John Deeredisk(no series)

John Deere 370 - DISK

Specifications · OEM parts breakdown

Search live 370 - DISK partsSource or supply its parts

Post a parts request and compare supplier quotes.

John Deere 370 - DISK specifications

Engine

Engine model6081H
Gross Power183.7 kW (246.3 HP)
Net Power175 kW (235 HP)

Weights

Operating Weight81200 lbs (36832 kg)

Performance

Max Travel Speed4.8 km/h (3 mph)
Swing Speed10.9 RPM
Max Digging Depth671 cm (264 in.)

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

All 370 - DISK assemblies by section

Every catalogued assembly group for the John Deere 370 - DISK. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Caster Wheel, Axle, And Support [C07]
John Deere : 370 - Disk : Caster Wheel, Axle, And Support [C07]
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)4
08***36Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"4
10***26Bolt; 3/8"X1", Rh, Bolt; 3/8" X 1", Bolt; (A) 3/8" X 1", 3 Head Plow Bolt, Bolt; 3/8" X 1", Plow, R.H., Bolt; 3/8" X 1", (200), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (W/O Bale Ramps), Bolt; 3/8" X 1", R.H., Bolt; 3/8" X 1" 3/8" X 1" (Use With E86515) Plowbolt, Bolt; 3/8" X 1", (14 Used, Regular; 12 Used, Long), Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", No. 3, Bolt; 3/8"X1", Bolt; 3/8" X 1" 3/8" X 1" (Use With Fh304145) Plowbolt, Bolt; 3/8" X 1" (Use With Fh304145)3/8"X 1" Plowbolt, Bolt; 3/8" X 1" R.H., Bolt; (A: For Steel Moldboard) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X 1" (Use With Fh304145)Plowbolt, Bolt; (B: 24 And 224 Balers) 3/8" X 1", Bolt; (A) 3/8" X 1", Bolt; 3/8"X1",Rh, Bolt; 3/8" X 1" (Nlr), Bolt; 3/8" X 1" (Regular), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1" 3/8"X 1" (Use With Fh304145) Plowbolt, Bolt, Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" 3/8" X 1" Plowbolt, Bolt; 3/8" X 1" (14 Used, Regular; 12 Used, Long), Bolt; 3/8" X 1", (300)4
See all parts with full part numbers in Heavy Parts AI →
Combination Furrow Filler Scraper (1978- ) [B24]
John Deere : 370 - Disk : Combination Furrow Filler Scraper (1978- ) [B24]
19***81Cap Screw; 1/2" X 2-1/2", Cap Screw; (B) (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (For T28025), Cap Screw; 1/2" X 3-1/2" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3-1/2", (If Machine Is Equipped With Auxiliary Hydraulic System), Cap Screw; (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Sub For 19h1945), Cap Screw; (B) (D) 1/2" X 3-1/2", Cap Screw; (C) (D) 1/2" X 3-1/2", Cap Screw; (A) 1/2" X 3-1/2", Cap Screw; 1/2"X3-1/2", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/2", Cap Screw; (E) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", Use With Key 3 Only, Cap Screw; 1/2" X 3-1/2" (A), Cap Screw; (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With A21163 Or A21164), Cap Screw; (A) (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Use With Light Bracket On Integral And Drawn Flexible Models), Cap Screw; 1/2" X 3-1/2", (4 Used On R.H. And L.H. Outside Of Machine), Cap Screw; 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheels), Cap Screw; (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheel), Cap Screw; (F) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (A) (B), Cap Screw; 1/2" X 3-1/2", Rear Hinge, Cap Screw; 1/2" X 3-1/2", Center Hinge, Cap Screw; 1/2" X 3-1/2" (Rh), Cap Screw; (B) (C) (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", R.H., Cap Screw; 1/2"X3-1/2" Unc, Cap Screw; 1/2" X 3-1/2", (Sub For Mg88273), Cap Screw; 1/2" X 3-1/2", (Front Hinge), Cap Screw; (B) 1/2" X 3-1/2", When Clips Are Used, Cap Screw; 1/2"X3-1/2" (For T28025)1
19***15Cap Screw; 1/2" X 1-1/4", North America, Cap Screw; 1/2" X 1-1/4" (Use With Ty15819, Ty16043, Ty15270 Or Ty16044), Cap Screw; 12.700 X 31.750 mm (1/2" X 1-1/4"), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (For Ty15270, Ty15819, Ty16043 And Ty16044), Cap Screw; 1/2" X 1-1/4" (Use With Re63295), Cap Screw; 1/2" X 1-1/4" (Use With 12h301), Cap Screw; 1/2" X 1-1/4" Nlr, Cap Screw; 1/2" X 1-1/4", (50 Per Package) (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4", (24 Used For 714, 714a; 28 Used For 716, 716a), Cap Screw; 1/2" X 1-1/4" Fenders, Cap Screw; 1/2" X 1-1/4", (Use With M46075), Cap Screw; 1/2 X 1-1/4", Cap Screw; (B) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (17 Used For Front Chain Shields, 26 Used For Rubber Shields, 10 Used For Steel Or Rear Chain Shields), Cap Screw; 5/8" X 2-1/2", Cap Screw; 1/2" X 1-1/4" (For Channel Tongue), Cap Screw; 1/2" X 1-1/4", (18 Used On Front Chain Shields, 26 Used On Rubber Shields, 10 Used On Rear Steel Or Chain Shields), Cap Screw; (A) (B) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Code 2306 And 2307, Cap Screw; 1/2" X 1-1/4" (Rh Side), Cap Screw; (A: Oversize Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", For 760 And 790, Cap Screw; 1/2x1-1/4", Cap Screw; 1/2" X 1-1/4" (Flexible), Cap Screw; 1/2" X 1-1/4" (Rh), Cap Screw; 1/2" X 1-1/4", (Sub For 19h1792), Cap Screw; (E) 1/2" X 1-1/4", Cap Screw; (B: Manual Hitch) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (50 Per Package) (Not Included With Piston Pump) (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4", (Sub For Ffsb109249), Cap Screw; (A) 1/2"X1-1/4", Cap Screw; (C) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" Lh, Cap Screw; 1/2" X 1-1/4", (Use With N202131), Cap Screw; 12.700 X 31.750 mm, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/4", (See Front Idler Support Plates), Cap Screw; (A: Os Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Lh, Cap Screw; 1/2" X 1-1/4" (Use With E54809), Cap Screw; 1/2" X 1-1/4", (For Channel Tongue), Cap Screw; (F) 1/2" X 1-1/4", Cap Screw; (A: (-Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (W/ Ae33160), Cap Screw; 1/2" X 1-1/4" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/4", (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (540rpm), Cap Screw; 1/2" X 1-1/4", 50 Per Package, (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4" (Flex), Cap Screw, Cap Screw; 1/2" X 1-1/4" 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 1/4", Cap Screw; (D) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 1-1/4", (6" Spacing), Cap Screw; (A) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Use With R110440), Cap Screw; 1/2" X 1-1/4", (For 14 Rotary Hoe), Cap Screw; 1/2" X 1-1/4", Fold Top, Cap Screw; 1/2" X 1-1/4", (Use With An210950), Cap Screw; 1/2"X2", Cap Screw; 1/2" X 1-1/4", (Use With Gd1072), Cap Screw; (E) 1/2" X 1-1/4", Front Gang, Cap Screw; (B: To Be Used With Oversize Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Code 2309 And 2310, Cap Screw; 1/2" X 1-1/4", (Use With Re63295), Cap Screw; 1/2" X 1-1/4", L.H., Cap Screw; (W) (F) 1/2" X 1-1/4", Cap Screw; 12.700 X 31.750 mm (1/2" X 1-1/4"), Cap Screw; 1/2" X 1-1/4", (Ru And Or), Cap Screw; 1/2" X 1-1/4", Rear Gang, Cap Screw; 1/2" X 1-1/4", (L.H. Only), Cap Screw; R.H., Cap Screw; 1/2" X 1-1/4" (Use With 14h1040 And 12h301), Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2"X1-1/4", Cap Screw; X 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Plateless Planting Unit, Cap Screw; 1/2" X 1-1/4", (Use With R110440), Cap Screw; X 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (Use With 12h304 And 14h1040), Cap Screw; 1/2" X 1-1/4" Hs, Sae 81
19***20Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer)1
See all parts with full part numbers in Heavy Parts AI →
Combination Scrapers (1978- ) 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [B19]
John Deere : 370 - Disk : Combination Scrapers (1978- ) 230 Mm (9") Spacing 10.9 M (36'0") And 12.3 M (40'4") Sizes [B19]
03***56Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors)34
19***20Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer)104
19***20Cap Screw; 1/2" X 3-1/4", (Sub For Gf25165), Cap Screw; (E) (F) 1/2" X 3-1/4", Cap Screw; (F) 1/2" X 3-1/4", Cap Screw; (A) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" Use With Sae 4 Flywheel Hsg, Cap Screw; (D) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; 1/2"X3-1/4" (For L29021), Cap Screw; (B) (C) 1/2" X 3-1/4", Cap Screw; (Amrked R77714), Cap Screw; 1/2" X 3-1/4", (Sub For 19h1945), Cap Screw; (A) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With Sae 4 Flywheel Housing), Cap Screw; (C) 1/2" X 3-1/4", Cap Screw; (Marked R77714), Cap Screw; 12.700 X 82.550 mm, Cap Screw; (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With H110290 Or H119210), Cap Screw; 1/2" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/4" (On Wing) (Hs, Sae 8), Cap Screw; 1/2" X 3-1/4" ((Hs, Sae 8), Cap Screw; 1/2"X3-1/4", Cap Screw; (B) 1/2" X 3-1/4", Cap Screw; (A) 1/2" X 3-1/4", Cap Screw; (E) 1/2" X 3-1/4", Cap Screw; (C) (D) 1/2" X 3-1/4", Cap Screw, Cap Screw; 1/2" X 3-1/4", (With Single Spacer), Cap Screw; 1/2"X3-1/4" |, Cap Screw; 1/2" X 3-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 3-1/4" Hs, Sae 8, Cap Screw; 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D) (B) 1/2" X 3-1/4", Cap Screw; (B) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (For Drawn Flexible Main Frame And Wing), Cap Screw; (N: 10 Foot Main Frame Model) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D), Cap Screw; 1/2" X 3-1/4", For 790, Cap Screw; (E) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (Use With H110290 Or H119210)40
See all parts with full part numbers in Heavy Parts AI →
Combination Scrapers (1978- ) 280 Mm (11") Spacing 10.8 M (35'4") And 12.3 M (40'6") Sizes [B21]
John Deere : 370 - Disk : Combination Scrapers (1978- ) 280 Mm (11") Spacing 10.8 M (35'4") And 12.3 M (40'6") Sizes [B21]
03***56Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors)34
19***20Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer)88
19***20Cap Screw; 1/2" X 3-1/4", (Sub For Gf25165), Cap Screw; (E) (F) 1/2" X 3-1/4", Cap Screw; (F) 1/2" X 3-1/4", Cap Screw; (A) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" Use With Sae 4 Flywheel Hsg, Cap Screw; (D) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; 1/2"X3-1/4" (For L29021), Cap Screw; (B) (C) 1/2" X 3-1/4", Cap Screw; (Amrked R77714), Cap Screw; 1/2" X 3-1/4", (Sub For 19h1945), Cap Screw; (A) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With Sae 4 Flywheel Housing), Cap Screw; (C) 1/2" X 3-1/4", Cap Screw; (Marked R77714), Cap Screw; 12.700 X 82.550 mm, Cap Screw; (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With H110290 Or H119210), Cap Screw; 1/2" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/4" (On Wing) (Hs, Sae 8), Cap Screw; 1/2" X 3-1/4" ((Hs, Sae 8), Cap Screw; 1/2"X3-1/4", Cap Screw; (B) 1/2" X 3-1/4", Cap Screw; (A) 1/2" X 3-1/4", Cap Screw; (E) 1/2" X 3-1/4", Cap Screw; (C) (D) 1/2" X 3-1/4", Cap Screw, Cap Screw; 1/2" X 3-1/4", (With Single Spacer), Cap Screw; 1/2"X3-1/4" |, Cap Screw; 1/2" X 3-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 3-1/4" Hs, Sae 8, Cap Screw; 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D) (B) 1/2" X 3-1/4", Cap Screw; (B) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (For Drawn Flexible Main Frame And Wing), Cap Screw; (N: 10 Foot Main Frame Model) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D), Cap Screw; 1/2" X 3-1/4", For 790, Cap Screw; (E) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (Use With H110290 Or H119210)36
See all parts with full part numbers in Heavy Parts AI →
Decals [C10]
John Deere : 370 - Disk : Decals [C10]
A2***88Label; (Sub A33376) Model Designation, 90 mm (3-1/2") Main Frame, Right Side, One On Outside Of Long Tube, Main Frame, Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link, Label; (Sub A33376) "Model Designation Kit" - Located On Main Frame Right Side, One On Outside Of Long Tube; Main Frame Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link3
A3***76Label; (Sub Aa32091) "Model Designation" 75 mm (2-61/64") Centered On Left Side Rear Of Main Frame Tube, Label; (Sub Aa32091) "Model Designation" - One On Outside Of Each Wing, Label; (Sub Aa32091) "Model Designation" One On Right Side Of R.H. Main Frame And One On Left Side Of L.H. Main Frame, Label; (Sub Aa32091) "Model Designation Kit" - Located On Main Frame Right Side, One On Outside Of Long Tube; Main Frame Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link, Label; (Sub Aa32091) Kit, Model Designation, 75 mm (3") - One On Outside Of Long Frame Tube And One On Outside Of Short Frame Tube, Label; (Sub Aa32091) "Model Designation" - Located On Outside Of Each Wing, Label; (Sub Aa32091) "Model Designation" One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Label; (Sub Aa32091) Model Designation 75 mm (3") Centered On Left Side Rear Of Main Frame Tube, Label; (Sub Aa32091) 75 mm (3") (Centered On Right Side Of Truss Tube Between Front Standards), Label; (Sub Aa32091) Kit, Model Designation, Outside And Front Of Truss Tube, Label; (Sub Aa32091) "Model Designation" 70 mm (2-3/4") Centered On Right Side Of Truss Tube Between Front Standards, Label; (Sub Aa32091) "Model Designation Kit" 75mm3
AA***91Kit; "Model Designation Kit" Located On Right Side Main Frame. One On Outside Of Long Tube; Main Frame Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link, Kit; "Model Designation" One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Kit; "Model Desgination" One On R.H. Side Of Main Frame And One On L.H. Side Of Main Frame., Kit; "Model Designation" Located On Outside Of Each Wing, Kit; "Model Designation" One On R.H. Side Of Main Frame, And One On L.H. Side Of Main Frame., Kit; "Model Designation" Centered On Right Side Of Truss Tube Between Front Standards, Kit; "Model Designation Kit" 75mm, Kit, Kit; "Model Designation" One On Each Side Of Main Frame, Kit; "Model Designation" Kit, Outside And Front Of Truss Tube, Kit; Model Number Repair, Kit; "Model Designation" (One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Kit; Model Number Repair, (Sub An232259), Kit; Kit, Model Number Repair, Kit; "55" - Located On R.H. Mast Plate, Kit; "Model Designation" Centered On Left Side Rear Of Main Frame Tube3
See all parts with full part numbers in Heavy Parts AI →
Furrow Filler Disk [B25]
John Deere : 370 - Disk : Furrow Filler Disk [B25]
03***99Bolt; 5/8" X 1-3/4", 4010 And 4020 Tractor, Bolt, Bolt; 5/8" X 1-3/4", Bolt; (A) 5/8" X 1-3/4", Bolt; (B) 5/8" X 1-3/4", Bolt; (C) 5/8" X 1-3/4"3
03***85Bolt; 1" X 3-1/2"1
14***05Nut; 1" 1", Unc, Nut; 1", Nut1
See all parts with full part numbers in Heavy Parts AI →
Furrow Filler Scraper, Self-Adjusting ( -1978) [B23]
John Deere : 370 - Disk : Furrow Filler Scraper, Self-Adjusting ( -1978) [B23]
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)2
34***14Spring Pin; (A) (B) 1/4" X 1-1/4", Spring Pin; (B), Spring Pin; (C) 1/4"X1-1/4" (Sub For T28830), Spring Pin; (A: W/O Cab) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", R.H., Spring Pin; (B: Straddle Mount) 1/4" X 1-1/4", Spring Pin; (A) 1/4"X1-1/4", Spring Pin; 1/4" X 1-1/4", Type E, Spring Pin; (A) 1/4" X 1-1/4", Spring Pin; (C) 1/4" X 1-1/4", Spring Pin; (A) (B), Spring Pin; 1/4" X 1-1/4", Spring Pin; (F) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", (Sub For Mg87334), Spring Pin; 1/4" X 1-1/4" 1/4"X1 1/4", Spring Pin; (A) 1/4"X1 1/4", Spring Pin; 1/4" X 1-1/4" (Use With Aa49047), Spring Pin; 1/4 X 1-1/4, Spring Pin; (A) (D) 1/4" X 1-1/4", Spring Pin; (B) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", L.H., Spring Pin; (E) 1/4" X 1-1/4", Spring Pin; 1/4"X1-1/4" (Sub For 25h773), Spring Pin; 1/4"X1 1/4", Spring Pin, Spring Pin; (A: Without Cab) 1/4" X 1-1/4", Spring Pin; 6.350 X 31.750 mm, Spring Pin; 1/4"X1/4", Spring Pin; (D) 1/4" X 1-1/4", Spring Pin; 1/4"X1-1/4", Spring Pin; (B) 1/4"X1-1/4"1
A2***82Bracket; (A) (D), Bracket, Bracket; (C), Bracket; (B), Bracket; (E), Bracket; (D), Bracket; (A)1
See all parts with full part numbers in Heavy Parts AI →
Gang Bolts And Disks - Continued 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B03]
John Deere : 370 - Disk : Gang Bolts And Disks - Continued 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B03]
03***99Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)102
03***51Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1"34
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)136
See all parts with full part numbers in Heavy Parts AI →
Gang Bolts And Disks - Continued 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Size [B11]
John Deere : 370 - Disk : Gang Bolts And Disks - Continued 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Size [B11]
03***99Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)102
03***51Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1"34
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)136
See all parts with full part numbers in Heavy Parts AI →
Gang Bolts And Disks 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B01]
John Deere : 370 - Disk : Gang Bolts And Disks 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B01]
A2***41Bumper; (A) (B), Bumper; (C), Bumper; Front Wing, Rear Main, Bumper; Front Wing, Bumper; Rear Wing, Inner (32'-1"), Bumper; Rear Wing, Inner (32'1", 35'0", 37'10", 45'), Bumper, Bumper; (B), Bumper; (C) Right And Left Rear Gangs Only, Bumper; Jam Nut, Bumper; (D: Inner), Bumper; Rear Main(16'5" - 37'10", 45'), Bumper; Rear Main And All Wings, Bumper; (A) (B) (C), Bumper; (B) (C), Bumper; (A), Bumper; Rear, Bumper; Rear Main, Bumper; (A) (B) Right Rear, Bumper; Front Wing And All Rear (Except 32'-4" With Gang Coupling)14
A2***45Pressed Flanged Hous; (B: Self Leveling Cleaning Shoe), Pressed Flanged Hous; (C) Steel, Pressed Flanged Hous; (A) Steel, Pressed Flanged Hous; (E) Steel, Pressed Flanged Hous; Steel, Pressed Flanged Hous; (D) Steel, Pressed Flanged Hous; (B) Steel, Pressed Flanged Hous; (B) (C) Steel, Pressed Flanged Hous; (Sub For W25511)34
A3***78Washer; (Sub A36258) For Furrow Filler, Washer; (E) (Sub A36258), Washer; (D) (Sub A36258), Washer; (D) (Sub A36258) Right And Left Rear, Washer; (B) (C) (D) (Sub A36258) On Left And Right Rear Gangs, Washer; (Sub A36258) On Left And Right Rear, Washer; (D), Washer; (Sub A36258) For L.H. And R.H. Rear Ext., Washer; (Sub A36258) Right And Left Rear; For Furrow Filler, Washer; (B) (Sub A36258) Right And Left Rear2
See all parts with full part numbers in Heavy Parts AI →
Gang Bolts And Disks 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Size [B09]
John Deere : 370 - Disk : Gang Bolts And Disks 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Size [B09]
A2***41Bumper; (A) (B), Bumper; (C), Bumper; Front Wing, Rear Main, Bumper; Front Wing, Bumper; Rear Wing, Inner (32'-1"), Bumper; Rear Wing, Inner (32'1", 35'0", 37'10", 45'), Bumper, Bumper; (B), Bumper; (C) Right And Left Rear Gangs Only, Bumper; Jam Nut, Bumper; (D: Inner), Bumper; Rear Main(16'5" - 37'10", 45'), Bumper; Rear Main And All Wings, Bumper; (A) (B) (C), Bumper; (B) (C), Bumper; (A), Bumper; Rear, Bumper; Rear Main, Bumper; (A) (B) Right Rear, Bumper; Front Wing And All Rear (Except 32'-4" With Gang Coupling)10
A2***45Pressed Flanged Hous; (B: Self Leveling Cleaning Shoe), Pressed Flanged Hous; (C) Steel, Pressed Flanged Hous; (A) Steel, Pressed Flanged Hous; (E) Steel, Pressed Flanged Hous; Steel, Pressed Flanged Hous; (D) Steel, Pressed Flanged Hous; (B) Steel, Pressed Flanged Hous; (B) (C) Steel, Pressed Flanged Hous; (Sub For W25511)34
A3***78Washer; (Sub A36258) For Furrow Filler, Washer; (E) (Sub A36258), Washer; (D) (Sub A36258), Washer; (D) (Sub A36258) Right And Left Rear, Washer; (B) (C) (D) (Sub A36258) On Left And Right Rear Gangs, Washer; (Sub A36258) On Left And Right Rear, Washer; (D), Washer; (Sub A36258) For L.H. And R.H. Rear Ext., Washer; (Sub A36258) Right And Left Rear; For Furrow Filler, Washer; (B) (Sub A36258) Right And Left Rear2
See all parts with full part numbers in Heavy Parts AI →
Gang Bolts And Disks, With Dura-Flex Bearings - Continued 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B07]
John Deere : 370 - Disk : Gang Bolts And Disks, With Dura-Flex Bearings - Continued 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B07]
03***99Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)102
03***51Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1"34
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)136
See all parts with full part numbers in Heavy Parts AI →
Gang Bolts And Disks, With Dura-Flex Bearings - Continued 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [B15]
John Deere : 370 - Disk : Gang Bolts And Disks, With Dura-Flex Bearings - Continued 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [B15]
03***99Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)102
03***51Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1"34
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)136
See all parts with full part numbers in Heavy Parts AI →
Gang Bolts And Disks, With Dura-Flex Bearings 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B05]
John Deere : 370 - Disk : Gang Bolts And Disks, With Dura-Flex Bearings 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B05]
A2***41Bumper; (A) (B), Bumper; (C), Bumper; Front Wing, Rear Main, Bumper; Front Wing, Bumper; Rear Wing, Inner (32'-1"), Bumper; Rear Wing, Inner (32'1", 35'0", 37'10", 45'), Bumper, Bumper; (B), Bumper; (C) Right And Left Rear Gangs Only, Bumper; Jam Nut, Bumper; (D: Inner), Bumper; Rear Main(16'5" - 37'10", 45'), Bumper; Rear Main And All Wings, Bumper; (A) (B) (C), Bumper; (B) (C), Bumper; (A), Bumper; Rear, Bumper; Rear Main, Bumper; (A) (B) Right Rear, Bumper; Front Wing And All Rear (Except 32'-4" With Gang Coupling)14
A3***78Washer; (Sub A36258) For Furrow Filler, Washer; (E) (Sub A36258), Washer; (D) (Sub A36258), Washer; (D) (Sub A36258) Right And Left Rear, Washer; (B) (C) (D) (Sub A36258) On Left And Right Rear Gangs, Washer; (Sub A36258) On Left And Right Rear, Washer; (D), Washer; (Sub A36258) For L.H. And R.H. Rear Ext., Washer; (Sub A36258) Right And Left Rear; For Furrow Filler, Washer; (B) (Sub A36258) Right And Left Rear2
A3***78Disk; (A) 610 X 4.5 mm (24" X .177") 4 Edge, Disk; 609.600 X 4.500 mm (24" X 0.177"), No. 4 Edge, Disk; (A) 609.600 X 4.500 mm (24" X 0.177"), No. 4 Edge, Disk; (A), Support - Steering1
See all parts with full part numbers in Heavy Parts AI →
Gang Bolts And Disks, With Dura-Flex Bearings 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [B13]
John Deere : 370 - Disk : Gang Bolts And Disks, With Dura-Flex Bearings 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [B13]
A2***41Bumper; (A) (B), Bumper; (C), Bumper; Front Wing, Rear Main, Bumper; Front Wing, Bumper; Rear Wing, Inner (32'-1"), Bumper; Rear Wing, Inner (32'1", 35'0", 37'10", 45'), Bumper, Bumper; (B), Bumper; (C) Right And Left Rear Gangs Only, Bumper; Jam Nut, Bumper; (D: Inner), Bumper; Rear Main(16'5" - 37'10", 45'), Bumper; Rear Main And All Wings, Bumper; (A) (B) (C), Bumper; (B) (C), Bumper; (A), Bumper; Rear, Bumper; Rear Main, Bumper; (A) (B) Right Rear, Bumper; Front Wing And All Rear (Except 32'-4" With Gang Coupling)10
A3***78Washer; (Sub A36258) For Furrow Filler, Washer; (E) (Sub A36258), Washer; (D) (Sub A36258), Washer; (D) (Sub A36258) Right And Left Rear, Washer; (B) (C) (D) (Sub A36258) On Left And Right Rear Gangs, Washer; (Sub A36258) On Left And Right Rear, Washer; (D), Washer; (Sub A36258) For L.H. And R.H. Rear Ext., Washer; (Sub A36258) Right And Left Rear; For Furrow Filler, Washer; (B) (Sub A36258) Right And Left Rear2
A3***78Disk; (A) 610 X 4.5 mm (24" X .177") 4 Edge, Disk; 609.600 X 4.500 mm (24" X 0.177"), No. 4 Edge, Disk; (A) 609.600 X 4.500 mm (24" X 0.177"), No. 4 Edge, Disk; (A), Support - Steering1
See all parts with full part numbers in Heavy Parts AI →
Gang Frame And Standard 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [A21]
John Deere : 370 - Disk : Gang Frame And Standard 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [A21]
08***47Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2"68
14***58Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)68
A2***23Standard; (A) L.H. Rear (Illustrated), Standard; (B) L.H. Rear (Illustrated), Standard; (A) L.H. Rear, Standard; (B) (D) R.H. Front And L.H. Rear, Standard; (A) (B) L.H. Rear (Illustrated), Standard; (C) L.H. Front And R.H. Rear (Illustrated), Standard; (D) (E) (F) L.H. Rear, Standard; (A) (D) R.H. Front And L.H. Rear, Standard; (F) L.H. Rear (Illustrated), Standard; (B) (C) L.H. Rear, Standard; (E) L.H. Front And R.H. Rear (Illustrated), Standard; (C) (D) R.H. Front And L.H. Rear, Standard; (A) (D) L.H. (Illustrated), Standard; (E) (F) L.H. Rear, Standard; (C) (D) L.H. (Illustrated), Standard; (A) L.H. Front And R.H. Rear (Illustrated), Standard; (A) (B) L.H. Front And R.H. Rear (Illustrated), Standard; (B) (C) L.H. Rear (Illustrated), Standard; (B) (C) (D) L.H. Rear (Illustrated), Standard; (B) (C) L.H. Front And R.H. Rear (Illustrated), Standard; (B) (D) L.H. (Illustrated), Standard; (E) L.H. Rear (Illustrated), Standard; (B) L.H. Front And R.H. Rear (Illustrated), Standard; (C) L.H. Rear (Illustrated), Standard; (D) L.H. Front And R.H. Rear (Illustrated)17
See all parts with full part numbers in Heavy Parts AI →
Gang Frame And Standard 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [A22]
John Deere : 370 - Disk : Gang Frame And Standard 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [A22]
08***47Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2"68
14***58Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)68
A2***23Standard; (A) L.H. Rear (Illustrated), Standard; (B) L.H. Rear (Illustrated), Standard; (A) L.H. Rear, Standard; (B) (D) R.H. Front And L.H. Rear, Standard; (A) (B) L.H. Rear (Illustrated), Standard; (C) L.H. Front And R.H. Rear (Illustrated), Standard; (D) (E) (F) L.H. Rear, Standard; (A) (D) R.H. Front And L.H. Rear, Standard; (F) L.H. Rear (Illustrated), Standard; (B) (C) L.H. Rear, Standard; (E) L.H. Front And R.H. Rear (Illustrated), Standard; (C) (D) R.H. Front And L.H. Rear, Standard; (A) (D) L.H. (Illustrated), Standard; (E) (F) L.H. Rear, Standard; (C) (D) L.H. (Illustrated), Standard; (A) L.H. Front And R.H. Rear (Illustrated), Standard; (A) (B) L.H. Front And R.H. Rear (Illustrated), Standard; (B) (C) L.H. Rear (Illustrated), Standard; (B) (C) (D) L.H. Rear (Illustrated), Standard; (B) (C) L.H. Front And R.H. Rear (Illustrated), Standard; (B) (D) L.H. (Illustrated), Standard; (E) L.H. Rear (Illustrated), Standard; (B) L.H. Front And R.H. Rear (Illustrated), Standard; (C) L.H. Rear (Illustrated), Standard; (D) L.H. Front And R.H. Rear (Illustrated)17
See all parts with full part numbers in Heavy Parts AI →
Gang Nut Wrenches [A25]
John Deere : 370 - Disk : Gang Nut Wrenches [A25]
A2***19Wrench; (Sq.), Wrench, Wrench; 61.9 mm (2-7/16"), Wrench; Sq., Wrench; Sq. Gang Nut, Wrench; Sq., For Gang Bolt, Wrench; Gang Nut, Sq., Wrench; Square Gang Nut, Wrench; Gang Nut, Square, Wrench; Square1
A2***20Wrench; 1-1/4" Hex, Wrench; Hex. 32 mm (1-1/4"), Wrench; Hex. For 30 mm (1-1/4") Bolts, Gang Frame To Main Frame, Wrench; 32 mm (1-1/4") Hex., Wrench; 32mm (1-1/4"), Wrench; 30 mm (1-1/4"), Wrench; 30 mm (1-1/4") Gang Bolt, Wrench; Hex. 30 mm (1-1/4"), Wrench; 30 mm (1-1/4") Hex., Wrench; Hex., 30 mm (1-1/4"), Wrench; Hex., Wrench; Hex., For 30 mm (1-1/4") Gang Bolt, Wrench; Gang Nut, Hex. 32 mm (1-1/4"), Wrench, Wrench; Gang Nut, Hex, Wrench; 1-1/4"1
See all parts with full part numbers in Heavy Parts AI →
Hitch L.H. Side [A08]
John Deere : 370 - Disk : Hitch L.H. Side [A08]
08***54Bolt; 1" X 6-1/2", Bolt; (A) 1" X 6-1/2"1
11***49Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2"2
1***2Spring2
See all parts with full part numbers in Heavy Parts AI →
Hitch R.H. Side [A06]
John Deere : 370 - Disk : Hitch R.H. Side [A06]
03***75Bolt; 3/8" X 2"2
08***86Cap Screw; 5/8" X 6-3/4", (For 127 X 178 mm (5" X 7")Frame), Cap Screw; (30" Drive Wheel Spacers), Cap Screw; 5/8" X 6-3/4", Cap Screw; 5/8" X 6-3/4", (30" Offset Cross Auger), Cap Screw; 5/8" X 6-3/4", (For 5 X 7 Frame), Cap Screw; 5/8" X 6-3/4", (For 5" X 7" Frame), Cap Screw; 5/8" X 6-3/4", (For Rig Mounting) (For 5" X 7" Frame)3
08***54Bolt; 1" X 6-1/2", Bolt; (A) 1" X 6-1/2"1
See all parts with full part numbers in Heavy Parts AI →
Hydraulic Tube Clamps ( -1986) Upper Cross Link [C04]
John Deere : 370 - Disk : Hydraulic Tube Clamps ( -1986) Upper Cross Link [C04]
19***00Screw; 5/16" X 3/4" (B), Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785), Screw; 5/16" X 3/4", (2 Used, 347; 4 Used, 467), Screw; 5/16" X 3/4" (With Grain Tank Extensions), Screw; 5/16" X 3/4", (Hb-225), Screw; (B) 5/16"X3/4", Screw; 5/16" X 3/4" Sgb, Screw; 5/16" X 3/4", (Use Without Spacers), Screw; X 5/16" X 3/4" (Sub For 19h1813), Screw; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16" X 3/4", Screw; (A) (B) 5/16" X 3/4", Screw; 5/16" X 3/4" (Use With Adjustable Sieve), Screw; 5/16" X 3/4", (With Grain Tank Extensions), Screw; (B) 5/16" X 3/4", (Ut), Screw; 5/16" X 3/4" Use One Per H134773, Screw; X 5/16" X 3/4", Screw; (B: (Xxxxxx- ) 4050-00***46; 4250-01***93; 4450-02***59) 5/16" X 3/4", Screw; 5/16" X 3/4", (Back), Screw; 5/16" X 3/4", Use With Rotary Air Screen Only, Screw; 5/16" X 3/4" (Use Without Spacers), Screw; 5/16" X 3/4" (Use With H136957), Screw; (C: 55 Series Replacement Sgb) 5/16" X 3/4", Screw, Screw; 5/16" X 3/4", (Use With 12h303 And 14h785), Screw; (A) 5/16"X3/4", Screw; 5/16" X 3/4", (Use With R122725), Screw; 5/16" X 3/4", Insecticide Only, Screw; 5/16" X 3/4" (Use With 14h785), Screw; 5/16" X 3/4" (A) (Use With 14h785), Screw; 5/16" X 3/4" (218, 220, 222, 224, And 230), Screw; (Outlet), Screw; 5/16" X 3/4" (Sgb), Screw; (A) (C) (D) 5/16" X 3/4", Screw; (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (B) (Use With 14h785), Screw; 5/16" X 3/4", (Use With Rd. Hole Sieve), Screw; 5/16"-18 Unc X1/2", Screw; 5/16" X 3/4", (Use With Adjustable Sieve), Screw; 5/16" X 3/4", Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Long), Screw; 5/16" X 3/4" (213, 215, And 216), Screw; 5/16" X 3/4" (Rh), Screw; 5/16" X 3/4" Lh, Screw; 5/16" X 3/4" (2 Used, With Grain Tank Extension; 3 Used, Without Grain Tank Extension), Screw; 5/16" X 3/4" (Sub For 19h1936), Screw; 5/16" X 3/4", (Use With Round Hole Sieve), Screw; 5/16" X 3/4" (Used With Straw Chopper), Screw; 5/16" X 3/4" (Sub For 19h2021), Screw; 5/16" X 3/4" (Use With Rd. Hole Sieve), Screw; 5/16" X 3/4" (Use With N10213), Screw; 5/16" X 3/4" (Use With Round Hole Sieve), Screw; 7.925 X 19.050 mm, Screw; 5/16" X 3/4" (Use With 12h303 And 28h1511), Screw; 5/16" X 3/4", (Sub For Mg87872), Screw; 5/16" X 3/4", (Sub N10212, This Application), Screw; 5/16" X 3/4", Germany, Screw; 5/16" X 3/4" (Heat Shield To Vent Base), Screw; (A: ( -Xxxxxx) 4650-01***35) 5/16" X 3/4", Screw; 5/16"-18 Unc X3/4", Screw; 5/16" X 3/4", (Hinson Cab), Screw; 5/16" X 3/4" (Fixed Hole Sieve), Screw; 5/16" X 3/4", (Used With Round Hole Sieve), Screw; 5/16" X 3/4", (Corn Head), Screw; 5/16" X 3/4" (Use With Straw Chopper), Screw; (A: ( -Xxxxxx) 4050-00***45; 4250-01***92; 4450-02***58) 5/16" X 3/4", Screw; 5/16"X3/4", Screw; 5/16" X 3/4", Fastener (High-Drum), Cap Screw; 5/16" X 3/4", Screw; (Code 6204), Screw; (Use With R112197), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785) (Use With Round Hole Sieve), Screw; W/ Multi-Crop, Screw; (B: (Xxxxxx- ) 4650-01***36) 5/16" X 3/4", Screw; 5/16" X 3/4", (Code 6204), Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Regular And Long Fixed Drive), Screw; 5/16" X 3/4", (R.H. Side), Screw; (A) 5/16" X 3/4", Screw; X 5/16" X 3/4", Screw; (A: Sound-Gard Body) 5/16" X 3/4", Screw; 5/16" X 3/4", Use With Endwise Transport, Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4", (10 Used, Regular; 14 Used, Long), Screw; (B) 5/16" X 3/4", Screw; 5/16" X 3/4", (Sub For H1085r), Screw; 5/16" X 3/4", (Corn Head And Three-Row Narrow Row-Crop Units), Screw; 5/16" X 3/4" (Use With 12h303), Screw; (Sub For F1002012), Screw; 5/16"X3/4, Screw; 5/16" X 3/4", Use With Amt, Screw; 5/16" X 3/4" (Use With R122725), Screw; 5/16"X1", Screw; 5/16" X 3/4" L.H., Screw; 5/16" X 3/4" (Straw Chopper), Screw; 5/16" X 3/4" (Sub For Am121752), Screw; 5/16" X 3/4", (10 Used, Regular; 12 Used, Long), Screw; 5/16" X 3/4", (3 Used, 347; 4 Used, 467), Screw; (A) (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (C), Screw; 5/16" X 3/4" (Serviced In Ah93991), Screw; 5/16" X 3/4" (A), Screw; 5/16"-18 Nc X 3/4", Screw; 5/16" X 3/4", Less Spout-Trak, Screw; 5/16", Screw; 5/16" X 3/4" (To Transmission Input Housing), Screw; X X X 5/16" X 3/4", Screw; 5/16" X 3/4", For Endwise Transport, Screw; 5/16" X 3/4", (Cornhead Attachment), Screw; 5/16" X 3/4" Rh, Screw; 5/16" X 3/4" (Rh Side), Screw; 5/16" X 3/4", (Hinson), Screw; 5/16" X 3/4", (Used With Rd. Hole Sieve), Screw; 5/16" X 3/4", (Regular), Screw; 5/16" X 3/4" (Outlet), Screw; 5/16" X 3/4", (Insecticide Only), Screw; (B) 5/16" X 3/4", Control Support Side, Screw; 5/16" X 3/4", (Less Air Conditioner), Screw; (A: W/Cab) 5/16" X 3/4", Screw; 5/16" X 3/4", (12 Used, Regular; 16 Used, Long)1
A3***02Stud1
A3***03Socket, Gasket; - Outlet, Serial Range: Elbow-Head, Gasket; - Elbow, Gasket; Water Outlet Elbow, Gasket; - Water Outlet Elbow, Gasket; Water, Outlet, Elbow, Gasket; Elbow, Gasket; Gasket -, Serial Range: Elbow-Head, Gasket; Elbow To Cylinder Head1
See all parts with full part numbers in Heavy Parts AI →
Hydraulic Tube Clamps L.H. Side Frame [C01]
John Deere : 370 - Disk : Hydraulic Tube Clamps L.H. Side Frame [C01]
19***00Screw; 5/16" X 3/4" (B), Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785), Screw; 5/16" X 3/4", (2 Used, 347; 4 Used, 467), Screw; 5/16" X 3/4" (With Grain Tank Extensions), Screw; 5/16" X 3/4", (Hb-225), Screw; (B) 5/16"X3/4", Screw; 5/16" X 3/4" Sgb, Screw; 5/16" X 3/4", (Use Without Spacers), Screw; X 5/16" X 3/4" (Sub For 19h1813), Screw; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16" X 3/4", Screw; (A) (B) 5/16" X 3/4", Screw; 5/16" X 3/4" (Use With Adjustable Sieve), Screw; 5/16" X 3/4", (With Grain Tank Extensions), Screw; (B) 5/16" X 3/4", (Ut), Screw; 5/16" X 3/4" Use One Per H134773, Screw; X 5/16" X 3/4", Screw; (B: (Xxxxxx- ) 4050-00***46; 4250-01***93; 4450-02***59) 5/16" X 3/4", Screw; 5/16" X 3/4", (Back), Screw; 5/16" X 3/4", Use With Rotary Air Screen Only, Screw; 5/16" X 3/4" (Use Without Spacers), Screw; 5/16" X 3/4" (Use With H136957), Screw; (C: 55 Series Replacement Sgb) 5/16" X 3/4", Screw, Screw; 5/16" X 3/4", (Use With 12h303 And 14h785), Screw; (A) 5/16"X3/4", Screw; 5/16" X 3/4", (Use With R122725), Screw; 5/16" X 3/4", Insecticide Only, Screw; 5/16" X 3/4" (Use With 14h785), Screw; 5/16" X 3/4" (A) (Use With 14h785), Screw; 5/16" X 3/4" (218, 220, 222, 224, And 230), Screw; (Outlet), Screw; 5/16" X 3/4" (Sgb), Screw; (A) (C) (D) 5/16" X 3/4", Screw; (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (B) (Use With 14h785), Screw; 5/16" X 3/4", (Use With Rd. Hole Sieve), Screw; 5/16"-18 Unc X1/2", Screw; 5/16" X 3/4", (Use With Adjustable Sieve), Screw; 5/16" X 3/4", Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Long), Screw; 5/16" X 3/4" (213, 215, And 216), Screw; 5/16" X 3/4" (Rh), Screw; 5/16" X 3/4" Lh, Screw; 5/16" X 3/4" (2 Used, With Grain Tank Extension; 3 Used, Without Grain Tank Extension), Screw; 5/16" X 3/4" (Sub For 19h1936), Screw; 5/16" X 3/4", (Use With Round Hole Sieve), Screw; 5/16" X 3/4" (Used With Straw Chopper), Screw; 5/16" X 3/4" (Sub For 19h2021), Screw; 5/16" X 3/4" (Use With Rd. Hole Sieve), Screw; 5/16" X 3/4" (Use With N10213), Screw; 5/16" X 3/4" (Use With Round Hole Sieve), Screw; 7.925 X 19.050 mm, Screw; 5/16" X 3/4" (Use With 12h303 And 28h1511), Screw; 5/16" X 3/4", (Sub For Mg87872), Screw; 5/16" X 3/4", (Sub N10212, This Application), Screw; 5/16" X 3/4", Germany, Screw; 5/16" X 3/4" (Heat Shield To Vent Base), Screw; (A: ( -Xxxxxx) 4650-01***35) 5/16" X 3/4", Screw; 5/16"-18 Unc X3/4", Screw; 5/16" X 3/4", (Hinson Cab), Screw; 5/16" X 3/4" (Fixed Hole Sieve), Screw; 5/16" X 3/4", (Used With Round Hole Sieve), Screw; 5/16" X 3/4", (Corn Head), Screw; 5/16" X 3/4" (Use With Straw Chopper), Screw; (A: ( -Xxxxxx) 4050-00***45; 4250-01***92; 4450-02***58) 5/16" X 3/4", Screw; 5/16"X3/4", Screw; 5/16" X 3/4", Fastener (High-Drum), Cap Screw; 5/16" X 3/4", Screw; (Code 6204), Screw; (Use With R112197), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785) (Use With Round Hole Sieve), Screw; W/ Multi-Crop, Screw; (B: (Xxxxxx- ) 4650-01***36) 5/16" X 3/4", Screw; 5/16" X 3/4", (Code 6204), Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Regular And Long Fixed Drive), Screw; 5/16" X 3/4", (R.H. Side), Screw; (A) 5/16" X 3/4", Screw; X 5/16" X 3/4", Screw; (A: Sound-Gard Body) 5/16" X 3/4", Screw; 5/16" X 3/4", Use With Endwise Transport, Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4", (10 Used, Regular; 14 Used, Long), Screw; (B) 5/16" X 3/4", Screw; 5/16" X 3/4", (Sub For H1085r), Screw; 5/16" X 3/4", (Corn Head And Three-Row Narrow Row-Crop Units), Screw; 5/16" X 3/4" (Use With 12h303), Screw; (Sub For F1002012), Screw; 5/16"X3/4, Screw; 5/16" X 3/4", Use With Amt, Screw; 5/16" X 3/4" (Use With R122725), Screw; 5/16"X1", Screw; 5/16" X 3/4" L.H., Screw; 5/16" X 3/4" (Straw Chopper), Screw; 5/16" X 3/4" (Sub For Am121752), Screw; 5/16" X 3/4", (10 Used, Regular; 12 Used, Long), Screw; 5/16" X 3/4", (3 Used, 347; 4 Used, 467), Screw; (A) (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (C), Screw; 5/16" X 3/4" (Serviced In Ah93991), Screw; 5/16" X 3/4" (A), Screw; 5/16"-18 Nc X 3/4", Screw; 5/16" X 3/4", Less Spout-Trak, Screw; 5/16", Screw; 5/16" X 3/4" (To Transmission Input Housing), Screw; X X X 5/16" X 3/4", Screw; 5/16" X 3/4", For Endwise Transport, Screw; 5/16" X 3/4", (Cornhead Attachment), Screw; 5/16" X 3/4" Rh, Screw; 5/16" X 3/4" (Rh Side), Screw; 5/16" X 3/4", (Hinson), Screw; 5/16" X 3/4", (Used With Rd. Hole Sieve), Screw; 5/16" X 3/4", (Regular), Screw; 5/16" X 3/4" (Outlet), Screw; 5/16" X 3/4", (Insecticide Only), Screw; (B) 5/16" X 3/4", Control Support Side, Screw; 5/16" X 3/4", (Less Air Conditioner), Screw; (A: W/Cab) 5/16" X 3/4", Screw; 5/16" X 3/4", (12 Used, Regular; 16 Used, Long)2
A3***02Stud2
A3***03Socket, Gasket; - Outlet, Serial Range: Elbow-Head, Gasket; - Elbow, Gasket; Water Outlet Elbow, Gasket; - Water Outlet Elbow, Gasket; Water, Outlet, Elbow, Gasket; Elbow, Gasket; Gasket -, Serial Range: Elbow-Head, Gasket; Elbow To Cylinder Head2
See all parts with full part numbers in Heavy Parts AI →
Jack [A10]
John Deere : 370 - Disk : Jack [A10]
AA***55Jack, Jack; (Illustrated) See Grid G131
AA***92Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00***26; 7700-00***20; 7800-01***50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap396501
AA***70Handle; (A: Knob Type), Handle; (A), Handle; For Jack With Green Knob, Handle, Handle; For Jack With Green Knob., Handle; Knob Type, Handle; Green, Handle; For Jack With Green Handle, Handle; (Sleeve Type), Handle; (Knob Type), Handle; (Sub For Aa27831), Grey Knob, Handle; (Sub Pt18656), Handle; (Knob Type) (Sub Pt18656)1
See all parts with full part numbers in Heavy Parts AI →
Leveling Rod And Pivot [A09]
John Deere : 370 - Disk : Leveling Rod And Pivot [A09]
11***48Cotter Pin; 1/4" X 1"2
14***58Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)2
14***73Nut; 31.750 mm (1-1/4") Jam, Nut; 1-1/4", Nut, Nut; 1-1/4" (A), Nut; 1-1/4", Jam, Nut; (A: 12'-6" To 27'-6") 1-1/4", Nut; 1-1/4" Jam, Nut; 1-1/4", Nut; (A) 1-1/4", Nut; 1-1/4" Model 12w And 16n1
See all parts with full part numbers in Heavy Parts AI →
Locators And Clamp 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [A23]
John Deere : 370 - Disk : Locators And Clamp 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [A23]
08***47Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2"8
14***58Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)8
28***58Bushing; 1.380" X 1.660" X 1-1/2", Bushing, Bushing; (A) 1-1/4" X 1-1/2"2
See all parts with full part numbers in Heavy Parts AI →
Locators And Clamp 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [A24]
John Deere : 370 - Disk : Locators And Clamp 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [A24]
08***47Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2"8
14***58Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)8
28***58Bushing; 1.380" X 1.660" X 1-1/2", Bushing, Bushing; (A) 1-1/4" X 1-1/2"2
See all parts with full part numbers in Heavy Parts AI →
Lower Cross Link [A18]
John Deere : 370 - Disk : Lower Cross Link [A18]
11***15Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038)1
14***15Nut; 1-1/8" Slotted, Nut; 1-1/8", Slotted, Nut; 1-1/8", Nut; 1-1/8", Slot1
19***12Cap Screw; 3/8" X 3-1/2" 3/8" X 3-1/2", Cap Screw; 3/8"X3-1/2", For 3179dl016, Cap Screw; 3/8" X 3-1/2", (Use With R100676 And R100682) (Code (2331), Cap Screw; 3/8" X 3-1/2" (Pst), Cap Screw; 3/8" X 3-1/2", Code 6201, Cap Screw; 3/8" X 3-1/2", (Na-D), Cap Screw; 3/8" X 3-1/2", (Sub For Mg88959), Cap Screw; 3/8" X 3-1/2", (2515,9701), Cap Screw; (A: Fan Guard) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2" (Sae 8), Cap Screw; 3/8" X 3-1/2", Upper, Cap Screw; 3/8" X 3-1/2", (Use With R100682) Code 2311(Af, Af001), Cap Screw; 3/8"X3-1/2", For 3179dl001, Cap Screw; 3/8" X 3-1/2", (Use With R81911), Cap Screw; 3/8" X 3-1/2", (Use With R98586) Code 2311(Tf), Cap Screw; 3/8" X 3-1/2", (Use With R100676), Cap Screw; 3/8" X 3-1/2", (6219), Cap Screw; 3/8" X 3-1/2", (Code 3904), Cap Screw; 3/8" X 3-1/2", Or Ord 19m7811 (M10 X 90), Cap Screw; 3/8" X 3-1/2", (4250,4450,4650,4850), Cap Screw; 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Use With T11234), Cap Screw; 3/8"X3-1/2", Cap Screw; 9.525 X 88.900 mm (3/8" X 3-1/2"), Cap Screw; 3/8" X 3-1/2" (Fan Guard), Cap Screw; 3/8" X 3-1/2", (Single Selective Control), Cap Screw; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 3-1/2", Cap Screw; (B: Power Shift Transmission) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2" Upper, Cap Screw; 3/8" X 3-1/2" (Diesel), Cap Screw; (A) (B), Cap Screw; (E) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Fan Guard), Cap Screw; 3/8" X 3-1/2", (6207,6209), Cap Screw; (Or Ord 19m7811 (M10 X 90)), Cap Screw; 3/8" X 3-1/2" (Fan Guard) (4250, 4450, 4650, 4850), Cap Screw; 3/8" X 3-1/2", Code 2314 (Af Only) (Fan To R100676), Cap Screw; (D: (Xxxxxx- ) 8560-00***01; 8760-00***01) 3/8" X 3-1/2", Cap Screw; (A: Use With Ar87205) 3/8" X 3-1/2", Cap Screw; (B) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Sae 8), Cap Screw; (D) 3/8" X 3-1/2", Cap Screw; (A) 3/8"X3-1/2", Cap Screw; (A) (B) 3/8" X 3-1/2", Cap Screw, Cap Screw; 3/8" X 3-1/2", (9118), Cap Screw; 3/8" X 3-1/2", (Single), Cap Screw; 3/8" X 3-1/2", (Use With R100676 And R100682), Cap Screw; 9.525 X 88.900 mm, Cap Screw; 3/8"X1-7/8", Cap Screw; 3/8" X 3-1/2", (6207), Cap Screw; 3/8" X 3-1/2", (Use With R100676) Code 2501 And 2503, Cap Screw; (A) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Code 3901)1
See all parts with full part numbers in Heavy Parts AI →
Main Frame And Gang Attachments L.H. Side [A14]
John Deere : 370 - Disk : Main Frame And Gang Attachments L.H. Side [A14]
08***73Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C)2
08***79Cap Screw; 1-1/4" X 18", Cap Screw; 1-1/4" X 18", For 17'10" Size Only8
08***83Cap Screw; 1" X 12-1/2"4
See all parts with full part numbers in Heavy Parts AI →
Main Frame And Gang Attachments R.H. Side [A12]
John Deere : 370 - Disk : Main Frame And Gang Attachments R.H. Side [A12]
03***65Bolt, Bolt; (C) (D) 3/8" X 3", Bolt; 3/8" X 3" (913-5 Used; 915-6 Used; 918-7 Used; 920, 922-8 Used; 925-10 Used; 930-11 Used), Bolt; 3/8" X 3", Bolt; (Use With 24h1219), Bolt; 3/8" X 3", (Use With 12h304 And 14h1076), Bolt; (A) (B) 3/8" X 3", Bolt; (B) 3/8" X 3", Bolt; 3/8" X 3" (213-5;215 & 216-6;218-7;220-8), Bolt; 3/8" X 3", Fertilizer Opener1
03***75Bolt; 3/8" X 2"1
08***73Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C)3
See all parts with full part numbers in Heavy Parts AI →
Reflector And Bracket [C08]
John Deere : 370 - Disk : Reflector And Bracket [C08]
14***78Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 102
14***93Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)1
21***17Screw; 0.190" X 5/8" (Use With T23460 And T23461 And Ar72960), Screw; 0.190" X 5/8" (Use With Ar72960, T23460 And T23461), Screw; 0.190" X 5/8", Use Wiih Red Reflector, Screw; Red Only, Screw; 0.190" X 5/8", (Diesel, Less Cab), Screw; 4.826 X 15.875 mm (0.190" X 5/8"), Screw; 4.826 X 15.875 mm (0.190" X 5/8"), Screw; (B), Screw; 0.190" X 5/8", (Use With T23460, T23461 And T23463), Screw; 0.190" X 5/8", Screw; 0.190" X 5/8", ( Ffsb107918 No Longer Available), Screw; 0.190" X 5/8", Use With Red Reflectors Only, Screw; No. 10 X 5/8", Screw; 0.190" X 5/8", Mercury, Screw; 0.190" X 5/8", Screw; 0.190" X 5/8", (Sub For Ty4168), Screw; (A) 0.190" X 5/8", Screw; 0.190" X 5/8", Use With Red Reflector Only, Screw; 0.190" X 5/8", Red Only, Screw, Screw; No.10x5/8", Screw; No.10 X 5/8", Screw; 0.190" X 5/8" (Use With T23460 And T23461), Screw; 0.190" X 5/8" (Use With T23462 And T23463), Screw; 0.190" X 5/8", (Use With T23462 And T23463), Screw; 0.190" X 5/8", (Use With T23460 And T23461), Screw; (B) 0.190" X 5/8", Screw; 0.190" X 5/8" (Use With T23460, T23461 And T23463), Screw; 0.190" X 5/8", Use With Red Reflector, Screw; 0.190" X 5/8", Control, Screw; 0.190" X 5/8" (Use With T23460, T23461 And Ar72960), Screw; No 10 X 5/8"2
See all parts with full part numbers in Heavy Parts AI →
Self-Adjusting Scraper ( -1978) 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B17]
John Deere : 370 - Disk : Self-Adjusting Scraper ( -1978) 230 Mm (9") Spacing 10.95 M (36'0") And 12.30 M (40'4") Sizes [B17]
14***39Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)84
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)84
34***14Spring Pin; (A) (B) 1/4" X 1-1/4", Spring Pin; (B), Spring Pin; (C) 1/4"X1-1/4" (Sub For T28830), Spring Pin; (A: W/O Cab) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", R.H., Spring Pin; (B: Straddle Mount) 1/4" X 1-1/4", Spring Pin; (A) 1/4"X1-1/4", Spring Pin; 1/4" X 1-1/4", Type E, Spring Pin; (A) 1/4" X 1-1/4", Spring Pin; (C) 1/4" X 1-1/4", Spring Pin; (A) (B), Spring Pin; 1/4" X 1-1/4", Spring Pin; (F) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", (Sub For Mg87334), Spring Pin; 1/4" X 1-1/4" 1/4"X1 1/4", Spring Pin; (A) 1/4"X1 1/4", Spring Pin; 1/4" X 1-1/4" (Use With Aa49047), Spring Pin; 1/4 X 1-1/4, Spring Pin; (A) (D) 1/4" X 1-1/4", Spring Pin; (B) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", L.H., Spring Pin; (E) 1/4" X 1-1/4", Spring Pin; 1/4"X1-1/4" (Sub For 25h773), Spring Pin; 1/4"X1 1/4", Spring Pin, Spring Pin; (A: Without Cab) 1/4" X 1-1/4", Spring Pin; 6.350 X 31.750 mm, Spring Pin; 1/4"X1/4", Spring Pin; (D) 1/4" X 1-1/4", Spring Pin; 1/4"X1-1/4", Spring Pin; (B) 1/4"X1-1/4"220
See all parts with full part numbers in Heavy Parts AI →
Self-Adjusting Scraper ( -1978) 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [B18]
John Deere : 370 - Disk : Self-Adjusting Scraper ( -1978) 280 Mm (11") Spacing 10.75 M (35'4") And 12.35 M (40'6") Sizes [B18]
14***39Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)68
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)68
34***14Spring Pin; (A) (B) 1/4" X 1-1/4", Spring Pin; (B), Spring Pin; (C) 1/4"X1-1/4" (Sub For T28830), Spring Pin; (A: W/O Cab) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", R.H., Spring Pin; (B: Straddle Mount) 1/4" X 1-1/4", Spring Pin; (A) 1/4"X1-1/4", Spring Pin; 1/4" X 1-1/4", Type E, Spring Pin; (A) 1/4" X 1-1/4", Spring Pin; (C) 1/4" X 1-1/4", Spring Pin; (A) (B), Spring Pin; 1/4" X 1-1/4", Spring Pin; (F) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", (Sub For Mg87334), Spring Pin; 1/4" X 1-1/4" 1/4"X1 1/4", Spring Pin; (A) 1/4"X1 1/4", Spring Pin; 1/4" X 1-1/4" (Use With Aa49047), Spring Pin; 1/4 X 1-1/4, Spring Pin; (A) (D) 1/4" X 1-1/4", Spring Pin; (B) 1/4" X 1-1/4", Spring Pin; 1/4" X 1-1/4", L.H., Spring Pin; (E) 1/4" X 1-1/4", Spring Pin; 1/4"X1-1/4" (Sub For 25h773), Spring Pin; 1/4"X1 1/4", Spring Pin, Spring Pin; (A: Without Cab) 1/4" X 1-1/4", Spring Pin; 6.350 X 31.750 mm, Spring Pin; 1/4"X1/4", Spring Pin; (D) 1/4" X 1-1/4", Spring Pin; 1/4"X1-1/4", Spring Pin; (B) 1/4"X1-1/4"180
See all parts with full part numbers in Heavy Parts AI →
Smv Emblem And Bracket [C09]
John Deere : 370 - Disk : Smv Emblem And Bracket [C09]
14***78Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 102
21***17Screw; 0.190" X 5/8" (Use With T23460 And T23461 And Ar72960), Screw; 0.190" X 5/8" (Use With Ar72960, T23460 And T23461), Screw; 0.190" X 5/8", Use Wiih Red Reflector, Screw; Red Only, Screw; 0.190" X 5/8", (Diesel, Less Cab), Screw; 4.826 X 15.875 mm (0.190" X 5/8"), Screw; 4.826 X 15.875 mm (0.190" X 5/8"), Screw; (B), Screw; 0.190" X 5/8", (Use With T23460, T23461 And T23463), Screw; 0.190" X 5/8", Screw; 0.190" X 5/8", ( Ffsb107918 No Longer Available), Screw; 0.190" X 5/8", Use With Red Reflectors Only, Screw; No. 10 X 5/8", Screw; 0.190" X 5/8", Mercury, Screw; 0.190" X 5/8", Screw; 0.190" X 5/8", (Sub For Ty4168), Screw; (A) 0.190" X 5/8", Screw; 0.190" X 5/8", Use With Red Reflector Only, Screw; 0.190" X 5/8", Red Only, Screw, Screw; No.10x5/8", Screw; No.10 X 5/8", Screw; 0.190" X 5/8" (Use With T23460 And T23461), Screw; 0.190" X 5/8" (Use With T23462 And T23463), Screw; 0.190" X 5/8", (Use With T23462 And T23463), Screw; 0.190" X 5/8", (Use With T23460 And T23461), Screw; (B) 0.190" X 5/8", Screw; 0.190" X 5/8" (Use With T23460, T23461 And T23463), Screw; 0.190" X 5/8", Use With Red Reflector, Screw; 0.190" X 5/8", Control, Screw; 0.190" X 5/8" (Use With T23460, T23461 And Ar72960), Screw; No 10 X 5/8"2
A1***62Bracket; (B), Bracket; Wide Frame, Sleeve; - Spool, Forward & Reverse, A16664 Selector Valve Assembly Used Transmission Serial No., Serial Range: 18213-23079, Bracket1
See all parts with full part numbers in Heavy Parts AI →
Spindle, Hub, And Wheel [A20]
John Deere : 370 - Disk : Spindle, Hub, And Wheel [A20]
19***28Cap Screw; (A: ( -Xxxxxx) Serial No. 4050-00***31; 4250-00***42; 4450-02***66) 3/8" X 3", Cap Screw; 3/8" X 3", (Also Order R49816, R49819, 34h251, 34h252, 34h297 And 34h299 Unless Previously Installed), Cap Screw; (A) 3/8" X 3", Cap Screw; (B) 3/8" X 3", Cap Screw; 3/8" X 3", (Use With T11234), Cap Screw; 3/8" X 3", (14 X 7 Disk And Hoe), Cap Screw; 3/8" X 3", Codes 2101 And 2103, Cap Screw; 3/8"X3", Cap Screw; 3/8" X 3", (Delco-Remy), Cap Screw; Code 2107 And 2108, Cap Screw; 3/8" X 3", (Sub 19h2458), Cap Screw; 3/8" X 3", (Delco Remy), Cap Screw; 3/8" X 3" (For R66794), Cap Screw; 3/8" X 3", (Dh-03, Gh-01), Cap Screw, Cap Screw; 3/8" X 3", (Use With A24646 Or A24647 And A24651) (Shear), Cap Screw; 3/8" X 3", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8" X 3", (Use With Aa20993 And Aa20994) (Cessna Cylinders Only), Cap Screw; 9.525 X 76.200 mm, Cap Screw; 3/8" X 3" (11'5" - 15'0"), Cap Screw; 3/8" X 3" (Sub 19h2228), Cap Screw; 3/8" X 3" (Spike-Tooth Cylinder), Cap Screw; 3/8" X 3", (4 Used, Variable Drive; 6 Used, Long), Cap Screw; (A: ( -Xxxxxx) 4050-00***43 (Qrt)) 3/8" X 3", Cap Screw; 3/8" X 3", (Spike-Tooth Cylinder), Cap Screw; 3/8" X 3", 1350, Cap Screw; 3/8" X 3" (Use With 14h812), Cap Screw; 9.525 X 76.200 mm (3/8" X 3") (Used With Code 1316), Cap Screw; Code 2802 And 6499, Cap Screw; 3/8" X 3" 3/8" X 3", Cap Screw; 3/8" X 3", Code 2101 And 2103, Cap Screw; (A) 3/8"X3", Cap Screw; 3/8" X 3", Shear Bolt, Cap Screw; 3/8" X 3" (Hs, Sae 8), Cap Screw; 3/8" X 3", Upper, Cap Screw; 3/8" X 3" (For R60827), Cap Screw; 3/8" X 3" (Use With Delco-Remy), Cap Screw; 3/8"X3" (For R66794), Cap Screw; 3/8" X 3", 2350, Cap Screw; 3/8" X 3", Cap Screw; 3/8" X 3", (Use With Aa20993 And Aa20994) For Cessna Cylinders Only, Cap Screw; (C) 3/8" X 3", Cap Screw; 3/8" X 3" (Qrt) (Nlr), Cap Screw; 3/8" X 3", For 509b And 510b, Cap Screw; (A: Quad-Range Transmission) 3/8" X 3", Cap Screw; 3/8" X 3", (Use With R78123), Cap Screw; 3/8"X2-1/8", Cap Screw; (B: Quad-Range Transmission) (E: ( -Xxxxxx) 4050-00***43 (Qrt)) 3/8" X 3", Cap Screw; 3/8" X 3", (8 Used For 714, 714a; 10 Used For 716, 716a), Cap Screw; 3/8" X 3" (Use With R78123), Cap Screw; 3/8"X3" (For R60827)1
24***56Washer; 1-1/32" X 2" X 0.194", (Sub 24h1138), Washer; 1-1/32" X 2" X 0.194", Washer; 1-1/32" X 2" X 0.194", (Sub For Na1628)1
28***13Spacer; 1-1/2" X 1.900" X 2", Spacer, Spacer; 1-1/2" X 2"1
See all parts with full part numbers in Heavy Parts AI →
Truss Bar [A16]
John Deere : 370 - Disk : Truss Bar [A16]
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)2
14***58Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)2
19***84Cap Screw; 3/4" X 4-1/2" (A), Cap Screw; 3/4" X 4-1/2", (Or, Rs, Ut), Cap Screw; 3/4" X 4-1/2", Cap Screw; (A: Included In Ar90577) 3/4" X 4-1/2", Cap Screw; (A), Cap Screw; 3/4" X 4-1/2", (Also Order 14h794), Cap Screw; 3/4" X 4-1/2", For Rear Bracket Only, Cap Screw; (C) 3/4" X 4-1/2", Cap Screw; 3/4" X 4-1/2" (Sub For Mg88007), Cap Screw; (A) 3/4" X 4-1/2", Cap Screw; 3/4" X 4-1/2" (Use With Ar90577), Cap Screw; 3/4" X 4-1/2" (Use W/ Ar90577), Cap Screw; 3/4" X 4-1/2", For Tractors Equipped With 800 Series 3-Point Hitch, Cap Screw; 3/4" X 4-1/2" (Sub For (4) Mg88007), Cap Screw; 3/4" X 4-1/2" (Use With 12h236), Cap Screw; (A: Category Iv) 3/4" X 4-1/2"2
See all parts with full part numbers in Heavy Parts AI →
Upper Cross Link [A17]
John Deere : 370 - Disk : Upper Cross Link [A17]
19***12Cap Screw; 3/8" X 3-1/2" 3/8" X 3-1/2", Cap Screw; 3/8"X3-1/2", For 3179dl016, Cap Screw; 3/8" X 3-1/2", (Use With R100676 And R100682) (Code (2331), Cap Screw; 3/8" X 3-1/2" (Pst), Cap Screw; 3/8" X 3-1/2", Code 6201, Cap Screw; 3/8" X 3-1/2", (Na-D), Cap Screw; 3/8" X 3-1/2", (Sub For Mg88959), Cap Screw; 3/8" X 3-1/2", (2515,9701), Cap Screw; (A: Fan Guard) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2" (Sae 8), Cap Screw; 3/8" X 3-1/2", Upper, Cap Screw; 3/8" X 3-1/2", (Use With R100682) Code 2311(Af, Af001), Cap Screw; 3/8"X3-1/2", For 3179dl001, Cap Screw; 3/8" X 3-1/2", (Use With R81911), Cap Screw; 3/8" X 3-1/2", (Use With R98586) Code 2311(Tf), Cap Screw; 3/8" X 3-1/2", (Use With R100676), Cap Screw; 3/8" X 3-1/2", (6219), Cap Screw; 3/8" X 3-1/2", (Code 3904), Cap Screw; 3/8" X 3-1/2", Or Ord 19m7811 (M10 X 90), Cap Screw; 3/8" X 3-1/2", (4250,4450,4650,4850), Cap Screw; 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Use With T11234), Cap Screw; 3/8"X3-1/2", Cap Screw; 9.525 X 88.900 mm (3/8" X 3-1/2"), Cap Screw; 3/8" X 3-1/2" (Fan Guard), Cap Screw; 3/8" X 3-1/2", (Single Selective Control), Cap Screw; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 3-1/2", Cap Screw; (B: Power Shift Transmission) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2" Upper, Cap Screw; 3/8" X 3-1/2" (Diesel), Cap Screw; (A) (B), Cap Screw; (E) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Fan Guard), Cap Screw; 3/8" X 3-1/2", (6207,6209), Cap Screw; (Or Ord 19m7811 (M10 X 90)), Cap Screw; 3/8" X 3-1/2" (Fan Guard) (4250, 4450, 4650, 4850), Cap Screw; 3/8" X 3-1/2", Code 2314 (Af Only) (Fan To R100676), Cap Screw; (D: (Xxxxxx- ) 8560-00***01; 8760-00***01) 3/8" X 3-1/2", Cap Screw; (A: Use With Ar87205) 3/8" X 3-1/2", Cap Screw; (B) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Sae 8), Cap Screw; (D) 3/8" X 3-1/2", Cap Screw; (A) 3/8"X3-1/2", Cap Screw; (A) (B) 3/8" X 3-1/2", Cap Screw, Cap Screw; 3/8" X 3-1/2", (9118), Cap Screw; 3/8" X 3-1/2", (Single), Cap Screw; 3/8" X 3-1/2", (Use With R100676 And R100682), Cap Screw; 9.525 X 88.900 mm, Cap Screw; 3/8"X1-7/8", Cap Screw; 3/8" X 3-1/2", (6207), Cap Screw; 3/8" X 3-1/2", (Use With R100676) Code 2501 And 2503, Cap Screw; (A) 3/8" X 3-1/2", Cap Screw; 3/8" X 3-1/2", (Code 3901)1
34***34Spring Pin; 5/16" X 2" 36 Ft And 42 Ft, Spring Pin; (A: 40 X 112, 34', 41' 10" And 41' 12.5") 5/16" X 2", Spring Pin; 5/16" X 2", (Use With N231208), Spring Pin; 5/16" X 2", Spring, Spring Pin; (A: 40 X 112, 34 And 41 Ft) 5/16" X 2", Spring Pin; 5/16" X 2" 30 Ft, Spring Pin; 5/16" X 2" (A), Spring Pin, Spring Pin; 5/16" X 2", 30', (Use With N231208), Spring Pin; 5/16" X 2", (1000 Rpm), Spring Pin; 5/16" X 2" 30 Ft; 5/16" X 2", Spring Pin; 5/16" X 2" 36 Ft And 42 Ft; 5/16" X 2", Spring Pin; 5/16" X 2" 5/16 X 2, Spring Pin; (A: 40 Ft Drill) (B: 42 Ft Drill) 5/16" X 2", Spring Pin; 5/16" X 2", Spring Pin; 5/16" X 2", Type C (Semi-Integral), Spring Pin; 3/16" X 2", Spring Pin; 5/16" X 2", 36' And 42', (Use With N231208)1
34***59Spring Pin; 3/8" X 3"1
See all parts with full part numbers in Heavy Parts AI →
Wear Guard [A11]
John Deere : 370 - Disk : Wear Guard [A11]
03***22Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"1
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)1
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)1
See all parts with full part numbers in Heavy Parts AI →
Wheel Frame Hydraulic Cylinder 127 Mm X 304.8 Mm (5" Bore X 12" Stroke) [C06]
John Deere : 370 - Disk : Wheel Frame Hydraulic Cylinder 127 Mm X 304.8 Mm (5" Bore X 12" Stroke) [C06]
22***42Set Screw; 1/4" X 5/16", Set Screw; 1/4" X 5/16", (Use With A22156), Set Screw1
A3***73Piston1
A3***74Guide1
See all parts with full part numbers in Heavy Parts AI →
Wheel Frame Hydraulic Cylinder 88.9 Mm X 304.8 Mm (3-1/2" Bore X 12" Stroke) [C05]
John Deere : 370 - Disk : Wheel Frame Hydraulic Cylinder 88.9 Mm X 304.8 Mm (3-1/2" Bore X 12" Stroke) [C05]
22***42Set Screw; 1/4" X 5/16", Set Screw; 1/4" X 5/16", (Use With A22156), Set Screw1
A2***19Piston, Piston; (Sub Re19696)1
A2***45Guide1
See all parts with full part numbers in Heavy Parts AI →
Wheel Frame Hydraulic Cylinders, Safety Lock, Hoses, And Fittings [C02]
John Deere : 370 - Disk : Wheel Frame Hydraulic Cylinders, Safety Lock, Hoses, And Fittings [C02]
11***49Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2"16
14***10Nut; 7/8", Unf, Nut; 7/8", Jam, Nut; 7/8", Nut; 7/8" (Sub For F79117g5), Nut; 7/8", Nut; 7/8", Unf, Jam8
24***49Washer; (A) 30 mm (Sub For 24m3533), Washer; 1-9/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X 0.060", With Iron-Gard, Washer; 1-9/32" X 1-11/16" X 0.060", Washer; 19/32"X1-11/16"X.060", Washer; 1-9/32" X 1-11/16" X .060", Washer; 1-9/32" X 1-11/16" X 0.060" Without Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060" With Intelliguard, Washer; 1-9/32" X 1-11/16" X 0.060", (3 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", (2 Used Nominal, With Iron-Gard) (5 Used Nominal, Less Iron-Gard), Washer; (A: Option) 1-9/32" X 1-11/16" X 0.060", Washer; 1-9/32" X 1-11/16" X 0.060", (2 Nominal), Washer; 1-9/32" X 1-11/16" X 0.060", Without Iron-Gard, Washer16
See all parts with full part numbers in Heavy Parts AI →
Wheel Frame [A19]
John Deere : 370 - Disk : Wheel Frame [A19]
AA***77Axle; L.H.1
AA***78Axle; R.H. (Illustrated)1
See all parts with full part numbers in Heavy Parts AI →

Need a specific 370 - DISK part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the appSource or supply its parts

Post a parts request and compare supplier quotes.