JCBagriculturalskid steer loaders (robot)
Jcb ROBOT 170(WHEELED)
Maintenance schedule, common problems & OEM parts breakdown
The JCB Robot 170 is a wheeled skid steer loader manufactured from 2000 to 2013. It features a compact frame with a rated operating capacity of 600 kg and an operating weight ranging from 2,510 kg to 6,900 kg depending on configuration and year. Early models (2000–2007) typically utilized smaller displacement engines, while later iterations (2008–2013) often featured the JCB Eco Max 4.4-liter or 4.8-liter diesel engines. The machine was offered with canopy or ROPS cabin configurations and standard or high-flow hydraulic circuits. It succeeded earlier compact loader lines and was eventually superseded by the JCB 170T and subsequent compact loader generations.
Across its production run, the Robot 170 evolved from basic mechanical controls to servo-assisted and electronic hydraulic systems, particularly with the introduction of the high-flow (HF) variants. The shift to the Eco Max engine series improved fuel efficiency and reduced maintenance complexity by eliminating DEF/DPF requirements in many markets. In the used and parts market, the Robot 170 remains significant due to its widespread adoption in municipal and utility work, creating a robust aftermarket for undercarriage components, hydraulic pumps, and engine parts. Its simple hydrostatic transmission and accessible service points make it a common platform for independent rebuild.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb ROBOT 170(WHEELED) specifications
Engine
| Model | JCB Eco Max 4.4-liter (T3 series) |
| Gross Power | 50 hp (37.3 kW) |
| Net Power | 47 hp (35 kW) |
| Displacement | 4.4 L |
| Emissions Tier | Stage 1 (97/68/EC) |
Weights
| Operating Weight | 2,510–2,520 kg (5,533–5,556 lb) |
Dimensions
| Transport Length | 3.3 m (10 ft 8 in) |
| Transport Width | 1.6 m (5 ft 3 in) |
| Transport Height | 1.94 m (6 ft 4 in) |
Performance
| Travel Speed | 11 km/h (6.8 mph) |
| Rated Operating Capacity | 600 kg (1,323 lb) |
| Lifting Force | 14.5 kN |
| Max Discharge Height | 2.29 m (7 ft 6 in) |
| Bucket Capacity | 0.34–0.36 m³ (0.44–0.47 cu yd) |
Service capacities (summary)
| Fuel Tank | 79.5 L (21.0 gal) |
| Hydraulic System | 30 L (7.9 gal) |
| Engine Oil | 11.1 L (2.9 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb ROBOT 170(WHEELED) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the ROBOT 170(WHEELED) beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil and hydraulic fluid samples at every 500-hour interval to detect early wear metals or coolant intrusion. Check the hydraulic return filter magnet for metallic debris during filter changes. Inspect the engine oil dipstick for emulsification indicating coolant leaks. Verify the hydraulic tank breather is clean to prevent vacuum-induced hose collapse. Track tire pressure daily to ensure even wear on the 15.5/80-24 tires. Log fuel filter restriction indicators to predict clogging before engine starvation occurs.
Corrective & Common Repairs
Address hydraulic hose chafing at the kingpost and loader arm pivots, a common failure point on the Robot 170. Replace worn loader arm pivot pins and bushings to restore hydraulic cylinder alignment. Fix leaking drive motor seals by inspecting drain hoses for excessive flow. Repair cracked ROPS cabin windows or canopy mounts. Replace alternator belts showing glazing or fraying. Fix steering mode selector issues by adjusting linkage stops on servo-controlled models. Replace damaged non-inflatable tire segments individually to restore traction.
Overhaul & Rebuild Points
Rebuild the transmission pump and motor units when charge pressure drops below specification or flow becomes erratic. Overhaul the loader control valve if internal leakage causes drift or slow cycle times. Replace turbocharger shafts and wastegates if excessive play or oil consumption is detected. Rebuild hydraulic cylinders with new rod seals and wipers when scoring or weeping occurs. Inspect and replace drive chain sprockets and links if elongation exceeds limits. Rebuild the engine if compression drops or blue smoke indicates valve guide wear.
Seasonal & Environment Servicing
Adjust coolant mixture concentration for freezing protection before winter operations. Inspect heater core and HVAC blower motors for proper cabin warmth. Check battery electrolyte levels and terminal tightness in cold weather. Lubricate all pivot points with JCB Special MPL grease to prevent moisture ingress. Inspect tires for hardening or cracking in extreme heat. Clean the radiator and charge cooler fins to prevent overheating in dusty or high-ambient conditions. Verify the reversing fan operation to keep cooling systems clear of debris.
ROBOT 170(WHEELED) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 701/16503 | Insert, Air Filter Blocked, Warning | Air intake service | Check fitment → |
| 02/630795 | Element, Oil Filter Canister | Lubrication service | Check fitment → |
| 332/P4109 | Label, Filter Checking | Scheduled service item | Check fitment → |
| 246/00652 | Filter | Scheduled service item | Check fitment → |
| 580/12156 | Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
ROBOT 170(WHEELED) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 203 EN TMP | Engine Temperature Sensor Fault | Faulty coolant temperature sender, open circuit in wiring harness, or short to ground/battery. | Inspect wiring harness connectors for corrosion or water ingress; test sender resistance; replace sender if circuit is intact. |
| 218 HYD PMP | Hydraulic Pump Pressure/Sensor Fault | Faulty hydraulic pressure sensor, low hydraulic fluid level, or pump wear. | Check hydraulic oil level and condition; inspect pressure sensor wiring and connections; verify pump operation. |
| 300 EC1 CAN | CAN Bus Communication Error (ECU 1) | Water in harness connectors, corroded pins, broken communication wire, or faulty module grounding. | Inspect all harness connectors for water and corrosion; check ground points for solidity; verify CAN wire integrity with a scope. |
| C157 | Hydraulic System Sensor/Communication Fault | Sensor malfunction in the hydraulic circuit or communication fault between control modules. | Inspect wiring harnesses and connectors for damage or corrosion; check hydraulic pressure sensors and control modules. |
| C114 | Hydraulic Oil Temperature Sender Fault | Short in wiring for the hydraulic oil temperature sender or faulty sender unit. | Inspect wiring and connector pins for shorts or open circuits; test sender resistance; replace sender if wiring is good. |
| C414 | Transmission/Hydraulic Communication Fault | Sensor malfunction or communication fault in the transmission or hydraulic control systems. | Inspect wiring harnesses and connectors for damage or corrosion; check transmission control module and hydraulic sensors. |
| C692 | Hydraulic/Electrical System Fault | Specific sensor or solenoid fault within the hydraulic or electrical system (model-dependent). | Connect JCB ServiceMaster diagnostic tool to retrieve specific fault details; inspect relevant sensor/solenoid circuits. |
| P0100 | AMF High Side Driver Fault (Torque Reduction) | Open circuit, short to battery, or short circuit in the Actuator/Motor Fault (AMF) high side driver circuit. | Inspect AMF driver circuit wiring for opens or shorts; check connector integrity; verify driver module function. |
| P0101 | MAF Sensor Fault | Mass Air Flow sensor malfunction or circuit error. | Inspect MAF sensor connector and wiring; clean or replace MAF sensor if faulty. |
| P0102 | MAF Low Voltage Fault (Torque Reduction) | Low voltage signal from the Mass Air Flow sensor. | Check MAF sensor power and ground circuits; inspect wiring for damage; replace sensor if necessary. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
ROBOT 170(WHEELED) attachments & work tools
Standard Buckets & Grapples
The primary work tool is a general purpose bucket with a capacity of 0.34 to 0.36 cubic meters (0.45 to 0.47 cubic yards) and a width of 1.58 meters (5.2 feet). Rated operating capacity is 600 kg (1,323 lbs) to 1,543 lbs depending on configuration. Compatible with standard universal skid steer quick hitch couplers.
Specialty Buckets
Available options include 6-in-1 shovels, light material buckets, and manure/silage forks with top grab attachments. These tools utilize the standard quick hitch interface and rely on the machine's auxiliary hydraulic circuit for operation.
High-Flow Attachments
The optional hi-flow circuit provides 124 liters/min (27.3 to 32.5 gal/min) pump flow to the front of the machine for high-capacity attachments such as trenchers, patch planers, and cold planers. This circuit is standard on the 170 HF model and optional on the base 170.
Hydraulic & Coupler Systems
Auxiliary hydraulics are actuated via the right-hand controller for progressive oil flow control. Hydraulic supply pipes run on top of the loader arm under a protective guard. The machine uses a standard universal skid steer quick hitch for tool attachment.
Guarding & Safety Options
Standard protection includes full ROPS and Level I FOPS. Optional Level 2 guarding is available for demolition work. Additional options include full audio and visual warning systems and soundproofing compliant with EC regulations.
All ROBOT 170(WHEELED) assemblies by section
Every catalogued assembly group for the Jcb ROBOT 170(WHEELED). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-9-1 Shovel, Light Duty, 1430mm, 0.40 Cu.M.
| 24***07 | Shovel, Light Duty, 1430mm, 0.40 Cu.M. | 1 |
| 33***41 | Strip, Wear | 2 |
| 51***62 | Sidecutter | 2 |
A1-2-1 Shovel, Low Back, 1560mm
| 13***1Z | Nut | 0 |
| 51***03 | Toeplate | 1 |
| 51***00 | Shovel, Low Back 1560mm | 1 |
A1-6-1 Shovel G.P., 1397mm, 0.28cu.M.
| 51***06 | Toeplate | 1 |
| 51***00 | Shovel, G.P., 1397mm, Dirt | 1 |
A1-12-1 Guard, Tooth
| 13***0D | Setscrew, M10 X 40mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, Spring, M10 | 4 |
A1-3-1 Shovel, Low Back, 1728mm
| 13***1Z | Nut | 0 |
| 51***04 | Toeplate | 1 |
| 51***00 | Shovel, Low Back, 1728mm | 1 |
A1-11-1 Shovel, Light Duty, 1730mm, 0.48 Cu.M.
| 24***09 | Shovel, Light Duty 1730mm, 0.48 Cu.M. | 1 |
| 33***41 | Strip, Wear | 2 |
| 33***85 | Toeplate, 1730 Wide | 1 |
A1-1-2 Shovel G.P., 0.29 Cu.M, 1430mm
| 33***06 | Toeplate, 1410 Mmx 15mmx 150mm, Drilled | 1 |
| 33***85 | Strip, Wear | 2 |
| 33***41 | Sidecutter | 2 |
A1-1-1 Shovel G.P., 0.37 Cu.M
| 33***07 | Toeplate, 1560mmx 15mmx 150mm, Drilled | 1 |
| 33***85 | Strip, Wear | 2 |
| 33***41 | Sidecutter | 2 |
A1-8-1 Shovel G.P., 1728mm, 0.36cu.M.
| 51***08 | Toeplate | 1 |
| 51***00 | Shovel, G.P., 1728mm, Dirt | 1 |
A1-4-1 Toeplate, Bolt On
| 13***1Z | Nut | 9 |
| 51***78 | Toeplate, 1397mm | 1 |
| 51***79 | Toeplate, 1560mm | 1 |
A1-7-1 Shovel G.P., 1560mm, 0.34cu.M.
| 51***07 | Toeplate | 1 |
| 51***00 | Shovel, G.P., 1560mm, Dirt | 1 |
A1-5-1 Shovel, Low Back, 1397mm, 0.28cu.M
| 13***1Z | Nut | 0 |
| 51***00 | Shovel, Low Back, 1397mm | 1 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 0 |
A1-1-3 Shovel G.P., 1730mm Wide
| 24***52 | Shovel, G.P. Hi-Performance, 1730mm Wide | 1 |
| 33***04 | Toeplate, 1710mmx 15mmx 150mm, Drilled | 1 |
| 33***05 | Strip, Wear | 2 |
A1-10-1 Shovel, Light Duty, 1580mm, 0.57 Cu.M.
| 24***08 | Shovel, Light Duty 1580mm, 0.57 Cu.M. | 1 |
| 33***20 | Strip, Wear | 1 |
| 51***62 | Sidecutter | 2 |
A2-1-1 Bucket, Standard, Backhoe Attachment
| 98***00 | Bucket, 200mm (8") | 1 |
| 98***00 | Bucket, 300mm (12") | 1 |
| 98***00 | Bucket, 450mm (18") | 1 |
A3-25-1 Sprinkler System, 980/89426
| 33***82 | Pump, Sprinkler | 1 |
| 33***16 | Tank, Water, 86 Litre | 1 |
| 33***17 | Plug, Electrical | 1 |
A3-5-2 Earth Drill Jcb 1200, Components
| 98***90 | Kit, Power Head | 1 |
| 98***92 | Kit, Earth Drill | 1 |
| 98***74 | Sprocket | 1 |
A3-30-7 Stump Grinder, Ram, Lift
| 33***27 | Piston | 1 |
| 33***28 | Gland | 1 |
| 33***30 | Bush | 1 |
A3-9-3 Sweeper Collector, Hydraulic Circuit, For 980/16000
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 16***04 | Adapter, Male/Male | 4 |
A3-3-3 Earthdrill, Dm1200, From 08/2007
| 98***94 | Kit, Drillmaster 1200, Auger | 1 |
A3-30-1 Stump Grinder, Mainframe
| 33***32 | Ram | 1 |
| 33***33 | Ram | 1 |
| 33***16 | Screw | 2 |
A3-35-4 Gpr 1820, Caster Wheel, 980/90545
| 33***69 | Bolt, . | 1 |
| 33***72 | Shaft, . | 1 |
| 33***81 | Spacer, Long | 1 |
A3-11-20 Trencher, Abi, X14 Xr-14, 6" Wide - 36" Depth
| 33***59 | Cover, Motor | 1 |
| 33***61 | Adapter, Motor To Hose | 2 |
| 33***63 | Sprocket, Motor, Includes Keys | 1 |
A3-24-1 Sweeper Collector, (Jcb) Heavy Duty, Hydraulics For 980/88585
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 16***09 | Adapter, Reducing | 3 |
| 45***00 | Connector, Pressure Test | 1 |
A3-9-18 Gutter Brush, Hydraulics,Sb60, For 980/88390
| 13***4Z | Bolt | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 16***04 | Adapter, Male/Male | 1 |
A3-13-1 Attachment Backhoe, Boom And Dipper
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 13***2Z | Nut, M12 | 0 |
A3-1-1 Quickhitch
| 13***9D | Screw, M16x35lg | 4 |
| 13***0D | Bolt, M10 X 40mm Long | 2 |
| 13***8D | Bolt, M10 X 80 | 2 |
A3-9-11 Sweeper Collector, Sb60,980/88390, Row
| 13***1Z | Nut | 6 |
| 33***36 | Bearing, Holder 2 Hole | 2 |
| 82***11 | Ploughbolt, 45mm | 6 |
A3-14-4 Breaker, Hm265q, 01/01/06 Onwards
| 13***7D | Bolt, M16x75 | 14 |
| 13***3Z | Nut, M16 | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A3-30-5 Stump Grinder, Hydraulic Motor, Gearbox
| 20***23 | Motor | 1 |
| 33***21 | Screw | 2 |
| 33***31 | Pin | 1 |
A3-13-2 Attachment Backhoe, Mainframe, And Related Parts
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
A3-5-1 Earth Drill Jcb 1200, Installation
| 13***3Z | Bolt, M8 X 55 | 1 |
| 14***3Z | Nut | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
A3-9-19 Sprinkler System, Sb60, For 980/88390
| 98***47 | Capscrew | 2 |
| 98***49 | Washer | 4 |
| 98***50 | Washer, Spring | 4 |
A3-16-1 Patch Planer, 980/88842
| 33***91 | Motor | 1 |
| 98***42 | Attachment, Patch Planer | 1 |
A3-10-2 Sweeper Hydraulics, And Drive Chain, For 980/15900
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 13 |
| 13***8Z | Bolt, M10 X 30 | 2 |
A3-11-30 Trench Cleaner Kits, Components
| 33***07 | Arm, Trencher, Cleaner | 1 |
| 33***10 | Kit, Linkage Assembly, 9 Inch | 1 |
| 33***13 | Kit, Linkage Assembly, 11 Inch | 1 |
A3-3-2 Earth Drill, Gearbox, Page Superceded,See A3-5-2
| 98***03 | Housing, Output | 1 |
| 98***04 | Shaft, Output | 1 |
| 98***05 | Cover, End | 1 |
A3-13-0 Attachment Backhoe
| 98***00 | Attachment, Backhoe | 1 |
| 98***00 | Attachment, Backhoe, With Auxiliary. Circuit | 1 |
A3-12-2 Shovel, Clam, 6 In 1
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***5Z | Bolt | 2 |
A3-9-16 Sweeper Collector, Motor,Sb60, For 980/88390
| 98***59 | Motor, Hydraulic | 1 |
| 98***94 | Kit-Seal | 1 |
| 98***95 | Ring, Snap | 1 |
A3-4-1 Earth Drill, Attachments, Page Superceded See A3-5-3 Or A3-5-4
| 13***4Z | Bolt | 3 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
A3-35-3 Gpr 1820, Roller Frame, 980/90545
| 33***74 | Washer, . | 1 |
| 33***75 | Roller, Toothed | 1 |
| 33***77 | Frame, . | 1 |
A3-13-4 Attachment Backhoe, Mountings
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 5 |
| 13***4Z | Bolt, M16x60 | 4 |
| 13***3Z | Nut, M16 | 9 |
A3-10-1 Sweeper Assembly, 980/15900
| 13***7Z | Bolt, M10x25 | 14 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 16 |
A3-23-1 Sweeper Collector, (Jcb) Heavy Duty, 1525mm Wide,980/88585
| 20***97 | Motor, Hydraulic | 1 |
| 20***61 | Kit, Seal | 1 |
| 33***99 | Kit, Seal | 1 |
A3-20-1 Grapple, Industrial
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 8 |
| 13***3Z | Nut, M12 | 8 |
A3-11-6 Trencher, Decals
| 81***42 | Decal, Warning, Before Operating | 1 |
| 81***75 | Decal, "Jcb"Trencher | 2 |
| 81***02 | Decal, Caution,No Step | 1 |
A3-30-8 Stump Grinder, Control Handle, Harness
| 72***55 | Harness, Control Handle | 1 |
| 72***56 | Harness, Solenoid Connectors | 1 |
A3-11-1 Trencher 980/15600, Digging Chain, Page Superceded See Page A3-11-3
| 13***8Z | Bolt | 0 |
| 13***3Z | Nut | 0 |
| 98***00 | Attachment, Trencher | 1 |
A3-9-13 Sweeper Collector, Hydraulics,Sb60, For 980/88390
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
A3-9-1 Sweeper Collector, Bucket & Shroud, Assembly,980/16000
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***9Z | Bolt, M8 X 35mm | 12 |
| 13***1Z | Bolt, M8 X 45 | 4 |
A3-5-3 Earth Drill, Attachments, Dfb Series
| 98***97 | Bit, 6" Earth Drill, Light Duty | 1 |
| 98***98 | Bit, 9" Earth Drill, Light Duty | 1 |
| 98***99 | Bit, 12" Earth Drill, Light Duty | 1 |
A3-3-1 Earth Drill, Page Superceded, See A3-5-1
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, M16 | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A3-35-2 Gpr 1820, Main Assembley, 980/90545
| 33***86 | Mounting, . | 1 |
| 33***88 | Strap, . | 2 |
| 33***89 | Washer, . | 1 |
A3-9-2 Sweeper Collector, Brush Assembly, For 980/16000
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
A3-40-1 Kits, Attachments
| 98***97 | Kit, Hydraulic Float, With Parallel Lift | 1 |
| 98***26 | Kit, Rear Guard | 1 |
| 98***27 | Kit, F/Screen Guard | 1 |
A3-30-6 Stump Grinder, Ram, Swing
| 33***27 | Piston | 1 |
| 33***28 | Gland | 1 |
| 33***30 | Bush | 1 |
A3-11-21 Trencher, Abi, X21 Xr-21, 6" Wide - 48" Depth
| 33***59 | Cover, Motor | 1 |
| 33***61 | Adapter, Motor To Hose | 2 |
| 33***63 | Sprocket, Motor, Includes Keys | 1 |
A3-11-2 Trencher 980/15600, Frame & Components, Page Superceded A3-11-3
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***6Z | Bolt | 1 |
| 13***3Z | Nut, Lock, M10 | 7 |
A3-30-3 Stump Grinder, Hydraulics
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-14-1 Breaker, Hammermaster 160q
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
| 16***09 | Adapter, Reducing | 2 |
A3-11-3 Trencher Model 15c, 980/88419
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 2 |
A3-9-20 Sprinkler System, Electrical Items, For 980/88390
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 15 |
| 70***00 | Switch | 1 |
| 70***49 | Insert, Water Supply | 1 |
A3-15-1 Quickhitch, Locking Levers, Option
| 33***14 | Lever, Lh | 1 |
| 33***15 | Lever, Rh | 1 |
| 82***12 | Pin, Lynch | 1 |
A3-14-5 Breaker, Hm265q, 01/01/06 Onwards
| 16***04 | Adapter, Male/Male | 2 |
| 33***31 | Plunger | 6 |
| 33***13 | Plug, Hex Socket | 1 |
A3-5-4 Earth Drill, Attachments, Lp Series
| 98***04 | Bit, Earth Drill, 12" Heavy Duty | 1 |
| 98***05 | Bit, 18" Earth Drill, Heavy Duty | 1 |
| 98***06 | Bit, 24" Earth Drill, Heavy Duty | 1 |
A3-30-0 Stumpgrinder
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***06 | Adapter, 3/4" Bsp M/M | 3 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-30-2 Stump Grinder, Cutting Wheel
| 33***49 | Wheel, Square Tooth | 1 |
| 99***23 | Kit, Tooth And Nut | 1 |
A3-13-3 Controls, Backhoe Attachment
| 13***3Z | Screw, M6x16 | 4 |
| 13***2Z | Nut, M8 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
A3-35-1 Ground Preperation, Rake, Gpr 1820
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 16***06 | Adapter, 3/4" Bsp M/M | 3 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
A3-14-2 Breaker, Hm165q, 01/01/06 Onwards
| 13***6D | Bolt | 10 |
| 13***3Z | Nut, M16 | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A3-6-1 Kit, Bucket Retention
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
A3-9-12 Sweeper Collector, Sb60,980/88328, Usa
| 13***1Z | Nut | 6 |
| 82***11 | Ploughbolt, 45mm | 6 |
| 98***28 | Attachment, Sweeper/Collector, Sb60 Abi | 1 |
A3-30-4 Stump Grinder, Control Valve, Detail
| 25***48 | Valve, Check | 1 |
| 25***49 | Valve, Pressure Compensatio | 1 |
| 25***50 | Valve, Check | 1 |
A3-14-3 Breaker, Hm165q, 01/01/06 Onwards
| 16***04 | Adapter, Male/Male | 2 |
| 33***31 | Plunger | 6 |
| 33***45 | Buffer, Lock | 1 |
A3-11-10 Trencher, Kit, X14 Xr-14, 6" Wide-36" Depth
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
A3-8-1 Fork Carrier
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
| 29***33 | Plate, Locking | 2 |
A3-2-1 Manual Hitch, Skidsteer Compatible
| 13***9Z | Bolt, M16 X 35mm | 4 |
| 13***8Z | Bolt, M10x80 | 1 |
| 13***0Z | Bolt, M10 X 100 | 1 |
A3-11-11 Trencher, Kit, X21 Xr-21, 6" Wide-48" Depth
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 2 |
A3-9-14 Sweeper Collector, Labels,Sb60, For 980/88390
| 81***42 | Decal, Warning, Before Operating | 1 |
| 81***45 | Decal, "Sweeper Collector" | 1 |
| 81***17 | Decal, Caution | 1 |
A3-12-1 Shovel, Clam, 6 In 1
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
| 13***4Z | Bolt, M10x60 | 4 |
| 13***2Z | Nut | 2 |
A3-9-17 Gutter Brush, For Sb60 980/88390
| 98***45 | Brush, Gutter,Poly., Woodback | 1 |
| 98***63 | Washer | 4 |
| 98***27 | Motor, White, 12.5 Cu.In. | 1 |
A3-7-1 Fork, Manure & Silage
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***05 | Adapter | 2 |
| 16***57 | Adapter | 2 |
B Bodywork, Cab, Loader End
B1-1-20 Chassis
| 13***9Z | Screw, M10x35mm | 6 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
B1-8-1 Demolition Grille
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***57 | Latch | 2 |
| 14***25 | Pawl | 2 |
B1-7-2 Soundproofing
| 24***97 | Kit, Ga Soundproofing | 1 |
| 24***98 | Kit, Ga Soundproofing | 1 |
| 33***92 | Panel, Soundproofing, Bulkhead | 1 |
B1-3-1 Counterweight
| 13***8Z | Screw | 4 |
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
B1-5-1 Tank, Hydraulic
| 12***95 | Breather | 1 |
| 12***87 | Gauge, Sight; Replaced By 12***53 | 1 |
| 12***53 | Gauge, Sight | 1 |
B1-11-1 Guard, Roof
| 13***2Z | Bolt, M16 X 50mm | 4 |
| 13***1Z | Nut | 4 |
| 14***1Z | Washer, M16 Plain | 8 |
B1-14-1 Rear Grille
| 13***9D | Screw, M12x35mm Long | 2 |
| 14***25 | Pawl | 2 |
| 14***5D | Washer | 2 |
B1-7-1 Soundproofing
| 13***9Z | Bolt | 4 |
| 26***38 | Spacer | 4 |
| 33***32 | Panel, Soundproofing, Cab, Rear | 1 |
B1-16-1 Mounting, Front Lights
| 12***00 | Mirror, With Bracket | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
B1-10-1 Bracket, Centering
| 13***0Z | Screw, Set, M16 X 40 Lg | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
| 33***82 | Bracket, Self Centering | 1 |
B1-4-1 Cover, Hydraulic Motor
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B1-16-2 Mounting, Front Lights &, Mirrors
| 13***8Z | Screw, M8x30 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 33***04 | Bracket, Lh Front Light | 1 |
B1-19-1 Lift Frame, Single Point Lift
| 13***1Z | Screw, Hexagon Head | 4 |
| 13***1Z | Nut | 4 |
| 14***1Z | Washer, M16 Plain | 8 |
B1-1-1 Chassis, Robot 160
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 10 |
B1-1-10 Chassis
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 10 |
B1-15-1 Covers, Hoses
| 12***39 | Spacer | 1 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***1D | Setscrew, M8x45 | 1 |
B1-6-2 Engine Cover
| 12***87 | Handle, Locking | 1 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 2 |
B1-2-1 Chassis Fittings
| 13***7Z | Screw, M6 X 25mm Long | 3 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B1-6-1 Engine Cover
| 12***86 | Catch, Vandal Cover | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B1-1-2 Chassis, Robot 170, 160hf
| 13***9Z | Screw, M10x35mm | 6 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
B1-12-1 Guard,Frame, Rear Door
| 13***4D | Bolt, M24x140mm Lg | 2 |
| 13***3D | Nut, Lock M24 | 2 |
| 14***4D | Washer | 4 |
B1-18-2 Brackets, Rear Light
| 13***5D | Setscrew, M8x20 | 4 |
| 13***4D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
B1-17-1 Brackets, Rear Light, Not Uk
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 33***38 | Bracket, Light Mounting, Fender Mount | 1 |
B1-18-1 Brackets, Rear Light
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B1-9-1 Fender, Right Side
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
B2-4-1 Canopy
| 12***08 | Bush, Hinge | 2 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***9Z | Bolt | 4 |
B2-21-1 Polyscreen, Cab
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 24***96 | G.A. | 1 |
| 24***77 | Knob | 3 |
B2-14-1 Seat
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***06 | Seat Static Vinyl | 1 |
B2-9-4 Link Bar
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
B2-11-1 Seat, Basic
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***07 | Kit-Slide Rail | 1 |
B2-25-1 Roof Lining
| 13***5Z | Bolt | 3 |
| 24***70 | Bracket, Support, Roof Lining | 1 |
| 33***64 | Lining, Roof | 1 |
B2-7-1 Cab Mountings
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
| 13***3Z | Nut, M16 | 4 |
B2-10-10 Restraint Spring
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
B2-5-1 Door, Canopy
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
B2-13-1 Seat Belt (3 Inch)
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B2-1-2 Cab Assembly
| 12***08 | Bush, Hinge | 2 |
| 13***3D | Setscrew | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
B2-16-1 Interior Mouldings
| 33***77 | Cover, Harness | 1 |
| 33***78 | Cover, Fuse | 1 |
| 33***79 | Cover, Seat Box | 1 |
B2-2-1 Door
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
B2-3-2 Cab Glazing
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 15 |
| 24***49 | Screen, Roof | 1 |
B2-25-2 Roof Lining
| 33***62 | Lining, Roof | 1 |
| 82***24 | Fastener, Button | 4 |
B2-2-3 Door, Tracked Option
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
B2-15-1 Control Consoles, Manual
| 24***82 | Cover, Inner, Right | 1 |
| 24***83 | Cover, Outer, Right | 1 |
| 24***84 | Cover, Inner, Left | 1 |
B2-22-1 Polyscreen Canopy
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 24***97 | G.A. | 1 |
B2-20-1 Lifting Brackets, 10mm Thick Front
| 13***9Z | Bolt, M16 X 35mm | 4 |
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***3Z | Nut, M16 | 4 |
B2-23-1 Mirror, Cab Mounted, Exterior
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror, With Bracket | 2 |
| 12***01 | Bracket | 1 |
B2-8-1 Cover Plates
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 19***93 | Latch | 2 |
B2-9-1 Link Bar
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
B2-26-1 Cup Holder, Optional
| 13***8D | Screw, M5x30 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
| 14***5D | Washer | 4 |
B2-19-1 Rear Exit
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 25***03 | Ring, Key | 1 |
| 33***34 | Plate, Rear Exit | 1 |
B2-6-1 Floorplate
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B2-2-2 Door
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
B2-9-3 Link Bar, Servo
| 13***9Z | Screw, M10x35mm | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
B2-4-2 Canopy
| 12***08 | Bush, Hinge | 2 |
| 13***3D | Setscrew | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 5 |
B2-18-1 Guard, Screen
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 33***32 | Guard, Screen | 1 |
B2-24-1 Window, Sliding
| 33***53 | Window, Sliding | 1 |
| 33***54 | Window, Fixed | 1 |
| 33***55 | Screw, Window Securing | 1 |
B2-9-2 Link Bar
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
B2-10-1 Restraint
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
B2-5-2 Door, Canopy
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
B2-20-2 Lifting Brackets, 20mm Thick Front
| 13***4Z | Bolt, M16x60 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 8 |
B2-1-1 Cab Assembly
| 12***08 | Bush, Hinge | 2 |
| 13***5Z | Bolt | 4 |
| 13***9Z | Bolt | 4 |
B2-17-1 Control Consoles, Servo
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***7Z | Bolt | 2 |
B2-3-1 Cab Glazing
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 15 |
| 24***03 | Grommet, Blind,Hole Dia 9.5mm, Panel Thicknes 3.5mm | 1 |
B2-12-1 Seat Belt
| 40***00 | Kit-Seat Belt, With Inertia Reel, 42" Long; Buckle Strap Length 190mm. There Are No Servicable Parts For This Item, Kit-Seat Belt, With Inertia Reel, 42" Long | 1 |
B2-10-2 Restraint, Servo
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
B2-10-3 Restraint,Manual, Override Brake
| 13***3Z | Nut | 1 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
B3-3-1 Guard, Hose
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***9Z | Washer | 2 |
B3-4-1 Travel Link, Italy
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 33***63 | Link, Travel | 1 |
| 33***55 | Bracket, Stowage | 2 |
B3-5-1 Travel Strut, Italy
| 12***44 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 24***95 | Insert, Rubber | 2 |
B3-1-1 Arm, Loader
| 13***0D | Setscrew, M16 X 40mm | 1 |
| 13***8D | Bolt, M10 X 80 | 1 |
| 13***9D | Bolt | 4 |
B3-2-1 Safety Strut
| 12***70 | Strut, Safety, 650mm | 1 |
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
B5-16-1 Control Labels
| 81***56 | Label, Direction | 1 |
| 81***57 | Label, Loader End | 1 |
| 81***58 | Label, Manual Control, L.H. | 1 |
B5-12-1 Labels, Noise Level
| 81***69 | Label, Noise, (87lpa) | 1 |
| 81***70 | Label, External Sound Press, 88 Lwa | 1 |
| 81***71 | Label, Sound Level, 89lpa | 1 |
B5-8-1 Labels, Belgium
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***43 | Label, Warning French, Read Operating Book | 1 |
| 81***63 | Label, Danger, Loader Arm, French | 1 |
B5-2-1 Labels, German
| 81***44 | Label, Warning German, Read Operating Book | 1 |
| 81***37 | Decal, Grease Points | 10 |
| 81***50 | Label, Danger, Loader Arm, German | 1 |
B5-30-1 Tool Kit
| 12***01 | Strap | 2 |
| 27***00 | Bag, Tool | 1 |
| 33***49 | Bracket, L.H. | 1 |
B5-10-1 Labels, Dutch
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***91 | Label, Danger, Loader Arm, Dutch | 1 |
| 81***97 | Label, Warning, Fan, Benelux (Dutch) | 1 |
B5-9-1 Labels, Swedish
| 81***49 | Label, Warning Swedish, Read Operating Book | 1 |
| 81***05 | Label, Warning, Fan, Swedish | 1 |
| 81***06 | Label, Danger, Loader Arm, Swedish | 1 |
B5-20-1 Labels
| 81***95 | Decal, Warning, Disconnect Battery | 1 |
| 81***97 | Label, Danger, Fluid Under Pressure | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
B5-6-1 Labels, Denmark
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***50 | Label, Danger, Loader Arm, Danish | 1 |
| 81***53 | Label, Warning, Fan, Danish | 1 |
B5-7-1 Labels, Portugal
| 81***47 | Label, Warning Portuguese, Read Operating Book | 1 |
| 81***97 | Label, Danger, Loader Arm, Portugese | 1 |
| 81***01 | Label, Warning, Fan, Portugese | 1 |
B5-14-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-3-1 Labels, Spain
| 81***48 | Label, Warning Spanish, Read Operating Book | 1 |
| 81***96 | Label, Danger, Loader Arm, Spanish | 1 |
| 81***00 | Label, Warning, Fan, Spanish | 1 |
B5-4-1 Labels, France
| 81***43 | Label, Warning French, Read Operating Book | 1 |
| 81***63 | Label, Danger, Loader Arm, French | 1 |
| 81***64 | Label, Warning, Fan, French | 1 |
B5-5-1 Labels, Italian
| 70***04 | Reflector, Red Selfadhesive, 60 Dia | 2 |
| 81***76 | Label, Ignition, Switch | 1 |
| 81***45 | Label, Warning Italian, Read Operating Book | 1 |
B5-11-1 Labels, Finnish
| 81***42 | Label, Warning Finnish, Read Operating Book | 1 |
| 81***36 | Label, Instruction, Safety Strut,Finnish | 1 |
| 81***37 | Label, Loader Arm Danger, Finnish | 1 |
B5-18-11 Decals, Common Parts, Iso Decal En 474
| 33***09 | Label, Filter Checking | 1 |
| 33***27 | Label Iso-10b | 2 |
| 33***34 | Label Iso-07e | 2 |
B5-2-5 Tool Kit, Stowage
| 12***01 | Strap | 2 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut | 4 |
B5-1-1 Labels
| 81***87 | Decal, Tie Down (Chain) | 0 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***49 | Label, Danger | 1 |
B5-15-1 Decals, Black And Silver
| 81***86 | Decal, 160 Hf, Vertical Format | 1 |
| 81***87 | Decal, 170 Hf, Vertical Format | 1 |
| 81***92 | Decal, 160, Vertical Format | 1 |
C Electrics-Machine, Cab & Engine
C1-12-2 Light, Beacon, Hazard Warning, Amber, Tall
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Tall, (272mm) | 1 |
| 71***00 | Socket, Accessory | 1 |
C1-4-7 Light,Head, Right Hand Dip
| 70***01 | Lens | 1 |
| 70***28 | Light, Head, 12v, Right Hand Dip | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C1-4-1 Light, Head, Right Hand Dip
| 24***13 | Grommet, 32mm Dia | 2 |
| 70***00 | Light, Unit, Right Hand Dip | 2 |
| 70***00 | Body, Headlight | 2 |
C1-9-1 Switches, Electrical
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 70***00 | Switch, Micro | 2 |
| 70***00 | Switch, Oil Pressure M10, Yellow Body Amp | 1 |
C1-11-1 Installation, Reverse Alarm, Manual
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 4 |
C1-15-1 Light, Number Plate
| 70***00 | Light, Number Plate | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C1-8-4 Battery, N.A.
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-16-1 Flasher, Side Repeater, 12 Volt
| 13***1Z | Nut, 4ba Plain | 4 |
| 14***9Z | Washer | 4 |
| 70***00 | Flasher, Side, Repeater | 2 |
C1-8-2 Battery
| 10***00 | Clamp | 1 |
| 14***6Z | Washer, M6 | 2 |
| 71***01 | Lead, Black | 1 |
C1-8-1 Battery Superseded, See C1-8-2
| 29***88 | Clamp, Battery | 1 |
| 72***43 | Battery, Wet Charge,Type 643, Standard Duty | 1 |
| 82***15 | Nut, Wing | 2 |
C1-17-1 Harness Coverplates
| 13***7Z | Screw, M6 X 25mm Long | 6 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
| 33***87 | Cover, Inner | 1 |
C1-12-1 Light, Beacon, Hazard Warning, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***03 | Belt, Driven | 1 |
C1-5-1 Light, Rear
| 70***01 | Lens | 1 |
| 70***00 | Light, Rear | 2 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-1-2 Harnesses
| 71***21 | Harness, 1375mm Extension | 1 |
| 72***55 | Harness, Main | 1 |
| 72***92 | Harness, Cab Roof | 1 |
C1-8-3 Battery, R.O.W.
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 33***12 | Clamp, Battery | 1 |
C1-6-2 Fuse Link Box
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***1Z | Nut | 2 |
C1-7-1 Horn, Single Tone
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
C1-4-5 Light, Head, Right Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***00 | Light, Head Assembly, Right Hand Dip | 2 |
| 70***01 | Lens, Assembly, Headlight | 1 |
C1-11-2 Reverse Alarm, Servo
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***11 | Seal, Bonded | 4 |
C1-14-1 Switches, Brake Light
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***3Z | Nut | 4 |
| 13***3Z | Nut | 4 |
C1-3-1 Light, Working, Front & Rear
| 12***05 | Bracket | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
C1-2-1 Light, Combination, Front
| 70***00 | Light, Front Combination | 1 |
| 70***01 | Lens, Amber/White | 1 |
| 72***02 | Bulb, 12v 21w | 1 |
C1-1-1 Harnesses
| 12***95 | Clip, Harness Support | 1 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
C1-8-5 Battery Isolator, ( Optional )
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 2 |
C1-4-8 Light, Head, Left Hand Dip
| 70***92 | Light, Head, 12v, Left Hand Dip | 1 |
| 70***32 | Lens, Left Hand Dip; Superseded By 70***02 See San 25310 | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C1-6-1 Fuse Link Box
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***30 | Fuse, 30 Amp | 2 |
| 71***40 | Fuse, 40 Amp | 1 |
C1-4-3 Light, Head, Left Hand Dip, Clear
| 70***00 | Light, Head Assembly, Left Hand Dip | 2 |
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
C2-3-1 Alternator, 55amp
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
C2-1-1 Electrical Equipment
| 02***56 | Switch, Oil Pressure | 1 |
| 02***00 | Solenoid, Fuel Shut-Off | 1 |
| 02***01 | Washer | 1 |
C2-4-1 Alternator Mountings
| 02***78 | Nut | 2 |
| 02***42 | Screw | 1 |
| 02***44 | Washer | 2 |
C2-4-2 Alternator Mountings
| 02***28 | Screw | 1 |
| 02***78 | Nut | 1 |
| 02***51 | Washer | 1 |
C2-1-3 Electrical Equipment
| 02***01 | Washer | 1 |
| 70***21 | Switch, Vacuum Pressure | 1 |
| 70***33 | Switch, Engine Oil Pressure | 1 |
C2-5-1 Motor, Starter
| 71***00 | Motor, Starter, 12v | 1 |
| 71***01 | Bush | 1 |
| 71***02 | Solenoid | 1 |
C2-1-2 Electrical Equipment
| 02***01 | Washer | 1 |
| 70***21 | Switch, Vacuum Pressure | 1 |
| 70***07 | Switch, Engine Oil Pressure | 1 |
C2-3-2 Alternator
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
C2-3-3 Alternator, 65amp
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 13***8D | Nut, M5 Standard Flanged | 1 |
| 13***8D | Nut, M6 Standard Flanged | 1 |
C2-5-2 Motor, Starter
| 71***00 | Motor, Starter, 12v | 1 |
| 71***02 | Solenoid | 1 |
| 71***06 | Holder, Brush | 1 |
C3-1-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 5 |
C3-3-1 Wash/Wipe, Windscreen
| 13***9Z | Screw, M5 X 35mm | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C3-5-1 Switches & Relays
| 24***45 | Fuse/Relay, Mounting Bracket | 1 |
| 70***03 | Cover, Roadlamps, Switch Decal | 1 |
| 70***04 | Decal, Beacon Switch | 1 |
C3-2-1 Instrument Panel
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 2 |
| 13***1Z | Nut, M5-8 | 2 |
| 14***04 | Screw, Self Tapping | 3 |
C3-6-1 Air Conditioning, Installation
| 24***96 | G.A. | 1 |
| 24***97 | Unit, Air Conditioning | 1 |
| 30***61 | Receiver, Drier | 1 |
C3-4-1 Wash/Wipe, Rear Screen
| 29***00 | Jet, Washer, Assembly | 1 |
| 70***07 | Cover, Wash, Wipe, Switch Decal | 1 |
| 70***82 | Switch, Wiper | 1 |
C3-10-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-3-2 Wash/Wipe, Windscreen
| 13***9Z | Screw, M5 X 35mm | 2 |
| 24***90 | Tie, Panel Fixing Cable | 3 |
| 24***32 | G.A. | 1 |
D Controls-Machine, Engine & Steering
D1-7-1 Brackets, Pump Lever Stop
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Bolt | 1 |
| 13***2Z | Nut, M8 | 2 |
D1-4-1 Foot Controls, Aux
| 13***3Z | Screw, M6x16 | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
D1-3-1 Hand Controls, Aux
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 6 |
D1-8-1 Control, Speed Restrictor
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
D1-2-1 Hand Controls
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***1Z | Nut, M8 | 1 |
D1-2-2 Hand Controls
| 12***01 | Stop, Bump | 1 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 1 |
D1-2-5 Hand Controls, Pump Lever Stop, Bracket
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 24***67 | Bracket, Pump Lever Stop | 1 |
D1-5-2 Control, Return To Neutral
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***2Z | Nut, M12 | 4 |
| 14***2Z | Washer | 4 |
D1-1-1 Control Levers, Manual
| 23***06 | Gaiter, Lever | 2 |
| 24***56 | Lever, Right | 1 |
| 24***85 | Lever, Left | 1 |
D1-6-1 Control Levers, Hydr0static Pump, Manual
| 13***0Z | Bolt | 2 |
| 13***5Z | Bolt | 2 |
| 13***15 | Bolt | 2 |
D1-5-1 Control, Return To Neutral
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***2Z | Nut, M12 | 4 |
| 14***2Z | Washer | 4 |
D2-2-2 Control, Throttle, Hand And Foot
| 13***3Z | Screw, M6x16 | 2 |
| 13***1Z | Bolt | 3 |
| 13***1Z | Nut | 1 |
D2-1-2 Control, Hand Throttle, Standard
| 13***3Z | Screw, M6x16 | 2 |
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
D2-1-1 Control, Hand Throttle, Standard
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 1 |
D2-2-1 Control, Throttle, Hand And Foot
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 2 |
E Hydraulics & Air Including, Steering
E1-21-2 Hose And Pipework, Servo Cutoff Valve, Backhoe Mtg. Kit. Husco Valve Block
| 13***7Z | Bolt, M10x25 | 2 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-14-2 Hose And Pipework, Self Level Valve
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-10-1 Hose And Pipework, Lower Valve
| 14***11 | Seal, Bonded | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
| 16***02 | Adapter | 1 |
E1-12-3 Hose And Pipework, Hydraulic Float
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-11-4 Oil Cooler
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 1 |
| 24***08 | O Ring | 2 |
| 30***25 | Cooler, Combination | 1 |
E1-15-1 Oil Cooler, High Flow, Additional
| 30***00 | Cooler, Oil | 1 |
| 30***05 | Cooler, Oil | 1 |
| 33***58 | Pipe, Assembly | 1 |
E1-2-1 Hose And Pipework, Hydrostatic Pump, Servo
| 13***1D | Screw, M10x12 | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
| 14***11 | Seal, Bonded | 1 |
E1-6-3 Hose And Pipework, Servo Controller L.H, Transmission Std. & H.F.
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 13***05 | Screw, Cap | 4 |
| 14***6Z | Washer, M6 | 4 |
E1-11-5 Oil Cooler
| 16***59 | Adaptor, 3/4", Includes O-Ring 17***05 | 1 |
| 24***08 | O Ring | 2 |
| 30***25 | Cooler, Combination | 1 |
E1-5-3 Hose And Pipework, Servo Controller, L.H. Dual Control Std. & H.F.
| 16***02 | Adapter | 3 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 3 |
| 24***05 | O Ring | 4 |
E1-2-4 Hose And Pipework, Hydrostatic Pump, Manual Hf
| 14***11 | Seal, Bonded | 1 |
| 16***08 | Adapter | 2 |
| 16***57 | Adaptor | 2 |
E1-14-1 Hose And Pipework, Self Level Valve
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-12-1 Hose And Pipework, Hydraulic Float
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-21-3 Hose And Pipework, Servo Cutoff Valve, Backhoe Mtg. Kit
| 13***7Z | Bolt, M10x25 | 2 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-20-1 Hose And Pipework, Servo Cutoff Valve
| 13***7Z | Bolt, M10x25 | 2 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-3-1 Hose And Pipework, Drive Motor
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***2D | Setscrew, M16 X 40 | 8 |
| 13***2D | Nut, Thin | 2 |
E1-6-1 Hose And Pipework, Servo Controller, Transmission
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 4 |
| 16***02 | Adapter | 4 |
E1-11-3 Oil Cooler, Non Eu Territory'S
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 30***73 | Cooler, Oil | 1 |
E1-17-1 Circuit, Industrial Grapple
| 14***11 | Seal, Bonded | 10 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-21-1 Hose And Pipework, Servo Cutoff Valve, Backhoe Mtg. Kit
| 13***7Z | Bolt, M10x25 | 2 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-20-2 Hose And Pipework, Servo Cutoff Valve
| 13***7Z | Bolt, M10x25 | 2 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-5-2 Hose And Pipework, Servo Controller, Loader Std. & H.F.
| 16***02 | Adapter | 6 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
| 24***05 | O Ring | 1 |
E1-11-1 Oil Cooler
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 30***73 | Cooler, Oil | 1 |
E1-2-2 Hose And Pipework, Hydrostatic Pump, Manual
| 14***11 | Seal, Bonded | 1 |
| 16***11 | Adapter | 3 |
| 16***60 | Adapter, M/M | 3 |
E1-2-10 Hose And Pipework, Hydrostatic Pump, Servo
| 13***1D | Screw, M10x12 | 1 |
| 16***60 | Adapter, M/M | 5 |
| 22***03 | Clip, Jubilee | 1 |
E1-5-1 Hose And Pipework, Servo Controller, Loader
| 16***02 | Adapter | 6 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
| 24***05 | O Ring | 1 |
E1-11-2 Oil Cooler, Hi Flow
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
E1-2-30 Hose And Pipework, Hydrostatic Pump, Servo Hf
| 16***57 | Adaptor | 2 |
| 22***03 | Clip, Jubilee | 1 |
| 22***09 | Clip, Jubilee | 1 |
E1-2-3 Hose And Pipework, Hydrostatic Pump, Servo Hf
| 14***11 | Seal, Bonded | 1 |
| 16***08 | Adapter | 2 |
| 16***57 | Adaptor | 2 |
E1-6-4 Hose And Pipework, Servo Controller, R.H. Dual Control Std. & H.F.
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 13***05 | Screw, Cap | 4 |
| 14***6Z | Washer, M6 | 4 |
E1-16-1 Hose And Pipework, High Flow
| 13***0Z | Bolt, M8x40 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***11 | Seal, Bonded | 1 |
E1-22-1 Hose And Pipework, Servo Cutoff Valve, Dual Controls
| 13***7Z | Bolt, M10x25 | 2 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-6-2 Hose And Pipework, Servo Controller, Transmission
| 16***02 | Adapter | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
| 24***05 | O Ring | 1 |
E1-9-1 Hose And Pipework, Parallel Lift
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 14***9Z | Washer, Locking | 4 |
| 14***2Z | Washer, M20 | 4 |
E1-8-1 Hose And Pipework, Loader End, Standard
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 33***30 | Hose Clamp | 1 |
| 61***00 | Hose, 1/2bspx1980 | 1 |
E1-7-1 Hose And Pipework, Loader Aux.
| 13***9D | Setscrew, M8x35 | 2 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Bolt, M8 X 55 | 1 |
E1-4-1 Hose And Pipework, Filter
| 61***00 | Hose, 1/2"Bsp 940mm Long | 1 |
| 61***37 | Hose | 1 |
| 61***00 | Hose, 5/8"Bsp 1910mm Long | 1 |
E1-12-2 Hose And Pipework, Hydraulic Float
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E2-6-1 Pump, Gear
| 20***00 | Pump, Gear, Single | 1 |
| 20***49 | Pump, Gear, Single | 1 |
| 20***93 | Kit, Seal | 1 |
E2-2-1 Motor, Drive, Upper, Sae "O" Ring Ports
| 13***2D | Setscrew, M16 X 40 | 4 |
| 20***82 | Poppet | 1 |
| 20***83 | Shim | 0 |
E2-8-1 Pump Hydrostatic, Manual, Components
| 20***19 | Plug | 1 |
| 20***00 | Pump, Gear, Double | 1 |
| 20***00 | Pump, Hi-Flow, Manual, Double Gear | 1 |
E2-4-2 Pump, Hydrostatic, Manual, Components
| 20***19 | Plug | 1 |
| 20***00 | Pump, Hydrostatic, Std.; San 22123.S/S To 20/21***00.Cost Cheaper For, Cpt Assembly Then Just Hydrostatic Pump.P Gamble | 1 |
| 20***49 | Pump, Hydrostatic, Std. | 1 |
E2-1-2 Motor, Drive, Lower, Bsp Ports
| 13***2D | Setscrew, M16 X 40 | 8 |
| 20***00 | Motor, Drive, Lower; Superseded By Assembly 24***66 See San 21224 | 1 |
| 20***82 | Poppet | 1 |
E2-5-1 Pump, Hydrostatic, Servo, Components
| 13***9D | Screw, M16x35lg | 6 |
| 13***9Z | Bolt, M16 X 35mm | 6 |
| 20***14 | Bearing, Needle | 2 |
E2-2-2 Motor, Drive, Lower, Sae "O" Ring Ports
| 13***2D | Setscrew, M16 X 40 | 8 |
| 20***82 | Poppet | 1 |
| 20***83 | Shim | 0 |
E2-3-2 Motor, Drive, Lower, Motor Reference 160 0090 005
| 20***26 | Motor, Assembly Lower | 1 |
| 20***62 | Kit, Seal | 1 |
E2-4-1 Pump, Main Hydraulic, Manual
| 13***8Z | Bolt | 8 |
| 13***9D | Screw, M12x35mm Long | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
E2-1-1 Motor, Drive, Upper, Bsp Ports
| 13***2D | Setscrew, M16 X 40 | 4 |
| 20***00 | Motor, Drive, Upper; Superseded By Assembly 24***65 See San 21224 | 1 |
| 20***82 | Poppet | 1 |
E2-9-1 Pump, Gear
| 20***00 | Pump, Gear, Double | 1 |
| 20***94 | Kit, Seal | 1 |
E2-7-1 Pump, Hydrostatic, Servo, Components
| 13***9D | Screw, M16x35lg | 6 |
| 13***9Z | Bolt, M16 X 35mm | 6 |
| 20***14 | Bearing, Needle | 2 |
E2-3-1 Motor, Drive, Upper, Motor Reference 159 0143 005
| 20***25 | Motor, Assembly Upper | 1 |
| 20***62 | Kit, Seal | 1 |
E3-30-2 Valve Solenoid, Servo Cutoff
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 25***97 | Valve, Solenoid | 1 |
E3-9-2 Valve, Control, Dual Control L.H.
| 25***81 | Handle, Type St | 1 |
| 25***82 | Kit, Push Button Covers | 1 |
| 25***83 | Boot, Rubber | 1 |
E3-6-2 Valve, Self Level
| 25***01 | Pin | 1 |
| 25***02 | Cap, Adjustment | 1 |
| 25***03 | Screw | 1 |
E3-2-1 Valve, Manual, Fittings & Adapters
| 14***11 | Seal, Bonded | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
| 16***07 | Adapter | 1 |
E3-1-2 Valve Mounting, Manual, Hand Or Foot
| 13***9Z | Screw, M10x35mm | 3 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 3 |
| 13***3Z | Nut, Lock, M10 | 4 |
E3-40-1 Spin Turn Stops, Rexroth Tran J/Stick
| 33***06 | Stop, Outer | 1 |
| 33***07 | Stop, Inner | 1 |
E3-1-1 Valve Mounting
| 13***8Z | Bolt, M10 X 30 | 3 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 3 |
| 13***3Z | Nut, Lock, M10 | 6 |
E3-11-2 Mountings, High Flow Valve
| 13***1Z | Bolt | 2 |
| 13***1Z | Bolt, M8x110 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
E3-30-3 Valve, Aux Relief, Anti-Cavitation, Hammer Circuit Only
| 25***85 | Valve, Auxiliary Relief, With Anti-Cavitation; Refer To Robot Catalogues For Location. Only Fitted With Husco Valve Blocks On Robot Machines, Valve, Auxiliary Relief, With Anti-Cavitation; Hammer Circuit Only With Husco Valve Block. Fitted To Valve Block Port 2a Bucket Ram Head Side, Valve, Auxiliary Relief, With Anti-Cavitation | 1 |
| 25***15 | Kit, Seal, With Spring | 1 |
E3-50-1 Valve, Control, Excavator, 6 Spool, Backhoe Attachment
| 25***12 | Bush | 1 |
| 98***01 | Valve, 6 Spool | 1 |
| 98***02 | Valve, Cartridge | 4 |
E3-30-1 Valve, Solenoid, Servo Cutoff
| 25***76 | Valve, Solenoid | 1 |
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
E3-12-1 Valve, Components, Manual, Hand Control
| 25***14 | Valve, 3 Spool, Manual, Hand Control | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***16 | Spring, Gold | 1 |
E3-13-1 Valve, Components, Manual, Hand Control, With Float
| 25***24 | Valve, 3 Spool, Manual, Hand With Float | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***16 | Spring, Gold | 1 |
E3-9-5 Valve, Control, Dual Control R.H., Page Superseded See E3-9-6
| 25***10 | Handle, Type Tt; Identical To 25/22***99 See San 12575 | 1 |
| 25***83 | Boot, Rubber | 1 |
| 25***84 | Kit, Lever | 1 |
E3-51-1 Valve, Control, Excavator, 7 Spool, Backhoe Attachment
| 98***02 | Valve, Cartridge | 4 |
| 98***03 | Valve, Anti Cavitation | 2 |
| 98***04 | Cover, Outlet | 1 |
E3-7-3 Valve, Control, Transmission, Left Hand
| 25***81 | Handle, Type St | 1 |
| 25***82 | Kit, Push Button Covers | 1 |
| 25***83 | Boot, Rubber | 1 |
E3-2-2 Valve, Manual, Fittings & Adapters
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
| 16***08 | Adapter | 2 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 2 |
E3-10-2 Filter, Hydraulic, High Flow
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 14***8D | Washer, Spring, M10 | 2 |
E3-5-1 Valve, Components, Manual, Foot Control
| 25***00 | Valve, 3 Spool, Foot | 1 |
| 25***22 | Valve, Relief | 1 |
| 25***23 | Valve, Releif | 1 |
E3-10-1 Filter, Hydraulic, Charge Circuit
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***01 | Washer, Aluminium | 1 |
| 14***08 | Seal, Washer | 1 |
E3-16-1 Valve, Components, Servo, Husco
| 25***13 | Valve, 3 Spool, Servo | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***16 | Spring, Gold | 1 |
E3-7-1 Valve, Control, Transmission, Left Hand
| 13***03 | Nut | 4 |
| 13***1Z | Nut | 1 |
| 13***2Z | Nut, Thin M20 | 1 |
E3-14-1 Valve, Components, Manual, Foot Control
| 25***15 | Valve, 3 Spool, Manual, Foot Control | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***17 | Sleeve | 1 |
E3-3-1 Valve, Components, 3 Spool, Hand Controls
| 25***00 | Valve, 3 Spool, Hand Controls | 1 |
| 25***22 | Valve, Relief | 1 |
| 25***23 | Valve, Releif | 1 |
E3-11-1 Mountings, High Flow Valve
| 13***1Z | Bolt | 2 |
| 13***1Z | Bolt, M8x110 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
E3-7-2 Valve, Control, Transmission L.H., Page Superseded See E3-7-3
| 25***81 | Handle, Type St | 1 |
| 25***82 | Kit, Push Button Covers | 1 |
| 25***83 | Boot, Rubber | 1 |
E3-4-1 Valve, Components, Servo, 3 Spool
| 25***00 | Valve, 3 Spool, Servo | 1 |
| 25***22 | Valve, Relief | 1 |
| 25***23 | Valve, Releif | 1 |
E3-9-6 Valve, Control, Dual Control R.H.
| 25***83 | Boot, Rubber | 1 |
| 25***84 | Kit, Lever | 1 |
| 25***86 | Plate, Retaining | 1 |
E3-15-1 Valve, Components, Manual, Foot Control, With Float
| 25***25 | Valve, 3 Spool, Manual, Foot With Float | 1 |
| 25***15 | Valve, Main Relief | 1 |
| 25***16 | Spring, Gold | 1 |
E3-9-1 Valve, Control, Dual Control L.H., Page Superseded See E3-9-2
| 25***27 | Lever, Dual Control, Joystick | 1 |
| 25***81 | Handle, Type St | 1 |
| 25***82 | Kit, Push Button Covers | 1 |
E3-2-4 Valve, Servo Control, Fittings & Adapters, Husco
| 16***02 | Adapter | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
| 16***08 | Adapter | 2 |
E3-2-3 Valve, Servo Control, Fittings & Adapters
| 14***11 | Seal, Bonded | 5 |
| 16***02 | Adapter, 1/4" Bsp M/M | 4 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
E3-8-1 Valve, Control, Loader, Right Hand
| 13***03 | Nut | 4 |
| 13***1Z | Nut | 1 |
| 13***2Z | Nut, Thin M20 | 1 |
E3-20-1 Lubrication
| 40***01 | Oil, Jcb 10w/30, 25 Litres | 1 |
| 40***02 | Oil, Jcb 10w/30, 5 Litres; See Also Note 1. Jcb 10w30 Engine Oil Used For Intial Fill Purposes., Oil, Jcb 10w/30, 5 Litres, Oil, Jcb 10w/30, 5 Litres; See Also Note 1. Jcb 10w30 Engine Oil Used For Initial Fill Purposes. | 1 |
| 40***03 | Oil, Jcb 10w/30, 200 Litres | 1 |
E3-6-1 Valve, Self Level
| 25***00 | Valve, Self Level | 1 |
| 25***01 | Pin | 1 |
| 25***02 | Cap, Adjustment | 1 |
E3-8-2 Valve, Control, Loader, Right Hand
| 25***10 | Handle, Type Tt; Identical To 25/22***99 See San 12575 | 1 |
| 25***26 | Valve, Joystick Control, Loader, Rexroth | 1 |
| 25***83 | Boot, Rubber | 1 |
E4-2-1 Ram, Crowd
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***28 | Ram, Shovel | 1 |
| 55***91 | Ram, Assembly, Bucket; Use 55***31 Export Version | 1 |
E4-13-1 Ram, Dipper
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***01 | Head, Piston | 1 |
E4-12-1 Ram, Boom
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***00 | Ram, Boom | 1 |
E4-7-1 Ram, Clamshovel
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***06 | O Ring | 1 |
E4-1-1 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***26 | Spacer, 48.5 X 46 X 27l | 1 |
| 57***05 | Ram, Lift | 1 |
E4-16-1 Ram, Slew/Swing
| 14***03 | Nipple, Grease | 1 |
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
E4-15-1 Ram, Stabiliser
| 98***00 | Ram, Stabiliser | 1 |
| 98***01 | Kit-Seal, Stabiliser Ram | 1 |
| 98***02 | Head, Piston | 1 |
E4-8-1 Ram, Manure/Silage Forks
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-20-1 Ram, Industrial Grapple
| 90***03 | Cap | 1 |
| 90***05 | Piston | 1 |
| 90***01 | Kit, Seal | 1 |
E4-14-1 Ram, Bucket
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***05 | Kit, Seal | 1 |
F Axles, Wheels & Transmission
F1-1-1 Hub & Components, Front Right Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***6D | Bolt, M12x70 | 2 |
| 13***0D | Setscrew, M16x40 | 7 |
F1-3-1 Scraper, Oil
| 45***32 | Block, Oil Scraper, Front | 1 |
| 45***33 | Block, Oil Scraper, Rear | 1 |
| 81***39 | Spring | 2 |
F1-3-2 Kit, Sprocket Shim
| 13***9Z | Bolt, M16 X 35mm | 1 |
| 13***0Z | Bolt, M16 X 40mm | 1 |
| 24***05 | Kit, Sprocket Shim | 1 |
F1-1-2 Hub & Components, Front Right Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***6D | Bolt, M12x70 | 2 |
| 13***3D | Bolt | 2 |
F1-2-2 Hub & Components, Front Left Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***0D | Setscrew, M16x40 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F1-2-1 Hub & Components, Front Left Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***0D | Setscrew, M16x40 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F2-1-1 Hub & Components, Rear Right Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***6D | Bolt, M12x70 | 2 |
| 13***0D | Setscrew, M16x40 | 7 |
F2-1-2 Hub & Components, Rear Right Hand
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***6D | Bolt, M12x70 | 2 |
F2-3-1 Scraper, Oil
| 45***32 | Block, Oil Scraper, Front | 1 |
| 45***33 | Block, Oil Scraper, Rear | 1 |
| 81***39 | Spring | 2 |
F2-2-2 Hub & Components, Rear Left Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***0D | Setscrew, M16x40 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F2-2-1 Hub & Components, Rear Left Hand
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***0D | Setscrew, M16x40 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F3-1-5 Wheels & Tyres, 10x16.5, 1600 Wide
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***09 | Wheel, Assembly Std, 10x16.5 1600 Wide | 4 |
F3-4-2 Wheel & Tyres, Segmented, 8 Stud, 10 X 16.5, 1472 Wide Track
| 24***51 | Wheel, Assembly, Segmented, L.H. | 2 |
| 24***52 | Wheel, Assembly, Segmented, R.H. | 2 |
| 41***00 | Wheel, Centre, 10/16.5, L.H. | 1 |
F3-5-4 Wheels & Tyres, Solid, 8 Stud, 700 X 15-5.5, 1383 Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***63 | Wheel, Assembly, Solid, 700 X 15-5.50 | 4 |
| 41***00 | Wheel, Centre, Split | 1 |
F3-2-1 Wheels & Tyres, 8 Stud, 7.00 X 15std, 1372 Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***61 | Wheel, Assembly, 7.00 X 15, 6 Ply, 1370mm, Wheel, Assembly, 7.00 X 15, 6 Ply, 1370mm; 1372mm. 1372mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
| 41***00 | Wheel, Centre | 1 |
F3-2-3 Wheels & Tyres, 8 Stud, 7.00, R15 Xzm, 1372 Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***64 | Wheel, Assembly, 7 X 15, Xzm Michelin, Wheel, Assembly, 7 X 15, Xzm Michelin; 1372mm. 1372mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-1-3 Wheels & Tyres, 8 Stud, 10 X 16.5, 1600 Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 15***01 | Valve | 1 |
| 24***02 | Nut, Wheel | 8 |
F3-1-12 Wheels & Tyres, 8 Stud, 10 X 16.5, 1574 Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***57 | Wheel, Assembly, 10 X 16.5, 8 Ply, Galaxy; 1574mm. 1574mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-5-3 Wheels & Tyres, Solid, 8 Stud, 7.50 X 16, 1408 Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***66 | Wheel, Assembly, Solid, 7.5 X 16 | 4 |
| 41***00 | Wheel, Centre, Split | 1 |
F3-5-2 Wheels & Tyres, Solid, 8 Stud, 6.50 X 16, 1364 Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***65 | Wheel, Assembly, Solid, 6.5 X 16 | 4 |
| 41***00 | Wheel, Centre, Split | 1 |
F3-1-4 Wheels & Tyres, 10 X 16.5 Std., 1524 Wide
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***08 | Wheel, Assembly Std., 10x16.5-1524 Wide | 4 |
F3-1-16 Wheels & Tyres, 8 Stud, 10 X 16.5, 1574 Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***59 | Wheel, Assembly, 8 Ply, Galaxy; 1574mm. 1574mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-1-10 Wheels & Tyres, 8 Stud, 10 X 16.5, 1498 Wide Track
| 15***01 | Valve | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***56 | Wheel, Assembly, 10 X 16.5, Beefy Baby Ii; 1498mm. 1498mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-4-1 Wheel & Tyres, Segmented, 8 Stud, 7 X 15, 1443 Wide Track
| 24***49 | Wheel, Assembly, Segmented, L.H. | 2 |
| 24***50 | Wheel, Assembly, Segmented, R.H. | 2 |
| 41***00 | Wheel, Centre, 7 X 15, L.H. | 1 |
F3-1-14 Wheels & Tyres, 8 Stud, 10 X 16.5, 1498 Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***58 | Wheel, Assembly, 10 X 16.5, King Kong; 1498mm. 1498mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-1-1 Wheels & Tyres, 8 Stud, 10 X 16.5, 1524 Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***45 | Wheel, Assembly, 10 X 16.5, 6 Ply, Wheel, Assembly, 10 X 16.5, 6 Ply; 1524mm Wide. 1524mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-10-1 Tracks Option, Over Tyres
| 24***00 | Track, Assembly | 2 |
F3-3-1 Wheels & Tyres, 8 Stud, 31.5/1300 X 16.5, 1604 Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***67 | Wheel, Assembly, Galaxy, 31.5/1300 X 16.5; 1604mm. 1604mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre | 4 |
F3-1-18 Wheels & Tyres, 8 Stud, 10 X 16.5, 1524 Wide Track
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 24***02 | Nut, Wheel | 8 |
| 24***47 | Wheel, Assembly, 10 X 16.5, 8 Ply, Hd | 4 |
F3-2-2 Wheels & Tyres, 8 Stud, 7.00 X 15 Hd, 1372 Wide Track
| 24***02 | Nut, Wheel | 8 |
| 24***62 | Wheel, Assembly, 7.00 X 15, 14 Ply H.D.; 1372mm. 1372mm Wide Refers To The Dimension From The Outside Of Left Tyre To Outside Of Right Tyre, Wheel, Assembly, 7.00 X 15, 14 Ply H.D. | 4 |
| 41***00 | Wheel, Centre, Split | 1 |
F5-1-1 Chain, Drive, 62 Links
| 24***00 | Chain, Drive,62 Links | 4 |
F5-2-1 Chain, Drive, 64 Links
| 24***00 | Chain, Drive, 64 Links | 4 |
G Brakes
G1-1-1 Brake, Components
| 13***1Z | Bolt | 6 |
| 13***05 | Capscrew, M8 X 20 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
L Engine 100 Series, Kr Build, To M681290
L1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Kr Build
| 02***42 | Key | 1 |
| 02***16 | Gear | 1 |
| 02***23 | Washer, Thrust | 2 |
L1-2-1 Engine, Short, Kr Build
| 02***00 | Engine, Short | 1 |
L1-1-2 Engine, Complete, 2800rpm, Kr Build
| 01***00 | Engine, Complete 104.22, Nat/Asp, 2800rpm; Nla Use 01/14***31 & Modify Harness Connectors, To Suit Deutsch Switches. Not Teletruk 3d-4wd | 1 |
L1-4-10 Crankshaft, Bearings, Pistons & Con-Rods, Kr Build
| 02***42 | Key | 1 |
| 02***16 | Gear | 1 |
| 02***23 | Washer, Thrust | 2 |
L1-8-1 Engine Mountings, Kr Build
| 12***02 | Plate, Compression | 4 |
| 13***2Z | Bolt, M16 X 120 | 4 |
| 13***3Z | Nut, M16 | 4 |
L1-1-1 Engine, Complete, 2600rpm, Kr Build
| 01***00 | Engine, Complete 104.22, Nat/Asp, 2600rpm; Nla Use 01/14***32 & Modify Harness Connectors, To Deutsch Switches, Not Teletruk 3d-4ws | 1 |
L1-3-1 Block Assembly, Kr Build
| 02***02 | Plug, D=25 | 2 |
| 02***04 | Plug, D=40mm | 5 |
| 02***06 | Plug, 6.5mm | 4 |
L1-5-1 Fans, Pulleys, & Fan Belt, Kr Build
| 02***12 | Pulley, Single, D=83mm; Not Included In Assembly. Must Be Used With Spacer 02/10***13., Pulley, Single, D=83mm | 1 |
| 02***52 | Fan, Alternator | 1 |
| 02***82 | Spacer, Alternator Pulley | 1 |
L1-6-2 Timing Levers, Arms & Springs, Kr Build
| 02***96 | Nut | 3 |
| 02***07 | Circlip | 2 |
| 02***08 | Washer | 1 |
L1-6-1 Timing Case, Camshaft & Gears, Kr Build
| 02***68 | Key | 1 |
| 02***78 | Nut | 4 |
| 02***79 | O Ring | 1 |
L1-7-1 Flywheel & Housing, Kr Build
| 02***18 | Dowel | 1 |
| 02***75 | Bolt | 6 |
| 02***48 | Flywheel | 1 |
L2-4-1 Lifting Plates, Engine, Kr Build
| 02***87 | Screw | 2 |
| 02***86 | Plate, Engine Lifting | 3 |
L2-1-1 Cylinder Head, Kr Build
| 02***02 | Plug, D=25 | 6 |
| 02***42 | Seal, Inlet Valve | 4 |
| 02***43 | Spring, Valve | 8 |
L2-3-1 Rocker Cover, Kr Build
| 02***72 | Bolt | 2 |
| 02***74 | Plate | 1 |
| 02***78 | Seal | 1 |
L2-2-1 Rocker Assembly, Push Rods & Tappets, Kr Build
| 02***56 | Switch, Oil Pressure | 1 |
| 02***67 | Screw, Adjusting | 8 |
| 02***68 | Nut | 8 |
L3-2-1 Manifold, Exhaust, Kr Build
| 02***78 | Nut | 2 |
| 02***81 | Manifold, Exhaust | 1 |
| 02***82 | Gasket, Exhaust Manifold | 1 |
L3-4-1 Exhaust System, Kr Build
| 02***38 | Gasket | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
L3-3-2 Filter, Pre-Cleaner, Optional
| 58***10 | Filter, Pre-Cleaner | 1 |
L3-1-1 Manifold, Induction, Kr Build
| 02***89 | Pin | 2 |
| 02***95 | Screw | 8 |
| 02***87 | Washer | 2 |
L3-3-1 Filter, Air, Kr Build
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***3Z | Washer | 2 |
L4-1-1 Pump, Water, Kr Build
| 02***96 | Nut | 3 |
| 02***88 | Screw | 4 |
| 02***89 | Plug, D=30mm | 1 |
L4-4-1 Radiator & Hoses, Kr Build
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
| 13***1Z | Nut | 1 |
L4-3-1 Radiator, Fittings & Mountings, Kr Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 20 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
L4-2-1 Thermostat, Housing, Inlet & Outlet, Kr Build
| 02***96 | Nut | 2 |
| 02***89 | Plug, D=30mm | 1 |
| 02***62 | Screw | 2 |
L5-4-1 Filter, Oil, Kr Build
| 02***75 | Washer | 4 |
| 02***26 | Connector | 1 |
| 02***28 | Bolt, Banjo | 2 |
L5-2-1 Pump, Oil, Kr Build
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 3 |
| 02***12 | Bush | 1 |
L5-1-1 Sump, Oil, Kr Build
| 02***02 | Screw | 2 |
| 02***72 | Bolt | 1 |
| 02***97 | Screw | 30 |
L6-2-1 Injectors, Fuel, & Injection Pipes, Kr Build
| 02***96 | Nut | 3 |
| 02***14 | Damper | 6 |
| 02***15 | Screw | 3 |
L6-3-2 Fuel System, Kr Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
L6-5-1 Pump, Fuel Lift
| 02***20 | Pump, Fuel Lift | 1 |
| 02***21 | Body, Lower | 1 |
| 02***22 | Spring | 1 |
L6-4-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
L6-3-1 Fuel System, Kr Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
L6-5-2 Pump, Fuel Lift
| 02***69 | O Ring | 1 |
| 02***92 | Screw, M6x16 | 2 |
| 17***00 | Pump, Fuel Lift | 1 |
L6-1-1 Pump, Fuel Injection, & Shut-Off Solenoid, Kr Build
| 02***78 | Nut | 3 |
| 02***65 | Screw | 1 |
| 02***00 | Solenoid, Fuel Shut-Off | 1 |
L8-1-1 Gasket Sets, Kr Build
| 02***97 | Kit-Gasket | 1 |
M Engine 400 Series, Hp Build, From M681291
M1-15-3 Fans, Pulleys, & Fan Belt, Eu/Hi-Flo
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
M1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***2Z | Bolt, M16 X 120 | 4 |
| 13***3Z | Nut, M16 | 4 |
M1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Hp Build
| 02***42 | Key | 1 |
| 02***16 | Gear | 1 |
| 02***23 | Washer, Thrust | 2 |
M1-1-1 Engine, Complete, 2600rpm, Hp Build
| 01***32 | Engine, 404c-22 Complete, Nat/Aspirated, 47bhp | 1 |
| 01***81 | Engine, Complete 404c-22, 2600rpm 65 Amp | 1 |
| 01***82 | Engine, Complete 404c22, Nat/Asp 2600rpm | 1 |
M1-15-1 Fans, Pulleys, & Fan Belt, Hp Build-Usa
| 02***12 | Pulley, Single, D=83mm; Not Included In Assembly. Must Be Used With Spacer 02/10***13., Pulley, Single, D=83mm | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
M1-6-1 Timing Case, Camshaft & Gears, Hp Build
| 02***68 | Key | 1 |
| 02***78 | Nut | 4 |
| 02***79 | O Ring | 1 |
M1-15-2 Fans, Pulleys, & Fan Belt, Hp Build-Rest Of World
| 02***12 | Pulley, Single, D=83mm; Not Included In Assembly. Must Be Used With Spacer 02/10***13., Pulley, Single, D=83mm | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
M1-7-1 Flywheel & Housing, Hp Build
| 02***18 | Dowel | 1 |
| 02***08 | Washer | 1 |
| 02***34 | Washer, Spring | 2 |
M1-6-2 Timing Levers, Arms & Springs, Hp Build
| 02***96 | Nut | 1 |
| 02***07 | Circlip | 1 |
| 02***11 | Pin | 1 |
M1-5-1 Fans, Pulleys, & Fan Belt, Hp Build
| 02***12 | Pulley, Single, D=83mm; Not Included In Assembly. Must Be Used With Spacer 02/10***13., Pulley, Single, D=83mm | 1 |
| 02***52 | Fan, Alternator | 1 |
| 02***68 | Key | 1 |
M1-3-1 Block Assembly, Hp Build
| 02***06 | Plug, 6.5mm | 3 |
| 02***07 | Plug, 8.4mm | 3 |
| 02***13 | Bearing | 1 |
M1-1-2 Engine, Complete, 2800rpm, Hp Build
| 01***31 | Engine, Complete, 404c-22, Nat/Aspirated, 50bhp | 1 |
| 01***80 | Engine, Complete 404c-22, 2800rpm 65 Amp | 1 |
| 01***81 | Engine, Complete 404c22, Nat/Asp 2800rpm | 1 |
M1-5-2 Fans, Pulleys, & Fan Belt, Hp Build 65a Alternator
| 02***38 | Pulley, Alternator, D=73mm Single Groove | 1 |
| 02***68 | Key | 1 |
| 02***78 | Nut | 1 |
M2-3-1 Rocker Cover, Hp Build
| 02***73 | Breather, Gauze | 1 |
| 02***78 | Seal | 1 |
| 02***55 | Cap, Engine Oil Filler | 1 |
M2-4-1 Lifting Plates, Engine, Hp Build
| 02***12 | Screw | 3 |
| 02***52 | Plate, Engine Lifting | 2 |
M2-2-1 Rocker Assembly, Push Rods & Tappets, Hp Build
| 02***67 | Screw, Adjusting | 8 |
| 02***68 | Nut | 8 |
| 02***71 | Tappet | 8 |
M2-1-1 Cylinder Head, Hp Build
| 02***02 | Plug, D=25 | 6 |
| 02***42 | Seal, Inlet Valve | 4 |
| 02***43 | Spring, Valve | 8 |
M3-3-1 Filter, Air
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***3Z | Washer | 2 |
M3-3-2 Filter, Pre-Cleaner, Optional
| 58***10 | Filter, Pre-Cleaner | 1 |
M3-3-3 Filter, Air, Low Noise
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***3Z | Washer | 2 |
M3-4-1 Exhaust System
| 02***38 | Gasket | 1 |
| 13***7D | Setscrew, M8x25 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
M3-1-1 Manifold, Induction, Hp Build
| 02***76 | Screw | 2 |
| 02***48 | Pipe, Air Induction | 1 |
| 02***49 | Gasket | 1 |
M3-2-1 Manifold, Exhaust, Hp Build
| 02***78 | Nut | 2 |
| 02***81 | Manifold, Exhaust | 1 |
| 02***82 | Gasket, Exhaust Manifold | 1 |
M4-15-1 Fan Guard, Optional, Eu And All Hi-Flo
| 13***3D | Setscrew | 4 |
| 14***1D | Washer, Large | 4 |
| 24***15 | G.A, Fan Guard | 1 |
M4-13-2 Radiator, Fittings & Mountings, Rest Of World
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***8Z | Screw, M8x30 | 1 |
M4-13-1 Radiator, Fittings & Mountings, Usa
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
| 13***7Z | Screw, Hexagon M8 X 25 | 10 |
| 13***8Z | Screw, M8x30 | 1 |
M4-14-1 Radiator & Hoses, Usa/Rest Of World
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
| 13***1Z | Nut | 1 |
M4-13-3 Radiator, Fittings & Mountings, Eu Standard & All Hi-Flo
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3D | Setscrew | 4 |
| 13***3D | Setscrew, M8 X 16mm | 6 |
M4-14-2 Combi-Cooler & Hoses, Eu Standard & All Hi-Flo
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
M4-1-1 Pump, Water, Hp Build
| 02***96 | Nut | 3 |
| 02***88 | Screw | 4 |
| 02***89 | Plug, D=30mm | 1 |
M4-15-2 Fan Guard, Optional, Eu And All Hi-Flo
| 13***3D | Setscrew | 4 |
| 14***1D | Washer, Large | 4 |
| 24***15 | G.A, Fan Guard | 1 |
M4-3-1 Radiator, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 20 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
M4-2-1 Thermostat, Housing, Inlet & Outlet, Hp Build
| 02***96 | Nut | 2 |
| 02***89 | Plug, D=30mm | 1 |
| 02***43 | Gasket | 1 |
M4-4-1 Radiator & Hoses
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
| 13***1Z | Nut | 1 |
M5-2-1 Pump, Oil, & Relief Valve, Hp Build
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 3 |
| 02***12 | Bush | 3 |
M5-1-1 Sump, Oil, Hp Build
| 02***02 | Screw | 2 |
| 02***72 | Bolt | 1 |
| 02***97 | Screw | 30 |
M5-4-1 Filter, Oil, Hp Build
| 02***75 | Washer | 2 |
| 02***26 | Connector | 1 |
| 02***28 | Bolt, Banjo | 1 |
M6-3-1 Fuel System
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
M6-2-1 Injectors, Fuel, & Injection Pipes, Hp Build
| 02***96 | Nut | 3 |
| 02***14 | Damper | 6 |
| 02***04 | Washer, Copper | 4 |
M6-3-2 Fuel System, Electric Fuel Pump
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5D | Setscrew, M8x20 | 1 |
M6-1-1 Pump, Fuel Injection, & Shut-Off Solenoid, Hp Build
| 02***78 | Nut | 3 |
| 02***65 | Screw | 1 |
| 02***01 | Washer | 2 |
M6-4-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
M6-5-1 Pump, Fuel Lift
| 02***69 | O Ring | 1 |
| 02***92 | Screw, M6x16 | 2 |
| 17***00 | Pump, Fuel Lift | 1 |
M7-7-3 Heater, Engine Block
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***1Z | Nut | 4 |
M8-1-1 Gasket Sets, Hp Build
| 02***14 | Kit-Gasket, (0.5mm) | 1 |
| 02***15 | Kit-Gasket, (0.4mm); Refer To Service Workshop Manual. To Ensure The Correct Gasket Set Is Used, Check Cylinder Head Gasket 0.4mm Or 0.5mm., Kit-Gasket, (0.4mm), Kit-Gasket, (0.4mm); Refer To Service Workshop Manual. To Ensure The Correct Gasket Set Is Used, Check, Cylinder Head Gasket, 0.4mm Or 0.5mm., Kit-Gasket, (0.4mm); Refer To Service Workshop Manual. To Ensure The Correct Gasket Set Is Used, Check The Cylinder Head Gasket, 0.4mm Or 0.5mm ? | 1 |
ROBOT 170(WHEELED) serial number reference
Locate the machine identification plate to verify the serial number. Confirm applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 1602000 to 1604999 | JCB Robot 170 (Wheeled) - Factory Service & Shop Manual applicability | Verified in factory service manual (Pub the OEM part reference). This range covers Robot 160, 170, and 180 wheeled models. |
| 01316200 to 01317499 | JCB Robot 170 (Wheeled) - Parts Catalogue Manual applicability | Verified in factory Parts Catalogue Manual. Specific to Robot 170. |
Frequently asked questions
What engine does the JCB Robot 170 use?
The JCB Robot 170 uses JCB diesel engines, including the Eco Max 4.4-liter and 4.8-liter variants depending on the production year and configuration.
What is the operating weight of the JCB Robot 170?
The operating weight varies by configuration, ranging from approximately 2,510 kg to 6,900 kg.
What model replaced the JCB Robot 170?
The JCB Robot 170 was succeeded by the JCB 170T and subsequent compact loader models in JCB's lineup.
What ROBOT 170(WHEELED) owners discuss
What are the known powertrain and hydraulic behaviors for the JCB ROBOT 170(WHEELED)?
The machine utilizes a Perkins or Shiburo 1.9L diesel engine paired with a Sauer Danfoss MPT044 hydrostatic pump and Eaton wheel motors. The transmission provides independent control for left and right sides, allowing zero-to-maximum speed in both directions. The optional high-flow circuit delivers 115 liters/min (30.5 gal/min) to the front for high-capacity attachments. Community consensus notes that loose drive chains can hammer the motors and drive components, requiring regular tension checks to prevent premature failure of the face-mounted drive motors and side plates.
What undercarriage or wear patterns are typical for this machine type?
Wheeled models rely on floatation tires or JCB Airboss tires for arduous conditions. Common wear items include pins, bushes, and the control linkage, which users report as having lower-quality metalwork compared to competitors. The side-entry door design is noted for better access in tight spaces like gates and nets, but the loader arm visibility is non-existent when raised, limiting utility for overhead work. The single boom design has been questioned for potential twisting or cracking under heavy load over thousands of hours.
What are the engine quirks per series for the ROBOT 170(WHEELED)?
The engine oil service interval is specified at 500 hours. The machine uses fast-start glow plugs for cold weather operation. Coolant must comply with International Specification ASTM D6210. The engine is an Eco Max 4.4-liter or 4.8-liter unit depending on the year, with no DPF or exhaust aftertreatment on earlier models. Engine power varies by configuration, with sources citing 43.0 kW (57.7 HP) to 81.0 kW (108.8 HP) for later variants, while earlier models are listed at 47 hp (35 kW) or 50 HP gross.
What are common electrical or sensor issues?
The wire functions and numbers are consistent throughout the JCB range, with harness part numbers determining the printed wire codes (e.g., the OEM part reference becomes 9/371). Common electrical complaints include the overload sensor requiring adjustment and the hour meter clock failing or not working. The starter motor and battery are frequent replacement items on used units.
What is the serial number applicability for the ROBOT 170(WHEELED)?
The factory service manual covers the Robot 170 wheeled model with serial number from the OEM part reference to the OEM part reference. The Robot 170HF high-flow variant shares this serial range. Tracked models (Robot 180T) use a different serial range (from the OEM part reference to the OEM part reference) and are not applicable to the wheeled 170.
What fluids and lubricants are specified for the ROBOT 170(WHEELED)?
The machine requires JCB high-performance hydraulic oil. Engine oil changes are recommended every 500 hours. Coolant must meet ASTM D6210. Grease all pins and securing bolts with JCB Special MPL grease. The hydraulic system must be at the correct working temperature (50 °C, 122 °F) before checking fluid levels or performing fault finding.
What should be checked when buying a used ROBOT 170(WHEELED)?
Verify the drive chain tension, as loose chains cause severe damage to the face-mounted drive motors and side plates. Inspect the side plate mounting holes for fracturing or squirming, a known design weakness. Check the overload sensor calibration and hour meter functionality. Examine the pins, bushes, and control linkage for wear due to reported lower metal quality. Confirm the serial number falls within the from the OEM part reference-to the OEM part reference range for the wheeled model. Have your dealer verify the hydraulic motor condition and side plate integrity.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb ROBOT 170(WHEELED). Related factory variants of the same model family:
ROBOT-170(WHEELED)ROBOT 170ROBOT 170(WHEELED)
Need a specific ROBOT 170(WHEELED) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.