JCBagriculturalwheeled loaders
Jcb TM310
Maintenance schedule, common problems & OEM parts breakdown
The JCB TM310 is a pivot-steer telehandler manufactured from 2005 to 2011, bridging the gap between telehandlers and entry-level wheeled loaders. It weighs 8,000 kg (17,637 lb) and features a 3.1 t lift capacity at 5.2 m height. The standard TM310 uses a 130 hp JCB Dieselmax engine, while the TM310S variant delivers 145 hp. It succeeded the TM300 series and was followed by the TM320. Configurations include the standard TM310, the higher-output TM310S, and the TM310WM waste specification model.
The TM310 generation introduced a variable displacement swash-plate hydraulic pump (140 L/min) replacing the previous gear pump, a lowered cab floor for improved headroom, and a solid cast rear counterweight that consolidated fuel and hydraulic tanks. These changes improved cycle times and maintenance access. The machine remains relevant in the used market due to its robust Dieselmax engine, 500-hour oil intervals, and versatility in agricultural and municipal applications.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb TM310 specifications
Engine
| Model | JCB Dieselmax |
| Configuration | TM310: Naturally aspirated or Turbocharged/charge cooled (Tier 2); TM310S: Turbocharged and after-cooled (Tier 3) |
| Displacement | 4.4 litres |
| Cylinders | 4 |
| Gross Power (TM310) | 97 kW (130 hp) |
| Gross Power (TM310S) | 108 kW (145 hp) |
| Emissions Tier | Tier 2 (TM310); Tier 3 (TM310S) |
Weights
| Operating Weight | 8,000 kg (17,637 lb) |
Dimensions
| Transport Length | 6.322 m (20 ft 9 in) |
| Transport Width (over tyres) | 2.35 m (7 ft 9 in) |
| Transport Height | 2.695 m (8 ft 10 in) |
| Outside Turn Radius (over tyres) | 4.382 m (14 ft 5 in) |
| Articulation Angle | ± 43° |
| Departure Angle | 28° |
Performance
| Travel Speed | 40 km/h (25 mph) |
| Max Lift Height | 5.2 m (17 ft 1 in) |
| Max Payload | 3,100 kg (6,832 lb) |
| Hydraulic Flow | 140 litres/min |
| Transmission | 6F x 4R powershift with torque converter and TorqueLock |
Service capacities (summary)
| Fuel Tank | 160 litres (42.3 gal) |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
TM310 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Fuel tank | 160 L (42.3 US gal) | Standard diesel fuel |
| Engine crankcase (with filter) | Not documented for this exact serial range — verify with your dealer | JCB Engine Oil Max (meets API CI-4 Plus & JCB Standard 00080) |
| Cooling system | Not documented for this exact serial range — verify with your dealer | JCB Coolant Ready to Use (protection down to -37 °C) |
| Transmission | Not documented for this exact serial range — verify with your dealer | JCB Transmission Oil+ |
| Hydraulic system and tank | Not documented for this exact serial range — verify with your dealer | JCB HVI Hydraulic Oil (ISO VG 46) |
| Front axle oil (including hubs) | Not documented for this exact serial range — verify with your dealer | JCB Rear Axle Oil |
| Rear axle oil (including hubs and drop box) | Not documented for this exact serial range — verify with your dealer | JCB Rear Axle Oil |
| Grease | N/A | JCB Grease Special or JCB Grease AP 2 |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb TM310 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the TM310 beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid samples at the 500-hour interval are critical for the TM310’s Dieselmax engine and hydraulic system. Monitor engine oil for silicate separation, which causes brown sludge in the expansion bottle if coolant intervals are missed. Check hydraulic oil for viscosity changes and metallic debris on the return filter magnet. Transmission and axle oils should be sampled to detect gear wear early. The 500-hour oil change interval relies on clean fuel; replace primary and secondary fuel filters to protect the common-rail injectors from contamination.
Corrective & Common Repairs
The TM310’s six-speed powershift gearbox with Torquelock in 5th and 6th gears is prone to switch sensitivity issues; verify the direction control rocker switch on the joystick for proper detent force. The variable displacement hydraulic pump requires inspection of the swash plate actuator for sluggish response. Check the large square-profiled bonnet hinges and the praying mantis-style mirrors for structural fatigue. Inspect the oil-immersed multi-disc service brakes on the front axle for wear and proper self-adjustment function.
Overhaul & Rebuild Points
At 2,000 hours, measure swing ring play radially and axially using dial indicators to assess bearing wear. Inspect the boom and arm for unauthorized welding or stress cracks at high-load pivot points. Check the torque converter and transmission filter for metal shavings indicating internal gear wear. Inspect the turbocharger boots for oil leaks and the wastegate for proper function. Verify injector spray patterns using the JCB ServiceMaster tool to identify failing nozzles before they damage the cylinder head.
Seasonal & Environment Servicing
In cold climates, verify the coolant’s silicate concentration to prevent freezing and corrosion. Check the air conditioning condenser’s swing-out mechanism for debris buildup, as the stacked radiator design requires clear airflow. In dusty environments, monitor the air filter restriction indicator closely and clean the cooling pack regularly. Inspect the cab floor seal and lowered seat base mounting for water ingress. Ensure the hydraulic oil is suitable for the operating temperature range to maintain pump efficiency.
TM310 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925949 | Filter, Fuel Lift Pump, Assembly, 5 Micron | Fuel system service | Check fitment → |
| 267/85429 | G.A, Filter & Air Intake | Air intake service | Check fitment → |
| 32/926071 | Element, Air Filter, Main | Air intake service | Check fitment → |
| 32/926072 | Element, Air Filter, Safety | Air intake service | Check fitment → |
| 320/20172 | Alternator, 14v/95amp, Un-Filtered | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
TM310 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E083 | Injector circuit fault for Injector 1 (dodgy current/open circuit) | Faulty injector, loose connector under top cover, or damaged wiring harness | Inspect wiring harness and connectors around the engine area; check for loose plugs under the top cover |
| E719 | Engine misfire detected | Faulty fuel injector or ignition timing issue | Use JCB ServiceMaster 2 diagnostic tool to identify specific cylinder; replace faulty injector if confirmed |
| T310 | CAN data unavailable - engine percent load at current speed | Communication fault between engine ECU and transmission ECU | Check CAN bus wiring between engine and transmission controllers for damage or loose connections |
| T312 | CAN data unavailable - engine speed; TCLU inoperative | Loss of engine speed data signal to transmission controller | Inspect wiring and plugs around the engine area; verify engine sensor functionality with laptop diagnostic tool |
| E001 | EMS electrical fault (Open circuit in sensor/solenoid) | Open circuit in related sensor, solenoid, or electrical output | Check wiring, connectors, power supply, and ground for the specific component indicated by the service manual |
| E002 | EMS electrical fault (Short circuit to battery) | Short circuit to battery in sensor or solenoid circuit | Inspect wiring harness for chafing or damage; check connector pins for shorting |
| E004 | EMS electrical fault (Short circuit to ground) | Short circuit to ground in sensor or solenoid circuit | Inspect wiring harness for chafing or damage; check connector pins for grounding |
| E008 | EMS electrical fault (Sensor signal out of range) | Faulty sensor or wiring issue causing signal deviation | Verify sensor operation and wiring integrity using JCB ServiceMaster 2 diagnostic tool |
| E009 | EMS electrical fault (Sensor signal intermittent) | Intermittent connection or failing sensor | Check wiring connectors for corrosion or looseness; monitor signal with diagnostic tool under load |
| E010 | EMS electrical fault (Sensor signal low voltage) | Low voltage signal from sensor due to power loss or sensor failure | Check power supply and ground to the sensor; test sensor resistance and output |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
TM310 attachments & work tools
Standard Shovel Bucket
The basic model includes a standard shovel bucket with teeth. Bucket capacity is 1 cubic meter. The machine has a maximum payload of 3100 kg (6832 lb) and a maximum lift height of 5200 mm (17 ft 1 in).
Quick Hitch Systems
Both hydraulic and mechanical quick hitch options are available for the TM310 series. The operator's manual warns to use only JCB approved attachments to prevent accidents from operating the boom while traveling.
Pallet Forks
Pallet forks are a standard attachment option for clamp and bale work. The machine handles clamping grass with forks without strain due to the 145 hp engine and six-speed powershift gearbox.
Hydraulic Coupler/Adapter
An adapter kit exists to convert the factory Qfit quick attach to accept Euro/Global style attachments. This allows the TM310 to use third-party quick-attach tools with a trigger-lock face plate.
Hydraulic Configuration
The TM310S uses a variable displacement swash-plate pump delivering 140 litres/min, replacing the 120 litres/min gear pump found in earlier models. This provides greater flow, faster cycle times, and an adjustable auxiliary oil supply for powered attachments.
Loader End Variants
Loader end types are identified by code: O for HT (High Tonnage), Z for ZX, and S for Farmmaster. The TM310WM is a waste specification loading shovel variant included in the service manual scope.
All TM310 assemblies by section
Every catalogued assembly group for the Jcb TM310. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-1-1 Bucket, 1.0 Cu.M., With Teeth
| 13***01 | Nut | 16 |
| 33***88 | Tooth, Bucket | 8 |
| 53***05 | Tooth | 8 |
A1-10-1 Tooth Guard
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 4 |
A1-3-1 Bucket, 1.0 Cu.M, With Toeplate
| 33***50 | Toeplate, 2286mm Wide With Holes | 1 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
| 54***00 | Shovel, 1.0 M3 | 1 |
A1-2-1 Bucket, 1.0 Cu.M, With Bolt On Toeplate
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A1-4-1 Bucket, 1.0 Cu.M, With Bolt On Toeplate
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
| 33***41 | Shovel, Assembly, 2290mm Wide, 1.0cu.M | 1 |
A3-5-1 Quickhitch, Q/Fit Carriage
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***5D | Setscrew, M8x20 | 3 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
A3-12-1 Hydraulic Tow Hitch
| 14***6Z | Washer, M6 | 2 |
| 26***01 | Hitch, Inner Tube | 1 |
| 26***05 | Handle, Toggle | 2 |
A3-1-1 Quickhitch, Pin & Cone
| 13***9D | Setscrew, M8x35 | 2 |
| 13***8D | Setscrew, M10 X 30 | 3 |
| 13***1D | Bolt, M20x45, Dacromet | 1 |
A3-15-1 Rockinger Hitch
| 13***0D | Bolt | 2 |
| 13***2D | Bolt, M24 X120mm Long | 2 |
| 13***3D | Nut, Lock M24 | 2 |
A3-14-1 Hydraulic Tow Hitch, Installation
| 13***9D | Setscrew, M8x35 | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 8 |
| 13***9D | Bolt, Special M8x90 | 2 |
A3-2-1 Quickhitch, Isolation Kit, Pin & Cone
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***1D | Screw, Set M6x12 | 3 |
| 13***3D | Setscrew | 5 |
A3-9-1 Fork Retention Kit
| 54***01 | Link, Fork Retaining | 2 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-4-1 Quickhitch, Isolation Kit, 'Q' Fit
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***1D | Screw, Set M6x12 | 3 |
| 13***3D | Setscrew | 5 |
A3-10-1 Carriage, Fork, Pin & Cone
| 33***86 | Carriage, Wa | 1 |
| 54***00 | Fork, Arm 100wx50tx1067l, Class 3b, Fork, Arm 100wx50tx1067l, Class 3b; Not Fitted On Usa Machines. All Forks Are Supplied In Matched Pairs Only And Cannot Be Replaced Individually | 1 |
| 54***00 | Fork, Industrial, 125w X 50t X 1200mm | 1 |
A3-8-1 Carriage, Fork, Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
| 54***00 | Fork, Industrial, 100w X 45t X 1200l | 1 |
A3-7-1 Pallet Fork
| 54***38 | Handle, Locking (Metric) | 2 |
| 54***21 | Fork, 100w X 40t X 1067l | 1 |
| 54***26 | Fork, 125w X 40t X 1200l | 1 |
A3-5-2 Quickhitch, Q/Fit Carriage
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***0D | Setscrew | 1 |
B Bodywork, Cab, Loader End
B1-16-1 Steps
| 13***0D | Setscrew, M12 X 40 | 16 |
| 13***3D | Nut, M12 | 8 |
| 14***5D | Washer | 4 |
B1-22-1 Hitch Recovery, Manual
| 13***8D | Setscrew, M8 X 30mm | 8 |
| 13***7D | Bolt, M24 X 75 | 2 |
| 13***3D | Nut, Lock M24 | 2 |
B1-10-1 Guard, Axle
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***7D | Setscrew, M8x25 | 3 |
| 14***7D | Washer, M8 Plain | 5 |
B1-9-1 Chassis Front & Rear
| 13***5D | Setscrew, M8x20 | 3 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***2D | Setscrew, M8 X 50 | 2 |
B1-11-1 Articulation Stay
| 12***00 | Strap | 2 |
| 12***73 | Fastener, Anti-Luce | 2 |
| 13***9D | Setscrew, M8x35 | 4 |
B1-20-1 Exterior Mouldings
| 33***45 | Moulding, Front Valance; Superseded To 33***39 D.Jackson 24/05/07, San23706 (Pi A00016 Am) Improve Fit | 1 |
| 33***39 | Moulding, Front Valance | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 8 |
B1-23-5 Fenders, Front, Steel, And Wheel Chock, German Option
| 13***7D | Screw, M6 X 25mm | 6 |
| 13***7D | Setscrew, M8x25 | 16 |
| 13***8D | Setscrew, M8 X 30mm | 8 |
B1-15-1 Fenders, Front, Plastic, And Light Guards
| 13***3D | Screw, M5x16 | 8 |
| 13***7D | Setscrew, M8x25 | 16 |
| 13***0D | Setscrew, M10 X 40mm | 8 |
B1-22-2 Hitch Recovery, Manual
| 13***0D | Setscrew, M8 X 40mm Long | 8 |
| 13***7D | Bolt, M24 X 75 | 2 |
| 13***3D | Nut, Lock M24 | 2 |
B1-23-6 Fenders, Front, Steel, And Wheel Chock, German Option
| 13***7D | Screw, M6 X 25mm | 6 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***7D | Setscrew, M10 X 25mm Long | 8 |
B1-23-3 Fenders, Front, Plastic, 550mm Wide, And Wheel Chock, German Option
| 13***5D | Setscrew, M8x20 | 8 |
| 13***8D | Setscrew, M10 X 30 | 8 |
| 13***3D | Bolt, M10 X 55mm | 8 |
B1-18-1 Sound Proofing, Engine Cover
| 33***55 | Panel, Soundproofing, Upper Centre; Superseded To 33***35 On San100739, D.Jackson 15/05/09 Pi R06019aa | 1 |
| 33***57 | Panel, Soundproofing, Lh Upper; Superseded To 33***50 On San100739, D.Jackson 15/05/09 Pi R06019aa | 1 |
| 33***58 | Panel, Soundproofing, Lh Lower; Superseded To 33***50 On San100739, D.Jackson 15/05/09 Pi R06019aa | 1 |
B1-1-1 Mounting, Axle
| 13***33 | Bolt, Plain | 8 |
| 13***01 | Nut | 16 |
| 26***60 | Plate, Spreader | 4 |
B1-15-2 Fenders, Front, Plastic,476mm Wide, And Light Guards
| 13***6D | Bolt, M10 X 70mm Long | 8 |
| 13***1D | Bolt, M10 X110mm | 4 |
| 13***3D | Nut, Self Lock M10 | 8 |
B1-15-13 Fenders, Front, Plastic, 550mm Wide, And Light Guards
| 13***8D | Setscrew, M10 X 30 | 16 |
| 13***7D | Bolt, M10 X 75mm | 8 |
| 13***3D | Nut, Self Lock M10 | 24 |
B1-23-1 Fenders, Front, Plastic, And Wheel Chock, German Option
| 13***5D | Setscrew, M8x20 | 8 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***8D | Setscrew, M8 X 30mm | 8 |
B1-15-3 Fenders, Front, Plastic,550mm Wide, And Light Guards
| 13***8D | Setscrew, M10 X 30 | 16 |
| 13***6D | Bolt, M10 X 70mm Long | 4 |
| 13***1D | Bolt, M10 X110mm | 4 |
B1-3-1 Centre Pivot
| 13***3D | Setscrew, M10 X16mm | 4 |
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***2D | Nut, Thin, M30 | 1 |
B1-12-1 Counterweight, Rear
| 13***3D | Bolt, M24 X 130mm | 2 |
| 33***49 | Counterweight; Mss To 33***12 + 33***14 + 33***98, San23703 (Pi R00411 Ab) D.Jackson 15/05/07 | 1 |
| 33***93 | Plate, Reflector Wa | 2 |
B1-17-1 Engine Cover
| 12***00 | Latch, Claw | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
| 13***1D | Screw, Set M6x12 | 2 |
B1-15-6 Fenders, Front, Steel, And Light Guards
| 13***7D | Screw, M6 X 25mm | 6 |
| 13***7D | Setscrew, M10 X 25mm Long | 16 |
| 13***6D | Bolt, M10 X 70mm Long | 8 |
B1-14-1 Fenders, Rear
| 13***7D | Setscrew, M8x25 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***9D | Setscrew, M8x35 | 8 |
B1-13-1 Mirror,Tow Hitch, Bonnet Mounted
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3D | Setscrew | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
B1-26-1 Guard, Front Chassis
| 13***9Z | Bolt | 2 |
| 13***9D | Setscrew, M8x35 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
B1-23-12 Fenders, Front, Plastic, 476mm Wide, And Wheel Chock, German Option
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Bolt, M10 X 55mm | 8 |
| 13***7D | Bolt, M10 X 75mm | 8 |
B1-18-2 Sound Proofing, Engine Cover
| 33***35 | Panel, Soundproofing, Upper Centre | 1 |
| 33***50 | Panel, Soundproofing, Lh Upper | 1 |
| 33***80 | Panel, Soundproofing, Rh Upper | 1 |
B1-17-5 Engine Cover, Mounting
| 13***0D | Setscrew, M12 X 40 | 4 |
| 13***3D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 11 |
B1-8-1 Tank, Hydraulic
| 12***53 | Gauge, Sight | 1 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***0D | Setscrew, M12 X 40 | 3 |
B1-25-1 Front Bumper
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***4D | Bolt, M24 X 280lg | 4 |
| 13***3D | Nut, Self Lock M10 | 2 |
B1-2-1 Centre Pivot, Articulation Buffer
| 12***02 | Plate, Compression | 2 |
| 13***3D | Nut, M16 | 4 |
| 14***61 | Plate, Compression | 2 |
B1-27-1 Belly Plate, Rear Chassis
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***0D | Setscrew, M10 X 40mm | 6 |
| 13***3D | Nut, Self Lock M10 | 2 |
B1-19-1 Air Conditioning, Condenser
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***0D | Setscrew | 2 |
| 13***1D | Screw, M6x45 | 2 |
B1-26-2 Guard, Front Chassis
| 13***9D | Setscrew, M8x35 | 2 |
| 14***2D | Washer, 5/16in Medium | 2 |
| 14***7D | Washer, M8 Plain | 2 |
B1-4-1 Belly Plates
| 13***7D | Setscrew, M8x25 | 3 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***0D | Setscrew, M10 X 40mm | 7 |
B1-15-7 Fenders, Front, Steel, And Light Guards
| 13***7D | Screw, M6 X 25mm | 6 |
| 13***7D | Setscrew, M10 X 25mm Long | 16 |
| 13***6D | Bolt, M10 X 70mm Long | 8 |
B1-15-12 Fenders, Front, Plastic, 476mm Wide, And Light Guards
| 13***6D | Bolt, M10 X 70mm Long | 8 |
| 13***7D | Bolt, M10 X 75mm | 8 |
| 13***3D | Nut, Self Lock M10 | 8 |
B1-23-13 Fenders, Front, Plastic, 550mm Wide, And Wheel Chock, German Option
| 13***5D | Setscrew, M8x20 | 8 |
| 13***8D | Setscrew, M10 X 30 | 8 |
| 13***3D | Bolt, M10 X 55mm | 8 |
B1-21-1 Guard, Propshaft
| 13***7D | Setscrew, M10 X 25mm Long | 6 |
| 14***8D | Washer, M10 | 6 |
| 33***65 | Guard, Propshaft | 1 |
B1-15-5 Fenders, Front, Steel, And Light Guards
| 13***3D | Screw, M5x16 | 8 |
| 13***7D | Screw, M6 X 25mm | 6 |
| 13***7D | Setscrew, M8x25 | 16 |
B1-23-2 Fenders, Front, Plastic, 476mm Wide, And Wheel Chock, German Option
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Bolt, M10 X 55mm | 8 |
| 13***6D | Bolt, M10 X 70mm Long | 4 |
B1-6-1 Tank, Diesel Fuel
| 13***3D | Screw, M5x16 | 4 |
| 13***0D | Setscrew, M12 X 40 | 3 |
| 13***1D | Screw, M12x45 | 2 |
B1-12-2 Counterweight, Rear
| 13***3D | Bolt, M24 X 130mm | 2 |
| 33***12 | Counterweight | 1 |
| 33***14 | Plate, Reflector | 2 |
B1-24-1 Mounting, Tools
| 12***00 | Strap | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, M6 Lock | 3 |
B1-23-7 Fenders, Front, Steel, And Wheel Chock, German Option
| 13***7D | Screw, M6 X 25mm | 6 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***7D | Setscrew, M10 X 25mm Long | 8 |
B1-5-1 Steer Ram Pivots
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
| 14***18 | Spacer, 0.5mm | 2 |
B2-7-1 Cab Mountings
| 13***2D | Bolt | 4 |
| 13***3D | Nut, M16 | 4 |
| 14***1D | Washer, M16 | 4 |
B2-12-1 Interior Mouldings
| 12***31 | Vent, Air Register | 3 |
| 12***40 | Plug, Blanking, 30mm | 4 |
| 14***02 | Screw, No.10 X 1/2" Long | 2 |
B2-18-1 Guard, Top Screen
| 13***9D | Setscrew, M10 X 35mm Long | 6 |
| 13***0D | Setscrew, M10 X 40mm | 2 |
| 13***3D | Nut, Self Lock M10 | 8 |
B2-16-1 Blind, Front
| 33***22 | Blind, Scissor | 1 |
| 82***06 | Screw, Socket Flange Head, M5 X 20 | 4 |
B2-16-5 Blind, Roof
| 13***7D | Screw, M6 X 25mm | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 33***23 | Blind, Roller | 1 |
B2-20-1 Rivet Nut Location
| 82***01 | Nut, Rivet,M6 Open Ended, For 3 To 5.5mm Plt | 13 |
| 82***79 | Nut, M6 | 30 |
| 82***73 | Nut, Bollhof M5 | 20 |
B2-4-1 Cab Assembly
| 13***8D | Setscrew | 6 |
| 13***3D | Nut, M6 Lock | 6 |
| 14***6D | Washer, M6 Plain | 6 |
B2-9-1 Seat, Assembly, Air Suspension, Fabric
| 13***3D | Nut, Self Lock M8 | 4 |
| 33***02 | Seat, Air Suspension, With Rear Net | 1 |
| 33***73 | Plate, Mounting | 1 |
B2-21-1 Mirror, Interior
| 33***74 | Mirror, Interior, Mirror, Interior; If Required. Machines Built Prior To February 2001 Use Previous Mirror | 1 |
| 82***60 | Nut, M5 Rivet | 2 |
| 82***06 | Screw, Socket Flange Head, M5 X 20 | 2 |
B2-17-1 Guard, Windscreen
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
B2-25-1 Fire Extinguisher
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
| 26***67 | Extinguisher, Fire, Excludes Cradle | 1 |
| 82***06 | Screw, Socket Flange Head, M5 X 20 | 2 |
B2-13-1 Cover, Hydraulic Pump
| 33***99 | Cover, Wa; Re-Instated On San 10***60 D.Jackson 14/09/09, Was Superseded To 33***45 But This Was Never Introduced. | 1 |
| 82***60 | Screw, Button Head, M6x25 | 6 |
B2-15-1 Mirror, External, Deluxe
| 13***8D | Bolt, M8x30mm | 6 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***7D | Washer, M8 Plain | 6 |
B2-6-1 Roof Lining
| 13***7D | Screw, M6 X 25mm | 2 |
| 14***00 | Kit, Speaker Blanking | 2 |
| 14***6D | Washer, M6 Plain | 2 |
B2-14-2 Sound Proofing, Cab
| 33***37 | Panel, Soundproofing, Lh Front | 1 |
| 33***38 | Panel, Soundproofing | 4 |
| 33***39 | Panel, Soundproofing, Seat Base | 1 |
B2-8-1 Servo Control Arm
| 12***35 | Joint, Ball | 2 |
| 13***4D | Bolt, 7/16 Unf X 2 Lg. | 1 |
| 13***8D | Bolt, M6 X 30 | 4 |
B2-11-1 Suspension Unit, Seat
| 40***07 | Kit-Handle | 1 |
| 40***08 | Guide | 1 |
| 40***09 | Handle | 1 |
B2-9-5 Seat, Components, Air Suspension, Fabric
| 33***32 | Net, Rear Backrest | 1 |
| 33***02 | Seat, Air Suspension, With Rear Net | 1 |
| 40***11 | Kit-Slide Rails | 1 |
B2-2-5 Door, Left Side, Sliding Window
| 13***3D | Nut, M6 Lock | 3 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***6D | Washer, M6 Plain | 3 |
B2-14-1 Sound Proofing, Cab
| 26***67 | Kit, Soundproofing | 1 |
| 33***71 | Panel, Soundproofing, Lh Front; Superseded To 33***37 On San100739 | 1 |
| 33***75 | Panel, Soundproofing, Front; Superseded To 33***38 On San100739 | 4 |
B2-15-5 Mirror, External, Standard
| 12***70 | Mirror, Exterior Head Assembly | 2 |
| 12***74 | Glass, Convex Mirror | 1 |
| 12***95 | Mirror, Assembly L.H. | 1 |
B2-22-1 Cover, Air-Con
| 34***61 | Cover, Moulding | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 4 |
B2-9-20 Seatbase, Angle Adjustment Kit, Sales Special
| 33***44 | Kit-Seat, Pan Angle Adjustment | 1 |
B2-3-5 Door, Right Side, Sliding Window
| 13***3D | Nut, M6 Lock | 3 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***6D | Washer, M6 Plain | 3 |
B2-3-1 Door, Right Side
| 13***3D | Nut, M6 Lock | 3 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***6D | Washer, M6 Plain | 3 |
B2-10-5 Seat, Components, Mech. Suspension, Fabric
| 33***32 | Net, Rear Backrest | 1 |
| 33***03 | Seat, Suspension, Mechanical,With Net | 1 |
| 40***37 | Cover, Rh | 1 |
B2-5-1 Floormat
| 13***3D | Nut, M6 Lock | 4 |
| 14***6D | Washer, M6 Plain | 4 |
| 33***09 | Kickplate | 2 |
B2-9-10 Seat Belt
| 13***4D | Bolt, 7/16 Unf X 2 Lg. | 1 |
| 27***98 | Spacer | 1 |
| 40***93 | Kit, Seat Belt | 1 |
B2-1-1 Cab Glazing, Tinted, 3 Piece Front Screen
| 33***35 | Pillar, Window | 4 |
| 33***24 | Cushion, Windscreen Spacer | 2 |
| 33***41 | Glass, Roof | 1 |
B2-2-1 Door, Left Side
| 13***3D | Nut, M6 Lock | 3 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***6D | Washer, M6 Plain | 3 |
B2-10-1 Seat, Assembly, Mech. Suspension, Fabric
| 13***3D | Nut, Self Lock M8 | 4 |
| 33***03 | Seat, Suspension, Mechanical,With Net | 1 |
| 33***74 | Plate, Mounting | 1 |
B3-3-1 Boom Nose Cover
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***20 | Cover, Boom Nose | 1 |
B3-4-1 Quickhitch, Isolation Kit, Pin & Cone, Boom Mounted
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***1D | Screw, Set M6x12 | 3 |
| 13***3D | Setscrew | 5 |
B3-5-1 Guard, Extension Ram, Sales Special Option
| 13***5D | Setscrew, M10 X 20 | 8 |
| 13***1D | Setscrew, M10 X 45 | 2 |
| 13***4D | Bolt, M10 X 60 | 2 |
B3-2-2 Pivot Pins, Linkage
| 13***8D | Setscrew, M16 X 30mm | 1 |
| 13***9D | Screw, M16x35lg | 2 |
| 13***4D | Bolt | 4 |
B3-1-3 Boom
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***2D | Bolt, M10 X 50mm | 4 |
| 13***1D | Screw, M12x45 | 2 |
B3-1-2 Boom
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***2D | Bolt, M10 X 50mm | 4 |
| 13***1D | Screw, M12x45 | 2 |
B3-2-1 Pivot Pins & Links
| 13***9D | Screw, M16x35lg | 3 |
| 13***4D | Bolt | 4 |
| 13***0D | Bolt | 1 |
B3-1-1 Boom
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***1D | Screw, M12x45 | 2 |
| 13***4D | Bolt, M10 X 60mm | 4 |
B5-10-1 Paint
| 42***01 | Thinners, 5 Litres | 1 |
| 42***01 | Paint, Black, 1 Lts, Semi-Gloss Enamel; San 10***16 | 1 |
| 42***02 | Paint, Black, 2.5 Lts, Semi-Gloss Enamel | 1 |
B5-8-1 Labels, Hydraulic Tow Hitch
| 33***60 | Plate, Towing Capacity | 1 |
| 81***18 | Decal, Hitch Release | 1 |
| 81***77 | Decal, Tow Hitch Release, Lever | 1 |
B5-7-1 Labels, German & Italian
| 70***00 | Reflector, Amber, Self Adhesive | 8 |
| 81***70 | Label, Bonnet 40kph | 3 |
| 81***16 | Label, Speed Limit, 20kph | 1 |
B5-3-1 Labels, Warning
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-2-1 Labels, Noise Level
| 81***56 | Label, External Noise, 104lwa | 1 |
| 81***58 | Label, Sound Power, Level External | 1 |
| 81***59 | Decal, External Noise | 1 |
B5-5-1 Labels, Load Charts
| 81***96 | Label, Loadchart, Pin And Cone | 1 |
| 81***97 | Label, Loadchart, Q-Fit | 1 |
B5-4-1 Labels
| 33***33 | Label, Battery Isolator | 1 |
| 33***20 | Decal, No Naked Flame, Diesel | 1 |
| 33***74 | Label, Hydraulic Oil | 1 |
B5-1-1 Labels, Identity
| 33***74 | Decal, "Tm310" | 2 |
| 33***10 | Decal, "Tm310s" | 2 |
| 33***68 | Decal, "Tm310 Wm" | 2 |
B5-6-1 Labels, Safety
| 33***94 | Decal, Crush Hazard | 2 |
| 81***57 | Decal, Emergency Exit | 1 |
| 81***02 | Decal, Warning, Pressure Hazard | 1 |
B5-11-1 Tool Kit
| 40***17 | Grease, Hp, 400g X 24 | 1 |
| 82***13 | Key, Allen | 1 |
| 82***28 | Tool, Wrench Wheel Nut, 28.83-28.57mm A/F | 1 |
B6-1-1 Homologation, Rear Number Plate, Italian
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***2D | Washer, Large | 8 |
C Electrics-Machine, Cab & Engine
C1-15-1 Trailer Electrics
| 13***0D | Setscrew, M8 X 40mm Long | 8 |
| 13***3D | Nut, Lock M5 | 4 |
| 13***9D | Capscrew | 3 |
C1-12-1 Horn, Single Tone
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 2 |
C1-1-1 Harnesses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 25 |
| 27***43 | Shield, Harness Protection, T=1mm | 25 |
| 33***85 | Harness, Gearbox Link | 1 |
C1-14-2 Light, Working, Boom Mounted
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 10 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
C1-16-1 Earth Leads
| 13***5D | Setscrew, M10 X 20 | 1 |
| 13***5D | Screw, M12 X 20mm Long | 1 |
| 13***7D | Setscrew, M12 X 25 | 1 |
C1-4-1 Light, Head, Left Hand Dip
| 70***92 | Light, Head 12v Assembly, L/H Dip L/H Mounted | 1 |
| 70***93 | Light, Head 12v Assembly, L/H Dip R/H Mounted | 1 |
| 71***27 | Plug, Blank | 2 |
C1-10-1 Lights Working, Front & Rear
| 33***73 | Plate, Mounting, Rear Worklight | 2 |
| 70***45 | Light, Working,Lh | 2 |
| 70***46 | Light, Working,Rh | 2 |
C1-9-1 Alarm, Reverse, 97db
| 13***3D | Setscrew | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***1D | Nut, Plain | 2 |
C1-8-1 Light, Number Plate, Cab Mounted
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
C1-2-1 Fuse Link Box
| 13***5D | Setscrew, M8x20 | 5 |
| 14***7D | Washer, M8 Plain | 6 |
| 33***38 | Harness, Primary Fuse | 1 |
C1-5-1 Light, Head, Right Hand Dip
| 70***94 | Light, Head 12v Assembly, R/H Dip L/H Mounted | 1 |
| 70***95 | Light, Head 12v Assembly, R/H Dip R/H Mounted | 1 |
| 71***27 | Plug, Blank | 2 |
C1-14-1 Light, Working, Boom Mounted
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 10 |
| 13***1D | Setscrew, M10 X 45 | 2 |
| 13***4D | Bolt, M10 X 60 | 2 |
C1-3-1 Battery
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 26***93 | Cover, Battery Isolator | 1 |
C1-11-1 Light, Beacon, Hazard Warning
| 33***34 | Harness, Extension, Beacon Socket | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
C1-1-5 Harnesses, Control Area Network, (Can)
| 33***65 | Harness, Can, 2000mm (X2) Livelink | 1 |
| 72***01 | Connector, T Splitter | 4 |
| 72***03 | Connector, Straight | 2 |
C1-9-5 Alarm, Reverse, 107db, White Noise
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***0D | Bolt | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-7-1 Light, Rear
| 13***1Z | Nut | 4 |
| 14***6D | Washer, M6 Plain | 4 |
| 24***01 | Grommet | 8 |
C1-13-1 Light,Reverse & Fog, Lh & Rh Drive
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 24***01 | Grommet | 4 |
C2-5-1 Seat, Switch, Engine Cutout
| 13***1D | Setscrew | 2 |
| 13***1D | Nut, Plain, M4 | 2 |
| 14***4D | Washer, Plain M4 | 4 |
C2-4-1 Alternator, 14volt - 95amp
| 13***8Z | Screw, Star Drive, M10 X 30 | 1 |
| 13***2Z | Bolt, Star Drive, M10 X 120 | 1 |
| 32***10 | Alternator, 14v-95amp | 1 |
C2-2-1 Engine Harness
| 32***13 | Main Harness, Tier 3 | 1 |
C2-1-1 Switches & Sensors, 12volt
| 13***8Z | Bolt, M8 X 30, Flange Reduced Hex | 2 |
| 32***46 | Switch, Oil Pressure | 1 |
| 32***55 | Sensor, Temperature | 1 |
C2-1-2 Unit, Electronic Control
| 13***1Z | Bolt, M8 X 45, Flange Reduced Hex | 4 |
| 32***9R | Unit, Engine Control Unit - 97kw | 1 |
| 32***0R | Unit, Engine Control Unit - 108kw | 1 |
C2-3-1 Starter Motor, 12.Volt
| 13***8Z | Screw, Star Drive, M10 X 30 | 3 |
| 32***32 | Motor, Starter 12v, With Earth Stud | 1 |
| 32***35 | Motor, Starter | 1 |
C3-3-1 Diodes
| 70***14 | Diode, 4 Way | 2 |
C3-22-2 Heater Hoses
| 13***1D | Bolt, M8x45mm | 1 |
| 14***53 | Tube, Connection; San23496.Ss To 65***66.Pi Mn06/128.P Gamble, 28/03***07 | 5 |
| 22***06 | Clip, Jubilee | 15 |
C3-13-10 Control Unit, Transmission, 4 Speed, Sales Special
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***1D | Setscrew, M8x45 | 3 |
| 13***3D | Nut, Self Lock M8 | 3 |
C3-12-1 Radio Installation
| 13***1D | Nut, M8 | 1 |
| 14***6D | Washer, M6 Plain | 1 |
| 71***00 | Aerial | 1 |
C3-11-1 Wash Wipe, Rear Screen
| 29***00 | Jet, Washer, Assembly | 1 |
| 33***79 | Stop, Bump | 1 |
| 33***13 | Motor, Wiper | 1 |
C3-1-1 Main Switch Panel
| 26***35 | Knob, Heater Control, With Switch | 1 |
| 26***36 | Knob, Air-Con, With Switch | 1 |
| 33***81 | Ashtray | 1 |
C3-8-1 Indicator, Safe Load
| 13***9D | Screw, M10x35 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***5D | Washer | 2 |
C3-20-1 Air-Con, Installation
| 13***7D | Setscrew, M8x25 | 2 |
| 13***6D | Bolt, M8x70 | 1 |
| 14***00 | Canister, Gas Charge, Refrigerant | 0 |
C3-6-1 Switch,Column
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
C3-23-1 Heater Unit, Components
| 13***1Z | Screw, M4 X 12 | 7 |
| 14***43 | Actuator, Cable Operated | 1 |
| 30***22 | Core, Heater | 1 |
C3-5-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-21-1 Air Con. Unit, Components
| 13***1Z | Screw, M4 X 12 | 7 |
| 13***3Z | Nut | 2 |
| 14***43 | Actuator, Cable Operated | 1 |
C3-2-1 Instrument Panel
| 33***97 | Plate, Front Instrument | 1 |
| 33***45 | Diode, 3a 1000 Volt | 1 |
| 33***31 | Panel, Instrument, Inc. Software | 1 |
C3-4-1 Fuse And Relays
| 13***1D | Setscrew, M5 X 12mm Long | 1 |
| 13***3D | Nut, Lock M5 | 1 |
| 13***1D | Nut, M12 | 1 |
C3-13-5 Control Unit, Transmission, 6 Speed
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***1D | Setscrew, M8x45 | 3 |
| 13***3D | Nut, Self Lock M8 | 3 |
C3-22-1 Heater Hoses
| 13***1D | Bolt, M8x45mm | 1 |
| 14***53 | Tube, Connection; San23496.Ss To 65***66.Pi Mn06/128.P Gamble, 28/03***07 | 4 |
| 22***06 | Clip, Jubilee | 13 |
C3-14-1 Livelink
| 13***3D | Nut, M6 Lock | 3 |
| 14***1D | Washer, Large | 3 |
| 33***18 | Sensor, Livelink, Row, Gprs Network | 1 |
C3-13-1 Control Unit, Transmission, 3 Speed
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***1D | Setscrew, M8x45 | 3 |
| 13***3D | Nut, Self Lock M8 | 3 |
C3-9-1 Instrument Panel, Roof Mounted
| 33***76 | Panel, Roof Mounted | 1 |
| 70***25 | Actuator, Beacon, Convoy Warning | 1 |
| 70***26 | Actuator, Front Worklights, Switch Decal | 1 |
C3-10-1 Wash/Wipe, Windscreen
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 33***11 | Bracket, Wiper Motor | 1 |
D Controls-Machine, Engine & Steering
D2-2-1 Control, Throttle Pedal
| 72***00 | Pedal, Throttle | 1 |
D3-2-1 Steering Column, Covers
| 13***1D | Setscrew, M5 X 12mm Long | 4 |
| 14***1D | Washer, Plain 2ba | 4 |
| 16***21 | Mounting, Moulding Ga,Abi; San 22611.Cwe By Mss To 33***48 & 82***33, X 4.P Gamble 11/09***06 | 1 |
D3-3-1 Steering Wheel
| 12***89 | Wheel, Steering, As Supplied | 1 |
| 13***2Z | Nut | 1 |
| 14***7Z | Washer | 1 |
D3-1-1 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 16***61 | Bearing, Thrust Assembly | 1 |
E Hydraulics & Air Including, Steering
E1-21-1 Hose And Pipework, Servo Controller, Loader
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
E1-8-1 Service, Field Fit, Boom Judder, Non Srs Machines
| 33***09 | Adapter, Restrictor, 1 Way | 2 |
E1-14-1 Hose And Pipework, Steer Valve, And Rams
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 12***61 | Plate, Retainer | 1 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
E1-0-2 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-3-1 Manifold Block, &, Accumulator Assembly
| 13***0D | Bolt, M6x100mm | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
E1-2-2 Hose And Pipework, Main Pump, & Hydraulics
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 9 |
| 13***9D | Setscrew, M8x35 | 4 |
| 13***7D | Setscrew, M12 X 25 | 1 |
E1-14-2 Hose And Pipework, Steer Valve, And Rams
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 12***61 | Plate, Retainer | 1 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
E1-0-1 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-23-1 Hose And Pipework, Anti-Cav. Valve
| 13***0D | Bolt | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***8D | Washer, M10 | 2 |
E1-4-1 Hose And Pipework, Tilt Ram
| 13***2D | Setscrew, M8 X 50 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 2 |
E1-20-1 Hose And Pipework, Hydraulic Oil Cooler
| 14***26 | Washer, Seal | 1 |
| 16***57 | Adapter, 1 Bsp Male/Male | 1 |
| 16***12 | Adapter | 1 |
E1-6-1 Accumulators, Srs
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 24***03 | O Ring | 1 |
E1-2-1 Hose And Pipework, Main Pump, & Hydraulics
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
E1-11-1 Hose And Pipework, Hydraulic Tank
| 16***14 | Adapter | 1 |
| 22***12 | Clip, Jubilee | 1 |
| 47***96 | Hose | 1 |
E1-21-2 Hose And Pipework, Servo Controller
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***7D | Setscrew, M8x25 | 4 |
| 14***4D | Washer, Lock 1/2" | 6 |
E1-17-1 Hose And Pipework, Srs Diverter Valve
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***2D | Screw | 2 |
| 14***6D | Washer, M6 Plain | 2 |
E1-7-1 Hose And Pipework, Loader Valve
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***4D | Screw | 2 |
| 13***8D | Setscrew, M10 X 30 | 4 |
E1-15-1 Hose And Pipework, Accumulator Block
| 13***6D | Bolt, M8x70 | 2 |
| 14***7D | Washer, M8 Plain | 3 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
E1-9-1 Service, Field Fit, Boom Judder, Srs Machines
| 16***51 | Adaptor | 1 |
| 33***95 | Link, 2 Way | 1 |
| 33***09 | Adapter, Restrictor, 1 Way | 2 |
E1-1-1 Hose And Pipework, Boom
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
E1-18-1 Srs Kit Of Parts, Retro-Fit
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***2D | Screw | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
E1-22-1 Hose And Pipework, Servo Controller, Under Cab
| 16***52 | Adapter | 1 |
| 33***64 | Plate, Floor, Servo Hoses | 1 |
| 33***79 | Pipe, Assembly | 1 |
E2-2-1 Gear Pump & Adapters, Brake
| 13***8D | Capscrew, M10x30 | 2 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 1 |
E2-4-1 Pump, Main, Components
| 20***82 | Pump, Var. Displacement; Superseded By 33***00 D.Jackson 20/03/08, San26076 (Pi R03251 Aa) Pump Failures | 1 |
| 20***11 | Gasket | 1 |
| 20***12 | Screw, Socket Head | 4 |
E2-3-1 Gear Pump Components
| 20***34 | Pump, Gear | 1 |
| 32***30 | Gear, 32t Power Take-Off, Hcr Low Duty | 1 |
| 33***61 | Washer | 1 |
E2-1-1 Pump And Adapters, Main Hydraulic
| 13***0D | Capscrew | 2 |
| 14***9D | Washer, M12 | 2 |
| 16***50 | Adaptor | 1 |
E3-6-1 Valve, Adapters, Load Control, 332/W3080
| 13***8D | Capscrew, M8 X 80mm, Grade 12.9 | 2 |
| 16***50 | Adaptor | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
E3-5-1 Valve, Anti-Cavitation
| 25***82 | Valve, Overcentre | 1 |
| 25***45 | Cartridge, Overcentre Valve | 1 |
| 25***46 | Kit-Seal | 1 |
E3-4-2 Valve, Adapters, Steering
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 2 |
| 33***25 | Valve, Steer | 1 |
E3-0-0 Valve Components, 25/223378
| 25***83 | Seal, O Ring | 20 |
| 25***00 | Poppet | 4 |
| 25***01 | Spring | 4 |
E3-22-1 Valve, Diverter, Srs Lift Ram
| 25***36 | Valve, Diverter | 1 |
| 25***96 | Kit, Seal | 1 |
| 25***01 | Coil, 35mm Long, 12.7mm Dia Hole | 1 |
E3-2-2 Valve Assembly, 332/U2744
| 33***57 | Valve, Outlet Section; Was Mss San23999 17/9/07. Reversed San25487, D.Jackson 15/11/07 Husco Advice Incorrect | 1 |
| 33***78 | Valve, Section | 1 |
| 33***82 | Valve, Section | 1 |
E3-1-2 Valve, Adapters, 332/W6054
| 13***8D | Setscrew, M10 X 30 | 1 |
| 13***0D | Setscrew, M10 X 40mm | 2 |
| 13***3D | Bolt, M10 X 55mm | 3 |
E3-21-1 Valve, Diverter, Srs
| 25***96 | Kit, Seal | 1 |
| 25***87 | Valve, Solenoid | 1 |
| 25***56 | Coil, Solenoid | 1 |
E3-10-1 Lubricants & Filters
| 40***01 | Oil, Jcb Special Hp Gear, 25 Litre | 0 |
| 40***02 | Oil, Jcb Special Hp Gear, 5 Litre | 0 |
| 40***03 | Oil, Jcb Special Hp Gear, 200 Litre | 0 |
E3-7-1 Valve Components, Load Control, 332/W3080
| 25***68 | Kit-Valve, Solenoid | 1 |
| 25***70 | Kit-Valve, Solenoid | 1 |
| 25***71 | Kit-Valve, Check | 1 |
E3-4-1 Valve, Adapters, Steering
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 2 |
| 81***59 | Adapter, Elbow M/M | 1 |
E3-3-1 Filter, Hydraulic, Tank Mounted
| 32***04 | O Ring | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
| 32***92 | Insert | 1 |
E3-2-3 Valve Assembly, 332/W6054
| 33***57 | Valve, Outlet Section; Was Mss San23999 17/9/07. Reversed San25487, D.Jackson 15/11/07 Husco Advice Incorrect | 1 |
| 33***78 | Valve, Section | 1 |
| 33***82 | Valve, Section | 1 |
E3-1-1 Valve, Adapters, 25/223378, 332/U2744
| 13***8D | Setscrew, M10 X 30 | 1 |
| 13***0D | Setscrew, M10 X 40mm | 2 |
| 13***3D | Bolt, M10 X 55mm | 3 |
E3-0-2 Valve Components, 332/W6054
| 25***83 | Seal, O Ring | 20 |
| 25***00 | Poppet | 4 |
| 25***01 | Spring | 4 |
E3-2-1 Valve Assembly, 25/223378
| 25***78 | Valve, Assembly | 1 |
| 33***57 | Valve, Outlet Section; Was Mss San23999 17/9/07. Reversed San25487, D.Jackson 15/11/07 Husco Advice Incorrect | 1 |
| 33***78 | Valve, Section | 1 |
E3-0-1 Valve Components, 332/U2744
| 25***83 | Seal, O Ring | 20 |
| 25***00 | Poppet | 4 |
| 25***01 | Spring | 4 |
E4-5-1 Ram, Quickhitch
| 26***38 | Ram, Double Ended; Superseded By 33***08 D.Jackson 17/10/07, San25375 (Pi R01335 Aa) Re Designed Ram | 1 |
| 33***92 | Kit-Seal | 1 |
| 33***02 | Rod | 2 |
E4-3-5 Ram, Steering, Rh
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***99 | Ram, Steer, Rh | 1 |
| 55***99 | Cylinder | 1 |
E4-4-2 Ram, Extension
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 2 |
| 25***00 | Cartridge, Counter Balance; Replaces 25/20***00 | 1 |
E4-1-2 Ram, Lift, Srs & Non Srs M/C'S
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
| 17***03 | Plug, Blanking | 1 |
E4-8-1 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 25***84 | Cartridge, Counter Balance | 1 |
| 25***02 | Kit-Seal | 1 |
E4-2-1 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 17***03 | Plug, Blanking | 1 |
| 24***06 | O Ring | 1 |
E4-4-1 Ram, Extension
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 1 |
| 25***00 | Cartridge, Counter Balance; Replaces 25/20***00 | 1 |
E4-8-2 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 25***84 | Cartridge, Counter Balance | 1 |
| 25***02 | Kit-Seal | 1 |
E4-5-2 Ram, Quickhitch
| 13***3Z | Nut, M20 | 1 |
| 24***02 | Seal, Gland | 1 |
| 24***27 | Seal | 1 |
E4-5-3 Ram, Quickhitch
| 23***06 | O Ring | 1 |
| 24***02 | Seal, Gland | 1 |
| 24***27 | Seal | 1 |
E4-1-1 Ram, Lift, Srs & Non Srs M/C'S
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
| 17***03 | Plug, Blanking | 1 |
E4-6-1 Ram, Displacement
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***74 | Ram, Displacement | 2 |
| 55***74 | Cylinder | 1 |
E4-3-1 Ram, Steering, Lh
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***47 | Ram, Steer | 2 |
| 55***99 | Ram, Steer, Rh | 1 |
F Axles, Wheels & Transmission
F1-2-1 Axle Drive Head, 2.538 : 1
| 13***07 | Capscrew | 8 |
| 41***02 | Sealant, Locking | 0 |
| 41***02 | Gasket, High Strength, 50ml | 0 |
F1-5-1 Differential, Components,450/10900, Std.
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-6-1 Drivehead, Assembly, 458/11196, Std.
| 13***07 | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F1-1-1 Axle Assembly, Front, 13 : 7 : 1
| 13***33 | Bolt, Plain | 4 |
| 13***7Z | Bolt, Coated | 4 |
| 13***16 | Bolt, M16x70l | 28 |
F1-4-1 Differential, Components,450/26200, Limited Slip
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F1-3-1 Crown Wheel & Pinion
| 45***00 | Differential, Assembly | 1 |
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***46 | Gear, Crown Wheel And, Pinion | 1 |
F1-7-1 Drivehead, Assembly, 458/11192, Lsd
| 13***07 | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F2-7-1 Drivehead, Assembly, 458/11072, Lsd
| 13***07 | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F2-5-1 Differential, Components,450/10900, Std.
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F2-4-1 Differential, Components,450/26200, Limited Slip
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-6-1 Drivehead, Assembly, 458/11074, Std.
| 13***07 | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F2-3-1 Crown Wheel & Pinion
| 45***00 | Differential, Assembly | 1 |
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***60 | Gear, Crown Wheel & Pinion, 13t/33t; See Gen Ti 209 | 1 |
F2-1-1 Axle Assembly, Rear
| 13***33 | Bolt, Plain | 4 |
| 13***7Z | Bolt, Coated | 4 |
| 13***16 | Bolt, M16x70l | 28 |
F2-2-1 Axle Drive Head, 2.538 : 1
| 13***07 | Capscrew | 8 |
| 41***02 | Sealant, Locking | 0 |
| 41***02 | Gasket, High Strength, 50ml | 0 |
F3-12-1 Wheel & Tyre, Michelin, 440/80r24, Sales Special
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 33***73 | Wheel, & Tyre, 44***24 Xmcl | 4 |
F3-8-1 Wheels & Tyres, Michelin,12 X 9 R24, Xsm D2+
| 10***01 | Nut | 6 |
| 25***01 | Valve | 1 |
| 33***15 | Wheel, & Tyre Assembly, Xsmd2 12.0x24 26 Out | 4 |
F3-7-1 Wheels & Tyres, Michelin,12 X 9 R24, X-Mine D2
| 10***01 | Nut | 6 |
| 16***75 | Wheel, And Tyre Assembly, 12x9r24 X-Mine D2 | 4 |
| 25***01 | Valve | 1 |
F3-20-1 Propshafts, Transmission
| 11***25 | Strap | 10 |
| 13***3Z | Nut, Philedas | 4 |
| 13***7D | Capscrew, M12 X 25 | 2 |
F3-6-1 Wheels & Tyres, Goodyear,500/70 R24
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 16***18 | Wheel, And Tyre Assembly, Goodyear 50***24 | 4 |
F3-1-1 Wheels & Tyres, Goodyear,15.5/80 R24
| 10***01 | Nut | 25 |
| 11***00 | Wheel, Assembly, Goodyear, 15.5/80x24x12pr Sgi | 4 |
| 15***01 | Valve | 1 |
F3-3-2 Wheel & Tyre, Goodyear, 460/70 R24
| 10***01 | Nut | 5 |
| 15***01 | Valve | 1 |
| 33***53 | Rim, Wheel, Dw14lx24 | 1 |
F3-10-1 Wheels & Tyres, Michelin,500/70 R24
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 33***38 | Wheel, & Tyre,500/70 24, Xmcl | 4 |
F3-9-1 Wheels & Tyres, Michelin,460/70 R24
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 33***33 | Wheel, & Tyre 460/70 R24, Xmcl | 4 |
F3-5-1 Wheels & Tyres, Michelin,15.5 R25
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 16***77 | Wheel, & Tyre 15.5 R25 Xha, Rad.L3 Mich | 4 |
F3-14-1 Wheel & Tyre, Alliance, 600/50 R22.5
| 15***01 | Valve | 1 |
| 33***25 | Wheel, Rim, W20 X 22.5 | 1 |
| 33***06 | Tyre, Alliance I-331, 600/50-22.5 | 1 |
F3-2-1 Wheels & Tyres, Goodyear,500/70 R24
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 33***09 | Wheel, Assembly, 50***24, It520, Goodyear | 4 |
F3-3-1 Wheels & Tyres, Goodyear,460/70 R24
| 10***01 | Nut | 5 |
| 15***01 | Valve | 1 |
| 15***60 | Wheel, & Tyre Assembly Goodyear, 17.5lr X 24 Traction | 4 |
F3-11-1 Wheels & Tyres, Continental, 445/70 R24
| 15***01 | Valve | 1 |
| 33***86 | Wheel, Assembly,Continental, 445/70 R24 15 Outset | 4 |
| 41***83 | Wheel, Rim, Tw14lx24 (15 Outset) | 1 |
F3-1-2 Wheel & Tyre, Goodyear, 15.5/80 R24
| 10***01 | Nut | 5 |
| 15***01 | Valve | 1 |
| 33***68 | Rim, Wheel, Dw14lx24 | 1 |
F5-12-1 Torque Converter, 130 & 145 Hp Engines, W300 2.52 Ratio
| 04***03 | Bolt | 4 |
| 04***84 | Converter, W300 2.52 Ratio | 1 |
| 04***64 | Kit-Drive Plate, Torque Converter | 1 |
F5-11-1 Pump & Driveshaft
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***52 | Pump, Assembly, Transmission | 1 |
| 22***78 | Circlip | 1 |
F5-13-1 Filter,Transmission, (Remote Fitting)
| 13***0D | Bolt | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***19 | Seal, Dowty | 3 |
F5-27-3 Solenoid, Switches, And Pipework, 459/M3083
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F5-6-1 459/10229, 6 Speed Clutch
| 33***16 | Plate, Counter, Clutch | 5 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-7-2 Solenoid, Switches, And Pipework, 459/10199
| 13***03 | Capscrew, M8 X 16 | 8 |
| 13***17 | Capscrew | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F5-1-1 Transmission, 442/25410, 2wd, 6sp, External Components
| 13***3Z | Bolt | 2 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***10 | Bolt | 12 |
F5-27-1 Solenoid, Switches, And Pipework, 459/10242
| 13***03 | Capscrew, M8 X 16 | 7 |
| 13***7Z | Capscrew | 8 |
| 14***11 | Seal, Bonded | 1 |
F5-21-1 459/10192, Input Clutch
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-24-1 459/10195, Layshaft Clutch
| 33***16 | Plate, Counter, Clutch | 8 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-3-1 459/10226, Reverser Clutch
| 33***16 | Plate, Counter, Clutch | 12 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-10-1 Transmission, Drop Box
| 13***2D | Setscrew, M16 X 50mm | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 14 |
| 13***1D | Bolt | 2 |
F5-7-1 Solenoid, Switches, And Pipework, 459/10241
| 13***03 | Capscrew, M8 X 16 | 7 |
| 13***17 | Capscrew | 8 |
| 14***11 | Seal, Bonded | 1 |
F5-8-1 Transmission, Mounting
| 12***02 | Plate, Compression | 4 |
| 13***1D | Bolt, M10 X 45mm Long | 8 |
| 13***1D | Bolt, M16 X 110 | 2 |
F5-4-1 459/10227, Mainshaft Clutch
| 33***16 | Plate, Counter, Clutch | 9 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-23-1 459/10194, Mainshaft Clutch
| 33***16 | Plate, Counter, Clutch | 8 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-5-1 459/10228, Layshaft Clutch
| 33***16 | Plate, Counter, Clutch | 8 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-22-1 459/10193, Reverser Clutch
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-1-5 Transmission, 442/27580, 2wd, 6sp, External Components Luc
| 13***3Z | Bolt | 2 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***10 | Bolt | 12 |
F5-1-10 Transmission, 442/00710, 2wd, 3sp, External Components
| 13***3Z | Bolt | 2 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***10 | Bolt | 12 |
F5-7-3 Solenoid, Switches, And Pipework, 459/M3080
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F5-2-1 459/10156, Input Clutch
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-9-1 Dipstick & Filler
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 15***00 | Nut, Sealastic | 1 |
| 33***81 | Bracket | 1 |
F5-1-2 Transmission, 442/25500, 2wd, 6sp, External Components
| 13***3Z | Bolt | 2 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***10 | Bolt | 12 |
F5-27-2 Solenoid, Switches, And Pipework, 459/10200
| 13***03 | Capscrew, M8 X 16 | 7 |
| 13***7Z | Capscrew | 8 |
| 14***11 | Seal, Bonded | 1 |
F5-1-6 Transmission, 442/27710, 2wd, 6sp, External Components Luc
| 13***3Z | Bolt | 2 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***10 | Bolt | 12 |
F5-1-11 Transmission, 442/00880, 2wd, 3sp, External Components
| 13***3Z | Bolt | 2 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***10 | Bolt | 12 |
F6-1-1 Hose And Pipework, Transmission Cooler
| 13***4D | Bolt | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 14***7D | Washer, M8 Plain | 1 |
G Brakes
G1-8-1 Hose And Pipework, Accumulator Block
| 13***6D | Bolt, M8x70 | 2 |
| 14***7D | Washer, M8 Plain | 3 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
G1-7-1 Hose And Pipework, Trailer Brake Valve
| 13***6D | Bolt, M8x70 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 25***06 | Valve, Trailer Brake | 1 |
G1-4-1 459/10180, Parkbrake & Cable
| 13***1Z | Bolt | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 4 |
| 22***43 | Circlip | 1 |
G1-2-1 Brakes, Front Axle
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
G1-1-10 Brake, Pedal Components
| 25***35 | Pedal, & Valve | 1 |
| 33***08 | Pin, Pivot | 1 |
| 33***09 | Pin | 1 |
G1-6-1 Hose And Pipework, Brake System
| 13***9D | Setscrew | 2 |
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 1 |
| 13***6D | Bolt, M8x70 | 2 |
G1-5-1 Parking Brake, Control
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 3 |
| 13***3D | Nut, M12 | 1 |
G1-1-1 Brake Pedal, & Brake Valve
| 13***5D | Setscrew, M8x20 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 2 |
V Jcb444 Engine Installation, Components
V41-2-1 Engine Assembly, 320/40104,145bhp, See Catalogue 9812/2300
| 32***04 | Engine, Assembly, Tca 108kw, W300 T/C | 1 |
V41-1-2 Engine, Assembly, Tca 97kw-12v
| 32***99 | Engine, Assembly, Tca Cr Tier3 97kw 130bhp-12v | 1 |
| 34***58 | I.A, Engine & Cooling, Jcb444 130hp / 97kw | 0 |
V41-2-2 Engine, Assembly, Tca 108kw-12v
| 32***96 | Engine, Assembly, Cr Tier 3 Tca 108kw 145bhp-12v | 1 |
| 34***59 | I.A, Engine & Cooling, Jcb444 145hp/108kw | 0 |
| 34***66 | I.A, Engine And Cooling, Jcb444 145hp / 108kw | 0 |
V41-1-1 Engine Assembly, 320/40111,130bhp, See Catalogue 9812/2300
| 32***11 | Engine, Assembly Tca 130bhp, W300 T/C | 1 |
V42-1-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***9D | Screw, M12x35mm Long | 8 |
| 13***0D | Bolt, M10 X 40mm Long | 8 |
V43-1-1 Filter, Air
| 26***29 | G.A, Filter & Air Intake | 1 |
| 32***71 | Element, Air Filter, Main | 1 |
| 32***72 | Element, Air Filter, Safety | 1 |
V44-1-1 Air Induction Hoses
| 13***5D | Setscrew, M8x20 | 3 |
| 14***7D | Washer, M8 Plain | 3 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
V44-11-1 Oil Breather Hose, Ccv Filter
| 22***08 | Clip, Jubilee | 1 |
| 34***08 | I.A, Engine Ccv Hose | 1 |
| 83***66 | Hose, Oil Breather | 1 |
V44-12-1 Breather, Crank Case, Ccv Filter
| 26***00 | Clip, Harness | 1 |
| 32***26 | Hose, Ccv Outlet | 1 |
| 32***21 | Breather, Crankcase Hose | 0 |
V45-1-4 Exhaust System
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
V45-1-2 Exhaust System
| 02***35 | Nut, Anti-Seize | 3 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***9D | Setscrew, M8x35 | 2 |
V45-1-1 Exhaust System
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
V45-1-3 Exhaust System
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
V46-2-1 Radiator & Fittings, Air Intake, Scavenge System, Sales Special
| 22***11 | Clip, Jubilee | 2 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
| 33***54 | Cowling, Fan | 1 |
V46-1-1 Radiator, Fittings & Mountings
| 13***7D | Setscrew, M8x25 | 4 |
| 13***4D | Screw, M10x60 | 4 |
| 13***3D | Nut, Self Lock M8 | 9 |
V47-1-1 Combination Cooler
| 13***7D | Setscrew, M8x25 | 25 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***3D | Nut, Self Lock M10 | 1 |
V48-1-1 Radiator & Hoses
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***0D | Setscrew, M10 X 40mm | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
V48-11-1 Charge Air Cooler, Hose And Pipework
| 26***37 | G.A, Cac Pipes | 1 |
| 30***98 | Cooler, Charge Air | 1 |
| 82***92 | Clip, Breeze (70-93), Constant Torque | 1 |
V48-11-2 Charge Air Cooler, Hose And Pipework
| 30***98 | Cooler, Charge Air | 1 |
| 33***58 | Pipe, Cac, Inlet | 1 |
| 82***92 | Clip, Breeze (70-93), Constant Torque | 1 |
V49-1-1 Cooling Fan & Spacer
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 26***88 | Fan, Cooling 24" | 1 |
V49-3-1 Front End Drive, Accessory, With Cooling Fan
| 32***02 | Pulley, 0.85:1 Ratio | 1 |
| 32***41 | Screw, Pan Head, M8 X 20 | 4 |
| 32***50 | Hub, Fan Drive, Assembly 1.375 Ratio | 1 |
V49-20-1 Lower Idler Pulley, Small
| 13***9Z | Screw, Star Drive, M8 X 35 | 2 |
| 13***1Z | Screw, Star Drive, M8 X 45 | 1 |
| 32***86 | Pulley, Lower Idler, Assembly | 1 |
V49-4-1 Front End Drive, Accessory, With Cooling Fan & Air Conditioning
| 32***02 | Pulley, 0.85:1 Ratio | 1 |
| 32***30 | Pulley, Idler, Long | 1 |
| 32***41 | Screw, Pan Head, M8 X 20 | 4 |
V49-1-10 Cooling Fan, Reverse, Air Operated, Sales Option
| 13***3D | Screw, M5x16 | 2 |
| 13***7D | Setscrew M5x25 | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
V50-1-1 Fuel Pipes, Fuel Tank To Filter
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 14***8D | Washer, M10 | 2 |
| 32***49 | Filter, Fuel Lift Pump, Assembly, 5 Micron | 1 |
V51-1-1 Filter, Fuel Sediment
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
| 32***08 | Bowl, Assembly | 1 |
V56-1-1 Compressor, Air Conditioning
| 13***0Z | Bolt, Star Drive, M8 X 100mm | 3 |
| 26***80 | G.A, Air Conditioning | 1 |
| 32***62 | Compressor, Air Conditioning, 12v | 1 |
V57-1-1 Engine Oil Drain
| 12***79 | G.A, Drain Engine Sump, Scout | 1 |
| 25***62 | Plug, Oil Drain | 1 |
| 33***28 | Tube, Oil Sump Drain | 1 |
TM310 serial number reference
The machine identification plate is mounted on the machine frame. The plate displays the machine model and build specification indicated by the VIN (on earlier machines) or PIN (on later machines). The serial number of the machine and its major units is stamped on this plate. If a major unit is replaced, the serial number on the identification plate may be incorrect; stamp the new number on the plate or remove the old number to prevent ordering incorrect parts. Confirm applicability with a JCB dealer if the plate is unreadable.
| Prefix | Identifies | Notes |
|---|---|---|
| 1314700 | Applicability: JCB TM310, TM310S, and TM310WM telescopic wheeled loaders. This is the starting serial number for the service manual coverage for these models. | Verified as the start of the serial range for the TM310, TM310S, and TM310WM models in the JCB service manual (Pub. No. the OEM part reference-07). Note: The TM320 model also starts at this serial number in the same manual; verify specific model applicability with a dealer if the machine is a TM320. |
Frequently asked questions
What engine does the JCB TM310 use?
The standard TM310 uses a 130 hp JCB Dieselmax engine. The TM310S variant uses a 145 hp version of the same 4.4-litre, four-cylinder Dieselmax engine.
What is the operating weight of the JCB TM310?
The operating weight is 8,000 kg (17,637 lb), varying slightly based on tyre specification and attachment package.
What model replaced the JCB TM310?
The JCB TM320 succeeded the TM310 series, sharing the same serial number start point as the OEM part reference.
What TM310 owners discuss
What are the known powertrain and hydraulic behaviors for the JCB TM310 and TM310S?
The TM310 uses a 130 hp JCB Dieselmax engine, while the TM310S uses a 145 hp version of the same 4.4-litre four-cylinder engine. Both models feature a six-speed powershift gearbox with torque lockup in fifth and sixth gears. The TM310S replaced the previous 120-litre/min gear-pump system with a variable displacement swash-plate pump delivering 140-litre/min for faster cycle times. The transmission is prone to major failure around 8,000 hours, often involving bearing shells turning in the housings. Checking the transmission oil filter for a silvery colour indicates internal wear.
What undercarriage or wear patterns are typical for this machine type?
The machine has an operating weight of 8,000 kg (17,637 lb) and an outside turn radius of 4,382 mm (14 ft 3 in). Typical wear includes pin and pivot wear on the boom and carriage. The boom is manufactured from high tensile steel with low maintenance, hard-wearing pads. The articulation angle is ±43 degrees.
What engine quirks are associated with the TM310 series?
The TM310S engine produces 145 hp. Common issues include intermittent misfires and injector problems. A specific fault involves injector number one, where the four tiny pins inside the connector plug may need to be gently prised closer together. The engine is a JCB Dieselmax, with Tier 2 versions being naturally aspirated or turbocharged, and Tier 3 versions being turbocharged with electronic common rail fuel injection.
What are common electrical or sensor issues?
Error codes such as 'T' codes indicate a communications fault between the engine ECU and transmission ECU, causing loss of data on load and engine speed. Code E719 suggests a crank or engine speed sensor issue. Code E083 indicates a dodgy current on injector number one. The service icon may flash, and the machine may not detect error codes if the misfire is intermittent until it fails on all cylinders.
What hydraulic issues are reported for the TM310S Agri?
The boom may fail to retract while other functions operate correctly, with no error codes present. This can be caused by solenoid or control valve issues. Reversing connectors on the valve block can help diagnose if the system attempts to operate in the opposite direction. The hydraulic system relies on a variable displacement pump, and lack of headroom in the cab was addressed by lowering the floor by 80 mm (3 in).
What should be checked when buying a used TM310?
Check the transmission oil filter for a silvery colour to detect bearing wear. Verify the engine type (130 hp for TM310, 145 hp for TM310S). Inspect for pin and pivot wear. Check for error codes related to the crank sensor or injector circuits. Ensure the variable displacement pump is functioning correctly for the TM310S. Verify the machine serial number starts from the OEM part reference for the TM310/TM310S/TM310WM models.
What safety-critical fixes require dealer verification?
Any repair involving the safety check valves fitted to the carriage tilt, telescopic, and boom lift rams must be verified by a dealer. The machine must only be operated with JCB approved attachments. The service brake is power-assisted hydraulic activated, self-adjusted, and oil-immersed in board multi-disc front axle brake. The parking brake is a hand-operated disc brake on the output shaft of the gearbox.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb TM310. Related factory variants of the same model family:
TM310
Need a specific TM310 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.