John Deerebaler(no series)

John Deere 338 - BALER

Specifications · OEM parts breakdown

Search live 338 - BALER parts Source or supply its parts

Post a parts request and compare supplier quotes.

John Deere 338 - BALER specifications

Engine

PTO Speed

540 rpm

Dimensions

Auger Diameter	41 cm (16 in)
Auger Length	154.9 cm (61 in)

Service capacities (summary)

Twine Ball Capacity	8
Wire Coil Capacity	4

Source specifications

Machine Length	19 ft
Machine Width	9 ft
Bale Length	1 - 4.17
Plunger Speed	Normal speed (under load): 80 spm
Length of stroke	30 in
Machine Height	6 ft
Machine Weight	Option 1: {"min":"2,805","max":"2,972"}
Height x width	36 x 46 cm
Twine capacity	8
Wire ball capacity	4
Length w/ long tongue	576.5 cm
Width	274.3 cm
Height with fork cover	170.2 cm
Weight empty	1272 kg

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

338 - BALER common service parts

Part number	Part	Notes
AH19293	Filter	Scheduled service item	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

All 338 - BALER assemblies by section

Every catalogued assembly group for the John Deere 338 - BALER. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Auger Housing

John Deere : 338 - Baler : Auger Housing

03***68	Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)	0
03***15	Bolt; 5/16"X2" (Sub For 03h2209), Bolt; 5/16" X 2" (For Sound-Gard Body), Bolt; 5/16" X 2", (For Sound-Gard Cabs), Bolt, Bolt; 5/16" X 2", Bolt; 5/16" X 2", Rd. Hd., Bolt; (A: Coded Items Are Used With The 714 mm (28-1/8") Angle.) 5/16" X 2", Bolt; 5/16"X2" (Sub For 03h2209 Appl)	1
03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	0
03***72	Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 5/16" X 1/2", Bolt; (B) 5/16"X1/2", Bolt; 5/16" X 1/2", (3.7 M (12-Ft.), 9 Used Per Tooth Bar) (4.3 M (14-Ft.), 12 Used Per Tooth Bar) (4.8 M (16-Ft.), 12 Used Per Tooth Bar), Bolt; 5/16"X1/2", Bolt; 5/16" X 1/2", 9 Used, 3.7m (12 Ft); 12 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 5/16" X 1/2", Each Additional Tooth Bar, Bolt; 5/16" X 1/2", (Per Tooth Bar), Bolt; (Sub For Mg280616), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.), Bolt; 5/16" X 1/2" (215 And 216-1 Used; 218, 220, 222, And 224-2 Used; 230-4 Used), Bolt; 5/16" X 1/2" (Sub For 03h1607), Bolt; (C) 5/16" X 1/2", Bolt; (B) 5/16" X 1/2", Bolt; 5/16x1/2", Bolt, Bolt; (C) 5/16"X1/2", Bolt; 5/16" X 1/2" (915-1 Used; 918, 920, 922, 924 And 925- 2 Used; 930-4 Used), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7m (12-Ft.) (12 Used Per Tooth Bar, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; (A) 5/16" X 1/2", Bolt; X 5/16" X 1/2", Bolt; 5/16" X 1/2" (A), Bolt; 5/16" X 1/2", 9 Used Per Tooth Bar, 3.7 M (12-Ft.) 12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 5.0 M (16-Ft.)	0

See all parts with full part numbers in Heavy Parts AI →

Auger And Auger Frame

John Deere : 338 - Baler : Auger And Auger Frame

03***68	Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)	2
11***12	Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm	2
11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	3
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	1

See all parts with full part numbers in Heavy Parts AI →

Bale Case

John Deere : 338 - Baler : Bale Case

03***74	Bolt; 7/16" X 1-1/2", For Rr2 Or Rr4 Cultivator, Bolt; (E) 7/16" X 1-1/2", Bolt; (M) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", Bolt; (N) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", (Through Guard And Clip), Bolt, Bolt; 7/16" X 1-1/2" For Four Wheel Drive Tractors, Bolt; (A) 7/16" X 1-1/2", Bolt; 7/16"X1-1/2", Bolt; 7/16" X 1-1/2" (Use With E64519)	2
03***46	Bolt; (C) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4" L.H., Bolt; 1/2" X 1-1/4" (Flexible), Bolt; 1/2" X 1-1/4", (For 1985 Machines And Up), Bolt; 1/2" X 1-1/4" (A), Bolt; 1/2" X 1-1/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 1/2" X 1-1/4", Bolt; (Use With E64519), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4") (1253a), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4" Grass Seed Special, Bolt; 1/2" X 1-1/4", Bolt; 1/2"X31,7, Bolt, Bolt; 1/2" X 1-1/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, 224-16 Used), Bolt; 1/2" X 1-1/4", (United Kingdom Only), Bolt; 1/2"X1-1/2", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (327, 336, 337, 346 And 347 Balers), Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/4", Gr. 8	4
03***51	Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1"	4
11***21	Cotter Pin; 4 X 25 mm (A) (B), Cotter Pin; 4 X 25 mm, (Use With S1728m), Cotter Pin; 4 X 25 mm, Cotter Pin; (A: Also Use With Fi Kit Mn10741) 4 X 25 mm, Cotter Pin; (H) 4 X 25 mm, Cotter Pin; 4 X 25 mm, (Nla), Cotter Pin; 4 X 25 mm, (Next To Feed Cup), Cotter Pin; 5/32"X1", Cotter Pin; 5/32"X1" (Sub For 11h239), Cotter Pin; 4 X 25 mm (A), Cotter Pin; 4 X 25 mm (Feed Cup), Cotter Pin; 4x25mm (Sub For 11m1393), Cotter Pin; 4 X 25 mm 4x26 mm, Cotter Pin; 4 X 25 mm, (Sub For 11h230), Cotter Pin; 4 X 25 mm (B), Cotter Pin; (A: United Kingdom, France, Germany And Sweden) 4 X 25 mm, Cotter Pin; 4 X 25 mm (Next To Feed Cup), Cotter Pin; (A) 4x25mm (Sub For 11h239), Cotter Pin; (Sub F2600916), Cotter Pin; 4 X 25 mm, (Next To Feed Cups), Cotter Pin; 4 X 25 mm R.H., Cotter Pin; (C: Next To Feed Cup) 4 X 25 mm, Cotter Pin; (D) 4 X 25 mm, Cotter Pin; 4 X 25 mm (Sub For Ch17103), Cotter Pin; 4 X 25 mm 5/32"X1", Cotter Pin; 4 X 25 mm Sub For 11m7028, Cotter Pin; 4x25, Cotter Pin; (D: (Xxxxxx- ) 7600-00*27; 7700-0005; 7800-00**04) 4 X 25 mm, Cotter Pin; W/ Telescopic Draft Links, Cotter Pin; 4 X 25 mm, (Australia And New Zealand Only), Cotter Pin; 4 X 25mm, Cotter Pin; (C: United Kingdom, France, Germany And Sweden) 4 X 25 mm, Cotter Pin; 0.157" X 0.984", Cotter Pin; 4x25mm (Sub For 11h239), Cotter Pin; 4 X 25 mm, (Sub For 11h239), Cotter Pin; 4x28mm, Cotter Pin; (A) 0.157" X 0.984", Cotter Pin; 4 X 25 mm 4 X 25 mm, Cotter Pin; 4 X 25 mm, (Use With B2045m), Cotter Pin; (C) 4 X 25 mm, Cotter Pin; 4 X 25 mm M4x28 Zn, Cotter Pin, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 25 mm, Cotter Pin; (312) 4 X 25mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 25 mm, R.H., Cotter Pin; 4 X 25 mm M4 X 20	4

See all parts with full part numbers in Heavy Parts AI →

Bale Case Extension

John Deere : 338 - Baler : Bale Case Extension

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	1
03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	1
03***64	Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)	2
03***97	Bolt; M12 X 24, Bolt; M12 X 25, (Use With E74826), Bolt; M12 X 25, Bolt, Bolt; (A: For 1, 81 Meter Pickup) M12 X 25, Bolt; M12 X 25, Use On Right Side Only, Bolt; M12 X 25 (A), Bolt; M12 X 25 Use On Right Side Only, Bolt; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12 X 25, Bolt; M12 X 25 (Use With E74826), Bolt; (A) M12 X 25, Bolt; (A: For 1, 81 M Pickup And 2, 20 M Hiflow Pickup) (B: For Precutter) M12 X 25, Bolt; M12x25, Bolt; M12 X 25 (Use With E89820), Bolt; (B) M12 X 25 (914), Bolt; M12 X 25 Uses E63527 Nut, Bolt; (A: For 2, 20 Meter Pickup) M12 X 25, Bolt; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12 X 25, Bolt; (Sub For 03m7131), Bolt; M12 X 25 Rd. Hd., Bolt; (C) M12 X 25, Bolt; M12 X 25, (Use With E89820), Bolt; M12 X 25 (1092), Bolt; (C: For 2, 00 Meter Pickup Hiflow) M12 X 25, Bolt; (D) M12 X 25	2

See all parts with full part numbers in Heavy Parts AI →

Bale Chute Extension

John Deere : 338 - Baler : Bale Chute Extension

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	0
03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	2
03***64	Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)	2
24***11	Washer; 9/16" X 1-3/8" X 0.105" Incld In 8, Washer; 9/16" X 1-3/8" X 0.105" Incld In 24, Washer; 9/16" X 1-3/8" X 0.105" (Remove Head), Washer; 9/16" X 1-3/8" X 0.105", (Use With N161501), Washer; 17/32" X 3/4" X 0.060", Washer; 9/16" X 1-3/8" X 0.105" Sub For 24h1273, Washer; 9/16" X 1-3/8" X 0.105" 1/2", (Sub For Mg80700), Washer; 9/16" X 1-3/8" X 0.105" (Sub For Er137243 Appl), Washer; 9/16" X 1-3/8" X 0.105" Lh Front Platform, Washer; (D) 9/16" X 1-3/8" X 0.105", (Sub For M80700), Washer; 9/16" X 1-3/8" X 0.105", (Not Illustrated), Washer; (A), Washer; (A: 28" Spring Trip Standard) 9/16" X 1-3/8" X 0.105", Washer; 9/16" X 1-3/8" X 0.105" (Not Illustrated), Washer; 9/16" X 1-3/8" X 0.105" Incld In 12, Washer; 14.275 X 34.925 X 2.667 mm, Already On Machine, Washer, Washer; X 9/16" X 1-3/8" X .105", Washer; 9/16" X 1-3/8" X 0.105" Incld In 15, Washer; (A: Os Tires) 9/16" X 1-3/8" X 0.105", Washer; 9/16"X1-3/8"X.105", Washer; 9/16" X 1-3/8" X 0.105" (Diesel), Washer; 9/16" X 1-3/8" X 0.105" Already On Machine, Washer; 9/16" X 1-3/8" X 0.105", Washer; (A) 9/16" X 1-3/8" X 0.105", Washer; 14.275 X 34.925 X 2.667 mm, Washer; 9/16" X 1-3/8" X .105", Washer; (A: ( -Xxxxxx) Serial No. 8450-00*46; 8650-00*79) 9/16" X 1-3/8" X 0.105", Washer; 9/16" X 1-3/8" X 0.105", 1/2", Washer; (B) 9/16" X 1-3/8" X 0.105", Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 9/16" X 1-3/8" X 0.105", Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 9/16" X 1-3/8" X 0.105", Washer; 9/16" X 1-3/8" X 0.105", (5 Used L.H.) (5 Used R.H.), Washer; 9/16" X 1-3/8" X 0.105", (Use With N189637), Washer; 9/16"X1-3/4"X.105", Washer; (A: Include In Cb11415851 Retainer Kit) 9/16" X 1-3/8" X 0.105", Washer; 14.275 X 34.925 X 2.667 mm, Incld In A, Washer; 9/16" X 1-3/8" X 0.105" (213-7 Used; 215 And 216-9 Used; 218-11 Used; 220, 222, And 224-13 Used), Washer; (A: Oversize Tires) 9/16" X 1-3/8" X 0.105", Washer; (C) 9/16" X 1-3/8" X 0.105"	4

See all parts with full part numbers in Heavy Parts AI →

Bale Counter

John Deere : 338 - Baler : Bale Counter

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	1
11***12	Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm	1
12***33	Washer; (Sub For 43*40), Washer; (A: 5104(0001- ), 5204 ( -0026), 5038d(0001- ).) 1/8", Washer; No. 5, Washer; 1/8", Washer, Washer; No.5, Washer; (C: 5303 (Xxxxxx- 0000), 5403 (Xxxxxx- 0032), 5503 (Xxxxxx- Xxxxxx)) 1/8", Washer; 3.175 mm, Washer; (D: Also Includes Sn:) 1/8", Washer; (A: Except Sn - 5320n: 33**13) 1/8", Washer; 1/8" (Sub For 12m7048), Washer; (A: Collarshift Transmission) 1/8", Washer; 1/8" (Sub For A590903), Washer; 1/8" (Use With R56026)	4
14***02	Nut; No 5, Nut; 1/8", Nut; No.5	4

See all parts with full part numbers in Heavy Parts AI →

Compressors

John Deere : 338 - Baler : Compressors

03***97	Bolt; M12 X 24, Bolt; M12 X 25, (Use With E74826), Bolt; M12 X 25, Bolt, Bolt; (A: For 1, 81 Meter Pickup) M12 X 25, Bolt; M12 X 25, Use On Right Side Only, Bolt; M12 X 25 (A), Bolt; M12 X 25 Use On Right Side Only, Bolt; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12 X 25, Bolt; M12 X 25 (Use With E74826), Bolt; (A) M12 X 25, Bolt; (A: For 1, 81 M Pickup And 2, 20 M Hiflow Pickup) (B: For Precutter) M12 X 25, Bolt; M12x25, Bolt; M12 X 25 (Use With E89820), Bolt; (B) M12 X 25 (914), Bolt; M12 X 25 Uses E63527 Nut, Bolt; (A: For 2, 20 Meter Pickup) M12 X 25, Bolt; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12 X 25, Bolt; (Sub For 03m7131), Bolt; M12 X 25 Rd. Hd., Bolt; (C) M12 X 25, Bolt; M12 X 25, (Use With E89820), Bolt; M12 X 25 (1092), Bolt; (C: For 2, 00 Meter Pickup Hiflow) M12 X 25, Bolt; (D) M12 X 25	4
03***00	Bolt; (A: With Free Roll No.11) M12 X 40, Bolt; M12x40, Bolt; (C: Regular) M12 X 40, Bolt; M12 X 40 L.H., Bolt; M12 X 40, Bolt; (A) (B) (C), Bolt; M12 X 40 (Used With Rear Chain Shields), Bolt; M12 X 40 Rh, Bolt; (A: For Rotor-Type Pickup) M12 X 40, Bolt; M12 X 40, (Used With Rear Chain Shields)	1
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	1
14***75	Nut; M12 Mst, Nut; M12, For Plastic Trash Board, Nut; (A: For Msl) (B: For Nsl) M12 (For Dc203954), Nut; (E: 26"X9"X14.5"-24pr Severe Duty Ag Tire) (D: 24"X8"X14"-20pr Severe Duty Ag Tire) M12, Nut; (A: (6068hn056)) M12, Nut; M12, (Sub For Ch12391), Nut; M12, (Sub For 14m7031), Nut; M12 (Not Used This Application), Nut; M10, Nut; (A) (B) M12 (For Dc53630 Or Dc203952), Nut; (D) (E) M12, Nut; M12 (Sub For M520012), Nut; M12 (1 Per Tine), Nut; M12 (Sub For Er022122, Appl), Nut; M12, (Use With Ch14525 Bracket), Nut; 12 mm, Nut, Nut; M12, For Steel Trash Board, Nut; (A: 24"X8"X14"-20pr Severe Duty Ag Tire) M12, Nut; M12 (Use With Aw21924), Nut; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12, Nut; M12 (For Dc204796), Nut; M12 (Sub For J950012), Nut; M12 (Sub For Er022122 Appl), Nut; M12, (Sub For Ffsb107245), Nut; (A: Used In High Clearance Tractors Too) M12, Nut; (A: For Type Msl) (B: For Type Nsl/Hsl) M12 (For Dc203952), Nut; M12, (Use With Aw21924), Nut; M12 (Use With 12h301), Nut; M12, (Use With 19m8322), Nut; M12 (European), Nut; When Using Dry Fertilizer Only, Nut; (A: With Autopowr Transmission) M12, Nut; M12 With Mechanical Front Wheel Drive, Nut; (A) M12 (For Dc53631 Or Dc203954), Nut; M12 (For Dc203954), Nut; M12 (Use With 19m8322), Nut; M12 Mount Motor, Nut; M12 (Use With W38233) (Slotted), Nut; M12, Nut; (A) M12 (For Dc53632 Or Dc203956), Nut; (B) M12, Nut; (A: For 2, 20 Meter Pickup) M12, Nut; M12 (C) (D), Nut; (A: 5303 (00*14-), 5403 (0076-), 5503 (0001-).) M12, Nut; M12 (3123 Nla) (Sub For J951012), Nut; M12, (Use With W38849), Nut; (A) M12, Nut; (B: W/O Cab) M12, Nut; M12 3123 Nla Sub For J951012, Nut; M12 (Sub For 14h809), Nut; (A: Required For Field Conversion To Diverter Valve On Independent Marker System) M12, Nut; (C) M12, Nut; (A: For Fork-Type Pickup) M12, Nut; (A: For 1, 81 Meter Pickup) M12, Nut; M12 Rh, Nut; (C) (D) M12, Nut; M12, (A), Nut; M12 M12 Kw.10 Jds118, Nut; M12 (For Dc203956), Nut; 12mm, Nut; M12 (Used On Frames W/Weld Nuts), Nut; (A: 8 Used On Aw20998;9 Used On Aw25322 & Aw25323;10 Used On Aw21000;12 Used On Aw21001 & Aw22984) M12, Nut; (A: For Msl) M12 (For Dc203956), Nut; M12 Used If Tractor Does Not Have Weld Nuts Inside Frame, Nut; M12 (For Dc204798), Nut; (A: For Type Msl) (B: For Type Nsl/Hsl) M12 (For Dc203954), Nut; M12 (B), Nut; M12 (Sub For (1) J950012)(Not Illustrated), Nut; M12 M12, Nut; M12 (Sub For J231212 Or J950012), Nut; M12 (A), Nut; (A: Syncshuttle Transmission - 5420: Sn 4460-, 5520: Sn 45**01-) M12, Nut; M12 Jam, Nut; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12, Nut; M12 Use With Re301596, Nut; M12, When Using Dry Fertilizer Only, Nut; M12 (For Dc203952), Nut; M12 (Slotted) (Use With W38233), Nut; M12, (3015df002) (Sub For Ch12391), Nut; M12 (Hs=10.9), Nut; 12x1.75mm (Sub For 14m3246), Nut; M12 (Apply High Strength Locktite To Thread 15 mm (0.6") Below Cap Screw Head To Retain Nut), Nut; M12, (Sub For J950012), Nut; M12 (For Dc204797), Nut; (A: Required With Piston Pump Fertilizer System.) M12, Nut; (Sub For J950012), Nut; (A: For 575 With Pick Up W/O Precutter) M12, Nut; (A) (B) M12 (For Dc53631 Or Dc203954), Nut; M12 M12 Jds118, Nut; M12, (4019) (Sub For Ch12391), Nut; (B) M12, Nut; (A: (6068hn053)) M12, Nut; (A: For Type Msl) M12 (For Dc203956), Nut; (A: Windrower Option Only) M12, Nut; M12, For Dry Fertilizer Only, Nut; M12 38-Inch Row Spacing Only, Nut; (D) M12, Nut; (A: For Msl) (B: For Nsl) M12 (For Dc203952), Nut; M12, Nut; (Sub For Ffsb107245), Nut; (A) M12 (For Dc53630 Or Dc203952), Nut; M12, (3015df106) (Sub For Ch12391), Nut; (C: 26"X9"X14.5"-24pr Severe Duty Ag Tire) (D: 24"X8"X14"-20pr Severe Duty Ag Tire) M12, Nut; (Sub For J231212), Nut; M12, (Use With Ah209784)	5

See all parts with full part numbers in Heavy Parts AI →

Crank And Knotter Shields

John Deere : 338 - Baler : Crank And Knotter Shields

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	4
03***72	Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 5/16" X 1/2", Bolt; (B) 5/16"X1/2", Bolt; 5/16" X 1/2", (3.7 M (12-Ft.), 9 Used Per Tooth Bar) (4.3 M (14-Ft.), 12 Used Per Tooth Bar) (4.8 M (16-Ft.), 12 Used Per Tooth Bar), Bolt; 5/16"X1/2", Bolt; 5/16" X 1/2", 9 Used, 3.7m (12 Ft); 12 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 5/16" X 1/2", Each Additional Tooth Bar, Bolt; 5/16" X 1/2", (Per Tooth Bar), Bolt; (Sub For Mg280616), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.), Bolt; 5/16" X 1/2" (215 And 216-1 Used; 218, 220, 222, And 224-2 Used; 230-4 Used), Bolt; 5/16" X 1/2" (Sub For 03h1607), Bolt; (C) 5/16" X 1/2", Bolt; (B) 5/16" X 1/2", Bolt; 5/16x1/2", Bolt, Bolt; (C) 5/16"X1/2", Bolt; 5/16" X 1/2" (915-1 Used; 918, 920, 922, 924 And 925- 2 Used; 930-4 Used), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7m (12-Ft.) (12 Used Per Tooth Bar, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; (A) 5/16" X 1/2", Bolt; X 5/16" X 1/2", Bolt; 5/16" X 1/2" (A), Bolt; 5/16" X 1/2", 9 Used Per Tooth Bar, 3.7 M (12-Ft.) 12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 5.0 M (16-Ft.)	0
14***03	Nut; (B: All-Run And Primary Only Systems (Master Controller)) M6, Nut; M6 Hex, Nut; M6 (Sub For 44*45), Nut; (A: For 9650 (-6900) & 9750 (-6900)) M6, Nut; M6 (Use With R139128), Nut; (A: See Your Authorized Repair Station For Parts Not Listed) M6, Nut; M6 (For Az43879), Nut; M6 (A), Nut; (C: (5410) 3449- (5510) 3535-) M6, Nut; M6 (Sub For Lvu10099), Nut, Nut; M6 (10.9), Nut; M6 (Sub For 14m7165 Appl), Nut; M6 (To Alternator), Nut; (A: Syncshuttle Transmission) M6, Nut; (A: Only For North America And Japan) M6, Nut; (B: Used In 2wd With Park Brake) M6, Nut; (A: Syncshuttle Transmission/Collarshift Transmission) M6, Nut; (B: 30 Ft And 35 Ft Or 36 Ft Machines) M6, Flange Nut; (Sub For Ffsb108288), Nut; M6 (A), Less Greenstar, Nut; M6 Rear Power Take-Off, Nut; (A) M6, (3015df002), Nut; M6, (A), Nut; M6 R.H., Nut; M6 Rh Only, Nut; (C: (5210) 3224- (5310) 3389-) M6, Nut; (A: Only For Spain) M6 Lh, Rh, Nut; (C: Cab) M6, Nut; M6 (Use With R138044), Nut; M6 M6 X 1 Hex, Nut; (B: Isolated Open Operator Station) (C: With Cab) M6, Nut; M6 Alternator Terminal, Nut; (A: For 9650 (-6967) & 9750 (-6957)) M6, Nut; (A: For 645 Pick-Up Only) M6, Nut; M6, (Code 3101 And 3106), Nut; (A: United Kingdom, France, Germany And Sweden) M6, Nut; M6, (Use With Ah166260 And H160476), Nut; M6 (Sub For Er022087 Appl), Nut; (B: Ground Terminal) M6, Nut; (B: 4" System) M6, Nut; M6 (Use With R139124 Or R139128), Nut; (Sub For M87828) (Used W/3011df, 3014df, 4019df - Rg60480 Kit) (4019tf - Rg60533 Kit), Nut; M6 (Sub Ah166260 And H160476), Nut; (C: 5303 (Xxxxxx- 0000), 5403 (Xxxxxx- 0032), 5503 (Xxxxxx- Xxxxxx)) M6, Nut; (A: For 9650 (6968-) & 9750 (6958-)) M6, Nut; (B: Dual) M6, Nut; (A: Triple) M6, Nut; (C: (5210) 3222- (5310) 3392-) M6, Nut; M6, (Df105), Nut; M6 (Flange), Nut; M6, (Sub For M87828), Nut; M6, 3101, 3106, Nut; (A) (B) M6, Nut; M6 (Center Stud), Nut; M6 Use For One Or Two Controllers, Nut; (C: (5410) 3448- (5510) 3528-) M6, Nut; (A: 9550 (6901-) 9550sh (9601-)) M6, Nut; M6, Focus L3 Engine Control Unit To Mounting Plate, Nut; M6 (Use With R117194), Nut; M6 Less Greenstar, Flange Nut; M6, (Sub For Ffsb108288), Nut; (A: For Hillmaster Ii) M6, Nut; (B: For Hillmaster Ii) M6, Nut; (A) M6, Without Greenstar, Nut; M6, (Hs, Head Marked 10.9), Nut; M6 M6 (Sub For Er022087 Appl), Nut; (A: For 9650 (6901-) & 9750 (6901-)) M6, Nut; M6 (Use With Ah166260 And H160476), Nut; (A: Triple) (B: Dual) M6, Nut; (A: Condition Monitoring System Components) M6, Nut; M6, Required For Double Cv Joint, Nut; M6 (Use With Re239076), Nut; (A: With Manual Shoe Adjust) M6, Nut; (A: 9550 (-6900) 9550sh (-6900)) M6, Nut; (A: Single) M6, Nut; M6, M6, Nut; (A: From Sr.No 5310s(0084-), 5410 (0019-), 5610 (0001-).) M6, Nut; (A: Note; 9550 (-7000) 9550sh (-7000)) M6, Nut; M6 (Harness To Alternator), Nut; (A: All-Run System (Slave Controllers)) M6, Nut; (B: Without Transport Option) M6, Nut; (A: Note; 9550 (7001-) 9550sh (7001-)) M6, Nut; (A: With Transport Option) M6, Nut; M6 (A), (B), (C), Nut; M6 (A) (B), Nut; (A: For Corn) M6, Nut; M6, Used On 03m7251, Flange Nut; M6, (K), Nut; M6 M6, Nut; M6 (Sub For 4328), Nut; (C: Note; 9550 (-7000) 9550sh (-7000)) M6, Nut; (A: 5303 (0001-), 5403 (0033-), 5503 (Xxxxxx-)) M6, Nut; (C) M6, Nut; M6 Lh, Rh, Nut; M6 (Not Illustrated), Nut; M6 (Use With R139124, R139128), Nut; (C: United Kingdom, France, Germany And Sweden) M6, Nut; (Sub For M87828) (Df105), Nut; M6 Rh, Nut; (C: Primary Only System (Slave Controllers)) M6, Nut; (A), Nut; (A: Straddle Mount) M6, Nut; M6 (Used 0n 03m7251), Nut; M6 M6 (For Az43879), Nut; (A: With Cab) (B: Isolated Open Operator Station) M6, Flange Nut; M6, (Not Illustrated), Nut; M6 Used On 03m7251, Nut; M6 R.H. Only, Nut; M6 (B), Flange Nut, Nut; (Center Stud), Nut; (B) M6, Nut; (A: From Serial No: 5310s-0040) M6, Nut; (B: Only For France) M6 Lh, Nut; M6, (3015df106), Nut; (A: 40 Ft And 42 Ft Machines) M6, Nut; M6, (Sub For M87828) Pt 3/8, Nut; (A) M6, Nut; (A: 9550 (6901-) 9550sh (6901-)) M6, Nut; M6 (A) (B) (C), Nut; (A: With Open Operator'S Station) M6, Nut; M6, Nut; M6 (Sub For L79493 Appl), Nut; (A: 9550 (-6900) 9550sh (-6900)) M6, Nut; M6 (For Dc204046, Dc46996), Flange Nut; M6, Nut; (B: Cab) M6, Nut; M6 (Sub For Ah206382), Nut; M6 (Sub For N10217), Nut; (A: (-Xxxxxx) 7700-0084; 7800-01*89) M6, Nut; (C: Triple) M6	8
19***48	Bolt; 1/4" X 3/4", Right-Hand, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle - 2 Used) (Bucket - 54 Used), Bolt; (B) 1/4" X 3/4", Bolt; 1/4" X 3/4", Bolt; 1/4" X 3/4", Hs, Sae 8, Bolt; (A: Install In 1 Select. Control Valve) 1/4" X 3/4", Bolt; 1/4" X 3/4" (To Transmission Sight Tube Bracket), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Bolt; 1/4" X 3/4", (Europe), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 66 Used), Bolt; 1/4" X 3/4", Not Used This Application, Cap Screw; 1/4" X 3/4", Bolt; 1/4" X 3/4", (84 Used For 714, 714a; 98 Used For 716, 716a), Bolt; 1/4"X3/4", Bolt; 1/4' X 3/4", Bolt; 1/4" X 3/4", (Use With Gd1072), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; (A) 1/4" X 3/4", Bolt; 1/4" X 3/4", Europe, Bolt; 1/4" X 3/4" (Use With 14h786 And 24h1286), Bolt; 1/4" X 3/4", (Sub For Mg88573), Bolt; 1/4" X 3/4" 1/4 X 3/4, Bolt; 1/4" X 3/4" (Sub For 19h1919, This Application), Bolt; 1/4" X 3/4" (A), (B), Bolt; 1/4" X 3/4", Sweden Only, Bolt; 1/4" X 3/4", (Sub For Hmx03107), Bolt; 1/4" X 3/4", (Use With 12h302 And 14h786), Bolt; (A: 6076trw07 Only) 1/4" X 3/4", Bolt; 1/4" X 3/4", 7000 Flex-Fold And 7100 Integral Planters Only, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle-2 Used; Bucket-96 Used), Bolt; 1/4" X 3/4" (Use With 14h786), Bolt; 1/4" X 3/4", Herbicide Only, Bolt; 1/4" X 3/4", (Not Used W/E55662), Bolt; 1/4"X3/4, (Use With Ar91662, Re30685), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used), Bolt; 1/4"X3/4 (For Ar91662, Re30685), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4" (911), Bolt; 1/4" X 3/4" (A), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle), Cap Screw, Bolt; (A: ( -Xxxxxx) 8560-00*03; 8760-0051; 8960-00**14) 1/4" X 3/4", Bolt; (Use With Pt17843 Windowpane), Bolt; 1/4" X 3/4" Amber, Bolt; 1/4" X 3/4", (4402,4403), Bolt; 1/4" X 3/4", Amber, Bolt; (C) 1/4" X 3/4", Bolt; 1/4" X 3/4", 28" Rows Only, Bolt, Bolt; 1/4" X 3/4" (Sub For At216052), Bolt; 1/4" X 3/4", Germany And Italy, Bolt; 6.350 X 19.050 mm, Bolt; 1/4" X 3/4", (4408,4409), Bolt; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4" X 3/4", Bolt; (A) 1/4"X3/4", Bolt; 1/4" X 3/4", Small Hopper, Bolt; X 1/4" X 3/4", Bolt; 1/4" X 3/4" 1/4" X 0.75" (Sub For R138749), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle), Bolt; 1/4" X 3/4" (Europe), Bolt; 1/4" X 3/4", (56 Used For 714, 714a; 64 Used For 716, 716a), Bolt; 1/4" X 3/4", (Code 1637), Bolt; 1/4" X 3/4" (Not Illustrated), Cap Screw; 6.350 X 19.050 mm, Bolt; (A) R.Bosch,1/4"X3/4", Bolt; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4" X 3/4", Bolt; 1/4" X 3/4", (4402-4403), Bolt; 1/4" X 3/4" 1/4 X 3/4", Bolt; (A) 6.350 X 19.050 mm (1/4" X 3/4"), Cap Screw; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Bolt; 1/4" X 3/4" (4408-4409), Bolt; 1/4" X 3/4", ((3) Less Cab) ((2) Cab), Bolt; 1/4" X 3/4" For Steel Cleaning Paddles, Bolt; 1/4" X 3/4", ((3) Used Less Cab, (2) Used With Cab), Bolt; (C) (D) 1/4" X 3/4", Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Bolt; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4" (For Az100822), Bolt; 1/4" X 3/4" (8630), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 96 Used), Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used)	2

See all parts with full part numbers in Heavy Parts AI →

Decal Kit(English And Spanish)

John Deere : 338 - Baler : Decal Kit(English And Spanish)

BE***92	Label Kit; (English/Spanish Decal Kit)	1
E8***64	Label; Caution (Spanish) (Sub For E80908), Label; (Sub For E80908) Caution (Spanish), Label; Cautions(Spanish)	1
E8***63	Label; Warning-540rpm (Spanish), Label; (Sub For E80907) Warning - 540 Rpm (Spanish), Label; (Sub For E80907 )Warning - 540 Rpm (Spanish), Label; Warning-540rpm(Spanish), Label; Warning - 540 Rpm (Spanish) (Sub For E80907)	1
FH***93	Safety Sign; (Danger Label)	1

See all parts with full part numbers in Heavy Parts AI →

Double-Acting Hydraulic Cylinder

John Deere : 338 - Baler : Double-Acting Hydraulic Cylinder

11***71	Cotter Pin; 8 X 50 mm, Cotter Pin; X, Cotter Pin; 8 X 40 mm, Cotter Pin; (A) 8 X 40 mm, Cotter Pin, Cotter Pin; 8 X 40 mm (Use With A32475), Cotter Pin; 0.315" X 1.575", Cotter Pin; 8x40mm, Cotter Pin; 8 X 40 mm, (Use With A32475), Cotter Pin; 8 X 40 mm, (Sub 11m7041), Cotter Pin; 8 X 40 mm (0.315" X 1.575"), Cotter Pin; 8 X 40 mm, (Category 1 Hitch), Cotter Pin; 8 X 40 mm (Use With A32475 Or N134600)	4
A1***46	Pin; (A) (Sub For Cc23844, This Application), Pin; (Sub For A3581r), Pin; (Sub For Ty7162 Or Ty7014), Pin; (Sub For Z27858 Or L24810), Pin; (Sub For Ty7162), Pin; (C: To Make Semi-Mount Compatible With 4700 Tractors) (D: Accommodates Category 1 Hitch), Pin; (A: 446( - 13*93) 546( - 1373)) (1 Used On 446)(2 Used On 546), Pin, Pin; (Sub For Ty7014), Pin; (B), Pin; (Use With Ah143871), Pin; (A), Pin; (A) (1 Used On 466)(2 Used On 566), Pin; (Sub For A3581r, This Application), Pin; (C: Starting From Series Number 2109 (0701- ), 2111 (0601- ), 2113 (0604- ), 2115 (0602- )) (D: Starting From Series Number 2117 (0602- ), 2122 (0601- ), 2126 (06**06- )) 2130, Pin; (A) (1 Used On 456)(2 Used On 556), Pin; (Sub For A3581r) Appl	2
A3***75	Pin Fastener; 25.500 X 106 mm, (Sub N134600), Pin Fastener; (Sub N134600), Pin Fastener; (Use With 11m7071), Pin Fastener; 25.500 X 106 mm (1.004" X 4.173"), Pin Fastener, Pin Fastener; 25.500 X 106 mm (1.004" X 4.173") (Sub N134600)	2
A4***66	End; (B: Items Included In Ae42001), End; Rear, End, End; (Use With An240670), End; (B)	1

See all parts with full part numbers in Heavy Parts AI →

Decal Kit (English) ( - 992599)

John Deere : 338 - Baler : Decal Kit (English) ( - 992599)

A5***18	Label; (A) (Sub For Jd5438), Label; Warning-540 Rpm, (Sub For Jd5438), Label; Warning (Operate At 540 Rpm), Label; Warning - 540 Rpm, (Sub For Jd5438), Label; (Warning: Operate With 540 Rpm) (Sub For Jd5438), Label; "540 Rpm" (For Power Shaft Shield, L.H. Side) (Sub For Jd5438), Label; Warning - 540 Power Drive Safety Shields, (Sub For Jd5438), Label; Warning - Bodily Injury, (Sub For Jd5438), Label; 540 Rpm Power Take-Off Hookup, Label; (Sub For Jd5438) 540 Rpm Hookup, Label; 540 Rpm Power Take-Off Hookup, (Sub For Jd5438), Label; Power Take-Off Warning, (Sub For M117557 Or Jd5438), Label; Power Take-Off Warning, (Sub For Jd5438), Label; Warning - 540 Rpm, Label; 540 Rpm-Warning, (Sub For Jd5438), Label; Warning: Power Drive Shields, (Sub For Jd5438), Label; (Sub For Jd5438), Label; Warning (540 Rpm Power Take-Off), Label; Warning - 540 Rpm (Sub For Jd5438), Label; 540 Rpm, (Sub For Jd5438), Label; (540 Rpm Power Take-Off) Warning, Label; (Sub For Jd5438) Warning - 540 Rpm, Label; Warning - Power Drive Shields, (Sub For Jd5438), Label; 540 Rpm Power Take-Off Warning, Label; (Sub For Jd5438) Warning, Label; Bodily Injury Warning, (Sub For Jd5438), Label; Warning-540 Power Drive Safety Shields, (Sub For Jd5438), Label; (Sub For Jd5438) 540 Rpm Power Take-Off Hook-Up	1
AE***23	Label Kit; 338 Model Identification (Includes Front And Rear)	1
AE***26	Label Kit; (Sub For Ae46988), Label Kit; (Sub For Ae47655)	1
E8***92	Sign; Twine Threading (Four Ball Box) (Sub For E56925), Sign; Twine Threading, (Sub For E54016 And E56925, This Application), Sign; Twine Threading, (Sub For E56925), Slide; Assembly. Rh, Sign; Twine Threading, (Sub For E54016, This Application) (Sub For E67340), Sign; (Sub For E67340) Twine Threading (Four Ball Box), Sign; (Sub For E56925) Twine Threading (Four Ball Box), Sign; Twine Threading (Four Ball Box)	1

See all parts with full part numbers in Heavy Parts AI →

Decal Kit (English) (992600 - )

John Deere : 338 - Baler : Decal Kit (English) (992600 - )

A5***18	Label; (A) (Sub For Jd5438), Label; Warning-540 Rpm, (Sub For Jd5438), Label; Warning (Operate At 540 Rpm), Label; Warning - 540 Rpm, (Sub For Jd5438), Label; (Warning: Operate With 540 Rpm) (Sub For Jd5438), Label; "540 Rpm" (For Power Shaft Shield, L.H. Side) (Sub For Jd5438), Label; Warning - 540 Power Drive Safety Shields, (Sub For Jd5438), Label; Warning - Bodily Injury, (Sub For Jd5438), Label; 540 Rpm Power Take-Off Hookup, Label; (Sub For Jd5438) 540 Rpm Hookup, Label; 540 Rpm Power Take-Off Hookup, (Sub For Jd5438), Label; Power Take-Off Warning, (Sub For M117557 Or Jd5438), Label; Power Take-Off Warning, (Sub For Jd5438), Label; Warning - 540 Rpm, Label; 540 Rpm-Warning, (Sub For Jd5438), Label; Warning: Power Drive Shields, (Sub For Jd5438), Label; (Sub For Jd5438), Label; Warning (540 Rpm Power Take-Off), Label; Warning - 540 Rpm (Sub For Jd5438), Label; 540 Rpm, (Sub For Jd5438), Label; (540 Rpm Power Take-Off) Warning, Label; (Sub For Jd5438) Warning - 540 Rpm, Label; Warning - Power Drive Shields, (Sub For Jd5438), Label; 540 Rpm Power Take-Off Warning, Label; (Sub For Jd5438) Warning, Label; Bodily Injury Warning, (Sub For Jd5438), Label; Warning-540 Power Drive Safety Shields, (Sub For Jd5438), Label; (Sub For Jd5438) 540 Rpm Power Take-Off Hook-Up	1
AE***27	Label Kit	1
E8***92	Sign; Twine Threading (Four Ball Box) (Sub For E56925), Sign; Twine Threading, (Sub For E54016 And E56925, This Application), Sign; Twine Threading, (Sub For E56925), Slide; Assembly. Rh, Sign; Twine Threading, (Sub For E54016, This Application) (Sub For E67340), Sign; (Sub For E67340) Twine Threading (Four Ball Box), Sign; (Sub For E56925) Twine Threading (Four Ball Box), Sign; Twine Threading (Four Ball Box)	1
E8***65	Label; Danger - Entanglement (Spanish), Label; (A: Driveshaft), Label; (B: Spanish), Label; Danger - Entanglement (Spanish) (Sub For E80909), Label; (Sub For E80909) Danger - Entanglement (Spanish)	1

See all parts with full part numbers in Heavy Parts AI →

Decal Kit (French)

John Deere : 338 - Baler : Decal Kit (French)

AE***17	Label Kit, Label Kit; Attaching Procedures	1
E8***13	Label; (B: French Label Kit), Label; (Sub For E74076) Drive Line Entanglement, Label; (A: French), Label; Danger - Drive Line Entanglement (Sub For E74076), Label; Driveline Entanglement (French-Canadian) (Sub For E74076), Label; Driveline Entanglement (French), Label; (Sub For E74076) Danger, Label; (A) "Danger" Drive Line Entanglement (French), Label; Danger - Driveline Entanglement, Plate Lh, Label; Danger, (Sub For E74076), Label; Danger (Power Take-Off), Label; Danger - Rotating Parts, (Sub For E74076), Label; Danger - Rotating Parts, Label; Danger (Driveline Entanglement), Label; (Sub For E74076) Danger - Drive Line Entanglement, Label; (French), Label; Driveline Entanglement, Label; Danger-Drive Line Entanglement (French), Label; Driveline Entanglement, (Sub For E74076), Label; French, Label; (Sub For E74076) Driveline Entanglement, Label; (B), Label, Label; Danger - Drive Line Entanglement (French), Label; Danger - Driveline Entanglment, Label; (Sub For E74076) French, Label; (A), Label; (A: Driveshaft), Label; Danger, Label; (Sub For E74076), Label; (A: For North America (French) Only), Label; Danger - Drive Line Entanglement, (Sub For E74076), Label; Drive Line Entanglement, Label; Danger: Entanglement, (Sub For E74076)	1
E8***39	Label; Warning - Bodily Injury, (Sub For E61145), Label; French, Label; Warning: Bodily Injury, (Sub For E61226 Or E61145), Label; Warning - Bodily Injury (Sub For E61145), Label; (Sub For E61145) Warning - Bodily Injury	2
E8***37	Label; Warning, Label; Rotating Parts, Label; French, Label; Rotating Parts, (Sub For E63925), Label; (Sub For E63925)	1

See all parts with full part numbers in Heavy Parts AI →

Decals

John Deere : 338 - Baler : Decals

FH***36	Instruction Plate	1
FH***58	Safety Sign, Safety Sign; Safety Sign	1

See all parts with full part numbers in Heavy Parts AI →

Double Acting Hydraulic Cylinder (Tie Bolt)

John Deere : 338 - Baler : Double Acting Hydraulic Cylinder (Tie Bolt)

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	8
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	1
19***17	Bolt; 3/8" X 1-3/4", (Low), Bolt, Bolt; 9.525 X 44.450 mm, Bolt; 3/8" X 1-3/4" (Use With Re63295), Bolt; 3/8" X 1-3/4" (Sae 8), Bolt; 3/8" X 1-3/4" (Engine Mounting), Cap Screw; (E) 3/8" X 1-3/4", Bolt; 3/8"X1-3/4", (Sub For 19h2633), Bolt; 3/8" X 1-3/4", Hs, Sae 8, Bolt; 3/8" X 1-3/4" (Low), Bolt; 3/8" X 1-3/4", (Sae 8), Bolt; 3/8" X 1-3/4" (Sub For 19h3693), Bolt; 3/8" X 1-3/4" Hs Sae 8, Bolt; 3/8"X1-3/4", Bolt; 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4" (Hs, Sae 8) Shear Bolt, Bolt; (Hs, Sae 8), Bolt; 3/8" X 1-3/4" Sub For 19h3065, Bolt; 3/8" X 1-3/4" Low, Bolt; 3/8" X 1-3/4", Low, Bolt; 3/8" X 1-3/4", (Lower), Bolt; 3/8" X 1-3/4", Code 3904, Cap Screw; 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4" (Use With R109859), Bolt; 3/8" X 1-3/4", Torque To 46 Lb-Ft (63 N-M), Bolt; 3/8" X 1-3/4", (Sub 19h3772, This Application), Bolt; 9.525 X 44.450 mm, (Low), Bolt; 3/8" X 1-3/4" (Use With 14h812), Bolt; 3/8" X 1-3/4" (Hs, Sae 8) (A), (B), Cap Screw; 3/8" X 1-3/4", (Lower), Bolt; 3/8" X 1-3/4", (Use With Re63295), Bolt; (K) 3/8" X 1-3/4" (Hs, Sae 8), Bolt; (Sub For 19h1800), Bolt; 3/8" X 1-3/4", Lower, Bolt; 3/8" X 1-3/4" (Sub For Ty7101, This Application), Bolt; 3/8" X 1-3/4" 3/8" X 1-3/4", Bolt; 9.525 X 44.450 mm (3/8" X 1-3/4"), Bolt; 3/8" X 1-3/4" Sub For 19m7179, Bolt; (A) 3/8" X 1-3/4" (Hs, Sae 8) (Sub For Mg9706689), Bolt; (A) 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4" (Sub For M121677), Bolt; 3/8" X 1-3/4" (Hs, Sae 8) Except Rear, Bolt; 3/8" X 1-3/4", (Lower Front), Bolt; 3/8" X 1-3/4", (Code 1202), Bolt; 3/8" X 1-3/4" (Lower), Bolt; 3/8" X 1-3/4" (Lower Front), Bolt; 3/8" X 1-3/4" (Hs, Sae 8), Bolt; 3/8" X 1-3/4" (A), Bolt; 3/8" X 1-3/4" Hs, Sae 8, Bolt; 3/8" X 1-3/4" (Sub 19h3772, This Application), Bolt; 3/8" X 1-3/4", (Sub For Ty7101, This Application)	1
2***E	Spring Locking Pin; Spring Locking, Spring Locking Pin, Spring Locking Pin; (Sub For Ty7014, This Application), Spring Locking Pin; (Use With N171089)	2

See all parts with full part numbers in Heavy Parts AI →

Driveline Shield (Plastic)

John Deere : 338 - Baler : Driveline Shield (Plastic)

19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	3
E1***01	Face Shield, Face Shield; Plastic	1
N1***15	Lock Nut; 3/8", Lock Nut; 3/8", Self-Locking, Lock Nut; (Sidehill), Lock Nut; 3/8", (Use With 19h1731), Lock Nut; (R.H.), Lock Nut; (E: 3/8" Flange) 9.525 mm, Lock Nut; 3/8", (For Rigid Mount), Lock Nut; 3/8", (4-Rrc), Lock Nut; X X 3/8", Lock Nut; 9.525 mm (3/8") 1990 Ccs, Lock Nut; 3/8", (6 Used Per Tooth Bar, 3.7 M (12-Ft.) (8 Used Per Tooth Bar, 4.3 M (14-Ft.), Lock Nut; 9.525 mm (3/8"), Lock Nut; (6 Per Tooth Bar, 3.7 M (12-Ft.) (8 Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft), Lock Nut; 9.525 mm (3/8") (Sub For 14h812, And 12h304this Application), Lock Nut; 0,375", Lock Nut; (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft), Lock Nut; (Variable Drive), Lock Nut; X 3/8", Lock Nut; (38"), Lock Nut; 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Lock Nut; 3/8", (With Iron-Gard), Lock Nut; 9.525 mm (Except Europe), Lock Nut; (30", 4 Used) (38", 2 Used), Lock Nut; X 3/8" (Sub For H23980), Lock Nut; (Sub For 14h812, And 12h304this Application), Lock Nut; 3/8", (Use With N219634), Lock Nut; 3/8", Required Only If Not Equipped With Spout-Trak, Lock Nut; (30"), Lock Nut; 9.525 mm (Sub 14h1087, This Application), Lock Nut; 3/8", (Sub For Mg247780), Lock Nut; (W) (F) 3/8", Lock Nut; Flange, Lock Nut; 9.525 mm (R.H.), Lock Nut; 3/8", (K1) (Sub For Mg247780), Lock Nut; X Sp, Lock Nut; 3/8", Conventional Units Only, Lock Nut; Serrated, Lock Nut; (A)(B)(C) 3/8", Lock Nut; 3/8", (Sub For 14h1076 And 12h304, This Application), Lock Nut; Germany, Lock Nut; 3/8", (Per Reel Bat), Lock Nut; 3/8", Rear, Lock Nut; (Long), Lock Nut; 3/8-16, Lock Nut; 3/8", (Code 2819), Lock Nut; 3/8" (W/ Dc18427) \|, Lock Nut; 9.525 mm, Incld In 1, Lock Nut; (Less Iron-Gard), Lock Nut; (B) 9.525 mm, Lock Nut; 3/8", (Per Tooth Bar), Lock Nut; R.H. (Sub For An153144), Lock Nut; 3/8", (Sub For 14h1076 And 14h812, This Application), Lock Nut; (B), Lock Nut; 3/8", With Single And Double Auger, Lock Nut; (12 Ft., 15 Ft. And 18 Ft. With Conditioner), Lock Nut; (C) 9.525 mm (3/8"), Lock Nut; 9.525 mm (Sub For 14h1076, This Application), Lock Nut; 9.525 mm (Use With N219634), Lock Nut; Cable Trip Only, Lock Nut; 3/8", (Sub For 14h812, This Application), Lock Nut; (4 Used, 327; 2 Used, 337), Lock Nut; 3/8", (10 Used, Long Tongue) (6 Used, Short Tongue), Lock Nut; (A: Mg803115 Light Kit), Lock Nut; (B) 3/8", Lock Nut; 3/8", (2 Used On Each Side), Lock Nut; (A) 3/8", Lock Nut; 3/8", (Use With N14822), Lock Nut; 3/8", (5 Used, 3950) (4 Used, 3970), Lock Nut; (B) (Sub E59406, This Application), Lock Nut; 3/8", (675b), Lock Nut; 3/8", (Sub For 14h1076), Lock Nut; (6 Used Per Tooth Bar, 3.7m (12-Ft.)(8 Used Per Tooth Bar,4.3m (14-Ft.) & 4.9m (16-Ft.), Lock Nut; (A) (B) (C) 3/8", Lock Nut; (6 Used Per Tooth Bar, 3.7 M (12-Ft.) (8 Used Per Tooth Bar, 4.3 M (14-Ft.), Lock Nut; 3/8", Lock Nut; 3/8", Serrated, Lock Nut; 9.525 mm (Sub For 14h1076, And 14h812this Application), Lock Nut; 3/8", (10 Used, Long Tongue) (9 Used, Short Tongue), Lock Nut; U/W Steel And Plastic Shields, Lock Nut; (6 Used, Each Additional Tooth Bar), Lock Nut; 9.525 mm (Sub For 14h812, This Application), Lock Nut; 9.525 mm, Lock Nut, Lock Nut; 3/8", (16'0" Flex Fold), Lock Nut; 3/8", Jam, (Use With N219634), Lock Nut; 3/8", (200), Lock Nut; (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Lock Nut; (Sub 14h1087, This Application), Lock Nut; 3/8" (Sub For 14h812), Lock Nut; (3014), Lock Nut; 3/8", (Sub For 14h1076, This Application), Lock Nut; 3/8", (Sub For 14h812, This Application), Lock Nut; 3/8", (Use With 95 Amp), Lock Nut; (Sub 12h304 And 14h812), Lock Nut; 3/8", (Use With Mg622490), Lock Nut; (Sub For Mg247780), Lock Nut; U/W Steel Or Platic Shields, Lock Nut; (4 Used On 300a; 6 Used On Grass Seed Special), Lock Nut; 9.525 mm Incld In 36, Lock Nut; 9.525 mm (3/8") (Sub For 14h812, This Application), Lock Nut; 3/8", (10 Maximum), Lock Nut; 3/8", (24 Used, 3940) (23 Used, 3960), Lock Nut; 9.525 mm Flange, Lock Nut; 9.525 mm (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Lock Nut; French Only, Lock Nut; 3/8", (Sub For 14h812 And 12h304, This Application), Lock Nut; (A), Lock Nut; (213-5; 215 & 216-6; 218-7; 880-8), Lock Nut; 9.525 mm (3/8") Flange, Lock Nut; (3/8) To Replace Weld Stud Use 03h1765, Lock Nut; 3/8" (W/ Dc18427), Lock Nut; (2 Used, 347; 4 Used, 467), Lock Nut; (Sub For (4) E59406), Lock Nut; 3/8", Code 2805, Lock Nut; 0, 375", Lock Nut; (3 Used, 130; 7 Used, 135), Lock Nut; 3/8" (Sub For 14h812, This Application), Lock Nut; 3/8" (Flanged Nut), Lock Nut; Use With Steel Or Plastic Shields, Lock Nut; 3/8", (9 Used, Less Cab) (4 Used, With Cab), Lock Nut; 3/8", (Use With R35668), Lock Nut; Each Additional Tooth Bar, Lock Nut; (10 Used, Long Tongue) (6 Used, Short Tongue), Lock Nut; (B: W/O Intelliguard), Lock Nut; (Sub N14822), Lock Nut; 9.525 mm (3/8") (38"), Lock Nut; Rear, Lock Nut; (214), Lock Nut; 3/8", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Lock Nut; (G) 3/8", Lock Nut; (Sub For 14h812, This Application), Lock Nut; 3/8", 6 Used Per Tooth Bar, 3.7 M (12-Ft.) 8 Used Per Tooth Bar, 3.7 M (12-Ft.) And 5.0 M (16-Ft.), Lock Nut; 9.525 mm (3/8") (Sub For 14h1076, This Application), Lock Nut; (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; 224-26 Used), Lock Nut; 3/8", (Sub For 14h1076, This Application), Lock Nut; (6 Per Reel Bat, 3.7 M (12-Ft.) (8 Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Lock Nut; 9.525 mm (914), Lock Nut; (B: Mg803116 Warning Light Kit), Lock Nut; 9.525 mm, Use With New Main Frame, Lock Nut; 3/8", (483), Lock Nut; (A: With Net Wrapping), Lock Nut; 3/8, Lock Nut; (Sub For 14h1076 And 12h304, This Application), Lock Nut; Sweden Only, Lock Nut; 3/8", (Except Europe), Lock Nut; (Use With R35668), Lock Nut; (Sub For 14h1076, This Application), Lock Nut; (E) 3/8", Lock Nut; 3/8", (Use With C2175r), Lock Nut; 3/8", (700), Lock Nut; (C), Lock Nut; 3/8", (6207), Lock Nut, Lock Nut; X, Lock Nut; 3/8" Flange	3

See all parts with full part numbers in Heavy Parts AI →

Equal Angle Hitch

John Deere : 338 - Baler : Equal Angle Hitch

10***56	Bolt; 3/8" X 3-1/4" (B), Bolt; (B) 3/8" X 3-1/4", Bolt; 3/8" X 3-1/4", Bolt; (C) 3/8" X 3-1/4"	1
1***E	Compression Spring, Compression Spring; (A), Compression Spring; (B), Compression Spring; (C)	1
14***93	Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)	2
14***13	Lock Nut; M24, (Sub For Ffsb108864), Lock Nut; M24, Lock Nut, Lock Nut; M24 (B), Lock Nut; M24 (Sub For 14m7318)	1

See all parts with full part numbers in Heavy Parts AI →

Feeder Drive

John Deere : 338 - Baler : Feeder Drive

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	3
03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	3
03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	3
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	4

See all parts with full part numbers in Heavy Parts AI →

Feeder Drive Gears

John Deere : 338 - Baler : Feeder Drive Gears

11***82	Cotter Pin; 2.500 X 25 mm (0.098" X 0.984") (Sub For 11m7081), Cotter Pin; 2.500 X 25 mm, (Sub For 11h206), Cotter Pin; 2.500 X 25 mm, (Not Used W/ R70832), Cotter Pin; 2.500 X 25 mm (0.098" X 0.984"), Cotter Pin; 2.500 X 25 mm (Sub For 11h234, This Application), Cotter Pin; (A) (B) 2.500 X 25 mm, Cotter Pin; 2,5 X 25 mm, Cotter Pin; 2,5x20mm, Cotter Pin; 0.098" X 0.984", Cotter Pin; 2.500 X 25 mm, (Use With R47063), Cotter Pin; 2,5 X 25 mm (For P48769), Cotter Pin; 2.500 X 25 mm 6-Row, Cotter Pin; 2,5x25mm (Sub For 11h234), Cotter Pin; (C: (-Xxxxxx) 7600-00*26; 7700-0004; 7800-0003) 2.500 X 25 mm, Cotter Pin; (B), Cotter Pin; 2.500 X 25 mm, Cotter Pin; 2.500 X 25 mm, (Sub For 11m7081), Cotter Pin; 2.500 X 25 mm, (Sub For 11m7081), Cotter Pin; 2.500 X 25 mm, (Ru And Or), Cotter Pin; (B) 2.500 X 25 mm, Cotter Pin; 2.500 X 25 mm (Use With De18704 And De18705), Cotter Pin; 2.500 X 25 mm, Cotter Pin; 2.500 X 25 mm, (Sub For Et11497), Cotter Pin, Cotter Pin; 2.500 X 25 mm Upper, Cotter Pin; 2.500 X 25 mm, (Not Used W/ R70826), Cotter Pin; 2.500 X 25 mm, (Sub For Ch12317), Cotter Pin; 2.500 X 25 mm (A), Cotter Pin; (D: Up To Series 2109 (-Xxxxxx), 2111 (-Xxxxxx), 2113 (-0749), 2115 (-0725)) (E: Up To Series 2117 (-0735), 2122 (-0706), 2126 (-0710)) 2.500 X 25 mm, Cotter Pin; (B: Syncshuttle Transmission - 5425: Sn -1479, 5525: Sn -1531) 2.500 X 25 mm (Use With Re178498), Cotter Pin; 2.500 X 25 mm, (Sub For 11h234), Cotter Pin; (A) 2.500 X 25 mm, (Sub For 11h234), Cotter Pin; (B: Syncshuttle Transmission - 5225: Sn -1288, 5325: Sn -13*74) 2.500 X 25 mm (Use With Re178498)	1
14***26	Nut; 1/2" Unf Slotted, Nut, Nut; 1/2", Nut; 1/2" (Sub For B3279r), Nut; 12.700 mm, Nut; 1/2", Nut; 1/2" Slotted, Nut; 1/2" (W/ E38908), Nut; 1/2" (A), Nut; 1/2", Slotted, Unf	1
24***41	Washer; X X 17/32" X 15/16" X .060", Washer; 17/32" X 15/16" X 0.060", (154"), Washer; 17/32" X 15/16" X 0.060", (If Required For Lever Operation), Washer; 17/32" X 15/16" X 0,060", Washer; (C) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16", Washer; (B: For 9650 (70*01- ) & 9750 (7001- )) 17/32" X 15/16" X 0.060", Washer; 17/32"X15/16"X0.06", Washer; 17/32"X15/16", Washer; (A: Use With Conversion From Niehoff To Motorola Alternator For 8450 Prior To Serial No. 0086) 17/32" X 15/16" X 0.060", Washer; (A: ( -Xxxxxx) 4650-0101; 4850-0073) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", (443, 444, 643 Corn Heads), Washer; 17/32" X 1" X .060", Washer; (E) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0,06", Washer; (E), Washer; (B) (C) 17/32" X 15/16" X 0.060", Washer; (A: Power Shift Transmission) 17/32" X 15/16" X 0.060", Washer; (A: ( -Xxxxxx) 4050-0060; 4250-0095; 4450-0171) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", Middle, Washer; 17/32" X 15/16" X 0.060" (1243), Washer, Washer; 17/32" X 15/16" X 0.060" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925-8 Used; 930-10 Used; And 930 Flex Arg-1 Used), Washer; (B) (C) (D) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Washer; 13.487 X 23.825 X 1.524 mm, Washer; 17/32" X 15/16" X 0.060" 17/32" X 15/16" X .060", Washer; (D), Washer; 17/32"X15/16"X.060", Washer; (A: Used In 5415 And 5715 Orchard Tractors) 17/32" X 15/16" X 0.060", Washer; 17/32"X15/16"X0.060", Washer; 17/32" X 15/16" X 0.060" (154"), Washer; (A: For 9650 ( -7000) & 9750 ( -7000)) 17/32" X 15/16" X 0.060", Washer; (D: (Xxxxxx- ) 7600-0027; 7700-0005; 7800-0004) 17/32" X 15/16" X 0.060", Washer; 060 X 17/32 X 15/16 Zn, Washer; (A) .060" X 17/32" X 15/16", Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 17/32" X 15/16" X 0.060", Washer; 0.060"X17/32"X15/16", Washer; 17/32" X 15/16" X 0.060" (A), Washer; (B) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", (3 Nominal), Washer; (A) 17/32" X 15/16" X 0.060", Washer; (A: Note; 9550 (7001- ) 9550sh (70**01- )) 17/32" X 15/16" X 0.060", Washer; .060" X 17/32" X 15/16" (Sub For 24h1864), Washer; 0.06" X 17/32" X 15/16", Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 17/32" X 15/16" X 0.060", Washer; X 17/32" X 15/16" X .060", Washer; (A) (B) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0,060" (Sub For 24h1786, Ap, Washer; 17/32" X 15/16" X .060", Washer; (A: Used In High Clearance Tractors Too) 17/32" X 15/16" X 0.060", Washer; (D) 17/32" X 15/16" X 0.060", Washer; 15/16"X17/32"X.060", Washer; (C) (D) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060" (A) (B), Washer; (Sub For Mg771710), Washer; 17/32" X 13/16" X 0.060"	1
AE***67	Link Chain; L = 67, Incl Key 15, Link Chain; L = 67, Incl Key 15 (P20351), Link Chain; Lgth = Incl Key 15, Link Chain; Main Drive	1

See all parts with full part numbers in Heavy Parts AI →

Feeder Finger Drive

John Deere : 338 - Baler : Feeder Finger Drive

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	3
03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	6
03***75	Bolt; 5/8"X3", Bolt; 5/8" X 3", Bolt; 5/8" X 3", (Sub For 03h2073)	1
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	1

See all parts with full part numbers in Heavy Parts AI →

Feeder Fingers

John Deere : 338 - Baler : Feeder Fingers

11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	1
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	8
14***12	Nut; (C) 3/4", Nut; 3/4", Slotted, Nut; 3/4" 3/4" Slotted, Nut; (312), Nut; (D) (E) 3/4", Nut; 3/4", Slotted, Unc, Nut; 3/4" (Offset Pull-Type), Nut; 19.050 mm (3/4") Slotted, Nut, Nut; 3/4", Nut; 3/4", Use On Yoke With 3/4" Shaft, Nut; 3/4" Slotted, Nut; (A) 3/4", Nut; 3/4" 3/4" (Slotted), Nut; 19.050 mm (3/4")	1
19***58	Cap Screw, Cap Screw; 3/8" X 3", (Dn-01), Cap Screw; 3/8" X 3", (Sae 8) Low, Cap Screw; 3/8" X 3", (Na-D), Cap Screw; (A) 3/8" X 3", Cap Screw; 3/8" X 3", (1201 And 1203), Cap Screw; 3/8" X 3", Cap Screw; 3/8" X 3" Low , (Sae 8), Cap Screw, Cap Screw; 3/8" X 3" (Sae 8) Low, Cap Screw; 3/8"X3", Cap Screw; 3/8"X3" (Sub For 19h1944), Cap Screw; 9.525 X 76.200 mm (3/8" X 3"), Cap Screw; 3/8" X 3" (Use With Motorola), Cap Screw; 3/8" X 3" Hs, Sae 8, Cap Screw; 3/8" X 3", (Ea-G, Ge-01), Cap Screw; 3/8" X 3" (A), Cap Screw; 3/8" X 3", Hs, Sae 8, Cap Screw; 3/8" X 3" Low, Cap Screw; 3/8" X 3", (Code 1202), Cap Screw; 3/8" X 3", Low, Cap Screw; 3/8" X 3", For R46414, Cap Screw; 3/8" X 3" (Hs, Sae 8) For R46414, Cap Screw; 3/8" X 3" 3/8" X 3", Cap Screw; 3/8" X 3", (Motorola), Cap Screw; 3/8" X 3", (Gn-01), Cap Screw; 3/8" X 3" (Sub For Re19h268), Cap Screw; 9.525 X 76.200 mm, (Sub For Re19h268), Cap Screw; 3/8" X 3", (Sae 8), Cap Screw; 3/8" X 3" (Sae 8), Cap Screw; 3/8" X 3", (6212), Cap Screw; 3/8" X 3", (Dh-01, Dh-02, Dn-01, Gn-01, Ha-D, Hc-D), Cap Screw; 3/8" X 3", (Code 2819), Cap Screw; 3/8" X 3", Code 6201, Cap Screw; 3/8" X 3" Hs, Sae 8, 3/8" X 3", Cap Screw; 3/8" X 3" Without Air Conditioning, Cap Screw; 3/8" X 3", Cap Screw; 3/8" X 3" (Hs, Sae 8), Cap Screw; Hs, Sae 8, 3/8" X 3", Cap Screw; 3/8"X3", For 3179dl001, Cap Screw; 3/8" X 3", (Sub For Mg280161), Cap Screw; 3/8"X3", For 3179dl016, Cap Screw; 9.525 X 76.200 mm, Cap Screw; 3/8" X 3" Hs, Sae 8, (B)	4

See all parts with full part numbers in Heavy Parts AI →

Feeder Support

John Deere : 338 - Baler : Feeder Support

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	0
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	2
03***72	Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 5/16" X 1/2", Bolt; (B) 5/16"X1/2", Bolt; 5/16" X 1/2", (3.7 M (12-Ft.), 9 Used Per Tooth Bar) (4.3 M (14-Ft.), 12 Used Per Tooth Bar) (4.8 M (16-Ft.), 12 Used Per Tooth Bar), Bolt; 5/16"X1/2", Bolt; 5/16" X 1/2", 9 Used, 3.7m (12 Ft); 12 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 5/16" X 1/2", Each Additional Tooth Bar, Bolt; 5/16" X 1/2", (Per Tooth Bar), Bolt; (Sub For Mg280616), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.), Bolt; 5/16" X 1/2" (215 And 216-1 Used; 218, 220, 222, And 224-2 Used; 230-4 Used), Bolt; 5/16" X 1/2" (Sub For 03h1607), Bolt; (C) 5/16" X 1/2", Bolt; (B) 5/16" X 1/2", Bolt; 5/16x1/2", Bolt, Bolt; (C) 5/16"X1/2", Bolt; 5/16" X 1/2" (915-1 Used; 918, 920, 922, 924 And 925- 2 Used; 930-4 Used), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7m (12-Ft.) (12 Used Per Tooth Bar, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; (A) 5/16" X 1/2", Bolt; X 5/16" X 1/2", Bolt; 5/16" X 1/2" (A), Bolt; 5/16" X 1/2", 9 Used Per Tooth Bar, 3.7 M (12-Ft.) 12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 5.0 M (16-Ft.)	0
11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	1

See all parts with full part numbers in Heavy Parts AI →

Flywheel

John Deere : 338 - Baler : Flywheel

14***75	Nut; 7/8", Slotted, Nut; 7/8", Use On Yoke With 7/8" Shaft, Nut; 7/8", Nut, Nut; (B) Lh, Nut; Lh, 7/8", Nut; L.H., Nut; 7/8" (Ref. 7/8") Lh, Nut; (F: Incld In Cb01488227 & Cb01488228 Tie Rod Groups) 7/8", Nut; 7/8" 7/8", Nut; 7/8" L.H., Nut; Sp, 7/8", Nut; 7/8", Slotted, L.H., Nut; 7/8" (A) (B), Nut; 7/8", L.H., Nut; 7/8", Unf, Nut; 7/8" Slotted, Titn To 250 Ft-Lb., Nut; (A: 8520 (02***33- )) 7/8", Nut; 7/8", For 610, Nut; 7/8", Unf,, Nut; 7/8" Slotted, Nut; 7/8", For 810, Nut; (B) 7/8", Nut; 7/8", Castellated, Nut; (A) 7/8", Slotted, Nut; 7/8", Slotted, Unf	1
21***41	Screw; 1/4" X 1/4"	3
AE***76	Flywheel, Flywheel; (Marked E39251), Flywheel; Incl Keys 5,6	1
BP***87	Bushing	1

See all parts with full part numbers in Heavy Parts AI →

Gear Case

John Deere : 338 - Baler : Gear Case

11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	1
15***53	Pipe Plug; 1/8" (Without Restriction Indicator), Pipe Plug; 1/8", (Less Power Take-Off), Pipe Plug; 1/8", Pipe Plug; 1/8" 1/8", Pipe Plug; (Sub For T26565), Pipe Plug; 1/8" (Air Cleaner Indicator Hole), Pipe Plug; (A) 1/8", Pipe Plug; 1/8", (For Shipping Only), Pipe Plug; 1/8", (Sub For T35599), Pipe Plug; 1/8" (Gasoline), Pipe Plug, Pipe Plug; Nla, Pipe Plug; 1/8" (Gear Case), Pipe Plug; (Sub For T35599)	1
15***11	Pipe Bushing; 1/8" (Sub For Mg87916), Pipe Bushing; 3/8", Pipe Bushing; Adapter, 3/8" X1/8", Pipe Bushing; (312), Pipe Bushing; Outside Hex., 3/8" X 1/8", (Use With Ae42758), Pipe Bushing; 1/8" X 3/8", Lgth= 16.256mm, Pipe Bushing; 1/8", Pipe Bushing; (A) 3/8" X 1/8", Pipe Bushing; Outside Hex., 3/8" X 1/8", Pipe Bushing; 90°, 1", Pipe Bushing; 1/8", Outside Hex. (Use With Ae42758), Pipe Bushing; Hex. Hd., 3/8" X 1/8", Pipe Bushing; 1/8", (A), Pipe Bushing; 1/8" 3/8" X 1/8" (A) (B), Pipe Bushing; (A), Pipe Bushing; 3/8" X 1/8", Hex. Hd., Pipe Bushing; 1/8", (Use With Ae42758), Pipe Bushing; 3/8" X 1/8" Outside Hexagon, Pipe Bushing; 1/8", Pipe Bushing; 1/8", (Front And Rear Axles), Pipe Bushing; 3/8" X 1/8", (For 4219dn-02 Engine), Pipe Bushing; 3/4" X 1/8", (Use With Ae42758), Pipe Bushing; 1/8" 3/8" X 1/8", Pipe Bushing; 3/8"X1/8", Pipe Bushing; 3/8" X 1/8", Pipe Bushing; 3.175 mm (1/8"), Pipe Bushing; (3/8 X 1-1/8 Pipe Thread), Pipe Bushing; Bushing, 1/8" X 3/8", Pipe Bushing	1
15***23	Pipe Plug; 3/8" 3/8"-18 Npt, Pipe Plug; 3/8" (Sub For 15h695), Pipe Plug; 3/8", Not Used This Application, Pipe Plug, Pipe Plug; 3/8", (Sub For Grn074), Pipe Plug; 3/8" (Sub For 15h255), Pipe Plug; Sq. Hd., 3/8" (Starting Aid Hole), Pipe Plug; Sq. Hd., 3/8", Pipe Plug; (F: (Xxxxxx- ) Serial No. 4050-00*59. 4250-0144; 4450-02**87) 3/8", Pipe Plug; 3/8", Pipe Plug; (D) 3/8", Pipe Plug; 3/8" (A) (B), Pipe Plug; 3/8" (8440), Pipe Plug; 3/8" (Without Starting Aid), Pipe Plug; 3/8", Pipe Plug; 9.525 mm, Pipe Plug; 3/8" (Dn-03), Pipe Plug; 3/8", Starting Aid Hole, Pipe Plug; 3/8", Sq. Hd., Pipe Plug; 9.525 mm (3/8") 3/8"-18npt, Para R113701, Pipe Plug; 9.525 mm (3/8") 3/8"-18npt, Para R109887, Pipe Plug; 3/8", (Without Starting Aid), Pipe Plug; (C: Code 1709 With Air Cleaner Mounting Pad) 3/8", Pipe Plug; 3/8", (Code 1708), Pipe Plug; 3/8", (Code 1709), Pipe Plug; 3/8", Necessary When Using Telescoping Tubes On Hitch, Pipe Plug; 3/8" 3/8"-18npt, Pipe Plug; (A) 3/8", Pipe Plug; 3/8"-16nc X 3/8"-16unc, 3/8"-16nc X 3/8"-24unf (For 14h774), Pipe Plug; 3/8"-18npt, (Use With R109887 And R113701), Pipe Plug; (A) 3/8", (Use With Ae41328), Pipe Plug; 3/8", (Starting Aid Hole), Pipe Plug; 3/8" (Dh-01, Dh-02), Pipe Plug; 3/8" Sq. Hd., 3/8", Pipe Plug; 3/8", (1708) Sq. Hd., 3/8", Pipe Plug; 3/8"-18npt, Pipe Plug; 3/8" (Kit Ah130542), Pipe Plug; (Without Starting Aid) Sq. Hd., 3/8", Pipe Plug; 3/8", Sq. H.D., Pipe Plug; 3/8" Sub For 15h695, Pipe Plug; (Kit Ah130542), Pipe Plug; (Sub For 15h255), Pipe Plug; 9.525 mm (3/8") 3/8"-18npt, Pipe Plug; 3/8" (Use With Ar93930)	2

See all parts with full part numbers in Heavy Parts AI →

Gear Support

John Deere : 338 - Baler : Gear Support

12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	4
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	7
24***28	Washer, Washer; 1-17/32" X 2-1/2" X 0.120" (Sub (4) 24h1228), Washer; 1-17/32" X 2-1/2" X 0.120", Washer; 1-17/32"X2-1/2"X.120", Washer; 1-17/32" X 2-1/2" X 0.120", (Kits Ar69585 And Ar73922), Washer; 1-17/32" X 2-1/2" X 0.120", Kit Ar69585 And Ar73922, Washer; 1-17/32" X 2-1/2" X 0.120", (28, 31, 36 And 41-Foot), Washer; 1-17/32" X 2-1/2" X 0.120", (For 28 And 31 Foot Machines)	0

See all parts with full part numbers in Heavy Parts AI →

Gripper And Shear Assembly (Wire Baler)

John Deere : 338 - Baler : Gripper And Shear Assembly (Wire Baler)

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	1
03***21	Bolt; 7/16"X3-1/4", Bolt; 7/16" X 3-1/4", Bolt; (A) 7/16" X 3-1/4", Bolt; 7/16" X 3-1/4" (Sub For 03h1499)	1
11***12	Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm	2
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	4

See all parts with full part numbers in Heavy Parts AI →

Hay Dogs

John Deere : 338 - Baler : Hay Dogs

11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	5
12***65	Washer; (A) 8.100 mm, (Battery Cable), Washer, Washer; Use W/ Az17516 - Az17518, Washer; 8 mm, B+, Washer; M8, (Sub For Ch11475), Washer; (Disk), Washer; 8.100 mm, Washer; 8 mm 8.100 mm, Washer; (Sub For 12h303), Washer; (B), Washer; (312), Washer; (Use With Az17518), Washer; (Not Used This Application), Washer; 8 mm, M8x25, Washer; 8 mm Use With T27860 And 14m7273, Washer; 8 1mm, Washer; (B) 8mm (Sub For 12m1625), Washer; 8 mm (Engine Marked -Jk1, -Jk1e, -Ejk1, -Ejk1e), Washer; 8 mm, 6203, Washer; 0.315", Washer; B10, Washer; (Sub For Ch11459) (Use With 3011df And 3014df), Washer; 8 mm (A), (B), Washer; (B: Dubuque (T0) Esn -89*59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; 8 mm (0.315") (1000 Rpm Only), Washer; (A: From Sr.No. 5103s-0162, 5203-0062, 5104/5204/5038d-0001.) 8 mm, Washer; (312) 11x21x2mm, Washer; 8,1mm, Washer; (B: Dubuque (T0) Esn 7767-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (A: Upto Sr.No.5103e-0054, 5103-0165, 5103s-0162, 5203-0062.) 8 mm, Washer; (A: Rice/Corn) 8 mm, Washer; (D: Dubuque (T0) Esn 7112-Xxxxxx) (E: Saran (Cd) Esn Xxxxxx-Xxxxxx) (F: Torreon (Pe) Esn Xxxxxx-Xxxxxx) 8 mm, Washer; 8m, Washer; (A: See Your Authorized Pump Repair Station For Internal Parts) (B: Dubuque (T0) Esn 7767-) (C: Saran (Cd) Esn -Xxxxxx) 8 mm, Lock Washer; 8 mm, (Sub For A590908), Washer; (A) (B) M8, Washer; (A: For Small Grain) 8 mm, Washer; 8 mm, (Use With Ar92109), Washer; (D: Dubuque (To) Esn -7111) (E: Saran (Cd) Esn -Xxxxxx) (F: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (B: Dubuque (T0) Esn 7096-8959) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm Black, Washer; 8 mm, (45 Used 12 Ft., 60 Used 15 Ft.), Washer; 8 mm (C), Washer; 8 mm (European), Washer; (B: Saran (Cd) Esn Xxxxxx-) 8 mm, Washer; B8, Washer; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) (D) 8 mm, Washer; 5/16", Washer; (C: Dubuque (T0) Esn 7132-) (D: Saran (Cd) Esn Xxxxxx-) (E: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (A: From Sr.No.5103e-0054, 5103-0165, 5103s-0162, 5203-0062, 5104/5204-0001, 5038d-0001.) 8 mm, Washer; (B: Dubuque (T0) Esn 7036-7314) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) (D: Torreon (Pe) Esn Xxxxxx-Xxxxxx) 8 mm, Washer; 8 mm 8 mm, Washer; 8 mm (Engine Marked -Jk2, -Jk2e, -Ejk2, -Ejk2e), Washer; (B: Dubuque (T0) Esn 7026-7139) 8 mm, Washer; (B: Dubuque (T0) Esn -7095) 8 mm, Washer; 8 mm Tk=8mm, Washer; (B: Dubuque (To) Esn 7096-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) (E: Dubuque (To) Esn -8959) 8 mm Black, Washer; 8 mm, (Sub For 12h303) 8-Row Wide R.H. Transmission, Washer; (B: Dubuque (T0) Esn 7140-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm (Sub For R89944), Washer; M8 (C) (D), Washer; (B: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (Sub For R53669), Washer; 8 mm, (Sub For (6) 12h303), Washer; 8 mm, (Use W/3009df, 3011df, 3014df Or 3015df) (4019df, 4020df), Washer; (B: Esn -7647) (C: Esn 7410 -7655) 8 mm, Washer; (A: For 9650 (6901-) & 9750 (6901-)) 8 mm, Washer; (R) 8 mm, Washer; 8.100 mm, (Use With Ar92109), Washer; 8 mm (A) (B) (C), Washer; 5/16", W/ 24h1136, Washer; 8 mm, (Sub For (9) 12h303), Washer; (B: Dubuque (T0) Esn 7315-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn All) 8 mm, Washer; (B: Dubuque (To) Esn 7140-) (C: Dubuque (To) Esn -8959) (D: Saran (Cd) Esn -Xxxxxx) (E: Torreon (Pe) Esn -Xxxxxx) 8 mm (Sub For R89944), Washer; 8 mm, (Sub For Ch11459) (Use With 3009df), Washer; 8 mm, 3101, 3106, Washer; (B: Dubuque (To) Esn 7059-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; 8 mm (B), Washer; 8 mm (Use With Re254952), Washer; 8, Washer; 8 mm, (Code 2912), Washer; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-0061.) 8 mm For Heavyduty Transmission (1), Washer; 8 mm, (Australia And New Zealand 8 Per), Washer; (B) 8 mm, Washer; 12mm, Lock Washer; 8 mm, Washer; (B: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; 8 mm, (Sub For 12h303) 12-Row Narrow R.H. Transmission, Washer; 8 mm, Belt, Washer; 8mm, Washer; (A) (B), Washer; 8 mm, (Use With Code 3103, 3105, 3106), Washer; 8 mm, (Sub For (12) 12h303), Washer; 8 mm 12m7065 Nla; Sub For A590908, Washer; (B: Dubuque (T0) Esn -8959) (C: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; 8 mm 8mm, Washer; (A: - Xxxxxx 457(- 3100) 557(- 3150) 457s(- 3100)) 8 mm (1000 Rpm), Washer; (C), Washer; (312) 8mm, Washer; (B: Dubuque (T0) Esn 7370-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm (Sub For R89944), Washer; (A: Included With An220402 Reservoir) 8 mm, Washer; 8 mm, (Not Pictured), Washer; (B: Dubuque(T0) Esn 7095-7369) 8 mm, Washer; (A: - Xxxxxx 467(- 3100) 567(- 3150) 467s(- 3100)) 8 mm (1000 Rmp), Washer; 8 mm (Sub For Er022856 Appl), Washer; (B: Dubuque (To) (7059-)) (C: Saran (Cd) (Xxxxxx -)) (D: Torreon (Pe) (Xxxxxx-)) 8 mm, Washer; 8 mm (Hs, Head Marked 10.9), Washer; 8 mm (15 Per Australia And New Zealand), Washer; 8 mm, (Use With 19m7964), Washer; (Sub For Ch11459) (Use With 4019df), Washer; 8 mm, M8, Washer; (B: Without Lateral Tilt) 8 mm, Washer; (A: Ord Kit Dq64098) 8 mm, Lock Washer; 8 mm, (Sub For Ffsb103370), Washer; (B: Dubuque (To) Esn -7111) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (B: Dubuque (T0) Esn 7315-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (A), Washer; (B: Esn -7647) (C: Esn 7410 -7655) 8 mm, Washer; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-0061.) 8 mm, Washer; (B: For Germany Only) 8 mm, Washer; 8mm (Sub For 12h303), Washer; (B: Dubuque (To) Esn -7058) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; 8 mm, (Use With 19m7162), Washer; 8 mm, (Code 1613), Washer; (A: For 9650 (-6900) & 9750 (-6900)) 8 mm, Washer; 8 mm, (Sub For 12h303), Washer; 8 mm, (Nlr), Washer; 5mm, Washer; 8 mm, (6 Used, 6 Bolt) (8 Used, 8 Bolt), Washer; 8 mm M8, Washer; (A) 8 mm, Washer; 8 mm, (Sub For Ch11475), Washer; 8 mm, (Df105), Washer; 8 mm (Hs=10.9), Washer; 8 mm, (Sub For (3) 12h303), Washer; 8 mm, Washer; (A: Note; 9550 (7001-) 9550sh (7001-)) 8 mm, Washer; (B: Dubuque (To) Esn 7112-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; 8 mm 0.319", Washer; (A: Mechanical Front Wheel Drive) 8 mm, Washer; 8 mm (Sub For A590908), Washer; (B: Dubuque (T0) Esn 7767-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (A) 8 mm, (Sub For 12h303), Washer; (A: With 540/540e Power Take-Off) 8 mm, Washer; 6mm, Washer; M8x20, Washer; 8mm (Sub For 12m1625), Washer; 8 mm Black, Washer; 8 mm (0.315"), Washer; 8 mm, (Sub For Ce18059), Washer; (B: Dubuque (To) Esn -7131) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (A) (S) 8 mm, Washer; (B: Dubuque (T0) Esn -7139) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (A: From Sr.No.5203-0062, 5104-0001, 5204-0001.) 8 mm, Washer; M8, Washer; (B) 0.315", Washer; (A: Upto Sr.No. 5103s-0161, 5203-0061.) 8 mm, Washer; (Sub For R89944), Washer; 8.100 mm, M8, Washer; 8 mm (Sub For Ch11475), Washer; 8 mm, (Sub 12m7065), Washer; (Adj. Strap And Shield To Alt. Screw), Washer; (Sub For Ch11459), Washer; 8 mm, (Sub 12m7056), Washer; (B: Dubuque (T0) Esn -7139) 8 mm, Washer; (A) (B) 8 mm, Washer; (B: Dubuque (T0) Esn 7112-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-0061.) 8 mm For Heavyduty Transmission, Washer; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) 8 mm (Sub For R89944), Washer; (B: Use With Ar93448) 8 mm M8, Washer; (B: Saran (Cd) Esn -Xxxxxx) 8 mm, Washer; (B: Dubuque (To) Esn 7132-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (B: Saran (Cd) Esn Xxx-) (C: Torreon (Pe) Esn Xxx-) 8 mm, Washer; 8 mm, (Not Included) (Df105), Washer; (B: Dubuque (T0) Esn 7813-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; 8 mm (5/16"), Washer; 8 mm, (Sub For 12m7008), Washer; (A) 8 mm, (1000 Rmp), Washer; 8 mm, (1000 Rpm), Washer; (B: Dubuque (T0) Esn -7139) 8 mm, Washer; (B) B8, Washer; (B: Dubuque (To) Esn -7131) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (S) (A) 8 mm, Washer; 8 mm (Use With Ae53101, At185951 And Ah165975), Washer; (B: Dubuque (T0) Esn 7140-8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm (Sub For R89944), Washer; 8 mm (A), Washer; 8 mm Sub For 12m7056, Washer; (A: From Sr.No.5103e-0054, 5103-0165, 5103s-0162.) 8 mm, Washer; 8 mm (0.315") (Sub For 12h303), Washer; (B: Dubuque (T0) Esn -7025) 8 mm, Washer; (B: Dubuque (To) Esn -8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (Hoe), Washer; (A: Saran (Cd) Esn Xxxxxx-) (B: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (Use With Ae53101, At185951 And Ah165975), Washer; (B: Dubuque (T0) Esn -8959) (C: Saran (Cd) Esn -Xxx) (D: Torreon (Pe) Esn -Xxx) 8 mm, Washer; (A: From Sr.No.5310s(0084-), 5410(0019-), 5610(0001-).) 8 mm, Washer; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) 8 mm, Washer; (A: Rice Version) 8 mm, Washer; 8 mm Use With Az17518, Washer; 8 mm B+, Washer; (B: Dubuque (T0) Esn -7111) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (Code 1611), Washer; (B) M8, Lock Washer; 8 mm, (Sub For Ffsb109185), Washer; (A: Optional For European Application.) 8 mm, Washer; 8 mm, (Used With Code 5701, 5702, 5703), Washer; (B: Dubuque (T0) Esn 7059-7314) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) 8 mm, Washer; (A: 2wd) 8 mm, Washer; (B: Dubuque (To) Esn -7058) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (B: Dubuque (T0) Esn -8959) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; (B) (C: Esn 7410 -7655) 8 mm, Washer; (B: Dubuque (To) Esn -7035) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 8 mm, Washer; M8, 8450 Tractor, Washer; 0.315", (Sub 12m7065), Washer; 8 mm, (Sub For 12h303) (Sub 12m7056), Washer; 8 X 14,8 X 2 mm, Washer; (Af), Washer; (D: Components Of Item Dq73362) 8 mm, Lock Washer; (Sub For Ffsb103370), Washer; 8 mm, For Re61095, Washer; (B: Dubuque (T0) Esn 7059-7314) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) (D: Torreon (Pe) Esn Xxxxxx-Xxxxxx) 8 mm, Lock Washer; 8 mm, (Sub For Ffsb112212), Lock Washer; 8 mm (0.315"), Washer; (B: Dubuque (To) Esn -70**95) 8 mm	3
19***05	Cap Screw; (A: - Xxxxxx 467( - 31*00) 567( - 3150) 467s( - 3100)) 5/16" X 1" (1000 Rpm), Cap Screw; 5/16" X 1", Cap Screw; 7.925 X 25.400 mm, Cap Screw; (For (4) 24h1243), Cap Screw; 5/16" X 1" Rh, Cap Screw; 5/16" X 1", (Use With P50677), Cap Screw; 5/16" X 1", Hs, Sae 8, Cap Screw; 5/16"X1", Cap Screw; 5/16" X 1" (Hs, Sae 8) (Sub For R132456), Cap Screw; 5/16" X 1", (Hs, Sae 8)(Gas), Cap Screw; (A: - Xxxxxx 457( - 3100) 557( - 3150) 457s( - 31*00)) 5/16" X 1" (1000 Rpm), Cap Screw; 5/16" X 1", (Sub For Ffsb114668), Cap Screw; 5/16" X 1" (Hs, Sae 8), Cap Screw, Cap Screw; 5/16" X 1", (Use With Alternator Shield), Cap Screw; 5/16" X 1" (Hs, Sae 8) (Sub For Aw24189), Cap Screw; 5/16" X 1", (With Alternator Shield), Cap Screw; 5/16" X 1", Included In Ae53225 Lower Paddle Auger Kit; See Kit On Auger, Cap Screw; (A), Cap Screw; 5/16" X 1", (Dh-03, Gh-01), Cap Screw; (A) 5/16" X 1", (1000 Rpm), Cap Screw; 5/16" X 1", (Motorola), Cap Screw; 7.925 X 25.400 mm (5/16" X 1"), Cap Screw; 5/16" X 1" (Sub For N167650, This Application), Cap Screw; 7.925 X 25.400 mm (5/16" X 1") (Hs, Sae 8)	3
24***41	Washer; X X 17/32" X 15/16" X .060", Washer; 17/32" X 15/16" X 0.060", (154"), Washer; 17/32" X 15/16" X 0.060", (If Required For Lever Operation), Washer; 17/32" X 15/16" X 0,060", Washer; (C) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16", Washer; (B: For 9650 (70*01- ) & 9750 (7001- )) 17/32" X 15/16" X 0.060", Washer; 17/32"X15/16"X0.06", Washer; 17/32"X15/16", Washer; (A: Use With Conversion From Niehoff To Motorola Alternator For 8450 Prior To Serial No. 0086) 17/32" X 15/16" X 0.060", Washer; (A: ( -Xxxxxx) 4650-0101; 4850-0073) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", (443, 444, 643 Corn Heads), Washer; 17/32" X 1" X .060", Washer; (E) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0,06", Washer; (E), Washer; (B) (C) 17/32" X 15/16" X 0.060", Washer; (A: Power Shift Transmission) 17/32" X 15/16" X 0.060", Washer; (A: ( -Xxxxxx) 4050-0060; 4250-0095; 4450-0171) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", Middle, Washer; 17/32" X 15/16" X 0.060" (1243), Washer, Washer; 17/32" X 15/16" X 0.060" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925-8 Used; 930-10 Used; And 930 Flex Arg-1 Used), Washer; (B) (C) (D) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Washer; 13.487 X 23.825 X 1.524 mm, Washer; 17/32" X 15/16" X 0.060" 17/32" X 15/16" X .060", Washer; (D), Washer; 17/32"X15/16"X.060", Washer; (A: Used In 5415 And 5715 Orchard Tractors) 17/32" X 15/16" X 0.060", Washer; 17/32"X15/16"X0.060", Washer; 17/32" X 15/16" X 0.060" (154"), Washer; (A: For 9650 ( -7000) & 9750 ( -7000)) 17/32" X 15/16" X 0.060", Washer; (D: (Xxxxxx- ) 7600-0027; 7700-0005; 7800-0004) 17/32" X 15/16" X 0.060", Washer; 060 X 17/32 X 15/16 Zn, Washer; (A) .060" X 17/32" X 15/16", Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 17/32" X 15/16" X 0.060", Washer; 0.060"X17/32"X15/16", Washer; 17/32" X 15/16" X 0.060" (A), Washer; (B) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060", (3 Nominal), Washer; (A) 17/32" X 15/16" X 0.060", Washer; (A: Note; 9550 (7001- ) 9550sh (70**01- )) 17/32" X 15/16" X 0.060", Washer; .060" X 17/32" X 15/16" (Sub For 24h1864), Washer; 0.06" X 17/32" X 15/16", Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 17/32" X 15/16" X 0.060", Washer; X 17/32" X 15/16" X .060", Washer; (A) (B) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0,060" (Sub For 24h1786, Ap, Washer; 17/32" X 15/16" X .060", Washer; (A: Used In High Clearance Tractors Too) 17/32" X 15/16" X 0.060", Washer; (D) 17/32" X 15/16" X 0.060", Washer; 15/16"X17/32"X.060", Washer; (C) (D) 17/32" X 15/16" X 0.060", Washer; 17/32" X 15/16" X 0.060" (A) (B), Washer; (Sub For Mg771710), Washer; 17/32" X 13/16" X 0.060"	0

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Bale Compression

John Deere : 338 - Baler : Hydraulic Bale Compression

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	0
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	2
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (Pickup Lift)

John Deere : 338 - Baler : Hydraulic Cylinder (Pickup Lift)

AE***06	Cylinder; Complete	1
AE***38	Seal Kit; (Use With Ah65911 Or Ae70806)	1
AH***11	Cylinder, Cylinder; Assembly, Incl Keys 1-9, Cylinder; Assembly, Cylinder; (Sub Ae70806)	1
AH***12	Kit, Kit; Incl Keys 3,5	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinders (Cessna) (Bale Compression)

John Deere : 338 - Baler : Hydraulic Cylinders (Cessna) (Bale Compression)

AE***96	Cylinder; Complete, Cylinder	2
BE***64	Complete Goods/Ship.; Hydraulic Bale Tension, Includes Parts On Additional Pages	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinders (John Deere) (Bale Compression)

John Deere : 338 - Baler : Hydraulic Cylinders (John Deere) (Bale Compression)

12***16	Lock Washer; 0.216", (Sub For Ffsb106649), Lock Washer; 5.486 mm (0.216") (Sub For Ffsb106649), Lock Washer; 0.216" No. 6, Lock Washer; 0.216", Lock Washer; No.12, Lock Washer; 5.486 mm (0.216"), Lock Washer; 0.216", Lock Washer; 0.216", (Sub For A3011r), Lock Washer; (Sub For Et11440), Lock Washer; No. 6, Lock Washer; 5.486 mm, Lock Washer; No. 12, Lock Washer	2
21***18	Screw; No.12 X 1/2", Screw; No.12x1/2", Screw; 0.216" X 1/2", Screw; No. 12 X 1/2", Screw; 0.216" X 1/2", (Used With Code 1405), Screw, Screw; 5.486 X 12.700 mm (0.216" X 1/2")	2
AE***69	Hydraulic Cylinder B	2
AE***74	Cylinder Head, Cylinder Head; (Includes L1661c), Cylinder Head; (Includes Plug)	2

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Pickup Lift

John Deere : 338 - Baler : Hydraulic Pickup Lift

03***94	Bolt; M10 X 40 (1092), Bolt; (A), Bolt; M10 X 40 (925 Flex Arg And 930 Flex Arg), Bolt; (D) M10 X 40, Bolt; (A) M10 X 40, Bolt; M10x40, Bolt; M10 X 40, (Not Used This Application), Bolt; (A: Windrower Option Only) M10 X 40, Bolt; M10 X 40 Flex Platforms, Bolt; M10 X 40, Bolt; M10 X 40 (Square Neck), Bolt; (Sub For 03m7152), Bolt; M10 X 40 (918, 920, 922, 925 And 930), Bolt; (A) (E) M10 X 40, Bolt; M10 X 40 (918, 920 Rigid, 920 Rice, 922 Rigid, 922 Rice, 925 Rigid, 925 Rice, 930 Rigid And 930 Rice), Bolt; M10 X 40 Europe, Bolt, Bolt; M10 X 40, Bolt; (E) M10 X 40, Bolt; M10 X 40 North America, Bolt; (A) (F) M10 X 40, Bolt; M10 X 40 (For Az104282)	1
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	1
14***26	Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"	2
14***74	Screw; M10, (Use With 19m7668), Screw; M10 108 Used ;14'(4.3 M), 123 Used ;16'(4.9 M), 143 Used; 18'(5.5 M), Screw; (A) M10, (Sub For Et11535), Screw; (D: 21" X 7" X 12" 16pr Tire) M10, Screw; (A) (B) (C) (D) M10, Screw; M10, 6-Row Wide, 8-Row Narrow, 8-Row Wide And 10-Row Narrow, Screw; 10mm, Screw; M10 Rockshaft Rows, Screw; (C: For 8-Row Narrow) M10, Screw; M10 (Para L113893), Screw; 10 M, Screw; (A: Viscous Drive Lock-Up) M10, Screw; (A: Used In 5415 Orchard And 5415hc Tractors Too) (B: Used In 5615hc Tractor Too) (C: Used In 5715hc And 5715 Orchard Tractors Too) M10, Screw; (B: Low Profile Cab) M10, Screw; M10, (Sub 19m7382), Screw; (Sub For Ch12390), Screw; M10, (Use With Re19187 Or Re42730), Screw; M10, (Sub For 14m7140, This Application), Screw; M10 Rh, Lh, Nut; M10, (Sub For 06*13), Screw; (A: For 4-Row) M10, Screw; M10, (Hs Sae 8), Screw; (D: Heavy Duty Gudgeon W/3" Pin) M10, Screw; M10 (C), Screw; M10 (Also Order 15h624), Screw; (C: 5625 ( -0072), 5725 ( -0013)) M10, Nut; (Sub For Ffsb107411), Nut; M10, Nut; (Sub For J231210), Screw; (A: 18 Used On 1550mm (61") Bucket; 24 Used On 1850mm (73") Bucket), Screw; (A: For Tractor With 3 Steps, On The Left And On The Right) M10, Screw; (A: For 8-Row Narrow) M10, Screw; M10, (Sub For 14m7274, This Application), Screw; (Alt. Shield And Alt. To Alt. Bracket), Screw; M10, (D) (E), Screw; M10, (Use With Re31694), Screw; M10 Used On Rigid Euro For 918, 920, 922 And 925, Screw; M10 M10 (For L113893), Nut; (Sub For J950010), Screw; (A: Note; 9550 (7001- ) 9550sh (7001- )) M10, Screw; M10, (Use With Re19187), Screw; M10, (10), Screw; (B: Not On Bearing) M10, Screw; M10 Used With Deflector Only, Nut; M10, (Sub For Ffsb107411), Screw; 10x1,5mm, Screw; (A: Only For Germany) M10, Screw; M10, (Code 3108, 3109 And 3130), Screw; (A: Only For 1.8 M Pickup) M10, Screw; (C: ( -Xxxxxx) 7610-0059 ; 7710-0056 ; 7810-0068) M10, Screw; (B: Straddle Mount/Isolated Open Operator Station) M10, Screw; M10 (A), Screw; Battery Terminal, Screw; (B: 5615: 0021- And 5715: 0120-) M10, Screw; M10 (Use With Kv26113), Screw; (B: For 6-Row Narrow, 6-Row 70 cm And 6-Row Wide) M10, Screw; M10 Rear, Screw; (A: Viscous Drive Lockup) M10, Screw; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) M10, Screw; M10 (Sub For 4637 Or 0313), Screw; M8, Screw; M10 M10 X 1, 5, Screw; (A: Fourth Step Option) M10, Screw; (C: For 12-Row Narrow (22-Inch)) M10, Screw; M10 (Battery Terminal), Screw; (A) M10, (Sub For Ch18389), Screw; (A: With Extra Hydraulic Oil Reservoir) M10, Screw; (A: Cis Version) M10 (8310, 8410), Screw; M10 Lh, Rh, Screw; M10 (Sub For Er022119 Appl), Screw; M10 (For Al110920), Screw; M10, Code 3111, 3114, 3140 And 3142, Screw; (K) M10, Screw; (B), Screw; (A: (-Xxxxxx) Sgb 0057; Rg -0081) M10, Screw; M10 L.H., Screw; M10 9000, Screw; (E) M10, (Use With Re19187), Screw; M10 (132", -6874; 154", -6809), Screw; M10 Sub For 14m7039 And 14m7060, Screw; (D: (Xxx- ) 8560-0001;8760-0001;8960-0001) M10, Screw; M10 (Use With Re198656), Screw; M10 (Heavy Duty), Screw; (A: With Net Wrapping) M10, Screw; M10 (Use (2) For 2 Function Icv, (3) For 3 Function Icv), Screw; M10 (Sub For R73639), Screw; M10 (Sub For Er022118 Appl), Screw; (B: Use With Ar93448) M10, Screw; (C: For 8-Row Narrow, 8-Row 70 cm And 8-Row Wide) M10, Screw; M10, (2 Per Tine), Screw; (A: With Net Coveredge) M10, Screw; M10 (Sub For J231210), Screw; (C: For 12-Row Narrow) M10, Screw; M10, M18x1,5, Screw; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M10, Screw; (C: For 12-Row Narrow And 12-Row, 70 cm) M10, Screw; M10 (10), Screw; M10, When Using Dry Fertilizer Only, Screw; (H: 21" X 7" X 12" 16pr Tire) M10, Screw; (A: Cx - 5 Bolt Pattern) (B: Hx - 4 Bolt Pattern) (C: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; M10 (493, 1290 And 1291), Screw; (H: M10, Used With Deflector Only) M10, Screw; M10, (Delco-Remy), Screw; M10 (For Dc212852), Nut; M10, (Sub For Ffsb106074) (Sub For 14m7294), Screw; M10 Sub For J950010, Screw; (A: (-Xxxxxx) (Sgb) 7600-0057; 7700-0089; 7800-0114) (C: (-Xxxxxx) (Rg) 7600-0081; 7700-0133; 7800-0145) M10, Screw; M10 (D), Screw; M10 Not On Bearing, Screw; (D) (E) M10, Screw; (A: Parts Not Used On Balers With Bale Trak Plus Monitor) M10, Screw; (A: Option) M10, Screw; M10, (Delco Remy), Screw; M10 Lh, Screw; M10 X 1.5, Screw; M10 (For Dc22679) (Sub For 14h846), Screw; M10 (For Al119373), Screw; (C: For Electronic Wrapping Control Plus) M10, Screw; M10, (For Rows Five And Eight), Screw; M10 (Not Illustrated), Screw, Screw; (D: Used With Deflector Only) M10, Screw; M10 (Hi-Crop), Screw; (C: 5303 (0008- ), 5403 (0043- ), 5503 (0001- ).) M10, Screw; M10, (Sub Cj17261), Screw; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M10, Screw; M10 (Use With Delco-Remy), Screw; M10 6-Row, 36-, 38- And 40-In.; 8-Row, 30-In.; 8-Row, 70 cm; 8-Row, 36-, 38- And 40-In.; 10-Row, 30-In., Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, This Application) Copper, Cuivre, Kupper, Rame, Cobre, Koppar, Screw; M10 (B) (C) (D), Screw; (A: With Creeper Transmission) M10, Screw; M10 9 Used On 335, 11 Used On 375, Screw; (B: For 6-Row Narrow, 6-Row 70 cm, 6-Row Wide And 8-Row Wide Skip-Row) M10, Screw; M10 (Sub For 4463), Screw; M10, (Saran Cd), Screw; (B: With Cab) M10 (Sub For Er022119 Appl), Screw; (B: Low Profile) M10, Screw; M10x1,5, Screw; M10 (For Rows Five And Eight), Screw; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M10, Screw; M10, (Use With Code 3103, 3105, 3106), Screw; M10 (Sub For 0703), Screw; (A: For Tractor With 2 Steps, On The Left And On The Right) M10, Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, R127288, This Application) Copper, Cuivre, Kupper, Rame, Cobre, Koppar, Screw; (A: For North America Only) M10, Screw; (C), Screw; (B: Oos Tractors) M10, Screw; M10, (Battery Terminal), Screw; M10, (Sub For Ch13637), Screw; (C: Viscous Drive Lock-Up) M10, Screw; (B: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; (A) 10mm, Screw; M10 (Sub For 14h1076), Screw; (B: With Creeper Transmission) M10, Screw; (A: Fuel Tank (30.6 Gallon )) M10, Screw; (A: For 8-Row Wide Skip-Row) M10, Screw; M10, (Sub For (2) Mg508083) Hex, Nut; M10, (Use With T127169), Screw; (A: For 1, 81 Meter Pickup) M10, Screw; (Sub For R140624), Screw; M10x1.5, Screw; M10 (For Cc22210), Screw; (C: W/O Hitch) M10, Screw; M10 Sub For 14m7148, Screw; (C: 5303 ( -0007), 5403 ( -0042).) M10, Screw; (A: With Hydraulic Cab Suspension (Hcs)) M10, Screw; (A: Only For 2.0 M Hiflow Pickup) M10, Screw; M10 (For Dc54470), Screw; (A) (B) M10, Screw; (A: Without Cab) M10 (Sub For Er022119 Appl), Screw; M10 (Sub For Er022118, Appl), Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R127288, R129609, This Application) Copper, Cuivre, Kupfer, Rame, Cobre, Koppar, Screw; (B: Hx - 4 Bolt Pattern) (E: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) M10 (With Extendible Dipperstick), Screw; M10, In Air Duct, Screw; (C) M10, Screw; (B: For 8-Row Wide) M10, Screw; (A) M10, M10, Nut; M10, (Torque 23lb.Ft), Screw; M10, (Sub For W33464), Screw; (A: Only For 2, 0 M Hiflow Pickup) M10, Screw; (A: For 25 Knives Only) M10, Screw; M10 M10, Screw; (A: With Work Light (Sg2)) M10, Screw; (A: With 12v, 110ah Battery) M10, Screw; (A: Required For Field Conversion To Diverter Valve On Independent Marker System) M10, Screw; (Sub For Ch13637), Screw; M10 (Sub For 0908), Screw; M10 (Use With (2) Kv22510), Screw; M10 Hs=10, Screw; M10 (Saran Cd), Screw; (Sub For T111619), Screw; M10, (Sub For (3) Mg508083), Screw; M10, (5420, 5440), Screw; M10, (Sub For Ch12390), Screw; (A), Screw; (A: Also For Tractors W/O Front Loader From Serial No. Xxxxxx) M10, Screw; M10, 3101, 3106, Screw; M10, Used With Deflector Only, Screw; M10 (Sub For J950010), Nut; M10, (Sub For J950010), Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) M10, Nut; (Sub For Ffsb106074) (Sub For 14m7294), Screw; M10, (Sub For Ch18389), Screw; (A: For 6-Row Narrow And 6-Row Wide) M10, Screw; (B) M10, Screw; M10 Jds118, Screw; (B: (Xxxxxx- ) 8560-0043; 8760-0019; 8960-0061) M10, Screw; (B: 2 Used Per Tine) M10, Nut; (Sub For M520010), Screw; M10 (10 Used 435; 14 Used 535), Nut, Screw; M10, (Use (2) For 2 Function Icv, (3) For 3 Function Icv), Screw; M10 (Sub For J590010), Screw; M10 (Sub For Th0432902 ) (Sub For 0402), Screw; M10, Up, Screw; (A: With Air Trailer Brake System) M10, Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, This Application) Copper, Cuivre, Kupfer, Rame, Cobre, Koppar, Screw; M10 (For Dc54470, Dc212852), Screw; M10 (Use With Re173973), Screw; (A: For 14 Knives Only) M10, Screw; (A: No Longer Required) M10, Screw; M10 (2 Per Tine), Screw; (A: ( -Xxxxxx) 8560-0042; 8760-0018; 8960-0060) M10, Screw; M 10, Screw; M10, For Dry Fertilizer, Screw; (A: From Sr.No 5310s(0084- ), 5410 (0019- ), 5610 (00**01- ).) M10, Screw; M10 (M10), Screw; M10, Screw; (A) M10, Screw; M10 (For L113893), Screw; (A: With Autopowr Transmission) M10, Screw; (B: Viscous Drive Lock Up) M10, Screw; (B: For 8-Row Narrow And 8-Row Wide) M10, Screw; M10, M10, Screw; (A: For 4-Row And 6-Row Wide Skip-Row) M10	3

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Pump

John Deere : 338 - Baler : Hydraulic Pump

14***52	Wing Nut; (B) 1/4", Wing Nut; 1/4", Wing, Wing Nut; 1/4", Wing Nut; (A) 1/4", Wing Nut, Wing Nut; 1/4" Wing, Wing Nut; 1/4", (U.S. Only)	1
15***66	Pipe Plug; 3/8" (Floor Plate) (Optional), Pipe Plug; 3/8", (Use With Re31299) (Without Turbocharger), Pipe Plug; 3/8", (Sub For Ch15002), Pipe Plug, Pipe Plug; Sq. Hd., 3/8", Pipe Plug; 3/8", (Use With R89790), Pipe Plug; (A) 3/8", (One Not Used W/ Re20889), Pipe Plug; 3/8" 3/8''-18nptf, Threads With Pre-Applied Sealant, Filets Enduits De Produit D'Etancheite, Mit Dichtmittel, Con Materiale Di Tenuta, Con Sellador, Med Taetningsmedel, Pipe Plug; 3/8", (Sub For R47395), Pipe Plug, Pipe Plug; 3/8" Front, Pipe Plug; 3/8" 3/8"-18 Npt, Pipe Plug; 3/8", Hex Ctsk., 3/4", Pipe Plug; 3/8" (One Not Used With Re20889), Pipe Plug; 3/8" (Use With Ar54556), Pipe Plug; 3/8", (Use With At16133), Pipe Plug; 3/8" 3/8"-18npt (Ord 15h695) With Square Head, Pipe Plug; 3/8" (Dn-03), Pipe Plug; 3/8" (4640, 4840), Pipe Plug; 3/8", Pipe Plug; 3/8" 3/8"-18npt Or Ord 15h695 = With Square Head, Pipe Plug; 3/8" (Bottom Of Intake Manifold, Pipe Plug; 3/8", Pipe Plug; (Use With Re31299) 3/8" (Without Turbocharger), Pipe Plug; (Bottom Of Intake Manifold), Pipe Plug; 9.525 mm (3/8"), Pipe Plug; 3/8", (Sub For Mg508010 Or 15h563), Pipe Plug; 3/8", (Not Used Appl), Pipe Plug; (A) 3/8", (Use 1 With R43851 Or R63285), Pipe Plug; (D) 3/8", Pipe Plug; 3/8", (Use With At206990), Pipe Plug; 3/8", Sq. Hd., Pipe Plug; (A) 3/8", Pipe Plug; 3/8", (Use With R108970), Pipe Plug; 3/8", (Sub For 15h563), Pipe Plug; 3/8" 3/8"-18npt, Pipe Plug; 3/8" (Sub For P45809), Pipe Plug; 3/8" (Front), Pipe Plug; 3/8", (Sub For P45809), Pipe Plug; 3/8", (Use With Ar54556), Pipe Plug; 3/8" 3/8"-18npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Bottom Of Intake Manifold), Pipe Plug; 3/8", Without Turbocharger, Pipe Plug; 3/8", (Front), Pipe Plug; (Use With R108970), Pipe Plug; 3/8" (Not Used Appl), Pipe Plug; 3/8" 3/8"-18 Npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Use With R104592, R134429 And 15h690), Pipe Plug; 3/8", (Use With At210378), Pipe Plug; 3/8" (Use With R89790), Pipe Plug; 3/8", (Less Starting Aid), Pipe Plug; 3/8", (Front), Pipe Plug; 3/8", Hex. Ctsk., Pipe Plug; (A: Threads With Pre-Applied Sealant) 3/8" 3/8''-18 Nptf	1
19***13	Cap Screw; 5/16" X 5/8", (Use With 12h303 And 14h785), Cap Screw; 5/16" X 5/8" (220-5 Used; 222 And 224-10 Used), Cap Screw; 5/16" X5/8", Cap Screw; (C) (E) 5/16" X 5/8", Front, Cap Screw; 5/16" X 5/8" (Dn-03, Gn-01, Ln-01, Nb-D, Nb-G, Nb-L), Cap Screw; 1/2" X 2", Cap Screw; 5/16"X8", Cap Screw; (A) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Sub N10212, This Application), Cap Screw; (A: 4-Post Roll-Gard) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Use With N10213), Cap Screw; 5/16" X 5/8" (Use With An281247), Cap Screw; 5/16" X 5/8", (Ea-G, Ge-01), Cap Screw; 5/16"X5/8", Cap Screw; 5/16" X 5/8", (4 Used Sound-Gard Body), Cap Screw; 5/16" X 5/8" (A), Cap Screw; 5/16" X 5/8" (Nlr), Cap Screw; X 5/16" X 5/8", Cap Screw; 5/16"X5/8" (For Z10945, Z11386), Cap Screw; 5/16" X 5/8", Nla, Cap Screw; 5/16" X 5/8", (Use With R40930, R40940 Or R49550), Cap Screw; (B: W/O Cab) 5/16" X 5/8" Oos, Cap Screw; 5/16" X 5/8", (Sub For Mg88859), Cap Screw; 5/16" X 5/8", Cowl To Control Support, Cap Screw; 5/16" X 5/8", No Longer Required, Cap Screw; 5/16" X 5/8" (Sub For 19h1948), Cap Screw; 5/16" X 5/8" (Use With 12h303 And 14h785), Cap Screw; (C) (E) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", (Use (3) With R26078), Cap Screw; 7.925 X 15.875 mm (5/16" X 5/8"), Cap Screw; 5/16" X 5/8", (Lower) 6 Roller Pump, Cap Screw; 5/16" X 5/8", (Sub N10212, This Application), Cap Screw; 5/16" X 5/8", (Dn-01, Gn-01), Cap Screw; 7.925 X 15.875 mm, Cap Screw; (E: Use With Smooth Crown Wheel) 5/16" X 5/8", Cap Screw; (B) 5/16" X 5/8", Cap Screw; 5/16"X5/8" (For Z11386), Cap Screw; (C) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", (2903), Cap Screw; (F) 5/16" X 5/8", Lower, Cap Screw; 5/16 X 5/8", Cap Screw; 5/16" X 5/8" (Use With 14h785), Cap Screw; (V) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Sub For 19h2284), Cap Screw; 5/16"X9/16", Cap Screw; 5/16" X 5/8", (9108,9121), Cap Screw; 5/16" X 5/8", (3 Used Rs, Ut), Cap Screw; 5/16" X 5/8", Cap Screw; 5/16"X.518", Cap Screw; 5/16" X 5/8", For C1232n Only, Cap Screw; 5/16"X.578", Cap Screw; (D) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Rg), Cap Screw; 5/16"X3/8", Cap Screw; (A) R.Bosch,5/16"X5/8", Cap Screw; (B) 5/16"X5/8", Cap Screw, Cap Screw; 5/16" X 5/8" (No Longer Required), Cap Screw; 5/16" X 5/8", 6 Roller Pump Only, Cap Screw; 5/16" X 5/8" 5/16" X 5/8", Cap Screw; (A) 5/16"X5/8", Cap Screw; 5/16" X 5/8", (Use With R71529 Or R71531), Cap Screw; 5/16" X 5/8", Lower, 6 Roller Pump Only, Cap Screw; 5/16" X 5/8", (Nlr), Cap Screw; 5/16" X 5/8", (No Longer Required), Cap Screw; 5/16" X 5/8", (4 Used, Sound-Gard Body), Cap Screw; (B: 4-Post Roll-Gard) 5/16" X 5/8", Cap Screw; (A: Contained In Ar87569) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", Germany, Cap Screw; 5/16" X 5/8" (Sub N10212) This Application, Cap Screw; 5/16" X 5/8", (Ut), Cap Screw; 5/16" X 5/8" (D), Cap Screw; X 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (C)	3
19***33	Cap Screw; 1/2" X 2-1/4", Cap Screw; 1/4" X 2-1/4", (Use With M88861), Cap Screw; 1/4"X2-1/4", Cap Screw; 1/4" X 2-1/4", Cap Screw; (A) 1/4" X 2-1/4", Cap Screw; 1/4" X 2-1/4", (Use With M89921), Cap Screw; 6.350 X 57.150 mm (1/4" X 2-1/4"), Cap Screw; (D) 1/4" X 2-1/4", Cap Screw; 1/4" X 2-1/4" (F), Cap Screw; 1/4" X 2-1/4" (B), Cap Screw; 1/4" X 2-1/4" (Includes Aa5607r), Cap Screw; 1/2"X2-1/4", Cap Screw	2

See all parts with full part numbers in Heavy Parts AI →

Hydraulic System

John Deere : 338 - Baler : Hydraulic System

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	2
11***92	Cotter Pin; 3.200 X 40 mm, (Sub For 11h234), Cotter Pin; 3.200 X 40 mm, Cotter Pin; 3.200 X 40 mm, Cotter Pin; 3.200 X 40 mm, (Power Axle), Cotter Pin; 3x40mm (Sub For 11h224), Cotter Pin; 3.200 X 40 mm, (Power Rear Wheel Drive), Cotter Pin	1
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	4

See all parts with full part numbers in Heavy Parts AI →

Jack Stand

John Deere : 338 - Baler : Jack Stand

AA***92	Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00*26; 7700-0020; 7800-01**50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650	1
AF***19	Jack; (Sub For Ae35376), Jack, Jack; (Sub For Ae35376, This Application)	1
N1***29	Pin; (Sub For Ac14488), Pin; Surtir Con Ap39650, Pin; (Sub For N133193, This Application), Pin; (Sub For Wp321502b91), Pin; 45 Ft, 53 Ft And 61 Ft, Pin; Furnish With Ap39650, Pin; 2-Unit Hitch, Pin, Pin; (Sub For Kk5866b) (This Application Only), Pin; (Sub For E54915), Pin; (Sub For Kk5866b, This Application), Pin; (Sub For Kk5866b), Pin; (Sub For E54915) Jack, Pin; (Sub For Kk5866b) (750) (This Application Only), Pin; (Use With An103655) (Sub For Kk5866b This Application Only), Pin; (Sub For Kk5866b) (700) (This Application Only), Pin; Jack Attaching	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame

John Deere : 338 - Baler : Main Frame

03***99	Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)	2
03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	4
19***27	Cap Screw; 7/8" X 4-3/4", Cap Screw; 7/8" X 4-3/4" (4 Used, 327; 2 Used, 337)	0
19***98	Cap Screw; 1/2" X 1-1/4", Cap Screw; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/2" X 1-1/4", Cap Screw; (A: See Key 33) 1/2" X 1-1/4", Cap Screw; (A: 12' Main Frame) (B: 2nd Rank) 1/2" X 1-1/4", Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -69*00)) 1/2" X 1-1/4", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1527), Cap Screw; (E: 1.8 M (72 In.)(6 Ft.)) 1/2" X 1-1/4", Cap Screw; 1/2"X1-3/8", Cap Screw; 1/2"X1-1/4" (For Al39202), Cap Screw; (B) 1/2" X 1-1/4", (Use With 1 372 mm (54") Extension), Cap Screw; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" X 1-1/4" (Sub For (8) 19h1815), Cap Screw; 1/2" X 1-1/4", (5 Used L.H.) (5 Used R.H.), Cap Screw; 1/2" X 1-3/8", Cap Screw; 1/2" X 1-1/4" Hs, Sae 8, 1/2" X 1 1/4", Cap Screw; 1/2" X 1-1/4" 1/2" X 1 1/4", Cap Screw; 1/2" X 1-1/4" 8 Ft., Cap Screw; 1/2" X 1-1/4" Brazil Only, Cap Screw; 1/2"X1-1/4" (Ord Al56097), Cap Screw; 1/2" X 1-1/4" (Dh-01, Dh-02 And Gh-02), Cap Screw; (A) 1/2"X1-1/4", Cap Screw; 1/2" X 1-1/4", (Sub For Ffsb109249), Cap Screw; Hs, Sae 8, 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" 6 Ft., Cap Screw; 1/2" X 1 1/4", Cap Screw, Cap Screw; 1/2" X 1-1/4" On Pressure Port, Cap Screw; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" X 1-1/4" (Sub For (9) 19h1815), Cap Screw; 1/2" X 1-1/4" (Use With 24h1226, N280839, N280837 Or N280838, N280906 And K40014), Cap Screw; 1/2" X 1-1/4" 7 Ft., Cap Screw; 1/2" X 1-1/4", Hs, Sae 8, Full Thread, (Sub For 19h3299), Cap Screw; 1/2" X 1-1/4", Sae 8, Cap Screw; 1/2" X 1-1/4" 1/2 Unc-2a X 1 1/4 A17f Zn, Cap Screw; 12.700 X 31.750 mm, Cap Screw; 1/2" X 1-1/4" Use With Sae 2 And 3 Flywheel Hsg, Cap Screw; 1/2" X 1-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/4, Cap Screw; 1/2" X 1-1/4" (A) (B), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Hs, Sae 8, Cap Screw; 1/2" X 1-1/4" (Flex), Cap Screw; (A) 1/2" X 1-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/4" (Use With 1 372 mm (54") Extension) (B), Cap Screw; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (Use With Sae 2 Or 3 Flywheel Housing), Cap Screw; 1/2" X 1-1/4", (With Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/4", (Torque 103 Lb-Ft), Cap Screw; 1/2" X 1-1/4", (Hs, Sae 8), Cap Screw; 1/2"X1-1/4", Cap Screw; (D: 3 M (120 In.)(10 Ft.)) 1/2" X 1-1/4" (Sub For (10) 19h1815), Cap Screw; 1/2" X 1-1/4", (Use With Sae, 2 Or 3 Flywheel Housing), Cap Screw; (A: 12" Main Frame) (B: 2nd Rank) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" 9 Ft., Cap Screw; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" X 1-1/4" (Sub For (7) 19h1815), Cap Screw; 1/2" X 1-1/4" Hs, Sae 8, Cap Screw; 12.700 X 31.750 mm, Torque To 63 Lb-Ft (85 N-M), Cap Screw; 1/2" X 1-1/4" 10 Ft.	7

See all parts with full part numbers in Heavy Parts AI →

Measuring Wheel

John Deere : 338 - Baler : Measuring Wheel

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***11	Nut; (Sub For T11682), Nut; 5/16", Nut; 7.925 mm (5/16"), Nut; 5/16", (Use With Am50789), Nut; 5/16" (Use With Scraper), Nut; 5/16" (Sub P47210, This Application), Nut; (A: ( -Xxxxxx) 8560-00*00; 8760-0000; 8960-00**00) 5/16", Nut; 5/16" (Spring To Control Support Screw), Nut; 5/16" Hex Jam, Nut; 5/16", (Use With Scraper), Nut; 5/16", Jam, Nut; (A) 5/16", Nut; (B) 5/16", Nut; (B) 5/16", (Or, Ut), Nut; 5/16", (Sub For T11682), Nut, Nut; 5/16", (Used With Am50789 Only), Nut; 5/16" Jam, Nut	1
19***64	Cap Screw; 5/16" X 3/4", (Without Alternator Shield), Cap Screw; (A) 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (Less Spout-Trak), Cap Screw; 5/16" X 3/4" (United Kingdom Only), Cap Screw, Cap Screw; 5/16" X 3/4" (With Mechanical Front Wheel Drive), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (3.7 M (12-Ft.) Platform Less Conditioner), Cap Screw; 5/16" X 3/4" (Hs, Sae 8), Cap Screw; 5/16" X 3/4", Cap Screw; 5/16" X 3/4" (30"), Cap Screw; 5/16" X 3/4", (Use Without Alternator Shield), Cap Screw; 5/16" X 3/4" Hs, Sae 8, Cap Screw; 5/16" X 3/4", Hs, Sae 8, Cap Screw; 5/16"X3/4", Cap Screw; 5/16" X 3/4", (Sub 19h1900), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (Sub For 19h1112), Cap Screw; 5/16" X 3/4", (Hs, Sae 8), Cap Screw; (A: For Engine (Cd6068hz001)) 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (Sae 8), Cap Screw; (A) (B) 5/16" X 3/4", Cap Screw; 5/16" X 3/4" (4 Used, 30") (10 Used, 38"), Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Cap Screw; 5/16" X 3/4" (Nla), Cap Screw; 5/16" X 3/4" (Sub E33233), Cap Screw; 7.925 X 19.050 mm, Cap Screw; 5/16" X 3/4", (Code 2912), Cap Screw; 5/16" X 3/4" (16 Used, 30") (15 Used, 38"), Cap Screw; 5/16" X 3/4" (Less Spout-Trak), Cap Screw; 5/16" X 3/4", Cap Screw; 5/16" X 3/4", (3-Rrc), Cap Screw; 5/16" X 3/4", (Use With R108741), Cap Screw; 5/16" X 3/4" (Hs, Sae 8) (Sub For Et10723), Cap Screw; (D) 5/16" X 3/4" (Hs, Sae 8), Cap Screw; 5/16" X 3/4" (Sae 8)	2
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	1

See all parts with full part numbers in Heavy Parts AI →

Multi-Luber Pump And Harness

John Deere : 338 - Baler : Multi-Luber Pump And Harness

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	0
03***72	Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 5/16" X 1/2", Bolt; (B) 5/16"X1/2", Bolt; 5/16" X 1/2", (3.7 M (12-Ft.), 9 Used Per Tooth Bar) (4.3 M (14-Ft.), 12 Used Per Tooth Bar) (4.8 M (16-Ft.), 12 Used Per Tooth Bar), Bolt; 5/16"X1/2", Bolt; 5/16" X 1/2", 9 Used, 3.7m (12 Ft); 12 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 5/16" X 1/2", Each Additional Tooth Bar, Bolt; 5/16" X 1/2", (Per Tooth Bar), Bolt; (Sub For Mg280616), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.), Bolt; 5/16" X 1/2" (215 And 216-1 Used; 218, 220, 222, And 224-2 Used; 230-4 Used), Bolt; 5/16" X 1/2" (Sub For 03h1607), Bolt; (C) 5/16" X 1/2", Bolt; (B) 5/16" X 1/2", Bolt; 5/16x1/2", Bolt, Bolt; (C) 5/16"X1/2", Bolt; 5/16" X 1/2" (915-1 Used; 918, 920, 922, 924 And 925- 2 Used; 930-4 Used), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7m (12-Ft.) (12 Used Per Tooth Bar, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; (A) 5/16" X 1/2", Bolt; X 5/16" X 1/2", Bolt; 5/16" X 1/2" (A), Bolt; 5/16" X 1/2", 9 Used Per Tooth Bar, 3.7 M (12-Ft.) 12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 5.0 M (16-Ft.)	2
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	0
19***48	Bolt; 1/4" X 3/4", Right-Hand, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle - 2 Used) (Bucket - 54 Used), Bolt; (B) 1/4" X 3/4", Bolt; 1/4" X 3/4", Bolt; 1/4" X 3/4", Hs, Sae 8, Bolt; (A: Install In 1 Select. Control Valve) 1/4" X 3/4", Bolt; 1/4" X 3/4" (To Transmission Sight Tube Bracket), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Bolt; 1/4" X 3/4", (Europe), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 66 Used), Bolt; 1/4" X 3/4", Not Used This Application, Cap Screw; 1/4" X 3/4", Bolt; 1/4" X 3/4", (84 Used For 714, 714a; 98 Used For 716, 716a), Bolt; 1/4"X3/4", Bolt; 1/4' X 3/4", Bolt; 1/4" X 3/4", (Use With Gd1072), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; (A) 1/4" X 3/4", Bolt; 1/4" X 3/4", Europe, Bolt; 1/4" X 3/4" (Use With 14h786 And 24h1286), Bolt; 1/4" X 3/4", (Sub For Mg88573), Bolt; 1/4" X 3/4" 1/4 X 3/4, Bolt; 1/4" X 3/4" (Sub For 19h1919, This Application), Bolt; 1/4" X 3/4" (A), (B), Bolt; 1/4" X 3/4", Sweden Only, Bolt; 1/4" X 3/4", (Sub For Hmx03107), Bolt; 1/4" X 3/4", (Use With 12h302 And 14h786), Bolt; (A: 6076trw07 Only) 1/4" X 3/4", Bolt; 1/4" X 3/4", 7000 Flex-Fold And 7100 Integral Planters Only, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle-2 Used; Bucket-96 Used), Bolt; 1/4" X 3/4" (Use With 14h786), Bolt; 1/4" X 3/4", Herbicide Only, Bolt; 1/4" X 3/4", (Not Used W/E55662), Bolt; 1/4"X3/4, (Use With Ar91662, Re30685), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used), Bolt; 1/4"X3/4 (For Ar91662, Re30685), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4" (911), Bolt; 1/4" X 3/4" (A), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle), Cap Screw, Bolt; (A: ( -Xxxxxx) 8560-00*03; 8760-0051; 8960-00**14) 1/4" X 3/4", Bolt; (Use With Pt17843 Windowpane), Bolt; 1/4" X 3/4" Amber, Bolt; 1/4" X 3/4", (4402,4403), Bolt; 1/4" X 3/4", Amber, Bolt; (C) 1/4" X 3/4", Bolt; 1/4" X 3/4", 28" Rows Only, Bolt, Bolt; 1/4" X 3/4" (Sub For At216052), Bolt; 1/4" X 3/4", Germany And Italy, Bolt; 6.350 X 19.050 mm, Bolt; 1/4" X 3/4", (4408,4409), Bolt; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4" X 3/4", Bolt; (A) 1/4"X3/4", Bolt; 1/4" X 3/4", Small Hopper, Bolt; X 1/4" X 3/4", Bolt; 1/4" X 3/4" 1/4" X 0.75" (Sub For R138749), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle), Bolt; 1/4" X 3/4" (Europe), Bolt; 1/4" X 3/4", (56 Used For 714, 714a; 64 Used For 716, 716a), Bolt; 1/4" X 3/4", (Code 1637), Bolt; 1/4" X 3/4" (Not Illustrated), Cap Screw; 6.350 X 19.050 mm, Bolt; (A) R.Bosch,1/4"X3/4", Bolt; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4" X 3/4", Bolt; 1/4" X 3/4", (4402-4403), Bolt; 1/4" X 3/4" 1/4 X 3/4", Bolt; (A) 6.350 X 19.050 mm (1/4" X 3/4"), Cap Screw; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Bolt; 1/4" X 3/4" (4408-4409), Bolt; 1/4" X 3/4", ((3) Less Cab) ((2) Cab), Bolt; 1/4" X 3/4" For Steel Cleaning Paddles, Bolt; 1/4" X 3/4", ((3) Used Less Cab, (2) Used With Cab), Bolt; (C) (D) 1/4" X 3/4", Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Bolt; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4" (For Az100822), Bolt; 1/4" X 3/4" (8630), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 96 Used), Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used)	2

See all parts with full part numbers in Heavy Parts AI →

Multi-Luber Reservoir

John Deere : 338 - Baler : Multi-Luber Reservoir

14***18	Nut; 3/8", Nut; 5/16" (Sub For E12372), Nut; 5/16", Nut; 5/16", (Sub For Mg280967) Square, Nut; 5/16", Square	1
AE***29	Bracket; X, Bracket	1
AN***11	Cover; Incl Keys 1, Cover, Cover; X Assembly, Incl Key 1, Cover; Incl Key 3, Cover; Incl Key 1	1
BE***37	Complete Goods/Ship.; Nfs, Order Thru Complete Goods, Conversion To Add Multi-Lub, Includes Parts On Additional Pages, Complete Goods/Ship.; Nfs, Order Thru Complete Goods, Conversion To Add Multi-Lube, Includes Parts Marked (A), And Parts On Additional Pages	1

See all parts with full part numbers in Heavy Parts AI →

Needle Lift

John Deere : 338 - Baler : Needle Lift

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	3
03***09	Bolt; 3/8"X3-1/4", Bolt; 3/8" X 3-1/4", Rd. Hd., Bolt; 3/8" X 3-1/4", Bolt, Bolt; 9.525 X 82.550 mm (3/8" X 3-1/4")	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	6
19***36	Cap Screw; 5/16" X 2" (Sub For E51473) (Twine) Do Not Sub 19h1736 To Anything Else. 19h1736 Is Used In Shear Application And Cannot Sub To Higher Strength Screws., Cap Screw; 5/16" X 2", Cap Screw; 5/16" X 2", (Twine) Do Not Sub 19h1736 To Anything Else. 19h1736 Is Used In Shear Application And Cannot Sub To Higher Strength Screws. (Sub For E51473)	1

See all parts with full part numbers in Heavy Parts AI →

Needle Lift Shaft (Twine Baler)

John Deere : 338 - Baler : Needle Lift Shaft (Twine Baler)

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	2
03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	2
19***03	Bolt; (Sub For J021235), Bolt; 12x35mm, Cap Screw; (Sub For J021235), Bolt; (A: Power Shift Transmission) M12 X 35, Bolt; (A: Syncshuttle Transmission - 5420: Sn 44*43-, 5520: Sn 4504-) M12 X 35 (Hs=10.9), Bolt; M12 X 35 (Use With R186579), Bolt; (4019), Bolt; M12 X 35 (Hs=10.9), Cap Screw; M12 X 35, (Sub For Ffsb109213), Bolt; M12 X 35 Hs, 10.9, M8 X 20, Bolt; M12 X 35 (A), Bolt; M12 X 35 (Sub For J011235), Bolt; M12 X 35 (Use With R108598), Bolt, Bolt; M12 X 35 (Sub For Er125585 Appl), Bolt; M12 X 35 M12x35, (Hs=10.9), Bolt; (Sub For J011235), Bolt; M12 X 35 (10.9), Cap Screw; M12 X 35, Bolt; M12 X 35 M12 X 35 (10.9), Cap Screw; M12 X 35, (With Air Conditioning), Bolt; M12x35, Bolt; M12 X 35 (Sub For 19m7171 Appl), Bolt; M12 X 35 Torque To 80 Lb-Ft(110 N-M) Using Never Sieze On Threads, Bolt; M12 X 35, (10.9), Bolt; Packg 2, Bolt; M12 X 35 (Sub For Er123844 Appl), Cap Screw; M12 X 35, (Without Air Conditioning), Bolt; M12 X 35 (10 9), Bolt; M12 X 35 (9240 Nla), Bolt; (Sub For 4385) (Sub For J901235), Bolt; M12 X 35 (Hs=10.9, Bolt; M12 X 35 (10,9), Bolt; (Sub For J931235), Bolt; M12 X 35 (Sub For 4309), Bolt; M12 X 35 (Sub For J901235), Bolt; M12 X 35, M12x35, Bolt; M12 X 35 Fi, Bolt; M12 X 35, (Hs, Head Marked 10.9), Bolt; M12 X 35 (Hs 10.9), Bolt; (Sub For 4385), Bolt; M12 X 35 (Sub For J921235, J931235 Or At153819), Bolt; (A: Also For Tractors W/O Front Loader From Serial No. Xxxxxx) M12 X 35 (10.9), Cap Screw; M12 X 35, (Rear), Bolt; M12 X 35 Hs 10.9, Cap Screw; M12 X 35, (Sub For Ffsb103477), Bolt; M12 X 35, Bolt; (A: (Xxxxxx-) 8100t-0025; 8200t-0040; 8300t-0035; 8400t-0089) M12 X 35, Bolt; M12 X 35 (Sub For J921235), Bolt; (A: Syncshuttle Transmission - 5220: Sn -4229, 5320: Sn -4372) M12 X 35 (Hs=10.9), Bolt; M12 X 35 (Sub For J271235), Bolt; (C: Hi-Clearance) M12 X 35, Bolt; M12 X 35, (Sub For Ch13463), Cap Screw; (Sub For J011235), Bolt; M12 X 35 (Use With R213133), Cap Screw; M12 X 35, (At127270 Not Available For Service), Bolt; M12 X 35 M12 X 35, Bolt; M12 X 35, Torque To 80 Lb-Ft (110 N-M), Bolt; M12 X 35, 10.5x21x2mm, Bolt; M12 X 35, (Sub For R66938), Bolt; M12 X 35 Hs=10.9, Bolt; M12 X 35 (Hs, Head Marked 10.9), Cap Screw; M12 X 35, (Sub For J901235), Cap Screw; M12 X 35, (Torque 54ft. Lb 73mm), Cap Screw; (Sub For 4309), Bolt; (B: For Fuel Tank Al154855, Al156537) M12 X 35 (10.9), Bolt; M12 X 35 (10.9)mm, Bolt; (A: With Selectable Power Take-Off (540/540e/100)) M12 X 35, Bolt; M12 X 35 (Hs, Head Marked 10.9, Bolt; M12x35 (10.9), Bolt; M12 X 35 M12x35 (10.9), Bolt; (A) M12 X 35, Bolt; (A: Syncshuttle Transmission - 5420: Sn -4442, 5520: Sn -45**03) M12 X 35 (Hs=10.9), Bolt; (B: For Fuel Tank Al78358) M12 X 35 (10.9), Cap Screw; M12 X 35, (Sub For Ffsb107128)	2
24***12	Washer; 1-13/32" X 2 X .030", Washer; .030" X 1-13/32" X 2", Washer; 1-13/32" X 2" X 0.032", Washer; 35.712 X 50.800 X 0.813 mm (1-13/32" X 2" X 0.032"), Washer; Washer, 1-13/32" X 2" X .030", Washer; 1-13/32" X 2" X .030", Washer; 1-13/32"X2"X.030", Washer; 1-13/32" X 2" X 0.032" 1-5/32" X 1-3/4" X 0.024", Washer; (A) 1-13/32" X 2" X 0.032", Washer; 1-13/32" X 2" X 0.030", Washer; 1-13/32" X 2" X .036"	0

See all parts with full part numbers in Heavy Parts AI →

Needle Lift Shaft (Wire Baler)

John Deere : 338 - Baler : Needle Lift Shaft (Wire Baler)

11***12	Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm	2
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	5
12***93	U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16"	1
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	1

See all parts with full part numbers in Heavy Parts AI →

Needle, Frame And Guards

John Deere : 338 - Baler : Needle, Frame And Guards

03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	2
03***82	Bolt; 12.700 X 95.250 mm (1/2" X 3-3/4"), Bolt; 1/2" X 3-3/4", Bolt; 12.700 X 95.250 mm (1/2" X 3-3/4") (1253a)	2
11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2

See all parts with full part numbers in Heavy Parts AI →

Non Text Decals

John Deere : 338 - Baler : Non Text Decals

A8***30	Label, Label; Max Transport Speed 32, Label; (C: Max Transport Speed), Label; (Max.Transport Speed), Label; (D: Text Free)	1
CC***59	Label; Lh, Label, Label; Rh, Label; (A: Only For 50 Km/H), Label; Lh, Rh, Label; (A: Only For Japan)	1
CC***58	Label; (B: Only For Pickup 14 Knifes), Label; (540r/Min), Label; 540 Rpm, Label	1
E6***87	Decals; Lh, Decals, Decals; Lh, Rh, Decals; (D: For Multicrop Machines) Rh, Decals; (Grease), Decals; (A: With Net Coveredge), Decals; (A: For North America (French) Only) (B: For North America (English) Only), Decals; Rh, Decals; (A: With Net Wrapping), Decals; Caution, No Longer Available, Decals; Powershaft Lube Arrow, Decals; Grease, Decals; Chain Lube Arrow, Decals; Grease Locator, Decals; (C: For Silage Special Machines) Rh	1

See all parts with full part numbers in Heavy Parts AI →

Pickup Lift Crank And Drive Shields

John Deere : 338 - Baler : Pickup Lift Crank And Drive Shields

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	6
11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	1
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	4
19***20	Cap Screw; 5/16"X1/2" (For Ar71938), Cap Screw; 5/16" X 1/2", (Sub For Aw12765), Cap Screw; 5/16" X 1/2", (444 And 643), Cap Screw; (A), Cap Screw; 5/16"-18 Nc X 1/2", Cap Screw; 5/16" X 1-1/2", Cap Screw; 5/16"X1/2" (For Ar64567, Ar87885), Cap Screw; 5/16" X 1/2" (6 Used 3rd) (8 Used 4th), Cap Screw; 5/16" X 1/2" (Hs, Sae 8), Cap Screw; 5/16" X 1/2" (5 Used Dual) (4 Used Triple), Cap Screw; (B: (Xxxxxx- ) Tractor Serial No. 8450-00*01; 8650-0001) 5/16" X 1/2" (4 Used Dual) (6 Used Triple) (8 Used Quad), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 5/16" X 1/2", Cap Screw; 7.925 X 12.700 mm, Cap Screw; (A: Hitch) 5/16" X 1/2", Cap Screw; 5/16" X 1/2" Use With Double Rib Wheel, Cap Screw; 5/16" X 1/2", (Sub For 19h2038), Cap Screw; 5/16"X1/2", Cap Screw; 5/16"X1/2" (For Ar64567), Cap Screw; 5/16" X 1/2", (45 Used 12 Ft., 60 Used 15 Ft.), Cap Screw; 5/16" X 1/2" (A), Cap Screw; 5/16" X 1/2" (With Lock Washer), Cap Screw, Cap Screw; 5/16" X 1/2" (6 Used Triple) (8 Used Quad), Cap Screw; (Sub For Aw12765) (Use With 12m7032), Cap Screw; 5/16" X 1/2" R.H. Front, Cap Screw; 5/16" X 1/2", Cap Screw; 5/16" X 1/2" Fuel Drain, Cap Screw; 5/16" X 1/2", (Used With At79254 Cover), Cap Screw; 5/16" X 1/2", Cap Screw; 5/16" X 1/2", Cowl To Control Support, Cap Screw; (F: Use With Double Rib Wheel) 5/16" X 1/2", Cap Screw; 5/16" X 1/2", W/ 24m7055 & T35699, Cap Screw; (A) (B) 5/16" X 1/2", Cap Screw; 5/16" X 1/2" (For Ar78885), Cap Screw; 5/16"-18 Unc X1/2", Cap Screw; 5/16" X 1/2", (Use With 12h303 And 14h785), Cap Screw; 7.925 X 12.700 mm (5/16" X 1/2"), Cap Screw; 5/16" X 1/2" (Use With 14h785), Cap Screw; 5/16" X 1/2", (Sub For E44141) (Sub Gwxd172), Cap Screw; (B) 5/16" X 1/2", (Ut), Cap Screw; 5/16" X 1/2", (Nla), Cap Screw; (B) 5/16" X 1/2", Cap Screw; 5/16" X 1/2" (2 Used, Regular; 4 Used, Special), Cap Screw; 5/16" X 1/2" (For Ar64567), Cap Screw; (A) 5/16" X 1/2", Cap Screw; 5/16" X 1/2" (For Ar87885)	3

See all parts with full part numbers in Heavy Parts AI →

Pickup Cylinder

John Deere : 338 - Baler : Pickup Cylinder

03***91	Part Missing In Wise; M10 X 25, (Thru Unused Holes In Floor Sheets), Part Missing In Wise; M10 X 25 (Rigid), Part Missing In Wise; (A: With Net Coveredge) (B: Without Net Coveredge) (C: Only For 2, 0 M Rotoflow Or Maxicut Pickup) M10 X 25, Part Missing In Wise; (B: Without Net Coveredge) M10 X 25, Part Missing In Wise; (A: For 14 Knives Only) M10 X 25, Part Missing In Wise; M10 X 25 M10 X 25 (8.8), Part Missing In Wise; (A: Only For 1.8 M Pickup) M10 X 25, Part Missing In Wise; M10 X 25 (Use With Al71215), Part Missing In Wise; M10 X 25 (Sub For E92364, 03m7017), Part Missing In Wise; (A: For Commandcenter) M10 X 25, Part Missing In Wise; M10 X 25 (For Dc56765) (Sub For 03m7017), Part Missing In Wise; (A: For 25 Knives Only) M10 X 25, Part Missing In Wise; Ar, M10 X 25, Part Missing In Wise; M10 X 25 (For Cc52567), Part Missing In Wise; (C: Regular) M10 X 25, Part Missing In Wise; M10 X 25 R.H. (930), Part Missing In Wise; M10 X 25 (A), Part Missing In Wise; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M10 X 25, Part Missing In Wise; (A: Only For 2.0 M Rotoflow Or Maxicut Pickup) M10 X 25, Part Missing In Wise; (A: With Net Coveredge) (B: Without Net Coveredge) (C: Only For 2.0 M Rotoflow Or Maxicut Pickup) M10 X 25, Part Missing In Wise; (A: For Greenstar Gs1300 Display Module) (B: For Greenstar Gs1800 Display Module) M10 X 25, Part Missing In Wise; (A: With Net Coveredge) (B: Without Net Coveredge) M10 X 25, Part Missing In Wise; (E: With Hi-Crop Option) M10 X 25 (Use With Re177694), Part Missing In Wise, Part Missing In Wise; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M10 X 25, Part Missing In Wise; M10 X 25 (60), Part Missing In Wise; M10 X 25 (Square Neck), (Use With Al71216 Or Al159606), Part Missing In Wise; 10x25mm (Sub For 03m7088), Part Missing In Wise; (Sub For 03m7017), Part Missing In Wise; (A: For Impeller Machine) M10 X 25, Part Missing In Wise; (A: Starting From Series Number 625 (06*44-), 630 (06*34-)) M10 X 25, Part Missing In Wise; M10 X 25 (918 Rigid), Part Missing In Wise; M10 X 25 (594 - 8 Used; 694 - 10 Used; 893, 894 And 1092 - 14 Used), Part Missing In Wise; M10 X 25 (494, 694, 893, 894 And 1092), Part Missing In Wise; M10 X 25 Rh, Part Missing In Wise; M10 X 25 R.H. (918, 920, 922, 925), Part Missing In Wise; (B) M10x25, Part Missing In Wise; 10x25mm, Part Missing In Wise; M10 X 25 Removed, This Application Only, Part Missing In Wise; M10x25, Part Missing In Wise; M10 X 25 L.H., Part Missing In Wise; (C) M10 X 25, Part Missing In Wise; M10 X 25 All Except (693), Part Missing In Wise; (A), Part Missing In Wise; M10 X 25 Round Head, Part Missing In Wise; (B: Flex) M10 X 25, Part Missing In Wise; (A) M10x25, Part Missing In Wise; M10 X 25 Rd. Hd., Part Missing In Wise; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r,, 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) M10 X 25, Part Missing In Wise; (A) M10 X 25, Part Missing In Wise; M10 X 25 (8.8), Part Missing In Wise; M10 X 25 (913-14 Used; 915-16 Used; 918-20 Used; 920 -22 Used; 922-25 Used; 925-28 Used; And 930 -34 Used), Part Missing In Wise; (B: Straddle Mount) M10 X 25 (Square Neck), Part Missing In Wise; M10 X 25 M10x1.5x25-8.8 Jds137, Part Missing In Wise; M10 X 25 Lh, Part Missing In Wise; (A: For Msl Only) M10 X 25, Part Missing In Wise; (A: W/O Hold Downs) M10 X 25, Part Missing In Wise; M10 X 25 Use With Cast Tension Arm Pivot, Part Missing In Wise; (Sub For E92364, 03m7017), Part Missing In Wise; M10 X 25 M12x25, Part Missing In Wise; M10 X 25 (Square Neck), (Use With Al71215), Part Missing In Wise; (A: Only For 2, 0 M Hiflow Pickup) M10 X 25, Part Missing In Wise; M10 X 25, Round Head, Part Missing In Wise; M10 X 25 M10x1.5x25-8.8-Jds137, Part Missing In Wise; M10 X 35, Part Missing In Wise; (A: Incld In Re255894 Display Bracket Assembly Kit) M10 X 25, Part Missing In Wise; 10x25mm, (Sub For 03m7088), Part Missing In Wise; M10 X 25 R.H., Part Missing In Wise; M10 X 25, (Used On 592 And 592e), Part Missing In Wise; M10 X 25, (Thru Unused Holes In Floor Sheet), Part Missing In Wise; (A: For 5e Series Tractors) M10 X 25, Part Missing In Wise; (B: With Greenstar Display) M10 X 25, Part Missing In Wise; M10 X 25 (Use With Al71216 Or Al159606), Part Missing In Wise; (A: W/0 Hold Downs) M10 X 25, Part Missing In Wise; M10 X 25 (Thru Unused Holes In Floor Sheet), Part Missing In Wise; (A: Only For 2.0 M Hiflow Pickup) M10 X 25, Part Missing In Wise; M10 X 25 Lh, Rh, Part Missing In Wise; (A: Only For 2, 0 M Rotoflow Or Maxicut Pickup) M10 X 25, Part Missing In Wise; M10 X 25, Part Missing In Wise; M10 X 25 Carriage, Part Missing In Wise; 10 X 25mm, Part Missing In Wise; M10 X 25 (Square Neck), Part Missing In Wise; Lh, Part Missing In Wise; M10 X 25 M10 X 25, Part Missing In Wise; M10 X 25 (913-14 Used; 915-16 Used; 918-20 Used; 920 And 925 Flex Arg-22 Used; 922-25 Used; 925-28 Used; And 930 And 930 Flex Arg-34 Used), Part Missing In Wise; M10x25mm, Part Missing In Wise; M10 X 25 Low, Part Missing In Wise; M10 X 25 (Use With Al71216 Or Al71217), Part Missing In Wise; M10 X 25 (Sub For 03m7017)	0
03***92	Bolt; M10 X 30 (F), Bolt; (A: Only For 2.0 M Rotoflow Or Maxicut Pickup) M10 X 30, Bolt; (B: For Pickups With Auger Fingers) M10 X 30, Bolt; (B) M10 X 30, Bolt; M10 X 30 (493 - 6 Used; 594 - 8 Used; 693 - 10 Used; 1092 - 18 Used), Bolt; M10 X 30, Rear Bearings, Bolt; (A: Incld In Re255894 Display Bracket Assembly Kit) M10 X 30, Bolt; (Sub For E92363), Bolt; M10 X 30 Lh, Rh, Bolt; M10 X 30 Rear, Bolt; M10 X 30 (Hs, Head Marked 10.9), Bolt; (A) M10 X 30, Bolt; M10 X 30 North America, Bolt; M10 X 30 Rigid Platforms, Bolt; M10 X 30 Europe, Bolt; (A: Cab With 42.3 Gallon Fuel Tank) M10 X 30, Bolt; M10 X 30 (Use With E93472), Bolt; 10x1,5x30mm, Bolt; M10 X 30 Brace, Bolt; M10 X 30, (Fender), Bolt; (A) M10x30, Bolt; (A: With Net Wrapping) M10 X 30, Bolt; M10 X 30 M10x30, Bolt; (D: Heavy Duty Gudgeon W/3" Pin) M10 X 30, Bolt; (A: For France Only) M10 X 30, Bolt; (B: With Greenstar Display) M10 X 30, Bolt; M10 X 30, Bolt, Bolt; M10 X 30 (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925, 925 Flex Arg-8 Used; 930 And 930 Flex Arg-10 Used), Bolt; (A: (Xxxxxx-) 4055-01*43; 4255-0195; 4455-02**89) M10 X 30, Bolt; M10 X 30 M10 X 30, Bolt; M10 X 30, Lh, Bolt; M10 X 30 (Sub For E92373), Bolt; M10 X 30 (Sub For E92363), Bolt; M10 X 30 Lh, Bolt; M10 X 30, (Used On 492 And 592), Bolt; (A: Sekura Cab - 3 Cylinder Tractors) M10 X 30, Bolt; M10 X 30 (493, 594, 693, 1290, 1291 And 1293), Bolt; M10 X 30, Up, Bolt; M10 X 30 (W/ 14m7296), Bolt; (B) M10x30, Bolt; M10 X 30 Intermediate Position Lh, Bolt; M10 X 30 (918, 920, 922, 925 And 930), Bolt; M10 X 30 (Fender), Bolt; M10 X 30 (693), Bolt; M10 X 30 Rockshaft Rows, Bolt; M10 X 30 M10 X 20, Bolt; M10x30, Bolt; M10 X 30 (Use With E92888), Bolt; M10 X 30 (Use With R255897), Bolt; (A: Only For 2, 0 M Rotoflow Or Maxicut Pickup) M10 X 30, Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10 X 30, Bolt; M10 X 30 Rear Bearings, Bolt; M10 X 30, (692e), Bolt; (A: With Net Coveredge) M10 X 30, Bolt; (Use With L114292), Bolt; M10 X 30 (With Airflow), Bolt; M10 X 30 (A), Bolt; M10 X 30 (Square Neck)	3
03***07	Bolt; M10 X 25 (B) (C) (D), Bolt; M10 X 25 (Hs, Head Marked 10.9), Bolt; M10 X 25 (Hs, Head Marked 10.9) (Square Neck), Bolt; M10 X 25, Bolt; M10 X 25, Used With Converging Wheels, Bolt; M10 X 25, Access Door, Bolt; M10 X 25 (Hs, Head Marked 10.9) (Diesel), Bolt; M10 X 25 (Hs, Head Marked 10.9) Front Deflector, Bolt; M10 X 25, (18 Used, 430; 22 Used, 530), Bolt; M10 X 25, (3 Used, 430; 4 Used, 530), Bolt; M10 X 25, 3 Used 456; 4 Used 556, Bolt; M10 X 25 (3 Used, 435; 4 Used, 535), Bolt; M10 X 25 Bottom Hole Of Belt Guide R.H. Side, Bolt; M10 X 25 North America, Bolt; M10 X 25, 3 Used 466; 4 Used 566, Bolt; M10 X 25 Used With Converging Wheels, Bolt, Bolt; M10 X 25 (Sub For 03m7191), Bolt; M10 X 25, 456 Silage Special, Bolt; M10 X 25 Europe, Bolt; M10 X 25, (44 Used, 327; 78 Used, 337), Bolt; M10 X 25 3 Used On 335, 4 Used On 375, Bolt; M10 X 25 457 Silage Special, Bolt; (A) (B) (C) (D) M10 X 25, Bolt; M10 X 25 9 Used On 335, 11 Used On 375, Bolt; M10 X 25 (10 Used 435; 14 Used 535)	0
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	0

See all parts with full part numbers in Heavy Parts AI →

Pickup Drive

John Deere : 338 - Baler : Pickup Drive

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	6
03***31	Bolt; X 5/8" X 3-1/2", Bolt; 5/8" X 3-1/2", Bolt; 5/8"X3-1/2"	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	3
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2

See all parts with full part numbers in Heavy Parts AI →

Pickup Frame And Strippers

John Deere : 338 - Baler : Pickup Frame And Strippers

03***83	Bolt; M8 X 16 M8 X 1.25 X 16, Bolt; M8 X 16 Spanish, Bolt; M8 X 16 M8, Bolt; M8 X 16 (38 Used, 435; 50 Used, 535), Bolt; M8 X 16 L.H., Bolt; (A: 9550 (69*01- ) 9550sh (9601- )) M8 X 16, Bolt; M8 X 16, (7000 Series With 1.07 M (3.5 Ft) Harness), Bolt; M8 X 16 (Includes Z24604), Bolt; (B: With Rotor-Type Pickup (1000 Rpm Drive)) M8 X 16, Bolt; M8 X 16 (38-4 Ft) (50-5 Ft), Bolt; M8 X 16, (Use With E91222 And Ae55203), Bolt; M8 X 16 (To Plug L.H. Twine Box Holes), Bolt; M8 X 16 Without/Windshield, Bolt; (A: Straddle Mount) M8 X 16 (Use With R186016), Bolt; M8 X 16 (2 Used On L.H. 435)(4 Used On 535), Bolt; M8 X 16 (Sub For 19m8163), Bolt; M8 X 16 M8x16, Bolt; (A: For 9650 (6901- ) & 9750 (6901- )) M8 X 16, Bolt; M8 X 16 Sub For 03m7390, Bolt; (A: Not With Pneumatic Brakes) M8 X 16, Bolt; (A: 9550 ( -6900) 9550sh ( -6900)) M8 X 16, Bolt; M8 X 16 60 Used 14'(4.3 M) & 16'(4.9 M), 75 Used 18' (5.5 M), Bolt; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M8 X 16 (38 Used 335; 50 Used 375), Bolt; M8, Bolt; M8 X 16, Bolt; (A: 9550 (6901- ) 9550sh (6901- )) M8 X 16, Bolt; (A: Only For North America And Japan) M8 X 16, Bolt; (B) M8 X 16 (For Dc55155), Bolt; M8x16, Bolt; M8 X 16, (2 Used, 430) (4 Used, 530), Bolt; M8 X 16 (Europe), Bolt; M8 X 16 (Square Neck), Bolt; M8 X 16 (913 - 2 Used; 915 - 4 Used; 918 - 6 Used; 920, 922, 925, 930 - 8 Used), Bolt; M8 X 16 (7000 Series With 1.07 M (3.5 Ft) Harness), Bolt; M8 X 16, M8 X 16, Bolt; M8 X 16 (Export), Bolt; M8 X 16 (38 Used-430;50 Used-530), Bolt; M8x10, Bolt; M8 X 16 (915-1 Used; 918, 920, 922 And 925- 2 Used; 930-4 Used), Bolt; (A: For Vineyard Tractor Version Only) M8 X 16, Bolt; M8 X 16 (Sub For 03m7188), Bolt; (A: Rn Version Only) M8 X 16, Bolt; M8 X 16 M8 X 16, Bolt; M8 X 1.25 X 16, Bolt; M8 X 16 (Nlr), Bolt; (B: Xxxxxx- 446(1364) 546(1320)) M8 X 16, Bolt, Bolt; M8 X 16 Front, Bolt; (A: -Xxxxxx (9550, -6900)(9550sh, -6900)) M8 X 16, Bolt; (B: Isolated Open Operator Station) (C: With Cab) M8 X 16 (Use With R180259), Bolt; (A: For 9650 ( -6900) & 9750 ( -6900)) M8 X 16, Bolt; (A: For (6901- ) & 9750 (6901- )) M8 X 16, Bolt; (B: For Silage Special Machine Only) M8 X 16, Bolt; (A: For 9650 ( -6900) & 9750 ( -6900)) M8 X 16, Bolt; (A: Used With Double Twine Arms Only) M8 X 16, Bolt; (A: Straddle Mount) M8 X 16 (Use With R176971 Or R186016), Bolt; (A: For Multicrop Machine Only) M8 X 16, Bolt; (A: 9550 ( -6900) 9550sh ( -6900)) M8 X 16, Bolt; M8 X 16 Throttle, Bolt; M8 X 16, Bolt; M8 X 16, Without/Windshield, Bolt; (A: 9550 ( -6900) 9550sh ( -6900)) M8 X 16, Bolt; M8 X 10, Bolt; M8 X 16 (2 Used On L.H. 335) (4 Used On 375), Bolt; (A: 9550 (6901- ) 9550sh (6901- )) M8 X 16, Bolt; (A: For 9650 ( -6967) & 9750 ( -69*57)) M8 X 16, Bolt; (A) (B) M8 X 16, Bolt; (A: Used With Optional Double Twine Arm.) M8 X 16, Bolt; M8 X 16 Rh, Bolt; M8 X 16 (A), Bolt; M8 X 16 Square Neck, Bolt; (A: Included In Ae48634) M8 X 16, Bolt; (A) M8 X 16, Bolt; M8 X 16, R.H. Side Only	6
03***07	Bolt; M10 X 25 (B) (C) (D), Bolt; M10 X 25 (Hs, Head Marked 10.9), Bolt; M10 X 25 (Hs, Head Marked 10.9) (Square Neck), Bolt; M10 X 25, Bolt; M10 X 25, Used With Converging Wheels, Bolt; M10 X 25, Access Door, Bolt; M10 X 25 (Hs, Head Marked 10.9) (Diesel), Bolt; M10 X 25 (Hs, Head Marked 10.9) Front Deflector, Bolt; M10 X 25, (18 Used, 430; 22 Used, 530), Bolt; M10 X 25, (3 Used, 430; 4 Used, 530), Bolt; M10 X 25, 3 Used 456; 4 Used 556, Bolt; M10 X 25 (3 Used, 435; 4 Used, 535), Bolt; M10 X 25 Bottom Hole Of Belt Guide R.H. Side, Bolt; M10 X 25 North America, Bolt; M10 X 25, 3 Used 466; 4 Used 566, Bolt; M10 X 25 Used With Converging Wheels, Bolt, Bolt; M10 X 25 (Sub For 03m7191), Bolt; M10 X 25, 456 Silage Special, Bolt; M10 X 25 Europe, Bolt; M10 X 25, (44 Used, 327; 78 Used, 337), Bolt; M10 X 25 3 Used On 335, 4 Used On 375, Bolt; M10 X 25 457 Silage Special, Bolt; (A) (B) (C) (D) M10 X 25, Bolt; M10 X 25 9 Used On 335, 11 Used On 375, Bolt; M10 X 25 (10 Used 435; 14 Used 535)	5
11***85	Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480"	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	4

See all parts with full part numbers in Heavy Parts AI →

Pickup Gauge Wheel

John Deere : 338 - Baler : Pickup Gauge Wheel

11***38	Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69*01- ) 9550sh (69*01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm	1
14***17	Lock Nut, Lock Nut; (Not Illustrated) (Use With T149597), Lock Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M10, Lock Nut; M10, (15 Used, 240) (20 Used, 260), Lock Nut; M10 Nylstop, Lock Nut; M10 (Roll Only), Lock Nut; M10 (Sub For Bp12214), Lock Nut; M10, Lock Nut; M10 (Sub For 14m7337), Lock Nut; M10 Use With Re290733, Lock Nut; M10 (Hs=10.9), Lock Nut; (B: For Two Selective Control Valves) (C: For Three Selective Control Valves) M10 (Sub For Er022412 Appl), Lock Nut; M10 M10, Lock Nut; (B: Upto Sr.No. 5410-Xxxxxx, 5610-Xxxxxx.) M10 Lh, Lock Nut; (A: Included In Ae48634) M10, Lock Nut; M10 (Use With Re284180), Lock Nut, Lock Nut; (B: 4wd Powered, Rear Axle) M10, Lock Nut; M10 Powered, Rear Axle, Lock Nut; (B) M10, Lock Nut; M10 M10 (Sub For Er022412 Appl), Lock Nut; M10 (10.9) (Sub For Er022412 Appl), Lock Nut; (A) M10, Nylon Locknut, Lock Nut; M10 Rh, Lock Nut; M10, Lock Nut; M10 (Sub For Er022412 Appl), Lock Nut; M10 (Sub For 14m7167), Lock Nut; (B: (Fixed Rear Axle) Powered Rear Wheels) M10, Lock Nut; (B: (Xxxxxx- ) 8560-00*31; 8760-0081; 8960-00**15) M10, Lock Nut; M10, (Sub For 14m7396)	1
24***51	Washer; 26.187 X 44.450 X 1.524 mm (1-1/32" X 1-3/4" X 0.060"), Washer; 1-1/32" X 1-3/4" X 0,6", Washer, Washer; 11/32"X1-3/4"X.060", Washer; 1-1/32" X 1-3/4" X .060", Washer; (A: Included In Ae48634) 1-1/32" X 1-3/4" X 0.060", Washer; 1-1/32"X1-3/4"X.060", Washer; 1/32"X1-3/4", Washer; (A) 1-1/32" X 1-3/4" X .06 0", Washer; 0.060" X 1-1/3" X 1-3/4", Washer; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 1-1/32" X 1-3/4" X 0.060", Washer; 1-1/32"X1-1/4"X.060", Washer; 1-1/32" X 1-3/4" X 0.060" (For Dc47633), Washer; 1.031" X 1.75" X 0.06", Washer; 1-1/32" X 1-3/4" X 0.060", Washer; 1-1/32" X 1-3/4" X 0.060" Lh, Rh, Washer; Ar, 1-1/32" X 1-3/4" X .060", Washer; (A) .060" X 1-1/3"X 1-3/4", Washer; 1-1/32" X 1-3/4" X 0.060" (B), (1 Nominal), Washer; 1-1/32" X 1-3/4" X 0.060", (Sub For Gep2316), Washer; 1-13/32" X 1-3/4" X .060", Washer; 1-1/32" X 1-3/4" X 0,06", Washer; (A) 1-1/32" X 1-3/4" X 0.060" L.H.	0
AE***80	Support, Support; (Use With Ae41161 Pickup Frame)	1

See all parts with full part numbers in Heavy Parts AI →

Plungerhead

John Deere : 338 - Baler : Plungerhead

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	2
10***28	Bolt; 3/8" X 1-1/2" (8 Used, 18'; 12 Used, 20'), Bolt; 3/8" X 1-1/2" (Sub 09h1590), Bolt; 3/8" X 1-1/2" (C), Bolt; 3/8" X 1-1/2", Bolt; 3/8"X1-1/2", Bolt; 3/8" X 1-1/2" (Use With 12h304 And 14h812), Bolt; 3/8" X 1-1/2" (B), Bolt; 3/8" X 1-1/2" (Sub For 10h1027), Bolt; 3/8" X 1-1/2" (Use With 14h812)	2
10***66	Bolt; (A) 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4", Bolt; 3/8"X1-3/4"	2
10***66	Bolt; 5/16"X1", Bolt; (B: For 390 Offset Mower) 5/16" X 1" 305mm (12''), Bolt; 5/16" X 1", Bolt; (A: For 390 Mower) 5/16" X 1", Bolt; 5/16" X 1" 5/16" X 1"	6

See all parts with full part numbers in Heavy Parts AI →

Plungerhead Crank Arm

John Deere : 338 - Baler : Plungerhead Crank Arm

11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	1
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	1
19***24	Cap Screw; 1/2"X4-3/4", Cap Screw; (A), Cap Screw; 1/2" X 4-3/4", Cap Screw; 1/2"X4-3/4" (Sub For 19h1739), Cap Screw; (A) 1/2" X 4-3/4", Cap Screw; Sg2, 1/2"X4-3/4", Cap Screw; (A) (B) 1/2" X 4-3/4", Cap Screw; (C) 1/2" X 4-3/4", Cap Screw; 1/2" X 4-3/4" (Sub For 19h1739), Cap Screw; (F) 1/2" X 4-3/4"	1
19***05	Cap Screw; 3/4" X 5" (Use With An261330), Cap Screw; 3/4" X 5" (Use With An233314), Cap Screw; 3/4" X 5" (Hs, Sae 8), Cap Screw; 3/4" X 5" (F Grade), Cap Screw; 3/4" X 5", Cap Screw; 3/4"X5", Cap Screw; 3/4" X 5" Hs, Sae 8, Cap Screw; 3/4" X 5", Hs, Sae 8, Cap Screw; (B) 3/4" X 5" Hs, Sae 8, Inner, Cap Screw; 3/4" X 5" Torque To 280 Lb-Ft(380 N-M) Using Never Sieze On Threads, Cap Screw; 3/4" X 5" (Sub For 19h3210), Cap Screw; 3/4" X 5" (A), Cap Screw; 3/4" X 5" Incld In 1, 2, Cap Screw; (B) 3/4" X 5", Hs, Sae 8 Inner	1

See all parts with full part numbers in Heavy Parts AI →

Plungerhead Guides

John Deere : 338 - Baler : Plungerhead Guides

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	4
03***95	Bolt; 3/8"X1-1/2", Bolt; 3/8"X1-1/2" (Sub For 03h1468), Bolt; 3/8" X 1-1/2" (Use With H127801), Bolt; 3/8" X 1-1/2", (22 Used On 18', 26 Used On 21' And 25' And 30 Used On 30'), Bolt; 3/8" X 1-1/2", (16 Used On 15' And 18', 20 Used On 21' And 25', 24 Used On 30'), Bolt; 3/8" X 1-1/2" (L.H. End - 4 Used; R.H. End - 2 Used, 1st And 4th Holes), Bolt; 3/8" X 1-1/2" (Rh), Bolt; 9.525 X 38.100 mm (3/8" X 1-1/2"), Bolt; 3/8" X 1-1/2", (40-Foot Boom), Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2" (Rigid), Bolt; 3/8" X 1-1/2" (Bolted Sections), Bolt; 3/8" X 1-1/2", (6 Used For 660, 8 Used For 680), Bolt; 3/8" X 1-1/2" Repair Kit, Bolt; 3/8"X1-1/2" (Sub For 03h1468 Appl), Bolt; 3/8" X 1-1/2" Lh, Bolt; 3/8" X 1-1/2", (Variable Drive)	1
03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	4
03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	10

See all parts with full part numbers in Heavy Parts AI →

Plungerhead Pitman ( - 310000)

John Deere : 338 - Baler : Plungerhead Pitman ( - 310000)

03***21	Bolt; 5/16" X 1-1/4" 5/16" X 1-1/4", Bolt; 5/16" X 1-1/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 1-1/4", Bolt, Bolt; 5/16" X 1-1/4" (Hs, Sae 8), Bolt; 5/16" X 1-1/4", (3 Used Twin Swath), Bolt; 5/16" X 1-1/4", (Use With (4) 12h303 And (4) 14h785), Bolt; 5/16" X 1-1/4" (Hs,Sae 8), Bolt; 5/16" X 1-1/4"), Bolt; (Use With (4) 12h303 And (4) 14h785)	1
11***21	Cotter Pin, Cotter Pin; 3/8" X 2-1/2", Cotter Pin; 3/8" X 2-1/2", Use With Quik-Coupler, Cotter Pin; 3/8" X 2-1/2" (Use With T125931 Or T125926), Cotter Pin; 3/8" X 2-1/2" (Use With Au42333 Or T125926)	1
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	2
19***98	Cap Screw; 1/2" X 1-1/4", Cap Screw; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/2" X 1-1/4", Cap Screw; (A: See Key 33) 1/2" X 1-1/4", Cap Screw; (A: 12' Main Frame) (B: 2nd Rank) 1/2" X 1-1/4", Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -69*00)) 1/2" X 1-1/4", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1527), Cap Screw; (E: 1.8 M (72 In.)(6 Ft.)) 1/2" X 1-1/4", Cap Screw; 1/2"X1-3/8", Cap Screw; 1/2"X1-1/4" (For Al39202), Cap Screw; (B) 1/2" X 1-1/4", (Use With 1 372 mm (54") Extension), Cap Screw; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" X 1-1/4" (Sub For (8) 19h1815), Cap Screw; 1/2" X 1-1/4", (5 Used L.H.) (5 Used R.H.), Cap Screw; 1/2" X 1-3/8", Cap Screw; 1/2" X 1-1/4" Hs, Sae 8, 1/2" X 1 1/4", Cap Screw; 1/2" X 1-1/4" 1/2" X 1 1/4", Cap Screw; 1/2" X 1-1/4" 8 Ft., Cap Screw; 1/2" X 1-1/4" Brazil Only, Cap Screw; 1/2"X1-1/4" (Ord Al56097), Cap Screw; 1/2" X 1-1/4" (Dh-01, Dh-02 And Gh-02), Cap Screw; (A) 1/2"X1-1/4", Cap Screw; 1/2" X 1-1/4", (Sub For Ffsb109249), Cap Screw; Hs, Sae 8, 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" 6 Ft., Cap Screw; 1/2" X 1 1/4", Cap Screw, Cap Screw; 1/2" X 1-1/4" On Pressure Port, Cap Screw; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" X 1-1/4" (Sub For (9) 19h1815), Cap Screw; 1/2" X 1-1/4" (Use With 24h1226, N280839, N280837 Or N280838, N280906 And K40014), Cap Screw; 1/2" X 1-1/4" 7 Ft., Cap Screw; 1/2" X 1-1/4", Hs, Sae 8, Full Thread, (Sub For 19h3299), Cap Screw; 1/2" X 1-1/4", Sae 8, Cap Screw; 1/2" X 1-1/4" 1/2 Unc-2a X 1 1/4 A17f Zn, Cap Screw; 12.700 X 31.750 mm, Cap Screw; 1/2" X 1-1/4" Use With Sae 2 And 3 Flywheel Hsg, Cap Screw; 1/2" X 1-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/4, Cap Screw; 1/2" X 1-1/4" (A) (B), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Hs, Sae 8, Cap Screw; 1/2" X 1-1/4" (Flex), Cap Screw; (A) 1/2" X 1-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/4" (Use With 1 372 mm (54") Extension) (B), Cap Screw; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (Use With Sae 2 Or 3 Flywheel Housing), Cap Screw; 1/2" X 1-1/4", (With Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/4", (Torque 103 Lb-Ft), Cap Screw; 1/2" X 1-1/4", (Hs, Sae 8), Cap Screw; 1/2"X1-1/4", Cap Screw; (D: 3 M (120 In.)(10 Ft.)) 1/2" X 1-1/4" (Sub For (10) 19h1815), Cap Screw; 1/2" X 1-1/4", (Use With Sae, 2 Or 3 Flywheel Housing), Cap Screw; (A: 12" Main Frame) (B: 2nd Rank) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" 9 Ft., Cap Screw; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" X 1-1/4" (Sub For (7) 19h1815), Cap Screw; 1/2" X 1-1/4" Hs, Sae 8, Cap Screw; 12.700 X 31.750 mm, Torque To 63 Lb-Ft (85 N-M), Cap Screw; 1/2" X 1-1/4" 10 Ft.	2

See all parts with full part numbers in Heavy Parts AI →

Plungerhead Pitman (310001 - )

John Deere : 338 - Baler : Plungerhead Pitman (310001 - )

03***21	Bolt; 5/16" X 1-1/4" 5/16" X 1-1/4", Bolt; 5/16" X 1-1/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 1-1/4", Bolt, Bolt; 5/16" X 1-1/4" (Hs, Sae 8), Bolt; 5/16" X 1-1/4", (3 Used Twin Swath), Bolt; 5/16" X 1-1/4", (Use With (4) 12h303 And (4) 14h785), Bolt; 5/16" X 1-1/4" (Hs,Sae 8), Bolt; 5/16" X 1-1/4"), Bolt; (Use With (4) 12h303 And (4) 14h785)	1
11***21	Cotter Pin, Cotter Pin; 3/8" X 2-1/2", Cotter Pin; 3/8" X 2-1/2", Use With Quik-Coupler, Cotter Pin; 3/8" X 2-1/2" (Use With T125931 Or T125926), Cotter Pin; 3/8" X 2-1/2" (Use With Au42333 Or T125926)	1
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	2
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	1

See all parts with full part numbers in Heavy Parts AI →

Plungerhead Stop

John Deere : 338 - Baler : Plungerhead Stop

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	1
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2
14***80	Nut; 3/8" 3/8" (Sub For L111424 Appl), Nut; 3/8", Unf, R.H. Thread, (Less Cab), Nut, Nut; 3/8" (Not On 930 Flex Arg), Nut; 3/8", (Sub For 14h846), Nut; 3/8" (Sub For F1300600u), Nut; 3/8", Unf., Nut; (B) (C) 0,375", Nut; 3/8" (Sub For 14h774, This Application), Nut; 3/8", Grade 5, Nut; 3/8" Grade 5, (Sub For 14h846), Nut; 3/8" (Sub For L111424 Appl), Nut; 3/8", Nut; 3/8", Nut; 3/8", Unf, Nut; (E: ( -Xxxxxx) 7600-00*64; 7700-0058; 7800-00**04) 3/8", Nut; 3/8", (Sub For 14h846) Grade 5, Nut; 9.525 mm (3/8") Unf, Nut; (B) (C) M9,52, Nut; 3/8", (Sub For (2) 14h846), Nut; (A) 3/8", Unf, Nut; 3/8", Unf, R.H. Thread (With Cab), Nut; 9.525 mm (3/8"), Nut; 3/8" 3/8", Nut; (Sub For L111424) 3/8", Nut; (A) 3/8", Nut; 3/8" (Sub For F1300600u)(Not Shown), Nut; 3/8", (Sub For 14h846) 1/4" X 7/8", Nut; 3/8" (Sub For 14h846, This Application)	2
19***93	Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69*00) 9550sh (-69*00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine	1

See all parts with full part numbers in Heavy Parts AI →

Powershaft W/Plastic Shields (Weasler) (Category 3 & 4)

John Deere : 338 - Baler : Powershaft W/Plastic Shields (Weasler) (Category 3 & 4)

34***87	Spring Pin; 3/16" X 3/4" (Sub For 34h73), Spring Pin; 3/16" X 3/4", Use With Telescoping Rod, Spring Pin; 3/16" X 3/4", Spring Pin; 3/16" X 3/8", Spring Pin; 3/16" X 3/4", (Sub For 34h73), Spring Pin; (A: 9550 ( - 69*00) 9550sh ( - 6900)) 3/16" X 3/4", Spring Pin; 3/16" X 3/4" Sub For 34h73, Spring Pin, Spring Pin; (B), Spring Pin; (C) 3/16" X 3/4", Spring Pin; (A: For 9650 Sts ( -6900) & 9750 Sts ( -69*00)) 3/16" X 3/4", Spring Pin; 4.775 X 19.050 mm, Spring Pin; 3/16" X 3/4", 90°, Spring Pin; (A) 3/16"X3/4", Spring Pin; 3/16" X 3/4" 90°, Spring Pin; 3/16" X 3/4" 3/16"X3/4", Spring Pin; 3/16" X 3/4", Spring Pin; 3/16" X 3/4", (Sub For R10193), Spring Pin; (C) 3/16"X3/4", Spring Pin; 3/16" X 3/4", (Sub An151694), Spring Pin; 0.188"X0.750", Spring Pin; 3/16"X3/4", Spring Pin; 4.775 X 19.050 mm (3/16" X 3/4") 90°, Spring Pin; 4.775 X 19.050 mm (3/16" X 3/4"), Spring Pin; 3/16"X3/4" (Sub For 34m7030), Spring Pin; 3/16" X 3/4", (Sub For R10193 Or 34h194), Spring Pin, Spring Pin; (B) 3/16" X 3/4", Spring Pin; (B) 3/16"X3/4", Spring Pin; (A) 3/16" X 3/4", Spring Pin; 3/16" X 3/4", (Sub For 37h73)	4
AE***16	Cross And Bearing As; (Sub For E38064 Or Ae23517), Cross And Bearing As; (1000 Rpm), Cross And Bearing As, Cross And Bearing As; (A) (B) (C), Cross And Bearing As; (Sub For Aw12398 And Am2568e), Cross And Bearing As; (A), Cross And Bearing As; Cork, Cross And Bearing As; Spider And Bearing Assembly, Cross And Bearing As; Includes Jd7760, Cross And Bearing As; (A: Weasler Drive) (B: Neapco Drive), Cross And Bearing As; (B: Category 4), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760) Greaseable, Cross And Bearing As; (Sub For E38064, Ae23517 And Ae26166), Cross And Bearing As; Category 4, Cross And Bearing As; (Sub For E38064 And Ae23517), Cross And Bearing As; (Sub For Am2568e), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760), Cross And Bearing As; (Sub For Aw32447, This Application), Cross And Bearing As; (A)(B)(C), Cross And Bearing As; (A) (Sub For E38064, Ae23517 Or Am2568e), Cross And Bearing As; Use For Ah154738, Cross And Bearing As; (Category No. 4 Power Take-Off), Cross And Bearing As; (A) (B), Cross And Bearing As; Heavy Duty, Cross And Bearing As; (B) (C), Cross And Bearing As; (Sub For Am2568e Or Am2566e Or Bp12982 Or Bp13177) (540 Rpm), Cross And Bearing As; (Sub For Gdk82-17), Cross And Bearing As; (Sub For Grm006a), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760)Greaseable	1
AE***35	Universal Joint Yoke; (B: Category 4), Universal Joint Yoke, Universal Joint Yoke; Heavy-Duty	1
AE***90	Shaft, Shaft; (A: Category 3) (B: Category 4), Shaft; Power Take-Off	1

See all parts with full part numbers in Heavy Parts AI →

Powershaft W/Steel Shields (Weasler) (Category 3 & 4)

John Deere : 338 - Baler : Powershaft W/Steel Shields (Weasler) (Category 3 & 4)

34***87	Spring Pin; 3/16" X 3/4" (Sub For 34h73), Spring Pin; 3/16" X 3/4", Use With Telescoping Rod, Spring Pin; 3/16" X 3/4", Spring Pin; 3/16" X 3/8", Spring Pin; 3/16" X 3/4", (Sub For 34h73), Spring Pin; (A: 9550 ( - 69*00) 9550sh ( - 6900)) 3/16" X 3/4", Spring Pin; 3/16" X 3/4" Sub For 34h73, Spring Pin, Spring Pin; (B), Spring Pin; (C) 3/16" X 3/4", Spring Pin; (A: For 9650 Sts ( -6900) & 9750 Sts ( -69*00)) 3/16" X 3/4", Spring Pin; 4.775 X 19.050 mm, Spring Pin; 3/16" X 3/4", 90°, Spring Pin; (A) 3/16"X3/4", Spring Pin; 3/16" X 3/4" 90°, Spring Pin; 3/16" X 3/4" 3/16"X3/4", Spring Pin; 3/16" X 3/4", Spring Pin; 3/16" X 3/4", (Sub For R10193), Spring Pin; (C) 3/16"X3/4", Spring Pin; 3/16" X 3/4", (Sub An151694), Spring Pin; 0.188"X0.750", Spring Pin; 3/16"X3/4", Spring Pin; 4.775 X 19.050 mm (3/16" X 3/4") 90°, Spring Pin; 4.775 X 19.050 mm (3/16" X 3/4"), Spring Pin; 3/16"X3/4" (Sub For 34m7030), Spring Pin; 3/16" X 3/4", (Sub For R10193 Or 34h194), Spring Pin, Spring Pin; (B) 3/16" X 3/4", Spring Pin; (B) 3/16"X3/4", Spring Pin; (A) 3/16" X 3/4", Spring Pin; 3/16" X 3/4", (Sub For 37h73)	4
AE***16	Cross And Bearing As; (Sub For E38064 Or Ae23517), Cross And Bearing As; (1000 Rpm), Cross And Bearing As, Cross And Bearing As; (A) (B) (C), Cross And Bearing As; (Sub For Aw12398 And Am2568e), Cross And Bearing As; (A), Cross And Bearing As; Cork, Cross And Bearing As; Spider And Bearing Assembly, Cross And Bearing As; Includes Jd7760, Cross And Bearing As; (A: Weasler Drive) (B: Neapco Drive), Cross And Bearing As; (B: Category 4), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760) Greaseable, Cross And Bearing As; (Sub For E38064, Ae23517 And Ae26166), Cross And Bearing As; Category 4, Cross And Bearing As; (Sub For E38064 And Ae23517), Cross And Bearing As; (Sub For Am2568e), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760), Cross And Bearing As; (Sub For Aw32447, This Application), Cross And Bearing As; (A)(B)(C), Cross And Bearing As; (A) (Sub For E38064, Ae23517 Or Am2568e), Cross And Bearing As; Use For Ah154738, Cross And Bearing As; (Category No. 4 Power Take-Off), Cross And Bearing As; (A) (B), Cross And Bearing As; Heavy Duty, Cross And Bearing As; (B) (C), Cross And Bearing As; (Sub For Am2568e Or Am2566e Or Bp12982 Or Bp13177) (540 Rpm), Cross And Bearing As; (Sub For Gdk82-17), Cross And Bearing As; (Sub For Grm006a), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760)Greaseable	1
AE***35	Universal Joint Yoke; (B: Category 4), Universal Joint Yoke, Universal Joint Yoke; Heavy-Duty	1
AE***90	Shaft, Shaft; (A: Category 3) (B: Category 4), Shaft; Power Take-Off	1

See all parts with full part numbers in Heavy Parts AI →

Powershaft And Shields

John Deere : 338 - Baler : Powershaft And Shields

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	3
AE***16	Cross And Bearing As; (Sub For E38064 Or Ae23517), Cross And Bearing As; (1000 Rpm), Cross And Bearing As, Cross And Bearing As; (A) (B) (C), Cross And Bearing As; (Sub For Aw12398 And Am2568e), Cross And Bearing As; (A), Cross And Bearing As; Cork, Cross And Bearing As; Spider And Bearing Assembly, Cross And Bearing As; Includes Jd7760, Cross And Bearing As; (A: Weasler Drive) (B: Neapco Drive), Cross And Bearing As; (B: Category 4), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760) Greaseable, Cross And Bearing As; (Sub For E38064, Ae23517 And Ae26166), Cross And Bearing As; Category 4, Cross And Bearing As; (Sub For E38064 And Ae23517), Cross And Bearing As; (Sub For Am2568e), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760), Cross And Bearing As; (Sub For Aw32447, This Application), Cross And Bearing As; (A)(B)(C), Cross And Bearing As; (A) (Sub For E38064, Ae23517 Or Am2568e), Cross And Bearing As; Use For Ah154738, Cross And Bearing As; (Category No. 4 Power Take-Off), Cross And Bearing As; (A) (B), Cross And Bearing As; Heavy Duty, Cross And Bearing As; (B) (C), Cross And Bearing As; (Sub For Am2568e Or Am2566e Or Bp12982 Or Bp13177) (540 Rpm), Cross And Bearing As; (Sub For Gdk82-17), Cross And Bearing As; (Sub For Grm006a), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760)Greaseable	1
AE***90	Shaft, Shaft; (A: Category 3) (B: Category 4), Shaft; Power Take-Off	1
AE***41	Shield; (C) Power Take-Off, With Decal, Shield; Power Take-Off (Includes Decals) (Sub For E73858 And E64199), Shield; (Sub For E42646), Shield; (Sub For E42646 Or Ae34349), Shield; With Decals, Shield; (Includes Decals) (Sub For E42646 Or E64199), Shield; Power Take-Off, With Decal, (Sub For E64199), Shield; Power Take-Off, With Decal, Shield; (B) (Sub For E64199) Power Take-Off, Shield; (B) Power Take-Off, With Decal, Shield; Power Take-Off, (Sub For E64199)	1

See all parts with full part numbers in Heavy Parts AI →

Side-Drop Bale Chute

John Deere : 338 - Baler : Side-Drop Bale Chute

03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	1
03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	2
03***59	Bolt; (A) (B) 1/2" X 1", (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension), Bolt; 1/2" X 1" (Regular), Bolt; 1/2"X1", Bolt; 1/2" X 1" Rh, Bolt; 1/2" X 1" (A), Bolt; 1/2" X 1", (Part Of Ae41712), Bolt; 1/2" X 1", (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; 1/2" X 1" (24 Used, Short Tongue) (30 Used, Long Tongue), Bolt; (C) 1/2" X 1", Bolt; (C) (D) 1/2" X 1", Bolt; 1/2" X 1", (1243-4 Used), Bolt; Ar, 1/2"X1", Bolt; 1/2" X 1", Part Of Ae41701, Bolt; 1/2" X 1", (282), Bolt; 1/2" X 1", Bolt; 1/2" X 1", (For 1983 And 1984 Machines), Bolt, Bolt; 1/2" X 1" (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1", (Sub For E50302), Bolt; 1/2" X 1", Rd Hd, Bolt; 1/2" X 1", Short Neck (Use With Depth Gauging Press Wheel Attachment), Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (Use With 1 372 mm (54") Extension), Bolt; 1/2" X 1", (Regular), Bolt; 1/2" X 1", (2 Used, 347; 1 Used, 467), Bolt; (B) 1/2" X 1", Bolt; 1/2x1", Bolt; 1/2" X 1" (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A), (B), Bolt; 1/2" X 1", Rd. Hd., Bolt; 1/2" X 1" (B), Bolt; 1/2" X 1", R.H.	2
03***09	Bolt; 5/16" X 1", Bolt; 5/16" X 1" (Disk), Bolt; 5/16" X 1" (Use With 14h819), Bolt; (243, 244, 343, 344, 443, 444, 543, 546, 643, 644, 645, 843, 844), Bolt; 5/16" X 1" (213-8 Used; 215 And 216-10 Used; 218-12 Used; 220, 222, And 224-14 Used), Bolt; 5/16" X 1", Rd. Hd., Bolt; 5/16" X 1", (Grain, Corn And Bean), Bolt; (B) 5/16" X 1", Bolt; 5/16" X 1" (Use With N10213), Bolt, Bolt; X 5/16" X 1", Bolt; 5/16" X 1", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a, And 853a; 22 Used-854a And 1253a), Bolt; 7.925 X 25.400 mm (5/16" X 1"), Bolt; 5/16" X 1" (913-8 Used; 915-10 Used; 918-12 Used; 920, 922, And 924-14 Used; 925-16 Used, 930-20 Used), Bolt; 5/16" X 1", (Use With 12h303, 14h785), Bolt; 5/16" X 1" (913, 915, 918, 920-4 Used; 922, 924 And 925, 6 Used; 930-8 Used) (Thru Backsheet Angles), Bolt; 5/16"X1", Bolt; (W) 5/16" X 1", Bolt; 5/16" X 1" (Square Neck), Bolt; 5/16" X 1" (A), Bolt; (C) 5/16" X 1", Bolt; 7.925 X 25.400 mm (5/16" X 1") Reinforcement To Channel, Bolt; 5/16" X 1" (Sub For H75408), Bolt; (A) 5/16" X 1", Bolt; Rd. Hd., 5/16" X 1", Bolt; 5/16" X 1" (Use With 14h785)	1

See all parts with full part numbers in Heavy Parts AI →

Safety Chain For Towed Equipment

John Deere : 338 - Baler : Safety Chain For Towed Equipment

34***45	Pin; 1/8" X 5/8" (B), Pin; (A), Pin; 1/8" X 5/8", Pin; 1/8" X 5/8" (Use With Ar90581), Pin; 1/8" X 5/8" (Use With 10, 000 Lb Chain), Pin; (C) 1/8" X 5/8", Pin; 1/8" X 5/8" (Ru And Or), Pin; 1/8" X 5/8", (Rc And St), Pin; 1/8" X 5/8", (Use With 10,000 Lb Chain), Pin; (Use With 10,000 Lb Chain), Pin; 1/8" X 5/8", (Ru And Or), Pin; 1/8"X5/8", Pin; (A) 1/8" X 5/8", Pin, Pin; (B) 1/8" X 5/8", Spring Pin; 1/8" X 5/8", Pin; 1/8" X 5/8", Used With 10,000 Lbs. Chain, Pin; 0,125" X 0,625", Pin; (A: 10, 000 Lb.) 1/8" X 5/8"	1
34***48	Spring Pin; 1/8" X 13/16", Used With 20,000 Lbs. Chain, Spring Pin; 1/8" X 13/16", (Use With 20,000 Lb Chain), Spring Pin; 1/8" X 13/16" (Use With Ar90579 Or Ar90583), Spring Pin; 1/8" X 13/16", Spring Pin; 1/8" X 13/16", Spring Pin; (B: 20, 000 Lb.) 1/8" X 13/16", Spring Pin, Spring Pin; (A) 1/8" X 13/16", Spring Pin; 1/8" X 13/16" (A), Spring Pin; 1/8" X 13/16", 6-Row Narrow W/Split Row, Spring Pin; 1/8" X 13/16" (Sub Z9785h), Spring Pin; 1/8"X13/16" (Sub For 34h42)	1
AE***65	Safety Chain Adapter; (A) (Sub Ae71233), Safety Chain Adapter; (A) (Sub For R74595, R74596, R69398, R74594 Or R74597 ) (Sub Ae71233), Safety Chain Adapter; (Sub Ae71233), Safety Chain Adapter, Safety Chain Adapter; (A) (Sub For R74595, R74596, R69398, R74594 Or R74597) (Sub Ae71233)	1
AE***67	Safety Chain Adapter; (B) (Sub Ae71231), Safety Chain Adapter; (Sub For R69403, R74599, R74600, R74601 And R74602), Safety Chain Adapter; (Sub Ae71231), Safety Chain Adapter, Safety Chain Adapter; (A) Nsep (Ord Ae71231), Safety Chain Adapter; Nsep (Ord Ae71231)	1

See all parts with full part numbers in Heavy Parts AI →

Shields (Australia Only)

John Deere : 338 - Baler : Shields (Australia Only)

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	0
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	2
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***72	Bolt; (A: From Sr No. 5103s-01*52, 5203-0081, 5104/5204/5038d-0001.) 1/2" X 1", Bolt, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1", Cap Screw; 1/2" X 1", (Sub For 19h2898, This Application), Bolt; 1/2" X 1", Bolt; 1/2" X 1" (Flex), Bolt; 1/2" X 1", (Ea-G, Ge-01), Bolt; (A: 9550 (7001-) 9550sh (7001-)) 1/2" X 1", Bolt; 12.700 X 25.400 mm, Bolt; 1/2" X 1" (Dh-01, Dh-02 And Gh-02), Bolt; 1/2" X 1" (30"), Bolt; (A: With Cab) 1/2" X 1" (Hs, Sae 8), Bolt; (C: Upto Sr.No.5103s-0152, 5203-0080.) 1/2" X 1" Hs=10.9, Bolt; 1/2"X1" (For Cc27374, Cc27375, Cc30696, Cc30697, Cc30954, Cc30955, E75527), Bolt; 1/2" X 1" Hs, Sae 8, 1/2" X 1", Bolt; 1/2"X1", Bolt; 1/2" X 1" (Hs, Sae 8) (Part Of Ae41712), Bolt; 1/2" X 1" (Hs, Sae 8), Bolt; 1/2" X 1", Hs, Sae 8, Bolt; 1/2" X 1" (With Mechanical Front Wheel Drive), Bolt; 1/2" X 1", (Without Spacer), Bolt; 1/2" X 1" Hs, Sae 8, Bolt; Hs, Sae 8, 1/2" X 1", Bolt; 1/2" X 1", (Twin Swath), Bolt; (A: With Cab/Isolated Open Operated Station) 1/2" X 1", Bolt; 1/2" X 1" Use Loctite 271, Torque To 88 Ft-Lbs, Bolt; 1/2" X 1" (Sae 8), Bolt; (C: Upto Sr.No.5103/5103s-0151, 5203-0080.) 1/2" X 1", Bolt; 1/2" X 1" Incld In 24, Bolt; 1/2" X 1" Incld In 8, Bolt; (B) (D) 1/2" X 1", Bolt; 1/2" X 1" (Hs=10.9), Bolt; (B) 1/2" X 1", Bolt; 1/2" X 1", (With Iron-Gard), Cap Screw; 1/2" X 1", (Sub For Ffsb108086), Bolt; (A) 1/2" X 1" (Hs, Sae 8), Bolt; (A: 9550 (-7000) 9550sh (-70**00)) 1/2" X 1", Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1" Hs= 10.9, Bolt; 1/2" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 1/2" X 1", (540/1000 Rpm Only)	2

See all parts with full part numbers in Heavy Parts AI →

Slip Clutch

John Deere : 338 - Baler : Slip Clutch

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	8
19***68	Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Model 12w And 16n, Cap Screw; 1/2" X 3-1/2", Cap Screw; 12.700 X 88.900 mm, Cap Screw; 1/2" X 3-1/2" (540 Rpm), Cap Screw; 1/2" X 3-1/2" (D), Cap Screw; 1/2" X 3-1/2", Incld In 5, Replace Pin In Lower Hinge With Bolt, Nut And Washer, Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Model 8w, 10w, 10n And 12n, Cap Screw; (K) 1/2" X 3-1/2", Cap Screw; 12.700 X 88.900 mm (1/2" X 3-1/2"), Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 3-1/2", (Hs, Sae 8) (Disk) (Use With N217396), Cap Screw; 1/2" X 3-1/2", Hs Sae 8, Cap Screw; 1/2" X 3-1/2" Incld In 1, Cap Screw; Hs, Sae 8, 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" Incld In 2, Cap Screw; 12.700 X 88.900 mm, Incld In 7, Cap Screw; 1/2" X 3-1/2" (Sub For Z49397)	8
24***11	Washer; (B: 2.4 M (96 In.)(8 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; 17/32"X1-1/16", Washer; 1/2", Washer; 17/32" X 1-1/16" X 0.090", (650), Washer; 13.487 X 26.975 X 2.286 mm (17/32" X 1-1/16" X 0.090") (694) (Thru Unused Holes In Floor Sheets), Washer; (B), Washer; (Nla), Washer; 17/32" X 1-1/16" X 0.090" (913-10 Used;915-12 Used; 918-14 Used; 920, 922, 924-16 Used; 925 And 930-22 Used), Washer; (A) (B) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (Use With Ar39137), Washer; 17/32" X 1-1/16" X 0.090" 0.562" X 1" X 0.048", Washer; 17/32" X 1-1/16" X 0.090", R.H., Washer; (Sub For Ffsb109341), Washer; 17/32" X 1-1/16" X 0.090", (3 Nominal), Washer; 17/32" X 1-1/16" X 0.090" Tow Behind, Washer; 17/32" X 1-1/16" X 0.090" (213-10;215 & 216-12;218-14; 220, 222, 224-16;230-22), Washer; 17/32" X 1-1/16" X 0.090" Use With (4) 19m7790, Washer; 17/32" X 1-1/16" X 0.090", (Used With Adjustable Sieve), Washer; 17/32" X 1-1/16" X 0.090", (Use With Adjustable Sieve), Washer; 17/32" X 1-1/16" X 0.090" 6-Row, 36-, 38- And 40-In.; 8-Row, 30-In. 8-Row, 70 cm, Washer; 17/32" X 1-1/16" X 0.090" (30"), Washer; (A: 12-Row/22") 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (Sub For D2865r), Washer; 17/32" X 1-1/16", Washer; (E) 17/32" X 1-1/16" X 0.090", Washer; 3/8" X 7/16", Washer; 17/32" X 1-1/16" X 0.090" 6 Ft., Washer; 17/32" X 1-1/16" X 0.090" (D), Washer; (W) (F) 17/32" X 1-1/16" X 0.090", Washer; 17/32"X1-1/16"X0.090", Washer; 17/32" X 1-1/16" X 0.090" (A), Washer; (C) 17/32" X 1-1/16" X 0.090", Washer; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", Idler, Washer; 17/32" X 1-1/16" X 0.090" (Lh Side), Washer; 17/32" X 1-1/16" X 0.090" (Use With (4) 19m7790), Washer; 17/32" X 1-1/16" X 0.090", (4 Used On Top Cap Screws; 2 Used On Bottom Cap Screws), Washer; 17/32" X 1-1/16" X 0.090" R.H., Washer; 13.487 X 26.975 X 2.286 mm (17/32" X 1-1/16" X 0.090"), Washer; (B) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (24 Used For 714, 714a; 28 Used For 716, 716a), Washer; (Rc And Hc), Washer; 17/32" X 1-1/16" X 0.090" (925 Flex Arg - 9 Used; 913-10 Used;915-12 Used; 918-14 Used; 920, 922-16 Used; 925, 930-22 Used; And 930 Flex Arg-20 Used), Washer; 17/32" X 1-1/16" X 0.090", (12 Used For 714, 714a; 14 Used For 716, 716a), Washer; (D: 3 M (120 In.)(10 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090" 9 Ft., Washer; (C: Part Of Ar109180 Adjustable Front Axle) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", 17 Teeth, Washer; 17/32" X 1-1/16" X 0.090", (750), Washer; 17/32" X 1-1/16" X 0.090" 178 mm (7") Dia., Washer; (A) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (Sub For Ffsb109341), Washer; .090"X17/32"X1-1/16", Washer; 17/32" X 1-1/16" X 0.090" (Sub 24h1853), Washer; 17/32" X 1-1/16" X 0.090", Washer; (A) 17/32" X 1-1/16" X .090", Washer; (C: 2.7 M (108 In.)(9 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; (B) (D) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0,090", Washer; (D) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (Sub For Mg87364), Washer; 17/32" X 1-1/16" X 0.090", (U/W Adj. Sieve), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; 13.487 X 26.975 X 2.286 mm, Washer; 17/32" X 1-1/16" X 0.090" Lh, Washer; 17/32" X 1-1/16" X 0.090" (Rigid), Washer; 17/32"X1-1/16"X.090", Washer; 17/32" X 1-1/16" X 0.090" 7 Ft., Washer; 13.487 X 26.975 X 2.286 mm (17/32" X 1-1/16" X 0.090"), Washer; 17/32" X 1-1/16" X 0.090", 6-Row Wide; 8-Row Narrow; And 12-Row, 22", Washer; 17/32" X 1-1/16" X 0.090" (Use With Adjustable Sieve), Washer; 17/32" X 1-1/16" X 0.090", At Hinge Pins, Washer; (A) (B) (E) 17/32" X 1-1/16" X 0.090" (900, 911), Washer; 17/32" X 1-1/16" X 0.090" 8 Ft., Washer; 17/32" X 1-1/16" X 0.090" 10 Ft., Washer; 17/32" X 1-1/16" X 0.090" (1 Used, Diesel; 3 Used, Gasoline), Washer; 17/32" X 1-1/16" X 0.090" 17/32" X 1-1/16", Washer; 17/32" X 1-1/16" X 0.090" (694) (Thru Unused Holes In Floor Sheets), Washer; (A) 17/32" X 1-1/16" X 0.090", R.H. Front, Outside End And L.H. Front, Outside End, Washer; 17/32" X 1-1/16" X 0.090", Washer; (A) 17/32" X 1-1/16" X 0.090", R.H. Front, Outside End, Washer; 17/32" X 1-1/16" X .090", Washer; (A: 2.1 M (84 In.)(7 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", 6-Row Wide, 8-Row Narrow And 12-Row - 22-Inch, Washer; X X 17/32" X 1-1/16" X .090", Washer; (A) (B) 17/32" X 1-1/16" X 0,090", Washer, Washer; 17/32" X 1-1/16" X 0.090", 8-Row Wide, Washer; 17/32" X 11/16" X .090", Washer; 17/32" X 1-1/16" X 0.090", (36 Used For 714, 714a; 42 Used For 716, 716a)	8
34***51	Spring Pin; 3/8" X 1-1/2", Spring Pin; 3/8" X 1-1/2" (L.H. Platform Support), Spring Pin; (A) 3/8" X 1-1/2", Spring Pin; 3/8"X1-1/2", Spring Pin; 3/8"X1/2", Spring Pin; 3/8" X 1-1/2", L.H.	1

See all parts with full part numbers in Heavy Parts AI →

Tongue Positioner Hydraulic Hoses

John Deere : 338 - Baler : Tongue Positioner Hydraulic Hoses

19***05	Cap Screw; (A: - Xxxxxx 467( - 31*00) 567( - 3150) 467s( - 3100)) 5/16" X 1" (1000 Rpm), Cap Screw; 5/16" X 1", Cap Screw; 7.925 X 25.400 mm, Cap Screw; (For (4) 24h1243), Cap Screw; 5/16" X 1" Rh, Cap Screw; 5/16" X 1", (Use With P50677), Cap Screw; 5/16" X 1", Hs, Sae 8, Cap Screw; 5/16"X1", Cap Screw; 5/16" X 1" (Hs, Sae 8) (Sub For R132456), Cap Screw; 5/16" X 1", (Hs, Sae 8)(Gas), Cap Screw; (A: - Xxxxxx 457( - 3100) 557( - 3150) 457s( - 31*00)) 5/16" X 1" (1000 Rpm), Cap Screw; 5/16" X 1", (Sub For Ffsb114668), Cap Screw; 5/16" X 1" (Hs, Sae 8), Cap Screw, Cap Screw; 5/16" X 1", (Use With Alternator Shield), Cap Screw; 5/16" X 1" (Hs, Sae 8) (Sub For Aw24189), Cap Screw; 5/16" X 1", (With Alternator Shield), Cap Screw; 5/16" X 1", Included In Ae53225 Lower Paddle Auger Kit; See Kit On Auger, Cap Screw; (A), Cap Screw; 5/16" X 1", (Dh-03, Gh-01), Cap Screw; (A) 5/16" X 1", (1000 Rpm), Cap Screw; 5/16" X 1", (Motorola), Cap Screw; 7.925 X 25.400 mm (5/16" X 1"), Cap Screw; 5/16" X 1" (Sub For N167650, This Application), Cap Screw; 7.925 X 25.400 mm (5/16" X 1") (Hs, Sae 8)	1
AH***24	Clip; Insulated, Clip, Clip; (Sub For R50454 Appl), Clip; To Secure Hoses, Clip; Cushioned	2
AN***26	Hydraulic Hose; 3/8" X 95", Hydraulic Hose; 3/4" X 2 413 mm (95") X 3/4" 3/4" X 2413mm X 3/4", Front, (Sub For Ty3023), Hydraulic Hose; 10 mm X 2.5 M (3/8" X 95"), Hydraulic Hose; (A) 3/4" X 2 413 mm (95") X 3/4", Hydraulic Hose; 3/4" X 2413 mm X 3/4", Hydraulic Hose; 3/4" X 2 413 mm (95") X 3/4", Hydraulic Hose; (A) 3/4" X 2413 mm (95") X 3/4" Front, (Sub For Ty3023, This Application), Hydraulic Hose; 9.53 mm X 2413 mm (3/8" X 95"), Hydraulic Hose; 3/4" X 2413 mm (95") X 3/4", Hydraulic Hose; 3/4" X 2413 mm (95") X 3/4" Front	2
BE***73	Complete Goods/Ship.; Nfs, Order Thru Complete Goods, Includes Parts On Additoinal Pages, Complete Goods/Ship.; Nfs, Order Thru Complete Goods, Includes Parts On Additional Pages	1

See all parts with full part numbers in Heavy Parts AI →

Tongue And Hitch

John Deere : 338 - Baler : Tongue And Hitch

11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	1
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	2
14***12	Nut; (C) 3/4", Nut; 3/4", Slotted, Nut; 3/4" 3/4" Slotted, Nut; (312), Nut; (D) (E) 3/4", Nut; 3/4", Slotted, Unc, Nut; 3/4" (Offset Pull-Type), Nut; 19.050 mm (3/4") Slotted, Nut, Nut; 3/4", Nut; 3/4", Use On Yoke With 3/4" Shaft, Nut; 3/4" Slotted, Nut; (A) 3/4", Nut; 3/4" 3/4" (Slotted), Nut; 19.050 mm (3/4")	1
19***33	Screw; 3/8" X 1-1/2" (Hs Sae 8), Screw; 9.525 X 38.100 mm (3/8" X 1-1/2"), Screw; 3/8" X 1-1/2" Sae 8; Low, Screw; 3/8" X 1-1/2", (Use With Ah66262), Screw; 3/8" X 1-1/2" 3/8 Unc-2a X 1 1/2 A17d Zn, Screw; 3/8" X 1-1/2" 3/8" X 1 1/2", Cap Screw; 3/8" X 1-1/2", Screw; (C: Code 1709 With Air Cleaner Mounting Pad) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" (D), Screw; 3/8"X1-1/2" For, 3179dl013, Screw; (B) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (1 Used L.H.) (1 Used R.H.), Screw; 3/8" X 1-1/2" Torque To 45 Lb-Ft (61 N-M), Screw; (A: Included In Ae48634) 3/8" X 1-1/2" For Use W/L.H. Gage Wheel Only, Screw; 3/8" X 1-1/2", (Use With Re61619), Screw; 9.525 X 38.100 mm, (Sae 8), Screw; 3/8" X 1-1/2" Hs, Sae 8, 3/8" X 1-1/2", Screw, Screw; 3/8" X 1-1/2" (Use With Re500917), Screw; 3/8" X 1-1/2" (A), Screw; (A) (B) 3/8" X 1-1/2" For Long Tooth Pickup Order H78421 Screw., Screw; 3/8" X 1-1/2", (Sae 8), Screw; 3/8" X 1-1/2" Sae 8, Cap Screw; 9.525 X 38.100 mm, Cap Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2" (Hs, Sae 8) (Sub For 19h1116), Screw; 3/8" X 1-1/2" (Dh-01, Dh-02, Gh-01, Gh-02, Hc-D, Hf-G), Screw; 3/8" X 1-1/2", (Use With 15h624), Screw; 3/8" X 1-1/2", (Code 1703), Screw; 3/8" X 1-1/2" (Sae 8), Low, Screw; 3/8" X 1-1/2" (Sae 8), Screw; 3/8" X 1-1/2", Hs, Sae 8, 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (2034), Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2", (Use With E95899), Screw; 3/8"X1-1/2" For, 3179dl004, Screw; 3/8"X1-1/2", (For 3179dl001), Screw; (Sub For R40808 Or R112876, This Application), Screw; Hs, Sae 8, 3/8" X 1-1/2", Cap Screw, Screw; 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2" (Hs, Sae 8), Screw; (Sub For R40808 Or R112876), Screw; 3/8"X1-1/2" (Sub For 19h1765, 19h1800), Screw; 9.525 X 38.100 mm, Screw; 3/8" X 1-1/2", Up, Screw; 3/8" X 1-1/2", (Hd-G), Screw; 3/8"X1-1/2" (Sub For 19h1765), Screw; 3/8" X 1-1/2", (Sub For 19h3385, This Application), Screw; 3/8" X 1-1/2", (Na-D, Na-G, Dn-01, Gn-01), Screw; 3/8" X 1-1/2", (Short Tongue), Screw; 3/8" X 1-1/2", (Gas), Screw; 3/8" X 1-1/2" (913, 915, -64*49, 3 Used) (915, 64*50-, 918, 920, 922, 924, 925, 930, 5 Used), Screw; 3/8" X 1-1/2" 3/8 Unc-2ax1/2 A17d Zn, Screw; 3/8" X 1-1/2", Low, Screw; 3/8" X 1-1/2", (Long Tongue), Screw; 3/8" X 1-1/2" (6081hh010), Screw; 3/8" X 1-1/2", (Ha-G, Ha-D, Ha-L, Hb-G, Hb-D, Hb-L, Hc-G, Na-D, Na-G, Na-L), Screw; 3/8" X 1-1/2" (For Re500917), Screw; 3/8" X 1-1/2" (Short Tongue), Screw; (C: Code 1703 Air Intake Short) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", Full Thread, (Sub For 19h2471), Screw; 3/8" X 1-1/2", For Use W/L.H. Pickup Gage Whl Only, Screw; 3/8" X 1-1/2" (Rigid), Screw; 3/8" X 1-1/2" (Sae 8) , Low, Screw; 3/8" X 1-1/2" (Hs, Sae 8), Screw; 3/8" X 1-1/2", (Hs, Sae 8), Screw; (A) 3/8" X 1-1/2", Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", Screw; 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", (For 3179dl016), Screw; 3/8"X1-1/2", (Sub For 19h1765), Screw; (Sub For R112876 Or R40808, This Application), Screw; 3/8" X 1-1/2", (Sub For T31783, This Application), Screw; 3/8" X 1-1/2", (1708), Screw; 3/8" X 1-1/2" (Long Tongue), Screw; 3/8"X1-1/2", For 3179dl001, Screw; 3/8" X 1-1/2" (Hs=10.9), Sae 8, Screw; 3/8" X 1-1/2" Incld With Engine, Screw; 3/8" X 1-1/2", (1703), Screw; (C) 3/8" X 1-1/2", Screw; 3/8"X1-1/2", For 3179dl016	2

See all parts with full part numbers in Heavy Parts AI →

Tractor Hookup (3-Joint Pin-Type)

John Deere : 338 - Baler : Tractor Hookup (3-Joint Pin-Type)

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	1
19***20	Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer)	1
AE***16	Cross And Bearing As; (Sub For E38064 Or Ae23517), Cross And Bearing As; (1000 Rpm), Cross And Bearing As, Cross And Bearing As; (A) (B) (C), Cross And Bearing As; (Sub For Aw12398 And Am2568e), Cross And Bearing As; (A), Cross And Bearing As; Cork, Cross And Bearing As; Spider And Bearing Assembly, Cross And Bearing As; Includes Jd7760, Cross And Bearing As; (A: Weasler Drive) (B: Neapco Drive), Cross And Bearing As; (B: Category 4), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760) Greaseable, Cross And Bearing As; (Sub For E38064, Ae23517 And Ae26166), Cross And Bearing As; Category 4, Cross And Bearing As; (Sub For E38064 And Ae23517), Cross And Bearing As; (Sub For Am2568e), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760), Cross And Bearing As; (Sub For Aw32447, This Application), Cross And Bearing As; (A)(B)(C), Cross And Bearing As; (A) (Sub For E38064, Ae23517 Or Am2568e), Cross And Bearing As; Use For Ah154738, Cross And Bearing As; (Category No. 4 Power Take-Off), Cross And Bearing As; (A) (B), Cross And Bearing As; Heavy Duty, Cross And Bearing As; (B) (C), Cross And Bearing As; (Sub For Am2568e Or Am2566e Or Bp12982 Or Bp13177) (540 Rpm), Cross And Bearing As; (Sub For Gdk82-17), Cross And Bearing As; (Sub For Grm006a), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760)Greaseable	2
AE***56	Yoke With Tube	1

See all parts with full part numbers in Heavy Parts AI →

Tractor Hookup (3-Joint Powr-Gard)

John Deere : 338 - Baler : Tractor Hookup (3-Joint Powr-Gard)

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	1
19***20	Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer)	1
34***86	Spring Pin; (A) 1/4" X 2", Spring Pin; 1/4" X 2", (Twin Swath), Spring Pin, Spring Pin; 1/4" X 2", Spring Pin; 1/4"X2", Spring Pin; 1/4" X 2", Per Tooth Bar, Spring Pin; 1/4" X 2", 540 Rpm, Spring Pin; 1/4" X 2" Model 8w, 10w, 10n And 12n, Spring Pin; 1/4" X 2" " (For Dc24381), Spring Pin; (A) (1 Used On 456)(2 Used On 556), Spring Pin; 1/4" X 2", Std, Spring Pin; 1/4" X 2", (4.3 M (14-Ft.) (4.9 M (16-Ft.) Platforms, Spring Pin; (A) 1/4" X 2", (Sub Aa21292), Spring Pin; (A: 446( - 13*93) 546( - 13*73)) 1/4" X 2" (1 Used On 446)(2 Used On 546), Spring Pin; 6.350 X 50.800 mm (1/4" X 2"), Spring Pin; 1/4" X 2", (For Adjustable Thread), Spring Pin; (A) 1/4"X2", Spring Pin; 1/4" X 2" (For Dc24381), Spring Pin; 1/4" X 2", (540 Rpm), Spring Pin; (A) (1 Used On 466)(2 Used On 566)	1
AE***16	Cross And Bearing As; (Sub For E38064 Or Ae23517), Cross And Bearing As; (1000 Rpm), Cross And Bearing As, Cross And Bearing As; (A) (B) (C), Cross And Bearing As; (Sub For Aw12398 And Am2568e), Cross And Bearing As; (A), Cross And Bearing As; Cork, Cross And Bearing As; Spider And Bearing Assembly, Cross And Bearing As; Includes Jd7760, Cross And Bearing As; (A: Weasler Drive) (B: Neapco Drive), Cross And Bearing As; (B: Category 4), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760) Greaseable, Cross And Bearing As; (Sub For E38064, Ae23517 And Ae26166), Cross And Bearing As; Category 4, Cross And Bearing As; (Sub For E38064 And Ae23517), Cross And Bearing As; (Sub For Am2568e), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760), Cross And Bearing As; (Sub For Aw32447, This Application), Cross And Bearing As; (A)(B)(C), Cross And Bearing As; (A) (Sub For E38064, Ae23517 Or Am2568e), Cross And Bearing As; Use For Ah154738, Cross And Bearing As; (Category No. 4 Power Take-Off), Cross And Bearing As; (A) (B), Cross And Bearing As; Heavy Duty, Cross And Bearing As; (B) (C), Cross And Bearing As; (Sub For Am2568e Or Am2566e Or Bp12982 Or Bp13177) (540 Rpm), Cross And Bearing As; (Sub For Gdk82-17), Cross And Bearing As; (Sub For Grm006a), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760)Greaseable	2

See all parts with full part numbers in Heavy Parts AI →

Tractor Hookup W/Plastic Shields (Weasler - Category 4) (Sliding Collar)

John Deere : 338 - Baler : Tractor Hookup W/Plastic Shields (Weasler - Category 4) (Sliding Collar)

19***20	Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer)	1
AE***16	Cross And Bearing As; (Sub For E38064 Or Ae23517), Cross And Bearing As; (1000 Rpm), Cross And Bearing As, Cross And Bearing As; (A) (B) (C), Cross And Bearing As; (Sub For Aw12398 And Am2568e), Cross And Bearing As; (A), Cross And Bearing As; Cork, Cross And Bearing As; Spider And Bearing Assembly, Cross And Bearing As; Includes Jd7760, Cross And Bearing As; (A: Weasler Drive) (B: Neapco Drive), Cross And Bearing As; (B: Category 4), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760) Greaseable, Cross And Bearing As; (Sub For E38064, Ae23517 And Ae26166), Cross And Bearing As; Category 4, Cross And Bearing As; (Sub For E38064 And Ae23517), Cross And Bearing As; (Sub For Am2568e), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760), Cross And Bearing As; (Sub For Aw32447, This Application), Cross And Bearing As; (A)(B)(C), Cross And Bearing As; (A) (Sub For E38064, Ae23517 Or Am2568e), Cross And Bearing As; Use For Ah154738, Cross And Bearing As; (Category No. 4 Power Take-Off), Cross And Bearing As; (A) (B), Cross And Bearing As; Heavy Duty, Cross And Bearing As; (B) (C), Cross And Bearing As; (Sub For Am2568e Or Am2566e Or Bp12982 Or Bp13177) (540 Rpm), Cross And Bearing As; (Sub For Gdk82-17), Cross And Bearing As; (Sub For Grm006a), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760)Greaseable	2
AE***73	Kit; Slide-Lock Repair (Includes Parts Marked (A)), Kit; (Use With Ae50407 Or Dc203052)Slide Lock, Kit; Safety Slide Lock Repair Includes Parts Marked (A) For 1-3/8 In 21 Spline Slide Lock, (Sub For Am100014), Kit; (Use With Ae50060) Slide Lock Collar; Includes Parts Marked (A), Kit; Includes Parts Marked (B) For 1 3/8" 21 Spline Slide Lock, Kit; For 1 3/8" 21 Spline, Kit; (Use With Ae54848) 1-3/8, Kit; Safety Slide Lock Repair (For 1-3/8"-21 Spline Slide Lock) (Sub For Am100014), Kit; (A: For 540 Rpm) (B: For 1000 Rpm), Kit; (A: For 540 Rpm (Ball Joint)) (B: For 1000 Rpm (Ball Joint)), Kit; 1-3/8 In. Auto Lock, Kit; Retaining, (Sub For M82068), Kit; For 1-3/8"-21 Spline Slide Lock, Kit; Ae54916 Yoke Repair, Kit; 540 Rpm; 1.38 - 1000 Rpm, Kit; (Use With Ae50407 Or Dc203052) Slide Lock, Kit; No.9 X 3/4", Kit; 1-3/8, Kit; Slide Lock Collar, Kit; (A) (B), Kit; For 1 3/8" 21 Spline Slide Lock, Kit; Locking Collar Repair, Kit; Slide Lock, Kit, Kit; (Sub For Am100014), Kit; Yoke Repair For Ae54916, Kit; (Use With Ae50060) Includes Parts Marked (A); Slide Lock Collar, Kit; 540 Or 1000 Sliding Collar, Kit; For 1-3/8" 21 Spline, Kit; (B) (C) 540 Or 1000 Sliding Collar, Kit; (Includes Parts Marked (A) Above), Kit; (Sub For Am100014) Safety Slide Lock Repair For 1-3/8" - 21 Spline Slide Lock, Kit; For 1 3/8" 21 Spline Slide Lock, Includes Parts Marked (B)	1
AE***15	Universal Joint Yoke; 540 Rpm, Sliding Collar, Universal Joint Yoke, Universal Joint Yoke; 540 Rpm, Universal Joint Yoke; (B) (C) 540 Rpm, Sliding Collar	1

See all parts with full part numbers in Heavy Parts AI →

Tractor Hookup W/Steel Shields (Weasler - Category 4) (Sliding Collar)

John Deere : 338 - Baler : Tractor Hookup W/Steel Shields (Weasler - Category 4) (Sliding Collar)

19***90	Screw; 1/2" X 3"	1
AE***16	Cross And Bearing As; (Sub For E38064 Or Ae23517), Cross And Bearing As; (1000 Rpm), Cross And Bearing As, Cross And Bearing As; (A) (B) (C), Cross And Bearing As; (Sub For Aw12398 And Am2568e), Cross And Bearing As; (A), Cross And Bearing As; Cork, Cross And Bearing As; Spider And Bearing Assembly, Cross And Bearing As; Includes Jd7760, Cross And Bearing As; (A: Weasler Drive) (B: Neapco Drive), Cross And Bearing As; (B: Category 4), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760) Greaseable, Cross And Bearing As; (Sub For E38064, Ae23517 And Ae26166), Cross And Bearing As; Category 4, Cross And Bearing As; (Sub For E38064 And Ae23517), Cross And Bearing As; (Sub For Am2568e), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760), Cross And Bearing As; (Sub For Aw32447, This Application), Cross And Bearing As; (A)(B)(C), Cross And Bearing As; (A) (Sub For E38064, Ae23517 Or Am2568e), Cross And Bearing As; Use For Ah154738, Cross And Bearing As; (Category No. 4 Power Take-Off), Cross And Bearing As; (A) (B), Cross And Bearing As; Heavy Duty, Cross And Bearing As; (B) (C), Cross And Bearing As; (Sub For Am2568e Or Am2566e Or Bp12982 Or Bp13177) (540 Rpm), Cross And Bearing As; (Sub For Gdk82-17), Cross And Bearing As; (Sub For Grm006a), Cross And Bearing As; (Includes (4) Bp12946 And Jd7760)Greaseable	2
AE***73	Kit; Slide-Lock Repair (Includes Parts Marked (A)), Kit; (Use With Ae50407 Or Dc203052)Slide Lock, Kit; Safety Slide Lock Repair Includes Parts Marked (A) For 1-3/8 In 21 Spline Slide Lock, (Sub For Am100014), Kit; (Use With Ae50060) Slide Lock Collar; Includes Parts Marked (A), Kit; Includes Parts Marked (B) For 1 3/8" 21 Spline Slide Lock, Kit; For 1 3/8" 21 Spline, Kit; (Use With Ae54848) 1-3/8, Kit; Safety Slide Lock Repair (For 1-3/8"-21 Spline Slide Lock) (Sub For Am100014), Kit; (A: For 540 Rpm) (B: For 1000 Rpm), Kit; (A: For 540 Rpm (Ball Joint)) (B: For 1000 Rpm (Ball Joint)), Kit; 1-3/8 In. Auto Lock, Kit; Retaining, (Sub For M82068), Kit; For 1-3/8"-21 Spline Slide Lock, Kit; Ae54916 Yoke Repair, Kit; 540 Rpm; 1.38 - 1000 Rpm, Kit; (Use With Ae50407 Or Dc203052) Slide Lock, Kit; No.9 X 3/4", Kit; 1-3/8, Kit; Slide Lock Collar, Kit; (A) (B), Kit; For 1 3/8" 21 Spline Slide Lock, Kit; Locking Collar Repair, Kit; Slide Lock, Kit, Kit; (Sub For Am100014), Kit; Yoke Repair For Ae54916, Kit; (Use With Ae50060) Includes Parts Marked (A); Slide Lock Collar, Kit; 540 Or 1000 Sliding Collar, Kit; For 1-3/8" 21 Spline, Kit; (B) (C) 540 Or 1000 Sliding Collar, Kit; (Includes Parts Marked (A) Above), Kit; (Sub For Am100014) Safety Slide Lock Repair For 1-3/8" - 21 Spline Slide Lock, Kit; For 1 3/8" 21 Spline Slide Lock, Includes Parts Marked (B)	1
AE***15	Universal Joint Yoke; 540 Rpm, Sliding Collar, Universal Joint Yoke, Universal Joint Yoke; 540 Rpm, Universal Joint Yoke; (B) (C) 540 Rpm, Sliding Collar	1

See all parts with full part numbers in Heavy Parts AI →

Tucker Fingers

John Deere : 338 - Baler : Tucker Fingers

03***68	Bolt; 3/8" X 1-3/4" Full Thread, Bolt; 3/8" X 1-3/4", Bolt, Bolt; 9.525 X 44.450 mm, Bolt; 3/8" X 1-3/4", Full Thread, Bolt; 3/8" X 1-3/4", Rd. Hd., Bolt; 3/8" X 1-3/4" Rh, Bolt; 3/8" X 1-3/4" (Rigid), Bolt; 3/8" X 1-3/4", W/Full Thread, Bolt; Sp, 3/8" X 1-3/4"	2
03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	2
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	1

See all parts with full part numbers in Heavy Parts AI →

Twine Box (Twine Baler) ( - 300000)

John Deere : 338 - Baler : Twine Box (Twine Baler) ( - 300000)

03***15	Bolt; 5/16"X2" (Sub For 03h2209), Bolt; 5/16" X 2" (For Sound-Gard Body), Bolt; 5/16" X 2", (For Sound-Gard Cabs), Bolt, Bolt; 5/16" X 2", Bolt; 5/16" X 2", Rd. Hd., Bolt; (A: Coded Items Are Used With The 714 mm (28-1/8") Angle.) 5/16" X 2", Bolt; 5/16"X2" (Sub For 03h2209 Appl)	1
03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	4
03***93	Bolt; 1/4" X 1/2" (Sub For 03h1626), Bolt; 1/4" X 1/2", Europe, Bolt; 1/4" X 1/2", Bolt; 1/4"X1/2"	1
03***72	Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 5/16" X 1/2", Bolt; (B) 5/16"X1/2", Bolt; 5/16" X 1/2", (3.7 M (12-Ft.), 9 Used Per Tooth Bar) (4.3 M (14-Ft.), 12 Used Per Tooth Bar) (4.8 M (16-Ft.), 12 Used Per Tooth Bar), Bolt; 5/16"X1/2", Bolt; 5/16" X 1/2", 9 Used, 3.7m (12 Ft); 12 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 5/16" X 1/2", Each Additional Tooth Bar, Bolt; 5/16" X 1/2", (Per Tooth Bar), Bolt; (Sub For Mg280616), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.), Bolt; 5/16" X 1/2" (215 And 216-1 Used; 218, 220, 222, And 224-2 Used; 230-4 Used), Bolt; 5/16" X 1/2" (Sub For 03h1607), Bolt; (C) 5/16" X 1/2", Bolt; (B) 5/16" X 1/2", Bolt; 5/16x1/2", Bolt, Bolt; (C) 5/16"X1/2", Bolt; 5/16" X 1/2" (915-1 Used; 918, 920, 922, 924 And 925- 2 Used; 930-4 Used), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7m (12-Ft.) (12 Used Per Tooth Bar, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; (A) 5/16" X 1/2", Bolt; X 5/16" X 1/2", Bolt; 5/16" X 1/2" (A), Bolt; 5/16" X 1/2", 9 Used Per Tooth Bar, 3.7 M (12-Ft.) 12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 5.0 M (16-Ft.)	4

See all parts with full part numbers in Heavy Parts AI →

Twine Box (Twine Baler) (300001 - )

John Deere : 338 - Baler : Twine Box (Twine Baler) (300001 - )

03***15	Bolt; 5/16"X2" (Sub For 03h2209), Bolt; 5/16" X 2" (For Sound-Gard Body), Bolt; 5/16" X 2", (For Sound-Gard Cabs), Bolt, Bolt; 5/16" X 2", Bolt; 5/16" X 2", Rd. Hd., Bolt; (A: Coded Items Are Used With The 714 mm (28-1/8") Angle.) 5/16" X 2", Bolt; 5/16"X2" (Sub For 03h2209 Appl)	1
03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	6
03***93	Bolt; 1/4" X 1/2" (Sub For 03h1626), Bolt; 1/4" X 1/2", Europe, Bolt; 1/4" X 1/2", Bolt; 1/4"X1/2"	1
03***72	Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 5/16" X 1/2", Bolt; (B) 5/16"X1/2", Bolt; 5/16" X 1/2", (3.7 M (12-Ft.), 9 Used Per Tooth Bar) (4.3 M (14-Ft.), 12 Used Per Tooth Bar) (4.8 M (16-Ft.), 12 Used Per Tooth Bar), Bolt; 5/16"X1/2", Bolt; 5/16" X 1/2", 9 Used, 3.7m (12 Ft); 12 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 5/16" X 1/2", Each Additional Tooth Bar, Bolt; 5/16" X 1/2", (Per Tooth Bar), Bolt; (Sub For Mg280616), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.), Bolt; 5/16" X 1/2" (215 And 216-1 Used; 218, 220, 222, And 224-2 Used; 230-4 Used), Bolt; 5/16" X 1/2" (Sub For 03h1607), Bolt; (C) 5/16" X 1/2", Bolt; (B) 5/16" X 1/2", Bolt; 5/16x1/2", Bolt, Bolt; (C) 5/16"X1/2", Bolt; 5/16" X 1/2" (915-1 Used; 918, 920, 922, 924 And 925- 2 Used; 930-4 Used), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7m (12-Ft.) (12 Used Per Tooth Bar, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; (A) 5/16" X 1/2", Bolt; X 5/16" X 1/2", Bolt; 5/16" X 1/2" (A), Bolt; 5/16" X 1/2", 9 Used Per Tooth Bar, 3.7 M (12-Ft.) 12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 5.0 M (16-Ft.)	2

See all parts with full part numbers in Heavy Parts AI →

Twine Knotter

John Deere : 338 - Baler : Twine Knotter

11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	1
11***82	Cotter Pin; 2.500 X 25 mm (0.098" X 0.984") (Sub For 11m7081), Cotter Pin; 2.500 X 25 mm, (Sub For 11h206), Cotter Pin; 2.500 X 25 mm, (Not Used W/ R70832), Cotter Pin; 2.500 X 25 mm (0.098" X 0.984"), Cotter Pin; 2.500 X 25 mm (Sub For 11h234, This Application), Cotter Pin; (A) (B) 2.500 X 25 mm, Cotter Pin; 2,5 X 25 mm, Cotter Pin; 2,5x20mm, Cotter Pin; 0.098" X 0.984", Cotter Pin; 2.500 X 25 mm, (Use With R47063), Cotter Pin; 2,5 X 25 mm (For P48769), Cotter Pin; 2.500 X 25 mm 6-Row, Cotter Pin; 2,5x25mm (Sub For 11h234), Cotter Pin; (C: (-Xxxxxx) 7600-00*26; 7700-0004; 7800-0003) 2.500 X 25 mm, Cotter Pin; (B), Cotter Pin; 2.500 X 25 mm, Cotter Pin; 2.500 X 25 mm, (Sub For 11m7081), Cotter Pin; 2.500 X 25 mm, (Sub For 11m7081), Cotter Pin; 2.500 X 25 mm, (Ru And Or), Cotter Pin; (B) 2.500 X 25 mm, Cotter Pin; 2.500 X 25 mm (Use With De18704 And De18705), Cotter Pin; 2.500 X 25 mm, Cotter Pin; 2.500 X 25 mm, (Sub For Et11497), Cotter Pin, Cotter Pin; 2.500 X 25 mm Upper, Cotter Pin; 2.500 X 25 mm, (Not Used W/ R70826), Cotter Pin; 2.500 X 25 mm, (Sub For Ch12317), Cotter Pin; 2.500 X 25 mm (A), Cotter Pin; (D: Up To Series 2109 (-Xxxxxx), 2111 (-Xxxxxx), 2113 (-0749), 2115 (-0725)) (E: Up To Series 2117 (-0735), 2122 (-0706), 2126 (-0710)) 2.500 X 25 mm, Cotter Pin; (B: Syncshuttle Transmission - 5425: Sn -1479, 5525: Sn -1531) 2.500 X 25 mm (Use With Re178498), Cotter Pin; 2.500 X 25 mm, (Sub For 11h234), Cotter Pin; (A) 2.500 X 25 mm, (Sub For 11h234), Cotter Pin; (B: Syncshuttle Transmission - 5225: Sn -1288, 5325: Sn -13*74) 2.500 X 25 mm (Use With Re178498)	1
14***35	Nut, Nut; 5/16" (Sub For 14h511), Nut; 5/16"	1
14***74	Screw; M10, (Use With 19m7668), Screw; M10 108 Used ;14'(4.3 M), 123 Used ;16'(4.9 M), 143 Used; 18'(5.5 M), Screw; (A) M10, (Sub For Et11535), Screw; (D: 21" X 7" X 12" 16pr Tire) M10, Screw; (A) (B) (C) (D) M10, Screw; M10, 6-Row Wide, 8-Row Narrow, 8-Row Wide And 10-Row Narrow, Screw; 10mm, Screw; M10 Rockshaft Rows, Screw; (C: For 8-Row Narrow) M10, Screw; M10 (Para L113893), Screw; 10 M, Screw; (A: Viscous Drive Lock-Up) M10, Screw; (A: Used In 5415 Orchard And 5415hc Tractors Too) (B: Used In 5615hc Tractor Too) (C: Used In 5715hc And 5715 Orchard Tractors Too) M10, Screw; (B: Low Profile Cab) M10, Screw; M10, (Sub 19m7382), Screw; (Sub For Ch12390), Screw; M10, (Use With Re19187 Or Re42730), Screw; M10, (Sub For 14m7140, This Application), Screw; M10 Rh, Lh, Nut; M10, (Sub For 06*13), Screw; (A: For 4-Row) M10, Screw; M10, (Hs Sae 8), Screw; (D: Heavy Duty Gudgeon W/3" Pin) M10, Screw; M10 (C), Screw; M10 (Also Order 15h624), Screw; (C: 5625 ( -0072), 5725 ( -0013)) M10, Nut; (Sub For Ffsb107411), Nut; M10, Nut; (Sub For J231210), Screw; (A: 18 Used On 1550mm (61") Bucket; 24 Used On 1850mm (73") Bucket), Screw; (A: For Tractor With 3 Steps, On The Left And On The Right) M10, Screw; (A: For 8-Row Narrow) M10, Screw; M10, (Sub For 14m7274, This Application), Screw; (Alt. Shield And Alt. To Alt. Bracket), Screw; M10, (D) (E), Screw; M10, (Use With Re31694), Screw; M10 Used On Rigid Euro For 918, 920, 922 And 925, Screw; M10 M10 (For L113893), Nut; (Sub For J950010), Screw; (A: Note; 9550 (7001- ) 9550sh (7001- )) M10, Screw; M10, (Use With Re19187), Screw; M10, (10), Screw; (B: Not On Bearing) M10, Screw; M10 Used With Deflector Only, Nut; M10, (Sub For Ffsb107411), Screw; 10x1,5mm, Screw; (A: Only For Germany) M10, Screw; M10, (Code 3108, 3109 And 3130), Screw; (A: Only For 1.8 M Pickup) M10, Screw; (C: ( -Xxxxxx) 7610-0059 ; 7710-0056 ; 7810-0068) M10, Screw; (B: Straddle Mount/Isolated Open Operator Station) M10, Screw; M10 (A), Screw; Battery Terminal, Screw; (B: 5615: 0021- And 5715: 0120-) M10, Screw; M10 (Use With Kv26113), Screw; (B: For 6-Row Narrow, 6-Row 70 cm And 6-Row Wide) M10, Screw; M10 Rear, Screw; (A: Viscous Drive Lockup) M10, Screw; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) M10, Screw; M10 (Sub For 4637 Or 0313), Screw; M8, Screw; M10 M10 X 1, 5, Screw; (A: Fourth Step Option) M10, Screw; (C: For 12-Row Narrow (22-Inch)) M10, Screw; M10 (Battery Terminal), Screw; (A) M10, (Sub For Ch18389), Screw; (A: With Extra Hydraulic Oil Reservoir) M10, Screw; (A: Cis Version) M10 (8310, 8410), Screw; M10 Lh, Rh, Screw; M10 (Sub For Er022119 Appl), Screw; M10 (For Al110920), Screw; M10, Code 3111, 3114, 3140 And 3142, Screw; (K) M10, Screw; (B), Screw; (A: (-Xxxxxx) Sgb 0057; Rg -0081) M10, Screw; M10 L.H., Screw; M10 9000, Screw; (E) M10, (Use With Re19187), Screw; M10 (132", -6874; 154", -6809), Screw; M10 Sub For 14m7039 And 14m7060, Screw; (D: (Xxx- ) 8560-0001;8760-0001;8960-0001) M10, Screw; M10 (Use With Re198656), Screw; M10 (Heavy Duty), Screw; (A: With Net Wrapping) M10, Screw; M10 (Use (2) For 2 Function Icv, (3) For 3 Function Icv), Screw; M10 (Sub For R73639), Screw; M10 (Sub For Er022118 Appl), Screw; (B: Use With Ar93448) M10, Screw; (C: For 8-Row Narrow, 8-Row 70 cm And 8-Row Wide) M10, Screw; M10, (2 Per Tine), Screw; (A: With Net Coveredge) M10, Screw; M10 (Sub For J231210), Screw; (C: For 12-Row Narrow) M10, Screw; M10, M18x1,5, Screw; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M10, Screw; (C: For 12-Row Narrow And 12-Row, 70 cm) M10, Screw; M10 (10), Screw; M10, When Using Dry Fertilizer Only, Screw; (H: 21" X 7" X 12" 16pr Tire) M10, Screw; (A: Cx - 5 Bolt Pattern) (B: Hx - 4 Bolt Pattern) (C: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; M10 (493, 1290 And 1291), Screw; (H: M10, Used With Deflector Only) M10, Screw; M10, (Delco-Remy), Screw; M10 (For Dc212852), Nut; M10, (Sub For Ffsb106074) (Sub For 14m7294), Screw; M10 Sub For J950010, Screw; (A: (-Xxxxxx) (Sgb) 7600-0057; 7700-0089; 7800-0114) (C: (-Xxxxxx) (Rg) 7600-0081; 7700-0133; 7800-0145) M10, Screw; M10 (D), Screw; M10 Not On Bearing, Screw; (D) (E) M10, Screw; (A: Parts Not Used On Balers With Bale Trak Plus Monitor) M10, Screw; (A: Option) M10, Screw; M10, (Delco Remy), Screw; M10 Lh, Screw; M10 X 1.5, Screw; M10 (For Dc22679) (Sub For 14h846), Screw; M10 (For Al119373), Screw; (C: For Electronic Wrapping Control Plus) M10, Screw; M10, (For Rows Five And Eight), Screw; M10 (Not Illustrated), Screw, Screw; (D: Used With Deflector Only) M10, Screw; M10 (Hi-Crop), Screw; (C: 5303 (0008- ), 5403 (0043- ), 5503 (0001- ).) M10, Screw; M10, (Sub Cj17261), Screw; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M10, Screw; M10 (Use With Delco-Remy), Screw; M10 6-Row, 36-, 38- And 40-In.; 8-Row, 30-In.; 8-Row, 70 cm; 8-Row, 36-, 38- And 40-In.; 10-Row, 30-In., Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, This Application) Copper, Cuivre, Kupper, Rame, Cobre, Koppar, Screw; M10 (B) (C) (D), Screw; (A: With Creeper Transmission) M10, Screw; M10 9 Used On 335, 11 Used On 375, Screw; (B: For 6-Row Narrow, 6-Row 70 cm, 6-Row Wide And 8-Row Wide Skip-Row) M10, Screw; M10 (Sub For 4463), Screw; M10, (Saran Cd), Screw; (B: With Cab) M10 (Sub For Er022119 Appl), Screw; (B: Low Profile) M10, Screw; M10x1,5, Screw; M10 (For Rows Five And Eight), Screw; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M10, Screw; M10, (Use With Code 3103, 3105, 3106), Screw; M10 (Sub For 0703), Screw; (A: For Tractor With 2 Steps, On The Left And On The Right) M10, Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, R127288, This Application) Copper, Cuivre, Kupper, Rame, Cobre, Koppar, Screw; (A: For North America Only) M10, Screw; (C), Screw; (B: Oos Tractors) M10, Screw; M10, (Battery Terminal), Screw; M10, (Sub For Ch13637), Screw; (C: Viscous Drive Lock-Up) M10, Screw; (B: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; (A) 10mm, Screw; M10 (Sub For 14h1076), Screw; (B: With Creeper Transmission) M10, Screw; (A: Fuel Tank (30.6 Gallon )) M10, Screw; (A: For 8-Row Wide Skip-Row) M10, Screw; M10, (Sub For (2) Mg508083) Hex, Nut; M10, (Use With T127169), Screw; (A: For 1, 81 Meter Pickup) M10, Screw; (Sub For R140624), Screw; M10x1.5, Screw; M10 (For Cc22210), Screw; (C: W/O Hitch) M10, Screw; M10 Sub For 14m7148, Screw; (C: 5303 ( -0007), 5403 ( -0042).) M10, Screw; (A: With Hydraulic Cab Suspension (Hcs)) M10, Screw; (A: Only For 2.0 M Hiflow Pickup) M10, Screw; M10 (For Dc54470), Screw; (A) (B) M10, Screw; (A: Without Cab) M10 (Sub For Er022119 Appl), Screw; M10 (Sub For Er022118, Appl), Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R127288, R129609, This Application) Copper, Cuivre, Kupfer, Rame, Cobre, Koppar, Screw; (B: Hx - 4 Bolt Pattern) (E: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) M10 (With Extendible Dipperstick), Screw; M10, In Air Duct, Screw; (C) M10, Screw; (B: For 8-Row Wide) M10, Screw; (A) M10, M10, Nut; M10, (Torque 23lb.Ft), Screw; M10, (Sub For W33464), Screw; (A: Only For 2, 0 M Hiflow Pickup) M10, Screw; (A: For 25 Knives Only) M10, Screw; M10 M10, Screw; (A: With Work Light (Sg2)) M10, Screw; (A: With 12v, 110ah Battery) M10, Screw; (A: Required For Field Conversion To Diverter Valve On Independent Marker System) M10, Screw; (Sub For Ch13637), Screw; M10 (Sub For 0908), Screw; M10 (Use With (2) Kv22510), Screw; M10 Hs=10, Screw; M10 (Saran Cd), Screw; (Sub For T111619), Screw; M10, (Sub For (3) Mg508083), Screw; M10, (5420, 5440), Screw; M10, (Sub For Ch12390), Screw; (A), Screw; (A: Also For Tractors W/O Front Loader From Serial No. Xxxxxx) M10, Screw; M10, 3101, 3106, Screw; M10, Used With Deflector Only, Screw; M10 (Sub For J950010), Nut; M10, (Sub For J950010), Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) M10, Nut; (Sub For Ffsb106074) (Sub For 14m7294), Screw; M10, (Sub For Ch18389), Screw; (A: For 6-Row Narrow And 6-Row Wide) M10, Screw; (B) M10, Screw; M10 Jds118, Screw; (B: (Xxxxxx- ) 8560-0043; 8760-0019; 8960-0061) M10, Screw; (B: 2 Used Per Tine) M10, Nut; (Sub For M520010), Screw; M10 (10 Used 435; 14 Used 535), Nut, Screw; M10, (Use (2) For 2 Function Icv, (3) For 3 Function Icv), Screw; M10 (Sub For J590010), Screw; M10 (Sub For Th0432902 ) (Sub For 0402), Screw; M10, Up, Screw; (A: With Air Trailer Brake System) M10, Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, This Application) Copper, Cuivre, Kupfer, Rame, Cobre, Koppar, Screw; M10 (For Dc54470, Dc212852), Screw; M10 (Use With Re173973), Screw; (A: For 14 Knives Only) M10, Screw; (A: No Longer Required) M10, Screw; M10 (2 Per Tine), Screw; (A: ( -Xxxxxx) 8560-0042; 8760-0018; 8960-0060) M10, Screw; M 10, Screw; M10, For Dry Fertilizer, Screw; (A: From Sr.No 5310s(0084- ), 5410 (0019- ), 5610 (00**01- ).) M10, Screw; M10 (M10), Screw; M10, Screw; (A) M10, Screw; M10 (For L113893), Screw; (A: With Autopowr Transmission) M10, Screw; (B: Viscous Drive Lock Up) M10, Screw; (B: For 8-Row Narrow And 8-Row Wide) M10, Screw; M10, M10, Screw; (A: For 4-Row And 6-Row Wide Skip-Row) M10	1

See all parts with full part numbers in Heavy Parts AI →

Wagon Hitch

John Deere : 338 - Baler : Wagon Hitch

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	6
03***99	Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)	2
03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	6
03***91	Bolt; 1/2" X 2-1/4" (Use With 14h1040 And 12h301), Bolt; 12.700 X 57.150 mm, Bolt; 1/2" X 2-1/4", Bolt; (A) (D) 1/2" X 2-1/4", Bolt; 1/8" X 2-1/4"	2

See all parts with full part numbers in Heavy Parts AI →

Wagon Hitch, Center Telescoping W/ Bale Chute Extension, Attachment

John Deere : 338 - Baler : Wagon Hitch, Center Telescoping W/ Bale Chute Extension, Attachment

BE***65	Complete Goods/Ship.; Includes Be21895, Be21896, Be22066	1
BE***66	Complete Goods/Ship.	1
BE***95	Complete Goods/Ship.; Order Thru Complete Goods - Support, Complete Goods/Ship., Complete Goods/Ship.; Order Thru Complete Goods, Includes Key 21, Complete Goods/Ship.; Order Thru Complete Goods, Wagon Hitch Support, Also Contained In Be22065 And Be22074, Complete Goods/Ship.; Order Thru Complete Good, Part Of Be22065	1
BE***96	Hitch	1

See all parts with full part numbers in Heavy Parts AI →

Wagon Hitch, Center Telescoping W/ Support, Attachment

John Deere : 338 - Baler : Wagon Hitch, Center Telescoping W/ Support, Attachment

BE***74	Complete Goods/Ship.; Includes Be21895, Be21896	1
BE***95	Complete Goods/Ship.; Order Thru Complete Goods - Support, Complete Goods/Ship., Complete Goods/Ship.; Order Thru Complete Goods, Includes Key 21, Complete Goods/Ship.; Order Thru Complete Goods, Wagon Hitch Support, Also Contained In Be22065 And Be22074, Complete Goods/Ship.; Order Thru Complete Good, Part Of Be22065	1
BE***96	Hitch	1

See all parts with full part numbers in Heavy Parts AI →

Wheels

John Deere : 338 - Baler : Wheels

11***21	Cotter Pin; 4 X 25 mm (A) (B), Cotter Pin; 4 X 25 mm, (Use With S1728m), Cotter Pin; 4 X 25 mm, Cotter Pin; (A: Also Use With Fi Kit Mn10741) 4 X 25 mm, Cotter Pin; (H) 4 X 25 mm, Cotter Pin; 4 X 25 mm, (Nla), Cotter Pin; 4 X 25 mm, (Next To Feed Cup), Cotter Pin; 5/32"X1", Cotter Pin; 5/32"X1" (Sub For 11h239), Cotter Pin; 4 X 25 mm (A), Cotter Pin; 4 X 25 mm (Feed Cup), Cotter Pin; 4x25mm (Sub For 11m1393), Cotter Pin; 4 X 25 mm 4x26 mm, Cotter Pin; 4 X 25 mm, (Sub For 11h230), Cotter Pin; 4 X 25 mm (B), Cotter Pin; (A: United Kingdom, France, Germany And Sweden) 4 X 25 mm, Cotter Pin; 4 X 25 mm (Next To Feed Cup), Cotter Pin; (A) 4x25mm (Sub For 11h239), Cotter Pin; (Sub F2600916), Cotter Pin; 4 X 25 mm, (Next To Feed Cups), Cotter Pin; 4 X 25 mm R.H., Cotter Pin; (C: Next To Feed Cup) 4 X 25 mm, Cotter Pin; (D) 4 X 25 mm, Cotter Pin; 4 X 25 mm (Sub For Ch17103), Cotter Pin; 4 X 25 mm 5/32"X1", Cotter Pin; 4 X 25 mm Sub For 11m7028, Cotter Pin; 4x25, Cotter Pin; (D: (Xxxxxx- ) 7600-00*27; 7700-0005; 7800-00**04) 4 X 25 mm, Cotter Pin; W/ Telescopic Draft Links, Cotter Pin; 4 X 25 mm, (Australia And New Zealand Only), Cotter Pin; 4 X 25mm, Cotter Pin; (C: United Kingdom, France, Germany And Sweden) 4 X 25 mm, Cotter Pin; 0.157" X 0.984", Cotter Pin; 4x25mm (Sub For 11h239), Cotter Pin; 4 X 25 mm, (Sub For 11h239), Cotter Pin; 4x28mm, Cotter Pin; (A) 0.157" X 0.984", Cotter Pin; 4 X 25 mm 4 X 25 mm, Cotter Pin; 4 X 25 mm, (Use With B2045m), Cotter Pin; (C) 4 X 25 mm, Cotter Pin; 4 X 25 mm M4x28 Zn, Cotter Pin, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 25 mm, Cotter Pin; (312) 4 X 25mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 25 mm, R.H., Cotter Pin; 4 X 25 mm M4 X 20	1
11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	1
14***75	Nut; 7/8", Slotted, Nut; 7/8", Use On Yoke With 7/8" Shaft, Nut; 7/8", Nut, Nut; (B) Lh, Nut; Lh, 7/8", Nut; L.H., Nut; 7/8" (Ref. 7/8") Lh, Nut; (F: Incld In Cb01488227 & Cb01488228 Tie Rod Groups) 7/8", Nut; 7/8" 7/8", Nut; 7/8" L.H., Nut; Sp, 7/8", Nut; 7/8", Slotted, L.H., Nut; 7/8" (A) (B), Nut; 7/8", L.H., Nut; 7/8", Unf, Nut; 7/8" Slotted, Titn To 250 Ft-Lb., Nut; (A: 8520 (02***33- )) 7/8", Nut; 7/8", For 610, Nut; 7/8", Unf,, Nut; 7/8" Slotted, Nut; 7/8", For 810, Nut; (B) 7/8", Nut; 7/8", Castellated, Nut; (A) 7/8", Slotted, Nut; 7/8", Slotted, Unf	1

See all parts with full part numbers in Heavy Parts AI →

Wire Boxes (6 Roll) (Wire Baler) (Xxxxxx - )

John Deere : 338 - Baler : Wire Boxes (6 Roll) (Wire Baler) (Xxxxxx - )

14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	5
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	13
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	4
AE***71	Side Wall	1

See all parts with full part numbers in Heavy Parts AI →

Wire Boxes (Wire Baler) ( - Xxxxxx)

John Deere : 338 - Baler : Wire Boxes (Wire Baler) ( - Xxxxxx)

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2
19***48	Cap Screw; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" X 3/4" (E), Cap Screw; (A) (C) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" Monitor Box To Baler, Cap Screw; 3/8" X 3/4" (38"), Cap Screw; 3/8" X 3/4", Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4" (Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55714, Re63364), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02, Hc-D), Cap Screw; 3/8" X 3/4" (Dh-01, Dh-02 And Dn-03), Cap Screw; 3/8" X 3/4", (With Iron-Gard), Cap Screw; 3/8" X 3/4" (Rigid), Cap Screw; 3/8" X 3/4", (Hs, Sae 8), Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Cap Screw; 3/8" X 3/4" (Hs, Sae 8) Sweden Only, Cap Screw; 3/8" X 3/4" Torque To 36 Lb-Ft (49 N-M), Cap Screw; 3/8" X 3/4", (Sub For 19h1134, This Application), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00*13; 8650-00*23) 3/8" X 3/4", Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 3/4", Cap Screw, Cap Screw; 3/8" X 3/4" (Use With Ar70376), Cap Screw; 3/8" X 3/4", U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" (A) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" U/W Steel Or Plastic Shields, Cap Screw; 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs, Sae 8), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Use With H108673), Cap Screw; 3/8" X 3/4", (Code 6205), Cap Screw; 3/8" X 3/4", (Ear Corn), Cap Screw; 3/8" X 3/4" 3/8"X3/4", Cap Screw; 3/8" X 3/4" (A), (38"), Cap Screw; (A) 3/8" X 3/4" 3/8" X 3/4", Cap Screw; 3/8" X 3/4", Sweden Only, Cap Screw; 3/8" X 3/4", (Use With Ae57756), Cap Screw; 3/8" X 3/4" Torque To 45 Lb-Ft(61 N-M), Cap Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Cap Screw; 3/8" X 3/4", Monitor Box To Baler, Cap Screw; 3/8" X 3/4", (Use With Re30427), Cap Screw; 9.525 X 19.050 mm, Cap Screw; 3/8" X 3/4", (3 Used 12 Ft., 6 Used 15 Ft.) (Hs, Sae 8), Cap Screw; 3/8" X 3/4" (Sae 8, For Re55924, Re63363), Cap Screw; 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Hd-G), Cap Screw; 3/8" X 3/4", (Hb-G, Gh-01), Cap Screw; 3/8" X 3/4", (Includes T13213 And T20098 And 15h624 And 15h665), Cap Screw; 3/8" X 3/4", Use With Steel Or Plastic Shields, Cap Screw; (A) 3/8" X 3/4" (Hs, Sae 8), Cap Screw; (B) 3/8" X 3/4", Cap Screw; 3/8" X 3/4" (Hs=10.9), Sae 8, Cap Screw; 3/8" X 3/4" (Ear Corn), Cap Screw; 3/8" X 3/4" (30"), Cap Screw; 3/8" X 3/4", Cylinder Head,Culasse,Zylinderkopf, Testata Del Motore,Culata,Cylindertopplock, Cap Screw; 3/8" X 3/4" (Sub For 19h1134, This Application), Cap Screw; 3/8" X 3/4" (A), Cap Screw; 3/8" X 3/4", (Ea-G, Ea-D, Ha-G, Ge-01, De-01), Cap Screw; 3/8" X 3/4", (4-Rrc), Cap Screw; 3/8" X 3/4" Hs=10.9, Cap Screw; 3/8" X 3/4", (Sae 8)	0
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	0

See all parts with full part numbers in Heavy Parts AI →

Wire Guides

John Deere : 338 - Baler : Wire Guides

03***68	Bolt; 3/8" X 1-3/4" Full Thread, Bolt; 3/8" X 1-3/4", Bolt, Bolt; 9.525 X 44.450 mm, Bolt; 3/8" X 1-3/4", Full Thread, Bolt; 3/8" X 1-3/4", Rd. Hd., Bolt; 3/8" X 1-3/4" Rh, Bolt; 3/8" X 1-3/4" (Rigid), Bolt; 3/8" X 1-3/4", W/Full Thread, Bolt; Sp, 3/8" X 1-3/4"	2
03***95	Bolt; 3/8"X1-1/2", Bolt; 3/8"X1-1/2" (Sub For 03h1468), Bolt; 3/8" X 1-1/2" (Use With H127801), Bolt; 3/8" X 1-1/2", (22 Used On 18', 26 Used On 21' And 25' And 30 Used On 30'), Bolt; 3/8" X 1-1/2", (16 Used On 15' And 18', 20 Used On 21' And 25', 24 Used On 30'), Bolt; 3/8" X 1-1/2" (L.H. End - 4 Used; R.H. End - 2 Used, 1st And 4th Holes), Bolt; 3/8" X 1-1/2" (Rh), Bolt; 9.525 X 38.100 mm (3/8" X 1-1/2"), Bolt; 3/8" X 1-1/2", (40-Foot Boom), Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2" (Rigid), Bolt; 3/8" X 1-1/2" (Bolted Sections), Bolt; 3/8" X 1-1/2", (6 Used For 660, 8 Used For 680), Bolt; 3/8" X 1-1/2" Repair Kit, Bolt; 3/8"X1-1/2" (Sub For 03h1468 Appl), Bolt; 3/8" X 1-1/2" Lh, Bolt; 3/8" X 1-1/2", (Variable Drive)	6
03***00	Bolt; 3/8" X 1", Round Head, Bolt; Ar, 3/8"X1", Bolt; 3/8" X 1" (W/ Ae29863 Or Dc17829), Bolt; 3/8" X 1", No. 20 Hitch, Bolt; 3/8" X 1" (Posi-Torq), Bolt; 3/8" X 1" (W/ E19709), Bolt; 3/8" X 1" (W/ Dc18663 Or Dc18661), Bolt; X 5/16" X 5/8", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8" X 1", Bolt; 3/8" X 1", (Kit Ae36514, 484) (Kit Ae36515, 483), Bolt; 3/8" X 1", (Use With An202626), Bolt; 3/8" X 1", (327, 336, 337, 346 And 347 Balers), Bolt; 3/8" X 1", (12, 15 And 18 Ft. With Conditioner), Bolt; 3/8"X1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8"-16 Nc X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (28 Used For 660, 32 Used For 680), Bolt; 3/8" X 1" (Use With H84412), Bolt; 3/8" X 1" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; 3/8" X 1" (Sub 03h1463), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (913-14 Used; 915-16 Used; 918-20 Used; 920-22 Used; 922-25 Used; 924-26 Used; 925-28 Used; And 930-34 Used), Bolt; 3/8" X 1" (W/ E42578), Bolt; 3/8" X 1", (10 Maximum), Bolt; 3/8" X 1", For 3.7 M (12') Size, Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (W/ E42578, E56101), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" (Sub For 03h1765), Bolt; 3/8"-16 Unc X1", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X 3/8" X 1" (Sub For 19h1900), Bolt; 3/8" X 1" (C), Bolt; 3/8" X 1", Unc, Bolt; (B: (Xxxxxx- ) Serial No. 8450-00*19; 8650-0098) 3/8" X 1", Bolt, Bolt; 3/8" X 1", (336 And 346 Balers), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (213-14 Used; 215-16 Used; 216-17 Used; 218-20 Used; 220-22 Used; 222-25 Used; And 224-26 Used), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1", Use With E78564, Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (700), Bolt; 3/8" X 1" (W/ E42578 Or E56101), Bolt; 3/8" X 1" L.H., Bolt; 3/8" X 1" R.H. (930), Bolt; 3/8" X 1", Roll Top, Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" 18', 20' (28 Used, 36 Used), Bolt; (B) 3/8"X1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" (W/ E42578) Key 3, Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1" (Use With N10215), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1" (Use With Fixed Ladder), Bolt; (W) 3/8" X 1", Bolt; 3/8" X 1" R.H., Bolt; 3/8" X 1", (3 Used-443, 444, 543; 6 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243), Bolt; 3/8" X 3/4", Bolt; (C: 42" Tire) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312 Or Ae29863), Bolt; 3/8" X 1", For 4.6 M (15') Size, Bolt; 3/8" X 1", For 3.0 M (10') Size, Bolt; (Ou)3/8"X1", Bolt; 3/8" X 1" (28 Used, 18'; 36 Used, 20'), Bolt; 3/8" X 1" (Rigid), Bolt; 3/8" X 1" (W/ E19709) (Sub For 10h1026), Bolt; 3/8" X 1", Sweden Only, Bolt; 3/8" X 1" (Welded To Tank), Bolt; 3/8" X 1", (Level Land), Bolt; 3/8" X 1" (6 Used. Rh, 5 Used, Lh), Bolt; 3/8" X 1" Attach Hose To Shield Linkage Side Plates, Bolt; 3/8" X 1", (2 Used On Each Side), Bolt; 3/8" X 1" (336 And 346 Balers), Bolt; 3/8" X 1" (3 Used - 443, 444; 6 Used - 546, 643, 644, 645, 843; 14 Used - 844 And 1243), Bolt; 9.525 X 25.400 mm, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8" X 1"	4
03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	4

See all parts with full part numbers in Heavy Parts AI →

Need a specific 338 - BALER part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.