/16" X 3/4", (Use With R108741), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (Sub For Et10723), Cap Screw; (D) 5/16" X 3/4" (Hs, Sae 8), Cap Screw; 5/16" X 3/4" (Sae 8)	2
19***21	Cap Screw; 1/4" X 1-1/2", (Sub For Mg280112), Cap Screw; 1/4" X 1-1/2", L.H., Cap Screw; 1/4" X 1-1/2", (12, 15 And 18 Ft. W/Conditioner), Cap Screw; 1/4" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/4" X 1-1/2", Cap Screw; 1/4" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/4" X 1-1/2", (Hs,Sae 8), Cap Screw; (A) 1/4" X 1-1/2", Cap Screw; 6.350 X 38.100 mm, Cap Screw; 6.350 X 38.100 mm, Incld In 17, Cap Screw; 1/4" X 1-1/2", Used With Item 5	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Auger And Fan Shaft Housing And Shield

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	1
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	3
11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	1
19***39	Bolt; 3/8" X 1-1/4" (Use With Standard Rasp Bars), Bolt; 3/8" X 1-1/4", (Sub For 19h1732), Bolt; 3/8" X 1-1/4" 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 9.525 X 31.750 mm, Bolt; 3/8 X 1-1/4", Bolt; 3/8" X 1-1/4" Sae 8, Bolt; 3/8" X 1-1/4" (1a), Bolt; 3/8" X 1-1/4" 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (12 Teeth) (Use With At20830), Bolt; 3/8" X 1-1/4", (Use With Re25890 And R94218) (Rear), Bolt; 3/8" X 1-1/4", (Sae 8), Bolt; 3/8"X1-1/4" (For L32670), Bolt; 3/8" X 1-1/4", (1 Used L.H.) (1 Used R.H.), Bolt; 3/8" X 1-1/4" (Hs, Head Marked 10.9), Bolt; 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8"X1-1/4", For 3179dl013, Bolt; (A: For 9650 Cts Combine (69*10- )) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1-1/4", Bolt; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (8.8), Bolt; 3/8"X1-1/4", For 3179dl016, Bolt; 3/8" X 1-1/4" (Use With R86007), Bolt; 3/8"X1-1/4", For 3179dl004, Bolt; 3/8"X1-1/4" (Ord 19h1731), Bolt; 3/8"X1-1/4", For 3179dl001, Cap Screw; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304) (Key 2, Page 15-7), Bolt; 3/8" X 1-1/4" (24 And 224 Balers), Bolt; (A: Included In Ae48634) 3/8" X 1-1/4" Not Used W/L.H. Gage Wheel, Bolt; (B) 3/8"X1-1/4", Bolt, Bolt; 3/8" X 1-1/4", Hs, Sae 8,, Bolt; 3/8" X 1-1/4" Torque To 36 Lb-Ft (49 N-M), Bolt; 3/8" X 1-1/4" (Use With Re501693 Or Re502196), Bolt; (A) 3/8"X1-1/4", Bolt; 3/8" X 1-1/4" (Sub For R53661), Bolt; 3/8"X1-1/4" (Sub For 19h1732), Bolt; Hd, Sae 8, 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With Ar87583 Or Ar102218), Bolt; 3/8" X 1-1/4", (Ea-D, De-01), Bolt; 3/8" X 1-1/4" (Use With Re25890 And R94218) (Rear), Bolt; 3/8" X 1-1/4", Code 2111, Bolt; 3/8" X 1-1/4", (Code 4100 Or 4199), Bolt; 3/8" X 1-1/4", Full Thread, Bolt; 3/8" X 1-1/4", (9139), Bolt; 3/8" X 1-1/4", (Sub For M1112t, This Application), Bolt; (C) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4", Torque To 36 Lb-Ft (49 N-M), Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates), Bolt; 3/8" X 1-1/4" With Air Conditioning, Bolt; 3/8" X 1-1/4", (Sub For F2273r, This Application), Bolt; Hs, Sae 8, 3/8" X 1-1/4", Bolt; (A) (B) (D) (E) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", R.H., Bolt; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1-1/4" 3/8"X1-1/4" (Sae 8), Bolt; 3/8" X 1-1/4", (Pickup Reel), Bolt; 3/8" X 1-1/4" (Sub For 19h1732), Bolt; 3/8" X 1-1/4", (Na-D, Dn-01), Bolt; 3/8" X 1-1/4" (Rear), Bolt; 3/8" X 1-1/4" Hs, Sae 8, Bolt; 3/8" X 1-1/4" (B), Bolt; 3/8" X 1-1/4" 3/8"X1-1/4", Bolt; 3/8" X 1-1/4" Hs Sae 8, Bolt; 3/8" X 1-1/4" (Sae 8), Front, Bolt; (A), Bolt; (B) 3/8" X 1-1/4", Bolt; (B) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4", (2512,9139), Bolt; (A) (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", Torque To 46 Lb-Ft (63 N-M), Bolt; 3/8" X 1-1/4", (Use With T142647), Bolt; 3/8" X 1-1/4", L.H., Bolt; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With Re502196), Bolt; 3/8"X1-3/4", Bolt; 3/8" X 1-1/4", (Use With Standard Rasp Bars), Bolt; 3/8" X 1-1/4", (3014), Bolt; 3/8" X 1-1/4", (Code 2111), Cap Screw, Bolt; 3/8" X 1-1/4", (8.8), Bolt; 3/8" X 1-1/4", (Use With 12h304), Bolt; 3/8" X 1-1/4" (Water Pump Inlet To Cover), Bolt; (B) (C) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4, Bolt; 3/8" X 1-1/4", (3006), Bolt; (A) 3/8"X1-1/4" (Marked L39906), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (10.9), Bolt; 3/8" X 1-1/4" (Sub For M1112t, This Application), Bolt; 3/8" X 1-1/4" Not Used With L.H. Gauge Wheel, Bolt; (Code 1304, 1320), Bolt; 3/8"X1-3/8", Bolt; (A: For 9650 Combine (6907- ) Also Serial Nos. 6994, 6995, 6901, 6902 And 69**05.) 3/8" X 1-1/4", Bolt; 3/8"X1-1/4", (For 3179dl016), Bolt; 3/8" X 1-1/4" (Sae 8), Bolt; 3/8" X 1-1/4" (Hs, Sae 8 ), Bolt; 3/8" X 1-1/4", (Code 1701, 1702 And 1703), Bolt; 3/8" X 1-1/4", (Bat Reel), Bolt; 3/8"X1-1/4", (For 3179dl001), Bolt; (B: W/O Cab) 3/8" X 1-1/4", Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", Hs, Sae 8, Bolt; 3/8" X 1-1/4", (Ha-D, Hb-D), Bolt; 3/8" X 1-1/4" (Hs, Sae 8) (Lower Holes), Bolt; (B) (C) 3/8" X 1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Hs, Sae 8) (Use With Re502196)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Cantilevered Auger And Drive

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	5
03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	2
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	8
03***80	Bolt; (A) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", Round Head, Bolt; 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", (Use With B31500), Bolt; (C) 5/8" X 2-1/2", Bolt; (B) (C) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", (Use With Aa34357), Bolt; (B) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2" (A)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Cutterhead And Chain Couplers

11***07	Cotter Pin; 2 X 10mm, Cotter Pin, Cotter Pin; 2 X 12 mm, Cotter Pin; 2 X 10 mm, Cotter Pin; 2 X 10 mm, (Sub For 11h232)	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	4
19***68	Cap Screw; 1/2" X 3-3/4" (L.H. Rear), Cap Screw; 1/2" X 3-3/4", L.H., Cap Screw; 1/2"X3-3/4", Cap Screw; 1/2" X 3-3/4", Cap Screw; (Use With K40014), Cap Screw; 1/2" X 3-3/4" (Hs, Sae 8), Cap Screw, Cap Screw; 1/2" X 3-3/4", (Use With Adjustable Gauge Wheel), Cap Screw; 1/2" X 3-3/4" (1000 Rpm), Cap Screw; 1/2" X 3-3/4" (Sub For 19h1945)	10
19***44	Cap Screw; (A) 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Sae 8) Up, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4" Inner, Cap Screw, Cap Screw; 5/8" X 2-1/4" Hs, Sae 8, Cap Screw; 5/8" X 2-1/4" Hs=8 Sae, Cap Screw; (C) 5/8" X 2-1/4", Hs, Sae 8, Cap Screw; (J) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Sae 8) Up, Cap Screw; 5/8" X 2-1/4" (Rh Side), Cap Screw; 5/8" X 2-1/4", Up, Cap Screw; 5/8" X 2-1/4", Hs, Sae 8,, Cap Screw; 5/8" X 2-1/4" Hs 8 Sae, Cap Screw; 5/8" X 2-1/4", Hs, Sae 8, Cap Screw; 5/8"X2-1/4", Cap Screw; (C: Code 4402 Electronic Tach) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Hs, Sae 8) (Use With 18.4-38, 20.8-34 Or 23.1-30 Tires), Cap Screw; 5/8" X 2-1/4", (Code 1405)	4

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Cutterhead Housing

03***95	Bolt; 3/8"X1-1/2", Bolt; 3/8"X1-1/2" (Sub For 03h1468), Bolt; 3/8" X 1-1/2" (Use With H127801), Bolt; 3/8" X 1-1/2", (22 Used On 18', 26 Used On 21' And 25' And 30 Used On 30'), Bolt; 3/8" X 1-1/2", (16 Used On 15' And 18', 20 Used On 21' And 25', 24 Used On 30'), Bolt; 3/8" X 1-1/2" (L.H. End - 4 Used; R.H. End - 2 Used, 1st And 4th Holes), Bolt; 3/8" X 1-1/2" (Rh), Bolt; 9.525 X 38.100 mm (3/8" X 1-1/2"), Bolt; 3/8" X 1-1/2", (40-Foot Boom), Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2" (Rigid), Bolt; 3/8" X 1-1/2" (Bolted Sections), Bolt; 3/8" X 1-1/2", (6 Used For 660, 8 Used For 680), Bolt; 3/8" X 1-1/2" Repair Kit, Bolt; 3/8"X1-1/2" (Sub For 03h1468 Appl), Bolt; 3/8" X 1-1/2" Lh, Bolt; 3/8" X 1-1/2", (Variable Drive)	3
03***57	Bolt; 1/2"X3-1/2", Bolt; (A) 1/2" X 3-1/2", Bolt; 1/2" X 3-1/2", Bolt; 1/2" X 3-1/2" (1/2" X 4" Required With Feed Roll Pan), Bolt; 1/2" X 3-1/2" (Required With Feed Roll Pan)	2
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	5

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Cutterhead Housing Covers

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	11
11***85	Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480"	4
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	1
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	4

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Decal Plate (Use With Corn Head Adapter) (Xxxxxx - )

21***27	Screw, Screw; 1/4" X 3/4", Screw; 1/4" X 3/4" (Use With 14h786)	4
AE***63	Plate	1
AE***64	Plate; Kit, Includes All Parts	1
E8***38	Decals; North America (Sub For E74457), Decals; Feed Drive Entanglement, Decals; Feedroll Entanglement, Decals, Decals; (Sub For E74457) Feed Drive Entanglement, Decals; Stationary Operation, (Sub For E74457), Decals; Feedroll Entanglement, (Sub For E74457)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Fan And Fan Shaft

03***99	Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)	8
03***31	Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/2", Wide Front, Bolt; 1/2" X 1-1/2", Rd. Hd., Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/2", (Use With Ae37450), Bolt; 1/2" X 1-1/2", (3.7 M (12-Ft.), 7 Used) (4.3 M (14-Ft.), 9 Used), Bolt; 1/2" X 1-1/2" Wide Front, Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" L.H., Bolt; 35/64" X 27/32" X 3/8", Bolt; 1/2"X1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Rigid), Bolt; 1/2" X 1-1/4", Bolt; 1/2" X 1-1/2" Lh, Bolt; 1/2" X 1-1/2" (213-5 Used; 215 And 216-6 Used; 218-7 Used; 220, 222, 224-8 Used)	4
03***46	Bolt; (C) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4" L.H., Bolt; 1/2" X 1-1/4" (Flexible), Bolt; 1/2" X 1-1/4", (For 1985 Machines And Up), Bolt; 1/2" X 1-1/4" (A), Bolt; 1/2" X 1-1/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 1/2" X 1-1/4", Bolt; (Use With E64519), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4") (1253a), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4" Grass Seed Special, Bolt; 1/2" X 1-1/4", Bolt; 1/2"X31,7, Bolt, Bolt; 1/2" X 1-1/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, 224-16 Used), Bolt; 1/2" X 1-1/4", (United Kingdom Only), Bolt; 1/2"X1-1/2", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (327, 336, 337, 346 And 347 Balers), Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/4", Gr. 8	4
03***41	Bolt; 1/2" X 2-1/4", Bolt; 1/2" X 2-1/4", Full Thread	4

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Fan Housing

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
03***19	Bolt; 1/2" X 1", Bolt; 1/2" X 1", Hs, Sae 8,	8
03***37	Bolt; 1/2" X 1-1/2", Hs, Sae 8,, Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (Hs, Sae 8)	6
19***26	Cap Screw; 3/8" X 2-1/4" (Round Shaft), Cap Screw; 3/8" X 2-1/4", (6211), Cap Screw; 3/8" X 2-1/4", For 5 Section, Cap Screw; 3/8" X 2-1/4", (Ea-D, De-01), Cap Screw; 3/8" X 2-1/4", (120 Used L.H.) (120 Used R.H.), Cap Screw; 3/8" X 2-1/4", (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8"X2-1/4", For 3179dl004, Cap Screw; 3/8" X 2-1/4" Low, Cap Screw; 3/8" X 2-1/4", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G), Cap Screw; (A) Roosa Master Dp,3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.9 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4, Cap Screw; (D) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" (Sub For 19h1164), Cap Screw; 3/8"X2-1/4", For 3179dl001, Cap Screw; 3/8" X 2-1/4", (Na-6, Gn-01), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.8 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8"X2-1/4", For 3179dl016, Cap Screw; 3/8" X 2-1/4", For 7 Section, Cap Screw; 3/8" X 2-1/4", (Gh-01), Cap Screw; (A: ( -Xxxxxx) 4250-00*71; 4450-0105) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (4219 Dn-02), Cap Screw; 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", W/ 24m7106, Cap Screw; 3/8" X 2-1/4", Code 6201, Cap Screw; 3/8"X2-1/4" (Sub For 19h255), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sae 8), Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (10 Used, 1217; 13 Used, 1219) Each Additional Tooth Bar, Cap Screw; 3/8" X 2-1/4", (Ha-G), Cap Screw; 3/8" X 2-1/4", (2514,9701), Cap Screw; 3/8" X 2-1/4", (Use With Single Selective Control), Cap Screw; 3/8" X 2-1/4" (Sae 8), Cap Screw; 3/8" X 2-1/4", (Code 6202), Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4" (Qrt), Cap Screw; 3/8"X2-1/4", For 3179dl013, Cap Screw; 3/8" X 2-1/4", (Use With R50415), Cap Screw; 3/8" X 2-1/4", (Ea-6), Cap Screw; 3/8 X 2-1/4", Cap Screw; 3/8" X 2-1/4", (2514,9138), Cap Screw; 3/8" X 2-1/4", (Use With Re19944), Cap Screw; (A) (B) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sub For 19h1164), Cap Screw; 3/8" X 2-1/4" (A), Cap Screw; 3/8" X 2-1/4", (Sub For 19h1819, This Application), Cap Screw; (B) 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4" (For Ar97712), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4", (To Bolt Bracket To Cab), Cap Screw; (A) 3/8"X2-1/4" \|, Cap Screw; 3/8" X 2-1/4", (9138), Cap Screw; (B) 3/8" X 2-1/4", Cap Screw; (A) 3/8" X 2-1/4", Cap Screw; (B: Power Shift Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (Na-D, Dn-01), Cap Screw; 3/8"X2"-1/4", Cap Screw; 3/8" X 2-1/4" (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8" X 2-1/4", Hs, Sae 8, 3/8" X 2-3/8" (Code 2111), Cap Screw; 3/8" X 2-1/4" (Upper), Cap Screw; 3/8" X 2-1/4", (40 Used,1217;65 Used,1219), Cap Screw; 3/8" X 2-1/2" (Sub For 19h1733), Cap Screw; 3/8" X 2-1/4", (Upper), Cap Screw; 3/8" X 2-1/4", For 503b And 506b, Cap Screw; 3/8" X 2-1/4" (To Bolt Bracket To Cab), Cap Screw; 3/8" X 2-1/4" (Sub For H86656), Cap Screw; 3/8" X 2-1/4" L.H., Cap Screw; 3/8" X 2-1/4", (Rc, Ru, Rus), Cap Screw; 3/8" X 2-1/4" Front, Cap Screw; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Less Cab), Cap Screw; 3/8" X 2-1/4", (Ha-D, Hb-D), Cap Screw; 3/8" X 2-1/4" Sub For 19h1164, Cap Screw; 3/8" X 2-1/4", (18 Used Per Tooth Bar, 3.7 M (12-Ft.) (21 Used Per Tooth Bar, 4.3 M (14-Ft.), Cap Screw; 3/8" X 2-1/4" (Use With R50415), Cap Screw; (A) 3/8"X2-1/4", Cap Screw, Cap Screw; (D) 3/8" X 2-1/4", (17'-11" Through 26'-5"), Cap Screw; (For 24m7106), Cap Screw; 3/8" X 2-1/4" (Use With 12h304 And 14h812), Cap Screw; (A) 7.50-16 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Cap Screw; 3/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 9.525 X 57.150 mm, Cap Screw; 3/8"X2-1/4" (W/ At19509), Cap Screw; 3/8" X 2-1/4" (Use With 14h812), Cap Screw; 3/8"X2-1/4" (For At19509), Cap Screw; 3/8" X 2-1/4" (Dn-03, Nb-D), Cap Screw; 3/8" X 2-1/4", For 6 Section, Cap Screw; 3/8" X 2-1/4", (9140), Cap Screw; 3/8" X 2-1/4", No. 19 Hitch, Cap Screw; 3/8" X 2-1/4", (Diesel), Cap Screw; (A) 3/8"X2-1/4" (Marked L41202), Cap Screw; 3/8" X 2-1/4", L.H., Cap Screw; 3/8" X 2-1/4", (2513,9140), Cap Screw; (A: ( -Xxxxxx)4560-0027;4760-0050;4960-00**54) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/2"	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Feed Roll Arms

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2
19***83	Cap Screw; 3/8" X 1-1/8" Up, Cap Screw; 3/8"X1-1/8", Cap Screw; (B: Engine Serial No.) 3/8" X 1-1/8", Cap Screw; 9.525 X 28.575 mm, Cap Screw; 3/8" X 1-1/8" Sae 8; Low, Cap Screw; 3/8" X 1-1/8", (Sae 8) Low, Cap Screw; 3/8" X 1-1/8" Hs= 10.9; Sae 8 Sub For 19h1139, Cap Screw; 3/8" X 1-1/8", (Use With R58717), Cap Screw; (Use With R111388), Cap Screw; 3/8" X 1-1/8", (Use With (4) 12h304) (6506, 6568), Cap Screw; 3/8" X 1-1/8" (Use With R111388, Appl), Cap Screw; 3/8" X 1-1/8" (Sae 8) Low, Cap Screw; 3/8"X1-1/8"), Cap Screw, Cap Screw; 9.525 X 28.575 mm (3/8" X 1-1/8") (Sub For 19h2552), Cap Screw; 3/8" X 1-1/8", (Sub For 19h2552), Cap Screw; 3/8" X 1-1/8", (Use With R86061), Cap Screw; 3/8" X 1-1/8", (Sub For 19h2552) (Sae 8), Cap Screw; 3/8" X 1-1/8" Hs, Sae 8, Cap Screw; 3/8" X 1-1/8" (Sae 8), Cap Screw; (3510), Cap Screw; 3/8" X 1-1/8" Sae 8, Cap Screw; 3/8" X 1-1/8", (4219 Dn-02), Cap Screw; 3/8" X 1-1/8" (Hn001), Cap Screw; 3/8" X 1-1/8", (Sub 19h3411, This Application), Cap Screw; 3/8" X 1-1/8" (Hs, Sae 8) (Sub For 19h1139), Cap Screw; 3/8" X 1-1/8" (Hs, Sae 8), Cap Screw; 3/8" X 1-1/8" Low, Cap Screw; 3/8" X 1-1/8" (Use W/ R111388, Appl), Cap Screw; 3/8" X 1-1/8" (Sae 8), Rear, Cap Screw; 3/8" X 1-1/8", (Use With R100676), Cap Screw; 3/8" X 1-1/8", Low, Cap Screw; 3/8" X 1-1/8" (5830), Cap Screw; (B) 3/8" X 1-1/8", Cap Screw; 3/8" X 1-1/8", (Code 3510), Cap Screw; (A: Power Shift Transmission) 3/8" X 1-1/8" (Hs, Sae 8), Cap Screw; 3/8" X 1-1/8" ( Hs, Sae 8) (Sub For 19h1139), Cap Screw; 3/8" X 1-1/8", Up, Cap Screw; 3/8" X 1-1/8" (Hs, Sae 8) (Sub For Et12277), Cap Screw; 3/8" X 1-1/8" 3/8" X 1-1/8", Cap Screw; 3/8" X 1-1/8", (Hg-G, Gh-01), Cap Screw; 3/8" X 1-1/8" (Use With R122195), Cap Screw; 3/8" X 1-1/8", (Sae 8), Cap Screw; 3/8" X 1-1/8" (Use With R111388), Cap Screw; 3/8" X 1-1/8" (Use With 12h304 And 14h812), Cap Screw; (A: With Intelliguard) 3/8" X 1-1/8", Cap Screw; 3/8" X 1-1/8" (Hs, Sae 8) (Inner Holes), Cap Screw; 3/8" X 1-1/8", (Code 7001, 7002, 7003, And 7004), Cap Screw; 3/8" X 1-1/8" (Hs, Sae 8) (Upper Holes), Cap Screw; 3/8" X 1-1/8", Cap Screw; 9.525 X 28.575 mm, Service Hardware For Motor Shaft, Cap Screw; 3/8" X 1-1/8", Cap Screw; 9.525 X 28.575 mm (3/8" X 1-1/8"), Cap Screw; 3/8" X 1-1/8" (Sub For 19h1139), Cap Screw; 3/8" X 1-1/8", (Use With R111388), Cap Screw; 3/8" X 1-1/8" (Sub 19h3411, This Application), Cap Screw; 9.525 X 28.575 mm, (Use With R100676), Cap Screw; 3/8" X 1-1/8" Hs Sae 8, Cap Screw; 3/8" X 1-1/8", (Use With R128602), Cap Screw; 3/8" X 1-1/8" (Use W/R111388, Appl), Cap Screw; 3/8" X 1-1/8" (Use With 14h812), Cap Screw; 3/8" X 1-1/8", (Sae8), Low, Cap Screw; 3/8" X 1-1/8" (Use With Re502573)	1
19***93	Screw; 1/2" X 2-1/4", Screw; 1/2" X 2-1/4" Tighten To 163 Nm, Screw; 3/8"X1-1/8", Screw; 1/2" X 2-1/4", (Use With Ae46336), Screw; 1/2" X 2-1/4", Hs, Sae 8, (Use Without E62662)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Fan Drive

11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	1
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***33	Cap Screw; (A: Note; 9550 (70*01- ) 9550sh (7001- )) 5/8" X 1-1/4", Cap Screw; (B) 5/8" X 1-1/4", Cap Screw; (V) 5/8" X 1-1/4", 1/2" Arm, Cap Screw; 5/8" X 1-1/4" (Use With Ar50519), Cap Screw; (A) 5/8"X1-1/4" \|, Cap Screw; (D) 5/8" X 1-1/4", Cap Screw; 5/8"X1 1/4", Cap Screw, Cap Screw; (A) 5/8"X1-1/4", Cap Screw; 6/8"X1-1/4", Cap Screw; For Right Side Of Stem, Cap Screw; (B) 5/8"X1-1/4", Cap Screw; (A), Cap Screw; 5/8" X 1-1/4", (Non-Greasable Spindle), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 5/8" X 1-1/4", Cap Screw; 5/8" X 1-1/4", Replaces 19h1815 Bolt, Cap Screw; (A: For Outside Mounting Of Tool Box) 5/8" X 1-1/4", Cap Screw; 5/8" X 1-1/4" Top Two Mounting Holes, Bolt, Cap Screw; 15.875 X 31.750 mm (5/8" X 1-1/4"), Cap Screw; (A: ( -Xxxxxx) 7710-0076; 7810-00*08) 5/8" X 1-1/4", Cap Screw; 5/8" X 1-1/4", Cap Screw; 5/8" X 1 1/4", Cap Screw; 5/8" X 1-1/4" (Non-Greasable Spindle), Cap Screw; (A) 5/8" X 1-1/4", Cap Screw; 5/8"X1-1/4", Cap Screw; 5/8" X 1-1/4" Without Strap, Cap Screw; 5/8" X 1-1/4", Cap Screw; (A) (B) (C) 5/8" X 1-1/4", Cap Screw; (B), Cap Screw; (Ou)5/8"X1-1/4", Cap Screw; 5/8"	6

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Knife Sharpener Mounting

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	2
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	17
03***75	Bolt; 3/8" X 5/8", Bolt; (A) 3/8"X5/8", Bolt; 3/8"X5/8" (Sub For 03h1681), Bolt; 3/8"X5/8" (For Al19810, Al19809), Bolt; 3/8" X 5/8" Rh, Bolt; 3/8" X 5/8" L.H., Bolt; 3/8" X 5/8", L.H., Bolt; 3/8"X5/8" Lw=900, Bolt; (B) 3/8"X5/8" (Sub For 03h1681), Bolt; 3/8"X5/8",Lh, Bolt; (Sub For 03h1680), Bolt; 3/8" X 5/8", R.H., Bolt; 3/8" X 5/8" (Rh), Bolt; 3/8" X 5/8" Lh, Bolt; 3/8" X 5/8", For Lw= 900, Bolt; 3/8"X5/8", Bolt; 3/8" X 5/8", Lh, Bolt; 3/8"X5/8", Lh, Bolt; Lh, Bolt, Bolt; (A) 3/8"X5/8" (Sub For 03h1680), Bolt; 3/8" X 5/8", (6 Used For 680), Bolt; 3/8"X5/8" (Sub For 03h1680), Bolt; (C) 3/8"X5/8"	3
14***18	Nut; 5/8" Slotted, R.H., Nut; No. 0.210 (For Al34934), Nut; 5/8" Unf Slotted, Nut; 5/8", Unf, Slotted, Nut; R.H., Nut; 5/8" Slotted, Nut; 5/8", Slotted, Unf, Nut; 5/8", Slotted, Nut, Nut; 5/8" R.H., Nut; (K) 5/8", Nut; 5/8", Sp, Nut; No. 0.210 (For At19808), Nut; 5/8", Slotted, Unf, Titn To 244 N.M. Minimum, Nut; 5/8" (For At19808), Nut; 5/8", Unf Slotted, Nut; 5/8" 5/8" Unf Slotted, Nut; 5/8" Unf, (Fixed And Adjustable Rear Axle), Nut; (312), Nut; 5/8", Slotted, R.H., Nut; 5/8" (For At19807), Nut; 5/8" 5/8", Nut; No. 0.210, Nut; 5/8", Nut; 5/8", L.H., Nut; 5/8", (Fixed And Adjustable Rear Axle), Nut; 5/8", R.H., Nut; 5/8" (For Al34934), Nut; 5/8" (B), Nut; 5/8", Unf	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Knife Sharpener Stone Carrier

19***26	Cap Screw; 3/8" X 2-1/4" (Round Shaft), Cap Screw; 3/8" X 2-1/4", (6211), Cap Screw; 3/8" X 2-1/4", For 5 Section, Cap Screw; 3/8" X 2-1/4", (Ea-D, De-01), Cap Screw; 3/8" X 2-1/4", (120 Used L.H.) (120 Used R.H.), Cap Screw; 3/8" X 2-1/4", (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8"X2-1/4", For 3179dl004, Cap Screw; 3/8" X 2-1/4" Low, Cap Screw; 3/8" X 2-1/4", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G), Cap Screw; (A) Roosa Master Dp,3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.9 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4, Cap Screw; (D) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" (Sub For 19h1164), Cap Screw; 3/8"X2-1/4", For 3179dl001, Cap Screw; 3/8" X 2-1/4", (Na-6, Gn-01), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.8 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8"X2-1/4", For 3179dl016, Cap Screw; 3/8" X 2-1/4", For 7 Section, Cap Screw; 3/8" X 2-1/4", (Gh-01), Cap Screw; (A: ( -Xxxxxx) 4250-00*71; 4450-0105) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (4219 Dn-02), Cap Screw; 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", W/ 24m7106, Cap Screw; 3/8" X 2-1/4", Code 6201, Cap Screw; 3/8"X2-1/4" (Sub For 19h255), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sae 8), Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (10 Used, 1217; 13 Used, 1219) Each Additional Tooth Bar, Cap Screw; 3/8" X 2-1/4", (Ha-G), Cap Screw; 3/8" X 2-1/4", (2514,9701), Cap Screw; 3/8" X 2-1/4", (Use With Single Selective Control), Cap Screw; 3/8" X 2-1/4" (Sae 8), Cap Screw; 3/8" X 2-1/4", (Code 6202), Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4" (Qrt), Cap Screw; 3/8"X2-1/4", For 3179dl013, Cap Screw; 3/8" X 2-1/4", (Use With R50415), Cap Screw; 3/8" X 2-1/4", (Ea-6), Cap Screw; 3/8 X 2-1/4", Cap Screw; 3/8" X 2-1/4", (2514,9138), Cap Screw; 3/8" X 2-1/4", (Use With Re19944), Cap Screw; (A) (B) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sub For 19h1164), Cap Screw; 3/8" X 2-1/4" (A), Cap Screw; 3/8" X 2-1/4", (Sub For 19h1819, This Application), Cap Screw; (B) 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4" (For Ar97712), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4", (To Bolt Bracket To Cab), Cap Screw; (A) 3/8"X2-1/4" \|, Cap Screw; 3/8" X 2-1/4", (9138), Cap Screw; (B) 3/8" X 2-1/4", Cap Screw; (A) 3/8" X 2-1/4", Cap Screw; (B: Power Shift Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (Na-D, Dn-01), Cap Screw; 3/8"X2"-1/4", Cap Screw; 3/8" X 2-1/4" (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8" X 2-1/4", Hs, Sae 8, 3/8" X 2-3/8" (Code 2111), Cap Screw; 3/8" X 2-1/4" (Upper), Cap Screw; 3/8" X 2-1/4", (40 Used,1217;65 Used,1219), Cap Screw; 3/8" X 2-1/2" (Sub For 19h1733), Cap Screw; 3/8" X 2-1/4", (Upper), Cap Screw; 3/8" X 2-1/4", For 503b And 506b, Cap Screw; 3/8" X 2-1/4" (To Bolt Bracket To Cab), Cap Screw; 3/8" X 2-1/4" (Sub For H86656), Cap Screw; 3/8" X 2-1/4" L.H., Cap Screw; 3/8" X 2-1/4", (Rc, Ru, Rus), Cap Screw; 3/8" X 2-1/4" Front, Cap Screw; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Less Cab), Cap Screw; 3/8" X 2-1/4", (Ha-D, Hb-D), Cap Screw; 3/8" X 2-1/4" Sub For 19h1164, Cap Screw; 3/8" X 2-1/4", (18 Used Per Tooth Bar, 3.7 M (12-Ft.) (21 Used Per Tooth Bar, 4.3 M (14-Ft.), Cap Screw; 3/8" X 2-1/4" (Use With R50415), Cap Screw; (A) 3/8"X2-1/4", Cap Screw, Cap Screw; (D) 3/8" X 2-1/4", (17'-11" Through 26'-5"), Cap Screw; (For 24m7106), Cap Screw; 3/8" X 2-1/4" (Use With 12h304 And 14h812), Cap Screw; (A) 7.50-16 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Cap Screw; 3/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 9.525 X 57.150 mm, Cap Screw; 3/8"X2-1/4" (W/ At19509), Cap Screw; 3/8" X 2-1/4" (Use With 14h812), Cap Screw; 3/8"X2-1/4" (For At19509), Cap Screw; 3/8" X 2-1/4" (Dn-03, Nb-D), Cap Screw; 3/8" X 2-1/4", For 6 Section, Cap Screw; 3/8" X 2-1/4", (9140), Cap Screw; 3/8" X 2-1/4", No. 19 Hitch, Cap Screw; 3/8" X 2-1/4", (Diesel), Cap Screw; (A) 3/8"X2-1/4" (Marked L41202), Cap Screw; 3/8" X 2-1/4", L.H., Cap Screw; 3/8" X 2-1/4", (2513,9140), Cap Screw; (A: ( -Xxxxxx)4560-0027;4760-0050;4960-00**54) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/2"	1
19***05	Cap Screw; (A: - Xxxxxx 467( - 31*00) 567( - 3150) 467s( - 3100)) 5/16" X 1" (1000 Rpm), Cap Screw; 5/16" X 1", Cap Screw; 7.925 X 25.400 mm, Cap Screw; (For (4) 24h1243), Cap Screw; 5/16" X 1" Rh, Cap Screw; 5/16" X 1", (Use With P50677), Cap Screw; 5/16" X 1", Hs, Sae 8, Cap Screw; 5/16"X1", Cap Screw; 5/16" X 1" (Hs, Sae 8) (Sub For R132456), Cap Screw; 5/16" X 1", (Hs, Sae 8)(Gas), Cap Screw; (A: - Xxxxxx 457( - 3100) 557( - 3150) 457s( - 31*00)) 5/16" X 1" (1000 Rpm), Cap Screw; 5/16" X 1", (Sub For Ffsb114668), Cap Screw; 5/16" X 1" (Hs, Sae 8), Cap Screw, Cap Screw; 5/16" X 1", (Use With Alternator Shield), Cap Screw; 5/16" X 1" (Hs, Sae 8) (Sub For Aw24189), Cap Screw; 5/16" X 1", (With Alternator Shield), Cap Screw; 5/16" X 1", Included In Ae53225 Lower Paddle Auger Kit; See Kit On Auger, Cap Screw; (A), Cap Screw; 5/16" X 1", (Dh-03, Gh-01), Cap Screw; (A) 5/16" X 1", (1000 Rpm), Cap Screw; 5/16" X 1", (Motorola), Cap Screw; 7.925 X 25.400 mm (5/16" X 1"), Cap Screw; 5/16" X 1" (Sub For N167650, This Application), Cap Screw; 7.925 X 25.400 mm (5/16" X 1") (Hs, Sae 8)	8
19***34	Cap Screw; 3/8" X 3" (Use With 14h812), Cap Screw; 3/8" X 3", Cap Screw; (A) 3/8" X 3" (Hs, Sae 8), Cap Screw; 3/8" X 3" (Use With H108673), Cap Screw; 3/8" X 3", Full Thread, Cap Screw; 3/8" X 3", (Use With H108673), Cap Screw; 3/8"X1", Cap Screw; 3/8" X 3" Hs, Sae 8, 3/8" X 3"	1
24***41	Washer; X X 17/32" X 15/16" X .060", Washer; 17/32" X 15/16" X 0.060", (154"), Washer; 17/32" X 15/16" X 0.060", (If Required For Lever Operation), Washer; 17/32" X 15/16" X 0,060", Washer; (C) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16", Washer; (B: For 9650 (70*01- ) & 9750 (7001- )) 17/32" X 15/16" X 0.060", Washer; 17/32"X15/16"X0.06", Washer; 17/32"X15/16", Washer; (A: Use With Conversion From Niehoff To Motorola Alternator For 8450 Prior To Serial No. 0086) 17/32" X 15/16" X 0.060", Washer; (A: ( -Xxxxxx) 4650-0101; 4850-0073) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", (443, 444, 643 Corn Heads), Washer; 17/32" X 1" X .060", Washer; (E) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0,06", Washer; (E), Washer; (B) (C) 17/32" X 15/16" X 0.060", Washer; (A: Power Shift Transmission) 17/32" X 15/16" X 0.060", Washer; (A: ( -Xxxxxx) 4050-0060; 4250-0095; 4450-0171) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", Middle, Washer; 17/32" X 15/16" X 0.060" (1243), Washer, Washer; 17/32" X 15/16" X 0.060" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925-8 Used; 930-10 Used; And 930 Flex Arg-1 Used), Washer; (B) (C) (D) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Washer; 13.487 X 23.825 X 1.524 mm, Washer; 17/32" X 15/16" X 0.060" 17/32" X 15/16" X .060", Washer; (D), Washer; 17/32"X15/16"X.060", Washer; (A: Used In 5415 And 5715 Orchard Tractors) 17/32" X 15/16" X 0.060", Washer; 17/32"X15/16"X0.060", Washer; 17/32" X 15/16" X 0.060" (154"), Washer; (A: For 9650 ( -7000) & 9750 ( -7000)) 17/32" X 15/16" X 0.060", Washer; (D: (Xxxxxx- ) 7600-0027; 7700-0005; 7800-0004) 17/32" X 15/16" X 0.060", Washer; 060 X 17/32 X 15/16 Zn, Washer; (A) .060" X 17/32" X 15/16", Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 17/32" X 15/16" X 0.060", Washer; 0.060"X17/32"X15/16", Washer; 17/32" X 15/16" X 0.060" (A), Washer; (B) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", (3 Nominal), Washer; (A) 17/32" X 15/16" X 0.060", Washer; (A: Note; 9550 (7001- ) 9550sh (70**01- )) 17/32" X 15/16" X 0.060", Washer; .060" X 17/32" X 15/16" (Sub For 24h1864), Washer; 0.06" X 17/32" X 15/16", Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 17/32" X 15/16" X 0.060", Washer; X 17/32" X 15/16" X .060", Washer; (A) (B) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0,060" (Sub For 24h1786, Ap, Washer; 17/32" X 15/16" X .060", Washer; (A: Used In High Clearance Tractors Too) 17/32" X 15/16" X 0.060", Washer; (D) 17/32" X 15/16" X 0.060", Washer; 15/16"X17/32"X.060", Washer; (C) (D) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060" (A) (B), Washer; (Sub For Mg771710), Washer; 17/32" X 13/16" X 0.060"	3

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Lower Feed Roll Supports And Smooth Roll (With Intelliguard)

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	6
03***82	Bolt; 12.700 X 95.250 mm (1/2" X 3-3/4"), Bolt; 1/2" X 3-3/4", Bolt; 12.700 X 95.250 mm (1/2" X 3-3/4") (1253a)	2
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	4
19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Lower Feed Rolls (Less Intelliguard)

03***95	Bolt; 3/8"X1-1/2", Bolt; 3/8"X1-1/2" (Sub For 03h1468), Bolt; 3/8" X 1-1/2" (Use With H127801), Bolt; 3/8" X 1-1/2", (22 Used On 18', 26 Used On 21' And 25' And 30 Used On 30'), Bolt; 3/8" X 1-1/2", (16 Used On 15' And 18', 20 Used On 21' And 25', 24 Used On 30'), Bolt; 3/8" X 1-1/2" (L.H. End - 4 Used; R.H. End - 2 Used, 1st And 4th Holes), Bolt; 3/8" X 1-1/2" (Rh), Bolt; 9.525 X 38.100 mm (3/8" X 1-1/2"), Bolt; 3/8" X 1-1/2", (40-Foot Boom), Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2" (Rigid), Bolt; 3/8" X 1-1/2" (Bolted Sections), Bolt; 3/8" X 1-1/2", (6 Used For 660, 8 Used For 680), Bolt; 3/8" X 1-1/2" Repair Kit, Bolt; 3/8"X1-1/2" (Sub For 03h1468 Appl), Bolt; 3/8" X 1-1/2" Lh, Bolt; 3/8" X 1-1/2", (Variable Drive)	11
03***57	Bolt; 1/2"X3-1/2", Bolt; (A) 1/2" X 3-1/2", Bolt; 1/2" X 3-1/2", Bolt; 1/2" X 3-1/2" (1/2" X 4" Required With Feed Roll Pan), Bolt; 1/2" X 3-1/2" (Required With Feed Roll Pan)	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	5
19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Lower Front Feed Roll (With Intelliguard)

19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	1
19***69	Screw; 5/16" X 2-1/2", (Use With R134603), Screw; 5/16" X 2-1/2" (Sub For R104862), Screw; 5/16" X 2-1/2" (Use With R134602), Screw; 5/16" X 2-1/2", Screw, Screw; 5/16" X 2-1/2", (Use With R134602), Screw; 5/16" X 2-1/2", Screw; 7.925 X 63.500 mm, Screw; 5/16" X 2-1/2" (Use With R134603), Screw; 5/16" X 2-1/2", (Sub For R104862, This Application)	3
22***79	Set Screw; (A: Only For 2, 0 M Hiflow Pickup) 3/8" X 3/8", Set Screw; 0.375" X 0.375", Set Screw; 3/8" X 3/8", Socket, Set Screw; 3/8" X 3/8", Set Screw, Set Screw; 9.525 X 9.525 mm, Set Screw; 3/8"X3/8", Set Screw; (B: For Round Shaft) 3/8" X 3/8" (For Dc41518), Set Screw; (A: Only For 1.8 M Pickup) 3/8" X 3/8"	1
24***49	Washer; (A) 30 mm (Sub For 24m3533), Washer; 1-9/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X 0.060", With Iron-Gard, Washer; 1-9/32" X 1-11/16" X 0.060", Washer; 19/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X .060", Washer; 1-9/32" X 1-11/16" X 0.060" Without Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060" With Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060", (3 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", (2 Used Nominal, With Iron-Gard) (5 Used Nominal, Less Iron-Gard), Washer; (A: Option) 1-9/32" X 1-11/16" X 0.060", Washer; 1-9/32" X 1-11/16" X 0.060", (2 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", Without Iron-Gard, Washer	0

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Non-Cantilevered Auger And Drive

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	4
03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	6
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	27
03***80	Bolt; (A) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", Round Head, Bolt; 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", (Use With B31500), Bolt; (C) 5/8" X 2-1/2", Bolt; (B) (C) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", (Use With Aa34357), Bolt; (B) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2" (A)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Radius Arms

03***03	Bolt; 3/4" X 3-1/4", Bolt; 3"X3-1/4"	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	3
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Recutter Screen And Frame

03***93	Bolt; 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", Auxiliary Hydraulic System	2
14***26	Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"	4
19***60	Cap Screw; 1/2" X 3", (With Full Thread), Cap Screw; 1/2" X 3", (Sub For Mg87339), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2" X 3", Full Thread, Cap Screw; 1/2" X 3", (Use With Aa58404), Cap Screw; 1/2" X 3", Full Thread, In-Line Units, Cap Screw, Cap Screw; 1/2" X 3" (Diesel), Cap Screw; 1/2" X 3", With Full Thread	2
19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	4

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Stationary Knife

14***20	Nut; 3/4", Nut; 3/4", Slotted,Unf,L.H. Thread, Nut; 3/4" Rh Wheel Support, Nut; 3/4", Slotted, Unf, L.H. Thread, Nut; 3/4" )Lh, Nut; 3/4", Slotted, Unf, L.H. Thread, (Sub Ae44466, (2) E72810 And (8) 24h1254), Nut; 3/4", L.H. Thread, Unf	4
19***32	Cap Screw; (A: 2wd Non-Powered, Rear Axle) 3/8" X 2-3/4", Cap Screw; 3/8" X 2-3/4" Sae 8, Cap Screw; 3/8" X 2-3/4", (Sub For Na7233), Cap Screw; 3/8" X 2-3/4" Torque To 46 Lb-Ft (63 N-M), Cap Screw; 3/8" X 2-3/4" (Hs, Sae 8) (Sub For Mg88444), Cap Screw; 3/8"X2-3/4", Cap Screw; 3/8" X 2-3/4" (Sub For 19h1944), Cap Screw; 3/8" X 2-3/4", Cap Screw; 3/8" X 2-3/4" ( Am54510 Nla) Please See And Authorized Echo Dealer For Parts, Cap Screw; 9.525 X 69.850 mm, Torque To 46 Lb-Ft (63 N-M), Cap Screw, Cap Screw; (A: (Adjustable Rear Axle) Non-Powered Rear Wheels) 3/8" X 2-3/4", Cap Screw; (B) 3/8" X 2-3/4" (Hs, Sae 8), Cap Screw; 3/8" X 2-3/4", (Sub For 19h1944, Appl), Cap Screw; 3/8" X 2-3/4" (Hs, Sae 8) (Sub For Mg87936 Or Mg88444), Cap Screw; 3/8" X 2-3/4", (Sae 8), Cap Screw; 3/8" X 2-3/4", Code 6212, Cap Screw; 3/8" X 2-3/4" (Hs, Sae 8), Cap Screw; 3/8" X 2-3/4" (Ev), Cap Screw; 3/8" X 2-3/4" (Sub For 19h1944, Appl), Cap Screw; 3/8" X 2-3/4", Cap Screw; 3/8" X 2-3/4" (Use With Re63295), Cap Screw; 9.525 X 69.850 mm, Cap Screw; 3/8" X 2-3/4", (Sae 8) , Up, Cap Screw; 3/8" X 2-3/4", (Use With Ah18661), Cap Screw; 3/8" X 2-3/4" (Hs, Sae 8) Rear, Cap Screw; 3/8" X 2-3/4" (Sae 8), Cap Screw; 3/8" X 2-3/4", (Use With 135 Amp), Cap Screw; 3/8" X 2-3/4", (Sub For 19h1944, This Application), Cap Screw; (A) 3/8" X 2-3/4", Cap Screw; 3/8" X 2-3/4" 3/8"X2-3/4" (Sae 8), Cap Screw; 3/8" X 2-3/4", (Use With Re63295)	2
19***93	Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69*00) 9550sh (-69*00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine	4
19***53	Cap Screw; 5/8" X 5", Hs Sae 8 (4 Used On 24, 26 And 28 Ft. Drills) (8 Used On 32 Ft. Drill), Cap Screw; 5/8" X 5" 36' And 44', Cap Screw; 5/8" X 5", Hs, Sae 8,, Cap Screw; 5/8" X 5" (Sae 8, For R115576), Cap Screw; 5/8" X 5" 5/8" X 5", Cap Screw; 5/8" X 5", Hs Sae 8, Cap Screw; 5/8" X 5" (Hs, Sae 8), Cap Screw; 5/8" X 5", Cap Screw; 5/8" X 5" (Sae 8), Cap Screw; 15.875 X 127 mm (5/8" X 5"), Cap Screw; 5/8" X 5", Hs, Sae 8, Cap Screw; 5/8" X 5" Hs, Sae 8, Cap Screw; 5/8" X 5" (Hs, Sae 8) (For 10 M (32'8") Machine), Cap Screw; 5/8" X 5" (Sae 8), For R115576, Cap Screw; 5/8" X 5" (14 Used Less Rockshaft) (10 Used Rockshaft), Cap Screw; 5/8" X 5" Hs Sae 8, Cap Screw; 5/8" X 5" (Sae 8) (For R115576), Cap Screw; 5/8" X 5" 36'	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Cutterhead And Feedrolls : Upper Feed Rolls

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	52
11***12	Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm	8
24***74	Washer; (B) 1-5/32" X 1-1/2" X 0.060", Washer; 1-5/32" X 1-1/2" X 0.060"	0
24***76	Shim; 0.025", (4 Used, 327) (6 Used, 337), Shim; X 1-3/4" X 1-5/32" X .024, Shim; 1-5/32"X1-3/4"X.024", Shim; 0.025", Shim; 1-5/32" X 1-3/4" X 0,024", Shim; 1-5/32"X1-3/4"X.036", Shim; 1-5/32" X 1-3/4" X 0.024", Shim; Washer, 1-5/32" X 1-3/4" X .024", Shim; 1-5/32" X 1-3/4" X 0.024", (2 Maximum), Shim; 0.025", (2 Maximum), Shim; 15/32" X 1-3/4" X .036", Shim; 1-5/32" X 1-3/4" X .024", Shim, Shim; 1-5/32" X 1-3/4" X .024" Washer, Shim; 0.025", (Sub For N167048), Shim; X 1-5/32" X 1-3/4" X .024", Shim; 1/5/32" X 1-3/4" X .024", Shim; 1-5/32" X 1-3/4" X .036", Shim; 1-5/32" X 1-3/4" X .048", Shim; 1,156" X 1,75" X 0,025", Shim; 1,156" X 1,750" X 0,025", Shim; 29,36 X 44,45 X 0,635 mm, Shim; 1, 156" X 1, 75" X 0, 025", Shim; 1-5/32" X 1-3/4" X.024"	3

See all parts with full part numbers in Heavy Parts AI →

Electrical

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Console And Power Harness Brackets (6000, 7000 And 8000 Series Tractors)

03***83	Bolt; M8 X 16 M8 X 1.25 X 16, Bolt; M8 X 16 Spanish, Bolt; M8 X 16 M8, Bolt; M8 X 16 (38 Used, 435; 50 Used, 535), Bolt; M8 X 16 L.H., Bolt; (A: 9550 (69*01- ) 9550sh (9601- )) M8 X 16, Bolt; M8 X 16, (7000 Series With 1.07 M (3.5 Ft) Harness), Bolt; M8 X 16 (Includes Z24604), Bolt; (B: With Rotor-Type Pickup (1000 Rpm Drive)) M8 X 16, Bolt; M8 X 16 (38-4 Ft) (50-5 Ft), Bolt; M8 X 16, (Use With E91222 And Ae55203), Bolt; M8 X 16 (To Plug L.H. Twine Box Holes), Bolt; M8 X 16 Without/Windshield, Bolt; (A: Straddle Mount) M8 X 16 (Use With R186016), Bolt; M8 X 16 (2 Used On L.H. 435)(4 Used On 535), Bolt; M8 X 16 (Sub For 19m8163), Bolt; M8 X 16 M8x16, Bolt; (A: For 9650 (6901- ) & 9750 (6901- )) M8 X 16, Bolt; M8 X 16 Sub For 03m7390, Bolt; (A: Not With Pneumatic Brakes) M8 X 16, Bolt; (A: 9550 ( -6900) 9550sh ( -6900)) M8 X 16, Bolt; M8 X 16 60 Used 14'(4.3 M) & 16'(4.9 M), 75 Used 18' (5.5 M), Bolt; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M8 X 16 (38 Used 335; 50 Used 375), Bolt; M8, Bolt; M8 X 16, Bolt; (A: 9550 (6901- ) 9550sh (6901- )) M8 X 16, Bolt; (A: Only For North America And Japan) M8 X 16, Bolt; (B) M8 X 16 (For Dc55155), Bolt; M8x16, Bolt; M8 X 16, (2 Used, 430) (4 Used, 530), Bolt; M8 X 16 (Europe), Bolt; M8 X 16 (Square Neck), Bolt; M8 X 16 (913 - 2 Used; 915 - 4 Used; 918 - 6 Used; 920, 922, 925, 930 - 8 Used), Bolt; M8 X 16 (7000 Series With 1.07 M (3.5 Ft) Harness), Bolt; M8 X 16, M8 X 16, Bolt; M8 X 16 (Export), Bolt; M8 X 16 (38 Used-430;50 Used-530), Bolt; M8x10, Bolt; M8 X 16 (915-1 Used; 918, 920, 922 And 925- 2 Used; 930-4 Used), Bolt; (A: For Vineyard Tractor Version Only) M8 X 16, Bolt; M8 X 16 (Sub For 03m7188), Bolt; (A: Rn Version Only) M8 X 16, Bolt; M8 X 16 M8 X 16, Bolt; M8 X 1.25 X 16, Bolt; M8 X 16 (Nlr), Bolt; (B: Xxxxxx- 446(1364) 546(1320)) M8 X 16, Bolt, Bolt; M8 X 16 Front, Bolt; (A: -Xxxxxx (9550, -6900)(9550sh, -6900)) M8 X 16, Bolt; (B: Isolated Open Operator Station) (C: With Cab) M8 X 16 (Use With R180259), Bolt; (A: For 9650 ( -6900) & 9750 ( -6900)) M8 X 16, Bolt; (A: For (6901- ) & 9750 (6901- )) M8 X 16, Bolt; (B: For Silage Special Machine Only) M8 X 16, Bolt; (A: For 9650 ( -6900) & 9750 ( -6900)) M8 X 16, Bolt; (A: Used With Double Twine Arms Only) M8 X 16, Bolt; (A: Straddle Mount) M8 X 16 (Use With R176971 Or R186016), Bolt; (A: For Multicrop Machine Only) M8 X 16, Bolt; (A: 9550 ( -6900) 9550sh ( -6900)) M8 X 16, Bolt; M8 X 16 Throttle, Bolt; M8 X 16, Bolt; M8 X 16, Without/Windshield, Bolt; (A: 9550 ( -6900) 9550sh ( -6900)) M8 X 16, Bolt; M8 X 10, Bolt; M8 X 16 (2 Used On L.H. 335) (4 Used On 375), Bolt; (A: 9550 (6901- ) 9550sh (6901- )) M8 X 16, Bolt; (A: For 9650 ( -6967) & 9750 ( -69*57)) M8 X 16, Bolt; (A) (B) M8 X 16, Bolt; (A: Used With Optional Double Twine Arm.) M8 X 16, Bolt; M8 X 16 Rh, Bolt; M8 X 16 (A), Bolt; M8 X 16 Square Neck, Bolt; (A: Included In Ae48634) M8 X 16, Bolt; (A) M8 X 16, Bolt; M8 X 16, R.H. Side Only	2
03***45	Bolt; (A: 9550 ( -69*00) 9550sh ( -6900)) M8 X 55, Bolt, Bolt; M8 X 55, Bolt; M8 X 55 M8 X 55, Bolt; (A: 9550 (6901- ) 9550sh (69*01- )) M8 X 55, Bolt; M8 X 55 (Rd. Head), Bolt; M8x55, Bolt; M8 X 55 1/4in.	2
11***12	Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm	1
14***96	Part Missing In Wise; M10 M10 X 1.5, Part Missing In Wise; M10 (10.9), Part Missing In Wise; (A: Only For 2, 0 M Rotoflow Or Maxicut Pickup) M10, Part Missing In Wise; M10 (C), Part Missing In Wise; M10, (653a, 654a And 853a), Part Missing In Wise; M10, (Use With Re275508), Part Missing In Wise; (A: 9550 (70*25-) 9550sh (7001-)) M10, Part Missing In Wise; (A: Starting From Series Number 625 (0644-), 630 (0634-)) M10, Part Missing In Wise; M10 (Use With Holddown Clips), Part Missing In Wise; (A) (E) M10, Part Missing In Wise; (A: For 25 Knives Only) M10, Part Missing In Wise; (C: Dubuque (To) Esn -8937) (D: Saran (Cd) Esn -6947) (E: Torreon (Pe) Esn -1282) M10, Part Missing In Wise; (A: (95 Amp) 9550 (7001-) 9550sh (7001-)) M10, Part Missing In Wise; M10 (60), Part Missing In Wise; (A: With Net Coveredge) M10, Part Missing In Wise; M10 (A) (B), Part Missing In Wise; (A: Collarshift Transmission (5220) Sn 4211- (5320) Sn 4307-) M10, Part Missing In Wise; M10 (Use With Re198656), Part Missing In Wise; M10 60 Used. 14'(4.3 M) & 16'(4.9 M); 75 Used, 18'(5.5 M), Part Missing In Wise; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M10, Flange Nut; M10, Part Missing In Wise; M10 (Use With H174742 Or H166689), Part Missing In Wise; (A: For 9650 (7001-) & 9750 (7001-)) M10, Part Missing In Wise; M10 (Use With Al71216 Or Al71217), Part Missing In Wise; M10 M10 (10), Part Missing In Wise; (A: Collarshift Transmission (5420) Sn 4413- (5520) Sn 4504-) M10, Part Missing In Wise; (C: Dubuque (To) Esn 8938-) (D: Saran (Cd) Esn 6948-) (E: Torreon (Pe) Esn 1283-) M10, Part Missing In Wise; (A) (B) M10, Part Missing In Wise; M10 10, Part Missing In Wise; M10 (7000 Series With 1.07 M (3.5 Ft) Harness), Part Missing In Wise; (C: Dubuque (To) Esn 8938-) (D: Saran (Cd) Esn 6887-) (E: Torreon (Pe) Esn 1757-) M10, Part Missing In Wise; (Sub For 14m7418), Part Missing In Wise; (A: For Hillmaster Ii) M10, Part Missing In Wise; M10, Use H161892, Cut To Length, Part Missing In Wise; M10 (Use With Al166646), Part Missing In Wise; (A: For Greenstar Gs1300 Display Module) (B: For Greenstar Gs1800 Display Module) M10, Part Missing In Wise; M10 Lh And Rh, Part Missing In Wise; (A: Used In 5725hc Tractor Too) M10, Part Missing In Wise; M10 (Corn Conversion), Part Missing In Wise; M10 (467s Only), Part Missing In Wise; (A: 9550 (-6900) 9550sh (-6900)) M10, Part Missing In Wise; M10, (Opt 2300), Part Missing In Wise; (A: For Dual Speed Straw Chopper Drive) M10, Part Missing In Wise; M10, (466s Only), Part Missing In Wise; M10 (132", 6875-;154", 6810-), Part Missing In Wise; M10 (Fine Cut), Part Missing In Wise; (C: (5410) 3449- (5510) 3535-) M10, Part Missing In Wise; M10, (Used On 592a, 692a And 892a Also), Part Missing In Wise; (D: W/Autoload) M10, Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) M10, Part Missing In Wise; M10 (Lh And Rh), Part Missing In Wise; M10 (10.0), Flange Nut; M10, (Standard) (Domestic), Part Missing In Wise; M10, (To Oil Pan Stud), Part Missing In Wise; (A: For Flat Discharge Spout Only) M10, Part Missing In Wise; M10, (454a), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) M10, Part Missing In Wise; M10 60 Used. 14 (4.3 M) & 16 (4.9 M); 75 Used, 18 (5.5 M), Part Missing In Wise; (A: For 2, 00 And 2, 20 Meter Pick Up With Precutter And Maxicut) M10, Part Missing In Wise; (A: Heavy Duty) M10, Part Missing In Wise; M10, (3 To Go Between Each Deflector And Holder), Part Missing In Wise; M10 (Pin Bracket To Rear Draft Arms), Part Missing In Wise; M10, 235 Hp Only, Flange Nut; M10, (Sub For T102520), Part Missing In Wise; M10, (1) Used With 03m7193 And (3) Used With 03m7192, Part Missing In Wise; M10 Lh, Part Missing In Wise; M10 (918 Flex Euro), Flange Nut; M10 X 1.5 X 35, Part Missing In Wise; (C: 5625 (-0072), 5725 (-0013)) M10, Part Missing In Wise; M10 (D), Part Missing In Wise; (A) (F) M10, Part Missing In Wise; (B: Without Net Coveredge) M10, Part Missing In Wise; (A: For 9650 (6996-) & 9750 (6925-)) M10, Part Missing In Wise; M10 (Saran Cd), Part Missing In Wise; (C: Dubuque (T0) Esn -8937) (D: Saran (Cd) Esn -6947) (E: Torreon (Pe) Esn -1282) M10, Part Missing In Wise; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M10, Part Missing In Wise; M10 (Sub For Cc19370), Part Missing In Wise; (A: For Prodrive) M10, Part Missing In Wise; M10 (European), Part Missing In Wise; (A: With Cab/Isolated Open Operated Station) M10, Flange Nut; M10, (Use With 95 Amp), Part Missing In Wise; (C: 5303 (Xxxxxx- 0000), 5403 (Xxxxxx- 0032), 5503 (Xxxxxx- Xxxxxx)) M10, Part Missing In Wise; M10 3/8" X 1/2", Part Missing In Wise; M10 4" (630), Part Missing In Wise; M10 (18' - 5 Used; 20' - 8 Used), Part Missing In Wise; M10, (Sub For 14m7334), Part Missing In Wise; M10 (No Longer Required), Part Missing In Wise; (A: 9550 (6901-) 9550sh (6901-)) M10, Part Missing In Wise; M10 Sub For (4) R73639, And (4) 24m7096; Appl, Part Missing In Wise; M10 (Use With Kv23649), Part Missing In Wise; (A: For Commandcenter) M10, Part Missing In Wise; M10, M10, Part Missing In Wise; M10 (Flex), Part Missing In Wise; (C) (D) M10, Part Missing In Wise; (B: Without Sound Gard Body) M10 (2955), Part Missing In Wise; M10 ((2) Used On 315ch), Part Missing In Wise; M10 Used With 03m7193 And Used With 03m7192, Part Missing In Wise; (B: For Engine 4045hrw51) M10, Part Missing In Wise; (A: Collarshift Transmission (5420) Sn -4412 (5520) Sn -4503) M10, Part Missing In Wise; M10 (2300), Part Missing In Wise; M10 For 20', 22', 25' And 30', Part Missing In Wise; M10 (To Oil Pan Stud), Part Missing In Wise; (C: Dubuque (T0) Esn -8937) (D: Saran (Cd) Esn -6947) (E: Torreon (Pe) Esn -1282) M10, Part Missing In Wise; M10, (10.9), Part Missing In Wise; (B) M10 (2955), Part Missing In Wise; M10, (7000 Series With 1.07 M (3.5 Ft) Harness), Part Missing In Wise; (B: Straddle Mount) M10, Part Missing In Wise; M10 (3 To Go Between Each Deflector And Holder), Part Missing In Wise; (A: With Cab) (B: Isolated Open Operator Station) M10 (To Oil Pan Stud), Part Missing In Wise; (F) M10, Part Missing In Wise; M10, (Sub For Et11514), Part Missing In Wise; M10 On Rear Bearings Only, Part Missing In Wise; M10, L.H., Part Missing In Wise; (C) M10, Part Missing In Wise; M10, Part Missing In Wise; M10 (Use With Al71215), Part Missing In Wise; M10, (456s Only), Part Missing In Wise; M10 (913), Part Missing In Wise; (D) M10, Part Missing In Wise; (A: Cob Harvest Option) M10, Part Missing In Wise, Part Missing In Wise; M10 (Use With Re173973), Part Missing In Wise; M10 R.H. (930), Part Missing In Wise; (A: Also For Creeper Fi, Syncroplus\ Powerquad) M10, Part Missing In Wise; (A: For Hillmaster Only) M10, Part Missing In Wise; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) M10, Part Missing In Wise; M10x1.5, Part Missing In Wise; (B: Dubuque (T0) Esn -8937) (C: Saran (Cd) Esn -6886) (D: Torreon (Pe) Esn -1756) M10, Part Missing In Wise; (A: For (6901-) & 9750 (6901-)) M10, Part Missing In Wise; M10 (Use As Required For Balancing), Part Missing In Wise; (B: Dubuque (T0) Esn -8937) (C: Saran (Cd) Esn -6886) (D: Torreon (Pe) Esn -1756) M10, Part Missing In Wise; (B: For 9650 (7001-) & 9750 (7001-)) M10, Part Missing In Wise; (A: Note; 9550 (-7000) 9550sh (-7000)) M10, Part Missing In Wise; M10, (3 Used, 430; 4 Used, 530), Part Missing In Wise; (A: Used In Orchard Tractors Too) (B: Used In High Clearance Tractors Too) M10, Part Missing In Wise; M10 (F), Part Missing In Wise; M10 (918, 920 Rigid, 920 Rice, 922 Rigid, 922 Rice, 925 Rigid, 922 Rice, 930 Rigid And 930 Rice), Part Missing In Wise; M10 Used With (1) 03m7193 And Used With(3) 03m7192, Part Missing In Wise; (A: Dubuque (T0) Esn 9052-) (B: Saran (Cd) Esn 6957-) (C: Torreon (Pe) Esn 1675-) M10, Part Missing In Wise; 10mm, Part Missing In Wise; M10 M10, (10), Part Missing In Wise; (A: Dubuque (To) Esn -9051) (B: Saran (Cd) Esn -6956) (C: Torreon (Pe) Esn -1674) M10, Part Missing In Wise; M10 (Sub For Er022085 Appl), Flange Nut; M10, (Cooler Assembly To Side Plate), Part Missing In Wise; M10 (1293), Part Missing In Wise; (B: Xxxxxx- (9550, 6901-)(9550sh, 6901-)) M10, Part Missing In Wise; (A: -Xxxxxx (9550, -6900)(9550sh, -6900)) M10, Part Missing In Wise; (E: Rice And Corn) M10, Part Missing In Wise; (B: Hydraulic Center Link) M10, Part Missing In Wise; (A: On Bearing) M10, Part Missing In Wise; M10, (Use With R129701), Part Missing In Wise; M10, (Opt 3100), Part Missing In Wise; (A: 9650 (-6900) & 9750 (-6900)) M10, Part Missing In Wise; M10 (918 Rigid), Part Missing In Wise; (A: 9550 (7001-) 9550sh (7001-)) M10, Part Missing In Wise; M10 (18' - 8 Used; 20' - 16 Used, 930 Flex Arg - 2 Used), Part Missing In Wise; M10 Primary To Secondary Countershaft Drive, Part Missing In Wise; M10 (694) (Thru Unused Holes In Floor Sheets), Part Missing In Wise; (A) (B) (C) M10, (Sub For Mg274259), Part Missing In Wise; M10 Lh, Rh, Part Missing In Wise; (A: With Net Coveredge) (B: Without Net Coveredge) M10, Part Missing In Wise; M10, M10, (10), Part Missing In Wise; M10 (10), Part Missing In Wise; M10, (Use With At72622), Part Missing In Wise; (A: With Net Coveredge) (B: Without Net Coveredge) (C: Only For 2.0 M Rotoflow Or Maxicut Pickup) M10, Part Missing In Wise; (A: Dubuque (To) Esn 9052-) (B: Saran (Cd) Esn Cd 6957-) (C: Torreon (Pe) Esn 1675-) M10, Part Missing In Wise; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) M10, Part Missing In Wise; M10 14.275 X 25.400 mm, Part Missing In Wise; M10 (Use With Kv22940), Part Missing In Wise; M10, (12 Used On 466) (16 Used On 566), Part Missing In Wise; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M10, Part Missing In Wise; (A: Note; 9550 (7001-) 9550sh (7001-)) M10, Part Missing In Wise; M10 Top, Part Missing In Wise; (A: For Hillmaster Ii) (B: For Countries With High Ambient Temperatures) M10, Part Missing In Wise; (A: Windrower Option Only) M10, Part Missing In Wise; (A: Fuel Tank, 30 Gallon (113, 6 Liter) (Cab)) M10, Part Missing In Wise; M10 (8r Only), Part Missing In Wise; M10, (Use With Ah209784), Part Missing In Wise; (A: With Hydraulic Cab Suspension (Hcs)) M10, Part Missing In Wise; (A: 9550 (6901-) 9550sh (9601-)) M10, Part Missing In Wise; (A: With Cab) M10, Part Missing In Wise; M10 (494, 594, 693, 694, 894 And 1293), Part Missing In Wise; (B) M16, Part Missing In Wise; (C: Dubuque (T0) Esn -8937) (D: Saran (Cd) Esn -6947) (E: Torreon (Pe) Esn -1282) M10, Part Missing In Wise; (A: Powrreverser Transmission) M10, Part Missing In Wise; (D), Part Missing In Wise; M10 Sub For (4) R73639 And (4) 24m7096; Appl, Part Missing In Wise; (A: With Net Wrapping) M10, Part Missing In Wise; M10, (Diesel), Part Missing In Wise; (A: For 2, 20 Meter Pickup) M10, Part Missing In Wise; (A: For 9650 (-6967) & 9750 (-6957)) M10, Part Missing In Wise; (C: Dubuque (T0) Esn 8938-) (D: Saran (Cd) Esn 6887-) (E: Torreon (Pe) Esn 1757-) M10, Part Missing In Wise; (A: 9550 (6901-) 9550sh (6901-)) M10, Part Missing In Wise; M10, (Saran Cd), Part Missing In Wise; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 36 Ft Machines) M10, Part Missing In Wise; (G: Tractors With Sound-Gard Body) M10, Part Missing In Wise; (A: Dubuque (To) Esn -9051) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -1724) M10, Part Missing In Wise; M10, (B), Part Missing In Wise; M10 R.H. (918, 920, 922, 925, 930), Part Missing In Wise; M10 (930 Flex Arg), Part Missing In Wise; (A: For 9650 (-7000) & 9750 (-7000)) M10, Part Missing In Wise; (A: Without Exhaust Gas Recirculation) M10, Part Missing In Wise; (A: For 1, 81 Meter Pickup) M10, Part Missing In Wise; M10, (10), Part Missing In Wise; M10 (A), Part Missing In Wise; (C: Upto Sr.No.5103s-0152, 5203-0080.) M10, Part Missing In Wise; (A: For Hillmaster Only) (B: For Countries With High Ambient Temperatures) M10, Part Missing In Wise; (A: For 9650 (6968-) & 9750 (6958-)) M10, Part Missing In Wise; (A: 9550 (-7024) 9550sh (-7000)) M10, Part Missing In Wise; M10 (3 Used, 435; 4 Used, 535), Part Missing In Wise; M10 (All Others), Part Missing In Wise; M10, Less Greenstar, Part Missing In Wise; (C: Dubuque (T0) Esn 8938-) (D: Saran (Cd) Esn 6948-) (E: Torreon (Pe) Esn 1283-) M10, Part Missing In Wise; (A: Dubuque (To) Esn 9052-) (B: Saran (Cd) Esn 6957-) (C: Torreon (Pe) Esn 1675-) M10, Part Missing In Wise; (A: Dubuque (To) Esn 9022-) (B: Saran (Cd) Esn 6957-) (C: Torreon (Pe) Esn 1675-) M10, Flange Nut; (Use With 19m7789 And At222103), Part Missing In Wise; (A: For 14 Knives Only) M10, Part Missing In Wise; (A) M10, Part Missing In Wise; (E) M10, Part Missing In Wise; (B) M10, Part Missing In Wise; (A: Used With Optional Double Twine Arm.) M10, Part Missing In Wise; (A: Only For 2.0 M Rotoflow Or Maxicut Pickup) M10 M10, Part Missing In Wise; (A: Used In 5425hc Tractor Too) M10, Part Missing In Wise; M10 (B), Part Missing In Wise; M10 (Sub For 14m7418), Part Missing In Wise; (A: Use Only For Kernel Processor Quick Conversion) M10, Part Missing In Wise; M10 Wide Fine Cut Straight Blade, Part Missing In Wise; M10 (Engine Mounting), Part Missing In Wise; (A: With Raised Fuel Tank For Better Ground Clearance) (B: With Hydraulic Cab Suspension (Hcs)) M10, Part Missing In Wise; M10 European W/Cab, Part Missing In Wise; M10 (1092), Part Missing In Wise; M10 (12 Used On 466) (16 Used On 566), Part Missing In Wise; M10 M10, Part Missing In Wise; M10 (Not Used This Appl), Part Missing In Wise; 3/8" X 1/2", Part Missing In Wise; (C: (5210) 3222- (5310) 3392-) M10, Part Missing In Wise; (A: For 9650 (-6995) & 9750 (-6924)) M10, Part Missing In Wise; (A: With Cab/Isolated Open Operator Station) M10, Part Missing In Wise; M10 R.H., Part Missing In Wise; M10 (456s Only), Part Missing In Wise; (A: 5303 (0001-), 5403 (0033-), 5503 (Xxxxxx-)) M10, Part Missing In Wise; (A: Also For Super Narrow Version) M10, Part Missing In Wise; (For Dc206430), Part Missing In Wise; (C) M10, (To Oil Pan Stud), Part Missing In Wise; (A: 9550 (-6900) 9550sh (-6900)) M10, Part Missing In Wise; M10, (6000 Series Only) (Used With 2.29 M (7.5 Ft) Harness), Flange Nut; M10, Hs, Sae 8, 3/8" X 1", Part Missing In Wise; (B: Note; (Tbh Illustrated) (Tbt) -7105 (Tbh) -7178) M10, Part Missing In Wise; (B: Not Used W/ Rops) M10, Part Missing In Wise; (A: Collarshift Transmission (5220) Sn -4210 (5320) Sn -4306) M10, Part Missing In Wise; (A: Dubuque (To) Esn -9051) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -1724) M10, Part Missing In Wise; (A: For Usa Only) M10, Part Missing In Wise; M10 3 Used On 335, 4 Used On 375, Part Missing In Wise; M10 (6000 Series Only) (Used With 2.29 M (7.5 Ft) Harness), Part Missing In Wise; (A: With Net Coveredge) (B: Without Net Coveredge) (C: Only For 2, 0 M Rotoflow Or Maxicut Pickup) M10, Part Missing In Wise; (C: Dubuque (T0) Esn 8938-) (D: Saran (Cd) Esn 6948-) (E: Torreon (Pe) Esn 1283-) M10, Part Missing In Wise; M10, (Sub For 14m7334, This Application), Part Missing In Wise; M10 (Rigid), Part Missing In Wise; M10 (Sub For Er022085, Appl), Part Missing In Wise; (C: (5410) 3448- (5510) 3528-) M10 (To Oil Pan Stud), Part Missing In Wise; (A), Part Missing In Wise; M10 (Use With Al71216 Or Al159606), Part Missing In Wise; (A: Used In High Clearance Tractors Too) M10, Part Missing In Wise; M10 (Grain And Rice Only), Part Missing In Wise; M10, (Thru Unused Holes In Floor Sheets), Part Missing In Wise; M10 M10x90, Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) M10, Part Missing In Wise; M10 (Use With 19m8162), Part Missing In Wise; (A: Used In 5625 And 5725 Tractor) M10, Part Missing In Wise; (B: Red Light And Bracket Assembly) M10, Flange Nut, Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) M10, Part Missing In Wise; (B: Dubuque (To) Esn -8937) (C: Saran (Cd) Esn -6886) (D: Torreon (Pe) Esn -1756) M10, Part Missing In Wise; M10 On Bearing, Part Missing In Wise; M10, (694) (Thru Unused Holes In Floor Sheets), Part Missing In Wise; M10 (Use With H146006 Or H145943), Part Missing In Wise; M10 (594, 693, 694, 893, 1092, 1290, 1291, And 1293), Part Missing In Wise; (A: Included With Hitch) M10, Part Missing In Wise; (C: Dubuque (T0) Esn 8938-) (D: Saran (Cd) Esn 6887-) (E: Torreon (Pe) Esn 1757-) M10, Part Missing In Wise; M10 All Except 890, Part Missing In Wise; (A: Included In Ae48634) M10, Part Missing In Wise; M6, Part Missing In Wise; (A: 5303 (- 0013), 5403 (- 00*31).) M10	3

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Console Power Harness Without Intelliguard

14***26	Nut; 0.138" (Dual Blowers), Nut; 0.138", Nut; 0.138", Nut; 0.138" Incld In 16, Nut; 0.138" No.6, Nut; 0.138" (Use With Re30714), Nut; 0.138", (Use With 21h1156), Nut; 0.138", (Sub For Ty4153), Nut; (C) 0.138", Nut; 0.138" Seed Star, Nut; (A: For 9650 (69*01-) & 9750 (6901-)) 0.138", Nut; 0.138" (Single Blower), Nut; 0,138", Nut; No.6, Nut; (A: For 9650 (-6900) & 9750 (-6900)) 0.138", Nut, Nut; 0.138", (Ty1418), Nut; (A: For 9650 (-6900) & 9750 (-6900)) 0.138", Nut; (A: For 9650 (6901-) & 9750 (6901-)) 0.138", Nut; 0.138", (Sub For Mg88458), Nut; 0.138", (With Rectangular Hourmeter) (No Longer Illustrated), Nut; 0.138" (C), Nut; No. 6, Nut; 0.138", (Sub For 81**63), Nut; 0.138" Located Inside Console, Nut; 0.138" Seedstar	1
21***90	Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 0.138" X 1/2", Part Missing In Wise; 0.138" X 1/2", Part Missing In Wise, Part Missing In Wise; 0.138" X 1/2" 15 In., Part Missing In Wise; 3.505 X 12.700 mm (0.138" X 1/2"), Part Missing In Wise; 0.138" X 1/2" Seedstar, Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 0.138" X 1/2", Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 0.138" X 1/2", Part Missing In Wise; No.6 X 1/2", Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-69*00)) 0.138" X 1/2", Screw; 0.138" X 1/2", (Ffsb103223 No Longer Available), Part Missing In Wise; 0.138" X 1/2" Seed Star, Screw; 0.138" X 1/2", (Machine) (No Longer Illustrated) (With Rectangular Hourmeter), Part Missing In Wise; 0.138" X 1/2" With Intelliguard, Unlit, Wagon Disconnect, Part Missing In Wise; No. 6 X 1/2"	1
AE***32	Cap; Dust Cap, Cap, Cap; (Also Order (2) R44302), Cap; (A), Cap; (A) 4 Nominal, 5 Maximum, Unlit, Cap; (C: For Vti Cab Harness) (Packg 1), Cap; 4epm, Cap; (B: For Vti Cab Wiring Harness) (Packg 1), Cap; (Packg 1), Cap; (B: For Cab Wiring Harness) (Packg 1)	1
AE***05	Wiring Harness; (A) Slip Clutch Alert	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Console Power Harnesses With Intelliguard

14***26	Nut; 0.138" (Dual Blowers), Nut; 0.138", Nut; 0.138", Nut; 0.138" Incld In 16, Nut; 0.138" No.6, Nut; 0.138" (Use With Re30714), Nut; 0.138", (Use With 21h1156), Nut; 0.138", (Sub For Ty4153), Nut; (C) 0.138", Nut; 0.138" Seed Star, Nut; (A: For 9650 (69*01-) & 9750 (6901-)) 0.138", Nut; 0.138" (Single Blower), Nut; 0,138", Nut; No.6, Nut; (A: For 9650 (-6900) & 9750 (-6900)) 0.138", Nut, Nut; 0.138", (Ty1418), Nut; (A: For 9650 (-6900) & 9750 (-6900)) 0.138", Nut; (A: For 9650 (6901-) & 9750 (6901-)) 0.138", Nut; 0.138", (Sub For Mg88458), Nut; 0.138", (With Rectangular Hourmeter) (No Longer Illustrated), Nut; 0.138" (C), Nut; No. 6, Nut; 0.138", (Sub For 81**63), Nut; 0.138" Located Inside Console, Nut; 0.138" Seedstar	1
14***31	Nut; (A: 9901 With Temperature And Oil Pressure Gages) (B: 9902 For Enclosure Field) 0.190", Nut; 0.190", Square, Nut; 0.190" (Use With Am53945), Nut; 0.190", (Export), Nut; M6, Nut; N0.10, Nut; (A) No 10, Nut; (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" (Sender), Nut; 0.190", Unf, Nut; (A) 0.190" 0.19", Nut; (A) (B) 0.190", Unf (4 Used Per Module), Nut; (C) 0.190", Nut; 0.190", (Sub For N198083), Nut; (B) 0.190", Nut; 0.190" No. 10 Unf, Nut; 0.190", (English), Nut; (Sub Ar102763) (Also Order 12h295), Nut; 0.190", (2-On Circuit Breaker Terminals, 2-Hold Circuit Breaker To Panel, 1-Motor To Tab On Door), Nut; 0.190" No. 10 (8630, 8640), Nut; No. 10-32, Unf (4 Used Per Module), Nut; No. 10-24, (Sub For Ty4057), Nut; 0.190" (4650, 8430, 8450), Nut; No. 10-24, Nut; No. 10, Unf, Nut; (A) No. 10, Nut; 4.826 mm, Nut; No. 10-32, Unf, Nut; 0.190", Nut; 0.190" (Part Of Re15583), Nut; 4.826 mm (0.190") Unf, Nut; 0.190", (200 Per Package) (Sub For Mg87825), Nut; (A) No.10, Nut; N.10, Nut; (B) No.10, Nut; 0.190" (Sub For 14h778, This Application), Nut; 0.190" 5/16", Nut; 10-24, Nut; (B: With Cab) 0.190", Nut; 0.190", (10 Used Syncro-Range) (11 Used Power Shift), Nut; 0.190", No.10, Nut; 0.190", (Sub For Ty4057), Nut; Unf No 10, Nut; 4.826 mm (0.190") No. 10, Nut; 0.190", Unf (With Iron-Gard), Nut; Hex, 10-24, Nut; No 10, Nut; 0.190", Machine Screw, Nut; (A) 0.190", Unf, Nut; 0.190", (16 Used With Cab) (24 Used With Air Conditioning), Nut; 0.190", For Units And Auger Shaft, Nut; 0.190", (A), Nut; (B: Also Includes Sn:) 0.190", Nut; 0.190", (Use With Re41759) (3011, 3016), Nut; 0.190", (2 Used Gasoline And Lp Gas) (3 Used Diesel), Nut; 0.190", (Starter Motor Solenoid Terminal), Nut; 0.190", Germany, Nut; 0.190" (4640, 4650, 4840, 8430, 8450), Nut; No 10, Ar, Nut; 0,190", Nut, Nut; 0.190", 200 Per Package, Nut; 0.190", North America, Nut; 0.190" (Also Order 12m7060), Nut; 0.190" (19 W/ Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 4.826 mm (0.190"), Nut; (A) 0.190", Nut; 0.190", (2 Used Gasoline And Lp-Gas) (3 Used Diesel), Nut; 0.190" (20 W/Sgb) (17 W/O Sgb), Nut; No. 10, Nut; No.10, Nut; (A: If Equipped) 0.190", Nut; (A), Nut; (A) No. 10-32, Unf, Nut; 0.190", (Use With Code 7201), Nut; 0.190", Unf, (2) Furnished With Additional Function, Nut; (A) (B) 0.190", Nut; (A: 3201 Panel Gages Sp Cntrl) (B: 3202 Panel Gages Sp Cntrl) (C: 3208 Panel Gages Sp Cntrl) 0.190", Nut; 0.190", Lock, Nut; 0.190", Df, Tf, Af, Nut; 0.190", (Sub For Ar102763), Nut; 0.190", All Other European Countries, Nut, Nut; 0.190", Not Used This Application, Nut; 0.190" (For Ar56671), Nut; (A) (B) No. 10-32, Unf, Nut; 0.190" (4050), Nut; 4.826 mm (0.190") No. 10 (8630, 8640), Nut; (K) 0.190", Nut; 0.190" (A), Nut; (A) (B) (C) 0.190", Nut; 0.190", 200 Per Package, (Sub For Mg87825), Nut; 4.826 mm, Nut; 0.190", (Gasoline), Nut; 0.190" (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" 0.190", Nut; 0.190", No. 10, Nut; 0.190" (19 W/Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 0.190", (Use With Ar11109 Or Ar11116), Nut; (A: With Intelliguard) 0.190", Nut; 0.190" (Sub Ar102763) (Also Order 12h295), Nut; 0.190", Nut; 0.190", Not Applicable, Nut; 0.190" (Use With At100083 And At100084), Nut; (C: Sgb (53***01-)) 0.190", Nut; 0.190" (10-32 Unf), Nut; 0.190" (Use With Re207840)	2
21***90	Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 0.138" X 1/2", Part Missing In Wise; 0.138" X 1/2", Part Missing In Wise, Part Missing In Wise; 0.138" X 1/2" 15 In., Part Missing In Wise; 3.505 X 12.700 mm (0.138" X 1/2"), Part Missing In Wise; 0.138" X 1/2" Seedstar, Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 0.138" X 1/2", Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 0.138" X 1/2", Part Missing In Wise; No.6 X 1/2", Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-69*00)) 0.138" X 1/2", Screw; 0.138" X 1/2", (Ffsb103223 No Longer Available), Part Missing In Wise; 0.138" X 1/2" Seed Star, Screw; 0.138" X 1/2", (Machine) (No Longer Illustrated) (With Rectangular Hourmeter), Part Missing In Wise; 0.138" X 1/2" With Intelliguard, Unlit, Wagon Disconnect, Part Missing In Wise; No. 6 X 1/2"	1
57***41	Electrical Connector; (31 Way), Electrical Connector; 31 Way, Electrical Connector; (23-Way)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Console With Metal Detector

12***97	Part Missing In Wise; 1/4" (F), Part Missing In Wise; 1/4", (Export), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; (A: For 9650 ( -69*00) & 9750 ( -6900)) 1/4", Part Missing In Wise; 1/4" (Tractor S/N -C225019), Part Missing In Wise; (A: For 9650 (6901- ) & 9750 (6901- )) 1/4", Part Missing In Wise; 1/4" (Tractor S/N S245017-), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (Nlr), Part Missing In Wise; 1/4" (Tractor S/N S236761-), Part Missing In Wise; 1/4" (Tractor S/N C234698-), Part Missing In Wise; 6.350 mm (1/4"), Lock Washer; 1/4", Part Missing In Wise; 1/4" (Tractor S/N C225020-), Part Missing In Wise; 1/4" (Tractor S/N -C234697), Part Missing In Wise; (A: For 9650 ( -6900) & 9750 ( -6900)) 1/4", Part Missing In Wise; (D) 1/4", Part Missing In Wise; 1/4", (Less Germany, France And Italy), Part Missing In Wise; Internal-Tooth 1/4", Part Missing In Wise; (B), Part Missing In Wise; 1/4", (Sub For R31578), Part Missing In Wise; 6.350 mm, Part Missing In Wise; Internal-Tooth, 1/4", Lock Washer, Part Missing In Wise; (A) 1/4", Part Missing In Wise; 1/4", (Nla), Part Missing In Wise; (B: Use With Ar93448) 1/4", Part Missing In Wise; (D) 1/4", Internal Tooth, Part Missing In Wise; 1/4" (Sub For 12h356), Part Missing In Wise; 6.350 mm (1/4") Internal Tooth, Part Missing In Wise; Internal Tooth, 1/4", Part Missing In Wise; (Sub For U12172), Part Missing In Wise; (A: See Your Authorized Repair Station For Parts Not Listed) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; (D), Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4" (Tractor S/N -S245016), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; 1/4", Part Missing In Wise, Part Missing In Wise; (A: For 9650 (6901- ) & 9750 (69*01- )) 1/4", Part Missing In Wise; 1/4", Internal-Tooth, Part Missing In Wise; 1/4" Incld In 14, Part Missing In Wise; 1/4", Internal Tooth, Part Missing In Wise; 1/4", (Nlr), Part Missing In Wise; 1/4", (Or), Part Missing In Wise; 1/4", Sp, Part Missing In Wise; 1/4" (Tractor S/N -S236760), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448)	4
14***86	Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-0100; 4255-0100; 4455-0200) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-0030; 8760-0021; 8960-0036) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-7000) 9550sh (-7000)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-7000) & 9750sts (-70*00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"	4
19***27	Cap Screw; (A) 1/4" X 1/2", Cap Screw; 1/4" X 1/2", (Ru), Cap Screw; 1/4" X 1/2" (12a) (Sub N219889 Appl), Cap Screw; 6.350 X 12.700 mm (1/4" X 1/2"), Cap Screw; 1/4" X 1/2", Not Used With Double Attachment, Cap Screw; 1/4"X1/2", Cap Screw; 1/4" X 1/2", (Use With 12h302 And 14h786), Cap Screw; 1/4" X 1/2", (Sub For Mg280279), Cap Screw; 6.350 X 12.700 mm, Cap Screw; 1/4" X 1/2", Kit Ar69585 And Ar73922, Cap Screw; 1/4" X 1/2", (20 Used For 714, 714a; 26 Used For 716, 716a), Cap Screw; 1/4" X 1/2" (Use With 12h302), Cap Screw; (A: ( -Xxxxxx) 8570-00*55; 8770-0077: 8870-00**88) 1/4" X 1/2", Cap Screw; 1/4" X 1/2", With Power Rear Wheel Drive, Cap Screw; (B) 1/4"X1/2", Cap Screw; 1/4" X 1/2" (Use With 24h1287 And 14h786), Cap Screw; 1/4" X 1/2", 4-Wheel Drive Only, Cap Screw; 1/4" X 1/2" (Dip And Pour Elevator), Cap Screw; 1/4" X 1/2" 1/4" X 1/2" Socket Head, (Sub For (2) Mg280273), Cap Screw; (E) 1/4" X 1/2", Cap Screw; 1/4" X 1/2", (Less Germany, France And Italy), Cap Screw; 1/4" X 1/2" (Sub H89095, This Application), Cap Screw, Cap Screw; (B) 1/4" X 1/2", Cap Screw; 1/4" X 1/2", (Kits Ar69585 And Ar73922), Cap Screw; 1/4" X 1/2" (Used With Straw Chopper), Cap Screw; (C) 1/4" X 1/2", Cap Screw; 1/4" X 1/2" (High Strength), Cap Screw; (A) 1/4"X1/2", Cap Screw; 1/4" X 1/2", (Sub For Ar28756), Cap Screw; 1/4" X 1/2", (Dip And Pour Elevator), Cap Screw; X 1/4" X 2", Cap Screw; 1/4 X 1/2", Cap Screw; 1/4" X 1/2", Cap Screw; 1/4" X 1/2" (Use With 14h786), Cap Screw; 1/4" X 1/2" For Re502828, Cap Screw; 1/4" X 1/2", (Used With Code 1405), Cap Screw; 1/4" X 1/2", Cap Screw; 1/4" X 1/2" Incld In 6, Cap Screw; 1/4x1/2", Cap Screw; 1/4" X 1/2", (Use With Straw Chopper), Cap Screw; (D) 1/4" X 1/2", Cap Screw; 1/4"X2-1/2", Cap Screw; (C) 1/4"X1/2", Cap Screw; 1/4" X 1/2" (Use With Bp13712)	8
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Console Without Metal Detector

37***48	Screw; 1/4" X 5/8", Self-Tapping, Screw; 1/4" X 5/8", Screw; 1/4" X 5/8" (Sub For R52937), Screw; 1/4" X 5/8" (Use With N10217)	8
A3***95	Screw; 0.190" X 1", Self-Tapping, Support; - Front Axle & Radiator (Used Prior To Trac. Ser. No. 83***45) (Order 1-A39319 Support & 2-A38303 Bolts), Screw, Support; - Frt. Axle & Radiator (Replaces A35560), Screw; 0.190" X 1", Screw; Self-Tapping	2
A5***57	Base; (Sub Aa38377 And Aa38561) Counsole, Base, Base; (Sub For R67210)	1
AE***75	Switch; On/Off/On Momentary, Switch; (A) 4 Nominal, 7 Maximum, Unlit, Switch	5

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Deutsch Terminals And Connectors

57***41	Electrical Connector; (31 Way), Electrical Connector; 31 Way, Electrical Connector; (23-Way)	1
57***42	Elec. Connector Hous; (31 Way), Elec. Connector Hous; 31 Way, Elec. Connector Hous; (Use With Ae44976)	1
R7***65	Elec. Connector Term; (A) (F) (G), Elec. Connector Term; (A: Wire Gauge/Connector Width) -1mm² /2.7mm, Elec. Connector Terminal; (Not Illustrated), Elec. Connector Term; (A) (16,18 Ga. Wire), Elec. Connector Term; For Cem - Size 16 - 12 Used, Elec. Connector Term; (A: Cable Gauge Plug Width) 0.8-1mm² /1.5mm, Elec. Connector Term; (A: Wire Gauge / Connector Width) 0.8-1mm² /1.5, Elec. Connector Term; (D: 16 Ga. Wire) (E: 18 Ga. Wire), Elec. Connector Term; 16 Or 18 Ga (Pkg. Of 40) (Wire), Elec. Connector Term; (A) (C) (D) 0,8 – 1 mm² (Packg 45), Elec. Connector Term; (D) (E), Elec. Connector Term; (A: Wire Gauge / Connector Width) 0.8-1mm² /1.5mm, Elec. Connector Term; (F: 16 Ga. Wire) (G: 18 Ga. Wire), Elec. Connector Term; 16 Or 18 Ga. Wire, Elec. Connector Term; (B: For Isobus Wiring Harness) 0.8 - 1 mm² (Packg 45), Elec. Connector Term; 0,8 - 1 mm² (Packg 45), Elec. Connector Term; Id = 0,75 - 1,0 mm², Elec. Connector Term; (Pkg Of 40) (16 Or 18 Ga Wire), Elec. Connector Term; Id = 0,5 - 1 mm², Elec. Connector Term; 16 Or 18 Ga Wire, Elec. Connector Term; (A: For Wiring Harness Isobus) (C: For Wiring Harness Maxicut Pickup) (D: For Wiring Harness Rotoflow Pickup) 0,8 – 1 mm² (Packg 45), Elec. Connector Term; Id= 0.75 - 1.0 mm², Elec. Connector Term; (B: For 16 Or 18 Gage Wire), Elec. Connector Term; (A: Cable Gauge) 0.5 – 1 mm², Elec. Connector Term; (A) (F: 16 Ga. Wire) (G: 18 Ga. Wire), Elec. Connector Term; Id = 0.5 - 1 mm² (Packg 45), Elec. Connector Term; (Pkg. Of 40) (16 Or 18 Ga. Wire), Elec. Connector Term; (Pkg Of 40) (16 Or 18 Gauge Wire), Elec. Connector Term; (A: For Wiring Harness Isobus) (C: For Wrapping Position Table Sensor Wiring Harness) (D: For Bale Table Sensor Wiring Harness) 0,8 – 1 mm² (Packg 45), Elec. Connector Term; (For Dc201295), Elec. Connector Term; Size 16 1-0.8, Elec. Connector Term; (A) (Pkg. Of 40) (16 Or 18 Ga. Wire) (Less Iron-Gard Use 19, Iron-Gard Use 23), Elec. Connector Term; (F) (G), Elec. Connector Term; (E: 16 Or 18 Ga. Wire), Elec. Connector Term; (A: For Cable Guage) 0, 5-1 mm², Elec. Connector Term; (A: For Wiring Harness Isobus) (C) (D) 0,8 – 1 mm² (Packg 45), Elec. Connector Term; (A) (16 Or 18 Ga. Wire), Elec. Connector Term; (B: For Wiring Harness Maxicut Pickup) (C: For Wiring Harness Rotoflow Pickup) (E: For Wiring Harness Density Proportional Valve) 0,8 – 1 mm² (Packg 45), Elec. Connector Term; (A) (Pkg. Of 40) (16 Or 18 Ga. Wire), Elec. Connector Term; (A: For Cable Gauge) 0, 5-1 mm², Elec. Connector Term; 0.8 - 1 mm² (Packg 45), Elec. Connector Term; (F: 16 Ga. Wire) (G: 18 Ga. Wire) (A), Elec. Connector Term; Id = 0, 5 - 1 mm², Elec. Connector Term, Elec. Connector Term; (A: For Cable Gauge) 0, 5-1 Mm2, Elec. Connector Terminal; (Pkg Of 40) (16 Or 18 Ga Wire), Elec. Connector Term; (C: For Wiring Harness Baletrak Plus) (Packg 45)	1
R7***66	Elec. Connector Term; (B) 0,8 – 1 mm (Packg 1), Elec. Connector Term; (Pkg. Of 40) (16 Or 18 Ga. Wire), Elec. Connector Term; (F) (G), Elec. Connector Term; (16 Or 18 Ga. Wire) (Pkg. Of 40), Elec. Connector Term; (A) (16 Or 18 Ga. Wire), Elec. Connector Term; (A: Cable Gauge Plug Width) 0.8-1mm² / 1.5mm, Elec. Connector Term; (B: For Cab Wiring Harness) 0,8 – 1 mm (Packg 1), Elec. Connector Term; 16 Or 18 Ga (Pkg. Of 40) Wire, Elec. Connector Term; (A) (Pkg. Of 40) (16 Or 18 Ga. Wire) (Less Iron-Gard Use 19, Iron-Gard Use 23), Elec. Connector Term; (A: Pkg Of 40) (16 Or 18 Ga. Wire), Elec. Connector Term; (E: 16 Or 18 Ga. Wire), Elec. Connector Term; (16 Or 18 Ga.) (Pkg. Of 40), Elec. Connector Term; Size=16 1-0.8, Elec. Connector Term; (Includes Ar51481), Elec. Connector Terminal; (Pkg Of 40) (16 Or 18 Ga Wire), Elec. Connector Term; (A) (F) (G), Elec. Connector Term; (A: For 12 Or 14 Gage Wire), Elec. Connector Term; (A) (Pkg. Of 40) (16 Or 18 Ga. Wire), Elec. Connector Term, Elec. Connector Term; (F: 16 Ga. Wire) (G: 18 Ga. Wire) (A), Elec. Connector Term; (A: Cable Gauge Plug Width) 0.8-1mm² /1.5mm, Elec. Connector Term; 16 1-0.8, Elec. Connector Term; (A) (16 Or 18 Ga.Wire), Elec. Connector Term; (A: Cable Gauge Plug Width) 0.8-1 mm² /1.5 mm, Elec. Connector Term; (D) (E), Elec. Connector Term; (D: 16 Ga. Wire) (E: 18 Ga. Wire), Elec. Connector Term; Male, Elec. Connector Term; (F: 16 Ga. Wire) (G: 18 Ga. Wire), Elec. Connector Term; (A: Wire Gauge / Connector Width) 0.8-1mm² /1.5mm, Elec. Connector Term; (B: For Vti Cab Wiring Harness) 0,8 – 1 mm (Packg 1), Elec. Connector Term; 16 Or 18 Ga. Wire, Elec. Connector Term; (C: For Vti Cab Harness) 0.8 - 1 mm (Packg 1), Elec. Connector Term; (Packg 40), Elec. Connector Term; (A: Cable Gauge Plug Width) 0, 8-1mm2 /1, 5mm, Elec. Connector Term; Size=16 1-0, 8, Elec. Connector Term; (A) (F: 16 Ga. Wire) (G: 18 Ga. Wire), Elec. Connector Term; (Pkg Of 40) (16 Or 18 Gauge Wire), Elec. Connector Term; (A) (16,18 Ga. Wire), Elec. Connector Term; (Pkg Of 40) (16 Or 18 Ga Wire), Elec. Connector Term; 16 Or 18 Ga Wire, Elec. Connector Term; (For Dc203536)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Electric Harvesting Unit Height Control

19***25	Cap Screw; 3/8"X4-1/4", (For 3179dl001), Cap Screw; 3/8"X4-1/4", Cap Screw; (A) 3/8" X 4-1/4", Cap Screw; 3/8" X 4-1/4", (Code 2111), Cap Screw; 3/8" X 4-1/4", (Code 3904), Cap Screw; 3/8" X 4-1/4", (Ea-G, Ha-G, Hb-G, Ge-01, Gh-01), Cap Screw; 3/8" X 4-1/4", (Gasoline), Cap Screw; (A) 3/8" X 4-1/4", (4 Used Syncro-Range), Cap Screw; (B: Hi-Crop) (F: (-Xxxxxx) Tsn-00*09) 3/8" X 4-1/4", Cap Screw; 3/8" X 4-1/4", (Power Front Wheel Drive), Cap Screw; (A: Powrshift Transmission) (E: (-Xxxxxx) 4050-0043 (Qrt)) 3/8" X 4-1/4", Cap Screw; 9.525 X 107.950 mm (3/8" X 4-1/4"), Cap Screw; (B) 3/8" X 4-1/4", Cap Screw; 3/8" X 4-1/4" (Single-Function), Cap Screw, Cap Screw; 3/8" X 4-1/4", (Use With Power Front Wheel Drive), Cap Screw; 3/8" X 4-1/4" (Hi-Crop), Cap Screw; 3/8" X 4-1/4", Cap Screw; 3/8"X5", Cap Screw; (B: Hi-Crop) 3/8" X 4-1/4", Cap Screw; 3/8"X4-1/4", (For 3179dl016), Cap Screw; 3/8" X 4-1/4", (2 Used Power Shift) (4 Used Syncro-Range), Cap Screw; (A: Neutral Start Bracket) 3/8" X 4-1/4", Cap Screw; (A: (-Xxxxxx) 4050-00**43 (Qrt)) 3/8" X 4-1/4", Cap Screw; 3/8" X 4-1/4", (Hc-G), Cap Screw; 3/8" X 4-1/4", (Ea-6, Na-6, Ge-01, Gn-01)	1
19***99	Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2" (Sae 8) (Sub For 19h1847), Cap Screw; (A) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (Less Cab), Cap Screw; 5/8" X 2-1/2", (Sae 8), Cap Screw; 5/8" X 2-1/2", (Code 1404), Cap Screw; 5/8" X 2-1/2", (Code 1403), Cap Screw; 5/8" X 2-1/2" Sae 8, Cap Screw; 5/8" X 2-1/2", Upper Right, (Sub For 19h3244), Cap Screw; 5/8"X2-1/2"Unc, Cap Screw; (E: Code 1402 Flywheel Housing Sae No. 2) 5/8" X 2-1/2" Code 1403, Cap Screw, Cap Screw; Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (4 Used Without Step), Cap Screw; 5/8" X 2-1/2", (Sub 19h3244), Cap Screw; 5/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/2", (Sub For 19h1387) (1405), Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244), Cap Screw; 5/8" X 2-1/2" Rh., Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244, This Application), Cap Screw; 5/8" X 2-1/2" (A), Cap Screw; 5/8" X 2-1/2", Code 1407, Cap Screw; 5/8" X 2-1/2", Code 1406, Cap Screw; 5/8" X 2-1/2" (Sae 8), Cap Screw; 5/8"X2-1/2", Cap Screw; 5/8" X 2-1/2", Upper Right, Cap Screw; 5/8" X 2-1/2" Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; (A) (B) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Low	1
19***44	Cap Screw; 1/2" X 2-1/2" Hs, Sae 8, Cap Screw; 1/2" X 2-1/2", (Tube End), Cap Screw; 1/2" X 2-1/2", Hs Sae 8, Cap Screw; 1/2" X 2-1/2", (Use With H110290 Or H119210), Cap Screw; 1/2"X2-1/2", Cap Screw; (A: Power Shift Transmission) 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2", For 15'3" Harrow, Cap Screw; 1/2" X 2-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; 1/2"X2 1/2", Cap Screw; 1/2" X 2-1/2", Hs, Sae 8 (With Spout-Trak), Cap Screw; 12.700 X 63.500 mm, Cap Screw; 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2", Hs, Sae 8, Cap Screw; (B) (D) 1/2" X 2-1/2", Cap Screw; 1/2"X2-1/2", For 3179dl005, Cap Screw; 1/2"X2-1/2", For 3179dl001, Cap Screw; (A) 1/2"X2-1/2", Cap Screw; 1/2"X2"-1/2", Cap Screw; 1/2" X 2-1/2", (Sae 8), Cap Screw; 1/2" X 2-1/2" (Hs, Sae 8), Cap Screw; 1/2"X2-1/2", For 3179dl015, Cap Screw; 1/2" X 2-1/2", (Sub For T67810), Cap Screw; 1/2" X 2-1/2", L.H., Cap Screw; Hs, Sae 8, 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2", (Use With T20036), Cap Screw; 1/2" X 2-1/2" (Use With H110290 Or H119210), Cap Screw; 1/2"X2-1/2", For 3179dl014, Cap Screw; 1/2"X2-1/2", For 3179dl016, Cap Screw; 1/2" X 2-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 2-1/2" (With Spout-Trak), Cap Screw; (C) 1/2" X 2-1/2", Cap Screw; (A), Cap Screw, Cap Screw; 1/2" X 2-1/2" (Sub For Mg20987), Cap Screw; 1/2"X2-1/2", For 3179dl007, Cap Screw; (B) 1/2"X2-1/2", Cap Screw; (A) 1/2" X 2-1/2", Cap Screw; (D) 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2" (Sae 8), Cap Screw; 1/2" X 2-1/2" (44 Ft), Cap Screw; 1/2" X 2-1/2" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 2-1/2", R.H., Cap Screw; 1/2"X2-1/2" (For R109086), Cap Screw; (A) (C) 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2", For 10' And 12' Harrows	1
19***64	Cap Screw; 5/16" X 3/4", (Without Alternator Shield), Cap Screw; (A) 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (Less Spout-Trak), Cap Screw; 5/16" X 3/4" (United Kingdom Only), Cap Screw, Cap Screw; 5/16" X 3/4" (With Mechanical Front Wheel Drive), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (3.7 M (12-Ft.) Platform Less Conditioner), Cap Screw; 5/16" X 3/4" (Hs, Sae 8), Cap Screw; 5/16" X 3/4", Cap Screw; 5/16" X 3/4" (30"), Cap Screw; 5/16" X 3/4", (Use Without Alternator Shield), Cap Screw; 5/16" X 3/4" Hs, Sae 8, Cap Screw; 5/16" X 3/4", Hs, Sae 8, Cap Screw; 5/16"X3/4", Cap Screw; 5/16" X 3/4", (Sub 19h1900), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (Sub For 19h1112), Cap Screw; 5/16" X 3/4", (Hs, Sae 8), Cap Screw; (A: For Engine (Cd6068hz001)) 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (Sae 8), Cap Screw; (A) (B) 5/16" X 3/4", Cap Screw; 5/16" X 3/4" (4 Used, 30") (10 Used, 38"), Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Cap Screw; 5/16" X 3/4" (Nla), Cap Screw; 5/16" X 3/4" (Sub E33233), Cap Screw; 7.925 X 19.050 mm, Cap Screw; 5/16" X 3/4", (Code 2912), Cap Screw; 5/16" X 3/4" (16 Used, 30") (15 Used, 38"), Cap Screw; 5/16" X 3/4" (Less Spout-Trak), Cap Screw; 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (3-Rrc), Cap Screw; 5/16" X 3/4", (Use With R108741), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (Sub For Et10723), Cap Screw; (D) 5/16" X 3/4" (Hs, Sae 8), Cap Screw; 5/16" X 3/4" (Sae 8)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Electrical Connector Service Kit

H1***55	Connector; (A: 9550 (70*01-) 9550sh (7001-)) Alternator Field, Connector; Alternator Field, Connector, Connector; (A), Connector; (A: 9550 (6901-7000) 9550sh (6901-7000)) Alternator Field, Connector; (A: Note; 9550 (-6900) 9550sh (-6900)) Alternator Field, Connector; (Sub For Z40924), Connector; (A: For 9650 (6901-) & 9750 (6901-)) Alternator Field, Connector; 3-Way Lock, Female, Connector; (A: For 9650 (-6900) & 9750 (-69*00)) Alternator Field, Connector; Alternator Field Excite, Electrical Connector Assembly, Connector; Alternator, Connector; To Alternator Harness	0
M4***35	Terminal; (14-16 Ga.Wire), Terminal, Terminal; (Packg (3)), Terminal; (B), Terminal; Pkg 3, Terminal; (Pkg. Of 3), Terminal; Pkg. Of 3, Terminal; Windshield Washer Pump, Terminal; (Pkg (3)), Terminal; Packg 3, Terminal; (B: Pkg. Of 3), Terminal; Air Filter Switch, Terminal; Packg (3), Terminal; Console Light, Terminal; Packg Of 3, Electrical Connector Assembly; (B), Terminal; Starter, Terminal; Horn Switch, Terminal; Start Solenoid, Terminal; Package Of 3	0
R4***87	Electrical Connector; (Ord W/ (2) L36677, 57m7499), Electrical Connector, Electrical Connector; (A: 9550 (-69*00) 9550sh (-6900)) Dome Lamp Switch, Electrical Connector; Dome Light Switch, Electrical Connector; (Ord W/ (2) L36677, 57m7499), Electrical Connector; (A), Electrical Connector; Dome Lamp Switch, Electrical Connector; (Ord W/ (3) L36677), Electrical Connector; (A: For 9650 (-6900) & 9750 (-69*00)) Dome Lamp Switch, Electrical Connector Assembly, Electrical Connector; (Pkg Of 2) Dome Light Switch, Electrical Connector; 3 Contact, Lock (Male), Electrical Connector; 3-Way, Electrical Connector; Convenience Outlet	0
R6***95	Terminal; (10-12 Ga.) Packg Of 15, Terminal; Female, 10 Ga. (20 In A Pkg.), Terminal; (G) (Sub For N115096) Female (Pkg. Of 15), Terminal, Terminal; (B: 10 Or 12 Ga. Wire) Packg (15), Terminal; (A) (10 Ga. Wire), Terminal; (A: 10 Ga, Wire), Terminal; (B) 10 Ga., Terminal; (10-12 Ga.) (Pkg (15)), Terminal; (J) 10 Ga., Terminal; Pkg. Of 15 (10 Or 12 Ga. Wire), Terminal; (10 Or 12 Ga. Wire), Terminal; (A) (B: 10 Ga. Wire), Elec. Connector Terminal; Female, 10 Ga., Terminal; (B: 10 Or 12 Ga. Wire) (Pkg. Of 15), Terminal; 10 Or 12 Ga. Package Of 15 Wire, Terminal; (B: 10 Ga. Wire) (A), Terminal; (16 Or 18 Ga. Wire) (Pkg. Of 40) (Sub For R78065), Terminal; 10 Ga Female, Terminal; (A) (B), Terminal; (A), Terminal; 10 Ga., Terminal; Female, 10 Ga., Terminal; 10 Ga. Female, Terminal; (A: Pkg Of 40) (16 Or 18 Ga. Wire) (Sub For R78065), Terminal; (10-12 Ga.) (Packg (15)), Terminal; 10 Ga, Terminal; (B), Terminal; (A: 10 Ga. Wire), Terminal; Female, 10 Ga 20 In A Pkg, Terminal; (G: 10 Or 12 Ga. Wire) (Pkg. Of 15), Terminal; (10 Or 12 Ga.) Wire Pkg. Of 15, Terminal; 10 Or 12 Ga. Wire, Terminal; (G: 10 Or 12 Gauge Wire) (Pkg. Of 15), Terminal; (B: 10 Ga. Wire), Terminal; Packg Of 15 (10-12 Ga.), Terminal; (Sub For R78065) (Pkg. Of 40) (16 Or 18 Ga. Wire), Terminal; (A) (Sub For R78065) (16 Or 18 Ga. Wire), Terminal; (C: 10 Ga. Wire), Terminal; (C) 10 Ga., Terminal; (16 Or 18 Ga.) (Pkg. Of 40) (Sub For R78065), Terminal; Pkg. Of 15 (10 Or 12 Ga. Wire) (Sub For N115096), Terminal; 10 Or 12 Ga Wire, Terminal; (G) (Pkg. Of 15), Terminal; Female 10 Ga.	0

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Electrical Outlet Socket Plug

RE***44

Plug; Male, Plug; Convenience Outlet, Plug; (A: ( -Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) (Use With Al25073), Plug, Plug; Outlet, (Use With Ae49683), Plug; (A)

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Feed Roll Gear Case (With Intelliguard)

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	1
19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	1
AE***98	Bracket, Bracket; (With Iron-Gard)	1
AE***90	Elec. Connector Acce	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Main Wiring Harness (Less Intelliguard)

57***42	Elec. Connector Hous; (31 Way), Elec. Connector Hous; 31 Way, Elec. Connector Hous; (Use With Ae44976)	1
AE***76	Cap, Cap; (Also Order (2) R44302), Cap; (B: For Isobus Wiring Harness) (Packg 1), Cap; (Packg 1) Nla; Order A65671	1
AE***54	Wiring Harness	1
AT***99	Diode; (5amp), Diode, Left Clutch, Diode; (Sub For Ffsb108893), Alternator Diode, Lcl Diode, (5 Amp), Rcl Diode, 4epm, Alternator, Diode; Reverse Voltage Protection, Park Brake, And Engine Starter Coil Suppression, (Delco-Remy) (Alternator), Optional-Only Installed With Unloader Valve, Diode; (5 Amp), 5 Amp, Fold Switch 3 Diode, Right Clutch	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Main Wiring Harness (With Intelliguard)

57***42	Elec. Connector Hous; (31 Way), Elec. Connector Hous; 31 Way, Elec. Connector Hous; (Use With Ae44976)	1
AE***76	Cap, Cap; (Also Order (2) R44302), Cap; (B: For Isobus Wiring Harness) (Packg 1), Cap; (Packg 1) Nla; Order A65671	1
AE***31	Wiring Harness	1
AT***99	Diode; (5amp), Diode, Left Clutch, Diode; (Sub For Ffsb108893), Alternator Diode, Lcl Diode, (5 Amp), Rcl Diode, 4epm, Alternator, Diode; Reverse Voltage Protection, Park Brake, And Engine Starter Coil Suppression, (Delco-Remy) (Alternator), Optional-Only Installed With Unloader Valve, Diode; (5 Amp), 5 Amp, Fold Switch 3 Diode, Right Clutch	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Power Harness (Tractors With Soundgard And Comfortguard Other Than 55 Series)

14***31	Nut; (A: 9901 With Temperature And Oil Pressure Gages) (B: 9902 For Enclosure Field) 0.190", Nut; 0.190", Square, Nut; 0.190" (Use With Am53945), Nut; 0.190", (Export), Nut; M6, Nut; N0.10, Nut; (A) No 10, Nut; (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" (Sender), Nut; 0.190", Unf, Nut; (A) 0.190" 0.19", Nut; (A) (B) 0.190", Unf (4 Used Per Module), Nut; (C) 0.190", Nut; 0.190", (Sub For N198083), Nut; (B) 0.190", Nut; 0.190" No. 10 Unf, Nut; 0.190", (English), Nut; (Sub Ar102763) (Also Order 12h295), Nut; 0.190", (2-On Circuit Breaker Terminals, 2-Hold Circuit Breaker To Panel, 1-Motor To Tab On Door), Nut; 0.190" No. 10 (8630, 8640), Nut; No. 10-32, Unf (4 Used Per Module), Nut; No. 10-24, (Sub For Ty4057), Nut; 0.190" (4650, 8430, 8450), Nut; No. 10-24, Nut; No. 10, Unf, Nut; (A) No. 10, Nut; 4.826 mm, Nut; No. 10-32, Unf, Nut; 0.190", Nut; 0.190" (Part Of Re15583), Nut; 4.826 mm (0.190") Unf, Nut; 0.190", (200 Per Package) (Sub For Mg87825), Nut; (A) No.10, Nut; N.10, Nut; (B) No.10, Nut; 0.190" (Sub For 14h778, This Application), Nut; 0.190" 5/16", Nut; 10-24, Nut; (B: With Cab) 0.190", Nut; 0.190", (10 Used Syncro-Range) (11 Used Power Shift), Nut; 0.190", No.10, Nut; 0.190", (Sub For Ty4057), Nut; Unf No 10, Nut; 4.826 mm (0.190") No. 10, Nut; 0.190", Unf (With Iron-Gard), Nut; Hex, 10-24, Nut; No 10, Nut; 0.190", Machine Screw, Nut; (A) 0.190", Unf, Nut; 0.190", (16 Used With Cab) (24 Used With Air Conditioning), Nut; 0.190", For Units And Auger Shaft, Nut; 0.190", (A), Nut; (B: Also Includes Sn:) 0.190", Nut; 0.190", (Use With Re41759) (3011, 3016), Nut; 0.190", (2 Used Gasoline And Lp Gas) (3 Used Diesel), Nut; 0.190", (Starter Motor Solenoid Terminal), Nut; 0.190", Germany, Nut; 0.190" (4640, 4650, 4840, 8430, 8450), Nut; No 10, Ar, Nut; 0,190", Nut, Nut; 0.190", 200 Per Package, Nut; 0.190", North America, Nut; 0.190" (Also Order 12m7060), Nut; 0.190" (19 W/ Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 4.826 mm (0.190"), Nut; (A) 0.190", Nut; 0.190", (2 Used Gasoline And Lp-Gas) (3 Used Diesel), Nut; 0.190" (20 W/Sgb) (17 W/O Sgb), Nut; No. 10, Nut; No.10, Nut; (A: If Equipped) 0.190", Nut; (A), Nut; (A) No. 10-32, Unf, Nut; 0.190", (Use With Code 7201), Nut; 0.190", Unf, (2) Furnished With Additional Function, Nut; (A) (B) 0.190", Nut; (A: 3201 Panel Gages Sp Cntrl) (B: 3202 Panel Gages Sp Cntrl) (C: 3208 Panel Gages Sp Cntrl) 0.190", Nut; 0.190", Lock, Nut; 0.190", Df, Tf, Af, Nut; 0.190", (Sub For Ar102763), Nut; 0.190", All Other European Countries, Nut, Nut; 0.190", Not Used This Application, Nut; 0.190" (For Ar56671), Nut; (A) (B) No. 10-32, Unf, Nut; 0.190" (4050), Nut; 4.826 mm (0.190") No. 10 (8630, 8640), Nut; (K) 0.190", Nut; 0.190" (A), Nut; (A) (B) (C) 0.190", Nut; 0.190", 200 Per Package, (Sub For Mg87825), Nut; 4.826 mm, Nut; 0.190", (Gasoline), Nut; 0.190" (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" 0.190", Nut; 0.190", No. 10, Nut; 0.190" (19 W/Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 0.190", (Use With Ar11109 Or Ar11116), Nut; (A: With Intelliguard) 0.190", Nut; 0.190" (Sub Ar102763) (Also Order 12h295), Nut; 0.190", Nut; 0.190", Not Applicable, Nut; 0.190" (Use With At100083 And At100084), Nut; (C: Sgb (53***01-)) 0.190", Nut; 0.190" (10-32 Unf), Nut; 0.190" (Use With Re207840)	4
AE***00	Wiring Harness; (Sub For Ae43486) Convenience Outlet - 2 Terminal Female Socket (Monitor Box From Tractor), Wiring Harness; Monitor Box From Tractor, Wiring Harness, Wiring Harness; (Power To Console Harness) Tractors Without Convenience Outlet Includes Keys 11-2, 20, 24, 25, 26 & 28-1, Wiring Harness; (Sub For Ae43486), Wiring Harness; Convenience Outlet - 2 Terminal Female Socket, (Sub For Ae43486), Wiring Harness; (Includes Keys 3, 4, 5, 7, 8, 9) All Deere Tractors Prior To 50 Series, Wiring Harness; 2-Terminal, Wiring Harness; Convenience Outlet - 2 Terminal Female Socket (Sub For Ae43486), Wiring Harness; Monitor Box From Tractor, (Sub For Ae43486)	1
AL***73	Socket Outlet; (A: ( -Xxxxxx) 8560-00*30; 8760-0021; 8960-0036), Socket Outlet; (C: Convenience Electrical Outlet Socket), Socket Outlet; (B: ( -Xxxxxx) 8560-0030; 8760-0021; 8960-00*36) Accessory, Socket Outlet; (Ord W/ (2) 57m7041), Socket Outlet; (A: European) Cab Lights, Socket Outlet; (European), Socket Outlet; Used With All Tractors Other Than John Deere 50 Series, Socket Outlet; (Ord W/ (2) 57m7089), Socket Outlet; (E: Convenience Electrical Outlet Socket), Socket Outlet, Socket Outlet; Convenience, Socket Outlet; Convenience Outlet, Socket Outlet; (M: Convenience Electrical Outlet Socket), Socket Outlet; Not For 50 Series, Socket Outlet; 2-Terminal	1
AR***03	Circuit Breaker; (1 Used Gasoline And Lp-Gas) (2 Used Diesel), Circuit Breaker; (20 Amp) (4 Used With Cab) (5 Used With Air Conditioning) (1 More Used With Outlet Socket), Circuit Breaker; (20 Amp) (4 Used With Cab) (5 Used With Air Conditioning) (One More Used With Outlet Socket), Circuit Breaker; 20 Amp Circuit, Circuit Breaker; R77493) (From Re11154), Circuit Breaker; 20 Amp, (Power Front Wheel Drive), Circuit Breaker; (3 Used, With Cab) (1 Used, Less Cab) 20 Amp, Circuit Breaker, Circuit Breaker; 20 Amp, (5 Used With Cab) (6 Used With Outlet Socket), Circuit Breaker; (4 Used With Cab), Circuit Breaker; 20amp, Circuit Breaker; 20 A, Circuit Breaker; (20 Amp) (5 Used With Cab) (1 More Used With Outlet Socket), Circuit Breaker; 20 Amp (Use With Field Lights), Circuit Breaker; 20 Amp (Outlet Socket), Circuit Breaker; (1 Used, If Required), Circuit Breaker; No.20 Amp. (A), Circuit Breaker; (20 Amp.) (A), Circuit Breaker; (A) 20 Amp., Circuit Breaker; 20 Amp, (5 Used With Cab), Circuit Breaker; 20 Amp (3 Used, With Cab, 1 Used, Less Cab), Circuit Breaker; (20 Amp) (Power Front Wheel Drive), Circuit Breaker; (5 Used With Cab) (6 Used With Outlet Socket), Circuit Breaker; (20 Amp), Circuit Breaker; 20 Amp, Circuit Breaker; 20 Amp, (For Field Lighting Bundle), Circuit Breaker; 20 Amp (Cab), Circuit Breaker; 20 Amp Circuit Breaker, Circuit Breaker; (A), Circuit Breaker; (A) 20 Amp, Circuit Breaker; Attach To Engine Compartment Relay	0

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Slip Clutch Alert

03***09	Bolt; 5/16" X 1", Bolt; 5/16" X 1" (Disk), Bolt; 5/16" X 1" (Use With 14h819), Bolt; (243, 244, 343, 344, 443, 444, 543, 546, 643, 644, 645, 843, 844), Bolt; 5/16" X 1" (213-8 Used; 215 And 216-10 Used; 218-12 Used; 220, 222, And 224-14 Used), Bolt; 5/16" X 1", Rd. Hd., Bolt; 5/16" X 1", (Grain, Corn And Bean), Bolt; (B) 5/16" X 1", Bolt; 5/16" X 1" (Use With N10213), Bolt, Bolt; X 5/16" X 1", Bolt; 5/16" X 1", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a, And 853a; 22 Used-854a And 1253a), Bolt; 7.925 X 25.400 mm (5/16" X 1"), Bolt; 5/16" X 1" (913-8 Used; 915-10 Used; 918-12 Used; 920, 922, And 924-14 Used; 925-16 Used, 930-20 Used), Bolt; 5/16" X 1", (Use With 12h303, 14h785), Bolt; 5/16" X 1" (913, 915, 918, 920-4 Used; 922, 924 And 925, 6 Used; 930-8 Used) (Thru Backsheet Angles), Bolt; 5/16"X1", Bolt; (W) 5/16" X 1", Bolt; 5/16" X 1" (Square Neck), Bolt; 5/16" X 1" (A), Bolt; (C) 5/16" X 1", Bolt; 7.925 X 25.400 mm (5/16" X 1") Reinforcement To Channel, Bolt; 5/16" X 1" (Sub For H75408), Bolt; (A) 5/16" X 1", Bolt; Rd. Hd., 5/16" X 1", Bolt; 5/16" X 1" (Use With 14h785)	2
12***97	Part Missing In Wise; 1/4" (F), Part Missing In Wise; 1/4", (Export), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; (A: For 9650 ( -69*00) & 9750 ( -6900)) 1/4", Part Missing In Wise; 1/4" (Tractor S/N -C225019), Part Missing In Wise; (A: For 9650 (6901- ) & 9750 (6901- )) 1/4", Part Missing In Wise; 1/4" (Tractor S/N S245017-), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (Nlr), Part Missing In Wise; 1/4" (Tractor S/N S236761-), Part Missing In Wise; 1/4" (Tractor S/N C234698-), Part Missing In Wise; 6.350 mm (1/4"), Lock Washer; 1/4", Part Missing In Wise; 1/4" (Tractor S/N C225020-), Part Missing In Wise; 1/4" (Tractor S/N -C234697), Part Missing In Wise; (A: For 9650 ( -6900) & 9750 ( -6900)) 1/4", Part Missing In Wise; (D) 1/4", Part Missing In Wise; 1/4", (Less Germany, France And Italy), Part Missing In Wise; Internal-Tooth 1/4", Part Missing In Wise; (B), Part Missing In Wise; 1/4", (Sub For R31578), Part Missing In Wise; 6.350 mm, Part Missing In Wise; Internal-Tooth, 1/4", Lock Washer, Part Missing In Wise; (A) 1/4", Part Missing In Wise; 1/4", (Nla), Part Missing In Wise; (B: Use With Ar93448) 1/4", Part Missing In Wise; (D) 1/4", Internal Tooth, Part Missing In Wise; 1/4" (Sub For 12h356), Part Missing In Wise; 6.350 mm (1/4") Internal Tooth, Part Missing In Wise; Internal Tooth, 1/4", Part Missing In Wise; (Sub For U12172), Part Missing In Wise; (A: See Your Authorized Repair Station For Parts Not Listed) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; (D), Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4" (Tractor S/N -S245016), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; 1/4", Part Missing In Wise, Part Missing In Wise; (A: For 9650 (6901- ) & 9750 (69*01- )) 1/4", Part Missing In Wise; 1/4", Internal-Tooth, Part Missing In Wise; 1/4" Incld In 14, Part Missing In Wise; 1/4", Internal Tooth, Part Missing In Wise; 1/4", (Nlr), Part Missing In Wise; 1/4", (Or), Part Missing In Wise; 1/4", Sp, Part Missing In Wise; 1/4" (Tractor S/N -S236760), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448)	1
19***65	Cap Screw; 3/8" X 2" Rh, Cap Screw; (A) (B) (C) 3/8" X 2", Cap Screw; 3/8" X 2" Hs, Sae 8, (Less Cab), Cap Screw; 3/8"X2", Cap Screw, Cap Screw; 3/8" X 2" (For R100727), Cap Screw; 3/8" X 2", (Sub For T20204 And R107734), Cap Screw; 3/8" X 2" (Sub For 19h255), Cap Screw; 3/8" X 2" (Sae 8) , Up, Cap Screw; 3/8" X 2", (Code 6201), Cap Screw; 3/8" X 2", (Use With Ar91662), Cap Screw; 3/8" X 2", Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -6900)) 3/8" X 2", Cap Screw; 3/8" X 2" Low, Lh, Cap Screw; 3/8" X 2" Hs, Sae 8, Cap Screw; (C) 3/8"X2", Cap Screw; 3/8" X 2" Sae 8, Cap Screw; (A), Cap Screw; 3/8" X 2", Cap Screw; 9.525 X 50.800 mm, (Sae 8), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 2" (Hs, Sae 8), Cap Screw; (A) (B) 3/8" X 2", Cap Screw; 3/8" X 2" (Sae 8), Up, Cap Screw; (A: Right Front Side Hole) 3/8" X 2", Cap Screw; 9.525 X 50.800 mm, Cap Screw; 3/8" X 2", Unf., Cap Screw; (A) 3/8"X2", Cap Screw; (A: 9550 ( -6900) 9550sh ( -69070) 3/8" X 2", Cap Screw; 3/8" X 2" (For 30, 32 And 40, 42 Ft), Cap Screw; 3/8" X 2", (6201), Cap Screw; 3/8" X 2" (Sub For 19h3267), Cap Screw; 3/8" X 2", Right Front Side Hole, Cap Screw; 3/8" X 2" (675b), Cap Screw; (B) 3/8" X 2", Cap Screw; 3/8" X 2", Code 2102 And 2108, Cap Screw; 3/8" X 2", (Code 2102), Cap Screw; 3/8" X 2", (Sub For T73548, This Application), Cap Screw; (B), Cap Screw; 3/8" X 2", (Sub For 19h3217, This Application), Cap Screw; (A) 3/8" X 2", (Use With R100727), Cap Screw; 3/8" X 2", (40 Used, 1217;65 Used, 1219), Cap Screw; 3/8" X 2", (3.7 M (12-Ft.) 22 Used Per Tooth Bar) (4.3 M (14-Ft.) 27 Used Per Tooth Bar) (5.0 M (16-Ft.) 30 Used Per Tooth Bar), Cap Screw; (B: Engine Pe3029tkv53 (260 High Flow)) 3/8" X 2", Cap Screw; 3/8" X 2", (Use With Ar97707), Cap Screw; 3/8" X 2", (6215), Cap Screw; 3/8" X 2", (Code 2320), Cap Screw; (A: For 9650 ( -7080) & 9750 ( -7028)) 3/8" X 2", Cap Screw; 3/8" X 2" Hs, Sae 8, (With Cab), Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 2", Cap Screw; 3/8" X 2" Sae 8; Up, Cap Screw; 3/8" X 2" (Hs, Sae 8), Cap Screw; 3/8"X2", For 3179dl016, Cap Screw; 3/8"X2", For 3179dl001, Cap Screw; 3/8" X 2", (Sae 8), Cap Screw; 3/8" X 2" (Sae 8) , Low, Lh, Cap Screw; (A: 5303 (0014- ), 5403 ( 0032- ), 5503 (0001- ).) 3/8" X 2" (Sub For 19h255), Cap Screw; 3/8" X 2" Sub For 19h255, Cap Screw; 3/8" X 2", (Use With R100682 This Application), Cap Screw; 3/8" X 2" (Dh-01, Dh-02) (Use When R56727 Has Been Installed), Cap Screw; 3/8" X 2", Up, Cap Screw; 3/8" X 2" -3/4", (Sae 8), Cap Screw; 3/8" X 2" Re., Cap Screw; 3/8" X 2", Unf, Cap Screw; 3/8" X 2", (Use With Re63295), Cap Screw; 3/8" X 2" (Use With Ar91662), Cap Screw; 3/8" X 2", Hs, Sae 8, Cap Screw; (A) 3/8" X 2" (Hs, Sae 8), Cap Screw; 3/8" X 2", (Sub For Mg29962), Cap Screw; 3/8" X 2" (Use With Re63295), Cap Screw; 3/8" X 2" 3/8"X2" (Sae 8), Cap Screw; 3/8" X 2", (10 Used,1217;13 Used,1219) Each Additional Tooth Bar, Cap Screw; (A: Separate Fertilizer Placement) 3/8" X 2", Cap Screw; 3/8" X 2" 3/8" X 2", Cap Screw; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 2", Cap Screw; (B) 3/8"X2", Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2", Cap Screw; 3/8" X 2" (Sae 8), Cap Screw; (A: 5045d(0075- ), 5055d(0019- ), 5045e(0074- ), 5055e(0075- ), 5065e(0002- ), 5075e(00*21- )) 3/8" X 2" Sub For 19h255, Cap Screw; (A) 3/8" X 2", Cap Screw; 3/8"X2	2
24***07	Washer; (A: Note; 9550 ( -70*00) 9550sh ( -7000)) 8.400 X 24 X 2 mm, Washer; (A: With Net Coveredge) 8.400 X 24 X 2 mm (For 19m7868), Washer; 8.400 X 24 X 2 mm To Retain M8 Bolts, Washer; (A: Used With Optional Double Twine Arm.) 8.400 X 24 X 2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8.400 X 24 X 2 mm, Washer; (G: Mc1 Cab) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm 20 Ft Use With The Auger, Washer; 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm Nlr, Washer; (A) 8,4x25x2mm, Washer; (G) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, (2701,9701), Washer; (A: For 9650 (6968- ) & 9750 (6958- )) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (Rice Only), Washer; (B: Without Net Wrapping) 8.400 X 24 X 2 mm, Washer; (A: ( -Xxxxxx) 7600-0085; 7700-0079; 7800-0049) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, Use With The 20ft Auger, Washer; 8,4mm, Washer; 8.400 X 24 X 2 mm, (Europe), Washer; 8.400 X 24 X 2 mm, Washer; (B), Washer; 8.400 X 24 X 2 mm (A) Rubber, Washer; 8.400 X 24 X 2 mm (Used On Line Straw Chopper), Washer; (A) 8,4mm \|, Washer; 8,4 X 24 X 2 mm (Sub For 24m7055), Washer; 8,4x25x2, Washer; 8.400 X 24 X 2 mm (Corn Only), Washer; 8.400 X 24 X 2 mm 8.4x24x2mm, Washer; 8.400 X 24 X 2 mm (A)(B), Washer; 8.400 X 24 X 2 mm (913 - 2 Used; 915 - 4 Used; 918 - 6 Used; 920, 922, 925, 930 - 8 Used), Washer; 8.400 X 24 X 2 mm (Use With 37m7096), Washer; 8.400 X 24 X 2 mm (Corn And Rice Only), Washer; 8.400 X 24 X 2 mm (Sub R230227), Washer; (A: W/ Hitch) (C) 8.400 X 24 X 2 mm, Washer; (C: Mc1 Cab) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm Rh, Washer; 8.400 X 24 X 2 mm, (2) R.H. Side (1) L.H. Side, Washer; 8.400 X 24 X 2 mm, (Hb-225), Washer; (B: Tss Transmission) 8.400 X 24 X 2 mm, Washer; 8,4x25mm, Washer; 8.400 X 24 X 2 mm (0.331" X 0.945" X 0.079"), Washer; Auger Slowdown, Washer; 8.400 X 24 X 2 mm (Sub For 24m7055), Washer; 8.400 X 24 X 2 mm, 20ft. Auger, Washer; 8.400 X 24 X 2 mm (A), (B), Washer; (A: Cab (4701- ), Straddle Mount (4601- )) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, (Also Order T17094, 19h1875, 14h785 And 12h303), Washer; 8.400 X 24 X 2 mm, (Sub For Ffsb114987), Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm 20', Washer; (A: 9550 (6901- ) 9550sh (6901- )) 8.400 X 24 X 2 mm, Washer; (A: 9550 ( -6900) 9550sh ( -6900)) 8.400 X 24 X 2 mm, Washer; (A: For 360 Mower) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (B), Washer; 0.331" X 0.945" X 0.079", Washer; 8.400 X 24 X 2 mm Use With The 20ft Auger, Washer; (A: Hitch) 8.400 X 24 X 2 mm, Washer; (A: Mexico) (B: Turkey) 8.400 X 24 X 2 mm, Washer; (A: Not For Hillmaster) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, Use With Rotary Air Screen Only, Washer; 8.400 X 24 X 2 mm M8, Washer; (B: For Rice) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, (Gas), Washer; 8.400 X 24 X 2 mm 8mm, Washer; (A) (B) 8.400 X 24 X 2 mm, Washer, Washer; 8.400 X 24 X 2 mm L.H., Washer; (A) 8.400 X 24 X 2 mm, Washer; 8,4x25x2mm, Washer; 8.400 X 24 X 2 mm (A), Washer; (C: Starting From Series Number 2109 (0701- ), 2111 (0601- ), 2113 (0604- ), 2115 (0602- )) (D: Starting From Series Number 2117 (0602- ), 2122 (0601- ), 2126 (0606- )) 8.400 X 24 X 2 mm 2130, Washer; (A: For 9650 (6901- ) & 9750 (6901- )) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (Europe), Washer; (B: W/ Regular Drawbar) (C) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm Front, Washer; (B: For 370 Mower) 8.400 X 24 X 2 mm, Washer; (A: Note; 9550 (7001- ) 9550sh (7001- )) 8.400 X 24 X 2 mm, Washer; 8x24x2mm, Washer; 8.4 X 24 X 2 mm, Washer; (F) 8.400 X 24 X 2 mm, Washer; (C: For 390 Mower) 8.400 X 24 X 2 mm, Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (For Rice Only), Washer; (F: Mc1 Cab) 8.400 X 24 X 2 mm, Washer; 8.4x24x2mm, Washer; (A) 8,4mm, Washer; (C) 8.400 X 24 X 2 mm, Washer; 0.331" X 0.945" X 0.079", (7 Nominal), Washer; 25 X 8,4 X 2 mm, Washer; (C: Up To Series 2111 ( -13397), 2113 ( -0603), 2115 ( -0601)) (D: Up To Series 2117 ( -0601), 2122 ( -13423), 2126 ( -06*05)) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (0.331" X 0.945" X 0.079") Auger Slowdown, Washer; 8.400 X 24 X 2 mm (Not On 930 Flex Arg), Washer; 8,4 X 24 X 2 mm, Washer; 8,4x24x2mm, Washer; 8 4x25x2mm, Washer; 8,4x25x2mm (Sub For L56238 Appl), Washer; 8.400 X 25 X 2mm, Washer; 8.400 X 24 X 2 mm (1293), Washer; (B: For Germany Only) 8.400 X 24 X 2 mm, Washer; (A: Only For North America And Japan) 8.400 X 24 X 2 mm, Washer; (A: With Net Coveredge) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm 8.400 X 25 X 2 mm, Washer; 8.400 X 24 X 2 mm Use With Wiring Harness Retainers, Washer; 8.400 X 24 X 2 mm Use With The 17 And 20ft Augers, Washer; 8.400 X 24 X 2 mm (All Models Except 930 Flex Arg)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Terminal And Wiring Kit

AA***22	Terminal; Mate-N-Loc, Terminal; (A) (G), Terminal; (A: 20 Ga. Wire) (G: 18 Ga. Wire), Terminal; (A) (18,20 Ga. Wire), Terminal; Each Aa33322 Contains (50) Terminal Pins., Terminal, Terminal; (A: Included In Pm797na Kit) Contains (50) Terminal Pins, Terminal; Mate-N-Lock, Terminal; (G: 18 Ga. Wire) (H: 20 Ga. Wire) (A), Terminal; (A) (G) (H), Terminal; Mate-N-Lok, Terminal; Contains (50) Terminal Pins, Terminal; (A: Included In Pm797na Kit) Each Aa33322 Contains (50) Terminal Pins., Terminal; (A: Included In Pm797na Kit) Each Aa33322 Contains (50) Terminal Sockets, Terminal; (A) (G: 18 Ga. Wire) (H: 20 Ga. Wire), Terminal; (G: Contains (50) Terminal Pins)	0
AL***6T	Connector; (I), Connector; (Sub For R32029), Connector; (A) (Sub For R32029), Connector; (Sub For R32029)2-Wire Bullett Connector, Connector, Connector; 2-Wire Bullet Connector, Connector; (I: 2-Wire Bullet Connector), Connector; Lead, Connector; (K: 2-Wire Bullet Connector), Connector; (Sub For R32029)2 Wire Bullet, Connector (20 In A Pkg.), Connector; (Sub For R32029)2 Wire Bullet (10 In A Pkg.), Connector; (1 Used, Regular; 2 Used, Special), Connector; 2-Wire Bullet Connector, (Sub For R32029), Connector; (Use With R32026, R77475 And T34067) (Sub For Ah81733), (Tail Lamp), Connector; (Use With Operator'S Cab), Connector; (Sub For R32029) 2-Wire Bullett Connector, Connector; (Use With Grain Tank Extensions), Connector; Conector Tipo Bala De 2 Alambres, Connector; 2-Wire Bullett Connector, (Sub For R32029), Connector; (1 Used, Regular; 1 Used, Special), Connector; (Use With Grain Tank Extension'S)	0
JD***61	Special Service Tool; (A) (12 Ga. Wire), Special Service Tool; (D), Special Service Tool; (D: 12 Ga. Wire), Special Service Tool; (D: 12 Ga. Wire) (A), Special Service Tool; (A) (D), Special Service Tool; (A) (D: 12 Ga. Wire), Special Service Tool	0
JD***63	Special Service Tool; (A) (20 Ga. Wire), Special Service Tool; (A), Special Service Tool; (A: 20 Ga. Wire), Special Service Tool; (H: 20 Ga. Wire) (A), Special Service Tool; (A) (H: 20 Ga. Wire), Special Service Tool; (A) (H)	0

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Electrical : Weatherpack Terminals And Connectors

R7***47	Seal; (Pkg. Of 5), Seal, Seal; Pkg. Of 5, Seal; (C: Pkg Of 5), Seal; (Pkg. Of 5), Seal; (C), Seal; (Pkg Of 5), Seal; (Pkg (5)), Seal; (B), Seal; (C), Seal; Package Of 5, Seal; Packg Of 5, Seal; (Packg (5)), Seal; Packg (5)	0
R7***48	Seal; (A: (61*80-): 4045tl063 With Re506367 Fuel Injection Pump, W/O Engine Control Unit) (B: (6163-): 4045tl054 With Re505570 Fuel Injection Pump, W/O Engine Control Unit) (C: (6160-): 4045tl055 With Re505571 Fuel Injection Pump, W/O Engine Control Unit), Seal; (Packg (5)), Seal, Seal; Pkg Of 5, Seal; (Package Of 5), Seal; (Pkg. Of 5), Seal; (A: (6160-): 4045tl055 With Re505571 Fuel Injection Pump, W/O Engine Control Unit) (B: (6105-): 4045tl055 With Re505573 Fuel Injection Pump, With Engine Control Unit), Seal; (A: For Cd4045tl051 (Dd16108), With Re506368 Fuel Injection Pump), Seal; (A: For Baletrak Wiring Harness) (B: For Isobus Wiring Harness), Seal; (Package Of 25), Seal; (Pkg Of 5), Seal; Package Of 5, Seal; (Pkg. Of 5) (Sub Re12331), Seal; Pkg Of 40, Seal; (B), Seal; (A: Cd4045tl052: For Fuel Injection Pump Re506369 And Re506370) (B: Cd4045tl053: For Fuel Injection Pump Re506371 And Re506372), Seal; Seal (Pkg. Of 5), Seal; (A: 5105: 3029dlv56, 5205: 3029dlv57), Seal; Packg (5), Seal; (Sub Re12331), Elec. Connector Accessory; (C), Seal; (A: Cd6068dl070), Elec. Connector Accessory; (Pkg. Of 5), Seal; (A: (6191-): 4045tl056 With Re505574 Fuel Injection Pump, W/O Engine Control Unit) (B: (6258-): 4045tl056 With Re505575 Fuel Injection Pump, With Engine Control Unit), Seal; (A: (6180-): 4045tl063 With Re506367 Fuel Injection Pump, W/O Engine Control Unit) (B: (6163-): 4045tl054 With Re505570 Fuel Injection Pump, W/O Engine Control Unit), Seal; Seal, Seal; (C), Seal; (Packg 5), Seal; (Pkg. Of 3), Seal; (A: 5105: 3029dlv56, 5205: 3029dlv57), Seal; (A: (616760cd-): 4045tl055 With Re505571 Fuel Injection Pump, W/O Engine Control Unit) (B: (616391cd-): 4045tl056 With Re505574 Fuel Injection Pump, W/O Engine Control Unit) (C: (619437cd-): 4045tl057 With Re505576 Fuel Injection Pump, W/O Engine Control Unit), Seal; Packg Of 5, Seal; (A: For Cd4045dl050 (Dd16106)) (B: For Cd4045tl050 (Dd16107)) (C: For Cd4045tl051 (Dd16108)), Seal; (A: Cd4045tl071), Seal; (C: Pkg Of 5), Seal; (A: (6191-): 4045tl056 With Re505574 Fuel Injection Pump, W/O Engine Control Unit) (B: (61**37-): 4045tl057 With Re505576 Fuel Injection Pump, W/O Engine Control Unit), Seal; (A), Seal; (A: For Cd4045tl052 (Dd16109)) (B: For Cd4045tl053 (Dd16111)), Seal; (Pkg (5)), Seal; (A: 6068dl070)	0
R7***49	Seal; (Pkg. Of 5), Seal, Seal; (G: Pkg Of 5), Seal; (C), Seal; 18 Or 20 Ga.Wire Package Of 5, Seal; Packg (5), Seal; 18 Or 20 Ga. Package Of 5 Wire, Seal; (Pkg. Of 5), Seal; (Packg (5)), Seal; (C), Seal; 18 Or 20 Ga. Wire, Seal; Package Of (5), Seal; Package Of 5, Seal; (A: For Baletrak Wiring Harness) (B: For Isobus Wiring Harness), Seal; (Pkg (5)), Seal; Pkg. Of 5, Seal; (Pkg Of 5), Seal; (C: Pkg Of 5), Seal; (B), Seal; Packg Of 5, Seal; 18 Or 20 Ga.Wire Package Of 40, Seal; Pkg Of (5)	0
R7***50	Seal, Seal; (C), Seal; Pkg. Of 5, Seal; (Pkg Of 5), Seal; (Pkg. Of 5), Seal; (Packg (5)), Seal; Package Of 5, Seal; Packg 5, Seal; (Pkg. Of 5), Seal; (Packg 5), Seal; (C), Seal; (Pkg (5)), Seal; ( Pkg Of 5 ), Seal; (Pkg. Or 5), Seal; Packg Of 5, Seal; (B), Seal; (C: Pkg Of 5), Seal; Packg (5)	0

See all parts with full part numbers in Heavy Parts AI →

Frame

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Axle Extensions (Without Kernel Processor) R.H./L.H. Side

14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	0
19***63	Cap Screw; 3/4" X 2-1/8" For Use With Non-Kp Machines, Cap Screw; (A) 3/4" X 2-1/8", Cap Screw; (A) 3/4"X2-1/8", Cap Screw; 3/4" X 2-1/8", Cap Screw; 3/4"X2-1/8", Cap Screw; (B) 3/4"X2-1/8", Cap Screw; (A: No Extensions Used) 3/4" X 2-1/8" Use Qty (4) On Lh Side; (2) Top Rh Side - Without Kernel Processor, Cap Screw, Cap Screw; (A: No Extensions Used) 3/4" X 2-1/8" Use Qty (4) Each On Lh And Rh Side- Without Kernel Processor, Cap Screw; (A) 3/4" X 2-1/8", Use Qty 4 Each On L.H. And R.H. Side - Without Kernel Processor	0
19***17	Cap Screw; 3/4" X 1-3/4", (Hs, Sae 8) (Row Crops, Corn Heads And One-Row Ear Corn Units), Cap Screw; 3/4" X 1-3/4" (Hs, Sae 8), Cap Screw; 3/4" X 1-3/4" (Use With Ar62196 Or Ar68254), Cap Screw; Hs, Sae 8, 3/4" X 1-3/4", Cap Screw; 3/4" X 1-3/4" Hs, Sae 8, Cap Screw; 3/4" X 1-3/4" Hs, Sae 8, 3/4" X 1-3/4", Cap Screw; 3/4" X 1-3/4", Cap Screw; 19.050 X 44.450 mm, Cap Screw; 3/4" X 1-3/4", Hs, Sae 8, U3/4x45, Cap Screw; 3/4" X 1-3/4", Cap Screw; 3/4" X 1-3/4" (Use With Ar62197), 3/4x45, Cap Screw; (A) 3/4" X 1-3/4", Hs, Sae 8, Cap Screw; 3/4" X 1-3/4", (Row Crops, Corn Heads And One-Row- Ear Corn Units)	0
19***96	Cap Screw; 3/4" X 4", Hs, Sae 8, Cap Screw; 3/4"X4", Cap Screw; 3/4"X4-3/4", Cap Screw; (A) 3/4"X4",12.4-24, Cap Screw; (M) (F) 3/4" X 4" (Hs, Sae 8) Middle Leaf Spring Only, Cap Screw; 3/4" X 4" Hs, Sae 8, (Swept Back), Cap Screw; (B: Category Iii) 3/4" X 4", Cap Screw; (B: Category Iv) 3/4" X 4" Hs, Sae 8, Cap Screw; 3/4" X 4", Torque To 270 Lb-Ft (366 N-M), Cap Screw; 3/4" X 4" Torque To 280 Lb-Ft(380 N-M) Using Never Sieze On Threads, Cap Screw; 3/4" X 4" (Hs, Sae 8), Cap Screw; 3/4" X 4" Hs, Sae 8, 3/4" X 4", Cap Screw; 3/4" X 4" Bottom - Extension To Frame (Rhside), Cap Screw; (B: (Xxxxxx- ) 4050-00*36; 4250-0191) 3/4" X 4" Hs, Sae 8, Cap Screw; (B: Category Iv/Ivn) 3/4" X 4" Hs, Sae 8, Cap Screw; (A: Category Iii) 3/4" X 4" Hs=10.9, Cap Screw; (A: Category Iii) 3/4" X 4", Cap Screw; 3/4" X 4", (Use With A17835) (Hs, Sae 8), Cap Screw; (F: (Xxxxxx- ) 4250-0191; 4450-02*71) 3/4" X 4" Hs, Sae 8, Cap Screw; (B: Category Iv/Ivn) 3/4" X 4", Cap Screw; 19.050 X 101.600 mm, Cap Screw; 3/4" X 4", Bottom - Extension To Frame (R.H.Side), Cap Screw; 3/4" X 4", Cap Screw; (N) 3/4" X 4" (Hs, Sae 8), Cap Screw; (A) 3/4"X4",13.6-24 Or 12.4-28, Cap Screw; (A: Category Iii) 3/4" X 4" Hs, Sae 8, Cap Screw; 3/4" X 4" Hs, Sae 8, Cap Screw; 3/4" X 4", (Use With A17835), Cap Screw; (B: Category Iv/Ivn) 3/4" X 4" Hs Sae 8, Cap Screw; (A) 3/4" X 4" Hs, Sae 8, Cap Screw; (A: Category Iv) 3/4" X 4"	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Corn Head Mounting Frame (243 And 244)

03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	2
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	10
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	10

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Discharge Spout

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	9
03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	2
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	2
11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Equal Angle Hitch 254 Mm (10") (35mm (1-3/8") Pto Shaft

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	4
19***16	Cap Screw; 5/8" X 1", Cap Screw, Cap Screw; 5/8" X 1" (To Cylinder Head), Cap Screw; 5/8" X 1" (Sub For R45693, This Application), Cap Screw; 5/8" X 1", (Sub For R45693, Appl), Cap Screw; 5/8" X 1", (Diesel), Cap Screw; 5/8"X1", Cap Screw; (B) 5/8"X1", Cap Screw; (A) 5/8"X1, Cap Screw; (A) 5/8"X1", Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*85; 8650-00*13) 5/8" X 1", Bolt, Cap Screw; 5/8" X 1", (1000rpm), Cap Screw; (A) 5/8" X 1", Cap Screw; 5/8" X 1", (Sub For R45693, This Application), Cap Screw; 5/8" X 1" (Sub For R45693, Appl)	2
19***33	Cap Screw; 15.875 X 139.700 mm (5/8" X 5-1/2") 5/8" X 5-1/2", Full Thread, Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Full Thread	4
24***65	Washer; 21/32" X 1" X .090", Washer; 21/32" X 1" X 0.090", Washer; (B) 21/32" X 1" X 0.090", Washer; 21/32" X 1" X 0.090" (8 Nominal), Washer; 21/32"X1", Washer; 21/32" X 1" X .090", Ar, Washer; 21/32" X 1" X 0.090" (Sub For 24h1772), Washer; 21/32"X1".090", Washer; 21/32"X1"X.090", Washer, Washer; (A) 21/32" X 1" X 0.090", Washer; 21/32"X1"X.09", Washer; (C) 21/32"X1"X.09", Washer; (A) 21/32"X1"X0.090", Washer; 21/32" X 1" X 0.090" 21/32" X 1" X 0.060", Washer; 21/32" X 1" X 0.090", (8 Nominal)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Feed Roll Drive Shield

AE***13	Shield; (Sub Ae73481)	1
AE***81	Shield	1
T5***54	Bolt; 1/2" X 3/4", Manifold; C\|Case : Bushing - Order The Reference ....... 1 T54908 Poclain : Manifold - Part Not Longer Available ....... 1 Nls; Pipe, Bolt; 1/2" X 3/4", (Sub For T56211, 24h1786 And N158032, This Application)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Float System Hydraulics And Electrical

03***80	Bolt; 5/16" X 2", Full Thread, Bolt; 5/16" X 2"	2
12***97	Part Missing In Wise; 1/4" (F), Part Missing In Wise; 1/4", (Export), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; (A: For 9650 ( -69*00) & 9750 ( -6900)) 1/4", Part Missing In Wise; 1/4" (Tractor S/N -C225019), Part Missing In Wise; (A: For 9650 (6901- ) & 9750 (6901- )) 1/4", Part Missing In Wise; 1/4" (Tractor S/N S245017-), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (Nlr), Part Missing In Wise; 1/4" (Tractor S/N S236761-), Part Missing In Wise; 1/4" (Tractor S/N C234698-), Part Missing In Wise; 6.350 mm (1/4"), Lock Washer; 1/4", Part Missing In Wise; 1/4" (Tractor S/N C225020-), Part Missing In Wise; 1/4" (Tractor S/N -C234697), Part Missing In Wise; (A: For 9650 ( -6900) & 9750 ( -6900)) 1/4", Part Missing In Wise; (D) 1/4", Part Missing In Wise; 1/4", (Less Germany, France And Italy), Part Missing In Wise; Internal-Tooth 1/4", Part Missing In Wise; (B), Part Missing In Wise; 1/4", (Sub For R31578), Part Missing In Wise; 6.350 mm, Part Missing In Wise; Internal-Tooth, 1/4", Lock Washer, Part Missing In Wise; (A) 1/4", Part Missing In Wise; 1/4", (Nla), Part Missing In Wise; (B: Use With Ar93448) 1/4", Part Missing In Wise; (D) 1/4", Internal Tooth, Part Missing In Wise; 1/4" (Sub For 12h356), Part Missing In Wise; 6.350 mm (1/4") Internal Tooth, Part Missing In Wise; Internal Tooth, 1/4", Part Missing In Wise; (Sub For U12172), Part Missing In Wise; (A: See Your Authorized Repair Station For Parts Not Listed) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; (D), Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4" (Tractor S/N -S245016), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; 1/4", Part Missing In Wise, Part Missing In Wise; (A: For 9650 (6901- ) & 9750 (69*01- )) 1/4", Part Missing In Wise; 1/4", Internal-Tooth, Part Missing In Wise; 1/4" Incld In 14, Part Missing In Wise; 1/4", Internal Tooth, Part Missing In Wise; 1/4", (Nlr), Part Missing In Wise; 1/4", (Or), Part Missing In Wise; 1/4", Sp, Part Missing In Wise; 1/4" (Tractor S/N -S236760), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448)	1
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	1
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Float System Springs

11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	2
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	4
19***84	Cap Screw; 5/8" X 8-1/2", Full Thread, Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (Sub For 08h4718)	4
24***65	Washer; (A) 20,62 X 31,75 X 1,52 mm, Washer; 13/16" X 1-1/4" X 0.060", 25/32" X 1-1/4" X .075", Washer, Washer; 13/16" X 1-1/4" X 0.060", Washer; 20.625 X 31.750 X 1.524 mm (13/16" X 1-1/4" X 0.060"), Washer; 20,62 X 31,75 X 1,52 mm, Washer; 13/16" X 1-1/4" X .060", Washer; 13/16"X1-1/4"X.060"	6

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Front Main Drive Line Cover

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	2
03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	1
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	7
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Harvesting Unit Float System

03***46	Bolt; (C) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4" L.H., Bolt; 1/2" X 1-1/4" (Flexible), Bolt; 1/2" X 1-1/4", (For 1985 Machines And Up), Bolt; 1/2" X 1-1/4" (A), Bolt; 1/2" X 1-1/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 1/2" X 1-1/4", Bolt; (Use With E64519), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4") (1253a), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4" Grass Seed Special, Bolt; 1/2" X 1-1/4", Bolt; 1/2"X31,7, Bolt, Bolt; 1/2" X 1-1/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, 224-16 Used), Bolt; 1/2" X 1-1/4", (United Kingdom Only), Bolt; 1/2"X1-1/2", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (327, 336, 337, 346 And 347 Balers), Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/4", Gr. 8	4
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	14
19***90	Cap Screw; 12.700 X 57.150 mm, Incld In A, Cap Screw; 1/2" X 2-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 2-1/4", Qty. Per Rotor, Cap Screw; 1/2" X 2-1/4", (Use With R54843 Or R64306), Cap Screw; 1/2" X 2-1/4" (B), Cap Screw; 1/2" X 2-1/4", (Upper), Cap Screw; 1/2"X2-1/4" (For T20217), Cap Screw; 12.700 X 57.150 mm (1/2" X 2-1/4") (Hs, Sae 8), Cap Screw; 1/2" X 2-1/4", (Use With T20036), Cap Screw; 1/2" X 2-1/4" (Sub For T125625, This Application), Cap Screw; 1/2" X 2-1/4", (Less Rear Exhaust), Cap Screw; 1/2" X 2-1/4", (Hs, Sae 8), Cap Screw; 1/2" X 2-1/4" Hs, Sae 8, (Sub For R48784), Cap Screw; (B) 1/2" X 2-1/4", Cap Screw; 1/2" X 2-1/4", R.H., Cap Screw; 1/2" X 2-1/4", Cap Screw; 12.700 X 57.150 mm, Cap Screw; 1/2" X 2-1/4", (Hc), Cap Screw; 1/2" X 2-1/4", (Use With R54843 Or R63406), Cap Screw; 1/2" X 2-1/4", (Rear Exhaust), Cap Screw; (W/Al37858), Cap Screw; (A: Include In Cb11415851 Retainer Kit) 1/2" X 2-1/4", Cap Screw; Hs, Sae 8, 1/2" X 2-1/4", Cap Screw; 1/2"X2-1/4", Cap Screw; (A) 1/2" X 2-1/4", Cap Screw; (A) 1/2"X2-1/4", Cap Screw; 1/2" X 2-1/4", (Less Rear Exhaust Or Selective Control Valve), Cap Screw; (A: Power Shift Transmission) 1/2" X 2-1/4", Cap Screw; 1/2" X 2-1/4", (Sub For R48784)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Hydraulic Or Manual Wagon Hitch

12***04	Part Missing In Wise; 3/8", Outer, Part Missing In Wise; (A: Not Required) 3/8", Part Missing In Wise; (E) 3/8", Part Missing In Wise; 3/8" (B) (C), Part Missing In Wise; 3/8" (Not Longer Required), Part Missing In Wise; (C: (-Xxxxxx) 4050-00*92; 4250-0153; 4450-0281) 3/8" (Sub For R53668), Part Missing In Wise; 3/8", (Use With 19h3219) (Not Required With E55662), Part Missing In Wise; 3/8" (4050), Part Missing In Wise; 3/8", (Sub For Mg80679), Part Missing In Wise; 3/8", (Code 3904), Part Missing In Wise; 3/8" (B), Part Missing In Wise; (A: 5103e/5104/5204/5038d(0001-), 5103/5103s(0091-), 5203(0082-).) 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With H108673), Part Missing In Wise; 3/8" (Saran Cd), Part Missing In Wise; 3/8", (Rs, Ut, Or), Part Missing In Wise; (B) (C) 3/8", Part Missing In Wise; 3/8", (Delco Remy), Part Missing In Wise; (B: Hi-Crop) 3/8", Part Missing In Wise; 3/8", (Not Used With E55662), Part Missing In Wise; (B: W/O Sound-Gard Body) 3/8", Part Missing In Wise; 3/8" (Use With R59409), Part Missing In Wise; 3/8", (Code 1601 And 1610), Part Missing In Wise; 3/8" (Pulley To Fan Spacer) Code 2314 (Af Only), Part Missing In Wise; (A) Roosa Master Dp,3/8", Part Missing In Wise; 3/8" (Sub For Ar52325), Part Missing In Wise; (A: From Sr.No.5103e/5103/5103s/5203-1272, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; (C: Not Required) 3/8", Part Missing In Wise; 3/8" (913, 915, 918 And 924), Part Missing In Wise; 3/8", (Ru And Or), Part Missing In Wise; 3/8", (Rs), Part Missing In Wise; (B: (Xxxxxx-) 4555-0100; 4755-0101; 4955-0149) 3/8", Part Missing In Wise; 3/8" (Radiator Brace Strut), Part Missing In Wise; X X (A) 3/8", Lock Washer; 3/8", Part Missing In Wise; (A) 3/8", (Use With R59409), Part Missing In Wise; 3/8", (Code 3102) (Not Req. W/E55662), Part Missing In Wise; 3/8", (Sub For Mg80680 And Mg80702), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8", (No Longer Required With 19h1936), Part Missing In Wise; 3/8", (Not Required With E55661), Part Missing In Wise; 3/8" (Without Dial-A-Matic), Part Missing In Wise; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Part Missing In Wise; 3/8", (Ru), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0018; 8650-0097) 3/8", Part Missing In Wise; 3/8" Rh, Part Missing In Wise; 3/8" (Use With R53382), Part Missing In Wise; 9.525 mm (3/8") (854a, -6150; 1253a, -6100), Part Missing In Wise; 3/8", (Not Req. W/E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With 14h812), Part Missing In Wise; 3/8", (Not Required W/E55662), Part Missing In Wise; (B: (Xxxxxx-) Serial No. 8450-0019; 8650-0098) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) 3004 And 3005, Part Missing In Wise; 3/8", (Code 4102), Part Missing In Wise; 3/8" (Use With 19h3267), Part Missing In Wise; 3/8", 6216, Part Missing In Wise; 3/8", (Not Required W/ E55662), Part Missing In Wise; (A: (-Xxxxxx) 4250-0071; 4450-0105) 3/8", Part Missing In Wise; (No Longer Required With R41041), Part Missing In Wise; 3/8", (Standard Models), Lock Washer; 3/8", (Use With 19h2284) (Use With 19h2284), Part Missing In Wise; 3/8" Hi-Crop, Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0048; 8650-0090) 3/8", Part Missing In Wise; 3/8" W/Rg, Part Missing In Wise; 3/8" (Sub For Mg80680), Part Missing In Wise; (B: (-Xxxxxx) 4650-0055; 4850-0027) 3/8", Part Missing In Wise; 3/8", 730 Tractor, Part Missing In Wise; 3/8", For 12' Harrow, Part Missing In Wise; 3/8" (Less Power Take-Off), Part Missing In Wise; 3/8", (Use With R191204), Part Missing In Wise; 3/8" 3/8" X 3/4", Part Missing In Wise; (A) 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Nlr For E55662), Part Missing In Wise; 3/8", (Not Used On 570), Part Missing In Wise; 3/8", (22 Used, Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", For 3179dl016, Part Missing In Wise; 3/4", Part Missing In Wise; (Use With 14h1076), Part Missing In Wise; 3/8", (Diesel), Part Missing In Wise; 3/8", (No Longer Required With 19h3483), Part Missing In Wise; 3/8", Roll Top, Part Missing In Wise; (B: 2 Used Dual, 3 Used Triple) 3/8", Part Missing In Wise; 3/8", (Use With Ar87023 Or Ar87024), Part Missing In Wise; 3/8", Code 2311 (Af, Af001) (Pulley To Fan Spacer), Part Missing In Wise; (A: Less Rockshaft) 3/8", Part Missing In Wise; (C: (-Xxxxxx) 4050-0092; 4250-0153; 4450-0281) 3/8", Part Missing In Wise; 3/8", (Manual), Part Missing In Wise; 3/8" 3/8" Ar, Part Missing In Wise; 3/8", (Orchard Fenders), Part Missing In Wise; (A: Less Power Take-Off) 3/8", Part Missing In Wise; 3/8", Use With Furrower, Part Missing In Wise; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8", Part Missing In Wise; (A) (B) (C) 3/8", Part Missing In Wise; 3/8", Code 2311(Tf), Part Missing In Wise; (A) (C) (E) 3/8", Part Missing In Wise; (C: Use With Ar55639, Ar62267, Ar77254, Re13722, Re41875, Ty6701, Ty6710 And Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", (Use With R90994), Part Missing In Wise; 3/8", (Sub For T11088), Part Missing In Wise; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", (Not Req. W/ E55662), Part Missing In Wise; 3/8" (Use With R55396), Part Missing In Wise; 3/8", (3 Used 4640 (B)) (2 Used 4840), Part Missing In Wise; 3/8" (With Dial-A-Matic), Part Missing In Wise; 3/8, Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf), Part Missing In Wise; 3/8", (2 On Level Land;1 On Sidehill), Part Missing In Wise; 3/8" (Use With 19h2284), Part Missing In Wise; 3/8" (Not Shown), Part Missing In Wise; 3/8" (For Ar68802), Part Missing In Wise; (C) 3/8", (Not Required With E55662), Part Missing In Wise; 9.525 mm, (Saran Cd), Part Missing In Wise; 3/8" Na, Part Missing In Wise; 3/8", (Used With Gresen Valve), Part Missing In Wise; 3/8" (920, 922, 925 And 930), Part Missing In Wise; 3/8", For 3.0 M (10') Size, Part Missing In Wise; 3/8", (Not Required With E55662) (3011, 3016), Part Missing In Wise; 3/8", (Use With Re30427), Part Missing In Wise; 3/8", For 8-Tooth Section, Part Missing In Wise; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Part Missing In Wise; 3/8", (5 Used Syncro-Range) (6 Used Power Shift), Part Missing In Wise; (B: Less Rockshaft) 3/8", Part Missing In Wise; 3/8", (Use With T25701), Part Missing In Wise; 3/8", (4 Used Dual Selective Control), Part Missing In Wise; 3/8" (Rigid), Part Missing In Wise; 3/8", (Use With 24m7096), Part Missing In Wise; (A: (-Xxxxxx) 4650-0065; 4850-0001 (Pst)) 3/8", Part Missing In Wise; 3/8" (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Alternator To Dash), Part Missing In Wise; (Nlr With R41041), Part Missing In Wise; 3/8", (Hb-G, Gh-01), Part Missing In Wise; 3/8", (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Use With R82180 Or R100676) Code 2501 And 2503, Part Missing In Wise; 3/8", (Rc And St), Part Missing In Wise; 3/8", (Use With 19h2284), Part Missing In Wise; 3/8" (132", -6874; 154", -6809), Part Missing In Wise; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Part Missing In Wise; 3/8", (Or), Part Missing In Wise; 3/8", (Use With 19h3219), Part Missing In Wise; 9.525 mm (3/8"), Part Missing In Wise; 3/8", (Rs, Ru, Rus, Ut, Or), Part Missing In Wise; 3/8" (Use With At24256 Or At31394), Part Missing In Wise; 3/8" (No Longer Required), Part Missing In Wise; 3/8", For 915, Part Missing In Wise; 3/8" (For 19h2676, 19h1648), Part Missing In Wise; 3/8", (Adjustable Rear Axle), Part Missing In Wise; 3/8" (918 Rigid), Part Missing In Wise; (C: 42" Tire) 3/8", Part Missing In Wise; 3/8", (Use With R82180 Or R100676), Part Missing In Wise; 3/8", (Use With H108673), Part Missing In Wise; 3/8", (Not Req. With E55662), Part Missing In Wise; 3/8", (2 Used Single Selective Control) (4 Used Dual Selective Control), Part Missing In Wise; (Sub For R53668), Part Missing In Wise; 3/8", For 3.7 M (12') Size, Part Missing In Wise; 3/8" (For R57059), Part Missing In Wise; 3/8" (Nlr), Part Missing In Wise; (A: (-Xxxxxx)4755-0103;4955-0124) 3/8", Part Missing In Wise; 3/8" (Sgb), Part Missing In Wise; 3/8", (120 Used L.H.) (120 Used R.H.), Part Missing In Wise; 3/8" (Less Rockshaft), Part Missing In Wise; 3/8", (Use With H149504), Part Missing In Wise; 3/8", 2350, Part Missing In Wise; 3/8", (Code 2819), Part Missing In Wise; 3/8", (Cable), Part Missing In Wise; (A: Code 2501) (B: Code 2502) 3/8", Part Missing In Wise; 3/8", (Cab), Part Missing In Wise; 3/8" 918 (6501-) 75 Used, Part Missing In Wise; 3/8", (1 Used L.H.) (1 Used R.H.), Part Missing In Wise; (Lu) (Orchard Fenders), Part Missing In Wise; 3/8", (Dn-02), Part Missing In Wise; 3/8" (Sub For (2) Mg80680), Part Missing In Wise; 3/8" (Use With R53396), Part Missing In Wise; 3/8", (Not Req. W/E55662), Part Missing In Wise; Ar, 3/8", Part Missing In Wise; 3/8", (Code 2111 And 3904), Part Missing In Wise; 3/8", (Use With Am124305 Front Frame), Part Missing In Wise; 3/8" (Code 4101), Part Missing In Wise; 3/8" (Level Land), Part Missing In Wise; 3/8" 3/8", Part Missing In Wise; (A: Mexico) (B: Turkey) 3/8", Part Missing In Wise, Part Missing In Wise; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8" (No Longer Required With R41041), Part Missing In Wise; 3/8", (Sub For T12634), Part Missing In Wise; 3/8", (Lp-Gas), Part Missing In Wise; 3/8", Used With Steel Moldboard, Part Missing In Wise; 3/8" Nla, Part Missing In Wise; 3/8", For 600 And 610, Part Missing In Wise; (B: Engine Serial No.) 3/8", Part Missing In Wise; (B: Radar Bracket To Transmission Sump Line Shield Bracket Screw) 3/8", Part Missing In Wise; 3/8", (A), Part Missing In Wise; (A) 3/8", Mechanical Front Wheel Drive, Part Missing In Wise; 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Part Missing In Wise; 3/8", Ar, Part Missing In Wise; (B: (Xxxxxx-) Esn 4650-3215; 4850-3246) 3/8", Part Missing In Wise; (A: From Sr.No. 5038d(0062-)) 3/8", Part Missing In Wise; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Part Missing In Wise; (A: From Sr.No.5103s/5203-1272, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Part Missing In Wise; 3/8" (Sgb) Nlr, Part Missing In Wise; (A: Power Shift Transmission) 3/8", Part Missing In Wise; 3/8", (Sub K40003, This Application Only), Part Missing In Wise; (A: W/O Sound-Gard Body) 3/8", Part Missing In Wise; (K) 3/8", Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8" (Flexible), Part Missing In Wise; (B: (Xxxxxx-) 4560-0021; 4760-0079; 4960-0006) 3/8", Part Missing In Wise; 3/8", (Sub For R53668), Part Missing In Wise; (A) (B) 3/8", Part Missing In Wise; 3/8", Internal Tooth, Part Missing In Wise; 3/8", (Ea-G, Ge-01), Part Missing In Wise; 3/8" (Use With Delco-Remy), Part Missing In Wise; 3/8", Code 2314 (Af Only), Part Missing In Wise; 3/8" (4 Used, Rh; 5 Used, Lh), Part Missing In Wise; (A: Use With Ar87205) 3/8", Part Missing In Wise; 3/8", (Use With 14h1076 And 19h3239), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0013; 8650-0023) 3/8", Part Missing In Wise; 3/8", For Spike-Tooth Sections, Part Missing In Wise; 3/8" (W/O Sgb), Part Missing In Wise; 3/8", (Use With 19h3239), Part Missing In Wise; (C: 3 Used Triple, 4 Used Quad) 3/8", Part Missing In Wise; 3/8" (Use With Re61087), Lock Washer; 3/8", (Use With R125195), Part Missing In Wise; X, Part Missing In Wise; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Part Missing In Wise; 3/8", (Use With Re33058), Part Missing In Wise; 3/8", (Nlr), Part Missing In Wise; (A: For Steel Moldboard) 3/8", Part Missing In Wise; (A: W/O Sgb) 3/8", Part Missing In Wise; 3/8", (Less Power Steering), Part Missing In Wise; 3/8", (Use With R59409 Or R81072), Part Missing In Wise; 3/8", For 4.6 M (15') Size, Part Missing In Wise; 3/8" (Sub T56055), Part Missing In Wise; (A: For Switzerland Only) 3/8", Part Missing In Wise; 3/8", (Mower Bar Only), Part Missing In Wise; (A) (B) (C) (D) 3/8", Part Missing In Wise; (Orchard Fenders), Part Missing In Wise; (A: (-Xxxxxx) 4650-0177; 4850-0115) 3/8", Lock Washer; 9.525 mm (3/8"), Part Missing In Wise; 3/8", 1350, Part Missing In Wise; 3/8", (Use With 19h2104 And 19h2855), Part Missing In Wise; 3/8", (Code 3903), Part Missing In Wise; 3/8", For 400, Part Missing In Wise; 3/8" To Secure Battery Cables To Frame, Part Missing In Wise; 3/8", For 15'3" Harrow, Part Missing In Wise; 3/8" (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; 3/8" (A), Part Missing In Wise; 3/8" (Use With 19h3239), Part Missing In Wise; 3/8", Terminal, Part Missing In Wise; 3/8" (Not Required W/E55662), Part Missing In Wise; 3/8", For 3179dl001, Part Missing In Wise; (A) 3/8", Part Missing In Wise; 3/8" (Use With H149504), Part Missing In Wise; 3/8" (Sub For R53668), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8", Part Missing In Wise; (A: (-Xxxxxx) Esn 4650-3214; 4850-3245) 3/8", Part Missing In Wise; 3/8", (750), Lock Washer; 3/8", (Sub For Ffsb107931), Part Missing In Wise; 3/8", (Use With R81911) Code 2501 And 2503, Part Missing In Wise; 3/8" (34 Harvester), Part Missing In Wise; (A: Contained In Ar94567) 3/8", Part Missing In Wise; (A: 5045d(0075-), 5055d(0019-), 5045e(0074-), 5055e(0075-), 5065e(0002-), 5075e(0021-)) 3/8", Part Missing In Wise; 3/8", For 810, Part Missing In Wise; (F: Used With Steel Moldboard) 3/8", Part Missing In Wise; 3/8", (13 Used, Rc And St) (11 Used, Ru And Or), Part Missing In Wise; 3/8", For 10' Harrow, Part Missing In Wise; (Use With 19h2284), Part Missing In Wise; 3/8", (St), Part Missing In Wise; 3/8", (Use With Ar77343), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" (Nlr), Part Missing In Wise; 3/8" (For 19h3267), Part Missing In Wise; (A) 3/8", (No Longer Available), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8", Used With Fiber Glass Seed Hopper, Part Missing In Wise; 9.525 mm (3/8") (Use With 19h1936), Part Missing In Wise; 3/8", (Rc, Ru, Rus), Part Missing In Wise; 3/8", (Not Required With 19h1936), Part Missing In Wise; 3/8", (2 Used, Variable Drive; 4 Used, Long), Part Missing In Wise; 3/8", (Code 6205), Part Missing In Wise; (A: (-Xxxxxx)4560-0027;4760-0050;4960-0054) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) (Use With 19h3219), Part Missing In Wise; 3/8", (Use With R125586), Part Missing In Wise; 3/8" (Pst), Part Missing In Wise; 3/8", Used On Beet Planter, Part Missing In Wise; (B: 24 And 224 Balers) 3/8", Part Missing In Wise; (E) 9.525 mm (3/8"), Part Missing In Wise; 3/8" (A), (B), Lock Washer; 3/8", (Use With 19h3239), Part Missing In Wise; 3/8", (Sub R44302), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Part Missing In Wise; 3/8", (Not Longer Required), Part Missing In Wise; (No Longer Required), Part Missing In Wise; 3/8", (Use With 24h1303), Part Missing In Wise; 3/8" Lh, Part Missing In Wise; 3/8", (Use With R59409), Part Missing In Wise; 9.525 mm, Part Missing In Wise; 3/8", (Sub K40003, This Application), Part Missing In Wise; 3/8", (2 Used Single) (4 Used Dual), Part Missing In Wise; 3/8" Battery Terminal (1 Used Single Battery) (2 Used Dual Battery) (Use With Ar66424), Part Missing In Wise; 3/8", (Use With A24646 Or A24647 And A24651), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" (Nlr), Part Missing In Wise; 3/8" (Not Req. With E55662), Part Missing In Wise; 3/8", (Mower Bar), Part Missing In Wise; 3/8", (Cornhead Attachment), Part Missing In Wise; 3/8", (Ru, Rc), Part Missing In Wise; (Sub F16202), Part Missing In Wise; 3/8", 28-Inch Rows, Part Missing In Wise; (A: Engine Serial No.) 3/8", Part Missing In Wise; (C), Part Missing In Wise; 3/8", (Code 1701, 1702 And 1703), Part Missing In Wise; 3/8", Code 3905, Part Missing In Wise; 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Use With Ar11116), Part Missing In Wise; 3/8" (Rg), Part Missing In Wise; 3/8" (8 Used Dual) (12 Used Triple), Part Missing In Wise; 3/8", (No Longer Required With R41041), Part Missing In Wise; (B) 3/8", Part Missing In Wise; 3/8" (Qrt), Part Missing In Wise; 3/8", (Use With R114130, 14h812 And 19h3219), Part Missing In Wise; 3/8" (Not Required), Part Missing In Wise; 3/8", (Code 2108), Part Missing In Wise; 3/8" (D), Part Missing In Wise; 3/8" (No Longer Required, This Application), Part Missing In Wise; 3/8", (Motorola), Part Missing In Wise; 3/8" (Nla), Part Missing In Wise; 5/16", Part Missing In Wise; 3/8", (No Longer Required), Part Missing In Wise; 3/8", (Code 2101, 2102, Or 2109), Part Missing In Wise; 3/8" (Fan To R100682, R100676, R90561 Or R82180) Code 2314 (Af Only), Part Missing In Wise; 3/8", (Use With 14h1076), Part Missing In Wise; 3/8", (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Use With Ar55094), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8", Part Missing In Wise; (A: From Sr. No. 5103s-0091, 5203-0082, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; (B) 3/8", (Sub For R1870r), Part Missing In Wise; (C: Carbon Brush Conductor) 3/8", Part Missing In Wise; 3/8", For Gauge Shoe, Part Missing In Wise; 3/8", For R128566, R131753, Part Missing In Wise; 3/8", (Ea-D, Ea-G, Ha-G, De-01, Ge-01), Part Missing In Wise; (C: 5303 (-0007), 5403 (-0042).) 3/8", Part Missing In Wise; 3/8", (Use With 19h2676), Part Missing In Wise; 3/8", Fertilizer Opener, Part Missing In Wise; No 10, Part Missing In Wise; (A: From Sr.No. 5103s(0167-), 5104(0162-), 5204(00*15-)) 3/8", Part Missing In Wise; (A) (C) 3/8", Part Missing In Wise; X X X 3/8", Part Missing In Wise; 3/8", (Delco-Remy), Part Missing In Wise; (Code 1709), Part Missing In Wise; 3/8", (Use With Ar87024 Or Ar87023), Part Missing In Wise; 3/8", 4020 Or 4010 Tractor, Part Missing In Wise; (A) (B) 9.525 mm (3/8"), Part Missing In Wise; 3/8", (To Clip), Part Missing In Wise; 3/8", 2 Or 4 Used, Part Missing In Wise; 3/8", (Used With Victor Valve), Part Missing In Wise; 3/8", (Row-Crop), Part Missing In Wise; 3/8", (Use With Re19265), Part Missing In Wise; 3/8", For B27852 Only, Part Missing In Wise; 3/8" Low, Part Missing In Wise; 3/8" (A) (B), Part Missing In Wise; 3/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Part Missing In Wise; 3/8", (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; (A), Part Missing In Wise; 3/8", (Code 7001, 7002, 7003, And 7004), Part Missing In Wise; 3/8", Code 2311(Af, Af001), Part Missing In Wise; 3/8", (4 Used, Variable Drive; 6 Used, Long), Part Missing In Wise; 3/8", External Tooth, No. 10, Part Missing In Wise; 3/8" Ar, Part Missing In Wise; 3/8", (A), (D), Part Missing In Wise; (C) 3/8", Part Missing In Wise; 3/8", Part Missing In Wise; 3/8", 8650 Tractor, Part Missing In Wise; 3/8", (31 Used, 6'; 43 Used, 8'), Part Missing In Wise; 3/8", (Use With Ar36849), Part Missing In Wise; 3/8", (Regular), Part Missing In Wise; 3/8" (Use With R191204), Part Missing In Wise; (A: Assembly Listed Below Contains All Parts Identified By (A):) 3/8" (Use With R59409), Part Missing In Wise; 3/8", (No Longer Available), Part Missing In Wise; (A: Quad-Range Transmission) 3/8", Part Missing In Wise; 3/8", (Afd - No Longer Required), Part Missing In Wise; (E) 3/8", (Use With Ar66424), Part Missing In Wise; 3/8", Code 3907, Part Missing In Wise; 3/8" 3\8", Part Missing In Wise; 3/8", (Code 4101), Part Missing In Wise; 3/8" (Not Required W/E55662 Or 14h1090), Part Missing In Wise; (D) 3/8", Part Missing In Wise; 3/8" ((1) Per Spare Shear Bolt), Part Missing In Wise; 3/8" (6620 Sidehill), Part Missing In Wise; (A) 3/8", Outer, Part Missing In Wise; 3/8", 28" Rows Only, Part Missing In Wise; 3/8", For 6-Tooth Section, Part Missing In Wise; 3/8", 4010 Or 4020 Tractor, Part Missing In Wise; 3/8", (Saran Cd), Part Missing In Wise; 3/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Part Missing In Wise; 3/8", (Sub T56055), Part Missing In Wise; (A: No Longer Required) 3/8", Part Missing In Wise; 3/8", (18 Used Steel Pan) (21 Used Cast Iron Pan), Part Missing In Wise; 3/8", (6401), Part Missing In Wise; 3/8", (Not Required), Part Missing In Wise; 3/8", (Use With Ar66424 Or At25619), Part Missing In Wise; 3/8", (Not Req W/ E55662), Part Missing In Wise; (A) (B) (D) (E) 3/8", Part Missing In Wise; 3/8", (650), Part Missing In Wise; 3/8", (K1) (K2), Part Missing In Wise; 3/8" (Use With Motorola), Part Missing In Wise; 3/8", No. 20 Hitch, Part Missing In Wise; 3/8" (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Or, Rs, Rus, Ut), Part Missing In Wise; Internal-Tooth, No. 10, Part Missing In Wise; 3/8" (Use With Ae24403), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662), Part Missing In Wise; 3/8", (16 Used, 6'; 24 Used, 8'), Part Missing In Wise; 3/8", Code 2311 (Tf) (Pulley To Fan Spacer)	1
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	1
19***35	Cap Screw; 1/2" X 2", Hs, Sae 8 (8 Used, Less Spout-Trak)(6 Used, With Spout-Trak), Cap Screw; 1/2" X 2", Hs, Sae 8,, Cap Screw; 1/2"X2" (Sub For Ce14125), Cap Screw; 1/2" X 2", Cap Screw; 1/2" X 2" (B), (30") (38"), Cap Screw; 1/2" X 2" Tapered, Cap Screw; (Sub For N104293), Cap Screw; 1/2" X 2", (Hs, Sae 8), Cap Screw; 1/2" X 2" For Tapered Only, Cap Screw; 12.700 X 50.800 mm (1/2" X 2") (Hs, Sae 8), Cap Screw; 1/2 X 2", Cap Screw; 1/2" X 2" With Air Conditioning (Pulley Safety Washer To Fan Spacer), Cap Screw; 1/2" X 2", (Use With R71696), Cap Screw; Hs, Sae 8, 1/2" X 2", Cap Screw; 1/2" X 2" (Hs, Sae 8), Cap Screw; 1/2" X 2", Hs, Sae 8, Cap Screw; 1/2"X2", Cap Screw; 1/2" X 2", (540 Rpm Only), Cap Screw; 1/2" X 2', Cap Screw; (B) 1/2" X 2", Cap Screw; 1/2" X 2", Hs Sae 8, Cap Screw; 1/2" X 2" (Hs, Sae 8) (Diesel), Cap Screw; (W/Al38671), Cap Screw; 12.700 X 50.800 mm, Cap Screw; 1/2" X 2" (8 Used, Less Spout-Trak)(6 Used, With Spout-Trak), Cap Screw, Cap Screw; 12.700 X 50.800 mm (1/2" X 2")	2
19***31	Cap Screw; 3/8" X 2-1/2", Lower, Cap Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; (D) 3/8" X 2-1/2" (Hs, Sae 8) (28'-7" Through 32'-1"), Cap Screw; 3/8" X 2-1/2" (Up), Cap Screw; (Sub For E39787), Cap Screw; 3/8" X 2-1/2" Sub For 19h268, Cap Screw; 3/8" X 2-1/2" (For Re500934), Cap Screw; 3/8" X 2-1/2" Lh, Cap Screw; 3/8" X 2-1/2" Low, Cap Screw; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", Low, Cap Screw; 3/8" X 2-1/2" (Sub For Mg280259), Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Re57603), Cap Screw; 3/8" X 2-1/2" (Sae 8), Cap Screw; 3/8" X 2-1/2" (34 Harvester), Cap Screw; 3/8" X 2-1/2" (Use With Re31973 And R42729), Cap Screw; 3/8"-16uncx2-1/2" (Ord T15634, 19h3631), Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8) (Use With T20315), Cap Screw; 3/8" X 2-1/2" Sae 8, Cap Screw; 3/8" X 2-1/2" Lower, Cap Screw; (B) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 2-1/2", (Sub For Mg280259) Hex Head, Cap Screw; 3/8" X 2-1/2" (Upper), Cap Screw; 3/8" X 2-1/2", (Manual), Cap Screw; 3/8" X 2-1/2" (Use With Ar91662), Cap Screw; (A) 3/8" X 2-1/2", Cap Screw; 3/8" X 1-5/8", Cap Screw; 3/8" X 2-1/2" Sae 8 Low, Cap Screw; 3/8" X 2-1/2" 3/8" X 2 1/2", Cap Screw; (A) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 2-1/2", (Use With N260835), Cap Screw; 3/8" X 2-1/2" Lks., Cap Screw; 3/8" X 2-1/2", (Sae 8), Cap Screw; 3/8" X 2-1/2" Pe3029dkv55, Cap Screw; (A: Included In Ae48634) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Ar91662), Cap Screw; 3/8" X 2-1/2", (Code 6212), Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -6900)) 3/8" X 2-1/2", Cap Screw; (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8" X 2-1/2", Cap Screw; X 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Re30685), Cap Screw; 3/8" X 2-1/2" Pe3029tkv50, Cap Screw; 3/8" X 2-1/2", (Use With Ar97707), Cap Screw; 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" (Sae 8), Front, Cap Screw; 3/8" X 2-1/2" (Sub For 19h268)Up, Cap Screw; 3/8"X2-1/2", For 3179dl016, Cap Screw; 9.525 X 63.500 mm (3/8" X 2-1/2") Hs, Sae 8, Cap Screw; (Use With Dd12120), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8"X2-1/2" (For T54638, 14h1076) (Also Ord T15634), Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8) Low, Cap Screw; 3/8" X 2-1/2", (Hd-G), Cap Screw; 3/8" X 2-1/2" Use With Ar91662, Cap Screw; 3/8" X 2-1/2" 3/8" X 2-1/2", Cap Screw; 9.525 X 63.500 mm, Cap Screw; 3/8" X 2", (Sub For Mg280259) Hex Head, Grade 8, Cap Screw; 3/8" X 2-1/2", (Up), Cap Screw; 3/8"X1-5/8", Cap Screw; 3/8"X2-1/2", Cap Screw; 3/8" X 2-1/2" (For T54678, 14h1053) Ord 19h3631, T15634), Cap Screw; 3/8" X 2-1/2", (Use With Re31973 And R42729), Cap Screw; 3/8" X 2-1/2", (Upper), Cap Screw; 3/8" X 2-1/2", (Hs, Sae 8), Low, Cap Screw; 3/8" X 2-1/2", (Use With Re57603), Cap Screw; 3/8" X 2-1/2" Pe3029dkv54, Cap Screw; 3/8" X 2-1/2" Upper, Cap Screw; 9.525 X 63.500 mm (3/8" X 2-1/2"), Cap Screw; 3/8" X 2-1/2", Hs Sae 8, Cap Screw; (Use With R54986 And T20315), Cap Screw; 3/8" X 2-1/2" (Use With Re57603), Cap Screw; 3/8" X 2-1/2", Cap Screw; (B: Xxxxxx- 446(1168) 546(1129)) 3/8" X 2-1/2", Cap Screw; (A: 9550 ( -6900) 9550sh ( -69*00)) 3/8" X 2-1/2", Cap Screw; (B) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" Pe3029dkv50, Cap Screw; 3/8" X 2-1/2", (Also Order N10215), Cap Screw; 3/8" X 2-1/2" Sub For 19h268, Up, Cap Screw; 3/8" X 2-1/2", Hs, Sae 8, Cap Screw, Cap Screw; 3/8" X 2-1/2", (Upper), Cap Screw; 3/8" X 2-1/2" (Use With T20315)(Hs, Sae 8), Cap Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 2-1/2" Used W/L.H. Gauge Wheel, Cap Screw; 3/8" X 2-1/2" Pe3029tkv51, Cap Screw; 3/8" X 2-1/2" Use With Re30685	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Long Tongue (4053 Mm - 159 9/16")

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***62	Screw; 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", 6- Bottom 406 mm (16") Plow, Screw; (A) 3/4"X2-1/2", Screw; 3/4" X 2-1/2", Lh, Screw; 3/4" X 2-1/2" (Safety Chain), Screw; 3/4" X 2-1/2", (44 Series Tractor), Screw; 3/4" X 2-1/2" (Use With 14h794), Screw; (B: With Front Weight Bracket) 3/4" X 2-1/2" (4050, 4055, 4250, 4255, 4450, 4455, 4640 Tractors), Screw; 19.050 X 63.500 mm (3/4" X 2-1/2"), Screw; 3/4" X 2-1/2" Torque = 407 Nm (300 Lb.Ft.), Screw; 3/4" X 2-1/2" (20'9"-22'2"), Screw; 3/4" X 2-1/2" (37'10"), Screw, Screw; 3/4"X2-1/2" Up, Screw; 3/4" X 2-1/2" (B), Screw; 3/4" X 2-1/2" (28'7"-35'6"), Screw; 3/4" X 2-1/2", (Upper), Screw; (A) 3/4" X 2-1/2", (Use With R49630), Screw; 3/4"X2-1/2", Screw; (A: Used With Tow-Between Cart) 3/4" X 2-1/2", Screw; (C) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", (For Rear Holes), Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2" (16'5"-18'3"), Screw; (A) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", (Hi-Crop), Screw; (B) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", For Bfa Or Bfa Spring-Tooth, Screw; (H: Hydraulic Fold Only.) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", (Rear Holes), Screw; 3/4"X2-1/2", Up, Screw; 3/4" X 2-1/2" (Hs, Sae 8), Screw; 3/4" X 2-1/2", (Use With R49630), Screw; 19.050 X 63.500 mm	2
19***73	Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", Hs Sae 8, Bolt; 1/2" X 1-3/4" (Sae 8), Bolt; 1/2"X1-3/4", Bolt; 1/2"X1-3/4", (For 3179dl005), Bolt; 1/2" X 1-3/4", 118 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4", 115 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4" Sae 8, Bolt; 1/2"X1-3/4" (For 3179dl014), Bolt; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Hs, Sae 8), Bolt; 1/2"X1-3/4" (For 3179dl005), Bolt, Bolt, Bolt; 1/2"X1-3/4", For 3179dl013, Bolt; 1/2" X 1-3/4", (Use With Cd16045), Bolt; 1/2" X 1-3/4", (Hs Sae 8), Bolt; 12.700 X 44.450 mm, Bolt; 1/2" X 1-3/4", Hs, Sae 8, Bolt; 1/2"X1-3/4", For 3179dl015, Cap Screw; 1/2" X 1-3/4", (Torque 120 Lb/Ft), Bolt; (1503) Hs, Sae 8, 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 1/2" X 1-3/4", Hs, Sae 8, Bolt; 1/2" X 1-3/4", (Lower), Bolt; 1/2" X 1-3/4" Hs, Sae 8, Bolt; 1/2"X1-3/4" (For Cd16045), Bolt; 1/2" X 1-3/4" 1/2"X1-3/4", Bolt; 1/2"X1-3/4", (For 3179dl014), Bolt; 1/2" X 1-3/4", Cap Screw; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (Dh-01, Dh-03, Gh-01, Ha-D), Bolt; 1/2" X 1-3/4" 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (Sae 8), Bolt; 1/2" X 1-3/4", (Hs, Sae 8), Bolt; 1/2"X1-3/4", For 3179dl014, Bolt; 1/2"X1-3/4"(3"X8"), . Bolt, Bolt; 1/2"X1-3/4" (For R109086), Bolt; 1/2"X1-3/4", For 3179dl007, Bolt; 1/2" X 1-3/4", Hs, Sae 8; 6-Btm. Only, Bolt; (A) (B) 12.700 X 44.450 mm (1/2" X 1-3/4"), Bolt; 1/2" X 1-3/4", (Hs, Sae 8) For 100 mm X 180 mm (4- X 7-Inch) Or 125 mm X 180 mm (5- X 7-Inch) Toolbar, Bolt; Hs, Sae 8, 1/2" X 1-3/4", Bolt; Hs, Sae 8, 1/2" X 1-3/4" (Used With Single Selective Control Valve), Bolt; 1/2"X1-3/4", For 3179dl004, Bolt; 1/2" X 1-3/4" (A) (B), Bolt; 1/2" X 1-3/4", 120 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4" (Ord Cd16045), Bolt; 1/2" X 1-3/4" (Hs, Sae 8) Use W/Felt Spacer, Bolt; 1/2"X1-3/4" (Sub For 19h1777), Bolt; 1/2" X 1-3/4" (Sub For M121686), Bolt; 1/2"X1-3/4" (Ord Cd16045), Bolt; 1/2"X1-3/4", For 3179dl016, Bolt; (B) (C) 1/2" X 1-3/4", Bolt; 1/2"X1-3/4", For 3179dl005, Bolt; (Sae 8), Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (For Cd16045), Bolt; (A) 1/2" X 1-3/4", Bolt; 1/2"X1-3/4" (Ord R109086), Bolt; 1/2"X1-3/4", For 3179dl001, Bolt; 1/2" X 1-3/4" Full Thread	1
19***65	Cap Screw; 3/8" X 2" Rh, Cap Screw; (A) (B) (C) 3/8" X 2", Cap Screw; 3/8" X 2" Hs, Sae 8, (Less Cab), Cap Screw; 3/8"X2", Cap Screw, Cap Screw; 3/8" X 2" (For R100727), Cap Screw; 3/8" X 2", (Sub For T20204 And R107734), Cap Screw; 3/8" X 2" (Sub For 19h255), Cap Screw; 3/8" X 2" (Sae 8) , Up, Cap Screw; 3/8" X 2", (Code 6201), Cap Screw; 3/8" X 2", (Use With Ar91662), Cap Screw; 3/8" X 2", Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -6900)) 3/8" X 2", Cap Screw; 3/8" X 2" Low, Lh, Cap Screw; 3/8" X 2" Hs, Sae 8, Cap Screw; (C) 3/8"X2", Cap Screw; 3/8" X 2" Sae 8, Cap Screw; (A), Cap Screw; 3/8" X 2", Cap Screw; 9.525 X 50.800 mm, (Sae 8), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 2" (Hs, Sae 8), Cap Screw; (A) (B) 3/8" X 2", Cap Screw; 3/8" X 2" (Sae 8), Up, Cap Screw; (A: Right Front Side Hole) 3/8" X 2", Cap Screw; 9.525 X 50.800 mm, Cap Screw; 3/8" X 2", Unf., Cap Screw; (A) 3/8"X2", Cap Screw; (A: 9550 ( -6900) 9550sh ( -69070) 3/8" X 2", Cap Screw; 3/8" X 2" (For 30, 32 And 40, 42 Ft), Cap Screw; 3/8" X 2", (6201), Cap Screw; 3/8" X 2" (Sub For 19h3267), Cap Screw; 3/8" X 2", Right Front Side Hole, Cap Screw; 3/8" X 2" (675b), Cap Screw; (B) 3/8" X 2", Cap Screw; 3/8" X 2", Code 2102 And 2108, Cap Screw; 3/8" X 2", (Code 2102), Cap Screw; 3/8" X 2", (Sub For T73548, This Application), Cap Screw; (B), Cap Screw; 3/8" X 2", (Sub For 19h3217, This Application), Cap Screw; (A) 3/8" X 2", (Use With R100727), Cap Screw; 3/8" X 2", (40 Used, 1217;65 Used, 1219), Cap Screw; 3/8" X 2", (3.7 M (12-Ft.) 22 Used Per Tooth Bar) (4.3 M (14-Ft.) 27 Used Per Tooth Bar) (5.0 M (16-Ft.) 30 Used Per Tooth Bar), Cap Screw; (B: Engine Pe3029tkv53 (260 High Flow)) 3/8" X 2", Cap Screw; 3/8" X 2", (Use With Ar97707), Cap Screw; 3/8" X 2", (6215), Cap Screw; 3/8" X 2", (Code 2320), Cap Screw; (A: For 9650 ( -7080) & 9750 ( -7028)) 3/8" X 2", Cap Screw; 3/8" X 2" Hs, Sae 8, (With Cab), Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 2", Cap Screw; 3/8" X 2" Sae 8; Up, Cap Screw; 3/8" X 2" (Hs, Sae 8), Cap Screw; 3/8"X2", For 3179dl016, Cap Screw; 3/8"X2", For 3179dl001, Cap Screw; 3/8" X 2", (Sae 8), Cap Screw; 3/8" X 2" (Sae 8) , Low, Lh, Cap Screw; (A: 5303 (0014- ), 5403 ( 0032- ), 5503 (0001- ).) 3/8" X 2" (Sub For 19h255), Cap Screw; 3/8" X 2" Sub For 19h255, Cap Screw; 3/8" X 2", (Use With R100682 This Application), Cap Screw; 3/8" X 2" (Dh-01, Dh-02) (Use When R56727 Has Been Installed), Cap Screw; 3/8" X 2", Up, Cap Screw; 3/8" X 2" -3/4", (Sae 8), Cap Screw; 3/8" X 2" Re., Cap Screw; 3/8" X 2", Unf, Cap Screw; 3/8" X 2", (Use With Re63295), Cap Screw; 3/8" X 2" (Use With Ar91662), Cap Screw; 3/8" X 2", Hs, Sae 8, Cap Screw; (A) 3/8" X 2" (Hs, Sae 8), Cap Screw; 3/8" X 2", (Sub For Mg29962), Cap Screw; 3/8" X 2" (Use With Re63295), Cap Screw; 3/8" X 2" 3/8"X2" (Sae 8), Cap Screw; 3/8" X 2", (10 Used,1217;13 Used,1219) Each Additional Tooth Bar, Cap Screw; (A: Separate Fertilizer Placement) 3/8" X 2", Cap Screw; 3/8" X 2" 3/8" X 2", Cap Screw; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 2", Cap Screw; (B) 3/8"X2", Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2", Cap Screw; 3/8" X 2" (Sae 8), Cap Screw; (A: 5045d(0075- ), 5055d(0019- ), 5045e(0074- ), 5055e(0075- ), 5065e(0002- ), 5075e(00*21- )) 3/8" X 2" Sub For 19h255, Cap Screw; (A) 3/8" X 2", Cap Screw; 3/8"X2	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Lower Feed Roll Pan

03***94	Bolt; (E: 1.8 M (72 In.)(6 Ft.)) 1/2" X 2-3/4", Bolt; 1/2" X 2-3/4" 10 Ft., Bolt; 1/2" X 2-3/4", Bolt; 1/2" X 2-3/4" (A)	2
03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	2
03***52	Bolt; 1/2" X 4" (A), Bolt; 1/2" X 4" Outside Only (7.60 X 15), Bolt; 1/2" X 4" (7.60 X 15) Outside Only, Bolt; 1/2" X 4", Bolt; 1/2" X 4", (For Transport Bracket)	2
19***17	Bolt; 3/8" X 1-3/4", (Low), Bolt, Bolt; 9.525 X 44.450 mm, Bolt; 3/8" X 1-3/4" (Use With Re63295), Bolt; 3/8" X 1-3/4" (Sae 8), Bolt; 3/8" X 1-3/4" (Engine Mounting), Cap Screw; (E) 3/8" X 1-3/4", Bolt; 3/8"X1-3/4", (Sub For 19h2633), Bolt; 3/8" X 1-3/4", Hs, Sae 8, Bolt; 3/8" X 1-3/4" (Low), Bolt; 3/8" X 1-3/4", (Sae 8), Bolt; 3/8" X 1-3/4" (Sub For 19h3693), Bolt; 3/8" X 1-3/4" Hs Sae 8, Bolt; 3/8"X1-3/4", Bolt; 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4" (Hs, Sae 8) Shear Bolt, Bolt; (Hs, Sae 8), Bolt; 3/8" X 1-3/4" Sub For 19h3065, Bolt; 3/8" X 1-3/4" Low, Bolt; 3/8" X 1-3/4", Low, Bolt; 3/8" X 1-3/4", (Lower), Bolt; 3/8" X 1-3/4", Code 3904, Cap Screw; 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4" (Use With R109859), Bolt; 3/8" X 1-3/4", Torque To 46 Lb-Ft (63 N-M), Bolt; 3/8" X 1-3/4", (Sub 19h3772, This Application), Bolt; 9.525 X 44.450 mm, (Low), Bolt; 3/8" X 1-3/4" (Use With 14h812), Bolt; 3/8" X 1-3/4" (Hs, Sae 8) (A), (B), Cap Screw; 3/8" X 1-3/4", (Lower), Bolt; 3/8" X 1-3/4", (Use With Re63295), Bolt; (K) 3/8" X 1-3/4" (Hs, Sae 8), Bolt; (Sub For 19h1800), Bolt; 3/8" X 1-3/4", Lower, Bolt; 3/8" X 1-3/4" (Sub For Ty7101, This Application), Bolt; 3/8" X 1-3/4" 3/8" X 1-3/4", Bolt; 9.525 X 44.450 mm (3/8" X 1-3/4"), Bolt; 3/8" X 1-3/4" Sub For 19m7179, Bolt; (A) 3/8" X 1-3/4" (Hs, Sae 8) (Sub For Mg9706689), Bolt; (A) 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4" (Sub For M121677), Bolt; 3/8" X 1-3/4" (Hs, Sae 8) Except Rear, Bolt; 3/8" X 1-3/4", (Lower Front), Bolt; 3/8" X 1-3/4", (Code 1202), Bolt; 3/8" X 1-3/4" (Lower), Bolt; 3/8" X 1-3/4" (Lower Front), Bolt; 3/8" X 1-3/4" (Hs, Sae 8), Bolt; 3/8" X 1-3/4" (A), Bolt; 3/8" X 1-3/4" Hs, Sae 8, Bolt; 3/8" X 1-3/4" (Sub 19h3772, This Application), Bolt; 3/8" X 1-3/4", (Sub For Ty7101, This Application)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Main Frame

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	2
08***22	Cap Screw; (B) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (Sub For Mg281036), Cap Screw; 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (12'-2" Through 15'-0") (10,000 Lb Chain), Cap Screw; 3/4"X7-1/2", Cap Screw; 3/4" X 7-1/2", (12'2" Through 15'0") (For 10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (For 12-Row), Cap Screw; 3/4" X 7-1/2", 5 X 7 Frame, Cap Screw; 3/4" X 7-1/2", (For 12 Row), Cap Screw; (C) 3/4" X 7-1/2", (Long Tongue), Cap Screw; (A) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (13'-10" Through 19'-10") (10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (Long Tongue), Cap Screw; 3/4" X 7-1/2" (Use On Tapered Spring), Cap Screw; 3/4" X 7-1/2" (5 X 7 Frame), Cap Screw; (C) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (For 5 X 7 Frame), Cap Screw; (D: For 5 X 7 Frame) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" R.H., Cap Screw; 3/4" X 7-1/2" (Long Tongue) (C)	1
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Short Tongue (3479 Mm - 137")

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***62	Screw; 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", 6- Bottom 406 mm (16") Plow, Screw; (A) 3/4"X2-1/2", Screw; 3/4" X 2-1/2", Lh, Screw; 3/4" X 2-1/2" (Safety Chain), Screw; 3/4" X 2-1/2", (44 Series Tractor), Screw; 3/4" X 2-1/2" (Use With 14h794), Screw; (B: With Front Weight Bracket) 3/4" X 2-1/2" (4050, 4055, 4250, 4255, 4450, 4455, 4640 Tractors), Screw; 19.050 X 63.500 mm (3/4" X 2-1/2"), Screw; 3/4" X 2-1/2" Torque = 407 Nm (300 Lb.Ft.), Screw; 3/4" X 2-1/2" (20'9"-22'2"), Screw; 3/4" X 2-1/2" (37'10"), Screw, Screw; 3/4"X2-1/2" Up, Screw; 3/4" X 2-1/2" (B), Screw; 3/4" X 2-1/2" (28'7"-35'6"), Screw; 3/4" X 2-1/2", (Upper), Screw; (A) 3/4" X 2-1/2", (Use With R49630), Screw; 3/4"X2-1/2", Screw; (A: Used With Tow-Between Cart) 3/4" X 2-1/2", Screw; (C) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", (For Rear Holes), Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2" (16'5"-18'3"), Screw; (A) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", (Hi-Crop), Screw; (B) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", For Bfa Or Bfa Spring-Tooth, Screw; (H: Hydraulic Fold Only.) 3/4" X 2-1/2", Screw; 3/4" X 2-1/2", (Rear Holes), Screw; 3/4"X2-1/2", Up, Screw; 3/4" X 2-1/2" (Hs, Sae 8), Screw; 3/4" X 2-1/2", (Use With R49630), Screw; 19.050 X 63.500 mm	2
19***73	Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", Hs Sae 8, Bolt; 1/2" X 1-3/4" (Sae 8), Bolt; 1/2"X1-3/4", Bolt; 1/2"X1-3/4", (For 3179dl005), Bolt; 1/2" X 1-3/4", 118 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4", 115 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4" Sae 8, Bolt; 1/2"X1-3/4" (For 3179dl014), Bolt; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Hs, Sae 8), Bolt; 1/2"X1-3/4" (For 3179dl005), Bolt, Bolt, Bolt; 1/2"X1-3/4", For 3179dl013, Bolt; 1/2" X 1-3/4", (Use With Cd16045), Bolt; 1/2" X 1-3/4", (Hs Sae 8), Bolt; 12.700 X 44.450 mm, Bolt; 1/2" X 1-3/4", Hs, Sae 8, Bolt; 1/2"X1-3/4", For 3179dl015, Cap Screw; 1/2" X 1-3/4", (Torque 120 Lb/Ft), Bolt; (1503) Hs, Sae 8, 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 1/2" X 1-3/4", Hs, Sae 8, Bolt; 1/2" X 1-3/4", (Lower), Bolt; 1/2" X 1-3/4" Hs, Sae 8, Bolt; 1/2"X1-3/4" (For Cd16045), Bolt; 1/2" X 1-3/4" 1/2"X1-3/4", Bolt; 1/2"X1-3/4", (For 3179dl014), Bolt; 1/2" X 1-3/4", Cap Screw; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (Dh-01, Dh-03, Gh-01, Ha-D), Bolt; 1/2" X 1-3/4" 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (Sae 8), Bolt; 1/2" X 1-3/4", (Hs, Sae 8), Bolt; 1/2"X1-3/4", For 3179dl014, Bolt; 1/2"X1-3/4"(3"X8"), . Bolt, Bolt; 1/2"X1-3/4" (For R109086), Bolt; 1/2"X1-3/4", For 3179dl007, Bolt; 1/2" X 1-3/4", Hs, Sae 8; 6-Btm. Only, Bolt; (A) (B) 12.700 X 44.450 mm (1/2" X 1-3/4"), Bolt; 1/2" X 1-3/4", (Hs, Sae 8) For 100 mm X 180 mm (4- X 7-Inch) Or 125 mm X 180 mm (5- X 7-Inch) Toolbar, Bolt; Hs, Sae 8, 1/2" X 1-3/4", Bolt; Hs, Sae 8, 1/2" X 1-3/4" (Used With Single Selective Control Valve), Bolt; 1/2"X1-3/4", For 3179dl004, Bolt; 1/2" X 1-3/4" (A) (B), Bolt; 1/2" X 1-3/4", 120 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4" (Ord Cd16045), Bolt; 1/2" X 1-3/4" (Hs, Sae 8) Use W/Felt Spacer, Bolt; 1/2"X1-3/4" (Sub For 19h1777), Bolt; 1/2" X 1-3/4" (Sub For M121686), Bolt; 1/2"X1-3/4" (Ord Cd16045), Bolt; 1/2"X1-3/4", For 3179dl016, Bolt; (B) (C) 1/2" X 1-3/4", Bolt; 1/2"X1-3/4", For 3179dl005, Bolt; (Sae 8), Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (For Cd16045), Bolt; (A) 1/2" X 1-3/4", Bolt; 1/2"X1-3/4" (Ord R109086), Bolt; 1/2"X1-3/4", For 3179dl001, Bolt; 1/2" X 1-3/4" Full Thread	1
19***65	Cap Screw; 3/8" X 2" Rh, Cap Screw; (A) (B) (C) 3/8" X 2", Cap Screw; 3/8" X 2" Hs, Sae 8, (Less Cab), Cap Screw; 3/8"X2", Cap Screw, Cap Screw; 3/8" X 2" (For R100727), Cap Screw; 3/8" X 2", (Sub For T20204 And R107734), Cap Screw; 3/8" X 2" (Sub For 19h255), Cap Screw; 3/8" X 2" (Sae 8) , Up, Cap Screw; 3/8" X 2", (Code 6201), Cap Screw; 3/8" X 2", (Use With Ar91662), Cap Screw; 3/8" X 2", Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -6900)) 3/8" X 2", Cap Screw; 3/8" X 2" Low, Lh, Cap Screw; 3/8" X 2" Hs, Sae 8, Cap Screw; (C) 3/8"X2", Cap Screw; 3/8" X 2" Sae 8, Cap Screw; (A), Cap Screw; 3/8" X 2", Cap Screw; 9.525 X 50.800 mm, (Sae 8), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 2" (Hs, Sae 8), Cap Screw; (A) (B) 3/8" X 2", Cap Screw; 3/8" X 2" (Sae 8), Up, Cap Screw; (A: Right Front Side Hole) 3/8" X 2", Cap Screw; 9.525 X 50.800 mm, Cap Screw; 3/8" X 2", Unf., Cap Screw; (A) 3/8"X2", Cap Screw; (A: 9550 ( -6900) 9550sh ( -69070) 3/8" X 2", Cap Screw; 3/8" X 2" (For 30, 32 And 40, 42 Ft), Cap Screw; 3/8" X 2", (6201), Cap Screw; 3/8" X 2" (Sub For 19h3267), Cap Screw; 3/8" X 2", Right Front Side Hole, Cap Screw; 3/8" X 2" (675b), Cap Screw; (B) 3/8" X 2", Cap Screw; 3/8" X 2", Code 2102 And 2108, Cap Screw; 3/8" X 2", (Code 2102), Cap Screw; 3/8" X 2", (Sub For T73548, This Application), Cap Screw; (B), Cap Screw; 3/8" X 2", (Sub For 19h3217, This Application), Cap Screw; (A) 3/8" X 2", (Use With R100727), Cap Screw; 3/8" X 2", (40 Used, 1217;65 Used, 1219), Cap Screw; 3/8" X 2", (3.7 M (12-Ft.) 22 Used Per Tooth Bar) (4.3 M (14-Ft.) 27 Used Per Tooth Bar) (5.0 M (16-Ft.) 30 Used Per Tooth Bar), Cap Screw; (B: Engine Pe3029tkv53 (260 High Flow)) 3/8" X 2", Cap Screw; 3/8" X 2", (Use With Ar97707), Cap Screw; 3/8" X 2", (6215), Cap Screw; 3/8" X 2", (Code 2320), Cap Screw; (A: For 9650 ( -7080) & 9750 ( -7028)) 3/8" X 2", Cap Screw; 3/8" X 2" Hs, Sae 8, (With Cab), Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 2", Cap Screw; 3/8" X 2" Sae 8; Up, Cap Screw; 3/8" X 2" (Hs, Sae 8), Cap Screw; 3/8"X2", For 3179dl016, Cap Screw; 3/8"X2", For 3179dl001, Cap Screw; 3/8" X 2", (Sae 8), Cap Screw; 3/8" X 2" (Sae 8) , Low, Lh, Cap Screw; (A: 5303 (0014- ), 5403 ( 0032- ), 5503 (0001- ).) 3/8" X 2" (Sub For 19h255), Cap Screw; 3/8" X 2" Sub For 19h255, Cap Screw; 3/8" X 2", (Use With R100682 This Application), Cap Screw; 3/8" X 2" (Dh-01, Dh-02) (Use When R56727 Has Been Installed), Cap Screw; 3/8" X 2", Up, Cap Screw; 3/8" X 2" -3/4", (Sae 8), Cap Screw; 3/8" X 2" Re., Cap Screw; 3/8" X 2", Unf, Cap Screw; 3/8" X 2", (Use With Re63295), Cap Screw; 3/8" X 2" (Use With Ar91662), Cap Screw; 3/8" X 2", Hs, Sae 8, Cap Screw; (A) 3/8" X 2" (Hs, Sae 8), Cap Screw; 3/8" X 2", (Sub For Mg29962), Cap Screw; 3/8" X 2" (Use With Re63295), Cap Screw; 3/8" X 2" 3/8"X2" (Sae 8), Cap Screw; 3/8" X 2", (10 Used,1217;13 Used,1219) Each Additional Tooth Bar, Cap Screw; (A: Separate Fertilizer Placement) 3/8" X 2", Cap Screw; 3/8" X 2" 3/8" X 2", Cap Screw; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 2", Cap Screw; (B) 3/8"X2", Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2", Cap Screw; 3/8" X 2" (Sae 8), Cap Screw; (A: 5045d(0075- ), 5055d(0019- ), 5045e(0074- ), 5055e(0075- ), 5065e(0002- ), 5075e(00*21- )) 3/8" X 2" Sub For 19h255, Cap Screw; (A) 3/8" X 2", Cap Screw; 3/8"X2	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Spout Transition

19***44	Cap Screw; 1/2" X 2-1/2" Hs, Sae 8, Cap Screw; 1/2" X 2-1/2", (Tube End), Cap Screw; 1/2" X 2-1/2", Hs Sae 8, Cap Screw; 1/2" X 2-1/2", (Use With H110290 Or H119210), Cap Screw; 1/2"X2-1/2", Cap Screw; (A: Power Shift Transmission) 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2", For 15'3" Harrow, Cap Screw; 1/2" X 2-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; 1/2"X2 1/2", Cap Screw; 1/2" X 2-1/2", Hs, Sae 8 (With Spout-Trak), Cap Screw; 12.700 X 63.500 mm, Cap Screw; 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2", Hs, Sae 8, Cap Screw; (B) (D) 1/2" X 2-1/2", Cap Screw; 1/2"X2-1/2", For 3179dl005, Cap Screw; 1/2"X2-1/2", For 3179dl001, Cap Screw; (A) 1/2"X2-1/2", Cap Screw; 1/2"X2"-1/2", Cap Screw; 1/2" X 2-1/2", (Sae 8), Cap Screw; 1/2" X 2-1/2" (Hs, Sae 8), Cap Screw; 1/2"X2-1/2", For 3179dl015, Cap Screw; 1/2" X 2-1/2", (Sub For T67810), Cap Screw; 1/2" X 2-1/2", L.H., Cap Screw; Hs, Sae 8, 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2", (Use With T20036), Cap Screw; 1/2" X 2-1/2" (Use With H110290 Or H119210), Cap Screw; 1/2"X2-1/2", For 3179dl014, Cap Screw; 1/2"X2-1/2", For 3179dl016, Cap Screw; 1/2" X 2-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 2-1/2" (With Spout-Trak), Cap Screw; (C) 1/2" X 2-1/2", Cap Screw; (A), Cap Screw, Cap Screw; 1/2" X 2-1/2" (Sub For Mg20987), Cap Screw; 1/2"X2-1/2", For 3179dl007, Cap Screw; (B) 1/2"X2-1/2", Cap Screw; (A) 1/2" X 2-1/2", Cap Screw; (D) 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2" (Sae 8), Cap Screw; 1/2" X 2-1/2" (44 Ft), Cap Screw; 1/2" X 2-1/2" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 2-1/2", R.H., Cap Screw; 1/2"X2-1/2" (For R109086), Cap Screw; (A) (C) 1/2" X 2-1/2", Cap Screw; 1/2" X 2-1/2", For 10' And 12' Harrows	2
19***64	Cap Screw; 5/16" X 3/4", (Without Alternator Shield), Cap Screw; (A) 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (Less Spout-Trak), Cap Screw; 5/16" X 3/4" (United Kingdom Only), Cap Screw, Cap Screw; 5/16" X 3/4" (With Mechanical Front Wheel Drive), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (3.7 M (12-Ft.) Platform Less Conditioner), Cap Screw; 5/16" X 3/4" (Hs, Sae 8), Cap Screw; 5/16" X 3/4", Cap Screw; 5/16" X 3/4" (30"), Cap Screw; 5/16" X 3/4", (Use Without Alternator Shield), Cap Screw; 5/16" X 3/4" Hs, Sae 8, Cap Screw; 5/16" X 3/4", Hs, Sae 8, Cap Screw; 5/16"X3/4", Cap Screw; 5/16" X 3/4", (Sub 19h1900), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (Sub For 19h1112), Cap Screw; 5/16" X 3/4", (Hs, Sae 8), Cap Screw; (A: For Engine (Cd6068hz001)) 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (Sae 8), Cap Screw; (A) (B) 5/16" X 3/4", Cap Screw; 5/16" X 3/4" (4 Used, 30") (10 Used, 38"), Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Cap Screw; 5/16" X 3/4" (Nla), Cap Screw; 5/16" X 3/4" (Sub E33233), Cap Screw; 7.925 X 19.050 mm, Cap Screw; 5/16" X 3/4", (Code 2912), Cap Screw; 5/16" X 3/4" (16 Used, 30") (15 Used, 38"), Cap Screw; 5/16" X 3/4" (Less Spout-Trak), Cap Screw; 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (3-Rrc), Cap Screw; 5/16" X 3/4", (Use With R108741), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (Sub For Et10723), Cap Screw; (D) 5/16" X 3/4" (Hs, Sae 8), Cap Screw; 5/16" X 3/4" (Sae 8)	2
19***35	Cap Screw; 1/2" X 2", Hs, Sae 8 (8 Used, Less Spout-Trak)(6 Used, With Spout-Trak), Cap Screw; 1/2" X 2", Hs, Sae 8,, Cap Screw; 1/2"X2" (Sub For Ce14125), Cap Screw; 1/2" X 2", Cap Screw; 1/2" X 2" (B), (30") (38"), Cap Screw; 1/2" X 2" Tapered, Cap Screw; (Sub For N104293), Cap Screw; 1/2" X 2", (Hs, Sae 8), Cap Screw; 1/2" X 2" For Tapered Only, Cap Screw; 12.700 X 50.800 mm (1/2" X 2") (Hs, Sae 8), Cap Screw; 1/2 X 2", Cap Screw; 1/2" X 2" With Air Conditioning (Pulley Safety Washer To Fan Spacer), Cap Screw; 1/2" X 2", (Use With R71696), Cap Screw; Hs, Sae 8, 1/2" X 2", Cap Screw; 1/2" X 2" (Hs, Sae 8), Cap Screw; 1/2" X 2", Hs, Sae 8, Cap Screw; 1/2"X2", Cap Screw; 1/2" X 2", (540 Rpm Only), Cap Screw; 1/2" X 2', Cap Screw; (B) 1/2" X 2", Cap Screw; 1/2" X 2", Hs Sae 8, Cap Screw; 1/2" X 2" (Hs, Sae 8) (Diesel), Cap Screw; (W/Al38671), Cap Screw; 12.700 X 50.800 mm, Cap Screw; 1/2" X 2" (8 Used, Less Spout-Trak)(6 Used, With Spout-Trak), Cap Screw, Cap Screw; 12.700 X 50.800 mm (1/2" X 2")	0
A5***11	Sign; (Danger), Sign; 6.1 M (20 Ft.) Only "Danger"; Located On Front, Sign; (C: Danger), Sign; 6.1 M (20 Ft.) Only, "Danger"; Located On Front, Sign; Danger-Electric Shock, Sign; (Sub For H136407) "Danger" - Located On Marker Wings, Sign; (F: Danger), Sign; (B: Danger), Sign; "Danger" - Located On Marker Wings, Sign; "Danger" - Located On Main Frame, Sign; 6.1 M (20 Ft.) "Danger"; Located On Front Of Drill, Sign; (D: Danger), Sign; "Danger", Sign; Danger - Electrical, Sign; (D: Danger) Danger, Sign, Sign; "Danger" - Located On Fold Down Markers, Sign; (A: Danger) (B: Located On Marker Wings)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Throat Filler Panels And Gatherer Crop Guide (3-Row Row-Crop) (762 Mm (30") (965 Mm (38")

03***68	Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)	4
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	3
24***64	Washer; 13/32" X 3/4" X 0,105", Washer; (A) (B) 13/32" X 3/4" X 7/64", Washer; 13/32" X 3/4" X 7/64" Nla, Washer; 13/32" X 3/4" X 7/64", Washer; .105"X 13/32"X3/4", Washer; 13/32" X 3/4" X 7/64", (With Iron-Gard), Washer; (A: Included In Ae48634) 13/32" X 3/4" X 7/64", Washer; 13/32" X 3/4" X 7/64" 6, 7, And 8 Series Balers Except 466, 467 468 And Otherwise Noted, Washer; (A: With Intelliguard) 13/32" X 3/4" X 7/64", Washer; 13/32" X 3/4" X 7/64" 3/4"X13/32"X.105", Washer; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 13/32" X 3/4" X 7/64" Not Used W/L.H. Gage Wheel, Washer; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 13/32" X 3/4" X 7/64" (36 Used, 335; 48 Used, 375), Washer, Washer; 13/32" X 3/4" X 7/64", Washer; 13/32" X 3/4" X 0,105" (Sub For 24m3762, Cc102897), Washer; 3/4"X13/32"X.105", Washer; 13/32" X 3/4" X 7/64", 5460 Model Only, Washer; 13/32" X 3/4" X 7/64" (36 Used, 435; 48 Used 535), Washer; 13/32" X 3/4" X 0.105", Washer; 13/32"X3/4"X.105", Washer; (A: Included In Ae48634) 13/32" X 3/4" X 7/64" Not Used W/L.H. Gage Wheel, Washer; 13/32" X 3/4" X 7/64" (336 And 346 Balers), Washer; 0.105"X13/32"X3/4", Washer; .105" X 13/32" X 3/4", Washer; 13/32" X 3/4" X 7/64" Not Used W/L.H. Gauge Wheel, Washer; (A) 13/32" X 3/4" X 7/64", Washer; 13/32" X 3/4" X .105", Washer; 3/4" X 13/32" X 0,105", Washer; 10,3mm, Washer; 13/32" X 3/4" X.105" (Sub For A1252e), Washer; (A) 3/4" X 13/32" X .105", Washer; .406" X .75" X .109", Washer; 10,3 mm, Washer; 3/4" X 13/32" X .105"	3
AE***73	Panel; L.H., Panel; Lh	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Tongue Powershaft And Hose Shields

03***95	Bolt; 3/8"X1-1/2", Bolt; 3/8"X1-1/2" (Sub For 03h1468), Bolt; 3/8" X 1-1/2" (Use With H127801), Bolt; 3/8" X 1-1/2", (22 Used On 18', 26 Used On 21' And 25' And 30 Used On 30'), Bolt; 3/8" X 1-1/2", (16 Used On 15' And 18', 20 Used On 21' And 25', 24 Used On 30'), Bolt; 3/8" X 1-1/2" (L.H. End - 4 Used; R.H. End - 2 Used, 1st And 4th Holes), Bolt; 3/8" X 1-1/2" (Rh), Bolt; 9.525 X 38.100 mm (3/8" X 1-1/2"), Bolt; 3/8" X 1-1/2", (40-Foot Boom), Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2" (Rigid), Bolt; 3/8" X 1-1/2" (Bolted Sections), Bolt; 3/8" X 1-1/2", (6 Used For 660, 8 Used For 680), Bolt; 3/8" X 1-1/2" Repair Kit, Bolt; 3/8"X1-1/2" (Sub For 03h1468 Appl), Bolt; 3/8" X 1-1/2" Lh, Bolt; 3/8" X 1-1/2", (Variable Drive)	2
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	3
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	2
19***27	Bolt; 5/16"X7/8", For 3179dl004, Bolt; 5/16" X 7/8" (Use With T30720), Bolt; (Code 6204), Bolt; 5/16" X 7/8", (Disk), Bolt; 5/16" X 7/8", (Use With R115500), Bolt; 5/16"X7/8", (Sub For 19h2117), Bolt; 5/16" X 7/8" (W/ (4) 12h303) (Sub For 19h2117), Bolt; 5/16" X 7/8" (Sub For 19h2117) (W/ (4) 12h303), Bolt; 5/16"X7/8", For 3179dl005, Bolt; (V) 5/16" X 7/8", Bolt; 5/16" X 7/8", (Grain, Corn And Bean), Bolt; 5/16"X7/8", Bolt; 5/16" X 7/8" (Use With 12h303 And 14h785), Bolt; 5/16"X7/8", For 3179dl015, Bolt; (B) 5/16" X 7/8", Bolt; (A: ( -Xxxxxx) 8560-00*90; 8760-0099; 8960-00**96) 5/16" X 7/8", Bolt; X 5/16" X 7/8", Bolt; X 5/16" X 7/8", Bolt; (A: Quantities Shown Are For One Unit. Three Units Used Per Machine.) 5/16" X 7/8" (Use With 12h303 And 14h785), Bolt; (A) 5/16"X7/8", Bolt; (Ou)5/16"X7/8", Bolt; 5/16"X7/8" (Ord W/ (4) 12h303) (Sub For 19h2117), Bolt; 5/16"X7/8" (Sub For 19h2117), Bolt; (C) 5/16" X 7/8", Bolt; 5/16" X 7/8", Includes Parts Marked (A), Bolt; (For R91405), Bolt; 5/16" X 7/8" (Sub Ar253740), Bolt; 5/16"X7/8" (For T30720, T30721), Bolt; 5/16" X 7/8" 5/16" X 7/8", Bolt; 5/16" X 7/8", For Re61095, Bolt; 5/16" X 7/8" (30") (38"), Bolt, Bolt; 5/16"X7/8", For 3179dl014, Bolt; (A) 5/16" X 7/8", Bolt; 5/16"X7/8", For 3179dl007, Bolt; (Use With R115500), Bolt; Ar 5/16"X7/8", Bolt; (Sub 19h1905, This Application), Bolt; 5/16" X 7/8" (Use Rh), Bolt; 7.925 X 22.225 mm (5/16" X 7/8"), Bolt; 5/16"X7/8, Bolt; 5/16"X7/8", For 3179dl016, Bolt; 5/16"X7/8", For 3179dl001, Bolt; 5/16"X7/8", For 3179dl013, Bolt; 5/16" X 7/8", (Code 2026), Bolt; 5/16" X 7/8", Bolt; 5/16" X 7/8" (Sub For M2136t, This Application), Bolt; 5/16" X 7/8", (600, 700 And 734 Hi-Cycles), Bolt; 7.925 X 22.225 mm, Bolt; 7.925 X 22.225 mm 5/16" X 7/8", Bolt; 5/16" X 7/8" (Use With 14h785), Bolt; 5/16" X 7/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 7/8", (Use With Ar59680), Bolt; Ar, 5/16"X7/8"	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Vertical Discharge Spout Extensions

14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2
19***93	Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69*00) 9550sh (-69*00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine	8
19***39	Bolt; 3/8" X 1-1/4" (Use With Standard Rasp Bars), Bolt; 3/8" X 1-1/4", (Sub For 19h1732), Bolt; 3/8" X 1-1/4" 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 9.525 X 31.750 mm, Bolt; 3/8 X 1-1/4", Bolt; 3/8" X 1-1/4" Sae 8, Bolt; 3/8" X 1-1/4" (1a), Bolt; 3/8" X 1-1/4" 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (12 Teeth) (Use With At20830), Bolt; 3/8" X 1-1/4", (Use With Re25890 And R94218) (Rear), Bolt; 3/8" X 1-1/4", (Sae 8), Bolt; 3/8"X1-1/4" (For L32670), Bolt; 3/8" X 1-1/4", (1 Used L.H.) (1 Used R.H.), Bolt; 3/8" X 1-1/4" (Hs, Head Marked 10.9), Bolt; 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8"X1-1/4", For 3179dl013, Bolt; (A: For 9650 Cts Combine (69*10- )) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1-1/4", Bolt; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (8.8), Bolt; 3/8"X1-1/4", For 3179dl016, Bolt; 3/8" X 1-1/4" (Use With R86007), Bolt; 3/8"X1-1/4", For 3179dl004, Bolt; 3/8"X1-1/4" (Ord 19h1731), Bolt; 3/8"X1-1/4", For 3179dl001, Cap Screw; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304) (Key 2, Page 15-7), Bolt; 3/8" X 1-1/4" (24 And 224 Balers), Bolt; (A: Included In Ae48634) 3/8" X 1-1/4" Not Used W/L.H. Gage Wheel, Bolt; (B) 3/8"X1-1/4", Bolt, Bolt; 3/8" X 1-1/4", Hs, Sae 8,, Bolt; 3/8" X 1-1/4" Torque To 36 Lb-Ft (49 N-M), Bolt; 3/8" X 1-1/4" (Use With Re501693 Or Re502196), Bolt; (A) 3/8"X1-1/4", Bolt; 3/8" X 1-1/4" (Sub For R53661), Bolt; 3/8"X1-1/4" (Sub For 19h1732), Bolt; Hd, Sae 8, 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With Ar87583 Or Ar102218), Bolt; 3/8" X 1-1/4", (Ea-D, De-01), Bolt; 3/8" X 1-1/4" (Use With Re25890 And R94218) (Rear), Bolt; 3/8" X 1-1/4", Code 2111, Bolt; 3/8" X 1-1/4", (Code 4100 Or 4199), Bolt; 3/8" X 1-1/4", Full Thread, Bolt; 3/8" X 1-1/4", (9139), Bolt; 3/8" X 1-1/4", (Sub For M1112t, This Application), Bolt; (C) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4", Torque To 36 Lb-Ft (49 N-M), Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates), Bolt; 3/8" X 1-1/4" With Air Conditioning, Bolt; 3/8" X 1-1/4", (Sub For F2273r, This Application), Bolt; Hs, Sae 8, 3/8" X 1-1/4", Bolt; (A) (B) (D) (E) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", R.H., Bolt; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1-1/4" 3/8"X1-1/4" (Sae 8), Bolt; 3/8" X 1-1/4", (Pickup Reel), Bolt; 3/8" X 1-1/4" (Sub For 19h1732), Bolt; 3/8" X 1-1/4", (Na-D, Dn-01), Bolt; 3/8" X 1-1/4" (Rear), Bolt; 3/8" X 1-1/4" Hs, Sae 8, Bolt; 3/8" X 1-1/4" (B), Bolt; 3/8" X 1-1/4" 3/8"X1-1/4", Bolt; 3/8" X 1-1/4" Hs Sae 8, Bolt; 3/8" X 1-1/4" (Sae 8), Front, Bolt; (A), Bolt; (B) 3/8" X 1-1/4", Bolt; (B) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4", (2512,9139), Bolt; (A) (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", Torque To 46 Lb-Ft (63 N-M), Bolt; 3/8" X 1-1/4", (Use With T142647), Bolt; 3/8" X 1-1/4", L.H., Bolt; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With Re502196), Bolt; 3/8"X1-3/4", Bolt; 3/8" X 1-1/4", (Use With Standard Rasp Bars), Bolt; 3/8" X 1-1/4", (3014), Bolt; 3/8" X 1-1/4", (Code 2111), Cap Screw, Bolt; 3/8" X 1-1/4", (8.8), Bolt; 3/8" X 1-1/4", (Use With 12h304), Bolt; 3/8" X 1-1/4" (Water Pump Inlet To Cover), Bolt; (B) (C) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4, Bolt; 3/8" X 1-1/4", (3006), Bolt; (A) 3/8"X1-1/4" (Marked L39906), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (10.9), Bolt; 3/8" X 1-1/4" (Sub For M1112t, This Application), Bolt; 3/8" X 1-1/4" Not Used With L.H. Gauge Wheel, Bolt; (Code 1304, 1320), Bolt; 3/8"X1-3/8", Bolt; (A: For 9650 Combine (6907- ) Also Serial Nos. 6994, 6995, 6901, 6902 And 69**05.) 3/8" X 1-1/4", Bolt; 3/8"X1-1/4", (For 3179dl016), Bolt; 3/8" X 1-1/4" (Sae 8), Bolt; 3/8" X 1-1/4" (Hs, Sae 8 ), Bolt; 3/8" X 1-1/4", (Code 1701, 1702 And 1703), Bolt; 3/8" X 1-1/4", (Bat Reel), Bolt; 3/8"X1-1/4", (For 3179dl001), Bolt; (B: W/O Cab) 3/8" X 1-1/4", Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", Hs, Sae 8, Bolt; 3/8" X 1-1/4", (Ha-D, Hb-D), Bolt; 3/8" X 1-1/4" (Hs, Sae 8) (Lower Holes), Bolt; (B) (C) 3/8" X 1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Hs, Sae 8) (Use With Re502196)	2
AE***36	Extension; (A) 254 mm (10"), Extension; (A), Extension; 25.4 cm (10") (Sub For Ae24180), Extension; 10", Extension; 254 mm (10"), Extension, Extension; 254 mm (10") (Sub For Ae24180), Extension; 25.4 cm (10")	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Frame : Wheel And Wheel Spindle

11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	2
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	8
14***75	Nut; 7/8", Slotted, Nut; 7/8", Use On Yoke With 7/8" Shaft, Nut; 7/8", Nut, Nut; (B) Lh, Nut; Lh, 7/8", Nut; L.H., Nut; 7/8" (Ref. 7/8") Lh, Nut; (F: Incld In Cb01488227 & Cb01488228 Tie Rod Groups) 7/8", Nut; 7/8" 7/8", Nut; 7/8" L.H., Nut; Sp, 7/8", Nut; 7/8", Slotted, L.H., Nut; 7/8" (A) (B), Nut; 7/8", L.H., Nut; 7/8", Unf, Nut; 7/8" Slotted, Titn To 250 Ft-Lb., Nut; (A: 8520 (02***33- )) 7/8", Nut; 7/8", For 610, Nut; 7/8", Unf,, Nut; 7/8" Slotted, Nut; 7/8", For 810, Nut; (B) 7/8", Nut; 7/8", Castellated, Nut; (A) 7/8", Slotted, Nut; 7/8", Slotted, Unf	2
19***63	Cap Screw; 3/4" X 2-1/8" For Use With Non-Kp Machines, Cap Screw; (A) 3/4" X 2-1/8", Cap Screw; (A) 3/4"X2-1/8", Cap Screw; 3/4" X 2-1/8", Cap Screw; 3/4"X2-1/8", Cap Screw; (B) 3/4"X2-1/8", Cap Screw; (A: No Extensions Used) 3/4" X 2-1/8" Use Qty (4) On Lh Side; (2) Top Rh Side - Without Kernel Processor, Cap Screw, Cap Screw; (A: No Extensions Used) 3/4" X 2-1/8" Use Qty (4) Each On Lh And Rh Side- Without Kernel Processor, Cap Screw; (A) 3/4" X 2-1/8", Use Qty 4 Each On L.H. And R.H. Side - Without Kernel Processor	0

See all parts with full part numbers in Heavy Parts AI →

Hydraulics

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Electrohydraulic Valve (With Tongue Swing)

AA***80	Piston; (D), Piston; (C), Piston, Piston; (Sub For Ae44089), Piston; (A: For Silage Special Machines), Piston; (A) (B), Piston; (A)	1
AE***68	Solenoid Valve; Header Lower, Solenoid Valve; Boom Lower, (Sub For Ae49604), Solenoid Valve; (Sub For Ae49604) , Boom Lower, Solenoid Valve; (Sub For Ae49604), Solenoid Valve; (Sub For Ae49604) Boom Raise, Solenoid Valve, Solenoid Valve; Boom Lower, (Sub For Ae49604) (Includes At124681, Aa37475 And At139434), Solenoid Valve; (Sub For Ae49604) (Includes At124681, Aa37475 And At139434) , Boom Lower, Solenoid Valve; (For Dc41576), Solenoid Valve; (A) (Sub For Ae49604), Solenoid Valve; (For Dc45722), Solenoid Valve; (A: For Soft Core)	1
AE***20	Valve; (Sub Ae73721)Complete	1
AE***95	Valve	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Electrohydraulic Valve (Without Tongue Swing)

AA***80	Piston; (D), Piston; (C), Piston, Piston; (Sub For Ae44089), Piston; (A: For Silage Special Machines), Piston; (A) (B), Piston; (A)	1
AE***68	Solenoid Valve; Header Lower, Solenoid Valve; Boom Lower, (Sub For Ae49604), Solenoid Valve; (Sub For Ae49604) , Boom Lower, Solenoid Valve; (Sub For Ae49604), Solenoid Valve; (Sub For Ae49604) Boom Raise, Solenoid Valve, Solenoid Valve; Boom Lower, (Sub For Ae49604) (Includes At124681, Aa37475 And At139434), Solenoid Valve; (Sub For Ae49604) (Includes At124681, Aa37475 And At139434) , Boom Lower, Solenoid Valve; (For Dc41576), Solenoid Valve; (A) (Sub For Ae49604), Solenoid Valve; (For Dc45722), Solenoid Valve; (A: For Soft Core)	1
AE***08	Valve; Complete	1
AE***95	Valve	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Electrohydraulic Valve Shield (With Intelliguard)

AE***02	Cover; (Sub For E130456) W/Decal	1
E9***68	Cover; (Sub E130456)	1
H7***31	Screw; (Sub For H81101), Screw; Self-Tapping Sub For H81101), Screw; (150 Per Cent Beater Speed) (Corn And Bean), Screw; 9.525 X 15.750 mm (3/8" X 0.620") Self-Tapping, Screw; Self-Tapping, Screw; (Sub For H81101), Self-Tapping, Screw; 3/8"X5/8", Screw; 3/8" X 0.620", Self Tapping, Screw; (150 Per Cent Beater Speed) (Grain And Rice), Screw; Self-Tappng, Screw; 9.525 X 15.750 mm (Use With 14h785) (Sub For H81101), Screw; 3/8", Screw; (150 Per Cent Beater Speed)(Grain And Rice), Screw; 3/8" X 0.620", Self-Tapping, Screw, Screw; 3/8" X 5/8", Screw; 3/8" X 0.620", Screw; 3/8", Self-Tapping, Screw; Tapping 3/8", Screw; Tapping, 3/8" X 5/8", Screw; 9.525 X 15.750 mm, Screw; Self Tapping, Screw; 9.525 X 15.750 mm (3/8" X 0.620")	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Electrohydraulic Valves Hydraulic Hoses And Fittings

22***19	Set Screw; 3/8" X 1-3/4" Use Loctite On Screws, Set Screw; 3/8" X 1-3/4"	1
AE***16	Hydraulic Hose	2
AR***22	Quick Coupler; (Sub For Ah15000), Quick Coupler; 3/4"-16 Unf, Quick Coupler; To No. 3 Scv, Quick Coupler; Male Coupler, Quick Coupler; 10 Male - Standard, Quick Coupler; (C), Quick Coupler; (A: Tractor Remote Cylinder Control Valve Operated Grapple) Iso, Quick Coupler; Iso 3/4"-16unf, Quick Coupler; (Illustrated), Quick Coupler; (To L.H. Port), Quick Coupler; Iso, 3/4"-16unf, Quick Coupler; Iso (Sub For An132283), Quick Coupler; (A: Required For Field Conversion To Independent Marker System), Quick Coupler; (A: To Pressure Coupler On Power Beyond) (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)), Quick Coupler; Two Per Assembly, Quick Coupler; Automatic Marker, Quick Coupler; (B: For 7000 Series Tractors), Quick Coupler; Male, (Sub For E73003), Quick Coupler; (A: 9550 (-69*00) 9550sh (-6900)), Quick Coupler; R.H., Quick Coupler; 3/4" Iso, Quick Coupler; (A: Standard Flow - Long Drawbar), Quick Coupler; (A), Quick Coupler; Iso Coupler For Automatic Marker, Quick Coupler; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.), Quick Coupler; Iso, L.H. Port, Quick Coupler; (B: Male) 3/4"-16unf, Iso, Quick Coupler; (Also Order Ah128241, T77814 And 38h1445), Quick Coupler; (A: For Connection To 22 Series Combines), Quick Coupler; (A: Isolated Open Operator Station) (B: With Cab) (C), Quick Coupler; Male, Quick Coupler; To Rh Port, Quick Coupler; (Sub For An132283), Quick Coupler; To Pressure Coupler On Power Beyond, Quick Coupler; (A) (Sub For Al26973), Quick Coupler; Independent Marker, Quick Coupler; "Iso" (Sub For Al26973), Quick Coupler; Iso Coupler, Quick Coupler; (A: Isolated Open Operator Station/With Cab), Quick Coupler; Iso, 3/4", Quick Coupler; (A: 9550 (6901-) 9550sh (69*01-)), Quick Coupler; (Sub For Aa23358), Quick Coupler; 3/4" 16 Unf, Quick Coupler; (B) Iso, 3/4"-16 Unf, Quick Coupler; For Automatic Marker, Quick Coupler; All Except 9000 Series Tractors, Quick Coupler; L.H. Port, Quick Coupler; (A) Male, Quick Coupler; (Sub For Ar30210) Iso Coupler, Quick Coupler; Complete, (Sub For Ar93819, R74242, R76477 And R76459), Quick Coupler; (Iso), Quick Coupler; 3/4"-16 Iso, Quick Coupler; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Quick Coupler; (Used On 492, 592, 692 And 892), Quick Coupler; (B: Male) Iso 3/4"-16 Unf, Quick Coupler; 4343mm (171") X 3/8", Quick Coupler; (Sub Aa40149), Quick Coupler; Iso, Quick Coupler; Iso, R.H. Port, Quick Coupler; Iso,3/4"-16unf, Quick Coupler; (B: Male) Iso, 3/4"-16 Unf, Quick Coupler; Iso Coupler For Independent Marker, Quick Coupler; (A: For 55 & 60 Series Tractors W/E-H Hitch), Quick Coupler; (Sub Ar94522), Quick Coupler; (B: Male) Iso, 3/4"-16unf, Quick Coupler; 3/4"-16unf Iso, Quick Coupler; (A: With Cab/Isolated Open Operator Station), Quick Coupler; Is0 Coupler, Quick Coupler; (Assembly), Quick Coupler; Half, Quick Coupler; (A), Male, Quick Coupler; (C: Standard Flow Long Drawbar), Quick Coupler; (A: All Except 9000 Series Tractors), Quick Coupler; L.H., Quick Coupler; (Sub For Al26971), Quick Coupler; 3/4", Quick Coupler; (A: Straddle Mount), Quick Coupler; (A: To Pressure Coupler On Power Beyond), Quick Coupler; 3/4" - 16unf Iso, Quick Coupler; (B: Male) 3/4"-16 Unf Iso, Quick Coupler; R.H. Port, Quick Coupler; For Independent Marker, Quick Coupler; 1/2" Fitting, Quick Coupler; (A) (B), Quick Coupler; Straight, Quick Coupler; (B: 8000 & 9000 Series Tractors), Quick Coupler; (Sub For Al26973), Quick Coupler; (B: Male) 3/4"-16 Unf Iso,, Quick Coupler; Iso Male, Quick Coupler; 3/4"-16unf Iso, 3/4"-16unf, Quick Coupler; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors), Quick Coupler; Complete, (Sub For Ar93820, R74242, R76777 And R76459), Quick Coupler; (A: Vacuum Pressure), Quick Coupler; (B), Quick Coupler; (3203 Tractor), Quick Coupler; Iso L.H. Port, Quick Coupler, Quick Coupler; Is0, Quick Coupler; (To R.H. Port), Quick Coupler; (B: Male) 3/4"-16unf Iso, Quick Coupler; Jam, Quick Coupler; (A: Pressure Coupler), Quick Coupler; Iso, 3/4" - 16unf, Quick Coupler; (B: Male) Iso 3/4"-16unf	2
H6***99	Union Fitting; (Sub For Am30686), Union Fitting; Adapter, Union Fitting; (K1) (K2) (K3) (Sub For T39220), Union Fitting, Union Fitting; (Sub For T39220), Union Fitting; 7/16" Male Jic X 7/16" Male O-Ring, Union Fitting; (Also Order R28782), Union Fitting; (Sub For Am30686) (Also Order R28782), Union Fitting; (Use With R28782) (Sub For Am30686 Or T39220)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Electrohydraulic Valves Unload Module (Base Module)

19***62	Cap Screw; 3/8" X 3-1/4", Cap Screw; 3/8" X 3-1/4", Full Thread, Cap Screw; 3/8" X 3-1/4", Full Thread (With Iron-Gard)	2
28***60	Spacer; (A: Included In Ae48634) 0.423" X 0.675" X 3/8", Spacer; (A) (B) 0.423" X 0.675" X 3/8", Spacer; 10.744 X 17.145 X 9.525 mm, Washer; 0.423" X 0.675" X 3/8", Spacer; Use With Drop Down Plate Only, Spacer; (A) 10,74 X 17,14 X 9,52 mm, Spacer; 0.423" X 0.675" X 3/8", (Use With E65476), Spacer; 3/8" X 3/8", Spacer; (A) 0.423" X 0.675" X 3/8", Washer; 10.744 X 17.145 X 9.525 mm (0.423" X 0.675" X 3/8") (Sub For T147074), Washer; (Sub For T147074), Spacer; 0.423" X 0.675" X 3/8", Spacer, Spacer; 10,74 X 17,14 X 9 52 mm, Spacer; (C) (D) 0.423" X 0.675" X 3/8", Spacer; 0.423" X 0.675" X 3/8" (A), Spacer; (B: Timing Gear Cover) 0.423" X 0.675" X 3/8", Spacer; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 0.423" X 0.675" X 3/8", Spacer; 0.423" X 0.675" X 3/8" 3/8" X 5/16", Spacer; 10,74 X 17,14 X 9,52 mm, Washer; 0.423" X 0.675" X 3/8", (Sub For T147074)	2
AA***75	Electrical Coil; (Remove Pin Contact Connector Body - This Application), Electrical Coil	1
AE***09	Valve	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Electrohydraulic Valve (With Tongue Swing) (310227 - )

AA***80	Piston; (D), Piston; (C), Piston, Piston; (Sub For Ae44089), Piston; (A: For Silage Special Machines), Piston; (A) (B), Piston; (A)	1
AE***68	Solenoid Valve; Header Lower, Solenoid Valve; Boom Lower, (Sub For Ae49604), Solenoid Valve; (Sub For Ae49604) , Boom Lower, Solenoid Valve; (Sub For Ae49604), Solenoid Valve; (Sub For Ae49604) Boom Raise, Solenoid Valve, Solenoid Valve; Boom Lower, (Sub For Ae49604) (Includes At124681, Aa37475 And At139434), Solenoid Valve; (Sub For Ae49604) (Includes At124681, Aa37475 And At139434) , Boom Lower, Solenoid Valve; (For Dc41576), Solenoid Valve; (A) (Sub For Ae49604), Solenoid Valve; (For Dc45722), Solenoid Valve; (A: For Soft Core)	1
AE***95	Valve	2
AE***33	Solenoid Valve; Header Raise, Solenoid Valve	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Feed Roll Gear Case Shift

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	1
11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	4
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	1
24***08	Screw; 13/32"X1x.134", Screw; 13/32" X 1" X 0.134", With Deflector, Screw; 13/32"X1"X.105", Screw; 13/32" X 1" X 0.134" (918, 920, 922, 925 And 930), Screw; 13/32" X 1" X 0.134" Not Included In Key 11, Screw; 13/32" X 1" X .134", Screw; 0.134"X13/32"X1", Screw; 13/32"X1"X0.134" (Sub For 24h1254 Appl), Screw; (A: Quad-Range Transmission) 13/32" X 1" X 0.134", Screw; 13/32" X 1" X 0.134" (Reg) Lh, Screw; (A) (B) 13/32" X 1" X 0.134", Screw, Screw; (A) 1" X 13/32" X .134", Screw; 3/8", Screw; Lh, Screw; 13/32" X 1" X 0.134" (Gasoline), Screw; Flat, 3/8", Screw; 13/32" X 1" X 0134", Screw; 13/32" X 1" X 0.134", (Reg) L.H., Screw; (A: For 28' Splice) 13/32" X 1" X 0.134", Screw; 13/32"X1"X.134", Screw; .134" X 13/32" X 1", Screw; 13/32" X 1" X 0.134" (336 And 346 Balers), Screw; 13/32" X 1" X 0.134", (Gas), Screw; 13/32" X 1" X 0.134", (Less Cab), Screw; 13/32" X 1" X 0.134", (2 On Upper 19h2007) (1 On Lower 19h2007), Screw; 13/32" X 1" X 0.134", (24 And 224 Balers), Screw; 13/32" X 1" X 0.134", Used On R.H. Side Only, Screw; 13/32" X 1" X 0.134", (Use With Standard Rasp Bars), Screw; 13/32" X 1" X 0.134" (Use With Ah161389, Ah161390, Ah161395, Ah161398 Or Ah161411), Screw; 10.312 X 25.400 X 3.404 mm, Screw; 13/32" X 1" X 0.134" With Deflector, Screw; 13/32"X1"X0.134", Screw; 13/32" X 1" X 0.134" (All Models Except 930 Flex Arg), Screw; 1" X 13/32" X .134", Screw; 13/32" X 1" X 0.134" L.H., Screw; 13/32" X 1" X 0.134", (Sub For (2) Mg34187), Screw; 13/32" X 1" X 0.134", (Bat Reel), Screw; 13/32" X 1" X 0.134", (Use With Ah161389, Ah161390, Ah161395, Ah161398 Or Ah161411), Screw; 13/32" X 1" X 0.134", (For Field Lamp Installation), Screw; 13/32" X 1" X 0.134" (Use With Standard Rasp Bars), Screw; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 13/32" X 1" X 0.134", Screw; 13/32" X 1" X 0.134" With Rasp Bar, Screw; 13/32" X 1" X 0.134", (Sub For (2) Mg285872), Screw; 13/32" X 1" X .134" (Sub For 24h1307), Screw; 13/32" X 1" X 0.134", (Use With 19h1901), Screw; 10,3 X 25,4 X 3,4 mm, Screw; 13/32" X 1" X 0.134", Screw; 13/32" X 1" X 0.134" Short Tooth Pickup, Screw; 13/32" X 1" X 0.134" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Screw; (C) (D) 13/32" X 1" X 0.134", Screw; 13/32" X 1" X 0.134" (24 And 224 Balers), Screw; (Sub For Mg34187), Screw; 13/32" X 1"X.105", Screw; 13/32" X 1" X 0.134", (336 And 346 Balers), Screw; (B: 24 And 224 Balers) 13/32" X 1" X 0.134", Screw; 13/32" X 1" X 0.134", (Used On Upper 19h2228), Screw; 13/32" X 1" X 0.134", (4 Used, Variable Drive; 6 Used, Long), Screw; 13/32" X 1" X 0,134", Screw; 13/32"11" X .134", Screw; 13/32" X 1" X 0.134" (On Upper (2) 19m7836) (On Lower (1) 19m7836), Screw; 13/32" X 1" X 0.134" (A), Screw; (A) .134" X 13/32" X 1", Screw; 13/32" X 1" X 0.134", (Per Wheel), Washer; 13/32" X 1" X 0.134", Screw; (B) 13/32" X 1" X .134" (Sub For 24h782), Screw; 13/32" X 1" X 0.134", (Manual), Screw; (A) 13/32" X 1" X 0.134", Screw; (A) 13/32" X 1" X .134", Screw; (A: Parts Not Used On Balers With Bale Trak Plus Monitor) 13/32" X 1" X 0.134", Screw; 13/32" X 1" X 0.134", Front Shaft Only, Screw; 13/32" X 1" X 0.134", (327, 336, 337, 346 And 347 Balers)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Feed Roll Gear Case Shift Hydraulic Cylinder

AE***51	Hydraulic Cylinder, Hydraulic Cylinder; (Sub Ah216150), Hydraulic Cylinder; (Sub Ah216150) See Also Steering Cylinder	2
AH***50	Hydraulic Cylinder	2
H1***82	Seal, Seal; (Use With Ah216150)	1
H2***26	Seal; (Use With Ah216150), Seal	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Hydraulic Tongue Positioner (Fifth Function Electro Hydro Valve)

11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	2
19***08	Cap Screw; 5/8" X 3", (Sae8), Cap Screw; 5/8" X 3", Cap Screw; 5/8" X 3" (Hs, Sae 8) Upper Holes (For 6359d Engine), Cap Screw; 5/8"X3"Unc, Cap Screw; 5/8"X3", Cap Screw; (Sub For L36489), Cap Screw; 5/8" X 3" Hs, Sae 8, Cap Screw; (A) Lh, 0,625" X 3,0", Cap Screw; 5/8" X 3" Front, Cap Screw; (B) 5/8" X 3", Hs, Sae 8, Cap Screw; 15.875 X 76.200 mm (5/8" X 3") (Sub For 19h1863) This Application Only, Cap Screw; 5/8" X 3", (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 3" Hs Sae 8, (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 3", R.H., Cap Screw; 5/8" X 3" (Hs, Sae 8) (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 3", (Hs, Sae 8) (Use With 18.4-38, 20.8-34 Or 23.1-30 Tires), Cap Screw; 5/8" X 3" (Use With 1-3/8" Drawbar), Cap Screw; Sub For A22780, Cap Screw; 5/8" X 3" (Hs, Sae 8), Cap Screw; (A: Range Shift Lever On L.H. Side And Gear Shift Lever On R.H. Side) 5/8" X 3" (Hs, Sae 8), Cap Screw; (C) 5/8" X 3", Hs, Sae 8, Cap Screw; 5/8" X 3", (Sub For 19h1890) This Application Only, Cap Screw; 5/8" X 3" (36 Ft And 44 Ft Main Frame Extension Hinge, Front Holes), Cap Screw; 15.875 X 76.200 mm (5/8" X 3"), Cap Screw; 5/8" X 3", L.H., Cap Screw; (A: Range Shift Lever On L.H. Side And Gear Shift Lever On R.H. Side) 5/8" X 3", Cap Screw; 5/8" X 3" (Used With Step), Cap Screw; 5/8" X 3" L.H., Cap Screw; 5/8" X 3", Hs, Sae 8	4
24***52	Washer; 1-1/32" X 1-3/4" X 0.105", L.H., Washer; (B: 2096cc (69*01-) 9550sh (6901- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; 1-1/32" X 1-3/4" X 0.105" L.H., Washer; 1-1/32"X1-3/4"X.105", Washer; 1-1/32" X 1-3/4" X 0.105" Standard Capacity Only, Washer; 1-1/32" X 1-3/4" X 0.105", (Sub For (4) Mg25769) (675), Washer; (A) 1,031" X 1,75" X 0,105", Washer; 26x44x2,6mm, Washer; (G) 1-1/32" X 1-3/4" X 0.105", Washer; (A) 26,1 X 44,45 X 2,66 mm, Washer; 1-1/32" X 1-3/4" X 0.105" Base End, Washer; 26.187 X 44.450 X 2.667 mm (1-1/32" X 1-3/4" X 0.105"), Washer; (A: Semi-Mount Rotary Cutter Only) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Sub For 24m7090, This Application), Washer; 1-1/32" X 1-3/4" X 0.105", Washer; (A: For 9650 (6901- ) & 9750 (69*01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; .105" X 1-1/32" X 1-3/4", Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; (G: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A) (B) 1.031" X 1.75" X 0.105", Washer; (A), Washer; 1-1/32" X 1-3/4" X 0.105" (Use With Ah213758), Washer; (A: Regular Duty) 1-1/32" X 1-3/4" X 0.105", Washer; 26.187 X 44.450 X 2.667 mm, Washer, Washer; (F: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (D: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A: For Msl) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X .105", Washer; (A) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105", 36 Ft And 42 Ft, Washer; 1-1/32" X 1-3/4" X 0.105", (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only	2
AE***69	Hydraulic Hose	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Hydraulic Tongue Positioner (Using Tractor Scv)

11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	1
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	1
19***08	Cap Screw; 5/8" X 3", (Sae8), Cap Screw; 5/8" X 3", Cap Screw; 5/8" X 3" (Hs, Sae 8) Upper Holes (For 6359d Engine), Cap Screw; 5/8"X3"Unc, Cap Screw; 5/8"X3", Cap Screw; (Sub For L36489), Cap Screw; 5/8" X 3" Hs, Sae 8, Cap Screw; (A) Lh, 0,625" X 3,0", Cap Screw; 5/8" X 3" Front, Cap Screw; (B) 5/8" X 3", Hs, Sae 8, Cap Screw; 15.875 X 76.200 mm (5/8" X 3") (Sub For 19h1863) This Application Only, Cap Screw; 5/8" X 3", (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 3" Hs Sae 8, (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 3", R.H., Cap Screw; 5/8" X 3" (Hs, Sae 8) (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 3", (Hs, Sae 8) (Use With 18.4-38, 20.8-34 Or 23.1-30 Tires), Cap Screw; 5/8" X 3" (Use With 1-3/8" Drawbar), Cap Screw; Sub For A22780, Cap Screw; 5/8" X 3" (Hs, Sae 8), Cap Screw; (A: Range Shift Lever On L.H. Side And Gear Shift Lever On R.H. Side) 5/8" X 3" (Hs, Sae 8), Cap Screw; (C) 5/8" X 3", Hs, Sae 8, Cap Screw; 5/8" X 3", (Sub For 19h1890) This Application Only, Cap Screw; 5/8" X 3" (36 Ft And 44 Ft Main Frame Extension Hinge, Front Holes), Cap Screw; 15.875 X 76.200 mm (5/8" X 3"), Cap Screw; 5/8" X 3", L.H., Cap Screw; (A: Range Shift Lever On L.H. Side And Gear Shift Lever On R.H. Side) 5/8" X 3", Cap Screw; 5/8" X 3" (Used With Step), Cap Screw; 5/8" X 3" L.H., Cap Screw; 5/8" X 3", Hs, Sae 8	4

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Harvesting Unit Lift Cylinder Lockout And Hydraulic Line

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	1
19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	1
19***05	Cap Screw; 3/4" X 5" (Use With An261330), Cap Screw; 3/4" X 5" (Use With An233314), Cap Screw; 3/4" X 5" (Hs, Sae 8), Cap Screw; 3/4" X 5" (F Grade), Cap Screw; 3/4" X 5", Cap Screw; 3/4"X5", Cap Screw; 3/4" X 5" Hs, Sae 8, Cap Screw; 3/4" X 5", Hs, Sae 8, Cap Screw; (B) 3/4" X 5" Hs, Sae 8, Inner, Cap Screw; 3/4" X 5" Torque To 280 Lb-Ft(380 N-M) Using Never Sieze On Threads, Cap Screw; 3/4" X 5" (Sub For 19h3210), Cap Screw; 3/4" X 5" (A), Cap Screw; 3/4" X 5" Incld In 1, 2, Cap Screw; (B) 3/4" X 5", Hs, Sae 8 Inner	2
19***39	Bolt; 3/8" X 1-1/4" (Use With Standard Rasp Bars), Bolt; 3/8" X 1-1/4", (Sub For 19h1732), Bolt; 3/8" X 1-1/4" 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 9.525 X 31.750 mm, Bolt; 3/8 X 1-1/4", Bolt; 3/8" X 1-1/4" Sae 8, Bolt; 3/8" X 1-1/4" (1a), Bolt; 3/8" X 1-1/4" 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (12 Teeth) (Use With At20830), Bolt; 3/8" X 1-1/4", (Use With Re25890 And R94218) (Rear), Bolt; 3/8" X 1-1/4", (Sae 8), Bolt; 3/8"X1-1/4" (For L32670), Bolt; 3/8" X 1-1/4", (1 Used L.H.) (1 Used R.H.), Bolt; 3/8" X 1-1/4" (Hs, Head Marked 10.9), Bolt; 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8"X1-1/4", For 3179dl013, Bolt; (A: For 9650 Cts Combine (69*10- )) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1-1/4", Bolt; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (8.8), Bolt; 3/8"X1-1/4", For 3179dl016, Bolt; 3/8" X 1-1/4" (Use With R86007), Bolt; 3/8"X1-1/4", For 3179dl004, Bolt; 3/8"X1-1/4" (Ord 19h1731), Bolt; 3/8"X1-1/4", For 3179dl001, Cap Screw; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304) (Key 2, Page 15-7), Bolt; 3/8" X 1-1/4" (24 And 224 Balers), Bolt; (A: Included In Ae48634) 3/8" X 1-1/4" Not Used W/L.H. Gage Wheel, Bolt; (B) 3/8"X1-1/4", Bolt, Bolt; 3/8" X 1-1/4", Hs, Sae 8,, Bolt; 3/8" X 1-1/4" Torque To 36 Lb-Ft (49 N-M), Bolt; 3/8" X 1-1/4" (Use With Re501693 Or Re502196), Bolt; (A) 3/8"X1-1/4", Bolt; 3/8" X 1-1/4" (Sub For R53661), Bolt; 3/8"X1-1/4" (Sub For 19h1732), Bolt; Hd, Sae 8, 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With Ar87583 Or Ar102218), Bolt; 3/8" X 1-1/4", (Ea-D, De-01), Bolt; 3/8" X 1-1/4" (Use With Re25890 And R94218) (Rear), Bolt; 3/8" X 1-1/4", Code 2111, Bolt; 3/8" X 1-1/4", (Code 4100 Or 4199), Bolt; 3/8" X 1-1/4", Full Thread, Bolt; 3/8" X 1-1/4", (9139), Bolt; 3/8" X 1-1/4", (Sub For M1112t, This Application), Bolt; (C) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4", Torque To 36 Lb-Ft (49 N-M), Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates), Bolt; 3/8" X 1-1/4" With Air Conditioning, Bolt; 3/8" X 1-1/4", (Sub For F2273r, This Application), Bolt; Hs, Sae 8, 3/8" X 1-1/4", Bolt; (A) (B) (D) (E) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", R.H., Bolt; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1-1/4" 3/8"X1-1/4" (Sae 8), Bolt; 3/8" X 1-1/4", (Pickup Reel), Bolt; 3/8" X 1-1/4" (Sub For 19h1732), Bolt; 3/8" X 1-1/4", (Na-D, Dn-01), Bolt; 3/8" X 1-1/4" (Rear), Bolt; 3/8" X 1-1/4" Hs, Sae 8, Bolt; 3/8" X 1-1/4" (B), Bolt; 3/8" X 1-1/4" 3/8"X1-1/4", Bolt; 3/8" X 1-1/4" Hs Sae 8, Bolt; 3/8" X 1-1/4" (Sae 8), Front, Bolt; (A), Bolt; (B) 3/8" X 1-1/4", Bolt; (B) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4", (2512,9139), Bolt; (A) (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", Torque To 46 Lb-Ft (63 N-M), Bolt; 3/8" X 1-1/4", (Use With T142647), Bolt; 3/8" X 1-1/4", L.H., Bolt; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With Re502196), Bolt; 3/8"X1-3/4", Bolt; 3/8" X 1-1/4", (Use With Standard Rasp Bars), Bolt; 3/8" X 1-1/4", (3014), Bolt; 3/8" X 1-1/4", (Code 2111), Cap Screw, Bolt; 3/8" X 1-1/4", (8.8), Bolt; 3/8" X 1-1/4", (Use With 12h304), Bolt; 3/8" X 1-1/4" (Water Pump Inlet To Cover), Bolt; (B) (C) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4, Bolt; 3/8" X 1-1/4", (3006), Bolt; (A) 3/8"X1-1/4" (Marked L39906), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (10.9), Bolt; 3/8" X 1-1/4" (Sub For M1112t, This Application), Bolt; 3/8" X 1-1/4" Not Used With L.H. Gauge Wheel, Bolt; (Code 1304, 1320), Bolt; 3/8"X1-3/8", Bolt; (A: For 9650 Combine (6907- ) Also Serial Nos. 6994, 6995, 6901, 6902 And 69**05.) 3/8" X 1-1/4", Bolt; 3/8"X1-1/4", (For 3179dl016), Bolt; 3/8" X 1-1/4" (Sae 8), Bolt; 3/8" X 1-1/4" (Hs, Sae 8 ), Bolt; 3/8" X 1-1/4", (Code 1701, 1702 And 1703), Bolt; 3/8" X 1-1/4", (Bat Reel), Bolt; 3/8"X1-1/4", (For 3179dl001), Bolt; (B: W/O Cab) 3/8" X 1-1/4", Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", Hs, Sae 8, Bolt; 3/8" X 1-1/4", (Ha-D, Hb-D), Bolt; 3/8" X 1-1/4" (Hs, Sae 8) (Lower Holes), Bolt; (B) (C) 3/8" X 1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Hs, Sae 8) (Use With Re502196)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Harvesting Unit Lift Cylinders

AE***62	Hydraulic Cylinder; (Sub Ah217789), Hydraulic Cylinder, Hydraulic Cylinder; 2", (Sub Ah217789) Includes Parts Marked (B), Hydraulic Cylinder; (Sub Ah217789) Includes Parts Marked (A)	1
AE***30	Seal Kit; Lift Cylinder Service (Includes Parts Marked (A)), Seal Kit; (Use With Ae37062) (A), Seal Kit, Seal Kit; Lift Cylinder, Seal Kit; (Use With Ae37062), Seal Kit; (Use With Ae48917), Seal Kit; (B) (Use With Ae37062), Seal Kit; Cylinder Kit (Slave)	1
AH***31	Hydraulic Cylinder K, Hydraulic Cylinder K; 50 mm, Hydraulic Cylinder K; (Includes Parts Marked (A)), Hydraulic Cylinder K; Header Lift, Hydraulic Cylinder K; Header Lift, (Use With Ah160493), Hydraulic Cylinder K; Incl Keys Marked (A), Hydraulic Cylinder K; Header Lift Hyrdaulic Cylinder, Hydraulic Cylinder K; (Use With Ah217789) 50mm, Hydraulic Cylinder K; (Use With Ah217789), Hydraulic Cylinder K; 50mm (Use With Ah217789), Hydraulic Cylinder K; (Use With Ah160493), Hydraulic Cylinder K; 50mm (2")	1
AH***89	Hydraulic Cylinder; (Sub For Ae37062), Hydraulic Cylinder	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Reverse Drive Hydraulic Spout Motor

2***5	Shaft Key; 1/4" X 1", (Code 1304, 1317, 1319, 1320), Shaft Key; (Sub F3620015), Shaft Key, Shaft Key; 1/4" X 1" (Use With Re42675), Shaft Key; 1/4" X 1", (Mechanical Reel Drive), Shaft Key; 1/4"X1", Shaft Key; 1/4" X 1" (Use With Re42675, R63451 Or R56979), Shaft Key; 1/4" X 1", (Use With R63451, Re42675, R40740, R56979 Or R56934), Shaft Key; 1/4" X 1", (Use With R63451, Re42675, R40740, R56979 Or R56934) (Early Design Crankshaft), Shaft Key; 1/4" X 1", (Use With R56979, R63451 Or Re42675), Shaft Key; 1/4" X 1" (Use With Re53203, Re42675 Or Rg3451), Shaft Key; (A) (B) (C), Shaft Key; 1/4" X 1", (Use With Re42675 Or R63451), Shaft Key; 1/4" X 1", (Use With R63451 Or Re42675), Shaft Key; 1/4" X 1" 1/4" X 1", Shaft Key; 1/4" X 1" (Sub For 26h22) Woodruff, Shaft Key; (A: 12 Speed) 1/4" X 1", Shaft Key; 1/4" X 1" (Use With R87544), Shaft Key; 1/4" X 1" 1/4" X 1" (For Re41821), Shaft Key; 1/4" X 1" (For Re41821), Shaft Key; 1/4"X1" (Order W/ Re42675,R56979, R63451), Shaft Key; 1/4" X 1", (Use With R63451, Re42675, R40740 Or R56934), Shaft Key; (Use With Ar74624, Ar96189 Or Re42671), Shaft Key; 1/4" X 1" (Use Withre42675 Or R63451), Shaft Key; (Sub For 26h22), Shaft Key; 1/4" X 1", (Sub For Na3700), Shaft Key; 1/4" X 1", (Use With Re41821), Shaft Key; 1/4" X 1", (Use With Re41821) (Damper), Shaft Key; 1/4" X 1", (Used With Code 1309 And 1333), Shaft Key; 1/4" X 1", (Use With R87544), Shaft Key; 1/4" X 1", (Use With Re42675, R63451 Or R56979), Shaft Key; 1/4" X 1", (Use With Re53203, Re42675 Or Rg3451), Shaft Key; 1/4" X 1", Shaft Key; 1/4" X 1", (Use With R87544, R63451 Or Re42675), Shaft Key; 1/4" X 1" (Use With R63451, Re42675, R40740, R56979 Or R56934), Shaft Key; 1/4" X 1", (Used With Code 1303 And 4100), Shaft Key; 1/4" X 1", (1300 Codes), Shaft Key; 1/4" X 1" (Sub For 26h22), Shaft Key; 6.350 X 25.400 mm, (Use With Ah140127), Shaft Key; 1/4" X 1" (Use With Re41821), Shaft Key; 1/4" X 1" (Use With Re42675 Or R63451), Shaft Key; 1/4" X 1", (Use With R63451, R40740, R56979 Or R56934), Shaft Key; 1/4"X1" (Order W/ Re42675, R56979, R63451), Shaft Key; 1/4" X 1" (Use With Ah140127), Shaft Key; (Sub For F3620015), Shaft Key; 1/4" X 1" (Sub For W36275), Shaft Key; 6.350 X 25.400 mm (1/4" X 1"), Shaft Key; 1/4" X 1" (Use With R56979, R63451 Or Re42675), Shaft Key; 1/4" X 1" (Use With Re41821)(Damper), Shaft Key; 1/4" X 1" (Sub For Z78293), Shaft Key; 1/4" X 1" (Use With R63451 Or Re42675), Shaft Key; 1/4" X 1" (Use With Ar74624, Ar96189 Or Re42671), Shaft Key; 1/4" X 1", (Used With Code 1316 And 1327), Shaft Key; 1/4" X 1", (Use With Re42675, R56979 Or R63451)	1
AE***73	Motor; (Includes Woodruff Key) (Sub For Ae32550), Motor, Motor; (Sub For Ae32550), Motor; (Sub For N170846), Motor; (Sub Az47091 Appl) (Ord W/ R28782, 38h1309, 38h1005, Az47621, T77613, T77857, R46414), Motor; (Sub For Ae37071)	1
AE***74	Kit; Includes Parts Marked (B), Kit, Kit; Incl.Keys 15,17, Kit; Kit Incl Keys 15,17, Kit; Kit,Incl Keys 15,17, Kit; (Sub For Ae34519) (Matched Set), Kit; Kit, Incl Keys 15,17	1
AT***68	Seal Kit; (Use On 009 Series Motors), Seal Kit; Repair (Eaton Or Char-Lynn 003), Seal Kit, Seal Kit; Repair (Eaton Or Char-Lynn 003) Includes Parts Marked (B), Seal Kit; (Use On An142719), Seal Kit; Motor, Seal Kit; Also Includes Keys 17, 20 And 24, Seal Kit; (Use With An142719), Seal Kit; (Use On An142719 Motor, Seal Kit; (Use On An142719 Motor), Seal Kit; (Includes Keys Marked (A)), Seal Kit; Includes Parts Marked (A), Seal Kit; Kit (For Ae48173), Seal Kit; Seal, (For Char-Lynn Model 007), Seal Kit; Repair, Seal Kit; Repair (Char-Lynn Model 007)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Spout Cap Tilt And Wagon Hitch Release Hydraulic Cylinder Hoses

AE***86	Seal Kit; (Use With Ae48497), Seal Kit; Incl Keys 1,3-5,7,8 (Sub For Ae38735)	1
AE***07	Hydraulic Hose	2
AE***83	Hydraulic Cylinder; (Also Order (2) Ae48496) (Sub For Ae48497 And Ae38126), Hydraulic Cylinder; (Also Order (2) Ae48496) (Sub For Ae48497), Hydraulic Cylinder; (Sub For Ae30991, Ae38126 Or Ae48497) (Also Order (2) Ae48496), Hydraulic Cylinder; (Sub For Ae48497, This Application), Hydraulic Cylinder; (Sub For Ae48497), Hydraulic Cylinder; (Sub For Ae48497 Or Ae38126) (Also Order (2) Ae48496), Hydraulic Cylinder; (Sub For Ae54307 ) (Also Order Ae73582), Hydraulic Cylinder; (Also Order (2) Ae48496) (Sub For Ae48497 Or Ae38126), Hydraulic Cylinder; (Also Order (2) Ae48496 ) (Sub For Ae48497), Hydraulic Cylinder; (Sub For Ae48497 And Ae38126) (Also Order (2) Ae48496), Hydraulic Cylinder; (Sub For Ae54307) (Also Order Ae73582), Hydraulic Cylinder	1
AE***37	Seal Kit, Seal Kit; (Use With Ae70983)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Spout Rotation Hydraulic Motor Hoses And Fittings

AE***73	Motor; (Includes Woodruff Key) (Sub For Ae32550), Motor, Motor; (Sub For Ae32550), Motor; (Sub For N170846), Motor; (Sub Az47091 Appl) (Ord W/ R28782, 38h1309, 38h1005, Az47621, T77613, T77857, R46414), Motor; (Sub For Ae37071)	1
AE***10	Hydraulic Hose	2
AH***69	Elbow Fitting; 90° Swivel, Elbow Fitting, Elbow Fitting; Rod End Of Cylinder, Elbow Fitting, Elbow Fitting; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)), Elbow Fitting; 7/16" Male Jic X 7/16" Female Jic Swivel, Elbow Fitting; 90°, Swivel, Elbow Fitting; 90°, Elbow Fitting; (Eaton), Elbow Fitting; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.)	2
AH***90	Clamp; (Outside Units), Clamp; (1 In.), Clamp; (A: For Prodrive), Clamp; (Sub For R45211, This Application), Clamp; (A: 9550 ( -69*00) 9550sh ( -6900)), Clamp; "J" 1.00", Clamp; 1" Dia., Clamp; European Community, Clamp; (Not Illustrated), Clamp; "J" 1.00, Clamp; (B), Clamp; (A) (B), Clamp; Id= 25.4 mm, Clamp, Clamp; Id = 25.4 mm, Clamp; Impeller, Clamp; (Sub For T38377, This Application), Clamp; Nla, Clamp; (Sub For H171998), Clamp; (467s Only), Clamp; (A: For 9650 ( -6900) & 9750 ( -69*00)), Clamp; 466s Only, Clamp; Cushioned	3

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Spout Rotation Hydraulic Motor Support

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	2
19***84	Cap Screw; 3/8" X 7/8" (Also Order (2) 24h1305), Cap Screw; 3/8" X 7/8", (Dry Type Air Cleaner), Cap Screw; 3/8" X 7/8" (Rear), Cap Screw; (C) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (2501), Cap Screw; 3/8" X 7/8", Up, Cap Screw; 3/8"X7/8" (Sub For 19h1732), Cap Screw; 3/8" X 7/8", (Lower) (Power Shift), Cap Screw; 3/8" X 7/8" (For R122196), Cap Screw; 9.525 X 22.225 mm, Cap Screw; 3/8"X7/8" Appl, Cap Screw; 3/8"X7/8", (Sub For 19h1732), Cap Screw; 3/8" X 7/8" (Sub T53268, This Application), Cap Screw; 3/8" X 7/8" (Use With Re33058), Cap Screw; (B: (Xxxxxx-) 4555-01*00; 4755-0101; 4955-0149) 3/8" X 7/8", Cap Screw; 3/8" X 7/8" (Use With R62371), Cap Screw; (A), Cap Screw; (B: (Xxxxxx-) Esn 4650-3215; 4850-3246) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", 8650 Tractor, Cap Screw; 3/8" X 7/8" Radiator Support, Cap Screw; 3/8" X 7/8", (Ru And Or), Cap Screw; 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Ea-6), Cap Screw; 3/8" X 7/8", (Na-6, Gn-01), Cap Screw; 3/8" X 7/8", (Use With Re19268 And Re33058), Cap Screw; 3/8" X 7/8" Front Frame, Cap Screw; 3/8" X 7/8" (Use With Re63295), Cap Screw; 3/8" X 7/8", (Use With Ar87024 Or Ar87023), Cap Screw; 3/8" X 7/8", Cap Screw; (A: (-Xxxxxx) 4650-0177; 4850-01**15) 3/8" X 7/8", Cap Screw; 3/8" X 7/8" (Use With 14h812), Cap Screw; 3/8" X 7/8" (Rg),. Bolt, Cap Screw; 3/8" X 7/8" (Use With 12h304 And 14h812), Cap Screw; (A) 3/8" X 7/8", Cap Screw; (A) (B) 3/8" X 7/8", Cap Screw; 3/8"X7/8" (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (9 Used Diesel) (6 Used Gasoline), Cap Screw; 3/8" X 7/8", (Dn-02), Cap Screw; (B) 3/8"X7/8", Cap Screw; 3/8" X 7/8" (Sub At48506), Cap Screw; 3/8" X 7/8" (Less Power Take-Off), Cap Screw; 3/8" X 7/8" (4050), Cap Screw; 3/8" X 7/8", (Use With Re46821), Cap Screw; 3/8"X7/8" (Sub For 19h1732, 19h2245), Cap Screw; 3/8" X 7/8" Use With Ar91662, Cap Screw; 3/8" X 7/8", (Code 2909), Cap Screw; 3/8" X 7/8" Up, Cap Screw; 3/8"X7/8" (Sub For 19h1731), Cap Screw; 3/8" X 7/8", (Use With R62371), Cap Screw; 3/8" X 7/8", (Sub T53268, This Application), Cap Screw; (A: 75cc) 3/8" X 7/8", Cap Screw; 5/16"X1", Cap Screw; 3/8" X 7/8", (Use With R100259), Cap Screw; (Fan Pulley To Hub), Cap Screw; 3/8" X 7/8" (Use With 12h304), Cap Screw; 3/8" X 7/8", (2501,9177), Cap Screw; 3/8" X 7/8" (Sub For 19h1648, This Application), Cap Screw; 3/8" X 7/8", (Oil Bath Air Cleaner), Cap Screw; 3/8" X 7/8", (Diesel), Cap Screw; (D) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Upper), Cap Screw; 3/8" X 7/8", (Use With Re63295), Cap Screw; 3/8" X 7/8", (Gasoline And Lp-Gas), Cap Screw; 3/8"X7/8" (Sub For At20727), Cap Screw; 3/8" X 7/8", (Row-Crop And Standard) (2 Used Hi-Crop), Cap Screw; 3/8" X 7/8" (Use With R100259), Cap Screw; 3/8" X 7/8", (To Upper Rh Thermostat Housing) 6216, Cap Screw; 3/8" X 7/8", (Ru, Rc), Cap Screw; 3/8"X7/8", Cap Screw; 3/8" X 7/8" (5460, 5820, 8630, 8640, 8650), Cap Screw; 3/8" X 7/8", (Ea-D, Ea-G, De-01, Ge-01), Cap Screw; 3/8" X 7/8", (Use With Re33058), Cap Screw; 3/8" X 7/8", (5400), Cap Screw; (A) 3/8"X 7/8", Cap Screw; 3/8"X7/8" (Ord 19h1731), Cap Screw; (A) 3/8"X7/8", Mechanical Front Wheel Drive, Cap Screw; (B: Engine Serial No.) 3/8" X 7/8", Cap Screw; 3/8"X7/8" (W/ At19509), Cap Screw; (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (Motorola), Cap Screw; (B) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", Code 2306 And 2307, Cap Screw; (Lu) (Orchard Fenders), Cap Screw; 3/8"X7/8" (For Ce15214), Cap Screw; 3/8" X 7/8" (Front), Cap Screw; 3/8" X 7/8", (Orchard Fenders), Cap Screw; 3/8"X4", Cap Screw; (Orchard Fenders), Cap Screw; 3/8" X 7/8", (Use With Re33058), Cap Screw; 3/8" X 7/8" (Dn-03, Nb-D), Cap Screw; 3/8" X 7/8", Code 2310, Cap Screw; 3/8" X 7/8", (Use With R81911) Code 2501 And 2503, Cap Screw; 3/8" X 7/8", (Use Wite Re20982), Cap Screw; 3/8"X7/8" (For Al39725), Cap Screw; 3/8" X 7/8" 3/8" X 7/8", Cap Screw; X 3/2" X 7/8", Cap Screw; 3/8" X 7/8" (Use With Re55714), Cap Screw; 3/8" X 7/8" 3/8"X7/8", Cap Screw; (A) 3/8"X7/8", Cap Screw; 3/4" X 3/4", Cap Screw; 3/8" X 7/8", (Use With Re19265), Cap Screw; 3/8" X 7/8" (Use With R122196), Cap Screw; 3/8" X 7/8", (9 Used (A)) (6 Used (B)), Cap Screw; 3/8"X5/8", Cap Screw; (Use With Ar87023 Or Ar87024), Cap Screw; 3/8" X 7/8", (Use With Re33058 Re19268 And Ar66398), Cap Screw; 3/8"X7/8" (For At19509), Cap Screw; 3/8" X 7/8", (Use With Re30427), Cap Screw; (B: For 75cc Hydrostatic Pump) 3/8" X 7/8", Cap Screw; 9.525 X 22.225 mm (3/8" X 7/8"), Cap Screw, Cap Screw; 3/8" X 7/8", (Use With Ar77343), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Use With Ar91662), Cap Screw; 3/8" X 7/8", (Use With Re20982), Cap Screw; Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 7/8" (Long), Cap Screw; 3/8" X 7/8", (Code 2819), Cap Screw; 3/8" X 7/8" (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (Na-D, Na-G, Dn-01, Gn-01), Cap Screw; 3/8" X 7/8", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8" X 7/8", (Power Shift), Cap Screw; 3/8" X 7/8" (Use With Re19268 And Re33058), Bolt, Cap Screw; 3/8" X 7/8", (Use With Ar87023 Or Ar87024), Cap Screw; 3/8" X 7/8" (For Al39725), Cap Screw; 3/8" X 7/8", (Rs, Ut, Or, Rus), Cap Screw; (A) (B) (C) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", Not Used This Application	4
19***93	Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69*00) 9550sh (-69*00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine	1
24***50	Washer; 17/32" X 1-1/4" X 0.180" (213-3 Used; 215 And 216-4 Used; 218-5 Used; 220, 222, And 224-6 Used; 230-9 Used), Washer; 17/32" X 1-1/4" X 0.180" (913-3 Used; 915-4 Used; 918-5 Used; 920, 922, And 924-6 Used; 925-7 Used; 930-9 Used), Washer; (A: With Net Wrapping) 17/32" X 1-1/4" X 0.180", Washer; 17/32" X 1-1/4" X 0.180", R.H., Washer; (A) 17/32" X 1-1/4" X 0.180", Washer; 17/32" X 1-1/4" X 0.180", (8 Nominal), Washer; 17/32" X 1-1/4" X 0.180" (45), Washer; .180"X 17/32"X1-1/4", Washer; 17/32" X 1-1/4" X 0.180" R.H., Long Tooth Pickup, Washer; 17/32" X 1-1/4" X 0.180", (Mega), Washer; 17/32" X 1-1/4" X 0.180" (694), Washer; 17/32" X 1-1/4" X .180", Washer; 17/32" X 1-1/4" X 0.180" (Lh Only), Washer; 17/32" X 1-1/4" X 0.180" (3 Used With Corn Head; 4 Used With Cutting Platform), Washer; 17/32" X 1-1/4" X 0,180", Washer; 17/32" X 1-1/4" X 0.180" (Use With Axe15284), Washer; 17/32"X1-1/4", Washer; 17/32" X 1-1/4" X 0.180" R.H., Washer; 17/32" X 1-1/4" X 0.180" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 17/32" X 1-1/4" X 0.180" (Mega), Washer; 17/32" X 1-1/4" X 0.180", Washer, Washer; 17/32"X1-1/4"X.180", Washer; X, Washer; (A: Note; 9550 (70*01- ) 9550sh (70*01- )) 17/32" X 1-1/4" X 0.180", Washer; 17/32" X 1-1/4" X 0.180", L.H. Only, Washer; 17/32" X 1-1/4" X 0.180" (A), Washer; (B) 17/32" X 1-1/4" X.180", Washer; 17/32" X 1-1/4" X 0.180", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 17/32x1-1/4", Washer; 17/32"X1-1/4"X0.180", Washer; 17/32" X 1-1/4" X 0.180" (Special), Washer; 17/32" X 1-1/4" X 0.180" (894 And 1293), Washer; 17/32" X 1-1/4" X 0.180", (Use With Ae46504), Washer; (A) 13.487 X 31.750 X 4.572 mm (17/32" X 1-1/4" X 0.180")	4

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Hydraulics : Tongue Positioning Cylinder

12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	4
A4***66	End; (B: Items Included In Ae42001), End; Rear, End, End; (Use With An240670), End; (B)	1
A4***69	Piston; (B: Items Included In Ae42001), Piston, Piston; (B)	1
AE***60	Hydraulic Cylinder B; (B), Hydraulic Cylinder B; (B: Items Included In Ae42001)	1

See all parts with full part numbers in Heavy Parts AI →

Miscellaneous

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Decal Kit (English)

A5***11	Sign; (Danger), Sign; 6.1 M (20 Ft.) Only "Danger"; Located On Front, Sign; (C: Danger), Sign; 6.1 M (20 Ft.) Only, "Danger"; Located On Front, Sign; Danger-Electric Shock, Sign; (Sub For H136407) "Danger" - Located On Marker Wings, Sign; (F: Danger), Sign; (B: Danger), Sign; "Danger" - Located On Marker Wings, Sign; "Danger" - Located On Main Frame, Sign; 6.1 M (20 Ft.) "Danger"; Located On Front Of Drill, Sign; (D: Danger), Sign; "Danger", Sign; Danger - Electrical, Sign; (D: Danger) Danger, Sign, Sign; "Danger" - Located On Fold Down Markers, Sign; (A: Danger) (B: Located On Marker Wings)	1
AE***48	Decal Kit	1
AE***54	Instructions; Operator Instruction Card	1
E9***10	Decals; Model Number	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Decal Kit (English) - Continued

AE***48	Decal Kit	2
E8***26	Label; Power Take-Off Hookup At Powershaft And Pedestal, (Sub For E62868), Label; Power Take-Off Hookup At Powershaft And Pedestal Shield, (Sub For E62868), Label; Power Take-Off Hookup At Powerhft And Pedestal Shield, Label; Power Take-Off Hookup At Powershaft And Pedestal Shield	1
E8***14	Label; (3 Used On Integral; 4 Used On Pull-Type) (Sub For E74026) (Sub P57547, This Application), Label; (D: Driveshaft), Label; Danger-"Entanglement In Rotating Driveline.", Label; Danger - Entanglement (Sub For E74026), Label; Danger - Entanglement, (Sub For E74026), Label; (See Codes 11 And 14 Pages 39 And 37), Label; (Driveline Entanglement), Label; (A) (B), Label; (B), Label; "Danger" (Driveshaft) (Sub For E74026), Label; Drive Line Entang., Label; (Lift-Type, Pull-Type And Semi-Mount), Label; (Sub For E74026) Drive-Line Entanglement, Label; (A) (B) (Sub For E74026) "Danger" (Drive Shaft) (Sidehill Only), Label; (B: English) (A), Label, Label; (Sub For E74026) (Sub (3) P57547, This Application), Label; (1 Used On Integral) (2 Used On Center Pull-Type) (3 Used On Offset Pull-Type) (Sub For E74026) (Sub P57547, This Application), Label; (Sub For E74026) (Danger: Driveline Entanglement), Label; (B: For North America (English) Only), Label; Rotating Driveline Shields, (Sub For E74026), Label; Danger - Driveline Entanglement (See Decal Kit) (Sub For E74026), Label; Danger Driveline Entanglement, (Sub For E74026), Label; (A: English), Label; Danger - Rotating Parts, Label; (Sub For M117095), Label; (Drive Line Entanglement) (Sidehill Only), Label; (Offset), Label; "Danger" Drive Line Entanglement - On Back Shaft Drive Line Bearing Shield (494 - 1 Used On Rh Shield; 693, 694, 893, 894 And 1293 - 2 Used), Label; (Outside Of Each Wing U-Joint Shield; Top Of Splitter Gear Case Shield; Outside Of Each Driveline Shield) (Sub (3) P57547, This Application), Label; Driveline Entangl., Label; (Outside Driveline Shield) (Not Used On Truck Mixer), Label; (On Hitch Of Pull-Type) (On Gear Case Support Of Integral) (Sub For E74026), Label; 18', 418.5mm (Sub For E74026), Label; (A) (Sub For E74026), Label; ("Danger") (Sidehill/Contour Master), Label; Danger,"Entanglement In Rotating Driveline", Plate Rh, Label; (Sub For E74026), Label; Danger-Drive Line Entanglement, Label; Danger - Drive Line Entanglement, Label; (Driveline Entanglement) (Sub For E74026), Label; (Drive Line Entang.), Label; Danger-"Entanglement In Rotating Driveline..", Label; (On Hitch Of Pull-Type; On Gear Case Support Of Integral) (Sub For E74026), Label; Danger - "Entanglement In Rotating Driveline...", Label; Lubrication, Label; Drive Line Entang, Label; Danger - Rotating Parts, (Sub For E74026), Label; Danger-Drive Line Entanglement (Roll), Label; (Outside Of Each Wing U-Joint Shield; Top Of Splitter Gear Case Shield), Label; English, Label; (A: For 540 Rpm) (B: For 1000 Rpm), Label; (L.H. Frame Near Front) (Sub For E74026), Label; "Danger" (Drive Shaft) (Sub For E74026), Label; (Sub P57547, This Application) (Shown), Label; (A), Label; "Caution" Drive Line Entanglement - On Back Shaft Drive Line Bearing Shield, Label; "Danger" (Drive Line Entanglement) (Sidehill Only), Label; Danger - Driveline Entanglement, (Sub For E74026), Label; Danger-Driveline Entanglement, (Sub For E74026), Label; (B), (C), Label; "Danger" (Sub For E74026), Label; Danger (Drive Line Entanglement), Label; Drive Line Entanglement, Label; "Danger", Label; Drive Line Entanglement, (Sub For E74026), Label; (A: Category 3) (B: Category 4), Label; Danger (Rotating Driveline), Label; (B) Drive Line Entang., Label; Danger - Entanglement, Label; (A: For North America (English) Only), Label; Danger - Drive Line Entanglement, (Sub For E74026), Label; Driveline Entanglement, (Sub For M117095), Label; Danger - Driveline Entanglement, Label; (Sub P57547, This Application), Label; (Sub For E74026) (Danger: Power Take-Off Entanglement), Label; Danger (Rotating Driveline) (Sub For M117095), Label; (Sub For E74026) Driveline Entanglement, Label; (Sub For E74026) (Sub P57547, This Application), Label; Danger, (Sub For E74026), Label; Danger-"Entanglement In Rotating Driveline", Label; Driveline Entanglement, (Sub For E74026), Label; (A: For 540 Rpm (Ball Joint)) (B: For 1000 Rpm (Ball Joint)), Label; (Sub For E74026) Danger - Entanglement, Label; Driveline Entanglement, Label; (Sub For E74026) Danger, Label; Danger (Driveline Entanglement), Label; (Drive Line Entanglement), Label; (Sub For E74026) Drive Line Entanglement	2
E8***02	Label; (Sub For Jd5439), Label; Warning-1000 Rpm, (Sub For Jd5439), Label; (Warning: Operate With 1000 Rpm) (Sub For Jd5439), Label; "1000 Rpm" (For Power Shaft Shield, L.H. Side) (Sub For Jd5439), Label; Warning - 1000 Rpm, (Sub For Jd5439), Label; Warning-1000 Rpm - Power Take-Off, (Sub For Jd5439), Label; Warning, 1000 Rpm, Label; Warning - 1000 Rpm - Power Take-Off, (Sub For Jd5439), Label; Warning - Power Take-Off, (Sub For Jd5439), Label; 1000 Rpm, (Sub For Jd5439), Label; (A) Warning (1000 Rpm) (See Decal Kit, Domestic) (Sub For Jd5439), Label; 1000 Rpm Power Take-Off, Warning, Label, Label; Warning - Power Take-Off, Label; 1000 Rpm Power Take-Off Warning, (Sub For Jd5439), Label; (Warning Power Take-Off), (A), Label; (A) (Sub For Jd5439) (Warning Power Take-Off)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Decal Kit (French)

AE***47	Decal Kit	1
AE***56	Instructions; Operator Instruction Card	1
E8***13	Label; (B: French Label Kit), Label; (Sub For E74076) Drive Line Entanglement, Label; (A: French), Label; Danger - Drive Line Entanglement (Sub For E74076), Label; Driveline Entanglement (French-Canadian) (Sub For E74076), Label; Driveline Entanglement (French), Label; (Sub For E74076) Danger, Label; (A) "Danger" Drive Line Entanglement (French), Label; Danger - Driveline Entanglement, Plate Lh, Label; Danger, (Sub For E74076), Label; Danger (Power Take-Off), Label; Danger - Rotating Parts, (Sub For E74076), Label; Danger - Rotating Parts, Label; Danger (Driveline Entanglement), Label; (Sub For E74076) Danger - Drive Line Entanglement, Label; (French), Label; Driveline Entanglement, Label; Danger-Drive Line Entanglement (French), Label; Driveline Entanglement, (Sub For E74076), Label; French, Label; (Sub For E74076) Driveline Entanglement, Label; (B), Label, Label; Danger - Drive Line Entanglement (French), Label; Danger - Driveline Entanglment, Label; (Sub For E74076) French, Label; (A), Label; (A: Driveshaft), Label; Danger, Label; (Sub For E74076), Label; (A: For North America (French) Only), Label; Danger - Drive Line Entanglement, (Sub For E74076), Label; Drive Line Entanglement, Label; Danger: Entanglement, (Sub For E74076)	1
E8***75	Label; (Sub For Jd5127) 540 Rpm Power Take-Off, Label; Caution (French), (Sub For Jd5127), Label; Caution (French), Label; Separator, Label; (A), Label; Caution, (Sub For Jd5127), Label; (Sub For Jd5127) Safety, Label; Caution - Power Driven Parts, Label; (Caution) (French), Label; Caution (French) (Sub For Jd5127), Label; (B: French Label Kit), Label; (A: French), Label; Caution, Label; (A) French "Caution" Keep All Shields In Place, Label; (A: For North America (French) Only), Label, Label; French "Caution", (Sub For Jd5127), Label; (French) "Caution", Label; (B), Label; "Caution" (French), Label; Caution - Power Driven Parts, (Sub For Jd5127), Label; (Sub Jd5127), Label; (French), "Caution", Label; French, Label; Shield Warning (French), Label; (French), Label; (Sub For Jd5127), Label; Caution (Not In Kit) (Sub For Jd5127), Label; (French) "Caution", (Sub For Jd5127), Label; Attention, (Sub For Jd5127), Label; (Caution), Label; (B: French), Label; Caution - Shields, (Sub For Jd5127), Label; (Sub For Jd5127) Caution, Label; (B: France), Label; Caution - French	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Decal Kit (French) - Continued

AE***47	Decal Kit	1
E8***57	Label; (Sub For E63924), Label; Caution, Label; Caution, (Sub For E63924)	1
E8***94	Label; Feedroll Entanglement, (Sub For E74613), Label; Feedroll Entanglement, Label; (Sub For E74613) Feedroll Drive Entanglement, Label; (Sub For E74613) Stationary Operation	1
E8***68	Label; Danger - Electric Shock, Label; Caution - Electrical	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Decal Kit (Spanish)

AE***46	Decal Kit	1
E9***10	Decals; Model Number	1
E9***73	Decals, Decals; Intelliguard	2
E8***83	Label; Power Take-Off Hookup At Powerhft And Pedestal Shield, Label; Power Take-Off Hookup At Powershaft And Pedestal Shield	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Decal Kit (Spanish) - Continued

AE***46	Decal Kit	1
AE***55	Decals; Operator Instruction Card	1
E1***81	Label; Spanish, Label; Kp By-Pass Shield	2
E8***53	Label; Instruction	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Decals Kit

BE***91	Label Kit; (English-Spanish Decal Kit)	1
FH***16	Label; (Warning - English And Spanish)	1
FH***13	Label; (Caution Console - Spanish)	1
FH***17	Label; (Warning - English And Spanish)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Implement Warning Lights

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	8
03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	2
03***72	Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 5/16" X 1/2", Bolt; (B) 5/16"X1/2", Bolt; 5/16" X 1/2", (3.7 M (12-Ft.), 9 Used Per Tooth Bar) (4.3 M (14-Ft.), 12 Used Per Tooth Bar) (4.8 M (16-Ft.), 12 Used Per Tooth Bar), Bolt; 5/16"X1/2", Bolt; 5/16" X 1/2", 9 Used, 3.7m (12 Ft); 12 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 5/16" X 1/2", Each Additional Tooth Bar, Bolt; 5/16" X 1/2", (Per Tooth Bar), Bolt; (Sub For Mg280616), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.), Bolt; 5/16" X 1/2" (215 And 216-1 Used; 218, 220, 222, And 224-2 Used; 230-4 Used), Bolt; 5/16" X 1/2" (Sub For 03h1607), Bolt; (C) 5/16" X 1/2", Bolt; (B) 5/16" X 1/2", Bolt; 5/16x1/2", Bolt, Bolt; (C) 5/16"X1/2", Bolt; 5/16" X 1/2" (915-1 Used; 918, 920, 922, 924 And 925- 2 Used; 930-4 Used), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7m (12-Ft.) (12 Used Per Tooth Bar, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; (A) 5/16" X 1/2", Bolt; X 5/16" X 1/2", Bolt; 5/16" X 1/2" (A), Bolt; 5/16" X 1/2", 9 Used Per Tooth Bar, 3.7 M (12-Ft.) 12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 5.0 M (16-Ft.)	4
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	0

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Jack Stand

24***25	Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00*00-), 370 (0000-) And 390 (0000-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-0082), 370 (-0093) And 390 (-00*80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334)	1
AA***92	Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00*26; 7700-0020; 7800-01**50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650	1
AA***70	Handle; (A: Knob Type), Handle; (A), Handle; For Jack With Green Knob, Handle, Handle; For Jack With Green Knob., Handle; Knob Type, Handle; Green, Handle; For Jack With Green Handle, Handle; (Sleeve Type), Handle; (Knob Type), Handle; (Sub For Aa27831), Grey Knob, Handle; (Sub Pt18656), Handle; (Knob Type) (Sub Pt18656)	1
AN***55	Jack; (With Sleeve Handle), Jack; 2000 Lbs., Jack; (For Use With Drawbar Clevis) 2-Bar Frame Only, Jack; (With Knob Handle), Jack; 2-Unit Hitch, Jack; (Sub For Ac14129), Jack, Jack; (700), Jack; (For Use With Drawbar Clevis), Jack; (Sub For Ac14138), Jack; (750), Jack; With Knob Handle, Jack; With Sleeve Handle, Jack; (Includes Handle)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Non Text Decals

CC***37	Label; (A) (Sub For Cc26932), Label, Label; 1000 Rpm, Label; (Sub For Cc26932)	1
CC***59	Label; Lh, Label, Label; Rh, Label; (A: Only For 50 Km/H), Label; Lh, Rh, Label; (A: Only For Japan)	1
FH***33	Label	1
FH***34	Label; Float Preset On/Off	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Outer Mirrors Kit (For 7000 Series Tractor With Comfortguard Cab)

19***56	Cap Screw; M10 X 60 Lh, Rh, Cap Screw, Cap Screw; M10 X 60 (Grade 8.8) Shear Bolt, Cap Screw; M10x60, Cap Screw; M10x70, Cap Screw; (C) M10x60, Cap Screw; M10 X 60 (Rigid), Cap Screw; M10 X 60 Rh, Lh, Cap Screw; X M10 X 60, Cap Screw; (A) (B) M10 X 60 (Shear Bolt) (Grade 8.8), Cap Screw; M10 X 60, Cap Screw; 10x60mm, Cap Screw; (B: (Xxxxxx- ) 8560-00*43; 8760-0019; 8960-0061) M10 X 60, Cap Screw; (C) (D) M10 X 60, Cap Screw; M10 X 60 (For Dc54470), Cap Screw; M10 X 60, (312) M10x60, Cap Screw; M10 X 60 M10x60, Cap Screw; M10 X 60 (For Dc54470, Dc212852), Cap Screw; M10 X 60, M10x60, Cap Screw; M10 X 60 (Use With R104705), Cap Screw; M10 X 60 (For Dc212852), Cap Screw; (A) M10x60, Cap Screw; M10 X 70, Cap Screw; M10 X 60, M10 X 60, Cap Screw; M10 X 60 (Use With R104705 And R84034), Cap Screw; (B) M10 X 60, Cap Screw; M10 X 60 (Shear Bolt) (Grade 8.8), Cap Screw; (A), Cap Screw; M10, Cap Screw; (A: Starting From Series Number 2109 (0701- ), 2111 (0701- ), 2113 (0701- )) (B: Starting From Series Number 2115 (0701- ), 2117 (07*01- )) M10 X 60, Cap Screw; (B) M10x60	4
19***60	Screw; (A: With Engine Stage Ii Acc. 97/68/Ec) M8 X 20, Screw; M8 X 20 (Hs, Head Marked 10.9), Units No. 1, 2, 4, 5, And 6, Screw; M8 X 20 (Hs, Head Marked 10.9) (Sub For N275980), Screw; M8 X 20 M8 X 16, (Hs=10.9), Screw; M8 X 20 M8x20 (For Al117812), Screw; (A: With Engine Stage Ii Acc. 97/68/Ec) M8 X 20 (10.9), Screw; M8 X 20 Units No. 1, 2, 4, 5, And 6, Screw; M8 X 20 (Hs, Head Marked 10.9), Screw; M8 X 20 European Community, Screw; (A: European Version) M8 X 20, Screw; (A: With Engine Stage Ii Acc. 97/68/Ec) M8 X 20 (Hs=10.9), Screw; M8 X 20 Hs=10.9, Screw; (A) M8 X 20, Screw; M8 X 20, (Sub For J780820), Screw; M8 X 20 (Use With Kv22940), Screw; M8 X 20 M8 X 20, (Hs=10.9), Screw; M8 X 20, (10.9), Screw; M8 X 20 (Hs=10.9) (Use With Al71322, Al71323, Al71324 Or Al71325), Screw; M8x20, Screw; 8x20mm, Screw; M8 X 20 M8x20 (10.9), Screw; M8 X 20 (Hs=10.9), Screw; M8 X 20 (Hs, 10.9), Screw, Screw; M8 X 20 (10.9), Screw; M8 X 20, Screw; M8 X 20 (Sub For J780820), Screw; (A: European Community) M8 X 20, Screw; (A: With Hydraulic. Pump 27cm3) M8 X 20, Screw; M8 X 20 (Hs, Head Marked 10.9) Gear Case Assembly, Screw; M8 X 20 Sub For J780820	4
28***82	Bushing, Bushing; 0.546" X 0.840" X 5/8", Bushing; 0.546" X 0.840" X 5/8", Bushing; (A: European Version) (B: W/ Category Ii) (C: W/ Pick-Up Hitch) (D: W/ Sway Blocks) 0.546" X 0.840" X 5/8", Bushing; 13.868 X 21.336 X 15.875 mm, Bushing; 1/2" X 5/8", (Sub For 28h2498)	6
37***97	Screw; (A: Only For 1.8 M Pickup) M10 X 35, Screw; (A: Only For 2.0 M Hiflow Pickup) M10 X 35, Screw; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M10 X 35, Screw; M10 X 35 (Fi), Screw; M10 X 35, Screw; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M10 X 35, Screw; (A: For 25 Knives Only) M10 X 35, Screw; (A: Only For 2, 0 M Hiflow Pickup) M10 X 35, Screw; (A: For 14 Knives Only) M10 X 35	6

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Outside Mirror (Adjustable)(For 6000 Series Tractor With Comfortguard Cab)

12***65	Washer; (A) 8.100 mm, (Battery Cable), Washer, Washer; Use W/ Az17516 - Az17518, Washer; 8 mm, B+, Washer; M8, (Sub For Ch11475), Washer; (Disk), Washer; 8.100 mm, Washer; 8 mm 8.100 mm, Washer; (Sub For 12h303), Washer; (B), Washer; (312), Washer; (Use With Az17518), Washer; (Not Used This Application), Washer; 8 mm, M8x25, Washer; 8 mm Use With T27860 And 14m7273, Washer; 8 1mm, Washer; (B) 8mm (Sub For 12m1625), Washer; 8 mm (Engine Marked -Jk1, -Jk1e, -Ejk1, -Ejk1e), Washer; 8 mm, 6203, Washer; 0.315", Washer; B10, Washer; (Sub For Ch11459) (Use With 3011df And 3014df), Washer; 8 mm (A), (B), Washer; (B: Dubuque (T0) Esn -89*59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; 8 mm (0.315") (1000 Rpm Only), Washer; (A: From Sr.No. 5103s-0162, 5203-0062, 5104/5204/5038d-0001.) 8 mm, Washer; (312) 11x21x2mm, Washer; 8,1mm, Washer; (B: Dubuque (T0) Esn 7767-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (A: Upto Sr.No.5103e-0054, 5103-0165, 5103s-0162, 5203-0062.) 8 mm, Washer; (A: Rice/Corn) 8 mm, Washer; (D: Dubuque (T0) Esn 7112-Xxxxxx) (E: Saran (Cd) Esn Xxxxxx-Xxxxxx) (F: Torreon (Pe) Esn Xxxxxx-Xxxxxx) 8 mm, Washer; 8m, Washer; (A: See Your Authorized Pump Repair Station For Internal Parts) (B: Dubuque (T0) Esn 7767-) (C: Saran (Cd) Esn -Xxxxxx) 8 mm, Lock Washer; 8 mm, (Sub For A590908), Washer; (A) (B) M8, Washer; (A: For Small Grain) 8 mm, Washer; 8 mm, (Use With Ar92109), Washer; (D: Dubuque (To) Esn -7111) (E: Saran (Cd) Esn -Xxxxxx) (F: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (B: Dubuque (T0) Esn 7096-8959) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm Black, Washer; 8 mm, (45 Used 12 Ft., 60 Used 15 Ft.), Washer; 8 mm (C), Washer; 8 mm (European), Washer; (B: Saran (Cd) Esn Xxxxxx-) 8 mm, Washer; B8, Washer; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) (D) 8 mm, Washer; 5/16", Washer; (C: Dubuque (T0) Esn 7132-) (D: Saran (Cd) Esn Xxxxxx-) (E: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (A: From Sr.No.5103e-0054, 5103-0165, 5103s-0162, 5203-0062, 5104/5204-0001, 5038d-0001.) 8 mm, Washer; (B: Dubuque (T0) Esn 7036-7314) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) (D: Torreon (Pe) Esn Xxxxxx-Xxxxxx) 8 mm, Washer; 8 mm 8 mm, Washer; 8 mm (Engine Marked -Jk2, -Jk2e, -Ejk2, -Ejk2e), Washer; (B: Dubuque (T0) Esn 7026-7139) 8 mm, Washer; (B: Dubuque (T0) Esn -7095) 8 mm, Washer; 8 mm Tk=8mm, Washer; (B: Dubuque (To) Esn 7096-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) (E: Dubuque (To) Esn -8959) 8 mm Black, Washer; 8 mm, (Sub For 12h303) 8-Row Wide R.H. Transmission, Washer; (B: Dubuque (T0) Esn 7140-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm (Sub For R89944), Washer; M8 (C) (D), Washer; (B: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (Sub For R53669), Washer; 8 mm, (Sub For (6) 12h303), Washer; 8 mm, (Use W/3009df, 3011df, 3014df Or 3015df) (4019df, 4020df), Washer; (B: Esn -7647) (C: Esn 7410 -7655) 8 mm, Washer; (A: For 9650 (6901-) & 9750 (6901-)) 8 mm, Washer; (R) 8 mm, Washer; 8.100 mm, (Use With Ar92109), Washer; 8 mm (A) (B) (C), Washer; 5/16", W/ 24h1136, Washer; 8 mm, (Sub For (9) 12h303), Washer; (B: Dubuque (T0) Esn 7315-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn All) 8 mm, Washer; (B: Dubuque (To) Esn 7140-) (C: Dubuque (To) Esn -8959) (D: Saran (Cd) Esn -Xxxxxx) (E: Torreon (Pe) Esn -Xxxxxx) 8 mm (Sub For R89944), Washer; 8 mm, (Sub For Ch11459) (Use With 3009df), Washer; 8 mm, 3101, 3106, Washer; (B: Dubuque (To) Esn 7059-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; 8 mm (B), Washer; 8 mm (Use With Re254952), Washer; 8, Washer; 8 mm, (Code 2912), Washer; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-0061.) 8 mm For Heavyduty Transmission (1), Washer; 8 mm, (Australia And New Zealand 8 Per), Washer; (B) 8 mm, Washer; 12mm, Lock Washer; 8 mm, Washer; (B: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; 8 mm, (Sub For 12h303) 12-Row Narrow R.H. Transmission, Washer; 8 mm, Belt, Washer; 8mm, Washer; (A) (B), Washer; 8 mm, (Use With Code 3103, 3105, 3106), Washer; 8 mm, (Sub For (12) 12h303), Washer; 8 mm 12m7065 Nla; Sub For A590908, Washer; (B: Dubuque (T0) Esn -8959) (C: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; 8 mm 8mm, Washer; (A: - Xxxxxx 457(- 3100) 557(- 3150) 457s(- 3100)) 8 mm (1000 Rpm), Washer; (C), Washer; (312) 8mm, Washer; (B: Dubuque (T0) Esn 7370-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm (Sub For R89944), Washer; (A: Included With An220402 Reservoir) 8 mm, Washer; 8 mm, (Not Pictured), Washer; (B: Dubuque(T0) Esn 7095-7369) 8 mm, Washer; (A: - Xxxxxx 467(- 3100) 567(- 3150) 467s(- 3100)) 8 mm (1000 Rmp), Washer; 8 mm (Sub For Er022856 Appl), Washer; (B: Dubuque (To) (7059-)) (C: Saran (Cd) (Xxxxxx -)) (D: Torreon (Pe) (Xxxxxx-)) 8 mm, Washer; 8 mm (Hs, Head Marked 10.9), Washer; 8 mm (15 Per Australia And New Zealand), Washer; 8 mm, (Use With 19m7964), Washer; (Sub For Ch11459) (Use With 4019df), Washer; 8 mm, M8, Washer; (B: Without Lateral Tilt) 8 mm, Washer; (A: Ord Kit Dq64098) 8 mm, Lock Washer; 8 mm, (Sub For Ffsb103370), Washer; (B: Dubuque (To) Esn -7111) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (B: Dubuque (T0) Esn 7315-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (A), Washer; (B: Esn -7647) (C: Esn 7410 -7655) 8 mm, Washer; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-0061.) 8 mm, Washer; (B: For Germany Only) 8 mm, Washer; 8mm (Sub For 12h303), Washer; (B: Dubuque (To) Esn -7058) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; 8 mm, (Use With 19m7162), Washer; 8 mm, (Code 1613), Washer; (A: For 9650 (-6900) & 9750 (-6900)) 8 mm, Washer; 8 mm, (Sub For 12h303), Washer; 8 mm, (Nlr), Washer; 5mm, Washer; 8 mm, (6 Used, 6 Bolt) (8 Used, 8 Bolt), Washer; 8 mm M8, Washer; (A) 8 mm, Washer; 8 mm, (Sub For Ch11475), Washer; 8 mm, (Df105), Washer; 8 mm (Hs=10.9), Washer; 8 mm, (Sub For (3) 12h303), Washer; 8 mm, Washer; (A: Note; 9550 (7001-) 9550sh (7001-)) 8 mm, Washer; (B: Dubuque (To) Esn 7112-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; 8 mm 0.319", Washer; (A: Mechanical Front Wheel Drive) 8 mm, Washer; 8 mm (Sub For A590908), Washer; (B: Dubuque (T0) Esn 7767-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (A) 8 mm, (Sub For 12h303), Washer; (A: With 540/540e Power Take-Off) 8 mm, Washer; 6mm, Washer; M8x20, Washer; 8mm (Sub For 12m1625), Washer; 8 mm Black, Washer; 8 mm (0.315"), Washer; 8 mm, (Sub For Ce18059), Washer; (B: Dubuque (To) Esn -7131) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (A) (S) 8 mm, Washer; (B: Dubuque (T0) Esn -7139) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (A: From Sr.No.5203-0062, 5104-0001, 5204-0001.) 8 mm, Washer; M8, Washer; (B) 0.315", Washer; (A: Upto Sr.No. 5103s-0161, 5203-0061.) 8 mm, Washer; (Sub For R89944), Washer; 8.100 mm, M8, Washer; 8 mm (Sub For Ch11475), Washer; 8 mm, (Sub 12m7065), Washer; (Adj. Strap And Shield To Alt. Screw), Washer; (Sub For Ch11459), Washer; 8 mm, (Sub 12m7056), Washer; (B: Dubuque (T0) Esn -7139) 8 mm, Washer; (A) (B) 8 mm, Washer; (B: Dubuque (T0) Esn 7112-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-0061.) 8 mm For Heavyduty Transmission, Washer; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) 8 mm (Sub For R89944), Washer; (B: Use With Ar93448) 8 mm M8, Washer; (B: Saran (Cd) Esn -Xxxxxx) 8 mm, Washer; (B: Dubuque (To) Esn 7132-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (B: Saran (Cd) Esn Xxx-) (C: Torreon (Pe) Esn Xxx-) 8 mm, Washer; 8 mm, (Not Included) (Df105), Washer; (B: Dubuque (T0) Esn 7813-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; 8 mm (5/16"), Washer; 8 mm, (Sub For 12m7008), Washer; (A) 8 mm, (1000 Rmp), Washer; 8 mm, (1000 Rpm), Washer; (B: Dubuque (T0) Esn -7139) 8 mm, Washer; (B) B8, Washer; (B: Dubuque (To) Esn -7131) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (S) (A) 8 mm, Washer; 8 mm (Use With Ae53101, At185951 And Ah165975), Washer; (B: Dubuque (T0) Esn 7140-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm (Sub For R89944), Washer; 8 mm (A), Washer; 8 mm Sub For 12m7056, Washer; (A: From Sr.No.5103e-0054, 5103-0165, 5103s-0162.) 8 mm, Washer; 8 mm (0.315") (Sub For 12h303), Washer; (B: Dubuque (T0) Esn -7025) 8 mm, Washer; (B: Dubuque (To) Esn -8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (Hoe), Washer; (A: Saran (Cd) Esn Xxxxxx-) (B: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (Use With Ae53101, At185951 And Ah165975), Washer; (B: Dubuque (T0) Esn -8959) (C: Saran (Cd) Esn -Xxx) (D: Torreon (Pe) Esn -Xxx) 8 mm, Washer; (A: From Sr.No.5310s(0084-), 5410(0019-), 5610(0001-).) 8 mm, Washer; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (A: Rice Version) 8 mm, Washer; 8 mm Use With Az17518, Washer; 8 mm B+, Washer; (B: Dubuque (T0) Esn -7111) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (Code 1611), Washer; (B) M8, Lock Washer; 8 mm, (Sub For Ffsb109185), Washer; (A: Optional For European Application.) 8 mm, Washer; 8 mm, (Used With Code 5701, 5702, 5703), Washer; (B: Dubuque (T0) Esn 7059-7314) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) 8 mm, Washer; (A: 2wd) 8 mm, Washer; (B: Dubuque (To) Esn -7058) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (B: Dubuque (T0) Esn -8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (B) (C: Esn 7410 -7655) 8 mm, Washer; (B: Dubuque (To) Esn -7035) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; M8, 8450 Tractor, Washer; 0.315", (Sub 12m7065), Washer; 8 mm, (Sub For 12h303) (Sub 12m7056), Washer; 8 X 14,8 X 2 mm, Washer; (Af), Washer; (D: Components Of Item Dq73362) 8 mm, Lock Washer; (Sub For Ffsb103370), Washer; 8 mm, For Re61095, Washer; (B: Dubuque (T0) Esn 7059-7314) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) (D: Torreon (Pe) Esn Xxxxxx-Xxxxxx) 8 mm, Lock Washer; 8 mm, (Sub For Ffsb112212), Lock Washer; 8 mm (0.315"), Washer; (B: Dubuque (To) Esn -70**95) 8 mm	4
19***13	Screw; M8 X 30 M8x30, Screw; M8 X 30 Lh, Screw; (A: Use If Equipped With Left-Hand Rear View Mirror) M8 X 30 (Hs=10.9), Screw; M8 X 30, Screw; M8x30	4
21***46	Screw; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) M6 X 16, Screw; M6 X 16 (Sub For Er021630 Appl), Screw; (B) 6x15mm, Screw; M6 X 16, Screw, Screw; M6 X 16 (Sub For Er21630 Appl), Screw; M6 X 16 (Sub For 21m7296), Screw; M6x16, Screw; (A: Used In 5615 Hc Too) M6 X 16, Screw; 6x16mm, Screw; M6 X 16, Screw; (B) M6 X 15	1
21***48	Screw; M6 X 30, Screw; M6 X 30 (Sub For Er021374 Appl), Screw; M6 X 30, Screw; (A) M6x30, Screw; M6x30, Screw; (A), Screw; M6 X 30 Nlr, Screw; M6 X 30, (Australia And New Zealand Units Only), Screw; M6 X 30, (Use With Two-Lever Controller), Screw	4

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Outside Rear View Mirror (Tractor)

12***02	Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70*00) 9550sh ( -7000)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (7001- ) 9550sh (70*01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual)	1
14***86	Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-0100; 4255-0100; 4455-0200) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-0030; 8760-0021; 8960-0036) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-7000) 9550sh (-7000)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-7000) & 9750sts (-70*00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"	3
19***19	Cap Screw; (A: (-Xxxxxx) Tractor Serial No. 8450-00*00; 8650-0000) 1/4" X 5/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; 1/4" X 5/8" (Use With 12h302 And 14h786), Cap Screw, Cap Screw; (B) 1/4" X 5/8", Cap Screw; 1/4" X 5/8" Use With H118414, Cap Screw; (A) 1/4"X5/8", Cap Screw; (A: 2 Used Dual, 3 Used Triple) 1/4" X 5/8", Cap Screw; 1/4" X 5/8" Door, Cap Screw; 1/4" X 5/8", (Also Order 12h302 And 24h1821) (Sub For Ar26566), Cap Screw; (A) 1/4" X 5/8", Cap Screw; 1/4" X 5/8", Cap Screw; 1/4" X 5/8", (United Kingdom Only), Cap Screw; 6.350 X 15.875 mm (1/4" X 5/8"), Cap Screw; 1/4" X 5/8", (Corn Head And One Row Ear Corn Units), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 1/4" X 5/8", Cap Screw; 1/4" X 5/8" (Use With 14h786) (Sub For H99282), Cap Screw; (A) (B) (C) 1/4" X 5/8", Cap Screw; 1/4" X 5/8", When Computer Trak Is Used, Cap Screw; 1/4" X 5/8", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Cap Screw; 1/4" X 5/8" (For Az100822), Cap Screw; 1/4" X 5/8", (4 Used, Italy) (2 Used, U.K. And Ireland), Cap Screw; (A), Cap Screw; 1/4" X 5/8" (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Cap Screw; 1/4" X 5/8", (Corn Head Attachment), Cap Screw; 1/4" X 5/8" (For Axe12941), Cap Screw; 1/4" X 5/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; (B) 1/4"X5/8", Cap Screw; 1/4" X 5/8" (1 Used With Hydraulic. Auger Swing; 3 Used Without Hydraulic. Auger Swing), Cap Screw; (A: 3 Used Triple, 4 Used Quad) 1/4" X 5/8", Cap Screw; 1/4" X 5/8" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Cap Screw; 1/4"X5/8", Cap Screw; (C) 1/4" X 5/8", Cap Screw; 1/4" X 5/8" 1/2" Bore, 15 Teeth, Cap Screw; 1/4" X 5/8", Cap Screw; 1/4" X 5/8", (Use With Am106358), Cap Screw; 1/4" X 5/8", (1-Row Ear Corn Unit), Cap Screw; 1/4" X 5/8" (Use With 14h786), Cap Screw; (A: (-Xxxxxx) 8560-0000; 8760-0000; 8960-00**00) 1/4" X 5/8"	1
19***48	Bolt; 1/4" X 3/4", Right-Hand, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle - 2 Used) (Bucket - 54 Used), Bolt; (B) 1/4" X 3/4", Bolt; 1/4" X 3/4", Bolt; 1/4" X 3/4", Hs, Sae 8, Bolt; (A: Install In 1 Select. Control Valve) 1/4" X 3/4", Bolt; 1/4" X 3/4" (To Transmission Sight Tube Bracket), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Bolt; 1/4" X 3/4", (Europe), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 66 Used), Bolt; 1/4" X 3/4", Not Used This Application, Cap Screw; 1/4" X 3/4", Bolt; 1/4" X 3/4", (84 Used For 714, 714a; 98 Used For 716, 716a), Bolt; 1/4"X3/4", Bolt; 1/4' X 3/4", Bolt; 1/4" X 3/4", (Use With Gd1072), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; (A) 1/4" X 3/4", Bolt; 1/4" X 3/4", Europe, Bolt; 1/4" X 3/4" (Use With 14h786 And 24h1286), Bolt; 1/4" X 3/4", (Sub For Mg88573), Bolt; 1/4" X 3/4" 1/4 X 3/4, Bolt; 1/4" X 3/4" (Sub For 19h1919, This Application), Bolt; 1/4" X 3/4" (A), (B), Bolt; 1/4" X 3/4", Sweden Only, Bolt; 1/4" X 3/4", (Sub For Hmx03107), Bolt; 1/4" X 3/4", (Use With 12h302 And 14h786), Bolt; (A: 6076trw07 Only) 1/4" X 3/4", Bolt; 1/4" X 3/4", 7000 Flex-Fold And 7100 Integral Planters Only, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle-2 Used; Bucket-96 Used), Bolt; 1/4" X 3/4" (Use With 14h786), Bolt; 1/4" X 3/4", Herbicide Only, Bolt; 1/4" X 3/4", (Not Used W/E55662), Bolt; 1/4"X3/4, (Use With Ar91662, Re30685), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used), Bolt; 1/4"X3/4 (For Ar91662, Re30685), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4" (911), Bolt; 1/4" X 3/4" (A), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle), Cap Screw, Bolt; (A: ( -Xxxxxx) 8560-00*03; 8760-0051; 8960-00**14) 1/4" X 3/4", Bolt; (Use With Pt17843 Windowpane), Bolt; 1/4" X 3/4" Amber, Bolt; 1/4" X 3/4", (4402,4403), Bolt; 1/4" X 3/4", Amber, Bolt; (C) 1/4" X 3/4", Bolt; 1/4" X 3/4", 28" Rows Only, Bolt, Bolt; 1/4" X 3/4" (Sub For At216052), Bolt; 1/4" X 3/4", Germany And Italy, Bolt; 6.350 X 19.050 mm, Bolt; 1/4" X 3/4", (4408,4409), Bolt; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4" X 3/4", Bolt; (A) 1/4"X3/4", Bolt; 1/4" X 3/4", Small Hopper, Bolt; X 1/4" X 3/4", Bolt; 1/4" X 3/4" 1/4" X 0.75" (Sub For R138749), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle), Bolt; 1/4" X 3/4" (Europe), Bolt; 1/4" X 3/4", (56 Used For 714, 714a; 64 Used For 716, 716a), Bolt; 1/4" X 3/4", (Code 1637), Bolt; 1/4" X 3/4" (Not Illustrated), Cap Screw; 6.350 X 19.050 mm, Bolt; (A) R.Bosch,1/4"X3/4", Bolt; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4" X 3/4", Bolt; 1/4" X 3/4", (4402-4403), Bolt; 1/4" X 3/4" 1/4 X 3/4", Bolt; (A) 6.350 X 19.050 mm (1/4" X 3/4"), Cap Screw; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Bolt; 1/4" X 3/4" (4408-4409), Bolt; 1/4" X 3/4", ((3) Less Cab) ((2) Cab), Bolt; 1/4" X 3/4" For Steel Cleaning Paddles, Bolt; 1/4" X 3/4", ((3) Used Less Cab, (2) Used With Cab), Bolt; (C) (D) 1/4" X 3/4", Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Bolt; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4" (For Az100822), Bolt; 1/4" X 3/4" (8630), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 96 Used), Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Safety Chain For Towed Equipment

34***45	Pin; 1/8" X 5/8" (B), Pin; (A), Pin; 1/8" X 5/8", Pin; 1/8" X 5/8" (Use With Ar90581), Pin; 1/8" X 5/8" (Use With 10, 000 Lb Chain), Pin; (C) 1/8" X 5/8", Pin; 1/8" X 5/8" (Ru And Or), Pin; 1/8" X 5/8", (Rc And St), Pin; 1/8" X 5/8", (Use With 10,000 Lb Chain), Pin; (Use With 10,000 Lb Chain), Pin; 1/8" X 5/8", (Ru And Or), Pin; 1/8"X5/8", Pin; (A) 1/8" X 5/8", Pin, Pin; (B) 1/8" X 5/8", Spring Pin; 1/8" X 5/8", Pin; 1/8" X 5/8", Used With 10,000 Lbs. Chain, Pin; 0,125" X 0,625", Pin; (A: 10, 000 Lb.) 1/8" X 5/8"	1
AE***67	Safety Chain Adapter; (B) (Sub Ae71231), Safety Chain Adapter; (Sub For R69403, R74599, R74600, R74601 And R74602), Safety Chain Adapter; (Sub Ae71231), Safety Chain Adapter, Safety Chain Adapter; (A) Nsep (Ord Ae71231), Safety Chain Adapter; Nsep (Ord Ae71231)	1
AE***74	Safety Chain; 11.1mm (7/16"), Safety Chain; (C: Tow-Between Cart) 30,000 Lbs (Sub Ae71230), Safety Chain; (30, 000 Lb.), (Sub Ae71230), Safety Chain; (Sub Ae71230) (30,000 Lb.), Safety Chain; (Sub Ae71230), Safety Chain; 30, 000 Lbs (Sub Forae71230) , 430 Bu	1
AE***30	Safety Chain; 30, 400 Lbs (Sub For Ae58574) Tow-Between Cart, Safety Chain; (C: Tow-Between Cart) 30, 000 Lbs. (Sub Aa58161, This Application) (Use With A31870, R33877 And 19m7779), Safety Chain; 30,400 Lbf; Tow-Between Cart, (Sub For Ar90583), Safety Chain; 30, 400 Lbf (Alternate Design), Safety Chain; 43 Links 11.1mm (7/16") Dia Chain, Safety Chain; 43 Links 11.1mm (7/16") Dia Chain, (Sub For Ar90583 Or Ae58574), Safety Chain; 30, 400 Lbf - 135kn, For 430 Bu (Sub For Ae58574), Safety Chain; (30, 400 Lbf - 135 Kn), Safety Chain; 30,000 Lb, Safety Chain; (E: 43 Links 11.1mm (7/16") Dia Chain), Safety Chain; 30, 400 Lbf - 135kn, Safety Chain; 43 Links, 11.1mm (7/16") Dia Chain (Sub For Ar90583 Or Ae58574), Safety Chain; (30,400 Lbf - 135 Kn), Safety Chain, Safety Chain; 43 Links, 11.1 mm (7/16 Inch) Dia Chain, 135 Kn (30, 400 Lbf), Safety Chain; (C: Single-Rank) 30400 Lbs, Safety Chain; (30,400 Lbf - 135kn), Safety Chain; (30, 000 Lbs.) (For 5-Section Machines), Safety Chain; 30, 400 Lbf, Safety Chain; 30,400 Lbf (Alternate Design), Safety Chain; 30,000lb, Safety Chain; 30,400 Lbf - 135kn Tow-Between Cart, Safety Chain; 30,400 Lbf, Safety Chain; 11.1 mm (7/16 Inch) 43 Links, Dia Chain, 135 Kn (30, 400 Lbf), Safety Chain; 30, 400 Lbf - 135kn (Sub For Ar90583 And Ae58574), Safety Chain; 30,400 Lbf - 135kn, Safety Chain; (30, 400 Lbf - 135kn), Safety Chain; (Sub For Ar90583 And Ae58574) 30,400 Lbf - 135kn; Tow-Between Cart, Safety Chain; 30, 000 Lbs (For 5-Section Machines), Safety Chain; (E: 43 Links 11, 1mm (7/16") Dia Chain), Safety Chain; 30, 400 Lbf - 135kn (Sub For Ar90583 And Ae58574) Tow-Between Cart, Safety Chain; 11.1 mm (7/16") (30, 000 Lb)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Spout Cap Tilt And Hydraulic Wagon Hitch Release Cables

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	1
03***29	Bolt; 5/8" X 2-1/4" (Use With 12h294 And 14h1039), Bolt; (C: For 390 Mower) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4" (Sub For 03h1856), Bolt; 5/8"X2-1/4", Bolt; 5/8" X 2-1/4" (844,61*46-; 1243,62*77-)	1
03***74	Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.	2
03***36	Bolt; 5/8" X 1-1/4" Rh Front, Bolt; 5/8" X 1-1/4", Bolt; 5/8" X 1-1/4", (Sub 03h1652)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Spout Cap Tilt Cable (Less Hydraulic Wagon Hitch Release)

03***29	Bolt; 5/8" X 2-1/4" (Use With 12h294 And 14h1039), Bolt; (C: For 390 Mower) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4" (Sub For 03h1856), Bolt; 5/8"X2-1/4", Bolt; 5/8" X 2-1/4" (844,61*46-; 1243,62*77-)	1
03***52	Bolt, Bolt; 5/8"X1-1/2", Bolt; 5/8" X 1-1/2", Bolt; 5/8" X 1-1/2" Lh, Bolt; 5/8" X 1-1/2", (Long), Bolt; 5/8" X 1-1/2" (Use With 14h812)	1
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	1
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Miscellaneous : Warning Light Wiring Harness Clamps

E5***38	Screw; (38"), Screw; 30" And 38", (2 Used, Lh; 2 Used, Rh), Screw; 9.525 X 22.400 mm (3/8" X 0.882") Use With Double Auger (Germany And Italy), Screw; Self-Tapping, (Sub For E18899), Screw; 3/8" X 7/8", Screw; 9.525 X 22.400 mm (3/8" X 0.882") Thread-Rolling, Screw; Self-Tapping, 3/8" X 7/8", (Sub For E18899), Screw; 3/8" X 7/8", (Sub For E18899), Screw; Self-Tapping, 3/8", (Sub For E18899), Screw; L.H., Screw; 8 Used 3.7 M (12 Ft) Platform, 12 Used 4.3 M (14 Ft) Platform And 16 Used 5.0 M (16 Ft) Platform, Screw; 3/8" X 7/8", Self-Tapping, Screw; Thread Forming, Screw; 3/8" X 7/8", Self-Tapping, (Sub For E18899), Screw; (Sub For E19941), Screw; Self-Tapping 3/8" X 7/8", (Sub For E18899), Screw; 3/8" X 0.882", Thread-Rolling, Screw; 3/8" X 0.882", 7 Nominal (1 Used, 4-Rrc), Screw; 3/8" X 0.882", (3 Used, 3950) (4 Used, 3970), Screw; 3/8" X 7/8" (Sub For E18899), Screw; 3/8" X 0.882", Use With Double Auger, Screw; 3/8"X7/8" (Sub For E18899), Screw; 9.525 X 22.400 mm (3/8" X 0.882"), Screw; (30"), Screw; (Sub For E18899), Screw; 9.525 X 22.400 mm 7 Nominal, Screw; 3/8" X 0.880", Screw; Self-Tapping, Screw; (7 Nominal), Screw; Thread-Rolling, Screw; 3/8", Self-Tapping, (Sub For E18899), Screw; (Sub For E41500, This Application), Screw; 3/8" X 7/8", Thread-Rolling, Screw; 3/8" X 7/8", Thread Rolling, Screw, Screw; 3/8" X 0.882", Self-Tapping, (Sub For E18899), Screw; 3/8"X7/8", Screw; 3/8" X 0.882", Self-Tapping, Screw; 3/8" X 0.882", Screw; X, Screw; (A) 3/8" X 0.882", Screw; 3/8" X 0.882", (3 Used, 3940) (4 Used, 3960), Screw; 3/8" X 0.882", (Sub For E18899), Screw; Thread Rolling, Screw; 3/8" X 0.882", Use With Single Auger, Europe	1
E1***73	Clip; 1/8", Clip, Clip; X, Clip; (Wire)	1
R4***11	Clamp; (A), Clamp; (Sub For T13744), Clamp; (B), Clamp; (A) (Sub For T13744), Clamp; (A: Holds Main Harness) To Lh, Steering Column Support, Clamp; (Charging Circuit And Engine Wiring Harness), Pipe,12.7 mm Od X 76, 31 mm L; Tube - Tee, Upper, Clamp; With Iron-Gard, Clamp; (Power Shift) Lead To Clutch Valve Housing, Clamp; With Surface Wrap, Clamp; (Use On Top Bolt Of Light Bracket), Clamp; (Sub R72853), Clamp; Sound-Gard Body Door, Clamp; Open Coated, Clamp, Clamp; If Equipped With Surface Wrap Option, Clamp; (Fender Harness To Platform Rear Support), Clamp; (A) Harness To Fender Support, Clamp; (Use Top Bolt On Light Bracket)	2
T7***59	Clamp; Id = 21.0 mm, Clamp, Clamp; (Sub For Dq08621), Clamp; (B: Low Profile), Clamp; (B: With Air Conditioning), Clamp; (A), Clamp; (For Al110920), Clamp; Id = 21 mm, Clamp; (A: With Air Conditioning), Clamp; (B: Low Profile Cab), Clamp; Id= 21 mm, Clamp; (D: With Air Conditioning), Clamp; (Sub For Al155013), Clamp; (A: Condition Monitoring System Components), Clamp; Id= 21.0 mm, Clamp; Id = 25.5 mm, Clamp, Clamp; (For Al119373), Clamp; (Sub For T24959)	2

See all parts with full part numbers in Heavy Parts AI →

Powershaft And Gearcase

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Bevel Gear Case (1000 Rpm)

15***61	Pipe Plug; (A: W/O Turbocharger), Pipe Plug; 1/2" (Without Turbocharger), Pipe Plug; (A) 1/2", Pipe Plug; Trasero Lado Izquierdo, Pipe Plug; 1/2", For 3179dl001, Pipe Plug; 1/2", For 3179dl004, Pipe Plug; 1/2", (Turbocharger Drain), Pipe Plug; 12.700 mm, Pipe Plug; 1/2", (Sub For Ar72319), Pipe Plug; 1/2" Lh, Rear, Pipe Plug; 1/2" 1/2"-14npt, Pipe Plug; 1/2", (Without Heater), Pipe Plug; 1/2"-14npt, Pipe Plug; 1/2", (Without Turbo), Pipe Plug; 1/2", Use Without Turbocharger, Pipe Plug; (A: Codes 2102 And 2204 Included) 1/2", Pipe Plug; 1/2", (Use With Ar73097), Pipe Plug; 1/2" (Dn-03), Pipe Plug; 1/2", Without Turbocharger, Pipe Plug; 1/2", (Marked R60256) (Sub For At18074, Marked T20218), Pipe Plug; 1/2", (Sub For T20659), Pipe Plug; 1/2", Fill/Drain, Pipe Plug; 1/2", (Code 1403), Pipe Plug; 1/2", For 3179dl016, Pipe Plug; 1/2" 1/2", Pipe Plug; 1/2", (Less Turbocharger), Pipe Plug; 1/2", (Code 3904), Pipe Plug; 1/2" L.H., Rear, Pipe Plug; 1/2" (A), Pipe Plug; 1/2" (For Ar100178), Pipe Plug; (Use With Re72855, Re203895 Or Re230251), Pipe Plug; 1/2", (Use With Thermostat Housing, Marked R60256), Pipe Plug, Pipe Plug; 1/2", (1403), Pipe Plug; (C) 1/2", Pipe Plug; 1/2", Pipe Plug; 1/2", (Na-D, Na-6, Dn-01, 6n-01), Pipe Plug; 1/2", For 3179dl013, Pipe Plug; 1/2" (Use With Re72855, Re203895 Or Re230251), Pipe Plug; 1/2", (4239d), Pipe Plug; 1/2", (Without Turbocharger)	1
19***10	Cap Screw; 15.875 X 44.450 mm (5/8" X 1-3/4"), Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -6900)) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Wide Only, Cap Screw; 5/8" X 1-3/4" Rh, Cap Screw; 5/8" X 1-3/4" (Sub For (4) Mg9627896), Cap Screw; 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" 5/8" X 1 3/4", Cap Screw; 5/8" X 1-3/4" Hs, Sae 8, Cap Screw; 5/8"X1-3/4" (Sub For 19h1833), Cap Screw; 5/8" X 1-3/4" (Sae 8), Cap Screw; 5/8" X 1-3/4" (Use With Ar52584), Cap Screw; 5/8" X 1-3/4", Torque To 175 Lb-Ft (240 N-M), Cap Screw; 5/8" X 1-3/4", Cap Screw; 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Narrow Only, Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8), Cap Screw; (A: 9550 ( -6900) 9550sh ( -6900)) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" Install Using Never Sieze On Threads, Torque To 170 Lb-Ft (230 N-M), Cap Screw; 15.875 X 44.450 mm (5/8" X 1-3/4"), Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Full Thread, Cap Screw; (B: (Xxxxxx- ) 7710-0077; 7810-00*09) 5/8" X 1-3/4", Cap Screw; Hs, Sae 8, 5/8" X 1-3/4"	4
19***71	Screw; 3/8" X 2-1/4", Screw; 3/8" X 2-1/4" (Socket Head)	14
19***31	Cap Screw; 3/8" X 2-1/2", Lower, Cap Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; (D) 3/8" X 2-1/2" (Hs, Sae 8) (28'-7" Through 32'-1"), Cap Screw; 3/8" X 2-1/2" (Up), Cap Screw; (Sub For E39787), Cap Screw; 3/8" X 2-1/2" Sub For 19h268, Cap Screw; 3/8" X 2-1/2" (For Re500934), Cap Screw; 3/8" X 2-1/2" Lh, Cap Screw; 3/8" X 2-1/2" Low, Cap Screw; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", Low, Cap Screw; 3/8" X 2-1/2" (Sub For Mg280259), Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Re57603), Cap Screw; 3/8" X 2-1/2" (Sae 8), Cap Screw; 3/8" X 2-1/2" (34 Harvester), Cap Screw; 3/8" X 2-1/2" (Use With Re31973 And R42729), Cap Screw; 3/8"-16uncx2-1/2" (Ord T15634, 19h3631), Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8) (Use With T20315), Cap Screw; 3/8" X 2-1/2" Sae 8, Cap Screw; 3/8" X 2-1/2" Lower, Cap Screw; (B) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 2-1/2", (Sub For Mg280259) Hex Head, Cap Screw; 3/8" X 2-1/2" (Upper), Cap Screw; 3/8" X 2-1/2", (Manual), Cap Screw; 3/8" X 2-1/2" (Use With Ar91662), Cap Screw; (A) 3/8" X 2-1/2", Cap Screw; 3/8" X 1-5/8", Cap Screw; 3/8" X 2-1/2" Sae 8 Low, Cap Screw; 3/8" X 2-1/2" 3/8" X 2 1/2", Cap Screw; (A) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 2-1/2", (Use With N260835), Cap Screw; 3/8" X 2-1/2" Lks., Cap Screw; 3/8" X 2-1/2", (Sae 8), Cap Screw; 3/8" X 2-1/2" Pe3029dkv55, Cap Screw; (A: Included In Ae48634) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Ar91662), Cap Screw; 3/8" X 2-1/2", (Code 6212), Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -6900)) 3/8" X 2-1/2", Cap Screw; (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8" X 2-1/2", Cap Screw; X 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Re30685), Cap Screw; 3/8" X 2-1/2" Pe3029tkv50, Cap Screw; 3/8" X 2-1/2", (Use With Ar97707), Cap Screw; 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" (Sae 8), Front, Cap Screw; 3/8" X 2-1/2" (Sub For 19h268)Up, Cap Screw; 3/8"X2-1/2", For 3179dl016, Cap Screw; 9.525 X 63.500 mm (3/8" X 2-1/2") Hs, Sae 8, Cap Screw; (Use With Dd12120), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8"X2-1/2" (For T54638, 14h1076) (Also Ord T15634), Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8) Low, Cap Screw; 3/8" X 2-1/2", (Hd-G), Cap Screw; 3/8" X 2-1/2" Use With Ar91662, Cap Screw; 3/8" X 2-1/2" 3/8" X 2-1/2", Cap Screw; 9.525 X 63.500 mm, Cap Screw; 3/8" X 2", (Sub For Mg280259) Hex Head, Grade 8, Cap Screw; 3/8" X 2-1/2", (Up), Cap Screw; 3/8"X1-5/8", Cap Screw; 3/8"X2-1/2", Cap Screw; 3/8" X 2-1/2" (For T54678, 14h1053) Ord 19h3631, T15634), Cap Screw; 3/8" X 2-1/2", (Use With Re31973 And R42729), Cap Screw; 3/8" X 2-1/2", (Upper), Cap Screw; 3/8" X 2-1/2", (Hs, Sae 8), Low, Cap Screw; 3/8" X 2-1/2", (Use With Re57603), Cap Screw; 3/8" X 2-1/2" Pe3029dkv54, Cap Screw; 3/8" X 2-1/2" Upper, Cap Screw; 9.525 X 63.500 mm (3/8" X 2-1/2"), Cap Screw; 3/8" X 2-1/2", Hs Sae 8, Cap Screw; (Use With R54986 And T20315), Cap Screw; 3/8" X 2-1/2" (Use With Re57603), Cap Screw; 3/8" X 2-1/2", Cap Screw; (B: Xxxxxx- 446(1168) 546(1129)) 3/8" X 2-1/2", Cap Screw; (A: 9550 ( -6900) 9550sh ( -69*00)) 3/8" X 2-1/2", Cap Screw; (B) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" Pe3029dkv50, Cap Screw; 3/8" X 2-1/2", (Also Order N10215), Cap Screw; 3/8" X 2-1/2" Sub For 19h268, Up, Cap Screw; 3/8" X 2-1/2", Hs, Sae 8, Cap Screw, Cap Screw; 3/8" X 2-1/2", (Upper), Cap Screw; 3/8" X 2-1/2" (Use With T20315)(Hs, Sae 8), Cap Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 2-1/2" Used W/L.H. Gauge Wheel, Cap Screw; 3/8" X 2-1/2" Pe3029tkv51, Cap Screw; 3/8" X 2-1/2" Use With Re30685	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Corn Head Drive (243 And 244)

03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	5
03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	3
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	1
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Feed Roll Drive Idler

03***76	Bolt; 3/4" X 2-1/4" 3/4"X 2-1/4", Bolt; 3/4" X 2-1/4"	1
14***12	Nut; (C) 3/4", Nut; 3/4", Slotted, Nut; 3/4" 3/4" Slotted, Nut; (312), Nut; (D) (E) 3/4", Nut; 3/4", Slotted, Unc, Nut; 3/4" (Offset Pull-Type), Nut; 19.050 mm (3/4") Slotted, Nut, Nut; 3/4", Nut; 3/4", Use On Yoke With 3/4" Shaft, Nut; 3/4" Slotted, Nut; (A) 3/4", Nut; 3/4" 3/4" (Slotted), Nut; 19.050 mm (3/4")	2
24***96	Washer; 1-9/32" X 2" X 0.060", (10 Nominal), Washer; 1-9/32" X 2" X 0.060", (4 Nominal Each Support), Washer, Washer; 1-9/32" X 2" X 0.060", Washer; 1-9/32" X 2" X 0.060", (For 2-Unit), Washer; 19/32" X 2" X .060", Washer; 1-9/32" X 2" X .060", Washer; 1-9/32" X 2" X 0.060" 1-9/32" X 2" X 0.060", Washer; 1-9/32"X2"X-060", Washer; 1-9/32" X 2" X 0.060", (21-Foot), Washer; 1-9/32" X 2" X 0.060", (13 Nominal), Washer; 1-9/32" X 2" X 0.060" (10 Nominal), Washer; 1-9/32" X 2" X 0.060" (Use With A74229), Washer; 9/32"X2"	11
AE***23	Support; (Also Order T140425), Support; (Sub For Ae42863) (Also Order T140425)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Feed Roll Gear Case Gears And R.H. Half

19***60	Cap Screw; 3/8" X 1-3/4", Unf, Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Hs, Sae 8), Cap Screw; 3/8" X 1-3/4", Cap Screw; (Sub For (4) Mg508033), Cap Screw; 3/8" X 1-3/4" Unf, Cap Screw; 3/8" X 1-3/4", Unf Sae 8	1
24***13	Washer; (A) (B) 1-13/32" X 2" X 0.060", Washer; 1-13/32" X 1" X 0,06", Washer; (A) 2" X 1-13/32" X .060", Washer; 1-13/32" X 2" X 0.060" 1-13/32 X 2 X .060, Washer; 1-13/32" X 2" X 0.060", Washer, Washer; 1-13/32" X 2" X 0.60", Washer; 1-13/32" X 2" X .060", Ar, Washer; (A), Washer; 1-13/32" X 2" X 0.060" (Use With R100987), Washer; 2" X 1-13/32" X 0.060", Washer; (B: Xxxxxx- 446(11*68) 546(1129)) 1-13/32" X 2" X 0.060", Washer; 1-13/32" X 2" X 0.060" 2"X1-13/32"X.060", Washer; (B) 1-13/32" X 2" X .060", Washer; (A: Included In Ae48634) 1-13/32" X 2" X 0.060", Washer; 13/32"X2"X.060", Washer; (A) 1-13/32" X 2" X 0.060", Washer; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 1-13/32" X 2" X 0.060", Washer; 1-13/32"X2"X.060", Washer; (A: With Fork-Type Pickup) 1-13/32" X 2" X 0.060", Washer; 1-13/32" X 2" X 0.060", (30 Nominal), Washer; 35.712 X 50.800 X 1.524 mm (1-13/32" X 2" X 0.060"), Washer; 35,7 X 50,8 X 1,5 mm, Washer; (B) 1-13/32" X 2" X 0.060", 1-1/8" Hex, Washer; 2"X1-13/32"X.060", Washer; (B: Xxxxxx- 446(1106) 546(11*34)) 1-13/32" X 2" X 0.060", Washer; 1-13/32" X 2" X .060", 35,7 X 50,8 X 1,5 mm, Washer; (B) 1-13/32" X 2" X 0.060", Washer; .060" X 1-13/32" X 2", Washer; 35 X 50,8 X 1,5 mm, Washer; 1-13/32" X 2" X 0,060", Washer; 1-13/32" X 2" X 0.060", (28 Total Nominal), Washer; (A) 1-13/32" X 2" X .060", Washer; 1-13/32" X 2" X .060"	0
34***95	Spring Pin; 7/32" X 7/8", Spring Pin; 7/32"X7/8"	2
34***16	Spring Pin, Spring Pin; 1/4" X 1-1/2", Spring Pin; 1/4" X 1-1/2" (Use With 18-Tooth Sprocket), Spring Pin; 1/2", Spring Pin; 1/4"X1-1/2", Spring Pin; (A) 1/4" X 1-1/2", Spring Pin; 1/4" X 1-1/2", Spring Pin; 1/4" X 1-1/2" 8-Row Narrow Only; Used To Lock In Folding Position When Transporting, Spring Pin; 1/4" X 1-1/2", (A), Spring Pin; 1/4" X 1-1/2" (Sub For 34h105), Spring Pin; 1/4x1-1/2", Spring Pin; 1/4" X 1-1/2" 8-Row Only; Used To Lock In Folding Position When Transporting	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Feed Roll Gear Case L.H. Half

15***18	Pipe Bushing; 3/4" X 1/8", Outside Hex., Pipe Bushing; 3/4"X1/8", Pipe Bushing; 3/4" X 1/8", Pipe Bushing; 1/8", Pipe Bushing; 1/8" 3/4" X 1/8", Pipe Bushing; 3.175 mm, Pipe Bushing, Pipe Bushing; 1/8", (Use With Ae44866)	1
15***84	Pipe Plug; Sq. Hd., 1/2" (Without Cab), Pipe Plug; 1/2"-14npt, (Sub For R55233), Pipe Plug; 1/2" 1/2”,, Pipe Plug; (A: Cd6068dl070) 1/2" 1/2"-14npt (Sub For 15h624), Pipe Plug; 1/2", (Ha-G, Hb-G, Gh-01), Pipe Plug; 12.700 mm, Pipe Plug; (A: Cd4045tl051 , Cd6068dl050) 1/2" 1/2"-14 Npt (Sub For 15h624, This Application), Pipe Plug; (E: ( -Xxxxxx) 4650-01*28; 4850-0093) 1/2", Pipe Plug; 1/2" In Drain Hole, (2) In Oil Level Holes, Pipe Plug; 1/2"-14npt, (Order Re57836), Pipe Plug; 3/4"-14npt, (Sub For 15h665) (Use With 15h616 Or L62675), Pipe Plug; 1/2", (5400), Pipe Plug; 1/2" 14npt, Pipe Plug; 1/2", (1 Used With Cab Heater), Pipe Plug; (D: Tractor Serial No.) 1/2", Pipe Plug; 1/2", (Sub For Ch14818), Pipe Plug; 1/2" (W/ Ar52423, Ar65260), Pipe Plug; 1/2" Npt, Pipe Plug; (Order Re57836) 1/2"-14npt, Pipe Plug; 1/2", (2350,2355,2550,2555,2750,2755 Tractors) (Used With Dual Remote Cylinder Control Valves Only), Pipe Plug; 1/2" Sub For 15h237, Pipe Plug; 1/2" (Sub For 15h624)1/2"-14npt, Pipe Plug, Pipe Plug; 1/2" 1/8"-27 Npt, Pipe Plug; 1/2", (Sub 15h624), Pipe Plug; (Use With An153046), Pipe Plug; 1/2", (For Machines Without Compactors), Pipe Plug; 3/4"-14nptf, (Sub For 15h665) (Use With 15h616), Pipe Plug; 1/2", Sq. Hd., Pipe Plug; Sq. Hd., 1/2" (Dh-01, Dh-02, Gh-01, Dh-03, Ha-D, Hc-D), Pipe Plug; Sq. Hd. 1/2", Pipe Plug, Pipe Plug; (D) (G) 1/2", Pipe Plug; 1/2", (Not As Shown), Pipe Plug; 1/2" (2) In Fill Holes And (1) In Drain Hole, Pipe Plug; (D: (Xxxxxx- ) Tsn 4650-0128; 4850-0093) (G: ( -Xxxxxx) Esn 4650-3214) 1/2", Pipe Plug; 1/2" Npt, (Use With R99864), Pipe Plug; 1/2", (Parking Brake Band Hole), Pipe Plug; 1/2", Drain, Pipe Plug; Sq. Hd., 1/2" (Dh-01, Dh-02, Gh-01, Dh-03), Pipe Plug; 1/2", (Use With Ae44867), Pipe Plug; 1/2", (Use With W22964), Pipe Plug; 1/2" (Sub For 15h237 Appl), Pipe Plug; 1/2", (Use With Re503101), Pipe Plug; 1/2"X14npt, Pipe Plug; 1/2", Without Heater, Pipe Plug; (Use With R106045), Pipe Plug; 1/2" 1/2 Inch (Dh-01, Dh-02), Pipe Plug; 1/2" (Dh-03), Pipe Plug; 1/2", (Code 7001, 7002, 7003, And 7004), Pipe Plug; 1/2" 1/2"-14npt (Use With R502450 Or R516606), Pipe Plug; (E: (Xxxxxx- ) 4650-0128; 4850-0093) 1/2", Pipe Plug; 1/2" 1/2"-14npt, Pipe Plug; 1/2", (Sub For Et10532), Pipe Plug; 3/4"-14npt, Pipe Plug; 1/2" (For Re38083), Pipe Plug; 1/2" Oil Level, Pipe Plug; Sq. Hd., 1/2", (Use With Ar55094), Pipe Plug; (E: (Xxxxxx- ) 4050-0058; 4250-0093; 4450-0211) 1/2", Pipe Plug; 1/2", (Code 1902), Pipe Plug; 1/2" Sq. Hd., 1/2", Pipe Plug; 1/2", Pipe Plug; 1/2"-14npt, Low, Pipe Plug; 1/2" 1/2"-14 Npt, Pipe Plug; 1/2" 1/2" 14npt, Pipe Plug; 1/2"-14npt, Up, Pipe Plug; 1/2" 3/4"-14npt For 15h616or L62675, Pipe Plug; 1/2" (For Ar87419), Pipe Plug; 1/2"-14npt, (Sub For 15h237), Pipe Plug; (1901), Pipe Plug; 1/2", (Used With Code 5702), Pipe Plug; 1/2''-14npt, Pipe Plug; (A: 6068dl070) 1/2" -14 Npt, Pipe Plug; 1/2" (Sub For 15h697), Pipe Plug; 1/2" (Without Heater), Pipe Plug; 1/2" 1/2”-14 Npt, Pipe Plug; 1/2" 3/4"-14 Npt, Pipe Plug; 1/2", For 3179dl016, Pipe Plug; 1/2" (Sub For 15h237), Pipe Plug; 1/2" 1/2"-14 Npt (Sub For 15h624 And Re57836), Pipe Plug; 1/2", (Na-D, Na-G, Na-L), Pipe Plug; 1/2", (For Machines Without Compactor), Pipe Plug; 1/2" -14 Npt, Pipe Plug; 1/2", (Use With An153046), Pipe Plug; 1/2", (Ea-G, Ge-01), Pipe Plug; 1/2" 1/2"-14npt (Sub For 15h624,This Application), Pipe Plug; 1/2", (Hb-G, Gh-01), Pipe Plug; (D: (Xxxxxx- ) 4650-0128; 4850-00*93) 1/2", Pipe Plug; 1/2" -14npt, Pipe Plug; (A: Threads With Pre-Applied Sealant) 1/2" 1/2''-14npt (Sub For 15h624), Pipe Plug; 1/2" 1/2"-14nptf, Pipe Plug; 1/2" (Dh-01, Dh-02, Gh-01, Gh-02, Hc-D, Hg-G), Pipe Plug; 3/4"-14nptf, (Use With 15h616 And L62675) (Sub For 15h665), Pipe Plug; 12.700 mm (1/2"), Pipe Plug; 1/2", (Park Brake Band Hole), Pipe Plug; Sq. Hd., 1/2", Pipe Plug; 1/2", Sq. Hd., Straight, Pipe Plug; 1/2" 1/2"-14 Nptf, Pipe Plug; (C: Tractor Serial No.) 1/2", Pipe Plug; 1/2" (Less Heater), Pipe Plug; 1/2", Without Heater, Pipe Plug; (A) 1/2", Pipe Plug; (A: 6068dl070) 1/2" -14npt, Pipe Plug; 1/2" (Sub For 15h237, Appl), Pipe Plug; 1/2" 1/2''-14 Npt, Pipe Plug; 1/2" Sub For 15h697, Pipe Plug; 1/2" 1/2"X 14 Nptf, Pipe Plug; 1/2"-14npt, Pipe Plug; 1/2"-14nptf, Pipe Plug; 1/2" -14 Npt (Sub For 15h624, This Application), Pipe Plug; 1/2" (Use With Re503101), Pipe Plug; 1/2" Sq. Hd., 1/2" (Use With Ar55094), Pipe Plug; 1/2" 1/2"-14npt (Sub For 15h624), Pipe Plug; (A), Pipe Plug; 1/2", (2 Used, With Ae35685) (1 Used, With Ae41328), Pipe Plug; Sq. Hd., 1/2" Park Brake Band And Pin Hole, Pipe Plug; 1/2", (Use With R51039), Pipe Plug; 1/2" (No Temperature Switch), Pipe Plug; 1/2" 3/4"-14 Nptf Use With 15h690, Pipe Plug; 1/2", (2 Used With Ae35685) (1 Used With Ae41328), Pipe Plug; 1/2" 1/2"-14npt (Sub For 15h624, This Application), Pipe Plug; (C: Cut And Tape Wire - Band To Harness) 1/2" Engine Cylinder Head Temperature, (Sub For Re10691), Pipe Plug; 1/2" 1/2''-14npt, Pipe Plug; 1/2", Square Head, Pipe Plug; 1/2" (Sub 15h624), Pipe Plug; 1/2", (Sub Re57836)	1
19***33	Screw; 3/8" X 1-1/2" (Hs Sae 8), Screw; 9.525 X 38.100 mm (3/8" X 1-1/2"), Screw; 3/8" X 1-1/2" Sae 8; Low, Screw; 3/8" X 1-1/2", (Use With Ah66262), Screw; 3/8" X 1-1/2" 3/8 Unc-2a X 1 1/2 A17d Zn, Screw; 3/8" X 1-1/2" 3/8" X 1 1/2", Cap Screw; 3/8" X 1-1/2", Screw; (C: Code 1709 With Air Cleaner Mounting Pad) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" (D), Screw; 3/8"X1-1/2" For, 3179dl013, Screw; (B) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (1 Used L.H.) (1 Used R.H.), Screw; 3/8" X 1-1/2" Torque To 45 Lb-Ft (61 N-M), Screw; (A: Included In Ae48634) 3/8" X 1-1/2" For Use W/L.H. Gage Wheel Only, Screw; 3/8" X 1-1/2", (Use With Re61619), Screw; 9.525 X 38.100 mm, (Sae 8), Screw; 3/8" X 1-1/2" Hs, Sae 8, 3/8" X 1-1/2", Screw, Screw; 3/8" X 1-1/2" (Use With Re500917), Screw; 3/8" X 1-1/2" (A), Screw; (A) (B) 3/8" X 1-1/2" For Long Tooth Pickup Order H78421 Screw., Screw; 3/8" X 1-1/2", (Sae 8), Screw; 3/8" X 1-1/2" Sae 8, Cap Screw; 9.525 X 38.100 mm, Cap Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2" (Hs, Sae 8) (Sub For 19h1116), Screw; 3/8" X 1-1/2" (Dh-01, Dh-02, Gh-01, Gh-02, Hc-D, Hf-G), Screw; 3/8" X 1-1/2", (Use With 15h624), Screw; 3/8" X 1-1/2", (Code 1703), Screw; 3/8" X 1-1/2" (Sae 8), Low, Screw; 3/8" X 1-1/2" (Sae 8), Screw; 3/8" X 1-1/2", Hs, Sae 8, 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (2034), Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2", (Use With E95899), Screw; 3/8"X1-1/2" For, 3179dl004, Screw; 3/8"X1-1/2", (For 3179dl001), Screw; (Sub For R40808 Or R112876, This Application), Screw; Hs, Sae 8, 3/8" X 1-1/2", Cap Screw, Screw; 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2" (Hs, Sae 8), Screw; (Sub For R40808 Or R112876), Screw; 3/8"X1-1/2" (Sub For 19h1765, 19h1800), Screw; 9.525 X 38.100 mm, Screw; 3/8" X 1-1/2", Up, Screw; 3/8" X 1-1/2", (Hd-G), Screw; 3/8"X1-1/2" (Sub For 19h1765), Screw; 3/8" X 1-1/2", (Sub For 19h3385, This Application), Screw; 3/8" X 1-1/2", (Na-D, Na-G, Dn-01, Gn-01), Screw; 3/8" X 1-1/2", (Short Tongue), Screw; 3/8" X 1-1/2", (Gas), Screw; 3/8" X 1-1/2" (913, 915, -64*49, 3 Used) (915, 64*50-, 918, 920, 922, 924, 925, 930, 5 Used), Screw; 3/8" X 1-1/2" 3/8 Unc-2ax1/2 A17d Zn, Screw; 3/8" X 1-1/2", Low, Screw; 3/8" X 1-1/2", (Long Tongue), Screw; 3/8" X 1-1/2" (6081hh010), Screw; 3/8" X 1-1/2", (Ha-G, Ha-D, Ha-L, Hb-G, Hb-D, Hb-L, Hc-G, Na-D, Na-G, Na-L), Screw; 3/8" X 1-1/2" (For Re500917), Screw; 3/8" X 1-1/2" (Short Tongue), Screw; (C: Code 1703 Air Intake Short) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", Full Thread, (Sub For 19h2471), Screw; 3/8" X 1-1/2", For Use W/L.H. Pickup Gage Whl Only, Screw; 3/8" X 1-1/2" (Rigid), Screw; 3/8" X 1-1/2" (Sae 8) , Low, Screw; 3/8" X 1-1/2" (Hs, Sae 8), Screw; 3/8" X 1-1/2", (Hs, Sae 8), Screw; (A) 3/8" X 1-1/2", Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", Screw; 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", (For 3179dl016), Screw; 3/8"X1-1/2", (Sub For 19h1765), Screw; (Sub For R112876 Or R40808, This Application), Screw; 3/8" X 1-1/2", (Sub For T31783, This Application), Screw; 3/8" X 1-1/2", (1708), Screw; 3/8" X 1-1/2" (Long Tongue), Screw; 3/8"X1-1/2", For 3179dl001, Screw; 3/8" X 1-1/2" (Hs=10.9), Sae 8, Screw; 3/8" X 1-1/2" Incld With Engine, Screw; 3/8" X 1-1/2", (1703), Screw; (C) 3/8" X 1-1/2", Screw; 3/8"X1-1/2", For 3179dl016	6
19***93	Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69*00) 9550sh (-69*00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Feed Roll Gear Cases And Idlers Support

03***52	Bolt, Bolt; 5/8"X1-1/2", Bolt; 5/8" X 1-1/2", Bolt; 5/8" X 1-1/2" Lh, Bolt; 5/8" X 1-1/2", (Long), Bolt; 5/8" X 1-1/2" (Use With 14h812)	3
03***36	Bolt; 5/8" X 1-1/4" Rh Front, Bolt; 5/8" X 1-1/4", Bolt; 5/8" X 1-1/4", (Sub 03h1652)	1
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	1
14***31	Nut; (A: 9901 With Temperature And Oil Pressure Gages) (B: 9902 For Enclosure Field) 0.190", Nut; 0.190", Square, Nut; 0.190" (Use With Am53945), Nut; 0.190", (Export), Nut; M6, Nut; N0.10, Nut; (A) No 10, Nut; (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" (Sender), Nut; 0.190", Unf, Nut; (A) 0.190" 0.19", Nut; (A) (B) 0.190", Unf (4 Used Per Module), Nut; (C) 0.190", Nut; 0.190", (Sub For N198083), Nut; (B) 0.190", Nut; 0.190" No. 10 Unf, Nut; 0.190", (English), Nut; (Sub Ar102763) (Also Order 12h295), Nut; 0.190", (2-On Circuit Breaker Terminals, 2-Hold Circuit Breaker To Panel, 1-Motor To Tab On Door), Nut; 0.190" No. 10 (8630, 8640), Nut; No. 10-32, Unf (4 Used Per Module), Nut; No. 10-24, (Sub For Ty4057), Nut; 0.190" (4650, 8430, 8450), Nut; No. 10-24, Nut; No. 10, Unf, Nut; (A) No. 10, Nut; 4.826 mm, Nut; No. 10-32, Unf, Nut; 0.190", Nut; 0.190" (Part Of Re15583), Nut; 4.826 mm (0.190") Unf, Nut; 0.190", (200 Per Package) (Sub For Mg87825), Nut; (A) No.10, Nut; N.10, Nut; (B) No.10, Nut; 0.190" (Sub For 14h778, This Application), Nut; 0.190" 5/16", Nut; 10-24, Nut; (B: With Cab) 0.190", Nut; 0.190", (10 Used Syncro-Range) (11 Used Power Shift), Nut; 0.190", No.10, Nut; 0.190", (Sub For Ty4057), Nut; Unf No 10, Nut; 4.826 mm (0.190") No. 10, Nut; 0.190", Unf (With Iron-Gard), Nut; Hex, 10-24, Nut; No 10, Nut; 0.190", Machine Screw, Nut; (A) 0.190", Unf, Nut; 0.190", (16 Used With Cab) (24 Used With Air Conditioning), Nut; 0.190", For Units And Auger Shaft, Nut; 0.190", (A), Nut; (B: Also Includes Sn:) 0.190", Nut; 0.190", (Use With Re41759) (3011, 3016), Nut; 0.190", (2 Used Gasoline And Lp Gas) (3 Used Diesel), Nut; 0.190", (Starter Motor Solenoid Terminal), Nut; 0.190", Germany, Nut; 0.190" (4640, 4650, 4840, 8430, 8450), Nut; No 10, Ar, Nut; 0,190", Nut, Nut; 0.190", 200 Per Package, Nut; 0.190", North America, Nut; 0.190" (Also Order 12m7060), Nut; 0.190" (19 W/ Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 4.826 mm (0.190"), Nut; (A) 0.190", Nut; 0.190", (2 Used Gasoline And Lp-Gas) (3 Used Diesel), Nut; 0.190" (20 W/Sgb) (17 W/O Sgb), Nut; No. 10, Nut; No.10, Nut; (A: If Equipped) 0.190", Nut; (A), Nut; (A) No. 10-32, Unf, Nut; 0.190", (Use With Code 7201), Nut; 0.190", Unf, (2) Furnished With Additional Function, Nut; (A) (B) 0.190", Nut; (A: 3201 Panel Gages Sp Cntrl) (B: 3202 Panel Gages Sp Cntrl) (C: 3208 Panel Gages Sp Cntrl) 0.190", Nut; 0.190", Lock, Nut; 0.190", Df, Tf, Af, Nut; 0.190", (Sub For Ar102763), Nut; 0.190", All Other European Countries, Nut, Nut; 0.190", Not Used This Application, Nut; 0.190" (For Ar56671), Nut; (A) (B) No. 10-32, Unf, Nut; 0.190" (4050), Nut; 4.826 mm (0.190") No. 10 (8630, 8640), Nut; (K) 0.190", Nut; 0.190" (A), Nut; (A) (B) (C) 0.190", Nut; 0.190", 200 Per Package, (Sub For Mg87825), Nut; 4.826 mm, Nut; 0.190", (Gasoline), Nut; 0.190" (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" 0.190", Nut; 0.190", No. 10, Nut; 0.190" (19 W/Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 0.190", (Use With Ar11109 Or Ar11116), Nut; (A: With Intelliguard) 0.190", Nut; 0.190" (Sub Ar102763) (Also Order 12h295), Nut; 0.190", Nut; 0.190", Not Applicable, Nut; 0.190" (Use With At100083 And At100084), Nut; (C: Sgb (53***01-)) 0.190", Nut; 0.190" (10-32 Unf), Nut; 0.190" (Use With Re207840)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Feed Roll Stop Gears And Pawls (With Intelliguard)

11***94	Cotter Pin; 1.600 X 16 mm, (Sub For T110417), Cotter Pin; (A: Range Shift Lever On L.H. Side And Gear Shift Lever On R.H. Side) 1.600 X 16 mm, Cotter Pin, Cotter Pin; 1.600 X 16 mm (Sub For T110417), Cotter Pin; (C: 2 Used With 2 Spool Valve; 3 Used With 3 Spool Valve) 1.600 X 16 mm, Cotter Pin; (A: From Sr.No.5310s(00*84-Xxxxxx), 5410(00*19-Xxxxxx)) 1.600 X 16 mm, Cotter Pin; 1.600 X 16 mm 2.5 X 16mm, Cotter Pin; (C: 2 Used On 2-Spool Valve, 3 Used On 3-Spool Valve) 1.600 X 16 mm, Cotter Pin; 1.600 X 16 mm, (Sub For Ch12313), Cotter Pin; 1.600 X 16 mm, Cotter Pin; 1.600 X 16 mm (Sub For Ch12313), Cotter Pin; (A) 1.600 X 16 mm, Cotter Pin; (C) 1.600 X 16 mm, Cotter Pin; (C: 2 Used For 2 Spool Loader Valve; 3 Used For 3 Spool Loader Valve) 1.600 X 16 mm, Cotter Pin; (A: 2 Used With 2 Spool Control Valve; 3 Used With 3 Spool Control Valve) 1.600 X 16 mm, Cotter Pin; (B) 1.600 X 16 mm, Cotter Pin; M2 X 10	1
14***49	Nut; 6.350 mm (1/4"), Nut; (A) 1/4", Nut; 0,25", Nut; 1/4" 1/4", Nut, Nut; (A) (B) 1/4", Nut; (B) 1/4", Nut; (A: ( -Xxxxxx)8570-00*91;8770-0047;8870-0027) 1/4", Nut; (A: ( -Xxxxxx) 7600-0014; 7700-0079; 7800-0035) 1/4", Nut; 1/4" Incld In 14, Nut; (A) (B) 1/4", Unf, Nut; (A) 1/4", Unf, Nut; 6.350 mm (1/4") Jam, Unf, Nut; (C: ( -Xxxxxx) 8560-0030; 8760-00*21) 1/4", Nut; 1/4", Nut; 1/4", Unf, Jam, Nut; 1/4", Jam Unf., Nut; (C) 1/4", Nut; 1/4", Nut, Nut; M6,35, Nut; 1/4", Unf, Nut; 1/4" (A)	1
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	2
19***48	Bolt; 1/4" X 3/4", Right-Hand, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle - 2 Used) (Bucket - 54 Used), Bolt; (B) 1/4" X 3/4", Bolt; 1/4" X 3/4", Bolt; 1/4" X 3/4", Hs, Sae 8, Bolt; (A: Install In 1 Select. Control Valve) 1/4" X 3/4", Bolt; 1/4" X 3/4" (To Transmission Sight Tube Bracket), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Bolt; 1/4" X 3/4", (Europe), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 66 Used), Bolt; 1/4" X 3/4", Not Used This Application, Cap Screw; 1/4" X 3/4", Bolt; 1/4" X 3/4", (84 Used For 714, 714a; 98 Used For 716, 716a), Bolt; 1/4"X3/4", Bolt; 1/4' X 3/4", Bolt; 1/4" X 3/4", (Use With Gd1072), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; (A) 1/4" X 3/4", Bolt; 1/4" X 3/4", Europe, Bolt; 1/4" X 3/4" (Use With 14h786 And 24h1286), Bolt; 1/4" X 3/4", (Sub For Mg88573), Bolt; 1/4" X 3/4" 1/4 X 3/4, Bolt; 1/4" X 3/4" (Sub For 19h1919, This Application), Bolt; 1/4" X 3/4" (A), (B), Bolt; 1/4" X 3/4", Sweden Only, Bolt; 1/4" X 3/4", (Sub For Hmx03107), Bolt; 1/4" X 3/4", (Use With 12h302 And 14h786), Bolt; (A: 6076trw07 Only) 1/4" X 3/4", Bolt; 1/4" X 3/4", 7000 Flex-Fold And 7100 Integral Planters Only, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle-2 Used; Bucket-96 Used), Bolt; 1/4" X 3/4" (Use With 14h786), Bolt; 1/4" X 3/4", Herbicide Only, Bolt; 1/4" X 3/4", (Not Used W/E55662), Bolt; 1/4"X3/4, (Use With Ar91662, Re30685), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used), Bolt; 1/4"X3/4 (For Ar91662, Re30685), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4" (911), Bolt; 1/4" X 3/4" (A), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle), Cap Screw, Bolt; (A: ( -Xxxxxx) 8560-00*03; 8760-0051; 8960-00**14) 1/4" X 3/4", Bolt; (Use With Pt17843 Windowpane), Bolt; 1/4" X 3/4" Amber, Bolt; 1/4" X 3/4", (4402,4403), Bolt; 1/4" X 3/4", Amber, Bolt; (C) 1/4" X 3/4", Bolt; 1/4" X 3/4", 28" Rows Only, Bolt, Bolt; 1/4" X 3/4" (Sub For At216052), Bolt; 1/4" X 3/4", Germany And Italy, Bolt; 6.350 X 19.050 mm, Bolt; 1/4" X 3/4", (4408,4409), Bolt; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4" X 3/4", Bolt; (A) 1/4"X3/4", Bolt; 1/4" X 3/4", Small Hopper, Bolt; X 1/4" X 3/4", Bolt; 1/4" X 3/4" 1/4" X 0.75" (Sub For R138749), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle), Bolt; 1/4" X 3/4" (Europe), Bolt; 1/4" X 3/4", (56 Used For 714, 714a; 64 Used For 716, 716a), Bolt; 1/4" X 3/4", (Code 1637), Bolt; 1/4" X 3/4" (Not Illustrated), Cap Screw; 6.350 X 19.050 mm, Bolt; (A) R.Bosch,1/4"X3/4", Bolt; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4" X 3/4", Bolt; 1/4" X 3/4", (4402-4403), Bolt; 1/4" X 3/4" 1/4 X 3/4", Bolt; (A) 6.350 X 19.050 mm (1/4" X 3/4"), Cap Screw; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Bolt; 1/4" X 3/4" (4408-4409), Bolt; 1/4" X 3/4", ((3) Less Cab) ((2) Cab), Bolt; 1/4" X 3/4" For Steel Cleaning Paddles, Bolt; 1/4" X 3/4", ((3) Used Less Cab, (2) Used With Cab), Bolt; (C) (D) 1/4" X 3/4", Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Bolt; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4" (For Az100822), Bolt; 1/4" X 3/4" (8630), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 96 Used), Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used)	6

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Harvesting Unit Drive Idler

03***58	Bolt; (A) 5/8" X 3-1/4", Bolt; 5/8" X 3-1/4", Bolt; 5/8" X 3-1/4" (Use With 14h1039)	1
12***69	Lock Washer; (A) (B) 16 mm, Lock Washer; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 16 mm, Lock Washer, Lock Washer; 16 mm (Sub For Er022864 Appl), Lock Washer; 16 mm 16 Gb/T 93-1987 Zn.D, Lock Washer; (A), Lock Washer; (Sub For Ffsb109363), Lock Washer; 16 mm 320/90-R50 R1 10pr R&P, Lock Washer; (Sub For Ffsb109992), Lock Washer; (A) (C) (D) 16 mm, Lock Washer; 16 mm, (Sub For Ffsb109363 And J252216), Lock Washer; 16 mm 2109, 2111, 2113, 2122, 2126, Lock Washer; M16, Lock Washer; 16 mm, (Sub For Ffsb109363), Lock Washer; (312) 16mm, Lock Washer; 16 mm 16mm, Lock Washer; (D: With Wheel W18x38) 16 mm, Lock Washer; (C), Lock Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 16 mm (Sub For 12h294), Lock Washer; 16 mm, (Sub For Ffsb109992), Lock Washer; 16 , 27,4 X 3,5 mm, Lock Washer; 16 X 27,4 X 3,5 mm, Lock Washer; 16 mm, Lock Washer; (E) 16 mm, Lock Washer; (B: With Rops) 16 mm (Sub For Er022864 Appl), Lock Washer; (B: With Rops) 16 mm (Sub For Er022864, Appl), Lock Washer; 16 mm (B), Lock Washer; 16 mm With More Than 8 Weights, Lock Washer; 5/8", Lock Washer; 16 mm (0.630"), Lock Washer; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too), Lock Washer; (A: 42" X 7.5") (B: 40" X 7.5") 16 mm, Lock Washer; (A) 16 mm, Lock Washer; 16 mm M16, Lock Washer; 16 mm, Lock Washer; 16 mm (Sub For Er022864, Appl), Lock Washer; 16 mm, (Sub For J252216), Lock Washer; 16mm, Lock Washer; B16, Lock Washer; (Sub For J252216), Lock Washer; (A: Counter Weight - 2) (B: Counter Weight - 4) (C: Counter Weight - 6) 16 mm, Lock Washer; 16 mm, (Sub For Ffsb106133), Lock Washer; (E: With Wheel Dw10x50) 16 mm, Lock Washer; 16 mm, (950, 1050 Tractor), Lock Washer; 16.200 mm, Lock Washer; (A: Included In Ae48634) 16 mm	2
24***68	Washer; 21/32" X 1-5/16" X 0.090", 9-Inch Only, Washer; 21/32" X 1-5/16" X 0.090", (On Base Unit), Washer; 21/32" X 1-5/16" X 0.090", Either Side Of Sheave For Alignment, Washer; 21/32" X 1-5/16" X 0.090", For 790 Rear, Washer; 21/32" X 1-5/16" X 0.090", (8 Nominal), Washer; 21/32" X 1-5/16" X 0.090", 8-Row Wide, Washer; (A: Dubuque (To) Esn -74*89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; (A: Dubuque (T0) Esn -7489) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Washer; (A) 21/32"X1-5/16"X.090", Washer; .090" X 21/32" X 15/16", Washer; 21/32" X 1-5/16" X 0.090" 3 Each Maximum, Used On E93102, Washer; 21/32" X 1-5/16" X 0.090", (Sub For E14416, This Application), Washer; 21/32" X 1-5/16" X 0.090" 21/32" X 1-5/16" X 0.090", Washer; 21/32"X1-1/16", Washer; 21/32" X 1-5/16" X 0.090", 12-Row Narrow, Washer; (B) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X .090", Washer; 21/32" X 1-5/16" X 0.090", Rear, For 79, Washer; 21/32x1-1/16", Washer; 21/32" X 1-5/16" X 0.090", (Use With 08h4073), Washer; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 16.662 X 33.325 X 2.286 mm (21/32" X 1-5/16" X 0.090"), Washer; (A) (B) (C) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", R.H., Washer; 21/32" X 1-5/16" X 0.090", (Rs), Washer; 21/32" X 1-5/16" X 0.090", 230 mm (9") Only, Washer; .090 X 21/32 X 1-5/16zn, Washer; 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Sub For E14416), Washer; 21/32" X 1-5/16" X 0.090", (203 cm-259 cm (80"-102") Axle), Washer; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Sub For Mg87365), Washer; 21/32" X 1-5/16" X 0.090", (No Longer Available), Washer; 21/32" X 1-5/16" X 0.090" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925-8 Used; 930-10 Used; And 930 Flex Arg-1 Used), Washer; (C) 21/32" X 1-5/16" X 0.090", Washer; (E) (A) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" (8 Nominal), Washer; (A: Outer Wing Caster Wheel Spring Brake For 52 Ft Machine Only.) 21/32" X 1-5/16" X 0.090", Washer; 21/32"X1-5/16"X.090", Washer; 16.662 X 33.325 X 2.286 mm, Washer; 21/32" X 1-5/16" X 0.090", 8-Row Wide And 10-Row Narrow, Washer; 21/32" X 1-5/16" X 0.090" 5/8", (Sub For Mg87365), Washer; 21/32" X 1-5/16" X 0.090" (Sub For E14416), Washer; (A) (C) 21/32" X 1-5/16" X 0.090", Washer; (A) 21/32" X 1-5/16" X 0.090", (8 Nominal), Washer; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 21/32" X 1-5/16" X 0.090", Washer; (A) (D) (E) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" R.H., Washer; 21/32" X 1-5/16" X 0.090" 8-Row, 36-, 38- And 40-In.; 10-Row, 30-In., Washer; (B: Dubuque (T0) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Not Included In Kit) (Sub For Mg87365), Washer; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Use Without Rops), Washer; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" 15 Ft, Washer; (D) 21/32" X 1-5/16" X 0.090", Washer; (B: Dubuque (T0) Esn 74**90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; (D) (E) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Without Rops), Washer; (B) (C) (D) 21/32" X 1-5/16" X 0.090", Washer; (A) (B) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-3/8" X .105", Washer, Washer; 21/32" X 1-5/16" X 0.090" 3 Max On Each Tooth Bar, Washers Not Needed W/Longer Boss, Washer; (A) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090"	0
A2***48	Nut; (Use With N234741), Nut; 15.875 mm (5/8"), Nut; 15.875 mm, Nut, Nut; 5/8", Nut; (Flange), Nut; 15.875 mm Model 12w, 16n, 18nn, 24nn-20 And 24nn-22 (Hydraulic Toolbar Assembly), Nut; 15.875 mm Flange, Nut; 5/8", (Sub 14h1039 And 24m7241), Nut; 15.875 mm (Sub 14h1039 And 24m7241), Nut; 5 X 7 And 7 X 7 Frame, Nut; (A: Coded Items Are Used Together) 15.875 mm Model 12w And 16n, (Hydraulic Toolbar Assembly)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Lower Feed Roll Drive Slip Clutch

24***49	Washer; (A) 30 mm (Sub For 24m3533), Washer; 1-9/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X 0.060", With Iron-Gard, Washer; 1-9/32" X 1-11/16" X 0.060", Washer; 19/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X .060", Washer; 1-9/32" X 1-11/16" X 0.060" Without Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060" With Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060", (3 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", (2 Used Nominal, With Iron-Gard) (5 Used Nominal, Less Iron-Gard), Washer; (A: Option) 1-9/32" X 1-11/16" X 0.060", Washer; 1-9/32" X 1-11/16" X 0.060", (2 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", Without Iron-Gard, Washer	4
28***26	Bushing; (Sub 28h3268, This Application), Bushing; (Sub E76647), Bushing; 1.278" X 1.660" X 11/16"	1
AA***27	Quick Lock Pin; (A) (Sub For Ae45567), Quick Lock Pin; (Sub Ar62149, This Application), Quick Lock Pin, Quick Lock Pin; (Sub For Ae45567), Quick Lock Pin; (Sub For Ae45567) (A), Quick Lock Pin; 28'7" - 37'10", Quick Lock Pin; (Sub Ar62149)	1
AE***17	Slip Clutch, Slip Clutch; Assembly, Low	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Lower Feedroll Direct Drive (Less Intelliguard)

24***49	Washer; (A) 30 mm (Sub For 24m3533), Washer; 1-9/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X 0.060", With Iron-Gard, Washer; 1-9/32" X 1-11/16" X 0.060", Washer; 19/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X .060", Washer; 1-9/32" X 1-11/16" X 0.060" Without Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060" With Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060", (3 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", (2 Used Nominal, With Iron-Gard) (5 Used Nominal, Less Iron-Gard), Washer; (A: Option) 1-9/32" X 1-11/16" X 0.060", Washer; 1-9/32" X 1-11/16" X 0.060", (2 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", Without Iron-Gard, Washer	5
AA***27	Quick Lock Pin; (A) (Sub For Ae45567), Quick Lock Pin; (Sub Ar62149, This Application), Quick Lock Pin, Quick Lock Pin; (Sub For Ae45567), Quick Lock Pin; (Sub For Ae45567) (A), Quick Lock Pin; 28'7" - 37'10", Quick Lock Pin; (Sub Ar62149)	1
AE***69	Chain Sprocket; (24-Tooth), Chain Sprocket; 24 Tooth, Chain Sprocket; Z =24	1
E7***47	Spacer	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Powershaft And Reverse Grind Shaft

03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	0
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2
19***41	Cap Screw; 5/8" X 3-1/4" (Sae 8) (For R122201, R128399), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8) (With Cab), Cap Screw; 5/8" X 3-1/4", (540 Or 1000 Rpm), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (17 X 7 And 20 X 6 Disk) (9 X 14 And 12 X 10 Hoe), Cap Screw; 5/8" X 3-1/4", Cap Screw; 5/8" X 3-1/4" (Sae 8), For R122201, R128399, Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8) (4 Used, 53 Thru 59-Foot Machine), Cap Screw; (C) (D) (E) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8), (For 25 Thru 27-Foot Models Only), Cap Screw; 5/8" X 3-1/4" 5/8"X3" (Sub For 19h1863), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8 ), Cap Screw, Cap Screw; (B) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; (A) 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 15.875 X 82.550 mm, Cap Screw; 5/8" X 3-1/4" (Sub For 19h1863), Cap Screw; 15.875 X 82.550 mm (5/8" X 3-1/4"), Cap Screw; 5/8" X 2-3/4" (Sub For R64802 Appl), Cap Screw; (A) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" 15.875x76.200mm (Sub For 19h1863), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (3 And 4 Unit), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4" Hs, Sae 8, 5/8" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (4-7 Ft., 8-11 Ft.), Cap Screw; 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4", Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4" Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" Install Using Loctite 271 And Primer Torque (Lub) 160 Lb-Ft (215 N-M), Cap Screw; 5/8" X 3-1/4" (Sae 8), Cap Screw; 5/8"X2-3/4" (Sub For R64802 Appl), Cap Screw; 5/8" X 3-1/4" (Sae 8, For R122201, R128399), Cap Screw; 5/8"X3-1/4"	2
24***59	Washer; 1-11/16" X 2-5/16" X 0.048"	5

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Tractor Pto Telescoping Hookup (Grobe Spline)(1000 Rpm - Cat. 5 - 35 Mm (1-3/8") Shaft)

AC***78	Cross And Bearing As; With Snap Ring, Cross And Bearing As; (B: For 1000 Rpm), Cross And Bearing As, Cross And Bearing As; (Category No. 5 Power Take-Off), Cross And Bearing As; (A: For 540 Rpm (Ball Joint)) (B: For 1000 Rpm (Ball Joint)), Cross And Bearing As; (B), Cross And Bearing As; (Sub For C19624), Cross And Bearing As; (540 Or 1000 Rpm), Cross And Bearing As; Includes Snap Ring, Cross And Bearing As; (Category No. 5 Power Take-Off) (540 Or 1000 Rpm), Cross And Bearing As; (Category No. 5 Power Take-Off) (540 Or 1000 Rpm) (Sub For C19624), Cross And Bearing As; (A) (B)	2
AE***70	Yoke With Shaft, Yoke With Shaft; Splined, (Sub For Ae46904), Yoke With Shaft; (Sub For Ae46904)	1
AE***71	Yoke With Tube, Yoke With Tube; (Sub For Ae46905), Yoke With Tube; Splined, (Sub For Ae46905)	1
AE***73	Kit; Slide-Lock Repair (Includes Parts Marked (A)), Kit; (Use With Ae50407 Or Dc203052)Slide Lock, Kit; Safety Slide Lock Repair Includes Parts Marked (A) For 1-3/8 In 21 Spline Slide Lock, (Sub For Am100014), Kit; (Use With Ae50060) Slide Lock Collar; Includes Parts Marked (A), Kit; Includes Parts Marked (B) For 1 3/8" 21 Spline Slide Lock, Kit; For 1 3/8" 21 Spline, Kit; (Use With Ae54848) 1-3/8, Kit; Safety Slide Lock Repair (For 1-3/8"-21 Spline Slide Lock) (Sub For Am100014), Kit; (A: For 540 Rpm) (B: For 1000 Rpm), Kit; (A: For 540 Rpm (Ball Joint)) (B: For 1000 Rpm (Ball Joint)), Kit; 1-3/8 In. Auto Lock, Kit; Retaining, (Sub For M82068), Kit; For 1-3/8"-21 Spline Slide Lock, Kit; Ae54916 Yoke Repair, Kit; 540 Rpm; 1.38 - 1000 Rpm, Kit; (Use With Ae50407 Or Dc203052) Slide Lock, Kit; No.9 X 3/4", Kit; 1-3/8, Kit; Slide Lock Collar, Kit; (A) (B), Kit; For 1 3/8" 21 Spline Slide Lock, Kit; Locking Collar Repair, Kit; Slide Lock, Kit, Kit; (Sub For Am100014), Kit; Yoke Repair For Ae54916, Kit; (Use With Ae50060) Includes Parts Marked (A); Slide Lock Collar, Kit; 540 Or 1000 Sliding Collar, Kit; For 1-3/8" 21 Spline, Kit; (B) (C) 540 Or 1000 Sliding Collar, Kit; (Includes Parts Marked (A) Above), Kit; (Sub For Am100014) Safety Slide Lock Repair For 1-3/8" - 21 Spline Slide Lock, Kit; For 1 3/8" 21 Spline Slide Lock, Includes Parts Marked (B)	2

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Tractor Pto Telescoping Hookup (Grobe Spline)(1000 Rpm- Cat. 5 - 35 Mm (1-3/8") Shaft)

AC***78	Cross And Bearing As; With Snap Ring, Cross And Bearing As; (B: For 1000 Rpm), Cross And Bearing As, Cross And Bearing As; (Category No. 5 Power Take-Off), Cross And Bearing As; (A: For 540 Rpm (Ball Joint)) (B: For 1000 Rpm (Ball Joint)), Cross And Bearing As; (B), Cross And Bearing As; (Sub For C19624), Cross And Bearing As; (540 Or 1000 Rpm), Cross And Bearing As; Includes Snap Ring, Cross And Bearing As; (Category No. 5 Power Take-Off) (540 Or 1000 Rpm), Cross And Bearing As; (Category No. 5 Power Take-Off) (540 Or 1000 Rpm) (Sub For C19624), Cross And Bearing As; (A) (B)	2
AE***68	Powershaft Shield; (Sub Ae73512 And Ae73513) Outer; Steel, Powershaft Shield; (Sub Ae73512 And Ae73513) Outer (Steel), Powershaft Shield; (Sub Ae73512 And Ae73513)Outer, Steel	1
AE***69	Powershaft Shield; (Sub Ae73512 And Ae73513)Inner - Steel, Powershaft Shield; (Sub Ae73512 And Ae73513) Inner; Steel, Powershaft Shield; (Sub Ae73512 And Ae73513) Inner (Steel)	1
AE***70	Yoke With Shaft, Yoke With Shaft; Splined, (Sub For Ae46904), Yoke With Shaft; (Sub For Ae46904)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Upper Feed Roll Drive Shear Bolt Hub (Less Intelliguard)

11***92	Cotter Pin; 3.200 X 40 mm, (Sub For 11h234), Cotter Pin; 3.200 X 40 mm, Cotter Pin; 3.200 X 40 mm, Cotter Pin; 3.200 X 40 mm, (Power Axle), Cotter Pin; 3x40mm (Sub For 11h224), Cotter Pin; 3.200 X 40 mm, (Power Rear Wheel Drive), Cotter Pin	1
19***05	Cap Screw; (A: - Xxxxxx 467( - 31*00) 567( - 3150) 467s( - 3100)) 5/16" X 1" (1000 Rpm), Cap Screw; 5/16" X 1", Cap Screw; 7.925 X 25.400 mm, Cap Screw; (For (4) 24h1243), Cap Screw; 5/16" X 1" Rh, Cap Screw; 5/16" X 1", (Use With P50677), Cap Screw; 5/16" X 1", Hs, Sae 8, Cap Screw; 5/16"X1", Cap Screw; 5/16" X 1" (Hs, Sae 8) (Sub For R132456), Cap Screw; 5/16" X 1", (Hs, Sae 8)(Gas), Cap Screw; (A: - Xxxxxx 457( - 3100) 557( - 3150) 457s( - 31*00)) 5/16" X 1" (1000 Rpm), Cap Screw; 5/16" X 1", (Sub For Ffsb114668), Cap Screw; 5/16" X 1" (Hs, Sae 8), Cap Screw, Cap Screw; 5/16" X 1", (Use With Alternator Shield), Cap Screw; 5/16" X 1" (Hs, Sae 8) (Sub For Aw24189), Cap Screw; 5/16" X 1", (With Alternator Shield), Cap Screw; 5/16" X 1", Included In Ae53225 Lower Paddle Auger Kit; See Kit On Auger, Cap Screw; (A), Cap Screw; 5/16" X 1", (Dh-03, Gh-01), Cap Screw; (A) 5/16" X 1", (1000 Rpm), Cap Screw; 5/16" X 1", (Motorola), Cap Screw; 7.925 X 25.400 mm (5/16" X 1"), Cap Screw; 5/16" X 1" (Sub For N167650, This Application), Cap Screw; 7.925 X 25.400 mm (5/16" X 1") (Hs, Sae 8)	1
19***31	Cap Screw; 5/16" X 2", Cap Screw; 5/16" X 2", (Sub 19h3636, This Appl.), Cap Screw; 5/16" X 2" (Sub 19h3636, This Application), Cap Screw; 5/16" X 2", Cap Screw; 5/16" X 2", (Sub 19h3636, This Application), Cap Screw; 5/16" X 2", Hs, Sae 8,, Cap Screw; For 3179dl007, Cap Screw; For 3179dl001, Cap Screw; For 3179dl016, Cap Screw, Cap Screw; For 3179dl005, Cap Screw; 5/16" X 2" (Hs, Sae 8), Cap Screw; For 3179dl015, Cap Screw; 5/16" X 2", Hs, Sae 8, (1000 Rpm), Cap Screw; 5/16"X2", Cap Screw; 5/16" X 2", (Sae 8), Cap Screw; 5/16" X 2" (Sae 8), Cap Screw; (A) 5/16"X2", Cap Screw; For 3179dl014, Cap Screw; 5/16" X 2" Hs, Sae 8, Cap Screw; 5/16" X 2", Hs, Sae 8 (Shear Bolt Storage Location) (1000 Rpm Shear Coupler) (Furnished In Kits Ae53856 And Ae53857), Cap Screw; 5/16" X 2", (Hs, Sae 8), Cap Screw; 5/16" X 2", Hs, Sae 8, (1000 Rpm) (Furnished In Kits Ae53856 And Ae53857), Cap Screw; 5/16" X 2", Hs, Sae 8, (Shear Bolt Storage Location, 1000 Rpm Shear Coupler And Upper Feed Roll Drive Joint), Cap Screw; 5/16" X 2", Hs, Sae 8	1
24***49	Washer; (A) 30 mm (Sub For 24m3533), Washer; 1-9/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X 0.060", With Iron-Gard, Washer; 1-9/32" X 1-11/16" X 0.060", Washer; 19/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X .060", Washer; 1-9/32" X 1-11/16" X 0.060" Without Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060" With Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060", (3 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", (2 Used Nominal, With Iron-Gard) (5 Used Nominal, Less Iron-Gard), Washer; (A: Option) 1-9/32" X 1-11/16" X 0.060", Washer; 1-9/32" X 1-11/16" X 0.060", (2 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", Without Iron-Gard, Washer	4

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Upper Feed Roll Drive Slip Clutch

19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	6
24***49	Washer; (A) 30 mm (Sub For 24m3533), Washer; 1-9/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X 0.060", With Iron-Gard, Washer; 1-9/32" X 1-11/16" X 0.060", Washer; 19/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X .060", Washer; 1-9/32" X 1-11/16" X 0.060" Without Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060" With Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060", (3 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", (2 Used Nominal, With Iron-Gard) (5 Used Nominal, Less Iron-Gard), Washer; (A: Option) 1-9/32" X 1-11/16" X 0.060", Washer; 1-9/32" X 1-11/16" X 0.060", (2 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", Without Iron-Gard, Washer	4
AE***94	Slip Clutch; Assembly, Up, Slip Clutch; Lh, Slip Clutch, Slip Clutch; L.H.	1
AE***63	Retainer; Assembly, Retainer, Retainer; Includes Ring, Two 5 X 12 Pins And Four 8 X 24 Pins	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Upper Feed Roll Drive Slip Clutch Conversion Kit (With Or Without Intelliguard)

12***97	Part Missing In Wise; 1/4" (F), Part Missing In Wise; 1/4", (Export), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; (A: For 9650 ( -69*00) & 9750 ( -6900)) 1/4", Part Missing In Wise; 1/4" (Tractor S/N -C225019), Part Missing In Wise; (A: For 9650 (6901- ) & 9750 (6901- )) 1/4", Part Missing In Wise; 1/4" (Tractor S/N S245017-), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (Nlr), Part Missing In Wise; 1/4" (Tractor S/N S236761-), Part Missing In Wise; 1/4" (Tractor S/N C234698-), Part Missing In Wise; 6.350 mm (1/4"), Lock Washer; 1/4", Part Missing In Wise; 1/4" (Tractor S/N C225020-), Part Missing In Wise; 1/4" (Tractor S/N -C234697), Part Missing In Wise; (A: For 9650 ( -6900) & 9750 ( -6900)) 1/4", Part Missing In Wise; (D) 1/4", Part Missing In Wise; 1/4", (Less Germany, France And Italy), Part Missing In Wise; Internal-Tooth 1/4", Part Missing In Wise; (B), Part Missing In Wise; 1/4", (Sub For R31578), Part Missing In Wise; 6.350 mm, Part Missing In Wise; Internal-Tooth, 1/4", Lock Washer, Part Missing In Wise; (A) 1/4", Part Missing In Wise; 1/4", (Nla), Part Missing In Wise; (B: Use With Ar93448) 1/4", Part Missing In Wise; (D) 1/4", Internal Tooth, Part Missing In Wise; 1/4" (Sub For 12h356), Part Missing In Wise; 6.350 mm (1/4") Internal Tooth, Part Missing In Wise; Internal Tooth, 1/4", Part Missing In Wise; (Sub For U12172), Part Missing In Wise; (A: See Your Authorized Repair Station For Parts Not Listed) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; (D), Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4" (Tractor S/N -S245016), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; 1/4", Part Missing In Wise, Part Missing In Wise; (A: For 9650 (6901- ) & 9750 (69*01- )) 1/4", Part Missing In Wise; 1/4", Internal-Tooth, Part Missing In Wise; 1/4" Incld In 14, Part Missing In Wise; 1/4", Internal Tooth, Part Missing In Wise; 1/4", (Nlr), Part Missing In Wise; 1/4", (Or), Part Missing In Wise; 1/4", Sp, Part Missing In Wise; 1/4" (Tractor S/N -S236760), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448)	1
19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	6
24***49	Washer; (A) 30 mm (Sub For 24m3533), Washer; 1-9/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X 0.060", With Iron-Gard, Washer; 1-9/32" X 1-11/16" X 0.060", Washer; 19/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X .060", Washer; 1-9/32" X 1-11/16" X 0.060" Without Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060" With Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060", (3 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", (2 Used Nominal, With Iron-Gard) (5 Used Nominal, Less Iron-Gard), Washer; (A: Option) 1-9/32" X 1-11/16" X 0.060", Washer; 1-9/32" X 1-11/16" X 0.060", (2 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", Without Iron-Gard, Washer	3
AE***67	Gear Case; (Includes Keys 12, 14, And 16) (Marked E73289), Gear Case; (Sub For Ae35687), Gear Case, Gear Case; (Marked E73289) (Includes Keys 8, 10, And 12), Gear Case; (Includes Keys 8, 10, And 12) (Marked E73289), Gear Case; (Includes Keys 8, 10 And 12) (Marked E73289)	1

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Universal Joint Shear Coupler - Weasler

19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	1
19***31	Cap Screw; 5/16" X 2", Cap Screw; 5/16" X 2", (Sub 19h3636, This Appl.), Cap Screw; 5/16" X 2" (Sub 19h3636, This Application), Cap Screw; 5/16" X 2", Cap Screw; 5/16" X 2", (Sub 19h3636, This Application), Cap Screw; 5/16" X 2", Hs, Sae 8,, Cap Screw; For 3179dl007, Cap Screw; For 3179dl001, Cap Screw; For 3179dl016, Cap Screw, Cap Screw; For 3179dl005, Cap Screw; 5/16" X 2" (Hs, Sae 8), Cap Screw; For 3179dl015, Cap Screw; 5/16" X 2", Hs, Sae 8, (1000 Rpm), Cap Screw; 5/16"X2", Cap Screw; 5/16" X 2", (Sae 8), Cap Screw; 5/16" X 2" (Sae 8), Cap Screw; (A) 5/16"X2", Cap Screw; For 3179dl014, Cap Screw; 5/16" X 2" Hs, Sae 8, Cap Screw; 5/16" X 2", Hs, Sae 8 (Shear Bolt Storage Location) (1000 Rpm Shear Coupler) (Furnished In Kits Ae53856 And Ae53857), Cap Screw; 5/16" X 2", (Hs, Sae 8), Cap Screw; 5/16" X 2", Hs, Sae 8, (1000 Rpm) (Furnished In Kits Ae53856 And Ae53857), Cap Screw; 5/16" X 2", Hs, Sae 8, (Shear Bolt Storage Location, 1000 Rpm Shear Coupler And Upper Feed Roll Drive Joint), Cap Screw; 5/16" X 2", Hs, Sae 8	2
34***41	Spring Pin; (E) 5/16" X 3", Spring Pin; 5/16" X 3"	1
4***R	Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00*50; 4250-0080; 4450-0186), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 0118), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-0068; 4250-0190; 4450-0227), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-0110; 4850-0138), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-0056; 4850-0028), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 0118), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-0020; 4760-0078; 4960-0005), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-0111; 4850-0139), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01*51-))	31

See all parts with full part numbers in Heavy Parts AI →

John Deere : 3955 - Harvester, Ensilage And Forage : Powershaft And Gearcase : Upper And Lower Feed Drive

19***31	Cap Screw; 3/8" X 2-1/2", Lower, Cap Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; (D) 3/8" X 2-1/2" (Hs, Sae 8) (28'-7" Through 32'-1"), Cap Screw; 3/8" X 2-1/2" (Up), Cap Screw; (Sub For E39787), Cap Screw; 3/8" X 2-1/2" Sub For 19h268, Cap Screw; 3/8" X 2-1/2" (For Re500934), Cap Screw; 3/8" X 2-1/2" Lh, Cap Screw; 3/8" X 2-1/2" Low, Cap Screw; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", Low, Cap Screw; 3/8" X 2-1/2" (Sub For Mg280259), Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Re57603), Cap Screw; 3/8" X 2-1/2" (Sae 8), Cap Screw; 3/8" X 2-1/2" (34 Harvester), Cap Screw; 3/8" X 2-1/2" (Use With Re31973 And R42729), Cap Screw; 3/8"-16uncx2-1/2" (Ord T15634, 19h3631), Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8) (Use With T20315), Cap Screw; 3/8" X 2-1/2" Sae 8, Cap Screw; 3/8" X 2-1/2" Lower, Cap Screw; (B) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 2-1/2", (Sub For Mg280259) Hex Head, Cap Screw; 3/8" X 2-1/2" (Upper), Cap Screw; 3/8" X 2-1/2", (Manual), Cap Screw; 3/8" X 2-1/2" (Use With Ar91662), Cap Screw; (A) 3/8" X 2-1/2", Cap Screw; 3/8" X 1-5/8", Cap Screw; 3/8" X 2-1/2" Sae 8 Low, Cap Screw; 3/8" X 2-1/2" 3/8" X 2 1/2", Cap Screw; (A) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 2-1/2", (Use With N260835), Cap Screw; 3/8" X 2-1/2" Lks., Cap Screw; 3/8" X 2-1/2", (Sae 8), Cap Screw; 3/8" X 2-1/2" Pe3029dkv55, Cap Screw; (A: Included In Ae48634) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Ar91662), Cap Screw; 3/8" X 2-1/2", (Code 6212), Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -6900)) 3/8" X 2-1/2", Cap Screw; (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8" X 2-1/2", Cap Screw; X 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With Re30685), Cap Screw; 3/8" X 2-1/2" Pe3029tkv50, Cap Screw; 3/8" X 2-1/2", (Use With Ar97707), Cap Screw; 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" (Sae 8), Front, Cap Screw; 3/8" X 2-1/2" (Sub For 19h268)Up, Cap Screw; 3/8"X2-1/2", For 3179dl016, Cap Screw; 9.525 X 63.500 mm (3/8" X 2-1/2") Hs, Sae 8, Cap Screw; (Use With Dd12120), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/8"X2-1/2" (For T54638, 14h1076) (Also Ord T15634), Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8) Low, Cap Screw; 3/8" X 2-1/2", (Hd-G), Cap Screw; 3/8" X 2-1/2" Use With Ar91662, Cap Screw; 3/8" X 2-1/2" 3/8" X 2-1/2", Cap Screw; 9.525 X 63.500 mm, Cap Screw; 3/8" X 2", (Sub For Mg280259) Hex Head, Grade 8, Cap Screw; 3/8" X 2-1/2", (Up), Cap Screw; 3/8"X1-5/8", Cap Screw; 3/8"X2-1/2", Cap Screw; 3/8" X 2-1/2" (For T54678, 14h1053) Ord 19h3631, T15634), Cap Screw; 3/8" X 2-1/2", (Use With Re31973 And R42729), Cap Screw; 3/8" X 2-1/2", (Upper), Cap Screw; 3/8" X 2-1/2", (Hs, Sae 8), Low, Cap Screw; 3/8" X 2-1/2", (Use With Re57603), Cap Screw; 3/8" X 2-1/2" Pe3029dkv54, Cap Screw; 3/8" X 2-1/2" Upper, Cap Screw; 9.525 X 63.500 mm (3/8" X 2-1/2"), Cap Screw; 3/8" X 2-1/2", Hs Sae 8, Cap Screw; (Use With R54986 And T20315), Cap Screw; 3/8" X 2-1/2" (Use With Re57603), Cap Screw; 3/8" X 2-1/2", Cap Screw; (B: Xxxxxx- 446(1168) 546(1129)) 3/8" X 2-1/2", Cap Screw; (A: 9550 ( -6900) 9550sh ( -69*00)) 3/8" X 2-1/2", Cap Screw; (B) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" Pe3029dkv50, Cap Screw; 3/8" X 2-1/2", (Also Order N10215), Cap Screw; 3/8" X 2-1/2" Sub For 19h268, Up, Cap Screw; 3/8" X 2-1/2", Hs, Sae 8, Cap Screw, Cap Screw; 3/8" X 2-1/2", (Upper), Cap Screw; 3/8" X 2-1/2" (Use With T20315)(Hs, Sae 8), Cap Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 2-1/2" Used W/L.H. Gauge Wheel, Cap Screw; 3/8" X 2-1/2" Pe3029tkv51, Cap Screw; 3/8" X 2-1/2" Use With Re30685	1
24***41	Washer; X X 17/32" X 15/16" X .060", Washer; 17/32" X 15/16" X 0.060", (154"), Washer; 17/32" X 15/16" X 0.060", (If Required For Lever Operation), Washer; 17/32" X 15/16" X 0,060", Washer; (C) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16", Washer; (B: For 9650 (70*01- ) & 9750 (7001- )) 17/32" X 15/16" X 0.060", Washer; 17/32"X15/16"X0.06", Washer; 17/32"X15/16", Washer; (A: Use With Conversion From Niehoff To Motorola Alternator For 8450 Prior To Serial No. 0086) 17/32" X 15/16" X 0.060", Washer; (A: ( -Xxxxxx) 4650-0101; 4850-0073) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", (443, 444, 643 Corn Heads), Washer; 17/32" X 1" X .060", Washer; (E) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0,06", Washer; (E), Washer; (B) (C) 17/32" X 15/16" X 0.060", Washer; (A: Power Shift Transmission) 17/32" X 15/16" X 0.060", Washer; (A: ( -Xxxxxx) 4050-0060; 4250-0095; 4450-0171) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", Middle, Washer; 17/32" X 15/16" X 0.060" (1243), Washer, Washer; 17/32" X 15/16" X 0.060" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925-8 Used; 930-10 Used; And 930 Flex Arg-1 Used), Washer; (B) (C) (D) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Washer; 13.487 X 23.825 X 1.524 mm, Washer; 17/32" X 15/16" X 0.060" 17/32" X 15/16" X .060", Washer; (D), Washer; 17/32"X15/16"X.060", Washer; (A: Used In 5415 And 5715 Orchard Tractors) 17/32" X 15/16" X 0.060", Washer; 17/32"X15/16"X0.060", Washer; 17/32" X 15/16" X 0.060" (154"), Washer; (A: For 9650 ( -7000) & 9750 ( -7000)) 17/32" X 15/16" X 0.060", Washer; (D: (Xxxxxx- ) 7600-0027; 7700-0005; 7800-0004) 17/32" X 15/16" X 0.060", Washer; 060 X 17/32 X 15/16 Zn, Washer; (A) .060" X 17/32" X 15/16", Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 17/32" X 15/16" X 0.060", Washer; 0.060"X17/32"X15/16", Washer; 17/32" X 15/16" X 0.060" (A), Washer; (B) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", (3 Nominal), Washer; (A) 17/32" X 15/16" X 0.060", Washer; (A: Note; 9550 (7001- ) 9550sh (70**01- )) 17/32" X 15/16" X 0.060", Washer; .060" X 17/32" X 15/16" (Sub For 24h1864), Washer; 0.06" X 17/32" X 15/16", Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 17/32" X 15/16" X 0.060", Washer; X 17/32" X 15/16" X .060", Washer; (A) (B) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0,060" (Sub For 24h1786, Ap, Washer; 17/32" X 15/16" X .060", Washer; (A: Used In High Clearance Tractors Too) 17/32" X 15/16" X 0.060", Washer; (D) 17/32" X 15/16" X 0.060", Washer; 15/16"X17/32"X.060", Washer; (C) (D) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060" (A) (B), Washer; (Sub For Mg771710), Washer; 17/32" X 13/16" X 0.060"	4
34***11	Spring Pin; 1/4"X 7/8" (Sub R66901, (2) R27507), Spring Pin; 6.350 X 22.225 mm (1/4" X 7/8"), Spring Pin; 1/4" X 7/8", Spring Pin, Spring Pin; 1/4" X 7/8",(L.H.), Spring Pin; 1/4" X 7/8" (Lh), Spring Pin; 1/4" X 7/8" 1/4" X 7/8", Spring Pin; 1/4" X 7/8", (Sub R66901 And (2) R27507), Spring Pin; 1/4"X7/8" (Sub R66901, (2) R27507), Spring Pin; 1/4" X 7/8" (Sub R66901, (2) R27507), Spring Pin; 1/4"X7/8", Spring Pin, Spring Pin; 1/4" X 7/8", (Sub R66901 And (2) R72654), Spring Pin; (Sub R66901, (2) R27507)	8
AE***84	Cross And Bearing As; (Includes Jd7842 And P49554), Cross And Bearing As; Incl Keys 14,17, Cross And Bearing As, Cross And Bearing As; (A), Cross And Bearing As; Assembly, Incl Key 2,3, Cross And Bearing As; (Sub Ae22753, This Application)	2

See all parts with full part numbers in Heavy Parts AI →

Need a specific 3955 - HARVESTER, ENSILAGE AND FORAGE part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.