JCBagriculturaltelescopic handlers (loadall)
Jcb MiniScopic (ROW)(MiniScopic (ROW))
Maintenance schedule, common problems & OEM parts breakdown
The JCB 515-40 Miniscopic is a compact telescopic handler designed for restricted access and low-headroom applications. Weighing 3,480 kg (7,672 lb), it features a 50 hp Deutz 2.3-liter four-cylinder engine and an offset single-spine C-shaped chassis that allows for a full-size cab within a 1.8 m (5 ft 11 in) height. It offers four-wheel drive, four-wheel steering, and a hydrostatic transmission with a 2.8 m turning circle. The machine lifts 1,500 kg to 4 m and 1,000 kg at 2 m outreach. It was manufactured in JCB's Cheadle facility and targets construction, agricultural, and industrial markets.
The Miniscopic replaced the 520-40 as JCB's smallest telehandler, offering reduced height and weight while maintaining lift capacity. Its unique chassis design and compact footprint distinguish it from standard Loadall models, sharing more components with JCB's Teletruck and skid-steer lines. In the used and parts market, the Miniscopic is valued for its maneuverability in tight spaces and its Deutz engine reliability. The offset chassis and independent wheel motors are key differentiators, making it a niche but sought-after machine for indoor and agricultural use.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb MiniScopic (ROW)(MiniScopic (ROW)) specifications
Engine
| Model | Deutz 4-cylinder 2.3-litre |
| Power | 50 hp (37 kW) |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 3,480 kg (7,672 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Height | 1.8 m (5 ft 11 in) |
| Transport Width | 1.56 m (5 ft 1 in) |
| Transport Length | 3.23 m (10 ft 7 in) to front of carriage; 2.97 m (9 ft 9 in) overall |
| Turning Circle | 2.8 m (9 ft 2 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speed | 20 km/h (12.4 mph) |
| Lift Capacity | 1,500 kg (3,307 lb) at 4 m (13 ft 1 in) height |
| Lift Capacity at Reach | 1,000 kg (2,205 lb) at 2 m (6 ft 7 in) reach; 750 kg (1,653 lb) at 2.54 m (8 ft 2 in) reach |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | 48 litres (12.7 gal) capacity; 46-48 litres/min (12.2-12.7 gal/min) flow |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb MiniScopic (ROW)(MiniScopic (ROW)) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the MiniScopic (ROW)(MiniScopic (ROW)) beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic tank, and axle systems to establish a baseline. Monitor hydraulic return filter magnets for metallic debris, indicating early wear in pumps or motors. Use JCB ServiceMaster to scan the ECM for developing fault codes before they trigger shutdowns. Check turbocharger shaft play and charge cooler boot integrity to prevent boost leaks. Track fuel filter restriction to protect the common-rail injectors. Regular fluid analysis prevents catastrophic failures by identifying contamination trends early.
Corrective & Common Repairs
Address hydraulic hose chafing at the kingpost and boom pivots, common in tight-turning applications. Inspect cylinder rods for scoring that causes seal leaks. Check the hydrostatic transmission drive belts for tension and wear. Verify the operation of the load moment indicator (LMS) and its sensors. Inspect the independent wheel motors for leaks or damage. Replace worn GET teeth and pins to maintain lifting efficiency. Fixing these issues promptly prevents secondary damage to expensive hydraulic and structural components.
Overhaul & Rebuild Points
At 2,000 hours, inspect the structural frame and boom for cracks or unauthorized welding. Measure swing ring play on excavator variants using dial indicators. Service the immersed brakes on wheeled models, checking disc wear. Check injector spray patterns and replace as needed. Inspect the slew ring bolts for proper torque. These deep-service tasks confirm the machine's structural integrity and powertrain health, determining if the unit is viable for extended service life or requires major component replacement.
Seasonal & Environment Servicing
In cold climates, ensure the cooling system is flushed and refilled with JCB-spec long-life coolant to prevent freezing. Check the cab HVAC system for proper heating and defrosting operation. In dusty environments, clean the air filter housing frequently and replace the element per restriction indicators. Inspect the undercarriage and track tension for mud buildup that accelerates wear. Protect the hydraulic tank and filters from moisture contamination. Proper seasonal prep ensures reliable operation in agricultural and construction settings.
MiniScopic (ROW)(MiniScopic (ROW)) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925872 | Filter, Fuel Element, Cartridge | Fuel system service | Check fitment → |
| 32/925873 | Head, Fuel Filter | Fuel system service | Check fitment → |
| 923/10166 | Filter, Cab Air | Air intake service | Check fitment → |
| 32/925348 | Element, Main, Air Filter | Air intake service | Check fitment → |
| 32/925349 | Element, Safety, Air Filter | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
MiniScopic (ROW)(MiniScopic (ROW)) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Too low pressure in the fuel line / system | Fuel supply restriction, clogged filter, or failing lift pump | Check fuel filter condition and fuel line integrity |
| P0088 | Too high pressure in the fuel line / system | Fuel pressure regulator malfunction or restricted return line | Inspect fuel pressure regulator and return lines |
| P0115 | Circuit 1, engine coolant temperature sensor | Faulty coolant temperature sensor or wiring harness issue | Verify sensor resistance and connector condition |
| P0116 | Range / Performance of circuit 1 of the coolant temperature sensor | Sensor out of calibration range or intermittent signal | Test sensor signal against known good values |
| P0335 | Crankshaft Position Sensor "A" Circuit / No Signal | Damaged sensor, wiring fault, or timing gear issue | Inspect sensor wiring and connector for damage |
| P0336 | Torque Reduction Crank Sensor Fault (Signal Fault) | Intermittent signal or signal out of range | Check sensor air gap and signal waveform |
| P0101 | MAF Sensor Fault | Dirty or failed Mass Air Flow sensor | Clean or replace MAF sensor |
| P0102 | Torque Reduction MAF Low Voltage Fault | MAF sensor circuit low voltage or open circuit | Check MAF sensor power and ground circuits |
| P0103 | Torque Reduction MAF High Voltage Fault | MAF sensor circuit high voltage or short to battery | Inspect MAF sensor wiring for shorts |
| P0200 | Injector circuit open | Open circuit in injector wiring or connector | Check injector connector and wiring harness |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
MiniScopic (ROW)(MiniScopic (ROW)) attachments & work tools
Quickhitch Systems
The 515-40 Miniscopic is specified with either a mechanical compact Loadall quickhitch or a skid steer quickhitch to allow compatibility with existing attachments.
General Purpose Buckets
Standard attachment options include general purpose shovels equipped with either teeth or a toeplate for material handling.
Hydraulic System
The machine utilizes auxiliary hydraulics with a standard 46 litres per minute pump, with an optional detent for attachments requiring constant flow.
Safety & Visibility Options
Factory options include an automatic eye-level audio-visual load moment indicator warning system, front screen guards, and sun blinds.
Operator Comfort Options
The cab supports optional air conditioning and adjustable deluxe suspension seats, available in either fabric or vinyl finishes.
Lighting & Warning Equipment
Available equipment includes work lights, road lights, rotating flashing beacons, and fire extinguishers for site safety.
Chassis & Protection
Options include traction, industrial, or semi-turf tyres, chaff guards, and canopies to suit specific operating environments.
All MiniScopic (ROW)(MiniScopic (ROW)) assemblies by section
Every catalogued assembly group for the Jcb MiniScopic (ROW)(MiniScopic (ROW)). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-2-1 Toeplate, Bolt On, Made Obsolete By Epi P01924_aa
| 13***1Z | Nut | 11 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 11 |
| 33***23 | Shovel, Gp 1620 mm | 1 |
A1-4-1 Shovel, 6 In 1, 68"
| 13***3Z | Bolt, M8 X 55 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 24***93 | Shovel, Clam 6 In 1, 1730 Wide | 1 |
A1-6-1 Guard, Shovel, Tooth
| 13***2D | Setscrew | 2 |
| 13***3D | Nut | 2 |
| 14***9D | Washer, Hardened | 4 |
A1-3-2 Shovel, And Teeth
| 13***1Z | Nut | 12 |
| 33***88 | Tooth, Bucket | 6 |
| 33***23 | Shovel, Gp 1620 mm | 1 |
A1-1-1 Shovel, 1620 Wide
| 33***05 | Plate, Pivot | 2 |
| 33***23 | Shovel, Gp 1620 mm | 1 |
| 33***55 | Toeplate | 1 |
A1-2-2 Shovel, And Toeplate
| 13***1Z | Nut | 11 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 11 |
| 33***23 | Shovel, Gp 1620 mm | 1 |
A1-5-1 Shovel, G.P. Shovel 0.5 Cu M
| 51***04 | Sidecutter | 2 |
| 51***33 | Strip, Wear, Front | 2 |
| 51***35 | Strip, Wear, Short | 3 |
A1-3-1 Shovel, Tooth - Made Obsolete By Epi P01924_aa
| 13***1Z | Nut | 12 |
| 33***88 | Tooth, Bucket | 6 |
| 33***80 | Ga Shovel Tooth | 1 |
A3-1-1 Quickhitch, Fork, Frame
| 29***00 | Carrier, Fork | 1 |
| 29***81 | G.A. | 1 |
A3-2-1 Quickhitch, Assembly
| 13***7D | Setscrew, M8x25 | 2 |
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***8D | Bolt, M10 X 80 | 1 |
A3-4-1 Frame, Floating Forks
| 13***8D | Bolt, M10 X 80 | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 29***70 | Bar, Fork | 1 |
A3-3-1 Tool Carrier
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Bolt | 1 |
| 13***3D | Nut, M10 Grade 10.9 | 1 |
A3-3-2 Tool Carrier
| 13***9D | Bolt | 1 |
| 13***8D | Setscrew, M10x30 | 2 |
| 13***3D | Nut, M10 Grade 10.9 | 1 |
A3-5-1 Floating Forks
| 14***00 | Handle, Locking (Metric) | 1 |
| 33***93 | Fork, 1067 Long (Pair) | 1 |
| 33***02 | Fork, (Pair) | 1 |
A3-2-2 Quickhitch
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***8D | Bolt, M10 X 80 | 1 |
| 13***7D | Bolt, M12 X 75mm Long | 2 |
B Bodywork
B1-21-1 Guard, Hose
| 13***8D | Setscrew, M8 X 30mm | 3 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 4 |
B1-19-1 Grille
| 14***6D | Washer, M6 Plain | 8 |
| 33***60 | Grill Pressing | 1 |
| 82***21 | Screw, Button Head M6x20, Stainless | 8 |
B1-4-1 Grille, Cooling
| 13***5D | Setscrew, M6 X 20mm Long | 8 |
| 14***6D | Washer, M6 Plain | 8 |
| 33***19 | Grille, Cooling, Assembly | 1 |
B1-7-2 Engine, Bay
| 13***2D | Screw, M16 X 50lg | 5 |
| 13***8D | Bolt, M12 X 30 | 1 |
| 13***1D | Nut, M12 | 1 |
B1-23-1 Chaff Guard
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***55 | Pressing, Chaff Guard | 1 |
B1-26-1 Cover, Hydraulic Motor, Hoses, Right
| 13***5D | Setscrew, M8x20 | 5 |
| 13***3D | Nut, M8 Locking | 3 |
| 14***7D | Washer, M8 Plain | 8 |
B1-14-1 Bracket, Hinge
| 13***07 | Nut, Weld | 2 |
| 33***43 | Plate, Mounting | 1 |
| 33***86 | Pivot, Pin | 1 |
B1-1-1 Chassis
| 33***97 | Chassis, M/C -, Miniscopic | 1 |
| 33***87 | Chassis, Assembly | 1 |
B1-28-1 Guard, Belly Plate
| 13***7D | Screw, M6 X 25mm | 4 |
| 14***6D | Washer, M6 Plain | 4 |
| 33***48 | Wa Belly Guard | 1 |
B1-7-1 Engine, Bay
| 13***2D | Screw, M16 X 50lg | 5 |
| 13***8D | Bolt, M12 X 30 | 1 |
| 13***1D | Nut, M12 | 1 |
B1-6-1 Cover, Inspection
| 33***94 | Cover, Inspection | 1 |
| 33***25 | Cover, Inspection, Assembly | 1 |
| 33***66 | Seal, Neoprene | 1 |
B1-25-1 Cover, Rear, With Lights
| 13***8D | Screw, M5x30 | 2 |
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***5D | Setscrew, M8x20 | 2 |
B1-20-1 Side Panel
| 13***9D | Setscrew, M8x35 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 33***04 | Seal, Upper, Side Panel | 1 |
B1-27-1 Cover, Hydraulic Motor, Hoses, Left
| 13***5D | Setscrew, M8x20 | 5 |
| 13***3D | Nut, M8 Locking | 3 |
| 14***7D | Washer, M8 Plain | 8 |
B1-22-1 Engine Mounting
| 13***7D | Setscrew, M8x25 | 8 |
| 13***7D | Setscrew, M10 X 25mm Long | 6 |
| 13***9D | Setscrew, M10 X 35mm Long | 6 |
B1-29-1 Cap, Diesel Fuel
| 33***01 | Chain, Retaining | 1 |
| 33***15 | Cap, Locking, Diesel | 1 |
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
B1-2-1 Engine, Bay, W.A.
| 13***07 | Nut, Weld | 13 |
| 33***69 | Plate, Support | 1 |
| 33***63 | Plate, Rear Hanger | 1 |
B1-5-1 Panel, Rear, Side
| 26***01 | Net, Stowage | 1 |
| 33***58 | Panel, - Rear Side | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 6 |
B1-17-1 Infill Plate
| 13***5D | Setscrew, M8x20 | 1 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***9D | Setscrew, M8x35 | 1 |
B1-11-1 Bonnet
| 13***7D | Setscrew, M8x25 | 7 |
| 13***3D | Nut, Self Lock M8 | 3 |
| 14***7D | Washer, M8 Plain | 10 |
B1-18-1 Wheel Arch
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***9D | Setscrew, M8x35 | 1 |
B1-30-1 Bonnet, Assembly
| 33***50 | Bonnet Moulding | 1 |
| 33***85 | Striker Mount | 1 |
| 33***19 | Hinge Support | 1 |
B1-8-1 Bonnet, Support
| 13***5D | Setscrew, M8x20 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 24***05 | Grommet | 1 |
B1-7-3 Engine, Bay
| 13***2D | Screw, M16 X 50lg | 5 |
| 13***8D | Bolt, M12 X 30 | 1 |
| 13***1D | Nut, M12 | 1 |
B1-13-1 Bracket, Hinge
| 13***07 | Nut, Weld | 2 |
| 33***43 | Plate, Mounting | 1 |
| 33***86 | Pivot, Pin | 1 |
B1-9-1 Cover, Hydraulic Tank
| 14***6D | Washer, M6 Plain | 2 |
| 33***18 | Cover, Hydraulic Tank, Assembly | 1 |
| 33***77 | Cover, Hydraulic Tank | 1 |
B1-12-1 Cover, Left Side
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
B1-15-1 Cover, Left Side, Abi
| 33***01 | Cover, Side Left | 1 |
| 33***35 | Cover, Left | 1 |
| 33***90 | Pad, Mounting | 1 |
B1-10-1 Fuel Tank
| 13***5Z | Bolt | 4 |
| 14***6D | Washer, M6 Plain | 4 |
| 32***90 | Plug, Drain | 1 |
B1-3-1 Counterweight
| 13***8D | Setscrew, M12 X 30 | 2 |
| 13***2D | Setscrew, M16 X 50mm | 4 |
| 13***6D | Bolt, M16 X 160 Lg | 2 |
B1-24-1 Cover, Rear, No Lights
| 12***76 | Grommet, Blind,Hole Dia 50mm, Panel Thickness 3mm | 1 |
| 13***8D | Screw, M5x30 | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
B2-6-1 Window, Assembly
| 13***8Z | Nut, Flange Head, M8 | 4 |
| 23***29 | Retainer, Catch | 1 |
| 33***47 | Hinge, Block, Assembly | 2 |
B2-41-1 Grommets, (Cab/Canopy)
| 24***08 | Grommet | 2 |
| 24***10 | Grommet | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 4 |
B2-35-1 Air Conditioning, Heater, Panel
| 33***89 | Panel, Ac Heater | 1 |
| 33***83 | Diffuser, -Slim Air | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 3 |
B2-40-1 Gauge,Inclinometer
| 70***00 | Gauge, Inclinometer/Level | 1 |
B2-17-1 Glazing, Standard, Kit
| 33***35 | Pillar, Window | 4 |
| 33***95 | Glass, Rear Window Plain | 1 |
| 33***92 | Glass, - Front Wind Screen | 1 |
B2-23-1 Seat, Fabric, Components
| 33***16 | Seat, Cobo Mt01, - Fabric | 1 |
B2-34-1 Hose And Pipework, Air Conditioning
| 22***06 | Clip, Jubilee | 4 |
| 33***99 | Hose, Air Con Drier To Ac Heater | 1 |
| 33***01 | Pipe, A/C, Cond To Rec | 1 |
B2-1-1 Door, Stable
| 33***17 | Door, Assembly | 1 |
| 33***39 | Window, Assembly | 1 |
| 33***91 | Lock, Window, Assembly | 1 |
B2-15-2 Seat, Suspension, Fabric
| 13***5D | Setscrew, M8x20 | 5 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***03 | Nut | 2 |
B2-3-1 Door, Lower
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 13***8Z | Nut, Flange Head, M8 | 4 |
B2-25-1 Heater, Blanking Plates (No Heater)
| 33***56 | Blank Heater Panel | 1 |
| 33***82 | Plate - Air Intake B | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 7 |
B2-15-1 Seat, Suspension, Fabric
| 13***5D | Setscrew, M8x20 | 5 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***03 | Nut | 2 |
B2-20-1 Radio, Blanking Plates
| 33***18 | Blank, Radio, Assembly | 1 |
| 71***00 | Cover, Radio Blanking; Replaces 69***51, For Radio See C3-11-1. Fitted Inplace Of Radio., Cover, Radio Blanking; Replaces 69***51 | 1 |
B2-11-1 Guard, Screen
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
B2-10-1 Cab, Interior, Bolhoffs
| 82***03 | Nut, Rivet,M8 Open Ended | 17 |
| 82***33 | Nut, Rivet,M5 Open Ended | 2 |
| 82***79 | Nut, M6 | 19 |
B2-30-1 Air Conditioning, & Heater Unit
| 13***3D | Setscrew, M16x16 | 2 |
| 13***5D | Screw, Set | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
B2-18-1 Mats & Fittings
| 29***70 | Protection, Kicking Strip, Assembly | 1 |
| 33***35 | Floormat | 1 |
| 33***97 | Cover, Wheel Arch | 1 |
B2-5-1 Block Assembly, Hinge
| 33***47 | Hinge, Block, Assembly | 1 |
| 33***81 | Pin, Hinge; Superseded By 33***47 Assembly - See San 25804, Dar 09/05/08 | 1 |
| 33***85 | Bush, Nylon; Superseded By 33***47 Assembly - See San 25804, Dar 09/05/08 | 1 |
B2-27-1 Mirror, Kit
| 12***00 | Mirror, With Bracket | 2 |
B2-12-1 Glazing, Canopy, Glass Kit
| 33***35 | Pillar, Window | 2 |
| 33***95 | Glass, Rear Window Plain | 1 |
| 41***04 | Adhesive, Glazing, 200 Litre Drum | 0 |
B2-37-1 Heater
| 13***7Z | Screw, M8 X 25 | 2 |
| 14***95 | Vent, Elbow | 1 |
| 22***06 | Clip, Jubilee | 4 |
B2-36-1 Heater, Air Conditioning, Unit Assembly - Components
| 33***18 | Heater, /Ac Unit | 1 |
B2-0-20 Cab, Black Canopy - Abi (Index Page)
| 29***43 | Wiper, Assembly | 1 |
| 33***33 | Kit, Glass, Assembly | 1 |
| 33***05 | Rivet Nut, Assembly | 1 |
B2-3-2 Door, Lower
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 13***8Z | Nut, Flange Head, M8 | 4 |
B2-0-0 Cab, Black-Glass+Rear/Roof Cab (Index Page)
| 33***31 | Wiper, Front, Assembly | 1 |
| 33***32 | Wiper, Roof, Assembly | 1 |
| 33***33 | Wiper, Rear, Assembly | 1 |
B2-42-1 Cab Door Lock, Bolt Striker Assembly
| 33***91 | Guard, Striker | 1 |
| 33***51 | Bolt, Door Striker | 1 |
| 82***10 | Washer, Plain | 1 |
B2-39-1 Hook, Coat
| 12***96 | Hook, Coat | 1 |
| 14***01 | Screw, Self Tapping | 1 |
| 29***68 | Hook, Coat, Assembly | 1 |
B2-26-1 Console, Plastic Dash
| 13***5D | Setscrew, M8x20 | 1 |
| 13***07 | Bolt, M8 X 25 | 2 |
| 13***01 | Nut | 2 |
B2-0-30 Cab, Common Parts (Index Page)
| 29***68 | Hook, Coat, Assembly | 1 |
| 33***01 | Plate, Infill, Assembly | 1 |
| 33***24 | Panel, Rear Side, Assembly | 1 |
B2-28-1 Mirror, High Visibility
| 33***27 | Mirror, Panoramic | 1 |
| 33***50 | Wa Mirror Mtg | 1 |
B2-7-1 Window, Lock Back
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 2 |
B2-4-1 Handle, Door
| 33***15 | Handle, Door, (Lh); Superseded By 33***29 On San26366 D.Jackson 05/09/08 ( Identical Part Advised By Happich Via Andy Weir), Except Landpower Cab It Is Right Hand | 1 |
B2-13-1 Mountings, Cab
| 12***02 | Plate, Compression | 4 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***1D | Screw, M16 110 Lg | 1 |
B2-21-1 Armrest
| 13***5D | Setscrew, M8x20 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 33***23 | Pad, Armrest | 1 |
B2-24-1 Guard, Screen, (No Screen Guard)
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
B2-8-1 Cab, Painted And Sealed
| 33***12 | Cab, Painted | 1 |
| 33***46 | Cab, /Canopy Sealant, Assembly | 1 |
| 33***66 | Cab | 1 |
B2-33-1 Receiver Drier
| 16***26 | Receiver, Drier | 1 |
| 22***09 | Clip, Jubilee | 2 |
| 33***04 | Bracket, Rec/Dryer | 1 |
B2-32-1 Moulding, Roof
| 33***14 | Seal, Foam Strip, 10 X 10 X 834 | 1 |
| 33***17 | Moulding, Roof | 1 |
| 33***47 | Canopy, Grille | 1 |
B2-0-10 Cab, Black + Glass - Abi (Index Page)
| 29***43 | Wiper, Assembly | 1 |
| 33***31 | Wiper, Front, Assembly | 1 |
| 33***53 | Kit, Cab Glazing | 1 |
B2-31-1 Air Conditioning, Heater
| 13***5D | Setscrew, M8x20 | 2 |
| 14***95 | Vent, Elbow | 5 |
| 14***7D | Washer, M8 Plain | 2 |
B2-19-1 Door, Kick Strip
| 29***70 | Protection, Kicking Strip, Assembly | 1 |
| 33***13 | Door Entry Kickstrip | 1 |
| 82***83 | Screw, M6 X 25 | 2 |
B2-9-1 Cab, Glass Glazing, Kit - Wiper Option
| 33***35 | Pillar, Window | 4 |
| 33***92 | Glass, - Front Wind Screen | 1 |
| 33***69 | Glass, -Roof | 1 |
B2-6-2 Window, Assembly
| 13***8Z | Nut, Flange Head, M8 | 4 |
| 23***29 | Retainer, Catch | 1 |
| 33***47 | Hinge, Block, Assembly | 2 |
B2-14-2 Seat, Suspension, Vinyl
| 13***5D | Setscrew, M8x20 | 5 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***03 | Nut | 2 |
B2-16-1 Roof Liner
| 33***99 | Lining, Roof, Assembly | 1 |
| 33***13 | Lining, Roof | 1 |
| 82***16 | Washer, Nylon, M6 | 3 |
B2-22-2 Seat, Vinyl, Components
| 33***51 | Kit-Seat Belt, Retractable | 1 |
| 33***56 | Cover, Seat | 1 |
| 33***57 | Cover, Back | 1 |
B2-14-1 Seat, Suspension, Vinyl
| 13***5D | Setscrew, M8x20 | 5 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***03 | Nut | 2 |
B2-38-1 Heater, Panel
| 33***83 | Diffuser, -Slim Air | 1 |
| 33***91 | Panel, Heater | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 3 |
B3-22-1 332/W7390, Wear Pads
| 33***23 | Pad, Wear | 1 |
| 33***40 | Boss | 2 |
| 33***90 | Abi Wear Pad | 1 |
B3-10-1 Pads, Wear Pads, Boom
| 13***3D | Screw | 6 |
| 13***7D | Screw | 4 |
| 14***7D | Washer, M8 Plain | 6 |
B3-20-1 332/W7400, Wear Pads
| 33***93 | Wear Pad | 1 |
| 33***40 | Boss | 2 |
| 33***00 | Abi Wear Pad | 1 |
B3-11-1 Pivot Pins, Assembly
| 13***9D | Bolt, Special M8x90 | 2 |
| 13***2D | Bolt, M8 X 120 Lg | 1 |
| 13***1D | Bolt, M10 X 45mm Long | 1 |
B3-23-1 332/W7339, Wear Pads
| 33***79 | Pad, Wear | 1 |
| 33***39 | Abi Wear Pad | 1 |
| 33***40 | Boss | 2 |
B3-21-1 332/W7394, Wear Pads
| 33***94 | Pad, Wear | 1 |
| 33***40 | Boss | 2 |
| 33***94 | Abi Wear Pad | 1 |
B3-10-2 Pads, Wear Pads, Boom
| 13***5D | Screw, M10 X 20 Nylon Patch | 6 |
| 13***7D | Bolt | 4 |
| 14***8D | Washer, M10 | 6 |
B3-12-1 Strut, Safety, Assembly
| 13***2D | Nut, Thin | 2 |
| 14***57 | Strap | 1 |
| 14***7D | Washer, M8 Plain | 2 |
B3-12-2 Safety Strut
| 13***2D | Nut, Thin | 2 |
| 14***57 | Strap | 1 |
| 14***7D | Washer, M8 Plain | 2 |
B5-1-1 Decals
| 33***50 | Decal, Multi-Warning | 1 |
| 33***09 | Label, Filter Checking | 1 |
| 33***31 | Decal, Warning, Pressure Hazard, Consult Service Manual | 1 |
B5-10-1 Emergency Hammer, Glass
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
| 33***06 | Bracket, Breaker Tool Holder | 1 |
| 82***37 | Rivet, 1/8" Blind | 2 |
B5-12-1 Recovery Pin
| 25***03 | Ring, Key | 1 |
| 33***01 | Pin, Tow | 1 |
| 33***82 | Retainer, Wire Rope | 1 |
B5-11-1 Fire Extinguisher
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 14***7D | Washer, M8 Plain | 2 |
B5-13-1 Sound Proofing
| 13***5D | Setscrew, M8x20 | 5 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
C Electrics, Machine, Cab And Engine
C1-0-0 Electrics, Main
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***3D | Nut, M6 Lock | 4 |
| 14***6D | Washer, M6 Plain | 8 |
C1-10-1 Alarm, Reverse
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
C1-1-1 Front , Worklights
| 70***54 | Worklight, Pedestal Mount | 2 |
| 70***04 | Switch, Panel | 1 |
| 71***06 | Fuse, 15 Amp, Fuse, 15 Amp; C3 - Thermostart. On Fastrac 185ti From M636--- - Provides Ether Start Circuit Protection. | 1 |
C1-2-1 Front , &, Rear Work Lights
| 33***27 | Ga Work Lights - Fro | 1 |
| 70***54 | Worklight, Pedestal Mount | 4 |
| 70***04 | Switch, Panel | 1 |
C1-11-1 Alarm, Reverse, Components
| 71***00 | Alarm, Reverse | 1 |
| 72***01 | Connector, Male | 2 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 2 |
C1-6-1 Light, Front, Components
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***3D | Nut, Self Lock M10 | 3 |
| 14***8D | Washer, M10 | 3 |
C1-5-1 Light, Rear
| 13***1D | Nut, Plain, M4 | 12 |
| 14***4D | Washer, Plain M4 | 12 |
| 33***40 | Light, Rear Fog | 1 |
C1-4-1 Light, Road, Right Side
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***4D | Screw | 2 |
| 14***7D | Washer, M8 Plain | 6 |
C1-22-1 Load Control, L.M.I
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***0D | Bolt | 4 |
| 13***1D | Nut, Plain | 2 |
C1-3-1 Lighting, Road, Left Side
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***4D | Screw | 2 |
| 14***7D | Washer, M8 Plain | 6 |
C2-1-1 Battery
| 13***5D | Screw, M5x20 | 2 |
| 13***3D | Setscrew | 2 |
| 13***7D | Setscrew, M8x25 | 4 |
C3-15-1 Wiper, Rear
| 15***00 | Connector, 'T' Piece | 1 |
| 29***00 | Jet, Washer, Assembly | 1 |
| 33***62 | Pad, 3m Dual-Lock | 1 |
C3-1-3 Cab, Electrics
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, M6 Lock | 2 |
C3-1-1 Cab, Electrics
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 2 |
C3-10-1 Radio
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 33***54 | Speaker, Bracket | 2 |
| 33***21 | Radio, 12v | 1 |
C3-1-2 Cab, Electrics
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 2 |
C3-2-1 Compressor
| 13***7D | Setscrew, M8x25 | 5 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
C3-14-1 Radio, Fitting Kit
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 33***54 | Speaker, Bracket | 2 |
| 33***53 | Harness, Radio Link | 1 |
C3-1-4 Cab, Electrics
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, M6 Lock | 2 |
C3-16-1 Wiper, Front
| 33***55 | Spacer | 1 |
| 33***63 | Bracket | 1 |
| 53***03 | Valve, Non-Return | 1 |
C3-11-1 Face Level Fan
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***3D | Nut, M6 Lock | 4 |
| 14***6D | Washer, M6 Plain | 4 |
C3-12-1 Wiper, Roof Window
| 29***00 | Jet, Washer, Assembly | 1 |
| 33***62 | Pad, 3m Dual-Lock | 1 |
| 33***11 | Motor, Wiper | 1 |
C3-13-1 Beacon
| 33***87 | Beacon, Assembly | 1 |
| 70***00 | Beacon, 12v, (155mm Tall) | 1 |
| 70***25 | Actuator, Beacon, Convoy Warning | 1 |
D Controls
D1-3-1 Control Rod, Short
| 12***02 | Joint, Ball, M8 Right Hand | 1 |
| 13***2Z | Nut, M8 | 2 |
| 33***74 | Control Rod | 1 |
D1-1-1 Controls, Loader, (Including Valve Block)
| 13***5D | Setscrew, M8x20 | 1 |
| 13***1D | Setscrew, M8x45 | 3 |
| 13***2D | Setscrew, M8 X 50 | 1 |
D1-2-1 Control Rod, Long
| 12***02 | Joint, Ball, M8 Right Hand | 1 |
| 13***2Z | Nut, M8 | 2 |
| 33***79 | Control Rod | 1 |
D2-2-2 Throttle Pedal
| 13***9D | Setscrew, M8x35 | 1 |
| 13***8D | Setscrew, M12 X 30 | 2 |
| 13***3D | Nut, Lock M5 | 1 |
D2-1-1 Throttle Control
| 13***0D | Setscrew, M6x10 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 33***82 | Pressing, Spring Return | 1 |
D2-2-1 Throttle Pedal
| 13***8Z | Bolt | 1 |
| 13***9D | Setscrew, M8x35 | 1 |
| 13***8D | Setscrew, M12 X 30 | 2 |
E Hydraulics
E1-13-1 Hoses, Dual Speed Change
| 33***40 | Hose, 1/4 Bsp Hp 1100mm | 1 |
| 33***41 | Hose, 1/4 Bsp Hp 652mm | 1 |
| 33***96 | Hose, 1/4 Bsp Hp 1730mm | 1 |
E1-4-1 Transmission, Hoses & Fittings, Rear
| 33***08 | Hose, Clamp Top Plate | 2 |
| 33***09 | Clamp, Screw | 4 |
| 33***40 | Hose, 5/8 Bsp Uhp 780 | 1 |
E1-18-2 Hoses, Service
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***0D | Bolt, M8x100 | 3 |
E1-5-1 Clamps, Hose, Right Wheel - Front
| 13***0D | Bolt, M8x40 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
E1-0-1 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-6-1 Hoses, Transmission, Front - Right
| 33***76 | Hose, Transmission Front, Right Assembly | 1 |
| 33***90 | Hose, 3/4 Bsp Hp 1814mm | 1 |
| 33***91 | Hose, 5/8 Bsp Uhp 125mm | 1 |
E1-16-1 Pump, &, Hoses
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 14***8D | Washer, M10 | 2 |
| 16***07 | Adapter | 1 |
E1-12-1 Bracket, Lift Hose
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Hardened | 2 |
| 33***15 | Bracket, Lift Hose | 1 |
E1-14-1 Oil Cooler, Hoses And Pipework
| 13***8D | Bolt, M12 X 30 | 2 |
| 13***1D | Nut, M12 | 2 |
| 14***9D | Washer, M12 | 2 |
E1-3-1 Hoses, Transmission, Front - Left
| 33***54 | Hose, Transmission, Front Left Assembly | 1 |
| 33***27 | Hose, 3/4 Bsp Hp 256mm | 1 |
| 33***30 | Hose, 3/4 Bsp Hp 583mm | 1 |
E1-18-1 Hoses, Service
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***0D | Bolt, M8x100 | 3 |
E1-11-1 Hydraulic, 6 In 1
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 8 |
| 13***2Z | Nut | 4 |
| 14***4Z | Washer, Star | 4 |
E1-17-1 Fan Hydraulics, Drive Motor
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 14***7D | Washer, M8 Plain | 12 |
E1-15-2 Hydraulics, Steering, 4ws
| 14***9D | Washer, Hardened | 8 |
| 16***50 | Adaptor | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E1-1-1 Drive Train, Hydraulics
| 13***5D | Setscrew, M8x20 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***36 | Hose, Transmission Rear, Assembly | 1 |
E1-10-2 Hydraulics, Inner, Boom
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
E1-2-1 Clamps, Hose, Left Wheel - Front
| 13***11 | Bolt | 4 |
| 13***14 | Bolt, Hex. Head, M8 X 60 | 1 |
| 13***17 | Bolt, M8x75 | 1 |
E1-10-1 Hose And Pipework, Boom, Inner
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***0Z | Bolt, Nylon Patch, M8x40 | 4 |
E1-4-2 Tranmission, Hoses & Fittings, Rear
| 33***08 | Hose, Clamp Top Plate | 2 |
| 33***09 | Clamp, Screw | 4 |
| 33***43 | Hose, 5/8 Bsp Uhp 750 | 2 |
E1-16-2 Pump, &, Hoses
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***8D | Washer, M10 | 2 |
E1-0-2 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-15-1 Steering, Hydraulic, 4ws
| 14***9D | Washer, Hardened | 8 |
| 16***51 | Adaptor | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E2-20-2 Pump, Drive Pump, Components
| 33***37 | Solenoid, 12v | 1 |
| 33***39 | Kit-Seal, Shaft | 1 |
| 33***77 | 45cc, (Drive Pump) | 1 |
E2-17-1 Pump, Tandem Pump, Components
| 33***64 | Tandem Pump | 1 |
E2-5-1 Motor, Front, L/H - Components
| 33***84 | Cam | 1 |
| 33***85 | Cylinder, Brake | 1 |
| 33***86 | Drum, Brake | 1 |
E2-11-1 Motor, Rear, 4wd 4ws
| 13***9D | Capscrew, M12 X 35lg | 20 |
| 14***9D | Washer, Hardened | 20 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E2-3-1 Motor, Front, Abi - Front L/H Wheel Motor
| 33***38 | Motor, Front Left; Not For Sale Requested Zarina Peck 09/11/09 | 1 |
| 33***04 | Sheathing, Connection | 1 |
| 33***73 | Motor, Front Wheel, Left | 1 |
E2-12-1 Motor, Rear, Components
| 33***81 | Motor, Drive | 1 |
E2-4-1 Motor, Front, R/H - Components
| 33***84 | Cam | 1 |
| 33***85 | Cylinder, Brake | 1 |
| 33***86 | Drum, Brake | 1 |
E2-1-3 Front , Motor, 4wd 4ws
| 13***9D | Screw | 12 |
| 14***1D | Washer, M16 | 16 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
E2-2-1 Motor, Front, Abi - Front R/H Wheel Motor
| 33***35 | Motor, Front Right | 1 |
| 33***04 | Sheathing, Connection | 1 |
E2-20-1 Pump, Drive, Components (Removed By Pi R06640_aa)
| 33***37 | Solenoid, 12v | 1 |
| 33***39 | Kit-Seal, Shaft | 1 |
| 33***77 | 45cc, (Drive Pump) | 1 |
E2-1-2 Motor, Front, 4wd 4ws
| 13***9D | Screw | 12 |
| 14***1D | Washer, M16 | 16 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
E2-6-1 Drive Coupling
| 13***8D | Setscrew, M10 X 30 | 8 |
| 13***9D | Bolt, M14 X 35mm | 2 |
| 14***8D | Washer, M10 | 8 |
E2-1-1 Motor, Front, 4wd 4ws
| 13***9D | Screw | 12 |
| 14***1D | Washer, M16 | 16 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E3-40-2 Valve Assembly, Valve Block
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 4 |
| 16***56 | Adaptor | 1 |
E3-47-1 Block Assembly, Valve Block, Components - End Section
| 25***62 | Valve, Outlet Body | 1 |
| 33***04 | Kit-Seal | 1 |
| 33***30 | Segment, End Section | 1 |
E3-44-1 Block Assembly, Valve Block, Components - Tilt
| 33***05 | Valve | 1 |
| 33***06 | Kit, Valve | 1 |
| 33***09 | Valve | 1 |
E3-40-3 Block Assembly, Valve Block
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 4 |
| 16***56 | Adaptor | 1 |
E3-30-1 Valve Mounting, Valve Block Mounting
| 13***5D | Setscrew, M8x20 | 1 |
| 13***1D | Setscrew, M8x45 | 2 |
| 13***2D | Setscrew, M8 X 50 | 1 |
E3-2-1 Breather, Assembly, (Hydraulic)
| 22***01 | Clip, Jubilee | 4 |
| 32***43 | Breather, Relief | 1 |
| 33***50 | Breather, Hydraulic | 1 |
E3-46-1 Block Assembly, Valve Block, Components - Steer
| 33***20 | Segment, Steer | 1 |
| 33***21 | Valve | 1 |
| 33***22 | Valve | 1 |
E3-20-1 Filter, Hydraulic
| 33***05 | Cap, Screw-On | 1 |
| 33***06 | Seal | 1 |
| 33***07 | Insert, Inlet Neck | 1 |
E3-45-1 Block Assembly, Valve Block, Components - Boom Ext
| 33***06 | Kit, Valve | 1 |
| 33***09 | Valve | 1 |
| 33***12 | Valve | 1 |
E3-40-1 Valve Assembly, Valve Block
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 4 |
| 16***56 | Adaptor | 1 |
E3-41-1 Block Assembly, Valve Block, Components (Sections)
| 33***48 | Block, Valve, Hydrocan | 1 |
| 33***14 | Segment, Auxiliary | 1 |
| 33***15 | Segment, Lift | 1 |
E3-43-1 Block Assembly, Valve Block, Components - Lift
| 33***05 | Valve | 1 |
| 33***06 | Kit, Valve | 1 |
| 33***07 | Valve | 1 |
E3-10-2 Tranmission, Porting, Block
| 13***5Z | Bolt, M8 X 150 Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
E3-10-1 Transmission, Porting, Block
| 13***5Z | Bolt, M8 X 150 Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
E3-1-1 Tank, Hydraulic
| 13***7D | Setscrew, M8x25 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
E3-11-1 Transmission, Porting, Block, Components
| 25***05 | Orifice | 4 |
| 33***53 | Block, Transmission | 1 |
| 33***67 | Valve, Sequence | 2 |
E3-42-1 Block Assembly, Valve Block, Components - Aux
| 25***62 | Valve, Outlet Body | 1 |
| 33***04 | Kit-Seal | 1 |
| 33***14 | Segment, Auxiliary | 1 |
E4-3-1 Ram, Shovel, 110 X 60
| 25***38 | Valve, Body Check | 1 |
| 25***00 | Cartridge, Counter Balance; Replaces 25/20***00 | 1 |
| 33***83 | Bush, Bi-Metal 50x40x | 1 |
E4-6-1 Trunnion Mountings
| 13***0D | Setscrew | 10 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 33***06 | Ram, Trunnion Mounting | 2 |
E4-2-1 Ram, Extension, 60 X 40
| 25***00 | Cartridge, Counter Balance; Replaces 25/20***00 | 1 |
| 92***32 | Valve, Body Check; Nsp See San 21534 Use Wa Cylinder Only | 1 |
E4-5-1 Ram, Lift, 90 X 60
| 33***83 | Bush, Bi-Metal 50x40x | 1 |
| 33***80 | Ram, Lift 90x60, Assembly | 1 |
| 90***00 | Seal | 2 |
E4-1-1 Rams, Index Page
| 33***77 | Ram, Ext 60x40, Assembly | 1 |
| 33***78 | Ram, Crowd 10x60, Assembly | 1 |
| 33***79 | Ram, Comp 70x40, Assembly | 1 |
E4-7-1 Ram, Steer
| 33***93 | Circlip, Seeger Ring Ak | 2 |
| 33***98 | Ram, Steer | 1 |
| 33***85 | Rod, Assembled | 1 |
E4-4-1 Ram, Compensation, 70 X 40
| 33***49 | Bush, Bi-Metal 50x40x | 1 |
| 33***83 | Bush, Bi-Metal 50x40x | 1 |
| 33***79 | Ram, Comp 70x40, Assembly | 1 |
F Axles, Wheels & Transmission
F1-1-1 Axle, Front, 4wd 4ws
| 13***9D | Bolt, M10 X 35mm Long | 16 |
| 14***8D | Washer, M10 | 16 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 6 |
F1-2-1 Arm, Control
| 33***00 | Bearing, Spherical | 2 |
| 33***04 | Arm, Control, Assembly | 1 |
| 33***45 | Arm, Track Control | 1 |
F1-1-2 Axle, Front, 4wd 4ws
| 13***9D | Bolt, M10 X 35mm Long | 4 |
| 13***0D | Bolt, M10 X 40mm Long | 12 |
| 14***8D | Washer, M10 | 16 |
F2-11-1 Load Control, L.M.I Rear Axle Insert
| 13***1D | Bolt, M10 X 45mm Long | 2 |
| 13***1D | Nut, M10 | 2 |
| 33***74 | Plate, - Lmi | 1 |
F2-1-1 Axle, Rear, 4wd 4ws
| 13***3D | Setscrew | 2 |
| 13***9D | Bolt, M10 X 35mm Long | 16 |
| 13***9D | Capscrew, M12 X 35lg | 2 |
F3-32-1 Wheel & Tyre, Assembly, Multipurpose - Right
| 15***01 | Valve | 1 |
| 33***18 | Wheel, Rim 10 Stud | 1 |
| 33***70 | Tyre 10.5/75-15.3 Mi | 1 |
F3-20-1 Wheel & Tyre, Sand And Turf (Ga)
| 33***66 | Abi Wheel & Tyre- | 4 |
F3-2-1 Wheel & Tyre, Front - Standard, Right Side
| 15***01 | Valve | 1 |
| 33***98 | Tyre, 255/75-15.3 Agri | 1 |
| 33***05 | Tyre, And Wheel, Assembly | 1 |
F3-11-1 Rear Wheel Assembly, Obsolete Epi R06439_aa
| 33***05 | Tyre, And Wheel, Assembly | 1 |
| 33***06 | Tyre, And Wheel, Assembly | 1 |
F3-1-1 Front Wheel Assembly, Obsolete Epi R06439_aa
| 33***09 | Wheel, Front, Assembly | 1 |
| 33***05 | Tyre, And Wheel, Assembly | 1 |
| 33***06 | Tyre, And Wheel, Assembly | 1 |
F3-12-1 Wheel & Tyre, Rear, Right Side - Obsolete Epi R06439_aa
| 15***01 | Valve | 1 |
| 33***98 | Tyre, 255/75-15.3 Agri | 1 |
| 33***15 | Wheel, Rim Stud | 1 |
F3-21-1 Wheel & Tyre, Assembly, (Sand And Turf)
| 15***01 | Valve | 1 |
| 33***18 | Wheel, Rim 10 Stud | 1 |
| 33***65 | Tyre 10../75-15.3 (S | 1 |
F3-3-1 Wheel & Tyre, Front - Standard, Left Side
| 15***01 | Valve | 1 |
| 33***98 | Tyre, 255/75-15.3 Agri | 1 |
| 33***06 | Tyre, And Wheel, Assembly | 1 |
F3-40-1 Wheel & Tyre, Standard Ga
| 33***05 | Tyre, And Wheel, Assembly | 2 |
| 33***06 | Tyre, And Wheel, Assembly | 2 |
F3-13-1 Wheel & Tyre, Rear, Left Side - Obsolete Epi R06439_aa
| 15***01 | Valve | 1 |
| 33***98 | Tyre, 255/75-15.3 Agri | 1 |
| 33***15 | Wheel, Rim Stud | 1 |
F3-30-1 Wheel & Tyre, Multi-Purpose Ga
| 33***71 | Abi Wheel-Tyre Multi | 2 |
| 33***73 | Abi Wheel-Tyre Multi | 2 |
F3-31-1 Wheel & Tyre, Assembly, Multipurpose - Left
| 15***01 | Valve | 1 |
| 33***18 | Wheel, Rim 10 Stud | 1 |
| 33***70 | Tyre 10.5/75-15.3 Mi | 1 |
G Brakes
G1-2-1 Hoses, Brake
| 33***90 | Pipe, Brake | 1 |
| 33***46 | Pipe, Brake, Hub Left | 1 |
| 33***48 | Cover, Brake Hose | 1 |
G1-11-1 Pedal Control, Brake, Components
| 33***82 | Brake, Pedal | 1 |
| 33***99 | Brake, Pedal Abi | 1 |
| 83***65 | Bush | 1 |
G1-1-1 Brake, Handbrake
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
G1-10-1 Pedal Control, Brake
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***0D | Setscrew, M10 X 40mm | 1 |
G1-4-1 Master Cylinder
| 13***2Z | Nut | 1 |
| 15***00 | Cylinder, Master | 1 |
| 52***02 | Pin, Clevis | 1 |
G2-1-1 Reservoir, Brake, Fluid
| 13***2D | Nut, Thin 1/2in Unf | 1 |
| 14***4D | Washer, Lock 1/2" | 2 |
| 15***00 | Reservoir, Brake Fluid | 1 |
H Steering
H1-1-1 Steering Column
| 13***07 | Bolt | 8 |
| 13***2Z | Nut | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
H1-2-1 Steering Wheel
| 33***11 | Knob, Spinner | 1 |
| 33***04 | Steering, Wheel-Soft | 1 |
| 33***29 | Steering, Wheel, Assembly | 1 |
H1-1-2 Steering Column
| 13***07 | Bolt | 8 |
| 13***2Z | Nut | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
H2-1-1 Steering, Orbitrol
| 16***50 | Adaptor | 1 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 16***63 | Adaptor | 2 |
H2-2-1 Steering, Orbitrol Components
| 33***31 | Kit, Seal; San 10***22, Use On 33***21 | 1 |
| 33***21 | Steering, Orbitrol | 1 |
M Engine, Deutz D2009 L04 Tier3
M1-7-1 Camshaft, & Timing Gears
| 02***54 | Bearing | 2 |
| 02***55 | Gear, Idler | 1 |
| 02***56 | Shaft, Idler Gear | 1 |
M1-6-1 Flywheel, Assembly
| 02***65 | Flywheel | 1 |
| 02***66 | Gear, Flywheel Ring | 1 |
| 02***67 | Bolt | 6 |
M1-5-1 Timing Case & Covers
| 02***08 | Bolt, Hex Head M8x20 | 1 |
| 02***23 | Pin | 2 |
| 02***43 | Casing, Timing | 1 |
M1-3-1 Crankshaft Assembly
| 02***08 | Bolt, Hex Head M8x20 | 7 |
| 02***25 | Crankshaft | 1 |
| 02***26 | Screw, Pan Head M8x40 | 2 |
M1-1-1 Engine, Complete Deutz D2009 L04 36kw 4cyl
| 33***40 | Engine, Assembly | 1 |
| 33***21 | Engine, Deutz D2009 L04 36kw 4 Cylinder | 1 |
M1-2-1 Block Assembly
| 02***13 | Plug, Core | 9 |
| 02***14 | Plug, Core | 4 |
| 02***15 | Bearing, Main | 1 |
M2-5-1 Bracket, Engine Lifting
| 02***05 | Bolt, Hex Head M8x16 | 4 |
| 02***08 | Bolt, Hex Head M8x20 | 2 |
| 02***87 | Bracket, Engine Lifting | 1 |
M2-2-1 Valve, Rocker Assembly
| 02***92 | Lever, Rocker | 1 |
| 02***93 | Bearing, Rocker Lever | 8 |
| 02***94 | Screw, Flanged Head | 1 |
M2-4-1 Rocker Cover
| 02***45 | Bolt, Hex Head M8x50 | 10 |
| 02***69 | Cover, Rocker | 1 |
| 02***71 | Pipe, Breather | 1 |
M2-1-1 Cylinder Head
| 02***19 | Plug | 2 |
| 02***21 | Plug | 1 |
| 02***75 | Head, Cylinder Assemby | 1 |
M2-3-1 Valve, Tappets & Push-Rods
| 02***95 | Rod, Push | 8 |
| 02***96 | Tappet | 8 |
M3-1-1 Exhaust System
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***8D | Washer, M10 | 8 |
M3-3-1 Air Filter, Components
| 32***04 | Valve, Vaccuator | 1 |
| 32***48 | Element, Main, Air Filter | 1 |
| 32***49 | Element, Safety, Air Filter | 1 |
M3-2-2 Air Filter, 4cyl
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 6 |
M3-4-1 Manifold, Induction
| 02***52 | Bolt, Hex Head M8x70 | 9 |
| 02***97 | Gasket | 1 |
| 02***98 | Pipe, Breather | 1 |
M3-5-1 Manifold, Exhaust
| 02***45 | Bolt, Hex Head M8x50 | 8 |
| 02***02 | Gasket | 1 |
| 02***03 | Gasket | 2 |
M3-2-1 Air Filter
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 6 |
M4-4-1 Combination Cooler
| 33***50 | Radiator, Core | 1 |
| 33***51 | Tank, Header | 1 |
| 33***52 | Tank, Header | 1 |
M4-6-1 Thermostat & Housing
| 02***84 | Bolt, Hex Head M8x25 | 2 |
| 02***90 | Connector | 1 |
| 02***91 | O Ring | 1 |
M4-1-1 Fan, (Direct Fan)
| 13***5D | Screw, 5/16 X 7/8" | 4 |
| 13***3D | Setscrew | 4 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
M4-2-1 Cooler Hoses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***7D | Setscrew, M8x25 | 4 |
| 13***03 | Nut | 2 |
M4-11-1 Oil Cooler
| 13***8D | Setscrew, M8 X 30mm | 8 |
| 13***3D | Nut, Self Lock M8 | 8 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
M4-3-1 Radiator & Fittings
| 13***3D | Setscrew, M10 X16mm | 8 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
| 13***3D | Nut, Self Lock M10 | 5 |
M4-10-1 Fan, (Viscous)
| 13***1D | Screw, Set M6x12 | 4 |
| 13***7D | Screw | 3 |
| 13***8D | Screw, M8x30 | 1 |
M4-11-2 Oil Cooler
| 13***8D | Setscrew, M8 X 30mm | 6 |
| 13***3D | Bolt, M8 X 55mm | 2 |
| 13***3D | Nut, Self Lock M8 | 8 |
M4-5-1 Water Pump
| 02***46 | Bolt, Hex Head M8x30 | 3 |
| 02***52 | Bolt, Hex Head M8x70 | 5 |
| 02***07 | Pulley, Water Pump | 1 |
M5-4-1 Filter, Oil
| 02***45 | Bolt, Hex Head M8x50 | 1 |
| 02***27 | Connector | 1 |
| 02***28 | O Ring | 2 |
M5-1-1 Oil Level Dipstick
| 02***21 | Dipstick | 1 |
| 02***22 | O Ring | 1 |
| 02***23 | Plug | 1 |
M5-2-1 Oil Sump
| 02***08 | Bolt, Hex Head M8x20 | 26 |
| 02***11 | Sump, Oil | 1 |
| 02***12 | O Ring | 8 |
M5-3-1 Oil Pump, And Relief Valve
| 02***53 | Valve, Oil Pressure, Regulator | 1 |
| 02***24 | Gear | 1 |
| 02***25 | Pump, Oil | 1 |
M6-1-1 Fuel Filter, And Low Pressure Hoses
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 6 |
M6-5-1 Fuel Lift Pump
| 02***05 | Bolt, Hex Head M8x16 | 4 |
| 02***62 | O Ring | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
M6-4-1 Fuel Injector
| 02***59 | Washer | 4 |
| 02***60 | Clamp | 4 |
| 02***61 | Bolt, Torx Head | 4 |
M6-2-1 Fuel Filter, Assembly, Engine
| 02***36 | Bolt, M10x25 Hex Head | 2 |
| 32***72 | Filter, Fuel Element, Cartridge | 1 |
| 32***73 | Head, Fuel Filter | 1 |
M6-3-1 Pipework, Fuel, High Pressure
| 02***09 | Bolt, Hex Head | 2 |
| 02***35 | Clamp | 1 |
| 02***41 | Pipe, Injection No.1 | 1 |
M6-6-1 Fuel Injection Pump
| 02***46 | Bolt, Hex Head M8x30 | 3 |
| 02***64 | Gear, Fuel Injection | 1 |
| 02***38 | Nut | 2 |
M7-3-1 Switches & Senders
| 02***10 | Rail, Glow Plug Connector | 1 |
| 02***12 | Nut, Locking | 4 |
| 70***68 | Switch, Oil Pressure | 1 |
M7-1-1 Starter Motor
| 02***01 | Sleeve, Rubber | 1 |
| 02***02 | Bolt, Hex Head M10x45 | 2 |
| 71***16 | Motor, Starter | 1 |
M7-2-1 Alternator, 12 Volt
| 02***05 | Bolt, Hex Head M8x16 | 3 |
| 02***06 | Bracket, Alternator Support | 1 |
| 02***07 | Lever | 1 |
Frequently asked questions
What engine does the JCB 515-40 Miniscopic use?
The JCB 515-40 Miniscopic is powered by a 50 hp Deutz 2.3-liter four-cylinder engine.
What is the operating weight of the JCB 515-40 Miniscopic?
The operating weight of the JCB 515-40 Miniscopic is 3,480 kg (7,672 lb).
What model replaced the JCB 515-40 Miniscopic?
The provided sources do not specify a direct successor model to the JCB 515-40 Miniscopic.
What MiniScopic (ROW)(MiniScopic (ROW)) owners discuss
What are the known powertrain and hydraulic behaviors for the JCB Miniscopic (ROW)?
The Miniscopic utilizes a hydrostatic transmission with 4-wheel drive and 4-wheel steering. The hydraulic system operates at 230 bar with a flow rate of 48 liters per minute. The machine is powered by a 50 hp (37 kW) 4-cylinder, 2.3-liter Deutz engine. The offset single-spline chassis arrangement places the chassis on the right-hand side directly under the boom to maintain a height of 1.8 meters and width of 1.56 meters. The machine can handle a 1,500 kg payload at a 4-meter lift height. Variations in travel speed (25 to 40 km/h) depend on tire and transmission combinations. The hydraulic system capacity varies by configuration and series.
What undercarriage or wear patterns are typical for this machine type?
The Miniscopic is a wheeled telehandler, not a crawler excavator, and therefore does not have a track undercarriage. It utilizes standard pneumatic tires. Wear patterns associated with this machine type typically involve the hydrostatic transmission components, hydraulic hoses, and the offset chassis pivot points. The machine's compact design and low center of gravity are engineered to reduce ground pressure, but the offset chassis requires careful monitoring of the spine chassis alignment and hydraulic lines running along the structure.
What are the engine quirks per series for the JCB Miniscopic (ROW)?
The Miniscopic is equipped with a 50 hp (37 kW) 4-cylinder, 2.3-liter Deutz engine. This engine is designed for low headroom applications, such as stock farms and poultry/pig farming sheds. The engine is coupled with a hydrostatic transmission. Specific quirks include the need for proper glow plug cycling during cold weather starts to prevent black smoke from unburned fuel. The engine requires JCB 10W/30 multigrade oil for the first 100 hours of operation when new or reconditioned, after which it must be replaced with the recommended lubricant. The engine is Tier 4 compliant in later models.
What are common electrical or sensor issues reported for the Miniscopic (ROW)?
Common electrical issues include failures in the forward/reverse microswitches that activate hydraulic solenoids on the transmission body. Operators may experience intermittent forward operation or a failure to start if the inhibitor switch (which disables the starting system when in gear) is faulty or has bridged wires. The machine features an automatic eye-level audio-visual load moment indicator warning system that receives signals from a load sensor on the rear axle; failure of this sensor can lead to inaccurate stability monitoring. Wiring harnesses, particularly in older models, may suffer from corrosion or disconnection at the solenoid connections under the cab.
What should be checked when buying a used Miniscopic (ROW)?
When purchasing a used Miniscopic, verify the operation of the forward and reverse hydraulic solenoids by checking for magnetic attraction with a screwdriver blade when the shuttle lever is engaged. Inspect the inhibitor switch for bridged wires or corrosion. Check the hydraulic fluid level and condition, as air ingress in the hydraulic system can occur in freezing temperatures if seals are degraded. Verify the functionality of the load moment indicator sensor on the rear axle. Inspect the offset chassis for alignment issues and check the hydraulic hoses for wear, particularly those running along the spine chassis. Ensure the hydrostatic transmission shifts smoothly without hesitation or jerking.
What are the fluid specifications for the JCB Miniscopic (ROW)?
The Miniscopic requires JCB branded fluids or verified equivalents. For the engine, use JCB 10W/30 multigrade oil for the first 100 hours, then switch to the recommended lubricant per the operation and maintenance manual. The hydraulic system uses low viscosity hydraulic fluid, such as AW46. The transmission and final drives require specific gear oil. Grease points should be lubricated with lithium-based, NLGI No. 2 consistency grease. The total hydraulic system capacity varies by configuration and series.
What safety-critical fix is associated with the load moment indicator?
The automatic eye-level audio-visual load moment indicator warning system is safety-critical. It continuously monitors the machine’s forward stability using a signal from a load sensor on the rear axle. If the sensor fails or the system is bypassed, the operator loses critical stability warnings. Have your dealer verify the load sensor calibration and wiring integrity to ensure the warning system functions correctly before operation.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb MiniScopic (ROW)(MiniScopic (ROW)). Related factory variants of the same model family:
MiniScopic (ROW)(MiniScopic (ROW))
Need a specific MiniScopic (ROW)(MiniScopic (ROW)) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.