JCBagriculturalskid steer loaders (robot)
Jcb ROBOT 180T HF
Maintenance schedule, common problems & OEM parts breakdown
The JCB Robot 180T HF is a compact track loader manufactured from 2008 to 2013, serving as the tracked variant within the Robot skid-steer family. It is powered by a 60-hp (44.74 kW) turbocharged 404C-22T diesel engine and weighs approximately 3,680 kg (8,113 lb). The machine features a 32 GPM high-flow hydraulic system with 3,000 PSI pressure, delivering 56.9 hydraulic HP. It offers an operating capacity of 1,800 lb (816 kg) and a bucket capacity of 0.37 m³ (0.49 cu yd). The Robot 180T HF succeeded the wheeled Robot 180HF and was part of the Robot series that included the 160, 170, and 180 models. Configurations included standard and high-flow hydraulic options, with serial numbers for the 180T HF ranging from the OEM part reference to the OEM part reference.
Across the Robot series, JCB introduced servo transmission controls and high-flow hydraulic options to improve operator comfort and attachment performance. The 180T HF specifically addressed the need for low-ground-pressure traction in landscaping and light construction, distinguishing itself from the wheeled 180HF with its 66-inch track width and 81-inch turning radius. In the used market, the 180T HF remains relevant due to its robust 404C-22T engine and simple mechanical controls, which facilitate easier repair compared to newer electronic models. Its compact size and high-flow hydraulics make it a sought-after unit for utility and municipal fleets requiring versatile attachment compatibility.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb ROBOT 180T HF specifications
Engine
| Model | 404C-22T |
| Gross Power | 44.74 kW (60 hp) |
| Displacement | 2,195.87 cm³ (134 cu in) |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 3,630 kg (8,002.8 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | 0.35 bar (5.06 psi) |
Dimensions
| Transport Length | 3.33 m (10.93 ft) |
| Transport Width | 1.68 m (5.5 ft) |
| Transport Height | 1.93 m (6.35 ft) |
| Track Gauge | 1.37 m (4.45 ft) |
| Ground Clearance | 0.23 m (9.06 in) |
Performance
| Travel Speed | 10 km/h (6.2 mph) |
| Lift Capacity | 820 kg (1,807.8 lb) |
| Breakout Force | 2,573 kg (5,672.5 lb) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 80.24 L (21.2 gal) |
| Hydraulic System | 30.28 L (8 gal) |
| Engine Oil | 9.84 L (2.6 gal) |
| Cooling System | 10.22 L (2.7 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
ROBOT 180T HF fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 2.6 gal (9.8 L) | JCB engine oil or JCB Advanced engine oil (for DPF equipped engines) |
| Cooling system | 2.7 gal (10.2 L) | JCB coolant mixture (anti-freeze solution) |
| Fuel tank | 21.2 gal (80.3 L) | Diesel fuel (Acceptable specifications include low sulphur, aviation kerosene, and fatty acid methyl ester fuels) |
| Transmission (Drive chain compartment) | Not documented for this exact serial range — verify with your dealer | JCB transmission oil |
| Hydraulic system AND tank | 8 gal (30.3 L) | JCB hydraulic oil |
| Grease (spec only) | N/A | JCB grease (JCB boom grease or JCB blue grease) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb ROBOT 180T HF maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the ROBOT 180T HF beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor hydraulic oil quality every 500 hours to prevent contamination damage to the servo transmission and loader valve. Check the hydraulic tank breather every 50 hours to maintain proper pressure and prevent seal failure. Analyze engine oil samples regularly to detect wear in the 404C-22T turbocharged diesel. Inspect the coolant mixture for corrosion inhibitors every 1,000 hours to protect the aluminum components of the cooling system. Track transmission oil levels to ensure proper lubrication of the drive motors and final drives.
Corrective & Common Repairs
Replace the fuel filter element every 250 hours to prevent injector issues in the 404C-22T engine. Clean the air cleaner dust valve frequently to maintain airflow and prevent turbocharger damage. Inspect the drive chain for wear and adjust tension as needed to prevent transmission failure. Check the alternator belt for cracks and adjust tension to ensure proper charging. Replace hydraulic hose seals if leaks are detected at the loader valve or servo pump connections. Inspect the track frame mounting bolts for tightness to prevent structural fatigue.
Overhaul & Rebuild Points
Overhaul the drive motors every 2,000 hours or when performance drops, checking the motor bearing housing and shaft seals. Inspect the track idler wheels and rollers for wear to prevent premature track failure. Check the loader arm lift ram seals for leaks and replace if necessary to maintain lifting capacity. Inspect the servo pump for wear and adjust the charge pressure relief valve if needed. Rebuild the engine if compression drops below specification, focusing on the turbocharger and fuel injection system. Check the transmission oil for metal particles indicating gear wear.
Seasonal & Environment Servicing
Check the coolant mixture for proper freeze protection before winter operations to prevent engine block damage. Clean the coolant radiator every 1,000 hours to ensure adequate heat dissipation in dusty environments. Inspect the track tension to prevent slippage on wet or muddy surfaces. Check the battery electrolyte level and clean terminals to ensure reliable starting in cold weather. Grease the loader arm pivot points and lift ram pivots frequently to prevent corrosion and wear. Inspect the ROPS/FOPS structure for damage to ensure operator safety.
ROBOT 180T HF common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 701/16503 | Insert, Air Filter Blocked, Warning | Air intake service | Check fitment → |
| 02/630935 | Element, Engine Oil Filter | Lubrication service | Check fitment → |
| 332/P4109 | Label, Filter Checking | Scheduled service item | Check fitment → |
| 246/00652 | Filter | Scheduled service item | Check fitment → |
| 580/12156 | Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
ROBOT 180T HF fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Clogged fuel filter, failing lift pump, or restricted fuel line | Check fuel filter condition and fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor or wiring short | Inspect sensor connector for corrosion and test sensor resistance |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low oil level | Verify oil level and test sensor signal with multimeter |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Open circuit in reductant injector wiring or faulty injector | Check injector connector and wiring harness for damage |
| U0100 | Lost communication with Engine Control Module (ECM) | Loose battery terminals, poor ground straps, or damaged CAN bus wiring | Check battery voltage, ground connections, and CAN bus integrity |
| 101 | Low transmission clutch pressure detected | Low transmission fluid, worn clutch pack, or pressure sensor fault | Check transmission fluid level and inspect hydraulic pressure |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
ROBOT 180T HF attachments & work tools
Buckets
General purpose and light duty shovels are listed as standard optional attachments. The machine is equipped with a 0.37 m³ (0.48 cu yd) bucket with a width of 1.73 m (5.7 ft) for the 180T HF variant.
Specialty Buckets
A 6-in-1 shovel is available as an optional attachment. Screening buckets are also listed within the compatible attachment families for this machine class.
Forks
Pallet forks are a standard optional attachment. Manure and silage forks with a top grab mechanism are also listed as compatible work tools.
Ground Engaging Tools
Compatible tools include augers and bits, breaker hammers, brush cutters, cold planers, disc mulchers, drum mulchers, grapples, land planes, log splitters, power rakes, rototillers, stump grinders, trenchers, and tree shears.
Snow & Material Handling
Snow and dirt blades, snow blowers, and snow pushers are listed. Material handling options include bale spears, bale squeezes, feed pushers, material rollers, material spreaders, and trailer movers.
Mounting & Coupling
The machine utilizes a quick release coupling system. The service manual includes specific sections for connecting and disconnecting hydraulic hoses to the attachment frame.
Hydraulic Configuration
The 180T HF model features a high-flow hydraulic circuit. Standard flow is 15 GPM (57 L/min) and high flow is 32 GPM (121 L/min) at 3000 PSI (207 bar).
Undercarriage
The machine is a compact track loader with a transport width of 1.73 m (5.7 ft) and height of 1.93 m (6.3 ft). It uses a Prowler rubber track system.
All ROBOT 180T HF assemblies by section
Every catalogued assembly group for the Jcb ROBOT 180T HF. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-15-1 Teeth
| 13***1D | Nut | 0 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 0 |
| 82***12 | Ploughbolt, 35mm | 0 |
A1-12-1 Guard, Tooth
| 13***0D | Setscrew, M10 X 40mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, Spring, M10 | 4 |
A1-1-3 Shovel G.P., 1730mm Wide
| 24***52 | Shovel, G.P. Hi-Performance, 1730mm Wide | 1 |
| 33***04 | Toeplate, 1710mmx 15mmx 150mm, Drilled | 1 |
| 33***05 | Strip, Wear | 2 |
A1-8-1 Shovel G.P., 1728mm, 0.36cu.M.
| 51***08 | Toeplate | 1 |
| 51***00 | Shovel, G.P., 1728mm, Dirt | 1 |
A1-3-2 Shovel, Low Back, 1730mm, 242/20688
| 13***1D | Nut | 0 |
| 24***88 | Shovel, Low Back,1730mm . | 1 |
| 33***68 | Toeplate | 1 |
A1-4-1 Toeplate, Bolt On
| 13***1Z | Nut | 9 |
| 51***79 | Toeplate, 1560mm | 1 |
| 51***80 | Toeplate, 1728mm | 1 |
A1-3-3 Shovel, Low Back, 1730mm, 242/20658
| 24***58 | Shovel, Low Back, 1730mm | 1 |
| 33***46 | Toeplate | 1 |
A2-1-1 Bucket, Standard, Backhoe Attachment
| 98***00 | Bucket, 200mm (8") | 1 |
| 98***00 | Bucket, 300mm (12") | 1 |
| 98***00 | Bucket, 450mm (18") | 1 |
A3-35-4 Gpr 1820, Caster Wheel, 980/90545
| 33***69 | Bolt, . | 1 |
| 33***72 | Shaft, . | 1 |
| 33***81 | Spacer, Long | 1 |
A3-15-1 Quickhitch, Locking Levers, Option
| 33***14 | Lever, Lh | 1 |
| 33***15 | Lever, Rh | 1 |
| 82***12 | Pin, Lynch | 1 |
A3-30-3 Stump Grinder, Hydraulics
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-30-5 Stump Grinder, Hydraulic Motor, Gearbox
| 20***23 | Motor | 1 |
| 33***21 | Screw | 2 |
| 33***31 | Pin | 1 |
A3-9-1 Sweeper Collector, Sb60, 980/88390
| 13***1Z | Nut | 6 |
| 82***11 | Ploughbolt, 45mm | 6 |
| 98***28 | Attachment, Sweeper/Collector, Sb60 Abi | 1 |
A3-5-3 Earth Drill, Attachments, Dfb Series
| 98***97 | Bit, 6" Earth Drill, Light Duty | 1 |
| 98***98 | Bit, 9" Earth Drill, Light Duty | 1 |
| 98***99 | Bit, 12" Earth Drill, Light Duty | 1 |
A3-13-2 Attachment Backhoe, Mainframe, And Related Parts
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
A3-13-0 Attachment Backhoe
| 98***00 | Attachment, Backhoe | 1 |
| 98***00 | Attachment, Backhoe, With Auxiliary. Circuit | 1 |
A3-9-8 Sprinkler System, Electrical Items, 980/88390
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 15 |
| 70***00 | Switch | 1 |
| 70***49 | Insert, Water Supply | 1 |
A3-9-6 Gutter Brush, Hydraulics,Sb60, 980/88390
| 13***4Z | Bolt | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 16***04 | Adapter, Male/Male | 1 |
A3-14-1 Breaker, Hammermaster 160q
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
| 16***09 | Adapter, Reducing | 2 |
A3-1-3 Quickhitch
| 13***9D | Screw, M16x35lg | 4 |
| 13***0D | Bolt, M10 X 40mm Long | 2 |
| 13***8D | Bolt, M10 X 80 | 2 |
A3-30-1 Stump Grinder, Mainframe
| 33***32 | Ram | 1 |
| 33***33 | Ram | 1 |
| 33***16 | Screw | 2 |
A3-30-6 Stump Grinder, Ram Swing
| 33***27 | Piston | 1 |
| 33***28 | Gland | 1 |
| 33***30 | Bush | 1 |
A3-30-8 Stump Grinder, Control Handle, Harness
| 72***55 | Harness, Control Handle | 1 |
| 72***56 | Harness, Solenoid Connectors | 1 |
A3-35-3 Gpr 1820, Roller Frame, 980/90545
| 33***74 | Washer, . | 1 |
| 33***75 | Roller, Toothed | 1 |
| 33***77 | Frame, . | 1 |
A3-9-3 Sweeper Collector, Labels,Sb60, 980/88390
| 81***42 | Decal, Warning, Before Operating | 1 |
| 81***45 | Decal, "Sweeper Collector" | 1 |
| 81***17 | Decal, Caution | 1 |
A3-5-1 Earth Drill Jcb 1650, Installation
| 13***3D | Bolt, M8 X 55mm | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A3-35-1 Ground Preperation, Rake, Gpr1820
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 16***06 | Adapter, 3/4" Bsp M/M | 3 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-13-3 Controls, Backhoe Attachment
| 13***3Z | Screw, M6x16 | 4 |
| 13***2Z | Nut, M8 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
A3-30-2 Stump Grinder, Cutting Wheel
| 33***49 | Wheel, Square Tooth | 1 |
| 99***23 | Kit, Tooth And Nut | 1 |
A3-5-2 Earth Drill Jcb 1650, Components
| 98***92 | Kit, Earth Drill | 1 |
| 98***74 | Sprocket | 1 |
| 98***75 | Chain, Drive | 1 |
A3-35-2 Gpr 1820, Main Assembley, 980/90545
| 33***86 | Mounting, . | 1 |
| 33***88 | Strap, . | 2 |
| 33***89 | Washer, . | 1 |
A3-30-7 Stump Grinder, Ram, Lift
| 33***27 | Piston | 1 |
| 33***28 | Gland | 1 |
| 33***30 | Bush | 1 |
A3-11-6 Trencher, Decals
| 81***42 | Decal, Warning, Before Operating | 1 |
| 81***75 | Decal, "Jcb"Trencher | 2 |
| 81***02 | Decal, Caution,No Step | 1 |
A3-30-0 Stumpgrinder
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***06 | Adapter, 3/4" Bsp M/M | 3 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-12-2 Shovel, Clam, 6 In 1, 1730mm
| 13***3D | Bolt, M8 X 55mm | 2 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***5D | Bolt, M10x65 | 2 |
A3-30-4 Stump Grinder, Control Valve, Detail
| 25***48 | Valve, Check | 1 |
| 25***49 | Valve, Pressure Compensatio | 1 |
| 25***50 | Valve, Check | 1 |
A3-13-4 Attachment Backhoe, Mountings
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 5 |
| 13***4Z | Bolt, M16x60 | 4 |
| 13***3Z | Nut, M16 | 9 |
A3-9-5 Gutter Brush, For Sb60, 983/00345
| 98***45 | Brush, Gutter,Poly., Woodback | 1 |
| 98***63 | Washer | 4 |
| 98***27 | Motor, White, 12.5 Cu.In. | 1 |
A3-11-1 Trencher, Model 15c, 980/88419
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 2 |
A3-5-4 Earth Drill, Attachments, Lp Series
| 98***04 | Bit, Earth Drill, 12" Heavy Duty | 1 |
| 98***05 | Bit, 18" Earth Drill, Heavy Duty | 1 |
| 98***06 | Bit, 24" Earth Drill, Heavy Duty | 1 |
A3-13-1 Attachment Backhoe, Boom And Dipper
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 13***2Z | Nut, M12 | 0 |
A3-7-1 Fork, Manure & Silage
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***57 | Adapter | 2 |
| 45***00 | Coupling, 3/4 Bsp, Female, Quick Release Type A | 2 |
A3-9-7 Sprinkler System, For Sb60, 980/88390
| 98***47 | Capscrew | 2 |
| 98***49 | Washer | 4 |
| 98***50 | Washer, Spring | 4 |
A3-9-4 Sweeper Collector, Motor,Sb60, 980/88390
| 98***59 | Motor, Hydraulic | 1 |
| 98***94 | Kit-Seal | 1 |
| 98***95 | Ring, Snap | 1 |
A3-6-1 Kit, Bucket Retention
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
A3-9-2 Sweeper Collector, Hydraulics,Sb60, 980/88390
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
A3-8-1 Fork Carrier
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***8D | Washer, Spring, M10 | 4 |
| 29***33 | Plate, Locking | 2 |
B Bodywork, Cab, Loader End
B1-12-1 Guard,Frame, Rear Door
| 13***4D | Bolt, M24x140mm Lg | 2 |
| 13***3D | Nut, Lock M24 | 2 |
| 14***4D | Washer | 4 |
B1-14-1 Rear Grille
| 13***9D | Screw, M12x35mm Long | 2 |
| 14***5D | Washer | 2 |
| 33***53 | Grille, Rear | 1 |
B1-2-5 Door Sill, Robot 180t, Tracked
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M10 | 4 |
| 14***7D | Washer, M8 Plain | 2 |
B1-8-1 Demolition Grille
| 13***9D | Screw, M12x35mm Long | 2 |
| 14***5D | Washer | 2 |
| 33***80 | Grille | 1 |
B1-16-1 Mounting, Front Lights
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 33***04 | Bracket, Lh Front Light | 1 |
B1-2-1 Chassis Fittings
| 13***7D | Screw, M6 X 25mm | 5 |
| 13***8D | Setscrew, M16 X 30mm | 4 |
| 13***0Z | Screw, M10 X 40, High Tensile | 4 |
B1-1-2 Chassis, Robot 180t,Tracked
| 33***05 | Chassis, Robot,180t, Tracked | 1 |
B1-5-1 Tank, Hydraulic
| 12***53 | Gauge, Sight | 1 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
B1-17-1 Brackets, Rear Light
| 13***5D | Setscrew, M8x20 | 4 |
| 13***4D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
B1-6-1 Engine Cover
| 12***87 | Handle, Locking | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***2D | Nut | 2 |
B1-14-2 Rear Grille
| 33***90 | Grille, Rear | 1 |
| 82***10 | Washer, Plain | 4 |
| 82***92 | Screw, Button Head | 4 |
B1-7-1 Soundproofing
| 24***97 | Kit, Ga Soundproofing | 1 |
| 24***98 | Kit, Ga Soundproofing | 1 |
| 33***92 | Panel, Soundproofing, Bulkhead | 1 |
B2-2-1 Door, Tracked Machines
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
B2-23-1 Mirror, Cab Mounted, Exterior & Interior
| 12***00 | Mirror, With Bracket | 2 |
| 12***01 | Bracket | 1 |
| 33***74 | Mirror, Interior, Mirror, Interior; If Required. Machines Built Prior To February 2001 Use Previous Mirror | 1 |
B2-9-1 Polyscreen, Cab
| 24***96 | G.A. | 1 |
| 33***83 | Frame, Windscreen | 1 |
| 82***71 | Windscreen, Polycarbonate, Cab/Canopy | 1 |
B2-8-1 Rear Exit
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 25***03 | Ring, Key | 1 |
| 33***34 | Plate, Rear Exit | 1 |
B2-28-1 Visor, Sun
| 33***90 | Blind, Roller | 1 |
| 82***45 | Rivet, Pop | 2 |
B2-17-1 Cover Plates
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 19***93 | Latch | 2 |
B2-18-1 Link Bar, Manual Controls
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
B2-13-1 Seat Belt, 3 Inch Wide
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B2-19-5 Guard, Roof
| 13***2Z | Bolt, M16 X 50mm | 4 |
| 13***1Z | Nut | 4 |
| 14***1Z | Washer, M16 Plain | 8 |
B2-6-1 Roof Lining
| 33***62 | Lining, Roof | 1 |
| 82***24 | Fastener, Button | 4 |
B2-14-1 Seat
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***00 | Seat, Static, Vinyl | 1 |
B2-1-1 Cab/Canopy Assembly
| 12***08 | Bush, Hinge | 2 |
| 13***3D | Setscrew | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
B2-21-10 Restraint Spring
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
B2-12-1 Seat Belt
| 40***00 | Kit-Seat Belt, With Inertia Reel, 42" Long; Buckle Strap Length 190mm. There Are No Servicable Parts For This Item, Kit-Seat Belt, With Inertia Reel, 42" Long | 1 |
B2-10-1 Polyscreen Canopy
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 24***97 | G.A. | 1 |
B2-26-1 Interior Mouldings
| 33***78 | Cover, Fuse | 1 |
| 33***79 | Cover, Seat Box | 1 |
| 33***24 | Bracket, Fusebox | 1 |
B2-15-1 Control Consoles, Manual
| 24***82 | Cover, Inner, Right | 1 |
| 24***83 | Cover, Outer, Right | 1 |
| 33***73 | Cover, Inner, Left | 1 |
B2-19-1 Guard, Screen
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 33***33 | Bracket, Screen Guard, Right | 1 |
B2-11-1 Seat, Basic
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***07 | Kit-Slide Rail | 1 |
B2-20-1 Lifting Brackets
| 13***4D | Bolt, M16x60, Dacromet | 4 |
| 13***3D | Nut, M16 | 4 |
| 14***1D | Washer, M16 | 8 |
B2-7-1 Cab Mountings
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
| 13***3Z | Nut, M16 | 4 |
B2-20-5 Lift Frame, Single Point Lift
| 13***1Z | Screw, Hexagon Head | 4 |
| 13***1Z | Nut | 4 |
| 14***1Z | Washer, M16 Plain | 8 |
B2-29-1 Window, Sliding
| 33***53 | Window, Sliding | 1 |
| 33***54 | Window, Fixed | 1 |
| 33***55 | Screw, Window Securing | 1 |
B2-21-1 Restraint
| 13***5Z | Bolt, M5 X 20mm Long | 6 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
B2-3-1 Cab Glazing
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 15 |
| 24***49 | Screen, Roof | 1 |
B2-15-5 Control Consoles, Servo
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***7Z | Bolt | 2 |
B2-16-1 Floorplate
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B2-27-1 Cup Holder, Optional
| 13***8D | Screw, M5x30 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
| 14***5D | Washer | 4 |
B2-18-5 Link Bar, Servo
| 13***9Z | Screw, M10x35mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B3-1-5 Arm, Loader, Tracked Machine
| 13***0Z | Bolt, M16 X 40mm | 1 |
| 13***8Z | Bolt, M10x80 | 1 |
| 13***9Z | Bolt, M10x90mm | 4 |
B3-2-1 Safety Strut
| 12***70 | Strut, Safety, 650mm | 1 |
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
B3-3-1 Guard, Hose
| 13***8D | Setscrew, M12 X 30 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***9D | Washer, M12 | 2 |
B5-10-1 Labels, Dutch
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***91 | Label, Danger, Loader Arm, Dutch | 1 |
| 81***97 | Label, Warning, Fan, Benelux (Dutch) | 1 |
B5-5-1 Labels, Italian
| 70***04 | Reflector, Red Selfadhesive, 60 Dia | 2 |
| 81***76 | Label, Ignition, Switch | 1 |
| 81***45 | Label, Warning Italian, Read Operating Book | 1 |
B5-18-11 Decals, Common Parts, Iso Decal En 474
| 33***09 | Label, Filter Checking | 1 |
| 33***27 | Label Iso-10b | 2 |
| 33***34 | Label Iso-07e | 2 |
B5-4-1 Labels, France
| 81***43 | Label, Warning French, Read Operating Book | 1 |
| 81***63 | Label, Danger, Loader Arm, French | 1 |
| 81***64 | Label, Warning, Fan, French | 1 |
B5-2-1 Labels, German
| 81***44 | Label, Warning German, Read Operating Book | 1 |
| 81***37 | Decal, Grease Points | 10 |
| 81***50 | Label, Danger, Loader Arm, German | 1 |
B5-7-1 Labels, Portugal
| 81***47 | Label, Warning Portuguese, Read Operating Book | 1 |
| 81***97 | Label, Danger, Loader Arm, Portugese | 1 |
| 81***01 | Label, Warning, Fan, Portugese | 1 |
B5-15-1 Decals, Black And Silver
| 81***10 | Decal, Robot, Horizontal Format | 1 |
| 81***11 | Decal, Robot, Horizontal Format | 1 |
| 81***98 | Decal, 180t, Vertical Format | 1 |
B5-3-1 Labels, Spain
| 81***48 | Label, Warning Spanish, Read Operating Book | 1 |
| 81***96 | Label, Danger, Loader Arm, Spanish | 1 |
| 81***00 | Label, Warning, Fan, Spanish | 1 |
B5-14-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-6-1 Labels, Denmark
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***50 | Label, Danger, Loader Arm, Danish | 1 |
| 81***53 | Label, Warning, Fan, Danish | 1 |
B5-1-1 Labels
| 81***87 | Decal, Tie Down (Chain) | 0 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***49 | Label, Danger | 1 |
B5-20-1 Fire Extinguisher
| 14***6Z | Washer, M6 | 2 |
| 14***6Z | Washer, Spring | 2 |
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
B5-8-1 Labels, Belgium
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***43 | Label, Warning French, Read Operating Book | 1 |
| 81***63 | Label, Danger, Loader Arm, French | 1 |
B5-11-1 Labels, Finnish
| 81***42 | Label, Warning Finnish, Read Operating Book | 1 |
| 81***36 | Label, Instruction, Safety Strut,Finnish | 1 |
| 81***37 | Label, Loader Arm Danger, Finnish | 1 |
B5-12-1 Labels
| 81***95 | Decal, Warning, Disconnect Battery | 1 |
| 81***97 | Label, Danger, Fluid Under Pressure | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
B5-9-1 Labels, Swedish
| 81***49 | Label, Warning Swedish, Read Operating Book | 1 |
| 81***05 | Label, Warning, Fan, Swedish | 1 |
| 81***06 | Label, Danger, Loader Arm, Swedish | 1 |
C Electrics-Machine, Cab & Engine
C1-6-1 Fuse Link Box
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***1Z | Nut | 2 |
C1-14-5 Switches, Brake Light,Manual, Tracked M/C
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut | 2 |
C1-4-2 Light, Head, Left Hand Dip
| 70***92 | Light, Head, 12v, Left Hand Dip | 1 |
| 70***32 | Lens, Left Hand Dip; Superseded By 70***02 See San 25310 | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C1-9-1 Switches, Electrical
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 70***00 | Switch, Micro | 2 |
| 70***00 | Switch, Oil Pressure M10, Yellow Body Amp | 1 |
C1-12-1 Light, Beacon, Hazard Warning, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***03 | Belt, Driven | 1 |
C1-3-1 Light, Working, Front & Rear
| 12***05 | Bracket | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
C1-8-1 Battery
| 13***7D | Setscrew, M8x25 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 14***9D | Washer, M12 | 2 |
C1-12-2 Light, Beacon, Hazard Warning, Amber, Tall
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Tall, (272mm) | 1 |
| 71***00 | Socket, Accessory | 1 |
C1-2-1 Light, Combination, Front
| 70***00 | Light, Front Combination | 1 |
| 70***01 | Lens, Amber/White | 1 |
| 72***02 | Bulb, 12v 21w | 1 |
C1-11-4 Installation, Reverse Alarm,Manual, Tracked M/C
| 13***5D | Screw, M5x20 | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
C1-5-1 Light, Rear
| 70***01 | Lens | 1 |
| 70***00 | Light, Rear | 2 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-8-5 Battery Isolator, Optional
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 2 |
C1-15-1 Light, Number Plate
| 70***00 | Light, Number Plate | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C1-7-1 Horn, Single Tone
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-14-2 Switches, Brake Light, Servo
| 14***11 | Seal, Bonded | 6 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
| 24***58 | G.A. | 1 |
C1-4-1 Light,Head, Right Hand Dip
| 70***01 | Lens | 1 |
| 70***28 | Light, Head, 12v, Right Hand Dip | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C1-1-1 Harnesses, Machine And Panel, Dump/Anti-Stall Ecu
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
C1-11-10 Installation, Parkbrake,Warning, Manual,Tracked M/C
| 13***5D | Screw, M5x20 | 4 |
| 13***3Z | Nut | 4 |
| 13***3D | Nut, Lock M5 | 4 |
C1-11-2 Reverse Alarm, Servo
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***11 | Seal, Bonded | 4 |
C2-5-1 Alternator Mountings
| 02***28 | Screw | 1 |
| 02***78 | Nut | 1 |
| 02***51 | Washer | 1 |
C2-5-2 Alternator Mountings
| 02***28 | Screw | 1 |
| 02***78 | Nut | 1 |
| 02***51 | Washer | 1 |
C2-5-3 Alternator Mountings
| 02***53 | Lever, Alternator Adjusting | 1 |
| 02***76 | Screw | 1 |
| 02***78 | Nut | 1 |
C2-4-1 Alternator, 55amp
| 02***52 | Fan, Alternator | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***05 | Rectifier | 1 |
C2-3-1 Motor, Starter
| 71***00 | Motor, Starter, 12v | 1 |
| 71***02 | Solenoid | 1 |
| 71***06 | Holder, Brush | 1 |
C2-1-1 Electrical Equipment
| 02***01 | Washer | 1 |
| 70***21 | Switch, Vacuum Pressure | 1 |
| 70***34 | Sensor, Water Temperature | 1 |
C2-4-2 Alternator, 65amp
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 13***8D | Nut, M5 Standard Flanged | 1 |
| 13***8D | Nut, M6 Standard Flanged | 1 |
C3-2-1 Instrument Panel
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***1Z | Nut, M5-8 | 2 |
| 14***04 | Screw, Self Tapping | 3 |
C3-3-1 Wash/Wipe, Windscreen
| 13***9Z | Screw, M5 X 35mm | 2 |
| 24***90 | Tie, Panel Fixing Cable | 3 |
| 24***32 | G.A. | 1 |
C3-10-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-5-1 Switches & Relays
| 24***45 | Fuse/Relay, Mounting Bracket | 1 |
| 70***00 | Cover, Hazard Switch Decal | 1 |
| 70***03 | Cover, Roadlamps, Switch Decal | 1 |
C3-1-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 5 |
D Controls-Machine, Engine & Steering
D1-8-1 Control, Speed Restrictor
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
D1-5-1 Control, Return To Neutral
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***2Z | Nut, M12 | 4 |
| 14***2Z | Washer | 4 |
D1-6-1 Control Levers, Hydrostatic Pump, Manual
| 13***0Z | Bolt | 2 |
| 13***5Z | Bolt | 2 |
| 13***15 | Bolt | 2 |
D1-2-1 Hand Controls
| 12***01 | Stop, Bump | 1 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***2Z | Bolt | 2 |
D1-7-1 Brackets, Pump Lever Stop
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Bolt | 1 |
| 13***2Z | Nut, M8 | 2 |
D1-1-1 Control Levers, Manual
| 24***09 | Handle, Plain, Single Speed | 1 |
| 24***32 | Handle, With Horn Button | 1 |
| 24***33 | Handle, With Indicator | 1 |
D1-4-1 Foot Controls, Aux
| 13***3Z | Screw, M6x16 | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
D1-3-1 Hand Controls, Aux
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 6 |
D2-2-1 Control, Throttle, Hand And Foot
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 2 |
D2-1-1 Control, Hand Throttle, Standard
| 13***3D | Setscrew | 2 |
| 13***1D | Setscrew, M10x45 | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
E Hydraulics & Air Including, Steering
E1-20-1 Circuit, Servo Cutoff Valve
| 13***7Z | Bolt, M10x25 | 2 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-11-1 Circuit, Oil Cooler
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 2 |
E1-4-1 Circuit, Filter
| 61***00 | Hose, 1/2"Bsp 940mm Long | 1 |
| 61***00 | Hose, 5/8"Bsp 1910mm Long | 1 |
| 61***00 | Hose, 5/8"Bsp 640mm Long | 1 |
E1-7-1 Circuit, Loader Aux.
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Bolt, M8 X 55mm | 1 |
| 13***3D | Nut, Self Lock M8 | 3 |
E1-12-1 Circuit, Hydraulic Float
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-1-1 Circuit, Transmission Dump, Anti-Stall
| 13***8D | Bolt, M6x80 | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 3 |
| 24***05 | O Ring | 2 |
E1-6-3 Circuit, Servo Controller, R.H.Dual Control Std. & H.F.-Tracked M/C
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
| 24***05 | O Ring | 1 |
| 25***64 | Lever, Loader Joystick, Rexroth | 1 |
E1-8-1 Circuit, Loader End, Standard
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 33***30 | Hose Clamp | 1 |
| 61***00 | Hose | 1 |
E1-14-2 Valve, Self Level, Fitings And Adaptors
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
E1-9-3 Circuit, Parallel Lift, Tracked M/C
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 22***16 | Clip, Jubilee | 2 |
| 24***73 | Clamp, Hose | 2 |
E1-6-1 Circuit, Servo Controller L.H, Transmission Std. & H.F.
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3D | Nut, M6 Lock | 4 |
| 13***05 | Screw, Cap | 4 |
E1-2-3 Circuit, Hydrostatic Pump, Servo Hf,Tracked M/C
| 16***57 | Adaptor | 2 |
| 22***03 | Clip, Jubilee | 1 |
| 22***09 | Clip, Jubilee | 4 |
E1-11-3 Circuit, Oil Cooler, Servo Build
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 2 |
E1-3-1 Circuit, Drive Motor, Tracked M/C
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 2 |
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 4 |
| 16***67 | Adaptor | 2 |
E1-5-3 Circuit, Servo Controller, L.H. Dual Control Std.& H.F.-Tracked M/C
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 3 |
| 24***05 | O Ring | 3 |
| 25***27 | Lever, Dual Control, Joystick | 1 |
E1-15-1 Circuit, Brake Valve
| 13***9D | Bolt, Special M6x90 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E1-11-2 Circuit, Oil Cooler, Manual Build
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 2 |
E1-5-1 Circuit, Servo Controller Rh, Loader Std. & H.F. Tracked M/C
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
| 24***05 | O Ring | 1 |
| 25***26 | Valve, Joystick Control, Loader, Rexroth | 1 |
E1-2-1 Circuit, Hydrostatic Pump, Servo, Tracked M/C
| 13***1D | Screw, M10x12 | 1 |
| 16***56 | Adaptor | 1 |
| 16***60 | Adapter, M/M | 3 |
E1-16-1 Circuit, High Flow
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E1-2-4 Circuit, Hydrostatic Pump, Manual Hf,Tracked M/C
| 16***57 | Adaptor | 2 |
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 4 |
| 16***60 | Adapter, M/M | 1 |
E1-2-2 Circuit, Hydrostatic Pump, Manual,Tracked M/C
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 4 |
| 16***60 | Adapter, M/M | 1 |
| 22***03 | Clip, Jubilee | 1 |
E1-10-1 Circuit, Lower Valve
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 45***57 | Valve, Ball | 1 |
| 61***00 | Hose | 1 |
E2-4-7 Pump,Hydrostatic, Manual,Components, Front Section
| 20***03 | Plate, Thrust | 1 |
| 20***09 | Pin, Slipper Hold Down | 4 |
| 20***01 | O Ring, .087 X .646 | 4 |
E2-9-1 Pump, Gear, Double
| 20***00 | Pump, Gear, Double | 1 |
| 20***94 | Kit, Seal | 1 |
E2-4-8 Pump,Hydrostatic, Manual,Components, Rear Section
| 20***03 | Plate, Thrust | 1 |
| 20***09 | Pin, Slipper Hold Down | 4 |
| 20***01 | O Ring, .087 X .646 | 4 |
E2-6-1 Pump, Gear, Single
| 20***49 | Pump, Gear, Single | 1 |
| 20***93 | Kit, Seal | 1 |
E2-4-5 Pump, Main Hydraulic, Manual, Tracked M/C
| 13***8Z | Bolt | 8 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***9Z | Washer | 2 |
E2-5-1 Pump, Hydrostatic, Servo, Components
| 13***9D | Screw, M16x35lg | 6 |
| 13***9Z | Bolt, M16 X 35mm | 6 |
| 20***14 | Bearing, Needle | 2 |
E2-3-1 Motor, Drive, Tracked Machines
| 13***08 | Capscrew | 8 |
| 20***16 | Spring | 9 |
| 20***17 | Plug, Assembly | 1 |
E2-7-1 Pump, Hydrostatic, Servo, Components
| 13***9D | Screw, M16x35lg | 6 |
| 13***9Z | Bolt, M16 X 35mm | 6 |
| 20***14 | Bearing, Needle | 2 |
E3-30-1 Valve, Solenoid, Servo Lockout/Brake
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 25***97 | Valve, Solenoid | 1 |
E3-7-2 Valve, Control, Transmission, Left Hand
| 25***82 | Kit, Push Button Covers | 1 |
| 25***83 | Boot, Rubber | 1 |
| 25***84 | Kit, Lever | 1 |
E3-11-1 Mountings, High Flow Valve
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***0D | Bolt, M8x100 | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
E3-12-1 Valve, Components, Manual, Hand Control
| 25***14 | Valve, 3 Spool, Manual, Hand Control | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***16 | Spring, Gold | 1 |
E3-7-1 Valve, Control, Transmission, Left Hand, Page Superseded See E3-7-2
| 25***81 | Handle, Type St | 1 |
| 25***82 | Kit, Push Button Covers | 1 |
| 25***83 | Boot, Rubber | 1 |
E3-14-1 Valve, Components, Manual, Foot Control
| 25***15 | Valve, 3 Spool, Manual, Foot Control | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***17 | Sleeve | 1 |
E3-9-5 Valve, Control, Dual Control R.H.
| 25***10 | Handle, Type Tt; Identical To 25/22***99 See San 12575 | 1 |
| 25***83 | Boot, Rubber | 1 |
| 25***84 | Kit, Lever | 1 |
E3-1-1 Valve Mounting, Manual, Hand Or Foot
| 13***9Z | Screw, M10x35mm | 3 |
| 13***7Z | Screw, Hex Head | 3 |
| 13***3Z | Nut, Lock, M10 | 4 |
E3-2-2 Valve, Manual, Fittings & Adapters
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 2 |
| 16***57 | Adaptor | 2 |
| 17***04 | Plug | 2 |
E3-30-5 Valve, Solenoid, Brake, Adaptors And Mounting
| 13***0D | Setscrew | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
E3-16-1 Valve, Components, Servo
| 25***13 | Valve, 3 Spool, Servo | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***16 | Spring, Gold | 1 |
E3-2-4 Valve, Servo Control, Fittings & Adapters
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 4 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 2 |
| 16***57 | Adaptor | 2 |
E3-9-1 Valve, Control, Dual Control L.H.
| 25***27 | Lever, Dual Control, Joystick | 1 |
| 25***81 | Handle, Type St | 1 |
| 25***82 | Kit, Push Button Covers | 1 |
E3-13-1 Valve, Components, Manual, Hand Control, With Float
| 25***24 | Valve, 3 Spool, Manual, Hand With Float | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***16 | Spring, Gold | 1 |
E3-30-2 Valve, Aux Relief, Anti-Cavitation, Hammer Circuit Only
| 25***85 | Valve, Auxiliary Relief, With Anti-Cavitation; Refer To Robot Catalogues For Location. Only Fitted With Husco Valve Blocks On Robot Machines, Valve, Auxiliary Relief, With Anti-Cavitation; Hammer Circuit Only With Husco Valve Block. Fitted To Valve Block Port 2a Bucket Ram Head Side, Valve, Auxiliary Relief, With Anti-Cavitation | 1 |
| 25***15 | Kit, Seal, With Spring | 1 |
E3-31-1 Valve, Solenoid, Dump
| 25***61 | Valve, Solenoid, Dump | 1 |
| 25***09 | Kit, Seal | 1 |
| 25***10 | Coil, 12v | 1 |
E3-10-2 Filter, Hydraulic, High Flow
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 14***8D | Washer, Spring, M10 | 2 |
E3-10-1 Filter, Hydraulic, Main
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***01 | Washer, Aluminium | 1 |
| 14***08 | Seal, Washer | 1 |
E3-15-1 Valve, Components, Manual, Foot Control, With Float
| 25***25 | Valve, 3 Spool, Manual, Foot With Float | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***16 | Spring, Gold | 1 |
E3-1-2 Mountings, Valve, Servo
| 13***9Z | Screw, M10x35mm | 3 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 3 |
| 13***3Z | Nut, Lock, M10 | 6 |
E4-7-1 Ram, Clamshovel
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***06 | O Ring | 1 |
E4-15-1 Ram, Stabiliser
| 98***00 | Ram, Stabiliser | 1 |
| 98***01 | Kit-Seal, Stabiliser Ram | 1 |
| 98***02 | Head, Piston | 1 |
E4-13-1 Ram, Dipper
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***01 | Head, Piston | 1 |
E4-8-1 Ram, Manure/Silage Forks
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-16-1 Ram, Slew/Swing
| 14***03 | Nipple, Grease | 1 |
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
E4-12-1 Ram, Boom
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***00 | Ram, Boom | 1 |
E4-1-1 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***26 | Spacer, 48.5 X 46 X 27l | 1 |
| 57***56 | Ram, Assembly, Lift | 1 |
E4-14-1 Ram, Bucket, Backhoe Attachment
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***05 | Kit, Seal | 1 |
E4-2-1 Ram, Crowd
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***31 | Ram, Assembly, Bucket | 1 |
| 55***91 | Cylinder | 1 |
E4-20-1 Ram, Industrial Grapple
| 90***03 | Cap | 1 |
| 90***05 | Piston | 1 |
| 90***01 | Kit, Seal | 1 |
J Track & Running Gear
J1-3-1 Idler Wheel, Front, Ital Tractor
| 13***2D | Setscrew | 4 |
| 14***9D | Washer, M12 Spring | 4 |
| 33***61 | Wheel, Front Idler Assembly, Ital Tractor; Superseded By 33***61 See San 25823 | 2 |
J1-2-1 Track Assembly, 320 Wide, Rubber
| 33***09 | Track, 320 Wide,Rubber, 49 Links; 2 Per Machine. Do Not Mix 49 Link And 50 Link Tracks On The Same Machine. | 2 |
| 33***10 | Track, 320 Wide,Rubber, 50 Links | 2 |
J1-4-10 Idler Wheel, Rear, Berco
| 33***40 | Seal, Assembly | 2 |
| 33***41 | Bush | 2 |
| 33***45 | Circlip | 2 |
J1-4-1 Idler Wheel, Rear, Ital Tractor
| 33***63 | Wheel, Rear Idler Assembly, Ital Tractor; Superseded By 33***63 See San 25823 | 1 |
| 33***97 | Seal, Assembly | 2 |
| 33***98 | Bush, Idler Wheel; Superseded By 33***61 See San 21906 | 2 |
J1-1-2 Covers, Track Motors
| 13***5D | Setscrew, M8x20 | 6 |
| 14***7D | Washer, M8 Plain | 6 |
| 33***13 | Cover, Lh Track Motor | 1 |
J1-5-1 Roller, Track Bottom
| 33***59 | Roller | 8 |
| 33***97 | Seal, Assembly | 2 |
| 33***68 | Plug | 1 |
J1-1-1 Track Frame
| 13***7D | Setscrew, M12 X 25 | 2 |
| 13***1D | Bolt, M16 X 45mm | 16 |
| 13***1D | Bolt, Encapsulated | 2 |
J1-3-10 Idler Wheel, Front, Berco
| 33***30 | Bolt | 4 |
| 33***38 | Washer | 4 |
| 33***39 | Bracket, Idler Wheel | 2 |
M Engine 404c-22t Tier 2
M1-15-1 Fans, Pulleys, & Fan Belt, Low Noise Usa&Rest Of World
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
M1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Hr Build
| 02***42 | Key | 1 |
| 02***16 | Gear | 1 |
| 02***23 | Washer, Thrust | 2 |
M1-6-1 Timing Case, Camshaft & Gears, Hr Build
| 02***68 | Key | 1 |
| 02***78 | Nut | 3 |
| 02***79 | O Ring | 1 |
M1-1-1 Engine, Complete, Hr Build
| 01***46 | Engine, 404c-22t Complete, Turbocharged,44.7kw | 1 |
| 01***82 | Engine, Complete 404c-22t, Turbo 65 Amp | 1 |
| 72***15 | Ring, Terminal M5 1.5-2.5 | 1 |
M1-7-1 Flywheel & Housing
| 02***18 | Dowel | 2 |
| 02***75 | Bolt | 6 |
| 02***48 | Flywheel | 2 |
M1-6-2 Timing Levers, Arms & Springs, Hr Build
| 02***96 | Nut | 1 |
| 02***07 | Circlip | 1 |
| 02***11 | Pin | 1 |
M1-5-1 Fans, Pulleys, & Fan Belt, Hr Build
| 01***04 | Belt, Drive | 1 |
| 02***12 | Pulley, Single, D=83mm; Not Included In Assembly. Must Be Used With Spacer 02/10***13., Pulley, Single, D=83mm | 1 |
| 02***52 | Fan, Alternator | 1 |
M1-15-2 Fans, Pulleys, & Fan Belt, Low Noise Eu Only
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
M1-3-1 Block Assembly, Hr Build
| 02***07 | Plug, 8.4mm | 5 |
| 02***13 | Bearing | 1 |
| 02***17 | Dowel | 2 |
M1-8-1 Engine Mountings, Hr Build
| 12***02 | Plate, Compression | 4 |
| 13***2D | Bolt | 4 |
| 13***3D | Nut, M16 | 4 |
M2-2-1 Rocker Assembly, Push Rods & Tappets, Hr Build
| 02***67 | Screw, Adjusting | 8 |
| 02***68 | Nut | 8 |
| 02***71 | Tappet | 8 |
M2-1-1 Cylinder Head, Hr Build
| 02***02 | Plug, D=25 | 5 |
| 02***22 | Stud | 1 |
| 02***42 | Seal, Inlet Valve | 4 |
M2-3-1 Rocker Cover, Hr Build
| 02***73 | Breather, Gauze | 1 |
| 02***78 | Seal | 1 |
| 02***55 | Cap, Engine Oil Filler | 1 |
M2-4-1 Lifting Plates, Engine, Hr Build
| 02***24 | Washer | 2 |
| 02***43 | Plate, Engine Lifting | 2 |
| 82***25 | Screw | 2 |
M3-4-1 Exhaust System, Hr Build
| 12***45 | Spacer | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***7D | Capscrew | 5 |
M3-3-1 Filter, Air, Hr Build
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
M3-2-1 Manifold, Exhaust, Hr Build
| 02***78 | Nut | 4 |
| 02***82 | Gasket, Exhaust Manifold | 1 |
| 02***84 | Screw | 4 |
M3-3-2 Filter Pre-Cleaner, Turbo 3, Optional
| 22***11 | Clip, Jubilee | 1 |
| 33***45 | Adapter, Filter Pre-Cleaner | 1 |
| 33***36 | Filter, Pre-Cleaner, Assembly | 1 |
M3-1-1 Manifold, Induction, Hr Build
| 02***76 | Screw | 2 |
| 02***48 | Pipe, Air Induction | 1 |
| 02***49 | Gasket | 1 |
M4-15-2 Fan Guard, Eu/Hi-Flo, Option
| 13***5D | Setscrew, M8x20 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***2D | Washer, Plain | 4 |
M4-14-2 Combi-Cooler & Hoses, Low Noise, Eu Only
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
M4-4-1 Combi-Cooler & Hoses, 180t
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 22***03 | Clip, Jubilee | 1 |
M4-2-1 Thermostat, Housing, Inlet & Outlet, Hr Build
| 02***96 | Nut | 2 |
| 02***43 | Gasket | 1 |
| 02***44 | Connector, Water Outlet | 1 |
M4-1-1 Pump, Water, Hr Build
| 02***96 | Nut | 3 |
| 02***88 | Screw | 4 |
| 02***89 | Plug, D=30mm | 1 |
M4-15-1 Fan Guard, Eu/Hi-Flo, Option
| 13***3D | Setscrew | 4 |
| 14***1D | Washer, Large | 4 |
| 24***15 | G.A, Fan Guard | 1 |
M4-3-1 Radiator, Fittings & Mountings, 180t
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M8x25 | 14 |
M4-1-30 Pump,Water, Repair Kit, Ti 3/055 Refers
| 02***43 | Gasket | 1 |
| 02***55 | Kit-Gasket | 1 |
| 02***78 | Housing, Thermostat | 1 |
M4-2-2 Thermostat, Housing, Inlet & Outlet, Hr Build
| 02***96 | Nut | 2 |
| 02***89 | Plug, D=30mm | 3 |
| 02***43 | Gasket | 1 |
M4-13-1 Radiator, Fittings & Mountings, Low Noise Usa&Rest Of World
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3D | Setscrew | 4 |
| 13***3D | Setscrew, M8 X 16mm | 6 |
M4-1-2 Pump, Water, Hr Build
| 02***96 | Nut | 1 |
| 02***80 | Pump, Water Assembly | 1 |
| 02***36 | Gasket | 1 |
M4-13-2 Radiator, Fittings & Mountings, Low Noise Eu Only
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3D | Setscrew | 4 |
| 13***3D | Setscrew, M8 X 16mm | 6 |
M4-14-1 Combi-Cooler & Hoses, Low Noise, Usa & Rest Of World
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
M5-5-1 Filter, Oil & Cooler
| 02***16 | Clip, 'P' | 1 |
| 02***95 | Cooler, Engine Oil | 1 |
| 02***35 | Element, Engine Oil Filter | 1 |
M5-5-2 Filter, Oil & Cooler, Hr Build
| 02***16 | Clip, 'P' | 1 |
| 02***95 | Cooler, Engine Oil | 1 |
| 02***35 | Element, Engine Oil Filter | 1 |
M5-4-1 Oil Leak-Off Pipe, & Pressure Switch, Hr Build
| 02***28 | Bolt, Banjo | 1 |
| 02***59 | Washer | 4 |
| 02***41 | Bolt, Banjo | 1 |
M5-1-1 Sump, Oil, Hr Build
| 02***02 | Screw | 2 |
| 02***72 | Bolt | 1 |
| 02***97 | Screw | 30 |
M5-2-1 Pump, Oil, & Relief Valve, Hr Build
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 3 |
| 02***12 | Bush | 3 |
M6-4-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
M6-3-1 Fuel System
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***7D | Setscrew, M8x25 | 2 |
M6-5-1 Pump, Fuel Lift
| 02***69 | O Ring | 1 |
| 02***92 | Screw, M6x16 | 2 |
| 17***00 | Pump, Fuel Lift | 1 |
M6-1-1 Pump, Fuel Injection, & Shut-Off Solenoid, Hr Build
| 02***78 | Nut | 3 |
| 02***01 | Washer | 2 |
| 02***08 | Washer | 2 |
M6-3-2 Fuel System, Electric Fuel Pump
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5D | Setscrew, M8x20 | 1 |
M6-2-1 Injectors, Fuel, & Injection Pipes, Hr Build
| 02***96 | Nut | 3 |
| 02***14 | Damper | 6 |
| 02***04 | Washer, Copper | 1 |
M6-5-2 Pump, Fuel Lift, Electric
M7-3-1 Heater, Engine Block
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***1Z | Nut | 2 |
M7-1-1 Turbocharger, Hr Build
| 02***78 | Nut | 4 |
| 02***38 | Gasket | 1 |
| 02***44 | Washer | 4 |
M7-2-1 Turbocharger, Pipework & Mounting, Hr Build
| 02***09 | Gasket | 2 |
| 02***12 | Washer, Seal | 2 |
| 02***22 | Screw | 4 |
M8-1-2 Gasket Sets, Hr Build
| 02***49 | Seal | 1 |
| 02***09 | Gasket | 3 |
| 02***79 | O Ring | 1 |
M8-1-1 Gasket Sets, Hr Build
| 02***35 | O Ring | 1 |
| 02***49 | Seal | 1 |
| 02***09 | Gasket | 3 |
ROBOT 180T HF serial number reference
Locate the machine identification plate on the frame structure. Verify the serial number falls within the documented ranges for the Robot 180T HF. Confirm applicability with a JCB dealer if the serial number is outside these ranges or if the specific generation is unclear.
| Prefix | Identifies | Notes |
|---|---|---|
| 1803000 to 1806999 | JCB Robot 180T HF skid steer loader (tracked configuration) | |
| 1162000 Onwards | JCB Robot 180T HF skid steer loader (older service manual publication the OEM part reference-14 applicability) |
Frequently asked questions
What engine does the JCB Robot 180T HF use?
The JCB Robot 180T HF is powered by a 60-hp (44.74 kW) turbocharged 404C-22T diesel engine.
What is the operating weight of the JCB Robot 180T HF?
The operating weight of the JCB Robot 180T HF is approximately 3,680 kg (8,113 lb).
What model replaced the JCB Robot 180T HF?
The JCB Robot 180T HF was part of the Robot series and was succeeded by the JCB 180T Multi Terrain Loader.
What ROBOT 180T HF owners discuss
What engine powers the JCB Robot 180T HF and what are its key specifications?
The JCB Robot 180T HF is powered by a 404C-22T turbocharged diesel engine. This engine delivers 60 hp (44.74 kW) at 2800 rpm. The machine has a standard hydraulic flow of 15 gpm and a high-flow capacity of 32 gpm at a system pressure of 3000 psi. The high-flow hydraulic horsepower is rated at 56.9 hp.
What are the known powertrain and hydraulic behaviors for this machine?
The machine utilizes a servo transmission with a Power Management System (P.M.S.). Operators report that the hydraulic drive motors are sensitive to drive chain tension; loose chains can hammer the motors and other drive components. The machine is equipped with a high-flow circuit and a self-levelling valve for the loader arm. The transmission includes forward, reverse, and spin turn capabilities.
What undercarriage or wear patterns are typical for the tracked configuration?
The Robot 180T HF is a compact track loader with a transport width of 1.73 m (5.5 ft) and a transport length of 3.33 m. The operating weight is 3.68 tons (3,680 kg). The design focuses on balanced access for light construction and landscaping. Wear patterns are influenced by the single-sided boom design, which places the loader arm to the left and the engine/cab off-center to the right, though engineers designed the center of gravity to remain balanced.
Are there specific engine quirks or maintenance requirements per series?
The 404C-22T engine requires regular coolant mixture checks and draining. The fuel system includes an in-line fuel filter that must be drained and bled. The cooling system is pressurized; operators must stop the engine and allow it to cool before removing the filler cap to prevent burns. Greasing intervals are specified at 10 hours for quickhitch pivot pins and every 50 hours for loader arm pivot points and lift ram pivots.
What are common electrical or sensor issues reported by owners?
Electrical issues often involve the high-flow relay and fuses. One reported scenario involves loss of drive function after operating in deep water (16-24 inches), where the 5 amp fuse and high-flow relay were suspected causes. The machine uses specific harnesses: the mainframe harness varies by machine number (up to the OEM part reference vs. onwards), and the panel harness differs based on the presence of road lights (split at machine number the OEM part reference). Battery testing and alternator charging tests are standard diagnostic steps.
What is the visibility profile and stability characteristic of the Robot 180T HF?
Visibility is excellent when the loader arm is down but becomes non-existent when the arm is raised. The machine is noted for its stability when getting in and out, particularly when the loader arm is up, making it suitable for frequent entry and exit scenarios. However, some operators note that it may not be as stable as traditional skid steers in all conditions.
What to check when buying a used ROBOT 180T HF?
Verify the serial number falls within the range the OEM part reference to the OEM part reference. Check the drive chain tension, as loose chains cause significant damage to motors. Inspect the high-flow relay and 5 amp fuse for water damage if the machine has been submerged. Confirm the correct harness configuration based on the machine number (road lights presence). Check the coolant level and condition, and ensure the boom safety strut functions correctly. Have your dealer verify the hydraulic system pressure and servo transmission operation.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb ROBOT 180T HF. Related factory variants of the same model family:
ROBOT 180THF(TRACKED)ROBOT 180T HFROBOT 180THF(TRACKED)ROBOT-180T HFROBOT-180THF(TRACKED)ROBOT 180THF(TRACKED)
Need a specific ROBOT 180T HF part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.