John Deereconditioner, hay(no series)

John Deere 35 - CONDITIONER, HAY

OEM parts breakdown

Search live 35 - CONDITIONER, HAY parts Source or supply its parts

Post a parts request and compare supplier quotes.

The John Deere 35 is a hay conditioner model covered by Operator Manual OME70752.

All 35 - CONDITIONER, HAY assemblies by section

Every catalogued assembly group for the John Deere 35 - CONDITIONER, HAY. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Conditioner Drive Slow-Down Kit [A13]

John Deere : 35 - Conditioner, Hay : Conditioner Drive Slow-Down Kit [A13]

14***26	Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"	2
19***33	Screw; 3/8" X 1-1/2" (Hs Sae 8), Screw; 9.525 X 38.100 mm (3/8" X 1-1/2"), Screw; 3/8" X 1-1/2" Sae 8; Low, Screw; 3/8" X 1-1/2", (Use With Ah66262), Screw; 3/8" X 1-1/2" 3/8 Unc-2a X 1 1/2 A17d Zn, Screw; 3/8" X 1-1/2" 3/8" X 1 1/2", Cap Screw; 3/8" X 1-1/2", Screw; (C: Code 1709 With Air Cleaner Mounting Pad) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" (D), Screw; 3/8"X1-1/2" For, 3179dl013, Screw; (B) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (1 Used L.H.) (1 Used R.H.), Screw; 3/8" X 1-1/2" Torque To 45 Lb-Ft (61 N-M), Screw; (A: Included In Ae48634) 3/8" X 1-1/2" For Use W/L.H. Gage Wheel Only, Screw; 3/8" X 1-1/2", (Use With Re61619), Screw; 9.525 X 38.100 mm, (Sae 8), Screw; 3/8" X 1-1/2" Hs, Sae 8, 3/8" X 1-1/2", Screw, Screw; 3/8" X 1-1/2" (Use With Re500917), Screw; 3/8" X 1-1/2" (A), Screw; (A) (B) 3/8" X 1-1/2" For Long Tooth Pickup Order H78421 Screw., Screw; 3/8" X 1-1/2", (Sae 8), Screw; 3/8" X 1-1/2" Sae 8, Cap Screw; 9.525 X 38.100 mm, Cap Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2" (Hs, Sae 8) (Sub For 19h1116), Screw; 3/8" X 1-1/2" (Dh-01, Dh-02, Gh-01, Gh-02, Hc-D, Hf-G), Screw; 3/8" X 1-1/2", (Use With 15h624), Screw; 3/8" X 1-1/2", (Code 1703), Screw; 3/8" X 1-1/2" (Sae 8), Low, Screw; 3/8" X 1-1/2" (Sae 8), Screw; 3/8" X 1-1/2", Hs, Sae 8, 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (2034), Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2", (Use With E95899), Screw; 3/8"X1-1/2" For, 3179dl004, Screw; 3/8"X1-1/2", (For 3179dl001), Screw; (Sub For R40808 Or R112876, This Application), Screw; Hs, Sae 8, 3/8" X 1-1/2", Cap Screw, Screw; 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2" (Hs, Sae 8), Screw; (Sub For R40808 Or R112876), Screw; 3/8"X1-1/2" (Sub For 19h1765, 19h1800), Screw; 9.525 X 38.100 mm, Screw; 3/8" X 1-1/2", Up, Screw; 3/8" X 1-1/2", (Hd-G), Screw; 3/8"X1-1/2" (Sub For 19h1765), Screw; 3/8" X 1-1/2", (Sub For 19h3385, This Application), Screw; 3/8" X 1-1/2", (Na-D, Na-G, Dn-01, Gn-01), Screw; 3/8" X 1-1/2", (Short Tongue), Screw; 3/8" X 1-1/2", (Gas), Screw; 3/8" X 1-1/2" (913, 915, -64*49, 3 Used) (915, 64*50-, 918, 920, 922, 924, 925, 930, 5 Used), Screw; 3/8" X 1-1/2" 3/8 Unc-2ax1/2 A17d Zn, Screw; 3/8" X 1-1/2", Low, Screw; 3/8" X 1-1/2", (Long Tongue), Screw; 3/8" X 1-1/2" (6081hh010), Screw; 3/8" X 1-1/2", (Ha-G, Ha-D, Ha-L, Hb-G, Hb-D, Hb-L, Hc-G, Na-D, Na-G, Na-L), Screw; 3/8" X 1-1/2" (For Re500917), Screw; 3/8" X 1-1/2" (Short Tongue), Screw; (C: Code 1703 Air Intake Short) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", Full Thread, (Sub For 19h2471), Screw; 3/8" X 1-1/2", For Use W/L.H. Pickup Gage Whl Only, Screw; 3/8" X 1-1/2" (Rigid), Screw; 3/8" X 1-1/2" (Sae 8) , Low, Screw; 3/8" X 1-1/2" (Hs, Sae 8), Screw; 3/8" X 1-1/2", (Hs, Sae 8), Screw; (A) 3/8" X 1-1/2", Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", Screw; 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", (For 3179dl016), Screw; 3/8"X1-1/2", (Sub For 19h1765), Screw; (Sub For R112876 Or R40808, This Application), Screw; 3/8" X 1-1/2", (Sub For T31783, This Application), Screw; 3/8" X 1-1/2", (1708), Screw; 3/8" X 1-1/2" (Long Tongue), Screw; 3/8"X1-1/2", For 3179dl001, Screw; 3/8" X 1-1/2" (Hs=10.9), Sae 8, Screw; 3/8" X 1-1/2" Incld With Engine, Screw; 3/8" X 1-1/2", (1703), Screw; (C) 3/8" X 1-1/2", Screw; 3/8"X1-1/2", For 3179dl016	4
22***48	Set Screw; 1/2" X 1", Sq. Hd., Set Screw; 1/2" X 1", Set Screw; 1/2" X 1", (Use With Ca28an)	2
AE***80	Chain Sprocket, Chain Sprocket; Two 23-Tooth	1

See all parts with full part numbers in Heavy Parts AI →

Conditioner Drive Sprockets [A11]

John Deere : 35 - Conditioner, Hay : Conditioner Drive Sprockets [A11]

03***29	Bolt; 5/8" X 2-1/4" (Use With 12h294 And 14h1039), Bolt; (C: For 390 Mower) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4" (Sub For 03h1856), Bolt; 5/8"X2-1/4", Bolt; 5/8" X 2-1/4" (844,61*46-; 1243,62*77-)	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	3
14***26	Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"	2
19***99	Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2" (Sae 8) (Sub For 19h1847), Cap Screw; (A) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (Less Cab), Cap Screw; 5/8" X 2-1/2", (Sae 8), Cap Screw; 5/8" X 2-1/2", (Code 1404), Cap Screw; 5/8" X 2-1/2", (Code 1403), Cap Screw; 5/8" X 2-1/2" Sae 8, Cap Screw; 5/8" X 2-1/2", Upper Right, (Sub For 19h3244), Cap Screw; 5/8"X2-1/2"Unc, Cap Screw; (E: Code 1402 Flywheel Housing Sae No. 2) 5/8" X 2-1/2" Code 1403, Cap Screw, Cap Screw; Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (4 Used Without Step), Cap Screw; 5/8" X 2-1/2", (Sub 19h3244), Cap Screw; 5/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/2", (Sub For 19h1387) (1405), Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244), Cap Screw; 5/8" X 2-1/2" Rh., Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244, This Application), Cap Screw; 5/8" X 2-1/2" (A), Cap Screw; 5/8" X 2-1/2", Code 1407, Cap Screw; 5/8" X 2-1/2", Code 1406, Cap Screw; 5/8" X 2-1/2" (Sae 8), Cap Screw; 5/8"X2-1/2", Cap Screw; 5/8" X 2-1/2", Upper Right, Cap Screw; 5/8" X 2-1/2" Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; (A) (B) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Low	2

See all parts with full part numbers in Heavy Parts AI →

Conditioner Frame [A05]

John Deere : 35 - Conditioner, Hay : Conditioner Frame [A05]

03***99	Bolt; 5/8" X 1-3/4", 4010 And 4020 Tractor, Bolt, Bolt; 5/8" X 1-3/4", Bolt; (A) 5/8" X 1-3/4", Bolt; (B) 5/8" X 1-3/4", Bolt; (C) 5/8" X 1-3/4"	2
03***80	Bolt; (D), Bolt; (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 1-1/4" (Sub For 03h1505), Bolt; (A) 3/8" X 1-1/4", Bolt; (E), Bolt; 3/8" X 1-1/4" L.H. Side (Use With 14h812), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/4" (With Skid Plates), Bolt; X 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", For 8n, Bolt; 3/8" X 1-1/4" (21 Used, 18'; 23 Used, 20'), Bolt; 3/8"X1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; (C) 3/8" X 1-1/4", Bolt; (A) (B) (C) (D) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; (A) (B) (C) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", Use With Furrower; For 8- And 12-Row, Bolt; 3/8" X 1-1/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 1-1/4", (4 Used On Diesel Tractor Only), Bolt; 3/8" X 1-1/4" (Sub For 10h1027), Bolt; 9.525 X 31.750 mm (3/8" X 1-1/4"), Bolt; 3/8" X 1-1/4", (A), Bolt	5
03***73	Bolt; 5/8" X 2-3/4", (Short Neck), Bolt; 5/8" X 2-3/4", Bolt; 5/8" X 2-3/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Bolt; 5/8"X2-3/4", Bolt; 5/8" X 2-3/4" (Sub For 03h1268)	4
11***85	Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480"	1

See all parts with full part numbers in Heavy Parts AI →

Conditioner Mountings And Supports (130 Draper Platform) [A07]

John Deere : 35 - Conditioner, Hay : Conditioner Mountings And Supports (130 Draper Platform) [A07]

03***52	Bolt, Bolt; 5/8"X1-1/2", Bolt; 5/8" X 1-1/2", Bolt; 5/8" X 1-1/2" Lh, Bolt; 5/8" X 1-1/2", (Long), Bolt; 5/8" X 1-1/2" (Use With 14h812)	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	17
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	2

See all parts with full part numbers in Heavy Parts AI →

Lower Roll [A10]

John Deere : 35 - Conditioner, Hay : Lower Roll [A10]

03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	8
19***39	Bolt; 3/8" X 1-1/4" (Use With Standard Rasp Bars), Bolt; 3/8" X 1-1/4", (Sub For 19h1732), Bolt; 3/8" X 1-1/4" 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 9.525 X 31.750 mm, Bolt; 3/8 X 1-1/4", Bolt; 3/8" X 1-1/4" Sae 8, Bolt; 3/8" X 1-1/4" (1a), Bolt; 3/8" X 1-1/4" 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (12 Teeth) (Use With At20830), Bolt; 3/8" X 1-1/4", (Use With Re25890 And R94218) (Rear), Bolt; 3/8" X 1-1/4", (Sae 8), Bolt; 3/8"X1-1/4" (For L32670), Bolt; 3/8" X 1-1/4", (1 Used L.H.) (1 Used R.H.), Bolt; 3/8" X 1-1/4" (Hs, Head Marked 10.9), Bolt; 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8"X1-1/4", For 3179dl013, Bolt; (A: For 9650 Cts Combine (69*10- )) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1-1/4", Bolt; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (8.8), Bolt; 3/8"X1-1/4", For 3179dl016, Bolt; 3/8" X 1-1/4" (Use With R86007), Bolt; 3/8"X1-1/4", For 3179dl004, Bolt; 3/8"X1-1/4" (Ord 19h1731), Bolt; 3/8"X1-1/4", For 3179dl001, Cap Screw; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304) (Key 2, Page 15-7), Bolt; 3/8" X 1-1/4" (24 And 224 Balers), Bolt; (A: Included In Ae48634) 3/8" X 1-1/4" Not Used W/L.H. Gage Wheel, Bolt; (B) 3/8"X1-1/4", Bolt, Bolt; 3/8" X 1-1/4", Hs, Sae 8,, Bolt; 3/8" X 1-1/4" Torque To 36 Lb-Ft (49 N-M), Bolt; 3/8" X 1-1/4" (Use With Re501693 Or Re502196), Bolt; (A) 3/8"X1-1/4", Bolt; 3/8" X 1-1/4" (Sub For R53661), Bolt; 3/8"X1-1/4" (Sub For 19h1732), Bolt; Hd, Sae 8, 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With Ar87583 Or Ar102218), Bolt; 3/8" X 1-1/4", (Ea-D, De-01), Bolt; 3/8" X 1-1/4" (Use With Re25890 And R94218) (Rear), Bolt; 3/8" X 1-1/4", Code 2111, Bolt; 3/8" X 1-1/4", (Code 4100 Or 4199), Bolt; 3/8" X 1-1/4", Full Thread, Bolt; 3/8" X 1-1/4", (9139), Bolt; 3/8" X 1-1/4", (Sub For M1112t, This Application), Bolt; (C) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4", Torque To 36 Lb-Ft (49 N-M), Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates), Bolt; 3/8" X 1-1/4" With Air Conditioning, Bolt; 3/8" X 1-1/4", (Sub For F2273r, This Application), Bolt; Hs, Sae 8, 3/8" X 1-1/4", Bolt; (A) (B) (D) (E) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", R.H., Bolt; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1-1/4" 3/8"X1-1/4" (Sae 8), Bolt; 3/8" X 1-1/4", (Pickup Reel), Bolt; 3/8" X 1-1/4" (Sub For 19h1732), Bolt; 3/8" X 1-1/4", (Na-D, Dn-01), Bolt; 3/8" X 1-1/4" (Rear), Bolt; 3/8" X 1-1/4" Hs, Sae 8, Bolt; 3/8" X 1-1/4" (B), Bolt; 3/8" X 1-1/4" 3/8"X1-1/4", Bolt; 3/8" X 1-1/4" Hs Sae 8, Bolt; 3/8" X 1-1/4" (Sae 8), Front, Bolt; (A), Bolt; (B) 3/8" X 1-1/4", Bolt; (B) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4", (2512,9139), Bolt; (A) (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", Torque To 46 Lb-Ft (63 N-M), Bolt; 3/8" X 1-1/4", (Use With T142647), Bolt; 3/8" X 1-1/4", L.H., Bolt; (A: Code 2803 Manifold Front Vertical) (B: Code 2805 Manifold Center With Extension) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With Re502196), Bolt; 3/8"X1-3/4", Bolt; 3/8" X 1-1/4", (Use With Standard Rasp Bars), Bolt; 3/8" X 1-1/4", (3014), Bolt; 3/8" X 1-1/4", (Code 2111), Cap Screw, Bolt; 3/8" X 1-1/4", (8.8), Bolt; 3/8" X 1-1/4", (Use With 12h304), Bolt; 3/8" X 1-1/4" (Water Pump Inlet To Cover), Bolt; (B) (C) 3/8" X 1-1/4" (Hs, Sae 8), Bolt; 3/8" X 1-1/4, Bolt; 3/8" X 1-1/4", (3006), Bolt; (A) 3/8"X1-1/4" (Marked L39906), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (10.9), Bolt; 3/8" X 1-1/4" (Sub For M1112t, This Application), Bolt; 3/8" X 1-1/4" Not Used With L.H. Gauge Wheel, Bolt; (Code 1304, 1320), Bolt; 3/8"X1-3/8", Bolt; (A: For 9650 Combine (6907- ) Also Serial Nos. 6994, 6995, 6901, 6902 And 69**05.) 3/8" X 1-1/4", Bolt; 3/8"X1-1/4", (For 3179dl016), Bolt; 3/8" X 1-1/4" (Sae 8), Bolt; 3/8" X 1-1/4" (Hs, Sae 8 ), Bolt; 3/8" X 1-1/4", (Code 1701, 1702 And 1703), Bolt; 3/8" X 1-1/4", (Bat Reel), Bolt; 3/8"X1-1/4", (For 3179dl001), Bolt; (B: W/O Cab) 3/8" X 1-1/4", Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", Hs, Sae 8, Bolt; 3/8" X 1-1/4", (Ha-D, Hb-D), Bolt; 3/8" X 1-1/4" (Hs, Sae 8) (Lower Holes), Bolt; (B) (C) 3/8" X 1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Hs, Sae 8) (Use With Re502196)	3
22***43	Set Screw; 3/8" X 7/16", (Sub For R56544), Set Screw; 3/8" X 7/16", (20'-9" Through 32'-1"), Set Screw; 3/8" X 7/16", Set Screw; (Sub For R56544), Set Screw; 3/8" X 7/16" (Sub For R56544)	1
24***02	Washer; 25/32" X 1-7/8" X .250", Washer; Front, 25/32"X1-7/8"X.250", Washer; Rear 25/32" X 1-7/8" X .250", Washer; 25/32" X 1-7/8" X 1/4", Washer; 25/32" X 1-7/8" X 0.250", Washer, Washer; Front, 25/32" X 1-7/8" X .250", Washer; 25/32" X 1-7/8" X 1/4" Not Used W/Tow Pkg., Washer; .250" X 25/32" X 1-7/8" (Sub For, Washer; 25/32" X 1-7/8" X 1/4", (Sub For Mg141781), Washer; .250" X 25/32" X 1-7/8" \|, Washer; .250" X 25/32" X 1-7/8" (Sub For C3964e), Washer; (Sub For C3964e)	1

See all parts with full part numbers in Heavy Parts AI →

Roll Tension Spring [A06]

John Deere : 35 - Conditioner, Hay : Roll Tension Spring [A06]

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	1
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	4
14***41	Nut; 5/8", Jam, L.H., Nut; 5/8", Jam, L.H. Thread, Nut; 5/8" Lh, Left-Hand Thread, Nut; 5/8" L.H. (L.H. Thread), Nut; 5/8" Jam, Left-Hand Thread, L.H., Nut; 5/8", L. H. Thread, Nut; 5/8", R.H. Thread, Nut; 5/8", Nut; 5/8", L.H. Thread, Nut; 5/8", L.H., Nut; Sp, 5/8", Nut; 5/8" L.H. Thread	1
19***35	Cap Screw; 1/2" X 2", Hs, Sae 8 (8 Used, Less Spout-Trak)(6 Used, With Spout-Trak), Cap Screw; 1/2" X 2", Hs, Sae 8,, Cap Screw; 1/2"X2" (Sub For Ce14125), Cap Screw; 1/2" X 2", Cap Screw; 1/2" X 2" (B), (30") (38"), Cap Screw; 1/2" X 2" Tapered, Cap Screw; (Sub For N104293), Cap Screw; 1/2" X 2", (Hs, Sae 8), Cap Screw; 1/2" X 2" For Tapered Only, Cap Screw; 12.700 X 50.800 mm (1/2" X 2") (Hs, Sae 8), Cap Screw; 1/2 X 2", Cap Screw; 1/2" X 2" With Air Conditioning (Pulley Safety Washer To Fan Spacer), Cap Screw; 1/2" X 2", (Use With R71696), Cap Screw; Hs, Sae 8, 1/2" X 2", Cap Screw; 1/2" X 2" (Hs, Sae 8), Cap Screw; 1/2" X 2", Hs, Sae 8, Cap Screw; 1/2"X2", Cap Screw; 1/2" X 2", (540 Rpm Only), Cap Screw; 1/2" X 2', Cap Screw; (B) 1/2" X 2", Cap Screw; 1/2" X 2", Hs Sae 8, Cap Screw; 1/2" X 2" (Hs, Sae 8) (Diesel), Cap Screw; (W/Al38671), Cap Screw; 12.700 X 50.800 mm, Cap Screw; 1/2" X 2" (8 Used, Less Spout-Trak)(6 Used, With Spout-Trak), Cap Screw, Cap Screw; 12.700 X 50.800 mm (1/2" X 2")	2

See all parts with full part numbers in Heavy Parts AI →

Upper Roll [A09]

John Deere : 35 - Conditioner, Hay : Upper Roll [A09]

03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	8
22***43	Set Screw; 3/8" X 7/16", (Sub For R56544), Set Screw; 3/8" X 7/16", (20'-9" Through 32'-1"), Set Screw; 3/8" X 7/16", Set Screw; (Sub For R56544), Set Screw; 3/8" X 7/16" (Sub For R56544)	1
24***02	Washer; 25/32" X 1-7/8" X .250", Washer; Front, 25/32"X1-7/8"X.250", Washer; Rear 25/32" X 1-7/8" X .250", Washer; 25/32" X 1-7/8" X 1/4", Washer; 25/32" X 1-7/8" X 0.250", Washer, Washer; Front, 25/32" X 1-7/8" X .250", Washer; 25/32" X 1-7/8" X 1/4" Not Used W/Tow Pkg., Washer; .250" X 25/32" X 1-7/8" (Sub For, Washer; 25/32" X 1-7/8" X 1/4", (Sub For Mg141781), Washer; .250" X 25/32" X 1-7/8" \|, Washer; .250" X 25/32" X 1-7/8" (Sub For C3964e), Washer; (Sub For C3964e)	1
2***4	Shaft Key, Shaft Key; 5/16" X 1-1/4", Shaft Key; 5/16" X 1-1/4" L.H.	2

See all parts with full part numbers in Heavy Parts AI →

Need a specific 35 - CONDITIONER, HAY part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.