John Deereplow, moldboard (integral)(no series)
John Deere 1250 - PLOW, MOLDBOARD (INTEGRAL)
Specifications · OEM parts breakdown
Post a parts request and compare supplier quotes.
John Deere 1250 - PLOW, MOLDBOARD (INTEGRAL) specifications
Engine
| Displacement | 142.7 cu in. (2338 cc) |
| Cylinders | 3 |
Dimensions
| Ground Clearance | 44.0 cm (17.3 in.) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
All 1250 - PLOW, MOLDBOARD (INTEGRAL) assemblies by section
Every catalogued assembly group for the John Deere 1250 - PLOW, MOLDBOARD (INTEGRAL). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Decals [A12]
John Deere : 1250 - Plow, Moldboard (Integral) : Decals [A12]
| A1***35 | Ball Bearing; - Shaft Support, Decal; (Sub A25681) "1150" - Located On Truss Box | 1 |
| A1***37 | Decal; (Sub A25681) "1250" - Located On Truss Box | 1 |
| A2***81 | Label; (Sub A28529) Model Designation Kit, Label; "Model Designation", Label; "Model Designation" Front Right Side Main Frame, Label; Model Designation, Label, Label; (31 mm) Model Designation Kit), Label; Designation Kit, Label; Kit, Model Designation, For Main Frame, Label; (Sub For B31455) Kit, Model Designation, Label; "Model Designation" - Located On R.H. End And Rear Of Tube, Label; "Designation" Kit, Label; Kit, Model Designation, Label; "Designation", Label; "Model Designation", 30 mm (1-1/4"), Label; (Sub For B30931 And B31463) (Sub B30932 And B31464) For 1260 Or 1280 Planters Mount On Side Panel Of Main Frame., Label; Kit, Model Designation, 32 mm (1-1/4"), Label; Kit, Model Designation On Truss Box, Label; Kit, Model Designation, Outside And Front Of Truss Tube | 1 |
Disk Coulter ( -1973) [A23]
John Deere : 1250 - Plow, Moldboard (Integral) : Disk Coulter ( -1973) [A23]
| 11***15 | Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038) | 1 |
| 11***18 | Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel) | 2 |
| 12***94 | Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8" | 2 |
Frame 405 Mm (16") 3-Bottom [A05]
John Deere : 1250 - Plow, Moldboard (Integral) : Frame 405 Mm (16") 3-Bottom [A05]
| 08***73 | Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C) | 2 |
| 11***15 | Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038) | 1 |
| 11***49 | Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2" | 1 |
Frame 405 Mm (16") 4-Bottom [A07]
John Deere : 1250 - Plow, Moldboard (Integral) : Frame 405 Mm (16") 4-Bottom [A07]
| 08***73 | Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C) | 2 |
| 11***15 | Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038) | 1 |
| 11***49 | Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2" | 1 |
Frame 405 Mm (16") 5-Bottom [A13]
John Deere : 1250 - Plow, Moldboard (Integral) : Frame 405 Mm (16") 5-Bottom [A13]
| 08***73 | Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C) | 2 |
| 11***15 | Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038) | 1 |
| 11***49 | Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2" | 1 |
Frame 455 Mm (18") 4-Bottom [A09]
John Deere : 1250 - Plow, Moldboard (Integral) : Frame 455 Mm (18") 4-Bottom [A09]
| 08***73 | Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C) | 2 |
| 11***15 | Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038) | 1 |
| 11***49 | Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2" | 1 |
Frame 455 Mm (18") 5-Bottom [A15]
John Deere : 1250 - Plow, Moldboard (Integral) : Frame 455 Mm (18") 5-Bottom [A15]
| 08***73 | Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C) | 2 |
| 11***15 | Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038) | 1 |
| 11***49 | Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2" | 1 |
Gauge Wheel And Axle [A24]
John Deere : 1250 - Plow, Moldboard (Integral) : Gauge Wheel And Axle [A24]
| 03***99 | Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301) | 4 |
| 11***18 | Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel) | 1 |
| 12***94 | Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8" | 4 |
Hose Support (Hydraulic Landing Attachment) [A11]
John Deere : 1250 - Plow, Moldboard (Integral) : Hose Support (Hydraulic Landing Attachment) [A11]
| 12***01 | Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036) | 1 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 1 |
| B1***56 | Hose Support; (D), Hose Support, Hose Support; (Sub For B12092) | 1 |
Hydraulic Landing Attachment [B04]
John Deere : 1250 - Plow, Moldboard (Integral) : Hydraulic Landing Attachment [B04]
| 12***94 | Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8" | 2 |
| 12***01 | Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036) | 3 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 2 |
Rear Furrow Wheel [B02]
John Deere : 1250 - Plow, Moldboard (Integral) : Rear Furrow Wheel [B02]
| 10***73 | Bolt; 7/16" X 1-1/2", No. 3, Bolt; 7/16" X 1-1/2" | 5 |
| 10***37 | Bolt; 1/2"X2-1/2", Bolt; 1/2" X 2-1/2", N0. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", Hs Sae8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8), Bolt; (B) 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Hs, Sae 8) (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) Banding Boot, Bolt; 1/2" X 2-1/2", 3 Plow Bolt, Bolt; 1/2" X 2-1/2", (Hs Sae 8), Bolt; 1/2" X 2-1/2", Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (No. 3 Plow Bolt), Bolt; 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2", No. 3, Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Used With Chisels), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (Used With Chisels), Bolt; 1/2" X 2-1/2", (Hs, Sae 8), Bolt; 1/2" X 2-1/2", Hs Sae 8, Bolt; 1/2" X 2-1/2" No. 3 Plow Bolt (Hs, Sae 8), Bolt; 1/2" X 2-1/2", No. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", No.3 Plow Bolt, Bolt; 1/2" X 2-1/2" (For Use With Chisels), Bolt; 1/2" X 2-1/2", N0.3 Plow Bolt, Bolt; 12.700 X 63.500 mm (1/2" X 2-1/2") | 1 |
| 10***38 | Bolt; 1/2" X 2-3/4" (Used With Hard-Pointed Shovels), Bolt; 1/2" X 2-3/4", Bolt; 1/2" X 2-3/4" (Hs, Sae 8) Seed Boot, Bolt; 1/2" X 2-3/4", Hs, Sae 8, Bolt; 1/2" X 2-3/4" 8 Ft., Bolt; 1/2" X 2-3/4" 7 Ft., Bolt; 1/2" X 2-3/4", Hs Sae 8, Bolt; 1/2" X 2-3/4", (Lower) (Use With N130190), Bolt; 1/2" X 2-3/4" (Hs, Sae 8), Bolt; 1/2" X 2-3/4", (Hs, Sae 8) (Lower) (Use With N130190), Bolt; 1/2" X 2-3/4" 10 Ft., Bolt; 1/2" X 2-3/4", No. 3, Hs, Sae 8, Bolt; (E: 1.8 M (72 In.)(6 Ft.)) 1/2" X 2-3/4", Bolt; 1/2" X 2-3/4" 6 Ft., Bolt; 1/2" X 2-3/4", M16 X 90, Bolt; 1/2" X 2-3/4" 9 Ft. | 1 |
Reflector And Bracket [A06]
John Deere : 1250 - Plow, Moldboard (Integral) : Reflector And Bracket [A06]
| 12***02 | Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70***00) 9550sh ( -70***00)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (70***01- ) 9550sh (70***01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual) | 2 |
| 14***86 | Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-70***00) 9550sh (-70***00)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-70***00) & 9750sts (-70***00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4" | 2 |
| 21***02 | Screw; 1/4" X 5/8" (Use With 14h786), Screw; 1/4"X5/8", Screw; 1/4" X 5/8", Screw; 1/4" X 5/8", Use With Endwise Transport | 2 |
Rolling Coulter ( -1973) 430 Mm (17") Plain And Rippled With Chilled-Cone Bearings [A17]
John Deere : 1250 - Plow, Moldboard (Integral) : Rolling Coulter ( -1973) 430 Mm (17") Plain And Rippled With Chilled-Cone Bearings [A17]
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 2 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 1 |
| 14***47 | Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42***98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42***98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections | 1 |
Rolling Coulters ( -1976) 455 Mm (18") Plain And Rippled Chilled Cone Bearing (Clamp And Round Shank) [A18]
John Deere : 1250 - Plow, Moldboard (Integral) : Rolling Coulters ( -1976) 455 Mm (18") Plain And Rippled Chilled Cone Bearing (Clamp And Round Shank) [A18]
| 11***18 | Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel) | 2 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 3 |
| 14***47 | Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42***98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42***98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections | 1 |
Rolling Coulters 455 Mm And 510 Mm (18" And 20") Plain And Rippled Chilled-Cone Bearing (Clamp And Round Shank) [A21]
John Deere : 1250 - Plow, Moldboard (Integral) : Rolling Coulters 455 Mm And 510 Mm (18" And 20") Plain And Rippled Chilled-Cone Bearing (Clamp And Round Shank) [A21]
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 2 |
| 14***47 | Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42***98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42***98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections | 1 |
| 14***21 | Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8" | 2 |
Rolling Coulters 455 Mm And 510 Mm (18" And 20") Plain, Rippled, And Notched Anti-Friction Bearing (Clamp And Round Shank) [A19]
John Deere : 1250 - Plow, Moldboard (Integral) : Rolling Coulters 455 Mm And 510 Mm (18" And 20") Plain, Rippled, And Notched Anti-Friction Bearing (Clamp And Round Shank) [A19]
| 03***03 | Bolt, Bolt; 5/8" X 2" Cb5nc0.62x02.00, Bolt; 5/8" X 2", Bolt; Rd. Hd. 5/8" X 2", Bolt; 0,625" X 2,0", Bolt; 5/8" X 2", (Use With N184323), Bolt; 5/8" X 2", (2510, 3010, 3020, 4010 And 4020 Tractors) | 1 |
| 03***56 | Bolt; (D) 5/8" X 2-1/4", Bolt; (A) 5/8" X 2-1/4", Bolt; (A) (B) 5/8" X 2-1/4", Bolt; (C) (D) 5/8" X 2-1/4", Bolt; (C) 5/8" X 2-1/4", Bolt; (B) 5/8" X 2-1/4", Bolt; (E) 5/8" X 2-1/4", Bolt; (B) (C) 5/8" X 2-1/4", Bolt; (F) 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", Bolt; 5/8" X 2-1/4", (1020 And 2020 Tractor), Bolt; 5/8" X 2-1/4" (2840, 2940, 2950, 3130, 3140), Bolt; 5/8" X 2-1/4", (2510, 3010, 3020, 4010 And 4020 Tractors), Bolt; 5/8" X 2-1/4", (1020, 2010 And 2020 Tractors) | 1 |
| 11***18 | Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel) | 2 |
Rolling Coulters 455 Mm And 510 Mm (18" And 20") Plain, Rippled, And Notched Anti-Friction Bearing (Clamp And Round Shank) [A20]
John Deere : 1250 - Plow, Moldboard (Integral) : Rolling Coulters 455 Mm And 510 Mm (18" And 20") Plain, Rippled, And Notched Anti-Friction Bearing (Clamp And Round Shank) [A20]
| 11***18 | Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel) | 4 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 2 |
| 14***47 | Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42***98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42***98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections | 1 |
Root Cutter ( -1973) [A22]
John Deere : 1250 - Plow, Moldboard (Integral) : Root Cutter ( -1973) [A22]
| 10***15 | Bolt; 1/2" X 3-1/4" | 2 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 2 |
| CT***6A | Root Cutter | 1 |
Safety-Trip Standard ( -1981) 1250 [A25]
John Deere : 1250 - Plow, Moldboard (Integral) : Safety-Trip Standard ( -1981) 1250 [A25]
| 11***18 | Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel) | 1 |
| 12***94 | Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8" | 2 |
| 12***01 | Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036) | 3 |
Shear-Bolt Standard 1150 [B01]
John Deere : 1250 - Plow, Moldboard (Integral) : Shear-Bolt Standard 1150 [B01]
| 12***36 | Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00***27; 8650-00***32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc) | 1 |
| 12***94 | Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8" | 2 |
| 12***04 | Part Missing In Wise; 3/8", Outer, Part Missing In Wise; (A: Not Required) 3/8", Part Missing In Wise; (E) 3/8", Part Missing In Wise; 3/8" (B) (C), Part Missing In Wise; 3/8" (Not Longer Required), Part Missing In Wise; (C: (-Xxxxxx) 4050-00***92; 4250-01***53; 4450-02***81) 3/8" (Sub For R53668), Part Missing In Wise; 3/8", (Use With 19h3219) (Not Required With E55662), Part Missing In Wise; 3/8" (4050), Part Missing In Wise; 3/8", (Sub For Mg80679), Part Missing In Wise; 3/8", (Code 3904), Part Missing In Wise; 3/8" (B), Part Missing In Wise; (A: 5103e/5104/5204/5038d(00***01-), 5103/5103s(00***91-), 5203(00***82-).) 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With H108673), Part Missing In Wise; 3/8" (Saran Cd), Part Missing In Wise; 3/8", (Rs, Ut, Or), Part Missing In Wise; (B) (C) 3/8", Part Missing In Wise; 3/8", (Delco Remy), Part Missing In Wise; (B: Hi-Crop) 3/8", Part Missing In Wise; 3/8", (Not Used With E55662), Part Missing In Wise; (B: W/O Sound-Gard Body) 3/8", Part Missing In Wise; 3/8" (Use With R59409), Part Missing In Wise; 3/8", (Code 1601 And 1610), Part Missing In Wise; 3/8" (Pulley To Fan Spacer) Code 2314 (Af Only), Part Missing In Wise; (A) Roosa Master Dp,3/8", Part Missing In Wise; 3/8" (Sub For Ar52325), Part Missing In Wise; (A: From Sr.No.5103e/5103/5103s/5203-12***72, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; (C: Not Required) 3/8", Part Missing In Wise; 3/8" (913, 915, 918 And 924), Part Missing In Wise; 3/8", (Ru And Or), Part Missing In Wise; 3/8", (Rs), Part Missing In Wise; (B: (Xxxxxx-) 4555-01***00; 4755-01***01; 4955-01***49) 3/8", Part Missing In Wise; 3/8" (Radiator Brace Strut), Part Missing In Wise; X X (A) 3/8", Lock Washer; 3/8", Part Missing In Wise; (A) 3/8", (Use With R59409), Part Missing In Wise; 3/8", (Code 3102) (Not Req. W/E55662), Part Missing In Wise; 3/8", (Sub For Mg80680 And Mg80702), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8", (No Longer Required With 19h1936), Part Missing In Wise; 3/8", (Not Required With E55661), Part Missing In Wise; 3/8" (Without Dial-A-Matic), Part Missing In Wise; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Part Missing In Wise; 3/8", (Ru), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Part Missing In Wise; 3/8" Rh, Part Missing In Wise; 3/8" (Use With R53382), Part Missing In Wise; 9.525 mm (3/8") (854a, -61***50; 1253a, -61***00), Part Missing In Wise; 3/8", (Not Req. W/E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With 14h812), Part Missing In Wise; 3/8", (Not Required W/E55662), Part Missing In Wise; (B: (Xxxxxx-) Serial No. 8450-00***19; 8650-00***98) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) 3004 And 3005, Part Missing In Wise; 3/8", (Code 4102), Part Missing In Wise; 3/8" (Use With 19h3267), Part Missing In Wise; 3/8", 6216, Part Missing In Wise; 3/8", (Not Required W/ E55662), Part Missing In Wise; (A: (-Xxxxxx) 4250-00***71; 4450-01***05) 3/8", Part Missing In Wise; (No Longer Required With R41041), Part Missing In Wise; 3/8", (Standard Models), Lock Washer; 3/8", (Use With 19h2284) (Use With 19h2284), Part Missing In Wise; 3/8" Hi-Crop, Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***48; 8650-00***90) 3/8", Part Missing In Wise; 3/8" W/Rg, Part Missing In Wise; 3/8" (Sub For Mg80680), Part Missing In Wise; (B: (-Xxxxxx) 4650-00***55; 4850-00***27) 3/8", Part Missing In Wise; 3/8", 730 Tractor, Part Missing In Wise; 3/8", For 12' Harrow, Part Missing In Wise; 3/8" (Less Power Take-Off), Part Missing In Wise; 3/8", (Use With R191204), Part Missing In Wise; 3/8" 3/8" X 3/4", Part Missing In Wise; (A) 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Nlr For E55662), Part Missing In Wise; 3/8", (Not Used On 570), Part Missing In Wise; 3/8", (22 Used, Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", For 3179dl016, Part Missing In Wise; 3/4", Part Missing In Wise; (Use With 14h1076), Part Missing In Wise; 3/8", (Diesel), Part Missing In Wise; 3/8", (No Longer Required With 19h3483), Part Missing In Wise; 3/8", Roll Top, Part Missing In Wise; (B: 2 Used Dual, 3 Used Triple) 3/8", Part Missing In Wise; 3/8", (Use With Ar87023 Or Ar87024), Part Missing In Wise; 3/8", Code 2311 (Af, Af001) (Pulley To Fan Spacer), Part Missing In Wise; (A: Less Rockshaft) 3/8", Part Missing In Wise; (C: (-Xxxxxx) 4050-00***92; 4250-01***53; 4450-02***81) 3/8", Part Missing In Wise; 3/8", (Manual), Part Missing In Wise; 3/8" 3/8" Ar, Part Missing In Wise; 3/8", (Orchard Fenders), Part Missing In Wise; (A: Less Power Take-Off) 3/8", Part Missing In Wise; 3/8", Use With Furrower, Part Missing In Wise; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8", Part Missing In Wise; (A) (B) (C) 3/8", Part Missing In Wise; 3/8", Code 2311(Tf), Part Missing In Wise; (A) (C) (E) 3/8", Part Missing In Wise; (C: Use With Ar55639, Ar62267, Ar77254, Re13722, Re41875, Ty6701, Ty6710 And Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", (Use With R90994), Part Missing In Wise; 3/8", (Sub For T11088), Part Missing In Wise; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", (Not Req. W/ E55662), Part Missing In Wise; 3/8" (Use With R55396), Part Missing In Wise; 3/8", (3 Used 4640 (B)) (2 Used 4840), Part Missing In Wise; 3/8" (With Dial-A-Matic), Part Missing In Wise; 3/8, Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf), Part Missing In Wise; 3/8", (2 On Level Land;1 On Sidehill), Part Missing In Wise; 3/8" (Use With 19h2284), Part Missing In Wise; 3/8" (Not Shown), Part Missing In Wise; 3/8" (For Ar68802), Part Missing In Wise; (C) 3/8", (Not Required With E55662), Part Missing In Wise; 9.525 mm, (Saran Cd), Part Missing In Wise; 3/8" Na, Part Missing In Wise; 3/8", (Used With Gresen Valve), Part Missing In Wise; 3/8" (920, 922, 925 And 930), Part Missing In Wise; 3/8", For 3.0 M (10') Size, Part Missing In Wise; 3/8", (Not Required With E55662) (3011, 3016), Part Missing In Wise; 3/8", (Use With Re30427), Part Missing In Wise; 3/8", For 8-Tooth Section, Part Missing In Wise; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Part Missing In Wise; 3/8", (5 Used Syncro-Range) (6 Used Power Shift), Part Missing In Wise; (B: Less Rockshaft) 3/8", Part Missing In Wise; 3/8", (Use With T25701), Part Missing In Wise; 3/8", (4 Used Dual Selective Control), Part Missing In Wise; 3/8" (Rigid), Part Missing In Wise; 3/8", (Use With 24m7096), Part Missing In Wise; (A: (-Xxxxxx) 4650-00***65; 4850-00***01 (Pst)) 3/8", Part Missing In Wise; 3/8" (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Alternator To Dash), Part Missing In Wise; (Nlr With R41041), Part Missing In Wise; 3/8", (Hb-G, Gh-01), Part Missing In Wise; 3/8", (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Use With R82180 Or R100676) Code 2501 And 2503, Part Missing In Wise; 3/8", (Rc And St), Part Missing In Wise; 3/8", (Use With 19h2284), Part Missing In Wise; 3/8" (132", -68***74; 154", -68***09), Part Missing In Wise; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Part Missing In Wise; 3/8", (Or), Part Missing In Wise; 3/8", (Use With 19h3219), Part Missing In Wise; 9.525 mm (3/8"), Part Missing In Wise; 3/8", (Rs, Ru, Rus, Ut, Or), Part Missing In Wise; 3/8" (Use With At24256 Or At31394), Part Missing In Wise; 3/8" (No Longer Required), Part Missing In Wise; 3/8", For 915, Part Missing In Wise; 3/8" (For 19h2676, 19h1648), Part Missing In Wise; 3/8", (Adjustable Rear Axle), Part Missing In Wise; 3/8" (918 Rigid), Part Missing In Wise; (C: 42" Tire) 3/8", Part Missing In Wise; 3/8", (Use With R82180 Or R100676), Part Missing In Wise; 3/8", (Use With H108673), Part Missing In Wise; 3/8", (Not Req. With E55662), Part Missing In Wise; 3/8", (2 Used Single Selective Control) (4 Used Dual Selective Control), Part Missing In Wise; (Sub For R53668), Part Missing In Wise; 3/8", For 3.7 M (12') Size, Part Missing In Wise; 3/8" (For R57059), Part Missing In Wise; 3/8" (Nlr), Part Missing In Wise; (A: (-Xxxxxx)4755-01***03;4955-01***24) 3/8", Part Missing In Wise; 3/8" (Sgb), Part Missing In Wise; 3/8", (120 Used L.H.) (120 Used R.H.), Part Missing In Wise; 3/8" (Less Rockshaft), Part Missing In Wise; 3/8", (Use With H149504), Part Missing In Wise; 3/8", 2350, Part Missing In Wise; 3/8", (Code 2819), Part Missing In Wise; 3/8", (Cable), Part Missing In Wise; (A: Code 2501) (B: Code 2502) 3/8", Part Missing In Wise; 3/8", (Cab), Part Missing In Wise; 3/8" 918 (65***01-) 75 Used, Part Missing In Wise; 3/8", (1 Used L.H.) (1 Used R.H.), Part Missing In Wise; (Lu) (Orchard Fenders), Part Missing In Wise; 3/8", (Dn-02), Part Missing In Wise; 3/8" (Sub For (2) Mg80680), Part Missing In Wise; 3/8" (Use With R53396), Part Missing In Wise; 3/8", (Not Req. W/E55662), Part Missing In Wise; Ar, 3/8", Part Missing In Wise; 3/8", (Code 2111 And 3904), Part Missing In Wise; 3/8", (Use With Am124305 Front Frame), Part Missing In Wise; 3/8" (Code 4101), Part Missing In Wise; 3/8" (Level Land), Part Missing In Wise; 3/8" 3/8", Part Missing In Wise; (A: Mexico) (B: Turkey) 3/8", Part Missing In Wise, Part Missing In Wise; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8" (No Longer Required With R41041), Part Missing In Wise; 3/8", (Sub For T12634), Part Missing In Wise; 3/8", (Lp-Gas), Part Missing In Wise; 3/8", Used With Steel Moldboard, Part Missing In Wise; 3/8" Nla, Part Missing In Wise; 3/8", For 600 And 610, Part Missing In Wise; (B: Engine Serial No.) 3/8", Part Missing In Wise; (B: Radar Bracket To Transmission Sump Line Shield Bracket Screw) 3/8", Part Missing In Wise; 3/8", (A), Part Missing In Wise; (A) 3/8", Mechanical Front Wheel Drive, Part Missing In Wise; 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Part Missing In Wise; 3/8", Ar, Part Missing In Wise; (B: (Xxxxxx-) Esn 4650-32***15; 4850-32***46) 3/8", Part Missing In Wise; (A: From Sr.No. 5038d(00***62-)) 3/8", Part Missing In Wise; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Part Missing In Wise; (A: From Sr.No.5103s/5203-12***72, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Part Missing In Wise; 3/8" (Sgb) Nlr, Part Missing In Wise; (A: Power Shift Transmission) 3/8", Part Missing In Wise; 3/8", (Sub K40003, This Application Only), Part Missing In Wise; (A: W/O Sound-Gard Body) 3/8", Part Missing In Wise; (K) 3/8", Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8" (Flexible), Part Missing In Wise; (B: (Xxxxxx-) 4560-00***21; 4760-00***79; 4960-00***06) 3/8", Part Missing In Wise; 3/8", (Sub For R53668), Part Missing In Wise; (A) (B) 3/8", Part Missing In Wise; 3/8", Internal Tooth, Part Missing In Wise; 3/8", (Ea-G, Ge-01), Part Missing In Wise; 3/8" (Use With Delco-Remy), Part Missing In Wise; 3/8", Code 2314 (Af Only), Part Missing In Wise; 3/8" (4 Used, Rh; 5 Used, Lh), Part Missing In Wise; (A: Use With Ar87205) 3/8", Part Missing In Wise; 3/8", (Use With 14h1076 And 19h3239), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***13; 8650-00***23) 3/8", Part Missing In Wise; 3/8", For Spike-Tooth Sections, Part Missing In Wise; 3/8" (W/O Sgb), Part Missing In Wise; 3/8", (Use With 19h3239), Part Missing In Wise; (C: 3 Used Triple, 4 Used Quad) 3/8", Part Missing In Wise; 3/8" (Use With Re61087), Lock Washer; 3/8", (Use With R125195), Part Missing In Wise; X, Part Missing In Wise; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Part Missing In Wise; 3/8", (Use With Re33058), Part Missing In Wise; 3/8", (Nlr), Part Missing In Wise; (A: For Steel Moldboard) 3/8", Part Missing In Wise; (A: W/O Sgb) 3/8", Part Missing In Wise; 3/8", (Less Power Steering), Part Missing In Wise; 3/8", (Use With R59409 Or R81072), Part Missing In Wise; 3/8", For 4.6 M (15') Size, Part Missing In Wise; 3/8" (Sub T56055), Part Missing In Wise; (A: For Switzerland Only) 3/8", Part Missing In Wise; 3/8", (Mower Bar Only), Part Missing In Wise; (A) (B) (C) (D) 3/8", Part Missing In Wise; (Orchard Fenders), Part Missing In Wise; (A: (-Xxxxxx) 4650-01***77; 4850-01***15) 3/8", Lock Washer; 9.525 mm (3/8"), Part Missing In Wise; 3/8", 1350, Part Missing In Wise; 3/8", (Use With 19h2104 And 19h2855), Part Missing In Wise; 3/8", (Code 3903), Part Missing In Wise; 3/8", For 400, Part Missing In Wise; 3/8" To Secure Battery Cables To Frame, Part Missing In Wise; 3/8", For 15'3" Harrow, Part Missing In Wise; 3/8" (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; 3/8" (A), Part Missing In Wise; 3/8" (Use With 19h3239), Part Missing In Wise; 3/8", Terminal, Part Missing In Wise; 3/8" (Not Required W/E55662), Part Missing In Wise; 3/8", For 3179dl001, Part Missing In Wise; (A) 3/8", Part Missing In Wise; 3/8" (Use With H149504), Part Missing In Wise; 3/8" (Sub For R53668), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***53; 8650-00***74) 3/8", Part Missing In Wise; (A: (-Xxxxxx) Esn 4650-32***14; 4850-32***45) 3/8", Part Missing In Wise; 3/8", (750), Lock Washer; 3/8", (Sub For Ffsb107931), Part Missing In Wise; 3/8", (Use With R81911) Code 2501 And 2503, Part Missing In Wise; 3/8" (34 Harvester), Part Missing In Wise; (A: Contained In Ar94567) 3/8", Part Missing In Wise; (A: 5045d(00***75-), 5055d(00***19-), 5045e(00***74-), 5055e(00***75-), 5065e(00***02-), 5075e(00***21-)) 3/8", Part Missing In Wise; 3/8", For 810, Part Missing In Wise; (F: Used With Steel Moldboard) 3/8", Part Missing In Wise; 3/8", (13 Used, Rc And St) (11 Used, Ru And Or), Part Missing In Wise; 3/8", For 10' Harrow, Part Missing In Wise; (Use With 19h2284), Part Missing In Wise; 3/8", (St), Part Missing In Wise; 3/8", (Use With Ar77343), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" (Nlr), Part Missing In Wise; 3/8" (For 19h3267), Part Missing In Wise; (A) 3/8", (No Longer Available), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8", Used With Fiber Glass Seed Hopper, Part Missing In Wise; 9.525 mm (3/8") (Use With 19h1936), Part Missing In Wise; 3/8", (Rc, Ru, Rus), Part Missing In Wise; 3/8", (Not Required With 19h1936), Part Missing In Wise; 3/8", (2 Used, Variable Drive; 4 Used, Long), Part Missing In Wise; 3/8", (Code 6205), Part Missing In Wise; (A: (-Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) (Use With 19h3219), Part Missing In Wise; 3/8", (Use With R125586), Part Missing In Wise; 3/8" (Pst), Part Missing In Wise; 3/8", Used On Beet Planter, Part Missing In Wise; (B: 24 And 224 Balers) 3/8", Part Missing In Wise; (E) 9.525 mm (3/8"), Part Missing In Wise; 3/8" (A), (B), Lock Washer; 3/8", (Use With 19h3239), Part Missing In Wise; 3/8", (Sub R44302), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Part Missing In Wise; 3/8", (Not Longer Required), Part Missing In Wise; (No Longer Required), Part Missing In Wise; 3/8", (Use With 24h1303), Part Missing In Wise; 3/8" Lh, Part Missing In Wise; 3/8", (Use With R59409), Part Missing In Wise; 9.525 mm, Part Missing In Wise; 3/8", (Sub K40003, This Application), Part Missing In Wise; 3/8", (2 Used Single) (4 Used Dual), Part Missing In Wise; 3/8" Battery Terminal (1 Used Single Battery) (2 Used Dual Battery) (Use With Ar66424), Part Missing In Wise; 3/8", (Use With A24646 Or A24647 And A24651), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" (Nlr), Part Missing In Wise; 3/8" (Not Req. With E55662), Part Missing In Wise; 3/8", (Mower Bar), Part Missing In Wise; 3/8", (Cornhead Attachment), Part Missing In Wise; 3/8", (Ru, Rc), Part Missing In Wise; (Sub F16202), Part Missing In Wise; 3/8", 28-Inch Rows, Part Missing In Wise; (A: Engine Serial No.) 3/8", Part Missing In Wise; (C), Part Missing In Wise; 3/8", (Code 1701, 1702 And 1703), Part Missing In Wise; 3/8", Code 3905, Part Missing In Wise; 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Use With Ar11116), Part Missing In Wise; 3/8" (Rg), Part Missing In Wise; 3/8" (8 Used Dual) (12 Used Triple), Part Missing In Wise; 3/8", (No Longer Required With R41041), Part Missing In Wise; (B) 3/8", Part Missing In Wise; 3/8" (Qrt), Part Missing In Wise; 3/8", (Use With R114130, 14h812 And 19h3219), Part Missing In Wise; 3/8" (Not Required), Part Missing In Wise; 3/8", (Code 2108), Part Missing In Wise; 3/8" (D), Part Missing In Wise; 3/8" (No Longer Required, This Application), Part Missing In Wise; 3/8", (Motorola), Part Missing In Wise; 3/8" (Nla), Part Missing In Wise; 5/16", Part Missing In Wise; 3/8", (No Longer Required), Part Missing In Wise; 3/8", (Code 2101, 2102, Or 2109), Part Missing In Wise; 3/8" (Fan To R100682, R100676, R90561 Or R82180) Code 2314 (Af Only), Part Missing In Wise; 3/8", (Use With 14h1076), Part Missing In Wise; 3/8", (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Use With Ar55094), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8", Part Missing In Wise; (A: From Sr. No. 5103s-00***91, 5203-00***82, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; (B) 3/8", (Sub For R1870r), Part Missing In Wise; (C: Carbon Brush Conductor) 3/8", Part Missing In Wise; 3/8", For Gauge Shoe, Part Missing In Wise; 3/8", For R128566, R131753, Part Missing In Wise; 3/8", (Ea-D, Ea-G, Ha-G, De-01, Ge-01), Part Missing In Wise; (C: 5303 (-00***07), 5403 (-00***42).) 3/8", Part Missing In Wise; 3/8", (Use With 19h2676), Part Missing In Wise; 3/8", Fertilizer Opener, Part Missing In Wise; No 10, Part Missing In Wise; (A: From Sr.No. 5103s(01***67-), 5104(01***62-), 5204(00***15-)) 3/8", Part Missing In Wise; (A) (C) 3/8", Part Missing In Wise; X X X 3/8", Part Missing In Wise; 3/8", (Delco-Remy), Part Missing In Wise; (Code 1709), Part Missing In Wise; 3/8", (Use With Ar87024 Or Ar87023), Part Missing In Wise; 3/8", 4020 Or 4010 Tractor, Part Missing In Wise; (A) (B) 9.525 mm (3/8"), Part Missing In Wise; 3/8", (To Clip), Part Missing In Wise; 3/8", 2 Or 4 Used, Part Missing In Wise; 3/8", (Used With Victor Valve), Part Missing In Wise; 3/8", (Row-Crop), Part Missing In Wise; 3/8", (Use With Re19265), Part Missing In Wise; 3/8", For B27852 Only, Part Missing In Wise; 3/8" Low, Part Missing In Wise; 3/8" (A) (B), Part Missing In Wise; 3/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Part Missing In Wise; 3/8", (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; (A), Part Missing In Wise; 3/8", (Code 7001, 7002, 7003, And 7004), Part Missing In Wise; 3/8", Code 2311(Af, Af001), Part Missing In Wise; 3/8", (4 Used, Variable Drive; 6 Used, Long), Part Missing In Wise; 3/8", External Tooth, No. 10, Part Missing In Wise; 3/8" Ar, Part Missing In Wise; 3/8", (A), (D), Part Missing In Wise; (C) 3/8", Part Missing In Wise; 3/8", Part Missing In Wise; 3/8", 8650 Tractor, Part Missing In Wise; 3/8", (31 Used, 6'; 43 Used, 8'), Part Missing In Wise; 3/8", (Use With Ar36849), Part Missing In Wise; 3/8", (Regular), Part Missing In Wise; 3/8" (Use With R191204), Part Missing In Wise; (A: Assembly Listed Below Contains All Parts Identified By (A):) 3/8" (Use With R59409), Part Missing In Wise; 3/8", (No Longer Available), Part Missing In Wise; (A: Quad-Range Transmission) 3/8", Part Missing In Wise; 3/8", (Afd - No Longer Required), Part Missing In Wise; (E) 3/8", (Use With Ar66424), Part Missing In Wise; 3/8", Code 3907, Part Missing In Wise; 3/8" 3\8", Part Missing In Wise; 3/8", (Code 4101), Part Missing In Wise; 3/8" (Not Required W/E55662 Or 14h1090), Part Missing In Wise; (D) 3/8", Part Missing In Wise; 3/8" ((1) Per Spare Shear Bolt), Part Missing In Wise; 3/8" (6620 Sidehill), Part Missing In Wise; (A) 3/8", Outer, Part Missing In Wise; 3/8", 28" Rows Only, Part Missing In Wise; 3/8", For 6-Tooth Section, Part Missing In Wise; 3/8", 4010 Or 4020 Tractor, Part Missing In Wise; 3/8", (Saran Cd), Part Missing In Wise; 3/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Part Missing In Wise; 3/8", (Sub T56055), Part Missing In Wise; (A: No Longer Required) 3/8", Part Missing In Wise; 3/8", (18 Used Steel Pan) (21 Used Cast Iron Pan), Part Missing In Wise; 3/8", (6401), Part Missing In Wise; 3/8", (Not Required), Part Missing In Wise; 3/8", (Use With Ar66424 Or At25619), Part Missing In Wise; 3/8", (Not Req W/ E55662), Part Missing In Wise; (A) (B) (D) (E) 3/8", Part Missing In Wise; 3/8", (650), Part Missing In Wise; 3/8", (K1) (K2), Part Missing In Wise; 3/8" (Use With Motorola), Part Missing In Wise; 3/8", No. 20 Hitch, Part Missing In Wise; 3/8" (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Or, Rs, Rus, Ut), Part Missing In Wise; Internal-Tooth, No. 10, Part Missing In Wise; 3/8" (Use With Ae24403), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662), Part Missing In Wise; 3/8", (16 Used, 6'; 24 Used, 8'), Part Missing In Wise; 3/8", Code 2311 (Tf) (Pulley To Fan Spacer) | 1 |
Stand 3-, 4-, And 5-Bottom [B03]
John Deere : 1250 - Plow, Moldboard (Integral) : Stand 3-, 4-, And 5-Bottom [B03]
| 11***49 | Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2" | 1 |
| 2***6 | Cotter Pin; (Used With 40, 420 And 430 Special And Tricycle Tractors, Fordson Major And Similar Tractors), Cotter Pin; Spring Locking, Cotter Pin, Cotter Pin; (714a, 716a), Cotter Pin; For 600 And 610, Cotter Pin; (400), Cotter Pin; (600, 610), Cotter Pin; For 400, Cotter Pin; For 810, Cotter Pin; 1194 mm (47") (Sub For Mg37851), Cotter Pin; (Sub For Q23896), Cotter Pin; (C), Cotter Pin; (With Rear Unload), Cotter Pin; (Sub For S2955dw, This Application), Cotter Pin; (Use With Aw10999), Cotter Pin; Use With Steel Fingers, Cotter Pin; For 610, Cotter Pin; (Use With Gr28663), Cotter Pin; (Holds Wrench On Frame), Cotter Pin; (4 Used-Long Feeder House; 2 Used-Regular Feeder House) (Sub H95042), Cotter Pin; Outer, Cotter Pin; (Sub H95042), Cotter Pin; (Used With 430, 420, And 40 Special And Tricycle Tractors, Fordson Major And Similar Tractors), Cotter Pin; (810) | 1 |
| A1***16 | Pin Fastener | 1 |
Weed Hook ( -1973) [A22]
John Deere : 1250 - Plow, Moldboard (Integral) : Weed Hook ( -1973) [A22]
| 1***0 | Hook | 1 |
| 14***47 | Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42***98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42***98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections | 2 |
| 19***06 | Cap Screw; 7/16" X 2-3/4" (B), Cap Screw, Cap Screw; 7/16"X2-3/4", Cap Screw; 7/16" X 2-3/4", Cap Screw; 7/16" X 2-3/4" (Hydrostatic Drive Reel), Cap Screw; 7/16" X 2-3/4" (Lh Coupler), Cap Screw; 11.125 X 69.850 mm (7/16" X 2-3/4"), Cap Screw; 7/16" X 2-3/4", (Sub For Gf25164), Cap Screw; (A) 7/16" X 2-3/4", Cap Screw; (B: Quantities Shown Are For One Unit. Two Units Used Per Machine, Except Those Identified With An (A).) 7/16" X 2-3/4", Cap Screw; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16" X 2-3/4" | 1 |
Need a specific 1250 - PLOW, MOLDBOARD (INTEGRAL) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.
Post a parts request and compare supplier quotes.