John Deerewindrower, platform(no series)

John Deere 240 - WINDROWER, PLATFORM

OEM parts breakdown

Search live 240 - WINDROWER, PLATFORM parts Source or supply its parts

Post a parts request and compare supplier quotes.

The John Deere 240 is a skid steer manufactured from 1999 to 2004 with 53.0 HP.

All 240 - WINDROWER, PLATFORM assemblies by section

Every catalogued assembly group for the John Deere 240 - WINDROWER, PLATFORM. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Auger And Drive [B03]

John Deere : 240 - Windrower, Platform : Auger And Drive [B03]

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	6
03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	8
03***29	Bolt; 5/8" X 2-1/4" (Use With 12h294 And 14h1039), Bolt; (C: For 390 Mower) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4" (Sub For 03h1856), Bolt; 5/8"X2-1/4", Bolt; 5/8" X 2-1/4" (844,61*46-; 1243,62*77-)	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1

See all parts with full part numbers in Heavy Parts AI →

Auger Slip Clutch [B02]

John Deere : 240 - Windrower, Platform : Auger Slip Clutch [B02]

03***57	Bolt; 1/2"X3-1/2", Bolt; (A) 1/2" X 3-1/2", Bolt; 1/2" X 3-1/2", Bolt; 1/2" X 3-1/2" (1/2" X 4" Required With Feed Roll Pan), Bolt; 1/2" X 3-1/2" (Required With Feed Roll Pan)	8
24***54	Washer; 17/32" X 1-1/8" X 0.105", (Kit An193805), Washer; 11/16"X1-1/4", Washer; 17/32" X 1-1/4" X .105", Washer; 17/32" X 1-1/8" X 0.105" (A), Washer; 17/32" X 1/8" X 0,105", Washer; 17/32" X 1-1/8" X 0.105", (Sidehill), Washer; (B) 17/32" X 1/8" X .105", Washer; (A) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X .105", Washer; .105" X 17/32" X 1-1/4", Washer; 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With 19h1820), Washer; 17/32"X1-1/18"X.105", Washer; 17/32"X1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105" (30"), Washer; (A) 17/32" X1/8" X .105", Washer; (A) (D) (E) (F) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105" 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With An190565 And An190941), Washer, Washer; 13.487 X 28.575 X 2.667 mm (17/32" X 1-1/8" X 0.105"), Washer; 17/32" X 1-1/8" X.105", Washer; 11/16x1-1/4", Washer; 17/32x1 1/8", Washer; (A) (B) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Level Land), Washer; X, Washer; (A) (E) (F) (G) 17/32" X 1-1/8" X 0.105", Washer; (A) 17/32" X 1/8" X .105", Washer; 17/32" X 1-1/8" X 0.105", (4 Used), (6 Used, Wide Gauge Shoes), Washer; (A: ( -Xxxxxx) Serial No. 8450-00*18; 8650-00*97) 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8", Washer; 17/32" X 1-1/8" X .105" (Sidehill), Washer; 17/32" X 1-1/8" X .105" (Level Land), Washer; 17/32" X 1-1/8"X.105", Washer; (B), Washer; 17/32" X 1-1/8" X 0.105", (3.7 M (12-Ft.) Platform, Less Conditioner), Washer; 13,5 X 28,57 X 2,5 mm, Washer; 17/32" X 1-1/8" X 0.105", (Kit An193804), Washer; 17/32" X 1-1/8" X .105" (Sub For 12h301), Washer; (B) 17/32"X1/8"X.105"	8
AE***49	Hub, Hub; (A)	1
E8***48	Compression Spring; (A) (Sub E53446), Compression Spring; (Sub E53446)	8

See all parts with full part numbers in Heavy Parts AI →

Crop Chute And Deck Sheet [A10]

John Deere : 240 - Windrower, Platform : Crop Chute And Deck Sheet [A10]

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	4
03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	4
03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	4
03***09	Bolt; 5/16" X 1", Bolt; 5/16" X 1" (Disk), Bolt; 5/16" X 1" (Use With 14h819), Bolt; (243, 244, 343, 344, 443, 444, 543, 546, 643, 644, 645, 843, 844), Bolt; 5/16" X 1" (213-8 Used; 215 And 216-10 Used; 218-12 Used; 220, 222, And 224-14 Used), Bolt; 5/16" X 1", Rd. Hd., Bolt; 5/16" X 1", (Grain, Corn And Bean), Bolt; (B) 5/16" X 1", Bolt; 5/16" X 1" (Use With N10213), Bolt, Bolt; X 5/16" X 1", Bolt; 5/16" X 1", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a, And 853a; 22 Used-854a And 1253a), Bolt; 7.925 X 25.400 mm (5/16" X 1"), Bolt; 5/16" X 1" (913-8 Used; 915-10 Used; 918-12 Used; 920, 922, And 924-14 Used; 925-16 Used, 930-20 Used), Bolt; 5/16" X 1", (Use With 12h303, 14h785), Bolt; 5/16" X 1" (913, 915, 918, 920-4 Used; 922, 924 And 925, 6 Used; 930-8 Used) (Thru Backsheet Angles), Bolt; 5/16"X1", Bolt; (W) 5/16" X 1", Bolt; 5/16" X 1" (Square Neck), Bolt; 5/16" X 1" (A), Bolt; (C) 5/16" X 1", Bolt; 7.925 X 25.400 mm (5/16" X 1") Reinforcement To Channel, Bolt; 5/16" X 1" (Sub For H75408), Bolt; (A) 5/16" X 1", Bolt; Rd. Hd., 5/16" X 1", Bolt; 5/16" X 1" (Use With 14h785)	6

See all parts with full part numbers in Heavy Parts AI →

Cutterbar Knife Guards (Bolt-On Sections) [B10]

John Deere : 240 - Windrower, Platform : Cutterbar Knife Guards (Bolt-On Sections) [B10]

03***42	Bolt; X 7/16" X 2", Bolt; 7/16" X 2", Bolt; X 7/16" X 2" (Sub For 03h1575), Bolt; 7/16" X 2" Use Only With E62000 Section Guard	16
10***45	Bolt; 7/16" X 1-1/4" (Hs, Sae 8) 1217 (6 Used), 1219 (8 Used) Use Only With E62000 Section Guard, Bolt; 7/16" X 1-1/4" (Hs, Sae 8) Plow Bolt, Bolt; 7/16" X 1-1/4" (Hs, Sae 8), Bolt; 7/16" X 1-1/4", (Hs, Sae 8) (26 Used 12 Ft., 32 Used 15 Ft., 38 Used 18 Ft., 44 Used 21 Ft., 52 Used 25 Ft.), Bolt; 7/16" X 1-1/4", (3.7 M (12-Ft.) Platform, 26 Used) (4.3 M (14-Ft.) Platform, 30 Used), Bolt; 7/16" X 1-1/4" (Hs, Sae 8) 1217 (7 Used), 1219 (9 Used), Bolt; (A) 7/16" X 1-1/4" (Hs, Sae 8) 1217 (6 Used), 1219 (8 Used), Bolt; 7/16" X 1-1/4", Bolt; 7/16" X 1-1/4" (Sub For 09h1617), Bolt; 7/16"X1-1/4"	8
19***38	Bolt; (A) (B) M10 X 20, Bolt; (F) M10 X 20, Bolt; M10 X 20 Sub For J051020, Bolt; M10 X 20 (Sub For Er020249 Appl), Bolt; M10 X 20 (Lh And Rh), Bolt; M10 X 20 (C) (D), Bolt; (Sub For J011016, This Application) (Sub For J011020), Bolt, Bolt; M10 X 20, (Sub For 19m7160), Bolt; M10 X 20 (Hs=10.9) (Threads Into Engine Block), Bolt; (A: W/Hitch) M10 X 20 Hs=10.9, Cap Screw; M10 X 20, (Sub For Ffsb107408), Bolt; M10 X 20 (Sub For Er131053 Appl), Bolt; M10 X 20 Hs, 10.9, M10 X 20, Bolt; M10 X 20 (With Cab), Bolt; M10 X 20 (Also Order 24m7346 And 24m7055 With Lower Muffler Mount) (Also Order 24m7346 With Exhaust Clamp), Bolt; M10 X 20 (Sub For J901020), Bolt; M10 X 20 M10x20 (10.9), Cap Screw; (Not Illustrated) (Ground Strap), Bolt; (Sub For J011020), Bolt; M10 X 20 Lh And Rh, Bolt; M10 X 20 (Sub For J011020), Bolt; M10 X 20, (Use With H168126), Bolt; M10 X 20 (A), (Use With H168126), Cap Screw; (Sub For Ffsb107124), Bolt; M10 X 20 (10.9), Bolt; M10 X 20 (Hs=10.9), Cap Screw; (Sub For J011020), Bolt; (A) M10 X 20, (Use With H168126), Bolt; M10 X 20 10m X 20, Bolt; M10 X 20 (With Rops), Bolt; M10 X 20, Bolt; (A: W/Hitch) M10 X 20, Cap Screw; M10 X 20, (Sub For Ffsb107124) (Sub For Ffsb107124), Cap Screw; M10 X 20, (Flange Head), Bolt; M10 X 20 (A)(B), Bolt; M10 X 20, (Use With H168125), Cap Screw; M10 X 20, (Sub For Ffsb107124), Bolt; M10 X 20 (Use With H168125), Bolt; M10 X 20 10.9), Bolt; M10 X 20 (Hs=10.9) (Use With R113688 Or R113689), Bolt; (Sub For J011022, This Application) (Sub For J011020), Bolt; M10 X 20 (Lucas), Bolt; M10 X 20 Sub For J011020, Bolt; M10 X 20 (Sub For J011020 Or 46*91 ) (Sub For J271016, Or 19m7166this Application), Cap Screw; M10 X 20, (Sub For Ffsb105283), Bolt; M10 X 20 (Sub For J901020) (Use With 8126), Bolt; M10 X 20 M10x20, Bolt; M10 X 20 (Sub For 19m8324, This Application ) (Sub For T134887), Bolt; M10 X 20, (Hs, Head Marked 10.9), Bolt; M10 X 20 (Hs 10.9), Bolt; M10 X 20 (To Reservoir Bracket), Bolt; M10 X 20 (A) (B), Bolt; M10 X 20 Sub For J901020, Bolt; (A: Used In 5725hc Tractor Too) M10 X 20, Bolt; M10 X 20, (Sub For Ch12027), Bolt; (A: For Hillmaster Only) M10 X 20, Cap Screw; M10 X 20, (Sub For J901020), Bolt; M10 X 20 Hs=10.9, Bolt; M10x20, Cap Screw; M10 X 20, Bolt; M10 X 20 (A) (Use With H168126), Bolt; M10 X 20 Hs 10.9, Cap Screw; M10 X 20, (Sub For J011020), Bolt; M10 X 20 (Sub For J051020), Bolt; M10 X 20 (A), Bolt; M10 X 20 Sub For J271020, Bolt; M10 X 20 (Sub For J271020), Bolt; M10 X 20 (Sub For J271020 ) (Also Order 24m7346), Bolt; M10x20 (10.9), Bolt; (A) M10 X 20 (Use With H168126), Bolt; M10 X 20 (Hs, Head Marked 10.9), Bolt; (A: (6068hn053)) M10 X 20, Cap Screw; (Sub For J901020), Bolt; M10 X 20 (Sub For Ra1014079), Bolt; M10 X 20 10.9, Bolt; M10 X 20 12 Used, 14' (4.3 M), 14 Used, 16' (4.9 M), 16 Used, 18' (5.5 M), Bolt; (A: For 9650 ( -7000) & 9750 ( -7000)) M10 X 20, Bolt; (A: 7220 (0151- )) M10 X 20, Cap Screw; (Sub For J921020), Bolt; (E: ( -Xxxxxx) 9100-0176; 9200-0126; 9300-0150; 9400-0128) M10 X 20 Hs=10.9, Cap Screw, Bolt; M10 X 20, (Sub For 19m7166), Bolt; M10 X 20 (Sub For 46*91) (Also Order 12m7066)	1
AE***72	Hold-Down Clip; W/Bolt, Hold-Down Clip; Includes 19m7938, Hold-Down Clip; (Includes 19m7938), Hold-Down Clip; (Includes 19m7938) Reg., Hold-Down Clip, Hold-Down Clip; (Includes 19m8324)	1

See all parts with full part numbers in Heavy Parts AI →

Cutterbar Knife Guards [B11]

John Deere : 240 - Windrower, Platform : Cutterbar Knife Guards [B11]

03***82	Bolt; 7/16" X 1-3/4", (Hs, Sae 8), Bolt; 7/16" X 1-3/4" Full Thread, Bolt; 7/16" X 1-3/4", Full Thread (Hs, Sae 8), Bolt; 7/16" X 1-3/4" (Hs, Sae 8), Bolt; 7/16" X 1-3/4" (Hs, Sae 8) Full Thread, Bolt; 7/16" X 1-3/4", Bolt; 7/16" X 1-3/4", (Hs, Sae 8) Full Thread, Bolt; (A) 7/16" X 1-3/4" (Hs, Sae 8), Bolt; 7/16" X 1-3/4" (Hs, Sae 8) Full Thread, (24 Used, 3.7 M (12-Ft.) (28 Used, 4.3 M (14-Ft.), Bolt; 7/16" X 1-3/4", (Heavy Duty Guard), Bolt; 7/16" X 1-3/4", Heavy Duty Guard, Bolt; 7/16" X 1-3/4", Hs, Sae 8	0
03***95	Bolt; 7/16" X 1-1/2", Heavy Duty Guard, Bolt; 7/16" X 1-1/2", Bolt; 7/16" X 1-1/2", Full Thread (Hs, Sae 8), Bolt; 7/16" X 1-1/2" Full Thread, Bolt; 7/16" X 1-1/2" (Hs, Sae 8) Full Thread, Bolt; 7/16" X 1-1/2" (Hs, Sae 8) Full Thread, R.H. And L.H. End Guards, Bolt; 7/16" X 1-1/2", (Hs, Sae 8), Bolt; 7/16" X 1-1/2", (Hs, Sae 8) Full Thread, Bolt; 7/16" X 1-1/2", Hs, Sae 8, Full Thread, Bolt; (C) 7/16" X 1-1/2" (Hs, Sae 8) Full Thread, Bolt; 7/16" X 1-1/2" (Hs, Sae 8), Bolt; 7/16" X 1-1/2" Full Thread (Hs, Sae 8), Bolt; 7/16" X 1-1/2", Hs, Sae 8, Bolt; 7/16" X 1-1/2", Full Thread, Bolt; 7/16" X 1-1/2" (Hs, Sae 8) Full Thread, (25 Used, 3.7 M (12-Ft.) (29 Used, 4.3 M (14-Ft.), Bolt; 7/16" X 1-1/2", (Inner Guard), Bolt; 7/16" X 1-1/2", Inner Guard, Bolt; 7/16" X 1-1/2", (Heavy Duty Guard), Bolt; (C) 7/16" X 1-1/2"	0
19***38	Bolt; (A) (B) M10 X 20, Bolt; (F) M10 X 20, Bolt; M10 X 20 Sub For J051020, Bolt; M10 X 20 (Sub For Er020249 Appl), Bolt; M10 X 20 (Lh And Rh), Bolt; M10 X 20 (C) (D), Bolt; (Sub For J011016, This Application) (Sub For J011020), Bolt, Bolt; M10 X 20, (Sub For 19m7160), Bolt; M10 X 20 (Hs=10.9) (Threads Into Engine Block), Bolt; (A: W/Hitch) M10 X 20 Hs=10.9, Cap Screw; M10 X 20, (Sub For Ffsb107408), Bolt; M10 X 20 (Sub For Er131053 Appl), Bolt; M10 X 20 Hs, 10.9, M10 X 20, Bolt; M10 X 20 (With Cab), Bolt; M10 X 20 (Also Order 24m7346 And 24m7055 With Lower Muffler Mount) (Also Order 24m7346 With Exhaust Clamp), Bolt; M10 X 20 (Sub For J901020), Bolt; M10 X 20 M10x20 (10.9), Cap Screw; (Not Illustrated) (Ground Strap), Bolt; (Sub For J011020), Bolt; M10 X 20 Lh And Rh, Bolt; M10 X 20 (Sub For J011020), Bolt; M10 X 20, (Use With H168126), Bolt; M10 X 20 (A), (Use With H168126), Cap Screw; (Sub For Ffsb107124), Bolt; M10 X 20 (10.9), Bolt; M10 X 20 (Hs=10.9), Cap Screw; (Sub For J011020), Bolt; (A) M10 X 20, (Use With H168126), Bolt; M10 X 20 10m X 20, Bolt; M10 X 20 (With Rops), Bolt; M10 X 20, Bolt; (A: W/Hitch) M10 X 20, Cap Screw; M10 X 20, (Sub For Ffsb107124) (Sub For Ffsb107124), Cap Screw; M10 X 20, (Flange Head), Bolt; M10 X 20 (A)(B), Bolt; M10 X 20, (Use With H168125), Cap Screw; M10 X 20, (Sub For Ffsb107124), Bolt; M10 X 20 (Use With H168125), Bolt; M10 X 20 10.9), Bolt; M10 X 20 (Hs=10.9) (Use With R113688 Or R113689), Bolt; (Sub For J011022, This Application) (Sub For J011020), Bolt; M10 X 20 (Lucas), Bolt; M10 X 20 Sub For J011020, Bolt; M10 X 20 (Sub For J011020 Or 46*91 ) (Sub For J271016, Or 19m7166this Application), Cap Screw; M10 X 20, (Sub For Ffsb105283), Bolt; M10 X 20 (Sub For J901020) (Use With 8126), Bolt; M10 X 20 M10x20, Bolt; M10 X 20 (Sub For 19m8324, This Application ) (Sub For T134887), Bolt; M10 X 20, (Hs, Head Marked 10.9), Bolt; M10 X 20 (Hs 10.9), Bolt; M10 X 20 (To Reservoir Bracket), Bolt; M10 X 20 (A) (B), Bolt; M10 X 20 Sub For J901020, Bolt; (A: Used In 5725hc Tractor Too) M10 X 20, Bolt; M10 X 20, (Sub For Ch12027), Bolt; (A: For Hillmaster Only) M10 X 20, Cap Screw; M10 X 20, (Sub For J901020), Bolt; M10 X 20 Hs=10.9, Bolt; M10x20, Cap Screw; M10 X 20, Bolt; M10 X 20 (A) (Use With H168126), Bolt; M10 X 20 Hs 10.9, Cap Screw; M10 X 20, (Sub For J011020), Bolt; M10 X 20 (Sub For J051020), Bolt; M10 X 20 (A), Bolt; M10 X 20 Sub For J271020, Bolt; M10 X 20 (Sub For J271020), Bolt; M10 X 20 (Sub For J271020 ) (Also Order 24m7346), Bolt; M10x20 (10.9), Bolt; (A) M10 X 20 (Use With H168126), Bolt; M10 X 20 (Hs, Head Marked 10.9), Bolt; (A: (6068hn053)) M10 X 20, Cap Screw; (Sub For J901020), Bolt; M10 X 20 (Sub For Ra1014079), Bolt; M10 X 20 10.9, Bolt; M10 X 20 12 Used, 14' (4.3 M), 14 Used, 16' (4.9 M), 16 Used, 18' (5.5 M), Bolt; (A: For 9650 ( -7000) & 9750 ( -7000)) M10 X 20, Bolt; (A: 7220 (0151- )) M10 X 20, Cap Screw; (Sub For J921020), Bolt; (E: ( -Xxxxxx) 9100-0176; 9200-0126; 9300-0150; 9400-0128) M10 X 20 Hs=10.9, Cap Screw, Bolt; M10 X 20, (Sub For 19m7166), Bolt; M10 X 20 (Sub For 46*91) (Also Order 12m7066)	1
24***00	Washer; 15/32" X 1" X 0.134", (Sub For Ty4062), Washer; 15/32" X 1" X 0.134", This Application Only, Washer; 15/32" X 1" X 0.134", Washer; 15/32" X 1" X 0.134", L.H., Washer; 15/32" X 1" X 0.134", (3.7 M (12-Ft.), 16 Used) (4.3 M (14-Ft.), 17 Used), Washer; (B: 24 And 224 Balers) 15/32" X 1" X 0.134", Washer; (A) 15/32" X 1" X .134"	2

See all parts with full part numbers in Heavy Parts AI →

Decal Kit [B24]

John Deere : 240 - Windrower, Platform : Decal Kit [B24]

AE***32	Decal Kit; Consisting Of One "Important - Knife Drive Case Torque And Oil Level" Instruction, Two Model Designation, Two Red Reflector Tape, Two Amber Reflector Tape And Two Leaping Deer. (Platform Decal Kit) (Sub For Ae35834), Decal Kit, Decal Kit; (Sub For Ae35834)	1
E8***14	Label; (3 Used On Integral; 4 Used On Pull-Type) (Sub For E74026) (Sub P57547, This Application), Label; (D: Driveshaft), Label; Danger-"Entanglement In Rotating Driveline.", Label; Danger - Entanglement (Sub For E74026), Label; Danger - Entanglement, (Sub For E74026), Label; (See Codes 11 And 14 Pages 39 And 37), Label; (Driveline Entanglement), Label; (A) (B), Label; (B), Label; "Danger" (Driveshaft) (Sub For E74026), Label; Drive Line Entang., Label; (Lift-Type, Pull-Type And Semi-Mount), Label; (Sub For E74026) Drive-Line Entanglement, Label; (A) (B) (Sub For E74026) "Danger" (Drive Shaft) (Sidehill Only), Label; (B: English) (A), Label, Label; (Sub For E74026) (Sub (3) P57547, This Application), Label; (1 Used On Integral) (2 Used On Center Pull-Type) (3 Used On Offset Pull-Type) (Sub For E74026) (Sub P57547, This Application), Label; (Sub For E74026) (Danger: Driveline Entanglement), Label; (B: For North America (English) Only), Label; Rotating Driveline Shields, (Sub For E74026), Label; Danger - Driveline Entanglement (See Decal Kit) (Sub For E74026), Label; Danger Driveline Entanglement, (Sub For E74026), Label; (A: English), Label; Danger - Rotating Parts, Label; (Sub For M117095), Label; (Drive Line Entanglement) (Sidehill Only), Label; (Offset), Label; "Danger" Drive Line Entanglement - On Back Shaft Drive Line Bearing Shield (494 - 1 Used On Rh Shield; 693, 694, 893, 894 And 1293 - 2 Used), Label; (Outside Of Each Wing U-Joint Shield; Top Of Splitter Gear Case Shield; Outside Of Each Driveline Shield) (Sub (3) P57547, This Application), Label; Driveline Entangl., Label; (Outside Driveline Shield) (Not Used On Truck Mixer), Label; (On Hitch Of Pull-Type) (On Gear Case Support Of Integral) (Sub For E74026), Label; 18', 418.5mm (Sub For E74026), Label; (A) (Sub For E74026), Label; ("Danger") (Sidehill/Contour Master), Label; Danger,"Entanglement In Rotating Driveline", Plate Rh, Label; (Sub For E74026), Label; Danger-Drive Line Entanglement, Label; Danger - Drive Line Entanglement, Label; (Driveline Entanglement) (Sub For E74026), Label; (Drive Line Entang.), Label; Danger-"Entanglement In Rotating Driveline..", Label; (On Hitch Of Pull-Type; On Gear Case Support Of Integral) (Sub For E74026), Label; Danger - "Entanglement In Rotating Driveline...", Label; Lubrication, Label; Drive Line Entang, Label; Danger - Rotating Parts, (Sub For E74026), Label; Danger-Drive Line Entanglement (Roll), Label; (Outside Of Each Wing U-Joint Shield; Top Of Splitter Gear Case Shield), Label; English, Label; (A: For 540 Rpm) (B: For 1000 Rpm), Label; (L.H. Frame Near Front) (Sub For E74026), Label; "Danger" (Drive Shaft) (Sub For E74026), Label; (Sub P57547, This Application) (Shown), Label; (A), Label; "Caution" Drive Line Entanglement - On Back Shaft Drive Line Bearing Shield, Label; "Danger" (Drive Line Entanglement) (Sidehill Only), Label; Danger - Driveline Entanglement, (Sub For E74026), Label; Danger-Driveline Entanglement, (Sub For E74026), Label; (B), (C), Label; "Danger" (Sub For E74026), Label; Danger (Drive Line Entanglement), Label; Drive Line Entanglement, Label; "Danger", Label; Drive Line Entanglement, (Sub For E74026), Label; (A: Category 3) (B: Category 4), Label; Danger (Rotating Driveline), Label; (B) Drive Line Entang., Label; Danger - Entanglement, Label; (A: For North America (English) Only), Label; Danger - Drive Line Entanglement, (Sub For E74026), Label; Driveline Entanglement, (Sub For M117095), Label; Danger - Driveline Entanglement, Label; (Sub P57547, This Application), Label; (Sub For E74026) (Danger: Power Take-Off Entanglement), Label; Danger (Rotating Driveline) (Sub For M117095), Label; (Sub For E74026) Driveline Entanglement, Label; (Sub For E74026) (Sub P57547, This Application), Label; Danger, (Sub For E74026), Label; Danger-"Entanglement In Rotating Driveline", Label; Driveline Entanglement, (Sub For E74026), Label; (A: For 540 Rpm (Ball Joint)) (B: For 1000 Rpm (Ball Joint)), Label; (Sub For E74026) Danger - Entanglement, Label; Driveline Entanglement, Label; (Sub For E74026) Danger, Label; Danger (Driveline Entanglement), Label; (Drive Line Entanglement), Label; (Sub For E74026) Drive Line Entanglement	1
E8***41	Label; Oil Level And Torque, Label; Lubrication And Torque, (Sub For E65046), Label; Knife Drive Instructions, (Sub For E78942), Label; (Sub For E65046), Label; Lubrication, (Sub For E65046 And E78942), Label; Lubrication, (Sub For E65046), Label; For 4.3 M (14-Ft.) And 4.9 M (16-Ft.) Frames, (Sub For E78942), Label; Instruction, (Sub For E65046 Or E78942), Label; (Sub For E78942) Knife Drive Instructions	1
JD***21	Label; (G: Yellow) (H: Front Outer), Label; (A) Yellow, Label; (Sub For Jd5906)Yellow Reflector, Label; (D: Yellow) (A), Label; Amarelo/Amarillo/Yellow, Label; 50mm X 230mm Yellow, Label; Amber, Label; (E: Color: Yellow) Lgth = 230 X 50 mm, Label; (D) R.H. And L.H., Label; (B: Red), Label; Yellow (Front Outer), Label; (A) (C), Label; (Amber) (Sub For Jd5905, This Application) (Cut To Fit), Label; (A) Amber, Label; Yellow, (Sub For Jd5925 And Jd5583), Label; (F: Yellow), Label; Yellow (On Front Of Mounting Plate), Label; (A: Extension), Label; (H: Extension) Rh And Lh, Label; (B: Amber) 2" X 6.3", Label; (E: Yellow) (H: Front Outer), Label; (A: Color: Yellow), Label; Yellow (50 X 230), Label; Amber Reflector, Label; (D: Yellow), Label; (H: Yellow), Label; (D: Yellow) (G: Front Outer), Label; Yellow Reflector, Label; (F: Yellow) (I: Front Outer), Label; (Amber) (Front Of Top Beam 2-Inch From L.H. End And Top Front Of L.H. And R.H. Plate) (Kit Ah100289), Label; Yellow (Left Hand Front Only), Label; (H: Yellow (Front Outer)), Label; (B: Xxxxxx- 446(13*64) 546(1320)) Yellow, Label; (A) (B) Yellow (50 X 230), Label; Orange, Label; (Sub For Jd5906)Amber, Label; (C: (Xxxxxx- ) 14'(1301- ) 16'(1301- ) 18'(1301- )) (B) Yellow, Label; Yellow (Use Under Decal On Side Of Unit On All Folding Planters Where Visible From Sides When Transporting; Use On Side Brackets On First And Last Row Units Of Front-Folding Planters) (Visible From Front When Tronsporting), Label; (A: Amber Light And Bracket Assembly) Amber, Label; (50 X 230) Yellow (On Front Of Marker Plate), Label; 50 X 230 mm Amber, Label; (50 X 230) Yellow, Label; (D: Amber) 50 X 230 mm, Label; (C), Label; (B: Yellow) 50mm X 230mm, Label; Yellow, Label; (A: 9550 (6901- ) 9550sh (6901- )), Label; (F: Amber Reflector), Label; (Sub For A50290)Amber, Label; (A: For 9650 ( -6900) & 9750 ( -6900)) Yellow, Label; (A), Label; 50" X 230", Reflective, Yellow, Label; Yellow, (Use Under Decal On Side Of Unit On All Folding Planters Where Visible From Sides When Transporting; Use On Side Brackets On First And Last Row Units Of Front-Folding Planters) (Visible From Front When Tronsporting), Label; (E: Yellow (Front Outer)), Label; Yellow (On Front Mounting Plate), Label; (Amber) (Front Of Top Beam 2-Inch From L.H. End, And Top Front Of L.H. And R.H. Plate) (Kit Ah100289) (Sub Jd5905), Label; (A: Yellow), Label; (Yellow) (Cut To Fit), Label; Label Reflective (Yellow) On Front Of Plate Opposite Red Label, Label; (A: For (6901- ) & 9750 (6901- )), Label; (B: Amber) (Sub For A50290), Label; 50 X 230 Amber, Label; Amber - On Left-Hand Front Tube On Main Frame And On Front Of Marker Lights, Label; (Amber) (Sub For Jd5905, This Application) L.H. Only (Cut To Fit), Label; (A) Reflective Tape (Amber), Label; (D) Rh And Lh, Label; (A: Extension) Yellow, Label; "Yellow" Located On Brackets, Label; 50 X 230 Yellow, Label; (A: Amber Warning Light And Bracket Assembly) Amber, Label; (I: Yellow), Label; (A: For North America (French) Only) (B: For North America (English) Only) (C: Yellow), Label; Reflective, Yellow, 50" X 230", Label; (E: Yellow), Label; Yellow, (With Transport Option: 930d-11 Used; 936d-14 Used), Label; (Red), Label; (C: Yellow) (H: Front Outer), Label; Label Reflective (Yellow) (On Front Of Plate Opposite Red Label), Label; (B: Yellow), Label; (D: Extension) Rh And Lh, Label; (E: Amber Reflector), Label; (A: 9550 ( -6900) 9550sh ( -69**00)) Yellow, Label; (Sub For Jd5906) Amber Reflector, Label; "Amber" Reflective Tape; Located On Front L.H. Side Of Drill And On Marker Frame, Label; Yellow, Located On Front Of Arm, Label; (B), Label; (F: Amber), Label; (Sub For A50290) Amber, Label; (B) Yellow, Label; (J: Amber), Label, Label; (B: Yellow) (50 X 230), Label; (50 X 230 Yellow, Label; (B: Amber), Label; (Yellow), Label; Yelllow, Label; (I: Yellow) (G: Front Outer), Label; (H), Label; 50x230 Yellow, Label; (C: Yellow), Label; Yellow,50mm X 230mm, Label; Red, Label; (A) Label, Yellow	1

See all parts with full part numbers in Heavy Parts AI →

Gauge Shoe (3.7 M (12 Ft.) And 4.3 M (14 Ft.)) [A11]

John Deere : 240 - Windrower, Platform : Gauge Shoe (3.7 M (12 Ft.) And 4.3 M (14 Ft.)) [A11]

03***31	Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/2", Wide Front, Bolt; 1/2" X 1-1/2", Rd. Hd., Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/2", (Use With Ae37450), Bolt; 1/2" X 1-1/2", (3.7 M (12-Ft.), 7 Used) (4.3 M (14-Ft.), 9 Used), Bolt; 1/2" X 1-1/2" Wide Front, Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" L.H., Bolt; 35/64" X 27/32" X 3/8", Bolt; 1/2"X1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Rigid), Bolt; 1/2" X 1-1/4", Bolt; 1/2" X 1-1/2" Lh, Bolt; 1/2" X 1-1/2" (213-5 Used; 215 And 216-6 Used; 218-7 Used; 220, 222, 224-8 Used)	4
24***54	Washer; 17/32" X 1-1/8" X 0.105", (Kit An193805), Washer; 11/16"X1-1/4", Washer; 17/32" X 1-1/4" X .105", Washer; 17/32" X 1-1/8" X 0.105" (A), Washer; 17/32" X 1/8" X 0,105", Washer; 17/32" X 1-1/8" X 0.105", (Sidehill), Washer; (B) 17/32" X 1/8" X .105", Washer; (A) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X .105", Washer; .105" X 17/32" X 1-1/4", Washer; 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With 19h1820), Washer; 17/32"X1-1/18"X.105", Washer; 17/32"X1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105" (30"), Washer; (A) 17/32" X1/8" X .105", Washer; (A) (D) (E) (F) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105" 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With An190565 And An190941), Washer, Washer; 13.487 X 28.575 X 2.667 mm (17/32" X 1-1/8" X 0.105"), Washer; 17/32" X 1-1/8" X.105", Washer; 11/16x1-1/4", Washer; 17/32x1 1/8", Washer; (A) (B) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Level Land), Washer; X, Washer; (A) (E) (F) (G) 17/32" X 1-1/8" X 0.105", Washer; (A) 17/32" X 1/8" X .105", Washer; 17/32" X 1-1/8" X 0.105", (4 Used), (6 Used, Wide Gauge Shoes), Washer; (A: ( -Xxxxxx) Serial No. 8450-00*18; 8650-00*97) 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8", Washer; 17/32" X 1-1/8" X .105" (Sidehill), Washer; 17/32" X 1-1/8" X .105" (Level Land), Washer; 17/32" X 1-1/8"X.105", Washer; (B), Washer; 17/32" X 1-1/8" X 0.105", (3.7 M (12-Ft.) Platform, Less Conditioner), Washer; 13,5 X 28,57 X 2,5 mm, Washer; 17/32" X 1-1/8" X 0.105", (Kit An193804), Washer; 17/32" X 1-1/8" X .105" (Sub For 12h301), Washer; (B) 17/32"X1/8"X.105"	4
AE***94	Shoe; 4.9m (16-Ft) (Sub For Ae34582 Or Ae37799) (Sub Ae46573), Shoe; 3.7 M (12-Ft.) And 4.3 M (14-Ft.) (Sub Ae46573), Shoe; 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms, (Sub Ae46573), Shoe; (Sub Ae46573), Shoe; (Sub For Ae37799)	2
AE***73	Shoe	2

See all parts with full part numbers in Heavy Parts AI →

Gauge Shoe (3.7 M (12 Ft.), 4.3 M (14 Ft.) And 4.9 M (16 Ft.)) [A13]

John Deere : 240 - Windrower, Platform : Gauge Shoe (3.7 M (12 Ft.), 4.3 M (14 Ft.) And 4.9 M (16 Ft.)) [A13]

03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	4
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	4
24***54	Washer; 17/32" X 1-1/8" X 0.105", (Kit An193805), Washer; 11/16"X1-1/4", Washer; 17/32" X 1-1/4" X .105", Washer; 17/32" X 1-1/8" X 0.105" (A), Washer; 17/32" X 1/8" X 0,105", Washer; 17/32" X 1-1/8" X 0.105", (Sidehill), Washer; (B) 17/32" X 1/8" X .105", Washer; (A) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X .105", Washer; .105" X 17/32" X 1-1/4", Washer; 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With 19h1820), Washer; 17/32"X1-1/18"X.105", Washer; 17/32"X1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105" (30"), Washer; (A) 17/32" X1/8" X .105", Washer; (A) (D) (E) (F) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105" 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With An190565 And An190941), Washer, Washer; 13.487 X 28.575 X 2.667 mm (17/32" X 1-1/8" X 0.105"), Washer; 17/32" X 1-1/8" X.105", Washer; 11/16x1-1/4", Washer; 17/32x1 1/8", Washer; (A) (B) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Level Land), Washer; X, Washer; (A) (E) (F) (G) 17/32" X 1-1/8" X 0.105", Washer; (A) 17/32" X 1/8" X .105", Washer; 17/32" X 1-1/8" X 0.105", (4 Used), (6 Used, Wide Gauge Shoes), Washer; (A: ( -Xxxxxx) Serial No. 8450-00*18; 8650-00*97) 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8", Washer; 17/32" X 1-1/8" X .105" (Sidehill), Washer; 17/32" X 1-1/8" X .105" (Level Land), Washer; 17/32" X 1-1/8"X.105", Washer; (B), Washer; 17/32" X 1-1/8" X 0.105", (3.7 M (12-Ft.) Platform, Less Conditioner), Washer; 13,5 X 28,57 X 2,5 mm, Washer; 17/32" X 1-1/8" X 0.105", (Kit An193804), Washer; 17/32" X 1-1/8" X .105" (Sub For 12h301), Washer; (B) 17/32"X1/8"X.105"	4
AE***94	Shoe; 4.9m (16-Ft) (Sub For Ae34582 Or Ae37799) (Sub Ae46573), Shoe; 3.7 M (12-Ft.) And 4.3 M (14-Ft.) (Sub Ae46573), Shoe; 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms, (Sub Ae46573), Shoe; (Sub Ae46573), Shoe; (Sub For Ae37799)	2

See all parts with full part numbers in Heavy Parts AI →

Gauge Wheel (4.3 M (14-Ft.) Platform) [A15]

John Deere : 240 - Windrower, Platform : Gauge Wheel (4.3 M (14-Ft.) Platform) [A15]

12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	4
19***03	Cap Screw; 1/2" X 1", Unf, Cap Screw; 1/2" X 1"	4
22***70	Set Screw; 0.190" X 3/8"	4
AE***98	Wheel; (8 Ply Rating Tire), Wheel; Incl Key 7, Wheel; (For 16.0 X 6.5, 8 Ply Rating Tire), Wheel; For 16.0 X 6.50-8, 4 Ply Rating Tire, Wheel; (For 16 X 6.50, 8 Ply Rating Tire)	2

See all parts with full part numbers in Heavy Parts AI →

Gauge Wheel Frame (4.3 M (14-Ft.) Platform) [A14]

John Deere : 240 - Windrower, Platform : Gauge Wheel Frame (4.3 M (14-Ft.) Platform) [A14]

03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	4
19***15	Cap Screw; 1/2" X 1-1/4", North America, Cap Screw; 1/2" X 1-1/4" (Use With Ty15819, Ty16043, Ty15270 Or Ty16044), Cap Screw; 12.700 X 31.750 mm (1/2" X 1-1/4"), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (For Ty15270, Ty15819, Ty16043 And Ty16044), Cap Screw; 1/2" X 1-1/4" (Use With Re63295), Cap Screw; 1/2" X 1-1/4" (Use With 12h301), Cap Screw; 1/2" X 1-1/4" Nlr, Cap Screw; 1/2" X 1-1/4", (50 Per Package) (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4", (24 Used For 714, 714a; 28 Used For 716, 716a), Cap Screw; 1/2" X 1-1/4" Fenders, Cap Screw; 1/2" X 1-1/4", (Use With M46075), Cap Screw; 1/2 X 1-1/4", Cap Screw; (B) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (17 Used For Front Chain Shields, 26 Used For Rubber Shields, 10 Used For Steel Or Rear Chain Shields), Cap Screw; 5/8" X 2-1/2", Cap Screw; 1/2" X 1-1/4" (For Channel Tongue), Cap Screw; 1/2" X 1-1/4", (18 Used On Front Chain Shields, 26 Used On Rubber Shields, 10 Used On Rear Steel Or Chain Shields), Cap Screw; (A) (B) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Code 2306 And 2307, Cap Screw; 1/2" X 1-1/4" (Rh Side), Cap Screw; (A: Oversize Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", For 760 And 790, Cap Screw; 1/2x1-1/4", Cap Screw; 1/2" X 1-1/4" (Flexible), Cap Screw; 1/2" X 1-1/4" (Rh), Cap Screw; 1/2" X 1-1/4", (Sub For 19h1792), Cap Screw; (E) 1/2" X 1-1/4", Cap Screw; (B: Manual Hitch) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (50 Per Package) (Not Included With Piston Pump) (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4", (Sub For Ffsb109249), Cap Screw; (A) 1/2"X1-1/4", Cap Screw; (C) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" Lh, Cap Screw; 1/2" X 1-1/4", (Use With N202131), Cap Screw; 12.700 X 31.750 mm, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/4", (See Front Idler Support Plates), Cap Screw; (A: Os Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Lh, Cap Screw; 1/2" X 1-1/4" (Use With E54809), Cap Screw; 1/2" X 1-1/4", (For Channel Tongue), Cap Screw; (F) 1/2" X 1-1/4", Cap Screw; (A: (-Xxxxxx) Serial No. 8450-00*18; 8650-00*97) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (W/ Ae33160), Cap Screw; 1/2" X 1-1/4" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/4", (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (540rpm), Cap Screw; 1/2" X 1-1/4", 50 Per Package, (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4" (Flex), Cap Screw, Cap Screw; 1/2" X 1-1/4" 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 1/4", Cap Screw; (D) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 1-1/4", (6" Spacing), Cap Screw; (A) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Use With R110440), Cap Screw; 1/2" X 1-1/4", (For 14 Rotary Hoe), Cap Screw; 1/2" X 1-1/4", Fold Top, Cap Screw; 1/2" X 1-1/4", (Use With An210950), Cap Screw; 1/2"X2", Cap Screw; 1/2" X 1-1/4", (Use With Gd1072), Cap Screw; (E) 1/2" X 1-1/4", Front Gang, Cap Screw; (B: To Be Used With Oversize Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Code 2309 And 2310, Cap Screw; 1/2" X 1-1/4", (Use With Re63295), Cap Screw; 1/2" X 1-1/4", L.H., Cap Screw; (W) (F) 1/2" X 1-1/4", Cap Screw; 12.700 X 31.750 mm (1/2" X 1-1/4"), Cap Screw; 1/2" X 1-1/4", (Ru And Or), Cap Screw; 1/2" X 1-1/4", Rear Gang, Cap Screw; 1/2" X 1-1/4", (L.H. Only), Cap Screw; R.H., Cap Screw; 1/2" X 1-1/4" (Use With 14h1040 And 12h301), Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2"X1-1/4", Cap Screw; X 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Plateless Planting Unit, Cap Screw; 1/2" X 1-1/4", (Use With R110440), Cap Screw; X 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (Use With 12h304 And 14h1040), Cap Screw; 1/2" X 1-1/4" Hs, Sae 8	4
AE***86	Frame	2
E5***09	Lock Nut, Lock Nut; 1/2", Lock Nut; (213-5 Used; 215 And 216-6 Used; 218-7 Used; 220, 222, 224-8 Used), Lock Nut; (Sub For E62934), Lock Nut; (B), (Sub For E62934) (30"), Lock Nut; 12.700 mm (1/2"), Lock Nut; (Sub For A11455), Lock Nut; X X 1/2", Lock Nut; (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (A) (B), Lock Nut; (A) (B) (4 Used, 610 mm (24") Extension) (6 Used, 1 372 mm (54") Extension) (Sub For E62934), Lock Nut; Flange, Lock Nut; (A) 18' (5.5m), Lock Nut; (B) (Use With 1 372 mm (54") Extension) (Sub For E62934), Lock Nut; (A), Lock Nut; 12.700 mm Flange, Lock Nut; (Use With 1 372 mm (54") Extension) (B), Lock Nut; (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, And 224-16 Used; 230- 22 Used), Lock Nut; (24 Used, Short Tongue) (30 Used, Long Tongue) (Sub For E62934), Lock Nut; (30"), (Sub For E62934), Lock Nut; (3.7 M (12-Ft.), 7 Used) (4.3 M (14-Ft.), 9 Used) (Sub For E62934), Lock Nut; (24 Used, Short Tongue) (30 Used, Long Tongue), Lock Nut; (N), Lock Nut; (88", 110", And 132"), Lock Nut; (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, 224-16 Used), Lock Nut; (Sub For E54809 And E62934), Lock Nut; (Sub For K40014), Lock Nut; 12.700 mm (1/2") (With Delco Starting Motor), Lock Nut; (Sub E62934, This Application), Lock Nut; 12.700 mm, Lock Nut; 1/2", (With Nippondenso Starting Motor), Lock Nut; (A: Used With 995 Platforms And Honey Bee Drapers), Lock Nut; (Sub For E50302 And K40014), Lock Nut; 12.700 mm (1/2") W/ Delco Starting Motor, Lock Nut; R.H., Lock Nut; (Sub For E62934, This Application), Lock Nut; 12.700 mm (110" And 132")	8

See all parts with full part numbers in Heavy Parts AI →

Jack Stand [A16]

John Deere : 240 - Windrower, Platform : Jack Stand [A16]

AE***30	Stand	1
AE***95	Structural Tubing	1
K4***15	Lock Nut; (Sub For Bp14495) R.H., Lock Nut; 5/8 -11 Unc, Lock Nut; 5/8" (4 Used For Single Reach, 8 Used For Reach With W25912) (Sub For H35925 And W22657), Lock Nut; (B: For Wing Section) 15.875 mm, Lock Nut; 5/8", Surtir Con Ap39650, Lock Nut; 5/8", (Sub For Bp14495), Lock Nut; 5/8", Qty. Per Rotor, Lock Nut; 15.875 mm (5/8") (Sub For H35925), Lock Nut; 15.875 mm R.H., Lock Nut; 5/8", (20 Used L.H.) (20 Used R.H.), Lock Nut; (Sub For H35925), Lock Nut; (C) (D) 5/8", Lock Nut; (A) 5/8", Lock Nut; (8' And 10' Main Frame), Lock Nut; 5/8", (Sub For H35925 And W22657), Lock Nut; (Optional), Lock Nut; 5/8", (Sub For U44915 And Bp14495), Lock Nut; 5/8", (Sub For E37470 Or H35925), Lock Nut; 5/8", 120 Flail Shredder - Qty. Per Rotor, Lock Nut; 5/8", 115 Flail Shredder - Qty. Per Rotor, Lock Nut; (Sub For H35925) (Sub For E37470, This Application), Lock Nut; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer), Lock Nut; 8' And 10' Machines Only, Lock Nut; 5/8", For Center Cut Knives - Qty. Per Rotor, Lock Nut; 15.875 mm (5/8") 5/8", Lock Nut; X 5/8" (Sub For 14h760), Lock Nut; (B: 12.5 Foot) 15.875 mm (5/8"), Lock Nut; 28', Lock Nut; 5/8", (Use With N141174), Lock Nut; 5/8", (Sub For H35925), Lock Nut; 15.875 mm, Lock Nut; 15.875 mm (5/8") R.H. Thread, Lock Nut; (Sub For A15548), Lock Nut; 5/8", Furnish With Ap39650, Lock Nut; (B: For Wing Section), Lock Nut; 5/8", (Sustitucion Para (3) H35925), Lock Nut; (D) 5/8", Lock Nut; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) (D: Mainframe, (5 Section) Singlepoint), Lock Nut; 5/8", Lock Nut, Lock Nut; (Sub For E37470 Or H35925), Lock Nut; (C) 5/8", Lock Nut; (Sub For P49075 Or H35925), Lock Nut; (B) (C) 5/8", Lock Nut; 5/8", (4 Used For Single Reach, 8 Used For Reach With W25912), Lock Nut; 5/8", (16'0" Flex Fold), Lock Nut; (Sub For U44915, This Application) (A), Lock Nut; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) (D: Main Frame (5 Section) Single Point), Lock Nut; 5/8", (Sub For A15548), Lock Nut; (For Pulley Not Shown), Lock Nut; Rh, Lock Nut; 5/8", Replaces K40014 Nut, Lock Nut; 15.875 mm Pivot (Standard), Lock Nut; (B) 15.875 mm (5/8"), Lock Nut; 5/8", (Sub For Bp14495, W22657 And H35925), Lock Nut; 5/8" (Sub For H35925), Lock Nut; 15.875 mm (Sub For N280544, This Application), Lock Nut; (Sub For Bp14495), Lock Nut; (E) 5/8", Lock Nut; (E), Lock Nut; (A) (B) 5/8", Lock Nut; (Sub For N280544, This Application), Lock Nut; (A), Lock Nut; 5/8", (Cab Only), Lock Nut; (A: For Ballast Attachment), Lock Nut; 36', Lock Nut; (Use With An280775), Lock Nut; (Use With N241190), Lock Nut; (B) 5/8", Lock Nut; 5/8", Front Stop, Lock Nut; (A: 27 Ft - 9 In) (B: 30 Ft - 9 In (Illustrated)), Lock Nut; 5/8", (Sub For 14h1039), Lock Nut; (F) 5/8", Lock Nut; R.H. Thread, Lock Nut; 15.875 mm (5/8"), Lock Nut; (C), Lock Nut; 5/8" (Sub For E37470), Lock Nut; (For Pulley-Not Shown), Lock Nut; (8' And 10' Main Frames), Lock Nut; 5/8", 118 Flail Shredder - Qty. Per Rotor, Lock Nut; (R) 5/8", (Order An280995), Lock Nut; 5/8", (Sub For H35925) (Sub For E37470, This Application), Lock Nut; For Ballast Attachment, Lock Nut; 8' And 10' ( Machines Only), Lock Nut; (B), Lock Nut; (A: Qtys Listed For Both Sides)	1
K4***14	Lock Nut; 12.700 mm, Lock Nut; 12.700 mm (1/2") (Sub For E50302), Lock Nut; (A) 1/2", Lock Nut; (A) (D) (E) (F) 1/2", Lock Nut; (Sub For M63368), Lock Nut; (Sub For H79449), Lock Nut; 1/2", (Sub For E50302, This Application), Lock Nut; Front Half, Lock Nut; 1/2", (Sub For E50302), Lock Nut; (A) (E) (F) (G) 1/2", Lock Nut; 1/2", (Use With An210207 On 8850 Tractor), Lock Nut; 1/2", 115 Flail Shredder - Qty. Per Rotor, Lock Nut; 1/2" (7 Used For 5.5 M (18')), Lock Nut; 1/2", (Sub For 14h1040), Lock Nut; (2 Used, 350 Mower) (3 Used, 450 Mower), Lock Nut; 1/2" 1/2", (Sub For E50302), Lock Nut; (Sub For T27645), Lock Nut; (Used With Solid Tire), Lock Nut; (D) 1/2", Lock Nut; (A) (B) 1/2", Lock Nut; 1/2", (Sub For M63368 Or E50302), Lock Nut; Shim, Lock Nut, Lock Nut; (C) (B) 1/2", Lock Nut; (A) (B) (C) 1/2", Lock Nut; (Sub For Mg9636698), Lock Nut; (C) 1/2", Use With Clip, Lock Nut; 1/2", (Qty. Per Rotor), Lock Nut; 1/2", (Sub For Mg88871), Lock Nut; 1/2" (Sub For E50302), Lock Nut; 1/2" Rh (Finishing Blade), Lock Nut; 12.700 mm (Use With Aa69797), Lock Nut; (K) 1/2", (Sub For E50302), Lock Nut; 1/2", Lock Nut; (C) 1/2", When Clips Are Used, Lock Nut; (B) (D), Lock Nut; 12.700 mm For 390 Mower, Lock Nut; Use With Key 3 Only, Lock Nut; 1/2", (For Wheel With Solid Tire), Lock Nut; 12.700 mm (1/2") 1/2", (Sub For E50302), Lock Nut; 1/2", For Center Cut Knives - Qty. Per Rotor, Lock Nut; 1/2", 118 Flail Shredder - Qty. Per Rotor, Lock Nut; (Sub For Bp12214, This Application), Lock Nut; (A), Lock Nut; (B) 1/2", Lock Nut; 1/2", (Use With N161501), Lock Nut; 12.700 mm (1/2"), Lock Nut; 12.700 mm (1/2") Double Disk Opener, Lock Nut; (C) 1/2", Lock Nut; 12.700 mm (1/2") 25' And 30' Machines, Lock Nut; 1/2", (Sub For E50302 Or M63368), Lock Nut; 1/2", 120 Flail Shredder - Qty. Per Rotor, Lock Nut; (Sub For M802906), Lock Nut; (B: Used With 1910 Tow-Between Cart With 70, 000 Lbs Chain), Lock Nut; 1/2", (Sub For A31867, This Application), Lock Nut; (Sub T27645), Lock Nut; 12.700 mm (1/2"), Lock Nut; L.H., Lock Nut; (Sub For F2855r), Lock Nut; (B) (D) 1/2", Lock Nut; 12.700 mm For 360 Mower, Lock Nut; 1/2", Qty. Per Rotor, Lock Nut; (B), Lock Nut; 12.700 mm (1/2") 1/2" X 4" Grade 8, Lock Nut; (B) (C) 1/2", Lock Nut; (C) (D) 1/2", Lock Nut; 12.700 mm For 370 Mower, Lock Nut; (B) 1/2", When Clips Are Used, Lock Nut; (A) (B) 1/2", Use With Clip, Lock Nut; (A) (Sub For E50302), Lock Nut; (E) 1/2", Lock Nut; (C), Lock Nut; 1/2", (1 Used Per Capscrew), Lock Nut; 1/2", (Sub For T27645), Lock Nut; 12.700 mm (1/2") Runner Opener, Lock Nut; (Sub For E50302)	1

See all parts with full part numbers in Heavy Parts AI →

Knife (Riveted-On Section; 12', 14', And 16' Cutterbars) [B08]

John Deere : 240 - Windrower, Platform : Knife (Riveted-On Section; 12', 14', And 16' Cutterbars) [B08]

AE***85	Knifehead; Incl Keys 3-5 (Sub For Ae34328, Ae47798), Knifehead; (Sub For Ae34328 Or Ae47798), Knifehead; With Bushing And Seal, (Sub For Ae47798 And Ae34328) (Includes E74391), Knifehead; (Includes E83014 And Ae48125), Knifehead; (Sub For Ae34328 And Ae47798), Knifehead; Includes Needle Bearing Bushing, (Sub For Ae48125), Knifehead; With Pin (L.H. With Seal And Bearing), Knifehead; (Sub For Ae48125), Knifehead; With Bushing And Seal, (Sub For Ae47798 And Ae34328), Knifehead, Knifehead; With Pin, Bushing And Seal, (Sub For Ae47798 And Ae34328), Knifehead; W/Pin	1
AE***51	Cutterbar; Underserrated (3.7 M (12-Ft.) (Sub For Ae35789) (Also Order E83014), Cutterbar; (U) 3.7 M (12 Ft.) Complete, (Sub For Ae35789) (Also Order E83014), Cutterbar, Cutterbar; 3.7m (12-Ft) Underserrated, (Sub For Ae35789) (Also Order E83014), Cutterbar; Complete, 3.7 M (12-Ft) Underserrated, (Sub For Ae35789), Cutterbar; Complete, Underserrated, (Sub For Ae35789)	1
AE***52	Cutterbar; Overserrated (12 Ft.) (Sub For Ae48653, Ae35794 Or Ae35791) (Also Order E83014), Cutterbar; (O) 3.7 M (12-Ft.) Complete, (Sub For Ae35791, Ae35794 Or Ae48653) (Also Order E83014), Cutterbar; 3.7m (12-Ft) Overserrated, (Sub For Ae35791, Ae35794 Or Ae48653) (Also Order E83014), Cutterbar; Complete, 3.7 M (12-Ft) Overserrated, (Sub For Ae35794 And Ae35791) (Also Order E83014), Cutterbar; Complete, Overserrated, (Sub For Ae35791, Ae35794 Or Ae48653) (Also Order E83014), Cutterbar; Overserrated (3.7 M (12-Ft.) (Sub For Ae35791, Ae35794 Or Ae48653) (Also Order E83014)	1
AE***54	Cutterbar; 4.3m (14-Ft) Overserrated, (Sub For Ae35809) (Also Order E83014), Cutterbar; (O) 4.3 M (14-Ft.) Complete, (Sub For Ae35809) (Also Order E83014), Cutterbar; Complete, 4.3 M (14-Ft) Overserrated, (Sub For Ae35809), Cutterbar; Overserrated (4.3m (14-Ft.) (Sub For Ae35809) (Also Order E83014)	1

See all parts with full part numbers in Heavy Parts AI →

Knife (Riveted-On Sections; 9' Cutterbars) [B09]

John Deere : 240 - Windrower, Platform : Knife (Riveted-On Sections; 9' Cutterbars) [B09]

AE***37	Needle Bearing; (Use With Ae48587), Needle Bearing; (B), Needle Bearing; Used W/Needle Bearing Bushing, Needle Bearing	1
AE***85	Knifehead; Incl Keys 3-5 (Sub For Ae34328, Ae47798), Knifehead; (Sub For Ae34328 Or Ae47798), Knifehead; With Bushing And Seal, (Sub For Ae47798 And Ae34328) (Includes E74391), Knifehead; (Includes E83014 And Ae48125), Knifehead; (Sub For Ae34328 And Ae47798), Knifehead; Includes Needle Bearing Bushing, (Sub For Ae48125), Knifehead; With Pin (L.H. With Seal And Bearing), Knifehead; (Sub For Ae48125), Knifehead; With Bushing And Seal, (Sub For Ae47798 And Ae34328), Knifehead, Knifehead; With Pin, Bushing And Seal, (Sub For Ae47798 And Ae34328), Knifehead; W/Pin	1
AE***62	Cutterbar; Underserrated, (Sub For Ae41703 Or Ae34771) (Also Order E83014), Cutterbar; Complete, Underserrated, Chromed, (Sub For Ae41703, Ae34771 Or Ae34770) (Also Order E83014), Cutterbar; Complete, Underserrated, Chromed, (Sub For Ae34771, Ae34770 And Ae41703), Cutterbar; (U)	1
AE***64	Cutterbar; Complete, Overserrated, Chromed, (Sub For Ae34769 And Ae41758), Cutterbar; Complete, Overserrated, Chromed, (Sub For Ae41758 Or Ae34769) (Also Order E32014), Cutterbar; Overserrated, (Sub For Ae41758) (Also Order E83014), Cutterbar; (O)	1

See all parts with full part numbers in Heavy Parts AI →

Knife Drive Arm [B07]

John Deere : 240 - Windrower, Platform : Knife Drive Arm [B07]

19***63	Cap Screw; 5/8" X 3", (Use With Ar53880 Knuckle), Cap Screw; (A) 5/8"X3", Cap Screw; (A) 5/8" X 3", Cap Screw; (B) 5/8" X 3", Cap Screw; 5/8" X 3", No. 1 And 2 Grab Rolls, Cap Screw; 5/8" X 3" (Use With Ar81954), Cap Screw; 5/8" X 3" 5/8" X 3", Cap Screw; 5/8" X 3" (Sub For 19h1756), Cap Screw; 5/8" X 3" (Sub For 19h1890), Cap Screw; 15.875 X 76.200 mm (5/8" X 3"), Cap Screw; 5/8" X 3", (21 Used Lift Assist), Cap Screw; 5/8" X 3", Use Without Mechanical Latch, Cap Screw; 5/8"X3", (Sub For 19h1847), Cap Screw; (B) 5/8"X3", Cap Screw; 5/8" X 3", (Level Land), Cap Screw; 5/8" X 3", (Use With N134733), Cap Screw; 5/8" X 3", Cap Screw; 5/8"X2-3/4", Cap Screw; (A) (B) 5/8" X 3", Cap Screw; 5/8"X3", A=26,5mm, Cap Screw; 5/8x3", Cap Screw; 5/8" X 3" 5/8", Cap Screw; 5/8" X 3" (Use With 14h1039), Cap Screw; 5/8"X3", Cap Screw; 5/8" X 3" (Use With 12h294 And 14h1039), Cap Screw; 5/8"X3, Cap Screw; 5/8" X 3", Use With Electric Marker Control, Cap Screw; (C: Part Of Ar109180 Adjustable Front Axle) 5/8" X 3", Cap Screw; 5/8"X3" (Sub For 19h1847)	1
AE***82	Arm; Assembly, Incl Keys 34,35, Arm; (Sub For Ae35677) (Sub E81021), Arm, Arm; (Includes Screw And Nut), Arm; Assembly, Incl Keys 38,39	1
K4***15	Lock Nut; (Sub For Bp14495) R.H., Lock Nut; 5/8 -11 Unc, Lock Nut; 5/8" (4 Used For Single Reach, 8 Used For Reach With W25912) (Sub For H35925 And W22657), Lock Nut; (B: For Wing Section) 15.875 mm, Lock Nut; 5/8", Surtir Con Ap39650, Lock Nut; 5/8", (Sub For Bp14495), Lock Nut; 5/8", Qty. Per Rotor, Lock Nut; 15.875 mm (5/8") (Sub For H35925), Lock Nut; 15.875 mm R.H., Lock Nut; 5/8", (20 Used L.H.) (20 Used R.H.), Lock Nut; (Sub For H35925), Lock Nut; (C) (D) 5/8", Lock Nut; (A) 5/8", Lock Nut; (8' And 10' Main Frame), Lock Nut; 5/8", (Sub For H35925 And W22657), Lock Nut; (Optional), Lock Nut; 5/8", (Sub For U44915 And Bp14495), Lock Nut; 5/8", (Sub For E37470 Or H35925), Lock Nut; 5/8", 120 Flail Shredder - Qty. Per Rotor, Lock Nut; 5/8", 115 Flail Shredder - Qty. Per Rotor, Lock Nut; (Sub For H35925) (Sub For E37470, This Application), Lock Nut; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer), Lock Nut; 8' And 10' Machines Only, Lock Nut; 5/8", For Center Cut Knives - Qty. Per Rotor, Lock Nut; 15.875 mm (5/8") 5/8", Lock Nut; X 5/8" (Sub For 14h760), Lock Nut; (B: 12.5 Foot) 15.875 mm (5/8"), Lock Nut; 28', Lock Nut; 5/8", (Use With N141174), Lock Nut; 5/8", (Sub For H35925), Lock Nut; 15.875 mm, Lock Nut; 15.875 mm (5/8") R.H. Thread, Lock Nut; (Sub For A15548), Lock Nut; 5/8", Furnish With Ap39650, Lock Nut; (B: For Wing Section), Lock Nut; 5/8", (Sustitucion Para (3) H35925), Lock Nut; (D) 5/8", Lock Nut; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) (D: Mainframe, (5 Section) Singlepoint), Lock Nut; 5/8", Lock Nut, Lock Nut; (Sub For E37470 Or H35925), Lock Nut; (C) 5/8", Lock Nut; (Sub For P49075 Or H35925), Lock Nut; (B) (C) 5/8", Lock Nut; 5/8", (4 Used For Single Reach, 8 Used For Reach With W25912), Lock Nut; 5/8", (16'0" Flex Fold), Lock Nut; (Sub For U44915, This Application) (A), Lock Nut; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) (D: Main Frame (5 Section) Single Point), Lock Nut; 5/8", (Sub For A15548), Lock Nut; (For Pulley Not Shown), Lock Nut; Rh, Lock Nut; 5/8", Replaces K40014 Nut, Lock Nut; 15.875 mm Pivot (Standard), Lock Nut; (B) 15.875 mm (5/8"), Lock Nut; 5/8", (Sub For Bp14495, W22657 And H35925), Lock Nut; 5/8" (Sub For H35925), Lock Nut; 15.875 mm (Sub For N280544, This Application), Lock Nut; (Sub For Bp14495), Lock Nut; (E) 5/8", Lock Nut; (E), Lock Nut; (A) (B) 5/8", Lock Nut; (Sub For N280544, This Application), Lock Nut; (A), Lock Nut; 5/8", (Cab Only), Lock Nut; (A: For Ballast Attachment), Lock Nut; 36', Lock Nut; (Use With An280775), Lock Nut; (Use With N241190), Lock Nut; (B) 5/8", Lock Nut; 5/8", Front Stop, Lock Nut; (A: 27 Ft - 9 In) (B: 30 Ft - 9 In (Illustrated)), Lock Nut; 5/8", (Sub For 14h1039), Lock Nut; (F) 5/8", Lock Nut; R.H. Thread, Lock Nut; 15.875 mm (5/8"), Lock Nut; (C), Lock Nut; 5/8" (Sub For E37470), Lock Nut; (For Pulley-Not Shown), Lock Nut; (8' And 10' Main Frames), Lock Nut; 5/8", 118 Flail Shredder - Qty. Per Rotor, Lock Nut; (R) 5/8", (Order An280995), Lock Nut; 5/8", (Sub For H35925) (Sub For E37470, This Application), Lock Nut; For Ballast Attachment, Lock Nut; 8' And 10' ( Machines Only), Lock Nut; (B), Lock Nut; (A: Qtys Listed For Both Sides)	1

See all parts with full part numbers in Heavy Parts AI →

Knife Drive Belt And Shields [B13]

John Deere : 240 - Windrower, Platform : Knife Drive Belt And Shields [B13]

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	8
03***73	Bolt; 5/8" X 2-3/4", (Short Neck), Bolt; 5/8" X 2-3/4", Bolt; 5/8" X 2-3/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Bolt; 5/8"X2-3/4", Bolt; 5/8" X 2-3/4" (Sub For 03h1268)	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	1

See all parts with full part numbers in Heavy Parts AI →

Knife Drive Case Mounting [B14]

John Deere : 240 - Windrower, Platform : Knife Drive Case Mounting [B14]

AE***09

Sill

See all parts with full part numbers in Heavy Parts AI →

Knife Drive Case [B05]

John Deere : 240 - Windrower, Platform : Knife Drive Case [B05]

11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	1
14***75	Nut; 7/8", Slotted, Nut; 7/8", Use On Yoke With 7/8" Shaft, Nut; 7/8", Nut, Nut; (B) Lh, Nut; Lh, 7/8", Nut; L.H., Nut; 7/8" (Ref. 7/8") Lh, Nut; (F: Incld In Cb01488227 & Cb01488228 Tie Rod Groups) 7/8", Nut; 7/8" 7/8", Nut; 7/8" L.H., Nut; Sp, 7/8", Nut; 7/8", Slotted, L.H., Nut; 7/8" (A) (B), Nut; 7/8", L.H., Nut; 7/8", Unf, Nut; 7/8" Slotted, Titn To 250 Ft-Lb., Nut; (A: 8520 (02***33- )) 7/8", Nut; 7/8", For 610, Nut; 7/8", Unf,, Nut; 7/8" Slotted, Nut; 7/8", For 810, Nut; (B) 7/8", Nut; 7/8", Castellated, Nut; (A) 7/8", Slotted, Nut; 7/8", Slotted, Unf	1
14***12	Nut; (C) 3/4", Nut; 3/4", Slotted, Nut; 3/4" 3/4" Slotted, Nut; (312), Nut; (D) (E) 3/4", Nut; 3/4", Slotted, Unc, Nut; 3/4" (Offset Pull-Type), Nut; 19.050 mm (3/4") Slotted, Nut, Nut; 3/4", Nut; 3/4", Use On Yoke With 3/4" Shaft, Nut; 3/4" Slotted, Nut; (A) 3/4", Nut; 3/4" 3/4" (Slotted), Nut; 19.050 mm (3/4")	1
15***11	Pipe Bushing; 1/8" (Sub For Mg87916), Pipe Bushing; 3/8", Pipe Bushing; Adapter, 3/8" X1/8", Pipe Bushing; (312), Pipe Bushing; Outside Hex., 3/8" X 1/8", (Use With Ae42758), Pipe Bushing; 1/8" X 3/8", Lgth= 16.256mm, Pipe Bushing; 1/8", Pipe Bushing; (A) 3/8" X 1/8", Pipe Bushing; Outside Hex., 3/8" X 1/8", Pipe Bushing; 90°, 1", Pipe Bushing; 1/8", Outside Hex. (Use With Ae42758), Pipe Bushing; Hex. Hd., 3/8" X 1/8", Pipe Bushing; 1/8", (A), Pipe Bushing; 1/8" 3/8" X 1/8" (A) (B), Pipe Bushing; (A), Pipe Bushing; 3/8" X 1/8", Hex. Hd., Pipe Bushing; 1/8", (Use With Ae42758), Pipe Bushing; 3/8" X 1/8" Outside Hexagon, Pipe Bushing; 1/8", Pipe Bushing; 1/8", (Front And Rear Axles), Pipe Bushing; 3/8" X 1/8", (For 4219dn-02 Engine), Pipe Bushing; 3/4" X 1/8", (Use With Ae42758), Pipe Bushing; 1/8" 3/8" X 1/8", Pipe Bushing; 3/8"X1/8", Pipe Bushing; 3/8" X 1/8", Pipe Bushing; 3.175 mm (1/8"), Pipe Bushing; (3/8 X 1-1/8 Pipe Thread), Pipe Bushing; Bushing, 1/8" X 3/8", Pipe Bushing	1

See all parts with full part numbers in Heavy Parts AI →

Knife Riveting Tool [B15]

John Deere : 240 - Windrower, Platform : Knife Riveting Tool [B15]

TY***07	Sleeve; 1/4" Punch, Sleeve, Sleeve; (6 mm (1/4")Punch), Sleeve; 6 mm (1/4") Punch, Sleeve; (6 mm (1/4") Punch)	1
TY***13	Sleeve, Sleeve; (6 mm (5/16")Punch), Sleeve; 8 mm (5/16") Punch, Sleeve; (8 mm (5/16") Punch), Sleeve; 5/16" Punch	1
TY***12	Punch; 5/16", Punch; 8 mm (5/16"), Punch	1
TY***08	Sleeve	1

See all parts with full part numbers in Heavy Parts AI →

Knockdown Bar [A17]

John Deere : 240 - Windrower, Platform : Knockdown Bar [A17]

03***51	Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1"	4
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	4
24***54	Washer; 17/32" X 1-1/8" X 0.105", (Kit An193805), Washer; 11/16"X1-1/4", Washer; 17/32" X 1-1/4" X .105", Washer; 17/32" X 1-1/8" X 0.105" (A), Washer; 17/32" X 1/8" X 0,105", Washer; 17/32" X 1-1/8" X 0.105", (Sidehill), Washer; (B) 17/32" X 1/8" X .105", Washer; (A) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X .105", Washer; .105" X 17/32" X 1-1/4", Washer; 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With 19h1820), Washer; 17/32"X1-1/18"X.105", Washer; 17/32"X1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105" (30"), Washer; (A) 17/32" X1/8" X .105", Washer; (A) (D) (E) (F) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105" 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With An190565 And An190941), Washer, Washer; 13.487 X 28.575 X 2.667 mm (17/32" X 1-1/8" X 0.105"), Washer; 17/32" X 1-1/8" X.105", Washer; 11/16x1-1/4", Washer; 17/32x1 1/8", Washer; (A) (B) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Level Land), Washer; X, Washer; (A) (E) (F) (G) 17/32" X 1-1/8" X 0.105", Washer; (A) 17/32" X 1/8" X .105", Washer; 17/32" X 1-1/8" X 0.105", (4 Used), (6 Used, Wide Gauge Shoes), Washer; (A: ( -Xxxxxx) Serial No. 8450-00*18; 8650-00*97) 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8", Washer; 17/32" X 1-1/8" X .105" (Sidehill), Washer; 17/32" X 1-1/8" X .105" (Level Land), Washer; 17/32" X 1-1/8"X.105", Washer; (B), Washer; 17/32" X 1-1/8" X 0.105", (3.7 M (12-Ft.) Platform, Less Conditioner), Washer; 13,5 X 28,57 X 2,5 mm, Washer; 17/32" X 1-1/8" X 0.105", (Kit An193804), Washer; 17/32" X 1-1/8" X .105" (Sub For 12h301), Washer; (B) 17/32"X1/8"X.105"	4
AE***87	Knockdown Bar; (4.8 M) (16-Ft.) (Sub For Ae31870) (Sub Ae57671), Knockdown Bar; (4.9 M (16-Ft.) Platform) (Sub For Ae31870), Knockdown Bar; 4.9 M (16-Ft.), Knockdown Bar; 4.9 M (16-Ft.) (Sub For Ae31870) (Sub Ae57671), Knockdown Bar; 5.0 M (16-Ft.) (Sub Ae57671), Knockdown Bar; 4.9 M (16-Ft.) (Sub Ae57671)	1

See all parts with full part numbers in Heavy Parts AI →

L.H. Cross Shaft [A22]

John Deere : 240 - Windrower, Platform : L.H. Cross Shaft [A22]

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	3
22***75	Set Screw; 5/16" X 1/4", (Sub For Mg80975), Set Screw; 5/16" X 1/4" Standard Capacity, Set Screw; 5/16" X 1/4", Set Screw, Set Screw; (A: Regular Duty) 5/16" X 1/4", Set Screw; (E) 5/16" X 1/4", Set Screw; Hex - Socket Head, Set Screw; 5/16 X 1/4", Set Screw; 5/16" X 1/4" 5/16" X 1/4", Set Screw; 5/16" X 1/4", (Top), Set Screw; 5/16"X1-1/4", Set Screw; (C) 5/16" X 1/4", Set Screw; 5/16" X 1-1/4", Set Screw; (G) 5/16" X 1/4"	1
22***79	Set Screw; (A: Only For 2, 0 M Hiflow Pickup) 3/8" X 3/8", Set Screw; 0.375" X 0.375", Set Screw; 3/8" X 3/8", Socket, Set Screw; 3/8" X 3/8", Set Screw, Set Screw; 9.525 X 9.525 mm, Set Screw; 3/8"X3/8", Set Screw; (B: For Round Shaft) 3/8" X 3/8" (For Dc41518), Set Screw; (A: Only For 1.8 M Pickup) 3/8" X 3/8"	1
24***99	Washer; .180" X 25/32" X 1-5/8", Washer; 25/32" X 1-5/8" X 0,180", Washer; 25/32" X 1-5/8" X 0.180" 13 Teeth, Washer, Washer; 25/32" X 1-5/8" X 0.180" (Use With Ae57505 Or Ae57506), Washer; 25/32" X 1-5/8" X .180", Washer; 25/32"X1-5/8"X0.180", Washer; 25/32"X1-5/8", Washer; 25/32" X 1-5/8" X .180, Washer; 25/32" X 1-5/8" X 0.180", (Not Required With Metric Shafts), Washer; 0.180"X25/32"X1-5/8", Washer; 25/32x1-5/8", Washer; 19.837 X 41.275 X 4.572 mm (25/32" X 1-5/8" X 0.180"), Washer; 25/32" X 1-5/8" X 0.180", (2-Joint Hookup), Washer; 0.180"X25/32"X1-5/8" (W/ Dc19550), Washer; 19.837 X 41.275 X 4.572 mm, Washer; (A) 25/32" X 1-5/8" X 0.180", Washer; 25/32" X 1-5/8" X 0.180", Washer; 25/32"X1-5/8"X.180", Washer; .180" X 25/32" X 1-5/8" (W/ Dc19550), Washer; 1.5/8" X 25/32" X .180", Washer; 25/32" X 1-5/8" X 0.180", (854a And 1253a), Washer; (C: 2-Joint Hookup) 25/32" X 1-5/8" X 0.180", Washer; 25/32"X1-5/8"X.0180", Washer; 25/32" X 1-5/8" X 0.180", (4 Nominal)	1

See all parts with full part numbers in Heavy Parts AI →

Lower Lift Arm Platform Attaching Pin (2280 Windrower) [B18]

John Deere : 240 - Windrower, Platform : Lower Lift Arm Platform Attaching Pin (2280 Windrower) [B18]

11***38	Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69*01- ) 9550sh (69*01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm	2
3***3	Pin; 1" X 7.811", (Sub For N130708), Pin; 1" X 7.811", (Sub For H31109), Pin; (Sub For N130708), Pin; (Sub For A47930 And H31109), Pin	2
AA***92	Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00*26; 7700-0020; 7800-01**50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650	2

See all parts with full part numbers in Heavy Parts AI →

Lower Lift Arm Platform Attaching Pin (2320 And 2420 Windrower) [B19]

John Deere : 240 - Windrower, Platform : Lower Lift Arm Platform Attaching Pin (2320 And 2420 Windrower) [B19]

11***38	Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69*01- ) 9550sh (69*01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm	2
3***3	Pin; 1" X 7.811", (Sub For N130708), Pin; 1" X 7.811", (Sub For H31109), Pin; (Sub For N130708), Pin; (Sub For A47930 And H31109), Pin	2
AA***92	Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00*26; 7700-0020; 7800-01**50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650	2

See all parts with full part numbers in Heavy Parts AI →

Main Gear Case [A18]

John Deere : 240 - Windrower, Platform : Main Gear Case [A18]

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
15***66	Pipe Plug; 3/8" (Floor Plate) (Optional), Pipe Plug; 3/8", (Use With Re31299) (Without Turbocharger), Pipe Plug; 3/8", (Sub For Ch15002), Pipe Plug, Pipe Plug; Sq. Hd., 3/8", Pipe Plug; 3/8", (Use With R89790), Pipe Plug; (A) 3/8", (One Not Used W/ Re20889), Pipe Plug; 3/8" 3/8''-18nptf, Threads With Pre-Applied Sealant, Filets Enduits De Produit D'Etancheite, Mit Dichtmittel, Con Materiale Di Tenuta, Con Sellador, Med Taetningsmedel, Pipe Plug; 3/8", (Sub For R47395), Pipe Plug, Pipe Plug; 3/8" Front, Pipe Plug; 3/8" 3/8"-18 Npt, Pipe Plug; 3/8", Hex Ctsk., 3/4", Pipe Plug; 3/8" (One Not Used With Re20889), Pipe Plug; 3/8" (Use With Ar54556), Pipe Plug; 3/8", (Use With At16133), Pipe Plug; 3/8" 3/8"-18npt (Ord 15h695) With Square Head, Pipe Plug; 3/8" (Dn-03), Pipe Plug; 3/8" (4640, 4840), Pipe Plug; 3/8", Pipe Plug; 3/8" 3/8"-18npt Or Ord 15h695 = With Square Head, Pipe Plug; 3/8" (Bottom Of Intake Manifold, Pipe Plug; 3/8", Pipe Plug; (Use With Re31299) 3/8" (Without Turbocharger), Pipe Plug; (Bottom Of Intake Manifold), Pipe Plug; 9.525 mm (3/8"), Pipe Plug; 3/8", (Sub For Mg508010 Or 15h563), Pipe Plug; 3/8", (Not Used Appl), Pipe Plug; (A) 3/8", (Use 1 With R43851 Or R63285), Pipe Plug; (D) 3/8", Pipe Plug; 3/8", (Use With At206990), Pipe Plug; 3/8", Sq. Hd., Pipe Plug; (A) 3/8", Pipe Plug; 3/8", (Use With R108970), Pipe Plug; 3/8", (Sub For 15h563), Pipe Plug; 3/8" 3/8"-18npt, Pipe Plug; 3/8" (Sub For P45809), Pipe Plug; 3/8" (Front), Pipe Plug; 3/8", (Sub For P45809), Pipe Plug; 3/8", (Use With Ar54556), Pipe Plug; 3/8" 3/8"-18npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Bottom Of Intake Manifold), Pipe Plug; 3/8", Without Turbocharger, Pipe Plug; 3/8", (Front), Pipe Plug; (Use With R108970), Pipe Plug; 3/8" (Not Used Appl), Pipe Plug; 3/8" 3/8"-18 Npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Use With R104592, R134429 And 15h690), Pipe Plug; 3/8", (Use With At210378), Pipe Plug; 3/8" (Use With R89790), Pipe Plug; 3/8", (Less Starting Aid), Pipe Plug; 3/8", (Front), Pipe Plug; 3/8", Hex. Ctsk., Pipe Plug; (A: Threads With Pre-Applied Sealant) 3/8" 3/8''-18 Nptf	2
19***13	Cap Screw; 5/16" X 5/8", (Use With 12h303 And 14h785), Cap Screw; 5/16" X 5/8" (220-5 Used; 222 And 224-10 Used), Cap Screw; 5/16" X5/8", Cap Screw; (C) (E) 5/16" X 5/8", Front, Cap Screw; 5/16" X 5/8" (Dn-03, Gn-01, Ln-01, Nb-D, Nb-G, Nb-L), Cap Screw; 1/2" X 2", Cap Screw; 5/16"X8", Cap Screw; (A) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Sub N10212, This Application), Cap Screw; (A: 4-Post Roll-Gard) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Use With N10213), Cap Screw; 5/16" X 5/8" (Use With An281247), Cap Screw; 5/16" X 5/8", (Ea-G, Ge-01), Cap Screw; 5/16"X5/8", Cap Screw; 5/16" X 5/8", (4 Used Sound-Gard Body), Cap Screw; 5/16" X 5/8" (A), Cap Screw; 5/16" X 5/8" (Nlr), Cap Screw; X 5/16" X 5/8", Cap Screw; 5/16"X5/8" (For Z10945, Z11386), Cap Screw; 5/16" X 5/8", Nla, Cap Screw; 5/16" X 5/8", (Use With R40930, R40940 Or R49550), Cap Screw; (B: W/O Cab) 5/16" X 5/8" Oos, Cap Screw; 5/16" X 5/8", (Sub For Mg88859), Cap Screw; 5/16" X 5/8", Cowl To Control Support, Cap Screw; 5/16" X 5/8", No Longer Required, Cap Screw; 5/16" X 5/8" (Sub For 19h1948), Cap Screw; 5/16" X 5/8" (Use With 12h303 And 14h785), Cap Screw; (C) (E) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", (Use (3) With R26078), Cap Screw; 7.925 X 15.875 mm (5/16" X 5/8"), Cap Screw; 5/16" X 5/8", (Lower) 6 Roller Pump, Cap Screw; 5/16" X 5/8", (Sub N10212, This Application), Cap Screw; 5/16" X 5/8", (Dn-01, Gn-01), Cap Screw; 7.925 X 15.875 mm, Cap Screw; (E: Use With Smooth Crown Wheel) 5/16" X 5/8", Cap Screw; (B) 5/16" X 5/8", Cap Screw; 5/16"X5/8" (For Z11386), Cap Screw; (C) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", (2903), Cap Screw; (F) 5/16" X 5/8", Lower, Cap Screw; 5/16 X 5/8", Cap Screw; 5/16" X 5/8" (Use With 14h785), Cap Screw; (V) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Sub For 19h2284), Cap Screw; 5/16"X9/16", Cap Screw; 5/16" X 5/8", (9108,9121), Cap Screw; 5/16" X 5/8", (3 Used Rs, Ut), Cap Screw; 5/16" X 5/8", Cap Screw; 5/16"X.518", Cap Screw; 5/16" X 5/8", For C1232n Only, Cap Screw; 5/16"X.578", Cap Screw; (D) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Rg), Cap Screw; 5/16"X3/8", Cap Screw; (A) R.Bosch,5/16"X5/8", Cap Screw; (B) 5/16"X5/8", Cap Screw, Cap Screw; 5/16" X 5/8" (No Longer Required), Cap Screw; 5/16" X 5/8", 6 Roller Pump Only, Cap Screw; 5/16" X 5/8" 5/16" X 5/8", Cap Screw; (A) 5/16"X5/8", Cap Screw; 5/16" X 5/8", (Use With R71529 Or R71531), Cap Screw; 5/16" X 5/8", Lower, 6 Roller Pump Only, Cap Screw; 5/16" X 5/8", (Nlr), Cap Screw; 5/16" X 5/8", (No Longer Required), Cap Screw; 5/16" X 5/8", (4 Used, Sound-Gard Body), Cap Screw; (B: 4-Post Roll-Gard) 5/16" X 5/8", Cap Screw; (A: Contained In Ar87569) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", Germany, Cap Screw; 5/16" X 5/8" (Sub N10212) This Application, Cap Screw; 5/16" X 5/8", (Ut), Cap Screw; 5/16" X 5/8" (D), Cap Screw; X 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (C)	4
19***95	Cap Screw; 1/2"X3/4" Rear, Cap Screw; (A) 1/2" X 3/4", Cap Screw; 1/2"X3/4", Cap Screw; 1/2" X 3/4", (Use With M45077), Cap Screw; 1/2" X 3/4", (Sub 19h1792), Cap Screw; 1/2" X 3/4", (Sub E57351), Cap Screw; 1/2" X 3/4", For Plugging Holes, Cap Screw; 1/2" X 3/4" (Sub For Mg9627879), Cap Screw; (A) 1/2"X3/4", Rear, Cap Screw; 1/2" X 3/4", Use With Code 1907 Engine Oil Dipstick, Cap Screw; 1/2" X 3/4", (Use With Ah125654 Or Ah125655), Cap Screw; 1/2"X3/4" (Front), Cap Screw; 1/2" X 3/4", Cap Screw; 1/2" X 3/4", (Rear), Cap Screw; 1/2"X3/4" (Sub For 19h1792), Cap Screw; (D) 1/2" X 3/4", Cap Screw; 1/2" X 3/4" (For Plugging Lowerhles), Cap Screw; 1/2"X3/4" (Sub For T30774), Cap Screw; 1/2"X3/4", (Sub For T30774), Cap Screw; 1/2" X 3/4", (Manual Steering), Cap Screw; 1/2" X 3/4", In-Line Units, Cap Screw; (A) 1/2"X3/4", Cap Screw; (B) 1/2" X 3/4", Cap Screw; 1/2" X 3/4" (Use With Ah125654 Or Ah125655), Cap Screw; 1/2"X3/4",Rear, Cap Screw, Cap Screw; 1/2"X3/4", Rear, Cap Screw; 1/2"X3/4" (Sub For F2275r), Cap Screw; 12.700 X 19.050 mm (1/2" X 3/4")	2

See all parts with full part numbers in Heavy Parts AI →

Multi-Bat Pickup Reel [A24]

John Deere : 240 - Windrower, Platform : Multi-Bat Pickup Reel [A24]

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	2
03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	2
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	0
03***72	Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 5/16" X 1/2", Bolt; (B) 5/16"X1/2", Bolt; 5/16" X 1/2", (3.7 M (12-Ft.), 9 Used Per Tooth Bar) (4.3 M (14-Ft.), 12 Used Per Tooth Bar) (4.8 M (16-Ft.), 12 Used Per Tooth Bar), Bolt; 5/16"X1/2", Bolt; 5/16" X 1/2", 9 Used, 3.7m (12 Ft); 12 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 5/16" X 1/2", Each Additional Tooth Bar, Bolt; 5/16" X 1/2", (Per Tooth Bar), Bolt; (Sub For Mg280616), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7 M (12-Ft.) (12 Used Per Tooth Bar, 4.3 M (14-Ft.), Bolt; 5/16" X 1/2" (215 And 216-1 Used; 218, 220, 222, And 224-2 Used; 230-4 Used), Bolt; 5/16" X 1/2" (Sub For 03h1607), Bolt; (C) 5/16" X 1/2", Bolt; (B) 5/16" X 1/2", Bolt; 5/16x1/2", Bolt, Bolt; (C) 5/16"X1/2", Bolt; 5/16" X 1/2" (915-1 Used; 918, 920, 922, 924 And 925- 2 Used; 930-4 Used), Bolt; 5/16" X 1/2", (9 Used Per Tooth Bar, 3.7m (12-Ft.) (12 Used Per Tooth Bar, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; (A) 5/16" X 1/2", Bolt; X 5/16" X 1/2", Bolt; 5/16" X 1/2" (A), Bolt; 5/16" X 1/2", 9 Used Per Tooth Bar, 3.7 M (12-Ft.) 12 Used Per Tooth Bar, 4.3 M (14-Ft.) And 5.0 M (16-Ft.)	0

See all parts with full part numbers in Heavy Parts AI →

Narrow Windrow Opening Deck Sheets And Shields (Multi-Bat Reel)(12-Ft.) Platform Less Conditioner [B16]

John Deere : 240 - Windrower, Platform : Narrow Windrow Opening Deck Sheets And Shields (Multi-Bat Reel)(12-Ft.) Platform Less Conditioner [B16]

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	14
03***64	Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)	2
24***54	Washer; 17/32" X 1-1/8" X 0.105", (Kit An193805), Washer; 11/16"X1-1/4", Washer; 17/32" X 1-1/4" X .105", Washer; 17/32" X 1-1/8" X 0.105" (A), Washer; 17/32" X 1/8" X 0,105", Washer; 17/32" X 1-1/8" X 0.105", (Sidehill), Washer; (B) 17/32" X 1/8" X .105", Washer; (A) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X .105", Washer; .105" X 17/32" X 1-1/4", Washer; 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With 19h1820), Washer; 17/32"X1-1/18"X.105", Washer; 17/32"X1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105" (30"), Washer; (A) 17/32" X1/8" X .105", Washer; (A) (D) (E) (F) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105" 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With An190565 And An190941), Washer, Washer; 13.487 X 28.575 X 2.667 mm (17/32" X 1-1/8" X 0.105"), Washer; 17/32" X 1-1/8" X.105", Washer; 11/16x1-1/4", Washer; 17/32x1 1/8", Washer; (A) (B) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Level Land), Washer; X, Washer; (A) (E) (F) (G) 17/32" X 1-1/8" X 0.105", Washer; (A) 17/32" X 1/8" X .105", Washer; 17/32" X 1-1/8" X 0.105", (4 Used), (6 Used, Wide Gauge Shoes), Washer; (A: ( -Xxxxxx) Serial No. 8450-00*18; 8650-00*97) 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8", Washer; 17/32" X 1-1/8" X .105" (Sidehill), Washer; 17/32" X 1-1/8" X .105" (Level Land), Washer; 17/32" X 1-1/8"X.105", Washer; (B), Washer; 17/32" X 1-1/8" X 0.105", (3.7 M (12-Ft.) Platform, Less Conditioner), Washer; 13,5 X 28,57 X 2,5 mm, Washer; 17/32" X 1-1/8" X 0.105", (Kit An193804), Washer; 17/32" X 1-1/8" X .105" (Sub For 12h301), Washer; (B) 17/32"X1/8"X.105"	2
AE***30	Shield; (Sub For Ae39093), Shield; With Decals, (3.7 M (12-Ft.) Platform, Less Conditioner), Shield; Includes Decal, Shield; With Decals, Shield; (Includes Decal)	1

See all parts with full part numbers in Heavy Parts AI →

Non-Clog Cutterbar Knife Guards [B12]

John Deere : 240 - Windrower, Platform : Non-Clog Cutterbar Knife Guards [B12]

03***95	Bolt; 7/16" X 1-1/2", Heavy Duty Guard, Bolt; 7/16" X 1-1/2", Bolt; 7/16" X 1-1/2", Full Thread (Hs, Sae 8), Bolt; 7/16" X 1-1/2" Full Thread, Bolt; 7/16" X 1-1/2" (Hs, Sae 8) Full Thread, Bolt; 7/16" X 1-1/2" (Hs, Sae 8) Full Thread, R.H. And L.H. End Guards, Bolt; 7/16" X 1-1/2", (Hs, Sae 8), Bolt; 7/16" X 1-1/2", (Hs, Sae 8) Full Thread, Bolt; 7/16" X 1-1/2", Hs, Sae 8, Full Thread, Bolt; (C) 7/16" X 1-1/2" (Hs, Sae 8) Full Thread, Bolt; 7/16" X 1-1/2" (Hs, Sae 8), Bolt; 7/16" X 1-1/2" Full Thread (Hs, Sae 8), Bolt; 7/16" X 1-1/2", Hs, Sae 8, Bolt; 7/16" X 1-1/2", Full Thread, Bolt; 7/16" X 1-1/2" (Hs, Sae 8) Full Thread, (25 Used, 3.7 M (12-Ft.) (29 Used, 4.3 M (14-Ft.), Bolt; 7/16" X 1-1/2", (Inner Guard), Bolt; 7/16" X 1-1/2", Inner Guard, Bolt; 7/16" X 1-1/2", (Heavy Duty Guard), Bolt; (C) 7/16" X 1-1/2"	0
03***06	Bolt; 7/16" X 2-3/4", Hs, Sae 8, Bolt; 7/16" X 2-3/4" (Hs, Sae 8), Bolt; 7/16" X 2-3/4", 1-1/2" Thread (Hs, Sae 8), Bolt; 7/16" X 2-3/4" (1-1/2" Thread Length), Bolt; 7/16" X 2-3/4", Bolt, Bolt; (C) 7/16" X 2-3/4", Bolt; 7/16" X 2-3/4" 1-1/2" Thread Lg., Bolt; 7/16" X 2-3/4", 1-1/2" Thread Length, Bolt; (C) 7/16" X 2-3/4" (Hs, Sae 8) 1-1/2" Thread Length, Bolt; 7/16" X 2-3/4" (Hs, Sae 8) 1-1/2" Thread Length, Bolt; 7/16" X 2-3/4", (Hs, Sae 8) 1-1/2" Thread Length, Bolt; 7/16" X 2-3/4", Hs, Sae 8, 1-1/2 Thread Length, Bolt; 7/16" X 2-3/4", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Bolt; 7/16" X 2"-3/4", Bolt; 7/16" X 2-3/4", Hs, Sae 8, 1-1/2" Thread Length	0
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	0
19***02	Bolt; (C: For 12-Row Narrow (22-Inch)) M10 X 25, Bolt; M10 X 25, Bolt; 10x25mm, Cap Screw; (Sub For Ffsb107365), Bolt; M10 X 25 (Sub For (1) J901025)(Not Illustrated), Bolt; M10 X 25, 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Bolt; (B: Dubuque (To) Esn -70*94) (C: Saran (Cd) Esn -Xxxxxx) M10 X 25, Bolt; M10 X 25 Sub For J901025, Bolt; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M10 X 25, Bolt; M10 X 25 M12 X 35, Bolt; (B: Dubuque (T0) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M10 X 25, Cap Screw; M10 X 25, (Sub For Ffsb107461), Cap Screw; M10 X 25, (Sub For J021020), Bolt; M10 X 25 (Sub For J011025), Cap Screw; M10 X 25, (Sub For Ffsb107365 And J021020), Bolt; M10 X 25 (Sub 19m7785, This Application), Bolt, Bolt; (A: Order By Tractor Serial Number Only) (B: ( -0046, 2148, 2149, 2151-2157, 2159-2166, 2168-2174, 2184-5466)) M10 X 25 Hs 10.9, Bolt; M10 X 25, (4019) (Sub For M800077), Bolt; (With Canopy), Cap Screw; (Sub For Ffsb107131) (Sub For J011025), Bolt; M10 X 25 Nlr, Bolt; M10 X 25 European W/Cab, Bolt; (B: For 6-Row Narrow, 6-Row 70 cm And 6-Row Wide) M10 X 25, Bolt; (Sub For J021025), Bolt; M10 X 25 Full Thread, Cap Screw; M10 X 25, (Sub For J021025), Bolt; (A: For 8-Row Wide Skip-Row) M10 X 25, Bolt; (A: Dubuque (T0) Esn 7490-) (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) M10 X 25, Cap Screw; M10 X 25, (Sub For Ffsb107210 Or J031025), Bolt; M10 X 25 Extendable Dipperstick, Cap Screw; M10 X 25, (Sub For Ffsb107219 Or J031025), Bolt; M10 X 25 M10x25 (10.9), Bolt; M10 X 25, (Sub For Cc51295), Bolt; (A: For 8-Row Narrow) M10 X 25, Cap Screw; M10 X 25, (Sub For J921025), Bolt; M10 X 25, (Use With H168125), Bolt; (C: For 12-Row Narrow And 12-Row, 70 cm) M10 X 25, Bolt; (C: Cast Gudgeon W/2.5" Pin) M10 X 25, Bolt; (B), Cap Screw; M10 X 25, (Sub For J901025), Cap Screw; M10 X 25, Cap Screw; M10 X 25, (Sub For Ffsb106880), Bolt; M10x25 (Sub For 19m7166), Bolt; (C: For 12-Row Narrow) M10 X 25, Bolt; (A: Dubuque (T0) Esn -7489) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M10 X 25, Bolt; M10 X 25 (Sub For (1) J901025)( J271025 Nla), Bolt; (A) (B) M10 X 25, Cap Screw; M10 X 25, (Sub For Ffsb107131), Bolt; M10 X 25 (Use With R260569), Bolt; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M10 X 25, Bolt; M10 X 25 Ground Strap, Cap Screw; (Sub For Ffsb107461), Bolt; M10 X 25 (Hs, Head Marked 10.9) (Sub For Mg382364), Cap Screw; M10 X 25, (Sub For Ffsb107365), Bolt; M10 X 25 (Sub For Cc51295), Bolt; (A: W/ Cab) M10 X 25, Bolt; (Sub For Cc51295), Bolt; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M10 X 25, Bolt; (C) M10 X 25, Bolt; M10 X 25 (Sub For J271025), Bolt; (A: Dubuque (To) Esn -7094) (B: Saran (Cd) Esn -Xxxxxx) M10 X 25, Bolt; (A: 5625hc And 5725hc) M10 X 25, Bolt; M10 X 25 Machines Built Before May 2003, Bolt; (D: Autoquad Transmission) M10 X 25, Bolt; M10 X 25 (Sub For 4633), Bolt; M10 X 25 (Sub For J051025), Cap Screw; M10 X 25, (Torque 37lb.Ft), Bolt; M10 X 25 (D), Bolt; M10 X 25 (Sub For J021025), Bolt; (B: For 8-Row Narrow And 8-Row Wide) M10 X 25, Bolt; M10 X 25 10x25 (10.9), Bolt; M10 X 25, (Sub For M800077), Bolt; M10 X 25 (Use With R208764), Bolt; M10 X 25 (Sub For J271025 ) (Also Order 24m7346), Cap Screw; (Sub For Ffsb107131 Or J011025), Bolt; M10 X 25 (Sub For 19m7938, This Application), Bolt; M10 X 25 (Use With Metric Rasp Bars), Cap Screw, Bolt; (A: For 6-Row Narrow And 6-Row Wide) M10 X 25, Bolt; M10 X 25 Sub For J021025, Bolt; M10 X 25 Rear, Bolt; M10 X 25, (Use With Metric Rasp Bars), Bolt; (A) M10 X 25, Bolt; M10 X 25 (Sub For J901025), Bolt; M10 X 25 (Use With Ah161400 Or Ah161405) (Metric Rasp Bars), Bolt; M10 X 25 (Sub For J222010), Bolt; (B: For 6-Row Narrow, 6-Row 70 cm, 6-Row Wide And 8-Row Wide Skip-Row) M10 X 25, Bolt; M10 X 25 Lh, Bolt; M10 X 25 (Use With Ah161389, Ah161390, Ah161395, Ah161398 Or Ah161411) (Use With Metric Rasp Bars), Bolt; M10 X 25 (Covers), Cap Screw; M10 X 25, (Torque To 73 Nm), Bolt; M10 X 25 Sub For J031025, Bolt; M10 X 25 (Sub For 19m7785, This Application), Bolt; M10 X 25 (Sub For J921025), Bolt; (A: Dubuque (T0) Esn -7094) (B: Saran (Cd) Esn -Xxxxxx) M10 X 25, Bolt; M10 X 25 (With Cab), Bolt; M10 X 25 Machines Built May 2003 And After, Bolt; (B: Oos Tractors) M10 X 25, Bolt; M10 X 25 (Hs, Head Marked 10.9), Bolt; M10 X 25 (Upper), Bolt; M10x25, Bolt; M10 X 25 (Sub For M800077), Bolt; M10 X 25, (Tf), Bolt; M10 X 25 (Hs=10.9), Bolt; M10 X 25, M10x20 (10.9), Bolt; M10 X 25, (Use With Ah161389, Ah161390, Ah161395, Ah161398 Or Ah161411) (Use With Metric Rasp Bars), Bolt; M10 X 25 (Sub For J901025) (Use With 4787), Cap Screw; M10 X 25, (Sub For J031025), Bolt; (B: Dubuque (T0) Esn -7094) (C: Saran (Cd) Esn -Xxxxxx) M10 X 25, Bolt; (C) M10x25, Bolt; M10 X 25 Nla Machines Built May 2003 And After, Bolt; (A: For 4-Row And 6-Row Wide Skip-Row) M10 X 25, Bolt; (A: Dubuque (T0) Esn -7094) (B: Saran (Cd) Esn -Xxxxxx) M10 X 25, Bolt; (A: Dubuque (T0) Esn -7094) (B: Saran (Cd) Esn -Xxxxxx) M10 X 25, Bolt; M10 X 25 Sub For J021020, Bolt; M10 X 25 (Right Upper Hinge To Cab), Bolt; M10 X 25 (Use With Ah161400, Ah161405, Ah161407, Ah161409 Or Ah161410), (Metric Rasp Bars), Bolt; M10 X 25 (Use With H168125), Bolt; M10 X 25 Hs=10.9, Bolt; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx)) M10 X 25, Bolt; M10 X 25, (Sub 19m7785, This Application), Bolt; M10x1.5x25, Bolt; M10 X 25 Hs 10.9, Cap Screw; M10 X 25, (Sub For J011025), Cap Screw; M10 X 25, (Sub For Ffsb108726 And 19m7167), Cap Screw; (Sub For J021025), Bolt; (Sub For J011025), Bolt; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M10 X 25, Cap Screw; M10 X 25, (Sub For J011030, This Application), Cap Screw; M10 X 25, (Clamp To Lower Radiator Support To Radiator, Bolt; M10 X 25 (Sub For J031025), Bolt; M10 X 25, (3015df106) (Sub For M800077), Bolt; (B) M10 X 25, Bolt; (C: For 8-Row Narrow, 8-Row 70 cm And 8-Row Wide) M10 X 25, Bolt; M10 X 25, (Compatible W/Yz91145), Bolt; M10 X 25 Sub For J051025, Bolt; (B: With Cab) M10 X 25, Bolt; M10 X 25 (10.9), Bolt; M10 X 25 (Nlr), Bolt; M10 X 25 (Use With R260568), Bolt; M10 X 25, (With Cab), Bolt; M10 X 25 (Use With 12h304), (Use With Metric Rasp Bars), Bolt; M10 X 25, (Use With Ah161400, Ah161405, Ah161407, Ah161409 Or Ah161410) (Metric Rasp Bars), Bolt; M10 X 25 (Sub For J021020), Bolt; Ar, M10 X 25, Cap Screw; M10 X 25, (Clamp To Lower Radiator Support To Radiator), Cap Screw; M10 X 25, (With Engine Oil Fill Tube) (Not Illustrated), Bolt; M10 X 25, (Sub For M800077) M10x25, Bolt; M10 X 25 Sub For J011025, Bolt; M10 X 25 (Sub For At255972), Bolt; M10 X 25 (Hs 10.9), Bolt; (A: (Xxxxxx- ) 8100-9025; 8200-9042; 8300-9042; 8400-9007) M10 X 25, Bolt; (B: Dubuque (To) Esn -7094) (C: Saran (Cd) Esn -Xxxxxx) M10 X 25, Bolt; (A: With Cab) M10 X 25, Bolt; (A: For 9650 ( -7000) & 9750 ( -7000)) M10 X 25, Bolt; (B: For 8-Row Wide) M10 X 25, Bolt; (A: For 4-Row) M10 X 25, Bolt; M10 X 25 (Hs=10.9) (Sub For M800077), Bolt; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) M10 X 25, Bolt; M10 X 25 Sub For J271025, Cap Screw; (Sub For J011025), Bolt; M10 X 25 (Sub For J901025) (Use With 81*38), Bolt; (C: For 8-Row Narrow) M10 X 25, Bolt; M10 X 25 (Sub For T135586)	0

See all parts with full part numbers in Heavy Parts AI →

Platform Frame [A06]

John Deere : 240 - Windrower, Platform : Platform Frame [A06]

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	6
03***95	Bolt; 3/8"X1-1/2", Bolt; 3/8"X1-1/2" (Sub For 03h1468), Bolt; 3/8" X 1-1/2" (Use With H127801), Bolt; 3/8" X 1-1/2", (22 Used On 18', 26 Used On 21' And 25' And 30 Used On 30'), Bolt; 3/8" X 1-1/2", (16 Used On 15' And 18', 20 Used On 21' And 25', 24 Used On 30'), Bolt; 3/8" X 1-1/2" (L.H. End - 4 Used; R.H. End - 2 Used, 1st And 4th Holes), Bolt; 3/8" X 1-1/2" (Rh), Bolt; 9.525 X 38.100 mm (3/8" X 1-1/2"), Bolt; 3/8" X 1-1/2", (40-Foot Boom), Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2" (Rigid), Bolt; 3/8" X 1-1/2" (Bolted Sections), Bolt; 3/8" X 1-1/2", (6 Used For 660, 8 Used For 680), Bolt; 3/8" X 1-1/2" Repair Kit, Bolt; 3/8"X1-1/2" (Sub For 03h1468 Appl), Bolt; 3/8" X 1-1/2" Lh, Bolt; 3/8" X 1-1/2", (Variable Drive)	1
03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	4
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	3

See all parts with full part numbers in Heavy Parts AI →

Platform Telescoping Hookup [B23]

John Deere : 240 - Windrower, Platform : Platform Telescoping Hookup [B23]

19***99	Cap Screw, Cap Screw; 7/16" X 2-1/4", Cap Screw; 7/16" X 2-1/4", Hs, Sae 8, Cap Screw; 7/16" X 2-1/4", Hs Sae 8, Cap Screw; 7/16" X 2-1/4", Hs, Sae 8,	1
AC***00	Yoke With Shaft; (540 Rpm) Length = 19.4", Yoke With Shaft	1
AE***16	Cross And Bearing As; (Sub For Am39093), Cross And Bearing As; Kit, Center Parts, Cross And Bearing As; (Sub For Am2871e), Cross And Bearing As, Cross And Bearing As; (Sub For Aw12495 And Am2871e), Cross And Bearing As; (A) (Sub For Am39093), Cross And Bearing As; Connection With Bearings	2
AE***51	Powershaft Shield; (A) (Sub Ae74417) (Also Order Ae74327) Steel	1

See all parts with full part numbers in Heavy Parts AI →

R.H. Cross Shaft [A20]

John Deere : 240 - Windrower, Platform : R.H. Cross Shaft [A20]

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	3
14***93	Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)	1
24***99	Washer; .180" X 25/32" X 1-5/8", Washer; 25/32" X 1-5/8" X 0,180", Washer; 25/32" X 1-5/8" X 0.180" 13 Teeth, Washer, Washer; 25/32" X 1-5/8" X 0.180" (Use With Ae57505 Or Ae57506), Washer; 25/32" X 1-5/8" X .180", Washer; 25/32"X1-5/8"X0.180", Washer; 25/32"X1-5/8", Washer; 25/32" X 1-5/8" X .180, Washer; 25/32" X 1-5/8" X 0.180", (Not Required With Metric Shafts), Washer; 0.180"X25/32"X1-5/8", Washer; 25/32x1-5/8", Washer; 19.837 X 41.275 X 4.572 mm (25/32" X 1-5/8" X 0.180"), Washer; 25/32" X 1-5/8" X 0.180", (2-Joint Hookup), Washer; 0.180"X25/32"X1-5/8" (W/ Dc19550), Washer; 19.837 X 41.275 X 4.572 mm, Washer; (A) 25/32" X 1-5/8" X 0.180", Washer; 25/32" X 1-5/8" X 0.180", Washer; 25/32"X1-5/8"X.180", Washer; .180" X 25/32" X 1-5/8" (W/ Dc19550), Washer; 1.5/8" X 25/32" X .180", Washer; 25/32" X 1-5/8" X 0.180", (854a And 1253a), Washer; (C: 2-Joint Hookup) 25/32" X 1-5/8" X 0.180", Washer; 25/32"X1-5/8"X.0180", Washer; 25/32" X 1-5/8" X 0.180", (4 Nominal)	1
24***77	Washer; 1-5/32" X 1-3/4" X 0.060", (8 Used, 327) (12 Used, 337), Washer; 1-9/32" X 2" X .060" Ar, Washer; (A: Cab) 1-5/32" X 1-3/4" X 0.060", Washer; X 1-5/32" X 1-3/4" X .060", Washer; 1-5/32" X 1-3/4" X 0.060", (Use With An193602), Washer; 5/32"X1-3/4", Washer; 1-5/32" X 1-3/4" X 0,060", Washer; 1-5/32" X 1-3/4" X 0.060", (8 Used, Less Iron-Gard) (12 Nominal With Iron-Gard), Washer; 5/32x1-3/4", Washer; 1-5/32" X 1-3/4" X 0.060" (Use With A62715), Washer; (A) 1-5/32" X 1-3/4" X 0,06", Washer; 1-3/4" X 1-5/32" X .060", Washer; X 1-5/32" X 1-3/4" X .60" (Sub For 24h1496), Washer, Washer; 1-5/32" X 1-3/4" X 0.060", (12 Nominal), Washer; 1-5/32" X 1-3/4" X 0.060" (C), Washer; 1-5/32" X 1-3/4" X 0.060" (Use With Dc35225) (A), Washer; 1-5/32" X 1-3/4" X .060", Ar, Washer; 1-5/32" X 1-3/4" X 0.060" (24 Nominal), Washer; 29.362 X 44.450 X 1.524 mm, Washer; 29,4 X 44,5 X 1,5 mm, Washer; (A) 1-5/32" X 1-3/4" X .060", Washer; (A) 1-3/4" X 1-5/32" X .060", Washer; 1-5/32" X 1-3/4" X 0.060", (1 Nominal), Washer; 1-5/32" X 1-3/4" X 0.060", (10 Nominal), Washer; 1-5/32" X 1-3/4" X .060", Washer; 1.5/32"X1-3/4"X.060", Washer; 1-5/32" X 1-3/4" X 0.060" (Use With Afh204032), Washer; (A) 1-3/4"X1-5/32"X.060", Washer; 1-5/32"X1-3/4"X.060", Washer; 1-5/32" X 1-3/4" X 0.060" Lh, Rh, Washer; 1-5/32" X 1-3/4" X 0.060" (Use With Dc35225), Washer; 1-9/32" X 2" X .060", Washer; 1.5/32" X 1-3/4" X .060", Washer; 1-5/32" X 1-3/4" X 0.060", Washer; .060"X1-5/32"X1-3/4" (Sub For E56592), Washer; 1-3/4"X1-5/32"X.060", Washer; 1-5/32" X 1-3/4" X 0,06", Washer; (B) .060" X 1-5/32" X 1-3/4", Washer; 15/32" X 1-3/4" X .060", Washer; 1-5/32" X 1-3/4" X 0.060", (8 Nominal), Washer; 1-5/32" X 1-3/4" X 0.060" (A), Washer; (A) 1-5/32" X 1-3/4" X 0.060"	0

See all parts with full part numbers in Heavy Parts AI →

Reel Idler And Belt [A23]

John Deere : 240 - Windrower, Platform : Reel Idler And Belt [A23]

03***51	Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1"	2
08***54	Cap Screw; 1/2" X 7-1/2"	1
11***54	Cotter Pin; 6,3 X 32 mm, Cotter Pin; 6.300 X 32 mm, Cotter Pin; 6,3x32mm, Cotter Pin, Cotter Pin; 6.300 X 32 mm, (Sub 11m7073)	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1

See all parts with full part numbers in Heavy Parts AI →

Strippers, Cutterbars And Shields [A08]

John Deere : 240 - Windrower, Platform : Strippers, Cutterbars And Shields [A08]

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	0
10***45	Bolt; 7/16" X 1-1/4" (Hs, Sae 8) 1217 (6 Used), 1219 (8 Used) Use Only With E62000 Section Guard, Bolt; 7/16" X 1-1/4" (Hs, Sae 8) Plow Bolt, Bolt; 7/16" X 1-1/4" (Hs, Sae 8), Bolt; 7/16" X 1-1/4", (Hs, Sae 8) (26 Used 12 Ft., 32 Used 15 Ft., 38 Used 18 Ft., 44 Used 21 Ft., 52 Used 25 Ft.), Bolt; 7/16" X 1-1/4", (3.7 M (12-Ft.) Platform, 26 Used) (4.3 M (14-Ft.) Platform, 30 Used), Bolt; 7/16" X 1-1/4" (Hs, Sae 8) 1217 (7 Used), 1219 (9 Used), Bolt; (A) 7/16" X 1-1/4" (Hs, Sae 8) 1217 (6 Used), 1219 (8 Used), Bolt; 7/16" X 1-1/4", Bolt; 7/16" X 1-1/4" (Sub For 09h1617), Bolt; 7/16"X1-1/4"	0
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	0
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	8

See all parts with full part numbers in Heavy Parts AI →

Tall Crop Dividers [B17]

John Deere : 240 - Windrower, Platform : Tall Crop Dividers [B17]

03***12	Bolt; (B) 3/8" X 2-1/2", Bolt, Bolt; 3/8" X 2-1/2", Bolt; (A) 3/8" X 2-1/2", Bolt; 3/8" X 2-1/2" Lh, Bolt; 3/8" X 2-1/2", Rd.Hd., Bolt; 3/8" X 2-1/2" (Use With 14h812)	12
03***09	Bolt; 3/8"X3-1/4", Bolt; 3/8" X 3-1/4", Rd. Hd., Bolt; 3/8" X 3-1/4", Bolt, Bolt; 9.525 X 82.550 mm (3/8" X 3-1/4")	4
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	18
19***01	Cap Screw; 3/8" X 2", (Use With 12h304), Cap Screw; 3/8" X 2", (Slow Speed), Cap Screw; 3/8" X 2", Cap Screw; 3/8" X 2", (1 Used, 3940) (2 Used, 3960), Cap Screw; 3/8" X 2" (Use With H86656), Cap Screw; (A) 7.50-18 3/8x2", Cap Screw; 3/8" X 2" (Sub 19h3065), Cap Screw; 3/8" X 2", (Na-G, Na-L), Cap Screw; 9.525 X 50.800 mm (3/8" X 2") Longitud=124mm (4.88") Frente=M10, Cap Screw; 3/8" X 2", (Sub 19h2065), Cap Screw; (B) 3/8"X2", Cap Screw; 3/8" X 2" (Use With H110088), Cap Screw; (A) 3/8" X 2", Cap Screw; (B) 3/8" X 2", (Front Right Side Hole), Cap Screw; 3/8"X2 (Sub For 19h1726 Appl), Cap Screw; 3/8"X2" (Sub For 19h255), Cap Screw; 3/8" X 2" (For Ar74369), Cap Screw, Cap Screw; (K1) 3/8" X 2", Cap Screw; 3/8" X 2" (W/ E50102) (Sub For Y5550b, 11h236), Cap Screw; 3/8" X 2" (W/ E50102 ) (Sub For Cc16203 Or P47141), Cap Screw; 3/8" X 2" (Less Differential Lock), Cap Screw; 3/8" X 2", Diesel, Cap Screw; 3/8" X 2", (Ea-6, Ge-01), Cap Screw; 3/8" X 2", (1 Used Gasoline) (2 Used Diesel), Cap Screw; 3/8" X 2", (Code 2101, 2102, Or 2109), Cap Screw; 3/8" X 2" (Dh-01, Dh-02, Hc-D), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2" 3/8" X 2", Cap Screw; (A) 3/8"X2", Cap Screw; 3/8" X 2" (W/ E50102) (Sub For Cc16203, 11h236), Cap Screw; 3/8" X 2" (W/ E50102) (Sub For Cc16203 Or P47141), Cap Screw; 3/8" X 2" Up, For Key 3, Cap Screw; 3/8" X 2" (Slow Speed), Cap Screw; 3/8" X 2" (Use With 12h304 And 14h812), Cap Screw; 3/8" X 2", (Code 2108), Cap Screw; 3/8" X 2", (Use With Ar55094), Cap Screw; 3/8" X 2", R.H., Cap Screw; (B) 3/8" X 2", Cap Screw; 3/8"X2" (Sub For 19h1800), Cap Screw; 3/8" X 2" (For R66794), Cap Screw; 3/8" X 2", (Diesel), Cap Screw; 3/8" X 2", Right Front Side Hole, Cap Screw; 3/8" X 2" (For 50 And 60 Ft), Cap Screw; 3/8"X2" (For R66794), Cap Screw; 3/8"X2", Cap Screw; 3/8"X2" (For Al17507), Cap Screw; 3/8" X 2" 3/8" X 2" (Qrt), Cap Screw; 3/8" X 2" (Sub 19h2065), Cap Screw; 3/8" X 2" (Use With 14h812), Cap Screw; 3/8" X 2", (Use With Ar91662), Cap Screw; 3/8" X 2" (Gasoline), Cap Screw; 3/8" X 2", (Hb-G, Gh-01), Cap Screw; 3/8" X 2", Cap Screw; 3/8" X 2", (Sub 19h3065), Cap Screw; 3/8" X 2" (For Ar97712), Cap Screw; (B: Hi-Crop) 3/8" X 2", Cap Screw; 3/8" X 2", (3.7 M (12-Ft.), 22 Used Per Tooth Bar) (4.3 M (14-Ft.), 27 Used Per Tooth Bar) (4.9 M (16-Ft.), 30 Used Per Tooth Bar), Cap Screw; 9.525 X 50.800 mm (3/8" X 2"), Cap Screw; 3/8" X 2", (Use With Ar45483)	2

See all parts with full part numbers in Heavy Parts AI →

Tooth Bar [B01]

John Deere : 240 - Windrower, Platform : Tooth Bar [B01]

03***20	Bolt; (A) 3/8" X 2", Bolt; 3/8" X 2" Grass Seed Special, Bolt; 3/8" X 2", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.9 M (16-Ft.), 24 Used Per Tooth Bar), Bolt; 3/8" X 2", Bolt; 3/8" X 2" (R.H. End - 2nd And 3rd Holes), Bolt; 3/8" X 2", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.8 M (16-Ft.), 24 Used Per Tooth Bar), Bolt; 9.525 X 50.800 mm (3/8" X 2"), Bolt, Bolt; 3/8" X 2" (Use With 14h812)	0
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	1
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	1
19***26	Cap Screw; 3/8" X 2-1/4" (Round Shaft), Cap Screw; 3/8" X 2-1/4", (6211), Cap Screw; 3/8" X 2-1/4", For 5 Section, Cap Screw; 3/8" X 2-1/4", (Ea-D, De-01), Cap Screw; 3/8" X 2-1/4", (120 Used L.H.) (120 Used R.H.), Cap Screw; 3/8" X 2-1/4", (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8"X2-1/4", For 3179dl004, Cap Screw; 3/8" X 2-1/4" Low, Cap Screw; 3/8" X 2-1/4", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G), Cap Screw; (A) Roosa Master Dp,3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.9 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4, Cap Screw; (D) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" (Sub For 19h1164), Cap Screw; 3/8"X2-1/4", For 3179dl001, Cap Screw; 3/8" X 2-1/4", (Na-6, Gn-01), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.8 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8"X2-1/4", For 3179dl016, Cap Screw; 3/8" X 2-1/4", For 7 Section, Cap Screw; 3/8" X 2-1/4", (Gh-01), Cap Screw; (A: ( -Xxxxxx) 4250-00*71; 4450-0105) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (4219 Dn-02), Cap Screw; 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", W/ 24m7106, Cap Screw; 3/8" X 2-1/4", Code 6201, Cap Screw; 3/8"X2-1/4" (Sub For 19h255), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sae 8), Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (10 Used, 1217; 13 Used, 1219) Each Additional Tooth Bar, Cap Screw; 3/8" X 2-1/4", (Ha-G), Cap Screw; 3/8" X 2-1/4", (2514,9701), Cap Screw; 3/8" X 2-1/4", (Use With Single Selective Control), Cap Screw; 3/8" X 2-1/4" (Sae 8), Cap Screw; 3/8" X 2-1/4", (Code 6202), Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4" (Qrt), Cap Screw; 3/8"X2-1/4", For 3179dl013, Cap Screw; 3/8" X 2-1/4", (Use With R50415), Cap Screw; 3/8" X 2-1/4", (Ea-6), Cap Screw; 3/8 X 2-1/4", Cap Screw; 3/8" X 2-1/4", (2514,9138), Cap Screw; 3/8" X 2-1/4", (Use With Re19944), Cap Screw; (A) (B) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sub For 19h1164), Cap Screw; 3/8" X 2-1/4" (A), Cap Screw; 3/8" X 2-1/4", (Sub For 19h1819, This Application), Cap Screw; (B) 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4" (For Ar97712), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4", (To Bolt Bracket To Cab), Cap Screw; (A) 3/8"X2-1/4" \|, Cap Screw; 3/8" X 2-1/4", (9138), Cap Screw; (B) 3/8" X 2-1/4", Cap Screw; (A) 3/8" X 2-1/4", Cap Screw; (B: Power Shift Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (Na-D, Dn-01), Cap Screw; 3/8"X2"-1/4", Cap Screw; 3/8" X 2-1/4" (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8" X 2-1/4", Hs, Sae 8, 3/8" X 2-3/8" (Code 2111), Cap Screw; 3/8" X 2-1/4" (Upper), Cap Screw; 3/8" X 2-1/4", (40 Used,1217;65 Used,1219), Cap Screw; 3/8" X 2-1/2" (Sub For 19h1733), Cap Screw; 3/8" X 2-1/4", (Upper), Cap Screw; 3/8" X 2-1/4", For 503b And 506b, Cap Screw; 3/8" X 2-1/4" (To Bolt Bracket To Cab), Cap Screw; 3/8" X 2-1/4" (Sub For H86656), Cap Screw; 3/8" X 2-1/4" L.H., Cap Screw; 3/8" X 2-1/4", (Rc, Ru, Rus), Cap Screw; 3/8" X 2-1/4" Front, Cap Screw; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Less Cab), Cap Screw; 3/8" X 2-1/4", (Ha-D, Hb-D), Cap Screw; 3/8" X 2-1/4" Sub For 19h1164, Cap Screw; 3/8" X 2-1/4", (18 Used Per Tooth Bar, 3.7 M (12-Ft.) (21 Used Per Tooth Bar, 4.3 M (14-Ft.), Cap Screw; 3/8" X 2-1/4" (Use With R50415), Cap Screw; (A) 3/8"X2-1/4", Cap Screw, Cap Screw; (D) 3/8" X 2-1/4", (17'-11" Through 26'-5"), Cap Screw; (For 24m7106), Cap Screw; 3/8" X 2-1/4" (Use With 12h304 And 14h812), Cap Screw; (A) 7.50-16 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Cap Screw; 3/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 9.525 X 57.150 mm, Cap Screw; 3/8"X2-1/4" (W/ At19509), Cap Screw; 3/8" X 2-1/4" (Use With 14h812), Cap Screw; 3/8"X2-1/4" (For At19509), Cap Screw; 3/8" X 2-1/4" (Dn-03, Nb-D), Cap Screw; 3/8" X 2-1/4", For 6 Section, Cap Screw; 3/8" X 2-1/4", (9140), Cap Screw; 3/8" X 2-1/4", No. 19 Hitch, Cap Screw; 3/8" X 2-1/4", (Diesel), Cap Screw; (A) 3/8"X2-1/4" (Marked L41202), Cap Screw; 3/8" X 2-1/4", L.H., Cap Screw; 3/8" X 2-1/4", (2513,9140), Cap Screw; (A: ( -Xxxxxx)4560-0027;4760-0050;4960-00**54) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/2"	0

See all parts with full part numbers in Heavy Parts AI →

Upper Attaching Link Platform Attaching Pin (2280 Windrower) [B20]

John Deere : 240 - Windrower, Platform : Upper Attaching Link Platform Attaching Pin (2280 Windrower) [B20]

11***38	Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69*01- ) 9550sh (69*01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm	4
B3***79	Pin, Pin; (Sub For L4036n), Pin; 19.050 X 76.200 mm (3/4" X 3")	2

See all parts with full part numbers in Heavy Parts AI →

Upper Attaching Link Platform Attaching Pin (2320 And 2420 Windrower) [B21]

John Deere : 240 - Windrower, Platform : Upper Attaching Link Platform Attaching Pin (2320 And 2420 Windrower) [B21]

11***38	Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69*01- ) 9550sh (69*01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm	8
14***93	Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)	2
14***29	Nut; 3/4" Lh Thread, Nut; 3/4", Nut; 3/4" Left-Hand Thread, Nut; 3/4", L.H. Thread, Nut; (B) 3/4", Nut; 3/4", L.H., Nut; 3/4", Jam, L.H. Thread, Nut; 3/4" (Lh)	2
24***65	Washer; (A) 20,62 X 31,75 X 1,52 mm, Washer; 13/16" X 1-1/4" X 0.060", 25/32" X 1-1/4" X .075", Washer, Washer; 13/16" X 1-1/4" X 0.060", Washer; 20.625 X 31.750 X 1.524 mm (13/16" X 1-1/4" X 0.060"), Washer; 20,62 X 31,75 X 1,52 mm, Washer; 13/16" X 1-1/4" X .060", Washer; 13/16"X1-1/4"X.060"	4

See all parts with full part numbers in Heavy Parts AI →

Upper Attaching Link Platform Attaching Pin (3430 And 3830 Windrower) [B22]

John Deere : 240 - Windrower, Platform : Upper Attaching Link Platform Attaching Pin (3430 And 3830 Windrower) [B22]

11***38	Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69*01- ) 9550sh (69*01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm	8
14***93	Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)	2
14***29	Nut; 3/4" Lh Thread, Nut; 3/4", Nut; 3/4" Left-Hand Thread, Nut; 3/4", L.H. Thread, Nut; (B) 3/4", Nut; 3/4", L.H., Nut; 3/4", Jam, L.H. Thread, Nut; 3/4" (Lh)	2
24***65	Washer; (A) 20,62 X 31,75 X 1,52 mm, Washer; 13/16" X 1-1/4" X 0.060", 25/32" X 1-1/4" X .075", Washer, Washer; 13/16" X 1-1/4" X 0.060", Washer; 20.625 X 31.750 X 1.524 mm (13/16" X 1-1/4" X 0.060"), Washer; 20,62 X 31,75 X 1,52 mm, Washer; 13/16" X 1-1/4" X .060", Washer; 13/16"X1-1/4"X.060"	4

See all parts with full part numbers in Heavy Parts AI →

Wide Gauge Shoe (4.3 M (14 Ft.)) [A12]

John Deere : 240 - Windrower, Platform : Wide Gauge Shoe (4.3 M (14 Ft.)) [A12]

03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	6
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	6
24***54	Washer; 17/32" X 1-1/8" X 0.105", (Kit An193805), Washer; 11/16"X1-1/4", Washer; 17/32" X 1-1/4" X .105", Washer; 17/32" X 1-1/8" X 0.105" (A), Washer; 17/32" X 1/8" X 0,105", Washer; 17/32" X 1-1/8" X 0.105", (Sidehill), Washer; (B) 17/32" X 1/8" X .105", Washer; (A) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X .105", Washer; .105" X 17/32" X 1-1/4", Washer; 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With 19h1820), Washer; 17/32"X1-1/18"X.105", Washer; 17/32"X1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105" (30"), Washer; (A) 17/32" X1/8" X .105", Washer; (A) (D) (E) (F) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105" 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8"X.105", Washer; 17/32" X 1-1/8" X 0.105", (Use With An190565 And An190941), Washer, Washer; 13.487 X 28.575 X 2.667 mm (17/32" X 1-1/8" X 0.105"), Washer; 17/32" X 1-1/8" X.105", Washer; 11/16x1-1/4", Washer; 17/32x1 1/8", Washer; (A) (B) 17/32" X 1-1/8" X 0.105", Washer; 17/32" X 1-1/8" X 0.105", (Level Land), Washer; X, Washer; (A) (E) (F) (G) 17/32" X 1-1/8" X 0.105", Washer; (A) 17/32" X 1/8" X .105", Washer; 17/32" X 1-1/8" X 0.105", (4 Used), (6 Used, Wide Gauge Shoes), Washer; (A: ( -Xxxxxx) Serial No. 8450-00*18; 8650-00*97) 17/32" X 1-1/8" X 0.105", Washer; 17/32"X1-1/8", Washer; 17/32" X 1-1/8" X .105" (Sidehill), Washer; 17/32" X 1-1/8" X .105" (Level Land), Washer; 17/32" X 1-1/8"X.105", Washer; (B), Washer; 17/32" X 1-1/8" X 0.105", (3.7 M (12-Ft.) Platform, Less Conditioner), Washer; 13,5 X 28,57 X 2,5 mm, Washer; 17/32" X 1-1/8" X 0.105", (Kit An193804), Washer; 17/32" X 1-1/8" X .105" (Sub For 12h301), Washer; (B) 17/32"X1/8"X.105"	6
AE***60	Shoe; (4.3 mm (14-Ft.) Platform Only) (Wide Gauge Shoe), Shoe; (1) Used 3.7 M (12-Ft.) (2) Used 4.3 M (14-Ft.) And 4.9 M (16-Ft.) (Sub Ae46524), Shoe; Hard Surfacing, 4.3 M (14-Ft.) Platform, (Sub For Ae36079 And Ae37851), Shoe; 4.3 M (14-Ft.) Platform	2

See all parts with full part numbers in Heavy Parts AI →

Need a specific 240 - WINDROWER, PLATFORM part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.