John Deereplow, moldboard (semi-integral)(no series)

John Deere 2350 - PLOW, MOLDBOARD (SEMI-INTEGRAL)

Specifications · OEM parts breakdown

Search live 2350 - PLOW, MOLDBOARD (SEMI-INTEGRAL) parts Source or supply its parts

Post a parts request and compare supplier quotes.

John Deere 2350 - PLOW, MOLDBOARD (SEMI-INTEGRAL) specifications

Engine

Displacement	3917 cc (239.0 cu in.)
Bore	10.59 cm (4.17 in.)
Stroke	11.00 cm (4.33 in.)
Rated RPM	2500 RPM
Compression Ratio	17.4:1

Performance

Rear PTO Speed

540 RPM

Service capacities (summary)

Fuel Tank Capacity	90.8 l (24.0 gal)
Coolant Capacity	12.9 l (3.4 gal)

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

2350 - PLOW, MOLDBOARD (SEMI-INTEGRAL) common service parts

Part number	Part	Notes
A15242	Gasket - Element, A15169 Dry Air Cleaner, Gasket - Element, Arm	Air intake service	Check fitment →
A21476	Bolt	Lubrication service	Check fitment →
A16899	Bolt - Mtg., Filter Flange, Pin	Scheduled service item	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

All 2350 - PLOW, MOLDBOARD (SEMI-INTEGRAL) assemblies by section

Every catalogued assembly group for the John Deere 2350 - PLOW, MOLDBOARD (SEMI-INTEGRAL). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Cushion Disk Coulter [C20]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Cushion Disk Coulter [C20]

11***16	Cotter Pin; 3/16" X 1", For 6-Row, Cotter Pin; 3/16" X 1", Cotter Pin; 3/16" X 1" 3/16" X 1", Cotter Pin, Cotter Pin; 3/16" X 1", (Sub R32507), Cotter Pin; 3/16" X 1", For 40-Tooth Section, Cotter Pin; 3/16" X 1", (Sub For A18135) For 4 Section, Cotter Pin; 3/16 X 1", Cotter Pin; (A) 3/16" X 1", Cotter Pin; (D) 3/16" X 1", Cotter Pin; 3/16" X 1", For Heavy Duty Scrapers, Cotter Pin; 3/16" X 1", (Sub For A18135) For 5 Section, Cotter Pin; 3/16" X 1", (Sub For Mg87397), Cotter Pin; (B) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Sections, Cotter Pin; 3/16" X 1", For 40-Tooth Sections, Cotter Pin; (B) (C) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Section, Cotter Pin; 3/16" X 1", Extension Only, Cotter Pin; 3/16" X 1-1/2" (Sub For 11h218), Cotter Pin; 3/16" X 1", For 4w, 6n, 6w, Cotter Pin; 3/16"X1", Cotter Pin; 3/16"X3/4", Cotter Pin; 3/16"X3/8", Cotter Pin; 3/16" X 1", (4884, 4684, 5184, 5186)	2
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
11***22	Cotter Pin, Cotter Pin; 3400, 3/16" X 2", Cotter Pin; 3/16" X 1-3/4", Cotter Pin; 9/16"X2" (Sub For 11h88), Cotter Pin; 3/16" X 2", (Ru), Cotter Pin; 4.775 X 50.800 mm, Cotter Pin; 3/16" X 2", (Sub 11m7032), Cotter Pin; 3/16" X 2", (614), Cotter Pin; (A) 3/16" X 2", Outer, Cotter Pin; 4.775 X 50.800 mm, Cotter Pin; 3/16"X1-3/4", Cotter Pin; 3/16" X 2", Cotter Pin; (A) 3/16" X 2", Cotter Pin; 3/16"X2", Cotter Pin; (B) 3/16" X 2", Cotter Pin; 3/16" X 2", (814), Cotter Pin; 3/16" X 2", (Rc And St)	2
11***55	Cotter Pin; 5/16" X 2", Use A3581r Or 11h255 (Sub 11m7056), Cotter Pin; (A: For 4 And 5 Bottoms Plow) 5/16" X 2", Cotter Pin, Cotter Pin; 5/16" X 2", (Included With Cylinder), Cotter Pin; 5/16" X 2", Cotter Pin; (B) 5/16" X 2", Cotter Pin; 5/16" X 2", (Sub For 11m7056), Cotter Pin; 5/16" X 2" (Included With Cylinder), Cotter Pin; 7.925 X 50.800 mm (5/16" X 2")	2

See all parts with full part numbers in Heavy Parts AI →

Cushion Rolling Coulter 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Plain; 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Rippled; 455 And 510 Mm (18" And 20") Notched ( -1971) Anti-Friction Bearing (Clamp And Round Sha

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Cushion Rolling Coulter 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Plain; 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Rippled; 455 And 510 Mm (18" And 20") Notched ( -1971) Anti-Friction Bearing (Clamp And Round Sha

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	4
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	1
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2

See all parts with full part numbers in Heavy Parts AI →

Cushion Rolling Coulters ( -1976) 430 Mm And 455 Mm (17- And 18-Inches) Plain And Rippled Cone Bearing (Bearing, Clamp And Round Shank) [C14]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Cushion Rolling Coulters ( -1976) 430 Mm And 455 Mm (17- And 18-Inches) Plain And Rippled Cone Bearing (Bearing, Clamp And Round Shank) [C14]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	3
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	1
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2

See all parts with full part numbers in Heavy Parts AI →

Cushion Rolling Coulters (1972- ) 455 Mm And 510 Mm (18" And 20") Plain, Rippled And Notched [C12]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Cushion Rolling Coulters (1972- ) 455 Mm And 510 Mm (18" And 20") Plain, Rippled And Notched [C12]

11***16	Cotter Pin; 3/16" X 1", For 6-Row, Cotter Pin; 3/16" X 1", Cotter Pin; 3/16" X 1" 3/16" X 1", Cotter Pin, Cotter Pin; 3/16" X 1", (Sub R32507), Cotter Pin; 3/16" X 1", For 40-Tooth Section, Cotter Pin; 3/16" X 1", (Sub For A18135) For 4 Section, Cotter Pin; 3/16 X 1", Cotter Pin; (A) 3/16" X 1", Cotter Pin; (D) 3/16" X 1", Cotter Pin; 3/16" X 1", For Heavy Duty Scrapers, Cotter Pin; 3/16" X 1", (Sub For A18135) For 5 Section, Cotter Pin; 3/16" X 1", (Sub For Mg87397), Cotter Pin; (B) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Sections, Cotter Pin; 3/16" X 1", For 40-Tooth Sections, Cotter Pin; (B) (C) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Section, Cotter Pin; 3/16" X 1", Extension Only, Cotter Pin; 3/16" X 1-1/2" (Sub For 11h218), Cotter Pin; 3/16" X 1", For 4w, 6n, 6w, Cotter Pin; 3/16"X1", Cotter Pin; 3/16"X3/4", Cotter Pin; 3/16"X3/8", Cotter Pin; 3/16" X 1", (4884, 4684, 5184, 5186)	1
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
11***50	Cotter Pin; 1/4" X 2-1/2", Cotter Pin	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1

See all parts with full part numbers in Heavy Parts AI →

Disk Coulter [C18]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Disk Coulter [C18]

03***59	Bolt; 5/8" X 5-1/2"	4
11***15	Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038)	1
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	2

See all parts with full part numbers in Heavy Parts AI →

Double Pivot Hitch (1975- ) 1350 And 1450 [A13]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Double Pivot Hitch (1975- ) 1350 And 1450 [A13]

08***08	Cap Screw; (B) 3/4" X 8", Cap Screw; (A: Without Front Weight Bracket) 3/4" X 8" (4840 Tractors), Cap Screw; 3/4" X 8", 5 X 7 Frame, Cap Screw; 3/4" X 8", Cap Screw; 3/4" X 8" (For 5 X 7 Frame), Cap Screw; 3/4" X 8" Use With Cast Weight Bracket, Cap Screw; (B) 0,75" X 8", Cap Screw; (A: For 5 X 7 Frame) 3/4" X 8", Cap Screw; (B) M19,05 X 203,2, Cap Screw; (C) 3/4 X 8-In. (Sub 19h1962), Cap Screw; 3/4"X8", Cap Screw; 3/4" X 8", Use With Cast Weight Bracket	6
08***09	Cap Screw; (A) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", Cap Screw; (C) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", 5 X 7 Frame, Cap Screw; (B) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", For 55 mm (2-1/4") Square Toolbar, Cap Screw; 3/4" X 8-1/2", Assemble From Bottom Up	2
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
14***94	Nut; 3/4" 56” Construction Bucket, Nut; 3/4", For 4-Row, Nut; 3/4", North America, Nut; 3/4", 2 Or 4 Used, Nut; 3/4", (Not Requried With Metric Shafts), Nut; (A) 3/4", (Rs, Ut), Nut; (E: ( -Xxxxxx) Serial No. 8450-00*26; 8650-0031) 3/4", Nut; (D) (E) 3/4", Nut; 3/4", (Ru, Rus), Nut; (C) 3/4", Nut; 3/4", Nut; (A) 3/4", Nut; (B) (C) 3/4", Nut; 3/4", (For 25 mm (1") Sq. Standard), Nut; 3/4", For 6-Row, Nut; 3/4" 56” Dirt Bucket, Nut; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4", Nut; 3/8"X3/4", Nut; 3/4", 4010 Or 4020 Tractor, Nut; 3/4", (Sub E54521 And T33089) Hex Nut, Nut; 3/4" Lh, Nut; 3/4"Unc, Nut; (B) 3/4", (Rc), Nut; 3/4", For Bfa Or Bfa Spring-Tooth, Nut; 3/4", (Not Required With Metric Shafts), Nut; 3/4", For Use With 88 mm (3-1/2") Mole Ball, Nut; 3/4", Use Only With Ap31176 Main Frame, Nut; 19.050 mm, L.H., Nut; 3/4" L.H., Nut; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4", Nut; 3/4, Nut; 3/4" (Lh Only), Nut; (B) 3/4", Nut; 3/4", (50, 60, 70 Tractors), Nut; 3/4", 8 To 16 Used, Nut; 3/4", (Use With B32586), Nut; (D) 3/4", Nut; 3/4", Use H149361 Nut With Metric Shafts, Nut; (C: ( -Xxxxxx) 4650-0192; 4850-01*52) 3/4", Nut; 3/4", (Sub For R27646), Nut, Nut; 3/4", (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243)	6

See all parts with full part numbers in Heavy Parts AI →

Double-Acting Hydraulic Cylinder (1971-1972) 76.2 Mm X 203.2 Mm (3" Bore X 8" Stroke) [C01]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Double-Acting Hydraulic Cylinder (1971-1972) 76.2 Mm X 203.2 Mm (3" Bore X 8" Stroke) [C01]

14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	8
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	1
14***63	Nut; (B: Dubuque (T0) Esn -74*89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 3/4", Nut; 3/4" (Sub 14h902, This Application And 11h279), Nut; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 3/4", Nut; 3/4" (Use With Ah212777), Nut; (A: Dubuque (T0) Esn 7490-) (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) 3/4", Nut; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx)) 3/4", Nut; (A: Dubuque (T0) Esn -7489) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) 3/4", Nut; 3/4", (Sub For B31721), Nut; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 3/4", Nut; 3/4" (Not Used When Au10861 Or Au10810 Has Been Installed As A Replacement Part For Au42219), Nut; (Use With Ah207917), Nut; 3/4", (Not Included In Ty20280), Nut; (D) 3/4", (Sub For B31721) Lower, Nut; 3/4", Without Axle Extensions, Nut; 3/4", (Without Link Assembly), Nut; 3/4", With Axle Extensions, Nut, Nut; 3/4" (670,770), Nut; 3/4", (Sub 14h794 And 19h2084), Nut; 3/4" Unf, Rear - Mainshaft, (Sub For Et10728), Nut; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 3/4", Nut; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 3/4", Nut; 3/4", (12 Used L.H.) (12 Used R.H.), Nut; (A) 3/4", Nut; (C) 3/4", Nut; 3/4", Nut; 3/4" 3/4", Nut; 3/4", (Sub For B31721) (Use With B31719), Nut; (B: Dubuque (T0) Esn 74**90-) (C: Saran (Cd) Esn Xxxxxx-) 3/4", Nut; 3/4", Unf	1
TY***32	Hydraulic Cylinder B; 76 mm (3"), Hydraulic Cylinder B	1

See all parts with full part numbers in Heavy Parts AI →

Double-Acting Hydraulic Cylinder (1972-1974) 76.2 Mm X 203.2 Mm (3" Bore X 8" Stroke) [C02]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Double-Acting Hydraulic Cylinder (1972-1974) 76.2 Mm X 203.2 Mm (3" Bore X 8" Stroke) [C02]

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	8
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	1
AH***66	Fitting; (Sub R39112 And R26375) Plug With O-Ring, Fitting; (Sub R375r And R39112) For Independent Marker, Fitting; Incl.Key 17, Fitting; (Sub R26375 And R39112) (This Application Only), Fitting; (Sub R26375 And R39112, This Application), Fitting; (Sub R39112 And R26375, This Application), Fitting; (Sub R26375) O-Ring And (1) R39112 Plug), Fitting; (28 Foot) (Sub R375r And R39112), Fitting; (Sub R39112 And R375r), Fitting; (Sub R39112 And R26375) This Application Only, Fitting; (Sub Ae35771, This Application), Fitting; (Sub R26375 And R39112) This Application Only, Fitting; With O-Ring, Fitting; (Includes R26375), Fitting; Incl Key 20, Fitting; (Sub R26375) (O-Ring And One R39112 Plug) This Application Only, Fitting, Fitting; (Sub R375r And R39112) For Automatic Marker, Fitting; (Sub R39112 And R26375), Fitting; (A) (Sub R39112 And R26375), Fitting; (A) (B) (C), Fitting; Sub R39112 And R26375, This Application Only, Fitting; (Sub R375r And R39112), Fitting; (Sub R39112 Plug And R375r O-Ring), Fitting; (Sub R39112 And R26375, This Application) With O-Ring, Fitting; (Sub (2) R39112 And (2) R26375) Plug With O-Ring	1
PT***82	Hydraulic Cylinder K; (Sub For Ty7189)Includes Parts Marked (A), Hydraulic Cylinder K; (A) (C) (Sub For Ty7189), Hydraulic Cylinder K; (Sub For Ty7189) Repair, Hydraulic Cylinder K; (Sub For Ty7189), Hydraulic Cylinder K, Hydraulic Cylinder K; 1-1/8" Or 1-1/4" Diameter Rod, Hydraulic Cylinder K; For 1-1/8" And 1-1/4" Dia. Rod, Hydraulic Cylinder K; (For 3 X 8" Cylinder With 1-1/8" Or 1-1/4" Dia. Rod) Consists Of: (3) A4728r Packings, (2) Ty7054 Backup Washers,Ty7058 O-Ring, A3606r O-Ring, Ty7071 Rod Wiper, Ty7072 Rod Wiper And Ty7211 Backup Washer, Hydraulic Cylinder K; (Sub For Ty7189) Includes Parts Marked (A), Hydraulic Cylinder K; (For Dc38476), Hydraulic Cylinder K; Seal (Includes Parts Marked (A)) (Sub For Ty7189), Hydraulic Cylinder K; (Sub Aw32039, This Application), Hydraulic Cylinder K; Includes Parts Marked (A)	1

See all parts with full part numbers in Heavy Parts AI →

Double-Acting Hydraulic Cylinder (1974-1983) 63.5 Mm X 203.6 Mm (2-1/2" Bore X 8" Stroke) [C03]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Double-Acting Hydraulic Cylinder (1974-1983) 63.5 Mm X 203.6 Mm (2-1/2" Bore X 8" Stroke) [C03]

14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	9
15***63	Pipe Plug; (A: Straddle Mount) 3/8", Pipe Plug; 3/8", Pipe Plug, Pipe Plug; (A), Pipe Plug; 3/8", Hex. Ctsk., Pipe Plug; 3/8" (5830), Pipe Plug; 3/8" (Sub For T32936), Pipe Plug; 3/8", (Sub 15h666)	1
19***65	Cap Screw; (A) 3/8"X3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4") Longitud=95.5mm (3.76") Frente=M10, Cap Screw; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8" X 1-3/4", Cap Screw; (A: Quad-Range Transmission) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Sub For H2783b), Cap Screw; 3/8" X 1-3/4", (2 Used Single) (4 Used Dual), Cap Screw; 3/8" X 1-3/4" (Use With O.And S.), Cap Screw; (A: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Rear Hitch Option), Cap Screw; 3/8" X 1-3/4", (Na-G, Na-L), Cap Screw; (B) 3/8"X1-3/4", Cap Screw; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Chrysler No. 17*45), Cap Screw, Cap Screw; (A) (C) 3/8" X 1-3/4", (Use With Ar45483), Cap Screw; (K) 3/8" X 1-3/4", Cap Screw; (B: Hi-Crop) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", For 5 Section, Cap Screw; 3/8" X 1-3/4", (Ea-G, Ge-01), Cap Screw; 3/8" X 1-3/4", (Ea-G, Hb-G, Ge-01, Gh-01), Cap Screw; 3/8" X 1-3/4", (Illustrated), Cap Screw; 3/8" X 1-3/4", Code 2309 And 2310, Cap Screw; 3/8" X 1-3/4" (Use With C11812 And K36707), Cap Screw; 3/8" X 1-3/4", (100 Per Package) (Sub For Mg88428), Cap Screw; (C: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (4010 And 4320), Cap Screw; 3/8" X 1-3/4", (Use With 12h304 And 14h1076), Cap Screw; 3/8" X 1-3/4", (Use With R58717), Cap Screw; 3/8" X 1-3/4" (Use With Ae24403), Cap Screw; 3/8" X 1-3/4", (Beet, Bean And Vegetable), Bolt, Cap Screw; 3/8" X 1-3/4", (Na-D), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (2 Used, A) (1 Used, B), Cap Screw; 3/8" X 1-3/4", For 915, Cap Screw; 3/8" X 1-3/4", For Spike-Tooth Sections, Cap Screw; 3/8"X1-3/4", Cap Screw; (B: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4", Cap Screw; 3/8"X1-3/8", Cap Screw; (A: ( -Xxxxxx) 7710-0027; 7810-00*92) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Sae 8), Cap Screw; 2/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4" (Use With Bp12233), Cap Screw; 3/8" X 1-3/4", (2 Used Syncro-Range) (1 Used Power Shift), Cap Screw; (B), Cap Screw; 3/8" X 1-3/4", (Sub (2) 24h1309), Cap Screw; 3/8" X 1-3/4", Low, Cap Screw; (A: 2 Used Dual, 2 Used Triple) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With 14h812), Cap Screw; 3/8" X 1-3/4" (Use With 14h812), (Adjustable Rear Axle), Cap Screw; (A) 3/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Code 6401), Cap Screw; 3/8" X 1-3/4", (For An152412 Shield), Cap Screw; (A) (C) 3/8" X 1-3/4", (Fuel), Cap Screw; 3/8" X 1-3/4", (Notch Filler-Each Side), Cap Screw; 3/8" X 1-3/4" (With Dial-A-Matic), Cap Screw; 3/8" X 1-3/4", (Power Shift), Cap Screw; 3/8" X 1-3/4", Code 2306 And 2307, Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4"), Cap Screw; 3/8" X 3/4", Cap Screw; (A) 3/8" X 1-3/4", Cap Screw; (A: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (D) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; 3/8" X 1-3/4" (Hi-Crop), Cap Screw; 3/8" X 1-3/4" 3/8 Unc-2a X 1 3/4 A17d Zn, Cap Screw; 3/8" X 1-3/4" (Without Dial-A-Matic), Cap Screw; 3/8" X 1-3/4" (100 Per Package) (Sub For Mg88428), Cap Screw; (B) 3/8" X 1-3/4", (Sub For T16517), Cap Screw; 3/8" X 1-3/4", (Sae 8), Cap Screw; (A), Cap Screw; 3/8" X 1-3/4", (Less Rockshaft), Cap Screw; 3/8"X1", Cap Screw; 3/8" X 1-3/4" (Differential Lock), Cap Screw; 3/8" X 1-3/4", Use When Hitch Is Lowered, Cap Screw; 3/8" X 1", Cap Screw; 3/8" X 1-3/4", (675) 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4" (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4", (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 5440 Model Only, Cap Screw; 3/8"X1-1/4" (Sub For 19h246), Cap Screw; 3/8" X 1-3/4", (K1) (K2), Cap Screw; 3/8" X 1-3/4", R.H., Cap Screw; 3/8" X 1-3/4", For 4 Section, Cap Screw; 3/8" X 1-3/4" (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8) (Sub For 19h3217, This Application), Cap Screw; 3/8" X 1-3/4", (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Use With 12h304), Cap Screw; 3/8" X 1-3/4", (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8), (Sub For 19h3217, This Application), Cap Screw; (A) (C) 3/8"X1-3/4", Cap Screw; 3/8"-16 Unc X1-3/4", Cap Screw; 3/8" X 1-3/4" Rh, Cap Screw; 3/8" X 1-3/4", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8"-16 Nc X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4" 1524-2235mm (60"-88"), Cap Screw; 9.525 X 44.450 mm, Cap Screw; 3/8" X 1-3/4", (Sub 19h3217), Cap Screw; 3/8" X 1-3/4", (Sub For Ty7101), Cap Screw; 3/8" X 1-3/4", (2 Used Single Selective Control) (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4", (3020), Cap Screw; 3/8" X 1-3/4", (3020e), Cap Screw; 3/8" X 1-3/4", (Sub For Hmx03276), Cap Screw; 3/8"X3/4", Cap Screw; (A: Germany) 3/8" X 1-3/4"	1
R3***08	Nut; 3/4", (Sub For P47368), Nut; (Sub For A5401r), Nut; 3/4", Nut; (Sub For H34753), Nut, Nut; 19.050 mm, Nut; 3/4", (Sub For A5401r), Nut; 3/4" Unf, Nut; 3/4", Unf	1

See all parts with full part numbers in Heavy Parts AI →

Frame 4-Bottom 1350 And 1450 [A21]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Frame 4-Bottom 1350 And 1450 [A21]

08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	3
08***64	Cap Screw; 5/8" X 7-3/4", Cap Screw; 5/8" X 7-3/4" (5"X7" Frame)	1
08***48	Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 455 mm (18") Plow, Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (B) (C) 5/8" X 8-1/2", Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" 6, 8, Cap Screw; 5/8"X 8-1/2", Cap Screw; (E: 10 Weights) 5/8" X 8-1/2", Cap Screw; (B: For Wing Section) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 14 Weights, Region I, Cap Screw; 5/8"X8-1/2", Cap Screw; (F: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: 10 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (5/8" X 8-1/2") 6, 8, Cap Screw; (G: For 8 Package) 5/8" X 8-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 8-1/2", Cap Screw; (A) 5/8" X 8-1/2", Cap Screw; (B) 15.875 X 215.900 mm (5/8" X 8-1/2"), Cap Screw; (B) 5/8" X 8-1/2", Cap Screw; (C) 15.875 X 215.900 mm, Cap Screw; 5/8" X 8-1/2", For 180 X 180mm (7" X 7") Toolbars, Cap Screw; 5/8" X 8-1/2", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (C: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8"X8-1/2", Quick-Tatch Weights, Cap Screw; (B: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 6-8 Weights, North America, Cap Screw; (C) 5/8" X 8-1/2", Cap Screw; (A) 15.875 X 215.900 mm, Cap Screw; (A) 5/8"X8-1/2", Cap Screw; (A: 8-12 Weights) 5/8" X 8-1/2"	2
08***51	Cap Screw; (A) 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plow, Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plows	20

See all parts with full part numbers in Heavy Parts AI →

Frame 5-Bottom [A23]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Frame 5-Bottom [A23]

08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	3
08***64	Cap Screw; 5/8" X 7-3/4", Cap Screw; 5/8" X 7-3/4" (5"X7" Frame)	1
08***48	Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 455 mm (18") Plow, Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (B) (C) 5/8" X 8-1/2", Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" 6, 8, Cap Screw; 5/8"X 8-1/2", Cap Screw; (E: 10 Weights) 5/8" X 8-1/2", Cap Screw; (B: For Wing Section) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 14 Weights, Region I, Cap Screw; 5/8"X8-1/2", Cap Screw; (F: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: 10 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (5/8" X 8-1/2") 6, 8, Cap Screw; (G: For 8 Package) 5/8" X 8-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 8-1/2", Cap Screw; (A) 5/8" X 8-1/2", Cap Screw; (B) 15.875 X 215.900 mm (5/8" X 8-1/2"), Cap Screw; (B) 5/8" X 8-1/2", Cap Screw; (C) 15.875 X 215.900 mm, Cap Screw; 5/8" X 8-1/2", For 180 X 180mm (7" X 7") Toolbars, Cap Screw; 5/8" X 8-1/2", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (C: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8"X8-1/2", Quick-Tatch Weights, Cap Screw; (B: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 6-8 Weights, North America, Cap Screw; (C) 5/8" X 8-1/2", Cap Screw; (A) 15.875 X 215.900 mm, Cap Screw; (A) 5/8"X8-1/2", Cap Screw; (A: 8-12 Weights) 5/8" X 8-1/2"	3
08***51	Cap Screw; (A) 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plow, Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plows	23

See all parts with full part numbers in Heavy Parts AI →

Frame 6-Bottom [B01]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Frame 6-Bottom [B01]

08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	3
08***64	Cap Screw; 5/8" X 7-3/4", Cap Screw; 5/8" X 7-3/4" (5"X7" Frame)	1
08***48	Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 455 mm (18") Plow, Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (B) (C) 5/8" X 8-1/2", Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" 6, 8, Cap Screw; 5/8"X 8-1/2", Cap Screw; (E: 10 Weights) 5/8" X 8-1/2", Cap Screw; (B: For Wing Section) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 14 Weights, Region I, Cap Screw; 5/8"X8-1/2", Cap Screw; (F: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: 10 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (5/8" X 8-1/2") 6, 8, Cap Screw; (G: For 8 Package) 5/8" X 8-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 8-1/2", Cap Screw; (A) 5/8" X 8-1/2", Cap Screw; (B) 15.875 X 215.900 mm (5/8" X 8-1/2"), Cap Screw; (B) 5/8" X 8-1/2", Cap Screw; (C) 15.875 X 215.900 mm, Cap Screw; 5/8" X 8-1/2", For 180 X 180mm (7" X 7") Toolbars, Cap Screw; 5/8" X 8-1/2", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (C: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8"X8-1/2", Quick-Tatch Weights, Cap Screw; (B: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 6-8 Weights, North America, Cap Screw; (C) 5/8" X 8-1/2", Cap Screw; (A) 15.875 X 215.900 mm, Cap Screw; (A) 5/8"X8-1/2", Cap Screw; (A: 8-12 Weights) 5/8" X 8-1/2"	2
08***51	Cap Screw; (A) 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plow, Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plows	28

See all parts with full part numbers in Heavy Parts AI →

Frame 7-Bottom [B03]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Frame 7-Bottom [B03]

08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	3
08***64	Cap Screw; 5/8" X 7-3/4", Cap Screw; 5/8" X 7-3/4" (5"X7" Frame)	1
08***48	Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 455 mm (18") Plow, Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (B) (C) 5/8" X 8-1/2", Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" 6, 8, Cap Screw; 5/8"X 8-1/2", Cap Screw; (E: 10 Weights) 5/8" X 8-1/2", Cap Screw; (B: For Wing Section) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 14 Weights, Region I, Cap Screw; 5/8"X8-1/2", Cap Screw; (F: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: 10 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (5/8" X 8-1/2") 6, 8, Cap Screw; (G: For 8 Package) 5/8" X 8-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 8-1/2", Cap Screw; (A) 5/8" X 8-1/2", Cap Screw; (B) 15.875 X 215.900 mm (5/8" X 8-1/2"), Cap Screw; (B) 5/8" X 8-1/2", Cap Screw; (C) 15.875 X 215.900 mm, Cap Screw; 5/8" X 8-1/2", For 180 X 180mm (7" X 7") Toolbars, Cap Screw; 5/8" X 8-1/2", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (C: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8"X8-1/2", Quick-Tatch Weights, Cap Screw; (B: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 6-8 Weights, North America, Cap Screw; (C) 5/8" X 8-1/2", Cap Screw; (A) 15.875 X 215.900 mm, Cap Screw; (A) 5/8"X8-1/2", Cap Screw; (A: 8-12 Weights) 5/8" X 8-1/2"	2
08***51	Cap Screw; (A) 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plow, Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plows	30

See all parts with full part numbers in Heavy Parts AI →

Frame 8-Bottom 1450, 2350 And 2450 [B05]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Frame 8-Bottom 1450, 2350 And 2450 [B05]

08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	3
08***64	Cap Screw; 5/8" X 7-3/4", Cap Screw; 5/8" X 7-3/4" (5"X7" Frame)	1
08***48	Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 455 mm (18") Plow, Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (B) (C) 5/8" X 8-1/2", Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" 6, 8, Cap Screw; 5/8"X 8-1/2", Cap Screw; (E: 10 Weights) 5/8" X 8-1/2", Cap Screw; (B: For Wing Section) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 14 Weights, Region I, Cap Screw; 5/8"X8-1/2", Cap Screw; (F: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: 10 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (5/8" X 8-1/2") 6, 8, Cap Screw; (G: For 8 Package) 5/8" X 8-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 8-1/2", Cap Screw; (A) 5/8" X 8-1/2", Cap Screw; (B) 15.875 X 215.900 mm (5/8" X 8-1/2"), Cap Screw; (B) 5/8" X 8-1/2", Cap Screw; (C) 15.875 X 215.900 mm, Cap Screw; 5/8" X 8-1/2", For 180 X 180mm (7" X 7") Toolbars, Cap Screw; 5/8" X 8-1/2", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (C: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8"X8-1/2", Quick-Tatch Weights, Cap Screw; (B: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 6-8 Weights, North America, Cap Screw; (C) 5/8" X 8-1/2", Cap Screw; (A) 15.875 X 215.900 mm, Cap Screw; (A) 5/8"X8-1/2", Cap Screw; (A: 8-12 Weights) 5/8" X 8-1/2"	2
08***51	Cap Screw; (A) 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plow, Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plows	34

See all parts with full part numbers in Heavy Parts AI →

Front Furrow Axle And Caster Wheel (1977- ) 2350 And 2450 [B19]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Front Furrow Axle And Caster Wheel (1977- ) 2350 And 2450 [B19]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	6
14***02	Nut; (B: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4", Slotted, Fine Thread, Nut; 1/4", Nut; 3/4" 3/4" Slotted, Nut; 3/4" 3/4", Slotted, Nut; 3/4", Unf, Nut; (C: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4'(For Al34936), Nut; 3/4" (Slotted), Nut; 3/4" 2wd, Nut; (A: Slotted) 3/4", Nut; 18mm, Nut; 3/4", (Slotted), Nut; 3/4", (Sub 14h1086), Nut; 3/4" 3/4", Nut; 3/4", Unf., Nut; 5/8", Nut; Slotted, Nut; 3/4" 3/4" Unf, Nut; No. 0.210, Nut; 3/4", Nut; 3/4", (U/W Heavy Duty Dual Axle), Nut; 3/4" Hex Slotted, Nut; (A: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4"(For Al34935), Nut; (A), Nut; (A) 3/4", Nut; (A) (B) 3/4", Nut; Rh, Lh, Nut; 19.050 mm (3/4") 3/4", Slotted, Nut; 3/4" (Sub 14h902,This Application And11h237), Nut; 3/4', Slotted, Nut; 5/8", Rh, Lh, Nut; (B: (Regular Duty) Two-Wheel Drive) (C: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/8", Td, Nut; 5/8" Rh, Lh, Nut; (A: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4" (Use With An232006), Nut; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 3/4", Nut; 3/4", Unf, Slotted, Nut; 19.050 mm (3/4"), Nut; 3/4" Slotted, Nut; 3/4" Unf, Nut, Nut; 3/4" Unf, Slotted, Nut; Rh, 5/8", Nut; 19.050 mm (3/4") (Sub 14h1086), Nut; 3/4" (Sub For 14h904, This Application) (Use With 11h237), Nut; 3/4", Slotted, Unf, Nut; 3/4", Slotted, Nut; 3/4" Unf Slotted	1
19***06	Screw; (B: Used Without Front Stabilizer Wheels) 5/8" X 2", Screw; 5/8" X 2" (Hs, Sae 8), Screw; (B) 5/8" X 2", Hs, Sae 8, Screw; 5/8" X 2" (Hs, Sae 8) (36 Conditioner), Screw; 5/8" X 2" (Hs, Sae 8) Coarse Thread, Screw; 15.875 X 50.800 mm, Screw; 5/8" X 2" Rear, Screw; 5/8" X 2", Hs, Sae 8, Screw, Screw; (B) 5/8" X 2" (Hs, Sae 8), Screw; 15.875 X 50.800 mm (5/8" X 2"), Screw; 5/8" X 2" Wing Hinge, Screw; 5/8" X 2", Screw; 5/8" X 2" (36 Ft And 44 Ft Main Frame Extension Hinge, Rear Holes), Screw; 5/8" X 2" (Hs, Sae 8) Front Main Frame Hinge, Screw; 5/8" X 2", (Hs, Sae 8) (36 Conditioner), Screw; 5/8" X 2", Used Without Front Stabilizer Wheels, Screw; Hs Sae 8, Cap Screw; 5/8" X 2", Screw; 5/8" X 2", (Hs, Sae 8), Screw; (A) 5/8" X 2" (Hs, Sae 8), Screw; 0,625" X 2,0", Screw; 5/8" X 2" Hs=10.9, Sae 8, Screw; 5/8" X 2" (28 Ft Main Frame Extension Hinge), Screw; (A) 5/8" X 2", Screw; 5/8" X 2" Front Main Frame Hinge, Screw; 5/8" X 2", L.H., Hs, Sae 8, Screw; 5/8" X 2", For 760 And 790, Screw; 5/8" X 2" (Sae 8), Screw; 5/8" X 2" Hs, Sae 8, (Side Frames), Screw; 5/8" X 2", (35 Conditioner) (Hs, Sae 8), Screw; 5/8" X 2" (Hs, Sae 8) (2840, 2940, 2950, 3130, 3140), Screw; 5/8" X 2" Hs 8 Sae, Cap Screw, Screw; 5/8" X 2", (Sub For 19h1734), Screw; 5/8" X 2" (Lh Side), Screw; 5/8" X 2", For 3.7 M (12') And 4.6 M (15') Size., Screw; 5/8" X 2" Hs, Sae 8, Screw; 5/8" X 2" Not Illustrated, Screw; 5/8"X2", Screw; (C) (D) 5/8" X 2" (Hs, Sae 8)	4

See all parts with full part numbers in Heavy Parts AI →

Front Furrow Axle And Wheel ( -1977) 2350 And 2450 [B17]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Front Furrow Axle And Wheel ( -1977) 2350 And 2450 [B17]

08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	3
08***51	Cap Screw; (A) 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plow, Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plows	4
11***11	Cotter Pin; 1/8" X 1" (Sub For 11h236), Cotter Pin; (A), Cotter Pin; 1/8" X 3/4", 2510, 3010, 3020, 4010, Or 4020 Tractors, Cotter Pin; 1/8"X3/4", Cotter Pin; 1/8" X 3/4", Heavy-Duty Scraper Attachments, Cotter Pin; 1/8" X 3/4", 4020 Or 4010 Tractor, Cotter Pin; 1/8"X5/8" (Sub For 11h38), Cotter Pin; 1/8"X1/4", Cotter Pin; (C) 1/8"X3/4", Cotter Pin; 1/8"X5/8", Cotter Pin; 1/8" X 3/4", (Stainless Steel), Cotter Pin; (C) 1/8" X 3/4", Cotter Pin; 1/8"X 3/4", Cotter Pin; 1/8" X 3/4", Heavy-Duty Scraper Attachment, Cotter Pin; 1/8" X 3/4", (Optional), Cotter Pin; 1/8" X 3/4", 4010 Or 4020 Tractor, Cotter Pin; 1/8" X 3/4", For Heavy-Duty Scraper Attachments, Cotter Pin; (B) 1/8" X 3/4", Cotter Pin; (A) (D) 1/8" X 3/4", Cotter Pin; (D) 1/8" X 3/4", Cotter Pin; (A) 1/8" X 3/4", Cotter Pin; 1/8" X 3/4", (Sub 11m1383), Cotter Pin; 1/8" X 3/4" (Stainless Steel), Cotter Pin, Cotter Pin; 1/8" X 3/4", Cotter Pin; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 1/8" X 3/4", Cotter Pin; 1/8" X 3/4" (Sub 11m1383), Cotter Pin; 1/8" X 3/4" (Sub 11m1383) (Stainless Steel), Cotter Pin; (Sub 11m1383), Cotter Pin; 1/8" X 3/4", Tire Skip Spacing	1
11***14	Cotter Pin; 5/16" X 1-1/2", Cotter Pin; 5/16" X 1-1/2", (Sub For 11h215)	2

See all parts with full part numbers in Heavy Parts AI →

Gauge Wheel And Axle [B20]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Gauge Wheel And Axle [B20]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	1
14***02	Nut; (B: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4", Slotted, Fine Thread, Nut; 1/4", Nut; 3/4" 3/4" Slotted, Nut; 3/4" 3/4", Slotted, Nut; 3/4", Unf, Nut; (C: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4'(For Al34936), Nut; 3/4" (Slotted), Nut; 3/4" 2wd, Nut; (A: Slotted) 3/4", Nut; 18mm, Nut; 3/4", (Slotted), Nut; 3/4", (Sub 14h1086), Nut; 3/4" 3/4", Nut; 3/4", Unf., Nut; 5/8", Nut; Slotted, Nut; 3/4" 3/4" Unf, Nut; No. 0.210, Nut; 3/4", Nut; 3/4", (U/W Heavy Duty Dual Axle), Nut; 3/4" Hex Slotted, Nut; (A: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4"(For Al34935), Nut; (A), Nut; (A) 3/4", Nut; (A) (B) 3/4", Nut; Rh, Lh, Nut; 19.050 mm (3/4") 3/4", Slotted, Nut; 3/4" (Sub 14h902,This Application And11h237), Nut; 3/4', Slotted, Nut; 5/8", Rh, Lh, Nut; (B: (Regular Duty) Two-Wheel Drive) (C: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/8", Td, Nut; 5/8" Rh, Lh, Nut; (A: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4" (Use With An232006), Nut; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 3/4", Nut; 3/4", Unf, Slotted, Nut; 19.050 mm (3/4"), Nut; 3/4" Slotted, Nut; 3/4" Unf, Nut, Nut; 3/4" Unf, Slotted, Nut; Rh, 5/8", Nut; 19.050 mm (3/4") (Sub 14h1086), Nut; 3/4" (Sub For 14h904, This Application) (Use With 11h237), Nut; 3/4", Slotted, Unf, Nut; 3/4", Slotted, Nut; 3/4" Unf Slotted	1

See all parts with full part numbers in Heavy Parts AI →

Hitch ( -1971) 1350 And 1450 [A08]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hitch ( -1971) 1350 And 1450 [A08]

08***08	Cap Screw; (B) 3/4" X 8", Cap Screw; (A: Without Front Weight Bracket) 3/4" X 8" (4840 Tractors), Cap Screw; 3/4" X 8", 5 X 7 Frame, Cap Screw; 3/4" X 8", Cap Screw; 3/4" X 8" (For 5 X 7 Frame), Cap Screw; 3/4" X 8" Use With Cast Weight Bracket, Cap Screw; (B) 0,75" X 8", Cap Screw; (A: For 5 X 7 Frame) 3/4" X 8", Cap Screw; (B) M19,05 X 203,2, Cap Screw; (C) 3/4 X 8-In. (Sub 19h1962), Cap Screw; 3/4"X8", Cap Screw; 3/4" X 8", Use With Cast Weight Bracket	4
08***10	Cap Screw; 7/8" X 8-1/2", (5 Bottoms Plow), Cap Screw; 7/8" X 8-1/2", Cap Screw; 7/8" X 8-1/2", (7 Bottoms Plow), Cap Screw; 7/8" X 8-1/2", (6 Bottoms Plow)	3
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	10

See all parts with full part numbers in Heavy Parts AI →

Hitch (1972-1973) 1350 And 1450 [A09]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hitch (1972-1973) 1350 And 1450 [A09]

08***48	Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 455 mm (18") Plow, Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (B) (C) 5/8" X 8-1/2", Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" 6, 8, Cap Screw; 5/8"X 8-1/2", Cap Screw; (E: 10 Weights) 5/8" X 8-1/2", Cap Screw; (B: For Wing Section) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 14 Weights, Region I, Cap Screw; 5/8"X8-1/2", Cap Screw; (F: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: 10 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (5/8" X 8-1/2") 6, 8, Cap Screw; (G: For 8 Package) 5/8" X 8-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 8-1/2", Cap Screw; (A) 5/8" X 8-1/2", Cap Screw; (B) 15.875 X 215.900 mm (5/8" X 8-1/2"), Cap Screw; (B) 5/8" X 8-1/2", Cap Screw; (C) 15.875 X 215.900 mm, Cap Screw; 5/8" X 8-1/2", For 180 X 180mm (7" X 7") Toolbars, Cap Screw; 5/8" X 8-1/2", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (C: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8"X8-1/2", Quick-Tatch Weights, Cap Screw; (B: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 6-8 Weights, North America, Cap Screw; (C) 5/8" X 8-1/2", Cap Screw; (A) 15.875 X 215.900 mm, Cap Screw; (A) 5/8"X8-1/2", Cap Screw; (A: 8-12 Weights) 5/8" X 8-1/2"	1
08***09	Cap Screw; (A) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", Cap Screw; (C) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", 5 X 7 Frame, Cap Screw; (B) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", For 55 mm (2-1/4") Square Toolbar, Cap Screw; 3/4" X 8-1/2", Assemble From Bottom Up	4
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	8

See all parts with full part numbers in Heavy Parts AI →

Hitch (1973-1975) 1350 And 1450 Plows [A10]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hitch (1973-1975) 1350 And 1450 Plows [A10]

08***48	Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 455 mm (18") Plow, Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (B) (C) 5/8" X 8-1/2", Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" 6, 8, Cap Screw; 5/8"X 8-1/2", Cap Screw; (E: 10 Weights) 5/8" X 8-1/2", Cap Screw; (B: For Wing Section) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 14 Weights, Region I, Cap Screw; 5/8"X8-1/2", Cap Screw; (F: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: 10 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (5/8" X 8-1/2") 6, 8, Cap Screw; (G: For 8 Package) 5/8" X 8-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 8-1/2", Cap Screw; (A) 5/8" X 8-1/2", Cap Screw; (B) 15.875 X 215.900 mm (5/8" X 8-1/2"), Cap Screw; (B) 5/8" X 8-1/2", Cap Screw; (C) 15.875 X 215.900 mm, Cap Screw; 5/8" X 8-1/2", For 180 X 180mm (7" X 7") Toolbars, Cap Screw; 5/8" X 8-1/2", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (C: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8"X8-1/2", Quick-Tatch Weights, Cap Screw; (B: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 6-8 Weights, North America, Cap Screw; (C) 5/8" X 8-1/2", Cap Screw; (A) 15.875 X 215.900 mm, Cap Screw; (A) 5/8"X8-1/2", Cap Screw; (A: 8-12 Weights) 5/8" X 8-1/2"	1
08***09	Cap Screw; (A) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", Cap Screw; (C) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", 5 X 7 Frame, Cap Screw; (B) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", For 55 mm (2-1/4") Square Toolbar, Cap Screw; 3/4" X 8-1/2", Assemble From Bottom Up	4
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	8

See all parts with full part numbers in Heavy Parts AI →

Hitch Crossbar Category 2 (1975- ) Category 3n (1976- ) For Double-Pivot Hitch 1350 And 1450 [A11]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hitch Crossbar Category 2 (1975- ) Category 3n (1976- ) For Double-Pivot Hitch 1350 And 1450 [A11]

11***49	Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2"	1
14***48	Bolt, Nut, Nut; 25.400 mm, Bolt; 1", Nut; 25.400 mm (1"), Nut; 1", Bolt; 1", Category 3n, Nut; 1", (Sub For K40018), Bolt; 1", (Power Rear Wheel Drive), Bolt; 1", (Rg6)	1
14***94	Nut; 3/4" 56” Construction Bucket, Nut; 3/4", For 4-Row, Nut; 3/4", North America, Nut; 3/4", 2 Or 4 Used, Nut; 3/4", (Not Requried With Metric Shafts), Nut; (A) 3/4", (Rs, Ut), Nut; (E: ( -Xxxxxx) Serial No. 8450-00*26; 8650-0031) 3/4", Nut; (D) (E) 3/4", Nut; 3/4", (Ru, Rus), Nut; (C) 3/4", Nut; 3/4", Nut; (A) 3/4", Nut; (B) (C) 3/4", Nut; 3/4", (For 25 mm (1") Sq. Standard), Nut; 3/4", For 6-Row, Nut; 3/4" 56” Dirt Bucket, Nut; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4", Nut; 3/8"X3/4", Nut; 3/4", 4010 Or 4020 Tractor, Nut; 3/4", (Sub E54521 And T33089) Hex Nut, Nut; 3/4" Lh, Nut; 3/4"Unc, Nut; (B) 3/4", (Rc), Nut; 3/4", For Bfa Or Bfa Spring-Tooth, Nut; 3/4", (Not Required With Metric Shafts), Nut; 3/4", For Use With 88 mm (3-1/2") Mole Ball, Nut; 3/4", Use Only With Ap31176 Main Frame, Nut; 19.050 mm, L.H., Nut; 3/4" L.H., Nut; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4", Nut; 3/4, Nut; 3/4" (Lh Only), Nut; (B) 3/4", Nut; 3/4", (50, 60, 70 Tractors), Nut; 3/4", 8 To 16 Used, Nut; 3/4", (Use With B32586), Nut; (D) 3/4", Nut; 3/4", Use H149361 Nut With Metric Shafts, Nut; (C: ( -Xxxxxx) 4650-0192; 4850-01*52) 3/4", Nut; 3/4", (Sub For R27646), Nut, Nut; 3/4", (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243)	5
19***97	Cap Screw; 1" X 4-1/2", Category 3n, Cap Screw; 1" X 4-1/2", Cap Screw; 1" X 4-1/2", For Tractors Equipped With 800 Series 3-Point Hitch	1

See all parts with full part numbers in Heavy Parts AI →

Hitch Crossbar Category 3 (1975- ) For Double-Pivot Hitch 1350 And 1450 Plows [A12]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hitch Crossbar Category 3 (1975- ) For Double-Pivot Hitch 1350 And 1450 Plows [A12]

14***94	Nut; 3/4" 56” Construction Bucket, Nut; 3/4", For 4-Row, Nut; 3/4", North America, Nut; 3/4", 2 Or 4 Used, Nut; 3/4", (Not Requried With Metric Shafts), Nut; (A) 3/4", (Rs, Ut), Nut; (E: ( -Xxxxxx) Serial No. 8450-00*26; 8650-0031) 3/4", Nut; (D) (E) 3/4", Nut; 3/4", (Ru, Rus), Nut; (C) 3/4", Nut; 3/4", Nut; (A) 3/4", Nut; (B) (C) 3/4", Nut; 3/4", (For 25 mm (1") Sq. Standard), Nut; 3/4", For 6-Row, Nut; 3/4" 56” Dirt Bucket, Nut; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4", Nut; 3/8"X3/4", Nut; 3/4", 4010 Or 4020 Tractor, Nut; 3/4", (Sub E54521 And T33089) Hex Nut, Nut; 3/4" Lh, Nut; 3/4"Unc, Nut; (B) 3/4", (Rc), Nut; 3/4", For Bfa Or Bfa Spring-Tooth, Nut; 3/4", (Not Required With Metric Shafts), Nut; 3/4", For Use With 88 mm (3-1/2") Mole Ball, Nut; 3/4", Use Only With Ap31176 Main Frame, Nut; 19.050 mm, L.H., Nut; 3/4" L.H., Nut; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4", Nut; 3/4, Nut; 3/4" (Lh Only), Nut; (B) 3/4", Nut; 3/4", (50, 60, 70 Tractors), Nut; 3/4", 8 To 16 Used, Nut; 3/4", (Use With B32586), Nut; (D) 3/4", Nut; 3/4", Use H149361 Nut With Metric Shafts, Nut; (C: ( -Xxxxxx) 4650-0192; 4850-01*52) 3/4", Nut; 3/4", (Sub For R27646), Nut, Nut; 3/4", (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243)	2
19***27	Cap Screw; 3/4" X 4-3/4" (Sae 8), Cap Screw; (A) (B) 3/4" X 4-3/4", Cap Screw; 3/4" X 4-3/4", Cap Screw; 3/4" X 4-3/4" Mainframe, Cap Screw, Cap Screw; (A) 3/4" X 4-3/4" Hs, Sae 8, Inner, Cap Screw; (A) 3/4"X4-3/4", Cap Screw; 3/4" X 4-3/4" (Hs, Sae 8) (32'5' Only), Cap Screw; 3/4"X4-3/4", Cap Screw; 3/4" X 4-3/4" (Hs=10.9, Sae 8), Cap Screw; (B) 3/4" X 4-3/4" Hs, Sae 8, Cap Screw; 3/4" X 4-3/4" Hs 8 Sae, Cap Screw; 3/4" X 4-3/4" (Hs, Sae 8), Cap Screw; 3/4" X 4-3/4" (Sub For 19h2682), Cap Screw; 3/4"X4-3/4" (Sae 8), Cap Screw; 3/4" X 4-3/4", Hs, Sae 8, Cap Screw; (A) 3/4" X 4-3/4", Cap Screw; 3/4" X 4-3/4" Main Frame, Cap Screw; 3/4" X 4-3/4" (Hs, Sae 8) (32'5" Only), Cap Screw; (A) 3/4" X 4-3/4", Hs, Sae 8 Inner, Cap Screw; 3/4" X 4-3/4", Hs, Sae 8 (16.1" Rear Tire), Cap Screw; (B: (Xxxxxx- ) 4050-00*36; 4250-01*91) 3/4" X 4-3/4" Hs, Sae 8, Cap Screw; 3/4"X4-3/4" (Sub For 19h2000)	2
A2***01	Pin Fastener; Category 2 Or 3 With Quik-Coupler, Pin Fastener	2
AA***30	Hitch	1

See all parts with full part numbers in Heavy Parts AI →

Hitch Tube 1350 And 1450 [A15]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hitch Tube 1350 And 1450 [A15]

08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	4
08***51	Cap Screw; (A) 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plow, Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plows	4
11***15	Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038)	2
11***21	Cotter Pin, Cotter Pin; 3/8" X 2-1/2", Cotter Pin; 3/8" X 2-1/2", Use With Quik-Coupler, Cotter Pin; 3/8" X 2-1/2" (Use With T125931 Or T125926), Cotter Pin; 3/8" X 2-1/2" (Use With Au42333 Or T125926)	2

See all parts with full part numbers in Heavy Parts AI →

Hitch Tube And Hitch 4-, 5-, And 6-Bottom 2350 And 2450 [A17]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hitch Tube And Hitch 4-, 5-, And 6-Bottom 2350 And 2450 [A17]

08***39	Cap Screw; 5/8" X 7-1/4", Cap Screw; 5/8"X7-1/4"	4
08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	3
08***48	Cap Screw; 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 455 mm (18") Plow, Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (B) (C) 5/8" X 8-1/2", Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" 6, 8, Cap Screw; 5/8"X 8-1/2", Cap Screw; (E: 10 Weights) 5/8" X 8-1/2", Cap Screw; (B: For Wing Section) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 14 Weights, Region I, Cap Screw; 5/8"X8-1/2", Cap Screw; (F: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: 10 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2" (5/8" X 8-1/2") 6, 8, Cap Screw; (G: For 8 Package) 5/8" X 8-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 8-1/2", Cap Screw; (A) 5/8" X 8-1/2", Cap Screw; (B) 15.875 X 215.900 mm (5/8" X 8-1/2"), Cap Screw; (B) 5/8" X 8-1/2", Cap Screw; (C) 15.875 X 215.900 mm, Cap Screw; 5/8" X 8-1/2", For 180 X 180mm (7" X 7") Toolbars, Cap Screw; 5/8" X 8-1/2", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (C: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8"X8-1/2", Quick-Tatch Weights, Cap Screw; (B: 8 Weights) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", 6-8 Weights, North America, Cap Screw; (C) 5/8" X 8-1/2", Cap Screw; (A) 15.875 X 215.900 mm, Cap Screw; (A) 5/8"X8-1/2", Cap Screw; (A: 8-12 Weights) 5/8" X 8-1/2"	1
11***15	Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038)	1

See all parts with full part numbers in Heavy Parts AI →

Hitch Tube And Hitch 7- And 8-Bottom 2350 And 2450 [A19]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hitch Tube And Hitch 7- And 8-Bottom 2350 And 2450 [A19]

08***39	Cap Screw; 5/8" X 7-1/4", Cap Screw; 5/8"X7-1/4"	4
08***36	Cap Screw; (C) 5/8" X 8", Cap Screw; (A) 5/8"X8", Cap Screw; 5/8" X 8", Cap Screw; 5/8"X8", Cap Screw; (D) (E) 5/8" X 8", Cap Screw; 5/8" X 8", 405 mm And 510 mm (18" And 20") Plow, Cap Screw; 5/8" X 8", 455 mm And 510 mm (18" And 20") Plows, Cap Screw; (A) 5/8" X 8", Cap Screw; (B) 5/8" X 8"	3
11***15	Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038)	1
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Hoses And Tubes 4-, 5- And 6-Bottom [B21]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hydraulic Hoses And Tubes 4-, 5- And 6-Bottom [B21]

37***10	Screw; (A) (B) (D) 3/8" X 7/8", Screw; 3/8" X 7/8", Screw; (C) (D) 3/8" X 7/8"	3
A1***45	Grommet; (F)	0
A1***46	Bracket; (No Longer Available)	1
A1***95	Tube, Axle Pin; Pin - Pivot, Rear Axle	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Hoses And Tubes 7- And 8-Bottom [B23]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Hydraulic Hoses And Tubes 7- And 8-Bottom [B23]

37***10	Screw; (A) (B) (D) 3/8" X 7/8", Screw; 3/8" X 7/8", Screw; (C) (D) 3/8" X 7/8"	3
A1***45	Grommet; (F)	0
A1***46	Bracket; (No Longer Available)	1
A1***95	Tube, Axle Pin; Pin - Pivot, Rear Axle	1

See all parts with full part numbers in Heavy Parts AI →

Labels [A12]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Labels [A12]

A1***78	Serial Number Plate; (Sub A25681) Model Designation "1350-1450" Inside And Up Front Of Hitch Tube	1
A1***79	Decal; (Sub A25681) Model Designation "2350-2450" Inside And Up Front Of Hitch Tube	1
A1***60	Safety Sign; "Warning" Centered On Top Of Hitch Tube, Safety Sign; "Warning", Centered On Top Of Hitch Tube Over Angles	1
A2***81	Label; (Sub A28529) Model Designation Kit, Label; "Model Designation", Label; "Model Designation" Front Right Side Main Frame, Label; Model Designation, Label, Label; (31 mm) Model Designation Kit), Label; Designation Kit, Label; Kit, Model Designation, For Main Frame, Label; (Sub For B31455) Kit, Model Designation, Label; "Model Designation" - Located On R.H. End And Rear Of Tube, Label; "Designation" Kit, Label; Kit, Model Designation, Label; "Designation", Label; "Model Designation", 30 mm (1-1/4"), Label; (Sub For B30931 And B31463) (Sub B30932 And B31464) For 1260 Or 1280 Planters Mount On Side Panel Of Main Frame., Label; Kit, Model Designation, 32 mm (1-1/4"), Label; Kit, Model Designation On Truss Box, Label; Kit, Model Designation, Outside And Front Of Truss Tube	1

See all parts with full part numbers in Heavy Parts AI →

Rear Axle And Wheel ( -1971) [B13]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Rear Axle And Wheel ( -1971) [B13]

11***14	Cotter Pin; 5/16" X 1-1/2", Cotter Pin; 5/16" X 1-1/2", (Sub For 11h215)	2
11***15	Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038)	1
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
11***21	Cotter Pin, Cotter Pin; 3/8" X 2-1/2", Cotter Pin; 3/8" X 2-1/2", Use With Quik-Coupler, Cotter Pin; 3/8" X 2-1/2" (Use With T125931 Or T125926), Cotter Pin; 3/8" X 2-1/2" (Use With Au42333 Or T125926)	4

See all parts with full part numbers in Heavy Parts AI →

Rear Axle And Wheel (1971- ) [B15]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Rear Axle And Wheel (1971- ) [B15]

11***14	Cotter Pin; 5/16" X 1-1/2", Cotter Pin; 5/16" X 1-1/2", (Sub For 11h215)	2
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	1
11***21	Cotter Pin, Cotter Pin; 3/8" X 2-1/2", Cotter Pin; 3/8" X 2-1/2", Use With Quik-Coupler, Cotter Pin; 3/8" X 2-1/2" (Use With T125931 Or T125926), Cotter Pin; 3/8" X 2-1/2" (Use With Au42333 Or T125926)	4
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	1

See all parts with full part numbers in Heavy Parts AI →

Reflector And Bracket [C19]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Reflector And Bracket [C19]

14***78	Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01*00; 4255-0100; 4455-0200) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-0030; 8760-0021; 8960-00*36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 10	2
21***48	Screw; 0.190" X 3/4", (Use With Pt9543 Bracket), Screw; 0.190" X 3/4", Red And Amber, Screw; 0.190" X 3/4", Screw; 0.190" X 3/4", Use With Amber And Red Reflectors, Screw; 0.190" X 3/4", Use With Amber And Red Reflector, Screw; 0.190" X 3/4" (A), Screw; Red And Amber, Screw; (A) 0.190" X 3/4", Screw; 0.190" X 3/4", Canada Only, Screw; 4.826 X 19.050 mm, Screw; 4.826 X 19.050 mm (0.190" X 3/4")	2
21***17	Screw; 0.190" X 5/8" (Use With T23460 And T23461 And Ar72960), Screw; 0.190" X 5/8" (Use With Ar72960, T23460 And T23461), Screw; 0.190" X 5/8", Use Wiih Red Reflector, Screw; Red Only, Screw; 0.190" X 5/8", (Diesel, Less Cab), Screw; 4.826 X 15.875 mm (0.190" X 5/8"), Screw; 4.826 X 15.875 mm (0.190" X 5/8"), Screw; (B), Screw; 0.190" X 5/8", (Use With T23460, T23461 And T23463), Screw; 0.190" X 5/8", Screw; 0.190" X 5/8", ( Ffsb107918 No Longer Available), Screw; 0.190" X 5/8", Use With Red Reflectors Only, Screw; No. 10 X 5/8", Screw; 0.190" X 5/8", Mercury, Screw; 0.190" X 5/8", Screw; 0.190" X 5/8", (Sub For Ty4168), Screw; (A) 0.190" X 5/8", Screw; 0.190" X 5/8", Use With Red Reflector Only, Screw; 0.190" X 5/8", Red Only, Screw, Screw; No.10x5/8", Screw; No.10 X 5/8", Screw; 0.190" X 5/8" (Use With T23460 And T23461), Screw; 0.190" X 5/8" (Use With T23462 And T23463), Screw; 0.190" X 5/8", (Use With T23462 And T23463), Screw; 0.190" X 5/8", (Use With T23460 And T23461), Screw; (B) 0.190" X 5/8", Screw; 0.190" X 5/8" (Use With T23460, T23461 And T23463), Screw; 0.190" X 5/8", Use With Red Reflector, Screw; 0.190" X 5/8", Control, Screw; 0.190" X 5/8" (Use With T23460, T23461 And Ar72960), Screw; No 10 X 5/8"	2
A2***66	Bracket; (Sub Aa36031), Bracket; 3/4" X 2" Cap Screw 19h1768 Used To Attach To Outer Frame Plate Of 9-Standard Aa27789 Frame, Bracket	1

See all parts with full part numbers in Heavy Parts AI →

Rolling Coulters 430 Mm, 455 Mm, And 510 Mm (17", 18", And 19") Plain 430 Mm, 455 Mm, And 510 Mm (17", 18", And 19") Rippled 455 Mm And 510 Mm (18" And 20") Notched Anti-Friction Bearing (Clamp And Round Shank) [C10]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Rolling Coulters 430 Mm, 455 Mm, And 510 Mm (17", 18", And 19") Plain 430 Mm, 455 Mm, And 510 Mm (17", 18", And 19") Rippled 455 Mm And 510 Mm (18" And 20") Notched Anti-Friction Bearing (Clamp And Round Shank) [C10]

03***03	Bolt, Bolt; 5/8" X 2" Cb5nc0.62x02.00, Bolt; 5/8" X 2", Bolt; Rd. Hd. 5/8" X 2", Bolt; 0,625" X 2,0", Bolt; 5/8" X 2", (Use With N184323), Bolt; 5/8" X 2", (2510, 3010, 3020, 4010 And 4020 Tractors)	1
03***56	Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors)	1
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
12***93	U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16"	1

See all parts with full part numbers in Heavy Parts AI →

Rolling Coulters 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Plain 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Rippled Cone Bearing (Bearing, Clamp, And Flat Shank) [C16]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Rolling Coulters 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Plain 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Rippled Cone Bearing (Bearing, Clamp, And Flat Shank) [C16]

12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	4
16***70	Rivet; 3/8" X 1-3/4"	6
19***63	Cap Screw; 5/8" X 3", (Use With Ar53880 Knuckle), Cap Screw; (A) 5/8"X3", Cap Screw; (A) 5/8" X 3", Cap Screw; (B) 5/8" X 3", Cap Screw; 5/8" X 3", No. 1 And 2 Grab Rolls, Cap Screw; 5/8" X 3" (Use With Ar81954), Cap Screw; 5/8" X 3" 5/8" X 3", Cap Screw; 5/8" X 3" (Sub For 19h1756), Cap Screw; 5/8" X 3" (Sub For 19h1890), Cap Screw; 15.875 X 76.200 mm (5/8" X 3"), Cap Screw; 5/8" X 3", (21 Used Lift Assist), Cap Screw; 5/8" X 3", Use Without Mechanical Latch, Cap Screw; 5/8"X3", (Sub For 19h1847), Cap Screw; (B) 5/8"X3", Cap Screw; 5/8" X 3", (Level Land), Cap Screw; 5/8" X 3", (Use With N134733), Cap Screw; 5/8" X 3", Cap Screw; 5/8"X2-3/4", Cap Screw; (A) (B) 5/8" X 3", Cap Screw; 5/8"X3", A=26,5mm, Cap Screw; 5/8x3", Cap Screw; 5/8" X 3" 5/8", Cap Screw; 5/8" X 3" (Use With 14h1039), Cap Screw; 5/8"X3", Cap Screw; 5/8" X 3" (Use With 12h294 And 14h1039), Cap Screw; 5/8"X3, Cap Screw; 5/8" X 3", Use With Electric Marker Control, Cap Screw; (C: Part Of Ar109180 Adjustable Front Axle) 5/8" X 3", Cap Screw; 5/8"X3" (Sub For 19h1847)	1

See all parts with full part numbers in Heavy Parts AI →

Rolling Coulters 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Plain; 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Rippled; 455 Mm And 510 Mm (18" And 20") Notched Anti-Friction Bearing (Bracket, Clamp, And Shank) [C17]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Rolling Coulters 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Plain; 430 Mm, 455 Mm, And 510 Mm (17", 18", And 20") Rippled; 455 Mm And 510 Mm (18" And 20") Notched Anti-Friction Bearing (Bracket, Clamp, And Shank) [C17]

03***03	Bolt, Bolt; 5/8" X 2" Cb5nc0.62x02.00, Bolt; 5/8" X 2", Bolt; Rd. Hd. 5/8" X 2", Bolt; 0,625" X 2,0", Bolt; 5/8" X 2", (Use With N184323), Bolt; 5/8" X 2", (2510, 3010, 3020, 4010 And 4020 Tractors)	1
03***56	Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors)	1
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
12***93	U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16"	1

See all parts with full part numbers in Heavy Parts AI →

Rolling Coulters 430 Mm, 455 Mm, And 510 Mm (17-, 18-, And 20-Inch) Plain 430 Mm, 455 Mm, And 510 Mm (17-, 18-, And 20-Inch) Rippled Cone Bearing (Bearing, Clamp And Round Shank) [C09]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Rolling Coulters 430 Mm, 455 Mm, And 510 Mm (17-, 18-, And 20-Inch) Plain 430 Mm, 455 Mm, And 510 Mm (17-, 18-, And 20-Inch) Rippled Cone Bearing (Bearing, Clamp And Round Shank) [C09]

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	3
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	1
16***70	Rivet; 3/8" X 1-3/4"	6
19***27	Cap Screw; 7/16" X 2-1/2", (32 Used, 6'; 40 Used, 8'), Cap Screw; 7/16"X2-1/2", Cap Screw; 7/16" X 2-1/2" (Dual With Quad Installed) (Less Rockshaft), Cap Screw; 7/16" X 2-1/2", Cap Screw; 7/16" X 2-1/2" (Belt Drive Reel), Cap Screw, Cap Screw; (Use With 24m7180), Cap Screw; 7/16"X2-1/2"Unc, Cap Screw; 7/16" X 2-1/2" (Dual With Quad Installed) (Rockshaft), Cap Screw; (B) 7/16" X 2-1/2", Cap Screw; (Use With 12h293 And 14h813)	1

See all parts with full part numbers in Heavy Parts AI →

Root Cutter ( -1973) [C05]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Root Cutter ( -1973) [C05]

10***15	Bolt; 1/2" X 3-1/4"	2
14***09	Nut; 1/2" (2 Used, Non-Adj Airfoil;4 Used, Adj), Nut; 1/2", Nut; 1/2" (Nla), Nut; 1/2", (Into Header With Keyed Hub), Nut; X 3/8", Nut; X X 1/2", Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Nut; 1/2" (Non-Adj Airfoil), Nut, Nut; 1/2" Quantity (2) Into Header With Keyed Hub, Nut; 1/2" Nla, Nut; 1/2", (Use With Aa58404), Nut; (B: For Msl) 1/2", Nut; 1/2", (Sub For Mg280431), Nut; (B: For 390 Offset Mower) 1/2" 305mm (12''), Nut; 1/2" (A), Nut; 3/8", Nut; X 1/2", Nut; 1/2" :, Nut; 1/2", Ar, Nut; 1/2", Rh, Nut; (A) 1/2", Nut; 1/2" (154"), Nut; 12.700 mm, (Sub For Ffsb109315), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Nut; (D) 1/2", (Sub For Mg280431), Nut; 1/2" (Use With H109640), Nut; X 1/2", Nut; (B) (C) M12,7, Nut; 1/2", (Nla), Nut; 1/2" (Adj Chaffers), Nut; 1/2" (Into Header With Keyed Hub), Nut; (B) 1/2" W/O 11, Nut, Nut; 1/2" Lh Strap, Nut; 1/2" (4-Used, Adj; 2-Used, Non-Adj Airfoil), Nut; (A) (B) 1/2", Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Nut; 1/2", (154"), Nut; 5/8", Nut; 0,5", Nut; 1/2", (540rpm), Nut; 1/2", (Ty2036) (Sub 14h1040), Nut; 1/2", Use 12 For 1850mm; 18 For 2150mm, Nut; (B: For Msl) (C: For Nsl) 1/2", Nut; Rh, 1/2", Nut; 12.700 mm, Nut; 1/2" (Sub For Pt19060), Nut; 12.700 mm (1/2"), Nut; 1/2" (2 Used, Non-Adj Airfoil; 4 Used, Adj), Nut; 1/2" (Sub 14h1040), Nut; 1/2", (Sub 14h1040), Nut; (B) (C) 0,5", Nut; (C) 1/2", Nut; 1/2", (Sub For Ffsb109315), Nut; X 1/2", Nut; (Sub For Pt19060), Nut; (B) 0,5", Nut; (A: Mg803115 Light Kit) 1/2", Nut; (B) 1/2", Nut; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/2", Nut; 1/2", (Sub R66288, R66289, (4) 03h1598, (4) 03h1731, (8) 12h301 And (8) 14h1040), Nut; (B) M12,7, Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2", Nut; 1/2	2
CT***6A	Root Cutter	1

See all parts with full part numbers in Heavy Parts AI →

Safety-Trip Standard 1450 And 2450 [B11]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Safety-Trip Standard 1450 And 2450 [B11]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	2
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	3
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2

See all parts with full part numbers in Heavy Parts AI →

Shear-Bolt Standard 1350 And 2350 [C07]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Shear-Bolt Standard 1350 And 2350 [C07]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	2
12***03	Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70*00) 9550sh (-7000)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 7057-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-0087; 4250-0113; 4450-0214) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-0146; 4850-0032) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-0095; 4450-01*85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)	1
12***04	Part Missing In Wise; 3/8", Outer, Part Missing In Wise; (A: Not Required) 3/8", Part Missing In Wise; (E) 3/8", Part Missing In Wise; 3/8" (B) (C), Part Missing In Wise; 3/8" (Not Longer Required), Part Missing In Wise; (C: (-Xxxxxx) 4050-00*92; 4250-0153; 4450-0281) 3/8" (Sub For R53668), Part Missing In Wise; 3/8", (Use With 19h3219) (Not Required With E55662), Part Missing In Wise; 3/8" (4050), Part Missing In Wise; 3/8", (Sub For Mg80679), Part Missing In Wise; 3/8", (Code 3904), Part Missing In Wise; 3/8" (B), Part Missing In Wise; (A: 5103e/5104/5204/5038d(0001-), 5103/5103s(0091-), 5203(0082-).) 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With H108673), Part Missing In Wise; 3/8" (Saran Cd), Part Missing In Wise; 3/8", (Rs, Ut, Or), Part Missing In Wise; (B) (C) 3/8", Part Missing In Wise; 3/8", (Delco Remy), Part Missing In Wise; (B: Hi-Crop) 3/8", Part Missing In Wise; 3/8", (Not Used With E55662), Part Missing In Wise; (B: W/O Sound-Gard Body) 3/8", Part Missing In Wise; 3/8" (Use With R59409), Part Missing In Wise; 3/8", (Code 1601 And 1610), Part Missing In Wise; 3/8" (Pulley To Fan Spacer) Code 2314 (Af Only), Part Missing In Wise; (A) Roosa Master Dp,3/8", Part Missing In Wise; 3/8" (Sub For Ar52325), Part Missing In Wise; (A: From Sr.No.5103e/5103/5103s/5203-1272, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; (C: Not Required) 3/8", Part Missing In Wise; 3/8" (913, 915, 918 And 924), Part Missing In Wise; 3/8", (Ru And Or), Part Missing In Wise; 3/8", (Rs), Part Missing In Wise; (B: (Xxxxxx-) 4555-0100; 4755-0101; 4955-0149) 3/8", Part Missing In Wise; 3/8" (Radiator Brace Strut), Part Missing In Wise; X X (A) 3/8", Lock Washer; 3/8", Part Missing In Wise; (A) 3/8", (Use With R59409), Part Missing In Wise; 3/8", (Code 3102) (Not Req. W/E55662), Part Missing In Wise; 3/8", (Sub For Mg80680 And Mg80702), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8", (No Longer Required With 19h1936), Part Missing In Wise; 3/8", (Not Required With E55661), Part Missing In Wise; 3/8" (Without Dial-A-Matic), Part Missing In Wise; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Part Missing In Wise; 3/8", (Ru), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0018; 8650-0097) 3/8", Part Missing In Wise; 3/8" Rh, Part Missing In Wise; 3/8" (Use With R53382), Part Missing In Wise; 9.525 mm (3/8") (854a, -6150; 1253a, -6100), Part Missing In Wise; 3/8", (Not Req. W/E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With 14h812), Part Missing In Wise; 3/8", (Not Required W/E55662), Part Missing In Wise; (B: (Xxxxxx-) Serial No. 8450-0019; 8650-0098) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) 3004 And 3005, Part Missing In Wise; 3/8", (Code 4102), Part Missing In Wise; 3/8" (Use With 19h3267), Part Missing In Wise; 3/8", 6216, Part Missing In Wise; 3/8", (Not Required W/ E55662), Part Missing In Wise; (A: (-Xxxxxx) 4250-0071; 4450-0105) 3/8", Part Missing In Wise; (No Longer Required With R41041), Part Missing In Wise; 3/8", (Standard Models), Lock Washer; 3/8", (Use With 19h2284) (Use With 19h2284), Part Missing In Wise; 3/8" Hi-Crop, Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0048; 8650-0090) 3/8", Part Missing In Wise; 3/8" W/Rg, Part Missing In Wise; 3/8" (Sub For Mg80680), Part Missing In Wise; (B: (-Xxxxxx) 4650-0055; 4850-0027) 3/8", Part Missing In Wise; 3/8", 730 Tractor, Part Missing In Wise; 3/8", For 12' Harrow, Part Missing In Wise; 3/8" (Less Power Take-Off), Part Missing In Wise; 3/8", (Use With R191204), Part Missing In Wise; 3/8" 3/8" X 3/4", Part Missing In Wise; (A) 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Nlr For E55662), Part Missing In Wise; 3/8", (Not Used On 570), Part Missing In Wise; 3/8", (22 Used, Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", For 3179dl016, Part Missing In Wise; 3/4", Part Missing In Wise; (Use With 14h1076), Part Missing In Wise; 3/8", (Diesel), Part Missing In Wise; 3/8", (No Longer Required With 19h3483), Part Missing In Wise; 3/8", Roll Top, Part Missing In Wise; (B: 2 Used Dual, 3 Used Triple) 3/8", Part Missing In Wise; 3/8", (Use With Ar87023 Or Ar87024), Part Missing In Wise; 3/8", Code 2311 (Af, Af001) (Pulley To Fan Spacer), Part Missing In Wise; (A: Less Rockshaft) 3/8", Part Missing In Wise; (C: (-Xxxxxx) 4050-0092; 4250-0153; 4450-0281) 3/8", Part Missing In Wise; 3/8", (Manual), Part Missing In Wise; 3/8" 3/8" Ar, Part Missing In Wise; 3/8", (Orchard Fenders), Part Missing In Wise; (A: Less Power Take-Off) 3/8", Part Missing In Wise; 3/8", Use With Furrower, Part Missing In Wise; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8", Part Missing In Wise; (A) (B) (C) 3/8", Part Missing In Wise; 3/8", Code 2311(Tf), Part Missing In Wise; (A) (C) (E) 3/8", Part Missing In Wise; (C: Use With Ar55639, Ar62267, Ar77254, Re13722, Re41875, Ty6701, Ty6710 And Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", (Use With R90994), Part Missing In Wise; 3/8", (Sub For T11088), Part Missing In Wise; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", (Not Req. W/ E55662), Part Missing In Wise; 3/8" (Use With R55396), Part Missing In Wise; 3/8", (3 Used 4640 (B)) (2 Used 4840), Part Missing In Wise; 3/8" (With Dial-A-Matic), Part Missing In Wise; 3/8, Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf), Part Missing In Wise; 3/8", (2 On Level Land;1 On Sidehill), Part Missing In Wise; 3/8" (Use With 19h2284), Part Missing In Wise; 3/8" (Not Shown), Part Missing In Wise; 3/8" (For Ar68802), Part Missing In Wise; (C) 3/8", (Not Required With E55662), Part Missing In Wise; 9.525 mm, (Saran Cd), Part Missing In Wise; 3/8" Na, Part Missing In Wise; 3/8", (Used With Gresen Valve), Part Missing In Wise; 3/8" (920, 922, 925 And 930), Part Missing In Wise; 3/8", For 3.0 M (10') Size, Part Missing In Wise; 3/8", (Not Required With E55662) (3011, 3016), Part Missing In Wise; 3/8", (Use With Re30427), Part Missing In Wise; 3/8", For 8-Tooth Section, Part Missing In Wise; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Part Missing In Wise; 3/8", (5 Used Syncro-Range) (6 Used Power Shift), Part Missing In Wise; (B: Less Rockshaft) 3/8", Part Missing In Wise; 3/8", (Use With T25701), Part Missing In Wise; 3/8", (4 Used Dual Selective Control), Part Missing In Wise; 3/8" (Rigid), Part Missing In Wise; 3/8", (Use With 24m7096), Part Missing In Wise; (A: (-Xxxxxx) 4650-0065; 4850-0001 (Pst)) 3/8", Part Missing In Wise; 3/8" (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Alternator To Dash), Part Missing In Wise; (Nlr With R41041), Part Missing In Wise; 3/8", (Hb-G, Gh-01), Part Missing In Wise; 3/8", (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Use With R82180 Or R100676) Code 2501 And 2503, Part Missing In Wise; 3/8", (Rc And St), Part Missing In Wise; 3/8", (Use With 19h2284), Part Missing In Wise; 3/8" (132", -6874; 154", -6809), Part Missing In Wise; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Part Missing In Wise; 3/8", (Or), Part Missing In Wise; 3/8", (Use With 19h3219), Part Missing In Wise; 9.525 mm (3/8"), Part Missing In Wise; 3/8", (Rs, Ru, Rus, Ut, Or), Part Missing In Wise; 3/8" (Use With At24256 Or At31394), Part Missing In Wise; 3/8" (No Longer Required), Part Missing In Wise; 3/8", For 915, Part Missing In Wise; 3/8" (For 19h2676, 19h1648), Part Missing In Wise; 3/8", (Adjustable Rear Axle), Part Missing In Wise; 3/8" (918 Rigid), Part Missing In Wise; (C: 42" Tire) 3/8", Part Missing In Wise; 3/8", (Use With R82180 Or R100676), Part Missing In Wise; 3/8", (Use With H108673), Part Missing In Wise; 3/8", (Not Req. With E55662), Part Missing In Wise; 3/8", (2 Used Single Selective Control) (4 Used Dual Selective Control), Part Missing In Wise; (Sub For R53668), Part Missing In Wise; 3/8", For 3.7 M (12') Size, Part Missing In Wise; 3/8" (For R57059), Part Missing In Wise; 3/8" (Nlr), Part Missing In Wise; (A: (-Xxxxxx)4755-0103;4955-0124) 3/8", Part Missing In Wise; 3/8" (Sgb), Part Missing In Wise; 3/8", (120 Used L.H.) (120 Used R.H.), Part Missing In Wise; 3/8" (Less Rockshaft), Part Missing In Wise; 3/8", (Use With H149504), Part Missing In Wise; 3/8", 2350, Part Missing In Wise; 3/8", (Code 2819), Part Missing In Wise; 3/8", (Cable), Part Missing In Wise; (A: Code 2501) (B: Code 2502) 3/8", Part Missing In Wise; 3/8", (Cab), Part Missing In Wise; 3/8" 918 (6501-) 75 Used, Part Missing In Wise; 3/8", (1 Used L.H.) (1 Used R.H.), Part Missing In Wise; (Lu) (Orchard Fenders), Part Missing In Wise; 3/8", (Dn-02), Part Missing In Wise; 3/8" (Sub For (2) Mg80680), Part Missing In Wise; 3/8" (Use With R53396), Part Missing In Wise; 3/8", (Not Req. W/E55662), Part Missing In Wise; Ar, 3/8", Part Missing In Wise; 3/8", (Code 2111 And 3904), Part Missing In Wise; 3/8", (Use With Am124305 Front Frame), Part Missing In Wise; 3/8" (Code 4101), Part Missing In Wise; 3/8" (Level Land), Part Missing In Wise; 3/8" 3/8", Part Missing In Wise; (A: Mexico) (B: Turkey) 3/8", Part Missing In Wise, Part Missing In Wise; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8" (No Longer Required With R41041), Part Missing In Wise; 3/8", (Sub For T12634), Part Missing In Wise; 3/8", (Lp-Gas), Part Missing In Wise; 3/8", Used With Steel Moldboard, Part Missing In Wise; 3/8" Nla, Part Missing In Wise; 3/8", For 600 And 610, Part Missing In Wise; (B: Engine Serial No.) 3/8", Part Missing In Wise; (B: Radar Bracket To Transmission Sump Line Shield Bracket Screw) 3/8", Part Missing In Wise; 3/8", (A), Part Missing In Wise; (A) 3/8", Mechanical Front Wheel Drive, Part Missing In Wise; 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Part Missing In Wise; 3/8", Ar, Part Missing In Wise; (B: (Xxxxxx-) Esn 4650-3215; 4850-3246) 3/8", Part Missing In Wise; (A: From Sr.No. 5038d(0062-)) 3/8", Part Missing In Wise; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Part Missing In Wise; (A: From Sr.No.5103s/5203-1272, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Part Missing In Wise; 3/8" (Sgb) Nlr, Part Missing In Wise; (A: Power Shift Transmission) 3/8", Part Missing In Wise; 3/8", (Sub K40003, This Application Only), Part Missing In Wise; (A: W/O Sound-Gard Body) 3/8", Part Missing In Wise; (K) 3/8", Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8" (Flexible), Part Missing In Wise; (B: (Xxxxxx-) 4560-0021; 4760-0079; 4960-0006) 3/8", Part Missing In Wise; 3/8", (Sub For R53668), Part Missing In Wise; (A) (B) 3/8", Part Missing In Wise; 3/8", Internal Tooth, Part Missing In Wise; 3/8", (Ea-G, Ge-01), Part Missing In Wise; 3/8" (Use With Delco-Remy), Part Missing In Wise; 3/8", Code 2314 (Af Only), Part Missing In Wise; 3/8" (4 Used, Rh; 5 Used, Lh), Part Missing In Wise; (A: Use With Ar87205) 3/8", Part Missing In Wise; 3/8", (Use With 14h1076 And 19h3239), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0013; 8650-0023) 3/8", Part Missing In Wise; 3/8", For Spike-Tooth Sections, Part Missing In Wise; 3/8" (W/O Sgb), Part Missing In Wise; 3/8", (Use With 19h3239), Part Missing In Wise; (C: 3 Used Triple, 4 Used Quad) 3/8", Part Missing In Wise; 3/8" (Use With Re61087), Lock Washer; 3/8", (Use With R125195), Part Missing In Wise; X, Part Missing In Wise; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Part Missing In Wise; 3/8", (Use With Re33058), Part Missing In Wise; 3/8", (Nlr), Part Missing In Wise; (A: For Steel Moldboard) 3/8", Part Missing In Wise; (A: W/O Sgb) 3/8", Part Missing In Wise; 3/8", (Less Power Steering), Part Missing In Wise; 3/8", (Use With R59409 Or R81072), Part Missing In Wise; 3/8", For 4.6 M (15') Size, Part Missing In Wise; 3/8" (Sub T56055), Part Missing In Wise; (A: For Switzerland Only) 3/8", Part Missing In Wise; 3/8", (Mower Bar Only), Part Missing In Wise; (A) (B) (C) (D) 3/8", Part Missing In Wise; (Orchard Fenders), Part Missing In Wise; (A: (-Xxxxxx) 4650-0177; 4850-0115) 3/8", Lock Washer; 9.525 mm (3/8"), Part Missing In Wise; 3/8", 1350, Part Missing In Wise; 3/8", (Use With 19h2104 And 19h2855), Part Missing In Wise; 3/8", (Code 3903), Part Missing In Wise; 3/8", For 400, Part Missing In Wise; 3/8" To Secure Battery Cables To Frame, Part Missing In Wise; 3/8", For 15'3" Harrow, Part Missing In Wise; 3/8" (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; 3/8" (A), Part Missing In Wise; 3/8" (Use With 19h3239), Part Missing In Wise; 3/8", Terminal, Part Missing In Wise; 3/8" (Not Required W/E55662), Part Missing In Wise; 3/8", For 3179dl001, Part Missing In Wise; (A) 3/8", Part Missing In Wise; 3/8" (Use With H149504), Part Missing In Wise; 3/8" (Sub For R53668), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8", Part Missing In Wise; (A: (-Xxxxxx) Esn 4650-3214; 4850-3245) 3/8", Part Missing In Wise; 3/8", (750), Lock Washer; 3/8", (Sub For Ffsb107931), Part Missing In Wise; 3/8", (Use With R81911) Code 2501 And 2503, Part Missing In Wise; 3/8" (34 Harvester), Part Missing In Wise; (A: Contained In Ar94567) 3/8", Part Missing In Wise; (A: 5045d(0075-), 5055d(0019-), 5045e(0074-), 5055e(0075-), 5065e(0002-), 5075e(0021-)) 3/8", Part Missing In Wise; 3/8", For 810, Part Missing In Wise; (F: Used With Steel Moldboard) 3/8", Part Missing In Wise; 3/8", (13 Used, Rc And St) (11 Used, Ru And Or), Part Missing In Wise; 3/8", For 10' Harrow, Part Missing In Wise; (Use With 19h2284), Part Missing In Wise; 3/8", (St), Part Missing In Wise; 3/8", (Use With Ar77343), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" (Nlr), Part Missing In Wise; 3/8" (For 19h3267), Part Missing In Wise; (A) 3/8", (No Longer Available), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8", Used With Fiber Glass Seed Hopper, Part Missing In Wise; 9.525 mm (3/8") (Use With 19h1936), Part Missing In Wise; 3/8", (Rc, Ru, Rus), Part Missing In Wise; 3/8", (Not Required With 19h1936), Part Missing In Wise; 3/8", (2 Used, Variable Drive; 4 Used, Long), Part Missing In Wise; 3/8", (Code 6205), Part Missing In Wise; (A: (-Xxxxxx)4560-0027;4760-0050;4960-0054) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) (Use With 19h3219), Part Missing In Wise; 3/8", (Use With R125586), Part Missing In Wise; 3/8" (Pst), Part Missing In Wise; 3/8", Used On Beet Planter, Part Missing In Wise; (B: 24 And 224 Balers) 3/8", Part Missing In Wise; (E) 9.525 mm (3/8"), Part Missing In Wise; 3/8" (A), (B), Lock Washer; 3/8", (Use With 19h3239), Part Missing In Wise; 3/8", (Sub R44302), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Part Missing In Wise; 3/8", (Not Longer Required), Part Missing In Wise; (No Longer Required), Part Missing In Wise; 3/8", (Use With 24h1303), Part Missing In Wise; 3/8" Lh, Part Missing In Wise; 3/8", (Use With R59409), Part Missing In Wise; 9.525 mm, Part Missing In Wise; 3/8", (Sub K40003, This Application), Part Missing In Wise; 3/8", (2 Used Single) (4 Used Dual), Part Missing In Wise; 3/8" Battery Terminal (1 Used Single Battery) (2 Used Dual Battery) (Use With Ar66424), Part Missing In Wise; 3/8", (Use With A24646 Or A24647 And A24651), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" (Nlr), Part Missing In Wise; 3/8" (Not Req. With E55662), Part Missing In Wise; 3/8", (Mower Bar), Part Missing In Wise; 3/8", (Cornhead Attachment), Part Missing In Wise; 3/8", (Ru, Rc), Part Missing In Wise; (Sub F16202), Part Missing In Wise; 3/8", 28-Inch Rows, Part Missing In Wise; (A: Engine Serial No.) 3/8", Part Missing In Wise; (C), Part Missing In Wise; 3/8", (Code 1701, 1702 And 1703), Part Missing In Wise; 3/8", Code 3905, Part Missing In Wise; 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Use With Ar11116), Part Missing In Wise; 3/8" (Rg), Part Missing In Wise; 3/8" (8 Used Dual) (12 Used Triple), Part Missing In Wise; 3/8", (No Longer Required With R41041), Part Missing In Wise; (B) 3/8", Part Missing In Wise; 3/8" (Qrt), Part Missing In Wise; 3/8", (Use With R114130, 14h812 And 19h3219), Part Missing In Wise; 3/8" (Not Required), Part Missing In Wise; 3/8", (Code 2108), Part Missing In Wise; 3/8" (D), Part Missing In Wise; 3/8" (No Longer Required, This Application), Part Missing In Wise; 3/8", (Motorola), Part Missing In Wise; 3/8" (Nla), Part Missing In Wise; 5/16", Part Missing In Wise; 3/8", (No Longer Required), Part Missing In Wise; 3/8", (Code 2101, 2102, Or 2109), Part Missing In Wise; 3/8" (Fan To R100682, R100676, R90561 Or R82180) Code 2314 (Af Only), Part Missing In Wise; 3/8", (Use With 14h1076), Part Missing In Wise; 3/8", (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Use With Ar55094), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8", Part Missing In Wise; (A: From Sr. No. 5103s-0091, 5203-0082, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; (B) 3/8", (Sub For R1870r), Part Missing In Wise; (C: Carbon Brush Conductor) 3/8", Part Missing In Wise; 3/8", For Gauge Shoe, Part Missing In Wise; 3/8", For R128566, R131753, Part Missing In Wise; 3/8", (Ea-D, Ea-G, Ha-G, De-01, Ge-01), Part Missing In Wise; (C: 5303 (-0007), 5403 (-0042).) 3/8", Part Missing In Wise; 3/8", (Use With 19h2676), Part Missing In Wise; 3/8", Fertilizer Opener, Part Missing In Wise; No 10, Part Missing In Wise; (A: From Sr.No. 5103s(0167-), 5104(0162-), 5204(00*15-)) 3/8", Part Missing In Wise; (A) (C) 3/8", Part Missing In Wise; X X X 3/8", Part Missing In Wise; 3/8", (Delco-Remy), Part Missing In Wise; (Code 1709), Part Missing In Wise; 3/8", (Use With Ar87024 Or Ar87023), Part Missing In Wise; 3/8", 4020 Or 4010 Tractor, Part Missing In Wise; (A) (B) 9.525 mm (3/8"), Part Missing In Wise; 3/8", (To Clip), Part Missing In Wise; 3/8", 2 Or 4 Used, Part Missing In Wise; 3/8", (Used With Victor Valve), Part Missing In Wise; 3/8", (Row-Crop), Part Missing In Wise; 3/8", (Use With Re19265), Part Missing In Wise; 3/8", For B27852 Only, Part Missing In Wise; 3/8" Low, Part Missing In Wise; 3/8" (A) (B), Part Missing In Wise; 3/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Part Missing In Wise; 3/8", (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; (A), Part Missing In Wise; 3/8", (Code 7001, 7002, 7003, And 7004), Part Missing In Wise; 3/8", Code 2311(Af, Af001), Part Missing In Wise; 3/8", (4 Used, Variable Drive; 6 Used, Long), Part Missing In Wise; 3/8", External Tooth, No. 10, Part Missing In Wise; 3/8" Ar, Part Missing In Wise; 3/8", (A), (D), Part Missing In Wise; (C) 3/8", Part Missing In Wise; 3/8", Part Missing In Wise; 3/8", 8650 Tractor, Part Missing In Wise; 3/8", (31 Used, 6'; 43 Used, 8'), Part Missing In Wise; 3/8", (Use With Ar36849), Part Missing In Wise; 3/8", (Regular), Part Missing In Wise; 3/8" (Use With R191204), Part Missing In Wise; (A: Assembly Listed Below Contains All Parts Identified By (A):) 3/8" (Use With R59409), Part Missing In Wise; 3/8", (No Longer Available), Part Missing In Wise; (A: Quad-Range Transmission) 3/8", Part Missing In Wise; 3/8", (Afd - No Longer Required), Part Missing In Wise; (E) 3/8", (Use With Ar66424), Part Missing In Wise; 3/8", Code 3907, Part Missing In Wise; 3/8" 3\8", Part Missing In Wise; 3/8", (Code 4101), Part Missing In Wise; 3/8" (Not Required W/E55662 Or 14h1090), Part Missing In Wise; (D) 3/8", Part Missing In Wise; 3/8" ((1) Per Spare Shear Bolt), Part Missing In Wise; 3/8" (6620 Sidehill), Part Missing In Wise; (A) 3/8", Outer, Part Missing In Wise; 3/8", 28" Rows Only, Part Missing In Wise; 3/8", For 6-Tooth Section, Part Missing In Wise; 3/8", 4010 Or 4020 Tractor, Part Missing In Wise; 3/8", (Saran Cd), Part Missing In Wise; 3/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Part Missing In Wise; 3/8", (Sub T56055), Part Missing In Wise; (A: No Longer Required) 3/8", Part Missing In Wise; 3/8", (18 Used Steel Pan) (21 Used Cast Iron Pan), Part Missing In Wise; 3/8", (6401), Part Missing In Wise; 3/8", (Not Required), Part Missing In Wise; 3/8", (Use With Ar66424 Or At25619), Part Missing In Wise; 3/8", (Not Req W/ E55662), Part Missing In Wise; (A) (B) (D) (E) 3/8", Part Missing In Wise; 3/8", (650), Part Missing In Wise; 3/8", (K1) (K2), Part Missing In Wise; 3/8" (Use With Motorola), Part Missing In Wise; 3/8", No. 20 Hitch, Part Missing In Wise; 3/8" (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Or, Rs, Rus, Ut), Part Missing In Wise; Internal-Tooth, No. 10, Part Missing In Wise; 3/8" (Use With Ae24403), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662), Part Missing In Wise; 3/8", (16 Used, 6'; 24 Used, 8'), Part Missing In Wise; 3/8", Code 2311 (Tf) (Pulley To Fan Spacer)	1

See all parts with full part numbers in Heavy Parts AI →

Single-Acting Hydraulic Cylinder ( -1971) (Marked Cessna) 50.8 Mm X 279 Mm (2" Bore X 11" Stroke) [B25]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Single-Acting Hydraulic Cylinder ( -1971) (Marked Cessna) 50.8 Mm X 279 Mm (2" Bore X 11" Stroke) [B25]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
A1***61	Pin; 3/4 X 2.375 Button Head, Pin	2
A1***99	Rod; (Sub Aa14741)	1
A1***01	Washer; (Sub Ah78775)	1

See all parts with full part numbers in Heavy Parts AI →

Single-Acting Hydraulic Cylinder ( -1971) 50.8 Mm X 279 Mm (2" Bore X 11" Stroke) (Marked I.D.I.) [B24]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Single-Acting Hydraulic Cylinder ( -1971) 50.8 Mm X 279 Mm (2" Bore X 11" Stroke) (Marked I.D.I.) [B24]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
A1***61	Pin; 3/4 X 2.375 Button Head, Pin	2
A1***01	Washer; (Sub Ah78775)	1
A1***99	Retainer, Retainer; (No Longer Available)	1

See all parts with full part numbers in Heavy Parts AI →

Slow Moving Vehicle (Smv) Emblem, Reflectors And Brackets [C04]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Slow Moving Vehicle (Smv) Emblem, Reflectors And Brackets [C04]

12***46	Lock Washer; 0.190", (Sub For 19*06 Or 1944), Lock Washer; 0.190", Lock Washer; 0.190", (Sub For R56012), Lock Washer; 0.190" Na, Lock Washer; (F) 0.190", (Use With Ar66424), Lock Washer; (Sub For Ffsb107825), Lock Washer; 0.190", (Sub For T18836), Lock Washer; (K) 0.190", Lock Washer; No 10, Lock Washer; 0.190", (Use With T23462 And T23463), Lock Washer; 0.190", (9 Used On Each Draper), Lock Washer; 0.190", (Sub For 1906 And T18836), Lock Washer; 0.190" (Use With T23460 And T23461), Lock Washer; 0.190", (Sub For 1906), Lock Washer; (C) 0.190", Lock Washer; No. 10, Lock Washer; 0.190", (Sub For 1906) No. 10, Lock Washer; (A) (B) 0.190", Lock Washer; 0.190", Marked 1156, Lock Washer; 0.190", 18 mm (.007"), Lock Washer; 0.190" (Sub For T18836), Lock Washer; 0.190" (Use With T23462 And T23463), Lock Washer; 0.190" 0.190", Lock Washer; N.10, Lock Washer; Ar, No.10, Lock Washer; 0.190", Upper, Lock Washer; 0.190", (3004 And 3005), Lock Washer; 0.190", No. 10, Lock Washer; 0.190", Connector To Field Coil Lead, Lock Washer; 4.826 mm (0.190"), Lock Washer; No.10, Lock Washer, Lock Washer; 0.190", (Sub For 18*58), Lock Washer; 4.826 mm, Lock Washer; 0.190", (Sub For H23195), Lock Washer; 0.190" (Use With T23460 And T23461 And Ar72960), Lock Washer; 0.190", (Sub R122848), Lock Washer; 0.190" (A), Lock Washer; No10, Lock Washer; 0.190", (Sub For Ffsb107825), Lock Washer; 0.190", (Use With T23460 And T23461), Lock Washer; (F) 0.190", (Use With At25619), Lock Washer; Connector To Field Coil Lead, No. 10, Lock Washer; 0.190", (Sub For Mg80684), Lock Washer; 0.190" (Use With T23460, T23461 And Ar72960), Lock Washer; 0.190", (Use With R70407, R72817, R72818), Lock Washer; 0.190" (Switch Terminal) (Use With Ar66494), Lock Washer, Lock Washer; 0.190", (Use With T23460, T23461 And T23463), Lock Washer; 0.190", (Sub For A767r), Lock Washer; (B) 0.190", Lock Washer; 0.190", Lock Washer; 0.190", (Sub For Ty4169), Lock Washer; 0.190", (Gasoline), Lock Washer; 0.190", (Sub For T11740), Lock Washer; 0.190", (Nla), Lock Washer; 0.190" (Use With Am53945), Lock Washer; 0.190", (Use With Ar11109 Or Ar11116), Lock Washer; 10, Lock Washer; (A) No.10, Lock Washer; (A) 0.190", (Sub For T11740), Lock Washer; (B) No.10, Lock Washer; 0.190", (Sub For M80684), Lock Washer; 0.190" (Use With T23460, T23461 And T23463), Lock Washer; 0.190" (Use With R70407, R72817, R72818), Lock Washer; (A) No. 10, Lock Washer; 0.190" (Use With Ar72960, T23460 And T23461), Lock Washer; (A) (B) (C) 0.190", Lock Washer; (A) 0.190", Lock Washer; Ar, No. 10, Lock Washer; 0.190", No.10, Lock Washer; 4.826 mm (0.190"), Lock Washer; 0.190" (Use With Mg279927), Lock Washer; (A) No 10, Lock Washer; 0.190" (404dh-03)	8
14***78	Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01*00; 4255-0100; 4455-0200) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-0030; 8760-0021; 8960-00*36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 10	10
14***86	Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-0100; 4255-0100; 4455-0200) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-0030; 8760-0021; 8960-0036) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-7000) 9550sh (-7000)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-7000) & 9750sts (-70*00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"	2
21***02	Screw; 1/4" X 5/8" (Use With 14h786), Screw; 1/4"X5/8", Screw; 1/4" X 5/8", Screw; 1/4" X 5/8", Use With Endwise Transport	4

See all parts with full part numbers in Heavy Parts AI →

Stand [A14]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Stand [A14]

12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	4
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	4
19***24	Cap Screw; 5/8" X 2-1/4", Use When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" R.H. Side Only, Cap Screw; 5/8" X 2-1/4", Required To Connect Unit To Parallel Arms, Cap Screw; 5/8 X 21/2-In., Cap Screw, Cap Screw; 5/8" X 2-1/4", (Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Front Axle), Cap Screw; 5/8" X 2-1/4" (2940, 3030, 3040, 3130, 3140 (37*06-)) (2950, 2955, 3050, 3350), Cap Screw; 5/8" X 2-1/4", Use With N212983 When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Use With Extension, Cap Screw; 5/8" X 2-1/4", (Sub For 19h1734) This Application Only, Cap Screw; (D) 5/8" X 2-1/4", Cap Screw; (B) 5/8" X 2-1/4", Cap Screw; 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Use With 12h294), Cap Screw; (H: Also Use On 4050e And 4250e) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Rh Side Only, Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4", (Used With Wheel Spacers), Bolt, Cap Screw; (C) (G) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Used With Sheel Spacers), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70**00)) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Wing Frame Only, Cap Screw; 5/8" X 2-1/4", Rear Position - 530, 630, 520, 50 Or 60 Tractors; Front Position - 730, 720, Or 70 Tractors., Cap Screw; 5/8" X 2-1/4", (Use When Hitch Is Lowered), Cap Screw; (C) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Planetary Final Drive), Cap Screw; 5/8" X 2-1/4" (To Front Axle Support), Cap Screw; 5/8" X 2-1/4" (Used With Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Cylinder Block), Cap Screw; 5/8" X 2-1/4" (To Cylinder Block), . Bolt, Cap Screw; 15.875 X 57.150 mm	2
19***47	Screw; 5/8" X 2-1/2", Light Bracket, Screw; 5/8"X2-1/2", Screw, Screw; X 5/8" X 2-1/2", Screw; (H: Hydraulic Fold Only.) 5/8" X 2-1/2", Screw; 5/8" X 2-1/2", (Sub For R36511), Screw; 5/8" X 2-1/2", (4 Used Inside, Rear Hinge), Screw; 5/8" X 2-1/2", (Sub For This Application 19h3244), Screw; 5/8" X 2-1/2" Code 1405, Screw; 5/8" X 2-1/2" (Use With 12h294), Screw; 5/8" X 2-1/2" (Sub For 19h1756), Screw; 5/8"X2-1/2" Unc, Screw; 5/8" X 2-1/2" Bottom Two Mounting Holes (Also Holds Front Weight), Screw; 5/8" X 2-1/2", (11 Used With Remote Cylinder Selective Control) (12 Used Less Remote Cylinder Selective Control), Screw; (A) 5/8" X 2-1/2", Screw; 5/8" X 2-1/2" (Use With 14h1039 And 12h294), Screw; 5/8" X 2-1/2", Screw; 5/8" X 2-1/2", (Also Order R49098) (Sub For R27818), Screw; Sprocket Adapter Flange To Rear Axle Shaft, Screw; 5/8"X2-1/2" (Sub For 19h1863), Screw; 5/8" X 2-1/2" (6359tr), Screw; 5/8"X2-1/2",13.6-36, Screw; Code 1421, Screw; (A) 5/8"X2-1/2", Screw; 5/8" X 2-1/2", (Sub For 19h3244, This Application), Screw; 5/8" X 2-1/2", R.H.	2

See all parts with full part numbers in Heavy Parts AI →

Steering Arm And Pivot ( -1975) 1350 And 1450 Plows [B07]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Steering Arm And Pivot ( -1975) 1350 And 1450 Plows [B07]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	3
14***93	Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)	1
14***94	Nut; 3/4" 56” Construction Bucket, Nut; 3/4", For 4-Row, Nut; 3/4", North America, Nut; 3/4", 2 Or 4 Used, Nut; 3/4", (Not Requried With Metric Shafts), Nut; (A) 3/4", (Rs, Ut), Nut; (E: ( -Xxxxxx) Serial No. 8450-00*26; 8650-0031) 3/4", Nut; (D) (E) 3/4", Nut; 3/4", (Ru, Rus), Nut; (C) 3/4", Nut; 3/4", Nut; (A) 3/4", Nut; (B) (C) 3/4", Nut; 3/4", (For 25 mm (1") Sq. Standard), Nut; 3/4", For 6-Row, Nut; 3/4" 56” Dirt Bucket, Nut; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4", Nut; 3/8"X3/4", Nut; 3/4", 4010 Or 4020 Tractor, Nut; 3/4", (Sub E54521 And T33089) Hex Nut, Nut; 3/4" Lh, Nut; 3/4"Unc, Nut; (B) 3/4", (Rc), Nut; 3/4", For Bfa Or Bfa Spring-Tooth, Nut; 3/4", (Not Required With Metric Shafts), Nut; 3/4", For Use With 88 mm (3-1/2") Mole Ball, Nut; 3/4", Use Only With Ap31176 Main Frame, Nut; 19.050 mm, L.H., Nut; 3/4" L.H., Nut; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4", Nut; 3/4, Nut; 3/4" (Lh Only), Nut; (B) 3/4", Nut; 3/4", (50, 60, 70 Tractors), Nut; 3/4", 8 To 16 Used, Nut; 3/4", (Use With B32586), Nut; (D) 3/4", Nut; 3/4", Use H149361 Nut With Metric Shafts, Nut; (C: ( -Xxxxxx) 4650-0192; 4850-01*52) 3/4", Nut; 3/4", (Sub For R27646), Nut, Nut; 3/4", (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243)	2
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2

See all parts with full part numbers in Heavy Parts AI →

Steering Arm And Pivot (1975- ) 1350 And 1450 [B08]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Steering Arm And Pivot (1975- ) 1350 And 1450 [B08]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	4
14***93	Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)	1
14***94	Nut; 3/4" 56” Construction Bucket, Nut; 3/4", For 4-Row, Nut; 3/4", North America, Nut; 3/4", 2 Or 4 Used, Nut; 3/4", (Not Requried With Metric Shafts), Nut; (A) 3/4", (Rs, Ut), Nut; (E: ( -Xxxxxx) Serial No. 8450-00*26; 8650-0031) 3/4", Nut; (D) (E) 3/4", Nut; 3/4", (Ru, Rus), Nut; (C) 3/4", Nut; 3/4", Nut; (A) 3/4", Nut; (B) (C) 3/4", Nut; 3/4", (For 25 mm (1") Sq. Standard), Nut; 3/4", For 6-Row, Nut; 3/4" 56” Dirt Bucket, Nut; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4", Nut; 3/8"X3/4", Nut; 3/4", 4010 Or 4020 Tractor, Nut; 3/4", (Sub E54521 And T33089) Hex Nut, Nut; 3/4" Lh, Nut; 3/4"Unc, Nut; (B) 3/4", (Rc), Nut; 3/4", For Bfa Or Bfa Spring-Tooth, Nut; 3/4", (Not Required With Metric Shafts), Nut; 3/4", For Use With 88 mm (3-1/2") Mole Ball, Nut; 3/4", Use Only With Ap31176 Main Frame, Nut; 19.050 mm, L.H., Nut; 3/4" L.H., Nut; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4", Nut; 3/4, Nut; 3/4" (Lh Only), Nut; (B) 3/4", Nut; 3/4", (50, 60, 70 Tractors), Nut; 3/4", 8 To 16 Used, Nut; 3/4", (Use With B32586), Nut; (D) 3/4", Nut; 3/4", Use H149361 Nut With Metric Shafts, Nut; (C: ( -Xxxxxx) 4650-0192; 4850-01*52) 3/4", Nut; 3/4", (Sub For R27646), Nut, Nut; 3/4", (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243)	3
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2

See all parts with full part numbers in Heavy Parts AI →

Steering Arm And Pivot (1977- ) 2350 And 2450 [B10]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Steering Arm And Pivot (1977- ) 2350 And 2450 [B10]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	4
14***94	Nut; 3/4" 56” Construction Bucket, Nut; 3/4", For 4-Row, Nut; 3/4", North America, Nut; 3/4", 2 Or 4 Used, Nut; 3/4", (Not Requried With Metric Shafts), Nut; (A) 3/4", (Rs, Ut), Nut; (E: ( -Xxxxxx) Serial No. 8450-00*26; 8650-0031) 3/4", Nut; (D) (E) 3/4", Nut; 3/4", (Ru, Rus), Nut; (C) 3/4", Nut; 3/4", Nut; (A) 3/4", Nut; (B) (C) 3/4", Nut; 3/4", (For 25 mm (1") Sq. Standard), Nut; 3/4", For 6-Row, Nut; 3/4" 56” Dirt Bucket, Nut; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4", Nut; 3/8"X3/4", Nut; 3/4", 4010 Or 4020 Tractor, Nut; 3/4", (Sub E54521 And T33089) Hex Nut, Nut; 3/4" Lh, Nut; 3/4"Unc, Nut; (B) 3/4", (Rc), Nut; 3/4", For Bfa Or Bfa Spring-Tooth, Nut; 3/4", (Not Required With Metric Shafts), Nut; 3/4", For Use With 88 mm (3-1/2") Mole Ball, Nut; 3/4", Use Only With Ap31176 Main Frame, Nut; 19.050 mm, L.H., Nut; 3/4" L.H., Nut; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4", Nut; 3/4, Nut; 3/4" (Lh Only), Nut; (B) 3/4", Nut; 3/4", (50, 60, 70 Tractors), Nut; 3/4", 8 To 16 Used, Nut; 3/4", (Use With B32586), Nut; (D) 3/4", Nut; 3/4", Use H149361 Nut With Metric Shafts, Nut; (C: ( -Xxxxxx) 4650-0192; 4850-01*52) 3/4", Nut; 3/4", (Sub For R27646), Nut, Nut; 3/4", (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243)	4
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2
19***07	Cap Screw; (A: Extension Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (With Drawbar Offset Down), Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; (C) 3/4" X 2-3/4", Cap Screw; Ar 3/4"X2-3/4", Cap Screw; (A) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Code 1403), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 3/4" X 2-3/4", Cap Screw; 3/4"X3", Cap Screw; 3/4" X 2-3/4", (Center), Cap Screw; (B) (C) 3/4" X 2-3/4", Cap Screw; (A) (B) 3/4" X 2-3/4", Rear Top, Cap Screw; (B) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Or), Cap Screw; 3/4" X 2-3/4", Cap Screw; 3/8"X2-3/4", Cap Screw; Ar, 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4" Rear Top, (17'-11" Through 26'-5"), Cap Screw; 3/4" X 2-3/4", (Rc, St And Ru), Cap Screw; (B: Torque Divider To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: Clutch Housing To Cylinder Block) 3/4" X 2-3/4", Cap Screw; (D) (E) 3/4" X 2-3/4", Cap Screw; 3/4"X2-3/4", Cap Screw; Ar,3/4"X2-3/4", Cap Screw; (A: Extension Housing To Torque Divider) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", Rear Top, Cap Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 3/4" X 2-3/4" (24.5-32 Or 23.1-34) Tire, Cap Screw; 3/4" X 2-3/4", (Row-Crop And Standard), Cap Screw; 3/4" X 2-3/4", For 850, Cap Screw; (A: 10, 000 Lb.) 3/4" X 2-3/4" Rigid Hitch, Cap Screw; (C) (D) (E) 3/4" X 2-3/4"	3

See all parts with full part numbers in Heavy Parts AI →

Steering Pipes, Arm, And Pivot ( -1977) 2350 And 2450 [B09]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Steering Pipes, Arm, And Pivot ( -1977) 2350 And 2450 [B09]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	6
14***94	Nut; 3/4" 56” Construction Bucket, Nut; 3/4", For 4-Row, Nut; 3/4", North America, Nut; 3/4", 2 Or 4 Used, Nut; 3/4", (Not Requried With Metric Shafts), Nut; (A) 3/4", (Rs, Ut), Nut; (E: ( -Xxxxxx) Serial No. 8450-00*26; 8650-0031) 3/4", Nut; (D) (E) 3/4", Nut; 3/4", (Ru, Rus), Nut; (C) 3/4", Nut; 3/4", Nut; (A) 3/4", Nut; (B) (C) 3/4", Nut; 3/4", (For 25 mm (1") Sq. Standard), Nut; 3/4", For 6-Row, Nut; 3/4" 56” Dirt Bucket, Nut; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4", Nut; 3/8"X3/4", Nut; 3/4", 4010 Or 4020 Tractor, Nut; 3/4", (Sub E54521 And T33089) Hex Nut, Nut; 3/4" Lh, Nut; 3/4"Unc, Nut; (B) 3/4", (Rc), Nut; 3/4", For Bfa Or Bfa Spring-Tooth, Nut; 3/4", (Not Required With Metric Shafts), Nut; 3/4", For Use With 88 mm (3-1/2") Mole Ball, Nut; 3/4", Use Only With Ap31176 Main Frame, Nut; 19.050 mm, L.H., Nut; 3/4" L.H., Nut; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4", Nut; 3/4, Nut; 3/4" (Lh Only), Nut; (B) 3/4", Nut; 3/4", (50, 60, 70 Tractors), Nut; 3/4", 8 To 16 Used, Nut; 3/4", (Use With B32586), Nut; (D) 3/4", Nut; 3/4", Use H149361 Nut With Metric Shafts, Nut; (C: ( -Xxxxxx) 4650-0192; 4850-01*52) 3/4", Nut; 3/4", (Sub For R27646), Nut, Nut; 3/4", (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243)	6
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	4
19***07	Cap Screw; (A: Extension Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (With Drawbar Offset Down), Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; (C) 3/4" X 2-3/4", Cap Screw; Ar 3/4"X2-3/4", Cap Screw; (A) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Code 1403), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 3/4" X 2-3/4", Cap Screw; 3/4"X3", Cap Screw; 3/4" X 2-3/4", (Center), Cap Screw; (B) (C) 3/4" X 2-3/4", Cap Screw; (A) (B) 3/4" X 2-3/4", Rear Top, Cap Screw; (B) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Or), Cap Screw; 3/4" X 2-3/4", Cap Screw; 3/8"X2-3/4", Cap Screw; Ar, 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4" Rear Top, (17'-11" Through 26'-5"), Cap Screw; 3/4" X 2-3/4", (Rc, St And Ru), Cap Screw; (B: Torque Divider To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: Clutch Housing To Cylinder Block) 3/4" X 2-3/4", Cap Screw; (D) (E) 3/4" X 2-3/4", Cap Screw; 3/4"X2-3/4", Cap Screw; Ar,3/4"X2-3/4", Cap Screw; (A: Extension Housing To Torque Divider) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", Rear Top, Cap Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 3/4" X 2-3/4" (24.5-32 Or 23.1-34) Tire, Cap Screw; 3/4" X 2-3/4", (Row-Crop And Standard), Cap Screw; 3/4" X 2-3/4", For 850, Cap Screw; (A: 10, 000 Lb.) 3/4" X 2-3/4" Rigid Hitch, Cap Screw; (C) (D) (E) 3/4" X 2-3/4"	3

See all parts with full part numbers in Heavy Parts AI →

Tractor Guide Rod [C08]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Tractor Guide Rod [C08]

03***99	Bolt; 5/8" X 1-3/4", 4010 And 4020 Tractor, Bolt, Bolt; 5/8" X 1-3/4", Bolt; (A) 5/8" X 1-3/4", Bolt; (B) 5/8" X 1-3/4", Bolt; (C) 5/8" X 1-3/4"	2
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	2
12***04	Part Missing In Wise; 3/8", Outer, Part Missing In Wise; (A: Not Required) 3/8", Part Missing In Wise; (E) 3/8", Part Missing In Wise; 3/8" (B) (C), Part Missing In Wise; 3/8" (Not Longer Required), Part Missing In Wise; (C: (-Xxxxxx) 4050-00*92; 4250-0153; 4450-0281) 3/8" (Sub For R53668), Part Missing In Wise; 3/8", (Use With 19h3219) (Not Required With E55662), Part Missing In Wise; 3/8" (4050), Part Missing In Wise; 3/8", (Sub For Mg80679), Part Missing In Wise; 3/8", (Code 3904), Part Missing In Wise; 3/8" (B), Part Missing In Wise; (A: 5103e/5104/5204/5038d(0001-), 5103/5103s(0091-), 5203(0082-).) 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With H108673), Part Missing In Wise; 3/8" (Saran Cd), Part Missing In Wise; 3/8", (Rs, Ut, Or), Part Missing In Wise; (B) (C) 3/8", Part Missing In Wise; 3/8", (Delco Remy), Part Missing In Wise; (B: Hi-Crop) 3/8", Part Missing In Wise; 3/8", (Not Used With E55662), Part Missing In Wise; (B: W/O Sound-Gard Body) 3/8", Part Missing In Wise; 3/8" (Use With R59409), Part Missing In Wise; 3/8", (Code 1601 And 1610), Part Missing In Wise; 3/8" (Pulley To Fan Spacer) Code 2314 (Af Only), Part Missing In Wise; (A) Roosa Master Dp,3/8", Part Missing In Wise; 3/8" (Sub For Ar52325), Part Missing In Wise; (A: From Sr.No.5103e/5103/5103s/5203-1272, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; (C: Not Required) 3/8", Part Missing In Wise; 3/8" (913, 915, 918 And 924), Part Missing In Wise; 3/8", (Ru And Or), Part Missing In Wise; 3/8", (Rs), Part Missing In Wise; (B: (Xxxxxx-) 4555-0100; 4755-0101; 4955-0149) 3/8", Part Missing In Wise; 3/8" (Radiator Brace Strut), Part Missing In Wise; X X (A) 3/8", Lock Washer; 3/8", Part Missing In Wise; (A) 3/8", (Use With R59409), Part Missing In Wise; 3/8", (Code 3102) (Not Req. W/E55662), Part Missing In Wise; 3/8", (Sub For Mg80680 And Mg80702), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8", (No Longer Required With 19h1936), Part Missing In Wise; 3/8", (Not Required With E55661), Part Missing In Wise; 3/8" (Without Dial-A-Matic), Part Missing In Wise; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Part Missing In Wise; 3/8", (Ru), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0018; 8650-0097) 3/8", Part Missing In Wise; 3/8" Rh, Part Missing In Wise; 3/8" (Use With R53382), Part Missing In Wise; 9.525 mm (3/8") (854a, -6150; 1253a, -6100), Part Missing In Wise; 3/8", (Not Req. W/E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With 14h812), Part Missing In Wise; 3/8", (Not Required W/E55662), Part Missing In Wise; (B: (Xxxxxx-) Serial No. 8450-0019; 8650-0098) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) 3004 And 3005, Part Missing In Wise; 3/8", (Code 4102), Part Missing In Wise; 3/8" (Use With 19h3267), Part Missing In Wise; 3/8", 6216, Part Missing In Wise; 3/8", (Not Required W/ E55662), Part Missing In Wise; (A: (-Xxxxxx) 4250-0071; 4450-0105) 3/8", Part Missing In Wise; (No Longer Required With R41041), Part Missing In Wise; 3/8", (Standard Models), Lock Washer; 3/8", (Use With 19h2284) (Use With 19h2284), Part Missing In Wise; 3/8" Hi-Crop, Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0048; 8650-0090) 3/8", Part Missing In Wise; 3/8" W/Rg, Part Missing In Wise; 3/8" (Sub For Mg80680), Part Missing In Wise; (B: (-Xxxxxx) 4650-0055; 4850-0027) 3/8", Part Missing In Wise; 3/8", 730 Tractor, Part Missing In Wise; 3/8", For 12' Harrow, Part Missing In Wise; 3/8" (Less Power Take-Off), Part Missing In Wise; 3/8", (Use With R191204), Part Missing In Wise; 3/8" 3/8" X 3/4", Part Missing In Wise; (A) 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Nlr For E55662), Part Missing In Wise; 3/8", (Not Used On 570), Part Missing In Wise; 3/8", (22 Used, Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", For 3179dl016, Part Missing In Wise; 3/4", Part Missing In Wise; (Use With 14h1076), Part Missing In Wise; 3/8", (Diesel), Part Missing In Wise; 3/8", (No Longer Required With 19h3483), Part Missing In Wise; 3/8", Roll Top, Part Missing In Wise; (B: 2 Used Dual, 3 Used Triple) 3/8", Part Missing In Wise; 3/8", (Use With Ar87023 Or Ar87024), Part Missing In Wise; 3/8", Code 2311 (Af, Af001) (Pulley To Fan Spacer), Part Missing In Wise; (A: Less Rockshaft) 3/8", Part Missing In Wise; (C: (-Xxxxxx) 4050-0092; 4250-0153; 4450-0281) 3/8", Part Missing In Wise; 3/8", (Manual), Part Missing In Wise; 3/8" 3/8" Ar, Part Missing In Wise; 3/8", (Orchard Fenders), Part Missing In Wise; (A: Less Power Take-Off) 3/8", Part Missing In Wise; 3/8", Use With Furrower, Part Missing In Wise; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8", Part Missing In Wise; (A) (B) (C) 3/8", Part Missing In Wise; 3/8", Code 2311(Tf), Part Missing In Wise; (A) (C) (E) 3/8", Part Missing In Wise; (C: Use With Ar55639, Ar62267, Ar77254, Re13722, Re41875, Ty6701, Ty6710 And Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", (Use With R90994), Part Missing In Wise; 3/8", (Sub For T11088), Part Missing In Wise; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", (Not Req. W/ E55662), Part Missing In Wise; 3/8" (Use With R55396), Part Missing In Wise; 3/8", (3 Used 4640 (B)) (2 Used 4840), Part Missing In Wise; 3/8" (With Dial-A-Matic), Part Missing In Wise; 3/8, Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf), Part Missing In Wise; 3/8", (2 On Level Land;1 On Sidehill), Part Missing In Wise; 3/8" (Use With 19h2284), Part Missing In Wise; 3/8" (Not Shown), Part Missing In Wise; 3/8" (For Ar68802), Part Missing In Wise; (C) 3/8", (Not Required With E55662), Part Missing In Wise; 9.525 mm, (Saran Cd), Part Missing In Wise; 3/8" Na, Part Missing In Wise; 3/8", (Used With Gresen Valve), Part Missing In Wise; 3/8" (920, 922, 925 And 930), Part Missing In Wise; 3/8", For 3.0 M (10') Size, Part Missing In Wise; 3/8", (Not Required With E55662) (3011, 3016), Part Missing In Wise; 3/8", (Use With Re30427), Part Missing In Wise; 3/8", For 8-Tooth Section, Part Missing In Wise; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Part Missing In Wise; 3/8", (5 Used Syncro-Range) (6 Used Power Shift), Part Missing In Wise; (B: Less Rockshaft) 3/8", Part Missing In Wise; 3/8", (Use With T25701), Part Missing In Wise; 3/8", (4 Used Dual Selective Control), Part Missing In Wise; 3/8" (Rigid), Part Missing In Wise; 3/8", (Use With 24m7096), Part Missing In Wise; (A: (-Xxxxxx) 4650-0065; 4850-0001 (Pst)) 3/8", Part Missing In Wise; 3/8" (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Alternator To Dash), Part Missing In Wise; (Nlr With R41041), Part Missing In Wise; 3/8", (Hb-G, Gh-01), Part Missing In Wise; 3/8", (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Use With R82180 Or R100676) Code 2501 And 2503, Part Missing In Wise; 3/8", (Rc And St), Part Missing In Wise; 3/8", (Use With 19h2284), Part Missing In Wise; 3/8" (132", -6874; 154", -6809), Part Missing In Wise; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Part Missing In Wise; 3/8", (Or), Part Missing In Wise; 3/8", (Use With 19h3219), Part Missing In Wise; 9.525 mm (3/8"), Part Missing In Wise; 3/8", (Rs, Ru, Rus, Ut, Or), Part Missing In Wise; 3/8" (Use With At24256 Or At31394), Part Missing In Wise; 3/8" (No Longer Required), Part Missing In Wise; 3/8", For 915, Part Missing In Wise; 3/8" (For 19h2676, 19h1648), Part Missing In Wise; 3/8", (Adjustable Rear Axle), Part Missing In Wise; 3/8" (918 Rigid), Part Missing In Wise; (C: 42" Tire) 3/8", Part Missing In Wise; 3/8", (Use With R82180 Or R100676), Part Missing In Wise; 3/8", (Use With H108673), Part Missing In Wise; 3/8", (Not Req. With E55662), Part Missing In Wise; 3/8", (2 Used Single Selective Control) (4 Used Dual Selective Control), Part Missing In Wise; (Sub For R53668), Part Missing In Wise; 3/8", For 3.7 M (12') Size, Part Missing In Wise; 3/8" (For R57059), Part Missing In Wise; 3/8" (Nlr), Part Missing In Wise; (A: (-Xxxxxx)4755-0103;4955-0124) 3/8", Part Missing In Wise; 3/8" (Sgb), Part Missing In Wise; 3/8", (120 Used L.H.) (120 Used R.H.), Part Missing In Wise; 3/8" (Less Rockshaft), Part Missing In Wise; 3/8", (Use With H149504), Part Missing In Wise; 3/8", 2350, Part Missing In Wise; 3/8", (Code 2819), Part Missing In Wise; 3/8", (Cable), Part Missing In Wise; (A: Code 2501) (B: Code 2502) 3/8", Part Missing In Wise; 3/8", (Cab), Part Missing In Wise; 3/8" 918 (6501-) 75 Used, Part Missing In Wise; 3/8", (1 Used L.H.) (1 Used R.H.), Part Missing In Wise; (Lu) (Orchard Fenders), Part Missing In Wise; 3/8", (Dn-02), Part Missing In Wise; 3/8" (Sub For (2) Mg80680), Part Missing In Wise; 3/8" (Use With R53396), Part Missing In Wise; 3/8", (Not Req. W/E55662), Part Missing In Wise; Ar, 3/8", Part Missing In Wise; 3/8", (Code 2111 And 3904), Part Missing In Wise; 3/8", (Use With Am124305 Front Frame), Part Missing In Wise; 3/8" (Code 4101), Part Missing In Wise; 3/8" (Level Land), Part Missing In Wise; 3/8" 3/8", Part Missing In Wise; (A: Mexico) (B: Turkey) 3/8", Part Missing In Wise, Part Missing In Wise; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8" (No Longer Required With R41041), Part Missing In Wise; 3/8", (Sub For T12634), Part Missing In Wise; 3/8", (Lp-Gas), Part Missing In Wise; 3/8", Used With Steel Moldboard, Part Missing In Wise; 3/8" Nla, Part Missing In Wise; 3/8", For 600 And 610, Part Missing In Wise; (B: Engine Serial No.) 3/8", Part Missing In Wise; (B: Radar Bracket To Transmission Sump Line Shield Bracket Screw) 3/8", Part Missing In Wise; 3/8", (A), Part Missing In Wise; (A) 3/8", Mechanical Front Wheel Drive, Part Missing In Wise; 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Part Missing In Wise; 3/8", Ar, Part Missing In Wise; (B: (Xxxxxx-) Esn 4650-3215; 4850-3246) 3/8", Part Missing In Wise; (A: From Sr.No. 5038d(0062-)) 3/8", Part Missing In Wise; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Part Missing In Wise; (A: From Sr.No.5103s/5203-1272, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Part Missing In Wise; 3/8" (Sgb) Nlr, Part Missing In Wise; (A: Power Shift Transmission) 3/8", Part Missing In Wise; 3/8", (Sub K40003, This Application Only), Part Missing In Wise; (A: W/O Sound-Gard Body) 3/8", Part Missing In Wise; (K) 3/8", Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8" (Flexible), Part Missing In Wise; (B: (Xxxxxx-) 4560-0021; 4760-0079; 4960-0006) 3/8", Part Missing In Wise; 3/8", (Sub For R53668), Part Missing In Wise; (A) (B) 3/8", Part Missing In Wise; 3/8", Internal Tooth, Part Missing In Wise; 3/8", (Ea-G, Ge-01), Part Missing In Wise; 3/8" (Use With Delco-Remy), Part Missing In Wise; 3/8", Code 2314 (Af Only), Part Missing In Wise; 3/8" (4 Used, Rh; 5 Used, Lh), Part Missing In Wise; (A: Use With Ar87205) 3/8", Part Missing In Wise; 3/8", (Use With 14h1076 And 19h3239), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0013; 8650-0023) 3/8", Part Missing In Wise; 3/8", For Spike-Tooth Sections, Part Missing In Wise; 3/8" (W/O Sgb), Part Missing In Wise; 3/8", (Use With 19h3239), Part Missing In Wise; (C: 3 Used Triple, 4 Used Quad) 3/8", Part Missing In Wise; 3/8" (Use With Re61087), Lock Washer; 3/8", (Use With R125195), Part Missing In Wise; X, Part Missing In Wise; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Part Missing In Wise; 3/8", (Use With Re33058), Part Missing In Wise; 3/8", (Nlr), Part Missing In Wise; (A: For Steel Moldboard) 3/8", Part Missing In Wise; (A: W/O Sgb) 3/8", Part Missing In Wise; 3/8", (Less Power Steering), Part Missing In Wise; 3/8", (Use With R59409 Or R81072), Part Missing In Wise; 3/8", For 4.6 M (15') Size, Part Missing In Wise; 3/8" (Sub T56055), Part Missing In Wise; (A: For Switzerland Only) 3/8", Part Missing In Wise; 3/8", (Mower Bar Only), Part Missing In Wise; (A) (B) (C) (D) 3/8", Part Missing In Wise; (Orchard Fenders), Part Missing In Wise; (A: (-Xxxxxx) 4650-0177; 4850-0115) 3/8", Lock Washer; 9.525 mm (3/8"), Part Missing In Wise; 3/8", 1350, Part Missing In Wise; 3/8", (Use With 19h2104 And 19h2855), Part Missing In Wise; 3/8", (Code 3903), Part Missing In Wise; 3/8", For 400, Part Missing In Wise; 3/8" To Secure Battery Cables To Frame, Part Missing In Wise; 3/8", For 15'3" Harrow, Part Missing In Wise; 3/8" (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; 3/8" (A), Part Missing In Wise; 3/8" (Use With 19h3239), Part Missing In Wise; 3/8", Terminal, Part Missing In Wise; 3/8" (Not Required W/E55662), Part Missing In Wise; 3/8", For 3179dl001, Part Missing In Wise; (A) 3/8", Part Missing In Wise; 3/8" (Use With H149504), Part Missing In Wise; 3/8" (Sub For R53668), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8", Part Missing In Wise; (A: (-Xxxxxx) Esn 4650-3214; 4850-3245) 3/8", Part Missing In Wise; 3/8", (750), Lock Washer; 3/8", (Sub For Ffsb107931), Part Missing In Wise; 3/8", (Use With R81911) Code 2501 And 2503, Part Missing In Wise; 3/8" (34 Harvester), Part Missing In Wise; (A: Contained In Ar94567) 3/8", Part Missing In Wise; (A: 5045d(0075-), 5055d(0019-), 5045e(0074-), 5055e(0075-), 5065e(0002-), 5075e(0021-)) 3/8", Part Missing In Wise; 3/8", For 810, Part Missing In Wise; (F: Used With Steel Moldboard) 3/8", Part Missing In Wise; 3/8", (13 Used, Rc And St) (11 Used, Ru And Or), Part Missing In Wise; 3/8", For 10' Harrow, Part Missing In Wise; (Use With 19h2284), Part Missing In Wise; 3/8", (St), Part Missing In Wise; 3/8", (Use With Ar77343), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" (Nlr), Part Missing In Wise; 3/8" (For 19h3267), Part Missing In Wise; (A) 3/8", (No Longer Available), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8", Used With Fiber Glass Seed Hopper, Part Missing In Wise; 9.525 mm (3/8") (Use With 19h1936), Part Missing In Wise; 3/8", (Rc, Ru, Rus), Part Missing In Wise; 3/8", (Not Required With 19h1936), Part Missing In Wise; 3/8", (2 Used, Variable Drive; 4 Used, Long), Part Missing In Wise; 3/8", (Code 6205), Part Missing In Wise; (A: (-Xxxxxx)4560-0027;4760-0050;4960-0054) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) (Use With 19h3219), Part Missing In Wise; 3/8", (Use With R125586), Part Missing In Wise; 3/8" (Pst), Part Missing In Wise; 3/8", Used On Beet Planter, Part Missing In Wise; (B: 24 And 224 Balers) 3/8", Part Missing In Wise; (E) 9.525 mm (3/8"), Part Missing In Wise; 3/8" (A), (B), Lock Washer; 3/8", (Use With 19h3239), Part Missing In Wise; 3/8", (Sub R44302), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Part Missing In Wise; 3/8", (Not Longer Required), Part Missing In Wise; (No Longer Required), Part Missing In Wise; 3/8", (Use With 24h1303), Part Missing In Wise; 3/8" Lh, Part Missing In Wise; 3/8", (Use With R59409), Part Missing In Wise; 9.525 mm, Part Missing In Wise; 3/8", (Sub K40003, This Application), Part Missing In Wise; 3/8", (2 Used Single) (4 Used Dual), Part Missing In Wise; 3/8" Battery Terminal (1 Used Single Battery) (2 Used Dual Battery) (Use With Ar66424), Part Missing In Wise; 3/8", (Use With A24646 Or A24647 And A24651), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" (Nlr), Part Missing In Wise; 3/8" (Not Req. With E55662), Part Missing In Wise; 3/8", (Mower Bar), Part Missing In Wise; 3/8", (Cornhead Attachment), Part Missing In Wise; 3/8", (Ru, Rc), Part Missing In Wise; (Sub F16202), Part Missing In Wise; 3/8", 28-Inch Rows, Part Missing In Wise; (A: Engine Serial No.) 3/8", Part Missing In Wise; (C), Part Missing In Wise; 3/8", (Code 1701, 1702 And 1703), Part Missing In Wise; 3/8", Code 3905, Part Missing In Wise; 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Use With Ar11116), Part Missing In Wise; 3/8" (Rg), Part Missing In Wise; 3/8" (8 Used Dual) (12 Used Triple), Part Missing In Wise; 3/8", (No Longer Required With R41041), Part Missing In Wise; (B) 3/8", Part Missing In Wise; 3/8" (Qrt), Part Missing In Wise; 3/8", (Use With R114130, 14h812 And 19h3219), Part Missing In Wise; 3/8" (Not Required), Part Missing In Wise; 3/8", (Code 2108), Part Missing In Wise; 3/8" (D), Part Missing In Wise; 3/8" (No Longer Required, This Application), Part Missing In Wise; 3/8", (Motorola), Part Missing In Wise; 3/8" (Nla), Part Missing In Wise; 5/16", Part Missing In Wise; 3/8", (No Longer Required), Part Missing In Wise; 3/8", (Code 2101, 2102, Or 2109), Part Missing In Wise; 3/8" (Fan To R100682, R100676, R90561 Or R82180) Code 2314 (Af Only), Part Missing In Wise; 3/8", (Use With 14h1076), Part Missing In Wise; 3/8", (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Use With Ar55094), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8", Part Missing In Wise; (A: From Sr. No. 5103s-0091, 5203-0082, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; (B) 3/8", (Sub For R1870r), Part Missing In Wise; (C: Carbon Brush Conductor) 3/8", Part Missing In Wise; 3/8", For Gauge Shoe, Part Missing In Wise; 3/8", For R128566, R131753, Part Missing In Wise; 3/8", (Ea-D, Ea-G, Ha-G, De-01, Ge-01), Part Missing In Wise; (C: 5303 (-0007), 5403 (-0042).) 3/8", Part Missing In Wise; 3/8", (Use With 19h2676), Part Missing In Wise; 3/8", Fertilizer Opener, Part Missing In Wise; No 10, Part Missing In Wise; (A: From Sr.No. 5103s(0167-), 5104(0162-), 5204(00*15-)) 3/8", Part Missing In Wise; (A) (C) 3/8", Part Missing In Wise; X X X 3/8", Part Missing In Wise; 3/8", (Delco-Remy), Part Missing In Wise; (Code 1709), Part Missing In Wise; 3/8", (Use With Ar87024 Or Ar87023), Part Missing In Wise; 3/8", 4020 Or 4010 Tractor, Part Missing In Wise; (A) (B) 9.525 mm (3/8"), Part Missing In Wise; 3/8", (To Clip), Part Missing In Wise; 3/8", 2 Or 4 Used, Part Missing In Wise; 3/8", (Used With Victor Valve), Part Missing In Wise; 3/8", (Row-Crop), Part Missing In Wise; 3/8", (Use With Re19265), Part Missing In Wise; 3/8", For B27852 Only, Part Missing In Wise; 3/8" Low, Part Missing In Wise; 3/8" (A) (B), Part Missing In Wise; 3/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Part Missing In Wise; 3/8", (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; (A), Part Missing In Wise; 3/8", (Code 7001, 7002, 7003, And 7004), Part Missing In Wise; 3/8", Code 2311(Af, Af001), Part Missing In Wise; 3/8", (4 Used, Variable Drive; 6 Used, Long), Part Missing In Wise; 3/8", External Tooth, No. 10, Part Missing In Wise; 3/8" Ar, Part Missing In Wise; 3/8", (A), (D), Part Missing In Wise; (C) 3/8", Part Missing In Wise; 3/8", Part Missing In Wise; 3/8", 8650 Tractor, Part Missing In Wise; 3/8", (31 Used, 6'; 43 Used, 8'), Part Missing In Wise; 3/8", (Use With Ar36849), Part Missing In Wise; 3/8", (Regular), Part Missing In Wise; 3/8" (Use With R191204), Part Missing In Wise; (A: Assembly Listed Below Contains All Parts Identified By (A):) 3/8" (Use With R59409), Part Missing In Wise; 3/8", (No Longer Available), Part Missing In Wise; (A: Quad-Range Transmission) 3/8", Part Missing In Wise; 3/8", (Afd - No Longer Required), Part Missing In Wise; (E) 3/8", (Use With Ar66424), Part Missing In Wise; 3/8", Code 3907, Part Missing In Wise; 3/8" 3\8", Part Missing In Wise; 3/8", (Code 4101), Part Missing In Wise; 3/8" (Not Required W/E55662 Or 14h1090), Part Missing In Wise; (D) 3/8", Part Missing In Wise; 3/8" ((1) Per Spare Shear Bolt), Part Missing In Wise; 3/8" (6620 Sidehill), Part Missing In Wise; (A) 3/8", Outer, Part Missing In Wise; 3/8", 28" Rows Only, Part Missing In Wise; 3/8", For 6-Tooth Section, Part Missing In Wise; 3/8", 4010 Or 4020 Tractor, Part Missing In Wise; 3/8", (Saran Cd), Part Missing In Wise; 3/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Part Missing In Wise; 3/8", (Sub T56055), Part Missing In Wise; (A: No Longer Required) 3/8", Part Missing In Wise; 3/8", (18 Used Steel Pan) (21 Used Cast Iron Pan), Part Missing In Wise; 3/8", (6401), Part Missing In Wise; 3/8", (Not Required), Part Missing In Wise; 3/8", (Use With Ar66424 Or At25619), Part Missing In Wise; 3/8", (Not Req W/ E55662), Part Missing In Wise; (A) (B) (D) (E) 3/8", Part Missing In Wise; 3/8", (650), Part Missing In Wise; 3/8", (K1) (K2), Part Missing In Wise; 3/8" (Use With Motorola), Part Missing In Wise; 3/8", No. 20 Hitch, Part Missing In Wise; 3/8" (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Or, Rs, Rus, Ut), Part Missing In Wise; Internal-Tooth, No. 10, Part Missing In Wise; 3/8" (Use With Ae24403), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662), Part Missing In Wise; 3/8", (16 Used, 6'; 24 Used, 8'), Part Missing In Wise; 3/8", Code 2311 (Tf) (Pulley To Fan Spacer)	4
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2

See all parts with full part numbers in Heavy Parts AI →

Weed Hook ( -1973) [C06]

John Deere : 2350 - Plow, Moldboard (Semi-Integral) : Weed Hook ( -1973) [C06]

1***0	Hook	1
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	2
19***06	Cap Screw; 7/16" X 2-3/4" (B), Cap Screw, Cap Screw; 7/16"X2-3/4", Cap Screw; 7/16" X 2-3/4", Cap Screw; 7/16" X 2-3/4" (Hydrostatic Drive Reel), Cap Screw; 7/16" X 2-3/4" (Lh Coupler), Cap Screw; 11.125 X 69.850 mm (7/16" X 2-3/4"), Cap Screw; 7/16" X 2-3/4", (Sub For Gf25164), Cap Screw; (A) 7/16" X 2-3/4", Cap Screw; (B: Quantities Shown Are For One Unit. Two Units Used Per Machine, Except Those Identified With An (A).) 7/16" X 2-3/4", Cap Screw; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16" X 2-3/4"	1
3***5	Eyebolt	1

See all parts with full part numbers in Heavy Parts AI →

Need a specific 2350 - PLOW, MOLDBOARD (SEMI-INTEGRAL) part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.