John Deeredisk(no series)
John Deere 375 - DISK
Specifications · attachment guidance · OEM parts breakdown
Post a parts request and compare supplier quotes.
John Deere 375 - DISK specifications
Engine
| Type | 2-cylinder, air-cooled gasoline |
| Displacement | 781 cc (47.7 cu in) |
| Rated Speed | 3,000 RPM |
Weights
| Operating Weight | 1,633 kg (3,600 lbs) |
| Rated Operating Capacity | 454 kg (1,000 lbs) |
Dimensions
| Overall Width | 122 cm (48 in) |
| Ground Clearance | 19 cm (7.5 in) |
| Lift Height to Hinge Pin | 274 cm (108 in) |
Performance
| Max Travel Speed | 10.5 km/h (6.5 mph) |
| Tipping Load | 907 kg (2,000 lbs) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
375 - DISK attachments & work tools
Skid Steer Quick Hitch & General Attachments
Commonly used tools include buckets, grapple buckets, 4-in-1 buckets, trenchers, hydraulic augers, pallet forks, sweepers, brush cutters, stump grinders, and dozer blades.
All 375 - DISK assemblies by section
Every catalogued assembly group for the John Deere 375 - DISK. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Caster Wheel, Axle, And Support All Sizes [C03]
John Deere : 375 - Disk : Caster Wheel, Axle, And Support All Sizes [C03]
| 03***64 | Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040) | 4 |
| 08***36 | Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8" | 4 |
| 11***18 | Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel) | 1 |
Combination Scrapers ( -1980) 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [B06]
John Deere : 375 - Disk : Combination Scrapers ( -1980) 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [B06]
| 19***81 | Cap Screw; 1/2" X 2-1/2", Cap Screw; (B) (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (For T28025), Cap Screw; 1/2" X 3-1/2" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3-1/2", (If Machine Is Equipped With Auxiliary Hydraulic System), Cap Screw; (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Sub For 19h1945), Cap Screw; (B) (D) 1/2" X 3-1/2", Cap Screw; (C) (D) 1/2" X 3-1/2", Cap Screw; (A) 1/2" X 3-1/2", Cap Screw; 1/2"X3-1/2", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/2", Cap Screw; (E) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", Use With Key 3 Only, Cap Screw; 1/2" X 3-1/2" (A), Cap Screw; (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With A21163 Or A21164), Cap Screw; (A) (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Use With Light Bracket On Integral And Drawn Flexible Models), Cap Screw; 1/2" X 3-1/2", (4 Used On R.H. And L.H. Outside Of Machine), Cap Screw; 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheels), Cap Screw; (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheel), Cap Screw; (F) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (A) (B), Cap Screw; 1/2" X 3-1/2", Rear Hinge, Cap Screw; 1/2" X 3-1/2", Center Hinge, Cap Screw; 1/2" X 3-1/2" (Rh), Cap Screw; (B) (C) (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", R.H., Cap Screw; 1/2"X3-1/2" Unc, Cap Screw; 1/2" X 3-1/2", (Sub For Mg88273), Cap Screw; 1/2" X 3-1/2", (Front Hinge), Cap Screw; (B) 1/2" X 3-1/2", When Clips Are Used, Cap Screw; 1/2"X3-1/2" (For T28025) | 34 |
| 19***20 | Cap Screw; 1/2" X 3-1/4", (Sub For Gf25165), Cap Screw; (E) (F) 1/2" X 3-1/4", Cap Screw; (F) 1/2" X 3-1/4", Cap Screw; (A) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" Use With Sae 4 Flywheel Hsg, Cap Screw; (D) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; 1/2"X3-1/4" (For L29021), Cap Screw; (B) (C) 1/2" X 3-1/4", Cap Screw; (Amrked R77714), Cap Screw; 1/2" X 3-1/4", (Sub For 19h1945), Cap Screw; (A) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With Sae 4 Flywheel Housing), Cap Screw; (C) 1/2" X 3-1/4", Cap Screw; (Marked R77714), Cap Screw; 12.700 X 82.550 mm, Cap Screw; (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With H110290 Or H119210), Cap Screw; 1/2" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/4" (On Wing) (Hs, Sae 8), Cap Screw; 1/2" X 3-1/4" ((Hs, Sae 8), Cap Screw; 1/2"X3-1/4", Cap Screw; (B) 1/2" X 3-1/4", Cap Screw; (A) 1/2" X 3-1/4", Cap Screw; (E) 1/2" X 3-1/4", Cap Screw; (C) (D) 1/2" X 3-1/4", Cap Screw, Cap Screw; 1/2" X 3-1/4", (With Single Spacer), Cap Screw; 1/2"X3-1/4" |, Cap Screw; 1/2" X 3-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 3-1/4" Hs, Sae 8, Cap Screw; 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D) (B) 1/2" X 3-1/4", Cap Screw; (B) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (For Drawn Flexible Main Frame And Wing), Cap Screw; (N: 10 Foot Main Frame Model) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D), Cap Screw; 1/2" X 3-1/4", For 790, Cap Screw; (E) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (Use With H110290 Or H119210) | 104 |
| 24***25 | Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00***00-), 370 (00***00-) And 390 (00***00-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-00***82), 370 (-00***93) And 390 (-00***80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334) | 144 |
Combination Scrapers ( -1980) 280 Mm (11") Spacing 10.7 M (35'4") And 12.4 M (40'6") Sizes [B10]
John Deere : 375 - Disk : Combination Scrapers ( -1980) 280 Mm (11") Spacing 10.7 M (35'4") And 12.4 M (40'6") Sizes [B10]
| 19***81 | Cap Screw; 1/2" X 2-1/2", Cap Screw; (B) (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (For T28025), Cap Screw; 1/2" X 3-1/2" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3-1/2", (If Machine Is Equipped With Auxiliary Hydraulic System), Cap Screw; (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Sub For 19h1945), Cap Screw; (B) (D) 1/2" X 3-1/2", Cap Screw; (C) (D) 1/2" X 3-1/2", Cap Screw; (A) 1/2" X 3-1/2", Cap Screw; 1/2"X3-1/2", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/2", Cap Screw; (E) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", Use With Key 3 Only, Cap Screw; 1/2" X 3-1/2" (A), Cap Screw; (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With A21163 Or A21164), Cap Screw; (A) (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Use With Light Bracket On Integral And Drawn Flexible Models), Cap Screw; 1/2" X 3-1/2", (4 Used On R.H. And L.H. Outside Of Machine), Cap Screw; 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheels), Cap Screw; (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheel), Cap Screw; (F) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (A) (B), Cap Screw; 1/2" X 3-1/2", Rear Hinge, Cap Screw; 1/2" X 3-1/2", Center Hinge, Cap Screw; 1/2" X 3-1/2" (Rh), Cap Screw; (B) (C) (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", R.H., Cap Screw; 1/2"X3-1/2" Unc, Cap Screw; 1/2" X 3-1/2", (Sub For Mg88273), Cap Screw; 1/2" X 3-1/2", (Front Hinge), Cap Screw; (B) 1/2" X 3-1/2", When Clips Are Used, Cap Screw; 1/2"X3-1/2" (For T28025) | 34 |
| 19***20 | Cap Screw; 1/2" X 3-1/4", (Sub For Gf25165), Cap Screw; (E) (F) 1/2" X 3-1/4", Cap Screw; (F) 1/2" X 3-1/4", Cap Screw; (A) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" Use With Sae 4 Flywheel Hsg, Cap Screw; (D) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; 1/2"X3-1/4" (For L29021), Cap Screw; (B) (C) 1/2" X 3-1/4", Cap Screw; (Amrked R77714), Cap Screw; 1/2" X 3-1/4", (Sub For 19h1945), Cap Screw; (A) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With Sae 4 Flywheel Housing), Cap Screw; (C) 1/2" X 3-1/4", Cap Screw; (Marked R77714), Cap Screw; 12.700 X 82.550 mm, Cap Screw; (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With H110290 Or H119210), Cap Screw; 1/2" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/4" (On Wing) (Hs, Sae 8), Cap Screw; 1/2" X 3-1/4" ((Hs, Sae 8), Cap Screw; 1/2"X3-1/4", Cap Screw; (B) 1/2" X 3-1/4", Cap Screw; (A) 1/2" X 3-1/4", Cap Screw; (E) 1/2" X 3-1/4", Cap Screw; (C) (D) 1/2" X 3-1/4", Cap Screw, Cap Screw; 1/2" X 3-1/4", (With Single Spacer), Cap Screw; 1/2"X3-1/4" |, Cap Screw; 1/2" X 3-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 3-1/4" Hs, Sae 8, Cap Screw; 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D) (B) 1/2" X 3-1/4", Cap Screw; (B) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (For Drawn Flexible Main Frame And Wing), Cap Screw; (N: 10 Foot Main Frame Model) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D), Cap Screw; 1/2" X 3-1/4", For 790, Cap Screw; (E) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (Use With H110290 Or H119210) | 88 |
| 24***25 | Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00***00-), 370 (00***00-) And 390 (00***00-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-00***82), 370 (-00***93) And 390 (-00***80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334) | 124 |
Combination Scrapers (1980- ) 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [B08]
John Deere : 375 - Disk : Combination Scrapers (1980- ) 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [B08]
| 19***81 | Cap Screw; 1/2" X 2-1/2", Cap Screw; (B) (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (For T28025), Cap Screw; 1/2" X 3-1/2" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3-1/2", (If Machine Is Equipped With Auxiliary Hydraulic System), Cap Screw; (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Sub For 19h1945), Cap Screw; (B) (D) 1/2" X 3-1/2", Cap Screw; (C) (D) 1/2" X 3-1/2", Cap Screw; (A) 1/2" X 3-1/2", Cap Screw; 1/2"X3-1/2", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/2", Cap Screw; (E) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", Use With Key 3 Only, Cap Screw; 1/2" X 3-1/2" (A), Cap Screw; (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With A21163 Or A21164), Cap Screw; (A) (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Use With Light Bracket On Integral And Drawn Flexible Models), Cap Screw; 1/2" X 3-1/2", (4 Used On R.H. And L.H. Outside Of Machine), Cap Screw; 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheels), Cap Screw; (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheel), Cap Screw; (F) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (A) (B), Cap Screw; 1/2" X 3-1/2", Rear Hinge, Cap Screw; 1/2" X 3-1/2", Center Hinge, Cap Screw; 1/2" X 3-1/2" (Rh), Cap Screw; (B) (C) (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", R.H., Cap Screw; 1/2"X3-1/2" Unc, Cap Screw; 1/2" X 3-1/2", (Sub For Mg88273), Cap Screw; 1/2" X 3-1/2", (Front Hinge), Cap Screw; (B) 1/2" X 3-1/2", When Clips Are Used, Cap Screw; 1/2"X3-1/2" (For T28025) | 34 |
| 19***20 | Cap Screw; 1/2" X 3-1/4", (Sub For Gf25165), Cap Screw; (E) (F) 1/2" X 3-1/4", Cap Screw; (F) 1/2" X 3-1/4", Cap Screw; (A) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" Use With Sae 4 Flywheel Hsg, Cap Screw; (D) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; 1/2"X3-1/4" (For L29021), Cap Screw; (B) (C) 1/2" X 3-1/4", Cap Screw; (Amrked R77714), Cap Screw; 1/2" X 3-1/4", (Sub For 19h1945), Cap Screw; (A) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With Sae 4 Flywheel Housing), Cap Screw; (C) 1/2" X 3-1/4", Cap Screw; (Marked R77714), Cap Screw; 12.700 X 82.550 mm, Cap Screw; (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With H110290 Or H119210), Cap Screw; 1/2" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/4" (On Wing) (Hs, Sae 8), Cap Screw; 1/2" X 3-1/4" ((Hs, Sae 8), Cap Screw; 1/2"X3-1/4", Cap Screw; (B) 1/2" X 3-1/4", Cap Screw; (A) 1/2" X 3-1/4", Cap Screw; (E) 1/2" X 3-1/4", Cap Screw; (C) (D) 1/2" X 3-1/4", Cap Screw, Cap Screw; 1/2" X 3-1/4", (With Single Spacer), Cap Screw; 1/2"X3-1/4" |, Cap Screw; 1/2" X 3-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 3-1/4" Hs, Sae 8, Cap Screw; 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D) (B) 1/2" X 3-1/4", Cap Screw; (B) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (For Drawn Flexible Main Frame And Wing), Cap Screw; (N: 10 Foot Main Frame Model) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D), Cap Screw; 1/2" X 3-1/4", For 790, Cap Screw; (E) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (Use With H110290 Or H119210) | 104 |
| 24***25 | Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00***00-), 370 (00***00-) And 390 (00***00-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-00***82), 370 (-00***93) And 390 (-00***80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334) | 144 |
Combination Scrapers (1980- ) 280 Mm (11") Spacing 10.7 M (35'4") And 12.4 M (40'6") Sizes [B12]
John Deere : 375 - Disk : Combination Scrapers (1980- ) 280 Mm (11") Spacing 10.7 M (35'4") And 12.4 M (40'6") Sizes [B12]
| 19***81 | Cap Screw; 1/2" X 2-1/2", Cap Screw; (B) (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (For T28025), Cap Screw; 1/2" X 3-1/2" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3-1/2", (If Machine Is Equipped With Auxiliary Hydraulic System), Cap Screw; (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Sub For 19h1945), Cap Screw; (B) (D) 1/2" X 3-1/2", Cap Screw; (C) (D) 1/2" X 3-1/2", Cap Screw; (A) 1/2" X 3-1/2", Cap Screw; 1/2"X3-1/2", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/2", Cap Screw; (E) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", Use With Key 3 Only, Cap Screw; 1/2" X 3-1/2" (A), Cap Screw; (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With A21163 Or A21164), Cap Screw; (A) (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Use With Light Bracket On Integral And Drawn Flexible Models), Cap Screw; 1/2" X 3-1/2", (4 Used On R.H. And L.H. Outside Of Machine), Cap Screw; 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheels), Cap Screw; (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheel), Cap Screw; (F) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (A) (B), Cap Screw; 1/2" X 3-1/2", Rear Hinge, Cap Screw; 1/2" X 3-1/2", Center Hinge, Cap Screw; 1/2" X 3-1/2" (Rh), Cap Screw; (B) (C) (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", R.H., Cap Screw; 1/2"X3-1/2" Unc, Cap Screw; 1/2" X 3-1/2", (Sub For Mg88273), Cap Screw; 1/2" X 3-1/2", (Front Hinge), Cap Screw; (B) 1/2" X 3-1/2", When Clips Are Used, Cap Screw; 1/2"X3-1/2" (For T28025) | 34 |
| 19***20 | Cap Screw; 1/2" X 3-1/4", (Sub For Gf25165), Cap Screw; (E) (F) 1/2" X 3-1/4", Cap Screw; (F) 1/2" X 3-1/4", Cap Screw; (A) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" Use With Sae 4 Flywheel Hsg, Cap Screw; (D) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; 1/2"X3-1/4" (For L29021), Cap Screw; (B) (C) 1/2" X 3-1/4", Cap Screw; (Amrked R77714), Cap Screw; 1/2" X 3-1/4", (Sub For 19h1945), Cap Screw; (A) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With Sae 4 Flywheel Housing), Cap Screw; (C) 1/2" X 3-1/4", Cap Screw; (Marked R77714), Cap Screw; 12.700 X 82.550 mm, Cap Screw; (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With H110290 Or H119210), Cap Screw; 1/2" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/4" (On Wing) (Hs, Sae 8), Cap Screw; 1/2" X 3-1/4" ((Hs, Sae 8), Cap Screw; 1/2"X3-1/4", Cap Screw; (B) 1/2" X 3-1/4", Cap Screw; (A) 1/2" X 3-1/4", Cap Screw; (E) 1/2" X 3-1/4", Cap Screw; (C) (D) 1/2" X 3-1/4", Cap Screw, Cap Screw; 1/2" X 3-1/4", (With Single Spacer), Cap Screw; 1/2"X3-1/4" |, Cap Screw; 1/2" X 3-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 3-1/4" Hs, Sae 8, Cap Screw; 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D) (B) 1/2" X 3-1/4", Cap Screw; (B) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (For Drawn Flexible Main Frame And Wing), Cap Screw; (N: 10 Foot Main Frame Model) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D), Cap Screw; 1/2" X 3-1/4", For 790, Cap Screw; (E) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (Use With H110290 Or H119210) | 88 |
| 24***25 | Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00***00-), 370 (00***00-) And 390 (00***00-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-00***82), 370 (-00***93) And 390 (-00***80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334) | 124 |
Cross Link, Lower All Sizes [A17]
John Deere : 375 - Disk : Cross Link, Lower All Sizes [A17]
| 11***38 | Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm | 1 |
| 14***15 | Nut; 1-1/8" Slotted, Nut; 1-1/8", Slotted, Nut; 1-1/8", Nut; 1-1/8", Slot | 1 |
| 19***12 | Cap Screw; 3/8" X 3-1/2" 3/8" X 3-1/2", Cap Screw; 3/8"X3-1/2", For 3179dl016, Cap Screw; 3/8" X 3-1/2", (Use With R100676 And R100682) (Code (2331), Cap Screw; 3/8" X 3-1/2" (Pst), Cap Screw; 3/8" X 3-1/2", Code 6201, Cap Screw; 3/8" X 3-1/2", (Na-D), Cap Screw; 3/8" X 3-1/2", (Sub For Mg88959), Cap Screw; 3/8" X 3-1/2", (2515,9701), Cap Screw; (A: Fan Guard) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2" (Sae 8), Cap Screw; 3/8" X 3-1/2", Upper, Cap Screw; 3/8" X 3-1/2", (Use With R100682) Code 2311(Af, Af001), Cap Screw; 3/8"X3-1/2", For 3179dl001, Cap Screw; 3/8" X 3-1/2", (Use With R81911), Cap Screw; 3/8" X 3-1/2", (Use With R98586) Code 2311(Tf), Cap Screw; 3/8" X 3-1/2", (Use With R100676), Cap Screw; 3/8" X 3-1/2", (6219), Cap Screw; 3/8" X 3-1/2", (Code 3904), Cap Screw; 3/8" X 3-1/2", Or Ord 19m7811 (M10 X 90), Cap Screw; 3/8" X 3-1/2", (4250,4450,4650,4850), Cap Screw; 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Use With T11234), Cap Screw; 3/8"X3-1/2", Cap Screw; 9.525 X 88.900 mm (3/8" X 3-1/2"), Cap Screw; 3/8" X 3-1/2" (Fan Guard), Cap Screw; 3/8" X 3-1/2", (Single Selective Control), Cap Screw; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 3-1/2", Cap Screw; (B: Power Shift Transmission) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2" Upper, Cap Screw; 3/8" X 3-1/2" (Diesel), Cap Screw; (A) (B), Cap Screw; (E) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Fan Guard), Cap Screw; 3/8" X 3-1/2", (6207,6209), Cap Screw; (Or Ord 19m7811 (M10 X 90)), Cap Screw; 3/8" X 3-1/2" (Fan Guard) (4250, 4450, 4650, 4850), Cap Screw; 3/8" X 3-1/2", Code 2314 (Af Only) (Fan To R100676), Cap Screw; (D: (Xxxxxx- ) 8560-00***01; 8760-00***01) 3/8" X 3-1/2", Cap Screw; (A: Use With Ar87205) 3/8" X 3-1/2", Cap Screw; (B) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Sae 8), Cap Screw; (D) 3/8" X 3-1/2", Cap Screw; (A) 3/8"X3-1/2", Cap Screw; (A) (B) 3/8" X 3-1/2", Cap Screw, Cap Screw; 3/8" X 3-1/2", (9118), Cap Screw; 3/8" X 3-1/2", (Single), Cap Screw; 3/8" X 3-1/2", (Use With R100676 And R100682), Cap Screw; 9.525 X 88.900 mm, Cap Screw; 3/8"X1-7/8", Cap Screw; 3/8" X 3-1/2", (6207), Cap Screw; 3/8" X 3-1/2", (Use With R100676) Code 2501 And 2503, Cap Screw; (A) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Code 3901) | 1 |
Cross Link, Upper All Sizes [A16]
John Deere : 375 - Disk : Cross Link, Upper All Sizes [A16]
| 19***12 | Cap Screw; 3/8" X 3-1/2" 3/8" X 3-1/2", Cap Screw; 3/8"X3-1/2", For 3179dl016, Cap Screw; 3/8" X 3-1/2", (Use With R100676 And R100682) (Code (2331), Cap Screw; 3/8" X 3-1/2" (Pst), Cap Screw; 3/8" X 3-1/2", Code 6201, Cap Screw; 3/8" X 3-1/2", (Na-D), Cap Screw; 3/8" X 3-1/2", (Sub For Mg88959), Cap Screw; 3/8" X 3-1/2", (2515,9701), Cap Screw; (A: Fan Guard) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2" (Sae 8), Cap Screw; 3/8" X 3-1/2", Upper, Cap Screw; 3/8" X 3-1/2", (Use With R100682) Code 2311(Af, Af001), Cap Screw; 3/8"X3-1/2", For 3179dl001, Cap Screw; 3/8" X 3-1/2", (Use With R81911), Cap Screw; 3/8" X 3-1/2", (Use With R98586) Code 2311(Tf), Cap Screw; 3/8" X 3-1/2", (Use With R100676), Cap Screw; 3/8" X 3-1/2", (6219), Cap Screw; 3/8" X 3-1/2", (Code 3904), Cap Screw; 3/8" X 3-1/2", Or Ord 19m7811 (M10 X 90), Cap Screw; 3/8" X 3-1/2", (4250,4450,4650,4850), Cap Screw; 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Use With T11234), Cap Screw; 3/8"X3-1/2", Cap Screw; 9.525 X 88.900 mm (3/8" X 3-1/2"), Cap Screw; 3/8" X 3-1/2" (Fan Guard), Cap Screw; 3/8" X 3-1/2", (Single Selective Control), Cap Screw; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 3-1/2", Cap Screw; (B: Power Shift Transmission) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2" Upper, Cap Screw; 3/8" X 3-1/2" (Diesel), Cap Screw; (A) (B), Cap Screw; (E) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Fan Guard), Cap Screw; 3/8" X 3-1/2", (6207,6209), Cap Screw; (Or Ord 19m7811 (M10 X 90)), Cap Screw; 3/8" X 3-1/2" (Fan Guard) (4250, 4450, 4650, 4850), Cap Screw; 3/8" X 3-1/2", Code 2314 (Af Only) (Fan To R100676), Cap Screw; (D: (Xxxxxx- ) 8560-00***01; 8760-00***01) 3/8" X 3-1/2", Cap Screw; (A: Use With Ar87205) 3/8" X 3-1/2", Cap Screw; (B) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Sae 8), Cap Screw; (D) 3/8" X 3-1/2", Cap Screw; (A) 3/8"X3-1/2", Cap Screw; (A) (B) 3/8" X 3-1/2", Cap Screw, Cap Screw; 3/8" X 3-1/2", (9118), Cap Screw; 3/8" X 3-1/2", (Single), Cap Screw; 3/8" X 3-1/2", (Use With R100676 And R100682), Cap Screw; 9.525 X 88.900 mm, Cap Screw; 3/8"X1-7/8", Cap Screw; 3/8" X 3-1/2", (6207), Cap Screw; 3/8" X 3-1/2", (Use With R100676) Code 2501 And 2503, Cap Screw; (A) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Code 3901) | 1 |
| 34***34 | Spring Pin; 5/16" X 2" 36 Ft And 42 Ft, Spring Pin; (A: 40 X 112, 34', 41' 10" And 41' 12.5") 5/16" X 2", Spring Pin; 5/16" X 2", (Use With N231208), Spring Pin; 5/16" X 2", Spring, Spring Pin; (A: 40 X 112, 34 And 41 Ft) 5/16" X 2", Spring Pin; 5/16" X 2" 30 Ft, Spring Pin; 5/16" X 2" (A), Spring Pin, Spring Pin; 5/16" X 2", 30', (Use With N231208), Spring Pin; 5/16" X 2", (1000 Rpm), Spring Pin; 5/16" X 2" 30 Ft; 5/16" X 2", Spring Pin; 5/16" X 2" 36 Ft And 42 Ft; 5/16" X 2", Spring Pin; 5/16" X 2" 5/16 X 2, Spring Pin; (A: 40 Ft Drill) (B: 42 Ft Drill) 5/16" X 2", Spring Pin; 5/16" X 2", Spring Pin; 5/16" X 2", Type C (Semi-Integral), Spring Pin; 3/16" X 2", Spring Pin; 5/16" X 2", 36' And 42', (Use With N231208) | 1 |
| 34***59 | Spring Pin; 3/8" X 3" | 1 |
Furrow Filler Disk ( -1980) All Sizes [B16]
John Deere : 375 - Disk : Furrow Filler Disk ( -1980) All Sizes [B16]
| 03***99 | Bolt; 5/8" X 1-3/4", 4010 And 4020 Tractor, Bolt, Bolt; 5/8" X 1-3/4", Bolt; (A) 5/8" X 1-3/4", Bolt; (B) 5/8" X 1-3/4", Bolt; (C) 5/8" X 1-3/4" | 3 |
| 03***85 | Bolt; 1" X 3-1/2" | 1 |
| 14***48 | Bolt, Nut, Nut; 25.400 mm, Bolt; 1", Nut; 25.400 mm (1"), Nut; 1", Bolt; 1", Category 3n, Nut; 1", (Sub For K40018), Bolt; 1", (Power Rear Wheel Drive), Bolt; 1", (Rg6) | 1 |
Furrow Filler Disk (1980- ) All Sizes [B17]
John Deere : 375 - Disk : Furrow Filler Disk (1980- ) All Sizes [B17]
| 03***99 | Bolt; 5/8" X 1-3/4", 4010 And 4020 Tractor, Bolt, Bolt; 5/8" X 1-3/4", Bolt; (A) 5/8" X 1-3/4", Bolt; (B) 5/8" X 1-3/4", Bolt; (C) 5/8" X 1-3/4" | 3 |
| A1***83 | Washer, Washer; 1.060" X 2" X 1/4", Washer; (Sub For Na1795 And Na3851), Washer; (Sub For H82588) | 1 |
| A3***56 | Disk; 450 X 4.0 mm (18" X .157") 10p Edge, (Solid Spherical Disk), Disk; (A) 457 X 3.7 mm (18" X .148") 1p Edge, Disk; 457.200 X 3.500 mm (18" X 0.138"), No. 1p Edge, Disk; (Solid Cone), Disk; 449 X 4.0 mm (18" X .157") 10p Edge, (Solid Spherical Disk), Disk; (A) 457.200 X 3.500 mm (18" X 0.138"), No. 1p Edge, Disk; 450 mm X 4 mm (18.00" X .157") No. 1 Edge, Disk; (A: Solid Cone) 457 X 3.7 mm (18" X .148") 1p Edge, Disk; 449.580 X 3.500 mm (17.700" X 0.138"), No. 1p Edge | 1 |
Furrow Filler Scraper, Combination Scraper ( -1981) All Sizes [B14]
John Deere : 375 - Disk : Furrow Filler Scraper, Combination Scraper ( -1981) All Sizes [B14]
| 19***81 | Cap Screw; 1/2" X 2-1/2", Cap Screw; (B) (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (For T28025), Cap Screw; 1/2" X 3-1/2" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3-1/2", (If Machine Is Equipped With Auxiliary Hydraulic System), Cap Screw; (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Sub For 19h1945), Cap Screw; (B) (D) 1/2" X 3-1/2", Cap Screw; (C) (D) 1/2" X 3-1/2", Cap Screw; (A) 1/2" X 3-1/2", Cap Screw; 1/2"X3-1/2", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/2", Cap Screw; (E) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", Use With Key 3 Only, Cap Screw; 1/2" X 3-1/2" (A), Cap Screw; (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With A21163 Or A21164), Cap Screw; (A) (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Use With Light Bracket On Integral And Drawn Flexible Models), Cap Screw; 1/2" X 3-1/2", (4 Used On R.H. And L.H. Outside Of Machine), Cap Screw; 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheels), Cap Screw; (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheel), Cap Screw; (F) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (A) (B), Cap Screw; 1/2" X 3-1/2", Rear Hinge, Cap Screw; 1/2" X 3-1/2", Center Hinge, Cap Screw; 1/2" X 3-1/2" (Rh), Cap Screw; (B) (C) (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", R.H., Cap Screw; 1/2"X3-1/2" Unc, Cap Screw; 1/2" X 3-1/2", (Sub For Mg88273), Cap Screw; 1/2" X 3-1/2", (Front Hinge), Cap Screw; (B) 1/2" X 3-1/2", When Clips Are Used, Cap Screw; 1/2"X3-1/2" (For T28025) | 1 |
| 19***15 | Cap Screw; 1/2" X 1-1/4", North America, Cap Screw; 1/2" X 1-1/4" (Use With Ty15819, Ty16043, Ty15270 Or Ty16044), Cap Screw; 12.700 X 31.750 mm (1/2" X 1-1/4"), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (For Ty15270, Ty15819, Ty16043 And Ty16044), Cap Screw; 1/2" X 1-1/4" (Use With Re63295), Cap Screw; 1/2" X 1-1/4" (Use With 12h301), Cap Screw; 1/2" X 1-1/4" Nlr, Cap Screw; 1/2" X 1-1/4", (50 Per Package) (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4", (24 Used For 714, 714a; 28 Used For 716, 716a), Cap Screw; 1/2" X 1-1/4" Fenders, Cap Screw; 1/2" X 1-1/4", (Use With M46075), Cap Screw; 1/2 X 1-1/4", Cap Screw; (B) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (17 Used For Front Chain Shields, 26 Used For Rubber Shields, 10 Used For Steel Or Rear Chain Shields), Cap Screw; 5/8" X 2-1/2", Cap Screw; 1/2" X 1-1/4" (For Channel Tongue), Cap Screw; 1/2" X 1-1/4", (18 Used On Front Chain Shields, 26 Used On Rubber Shields, 10 Used On Rear Steel Or Chain Shields), Cap Screw; (A) (B) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Code 2306 And 2307, Cap Screw; 1/2" X 1-1/4" (Rh Side), Cap Screw; (A: Oversize Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", For 760 And 790, Cap Screw; 1/2x1-1/4", Cap Screw; 1/2" X 1-1/4" (Flexible), Cap Screw; 1/2" X 1-1/4" (Rh), Cap Screw; 1/2" X 1-1/4", (Sub For 19h1792), Cap Screw; (E) 1/2" X 1-1/4", Cap Screw; (B: Manual Hitch) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (50 Per Package) (Not Included With Piston Pump) (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4", (Sub For Ffsb109249), Cap Screw; (A) 1/2"X1-1/4", Cap Screw; (C) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" Lh, Cap Screw; 1/2" X 1-1/4", (Use With N202131), Cap Screw; 12.700 X 31.750 mm, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/4", (See Front Idler Support Plates), Cap Screw; (A: Os Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Lh, Cap Screw; 1/2" X 1-1/4" (Use With E54809), Cap Screw; 1/2" X 1-1/4", (For Channel Tongue), Cap Screw; (F) 1/2" X 1-1/4", Cap Screw; (A: (-Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (W/ Ae33160), Cap Screw; 1/2" X 1-1/4" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/4", (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (540rpm), Cap Screw; 1/2" X 1-1/4", 50 Per Package, (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4" (Flex), Cap Screw, Cap Screw; 1/2" X 1-1/4" 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 1/4", Cap Screw; (D) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 1-1/4", (6" Spacing), Cap Screw; (A) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Use With R110440), Cap Screw; 1/2" X 1-1/4", (For 14 Rotary Hoe), Cap Screw; 1/2" X 1-1/4", Fold Top, Cap Screw; 1/2" X 1-1/4", (Use With An210950), Cap Screw; 1/2"X2", Cap Screw; 1/2" X 1-1/4", (Use With Gd1072), Cap Screw; (E) 1/2" X 1-1/4", Front Gang, Cap Screw; (B: To Be Used With Oversize Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Code 2309 And 2310, Cap Screw; 1/2" X 1-1/4", (Use With Re63295), Cap Screw; 1/2" X 1-1/4", L.H., Cap Screw; (W) (F) 1/2" X 1-1/4", Cap Screw; 12.700 X 31.750 mm (1/2" X 1-1/4"), Cap Screw; 1/2" X 1-1/4", (Ru And Or), Cap Screw; 1/2" X 1-1/4", Rear Gang, Cap Screw; 1/2" X 1-1/4", (L.H. Only), Cap Screw; R.H., Cap Screw; 1/2" X 1-1/4" (Use With 14h1040 And 12h301), Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2"X1-1/4", Cap Screw; X 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Plateless Planting Unit, Cap Screw; 1/2" X 1-1/4", (Use With R110440), Cap Screw; X 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (Use With 12h304 And 14h1040), Cap Screw; 1/2" X 1-1/4" Hs, Sae 8 | 1 |
| 19***20 | Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer) | 1 |
Furrow Filler Scraper, Combination Scraper (1981- ) All Sizes [B15]
John Deere : 375 - Disk : Furrow Filler Scraper, Combination Scraper (1981- ) All Sizes [B15]
| 19***68 | Cap Screw; 5/8" X 5" | 1 |
| 19***20 | Cap Screw; 1/2" X 3-1/4", (Sub For Gf25165), Cap Screw; (E) (F) 1/2" X 3-1/4", Cap Screw; (F) 1/2" X 3-1/4", Cap Screw; (A) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" Use With Sae 4 Flywheel Hsg, Cap Screw; (D) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; 1/2"X3-1/4" (For L29021), Cap Screw; (B) (C) 1/2" X 3-1/4", Cap Screw; (Amrked R77714), Cap Screw; 1/2" X 3-1/4", (Sub For 19h1945), Cap Screw; (A) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With Sae 4 Flywheel Housing), Cap Screw; (C) 1/2" X 3-1/4", Cap Screw; (Marked R77714), Cap Screw; 12.700 X 82.550 mm, Cap Screw; (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With H110290 Or H119210), Cap Screw; 1/2" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/4" (On Wing) (Hs, Sae 8), Cap Screw; 1/2" X 3-1/4" ((Hs, Sae 8), Cap Screw; 1/2"X3-1/4", Cap Screw; (B) 1/2" X 3-1/4", Cap Screw; (A) 1/2" X 3-1/4", Cap Screw; (E) 1/2" X 3-1/4", Cap Screw; (C) (D) 1/2" X 3-1/4", Cap Screw, Cap Screw; 1/2" X 3-1/4", (With Single Spacer), Cap Screw; 1/2"X3-1/4" |, Cap Screw; 1/2" X 3-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 3-1/4" Hs, Sae 8, Cap Screw; 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D) (B) 1/2" X 3-1/4", Cap Screw; (B) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (For Drawn Flexible Main Frame And Wing), Cap Screw; (N: 10 Foot Main Frame Model) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D), Cap Screw; 1/2" X 3-1/4", For 790, Cap Screw; (E) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (Use With H110290 Or H119210) | 1 |
| 24***25 | Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00***00-), 370 (00***00-) And 390 (00***00-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-00***82), 370 (-00***93) And 390 (-00***80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334) | 1 |
Gang Bolts And Disks 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [B02]
John Deere : 375 - Disk : Gang Bolts And Disks 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [B02]
| 03***96 | Bolt; 1/2" X 3", Bolt; 1/2" X 3", Used With Cast Housing, Bolt; (B) (C) 1/2" X 3", Bolt; (A) 1/2" X 3", Bolt; (C) 1/2" X 3", Bolt; 1/2" X 3" (A), Bolt; (B) 1/2" X 3", Bolt; 1/2" X 3" (Use With Starter Weight), Bolt; 1/2" X 3" (A) (Use With Starter Weight) | 102 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 102 |
| 14***76 | Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-01***34; 4850-00***87) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-32***15; 4850-32***46) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-00***51; 4255-00***13; 4455-00***27) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-00***19; 8650-00***98) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-01***03;4955-01***24) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-00***87; 4255-00***81; 4455-01***58) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-00***31; 4250-00***42; 4450-02***66) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -32***23 (5310) -33***88) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -32***21 (5310) -33***91) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 32***24- (5310) 33***89-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8 | 34 |
Gang Bolts And Disks 280 Mm (11") Spacing 10.7 M (35'4") And 12.4 M (40'6") Sizes [B04]
John Deere : 375 - Disk : Gang Bolts And Disks 280 Mm (11") Spacing 10.7 M (35'4") And 12.4 M (40'6") Sizes [B04]
| 03***96 | Bolt; 1/2" X 3", Bolt; 1/2" X 3", Used With Cast Housing, Bolt; (B) (C) 1/2" X 3", Bolt; (A) 1/2" X 3", Bolt; (C) 1/2" X 3", Bolt; 1/2" X 3" (A), Bolt; (B) 1/2" X 3", Bolt; 1/2" X 3" (Use With Starter Weight), Bolt; 1/2" X 3" (A) (Use With Starter Weight) | 102 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 102 |
| 14***76 | Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-01***34; 4850-00***87) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-32***15; 4850-32***46) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-00***51; 4255-00***13; 4455-00***27) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-00***19; 8650-00***98) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-01***03;4955-01***24) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-00***87; 4255-00***81; 4455-01***58) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-00***31; 4250-00***42; 4450-02***66) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -32***23 (5310) -33***88) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -32***21 (5310) -33***91) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 32***24- (5310) 33***89-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8 | 34 |
Gang Frame And Standard ( -1980) 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [A23]
John Deere : 375 - Disk : Gang Frame And Standard ( -1980) 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [A23]
| 03***56 | Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors) | 34 |
| 08***47 | Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2" | 65 |
| 08***53 | Cap Screw; 3/4" X 6-3/4", Center Rig (For 127 X 178 mm (5" X 7") Frame), Cap Screw; (C) (D) 3/4" X 6-3/4", Cap Screw; (A) (B) 3/4" X 6-3/4", Cap Screw; 3/4" X 6-3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Cap Screw; 3/4" X 6-3/4" | 3 |
Gang Frame And Standard ( -1980) 280 Mm (11") Spacing 10.7 M (35'4") And 12.3 M (40'6") Sizes [A25]
John Deere : 375 - Disk : Gang Frame And Standard ( -1980) 280 Mm (11") Spacing 10.7 M (35'4") And 12.3 M (40'6") Sizes [A25]
| 03***56 | Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors) | 34 |
| 08***47 | Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2" | 65 |
| 08***53 | Cap Screw; 3/4" X 6-3/4", Center Rig (For 127 X 178 mm (5" X 7") Frame), Cap Screw; (C) (D) 3/4" X 6-3/4", Cap Screw; (A) (B) 3/4" X 6-3/4", Cap Screw; 3/4" X 6-3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Cap Screw; 3/4" X 6-3/4" | 3 |
Gang Frame And Standard (1980- ) 230 Mm (9") Spacing 10.9 M (36"0") And 12.3 M (40'4") Sizes [A24]
John Deere : 375 - Disk : Gang Frame And Standard (1980- ) 230 Mm (9") Spacing 10.9 M (36"0") And 12.3 M (40'4") Sizes [A24]
| 08***47 | Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2" | 65 |
| 08***53 | Cap Screw; 3/4" X 6-3/4", Center Rig (For 127 X 178 mm (5" X 7") Frame), Cap Screw; (C) (D) 3/4" X 6-3/4", Cap Screw; (A) (B) 3/4" X 6-3/4", Cap Screw; 3/4" X 6-3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Cap Screw; 3/4" X 6-3/4" | 3 |
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 65 |
Gang Frame And Standard (1980- ) 280 Mm (11") Spacing 10.7 M (35'4") And 12.3 M (40'6") Sizes [B01]
John Deere : 375 - Disk : Gang Frame And Standard (1980- ) 280 Mm (11") Spacing 10.7 M (35'4") And 12.3 M (40'6") Sizes [B01]
| 08***47 | Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2" | 65 |
| 08***53 | Cap Screw; 3/4" X 6-3/4", Center Rig (For 127 X 178 mm (5" X 7") Frame), Cap Screw; (C) (D) 3/4" X 6-3/4", Cap Screw; (A) (B) 3/4" X 6-3/4", Cap Screw; 3/4" X 6-3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Cap Screw; 3/4" X 6-3/4" | 3 |
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 65 |
Gang Nut Wrenches All Sizes [B25]
John Deere : 375 - Disk : Gang Nut Wrenches All Sizes [B25]
| A2***19 | Wrench; (Sq.), Wrench, Wrench; 61.9 mm (2-7/16"), Wrench; Sq., Wrench; Sq. Gang Nut, Wrench; Sq., For Gang Bolt, Wrench; Gang Nut, Sq., Wrench; Square Gang Nut, Wrench; Gang Nut, Square, Wrench; Square | 1 |
| A2***20 | Wrench; 1-1/4" Hex, Wrench; Hex. 32 mm (1-1/4"), Wrench; Hex. For 30 mm (1-1/4") Bolts, Gang Frame To Main Frame, Wrench; 32 mm (1-1/4") Hex., Wrench; 32mm (1-1/4"), Wrench; 30 mm (1-1/4"), Wrench; 30 mm (1-1/4") Gang Bolt, Wrench; Hex. 30 mm (1-1/4"), Wrench; 30 mm (1-1/4") Hex., Wrench; Hex., 30 mm (1-1/4"), Wrench; Hex., Wrench; Hex., For 30 mm (1-1/4") Gang Bolt, Wrench; Gang Nut, Hex. 32 mm (1-1/4"), Wrench, Wrench; Gang Nut, Hex, Wrench; 1-1/4" | 1 |
Hitch, Left Side All Sizes [A07]
John Deere : 375 - Disk : Hitch, Left Side All Sizes [A07]
| 08***54 | Bolt; 1" X 6-1/2", Bolt; (A) 1" X 6-1/2" | 1 |
| 11***40 | Cotter Pin; (B: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm (Hs=10.9), Cotter Pin; (A: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6,3 X 50mm, Cotter Pin; 6.300 X 50 mm, Category Ii, Cotter Pin; (D) 0.248" X 1.969", Cotter Pin; 6.300 X 50 mm, (Use With N186178), Cotter Pin; 6.300 X 50 mm (For P74011), Cotter Pin; 6.300 X 50 mm (Use With N186178), Cotter Pin; 6.300 X 50 mm (For A89333 And A89334), Cotter Pin; 6.300 X 50 mm, (4 Used With 3-Point Hitch, 8 Used With Loader), Cotter Pin; (B: Pull-Type Rotary Cutter Only) 6.300 X 50 mm, Cotter Pin; (B) 0.248" X 1.969", Cotter Pin; 6 X 50 mm (Sub For 11m1416), Cotter Pin; (A: 12'-6" To 27'-6") 6.300 X 50 mm, Cotter Pin, Cotter Pin; 6.300 X 50 mm, Cotter Pin; (A: Baler With Precutter) 6.300 X 50 mm, Cotter Pin; (B: For Baletrak) 6.300 X 50 mm, Cotter Pin; 6,3x50mm, Cotter Pin; (A: Hitch) 6.300 X 50 mm (Cat-Ii), Cotter Pin; 6,3 X 50 mm, Cotter Pin; 6.300 X 50 mm (0.248" X 1.969"), Cotter Pin; 6.300 X 50 mm, (Use Without Mechanical Front Wheel Drive), Cotter Pin; (D: Not For Elc Plus Monitor) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm, (Sub For 11h249), Cotter Pin; 0.248" X 1.969" | 1 |
| 1***2 | Spring | 2 |
Hitch, Right Side All Sizes [A09]
John Deere : 375 - Disk : Hitch, Right Side All Sizes [A09]
| 03***75 | Bolt; 3/8" X 2" | 2 |
| 08***54 | Bolt; 1" X 6-1/2", Bolt; (A) 1" X 6-1/2" | 1 |
| 11***38 | Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm | 1 |
Hydraulic Tube Clamp, Left Side Frame All Sizes [C01]
John Deere : 375 - Disk : Hydraulic Tube Clamp, Left Side Frame All Sizes [C01]
| 19***00 | Screw; 5/16" X 3/4" (B), Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785), Screw; 5/16" X 3/4", (2 Used, 347; 4 Used, 467), Screw; 5/16" X 3/4" (With Grain Tank Extensions), Screw; 5/16" X 3/4", (Hb-225), Screw; (B) 5/16"X3/4", Screw; 5/16" X 3/4" Sgb, Screw; 5/16" X 3/4", (Use Without Spacers), Screw; X 5/16" X 3/4" (Sub For 19h1813), Screw; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16" X 3/4", Screw; (A) (B) 5/16" X 3/4", Screw; 5/16" X 3/4" (Use With Adjustable Sieve), Screw; 5/16" X 3/4", (With Grain Tank Extensions), Screw; (B) 5/16" X 3/4", (Ut), Screw; 5/16" X 3/4" Use One Per H134773, Screw; X 5/16" X 3/4", Screw; (B: (Xxxxxx- ) 4050-00***46; 4250-01***93; 4450-02***59) 5/16" X 3/4", Screw; 5/16" X 3/4", (Back), Screw; 5/16" X 3/4", Use With Rotary Air Screen Only, Screw; 5/16" X 3/4" (Use Without Spacers), Screw; 5/16" X 3/4" (Use With H136957), Screw; (C: 55 Series Replacement Sgb) 5/16" X 3/4", Screw, Screw; 5/16" X 3/4", (Use With 12h303 And 14h785), Screw; (A) 5/16"X3/4", Screw; 5/16" X 3/4", (Use With R122725), Screw; 5/16" X 3/4", Insecticide Only, Screw; 5/16" X 3/4" (Use With 14h785), Screw; 5/16" X 3/4" (A) (Use With 14h785), Screw; 5/16" X 3/4" (218, 220, 222, 224, And 230), Screw; (Outlet), Screw; 5/16" X 3/4" (Sgb), Screw; (A) (C) (D) 5/16" X 3/4", Screw; (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (B) (Use With 14h785), Screw; 5/16" X 3/4", (Use With Rd. Hole Sieve), Screw; 5/16"-18 Unc X1/2", Screw; 5/16" X 3/4", (Use With Adjustable Sieve), Screw; 5/16" X 3/4", Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Long), Screw; 5/16" X 3/4" (213, 215, And 216), Screw; 5/16" X 3/4" (Rh), Screw; 5/16" X 3/4" Lh, Screw; 5/16" X 3/4" (2 Used, With Grain Tank Extension; 3 Used, Without Grain Tank Extension), Screw; 5/16" X 3/4" (Sub For 19h1936), Screw; 5/16" X 3/4", (Use With Round Hole Sieve), Screw; 5/16" X 3/4" (Used With Straw Chopper), Screw; 5/16" X 3/4" (Sub For 19h2021), Screw; 5/16" X 3/4" (Use With Rd. Hole Sieve), Screw; 5/16" X 3/4" (Use With N10213), Screw; 5/16" X 3/4" (Use With Round Hole Sieve), Screw; 7.925 X 19.050 mm, Screw; 5/16" X 3/4" (Use With 12h303 And 28h1511), Screw; 5/16" X 3/4", (Sub For Mg87872), Screw; 5/16" X 3/4", (Sub N10212, This Application), Screw; 5/16" X 3/4", Germany, Screw; 5/16" X 3/4" (Heat Shield To Vent Base), Screw; (A: ( -Xxxxxx) 4650-01***35) 5/16" X 3/4", Screw; 5/16"-18 Unc X3/4", Screw; 5/16" X 3/4", (Hinson Cab), Screw; 5/16" X 3/4" (Fixed Hole Sieve), Screw; 5/16" X 3/4", (Used With Round Hole Sieve), Screw; 5/16" X 3/4", (Corn Head), Screw; 5/16" X 3/4" (Use With Straw Chopper), Screw; (A: ( -Xxxxxx) 4050-00***45; 4250-01***92; 4450-02***58) 5/16" X 3/4", Screw; 5/16"X3/4", Screw; 5/16" X 3/4", Fastener (High-Drum), Cap Screw; 5/16" X 3/4", Screw; (Code 6204), Screw; (Use With R112197), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785) (Use With Round Hole Sieve), Screw; W/ Multi-Crop, Screw; (B: (Xxxxxx- ) 4650-01***36) 5/16" X 3/4", Screw; 5/16" X 3/4", (Code 6204), Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Regular And Long Fixed Drive), Screw; 5/16" X 3/4", (R.H. Side), Screw; (A) 5/16" X 3/4", Screw; X 5/16" X 3/4", Screw; (A: Sound-Gard Body) 5/16" X 3/4", Screw; 5/16" X 3/4", Use With Endwise Transport, Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4", (10 Used, Regular; 14 Used, Long), Screw; (B) 5/16" X 3/4", Screw; 5/16" X 3/4", (Sub For H1085r), Screw; 5/16" X 3/4", (Corn Head And Three-Row Narrow Row-Crop Units), Screw; 5/16" X 3/4" (Use With 12h303), Screw; (Sub For F1002012), Screw; 5/16"X3/4, Screw; 5/16" X 3/4", Use With Amt, Screw; 5/16" X 3/4" (Use With R122725), Screw; 5/16"X1", Screw; 5/16" X 3/4" L.H., Screw; 5/16" X 3/4" (Straw Chopper), Screw; 5/16" X 3/4" (Sub For Am121752), Screw; 5/16" X 3/4", (10 Used, Regular; 12 Used, Long), Screw; 5/16" X 3/4", (3 Used, 347; 4 Used, 467), Screw; (A) (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (C), Screw; 5/16" X 3/4" (Serviced In Ah93991), Screw; 5/16" X 3/4" (A), Screw; 5/16"-18 Nc X 3/4", Screw; 5/16" X 3/4", Less Spout-Trak, Screw; 5/16", Screw; 5/16" X 3/4" (To Transmission Input Housing), Screw; X X X 5/16" X 3/4", Screw; 5/16" X 3/4", For Endwise Transport, Screw; 5/16" X 3/4", (Cornhead Attachment), Screw; 5/16" X 3/4" Rh, Screw; 5/16" X 3/4" (Rh Side), Screw; 5/16" X 3/4", (Hinson), Screw; 5/16" X 3/4", (Used With Rd. Hole Sieve), Screw; 5/16" X 3/4", (Regular), Screw; 5/16" X 3/4" (Outlet), Screw; 5/16" X 3/4", (Insecticide Only), Screw; (B) 5/16" X 3/4", Control Support Side, Screw; 5/16" X 3/4", (Less Air Conditioner), Screw; (A: W/Cab) 5/16" X 3/4", Screw; 5/16" X 3/4", (12 Used, Regular; 16 Used, Long) | 2 |
| A3***02 | Stud | 2 |
| A3***03 | Socket, Gasket; - Outlet, Serial Range: Elbow-Head, Gasket; - Elbow, Gasket; Water Outlet Elbow, Gasket; - Water Outlet Elbow, Gasket; Water, Outlet, Elbow, Gasket; Elbow, Gasket; Gasket -, Serial Range: Elbow-Head, Gasket; Elbow To Cylinder Head | 2 |
Hydraulic Tube Clamps, Upper Cross Link ( -1986) All Sizes [C02]
John Deere : 375 - Disk : Hydraulic Tube Clamps, Upper Cross Link ( -1986) All Sizes [C02]
| 19***00 | Screw; 5/16" X 3/4" (B), Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785), Screw; 5/16" X 3/4", (2 Used, 347; 4 Used, 467), Screw; 5/16" X 3/4" (With Grain Tank Extensions), Screw; 5/16" X 3/4", (Hb-225), Screw; (B) 5/16"X3/4", Screw; 5/16" X 3/4" Sgb, Screw; 5/16" X 3/4", (Use Without Spacers), Screw; X 5/16" X 3/4" (Sub For 19h1813), Screw; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16" X 3/4", Screw; (A) (B) 5/16" X 3/4", Screw; 5/16" X 3/4" (Use With Adjustable Sieve), Screw; 5/16" X 3/4", (With Grain Tank Extensions), Screw; (B) 5/16" X 3/4", (Ut), Screw; 5/16" X 3/4" Use One Per H134773, Screw; X 5/16" X 3/4", Screw; (B: (Xxxxxx- ) 4050-00***46; 4250-01***93; 4450-02***59) 5/16" X 3/4", Screw; 5/16" X 3/4", (Back), Screw; 5/16" X 3/4", Use With Rotary Air Screen Only, Screw; 5/16" X 3/4" (Use Without Spacers), Screw; 5/16" X 3/4" (Use With H136957), Screw; (C: 55 Series Replacement Sgb) 5/16" X 3/4", Screw, Screw; 5/16" X 3/4", (Use With 12h303 And 14h785), Screw; (A) 5/16"X3/4", Screw; 5/16" X 3/4", (Use With R122725), Screw; 5/16" X 3/4", Insecticide Only, Screw; 5/16" X 3/4" (Use With 14h785), Screw; 5/16" X 3/4" (A) (Use With 14h785), Screw; 5/16" X 3/4" (218, 220, 222, 224, And 230), Screw; (Outlet), Screw; 5/16" X 3/4" (Sgb), Screw; (A) (C) (D) 5/16" X 3/4", Screw; (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (B) (Use With 14h785), Screw; 5/16" X 3/4", (Use With Rd. Hole Sieve), Screw; 5/16"-18 Unc X1/2", Screw; 5/16" X 3/4", (Use With Adjustable Sieve), Screw; 5/16" X 3/4", Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Long), Screw; 5/16" X 3/4" (213, 215, And 216), Screw; 5/16" X 3/4" (Rh), Screw; 5/16" X 3/4" Lh, Screw; 5/16" X 3/4" (2 Used, With Grain Tank Extension; 3 Used, Without Grain Tank Extension), Screw; 5/16" X 3/4" (Sub For 19h1936), Screw; 5/16" X 3/4", (Use With Round Hole Sieve), Screw; 5/16" X 3/4" (Used With Straw Chopper), Screw; 5/16" X 3/4" (Sub For 19h2021), Screw; 5/16" X 3/4" (Use With Rd. Hole Sieve), Screw; 5/16" X 3/4" (Use With N10213), Screw; 5/16" X 3/4" (Use With Round Hole Sieve), Screw; 7.925 X 19.050 mm, Screw; 5/16" X 3/4" (Use With 12h303 And 28h1511), Screw; 5/16" X 3/4", (Sub For Mg87872), Screw; 5/16" X 3/4", (Sub N10212, This Application), Screw; 5/16" X 3/4", Germany, Screw; 5/16" X 3/4" (Heat Shield To Vent Base), Screw; (A: ( -Xxxxxx) 4650-01***35) 5/16" X 3/4", Screw; 5/16"-18 Unc X3/4", Screw; 5/16" X 3/4", (Hinson Cab), Screw; 5/16" X 3/4" (Fixed Hole Sieve), Screw; 5/16" X 3/4", (Used With Round Hole Sieve), Screw; 5/16" X 3/4", (Corn Head), Screw; 5/16" X 3/4" (Use With Straw Chopper), Screw; (A: ( -Xxxxxx) 4050-00***45; 4250-01***92; 4450-02***58) 5/16" X 3/4", Screw; 5/16"X3/4", Screw; 5/16" X 3/4", Fastener (High-Drum), Cap Screw; 5/16" X 3/4", Screw; (Code 6204), Screw; (Use With R112197), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785) (Use With Round Hole Sieve), Screw; W/ Multi-Crop, Screw; (B: (Xxxxxx- ) 4650-01***36) 5/16" X 3/4", Screw; 5/16" X 3/4", (Code 6204), Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Regular And Long Fixed Drive), Screw; 5/16" X 3/4", (R.H. Side), Screw; (A) 5/16" X 3/4", Screw; X 5/16" X 3/4", Screw; (A: Sound-Gard Body) 5/16" X 3/4", Screw; 5/16" X 3/4", Use With Endwise Transport, Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4", (10 Used, Regular; 14 Used, Long), Screw; (B) 5/16" X 3/4", Screw; 5/16" X 3/4", (Sub For H1085r), Screw; 5/16" X 3/4", (Corn Head And Three-Row Narrow Row-Crop Units), Screw; 5/16" X 3/4" (Use With 12h303), Screw; (Sub For F1002012), Screw; 5/16"X3/4, Screw; 5/16" X 3/4", Use With Amt, Screw; 5/16" X 3/4" (Use With R122725), Screw; 5/16"X1", Screw; 5/16" X 3/4" L.H., Screw; 5/16" X 3/4" (Straw Chopper), Screw; 5/16" X 3/4" (Sub For Am121752), Screw; 5/16" X 3/4", (10 Used, Regular; 12 Used, Long), Screw; 5/16" X 3/4", (3 Used, 347; 4 Used, 467), Screw; (A) (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (C), Screw; 5/16" X 3/4" (Serviced In Ah93991), Screw; 5/16" X 3/4" (A), Screw; 5/16"-18 Nc X 3/4", Screw; 5/16" X 3/4", Less Spout-Trak, Screw; 5/16", Screw; 5/16" X 3/4" (To Transmission Input Housing), Screw; X X X 5/16" X 3/4", Screw; 5/16" X 3/4", For Endwise Transport, Screw; 5/16" X 3/4", (Cornhead Attachment), Screw; 5/16" X 3/4" Rh, Screw; 5/16" X 3/4" (Rh Side), Screw; 5/16" X 3/4", (Hinson), Screw; 5/16" X 3/4", (Used With Rd. Hole Sieve), Screw; 5/16" X 3/4", (Regular), Screw; 5/16" X 3/4" (Outlet), Screw; 5/16" X 3/4", (Insecticide Only), Screw; (B) 5/16" X 3/4", Control Support Side, Screw; 5/16" X 3/4", (Less Air Conditioner), Screw; (A: W/Cab) 5/16" X 3/4", Screw; 5/16" X 3/4", (12 Used, Regular; 16 Used, Long) | 1 |
| A3***02 | Stud | 1 |
| A3***03 | Socket, Gasket; - Outlet, Serial Range: Elbow-Head, Gasket; - Elbow, Gasket; Water Outlet Elbow, Gasket; - Water Outlet Elbow, Gasket; Water, Outlet, Elbow, Gasket; Elbow, Gasket; Gasket -, Serial Range: Elbow-Head, Gasket; Elbow To Cylinder Head | 1 |
Jack All Sizes [B24]
John Deere : 375 - Disk : Jack All Sizes [B24]
| AA***55 | Jack, Jack; (Illustrated) See Grid G13 | 1 |
| AA***92 | Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00***26; 7700-00***20; 7800-01***50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650 | 1 |
| AA***70 | Handle; (A: Knob Type), Handle; (A), Handle; For Jack With Green Knob, Handle, Handle; For Jack With Green Knob., Handle; Knob Type, Handle; Green, Handle; For Jack With Green Handle, Handle; (Sleeve Type), Handle; (Knob Type), Handle; (Sub For Aa27831), Grey Knob, Handle; (Sub Pt18656), Handle; (Knob Type) (Sub Pt18656) | 1 |
Labels All Sizes [C05]
John Deere : 375 - Disk : Labels All Sizes [C05]
| A2***88 | Label; (Sub A33376) Model Designation, 90 mm (3-1/2") Main Frame, Right Side, One On Outside Of Long Tube, Main Frame, Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link, Label; (Sub A33376) "Model Designation Kit" - Located On Main Frame Right Side, One On Outside Of Long Tube; Main Frame Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link | 3 |
| A4***66 | Sign; (Sub Aa32091) Model Designation, 100 mm (3-13/32") Main Frame, Right Side, On Outside Of Long Tube, Main Frame, Left Side, On Outside Of Long Tube. | 2 |
| AA***91 | Kit; "Model Designation Kit" Located On Right Side Main Frame. One On Outside Of Long Tube; Main Frame Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link, Kit; "Model Designation" One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Kit; "Model Desgination" One On R.H. Side Of Main Frame And One On L.H. Side Of Main Frame., Kit; "Model Designation" Located On Outside Of Each Wing, Kit; "Model Designation" One On R.H. Side Of Main Frame, And One On L.H. Side Of Main Frame., Kit; "Model Designation" Centered On Right Side Of Truss Tube Between Front Standards, Kit; "Model Designation Kit" 75mm, Kit, Kit; "Model Designation" One On Each Side Of Main Frame, Kit; "Model Designation" Kit, Outside And Front Of Truss Tube, Kit; Model Number Repair, Kit; "Model Designation" (One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Kit; Model Number Repair, (Sub An232259), Kit; Kit, Model Number Repair, Kit; "55" - Located On R.H. Mast Plate, Kit; "Model Designation" Centered On Left Side Rear Of Main Frame Tube | 2 |
Leveling Rod And Pivot All Sizes [A19]
John Deere : 375 - Disk : Leveling Rod And Pivot All Sizes [A19]
| 03***61 | Bolt, Bolt; 3/4" X 2-3/4" | 2 |
| 11***38 | Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm | 2 |
| 14***72 | Nut; 1", Slotted, Nut; 1" Unc Slotted, Nut; 1" Slotted, Nut; 1", Nut; 1" Unc, Slotted, Nut; 1", (Sub For Mg281042), Nut; 1" 1" Slotted, Nut; (A) 1" Slotted | 1 |
Locators And Clamp 9" (230 Mm) And 11" (280 Mm) Spacing All Sizes [A22]
John Deere : 375 - Disk : Locators And Clamp 9" (230 Mm) And 11" (280 Mm) Spacing All Sizes [A22]
| 08***47 | Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2" | 8 |
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 8 |
| 28***58 | Bushing; 1.380" X 1.660" X 1-1/2", Bushing, Bushing; (A) 1-1/4" X 1-1/2" | 2 |
Main Frame And Gang Attachments, Left Side All Sizes [A13]
John Deere : 375 - Disk : Main Frame And Gang Attachments, Left Side All Sizes [A13]
| 08***73 | Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C) | 2 |
| 08***79 | Cap Screw; 1-1/4" X 18", Cap Screw; 1-1/4" X 18", For 17'10" Size Only | 8 |
| 08***83 | Cap Screw; 1" X 12-1/2" | 4 |
Main Frame And Gang Attachments, Right Side All Sizes [A11]
John Deere : 375 - Disk : Main Frame And Gang Attachments, Right Side All Sizes [A11]
| 03***65 | Bolt, Bolt; (C) (D) 3/8" X 3", Bolt; 3/8" X 3" (913-5 Used; 915-6 Used; 918-7 Used; 920, 922-8 Used; 925-10 Used; 930-11 Used), Bolt; 3/8" X 3", Bolt; (Use With 24h1219), Bolt; 3/8" X 3", (Use With 12h304 And 14h1076), Bolt; (A) (B) 3/8" X 3", Bolt; (B) 3/8" X 3", Bolt; 3/8" X 3" (213-5;215 & 216-6;218-7;220-8), Bolt; 3/8" X 3", Fertilizer Opener | 1 |
| 03***75 | Bolt; 3/8" X 2" | 1 |
| 08***73 | Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C) | 3 |
Reflector And Bracket All Sizes [B23]
John Deere : 375 - Disk : Reflector And Bracket All Sizes [B23]
| 14***78 | Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 10 | 2 |
| 14***93 | Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot) | 1 |
| 21***48 | Screw; 0.190" X 3/4", (Use With Pt9543 Bracket), Screw; 0.190" X 3/4", Red And Amber, Screw; 0.190" X 3/4", Screw; 0.190" X 3/4", Use With Amber And Red Reflectors, Screw; 0.190" X 3/4", Use With Amber And Red Reflector, Screw; 0.190" X 3/4" (A), Screw; Red And Amber, Screw; (A) 0.190" X 3/4", Screw; 0.190" X 3/4", Canada Only, Screw; 4.826 X 19.050 mm, Screw; 4.826 X 19.050 mm (0.190" X 3/4") | 2 |
Safety Chain (1984- ) [A08]
John Deere : 375 - Disk : Safety Chain (1984- ) [A08]
| 19***22 | Cap Screw; M24 X 70, Cap Screw; M24 X 70, (Sub For Ffsb104211 Or J912470) | 1 |
| 34***48 | Spring Pin; 1/8" X 13/16", Used With 20,000 Lbs. Chain, Spring Pin; 1/8" X 13/16", (Use With 20,000 Lb Chain), Spring Pin; 1/8" X 13/16" (Use With Ar90579 Or Ar90583), Spring Pin; 1/8" X 13/16", Spring Pin; 1/8" X 13/16", Spring Pin; (B: 20, 000 Lb.) 1/8" X 13/16", Spring Pin, Spring Pin; (A) 1/8" X 13/16", Spring Pin; 1/8" X 13/16" (A), Spring Pin; 1/8" X 13/16", 6-Row Narrow W/Split Row, Spring Pin; 1/8" X 13/16" (Sub Z9785h), Spring Pin; 1/8"X13/16" (Sub For 34h42) | 1 |
| A3***71 | Lock Nut; For Safety Chain Attachment, Lock Nut; M24, Lock Nut, Lock Nut; (A: Used With Tow-Between Cart), Lock Nut; (A: Used With Tow-Between Cart) (Use With Aa58159 And Aa65069), Lock Nut; (A: Lock-Out), Lock Nut; Lock-Out, Lock Nut; 59' Only, Lock Nut; M24 Lock-Out, Lock Nut; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) | 1 |
Smv, Slow Moving Vehicle, Emblem And Bracket All Sizes [B22]
John Deere : 375 - Disk : Smv, Slow Moving Vehicle, Emblem And Bracket All Sizes [B22]
| 14***86 | Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-70***00) 9550sh (-70***00)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-70***00) & 9750sts (-70***00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4" | 2 |
| 21***02 | Screw; 1/4" X 5/8" (Use With 14h786), Screw; 1/4"X5/8", Screw; 1/4" X 5/8", Screw; 1/4" X 5/8", Use With Endwise Transport | 2 |
| A1***62 | Bracket; (B), Bracket; Wide Frame, Sleeve; - Spool, Forward & Reverse, A16664 Selector Valve Assembly Used Transmission Serial No., Serial Range: 18213-23079, Bracket | 1 |
Spindle, Hub, And Wheel [A21]
John Deere : 375 - Disk : Spindle, Hub, And Wheel [A21]
| 19***23 | Cap Screw; 3/8" X 3-1/4", (Row-Crop), Cap Screw; 3/8" X 3-1/4", (Sub 19h2855), Cap Screw; 3/8"X2-3/4", Cap Screw; 3/8" X 3-1/4", (Rc, St And Ru), Cap Screw; 3/8" X 3-1/4", (Use With E71349), Cap Screw; (A) 3/8"X3-1/4", Cap Screw; 3/8" X 3-1/4" 7/16", Cap Screw; 3/8" X 3-1/4" Rear, Cap Screw; 3/8"X3/4", Cap Screw; (A) 3/8" X 3-1/4", Cap Screw; (Code 3102), Cap Screw; 3/8x3-1/4", Cap Screw; (A: ( -Xxxxxx) 4650-01***34; 4850-00***87) 3/8" X 3-1/4", Cap Screw; 3/8"X3-1/4", Cap Screw; (Less Fan Guard), Cap Screw; (B) 3/8" X 3-1/4", Cap Screw; 3/8" X 3-1/4", (Use With Peanut Shield Only), Cap Screw; 3/8" X 3-1/4", (Less 4-Post Roll-Gard Or Sound-Gard Body), Cap Screw; 3/8" X 3-1/4", (Sub For Gf24616) For 760, Cap Screw; 3/8" X 3-1/4", (Less Rockshaft), Cap Screw; (A: Not Used In U.S. And Canada) 3/8" X 3-1/4" Rear, Cap Screw; 3/8" X 3-1/4" , Up, (Sub For 19h2815, This Application), Cap Screw; 3/8"X3"-1/4" (Sub For 19h2128), Cap Screw; 3/8" X 3-1/4", Use With Peanut Shield, Cap Screw; 3/8" X 3-1/4" (Less Fan Guard) (4250, 4450, 4650, 4850), Cap Screw; X 3/8" X 3-1/4", Cap Screw; 3/8" X 3-1/4", Cap Screw; 3/8" X 3-1/4" (Less Fan Guard), Cap Screw; 3/8"X3", Cap Screw; 3/8" X 3-1/4" 3/8" X 3-1/4", Cap Screw; 3/8"X3-1/4" (Sub For 19h2128), Cap Screw; 3/8"X3"-1/4", Cap Screw; 3/8" X 3-1/4" (4050, 8450), Cap Screw, Cap Screw; 3/8"X3-1/4", (Sub For 19h2128), Cap Screw; (A: Not Used In U.S. And Canada) 3/8" X 3-1/4" Front | 1 |
| 24***56 | Washer; 1-1/32" X 2" X 0.194", (Sub 24h1138), Washer; 1-1/32" X 2" X 0.194", Washer; 1-1/32" X 2" X 0.194", (Sub For Na1628) | 1 |
| 28***13 | Spacer; 1-1/2" X 1.900" X 2", Spacer, Spacer; 1-1/2" X 2" | 1 |
Truss Bar All Sizes [A15]
John Deere : 375 - Disk : Truss Bar All Sizes [A15]
| 11***30 | Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00***13), 5403 (-00***75)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (69***01-) 9550sh (69***01-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 44***60-, 5520: Sn 45***01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm | 1 |
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 2 |
| 19***84 | Cap Screw; 3/4" X 4-1/2" (A), Cap Screw; 3/4" X 4-1/2", (Or, Rs, Ut), Cap Screw; 3/4" X 4-1/2", Cap Screw; (A: Included In Ar90577) 3/4" X 4-1/2", Cap Screw; (A), Cap Screw; 3/4" X 4-1/2", (Also Order 14h794), Cap Screw; 3/4" X 4-1/2", For Rear Bracket Only, Cap Screw; (C) 3/4" X 4-1/2", Cap Screw; 3/4" X 4-1/2" (Sub For Mg88007), Cap Screw; (A) 3/4" X 4-1/2", Cap Screw; 3/4" X 4-1/2" (Use With Ar90577), Cap Screw; 3/4" X 4-1/2" (Use W/ Ar90577), Cap Screw; 3/4" X 4-1/2", For Tractors Equipped With 800 Series 3-Point Hitch, Cap Screw; 3/4" X 4-1/2" (Sub For (4) Mg88007), Cap Screw; 3/4" X 4-1/2" (Use With 12h236), Cap Screw; (A: Category Iv) 3/4" X 4-1/2" | 2 |
Wear Guard [C04]
John Deere : 375 - Disk : Wear Guard [C04]
| 03***98 | Bolt; 1/2" X 3-1/4" | 1 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 1 |
| 19***01 | Cap Screw; 3/8" X 2", (Use With 12h304), Cap Screw; 3/8" X 2", (Slow Speed), Cap Screw; 3/8" X 2", Cap Screw; 3/8" X 2", (1 Used, 3940) (2 Used, 3960), Cap Screw; 3/8" X 2" (Use With H86656), Cap Screw; (A) 7.50-18 3/8x2", Cap Screw; 3/8" X 2" (Sub 19h3065), Cap Screw; 3/8" X 2", (Na-G, Na-L), Cap Screw; 9.525 X 50.800 mm (3/8" X 2") Longitud=124mm (4.88") Frente=M10, Cap Screw; 3/8" X 2", (Sub 19h2065), Cap Screw; (B) 3/8"X2", Cap Screw; 3/8" X 2" (Use With H110088), Cap Screw; (A) 3/8" X 2", Cap Screw; (B) 3/8" X 2", (Front Right Side Hole), Cap Screw; 3/8"X2 (Sub For 19h1726 Appl), Cap Screw; 3/8"X2" (Sub For 19h255), Cap Screw; 3/8" X 2" (For Ar74369), Cap Screw, Cap Screw; (K1) 3/8" X 2", Cap Screw; 3/8" X 2" (W/ E50102) (Sub For Y5550b, 11h236), Cap Screw; 3/8" X 2" (W/ E50102 ) (Sub For Cc16203 Or P47141), Cap Screw; 3/8" X 2" (Less Differential Lock), Cap Screw; 3/8" X 2", Diesel, Cap Screw; 3/8" X 2", (Ea-6, Ge-01), Cap Screw; 3/8" X 2", (1 Used Gasoline) (2 Used Diesel), Cap Screw; 3/8" X 2", (Code 2101, 2102, Or 2109), Cap Screw; 3/8" X 2" (Dh-01, Dh-02, Hc-D), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2" 3/8" X 2", Cap Screw; (A) 3/8"X2", Cap Screw; 3/8" X 2" (W/ E50102) (Sub For Cc16203, 11h236), Cap Screw; 3/8" X 2" (W/ E50102) (Sub For Cc16203 Or P47141), Cap Screw; 3/8" X 2" Up, For Key 3, Cap Screw; 3/8" X 2" (Slow Speed), Cap Screw; 3/8" X 2" (Use With 12h304 And 14h812), Cap Screw; 3/8" X 2", (Code 2108), Cap Screw; 3/8" X 2", (Use With Ar55094), Cap Screw; 3/8" X 2", R.H., Cap Screw; (B) 3/8" X 2", Cap Screw; 3/8"X2" (Sub For 19h1800), Cap Screw; 3/8" X 2" (For R66794), Cap Screw; 3/8" X 2", (Diesel), Cap Screw; 3/8" X 2", Right Front Side Hole, Cap Screw; 3/8" X 2" (For 50 And 60 Ft), Cap Screw; 3/8"X2" (For R66794), Cap Screw; 3/8"X2", Cap Screw; 3/8"X2" (For Al17507), Cap Screw; 3/8" X 2" 3/8" X 2" (Qrt), Cap Screw; 3/8" X 2" (Sub 19h2065), Cap Screw; 3/8" X 2" (Use With 14h812), Cap Screw; 3/8" X 2", (Use With Ar91662), Cap Screw; 3/8" X 2" (Gasoline), Cap Screw; 3/8" X 2", (Hb-G, Gh-01), Cap Screw; 3/8" X 2", Cap Screw; 3/8" X 2", (Sub 19h3065), Cap Screw; 3/8" X 2" (For Ar97712), Cap Screw; (B: Hi-Crop) 3/8" X 2", Cap Screw; 3/8" X 2", (3.7 M (12-Ft.), 22 Used Per Tooth Bar) (4.3 M (14-Ft.), 27 Used Per Tooth Bar) (4.9 M (16-Ft.), 30 Used Per Tooth Bar), Cap Screw; 9.525 X 50.800 mm (3/8" X 2"), Cap Screw; 3/8" X 2", (Use With Ar45483) | 1 |
Wheel Frame All Sizes [A18]
John Deere : 375 - Disk : Wheel Frame All Sizes [A18]
| AA***22 | Axle; L.H. | 1 |
| AA***23 | Axle; R.H. (Illustrated) | 1 |
Wheel Frame Hydraulic Cylinder (For 1000 Psi System) 127 Mm Bore X 304.8 Mm Stroke (5" X 12") All Sizes [B21]
John Deere : 375 - Disk : Wheel Frame Hydraulic Cylinder (For 1000 Psi System) 127 Mm Bore X 304.8 Mm Stroke (5" X 12") All Sizes [B21]
| 22***42 | Set Screw; 1/4" X 5/16", Set Screw; 1/4" X 5/16", (Use With A22156), Set Screw | 1 |
| A3***73 | Piston | 1 |
| A3***74 | Guide | 1 |
Wheel Frame Hydraulic Cylinder (For 2250 Psi System) 88.9 Mm Bore X 304.8 Mm Stroke (3-1/2" X 12") [B20]
John Deere : 375 - Disk : Wheel Frame Hydraulic Cylinder (For 2250 Psi System) 88.9 Mm Bore X 304.8 Mm Stroke (3-1/2" X 12") [B20]
| 22***42 | Set Screw; 1/4" X 5/16", Set Screw; 1/4" X 5/16", (Use With A22156), Set Screw | 1 |
| A2***19 | Piston, Piston; (Sub Re19696) | 1 |
| A2***45 | Guide | 1 |
Wheel Frame Hydraulic Cylinders, Safety Lock, Hoses And Fittings All Sizes [B18]
John Deere : 375 - Disk : Wheel Frame Hydraulic Cylinders, Safety Lock, Hoses And Fittings All Sizes [B18]
| 11***40 | Cotter Pin; (B: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm (Hs=10.9), Cotter Pin; (A: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6,3 X 50mm, Cotter Pin; 6.300 X 50 mm, Category Ii, Cotter Pin; (D) 0.248" X 1.969", Cotter Pin; 6.300 X 50 mm, (Use With N186178), Cotter Pin; 6.300 X 50 mm (For P74011), Cotter Pin; 6.300 X 50 mm (Use With N186178), Cotter Pin; 6.300 X 50 mm (For A89333 And A89334), Cotter Pin; 6.300 X 50 mm, (4 Used With 3-Point Hitch, 8 Used With Loader), Cotter Pin; (B: Pull-Type Rotary Cutter Only) 6.300 X 50 mm, Cotter Pin; (B) 0.248" X 1.969", Cotter Pin; 6 X 50 mm (Sub For 11m1416), Cotter Pin; (A: 12'-6" To 27'-6") 6.300 X 50 mm, Cotter Pin, Cotter Pin; 6.300 X 50 mm, Cotter Pin; (A: Baler With Precutter) 6.300 X 50 mm, Cotter Pin; (B: For Baletrak) 6.300 X 50 mm, Cotter Pin; 6,3x50mm, Cotter Pin; (A: Hitch) 6.300 X 50 mm (Cat-Ii), Cotter Pin; 6,3 X 50 mm, Cotter Pin; 6.300 X 50 mm (0.248" X 1.969"), Cotter Pin; 6.300 X 50 mm, (Use Without Mechanical Front Wheel Drive), Cotter Pin; (D: Not For Elc Plus Monitor) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm, (Sub For 11h249), Cotter Pin; 0.248" X 1.969" | 16 |
| 14***10 | Nut; 7/8", Unf, Nut; 7/8", Jam, Nut; 7/8", Nut; 7/8" (Sub For F79117g5), Nut; 7/8", Nut; 7/8", Unf, Jam | 8 |
| 24***49 | Washer; (A) 30 mm (Sub For 24m3533), Washer; 1-9/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X 0.060", With Iron-Gard, Washer; 1-9/32" X 1-11/16" X 0.060", Washer; 19/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X .060", Washer; 1-9/32" X 1-11/16" X 0.060" Without Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060" With Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060", (3 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", (2 Used Nominal, With Iron-Gard) (5 Used Nominal, Less Iron-Gard), Washer; (A: Option) 1-9/32" X 1-11/16" X 0.060", Washer; 1-9/32" X 1-11/16" X 0.060", (2 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", Without Iron-Gard, Washer | 16 |
Need a specific 375 - DISK part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.
Post a parts request and compare supplier quotes.