JCBagriculturalattachments
Jcb SWEEPER
Maintenance schedule, common problems & OEM parts breakdown
The JCB Sweeper is a hydraulic attachment collector designed for mounting on JCB skid steer loaders, 1CX compact excavators, and Loadall telehandlers (525-95 and up). It features a forward-rotating brush with 11-inch diameter steel and polypropylene segments, a floating frame system for ground contouring, and in-cab hydraulic operation for sweeping and hopper emptying. The unit includes a heavy-duty canopy and an optional high-capacity integrated water tank for dust suppression. It is available in configurations with angle brooms or bucket brushes, and dedicated agricultural versions with poly bristles to prevent livestock risk.
The Sweeper collector represents JCB's strategy to expand attachment versatility for compact machinery, allowing operators to maintain forward visibility and safety while cleaning job sites. It differs from standard road sweepers by relying on the carrier machine's hydraulics rather than a dedicated power take-off or engine drive. In the used and parts market, the SC240 and similar models remain relevant due to their simple direct-drive motor design and compatibility with the widespread JCB Loadall and compact excavator fleets. The attachment's modular design allows for easy conversion between steel and poly bristles, extending its utility across construction, municipal, and agricultural sectors.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb SWEEPER specifications
Engine
| Model | Not documented for this specific attachment; the JCB SC240 Sweeper Collector is a hydraulic attachment requiring a carrier machine (e.g., Loadall telehandler, Skid Steer, or 1CX) which provides the power source. |
| Gross/Net Power | Not documented; power requirements are determined by the carrier machine's hydraulic system. |
Weights
| Operating Weight | Not documented in source text. |
| Shipping Weight | Not documented in source text. |
| Ground Pressure | Not documented in source text. |
Dimensions
| Operating Width | 1500 - 2400 mm (4 ft 11 in - 7 ft 10 in) |
| Hopper Capacity | 0.25 - 0.64 m³ (8.8 - 22.6 cu ft) |
| Brush Diameter | 600 mm (1.97 ft) |
Performance
| Travel Speed | Not documented; this is a towed/mounted attachment, not a self-propelled machine. |
| Brush Type | 11-inch diameter steel and polypropylene segments. |
| Operation | Hydraulically operated from the cab for sweeping and hopper emptying; uses one double-acting hydraulic service. |
Service capacities (summary)
| Water Tank | Optional high-capacity integrated water tank for dust suppression. |
| Hydraulic Requirements | Requires carrier machine with sufficient hydraulic flow/pressure; specific capacity not listed for the attachment itself. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb SWEEPER maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the SWEEPER beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor hydraulic fluid condition at the 500-hour interval to detect contamination before brush motor failure. Sample hydraulic oil from the sweeper circuit if equipped with separate return lines. Check the integrated water tank drain bungs for blockage to prevent corrosion and ensure effective dust suppression. Inspect the floating frame pivot points for wear that could reduce brush contact and cleaning efficiency. Verify the condition of the double-acting hydraulic service hose for chafing against the carrier machine's quick-hitch.
Corrective & Common Repairs
Replace worn 11-inch diameter brush segments when steel or polypropylene wear reduces sweeping width. Inspect direct drive motor mounts for vibration damage and loose fasteners. Check the hydraulic opening mechanism for the collection tank hopper to ensure smooth operation. Replace worn pivot pins and bushings on the floating frame to maintain ground contouring. Inspect the heavy-duty canopy for structural integrity after impact with debris or obstacles on site.
Overhaul & Rebuild Points
Rebuild or replace the direct drive motor if torque output drops or hydraulic flow requirements exceed normal parameters. Inspect the brush core adjustment mechanism for wear that prevents proper tensioning of the brush segments. Check the hydraulic cylinder seals for the hopper emptying mechanism to prevent fluid leaks during operation. Evaluate the condition of the brush segment retaining hardware for fatigue cracks. Inspect the quick-hitch interface on the sweeper frame for wear that could cause instability during transport.
Seasonal & Environment Servicing
Flush the water tank and spray system before winter storage to prevent freezing damage and corrosion. Inspect poly bristle brushes for damage if used in agricultural environments with livestock. Check the floating frame for debris buildup that could impede movement in muddy or wet conditions. Lubricate all pivot points more frequently in dusty or abrasive environments to prevent accelerated wear. Verify the condition of the heavy-duty canopy for cracks that could worsen under cold weather stress.
SWEEPER fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Fuel supply restriction, faulty pressure sensor, or rail leak | Check fuel filters and lines for blockage; inspect sensor wiring |
| P0088 | Fuel rail pressure too high | Fuel pressure regulator fault or sensor error | Inspect fuel pressure regulator and sensor circuit |
| P0110 | Intake Air Temperature Sensor 1 Circuit malfunction | Open circuit, short to ground, or faulty sensor | Check sensor connector and wiring harness integrity |
| P0115 | Engine Coolant Temperature Sensor 1 Circuit malfunction | Open circuit, short to ground, or faulty sensor | Check sensor connector and wiring harness integrity |
| P0200 | Injector circuit open | Broken wire, disconnected connector, or failed injector | Visually inspect injector harness and connectors for damage |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Faulty sensor, damaged wiring, or timing issue | Inspect sensor and wiring; verify sensor gap and alignment |
| P0697 | Torque Reduction_Limp Home (Idle Only)_Delayed Engine Stop ECU Internal 5V Supply 2 auxillary fault | ECU internal power supply fault or sensor short | Check 5V reference circuits for shorts; inspect ECU connections |
| P1093 | Common Rail Pressure Fault (Lack of Feed) | Fuel starvation or pump failure | Check fuel tank level, lift pump, and inlet lines |
| P1101 | Rail Pressure Control Error Positive fault | Fuel metering device or pressure control issue | Inspect fuel metering valve and rail pressure sensor |
| P1102 | Rail Pressure Control Error Negative fault | Fuel metering device or pressure control issue | Inspect fuel metering valve and rail pressure sensor |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
SWEEPER attachments & work tools
Sweeper Collector SC150
Designed for 1CX and 1CXT telehandlers, this model features an operating width of 1525 mm (60 in) and a hopper capacity of 0.46 m³ (0.6 yd³). It utilizes a heavy-duty canopy and 300 mm diameter steel and polypropylene brush segments. The unit operates via a single double-acting hydraulic service for both brush drive and hopper opening.
Sweeper Collector SC210
Configured for 2CX backhoe loaders, this attachment has an operating width of 2100 mm (83 in) and a hopper capacity of 0.25 m³ (0.33 yd³). It mounts using a 2CX Quickhitch MkII pick-up and includes a floating frame system to follow ground contours. An optional sprinkler kit is available for dust suppression.
Sweeper Collector SC240
Intended for 3CX, 4CX, and 5CX backhoe loaders, this model provides an operating width of 2400 mm (95 in) and a hopper capacity of 0.32 m³ (0.42 yd³). It requires a mounting frame and 5/8 in loader auxiliary pipework for continuous hydraulic operation. Mounting frame options include quickhitch, pallet forks, or Q-fit agricultural quickhitch.
Sweeper Collector SC240 (Loadall)
Suitable for Loadall 525-95 and up, this variant shares the 2400 mm operating width and 0.32 m³ hopper capacity of the backhoe version. It utilizes direct drive motors to deliver torque for the brush and large capacity bucket. In-cab operation controls sweeping and hopper emptying to maximize productivity.
Mounting and Coupler Systems
Compatibility includes quick hitch plates for forklifts, teletrucks, skid steers, and compact loading shovels. Fork fixing sleeves allow direct mounting on any forklift. Specific models require dedicated mounting frames or quickhitch adapters, such as the 2CX Quickhitch MkII or Q-fit agricultural quickhitch.
Operational Options and Guarding
Available options include left-hand or right-hand gutter brushes and dust suppression sprinkler kits. The sweeper features a forward-rotating brush design for operator safety and visibility. A removable drain bung allows for easy cleaning and emptying of the optional high-capacity integrated water tank.
All SWEEPER assemblies by section
Every catalogued assembly group for the Jcb SWEEPER. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments, L
A1-2-3 Fork, Grab, Wastemaster
| 33***55 | Grab, Left Side | 1 |
| 33***58 | Grab, Right Side | 1 |
| 33***60 | Pin, Rod End | 2 |
A1-1-1 Sideshift Bucket, 3cx Not Scout Engine, 980/89975
| 98***75 | Bucket, Tilting 0.16m | 1 |
A1-2-2 Bucket, Grab, 980/A1004
| 33***39 | Pin, Ram Pivot | 2 |
| 33***40 | Grab, Assembly | 1 |
| 33***41 | Pin, Rod Pivot | 2 |
A1-1-2 Sideshift Bucket, 801.7 M800000 On, 980/89972
| 33***76 | Standard Attachment | 1 |
| 33***84 | Kit, Tilting Device | 1 |
| 33***85 | Bucket, Tilting | 1 |
A1-2-1 Refuse Bucket & Grab, 2.43m 1250kg, Loadall Quickfit
| 33***85 | Grab, Assembly. R/H | 1 |
| 33***87 | Grab, Assembly. L/H | 1 |
| 33***88 | Toeplate, Kit 3 Piece | 1 |
A2-5-1 Drillmaster 1200, 980/A1794, Fits Robot 150-170
| 13***13 | Bolt | 1 |
| 13***03 | Nut | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A2-6-1 Drillmaster 1200, 980/A1795, Fits 802/3/4
| 13***13 | Bolt | 1 |
| 13***03 | Nut | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A2-3-1 Drillmaster 1650, 980/A1792, Fits Robot 185-1110
| 13***13 | Bolt | 1 |
| 13***03 | Nut | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A2-4-1 Drillmaster 1650, 980/A1793, Loadall & Bhl Q/Fit Frame
| 13***13 | Bolt | 1 |
| 13***03 | Nut | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A2-5-2 332/A1781, Powerhead
| 33***81 | Drive, Head | 1 |
| 33***08 | Clamp, Assembly | 1 |
| 33***09 | Pin, . | 1 |
A2-1-1 Drillmaster 750, 980/A1789, Fits 801
| 13***13 | Bolt | 1 |
| 13***03 | Nut | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A2-1-2 332/A1779, Powerhead
| 33***79 | Drive, Head | 1 |
| 33***14 | Motor, Hydraulic | 1 |
| 33***12 | Key, . | 1 |
A2-3-2 332/A1780, Powerhead
| 33***81 | Drive, Head | 1 |
| 33***08 | Clamp, Assembly | 1 |
| 33***09 | Pin, . | 1 |
A2-2-1 Drillmaster 750, 980/A1791, Fits 803
| 13***13 | Bolt | 1 |
| 13***03 | Nut | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A3-35-4 Ground Preperation, Rake 980/90545, Caster Wheel
| 33***69 | Bolt, . | 1 |
| 33***72 | Shaft, . | 1 |
| 33***81 | Spacer, Long | 1 |
A3-35-45 Hydraulic Rotator
| 20***75 | Shim | 1 |
| 20***76 | Washer | 1 |
| 20***77 | Pin, Wedge | 1 |
A3-35-1 Ground Preperation, Rake 980/90545
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 16***06 | Adapter, 3/4" Bsp M/M | 3 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-21-5 Kerbgrab, Manual, 180 Kg Swl
| 98***44 | Attachment, Manual Kerbgrab Base, 70kgswl | 1 |
| 98***24 | Grab, Kerb 180kgswl, Manual Rotation | 1 |
| 98***32 | Body | 1 |
A3-35-3 Ground Preperation, Rake 980/90545, Roller Frame
| 33***74 | Washer, . | 1 |
| 33***75 | Roller, Toothed | 1 |
| 33***77 | Frame, . | 1 |
A3-1-2 Quickhitch 802/3/4, M732001 On, 980/89974
| 98***74 | Quickhitch | 1 |
A3-35-40 Kerbgrab
| 13***3D | Nut, Self Lock M10 | 3 |
| 13***5D | Capscrew, M10 X 20 | 3 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
A3-35-2 Ground Preperation, Rake 980/90545, Main Assembly
| 33***86 | Mounting, . | 1 |
| 33***88 | Strap, . | 2 |
| 33***89 | Washer, . | 1 |
A3-21-1 Kerbgrab, Manual, 180 Kg Swl
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***4D | Washer | 2 |
| 16***04 | Adapter | 2 |
A3-1-3 Solenoid Valve, Adapters And Seals, Hydraulic Quickhitch
| 33***32 | Seal, Dowty, Use With 33***07/8 | 1 |
| 33***86 | Adapter, . | 1 |
| 33***87 | Adapter, With Seal | 1 |
A3-1-1 Quickhitch 8014, M791000 On, 980/89973
| 98***73 | Quickhitch | 1 |
A4-28-10 Breaker, Hammermaster 100
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***04 | Adapter, Male/Male | 2 |
A4-25-1 Breaker, Hammermaster 770
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
| 81***51 | Decal | 2 |
A4-50-2 Breaker, Hm 25 Mbw
| 92***00 | Breaker, Hm 25 Mbw | 1 |
A4-1-6 Breaker, Hm 29 30ltr/Min Usa
| 13***1Z | Capscrew, M5x45 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A4-27-1 Breaker, Hammermaster Lh500, With Side Plates
| 13***0Z | Bolt, M20 X 100mm | 8 |
| 13***6Z | Bolt | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A4-21-4 Breaker, Hammermaster 160q, Robot 150/160/165/170/180/190/1110
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
| 16***09 | Adapter, Reducing | 2 |
A4-14-6 Breaker, Hammermaster 260, With Side Plates
| 12***41 | Spacer | 1 |
| 12***21 | Spacer | 2 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 1 |
A4-3-2 Breaker, Hm2180, 980/90570
| 33***55 | Cylinder, Hm2180 Spare Cylinde | 1 |
| 33***57 | Seal, Dust | 1 |
| 33***58 | Packing, Ring | 1 |
A4-31-20 Breaker, Hammermaster 850, Tools
| 90***01 | Tool, Chisel H850 | 1 |
| 90***02 | Tool, Moil H850 | 1 |
A4-50-11 Breaker, Hm29, 1-1/4" Shank, 20 Litre 929/92700
| 13***2Z | Screw, Cap, M5 X 50mm; Replaces Aev0030, San 12455 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
A4-16-6 Breaker, Hammermaster 460-110, Swivel Coupling
| 90***16 | Plug | 2 |
| 98***02 | Bolt, Banjo | 2 |
| 98***03 | Body, Swivel Couping, 3/4"Bsp | 1 |
A4-1-2 Breaker, Brh 40 Wit, H Side Plates
| 13***42 | Bolt | 4 |
| 13***46 | Bolt | 4 |
| 13***03 | Nut | 8 |
A4-14-35 Breaker, Hammermaster 260q
| 13***6Z | Bolt | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***26 | Washer, Seal | 1 |
A4-16-2 Breaker, Hammermaster 460, Tools
| 90***01 | Tool, Chisel (Transverse), 780 Long X 90mm Dia | 1 |
| 90***02 | Tool, Moil Point, 780 Long X 90mm Dia | 1 |
| 90***03 | Tool, Chisel (Parallel), 780 Long X 90mm Dia | 1 |
A4-16-4 Breaker, Hammermaster 460, Swivel Coupling
| 90***16 | Plug | 2 |
| 98***02 | Bolt, Banjo | 2 |
| 98***03 | Body, Swivel Couping, 3/4"Bsp | 1 |
A4-11-1 Breaker, Hammermaste, R 690
| 90***45 | Plug | 1 |
| 90***46 | O Ring | 1 |
| 90***10 | O Ring | 4 |
A4-14-50 Breaker, Hammermaster 260uq
| 13***6Z | Bolt, M20 X 70 | 12 |
| 13***1Z | Nut | 12 |
| 13***9Z | Capscrew | 6 |
A4-50-6 Breaker, Hm22 Usa Mbw
| 92***00 | Breaker, Hm 22 Usa Mbw, 1 In. X 4 -1_4in. | 1 |
| 92***00 | Breaker, Hm 22 | 1 |
A4-15-9 Breaker, Hammermaster 360qu, Housing Unit
| 82***34 | Bolt | 12 |
| 82***35 | Nut | 12 |
| 90***48 | Buffer | 2 |
A4-4-1 Breaker, Brh 90
| 90***23 | Pin, Locking | 2 |
| 90***24 | Spring | 2 |
| 90***25 | Nipple, Grease | 1 |
A4-1-16 Kit, Rockbreaker, 3/4 Return, 215pc3 15ft.Ext Dipper M906028 Onwards
| 12***01 | Guide | 2 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 7 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 1 |
A4-1-5 Breaker, Hm 22 Usa
| 13***1Z | Capscrew, M5x45 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A4-23-1 Breaker, Hammermaster 570
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
| 81***49 | Decal, Hm570 | 2 |
A4-33-10 Breaker, Hammermaster 110, Power Cell Only, 980/89461
| 82***02 | Washer | 1 |
| 90***01 | Washer, Ss10 | 20 |
| 90***02 | Screw, M10 X 25 | 20 |
A4-1-13 Kit, Rockbreaker, 3/4 Return, 214pc111 14ft.Ext Dipper M906028 Onwards
| 12***01 | Guide | 2 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 1 |
A4-1-10 Breaker, Hammermaster 60
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***04 | Adapter, Male/Male | 1 |
A4-30-10 Breaker, Hm 550
| 13***14 | Capscrew | 4 |
| 13***16 | Capscrew | 12 |
| 13***19 | Capscrew, M16x90, Grade 12.9 | 12 |
A4-14-8 Breaker, Hammermaster 260 Mk2, With Side Plates
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***26 | Washer, Seal | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
A4-32-1 Breaker, Hammermaster 60, Complete, 980/89484
| 13***2Z | Bolt; Replaces 60***2r | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A4-14-10 Breaker, Hammermaster 260l, With Side Plates. 2cx
| 13***6Z | Bolt | 14 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
A4-50-4 Breaker, Hm 29 Usa
| 92***00 | Breaker, Hm 29 Usa | 1 |
| 92***00 | Breaker, Hm 29 Usa 20ltr | 1 |
A4-14-20 Breaker, Hammermaster 260, Installation, Robot 185
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 6 |
| 14***26 | Washer, Seal | 2 |
A4-24-1 Breaker, Hammermaster 670
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
| 81***50 | Decal, Hm670 | 2 |
A4-25-2 Breaker, Hammermaster 770, Tools
| 90***01 | Tool, Chisel, 1100mm Long | 1 |
| 90***02 | Tool, Moil, 1100mm Long | 1 |
| 90***03 | Tool, Blunt, 900mm Long | 1 |
A4-23-10 Breaker, Hammermaster 570, Installation
| 14***26 | Washer, Seal | 2 |
| 16***08 | Adapter | 2 |
| 61***00 | Hose, 1990mm | 2 |
A4-65-10 Hm65 Breaker, Powercell Components
| 14***08 | Seal, Washer | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
A4-9-1 Breaker, Brh 620
| 82***66 | Washer | 12 |
| 90***07 | O Ring | 2 |
| 90***25 | Nipple, Grease | 1 |
A4-1-25 Breaker, Hm25, 1-1/4" Shank, 929/92400j
| 13***2Z | Screw, Cap, M5 X 50mm; Replaces Aev0030, San 12455 | 4 |
| 13***19 | Capscrew | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
A4-5-1 Breaker, Brh 91, (Old 280)
| 90***23 | Pin, Locking | 2 |
| 90***24 | Spring | 2 |
| 90***25 | Nipple, Grease | 1 |
A4-19-2 Breaker, Hammermaster 860, Tools
| 90***01 | Tool, Blunt Chisel, 1050mm X 140mm Dia | 1 |
| 90***03 | Tool, Chisel, 1050mm X 140mm Dia | 1 |
A4-52-1 929/A2613, Hm25 Lv Breaker
| 13***8D | Capscrew, M5 X 30 Long, Grade 12.9 | 2 |
| 13***9D | Capscrew | 4 |
| 13***3Z | Screw, M5 X 55, Shcs | 4 |
A4-1-11 Breaker, Hammermaster 110
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 40***19 | Cartridge, Grease, Hammer P64; Replaced By 40***07, See San 12358 | 1 |
A4-1-12 Kit, Rockbreaker, (Ams)
| 13***1Z | Screw, Hex Head, M8 X 12 | 4 |
| 13***7D | Setscrew, M12 X 25 | 4 |
| 13***9D | Screw, M12x35mm Long | 4 |
A4-7-1 Breaker, Brh 250
| 16***18 | Adapter | 1 |
| 81***44 | Adapter | 1 |
| 82***56 | Washer, Self Lock | 4 |
A4-14-36 Breaker, Hammermaster 260q, Housing Unit
| 90***48 | Buffer | 1 |
| 90***35 | Washer, Lock | 6 |
| 98***04 | Pin, Roll | 1 |
A4-15-6 Breaker, Hammermaster 360-70, Swivel Coupling
| 90***16 | Plug | 2 |
| 98***02 | Bolt, Banjo | 2 |
| 98***03 | Body, Swivel Couping, 3/4"Bsp | 1 |
A4-33-1 Breaker, Hammermaster 110, Complete, 980/89456
| 13***4Z | Bolt, M16x60 | 8 |
| 13***9Z | Bolt | 2 |
| 13***1Z | Nut | 2 |
A4-21-8 Breaker, Hammermaster 160r
| 13***2Z | Bolt; Replaces 60***2r | 12 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A4-15-2 Breaker, Hammermaster 360, Tools
| 90***01 | Tool, Chisel (Transverse), 730 Long X 70mm Dia | 1 |
| 90***02 | Tool, Moil Point, 730 Long X 70mm Dia | 1 |
| 90***03 | Tool, Chisel, 830 Long X 70mm Dia | 1 |
A4-30-2 Breaker, Hammermaster 550, With Side Plates C/W Hoses 980/88303
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***26 | Washer, Seal | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
A4-32-10 Breaker, Hammermaster 60, Power Cell Only,980/89498
| 33***49 | Flange, Spool | 1 |
| 33***52 | Housing, Spool | 1 |
| 33***53 | Cap, Protective | 2 |
A4-31-1 Breaker, Hammermaster 850, With Side Plates 980/88605
| 40***19 | Cartridge, Grease, Hammer P64; Replaced By 40***07, See San 12358 | 1 |
| 81***92 | Label | 1 |
| 81***27 | Decal, Warning | 1 |
A4-15-20 Breaker, Hammermaster 360uq
| 13***9Z | Capscrew | 6 |
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
A4-1-4 Breaker, Hm 25 Usa
| 13***1Z | Capscrew, M5x45 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A4-30-20 Breaker, Hammermaster 550, Swivel Coupling
| 90***16 | Plug | 2 |
| 98***02 | Bolt, Banjo | 2 |
| 98***03 | Body, Swivel Couping, 3/4"Bsp | 1 |
A4-15-1 Breaker, Hammermaster 360, With Side Plates
| 13***6Z | Bolt | 4 |
| 13***19 | Bolt | 8 |
| 13***34 | Bolt | 2 |
A4-40-2 Charging Tool
| 89***23 | Tool, Accum. Filling | 1 |
| 89***89 | O Ring | 2 |
| 89***08 | Adapter, Charging Tool | 1 |
A4-6-2 Breaker, Brh 125 Wit, H Side Plates
| 10***51 | Spacer | 2 |
| 12***00 | Kit-Installation, Brh125 Breaker | 1 |
| 12***00 | Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., For Use On Normal Backhoe. Part Is Mss Use The Following Parts Marked B , Ie 1 Left Hand, 1 Right Hand Plate. | 1 |
A4-1-9 Breaker, Hm 29 20ltr/Min Usa
| 13***1Z | Capscrew, M5x45 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A4-17-2 Breaker, Hammermaster 660, Tools
| 90***02 | Tool, Blunt, 1050 Long 118mm Dia | 1 |
| 90***03 | Tool, Moil Point, 1050 Long 118mm Dia | 1 |
A4-14-4 Breaker, Hammermaster 260, Circuit
| 12***58 | Pipe, Right Hand | 1 |
| 12***59 | Pipe, Left Hand | 1 |
| 13***2Z | Bolt | 2 |
A4-50-5 Breaker, Hm 29 Usa 30 Ltr
| 92***00 | Breaker, Hm 29 30ltr | 1 |
A4-22-2 Breaker, Hammermaster 560, Tools
| 90***01 | Tool, Blunt, 115mm Diax850mm Long | 1 |
| 90***02 | Tool, Moil, 115mm Diax850mm Long | 1 |
A4-1-7 Breaker, Hm 29 30ltr/Min Usa, Mbw
| 13***1Z | Capscrew, M5x45 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A4-51-10 Breaker, Hammermaster 115, With Side Plates 980/90183 Jcb1cx
| 13***8Z | Bolt, M20 X 180mm Long | 6 |
| 13***0Z | Bolt, M20 X 200 | 7 |
| 13***1Z | Nut | 8 |
A4-7-1 Breaker, Hammermaste, R 480
| 16***18 | Adapter | 1 |
| 81***44 | Adapter | 1 |
| 82***56 | Washer, Self Lock | 4 |
A4-14-30 Breaker, Hammermaster 260lq
| 13***6Z | Bolt | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A4-1-14 Kit, Rockbreaker, Bhl 214 & 214e, M903000 On
| 12***86 | Ring, Support | 1 |
| 12***87 | Mounting, Hook Clamp | 1 |
| 12***88 | Hook, 4" Spring | 1 |
A4-14-1 Breaker, Hammermaster 260
| 13***10 | Capscrew | 4 |
| 13***14 | Capscrew | 4 |
| 13***16 | Capscrew | 4 |
A4-12-1 Breaker, Brh1100
| 90***07 | O Ring | 2 |
| 90***25 | Nipple, Grease | 1 |
| 90***05 | Washer, Nylon | 1 |
A4-31-10 Breaker, Hammermaster 850
| 90***10 | Plug, Filler | 1 |
| 90***11 | Seal | 2 |
| 90***18 | Plug | 1 |
A4-21-2 Breaker, Hammermaster 160q, Tools
| 90***01 | Tool, Moil, 560mm X 45mm Dia | 1 |
| 90***02 | Tool, Chisel, 480mm X 45mm Dia | 1 |
| 90***03 | Tool, Parallel Spade, 450mm X 45mm Dia | 1 |
A4-20-2 Breaker, Hammermaster 960, Tools
| 90***02 | Tool, Moil, 1200mm X 160mm Dia | 1 |
| 90***03 | Tool, Chisel, 1200mm X 160mm Dia | 1 |
A4-15-7 Breaker, Hammermaster 360q
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***26 | Washer, Seal | 1 |
| 14***02 | Nipple, Grease, 1/4" Bsp 90deg. | 4 |
A4-30-1 Breaker, Hammermaster 550, With Side Plates 980/88459
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 40***19 | Cartridge, Grease, Hammer P64; Replaced By 40***07, See San 12358 | 1 |
| 81***92 | Label | 1 |
A4-21-5 Breaker, Hammermaster 160
| 13***2Z | Bolt; Replaces 60***2r | 12 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A4-16-3 Breaker, Hammermaster 460
| 13***14 | Capscrew | 8 |
| 13***19 | Capscrew, M16x90, Grade 12.9 | 8 |
| 90***10 | Plug, Filler | 2 |
A4-17-1 Breaker, Hammermaster 660
| 13***1Z | Bolt; Replaces 60***21 San 13642 | 14 |
| 13***3Z | Nut, Self Locking | 14 |
| 14***4Z | Washer | 28 |
A4-14-11 Breaker, Hammermaster 260l, With Side Plates. 804
| 13***6Z | Bolt | 10 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
A4-50-3 Breaker, Hm 22 Usa
| 92***00 | Breaker, Hm 22 Usa | 1 |
| 92***00 | Breaker, Hm 22 Usa | 1 |
A4-15-8 Breaker, Hammermaster 360q, Housing Unit
| 90***48 | Buffer | 2 |
| 90***35 | Washer, Lock | 6 |
| 98***04 | Pin, Roll | 2 |
A4-21-6 Breaker, Hammermaster 160q, 802
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***04 | Adapter, Male/Male | 1 |
A4-29-10 Breaker, Hammermaster 100q
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***04 | Adapter, Male/Male | 2 |
A4-28-2 Breaker, Hammermaster 100, With Side Plates 980/88271
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 6 |
| 13***1Z | Nut | 6 |
| 40***19 | Cartridge, Grease, Hammer P64; Replaced By 40***07, See San 12358 | 1 |
A4-15-5 Breaker, Hammermaster 360-70, With Side Plates
| 13***4Z | Bolt | 4 |
| 13***0Z | Bolt | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A4-15-10 Breaker, Hammermaster 360u, With Side Plates
| 13***6Z | Bolt | 12 |
| 13***9Z | Bolt | 8 |
| 13***1Z | Nut | 12 |
A4-1-15 Kit, Rockbreaker, Bhl 215 & 217, M903000 On
| 12***87 | Mounting, Hook Clamp | 1 |
| 12***88 | Hook, 4" Spring | 1 |
| 12***94 | Ring, Support | 1 |
A4-14-40 Breaker, Hammermaster 260u, With Side Plates
| 13***6Z | Bolt | 8 |
| 13***6Z | Bolt | 12 |
| 13***1Z | Nut | 12 |
A4-1-1 Breaker, Hammermaste, R 120
| 90***23 | Pin, Locking | 2 |
| 90***24 | Spring | 2 |
| 90***25 | Nipple, Grease | 1 |
A4-1-3 Breaker, Hammermaste, R 120 + Plates
| 23***00 | Kit, Tail Hose, Pivot Pins | 1 |
| 98***00 | Breaker, Assembly, Jcb801 | 1 |
| 98***00 | Breaker, Assembly, Hammermaster 160; Replaced By 98***50 | 1 |
A4-16-1 Breaker, Hammermaster 460, With Side Plates
| 13***6Z | Bolt | 4 |
| 13***0Z | Bolt, M30 X 100mm | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A4-65-3 Hm65 Breaker, Assembly, 980/90866
| 13***5Z | Bolt | 4 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 3 |
| 13***1Z | Nut | 4 |
A4-15-3 Breaker, Hammermaster 360
| 13***14 | Capscrew | 4 |
| 13***16 | Capscrew | 12 |
| 13***19 | Capscrew, M16x90, Grade 12.9 | 12 |
A4-10-1 Breaker, Brh 750
| 90***07 | O Ring | 2 |
| 90***25 | Nipple, Grease | 1 |
| 90***05 | Washer, Nylon | 1 |
A4-21-3 Breaker, Hammermaster 160q, 803
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***04 | Adapter, Male/Male | 1 |
A4-51-1 Breaker, Hammermaster 115
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***04 | Adapter, Male/Male | 2 |
A4-23-2 Breaker, Hammermaster 570
| 90***01 | Tool, Chisel Point | 1 |
| 90***02 | Tool, Moil Point | 1 |
| 90***64 | Tool, Blunt Steel, 1050 | 1 |
A4-6-4 Breaker, Brh 125 Wit, H Side Plates, 802
| 10***51 | Spacer | 6 |
| 13***52 | Bolt | 6 |
| 13***01 | Nut | 6 |
A4-13-1 Breaker, Hammermaster 630
| 90***05 | Washer, Nylon | 1 |
| 90***06 | O Ring | 1 |
| 90***07 | O Ring | 2 |
A4-26-1 Breaker, Hammermaster 70
| 13***2Z | Bolt; Replaces 60***2r | 12 |
| 90***49 | Washer, Lock | 12 |
| 90***00 | Breaker, Hammermaster 70 | 1 |
A4-3-1 Breaker, Brh 76
| 90***23 | Pin, Locking | 2 |
| 90***24 | Spring | 2 |
| 90***25 | Nipple, Grease | 1 |
A4-2-1 Breaker, Brh 75
| 90***23 | Pin, Locking | 2 |
| 90***24 | Spring | 2 |
| 90***25 | Nipple, Grease | 1 |
A4-16-5 Breaker, Hammermaster 460-110
| 13***2Z | Bolt | 12 |
| 13***6Z | Bolt | 4 |
| 40***09 | Cartridge, Grease | 1 |
A4-50-7 Breaker, Hm 29 Usa Mbw
| 92***00 | Breaker, Hm 29 Mbw | 1 |
| 92***00 | Breaker, Hm 29 Usa 20ltr | 1 |
A4-1-8 Breaker, Hm 29 20ltr/Min Usa, Mbw
| 13***1Z | Capscrew, M5x45 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A4-50-1 Breaker, Hm 25 Usa
| 92***00 | Breaker, Hm 25 Usa | 1 |
A4-19-3 Breaker, Hammermaster 860, Installation, Js300
| 61***00 | Hose, Inlet | 1 |
| 61***00 | Hose, Outlet | 1 |
| 81***27 | Adapter | 1 |
A4-22-10 Breaker, Hammermaster 560, Installation
| 61***00 | Hose; Replaced By 62***26 + 16***12, 16***08,, & 14***26 X2. See San 12358 | 1 |
| 61***00 | Hose | 1 |
| 61***00 | Hose | 1 |
A4-1-3 Breaker, Brh 40 Wit, H Side Plates
| 23***00 | Kit, Tail Hose, Pivot Pins | 1 |
| 98***00 | Breaker, Assembly, Jcb801 | 1 |
| 98***00 | Breaker, Assembly, Hammermaster 160; Replaced By 98***50 | 1 |
A4-14-21 Breaker, Hammermaster 260, Robot 185
| 13***6Z | Bolt | 12 |
| 82***79 | Clip, 'R' | 1 |
| 90***48 | Buffer | 1 |
A4-6-3 Breaker, Brh 125, With Side Plates, Universal
| 10***51 | Spacer | 2 |
| 13***52 | Bolt | 6 |
| 13***01 | Nut | 6 |
A4-14-5 Breaker, Hammermaster 260, Swivel Coupling
| 90***64 | Ring, Support | 2 |
| 90***65 | Ring, Retaining | 2 |
| 90***37 | Plug | 2 |
A4-8-1 Breaker, Brh 501
| 13***4Z | Bolt, M20 X 60mm | 12 |
| 82***66 | Washer | 24 |
| 90***07 | O Ring | 2 |
A4-21-1 Breaker, Hammermaster 160q
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
| 81***27 | Decal, Warning | 2 |
A4-24-10 Breaker, Hammermaster 670, Installation
| 61***00 | Hose, 1990mm | 1 |
| 63***00 | Hose | 1 |
| 98***00 | Kit-Breaker, Hammermaster 670, None Jcb Machines. | 1 |
A4-14-2 Breaker, Hammermaster 260, Tools
| 90***01 | Tool, Moil Point | 1 |
| 90***02 | Tool, Chisel | 1 |
| 90***03 | Tool, Chisel, 780mm Long | 1 |
A4-40-1 Charging Tool
| 81***36 | Adapter, Charging Tool; Replaced By 89***08, See San 10844 | 1 |
A4-26-20 Breaker, Hammermaster 70, 1cx
| 13***2Z | Bolt; Replaces 60***2r | 8 |
| 13***4Z | Bolt; Replaces 60***14 | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A4-14-7 Breaker, Hammermaster 260 Mk2
| 14***02 | Nipple, Grease, Straight, 1/4 | 1 |
| 90***10 | Plug, Filler | 2 |
| 90***11 | Seal | 2 |
A4-21-10 Breaker, Hammermaster 160q, 1cx
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 16***04 | Adapter, Male/Male | 1 |
| 16***09 | Adapter, Reducing | 2 |
A4-31-30 Breaker, Hammermaster 850, Installation, Js130 Wheeled
| 14***26 | Washer, Seal | 2 |
| 16***08 | Adapter | 1 |
| 16***12 | Adapter | 1 |
A4-29-1 Breaker, Hammermaster 100q, With Side Plates 980/88320
| 13***7Z | Bolt | 6 |
| 13***3Z | Nut, M20 | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A4-28-1 Breaker, Hammermaster 100, With Side Plates 980/88200
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 6 |
| 13***1Z | Nut | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A4-6-1 Breaker, Brh 125, (Old 380)
| 90***00 | Breaker, Hydraulic | 1 |
| 90***01 | Screw | 10 |
| 90***02 | Accumulator, Assembly | 1 |
A4-19-1 Breaker, Hammermaster 860
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
| 81***27 | Decal, Warning | 1 |
A4-50-10 Breaker, Hm29, 1-1/4" Shank, 30 Litre 929/92900
| 13***1Z | Capscrew, M5x45 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
A4-18-2 Breaker, Hammermaster 760, Tools
| 90***02 | Tool, Moil Point, 900 Long 130mm Dia | 1 |
| 90***03 | Tool, Chisel, 900 Long 130mm Dia | 1 |
A4-22-1 Breaker, Hammermaster 560
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
| 81***27 | Decal, Warning | 1 |
A4-21-9 Breaker, Hammermaster 160u
| 13***16 | Capscrew | 6 |
| 40***19 | Cartridge, Grease, Hammer P64; Replaced By 40***07, See San 12358 | 1 |
| 81***92 | Label | 1 |
A4-50-8 Breaker, Hm 29 Usa 30ltr
| 92***00 | Breaker, Hm 29 Usa 30ltr (30 | 1 |
| 92***00 | Breaker, Hmm 29 Usa 30ltr | 1 |
A4-11-1 Breaker, Brv 32
| 90***45 | Plug | 1 |
| 90***46 | O Ring | 1 |
| 90***10 | O Ring | 4 |
A4-21-7 Breaker, Hammermaster 160q, 1cx
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 16***04 | Adapter, Male/Male | 1 |
| 16***09 | Adapter, Reducing | 2 |
A4-6-2 Breaker, Hammermaste, R Jcb 380 + Plates
| 10***51 | Spacer | 2 |
| 12***00 | Kit-Installation, Brh125 Breaker | 1 |
| 12***00 | Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., For Use On Normal Backhoe. Part Is Mss Use The Following Parts Marked B , Ie 1 Left Hand, 1 Right Hand Plate. | 1 |
A4-20-1 Breaker, Hammermaster 960
| 13***10 | Capscrew | 4 |
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
A4-27-10 Breaker, Hammermaster Lh500
| 90***01 | Washer, Ss10 | 12 |
| 90***02 | Screw, M10 X 25 | 12 |
| 90***06 | Seal, Ring 8 X 12 | 2 |
A4-26-10 Breaker, Hammermaster 70
| 13***2Z | Bolt; Replaces 60***2r | 12 |
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
A4-14-12 Breaker, Hammermaster 260l, Swivel Coupling, 2cx
| 90***64 | Ring, Support | 2 |
| 90***65 | Ring, Retaining | 2 |
| 90***16 | Plug | 2 |
A4-15-4 Breaker, Hammermaster 360, Swivel Coupling
| 90***16 | Plug | 2 |
| 98***00 | Coupling, Swivel | 1 |
| 98***01 | Manifold | 1 |
A4-28-20 Breaker, Hammermaster 100, With Side Plates 980/89151 Jcb1cx
| 13***8Z | Bolt, M20 X 180mm Long | 6 |
| 13***0Z | Bolt, M20 X 200 | 2 |
| 13***1Z | Nut | 8 |
A4-14-3 Breaker, Hammermaster 260, With Side Plates
| 12***38 | Plate, Side, Right Hand | 1 |
| 12***39 | Plate, Side, Left Hand | 1 |
| 12***41 | Spacer | 1 |
A4-14-9 Breaker, Hammermaster 260l, With Side Plates
| 13***9Z | Bolt | 4 |
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***1Z | Nut, M24 | 4 |
A4-1-1 Breaker, Brh 40
| 90***23 | Pin, Locking | 2 |
| 90***24 | Spring | 2 |
| 90***25 | Nipple, Grease | 1 |
A4-31-31 Breaker, Hammermaster 850, Installation, Js130 Tracked
| 61***00 | Hose; Replaced By 62***26 + 16***12, 16***08,, & 14***26 X2. See San 12358 | 1 |
| 61***00 | Hose | 1 |
| 81***22 | Decal, Hm850 | 2 |
A4-23-20 Breaker, Hammermaster 570, Installation, Js130
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***26 | Washer, Seal | 1 |
| 16***08 | Adapter | 1 |
A4-18-1 Breaker, Hammermaster 760
| 40***09 | Cartridge, Grease | 1 |
| 81***92 | Label | 1 |
| 81***27 | Decal, Warning | 1 |
A4-65-1 Hm65 Breaker, Assembly, 980/90205
| 13***5Z | Bolt | 4 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
| 13***1Z | Nut | 4 |
A5-1-7 Hammermaster, Js330 Croatia
| 13***1Z | Capscrew, M14 | 16 |
| 33***47 | Breaker | 1 |
| 33***62 | Bracket, Hm2950 Hanger, Js330 | 1 |
A5-4-10 Breaker, Hammermaster 1750q
| 81***76 | Decal, Hm1750q | 2 |
| 90***49 | Washer, Locking | 8 |
| 90***51 | Bolt | 4 |
A5-6-1 Breaker, Hammermaster 3850, Hm3850q
| 13***6Z | Bolt; Replaces 60***16 | 12 |
| 40***07 | Grease, Cartridge, 400g | 1 |
| 81***92 | Label | 1 |
A5-6-30 Breaker, Hm1750, Installation, Js450 Tracked
| 14***29 | Seal, Dowty | 2 |
| 16***09 | Adapter | 2 |
| 33***64 | Bracket, Hanger, 3850 Breaker | 1 |
A5-4-1 Breaker, Hammermaster 1750
| 40***07 | Grease, Cartridge, 400g | 1 |
| 81***92 | Label | 1 |
| 81***27 | Decal, Warning | 1 |
A5-4-35 Breaker, Hammermaster 1750, Js240/260
| 13***1Z | Capscrew, M14 | 8 |
| 33***90 | Tool, Moil Point Hard Rock | 1 |
| 40***07 | Grease, Cartridge, 400g | 1 |
A5-1-32 Breaker, Hm1050, Installation, Js130 Auto Tracked M1058102 On
| 13***0Z | Capscrew, M12x40 | 8 |
| 21***01 | Clamp, Flange 1" | 4 |
| 40***07 | Grease, Cartridge, 400g | 1 |
A5-8-1 Breaker, Hammermaster 3950
| 13***1Z | Capscrew, M14 | 8 |
| 33***56 | Tool, Chisel Hard Rock | 1 |
| 40***07 | Grease, Cartridge, 400g | 1 |
A5-3-2 Breaker, Hammermaster 2350
| 13***10 | Capscrew | 2 |
| 40***07 | Grease, Cartridge, 400g | 1 |
| 81***61 | Decal, Greasing | 2 |
A5-5-17 Breaker, Hammermaster 2950, Js450/460
| 13***1Z | Capscrew, M14 | 8 |
| 33***64 | Bracket, Hanger, 3850 Breaker | 1 |
| 33***47 | Breaker | 1 |
A5-1-40 Breaker, Hm1050, Installation, Js150 Tracked
| 14***26 | Washer, Seal | 2 |
| 16***08 | Adapter | 2 |
| 61***00 | Hose, 1990mm | 2 |
A5-9-10 Breaker, Hammermaster 1150
| 33***34 | Housing | 1 |
| 81***93 | Decal | 2 |
| 90***49 | Washer, Locking | 8 |
A5-1-6 Hammermaster, Js130 Croatia
| 13***0Z | Capscrew, M12x40 | 8 |
| 21***01 | Clamp, Flange 1" | 4 |
| 33***87 | Tool, Hard Rock Moil | 4 |
A5-1-1 Breaker, Hammermaster 1050
| 13***10 | Capscrew | 8 |
| 40***07 | Grease, Cartridge, 400g | 1 |
| 81***92 | Label | 1 |
A5-9-18 Breaker, Hammermaster 1150, Righthand Feed Non Jcb
| 13***0Z | Capscrew, M12x40 | 8 |
| 21***01 | Clamp, Flange 1" | 4 |
| 33***66 | Tool, Hard Rock Moil Point, Hm 1150 | 1 |
A5-3-20 Tools, Hammermaster 2350, 2350q
| 33***91 | Tool, Moil Point Hard Rock | 1 |
| 90***01 | Tool, Chisel Steel, 2350 | 1 |
| 90***02 | Tool, Moil Point | 1 |
A5-6-2 Hammermaster, 3850 And 3850q, L/H Feed
| 13***6Z | Bolt; Replaces 60***16 | 12 |
| 40***07 | Grease, Cartridge, 400g | 1 |
| 81***92 | Label | 1 |
A5-1-5 Hammermaster, Js330 Croatia
| 13***1Z | Capscrew, M14 | 8 |
| 33***91 | Tool, Moil Point Hard Rock | 1 |
| 40***07 | Grease, Cartridge, 400g | 1 |
A5-9-32 Breaker, Hm1150, Installation, Js130 Auto Tracked
| 13***0Z | Capscrew, M12x40 | 8 |
| 21***01 | Clamp, Flange 1" | 4 |
| 33***66 | Tool, Hard Rock Moil Point, Hm 1150 | 1 |
A5-1-10 Breaker, Hammermaster 1050q
| 81***74 | Decal, Hm1050q | 2 |
| 90***49 | Washer, Locking | 8 |
| 90***51 | Bolt | 4 |
A5-1-4 Hammermaster, Js240 Croatia
| 13***1Z | Capscrew, M14 | 8 |
| 33***90 | Tool, Moil Point Hard Rock | 1 |
| 40***07 | Grease, Cartridge, 400g | 1 |
A5-8-6 Tools, Hammermaster 3950, 3950q
| 33***52 | Tool, Hm3950 Chisel | 1 |
| 33***53 | Tool, Hm3950 Moil Point | 1 |
| 33***54 | Hm3950 Blunt Tool | 1 |
A5-5-10 Breaker, Hammermaster 2950
| 90***49 | Washer, Locking | 8 |
| 90***51 | Bolt | 4 |
| 90***55 | Plug | 4 |
A5-9-33 Breaker, Hm1150, Installation, Js130 Auto Tracked
| 13***0Z | Capscrew, M12x40 | 8 |
| 21***01 | Clamp, Flange 1" | 4 |
| 33***66 | Tool, Hard Rock Moil Point, Hm 1150 | 1 |
A5-9-17 Breaker, Hammermaster 1150q, Righthand Feed Js160w
| 13***0Z | Capscrew, M12x40 | 8 |
| 14***26 | Washer, Seal | 2 |
| 21***01 | Clamp, Flange 1" | 4 |
A5-3-1 Breaker, Hammermaster 2350
| 13***10 | Capscrew | 2 |
| 40***07 | Grease, Cartridge, 400g | 1 |
| 81***92 | Label | 1 |
A5-1-9 Hammermaster, Js450 Croatia
| 13***1Z | Capscrew, M14 | 8 |
| 33***64 | Bracket, Hanger, 3850 Breaker | 1 |
| 33***40 | Breaker, Js 450 Croatia | 1 |
A5-8-2 Breaker, Hammermaster 3950
| 13***1Z | Capscrew, M14 | 8 |
| 33***64 | Bracket, Hanger, 3850 Breaker | 1 |
| 33***59 | Tool, Hm 3950 Moil, Hard Rock | 1 |
A5-8-3 Breaker, Hammermaster 3950, Details
| 33***48 | Kit, Housing | 1 |
| 33***49 | Pad | 2 |
| 33***50 | Buffer | 1 |
A5-5-18 Breaker, Hammermaster 2950, Js330
| 13***1Z | Capscrew, M14 | 8 |
| 33***47 | Breaker | 1 |
| 33***94 | Tool, Chisel, Hard Rock, Hm2950 | 1 |
A5-9-16 Breaker, Hammermaster 1150, Righthand Feed Js160w
| 14***26 | Washer, Seal | 4 |
| 33***66 | Tool, Hard Rock Moil Point, Hm 1150 | 1 |
| 40***07 | Grease, Cartridge, 400g | 1 |
A5-6-10 Breaker, Hammermaster 3850q
| 81***03 | Decal, Hm3850q Breaker | 2 |
| 90***49 | Washer, Locking | 8 |
| 90***51 | Bolt | 4 |
A5-5-30 Breaker, Hm2950, Installation, Js330 Tracked
| 14***29 | Seal, Dowty | 2 |
| 16***09 | Adapter | 2 |
| 33***62 | Bracket, Hm2950 Hanger, Js330 | 1 |
A5-1-41 Breaker, Hm1050, Installation, Js150 Wheeled
| 14***26 | Washer, Seal | 2 |
| 16***08 | Adapter | 2 |
| 45***00 | Coupling, 1" Bsp Male | 2 |
A5-3-30 Breaker, Hm2350, Installation, Js300 Tracked
| 14***29 | Seal, Dowty | 2 |
| 16***09 | Adapter | 1 |
| 16***15 | Adapter | 1 |
A5-1-8 Hammermaster, Js450 Croatia
| 13***1Z | Capscrew, M14 | 8 |
| 33***64 | Bracket, Hanger, 3850 Breaker | 1 |
| 33***47 | Breaker | 1 |
A5-5-19 Breaker, Hammermaster 2950
| 13***1Z | Capscrew, M14 | 8 |
| 33***47 | Breaker | 1 |
| 33***62 | Bracket, Hm2950 Hanger, Js330 | 1 |
A5-2-1 Breaker, Hammermaster 1350
| 40***07 | Grease, Cartridge, 400g | 1 |
| 81***92 | Label | 1 |
| 81***27 | Decal, Warning | 1 |
A5-4-30 Breaker, Hm1750, Installation, Js240 Tracked
| 14***29 | Seal, Dowty | 2 |
| 16***09 | Adapter | 1 |
| 16***15 | Adapter | 1 |
A5-4-36 Breaker, Hammermaster 1750q, Js200/200w
| 13***1Z | Capscrew, M14 | 8 |
| 40***07 | Grease, Cartridge, 400g | 1 |
| 61***98 | Return Hose, Ultra High Pressure | 1 |
A5-5-40 Breaker, Hammermaster 2950, Js450/460
| 13***1Z | Capscrew, M14 | 8 |
| 33***64 | Bracket, Hanger, 3850 Breaker | 1 |
| 33***47 | Breaker | 1 |
A5-3-11 Breaker, Hammermaster 2350q
| 81***77 | Decal, Hm2350q | 2 |
| 90***49 | Washer, Locking | 8 |
| 90***51 | Bolt | 4 |
A5-8-5 Breaker, Hammermaster 3950, Details Internal
| 33***98 | Valve, Pressure Control | 1 |
| 33***07 | Valve, Check | 1 |
| 33***08 | Valve, Body | 1 |
A5-10-20 Tools, Hammermaster 1450, 1450q
| 33***67 | Tool, Chisel Point | 1 |
| 33***68 | Tool, Moil Point 1450 | 1 |
| 33***69 | Tool, Blunt Steel 1450o | 1 |
A5-5-15 Breaker, Hammermaster 2950
| 13***1Z | Capscrew, M14 | 8 |
| 33***47 | Breaker | 1 |
| 33***93 | Tool, Moil Point Hard Rock | 1 |
A5-5-1 Breaker, Hammermaster 2950
| 13***10 | Capscrew | 2 |
| 40***07 | Grease, Cartridge, 400g | 1 |
| 81***92 | Label | 1 |
A5-2-20 Tools, Hammermaster 1350, 1350q
| 33***88 | Tool, Moil Point Hard Rock | 1 |
| 90***40 | Tool, Hard Rock Chissel | 1 |
| 90***41 | Tool, Hardrock Chisel, Short | 1 |
A5-2-30 Breaker, Hm1350, Installation, Js200 Tracked
| 14***29 | Seal, Dowty | 2 |
| 16***09 | Adapter | 1 |
| 16***15 | Adapter | 1 |
A5-1-31 Breaker, Hm1050, Installation, Js130 Wheeled
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***26 | Washer, Seal | 1 |
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
A5-9-1 Breaker, Hammermaster 1150
| 33***60 | Tool, Hm 1150 Chisel | 1 |
| 33***61 | Tool, Hm 1150 Moil Point | 1 |
| 33***12 | Cylinder | 1 |
A5-9-31 Breaker, Hm1150, Installation, Js130 Wheeled
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***26 | Washer, Seal | 1 |
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
A5-9-34 Breaker, Hm1150, Installation, Non Jcb
| 13***0Z | Capscrew, M12x40 | 8 |
| 21***01 | Clamp, Flange 1" | 4 |
| 33***66 | Tool, Hard Rock Moil Point, Hm 1150 | 1 |
A5-4-20 Tools, Hammermaster 1750, 1750q
| 33***90 | Tool, Moil Point Hard Rock | 1 |
| 90***01 | Tool, Chisel, 1100mm Long | 1 |
| 90***02 | Tool, Moil, 1100mm Long | 1 |
A5-3-31 Breaker, Hm2350, Installation, Js300 Js330
| 13***1Z | Capscrew, M14 | 8 |
| 61***99 | Hose | 2 |
| 98***22 | Bracket, Hanger 860, 3000lc | 1 |
A5-7-1 Autolube, Kit
A5-2-10 Breaker, Hammermaster 1350q
| 81***75 | Decal, Hm1350q | 2 |
| 90***49 | Washer, Locking | 8 |
| 90***51 | Bolt | 4 |
A5-10-10 Breaker, Hammermaster 1450q
| 13***1Z | Capscrew, M14 | 8 |
| 81***44 | Label, S/Tilt/S/Tilt, 550-140 | 2 |
| 90***49 | Washer, Locking | 8 |
A5-6-20 Tools, Hammermaster 3850, 3850q
| 33***44 | Tool, Moil Point, Hm3850, Hm3850q | 1 |
| 33***45 | Tool, Chisel, Hm3850, Hm3850q | 1 |
| 33***46 | Tool, Chisel Steel, Softrock Hm3850, Q | 1 |
A5-6-35 Breaker, Hm1750, Installation, Non Jcb
| 13***0Z | Capscrew, M12x40 | 8 |
| 33***90 | Tool, Moil Point Hard Rock | 1 |
| 40***07 | Grease, Cartridge, 400g | 1 |
A5-9-20 Tools, Hammermaster 1150, 1150q
| 33***60 | Tool, Hm 1150 Chisel | 1 |
| 33***61 | Tool, Hm 1150 Moil Point | 1 |
| 33***62 | Hm 1150 Blunt Tool | 1 |
A5-5-20 Tools, Hammermaster 2950, 2950q
| 33***85 | Tool, Moil Point, Hm2950 | 1 |
| 33***86 | Tool, Chisel Point, Hm2950 | 1 |
| 33***93 | Tool, Chisel, Soft Rock, Hm2950 | 1 |
A5-5-31 Breaker, Hm2950, Installation, Js450 Tracked
| 14***29 | Seal, Dowty | 2 |
| 16***09 | Adapter | 2 |
| 33***64 | Bracket, Hanger, 3850 Breaker | 1 |
A5-1-20 Tools, Hammermaster 1050, 1050q
| 33***87 | Tool, Hard Rock Moil | 1 |
| 90***01 | Tool, Chisel Point | 1 |
| 90***02 | Tool, Moil Point | 1 |
A5-5-45 Breaker, Hammermaster 2950, Non Jcb
| 13***1Z | Capscrew, M14 | 8 |
| 33***47 | Breaker | 1 |
| 33***94 | Tool, Chisel, Hard Rock, Hm2950 | 1 |
A5-1-2 Hammermaster, Js160 Croatia, Hm 1050
| 13***0Z | Capscrew, M12x40 | 8 |
| 21***01 | Clamp, Flange 1" | 4 |
| 33***87 | Tool, Hard Rock Moil | 1 |
A5-3-10 Breaker, Hammermaster 2350q
| 81***77 | Decal, Hm2350q | 2 |
| 90***49 | Washer, Locking | 8 |
| 90***51 | Bolt | 4 |
A5-9-15 Breaker, Hammermaster 1150, Js160t, Js175w
| 33***66 | Tool, Hard Rock Moil Point, Hm 1150 | 1 |
| 40***07 | Grease, Cartridge, 400g | 1 |
| 61***96 | Hose | 1 |
A5-10-1 Breaker, Hammermaster 1450
| 33***67 | Tool, Chisel Point | 1 |
| 33***76 | Tool, Hard Rock Moil Point | 1 |
| 33***24 | Plug | 1 |
A5-7-2 Autolube, Kit
| 98***04 | Kit, Auto Lube, Hm 3950 | 1 |
A5-4-31 Breaker, Hm1750, Installation, Js200 Tracked M704002 On
| 14***29 | Seal, Dowty | 2 |
| 16***09 | Adapter | 1 |
| 16***15 | Adapter | 1 |
A5-1-30 Breaker, Hm1050, Installation, Js130 Tracked
| 14***26 | Washer, Seal | 2 |
| 16***08 | Adapter | 0 |
| 16***12 | Adapter | 1 |
A5-1-3 Hammermaster, Js200 Croatia
| 13***1Z | Capscrew, M14 | 8 |
| 33***88 | Tool, Moil Point Hard Rock | 1 |
| 40***07 | Grease, Cartridge, 400g | 1 |
A6-4-10 Rockbreaker Hm1760q, Js200, Js220, 980/90219, 980/90294
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***2Z | Capscrew | 8 |
A6-3-1 Rockbreaker Hm1560q
| 33***27 | Washer | 4 |
| 33***04 | Plug | 2 |
| 33***21 | Kit-Damper, Parts | 1 |
A6-1-10 Rockbreaker Hm 860q, Js130, Jz140, Js135w, Js145w 980/90213, 980/90289
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***12 | Bolt | 12 |
A6-6-1 Rockbreaker Hm3060q
| 33***63 | Locking Rings | 1 |
| 33***85 | Kit, Lubrication | 1 |
| 33***84 | Cover | 2 |
A6-2-50 Rockbreaker Hm1260q, Universal, 980/90325, 980/90326
| 33***95 | Tool, Moil, Hm1260q | 1 |
| 33***96 | Tool, Chisel, Hm1260q | 1 |
| 33***60 | Label Ansi-15c | 1 |
A6-6-50 Rockbreaker Hm3060q, Universal, 980/90349, 980/90350
| 33***50 | Tool, Moil, Hm306q | 1 |
| 33***51 | Tool, Chisel, Hm3060q | 1 |
| 33***60 | Label Ansi-15c | 1 |
A6-5-20 Rockbreaker Hm2460q, Js330, 980/90222, 980/90297
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***2Z | Capscrew | 8 |
A6-4-40 Rockbreaker Hm1760q, Js240, Js260, 980/90335, 980/90336
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***2Z | Capscrew | 8 |
A6-2-1 Rockbreaker, Hm1260 980/90199,980/90266/67,980/90290/91
| 33***60 | Plug | 8 |
| 33***93 | Box, Hammer | 1 |
| 33***95 | Elastic Pad | 1 |
A6-2-40 Rockbreaker Hm1260q, Js160, Js180 Usa, 980/90323, 980/90324
| 13***4Z | Bolt, M16 X 140 | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***18 | Capscrew | 12 |
A6-3-4 Rockbreaker Hm1560q, Tools
| 33***39 | Tool, Moil, Hm1560q | 1 |
| 33***40 | Tool, Flat Chisel, Hm1560q | 1 |
| 33***70 | Tool, Blunt, Hm1560q | 1 |
A6-4-30 Rockbreaker Hm1760q, Js200, Js220 Usa, 980/90333, 980/90334
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***2Z | Capscrew | 8 |
A6-5-40 Rockbreaker Hm2460q, Js330 Usa, 980/90341, 980/90342
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***2Z | Capscrew | 8 |
A6-5-1 Rockbreaker Hm2460q
| 33***57 | Plug | 1 |
| 33***85 | Kit, Lubrication | 1 |
| 33***04 | Plug | 2 |
A6-4-1 Rockbreaker Hm1760q
| 33***85 | Kit, Lubrication | 1 |
| 33***04 | Plug | 2 |
| 33***32 | Plug | 1 |
A6-5-3 Rockbreaker Hm2460q, Lubrication
| 33***62 | Bolt, Cylindrical | 7 |
| 33***63 | Locking Rings | 7 |
| 33***09 | Adapter | 1 |
A6-1-5 Rockbreaker Hm860q, Js165w/175w, Usa
| 13***4Z | Bolt, M16 X 140 | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***12 | Bolt | 12 |
A6-4-50 Rockbreaker Hm1760q, Universal, 980/90337, 980/90338
| 33***43 | Tool, Moil, Hm1760q | 1 |
| 33***44 | Tool, Flat Chisel, Hm1760q | 1 |
| 33***60 | Label Ansi-15c | 1 |
A6-4-3 Rockbreaker Hm1760q, Lubrication
| 33***62 | Bolt, Cylindrical | 7 |
| 33***63 | Locking Rings | 7 |
| 33***09 | Adapter | 1 |
A6-20-4 Power Head, Hm380 From S/N 1452103
| 33***63 | O Ring | 1 |
| 33***64 | Plug | 6 |
| 33***65 | Plug | 6 |
A6-8-0 Breaker, Hm2180
| 98***70 | Breaker, Hm2180 | 1 |
| 98***71 | Rockbreaker, Assembly Hm2180, Js200 | 1 |
| 98***11 | Kit, Rockbreaker Fitting, Hm2180 | 1 |
A6-6-3 Rockbreaker Hm3060q, Lubrication
| 33***62 | Bolt, Cylindrical | 4 |
| 33***63 | Locking Rings | 7 |
| 33***09 | Adapter | 1 |
A6-3-40 Rockbreaker Hm1560q, Js200, Js220, 980/90329, 980/90330
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***18 | Capscrew | 10 |
A6-6-30 Rockbreaker Hm3060q, Js330 Usa, 980/90245, 980/90246
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***19 | Capscrew | 12 |
A6-6-20 Rockbreaker Hm3060q, Js460, 980/90224, 980/90299
| 13***0Z | Bolt, M24 X 200mm Long | 2 |
| 13***3Z | Nut | 2 |
| 13***19 | Capscrew | 12 |
A6-8-3 Breaker, Housing, Hm2180
| 33***47 | Casing, Main | 1 |
| 33***48 | Damper, Lower | 1 |
| 33***49 | Damper, Upper | 1 |
A6-5-4 Rockbreaker Hm2460q, Tools
| 33***47 | Tool, Moil 500mm Long, Hm2460q | 1 |
| 33***48 | Tool, Chisel 500mm Long, Hm2460q | 1 |
| 33***49 | Tool, Blunt, Hm2460q | 1 |
A6-2-20 Rockbreaker Hm1260q, Js160, Js180, 980/90216, 980/90291
| 13***4Z | Bolt, M16 X 140 | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***18 | Capscrew | 12 |
A6-7-4 Rockbreaker Hm4160q, Tools
| 33***54 | Tool, Moil, Hm4160q | 1 |
| 33***55 | Tool, Chisel, Hm4160q | 1 |
| 33***56 | Tool, Blunt, Hm4160q | 1 |
A6-2-5 Rockbreaker, Hm 2180, Js200w
| 13***4Z | Bolt, M16 X 140 | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***18 | Capscrew | 12 |
A6-7-1 Rockbreaker Hm4160q
| 33***63 | Locking Rings | 10 |
| 33***84 | Cover | 2 |
| 33***39 | Kit-Damper, Parts | 1 |
A6-2-30 Rockbreaker Hm1260q, Js130, Jz140 Usa, 980/90321, 980/90322
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***18 | Capscrew | 12 |
A6-6-10 Rockbreaker Hm3060q, Js330, 980/90223, 980/90298
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***19 | Capscrew | 12 |
A6-1-11 Rockbreaker Hm 860q, Js130, Jz140, Js135w, Js145w 980/90317, 980/90318
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***12 | Bolt | 12 |
A6-7-3 Rockbreaker Hm4160q, Lubrication
| 33***62 | Bolt, Cylindrical | 4 |
| 33***63 | Locking Rings | 7 |
| 33***09 | Adapter | 1 |
A6-3-20 Rockbreaker Hm1560q, Js200, Js220, 980/90218, 980/90293
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***18 | Capscrew | 10 |
A6-7-2 Rockbreaker Hm4160q, Percussion Unit
| 33***48 | Valve, Filling | 1 |
| 33***56 | Valve, Non Return | 1 |
| 33***61 | Screw Plug | 1 |
A6-4-4 Rockbreaker Hm1760q, Tools
| 33***43 | Tool, Moil, Hm1760q | 1 |
| 33***44 | Tool, Flat Chisel, Hm1760q | 1 |
| 33***45 | Tool, Blunt, Hm1760q | 1 |
A6-8-2 Rockbreaker, Hm2180
| 33***55 | Cylinder, Hm2180 Spare Cylinde | 1 |
| 33***61 | Plug | 1 |
| 33***62 | Plug | 2 |
A6-2-4 Rockbreaker, Tools, Hm1260
| 33***95 | Tool, Moil, Hm1260q | 1 |
| 33***96 | Tool, Chisel, Hm1260q | 1 |
| 33***97 | Tool, Blunt, Hm1260q | 1 |
A6-7-30 Rockbreaker Hm4160q, Universal, 980/90353, 980/90354
| 33***54 | Tool, Moil, Hm4160q | 1 |
| 33***55 | Tool, Chisel, Hm4160q | 1 |
| 33***60 | Label Ansi-15c | 1 |
A6-20-2 Power Head, Hm380
| 33***63 | O Ring | 1 |
| 33***64 | Plug | 6 |
| 33***65 | Plug | 6 |
A6-5-10 Rockbreaker Hm2460q, Js240, Js260, 980/90221, 980/90296
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***2Z | Capscrew | 8 |
A6-5-30 Rockbreaker Hm2460q, Js240, Js260 Usa, 980/90339, 980/90340
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***2Z | Capscrew | 8 |
A6-20-1 Breaker, Hm380
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***26 | Washer, Seal | 1 |
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
A6-7-10 Rockbreaker Hm4160q, Js460, 980/90300, 980/90225
| 13***0Z | Bolt, M24 X 200mm Long | 2 |
| 13***3Z | Nut | 2 |
| 13***19 | Capscrew | 12 |
A6-20-3 Charging Tool, Kit, Hm380
| 33***77 | Adaptor, Gas Charging | 1 |
| 33***78 | Hose, Gas | 1 |
| 33***32 | Meter, Pressure, 250 Bar | 1 |
A6-1-1 Rockbreaker Hm 860q-, 4160, 980/90264,980/90265,980/90198
| 33***45 | Hammer Box | 1 |
| 33***46 | Elastic Pad | 1 |
| 33***47 | Shck Absorber | 1 |
A6-1-2 Rockbreaker Hm 860q, Percusion Unit, 980/90264,980/90265,980/90198
| 33***35 | Tensioning Bolt | 4 |
| 33***36 | Washer | 4 |
| 33***38 | Nut | 4 |
A6-6-40 Rockbreaker Hm3060q, Js460 Usa, 980/90347, 980/90348
| 13***0Z | Bolt, M24 X 200mm Long | 2 |
| 13***3Z | Nut | 2 |
| 13***19 | Capscrew | 12 |
A6-2-6 Rockbreaker, Hm2180 Js200w, Usa
| 13***4Z | Bolt, M16 X 140 | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***18 | Capscrew | 12 |
A6-6-4 Rockbreaker Hm3060q, Tools
| 33***50 | Tool, Moil, Hm306q | 1 |
| 33***51 | Tool, Chisel, Hm3060q | 1 |
| 33***52 | Tool, Blunt, Hm3060q | 1 |
A6-6-2 Rockbreaker Hm3060q, Percussion Unit
| 33***48 | Valve, Filling | 1 |
| 33***56 | Valve, Non Return | 1 |
| 33***61 | Screw Plug | 1 |
A6-5-50 Rockbreaker Hm2460q, Universal, 980/90343, 980/90344
| 33***47 | Tool, Moil 500mm Long, Hm2460q | 1 |
| 33***48 | Tool, Chisel 500mm Long, Hm2460q | 1 |
| 33***60 | Label Ansi-15c | 1 |
A6-5-2 Rockbreaker Hm2460q, Percussion Unit
| 33***48 | Valve, Filling | 1 |
| 33***56 | Valve, Non Return | 1 |
| 33***94 | Connecting Screw | 1 |
A6-1-20 Rockbreaker Hm 860q, Js165w, Js175w, 980/90214, 980/90474
| 13***4Z | Bolt, M16 X 140 | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***12 | Bolt | 12 |
A6-4-2 Rockbreaker Hm1760q, Percussion Unit
| 33***48 | Valve, Filling | 1 |
| 33***56 | Valve, Non Return | 1 |
| 33***94 | Connecting Screw | 1 |
A6-1-4 Rockbreaker Hm 860q, Tools
| 33***13 | Tool, Moil, Hm 860q | 1 |
| 33***14 | Tool, Flat Chisel, Hm 860q | 1 |
| 33***18 | Tool, 200mm Wide Chisel, Hm 860q | 1 |
A6-4-20 Rockbreaker Hm1760q, Js240, Js260, 980/90220, 980/90295
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***2Z | Capscrew | 8 |
A6-3-10 Rockbreaker Hm1560q, Js160, Js180, 980/90247, 980/90292
| 13***4Z | Bolt, M16 X 140 | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***18 | Capscrew | 10 |
A6-3-30 Rockbreaker Hm1560q, Js160, Js180 Usa, 980/90327, 980/90328
| 13***4Z | Bolt, M16 X 140 | 2 |
| 13***3Z | Nut, M16 | 2 |
| 13***18 | Capscrew | 10 |
A6-2-3 Rockbreaker, Lubrication, Hm1260
| 33***62 | Bolt, Cylindrical | 7 |
| 33***63 | Locking Rings | 7 |
| 33***09 | Adapter | 1 |
A6-8-1 Rockbreaker, Hm2180
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
| 13***3D | Nut, Lock M24 | 18 |
A6-3-3 Rockbreaker Hm1560q, Lubrication
| 33***62 | Bolt, Cylindrical | 7 |
| 33***63 | Locking Rings | 7 |
| 33***09 | Adapter | 1 |
A6-3-50 Rockbreaker Hm1560q, Universal, 980/90331, 980/90332
| 13***18 | Capscrew | 10 |
| 33***39 | Tool, Moil, Hm1560q | 1 |
| 33***40 | Tool, Flat Chisel, Hm1560q | 1 |
A6-1-30 Rockbreaker Hm 860q, Universal, 980/90319, 980/90320
| 33***13 | Tool, Moil, Hm 860q | 1 |
| 33***14 | Tool, Flat Chisel, Hm 860q | 1 |
| 33***60 | Label Ansi-15c | 1 |
A6-3-2 Rockbreaker Hm1560q, Percussion Unit
| 33***47 | Nipple, Grease | 1 |
| 33***48 | Valve, Filling | 1 |
| 33***56 | Valve, Non Return | 1 |
A6-2-10 Rockbreaker Hm1260q, Js130, Jz140, 980/90215, 980/90290
| 13***5Z | Bolt | 12 |
| 13***3Z | Nut, M16 | 2 |
| 13***18 | Capscrew | 12 |
A6-2-2 Rockbreaker, Percussion Unit, Hm1260 980/90215/16,980/90290/91
| 33***47 | Nipple, Grease | 1 |
| 33***48 | Valve, Filling | 1 |
| 33***22 | Seal, O Ring | 1 |
A6-7-20 Rockbreaker Hm4160q, Js460, 980/90351, 980/90352
| 13***0Z | Bolt, M24 X 200mm Long | 2 |
| 13***3Z | Nut | 2 |
| 13***19 | Capscrew | 12 |
A6-1-3 Rockbreaker Hm 860q, Lubrication, 980/90264,980/90265,980/90198
| 33***62 | Bolt, Cylindrical | 7 |
| 33***63 | Locking Rings | 7 |
| 33***09 | Adapter | 1 |
A7-3-10 Rockbreaker, Hm265q, Tools
| 33***96 | Tool, Moil, Hm265q | 1 |
| 33***97 | Tool, Narrow Chisel, Hm265q | 1 |
| 33***98 | Tool, Wide Chisel, Hm265q | 1 |
A7-3-50 Rockbreaker, Hm265q, Jcb2cx, 980/90241
| 13***7D | Bolt, M16x75 | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A7-2-1 Rockbreaker, Hm385q, Components
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
| 33***95 | Kit-Repair, Breaker | 1 |
| 33***98 | Housing, Accumulator | 1 |
A7-3-40 Rockbreaker, Hm265q, Jcb8052, 980/90243
| 13***7D | Bolt, M16x75 | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A7-4-50 Rockbreaker, Hm495q, Universal, 980/90316
| 13***1D | Bolt, M16 X 110 | 14 |
| 13***3D | Nut, M16 | 14 |
| 33***66 | Label Ansi-15c | 1 |
A7-2-30 Rockbreaker, Hm385q, Jcb3cx, 4cx, 980/90239
| 13***8D | Bolt | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A7-4-10 Rockbreaker, Hm495q, Tools
| 33***01 | Tool, 840mm Long Moil, Hm495q | 1 |
| 33***02 | Tool, 1200mm Long Moil, Hm495q | 1 |
| 33***03 | Tool, Narrow Chisel, Hm495q | 1 |
A7-1-30 Rockbreaker, Hm165q, Jcb8027, 803, 8032, 804. 980/90237
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A7-2-40 Rockbreaker, Hm385q, Jz70, 980/90240
| 13***8D | Bolt | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A7-4-40 Rockbreaker, Hm495q, Jcb4cx, 980/90245
| 13***1D | Bolt, M16 X 110 | 14 |
| 13***3D | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A7-4-1 Rockbreaker, Hm495q, Components
| 13***8D | Bolt | 14 |
| 13***3D | Nut, M16 | 14 |
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
A7-3-1 Rockbreaker, Hm265q, Components
| 16***04 | Adapter, Male/Male | 2 |
| 33***31 | Plunger | 6 |
| 33***13 | Plug, Hex Socket | 1 |
A7-2-50 Rockbreaker, Hm385q, Robot 190, 1110, 980/90240
| 13***8D | Bolt | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A7-3-61 Rockbreaker, Hm265q, Robot 160, 170, 980/90369
| 13***7D | Bolt, M16x75 | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A7-4-20 Rockbreaker, Hm495q, Jz70, 980/90246
| 13***1D | Bolt, M16 X 110 | 14 |
| 13***3D | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A7-3-55 Hm265, 3cx, Russian Special
| 13***2Z | Bolt, M16 X 50mm | 3 |
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7D | Bolt, M16x75 | 14 |
A7-3-60 Rockbreaker, Hm265q, Robot 160, 170, 980/90366
| 13***7D | Bolt, M16x75 | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A7-2-60 Rockbreaker, Universal, Hm385
| 33***80 | Book, Decal Replacement In, Usa Rockbreakers | 0 |
| 33***66 | Label Ansi-15c | 1 |
| 81***89 | Label, Pressurised System | 1 |
A7-1-40 Rockbreaker, Hm165q, Jcb1cx, 980/90453
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A7-3-20 Rockbreaker, Hm265q, Jcb803, 8032, 804, 980/90242
| 13***7D | Bolt, M16x75 | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A7-2-10 Rockbreaker, Hm385q, Tools
| 33***61 | Tool, Moil, 800mm Long, Hm385q | 1 |
| 33***62 | Tool, Moil, 1000mm Long, Hm385q; Replaced By 33***61, See San 22339 | 1 |
| 33***64 | Tool, Narrow Chisel, Hm383q | 1 |
A7-1-51 Rockbreaker, Hm165q, Robot 160, 190, 980/90368 Usa
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A7-3-30 Rockbreaker, Hm265q, Jcb8045, 980/90286
| 13***7D | Bolt, M16x75 | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A7-1-10 Rockbreaker, Hm165q, Tools
| 33***94 | Tool, Moil 50mm Dia X 510l, Hm165q | 1 |
| 33***95 | Tool, 50mm Narrow Chisel, Hm165q | 1 |
| 33***96 | Tool, 125mm Wide Chisel, Hm165q | 1 |
A7-4-30 Rockbreaker, Hm495q, Jcb8080, 980/90244
| 13***1D | Bolt, M16 X 110 | 14 |
| 13***3D | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A7-1-65 Rockbreaker, Hm165q, Jcb Midi Cx (Usa), 980/90868
| 13***7D | Bolt, M16x75 | 8 |
| 13***3Z | Nut, M16 | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A7-1-50 Rockbreaker, Hm165q, Robot 160, 190, 980/90355
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A7-1-60 Rockbreaker, Hm165q, Jcb Midi Cx, 980/90867
| 13***7D | Bolt, M16x75 | 8 |
| 13***3Z | Nut, M16 | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A7-1-20 Rockbreaker, Hm165q, Jcb802, 980/90253
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A7-2-20 Rockbreaker, Hm385q, Jcb8052, Jcb8060, Jcb8080. 980/90238
| 13***8D | Bolt | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A7-1-41 Rockbreaker, Hm165q, Jcb208, 980/90456
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A7-1-1 Rockbreaker, Hm165q, Components
| 16***04 | Adapter, Male/Male | 2 |
| 33***31 | Plunger | 6 |
| 33***45 | Buffer, Lock | 1 |
A8-2-4 Cutter Crusher, Mp2/3/400, Transmission
| 33***39 | Assembly, Rotary Valve | 1 |
| 33***45 | Kit, Seal | 1 |
| 33***05 | Bearing, . | 1 |
A8-4-2 Cutter Crusher, Mainframe, Mp400
| 33***63 | Locking Rings | 19 |
| 33***27 | Washer | 6 |
| 33***57 | Washer, Lock | 28 |
A8-2-1 Cutter Crusher, Mp200
| 33***63 | Locking Rings | 8 |
| 33***99 | Bolt | 8 |
| 33***59 | Kit-Seal | 2 |
A8-5-1 Fitting Kit, Mp200, Js160-260
| 16***55 | Adaptor, 1/2" X 3/8" | 2 |
| 33***93 | Hose, 1750mm | 2 |
| 33***94 | Hose, 2000mm | 2 |
A8-3-5 Cutter Crusher, Cutting Jaws, Mp300
| 33***53 | Shim, 1mm Thick | 0 |
| 33***84 | Shim, 1mm Thick | 0 |
| 33***88 | Kit, Tooth X3, Bolts & Nuts | 0 |
A8-5-3 Fitting Kit, Mp400, Js330/460
| 16***55 | Adaptor, 1/2" X 3/8" | 2 |
| 33***96 | Hose, 2800mm | 2 |
| 33***04 | Hose, 2120mm | 2 |
A8-3-4 Rotating, Section
| 33***63 | Locking Rings | 12 |
| 33***27 | Washer | 4 |
| 33***87 | Plug | 4 |
A8-2-3 Cutter Crusher, Mp200 Upto S/N 249, Rotary Drive
| 33***63 | Locking Rings | 4 |
| 33***27 | Washer | 40 |
| 33***87 | Plug | 4 |
A8-2-2 Cutter Crusher, Mp200, Main Frame
| 33***63 | Locking Rings | 6 |
| 33***27 | Washer | 28 |
| 33***99 | Bolt | 3 |
A8-6-1 Cutter Crusher
A8-3-2 Cutter Crusher, Mp300, Mainframe
| 33***63 | Locking Rings | 6 |
| 33***57 | Washer, Lock | 28 |
| 33***83 | O Ring | 8 |
A8-5-2 Fitting Kit, Mp300, Js240-260 Js330
| 16***55 | Adaptor, 1/2" X 3/8" | 2 |
| 33***91 | Hose, 1600mm | 2 |
| 33***93 | Hose, 1750mm | 2 |
A8-4-5 Jaw Assembly, Mp400
| 33***27 | Washer | 3 |
| 33***53 | Shim, 1mm Thick | 0 |
| 33***60 | Spacer, Ring | 2 |
A8-4-1 Cutter Crusher, Mp400
| 33***63 | Locking Rings | 32 |
| 33***99 | Bolt | 32 |
| 33***62 | Cutter, Crusher Mp400 | 1 |
A8-2-5 Cutter Crusher, Mp200, Cutter Jaws
| 33***27 | Washer | 8 |
| 33***54 | Blade, Cuttter | 4 |
| 33***56 | Screw, Socket Head | 8 |
A8-1-1 Cutter Crusher, Cc1900
| 13***18 | Capscrew | 12 |
| 16***04 | Adapter, Male/Male | 2 |
| 33***80 | Screw, Socket Head | 3 |
A8-4-3 Mp400, Rotation
| 33***63 | Locking Rings | 34 |
| 33***27 | Washer | 4 |
| 33***87 | Plug | 4 |
A8-3-3 Cutter Crusher, Rotation, Mp300
| 33***63 | Locking Rings | 14 |
| 33***27 | Washer | 4 |
| 33***87 | Plug | 4 |
A8-3-1 Cutter Crusher, Mp300
| 33***63 | Locking Rings | 8 |
| 33***99 | Bolt | 8 |
| 33***61 | Cutter, Crusher, Mp300 Abi | 1 |
A8-2-6 Rotary Section Mp200, From S/N 250
| 33***63 | Locking Rings | 12 |
| 33***27 | Washer | 40 |
| 33***87 | Plug | 4 |
B Jcb Demonstration Units
B1-1-1 Ram Assy 551/60182, Jcb Demo Trailer, Torton Bodies Ref. Sp6893/94
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 24***27 | Seal | 1 |
| 24***15 | Ring, Wear | 2 |
C Trash Pump, Submersible
C1-1-1 Trash Pump, Submersible, 4"
| 13***7Z | Capscrew, M8x25mm | 2 |
| 13***23 | Socket Cap Bolt 130 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
D Compactor, 801 Excavator
D1-1-1 Compactor, 801/2/3/4, Excavator
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***3Z | Nut, Lock, M10 | 8 |
| 13***8Z | Capscrew | 4 |
E Earth Drills & Augers
E1-9-3 Gearbox, Earth Drill
| 98***09 | O Ring | 1 |
| 98***11 | O Ring | 2 |
| 98***28 | Seal, Oil | 1 |
E1-4-2 Power Head, 980/89557
| 13***2Z | Bolt, M12 X 50mm | 10 |
| 13***10 | Bolt | 8 |
| 13***3D | Nut, M12 | 10 |
E1-9-1 Earth Drill, 980/89657, 1cx
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***04 | Adapter, Male/Male | 1 |
E1-5-2 Gearbox, Earth Drill
| 98***86 | Kit, Seal | 1 |
| 98***93 | Gearbox, Earth Drill, 161 | 1 |
| 98***15 | Ring, Oil | 2 |
E1-8-2 Power Head, 980/89556
| 13***2Z | Bolt, M12 X 50mm | 10 |
| 13***10 | Bolt | 8 |
| 13***3D | Nut, M12 | 10 |
E1-1-3 Gearbox, Earth Drill, 980/89687
| 98***09 | O Ring | 1 |
| 98***11 | O Ring | 2 |
| 98***28 | Seal, Oil | 1 |
E1-9-2 Earth Drill, 980/89556
| 13***2Z | Bolt, M12 X 50mm | 10 |
| 13***10 | Bolt | 8 |
| 13***3D | Nut, M12 | 10 |
E1-8-5 Earth Drill, 980/90227, 8040 8045zts
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 33***01 | Bracket, Swivel | 1 |
E1-6-2 Power Head, 980/89554
| 13***10 | Bolt, M10 X 40 | 6 |
| 13***3D | Nut, Self Lock M10 | 6 |
| 13***3D | Nut, M12 | 4 |
E1-6-1 Earth Drill, 980/89653, Micro & Micro+ Excavator
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***04 | Adapter, Male/Male | 1 |
E1-3-2 Power Head, 980/89554
| 13***10 | Bolt, M10 X 40 | 6 |
| 13***3D | Nut, Self Lock M10 | 6 |
| 13***3D | Nut, M12 | 4 |
E1-2-1 Earth Drill, 980/89587, 3cx, 806, 8080
| 16***04 | Adapter, Male/Male | 4 |
| 61***00 | Hose | 2 |
| 81***90 | Cap, Blanking 1/2" Bsp, Female | 2 |
E1-4-3 Gearbox, Earth Drill, 980/89687
| 98***09 | O Ring | 1 |
| 98***11 | O Ring | 2 |
| 98***28 | Seal, Oil | 1 |
E1-3-1 Earth Drill, 980/89584, Micro To 801.8
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
E1-2-2 Power Head, 980/89557
| 13***2Z | Bolt, M12 X 50mm | 10 |
| 13***10 | Bolt | 8 |
| 13***3D | Nut, M12 | 10 |
E1-1-1 Earth Drill, 980/89588, Robot 160, 170
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 23***00 | Pin, Pivot | 2 |
E1-7-1 Earth Drill, 980/89589, Robot 190, 1110
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 23***00 | Pin, Pivot | 2 |
E1-2-3 Gearbox, Earth Drill, 980/89687
| 98***09 | O Ring | 1 |
| 98***11 | O Ring | 2 |
| 98***28 | Seal, Oil | 1 |
E1-10-1 Drillmaster, 750
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***03 | Adapter | 2 |
E1-5-1 Earth Drill, 980/89555
| 13***10 | Bolt, M10 X 40 | 8 |
| 13***10 | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 8 |
E1-7-2 Power Head, 980/89557
| 13***2Z | Bolt, M12 X 50mm | 10 |
| 13***10 | Bolt | 8 |
| 13***3D | Nut, M12 | 10 |
E1-4-1 Earth Drill, 980/89586, 2cx.
| 14***15 | Washer, Seal; Replaces Khj0891 | 6 |
| 16***03 | Adapter, Male/Male | 4 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 4 |
E1-1-2 Earth Drill, 980/89556
| 13***2Z | Bolt, M12 X 50mm | 10 |
| 13***10 | Bolt | 8 |
| 13***3D | Nut, M12 | 10 |
E1-8-1 Earth Drill, 980/89585, 802, 803, 804
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***04 | Adapter, Male/Male | 1 |
E1-7-3 Gearbox, Earth Drill
| 13***2Z | Bolt, M12 X 50mm | 10 |
| 13***10 | Bolt | 8 |
| 13***3D | Nut, M12 | 10 |
E2-1-2 Auger, Aggressor Range
| 33***55 | Tooth, Only, Standard Outer | 2 |
| 33***56 | Tooth, Standard, Wisdom, Inner | 0 |
| 33***57 | Tooth, Only, Carbide Outer | 2 |
E2-1-1 Auger, Aggressor Range
| 98***58 | Tool, Auger 6", Aggressor, 1.2m | 1 |
| 98***59 | Tool, Auger 9", Aggressor, 1.2m | 1 |
| 98***60 | Tool, Auger 12", Aggeessor | 1 |
E2-2-1 Auger, Heavy Duty Range
| 98***10 | Tool, Pilot Bit | 1 |
| 98***11 | Tooth, Steel, Standard | 0 |
| 98***13 | Tooth, Carbide Tip | 0 |
E2-3-1 Auger, Rock Ripper
| 98***66 | Tool, Auger 12", Rock Ripper | 1 |
| 98***67 | Tool, Auger 18", Rock Ripper | 1 |
| 98***68 | Bar, Extension, 1m X 2" | 1 |
G Manure Fork & Power Grab
G1-8-1 Manure Fork, 7'6" + 9 Tines, 980/90075. Loadall Pin And Cone (Hardox)
| 33***74 | Fork, Tine (Hardox) | 9 |
| 33***47 | Connector, Tee, Welded Assembly | 1 |
| 98***75 | Frame, & Fork Assembly, Hardox, Loadall Pin And Cone | 1 |
G1-5-1 Manure Fork, 7'6" + 10 Tines, 980/90072. Loadall Pin And Cone
| 33***16 | Fork, Tine & Nut Assembly | 10 |
| 33***24 | Fork, Tine | 10 |
| 98***72 | Frame, & Fork Assembly,Loadall, Pin And Cone | 1 |
G1-7-1 Manure Fork, 7'6" + 9 Tines, 980/90074. Loadall Q-Fit (Hardox)
| 33***74 | Fork, Tine (Hardox) | 9 |
| 33***47 | Connector, Tee, Welded Assembly | 1 |
| 98***74 | Frame, & Fork Assembly, Hardox, Loadall Q-Fit | 1 |
G1-4-1 Manure Fork, 7'6" + 10 Tines, 980/90071. Loadall Toolcarrier
| 33***16 | Fork, Tine & Nut Assembly | 10 |
| 33***24 | Fork, Tine | 10 |
| 98***71 | Frame, & Fork Assembly,Loadall, Tool-Carrier | 1 |
G1-2-1 Manure Fork, 7' + 9 Tines, 980/90069. Loadall Quickhitch
| 33***16 | Fork, Tine & Nut Assembly | 9 |
| 98***69 | Frame, & Fork Assembly,Loadall, Quickhitch | 1 |
G1-3-1 Manure Fork, 7'6" + 10 Tines, 980/90070. Loadall Q-Fit
| 33***16 | Fork, Tine & Nut Assembly | 10 |
| 33***24 | Fork, Tine | 10 |
| 98***70 | Frame, & Fork Assembly,Loadall, Q-Fit | 1 |
G1-6-1 Manure Fork, 7'6" + 10 Tines, 980/90073. Loadall Manitou
| 33***16 | Fork, Tine & Nut Assembly | 10 |
| 33***24 | Fork, Tine | 10 |
| 98***73 | Frame, & Fork Assembly,Loadall, Manitou Fitting | 1 |
G1-9-1 Manure Fork, 7'6" + 9 Tines, 980/90076. Loadall Manitou (Hardox)
| 33***74 | Fork, Tine (Hardox) | 9 |
| 33***47 | Connector, Tee, Welded Assembly | 1 |
| 98***76 | Frame, & Fork Assembly, Hardox, Loadall Manitou | 1 |
G1-1-1 Manure Fork, 6' + 8 Tines, 980/89957. Loadall Quickhitch
| 33***16 | Fork, Tine & Nut Assembly | 8 |
| 98***57 | Frame, & Fork Assembly,Loadall, Quickhitch | 1 |
G2-3-1 Power Grab, 7'6"+ 10 Fork 6 Grab, 980/90085. Loadall Q-Fit
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-19-1 Power Grab, 7'6"+ 10 Fork 4 Grab, 980/90140. Loadall Manitou (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-16-1 Power Grab, 7'6"+ 10 Fork 4 Grab, 980/90137. Loadall Toolcarrier (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-2-1 Power Grab, 7' + 9 Fork 6 Grab, 980/90084. Loadall Quickhitch
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-23-1 Grapple, 980/88994
| 14***11 | Seal, Bonded | 10 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***02 | Adapter, 1/4" Bsp M/M | 10 |
G2-9-1 Power Grab, 7'6"+ 9 Fork 6 Grab, 980/90091. Loadall Manitou (Hardox)
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-18-1 Power Grab, 7'6"+ 10 Fork 4 Grab, 980/90139. Loadall Pin & Cone (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-15-1 Power Grab, 7'6"+ 10 Fork 4 Grab, 980/90136. Loadall Q-Fit (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-6-1 Power Grab, 7'6"+ 10 Fork 6 Grab, 980/90088. Loadall Manitou
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-17-1 Power Grab, 7'6"+ 10 Fork 4 Grab, 980/90138. Loadall Quickhitch (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-12-1 Power Grab, 7'6"+ 10 Fork 5 Grab, 980/90123. Loadall Quickhitch (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-4-1 Power Grab, 7'6"+ 10 Fork 6 Grab, 980/90086. Loadall Toolcarrier
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-14-1 Power Grab, 7'6"+ 10 Fork 5 Grab, 980/90125. Loadall Manitou (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-11-1 Power Grab, 7'6"+ 10 Fork 5 Grab, 980/90122. Loadall Toolcarrier (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-8-1 Power Grab, 7'6"+ 9 Fork 6 Grab, 980/90090. Loadall Pin And Cone (Hardox)
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-7-1 Power Grab, 7'6"+ 9 Fork 6 Grab, 980/90089. Loadall Q-Fit (Hardox)
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-5-1 Power Grab, 7'6"+ 10 Fork 6 Grab, 980/90087. Loadall Pin And Cone
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-13-1 Power Grab, 7'6"+ 10 Fork 5 Grab, 980/90124. Loadall Pin & Cone (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
G2-1-1 Power Grab, 6' + 8 Fork 5 Grab, 980/89869. Loadall Quickhitch
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
G2-20-1 Ram Assembly, Power Grab, 903/21148 Removed From Hold
| 90***78 | Nipple, Grease | 2 |
| 90***48 | Ram, Assembly | 1 |
| 90***74 | Piston, Rod Assembly | 1 |
G2-22-1 Power Grab, Pipework, Loadall (Hardox)
| 13***05 | Bolt | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 13***10 | Capscrew | 1 |
G2-21-1 Ram Assembly, Power Grab, 556/60328
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
| 55***28 | Ram, Assembly | 2 |
| 59***11 | Rod, Piston, 6in1 Shovel; Replaced By 59***62, See San 12877 | 1 |
G2-10-1 Power Grab, 7'6"+ 10 Fork 5 Grab, 980/90121. Loadall Q-Fit (Hardox)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***16 | Bolt | 4 |
H Ground Preperation
H3-30-8 Stumpgrinder, Control Handle, 980/90532
| 72***55 | Harness, Control Handle | 1 |
| 72***56 | Harness, Solenoid Connectors | 1 |
H3-30-2 Stumpgrinder, Cutting Wheel, 980/90532
H3-30-0 Stumpgrinder, Mainframe, 980/90532
H3-30-6 Stumpgrinder, Swing Ram, 980/90532
| 33***27 | Piston | 1 |
| 33***28 | Gland | 1 |
| 33***30 | Bush | 1 |
H3-30-1 Stumpgrinder, Cutting Wheel, 980/90532
| 33***32 | Ram | 1 |
| 33***33 | Ram | 1 |
| 33***16 | Screw | 2 |
H3-30-4 Stumpgrinder, Control Valve, 980/90532
| 25***48 | Valve, Check | 1 |
| 25***49 | Valve, Pressure Compensatio | 1 |
| 25***50 | Valve, Check | 1 |
H3-30-5 Stumpgrinder, Hydraulic Motor, 980/90532
| 20***23 | Motor | 1 |
| 33***21 | Screw | 2 |
| 33***31 | Pin | 1 |
H3-30-3 Stumpgrinder, Hydraulics, 980/90532
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
H3-30-7 Stumpgrinder, Lift Ram, 980/90532
| 33***27 | Piston | 1 |
| 33***28 | Gland | 1 |
| 33***30 | Bush | 1 |
P Blades, Snow/Dozer
P1-1-1 Snow Plough, Dozer Blade, Hydraulic
| 90***06 | Kit, Seal | 1 |
| 98***27 | Blade, Dozer/Snow Plough, Hydraulic | 1 |
| 98***14 | Pin | 5 |
S Sweeper 7',8' And 2.1m, 2.4m
S1-2-2 Sweeper Collector, Brush Core Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 22 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 2 |
S1-3-3 Frame, Q/Hitch 980/89013, 7' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S1-1-50 Snowblade Manual, Loadall Q Fit, 2.29 Wide
| 98***70 | Snow Blade L=2.5m, 2.29m Working Width | 1 |
S1-3-5 Frame, Fork Mounting, 980/88991
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S1-3-4 Frame, Q/Hitch 980/89011, 7' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S1-2-4 Sweeper Collector, Hydraulic Circuit, Gutter Brush Option
| 14***18 | Seal, Bonded, 1/2" Bsp | 12 |
| 16***04 | Adapter, Male/Male | 6 |
| 20***35 | Motor | 1 |
S1-3-2 Frame, Q/Hitch 980/89012, 7' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S1-2-8 Sweeper Collector, Gutter Brush
| 13***9Z | Screw, M10x35mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
S1-2-7 Sweeper Collector, Decal
| 81***42 | Decal, Warning, Before Operating | 4 |
| 81***02 | Plate, Data | 1 |
| 81***90 | Decal, Jcb, Insignia 375 X 300mm | 1 |
S1-2-6 Sweeper Collector, Sprinkler Assembly
| 13***9Z | Bolt, M12x35 Grade 8.8 | 4 |
| 13***2Z | Bolt, M12 X 120 | 2 |
| 13***3Z | Nut, M12 | 14 |
S1-1-20 Sweeper 7', Q Hitch, 520, 526 Tool Carrier M/C'S.
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 33***56 | Sweeper, 7' Water Sprinkler, Q Hitch Frame Mount | 1 |
S1-1-60 Snowblade Hydraulic, 3cx Ind Hitch, 2.29 Wide
| 33***73 | Blade, Rubber | 1 |
| 33***74 | Plate, Support | 1 |
| 33***75 | Kit, Nut & Bolt | 8 |
S1-1-10 Sweeper 7', Q Hitch, 2cx, 2dx M/C'S.
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 33***56 | Sweeper, 7' Water Sprinkler, Q Hitch Frame Mount | 1 |
S1-2-1 Sweeper 7', Canopy, Shroud Assembly
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 12 |
| 13***8Z | Bolt, M10 X 30 | 4 |
S1-1-1 Sweeper 7', Q Hitch, Zettlemeyer, 407b, 408b, 409b M/C'S.
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 33***56 | Sweeper, 7' Water Sprinkler, Q Hitch Frame Mount | 1 |
S1-3-1 Frame, Q/Hitch 980/89010, 7' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S1-1-30 Sweeper 7', Q Hitch, 520-50, 525-50 M/C'S.
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 33***56 | Sweeper, 7' Water Sprinkler, Q Hitch Frame Mount | 1 |
S1-1-40 Sweeper 7', Fork Frame Mounting
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 33***56 | Sweeper, 7' Water Sprinkler, Q Hitch Frame Mount | 1 |
S1-2-5 Sweeper Collector, Gutter Brush
| 13***9Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
S1-2-3 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 9 |
S2-3-3 Frame, Q/Hitch &, Fork Mount 980/88993, 8' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S2-3-2 Frame, Q/Hitch 980/88990, 8' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S2-3-4 Frame, Fork Mounting, 980/88991
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S2-2-4 Sweeper Collector, Hydraulic Circuit, Gutter Brush Option
| 14***18 | Seal, Bonded, 1/2" Bsp | 12 |
| 16***04 | Adapter, Male/Male | 6 |
| 20***35 | Motor | 1 |
S2-2-5 Sweeper Collector, Gutter Brush
| 13***9Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
S2-1-10 Sweeper 8', Fork Mounted Frame
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 1/2" Bsp Female, Quick Release | 1 |
S2-3-1 Frame, Q/Hitch 980/88992, 8' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
S2-1-30 Sweeper 8', Q Fit & Fork Mounted
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 1/2" Bsp Female, Quick Release | 1 |
S2-2-6 Sweeper Collector, Sprinkler Assembly
| 13***9Z | Bolt, M12x35 Grade 8.8 | 4 |
| 13***2Z | Bolt, M12 X 120 | 2 |
| 13***3Z | Nut, M12 | 14 |
S2-2-1 Sweeper 8', Canopy, Shroud Assembly
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 12 |
| 13***8Z | Bolt, M10 X 30 | 4 |
S2-2-2 Sweeper Collector, Brush Core Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 22 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 2 |
S2-1-20 Sweeper 8', Q Fit Frame
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 1/2" Bsp Female, Quick Release | 1 |
S2-2-3 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 9 |
S2-1-2 Sweeper, R/H Base Unit
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 54 |
S2-2-7 Sweeper Collector, Decal
| 81***42 | Decal, Warning, Before Operating | 4 |
| 81***02 | Plate, Data | 1 |
| 81***90 | Decal, Jcb, Insignia 375 X 300mm | 1 |
S2-1-1 Sweeper 8', Q Hitch, 3cx, 4cx M/C'S.
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 1/2" Bsp Female, Quick Release | 1 |
S3-2-4 Sprinkler, System, Sc240/210
| 12***55 | Cap, Hydraulic Filler, Non Lockable; Replaced By Mss Use The Following Parts 123/0, 4930 + 70***01 Key. See San05966 | 1 |
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
S3-2-1 Canopy, Sweeper, Sc240/210
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Bolt, M8 X 55 | 4 |
| 13***0Z | Bolt | 12 |
S3-2-2 Brush Core, Sweeper, Sc240/210
| 13***7Z | Screw, Hexagon M8 X 25 | 22 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 2 |
S3-2-3 Hydraulic Circuit, Sweeper, Sc240/210
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 9 |
T Sweeper, Sc150/180
T1-2-3 Sweeper, Sc180 980/A4034
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
T1-2-1 Sweeper, Sc150 980/A4032
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
T1-3-2 Sweeper, Sc180
| 33***03 | Sweeper Collector Sc180 A, Ga - Sweeper Collector (S | 1 |
| 33***20 | Bolt, . | 13 |
| 33***21 | Bolt, M20 X 150mm | 2 |
T1-1-1 Gutter Brush, Sc150/180 980/A4677
| 13***2Z | Bolt, M8x50 | 6 |
| 13***4Z | Bolt, M8 X 60 | 1 |
| 13***0Z | Bolt, M12x40 | 2 |
T1-3-1 Sweeper, Sc150
| 33***01 | Sweeper Collector Sc150 A, Sweeper Collector Abi (Sc | 1 |
| 33***20 | Bolt, . | 13 |
| 33***05 | Bucket, . | 1 |
T1-2-2 Sweeper, Sc150 980/A4033
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
Frequently asked questions
What engine does the JCB Sweeper use?
The JCB Sweeper is an attachment and does not have its own engine. It is powered hydraulically by the carrier machine, such as a JCB skid steer loader, 1CX excavator, or Loadall telehandler.
What is the operating weight of the JCB Sweeper?
The operating weight of the JCB Sweeper varies by configuration and specific model (e.g., SC240). It is not a standalone machine with a fixed operating weight but depends on the attached carrier machine's specifications.
What replaced the JCB Sweeper?
The JCB Sweeper is part of a continuous line of sweeper collectors. There is no specific successor model that replaced it; rather, it is updated with new configurations and compatible carrier machines over time.
What SWEEPER owners discuss
What are the known powertrain and hydraulic behaviors of the JCB Sweeper Collector attachments (SC150, SC210, SC240)?
The SC210 and SC240 models utilize direct drive motors to deliver high torque for consistent sweeping performance. The units feature a floating frame system that automatically follows ground contours to maintain output. Operation of both the sweeping brush and the hopper emptying mechanism is hydraulic and controlled from the carrier machine's cab. The SC240 requires a mounting frame and auxiliary pipework (5/8 inch) for continuous operation on 3CX/4CX/5CX backhoe loaders. The SC210 fits 2CX models with a Quickhitch MkII pick-up. The SC150 fits 1CX/1CXT machines.
What undercarriage or wear patterns are typical for JCB machines that use these sweepers?
JCB excavators and loaders are noted for having hoses routed through the dig end or protected channels to maximize resistance against damage and wear. Hydraulic connections utilize O-ring face seals to protect against leaks. Undercarriage designs often include sloping surfaces to facilitate rapid turnaround and cleaning. For machines operating in heavy dust environments (e.g., quarries, dry agricultural land), standard air filtration can be overwhelmed by fine particulate, leading to accelerated piston ring and bore wear; cyclone pre-filters are recommended to extend component life.
What engine quirks are associated with the JCB 444 engines found in these machines?
JCB 444 engines exhibit failure patterns dependent on their generation. Early Dieselmax engines (Tier 2 and early Tier 3) are prone to big end bearing failures on the crankshaft, particularly if oil change intervals are extended or oil quality is poor. Fuel injection pump faults are also common on these earlier mechanical and early electronic variants. Later engines (Tier 4i and T4 Final EcoMax) are more sensitive to fuel quality; faulty injectors are a common issue, causing rough running, white smoke, or poor starting. These common rail engines require diagnostic software to read fault codes for accurate diagnosis of no-start conditions or power loss.
What are common electrical or sensor issues reported by operators?
Operators report that electrical faults can cause intermittent operation or failure to engage. On older models, the forward/reverse lever operates microswitches that activate hydraulic solenoids on the transmission body; failure of these components can result in the machine revving but not moving. On newer skid steer and telehandler platforms, faulty joysticks have been reported to cause control systems to 'brick' or lock up, often leaving stored trouble codes that persist despite repairs. Wiring harnesses on some newer compact machines have been noted to use white insulation, which can make fault tracing difficult for technicians accustomed to standard color coding.
What should be checked when buying a used JCB Sweeper Collector attachment?
Verify the carrier machine compatibility: the SC240 requires specific mounting frames and auxiliary pipework for continuous operation on 3CX/4CX/5CX backhoes, while the SC210 requires a 2CX Quickhitch MkII pick-up. Inspect the direct drive motors for torque integrity and check the large capacity bucket for structural damage. Ensure hydraulic quick-connect and O-ring face sealed connections are free of leaks. Confirm the condition of the heavy-duty canopy and steel/polypropylene brush segments. Check that in-cab hydraulic controls for sweeping and hopper emptying function correctly without lag or failure.
What is the critical safety procedure for installing or removing the sweeper on a Quickhitch system?
Align the carrier machine square to the attachment. Lower the loader arm fully to bring the hitch plate below the level of the lips on the attachment. Ensure the locking levers are moved fully out beyond the sides of the hitch plate before engagement. Do not attempt to install, operate, or maintain the attachment until the operator has read and understood the relevant documentation for both the attachment and the carrier machine. Have your dealer verify the hitch plate alignment and lock engagement before operation.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb SWEEPER. Related factory variants of the same model family:
SWEEPER-SWEEPERSWEEPER
Need a specific SWEEPER part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.