Jcb VMS55(Attachments Division - Pedestrian)
Maintenance schedule, common problems & OEM parts breakdown
The JCB VMS55 is a pedestrian-operated vibration shaft attachment within the JCB Light Equipment and Attachments Division. It is designed for ground compaction and trench backfilling tasks, utilizing hydraulic power from a carrier machine rather than possessing an independent engine. The unit features a unique patented active hydraulic suspension system that dispenses with traditional springs and bushes to deliver single-axis vibration, reducing hand-arm vibration levels for the operator. As a light equipment attachment, it does not have a standalone operating weight or production year lineage in the same manner as self-propelled machinery; its specifications are defined by its compatibility with JCB carrier hydraulic flows and pressures.
The VMS55 represents JCB's engineering focus on operator safety and efficiency in the pedestrian compaction segment. Its significance in the used and parts market lies in the specialized active hydraulic suspension technology, which distinguishes it from standard spring-loaded compactors. The machine's value is tied to the durability of its vibration shaft and the integrity of its hydraulic suspension components. While it does not have a direct predecessor or successor model designation in the self-propelled sense, it is part of the broader JCB Light Equipment range that includes powerpacks and handheld breakers, serving as a specialized tool for utility and municipal contractors requiring precise, low-vibration compaction.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb VMS55(Attachments Division - Pedestrian) specifications
Engine
| Engine Model | Not documented for this exact serial range — verify with your dealer |
| Gross/Net Power | Not documented for this exact serial range — verify with your dealer |
| Displacement | Not documented for this exact serial range — verify with your dealer |
| Cylinders | Not documented for this exact serial range — verify with your dealer |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | Not documented for this exact serial range — verify with your dealer |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | Not documented for this exact serial range — verify with your dealer |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | Not documented for this exact serial range — verify with your dealer |
| Wheelbase/Track Gauge | Not documented for this exact serial range — verify with your dealer |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speeds | Not documented for this exact serial range — verify with your dealer |
| Class-Relevant Performance | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb VMS55(Attachments Division - Pedestrian) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the VMS55(Attachments Division - Pedestrian) beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic, axle, and final drive systems to establish a baseline. Inspect the hydraulic return filter magnet for metallic debris before disposal. Monitor the vibration shaft's hydraulic suspension for leaks or pressure loss, as the active system relies on clean fluid to dampen single-axis vibration. Check the carrier machine's hydraulic flow and pressure specifications to ensure they match the VMS55 requirements, preventing premature wear on the shaft bearings and seals.
Corrective & Common Repairs
Address hydraulic hose chafing and pinhole seepage at the kingpost and boom connections during daily checks. Replace worn GET teeth and cutting edges on the compaction plate to maintain effective ground contact. Inspect the active hydraulic suspension components for damage, as failure leads to excessive hand-arm vibration. Check the vibration shaft bearings for play or noise, which indicates the need for replacement before catastrophic failure. Ensure all grease points on the pivot pins and bushings are lubricated to prevent metal-on-metal wear.
Overhaul & Rebuild Points
At the 2000-hour interval, inspect the structural integrity of the vibration shaft and chassis for cracking or unauthorized welding. Measure the swing ring play if applicable to the carrier interface, using a dial indicator for radial and axial checks. Service the hydraulic system by draining and cleaning the tank, then refilling with JCB-spec oil. Check the injector spray pattern via diagnostic tool if the carrier engine is involved in the power unit. Replace the cabin HVAC filter and service the A/C pressure if the carrier machine includes operator comfort features.
Seasonal & Environment Servicing
In severe conditions such as heat, dust, or water, shorten service intervals and add extra inspections. Check the air filter primary and clean or replace it per the restriction indicator to prevent engine contamination. Inspect the cooling system for silicate separation in the expansion bottle, which indicates the need for coolant change. Verify the battery electrolyte levels in non-sealed units and clean terminals. Ensure the hydraulic fluid is at the correct level in the sight gauge to maintain the active suspension's damping performance in varying temperatures.
VMS55(Attachments Division - Pedestrian) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 11055026 | Plate, Filter Support | Scheduled service item | Check fitment → |
| 91107004 | Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
VMS55(Attachments Division - Pedestrian) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Clogged fuel filters, failing lift pump, or restricted fuel line. | Check fuel filter condition and fuel supply pressure. |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor, shorted wiring, or low coolant level. | Inspect sensor connector for corrosion and verify coolant level. |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor, low oil level, or sensor wiring fault. | Verify actual oil pressure with a mechanical gauge and check oil level. |
| P2047 | Reductant (DEF/AdBlue) injector circuit open | SCR system fault, open injector circuit, or defective dosing unit. | Inspect SCR injector wiring harness and connections for damage. |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus network fault, loose connector, or poor ground connection. | Check battery voltage and inspect CAN bus connectors for corrosion. |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Failed crank sensor, damaged tone ring, or open wiring circuit. | Inspect crank sensor wiring and connector for physical damage. |
| P0102 | Mass Air Flow (MAF) Sensor Low Voltage Fault | Dirty or faulty MAF sensor, intake air leak, or wiring issue. | Clean MAF sensor and inspect intake ducting for leaks. |
| P0321-87 | CAN bus message error for engine speed from engine ECU | Communication error between ECM and display or other modules. | Check CAN bus wiring integrity and connector seating. |
| P029B | Injector drift fault detection on Injector 2 | Fuel injector 2 mechanical drift or electrical fault. | Test injector 2 resistance and perform cylinder balance test. |
| P0336 | Torque Reduction Crank Sensor Fault (Signal Fault) | Intermittent crank signal or sensor alignment issue. | Inspect crank sensor gap and wiring for intermittent shorts. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
VMS55(Attachments Division - Pedestrian) attachments & work tools
Vibratory Rammers
The VMS55 is identified as a vibratory rammer within the JCB Light Equipment range. The machine utilizes a vibration shaft, with part number the OEM part reference designated for the pulley assembly associated with the vibrator unit.
Hydraulic Powerpacks
JCB light equipment attachments include hydraulic powerpacks noted for efficiency and portability. These units feature a unique suction circuit, power-on-demand system, and adjustable hydraulic flow to support various work tools.
Handheld Breakers
The range includes handheld breakers designed for demolition work. Specific configurations, such as the HM25LV breaker used with the Beaver Powerpack, utilize active hydraulic suspension to dispense with traditional springs and bushes, reducing hand-arm vibration.
Earth Drills
JCB offers hand-held earth drills capable of drilling holes up to 305mm in diameter. These tools feature hydraulic drive, portability, and safety mechanisms including an automatic return-to-neutral controller.
Pumps
The light equipment category includes submersible trash pumps and clear water pumps. These units are characterized by self-priming capabilities, run-dry protection, and durability for handling solids.
All VMS55(Attachments Division - Pedestrian) assemblies by section
Every catalogued assembly group for the Jcb VMS55(Attachments Division - Pedestrian). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-1-1 Transport Trailer
| 99***82 | Trailer, Transport, Vms55 | 1 |
B Bodywork
B1-10-1 Scraper Blades
| 11***34 | Blade, Scraper Assembly | 2 |
| 90***63 | Screw, M8 X 20 | 4 |
| 90***04 | Nut, Nyloc M8 | 4 |
B1-1-1 Frame & Side Panels
| 11***13 | Cover, Side | 1 |
| 11***28 | Plate, Side | 1 |
| 11***00 | Frame | 1 |
B1-2-1 Water Tank
| 11***14 | Tank, Water | 1 |
| 90***65 | Screw, M8x25 | 4 |
| 91***04 | Washer, M8 | 4 |
B1-1-2 Handle & Components
| 11***17 | Handle, . | 1 |
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 90***40 | Bolt, M10x70 | 2 |
B5-1-1 Machine Decals
| 93***35 | Label, Warning, Ear Def & Noise | 1 |
| 93***36 | Label, Forward / Reverse, & Throttle | 1 |
| 93***37 | Decal, Lifting, Point | 1 |
D Controls - Machine Engine &, Steering
D1-1-1 Forward / Reverse, Lever
| 11***24 | Lever, For / Rev | 1 |
| 11***25 | Spacer | 1 |
| 11***08 | Control Rod | 1 |
D2-1-1 Throttle, & Components
| 13***0D | Bolt, M6x40 | 1 |
| 13***3D | Nut, Lock M5 | 2 |
| 13***1Z | Nut | 1 |
E Hydraulics & Air, Including, Water
E2-1-1 Hydraulic Pump
| 11***02 | Plate, Pump Backing | 1 |
| 11***03 | Pulley, Pump | 1 |
| 11***04 | Lever, Swash | 1 |
E3-1-1 Hydraulic Filter
| 11***12 | Adapter, Suction | 1 |
| 11***26 | Plate, Filter Support | 1 |
| 11***33 | Adapter, Filler Extension | 1 |
E10-1-1 Pressure Sprinkling, (Water)
| 11***35 | Spray, Sprinkler Bar | 1 |
| 90***07 | Clip, Hose P | 2 |
| 90***01 | Clip, Hose | 4 |
E10-10-10 Circuit, Hydraulic, Hoses And Connectors
| 91***02 | Seal, 1/2 Bsp | 2 |
| 91***50 | Adapter, M/M 1/2 Bsp/1/4 | 2 |
| 91***96 | Elbow, Adj 7/16 | 1 |
F Axles, Wheels & Transmission
F1-1-1 Drum
| 11***02 | Drum, Vibrator Roll | 1 |
| 11***07 | Hub, Drive | 1 |
| 11***08 | Sprocket, Drive | 1 |
F1-2-1 Vibration, Shaft
| 11***01 | Shaft, Vibrator | 1 |
| 11***03 | Housing, Bearing | 2 |
| 11***04 | Spacer, Outer | 1 |
F5-1-1 Transmission Motor, & Belts
| 11***15 | Plate, Motor Mounting | 1 |
| 11***01 | Plate, Bearing Mounting | 1 |
| 11***06 | Driveshaft | 1 |
M Engine
M1-1-1 Refer, To, Honda Dealer
| 11***36 | Engine, Gx 160 Qx | 1 |
| 13***9D | Bolt | 4 |
| 90***20 | Bolt, M8 X 35 | 4 |
M8-2-1 Fan Cover, Gx160
| 02***13 | Bolt, Flange 6mm | 1 |
| 02***09 | Cover, Fan | 1 |
| 02***10 | Cover, Fan From S/N 17***57 | 1 |
M9-1-1 Flywheel Assembly, Gx160
| 02***16 | Key, . | 1 |
| 02***17 | Fan, . | 1 |
| 02***18 | Pulley, Starter | 1 |
M10-2-1 Dipstick, Oil Filler, Gx160
| 02***61 | Dipstick, . | 1 |
| 02***62 | Cap, Oil Filler | 1 |
| 02***63 | Seal, . | 2 |
N Tools
N1-1-1 Sirometer
| 89***45 | Tool, Sirometer (Vib Testi | 1 |
Frequently asked questions
What engine does the JCB VMS55 use?
The JCB VMS55 is a pedestrian-operated attachment and does not have its own engine. It is powered by the hydraulic system of a compatible carrier machine, such as a JCB backhoe loader or excavator.
What is the operating weight of the JCB VMS55?
Specific operating weight data for the JCB VMS55 attachment is not documented in the provided sources. As an attachment, its weight is secondary to its hydraulic flow and pressure requirements for proper operation.
What model replaced the JCB VMS55?
The provided sources do not identify a specific successor model that replaced the JCB VMS55. It remains part of the JCB Light Equipment and Attachments Division range, often referenced alongside other specialized tools like the Beaver Powerpack and handheld breakers.
What VMS55(Attachments Division - Pedestrian) owners discuss
What are the common powertrain and hydraulic behaviors associated with JCB light equipment shuttle systems?
What are typical undercarriage or wear patterns for JCB skid steer and compact track loaders?
What engine quirks are reported for JCB diesel engines, specifically the 444 series?
What are common electrical or sensor issues in JCB light equipment?
What specific items should be checked when buying a used JCB light equipment?
What are the recommended fluid specifications for JCB hydraulic and transmission systems?
How is the manufacturing year determined for modern JCB machines?
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb VMS55(Attachments Division - Pedestrian). Related factory variants of the same model family:
Need a specific VMS55(Attachments Division - Pedestrian) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.