John Deerewagon, forage(no series)

John Deere 216 - WAGON, FORAGE

Specifications · OEM parts breakdown

Search live 216 - WAGON, FORAGE parts Source or supply its parts

Post a parts request and compare supplier quotes.

John Deere 216 - WAGON, FORAGE specifications

Source specifications

Speed	Forward: 11.3 kmh (7 mph)
Total width	1,250 mm (49.25 in)

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

All 216 - WAGON, FORAGE assemblies by section

Every catalogued assembly group for the John Deere 216 - WAGON, FORAGE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

540 Rpm And 1000 Rpm Drivelines (Year -1974) [C07]

John Deere : 216 - Wagon, Forage : 540 Rpm And 1000 Rpm Drivelines (Year -1974) [C07]

AC***16	Universal Joint	1
AC***18	Yoke With Shaft	1
AC***19	Yoke; (1000 Rpm) Front Complete, Yoke; 1000 Rpm, Yoke; 3.5 cm (1-3/8") Spline (1000 Rpm) (Sub For Ae11199)	1
AC***31	Powershaft Shield	1

See all parts with full part numbers in Heavy Parts AI →

540 Rpm Powershaft (Year 1974- ) [C08]

John Deere : 216 - Wagon, Forage : 540 Rpm Powershaft (Year 1974- ) [C08]

34***48	Spring Pin; 1/8" X 13/16", Used With 20,000 Lbs. Chain, Spring Pin; 1/8" X 13/16", (Use With 20,000 Lb Chain), Spring Pin; 1/8" X 13/16" (Use With Ar90579 Or Ar90583), Spring Pin; 1/8" X 13/16", Spring Pin; 1/8" X 13/16", Spring Pin; (B: 20, 000 Lb.) 1/8" X 13/16", Spring Pin, Spring Pin; (A) 1/8" X 13/16", Spring Pin; 1/8" X 13/16" (A), Spring Pin; 1/8" X 13/16", 6-Row Narrow W/Split Row, Spring Pin; 1/8" X 13/16" (Sub Z9785h), Spring Pin; 1/8"X13/16" (Sub For 34h42)	1
AW***44	Universal Joint With	1
AW***45	Universal Joint With	1
AW***46	Yoke With Tube	1

See all parts with full part numbers in Heavy Parts AI →

Bale Platform [A19]

John Deere : 216 - Wagon, Forage : Bale Platform [A19]

03***60	Bolt; (A) 3/8" X 1-3/4", Bolt, Bolt; 3/8" X 1-3/4"	6
03***18	Bolt; 3/8" X 1-1/2", Locking (For Use With Mcgregor Bracket), Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (For Use With Mcgregor Bracket), Bolt	4
19***06	Cap Screw; 7/16" X 2-3/4" (B), Cap Screw, Cap Screw; 7/16"X2-3/4", Cap Screw; 7/16" X 2-3/4", Cap Screw; 7/16" X 2-3/4" (Hydrostatic Drive Reel), Cap Screw; 7/16" X 2-3/4" (Lh Coupler), Cap Screw; 11.125 X 69.850 mm (7/16" X 2-3/4"), Cap Screw; 7/16" X 2-3/4", (Sub For Gf25164), Cap Screw; (A) 7/16" X 2-3/4", Cap Screw; (B: Quantities Shown Are For One Unit. Two Units Used Per Machine, Except Those Identified With An (A).) 7/16" X 2-3/4", Cap Screw; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16" X 2-3/4"	8
A1***46	Pin; (A) (Sub For Cc23844, This Application), Pin; (Sub For A3581r), Pin; (Sub For Ty7162 Or Ty7014), Pin; (Sub For Z27858 Or L24810), Pin; (Sub For Ty7162), Pin; (C: To Make Semi-Mount Compatible With 4700 Tractors) (D: Accommodates Category 1 Hitch), Pin; (A: 446( - 13*93) 546( - 1373)) (1 Used On 446)(2 Used On 546), Pin, Pin; (Sub For Ty7014), Pin; (B), Pin; (Use With Ah143871), Pin; (A), Pin; (A) (1 Used On 466)(2 Used On 566), Pin; (Sub For A3581r, This Application), Pin; (C: Starting From Series Number 2109 (0701- ), 2111 (0601- ), 2113 (0604- ), 2115 (0602- )) (D: Starting From Series Number 2117 (0602- ), 2122 (0601- ), 2126 (06**06- )) 2130, Pin; (A) (1 Used On 456)(2 Used On 556), Pin; (Sub For A3581r) Appl	2

See all parts with full part numbers in Heavy Parts AI →

Bed (Year -1974) [A12]

John Deere : 216 - Wagon, Forage : Bed (Year -1974) [A12]

03***65	Bolt, Bolt; (C) (D) 3/8" X 3", Bolt; 3/8" X 3" (913-5 Used; 915-6 Used; 918-7 Used; 920, 922-8 Used; 925-10 Used; 930-11 Used), Bolt; 3/8" X 3", Bolt; (Use With 24h1219), Bolt; 3/8" X 3", (Use With 12h304 And 14h1076), Bolt; (A) (B) 3/8" X 3", Bolt; (B) 3/8" X 3", Bolt; 3/8" X 3" (213-5;215 & 216-6;218-7;220-8), Bolt; 3/8" X 3", Fertilizer Opener	4
03***74	Bolt; 7/16" X 1-1/2", For Rr2 Or Rr4 Cultivator, Bolt; (E) 7/16" X 1-1/2", Bolt; (M) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", Bolt; (N) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", (Through Guard And Clip), Bolt, Bolt; 7/16" X 1-1/2" For Four Wheel Drive Tractors, Bolt; (A) 7/16" X 1-1/2", Bolt; 7/16"X1-1/2", Bolt; 7/16" X 1-1/2" (Use With E64519)	2
03***02	Bolt	14
03***12	Bolt; (Use With Bp12233)	8

See all parts with full part numbers in Heavy Parts AI →

Bed (Year 1974- ) [A15]

John Deere : 216 - Wagon, Forage : Bed (Year 1974- ) [A15]

03***65	Bolt, Bolt; (C) (D) 3/8" X 3", Bolt; 3/8" X 3" (913-5 Used; 915-6 Used; 918-7 Used; 920, 922-8 Used; 925-10 Used; 930-11 Used), Bolt; 3/8" X 3", Bolt; (Use With 24h1219), Bolt; 3/8" X 3", (Use With 12h304 And 14h1076), Bolt; (A) (B) 3/8" X 3", Bolt; (B) 3/8" X 3", Bolt; 3/8" X 3" (213-5;215 & 216-6;218-7;220-8), Bolt; 3/8" X 3", Fertilizer Opener	4
03***74	Bolt; 7/16" X 1-1/2", For Rr2 Or Rr4 Cultivator, Bolt; (E) 7/16" X 1-1/2", Bolt; (M) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", Bolt; (N) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", (Through Guard And Clip), Bolt, Bolt; 7/16" X 1-1/2" For Four Wheel Drive Tractors, Bolt; (A) 7/16" X 1-1/2", Bolt; 7/16"X1-1/2", Bolt; 7/16" X 1-1/2" (Use With E64519)	2
03***02	Bolt	14
03***12	Bolt; (Use With Bp12233)	8

See all parts with full part numbers in Heavy Parts AI →

Bed Conveyor Chain [B13]

John Deere : 216 - Wagon, Forage : Bed Conveyor Chain [B13]

11***12	Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm	1
AC***84	Conveyor; (214, 15 Used; 216, 22 Used), Conveyor; (34 Used For 122 And 42 Used For 125)	0
AC***47	Link; (214, 30 Used; 216, 44 Used), Link; (Includes 11m7012 And W29025)	0
AC***49	Slat; (34 Used For 122 And 42 Used For 125), Slat; 214, (216, 22 Used)	15

See all parts with full part numbers in Heavy Parts AI →

Conveyor Drive (Front And Rear Unloading) [B22]

John Deere : 216 - Wagon, Forage : Conveyor Drive (Front And Rear Unloading) [B22]

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	2
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	3
14***93	Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)	3
19***65	Cap Screw; (A) 3/8"X3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4") Longitud=95.5mm (3.76") Frente=M10, Cap Screw; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8" X 1-3/4", Cap Screw; (A: Quad-Range Transmission) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Sub For H2783b), Cap Screw; 3/8" X 1-3/4", (2 Used Single) (4 Used Dual), Cap Screw; 3/8" X 1-3/4" (Use With O.And S.), Cap Screw; (A: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Rear Hitch Option), Cap Screw; 3/8" X 1-3/4", (Na-G, Na-L), Cap Screw; (B) 3/8"X1-3/4", Cap Screw; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Chrysler No. 17*45), Cap Screw, Cap Screw; (A) (C) 3/8" X 1-3/4", (Use With Ar45483), Cap Screw; (K) 3/8" X 1-3/4", Cap Screw; (B: Hi-Crop) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", For 5 Section, Cap Screw; 3/8" X 1-3/4", (Ea-G, Ge-01), Cap Screw; 3/8" X 1-3/4", (Ea-G, Hb-G, Ge-01, Gh-01), Cap Screw; 3/8" X 1-3/4", (Illustrated), Cap Screw; 3/8" X 1-3/4", Code 2309 And 2310, Cap Screw; 3/8" X 1-3/4" (Use With C11812 And K36707), Cap Screw; 3/8" X 1-3/4", (100 Per Package) (Sub For Mg88428), Cap Screw; (C: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (4010 And 4320), Cap Screw; 3/8" X 1-3/4", (Use With 12h304 And 14h1076), Cap Screw; 3/8" X 1-3/4", (Use With R58717), Cap Screw; 3/8" X 1-3/4" (Use With Ae24403), Cap Screw; 3/8" X 1-3/4", (Beet, Bean And Vegetable), Bolt, Cap Screw; 3/8" X 1-3/4", (Na-D), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (2 Used, A) (1 Used, B), Cap Screw; 3/8" X 1-3/4", For 915, Cap Screw; 3/8" X 1-3/4", For Spike-Tooth Sections, Cap Screw; 3/8"X1-3/4", Cap Screw; (B: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4", Cap Screw; 3/8"X1-3/8", Cap Screw; (A: ( -Xxxxxx) 7710-0027; 7810-00*92) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Sae 8), Cap Screw; 2/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4" (Use With Bp12233), Cap Screw; 3/8" X 1-3/4", (2 Used Syncro-Range) (1 Used Power Shift), Cap Screw; (B), Cap Screw; 3/8" X 1-3/4", (Sub (2) 24h1309), Cap Screw; 3/8" X 1-3/4", Low, Cap Screw; (A: 2 Used Dual, 2 Used Triple) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With 14h812), Cap Screw; 3/8" X 1-3/4" (Use With 14h812), (Adjustable Rear Axle), Cap Screw; (A) 3/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Code 6401), Cap Screw; 3/8" X 1-3/4", (For An152412 Shield), Cap Screw; (A) (C) 3/8" X 1-3/4", (Fuel), Cap Screw; 3/8" X 1-3/4", (Notch Filler-Each Side), Cap Screw; 3/8" X 1-3/4" (With Dial-A-Matic), Cap Screw; 3/8" X 1-3/4", (Power Shift), Cap Screw; 3/8" X 1-3/4", Code 2306 And 2307, Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4"), Cap Screw; 3/8" X 3/4", Cap Screw; (A) 3/8" X 1-3/4", Cap Screw; (A: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (D) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; 3/8" X 1-3/4" (Hi-Crop), Cap Screw; 3/8" X 1-3/4" 3/8 Unc-2a X 1 3/4 A17d Zn, Cap Screw; 3/8" X 1-3/4" (Without Dial-A-Matic), Cap Screw; 3/8" X 1-3/4" (100 Per Package) (Sub For Mg88428), Cap Screw; (B) 3/8" X 1-3/4", (Sub For T16517), Cap Screw; 3/8" X 1-3/4", (Sae 8), Cap Screw; (A), Cap Screw; 3/8" X 1-3/4", (Less Rockshaft), Cap Screw; 3/8"X1", Cap Screw; 3/8" X 1-3/4" (Differential Lock), Cap Screw; 3/8" X 1-3/4", Use When Hitch Is Lowered, Cap Screw; 3/8" X 1", Cap Screw; 3/8" X 1-3/4", (675) 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4" (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4", (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 5440 Model Only, Cap Screw; 3/8"X1-1/4" (Sub For 19h246), Cap Screw; 3/8" X 1-3/4", (K1) (K2), Cap Screw; 3/8" X 1-3/4", R.H., Cap Screw; 3/8" X 1-3/4", For 4 Section, Cap Screw; 3/8" X 1-3/4" (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8) (Sub For 19h3217, This Application), Cap Screw; 3/8" X 1-3/4", (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Use With 12h304), Cap Screw; 3/8" X 1-3/4", (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8), (Sub For 19h3217, This Application), Cap Screw; (A) (C) 3/8"X1-3/4", Cap Screw; 3/8"-16 Unc X1-3/4", Cap Screw; 3/8" X 1-3/4" Rh, Cap Screw; 3/8" X 1-3/4", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8"-16 Nc X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4" 1524-2235mm (60"-88"), Cap Screw; 9.525 X 44.450 mm, Cap Screw; 3/8" X 1-3/4", (Sub 19h3217), Cap Screw; 3/8" X 1-3/4", (Sub For Ty7101), Cap Screw; 3/8" X 1-3/4", (2 Used Single Selective Control) (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4", (3020), Cap Screw; 3/8" X 1-3/4", (3020e), Cap Screw; 3/8" X 1-3/4", (Sub For Hmx03276), Cap Screw; 3/8"X3/4", Cap Screw; (A: Germany) 3/8" X 1-3/4"	1

See all parts with full part numbers in Heavy Parts AI →

Conveyor Drive (Front Unloading) [B19]

John Deere : 216 - Wagon, Forage : Conveyor Drive (Front Unloading) [B19]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	0
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	0
14***93	Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot)	0
19***65	Cap Screw; (A) 3/8"X3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4") Longitud=95.5mm (3.76") Frente=M10, Cap Screw; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8" X 1-3/4", Cap Screw; (A: Quad-Range Transmission) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Sub For H2783b), Cap Screw; 3/8" X 1-3/4", (2 Used Single) (4 Used Dual), Cap Screw; 3/8" X 1-3/4" (Use With O.And S.), Cap Screw; (A: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Rear Hitch Option), Cap Screw; 3/8" X 1-3/4", (Na-G, Na-L), Cap Screw; (B) 3/8"X1-3/4", Cap Screw; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Chrysler No. 17*45), Cap Screw, Cap Screw; (A) (C) 3/8" X 1-3/4", (Use With Ar45483), Cap Screw; (K) 3/8" X 1-3/4", Cap Screw; (B: Hi-Crop) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", For 5 Section, Cap Screw; 3/8" X 1-3/4", (Ea-G, Ge-01), Cap Screw; 3/8" X 1-3/4", (Ea-G, Hb-G, Ge-01, Gh-01), Cap Screw; 3/8" X 1-3/4", (Illustrated), Cap Screw; 3/8" X 1-3/4", Code 2309 And 2310, Cap Screw; 3/8" X 1-3/4" (Use With C11812 And K36707), Cap Screw; 3/8" X 1-3/4", (100 Per Package) (Sub For Mg88428), Cap Screw; (C: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (4010 And 4320), Cap Screw; 3/8" X 1-3/4", (Use With 12h304 And 14h1076), Cap Screw; 3/8" X 1-3/4", (Use With R58717), Cap Screw; 3/8" X 1-3/4" (Use With Ae24403), Cap Screw; 3/8" X 1-3/4", (Beet, Bean And Vegetable), Bolt, Cap Screw; 3/8" X 1-3/4", (Na-D), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (2 Used, A) (1 Used, B), Cap Screw; 3/8" X 1-3/4", For 915, Cap Screw; 3/8" X 1-3/4", For Spike-Tooth Sections, Cap Screw; 3/8"X1-3/4", Cap Screw; (B: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4", Cap Screw; 3/8"X1-3/8", Cap Screw; (A: ( -Xxxxxx) 7710-0027; 7810-00*92) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Sae 8), Cap Screw; 2/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4" (Use With Bp12233), Cap Screw; 3/8" X 1-3/4", (2 Used Syncro-Range) (1 Used Power Shift), Cap Screw; (B), Cap Screw; 3/8" X 1-3/4", (Sub (2) 24h1309), Cap Screw; 3/8" X 1-3/4", Low, Cap Screw; (A: 2 Used Dual, 2 Used Triple) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With 14h812), Cap Screw; 3/8" X 1-3/4" (Use With 14h812), (Adjustable Rear Axle), Cap Screw; (A) 3/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Code 6401), Cap Screw; 3/8" X 1-3/4", (For An152412 Shield), Cap Screw; (A) (C) 3/8" X 1-3/4", (Fuel), Cap Screw; 3/8" X 1-3/4", (Notch Filler-Each Side), Cap Screw; 3/8" X 1-3/4" (With Dial-A-Matic), Cap Screw; 3/8" X 1-3/4", (Power Shift), Cap Screw; 3/8" X 1-3/4", Code 2306 And 2307, Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4"), Cap Screw; 3/8" X 3/4", Cap Screw; (A) 3/8" X 1-3/4", Cap Screw; (A: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (D) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; 3/8" X 1-3/4" (Hi-Crop), Cap Screw; 3/8" X 1-3/4" 3/8 Unc-2a X 1 3/4 A17d Zn, Cap Screw; 3/8" X 1-3/4" (Without Dial-A-Matic), Cap Screw; 3/8" X 1-3/4" (100 Per Package) (Sub For Mg88428), Cap Screw; (B) 3/8" X 1-3/4", (Sub For T16517), Cap Screw; 3/8" X 1-3/4", (Sae 8), Cap Screw; (A), Cap Screw; 3/8" X 1-3/4", (Less Rockshaft), Cap Screw; 3/8"X1", Cap Screw; 3/8" X 1-3/4" (Differential Lock), Cap Screw; 3/8" X 1-3/4", Use When Hitch Is Lowered, Cap Screw; 3/8" X 1", Cap Screw; 3/8" X 1-3/4", (675) 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4" (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4", (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 5440 Model Only, Cap Screw; 3/8"X1-1/4" (Sub For 19h246), Cap Screw; 3/8" X 1-3/4", (K1) (K2), Cap Screw; 3/8" X 1-3/4", R.H., Cap Screw; 3/8" X 1-3/4", For 4 Section, Cap Screw; 3/8" X 1-3/4" (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8) (Sub For 19h3217, This Application), Cap Screw; 3/8" X 1-3/4", (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Use With 12h304), Cap Screw; 3/8" X 1-3/4", (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8), (Sub For 19h3217, This Application), Cap Screw; (A) (C) 3/8"X1-3/4", Cap Screw; 3/8"-16 Unc X1-3/4", Cap Screw; 3/8" X 1-3/4" Rh, Cap Screw; 3/8" X 1-3/4", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8"-16 Nc X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4" 1524-2235mm (60"-88"), Cap Screw; 9.525 X 44.450 mm, Cap Screw; 3/8" X 1-3/4", (Sub 19h3217), Cap Screw; 3/8" X 1-3/4", (Sub For Ty7101), Cap Screw; 3/8" X 1-3/4", (2 Used Single Selective Control) (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4", (3020), Cap Screw; 3/8" X 1-3/4", (3020e), Cap Screw; 3/8" X 1-3/4", (Sub For Hmx03276), Cap Screw; 3/8"X3/4", Cap Screw; (A: Germany) 3/8" X 1-3/4"	0

See all parts with full part numbers in Heavy Parts AI →

Conveyor Shaft [B04]

John Deere : 216 - Wagon, Forage : Conveyor Shaft [B04]

19***99	Cap Screw; 7/16" X 2", For 6 Section, Cap Screw; 7/16" X 2", For 5 Section, Cap Screw; (A: For 105cc Hydrostatic Pump) 7/16" X 2", Cap Screw; 7/16" X 2", Cap Screw, Cap Screw; 7/16" X 2", For 7 Section, Cap Screw; (B: 105cc) 7/16" X 2", Cap Screw; 7/16" X 2", (Use With M61842 And M61843), Cap Screw; 1/2" X 2-7/16", Cap Screw; (B) 7/16" X 2", Cap Screw; 7/16"X2"	3
19***53	Cap Screw; 7/16"X3-1/2", Cap Screw; 7/16" X 3-1/2", Cap Screw; 7/16" X 3-1/2" (2 Used Per Stake), Cap Screw; 7/16" X 3-1/2", (Single Or Triple), Cap Screw, Cap Screw; (Use With K40006), Cap Screw; (214), Cap Screw; 7/16" X 3-1/2" (Stake To Frame), Cap Screw; 7/16" X 3-1/2", (Single And Triple), Cap Screw; 7/16" X 3-1/2" (Single And Triple), Cap Screw; (A: For Four-Wheel Drive Only) 7/16" X 3-1/2"	5
19***97	Cap Screw; (A) 1/2" X 4-3/4" Hs, Sae 8, Cap Screw; 1/2" X 4-3/4", Hs, Sae 8, Cap Screw; 1/2" X 4-3/4", Cap Screw; 1/2" X 4-3/4" (Hs, Sae 8), Cap Screw; 1/2"X4-3/4", Cap Screw; 1/2" X 4-3/4" Hs, Sae 8, Cap Screw, Cap Screw; 1/2" X 4-3/4" (Sub For 19h2224), Cap Screw; 1/2" X 4-3/4", (Wire), Cap Screw; 12.700 X 120.650 mm (1/2" X 4-3/4")	3
24***11	Washer; 9/16" X 1-3/8" X 0.105" Incld In 8, Washer; 9/16" X 1-3/8" X 0.105" Incld In 24, Washer; 9/16" X 1-3/8" X 0.105" (Remove Head), Washer; 9/16" X 1-3/8" X 0.105", (Use With N161501), Washer; 17/32" X 3/4" X 0.060", Washer; 9/16" X 1-3/8" X 0.105" Sub For 24h1273, Washer; 9/16" X 1-3/8" X 0.105" 1/2", (Sub For Mg80700), Washer; 9/16" X 1-3/8" X 0.105" (Sub For Er137243 Appl), Washer; 9/16" X 1-3/8" X 0.105" Lh Front Platform, Washer; (D) 9/16" X 1-3/8" X 0.105", (Sub For M80700), Washer; 9/16" X 1-3/8" X 0.105", (Not Illustrated), Washer; (A), Washer; (A: 28" Spring Trip Standard) 9/16" X 1-3/8" X 0.105", Washer; 9/16" X 1-3/8" X 0.105" (Not Illustrated), Washer; 9/16" X 1-3/8" X 0.105" Incld In 12, Washer; 14.275 X 34.925 X 2.667 mm, Already On Machine, Washer, Washer; X 9/16" X 1-3/8" X .105", Washer; 9/16" X 1-3/8" X 0.105" Incld In 15, Washer; (A: Os Tires) 9/16" X 1-3/8" X 0.105", Washer; 9/16"X1-3/8"X.105", Washer; 9/16" X 1-3/8" X 0.105" (Diesel), Washer; 9/16" X 1-3/8" X 0.105" Already On Machine, Washer; 9/16" X 1-3/8" X 0.105", Washer; (A) 9/16" X 1-3/8" X 0.105", Washer; 14.275 X 34.925 X 2.667 mm, Washer; 9/16" X 1-3/8" X .105", Washer; (A: ( -Xxxxxx) Serial No. 8450-00*46; 8650-00*79) 9/16" X 1-3/8" X 0.105", Washer; 9/16" X 1-3/8" X 0.105", 1/2", Washer; (B) 9/16" X 1-3/8" X 0.105", Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 9/16" X 1-3/8" X 0.105", Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 9/16" X 1-3/8" X 0.105", Washer; 9/16" X 1-3/8" X 0.105", (5 Used L.H.) (5 Used R.H.), Washer; 9/16" X 1-3/8" X 0.105", (Use With N189637), Washer; 9/16"X1-3/4"X.105", Washer; (A: Include In Cb11415851 Retainer Kit) 9/16" X 1-3/8" X 0.105", Washer; 14.275 X 34.925 X 2.667 mm, Incld In A, Washer; 9/16" X 1-3/8" X 0.105" (213-7 Used; 215 And 216-9 Used; 218-11 Used; 220, 222, And 224-13 Used), Washer; (A: Oversize Tires) 9/16" X 1-3/8" X 0.105", Washer; (C) 9/16" X 1-3/8" X 0.105"	3

See all parts with full part numbers in Heavy Parts AI →

Cross Conveyor [C01]

John Deere : 216 - Wagon, Forage : Cross Conveyor [C01]

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	3
03***39	Bolt; 5/16" X 5/8" (38"), Bolt; X 5/16" X 5/8", Bolt; 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8" Std. Neck, Bolt; 5/16" X 5/8" (213-2 Used; 215 And 216-4 Used; 218-6 Used; 220, 222, And 224-8 Used), Bolt; 5/16" X 5/8" (30"), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; 5/16" X 5/8" (Use With 12h334 And 14h611)	8
03***41	Bolt; 7/16" X 3/4", Bolt	2
11***30	Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00*13), 5403 (-0075)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (6901-) 9550sh (6901-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 4460-, 5520: Sn 45*01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm	5

See all parts with full part numbers in Heavy Parts AI →

Decal Kit [C09]

John Deere : 216 - Wagon, Forage : Decal Kit [C09]

AC***30

Kit; Kit, Decal

See all parts with full part numbers in Heavy Parts AI →

Elevating Extension For Cross Conveyor [C05]

John Deere : 216 - Wagon, Forage : Elevating Extension For Cross Conveyor [C05]

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	2
03***74	Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.	15
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	4

See all parts with full part numbers in Heavy Parts AI →

Extension For Cross Conveyor [C04]

John Deere : 216 - Wagon, Forage : Extension For Cross Conveyor [C04]

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	2
11***30	Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00*13), 5403 (-0075)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (6901-) 9550sh (6901-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 4460-, 5520: Sn 45*01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm	2
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	2
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	2

See all parts with full part numbers in Heavy Parts AI →

First And Second Beaters [B08]

John Deere : 216 - Wagon, Forage : First And Second Beaters [B08]

03***80	Bolt; (D), Bolt; (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 1-1/4" (Sub For 03h1505), Bolt; (A) 3/8" X 1-1/4", Bolt; (E), Bolt; 3/8" X 1-1/4" L.H. Side (Use With 14h812), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/4" (With Skid Plates), Bolt; X 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", For 8n, Bolt; 3/8" X 1-1/4" (21 Used, 18'; 23 Used, 20'), Bolt; 3/8"X1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; (C) 3/8" X 1-1/4", Bolt; (A) (B) (C) (D) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; (A) (B) (C) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", Use With Furrower; For 8- And 12-Row, Bolt; 3/8" X 1-1/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 1-1/4", (4 Used On Diesel Tractor Only), Bolt; 3/8" X 1-1/4" (Sub For 10h1027), Bolt; 9.525 X 31.750 mm (3/8" X 1-1/4"), Bolt; 3/8" X 1-1/4", (A), Bolt	2
03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	3
03***36	Bolt; 3/8" X 3-1/2", (Sub For Mg280348) Carriage (Sub For Mg88943), Bolt, Bolt; 3/8"X3-1/2", Bolt; 3/8" X 3-1/2", Bolt; X 3/8" X 3-1/2"	4
11***83	Cotter Pin; (Sub For 11h211), Cotter Pin; 3.200 X 20 mm (Stainless Steel), Cotter Pin; 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm (Sub For 11h211), Cotter Pin; 3.200 X 20 mm (Sub For 11h211) (Stainless Steel), Cotter Pin, Cotter Pin; (A: Auxiliary Hydraulic Outlet) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm Front, Cotter Pin; (Use With Lva10608), Cotter Pin; 3.200 X 20 mm, (Sub For C17413), Cotter Pin; 3.200 X 20 mm, (Sub For 11h211), Cotter Pin; 3.200 X 20 mm (Use With Lva10608)	4

See all parts with full part numbers in Heavy Parts AI →

Front Control [B21]

John Deere : 216 - Wagon, Forage : Front Control [B21]

03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	3
03***81	Bolt; 3/8"X5/8", Bolt; 3/8" X 5/8", Bolt	3
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	3
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	3

See all parts with full part numbers in Heavy Parts AI →

Gear Case [B14]

John Deere : 216 - Wagon, Forage : Gear Case [B14]

15***37	Pipe Plug; 3/4"-14npt (1901), Pipe Plug; 1/2", Pipe Plug, Pipe Plug; 1/2"-14npt	1
15***54	Fitting	1
19***26	Cap Screw; 3/8" X 2-1/4" (Round Shaft), Cap Screw; 3/8" X 2-1/4", (6211), Cap Screw; 3/8" X 2-1/4", For 5 Section, Cap Screw; 3/8" X 2-1/4", (Ea-D, De-01), Cap Screw; 3/8" X 2-1/4", (120 Used L.H.) (120 Used R.H.), Cap Screw; 3/8" X 2-1/4", (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8"X2-1/4", For 3179dl004, Cap Screw; 3/8" X 2-1/4" Low, Cap Screw; 3/8" X 2-1/4", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G), Cap Screw; (A) Roosa Master Dp,3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.9 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4, Cap Screw; (D) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" (Sub For 19h1164), Cap Screw; 3/8"X2-1/4", For 3179dl001, Cap Screw; 3/8" X 2-1/4", (Na-6, Gn-01), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.8 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8"X2-1/4", For 3179dl016, Cap Screw; 3/8" X 2-1/4", For 7 Section, Cap Screw; 3/8" X 2-1/4", (Gh-01), Cap Screw; (A: ( -Xxxxxx) 4250-00*71; 4450-0105) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (4219 Dn-02), Cap Screw; 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", W/ 24m7106, Cap Screw; 3/8" X 2-1/4", Code 6201, Cap Screw; 3/8"X2-1/4" (Sub For 19h255), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sae 8), Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (10 Used, 1217; 13 Used, 1219) Each Additional Tooth Bar, Cap Screw; 3/8" X 2-1/4", (Ha-G), Cap Screw; 3/8" X 2-1/4", (2514,9701), Cap Screw; 3/8" X 2-1/4", (Use With Single Selective Control), Cap Screw; 3/8" X 2-1/4" (Sae 8), Cap Screw; 3/8" X 2-1/4", (Code 6202), Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4" (Qrt), Cap Screw; 3/8"X2-1/4", For 3179dl013, Cap Screw; 3/8" X 2-1/4", (Use With R50415), Cap Screw; 3/8" X 2-1/4", (Ea-6), Cap Screw; 3/8 X 2-1/4", Cap Screw; 3/8" X 2-1/4", (2514,9138), Cap Screw; 3/8" X 2-1/4", (Use With Re19944), Cap Screw; (A) (B) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sub For 19h1164), Cap Screw; 3/8" X 2-1/4" (A), Cap Screw; 3/8" X 2-1/4", (Sub For 19h1819, This Application), Cap Screw; (B) 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4" (For Ar97712), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4", (To Bolt Bracket To Cab), Cap Screw; (A) 3/8"X2-1/4" \|, Cap Screw; 3/8" X 2-1/4", (9138), Cap Screw; (B) 3/8" X 2-1/4", Cap Screw; (A) 3/8" X 2-1/4", Cap Screw; (B: Power Shift Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (Na-D, Dn-01), Cap Screw; 3/8"X2"-1/4", Cap Screw; 3/8" X 2-1/4" (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8" X 2-1/4", Hs, Sae 8, 3/8" X 2-3/8" (Code 2111), Cap Screw; 3/8" X 2-1/4" (Upper), Cap Screw; 3/8" X 2-1/4", (40 Used,1217;65 Used,1219), Cap Screw; 3/8" X 2-1/2" (Sub For 19h1733), Cap Screw; 3/8" X 2-1/4", (Upper), Cap Screw; 3/8" X 2-1/4", For 503b And 506b, Cap Screw; 3/8" X 2-1/4" (To Bolt Bracket To Cab), Cap Screw; 3/8" X 2-1/4" (Sub For H86656), Cap Screw; 3/8" X 2-1/4" L.H., Cap Screw; 3/8" X 2-1/4", (Rc, Ru, Rus), Cap Screw; 3/8" X 2-1/4" Front, Cap Screw; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Less Cab), Cap Screw; 3/8" X 2-1/4", (Ha-D, Hb-D), Cap Screw; 3/8" X 2-1/4" Sub For 19h1164, Cap Screw; 3/8" X 2-1/4", (18 Used Per Tooth Bar, 3.7 M (12-Ft.) (21 Used Per Tooth Bar, 4.3 M (14-Ft.), Cap Screw; 3/8" X 2-1/4" (Use With R50415), Cap Screw; (A) 3/8"X2-1/4", Cap Screw, Cap Screw; (D) 3/8" X 2-1/4", (17'-11" Through 26'-5"), Cap Screw; (For 24m7106), Cap Screw; 3/8" X 2-1/4" (Use With 12h304 And 14h812), Cap Screw; (A) 7.50-16 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Cap Screw; 3/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 9.525 X 57.150 mm, Cap Screw; 3/8"X2-1/4" (W/ At19509), Cap Screw; 3/8" X 2-1/4" (Use With 14h812), Cap Screw; 3/8"X2-1/4" (For At19509), Cap Screw; 3/8" X 2-1/4" (Dn-03, Nb-D), Cap Screw; 3/8" X 2-1/4", For 6 Section, Cap Screw; 3/8" X 2-1/4", (9140), Cap Screw; 3/8" X 2-1/4", No. 19 Hitch, Cap Screw; 3/8" X 2-1/4", (Diesel), Cap Screw; (A) 3/8"X2-1/4" (Marked L41202), Cap Screw; 3/8" X 2-1/4", L.H., Cap Screw; 3/8" X 2-1/4", (2513,9140), Cap Screw; (A: ( -Xxxxxx)4560-0027;4760-0050;4960-00**54) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/2"	4
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	2

See all parts with full part numbers in Heavy Parts AI →

Hinged Endgate (Year -1974) [A23]

John Deere : 216 - Wagon, Forage : Hinged Endgate (Year -1974) [A23]

03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	6
03***25	Bolt; 5/16" X 1-1/2", (Use With 12h303 And 14h785), Bolt; (A: Separate Fertilizer Placement) 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2", Bolt, Bolt; (A) 5/16" X 1-1/2", Bolt; 5/16"X1-1/2" (Sub For 03h1790), Bolt; 5/16" X 1-1/2", (12 Used For 122; 13 Used For 125), Bolt; 5/16"X1-1/2"	6
03***43	Bolt; 7/16" X 2-1/2", Bolt	8
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	2

See all parts with full part numbers in Heavy Parts AI →

Hinged Endgate (Year 1974- ) [B01]

John Deere : 216 - Wagon, Forage : Hinged Endgate (Year 1974- ) [B01]

03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	6
03***25	Bolt; 5/16" X 1-1/2", (Use With 12h303 And 14h785), Bolt; (A: Separate Fertilizer Placement) 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2", Bolt, Bolt; (A) 5/16" X 1-1/2", Bolt; 5/16"X1-1/2" (Sub For 03h1790), Bolt; 5/16" X 1-1/2", (12 Used For 122; 13 Used For 125), Bolt; 5/16"X1-1/2"	6
03***43	Bolt; 7/16" X 2-1/2", Bolt	8
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	2

See all parts with full part numbers in Heavy Parts AI →

Hinged Endgate Extension (Year -1974 [A25]

John Deere : 216 - Wagon, Forage : Hinged Endgate Extension (Year -1974 [A25]

03***39	Bolt; 1/2" X 1-3/4" Long, Bolt; Cgb., 1/2" X 1-3/4", Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Square Neck), Bolt; 1/2" X 1-3/4", (Regular), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" (Use With 14h1040), Bolt; 1/2" X 1-3/4" T - Tank, Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt, Bolt; 1/2" X 1-3/4", (Long), Bolt; 1/2" X 1-3/4" Regular, Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Rd. Hd.	2
03***99	Bolt, Bolt; 1/2" X 3-1/2"	2
03***43	Bolt; 7/16" X 2-1/2", Bolt	4
03***44	Bolt, Bolt; 7/16" X 2-3/4"	6

See all parts with full part numbers in Heavy Parts AI →

Hinged Endgate Extension (Year 1974- ) [B03]

John Deere : 216 - Wagon, Forage : Hinged Endgate Extension (Year 1974- ) [B03]

03***39	Bolt; 1/2" X 1-3/4" Long, Bolt; Cgb., 1/2" X 1-3/4", Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Square Neck), Bolt; 1/2" X 1-3/4", (Regular), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" (Use With 14h1040), Bolt; 1/2" X 1-3/4" T - Tank, Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt, Bolt; 1/2" X 1-3/4", (Long), Bolt; 1/2" X 1-3/4" Regular, Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Rd. Hd.	2
03***99	Bolt, Bolt; 1/2" X 3-1/2"	2
03***43	Bolt; 7/16" X 2-1/2", Bolt	4
03***44	Bolt, Bolt; 7/16" X 2-3/4"	6

See all parts with full part numbers in Heavy Parts AI →

Hood [B15]

John Deere : 216 - Wagon, Forage : Hood [B15]

03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	6
03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	59
03***23	Bolt, Bolt; (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", Bolt; (Use With 12h304 And 14h1076) (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", For Gauge Shoe	12

See all parts with full part numbers in Heavy Parts AI →

Ladder [B10]

John Deere : 216 - Wagon, Forage : Ladder [B10]

03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	4
AC***10	Ladder	1

See all parts with full part numbers in Heavy Parts AI →

Left Side (Year -1974) [A08]

John Deere : 216 - Wagon, Forage : Left Side (Year -1974) [A08]

03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	0
03***30	Bolt; 3/8" X 3", Bolt; (Use With 12h304 And 14h1076), Bolt	3
03***23	Bolt, Bolt; (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", Bolt; (Use With 12h304 And 14h1076) (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", For Gauge Shoe	0
19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	14

See all parts with full part numbers in Heavy Parts AI →

Left Side (Year 1974- ) [A09]

John Deere : 216 - Wagon, Forage : Left Side (Year 1974- ) [A09]

03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	0
03***30	Bolt; 3/8" X 3", Bolt; (Use With 12h304 And 14h1076), Bolt	3
03***23	Bolt, Bolt; (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", Bolt; (Use With 12h304 And 14h1076) (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", For Gauge Shoe	0
19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	14

See all parts with full part numbers in Heavy Parts AI →

Main Conveyor Idler Shafts [B18]

John Deere : 216 - Wagon, Forage : Main Conveyor Idler Shafts [B18]

11***30	Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00*13), 5403 (-0075)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (6901-) 9550sh (6901-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 4460-, 5520: Sn 45*01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm	4
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	4
19***40	Cap Screw; 7/16" X 1-3/4", (For Fan Drive), Cap Screw; 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4" (Use With Trw), Cap Screw; 7/16"X1-3/4", Cap Screw; 7/16"X1-3/5", Cap Screw; (Use With 24m7180), Cap Screw; 7/16" X 1-3/4", For 15'3" Harrow, Cap Screw; (A: Rockshaft) 7/16" X 1-3/4" (2 Used Triple) (4 Used Quad), Cap Screw; 7/16" X 1-3/4" (Triple Or Quad) (Rockshaft), Cap Screw; 7/16" X 1-3/4" (Quad) (Less Rockshaft), Cap Screw; (I: Hill Climber Option) 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4", (Use With N166907), Cap Screw; Lh 7/16" X 1-3/4", Cap Screw; 7/16"X1-1/8", Cap Screw; (A: Note; 9550 (70*01- ) 9550sh (7001- )) 7/16" X 1-3/4", Cap Screw; (A) 7/16" X 1-3/4", Cap Screw, Cap Screw; 7/16" X 1-3/4", For 10' And 12' Harrows, Cap Screw; (A: For 9650 (6901- ) & 9750 (6901- )) 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4" (1 Used Dual) (3 Used Triple), Cap Screw; 7/16" X 1-3/5", Cap Screw; (A: Rockshaft) 7/16" X 1-3/4" (Triple Or Quad), Cap Screw; 7/16" X 1-3/4", (Sub 19h2563), Cap Screw; 7/16" X 1-3/4", Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 7/16" X 1-3/4"	4
19***06	Cap Screw; 7/16" X 2-3/4" (B), Cap Screw, Cap Screw; 7/16"X2-3/4", Cap Screw; 7/16" X 2-3/4", Cap Screw; 7/16" X 2-3/4" (Hydrostatic Drive Reel), Cap Screw; 7/16" X 2-3/4" (Lh Coupler), Cap Screw; 11.125 X 69.850 mm (7/16" X 2-3/4"), Cap Screw; 7/16" X 2-3/4", (Sub For Gf25164), Cap Screw; (A) 7/16" X 2-3/4", Cap Screw; (B: Quantities Shown Are For One Unit. Two Units Used Per Machine, Except Those Identified With An (A).) 7/16" X 2-3/4", Cap Screw; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16" X 2-3/4"	4

See all parts with full part numbers in Heavy Parts AI →

Main Drive [B16]

John Deere : 216 - Wagon, Forage : Main Drive [B16]

03***63	Bolt; 3/8" X 3/4", (Sub For Mg280430), Bolt; 3/8" X 3/4", (Sub For 10h1025) Support, Bolt; 3/8" X 3/4" (4 Used On 300a; 6 Used On Grass Seed Special), Bolt; 3/8" X 3/4", (13 Used, 410; 15 Used, 510), Bolt, Bolt; 3/8" X 3/4", (Use With 12h302 And 14h1076), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4", (3.7 M (12-Ft.) Platform, 3 Used) (4.3 M (14-Ft.) Platform, 6 Used), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", Bolt; 3/8"X3/4", Bolt; X 3/8" X 3/4", Bolt; 3/8" X 3/4", (Less Metal Detector), Bolt; 3/8" X 3/4", Cge.,, Bolt; 3/8" X 3/4", Ar, Bolt; 3/8" X 3/4" (Sub For Mg280430), Bolt; 3/8" X 3/4" (A)	4
03***40	Bolt; 5/16" X 3/4", Front, Bolt; 5/16" X 3/4" (454a), Bolt; 5/16" X 3/4" Attachment (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (Thru Backsheet), Bolt; 5/16" X 3/4", (6 Used On 660, 8 Used On 680), Bolt; 5/16" X 3/4" (Use With 14h819), Bolt; 5/16" X 3/4" (213, 215, 216, 220, 224 And 230), Bolt; 5/16" X 3/4", (Rear), Bolt; 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 5/8" (Sub For 03h1268), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", (3.7 M (12-Ft.), 20 Used) (4.3 M (14-Ft.), 24 Used), Bolt; X 5/16" X 3/4", Bolt; (C) 5/16" X 3/4", Bolt; 5/16" X 1" (Sub For 03h1268), Bolt; 5/16" X 3/4", Rd. Hd., Bolt; 5/16" X 3/4" (230), Bolt; (C: Riveted Gatherer Chains) 5/16" X 3/4", Bolt; 5/16" X 3/4" (10 Used, 30") (20" Used, 38"), Bolt; 5/16" X 3/4"Ar, Bolt; 5/16" X 3/4" (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4" (10 Used - 213) (14 Used - 215, 216, 218) (16 Used - 220, 222) (18 Used - 224, 230), Bolt; 5/16" X 3/4", 100 Per Package, (Sub For Mg280497), Bolt; (B: Riveted Gatherer Chain) 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4" 2896 mm (114") (Use With 14h785) (Use With Auger), Bolt; 5/16" X 3/4" (913-14 Used; 915-16 Used; 918-18 Used; 920-20 Used; 922-22 Used; 924 And 925, 26 Used; 930-32 Used), Bolt; 5/16" X 3/4" 100 Per Package, (Sub For Mg280497), Bolt; 5/16" X 3/4" (20) Per Bat, Bolt; 5/16" X 3/4", (3 Used Per Flangette), Bolt; 5/16" X 3/4" (Use With H108670), Bolt; 5/16" X 3/4", (243, 343, 443, 543, 643, 843, And 844), Bolt; 5/16" X 3/4", (2 Used, 347; 4 Used 467), Bolt, Bolt; 5/16" X 3/4" (913-6 Used; 915-8 Used; 918-12 Used; 920-14 Used; 922-16 Used; 924, 925-18 Used; 930-24 Used), Bolt; 5/16" X 3/4" (Sub For E55780, This Application), Bolt; 5/16" X 3/4", (453a, -61*00;454a, -6100;653a, -6100; 654a, -6100;655a, -6150;853a, -6100; 854a, -6150;1253a, -6100), Bolt; 5/16" X 3/4" 5/16" X 3/4", Bolt; 5/16" X 3/4", Europe, Bolt; 5/16"X3/4, Bolt; 5/16" X 3/4", Attachment, Bolt; 5/16" X 3/4", Use With Rotary Air Screen Only, Bolt; (E) 5/16" X 3/4", Bolt; 5/16" X 3/4" (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102418, H109241 And H109243), Bolt; 5/16" X 3/4" (454, 554, 11 Used; 653, 10 Used), Bolt; 5/16" X 3/4", (453a,6101- ;454a,6101-;653a,6101- ; 654a,6101- ;655a,6151- ;853a,6101- ; 854a,6151- ;1253a,6101-), Bolt; 5/16" X 3/4" (10 Used - 913) (14 Used - 915, 918) (16 Used - 920, 922) (18 Used - 924, 925, 930), Bolt; 5/16" X 3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 5/16" X 3/4" (22 Used-854a; 28 Used-1253a), Bolt; (A) 5/16" X 3/4", (Sub For T12497), Bolt; 5/16"X5/8", Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4" (844,6146-; 1243,62*77-), Bolt; 5/16" X 3/4", (653a, 654a, And 853a), Bolt; 5/16" X 3/4", (Use With H102417 And H104909), Bolt; 5/16" X 3/4", (Use With 14h785 And 12h303), Bolt; 5/16" X 3/4", (Use With 12h303 And 14h785), Bolt; 5/16" X 3/4", North America, Bolt; 5/16" X 3/4" (A) (Use With 14h785), Bolt; 5/16" X 3/4" (Use With N10213), Bolt; 5/16" X 3/4", (Use With Ah119132), Bolt; 5/16" X 3/4" (Use With 14h786), Bolt; 5/16" X 3/4", (100 Per Package) (Sub For Mg280497), Bolt; 5/16" X 3/4", (Use With H102424 And H102511), Bolt; (A) 5/16"X3/4", Bolt; 5/16" X 3/4" (A), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" Front, Bolt; 5/16" X 3/4", (Sub For Mg280497) (100 Per Package), Bolt; 5/16" X 3/4", Without Air Conditioning, Bolt; 5/16" X 3/4" (Use With Ah119132)	6
03***17	Bolt; (A), Bolt; (A) (B), Bolt, Bolt; 3/8" X 1-1/4"	3
11***83	Cotter Pin; (Sub For 11h211), Cotter Pin; 3.200 X 20 mm (Stainless Steel), Cotter Pin; 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm (Sub For 11h211), Cotter Pin; 3.200 X 20 mm (Sub For 11h211) (Stainless Steel), Cotter Pin, Cotter Pin; (A: Auxiliary Hydraulic Outlet) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm Front, Cotter Pin; (Use With Lva10608), Cotter Pin; 3.200 X 20 mm, (Sub For C17413), Cotter Pin; 3.200 X 20 mm, (Sub For 11h211), Cotter Pin; 3.200 X 20 mm (Use With Lva10608)	2

See all parts with full part numbers in Heavy Parts AI →

Rear Control [A22]

John Deere : 216 - Wagon, Forage : Rear Control [A22]

03***65	Bolt, Bolt; (C) (D) 3/8" X 3", Bolt; 3/8" X 3" (913-5 Used; 915-6 Used; 918-7 Used; 920, 922-8 Used; 925-10 Used; 930-11 Used), Bolt; 3/8" X 3", Bolt; (Use With 24h1219), Bolt; 3/8" X 3", (Use With 12h304 And 14h1076), Bolt; (A) (B) 3/8" X 3", Bolt; (B) 3/8" X 3", Bolt; 3/8" X 3" (213-5;215 & 216-6;218-7;220-8), Bolt; 3/8" X 3", Fertilizer Opener	2
03***02	Bolt, Bolt; 1/2" X 5" (9.5l X 15 And 11l X 15) Outside Only, Bolt; 1/2" X 5" Outside Only (9.5l X 15 And 11l X 15), Bolt; 1/2" X 5" (A), Bolt; 1/2" X 5" (Use With Extra Weights), Bolt; (B) 1/2" X 5", Bolt; 1/2" X 5", Bolt; 1/2" X 5" (For Outside Idler Bracket)	2
03***23	Bolt, Bolt; (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", Bolt; (Use With 12h304 And 14h1076) (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", For Gauge Shoe	2
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	2

See all parts with full part numbers in Heavy Parts AI →

Rear Panel (Year -1974) [A06]

John Deere : 216 - Wagon, Forage : Rear Panel (Year -1974) [A06]

03***25	Bolt; 5/16" X 1-1/2", (Use With 12h303 And 14h785), Bolt; (A: Separate Fertilizer Placement) 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2", Bolt, Bolt; (A) 5/16" X 1-1/2", Bolt; 5/16"X1-1/2" (Sub For 03h1790), Bolt; 5/16" X 1-1/2", (12 Used For 122; 13 Used For 125), Bolt; 5/16"X1-1/2"	6
03***34	Bolt; 3/8" X 2", 494an And 694an Planters, Bolt; 3/8" X 2", Fertilizer Opener, Bolt, Bolt; 3/8" X 2", Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used) (4.9 M (16-Ft.) Platform, 96 Used), Bolt; (B) 3/8" X 2", Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used) (4.8 M (16-Ft.) Platform, 96 Used), Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used), Bolt; 9.525 X 50.800 mm (3/8" X 2") (36 Used, 6'; 48 Used, 8'), Bolt; 5/16" X 2", Bolt; 3/8" X 2", (Sub For Mg280745), Bolt; 3/8" X 2", (54 Used, 3.7 M (12-Ft.) Platform) (63 Used, 4.3 M (14-Ft.) Platform)	1
19***40	Cap Screw; 7/16" X 1-3/4", (For Fan Drive), Cap Screw; 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4" (Use With Trw), Cap Screw; 7/16"X1-3/4", Cap Screw; 7/16"X1-3/5", Cap Screw; (Use With 24m7180), Cap Screw; 7/16" X 1-3/4", For 15'3" Harrow, Cap Screw; (A: Rockshaft) 7/16" X 1-3/4" (2 Used Triple) (4 Used Quad), Cap Screw; 7/16" X 1-3/4" (Triple Or Quad) (Rockshaft), Cap Screw; 7/16" X 1-3/4" (Quad) (Less Rockshaft), Cap Screw; (I: Hill Climber Option) 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4", (Use With N166907), Cap Screw; Lh 7/16" X 1-3/4", Cap Screw; 7/16"X1-1/8", Cap Screw; (A: Note; 9550 (70*01- ) 9550sh (7001- )) 7/16" X 1-3/4", Cap Screw; (A) 7/16" X 1-3/4", Cap Screw, Cap Screw; 7/16" X 1-3/4", For 10' And 12' Harrows, Cap Screw; (A: For 9650 (6901- ) & 9750 (6901- )) 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4" (1 Used Dual) (3 Used Triple), Cap Screw; 7/16" X 1-3/5", Cap Screw; (A: Rockshaft) 7/16" X 1-3/4" (Triple Or Quad), Cap Screw; 7/16" X 1-3/4", (Sub 19h2563), Cap Screw; 7/16" X 1-3/4", Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 7/16" X 1-3/4"	1
19***50	Cap Screw, Cap Screw; 7/16" X 6"	6

See all parts with full part numbers in Heavy Parts AI →

Rear Panel (Year 1974- ) [A07]

John Deere : 216 - Wagon, Forage : Rear Panel (Year 1974- ) [A07]

03***25	Bolt; 5/16" X 1-1/2", (Use With 12h303 And 14h785), Bolt; (A: Separate Fertilizer Placement) 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2", Bolt, Bolt; (A) 5/16" X 1-1/2", Bolt; 5/16"X1-1/2" (Sub For 03h1790), Bolt; 5/16" X 1-1/2", (12 Used For 122; 13 Used For 125), Bolt; 5/16"X1-1/2"	6
03***34	Bolt; 3/8" X 2", 494an And 694an Planters, Bolt; 3/8" X 2", Fertilizer Opener, Bolt, Bolt; 3/8" X 2", Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used) (4.9 M (16-Ft.) Platform, 96 Used), Bolt; (B) 3/8" X 2", Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used) (4.8 M (16-Ft.) Platform, 96 Used), Bolt; 3/8" X 2", (3.7 M (12-Ft.) Platform, 72 Used) (4.3 M (14-Ft.) Platform, 84 Used), Bolt; 9.525 X 50.800 mm (3/8" X 2") (36 Used, 6'; 48 Used, 8'), Bolt; 5/16" X 2", Bolt; 3/8" X 2", (Sub For Mg280745), Bolt; 3/8" X 2", (54 Used, 3.7 M (12-Ft.) Platform) (63 Used, 4.3 M (14-Ft.) Platform)	1
19***40	Cap Screw; 7/16" X 1-3/4", (For Fan Drive), Cap Screw; 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4" (Use With Trw), Cap Screw; 7/16"X1-3/4", Cap Screw; 7/16"X1-3/5", Cap Screw; (Use With 24m7180), Cap Screw; 7/16" X 1-3/4", For 15'3" Harrow, Cap Screw; (A: Rockshaft) 7/16" X 1-3/4" (2 Used Triple) (4 Used Quad), Cap Screw; 7/16" X 1-3/4" (Triple Or Quad) (Rockshaft), Cap Screw; 7/16" X 1-3/4" (Quad) (Less Rockshaft), Cap Screw; (I: Hill Climber Option) 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4", (Use With N166907), Cap Screw; Lh 7/16" X 1-3/4", Cap Screw; 7/16"X1-1/8", Cap Screw; (A: Note; 9550 (70*01- ) 9550sh (7001- )) 7/16" X 1-3/4", Cap Screw; (A) 7/16" X 1-3/4", Cap Screw, Cap Screw; 7/16" X 1-3/4", For 10' And 12' Harrows, Cap Screw; (A: For 9650 (6901- ) & 9750 (6901- )) 7/16" X 1-3/4", Cap Screw; 7/16" X 1-3/4" (1 Used Dual) (3 Used Triple), Cap Screw; 7/16" X 1-3/5", Cap Screw; (A: Rockshaft) 7/16" X 1-3/4" (Triple Or Quad), Cap Screw; 7/16" X 1-3/4", (Sub 19h2563), Cap Screw; 7/16" X 1-3/4", Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 7/16" X 1-3/4"	1
19***50	Cap Screw, Cap Screw; 7/16" X 6"	6

See all parts with full part numbers in Heavy Parts AI →

Return Floor And Seals For Cross Conveyor [C03]

John Deere : 216 - Wagon, Forage : Return Floor And Seals For Cross Conveyor [C03]

03***80	Bolt; 3/8"X5/8", Bolt, Bolt; (Use With 12h304 And 14h1076), Bolt; (A) 3/8"X5/8"	4
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	3
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	2
19***00	Screw; 5/16" X 3/4" (B), Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785), Screw; 5/16" X 3/4", (2 Used, 347; 4 Used, 467), Screw; 5/16" X 3/4" (With Grain Tank Extensions), Screw; 5/16" X 3/4", (Hb-225), Screw; (B) 5/16"X3/4", Screw; 5/16" X 3/4" Sgb, Screw; 5/16" X 3/4", (Use Without Spacers), Screw; X 5/16" X 3/4" (Sub For 19h1813), Screw; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16" X 3/4", Screw; (A) (B) 5/16" X 3/4", Screw; 5/16" X 3/4" (Use With Adjustable Sieve), Screw; 5/16" X 3/4", (With Grain Tank Extensions), Screw; (B) 5/16" X 3/4", (Ut), Screw; 5/16" X 3/4" Use One Per H134773, Screw; X 5/16" X 3/4", Screw; (B: (Xxxxxx- ) 4050-00*46; 4250-0193; 4450-0259) 5/16" X 3/4", Screw; 5/16" X 3/4", (Back), Screw; 5/16" X 3/4", Use With Rotary Air Screen Only, Screw; 5/16" X 3/4" (Use Without Spacers), Screw; 5/16" X 3/4" (Use With H136957), Screw; (C: 55 Series Replacement Sgb) 5/16" X 3/4", Screw, Screw; 5/16" X 3/4", (Use With 12h303 And 14h785), Screw; (A) 5/16"X3/4", Screw; 5/16" X 3/4", (Use With R122725), Screw; 5/16" X 3/4", Insecticide Only, Screw; 5/16" X 3/4" (Use With 14h785), Screw; 5/16" X 3/4" (A) (Use With 14h785), Screw; 5/16" X 3/4" (218, 220, 222, 224, And 230), Screw; (Outlet), Screw; 5/16" X 3/4" (Sgb), Screw; (A) (C) (D) 5/16" X 3/4", Screw; (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (B) (Use With 14h785), Screw; 5/16" X 3/4", (Use With Rd. Hole Sieve), Screw; 5/16"-18 Unc X1/2", Screw; 5/16" X 3/4", (Use With Adjustable Sieve), Screw; 5/16" X 3/4", Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Long), Screw; 5/16" X 3/4" (213, 215, And 216), Screw; 5/16" X 3/4" (Rh), Screw; 5/16" X 3/4" Lh, Screw; 5/16" X 3/4" (2 Used, With Grain Tank Extension; 3 Used, Without Grain Tank Extension), Screw; 5/16" X 3/4" (Sub For 19h1936), Screw; 5/16" X 3/4", (Use With Round Hole Sieve), Screw; 5/16" X 3/4" (Used With Straw Chopper), Screw; 5/16" X 3/4" (Sub For 19h2021), Screw; 5/16" X 3/4" (Use With Rd. Hole Sieve), Screw; 5/16" X 3/4" (Use With N10213), Screw; 5/16" X 3/4" (Use With Round Hole Sieve), Screw; 7.925 X 19.050 mm, Screw; 5/16" X 3/4" (Use With 12h303 And 28h1511), Screw; 5/16" X 3/4", (Sub For Mg87872), Screw; 5/16" X 3/4", (Sub N10212, This Application), Screw; 5/16" X 3/4", Germany, Screw; 5/16" X 3/4" (Heat Shield To Vent Base), Screw; (A: ( -Xxxxxx) 4650-0135) 5/16" X 3/4", Screw; 5/16"-18 Unc X3/4", Screw; 5/16" X 3/4", (Hinson Cab), Screw; 5/16" X 3/4" (Fixed Hole Sieve), Screw; 5/16" X 3/4", (Used With Round Hole Sieve), Screw; 5/16" X 3/4", (Corn Head), Screw; 5/16" X 3/4" (Use With Straw Chopper), Screw; (A: ( -Xxxxxx) 4050-0045; 4250-0192; 4450-0258) 5/16" X 3/4", Screw; 5/16"X3/4", Screw; 5/16" X 3/4", Fastener (High-Drum), Cap Screw; 5/16" X 3/4", Screw; (Code 6204), Screw; (Use With R112197), Screw; 5/16" X 3/4" (Use With 12h303 And 14h785) (Use With Round Hole Sieve), Screw; W/ Multi-Crop, Screw; (B: (Xxxxxx- ) 4650-01*36) 5/16" X 3/4", Screw; 5/16" X 3/4", (Code 6204), Screw; 5/16" X 3/4", (1 Used, Variable Drive; 2 Used, Regular And Long Fixed Drive), Screw; 5/16" X 3/4", (R.H. Side), Screw; (A) 5/16" X 3/4", Screw; X 5/16" X 3/4", Screw; (A: Sound-Gard Body) 5/16" X 3/4", Screw; 5/16" X 3/4", Use With Endwise Transport, Cap Screw; 7.925 X 19.050 mm (5/16" X 3/4"), Screw; 5/16" X 3/4", (10 Used, Regular; 14 Used, Long), Screw; (B) 5/16" X 3/4", Screw; 5/16" X 3/4", (Sub For H1085r), Screw; 5/16" X 3/4", (Corn Head And Three-Row Narrow Row-Crop Units), Screw; 5/16" X 3/4" (Use With 12h303), Screw; (Sub For F1002012), Screw; 5/16"X3/4, Screw; 5/16" X 3/4", Use With Amt, Screw; 5/16" X 3/4" (Use With R122725), Screw; 5/16"X1", Screw; 5/16" X 3/4" L.H., Screw; 5/16" X 3/4" (Straw Chopper), Screw; 5/16" X 3/4" (Sub For Am121752), Screw; 5/16" X 3/4", (10 Used, Regular; 12 Used, Long), Screw; 5/16" X 3/4", (3 Used, 347; 4 Used, 467), Screw; (A) (C) 5/16" X 3/4", Screw; 5/16" X 3/4" (C), Screw; 5/16" X 3/4" (Serviced In Ah93991), Screw; 5/16" X 3/4" (A), Screw; 5/16"-18 Nc X 3/4", Screw; 5/16" X 3/4", Less Spout-Trak, Screw; 5/16", Screw; 5/16" X 3/4" (To Transmission Input Housing), Screw; X X X 5/16" X 3/4", Screw; 5/16" X 3/4", For Endwise Transport, Screw; 5/16" X 3/4", (Cornhead Attachment), Screw; 5/16" X 3/4" Rh, Screw; 5/16" X 3/4" (Rh Side), Screw; 5/16" X 3/4", (Hinson), Screw; 5/16" X 3/4", (Used With Rd. Hole Sieve), Screw; 5/16" X 3/4", (Regular), Screw; 5/16" X 3/4" (Outlet), Screw; 5/16" X 3/4", (Insecticide Only), Screw; (B) 5/16" X 3/4", Control Support Side, Screw; 5/16" X 3/4", (Less Air Conditioner), Screw; (A: W/Cab) 5/16" X 3/4", Screw; 5/16" X 3/4", (12 Used, Regular; 16 Used, Long)	5

See all parts with full part numbers in Heavy Parts AI →

Right Side (Year -1974) [A10]

John Deere : 216 - Wagon, Forage : Right Side (Year -1974) [A10]

03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	0
03***65	Bolt, Bolt; (C) (D) 3/8" X 3", Bolt; 3/8" X 3" (913-5 Used; 915-6 Used; 918-7 Used; 920, 922-8 Used; 925-10 Used; 930-11 Used), Bolt; 3/8" X 3", Bolt; (Use With 24h1219), Bolt; 3/8" X 3", (Use With 12h304 And 14h1076), Bolt; (A) (B) 3/8" X 3", Bolt; (B) 3/8" X 3", Bolt; 3/8" X 3" (213-5;215 & 216-6;218-7;220-8), Bolt; 3/8" X 3", Fertilizer Opener	3
03***23	Bolt, Bolt; (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", Bolt; (Use With 12h304 And 14h1076) (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", For Gauge Shoe	0
19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	12

See all parts with full part numbers in Heavy Parts AI →

Right Side (Year 1974- ) [A11]

John Deere : 216 - Wagon, Forage : Right Side (Year 1974- ) [A11]

03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	0
03***30	Bolt; 3/8" X 3", Bolt; (Use With 12h304 And 14h1076), Bolt	3
03***23	Bolt, Bolt; (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", Bolt; (Use With 12h304 And 14h1076) (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", For Gauge Shoe	0
19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	12

See all parts with full part numbers in Heavy Parts AI →

Safety Bar And Lever [B24]

John Deere : 216 - Wagon, Forage : Safety Bar And Lever [B24]

11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	3
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	1
19***36	Cap Screw; 3/8" X 3/4", Screw; 3/8" X 3/4" (Hydrostatic), Screw; 3/8" X 3/4" (4 Used (A)) (6 Used (B)), Screw; (B), Screw; (B) 3/8"X5/8", Screw; 3/8" X 3/4", (5 Used, 347; 7 Used, 467), Screw; (B: W/O Cab) 3/8" X 3/4", Screw; 3/8" X 3/4", (Or), Screw; 9.525 X 19.050 mm, 3/8"X3/4", Screw; (D: (Xxxxxx- ) 4055-00*87; 4255-0081; 4455-0158) 3/8" X 3/4", Cap Screw; 3/8" X 3/4", (Sub For Ffsb107930), Screw; 3/8" X 3/4", (Inner Holes), Screw; 3/8" X 3/4" (C), Screw; 3/8" X 3/4", (For 23, 25, 27-Foot Machines), Screw; 3/8" X 3/4", Screw; 3/8"X3/4", Screw; 3/8" X 3/4" (Inlet), Screw; 3/8" X 3/4", (A/C Factory Installed), Screw; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" X 3/4", Screw; 3/8" X 3/4", (Ru), Screw; (B) 3/8"X 3/4", Screw; 9.525 X 19.050 mm (3/8" X 3/4"), Screw; X X 3/8" X 3/4", Screw; 3/8" X 3/4" (Regular And Long), Screw; 3/8" X 3/4", (Use With 12h304 And 14h1076), Screw; 3/8" X 3/4" (A), Screw; 3/8" X 3/4", (Standard Models), Screw; 3/8" X 3/4", (No Nut), Screw; 3/8" X 3/4", (Rc And St), Screw; (A) 3/8" X 3/4", (Rc, Ru), Screw; 3/8" X 3/4", (Use With 12h304 And 14h1076) (37 Used For 122; 32 Used For 125), Screw; 3/8" X 3/4", 5460 Model Only, Screw; 3/8" X 3/4", (Sub For F2272r), Screw; 3/8"X7/8", Screw; (B) 3/8"X3/4", Screw; (B: Mg803116 Warning Light Kit) 3/8" X 3/4", Screw; (C) 3/8" X 3/4", Screw; (A), Screw; 3/8" X 3/4" D=9.525,L=19.05, Screw; 3/8" X 3/4", 5820 Model Only, Screw; 3/8" X 3/4" (Use With R516730), Screw; (A) 3/8"X5/8", Screw; (A) 3/8"X3/4", Screw; 3/8" X 3/4", (St), Screw; (A) 3/8" X 3/4", Screw; (A) 3/8" X 3/4", (Sub (4) 19h1731 And (4) R21483) (Or, Ut), Screw; (A) 3/8" X 3/4", (Less Engine Coolant Heater), Screw; 3/8" X 3/4", (Use With H149504), Screw; 3/8"X3/4", (Sub For 19h1731), Screw; 3/8" X 3/4", (Ear Corn), Screw; (B) (C) 3/8"X3/4", Screw; 3/8" X 3/4" (Use With 24h1622), Screw; 3/8" X 3/4" (Not Required), Screw; 3/8"X3/4" (Sub For 19h2284), Screw; 9.525 X 19.050 mm, Screw; 3/8" X 3/4" Rh, Screw; 3/8" X 3/4", (Gasoline), Screw; 3/8"X3/4" (Sub For 19h1731), Screw; (A: W/O Sound-Gard Body) 3/8" X 3/4", Screw; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" X 3/4", Screw; 3/8" X 3/4" (Use With 12h304 And 14h812), Screw; 3/8" X 3/4" (Use With H108673), Screw; 3/8" X 3/4" (W/O Sgb), Screw; 3/8" X 3/4", (Hb-G, Gh-01), Screw, Screw; 3/8" X 3/4", Large Hopper, Screw; 3/8" X 3/4", (Less Rockshaft), Screw; (A: W/O Sgb) 3/8" X 3/4", Screw; 3/8" X 3/4" (Sub For 19h983), Screw; 3/8" X 3/4", For Re63363, Screw; (A) 3/8" X 3/4", Outer, Screw; 3/8" X 3/4", (For B27852 Only), Screw; 3/8" X 3/4", (United Kingdom Only), Screw; (Use With R516730), . Bolt, Screw; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" X 3/4", Screw; 3/8" X 3/4", (Use With B31874), Screw; 3/8" X 3/4", (Use With A22412), Screw; (A: W/4-Post Roll-Gard) 3/8" X 3/4" (Sub For R53743), Screw; (B) 3/8" X 3/4", Screw; 3/8" X 3/4", (Inlet), Screw; 3/8" X 3/4" (A) (High Strength), Screw; 3/8" X 3/4", (With Cab), Screw; 3/8" X 3/4", (Hydrostatic), Screw; 3/8" X 3/4" (Dh-01), Screw; 3/8" X 3/4", (Hydrostatic Drive), Screw; (Sub For 19h983), Screw; 3/8" X 3/4" (C) (High Strength), Screw; 3/8" X 3/4" (Use With 12h304), Screw; 3/8" X 3/4", Outer, Screw; 3/8" X 3/4", 5440 Model Only, Screw; 3/8" X 3/4", Germany, Screw; 3/8"-16 Unc X3/4", Screw; 3/8" X 3/4", (1 Used, 24 And 224 Balers) (2 Used, 336 And 348 Balers), Screw; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" X 3/4", Screw; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8" X 3/4" W/Rg, Screw; (D) 3/8" X 3/4", Screw; X 3/8" X 3/4", Screw; 3/8" X 3/4" (Use With 14h812), Screw; (A) (B) 3/8" X 3/4", Screw; 3/8" X 3/4" 918 (65**01- ) 75 Used, Screw; 3/8" X 3/4", (Inside Holes), Screw; 3/8" X 3/4" (D), Screw; 3/8" X 3/4" (6081hh017), Screw; (B) Mc1 3/8"X3/4", Screw; 3/8" X 3/4" (Sub For R28007, This Application), Screw; (A: Not Required) 3/8" X 3/4", Screw; 3/8"X2-1/4", Screw; 3/8" X 3/4", (With Metal Detector), Screw; 3/8"3/4", Screw; 3/8" X 3/4" (918 Rigid), Screw; 3/8" X 3/4", Unc, Screw; 3/8" X 3/4", For B27852 Only, Screw; 3/8" X 3/4", (4 Used (A)) (6 Used (B)), Screw; 3/8" X 3/4", (Use With H108673), Screw; 3/8" X 3/4" (Use With R132928), Screw; 3/8" X 3/4", (To Clip), Screw; (A: European Version) (B: Secondary Brake) 3/8" X 3/4", Screw; 3/8" X 3/4", United Kingdom, Screw; X 3/8" X 3/4", Screw; 3/8" X 3/4", (Sub (4) 19h1731 And (4) R21483), Screw; 3/8"-16 Nc X 3/4", Screw; 3/8" X 3/4", (Lower) (Use With R90994), Screw; 3/8" X 3/4", (1-Row Ear Corn Unit), Screw; 3/8" X 3/4", (Oil Bath Air Cleaner), Screw; 3/8", Screw; (A) 3/8"X3/4" \|, Screw; X 3/8" X 3/4", Screw; 3/8" X 3/4" (To Transmission Case Shield), Screw; 3/8" X 3/4" (Use With H149504), Screw; X X (A) 3/8" X 3/4", Screw; 3/8" X 3/4", (Hb-225), Screw; 3/8" X 3/4" 3/8" X 3/4", Screw; 3/8" X 3/4" Hs=10.9	3
24***19	Washer; 7/16" X 1" X 0.083" (Sub (2) 24h1219 And 24m7101), Washer; 11.125 X 25.400 X 2.108 mm, Incld In 1, Washer; 7/16" X 1" X 0.083", (Sub For M80702), Washer; 7/16" X 1" X 0.083", (Use With N260835), Washer; (A: For 9650 Sts ( -70*00) & 9750sts ( -7000)) 7/16" X 1" X 0.083", Washer; 7/16" X 1" X 0.083", (Sub For Mg80702), Washer; 7/16" X 1" X 0.083", (Use With Aa22080), Washer; 7/16" X 1" X 0.083" (Sub For 24h1219), Washer; 7/16" X 1" X 0.083" (110" And 132"), Washer; 7/16" X 1" X 0.083" (With Standard Lighting), Washer; 7/16" X 1" X 0.083", Runner Opener Only, Washer; 7/16" X 1" X 0.083" (Use With L113717), Washer; 7/16" X 1" X 0.083" (Use With R126271), Washer; 7/16" X 1" X 0.083" (Sub 24h1219 And 24m7101), Washer; 7/16" X 1" X 0.083", (675) (Sub For Mg80702), Washer; 11.125 X 25.400 X 2.108 mm (7/16" X 1" X 0.083"), Washer; 7/16" X 1" X 0.083", Washer; (A) (B) 7/16" X 1" X 0.083", (Sub For Mg80702), Washer; 7/16" X 1" X 0.083" Lifting Lug Cover, Washer; (A: W/ Stationary Right-Hand Glass) 7/16" X 1" X 0.083", Washer; 7/16" X 1" X 0.083", (675) (Use With Mg847537) (Sub For Mg80702), Washer; 7/16" X 1" X 0.083", (24 Used On Model 11, 48 Used On Model 12), Washer; 7/16" X 1" X 0.083" Incld In 36, Washer; 7/16" X 1" X 0.083", (Use With Aa22080, Aa22081 And Aa24267), Washer; 7/16" X 1" X 0.083", (675b) (Sub For Mg80702), Washer; (D) 7/16" X 1" X 0.083", (Sub For Mg80702), Washer; 11.125 X 25.400 X 2.108 mm, Washer; 7/16" X 1" X 0.083", (110" And 132"), Washer; 7/16" X 1" X 0.083" (Sub For T105740), Washer; 7/16" X 1" X 0.083", Inner, Washer; (A: 9550 ( -7000) 9550sh ( -70*00)) 7/16" X 1" X 0.083", Washer; 7/16" X 1" X 0.083", (Use On Top Two Screws), Washer; 7/16" X 1" X 0.083", (30 Used On Model 21, 60 Used On Model 22), Washer; 7/16" X 1" X 0.083" (Sub (2) 24h1219 And 24m7101 ) (Use With R126271), Washer; 7/16" X 1" X 0.083" With Standard Lighting, Washer; 7/16" X 1" X 0.083", Washer; 7/16"X1"X.075", Washer, Washer; 7/16" X 1" X .075", Washer; (B) 7/16" X 1" X 0.083", Washer; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 7/16" X 1" X 0.083", Washer; 7/16" X 1" X 0.083" (132"), Washer; 7/16" X 1" X 0.083" (With Additional Lighting), Washer; 7/16" X 1" X 0.083", Roll Top, Washer; 7/16" X 1" X 0.083" With Additional Lighting	1

See all parts with full part numbers in Heavy Parts AI →

Shields [B07]

John Deere : 216 - Wagon, Forage : Shields [B07]

03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	8
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	2
17***71	Rivet	2
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	4

See all parts with full part numbers in Heavy Parts AI →

Side And Rear Panel Extensions (Year -1974) [A17]

John Deere : 216 - Wagon, Forage : Side And Rear Panel Extensions (Year -1974) [A17]

03***23	Bolt, Bolt; (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", Bolt; (Use With 12h304 And 14h1076) (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", For Gauge Shoe	12
19***22	Screw; 7/16" X 1" (Sub For E54234), Screw; 7/16"X1", Screw; 7/16" X 1", For 12b Section, Screw; 11.125 X 25.400 mm, Screw; 7/16" X 1", (4 Used On Each Stake Attached To Rocking Or Solid Bolster), Screw; (A) 7/16" X 1", Screw; (A), Screw, Screw; 7/16" X 1", (5400), Screw; 7/16" X 1", Screw; 7/16" X 1" (Stake To Bolster), Screw; 7/16" X 1" (Use With R110465), Screw; 7/16" X 1", (Use With Ae46090), Screw; 7/16" X 1" (A), Bolt, Screw; 7/16" X 1", (Sub For E54234), Screw; 7/16" X 1", (Use With Ae46091)	2
19***24	Cap Screw; (216), Cap Screw, Cap Screw; 7/16" X 4-1/2", Cap Screw; 7/16" X 4-1/2", For 6 Section, Cap Screw; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16" X 4-1/2"	2
19***50	Cap Screw, Cap Screw; 7/16" X 6"	4

See all parts with full part numbers in Heavy Parts AI →

Side And Rear Panel Extensions (Year 1974- ) [A20]

John Deere : 216 - Wagon, Forage : Side And Rear Panel Extensions (Year 1974- ) [A20]

03***23	Bolt, Bolt; (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", Bolt; (Use With 12h304 And 14h1076) (214, 6 Used; 216, 7 Used), Bolt; 3/8" X 3-1/4", For Gauge Shoe	12
19***22	Screw; 7/16" X 1" (Sub For E54234), Screw; 7/16"X1", Screw; 7/16" X 1", For 12b Section, Screw; 11.125 X 25.400 mm, Screw; 7/16" X 1", (4 Used On Each Stake Attached To Rocking Or Solid Bolster), Screw; (A) 7/16" X 1", Screw; (A), Screw, Screw; 7/16" X 1", (5400), Screw; 7/16" X 1", Screw; 7/16" X 1" (Stake To Bolster), Screw; 7/16" X 1" (Use With R110465), Screw; 7/16" X 1", (Use With Ae46090), Screw; 7/16" X 1" (A), Bolt, Screw; 7/16" X 1", (Sub For E54234), Screw; 7/16" X 1", (Use With Ae46091)	2
19***24	Cap Screw; (216), Cap Screw, Cap Screw; 7/16" X 4-1/2", Cap Screw; 7/16" X 4-1/2", For 6 Section, Cap Screw; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16" X 4-1/2"	2
19***50	Cap Screw, Cap Screw; 7/16" X 6"	4

See all parts with full part numbers in Heavy Parts AI →

Stringers And Connectors [A05]

John Deere : 216 - Wagon, Forage : Stringers And Connectors [A05]

19***39	Cap Screw; 1/2" X 4-1/2", (For 12.5 M (41') Machine), Cap Screw; 1/2" X 4-1/2", (2 Used On 37 Ft. With 7" And 8" Spacing) (2 Used On 40 Ft. With 7" Spacing), Cap Screw; 1/2" X 4-1/2" (20'-11"), Cap Screw; 1/2" X 4-1/2", (4684, 4884, 5186), Cap Screw; (A) 1/2" X 4-1/2", Cap Screw; 1/2"X4-1/2", Cap Screw; (A) 1/2"X4-1/2", Cap Screw; 1/2"X4-1/2" (Sub For R34598), Cap Screw; 1/2" X 4-1/2", (4 Used For 660 Single Chain, 8 Used For 680 And 660 Double Chain), Cap Screw; 1/2" X 4-1/2" (10-Foot), Cap Screw; 1/2" X 4-1/2", (Sub For 34h375), Cap Screw; 1/2" X 4-1/2", Cap Screw; 1/2" X 4-1/2" (Use With H79449), Cap Screw; 1/2"X41/2", Cap Screw; 1/2"X4-1/2" (Sub For 19h1264), Cap Screw; (Use With K40014)	12
19***15	Cap Screw; 1/2" X 1-1/4", North America, Cap Screw; 1/2" X 1-1/4" (Use With Ty15819, Ty16043, Ty15270 Or Ty16044), Cap Screw; 12.700 X 31.750 mm (1/2" X 1-1/4"), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (For Ty15270, Ty15819, Ty16043 And Ty16044), Cap Screw; 1/2" X 1-1/4" (Use With Re63295), Cap Screw; 1/2" X 1-1/4" (Use With 12h301), Cap Screw; 1/2" X 1-1/4" Nlr, Cap Screw; 1/2" X 1-1/4", (50 Per Package) (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4", (24 Used For 714, 714a; 28 Used For 716, 716a), Cap Screw; 1/2" X 1-1/4" Fenders, Cap Screw; 1/2" X 1-1/4", (Use With M46075), Cap Screw; 1/2 X 1-1/4", Cap Screw; (B) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (17 Used For Front Chain Shields, 26 Used For Rubber Shields, 10 Used For Steel Or Rear Chain Shields), Cap Screw; 5/8" X 2-1/2", Cap Screw; 1/2" X 1-1/4" (For Channel Tongue), Cap Screw; 1/2" X 1-1/4", (18 Used On Front Chain Shields, 26 Used On Rubber Shields, 10 Used On Rear Steel Or Chain Shields), Cap Screw; (A) (B) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Code 2306 And 2307, Cap Screw; 1/2" X 1-1/4" (Rh Side), Cap Screw; (A: Oversize Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", For 760 And 790, Cap Screw; 1/2x1-1/4", Cap Screw; 1/2" X 1-1/4" (Flexible), Cap Screw; 1/2" X 1-1/4" (Rh), Cap Screw; 1/2" X 1-1/4", (Sub For 19h1792), Cap Screw; (E) 1/2" X 1-1/4", Cap Screw; (B: Manual Hitch) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (50 Per Package) (Not Included With Piston Pump) (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4", (Sub For Ffsb109249), Cap Screw; (A) 1/2"X1-1/4", Cap Screw; (C) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" Lh, Cap Screw; 1/2" X 1-1/4", (Use With N202131), Cap Screw; 12.700 X 31.750 mm, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/4", (See Front Idler Support Plates), Cap Screw; (A: Os Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Lh, Cap Screw; 1/2" X 1-1/4" (Use With E54809), Cap Screw; 1/2" X 1-1/4", (For Channel Tongue), Cap Screw; (F) 1/2" X 1-1/4", Cap Screw; (A: (-Xxxxxx) Serial No. 8450-00*18; 8650-00*97) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (W/ Ae33160), Cap Screw; 1/2" X 1-1/4" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/4", (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (540rpm), Cap Screw; 1/2" X 1-1/4", 50 Per Package, (Sub For Mg87670), Cap Screw; 1/2" X 1-1/4" (Flex), Cap Screw, Cap Screw; 1/2" X 1-1/4" 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 1/4", Cap Screw; (D) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 1-1/4", (6" Spacing), Cap Screw; (A) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4" (Use With R110440), Cap Screw; 1/2" X 1-1/4", (For 14 Rotary Hoe), Cap Screw; 1/2" X 1-1/4", Fold Top, Cap Screw; 1/2" X 1-1/4", (Use With An210950), Cap Screw; 1/2"X2", Cap Screw; 1/2" X 1-1/4", (Use With Gd1072), Cap Screw; (E) 1/2" X 1-1/4", Front Gang, Cap Screw; (B: To Be Used With Oversize Tires) 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Code 2309 And 2310, Cap Screw; 1/2" X 1-1/4", (Use With Re63295), Cap Screw; 1/2" X 1-1/4", L.H., Cap Screw; (W) (F) 1/2" X 1-1/4", Cap Screw; 12.700 X 31.750 mm (1/2" X 1-1/4"), Cap Screw; 1/2" X 1-1/4", (Ru And Or), Cap Screw; 1/2" X 1-1/4", Rear Gang, Cap Screw; 1/2" X 1-1/4", (L.H. Only), Cap Screw; R.H., Cap Screw; 1/2" X 1-1/4" (Use With 14h1040 And 12h301), Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2"X1-1/4", Cap Screw; X 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", Plateless Planting Unit, Cap Screw; 1/2" X 1-1/4", (Use With R110440), Cap Screw; X 1/2" X 1-1/4", Cap Screw; 1/2" X 1-1/4", (Use With 12h304 And 14h1040), Cap Screw; 1/2" X 1-1/4" Hs, Sae 8	4
19***68	Cap Screw; 1/2" X 3-3/4" (L.H. Rear), Cap Screw; 1/2" X 3-3/4", L.H., Cap Screw; 1/2"X3-3/4", Cap Screw; 1/2" X 3-3/4", Cap Screw; (Use With K40014), Cap Screw; 1/2" X 3-3/4" (Hs, Sae 8), Cap Screw, Cap Screw; 1/2" X 3-3/4", (Use With Adjustable Gauge Wheel), Cap Screw; 1/2" X 3-3/4" (1000 Rpm), Cap Screw; 1/2" X 3-3/4" (Sub For 19h1945)	12
19***17	Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) (D: Main Frame (5 Section) Single Point) 7/16" X 4-1/4", Cap Screw; 7/16" X 4-1/4", Cap Screw; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer) 7/16" X 4-1/4", Cap Screw, Cap Screw; 7/16" X 4-1/4" 30 Ft - 9 In And 33 Ft - 9 In, Cap Screw; 11.125 X 107.950 mm, Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) (D: Mainframe, (5 Section) Singlepoint) 7/16" X 4-1/4"	8

See all parts with full part numbers in Heavy Parts AI →

Third Beater [B11]

John Deere : 216 - Wagon, Forage : Third Beater [B11]

03***80	Bolt; (D), Bolt; (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 1-1/4" (Sub For 03h1505), Bolt; (A) 3/8" X 1-1/4", Bolt; (E), Bolt; 3/8" X 1-1/4" L.H. Side (Use With 14h812), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/4" (With Skid Plates), Bolt; X 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", For 8n, Bolt; 3/8" X 1-1/4" (21 Used, 18'; 23 Used, 20'), Bolt; 3/8"X1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; (C) 3/8" X 1-1/4", Bolt; (A) (B) (C) (D) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; (A) (B) (C) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", Use With Furrower; For 8- And 12-Row, Bolt; 3/8" X 1-1/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 1-1/4", (4 Used On Diesel Tractor Only), Bolt; 3/8" X 1-1/4" (Sub For 10h1027), Bolt; 9.525 X 31.750 mm (3/8" X 1-1/4"), Bolt; 3/8" X 1-1/4", (A), Bolt	10
03***12	Bolt; (B) 3/8" X 2-1/2", Bolt, Bolt; 3/8" X 2-1/2", Bolt; (A) 3/8" X 2-1/2", Bolt; 3/8" X 2-1/2" Lh, Bolt; 3/8" X 2-1/2", Rd.Hd., Bolt; 3/8" X 2-1/2" (Use With 14h812)	4
03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	10
03***36	Bolt; 3/8" X 3-1/2", (Sub For Mg280348) Carriage (Sub For Mg88943), Bolt, Bolt; 3/8"X3-1/2", Bolt; 3/8" X 3-1/2", Bolt; X 3/8" X 3-1/2"	10

See all parts with full part numbers in Heavy Parts AI →

Unloading Chamber Body [B05]

John Deere : 216 - Wagon, Forage : Unloading Chamber Body [B05]

03***12	Bolt; (B) 3/8" X 2-1/2", Bolt, Bolt; 3/8" X 2-1/2", Bolt; (A) 3/8" X 2-1/2", Bolt; 3/8" X 2-1/2" Lh, Bolt; 3/8" X 2-1/2", Rd.Hd., Bolt; 3/8" X 2-1/2" (Use With 14h812)	4
10***26	Bolt; 3/8"X1", Rh, Bolt; 3/8" X 1", Bolt; (A) 3/8" X 1", 3 Head Plow Bolt, Bolt; 3/8" X 1", Plow, R.H., Bolt; 3/8" X 1", (200), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (W/O Bale Ramps), Bolt; 3/8" X 1", R.H., Bolt; 3/8" X 1" 3/8" X 1" (Use With E86515) Plowbolt, Bolt; 3/8" X 1", (14 Used, Regular; 12 Used, Long), Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", No. 3, Bolt; 3/8"X1", Bolt; 3/8" X 1" 3/8" X 1" (Use With Fh304145) Plowbolt, Bolt; 3/8" X 1" (Use With Fh304145)3/8"X 1" Plowbolt, Bolt; 3/8" X 1" R.H., Bolt; (A: For Steel Moldboard) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X 1" (Use With Fh304145)Plowbolt, Bolt; (B: 24 And 224 Balers) 3/8" X 1", Bolt; (A) 3/8" X 1", Bolt; 3/8"X1",Rh, Bolt; 3/8" X 1" (Nlr), Bolt; 3/8" X 1" (Regular), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1" 3/8"X 1" (Use With Fh304145) Plowbolt, Bolt, Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" 3/8" X 1" Plowbolt, Bolt; 3/8" X 1" (14 Used, Regular; 12 Used, Long), Bolt; 3/8" X 1", (300)	2
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	2
19***22	Screw; 7/16" X 1" (Sub For E54234), Screw; 7/16"X1", Screw; 7/16" X 1", For 12b Section, Screw; 11.125 X 25.400 mm, Screw; 7/16" X 1", (4 Used On Each Stake Attached To Rocking Or Solid Bolster), Screw; (A) 7/16" X 1", Screw; (A), Screw, Screw; 7/16" X 1", (5400), Screw; 7/16" X 1", Screw; 7/16" X 1" (Stake To Bolster), Screw; 7/16" X 1" (Use With R110465), Screw; 7/16" X 1", (Use With Ae46090), Screw; 7/16" X 1" (A), Bolt, Screw; 7/16" X 1", (Sub For E54234), Screw; 7/16" X 1", (Use With Ae46091)	2

See all parts with full part numbers in Heavy Parts AI →

Wagon Pole Extension [A14]

John Deere : 216 - Wagon, Forage : Wagon Pole Extension [A14]

19***34	Cap Screw, Cap Screw; (A) 5/8" X 2", Cap Screw; 5/8' X 2", Cap Screw; 5/8" X 2" (Disk), Cap Screw; (A) (D) 5/8" X 2", Cap Screw; (A: For 9650 (69*01- ) & 9750 (69*01- )) 5/8" X 2", Cap Screw; 5/8" X 2", 2840, 3130, Cap Screw; 5/8" X 2" (Sub 19h1890), Cap Screw; 5/8"X2"Unc, Cap Screw; 5/8"X2 (Sub For 19h1708), Cap Screw; 5/8" X 2" (Use With 12h294 And 14h1039), Cap Screw; 5/8" X 2", 730 Tractor, Cap Screw; (D) 5/8" X 2", Cap Screw; 5/8" X 2" (Hoe), Cap Screw; 5/8" X 2" (Sub For 19h1708), Cap Screw; 5/8" X 2", Cap Screw; (A) 5/8"X2", Cap Screw; 5/8" X 2" (Hs, Sae 8), Cap Screw; 5/8"X2" (Sub For 19h1708), Cap Screw; 5/8"X1-3/4", Cap Screw; 5/8"X2", (Sub For 19h1708), Cap Screw; 5/8"X2", Cap Screw; 1/2", Cap Screw; 5/8"X2" (Sub For 19h1708 Appl)	2
19***24	Cap Screw; 5/8" X 2-1/4", Use When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" R.H. Side Only, Cap Screw; 5/8" X 2-1/4", Required To Connect Unit To Parallel Arms, Cap Screw; 5/8 X 21/2-In., Cap Screw, Cap Screw; 5/8" X 2-1/4", (Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Front Axle), Cap Screw; 5/8" X 2-1/4" (2940, 3030, 3040, 3130, 3140 (37*06-)) (2950, 2955, 3050, 3350), Cap Screw; 5/8" X 2-1/4", Use With N212983 When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Use With Extension, Cap Screw; 5/8" X 2-1/4", (Sub For 19h1734) This Application Only, Cap Screw; (D) 5/8" X 2-1/4", Cap Screw; (B) 5/8" X 2-1/4", Cap Screw; 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Use With 12h294), Cap Screw; (H: Also Use On 4050e And 4250e) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Rh Side Only, Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4", (Used With Wheel Spacers), Bolt, Cap Screw; (C) (G) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Used With Sheel Spacers), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70**00)) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Wing Frame Only, Cap Screw; 5/8" X 2-1/4", Rear Position - 530, 630, 520, 50 Or 60 Tractors; Front Position - 730, 720, Or 70 Tractors., Cap Screw; 5/8" X 2-1/4", (Use When Hitch Is Lowered), Cap Screw; (C) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Planetary Final Drive), Cap Screw; 5/8" X 2-1/4" (To Front Axle Support), Cap Screw; 5/8" X 2-1/4" (Used With Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Cylinder Block), Cap Screw; 5/8" X 2-1/4" (To Cylinder Block), . Bolt, Cap Screw; 15.875 X 57.150 mm	2
19***47	Screw; 5/8" X 2-1/2", Light Bracket, Screw; 5/8"X2-1/2", Screw, Screw; X 5/8" X 2-1/2", Screw; (H: Hydraulic Fold Only.) 5/8" X 2-1/2", Screw; 5/8" X 2-1/2", (Sub For R36511), Screw; 5/8" X 2-1/2", (4 Used Inside, Rear Hinge), Screw; 5/8" X 2-1/2", (Sub For This Application 19h3244), Screw; 5/8" X 2-1/2" Code 1405, Screw; 5/8" X 2-1/2" (Use With 12h294), Screw; 5/8" X 2-1/2" (Sub For 19h1756), Screw; 5/8"X2-1/2" Unc, Screw; 5/8" X 2-1/2" Bottom Two Mounting Holes (Also Holds Front Weight), Screw; 5/8" X 2-1/2", (11 Used With Remote Cylinder Selective Control) (12 Used Less Remote Cylinder Selective Control), Screw; (A) 5/8" X 2-1/2", Screw; 5/8" X 2-1/2" (Use With 14h1039 And 12h294), Screw; 5/8" X 2-1/2", Screw; 5/8" X 2-1/2", (Also Order R49098) (Sub For R27818), Screw; Sprocket Adapter Flange To Rear Axle Shaft, Screw; 5/8"X2-1/2" (Sub For 19h1863), Screw; 5/8" X 2-1/2" (6359tr), Screw; 5/8"X2-1/2",13.6-36, Screw; Code 1421, Screw; (A) 5/8"X2-1/2", Screw; 5/8" X 2-1/2", (Sub For 19h3244, This Application), Screw; 5/8" X 2-1/2", R.H.	2
BP***95	Lock Nut; (Sub U44915), Lock Nut; 5/8", Lock Nut, Lock Nut; 15.875 mm (5/8") (Sub K40015), Lock Nut; 3/8"	4

See all parts with full part numbers in Heavy Parts AI →

Need a specific 216 - WAGON, FORAGE part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.