John Deeredrill, grain(no series)

John Deere 1520 - DRILL, GRAIN

Specifications · OEM parts breakdown

Search live 1520 - DRILL, GRAIN partsSource or supply its parts

Post a parts request and compare supplier quotes.

John Deere 1520 - DRILL, GRAIN specifications

Engine

Cylinders3
Displacement2702 cc (164.9 cu in.)
Bore10.21 cm (4.02 in.)
Stroke11.00 cm (4.33 in.)
Compression Ratio8.0:1

Dimensions

Wheelbase187.0 cm (73.6 in.)

Performance

Rear PTO Speed540 RPM

Service capacities (summary)

Fuel Tank Capacity73.8 l (19.5 gal)
Coolant Capacity11.4 l (3.0 gal)
Hydraulic Capacity37.9 l (10.0 gal)

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

1520 - DRILL, GRAIN common service parts

Part numberPart
N167649ScrewCheck fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

All 1520 - DRILL, GRAIN assemblies by section

Every catalogued assembly group for the John Deere 1520 - DRILL, GRAIN. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Drives
John Deere : 1520 - Drill, Grain : Drives : Acre Meter And Bracket
12***33Washer; (Sub For 43***40), Washer; (A: 5104(00***01- ), 5204 ( -00***26), 5038d(00***01- ).) 1/8", Washer; No. 5, Washer; 1/8", Washer, Washer; No.5, Washer; (C: 5303 (Xxxxxx- 00***00), 5403 (Xxxxxx- 00***32), 5503 (Xxxxxx- Xxxxxx)) 1/8", Washer; 3.175 mm, Washer; (D: Also Includes Sn:) 1/8", Washer; (A: Except Sn - 5320n: 33***13) 1/8", Washer; 1/8" (Sub For 12m7048), Washer; (A: Collarshift Transmission) 1/8", Washer; 1/8" (Sub For A590903), Washer; 1/8" (Use With R56026)5
14***02Nut; No 5, Nut; 1/8", Nut; No.54
21***86Screw; (A) (B) 1/8" X 7/16", Screw; 1/8" X 7/16"4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Agitator Shaft And Gears
03***74Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.2
11***24Cotter Pin; 1/8" X 1-1/4" (Sub 11m7017), Cotter Pin, Cotter Pin; 1/8" X 1-1/4", Cotter Pin; 1/8" X 1-1/4" (Sub 11m7017) (Sub H99923, This Application), Cotter Pin; 1/8" X 2"5
24***48Washer; (A) 1-1/32" X 1-1/2" X 0.120", Washer; 1-1/32" X 1-1/2" X 0.120" (A), Washer; 1-1/32" X 1-1/2" X 0.120", Washer; 26.187 X 38.100 X 3.048 mm, Washer; 1-1/32" X 1-1/2" X 0.120" (D), Washer, Washer; 1-1/32" X 1-1/2" X 0.120" (Sub For Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", (700), Washer; (A: For 9650 ( -70***00) & 9750 ( -70***00)) 1-1/32" X 1-1/2" X 0.120", Washer; (Sub For (2) Mg272487), Washer; (Use With M150249 And M79152), Washer; 1-1/32" X 1-1/2" X 0.120" (Sub For (2) Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", 28 Ft, Washer; (A: Note; 9550 (70***01- ) 9550sh (70***01- )) 1-1/32" X 1-1/2" X 0.120", Washer; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1-1/32" X 1-1/2" X 0.120", Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1-1/32" X 1-1/2" X 0.120", Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For Et10714), Washer; 1-1/32" X 1-1/2" X 0.120", (750), Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For (2) Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120" (With 1" Pin), Washer; (A) 1-1/32" X 1-1/2" X 0.120" (K1) 35mm X 2.4mm (1.4" O.D. X .093" Thick) (Sub For (2) Mg272487)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Drive Line Assembly - 4.6 M (15 Ft.) Left-Hand Side ( - 1997)
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)4
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)2
12***01Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Drive Line Assembly - 4.6 M (15 Ft.) Left-Hand Side (1998 - )
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)6
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)1
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Drive Line Assembly - 4.6 M (15 Ft.) Right-Hand Side ( - 1997)
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)4
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)2
12***33Washer; (Sub For 43***40), Washer; (A: 5104(00***01- ), 5204 ( -00***26), 5038d(00***01- ).) 1/8", Washer; No. 5, Washer; 1/8", Washer, Washer; No.5, Washer; (C: 5303 (Xxxxxx- 00***00), 5403 (Xxxxxx- 00***32), 5503 (Xxxxxx- Xxxxxx)) 1/8", Washer; 3.175 mm, Washer; (D: Also Includes Sn:) 1/8", Washer; (A: Except Sn - 5320n: 33***13) 1/8", Washer; 1/8" (Sub For 12m7048), Washer; (A: Collarshift Transmission) 1/8", Washer; 1/8" (Sub For A590903), Washer; 1/8" (Use With R56026)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Drive Line Assembly - 4.6 M (15 Ft.) Right-Hand Side (1998 - )
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)6
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)1
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Drive Line Assembly - 6.1 M (20 Ft.) Left-Hand Side ( - 1997)
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)0
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)2
12***33Washer; (Sub For 43***40), Washer; (A: 5104(00***01- ), 5204 ( -00***26), 5038d(00***01- ).) 1/8", Washer; No. 5, Washer; 1/8", Washer, Washer; No.5, Washer; (C: 5303 (Xxxxxx- 00***00), 5403 (Xxxxxx- 00***32), 5503 (Xxxxxx- Xxxxxx)) 1/8", Washer; 3.175 mm, Washer; (D: Also Includes Sn:) 1/8", Washer; (A: Except Sn - 5320n: 33***13) 1/8", Washer; 1/8" (Sub For 12m7048), Washer; (A: Collarshift Transmission) 1/8", Washer; 1/8" (Sub For A590903), Washer; 1/8" (Use With R56026)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Drive Line Assembly - 6.1 M (20 Ft.) Left-Hand Side (1998 - )
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)0
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)1
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Drive Line Assembly - 6.1 M (20 Ft.) Right-Hand Side ( - 1997)
11***11Cotter Pin; 1/8" X 1" (Sub For 11h236), Cotter Pin; (A), Cotter Pin; 1/8" X 3/4", 2510, 3010, 3020, 4010, Or 4020 Tractors, Cotter Pin; 1/8"X3/4", Cotter Pin; 1/8" X 3/4", Heavy-Duty Scraper Attachments, Cotter Pin; 1/8" X 3/4", 4020 Or 4010 Tractor, Cotter Pin; 1/8"X5/8" (Sub For 11h38), Cotter Pin; 1/8"X1/4", Cotter Pin; (C) 1/8"X3/4", Cotter Pin; 1/8"X5/8", Cotter Pin; 1/8" X 3/4", (Stainless Steel), Cotter Pin; (C) 1/8" X 3/4", Cotter Pin; 1/8"X 3/4", Cotter Pin; 1/8" X 3/4", Heavy-Duty Scraper Attachment, Cotter Pin; 1/8" X 3/4", (Optional), Cotter Pin; 1/8" X 3/4", 4010 Or 4020 Tractor, Cotter Pin; 1/8" X 3/4", For Heavy-Duty Scraper Attachments, Cotter Pin; (B) 1/8" X 3/4", Cotter Pin; (A) (D) 1/8" X 3/4", Cotter Pin; (D) 1/8" X 3/4", Cotter Pin; (A) 1/8" X 3/4", Cotter Pin; 1/8" X 3/4", (Sub 11m1383), Cotter Pin; 1/8" X 3/4" (Stainless Steel), Cotter Pin, Cotter Pin; 1/8" X 3/4", Cotter Pin; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 1/8" X 3/4", Cotter Pin; 1/8" X 3/4" (Sub 11m1383), Cotter Pin; 1/8" X 3/4" (Sub 11m1383) (Stainless Steel), Cotter Pin; (Sub 11m1383), Cotter Pin; 1/8" X 3/4", Tire Skip Spacing1
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)2
14***09Nut; 1/2" (2 Used, Non-Adj Airfoil;4 Used, Adj), Nut; 1/2", Nut; 1/2" (Nla), Nut; 1/2", (Into Header With Keyed Hub), Nut; X 3/8", Nut; X X 1/2", Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Nut; 1/2" (Non-Adj Airfoil), Nut, Nut; 1/2" Quantity (2) Into Header With Keyed Hub, Nut; 1/2" Nla, Nut; 1/2", (Use With Aa58404), Nut; (B: For Msl) 1/2", Nut; 1/2", (Sub For Mg280431), Nut; (B: For 390 Offset Mower) 1/2" 305mm (12''), Nut; 1/2" (A), Nut; 3/8", Nut; X 1/2", Nut; 1/2" :, Nut; 1/2", Ar, Nut; 1/2", Rh, Nut; (A) 1/2", Nut; 1/2" (154"), Nut; 12.700 mm, (Sub For Ffsb109315), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Nut; (D) 1/2", (Sub For Mg280431), Nut; 1/2" (Use With H109640), Nut; X 1/2", Nut; (B) (C) M12,7, Nut; 1/2", (Nla), Nut; 1/2" (Adj Chaffers), Nut; 1/2" (Into Header With Keyed Hub), Nut; (B) 1/2" W/O 11, Nut, Nut; 1/2" Lh Strap, Nut; 1/2" (4-Used, Adj; 2-Used, Non-Adj Airfoil), Nut; (A) (B) 1/2", Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Nut; 1/2", (154"), Nut; 5/8", Nut; 0,5", Nut; 1/2", (540rpm), Nut; 1/2", (Ty2036) (Sub 14h1040), Nut; 1/2", Use 12 For 1850mm; 18 For 2150mm, Nut; (B: For Msl) (C: For Nsl) 1/2", Nut; Rh, 1/2", Nut; 12.700 mm, Nut; 1/2" (Sub For Pt19060), Nut; 12.700 mm (1/2"), Nut; 1/2" (2 Used, Non-Adj Airfoil; 4 Used, Adj), Nut; 1/2" (Sub 14h1040), Nut; 1/2", (Sub 14h1040), Nut; (B) (C) 0,5", Nut; (C) 1/2", Nut; 1/2", (Sub For Ffsb109315), Nut; X 1/2", Nut; (Sub For Pt19060), Nut; (B) 0,5", Nut; (A: Mg803115 Light Kit) 1/2", Nut; (B) 1/2", Nut; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/2", Nut; 1/2", (Sub R66288, R66289, (4) 03h1598, (4) 03h1731, (8) 12h301 And (8) 14h1040), Nut; (B) M12,7, Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2", Nut; 1/21
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Drive Line Assembly - 6.1 M (20 Ft.) Right-Hand Side (1998 - )
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)8
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)1
11***11Cotter Pin; 1/8" X 1" (Sub For 11h236), Cotter Pin; (A), Cotter Pin; 1/8" X 3/4", 2510, 3010, 3020, 4010, Or 4020 Tractors, Cotter Pin; 1/8"X3/4", Cotter Pin; 1/8" X 3/4", Heavy-Duty Scraper Attachments, Cotter Pin; 1/8" X 3/4", 4020 Or 4010 Tractor, Cotter Pin; 1/8"X5/8" (Sub For 11h38), Cotter Pin; 1/8"X1/4", Cotter Pin; (C) 1/8"X3/4", Cotter Pin; 1/8"X5/8", Cotter Pin; 1/8" X 3/4", (Stainless Steel), Cotter Pin; (C) 1/8" X 3/4", Cotter Pin; 1/8"X 3/4", Cotter Pin; 1/8" X 3/4", Heavy-Duty Scraper Attachment, Cotter Pin; 1/8" X 3/4", (Optional), Cotter Pin; 1/8" X 3/4", 4010 Or 4020 Tractor, Cotter Pin; 1/8" X 3/4", For Heavy-Duty Scraper Attachments, Cotter Pin; (B) 1/8" X 3/4", Cotter Pin; (A) (D) 1/8" X 3/4", Cotter Pin; (D) 1/8" X 3/4", Cotter Pin; (A) 1/8" X 3/4", Cotter Pin; 1/8" X 3/4", (Sub 11m1383), Cotter Pin; 1/8" X 3/4" (Stainless Steel), Cotter Pin, Cotter Pin; 1/8" X 3/4", Cotter Pin; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 1/8" X 3/4", Cotter Pin; 1/8" X 3/4" (Sub 11m1383), Cotter Pin; 1/8" X 3/4" (Sub 11m1383) (Stainless Steel), Cotter Pin; (Sub 11m1383), Cotter Pin; 1/8" X 3/4", Tire Skip Spacing1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Drives : Grass Seed Drive
12***94Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"2
12***03Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70***00) 9550sh (-70***00)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 70***57-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-00***87; 4250-01***13; 4450-02***14) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-01***46; 4850-00***32) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-00***95; 4450-01***85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)2
14***60Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61***46-; 1243,62***77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"2
See all parts with full part numbers in Heavy Parts AI →
Electrical
John Deere : 1520 - Drill, Grain : Electrical : Drill Sensor
19***51Cap Screw; 6.350 X 76.200 mm (1/4" X 3"), Cap Screw; 1/4" X 3", (Use With 12h302 And 14h786), Cap Screw; (A) 1/4" X 3", Cap Screw; 1/4" X 3", Cap Screw; 1/4" X 3" Shear Bolts, Cap Screw; (Use With H106340), Cap Screw, Cap Screw; 1/4"X3", Cap Screw; 1/4" X 3", (Use With H106340)2
19***28Cap Screw; (B) 3/8" X 6-1/2", Cap Screw; 3/8" X 6-1/2", (Dual Selective Control), Cap Screw; 3/8" X 6-1/2", Cap Screw; 3/8" X 6-1/2", (Dual), Cap Screw; (A) (B) 3/8" X 6-1/2", Cap Screw; (A) 3/8" X 6-1/2"2
24***87Washer; 17/64"X5/8"X.048", Washer; 9/32" X 5/8" X 0.065" 9/32" X 5/8" X 0.060", Washer; 9/32" X 5/8" X 0.065" (Use With R133450), Washer; 9/32" X 5/8" X 0.065" (Sub For 24m7055), Washer; (B: Not Included) 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065", 4.6 M (15') Box, Washer; 7.137 X 15.875 X 1.651 mm, (Sub For 24m7055), Washer; 9/32" X 5/8" X 0.065" (A), Washer; (Use With R90127), Washer; 9/32" X 5/8", Washer; 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065", Kit Ar69585 And Ar73922, Washer; 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065" (Use With An281515), Washer; 9/32" X 5/8" X 0.065", (1 Used Gasoline) (2 Used Diesel), Washer; 9/32" X 5/8" X 0.065", Rubber, Washer; 9/32" X 5/8" X 0.065" (5460, 5820, 8630, 8640, 8650), Washer; 9/32" X 5/8" X 0.065" (Use With Re65878), Washer; 9/32" X 5/8" X 0.065", Sweden Only, Washer; Flat, Black, 1/4", Washer; 9/32" X 5/8" X 0.065", (Sub For R3031r), Washer; 7.137 X 15.875 X 1.651 mm (9/32" X 5/8" X 0.065"), Washer; 9/32" X 5/8" X 0.065", Hinge Pin, Washer; 7.137 X 15.875 X 1.651 mm (9/32" X 5/8" X 0.065") (Sub For Ffsb109336), Washer; 9/32" X 5/8" X 0.065", (Sub For Mg508188), Washer; 9/32" X 5/8" X 0.065" Low Shaft Speed Monitor, Washer; 9/32" X 5/8" X 0.065", Dry Hill-Drop Only, Washer; 9/32" X 5/8" X 0.065", (Corn Head Attachment), Washer; 9/32" X 5/8" X 0.065", Liquid Hill-Drop Only, Washer; (A) 9/32 X 5/8" X .060", Washer; 9/32" X 5/8" X 0,060", Washer; 9/32" X 5/8" X 0.065", (Code 1637), Washer; (A: 6076trw07 Only) 9/32" X 5/8" X 0.065", Washer; 1/4", Washer; 7.137 X 15.875 X 1.651 mm, Washer; 9/32" X 5/8" X 0.065" (Belt Drive), Washer; .060" X 9/32" X 5/8", Washer; 9/32" X 5/8" X 0.065" (Shut-Off), Washer; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 9/32" X 5/8" X 0.065", Washer; (B: W/O Cab) 9/32" X 5/8" X 0.065", Washer; (Use With R112197), Washer; 9/32" X 5/8" X0.065", Washer; 1/4" X 1", Washer; (A) (B) 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065", (Sub For He526-0018) (Sub 24h1287), Washer; 9/32" X 5/8" X 0.060", (Use With Straw Chopper), Washer; 9/32" X 5/8" X 0.065", (Sub E91190), Washer; (A) 9/32"X5/8"X.060", Washer; 9/32" X 5/8" X 0.065", Not Used This Application, Washer; 9/32"X5/8"X.060", Washer; 9/32" X 5/8" X 0.065", (Sub For Et13804), Washer; 9/32" X 5/8"X 0.065", Washer; 1/4"X3/4"X.060", Washer; 9/32" X 5/8" X 0.065" (Nlr), Washer; 17/64"X5/8"X.048" (Sub For 24h1714), Washer; 9/32" X 5/8" X .060", Washer; 9/32" X 5/8" X 0.065", (Sub For Ffsb109336), Washer; 9/32" X 5/8" X 0.065", (Corn Head And One Row Ear Corn Units), Washer; 9/32" X 5/8" X 0.065", (35 Used For 714, 714a; 41 Used For 716, 716a), Washer; 9/32" X 5/8" X 0.065" 1/4" X 1", Washer; 9/32" X 5/8" X 0.065" (4 X 12), Washer; 9/32" X 5/8" X 0.065", (No Longer Required), Washer; 9/32" X 5/8" X 0.065", (Nicht Mehr Bendetigt), Washer; 9/32" X 5/8" X 0.065", (Sub For Et12293), Washer; 9/32" X 5/8" X 0.065" 9/32" X 5/8" X 0.048", Washer; 9/32" X 5/8" X 0.065", (Kits Ar69585 And Ar73922), Washer; (B: Not Included In Kit) 9/32" X 5/8" X 0.065", Washer, Washer, Washer; 9/32" X 5/8" X 0.065", (Export), Washer; 17/64x5/8"X.048", Washer; 9/32" X 5/8" X 0.065", (243, 5 Used; 343, 10 Used), Washer; 9/32"X5/8", Washer; (E: (Xxxxxx- ) 7610-00***44; 7710-00***91; 7810-00***84) 9/32" X 5/8" X 0.065", Washer; 7.137 X 15.875 X 1.651 mm, Washer; 9/32" X 5/8" X 0.065" (No Longer Required), Washer; 9/32" X 5/8" X 0.065" For Re502828, Washer; 9/32" X 5/8" X 0.065", (Sub For A3031r), Washer; (A) 9/32" X 5/8" X 0.065", Washer; (A) 9/32" X 5/8" X 0.065", (Sub An192150), Washer; 9/32x5/8", Washer; 9/32" X 5/8" X 0.060", Washer; 7.137 X 15.875 X 1.651 mm (9/32" X 5/8" X 0.065"), Washer; 9/32" X 5/8" X 0.065" (Use With 14m7273), Washer; 9/32" X 5/8" X 0.065", (1-Row Ear Corn Unit), Washer; 9/32" X 5/8" X 0.065", (Sub For Et10717), Washer; (C) 9/32" X 5/8" X 0.065", Washer; Flat, 1/4", Washer; (C), Washer; (B) 9/32" X 5/8" X 0.065", Washer; (A) (B) (C) 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065", (Sub For Et12282), Washer; 9/32" X 5/8" X 0.065", (Sub For Et12286)4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Electrical : Warning Lights And Mounting Brackets ( - 1998)
12***01Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)6
12***02Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70***00) 9550sh ( -70***00)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (70***01- ) 9550sh (70***01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual)2
14***86Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-70***00) 9550sh (-70***00)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-70***00) & 9750sts (-70***00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Electrical : Warning Lights And Mounting Brackets (1999 - )
03***09Bolt; 5/16" X 1", Bolt; 5/16" X 1" (Disk), Bolt; 5/16" X 1" (Use With 14h819), Bolt; (243, 244, 343, 344, 443, 444, 543, 546, 643, 644, 645, 843, 844), Bolt; 5/16" X 1" (213-8 Used; 215 And 216-10 Used; 218-12 Used; 220, 222, And 224-14 Used), Bolt; 5/16" X 1", Rd. Hd., Bolt; 5/16" X 1", (Grain, Corn And Bean), Bolt; (B) 5/16" X 1", Bolt; 5/16" X 1" (Use With N10213), Bolt, Bolt; X 5/16" X 1", Bolt; 5/16" X 1", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a, And 853a; 22 Used-854a And 1253a), Bolt; 7.925 X 25.400 mm (5/16" X 1"), Bolt; 5/16" X 1" (913-8 Used; 915-10 Used; 918-12 Used; 920, 922, And 924-14 Used; 925-16 Used, 930-20 Used), Bolt; 5/16" X 1", (Use With 12h303, 14h785), Bolt; 5/16" X 1" (913, 915, 918, 920-4 Used; 922, 924 And 925, 6 Used; 930-8 Used) (Thru Backsheet Angles), Bolt; 5/16"X1", Bolt; (W) 5/16" X 1", Bolt; 5/16" X 1" (Square Neck), Bolt; 5/16" X 1" (A), Bolt; (C) 5/16" X 1", Bolt; 7.925 X 25.400 mm (5/16" X 1") Reinforcement To Channel, Bolt; 5/16" X 1" (Sub For H75408), Bolt; (A) 5/16" X 1", Bolt; Rd. Hd., 5/16" X 1", Bolt; 5/16" X 1" (Use With 14h785)8
12***92Lock Washer; (A: Except Sn:) 1/2", Lock Washer; 1/2", (Sub For Et11546), Lock Washer; 1/2", Internal Tooth, Lock Washer, Lock Washer; (A: Amber Light And Bracket Assembly) 1/2" (C) (D), Lock Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Kk4767b), Lock Washer; (A) (B) 1/2", Lock Washer; (C) 1/2", Lock Washer; (D) 1/2", (Sub For Mg80679), Lock Washer; (A: Except Sn - 5320n: 33***13) 1/2", Lock Washer; (A) 1/2", Lock Washer; 1/2", (Sub For Et11549), Lock Washer; 1/2", Rear Gang, Lock Washer; (F) 1/2", Lock Washer; (A: Amber Warning Light And Bracket Assembly) 1/2", Lock Washer; (B) 1/2", Lock Washer; (A: Amber Light And Bracket Assembly) 1/2" (C)(D), Lock Washer; 1/2", Internal, Lock Washer; 1/2" (Sub For 12h257), Lock Washer; 1/2", Int. Tooth, Lock Washer; 1/2" Int. Tooth, Lock Washer; 1/2" (Use With Re247775), Lock Washer; (A: Also Includes Sn - 5320n: 33***13) 1/2", Lock Washer; (D: Also Includes Sn:) 1/2", Lock Washer; 1/2", (Sub For H75716), Lock Washer; 1/2", Lock Washer; 1/2", Lock Washer; 1/2", (4 Used With Re69223), Lock Washer; (E) 1/2", Lock Washer; 1/2" (A), (B), Lock Washer; (A) 12.700 mm, Lock Washer; 1/2" (Sub For H75716), Lock Washer; 1/2" (A) (B), Lock Washer; 1/2", (Sub For Mg80679), Lock Washer; 1/2" (A), Lock Washer; (E) 1/2", Front Gang, Lock Washer; (A: Mg803115 Light Kit) 1/2", Lock Washer; (A) (C) (D) 1/2", Lock Washer; (B) (D) 1/2", Lock Washer; (A: Tss Transmission) 1/2", Lock Washer; (B), Lock Washer; 1/2", (A), Lock Washer; (A)2
12***02Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70***00) 9550sh ( -70***00)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (70***01- ) 9550sh (70***01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Electrical : Weather Pack™ Terminals And Connectors
R7***47Seal; (Pkg. Of 5), Seal, Seal; Pkg. Of 5, Seal; (C: Pkg Of 5), Seal; (Pkg. Of 5), Seal; (C), Seal; (Pkg Of 5), Seal; (Pkg (5)), Seal; (B), Seal; (C), Seal; Package Of 5, Seal; Packg Of 5, Seal; (Packg (5)), Seal; Packg (5)1
R7***48Seal; (A: (61***80-): 4045tl063 With Re506367 Fuel Injection Pump, W/O Engine Control Unit) (B: (61***63-): 4045tl054 With Re505570 Fuel Injection Pump, W/O Engine Control Unit) (C: (61***60-): 4045tl055 With Re505571 Fuel Injection Pump, W/O Engine Control Unit), Seal; (Packg (5)), Seal, Seal; Pkg Of 5, Seal; (Package Of 5), Seal; (Pkg. Of 5), Seal; (A: (61***60-): 4045tl055 With Re505571 Fuel Injection Pump, W/O Engine Control Unit) (B: (61***05-): 4045tl055 With Re505573 Fuel Injection Pump, With Engine Control Unit), Seal; (A: For Cd4045tl051 (Dd16108), With Re506368 Fuel Injection Pump), Seal; (A: For Baletrak Wiring Harness) (B: For Isobus Wiring Harness), Seal; (Package Of 25), Seal; (Pkg Of 5), Seal; Package Of 5, Seal; (Pkg. Of 5) (Sub Re12331), Seal; Pkg Of 40, Seal; (B), Seal; (A: Cd4045tl052: For Fuel Injection Pump Re506369 And Re506370) (B: Cd4045tl053: For Fuel Injection Pump Re506371 And Re506372), Seal; Seal (Pkg. Of 5), Seal; (A: 5105: 3029dlv56, 5205: 3029dlv57), Seal; Packg (5), Seal; (Sub Re12331), Elec. Connector Accessory; (C), Seal; (A: Cd6068dl070), Elec. Connector Accessory; (Pkg. Of 5), Seal; (A: (61***91-): 4045tl056 With Re505574 Fuel Injection Pump, W/O Engine Control Unit) (B: (62***58-): 4045tl056 With Re505575 Fuel Injection Pump, With Engine Control Unit), Seal; (A: (61***80-): 4045tl063 With Re506367 Fuel Injection Pump, W/O Engine Control Unit) (B: (61***63-): 4045tl054 With Re505570 Fuel Injection Pump, W/O Engine Control Unit), Seal; Seal, Seal; (C), Seal; (Packg 5), Seal; (Pkg. Of 3), Seal; (A: 5105: 3029dlv56, 5205: 3029dlv57), Seal; (A: (616760cd-): 4045tl055 With Re505571 Fuel Injection Pump, W/O Engine Control Unit) (B: (616391cd-): 4045tl056 With Re505574 Fuel Injection Pump, W/O Engine Control Unit) (C: (619437cd-): 4045tl057 With Re505576 Fuel Injection Pump, W/O Engine Control Unit), Seal; Packg Of 5, Seal; (A: For Cd4045dl050 (Dd16106)) (B: For Cd4045tl050 (Dd16107)) (C: For Cd4045tl051 (Dd16108)), Seal; (A: Cd4045tl071), Seal; (C: Pkg Of 5), Seal; (A: (61***91-): 4045tl056 With Re505574 Fuel Injection Pump, W/O Engine Control Unit) (B: (61***37-): 4045tl057 With Re505576 Fuel Injection Pump, W/O Engine Control Unit), Seal; (A), Seal; (A: For Cd4045tl052 (Dd16109)) (B: For Cd4045tl053 (Dd16111)), Seal; (Pkg (5)), Seal; (A: 6068dl070)1
R7***49Seal; (Pkg. Of 5), Seal, Seal; (G: Pkg Of 5), Seal; (C), Seal; 18 Or 20 Ga.Wire Package Of 5, Seal; Packg (5), Seal; 18 Or 20 Ga. Package Of 5 Wire, Seal; (Pkg. Of 5), Seal; (Packg (5)), Seal; (C), Seal; 18 Or 20 Ga. Wire, Seal; Package Of (5), Seal; Package Of 5, Seal; (A: For Baletrak Wiring Harness) (B: For Isobus Wiring Harness), Seal; (Pkg (5)), Seal; Pkg. Of 5, Seal; (Pkg Of 5), Seal; (C: Pkg Of 5), Seal; (B), Seal; Packg Of 5, Seal; 18 Or 20 Ga.Wire Package Of 40, Seal; Pkg Of (5)1
See all parts with full part numbers in Heavy Parts AI →
Frame
John Deere : 1520 - Drill, Grain : Frame : Decals And Labels
A5***91Label; 4.6 M (15 Ft.) "Index"; Located On Fluted-Feed Rate Shifter Lever; Only, Label; 4.6 M (15 Ft.), Label; 4.6 M (15 Ft.) "Index Quadrant"; Located On Fluted Feed Rate Shifter; Only, Label; 4.6 M (15 Ft.) Only "Index"; Located On Fluted Feed Rate Shifter Lever, Label; 4.6 M (15 Ft.) Only, "Index"; Located On Fluted Feed Rate Shifter Lever, Label; 4.6 M (15 Ft.) Only, "Index"; Located On Fluted-Feed Rate Shifter Lever1
A5***15Label; "Index"; Located On Grass Seed Index1
A6***14Label; "1520"; Located On R.H. Rear Of Drill1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Double-Disk Opener And Scrapers
03***28Bolt; 5/16" X 4", (Use With N217829), Bolt; 5/16" X 4"1
14***60Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61***46-; 1243,62***77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"1
14***44Nut; 5/8", L.H. (Left-Hand Thread), Nut; 5/8", Nut; L.H. (L.H. Thread) 5/8", Nut; 5/8" Lh (Lh Thread), Nut; 5/8" L.H., Nut; 5/8", Jam, L.H., Nut; 5/8", L.H., Nut; 5/8", L.H. Thread, Nut; 5/8", Jam L.H. Thread, Nut; 5/8", L.H. (Use With Aa32826), Nut; 5/8", L.H. Use With Aa32826 Only, Nut; 5/8", L.H., Jam, Nut; 5/8" L.H. (Left-Hand Thread), Nut; 5/8", L.H. Jam1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Feed Cup Shield
N2***92Shield; L.H. Illustrated, Shield, Shield; (Sub For An210219), Shield; (Sub For An163578 And An210219)1
N1***50Screw; 7.925 X 19.050 mm (5/16" X 3/4") (Sub For N10212, This Application), Screw; 5/16-18 X 3/4 Hexflange Hd Zyd, Screw; 5/16" X 3/4", (Use With An212650), Screw, Screw; 5/16" X 3/4", Screw; 5/16" X 3/4", (Sub For N71292, This Application), Screw; 5/16" X 3/4" (Disk), Screw; 7.925 X 19.050 mm, Screw; 5/16" X 3/4", (Use With An162748 Or An212650), Screw; Required On 18' Machines Prior To ( -00***00), 21', 25' And 30' Machines., Screw; 7.925 X 19.050 mm (5/16" X 3/4")0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Fluted-Feed Cups And Shafts
03***90Bolt; 5/16" X 1-1/2" (Use With N10213), Bolt; (A) 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2" 1/4 X 1/2, Bolt; 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2" (A), Bolt; 5/16" X 1-1/2", (Use With An190794, An190795, An190796 And An190797), Bolt; 5/16" X 1-1/2", (3-Joint Powerlines), Bolt; 5/16" X 1-1/2" (3 Joint Power Lines), Bolt; 5/16"X1-1/2", Bolt; 5/16" X 1-1/2", (French Only)3
11***36Cotter Pin; 1/8" X 1", (6 Used On Standard Transmission) (4 Used On Hydrostatic Drive), Cotter Pin; (A) 1/8" X 1", Cotter Pin; 1/8" X 1" (A), Cotter Pin; 1/8" X 1", Cotter Pin, Cotter Pin; 1/8"X1", Cotter Pin; 1/8" X 1" 1/8" X 1", Cotter Pin; (B) 1/8" X 1", Cotter Pin; 1/8" X 1", (Sub For 11h236), Cotter Pin; (D) 1/8" X 1", Cotter Pin; 1/8" X 10
11***21Cotter Pin; 4 X 25 mm (A) (B), Cotter Pin; 4 X 25 mm, (Use With S1728m), Cotter Pin; 4 X 25 mm, Cotter Pin; (A: Also Use With Fi Kit Mn10741) 4 X 25 mm, Cotter Pin; (H) 4 X 25 mm, Cotter Pin; 4 X 25 mm, (Nla), Cotter Pin; 4 X 25 mm, (Next To Feed Cup), Cotter Pin; 5/32"X1", Cotter Pin; 5/32"X1" (Sub For 11h239), Cotter Pin; 4 X 25 mm (A), Cotter Pin; 4 X 25 mm (Feed Cup), Cotter Pin; 4x25mm (Sub For 11m1393), Cotter Pin; 4 X 25 mm 4x26 mm, Cotter Pin; 4 X 25 mm, (Sub For 11h230), Cotter Pin; 4 X 25 mm (B), Cotter Pin; (A: United Kingdom, France, Germany And Sweden) 4 X 25 mm, Cotter Pin; 4 X 25 mm (Next To Feed Cup), Cotter Pin; (A) 4x25mm (Sub For 11h239), Cotter Pin; (Sub F2600916), Cotter Pin; 4 X 25 mm, (Next To Feed Cups), Cotter Pin; 4 X 25 mm R.H., Cotter Pin; (C: Next To Feed Cup) 4 X 25 mm, Cotter Pin; (D) 4 X 25 mm, Cotter Pin; 4 X 25 mm (Sub For Ch17103), Cotter Pin; 4 X 25 mm 5/32"X1", Cotter Pin; 4 X 25 mm Sub For 11m7028, Cotter Pin; 4x25, Cotter Pin; (D: (Xxxxxx- ) 7600-00***27; 7700-00***05; 7800-00***04) 4 X 25 mm, Cotter Pin; W/ Telescopic Draft Links, Cotter Pin; 4 X 25 mm, (Australia And New Zealand Only), Cotter Pin; 4 X 25mm, Cotter Pin; (C: United Kingdom, France, Germany And Sweden) 4 X 25 mm, Cotter Pin; 0.157" X 0.984", Cotter Pin; 4x25mm (Sub For 11h239), Cotter Pin; 4 X 25 mm, (Sub For 11h239), Cotter Pin; 4x28mm, Cotter Pin; (A) 0.157" X 0.984", Cotter Pin; 4 X 25 mm 4 X 25 mm, Cotter Pin; 4 X 25 mm, (Use With B2045m), Cotter Pin; (C) 4 X 25 mm, Cotter Pin; 4 X 25 mm M4x28 Zn, Cotter Pin, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 25 mm, Cotter Pin; (312) 4 X 25mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 25 mm, R.H., Cotter Pin; 4 X 25 mm M4 X 200
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Fluted-Feed Inserts, Covers And Caps
03***39Bolt; 5/16" X 5/8" (38"), Bolt; X 5/16" X 5/8", Bolt; 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8" Std. Neck, Bolt; 5/16" X 5/8" (213-2 Used; 215 And 216-4 Used; 218-6 Used; 220, 222, And 224-8 Used), Bolt; 5/16" X 5/8" (30"), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; 5/16" X 5/8" (Use With 12h334 And 14h611)2
A5***36Insert, Insert; 20 Ft. (Illustrated)1
A5***52Insert; (15 X 6) 4.6 M (15 Ft.)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Fluted-Feed Shifter Lever And Index Label
19***73Bolt; (B: (Xxxxxx- ) Serial No. 8450-00***19; 8650-00***98) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", Hs Sae 8, Bolt; 1/2" X 1-3/4" (Sae 8), Bolt; 1/2"X1-3/4", Bolt; 1/2"X1-3/4", (For 3179dl005), Bolt; 1/2" X 1-3/4", 118 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4", 115 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4" Sae 8, Bolt; 1/2"X1-3/4" (For 3179dl014), Bolt; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Hs, Sae 8), Bolt; 1/2"X1-3/4" (For 3179dl005), Bolt, Bolt, Bolt; 1/2"X1-3/4", For 3179dl013, Bolt; 1/2" X 1-3/4", (Use With Cd16045), Bolt; 1/2" X 1-3/4", (Hs Sae 8), Bolt; 12.700 X 44.450 mm, Bolt; 1/2" X 1-3/4", Hs, Sae 8, Bolt; 1/2"X1-3/4", For 3179dl015, Cap Screw; 1/2" X 1-3/4", (Torque 120 Lb/Ft), Bolt; (1503) Hs, Sae 8, 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 1/2" X 1-3/4", Hs, Sae 8, Bolt; 1/2" X 1-3/4", (Lower), Bolt; 1/2" X 1-3/4" Hs, Sae 8, Bolt; 1/2"X1-3/4" (For Cd16045), Bolt; 1/2" X 1-3/4" 1/2"X1-3/4", Bolt; 1/2"X1-3/4", (For 3179dl014), Bolt; 1/2" X 1-3/4", Cap Screw; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (Dh-01, Dh-03, Gh-01, Ha-D), Bolt; 1/2" X 1-3/4" 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (Sae 8), Bolt; 1/2" X 1-3/4", (Hs, Sae 8), Bolt; 1/2"X1-3/4", For 3179dl014, Bolt; 1/2"X1-3/4"(3"X8"), . Bolt, Bolt; 1/2"X1-3/4" (For R109086), Bolt; 1/2"X1-3/4", For 3179dl007, Bolt; 1/2" X 1-3/4", Hs, Sae 8; 6-Btm. Only, Bolt; (A) (B) 12.700 X 44.450 mm (1/2" X 1-3/4"), Bolt; 1/2" X 1-3/4", (Hs, Sae 8) For 100 mm X 180 mm (4- X 7-Inch) Or 125 mm X 180 mm (5- X 7-Inch) Toolbar, Bolt; Hs, Sae 8, 1/2" X 1-3/4", Bolt; Hs, Sae 8, 1/2" X 1-3/4" (Used With Single Selective Control Valve), Bolt; 1/2"X1-3/4", For 3179dl004, Bolt; 1/2" X 1-3/4" (A) (B), Bolt; 1/2" X 1-3/4", 120 Flail Shredder - Qty. Per Rotor, Bolt; 1/2" X 1-3/4" (Ord Cd16045), Bolt; 1/2" X 1-3/4" (Hs, Sae 8) Use W/Felt Spacer, Bolt; 1/2"X1-3/4" (Sub For 19h1777), Bolt; 1/2" X 1-3/4" (Sub For M121686), Bolt; 1/2"X1-3/4" (Ord Cd16045), Bolt; 1/2"X1-3/4", For 3179dl016, Bolt; (B) (C) 1/2" X 1-3/4", Bolt; 1/2"X1-3/4", For 3179dl005, Bolt; (Sae 8), Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (For Cd16045), Bolt; (A) 1/2" X 1-3/4", Bolt; 1/2"X1-3/4" (Ord R109086), Bolt; 1/2"X1-3/4", For 3179dl001, Bolt; 1/2" X 1-3/4" Full Thread1
19***83Screw; 9.525 X 38.100 mm, Screw; (A: Separate Fertilizer Placement) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (Use With N219634), Screw; 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" Lower, Screw; 3/8" X 1-1/2" (Sub For R504586, This Application ) (Also Order Re517059), Screw; 3/8" X 1-1/2" (Use With N219634), Screw; 3/8" X 1-1/2" 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (Use With Re45774), Screw; 3/8" X 1-1/2", (Use With Re62900), Screw, Screw; 3/8" X 1-1/2" (Use With Re62900)1
24***01Washer; 11x34mm, Washer; 11 5mm, Washer; 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm E, Washer; (312) 11x34mm, Washer; (312) 11,5, Washer; 11 X 34 X 3 mm, (Sub For 24h1730), Washer; 11 X 34 X 3 mm, (Sub For J217083) (44***55 Na), Washer; (A: No Longer Required) 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm Argentina, Washer; 11 X 34 X 3 mm (Sub For (4) 24h1730), Washer; 11x34x3mm, Washer; (C: For Balancing (As Required)) 11 X 34 X 3 mm 11 X 34 X 3, Washer; (D: Without Tapped Holes) 11 X 34 X 3 mm, Washer; (214, 9used; 216, 11 Used), Washer; 11,5 X 34 X 3 mm, Washer; 11 X 34 X 3 mm (Sub For (4) H106371), Washer; (A: Only For 2, 0 M Rotoflow Or Maxicut Pickup) 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm Cis, Washer; 11 X 34 X 3 mm (D), Washer, Washer; 11 mm, Washer; 11 X 34 X 3 mm Swing Pin Retainer, Washer; (214, 9 Used; 216, 11 Used), Washer; 11 X 34 X 3 mm 35 X 1,5mm, Washer; 11 X 34 X 3 mm (Sub For 24h1730), Washer; 11 X 34 X 3 mm (0.433" X 1.339" X 0.118"), Washer; 11 X 34 X 3 mm (Sub For 24h1219), Washer; (A: Use Only With Electro-Hydraulic Power Take-Off) 11 X 34 X 3 mm, Washer; (Sub For J217083), Washer; (E: Starting From Series Number 2109 (07***01-), 2111 (06***01-), 2113 (06***01-), 2115 (06***01-)) (F: Starting From Series Number 2117 (06***01-), 2122 (06***01-), 2126 (06***06-)) 11 X 34 X 3 mm 2130, Washer; (B: For Damp Harvesting Conditions) 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm (Sub For R53666), Washer; (A: With Net Coveredge) 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm 11x34mmx3, Washer; 11,5mm, Washer; 11,5 mm, Washer; (A: For 9650 (-70***00) & 9750 (-70***00)) 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm (European), Washer; (Sub For 24m7028, This Application) (Sub For J217083), Washer; 11 X 34 X 3 mm, (Sub For J217083), Washer; 11 X 34 X 3 mm, (Use With Am101679), Washer; 11 X 34 X 3 mm (0.433" X 1.339" X 0.118") (Sub For R53666), Washer; (A: Only For 2.0 M Rotoflow Or Maxicut Pickup) 11 X 34 X 3 mm, Washer; (A) 11 X 34 X 3 mm, Washer; (A: Model 9660 For North America Only) 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm 7/16" X 1" X 0.083", Washer; (C: For Balancing (As Required)) 11 X 34 X 3 mm, Washer; 11 X 34 X 3 mm (Sub Jd9260), Washer; 11 X 34 X 3 mm (Sub For J217083), Washer; 11 X 34 X 3 mm (Use With L113717), Washer; (B: For 9650 (70***01-) & 9750 (70***01-)) 11 X 34 X 3 mm (A)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Frame ( - 1997)
AA***15Frame; 4.6 M (15 Ft.)1
AA***85Frame; 6.1 M (20 Ft.)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Frame (1998 - )
AA***99Frame; 4.6 M (15 Ft.)1
AA***00Frame; 6.1 M (20 Ft.)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Grain Box - 4.6 M (15 Ft.)
21***26Screw; 5/16" X 7/8", (For 12-Bar Below Cam), Screw, Screw; 5/16" X 7/8", Screw; 5/16"X7/8", Screw; 5/16" X 7/8", 12-Bar, Below Cam, Screw; 5/16" X 7/8", (2 Used, Variable Drive; 4 Used, Regular And Long Fixed Drive), Screw; 5/16" X 7/8", (2 Used, Variable Drive; 4 Used, Long), Screw; 5/16" X 7/8" (Use With H76696)1
A5***20Sheet; Front, Sheet; (D: Front)1
A5***21Sheet; (E: Rear), Sheet; Rear1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Grain Box Lid - 4.6 M (15 Ft.)
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)5
11***59Cotter Pin; 3,2 X 20 mm, Cotter Pin; (A: Used In High Clearance Tractors Too) 3.200 X 20 mm, Cotter Pin; 3x20mm, Cotter Pin; (B: For 9650 (70***01- ) & 9750 (70***01- )) 3.200 X 20 mm, Cotter Pin; (Sub For Nf100782), Cotter Pin; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm, Cotter Pin; (A), Cotter Pin; M3 X 35, Cotter Pin; 3.200 X 20 mm (Use With Axe13285) (A), Cotter Pin; 3.200 X 20 mm (A), Cotter Pin; 3.200 X 20 mm, (Sub For 11h211), Cotter Pin; (A) (C) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm Lh., Cotter Pin; (C) 3.200 X 20 mm, Cotter Pin; (A: For 9650 ( -70***00) & 9750 ( -70***00)) 3.200 X 20 mm, Cotter Pin; 3.2x20mm, Cotter Pin; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) 3.200 X 20 mm, Cotter Pin; (A: Auxiliary Hydraulic Outlet) 3.200 X 20 mm, Cotter Pin; (Sub For 11h211), Cotter Pin; 3.200 X 20 mm 4 X 25 mm, Cotter Pin; 3.200 X 20 mm, (Auxiliary Hydraulic Outlet), Cotter Pin; (A) 3.200 X 20 mm (Use With Axe13285), Cotter Pin; 3.200 X 20 mm, (Use With Ar52267), Cotter Pin; 3.200 X 20 mm, (Sub For Mg80756 Or 11h211), Cotter Pin; 3,200 X 20 mm, Cotter Pin; (A: With Auxiliary Hydraulic Outlet) 3.200 X 20 mm, Cotter Pin; 3x22mm (Sub For 11h206), Cotter Pin; 3.200 X 20 mm, For Heavy-Duty Scraper Attachments, Cotter Pin; 3.200 X 20 mm, (Sub 11m7059), Cotter Pin; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) 3.200 X 20 mm, Cotter Pin, Cotter Pin; 3.200 X 20 mm Lh, Cotter Pin; (A: ( -Xxxxxx) 8560-00***42; 8760-00***18; 8960-00***60) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm Use With R167189, Cotter Pin; 3.200 X 20 mm, L.H., Cotter Pin; 3.200 X 20 mm L.H. (Also Order T36475 Decal), Cotter Pin; 3.200 X 20 mm (Sub For 11m7015), Cotter Pin; 3.200 X 20 mm (0.126" X 0.787"), Cotter Pin; 3.200 X 20 mm (For Al178302), Cotter Pin; 3.200 X 20 mm L.H., Cotter Pin; 3/32"X3/4", Cotter Pin; (A: Used In 5425 And 5725 Orchard Tractors Too) 3.200 X 20 mm, Cotter Pin; (D) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm (B), Cotter Pin; 3.200 X 20 mm (A), (Use With Axe13285), Cotter Pin; 3,2 X 20mm, Cotter Pin; 3.200 X 20 mm (Sub For 11h211), Cotter Pin; (A) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm 3, 2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 0.126" X 0.787", Cotter Pin; 3.200 X 20 mm, (Sub 11m7015), Cotter Pin; 3.200 X 20 mm, (Includes H238030 And H144824), Cotter Pin; (A: Also Use With Fi Kit Mn10741) 3.200 X 20 mm, Cotter Pin; 3 2x20mm, Cotter Pin; 3.200 X 20 mm (Use With R167189), Cotter Pin; (A: Used In 5415 And 5715 Orchard Tractors) 3.200 X 20 mm4
24***24Washer; .060" X 11/32" X 1", Washer; 11/32" X 1" X 1/16", (Use With Ah106900), Washer; 0.060"X11/32"X1" (Sub For 24h1136), Washer; 11/32"X1"X.060", Washer; (A) (B) 11/32" X 1" X 1/16", 2 Used Per Support Tube, Washer; (A) 11/32" X 1" X 1/16", Washer; 11/32" X 1" X 1/16", (Use With H96652 And Ah106900), Washer; 11/32" X 1" X 1/16" (2 - Hoe) (4 - Disk), Washer; .060" X 11/32" X 1" (Sub For 24h1136), Washer; (A) 11/32" X 1" X .060", Washer; 11/32" X 1" X 1/16", (12 Used - 854a And 14 Used - 1253a), Washer; (C) 11/32" X 1" X 1/16", Washer; 11/32" X 1" X 1/16" (Use With H96652 And Ah106900), Washer; 11/32" X 1" X 1/16", 20', Washer; 11/32" X 1" X 1/16" Use With The 20ft Auger, Washer; 11/32" X 1" X .060", Ar, Washer; 11/32"X1"X.060" Canada, Washer; 11/32" X 1" X 0,060", Washer; 11/32" X 1" X 1/16", (Use With Ty15130), Washer; 11/32" X 1" X 1/16", (700), Washer; 11/32" X1"X.060", Washer; 11/32" X 1" X .060", Washer; 8,7 X 25,4 X 1,5 mm, Washer; 11/32" X 1" X 1/16", (2 Used On 03h1549), Washer; 11/32x1"X.060", Washer; 11/32" X 1" X 1/16", Washer; 11/32" X 11/16" X .060" (Sub For 24h1136), Washer; 11/32" X 1" X 1/16", (Use With H96652), Washer; 11/32" X 1" X 1/16" (Sub 24m7207), Washer; (B) (C) 11/32" X 1" X 1/16", Washer, Washer; (D) 11/32" X 1" X 1/16"0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Grain Box Lid - 6.1 M (20 Ft.)
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)10
11***59Cotter Pin; 3,2 X 20 mm, Cotter Pin; (A: Used In High Clearance Tractors Too) 3.200 X 20 mm, Cotter Pin; 3x20mm, Cotter Pin; (B: For 9650 (70***01- ) & 9750 (70***01- )) 3.200 X 20 mm, Cotter Pin; (Sub For Nf100782), Cotter Pin; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm, Cotter Pin; (A), Cotter Pin; M3 X 35, Cotter Pin; 3.200 X 20 mm (Use With Axe13285) (A), Cotter Pin; 3.200 X 20 mm (A), Cotter Pin; 3.200 X 20 mm, (Sub For 11h211), Cotter Pin; (A) (C) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm Lh., Cotter Pin; (C) 3.200 X 20 mm, Cotter Pin; (A: For 9650 ( -70***00) & 9750 ( -70***00)) 3.200 X 20 mm, Cotter Pin; 3.2x20mm, Cotter Pin; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) 3.200 X 20 mm, Cotter Pin; (A: Auxiliary Hydraulic Outlet) 3.200 X 20 mm, Cotter Pin; (Sub For 11h211), Cotter Pin; 3.200 X 20 mm 4 X 25 mm, Cotter Pin; 3.200 X 20 mm, (Auxiliary Hydraulic Outlet), Cotter Pin; (A) 3.200 X 20 mm (Use With Axe13285), Cotter Pin; 3.200 X 20 mm, (Use With Ar52267), Cotter Pin; 3.200 X 20 mm, (Sub For Mg80756 Or 11h211), Cotter Pin; 3,200 X 20 mm, Cotter Pin; (A: With Auxiliary Hydraulic Outlet) 3.200 X 20 mm, Cotter Pin; 3x22mm (Sub For 11h206), Cotter Pin; 3.200 X 20 mm, For Heavy-Duty Scraper Attachments, Cotter Pin; 3.200 X 20 mm, (Sub 11m7059), Cotter Pin; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) 3.200 X 20 mm, Cotter Pin, Cotter Pin; 3.200 X 20 mm Lh, Cotter Pin; (A: ( -Xxxxxx) 8560-00***42; 8760-00***18; 8960-00***60) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm Use With R167189, Cotter Pin; 3.200 X 20 mm, L.H., Cotter Pin; 3.200 X 20 mm L.H. (Also Order T36475 Decal), Cotter Pin; 3.200 X 20 mm (Sub For 11m7015), Cotter Pin; 3.200 X 20 mm (0.126" X 0.787"), Cotter Pin; 3.200 X 20 mm (For Al178302), Cotter Pin; 3.200 X 20 mm L.H., Cotter Pin; 3/32"X3/4", Cotter Pin; (A: Used In 5425 And 5725 Orchard Tractors Too) 3.200 X 20 mm, Cotter Pin; (D) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm (B), Cotter Pin; 3.200 X 20 mm (A), (Use With Axe13285), Cotter Pin; 3,2 X 20mm, Cotter Pin; 3.200 X 20 mm (Sub For 11h211), Cotter Pin; (A) 3.200 X 20 mm, Cotter Pin; 3.200 X 20 mm 3, 2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 0.126" X 0.787", Cotter Pin; 3.200 X 20 mm, (Sub 11m7015), Cotter Pin; 3.200 X 20 mm, (Includes H238030 And H144824), Cotter Pin; (A: Also Use With Fi Kit Mn10741) 3.200 X 20 mm, Cotter Pin; 3 2x20mm, Cotter Pin; 3.200 X 20 mm (Use With R167189), Cotter Pin; (A: Used In 5415 And 5715 Orchard Tractors) 3.200 X 20 mm8
24***24Washer; .060" X 11/32" X 1", Washer; 11/32" X 1" X 1/16", (Use With Ah106900), Washer; 0.060"X11/32"X1" (Sub For 24h1136), Washer; 11/32"X1"X.060", Washer; (A) (B) 11/32" X 1" X 1/16", 2 Used Per Support Tube, Washer; (A) 11/32" X 1" X 1/16", Washer; 11/32" X 1" X 1/16", (Use With H96652 And Ah106900), Washer; 11/32" X 1" X 1/16" (2 - Hoe) (4 - Disk), Washer; .060" X 11/32" X 1" (Sub For 24h1136), Washer; (A) 11/32" X 1" X .060", Washer; 11/32" X 1" X 1/16", (12 Used - 854a And 14 Used - 1253a), Washer; (C) 11/32" X 1" X 1/16", Washer; 11/32" X 1" X 1/16" (Use With H96652 And Ah106900), Washer; 11/32" X 1" X 1/16", 20', Washer; 11/32" X 1" X 1/16" Use With The 20ft Auger, Washer; 11/32" X 1" X .060", Ar, Washer; 11/32"X1"X.060" Canada, Washer; 11/32" X 1" X 0,060", Washer; 11/32" X 1" X 1/16", (Use With Ty15130), Washer; 11/32" X 1" X 1/16", (700), Washer; 11/32" X1"X.060", Washer; 11/32" X 1" X .060", Washer; 8,7 X 25,4 X 1,5 mm, Washer; 11/32" X 1" X 1/16", (2 Used On 03h1549), Washer; 11/32x1"X.060", Washer; 11/32" X 1" X 1/16", Washer; 11/32" X 11/16" X .060" (Sub For 24h1136), Washer; 11/32" X 1" X 1/16", (Use With H96652), Washer; 11/32" X 1" X 1/16" (Sub 24m7207), Washer; (B) (C) 11/32" X 1" X 1/16", Washer, Washer; (D) 11/32" X 1" X 1/16"0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Grass Seed Box And Cover
12***46Lock Washer; 0.190", (Sub For 19***06 Or 19***44), Lock Washer; 0.190", Lock Washer; 0.190", (Sub For R56012), Lock Washer; 0.190" Na, Lock Washer; (F) 0.190", (Use With Ar66424), Lock Washer; (Sub For Ffsb107825), Lock Washer; 0.190", (Sub For T18836), Lock Washer; (K) 0.190", Lock Washer; No 10, Lock Washer; 0.190", (Use With T23462 And T23463), Lock Washer; 0.190", (9 Used On Each Draper), Lock Washer; 0.190", (Sub For 19***06 And T18836), Lock Washer; 0.190" (Use With T23460 And T23461), Lock Washer; 0.190", (Sub For 19***06), Lock Washer; (C) 0.190", Lock Washer; No. 10, Lock Washer; 0.190", (Sub For 19***06) No. 10, Lock Washer; (A) (B) 0.190", Lock Washer; 0.190", Marked 1156, Lock Washer; 0.190", 18 mm (.007"), Lock Washer; 0.190" (Sub For T18836), Lock Washer; 0.190" (Use With T23462 And T23463), Lock Washer; 0.190" 0.190", Lock Washer; N.10, Lock Washer; Ar, No.10, Lock Washer; 0.190", Upper, Lock Washer; 0.190", (3004 And 3005), Lock Washer; 0.190", No. 10, Lock Washer; 0.190", Connector To Field Coil Lead, Lock Washer; 4.826 mm (0.190"), Lock Washer; No.10, Lock Washer, Lock Washer; 0.190", (Sub For 18***58), Lock Washer; 4.826 mm, Lock Washer; 0.190", (Sub For H23195), Lock Washer; 0.190" (Use With T23460 And T23461 And Ar72960), Lock Washer; 0.190", (Sub R122848), Lock Washer; 0.190" (A), Lock Washer; No10, Lock Washer; 0.190", (Sub For Ffsb107825), Lock Washer; 0.190", (Use With T23460 And T23461), Lock Washer; (F) 0.190", (Use With At25619), Lock Washer; Connector To Field Coil Lead, No. 10, Lock Washer; 0.190", (Sub For Mg80684), Lock Washer; 0.190" (Use With T23460, T23461 And Ar72960), Lock Washer; 0.190", (Use With R70407, R72817, R72818), Lock Washer; 0.190" (Switch Terminal) (Use With Ar66494), Lock Washer, Lock Washer; 0.190", (Use With T23460, T23461 And T23463), Lock Washer; 0.190", (Sub For A767r), Lock Washer; (B) 0.190", Lock Washer; 0.190", Lock Washer; 0.190", (Sub For Ty4169), Lock Washer; 0.190", (Gasoline), Lock Washer; 0.190", (Sub For T11740), Lock Washer; 0.190", (Nla), Lock Washer; 0.190" (Use With Am53945), Lock Washer; 0.190", (Use With Ar11109 Or Ar11116), Lock Washer; 10, Lock Washer; (A) No.10, Lock Washer; (A) 0.190", (Sub For T11740), Lock Washer; (B) No.10, Lock Washer; 0.190", (Sub For M80684), Lock Washer; 0.190" (Use With T23460, T23461 And T23463), Lock Washer; 0.190" (Use With R70407, R72817, R72818), Lock Washer; (A) No. 10, Lock Washer; 0.190" (Use With Ar72960, T23460 And T23461), Lock Washer; (A) (B) (C) 0.190", Lock Washer; (A) 0.190", Lock Washer; Ar, No. 10, Lock Washer; 0.190", No.10, Lock Washer; 4.826 mm (0.190"), Lock Washer; 0.190" (Use With Mg279927), Lock Washer; (A) No 10, Lock Washer; 0.190" (404dh-03)1
14***78Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 101
21***00Screw; 0.190" X 3/8", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Screw; No.10x3/8", Screw; 4.826 X 9.525 mm (0.190" X 3/8"), Screw; 0.190" X 3/8", U.S. Only, Screw; 0.190" X 3/8", (Sub For Mg277053), Screw; 0.190" X 3/8", Screw; 0.190" X 3/8", Mach., Screw; No. 10 X 3/8", Screw; 0.190" X 3/8", Screw; No.10 X 3/8", Screw; 0.190" X 3/8", (Sub For M83439), Screw; 0.190" X 3/8", Mach. (Denmark, Spain, Sweden And United Kingdom Only), Screw; 4.826 X 9.525 mm, Screw; 0.190" X 3/8", Herbicide Only, Screw; 0.190" X 3/8", Mach. Pan Hd.1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Grass Seed Feed Shaft
03***27Bolt; 1/4" X 1-1/4", (144 Used For 714, 714a; 162 Used For 716, 716a), Bolt; 1/4" X 1-1/4" (Used With Wooden Slats), Bolt; 1/4" X 1-1/4", Bolt; (A: Not Used In U.S. And Canada) 1/4" X 1-1/4", Bolt; (A: European Version) 1/4" X 1-1/4", Bolt; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 1/4" X 1-1/4", Bolt; 1/4" X 1-1/4", Use With Ab18526 Only1
11***17Cotter Pin; 3 X 15 mm, Cotter Pin; (A: With Single Scv) (B: With Dual Scv) 3.200 X 32 mm, Cotter Pin; (B) 3.200 X 32 mm, (Sub For M40461, This Application), Cotter Pin, Cotter Pin; 3.200 X 32 mm, (Sub For Ffsb108266) ( Ffsb110014 Not Used For This Application), Cotter Pin; 3.200 X 32 mm For Short Parallel Arms, Cotter Pin; 3.200 X 32 mm (Sub 11m7017), Cotter Pin; (312), Cotter Pin; 3.200 X 32 mm, (Use 6 With Vane Compactor, 4 Without Vane Compactor), Cotter Pin; 3.200 X 32 mm, 6-Row Narrow, Cotter Pin; 3.200 X 32 mm (Sub For 11***59), Cotter Pin; 3.200 X 32 mm (20 Ft (6 M)), Cotter Pin; (A: Mexico) (B: Turkey) 3.200 X 32 mm, Cotter Pin; 3.200 X 32 mm, (1 And 2 Scv), Cotter Pin; 3.200 X 32 mm, (Sub For Ffsb108266), Cotter Pin; 3,2 X 32 mm, Cotter Pin; 3.200 X 32 mm, None Used, Triple Scv, Cotter Pin; 3,2x32mm, Cotter Pin; 3.200 X 32 mm, 4-Row Narrow And 4-Row Wide, Cotter Pin; (A: 8520 (02***33- )) 3.200 X 32 mm, Cotter Pin; 3x15mm, Cotter Pin; 3.200 X 32 mm (Sub For 11h224), Cotter Pin; 3.200 X 32 mm, Cotter Pin; 3.200 X 32 mm (Sub 11m7083), Cotter Pin; (312) 3,2x32mm, Cotter Pin; 3.200 X 32 mm (Sub For 11m7059), Cotter Pin; 3x35mm, Cotter Pin; 3.200 X 32 mm (Sub For 0700014286), Cotter Pin; (A: Used In 5625hc Tractor Too) 3.200 X 32 mm, Cotter Pin; 3.200 X 32 mm, (Sub For M40461, This Application), Cotter Pin; (A) 3.200 X 32 mm, Cotter Pin; (A: Used In 5425 Orchard Tractor Too) 3.200 X 32 mm, Cotter Pin; (D: Up To Series 2109 ( -Xxxxxx), 2111 ( -Xxxxxx), 2113 ( -07***49), 2115 ( -07***25)) (E: Up To Series 2117 ( -07***35), 2122 ( -07***06), 2126 ( -07***10)) 3.200 X 32 mm, Cotter Pin; (Sub For Ffsb108266) ( Ffsb110014 Not Used For This Application), Cotter Pin; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 3.200 X 32 mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; (B: Dual Scv) 3.200 X 32 mm, Cotter Pin; 3.200 X 32 mm, ( Ffsb110014 Not Used For This Application)2
14***86Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-70***00) 9550sh (-70***00)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-70***00) & 9750sts (-70***00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Gauge Wheels ( - 1997)
11***24Cotter Pin; 1/8" X 1-1/4" (Sub 11m7017), Cotter Pin, Cotter Pin; 1/8" X 1-1/4", Cotter Pin; 1/8" X 1-1/4" (Sub 11m7017) (Sub H99923, This Application), Cotter Pin; 1/8" X 2"1
12***36Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00***27; 8650-00***32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)6
12***03Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70***00) 9550sh (-70***00)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 70***57-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-00***87; 4250-01***13; 4450-02***14) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-01***46; 4850-00***32) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-00***95; 4450-01***85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Gauge Wheels (1998 - )
11***24Cotter Pin; 1/8" X 1-1/4" (Sub 11m7017), Cotter Pin, Cotter Pin; 1/8" X 1-1/4", Cotter Pin; 1/8" X 1-1/4" (Sub 11m7017) (Sub H99923, This Application), Cotter Pin; 1/8" X 2"1
12***36Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00***27; 8650-00***32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)4
12***03Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70***00) 9550sh (-70***00)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 70***57-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-00***87; 4250-01***13; 4450-02***14) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-01***46; 4850-00***32) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-00***95; 4450-01***85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Grain Box - 6.1 M (20 Ft.) ( - 1997)
19***99Cap Screw; (A) 1/2" X 5-1/4" Hs, Sae 8, Cap Screw; (A) 1/2" X 5-1/4", Cap Screw; 1/2" X 5-1/4", Cap Screw; 1/2" X 5-1/4" Hs, Sae 8 (Less Reverser), Cap Screw; 1/2" X 5-1/4" (Hs, Sae 8), Cap Screw; 1/2" X 5-1/4", (With Two Spacers)2
21***26Screw; 5/16" X 7/8", (For 12-Bar Below Cam), Screw, Screw; 5/16" X 7/8", Screw; 5/16"X7/8", Screw; 5/16" X 7/8", 12-Bar, Below Cam, Screw; 5/16" X 7/8", (2 Used, Variable Drive; 4 Used, Regular And Long Fixed Drive), Screw; 5/16" X 7/8", (2 Used, Variable Drive; 4 Used, Long), Screw; 5/16" X 7/8" (Use With H76696)2
24***44Washer; 17/32" X 1-5/8" X 1/4", Washer; 17/32" X 1-5/8" X 1/4" (Sub For R42408, This Application), Washer; 17/32" X 1-5/8" X 1/4", Washer; 17/32" X 1-5/8" X 1/4", (Used On Endwise Transport Only), Washer; 17/32" X 1-5/8" X 1/4", (4 Used For 660 Single Chain, 8 Used For 680 And 660 Double Chain), Washer; 17/32" X 1-5/8" X 1/4", Auxiliary Hydraulic System, Washer, Washer; 17/32" X 1-5/8" X 1/4", (6" Spacing), Washer; 17/32" X 1-5/8" X 1/4", (Sub For R42408, This Application), Washer; 17/32" X 1-5/8" X 1/4" (Sub For Mg86520929)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Grain Box - 6.1 M (20 Ft.) (1998 - )
21***26Screw; 5/16" X 7/8", (For 12-Bar Below Cam), Screw, Screw; 5/16" X 7/8", Screw; 5/16"X7/8", Screw; 5/16" X 7/8", 12-Bar, Below Cam, Screw; 5/16" X 7/8", (2 Used, Variable Drive; 4 Used, Regular And Long Fixed Drive), Screw; 5/16" X 7/8", (2 Used, Variable Drive; 4 Used, Long), Screw; 5/16" X 7/8" (Use With H76696)2
24***51Washer; 9/16" X 1-1/2" X .164", Washer; 14.275 X 38.100 X 4.166 mm, Washer, Washer; 9/16"X1-1/2"X0.164", Washer; 9/16" X 1-1/2" X 0.164", (Use With N280690), Washer; 9/16" X 1-1/2" X 0.164" (Sub For Er046645 Appl), Washer; 9/16" X 1-1/2" X 0.164", Washer; (A) 14.275 X 38.100 X 4.166 mm, Washer; 9/16" X 1-1/2" X 0.164" (Use With N280690), Washer; 9/16" X 1-1/2" X 0.164" 4.8 X 13 mm (0.1890" X 0.5118"), Washer; 9/16" X 1-1/2" X 0.164" (Sub For 24h1790), Washer; 9/16" X 1-1/2" X 0.164", Washer; 9/16" X 1-1/2" X 0.164", (Sub For J217084), Washer; 9/16" X 1-1/2" X 0.164" Lh, Rh (Sub For 24h1790), Washer; 9/16" X 1-1/2" X 0.164" 4.8 X 13mm (0.1890" X 0.5118"), Washer; 9/16" X 1-1/2" X 0.164" (30") (38"), Washer; (A: Starting From Series Number 625 (06***44- ), 630 (06***34- )) 9/16" X 1-1/2" X 0.164", Washer; 9/16"X1-1/2"X.164"2
37***01Screw; No. 10 X 1/2, (Sub For N162946), Screw; No. 10 X 1/2", (Sub For N162946), Screw, Screw; (Sub For R44008), Screw; No. 10 X 1/2", Self-Tapping, (Sub For N162946), Screw; (Sub For R38373, Ar40938 Or R44008)8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Hitch And Lift Mast ( - 1997)
12***34Lock Washer; (A: Not Illustrated) 1", Lock Washer; 1" (B), Lock Washer; (A) 1", Lock Washer; (B: Quantities Shown Are For One Unit. Two Units Used Per Machine, Except Those Identified With An (A).) 1", Lock Washer; 1", (Rc), Lock Washer; 1", (Sub For A590924), Lock Washer; 1", Lock Washer; 25.400 mm (1"), Lock Washer; 1", (614), Lock Washer; 1", (814), Lock Washer; (C: Not Illustrated) 1", Lock Washer; (B) 1", Lock Washer; 1", (1 Or 2 Used), Lock Washer; 25.400 mm, (Sub For A590924), Lock Washer; 1", Lock Washer; 1", (Sub For A590924 And Ffsb103636), Lock Washer; 25.400 mm (1") (Sub For Ffsb103636)12
12***36Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00***27; 8650-00***32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)4
12***94Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Hitch And Lift Mast (1998 - )
34***57Spring Pin; 3/8" X 2-1/2", Spring Pin; 3/8" X 2-1/2" (Sub For R77131), Spring Pin; 3/8" X 2-1/2" (Use With A55422), Spring Pin; 3/8" X 2-1/2", Spring Pin; 3/8" X 2-1/2", (Sub For 25h607), Spring Pin; 3/8" X 2-1/2" (Sub 22h91, This Application And 14h732)3
A1***83Pin; (A: Hitch) (Cat-Ii), Pin; Hitch - Category 2, Pin; 36.530 X 279.400 mm, Pedal - Brake, L.H., Includes: Ref. 4, Pin, Pin; 36.530 X 279.400 mm Hitch - Cat Ii, Pedal - Brake, L.H., Inlcudes: Ref. 4, Pin; (B), Pin; 36.530 X 279.400 mm (1.438" X 11"), Pin; (Sub A24072, This Application), Pin; Use With 3-Point Hitch, Pin; Category 2 Or 32
A3***80Bushing; (D: For Category 3 And 3n Without Quick Coupler), Bushing; (B: Category Iii To Category Iv) 92mm(3.6"), Bushing; (C), Bushing; (Use With A24072) For 4440 Tractor With Category 3n/2 3-Point Hitch Less Quik-Coupler, Bushing, Bushing; (Use With A17383) For 4440 Tractor With Category 3n/2 3-Point Hitch Less Quik-Coupler, Bushing; (Used With A17383 For 4440 Tractors With Category 3n/2 3-Point Hitch Less Quik-Coupler), Bushing; (C: For Category 3 And 3n Without Quick Coupler), Bushing; (A: Used With A17383 For 4440 Tractors With Category 3n/2 3-Point Hitch L Ess Quik-Coupler), Bushing; For Tractors With Catagory 3n/2 Hitch Without Quik-Coupler, Bushing; 38.964 X 50.800 X 91.9998 mm, Bushing; (A: For 4440 Tractors With Category 3n/2 3-Point Hitch Less Quick Coupler) (Use With A17383), Bushing; 92 mm (3 5/8"), Bushing; (A: Category Iii/Ii W/O Quick Coupler), Bushing; 92 mm (3 5/8") (Adapt To Iv N), Bushing; (Category Iiin Or Category Ii Less Quick Coupler), Bushing; 38.964 X 50.800 X 91 mm (1.534" X 2" X 3.622") (Used With A17383 For 4440 Tractors With Category 3n/2 3-Point Hitch Less Quik-Coupler)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Left-Hand Inner End Panel Assembly - 6.1 M (20 Ft.) ( - 1997)
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)5
03***74Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.2
03***90Bolt; 5/16" X 1-1/2" (Use With N10213), Bolt; (A) 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2" 1/4 X 1/2, Bolt; 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2" (A), Bolt; 5/16" X 1-1/2", (Use With An190794, An190795, An190796 And An190797), Bolt; 5/16" X 1-1/2", (3-Joint Powerlines), Bolt; 5/16" X 1-1/2" (3 Joint Power Lines), Bolt; 5/16"X1-1/2", Bolt; 5/16" X 1-1/2", (French Only)3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Left-Hand Inner End Panel Assembly - 6.1 M (20 Ft.) (1998 - )
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)5
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)1
03***74Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Opener Down-Pressure Ratcheting Turnbuckle
A5***19Handle1
AM***98Pin Fastener, Pin Fastener; 1/4", (Sub For Gg220-25983)1
AN***30Jack; Ratchet (Sub For An230810), Jack, Jack; (Sub For An230810), Jack; Ratchet, Jack; Ratchet, (Sub For An230810), Jack; (Sub For Ae32694)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Opener Drawbar
11***24Cotter Pin; 1/8" X 1-1/4" (Sub 11m7017), Cotter Pin, Cotter Pin; 1/8" X 1-1/4", Cotter Pin; 1/8" X 1-1/4" (Sub 11m7017) (Sub H99923, This Application), Cotter Pin; 1/8" X 2"1
11***36Cotter Pin; 1/8" X 1", (6 Used On Standard Transmission) (4 Used On Hydrostatic Drive), Cotter Pin; (A) 1/8" X 1", Cotter Pin; 1/8" X 1" (A), Cotter Pin; 1/8" X 1", Cotter Pin, Cotter Pin; 1/8"X1", Cotter Pin; 1/8" X 1" 1/8" X 1", Cotter Pin; (B) 1/8" X 1", Cotter Pin; 1/8" X 1", (Sub For 11h236), Cotter Pin; (D) 1/8" X 1", Cotter Pin; 1/8" X 11
19***93Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69***00) 9550sh (-69***00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Platform And Parking Stand (1998- ) 4.6 M (15 Ft.) And 6.1 M (20 Ft.) (1998 - )
03***99Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)8
A3***1RPart Missing In Wise; (B), Part Missing In Wise; 1/8" Standard, Part Missing In Wise; Use With 1.83 M (6'), Part Missing In Wise; (Sub For 34h321), Part Missing In Wise; Use With 2.13 M (7'), Part Missing In Wise; (Sub A15146), Part Missing In Wise; (A: Category Ii), Part Missing In Wise; Plow Bolt, Part Missing In Wise; (Sub B15648), Part Missing In Wise; (Sub For Et11510), Part Missing In Wise; (Sub K40006), Part Missing In Wise; (Hydrostatic Drive), Part Missing In Wise; 17 mm X 121 mm, Part Missing In Wise; No. 10, Part Missing In Wise; (Use With Mt970), Part Missing In Wise; X, Part Missing In Wise; Spring Locking, Part Missing In Wise; Less Germany, Part Missing In Wise; (Sub For N2023m) (This Application Only), Part Missing In Wise, Part Missing In Wise; (Sub For L18955), Part Missing In Wise; Lock, Part Missing In Wise; (Sub B15646), Part Missing In Wise; (7' Hay Pickup), Part Missing In Wise; 30 Ft. And 25 Ft., Part Missing In Wise; (Pkg. Of 25), Part Missing In Wise; (To Hold Pt13386 Screw), Part Missing In Wise; (Sub For B15648, This Application), Part Missing In Wise; (Sub For Ty7014), Part Missing In Wise; Use With 1.68 M (5.5'), Part Missing In Wise; (Use With At336208), Part Missing In Wise; (Sub For 99m7085 Appl), Part Missing In Wise; (Category 2 Hitch), Part Missing In Wise; (Sub For J16931), Part Missing In Wise; .148" Dia. (Use With N11963), Part Missing In Wise; (Sub For Et11175), Part Missing In Wise; (Sub For Aa21292, This Application), Part Missing In Wise; 3/16", Part Missing In Wise; (Sub For Ce13819), Part Missing In Wise; (A), Part Missing In Wise; (Sub For Pt9194), Part Missing In Wise; (Use With Straight Drawbar), Part Missing In Wise; Use A3581r Or 11m7038, Part Missing In Wise; Cat I, Part Missing In Wise; (A: Used With Optional Double Twine Arm.), Part Missing In Wise; (B) (C), Part Missing In Wise; (Sub For F2830r), Part Missing In Wise; Use A3581r Or 11m70561
A6***58Channel; 10 Ft. Section,Walkboard, Channel; (A: Walkboard) (B: 10 Ft. Section)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Press Wheel Arms And Press Wheels
03***13Bolt; 1/4" X 1-3/4", Bolt; 1/4" X 1-3/4" (918, 920, 922-1 Used; 924, 925, 930-2 Used)6
03***88Bolt; (F: Rigid) M8 X 40, Bolt; M8 X 40 M8 X 40, Bolt, Bolt; (A) M8 X 40, Bolt; M8 X 40, Bolt; M8 X 40 (A), Bolt; M8 X 40 (Rd. Head), Bolt; (A: 9550 ( -69***00) 9550sh ( -69***00)) M8 X 40, Bolt; M8 X 40 (Square Neck)1
03***92Bolt; M10 X 30 (F), Bolt; (A: Only For 2.0 M Rotoflow Or Maxicut Pickup) M10 X 30, Bolt; (B: For Pickups With Auger Fingers) M10 X 30, Bolt; (B) M10 X 30, Bolt; M10 X 30 (493 - 6 Used; 594 - 8 Used; 693 - 10 Used; 1092 - 18 Used), Bolt; M10 X 30, Rear Bearings, Bolt; (A: Incld In Re255894 Display Bracket Assembly Kit) M10 X 30, Bolt; (Sub For E92363), Bolt; M10 X 30 Lh, Rh, Bolt; M10 X 30 Rear, Bolt; M10 X 30 (Hs, Head Marked 10.9), Bolt; (A) M10 X 30, Bolt; M10 X 30 North America, Bolt; M10 X 30 Rigid Platforms, Bolt; M10 X 30 Europe, Bolt; (A: Cab With 42.3 Gallon Fuel Tank) M10 X 30, Bolt; M10 X 30 (Use With E93472), Bolt; 10x1,5x30mm, Bolt; M10 X 30 Brace, Bolt; M10 X 30, (Fender), Bolt; (A) M10x30, Bolt; (A: With Net Wrapping) M10 X 30, Bolt; M10 X 30 M10x30, Bolt; (D: Heavy Duty Gudgeon W/3" Pin) M10 X 30, Bolt; (A: For France Only) M10 X 30, Bolt; (B: With Greenstar Display) M10 X 30, Bolt; M10 X 30, Bolt, Bolt; M10 X 30 (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925, 925 Flex Arg-8 Used; 930 And 930 Flex Arg-10 Used), Bolt; (A: (Xxxxxx-) 4055-01***43; 4255-01***95; 4455-02***89) M10 X 30, Bolt; M10 X 30 M10 X 30, Bolt; M10 X 30, Lh, Bolt; M10 X 30 (Sub For E92373), Bolt; M10 X 30 (Sub For E92363), Bolt; M10 X 30 Lh, Bolt; M10 X 30, (Used On 492 And 592), Bolt; (A: Sekura Cab - 3 Cylinder Tractors) M10 X 30, Bolt; M10 X 30 (493, 594, 693, 1290, 1291 And 1293), Bolt; M10 X 30, Up, Bolt; M10 X 30 (W/ 14m7296), Bolt; (B) M10x30, Bolt; M10 X 30 Intermediate Position Lh, Bolt; M10 X 30 (918, 920, 922, 925 And 930), Bolt; M10 X 30 (Fender), Bolt; M10 X 30 (693), Bolt; M10 X 30 Rockshaft Rows, Bolt; M10 X 30 M10 X 20, Bolt; M10x30, Bolt; M10 X 30 (Use With E92888), Bolt; M10 X 30 (Use With R255897), Bolt; (A: Only For 2, 0 M Rotoflow Or Maxicut Pickup) M10 X 30, Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10 X 30, Bolt; M10 X 30 Rear Bearings, Bolt; M10 X 30, (692e), Bolt; (A: With Net Coveredge) M10 X 30, Bolt; (Use With L114292), Bolt; M10 X 30 (With Airflow), Bolt; M10 X 30 (A), Bolt; M10 X 30 (Square Neck)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Parking Stand And Step ( - 1997)
14***26Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"3
19***68Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Model 12w And 16n, Cap Screw; 1/2" X 3-1/2", Cap Screw; 12.700 X 88.900 mm, Cap Screw; 1/2" X 3-1/2" (540 Rpm), Cap Screw; 1/2" X 3-1/2" (D), Cap Screw; 1/2" X 3-1/2", Incld In 5, Replace Pin In Lower Hinge With Bolt, Nut And Washer, Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Model 8w, 10w, 10n And 12n, Cap Screw; (K) 1/2" X 3-1/2", Cap Screw; 12.700 X 88.900 mm (1/2" X 3-1/2"), Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 3-1/2", (Hs, Sae 8) (Disk) (Use With N217396), Cap Screw; 1/2" X 3-1/2", Hs Sae 8, Cap Screw; 1/2" X 3-1/2" Incld In 1, Cap Screw; Hs, Sae 8, 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" Incld In 2, Cap Screw; 12.700 X 88.900 mm, Incld In 7, Cap Screw; 1/2" X 3-1/2" (Sub For Z49397)4
19***93Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69***00) 9550sh (-69***00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine5
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Platform And Parking Stand - 4.6 M (15 Ft.) And 6.1 M (20 Ft.) - 6.1 (20 Ft.) Ill. (1998 - )
A3***1RPart Missing In Wise; (B), Part Missing In Wise; 1/8" Standard, Part Missing In Wise; Use With 1.83 M (6'), Part Missing In Wise; (Sub For 34h321), Part Missing In Wise; Use With 2.13 M (7'), Part Missing In Wise; (Sub A15146), Part Missing In Wise; (A: Category Ii), Part Missing In Wise; Plow Bolt, Part Missing In Wise; (Sub B15648), Part Missing In Wise; (Sub For Et11510), Part Missing In Wise; (Sub K40006), Part Missing In Wise; (Hydrostatic Drive), Part Missing In Wise; 17 mm X 121 mm, Part Missing In Wise; No. 10, Part Missing In Wise; (Use With Mt970), Part Missing In Wise; X, Part Missing In Wise; Spring Locking, Part Missing In Wise; Less Germany, Part Missing In Wise; (Sub For N2023m) (This Application Only), Part Missing In Wise, Part Missing In Wise; (Sub For L18955), Part Missing In Wise; Lock, Part Missing In Wise; (Sub B15646), Part Missing In Wise; (7' Hay Pickup), Part Missing In Wise; 30 Ft. And 25 Ft., Part Missing In Wise; (Pkg. Of 25), Part Missing In Wise; (To Hold Pt13386 Screw), Part Missing In Wise; (Sub For B15648, This Application), Part Missing In Wise; (Sub For Ty7014), Part Missing In Wise; Use With 1.68 M (5.5'), Part Missing In Wise; (Use With At336208), Part Missing In Wise; (Sub For 99m7085 Appl), Part Missing In Wise; (Category 2 Hitch), Part Missing In Wise; (Sub For J16931), Part Missing In Wise; .148" Dia. (Use With N11963), Part Missing In Wise; (Sub For Et11175), Part Missing In Wise; (Sub For Aa21292, This Application), Part Missing In Wise; 3/16", Part Missing In Wise; (Sub For Ce13819), Part Missing In Wise; (A), Part Missing In Wise; (Sub For Pt9194), Part Missing In Wise; (Use With Straight Drawbar), Part Missing In Wise; Use A3581r Or 11m7038, Part Missing In Wise; Cat I, Part Missing In Wise; (A: Used With Optional Double Twine Arm.), Part Missing In Wise; (B) (C), Part Missing In Wise; (Sub For F2830r), Part Missing In Wise; Use A3581r Or 11m70562
A6***58Channel; 10 Ft. Section,Walkboard, Channel; (A: Walkboard) (B: 10 Ft. Section)1
A6***59Channel; 4.6 M (15 Ft.) Walkboard, 2-1/2 Ft. Section, Channel; (A: Walkboard) (C: 2-1/2 Ft. Section) 4.6 M (15 Ft.), Channel; 4.6 M (15 Ft.) 2-1/2 Ft. Section, Walkboard2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Platform And Steps - 4.6 M (15 Ft.) ( - 1997)
14***85Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00***30; 8760-00***21) 5/16", Nut; (A: (-Xxxxxx) 4650-01***35) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-00***45; 4250-01***92; 4450-02***58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"5
19***49Cap Screw; 5/16" X 2-1/2", Rear Hole, Cap Screw; (A) 5/16" X 2-1/2", Cap Screw, Cap Screw; 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", , For 8-W And 8-N, Cap Screw; (A: 2 Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (Use With Kv23196), Cap Screw; 5/16" X 2-1/2", (Use With R123953, R128867 Or R133136), Cap Screw; 5/16" X 2-1/2" (Use With 12h303 And 14h785), Cap Screw; 5/16" X 2-1/2", (Sub For Mg88346), Cap Screw; 7.925 X 63.500 mm (5/16" X 2-1/2"), Cap Screw; 5/16" X 2-1/2" 5/16" X 2-1/2", Cap Screw; (A: 2 Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (With Harvestrak-Adj), Cap Screw; 5/16"X2-1/2", Cap Screw; 5/16" X 2-1/2" (Use With R123953, R128867 Or R133136), Cap Screw; (A: (2) Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (-), Cap Screw; (B) 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", For 12n, Cap Screw; 5/16" X 2-1/2", For 4w, 6n, 6w, Cap Screw; 5/16" X 2-1/2" (Use With R133136), Cap Screw; 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", (950, 1050 Tractor), Cap Screw; 5/16" X 2-1/2", (Use With Kv23196)5
19***68Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Model 12w And 16n, Cap Screw; 1/2" X 3-1/2", Cap Screw; 12.700 X 88.900 mm, Cap Screw; 1/2" X 3-1/2" (540 Rpm), Cap Screw; 1/2" X 3-1/2" (D), Cap Screw; 1/2" X 3-1/2", Incld In 5, Replace Pin In Lower Hinge With Bolt, Nut And Washer, Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Model 8w, 10w, 10n And 12n, Cap Screw; (K) 1/2" X 3-1/2", Cap Screw; 12.700 X 88.900 mm (1/2" X 3-1/2"), Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 3-1/2", (Hs, Sae 8) (Disk) (Use With N217396), Cap Screw; 1/2" X 3-1/2", Hs Sae 8, Cap Screw; 1/2" X 3-1/2" Incld In 1, Cap Screw; Hs, Sae 8, 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" Incld In 2, Cap Screw; 12.700 X 88.900 mm, Incld In 7, Cap Screw; 1/2" X 3-1/2" (Sub For Z49397)8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Platform And Steps - 6.1 M (20 Ft.) ( - 1997)
14***85Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00***30; 8760-00***21) 5/16", Nut; (A: (-Xxxxxx) 4650-01***35) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-00***45; 4250-01***92; 4450-02***58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"5
19***49Cap Screw; 5/16" X 2-1/2", Rear Hole, Cap Screw; (A) 5/16" X 2-1/2", Cap Screw, Cap Screw; 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", , For 8-W And 8-N, Cap Screw; (A: 2 Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (Use With Kv23196), Cap Screw; 5/16" X 2-1/2", (Use With R123953, R128867 Or R133136), Cap Screw; 5/16" X 2-1/2" (Use With 12h303 And 14h785), Cap Screw; 5/16" X 2-1/2", (Sub For Mg88346), Cap Screw; 7.925 X 63.500 mm (5/16" X 2-1/2"), Cap Screw; 5/16" X 2-1/2" 5/16" X 2-1/2", Cap Screw; (A: 2 Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (With Harvestrak-Adj), Cap Screw; 5/16"X2-1/2", Cap Screw; 5/16" X 2-1/2" (Use With R123953, R128867 Or R133136), Cap Screw; (A: (2) Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (-), Cap Screw; (B) 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", For 12n, Cap Screw; 5/16" X 2-1/2", For 4w, 6n, 6w, Cap Screw; 5/16" X 2-1/2" (Use With R133136), Cap Screw; 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", (950, 1050 Tractor), Cap Screw; 5/16" X 2-1/2", (Use With Kv23196)5
19***68Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Model 12w And 16n, Cap Screw; 1/2" X 3-1/2", Cap Screw; 12.700 X 88.900 mm, Cap Screw; 1/2" X 3-1/2" (540 Rpm), Cap Screw; 1/2" X 3-1/2" (D), Cap Screw; 1/2" X 3-1/2", Incld In 5, Replace Pin In Lower Hinge With Bolt, Nut And Washer, Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Model 8w, 10w, 10n And 12n, Cap Screw; (K) 1/2" X 3-1/2", Cap Screw; 12.700 X 88.900 mm (1/2" X 3-1/2"), Cap Screw; 1/2" X 3-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 3-1/2", (Hs, Sae 8) (Disk) (Use With N217396), Cap Screw; 1/2" X 3-1/2", Hs Sae 8, Cap Screw; 1/2" X 3-1/2" Incld In 1, Cap Screw; Hs, Sae 8, 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" Incld In 2, Cap Screw; 12.700 X 88.900 mm, Incld In 7, Cap Screw; 1/2" X 3-1/2" (Sub For Z49397)8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Rockshaft - 4.6 M (15 Ft.)
03***01Bolt; 5/8" X 1-3/4", 4020 Or 4010 Tractor, Bolt; (A) 5/8" X 1-3/4", Bolt; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8" X 1-3/4", Bolt; 5/8" X 1-3/4", Bolt; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8" X 1-3/4", Bolt; 5/8" X 1-3/4", With B31967 In Lowest Position, Bolt; 5/8" X 1-3/4", (Sub For (4) 03h1652) (A), Bolt, Bolt; (Regular)2
08***45Cap Screw; 3/4" X 8-1/2" (7 X 7 Frame), Cap Screw; 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", Hs Sae 8, Cap Screw; (A: 10 Foot) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2" (5 X 7 Frame - Safety Trip), Cap Screw; 3/4" X 8-1/2" (For 7 X 7 Frame), Cap Screw; 3/4" X 8-1/2" (5 X 7 Frame) (Safety Trip), Cap Screw; (B: With Front Weight Bracket) 3/4" X 8-1/2" (4840 Tractors), Cap Screw; (C) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2" (Use With N130590), Cap Screw; 3/4" X 8-1/2", Hs Sae 8 (For 23, 25, 27-Foot Machines), Cap Screw; (E: For 7 X 7 Frame) 3/4" X 8-1/2"2
12***94Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Rockshaft - 6.1 M (20 Ft.)
03***01Bolt; 5/8" X 1-3/4", 4020 Or 4010 Tractor, Bolt; (A) 5/8" X 1-3/4", Bolt; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8" X 1-3/4", Bolt; 5/8" X 1-3/4", Bolt; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8" X 1-3/4", Bolt; 5/8" X 1-3/4", With B31967 In Lowest Position, Bolt; 5/8" X 1-3/4", (Sub For (4) 03h1652) (A), Bolt, Bolt; (Regular)4
08***45Cap Screw; 3/4" X 8-1/2" (7 X 7 Frame), Cap Screw; 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2", Hs Sae 8, Cap Screw; (A: 10 Foot) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2" (5 X 7 Frame - Safety Trip), Cap Screw; 3/4" X 8-1/2" (For 7 X 7 Frame), Cap Screw; 3/4" X 8-1/2" (5 X 7 Frame) (Safety Trip), Cap Screw; (B: With Front Weight Bracket) 3/4" X 8-1/2" (4840 Tractors), Cap Screw; (C) 3/4" X 8-1/2", Cap Screw; 3/4" X 8-1/2" (Use With N130590), Cap Screw; 3/4" X 8-1/2", Hs Sae 8 (For 23, 25, 27-Foot Machines), Cap Screw; (E: For 7 X 7 Frame) 3/4" X 8-1/2"2
12***94Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"24
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Right-Hand Inner End Panel Assembly - 4.6 M (15 Ft.) Illustrated ( - 1997)
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)5
03***74Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.2
03***90Bolt; 5/16" X 1-1/2" (Use With N10213), Bolt; (A) 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2" 1/4 X 1/2, Bolt; 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2" (A), Bolt; 5/16" X 1-1/2", (Use With An190794, An190795, An190796 And An190797), Bolt; 5/16" X 1-1/2", (3-Joint Powerlines), Bolt; 5/16" X 1-1/2" (3 Joint Power Lines), Bolt; 5/16"X1-1/2", Bolt; 5/16" X 1-1/2", (French Only)3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Right-Hand Inner End Panel Assembly - 4.6 M (15 Ft.) Illustrated (1998 - )
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)5
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)1
03***74Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Right-Hand Inner End Panel Assembly - 6.1 M (20 Ft.) ( - 1997)
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)5
03***74Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.2
03***90Bolt; 5/16" X 1-1/2" (Use With N10213), Bolt; (A) 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2" 1/4 X 1/2, Bolt; 5/16" X 1-1/2", Bolt; 5/16" X 1-1/2" (A), Bolt; 5/16" X 1-1/2", (Use With An190794, An190795, An190796 And An190797), Bolt; 5/16" X 1-1/2", (3-Joint Powerlines), Bolt; 5/16" X 1-1/2" (3 Joint Power Lines), Bolt; 5/16"X1-1/2", Bolt; 5/16" X 1-1/2", (French Only)3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Right-Hand Inner End Panel Assembly - 6.1 M (20 Ft.) (1998 - )
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)5
03***64Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040)2
03***74Bolt; (C: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (B: Amber Warning Light Assembly) 5/16" X 5/8", Bolt; 5/16" X 5/8" Less Grain Agitator Attachment, Bolt; (A) 5/16" X 5/8", Bolt; 5/16" X 5/8" (A), Bolt; 5/16" X 5/8", Bolt; 5/16" X 5/8" (Use With 12h303 And 14h785), Bolt; (A: Field Installed Option) 5/16" X 5/8", Bolt; (W) 5/16" X 5/8", Bolt; 5/16"X5/8", Bolt; 5/16" X 5/8" Short Neck, Bolt; 5/16" X 5/8", (2.7 M (9-Ft.), 3.1 M (10-Ft.), 3.3 M (11-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Bolt; 5/16" X 5/8" (Use With 14h785), Bolt; (B: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; (D: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt; 5/16" X 5/8" (Without Air Conditioning), Bolt; (A: Less Grain Agitator Attachment) 5/16" X 5/8", Bolt, Bolt; 5/16" X 5/8", (Sub For Mg280647), Bolt; 5/16" X 5/8", (Use With 12h303 And 14h785), Bolt; 5/16" X 5/8", Rd. Hd.2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Slow Moving Vehicle (Smv) Emblem And Mounting Brackets
14***86Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-70***00) 9550sh (-70***00)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-70***00) & 9750sts (-70***00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"2
24***88Washer; 9/32" X 1" X 1/16" Rh, Washer; 9/32" X 1" X 1/16" Lh, Washer; 9/32" X 1" X 1/16" 6.1 M (20 Ft. ), Washer; 9/32" X 1" X 1/16", (84 Used For 714, 714a; 98 Used For 716, 716a), Washer; 9/32" X 1" X 1/16", (56 Used For 714, 714a; 64 Used For 716, 716a), Washer; 9/32" X 1" X 1/16" (Use With N221377), Washer; (A: For Front And Sides) 9/32" X 1" X 1/16", Washer; 7.137 X 25.400 X 1.600 mm, Washer; (A) 9/32" X 1" X 1/16", Washer; 9/32" X 1" X 1/16" For Auger Shaft, Washer; (A) 7.137 X 25.400 X 1.600 mm, Washer; 9/32" X 1" X 1/16", Washer; 9/32" X 1" X .060", Washer; 9/32" X 1" X 1/16" 6.1 M (20 Ft.) Only, Washer; (B) 9/32" X 1" X 1/16", Washer, Washer; 9/32" X 1" X 1/16" (Except Europe), Washer; 9/32" X 1" X 1/16", Washer; 9/32"X1"X0.060", Washer; (C) 9/32" X 1" X 1/16", Washer; 9/32"X1"X.060", Washer; 9/32" X 1" X 1/16", (Except Europe), Washer; 9/32" X 1" X 1/16", (244, 5 Used; 344, 10 Used)8
A5***24Bracket1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Safety Decals
A5***11Sign; (Danger), Sign; 6.1 M (20 Ft.) Only "Danger"; Located On Front, Sign; (C: Danger), Sign; 6.1 M (20 Ft.) Only, "Danger"; Located On Front, Sign; Danger-Electric Shock, Sign; (Sub For H136407) "Danger" - Located On Marker Wings, Sign; (F: Danger), Sign; (B: Danger), Sign; "Danger" - Located On Marker Wings, Sign; "Danger" - Located On Main Frame, Sign; 6.1 M (20 Ft.) "Danger"; Located On Front Of Drill, Sign; (D: Danger), Sign; "Danger", Sign; Danger - Electrical, Sign; (D: Danger) Danger, Sign, Sign; "Danger" - Located On Fold Down Markers, Sign; (A: Danger) (B: Located On Marker Wings)1
A6***53Decals, Decals; (A: English), Decals; "Warning"; Located On Each End Panel, Decals; (A: Warning), Decals; "Warning"2
A6***35Decals; A, B, Decals, Decals; "Warning", Decals; French "Warning"; Located On Each End Panel, Decals; (A), Decals; French - "Warning" - Located On Each End Panel, Decals; A2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Track Eradicator
03***82Bolt; 12.700 X 95.250 mm (1/2" X 3-3/4"), Bolt; 1/2" X 3-3/4", Bolt; 12.700 X 95.250 mm (1/2" X 3-3/4") (1253a)0
14***76Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-01***34; 4850-00***87) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-32***15; 4850-32***46) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-00***51; 4255-00***13; 4455-00***27) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-00***19; 8650-00***98) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-01***03;4955-01***24) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-00***87; 4255-00***81; 4455-01***58) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-00***31; 4250-00***42; 4450-02***66) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -32***23 (5310) -33***88) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -32***21 (5310) -33***91) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 32***24- (5310) 33***89-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 80
24***05Washer; 13/32" X 13/16" X 0.065" (Use With Skid Plate), Washer; (E: (Xxxxxx- ) 4050-00***07; 4250-01***82; 4450-02***30) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Sub For Mg272311), Washer; 13/32" X 13/16" X 0.065", (10 Used, Variable Drive; 16 Used, Long), Washer; 13/32" X 13/16" X 0.065", (16.5l X 16.1 Tires), Washer; 13/32" X 13/16" X 0.065" (5 Used, Belt Drive; 7 Used, Hydrostatic Drive), Washer; 13/32" X 13/16" X 0.065", (Level Land), Washer; 11/32"X13/16"X0.06", Washer; (A: Floor To Control Support) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Appl), Washer; 13/32" X 13/16" X 0.065" (2 Used (A)) (4 Used (B)), Washer; 13/32" X 13/16" X 0.065" 13/32" X 13/16" X .060", Washer; Use With E52386, Washer; 13/32" X 13/16" X 0.060", Washer; (C) 13/32"X1".060", Washer; 13/32" X 13/16" X 0.065" To Secure Battery Cables To Frame, Washer; 13/32" X 13/16" X 0.065" (Rh Side), Washer; 13/32" X 13/16" X 0.065" 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Sidehill), Washer; 13/32" X 13/16" X 0.065", (Code 6403), Washer; 13/32" X 13/16" X 0.60", Washer; (A: Quad-Range Transmission) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Use With Re28954 Or Re37689), Washer; 13/32" X 13/16" X 0.065" (Use With Skid Plates), Washer; (A) 13/32" X 13/16" X 0.065", (Sub For T17444), Washer; X X (A), Washer; 13/32" X 13/16" X 0.065" (218, 220, 222, 224 And 230) (Use With H95175), Washer; 13/32" X 13/16" X 0.065" (Appl), Washer; 13/32" X 13/16" X 0.065", (675b) (Sub For Mg87016), Washer; 13/32" X 13/16" X 0.065" (854a,62***64-; 1253a,62***12-), Washer; 13/32" X 13/16" X 0.065" (Gasoline), Washer; (A) 13/32" X 13/16" X 0.065", (Sub For Et10702), Washer; 13/32"X13/16"X.060, Washer; 13/32" X 13/16" X 0.065", Washer; (E), Washer; (A), Washer; 13/32" X 13/16" X 0.065" (Use With R110147), Washer; (A: For 9650 Cts Combine (69***10- )) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Dn-02), Washer; Ar, 13/32" X 13/16" X 0.6", Washer; 13/32" X 13/16" X 0.065" (8 Used, "In Position"; 7 Used, "Out Position"), Washer; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 13/32" X 13/16" X 0.065", Washer; 3/8"X3/4".060", Washer; 13/32" X 13/16" X 0.065" Lh, Washer; 10.312 X 20.625 X 1.651 mm (13/32" X 13/16" X 0.065"), Washer; 13/32" X 13/16" X 0.065", (Use With 19h2284), Washer; 13/32" X 13/16" X .060", Washer; (A) 13/32"X13/16"X0.065", Washer; Grounding Straps To Frame, Washer; 13/32" X 13/16" X 0.065" (Tether), Washer; (A: W/O Sound-Gard Body) 13/32" X 13/16" X 0.065", Washer; 13/32x13/16"X.060", Washer; 13/32" X 13/16" X 0.065" (No Longer Required), Washer; 13/32" X 13/16" X 0.065" (A), Washer; 13/32" X 13/16" X 0.065" Rh, Washer; 13/32" X 13/16" X 0.065" (Sgb), Washer; (A: Not Used In U.S. And Canada) 13/32" X 13/16" X 0.065" (Use With Al27269), Washer; 13/32" X 13/16" X 0.065" (918, 920, 922, 924, 925 And 930) (Use With H129024), Washer; 13/32" X 13/16" X 0.065" (Use With 19h2284), Washer; 13/32" X 13/16" X 0.065", (Less Cab) (3 Used With Cab), Washer; 13/32"X13/16"X0.065", Washer; 13/32" X 13/16" X 0.065", (Sub For C744dn), Washer; 13/32" X 13/16" X 0.065", (4 Or Less Used), Washer; 13/32" X 13/16" X 0.065", (Use With T142647), Washer; 13/32" X 13/16" X 0.065", (Alternator To Dash), Washer; 13/32" X 13/16" X 0.065", (Option 3101, 3102, 3103), Washer; 13/32"X13/16"X.060", Washer; 13/32' X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Use With 19h2284 And 19h1732), Washer; 13/32" X 13/16" X 0.065", (Code 3503), Washer; (A) (B) (C) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065" (Belt Drive), Washer; (K: At100208 Linkage - No Longer Available (Includes At101913, At106687, C1067r, M84972, T100992,) 13/32" X 13/16" X 0.065", Washer; (B) 13/32"X13/16"X.060", Washer; (A) (B) (C) (D) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065" (4 Or Less), Washer; 13/32" X 13/16" X 0.065", (Use With Ah108840), Washer; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 13/32" X 13/16" X 0.065", Washer; 13/32"X13/16"X0,06", Washer; (A: For 9650 Combine (69***07- ) Also Serial Nos. 69***94, 69***95, 69***01, 69***02 And 69***05.) 13/32" X 13/16" X 0.065", Washer; 13/32"X3/16"X.060", Washer; 13/32" X 13/16" X 0.065", (Use With 19h1726), Washer; 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (2 Nominal), Washer; 13/32" X 13/16" X 0.065" (854a,-62***63; 1253a,-62***11), Washer; 13/32" X 13/16" X 0.065" (Qrt), Washer; 13/32" X 13/16" X 0.065", (Modified 5200 And 5400), Washer; 3/8"X3/4"X.060, Washer, Washer; X X 13/32" X 13/16" X .060", Washer; 13/32"X13/16"X0.60", Washer; (D: (Xxxxxx- ) 4050-00***52; 4250-01***91; 4450-02***29) 13/32" X 13/16" X 0.065", Washer; 10.312 X 20.625 X 1.651 mm (13/32" X 13/16" X 0.065"), Washer; 13/32" X 13/16" X 0.065" Ar, Washer; 13/32" X 13/16" X 0.065" (5 Used-Belt Drive; 7 Used-Hydrostatic Drive), Washer; (A: ( -Xxxxxx) 7710-00***27; 7810-00***92) 13/32" X 13/16" X 0.065", Washer; (A) 13/32"X13/16"X.060", Washer; .060" X 13/32" X 13/16", Washer; 13/32" X 13/16" X 0.065" (Use With 19h1726), Washer; 13/32" X 13/16" X 0.065" Brazil Only, Washer; Ar, 13/32" X 13/16" X 0.120", Washer; (A) (B) 10.312 X 20.625 X 1.651 mm (13/32" X 13/16" X 0.065"), Washer; 13/32" X 13/16" X 0.065" (Sub For R57696), Washer; 13/32" X 13/16" X 0.065", (8 Used, "In Position"; 7 Used, "Out Position"), Washer; 3/8"X3/4"X.060", Washer; (B) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Use With R110147), Washer; 13/32"X13/16"X.065", Washer; 15/32"X1"X.060", Washer; 13/32" X 13/16" X 0.065" (Rh), Washer; 13/32" X 13/16" X .060, Washer; 13/32" X 13/16" X 0.065" (16.5 X 16) Tires, Washer; 13/32" X 13/16" X 0.065" (Nlr), Washer; 13/32" X 13/16" X 0.065", (Use With 19h2552), Washer; 13/32"X1-13/16"X.060", Washer; (D: (Xxxxxx- ) 4650-01***64; 4850-01***64) 13/32" X 13/16" X 0.065", Washer; (A) 13/32" X 13/16" X .060", Washer; (A: W/O Sgb) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065" (14 Used, 18'; 18 Used, 20'), Washer; 13/32" X 13/16" X 0.065" (Use With Re71147 Or R129875), Washer; 13/32" X 13/16" X 0.065", (Not Required With E55662), Washer; 13/32"X1"X.060", Washer; 13/32" X 13/16" X 0.065", (Code 6401), Washer; 25/64"X7/8"X.060", Washer, Washer; (B: (Xxxxxx- )4560-00***28;4760-00***51;4960-00***55) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Use With 19m7402), Washer; (A) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (20 Used, Variable Drive; 24 Used, Long), Washer; (A) 13/32x13/16"X0.065", Washer; (D), Washer; (A) (B) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.06", Ar, Washer; (A: Germany) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065" Rear, Lh, Washer; 13/32"X13/16", Washer; 13/32" X 13/16" X 0.065", (675) (Sub For Mg87016), Washer; 25/64"X7/8"X.075", Washer; 13/32"X13/16"X0.060", Washer; 13/32" X 13/16" X 0.065", Code 2805 And Code 2811, Washer; 13/32" X 13/16" X 0.065" (930 Flex Arg), Washer; (B: (Xxxxxx- ) Serial No. 8450-00***49; 8650-00***91) 13/32" X 13/16" X 0.065", Washer; (A: Not Used In U.S. And Canada) (C: (Xxxxxx- ) 4650-01***20; 4850-01***82) 13/32" X 13/16" X 0.065" (Use With Al27269), Washer; 13/32" X 13/16" X 0.065" (Use With 19m7402), Washer; (D: (Xxxxxx- ) 4050e-00***62; 4250e-01***79) 13/32" X 13/16" X 0.065" (Use With Al27269), Washer; 13/32" X13/16" X .060", Washer; (B: (Xxxxxx- )4755-01***04;4955-01***25) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Sub For Mg87016), Washer; 13/32" X 13/16" X 0.065", (20 Used, Regular And Variable Drive; 24 Used, Long), Washer; 13/32" X 13/16" X 0.065" (11'5" - 15'0"), Washer; 13/32" X 13/16" X 0.065", (Sub For Gg400-32404), Washer; (C) 13/32" X 13/16" X 0.065", Washer; 10.312 X 20.625 X 1.651 mm, Washer; (B) 13/32"X13/16"X0.065", Washer; 13/32" X 13/16" X 0.065" (Diesel), Washer; 13/32" X 13/16" X 0.065", Code 2805, Washer; 13/32"X13/16"X.060" (Sub For 24h154), Washer; 13/32" X 13/16" X 0.065" Engine Driven Fans Only0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Frame : Text Free Labels And Decals
A8***30Label, Label; Max Transport Speed 32, Label; (C: Max Transport Speed), Label; (Max.Transport Speed), Label; (D: Text Free)1
A8***35Label; Inhale Risk, Label, Label; (D: Inhale Risk)1
A8***25Label; Falling Implement, Label, Label; (E: Textless)1
See all parts with full part numbers in Heavy Parts AI →
Hydraulic
John Deere : 1520 - Drill, Grain : Hydraulic : Hydraulic Down Pressure Cylinder - 6.1 M (20 Ft.) Only - 63 Mm X 203 Mm (2-1/2" X 8") ( - 1997)
AH***22Seal Kit; 2.75" (Use With Ah212777), Seal Kit; 2.75" X 12", Seal Kit; (Includes Parts Marked (A)), Seal Kit; Seal Kit For Ah206751 And Ah212766, Seal Kit; (Use With Ah176890 And Ah212776), Seal Kit; (Use With Ah207760) Includes An260222 Piston Seal Kit, Seal Kit; (Use With Ah176850 Or Ah176842), Seal Kit; (Use With Ah176849 And Ah176850), Seal Kit, Seal Kit; (A: Seal), Seal Kit; (Use With Ah212777) Includes An260222 Piston Seal Kit, Seal Kit; (Use With Ah176370), Seal Kit; (Use With Ah206751), Seal Kit; (Use With Ah176842 And Ah176841), Seal Kit; (Use With Ah176850 And Ah176849)1
AH***90Hydraulic Cylinder, Hydraulic Cylinder; (Sub For Aa41238), Hydraulic Cylinder; 2-1/2" X 8", Hydraulic Cylinder; 63 X 203 mm (2-1/2" X 8") (Sub For Aa41238)1
H1***27Snap Ring1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Hydraulic Down Pressure Cylinder - 6.1 M (20 Ft.) Only - 63 Mm X 203 Mm (2-1/2" X 8") (1998 - )
14***76Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-01***34; 4850-00***87) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-32***15; 4850-32***46) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-00***51; 4255-00***13; 4455-00***27) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-00***19; 8650-00***98) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-01***03;4955-01***24) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-00***87; 4255-00***81; 4455-01***58) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-00***31; 4250-00***42; 4450-02***66) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -32***23 (5310) -33***88) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -32***21 (5310) -33***91) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 32***24- (5310) 33***89-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 89
15***66Pipe Plug; 3/8" (Floor Plate) (Optional), Pipe Plug; 3/8", (Use With Re31299) (Without Turbocharger), Pipe Plug; 3/8", (Sub For Ch15002), Pipe Plug, Pipe Plug; Sq. Hd., 3/8", Pipe Plug; 3/8", (Use With R89790), Pipe Plug; (A) 3/8", (One Not Used W/ Re20889), Pipe Plug; 3/8" 3/8''-18nptf, Threads With Pre-Applied Sealant, Filets Enduits De Produit D'Etancheite, Mit Dichtmittel, Con Materiale Di Tenuta, Con Sellador, Med Taetningsmedel, Pipe Plug; 3/8", (Sub For R47395), Pipe Plug, Pipe Plug; 3/8" Front, Pipe Plug; 3/8" 3/8"-18 Npt, Pipe Plug; 3/8", Hex Ctsk., 3/4", Pipe Plug; 3/8" (One Not Used With Re20889), Pipe Plug; 3/8" (Use With Ar54556), Pipe Plug; 3/8", (Use With At16133), Pipe Plug; 3/8" 3/8"-18npt (Ord 15h695) With Square Head, Pipe Plug; 3/8" (Dn-03), Pipe Plug; 3/8" (4640, 4840), Pipe Plug; 3/8", Pipe Plug; 3/8" 3/8"-18npt Or Ord 15h695 = With Square Head, Pipe Plug; 3/8" (Bottom Of Intake Manifold, Pipe Plug; 3/8", Pipe Plug; (Use With Re31299) 3/8" (Without Turbocharger), Pipe Plug; (Bottom Of Intake Manifold), Pipe Plug; 9.525 mm (3/8"), Pipe Plug; 3/8", (Sub For Mg508010 Or 15h563), Pipe Plug; 3/8", (Not Used Appl), Pipe Plug; (A) 3/8", (Use 1 With R43851 Or R63285), Pipe Plug; (D) 3/8", Pipe Plug; 3/8", (Use With At206990), Pipe Plug; 3/8", Sq. Hd., Pipe Plug; (A) 3/8", Pipe Plug; 3/8", (Use With R108970), Pipe Plug; 3/8", (Sub For 15h563), Pipe Plug; 3/8" 3/8"-18npt, Pipe Plug; 3/8" (Sub For P45809), Pipe Plug; 3/8" (Front), Pipe Plug; 3/8", (Sub For P45809), Pipe Plug; 3/8", (Use With Ar54556), Pipe Plug; 3/8" 3/8"-18npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Bottom Of Intake Manifold), Pipe Plug; 3/8", Without Turbocharger, Pipe Plug; 3/8", (Front), Pipe Plug; (Use With R108970), Pipe Plug; 3/8" (Not Used Appl), Pipe Plug; 3/8" 3/8"-18 Npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Use With R104592, R134429 And 15h690), Pipe Plug; 3/8", (Use With At210378), Pipe Plug; 3/8" (Use With R89790), Pipe Plug; 3/8", (Less Starting Aid), Pipe Plug; 3/8", (Front), Pipe Plug; 3/8", Hex. Ctsk., Pipe Plug; (A: Threads With Pre-Applied Sealant) 3/8" 3/8''-18 Nptf1
19***65Cap Screw; (A) 3/8"X3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4") Longitud=95.5mm (3.76") Frente=M10, Cap Screw; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8" X 1-3/4", Cap Screw; (A: Quad-Range Transmission) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Sub For H2783b), Cap Screw; 3/8" X 1-3/4", (2 Used Single) (4 Used Dual), Cap Screw; 3/8" X 1-3/4" (Use With O.And S.), Cap Screw; (A: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Rear Hitch Option), Cap Screw; 3/8" X 1-3/4", (Na-G, Na-L), Cap Screw; (B) 3/8"X1-3/4", Cap Screw; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Chrysler No. 17***45), Cap Screw, Cap Screw; (A) (C) 3/8" X 1-3/4", (Use With Ar45483), Cap Screw; (K) 3/8" X 1-3/4", Cap Screw; (B: Hi-Crop) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", For 5 Section, Cap Screw; 3/8" X 1-3/4", (Ea-G, Ge-01), Cap Screw; 3/8" X 1-3/4", (Ea-G, Hb-G, Ge-01, Gh-01), Cap Screw; 3/8" X 1-3/4", (Illustrated), Cap Screw; 3/8" X 1-3/4", Code 2309 And 2310, Cap Screw; 3/8" X 1-3/4" (Use With C11812 And K36707), Cap Screw; 3/8" X 1-3/4", (100 Per Package) (Sub For Mg88428), Cap Screw; (C: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (4010 And 4320), Cap Screw; 3/8" X 1-3/4", (Use With 12h304 And 14h1076), Cap Screw; 3/8" X 1-3/4", (Use With R58717), Cap Screw; 3/8" X 1-3/4" (Use With Ae24403), Cap Screw; 3/8" X 1-3/4", (Beet, Bean And Vegetable), Bolt, Cap Screw; 3/8" X 1-3/4", (Na-D), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (2 Used, A) (1 Used, B), Cap Screw; 3/8" X 1-3/4", For 915, Cap Screw; 3/8" X 1-3/4", For Spike-Tooth Sections, Cap Screw; 3/8"X1-3/4", Cap Screw; (B: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4", Cap Screw; 3/8"X1-3/8", Cap Screw; (A: ( -Xxxxxx) 7710-00***27; 7810-00***92) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Sae 8), Cap Screw; 2/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4" (Use With Bp12233), Cap Screw; 3/8" X 1-3/4", (2 Used Syncro-Range) (1 Used Power Shift), Cap Screw; (B), Cap Screw; 3/8" X 1-3/4", (Sub (2) 24h1309), Cap Screw; 3/8" X 1-3/4", Low, Cap Screw; (A: 2 Used Dual, 2 Used Triple) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With 14h812), Cap Screw; 3/8" X 1-3/4" (Use With 14h812), (Adjustable Rear Axle), Cap Screw; (A) 3/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Code 6401), Cap Screw; 3/8" X 1-3/4", (For An152412 Shield), Cap Screw; (A) (C) 3/8" X 1-3/4", (Fuel), Cap Screw; 3/8" X 1-3/4", (Notch Filler-Each Side), Cap Screw; 3/8" X 1-3/4" (With Dial-A-Matic), Cap Screw; 3/8" X 1-3/4", (Power Shift), Cap Screw; 3/8" X 1-3/4", Code 2306 And 2307, Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4"), Cap Screw; 3/8" X 3/4", Cap Screw; (A) 3/8" X 1-3/4", Cap Screw; (A: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (D) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; 3/8" X 1-3/4" (Hi-Crop), Cap Screw; 3/8" X 1-3/4" 3/8 Unc-2a X 1 3/4 A17d Zn, Cap Screw; 3/8" X 1-3/4" (Without Dial-A-Matic), Cap Screw; 3/8" X 1-3/4" (100 Per Package) (Sub For Mg88428), Cap Screw; (B) 3/8" X 1-3/4", (Sub For T16517), Cap Screw; 3/8" X 1-3/4", (Sae 8), Cap Screw; (A), Cap Screw; 3/8" X 1-3/4", (Less Rockshaft), Cap Screw; 3/8"X1", Cap Screw; 3/8" X 1-3/4" (Differential Lock), Cap Screw; 3/8" X 1-3/4", Use When Hitch Is Lowered, Cap Screw; 3/8" X 1", Cap Screw; 3/8" X 1-3/4", (675) 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4" (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4", (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 5440 Model Only, Cap Screw; 3/8"X1-1/4" (Sub For 19h246), Cap Screw; 3/8" X 1-3/4", (K1) (K2), Cap Screw; 3/8" X 1-3/4", R.H., Cap Screw; 3/8" X 1-3/4", For 4 Section, Cap Screw; 3/8" X 1-3/4" (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8) (Sub For 19h3217, This Application), Cap Screw; 3/8" X 1-3/4", (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Use With 12h304), Cap Screw; 3/8" X 1-3/4", (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8), (Sub For 19h3217, This Application), Cap Screw; (A) (C) 3/8"X1-3/4", Cap Screw; 3/8"-16 Unc X1-3/4", Cap Screw; 3/8" X 1-3/4" Rh, Cap Screw; 3/8" X 1-3/4", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8"-16 Nc X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4" 1524-2235mm (60"-88"), Cap Screw; 9.525 X 44.450 mm, Cap Screw; 3/8" X 1-3/4", (Sub 19h3217), Cap Screw; 3/8" X 1-3/4", (Sub For Ty7101), Cap Screw; 3/8" X 1-3/4", (2 Used Single Selective Control) (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4", (3020*), Cap Screw; 3/8" X 1-3/4", (3020e), Cap Screw; 3/8" X 1-3/4", (Sub For Hmx03276), Cap Screw; 3/8"X3/4", Cap Screw; (A: Germany) 3/8" X 1-3/4"1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Hydraulic Down Pressure Cylinder - 6.1 M (20 Ft.) Only-63 Mm X 203 Mm (2-1/2" X 8") ( - 1997)
19***84Cap Screw; 3/8" X 7/8" (Also Order (2) 24h1305), Cap Screw; 3/8" X 7/8", (Dry Type Air Cleaner), Cap Screw; 3/8" X 7/8" (Rear), Cap Screw; (C) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (2501), Cap Screw; 3/8" X 7/8", Up, Cap Screw; 3/8"X7/8" (Sub For 19h1732), Cap Screw; 3/8" X 7/8", (Lower) (Power Shift), Cap Screw; 3/8" X 7/8" (For R122196), Cap Screw; 9.525 X 22.225 mm, Cap Screw; 3/8"X7/8" Appl, Cap Screw; 3/8"X7/8", (Sub For 19h1732), Cap Screw; 3/8" X 7/8" (Sub T53268, This Application), Cap Screw; 3/8" X 7/8" (Use With Re33058), Cap Screw; (B: (Xxxxxx-) 4555-01***00; 4755-01***01; 4955-01***49) 3/8" X 7/8", Cap Screw; 3/8" X 7/8" (Use With R62371), Cap Screw; (A), Cap Screw; (B: (Xxxxxx-) Esn 4650-32***15; 4850-32***46) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", 8650 Tractor, Cap Screw; 3/8" X 7/8" Radiator Support, Cap Screw; 3/8" X 7/8", (Ru And Or), Cap Screw; 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Ea-6), Cap Screw; 3/8" X 7/8", (Na-6, Gn-01), Cap Screw; 3/8" X 7/8", (Use With Re19268 And Re33058), Cap Screw; 3/8" X 7/8" Front Frame, Cap Screw; 3/8" X 7/8" (Use With Re63295), Cap Screw; 3/8" X 7/8", (Use With Ar87024 Or Ar87023), Cap Screw; 3/8" X 7/8", Cap Screw; (A: (-Xxxxxx) 4650-01***77; 4850-01***15) 3/8" X 7/8", Cap Screw; 3/8" X 7/8" (Use With 14h812), Cap Screw; 3/8" X 7/8" (Rg),. Bolt, Cap Screw; 3/8" X 7/8" (Use With 12h304 And 14h812), Cap Screw; (A) 3/8" X 7/8", Cap Screw; (A) (B) 3/8" X 7/8", Cap Screw; 3/8"X7/8" (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (9 Used Diesel) (6 Used Gasoline), Cap Screw; 3/8" X 7/8", (Dn-02), Cap Screw; (B) 3/8"X7/8", Cap Screw; 3/8" X 7/8" (Sub At48506), Cap Screw; 3/8" X 7/8" (Less Power Take-Off), Cap Screw; 3/8" X 7/8" (4050), Cap Screw; 3/8" X 7/8", (Use With Re46821), Cap Screw; 3/8"X7/8" (Sub For 19h1732, 19h2245), Cap Screw; 3/8" X 7/8" Use With Ar91662, Cap Screw; 3/8" X 7/8", (Code 2909), Cap Screw; 3/8" X 7/8" Up, Cap Screw; 3/8"X7/8" (Sub For 19h1731), Cap Screw; 3/8" X 7/8", (Use With R62371), Cap Screw; 3/8" X 7/8", (Sub T53268, This Application), Cap Screw; (A: 75cc) 3/8" X 7/8", Cap Screw; 5/16"X1", Cap Screw; 3/8" X 7/8", (Use With R100259), Cap Screw; (Fan Pulley To Hub), Cap Screw; 3/8" X 7/8" (Use With 12h304), Cap Screw; 3/8" X 7/8", (2501,9177), Cap Screw; 3/8" X 7/8" (Sub For 19h1648, This Application), Cap Screw; 3/8" X 7/8", (Oil Bath Air Cleaner), Cap Screw; 3/8" X 7/8", (Diesel), Cap Screw; (D) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Upper), Cap Screw; 3/8" X 7/8", (Use With Re63295), Cap Screw; 3/8" X 7/8", (Gasoline And Lp-Gas), Cap Screw; 3/8"X7/8" (Sub For At20727), Cap Screw; 3/8" X 7/8", (Row-Crop And Standard) (2 Used Hi-Crop), Cap Screw; 3/8" X 7/8" (Use With R100259), Cap Screw; 3/8" X 7/8", (To Upper Rh Thermostat Housing) 6216, Cap Screw; 3/8" X 7/8", (Ru, Rc), Cap Screw; 3/8"X7/8", Cap Screw; 3/8" X 7/8" (5460, 5820, 8630, 8640, 8650), Cap Screw; 3/8" X 7/8", (Ea-D, Ea-G, De-01, Ge-01), Cap Screw; 3/8" X 7/8", (Use With Re33058), Cap Screw; 3/8" X 7/8", (5400), Cap Screw; (A) 3/8"X 7/8", Cap Screw; 3/8"X7/8" (Ord 19h1731), Cap Screw; (A) 3/8"X7/8", Mechanical Front Wheel Drive, Cap Screw; (B: Engine Serial No.) 3/8" X 7/8", Cap Screw; 3/8"X7/8" (W/ At19509), Cap Screw; (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (Motorola), Cap Screw; (B) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", Code 2306 And 2307, Cap Screw; (Lu) (Orchard Fenders), Cap Screw; 3/8"X7/8" (For Ce15214), Cap Screw; 3/8" X 7/8" (Front), Cap Screw; 3/8" X 7/8", (Orchard Fenders), Cap Screw; 3/8"X4", Cap Screw; (Orchard Fenders), Cap Screw; 3/8" X 7/8", (Use With Re33058), Cap Screw; 3/8" X 7/8" (Dn-03, Nb-D), Cap Screw; 3/8" X 7/8", Code 2310, Cap Screw; 3/8" X 7/8", (Use With R81911) Code 2501 And 2503, Cap Screw; 3/8" X 7/8", (Use Wite Re20982), Cap Screw; 3/8"X7/8" (For Al39725), Cap Screw; 3/8" X 7/8" 3/8" X 7/8", Cap Screw; X 3/2" X 7/8", Cap Screw; 3/8" X 7/8" (Use With Re55714), Cap Screw; 3/8" X 7/8" 3/8"X7/8", Cap Screw; (A) 3/8"X7/8", Cap Screw; 3/4" X 3/4", Cap Screw; 3/8" X 7/8", (Use With Re19265), Cap Screw; 3/8" X 7/8" (Use With R122196), Cap Screw; 3/8" X 7/8", (9 Used (A)) (6 Used (B)), Cap Screw; 3/8"X5/8", Cap Screw; (Use With Ar87023 Or Ar87024), Cap Screw; 3/8" X 7/8", (Use With Re33058 Re19268 And Ar66398), Cap Screw; 3/8"X7/8" (For At19509), Cap Screw; 3/8" X 7/8", (Use With Re30427), Cap Screw; (B: For 75cc Hydrostatic Pump) 3/8" X 7/8", Cap Screw; 9.525 X 22.225 mm (3/8" X 7/8"), Cap Screw, Cap Screw; 3/8" X 7/8", (Use With Ar77343), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Use With Ar91662), Cap Screw; 3/8" X 7/8", (Use With Re20982), Cap Screw; Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 7/8" (Long), Cap Screw; 3/8" X 7/8", (Code 2819), Cap Screw; 3/8" X 7/8" (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (Na-D, Na-G, Dn-01, Gn-01), Cap Screw; 3/8" X 7/8", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8" X 7/8", (Power Shift), Cap Screw; 3/8" X 7/8" (Use With Re19268 And Re33058), Bolt, Cap Screw; 3/8" X 7/8", (Use With Ar87023 Or Ar87024), Cap Screw; 3/8" X 7/8" (For Al39725), Cap Screw; 3/8" X 7/8", (Rs, Ut, Or, Rus), Cap Screw; (A) (B) (C) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", Not Used This Application1
A5***21End1
AA***13Seal Kit; (Includes Parts Marked (A)), Seal Kit, Seal Kit; Includes Parts Marked (A)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Hydraulic Down Pressure Cylinder - 76 X 203 Mm (3" X 8") - 4.6 M (15 Ft.) Only ( - 1997)
11***49Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2"2
24***52Washer; 1-1/32" X 1-3/4" X 0.105", L.H., Washer; (B: 2096cc (69***01-) 9550sh (69***01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; 1-1/32" X 1-3/4" X 0.105" L.H., Washer; 1-1/32"X1-3/4"X.105", Washer; 1-1/32" X 1-3/4" X 0.105" Standard Capacity Only, Washer; 1-1/32" X 1-3/4" X 0.105", (Sub For (4) Mg25769) (675), Washer; (A) 1,031" X 1,75" X 0,105", Washer; 26x44x2,6mm, Washer; (G) 1-1/32" X 1-3/4" X 0.105", Washer; (A) 26,1 X 44,45 X 2,66 mm, Washer; 1-1/32" X 1-3/4" X 0.105" Base End, Washer; 26.187 X 44.450 X 2.667 mm (1-1/32" X 1-3/4" X 0.105"), Washer; (A: Semi-Mount Rotary Cutter Only) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Sub For 24m7090, This Application), Washer; 1-1/32" X 1-3/4" X 0.105", Washer; (A: For 9650 (69***01- ) & 9750 (69***01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; .105" X 1-1/32" X 1-3/4", Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; (G: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A) (B) 1.031" X 1.75" X 0.105", Washer; (A), Washer; 1-1/32" X 1-3/4" X 0.105" (Use With Ah213758), Washer; (A: Regular Duty) 1-1/32" X 1-3/4" X 0.105", Washer; 26.187 X 44.450 X 2.667 mm, Washer, Washer; (F: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (D: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A: For Msl) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X .105", Washer; (A) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105", 36 Ft And 42 Ft, Washer; 1-1/32" X 1-3/4" X 0.105", (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only4
A4***85End, End; (Use With An260360), End; (Use With An260477), End; (B), End; (Use With An260361), End; (Use With An240669), End; (Use With An260363), End; (Use With An240667), End; (Use With An260192), End; (Use With An240668)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Hydraulic Down Pressure Cylinder - 76 X 203 Mm (3" X 8") - 4.6 M (15 Ft.) Only (1998 - Apr 03)
14***40Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)8
14***12Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00***66; 7700-00***74; 7800-01***11) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-00***98; 7400-00***38) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-00***66; 7700-00***74; 7800-01***11) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65***01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf1
19***93Screw; 3/8" X 1-3/4" (Hs, Head Marked 180) (Sub For Ty7101), Screw; 3/8" X 1-3/4" (Hs, Head Marked 180), Screw; 3/8" X 1-3/4", Screw; 3/8" X 1-3/4", (Sub For Ty7101), Screw; 3/8" X 1-3/4" 3/8" X 1-3/4", Screw1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Hydraulic Down Pressure Cylinder - 76 X 203 Mm (3" X 8") - 4.6 M (15 Ft.) Only (Apr 03 - )
11***38Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm4
24***52Washer; 1-1/32" X 1-3/4" X 0.105", L.H., Washer; (B: 2096cc (69***01-) 9550sh (69***01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; 1-1/32" X 1-3/4" X 0.105" L.H., Washer; 1-1/32"X1-3/4"X.105", Washer; 1-1/32" X 1-3/4" X 0.105" Standard Capacity Only, Washer; 1-1/32" X 1-3/4" X 0.105", (Sub For (4) Mg25769) (675), Washer; (A) 1,031" X 1,75" X 0,105", Washer; 26x44x2,6mm, Washer; (G) 1-1/32" X 1-3/4" X 0.105", Washer; (A) 26,1 X 44,45 X 2,66 mm, Washer; 1-1/32" X 1-3/4" X 0.105" Base End, Washer; 26.187 X 44.450 X 2.667 mm (1-1/32" X 1-3/4" X 0.105"), Washer; (A: Semi-Mount Rotary Cutter Only) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Sub For 24m7090, This Application), Washer; 1-1/32" X 1-3/4" X 0.105", Washer; (A: For 9650 (69***01- ) & 9750 (69***01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; .105" X 1-1/32" X 1-3/4", Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; (G: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A) (B) 1.031" X 1.75" X 0.105", Washer; (A), Washer; 1-1/32" X 1-3/4" X 0.105" (Use With Ah213758), Washer; (A: Regular Duty) 1-1/32" X 1-3/4" X 0.105", Washer; 26.187 X 44.450 X 2.667 mm, Washer, Washer; (F: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (D: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A: For Msl) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X .105", Washer; (A) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105", 36 Ft And 42 Ft, Washer; 1-1/32" X 1-3/4" X 0.105", (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only4
AH***68Hydraulic Cylinder; (John Deere) (Illustrated), (Sub For Ah176369), Hydraulic Cylinder; (John Deere), Hydraulic Cylinder, Hydraulic Cylinder; (Sub For Ah176369)(John Deere) (Illustrated), Hydraulic Cylinder; (John Deere) (Illustrated) (Sub For Ah176369), Hydraulic Cylinder; 3 X 8 (Sub For Re24010), Hydraulic Cylinder; (Sub For Ah176369), Hydraulic Cylinder; 3 X 8, (Sub For Re24010), Hydraulic Cylinder; 3 X 8, (Sub For An163270 And Re24010), Hydraulic Cylinder; (Sub For A45271), Hydraulic Cylinder; (John Deere) (Sub For Ah176369), Hydraulic Cylinder; (Bailey), (Sub For Ap40003)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Hydraulic Down Pressure System - 4.6 M (15 Ft. Only) 76 X 203 Mm (3" X 8") Cylinder
15***32Coupling; 1/4", Pipe, Coupling; (A: Use With Tsn 8450-00***28, 00***45 - 00***16; 8650-00***55 - 00***65, 00***68 - 00***73) 1/4", Coupling; 1/4", Coupling; 6 mm (1/4"), Coupling, Coupling; 1/4" (2 Used For 660, 4 Used For 680), Coupling; 1/4" Pipe, Coupling; 1/4" 1/4", Coupling; 1/4" 1/4" (Sub Ah96547, This Application), Coupling; (A: 3150, 3155, 3640, 3650) 1/4"1
22***06Set Screw; 1/4"X1/2", Set Screw; 1/4" X 1/2", Set Screw; 0,25" X 0,50"1
24***52Washer; 1-1/32" X 1-3/4" X 0.105", L.H., Washer; (B: 2096cc (69***01-) 9550sh (69***01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; 1-1/32" X 1-3/4" X 0.105" L.H., Washer; 1-1/32"X1-3/4"X.105", Washer; 1-1/32" X 1-3/4" X 0.105" Standard Capacity Only, Washer; 1-1/32" X 1-3/4" X 0.105", (Sub For (4) Mg25769) (675), Washer; (A) 1,031" X 1,75" X 0,105", Washer; 26x44x2,6mm, Washer; (G) 1-1/32" X 1-3/4" X 0.105", Washer; (A) 26,1 X 44,45 X 2,66 mm, Washer; 1-1/32" X 1-3/4" X 0.105" Base End, Washer; 26.187 X 44.450 X 2.667 mm (1-1/32" X 1-3/4" X 0.105"), Washer; (A: Semi-Mount Rotary Cutter Only) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Sub For 24m7090, This Application), Washer; 1-1/32" X 1-3/4" X 0.105", Washer; (A: For 9650 (69***01- ) & 9750 (69***01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; .105" X 1-1/32" X 1-3/4", Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; (G: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A) (B) 1.031" X 1.75" X 0.105", Washer; (A), Washer; 1-1/32" X 1-3/4" X 0.105" (Use With Ah213758), Washer; (A: Regular Duty) 1-1/32" X 1-3/4" X 0.105", Washer; 26.187 X 44.450 X 2.667 mm, Washer, Washer; (F: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (D: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A: For Msl) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X .105", Washer; (A) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105", 36 Ft And 42 Ft, Washer; 1-1/32" X 1-3/4" X 0.105", (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Hydraulic Down Pressure System - 6.1 M (20 Ft. Only) - 63 X 203 Mm (2-1/2" X 8") Cylinder
15***32Coupling; 1/4", Pipe, Coupling; (A: Use With Tsn 8450-00***28, 00***45 - 00***16; 8650-00***55 - 00***65, 00***68 - 00***73) 1/4", Coupling; 1/4", Coupling; 6 mm (1/4"), Coupling, Coupling; 1/4" (2 Used For 660, 4 Used For 680), Coupling; 1/4" Pipe, Coupling; 1/4" 1/4", Coupling; 1/4" 1/4" (Sub Ah96547, This Application), Coupling; (A: 3150, 3155, 3640, 3650) 1/4"1
22***06Set Screw; 1/4"X1/2", Set Screw; 1/4" X 1/2", Set Screw; 0,25" X 0,50"1
24***52Washer; 1-1/32" X 1-3/4" X 0.105", L.H., Washer; (B: 2096cc (69***01-) 9550sh (69***01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; 1-1/32" X 1-3/4" X 0.105" L.H., Washer; 1-1/32"X1-3/4"X.105", Washer; 1-1/32" X 1-3/4" X 0.105" Standard Capacity Only, Washer; 1-1/32" X 1-3/4" X 0.105", (Sub For (4) Mg25769) (675), Washer; (A) 1,031" X 1,75" X 0,105", Washer; 26x44x2,6mm, Washer; (G) 1-1/32" X 1-3/4" X 0.105", Washer; (A) 26,1 X 44,45 X 2,66 mm, Washer; 1-1/32" X 1-3/4" X 0.105" Base End, Washer; 26.187 X 44.450 X 2.667 mm (1-1/32" X 1-3/4" X 0.105"), Washer; (A: Semi-Mount Rotary Cutter Only) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Sub For 24m7090, This Application), Washer; 1-1/32" X 1-3/4" X 0.105", Washer; (A: For 9650 (69***01- ) & 9750 (69***01- )) 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; .105" X 1-1/32" X 1-3/4", Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only, Washer; (G: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A) (B) 1.031" X 1.75" X 0.105", Washer; (A), Washer; 1-1/32" X 1-3/4" X 0.105" (Use With Ah213758), Washer; (A: Regular Duty) 1-1/32" X 1-3/4" X 0.105", Washer; 26.187 X 44.450 X 2.667 mm, Washer, Washer; (F: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (D: Lh Motor Only) 1-1/32" X 1-3/4" X 0.105", Washer; (A: For Msl) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X .105", Washer; (A) 1-1/32" X 1-3/4" X 0.105", Washer; 1-1/32" X 1-3/4" X 0.105" (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105", 36 Ft And 42 Ft, Washer; 1-1/32" X 1-3/4" X 0.105", (Use With N186178), Washer; 1-1/32" X 1-3/4" X 0.105" Lh Motor Only8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Lever Lock
R5***67Lever; (A), Wheel; Hub Assembly - Idler, With Bushing, Includes: Ref. 2, R52666 Idler Assembly, Lever; (A: Lock), Lever; (Lock For Scv Control Lever), Lever, Lever; (C) (Sub For Ar59805), Wheel; Hub Assembly - Idler, With Bushing, Includes: Ref. 24 & 25, R58615 Idler Assembly, Lever; (Sub For Ar59805), Wheel; Hub - Idler, Includes: Ref. 2, Lever; (Selective Control Valve Lever) (Sub For Ar59805), Wheel; Hub Assembly - Idler, With Bushing, Includes: Ref. 11, R55674 Idler Assembly, Lever; (Selective Control Valve Lever), Lever; (Lever Locking Clip), Wheel; Hub Assembly., Idler, Includes: Ref. 6, 71
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Marker Hydraulic System (Left- And Right-Hand)
19***49Cap Screw; 5/16" X 2-1/2", Rear Hole, Cap Screw; (A) 5/16" X 2-1/2", Cap Screw, Cap Screw; 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", , For 8-W And 8-N, Cap Screw; (A: 2 Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (Use With Kv23196), Cap Screw; 5/16" X 2-1/2", (Use With R123953, R128867 Or R133136), Cap Screw; 5/16" X 2-1/2" (Use With 12h303 And 14h785), Cap Screw; 5/16" X 2-1/2", (Sub For Mg88346), Cap Screw; 7.925 X 63.500 mm (5/16" X 2-1/2"), Cap Screw; 5/16" X 2-1/2" 5/16" X 2-1/2", Cap Screw; (A: 2 Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (With Harvestrak-Adj), Cap Screw; 5/16"X2-1/2", Cap Screw; 5/16" X 2-1/2" (Use With R123953, R128867 Or R133136), Cap Screw; (A: (2) Battery) 5/16" X 2-1/2" (-), Cap Screw; 5/16" X 2-1/2" (-), Cap Screw; (B) 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", For 12n, Cap Screw; 5/16" X 2-1/2", For 4w, 6n, 6w, Cap Screw; 5/16" X 2-1/2" (Use With R133136), Cap Screw; 5/16" X 2-1/2", Cap Screw; 5/16" X 2-1/2", (950, 1050 Tractor), Cap Screw; 5/16" X 2-1/2", (Use With Kv23196)2
AA***29Hydraulic Hose - Fab; 7/16" X 4 060 mm (159-3/4") X 7/16", From Sequence Valve To Marker Cylinders, Hydraulic Hose - Fab; 11.1252 mm X 4060 mm X 11.1252 mm 15 Ft., Hydraulic Hose - Fab; 7/16" X 4 060 mm (159-3/4") X 7/16", (Sub For Aa34282), Hydraulic Hose - Fab; 11.1252 mm X 4060 mm X 11.1252 mm 15 Ft, Hydraulic Hose - Fab; 11.1252 mm X 4060 mm X 11.1252 mm, Hydraulic Hose - Fab; (B: From Sequence Valve To Marker Cylinders) (Sub For Aa34282), Hydraulic Hose - Fab; 7/16" X 159-3/4" X 7/16", (Sub For Aa34282) From Sequence Valve To Marker Cylinders, Hydraulic Hose - Fab; 11.1252 mm X 4060 mm X 11.1252 mm (71" - 103"), Hydraulic Hose - Fab; (A: 6 Row), Hydraulic Hose - Fab; 6-Row, 30"; 9-Row, 15"; 11-Row, 15"., Hydraulic Hose - Fab; 7/16" X 4 060 mm (159-3/4") X 7/16", 4-Row And 6-Row Narrow, Hydraulic Hose - Fab; (B: From Sequence Valve To Marker Cylinders) 11.1252 mm X 4060 mm X 11.1252 mm, Hydraulic Hose - Fab; 7/16" X 4 060 mm (159-3/4") X 7/16", Hydraulic Hose - Fab; 4-Row, 30 In.; 6-Row, 30 In.; 6-Row, 70 cm4
AA***89Hydraulic Hose; 9/16" X 1 520 mm (59-3/4") X 9/16", Hydraulic Hose, Hydraulic Hose; 9/16" X 1520 mm X 9/16"4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Marker Hydraulic System (Left-Hand Only)
AA***83Hydraulic Hose; 11.1252 mm X 5664 mm X 11.1252 mm 8-Row, L.H. Side; R Port To Cylinder Piston End, Hydraulic Hose; 11.1252 mm X 5664 mm X 11.1252 mm 8-Row, L.H. Side; P Port To Cylinder Rod End, Hydraulic Hose; 11.1252 mm X 5664 mm X 11.1252 mm, Hydraulic Hose; 8-Row Wide, 12-Row 70 cm, Hydraulic Hose; 11.1252 mm X 5664 mm X 11.1252 mm (146" - 178"), Hydraulic Hose; 8-Row Wide, 12-Row 22-Inch Spacing, Hydraulic Hose; 7/16" X 5 665 mm (223") X 7/16", 8-Row Wide, 13-Row - 18, 19, 20-Inch, 15-Row - 18, 19, 20-Inch, Hydraulic Hose; 8-Row, 36, 38- And 40"; 13-Row, 18-, 19- And 20"; 15-Row, 18-, 19- And 20"., Hydraulic Hose; 8-Row, 36-, 38- And 40-In.; 12-Row, 22 In.; 10-Row, 30-In., Hydraulic Hose; 11.1252 mm X 5664 mm X 11.1252 mm (8 Row W, 10 Row N), Hydraulic Hose; 11.1252" X 5664 mm (223") X 11.1252" (Sub For Aa28564, This Application), Hydraulic Hose; 7/16" X 5 665 mm (223") X 7/16", 8-Row Wide, 12-Row 22-Inch Spacing And 10-Row Narrow2
AA***73Hydraulic Cylinder; 63 X 203 mm (2-1/2" X 8") (Sub For Ty8628), Hydraulic Cylinder, Hydraulic Cylinder; (2-1/2" X 8") (Sub For Ty8628 This Application), Hydraulic Cylinder; (Sub For Ty8628), Hydraulic Cylinder; (Sub For Ty8628, This Application), Hydraulic Cylinder; (2-1/2" X 8") (Sub For Ty8628, This Application)1
AH***90Hydraulic Cylinder, Hydraulic Cylinder; (Sub For Aa41238), Hydraulic Cylinder; 2-1/2" X 8", Hydraulic Cylinder; 63 X 203 mm (2-1/2" X 8") (Sub For Aa41238)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Marker Sequence Valve
AA***29Hydraulic Hose - Fab; 7/16" X 4 060 mm (159-3/4") X 7/16", From Sequence Valve To Marker Cylinders, Hydraulic Hose - Fab; 11.1252 mm X 4060 mm X 11.1252 mm 15 Ft., Hydraulic Hose - Fab; 7/16" X 4 060 mm (159-3/4") X 7/16", (Sub For Aa34282), Hydraulic Hose - Fab; 11.1252 mm X 4060 mm X 11.1252 mm 15 Ft, Hydraulic Hose - Fab; 11.1252 mm X 4060 mm X 11.1252 mm, Hydraulic Hose - Fab; (B: From Sequence Valve To Marker Cylinders) (Sub For Aa34282), Hydraulic Hose - Fab; 7/16" X 159-3/4" X 7/16", (Sub For Aa34282) From Sequence Valve To Marker Cylinders, Hydraulic Hose - Fab; 11.1252 mm X 4060 mm X 11.1252 mm (71" - 103"), Hydraulic Hose - Fab; (A: 6 Row), Hydraulic Hose - Fab; 6-Row, 30"; 9-Row, 15"; 11-Row, 15"., Hydraulic Hose - Fab; 7/16" X 4 060 mm (159-3/4") X 7/16", 4-Row And 6-Row Narrow, Hydraulic Hose - Fab; (B: From Sequence Valve To Marker Cylinders) 11.1252 mm X 4060 mm X 11.1252 mm, Hydraulic Hose - Fab; 7/16" X 4 060 mm (159-3/4") X 7/16", Hydraulic Hose - Fab; 4-Row, 30 In.; 6-Row, 30 In.; 6-Row, 70 cm4
AA***89Hydraulic Hose; 9/16" X 1 520 mm (59-3/4") X 9/16", Hydraulic Hose, Hydraulic Hose; 9/16" X 1520 mm X 9/16"2
AA***68Valve; Marker Sequence, Valve; (A) Marker Sequence, Valve; (B: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587), Valve; (A) (Sub For Aa38587), Valve; Valve Assembly Includes R26375, R28782, R39112, And R51031, Valve; Valve Includes R26375, R28782, R39112, And R51031, Valve; Valve Assembly Includes R26375,R28782, R39112 And R51031, Valve; (C: Complete Valve) (Sub For Aa38587), Valve; (B: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587) (Includes (2) R26375, (4) R28782, (2) R39112 And (4) R51031), Valve; (A), Valve; (E: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587), Valve, Valve; (G: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587), Valve; (Sub For Aa36440 And Aa38587), Valve; (B: Valve Assembly Includes R26375 O- Ring, R28782 O- Ring, R39112 Plug, R51031 Plug And A91252 Plug) (Sub For Aa43768), Valve; Valve Assembly Includes R26375 O-Ring, R28782 O-Ring, R39112 Plug And R51031 Plug, Valve; (Includes (2) R26375, (4) R28782, (2) R39112, (4) R51031) (Sub For Aa38587 And Aa34269), Valve; (Includes R26375, R28782, R39112 And R51031) (Sub For Aa38587) (Includes A91252), Valve; (C: Valve Ass'Y Includes A91252 Plug) (Includes (2) R26375, (4) R28782, (2) R39112 And (4) R51031) (Sub For Aa38587), Valve; (Includes R26375, R28782, R39112 And R51031), Valve; (C: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587)Complete Valve, Valve; (Includes R26375, R28782, R39112, R51031 And A91252), Valve; Valve Ass'Y Includes R26375 Ring-0, R28782 Ring-0, R39112 Plug And R51031 Plug, Valve; (Sub For Aa38587)Complete Valve, Valve; (A: Marker Sequence), Valve; (C: Marker Sequence), Valve; (A: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587) (Includes (2) R26375, (4) R28782, (2) R39112 And (4) R51031), Valve; (Includes R26375, R28782, R39112 And R51031) (Includes A91252) (Sub For Aa38587), Valve; Valve Ass'Y Includes R26375 Ring-0, R28782 Ring-O, R39112 Plug, And R51031 Plug, Valve; (C: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587), Valve; (Sub For Aa38587) (Includes (2) R26375, (4) R28782, (2) R39112 And (4) R51031), Valve; (F: Valve Ass'Y Includes A91252 Plug), Valve; Valve Includes R26375, R28782, R39112 And R51031, Valve; (A: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587), Valve; (Sub For Aa38587, Aa36440 And Aa34269) Valve Assembly Includes R26375, R28782, R39112, And R51031, Valve; (Includes (2) R26375, (4) R28782, (2) R39112 And (4) R51031), Valve; (Sub For Aa38587), Valve; Valve Ass'Y Includes R26375 Ring-0, R28782 Ring-0, R39112 Plug, And R51031 Plug, Valve; (F: Valve Ass'Y Includes A91252 Plug) (Sub For Aa38587)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Hydraulic : Open Center Tractor Hydraulic System (Hydraulic Rockshaft Down-Force)
AN***13Hydraulic Hose; 9/16" X 14" X 9/16", Hydraulic Hose; 9/16" X 356 mm (14") X 9/16", Hydraulic Hose; 9/16" X 355 mm X 9/16", Hydraulic Hose; 9/16" X 355 mm X 9/16" Bypass, Hydraulic Hose, Hydraulic Hose; Cylinder, Hydraulic Hose; 6.35 mm X 357 mm (1/4" X 14"), Hydraulic Hose; 6.35 X 356 mm (1/4 X 14")3
AN***80Check Valve; Includes (2) Au13262 Caps, P46051 O-Ring And (2) R26906 O-Rings, Check Valve; Includes (2) Au13262 Caps, (1) P46051 O-Ring And(2) R26906 O-Rings, Check Valve; (C: Includes (2) Au13262 Caps) (D: (1) P46051 O-Ring And (2) R26906 O-Rings), Check Valve; Includes (2) Au13262 Caps, (1) P46051 O-Ring And (2) R26906 O-Rings, Check Valve; Includes(2) Au13262 Caps,P46051 O-Ring And(2) R26906 O-Rings, Check Valve, Check Valve; (Incl P46051, R26906, 34h387), Check Valve; (A) Includes (2) Au13262 Caps, (1) P46051 O-Ring And (2) R26906 O-Rings1
AR***74Fitting; (A) (Sub At35123), Fitting; 90°, (Use With Ae49019, Ae39280, Ae35196 Or Ae38739), Fitting; (B) (Sub At35123), Fitting; (For Ah113671), Fitting; (C), Fitting; 90 Degree, (Sub At35123), Fitting; (Sub At35123), Fitting; (Use With Ae49019), Fitting; 90°, Fitting; (For Dc52644), Fitting; 90° Adjustable, Fitting; 90° (Dual Selective Control), Fitting; (Sub At35121) (Also Order R26448), Fitting; Adjustable, 90°, Fitting; (Use With Ae39280, Ae48350, Ae48574 Or Ae49019), Fitting; (Use With Ae48574 Or Ae49019), Fitting; (Use With Ae49019, Ae48574, Ae35196, Ae38739, Ae39280 Or Ae48350), Fitting; (A: (For Machines With 11-1/2 Foot Frame)), Fitting; (Use With Ae49019 Or Ae48574), Fitting; (A: -Xxxxxx 446(14***00) 546(14***00)), Fitting; (Sub At35123) 90 Degree, Fitting; (Sub At35121) 456s - (Also Order R26448), Fitting, Fitting; (A) 90°, Fitting; 90°, (Use With R32410), Fitting; 90° (R.H. And L.H.), Fitting; 90 Degree1
See all parts with full part numbers in Heavy Parts AI →
Markers
John Deere : 1520 - Drill, Grain : Markers : Marker Disk Assembly
03***12Bolt; (B) 3/8" X 2-1/2", Bolt, Bolt; 3/8" X 2-1/2", Bolt; (A) 3/8" X 2-1/2", Bolt; 3/8" X 2-1/2" Lh, Bolt; 3/8" X 2-1/2", Rd.Hd., Bolt; 3/8" X 2-1/2" (Use With 14h812)4
14***12Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00***66; 7700-00***74; 7800-01***11) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-00***98; 7400-00***38) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-00***66; 7700-00***74; 7800-01***11) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65***01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf4
19***29Cap Screw; 1" X 5-1/2", (Category 2, 3-Point Hitch) (814), Cap Screw; 1" X 5-1/2", Cap Screw; 1" X 5-1/2", (Category 2, 3-Point Hitch) (614)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Markers : Marker Pivot And Arm Assembly ( - 1997)
11***38Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm2
12***94Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"4
19***29Cap Screw; 1" X 5-1/2", (Category 2, 3-Point Hitch) (814), Cap Screw; 1" X 5-1/2", Cap Screw; 1" X 5-1/2", (Category 2, 3-Point Hitch) (614)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 1520 - Drill, Grain : Markers : Marker Pivot And Arm Assembly (1998 - )
11***49Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2"2
19***11Cap Screw; 1/2" X 5", (Use With R49722), Cap Screw; 1/2"X5", Cap Screw; 1/2" X 5" Upper, Cap Screw; 1/2" X 5" (A), Cap Screw; 1/2" X 5", Cap Screw; 7/8"X3", Cap Screw; 1/2" X 5" (Upper), Cap Screw; 1/2" X 5", (Sub 19h2120), Cap Screw; 1/2" X 5", (Use With Adjustable Gauge Wheel), Cap Screw; 1/2" X 5" (Not Used With Fenders), Cap Screw; 1/2" X 5", (With Two Spacers), Cap Screw; (B: Ar107921 - Input Yoke Parts) 1/2" X 5", Cap Screw; 1/2" X 5", (Use With Adjustable Gauge Wheels), Cap Screw; 1/2" X 5"1
19***29Cap Screw; 1" X 5-1/2", (Category 2, 3-Point Hitch) (814), Cap Screw; 1" X 5-1/2", Cap Screw; 1" X 5-1/2", (Category 2, 3-Point Hitch) (614)1
See all parts with full part numbers in Heavy Parts AI →

Need a specific 1520 - DRILL, GRAIN part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the appSource or supply its parts

Post a parts request and compare supplier quotes.