JCBagriculturalskid steer loaders (robot)
Jcb ROBOT 165
Maintenance schedule, common problems & OEM parts breakdown
The JCB Robot 165 is a compact skid steer loader manufactured from 1995 to 2000. It is powered by a Perkins 104.22 four-cylinder diesel engine producing 35 kW (47.2 HP). The machine has an operating weight of approximately 3,796 kg (8,368 lb) and a rated operating capacity of 630 kg (1,389 lb). Available in standard and high-flow (HF) configurations, the Robot 165 succeeded the earlier Robot series and was part of JCB's compact loader lineup before being replaced by the newer Robot 170 and 180 models. It features a radial lift design, 10x16.5 tires, and a transport width of 1.58 m (5.18 ft).
Across its production run, the Robot 165 remained mechanically consistent, with key updates focused on hydraulic flow rates in the HF variant and minor emissions compliance adjustments. The machine is valuable in the used and parts market because its simple Perkins engine and robust hydraulic system make it a durable workhorse for municipal, agricultural, and construction applications. Its compact size allows access to tight spaces, while the availability of shared components with the Robot 150 and 160 models keeps maintenance costs low. The Robot 165 is often sought after for its reliability and ease of repair, making it a staple in the secondary market for small-scale earthmoving and material handling.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb ROBOT 165 specifications
Engine
| Model | Perkins 104.22 |
| Gross Power | 47.2 HP (35.2 kW) |
| Net Power | 44.5 HP (33.2 kW) |
| Displacement | 135 cu in. (2216 cc) |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight (Robot 165) | 8368 lbs (3795.7 kg) |
| Operating Weight (Robot 165 HF) | 5423 lbs (2460 kg) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 114.2 in. (2.9 m) |
| Transport Width | 59.0 in. (1.58 m) |
| Transport Height | 73.3 in. (1.86 m) |
| Wheelbase / Track Gauge | Not documented for this exact serial range — verify with your dealer |
| Ground Clearance | 7.0 in. (17.7 cm) |
Performance
| Travel Speed | 11.3 km/h (7.0 mph) |
| Lifting Capacity (35% Tipping) | 950 lbs (430.9 kg) |
| Lifting Capacity (50% Tipping) | 1400 lbs (635.2 kg) |
| Lift Breakout Force | 3530 lbs (1600.5 kg) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb ROBOT 165 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the ROBOT 165 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor hydraulic oil temperature and pressure during operation to detect pump wear early. Check hydraulic tank breather cap condition every 1,000 hours to prevent contamination. Analyze engine oil for fuel dilution and soot levels, especially in high-load applications. Inspect coolant for glycol concentration and corrosion inhibitor levels annually. Check hydraulic filter differential pressure indicators to determine optimal filter change intervals. Monitor drive chain tension and lubrication to prevent premature sprocket wear.
Corrective & Common Repairs
Replace hydraulic return filter element every 250 hours to prevent valve stiction. Adjust drive chain tension regularly to avoid skipping or excessive wear on sprockets. Inspect and replace worn hydraulic hoses and fittings to prevent fluid leaks. Check and replace engine air filter element if intake restriction increases. Repair or replace worn wheel bearings and seals to maintain tire pressure and steering response. Address any hydraulic cylinder seal leaks to prevent fluid loss and contamination.
Overhaul & Rebuild Points
Overhaul hydraulic pump and motor assemblies if flow or pressure drops below specification. Rebuild engine with new piston rings, valves, and seals if compression loss or excessive oil consumption occurs. Inspect and replace drive chain and sprockets if wear exceeds limits. Rebuild hydraulic valves and servo mechanisms if control response becomes sluggish. Check and replace worn steering linkage components to restore precise machine control. Inspect and repair any cracked frame welds or structural fatigue points.
Seasonal & Environment Servicing
In cold weather, use appropriate grade engine oil and hydraulic fluid to ensure proper flow. Check battery condition and charge level frequently in winter to prevent starting issues. Inspect and clean radiator and oil cooler fins to prevent overheating in dusty environments. Use coolant with correct freeze protection for the operating climate. Lubricate all grease points more frequently in wet or muddy conditions to wash out contaminants. Store machine in a dry location to prevent electrical component corrosion.
ROBOT 165 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 817/01306 | Label, Fuel Filter | Fuel system service | Check fitment → |
| 701/16503 | Insert, Air Filter Blocked, Warning | Air intake service | Check fitment → |
| 02/900320 | Element, Oil Cartridge | Lubrication service | Check fitment → |
| 246/00652 | Filter | Scheduled service item | Check fitment → |
| 32/905501 | Element, Filter, 22 Micron | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
ROBOT 165 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| C114 | Hydraulic oil temperature sender fault | Short in wiring for the hydraulic oil temperature sender or faulty sender unit | Inspect wiring harness and connectors for damage or corrosion; check sender function |
| C157 | Sensor malfunction or communication fault in hydraulic/transmission systems | Damaged wiring harness, corroded connectors, or faulty sensor/control module | Inspect wiring harnesses and connectors; check hydraulic pressure sensors and transmission control modules |
| C414 | Sensor malfunction or communication fault in hydraulic/transmission systems | Damaged wiring harness, corroded connectors, or faulty sensor/control module | Inspect wiring harnesses and connectors; check hydraulic pressure sensors and transmission control modules |
| C692 | Reverse alarm circuit fault | Short or open circuit in reverse alarm wiring or faulty reverse alarm unit | Inspect wiring and connector pins in the reverse alarm circuit for shorts or opens; replace alarm if wiring is intact |
| 246 | Error code associated with JCB 155 Robot (specific meaning not detailed in source) | Not specified in source | Consult JCB ServiceMaster documentation or dealer scanner for specific definition |
| 546 | Error code associated with JCB 155 Robot (specific meaning not detailed in source) | Not specified in source | Consult JCB ServiceMaster documentation or dealer scanner for specific definition |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
ROBOT 165 attachments & work tools
General Purpose Buckets
Standard buckets for the JCB Robot 165 are sized at 0.37 cubic meters (0.48 cubic yards). These are the primary earthmoving tools for the machine's 2.43-ton operating weight class.
Multi-Purpose / 6-in-1 Buckets
Factory service manuals for the Robot 160/170/180 range list 6-in-1 shovels as optional attachments. These tools combine digging, grading, and material handling functions for the same machine class.
Material Handling Forks
Pallet forks are listed as a standard optional attachment in the Robot 160/170/180 service manuals. They allow the machine to handle palletized loads without a bucket.
Agricultural Forks
Manure and silage forks with top grab attachments are documented as optional equipment in the Robot 160/170/180 service manuals. These are designed for farm and livestock applications.
Quick Hitch Couplers
The JCB Robot 165 is equipped with a universal skid steer quick hitch. This mounting system allows for the connection of a wide variety of third-party and OEM attachments.
Hydraulic Circuit Options
The Robot 165 is available in standard and high-flow (HF) configurations. The high-flow option extends the machine's capability to operate more powerful hydraulic attachments.
Engine Specifications
The Robot 165 utilizes a 35 kW (47 HP) engine. Sources identify the engine manufacturer as Perkins (model 104.22) or Peugeot (XUD series) depending on the specific build and market.
Operating Capacity
The rated operating capacity for the Robot 165 is 630 kg (1,389 lbs). This capacity defines the safe working load limits for the attached work tools.
All ROBOT 165 assemblies by section
Every catalogued assembly group for the Jcb ROBOT 165. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-4-2 Shovel, Light Duty,0.57 Cu.M
| 51***62 | Sidecutter | 2 |
| 51***13 | Toeplate | 1 |
| 51***23 | Strip, Wear | 4 |
A1-3-1 Shovel, Light Duty,0.04 Cu.M
| 51***62 | Sidecutter | 2 |
| 51***79 | Strip, Wear | 4 |
| 51***82 | Toeplate | 1 |
A1-3-2 Shovel, Light Duty,0.04 Cu.M
| 51***62 | Sidecutter | 2 |
| 51***18 | Toeplate | 1 |
| 51***23 | Strip, Wear | 4 |
A1-8-3 Shovel, Heavy Duty, 0.29 Cu.M
| 51***10 | Sidecutter | 2 |
| 51***26 | Strip, Wear | 5 |
| 51***29 | Toeplate | 1 |
A1-6-1 Guard, Tooth
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 24***00 | Guard, Tooth, 1550mm | 1 |
A1-8-2 Shovel, Heavy Duty, 0.32 Cu.M
| 51***06 | Toeplate | 1 |
| 51***10 | Sidecutter | 2 |
| 51***26 | Strip, Wear | 5 |
A1-4-1 Shovel, Light Duty,0.57 Cu.M
| 51***61 | Toeplate | 1 |
| 51***62 | Sidecutter | 2 |
| 51***72 | Strip, Wear | 4 |
A1-1-1 Shovel G.P., 0.37 Cu.M
| 51***04 | Sidecutter | 2 |
| 51***92 | Toeplate, 1530mm Wide | 1 |
| 51***93 | Sidecutter | 2 |
A1-2-1 Shovel G.P., 0.29 Cu.M
| 51***04 | Sidecutter | 2 |
| 51***15 | Strip, Wear, Short | 3 |
| 51***16 | Strip, Wear, Long | 2 |
A1-5-1 Shovel G.P., 0.29 Cu.M, 1550 Wide
| 51***04 | Sidecutter | 2 |
| 51***92 | Toeplate, 1530mm Wide | 1 |
| 51***15 | Strip, Wear, Short | 3 |
A1-7-1 Tooth Options
| 13***1Z | Nut | 12 |
| 51***93 | Sidecutter, Left | 1 |
| 51***94 | Sidecutter, Right | 1 |
A1-8-1 Shovel, Heavy Duty, 0.57 Cu.M
| 51***73 | Strip, Wear | 5 |
| 51***06 | Toeplate | 1 |
| 51***10 | Sidecutter | 2 |
A2-1-1 Bucket, Standard
| 98***00 | Bucket, 200mm (8") | 1 |
| 98***00 | Bucket, 300mm (12") | 1 |
| 98***00 | Bucket, 450mm (18") | 1 |
A3-19-1 Shovel, Construction, Demolition
| 98***02 | Shovel, Construction, 1600mm | 1 |
A3-9-4 Sweeper Collector, Hydraulic Circuit, For 980/16000
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 16***04 | Adapter, Male/Male | 4 |
A3-15-2 Patch Planer
| 13***9Z | Bolt, M10x90mm | 2 |
| 14***16 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
A3-3-2 Earth Drill, Gearbox
| 98***03 | Housing, Output | 1 |
| 98***04 | Shaft, Output | 1 |
| 98***05 | Cover, End | 1 |
A3-6-1 Carriage Load Guard
| 13***4Z | Bolt, M10x60 | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
A3-9-3 Sweeper Collector, Hydraulic Circuit, For 980/16000 Superseded By A3-9-4
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 16***04 | Adapter, Male/Male | 4 |
A3-12-6 Shovel, Clam, 6 In 1
| 13***4Z | Bolt, M10x60 | 6 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 6 |
A3-11-11 Trencher, Kit, X14 Xr-14, 6" Wide-36" Depth
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
A3-7-2 Fork, Manure & Silage
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***05 | Adapter | 2 |
| 45***00 | Coupling, 3/4 Bsp, Female, Quick Release Type A | 2 |
A3-10-2 Sweeper Hydraulics, And Drive Chain, For 980/15900
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 13 |
| 13***8Z | Bolt, M10 X 30 | 2 |
A3-11-21 Trencher, Abi, X21 Xr-21, 6" Wide - 48" Depth
| 33***59 | Cover, Motor | 1 |
| 33***61 | Adapter, Motor To Hose | 2 |
| 33***63 | Sprocket, Motor, Includes Keys | 1 |
A3-14-1 Toeplate, Bolt On, 1430mm
| 13***1Z | Nut | 5 |
| 14***2Z | Washer | 5 |
| 51***96 | Toeplate, 1430mm | 1 |
A3-13-1 Attachment Backhoe, Boom And Dipper
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 13***2Z | Nut, M12 | 0 |
A3-12-1 Shovel, Clam, 6 In 1
| 13***4Z | Bolt, M10x60 | 6 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A3-11-12 Trencher, Kit, X21 Xr-21, 6" Wide-48" Depth
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 2 |
A3-3-1 Earth Drill
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, M16 | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A3-2-2 Attachments Frame
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 23***06 | Bush | 4 |
| 98***00 | Frame, Attachments | 1 |
A3-3-3 Earthdrill, Dm1200, From 08/2007
| 98***94 | Kit, Drillmaster 1200, Auger | 1 |
A3-13-0 Attachment Backhoe
| 24***56 | Bracket | 2 |
| 98***00 | Attachment, Backhoe | 1 |
| 98***00 | Attachment, Backhoe, With Auxiliary. Circuit | 1 |
A3-5-1 Fork Carrier
| 13***2Z | Bolt, M12 X 50mm | 2 |
| 13***3Z | Nut, M12 | 2 |
| 51***00 | Carrier, Fork | 1 |
A3-13-4 Backhoe Attachment, Securing Kit
| 13***6Z | Bolt, M12 X 70mm | 1 |
| 13***8Z | Bolt, M12 X 80mm | 1 |
| 13***3Z | Nut, M12 | 2 |
A3-14-2 Toeplate, Bolt On, 1580mm
| 13***1Z | Nut | 5 |
| 14***2Z | Washer | 5 |
| 51***97 | Toeplate, 1580mm | 1 |
A3-15-4 Patch Planer
| 13***0Z | Bolt, M16 X 40mm | 5 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
A3-20-1 Shovel, Poultry/Litter
| 98***03 | Shovel, Poultry/Litter, 1680mm | 1 |
A3-2-1 Attachments Frame
| 23***06 | Bush | 4 |
| 98***00 | Frame, Attachments | 1 |
A3-17-1 Shovel, Low Back
| 98***00 | Shovel, Low Back, 1580mm | 1 |
A3-12-5 Shovel, Clam, 6 In 1, 0.28cu.M
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***8Z | Bolt, M10x80 | 2 |
A3-1-1 Quickhitch
| 12***06 | Bush, Spring Steel | 4 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***9Z | Bolt | 1 |
A3-9-1 Sweeper Collector, Bucket & Shroud, Assembly,980/16000
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***9Z | Bolt, M8 X 35mm | 12 |
| 13***1Z | Bolt, M8 X 45 | 4 |
A3-16-1 Shovel, Sidetip
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
A3-12-4 Shovel, Clam, 6 In 1
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***5Z | Bolt | 2 |
A3-13-3 Controls, Backhoe Attachment
| 13***3Z | Screw, M6x16 | 4 |
| 13***2Z | Nut, M8 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
A3-11-10 Trencher, Kit, X14 Xr-14, 6" Wide-36" Depth
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***09 | Adapter, Reducing | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
A3-13-2 Attachment Backhoe, Mainframe, And Related Parts
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
A3-11-20 Trencher, Abi, X14 Xr-14, 6" Wide - 36" Depth
| 33***59 | Cover, Motor | 1 |
| 33***61 | Adapter, Motor To Hose | 2 |
| 33***63 | Sprocket, Motor, Includes Keys | 1 |
A3-11-6 Trencher, Decals
| 81***42 | Decal, Warning, Before Operating | 1 |
| 81***75 | Decal, "Jcb"Trencher | 2 |
| 81***02 | Decal, Caution,No Step | 1 |
A3-15-3 Patch Planer
| 98***02 | Kit-Seal, Ram | 1 |
| 98***00 | Attachment, Patch Planer | 1 |
A3-15-1 Patch Planer
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***8Z | Capscrew | 6 |
| 14***16 | Seal, Bonded | 1 |
A3-12-3 Shovel, Clam, 6 In 1
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***5Z | Bolt | 2 |
A3-12-2 Shovel, Clam, 6 In 1
| 13***4Z | Bolt, M10x60 | 6 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A3-11-2 Trencher 980/15600, Frame & Components
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***6Z | Bolt | 1 |
| 13***3Z | Nut, Lock, M10 | 7 |
A3-4-1 Earth Drill, Attachments
| 13***4Z | Bolt | 3 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
A3-8-1 Breaker, Hammermaster 160q
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
| 16***09 | Adapter, Reducing | 2 |
A3-7-1 Fork, Manure & Silage
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***05 | Adapter | 2 |
| 45***00 | Coupling, 3/4 Bsp, Female, Quick Release Type A | 2 |
A3-9-2 Sweeper Collector, Brush Assembly, For 980/16000
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
A3-1-0 Attachments
A3-10-1 Sweeper Assembly, 980/15900
| 13***7Z | Bolt, M10x25 | 14 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 16 |
A3-18-1 Shovel, Low Back Digging
| 13***1Z | Nut | 16 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 8 |
| 82***12 | Ploughbolt, 35mm | 16 |
A3-11-1 Trencher 980/15600, Digging Chain
| 13***8Z | Bolt | 0 |
| 13***3Z | Nut | 0 |
| 98***00 | Attachment, Trencher | 1 |
A3-11-30 Trench Cleaner Kits, Components
| 33***07 | Arm, Trencher, Cleaner | 1 |
| 33***10 | Kit, Linkage Assembly, 9 Inch | 1 |
| 33***13 | Kit, Linkage Assembly, 11 Inch | 1 |
B Bodywork, Cab, Loader End
B1-1-1 Chassis & Fittings
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
B1-12-1 Floorplates & Mat
| 24***27 | Plate, Foot | 1 |
| 24***72 | Floormat | 1 |
| 24***07 | Plate, Foot, Left Side | 1 |
B1-9-1 Guard, Screen
| 24***77 | Knob | 2 |
| 24***00 | Guard, Screen | 1 |
B1-3-2 Cover, Engine
| 24***00 | Stay, Engine Cover | 1 |
| 24***00 | Cover, Engine | 1 |
| 81***49 | Spring, Left Hand | 1 |
B1-3-3 Cover, Engine
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 24***29 | Stay, Engine Cover | 1 |
B1-2-4 Door, Rear
| 13***08 | Bolt | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
B1-2-2 Door, Rear
| 12***01 | Strap | 2 |
| 13***9Z | Bolt | 3 |
| 13***2Z | Screw, M6 X 50 | 1 |
B1-10-1 Valve Mounting, High Flow
| 13***5Z | Bolt | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 4 |
B1-2-1 Door, Rear
| 12***01 | Strap | 1 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***0Z | Bolt, M12x40 | 2 |
B1-8-1 Guard,Frame, Rear Door
| 13***3Z | Bolt, M24 130 | 2 |
| 13***3Z | Nut | 2 |
| 14***4Z | Washer | 2 |
B1-2-3 Door, Rear
| 12***01 | Strap | 2 |
| 13***9Z | Bolt | 3 |
| 13***2Z | Screw, M6 X 50 | 1 |
B1-5-1 Chassis, Fuel & Hydraulic, Tanks
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
| 12***39 | Strainer, Fuel, Gauze | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 2 |
B1-3-1 Cover, Engine
| 13***3Z | Screw, M8 X 16 | 4 |
| 24***29 | Grille | 1 |
| 24***00 | Cover, Engine | 1 |
B1-11-1 Soundproofing
| 24***86 | Panel, Soundproof, Tank Right Hand Side | 1 |
| 24***88 | Panel, Soundproof, Tank Left Hand Side | 1 |
| 24***90 | Panel, Soundproof, Chaincase L.H. Side | 1 |
B1-4-1 Step, Cab Access
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
B1-6-1 Breather, Hydraulic Tank, Service Option
| 13***2Z | Nut | 1 |
| 24***56 | Bracket | 1 |
| 64***00 | Tube, Feet | 0 |
B1-7-1 Guard, Rear Door
| 13***8Z | Screw, M8x30 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-10-1 Seat, Fabric
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***02 | Kit-Seat Foam, Back | 1 |
B2-15-1 Mirror, Cab Mounted
| 12***00 | Mirror, With Bracket | 1 |
| 12***01 | Bracket | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-14-2 Window, Sliding, Tinted Glass
| 92***00 | Window, Sliding, Tinted | 1 |
B2-12-1 Seat Belt
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B2-11-1 Seat, Basic
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***07 | Kit-Slide Rail | 1 |
B2-2-8 Screen, Polycarbonate, Canopy
| 14***6Z | Washer, Spring | 2 |
| 24***56 | Windscreen, Polycarbonate | 1 |
| 24***57 | Windscreen, Polycarbonate | 1 |
B2-6-1 Covers, Instrument Surround
| 13***3Z | Screw, M6x16 | 2 |
| 14***04 | Screw, 10-32x3/4"Unf, Countersunk | 4 |
| 24***84 | Panel, Instrument, Optional | 1 |
B2-3-1 Door, Cab
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 1 |
| 12***08 | Bush, Hinge | 2 |
B2-9-1 Seat, Vinyl
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***00 | Seat, Pvc Trim, Bostrom 'U1'Low Back | 1 |
B2-2-5 Screens, Left And Right, Canopy
| 13***3Z | Nut, Self Lock, M6 | 19 |
| 14***1Z | Washer | 19 |
| 24***73 | Screen, Polycarbonate | 1 |
B2-16-1 Lever Lock, Loader Valve, Straight Lever
| 24***09 | Lock, Control | 1 |
| 24***00 | Tube, Pivot | 2 |
| 82***74 | Clip | 1 |
B2-5-1 Restraint
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***5Z | Bolt | 16 |
| 13***3Z | Screw, M8 X 16 | 6 |
B2-14-1 Window, Sliding, Clear Glass
| 92***00 | Window, Sliding | 1 |
| 92***00 | Window, Sliding | 1 |
| 92***01 | Window, Sliding | 1 |
B2-13-1 Roof Lining
| 24***66 | Lining, Roof | 1 |
| 82***08 | Retainer, Insulation | 2 |
B2-18-1 Visor, Sun
| 24***00 | Blind, Roller | 1 |
| 82***87 | Screw | 4 |
B2-7-1 Cab Glazing, Rear
| 15***01 | Ring, Key 38mm Diameter, Approx | 1 |
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 82***06 | Strip, Filler | 0 |
B2-2-1 Cab Glazing
| 14***6Z | Washer, Spring | 3 |
| 24***77 | Knob | 2 |
| 24***00 | Clamp, Bracket | 2 |
B2-6-2 Covers, Instrument Surround
| 14***04 | Screw, 10-32x3/4"Unf, Countersunk | 4 |
| 24***85 | Panel, Fuse & Relay Cover; Use 24***21 San 07748 Pi 246/541 | 1 |
| 24***18 | Guard, Harness | 1 |
B2-4-1 Door, Canopy
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 1 |
| 12***08 | Bush, Hinge | 2 |
B2-2-7 Cab Glazing, Polycarbonate
| 14***6Z | Washer, Spring | 2 |
| 24***56 | Windscreen, Polycarbonate | 1 |
| 24***77 | Knob | 2 |
B2-8-1 Handbook Case
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 15***01 | Holder, Handbook | 1 |
B2-2-6 Cab Glazing
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 14***6Z | Washer, Spring | 4 |
B2-2-2 Cab Glazing, Polycarbonate
| 14***6Z | Washer, Spring | 2 |
| 24***56 | Windscreen, Polycarbonate | 1 |
| 24***77 | Knob | 2 |
B2-17-1 Mirror, Interior
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 14***03 | Screw | 2 |
| 24***95 | Plate | 1 |
B2-2-4 Half Screen, Polycarbonate, Canopy
| 14***6Z | Washer, Spring | 2 |
| 14***02 | Screw, No.10 X 1/2" Long | 3 |
| 24***23 | Screen, Polycarbonate | 1 |
B2-2-3 Screen, Polycarbonate, Canopy
| 14***6Z | Washer, Spring | 2 |
| 24***56 | Windscreen, Polycarbonate | 1 |
| 24***57 | Windscreen, Polycarbonate | 1 |
B3-4-1 Safety Strut
| 12***02 | Stop | 1 |
| 14***57 | Strap | 1 |
| 14***00 | Strut, Travel, 654mm Long | 1 |
B3-1-1 Arm, Loader
| 12***06 | Bush, Spring Steel | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 5 |
| 13***0Z | Bolt, M10 X 100 | 1 |
B3-2-1 Tipping Levers
| 12***06 | Bush, Spring Steel | 4 |
| 13***4Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B3-3-1 Compensating Ram, Installation
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
| 13***0Z | Bolt, M10 X 100 | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
B3-1-2 Arm, Loader
| 12***06 | Bush, Spring Steel | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 5 |
| 13***0Z | Bolt, M10 X 100 | 1 |
B3-5-1 Travel Restraint, Shovel
| 24***00 | Link, Travel, Shovel | 1 |
| 82***12 | Pin, Lynch | 1 |
| 82***71 | Pin, Linch, 47mm Dia | 1 |
B3-1-3 Arm, Loader
| 12***06 | Bush, Spring Steel | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 5 |
| 13***0Z | Bolt, M10 X 100 | 1 |
B5-7-1 Labels, Attachments
| 81***41 | Decal, "Compactor" | 1 |
| 81***43 | Decal, Hammermaster Jcb160q | 1 |
| 81***44 | Decal, "Road Sweeper" | 1 |
B5-5-1 Paint
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 1 |
| 42***05 | Paint, Gloss Yellow, 2.5 Lts | 1 |
B5-10-1 Fire Extinguisher
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
| 82***88 | Screw, Countersunk, M6 X 25 | 2 |
| 82***68 | Rivet, Nut | 2 |
B5-10-2 Fire Extinguisher, 2.5kg
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
| 82***88 | Screw, Countersunk, M6 X 25 | 2 |
| 82***68 | Rivet, Nut | 2 |
B5-1-3 Decals
| 81***87 | Decal, Tie Down (Chain) | 4 |
| 81***06 | Label, Fuel Filter | 1 |
| 81***77 | Label, Read Handbook | 1 |
B5-8-1 Labels, Finnish
| 81***42 | Label, Warning Finnish, Read Operating Book | 1 |
| 81***36 | Label, Instruction, Safety Strut,Finnish | 1 |
| 81***37 | Label, Loader Arm Danger, Finnish | 1 |
B5-9-1 Decal, 50 Year
| 99***20 | Decal, 50 Years, For Cab Machines | 1 |
| 99***21 | Decal, 50 Years, For Canopy Machines | 1 |
B5-1-2 Decals
| 81***54 | Decal, Jcb | 1 |
| 81***59 | Decal, 'Robot' | 1 |
| 81***45 | Decal, 'Jcb' Right Side, Grey Background | 1 |
B5-6-1 Labels, Dutch
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***91 | Label, Danger, Loader Arm, Dutch | 1 |
| 81***93 | Label, Engine Oil Run In, Dutch | 1 |
B5-2-1 Labels, German
| 81***44 | Label, Warning German, Read Operating Book | 1 |
| 81***60 | Label, Hi-Lite | 1 |
| 81***37 | Decal, Grease Points | 14 |
B5-1-1 Decals
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-3-1 Tool Kit
| 12***01 | Strap | 2 |
| 27***00 | Bag, Tool | 1 |
| 40***12 | Grease, Cartridge 400g | 1 |
B5-1-4 Decals
| 81***95 | Decal, Warning, Disconnect Battery | 1 |
| 81***97 | Label, Danger, Fluid Under Pressure | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
B5-2-3 Labels, Italian
| 81***45 | Label, Warning Italian, Read Operating Book | 1 |
| 81***60 | Label, Hi-Lite | 1 |
| 81***46 | Label, Danger, Loader Arm, Italian | 1 |
B6-1-1 Homologation Parts, Germany
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Nut | 4 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
C Electrics-Machine, Cab & Engine
C1-1-1 Harness'S, Cab
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 4 |
| 71***00 | Wire, Link | 1 |
| 71***00 | Harness, Front Roof | 1 |
C1-2-3 Harness'S, Canopy, German & Italian
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 4 |
| 71***00 | Wire, Link | 1 |
| 71***00 | Harness, Mainframe | 1 |
C1-21-1 Harness, Patch Planer
| 70***64 | Insert, Auxiliary Hydraulics | 1 |
| 70***00 | Switch | 1 |
| 72***58 | Bulb, 12v, 1.2w; Cwe,Then 70***01 Bulb San5622 17/5/95 Gk | 1 |
C1-18-1 Harness, High Flow
| 71***00 | Harness, High Flow | 1 |
C1-14-1 Light, Number Plate, Italy
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 8 |
C1-7-2 Light, Beacon, Hazard Warning, Italian
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Magnetic, (Yellow) | 1 |
| 70***01 | Lens, Yellow | 1 |
C1-5-2 Battery & Isolator, Optional
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-10-1 Installation, Reverse Alarm, Optional
| 13***2Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut | 1 |
C1-20-1 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Junior Timer Sealed, Socket Ho. Amp 2-Way | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
C1-11-1 Harness, Float Installation
| 71***00 | Relay, Green; Push Power. Qty Has Been Reduced To One Off From M406613, Relay, Green; Front Work Lights (Was 71***00). 71***00 Can Be Used To Relpace The Blue Relays That May Have Been Fitted To Early M/C'S, Relay, Green, Relay, Green; Push Power. Relay Mounting Is Bolted To The Hand Brake Mounting Bracket., Relay, Green; Work Lights, Italian, German Requirement Only. Not Fitted Or Required For Usa Machines., Relay, Green; Work Lights, Italian Germam Reqiurement Only. Not Fitted Or Reqiured On Usa Machines. | 1 |
| 71***00 | Harness, Float Installation | 1 |
| 71***00 | Harness, Float Installation | 1 |
C1-8-1 Horn, Single Tone
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
| 14***2Z | Washer | 1 |
C1-13-3 Light, Head, Left Hand Dip, Clear
| 26***00 | Headlight, L/H. Dip, 12 Volt, Clear | 1 |
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
C1-16-1 Harness, Head Light
| 71***00 | Harness, Headlight | 1 |
| 72***73 | Harness, Headlight, (Front Roof) | 1 |
C1-19-1 Switch, Brake Light Timer
| 13***3Z | Nut | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 1 |
| 14***1Z | Washer, 2 Ba | 2 |
C1-17-1 Harness, Headlight, Italian
| 71***00 | Harness, Dip Beam | 1 |
| 71***00 | Harness, Headlight, Italian | 1 |
C1-5-1 Battery
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***14 | Clamp, Battery | 1 |
C1-13-1 Light, Head, Right Hand Dip
| 24***13 | Grommet, 32mm Dia | 2 |
| 70***00 | Light, Unit, Right Hand Dip | 2 |
| 70***00 | Body, Headlight | 2 |
C1-3-1 Light, Working, Front
| 70***01 | Lens | 1 |
| 70***02 | Harness | 1 |
| 70***00 | Light, Working | 2 |
C1-10-2 Installation, Reverse Alarm, Optional
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***11 | Seal, Bonded | 6 |
C1-1-3 Harness'S, Cab,German & Italian
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 4 |
| 71***00 | Wire, Link | 1 |
| 71***00 | Harness, Mainframe | 1 |
C1-7-1 Light, Beacon, Hazard Warning, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***00 | Beacon, Magnetic, (Amber) 12 Volt, Beacon, Magnetic, (Amber) 12 Volt; See Note 1. Belt Driven | 1 |
C1-12-1 Light, Number Plate
| 70***00 | Light, Number Plate | 1 |
| 71***00 | Harness, Extention | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C1-2-1 Harness'S, Canopy
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 4 |
| 24***00 | Timer | 1 |
| 71***00 | Timer | 1 |
C1-4-1 Light, Working, Rear
| 70***01 | Lens | 1 |
| 70***02 | Harness | 1 |
| 70***00 | Light, Working | 1 |
C1-6-1 Light, Rear
| 14***03 | Screw, Self Tapping | 2 |
| 24***55 | Bracket | 2 |
| 70***00 | Lens; Replaced By Mss Use 70***00 3 Pin Or, 70***00 4 Pin. See San03938 | 1 |
C1-15-1 Light, Combination, Front
| 24***14 | Bracket | 2 |
| 70***00 | Light, Front Combination | 2 |
| 70***01 | Lens, Amber/White | 1 |
C1-9-1 Switches, Electrical
| 13***3Z | Nut | 4 |
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 2 |
C1-13-2 Light, Head, Right Hand Dip
| 26***00 | Headlight, R/H. Dip, 12 Volt, Clear | 1 |
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
C1-19-3 Switch, Hydraulic Oil Temp.
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 24***08 | O Ring | 1 |
| 70***00 | Switch, Temperature | 1 |
C2-3-3 Alternator, (Valeo)
| 71***01 | Regulator | 1 |
| 71***02 | Rotor, Assembly | 1 |
| 71***03 | Stator, Assembly | 1 |
C2-5-2 Motor, Starter
| 71***00 | Motor, Starter | 1 |
| 71***01 | Armature | 1 |
| 71***02 | Coil, Field | 1 |
C2-5-1 Motor, Starter
| 02***75 | Plug | 1 |
| 02***13 | Nut | 2 |
| 02***60 | Washer | 2 |
C2-4-1 Alternator Mountings
| 02***73 | Adjuster | 1 |
| 02***74 | Lever, Alternator Adjusting | 1 |
| 02***13 | Nut | 2 |
C2-3-1 Alternator
| 71***00 | Alternator, Assembly; Type Bosch Or Valeo. For Service Parts, Check Alternator Type And Refer To Section Index., Alternator, Assembly | 1 |
C2-3-2 Alternator, (Bosch)
| 17***16 | Nut | 1 |
| 71***21 | Bracket, Drive End | 1 |
| 71***22 | Bearing, Drive End | 1 |
C2-1-1 Electrical Equipment
| 02***23 | Sender, Low Water Level; This Switch Function Is Now Deleted From From, Expansion Tank, Replace With Plug 02/90***45. | 1 |
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Water Temperature | 1 |
C3-1-1 Switches, Warning Lights
| 13***5Z | Bolt | 3 |
| 14***6Z | Washer, M6 | 3 |
| 14***5Z | Screw | 1 |
C3-3-2 Heater, Installation
| 13***5Z | Bolt | 8 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***04 | Nut | 2 |
C3-4-1 Switch & Console, Hydraulic Float
| 24***11 | Cover, Throttle | 1 |
| 70***87 | Decal, Hydraulic Float | 1 |
| 70***00 | Switch | 1 |
C3-3-1 Heater, Installation
| 12***01 | Tap | 1 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut | 2 |
C3-6-1 Switch Inserts
| 70***08 | Insert, Symbol | 1 |
| 70***24 | Insert, Rear Horn | 1 |
| 70***26 | Insert, Wash/Wipe | 1 |
C3-2-1 Wash/Wipe, Front Screen
| 12***00 | Pump, And Reservoir; Replaced By 25***00, See San07699, Single Pump Type. Refer To Page C3-3-1 For Machines Not Fitted With Non Return Valve At Base Of Bottle., Pump, And Reservoir; Replaced By 25***00, See San07699 | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 5 |
C3-5-1 Switch & Console, High Flow
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 24***11 | Cover, Throttle | 1 |
D Controls-Machine, Engine & Steering
D1-1-1 Control, Speed Restrictor
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
D2-1-1 Control, Throttle, Hand And Foot
| 02***51 | Link, Lever | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
D2-2-1 Control, Hand Throttle, Standard
| 02***51 | Link, Lever | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 6 |
D2-1-2 Control, Throttle, Hand And Foot
| 02***51 | Link, Lever | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
D2-1-4 Control, Throttle, Hand And Foot
| 13***7Z | Screw, M6 X 25mm Long | 3 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
D2-1-5 Control, Throttle, Hand And Foot, High Flow
| 13***7Z | Screw, M6 X 25mm Long | 3 |
| 13***1Z | Bolt | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
D2-2-2 Control, Hand Throttle, High Flow
| 02***51 | Link, Lever | 1 |
| 13***1Z | Bolt | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
D2-1-3 Control, Throttle, Hand And Foot, High Flow
| 02***51 | Link, Lever | 1 |
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E Hydraulics Including Steering
E1-9-1 Circuit, Hydraulic Float
| 16***02 | Adapter | 3 |
| 25***00 | Valve, Solenoid Operated | 1 |
| 61***00 | Hose, 1/4bspx400; See Note 1. Also On M/C'S M770047/57/60/61, Hose, 1/4bspx400; See Note 1. Also On M/C'S M770049/51/54/59/63, Hose, 1/4bspx400, Hose, 1/4bspx400; See Note 1. Also On M/C'S M770048/50/56/58/62/64 | 3 |
E1-15-2 Circuit, High Flow
| 13***8Z | Screw, M8x30 | 1 |
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-10-2 Circuit, Hydraclamp, Auxilliary Pipework Version
| 14***08 | Seal, Washer | 4 |
| 14***11 | Seal, Bonded | 11 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-12-1 Circuit, Stabiliser
| 13***3Z | Screw, M6x16 | 3 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***6Z | Washer, Spring | 3 |
E1-3-1 Circuit, Loader
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***18 | Capscrew, M6 X 80mm Long | 2 |
| 14***6Z | Washer, M6 | 1 |
E1-14-1 Circuit, Dipper
| 14***15 | Washer, Seal; Replaces Khj0891 | 3 |
| 16***03 | Adapter, Male/Male | 2 |
| 98***56 | Hose | 1 |
E1-4-1 Circuit, Loader Arm
| 13***7Z | Screw, M6 X 25mm Long | 3 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Screw, M8x30 | 7 |
E1-6-1 Oil Cooler, Installation
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 24***78 | Pad, Rubber | 1 |
E1-2-1 Circuit, Drive
| 13***2Z | Bolt | 1 |
| 14***11 | Seal, Bonded | 12 |
| 16***02 | Adapter, 1/4" Bsp M/M | 8 |
E1-8-1 Circuit, Hand Held Attachment
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
E1-2-2 Circuit, Drive
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***02 | Adapter | 13 |
| 16***03 | Adapter | 7 |
E1-7-1 Circuit, Low Pressure Return
| 13***8Z | Screw, M8x30 | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-11-1 Circuit, Slew
| 14***11 | Seal, Bonded | 5 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 5 |
E1-16-1 Circuit, Patch Planer
| 14***11 | Seal, Bonded | 9 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
E1-2-3 Circuit, Servo, Transmission
| 14***02 | Washer | 1 |
| 14***11 | Seal, Bonded | 7 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
E1-5-1 Circuit, Auxiliary
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-1-2 Circuit, Neutral
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-10-1 Circuit, Hydraclamp
| 14***08 | Seal, Washer | 4 |
| 14***11 | Seal, Bonded | 11 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-4-2 Circuit, Loader Arm
| 13***7Z | Screw, M6 X 25mm Long | 3 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Screw, M8x30 | 7 |
E1-13-1 Circuit, Boom
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 98***58 | Hose | 2 |
E1-15-1 Circuit, High Flow
| 13***8Z | Screw, M8x30 | 1 |
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-1-1 Circuit, Neutral
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***06 | Adapter, 3/4" Bsp M/M | 3 |
| 16***10 | Adapter, Includes 'O'Ring | 4 |
E1-7-2 Valve, Diverter
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 16***16 | Adapter | 1 |
| 25***00 | Valve, Diverter | 1 |
E2-4-1 Pump, Main Hydraulic
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***9Z | Washer | 2 |
| 20***00 | Std Flow Hydrostatic, Single Gear Pump; Mss To 20/20***00 1-Off + 20/20***00 1-Off See, San 14226 | 1 |
E2-6-1 Pump, Gear
| 20***00 | Pump, Single Std Flow | 1 |
| 20***01 | Kit-Seal | 1 |
| 20***85 | Pump, Single, Std. Flow | 1 |
E2-1-6 Motor, Drive
| 13***03 | Bolt | 12 |
| 13***09 | Capscrew | 8 |
| 20***04 | Bearing | 1 |
E2-7-1 Pump, Gear, High Flow
| 20***00 | Pump, Tandom 'High Flow' | 1 |
| 20***01 | Kit-Seal | 1 |
E2-1-5 Motor, Drive
| 13***03 | Bolt | 12 |
| 13***09 | Capscrew | 8 |
| 20***00 | Motor, Drive, Stamped L.H., Colour Code Red; Right Side. M10 Mountings. Motor Part Nos. Are Shared With Robot M/Cs. Id Plate Stamping Refers To The Robot Fitment., Motor, Drive, Stamped L.H., Colour Code Red | 1 |
E2-5-7 Pump Assembly, Hydrostatic(On Hold), Rear Section
| 20***01 | Kit-Seal, Hydrostatic Pump, 'For Whole Pump' | 1 |
| 20***03 | Plate, Thrust | 1 |
| 20***04 | Cylinder, Block Assembly | 1 |
E2-5-1 Pump Assembly, Hydrostatic
| 20***01 | Kit-Seal, Hydrostatic Pump, 'For Whole Pump' | 1 |
| 20***02 | Housing, Front Pump | 1 |
| 20***18 | Plug | 1 |
E2-3-2 Chain, Drive
| 24***00 | Chain, Drive, 64 Links | 4 |
| 45***01 | Cap, Breather, Metal, 5mm Hole; Replaced By 45***01, See San05945 | 2 |
E2-2-2 Chain, Drive
| 24***00 | Chain, Drive,62 Links | 4 |
| 45***01 | Cap, Breather, Metal, 5mm Hole; Replaced By 45***01, See San05945 | 2 |
E2-2-1 Chain, Drive
| 24***00 | Chain, Drive, 66 Links | 4 |
| 45***01 | Cap, Breather, Metal, 5mm Hole; Replaced By 45***01, See San05945 | 2 |
E2-3-1 Chain, Drive
| 24***00 | Chain, Drive, 68 Links | 4 |
| 45***01 | Cap, Breather, Metal, 5mm Hole; Replaced By 45***01, See San05945 | 2 |
E2-4-2 Pump, Main Hydraulic
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***9Z | Washer | 2 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 2 |
E2-5-2 Pump, Hydrostatic, Components
| 20***00 | Pump, Hydrostatic; Use 20/20***00 Std, Or 20/20***00 Hi-Flow M/C'S | 1 |
| 20***01 | Kit-Seal, Hydrostatic Pump, 'For Whole Pump' | 1 |
| 20***23 | Shaft | 1 |
E2-1-4 Motor, Drive, High Ambient
| 13***09 | Capscrew | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
E2-1-2 Motor, Drive
| 13***14 | Screw, Cap | 8 |
| 13***09 | Capscrew | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E2-5-5 Pump Assembly, Hydrostatic(On Hold), Centre Sections
| 20***01 | Kit-Seal, Hydrostatic Pump, 'For Whole Pump' | 1 |
| 20***14 | Bearing, Needle | 2 |
| 20***16 | Pin | 2 |
E2-1-1 Motor, Drive
| 13***14 | Screw, Cap | 8 |
| 13***09 | Capscrew | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E2-5-3 Pump Assembly, Hydrostatic(On Hold), Front Section
| 20***01 | Kit-Seal, Hydrostatic Pump, 'For Whole Pump' | 1 |
| 20***02 | Housing, Front Pump | 1 |
| 20***03 | Plate, Thrust | 1 |
E3-1-2 Valve Mounting
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***36 | Mounting, Bonded | 6 |
E3-14-2 Valve, Brake Pressure
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***18 | Capscrew, M6 X 80mm Long | 2 |
| 25***00 | Valve, Pressure Reducing, Valve, Pressure Reducing; See Also E3-14-2. 25/10***00 Has Different Connections Than Those Shown, Please See E3-14-2 | 1 |
E3-2-1 Valve, Components
| 25***16 | O Ring | 1 |
| 25***12 | O Ring, Interface, Valve Sections | 0 |
| 25***22 | Plug, Assembly | 1 |
E3-10-2 Filter, Hydraulic
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
E3-8-1 Valve, Control, Loader, Right Hand
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 25***00 | Lever, Loader Joystick | 1 |
E3-7-1 Valve, Control, Transmission, Left Hand
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 25***02 | Flange, & Joint Assembly | 1 |
E3-2-2 Valve, Components
| 25***16 | O Ring | 1 |
| 25***12 | O Ring, Interface, Valve Sections | 0 |
| 25***22 | Plug, Assembly | 1 |
E3-2-3 Valve, Components
| 25***16 | O Ring | 1 |
| 25***12 | O Ring, Interface, Valve Sections | 0 |
| 25***19 | Kit-Seal, Relief Valve | 1 |
E3-20-1 Valve, Control, Excavator, 6 Spool
| 25***12 | Bush | 1 |
| 98***01 | Valve, 6 Spool | 1 |
| 98***02 | Valve, Cartridge | 4 |
E3-14-1 Valve, Brake Pressure
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***18 | Capscrew, M6 X 80mm Long | 2 |
| 25***00 | Valve, Brake And, Pressure Reducing | 1 |
E3-3-1 Valve, Section
| 25***06 | O Ring | 4 |
| 25***07 | Capscrew | 8 |
| 25***08 | Cap, Detent | 4 |
E3-21-1 Valve, Control, Excavator, 7 Spool
| 98***02 | Valve, Cartridge | 4 |
| 98***03 | Valve, Anti Cavitation | 2 |
| 98***04 | Cover, Outlet | 1 |
E3-10-1 Filter, Hydraulic
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
E3-11-1 Valve, High Flow
| 13***4Z | Bolt, M10x60 | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***36 | Mounting, Bonded | 3 |
E3-1-1 Valve Mounting
| 13***2Z | Bolt | 3 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E4-5-1 Ram, Compensating
| 12***06 | Bush, Spring Steel | 1 |
| 12***15 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-6-1 Ram, Compensating
| 12***06 | Bush, Spring Steel | 1 |
| 12***15 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-16-1 Ram, Slew/Swing
| 14***03 | Nipple, Grease | 1 |
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
E4-13-1 Ram, Dipper
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***01 | Head, Piston | 1 |
E4-12-1 Ram, Boom
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***00 | Ram, Boom | 1 |
E4-8-1 Ram, Manure & Silage
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-7-2 Ram, Clamshovel
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***06 | O Ring | 1 |
E4-1-1 Ram, Crowd
| 12***15 | Bush, Spring | 1 |
| 12***14 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-14-1 Ram, Bucket
| 98***12 | Bush | 1 |
| 98***37 | Bush | 1 |
| 98***05 | Kit, Seal | 1 |
E4-17-1 Ram, Sidetip Shovel
| 99***00 | Ram, Assembly | 1 |
| 99***01 | Cylinder | 1 |
| 99***02 | Rod, Piston | 1 |
E4-7-1 Ram, Clamshovel
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-3-1 Ram, Lift
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-15-1 Ram, Stabiliser
| 98***00 | Ram, Stabiliser | 1 |
| 98***01 | Kit-Seal, Stabiliser Ram | 1 |
| 98***02 | Head, Piston | 1 |
E4-2-1 Ram, Crowd
| 12***15 | Bush, Spring | 1 |
| 12***14 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
F Axles, Wheels & Transmission
F1-1-3 Axle Assembly, Front
| 13***0Z | Screw, Set, M16 X 40 Lg | 4 |
| 13***1Z | Nut | 1 |
| 14***1Z | Washer, M16 Plain | 5 |
F1-1-1 Axle Assembly, Front
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 24***77 | Sprocket, Inner | 1 |
| 24***90 | Housing | 1 |
F1-1-2 Axle Assembly, Front
| 13***0Z | Bolt, M16 X 40mm | 1 |
| 13***3Z | Nut, M12 | 6 |
| 13***32 | Nut, M.16 | 1 |
F2-1-2 Axle Assembly, Rear
| 13***02 | Bolt, M.16 | 1 |
| 13***3Z | Nut, M12 | 6 |
| 13***32 | Nut, M.16 | 1 |
F2-1-1 Axle Assembly, Rear
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 24***89 | Sprocket, Outer | 1 |
| 24***90 | Housing | 1 |
F2-1-3 Axle Assembly, Rear
| 13***0Z | Screw, Set, M16 X 40 Lg | 1 |
| 13***1Z | Nut | 4 |
| 14***1Z | Washer, M16 Plain | 5 |
F3-7-1 Wheels & Tyres, 6 Stud, 7.00 X 15 Premium Wide Track
| 15***01 | Valve | 1 |
| 24***00 | Wheel, Assembly, 7 X 15, Premium Wide Track | 1 |
| 41***00 | Wheel, Centre | 1 |
F3-3-3 Wheel & Tyres, Segmented, 6 Stud
| 24***00 | Wheel, Assembly,Segmented, 240mm Wide, R.H. | 2 |
| 24***00 | Wheel, Assembly,Segmented, 240mm Wide L.H. | 2 |
| 41***00 | Rim, Right Hand | 1 |
F3-4-2 Wheels & Tyres, 6 Stud, 27 X 8.5 Goodyear
| 15***01 | Valve | 1 |
| 24***00 | Wheel, Assembly, 27 X 8.5, Dico | 4 |
| 24***00 | Wheel, Assembly, 27 X 8.5 | 4 |
F3-5-1 Wheels & Tyres, Solid, 8 Stud, 700 X 15 - 5.50
| 24***00 | Kit, Wheel And Tyre, Solid | 1 |
| 41***00 | Rim, Split Wheel | 1 |
| 42***00 | Tyre, 700x15 - 5.50, Solid | 1 |
F3-2-3 Wheels & Tyres, 6 Stud, 10 X 16.5
| 15***01 | Valve | 1 |
| 24***00 | Wheel, Assembly, 10 X 16.5 | 1 |
| 41***00 | Wheel, Centre | 1 |
F3-5-2 Wheels & Tyres, Solid, 6 Stud, 700 X 15 - 5.50
| 24***00 | Kit, Wheel And Tyre, Solid | 4 |
| 41***00 | Wheel, Centre | 1 |
| 42***00 | Tyre, 700x15 - 5.50, Solid | 1 |
F3-6-1 Wheels & Tyres, 6 Stud, 7.00 X 15
| 24***00 | Wheel, Assembly, 7.00 X 15 | 4 |
| 41***00 | Wheel, Centre | 1 |
| 42***00 | Tyre, 7 X 15, Tubed | 1 |
F3-3-4 Wheel & Tyres, Segmented, 6 Stud
| 24***00 | Wheel, Assembly, Segmented, 210mm Wide, R.H. | 2 |
| 24***00 | Wheel, Assembly,Segmented, 210mm Wide L.H. | 2 |
| 41***00 | Rim, Right Side | 1 |
F3-1-2 Wheels & Tyres, 6 Stud, 7.00, R15 Xzm
| 15***01 | Valve | 1 |
| 24***00 | Wheel, Assembly, 7.00 - R15 Xzm | 4 |
| 41***00 | Wheel, Centre | 1 |
F3-3-1 Wheel & Tyres, Segmented, 8 Stud
| 24***00 | Wheel, Assembly, R.Hand | 2 |
| 24***00 | Wheel, Assembly, L.Hand | 2 |
| 41***00 | Rim, Left Hand | 1 |
F3-4-1 Wheels & Tyres, 8 Stud
| 15***01 | Valve | 1 |
| 24***00 | Wheel, Assembly, 27 X 8.50-15 | 4 |
| 24***00 | Wheel, Assembly,27x8.50 | 4 |
F3-2-2 Wheels & Tyres, 6 Stud, 10 X 16.5 Hd2000
| 15***01 | Valve | 1 |
| 24***00 | Wheel, Assembly, 10 X 16.5 | 4 |
| 24***00 | Wheel, Assembly, 10 X 16.5 Hd2000 | 4 |
F3-3-2 Wheel & Tyres, Segmented, 8 Stud
| 24***00 | Wheel, Assembly, Right Hand, Segmented,210mm Wide | 2 |
| 24***00 | Wheel, Assembly, Left Hand, Segmented,210mm Wide | 2 |
| 41***00 | Rim, Left Side | 1 |
F3-2-1 Wheels & Tyres, 8 Stud, 10 X 16.5
| 15***01 | Valve | 1 |
| 24***00 | Wheel, Assembly, 10x16.5 | 4 |
| 24***00 | Wheel, Assembly, 10 X 16.5 | 4 |
F3-1-1 Wheels & Tyres, 8 Stud, 7 X 15
| 15***01 | Valve | 1 |
| 24***00 | Wheel, Assembly, 7x15; Part Number Applies To Tubed & Tubeless Tyres. When Ordering Tyre Assemblies, Please Specify Tubed Or Tubeless. | 4 |
| 41***00 | Wheel, Centre | 1 |
F5-1-1 Drive, Central
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***20 | Screw, Cap, M10 X 100 | 3 |
| 14***2Z | Washer | 6 |
F5-1-2 Drive, Central
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***20 | Screw, Cap, M10 X 100 | 3 |
| 14***2Z | Washer | 6 |
G Brakes
G1-2-1 Circuit, Brake, Emergency Release
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***2Z | Nut | 1 |
| 14***11 | Seal, Bonded | 5 |
G1-1-1 Brake, Master Cylinder
| 13***8Z | Screw, M8x30 | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
L Engine
L1-2-1 Engine, Short
| 02***00 | Engine, Short | 1 |
L1-1-1 Engine, Complete
| 01***00 | Engine, Complete, Naturally Aspirated | 1 |
| 01***0R | Engine, Reconditioned, Naturally Aspirated | 1 |
| 01***00 | Engine, Complete, Naturally Aspirated | 1 |
L1-5-1 Fans, Pulleys, & Fan Belt
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***17 | Key, Woodruff | 1 |
| 02***18 | Pulley, Crankshaft | 1 |
L1-8-2 Engine Mountings, High Flow Hydraulics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
L1-3-1 Block Assembly
| 02***01 | Pin, Roll | 4 |
| 02***02 | Plug | 2 |
| 02***03 | Plug | 8 |
L1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***16 | Crankshaft | 1 |
| 02***17 | Key, Woodruff | 2 |
| 02***20 | Pin, Dowel | 1 |
L1-6-1 Timing Case, Camshaft & Gears
| 02***24 | Seal, Front Oil | 1 |
| 02***27 | Housing, Front Oil Seal | 1 |
| 02***28 | Gasket, Front Seal Housing | 1 |
L1-7-1 Flywheel & Housing
| 02***19 | Flywheel, Assembly | 1 |
| 02***21 | Pin, Dowel | 3 |
| 02***22 | Housing, Flywheel | 1 |
L1-8-1 Engine Mountings
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
L1-5-3 Fans, Pulleys, & Fan Belts, High Flow Hydraulics
| 02***57 | Spacer, Fan, 25.4mm | 1 |
| 02***16 | Spacer, Fan, 13mm | 1 |
| 02***17 | Key, Woodruff | 1 |
L1-5-2 Fans, Pulleys, & Fan Belt, High Flow Hydraulics
| 01***01 | Pulley, Fan Drive | 1 |
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***17 | Key, Woodruff | 1 |
L2-2-1 Valves, Tappets &, Turbulence Chambers
| 02***99 | Seal, Valve Stem | 8 |
| 02***11 | Chamber, Turbulence, 1st Repair, 32.45mm | 0 |
| 02***12 | Chamber, Turbulence, 2nd Repair, 32.65mm | 0 |
L2-3-1 Cylinder Head Cover
| 02***93 | Cover, Rocker | 1 |
| 02***94 | Gasket, Rocker Cover | 1 |
| 02***27 | Washer | 3 |
L2-1-1 Cylinder Head
| 02***03 | Plug | 2 |
| 02***00 | Head, Cylinder | 1 |
| 02***01 | Gasket, Cylinder Head, 1.6mm Thick; Refer To T.I.Gen 051 July 1996. See Service Workshop Manual Section 2 For Head Gasket Selection. | 1 |
L3-2-1 Manifold, Exhaust
| 02***61 | Plate | 1 |
| 02***96 | Manifold, Exhaust | 1 |
| 02***97 | Gasket | 2 |
L3-1-1 Manifold, Induction
| 02***95 | Manifold, Inlet | 1 |
| 02***20 | Washer | 7 |
| 02***33 | Screw | 3 |
L3-3-1 Filter, Air
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 13***9Z | Setscrew, M8x35 | 4 |
| 14***36 | Mounting, Bonded | 4 |
L3-4-1 Exhaust System
| 02***99 | Kit-Silencer Fixing | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
L4-3-4 Radiator, Fittings & Mountings, High Flow Hydraulics
| 13***3Z | Screw, M6x16 | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
L4-4-4 Radiator & Hoses, High Flow Hydraulics, Hot Climate
| 02***22 | Cap, Filler | 1 |
| 02***23 | Sender, Low Water Level; This Switch Function Is Now Deleted From From, Expansion Tank, Replace With Plug 02/90***45. | 1 |
| 02***45 | Plug, De-Gassing Box | 1 |
L4-5-2 Coolant Manifold, & Transfer Pipework, (Optional Fuel Heater)
| 02***11 | Connector, Heater Substitute | 2 |
| 02***18 | Pipe, By-Pass | 1 |
| 02***19 | Clip, Jubilee | 1 |
L4-3-2 Radiator, Fittings & Mountings, High Flow Hydraulics
| 13***3Z | Screw, M6x16 | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
L4-1-1 Pump, Water
| 02***00 | Pump, Water | 1 |
| 02***01 | Gasket | 1 |
| 02***29 | Screw | 5 |
L4-3-1 Radiator, Fittings & Mountings
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
L4-4-1 Radiator & Hoses, Hi, Gh Flow, Uk Builds
| 02***22 | Cap, Filler | 1 |
| 02***23 | Sender, Low Water Level; This Switch Function Is Now Deleted From From, Expansion Tank, Replace With Plug 02/90***45. | 1 |
| 02***45 | Plug, De-Gassing Box | 1 |
L4-4-2 Radiator & Hoses, High Flow Hydraulics, Hot Climate
| 02***22 | Cap, Filler | 1 |
| 02***23 | Sender, Low Water Level; This Switch Function Is Now Deleted From From, Expansion Tank, Replace With Plug 02/90***45. | 1 |
| 02***45 | Plug, De-Gassing Box | 1 |
L4-4-3 Radiator & Hoses
| 02***22 | Cap, Filler | 1 |
| 02***23 | Sender, Low Water Level; This Switch Function Is Now Deleted From From, Expansion Tank, Replace With Plug 02/90***45. | 1 |
| 02***45 | Plug, De-Gassing Box | 1 |
L4-3-3 Radiator, Fittings & Mountings
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
L4-2-1 Thermostat, Housing, Inlet & Outlet
| 02***02 | Housing, Thermostat | 1 |
| 02***03 | Gasket | 1 |
| 02***04 | Thermostat | 1 |
L4-4-1 Radiator & Hoses
| 02***22 | Cap, Filler | 1 |
| 02***23 | Sender, Low Water Level; This Switch Function Is Now Deleted From From, Expansion Tank, Replace With Plug 02/90***45. | 1 |
| 02***45 | Plug, De-Gassing Box | 1 |
L4-5-1 Coolant Manifold, & Transfer Pipework, (Standard)
| 02***09 | Hose, By-Pass, Water Inlet | 1 |
| 02***11 | Connector, Heater Substitute | 2 |
| 02***14 | Gasket | 1 |
L5-5-1 Cooler, Oil, Filter & Pipework
| 02***05 | Washer, Seal | 1 |
| 02***16 | Clip, Jubilee | 2 |
| 02***19 | Connector | 1 |
L5-6-1 Oil Filler, Dipstick & Breather
| 02***07 | Bottle, Oil Filler/Dipstick | 1 |
| 02***08 | Cap, Oil Filler | 1 |
| 02***09 | Dipstick | 1 |
L5-5-2 Cooler, Oil, Filter & Pipework, High Flow Hydraulics, Uk Builds
| 01***02 | Cooler, Modine Oil | 1 |
| 01***04 | Connector | 1 |
| 02***05 | Washer, Seal | 1 |
L5-5-3 Cooler, Oil, Filter & Pipework, High Flow Hydraulics, Worldwide
| 01***05 | Connector | 1 |
| 02***05 | Washer, Seal | 1 |
| 02***16 | Clip, Jubilee | 2 |
L5-2-1 Pump, Oil
| 02***03 | Pump, Oil | 1 |
| 02***04 | Plunger | 1 |
| 02***05 | Spring | 1 |
L5-1-1 Sump, Oil
| 02***05 | Washer, Seal | 1 |
| 02***00 | Sump, Oil | 1 |
| 02***01 | Gasket, Oil Sump | 1 |
L6-1-1 Pump, Fuel Injection, & Fast Idle Control
| 02***50 | Flange, Special Tool | 1 |
| 02***56 | Clamp, Cable | 1 |
| 02***57 | Thermostat, Fast Idle | 1 |
L6-1-2 Mounting Bracket, Fuel Injection Pump
| 02***52 | Bracket, Pump Mounting | 1 |
| 02***53 | Dowel, Hollow | 2 |
| 02***54 | Bush | 1 |
L6-4-3 Fuel Pipes, Fuel Tank To Filter, Standard
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
L6-2-1 Injectors, Fuel, & Injection Pipes
| 02***59 | Seal | 4 |
| 02***60 | Pipe, Assembly, Injector, Number 1.2.3.4 | 1 |
| 02***61 | Plug | 1 |
L6-3-1 Fuel Pipes, Injection Pump
| 02***69 | Washer, Seal | 2 |
| 02***70 | Pipe, Fuel, Inj/Pump Return | 1 |
| 02***71 | Washer, Seal | 2 |
L6-7-2 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
L6-7-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
L6-4-4 Fuel Pipes, Fuel Tank To Filter, Optional Fuel Heater
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
L6-4-1 Fuel Pipes, Fuel Tank To Filter, Standard
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
L6-4-2 Fuel Pipes, Fuel Tank To Filter, Optional Fuel Heater
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
L8-1-2 Gasket Set, Overhaul
| 02***14 | Kit-Gasket | 1 |
L8-1-1 Gasket Set, Overhaul, Top
| 02***15 | Kit-Gasket | 1 |
ROBOT 165 serial number reference
The machine identification plate is located on the front edge of the right-hand mudguard. On early machines, the serial number is stamped on the right-hand side of the machine. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 00675006-00676800 | JCB Robot 165 standard configuration | Identified in JCB Robot 165 Parts Catalogue Manual. Verify with dealer for exact configuration. |
| 00677001-00677999 | JCB Robot 165 standard configuration | Identified in JCB Robot 165 Parts Catalogue Manual. Verify with dealer for exact configuration. |
| 00678002-00679822 | JCB Robot 165 HF (High Flow) configuration | Identified in JCB Robot 165HF Parts Catalogue Manual. Verify with dealer for exact configuration. |
Frequently asked questions
What engine does the JCB Robot 165 use?
The JCB Robot 165 uses a Perkins 104.22 four-cylinder diesel engine producing 35 kW (47.2 HP).
What is the operating weight of the JCB Robot 165?
The operating weight of the JCB Robot 165 is approximately 3,796 kg (8,368 lb).
What model replaced the JCB Robot 165?
The JCB Robot 165 was succeeded by the Robot 170 and Robot 180 models in JCB's compact loader lineup.
Serial-range & configuration variants
This page covers the Jcb ROBOT 165. Related factory variants of the same model family:
ROBOT 165ROBOT-165
Need a specific ROBOT 165 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.