JCBconstructionmini backhoe
Jcb MINI CX-2WD(Foot Operated F/R)
Maintenance schedule, common problems & OEM parts breakdown
The JCB MINI CX is a compact backhoe loader manufactured from 2004 to 2009, weighing 1.53 tons (3,373 lb). It is powered by a 20 hp (15 kW) Perkins three-cylinder engine and features a single-speed hydrostatic transmission with two-wheel drive. The machine offers a maximum transport height of 2.12 m (6.96 ft) and a transport width of 1.47 m (4.82 ft). Configurations include foot-operated forward/reverse controls and a static mounted seat that swivels for loader or backhoe operation. The MINI CX succeeded earlier mini-backhoe models and was replaced by the JCB 3CX series in the compact backhoe market.
Across its production run, the MINI CX maintained a consistent chassis and powertrain layout, with minor updates to emissions compliance and operator comfort. The machine remains relevant in the used market due to its simple mechanical controls, low operating weight for tight access, and durable Perkins engine. Parts availability is supported by JCB and third-party suppliers, with specific service intervals that differ from larger JCB backhoes. The MINI CX is distinct from the MINI CX 4x4 and the Micro Tier 3, which share serial number ranges but differ in drive configuration and emissions tier.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb MINI CX-2WD(Foot Operated F/R) specifications
Engine
| Model | 103-10 |
| Manufacturer | Perkins |
| Number of Cylinders | 3 |
| Displacement | 58.3 cu in (0.96 L) |
| Net Power | 15 kW (20 hp) |
| Gross Power | 20.5 hp (15.3 kW) |
| Power Measured @ | 2800 rpm |
| Net Max Torque | 41.5 lb ft (56.3 Nm) |
| Torque Measured @ | 2800 rpm |
| Aspiration | Naturally Aspirated |
Weights
| Operating Weight (2WD) | 3373 lb (1530 kg) |
Dimensions
| Transport Length | 14.87 ft (4.53 m) |
| Transport Width | 4.83 ft (1.47 m) |
| Transport Height | 6.98 ft (2.12 m) |
| Wheelbase | 5.12 ft (1.56 m) |
| Height to Top of Suspended Cab | 6.98 ft (2.12 m) |
| Turning Radius | 19.2 ft (5.84 m) |
Performance
| Max Speed - Forward | 6.2 mph (10 km/h) |
| Max Speed - Reverse | 6 km/h (3.7 mph) |
| Lift Capacity at Full Height | 3444 lb (1562 kg) |
| Bucket Breakout Force | 3607 lb (16.05 kN) |
| Dig Depth - Std | 8.34 ft (2.54 m) |
| Load Height - Std | 6.3 ft (1.92 m) |
| Reach From Swivel - Std | 12.28 ft (3.74 m) |
| Reach at Load Height - Std | 6.65 ft (2.03 m) |
| Clearance at Max Dump Height | 5.69 ft (1.73 m) |
| Reach at Max Dump Height | 3.5 ft (1.07 m) |
| Dig Depth (Loader) | 2.56 in (65 mm) |
Service capacities (summary)
| Fuel Tank Capacity | 7.7 gal (29 L) |
| Hydraulic System Fluid Capacity | 14.1 gal (53 L) |
| Oil System Fluid Capacity | 0.9 gal (3.5 L) |
| Cooling System Fluid Capacity | 1 gal (3.7 L) |
| Rear Axle Fluid Capacity | 0.4 gal (1.5 L) |
| Bucket Capacity | 0.3 yd³ (0.23 m³) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
MINI CX-2WD(Foot Operated F/R) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 3.7 L (0.81 US gal) | JCB 15W/40 Multigrade Engine Oil (-10°C to 50°C / 14°F to 122°F) |
| Cooling System | 3.7 L (0.81 US gal) | JCB Coolant (Ethylene Glycol based) |
| Fuel Tank | 29.1 L (7.69 US gal) | Diesel Oil |
| Transmission/Hydrostatic System | 11.1 L (2.5 US gal) | JCB Super Universal Agricultural Fluid |
| Hydraulic System and Tank | 11.1 L (2.5 US gal) | JCB Hydraulic Oil (AW46 equivalent) |
| Grease | N/A | JCB Blue Grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb MINI CX-2WD(Foot Operated F/R) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the MINI CX-2WD(Foot Operated F/R) beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil, hydraulic oil, and axle oil levels daily. Use JCB 15W/40 Multigrade oil for the engine and JCB Super Universal Agricultural oil for the transmission and hydraulics. Check the hydraulic return filter magnet at 250 hours for metallic debris. Perform oil sampling at 500 hours to establish a baseline for engine, hydraulic, and axle systems. Inspect coolant level in the expansion tank daily to prevent silicate separation. Verify fuel filter condition to protect the Perkins engine injectors.
Corrective & Common Repairs
Address hydraulic leaks at the kingpost and boom pivot fittings promptly. Replace worn loader arm pins and bushes to maintain structural integrity. Inspect the hydrostatic transmission drive belts for tension and wear. Check the stabilizer legs for proper extension and pivot wear. Replace the air filter element when the restriction indicator signals. Verify the operation of the foot-operated forward/reverse pedal and brake engagement.
Overhaul & Rebuild Points
At 1,000 hours, replace hydraulic oil and clean the tank. Inspect the turbocharger shaft play and charge cooler boot condition. Check the injector spray patterns using a diagnostic tool. Measure the swing ring play on excavator configurations. Torque the slew ring bolts to specification. Inspect the structural frame for cracks or unauthorized welding. Service the immersed brake system and replace worn brake discs.
Seasonal & Environment Servicing
In cold weather, cycle glow plugs for 10-15 seconds before starting. Use JCB 10W/30 Multigrade oil for the first 100 hours of a new or reconditioned engine. Check battery electrolyte levels and terminal condition. Inspect hoses and cylinders for chafing or scoring in dusty environments. Grease all pivot points more frequently in wet or muddy conditions. Verify the operation of the backup alarm and ROPS/FOPS structure.
MINI CX-2WD(Foot Operated F/R) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/401102 | Kit-Element, Fuel Filter, Short | Fuel system service | Check fitment → |
| 32/919902 | Element, Air Filter | Air intake service | Check fitment → |
| 02/630925 | Element, Oil Filter | Lubrication service | Check fitment → |
| 32/925346 | Element, Hydraulic Filter, 12 Micron,229mm Long | Scheduled service item | Check fitment → |
| 581/18089 | Filter, Assembly | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
MINI CX-2WD(Foot Operated F/R) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Leaking fuel injector, faulty fuel pressure regulator, or weak lift pump. | Check fuel lines for leaks and verify lift pump operation. |
| P0088 | Fuel rail/system pressure too high | Faulty fuel pressure regulator or restricted fuel return line. | Inspect fuel return lines for blockages and test regulator function. |
| P0115 | Engine coolant temperature sensor circuit malfunction | Failed coolant temperature sensor, open circuit, or poor ground connection. | Inspect sensor wiring harness and connector for damage or corrosion. |
| P0117 | Engine coolant temperature sensor low signal | Short to ground in the coolant temperature sensor circuit. | Check wiring harness for chafing or short circuits near the engine block. |
| P0118 | Engine coolant temperature sensor high signal | Open circuit in the coolant temperature sensor wiring. | Verify sensor connection and check for broken wires in the harness. |
| P0200 | Injector circuit malfunction (general) | Open or shorted circuit in the injector wiring harness. | Visually inspect injector connectors and wiring for damage. |
| P0201 | Injector circuit open – 1st cylinder | Broken wire or poor connection at the first cylinder injector. | Check the injector connector and wiring path for the first cylinder. |
| P0335 | Crankshaft position sensor 'A' circuit no signal | Failed crankshaft position sensor or damaged tone wheel. | Inspect the sensor gap and wiring for damage or contamination. |
| P0340 | Camshaft position sensor circuit malfunction | Faulty camshaft position sensor or timing chain/belt issues. | Check sensor operation and verify engine timing alignment. |
| P0236 | Turbocharger boost sensor circuit range/performance | Faulty boost pressure sensor or vacuum leak in the boost control system. | Inspect boost sensor wiring and check for vacuum leaks in hoses. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
MINI CX-2WD(Foot Operated F/R) attachments & work tools
Loader Buckets
Standard buckets for this class typically range from 0.20 to 0.25 m³ (0.26 to 0.33 yd³) capacity. The machine's rated operating capacity is 1,488 lbs (675 kg), which dictates the maximum safe payload for loader attachments.
Backhoe Buckets
Standard digging buckets for this size class typically have a width of approximately 1.51 m (59.4 in) and a capacity of 0.25 m³ (0.33 yd³). The backhoe provides a standard maximum dig depth of 2.54 m (8 ft 4 in) and a maximum reach of 3.74 m (12 ft 3 in).
Quick Couplers
The machine utilizes a mechanical pin grab style quick coupler system for attachment changes. Aftermarket options include autolock mechanical pin grabs compatible with the JCB mini excavator and backhoe lineages.
Hydraulic Tools
Compatible hydraulic work tools include breakers, mulchers, and hydraulic thumbs. These attachments require a high-flow or standard-flow hydraulic circuit arrangement to operate effectively from the machine's load-sensing system.
Specialty Attachments
Available attachments include pallet forks, ripper teeth for breaking compacted earth, and tillers for soil mixing. Dual hitch designs allow for center or offset mounting to facilitate operation next to buildings or obstacles.
Guarding & Safety
Factory configurations include leg stabilizer guards (WA) to protect the stabilizer legs. The machine features a static mounted seat that is adjustable and easily rotated for loader or backhoe operation, with ergonomically placed controls to minimize fatigue.
All MINI CX-2WD(Foot Operated F/R) assemblies by section
Every catalogued assembly group for the Jcb MINI CX-2WD(Foot Operated F/R). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-4-1 Shovel Gp, 0.25 Cu.M, 980/90280, 1480mm Wide,Quickhitch Mounted
| 33***44 | Strip, Side Wear | 2 |
| 33***45 | Strip, Bottom Wear | 3 |
| 33***50 | Toeplate, 1450mm X 150mm, Plain Without Holes | 1 |
A1-2-1 Shovel 4 In 1 Clam, 980/89807,980/89915, Direct Mounted
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
A1-1-1 Shovel Gp, 0.25 Cu.M, 980/89805, 1470mm Wide,Direct Mounted
| 33***44 | Strip, Side Wear | 2 |
| 33***45 | Strip, Bottom Wear | 3 |
| 33***50 | Toeplate, 1450mm X 150mm, Plain Without Holes | 1 |
A1-2-10 Shovel 4 In 1 Clam, 332/S6585, Direct Mounted
| 13***2D | Bolt | 4 |
| 13***4D | Bolt | 2 |
| 13***1D | Nut, M8 | 8 |
A1-4-10 Shovel Gp, 0.25 Cu.M, 332/S9210, 1480mm Wide,Quickhitch Mounted
| 13***1Z | Nut | 9 |
| 13***2D | Screw, Cap | 9 |
| 14***1Z | Washer, M16 Plain | 9 |
A1-3-10 Shovel,4 In 1 Clam, 332/S8997, Quick Hitch Mounted
| 13***2D | Bolt | 4 |
| 13***4D | Bolt | 2 |
| 13***1D | Nut, M8 | 8 |
A1-3-1 Shovel,4 In 1 Clam, 980/90279, Quick Hitch Mounted
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
A2-4-1 Bucket, Grave Digging
| 13***1Z | Nut | 10 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 5 |
| 52***08 | Sidecutter, Right Hand | 1 |
A2-1-1 Bucket, General Purpose
| 13***1Z | Nut | 0 |
| 52***00 | Bucket, 230mm | 1 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 0 |
A2-2-1 Bucket, Ditch Cleaning
| 52***00 | Bucket, 900mm Ditching | 1 |
| 52***00 | Bucket, Ditching, 1000mm | 1 |
| 52***00 | Bucket, 760mm Ditching | 1 |
A2-3-1 Bucket, Dual Purpose
| 13***1Z | Nut | 6 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 3 |
| 52***08 | Sidecutter, Right Hand | 1 |
A2-1-10 Bucket, General Purpose
| 13***4Z | Bolt | 2 |
| 13***1Z | Nut | 0 |
| 52***00 | Bucket, Assembly, 460mm | 1 |
A3-2-1 Quickhitch, 331/54745
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
| 13***7D | Bolt, M12 X 75mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 4 |
A3-1-10 Fork Frame And Forks, 332/S9329, Quick Hitch Mounted
| 33***29 | Frame, Assembly, Qh Style | 1 |
| 33***16 | Fork, Wa | 2 |
| 33***68 | Frame, Wa | 1 |
A3-1-1 Fork Frame And Forks, 980/90278, Qhick Hitch Mounted
| 33***62 | Fork, Fixed | 2 |
| 98***78 | Frame, Assembly,Forks, Sae Qh Style | 1 |
B Bodywork, Cab, Loader End
B1-4-15 Lock,Striker, Bonnet,4wd
| 13***5D | Setscrew, M8x20 | 2 |
| 13***1D | Nut, M10 | 1 |
| 13***2D | Nut, Thin | 1 |
B1-5-15 Street Pads, Sideshift, Option
| 13***3D | Nut, Self Lock M8 | 8 |
| 13***8D | Capscrew | 8 |
| 14***7D | Washer, M8 Plain | 8 |
B1-2-1 Tank, Hydraulic
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
B1-3-1 Tank, Diesel Fuel
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
B1-7-1 Mounting Plate, Excavator Valve
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 33***95 | Plate, Valve Mounting, Sideshift | 1 |
B1-9-1 Fenders
| 13***7D | Setscrew, M8x25 | 13 |
| 13***8Z | Bolt | 8 |
| 13***9D | Bolt, M10 X 35mm Long | 2 |
B1-10-1 Belly Guard Plate
| 13***7D | Setscrew, M8x25 | 6 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***7D | Washer, M8 Plain | 12 |
B1-5-5 Frame,Rear, Centremount, 4wd
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***9D | Bolt | 6 |
B1-6-1 Stabiliser, Leg Guards, Centremount
| 13***5D | Setscrew, M8x20 | 8 |
| 14***7D | Washer, M8 Plain | 8 |
| 33***04 | Guard, Leg Wa | 2 |
B1-1-10 Chassis, Front Axle Mounting, 4wd
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8Z | Bolt, M10x80 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
B1-4-10 Bonnet, 4wd
| 13***8Z | Bolt | 2 |
| 13***1D | Screw, Set M6x12 | 1 |
| 13***7D | Setscrew, M8x25 | 6 |
B1-5-1 Stabiliser, Centremount
| 13***4D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
B1-8-20 Footplate
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 8 |
B1-5-10 Frame, Rear, Stabiliser, Sideshift
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
| 13***5D | Setscrew, M8x20 | 6 |
| 13***7D | Setscrew, M8x25 | 2 |
B1-4-1 Bonnet, 2wd
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 1 |
| 13***3D | Nut, Self Lock,7/16" Unc | 1 |
B1-8-1 Floor Plates, Front Bumper
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Screw, M12x35mm Long | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
B1-3-2 Tank, Diesel Fuel
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
B1-1-1 Chassis, Axle/Step Mountings
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
| 13***8D | Bolt, M10 X 80 | 1 |
B1-2-10 Tank, Hydraulic
| 13***5D | Setscrew, M8x20 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
B1-1-0 Serial Number, Machine Data, Location
B1-8-10 Floorplates, 4wd
| 14***7D | Washer, M8 Plain | 4 |
| 33***59 | Plate, Cover | 1 |
| 33***87 | Floorplate, 4wd | 1 |
B2-4-1 Cover, Excavator Valve
| 14***7D | Washer, M8 Plain | 5 |
| 33***70 | Plate, Gaitor | 1 |
| 34***21 | Cover, Excavator Valve | 1 |
B2-3-1 Seat, Vinyl,Swivel
| 13***7D | Capscrew | 4 |
| 34***44 | G.A. | 0 |
| 40***15 | Seat, Assembly, Swivel/Adjust, Mini Cx | 1 |
B2-4-15 Cover, Excavator Valve, Dual Pattern (Iso/Sae) Option
| 12***14 | Gaiter, Excavator Control | 2 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***44 | Plate, Blanking,Auxiliary | 1 |
B2-5-1 Support, Dashboard
| 13***5D | Setscrew, M8x20 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***59 | Bracket, Support,Dashboard | 1 |
B2-3-2 Seat, Vinyl, Swivel
| 13***7D | Capscrew | 4 |
| 33***39 | Seat, Rotating, Mini Cx | 1 |
B2-5-5 Guard, F-N-R Lever
| 33***30 | Guard, F-N-R Lever | 1 |
| 34***11 | G.A. | 0 |
| 82***21 | Screw, Button Head M6x20, Stainless | 2 |
B2-2-1 Softcab Kit
| 33***76 | Kit, Softcab Assembly | 1 |
| 72***82 | Harness, Link,Wiper, Soft Cab | 1 |
B2-1-1 Canopy
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, M16 Self Locking | 6 |
| 13***12 | Screw, Cap; Replaces 60***12, San 13331 | 6 |
B2-1-10 Canopy
| 13***3D | Nut, M16 Self Locking | 6 |
| 13***12 | Screw, Cap; Replaces 60***12, San 13331 | 6 |
| 24***09 | Grommet | 1 |
B2-4-10 Cover, Excavator Valve
| 12***14 | Gaiter, Excavator Control | 2 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***12 | Cover, Excavator Valve | 0 |
B3-1-10 Arms,Loader, Parallel Lift, 4wd
| 13***7D | Bolt, M8 X 75mm Long | 2 |
| 13***8D | Bolt, M8 X 80mm | 2 |
| 13***9D | Bolt, Special M8x90 | 2 |
B3-1-1 Arms,Loader, Standard Lift, 2wd
| 14***26 | Shim, 0.5mm | 0 |
| 14***28 | Shim, 1.5mm | 0 |
| 33***45 | Collar, Locking | 4 |
B3-1-5 Arms,Loader, Standard Lift, 4wd
| 12***40 | Plug, Blanking, 30mm | 2 |
| 13***9D | Bolt, Special M8x90 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
B3-3-1 Safety Strut
| 13***2D | Nut, Thin | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***57 | Strap | 1 |
B4-3-10 Dipper, Extending
| 13***08 | Bolt, M10 X 30 | 8 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Nut | 8 |
B4-1-10 Kingpost & Carriage, Sideshift
| 13***08 | Capscrew, M12 X 30 | 3 |
| 13***0D | Capscrew | 6 |
| 13***12 | Screw, Cap; Replaces 60***12, San 13331 | 8 |
B4-4-10 Boom Lock, Sideshift
| 13***3D | Nut, Self Lock M10 | 1 |
| 13***3D | Nut, M12 | 1 |
| 14***8D | Washer, M10 | 1 |
B4-4-1 Boom Lock
| 12***73 | Fastener, Anti-Luce | 1 |
| 13***6D | Bolt, M12 X 160 | 1 |
| 13***1D | Nut, M8 | 1 |
B4-5-1 Slew Lock, Pin, Side Shift
| 13***0D | Bolt, M8x40 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
B4-3-1 Dipper, Fixed
| 13***5D | Bolt, M10x65 | 4 |
| 13***7Z | Bolt | 2 |
| 13***3D | Nut, Self Lock M10 | 4 |
B4-2-1 Boom
| 13***5D | Bolt, M10x65 | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
| 14***26 | Shim, 0.5mm | 0 |
B4-1-6 Kingpost, Pivot Pins & Bushes
| 13***5D | Bolt, M10x65 | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
B4-1-1 Kingpost
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***1D | Bolt, M6x110 | 2 |
| 13***9D | Bolt | 2 |
B5-1-1 Decals, General
| 81***11 | Label, Sound Pressure, 85 Lpa | 1 |
| 81***26 | Label, Noise, 101 Lwa | 1 |
| 81***29 | Label, Sound Pressure, 104db Lwa | 1 |
B5-2-3 Decals, Safety
| 81***95 | Decal, Warning, Disconnect Battery | 1 |
| 81***87 | Decal, Tie Down (Chain) | 4 |
| 81***51 | Reflector, Self Adhesive | 2 |
B5-2-1 Decals & Insignia, Identity, Mini Cx, Series Ii,2wd
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 14***6Z | Washer, M6 | 3 |
| 81***61 | Decal, Jcb, Black, 250mm Wide | 1 |
B5-2-4 Decals, Safety, Usa
| 81***95 | Decal, Warning, Disconnect Battery | 1 |
| 81***87 | Decal, Tie Down (Chain) | 4 |
| 81***51 | Reflector, Self Adhesive | 2 |
B5-2-10 Decals & Insignia, Identity, Mini Cx, Series Ii,4wd
| 81***61 | Decal, Jcb, Black, 250mm Wide | 1 |
| 81***98 | Decal, "Series Ii" | 2 |
| 81***51 | Decal, Jcb, Black, 176mm Wide | 2 |
B5-3-1 Fire Extinguisher, 2.5kg
| 14***6D | Washer, M6 Plain | 2 |
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
| 26***67 | Extinguisher, Fire, Excludes Cradle | 1 |
C Electrics-Machine, Cab & Engine
C1-2-20 Light, Number Plate, Including Bracket
| 29***55 | Bracket, Rear Number Plate | 1 |
| 70***00 | Light, Number Plate | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C1-7-1 Beacon, Hazard Warning, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***03 | Belt, Driven | 1 |
C1-5-1 Instrument Cluster, Front Console
| 33***12 | Plate, Dashboard | 1 |
| 33***94 | Hourmeter, Mechanical, (Rectangular) | 1 |
| 33***76 | Plate, Dashboard | 1 |
C1-1-1 Harnesses, Mainframe And Canopy
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***8D | Setscrew | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
C1-4-1 Switches,Relays, Fuses,Alarm Buzzer
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
C1-4-10 Switches,Relays, Fuses,Alarm Buzzer
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
C1-2-30 Light, Rear
| 70***00 | Light, Rear | 2 |
| 70***01 | Lens | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-8-1 Road Lights, Installation Lh Dip
| 13***5D | Screw, M5x20 | 3 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***3Z | Screw | 1 |
C1-4-20 Switch, Column, Forward/Reverse
| 13***8Z | Bolt | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3Z | Nut | 2 |
C1-2-10 Light, Head, 12.Volt, Left Hand Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
| 70***54 | Light, Head Assembly, Left Hand Dip | 2 |
C1-3-1 Battery Installation, Heavy Duty
| 33***33 | Bolt, Hook M6 X 80mm Long | 1 |
| 33***07 | Tray, Battery | 1 |
| 33***17 | Plate, Battery Retaining | 1 |
C1-6-1 Horn, Installation, Front & Rear
| 13***4Z | Bolt, M10x60 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-2-1 Light, Working
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5D | Setscrew, M10 X 20 | 1 |
| 13***3D | Bolt, M8 X 55mm | 1 |
C1-5-10 Instrument Cluster, Front Console
| 24***09 | Grommet | 1 |
| 33***83 | Plate, Dashboard | 1 |
| 33***94 | Hourmeter, Mechanical, (Rectangular) | 1 |
C1-4-30 Switch, Column, Indicator Switch
| 70***67 | Switch, Left Hand, Indicator | 1 |
C2-4-1 Alternator
| 02***00 | Alternator, 12v-40amp | 1 |
| 02***06 | Rectifier | 1 |
| 02***07 | Holder, Brush Assembly | 1 |
C2-6-1 Autostop, Engine
| 02***38 | Box, Control | 1 |
| 02***39 | Connector | 1 |
| 14***4Z | Washer, Spring; Replaces Khn0424, San 12352 | 2 |
C2-3-1 Motor, Starter
| 71***08 | Kit, Seals | 1 |
| 71***00 | Motor, Starter | 1 |
| 71***02 | Switch, Solenoid | 1 |
C2-2-1 Electrical Equipment
| 02***56 | Switch, Oil Pressure | 1 |
| 02***00 | Solenoid, Fuel Shut-Off | 1 |
| 02***01 | Washer | 1 |
C2-5-1 Alternator Mountings
| 02***08 | Washer | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
| 02***73 | Bracket, Alternator Mounting | 1 |
D Controls-Machine, Engine & Steering
D1-5-1 Controls, Transmission Lock
| 13***8Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
D1-1-10 Control Levers, Excavator Valve
| 12***35 | Knob, Assembly | 2 |
| 13***4D | Setscrew, 1/2 Unf X 3/4 | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
D1-7-1 Controls, Auxiliary Valve, Backhoe, Optional.
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***1D | Bolt, M8x45mm | 3 |
| 13***7D | Bolt, M8 X 75mm Long | 1 |
D1-2-1 Controls, Loader 3 Spool
| 11***16 | Joint, Universal | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***35 | Knob, Assembly | 1 |
D1-7-10 Controls, Auxiliary Valve, Backhoe, Optional.
| 12***02 | Joint, Ball, M8 Right Hand | 1 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***0D | Bolt, M8x40 | 3 |
D1-1-15 Control Levers, Excavator Valve, Dual Pattern Control (Iso/Sae) Option
| 12***35 | Knob, Assembly | 2 |
| 13***4D | Setscrew, 1/2 Unf X 3/4 | 4 |
| 13***3D | Nut, Self Lock M8 | 6 |
D1-5-10 Controls, Inch,Transmission
| 13***7D | Setscrew M5x25 | 1 |
| 13***8D | Screw, M5x30 | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
D1-1-1 Controls, Excavator 6 Spool
| 12***59 | Ring, Tolerance | 2 |
| 12***35 | Knob, Assembly | 2 |
| 13***3D | Setscrew | 4 |
D1-6-1 Control Knob, Loader, Auxiliary Valve, Black And Silver
| 12***59 | Ring, Tolerance | 1 |
| 12***39 | Knob, Assembly | 1 |
| 70***00 | Push Button Black, With Microswitch | 1 |
D1-1-20 Controls, Stabiliser Legs
| 12***94 | Pin, Pivot, Stabiliser | 1 |
| 14***8D | Washer, M10 | 2 |
| 33***75 | Knob, Controls, Black; Replaced By 33***84, See San 13712 | 2 |
D1-1-17 Control Mechanism, Excavator Valve, Dual Pattern Control (Iso/Sae) Option
| 13***8Z | Bolt | 2 |
| 13***0D | Setscrew | 2 |
| 13***7D | Setscrew, M8x25 | 4 |
D1-3-1 Parking Brake
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
| 13***3D | Bolt, M10 X 55mm | 2 |
D2-12-1 Control,Throttle, 2wd/4wd Tier 3
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***8Z | Bolt | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
D2-1-1 Control, Throttle, 2wd Tier 2
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
D2-1-2 Control,Throttle, 4wd Tier 2
| 13***5D | Screw, M5x20 | 4 |
| 13***8Z | Bolt | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
D3-1-1 Steering Column
| 33***49 | Wheel, Steering,Assembly, With Spinner Knob | 1 |
| 33***22 | Cap, Centre; Superseded By 33***29 See San 25795 | 1 |
| 33***23 | Knob, Spinner | 1 |
E Hydraulics & Air Including, Steering
E1-5-10 Circuit, Steering, 4wd
| 16***51 | Adaptor | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 5 |
| 24***05 | O Ring | 1 |
E1-4-11 Circuit, Drive Train, 4wd, Hoses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***3D | Bolt, M8 X 55mm | 4 |
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
E1-9-1 Circuit, Quickhitch, Auxiliary, Loader Arms To 6 In 1 Shovel
| 16***63 | Adaptor | 2 |
| 24***06 | O Ring | 2 |
| 34***07 | Kit, Qh Auxiliary Circuit | 1 |
E1-1-1 Circuit, Neutral, 2wd
| 13***5D | Setscrew, M8x20 | 1 |
| 13***7D | Capscrew | 8 |
| 13***1D | Capscrew | 2 |
E1-8-1 Circuit, Excavator, Auxiliary, C/Mount
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***2D | Capscrew | 2 |
| 14***8D | Washer, M10 | 2 |
E1-7-1 Valve, Purge, Loop Flushing, 2wd
| 13***9D | Bolt, Special M8x90 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
E1-13-1 Circuit, Stabiliser, With Lockout Valves, Sideshift Rearframe
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 4 |
| 24***05 | O Ring | 1 |
| 25***00 | Valve, Stabiliser Check | 2 |
E1-6-8 Circuit, Exc.Valve, Hoses, Centremount
| 34***16 | G.A. | 0 |
| 61***89 | Hose, 1/4"Bsp 1320mm | 2 |
| 61***20 | Hose, 3/8"Bsp 900mm Long | 6 |
E1-8-15 Circuit, Excavator, Auxiliary, Centremount
| 13***5D | Setscrew, M8x20 | 2 |
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 2 |
E1-2-1 Circuit, Loader Arm, Standard
| 13***5D | Setscrew, M8x20 | 6 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
E1-2-20 Circuit, Loader Arm, Parallel Lift
| 13***7D | Setscrew, M8x25 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***03 | Nut | 10 |
E1-8-10 Circuit, Excavator, Auxiliary, Sideshift
| 13***5D | Setscrew, M8x20 | 2 |
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***8D | Bolt, M8x30mm | 2 |
E1-1-10 Circuit, Neutral, 4wd
| 13***7D | Capscrew | 8 |
| 13***1D | Capscrew | 2 |
| 14***6D | Washer, M6 Plain | 8 |
E1-3-1 Circuit, Hydraulic Cooler
| 13***5D | Setscrew, M8x20 | 2 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-6-1 Circuit, Excavator, Slew/Swing, Stabiliser
| 13***1D | Bolt, M8x45mm | 1 |
| 13***07 | Screw, Set | 1 |
| 14***7D | Washer, M8 Plain | 2 |
E1-4-1 Circuit, Drive Motor
| 24***03 | O Ring | 1 |
| 24***07 | O Ring | 2 |
| 29***90 | Kit, Split Flange 3/4 | 2 |
E1-2-30 Circuit, Loader Arm, Parallel Lift + Aux
| 13***7D | Setscrew, M8x25 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***0D | Bolt, M8x100 | 2 |
E1-10-5 Pipework/Fittings, Kingpost, Sideshift
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***03 | Nut | 6 |
E1-4-12 Circuit, Drive Train, 4wd, Adapters
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt, Special M8x90 | 2 |
| 13***2D | Bolt, M8 X 120 Lg | 2 |
E1-6-20 Circuit, Rams, Excavator, Sideshift
| 34***82 | G.A. | 0 |
| 55***53 | Ram, Bucket | 1 |
| 55***55 | Ram, Boom | 1 |
E1-10-1 Pipework/Fittings, Kingpost Carriage, Sideshift
| 13***8D | Bolt, M10 X 80 | 1 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***3D | Nut, Self Lock M10 | 1 |
E1-5-1 Circuit, Steering, 2wd
| 16***51 | Adaptor | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 5 |
| 24***05 | O Ring | 1 |
E1-4-10 Circuit, Drive Train, 4wd, This Page Superseded By E1-4-11,E1-4-12
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Bolt, M8 X 55mm | 4 |
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
E1-2-10 Circuit, Loader Arm, Standard + Auxiliary
| 12***39 | Knob, Assembly | 1 |
| 13***5D | Setscrew, M8x20 | 6 |
| 13***7D | Setscrew, M8x25 | 6 |
E1-6-10 Circuit, Rams, Excavator, Centremnt
| 34***40 | G.A. | 0 |
| 55***53 | Ram, Bucket | 1 |
| 55***55 | Ram, Boom | 1 |
E1-6-5 Circuit, Exc.Valve, Hoses, Sideshift
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 34***85 | G.A. | 0 |
| 61***00 | Hose, 1/4"Bsp X 1430mm; Std Controls. See Page E1-5-2 For Std Control Machines After This Serial Number, Hose, 1/4"Bsp X 1430mm, Hose, 1/4"Bsp X 1430mm; Std Controls. See Page E1-5-2 For Std Control Machines Built After This Serial Number | 1 |
E2-2-15 Pump Components, Transmission 4wd
| 20***16 | Valve, Relief, Boost Pressure | 1 |
| 20***88 | Valve, Relief,Assembly | 1 |
| 20***34 | Coil, Solenoid; Superseded By 71***81 See San 25806 | 1 |
E2-6-1 Motor, Drive Rear Lh 4wd, 20/925793
| 13***3D | Nut, M12 | 10 |
| 13***1D | Capscrew | 10 |
| 20***93 | Motor, Assembly,Lh Rear | 1 |
E2-2-1 Pump Assembly, Transmission 2wd
| 20***93 | Pump, Transmission 2wd | 1 |
| 20***71 | Kit-Seal | 1 |
| 20***22 | Pump, Assembly | 1 |
E2-3-1 Motor, Drive Rear Axle 2wd
| 13***9D | Capscrew, M12 X 35lg | 2 |
| 14***10 | Washer, M14, Hardened | 2 |
| 20***29 | Motor, Drive | 1 |
E2-2-10 Pump Components, Transmission 2wd
| 20***16 | Valve, Relief, Boost Pressure | 1 |
| 20***88 | Valve, Relief,Assembly | 1 |
| 20***22 | Pump, Assembly | 1 |
E2-2-5 Pump Assembly, Transmission 4wd
| 20***46 | Pump, Transmission 4wd | 1 |
| 20***71 | Kit-Seal | 1 |
| 20***23 | Pump, Assembly, Hydraulic | 1 |
E2-1-1 Pump Assembly, Main Hydraulics
| 20***71 | Kit-Seal | 1 |
| 20***23 | Pump, Assembly, Hydraulic | 1 |
| 20***25 | Seal | 1 |
E2-5-1 Motor, Drive Rear Rh 4wd, 20/925792
| 13***3D | Nut, M12 | 10 |
| 13***1D | Capscrew | 10 |
| 20***92 | Motor, Assembly,Rh Rear | 1 |
E2-4-1 Motor, Drive Front 4wd, 20/925791
| 20***91 | Motor, Drive Assembly | 2 |
| 20***87 | Ring, Distributor, Front Motor | 1 |
| 20***92 | Spring, Distributor | 4 |
E3-1-5 Valve, Loader, 2 Spool, Without Auxiliary Circuit
| 25***47 | Body, Outlet | 1 |
| 25***48 | Body, Inlet | 1 |
| 25***49 | Valve, Check | 2 |
E3-10-1 Valve, Steering
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 5 |
| 24***05 | O Ring | 1 |
| 34***81 | Kit-Seal | 1 |
E3-2-50 Valve, Excavator, Boom Section
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***26 | Kit, Control | 1 |
E3-2-40 Valve, Excavator, Slew Section
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***26 | Kit, Control | 1 |
E3-8-1 Lubricants & Filters
| 02***25 | Element, Oil Filter | 1 |
| 32***02 | Kit-Element, Fuel Filter, Short | 1 |
| 32***00 | Strainer, Suction | 1 |
E3-1-2 Valve, Loader, 3 Spool
| 25***47 | Body, Outlet | 1 |
| 25***48 | Body, Inlet | 1 |
| 25***49 | Valve, Check | 2 |
E3-11-1 Valve,Changeover, Loader Auxiliary
| 25***00 | C/O Valve Auxiliary/Sway | 1 |
| 25***01 | Coil, 12v | 1 |
E3-6-1 Valve, Excavator, 6 Spool(Sae Control)
| 25***49 | Valve, Check | 1 |
| 25***50 | Valve, Auxiliary Section | 2 |
| 25***53 | Body, Outlet | 1 |
E3-1-22 Valve, Loader, Shovel Section
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***26 | Kit, Control | 1 |
E3-1-6 Valve, Loader, 2 Spool, With Auxiliary Circuit
| 25***48 | Body, Inlet | 1 |
| 25***49 | Valve, Check | 2 |
| 25***51 | Valve, Shovel Section | 1 |
E3-2-35 Valve, Excavator, Stabiliser Section
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***26 | Kit, Control | 1 |
E3-2-30 Valve, Excavator, Stabiliser Section
| 25***20 | Kit, Plug | 1 |
| 25***26 | Kit, Control | 1 |
| 25***29 | Kit, Plug | 2 |
E3-9-1 Valve, Priority, Steering
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 2 |
| 13***7D | Bolt, M8 X 75mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
E3-7-1 Filter, Hydraulic
| 32***46 | Element, Hydraulic Filter, 12 Micron,229mm Long | 1 |
| 32***57 | Cap, Assembly, (Includes Seal & Spring - Not Available Sep), Cap, Assembly, (Includes Seal & Spring - Not Available Sep); Includes Seal And Spring. Seal And Spring Are Non Servicable Parts - Use Cap Assembly | 1 |
| 58***89 | Filter, Assembly | 1 |
E3-1-10 Valve, Loader, Auxiliary Section
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***26 | Kit, Control | 1 |
E3-12-1 Valve,Manifold, Components, 331/61570
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 25***20 | Valve, Check Cartrid | 1 |
| 25***55 | Cartridge, Sequence Valve | 2 |
E3-2-20 Valve, Excavator, Bucket Section
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***26 | Kit, Control | 1 |
E3-1-7 Valve, Loader, 2 Spool
| 25***47 | Body, Outlet | 1 |
| 25***48 | Body, Inlet | 1 |
| 25***49 | Valve, Check | 2 |
E3-2-10 Valve, Excavator, Dipper Section
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***26 | Kit, Control | 1 |
E3-4-10 Adaptors, Excavator Valve
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 8 |
| 16***53 | Adaptor; O Ring 24***06 | 3 |
E3-6-5 Valve, Excavator, 6 Spool(Iso Control)
| 25***49 | Valve, Check | 1 |
| 25***50 | Valve, Auxiliary Section | 2 |
| 25***53 | Body, Outlet | 1 |
E3-1-30 Valve, Loader, Lift Section
| 25***20 | Kit, Plug | 1 |
| 25***45 | Kit-Spool End | 1 |
| 25***46 | Kit-Spool End | 1 |
E3-1-1 Valve, Loader, 3 Spool
| 25***43 | Valve, 3 Spool Loader, Mini Backhoe | 1 |
| 25***47 | Body, Outlet | 1 |
| 25***48 | Body, Inlet | 1 |
E3-4-1 Adaptors, Excavator Valve
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 8 |
| 16***53 | Adaptor; O Ring 24***06 | 3 |
E3-1-32 Valve, Loader, Lift Section
| 25***20 | Kit, Plug | 1 |
| 25***46 | Kit-Spool End | 1 |
| 25***58 | Kit-Lever, Stabiliser Control | 1 |
E3-2-1 Valve, Excavator, 6 Spool(Sae Control)
| 25***42 | Valve, 6 Spool Excavator, Sae Control Mini Cx | 1 |
| 25***49 | Valve, Check | 1 |
| 25***53 | Body, Outlet | 1 |
E3-1-20 Valve, Loader, Shovel Section
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***26 | Kit, Control | 1 |
E3-2-5 Valve, Excavator, 6 Spool(Iso Control)
| 25***49 | Valve, Check | 1 |
| 25***53 | Body, Outlet | 1 |
| 25***54 | Valve, Boom Section | 1 |
E3-3-1 Adaptors, Loader Valve
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 16***53 | Adaptor; O Ring 24***06 | 6 |
E4-9-10 Ram, Stabiliser, 30mm Rod X 60mm Cyl
| 55***77 | Ram, Assembly, 30mm X 60mm; Superseded To 33***09 On San100846, D.Jackson 26/06/09 ( Pi R01568aa ) | 1 |
| 55***77 | Cylinder, Wa | 1 |
| 59***68 | Rod, Piston, 40mm | 1 |
E4-9-1 Ram, Stabiliser, 30mm Rod X 60mm Cyl, With Check Valve
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***50 | Adaptor | 4 |
| 24***03 | O Ring | 1 |
E4-12-1 Hydraclamp, Sideshift
| 13***1D | Bolt, M24 X110mm Long | 4 |
| 13***3D | Nut, Lock M24 | 4 |
| 24***03 | Seal, Square Section | 4 |
E4-6-1 Ram, Dipper Fixed, 35mm Rod X 60mm Cyl, Std And Extra Long
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***73 | Ram, Dipper Assembly | 1 |
E4-1-1 Ram, Lift, 30mm Rod X 50mm Cyl
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***60 | Ram, Lift | 2 |
| 55***60 | Cylinder, Lift Ram | 1 |
E4-3-1 Ram, Steering,
| 45***06 | Ram, Power Track Rod | 1 |
| 90***64 | Circlip | 1 |
| 99***70 | Cylinder, Assembly; San 22296.Cwe To 44***05.P Gamble 14/04/06, Ref Rob Salter & Ognibene | 1 |
E4-5-1 Ram, Boom, 30mm Rod X 60mm Cyl
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***55 | Ram, Boom | 1 |
| 55***55 | Cylinder, Boom Ram | 1 |
E4-2-10 Ram, Shovel, 30mm Rod X 50mm Cyl, Left Hand
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***62 | Ram, Shovel, Left Hand | 2 |
| 55***62 | Cylinder, Shovel Ram, Left Hand | 1 |
E4-2-1 Ram, Shovel, 30mm Rod X 50mm Cyl, Right Hand
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***61 | Ram, Shovel, Right Hand | 2 |
| 55***61 | Cylinder, Shovel Ram, Right Hand | 1 |
E4-7-1 Ram, Bucket, 30mm Rod X 60mm Cyl
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***53 | Ram, Bucket | 1 |
E4-6-10 Ram,Dipper Extending, 25mm Rod X 40mm Cyl
| 33***39 | Ram, Dipper Assembly, Extending | 1 |
E4-11-1 Ram, Slew/Swing, 35mm Rod X 60mm Cyl
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
| 33***72 | Rod, Piston, 35mm Dia. | 1 |
| 33***73 | Kit-Ram Seal, 60mm Cyl X 35mm Rod | 1 |
E4-9-11 Ram, Stabiliser
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 33***09 | Ram, Stabiliser | 2 |
| 59***32 | Cap, End | 1 |
E4-12-10 Hydraclamp, Sideshift
| 13***1D | Bolt, M24 X110mm Long | 4 |
| 13***3D | Nut, Lock M24 | 4 |
| 33***34 | Plate, Clamp Wa | 2 |
F Axles, Wheels & Transmission
F1-1-1 Axle Assembly, Front,Steering, 2wd
| 13***1D | Screw, M12x45 | 4 |
| 13***8D | Bolt, M10 X 80 | 1 |
| 13***7D | Bolt, M12 X 75mm Long | 2 |
F1-1-10 Axle/Motors Assembly, Front,Steering, 4wd
| 13***1D | Screw, M12x45 | 4 |
| 13***8D | Bolt, M10 X 80 | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
F2-1-1 Axle Assembly, Rear Drive
| 10***71 | Axle, Rear | 1 |
| 33***54 | Flinger, Pinion Oil | 1 |
| 33***55 | Bearing | 1 |
F2-1-10 Differential, Assembly
| 33***73 | Bearing, Differential | 1 |
| 33***76 | Bolt, Drive Gear | 10 |
| 33***11 | Kit-Plate, Differential | 1 |
F3-2-20 Wheel And Tyre, Rear,Jcb Sitemaster, 31x15.5-15
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***49 | Wheel, Assembly, 31x15.5-15,6 Ply | 2 |
| 33***90 | Rim, Wheel | 1 |
F3-4-5 Wheel And Tyre, Rear Goodyear, Softrac Hf-1,31x15.5
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***94 | Wheel, Assembly, Gdyr.Softrac Hf-1 | 2 |
| 41***35 | Rim, Wheel | 1 |
F3-1-1 Wheel And Tyre, Front,Solideal, 23 X 8.5
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***50 | Wheel, Assembly, 23x8.5-12, 6 Ply | 2 |
| 41***16 | Rim, Wheel, 23x8.5 | 1 |
F3-3-5 Wheel And Tyre, Front,Continental, Am Turf,23 X 8.5
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***93 | Wheel, Assembly,23x8.5-12, Continental Am | 2 |
| 41***34 | Rim, Wheel | 1 |
F3-4-1 Wheel And Tyre, Rear,Jcb Sitemaster, 31x15.5-15
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***25 | Wheel, Assembly, 31 X 15.5-15 | 2 |
| 34***65 | G.A. | 0 |
F3-2-1 Wheel And Tyre, Rear,Continental, 400/50-15
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***51 | Wheel, Assembly, 400/50-15 | 2 |
| 33***90 | Rim, Wheel | 1 |
F3-2-5 Wheel And Tyre, Rear,Solideal, Sd R1,31x15.5-15
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***55 | Wheel, Assembly, 31x15.5-15 | 2 |
| 33***90 | Rim, Wheel | 1 |
F3-1-20 Wheel And Tyre, Front,Jcb Sitemaster, 23 X 8.5-12
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***81 | Wheel, Assembly, 23x8.5-12 | 2 |
| 41***16 | Rim, Wheel, 23x8.5 | 1 |
F3-2-11 Wheel And Tyre, Rear, Goodyear, Super Terra Grip, 31x15.5-15
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***63 | Wheel, Assembly | 2 |
| 33***90 | Rim, Wheel | 1 |
F3-4-11 Wheel And Tyre, Rear, Goodyear, Super Terra Grip, 31x15.5-15
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***15 | Wheel, Assembly,31x15.5, Gdyr Super Terra | 2 |
| 41***35 | Rim, Wheel | 1 |
F3-1-10 Wheel And Tyre, Front,Continental, Am Turf,23 X 8.5
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***27 | Wheel, Assembly | 2 |
| 41***16 | Rim, Wheel, 23x8.5 | 1 |
F3-2-10 Wheel And Tyre, Rear,Goodyear, Softrac Hf-1,31 X 15.5
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***26 | Wheel, Assembly | 2 |
| 33***90 | Rim, Wheel | 1 |
F3-3-1 Wheel And Tyre, Front,Jcb Sitemaster, 23 X 8.5-12
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***26 | Wheel, Assembly, 23 X 8.5-12 | 2 |
| 34***66 | G.A. | 1 |
F3-4-10 Wheel And Tyre, Rear,Solideal, Sd R1,31x15.5-15
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***14 | Wheel, Assembly,Solideal, 31x15.5 Sd R1 | 2 |
| 41***35 | Rim, Wheel | 1 |
M Engine 403c-11 Tier-2
M1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***41 | Gear | 1 |
| 02***42 | Key | 1 |
| 02***43 | Pin | 1 |
M1-6-1 Timing Case,, Camshaft & Gears, Hh Build
| 02***68 | Key | 1 |
| 02***78 | Nut | 4 |
| 02***79 | O Ring | 1 |
M1-1-1 Engine, Complete, 13.7kw, Hh Build
| 01***71 | Engine, Complete 403c-11, Nat/Aspirated | 1 |
| 34***03 | G.A, Engine | 1 |
M1-6-2 Timing Levers,, Arms & Springs, Hh Build
| 02***71 | Screw | 2 |
| 02***96 | Nut | 3 |
| 02***06 | Lever | 1 |
M1-3-1 Block Assembly, Hh Build
| 02***01 | Plug, D=15 | 1 |
| 02***02 | Plug, D=25 | 1 |
| 02***04 | Plug, D=40mm | 2 |
M1-7-1 Flywheel & Housing, Hh Build
| 02***36 | Ring, Starter | 1 |
| 02***37 | Screw | 6 |
| 02***39 | Flywheel | 1 |
M1-5-1 Fans, Pulleys, & Fan Belt, Hh Build
| 02***66 | Pulley, Crankshaft | 1 |
| 02***67 | Nut | 1 |
| 02***68 | Key | 1 |
M1-8-1 Engine Mountings
| 01***27 | Mounting, Engine | 4 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***8D | Setscrew, M12 X 30 | 8 |
M2-5-1 Lifting Plates, Engine, Hh Build
| 02***12 | Screw | 2 |
| 02***52 | Plate, Engine Lifting | 2 |
M2-3-1 Rocker Cover, Hh Build
| 02***73 | Breather, Gauze | 1 |
| 02***78 | Seal | 1 |
| 02***55 | Cap, Engine Oil Filler | 1 |
M2-1-1 Cylinder Head
| 02***01 | Plug, D=15 | 2 |
| 02***42 | Seal, Inlet Valve | 3 |
| 02***43 | Spring, Valve | 6 |
M2-2-1 Rocker Assembly, Push Rods & Tappets, Hh Build
| 02***78 | Nut | 3 |
| 02***66 | Spring | 2 |
| 02***67 | Screw, Adjusting | 6 |
M3-1-1 Manifold, Induction, Hh Build
| 02***76 | Screw | 2 |
| 02***48 | Pipe, Air Induction | 1 |
| 02***49 | Gasket | 1 |
M3-3-1 Filter, Air
| 13***9D | Bolt | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 22***12 | Clip, Jubilee | 3 |
M3-2-1 Manifolds, Induction/Exhaust, Hh Build
| 02***96 | Nut | 2 |
| 02***85 | Stud | 2 |
| 02***39 | Gasket | 1 |
M3-4-1 Exhaust System, Tier 2, Hh Build Only
| 02***38 | Gasket | 1 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***9D | Bolt, M12x35 | 1 |
M4-3-1 Radiator, Fittings & Mountings
| 13***3Z | Screw; Replaces 69***21 | 8 |
| 13***3D | Setscrew | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
M4-4-1 Radiators & Hoses, Hh Build
| 22***08 | Clip, Jubilee | 4 |
| 30***01 | Cap, Radiator, Single Seal, 0.5bar | 1 |
| 30***79 | Radiator, High Ambient | 1 |
M4-2-1 Thermostat, Housing, Inlet & Outlet, Hh Build
| 02***22 | Stud | 2 |
| 02***96 | Nut | 4 |
| 02***88 | Housing, Thermostat | 1 |
M4-1-1 Pump, Water, Hh Build
| 02***96 | Nut | 1 |
| 02***89 | Plug, D=30mm | 1 |
| 02***36 | Pump, Water | 1 |
M5-4-1 Filter, Oil, Hh Build
| 02***26 | Connector | 1 |
| 02***28 | Bolt, Banjo | 1 |
| 02***59 | Washer | 4 |
M5-2-1 Pump, Oil, Hh Build
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 3 |
| 02***10 | Pump, Oil & Gear Assembly | 1 |
M5-1-1 Sump, Oil, Hh Build
| 02***02 | Screw | 3 |
| 02***96 | Gasket | 1 |
| 02***97 | Screw | 20 |
M6-1-1 Pump, Fuel Injection, & Shut-Off Solenoid, Hh Build
| 02***96 | Nut | 2 |
| 02***59 | Bolt | 1 |
| 02***61 | Nipple | 1 |
M6-4-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
M6-2-1 Injectors, Fuel, & Injection Pipes, Hh Build
| 02***96 | Nut | 2 |
| 02***66 | Washer | 2 |
| 02***14 | Damper | 4 |
M6-5-1 Pump, Fuel Lift
| 02***10 | Bolt | 2 |
| 02***69 | O Ring | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
M6-3-1 Fuel System, Hh Build
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
M8-1-1 Gasket Sets, Hh Build
| 02***09 | Kit-Gasket, 1.2mm | 1 |
| 02***11 | Kit-Gasket, 1.3mm | 1 |
N Engine 403d-11 Tier-3
N1-1-1 Engine, Complete, 403d-11 Tier 3
| 33***20 | Engine, Complete 403d-11, Nat/Aspirated | 1 |
| 34***26 | G.A., Engine | 1 |
N1-8-1 Engine Mountings
| 01***27 | Mounting, Engine | 4 |
| 13***7D | Setscrew, M8x25 | 16 |
| 13***8D | Setscrew, M12 X 30 | 8 |
N1-4-1 Crankshaft,Pistons, Bearings & Con-Rods
| 02***42 | Key | 1 |
| 02***43 | Pin | 1 |
| 02***52 | Bush, Small-End | 1 |
N1-5-1 Fan,Pulleys,Belt
| 02***66 | Pulley, Crankshaft | 1 |
| 02***67 | Nut | 1 |
| 02***68 | Key | 1 |
N1-6-1 Timing Case, Camshaft & Gears
| 02***68 | Key | 1 |
| 02***79 | O Ring | 2 |
| 02***81 | Bearing | 1 |
N1-6-2 Timing Levers, Arms & Springs
| 02***71 | Screw | 4 |
| 02***78 | Nut | 1 |
| 02***08 | Washer | 1 |
N1-3-1 Engine Block
| 02***05 | Plug, D=5.4mm | 1 |
| 02***07 | Plug, 8.4mm | 5 |
| 02***08 | Hub | 1 |
N1-7-1 Flywheel & Housing
| 02***36 | Ring, Starter | 1 |
| 02***37 | Screw | 6 |
| 02***39 | Flywheel | 1 |
N2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***78 | Nut | 3 |
| 02***66 | Spring | 2 |
| 02***67 | Screw, Adjusting | 6 |
N2-1-1 Cylinder Head
| 02***42 | Seal, Inlet Valve | 3 |
| 02***43 | Spring, Valve | 6 |
| 02***44 | Cap | 7 |
N2-3-1 Rocker Cover
| 02***73 | Breather, Gauze | 1 |
| 02***76 | Nut, Cap | 3 |
| 02***78 | Seal | 1 |
N3-2-1 Manifold, Exhaust
| 02***96 | Nut | 2 |
| 02***85 | Stud | 2 |
| 02***39 | Gasket | 1 |
N3-3-1 Filter, Air
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 22***10 | Clip, Jubilee | 3 |
N3-4-1 Exhaust System
| 02***38 | Gasket | 1 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***9D | Bolt, M12x35 | 1 |
N4-4-1 Radiator & Hoses
| 22***08 | Clip, Jubilee | 4 |
| 30***01 | Cap, Radiator, Single Seal, 0.5bar | 1 |
| 33***22 | Radiator | 1 |
N4-2-1 Thermostat &, Housing, 403d-11 Tier-3 From S/N Tba 03/2008
| 02***96 | Nut | 1 |
| 02***85 | Stud | 4 |
| 02***89 | Plug, D=30mm | 2 |
N4-1-1 Water Pump, 403d-11 Tier-3, From S/N Tba 03/2008
| 02***96 | Nut | 1 |
| 02***33 | Hose, By-Pass | 1 |
| 02***39 | Gasket | 1 |
N4-3-1 Radiator, Fittings & Mountings
| 13***3Z | Screw; Replaces 69***21 | 8 |
| 13***3D | Setscrew | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
N5-1-1 Sump, Oil, 403d-11 Tier-3, From S/N Tba 03/2008
| 02***02 | Screw | 3 |
| 02***96 | Gasket | 1 |
| 02***97 | Screw | 20 |
N5-4-1 Filter, Oil, 403d-11 Tier-3, From S/N Tba 03/2008
| 02***26 | Connector | 1 |
| 02***28 | Bolt, Banjo | 2 |
| 02***59 | Washer | 4 |
N5-2-1 Pump, Oil, 403d-11 Tier-3, From S/N Tba 03/2008
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 3 |
| 02***10 | Pump, Oil & Gear Assembly | 1 |
N6-1-1 Pump, Fuel Injection, & Shut-Off Solenoid
| 02***96 | Nut | 2 |
| 02***59 | Bolt | 1 |
| 02***61 | Nipple | 1 |
N6-1-2 Pump, Fuel Injection, & Shut-Off Solenoid
| 02***96 | Nut | 2 |
| 02***01 | Washer | 1 |
| 02***76 | Shim, 0.20mm | 1 |
N6-3-1 Fuel System
| 13***9D | Setscrew, M8x35 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
N6-5-1 Pump Fuel
| 02***10 | Bolt | 2 |
| 02***69 | O Ring | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
N6-4-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
N6-2-1 Injectors, Fuel, & Injection Pipes
| 02***96 | Nut | 2 |
| 02***66 | Washer | 2 |
| 02***14 | Damper | 4 |
MINI CX-2WD(Foot Operated F/R) serial number reference
The machine identification plate is located on the front face of the upper structure, on either the right or left side. The serial number is also stamped into the chassis frame as a backup if the plate is missing or worn.
| Prefix | Identifies | Notes |
|---|---|---|
| 01042001-01042856 | JCB MINI CX 2WD (Foot Operated F/R) - Agricultural configuration |
Frequently asked questions
What engine does the JCB MINI CX use?
The JCB MINI CX is equipped with a 20 hp (15 kW) Perkins three-cylinder engine.
What is the operating weight of the JCB MINI CX?
The operating weight of the JCB MINI CX is 1.53 tons (3,373 lb).
What model replaced the JCB MINI CX?
The JCB 3CX series succeeded the MINI CX in the compact backhoe market.
What MINI CX-2WD(Foot Operated F/R) owners discuss
What is the primary powertrain configuration and travel speed capability of the JCB Mini CX?
The machine uses a single-speed hydrostatic transmission with two-wheel drive. It achieves travel speeds up to 6.2 mph (10 km/h) in forward and 3.7 mph in reverse. The hydrostatic system provides the primary braking service, which engages when the drive pedal is released.
What are the known hydraulic system behaviors and maintenance issues for this model?
Owners report that the hydraulic tank can vent fluid from the top when worked hard, creating a mess. The machine uses diesel engine oil for its hydraulic system. Additionally, the front axle pivot has a grease zirk that is often neglected; at approximately 500 hours, the bushing may need replacement.
What are the typical undercarriage or wear patterns for the Mini CX?
The machine is described as stout and tough. However, the undercarriage lacks grease fittings for the rollers. The front axle pivot bushing is a known wear item around 500 hours if not greased. The chassis is an integral welded structure designed for high service life.
What engine quirks or operational notes apply to the Perkins engine in this series?
The Mini CX is equipped with a 15 kW (20 hp) Perkins three-cylinder engine. Some owners report overheating issues, which were resolved by removing the thermostat. The engine is noted for being powerful for its size.
What are common electrical or sensor issues reported by operators?
Electrical faults are a primary cause of movement problems. The neutral start switch is a known issue; if faulty, it can prevent starting or cause intermittent operation. A blown 30-amp fuse when starting or operating the front bucket suggests an electrical short or overload in the wiring harness near the ignition switch or loader controls. Dust, vibration, and poor maintenance can cause short or open circuits in the wiring.
What should be checked when buying a used JCB Mini CX?
Verify the condition of the front axle pivot bushing and ensure the grease zirk is accessible. Check for hydraulic fluid venting from the tank top. Inspect the neutral start switch and wiring harness for damage or corrosion. Confirm the engine does not overheat (check thermostat function). Verify that the hydrostatic transmission engages smoothly in both forward and reverse, as solenoid or cable issues can cause loss of drive.
What is the safety-critical fix regarding the transmission control system?
Ensure the neutral start switch and forward/reverse microswitches are functioning correctly to prevent unintended movement or failure to start. Have your dealer verify the electrical continuity and solenoid operation for the hydrostatic transmission control circuit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb MINI CX-2WD(Foot Operated F/R). Related factory variants of the same model family:
MINI CX 2WD(Hand Operated F/R)MINI CX 2WD(Hand Operated F/R)MINI CX 2WD(Foot Operated F/R)
Need a specific MINI CX-2WD(Foot Operated F/R) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.