John Deereaxle(no series)
John Deere 1200 - AXLE
Specifications · OEM parts breakdown
Post a parts request and compare supplier quotes.
John Deere 1200 - AXLE specifications
Weights
| Approximate dry weight | 726 kg (1600 lb) |
Dimensions
| Flange to flange narrow | 1300 mm (51.18 in) |
| Flange to flange offset | 1500 mm |
| Flange to flange standard | 1700 mm (66.93 in) |
| Flange to flange wide | 1953 mm (76.89 in) |
Performance
| Peak vertical load | 240,000 N (54,000 lb) |
Service capacities (summary)
| Oil capacity | 19 L (20 qt) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
1200 - AXLE common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| R27272 | Fitting | Fuel system service | Check fitment → |
| R29463 | O-Ring | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
All 1200 - AXLE assemblies by section
Every catalogued assembly group for the John Deere 1200 - AXLE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Axle Teammate I 1200
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107855 Standard Differential Case (Oc-1)
| 12***93 | U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16" | 10 |
| 19***39 | Cap Screw; 7/16" X 1-3/8", Cap Screw; 11.125 X 34.925 mm, (Use With Ar76006) (Dual), Cap Screw; 7/16" X 1-3/8", (Attaching), Cap Screw; 7/16" X 1-3/8", (Triple Scv) | 10 |
| 29***87 | Threaded Nipple; Use With Disk Openers Only 3/8" X 1", Threaded Nipple; 3/8", Threaded Nipple; 3/8", Threaded Nipple; (B), Threaded Nipple; 3/8", (Sub For Grp017), Threaded Nipple; 3/8" Close, Threaded Nipple; 3/8" X 1" Close, Threaded Nipple, Threaded Nipple; (C) 3/8" X 1", Threaded Nipple; (A) 3/8" X 1", Threaded Nipple; 3/8" X 1", Threaded Nipple; Nipple, Pipe, 3/8" X 1", Threaded Nipple; 3/8" X 1" Std., Threaded Nipple; (B) 3/8" X 1" | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107860 Standard Differential Case (Oc-1)
| 12***93 | U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16" | 10 |
| 19***39 | Cap Screw; 7/16" X 1-3/8", Cap Screw; 11.125 X 34.925 mm, (Use With Ar76006) (Dual), Cap Screw; 7/16" X 1-3/8", (Attaching), Cap Screw; 7/16" X 1-3/8", (Triple Scv) | 10 |
| 29***87 | Threaded Nipple; Use With Disk Openers Only 3/8" X 1", Threaded Nipple; 3/8", Threaded Nipple; 3/8", Threaded Nipple; (B), Threaded Nipple; 3/8", (Sub For Grp017), Threaded Nipple; 3/8" Close, Threaded Nipple; 3/8" X 1" Close, Threaded Nipple, Threaded Nipple; (C) 3/8" X 1", Threaded Nipple; (A) 3/8" X 1", Threaded Nipple; 3/8" X 1", Threaded Nipple; Nipple, Pipe, 3/8" X 1", Threaded Nipple; 3/8" X 1" Std., Threaded Nipple; (B) 3/8" X 1" | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107861, Ar107864 Differential Bearing Quills (Std, Oc-1 And No-Spin, Oc-2)
| 14***23 | Nut; 1/2", Sq., Nut; 1/2", Nut; 1/2", Square, Nut; 1/2", (Not Used This Application), Nut; 1/2" Square, Nut; 1/2" | 2 |
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 12 |
| JD***59 | Bearing Cone; (A), Bearing Cone; Lh, Bearing Cone; Rh (Ord (2) L28376, L29000, L29001, L29002, (16) L40557), Bearing Cone; L.H., Bearing Cone, Bearing Cone; (A), Bearing Cone; (Use With Ar101616), Bearing Cone; (B), Bearing Cone, Bearing Cone; Opp. Ring Gear Side, Bearing Cone; (B), Bearing Cone; Opp, Ring Gear Side | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107863, Ar107864 Standard Differential (Oc-2)
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 10 |
| R1***39 | Cap Screw; 1/2" X 3-3/4", (Sub R44888), Cap Screw; (Sub For R44888), Cap Screw, Cap Screw, Cap Screw; 1/2" X 3-3/4", (Sub For R44888), Cap Screw; (Sub For R44888), Cap Screw; 12.700 X 95.250 mm (1/2" X 3-3/4") | 8 |
| R4***42 | Pump; - Cs And S No. 3139611004, Parts List Figure 205a, Pump; Assembly - Hydraulic, Commercial Shearing No. 3139611004, Dozer And Drawbar Models, Includes: Ref. 1 - 14, Serial Range: -83***78, Pump; - Hydraulic, Cs And S No. 3139611004, Used On Dozer And Drawbar Models, Tractor Sn 83***01 And After, Includes: Ref. 1 - 14, Stop, Pump; Hydraulic, Pump, Pump; Assembly - Dozer And Drawbar Models, Used Prior To Tractor P.I.N. 83***78, Parts List Fig. 8-318, Stop | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107865 Input Housing (Oc-1)
| 11***32 | Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218) | 1 |
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 6 |
| JD***40 | Bearing Cup; (Use With R72448), Bearing Cup, Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107866 Input Housing (Oc-B)
| 11***32 | Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218) | 1 |
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 6 |
| JD***40 | Bearing Cup; (Use With R72448), Bearing Cup, Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107867 Differential Bearing Quills (Oc-3)
| 14***23 | Nut; 1/2", Sq., Nut; 1/2", Nut; 1/2", Square, Nut; 1/2", (Not Used This Application), Nut; 1/2" Square, Nut; 1/2" | 2 |
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 12 |
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107867 Differential Case To Quill Oil Lines (Oc-3)
| AR***91 | Oil Line, Oil Line; Pressure | 1 |
| AR***49 | Fitting, Fitting | 1 |
| AR***62 | Fitting, Fitting | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107867,Ar107868 Differential Lock (Oc-3)
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 10 |
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 2 |
| AR***63 | Housing; (Marked R73002), Housing; (Markedr73002 ) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107868 Differential Bearing Quills (Oc-3)
| 14***23 | Nut; 1/2", Sq., Nut; 1/2", Nut; 1/2", Square, Nut; 1/2", (Not Used This Application), Nut; 1/2" Square, Nut; 1/2" | 2 |
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 12 |
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107868 Differential Case To Quill Connectors (Oc-3)
| 14***04 | Nut; 3/4" 19.050 mm 3/4 Unf-2b Zn, Nut; 19.050 mm (3/4") (Sub For Na3557), Nut, Nut; 3/4" (Sub 14h902, This Application And 11h237), Nut; 3/4" (Without Hydraulic Wing Control), Nut; 3/4", (Sub For Na3557), Nut; 3/4", For 12n, Nut; 3/4", For Independent Marker, Nut; 3/4", Unf, Jam, Nut; 3/4", Jam, Nut; 3/4", Automatic Marker, Nut; 3/4", Independent Marker, Nut; 3/4", Nut; 3/4" (B), Nut; 3/4", For Automatic Marker, Nut; (A) 3/4", Nut; (A: Without Hydraulic Wing Control) 3/4", Nut; 3/4", Unf, Nut; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 3/4", Nut; 3/4" 3/4 Unf-2b Zn, Nut; 3/4" 3/4", Nut; 3/4", Unf,Jam, Nut; (B: Note; (Tbh Illustrated) (Tbt) -71***05 (Tbh) -71***78) 3/4", Nut; 3/4", For 6w, 8n, 8w, Nut; 3/4", Jam. Unf., Nut; 3/4" Jam, Nut; (B) 3/4", Nut; Without Hydraulic Wing Control, Nut; (A: Note; (Tbt) 71***06- (Tbh) 71***79-) 3/4", Nut; (B) 3/4", Nut; 304", Nut; 3/4" Without Hydraulic Wing Control | 2 |
| 24***39 | Washer; (A: Use With Conversion From Niehoff To Motorola Alternator For 8450 Prior To Serial No. 00***86) 11/16" X 1-1/4" X 0.105", Washer, Washer; 11/16" X 1-1/4" X 0.105", (No Longer Required), Washer; .105" X 11/16" X 1-1/4", Washer; 11/16" X 1-1/4" X 0.105" (B), Washer; 11/16" X 1-1/4" X 0.105", (Sub For C1246r, This Application), Washer; 11/16" X 1-1/4" X 0.105" Rh, Washer; 11/16" X 1-1/4" X 0.105", 1 Per Wheel With More Than One Weight, Washer; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 11/16" X 1-1/4" X 0.105", Washer; 21/32"X1-1/4"X.120", Washer; 11/16" X 1-1/4" X .105", Washer; (C) 11/16" X 1-1/4" X 0.105", Washer; 17.475 X 31.750 X 2.667 mm (11/16" X 1-1/4" X 0.105"), Washer; 11/16" X 1-1/4" X 0.105" (C), Washer; (A: Not Used In U.S. And Canada) 11/16" X 1-1/4" X 0.105", Washer; 11/16" X 1-1/4" X 0.105", Washer; (B) 11/16" X 1-1/4" X 0.105", Washer; 11/16" X 1-1/4" X 0.105" 1 Per Wheel With More Than One Weight, Washer; (A: For 9650 (70***01- ) & 9750 (70***01- )) 11/16" X 1-1/4" X 0.105", Washer; (A: For 9650 ( -70***00) & 9750 ( -70***00)) 11/16" X 1-1/4" X 0.105", Washer; (A) 11/16" X 1-1/4" X 0.105", Washer; X 11/16" X 1-1/4" X .105", Washer; 11/16" X 1-1/4" X 0.105", Used With Strap N240536 Only, Washer; 11/16" X 1-1/4" X 0.105", (714, 716), Washer; 11/16" X 1-1/4" X 0.105", (Sub For M42114), Washer; 11/16" X 1-1/4" X 0.105", (4, 8, 12, 16 Or 20 Quik-Tatch Weights), Washer; 11/16"X1-1/4"X.105", Washer; (B) 11/16" X 1-1/4" X 0.105" | 2 |
| R2***86 | O-Ring; (B: Saran (Cd) Esn Xxxxxx-) (Sae), O-Ring; 0.414" X 0.072", O-Ring; (Metric), O-Ring; (Use With R41929), O-Ring; (A: (-Xxxxxx) Tsn 4050-00***35; 4250-00***01; 4450-01***49 (Pst)) (C: (-Xxxxxx) Tsn 4050-00***65; 4250-00***05; 4450-00***40 (Qrt)), O-Ring; (A: Not Illustrated), O-Ring; (A: Quad-Range Transmission), O-Ring; (Use With R72054), O-Ring; (B: Dubuque (T0) Esn 70***26-71***39) (Sae), O-Ring; (D: Not Included In Kit) (Use With Re63183), O-Ring; (Use With Ar87537), O-Ring; (Code 3509), O-Ring; Kit Ar98993, O-Ring; (B: Dubuque (T0) Esn 71***40-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; 10.516 X 1.829 mm, (Cd4045) (Sae), O-Ring; Connector To Injection Pump, O-Ring; 10.516 X 1.829 mm (Use With 3594), O-Ring; (B: Dubuque (To) Esn 71***40-) (C: Dubuque (To) Esn -89***59) (D: Saran (Cd) Esn -Xxxxxx) (E: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque(T0) Esn 70***95-73***69) (Sae), O-Ring; (1 Used With Power Take-Off) (2 Used Less Power Take-Off), O-Ring; (B: Dubuque (T0) Esn -71***39) (Sae), O-Ring; (B: Dubuque (T0) Esn 77***67-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Saran (Cd) Esn Xxx-) (C: Torreon (Pe) Esn Xxx-) (Sae), O-Ring, O-Ring; (B: Dubuque (T0) Esn -70***25) (Sae), O-Ring; (A), O-Ring; (Sub For R28785), O-Ring; (Use With R78123), O-Ring; (B: Dubuque (To) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque (T0) Esn -89***59) (C: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (Use With Re12184), O-Ring; 10.516 X 1.829 mm, O-Ring; (B: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (B: Dubuque (T0) Esn -71***39) (Sae), O-Ring; (Kit Ar31946), O-Ring; (Connector To Injection Pump), O-Ring; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (Cd4045) (Sae), O-Ring; (A: Included In Ar67781), O-Ring; (For All Tractors Except Utility), O-Ring; (Use With Re10686), O-Ring; (B: Dubuque (T0) Esn 70***96-89***59) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (Sae), O-Ring; (Less Differential Lock), O-Ring; (B), O-Ring; 10.516 X 1.829 mm (0.414" X 0.072") (Sae), O-Ring; 10.516 X 1.829 mm (0.414" X 0.072"), O-Ring; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; Power Take-Off, O-Ring; (Use With R34814, R36902 Or R40632), O-Ring; Connector To Injection Pump, O-Ring; (Power Take-Off), O-Ring; (Use With Re63183), O-Ring; (B: Dubuque (To) Esn -70***95) (Sae), O-Ring; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxx) (D: Torreon (Pe) Esn -Xxx) (Sae), O-Ring; Kit Ar31946, O-Ring; Code 2107 And 2108, O-Ring; (A: Saran (Cd) Esn Xxxxxx-) (B: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (B: Dubuque (T0) Esn 71***40-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque (T0) Esn 77***67-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; 10.516 X 1.829 mm (0.414" X 0.072") (Cd4045) (Sae), O-Ring; (Use With Re63182 Or Re63183), O-Ring; (B: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (W/O Mechanical Front Wheel Drive), O-Ring; (A: (-Xxxxxx) Serial No. 8450-00***23; 8650-00***81), O-Ring; 10.516 X 1.829 mm, (W/ 3506, 3567, 3595), O-Ring; (A: Acs), O-Ring; (5 Used Single, 6 Used Dual), O-Ring; (Use With R57382), O-Ring; (Use With R44820) 4520 And 4620 Tractors, O-Ring; (B: Saran (Cd) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (5 Used Single) (6 Used Dual), O-Ring; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; Code 2101 And 2103, O-Ring; (B: Dubuque (T0) Esn -70***95) (Sae), O-Ring; (Use With Re13561), O-Ring; Sae, O-Ring; (B: Dubuque (T0) Esn -71***39) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque (To) Esn 70***96-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) (E: Dubuque (To) Esn -89***59) (Sae), O-Ring; (Sub For R78079), O-Ring; To Injection Pump, O-Ring; (Use With Ar94027), O-Ring; Code 3905, O-Ring, O-Ring; (K) (Sub For Mg510121), O-Ring; (A: Lift Assist), O-Ring; (B: Dubuque (T0) Esn 73***70-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (For R27272), O-Ring; (24-Speed), O-Ring; (1 Used Power Take-Off) (2 Used Less Power Take-Off), O-Ring; (A: See Your Authorized Pump Repair Station For Internal Parts) (B: Dubuque (T0) Esn 77***67-) (C: Saran (Cd) Esn -Xxxxxx) (Sae), O-Ring; Use With Turbocharger, O-Ring; (B: Autotrac), O-Ring; (Use With 3594), O-Ring; (4 Used Less Power Take-Off), O-Ring; (G: Not Used In U.S. And Canada) (H: Also Use On 4050e And 4250e), O-Ring; (B), O-Ring; 10.516 X 1.829 mm, (Use With 3594), O-Ring; 10.516 X 1.829 mm (0.414" X 0.072") (Pe4045) (Sae), O-Ring; (A) (B), O-Ring; (Quad-Range), O-Ring; (Pe4045) (Sae) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107871,Re35781 Inboard Wet Disk Brakes (Independent, Oc-2 And Dual, Oc-3)
| R2***73 | Washer; (A), Washer, Washer; Paper, Washer; (Paper), Washer | 3 |
| R4***25 | Piston, Piston, Piston; (Sub For R26972) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107872, Re35785 Inboard Wet Disk Brakes (Independent, Oc-4 And Dual, Oc-5)
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107873 Inboard Planetary Final Drive (Oc-2)
| F2***3R | Shim, Shim; (B), Shim, Shim; (A) | 1 |
| R1***42 | Drive Shaft, Drive Shaft; (Sub For R92697) | 1 |
| R1***02 | Gear | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107874 Inboard Planetary Final Drive (Oc-3)
| F2***3R | Shim, Shim; (B), Shim, Shim; (A) | 1 |
| R1***77 | Planet Pinion, Planet Pinion | 3 |
| R1***23 | Needle Roller, Needle Roller | 186 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107875 Inboard Planetary Final Drive (Oc-4)
| F2***3R | Shim, Shim; (B), Shim, Shim; (A) | 1 |
| R1***23 | Needle Roller, Needle Roller | 186 |
| R1***24 | Washer, Washer | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107876 Inboard Planetary Final Drive (Oc-5)
| F2***3R | Shim, Shim; (B), Shim, Shim; (A) | 1 |
| R1***79 | Planet Pinion | 3 |
| R1***23 | Needle Roller, Needle Roller | 186 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107877 Axle Housing And Shaft (Oc-4)
| AR***50 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***55 | Bearing Cone; (A) (B), Bearing Cone; (A), Bearing Cone; (Sub R262976, This Application), Bearing Cone; Lh, Bearing Cone, Bearing Cone; 1 Speed (Type 3), Bearing Cone; (C: Type 3), Bearing Cone; (A) Lh, Bearing Cone, Bearing Cone; Inner, Bearing Cone; Rh, Bearing Cone; (A), Bearing Cone; (C) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107878 Axle Housing And Shaft (Oc-6)
| AR***50 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***55 | Bearing Cone; (A) (B), Bearing Cone; (A), Bearing Cone; (Sub R262976, This Application), Bearing Cone; Lh, Bearing Cone, Bearing Cone; 1 Speed (Type 3), Bearing Cone; (C: Type 3), Bearing Cone; (A) Lh, Bearing Cone, Bearing Cone; Inner, Bearing Cone; Rh, Bearing Cone; (A), Bearing Cone; (C) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107884,Re35782 Inboard Wet Disk Brakes (Independent, Oc-2 And Dual, Oc-3)
| R2***73 | Washer; (A), Washer, Washer; Paper, Washer; (Paper), Washer | 3 |
| R4***25 | Piston, Piston, Piston; (Sub For R26972) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107885,Re35783 Inboard Wet Disk Brakes (Independent, Oc-2 And Dual, Oc-3)
| R2***73 | Washer; (A), Washer, Washer; Paper, Washer; (Paper), Washer | 3 |
| R4***25 | Piston, Piston, Piston; (Sub For R26972) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107886, Re35784 Inboard Wet Disk Brakes (Independent, Oc-2 And Dual, Oc-3)
| R2***73 | Washer; (A), Washer, Washer; Paper, Washer; (Paper), Washer | 3 |
| R4***25 | Piston, Piston, Piston; (Sub For R26972) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107910 Differential Support (Oc-2)
| AR***37 | Seal, Seal | 1 |
| AR***69 | Seal, Seal | 1 |
| R1***26 | Pipe Plug, Pipe Plug; 3.175 mm (1/8"), Pipe Plug; 3.175 mm (1/8") 1/8" | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107915, Ar107921 Input Housing And Yoke (Oc-A)
| 11***47 | Cotter Pin; 3/16" X 4", Cotter Pin; 3/16" X 4", Cotter Pin, Cotter Pin; (A: Ar107915 - Input Housing Parts) 3/16" X 4" | 1 |
| 19***82 | Cap Screw; (B: Ar107921 - Input Yoke Parts) 1/2" X 5", Cap Screw; 1/2"X5", Cap Screw; 1/2" X 5" | 4 |
| 19***11 | Cap Screw; 1/2" X 5", (Use With R49722), Cap Screw; 1/2"X5", Cap Screw; 1/2" X 5" Upper, Cap Screw; 1/2" X 5" (A), Cap Screw; 1/2" X 5", Cap Screw; 7/8"X3", Cap Screw; 1/2" X 5" (Upper), Cap Screw; 1/2" X 5", (Sub 19h2120), Cap Screw; 1/2" X 5", (Use With Adjustable Gauge Wheel), Cap Screw; 1/2" X 5" (Not Used With Fenders), Cap Screw; 1/2" X 5", (With Two Spacers), Cap Screw; (B: Ar107921 - Input Yoke Parts) 1/2" X 5", Cap Screw; 1/2" X 5", (Use With Adjustable Gauge Wheels), Cap Screw; 1/2" X 5" | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107922,Re35786 Inboard Wet Disk Brakes (Independent, Oc-4 And Dual, Oc-5)
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107923,Re35787 Inboard Wet Disk Brakes (Independent, Oc-4 And Dual, Oc-5)
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107924,Re35788 Inboard Wet Disk Brakes (Independent, Oc-4 And Dual, Oc-5)
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107950 Axle Housing And Shaft (Oc-2)
| AR***50 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***55 | Bearing Cone; (A) (B), Bearing Cone; (A), Bearing Cone; (Sub R262976, This Application), Bearing Cone; Lh, Bearing Cone, Bearing Cone; 1 Speed (Type 3), Bearing Cone; (C: Type 3), Bearing Cone; (A) Lh, Bearing Cone, Bearing Cone; Inner, Bearing Cone; Rh, Bearing Cone; (A), Bearing Cone; (C) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Ar107951,Ar107861 Standard Differential (Oc-1)
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 10 |
| R1***39 | Cap Screw; 1/2" X 3-3/4", (Sub R44888), Cap Screw; (Sub For R44888), Cap Screw, Cap Screw, Cap Screw; 1/2" X 3-3/4", (Sub For R44888), Cap Screw; (Sub For R44888), Cap Screw; 12.700 X 95.250 mm (1/2" X 3-3/4") | 8 |
| R1***26 | Pinion; Sub For R68170, Pinion; (Sub For R68170), Pinion; (A: Quantity For One Axle), Pinion, Pinion | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Input Yoke
| R1***85 | Universal Joint Yoke; (Sub For Re45313) | 1 |
| R8***26 | Seal, Seal; (E: Upto Sr.No.5103-01***64, 5103s-01***61, 5203-00***61.), Seal; (E: Upto Sr.No 5103s-01***61, 5203-00***61.), Seal; (Use With R92297) | 1 |
| R9***97 | Yoke; (Sub Re45313) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33552 Offset Differential Support (Oc-A)
| AR***37 | Seal, Seal | 1 |
| AR***69 | Seal, Seal | 1 |
| R1***26 | Pipe Plug, Pipe Plug; 3.175 mm (1/8"), Pipe Plug; 3.175 mm (1/8") 1/8" | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33808 Spiral Bevel Input Pinion And Ring Gear Set (Oc-1)
| YZ***64 | Ring Gear And Pinion; L.H. Assembly, (Marked R84603 And Yz120999) (Also Order Re50113) (Sub For Re32102), Ring Gear And Pinion; (Marked R84603 And R92507 ) (Also Order Re50113 ) (Sub For Re32102) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33809 Spiral Bevel Input Pinion And Ring Gear Set (Oc-1)
| YZ***70 | Ring Gear And Pinion; R.H. Assembly, (Marked Yz120669 And Yz121002) (Sub For Re32101) (Also Order Re50113), Ring Gear And Pinion; (Marked Yz120669 And Yz121002 ) (Also Order Re50113 ) (Sub Re32101) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33810 Spiral Bevel Input Pinion And Ring Gear Set (Oc-2)
| RE***29 | Bevel Gear; (Marked R93046 And R93048 ) (Also Order Re50113), Bevel Gear; L.H. Assembly, (Marked R93046, R93048) (Also Order Re50113) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33812 Spiral Bevel Input Pinion And Ring Gear Set (Oc-3)
| YZ***68 | Ring Gear And Pinion; (Marked Yz121001 And Yz120667 ) (Also Order Re50113 ) (Sub Re32099) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33813 Spiral Bevel Input Pinion And Ring Gear Set-Front Diff
| YZ***74 | Ring Gear And Pinion; (Marked Yz121004 And Yz120673 ) (Also Order Re50113 ) (Sub Re32100) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33814 Spiral Bevel Input Pinion And Ring Gear Set (Oc-A)
| RE***20 | Kit; Front (With Disconnect) (Includes Shims, Washers And Cap Screws) (Marked Yz210663 And R89170), Kit; (Marked R84603 And R89170 ) (Sub Re28390 ) (Also Order Re50115), Kit; Front (With Disconnect) (Includes Shims, Washers And Cap Screws) (Marked Yz120663 And R89170) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33819 Input Yoke (Oc-2)
| R8***81 | Seal, Seal; (Sub Re45312) | 1 |
| R9***36 | Universal Joint Yoke; (Sub Re45314) | 1 |
| R9***60 | Universal Joint Yoke; (Sub For R42050) (Sub Re45314 And (4) 19h2960), Universal Joint Yoke; (Sub For R42050) (Sub Re45314), Universal Joint Yoke; (Sub For R42050) (Sub Re45314 And 19h2960), Universal Joint Yoke; (Sub For R42050 ) (Sub Re45314) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33820 Input Yoke (Oc-3)
| R4***53 | Universal Joint Yoke | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33821 Input Yoke (Oc-5)
| 14***74 | Screw; M10, (Use With 19m7668), Screw; M10 108 Used ;14'(4.3 M), 123 Used ;16'(4.9 M), 143 Used; 18'(5.5 M), Screw; (A) M10, (Sub For Et11535), Screw; (D: 21" X 7" X 12" 16pr Tire) M10, Screw; (A) (B) (C) (D) M10, Screw; M10, 6-Row Wide, 8-Row Narrow, 8-Row Wide And 10-Row Narrow, Screw; 10mm, Screw; M10 Rockshaft Rows, Screw; (C: For 8-Row Narrow) M10, Screw; M10 (Para L113893), Screw; 10 M, Screw; (A: Viscous Drive Lock-Up) M10, Screw; (A: Used In 5415 Orchard And 5415hc Tractors Too) (B: Used In 5615hc Tractor Too) (C: Used In 5715hc And 5715 Orchard Tractors Too) M10, Screw; (B: Low Profile Cab) M10, Screw; M10, (Sub 19m7382), Screw; (Sub For Ch12390), Screw; M10, (Use With Re19187 Or Re42730), Screw; M10, (Sub For 14m7140, This Application), Screw; M10 Rh, Lh, Nut; M10, (Sub For 06***13), Screw; (A: For 4-Row) M10, Screw; M10, (Hs Sae 8), Screw; (D: Heavy Duty Gudgeon W/3" Pin) M10, Screw; M10 (C), Screw; M10 (Also Order 15h624), Screw; (C: 5625 ( -00***72), 5725 ( -00***13)) M10, Nut; (Sub For Ffsb107411), Nut; M10, Nut; (Sub For J231210), Screw; (A: 18 Used On 1550mm (61") Bucket; 24 Used On 1850mm (73") Bucket), Screw; (A: For Tractor With 3 Steps, On The Left And On The Right) M10, Screw; (A: For 8-Row Narrow) M10, Screw; M10, (Sub For 14m7274, This Application), Screw; (Alt. Shield And Alt. To Alt. Bracket), Screw; M10, (D) (E), Screw; M10, (Use With Re31694), Screw; M10 Used On Rigid Euro For 918, 920, 922 And 925, Screw; M10 M10 (For L113893), Nut; (Sub For J950010), Screw; (A: Note; 9550 (70***01- ) 9550sh (70***01- )) M10, Screw; M10, (Use With Re19187), Screw; M10, (10), Screw; (B: Not On Bearing) M10, Screw; M10 Used With Deflector Only, Nut; M10, (Sub For Ffsb107411), Screw; 10x1,5mm, Screw; (A: Only For Germany) M10, Screw; M10, (Code 3108, 3109 And 3130), Screw; (A: Only For 1.8 M Pickup) M10, Screw; (C: ( -Xxxxxx) 7610-00***59 ; 7710-00***56 ; 7810-00***68) M10, Screw; (B: Straddle Mount/Isolated Open Operator Station) M10, Screw; M10 (A), Screw; Battery Terminal, Screw; (B: 5615: 00***21- And 5715: 01***20-) M10, Screw; M10 (Use With Kv26113), Screw; (B: For 6-Row Narrow, 6-Row 70 cm And 6-Row Wide) M10, Screw; M10 Rear, Screw; (A: Viscous Drive Lockup) M10, Screw; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) M10, Screw; M10 (Sub For 46***37 Or 03***13), Screw; M8, Screw; M10 M10 X 1, 5, Screw; (A: Fourth Step Option) M10, Screw; (C: For 12-Row Narrow (22-Inch)) M10, Screw; M10 (Battery Terminal), Screw; (A) M10, (Sub For Ch18389), Screw; (A: With Extra Hydraulic Oil Reservoir) M10, Screw; (A: Cis Version) M10 (8310, 8410), Screw; M10 Lh, Rh, Screw; M10 (Sub For Er022119 Appl), Screw; M10 (For Al110920), Screw; M10, Code 3111, 3114, 3140 And 3142, Screw; (K) M10, Screw; (B), Screw; (A: (-Xxxxxx) Sgb 00***57; Rg -00***81) M10, Screw; M10 L.H., Screw; M10 9000, Screw; (E) M10, (Use With Re19187), Screw; M10 (132", -68***74; 154", -68***09), Screw; M10 Sub For 14m7039 And 14m7060, Screw; (D: (Xxx- ) 8560-00***01;8760-00***01;8960-00***01) M10, Screw; M10 (Use With Re198656), Screw; M10 (Heavy Duty), Screw; (A: With Net Wrapping) M10, Screw; M10 (Use (2) For 2 Function Icv, (3) For 3 Function Icv), Screw; M10 (Sub For R73639), Screw; M10 (Sub For Er022118 Appl), Screw; (B: Use With Ar93448) M10, Screw; (C: For 8-Row Narrow, 8-Row 70 cm And 8-Row Wide) M10, Screw; M10, (2 Per Tine), Screw; (A: With Net Coveredge) M10, Screw; M10 (Sub For J231210), Screw; (C: For 12-Row Narrow) M10, Screw; M10, M18x1,5, Screw; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M10, Screw; (C: For 12-Row Narrow And 12-Row, 70 cm) M10, Screw; M10 (10), Screw; M10, When Using Dry Fertilizer Only, Screw; (H: 21" X 7" X 12" 16pr Tire) M10, Screw; (A: Cx - 5 Bolt Pattern) (B: Hx - 4 Bolt Pattern) (C: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; M10 (493, 1290 And 1291), Screw; (H: M10, Used With Deflector Only) M10, Screw; M10, (Delco-Remy), Screw; M10 (For Dc212852), Nut; M10, (Sub For Ffsb106074) (Sub For 14m7294), Screw; M10 Sub For J950010, Screw; (A: (-Xxxxxx) (Sgb) 7600-00***57; 7700-00***89; 7800-01***14) (C: (-Xxxxxx) (Rg) 7600-00***81; 7700-01***33; 7800-01***45) M10, Screw; M10 (D), Screw; M10 Not On Bearing, Screw; (D) (E) M10, Screw; (A: Parts Not Used On Balers With Bale Trak Plus Monitor) M10, Screw; (A: Option) M10, Screw; M10, (Delco Remy), Screw; M10 Lh, Screw; M10 X 1.5, Screw; M10 (For Dc22679) (Sub For 14h846), Screw; M10 (For Al119373), Screw; (C: For Electronic Wrapping Control Plus) M10, Screw; M10, (For Rows Five And Eight), Screw; M10 (Not Illustrated), Screw, Screw; (D: Used With Deflector Only) M10, Screw; M10 (Hi-Crop), Screw; (C: 5303 (00***08- ), 5403 (00***43- ), 5503 (00***01- ).) M10, Screw; M10, (Sub Cj17261), Screw; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M10, Screw; M10 (Use With Delco-Remy), Screw; M10 6-Row, 36-, 38- And 40-In.; 8-Row, 30-In.; 8-Row, 70 cm; 8-Row, 36-, 38- And 40-In.; 10-Row, 30-In., Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, This Application) Copper, Cuivre, Kupper, Rame, Cobre, Koppar, Screw; M10 (B) (C) (D), Screw; (A: With Creeper Transmission) M10, Screw; M10 9 Used On 335, 11 Used On 375, Screw; (B: For 6-Row Narrow, 6-Row 70 cm, 6-Row Wide And 8-Row Wide Skip-Row) M10, Screw; M10 (Sub For 44***63), Screw; M10, (Saran Cd), Screw; (B: With Cab) M10 (Sub For Er022119 Appl), Screw; (B: Low Profile) M10, Screw; M10x1,5, Screw; M10 (For Rows Five And Eight), Screw; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M10, Screw; M10, (Use With Code 3103, 3105, 3106), Screw; M10 (Sub For 07***03), Screw; (A: For Tractor With 2 Steps, On The Left And On The Right) M10, Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, R127288, This Application) Copper, Cuivre, Kupper, Rame, Cobre, Koppar, Screw; (A: For North America Only) M10, Screw; (C), Screw; (B: Oos Tractors) M10, Screw; M10, (Battery Terminal), Screw; M10, (Sub For Ch13637), Screw; (C: Viscous Drive Lock-Up) M10, Screw; (B: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; (A) 10mm, Screw; M10 (Sub For 14h1076), Screw; (B: With Creeper Transmission) M10, Screw; (A: Fuel Tank (30.6 Gallon )) M10, Screw; (A: For 8-Row Wide Skip-Row) M10, Screw; M10, (Sub For (2) Mg508083) Hex, Nut; M10, (Use With T127169), Screw; (A: For 1, 81 Meter Pickup) M10, Screw; (Sub For R140624), Screw; M10x1.5, Screw; M10 (For Cc22210), Screw; (C: W/O Hitch) M10, Screw; M10 Sub For 14m7148, Screw; (C: 5303 ( -00***07), 5403 ( -00***42).) M10, Screw; (A: With Hydraulic Cab Suspension (Hcs)) M10, Screw; (A: Only For 2.0 M Hiflow Pickup) M10, Screw; M10 (For Dc54470), Screw; (A) (B) M10, Screw; (A: Without Cab) M10 (Sub For Er022119 Appl), Screw; M10 (Sub For Er022118, Appl), Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R127288, R129609, This Application) Copper, Cuivre, Kupfer, Rame, Cobre, Koppar, Screw; (B: Hx - 4 Bolt Pattern) (E: 21"X7"X12"-16pr Severe Duty Ag Tire) M10, Screw; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) M10 (With Extendible Dipperstick), Screw; M10, In Air Duct, Screw; (C) M10, Screw; (B: For 8-Row Wide) M10, Screw; (A) M10, M10, Nut; M10, (Torque 23lb.Ft), Screw; M10, (Sub For W33464), Screw; (A: Only For 2, 0 M Hiflow Pickup) M10, Screw; (A: For 25 Knives Only) M10, Screw; M10 M10, Screw; (A: With Work Light (Sg2)) M10, Screw; (A: With 12v, 110ah Battery) M10, Screw; (A: Required For Field Conversion To Diverter Valve On Independent Marker System) M10, Screw; (Sub For Ch13637), Screw; M10 (Sub For 09***08), Screw; M10 (Use With (2) Kv22510), Screw; M10 Hs=10, Screw; M10 (Saran Cd), Screw; (Sub For T111619), Screw; M10, (Sub For (3) Mg508083), Screw; M10, (5420, 5440), Screw; M10, (Sub For Ch12390), Screw; (A), Screw; (A: Also For Tractors W/O Front Loader From Serial No. Xxxxxx) M10, Screw; M10, 3101, 3106, Screw; M10, Used With Deflector Only, Screw; M10 (Sub For J950010), Nut; M10, (Sub For J950010), Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) M10, Nut; (Sub For Ffsb106074) (Sub For 14m7294), Screw; M10, (Sub For Ch18389), Screw; (A: For 6-Row Narrow And 6-Row Wide) M10, Screw; (B) M10, Screw; M10 Jds118, Screw; (B: (Xxxxxx- ) 8560-00***43; 8760-00***19; 8960-00***61) M10, Screw; (B: 2 Used Per Tine) M10, Nut; (Sub For M520010), Screw; M10 (10 Used 435; 14 Used 535), Nut, Screw; M10, (Use (2) For 2 Function Icv, (3) For 3 Function Icv), Screw; M10 (Sub For J590010), Screw; M10 (Sub For Th0432902 ) (Sub For 04***02), Screw; M10, Up, Screw; (A: With Air Trailer Brake System) M10, Screw; M10 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal , (Sub For R129609, This Application) Copper, Cuivre, Kupfer, Rame, Cobre, Koppar, Screw; M10 (For Dc54470, Dc212852), Screw; M10 (Use With Re173973), Screw; (A: For 14 Knives Only) M10, Screw; (A: No Longer Required) M10, Screw; M10 (2 Per Tine), Screw; (A: ( -Xxxxxx) 8560-00***42; 8760-00***18; 8960-00***60) M10, Screw; M 10, Screw; M10, For Dry Fertilizer, Screw; (A: From Sr.No 5310s(00***84- ), 5410 (00***19- ), 5610 (00***01- ).) M10, Screw; M10 (M10), Screw; M10, Screw; (A) M10, Screw; M10 (For L113893), Screw; (A: With Autopowr Transmission) M10, Screw; (B: Viscous Drive Lock Up) M10, Screw; (B: For 8-Row Narrow And 8-Row Wide) M10, Screw; M10, M10, Screw; (A: For 4-Row And 6-Row Wide Skip-Row) M10 | 6 |
| 19***50 | Bolt; (B) M10 X 35, Bolt; M10 X 35 M10 X 35, Cap Screw; M10 X 35, (Sub For Ffsb109179, At200803, At155588), Bolt; M10 X 35 (Sub For 19m2976), Bolt; M10 X 35 (Hs=10.9), Bolt; M10 X 35 (Sub For 19m7835, This Application) (10.9), Cap Screw; M10 X 35, (Sub For T116883), Bolt; M10 X 35 Hs=10.9, Cap Screw; M10 X 35, (Sub For Ffsb109179), Cap Screw; (Sub For Ffsb107462), Cap Screw; M10 X 35, (Sub For Ffsb109179 And At155588), Bolt; (A) M10 X 35, Bolt; M10 X 35 M10x35 (10.9), Bolt; M10 X 35 (Hs, Head Marked 10.9), Cap Screw; M10 X 35, (Sub For J021035), Bolt; M10 X 35 M10x35, Bolt; M10 X 35 (Sub For 19m7835) (10.9), Cap Screw; M10 X 35, (Sub For Ffsb109188), Bolt; M10 X 35 (Sub For 19m2976, Cap Screw; M10 X 35 (Hs, Head Marked 10.9), Cap Screw; M10 X 35, (Sub For Ffsb107241 Or J011035), Bolt; M10x1.5x35, Bolt; M10 X 35 Sub For J021035, Bolt; M10 X 35 (Sub For J271035), Bolt; M10 X 35 (Sub For 19m7662, This Application, J27 Or, At255973, 1030 J901030) (Sub For J901035, J271035, 46***15), Bolt; M10 X 35 9000, Bolt; 3/8"X1-3/8", Cap Screw; (Sub For Ffsb107241) (Sub For J011035), Bolt; (B: With Cab) M10 X 35 (Sub For Er020854 Appl), Bolt; M10 X 35 (Sub For J011035), Bolt; (Sub For J901035), Bolt; M10 X 35 (10.9) (Sub For 19m7835, This Application), Bolt; M10 X 35 (467s Only), Bolt; M10 X 35 (Sub For J971035), Bolt; M10 X 35 (Three Function), Cap Screw, Bolt; M10 X 35 (Sub For 19m7835, This Application), Cap Screw; M10 X 35, (Sub For Ffsb109179, At200803 Or At155588), Bolt; M10 X 35, (456s Only), Bolt; M10 X 35, (Use With Re22240), Bolt; (B: (Xxxxxx-) 8560-00***43; 8760-00***19; 8950-00***61) M10 X 35 M10 X 35, Bolt; (A: Without Cab) M10 X 35 (Sub For Er020854 Appl), Cap Screw; M10 X 35, (Sub For J901035) (19m7169 Na), Cap Screw; M10 X 35, (Sub For At200803, At155588), Cap Screw; M10 X 35, (Sub For 04***15) (K2), Bolt; M10 X 35 10.9), Bolt; M10 X 35 (Sub For 19m7662, And 19m7402this Application), Cap Screw; (Sub For J071035), Bolt; M10 X 35 (Sub For J901035), Bolt; M10 X 35 (Sub For M810287, This Application), Bolt; (A: W/O Power Take-Off) M10 X 35, Cap Screw; M10 X 35, (Sub For J901035), Bolt; M10 X 35 (10.9), Bolt; M10 X 35 (Sub For J271035) (Also Order 24m7346), Bolt; (Sub For J021035), Bolt; 10x35mm, Bolt; M10 X 35 Lh, Cap Screw; M10 X 35, (Sub For Ffsb109207), Cap Screw; M10 X 35, (Sub For Ffsb107241), Cap Screw; (Sub For Ffsb109207), Cap Screw; (Sub For Ffsb107241), Bolt; (A: (-Xxxxxx) 4050-00***25; 4250-01***45; 4450-02***18) M10 X 35, Bolt; M10 X 35, Bolt; M10x35 (Sub For 19m7662), Bolt; (A: (-Xxxxxx) 4650-01***09; 4850-01***32) M10 X 35, Bolt; M10 X 35 Sub For 04***15, Cap Screw; (Sub For 04***15) (K2), Bolt; M10 X 35, (Sub For 19m7169), Bolt; M10 X 35 (Sub For J021035), Bolt; M10 X 35 (Sub For J071035), Bolt; (C: W/O Hitch) M10 X 35, Bolt; (A) M10x35, Cap Screw; M10 X 35, (Sub For J031035), Bolt, Cap Screw; M10 X 35, (Sub For Ffsb107462), Cap Screw; M10 X 35, (Sub For J921035), Bolt; (Sub For J011035), Cap Screw; (Sub For J011035), Bolt; (G: Tractors With Sound-Gard Body) M10 X 35, Bolt; M10 X 35 (J271035 Not Available), Cap Screw; (Sub For J021035), Bolt; M10 X 35 (Sub For Er020854 Appl), Bolt; M10 X 35, (Sub For 19m7169, This Application) For Row 7 Only With 36" Row Spacing, Bolt; M10 X 35, (Sub For 19m7160), Cap Screw; M10 X 35, (Also Order 12m7066 And 24m7346) (Sub For Ffsb109179, At200803 Or At155588), Cap Screw; M10 X 35, Bolt; M10x1.5x35 (For L64078), Bolt; (A: (-Xxxxxx) 4050-00***25; 4250-01***45; 4450-02***18) M10 X 35, Bolt; M10 X 35 Hs 10.9, Bolt; M10 X 35, (466s Only), Cap Screw; M10 X 35, (Sub For Ffsb109179 And At155588 And At200803), Bolt; M10 X 35, (Sub For 19m7169, This Application) For Row 2 Only With 36" Row Spacing, Bolt; (Sub For 04***15) (K2), Bolt; M10 X 35 (Sub For 19m7835, This Application)(10.9), Bolt; M10x35, Bolt; M10 X 35 (456s Only), Bolt; M10 X 35, Code 4102 (Af, Tf, Af001) | 6 |
| R7***16 | Universal Joint Yoke | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re33822 Input Yoke (Oc-4)
| R9***90 | Universal Joint Yoke | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re35839 Low Profile Differential Case
| 12***93 | U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16" | 10 |
| 15***75 | Pipe Plug; 1/4", Hex. Ctsk., 1/4", Pipe Plug; 1/4" 1/4"-18npt, Pipe Plug; (A: From Sr.No.5103e-00***54, 5103-01***65, 5103s-01***62.) 1/4", Pipe Plug; (For Ar58196), Pipe Plug; (A) 1/4", Pipe Plug; (A: From Sr.No 5310s(00***84- ), 5410(00***19- ), 5610(00***01- ).) 1/4", Pipe Plug; (A) (C) 1/4", Pipe Plug; Hex. Ctsk., 1/4" (Without Engine Coolant Heater), Pipe Plug; 1/4" -18npt, Pipe Plug; 1/4", (Use With Re31299), Pipe Plug; (A: From Sr.No.5103s-01***62, 5203-00***62, 5104/5204/5038d-00***01.) 1/4", Pipe Plug; (A: From Sr.No.5203-00***62, 5104-00***01, 5204-00***01.) 1/4", Pipe Plug, Pipe Plug; 1/4", (K1) (K2), Pipe Plug; 1/4", (Or Optional Gage Hose), Pipe Plug; (A) (C) 1/4", (Use With At16133), Pipe Plug; 1/4" (For At19509), Pipe Plug; 1/4", Hex. Ctsk., Pipe Plug; 1/4" 1/4"-18npt (Sub 15h685), Pipe Plug; 1/4", (Less Engine Coolant Heater), Pipe Plug; 1/4" (For Ar58196), Pipe Plug; 1/4" (Use With Ah203133), Pipe Plug; 1/4", (Code 3904), Pipe Plug; 1/4" 1/4" -18npt, Pipe Plug; 3/4", Pipe Plug; 1/4"-18npt, (Sub 15h685), Pipe Plug; 1/4", Pipe Plug; 1/4" (W/ At19509), Pipe Plug; 1/4", (Vickers 7075), Pipe Plug; 1/4", (Sub For M83753), Pipe Plug; 1/4", (Use With Ar74154 Water Manifold), Pipe Plug; 1/4" (Timing Gear Cover Acc Attaching Hole), Pipe Plug; 1/4", Pipe Plug; 1/4" 18npt, Pipe Plug; 1/4" 1/4”, Pipe Plug; 1/4"-18npt, Pipe Plug; 1/4" 1/4", Pipe Plug; Hex. Ctsk., 1/4" | 2 |
| 15***66 | Pipe Plug; 3/8" (Floor Plate) (Optional), Pipe Plug; 3/8", (Use With Re31299) (Without Turbocharger), Pipe Plug; 3/8", (Sub For Ch15002), Pipe Plug, Pipe Plug; Sq. Hd., 3/8", Pipe Plug; 3/8", (Use With R89790), Pipe Plug; (A) 3/8", (One Not Used W/ Re20889), Pipe Plug; 3/8" 3/8''-18nptf, Threads With Pre-Applied Sealant, Filets Enduits De Produit D'Etancheite, Mit Dichtmittel, Con Materiale Di Tenuta, Con Sellador, Med Taetningsmedel, Pipe Plug; 3/8", (Sub For R47395), Pipe Plug, Pipe Plug; 3/8" Front, Pipe Plug; 3/8" 3/8"-18 Npt, Pipe Plug; 3/8", Hex Ctsk., 3/4", Pipe Plug; 3/8" (One Not Used With Re20889), Pipe Plug; 3/8" (Use With Ar54556), Pipe Plug; 3/8", (Use With At16133), Pipe Plug; 3/8" 3/8"-18npt (Ord 15h695) With Square Head, Pipe Plug; 3/8" (Dn-03), Pipe Plug; 3/8" (4640, 4840), Pipe Plug; 3/8", Pipe Plug; 3/8" 3/8"-18npt Or Ord 15h695 = With Square Head, Pipe Plug; 3/8" (Bottom Of Intake Manifold, Pipe Plug; 3/8", Pipe Plug; (Use With Re31299) 3/8" (Without Turbocharger), Pipe Plug; (Bottom Of Intake Manifold), Pipe Plug; 9.525 mm (3/8"), Pipe Plug; 3/8", (Sub For Mg508010 Or 15h563), Pipe Plug; 3/8", (Not Used Appl), Pipe Plug; (A) 3/8", (Use 1 With R43851 Or R63285), Pipe Plug; (D) 3/8", Pipe Plug; 3/8", (Use With At206990), Pipe Plug; 3/8", Sq. Hd., Pipe Plug; (A) 3/8", Pipe Plug; 3/8", (Use With R108970), Pipe Plug; 3/8", (Sub For 15h563), Pipe Plug; 3/8" 3/8"-18npt, Pipe Plug; 3/8" (Sub For P45809), Pipe Plug; 3/8" (Front), Pipe Plug; 3/8", (Sub For P45809), Pipe Plug; 3/8", (Use With Ar54556), Pipe Plug; 3/8" 3/8"-18npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Bottom Of Intake Manifold), Pipe Plug; 3/8", Without Turbocharger, Pipe Plug; 3/8", (Front), Pipe Plug; (Use With R108970), Pipe Plug; 3/8" (Not Used Appl), Pipe Plug; 3/8" 3/8"-18 Npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Use With R104592, R134429 And 15h690), Pipe Plug; 3/8", (Use With At210378), Pipe Plug; 3/8" (Use With R89790), Pipe Plug; 3/8", (Less Starting Aid), Pipe Plug; 3/8", (Front), Pipe Plug; 3/8", Hex. Ctsk., Pipe Plug; (A: Threads With Pre-Applied Sealant) 3/8" 3/8''-18 Nptf | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re36420 Axle Housing And Shaft (Oc-6)
| AR***50 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***55 | Bearing Cone; (A) (B), Bearing Cone; (A), Bearing Cone; (Sub R262976, This Application), Bearing Cone; Lh, Bearing Cone, Bearing Cone; 1 Speed (Type 3), Bearing Cone; (C: Type 3), Bearing Cone; (A) Lh, Bearing Cone, Bearing Cone; Inner, Bearing Cone; Rh, Bearing Cone; (A), Bearing Cone; (C) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re37160,Re37161 Axle Housing And Shaft (Oc-B) (Oc-C)
| AR***50 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***55 | Bearing Cone; (A) (B), Bearing Cone; (A), Bearing Cone; (Sub R262976, This Application), Bearing Cone; Lh, Bearing Cone, Bearing Cone; 1 Speed (Type 3), Bearing Cone; (C: Type 3), Bearing Cone; (A) Lh, Bearing Cone, Bearing Cone; Inner, Bearing Cone; Rh, Bearing Cone; (A), Bearing Cone; (C) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re39762 Oscillating Dual Pivot (Oc-3)
| 11***15 | Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07***67-07***71), 625 (07***49-07***52), 630 (07***01-07***15)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 08***62), 620 (41386 - 08***96 )) (B: On Series 622 (41386-07***66), 625 (41386-07***48), 630 (41386-07***00)) (C: On Series 622 (07***72-08***61), 625 (07***53-08***97), 630 (07***16-08***54)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (08***63- ), 620 (08***97- )) (B: Starting From Series Number 622 (08***62- ), 625 (08***98- ), 630 (08***55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619) | 1 |
| 14***94 | Nut; 1/2" | 1 |
| 3***1 | Bushing, Bushing | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re42082 Inboard Planetary Final Drive
| F2***3R | Shim, Shim; (B), Shim, Shim; (A) | 1 |
| R1***42 | Drive Shaft, Drive Shaft; (Sub For R92697) | 1 |
| R1***15 | Hub; (Sub For R104821) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re42083,Re42084 Axle Housing And Shaft (Oc-D) (Oc-E)
| AR***50 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***55 | Bearing Cone; (A) (B), Bearing Cone; (A), Bearing Cone; (Sub R262976, This Application), Bearing Cone; Lh, Bearing Cone, Bearing Cone; 1 Speed (Type 3), Bearing Cone; (C: Type 3), Bearing Cone; (A) Lh, Bearing Cone, Bearing Cone; Inner, Bearing Cone; Rh, Bearing Cone; (A), Bearing Cone; (C) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re48704 Differential Bearing Quills (Oc-A)
| 14***23 | Nut; 1/2", Sq., Nut; 1/2", Nut; 1/2", Square, Nut; 1/2", (Not Used This Application), Nut; 1/2" Square, Nut; 1/2" | 2 |
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 12 |
| JD***59 | Bearing Cone; (A), Bearing Cone; Lh, Bearing Cone; Rh (Ord (2) L28376, L29000, L29001, L29002, (16) L40557), Bearing Cone; L.H., Bearing Cone, Bearing Cone; (A), Bearing Cone; (Use With Ar101616), Bearing Cone; (B), Bearing Cone, Bearing Cone; Opp. Ring Gear Side, Bearing Cone; (B), Bearing Cone; Opp, Ring Gear Side | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Re48704,Ar107861 Standard Differential (Oc-A) (Oc-1)
| 24***40 | Washer; (C) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm Hardened, Washer; 13 X 25 X 3 mm (Use With Ah163354), Washer; 13 X 25 X 3 mm, (Use With 135 Amp), Washer; 13 X 25 X 3 mm, (Included With Alternator), Washer; (A: Deluxe Pivot Front Fender) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (B), Washer, Washer; (A: 9550 (-69***00) 9550sh (-69***00)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Thrust Plate), Washer; 13 X 25 X 3 mm, (Sub For (2) Mg65319), Washer; 13 X 25 X 3 mm Hs, 10.9, M12 X 25, Washer; 13 X 25 X 3 mm 3.1 mm (.120"), Washer; (A) 13 X 25 X 3 mm, Washer; (C), Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480) (Sub 19m7788, This Application), Washer; 13 X 25 X 3 mm Steel, Washer; 13 X 25 X 3 mm (Sub For (6) Mg65319), Washer; 13 X 25 X 3 mm (A), Washer; 13 X 25 X 3 mm, (Use With Ah163354), Washer; (A) (B) 13 X 25 X 3 mm, Washer; (B: 5625 (00***12-), 5725 (00***01-)) 13 X 25 X 3 mm, Washer; 13x25x3 6mm, Washer; 13 X 25 X 3 mm, (C), Washer; 13x25x36mm, Washer; 13 X 25 X 3 mm (Sub For (10) Mg65319), Washer; 13x25x3,6mm, Washer; 13 X 25 X 3 mm Solenoid, Washer; 13 X 25 X 3 mm (Sub For W21628), Washer; 13 X 25 X 3 mm (Sub For T20168, This Application)(With Mechanical Front Wheel Drive), Washer; 13 X 25 X 3 mm (Export), Washer; 13x25x3.6mm, Washer; (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (A) (B), Washer; 13 X 25 X 3 mm (Pst), Washer; (B), Washer; 13 X 25 X 3 mm (Sub 19m7788), Washer; 13 X 25 X 3 mm, (Sub For (4) Mg65319), Washer, Washer; (A: 9550 (69***01-) 9550sh (69***01-)) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For T20168, This Application), Washer; 3x25x3mm, Washer; 13 X 25 X 3 mm (Hardened), Washer; 13 X 25 X 3 mm Hs 10.9, Washer; 13 X 25 X 3 mm (Qty. 4-Roll) (Qty. 8-Impeller), Washer; 13 X 25 X 3 mm, Washer; 13x25x3mm, Washer; 13 X 25 X 3 mm (Also Order 19m7789), Washer; (C: Deluxe End Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For Mg65319), Washer; (B) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3 mm Hs=10.9, Washer; 13 X 25 X 3 mm, (Sub For (12) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (4) Mg65319), Washer; 13 X 25 X 3 mm (Sub For (12) Mg65319), Washer; (A: (-Xxxxxx) 9200-00***31; 9300-00***49) 13 X 25 X 3 mm (Pst), Washer; 13 X 25 X 3 mm (Sub For R106714) (Also Order 19m7789), Washer; (C: Deluxe Cover) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm (Sub For (8) Mg65319), Washer; 13 X 25 X 3,6mm, Washer; 13 X 25 X 3 mm, (Sub For (8) Mg65319), Washer; (A: European Version) 13 X 25 X 3 mm, Washer; (K) 13 X 25 X 3 mm, Washer; 13 X 25 X 3 mm, (Not Illustrated), Washer; 13 X 25 X 3 mm (Sub For (2) Mg65319), Washer; (B) 13x25x3mm, Washer; (B: Ar107921 - Input Yoke Parts) 13 X 25 X 3 mm (Sub For R47172), Washer; 13 X 25 X 3mm, Washer; 13 X 25 X 3 mm (Use With R168479 Or R168480), Washer; 13 X 25 X 3 mm, (Do Not Use With R85363) | 10 |
| R1***39 | Cap Screw; 1/2" X 3-3/4", (Sub R44888), Cap Screw; (Sub For R44888), Cap Screw, Cap Screw, Cap Screw; 1/2" X 3-3/4", (Sub For R44888), Cap Screw; (Sub For R44888), Cap Screw; 12.700 X 95.250 mm (1/2" X 3-3/4") | 8 |
| R1***26 | Pinion; Sub For R68170, Pinion; (Sub For R68170), Pinion; (A: Quantity For One Axle), Pinion, Pinion | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1200 : Spiral Bevel Input Pinion And Ring Gear Set
| RE***30 | Bevel Gear Drive; (Marked R92389 And R93049 ) (Also Order Re50113), Bevel Gear Drive; R.H. Assembly, (Marked R92389 And R93049) (Also Order Re50113) | 1 |
Axle Teammate I 1400 Axle
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Ar107910 Differential Support (Oc-2)
| AR***37 | Seal, Seal | 1 |
| AR***69 | Seal, Seal | 1 |
| R1***26 | Pipe Plug, Pipe Plug; 3.175 mm (1/8"), Pipe Plug; 3.175 mm (1/8") 1/8" | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Ar107921 Yoke Disconnect (Oc-A)
| 19***61 | Cap Screw; (Sub For Ffsb109214), Bolt; (A), Bolt; (A: Mechanical Front Wheel Drive-Axle With Tls) M12 X 50 (10.9), Cap Screw; M12 X 50, (Front), Bolt; M12 X 50 (10.9), Bolt; M12 X 50 Ils, Bolt; M12 X 50 (Rear Holes), Bolt; M12 X 50 Hs=10.9 Rh, Bolt; (A: 7220 (01***51-)) M12 X 50, Bolt; (A: Range Shift Lever On L.H. Side And Gear Shift Lever On R.H. Side) M12 X 50, Bolt; (D: (Xxxxxx-) 7600-00***05; 7700-01***44; 7800-01***43) M12 X 50, Bolt; M12 X 50 (Hs, Head Marked 10.9), Bolt; (A: European Version) M12 X 50, Bolt; M12 X 50 (Double Bank Pump), Bolt; M12 X 50 Straight Fluted Only, Bolt; M12 X 50 (Sub For J011250), Bolt; (Sub For 03***22) (K2), Bolt; M12 X 50 M12x50 (10.9), Bolt; (E: W/O Mechanical Front Wheel Drive) M12 X 50 Hs=10.9, Bolt; M12 X 50 (Hs 10.9), Bolt; (A: With Tls) M12 X 50, Bolt; M12 X 50 Pst, Cap Screw; M12 X 50, (Sub For Ffsb109214), Bolt; M12x50, Bolt; M12 X 50 Hs=10.9, Bolt; M12 X 50 (1050 Tractor), Cap Screw, Bolt; M12 X 50 (Sub For J901250), Bolt; (D: (Xxxxxx-) 7610-01***73, 7710-01***16; 7810-01***26) M12 X 50, Bolt; M12 X 50 (Use With Re245772 And Re245774), Bolt; M12 X 50 Rh, Bolt; (Sub For J011250), Cap Screw; (Sub For J011250), Bolt; (A: Mechanical Front Wheel Drive- Axle With Tls) M12 X 50 (10.9), Bolt; M12 X 50 (Use With Ah204644), Bolt; M12 X 50 M13, Bolt; M12 X 50, Bolt; M12 X 50 Hs 10.9, Bolt; M12 X 50 (Use With Re39399), Cap Screw; (Front And Rear), Bolt; (A: (-Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) M12 X 50, Bolt; (A: Fwd-Axle With Tls) M12 X 50 (10.9), Bolt; M12 X 50 Straight Fluted, Bolt; M12 X 50 (Hs=10.9), Cap Screw; M12 X 50 | 4 |
| 19***43 | Bolt; (B: Dubuque (To) Esn -70***94) (C: Saran (Cd) Esn -Xxxxxx) M12 X 90, Bolt; M12 X 90, (Order Axe11971), Bolt; M12 X 90 Hs 10.9, Bolt; M12 X 90 (Valve Support To Frame Through Isolators- Two Holes To Front Of Tractor), Bolt; M12x90, Bolt; M12 X 90 Europe, Bolt; M12 X 90 (10.9), Bolt; M12 X 90 North America, Bolt; M12 X 90 Hs, Bolt; M12 X 90 (Hs, Head Marked 10.9), Bolt; M12 X 90 Hs= 10.9, Bolt; M12 X 90 (Hs=10.9), Bolt; (A: Dubuque (To) Esn -70***94) (B: Saran (Cd) Esn -Xxxxxx) M12 X 90, Bolt; M12 X 90 Hs=10.9, Bolt; (A: Dubuque (T0) Esn -70***94) (B: Saran (Cd) Esn -Xxxxxx) M12 X 90, Cap Screw; M12 X 90, (Sub For Ffsb109218), Bolt; M12 X 90, Incld In 35, Cap Screw; M12 X 90, Bolt; M12 X 90 (Sub For 19m7819 Appl), Bolt; M12 X 90 Stabilzier Pin, Bolt; (A: 5303 (00***14-), 5403 (00***76-), 5503 (00***01-).) M12 X 90 (Hs=10.9), Cap Screw; M12 X 90, (Sub For J921290), Cap Screw; (Sub For Ffsb109218), Bolt; (A) M12 X 90, Cap Screw; M12 X 90, (Sub For J901290), Bolt; M12 X 90 M12 X 90, Bolt; M12 X 90, Bolt; M12 X 90 (10 9), Bolt; M12 X 90 (10,9), Bolt; (B: Dubuque (To) Esn -70***94) (C: Saran (Cd) Esn -Xxxxxx) M12 X 90, Bolt; (A: Dubuque (T0) Esn -70***94) (B: Saran (Cd) Esn -Xxxxxx) M12 X 90, Bolt; M12 X 90 (A), Bolt; (B: Dubuque (T0) Esn -70***94) (C: Saran (Cd) Esn -Xxxxxx) M12 X 90, Bolt; M12 X 90 (Sub For 19m7414), Bolt; M12 X 90 (B), Bolt; (A: Syncshuttle Transmission - 5420: Sn 44***60-, 5520: Sn 45***01-) M12 X 90 (Hs=10.9), Bolt | 2 |
| 40***63 | Snap Ring; (Sub For 40m7178), Snap Ring, Snap Ring; (Sub For L25837 And 40m7178), Snap Ring, Snap Ring; (B: Ar107921 - Input Yoke Parts) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35660 Axle Housing And Shaft (Oc-2)
| AR***27 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***72 | Bearing Cup; (Inner), Bearing Cup, Bearing Cup; Inner, Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35661, Re35840 Inboard Wet Disk Brakes (Independent, Oc-2 And Dual, Oc-3)
| R1***39 | Brake Disk; (Sub For R97799), Brake Disk; (B) (Sub For R97799) | 1 |
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35662,Re35841 Inboard Wet Disk Brakes (Independent, Oc-2 And Dual, Oc-3)
| R1***39 | Brake Disk; (Sub For R97799), Brake Disk; (B) (Sub For R97799) | 1 |
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35663,Re35842 Inboard Wet Disk Brakes (Independent, Oc-2 And Dual, Oc-3)
| R1***40 | Brake Disk; (Sub For R98154) | 1 |
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35664,Re35843 Inboard Wet Disk Brakes (Independent, Oc-2 And Dual, Oc-3)
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35665 Standard Differential (Oc-1)
| R1***26 | Pinion; Sub For R68170, Pinion; (Sub For R68170), Pinion; (A: Quantity For One Axle), Pinion, Pinion | 4 |
| R4***88 | Cap Screw, Cap Screw; 12,7 X 95,25 mm (1/2" X 3-3/4") (For R71529), Cap Screw; 1/2" X 3-3/4", Cap Screw; (Sub R115439) | 8 |
| R5***94 | Washer; (Less Differential Lock), Washer; (C: Diff Lock), Washer; (A: Less Differential Lock), Washer; Tk=0,4mm (Sub For T16911), Washer; (A: Standard) (B: No-Spin), Washer; Aluminum, Washer; (A) (B), Washer; (No Differential Lock), Washer; (With Differential Lock), Washer; (W/O Differential Lock), Washer; (Sub For T16911), Washer; (Less Differential Lock), Washer; Differential Lock Holes, Washer; (A), Washer, Washer, Washer; Tk=0.4mm (Sub For T16911), Washer; 14.605 X 22.098 X 1.524 mm, (Differential Lock Holes), Washer; (B), Washer; (Tractors Less Differential Lock), Washer; Tk= 0.4mm | 4 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35665,Re35667 Differential Bearing Quills (Standard, Oc-1 And No-Spin, Oc-2)
| 14***23 | Nut; 1/2", Sq., Nut; 1/2", Nut; 1/2", Square, Nut; 1/2", (Not Used This Application), Nut; 1/2" Square, Nut; 1/2" | 2 |
| JD***55 | Bearing Cone; (A) (B), Bearing Cone; (A), Bearing Cone; (Sub R262976, This Application), Bearing Cone; Lh, Bearing Cone, Bearing Cone; 1 Speed (Type 3), Bearing Cone; (C: Type 3), Bearing Cone; (A) Lh, Bearing Cone, Bearing Cone; Inner, Bearing Cone; Rh, Bearing Cone; (A), Bearing Cone; (C) | 1 |
| JD***59 | Bearing Cone; (A), Bearing Cone; Lh, Bearing Cone; Rh (Ord (2) L28376, L29000, L29001, L29002, (16) L40557), Bearing Cone; L.H., Bearing Cone, Bearing Cone; (A), Bearing Cone; (Use With Ar101616), Bearing Cone; (B), Bearing Cone, Bearing Cone; Opp. Ring Gear Side, Bearing Cone; (B), Bearing Cone; Opp, Ring Gear Side | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35666 Standard Differential (Oc-3)
| 3***8 | Plug, Clamp, Plug; (B) 1-5/16", Plug; 1-5/16", Plug; (A) (C) 1-5/16" | 2 |
| R1***26 | Pinion; Sub For R68170, Pinion; (Sub For R68170), Pinion; (A: Quantity For One Axle), Pinion, Pinion | 4 |
| R4***88 | Cap Screw, Cap Screw; 12,7 X 95,25 mm (1/2" X 3-3/4") (For R71529), Cap Screw; 1/2" X 3-3/4", Cap Screw; (Sub R115439) | 8 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35666, Re35668 Differential Bearing Quills (Oc-3)
| 14***23 | Nut; 1/2", Sq., Nut; 1/2", Nut; 1/2", Square, Nut; 1/2", (Not Used This Application), Nut; 1/2" Square, Nut; 1/2" | 2 |
| JD***55 | Bearing Cone; (A) (B), Bearing Cone; (A), Bearing Cone; (Sub R262976, This Application), Bearing Cone; Lh, Bearing Cone, Bearing Cone; 1 Speed (Type 3), Bearing Cone; (C: Type 3), Bearing Cone; (A) Lh, Bearing Cone, Bearing Cone; Inner, Bearing Cone; Rh, Bearing Cone; (A), Bearing Cone; (C) | 1 |
| JD***59 | Bearing Cone; (A), Bearing Cone; Lh, Bearing Cone; Rh (Ord (2) L28376, L29000, L29001, L29002, (16) L40557), Bearing Cone; L.H., Bearing Cone, Bearing Cone; (A), Bearing Cone; (Use With Ar101616), Bearing Cone; (B), Bearing Cone, Bearing Cone; Opp. Ring Gear Side, Bearing Cone; (B), Bearing Cone; Opp, Ring Gear Side | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35667 Standard Differential (Oc-2)
| R4***88 | Cap Screw, Cap Screw; 12,7 X 95,25 mm (1/2" X 3-3/4") (For R71529), Cap Screw; 1/2" X 3-3/4", Cap Screw; (Sub R115439) | 8 |
| R5***94 | Washer; (Less Differential Lock), Washer; (C: Diff Lock), Washer; (A: Less Differential Lock), Washer; Tk=0,4mm (Sub For T16911), Washer; (A: Standard) (B: No-Spin), Washer; Aluminum, Washer; (A) (B), Washer; (No Differential Lock), Washer; (With Differential Lock), Washer; (W/O Differential Lock), Washer; (Sub For T16911), Washer; (Less Differential Lock), Washer; Differential Lock Holes, Washer; (A), Washer, Washer, Washer; Tk=0.4mm (Sub For T16911), Washer; 14.605 X 22.098 X 1.524 mm, (Differential Lock Holes), Washer; (B), Washer; (Tractors Less Differential Lock), Washer; Tk= 0.4mm | 4 |
| R5***05 | Bushing, Bushing | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35668 Standard Differential
| 3***8 | Plug, Clamp, Plug; (B) 1-5/16", Plug; 1-5/16", Plug; (A) (C) 1-5/16" | 2 |
| R4***88 | Cap Screw, Cap Screw; 12,7 X 95,25 mm (1/2" X 3-3/4") (For R71529), Cap Screw; 1/2" X 3-3/4", Cap Screw; (Sub R115439) | 8 |
| R5***05 | Bushing, Bushing | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35669 Differential Case To Quill Oil Lines (Oc-3)
| AR***01 | Oil Line; Pressure, Oil Line | 1 |
| AR***49 | Fitting, Fitting | 1 |
| AR***50 | Fitting, Fitting | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35669, Re38716 Differential Lock (Oc-3)
| 19***64 | Cap Screw; (Use With R89118 And R84993), Cap Screw; 7/16" X 1-1/8", (Use With Ar56010), Cap Screw; (A) 7/16" X 1-1/8", Cap Screw; 7/16" X 1-1/8" (Use With 24h1327, N219487, N218806 Or N218807, N218601 And K40006), Cap Screw; 7/16" X 1-1/8" (Use With Ar56010), Cap Screw; 7/16" X 1-1/8" (Use With Re55997), Cap Screw; 7/16" X 1-1/8" (Sae 8), Cap Screw; 7/16" X 1-1/8", Cap Screw; 7/16" X 1-1/8" (Hs, Sae 8), Cap Screw, Cap Screw; 7/16" X 1-1/8" (Use With R89118), Cap Screw; 7/16" X 1-1/8", Cap Screw; 7/16" X 1-1/8", (Use With R89118 And R84993) | 12 |
| 34***27 | Spring Pin; 5/16" X 1", 1000 Rpm, Spring Pin; 5/16" X 1" Sub For Lvu12902, Spring Pin; 5/16" X 1", Spring Pin; 5/16" X 1" (Sub For 34h116), Spring Pin; 5/16" X 1" Sub For 34h116, Spring Pin; 5/16" X 1" (Sub For Lvu12902), Spring Pin, Spring Pin; 5/16" X 1", Spring Pin; 5/16" X 1" (4 Used-Hydrostatic Drive; 5 Used-Posi-Torq Drive), Spring Pin; 5/16" X 1", (Sub For Mg88005), Spring Pin; 5/16" X 1" (4 Used, Hydrostatic Drive; 5 Used, Posi- Torq Drive), Spring Pin; 5/16" X 1", (4 Used, Hydrostatic Drive; 5 Used, Posi-Torq Drive), Spring Pin; 5/16" X 1", (1000 Rpm), Spring Pin; 5/16"X1" | 3 |
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35669,Re38716 Differential Bearing Quills (Oc-3)
| 14***23 | Nut; 1/2", Sq., Nut; 1/2", Nut; 1/2", Square, Nut; 1/2", (Not Used This Application), Nut; 1/2" Square, Nut; 1/2" | 2 |
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 1 |
| AR***86 | Seal, Seal | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35688 Standard Differential Case (Oc-1)
| 12***01 | Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036) | 10 |
| 15***71 | Pipe Plug; (A) 3/8", Pipe Plug; 3/8", ( 15h666 No Longer Used), Pipe Plug; 3/8", Pipe Plug; 3/8" 3/8", Pipe Plug; 3/8", Hex, Csk, Pipe Plug; 3/8" | 2 |
| 19***79 | Cap Screw; 1/2" X 1-3/8" (Sae 8), Cap Screw; 1/2" X 1-3/8", Cap Screw; 1/2" X 1-3/8", (Or), Cap Screw; 1/2" X 1-3/8", Hs 10.9, Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00***46; 8650-00***79) 1/2" X 1-3/8", Cap Screw; 1/2" X 1-3/8", (Sub For R41049 Or R52634, This Application), Cap Screw; 1/2" X 1-3/8" (Sub For R52634, This Application), Cap Screw; 1/2" X 1-3/8" (Sub For R41049, Or R52634this Application), Cap Screw; (A) (B) 1/2" X 1-3/8", Cap Screw; 1/2" X 1-3/8" 12.700 X 35.052 mm (1/2" X 1.380") (Sub For R41049, R52634), Cap Screw; 1/2" X 1-3/8" (Sub R41049, This Application Or R52634), Cap Screw; 1/2" X 1-3/8", Cap Screw; 1/2" X 1-3/8", (Rc And St), Cap Screw; 1/2" X 1-3/8", (Ru), Cap Screw; 1/2" X 1-3/8" (Hs, Sae 8), Cap Screw; (Sub For R41049 Or R52634) This Application, Cap Screw; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2" X 1-3/8", Cap Screw; 1/2" X 1-3/8" (Dh-01, Dh-02), Cap Screw; 1/2" X 1-3/8", (1508), Cap Screw; 1/2" X 1-3/8", (Hc), Cap Screw; 1/2" X 1-3/8", Hs Sae 8, Cap Screw; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2" X 1-3/8", Cap Screw; (A) 1/2" X 1-3/8", Cap Screw; 1/2" X 1-3/8", (Sub For R52634, This Application), Cap Screw; (Sub For R41049 Or R52634, This Application), Cap Screw; (Sub R41049 Or R52634, This Application), Cap Screw; 1/2" X 1-3/8", (Sae 8), Cap Screw; 1/2" X 1-3/8" 12.700 X 34.925 mm (1/2" X 1-3/8") (Sub For R41049, Or R52634, This Application), Cap Screw; 1/2" X 1-3/8" Sub For R52634; This Appl, Cap Screw; (Sub For R41049) (Sub For R52634), Cap Screw; 1/2" X 1-3/8" (Sub For R41049) (Sub For R52634), Cap Screw; Hs, Sae 8, 1/2" X 1-3/8", (1508), Cap Screw; 1/2" X 1-3/8" (Sub For R41049 Or R52634, This Application), Cap Screw; (Sub For R41049 Or R52634), Cap Screw; 1/2" X 1-3/8", (Use With R54978) | 10 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35690 Inboard Planetary Final Drive (Oc-2)
| R1***43 | Pinion | 1 |
| R1***82 | Needle Roller, Needle Roller; (Sub For Re166221), Needle Roller | 144 |
| R1***83 | Washer, Washer | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35691 Inboard Planetary Final Drive (Oc-3)
| R1***82 | Needle Roller, Needle Roller; (Sub For Re166221), Needle Roller | 144 |
| R1***83 | Washer, Washer | 3 |
| R1***79 | Thrust Washer, Thrust Washer; (Sub For R109084), Thrust Washer, Thrust Washer; (Sub For R109084) | 6 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35692 Inboard Planetary Final Drive (Oc-4)
| R1***82 | Needle Roller, Needle Roller; (Sub For Re166221), Needle Roller | 144 |
| R1***83 | Washer, Washer | 3 |
| R1***79 | Thrust Washer, Thrust Washer; (Sub For R109084), Thrust Washer, Thrust Washer; (Sub For R109084) | 6 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35693 Inboard Planetary Final Drive (Oc-5)
| 19***50 | Cap Screw; 5/8" X 6-3/4", Cap Screw; 5/8" X 6-3/4" Hs Sae 8, Cap Screw; 5/8" X 6-3/4" (Hs, Sae 8) | 12 |
| R1***97 | Pinion; (Sub For R71241), Pinion | 3 |
| R1***90 | Planet Pinion Carrie; (Sub Re157472, R134085, R127748, (3) R134086, (3) R125362 And (3) 14m7452) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35706 Input Housing (Oc-1)
| 11***32 | Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218) | 1 |
| A4***0R | O-Ring; (Sub For Lvu23740), O-Ring; (Use With Re188948), O-Ring; (Sub An130937), O-Ring; (Use With R67064 Or R72672), O-Ring; (Use With Re34518), O-Ring; (Sub For U10289), O-Ring; 6 mm X 40 mm (7/32" X 1-1/2" I.D.), O-Ring; 1.475" X 0.210", O-Ring; (Use With Re34788 Or Re40363), O-Ring; (Use With Re191959 Or Re191960), O-Ring; (A: 8520 (02***33- )), O-Ring; (A), O-Ring; 37.465 X 5.334 mm (1.475" X 0.210"), O-Ring; 37.465 X 5.334 mm, O-Ring, O-Ring; (Use With Re191958), O-Ring; (Use With Re56329 Or Re56330 Or Re56537 Or Re56538), O-Ring; 6 mm X 40 mm (7/32" X 1-1/2") (I.D.), O-Ring, O-Ring; 5.60 mm X 40 mm (7/32" X 1-1/2") I.D., O-Ring; No Longer Used | 1 |
| JD***80 | Bearing Cup; (A: Ar107915 - Input Housing Parts) (Sub Re49486), Bearing Cup, Bearing Cup; (30km/H, 40km/H), Bearing Cup, Bearing Cup; (40km/H), Bearing Cup; (A) (Use With R49840), Bearing Cup; (A: Included In Ar63947), Bearing Cup; (Sub For R61921), Bearing Cup; (A: Ar107915 - Input Housing Parts), Bearing Cup; (Sub Re49486) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35707 Spiral Bevel Input Pinion And Ring Gear Set (Oc-1)
| YZ***94 | Bevel Gear Drive; (Marked R84542 And R84988 ) (Also Order Re50114 ) (Sub For Re24938) | 1 |
| YZ***67 | Washer | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35708 Spiral Bevel Input Pinion And Ring Gear Set (Oc-1)
| YZ***95 | Bevel Gear Drive; (Marked R84661 And R85015 ) (Also Order Re50114 ) (Sub For Re24917) | 1 |
| YZ***67 | Washer | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35713 Spiral Bevel Input Pinion And Ring Gear Set (Oc-A)
| RE***91 | Gear; (Marked R84988 And R88605 ) (Also Order Re50115), Gear; L.H. Assembly, (Marked R84988 And R88605) (Also Order Re50115) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re35714 Input Yoke (Oc-1)
| R1***00 | Seal; (B: Ar107921 - Input Yoke Parts), Seal; (Sub Re45315), Seal, Seal | 1 |
| R5***04 | Universal Joint Yoke; (Sub Re45317), Universal Joint Yoke; (Sub Re45317) | 1 |
| R9***34 | Universal Joint Yoke; (Sub Re45317) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re36351 Input Housing (Oc-1)
| 11***32 | Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218) | 1 |
| A4***0R | O-Ring; (Sub For Lvu23740), O-Ring; (Use With Re188948), O-Ring; (Sub An130937), O-Ring; (Use With R67064 Or R72672), O-Ring; (Use With Re34518), O-Ring; (Sub For U10289), O-Ring; 6 mm X 40 mm (7/32" X 1-1/2" I.D.), O-Ring; 1.475" X 0.210", O-Ring; (Use With Re34788 Or Re40363), O-Ring; (Use With Re191959 Or Re191960), O-Ring; (A: 8520 (02***33- )), O-Ring; (A), O-Ring; 37.465 X 5.334 mm (1.475" X 0.210"), O-Ring; 37.465 X 5.334 mm, O-Ring, O-Ring; (Use With Re191958), O-Ring; (Use With Re56329 Or Re56330 Or Re56537 Or Re56538), O-Ring; 6 mm X 40 mm (7/32" X 1-1/2") (I.D.), O-Ring, O-Ring; 5.60 mm X 40 mm (7/32" X 1-1/2") I.D., O-Ring; No Longer Used | 1 |
| JD***80 | Bearing Cup; (A: Ar107915 - Input Housing Parts) (Sub Re49486), Bearing Cup, Bearing Cup; (30km/H, 40km/H), Bearing Cup, Bearing Cup; (40km/H), Bearing Cup; (A) (Use With R49840), Bearing Cup; (A: Included In Ar63947), Bearing Cup; (Sub For R61921), Bearing Cup; (A: Ar107915 - Input Housing Parts), Bearing Cup; (Sub Re49486) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re36424 Axle Housing And Shaft (Oc-2)
| AR***27 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***72 | Bearing Cup; (Inner), Bearing Cup, Bearing Cup; Inner, Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37185 Axle Housing And Shaft (Oc-4)
| 15***59 | Pipe Plug; (A: 12 Speed) 1/4", Pipe Plug; (A: For Commandcenter) 1/4", Pipe Plug; 1/4" (12-Speed), Pipe Plug; 1/4" (Engine Marked 3tne74c-Ejuv), (Sub For Epc200683), Pipe Plug; (A: For Prodrive) 1/4", Pipe Plug; 1/4", (1 Used Dual) (2 Used Triple), Pipe Plug; 1/4" Use Ty9374, Pipe Plug; Hex. Ctsk., 1/4", Pipe Plug; 1/4", (Sub For R106103), Pipe Plug; 1/4", (3020*), Pipe Plug; 1/4" (Ea-D, De-01), Pipe Plug; 1/4" (Dh-01, Dh-02, Dn-03, Hc-D And Nb-D), Pipe Plug; (B: 24 Speed) 1/4", Pipe Plug; 1/4" (Engine Marked 3tne74c-Juv), Pipe Plug, Pipe Plug; 1/4", (Ha-D, Hb-D, Na-D), Pipe Plug; 6.35mm (1/4"), Pipe Plug; (B) 1/4", Pipe Plug; 1/4" (A), Pipe Plug; 1/4", (3020e), Pipe Plug; 1/4", (1 Used, Dual) (2 Used, Triple), Pipe Plug; 1/4", Pipe Plug; 1/4", (3020&), Pipe Plug; (A) (B) (C) 1/4", Pipe Plug; 1/4", Hex, Csk, Pipe Plug; 1/4", (3020l), Pipe Plug; 1/4", (Sub For Epc200683), Pipe Plug; 1/4", (Code 3300 And 3303), Pipe Plug; 1/4", (Use With R36902 Or R40632), Pipe Plug; 1/4" (Sub For Epc200683), Pipe Plug; 1/4" Sub Re168481, Pipe Plug; 1/4", Pipe Plug; 1/4" (24-Speed), Pipe Plug; Use Ty9374, Pipe Plug; 1/4", (Dual) (2 Used Triple), Pipe Plug; 1/4", (Na-D), Pipe Plug; (A: Less Rockshaft) 1/4", Pipe Plug; (Sub For Th111958), Pipe Plug; (A) 1/4", Pipe Plug; 1/4" 1/4" | 1 |
| AR***95 | Housing; (Marked R76839) | 1 |
| AR***50 | Seal, Seal | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37190 Axle Housing And Shaft (Oc-9)
| 15***59 | Pipe Plug; (A: 12 Speed) 1/4", Pipe Plug; (A: For Commandcenter) 1/4", Pipe Plug; 1/4" (12-Speed), Pipe Plug; 1/4" (Engine Marked 3tne74c-Ejuv), (Sub For Epc200683), Pipe Plug; (A: For Prodrive) 1/4", Pipe Plug; 1/4", (1 Used Dual) (2 Used Triple), Pipe Plug; 1/4" Use Ty9374, Pipe Plug; Hex. Ctsk., 1/4", Pipe Plug; 1/4", (Sub For R106103), Pipe Plug; 1/4", (3020*), Pipe Plug; 1/4" (Ea-D, De-01), Pipe Plug; 1/4" (Dh-01, Dh-02, Dn-03, Hc-D And Nb-D), Pipe Plug; (B: 24 Speed) 1/4", Pipe Plug; 1/4" (Engine Marked 3tne74c-Juv), Pipe Plug, Pipe Plug; 1/4", (Ha-D, Hb-D, Na-D), Pipe Plug; 6.35mm (1/4"), Pipe Plug; (B) 1/4", Pipe Plug; 1/4" (A), Pipe Plug; 1/4", (3020e), Pipe Plug; 1/4", (1 Used, Dual) (2 Used, Triple), Pipe Plug; 1/4", Pipe Plug; 1/4", (3020&), Pipe Plug; (A) (B) (C) 1/4", Pipe Plug; 1/4", Hex, Csk, Pipe Plug; 1/4", (3020l), Pipe Plug; 1/4", (Sub For Epc200683), Pipe Plug; 1/4", (Code 3300 And 3303), Pipe Plug; 1/4", (Use With R36902 Or R40632), Pipe Plug; 1/4" (Sub For Epc200683), Pipe Plug; 1/4" Sub Re168481, Pipe Plug; 1/4", Pipe Plug; 1/4" (24-Speed), Pipe Plug; Use Ty9374, Pipe Plug; 1/4", (Dual) (2 Used Triple), Pipe Plug; 1/4", (Na-D), Pipe Plug; (A: Less Rockshaft) 1/4", Pipe Plug; (Sub For Th111958), Pipe Plug; (A) 1/4", Pipe Plug; 1/4" 1/4" | 1 |
| AR***56 | Housing; (Marked R76533) | 1 |
| AR***27 | Seal, Seal | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37195 Axle Housing And Shaft (Oc-2)
| 15***59 | Pipe Plug; (A: 12 Speed) 1/4", Pipe Plug; (A: For Commandcenter) 1/4", Pipe Plug; 1/4" (12-Speed), Pipe Plug; 1/4" (Engine Marked 3tne74c-Ejuv), (Sub For Epc200683), Pipe Plug; (A: For Prodrive) 1/4", Pipe Plug; 1/4", (1 Used Dual) (2 Used Triple), Pipe Plug; 1/4" Use Ty9374, Pipe Plug; Hex. Ctsk., 1/4", Pipe Plug; 1/4", (Sub For R106103), Pipe Plug; 1/4", (3020*), Pipe Plug; 1/4" (Ea-D, De-01), Pipe Plug; 1/4" (Dh-01, Dh-02, Dn-03, Hc-D And Nb-D), Pipe Plug; (B: 24 Speed) 1/4", Pipe Plug; 1/4" (Engine Marked 3tne74c-Juv), Pipe Plug, Pipe Plug; 1/4", (Ha-D, Hb-D, Na-D), Pipe Plug; 6.35mm (1/4"), Pipe Plug; (B) 1/4", Pipe Plug; 1/4" (A), Pipe Plug; 1/4", (3020e), Pipe Plug; 1/4", (1 Used, Dual) (2 Used, Triple), Pipe Plug; 1/4", Pipe Plug; 1/4", (3020&), Pipe Plug; (A) (B) (C) 1/4", Pipe Plug; 1/4", Hex, Csk, Pipe Plug; 1/4", (3020l), Pipe Plug; 1/4", (Sub For Epc200683), Pipe Plug; 1/4", (Code 3300 And 3303), Pipe Plug; 1/4", (Use With R36902 Or R40632), Pipe Plug; 1/4" (Sub For Epc200683), Pipe Plug; 1/4" Sub Re168481, Pipe Plug; 1/4", Pipe Plug; 1/4" (24-Speed), Pipe Plug; Use Ty9374, Pipe Plug; 1/4", (Dual) (2 Used Triple), Pipe Plug; 1/4", (Na-D), Pipe Plug; (A: Less Rockshaft) 1/4", Pipe Plug; (Sub For Th111958), Pipe Plug; (A) 1/4", Pipe Plug; 1/4" 1/4" | 1 |
| AR***57 | Housing; (Marked R76533) | 1 |
| AR***27 | Seal, Seal | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37209 Inboard Planetary Final Drive (Oc-2)
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| R2***12 | Lock Plate, Lock Plate; 1" X 2", Hs Sae 8, Lock Plate | 1 |
| R3***03 | Needle Roller | 99 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37211 Inboard Planetary Final Drive (Oc-4)
| B***R | Snap Ring | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| R2***12 | Lock Plate, Lock Plate; 1" X 2", Hs Sae 8, Lock Plate | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37213,Re37191 Planetary And Axle
| AR***03 | Seal; (Sub Re31703), Seal | 1 |
| AR***27 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37214 Inboard Planetary Final Drive (Oc-7)
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| R2***12 | Lock Plate, Lock Plate; 1" X 2", Hs Sae 8, Lock Plate | 1 |
| R3***03 | Needle Roller | 99 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37232 Inboard Wet Disk Brakes (Dual, Oc-2)
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37238 Inboard Wet Disk Brakes
| R2***64 | Washer, Washer; Paper, Washer | 3 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 3 |
| R6***43 | Dowel Pin; (Not Required), Dowel Pin; (For R104672), Dowel Pin; (Sub For R33024), Dowel Pin, Dowel Pin; (Use With R77274 Or R104672), Dowel Pin; (B) (Sub For R33024), Dowel Pin | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37320 Input Yoke (Oc-6)
| R4***27 | Tube,10.5 mm Id X 25 mm Od X 69 mm L; - Support, Front, Compressor Mounting Bracket, Universal Joint Yoke | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37321 Input Yoke (Oc-7)
| R9***62 | Universal Joint Yoke; (Sub For R69985) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37322 Input Yoke
| R9***40 | Universal Joint Yoke | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37334 Spiral Bevel Input Pinion And Ring Gear Set (Oc-5)
| AR***32 | Gear; (Marked R41977 And R44383 ) (Also Order Re50114) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37335 Spiral Bevel Input Pinion And Ring Gear Set (Oc-5)
| AR***33 | Gear; (Marked R41978 And R44384 ) (Sub For Re11400 ) (Also Order Re50114) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37530 Differential Bearing Quills (Oc-5)
| 14***23 | Nut; 1/2", Sq., Nut; 1/2", Nut; 1/2", Square, Nut; 1/2", (Not Used This Application), Nut; 1/2" Square, Nut; 1/2" | 2 |
| JD***59 | Bearing Cone; (A), Bearing Cone; Lh, Bearing Cone; Rh (Ord (2) L28376, L29000, L29001, L29002, (16) L40557), Bearing Cone; L.H., Bearing Cone, Bearing Cone; (A), Bearing Cone; (Use With Ar101616), Bearing Cone; (B), Bearing Cone, Bearing Cone; Opp. Ring Gear Side, Bearing Cone; (B), Bearing Cone; Opp, Ring Gear Side | 1 |
| JD***59 | Bearing Cup; Ring Gear Side, Bearing Cup; Lh, Bearing Cup; (A), Bearing Cup, Bearing Cup; Rh, Bearing Cup; (Use With R126430), Bearing Cup; (B), Bearing Cup; (B), Bearing Cup, Bearing Cup; R.H., Bearing Cup; (Sub Re286515, This Application) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37530 Standard Differential (Oc-5)
| R1***39 | Cap Screw; 1/2" X 3-3/4", (Sub R44888), Cap Screw; (Sub For R44888), Cap Screw, Cap Screw, Cap Screw; 1/2" X 3-3/4", (Sub For R44888), Cap Screw; (Sub For R44888), Cap Screw; 12.700 X 95.250 mm (1/2" X 3-3/4") | 8 |
| R1***26 | Pinion; Sub For R68170, Pinion; (Sub For R68170), Pinion; (A: Quantity For One Axle), Pinion, Pinion | 4 |
| R5***94 | Washer; (Less Differential Lock), Washer; (C: Diff Lock), Washer; (A: Less Differential Lock), Washer; Tk=0,4mm (Sub For T16911), Washer; (A: Standard) (B: No-Spin), Washer; Aluminum, Washer; (A) (B), Washer; (No Differential Lock), Washer; (With Differential Lock), Washer; (W/O Differential Lock), Washer; (Sub For T16911), Washer; (Less Differential Lock), Washer; Differential Lock Holes, Washer; (A), Washer, Washer, Washer; Tk=0.4mm (Sub For T16911), Washer; 14.605 X 22.098 X 1.524 mm, (Differential Lock Holes), Washer; (B), Washer; (Tractors Less Differential Lock), Washer; Tk= 0.4mm | 4 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37535 Input Housing (Oc-6)
| 11***32 | Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218) | 1 |
| JD***40 | Bearing Cup; (Use With R72448), Bearing Cup, Bearing Cup | 1 |
| JD***64 | Bearing Cup, Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37698 Input Yoke (Oc-3)
| R1***00 | Seal; (B: Ar107921 - Input Yoke Parts), Seal; (Sub Re45315), Seal, Seal | 1 |
| R9***63 | Universal Joint Yoke; (Sub Re45316) | 1 |
| RE***15 | Seal Kit; (Sub For A42278), Seal Kit, Seal Kit, Seal Kit; (Use With R93529), Seal Kit; (B: Ar107921 - Input Yoke Parts) (Use With R93529), Seal Kit; (Use With R93134 Or R107600) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37699 Input Yoke (Oc-2)
| R1***00 | Seal; (B: Ar107921 - Input Yoke Parts), Seal; (Sub Re45315), Seal, Seal | 1 |
| R9***67 | Universal Joint Yoke; (Sub For Re45318) | 1 |
| RE***15 | Seal Kit; (Sub For A42278), Seal Kit, Seal Kit, Seal Kit; (Use With R93529), Seal Kit; (B: Ar107921 - Input Yoke Parts) (Use With R93529), Seal Kit; (Use With R93134 Or R107600) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re37998 Axle Housing And Shaft (Oc-4)
| AR***27 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***72 | Bearing Cup; (Inner), Bearing Cup, Bearing Cup; Inner, Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re38090 Input Housing
| 11***32 | Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218) | 1 |
| A4***0R | O-Ring; (Sub For Lvu23740), O-Ring; (Use With Re188948), O-Ring; (Sub An130937), O-Ring; (Use With R67064 Or R72672), O-Ring; (Use With Re34518), O-Ring; (Sub For U10289), O-Ring; 6 mm X 40 mm (7/32" X 1-1/2" I.D.), O-Ring; 1.475" X 0.210", O-Ring; (Use With Re34788 Or Re40363), O-Ring; (Use With Re191959 Or Re191960), O-Ring; (A: 8520 (02***33- )), O-Ring; (A), O-Ring; 37.465 X 5.334 mm (1.475" X 0.210"), O-Ring; 37.465 X 5.334 mm, O-Ring, O-Ring; (Use With Re191958), O-Ring; (Use With Re56329 Or Re56330 Or Re56537 Or Re56538), O-Ring; 6 mm X 40 mm (7/32" X 1-1/2") (I.D.), O-Ring, O-Ring; 5.60 mm X 40 mm (7/32" X 1-1/2") I.D., O-Ring; No Longer Used | 1 |
| AR***25 | Seal | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re38716 Differential Case To Quill Oil Lines (Oc-3)
| AR***56 | Fuel Line | 1 |
| AR***49 | Fitting, Fitting | 1 |
| AR***50 | Fitting, Fitting | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re39762 Oscillating Dual Pivot (Oc-3)
| 11***15 | Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07***67-07***71), 625 (07***49-07***52), 630 (07***01-07***15)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 08***62), 620 (41386 - 08***96 )) (B: On Series 622 (41386-07***66), 625 (41386-07***48), 630 (41386-07***00)) (C: On Series 622 (07***72-08***61), 625 (07***53-08***97), 630 (07***16-08***54)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (08***63- ), 620 (08***97- )) (B: Starting From Series Number 622 (08***62- ), 625 (08***98- ), 630 (08***55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619) | 1 |
| 14***94 | Nut; 1/2" | 1 |
| 3***1 | Bushing, Bushing | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re42798 Axle Housing And Shaft (Oc-5)
| AR***27 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***72 | Bearing Cup; (Inner), Bearing Cup, Bearing Cup; Inner, Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re42799, Re42800 Axle Housing And Shaft (Oc-3)
| AR***27 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| JD***72 | Bearing Cup; (Inner), Bearing Cup, Bearing Cup; Inner, Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re42848 Brakes (Oc-A)
| R2***64 | Washer, Washer; Paper, Washer | 6 |
| R4***40 | Piston, Piston, Piston; (Sub For R42411), Piston; (Sub For R26363 Or R42411) | 1 |
| R7***60 | O-Ring, O-Ring; (A: Quantity For One Axle), O-Ring; (Sub For R26863), O-Ring | 6 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Re43008 Input Yoke (Oc-B)
| R1***00 | Seal; (B: Ar107921 - Input Yoke Parts), Seal; (Sub Re45315), Seal, Seal | 1 |
| R1***27 | Universal Joint Yoke; (Sub For Re47571) | 1 |
| RE***15 | Seal Kit; (Sub For A42278), Seal Kit, Seal Kit, Seal Kit; (Use With R93529), Seal Kit; (B: Ar107921 - Input Yoke Parts) (Use With R93529), Seal Kit; (Use With R93134 Or R107600) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Spiral Bevel Input Pinion And Ring Gear Set
| YZ***67 | Washer | 1 |
| YZ***40 | Ring Gear And Pinion; (Marked R92799 And R92803 ) (Also Order Re50114 ) (Sub For Re32537) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Spiral Bevel Input Pinion And Ring Gear Set, Front, No Disconnect
| YZ***44 | Ring Gear And Pinion; (Marked R165482 And Yz120643 ) (Also Order Yz120167) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Spiral Bevel Input Pinion And Ring Gear Set, Rear
| YZ***42 | Bevel Gear; (Marked R165472 And Yz120641 ) (Also Order Re50114), Ring Gear And Pinion; R.H. Assembly, (Marked R56289 And Yz120641) (Sub Re165495) (Also Order Re50114) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1400 Axle : Spiral Bevel Set, Lh
| YZ***96 | Bevel Gear Drive; (Marked R92800 And R92804 ) (Also Order Re50114 ) (Sub For Re32538) | 1 |
| YZ***67 | Washer | 1 |
Axle Teammate I 1600 Axle
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Axle Housing And Shaft
| AR***12 | Seal | 1 |
| H8***36 | Elbow Fitting; 90°, Elbow Fitting | 1 |
| JD***27 | Bearing Cup; (Order Re293316), Bearing Cup, Bearing Cup; (Oredr Re293316), Bearing Cup, Bearing Cup; Order Re293316 | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37945,Re37946 Differential Case (Oc-1)
| AM***4T | Screw*#10-24uncx0.50 - Up To 97***89, Breather | 1 |
| F3***1R | O-Ring; (B: Without Lift Assist), O-Ring; (Oil Return Port), O-Ring, O-Ring; (No Longer Used), O-Ring; (C) (D) (Replacement Pump With Serial Plate), O-Ring; (D) (Use With R45227), O-Ring; (A), O-Ring; (Sub R56751 And Ar101237), O-Ring; (A: ( -Xxxxxx) 4755-00***22; 4955-00***73), O-Ring; (D), O-Ring, O-Ring; (For Ar39168), O-Ring; (A) (E), O-Ring; (Use With R124286 Or R124524), O-Ring; (Use With R71586), O-Ring; Kit Ar98993, O-Ring; 23.470 X 2.946 mm (Use With An210355), O-Ring; (Side And Rear), O-Ring; (Sub For U12547, This Application), O-Ring; (A: W/ Secondary Brake), O-Ring; (Use With R39172 Or R39316), O-Ring; (For Ar39167), O-Ring; (D: Not Required For 2350, 2355, 2550, 2555, 2750, 2755 Tractors With Dual Remote Cylinder Controls), O-Ring; (Use With R39317 Or R60969), O-Ring; (For R71586), O-Ring; 0.924" X 0.116", O-Ring; (Rear), O-Ring; (E: ( -Xxxxxx) Transmission Serial No. 4650-00***70; 4850-00***74), O-Ring; (Use With R58773), O-Ring; (B), O-Ring; (B: W/O Lift Assist), O-Ring; (Kit Ar63929), O-Ring; (A: Not Required For 2350, 2355, 2550, 2555, 2750, 2755 Tractors With Dual Remote Cylinder Controls), O-Ring; (For Eaton), O-Ring; (Use With R74447), O-Ring; 23.470 X 2.946 mm (0.924" X 0.116"), O-Ring; (Oil Cooler Return Line Hole In Block), O-Ring; (Replacement Pump With Serial Plate), O-Ring; Power Front Wheel Drive, O-Ring; (Use With Ak40544), O-Ring; Use With R58773, O-Ring; (C), O-Ring; (Used With Sundstrand), O-Ring; Replacement Pump With Serial Plate, O-Ring; (A) (Use With R71586), O-Ring; (D) (Elbow To Hydraulic Pump), O-Ring; (A: Trailer Brake), O-Ring; Rear, O-Ring; (Sub R56751 And Ar101237, This Application), O-Ring; 23.470 X 2.946 mm (0.924" X 0.116") (Use With An210355), O-Ring; (D) (Use With R71586), O-Ring; (Qrt), O-Ring; (C: ( -Xxxxxx) Tractor Serial No. 8760-00***18; 8960-00***60), O-Ring; (Used With Eaton), O-Ring; (G: ( -Xxxxxx) Transmission Serial No. 4050-00***34; 4250-00***52; 4450-00***19), O-Ring; (A) (Use With R45227), O-Ring; (Use With An210355), O-Ring; (C: Replacement Pump With Serial Plate), O-Ring; (A: Germany) (B: Used On 4050e And 4250e Only), O-Ring; 23.470 X 2.950 mm, O-Ring; (Power Front Wheel Drive), O-Ring; Dip In Oil, O-Ring; Rh, Rear, O-Ring; 1-1/16"-12, O-Ring; (A) (B), O-Ring; (2nd Scv), O-Ring; (A: Dual Scv), O-Ring; 90°, O-Ring; (A: Included In Ar63947), O-Ring; (C) (D) (Replacement Pump), O-Ring; 23.470 X 2.950 mm (0.924" X 0.116"), O-Ring; (Use With R45227), O-Ring; (B: Quad-Range Transmission) (Sub Ty22467), O-Ring; (Replacement Pump), O-Ring; (A) (Use With R49840), O-Ring; (A: Germany), O-Ring; (A: Lift Assist), O-Ring; (Used With Eaton Transmission) | 3 |
| R1***03 | Plug, Plug; (Sub For R54846) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37947 Input Housing (Oc-1)
| 11***85 | Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480" | 1 |
| 19***09 | Bolt, Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Ap40171 And Ap40172), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 M16x50 (10.9), Bolt; M16 X 50 (Hs, Sae 10.9), Bolt; (B: (Xxxxxx- ) 7610-00***79; 7710-00***83; 7810-00***66) M16 X 50 (Hs=10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu12701 And Lvu12702), Bolt; (A: Category Iii) M16 X 50, Bolt; M16 X 50 (Use With Re68963 Or Re68965), Bolt; (B: W/O Hitch) M16 X 50 Hs 10.9, Bolt; (A: 8520 (02***33- )) M16 X 50, Bolt; M16 X 50 (Hs=10.9), Bolt; M16 X 50 Hs 10.9, Bolt; (B: Category Iii) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 (10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Re275262 And Re275263), Bolt; (B: Category Iii) M16 X 50 (10, 9), Cap Screw; M16 X 50, (Sub For J921650) (Also Order 46***82), Bolt; M16 X 50 (Use With A59393 And A67052), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50, Bolt; M16 X 50, Cap Screw, Bolt; (B: Category Iii) M16 X 50 (10.9), Bolt; M16 X 50 (10.9), Bolt; M16 X 50, Hs 10.9, Bolt; M16 X 50 (Hs 10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu16367 And Lvu16368), Bolt; M16 X 50 (Use With Aa31281), Bolt; M16 X 50 Lh, Bolt; (A: Category Iii N) M16 X 50, Cap Screw; M16 X 50, (Sub For J901650), Cap Screw; M16 X 50, Bolt; (B: Tow-Behind) (D: Note; (71***06- ) Tow-Between (71***79- ) Tow-Behind) M16 X 50, Bolt; M16 X 50 (Sub For J901650), Bolt; M16 X 50 (Use With An220858), Bolt; M16x50, Bolt; M16 X 50 M16x50, Cap Screw; M16 X 50, (Sub For J921650), Bolt; M16 X 50 Tow-Behind, Bolt; M16 X 50 (Use Without Reversible Pads), Bolt; M16 X 50 M16x50 (10.9), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50, Bolt; M16 X 50 Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 (10.9), Bolt; (B: Less Hitch) M16 X 50 Hs=10.9, Bolt; (E: Serial Number For Model 5725 Is ( -00***59), For 5625 ( -Xxxxxx)) M16 X 50 (Use With Ap40171), Bolt; M16 X 50 (Sub For J921650), Bolt; M16 X 50 (Hs, Head Marked 10.9) Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Tow-Behind) (C: Note; ( -71***05) Tow-Between ( -71***78) Tow-Behind) M16 X 50, Bolt; (A: Setback Parallel Arms) M16 X 50, Bolt; M16 X 50 (Hs, Head Marked 10.9), Bolt; M16 X 50 Hs=10.9, Bolt; M16 X 50 (10.9) Cat Iii, Bolt; (B: 7210-02***07, 7410-02***97) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 M16x50 (10.9), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50 (Use With Aa31281) | 16 |
| 19***95 | Bolt; M16 X 55 (Use With Aa31281), Bolt; (B: (Xxxxxx-) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 55 (Use With Aa31281), Bolt; M16 X 55 Hs 10.9, Bolt; M16 X 55, Bolt; M16 X 55 (10.9), Bolt; M16 X 55 (Hs, Head Marked 10.9) (Use With Ap40171 And Ap40172), Bolt; M16x55, Bolt; M16 X 55 Hs=10.9, Cap Screw; M16 X 55, Bolt; M16 X 55 (Hs=10.9), Bolt; (A: No Power Take-Off Shield) M16 X 55, Bolt; M16 X 55 (Use With 43***45), Bolt, Bolt; M16 X 55 (Sub For 19m7480) | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37948 Input Housing (Oc-1)
| 11***85 | Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480" | 1 |
| 19***09 | Bolt, Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Ap40171 And Ap40172), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 M16x50 (10.9), Bolt; M16 X 50 (Hs, Sae 10.9), Bolt; (B: (Xxxxxx- ) 7610-00***79; 7710-00***83; 7810-00***66) M16 X 50 (Hs=10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu12701 And Lvu12702), Bolt; (A: Category Iii) M16 X 50, Bolt; M16 X 50 (Use With Re68963 Or Re68965), Bolt; (B: W/O Hitch) M16 X 50 Hs 10.9, Bolt; (A: 8520 (02***33- )) M16 X 50, Bolt; M16 X 50 (Hs=10.9), Bolt; M16 X 50 Hs 10.9, Bolt; (B: Category Iii) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 (10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Re275262 And Re275263), Bolt; (B: Category Iii) M16 X 50 (10, 9), Cap Screw; M16 X 50, (Sub For J921650) (Also Order 46***82), Bolt; M16 X 50 (Use With A59393 And A67052), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50, Bolt; M16 X 50, Cap Screw, Bolt; (B: Category Iii) M16 X 50 (10.9), Bolt; M16 X 50 (10.9), Bolt; M16 X 50, Hs 10.9, Bolt; M16 X 50 (Hs 10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu16367 And Lvu16368), Bolt; M16 X 50 (Use With Aa31281), Bolt; M16 X 50 Lh, Bolt; (A: Category Iii N) M16 X 50, Cap Screw; M16 X 50, (Sub For J901650), Cap Screw; M16 X 50, Bolt; (B: Tow-Behind) (D: Note; (71***06- ) Tow-Between (71***79- ) Tow-Behind) M16 X 50, Bolt; M16 X 50 (Sub For J901650), Bolt; M16 X 50 (Use With An220858), Bolt; M16x50, Bolt; M16 X 50 M16x50, Cap Screw; M16 X 50, (Sub For J921650), Bolt; M16 X 50 Tow-Behind, Bolt; M16 X 50 (Use Without Reversible Pads), Bolt; M16 X 50 M16x50 (10.9), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50, Bolt; M16 X 50 Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 (10.9), Bolt; (B: Less Hitch) M16 X 50 Hs=10.9, Bolt; (E: Serial Number For Model 5725 Is ( -00***59), For 5625 ( -Xxxxxx)) M16 X 50 (Use With Ap40171), Bolt; M16 X 50 (Sub For J921650), Bolt; M16 X 50 (Hs, Head Marked 10.9) Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Tow-Behind) (C: Note; ( -71***05) Tow-Between ( -71***78) Tow-Behind) M16 X 50, Bolt; (A: Setback Parallel Arms) M16 X 50, Bolt; M16 X 50 (Hs, Head Marked 10.9), Bolt; M16 X 50 Hs=10.9, Bolt; M16 X 50 (10.9) Cat Iii, Bolt; (B: 7210-02***07, 7410-02***97) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 M16x50 (10.9), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50 (Use With Aa31281) | 16 |
| 19***95 | Bolt; M16 X 55 (Use With Aa31281), Bolt; (B: (Xxxxxx-) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 55 (Use With Aa31281), Bolt; M16 X 55 Hs 10.9, Bolt; M16 X 55, Bolt; M16 X 55 (10.9), Bolt; M16 X 55 (Hs, Head Marked 10.9) (Use With Ap40171 And Ap40172), Bolt; M16x55, Bolt; M16 X 55 Hs=10.9, Cap Screw; M16 X 55, Bolt; M16 X 55 (Hs=10.9), Bolt; (A: No Power Take-Off Shield) M16 X 55, Bolt; M16 X 55 (Use With 43***45), Bolt, Bolt; M16 X 55 (Sub For 19m7480) | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37949 Spiral Bevel Input Pinion And Ring Gear Set (Oc-1)
| RE***51 | Bevel Gear; L.H. Assembly, (Marked R93164 And R93166) (Also Order Re50117), Bevel Gear; (Marked R93164 And R93166 ) (Also Order Re50117) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37950 Spiral Bevel Input Pinion And Ring Gear Set (Oc-1)
| RE***52 | Bevel Gear; (Marked R93165 And R93167 ) (Also Order Re50117), Bevel Gear; L.H. Assembly, (Marked R93165 And R93167) (Also Order Re50117) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37951 Input Yoke (Oc-1)
| R1***00 | Seal; (B: Ar107921 - Input Yoke Parts), Seal; (Sub Re45315), Seal, Seal | 1 |
| R9***71 | Universal Joint Yoke; 8c (Sub Re46797) | 1 |
| RE***15 | Seal Kit; (Sub For A42278), Seal Kit, Seal Kit, Seal Kit; (Use With R93529), Seal Kit; (B: Ar107921 - Input Yoke Parts) (Use With R93529), Seal Kit; (Use With R93134 Or R107600) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37952, Re37953 Axle Housing And Shaft (Oc-C)
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37954 Inboard Planetary Final Drive (Oc-3)
| 19***32 | Bolt; M16 X 130 (Hs=10.9) (Sub For M800598), Bolt; M16 X 130 Hs 10.9, Bolt; M16 X 130, Bolt; M16 X 130 (Hs, Head Marked 10.9), Bolt, Bolt; M16 X 130 Hs=10.9, Bolt; M16 X 130 M16 X 130, Bolt; M16 X 130 (Hs=10.9), Cap Screw; M16 X 130, (Sub For J901606), Cap Screw; (Sub For Ffsb108862), Cap Screw; M16 X 130, Cap Screw; M16 X 130, (Sub For Ffsb108862) | 14 |
| 19***43 | Bolt; M16 X 130, Bolt; M16 X 130 | 14 |
| R1***56 | Shim; (Sub For R63237, This Application), Shim | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37955,Re38251 Brake Plates And Facings (Oc-2 And Oc-3)
| R1***41 | Brake Disk; (Also Order Re46334 And (3) Re234308), Brake Disk; (Sub For R61712 Or R91826) (Also Order Re46334 And (3) Re234308), Brake Disk; (Sub R113741), Brake Disk; (A) (14 Teeth) (Sub For (2) R97801), Brake Disk; (Sub For (2) R97801), Brake Disk; (Sub For R97801), Brake Disk; (A: Use When R61711 Or R113733 Has Been Installed.) Z=14 (Sub For R97801), Brake Disk; (Sub For R61712, R91826 Or R97801) (Also Order Re46334 And (3) R46328), Brake Disk; (A) (14 Teeth) (Sub R113741), Brake Disk; (Sub For R61712, R91826 Or R97801) (Also Order Re46334 And (3) Re234308), Brake Disk; (Sub (2) R113741), Brake Disk | 1 |
| R4***73 | Washer, Washer; (Paper), Washer; (Use With R47100) | 3 |
| R4***74 | Piston, Piston; (Use With R47100) | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37955,Re38251 Dual And Independent Brake Hardware (Oc-2, Oc-3)
| 38***04 | Elbow Fitting; (D: (Xxxxxx-) 9100-01***18; 9200-01***41; 9300-01***60; 9400-01***51) (W/ Power Take-Off), Elbow Fitting; (A), Elbow Fitting; (B: Without Powered Rear Wheels), Elbow Fitting; (A: W/ Lateral Tilt) Incl Key 35, Elbow Fitting, Elbow Fitting; (Sub For Az39428), Elbow Fitting; (Sub For At135933, This Application), Elbow Fitting; (Bucket Section), Elbow Fitting; (Also Order T77613 And R26448), Elbow Fitting; (A: Dual), Elbow Fitting; (B: Non-Powered Rear Wheels), Elbow Fitting; 90°, One Per Unit, Elbow Fitting; One Per Unit, Elbow Fitting; (Use With Two And Three-Lever Controller), Elbow Fitting; (C: Without Chaff Spreader), Elbow Fitting; (Without Mechanical Front Wheel Drive), Elbow Fitting; (A: 9550 (69***01-) 9550sh (69***01-)), Elbow Fitting; 90', Elbow Fitting; (Sub For 38h1160) (Use With Kv24046), Elbow Fitting; (Use With Single Auxiliary Return Port), Elbow Fitting; (A: For 6650 From Ser.No. 50***94) (B: For 6750-6950 From Ser.No. 50***92), Elbow Fitting; (Ord 61h1004), Elbow Fitting; Left Port, Elbow Fitting; (S) Brake Port And Return At Reservoir, Elbow Fitting; (A: 9550 (-69***00) 9550sh (-69***00)), Elbow Fitting; 90 °, Elbow Fitting; (Sub For 61h1004), Elbow Fitting; Without Powered Rear Wheels, Elbow Fitting; (A: For Row Trak Only), Elbow Fitting; (A: 8520 (02***33-)), Elbow Fitting; (A: (-Xxxxxx) 8560-00***00; 8760-00***00; 8960-00***00), Elbow Fitting; (Right Bottom Port, First From Right), Elbow Fitting; (B), Elbow Fitting; (Use With Afh10265), Elbow Fitting, Elbow Fitting; (A: Differential Lock), Elbow Fitting; (W/O Power Take-Off), Elbow Fitting; (A: For 6650 From Ser.No. 50***95) (B: For 6750-6950 From Ser.No. 50***93), Elbow Fitting; (Sub For 38h1435, This Application), Elbow Fitting; (Brake Port And Return At Reservoir), Elbow Fitting; (Head End) (Use With At114474), Elbow Fitting; (A: For Multicrop Machines), Elbow Fitting; 90, Elbow Fitting; 90°, Elbow Fitting; (Use With Three Lever Auxiliary Return Port And Pilot Shut-Off Valve Outlet Port), Elbow Fitting; (With Mechanical Front Wheel Drive) | 2 |
| 38***60 | Adapter; 9/16"-18unf X 11/16"-16un, (Use With R126374), Adapter Fitting; (Front Ports, First, Third And Fifth From Right), Adapter; (A: Differential Lock), Adapter; (Use With Kv21179), Adapter; (A: For Commandcenter), Adapter Fitting; (Use With Front Diff Lock), Adapter Fitting; (Pilot And Inlet Port), Adapter; Straight, Adapter; (B: (Xxxxxx-) 8100-00***23; 8200-00***91; 8300-00***15; 8400-00***84), Adapter Fitting; (Use With Two And Three-Lever Bucket Workports), Adapter; (A: (-Xxxxxx) 8560-00***00; 8760-00***00; 8960-00***00), Adapter Fitting; (K1), Adapter; 9/16"-18unf X 11/16"-16un, Adapter; (A: For 9650 (-69***00) & 9750 (-69***00)), Adapter; (C: Note; 9550 (-70***00) 9550sh (-70***00)), Adapter; Powered Rear Wheels Only, Adapter; 9/16-18x6, Adapter; (B: Without Powered Rear Wheels), Adapter; (A: W/ Twine System), Adapter Fitting; (Four-Spool Valve), Adapter Fitting; (Without Auxiliary), Adapter Fitting; (Three-Spool Valve), Adapter; Straight One Per Unit, Adapter; (A: (-Xxxxxx) 9100-01***17; 9200-01***40; 9300-01***59; 9400-01***50), Adapter Fitting; (Two-Spool Valve), Adapter; 9/16 - 18 Oring X 6, Adapter Fitting; (Bucket Section) (Inlet Section), Adapter; (A: W/ Power Take-Off), Adapter Fitting; (Boom Section Pilot Caps), Adapter; (B: For Automatic Header Control (Ahc)) (C: For Hillmaster), Adapter; (A: Dual), Adapter; (A: Outlet), Adapter; (A: 9550 (-69***00) 9550sh (-69***00)), Adapter; (Sub For At326353), Adapter Fitting; (Bucket And Auxiliary Sections) (Inlet Sec), Adapter; R.H., Adapter; Use With Powered Rear Wheels Only, Adapter Fitting; (Fitting), Adapter Fitting; (Bucket And Auxiliary Section)(Inlet Section), Adapter Fitting; (Bucket And Auxiliary Section)(Inlet Sec), Adapter Fitting; (Bucket And Auxiliary Section), Adapter, Adapter; (Sub For 38h1309, This Application), Adapter; (B: For Automatic Header Control (Ahc)), Adapter; (Rod End) (Use With At114474), Adapter Fitting, Adapter; (A: 9550 (69***01-) 9550sh (69***01-)), Adapter Fitting; (Use With Single Lever Controller), Adapter Fitting; (With Auxiliary), Adapter; Straight, One Per Unit, Adapter; (Also Order T77613 And R26448), Adapter; 1/4"-St, Adapter; 9/16"-18 Unf X 11/16"-16 Un, Adapter; (A: For 6650 From Ser.No. 50***94) (B: For 6750-6950 From Ser.No. 50***92), Adapter; (A: Standard Cylinder Only) (Use With Ah162514), Adapter Fitting; (Pilot Port), Adapter; (A: For Rigid Feeder House), Adapter; (B: Independent), Adapter; (A: (-Xxxxxx) 8100-00***22; 8200-00***90; 8300-00***14; 8400-00***83), Adapter; Order 61h1160, Adapter Fitting; (Pilot Port And Inlet Port), Adapter; (A), Adapter; (Ord 61h1160), Adapter; (C: For Reel Lift / Lower Orifice Kit), Adapter; (Sub For 38h1161), Adapter; 9/16" O-Ring X 11/16" O-Ring Face Seal, Adapter; (A: For Reel Lift / Lower Orifice Kit) | 2 |
| R2***12 | Bleed Valve; (B: 5415 Sn 00***78-Xxxxxx , 5715 Sn 00***46-Xxxxxx), Bleed Valve; (A: 5415 Sn Xxxxxx- , 5715 Sn Xxxxxx-), Bleed Valve; (B: 5415 Sn 00***78-Xxxxxx , 5615 Sn 00***51-Xxxxxx , 5715 Sn 00***46-Xxxxxx), Bleed Valve; (B: 5415 Sn -00***77, 5615 Sn -00***50, 5715 Sn -00***45), Bleed Valve; W/O L36237, Bleed Valve; (A: 8520 (02***33- )), Bleed Valve; Bleed, Bleed Valve; (A), Bleed Valve, Bleed Valve, Bleed Valve; (B: 5415 Sn -00***77, 5715 Sn -00***45), Bleed Valve; Incld In 3, Bleed Valve; 3/8", Bleed Valve; (A: 5415 Sn Xxxxxx- , 5615 Sn Xxxxxx- , 5715 Sn Xxxxxx-), Bleed Valve; (Sub For W15277 And N371112), Bleed Valve; (W/O L36237), Bleed Valve; 3/8" (Sub For Al38310), Bleed Valve; (W/O L36237) | | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37956, Re38312 Standard Differential (Oc-1 )
| 19***18 | Cap Screw; 5/8" X 1-3/8" | 12 |
| R1***89 | Bevel Gear; (Sub R134733), Bevel Gear; (C: Axle Serial No.), Bevel Gear, Bevel Gear | 2 |
| R1***84 | Cap Screw; (Sub For R43369 ) (Sub R121199), Cap Screw; (Sub For R43369), Cap Screw, Cap Screw; (Sub For R42407 Or R43369), Cap Screw; (B) (Sub For R79850, R42407 Or R43369, This Application), Cap Screw; (Sub For R42407) (Sub For R43369), Cap Screw; 1/2" X 2", (Sub For R43369) (Sub R121199, This Application), Cap Screw; 12.700 X 50.800 mm, Cap Screw; 12.700 X 50.800 mm (1/2" X 2"), Cap Screw; (Sub For T24326, R42407 Or R43369) | 12 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37957 Differential Lock (Oc-3)
| 14***04 | Nut; 3/4" 19.050 mm 3/4 Unf-2b Zn, Nut; 19.050 mm (3/4") (Sub For Na3557), Nut, Nut; 3/4" (Sub 14h902, This Application And 11h237), Nut; 3/4" (Without Hydraulic Wing Control), Nut; 3/4", (Sub For Na3557), Nut; 3/4", For 12n, Nut; 3/4", For Independent Marker, Nut; 3/4", Unf, Jam, Nut; 3/4", Jam, Nut; 3/4", Automatic Marker, Nut; 3/4", Independent Marker, Nut; 3/4", Nut; 3/4" (B), Nut; 3/4", For Automatic Marker, Nut; (A) 3/4", Nut; (A: Without Hydraulic Wing Control) 3/4", Nut; 3/4", Unf, Nut; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 3/4", Nut; 3/4" 3/4 Unf-2b Zn, Nut; 3/4" 3/4", Nut; 3/4", Unf,Jam, Nut; (B: Note; (Tbh Illustrated) (Tbt) -71***05 (Tbh) -71***78) 3/4", Nut; 3/4", For 6w, 8n, 8w, Nut; 3/4", Jam. Unf., Nut; 3/4" Jam, Nut; (B) 3/4", Nut; Without Hydraulic Wing Control, Nut; (A: Note; (Tbt) 71***06- (Tbh) 71***79-) 3/4", Nut; (B) 3/4", Nut; 304", Nut; 3/4" Without Hydraulic Wing Control | 2 |
| 19***18 | Cap Screw; 5/8" X 1-3/8" | 12 |
| 24***39 | Washer; (A: Use With Conversion From Niehoff To Motorola Alternator For 8450 Prior To Serial No. 00***86) 11/16" X 1-1/4" X 0.105", Washer, Washer; 11/16" X 1-1/4" X 0.105", (No Longer Required), Washer; .105" X 11/16" X 1-1/4", Washer; 11/16" X 1-1/4" X 0.105" (B), Washer; 11/16" X 1-1/4" X 0.105", (Sub For C1246r, This Application), Washer; 11/16" X 1-1/4" X 0.105" Rh, Washer; 11/16" X 1-1/4" X 0.105", 1 Per Wheel With More Than One Weight, Washer; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 11/16" X 1-1/4" X 0.105", Washer; 21/32"X1-1/4"X.120", Washer; 11/16" X 1-1/4" X .105", Washer; (C) 11/16" X 1-1/4" X 0.105", Washer; 17.475 X 31.750 X 2.667 mm (11/16" X 1-1/4" X 0.105"), Washer; 11/16" X 1-1/4" X 0.105" (C), Washer; (A: Not Used In U.S. And Canada) 11/16" X 1-1/4" X 0.105", Washer; 11/16" X 1-1/4" X 0.105", Washer; (B) 11/16" X 1-1/4" X 0.105", Washer; 11/16" X 1-1/4" X 0.105" 1 Per Wheel With More Than One Weight, Washer; (A: For 9650 (70***01- ) & 9750 (70***01- )) 11/16" X 1-1/4" X 0.105", Washer; (A: For 9650 ( -70***00) & 9750 ( -70***00)) 11/16" X 1-1/4" X 0.105", Washer; (A) 11/16" X 1-1/4" X 0.105", Washer; X 11/16" X 1-1/4" X .105", Washer; 11/16" X 1-1/4" X 0.105", Used With Strap N240536 Only, Washer; 11/16" X 1-1/4" X 0.105", (714, 716), Washer; 11/16" X 1-1/4" X 0.105", (Sub For M42114), Washer; 11/16" X 1-1/4" X 0.105", (4, 8, 12, 16 Or 20 Quik-Tatch Weights), Washer; 11/16"X1-1/4"X.105", Washer; (B) 11/16" X 1-1/4" X 0.105" | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37958,Re38313 Standard Differential (Oc-2)
| 19***18 | Cap Screw; 5/8" X 1-3/8" | 12 |
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 2 |
| R1***84 | Cap Screw; (Sub For R43369 ) (Sub R121199), Cap Screw; (Sub For R43369), Cap Screw, Cap Screw; (Sub For R42407 Or R43369), Cap Screw; (B) (Sub For R79850, R42407 Or R43369, This Application), Cap Screw; (Sub For R42407) (Sub For R43369), Cap Screw; 1/2" X 2", (Sub For R43369) (Sub R121199, This Application), Cap Screw; 12.700 X 50.800 mm, Cap Screw; 12.700 X 50.800 mm (1/2" X 2"), Cap Screw; (Sub For T24326, R42407 Or R43369) | 12 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re37959 Oscillating Differential Support (Oc-2)
| AR***29 | Seal, Seal | 1 |
| AR***30 | Seal, Seal | 1 |
| JD***59 | Lubrication Fitting; (A: 9550 ( -70***61) 9550sh ( -70***00)), Lubrication Fitting; Rockwell, Lubrication Fitting; (Sub Hk031090), Lubrication Fitting; Lh, Lubrication Fitting; (Sub For Jd7842, This Application), Lubrication Fitting; (Sub For 15h253), Lubrication Fitting; (Sub F66200) (Not Shown), Lubrication Fitting; (A), Lubrication Fitting; 1/8", (Sub For Jd7798), Lubrication Fitting; (A: Rockwell) 1/8", Lubrication Fitting; (C) 1/8" Straight, Lubrication Fitting; Self-Tapping, Lubrication Fitting; (A) 1/8" Straight, Lubrication Fitting; (B) 1/8" Straight, Lubrication Fitting; (A: For 9650 ( -70***64) & 9750 ( -70***79)), Lubrication Fitting; (Use With R62261), Lubrication Fitting; Straight, Rear Bearing Only, Lubrication Fitting; (Sub For B11182), Lubrication Fitting; (A: 9550 (70***62- ) 9550sh (70***01- )), Lubrication Fitting; 1/8", Grease, Lubrication Fitting; 1/8", (Barrel), Lubrication Fitting; (Sub For 0370005335), Lubrication Fitting; 1/8" (Sub For 15h638 Appl), Lubrication Fitting; 1/4", (Sub For Jd7798), Lubrication Fitting; (Sub For At252686), Lubrication Fitting; (B: Use With Rear Bearing), Lubrication Fitting; (A: For 9650 (69***96- ) & 9750 (69***23- )), Lubrication Fitting; (Sub For Jd7798), Lubrication Fitting; (Sub For Jd7798, This Application), Lubrication Fitting; Grease, Straight, 1/8", Lubrication Fitting; 1/8 St, Lubrication Fitting; (For Cylinder Rod With Square Bushing), Lubrication Fitting; 1/8", (Sub For Mg80710), Lubrication Fitting; Straight (B), Lubrication Fitting; (B) (C), Lubrication Fitting; 1/8", (714a, 716a), Lubrication Fitting; 1/8", Straight, Lubrication Fitting; 1/8-27 (Straight), Lubrication Fitting; (Plain Bearing), Lubrication Fitting; (A) 1/8", Lubrication Fitting; (Sub For Jd7759), Lubrication Fitting; (B: For Cylinder Rod With Square Bushing), Lubrication Fitting; (A: For 9650 ( -69***95) & 9750 ( -69***22)), Lubrication Fitting; (D), Lubrication Fitting; (Sub For Jd7848) Rice, Lubrication Fitting; Straight, 1/8" (Special), Lubrication Fitting; (D: 8520 (02***33- )), Lubrication Fitting; 1/8", Straight, Grease, Lubrication Fitting; (A: For 9650 (70***65- ) & 9750 (70***80- )), Lubrication Fitting; (A) (B) 1/8" Straight, Lubrication Fitting; (B: 5415 Sn -00***77, 5615 Sn -00***50, 5715 Sn -00***45), Lubrication Fitting; (Use With Ar95972), Lubrication Fitting; Rear Bearing Only, Lubrication Fitting; 1/4", Lubrication Fitting; (Front Axle To Frame), Lubrication Fitting; Incld In 3, Lubrication Fitting; 3.18mm (1/8"), Lubrication Fitting; Straight, Lubrication Fitting; (F) (Plain Bearing), Lubrication Fitting; (3mm), Lubrication Fitting; (Sub F66200), Lubrication Fitting; (Sub For Th100364), Lubrication Fitting; 1/8" (Sub For Jd7798), Lubrication Fitting; Straight 1/8", Lubrication Fitting; (Use With At73775), Lubrication Fitting; (C) (D), Lubrication Fitting; ,1/8" Straight, Lubrication Fitting; (Lift Cylinder), Lubrication Fitting; 1/8 X 27 (Straight), Lubrication Fitting; C, Lubrication Fitting; Incld In 2,5, Lubrication Fitting; (B: Use With Rear Bearing) Straight, Lubrication Fitting; A, Lubrication Fitting; (Use With R70589), Lubrication Fitting; 1/8" (Use With R62261), Lubrication Fitting; Grease Straight, 1/8", Lubrication Fitting; 1/8"-Npt, Lubrication Fitting; L H, Lubrication Fitting; L.H., Lubrication Fitting; 1/8 Pipe, Lubrication Fitting; Straight (For Rear Bearing Only), Lubrication Fitting; (Sub For Jd7842, This Appl), Lubrication Fitting; 1/8", Grease, Straight, Lubrication Fitting; 1/8" (Rod), Lubrication Fitting; 1/8", Lubrication Fitting; 1/8" - Straight, Lubrication Fitting; 1/4" Straight, Lubrication Fitting; (Sub For Jd7798) 1/8" Straight, Lubrication Fitting; 1/8" (Sub For 15h253), Lubrication Fitting; Incld In 15, Lubrication Fitting; Incld In 26, Lubrication Fitting; 1/8", Straight, (Sub For Mg80710), Lubrication Fitting; 1/8" Straight, Lubrication Fitting; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Lubrication Fitting; Male, Lubrication Fitting; (Sub For Jd7847, This Application), Lubrication Fitting; Fitting, Grease, Straight, 1/8, Lubrication Fitting; (B: 5415 Sn -00***77, 5715 Sn -00***45), Lubrication Fitting; Rh, Lubrication Fitting; 1/8" (Use With Ar95972), Lubrication Fitting; 1/8" (300), Lubrication Fitting; (Sub For Jd7798 Appl), Lubrication Fitting; (As Required), Lubrication Fitting; (B), Lubrication Fitting; (Use With Re273958), Lubrication Fitting; (Sub For F66200), Lubrication Fitting; (Rear Bearing Only), Lubrication Fitting; Incld In 7, 8, Lubrication Fitting; (B: 5415 Sn 00***78-Xxxxxx , 5615 Sn 00***51-Xxxxxx , 5715 Sn 00***46-Xxxxxx), Lubrication Fitting; Incld In 1, Lubrication Fitting; (A), (B), Lubrication Fitting; 1/8-In., Lubrication Fitting; (Sub Jd7798), Lubrication Fitting; (Metric), Lubrication Fitting; Straight, 1/4", Lubrication Fitting, Lubrication Fitting; (3.18mm), Lubrication Fitting; Straight, 1/8", Lubrication Fitting; 1/8 In. Straight, Lubrication Fitting; (210), Lubrication Fitting; (For Rear Bearing Only), Lubrication Fitting; (Sub For Jd7798) (Use With B14880) 1/8" Straight, Lubrication Fitting; (A: Incld In Cb11479899 Linkage), Lubrication Fitting; (B: 5415 Sn 00***78-Xxxxxx , 5715 Sn 00***46-Xxxxxx), Lubrication Fitting; (Use With Re37749), Lubrication Fitting; 1/8 In Straight, Lubrication Fitting; (A) (B) Straight, 1/8", Lubrication Fitting, Lubrication Fitting; (310), Lubrication Fitting; M8, Lubrication Fitting; (C: ( -Xxxxxx) 4755-01***20; 4955-01***12) | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38214 Spiral Bevel Input Pinion And Ring Gear Set (Oc-2)
| RE***29 | Bevel Gear; (Marked R71692 And R97231 ) (Also Order Re50117) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38215 Spiral Bevel Input Pinion And Ring Gear Set (Oc-2)
| RE***30 | Bevel Gear; (Marked R97232 And R97242 ) (Also Order Re50117 ) (Sub For Re36454) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38216 Spiral Bevel Input Pinion And Ring Gear Set (Oc-3)
| RE***31 | Gear; (Marked R97233 And R97243 ) (Also Order Re50117) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38217 Spiral Bevel Input Pinion And Ring Gear Set (Oc-3)
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38218 Spiral Bevel Input Pinion And Ring Gear Set (Oc-4)
| RE***33 | Gear; (Marked R97235 And R97244 ) (Also Order Re50117) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38219 Spiral Bevel Input Pinion And Ring Gear Set (Oc-4)
| RE***34 | Gear; (Marked R70691 And R97236 ) (Also Order Re50117) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38220 Spiral Bevel (Oc-A)
| RE***63 | Bevel Gear; (A: Also Order R58255, R58256, R58257, R58258, R81362, R81363 And R81364) Rear, (Marked R98048 And R98049), Bevel Gear; (A: Also Order R58255, R58256, R58257, R58258, R81362, R81363 And R81364) Front, (Marked R98048 And R98049), Bevel Gear; (Marked R98048 And R98049 ) (Also Order Re50116) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38221 Spiral Bevel (Oc-B)
| RE***62 | Bevel Gear; (Marked R98046 And R98047 ) (Also Order Re50116), Bevel Gear; (A: Also Order R58255, R58256, R58257, R58258, R81362, R81363 And R81364) Front, (Marked R98046 And R98047), Bevel Gear; (A: Also Order R58255, R58256, R58257, R58258, R81362, R81363 And R81364) Rear, (Marked R98046 And R98047) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38222 Spiral Bevel (Oc-B)
| RE***96 | Gear; (B: Also Order R58255, R58256, R58257, R58258, R84606, R84607 And R84608) Front, (Marked R83635 And R98318), Gear; (B: Also Order R58255, R58256, R58257, R58258, R84606, R84607 And R84608) Rear, (Marked R83635 And R98318), Gear; (Marked R83635 And R98318 ) (Also Order Re50116) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38223 Spiral Bevel (Oc-B)
| RE***95 | Gear; (B: Also Order R58255, R58256, R58257, R58258, R84606, R84607 And R84608) Rear, (Marked R83633 And R98316), Gear; (B: Also Order R58255, R58256, R58257, R58258, R84606, R84607 And R84608) Front, (Marked R83633 And R98316), Gear; (Marked R83633 And R98316 ) (Also Order Re50116) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38242 Axle Housing And Shaft (Oc-A)
| AR***27 | Seal, Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| H8***36 | Elbow Fitting; 90°, Elbow Fitting | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38243 Axle Housing And Shaft(Oc-B)
| AR***12 | Seal | 1 |
| F2***0R | Shim; Tk= 1.5mm, Shim, Shim; 1.031" X 2.063" X 0.060", Shim; 26.200 X 52.400 X 1.524 mm, Shim; Tk = 1.5 mm, Shim; Tk=1.52 mm (.060"), Shim; 1.52mm (.060"), Washer, Shim; 26.200 X 52.400 X 1.524 mm Model 8w, 10w, 10n And 12n, Shim; 1.52 mm (.060") | 1 |
| H8***36 | Elbow Fitting; 90°, Elbow Fitting | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38253, Re38254,Re63425 Brake Plates And Facings
| A4***8R | O-Ring; (Use With R48952 Or R49345), O-Ring, O-Ring; (A) (B), O-Ring; (2 Used With L29014), O-Ring; (1 Used With R48952) (2 Used With R49345), O-Ring; (Sub For Ty7040), O-Ring; (Use With R47100), O-Ring; (3"X8"), O-Ring; (B), O-Ring; (Use With R49345), O-Ring, O-Ring; Rubber, O-Ring; (A) | 3 |
| R1***96 | Brake Disk; (C: Use With Re63425), Brake Disk; (B: (Xxxxxx- ) 8870-00***13; 8970-00***69) | 1 |
| R4***73 | Washer, Washer; (Paper), Washer; (Use With R47100) | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38253,Re38254 Brakes (Oc-B) (Oc-C)
| 38***09 | Elbow Fitting; (Use With Ah216525), Elbow Fitting; 90°, Elbow Fitting; 90° O-Ring Fsf, (A), Elbow Fitting, Elbow Fitting; Standard Capacity, Elbow Fitting; (A) 90° O-Ring Fsf, Elbow Fitting, Elbow Fitting; (W/O Mechanical Front Wheel Drive), Elbow Fitting; (Use With Ah216525 Cylinder), Elbow Fitting; (Sub For At326351), Elbow Fitting; (Without Mechanical Front Wheel Drive), Elbow Fitting; (Also Order T77613 And R26448), Elbow Fitting; (Head End) (Use With At100471) | 1 |
| 38***25 | Tee Fitting | 1 |
| R2***48 | Ball; (Use W/ Re12411), Ball; (Kit Ar63929), Ball; (B: For Hillmaster Ii), Ball; 11.887 X 1.981 mm, Incld In 9,11,12,13, Ball; (2-Manual Lift Reel; 1-Hydraulic Lift Reel), Ball; (C) 11.887 X 1.981 mm, Ball; (Ord Al70120), Ball; (A: Universal Kit - Applications Will Vary), Ball; (A: With Selectable Power Take-Off (540/540e/100)), Ball; (A: For 9650 (-69***00) & 9750 (-69***00)), Ball; (A: W/O Eov Sump Valve), Ball; (B: For 4040, 4240, 4440, 4450 And 4455 Tractors.), Ball; (Sub For E40794), Ball; (B: Rockshaft), Ball; (A: Dual), Ball; (Dual), Ball; 6 Sae, Ball; (W/ Hydraulic Wing Control), Ball; 11.887 X 1.981 mm Incld In 2, 4, 15, Ball; (K1) (K2) (K3), Ball; 11.887 X 1.981 mm, Incld In 11,13, Ball; (B) Rear Drain, Ball; (A: Incld In R27218 Plug, R27212 0070028756 Fitting, Aw22821 Elbow Fitting, 0071341084 Tee Fitting) 11.887 X 1.981 mm, Ball; (B: (Xxxxxx-) 8560-00***01; 8760-00***01; 8960-00***01), Ball; 11.887 X 1.981 mm Incld In 33, 38, 40, Ball; (A: For 6650 From Ser.No. 50***95) (B: For 6750-6950 From Ser.No. 50***93), Ball; (B: Incl In 0070028756 & R27212 Fittings, Cb01432818 Tee Fitting, Cb01460313 Press Switch) 11.887 X 1.981 mm, Ball; (A: Universal Kit - Applications Will Vary) (Load Sense) (Nlr), Ball; (B: Serialized Pump), Ball; 11.887 X 1.981 mm, Incld In 24, Ball; 11.887 X 1.981 mm, Incld In 1,4,9,16, Ball; (Kit Az24156), Ball; (For Ar63911), Ball; 11.887 X 1.981 mm, Incld In 15, Ball; (Use With R100514), O-Ring; Anti-Cavity, Ball; (A: Trailer Brake), Ball; 11.887 X 1.981 mm, Incld In 9,13, Ball; (D: Incld In 0071341813 & 0070031627 Fittings) 11.887 X 1.981 mm, Ball; 11.887 X 1.981 mm, Ball; (A) (Sub For E40794), Ball; 11.887 X 1.981 mm, Incld In 19,21,24,26, O-Ring; Brake Light Switch, Ball; 11.887 X 1.981 mm Incld In 6, 7, 8, Ball; (A: Use With Replacement Steering Valve), Ball; (B: With Hydraulic Wing Control), Ball; (B) 11.887 X 1.981 mm (0.468" X 5/64"), Ball; 11.887 X 1.981 mm Incld In 1, Ball; (B), Ball; 11.887 X 1.981 mm, Incld In 27, Ball; 11.887 X 1.981 mm, Incld In 16, Ball; (Triple), Ball; Incld In 8, Ball; (Use W/ Re12411 Or M132725), Ball; (C: W/O Eov Sump Valve) (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (Use With Ar26725), Ball; 11.887 X 1.981 mm Incld In 2, 3, 11, 40, 41, 42, Ball; (B: Incl In 0070028756 & R27212 Fittings, Cb01432815 Tee Fitting, Cb01460313 Pressure Switch), Ball; (2 Used, Manual Lift Reel; 1 Used, Hydraulic Lift Reel), Ball; (Kit Ah127848), Ball; (Kit Ah113426 And Ah113427), Ball; (Use With Afh10265), Ball; (Use With Re11884), Ball; (Use With Re70979), Ball; (A: Note; 9550 (70***01-)9550sh (70***01-)), Ball; (B: Incl In 0070028756 & R27212 Fitting, Cb01432616 Tee Fitting, Cb01460313 Press Switch), Ball; (Sub Ty22470), Ball; (Used On 2-Unit), Ball; (Use With At342788), Ball; (6504), Ball; (Use With Re45965), Ball; (Less Hitch), Ball; (2 Used-Manual Lift Reel; 1 Used-Hydraulic Lift Reel), Ball; (B: Incl In 0070028756 & R27212 Fitting, Cb01432616 Tee Fitting, Cb01460313 Press Switch) 11.887 X 1.981 mm, Ball; (E: Incl In R27212 Fitting) 11.887 X 1.981 mm, Ball; With Hydraulic Wing Control, Ball; (Use Without Manual Destroke), Ball; Kit Ae38021, Ball; 11.887 X 1.981 mm, Incld In 28, Ball; (A: European Version) (C: (-Xxxxxx) 4755-00***00; 4955-00***30), Ball; (Inlet And Outlet) (8650, 5820) (Sub For R78079, Appl), Ball; (Kit Ah127846), Ball; (A: Mechanical Front Wheel Drive), Ball; (A: 8520 (02***33-)), Ball; (Sub For R78079, This Application), Ball; (E: Incld In R27212 Fitting) 11.887 X 1.981 mm, O-Ring, Ball; (Use With Ar63911, Ar67095), Ball; Less Hitch, Ball; (B: Also Includes Sn:), Ball; (-6 Sae), Ball; Incld In 2,3,5,11,15, O-Ring; (K2), Ball; (Use With R45010), Ball; (6505), Ball; (Use With At68978), Ball; (3rd Scv), O-Ring; Pilot End Cap Ports, Ball; (B: Incl In 0070028756 & R27212 Fittings, Cb01432818 Tee Fitting, Cb01460313 Press Switch), O-Ring; (With No Auxiliary. Functions), Ball; (B: Incld In R27212 Fitting) 11.887 X 1.981 mm, Ball; (Inlet And Outlet) (8650, 5820) (Sub For R78079, This Application), Ball; (A: Not Used In Us And Canada), Ball; (Sub For Gg335-27959), Ball; (Sub For R28782, This Application), O-Ring; (With Auxiliary), Ball; (K), Ball; Use W/ Re12411, Ball; (A: 9550 (69***01-) 9550sh (69***01-)), Ball; (A: 1 Used Triple, 2 Used Quad), Ball; (Less Power Take-Off), Ball; 11.887 X 1.981 mm, Incld In 15,17, Ball; (D: (Xxxxxx-) 8560-00***01; 8760-00***01; 8960-00***01), Ball; (K: Kit At107508), Ball; (C: For Reel Lift / Lower Orifice Kit), Ball; (A: Germany), O-Ring; 11.887 X 1.981 mm, Ball; (A: Front), Ball; (B: Ar107921 - Input Yoke Parts), Ball; 9000 Series Tractors, Ball; Front, Ball; (A: W/O Eov Sump Valve) (C: (Xxxxxx-) 4560-00***21; 4760-00***79; 4960-00***06), Ball; 11.887 X 1.981 mm, Incld In 2,3,5,15,23, Ball; (Sub For Z22677), Ball; (Use With R77712), Ball; 11.887 X 1.981 mm (0.468" X 5/64"), Ball; (B: For Automatic Header Control (Ahc)) (C: For Hillmaster), Ball; (G: Incld In At49216 Plug) 11.887 X 1.981 mm, Ball; Incld In 3, Ball; Rh, Ball; 11.887 X 1.981 mm, Incld In 7, Ball; (A: For 9650 (69***01-) & 9750 (69***01-)) 11.887 X 1.981 mm, Ball; 11.887 X 1.981 mm, Incld In 9, Ball; (A: 9550 (-69***00) 9550sh (-69***00)), Ball; 11.887 X 1.981 mm, Incld In 4, Ball; 11.887 X 1.981 mm, Incld In 4,12,13,22,43,54, Ball; 11.89 X 1.98 mm, Ball; (A) 11.887 X 1.981 mm (0.468" X 5/64"), Ball; 11.887 X 1.981 mm, Incld In 4,13,15, Ball; (A: Incl In An193888 Adapter Fitting, 0070028756 & 0070006612 Fittings, Aw22821 Elbow Fitting) 11.887 X 1.981 mm, Ball; (A) (B) (K1), Ball; (A: 1 Used 3rd, 2 Used 4th), Ball; (Sub For R78079, Appl), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B: For Automatic Header Control (Ahc)), Ball; (D), Ball; 11.887 X 1.981 mm, Incld In 5, Ball; (A: For 9650 (-70***00) & 9750 (-70***00)), Ball; 9/16", Ball; (B: Incld In 0070028756 & 0070006612 Fittings, Aw22821 Elbow Fitting) 11.887 X 1.981 mm, Ball; (Use With Ar28997 Or At36465), Ball; (B: Triple Scv), Ball; 11.89 X 1.98 mm, (Use With R126374), Ball; (C: Include In 0070028756 And 0071341605 Fittings) 11.887 X 1.981 mm, Ball; 11.887 X 1.981 mm (0.468" X 5/64") (Use With Aa31975), Ball; (Use With 38h1009), Ball; 11.887 X 1.981 mm, Incld In 30, Ball; (No Longer Required), Ball; 11.887 X 1.981 mm Incld In 2, 4, Ball; (A: W/ Lateral Tilt), Ball; 11.887 X 1.981 mm Incld In 4, Ball; (Use With R71977, R77713 Or R79733), Ball; 11.887 X 1.981 mm, Incld In 33, Ball; (-6), Ball; 11.887 X 1.981 mm Incld In 19, Ball; (Replacement Steering Valve), Ball; (A: For 9650 (69***01-) & 9750 (69***01-)) 11.887 X 1.981 mm, Ball; Incld In 2, 13, Ball; (2 Used Manual Lift Reel; 1 Used, Hydraulic Lift Reel), Ball; (For Al24244), Ball; (C: W/O Hitch), Ball; Id = 12 mm, Ball; (Ord Al69711), Ball; (With Mechanical Front Wheel Drive), Ball; (3 Used, Manual Lift Reel; 2 Used, Hydraulic Lift Reel), Ball; (55 Series, 770 And 790 Tractors), Ball; (Use With R55137), Ball; 11.887 X 1.981 mm, Incld In 18, Ball; (C: Incld In 0070028756 Fitting) 11.887 X 1.981 mm, O-Ring; (K1), Ball; (D: Incld In 0070006612 Fitting) 11.887 X 1.981 mm, Ball; (For R46856), Ball; (A) (Ord Al70120), Ball; (C: Note; 9550 (-70***00) 9550sh (-70***00)), Ball; 13mm (1/2") (Use With Ar67095), Ball; 1 cm (9/16"), Ball; (A), Ball; 11.887 X 1.981 mm (A), Ball; Pump To Clutch, Ball; (A: Include In R27212 Fitting And Amp, 0071341084 Tee Fitting) 11.887 X 1.981 mm, O-Ring; (With One Or Two Auxiliary. Functions), Ball; 11.887 X 1.981 mm, Incld In 28,33, Ball; (A) (Use Without Manual Destroke), Ball; (A) (B), Ball; 11.89 X 1.98 mm, Ball; (Sub For R44778, This Application), Ball; (B: W/O Eov Sump Valve) (C: (-Xxxxxx) 4050-00***49; 4250-00***79; 4450-01***85), Ball; 11.887 X 1.981 mm, Incld In 27,33,34, Ball; (Inlet And Outlet) (Sub For R78079, Appl), O-Ring; (Also Order At208911), Ball; (6501 And 6507), Ball; 11.887 X 1.981 mm, Incld In 6,11, Ball; 11.887 X 1.981 mm, Incld In 7,8, Ball; (F: Incld In R27212 Connector), Ball; (Use With Re502974), Ball; (Kit Ah63929), Ball; (Sub An250096), Ball; (Dual Selective Control), Ball; W/O Dust Suppression, Ball; Includes 61h1160, Ball; (Sub For U45768), Ball; (Kit Ah118274 And Ah113427), Ball; (Kit Ah108721), Ball; (Sidehill), Ball; (A) (Metric Ports), Ball; (B: Triple), Ball; (Kit Ae38021), O-Ring; 11.887 X 1.981 mm 11.300 X 2.200 mm, Ball; (A: (-Xxxxxx) 8560-00***00; 8760-00***00; 8960-00***00), Ball; 11.887 X 1.981 mm, Incld In 3, Ball; (Hydrostatic Drive), Ball; (2nd Scv), Ball; (Includes 4,13,22,47), Ball; (A: W/ Twine System), Ball; (A: Incld In 0070028756) 11.887 X 1.981 mm, Ball; (A: Incld In Cb01510018 Fitting & Cb01510017 Elbow Fitting) 11.887 X 1.981 mm, Ball; 0.468" X 5/64", Ball; (A: For Multicrop Machine Only), Ball; (Less Manual Destroke), Ball; R.H., Ball; 11.887 X 1.981 mm Incld In 17, 18, 30, 31, Ball; 11.887 X 1.981 mm Incld In 23, Ball; 11.887 X 1.981 mm Incld In 26, Ball; 11.887 X 1.981 mm, Incld In 11,12, Ball; 11.887 X 1.981 mm (B), Ball; Incld In 20, Ball; 11.887 X 1.981 mm, Incld In 7,8,9,12, Ball; 11.887 X 1.981 mm, Incld In 32, Ball; (9/16"), Ball; Use With Aa74707, Ball; (A: Incld In 0070028756 Fitting) 11.887 X 1.981 mm, Ball; (A: For Commandcenter), Ball; (Sub For R78079), Ball; (K1) (K2), Ball; (A: For 6650 From Ser.No. 50***94) (B: For 6750-6950 From Ser.No. 50***92), Ball; (A: Incld In 0070006612 & 0070028756 Fittings) 11.887 X 1.981 mm, Ball; Use W/ Re12411 Or M132725, Ball; (A: 5320n: Sn 23***09- 5420n: Sn 24***02- 5520n: Sn 25***23-), Ball; (Use With Replacement Steering Valve), O-Ring; (Without Auxiliary), Ball; 11.887 X 1.981 mm Incld In 26, 27, Ball, Ball; (Sub For T70177), Ball; (3 Used, Manual Lift Reel; 2 Used, Hydraulic Lift Reel And Fixed Drive Feeder House; 1 Used, Variable Drive Feeder House), Ball; (K: At167718 Replacement Cylinder Kit), Ball; For 4040, 4220, And 4440 Tractors, Ball; (Kit Ah101489 And Ah108721), Ball; (A) (Sub For Mg128826), Ball; 11.887 X 1.981 mm, Incld In 13, Ball; (Sub For Gg230-19166), O-Ring; (Four-Spool Valve), Ball; (B: Xxxxxx- 446(14***01) 546(14***01)), Ball; 11.887 X 1.981 mm Incld In 40, O-Ring; (K), Ball; (D: (Xxxxxx-) Tractor Serial No. 8760-00***19; 8960-00***61), Ball; (A: For Rigid Feeder House), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (B: Incl In R27212 & 0070028756 Fittings, 0071341084 Tee Fitting) 11.887 X 1.981 mm, Ball; 9000 Series Tractor, Ball; (A: For Reel Lift / Lower Orifice Kit), Ball; (A) (Ord Al70119), Ball; (Use With At35121), Ball; 11.887 X 1.981 mm Incld In 14, 22, Ball; (C), Ball; (C: Incl In R27212 & 0070028756 Fittings, Aw22821 Elbow Fitting, An193888 Adapter Fitting) 11.887 X 1.981 mm, Ball; (Not Used This Application), Ball; (4 Used On 25' Unit) (6 Used On 30' Or 35' Unit), Ball; (C: Incld In 0070006612 Fitting) 11.887 X 1.981 mm, Ball; (A: For 9650 (-69***00) & 9750 (-69***00)), Ball; 11.887 X 1.981 mm, Incld In 19, Ball; (A: (-Xxxxxx) Serial No. 8450-00***56; 8650-00***78), O-Ring; Switch Port Plug, Ball; (A: Germany) (B: Used On 4050e And 4250e Only), Ball; (A: Used On 4050e And 4250e Only), Ball; 11.887 X 1.981 mm, Incld In 12,16, Ball; (For R27218), Ball; (A) 11.887 X 1.981 mm, Ball; 11.887 X 1.981 mm, Incld In 29, Ball; 11.887 X 1.981 mm, Incld In 4,15, Ball; 11.887 X 1.981 mm Incld In 5, Ball; (A: Dual Scv), Ball; (Export), Ball; 11.887 X 1.981 mm Incld In 8, 13, 28, 50, Ball; (A: Incld In R27212 & 0070028756 Fittings) 11.887 X 1.981 mm, Ball; (Use With Ar63911), Ball; 11.887 X 1.981 mm, Incld In 2, Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (B: Incld In 0071393828 & R27212 Fittings) 11.887 X 1.981 mm, Ball; (A: European Version) (C: (-Xxxxxx) 4055-00***60; 4255-00***20; 4455-00***25), Ball; (A: Universal Kit - Applications Will Vary) (Metric Ports), Ball; (C: W/O Manual Destroke), Ball; (A) (Load Sense), Ball; (Use With Aa31975), Ball; (B: 9000 Series Tractors), Ball; 11.887 X 1.981 mm Incld In 2, Ball; (6502 And 6509), Ball; 11.887 X 1.981 mm, Incld In 11,30,33,41,58,66, Ball; (2 Used Less Rockshaft), Ball; (Sub For Mg128826), Ball; (A: Incld In 0070034014 Fitting) 11.887 X 1.981 mm Incl In 20, Ball; (Includes O-Ring R26375), Ball; (Sub For R78079 Or Re10259, This Application), Ball; 11.887 X 1.981 mm Incld In 28, Ball; 11.887 X 1.981 mm, Incld In 11,21,49, Ball; (For Al24244, Ar63911), Ball; (B) 11.887 X 1.981 mm, Ball; 11.887 X 1.981 mm, Incld In 14 | 4 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38258 Differential Lock (Oc-A)
| 34***11 | Spring Pin; 1/4"X 7/8" (Sub R66901, (2) R27507), Spring Pin; 6.350 X 22.225 mm (1/4" X 7/8"), Spring Pin; 1/4" X 7/8", Spring Pin, Spring Pin; 1/4" X 7/8",(L.H.), Spring Pin; 1/4" X 7/8" (Lh), Spring Pin; 1/4" X 7/8" 1/4" X 7/8", Spring Pin; 1/4" X 7/8", (Sub R66901 And (2) R27507), Spring Pin; 1/4"X7/8" (Sub R66901, (2) R27507), Spring Pin; 1/4" X 7/8" (Sub R66901, (2) R27507), Spring Pin; 1/4"X7/8", Spring Pin, Spring Pin; 1/4" X 7/8", (Sub R66901 And (2) R72654), Spring Pin; (Sub R66901, (2) R27507) | 3 |
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 2 |
| AR***75 | Housing; (Marked R68165), Housing; (D: Sub Components), Housing; (A), Housing; (A: Sub Components) (Marked R60970 Or R60971), Housing, Housing; (Sub R68165 And (2) 400r), Housing; (C: Sub Components), Housing; (A: Sub Components) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38299 Final Drive (Oc-A)
| 19***32 | Bolt; M16 X 130 (Hs=10.9) (Sub For M800598), Bolt; M16 X 130 Hs 10.9, Bolt; M16 X 130, Bolt; M16 X 130 (Hs, Head Marked 10.9), Bolt, Bolt; M16 X 130 Hs=10.9, Bolt; M16 X 130 M16 X 130, Bolt; M16 X 130 (Hs=10.9), Cap Screw; M16 X 130, (Sub For J901606), Cap Screw; (Sub For Ffsb108862), Cap Screw; M16 X 130, Cap Screw; M16 X 130, (Sub For Ffsb108862) | 14 |
| 19***43 | Bolt; M16 X 130, Bolt; M16 X 130 | 14 |
| F***1 | O-Ring, O-Ring; (A: W/ Secondary Brake) | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38300 Final Drive (Oc-B) (Axle Serial No. -026768)
| 19***86 | Cap Screw; (B: Steel Disk Rear Wheels (10 Bolt Hub)) M16 X 180 Hs=10.9, Cap Screw; (B: 5 Bolt Wheel) M16 X 180, Cap Screw; M16 X 180, Cap Screw, Cap Screw; M16 X 180 M16 X 180, Cap Screw; (B: 5 Bolt Wheel) M16 X 180 X 2, Cap Screw; M16 X 180 (Hs=10.9), Cap Screw; (B: 5 Bolt Wheel) M16 X 180 Hs=10.9, Cap Screw; M16 X 180, Cover Side | 14 |
| R1***80 | Thrust Washer, Thrust Washer; (Use With R120957), Thrust Washer; (Use With R120906), Thrust Washer; (Sub For R83096), Thrust Washer | 3 |
| R1***37 | Shaft; (Sub Re63683 ) (Also Order R127396), Shaft; (Sub For R83645) (Sub Re63683) (Also Order R127396) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38301,Re42105 Input Housing (Oc-A)
| 19***09 | Bolt, Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Ap40171 And Ap40172), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 M16x50 (10.9), Bolt; M16 X 50 (Hs, Sae 10.9), Bolt; (B: (Xxxxxx- ) 7610-00***79; 7710-00***83; 7810-00***66) M16 X 50 (Hs=10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu12701 And Lvu12702), Bolt; (A: Category Iii) M16 X 50, Bolt; M16 X 50 (Use With Re68963 Or Re68965), Bolt; (B: W/O Hitch) M16 X 50 Hs 10.9, Bolt; (A: 8520 (02***33- )) M16 X 50, Bolt; M16 X 50 (Hs=10.9), Bolt; M16 X 50 Hs 10.9, Bolt; (B: Category Iii) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 (10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Re275262 And Re275263), Bolt; (B: Category Iii) M16 X 50 (10, 9), Cap Screw; M16 X 50, (Sub For J921650) (Also Order 46***82), Bolt; M16 X 50 (Use With A59393 And A67052), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50, Bolt; M16 X 50, Cap Screw, Bolt; (B: Category Iii) M16 X 50 (10.9), Bolt; M16 X 50 (10.9), Bolt; M16 X 50, Hs 10.9, Bolt; M16 X 50 (Hs 10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu16367 And Lvu16368), Bolt; M16 X 50 (Use With Aa31281), Bolt; M16 X 50 Lh, Bolt; (A: Category Iii N) M16 X 50, Cap Screw; M16 X 50, (Sub For J901650), Cap Screw; M16 X 50, Bolt; (B: Tow-Behind) (D: Note; (71***06- ) Tow-Between (71***79- ) Tow-Behind) M16 X 50, Bolt; M16 X 50 (Sub For J901650), Bolt; M16 X 50 (Use With An220858), Bolt; M16x50, Bolt; M16 X 50 M16x50, Cap Screw; M16 X 50, (Sub For J921650), Bolt; M16 X 50 Tow-Behind, Bolt; M16 X 50 (Use Without Reversible Pads), Bolt; M16 X 50 M16x50 (10.9), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50, Bolt; M16 X 50 Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 (10.9), Bolt; (B: Less Hitch) M16 X 50 Hs=10.9, Bolt; (E: Serial Number For Model 5725 Is ( -00***59), For 5625 ( -Xxxxxx)) M16 X 50 (Use With Ap40171), Bolt; M16 X 50 (Sub For J921650), Bolt; M16 X 50 (Hs, Head Marked 10.9) Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Tow-Behind) (C: Note; ( -71***05) Tow-Between ( -71***78) Tow-Behind) M16 X 50, Bolt; (A: Setback Parallel Arms) M16 X 50, Bolt; M16 X 50 (Hs, Head Marked 10.9), Bolt; M16 X 50 Hs=10.9, Bolt; M16 X 50 (10.9) Cat Iii, Bolt; (B: 7210-02***07, 7410-02***97) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 M16x50 (10.9), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50 (Use With Aa31281) | 5 |
| 19***59 | Cap Screw; M16 X 60 (Hs, Head Marked 10.9), Cap Screw; M16 X 60 Sub For 19m8295, Cap Screw; M16 X 60, Cap Screw; M16 X 60 (Greasable Spindle) (Hs 10.9), Cap Screw; (A: Used With Wide Pickup) M16 X 60, Cap Screw; M16 X 60 (Hs=10.9) Rh, Cap Screw; M16 X 60 (Lh), Cap Screw; M16 X 60 (Greasable Spindle), Cap Screw; (A: Hi-Clearance Fuel Tank) M16 X 60 (10.9), Cap Screw; M16 X 60 10.9, Cap Screw; M16 X 60 Hs=10.9, Cap Screw; M16 X 60 M16x60 (10.9), Cap Screw; M16x60 (10.9), Cap Screw; M16 X 60 Lh, Cap Screw; M16 X 60 Hs 10.9, Cap Screw; M16 X 60, Hs 10.9, Cap Screw; M16 X 60 (10.9), Cap Screw; (A) M16 X 60, Cap Screw; M16 X 60 M16 X 60, Cap Screw; M16 X 60 (Hs 10.9), Cap Screw; (A: 8520 (02***33- )) M16 X 60 Hs=10.9, Cap Screw; (A: 7210-02***06, 7410-02***96) M16 X 60, Cap Screw; M16 X 60 Sub For 19m7343, Cap Screw; M16 X 60 (Use With T14386), Cap Screw; (Sub For Ffsb109225) M16 X 60, Cap Screw, Cap Screw; M16 X 60 M16, Cap Screw; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 60 (Use With T14386), Cap Screw; M16 X 60 (Hs=10.9), Cap Screw; M16 X 60, Cap Screw; M16 X 60 Hs=10.9 (Use With T14386), Cap Screw; M16 X 60, (Use With Am120965) | 1 |
| JD***13 | Bearing Cone | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38302,Re42106 Input Housing (Oc-B)
| 19***09 | Bolt, Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Ap40171 And Ap40172), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 M16x50 (10.9), Bolt; M16 X 50 (Hs, Sae 10.9), Bolt; (B: (Xxxxxx- ) 7610-00***79; 7710-00***83; 7810-00***66) M16 X 50 (Hs=10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu12701 And Lvu12702), Bolt; (A: Category Iii) M16 X 50, Bolt; M16 X 50 (Use With Re68963 Or Re68965), Bolt; (B: W/O Hitch) M16 X 50 Hs 10.9, Bolt; (A: 8520 (02***33- )) M16 X 50, Bolt; M16 X 50 (Hs=10.9), Bolt; M16 X 50 Hs 10.9, Bolt; (B: Category Iii) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 (10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Re275262 And Re275263), Bolt; (B: Category Iii) M16 X 50 (10, 9), Cap Screw; M16 X 50, (Sub For J921650) (Also Order 46***82), Bolt; M16 X 50 (Use With A59393 And A67052), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50, Bolt; M16 X 50, Cap Screw, Bolt; (B: Category Iii) M16 X 50 (10.9), Bolt; M16 X 50 (10.9), Bolt; M16 X 50, Hs 10.9, Bolt; M16 X 50 (Hs 10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu16367 And Lvu16368), Bolt; M16 X 50 (Use With Aa31281), Bolt; M16 X 50 Lh, Bolt; (A: Category Iii N) M16 X 50, Cap Screw; M16 X 50, (Sub For J901650), Cap Screw; M16 X 50, Bolt; (B: Tow-Behind) (D: Note; (71***06- ) Tow-Between (71***79- ) Tow-Behind) M16 X 50, Bolt; M16 X 50 (Sub For J901650), Bolt; M16 X 50 (Use With An220858), Bolt; M16x50, Bolt; M16 X 50 M16x50, Cap Screw; M16 X 50, (Sub For J921650), Bolt; M16 X 50 Tow-Behind, Bolt; M16 X 50 (Use Without Reversible Pads), Bolt; M16 X 50 M16x50 (10.9), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50, Bolt; M16 X 50 Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 (10.9), Bolt; (B: Less Hitch) M16 X 50 Hs=10.9, Bolt; (E: Serial Number For Model 5725 Is ( -00***59), For 5625 ( -Xxxxxx)) M16 X 50 (Use With Ap40171), Bolt; M16 X 50 (Sub For J921650), Bolt; M16 X 50 (Hs, Head Marked 10.9) Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Tow-Behind) (C: Note; ( -71***05) Tow-Between ( -71***78) Tow-Behind) M16 X 50, Bolt; (A: Setback Parallel Arms) M16 X 50, Bolt; M16 X 50 (Hs, Head Marked 10.9), Bolt; M16 X 50 Hs=10.9, Bolt; M16 X 50 (10.9) Cat Iii, Bolt; (B: 7210-02***07, 7410-02***97) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 M16x50 (10.9), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50 (Use With Aa31281) | 5 |
| 19***59 | Cap Screw; M16 X 60 (Hs, Head Marked 10.9), Cap Screw; M16 X 60 Sub For 19m8295, Cap Screw; M16 X 60, Cap Screw; M16 X 60 (Greasable Spindle) (Hs 10.9), Cap Screw; (A: Used With Wide Pickup) M16 X 60, Cap Screw; M16 X 60 (Hs=10.9) Rh, Cap Screw; M16 X 60 (Lh), Cap Screw; M16 X 60 (Greasable Spindle), Cap Screw; (A: Hi-Clearance Fuel Tank) M16 X 60 (10.9), Cap Screw; M16 X 60 10.9, Cap Screw; M16 X 60 Hs=10.9, Cap Screw; M16 X 60 M16x60 (10.9), Cap Screw; M16x60 (10.9), Cap Screw; M16 X 60 Lh, Cap Screw; M16 X 60 Hs 10.9, Cap Screw; M16 X 60, Hs 10.9, Cap Screw; M16 X 60 (10.9), Cap Screw; (A) M16 X 60, Cap Screw; M16 X 60 M16 X 60, Cap Screw; M16 X 60 (Hs 10.9), Cap Screw; (A: 8520 (02***33- )) M16 X 60 Hs=10.9, Cap Screw; (A: 7210-02***06, 7410-02***96) M16 X 60, Cap Screw; M16 X 60 Sub For 19m7343, Cap Screw; M16 X 60 (Use With T14386), Cap Screw; (Sub For Ffsb109225) M16 X 60, Cap Screw, Cap Screw; M16 X 60 M16, Cap Screw; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 60 (Use With T14386), Cap Screw; M16 X 60 (Hs=10.9), Cap Screw; M16 X 60, Cap Screw; M16 X 60 Hs=10.9 (Use With T14386), Cap Screw; M16 X 60, (Use With Am120965) | 1 |
| JD***70 | Bearing Cup | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38308 Input Yoke (Oc-A)
| R1***74 | Universal Joint Yoke; (Sub R120162), Universal Joint Yoke; (Power Shift), Universal Joint Yoke; Mst (Sub R120162) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38309 Input Yoke (Oc-B)
| 12***01 | Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036) | 8 |
| 19***03 | Cap Screw; 1/2" X 1", Unf, Cap Screw; 1/2" X 1" | 8 |
| R8***29 | Universal Joint Yoke; Pst, Front, Universal Joint Yoke, Universal Joint Yoke; Front, (Power Shift), Universal Joint Yoke; (Pst) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38312,Re38313,Re37956,Re37958 Differential Bearing Quills (Oc-1 And Oc-2)
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 4 |
| JD***19 | Bearing Cone; (Use With R42307, R57747 Or Ar44327), Bearing Cone; R.H., Bearing Cone, Bearing Cone; (A) L.H., Bearing Cone; (Use With R42306, R42307, R49649 Or R57747), Bearing Cone; (A), Bearing Cone; (C), Bearing Cone; Lh, (Sub Jd8298, Jd8962, R73274, R94631 And (3) 34h311), Bearing Cone; Lh (Sub Jd8298, Jd8962, R73274, R94631 And (3) 34h311), Bearing Cone; (A: Sub Jd8298, Jd8962, R73274, R94631, (12) R43369 And (3) 34h311) Lh, Bearing Cone; (A: Sub Jd8298, Jd8962, R73274, R94631 And (3) 34h311) Lh, Bearing Cone; (A: Sub Jd8298, Jd8962, R73274, R94631, R43369 And 34h311) Lh, Bearing Cone; Rh | 1 |
| JD***98 | Bearing Cup, Bearing Cup; L.H. (Use With R73274), Bearing Cup; (Use With R73273 Or R94631) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re38434,Re38435 Axle Housing And Shaft (Oc-2)
| AR***12 | Seal | 1 |
| H8***36 | Elbow Fitting; 90°, Elbow Fitting | 1 |
| JD***27 | Bearing Cup; (Order Re293316), Bearing Cup, Bearing Cup; (Oredr Re293316), Bearing Cup, Bearing Cup; Order Re293316 | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re41175,Re38255 Differential Case (Oc-A) (Oc-A)
| F***1 | O-Ring, O-Ring; (A: W/ Secondary Brake) | 3 |
| R2***75 | Drain Plug; (Bottom Right, Inside Drain Port), Fitting; No Piler Option, Fitting; (Use With H122391 And U12547), Fitting; (For Ar39168), Fitting; (Sub For R55150), Fitting; (Not Used With Hydrostatic Drive Reel), Fitting; (Sub For T64769), Fitting; 1-1/16" Use With R58773, Fitting; 1-1/16" (For Ar39167), Fitting; (W/O Power Take-Off), Fitting; (1 1/16-12 Un) (Use With R58717), Fitting; (E: (-Xxxxxx) Transmission Serial No. 4650-00***70; 4850-00***74), Fitting; (For R71586), Fitting; Rh, Drain Plug, Fitting; (A: Hexagonal) 1-1/16"-12 Un (Use With R105549), Fitting; 1-1/4" X 1", Fitting; 1-1/16", (Use With R45227), Fitting; Inlet Port, Fitting, Fitting; (D: (Xxxxxx-) Tractor Serial No. 8560-00***01; 8760-00***01; 8960-00***01) 1-1/4" X 1", Fitting; 1-1/16", Fitting; Rear, Fitting; Standard Axle, Drain Plug; (A) (C), Fitting; (Use With R124286 Or R124524), Fitting; (A) 1-1/16" |, Fitting; (Not Illustrated) (5460, 8630, 5820), Fitting; Nsep (Ord Ah131308), Fitting; (Use With R39317 Or R60969), Fitting; (For Ar39167), Fitting; (A), Fitting; (Not Illustrated, Or Used This Application), Fitting; Incld In 1, Fitting; 1-1/16" (Use With R71586), Fitting; (A: (-Xxxxxx) 4755-00***22; 4955-00***73), Fitting; (Open Center Hydraulic System), Fitting; (B) 1-1/16", Fitting; 1-1/16", (Use With R58773), Fitting; (B: W/O Power Take-Off), Fitting; Includes (9) U12547, Fitting; (A) 1-1/16", Fitting; 1-1/16"-12un, Para R105549, Fitting; (Sub B2982r, This Application), Fitting; (Ord Kit Ah131308), Fitting; (B: Without Residue Disposal), Fitting; (B: Without Lift Assist), Fitting; (Use With R45227), Fitting; 1/16''-12 Un, Fitting; 1-1/16", (Use With R71586), Fitting; (Use With R74447), Fitting; 'A', Fitting; (A: For Combines Without Chaff Spreader), Fitting; (Sub For At74121), Fitting; (Use With R71586), Fitting; (B: W/O Lift Assist), Fitting; (Sub For T64769, This Application), Fitting; 1-1/16", (Use With Ar39167), Fitting; (Use With R39172 Or R39316), Fitting; (B), Fitting; Less Power Rear Wheel Drive, Fitting; (A: W/O Hydracushioned Seat), Fitting; Order Kit Ah131308, Fitting; 1-1/16"-12un, Fitting; (Replaced R27474), Fitting; (Power Beyond Port), Fitting; (Rear), Fitting; (Not Used With Hydraulic Drive Reel), Fitting; (Use With R105549), Fitting; (Less Rockshaft), Fitting; (G: (-Xxxxxx) Transmission Serial No. 4050-00***34; 4250-00***52; 4450-00***19), Fitting; 1-1/16" X 1", Fitting; (B: W/O Hydracushioned Seat), Fitting; (Sub T64769), Fitting; (Side), Fitting; (Oil Cooler Return Line Hole In Block), Fitting; Reservoir Drain, Fitting; 1-1/16" (For Ar39168), Fitting; (B: Hexagonal) 1-1/16"-12 Un (Use With R105549) | 1 |
| R***5 | O-Ring; Kit (Ord Az24156), O-Ring, O-Ring; (Kit Az24156) | 4 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re44444 Standard Differential (Oc-B)
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 2 |
| AR***75 | Housing; (Marked R68165), Housing; (D: Sub Components), Housing; (A), Housing; (A: Sub Components) (Marked R60970 Or R60971), Housing, Housing; (Sub R68165 And (2) 400r), Housing; (C: Sub Components), Housing; (A: Sub Components) | 1 |
| JD***19 | Bearing Cone; (Use With R42307, R57747 Or Ar44327), Bearing Cone; R.H., Bearing Cone, Bearing Cone; (A) L.H., Bearing Cone; (Use With R42306, R42307, R49649 Or R57747), Bearing Cone; (A), Bearing Cone; (C), Bearing Cone; Lh, (Sub Jd8298, Jd8962, R73274, R94631 And (3) 34h311), Bearing Cone; Lh (Sub Jd8298, Jd8962, R73274, R94631 And (3) 34h311), Bearing Cone; (A: Sub Jd8298, Jd8962, R73274, R94631, (12) R43369 And (3) 34h311) Lh, Bearing Cone; (A: Sub Jd8298, Jd8962, R73274, R94631 And (3) 34h311) Lh, Bearing Cone; (A: Sub Jd8298, Jd8962, R73274, R94631, R43369 And 34h311) Lh, Bearing Cone; Rh | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re46453 Final Drive (Axle Serial No.026768- )
| 14***52 | Lock Nut; M8 M8, Lock Nut, Lock Nut; M8, Lock Nut; M6, Lock Nut; M8 (A), Lock Nut; (C: Autotrac) M8 | 3 |
| 19***90 | Cap Screw; M16 X 180, Cap Screw; M16 X 180 (Hs 12.9), Cap Screw; M16 X 180 (Hs 10.9), Cap Screw; M16 X 180 Hs 12.9, Cap Screw; M16 X 180 Hs=12.9, Cap Screw; M16 X 180 (Hs=12.9) | 14 |
| 19***86 | Cap Screw; (B: Steel Disk Rear Wheels (10 Bolt Hub)) M16 X 180 Hs=10.9, Cap Screw; (B: 5 Bolt Wheel) M16 X 180, Cap Screw; M16 X 180, Cap Screw, Cap Screw; M16 X 180 M16 X 180, Cap Screw; (B: 5 Bolt Wheel) M16 X 180 X 2, Cap Screw; M16 X 180 (Hs=10.9), Cap Screw; (B: 5 Bolt Wheel) M16 X 180 Hs=10.9, Cap Screw; M16 X 180, Cover Side | 14 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re47367 Input Yoke (Oc-C)
| R1***48 | Universal Joint Yoke; Mst (Sub R120768), Universal Joint Yoke; (Sub R120768) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re49373, Re49374 Input Housing (Oc-1) (Oc-A)
| 19***09 | Bolt, Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Ap40171 And Ap40172), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 M16x50 (10.9), Bolt; M16 X 50 (Hs, Sae 10.9), Bolt; (B: (Xxxxxx- ) 7610-00***79; 7710-00***83; 7810-00***66) M16 X 50 (Hs=10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu12701 And Lvu12702), Bolt; (A: Category Iii) M16 X 50, Bolt; M16 X 50 (Use With Re68963 Or Re68965), Bolt; (B: W/O Hitch) M16 X 50 Hs 10.9, Bolt; (A: 8520 (02***33- )) M16 X 50, Bolt; M16 X 50 (Hs=10.9), Bolt; M16 X 50 Hs 10.9, Bolt; (B: Category Iii) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 (10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Re275262 And Re275263), Bolt; (B: Category Iii) M16 X 50 (10, 9), Cap Screw; M16 X 50, (Sub For J921650) (Also Order 46***82), Bolt; M16 X 50 (Use With A59393 And A67052), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50, Bolt; M16 X 50, Cap Screw, Bolt; (B: Category Iii) M16 X 50 (10.9), Bolt; M16 X 50 (10.9), Bolt; M16 X 50, Hs 10.9, Bolt; M16 X 50 (Hs 10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu16367 And Lvu16368), Bolt; M16 X 50 (Use With Aa31281), Bolt; M16 X 50 Lh, Bolt; (A: Category Iii N) M16 X 50, Cap Screw; M16 X 50, (Sub For J901650), Cap Screw; M16 X 50, Bolt; (B: Tow-Behind) (D: Note; (71***06- ) Tow-Between (71***79- ) Tow-Behind) M16 X 50, Bolt; M16 X 50 (Sub For J901650), Bolt; M16 X 50 (Use With An220858), Bolt; M16x50, Bolt; M16 X 50 M16x50, Cap Screw; M16 X 50, (Sub For J921650), Bolt; M16 X 50 Tow-Behind, Bolt; M16 X 50 (Use Without Reversible Pads), Bolt; M16 X 50 M16x50 (10.9), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50, Bolt; M16 X 50 Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 (10.9), Bolt; (B: Less Hitch) M16 X 50 Hs=10.9, Bolt; (E: Serial Number For Model 5725 Is ( -00***59), For 5625 ( -Xxxxxx)) M16 X 50 (Use With Ap40171), Bolt; M16 X 50 (Sub For J921650), Bolt; M16 X 50 (Hs, Head Marked 10.9) Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Tow-Behind) (C: Note; ( -71***05) Tow-Between ( -71***78) Tow-Behind) M16 X 50, Bolt; (A: Setback Parallel Arms) M16 X 50, Bolt; M16 X 50 (Hs, Head Marked 10.9), Bolt; M16 X 50 Hs=10.9, Bolt; M16 X 50 (10.9) Cat Iii, Bolt; (B: 7210-02***07, 7410-02***97) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 M16x50 (10.9), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50 (Use With Aa31281) | 5 |
| 19***59 | Cap Screw; M16 X 60 (Hs, Head Marked 10.9), Cap Screw; M16 X 60 Sub For 19m8295, Cap Screw; M16 X 60, Cap Screw; M16 X 60 (Greasable Spindle) (Hs 10.9), Cap Screw; (A: Used With Wide Pickup) M16 X 60, Cap Screw; M16 X 60 (Hs=10.9) Rh, Cap Screw; M16 X 60 (Lh), Cap Screw; M16 X 60 (Greasable Spindle), Cap Screw; (A: Hi-Clearance Fuel Tank) M16 X 60 (10.9), Cap Screw; M16 X 60 10.9, Cap Screw; M16 X 60 Hs=10.9, Cap Screw; M16 X 60 M16x60 (10.9), Cap Screw; M16x60 (10.9), Cap Screw; M16 X 60 Lh, Cap Screw; M16 X 60 Hs 10.9, Cap Screw; M16 X 60, Hs 10.9, Cap Screw; M16 X 60 (10.9), Cap Screw; (A) M16 X 60, Cap Screw; M16 X 60 M16 X 60, Cap Screw; M16 X 60 (Hs 10.9), Cap Screw; (A: 8520 (02***33- )) M16 X 60 Hs=10.9, Cap Screw; (A: 7210-02***06, 7410-02***96) M16 X 60, Cap Screw; M16 X 60 Sub For 19m7343, Cap Screw; M16 X 60 (Use With T14386), Cap Screw; (Sub For Ffsb109225) M16 X 60, Cap Screw, Cap Screw; M16 X 60 M16, Cap Screw; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 60 (Use With T14386), Cap Screw; M16 X 60 (Hs=10.9), Cap Screw; M16 X 60, Cap Screw; M16 X 60 Hs=10.9 (Use With T14386), Cap Screw; M16 X 60, (Use With Am120965) | 1 |
| JD***41 | Bearing Cone, Bearing Cone; (Sub For Jd9068, This Application) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re50501 Spiral Bevel (Oc-B)
| RE***27 | Bevel Gear; Front (Marked R113705 And R113706), Bevel Gear; Rear (Marked R113705 And R113706), Bevel Gear; (A: 100 mm Axle) (D: Rear) (Marked R113706 And R113705), Bevel Gear; (B: Rear) (Marked R113706 And R113705), Bevel Gear; (B: 110mm Axle) (Marked R113705 And R113706) (Front, Pst) (Rear, Mst), Bevel Gear; (B: 110 mm Axle) (D: Rear) (Marked R113706 And R113705), Bevel Gear; (Marked R113705 And R113706) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re50502 Spiral Bevel (Oc-B)
| RE***06 | Bevel Gear; (B: 110 mm Axle) (C: Front) (Marked R108351 And R108350), Bevel Gear; Front (Marked R108350 And R108351), Bevel Gear; (B: 110mm Axle) (Marked R108351 And R108350) (Rear, Pst) (Front, Mst), Bevel Gear; (A: Front) (Marked R108351 And R108350), Bevel Gear; (A: 100 mm Axle) (C: Front) (Marked R108351 And R108350), Bevel Gear; (Marked R108350 And R108351), Bevel Gear; Rear (Marked R108350 And R108351) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re50510 Spiral Bevel (Oc-B)
| RE***28 | Bevel Gear; Front (Marked R113707 And R116008), Bevel Gear; Rear (Marked R113707 And R116008), Bevel Gear; (Marked R113707 And R116008) (Rear, Mst), Bevel Gear; (A: 100 mm Axle) (D: Rear) (Marked R113707 And R116008), Bevel Gear; (Marked R113707 And R116008) (Front, Pst), Bevel Gear; (Marked R113707 And R116008), Bevel Gear; (A: 100mm Axle) (Marked R113707 And R116008) (Rear, Mst) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re50511 Spiral Bevel (Oc-A)
| RE***29 | Bevel Gear; (Marked R113708 And R116009) (Rear, Pst), Bevel Gear; (A: 100 mm Axle) (C: Front) (Marked R113708 And R116009), Bevel Gear; Rear (Marked R113708 And R116009), Bevel Gear; Front (Marked R113708 And R116009), Bevel Gear; (A: 100mm Axle) (Marked R113708 And R116009) (Front, Mst), Bevel Gear; (Marked R113708 And R116009) (Front, Mst), Bevel Gear; (Marked R113708 And R116009) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re50814 Input Housing (Oc-A)
| 19***09 | Bolt, Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Ap40171 And Ap40172), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 M16x50 (10.9), Bolt; M16 X 50 (Hs, Sae 10.9), Bolt; (B: (Xxxxxx- ) 7610-00***79; 7710-00***83; 7810-00***66) M16 X 50 (Hs=10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu12701 And Lvu12702), Bolt; (A: Category Iii) M16 X 50, Bolt; M16 X 50 (Use With Re68963 Or Re68965), Bolt; (B: W/O Hitch) M16 X 50 Hs 10.9, Bolt; (A: 8520 (02***33- )) M16 X 50, Bolt; M16 X 50 (Hs=10.9), Bolt; M16 X 50 Hs 10.9, Bolt; (B: Category Iii) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 (10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9) (Use With Re275262 And Re275263), Bolt; (B: Category Iii) M16 X 50 (10, 9), Cap Screw; M16 X 50, (Sub For J921650) (Also Order 46***82), Bolt; M16 X 50 (Use With A59393 And A67052), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50, Bolt; M16 X 50, Cap Screw, Bolt; (B: Category Iii) M16 X 50 (10.9), Bolt; M16 X 50 (10.9), Bolt; M16 X 50, Hs 10.9, Bolt; M16 X 50 (Hs 10.9), Bolt; M16 X 50 (Hs, Head Marked 10.9), (Use With Lvu16367 And Lvu16368), Bolt; M16 X 50 (Use With Aa31281), Bolt; M16 X 50 Lh, Bolt; (A: Category Iii N) M16 X 50, Cap Screw; M16 X 50, (Sub For J901650), Cap Screw; M16 X 50, Bolt; (B: Tow-Behind) (D: Note; (71***06- ) Tow-Between (71***79- ) Tow-Behind) M16 X 50, Bolt; M16 X 50 (Sub For J901650), Bolt; M16 X 50 (Use With An220858), Bolt; M16x50, Bolt; M16 X 50 M16x50, Cap Screw; M16 X 50, (Sub For J921650), Bolt; M16 X 50 Tow-Behind, Bolt; M16 X 50 (Use Without Reversible Pads), Bolt; M16 X 50 M16x50 (10.9), Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50, Bolt; M16 X 50 Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Cat. 3 Telescopic Or Flat-Steel Draft Links) M16 X 50 (10.9), Bolt; (B: Less Hitch) M16 X 50 Hs=10.9, Bolt; (E: Serial Number For Model 5725 Is ( -00***59), For 5625 ( -Xxxxxx)) M16 X 50 (Use With Ap40171), Bolt; M16 X 50 (Sub For J921650), Bolt; M16 X 50 (Hs, Head Marked 10.9) Bottom 2 Plus Front And Bottom Each Side, Bolt; (B: Tow-Behind) (C: Note; ( -71***05) Tow-Between ( -71***78) Tow-Behind) M16 X 50, Bolt; (A: Setback Parallel Arms) M16 X 50, Bolt; M16 X 50 (Hs, Head Marked 10.9), Bolt; M16 X 50 Hs=10.9, Bolt; M16 X 50 (10.9) Cat Iii, Bolt; (B: 7210-02***07, 7410-02***97) M16 X 50, Bolt; (A: Category Iii N) M16 X 50 M16x50 (10.9), Bolt; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 50 (Use With Aa31281) | 5 |
| 19***59 | Cap Screw; M16 X 60 (Hs, Head Marked 10.9), Cap Screw; M16 X 60 Sub For 19m8295, Cap Screw; M16 X 60, Cap Screw; M16 X 60 (Greasable Spindle) (Hs 10.9), Cap Screw; (A: Used With Wide Pickup) M16 X 60, Cap Screw; M16 X 60 (Hs=10.9) Rh, Cap Screw; M16 X 60 (Lh), Cap Screw; M16 X 60 (Greasable Spindle), Cap Screw; (A: Hi-Clearance Fuel Tank) M16 X 60 (10.9), Cap Screw; M16 X 60 10.9, Cap Screw; M16 X 60 Hs=10.9, Cap Screw; M16 X 60 M16x60 (10.9), Cap Screw; M16x60 (10.9), Cap Screw; M16 X 60 Lh, Cap Screw; M16 X 60 Hs 10.9, Cap Screw; M16 X 60, Hs 10.9, Cap Screw; M16 X 60 (10.9), Cap Screw; (A) M16 X 60, Cap Screw; M16 X 60 M16 X 60, Cap Screw; M16 X 60 (Hs 10.9), Cap Screw; (A: 8520 (02***33- )) M16 X 60 Hs=10.9, Cap Screw; (A: 7210-02***06, 7410-02***96) M16 X 60, Cap Screw; M16 X 60 Sub For 19m7343, Cap Screw; M16 X 60 (Use With T14386), Cap Screw; (Sub For Ffsb109225) M16 X 60, Cap Screw, Cap Screw; M16 X 60 M16, Cap Screw; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) M16 X 60 (Use With T14386), Cap Screw; M16 X 60 (Hs=10.9), Cap Screw; M16 X 60, Cap Screw; M16 X 60 Hs=10.9 (Use With T14386), Cap Screw; M16 X 60, (Use With Am120965) | 1 |
| JD***13 | Bearing Cone | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1600 Axle : Re52126,Re52127 Differential Case(Oc-1)
| F***1 | O-Ring, O-Ring; (A: W/ Secondary Brake) | 3 |
| R1***03 | Plug, Plug; (Sub For R54846) | 1 |
| R1***77 | Structural Tubing; (Sub For R99861 ) (Sub R132574), Structural Tubing; (Non-Pressurized), Structural Tubing; (Sub For R97206 And R99861 ) (Sub R132574), Structural Tubing; (Sub For R97206 Or R99861) (Sub R132574 And R112210), Structural Tubing; (Sub R132574), Structural Tubing; (Sub R132574 And R112210) (Non-Pressurized), Structural Tubing; (Sub R132574 And R112210), Structural Tubing; (Sub For R97206 ) (Sub R132574) | 1 |
Axle Teammate I 1800 Axle
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Internal Brake Lines (Oc-2, Oc-B And Oc-B)
| AR***17 | Oil Line | 2 |
| AR***18 | Oil Line | 2 |
| AT***33 | Elbow Fitting; 90°, (Sub For Ar26771), Elbow Fitting; (E), Elbow Fitting; 90° (Illustrated) (Sub For Ar26771), Elbow Fitting; (Use With Ar89956) (Not Used This Application), Elbow Fitting; (A) (B) (D) (Sub For Ar26771), Elbow Fitting; 37 Degree Flare, Elbow Fitting; (Sub Re56322), Elbow Fitting; (For Ar90338, Re23758, Re23929), Elbow Fitting; 1/2"-20unf X 1/2"-20unf, Elbow Fitting; (Sub For Ar26771), Elbow Fitting; (Sub For Ar26771) (Sub Re56322), Elbow Fitting; 90°, Elbow Fitting; (For Ar89956, Or Re27848), Elbow Fitting; (B) 90°, Elbow Fitting; Rh, Elbow Fitting; Elbow, 90°, (Sub For Ar26771) (Sub Re56322), Elbow Fitting; (Sub For R57641, This Application), Elbow Fitting; 1/2"-20 X 1/2"-20, Elbow Fitting; 60°, Elbow Fitting; (C: ( -Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00), Elbow Fitting; (A), Elbow Fitting; 90° (Sub For Ar26771), Elbow Fitting; (Use With Ar94027), Elbow Fitting, Elbow Fitting; (B: W/O Sound-Gard Body), Elbow Fitting; (For 5/16" I.D. Oil Pipe) (Sub For Ar26771), Elbow Fitting; (6531a) (Sub For Ar26771) (Sub Re56322), Elbow Fitting; (Use With Ar89956), Elbow Fitting; (W/O Sgb) (Sub For Ar26771), Elbow Fitting; (W/O Sgb) (Sub For Ar26771) (Sub Re56322) | 6 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38162 Spiral Bevel Input Pinion And Ring Gear Set (Oc-1)
| AR***63 | Gear; R.H. Assembly (Marked R73145 And R73147 ) (Also Order Re50118) | 1 |
| R4***36 | Dowel Pin | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38163 Spiral Bevel Input Pinion And Ring Gear Set (Oc-1)
| AR***64 | Gear; L.H. Assembly (Marked R73146 And R73148 ) (Also Order Re50118) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38164 Spiral Bevel
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38166 Input Yoke (Oc-1)
| AR***28 | Yoke | 1 |
| R7***63 | Universal Joint Yoke | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38167 Input Yoke
| R4***06 | Chassis; Track Frame - Right-Hand, Lgp Dozer Models, Bushing, Chassis; Track Frame - Right-Hand, 74 Inch Gauge Lgp Dozer Models, Lgp Dozer Models | 1 |
| RE***40 | Yoke | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38189 Axle Housing And Shaft (Oc-2, Oc-3)
| 15***59 | Pipe Plug; (A: 12 Speed) 1/4", Pipe Plug; (A: For Commandcenter) 1/4", Pipe Plug; 1/4" (12-Speed), Pipe Plug; 1/4" (Engine Marked 3tne74c-Ejuv), (Sub For Epc200683), Pipe Plug; (A: For Prodrive) 1/4", Pipe Plug; 1/4", (1 Used Dual) (2 Used Triple), Pipe Plug; 1/4" Use Ty9374, Pipe Plug; Hex. Ctsk., 1/4", Pipe Plug; 1/4", (Sub For R106103), Pipe Plug; 1/4", (3020*), Pipe Plug; 1/4" (Ea-D, De-01), Pipe Plug; 1/4" (Dh-01, Dh-02, Dn-03, Hc-D And Nb-D), Pipe Plug; (B: 24 Speed) 1/4", Pipe Plug; 1/4" (Engine Marked 3tne74c-Juv), Pipe Plug, Pipe Plug; 1/4", (Ha-D, Hb-D, Na-D), Pipe Plug; 6.35mm (1/4"), Pipe Plug; (B) 1/4", Pipe Plug; 1/4" (A), Pipe Plug; 1/4", (3020e), Pipe Plug; 1/4", (1 Used, Dual) (2 Used, Triple), Pipe Plug; 1/4", Pipe Plug; 1/4", (3020&), Pipe Plug; (A) (B) (C) 1/4", Pipe Plug; 1/4", Hex, Csk, Pipe Plug; 1/4", (3020l), Pipe Plug; 1/4", (Sub For Epc200683), Pipe Plug; 1/4", (Code 3300 And 3303), Pipe Plug; 1/4", (Use With R36902 Or R40632), Pipe Plug; 1/4" (Sub For Epc200683), Pipe Plug; 1/4" Sub Re168481, Pipe Plug; 1/4", Pipe Plug; 1/4" (24-Speed), Pipe Plug; Use Ty9374, Pipe Plug; 1/4", (Dual) (2 Used Triple), Pipe Plug; 1/4", (Na-D), Pipe Plug; (A: Less Rockshaft) 1/4", Pipe Plug; (Sub For Th111958), Pipe Plug; (A) 1/4", Pipe Plug; 1/4" 1/4" | 1 |
| AR***12 | Seal | 1 |
| AR***73 | Housing | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38190 And Re38188 Axle Housing And Shaft (Oc-4)
| 15***59 | Pipe Plug; (A: 12 Speed) 1/4", Pipe Plug; (A: For Commandcenter) 1/4", Pipe Plug; 1/4" (12-Speed), Pipe Plug; 1/4" (Engine Marked 3tne74c-Ejuv), (Sub For Epc200683), Pipe Plug; (A: For Prodrive) 1/4", Pipe Plug; 1/4", (1 Used Dual) (2 Used Triple), Pipe Plug; 1/4" Use Ty9374, Pipe Plug; Hex. Ctsk., 1/4", Pipe Plug; 1/4", (Sub For R106103), Pipe Plug; 1/4", (3020*), Pipe Plug; 1/4" (Ea-D, De-01), Pipe Plug; 1/4" (Dh-01, Dh-02, Dn-03, Hc-D And Nb-D), Pipe Plug; (B: 24 Speed) 1/4", Pipe Plug; 1/4" (Engine Marked 3tne74c-Juv), Pipe Plug, Pipe Plug; 1/4", (Ha-D, Hb-D, Na-D), Pipe Plug; 6.35mm (1/4"), Pipe Plug; (B) 1/4", Pipe Plug; 1/4" (A), Pipe Plug; 1/4", (3020e), Pipe Plug; 1/4", (1 Used, Dual) (2 Used, Triple), Pipe Plug; 1/4", Pipe Plug; 1/4", (3020&), Pipe Plug; (A) (B) (C) 1/4", Pipe Plug; 1/4", Hex, Csk, Pipe Plug; 1/4", (3020l), Pipe Plug; 1/4", (Sub For Epc200683), Pipe Plug; 1/4", (Code 3300 And 3303), Pipe Plug; 1/4", (Use With R36902 Or R40632), Pipe Plug; 1/4" (Sub For Epc200683), Pipe Plug; 1/4" Sub Re168481, Pipe Plug; 1/4", Pipe Plug; 1/4" (24-Speed), Pipe Plug; Use Ty9374, Pipe Plug; 1/4", (Dual) (2 Used Triple), Pipe Plug; 1/4", (Na-D), Pipe Plug; (A: Less Rockshaft) 1/4", Pipe Plug; (Sub For Th111958), Pipe Plug; (A) 1/4", Pipe Plug; 1/4" 1/4" | 1 |
| AR***12 | Seal | 1 |
| JD***27 | Bearing Cup; (Order Re293316), Bearing Cup, Bearing Cup; (Oredr Re293316), Bearing Cup, Bearing Cup; Order Re293316 | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38191 Axle Housing And Shaft (Oc-4)
| 15***59 | Pipe Plug; (A: 12 Speed) 1/4", Pipe Plug; (A: For Commandcenter) 1/4", Pipe Plug; 1/4" (12-Speed), Pipe Plug; 1/4" (Engine Marked 3tne74c-Ejuv), (Sub For Epc200683), Pipe Plug; (A: For Prodrive) 1/4", Pipe Plug; 1/4", (1 Used Dual) (2 Used Triple), Pipe Plug; 1/4" Use Ty9374, Pipe Plug; Hex. Ctsk., 1/4", Pipe Plug; 1/4", (Sub For R106103), Pipe Plug; 1/4", (3020*), Pipe Plug; 1/4" (Ea-D, De-01), Pipe Plug; 1/4" (Dh-01, Dh-02, Dn-03, Hc-D And Nb-D), Pipe Plug; (B: 24 Speed) 1/4", Pipe Plug; 1/4" (Engine Marked 3tne74c-Juv), Pipe Plug, Pipe Plug; 1/4", (Ha-D, Hb-D, Na-D), Pipe Plug; 6.35mm (1/4"), Pipe Plug; (B) 1/4", Pipe Plug; 1/4" (A), Pipe Plug; 1/4", (3020e), Pipe Plug; 1/4", (1 Used, Dual) (2 Used, Triple), Pipe Plug; 1/4", Pipe Plug; 1/4", (3020&), Pipe Plug; (A) (B) (C) 1/4", Pipe Plug; 1/4", Hex, Csk, Pipe Plug; 1/4", (3020l), Pipe Plug; 1/4", (Sub For Epc200683), Pipe Plug; 1/4", (Code 3300 And 3303), Pipe Plug; 1/4", (Use With R36902 Or R40632), Pipe Plug; 1/4" (Sub For Epc200683), Pipe Plug; 1/4" Sub Re168481, Pipe Plug; 1/4", Pipe Plug; 1/4" (24-Speed), Pipe Plug; Use Ty9374, Pipe Plug; 1/4", (Dual) (2 Used Triple), Pipe Plug; 1/4", (Na-D), Pipe Plug; (A: Less Rockshaft) 1/4", Pipe Plug; (Sub For Th111958), Pipe Plug; (A) 1/4", Pipe Plug; 1/4" 1/4" | 1 |
| 19***52 | Cap Screw; 3/8" X 1-1/8", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Cap Screw; 3/8" X 11-1/8", Cap Screw; 9.525 X 28.575 mm (3/8" X 1-1/8"), Cap Screw; 3/8" X 1-1/8", (Rs), Cap Screw; 3/8" X 1-1/8", (Code 5210), Cap Screw; 3/8" X 1-1/8" Inner, Cap Screw; 3/8" X 1-1/8", Use With R128602,This Application, Cap Screw; (D) 3/8" X 1-1/8", Cap Screw; 3/8" X 1-1/8", (Sub For B15612) 7 Roller Pump, Cap Screw; 3/8" X 1-1/8" 3/8"X1", Cap Screw; 3/8" X 1-1/8", (Ru), Cap Screw; 3/8 X 1-1/8", Cap Screw; (E) 3/8" X 1-1/8", Cap Screw; 3/8"X1-1/8", Cap Screw; 3/8" X 1-1/8", Up, Cap Screw; 3/8" X 1-1/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Cap Screw; (A) 3/8" X 1-1/8", Cap Screw; 3/8" X 1-1/8" Rh, Cap Screw; 3/8" X 1-1/8" (Pst), Cap Screw; (B) 3/8"X1-1/8", Cap Screw; 3/8" X 1-1/8", (Sub For B15612 And B15622) 7 Roller Pump Only, Cap Screw; 3/8"X11/8", Cap Screw; 3/8" X 1-1/8", (Inner Holes), Cap Screw; 3/8" X 1-5/8", Cap Screw; (B) 3/8" X 1-1/8", (Sub For B15612), Cap Screw; (A), Cap Screw; 3/8" X 1-1/8" 3/8" X 1-1/8", Cap Screw; 3/8" X 11/8", Cap Screw; 3/8" X 1-1/8", Bolt, Cap Screw; 930, 3/8" X 1-1/8", Cap Screw; 3/8" X 1-1/8", (Sub For B15612 Or B15622) 7 Roller Pump, Cap Screw; (A: For Engine (Cd6068hz001)) 3/8" X 1-1/8", Cap Screw; 3/8"X1-3/8", Cap Screw; 3/8" X 1-1/8", Low, Cap Screw; (B), Cap Screw; 3/8" X 1-1/8" Low, Cap Screw; (A) 3/8"X1-1/8", Cap Screw; 3/8" X 1-1/8", (Alternator To Dash), Cap Screw; 3/8" X 1-1/8", (Upper Holes), Cap Screw; (G) 3/8" X 1-1/8", Cap Screw; (B) 3/8" X 1-1/8", Cap Screw; (E: Use With Re13722, Re41875 And Ty6713) 3/8" X 1-1/8", Cap Screw; 3/8" X 1-1/8", (Sub For B15622) 7 Roller Pump, Cap Screw; 9.525 X 28.575 mm, Cap Screw; 3/8"X1-1/8" (Sub For 19h1731), Cap Screw; 3/8" X 1-1/8", (6401), Cap Screw; (F: Use With Re41875 Or Ty6713) 3/8" X 1-1/8", Cap Screw; 3/8" X 1-1/8" (Sub 19h3483), Cap Screw; 3/8" X 1-1/8", (Or, Rs, Ut), Cap Screw; (C) 3/8" X 1-1/8", Cap Screw; 3/8"X1-1/4", Cap Screw, Cap Screw; 3/8" X 1-1/8" (Radiator Brace Strut), Cap Screw; 3/8" X 1-1/8" 3/8"X1-1/8", Cap Screw; 3/8" X 1-1/8", (Sub 19h3483), Cap Screw; 5/8"X1-1/8", Cap Screw; (B: (Xxxxxx- ) Esn 4650-32***15; 4850-32***46) 3/8" X 1-1/8" | 6 |
| AR***12 | Seal | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38192 Input Housing (Oc-1)
| 11***85 | Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480" | 1 |
| 19***99 | Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2" (Sae 8) (Sub For 19h1847), Cap Screw; (A) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (Less Cab), Cap Screw; 5/8" X 2-1/2", (Sae 8), Cap Screw; 5/8" X 2-1/2", (Code 1404), Cap Screw; 5/8" X 2-1/2", (Code 1403), Cap Screw; 5/8" X 2-1/2" Sae 8, Cap Screw; 5/8" X 2-1/2", Upper Right, (Sub For 19h3244), Cap Screw; 5/8"X2-1/2"Unc, Cap Screw; (E: Code 1402 Flywheel Housing Sae No. 2) 5/8" X 2-1/2" Code 1403, Cap Screw, Cap Screw; Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (4 Used Without Step), Cap Screw; 5/8" X 2-1/2", (Sub 19h3244), Cap Screw; 5/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/2", (Sub For 19h1387) (1405), Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244), Cap Screw; 5/8" X 2-1/2" Rh., Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244, This Application), Cap Screw; 5/8" X 2-1/2" (A), Cap Screw; 5/8" X 2-1/2", Code 1407, Cap Screw; 5/8" X 2-1/2", Code 1406, Cap Screw; 5/8" X 2-1/2" (Sae 8), Cap Screw; 5/8"X2-1/2", Cap Screw; 5/8" X 2-1/2", Upper Right, Cap Screw; 5/8" X 2-1/2" Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; (A) (B) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Low | 12 |
| AR***81 | Seal, Seal | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38193 Input Housing
| 11***85 | Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480" | 1 |
| 19***99 | Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2" (Sae 8) (Sub For 19h1847), Cap Screw; (A) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (Less Cab), Cap Screw; 5/8" X 2-1/2", (Sae 8), Cap Screw; 5/8" X 2-1/2", (Code 1404), Cap Screw; 5/8" X 2-1/2", (Code 1403), Cap Screw; 5/8" X 2-1/2" Sae 8, Cap Screw; 5/8" X 2-1/2", Upper Right, (Sub For 19h3244), Cap Screw; 5/8"X2-1/2"Unc, Cap Screw; (E: Code 1402 Flywheel Housing Sae No. 2) 5/8" X 2-1/2" Code 1403, Cap Screw, Cap Screw; Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (4 Used Without Step), Cap Screw; 5/8" X 2-1/2", (Sub 19h3244), Cap Screw; 5/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/2", (Sub For 19h1387) (1405), Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244), Cap Screw; 5/8" X 2-1/2" Rh., Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244, This Application), Cap Screw; 5/8" X 2-1/2" (A), Cap Screw; 5/8" X 2-1/2", Code 1407, Cap Screw; 5/8" X 2-1/2", Code 1406, Cap Screw; 5/8" X 2-1/2" (Sae 8), Cap Screw; 5/8"X2-1/2", Cap Screw; 5/8" X 2-1/2", Upper Right, Cap Screw; 5/8" X 2-1/2" Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; (A) (B) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Low | 6 |
| AR***24 | Seal; Inner, Seal | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38193 Manual Apply Brakes (Oc-A) (Serial No. 793083- )
| 11***92 | Cotter Pin; 3.200 X 40 mm, (Sub For 11h234), Cotter Pin; 3.200 X 40 mm, Cotter Pin; 3.200 X 40 mm, Cotter Pin; 3.200 X 40 mm, (Power Axle), Cotter Pin; 3x40mm (Sub For 11h224), Cotter Pin; 3.200 X 40 mm, (Power Rear Wheel Drive), Cotter Pin | 2 |
| 14***79 | Nut; M16, M16, Nut; 16 X 1,5 mm, Nut; M16, Nut; M6x1,5, Nut; M16 X 1,5, Nut; M16, (Use With Ar93448), Nut; M16 (Use With Ar93448), Nut; M16x1,5, Nut; M16 (Also Order At107543), Nut; M16 | 2 |
| 19***08 | Cap Screw; 5/8" X 1-5/8", Cap Screw; (A) 5/8"X1-5/8", Cap Screw; 5/8"X1-5/8" | 4 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38194 Inboard Wet Disk Brakes (Oc-2)
| R4***80 | Washer | 3 |
| R4***34 | Piston | 3 |
| R8***88 | O-Ring | 3 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38195 Differential Case To Quill Oil Lines (Oc-3)
| AM***05 | Fitting, Fitting | 1 |
| AR***56 | Oil Line | 1 |
| AR***69 | Oil Line | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38195, Re38196 Differential Bearing Quills (Oc-3)
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 1 |
| AR***59 | Seal | 1 |
| AR***11 | Bearing Housing W/O | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38195,Re38196,Re38198 Differential Lock (Oc-3)
| 19***72 | Cap Screw; 5/8" X 2", Cap Screw; (A) 5/8" X 2", Cap Screw; 5/8" X 2" Hs, Sae 8, (Use With Jd3223, Jd3224, Jd3225 And Jd3226), Cap Screw; 5/8" X 2" Hs, Sae 8 (Use With Jd3223, Jd3224, Jd3225 And Jd3226), Cap Screw; 5/8" X 2" Hs, Sae 8, Cap Screw; 5/8" X 2", Hs, Sae 8, Cap Screw; 5/8" X 2", H.S., Sae 8, Cap Screw; 5/8" X 2" Hs=10.9, Sae 8 (Order (9) 19h2673 And (9) H84374), Cap Screw; 5/8" X 2" Hs=10.9, Sae 8 (Order 19h2673 And H84374), Cap Screw; (A: Use With Jd3223, Jd3224, Jd3225 Or Jd3226 (9-Bolt Hub)) 5/8" X 2", Cap Screw; (A: 92 mm Axle) 5/8" X 2" Hs=10.9, Sae 8, Cap Screw; 5/8" X 2" Hs, Sae 8, (Use With Jd3223, Jd3225 And Jd3226), Cap Screw; 5/8" X 2", (Use With Jd3223 And Jd3225), Cap Screw; 5/8" X 2", Unf-2a (Hs, Sae 8), Cap Screw; 5/8" X 2", (Use With Jd3223, Jd3224, Jd3225 And Jd3226) | 12 |
| 34***85 | Spring Pin; 1/4" X 1-3/4", (Sub For 34h317), Spring Pin; 1/4" X 1-3/4" (A) (B), Spring Pin; 1/4" X 1-3/4" (Hoe Fertilizer Only), Spring Pin; (A), Spring Pin; 1/4" X 1-3/4" (Sub For 34h317), Spring Pin; 1/4" X 1 - 3/4", Spring Pin; 6.350 X 44.450 mm, Spring Pin, Spring Pin; 1/4" X 1-3/4", Spring Pin; (A) 1/4" X 1-3/4", Spring Pin; 1/4"X1-3/4", Spring Pin; 1/4" X 1-3/4" (W/Safety Wire), Spring Pin; 6,35 X 44,45 mm, Spring Pin; 0,25" X 1,75", Spring Pin; 6.350 X 44.450 mm (1/4" X 1-3/4") | 3 |
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 2 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38196 Differential Case To Quill Oil Lines (Oc-3)
| AM***05 | Fitting, Fitting | 1 |
| AR***25 | Oil Line; Return | 1 |
| AR***50 | Fitting | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38197 Differential Bearing Quills (Std, Oc-1)
| JD***18 | Bearing Cone; (A) (B), Bearing Cone, Bearing Cone, Bearing Cone; Outer, Bearing Cone; (Sub For Jd8923) | 1 |
| R1***82 | Cap Screw; (Sub For R46162), Cap Screw | 16 |
| R6***39 | Bearing Housing W/O | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38197 Standard Differential(Oc-1)
| 19***72 | Cap Screw; 5/8" X 2", Cap Screw; (A) 5/8" X 2", Cap Screw; 5/8" X 2" Hs, Sae 8, (Use With Jd3223, Jd3224, Jd3225 And Jd3226), Cap Screw; 5/8" X 2" Hs, Sae 8 (Use With Jd3223, Jd3224, Jd3225 And Jd3226), Cap Screw; 5/8" X 2" Hs, Sae 8, Cap Screw; 5/8" X 2", Hs, Sae 8, Cap Screw; 5/8" X 2", H.S., Sae 8, Cap Screw; 5/8" X 2" Hs=10.9, Sae 8 (Order (9) 19h2673 And (9) H84374), Cap Screw; 5/8" X 2" Hs=10.9, Sae 8 (Order 19h2673 And H84374), Cap Screw; (A: Use With Jd3223, Jd3224, Jd3225 Or Jd3226 (9-Bolt Hub)) 5/8" X 2", Cap Screw; (A: 92 mm Axle) 5/8" X 2" Hs=10.9, Sae 8, Cap Screw; 5/8" X 2" Hs, Sae 8, (Use With Jd3223, Jd3225 And Jd3226), Cap Screw; 5/8" X 2", (Use With Jd3223 And Jd3225), Cap Screw; 5/8" X 2", Unf-2a (Hs, Sae 8), Cap Screw; 5/8" X 2", (Use With Jd3223, Jd3224, Jd3225 And Jd3226) | 12 |
| B1***2R | Snap Ring; (A), Snap Ring; (Sub For F215r), Snap Ring | 4 |
| R1***06 | Thrust Washer; (Sub For R74916) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38198 Differential Bearing Quills
| 4***R | Ball; (A) 6mm (1/4"), Ball; (Sub For Mg11869), Ball; (Model No. 1hd2 And 3hd2), Ball; 6 mm (1/4"), Ball; (A: Not Used When Ar90870 Or Ar90871 Have Been Installed.) 6 mm (1/4"), Ball; (D: (Xxxxxx-) 4050-00***50; 4250-00***80; 4450-01***86), Ball; (No Longer Available), Ball; 6.35mm (1/4") (Use With R44006 Or R49200), Ball; (Sub For 01***18), Ball; (A: For Prodrive), Ball; 6mm (1/4") (Use With R44006 Or R49200), Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.), Ball; (Sub Er028265), Ball; (B: With Ground Speed Power Take-Off) 1/4" (Sub Er028265), Ball; 1/4" (6 mm) Steel, Ball; 1/4, Ball; 6.350 mm Fork Lock, Ball; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 1/4", Ball; (1/4"), Ball; (Sub For M2081t), Ball; 6,350 mm (1/4"), Ball; 6.35mm (1/4"), Ball; (A) 1/4", Ball; (A: Not Used When Ar90870 Or Ar90871 Has Been Installed.) 6mm (1/4"), Ball; (Model No. 1hd3 And 3hd3), Ball; Ils, Ball; 6mm, Ball; Use With Re175013, Ball; (Sub For Ch14955), Ball; (Without Parking Brake), Ball; Hydraulic Motor, Ball; Steel, Ball; (Df105), Ball; (Sub For Ch14955) (Df105), Ball; (A: For Commandcenter), Ball, Ball; (Sub Am882245), Ball; 6mm (1/4") Steel, Ball; (J: (Xxxxxx-) 4050-00***68; 4250-01***90; 4450-02***27), Ball; 6.350mm (1/4"), Ball; (G: (-Xxxxxx) 4650-01***10; 4850-01***38), Ball, Ball; Steel, 6 mm (1/4"), Ball; (Sub For Re164763), Ball; (F: (Xxxxxx-) 4650-00***56; 4850-00***28), Ball; (B) 1/4", Ball; (Sub For Re164762), Ball; 6.350 mm, Ball; (A) 1/4" Grade 500, Ball; 6.350 mm (1/4"), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm (1/4"), Ball; 6,35mm(1/4"), Ball; Steel, 6.4 mm (1/4"), Ball; (Sub For 01***18), Ball; 6mm(1/4"), Ball;.250, Ball; (With Parking Lock), Ball; (A: Included In Ar67781) 6mm (1/4"), Ball; (3015df002), Ball; 6mm (1/4"), Ball; (B: (-Xxxxxx) 4560-00***20; 4760-00***78; 4960-00***05), Ball; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too) 6.350 mm, Ball; (3015df106), Ball; 1/4" (6.35 mm), Ball; 1/4", Steel, Ball; (A), Ball; (H: (Xxxxxx-) 4650-01***11; 4850-01***39), Ball; 6.35 mm (1/4"), Ball; 0.203", Ball; (A: 7220 (01***51-)) | 1 |
| JD***18 | Bearing Cone; (A) (B), Bearing Cone, Bearing Cone, Bearing Cone; Outer, Bearing Cone; (Sub For Jd8923) | 1 |
| R1***82 | Cap Screw; (Sub For R46162), Cap Screw | 16 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38198 Differential Case To Quill Oil Lines
| R2***86 | O-Ring; (B: Saran (Cd) Esn Xxxxxx-) (Sae), O-Ring; 0.414" X 0.072", O-Ring; (Metric), O-Ring; (Use With R41929), O-Ring; (A: (-Xxxxxx) Tsn 4050-00***35; 4250-00***01; 4450-01***49 (Pst)) (C: (-Xxxxxx) Tsn 4050-00***65; 4250-00***05; 4450-00***40 (Qrt)), O-Ring; (A: Not Illustrated), O-Ring; (A: Quad-Range Transmission), O-Ring; (Use With R72054), O-Ring; (B: Dubuque (T0) Esn 70***26-71***39) (Sae), O-Ring; (D: Not Included In Kit) (Use With Re63183), O-Ring; (Use With Ar87537), O-Ring; (Code 3509), O-Ring; Kit Ar98993, O-Ring; (B: Dubuque (T0) Esn 71***40-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; 10.516 X 1.829 mm, (Cd4045) (Sae), O-Ring; Connector To Injection Pump, O-Ring; 10.516 X 1.829 mm (Use With 3594), O-Ring; (B: Dubuque (To) Esn 71***40-) (C: Dubuque (To) Esn -89***59) (D: Saran (Cd) Esn -Xxxxxx) (E: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque(T0) Esn 70***95-73***69) (Sae), O-Ring; (1 Used With Power Take-Off) (2 Used Less Power Take-Off), O-Ring; (B: Dubuque (T0) Esn -71***39) (Sae), O-Ring; (B: Dubuque (T0) Esn 77***67-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Saran (Cd) Esn Xxx-) (C: Torreon (Pe) Esn Xxx-) (Sae), O-Ring, O-Ring; (B: Dubuque (T0) Esn -70***25) (Sae), O-Ring; (A), O-Ring; (Sub For R28785), O-Ring; (Use With R78123), O-Ring; (B: Dubuque (To) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque (T0) Esn -89***59) (C: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (Use With Re12184), O-Ring; 10.516 X 1.829 mm, O-Ring; (B: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (B: Dubuque (T0) Esn -71***39) (Sae), O-Ring; (Kit Ar31946), O-Ring; (Connector To Injection Pump), O-Ring; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (Cd4045) (Sae), O-Ring; (A: Included In Ar67781), O-Ring; (For All Tractors Except Utility), O-Ring; (Use With Re10686), O-Ring; (B: Dubuque (T0) Esn 70***96-89***59) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (Sae), O-Ring; (Less Differential Lock), O-Ring; (B), O-Ring; 10.516 X 1.829 mm (0.414" X 0.072") (Sae), O-Ring; 10.516 X 1.829 mm (0.414" X 0.072"), O-Ring; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; Power Take-Off, O-Ring; (Use With R34814, R36902 Or R40632), O-Ring; Connector To Injection Pump, O-Ring; (Power Take-Off), O-Ring; (Use With Re63183), O-Ring; (B: Dubuque (To) Esn -70***95) (Sae), O-Ring; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxx) (D: Torreon (Pe) Esn -Xxx) (Sae), O-Ring; Kit Ar31946, O-Ring; Code 2107 And 2108, O-Ring; (A: Saran (Cd) Esn Xxxxxx-) (B: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (B: Dubuque (T0) Esn 71***40-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque (T0) Esn 77***67-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; 10.516 X 1.829 mm (0.414" X 0.072") (Cd4045) (Sae), O-Ring; (Use With Re63182 Or Re63183), O-Ring; (B: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; (W/O Mechanical Front Wheel Drive), O-Ring; (A: (-Xxxxxx) Serial No. 8450-00***23; 8650-00***81), O-Ring; 10.516 X 1.829 mm, (W/ 3506, 3567, 3595), O-Ring; (A: Acs), O-Ring; (5 Used Single, 6 Used Dual), O-Ring; (Use With R57382), O-Ring; (Use With R44820) 4520 And 4620 Tractors, O-Ring; (B: Saran (Cd) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (5 Used Single) (6 Used Dual), O-Ring; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) (Sae), O-Ring; Code 2101 And 2103, O-Ring; (B: Dubuque (T0) Esn -70***95) (Sae), O-Ring; (Use With Re13561), O-Ring; Sae, O-Ring; (B: Dubuque (T0) Esn -71***39) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (B: Dubuque (To) Esn 70***96-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) (E: Dubuque (To) Esn -89***59) (Sae), O-Ring; (Sub For R78079), O-Ring; To Injection Pump, O-Ring; (Use With Ar94027), O-Ring; Code 3905, O-Ring, O-Ring; (K) (Sub For Mg510121), O-Ring; (A: Lift Assist), O-Ring; (B: Dubuque (T0) Esn 73***70-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) (Sae), O-Ring; (For R27272), O-Ring; (24-Speed), O-Ring; (1 Used Power Take-Off) (2 Used Less Power Take-Off), O-Ring; (A: See Your Authorized Pump Repair Station For Internal Parts) (B: Dubuque (T0) Esn 77***67-) (C: Saran (Cd) Esn -Xxxxxx) (Sae), O-Ring; Use With Turbocharger, O-Ring; (B: Autotrac), O-Ring; (Use With 3594), O-Ring; (4 Used Less Power Take-Off), O-Ring; (G: Not Used In U.S. And Canada) (H: Also Use On 4050e And 4250e), O-Ring; (B), O-Ring; 10.516 X 1.829 mm, (Use With 3594), O-Ring; 10.516 X 1.829 mm (0.414" X 0.072") (Pe4045) (Sae), O-Ring; (A) (B), O-Ring; (Quad-Range), O-Ring; (Pe4045) (Sae) | 1 |
| R2***72 | Fitting; 1/2" -20unf X 1/2" -20unf, Fitting; (Ord R27094), Fitting, Fitting; (Syncro-Range), Fitting; 3/8", Fitting; (Mechanical Front Wheel Drive), Fitting; (B: Power Shift Transmission), Fitting; Straight, Fitting; (Fuel Line To Fuel Filter), Fitting; (Pst), Fitting; 1/2"-20unf X 1/2"-20unf, Fitting; (Order R27094), Fitting; (Quad-Range Or Syncro-Range), Fitting, Fitting; (1/2" X 1/2"), Fitting; (A) (B) | 1 |
| R5***94 | Washer; (Less Differential Lock), Washer; (C: Diff Lock), Washer; (A: Less Differential Lock), Washer; Tk=0,4mm (Sub For T16911), Washer; (A: Standard) (B: No-Spin), Washer; Aluminum, Washer; (A) (B), Washer; (No Differential Lock), Washer; (With Differential Lock), Washer; (W/O Differential Lock), Washer; (Sub For T16911), Washer; (Less Differential Lock), Washer; Differential Lock Holes, Washer; (A), Washer, Washer, Washer; Tk=0.4mm (Sub For T16911), Washer; 14.605 X 22.098 X 1.524 mm, (Differential Lock Holes), Washer; (B), Washer; (Tractors Less Differential Lock), Washer; Tk= 0.4mm | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re3820,Re38489 Inboard Planetary Final Drive (Oc-2)
| J1***39 | Snap Ring | 1 |
| R1***57 | Washer, Spacer; (Used In Re38201) (Sub For R81567), Spacer; (Sub For R81567) | 1 |
| R1***10 | Gasket | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38200 Standard Differential Case (Oc-1)
| 12***01 | Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036) | 17 |
| 15***97 | Coupling; 9.525 mm, (Sub For Ffsb106932), Coupling; (Sub For Ffsb106932), Coupling; 3/8", Coupling; 9.525 mm (3/8"), Coupling; 3/8", (Front And Rear Axles), Coupling; 9.525 mm (3/8") (Sub For Ffsb106932), Coupling; 3/8" (Sub For Z60018) | 1 |
| 15***66 | Pipe Plug; 3/8" (Floor Plate) (Optional), Pipe Plug; 3/8", (Use With Re31299) (Without Turbocharger), Pipe Plug; 3/8", (Sub For Ch15002), Pipe Plug, Pipe Plug; Sq. Hd., 3/8", Pipe Plug; 3/8", (Use With R89790), Pipe Plug; (A) 3/8", (One Not Used W/ Re20889), Pipe Plug; 3/8" 3/8''-18nptf, Threads With Pre-Applied Sealant, Filets Enduits De Produit D'Etancheite, Mit Dichtmittel, Con Materiale Di Tenuta, Con Sellador, Med Taetningsmedel, Pipe Plug; 3/8", (Sub For R47395), Pipe Plug, Pipe Plug; 3/8" Front, Pipe Plug; 3/8" 3/8"-18 Npt, Pipe Plug; 3/8", Hex Ctsk., 3/4", Pipe Plug; 3/8" (One Not Used With Re20889), Pipe Plug; 3/8" (Use With Ar54556), Pipe Plug; 3/8", (Use With At16133), Pipe Plug; 3/8" 3/8"-18npt (Ord 15h695) With Square Head, Pipe Plug; 3/8" (Dn-03), Pipe Plug; 3/8" (4640, 4840), Pipe Plug; 3/8", Pipe Plug; 3/8" 3/8"-18npt Or Ord 15h695 = With Square Head, Pipe Plug; 3/8" (Bottom Of Intake Manifold, Pipe Plug; 3/8", Pipe Plug; (Use With Re31299) 3/8" (Without Turbocharger), Pipe Plug; (Bottom Of Intake Manifold), Pipe Plug; 9.525 mm (3/8"), Pipe Plug; 3/8", (Sub For Mg508010 Or 15h563), Pipe Plug; 3/8", (Not Used Appl), Pipe Plug; (A) 3/8", (Use 1 With R43851 Or R63285), Pipe Plug; (D) 3/8", Pipe Plug; 3/8", (Use With At206990), Pipe Plug; 3/8", Sq. Hd., Pipe Plug; (A) 3/8", Pipe Plug; 3/8", (Use With R108970), Pipe Plug; 3/8", (Sub For 15h563), Pipe Plug; 3/8" 3/8"-18npt, Pipe Plug; 3/8" (Sub For P45809), Pipe Plug; 3/8" (Front), Pipe Plug; 3/8", (Sub For P45809), Pipe Plug; 3/8", (Use With Ar54556), Pipe Plug; 3/8" 3/8"-18npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Bottom Of Intake Manifold), Pipe Plug; 3/8", Without Turbocharger, Pipe Plug; 3/8", (Front), Pipe Plug; (Use With R108970), Pipe Plug; 3/8" (Not Used Appl), Pipe Plug; 3/8" 3/8"-18 Npt (Use With R113701 And R109887), Pipe Plug; 3/8" (Use With R104592, R134429 And 15h690), Pipe Plug; 3/8", (Use With At210378), Pipe Plug; 3/8" (Use With R89790), Pipe Plug; 3/8", (Less Starting Aid), Pipe Plug; 3/8", (Front), Pipe Plug; 3/8", Hex. Ctsk., Pipe Plug; (A: Threads With Pre-Applied Sealant) 3/8" 3/8''-18 Nptf | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38457 Oscillating Differential Support (Oc-2)
| AR***29 | Seal, Seal | 1 |
| AR***30 | Seal, Seal | 1 |
| JD***59 | Lubrication Fitting; (A: 9550 ( -70***61) 9550sh ( -70***00)), Lubrication Fitting; Rockwell, Lubrication Fitting; (Sub Hk031090), Lubrication Fitting; Lh, Lubrication Fitting; (Sub For Jd7842, This Application), Lubrication Fitting; (Sub For 15h253), Lubrication Fitting; (Sub F66200) (Not Shown), Lubrication Fitting; (A), Lubrication Fitting; 1/8", (Sub For Jd7798), Lubrication Fitting; (A: Rockwell) 1/8", Lubrication Fitting; (C) 1/8" Straight, Lubrication Fitting; Self-Tapping, Lubrication Fitting; (A) 1/8" Straight, Lubrication Fitting; (B) 1/8" Straight, Lubrication Fitting; (A: For 9650 ( -70***64) & 9750 ( -70***79)), Lubrication Fitting; (Use With R62261), Lubrication Fitting; Straight, Rear Bearing Only, Lubrication Fitting; (Sub For B11182), Lubrication Fitting; (A: 9550 (70***62- ) 9550sh (70***01- )), Lubrication Fitting; 1/8", Grease, Lubrication Fitting; 1/8", (Barrel), Lubrication Fitting; (Sub For 0370005335), Lubrication Fitting; 1/8" (Sub For 15h638 Appl), Lubrication Fitting; 1/4", (Sub For Jd7798), Lubrication Fitting; (Sub For At252686), Lubrication Fitting; (B: Use With Rear Bearing), Lubrication Fitting; (A: For 9650 (69***96- ) & 9750 (69***23- )), Lubrication Fitting; (Sub For Jd7798), Lubrication Fitting; (Sub For Jd7798, This Application), Lubrication Fitting; Grease, Straight, 1/8", Lubrication Fitting; 1/8 St, Lubrication Fitting; (For Cylinder Rod With Square Bushing), Lubrication Fitting; 1/8", (Sub For Mg80710), Lubrication Fitting; Straight (B), Lubrication Fitting; (B) (C), Lubrication Fitting; 1/8", (714a, 716a), Lubrication Fitting; 1/8", Straight, Lubrication Fitting; 1/8-27 (Straight), Lubrication Fitting; (Plain Bearing), Lubrication Fitting; (A) 1/8", Lubrication Fitting; (Sub For Jd7759), Lubrication Fitting; (B: For Cylinder Rod With Square Bushing), Lubrication Fitting; (A: For 9650 ( -69***95) & 9750 ( -69***22)), Lubrication Fitting; (D), Lubrication Fitting; (Sub For Jd7848) Rice, Lubrication Fitting; Straight, 1/8" (Special), Lubrication Fitting; (D: 8520 (02***33- )), Lubrication Fitting; 1/8", Straight, Grease, Lubrication Fitting; (A: For 9650 (70***65- ) & 9750 (70***80- )), Lubrication Fitting; (A) (B) 1/8" Straight, Lubrication Fitting; (B: 5415 Sn -00***77, 5615 Sn -00***50, 5715 Sn -00***45), Lubrication Fitting; (Use With Ar95972), Lubrication Fitting; Rear Bearing Only, Lubrication Fitting; 1/4", Lubrication Fitting; (Front Axle To Frame), Lubrication Fitting; Incld In 3, Lubrication Fitting; 3.18mm (1/8"), Lubrication Fitting; Straight, Lubrication Fitting; (F) (Plain Bearing), Lubrication Fitting; (3mm), Lubrication Fitting; (Sub F66200), Lubrication Fitting; (Sub For Th100364), Lubrication Fitting; 1/8" (Sub For Jd7798), Lubrication Fitting; Straight 1/8", Lubrication Fitting; (Use With At73775), Lubrication Fitting; (C) (D), Lubrication Fitting; ,1/8" Straight, Lubrication Fitting; (Lift Cylinder), Lubrication Fitting; 1/8 X 27 (Straight), Lubrication Fitting; C, Lubrication Fitting; Incld In 2,5, Lubrication Fitting; (B: Use With Rear Bearing) Straight, Lubrication Fitting; A, Lubrication Fitting; (Use With R70589), Lubrication Fitting; 1/8" (Use With R62261), Lubrication Fitting; Grease Straight, 1/8", Lubrication Fitting; 1/8"-Npt, Lubrication Fitting; L H, Lubrication Fitting; L.H., Lubrication Fitting; 1/8 Pipe, Lubrication Fitting; Straight (For Rear Bearing Only), Lubrication Fitting; (Sub For Jd7842, This Appl), Lubrication Fitting; 1/8", Grease, Straight, Lubrication Fitting; 1/8" (Rod), Lubrication Fitting; 1/8", Lubrication Fitting; 1/8" - Straight, Lubrication Fitting; 1/4" Straight, Lubrication Fitting; (Sub For Jd7798) 1/8" Straight, Lubrication Fitting; 1/8" (Sub For 15h253), Lubrication Fitting; Incld In 15, Lubrication Fitting; Incld In 26, Lubrication Fitting; 1/8", Straight, (Sub For Mg80710), Lubrication Fitting; 1/8" Straight, Lubrication Fitting; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Lubrication Fitting; Male, Lubrication Fitting; (Sub For Jd7847, This Application), Lubrication Fitting; Fitting, Grease, Straight, 1/8, Lubrication Fitting; (B: 5415 Sn -00***77, 5715 Sn -00***45), Lubrication Fitting; Rh, Lubrication Fitting; 1/8" (Use With Ar95972), Lubrication Fitting; 1/8" (300), Lubrication Fitting; (Sub For Jd7798 Appl), Lubrication Fitting; (As Required), Lubrication Fitting; (B), Lubrication Fitting; (Use With Re273958), Lubrication Fitting; (Sub For F66200), Lubrication Fitting; (Rear Bearing Only), Lubrication Fitting; Incld In 7, 8, Lubrication Fitting; (B: 5415 Sn 00***78-Xxxxxx , 5615 Sn 00***51-Xxxxxx , 5715 Sn 00***46-Xxxxxx), Lubrication Fitting; Incld In 1, Lubrication Fitting; (A), (B), Lubrication Fitting; 1/8-In., Lubrication Fitting; (Sub Jd7798), Lubrication Fitting; (Metric), Lubrication Fitting; Straight, 1/4", Lubrication Fitting, Lubrication Fitting; (3.18mm), Lubrication Fitting; Straight, 1/8", Lubrication Fitting; 1/8 In. Straight, Lubrication Fitting; (210), Lubrication Fitting; (For Rear Bearing Only), Lubrication Fitting; (Sub For Jd7798) (Use With B14880) 1/8" Straight, Lubrication Fitting; (A: Incld In Cb11479899 Linkage), Lubrication Fitting; (B: 5415 Sn 00***78-Xxxxxx , 5715 Sn 00***46-Xxxxxx), Lubrication Fitting; (Use With Re37749), Lubrication Fitting; 1/8 In Straight, Lubrication Fitting; (A) (B) Straight, 1/8", Lubrication Fitting, Lubrication Fitting; (310), Lubrication Fitting; M8, Lubrication Fitting; (C: ( -Xxxxxx) 4755-01***20; 4955-01***12) | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38461 Inboard Planetary Final Drive
| R1***43 | Washer; (Use With R262426 And R262427), Washer; 17 X 30 X 3 mm, Washer, Washer; (Sub For R72390), Washer; (A: Quantity For One Axle), Washer; (A: European Version), Washer; Use With R109481 And R109480, Washer; (Sub For R73290), Washer; (Use With R109481 And R109480), Washer; 37/64" X 1-3/16" X 0.062", Washer, Washer; (Use With R262427 And R262426), Washer; Use With R262427 And R262426 | 18 |
| R5***80 | Dowel Pin; (Sub For R26015 Or T25317), Dowel Pin; (A: Quantity For One Axle), Dowel Pin; (Sub T25317), Dowel Pin, Dowel Pin; (Sub For T25317 Or R26015), Dowel Pin; (A), Dowel Pin; (Sub For T25317), Dowel Pin; (Use With Re522549), Dowel Pin; (Not Required), Dowel Pin; (Locating), Large Plate; Cover - Instrument Panel, Upper, Dowel Pin; (A), Dowel Pin, Dowel Pin; (D: Axle Housing To Case) | 2 |
| R6***37 | Shim, Shim; 0.254mm(0.010") | 1 |
John Deere : 1200 - Axle : Axle Teammate I 1800 Axle : Re38488, Re38458 Inboard Wet Disk Brakes (Oc-B)
| R8***70 | Brake Disk | 1 |
| RE***98 | Plate; Backing (Sub Re46342 And (3) Re156181 ) (Marked R81568) | 1 |
Need a specific 1200 - AXLE part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.
Post a parts request and compare supplier quotes.