JCBjcb indiaskid steer loaders (robot)
Jcb ROBOT 180T(TRACKED)
Maintenance schedule, common problems & OEM parts breakdown
The JCB Robot 180T is a compact track loader introduced in 2006 and produced through 2013, filling the tracked segment of the Robot skid-steer family. Powered by a 60 hp (44.74 kW) turbocharged 404C-22T diesel engine, the machine weighs approximately 3,630 kg (8,002.8 lb) in standard configuration. It offers a 1,800 lb (816 kg) operating capacity with a 66-inch (1.68 m) track width and an 81-inch (2.06 m) turning radius. Configurations include standard flow (15 GPM) and high-flow (32 GPM) hydraulic packages. The Robot 180T succeeded earlier wheeled Robot models and was joined by the Robot 160 and 170 in the compact line, serving as the tracked counterpart for soft-ground and landscaping applications.
Across its production run, the Robot 180T evolved from its wheeled Robot predecessors by integrating a hydrostatic drive system with a dedicated track frame assembly, idler wheels, and drive motors. The machine matters in the used and parts market because its simple, non-DEF Dieselmax engine and straightforward hydraulic circuitry make it highly serviceable for light construction and municipal work. The 180T's compact footprint and tracked traction provide a niche alternative to wheeled skid-steers in muddy or uneven terrain, maintaining demand for its specific undercarriage components and engine parts among fleet managers seeking low-hour, reliable compact equipment.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb ROBOT 180T(TRACKED) specifications
Engine
| Model | 404C-22T |
| Gross Power | 44.74 kW (60 hp) |
| Displacement | 2,195.87 cu cm |
| Cylinders | 4 |
| Aspiration | Turbocharged |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 3,630 kg (8,002.8 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | 0.35 bar |
Dimensions
| Transport Length | 3.34 m (10 ft 11 in) |
| Transport Width | 1.68 m (66 in) |
| Transport Height | 1.93 m - 1.95 m |
| Track Gauge | 1.37 m |
| Ground Clearance | 0.23 m |
Performance
| Travel Speed | 10 km/h - 11.1 km/h |
| Lifting Capacity | 820.01 kg (1,896 lb at 35%) |
| Breakout Force | 2,573.01 kg |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 80.24 L |
| Hydraulic System | 30.28 L |
| Engine Oil | 9.84 L |
| Cooling System | 10.22 L |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb ROBOT 180T(TRACKED) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the ROBOT 180T(TRACKED) beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor hydraulic oil condition at the 500-hour interval to detect pump wear before failure. Check the hydraulic return filter magnet for metallic debris during every filter change. Sample engine oil at 500 hours to establish a baseline for the 404C-22T turbocharged engine. Inspect the coolant expansion tank for contamination or oil mixing. Track drive chain tension weekly to prevent premature sprocket wear. Verify track tension to avoid excessive roller drag and fuel consumption.
Corrective & Common Repairs
Replace drive chain segments when elongation exceeds limits to protect the transmission output. Repair track damage promptly to prevent idler wheel gouging. Bleed the fuel system after filter changes to ensure reliable cold starts. Inspect loader arm pivot pins for elongation that causes binding. Check the alternator belt for glazing or cracking that reduces charging capacity. Test the parking brake mechanism for proper engagement and release.
Overhaul & Rebuild Points
Rebuild drive motors when track slip occurs despite proper tension and hydraulic pressure. Inspect the track frame assembly mounting bolts for fatigue cracking at the front and rear points. Check the loader arm lift ram seals for external leakage that indicates cylinder wear. Evaluate the turbocharger shaft play and boot condition for boost loss. Replace the hydraulic tank breather if contamination enters the system. Inspect the track frame rollers for flat spots or bearing noise.
Seasonal & Environment Servicing
Clean the coolant radiator and charge air cooler fins monthly in dusty environments to prevent overheating. Check the battery electrolyte level and terminal security before winter operation. Inspect the cab heater and air conditioning components for proper function. Verify the windscreen washer fluid level and nozzle spray pattern. Grease all pivot points more frequently in wet or muddy conditions to flush out debris. Check track tension after temperature changes to maintain proper ground contact.
ROBOT 180T(TRACKED) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/401102 | Kit-Element, Fuel Filter, Short | Fuel system service | Check fitment → |
| 02/100284 | Element, Oil Filter, Canister Type-Short | Lubrication service | Check fitment → |
| 02/630935 | Element, Engine Oil Filter | Lubrication service | Check fitment → |
| 32/910601 | Element, Oil Filter, Transmission 22 Microns | Lubrication service | Check fitment → |
| 332/P4109 | Label, Filter Checking | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
ROBOT 180T(TRACKED) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Clogged fuel filters or failing lift pump | Check fuel filter condition and fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor or wiring issue | Inspect sensor wiring and test sensor resistance |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low oil level | Check oil level and test sensor signal |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Open circuit in reductant injector wiring | Inspect injector connector and wiring harness |
| U0100 | Lost communication with Engine Control Module (ECM) | Loose battery terminals or damaged CAN bus wiring | Check battery voltage and ground connections |
| 101 | Low transmission clutch pressure detected | Hydraulic pump issue or pressure relief valve fault | Check hydraulic fluid level and pressure settings |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Faulty crank sensor or damaged wiring | Inspect sensor and wiring for damage |
| P0336 | Torque Reduction Crank Sensor Fault (Signal Fault) | Crank sensor signal out of limits | Test crank sensor output and wiring |
| P0100 | Torque Reduction AMF High Side Driver fault | Open or short circuit in air mass flow sensor driver | Check AMF sensor wiring and connections |
| P0101 | MAF Sensor Fault | Mass air flow sensor malfunction | Inspect MAF sensor and clean if necessary |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
ROBOT 180T(TRACKED) attachments & work tools
Buckets & Shovels
The Robot 180T utilizes a universal skid steer quick hitch for standard attachment mounting. Typical bucket capacities range from 0.36 m³ (0.47 cu yd) to 0.46 m³ (0.60 cu yd) depending on the specific configuration and series. General purpose, light duty, and 6-in-1 shovel variants are supported by the standard loader arm geometry.
Material Handling & Grapples
Pallet forks and manure/silage forks with top grab are standard attachment families for this machine class. Heavy-duty grapples, such as root rakes and log splitters, are compatible with the universal quick hitch system. These tools leverage the machine's 1,800 lb (816 kg) operating capacity for light construction and landscaping tasks.
Ground Engaging & Trenching
Compatible tools include trenchers, hydraulic augers, and stump grinders requiring auxiliary hydraulic flow. The machine offers standard flow (15 GPM) and optional high-flow (32 GPM) circuits to power demanding attachments. High-flow configurations enable the use of more powerful hydraulic tools without performance loss.
Snow & Sweeping
Snow pushers, sweepers, and dozer blades are commonly used attachments for this tracked model. The 66-inch (1.68 m) track width provides stability for side-draft forces generated by snow and debris tools. These attachments utilize the standard quick-release coupler system for rapid deployment.
Couplers & Mounting Systems
The machine is equipped with an industry-approved universal skid steer quick hitch as standard equipment. This system allows for the rapid connection and disconnection of compatible third-party attachments. The quick hitch pivot pins require greasing every 10 hours to maintain smooth operation.
Hydraulic & Power Options
The Robot 180T is powered by a 60 hp (44.74 kW) turbocharged 404C-22T diesel engine. Hydraulic pressure is rated at 3,000 PSI (207 bar) for both standard and high-flow configurations. The high-flow option increases hydraulic horsepower from 31 HP to 56.9 HP to support high-demand attachments.
All ROBOT 180T(TRACKED) assemblies by section
Every catalogued assembly group for the Jcb ROBOT 180T(TRACKED). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-1-1 Shovel G.P., 0.37 Cu.M
| 33***07 | Toeplate, 1560mmx 15mmx 150mm, Drilled | 1 |
| 33***85 | Strip, Wear | 2 |
| 33***41 | Sidecutter | 2 |
A1-11-1 Shovel, Light Duty, 1730mm, 0.48 Cu.M.
| 24***09 | Shovel, Light Duty 1730mm, 0.48 Cu.M. | 1 |
| 33***41 | Strip, Wear | 2 |
| 33***85 | Toeplate, 1730 Wide | 1 |
A1-1-2 Shovel G.P., 0.29 Cu.M, 1430mm
| 33***06 | Toeplate, 1410 Mmx 15mmx 150mm, Drilled | 1 |
| 33***85 | Strip, Wear | 2 |
| 33***41 | Sidecutter | 2 |
A1-6-1 Shovel G.P., 1397mm, 0.28cu.M.
| 51***06 | Toeplate | 1 |
| 51***00 | Shovel, G.P., 1397mm, Dirt | 1 |
A1-9-1 Shovel, Light Duty, 1430mm, 0.40 Cu.M.
| 24***07 | Shovel, Light Duty, 1430mm, 0.40 Cu.M. | 1 |
| 33***41 | Strip, Wear | 2 |
| 51***62 | Sidecutter | 2 |
A1-8-1 Shovel G.P., 1728mm, 0.36cu.M.
| 51***08 | Toeplate | 1 |
| 51***00 | Shovel, G.P., 1728mm, Dirt | 1 |
A1-12-1 Guard, Tooth
| 13***0D | Setscrew, M10 X 40mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, Spring, M10 | 4 |
A1-7-1 Shovel G.P., 1560mm, 0.34cu.M.
| 51***07 | Toeplate | 1 |
| 51***00 | Shovel, G.P., 1560mm, Dirt | 1 |
A1-5-1 Shovel, Low Back, 1397mm, 0.28cu.M
| 13***1Z | Nut | 0 |
| 51***00 | Shovel, Low Back, 1397mm | 1 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 0 |
A1-2-1 Shovel, Low Back, 1560mm
| 13***1Z | Nut | 0 |
| 51***03 | Toeplate | 1 |
| 51***00 | Shovel, Low Back 1560mm | 1 |
A1-1-3 Shovel G.P., 1730mm Wide
| 24***52 | Shovel, G.P. Hi-Performance, 1730mm Wide | 1 |
| 33***04 | Toeplate, 1710mmx 15mmx 150mm, Drilled | 1 |
| 33***05 | Strip, Wear | 2 |
A1-10-1 Shovel, Light Duty, 1580mm, 0.57 Cu.M.
| 24***08 | Shovel, Light Duty 1580mm, 0.57 Cu.M. | 1 |
| 33***20 | Strip, Wear | 1 |
| 51***62 | Sidecutter | 2 |
A1-4-1 Toeplate, Bolt On
| 13***1Z | Nut | 9 |
| 51***78 | Toeplate, 1397mm | 1 |
| 51***79 | Toeplate, 1560mm | 1 |
A1-3-3 Shovel, Low Back, 1730mm, 242/20658
| 24***58 | Shovel, Low Back, 1730mm | 1 |
| 24***88 | Shovel, Low Back,1730mm . | 1 |
| 33***46 | Toeplate | 1 |
A1-3-1 Shovel, Low Back, 1728mm
| 13***1Z | Nut | 0 |
| 51***04 | Toeplate | 1 |
| 51***00 | Shovel, Low Back, 1728mm | 1 |
A2-1-1 Bucket, Standard, Backhoe Attachment
| 98***00 | Bucket, 200mm (8") | 1 |
| 98***00 | Bucket, 300mm (12") | 1 |
| 98***00 | Bucket, 450mm (18") | 1 |
A3-11-3 Trencher Model 15c, 980/88419
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 2 |
A3-13-3 Controls, Backhoe Attachment
| 13***3Z | Screw, M6x16 | 4 |
| 13***2Z | Nut, M8 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
A3-13-0 Attachment Backhoe
| 98***00 | Attachment, Backhoe | 1 |
| 98***00 | Attachment, Backhoe, With Auxiliary. Circuit | 1 |
A3-35-2 Gpr 1820, Main Assembley, 980/90545
| 33***86 | Mounting, . | 1 |
| 33***88 | Strap, . | 2 |
| 33***89 | Washer, . | 1 |
A3-2-3 Stump Grinder, Cutting Wheel
| 33***49 | Wheel, Square Tooth | 1 |
| 99***23 | Kit, Tooth And Nut | 1 |
A3-8-1 Fork Carrier
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
| 29***33 | Plate, Locking | 2 |
A3-13-2 Attachment Backhoe, Mainframe, And Related Parts
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
A3-12-1 Shovel, Clam, 6 In 1
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***5Z | Bolt | 2 |
A3-35-3 Gpr 1820, Roller Frame, 980/90545
| 33***74 | Washer, . | 1 |
| 33***75 | Roller, Toothed | 1 |
| 33***77 | Frame, . | 1 |
A3-2-7 Stump Grinder, Ram, Swing
| 33***27 | Piston | 1 |
| 33***28 | Gland | 1 |
| 33***30 | Bush | 1 |
A3-3-10 Earth Drill, Kit No 980/A4324
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
A3-2-5 Stump Grinder, Control Valve, Detail
| 25***48 | Valve, Check | 1 |
| 25***49 | Valve, Pressure Compensatio | 1 |
| 25***50 | Valve, Check | 1 |
A3-4-5 Rockbreaker, Hm165q, 980/90368
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A3-2-8 Stump Grinder, Ram, Lift
| 33***27 | Piston | 1 |
| 33***28 | Gland | 1 |
| 33***30 | Bush | 1 |
A3-13-1 Attachment Backhoe, Boom And Dipper
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 13***2Z | Nut, M12 | 0 |
A3-35-4 Gpr 1820, Caster Wheel, 980/90545
| 33***69 | Bolt, . | 1 |
| 33***72 | Shaft, . | 1 |
| 33***81 | Spacer, Long | 1 |
A3-5-2 Earth Drill Jcb 1650, Components
| 98***90 | Kit, Power Head | 1 |
| 98***92 | Kit, Earth Drill | 1 |
| 98***74 | Sprocket | 1 |
A3-2-2 Stump Grinder, Mainframe
| 33***32 | Ram | 1 |
| 33***33 | Ram | 1 |
| 33***16 | Screw | 2 |
A3-13-4 Attachment Backhoe, Mountings
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 5 |
| 13***4Z | Bolt, M16x60 | 4 |
| 13***3Z | Nut, M16 | 9 |
A3-11-6 Trencher, Decals
| 81***42 | Decal, Warning, Before Operating | 1 |
| 81***75 | Decal, "Jcb"Trencher | 2 |
| 81***02 | Decal, Caution,No Step | 1 |
A3-35-1 Ground Preperation, Rake, Gpr 1820
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 16***06 | Adapter, 3/4" Bsp M/M | 3 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-3-1 Earthdrill, Dm1200, From 08/2007
| 98***94 | Kit, Drillmaster 1200, Auger | 1 |
A3-4-10 Rockbreaker, Hm265q, 980/90366
| 13***7D | Bolt, M16x75 | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A3-7-1 Fork, Manure & Silage
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***57 | Adapter | 2 |
| 45***00 | Coupling, 3/4 Bsp, Female, Quick Release Type A | 2 |
A3-5-1 Earth Drill Jcb 1650, Installation
| 13***3D | Bolt, M8 X 55mm | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A3-2-4 Stump Grinder, Hydraulics
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-2-6 Stump Grinder, Hydraulic Motor, Gearbox
| 20***23 | Motor | 1 |
| 33***21 | Screw | 2 |
| 33***31 | Pin | 1 |
A3-20-1 Kit, Auxilliary Hydraulic, Page Superseded See Index E1 For Details
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Bolt, M6 X 25 | 2 |
A3-4-15 Rockbreaker, Hm265q, 980/90369
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A3-2-9 Stump Grinder, Control Handle, Harness
| 72***55 | Harness, Control Handle | 1 |
| 72***56 | Harness, Solenoid Connectors | 1 |
A3-1-1 Quickhitch
| 13***9D | Screw, M16x35lg | 2 |
| 13***0D | Bolt, M10 X 40mm Long | 2 |
| 13***8D | Bolt, M10 X 80 | 2 |
A3-4-1 Rockbreaker, Hm165q, 980/90355
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A3-6-1 Kit, Bucket Retention
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
A3-2-1 Stumpgrinder
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***06 | Adapter, 3/4" Bsp M/M | 3 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
B Bodywork, Cab, Loader End
B1-8-1 Fuel, Filler Extension
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
B1-14-10 Guard, Auxiliary Hose, Demolition
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 14***8D | Washer, M10 | 3 |
| 33***10 | Guard, Auxiliary Hose | 1 |
B1-4-1 Cover, Hydraulic Motor
| 13***7D | Setscrew, M8x25 | 8 |
| 14***7D | Washer, M8 Plain | 8 |
| 17***03 | Plug, Blanking | 1 |
B1-3-5 Counterweight, Std. 160
| 13***8D | Capscrew | 4 |
| 14***1D | Washer, M16 | 4 |
| 33***21 | Cover, Rh Boss | 1 |
B1-12-1 Guard, Frame,Rear Door
| 13***4D | Bolt, M24x140mm Lg | 2 |
| 13***3D | Nut, Lock M24 | 2 |
| 14***4D | Washer | 4 |
B1-6-1 Engine Cover
| 12***32 | Stop | 2 |
| 12***87 | Handle, Locking | 1 |
| 13***07 | Bolt, M8 X 25 | 4 |
B1-3-1 Counterweight
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 13***8D | Capscrew | 6 |
| 14***7D | Washer | 6 |
B1-8-2 Fuel, Filler Extension
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
| 13***3D | Nut, M6 Lock | 1 |
| 14***6D | Washer, M6 Plain | 1 |
B1-5-1 Lh Fender, Lh Console Pivots, Wheeled M/C
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 5 |
| 13***3D | Nut, Self Lock M10 | 4 |
B1-1-1 Chassis And Fittings
| 13***7Z | Screw, M6 X 25mm Long | 5 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B1-7-1 Soundproofing, Option
| 24***68 | G.A. | 0 |
| 24***73 | G.A. | 0 |
| 33***84 | Panel, Soundproofing, Rear Grille Slats | 5 |
B1-2-1 Tank, Hydraulic
| 12***53 | Gauge, Sight | 1 |
| 13***7D | Setscrew, M8x25 | 11 |
| 13***8D | Setscrew, M8 X 30mm | 3 |
B1-4-10 Covers, Track Motors
| 13***5D | Setscrew, M8x20 | 6 |
| 14***7D | Washer, M8 Plain | 6 |
| 33***60 | Cover, Lh Track Motor | 1 |
B1-16-1 Brackets, Front Lights, Mirrors
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
B1-18-1 Brackets, Toolbar
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut | 4 |
| 33***45 | Bracket, Rh | 1 |
B1-5-20 Rh Fender
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
B1-1-10 Chassis And Fittings
| 13***7Z | Screw, M6 X 25mm Long | 5 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M16x25 | 4 |
B1-17-1 Brackets, Rear Light
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
B1-14-1 Rear Grille
| 33***78 | Grille, Rear Wa | 1 |
| 33***46 | Grille, Rear Wa | 1 |
| 82***10 | Washer, Plain | 2 |
B1-5-10 Lh Fender, Lh Console Pivots, Tracked M/C
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
B2-7-20 Guard, Roof
| 13***2D | Setscrew, M16 X 50mm | 8 |
| 14***1D | Washer, M16 | 8 |
| 24***37 | G.A. | 0 |
B2-15-1 Seat, Suspension,Cloth
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***2D | Washer, Large | 4 |
| 24***64 | G.A., Cloth Suspension, Seat | 1 |
B2-16-1 Seat Belt, Inertia Reel
| 13***7D | Setscrew, M8x25 | 1 |
| 13***0D | Setscrew, M10 X 40mm | 1 |
| 13***7D | Setscrew, M12 X 25 | 1 |
B2-1-11 Cab, Assembly, Tracked Machine
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***6D | Bolt, M8x70 | 1 |
| 13***7D | Bolt, M8 X 75mm Long | 1 |
B2-3-20 Grab Handle, Cab/Canopy
| 13***5D | Setscrew, M8x20 | 2 |
| 13***1D | Nut, M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
B2-2-1 Canopy Assembly, Wheeled Machines
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***3D | Bolt, M6 X 25 | 4 |
| 13***7D | Bolt, M8 X 75mm Long | 2 |
B2-18-1 Console, Assembly Lh
| 13***9D | Setscrew, M8x35 | 2 |
| 13***2D | Nut, Thin | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
B2-4-1 Door,Cab, Wheeled Machines
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***05 | Gasket, Door Handle | 1 |
B2-2-2 Canopy, Assembly, Wheeled Machines
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***7D | Bolt, M8 X 75mm Long | 2 |
| 13***1D | Nut, M8 | 7 |
B2-9-1 Cab Interior, Panels And Floormat
| 13***5D | Setscrew, M8x20 | 6 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Bolt, M6 X 25 | 4 |
B2-10-2 Seat Base, Cab/Canopy
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***99 | Plate, Seat Base,Canopy | 1 |
B2-20-5 Lift Frame, Single Point Lift
| 13***2D | Setscrew, M16 X 50mm | 8 |
| 14***1D | Washer, M16 | 8 |
| 24***39 | G.A. | 0 |
B2-13-1 Seat, Static,Cloth
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***2D | Washer, Large | 4 |
| 24***63 | G.A., Cloth Static Seat | 1 |
B2-3-1 Glazing, Cab/Canopy
| 24***77 | Knob | 4 |
| 33***71 | Pad, Clamp | 4 |
| 33***13 | Seal, Flock Section | 1 |
B2-6-1 Roof Lining
| 14***04 | Screw, Self Tapping | 4 |
| 33***24 | Liner, Roof | 1 |
| 33***22 | Liner, Head | 1 |
B2-1-14 Dust Seals,Cab, Tracked Machine
| 24***50 | G.A. | 0 |
| 33***31 | Seal, Cab Side | 1 |
| 92***00 | Strip, Foam, Roll | 0 |
B2-1-1 Cab Assembly, Wheeled Machines
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***3D | Bolt, M6 X 25 | 4 |
| 13***7D | Bolt, M8 X 75mm Long | 2 |
B2-22-1 Visor, Sun
| 13***1D | Setscrew, M5 X 12mm Long | 2 |
| 14***5D | Washer | 2 |
| 33***90 | Blind, Roller | 1 |
B2-8-1 Guard, Front Working Lights, Cab Mounted
| 13***9D | Screw, M16x35lg | 4 |
| 14***1D | Washer, M16 | 4 |
| 33***61 | Guard, Light Rh | 1 |
B2-7-1 Guard,Front Screen, Canopy, Without Front Glazing Screen Fitted
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Hardened | 2 |
| 24***77 | Knob | 4 |
B2-20-1 Lifting Brackets
| 13***2D | Setscrew, M16 X 50mm | 8 |
| 14***1D | Washer, M16 | 8 |
| 24***36 | G.A. | 0 |
B2-1-4 Dust Seals,Cab, Wheeled Machine
| 24***49 | G.A. | 0 |
| 33***31 | Seal, Cab Side | 1 |
| 92***00 | Strip, Foam, Roll | 0 |
B2-12-2 Seat, Vinyl
| 33***03 | Frame, Seat Shell | 1 |
| 33***05 | Insert, Seat | 1 |
| 33***09 | Seat, Pad | 1 |
B2-12-1 Seat, Static,Vinyl
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***2D | Washer, Large | 4 |
| 24***61 | G.A., Vinyl Static Seat | 1 |
B2-14-1 Seat, Suspension,Vinyl
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***2D | Washer, Large | 4 |
| 24***62 | G.A., Vinyl Suspension, Seat | 1 |
B2-21-1 Mirrors, Exterior & Interior
| 12***00 | Mirror, With Bracket | 2 |
| 12***01 | Bracket | 1 |
| 13***1Z | Nut, M5-8 | 2 |
B2-17-1 Rear Exit, Option
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 24***56 | G.A. | 0 |
| 25***03 | Ring, Key | 1 |
B2-1-25 Mountings, Cab/Canopy
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***1D | Bolt, M16 X 110 | 4 |
| 13***3D | Nut, M16 | 4 |
B2-2-11 Canopy, Assembly, Tracked Machines
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***6D | Bolt, M8x70 | 1 |
| 13***7D | Bolt, M8 X 75mm Long | 1 |
B2-5-1 Door,Canopy, Wheeled Machines
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***05 | Gasket, Door Handle | 1 |
B2-5-10 Door,Canopy, Tracked Machines
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***05 | Gasket, Door Handle | 1 |
B2-10-1 Seat Base, Canopy
| 13***7D | Setscrew, M8x25 | 9 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 13 |
B2-16-10 Seat Belt, 3" Static
| 13***2D | Bolt, M10 X 50mm | 2 |
| 13***2D | Bolt | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
B2-3-10 Glazing, Rear Screen, Fitted With Air Conditioning
| 33***26 | Seal | 1 |
| 33***71 | Glass, Rear Screen, Glass, Rear Screen; Air Con Machine Builds Only. Refer To B2-3-10 For Additional Information | 1 |
| 33***94 | Plate, Rear Screen A/C | 1 |
B2-7-10 Guard,Front Screen, Cab, Canopy With Front Glazing Screen Fitted
| 13***7D | Setscrew, M8x25 | 6 |
| 14***7D | Washer, M8 Plain | 6 |
| 33***48 | G.A. | 0 |
B2-2-10 Canopy Assembly, Tracked Machines
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***3D | Bolt, M6 X 25 | 4 |
| 13***7D | Bolt, M8 X 75mm Long | 2 |
B2-3-11 Glazing, Rear Screen, Fitted With Air Conditioning
| 29***00 | Jet, Washer, Assembly | 1 |
| 33***00 | G.A, Rear Screen A/C | 1 |
| 33***01 | Plate, A/C Rear Scree | 1 |
B2-4-10 Door,Cab, Tracked Machines
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***05 | Gasket, Door Handle | 1 |
B2-1-10 Cab Assembly, Tracked Machines
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***3D | Bolt, M6 X 25 | 4 |
| 13***7D | Bolt, M8 X 75mm Long | 2 |
B2-1-2 Cab, Assembly, Wheeled Machines
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***6D | Bolt, M8x70 | 1 |
| 13***7D | Bolt, M8 X 75mm Long | 1 |
B3-5-1 Travel Strut, Italy
| 12***44 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 24***95 | Insert, Rubber | 2 |
B3-1-1 Arm, Loader
| 13***0D | Setscrew, M16 X 40mm | 1 |
| 13***8D | Bolt, M10 X 80 | 1 |
| 13***9D | Bolt | 4 |
B3-3-1 Guard, Ram And Hose, Loader Arm
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***9Z | Washer | 2 |
B3-4-1 Travel Link, Italy
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 33***63 | Link, Travel | 1 |
| 33***55 | Bracket, Stowage | 2 |
B3-3-10 Cover, Hoses, Loader Arm
| 13***5D | Setscrew, M8x20 | 5 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
B3-2-1 Safety Strut
| 12***70 | Strut, Safety, 650mm | 1 |
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
B5-16-1 Decals, Warning, Finnish
| 24***32 | G.A. | 0 |
| 81***42 | Label, Warning Finnish, Read Operating Book | 1 |
| 81***36 | Label, Instruction, Safety Strut,Finnish | 1 |
B5-2-5 Decals, Warning
| 24***37 | G.A. | 0 |
| 81***95 | Decal, Warning, Disconnect Battery | 1 |
| 81***97 | Label, Danger, Fluid Under Pressure | 1 |
B5-2-1 Decals, Warning
| 24***24 | G.A. | 0 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***69 | Label, Tank Level | 1 |
B5-20-1 Fire Extinguisher, 2.5kg
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
B5-10-2 Greaser, Mounting Brackets
| 13***3D | Setscrew | 2 |
| 13***1D | Nut, Plain | 2 |
| 14***6D | Washer, M6 Plain | 4 |
B5-10-1 Tool Kit
| 12***01 | Strap | 2 |
| 27***00 | Bag, Tool | 1 |
| 40***27 | Grease, Cartridge, 400g | 1 |
B5-12-1 Decals, Noise Level
| 81***69 | Label, Noise, (87lpa) | 1 |
| 81***70 | Label, External Sound Press, 88 Lwa | 1 |
| 81***71 | Label, Sound Level, 89lpa | 1 |
B5-5-1 Decals, Warning, French
| 24***27 | G.A. | 0 |
| 81***43 | Label, Warning French, Read Operating Book | 1 |
| 81***63 | Label, Danger, Loader Arm, French | 1 |
B5-1-2 Decals, Electrical
| 33***30 | Decal, Fuse And Relay | 1 |
| 81***52 | Label, Battery, Isolator | 1 |
| 81***98 | Decal, Primary Fuse | 1 |
B5-15-5 Decals, Silver, Jcb Insignia
| 33***34 | Decal, 160 Series Ii,(Cab), Silver,172mm Long | 1 |
| 33***26 | Decal, 180t Series Ii(Cab), Silver,222mm Long | 1 |
| 33***08 | Decal, 180 Series Ii(Cab), Silver,172mm Long | 1 |
B5-17-1 Decals, Warning, Dutch
| 24***33 | G.A. | 0 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***91 | Label, Danger, Loader Arm, Dutch | 1 |
B5-8-1 Decals, Warning, Portuguese
| 24***30 | G.A. | 0 |
| 81***47 | Label, Warning Portuguese, Read Operating Book | 1 |
| 81***97 | Label, Danger, Loader Arm, Portugese | 1 |
B5-3-1 Decals, Warning, German
| 24***25 | G.A. | 0 |
| 81***44 | Label, Warning German, Read Operating Book | 1 |
| 81***37 | Decal, Grease Points | 10 |
B5-6-1 Decals, Warning, Italian
| 24***28 | G.A. | 0 |
| 33***62 | Label, Loader Lock Warning | 1 |
| 81***45 | Label, Warning Italian, Read Operating Book | 1 |
B5-11-1 Decals, Controls
| 33***72 | Label, Foot Control Lh | 1 |
| 33***73 | Label, Foot Control Rh | 1 |
| 33***74 | Label, Forward & Reverse | 1 |
B5-10-10 Toolbar Holder, Air Con M/C Builds
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, M8 Locking | 2 |
| 14***7D | Washer, M8 Plain | 4 |
B5-9-1 Decals, Warning, Swedish
| 24***31 | G.A. | 0 |
| 81***49 | Label, Warning Swedish, Read Operating Book | 1 |
| 81***05 | Label, Warning, Fan, Swedish | 1 |
B5-7-1 Decals, Warning, Danish
| 24***29 | G.A. | 0 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***50 | Label, Danger, Loader Arm, Danish | 1 |
B5-18-11 Decals, Common Parts, Warning Labels Etc, Iso Decal En 474
| 33***09 | Label, Filter Checking | 1 |
| 33***27 | Label Iso-10b | 2 |
| 33***34 | Label Iso-07e | 2 |
B5-1-1 Decals, Electrical
| 81***52 | Label, Battery, Isolator | 1 |
| 81***98 | Decal, Primary Fuse | 1 |
| 81***99 | Decal, Fuses And Relays | 1 |
B5-13-1 Decals, Chevrons
| 33***74 | Decal, Chevron Rh | 1 |
| 33***77 | Decal, Chevron Lh | 1 |
B5-4-1 Decals, Warning, Spanish, Incl South American
| 24***26 | G.A. | 0 |
| 81***48 | Label, Warning Spanish, Read Operating Book | 1 |
| 81***96 | Label, Danger, Loader Arm, Spanish | 1 |
B5-15-3 Decals, Black And Silver
| 81***10 | Decal, Robot, Horizontal Format | 1 |
| 81***11 | Decal, Robot, Horizontal Format | 1 |
| 81***98 | Decal, 180t, Vertical Format | 1 |
B5-14-1 Decal, Low Sulpher Fuel
| 33***55 | Decal, Low Sulphur, Diesel Fuel | 1 |
| 33***57 | Decal, Low Sulphur, Diesel Fuel | 1 |
B5-15-1 Decals, Black And Silver
| 81***86 | Decal, 160 Hf, Vertical Format | 1 |
| 81***87 | Decal, 170 Hf, Vertical Format | 1 |
| 81***92 | Decal, 160, Vertical Format | 1 |
B5-18-1 Decals, Common Parts, Ansi Decal En 474
| 33***09 | Label, Filter Checking | 1 |
| 33***30 | Label Ansi-10b | 1 |
| 33***35 | Label Ansi-07e | 1 |
C Electrics-Machine, Cab & Engine
C1-1-1 Switches, Brake Light
| 24***05 | O Ring | 1 |
| 70***50 | Switch, Pressure 4 Bar | 2 |
| 71***00 | Timer, Brake Light | 1 |
C1-1-10 Switches, Sensors
| 26***01 | Clip, Connector | 1 |
| 70***35 | Switch, Vane Sensor | 2 |
| 70***52 | Switch, Pressure, 7 Bar | 1 |
C1-6-1 Fuse Box Link
| 13***1D | Screw, Set M6x12 | 2 |
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-4-1 Light, Beacon, Hazard Warning Std, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***00 | Beacon, 12v, (155mm Tall) | 1 |
C1-8-1 Battery
| 13***7D | Setscrew, M8x25 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 33***12 | Clamp, Battery | 1 |
C1-2-1 Reverse Alarm, Servo
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
C1-14-10 Harnesses, Lh Joystick, Multi Function Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 12 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***9D | Screw, M12x35mm Long | 1 |
C1-14-2 Harnesses, Including Ecu'S
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 7 |
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
C1-14-1 Harnesses, Including Ecu'S
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 7 |
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
C1-10-1 Light, Combination, Front
| 13***3Z | Nut | 4 |
| 13***4Z | Screw, 4ba X 3/4 Long | 4 |
| 14***9Z | Washer | 4 |
C1-8-10 Battery Isolator, Optional
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
C1-11-1 Light, Number Plate
| 70***00 | Light, Number Plate | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C1-9-1 Light, Rear
| 70***01 | Lens | 1 |
| 70***00 | Light, Rear | 2 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-3-1 Light, Working,Front & Rear
| 12***05 | Bracket | 3 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***3D | Nut, Self Lock M8 | 2 |
C1-5-1 Light, Beacon, Hazard Warning Tall, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Tall, (272mm) | 1 |
| 71***00 | Socket, Beacon | 1 |
C1-12-1 Horn
| 13***5D | Setscrew, M8x20 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
C1-7-1 Light, Front, Rh Dip
| 70***01 | Lens | 1 |
| 70***28 | Light, Head, 12v, Right Hand Dip | 2 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C1-8-20 Battery Cover, Optional
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 33***79 | Bracket, Terminal Cover | 1 |
| 82***80 | Retainer | 2 |
C2-3-1 Motor, Starter, Hp & Hr Build
| 71***00 | Motor, Starter, 12v | 1 |
| 71***02 | Solenoid | 1 |
| 71***06 | Holder, Brush | 1 |
C2-15-1 Alternator Mountings, Tier 3 404d-22
| 02***28 | Screw | 1 |
| 02***78 | Nut | 2 |
| 02***51 | Washer | 1 |
C2-5-1 Alternator Mountings, Hp & Hr Build
| 02***28 | Screw | 1 |
| 02***78 | Nut | 1 |
| 02***51 | Washer | 1 |
C2-12-1 Electrical Equipment, Tier 3 404d-22/22t
| 02***01 | Washer | 1 |
| 02***84 | Connector, Electrical | 1 |
| 70***34 | Sensor, Water Temperature | 1 |
C2-1-1 Electrical Equipment, Hp & Hr Build
| 02***01 | Washer | 1 |
| 70***21 | Switch, Vacuum Pressure | 1 |
| 70***33 | Switch, Engine Oil Pressure | 1 |
C2-5-2 Alternator Mountings
| 02***53 | Lever, Alternator Adjusting | 1 |
| 02***76 | Screw | 1 |
| 02***78 | Nut | 1 |
C2-4-1 Alternator, 65amp, Hp & Hr Build
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 13***8D | Nut, M5 Standard Flanged | 1 |
| 13***8D | Nut, M6 Standard Flanged | 1 |
C3-1-1 Wash/Wipe, Windscreen
| 13***3D | Screw, M5x16 | 4 |
| 13***1D | Nut, Plain M5 | 4 |
| 14***5D | Washer | 8 |
C3-10-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-6-1 Fuses, Relays And Buzzer
| 13***9D | Setscrew | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 33***24 | Relay | 1 |
C3-2-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 13***1D | Screw, Set M6x12 | 5 |
| 13***3D | Nut, M6 Lock | 8 |
C3-4-10 Air Conditioning, Components, Tier 3 Engine Only
| 33***63 | Condenser, Assembly | 1 |
| 33***65 | Panel, Heating Ventilation Air Conditioning, Assembly | 1 |
| 33***66 | Evaporator, Assembly | 1 |
C3-3-20 Instruments/Switches, Rh Console
| 24***09 | Plate, Mounting | 1 |
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***02 | Cap, Splash | 1 |
C3-3-1 Instruments/Switches, Front Console
| 33***36 | Knob, Throttle Control; Replaces 33***11, San 12731 | 1 |
| 70***00 | Light, Warning Led, Indicators/Trans. | 1 |
| 70***03 | Light, Warning Led, Srs/Self Level | 1 |
C3-4-1 Air Conditioning, Installation, Tier 3 Engine Only
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 20 |
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***2D | Setscrew, M16 X 50mm | 4 |
C3-3-10 Instruments/Switches, Lh Console
| 70***25 | Actuator, Beacon, Convoy Warning | 1 |
| 70***31 | Actuator, Aircon Switch, Soft Touch | 1 |
| 70***37 | Reversing Fan, Switch Decal | 1 |
D Controls-Machine, Engine
D1-4-1 Foot Controls, Manual
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***8D | Setscrew, M10 X 30 | 4 |
D1-1-1 Interlock Arm
| 13***2D | Nut | 1 |
| 13***3D | Nut, M12 | 1 |
| 13***5D | Capscrew, M6 X 20 | 1 |
D1-2-50 Joystick Lh, Hand,Multi-Function, Loader/Drive Control
| 24***63 | G.A., Auxiliary Hydraulic Multi Functi | 1 |
| 25***85 | Kit, Cardan | 1 |
| 25***86 | Plate, Retaining | 1 |
D1-2-2 Joystick Assembly, Servo Controller
| 33***63 | Gaiter | 1 |
| 33***37 | Lever, Joystick | 1 |
D1-3-20 Joystick Rh, Hand, Loader/Drive Control
| 24***64 | G.A., Controls Ga - Hand | 1 |
| 24***70 | G.A., Controls Ga Hand + A | 1 |
| 24***67 | G.A., Controls Ga Hand + A | 1 |
D1-2-10 Joystick Lh, Servo,Multi-Function, Drive Control
| 24***62 | G.A., Multi Function | 1 |
| 25***85 | Kit, Cardan | 1 |
| 25***86 | Plate, Retaining | 1 |
D1-2-1 Joystick Lh, Servo,Standard, Drive Control
| 24***65 | G.A., Controls | 1 |
| 24***68 | G.A., Controls | 1 |
| 24***69 | G.A., Controls | 1 |
D1-2-20 Joystick Lh, Hand/Foot,Standard, Drive Control
| 24***66 | G.A., Controls Ga Foot | 1 |
| 24***67 | G.A., Controls Ga Foot + A | 1 |
| 24***68 | G.A., Controls Ga Foot + A | 1 |
D1-2-30 Joystick Lh, Hand/Foot, Multi Function,Drive Control
| 24***64 | G.A., Auxiliary Hydraulic Multi Functi | 1 |
| 25***85 | Kit, Cardan | 1 |
| 25***86 | Plate, Retaining | 1 |
D1-2-40 Joystick Lh, Hand,Standard, Loader/Drive Control
| 24***64 | G.A., Controls Ga - Hand | 1 |
| 24***70 | G.A., Controls Ga Hand + A | 1 |
| 24***67 | G.A., Controls Ga Hand + A | 1 |
D1-3-10 Joystick Rh, Hand/Foot, Drive Control
| 24***66 | G.A., Controls Ga Foot | 1 |
| 24***67 | G.A., Controls Ga Foot + A | 1 |
| 24***68 | G.A., Controls Ga Foot + A | 1 |
D1-3-1 Joystick Rh, Servo,Loader Control
| 24***65 | G.A., Controls | 1 |
| 24***68 | G.A., Controls | 1 |
| 24***69 | G.A., Controls | 1 |
D2-11-1 Control, Hand Throttle, Tier 3
| 13***5D | Screw, M5x20 | 3 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 14***5D | Washer | 3 |
D2-1-1 Control, Hand Throttle, Tier 2
| 13***5D | Screw, M5x20 | 3 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***4Z | Bolt, M6 X 60 | 1 |
D2-2-1 Control, Throttle, Hand And Foot, Tier 2
| 13***5D | Screw, M5x20 | 3 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***4Z | Bolt, M6 X 60 | 1 |
D2-12-1 Control, Throttle, Hand And Foot, Tier 3
| 13***5D | Screw, M5x20 | 3 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
E Hydraulics & Air Including, Steering
E1-2-30 Circuit Joystick Rh, Servo Controls
| 13***3D | Nut, M6 Lock | 4 |
| 13***05 | Screw, Cap | 4 |
| 14***6D | Washer, M6 Plain | 4 |
E1-2-1 Circuit Joystick Lh, Servo Controls
| 13***3D | Nut, M6 Lock | 4 |
| 13***05 | Screw, Cap | 4 |
| 14***6D | Washer, M6 Plain | 4 |
E1-20-1 Hose And Pipework, Brake/Dump/Lockout, Valves
| 13***0D | Setscrew | 2 |
| 13***2D | Bolt | 2 |
| 13***3D | Nut, M6 Lock | 2 |
E1-1-5 Hose And Pipework, Hi-Flow Hydraulics
| 13***0Z | Bolt, M8x40 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-8-10 Hose And Pipework, Loader End, Self Level/Parallel Lift
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-2-20 Circuit Joystick Lh, Hand Only Controls
| 13***3D | Nut, M6 Lock | 4 |
| 13***05 | Screw, Cap | 4 |
| 14***6D | Washer, M6 Plain | 4 |
E1-20-5 Hose And Pipework, Combination Valve, Ehp,Brake Dump,Cut 0ff Manual Controls
| 13***0D | Bolt, M6x100mm | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 4 |
E1-2-10 Circuit Joystick Lh, Hand/Foot Controls
| 13***3D | Nut, M6 Lock | 4 |
| 13***05 | Screw, Cap | 4 |
| 14***6D | Washer, M6 Plain | 4 |
E1-3-1 Hose And Pipework, Loader Auxiliary
| 13***9D | Setscrew, M8x35 | 4 |
| 13***3D | Bolt, M6 X 25 | 2 |
| 13***3D | Bolt, M8 X 55mm | 1 |
E1-20-10 Hose And Pipework, Combination Valve, Ehp,Brake Dump,Cut 0ff Servo Controls
| 13***0D | Bolt, M6x100mm | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 4 |
E1-4-1 Hose And Pipework, Transmission Bleed, Servo Controls
| 24***22 | G.A., Transmission Bleed | 1 |
| 62***03 | Hose | 2 |
| 81***10 | Adapter, 'T' | 2 |
E1-1-1 Hose And Pipework, Standard Hydraulics
| 16***64 | Adapter | 2 |
| 24***52 | G.A. | 0 |
| 25***16 | Valve, Check | 1 |
E1-8-1 Hose And Pipework, Loader End, Standard Lift
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 22***16 | Clip, Jubilee | 2 |
| 23***07 | Seal, Strip, 50 Metre Roll | 2 |
E1-3-10 Hose And Pipework, Loader Auxiliary, Combi Valve Installation
| 13***9D | Setscrew, M8x35 | 4 |
| 13***0D | Bolt, M6x100mm | 2 |
| 13***3D | Bolt, M8 X 55mm | 1 |
E1-5-1 Hose And Pipework, Hydraulic Float
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***1D | Setscrew, M5 X 12mm Long | 1 |
| 13***8Z | Bolt | 2 |
E1-11-1 Hose And Pipework, Oil Cooler Hoses
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 4 |
| 24***50 | G.A., Cooling Pack | 1 |
| 24***52 | G.A. | 1 |
E1-2-50 Circuit Joystick Rh, Hand Only Controls
| 13***3D | Nut, M6 Lock | 4 |
| 13***05 | Screw, Cap | 4 |
| 14***6D | Washer, M6 Plain | 4 |
E1-2-40 Circuit Joystick Rh, Hand/Foot Controls
| 13***3D | Nut, M6 Lock | 4 |
| 13***05 | Screw, Cap | 4 |
| 14***6D | Washer, M6 Plain | 4 |
E1-4-10 Hose And Pipework, Transmission Bleed, Dual Controls (Bobcat/Case)
| 24***22 | G.A., Transmission Bleed | 1 |
| 62***03 | Hose | 2 |
| 81***10 | Adapter, 'T' | 2 |
E1-6-1 Hose And Pipework, Emergency Lower, Valve
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 24***05 | O Ring | 1 |
| 24***28 | Bracket | 1 |
E2-3-10 Pump Hydraulic, Gear Double
| 20***54 | Pump, Hydraulic, Tandem | 1 |
| 99***96 | Kit, Seal | 1 |
E2-6-10 Pump, Charge, Tier 3 Engine Specification
| 13***2D | Bolt, M10 X 50 | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
E2-5-1 Motor Components, Upper
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 1 |
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 1 |
| 20***68 | Motor, Assembly Upper, 159 0164 005 | 1 |
E2-6-1 Pump, Charge, Tier 2 Engine Specification
| 13***4D | Bolt | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 20***72 | Pump, Assembly, Gear | 1 |
E2-2-1 Pump Hydrostatic, Components
| 13***8D | Screw | 2 |
| 14***5D | Washer, 1/2in Small | 2 |
| 20***07 | Kit, Adjusting Screw | 1 |
E2-1-1 Pump Hydrostatic, Installation Std, Including Adaptors
| 13***8D | Screw | 4 |
| 13***0D | Setscrew, M16 X 40mm | 6 |
| 14***5D | Washer, 1/2in Small | 4 |
E2-7-1 Motor, Drive, Tracked Machines
| 20***16 | Spring | 9 |
| 20***33 | Plate, Outer,Brake Mcr3 | 15 |
| 20***35 | Shim | 1 |
E2-1-10 Pump Hydrostatic, Installation Hi-Flow, Including Adaptors
| 13***8D | Screw | 4 |
| 13***0D | Setscrew, M16 X 40mm | 6 |
| 14***5D | Washer, 1/2in Small | 4 |
E2-4-1 Motor Components, Lower
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 2 |
| 20***69 | Motor, Assembly Lower, 160 0103 005 | 1 |
| 20***62 | Kit, Seal | 1 |
E2-3-1 Pump Hydraulic, Gear Single
| 20***04 | Pump, Hydraulic, Single | 1 |
| 99***95 | Kit, Seal | 1 |
E3-1-10 Valve 3 Spool Manual, Hand-Foot Controls, Incl.Adaptors And Mounting
| 13***7D | Bolt, M10 X 75mm | 3 |
| 13***1D | Nut, M10 | 3 |
| 14***8D | Washer, M10 | 3 |
E3-3-1 Valve 3 Spool Servo, Components
| 25***24 | Poppet, Check Valve; Was Supplier Ref 53698, Change Requested By T, Ony Senior 28/08/03 To Dar | 3 |
| 25***26 | Plug | 3 |
| 25***29 | Seat, Spring | 6 |
E3-3-30 Valve, Aux Relief, Anti-Cavitation, Hammer Circuit Only
| 25***85 | Valve, Auxiliary Relief, With Anti-Cavitation; Refer To Robot Catalogues For Location. Only Fitted With Husco Valve Blocks On Robot Machines, Valve, Auxiliary Relief, With Anti-Cavitation; Hammer Circuit Only With Husco Valve Block. Fitted To Valve Block Port 2a Bucket Ram Head Side, Valve, Auxiliary Relief, With Anti-Cavitation | 1 |
| 25***15 | Kit, Seal, With Spring | 1 |
E3-6-1 Valve, Self Level, Components
| 25***01 | Pin | 1 |
| 25***02 | Cap, Adjustment | 1 |
| 25***03 | Screw | 1 |
E3-2-1 Valve,Solenoid, Servo Lockout
| 24***41 | G.A., Lockout Valve Ga, Servo Machine | 1 |
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
E3-18-1 Filter, Hydraulic, Charge Circuit
| 13***5D | Setscrew, M10 X 20 | 3 |
| 14***01 | Washer, Aluminium | 1 |
| 14***08 | Seal, Washer | 1 |
E3-3-20 Valve 3 Spool Manual, Components + Float, Hand-Foot Controls
| 25***16 | Spring, Gold | 1 |
| 25***17 | Sleeve | 1 |
| 25***18 | Disc | 1 |
E3-12-1 Valve, Ehp
| 16***50 | Adaptor | 4 |
| 24***03 | O Ring | 1 |
| 25***74 | Solenoid, Cartridge Valve Assembly | 2 |
E3-10-1 Filter, Hydraulic, Main Return
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 14***8D | Washer, Spring, M10 | 2 |
E3-8-1 Valve, Solenoid, Brake
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 25***50 | Coil, 12v, Deutsch Connector | 1 |
E3-1-1 Valve 3 Spool, Servo Controls, Incl.Adaptors And Mounting
| 13***7D | Bolt, M10 X 75mm | 3 |
| 13***1D | Nut, M10 | 3 |
| 14***8D | Washer, M10 | 3 |
E3-11-1 Valve, High Flow
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***0D | Bolt, M8x100 | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
E3-12-10 Valve, Combination, Ehp,Brake Dump And Cut 0ff
| 25***33 | Kit, Seal | 2 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 2 |
| 25***21 | Kit-Seal | 1 |
E3-3-10 Valve 3 Spool Manual, Components,Standard, Hand-Foot Controls
| 25***20 | Spring, Gold | 2 |
| 25***23 | Screw | 2 |
| 25***24 | Poppet, Check Valve; Was Supplier Ref 53698, Change Requested By T, Ony Senior 28/08/03 To Dar | 3 |
E3-4-1 Lubricants & Filters
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***35 | Element, Engine Oil Filter | 1 |
| 32***02 | Kit-Element, Fuel Filter, Short | 1 |
E4-1-1 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***26 | Spacer, 48.5 X 46 X 27l | 1 |
| 57***56 | Ram, Assembly, Lift | 1 |
E4-2-1 Ram, Shovel, Loader
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***31 | Ram, Assembly, Bucket | 1 |
| 55***91 | Cylinder | 1 |
F Axles, Wheels & Transmission
F1-2-1 Hub & Components, Front Left Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***0D | Setscrew, M16x40 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F1-1-1 Hub & Components, Front Right Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***6D | Bolt, M12x70 | 2 |
| 13***0D | Setscrew, M16x40 | 7 |
F2-2-1 Hub & Components, Rear Left Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***0D | Setscrew, M16x40 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F2-1-1 Hub & Components, Rear Right Hand
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***6D | Bolt, M12x70 | 2 |
F3-2-10 Wheels & Tyres, Solid, 7.50 X 16, Omega/Watts, 1408 Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***66 | Wheel, Assembly, Solid, 7.5 X 16 | 4 |
| 41***00 | Wheel, Centre, Split | 1 |
F3-3-20 Wheels & Tyres, 10 X 16.5, Xzsl, Michelin, 1600mm Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***09 | Wheel, Assembly Std, 10x16.5 1600 Wide | 4 |
F3-3-10 Wheels & Tyres, 10 X 16.5, Xzsl, Michelin, 1524mm Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***08 | Wheel, Assembly Std., 10x16.5-1524 Wide | 4 |
F3-4-10 Wheels & Tyres, 10 X 16.5, Lifemaster, 1574mm Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***78 | Wheel, Assembly, Lifemaster, 10x16.5 10 Ply | 4 |
F3-2-1 Wheels & Tyres, Solid, 6.50 X 16, Omega/Watts, 1364 Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***65 | Wheel, Assembly, Solid, 6.5 X 16 | 4 |
| 41***00 | Wheel, Centre, Split | 1 |
F3-5-10 Wheels & Tyres, 700 X 15 - 14pr, Solideal, 1372mm Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***62 | Wheel, Assembly, 7.00 X 15, 14 Ply H.D.; 1372mm. 1372mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre, Wheel, Assembly, 7.00 X 15, 14 Ply H.D. | 4 |
| 41***00 | Wheel, Centre, Split | 1 |
F3-3-1 Wheels & Tyres, 7.00 R15, Xzm, Michelin, 1372mm Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***64 | Wheel, Assembly, 7 X 15, Xzm Michelin, Wheel, Assembly, 7 X 15, Xzm Michelin; 1372mm. 1372mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-1-10 Wheel & Tyres, Segmented, 10-16.5, Air Boss 20 Segments Per Wheel
| 24***51 | Wheel, Assembly, Segmented, L.H. | 2 |
| 24***52 | Wheel, Assembly, Segmented, R.H. | 2 |
| 41***00 | Wheel, Centre, 10/16.5, L.H. | 1 |
F3-7-1 Wheels & Tyres, 31.5/13 X 16.5, Sks Hauler, 1604mm Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***76 | Wheel, Assembly, Sks Hauler, 31.5/13 X 16.5 | 1 |
F3-6-1 Wheels & Tyres, 10 X 16.5 - 6 & 8pr, Solideal, 1524mm Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***45 | Wheel, Assembly, 10 X 16.5, 6 Ply, Wheel, Assembly, 10 X 16.5, 6 Ply; 1524mm Wide. 1524mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-2-20 Wheels & Tyres, Solid, 700 X 15-5.50, Omega/Watts, 1383 Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***63 | Wheel, Assembly, Solid, 700 X 15-5.50 | 4 |
| 41***00 | Wheel, Centre, Split | 1 |
F3-6-10 Wheels & Tyres, 10 X 16.5 - 6 & 8pr, Solideal, 1600mm Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 15***01 | Valve | 1 |
| 24***02 | Nut, Wheel | 8 |
F3-5-1 Wheels & Tyres, 700 X 15 - 6pr, Solideal, 1372mm Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***61 | Wheel, Assembly, 7.00 X 15, 6 Ply, 1370mm, Wheel, Assembly, 7.00 X 15, 6 Ply, 1370mm; 1372mm. 1372mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
| 41***00 | Wheel, Centre | 1 |
F3-1-1 Wheel & Tyres, Segmented, 7.50-15, Air Boss 18 Segments Per Wheel
| 24***49 | Wheel, Assembly, Segmented, L.H. | 2 |
| 24***50 | Wheel, Assembly, Segmented, R.H. | 2 |
| 41***00 | Wheel, Centre, 7 X 15, L.H. | 1 |
F3-4-1 Wheels & Tyres, 10 X 16.5, Lifemaster, 1498mm Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***77 | Wheel, Assembly, 10 X 16.5, 10 Ply, Lifemaster | 4 |
F5-1-1 Drive Assembly
| 13***2D | Setscrew, M16 X 40 | 8 |
| 13***1D | Nut | 1 |
| 24***44 | O Ring | 1 |
G Brakes
G1-1-1 Brake Components
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***1Z | Bolt | 6 |
| 13***2D | Nut | 1 |
J Track & Running Gear, Undercarriage
J1-4-10 Idler Wheel, Rear, Berco
| 33***40 | Seal, Assembly | 2 |
| 33***41 | Bush | 2 |
| 33***45 | Circlip | 2 |
J1-3-10 Idler Wheel, Front, Berco
| 33***30 | Bolt | 4 |
| 33***38 | Washer | 4 |
| 33***39 | Bracket, Idler Wheel | 2 |
J1-1-1 Track Frame Assembly, Motors And Adaptors
| 13***9D | Setscrew, M8x35 | 4 |
| 13***7D | Setscrew, M12 X 25 | 4 |
| 13***0D | Setscrew, M16x40 | 4 |
J1-5-1 Roller, Track Bottom
| 33***59 | Roller | 8 |
| 33***97 | Seal, Assembly | 2 |
| 33***68 | Plug | 1 |
J1-3-1 Idler Wheel, Front, Ital Tractor
| 13***2D | Setscrew | 4 |
| 14***9D | Washer, M12 Spring | 4 |
| 33***61 | Wheel, Front Idler Assembly, Ital Tractor; Superseded By 33***61 See San 25823 | 2 |
J1-4-1 Idler Wheel, Rear, Ital Tractor
| 33***63 | Wheel, Rear Idler Assembly, Ital Tractor; Superseded By 33***63 See San 25823 | 1 |
| 33***97 | Seal, Assembly | 2 |
| 33***98 | Bush, Idler Wheel; Superseded By 33***61 See San 21906 | 2 |
J1-2-1 Track Assembly, 320 Wide, Rubber
| 33***10 | Track, 320 Wide,Rubber, 50 Links | 2 |
M Engine 404c-22/404c-22t,Tier 2, Up To M1603452
M1-6-3 Timing Case, Camshaft & Gears, Hr Build
| 02***68 | Key | 1 |
| 02***78 | Nut | 3 |
| 02***79 | O Ring | 1 |
M1-3-2 Block Assembly, Hr Build
| 02***07 | Plug, 8.4mm | 5 |
| 02***13 | Bearing | 1 |
| 02***17 | Dowel | 2 |
M1-6-1 Timing Case, Camshaft & Gears, Hr Build
| 02***68 | Key | 1 |
| 02***78 | Nut | 4 |
| 02***79 | O Ring | 1 |
M1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Hr Build
| 02***42 | Key | 1 |
| 02***16 | Gear | 1 |
| 02***23 | Washer, Thrust | 2 |
M1-7-2 Flywheel & Housing, Hr Build
| 02***08 | Washer | 1 |
| 02***34 | Washer, Spring | 2 |
| 02***75 | Bolt | 6 |
M1-6-2 Timing Levers, Arms & Springs, Hp Build
| 02***96 | Nut | 1 |
| 02***07 | Circlip | 1 |
| 02***11 | Pin | 1 |
M1-8-2 Engine Mountings, Hr Build
| 12***02 | Plate, Compression | 4 |
| 13***2D | Bolt | 4 |
| 13***3D | Nut, M16 | 4 |
M1-1-1 Engine Assembly, Naturally Aspirated, Hp Build
| 01***81 | Engine, Complete 404c22, Nat/Asp 2800rpm | 1 |
| 24***09 | G.A., Engine 2800 Rpm | 1 |
M1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***2Z | Bolt, M16 X 120 | 4 |
| 13***3Z | Nut, M16 | 4 |
M1-5-2 Fans,Pulleys, & Fan Belt, Hr Build
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
M1-1-2 Engine Assembly, Turbocharged, Hr Build
| 01***82 | Engine, Complete 404c-22t, Turbo 65 Amp | 1 |
| 24***41 | G.A., Engine & Fittings | 1 |
M1-7-1 Flywheel & Housing, Hp Build
| 02***18 | Dowel | 1 |
| 02***08 | Washer | 1 |
| 02***34 | Washer, Spring | 2 |
M1-6-4 Timing Levers, Arms & Springs, Hr Build
| 02***96 | Nut | 1 |
| 02***07 | Circlip | 1 |
| 02***11 | Pin | 1 |
M1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Hp Build
| 02***42 | Key | 1 |
| 02***16 | Gear | 1 |
| 02***23 | Washer, Thrust | 2 |
M1-5-1 Fans,Pulleys, & Fan Belt, Hp Build
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
M1-3-1 Block Assembly, Hp Build
| 02***06 | Plug, 6.5mm | 3 |
| 02***07 | Plug, 8.4mm | 3 |
| 02***13 | Bearing | 1 |
M2-3-2 Rocker Cover, Hr Build
| 02***73 | Breather, Gauze | 1 |
| 02***78 | Seal | 1 |
| 02***55 | Cap, Engine Oil Filler | 1 |
M2-4-1 Lifting Plates, Engine, Hp Build
| 02***12 | Screw | 3 |
| 02***52 | Plate, Engine Lifting | 2 |
M2-1-2 Cylinder Head, Hr Build
| 02***02 | Plug, D=25 | 5 |
| 02***22 | Stud | 1 |
| 02***42 | Seal, Inlet Valve | 4 |
M2-4-2 Lifting Plates, Engine, Hr Build
| 02***24 | Washer | 2 |
| 02***43 | Plate, Engine Lifting | 2 |
| 82***25 | Screw | 2 |
M2-2-1 Rocker Assembly, Push Rods & Tappets, Hp Build
| 02***67 | Screw, Adjusting | 8 |
| 02***68 | Nut | 8 |
| 02***71 | Tappet | 8 |
M2-3-1 Rocker Cover, Hp Build
| 02***73 | Breather, Gauze | 1 |
| 02***78 | Seal | 1 |
| 02***55 | Cap, Engine Oil Filler | 1 |
M2-2-2 Rocker Assembly, Push Rods & Tappets, Hr Build
| 02***67 | Screw, Adjusting | 8 |
| 02***68 | Nut | 8 |
| 02***71 | Tappet | 8 |
M2-1-1 Cylinder Head, Hp Build
| 02***02 | Plug, D=25 | 6 |
| 02***42 | Seal, Inlet Valve | 4 |
| 02***43 | Spring, Valve | 8 |
M3-3-2 Filter Pre-Cleaner, Hp, Optional
| 24***55 | Pre-Cleaner G.A, Turbo Ii | 1 |
| 58***10 | Filter, Pre-Cleaner | 1 |
M3-3-3 Filter, Air, Hr Build
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
M3-4-2 Exhaust System, Spark Arrester
| 12***45 | Spacer | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***7D | Capscrew | 5 |
M3-3-1 Filter, Air, Hp Build
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
M3-4-4 Exhaust System
| 12***45 | Spacer | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***7D | Capscrew | 5 |
M3-3-4 Filter Pre-Cleaner, Hr, Optional
| 22***11 | Clip, Jubilee | 1 |
| 33***45 | Adapter, Filter Pre-Cleaner | 1 |
| 33***36 | Filter, Pre-Cleaner, Assembly | 1 |
M3-1-2 Manifold, Induction, Hr Build
| 02***76 | Screw | 2 |
| 02***48 | Pipe, Air Induction | 1 |
| 02***49 | Gasket | 1 |
M3-2-2 Manifold, Exhaust, Hr Build
| 02***78 | Nut | 4 |
| 02***82 | Gasket, Exhaust Manifold | 1 |
| 02***84 | Screw | 4 |
M3-4-1 Exhaust System
| 02***38 | Gasket | 1 |
| 13***7D | Setscrew, M8x25 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
M3-2-1 Manifold, Exhaust, Hp Build
| 02***78 | Nut | 2 |
| 02***81 | Manifold, Exhaust | 1 |
| 02***82 | Gasket, Exhaust Manifold | 1 |
M3-4-3 Exhaust System
| 02***38 | Gasket | 1 |
| 13***7D | Setscrew, M8x25 | 6 |
| 14***7D | Washer, M8 Plain | 2 |
M3-1-1 Manifold, Induction, Hp Build
| 02***76 | Screw | 2 |
| 02***48 | Pipe, Air Induction | 1 |
| 02***49 | Gasket | 1 |
M4-5-1 Radiator & Hoses, Hp & Hr Build
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
| 13***1D | Nut, Plain | 1 |
M4-2-2 Thermostat, Housing, Inlet & Outlet, Hr Build
| 02***96 | Nut | 2 |
| 02***43 | Gasket | 1 |
| 02***44 | Connector, Water Outlet | 1 |
M4-6-1 Fan Ring Assembly, Hp & Hr Build
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Nut, M6 Lock | 3 |
M4-2-1 Thermostat, Housing, Inlet & Outlet, Hp Build
| 02***96 | Nut | 2 |
| 02***89 | Plug, D=30mm | 1 |
| 02***43 | Gasket | 1 |
M4-2-4 Thermostat, Housing, Inlet & Outlet, Hr Build
| 02***96 | Nut | 2 |
| 02***89 | Plug, D=30mm | 3 |
| 02***43 | Gasket | 1 |
M4-7-1 Fan Guard
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***2D | Washer, Plain | 2 |
M4-1-30 Pump,Water, Repair Kit, Ti 3/055 Refers
| 02***43 | Gasket | 1 |
| 02***55 | Kit-Gasket | 1 |
| 02***78 | Housing, Thermostat | 1 |
M4-1-1 Pump, Water, Hp & Hr Build
| 02***96 | Nut | 1 |
| 02***80 | Pump, Water Assembly | 1 |
| 02***36 | Gasket | 1 |
M4-3-1 Cooler Combination, Assembly, Hp & Hr Build
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 4 |
| 24***50 | G.A., Cooling Pack | 1 |
| 24***96 | G.A., Temp, Robot Machine | 1 |
M4-4-1 Cooler Fittings, & Mountings, Hp & Hr Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1D | Screw, Set M6x12 | 4 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
M5-5-1 Cooler, Oil, Filter & Pipework, Hr Build
| 02***16 | Clip, 'P' | 1 |
| 02***95 | Cooler, Engine Oil | 1 |
| 02***35 | Element, Engine Oil Filter | 1 |
M5-2-1 Pump, Oil, & Relief Valve, Hp & Hr Build
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 3 |
| 02***12 | Bush | 3 |
M5-1-1 Sump, Oil, Hp Build
| 02***02 | Screw | 2 |
| 02***72 | Bolt | 1 |
| 02***97 | Screw | 30 |
M5-4-1 Filter, Oil, Hp Build
| 02***75 | Washer | 2 |
| 02***26 | Connector | 1 |
| 02***28 | Bolt, Banjo | 1 |
M5-4-2 Oil Leak Off Pipe, 403d-22/22t
| 02***28 | Bolt, Banjo | 1 |
| 02***59 | Washer | 4 |
| 02***41 | Bolt, Banjo | 1 |
M5-1-2 Sump, Oil, Hr Build
| 02***02 | Screw | 2 |
| 02***72 | Bolt | 1 |
| 02***97 | Screw | 30 |
M6-1-2 Pump, Fuel Injection, & Shut-Off Solenoid, Hr Build
| 02***78 | Nut | 3 |
| 02***01 | Washer | 2 |
| 02***08 | Washer | 2 |
M6-1-1 Pump, Fuel Injection, & Shut-Off Solenoid, Hp Build
| 02***78 | Nut | 3 |
| 02***65 | Screw | 1 |
| 02***01 | Washer | 2 |
M6-2-2 Injectors, Fuel, & Injection Pipes, Hr Build
| 02***96 | Nut | 3 |
| 02***14 | Damper | 6 |
| 02***04 | Washer, Copper | 1 |
M6-2-1 Injectors, Fuel, & Injection Pipes, Hp Build
| 02***96 | Nut | 3 |
| 02***14 | Damper | 6 |
| 02***04 | Washer, Copper | 4 |
M6-3-3 Fuel System, Electric Fuel Pump, Hr Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5D | Setscrew, M8x20 | 1 |
M6-4-1 Filter, Fuel, Hp & Hr Build
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
M6-5-1 Pump, Fuel Lift, Hp & Hr Build
| 02***69 | O Ring | 1 |
| 02***92 | Screw, M6x16 | 2 |
| 17***00 | Pump, Fuel Lift | 1 |
M6-3-1 Fuel System, Hp Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Setscrew, M8x20 | 3 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
M6-3-2 Fuel System, Hr Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***7D | Setscrew, M8x25 | 2 |
M7-3-1 Compressor, & Installation, Air Conditioning Option Hp&Hr Build
| 13***7D | Setscrew, M8x25 | 1 |
| 13***9D | Setscrew, M8x35 | 1 |
| 13***2D | Setscrew, M8 X 50 | 1 |
M7-7-1 Heater, Engine Block
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***1D | Nut, Plain | 4 |
M7-7-2 Heater, Engine Block
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***1Z | Nut | 2 |
M7-2-2 Turbocharger, Pipework & Mounting, Hr Build
| 02***09 | Gasket | 2 |
| 02***12 | Washer, Seal | 2 |
| 02***22 | Screw | 4 |
M7-4-1 Compressor, Air Conditioning
| 24***19 | G.A., Air Conditioning | 1 |
| 71***93 | Compressor, Air Conditioning, 12v | 1 |
M7-1-2 Turbocharger, Hr Build
| 02***78 | Nut | 4 |
| 02***38 | Gasket | 1 |
| 02***44 | Washer | 4 |
M8-1-1 Gasket Sets, Hp Build
| 02***14 | Kit-Gasket, (0.5mm) | 1 |
| 02***15 | Kit-Gasket, (0.4mm); Refer To Service Workshop Manual. To Ensure The Correct Gasket Set Is Used, Check Cylinder Head Gasket 0.4mm Or 0.5mm., Kit-Gasket, (0.4mm), Kit-Gasket, (0.4mm); Refer To Service Workshop Manual. To Ensure The Correct Gasket Set Is Used, Check, Cylinder Head Gasket, 0.4mm Or 0.5mm., Kit-Gasket, (0.4mm); Refer To Service Workshop Manual. To Ensure The Correct Gasket Set Is Used, Check The Cylinder Head Gasket, 0.4mm Or 0.5mm ? | 1 |
M8-1-2 Gasket Sets, Hr Build
N Engine 404d-22/404d-22t,Tier 3, From M1603453 Onward
N1-7-1 Flywheel & Housing
| 02***18 | Dowel | 1 |
| 02***75 | Bolt | 6 |
| 02***48 | Flywheel | 1 |
N1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***2D | Bolt | 4 |
| 13***3D | Nut, M16 | 4 |
N1-5-3 Fan, Pulleys & Belt
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
N1-4-3 Crankshaft, Bearings, Pistons & Con-Rods
| 02***42 | Key | 1 |
| 02***23 | Washer, Thrust | 2 |
| 02***25 | Bush, Small End | 1 |
N1-1-3 Engine Assembly, 404d-22t Turbo, Tier 3
| 33***47 | Engine, Assembly, 404d-22t, Turbocharged, 60bhp | 1 |
| 33***69 | G.A, Engine T/C (180t), T3 | 1 |
N1-6-4 Timing Levers, Arms & Springs
| 02***71 | Screw | 4 |
| 02***78 | Nut | 1 |
| 02***11 | Pin | 1 |
N1-6-3 Timing Case,Camshaft, & Gears
| 02***68 | Key | 1 |
| 02***89 | Pin | 1 |
| 02***96 | Nut | 1 |
N1-6-2 Timing Levers, Arms & Springs
| 02***71 | Screw | 4 |
| 02***78 | Nut | 1 |
| 02***11 | Pin | 1 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***42 | Key | 1 |
| 02***23 | Washer, Thrust | 2 |
| 02***25 | Bush, Small End | 1 |
N1-3-1 Block Assembly
| 02***07 | Plug, 8.4mm | 3 |
| 02***13 | Bearing | 1 |
| 02***14 | Plug, Core, D=45mm | 1 |
N1-1-2 Engine Assembly, 404d-22t Turbo, Tier 3
| 33***30 | Engine, Assembly 404d-22t, Turbocharged, 60bhp | 1 |
| 33***34 | G.A, Engine T/C (180), T3 | 1 |
N1-1-1 Engine Assembly, 404d-22 Nat/Asp, Tier-3
| 33***93 | Engine, Complete 404d-22, Nat/Aspirated | 1 |
| 33***73 | G.A, Engine N/Asp T3 | 1 |
N1-5-1 Fan, Pulleys & Belt
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
N1-6-1 Timing Case,Camshaft, & Gears
| 02***68 | Key | 1 |
| 02***89 | Pin | 1 |
| 02***96 | Nut | 1 |
N2-4-1 Lifting Plates
| 02***24 | Washer | 2 |
| 02***43 | Plate, Engine Lifting | 2 |
| 82***25 | Screw | 2 |
N2-1-1 Cylinder Head
| 02***42 | Seal, Inlet Valve | 4 |
| 02***43 | Spring, Valve | 8 |
| 02***44 | Cap | 8 |
N2-1-2 Cylinder Head
| 02***42 | Seal, Inlet Valve | 4 |
| 02***43 | Spring, Valve | 8 |
| 02***44 | Cap | 8 |
N2-3-1 Rocker Cover
| 02***73 | Breather, Gauze | 1 |
| 02***78 | Seal | 1 |
| 02***55 | Cap, Engine Oil Filler | 1 |
N2-3-3 Rocker Cover
| 02***73 | Breather, Gauze | 1 |
| 02***78 | Seal | 1 |
| 02***92 | Plug, D=10mm | 1 |
N2-3-5 Breather, Rocker Cover
| 02***66 | Washer | 3 |
| 02***19 | Bolt | 1 |
| 02***04 | Clip, Jubilee | 2 |
N2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***67 | Screw, Adjusting | 8 |
| 02***68 | Nut | 8 |
| 02***71 | Tappet | 8 |
N2-4-3 Lifting Plates
| 02***13 | Screw | 2 |
| 02***24 | Washer | 2 |
| 02***43 | Plate, Engine Lifting | 2 |
N2-3-4 Induction Manifold
| 02***76 | Screw | 2 |
| 02***49 | Gasket | 1 |
| 02***95 | Hose, Air Induction | 1 |
N3-3-1 Filter, Air
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
N3-3-4 Filter, Pre-Cleaner, Optional
| 22***11 | Clip, Jubilee | 1 |
| 33***45 | Adapter, Filter Pre-Cleaner | 1 |
| 33***36 | Filter, Pre-Cleaner, Assembly | 1 |
N3-2-3 Manifold Exhaust
| 02***78 | Nut | 4 |
| 02***82 | Gasket, Exhaust Manifold | 1 |
| 02***84 | Screw | 4 |
N3-4-1 Exhaust System
| 02***38 | Gasket | 1 |
| 13***7D | Setscrew, M8x25 | 6 |
| 14***7D | Washer, M8 Plain | 2 |
N3-2-1 Manifold, Exhaust
| 02***78 | Nut | 4 |
| 02***38 | Gasket | 1 |
| 02***57 | Flange, Exhaust | 1 |
N3-4-2 Exhaust System
| 12***45 | Spacer | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***7D | Capscrew | 5 |
N3-3-2 Filter, Pre-Cleaner, Optional
| 24***55 | Pre-Cleaner G.A, Turbo Ii | 1 |
| 58***10 | Filter, Pre-Cleaner | 1 |
N3-3-3 Filter, Air
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
N4-6-1 Fan Ring Assembly
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Nut, M6 Lock | 3 |
N4-3-1 Radiator Assembly
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 4 |
| 24***50 | G.A., Cooling Pack | 1 |
| 30***36 | Cap, Radiator Pressure, 100kpa | 1 |
N4-4-1 Radiator, Fittings & Mountings
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1D | Screw, Set M6x12 | 4 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
N4-1-1 Pump, Water
| 02***96 | Nut | 1 |
| 02***79 | Hose, By-Pass | 1 |
| 02***80 | Pump, Water Assembly | 1 |
N4-1-3 Pump, Water
| 02***96 | Nut | 1 |
| 02***79 | Hose, By-Pass | 1 |
| 02***11 | Adapter | 1 |
N4-7-1 Fan Guard
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***2D | Washer, Plain | 2 |
N4-2-1 Thermostat Housing
| 02***96 | Nut | 2 |
| 02***89 | Plug, D=30mm | 1 |
| 02***43 | Gasket | 1 |
N4-5-1 Radiator Hoses
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
| 13***1D | Nut, Plain | 1 |
N5-1-1 Sump, Oil
| 02***02 | Screw | 2 |
| 02***97 | Screw | 31 |
| 02***02 | O Ring | 1 |
N5-4-2 Oil Leak Off Pipe
| 02***28 | Bolt, Banjo | 1 |
| 02***59 | Washer | 2 |
| 02***41 | Bolt, Banjo | 1 |
N5-2-1 Pump, Oil
| 02***08 | Dowel | 3 |
| 02***12 | Bush | 3 |
| 02***15 | Shim, Oversize - 0.10mm | 1 |
N5-5-3 Oil Cooler, & Oil Filter
| 02***49 | Seal | 1 |
| 02***16 | Clip, 'P' | 1 |
| 02***95 | Cooler, Engine Oil | 1 |
N5-2-3 Pump, Oil
| 02***08 | Dowel | 3 |
| 02***12 | Bush | 3 |
| 02***15 | Shim, Oversize - 0.10mm | 1 |
N5-4-1 Filter, Oil & Prv
| 02***26 | Connector | 1 |
| 02***28 | Bolt, Banjo | 1 |
| 02***59 | Washer | 4 |
N6-2-1 Injectors, Fuel &, Injection Pipes
| 02***96 | Nut | 3 |
| 02***14 | Damper | 6 |
| 02***04 | Washer, Copper | 4 |
N6-2-3 Injectors, Fuel &, Injection Pipes
| 02***96 | Nut | 3 |
| 02***14 | Damper | 6 |
| 02***04 | Washer, Copper | 4 |
N6-4-1 Fuel Filter
| 20***04 | Bowl, Glass | 2 |
| 20***06 | Seal | 2 |
| 20***07 | Bolt, Centre | 1 |
N6-1-1 Pump, Fuel Injection
| 02***78 | Nut | 3 |
| 02***01 | Washer | 1 |
| 02***44 | Washer | 1 |
N6-1-2 Pump, Fuel Injection
| 02***78 | Nut | 3 |
| 02***01 | Washer | 1 |
| 02***44 | Washer | 1 |
N6-3-1 Fuel System
| 02***78 | Nut | 1 |
| 02***24 | Washer | 1 |
| 02***54 | Bracket, Fuel Pre-Filter | 1 |
N7-2-3 Pipework, Turbocharger
| 02***09 | Gasket | 2 |
| 02***12 | Washer, Seal | 2 |
| 02***41 | Screw | 6 |
N7-3-1 Compressor, & Installation, Air Conditioning Option
| 13***7D | Setscrew, M8x25 | 3 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***4D | Screw | 1 |
N7-1-3 Turbocharger
| 02***78 | Nut | 4 |
| 02***20 | Turbocharger | 1 |
| 02***28 | Stud | 4 |
N7-7-1 Heater, Engine Block
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***1D | Nut, Plain | 2 |
N7-7-2 Heater, Engine Block
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***1Z | Nut | 2 |
ROBOT 180T(TRACKED) serial number reference
Locate the machine identification plate to verify the serial number. Confirm applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 1803000 to 1806999 | Robot 180T (tracked) and Robot 180T HF (high-flow tracked) applicability per service manual publication the OEM part reference-1. | |
| 1162000 Onwards | Robot 180T and Robot 180T HF applicability per service manual publication the OEM part reference and operator's manual. | |
| 01803000 to 01803999 | Robot 180T (tracked) applicability per parts manual catalog the OEM part reference for 2006 model year. |
Frequently asked questions
What engine does the JCB Robot 180T use?
The JCB Robot 180T is powered by a 60 hp (44.74 kW) turbocharged 404C-22T diesel engine.
What is the operating weight of the JCB Robot 180T?
The operating weight is approximately 3,630 kg (8,002.8 lb), varying slightly by configuration and attachment package.
What model replaced the JCB Robot 180T?
The JCB Robot 180T was succeeded by the JCB 260T and 270T compact track loaders as the manufacturer shifted to larger capacity models in the tracked line.
What ROBOT 180T(TRACKED) owners discuss
What engine powers the JCB Robot 180T and what are the key serial number breaks affecting maintenance procedures?
The JCB Robot 180T is powered by a 60-hp (44.74 kW) turbocharged JCB 404C-22T diesel engine. The machine operating weight is 3,630 kg (8,002.8 lb). Maintenance procedures for the engine oil and cooling system change at machine serial number the OEM part reference. For machines up to serial no. the OEM part reference, the service manual specifies checking the oil level and changing the oil and filter. For machines from serial no. the OEM part reference onwards, the procedure includes renewing the engine breather in addition to the oil and filter changes. The Robot 180T HF variant covers serial numbers the OEM part reference to the OEM part reference.
How does the hydraulic system configuration differ between standard and high-flow models, and what is the role of the Power Management System (P.M.S.)?
The standard flow hydraulic system provides 15 gpm at 3,000 psi, resulting in 31 hydraulic hp. The high-flow (HF) configuration delivers 32 gpm at 3,000 psi, increasing hydraulic power to 56.9 hp. The Robot 180T with servo transmission controls is equipped with a Power Management System (P.M.S.). The P.M.S. manages the loader circuit and high-flow circuit to optimize hydraulic power distribution between the drive and attachment functions, preventing engine stall during high-demand operations.
What are the known undercarriage and drive chain behaviors for the tracked Robot 180T?
The Robot 180T uses a hydrostatic drive with drive motors and a drive chain system. Community consensus indicates that drive chain tension is critical; loose chains can hammer the motors and other drive components, leading to premature failure. Operators are advised to regularly check and adjust the drive chain tension. The undercarriage is proprietary to the JCB Robot design, and track damage or repair procedures are detailed in the service manual's Tracks section, which covers track removal, idler wheels, rollers, and the track frame assembly.
What electrical or sensor issues are common in the Robot 180T, particularly after water exposure?
The Robot 180T electrical system includes a mainframe harness, panel harness, and specific circuits for the parking brake and safety restraint. A known issue involves loss of drive function after operating in wet conditions (16-24 inches of water). This is often traced to a 5-amp fuse or a high-flow relay. Operators should inspect these fuses and relays if the machine loses forward and reverse movement while the boom functions normally. The safety restraint system is also a key sensor component; if the seat weight sensor detects no operator or the seat bar is raised, it locks movement for safety.
What are the visibility and stability characteristics of the Robot 180T compared to traditional skid steers?
The Robot 180T features a single boom design with a side-entry door, which provides excellent all-around visibility when the loader arm is down. However, visibility is non-existent when the loader arm is raised. The side-entry design and single boom offer superior stability and safety for one-person operations, particularly in tight spaces or when handling logs, as it eliminates the risk of being pinned between the machine and an object. The machine is noted for its tight 1.57 m (5.15 ft) turning radius, enhancing maneuverability in confined jobsites.
What are the typical wear patterns and maintenance intervals for the Robot 180T?
Routine maintenance includes greasing quickhitch pivot pins every 10 hours and loader arm pivot points and lift ram pivots every 50 hours. Oiling of the safety restraint mechanism and throttle pedal (if fitted) is required every 500 hours. The hydraulic tank breather should be changed regularly to prevent contamination. The service manual highlights the importance of checking the ROPS/FOPS structure for damage. Track gearboxes and slew gearboxes (if applicable to variants) require specific fluid checks, though the Robot 180T is a skid steer loader and does not have a slew gearbox.
What should be checked when buying a used JCB Robot 180T?
When purchasing a used Robot 180T, verify the serial number to determine the correct service procedures (pre- or post-the OEM part reference). Check the drive chain tension and condition, as loose chains cause significant damage to motors. Inspect the 5-amp fuse and high-flow relay for signs of water damage or corrosion. Test the safety restraint system to ensure it properly locks out movement when the operator is not seated. Verify the condition of the side-entry door mechanism and the loader arm hydraulic rams for leaks. Finally, confirm the engine oil and coolant levels and check for any signs of overheating or excessive smoke, which may indicate engine wear.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb ROBOT 180T(TRACKED). Related factory variants of the same model family:
ROBOT 180TROBOT 180TROBOT-180T
Need a specific ROBOT 180T(TRACKED) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.