John Deeredisk(no series)
John Deere 1635 - DISK
Specifications · OEM parts breakdown
Post a parts request and compare supplier quotes.
The John Deere 1635 is a utility tractor. It features a 2WD drive system with power steering and a gear transmission offering 8 forward and 4 reverse speeds.
John Deere 1635 - DISK specifications
Engine
| Cylinders | 3 |
Service capacities (summary)
| Fuel tank | 73.4 L (19.4 gal) |
Source specifications
| Bore | 4.19 in ( 106.4 mm ) |
| Stroke | 4.33 in ( 110 mm ) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
All 1635 - DISK assemblies by section
Every catalogued assembly group for the John Deere 1635 - DISK. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Drawbar, Leveling Screw And Clevis Safety Chain (1984- ) [A06]
John Deere : 1635 - Disk : Drawbar, Leveling Screw And Clevis Safety Chain (1984- ) [A06]
| 08***19 | Cap Screw; (Sub For R34829), Cap Screw; 7/8" X 6-1/2" (Use With R34680, R48954, R48955, R52160 Or R70309) (Sub For R34829), Cap Screw; 7/8" X 6-1/2" 7/8" X 6-1/2", Cap Screw; 7/8" X 6-1/2" (Use With R34680 Or R52160), Cap Screw; (A) (B) (Sub For R34829) (Use With 34" Or 38" Wheels), Cap Screw; (B) 7/8" X 6-1/2", (Sub For R34829), Cap Screw; 7/8" X 6-1/2" 7/8" X 6-1/2" (Use With R34680, R52160, R33450 Or R70309), Cap Screw; 7/8" X 6-1/2", (Use With R48955, R48954, R33450, R52160 Or R70309) (Sub For R34829), Cap Screw; 7/8" X 6-1/2" ((A) (B) (C) And 4000 Series), Cap Screw; 7/8" X 6-1/2" 7/8" X 6-1/2", (Use With R33430, R33440, R48954 Or R48955), Cap Screw; (A: 92 mm Axle) (E: Use With R34680, R52160, Or R33450.) 7/8" X 6-1/2" 7/8" X 6-1/2", Cap Screw; 7/8" X 6-1/2", Cap Screw; 7/8", Cap Screw; 7/8" X 6-1/2" (Sub For R34829), Cap Screw; 7/8"X6-1/2" (Sub For R34829), Cap Screw; (A: With Wheel W16x34) 7/8" X 6-1/2", Cap Screw; 7/8" X 6-1/2" 7/8", (Sub For R34829), Cap Screw; 7/8" (Sub For R34829), Cap Screw; (B: Use With R34680, R48954, R48955, R52160 Or R70309) 7/8" X 6-1/2", Cap Screw; (A) 7/8" X 6-1/2" (Sub For R34829) | 2 |
| 08***86 | Cap Screw; (B) 7/8" X 7-1/2", Cap Screw; 7/8" X 7-1/2", (Use With R35300), Cap Screw; 7/8" X 7-1/2", Cap Screw; 7/8" X 7-1/2", (Use Without Truss Rods), Cap Screw; 7/8" X 7-1/2", (With Truss Rod), Cap Screw, Cap Screw; 7/8" X 7-1/2", (Sub For R45351), Cap Screw; 7/8" X 7-1/2" (Sub For R45351), Cap Screw; 7/8" X 7-1/2", (Use With R43530 Or R35300), Cap Screw; (B) 7/8" X 7-1/2", (Sub For R45351), Cap Screw; (C: Use With R35300, R36190, R49860, R61523, And R61726.) 7/8" X 7-1/2" 7/8" X 7-1/2", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 7/8" X 7-1/2" (24.5-32 Or 23.1-34 Tire), 7/8" X 7-1/2", Cap Screw; 7/8" X 7-1/2" (Use With R36190), Cap Screw; (Sub For R35334), Cap Screw; (C) 7/8" X 7-1/2", (Sub For R45351), Cap Screw; 7/8" X 7-1/2", (Sub For R35334), Cap Screw; (A: Australia) 7/8" X 7-1/2", Cap Screw; 7/8" X 7-1/2" 7/8" X 7-1/2", Cap Screw; 7/8" X 7-1/2" 7/8" X 7-1/2" (Use With R36190 Or R35300), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 7/8" X 7-1/2" 7/8" X 7-1/2", Cap Screw; (A: Australia) 7/8" X 7-1/2" (Sub For R45351), Cap Screw; (A) 7/8" X 7-1/2", (Sub For R45351) | 2 |
| 11***49 | Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2" | 1 |
Furrow Filler [A20]
John Deere : 1635 - Disk : Furrow Filler [A20]
| 03***16 | Bolt; 5/8" X 3-3/4" (Additional Weight To Weight), Bolt; 5/8"X3-3/4" (For R56920 Or R55312), Bolt; 5/8" X 3-3/4" (Additional Weights To Wheel), Bolt; 5/8" X 3-3/4", Bolt; 5/8" X 3-3/4", (Additional Weights To Wheel), Bolt; 5/8"X3-3/4", Bolt; 5/8" X 3-3/4" (For R56920, R55312), Bolt; (B: Additional Weights) 5/8" X 3-3/4", Bolt; 5/8" X 3-3/4", (Additional Weight To Weight), Bolt, Bolt; (B) 5/8" X 3-3/4", (Use With Extra Weights) | 1 |
| 03***28 | Bolt; (C) 5/8" X 1-1/2", Bolt; (B) 5/8" X 1-1/2", Bolt; 5/8" X 1-1/2", Bolt; (A) 5/8" X 1-1/2", Bolt; 5/8" X 1-1/2" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Bolt; 5/8" X 1-1/2" For Two Wheel Drive Tractors, Bolt; 5/8" X 1-1/2" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895) | 2 |
| 03***80 | Bolt; (A) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", Round Head, Bolt; 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", (Use With B31500), Bolt; (C) 5/8" X 2-1/2", Bolt; (B) (C) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2", (Use With Aa34357), Bolt; (B) 5/8" X 2-1/2", Bolt; 5/8" X 2-1/2" (A) | 2 |
Gang Bolts And Disks - Continued 3.5 M (11'7"), 4.0 M (13'3"), And 5.0 M 16'7") Sizes [A14]
John Deere : 1635 - Disk : Gang Bolts And Disks - Continued 3.5 M (11'7"), 4.0 M (13'3"), And 5.0 M 16'7") Sizes [A14]
| 24***28 | Washer, Washer; 1-17/32" X 2-1/2" X 0.120" (Sub (4) 24h1228), Washer; 1-17/32" X 2-1/2" X 0.120", Washer; 1-17/32"X2-1/2"X.120", Washer; 1-17/32" X 2-1/2" X 0.120", (Kits Ar69585 And Ar73922), Washer; 1-17/32" X 2-1/2" X 0.120", Kit Ar69585 And Ar73922, Washer; 1-17/32" X 2-1/2" X 0.120", (28, 31, 36 And 41-Foot), Washer; 1-17/32" X 2-1/2" X 0.120", (For 28 And 31 Foot Machines) | 4 |
| 24***40 | Washer; (A: Use With Net Wrap) 1-17/32" X 2-1/2" X 1/4", Washer; 1-17/32" X 2-1/2" X 1/4" Center Frame Only; (Three Used On Each Side), Washer; 1-17/32" X 2-1/2" X 1/4" Wing Frame Only; (One Used On Each Side), Washer; 1-17/32" X 2-1/2" X 1/4", Washer; 1-17/32" X 2-1/2" X 1/4" Sub (4) 24h1228, Washer; (D) 1-17/32" X 2-1/2" X 1/4", Washer; (E) 1-17/32" X 2-1/2" X 1/4", Washer; 1-17/32" X 2-1/2" X 1/4" (Use With Ae54311 And Ae52184), Washer; 1-17/32" X 2-1/2" X 1/4", (Use With Ae54311), Washer | 4 |
| A2***67 | Disk; (A) 561 X 6.5 mm (22" X .256") 1p Edge, (Solid Spherical Disk), Disk; (A), Disk; (A) (B) 561.300 X 6.500 mm (22.098" X 0.256"), No. 1p Edge, Disk; (A) 561.300 X 6.500 mm (22.098" X 0.256"), No. 1p Edge | 1 |
Gang Bolts And Disks 3.5 M (11'7"), 4.0 M (13'3"), And 5.0 M 16'7") Sizes [A12]
John Deere : 1635 - Disk : Gang Bolts And Disks 3.5 M (11'7"), 4.0 M (13'3"), And 5.0 M 16'7") Sizes [A12]
| A2***68 | Disk; (A) 558 X 6.5 mm (22" X .256") 10p Edge, (Solid Spherical Disk), Disk; (A) 558.800 X 6.500 mm (22" X 0.256"), No. 10p Edge | 1 |
| A3***69 | Disk; (A) | 1 |
| B2***11 | Disk; Cone, Plain, 24" X 0.256", Disk; (B: Cone) 24" X 0.250" (610mm X 635mm), Disk; (A) 609 X 6.5 mm (24" X .256") 10p Edge, (Solid Spherical Disk), Disk; (A: Cone) 24" (610mm) 0.256" (6.50mm), Disk; (F), Disk, Disk; Cone, Plain, 24" X 0.256" (610 X 6.500 mm) (Sub For K37324) | 1 |
Gang Frame, Standard And Scraper Bar 3.5 M (11'7"), 4.0 M (13'3"), And 5.0 M (16'7") Sizes [A10]
John Deere : 1635 - Disk : Gang Frame, Standard And Scraper Bar 3.5 M (11'7"), 4.0 M (13'3"), And 5.0 M (16'7") Sizes [A10]
| 03***56 | Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors) | 12 |
| 08***20 | Bolt; (A) 3/4" X 7" Top Only, Bolt; 3/4" X 7", Bolt; (A) 3/4" X 7", Bolt; (B) 3/4" X 7", Bolt; 3/4" X 7" (Use On Non-Tapered Spring), Bolt; (C) 3/4" X 7", Bolt; 3/4"X7", Bolt; 3/8"X7", Bolt; 3/4" X 7" L.H., Bolt; 3/4" X 7" (Used With Weight Bracket), Bolt; 3/4" X 7", (Used With Weight Bracket), Bolt; 3/4" X 7", Hex. Hd., Bolt; 3/4"X7" (Sub For L26801) | 28 |
| 08***47 | Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2" | 28 |
Hydraulic Cylinder ( -1982) 76.2 Mm Bore X 203.2 Mm Stroke (3" X 8") [A22]
John Deere : 1635 - Disk : Hydraulic Cylinder ( -1982) 76.2 Mm Bore X 203.2 Mm Stroke (3" X 8") [A22]
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 8 |
| 14***76 | Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-01***34; 4850-00***87) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-32***15; 4850-32***46) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-00***51; 4255-00***13; 4455-00***27) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-00***19; 8650-00***98) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-01***03;4955-01***24) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-00***87; 4255-00***81; 4455-01***58) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-00***31; 4250-00***42; 4450-02***66) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -32***23 (5310) -33***88) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -32***21 (5310) -33***91) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 32***24- (5310) 33***89-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8 | 1 |
| PT***82 | Hydraulic Cylinder K; (Sub For Ty7189)Includes Parts Marked (A), Hydraulic Cylinder K; (A) (C) (Sub For Ty7189), Hydraulic Cylinder K; (Sub For Ty7189) Repair, Hydraulic Cylinder K; (Sub For Ty7189), Hydraulic Cylinder K, Hydraulic Cylinder K; 1-1/8" Or 1-1/4" Diameter Rod, Hydraulic Cylinder K; For 1-1/8" And 1-1/4" Dia. Rod, Hydraulic Cylinder K; (For 3 X 8" Cylinder With 1-1/8" Or 1-1/4" Dia. Rod) Consists Of: (3) A4728r Packings, (2) Ty7054 Backup Washers,Ty7058 O-Ring, A3606r O-Ring, Ty7071 Rod Wiper, Ty7072 Rod Wiper And Ty7211 Backup Washer, Hydraulic Cylinder K; (Sub For Ty7189) Includes Parts Marked (A), Hydraulic Cylinder K; (For Dc38476), Hydraulic Cylinder K; Seal (Includes Parts Marked (A)) (Sub For Ty7189), Hydraulic Cylinder K; (Sub Aw32039, This Application), Hydraulic Cylinder K; Includes Parts Marked (A) | 1 |
Hydraulic Cylinder (Cessna - "Wyr-Loc") (1982- ) 76.2 Mm Bore X 203.2 Mm Stroke (3" X 8") (All Sizes) [A23]
John Deere : 1635 - Disk : Hydraulic Cylinder (Cessna - "Wyr-Loc") (1982- ) 76.2 Mm Bore X 203.2 Mm Stroke (3" X 8") (All Sizes) [A23]
| 11***71 | Cotter Pin; 8 X 50 mm, Cotter Pin; X, Cotter Pin; 8 X 40 mm, Cotter Pin; (A) 8 X 40 mm, Cotter Pin, Cotter Pin; 8 X 40 mm (Use With A32475), Cotter Pin; 0.315" X 1.575", Cotter Pin; 8x40mm, Cotter Pin; 8 X 40 mm, (Use With A32475), Cotter Pin; 8 X 40 mm, (Sub 11m7041), Cotter Pin; 8 X 40 mm (0.315" X 1.575"), Cotter Pin; 8 X 40 mm, (Category 1 Hitch), Cotter Pin; 8 X 40 mm (Use With A32475 Or N134600) | 4 |
| A3***75 | Pin Fastener; 25.500 X 106 mm, (Sub N134600), Pin Fastener; (Sub N134600), Pin Fastener; (Use With 11m7071), Pin Fastener; 25.500 X 106 mm (1.004" X 4.173"), Pin Fastener, Pin Fastener; 25.500 X 106 mm (1.004" X 4.173") (Sub N134600) | 2 |
| A4***66 | End; (B: Items Included In Ae42001), End; Rear, End, End; (Use With An240670), End; (B) | 1 |
Hydraulic Cylinder, Hoses And Fittings [A21]
John Deere : 1635 - Disk : Hydraulic Cylinder, Hoses And Fittings [A21]
| A2***03 | Clevis; 230 mm (9"), Clevis; Main Frame Only, Clevis, Clevis; (Sub An240503) | 2 |
| A3***1R | Part Missing In Wise; (B), Part Missing In Wise; 1/8" Standard, Part Missing In Wise; Use With 1.83 M (6'), Part Missing In Wise; (Sub For 34h321), Part Missing In Wise; Use With 2.13 M (7'), Part Missing In Wise; (Sub A15146), Part Missing In Wise; (A: Category Ii), Part Missing In Wise; Plow Bolt, Part Missing In Wise; (Sub B15648), Part Missing In Wise; (Sub For Et11510), Part Missing In Wise; (Sub K40006), Part Missing In Wise; (Hydrostatic Drive), Part Missing In Wise; 17 mm X 121 mm, Part Missing In Wise; No. 10, Part Missing In Wise; (Use With Mt970), Part Missing In Wise; X, Part Missing In Wise; Spring Locking, Part Missing In Wise; Less Germany, Part Missing In Wise; (Sub For N2023m) (This Application Only), Part Missing In Wise, Part Missing In Wise; (Sub For L18955), Part Missing In Wise; Lock, Part Missing In Wise; (Sub B15646), Part Missing In Wise; (7' Hay Pickup), Part Missing In Wise; 30 Ft. And 25 Ft., Part Missing In Wise; (Pkg. Of 25), Part Missing In Wise; (To Hold Pt13386 Screw), Part Missing In Wise; (Sub For B15648, This Application), Part Missing In Wise; (Sub For Ty7014), Part Missing In Wise; Use With 1.68 M (5.5'), Part Missing In Wise; (Use With At336208), Part Missing In Wise; (Sub For 99m7085 Appl), Part Missing In Wise; (Category 2 Hitch), Part Missing In Wise; (Sub For J16931), Part Missing In Wise; .148" Dia. (Use With N11963), Part Missing In Wise; (Sub For Et11175), Part Missing In Wise; (Sub For Aa21292, This Application), Part Missing In Wise; 3/16", Part Missing In Wise; (Sub For Ce13819), Part Missing In Wise; (A), Part Missing In Wise; (Sub For Pt9194), Part Missing In Wise; (Use With Straight Drawbar), Part Missing In Wise; Use A3581r Or 11m7038, Part Missing In Wise; Cat I, Part Missing In Wise; (A: Used With Optional Double Twine Arm.), Part Missing In Wise; (B) (C), Part Missing In Wise; (Sub For F2830r), Part Missing In Wise; Use A3581r Or 11m7056 | 2 |
| AA***74 | Stop; (Sub For Aa28752) 38 mm (1-1/2"), Stop; (Sub Aa33111) 38 mm (1-1/12"), Stop; (Sub Aa28752) 40 mm (1-1/2"), Stop; (Sub Aa33111) 38 mm (1-1/2"), Stop; (Sub Aa33111), Stop; (Sub For Aa28752) (Sub Aa33111) 38 mm (1-1/2"), Stop; 38 mm (1-1/2") | 1 |
Jack [A24]
John Deere : 1635 - Disk : Jack [A24]
| AA***55 | Jack, Jack; (Illustrated) See Grid G13 | 1 |
| AA***92 | Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00***26; 7700-00***20; 7800-01***50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650 | 1 |
| AA***70 | Handle; (A: Knob Type), Handle; (A), Handle; For Jack With Green Knob, Handle, Handle; For Jack With Green Knob., Handle; Knob Type, Handle; Green, Handle; For Jack With Green Handle, Handle; (Sleeve Type), Handle; (Knob Type), Handle; (Sub For Aa27831), Grey Knob, Handle; (Sub Pt18656), Handle; (Knob Type) (Sub Pt18656) | 1 |
Labels [B05]
John Deere : 1635 - Disk : Labels [B05]
| A2***29 | Label; (Sub Aa32090) "Model Designation" Right And Left Rear Side Of Main Frame, Label; (Sub Aa32090) "Designation Model Kit" 50 mm (2") - Located On Outside Of Long Frame Tube And One On Outside Of Short Frame Tube, Label; (Sub Aa32090) "Designation Model Kit" 50 mm (2") Located On Outside Of Long Frame Tube And On Outside Of Short Frame Tube, Label; (Sub Aa32090) "Model Designation" - Located On Rear Cross Tube, Label; (Sub Aa32090) "Designation Model Kit" - Located On Outside Of Each Wing (This Application Only), Label; Model Designation Kit, Label; (Sub Aa32090) Kit, Model Designation, 51 mm (2") - Centered On Right Side Of Truss Tube Over Front Bottom, Label; (Sub Aa32090) Kit, Model Designation, Outside And Front Of Truss Tube, Label; (Sub Aa32090) "Model Designation" 51 mm (2"), Label; (Sub Aa32090) "Model Designation" 50 mm (2") Centered On Right Side Of Truss Tube Between Front Two Bottoms, Label; (Sub Aa32090) Kit, Model Designation, Left And Right Sides Of Main Frame, 50 mm (2"), Label; (Sub Aa32090) "Model Designation" - Located On R.H. End And Rear Of Tube, Label; (Sub Aa32090) "Designation Model Kit" - Located On Outside Of Each Side Tube And On Front Of Upper Cross Link, Label; (Sub Aa32090) "Model Designation" - Located On Rear Of Main Frame And Outside Of Each Narrow Wing; On Outside Of Each Wide Wing, Label; "Model Designation Kit" - Located On Each Side Pf Main Frame 65 mm (2.5"), Label; (Sub Aa32090) Model Designation, Label; (Sub Aa32090) Kit, Model Designation, 150 mm (6") Located On Right Side And Rear Of Truss Tube | 1 |
| A4***68 | Sign; (Sub Aa32090) "Model Designation" Located On Right Side Of Hitch Tube | 1 |
| AA***90 | Sign; "Model Designation" Located On Rear Cross Tube., Sign; "Model Designation Kit" 75mm, Sign; "Model Designation" Located On Right Side Of Hitch Tube, Sign; "Model Designation" 50 mm, Sign; "Model Designation" Centered On Right Side Of Truss Between Front Two Bottoms, Sign; "Designation Model Kit" Located On Outside Of Long Frame Tube And On Outside Of Short Frame Tube, Sign; "Model Designation" - Located On R.H. End And Rear Of Tube, Sign; "Model Designation" On Outside Of Long Frame., Sign, Sign; "Model Designation Kit" - Located On Each Side Of Main Frame, Sign; "Model Designation" Located On Right And Left Side Of Main Frame., Sign; "Model Designation Kit" - Located On Outside Of Each Wing, Sign; "Model Designation" - Located On Rear Of Main Frame And Outside Of Each Narrow Wing; On Outside Of Each Wide Wing, Sign; "910" - Located On R.H. Mast Plate, Sign; "Model Designation" Right And Left Rear Side Of Main Frame., Sign; "Model Designation" Kit, Outside And Front Of Truss Tube, Sign; Kit, Model Designation, Located On Right Side And Rear Of Truss Tube. | 1 |
Main Frame [A08]
John Deere : 1635 - Disk : Main Frame [A08]
| 03***80 | Bolt; (D), Bolt; (B) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 1-1/4" (Sub For 03h1505), Bolt; (A) 3/8" X 1-1/4", Bolt; (E), Bolt; 3/8" X 1-1/4" L.H. Side (Use With 14h812), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 1-1/4" (With Skid Plates), Bolt; X 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4", For 8n, Bolt; 3/8" X 1-1/4" (21 Used, 18'; 23 Used, 20'), Bolt; 3/8"X1-1/4", Bolt; (B: 24 And 224 Balers) 3/8" X 1-1/4", Bolt; (C) 3/8" X 1-1/4", Bolt; (A) (B) (C) (D) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/2", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; (A) (B) (C) 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", Use With Furrower; For 8- And 12-Row, Bolt; 3/8" X 1-1/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 1-1/4", (4 Used On Diesel Tractor Only), Bolt; 3/8" X 1-1/4" (Sub For 10h1027), Bolt; 9.525 X 31.750 mm (3/8" X 1-1/4"), Bolt; 3/8" X 1-1/4", (A), Bolt | 4 |
| 08***59 | Bolt; (B) 1" X 8-1/2", Bolt; 1" X 8-1/2" | 6 |
| 08***47 | Bolt; 3/4" X 6-1/2", Bolt; (A) 3/4" X 6-1/2", Bolt; (E) 3/4" X 6-1/2", Bolt; (C) 3/4" X 6-1/2", Bolt; (B) 3/4" X 6-1/2", Bolt; (A) (B) 3/4" X 6-1/2", Bolt; (D) 3/4" X 6-1/2", Bolt; (C) (D) 3/4" X 6-1/2", Bolt; (F) 3/4" X 6-1/2", Bolt; 3/4" X 6-1/2", Assemble From Bottom Up, Bolt; 3/4" X 6-1/2" (Sub For 08h4536), Bolt; (B) (C) 3/4" X 6-1/2", Bolt; (B) (C) (D) 3/4" X 6-1/2" | 12 |
Middlebreaker [A17]
John Deere : 1635 - Disk : Middlebreaker [A17]
| 10***13 | Bolt; 7/16" X 2-1/4" | 2 |
| 12***93 | U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16" | 2 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 2 |
Middlebreaker, Spring-Loaded Disk [A18]
John Deere : 1635 - Disk : Middlebreaker, Spring-Loaded Disk [A18]
| 11***16 | Cotter Pin; 3/16" X 1", For 6-Row, Cotter Pin; 3/16" X 1", Cotter Pin; 3/16" X 1" 3/16" X 1", Cotter Pin, Cotter Pin; 3/16" X 1", (Sub R32507), Cotter Pin; 3/16" X 1", For 40-Tooth Section, Cotter Pin; 3/16" X 1", (Sub For A18135) For 4 Section, Cotter Pin; 3/16 X 1", Cotter Pin; (A) 3/16" X 1", Cotter Pin; (D) 3/16" X 1", Cotter Pin; 3/16" X 1", For Heavy Duty Scrapers, Cotter Pin; 3/16" X 1", (Sub For A18135) For 5 Section, Cotter Pin; 3/16" X 1", (Sub For Mg87397), Cotter Pin; (B) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Sections, Cotter Pin; 3/16" X 1", For 40-Tooth Sections, Cotter Pin; (B) (C) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Section, Cotter Pin; 3/16" X 1", Extension Only, Cotter Pin; 3/16" X 1-1/2" (Sub For 11h218), Cotter Pin; 3/16" X 1", For 4w, 6n, 6w, Cotter Pin; 3/16"X1", Cotter Pin; 3/16"X3/4", Cotter Pin; 3/16"X3/8", Cotter Pin; 3/16" X 1", (4884, 4684, 5184, 5186) | 2 |
| 11***18 | Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel) | 2 |
| 11***55 | Cotter Pin; 5/16" X 2", Use A3581r Or 11h255 (Sub 11m7056), Cotter Pin; (A: For 4 And 5 Bottoms Plow) 5/16" X 2", Cotter Pin, Cotter Pin; 5/16" X 2", (Included With Cylinder), Cotter Pin; 5/16" X 2", Cotter Pin; (B) 5/16" X 2", Cotter Pin; 5/16" X 2", (Sub For 11m7056), Cotter Pin; 5/16" X 2" (Included With Cylinder), Cotter Pin; 7.925 X 50.800 mm (5/16" X 2") | 2 |
Reflector And Reflector Bracket (1985- ) [B01]
John Deere : 1635 - Disk : Reflector And Reflector Bracket (1985- ) [B01]
| AA***31 | Bracket; Reflector Assembly, Bracket, Bracket; 3/4" X 2" Cap Screw 19h1768 Used To Attach To Outer Frame Plate Of 9-Standard Aa27789 Frame, Bracket; 3/4" X 4-1/2" Cap Screw 19h2084 Used To Attach To Outer Frame Plate Of 9-Standard Aa33228 Frame, Bracket; Reflector Assembly, (Sub An250166), Bracket; 3/4" X 4-1/2" Cap Screw 19h2084 Used To Attach To Outer Frame Plate Of 9-Standard Aa33228 Frame Or 3/4" X 3-1/2" Cap Screw 19h1735 Used To Attach To Outside Rear Standard Caps A31673 To Scraper A50454 On 4.6 M (15'2") Heavy Duty | 1 |
| JD***81 | Reflector; "Amber Reflective Marker" Center Vertically On Tube. For 6-, 7- And 8-Btm. On-Land Plows, Reflector; (B), Reflector; 2" X 6.3" Amber, Located On Left And Right Main Frame, Reflector; 2" X 6.3" Amber, Reflector; "Amber Reflective Marker" Center Vertically On Tube, For 8-Btm. And All Tandem Set-Up., Reflector; "Amber Reflective Tape" - On Rear Of Cart, Reflector, Reflector; "Amber Reflective Tape" Centered Vertically On Main Frame Tube, For 9-, 10- And 12-Btms., Reflector; Amber, Front, Reflector; "Amber" - Located On Front Ends Of Toolbar, Reflector; Amber, Reflector; (Amber) (L.H. Side), Reflector; "Amber Reflective Tape" - Located On Top Of Folding Auger And L.H. Front Of Tank, Reflector; Amber 2 X 6.3", Reflector; Amber (Located On Each End Of Lean Bar), Reflector; (312), Reflector; 2" X 6.3" Amber, Located On Front Hinge, Reflector; Amber, (Sub For Ga10405), Reflector; Amber, (Sub For Jd200), Reflector; Amder 2" X 6.3", Reflector; (Amber), Reflector; (Amber) 2" X 6.3", Reflector; "Amber Reflective Marker" Centered Vertically On Main Frame Tube, For 14- And 16-Btms., Reflector; (Sub For Jd200), Reflector; Amber (Not Ilustrated), Reflector; Amber, 2" X 6.3", Reflector; (Sub Jd5905) Amber | 1 |
| JD***78 | Reflector; (Red), Reflector; Red 2" X 6.3", Reflector; Red, (Sub For Jd135), Reflector, Reflector; (A) (A) Red (Not Ilustrated), Reflector; (Sub Jd5901) Red, Reflector; "Red Reflective Tape" - Located On Each Side Of Lift Assist Wheel, Reflector; Red, (Sub For Jd134), Reflector; "Red Reflective Tape" - On Front And Rear Of Cart, Reflector; 2" X 8" Red, Reflector; Red, 2" X 6.3", Reflector; "Reflective Tape, Red" - For Rear Of Box Extension, Reflector; (Red) 2" X 6.3", Reflector; 2" X 6.3" Red, Located On Rear Hinge, Reflector; (A)Red (Not Ilustrated), Reflector; (Sub For Ga10404) Red, Reflector; Red 2 X 6.3", Reflector; Red, Reflector; Red (Not Ilustrated), Reflector; (Sub Jd5901) Red - Located On Rear Ends Of Main Frame When Markers Are Not Used, Reflector; Red, 2" X 8", Reflector; Red (L.H.), Reflector; 2" X 6.3" Red, Reflector; R.H., Reflector; "Red" - Located On Rear Of Seed Hopper Or Insecticide Hopper, Reflector; "Reflective Tape, Red" - For Rear Box Extension, Reflector; Red (Located On L.H. And R.H. Back Side), Reflector; Red, (Sub For Jd135, Jd129 And Jd5579), Reflector; (Red) (2" X 8"), Reflector; Red, (Sub For Jd137) | 1 |
Reflectors And Bracket ( -1985) [A25]
John Deere : 1635 - Disk : Reflectors And Bracket ( -1985) [A25]
| 14***78 | Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 10 | 4 |
| 21***48 | Screw; 0.190" X 3/4", (Use With Pt9543 Bracket), Screw; 0.190" X 3/4", Red And Amber, Screw; 0.190" X 3/4", Screw; 0.190" X 3/4", Use With Amber And Red Reflectors, Screw; 0.190" X 3/4", Use With Amber And Red Reflector, Screw; 0.190" X 3/4" (A), Screw; Red And Amber, Screw; (A) 0.190" X 3/4", Screw; 0.190" X 3/4", Canada Only, Screw; 4.826 X 19.050 mm, Screw; 4.826 X 19.050 mm (0.190" X 3/4") | 2 |
| 21***01 | Screw; 0.190" X 1/2", Use With One Reflector, Screw; 0.190" X 1/2" Power Take-Off Assembly, Screw; 0.190" X 1/2", (Sub For Mg84821), Screw; No.10 X 1/2", Screw, Screw; 0.190" X 1/2", (Use With Stf2384), Screw; (A) 0.190" X 1/2", Screw; No.10, Screw; 0.190" X 1/2", Screw; 0.190" X 1/2" 1/2", Screw; 0.190" X 1/2" Pan Head, Screw; Mach., No. 10 X 1/2", Screw; Nr 10 X 1/2", Screw; (A), Screw; 0.190" X 1/2", Screw; (B) 0.190" X 1/2", Screw; 0.190" X 1/2", (Use With Pt9543 Bracket), Screw; No. 10 X 1/2", Screw; No.10x1/2", Screw; 0.190" X 1/2", (Sub For B15548), Screw; 0.190" X 1/2" (Sub For 21h1019), Screw; (Sub For B15548), Screw; Pan Head, No. 10 X 1/2", Screw; 0.190" X 1/2" (Use With 14h778), Screw; 0.190" X 1/2", Control Lever, Screw; No 10 X 1/2", Screw; Pan Hd., No. 10 X 1/2" | 2 |
Scrapers 3.5 M (11'7"), 4.0 M (13'3"), And 5.0 M (16'7") Sizes [A16]
John Deere : 1635 - Disk : Scrapers 3.5 M (11'7"), 4.0 M (13'3"), And 5.0 M (16'7") Sizes [A16]
| 03***28 | Bolt; (C) 5/8" X 1-1/2", Bolt; (B) 5/8" X 1-1/2", Bolt; 5/8" X 1-1/2", Bolt; (A) 5/8" X 1-1/2", Bolt; 5/8" X 1-1/2" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Bolt; 5/8" X 1-1/2" For Two Wheel Drive Tractors, Bolt; 5/8" X 1-1/2" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895) | 32 |
| 03***56 | Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors) | 64 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 96 |
Smv (Slow Moving Vehicle) Emblem And Bracket [B04]
John Deere : 1635 - Disk : Smv (Slow Moving Vehicle) Emblem And Bracket [B04]
| 14***86 | Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-70***00) 9550sh (-70***00)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-70***00) & 9750sts (-70***00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4" | 2 |
| 21***02 | Screw; 1/4" X 5/8" (Use With 14h786), Screw; 1/4"X5/8", Screw; 1/4" X 5/8", Screw; 1/4" X 5/8", Use With Endwise Transport | 2 |
| A1***62 | Bracket; (B), Bracket; Wide Frame, Sleeve; - Spool, Forward & Reverse, A16664 Selector Valve Assembly Used Transmission Serial No., Serial Range: 18213-23079, Bracket | 1 |
Spindle, Hub And Wheel [B02]
John Deere : 1635 - Disk : Spindle, Hub And Wheel [B02]
| 19***28 | Cap Screw; (A: ( -Xxxxxx) Serial No. 4050-00***31; 4250-00***42; 4450-02***66) 3/8" X 3", Cap Screw; 3/8" X 3", (Also Order R49816, R49819, 34h251, 34h252, 34h297 And 34h299 Unless Previously Installed), Cap Screw; (A) 3/8" X 3", Cap Screw; (B) 3/8" X 3", Cap Screw; 3/8" X 3", (Use With T11234), Cap Screw; 3/8" X 3", (14 X 7 Disk And Hoe), Cap Screw; 3/8" X 3", Codes 2101 And 2103, Cap Screw; 3/8"X3", Cap Screw; 3/8" X 3", (Delco-Remy), Cap Screw; Code 2107 And 2108, Cap Screw; 3/8" X 3", (Sub 19h2458), Cap Screw; 3/8" X 3", (Delco Remy), Cap Screw; 3/8" X 3" (For R66794), Cap Screw; 3/8" X 3", (Dh-03, Gh-01), Cap Screw, Cap Screw; 3/8" X 3", (Use With A24646 Or A24647 And A24651) (Shear), Cap Screw; 3/8" X 3", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8" X 3", (Use With Aa20993 And Aa20994) (Cessna Cylinders Only), Cap Screw; 9.525 X 76.200 mm, Cap Screw; 3/8" X 3" (11'5" - 15'0"), Cap Screw; 3/8" X 3" (Sub 19h2228), Cap Screw; 3/8" X 3" (Spike-Tooth Cylinder), Cap Screw; 3/8" X 3", (4 Used, Variable Drive; 6 Used, Long), Cap Screw; (A: ( -Xxxxxx) 4050-00***43 (Qrt)) 3/8" X 3", Cap Screw; 3/8" X 3", (Spike-Tooth Cylinder), Cap Screw; 3/8" X 3", 1350, Cap Screw; 3/8" X 3" (Use With 14h812), Cap Screw; 9.525 X 76.200 mm (3/8" X 3") (Used With Code 1316), Cap Screw; Code 2802 And 6499, Cap Screw; 3/8" X 3" 3/8" X 3", Cap Screw; 3/8" X 3", Code 2101 And 2103, Cap Screw; (A) 3/8"X3", Cap Screw; 3/8" X 3", Shear Bolt, Cap Screw; 3/8" X 3" (Hs, Sae 8), Cap Screw; 3/8" X 3", Upper, Cap Screw; 3/8" X 3" (For R60827), Cap Screw; 3/8" X 3" (Use With Delco-Remy), Cap Screw; 3/8"X3" (For R66794), Cap Screw; 3/8" X 3", 2350, Cap Screw; 3/8" X 3", Cap Screw; 3/8" X 3", (Use With Aa20993 And Aa20994) For Cessna Cylinders Only, Cap Screw; (C) 3/8" X 3", Cap Screw; 3/8" X 3" (Qrt) (Nlr), Cap Screw; 3/8" X 3", For 509b And 510b, Cap Screw; (A: Quad-Range Transmission) 3/8" X 3", Cap Screw; 3/8" X 3", (Use With R78123), Cap Screw; 3/8"X2-1/8", Cap Screw; (B: Quad-Range Transmission) (E: ( -Xxxxxx) 4050-00***43 (Qrt)) 3/8" X 3", Cap Screw; 3/8" X 3", (8 Used For 714, 714a; 10 Used For 716, 716a), Cap Screw; 3/8" X 3" (Use With R78123), Cap Screw; 3/8"X3" (For R60827) | 1 |
| 24***56 | Washer; 1-1/32" X 2" X 0.194", (Sub 24h1138), Washer; 1-1/32" X 2" X 0.194", Washer; 1-1/32" X 2" X 0.194", (Sub For Na1628) | 1 |
| 28***13 | Spacer; 1-1/2" X 1.900" X 2", Spacer, Spacer; 1-1/2" X 2" | 1 |
Wheel Frame [B03]
John Deere : 1635 - Disk : Wheel Frame [B03]
Need a specific 1635 - DISK part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.
Post a parts request and compare supplier quotes.