JCBagriculturalmicro
Jcb MICRO PLUS-T2
Maintenance schedule, common problems & OEM parts breakdown
The JCB MICRO PLUS-T2 is a mini excavator in the compact equipment class, part of the Micro series lineage that includes the base MICRO and MICRO-T2 variants. Production for this series spans from approximately 2004 to 2006, with the MICRO PLUS-T2 serving as an enhanced configuration within that window. The machine is powered by a naturally aspirated engine, with variants including 9.0 kW (12 hp) and 13.8 kW (18.5 hp) outputs. Operating weight is approximately 2,893 lb (1,312 kg), varying by configuration and attachments. Configurations offered include standard dipper lengths of 2 ft 31 in (800 mm) and 3 ft 37 in (950 mm), with optional 3 ft 45 in (1,138 mm) dipper. The MICRO PLUS-T2 succeeded earlier Micro models and preceded the 8010 series, sharing the same compact footprint and undercarriage design.
Across the Micro series generations, primary changes involved engine power upgrades and emissions compliance updates, moving from naturally aspirated units to more efficient configurations while maintaining the same compact dimensions. The MICRO PLUS-T2 is relevant in the used and parts market today due to its widespread use in utility and municipal work, where ground-level service access and 500-hour oil intervals provided high uptime. The machine’s simple hydraulic architecture and common engine components make it a staple for independent contractors, driving steady demand for aftermarket final drives, hydraulic pumps, and radiator assemblies. Its compact size allows access to confined spaces, ensuring continued relevance in renovation and landscaping sectors.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb MICRO PLUS-T2 specifications
Engine
| Engine Model | 103-10 MICRO PLUS |
| Gross Power | 18.2 hp (13.6 kW) |
| Net Power | 17 hp (12.7 kW) |
| Displacement | 58 cu in (0.95 L) |
| Max Torque | 41 lb ft (55.6 N m) @ 2000 rpm |
Weights
| Operating Weight | 2893 lb (1312 kg) |
| Ground Pressure | 3.1 psi (21.4 kPa) |
Dimensions
| Transport Length | 9.83 ft (2.99 m) with 3ft.1in. (950mm) dipper; 10.08 ft (3.07 m) with 3ft. 7in. (1138mm) dipper |
| Transport Width | 3.17 ft (0.97 m) |
| Transport Height | 7.67 ft (2.34 m) |
| Track Gauge | 3.25 ft (0.99 m) |
| Ground Clearance | 0.71 ft (0.22 m) |
| Tail Swing Radius | 2.75 ft (0.84 m) |
| Shoe Size | 27.56 in (700 mm) |
Performance
| Swing Speed | 8 rpm |
| Drawbar Pull | 2023 lb (8998 N) |
| Hydraulic Pump Flow | 7.1 gal/min (26.9 L/min) |
| Hydraulic Relief Pressure | 2560 psi (17.6 MPa) |
Service capacities (summary)
| Fuel Tank | 3.9 gal (14.8 L) |
| Hydraulic System | 5.5 gal (20.8 L) |
| Engine Oil | 0.9 gal (3.4 L) |
| Cooling System | 1.3 gal (4.9 L) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb MICRO PLUS-T2 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the MICRO PLUS-T2 beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic tank, axle, and final drive systems to establish a contamination baseline. Inspect the hydraulic return filter magnet for metallic debris before disposal. At 1,000 hours, interpret hydraulic samples against the 500-hour baseline to determine if intervals should be extended or compressed. Monitor coolant condition during the 1,000-hour flush to prevent corrosion in the Micro’s compact cooling system. Track track sag measurements against wear limits to predict undercarriage failure before catastrophic wear occurs.
Corrective & Common Repairs
Address hydraulic hose chafing and cylinder rod scoring during the 500-hour inspection to prevent seal failure. Replace the primary and secondary fuel filters at 250 hours to protect common-rail injectors from contamination. Check turbocharger shaft play and boot condition at 1,000 hours to prevent boost loss. Inspect stabilizer pivots and slew ring bolts for tightness to avoid structural stress. Replace the air filter element or clean per restriction indicator to maintain engine performance in dusty environments.
Overhaul & Rebuild Points
The 2,000-hour service mandates draining the hydraulic tank, cleaning the interior, and refilling with JCB-spec oil to remove accumulated sludge. Measure swing ring radial and axial play with a dial indicator to determine if the slew mechanism requires rebuild. Inspect the boom, arm, loader arm, and chassis for structural cracking or unauthorized welding. Service brake discs and check immersed brake condition to ensure stopping power. Check injector spray patterns via diagnostic tool and replace as required to maintain combustion efficiency.
Seasonal & Environment Servicing
In cold climates, check coolant expansion tank level and verify long-life coolant concentration before winter. Inspect cab HVAC system including A/C pressure and cabin filter at 2,000 hours to ensure operator comfort. In dusty environments, clean or replace the air filter element more frequently based on restriction indicator readings. Check battery electrolyte on non-sealed units to prevent corrosion. Verify ground-level access covers and inspection points to ensure all service points remain accessible despite mud or debris accumulation.
MICRO PLUS-T2 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/400100 | Filter, Fuel Assembly | Fuel system service | Check fitment → |
| 32/925572 | Filter, Hydraulic | Scheduled service item | Check fitment → |
| 32/925363 | Element, 10 Micron, Diameter Of 44 Mm | Scheduled service item | Check fitment → |
| 32/925606 | Filter, Head | Scheduled service item | Check fitment → |
| 32/925376 | Element, For Flushing Only, 3 Micron | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
MICRO PLUS-T2 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Fuel supply restriction, faulty pressure sensor, or high-pressure pump issue | Check fuel filters and lines; verify sensor operation with diagnostic tool |
| P0112 | Intake air temperature sensor malfunction (low voltage) | Short circuit to ground or sensor failure | Inspect wiring harness and connector for damage; test sensor resistance |
| P0102 | Mass Air Flow (MAF) sensor low voltage fault | MAF sensor contamination or electrical fault | Clean MAF sensor; check wiring and connector integrity |
| P0335 | Crankshaft Position Sensor 'A' Circuit (No Signal) | Faulty crank sensor, broken wire, or damaged reluctor ring | Inspect sensor gap and wiring; verify signal with oscilloscope or scanner |
| P0336 | Crank Sensor Fault (Signal Fault) | Intermittent signal or out-of-range voltage from crank sensor | Check sensor mounting and wiring; replace sensor if signal is unstable |
| P0200 | Injector circuit open | Broken wire, blown fuse, or failed injector solenoid | Check injector connectors and wiring continuity; test injector resistance |
| P0261 | Injector circuit low signal (1st cylinder) | Short to ground in injector 1 circuit or faulty injector | Inspect wiring for chafing; swap injector to test for circuit vs. component failure |
| P0115 | Engine Coolant Temperature Sensor 1 Circuit | Faulty coolant sensor or open/short circuit | Check sensor resistance at operating temperature; inspect connector pins |
| P0190 | Fuel Pressure Sensor 'A' Circuit | Faulty fuel pressure sensor or wiring issue | Verify sensor voltage and signal; check fuel rail pressure mechanically |
| P0321 | CAN bus message error for engine speed | Communication fault between engine ECU and display/controller | Check CAN bus wiring and connectors; verify diagnostic tool communication |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
MICRO PLUS-T2 attachments & work tools
Micro Buckets
Standard dipper lengths for the MICRO PLUS are 950 mm (3 ft 1 in) and 1138 mm (3 ft 7 in). The MICRO variant offers dipper lengths of 800 mm (2 ft 6 in) and 950 mm (3 ft 1 in). These sizes correspond to the machine's operating weight of approximately 1312 kg (2893 lbs).
Quick Hitch Couplers
Available coupler types include hydraulic quick hitch, semi quick hitch, and spring quick hitch systems. These mounting systems facilitate rapid tool interchangeability for the MICRO PLUS-T2 class.
Agricultural Attachments
The machine supports a range of agricultural implements including 4-in-1 buckets, cone splitters, deep dig buckets, earth drills, and grapples. Specific grapple configurations include 3+2, 4+3, and 5+4 finger variants in both lightweight and heavy-duty mechanical versions.
Specialty Tools
Compatible work tools include hydraulic mulcher shredders, flail mowers, land stone rakes, log splitters, pallet forks, riddle sorting buckets, and tree shears. Hydraulic thumbs and mechanical thumbs are available for bucket configurations.
Drainage & Grading
Tile drain buckets, tilting ditcher/grading buckets, and trapezoidal 'V' drainage buckets are listed as compatible attachments for the MICRO PLUS series.
All MICRO PLUS-T2 assemblies by section
Every catalogued assembly group for the Jcb MICRO PLUS-T2. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A2-2-1 Bucket, 400mm, Low Profile
| 13***1Z | Nut | 6 |
| 23***22 | Bucket, Assembly, 400mm, Low Profile | 1 |
| 33***53 | Sidecutter, Right Hand | 1 |
A2-6-1 Bucket, Ditch Cleaning
| 52***00 | Bucket, 760mm Ditching | 1 |
A2-12-1 Bucket, 230mm
| 52***00 | Bucket, 230mm | 1 |
A2-4-1 Bucket, General Purpose
| 13***1Z | Nut | 0 |
| 52***00 | Bucket, 230mm | 1 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 0 |
A2-7-1 Bucket, Ditch Cleaning
| 52***00 | Bucket, 900mm Ditching | 1 |
| 52***00 | Bucket, 760mm Ditching | 1 |
A2-8-1 Bucket, 600mm, Low Profile
| 13***1Z | Nut | 8 |
| 23***33 | Bucket, 600mm Low Profile | 1 |
| 33***53 | Sidecutter, Right Hand | 1 |
A2-1-1 Bucket, 300mm
| 13***1Z | Nut | 4 |
| 33***53 | Sidecutter, Right Hand | 1 |
| 33***54 | Sidecutter, Left Hand | 1 |
A2-3-1 Bucket, 460mm, Low Profile
| 13***1Z | Nut | 6 |
| 23***23 | Bucket, Assembly, 460mm, Low Profile | 1 |
| 33***53 | Sidecutter, Right Hand | 1 |
A2-5-1 Bucket, General Purpose, 01.01.08
| 13***1Z | Nut | 0 |
| 33***80 | Bucket, 230mm, Asm | 1 |
| 33***88 | Bucket, 300mm, Asm | 1 |
A2-11-1 Bucket, 160mm, Low Profile
| 13***7D | Bolt, M10 X 75mm | 2 |
| 13***1Z | Nut | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
A3-1-1 Earth Drill
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***04 | Adapter, Male/Male | 1 |
A3-5-1 Kit, Hammer Auxiliary, 980/89486
A3-1-2 Auger And Extension
| 98***10 | Tool, Pilot Bit | 1 |
| 98***00 | Tool, Auger, 101mm Dia. | 1 |
| 98***01 | Tooth | 1 |
A4-2-1 Blade, Dozer, Micro
| 50***08 | Pin | 1 |
| 50***11 | Guard, Protection Plate | 1 |
| 50***12 | Bush, Bronze | 2 |
A4-2-2 Blade, Dozer, Micro
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***1D | Nut, M8 | 6 |
A4-1-1 Blade, Dozer, Micro Plus
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 6 |
| 13***0Z | Bolt, M16 X 40mm | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
A4-2-3 Dozer, Assembly
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***5D | Bolt, M10x65 | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
A4-2-4 Dozer, Assembly, (Improved Geometry)
| 33***34 | Blade, Dozer Wa | 1 |
B Bodywork, Cab, Loader End
B1-4-2 Cowl, Front
| 23***40 | Cover, Front Cowl | 1 |
| 33***56 | Cover, Front Cowl; See San 10***83, Nla | 1 |
| 82***31 | Fastener, Bighead M5 | 1 |
B1-7-1 Mainframe, Cast Slewpan
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***9D | Bolt | 1 |
B1-3-4 Step, Cast
| 58***06 | Step, Right Hand | 1 |
| 58***07 | Step, Left Hand | 1 |
| 82***12 | Screw, M10 X 25mmk, C/Sunk Socket Head | 6 |
B1-1-4 Fuel Sender, Assembly
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 33***58 | Guage, Fuel | 1 |
| 33***08 | Bracket, Fuel Guage | 1 |
B1-1-2 Tank, Hydraulic
| 13***1D | Screw, Set M6x12 | 6 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5D | Setscrew, M10 X 20 | 2 |
B1-8-1 Mainframe, Cast Slewpan
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***2D | Bolt, M12 X 50mm Long | 4 |
B1-3-3 Console
| 13***3Z | Nut | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 1 |
B1-4-1 Engine Cover
| 13***3Z | Nut | 14 |
| 14***5Z | Washer, M5; Replaces 69***59 | 10 |
| 23***10 | Cover, Engine, Assembly | 1 |
B1-1-12 Hydraulic Tank, Assembly
| 13***5Z | Bolt | 1 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5D | Setscrew, M10 X 20 | 2 |
B1-1-1 Mainframe
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 14***1Z | Washer, 2 Ba | 3 |
B1-5-1 Counterweight
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***3Z | Nut | 3 |
| 14***1Z | Washer, 2 Ba | 3 |
B1-6-1 Mainframe
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
| 13***09 | Capscrew | 4 |
B1-1-3 Tank, Diesel
| 13***1D | Setscrew, M5 X 12mm Long | 12 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 14***5D | Washer | 12 |
B1-3-5 Console, Instrument, With Ignition Switch
| 33***50 | Panel, Instrument Console, Wa | 1 |
B1-6-3 Mainframe, Cast Slewpan
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 14***1Z | Washer, 2 Ba | 3 |
B1-3-1 Bodywork
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 23***10 | Cover, Engine, Assembly | 1 |
B2-3-11 Seat, Assembly
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***77 | Seat | 1 |
B2-3-1 Seat
| 40***04 | Kit, Seat Adjuster Rails | 1 |
| 40***31 | Seat | 1 |
B2-2-1 Front Handrail
| 13***1D | Setscrew, M10 X 45 | 6 |
| 23***87 | Frame, Front Handrail | 0 |
| 23***71 | Front Tops Frame | 1 |
B2-3-10 Seat, Assembly
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 15***01 | Holder, Handbook | 1 |
B2-5-1 Seat Belt
| 13***9Z | Bolt, M12x90mm | 1 |
| 13***3Z | Nut, M12 | 1 |
| 40***62 | Belt, Seat | 1 |
B2-1-1 Rear Two Post Frame
| 13***8Z | Bolt, M12 X 30 | 7 |
| 14***9Z | Washer | 11 |
| 23***16 | G.A. Rear 2 Post Kit | 1 |
B2-10-1 Console
| 13***3D | Nut, Lock M5 | 4 |
| 14***5D | Washer | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 1 |
B2-1-2 Rear Two Post Frame
| 13***8D | Setscrew, M12 X 30 | 7 |
| 13***9D | Bolt | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
B4-3-1 Boom, Long, Micro Plus
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 33***15 | Boom, Long | 1 |
B4-4-1 Dipper, Short & Extra Short
| 13***5Z | Bolt | 3 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***3Z | Nut, Lock, M10 | 5 |
B4-1-1 Kingpost
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***5Z | Bolt | 1 |
| 13***9Z | Bolt, M10x90mm | 3 |
B4-2-1 Boom, Short, Micro
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 33***37 | Boom, Short (1342 Centres) | 1 |
B4-5-1 Dipper, Short & Long
| 13***5Z | Bolt | 3 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***3Z | Nut, Lock, M10 | 5 |
B5-2-1 Decals
| 81***79 | Decal, Slew Lock | 1 |
| 81***78 | Decal, Jcb Logo, Black | 3 |
| 81***28 | Decal, Silver Micro, Vertical | 2 |
B5-2-2 Label, Groundcare
| 81***49 | Decal, Jcb Groundcare, 79mm X 121mm | 1 |
| 81***50 | Decal, Groundcare | 1 |
B5-2-3 Decals, 8010, 8012
| 81***44 | Decal, 8010 Vertical | 1 |
| 81***45 | Decal, 8010 Horizontal | 1 |
| 81***46 | Decal, 8012 Vertical | 1 |
B5-1-2 Labels
| 33***08 | Decal, Warning-Fan Blades, Remove Key From Ign. | 1 |
| 33***52 | Decal, Glow Plug Warning | 1 |
| 33***88 | Label, Hydraulic Fill; Hydraulic Fill Label | 1 |
B5-1-1 Labels
| 81***55 | Label, Diesel | 1 |
| 81***56 | Label, Hydraulic Fluid | 1 |
| 81***92 | Label, Loader Arm, Scissor Point | 2 |
B5-3-1 Tool Kit
| 25***03 | Ring, Key | 1 |
| 40***01 | Grease, Mpl-Ep, 400g. | 1 |
| 82***06 | Spanner, D.O.E., 1" X 1.1/8" A/F | 1 |
B5-3-2 Tool Kit
| 23***00 | Kit, Tools | 1 |
| 25***03 | Ring, Key | 1 |
| 27***00 | Bag, Tool | 1 |
B5-1-3 Labels, Control
| 81***52 | Label, Dig Control | 1 |
C Electrics-Machine, Cab & Engine
C1-4-1 Worklight Assembly
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Bolt, M8 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
C1-5-1 Lead, Battery
| 71***29 | Boot, Alternator Stud | 2 |
| 71***86 | Cover, Battery Lug | 1 |
| 71***26 | Lead, Battery Positive | 1 |
C1-3-2 Battery, Tray, Isuzu Engine
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 1 |
| 14***6D | Washer, M6 Plain | 2 |
C1-3-1 Battery, Fuses & Diode
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 2 |
C1-1-2 Horn
| 13***4Z | Bolt, M10x60 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-2-2 Electrics, Assembly
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
| 13***5D | Setscrew, M8x20 | 1 |
C1-3-3 Fuse Box
| 71***00 | Maxi Fuse 40amp | 1 |
| 72***79 | Terminal, Crimp, 4 - 6mm | 2 |
| 72***28 | Holder, Maxi Fuse, With Secondary Lock | 1 |
C1-2-1 Harnesses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 27***43 | Shield, Harness Protection, T=1mm | 9 |
| 33***25 | Harness, Main | 1 |
C2-10-1 Electrics, Engine, 403d-11 Tier-3
| 02***01 | Washer | 1 |
| 02***88 | Connector | 1 |
| 02***61 | Lead | 1 |
C2-1-1 Electrical Equipment
| 02***01 | Washer | 1 |
| 02***88 | Connector | 1 |
| 02***39 | Connector | 1 |
C2-4-1 Alternator
| 02***88 | Connector | 1 |
| 02***39 | Connector | 1 |
| 71***59 | Alternator | 1 |
C2-15-1 Alternator, Bracket
| 02***49 | Washer | 1 |
| 02***51 | Washer | 1 |
| 02***72 | Screw | 1 |
C2-3-1 Motor, Starter
| 02***43 | Nut | 1 |
| 71***08 | Kit, Seals | 1 |
| 71***00 | Motor, Starter | 1 |
C2-14-1 Alternator, 403d-11 Tier-3
| 02***88 | Connector | 1 |
| 02***39 | Connector | 1 |
| 71***59 | Alternator | 1 |
C2-5-1 Alternator Mountings
| 02***49 | Washer | 1 |
| 02***51 | Washer | 1 |
| 02***70 | Bracket, Alternator | 1 |
C3-2-1 Beacon Kit, Front Mounted Tops, (Option)
| 33***08 | Mounting, Beacon | 1 |
| 33***09 | Mounting, Beacon Socket | 1 |
| 70***00 | Beacon, 12v, (155mm Tall) | 1 |
C3-1-1 Console, Instrument Panel
| 70***43 | Light, Warning Led, Battery/Glow Plug | 1 |
| 70***44 | Light, Warning Led, Oil/Water | 1 |
| 70***84 | Switch, Ignition, (Supplied With X2 Keys) | 1 |
D Controls-Machine, Engine
D1-1-1 Control Levers, Hand
| 11***16 | Joint, Universal | 2 |
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***4D | Setscrew, 1/2 Unf X 3/4 | 4 |
D1-3-1 Control Levers, Excavator Lock
| 12***30 | Knob | 1 |
| 13***5Z | Bolt | 4 |
| 13***12 | Bolt | 1 |
D1-4-2 Control Rod, Assembly
| 13***2Z | Nut, M8 | 1 |
| 33***80 | Rod, Control | 1 |
| 82***08 | Nut, M8 Lh Thin | 1 |
D1-2-1 Control Levers, Foot
| 13***7D | Bolt, M8 X 75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 33***02 | Block, Pivot | 2 |
D1-4-1 Slew Lock
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 21***05 | Pin, Split | 1 |
D2-11-1 Control, Throttle, Tier 3
| 12***30 | Knob | 1 |
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***5D | Setscrew, M8x20 | 1 |
D2-1-1 Control, Throttle, Tier 2
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E Hydraulics & Air
E1-1-1 Circuit, Double Acting
| 13***5D | Setscrew, M8x20 | 4 |
| 14***7D | Washer, M8 Plain | 1 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
E1-15-1 Hose And Pipework, Auxiliary, Single Acting
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***05 | Nut | 1 |
E1-16-1 Hose And Pipework, Auxiliary, Double Acting
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***05 | Nut | 1 |
E1-1-2 Hose And Pipework, Upper Structure, Micro Plus
| 13***9Z | Setscrew, M8x35 | 1 |
| 23***07 | Grommet, 38mm Diameter | 2 |
| 25***00 | Cover, Spiral, Sheathing | 1 |
E1-2-1 Hoses And Pipework, Slew Motor
| 13***09 | Capscrew | 4 |
| 14***08 | Washer | 4 |
| 16***54 | Adapter | 1 |
E1-1-4 Pipe, Return, Cast Slewpan
| 33***76 | Pipe, Return | 1 |
E1-1-3 Hoses, Upper Structure
| 23***07 | Grommet, 38mm Diameter | 2 |
| 25***00 | Cover, Spiral, Sheathing | 1 |
| 33***23 | Hose, 3/8bsp H/P, 500mm | 1 |
E1-3-1 Hoses And Pipework, Undercarriage, Micro
| 50***17 | Adapter, Tee | 1 |
| 50***26 | Adapter, Tee | 1 |
| 50***27 | Hose | 2 |
E1-10-1 Hoses And Pipework, Rotary Coupling,Top
| 14***11 | Seal, Bonded | 7 |
| 16***51 | Adaptor | 3 |
| 16***52 | Adapter | 4 |
E1-3-2 Hose & Pipework, Undercarriage
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
| 33***07 | Hose, Clamp Body 1/4" | 1 |
| 33***08 | Hose, Clamp Top Plate | 1 |
E1-5-1 Hoses And Pipework, Bucket Ram, Micro
| 23***00 | Dipper, Assembly, Short | 1 |
| 23***36 | Dipper, Assembly | 1 |
| 23***89 | Kit, Dipper Arm, Extra Short | 1 |
E1-11-1 Hoses And Pipework, Rotary Coupling,, Bottom
E1-4-1 Hoses And Pipework, Pump
| 13***7Z | Capscrew, Socket Head | 2 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 20***90 | Pump, 6cc/Rev | 1 |
E1-2-2 Hoses & Pipework, Track Motor, Single Speed
| 16***50 | Adaptor | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 18 |
| 16***63 | Adaptor | 4 |
E1-6-1 Hoses And Pipework, Bucket Ram, Micro Plus
| 23***00 | Dipper, Assembly, Long | 1 |
| 23***00 | Dipper, Assembly, Short | 1 |
| 23***91 | Kit, Dipper Arm, Short | 1 |
E2-4-2 Motor, Track, Micro
| 20***70 | Track Wheel Motor, Complete | 1 |
| 20***69 | Screw | 6 |
| 20***70 | Cover | 1 |
E2-2-2 Motor, Track, Micro Plus
| 20***37 | Capscrew, Socket Head | 6 |
| 20***17 | Valve, Assembly; San 10***35 | 1 |
| 20***19 | Kit, Swash Plate | 1 |
E2-5-1 Gearbox, &, Track Motor
| 20***70 | Track Wheel Motor, Complete | 1 |
| 20***69 | Screw | 6 |
| 20***70 | Cover | 1 |
E2-1-1 Pump, Main Hydraulic
| 20***90 | Pump, 6cc/Rev | 1 |
| 20***52 | Kit-Seal | 1 |
| 20***53 | Seal Kit | 1 |
E2-1-5 Pump, Installation
| 13***7Z | Capscrew, Socket Head | 5 |
| 20***90 | Pump, 6cc/Rev | 1 |
| 20***78 | Key, Woodruff, 3.2 X 6.5 X 16dia | 1 |
E2-1-2 Pump & Adapters, Main Hydraulic
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 20***90 | Pump, 6cc/Rev | 1 |
| 33***73 | Adaptor, Hydraulic Test Point, (Includes O-Ring) | 1 |
E3-14-4 Valve, Track Gearbox
| 20***85 | Seal, O. Ring | 1 |
| 20***86 | Seal, O. Ring | 1 |
| 20***87 | Valve | 1 |
E3-2-1 Rotary Joint, Micro Plus
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 12 |
E3-1-1 Valve, 10 Spool
| 25***10 | Valve, Section, Slew | 1 |
| 25***11 | Valve, Section, Dipper Arm | 1 |
| 25***12 | Valve, Section, Track Extension | 1 |
E3-8-2 Valve Section, Boom Swing
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
E3-2-9 Rotary Joint, Micro
| 50***17 | Adapter, Tee | 1 |
| 50***34 | Adapter, 90 Degree | 1 |
| 50***08 | Adapter | 4 |
E3-2-10 Rotary Joint, Micro
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 8 |
| 45***72 | Joint, Rotary 7 Port | 1 |
E3-10-2 Valve Section, Auxiliary
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
| 24***06 | O Ring | 1 |
| 25***23 | Kit, Plug | 1 |
E3-14-1 Valve Section, R.H. Track
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 16***67 | Adaptor | 1 |
| 25***16 | Valve, Section, R.H. Track | 1 |
E3-8-1 Valve Section, Boom Swing
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 25***19 | Valve, Section, Boom Swing | 1 |
| 25***20 | Kit, Plug | 1 |
E3-1-2 Adapters, Valve Block Kit
| 16***53 | Adaptor; O Ring 24***06 | 4 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 3 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 1 |
E3-1-3 Valve, 10 Spool
| 16***53 | Adaptor; O Ring 24***06 | 4 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 3 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 1 |
E3-4-1 Valve, Mountings
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Bolt, M10 X 45mm | 4 |
| 13***3Z | Nut, Lock, M10 | 5 |
E3-13-1 Valve Section, Boom
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***09 | Kit, Combined Valve, Arv | 2 |
E3-14-3 Page Superseded, See E3-14-4, Valve,Track Gearbox ,Micro
| 50***64 | Valve, Track Motor | 1 |
| 50***65 | O Ring | 101 |
| 50***66 | O Ring | 1 |
E3-5-1 Valve Section, L.H. Track
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 16***67 | Adaptor | 1 |
| 25***17 | Valve, Section, L.H. Track | 1 |
E3-11-1 Valve Section, Dozer Blade
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***13 | Valve, Section, Dozer | 1 |
E3-7-1 Valve Section, Dipper Arm
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***11 | Valve, Section, Dipper Arm | 1 |
E3-3-2 Filter, Hydraulic
| 32***63 | Element, 10 Micron, Diameter Of 44 mm | 1 |
| 32***77 | Cap | 1 |
| 32***72 | Filter, Hydraulic | 1 |
E3-3-1 Filter, Hydraulic
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
| 32***76 | Element, For Flushing Only, 3 Micron | 1 |
E3-2-11 Rotary Joint, Micro
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 3 |
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 8 |
| 20***63 | Seal, Kit | 1 |
E3-1-4 Controls, Cast Slew Pan
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 24***06 | O Ring | 2 |
E3-12-2 Valve Section, Bucket
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***25 | Kit, Seal | 1 |
E3-9-2 Valve Section, Track Extension
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***20 | Kit, Plug | 1 |
E3-12-1 Valve Section, Bucket
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***15 | Valve, Section, Bucket | 1 |
E3-10-1 Valve Section, Auxiliary
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
| 24***06 | O Ring | 1 |
| 25***14 | Valve, Section, Auxiliary | 1 |
E3-9-1 Valve Section, Track Extension
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***12 | Valve, Section, Track Extension | 1 |
E3-11-2 Valve Section, Dozer Blade
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***20 | Kit, Plug | 1 |
E3-6-1 Valve Section, Slew
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***10 | Valve, Section, Slew | 1 |
E4-6-1 Ram, Bucket
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***12 | Gland, Bearing | 1 |
| 23***13 | Kit-Seal, Ram | 1 |
E4-6-2 Ram, Bucket
| 55***75 | Ram, Bucket, 1/4" Bsp Ports | 1 |
| 90***81 | Bush | 1 |
| 90***83 | Bush, Eye End; San 22601.Ss To 90***81.Same Item.R Salter, P Gamble.Ref Dongyang.22/8/2006 | 1 |
E4-7-1 Ram, Ext Undercarriage, Micro
| 50***15 | Cap, End | 1 |
| 50***16 | Head, Piston | 1 |
| 50***87 | Kit, Seal | 1 |
E4-5-2 Ram, Dipper
| 55***74 | Ram, Dipper, 1/4" Bsp Ports | 1 |
| 90***81 | Bush | 1 |
| 90***82 | Rod, Piston | 1 |
E4-3-3 Ram, Swing
| 24***27 | Seal | 1 |
| 24***15 | Ring, Wear | 2 |
| 55***66 | Cylinder, Cyl/Tube Wa | 1 |
E4-3-1 Ram, Swing
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***06 | O Ring | 1 |
E4-4-1 Ram, Dozer, Micro Plus
| 55***23 | Ram, Dozer | 1 |
| 90***98 | Nipple, Grease | 2 |
| 90***99 | Cap, Grease Nipple Cover | 2 |
E4-3-4 Ram, Swing
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
E4-8-1 Ram, Dozer, Micro
| 50***36 | Bush, Bronze | 2 |
| 50***37 | Head, Piston | 1 |
| 50***38 | Cap, End | 1 |
E4-2-1 Ram, Boom
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***07 | O Ring | 1 |
| 23***04 | O Ring | 1 |
E4-4-2 Ram, Dozer
| 57***01 | Ram, Micro Dozer | 1 |
| 90***78 | Nipple, Grease | 2 |
E4-5-1 Ram, Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***13 | Kit-Seal, Ram | 1 |
| 55***45 | Ram, Assembly Dipper | 1 |
E4-1-1 Ram, Ext Undercarriage, Micro Plus
| 23***07 | O Ring | 1 |
| 23***55 | O Ring | 1 |
| 24***02 | Seal, Gland | 1 |
E4-7-2 Ram, Extension, Micro
| 33***05 | Ram, Extension | 2 |
| 57***01 | Ram, Micro Extension | 2 |
| 90***76 | Rod, Piston | 1 |
E6-1-2 Undercarraige, Hydraulics, Assembly
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
| 23***44 | Ram, Dozer | 1 |
| 23***45 | Ram, Extension | 1 |
E6-1-1 Track Motor, Single Speed, Assembly
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 16***50 | Adaptor | 2 |
F Track/Slew Gearbox
F4-2-1 Gearbox, Track, Assembly, Micro
| 50***07 | Sprocket, Drive Wheel | 1 |
| 50***70 | Gearbox, Track, Assembly | 1 |
F4-4-11 Gearbox, Track, Details, Micro
| 20***70 | Track Wheel Motor, Complete | 1 |
| 20***36 | Circlip | 1 |
| 20***37 | Plug | 2 |
F4-3-2 Gearbox, Track, Details, Micro Plus
| 20***69 | Plug, And Seal | 2 |
| 20***04 | Ring, Snap | 7 |
| 20***09 | Ring, Snap | 1 |
F4-1-1 Motor, Slew
| 20***52 | Motor, Slew | 1 |
| 20***56 | Kit, Seal | 1 |
| 20***57 | Pinion Gear Assembly | 1 |
F4-3-1 Page Superseded, See F4-4-11
| 50***86 | Gearbox, Track | 1 |
| 50***22 | Circlip | 1 |
| 50***23 | Gear, Kit ( 3 ) | 1 |
F4-1-2 Motor, Slew
| 16***50 | Adaptor | 1 |
| 20***52 | Motor, Slew | 1 |
| 20***21 | Kit-Seal, Hydraulic Motor | 1 |
F4-4-2 Motor & Sprocket,, Track Gearbox, Micro
| 13***7D | Capscrew, M10 | 8 |
| 14***8D | Washer, Spring, M10 | 8 |
| 16***53 | Adaptor; O Ring 24***06 | 4 |
F4-3-3 Gearbox, Track Assembly
| 13***7D | Capscrew, M10 | 17 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
F4-2-2 Gearbox, Track, Assembly, Micro Plus
| 13***7Z | Capscrew, Socket Head | 9 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
J Track & Running Gear, Undercarriage
J1-8-2 Track Assembly, 180mm
| 33***35 | Track, Rubber, W=180mm 37 Link | 1 |
J1-1-4 Undercarriage, Turret Assembly
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Bolt, M16x130, Dacromet | 2 |
| 14***7D | Washer, M8 Plain | 4 |
J1-6-1 Track Roller, Micro
| 50***03 | Bearing, Outer Diameter 52mm, Internal Diameter 25mm | 2 |
| 50***05 | Ring, Scraper, Internal Diameter 25mm - Outer Diameter 52mm | 2 |
| 50***20 | Roller | 1 |
J1-8-1 Track Assembly, 230mm
| 33***11 | Track, Rubber, 230 X 31 X 96 | 1 |
| 33***65 | Track, Rubber, W=230mm | 1 |
J1-5-3 Tensioner, Assembly
| 14***03 | Washer | 1 |
| 33***03 | Adjuster, Grease, Tensioner | 1 |
| 90***71 | Adapter, (Includes Grease Nipple) | 1 |
J1-3-1 Track Roller, Micro Plus
| 13***7Z | Bolt | 2 |
| 23***00 | Roller, Assembly | 6 |
| 23***50 | Shaft | 1 |
J1-5-2 Idler/Recoil Unit, Micro
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 23***14 | Track, Tensioner; Ref Dave Bickerton/Steve Hill Agreement San22, 922 | 1 |
| 33***17 | Wheel, Assembly,, Idler/Recoil | 1 |
J1-2-3 Idler/Recoil Unit, All Micros, 01.03.08
| 33***03 | Adjuster, Grease, Tensioner | 1 |
| 33***22 | Assembly, Wheel/Clevis, Idler | 1 |
J1-6-3 Guide, Track, T.I 8/207
| 13***8D | Setscrew, M12 X 30 | 8 |
| 33***28 | Guide, Track | 1 |
| 82***94 | Washer, Schnorr Heavy Duty M12 | 8 |
J1-2-2 Idler/Recoil Unit, All Micros, From 01.10.07
| 23***34 | Wheel, Idler Assembly, Abi | 1 |
| 33***20 | Fork, Idler Abi | 1 |
| 33***24 | Wheel, Idler Abi | 1 |
J1-1-1 Undercariage, Extending Micro Plus, Assembly
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 1 |
J1-7-2 Undercarriage, Assembly, Twin Ram
| 13***5D | Setscrew, M8x20 | 20 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M12 X 30 | 12 |
J1-1-2 Undercarriage, Extending Micro Plus
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
J1-2-1 Idler/Recoil Unit, Micro Plus
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 21***11 | Pin, Split | 1 |
| 22***60 | Circlip | 2 |
J1-6-2 Track Roller, Micro
| 33***15 | Roller, Track | 6 |
| 33***67 | Gasket | 1 |
| 33***68 | Shaft | 1 |
M Engine 403c-11,Hh Build,Tier 2
M1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Hh Build
| 02***41 | Gear | 1 |
| 02***42 | Key | 1 |
| 02***43 | Pin | 1 |
M1-6-2 Timing Levers,, Arms & Springs
| 02***96 | Nut | 1 |
| 02***06 | Lever | 1 |
| 02***07 | Circlip | 1 |
M1-8-1 Engine Mountings
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***9D | Screw, M12x35mm Long | 3 |
M1-1-1 Engine, Complete, 13.4kw, Hh Build
| 01***72 | Engine, Complete 403c-11, Nat/Aspirated, 18bhp | 1 |
M1-7-1 Flywheel & Housing
| 02***36 | Ring, Starter | 1 |
| 02***37 | Screw | 6 |
| 02***66 | Flywheel Backplate | 1 |
M1-6-1 Timing Case,, Camshaft & Gears
| 02***68 | Key | 1 |
| 02***78 | Nut | 4 |
| 02***81 | Bearing | 1 |
M1-5-1 Fans, Pulleys, & Fan Belt
| 02***67 | Nut | 1 |
| 02***68 | Key | 1 |
| 02***69 | Spacer, Fan | 1 |
M1-3-1 Block Assembly
| 02***01 | Plug, D=15 | 1 |
| 02***02 | Plug, D=25 | 1 |
| 02***04 | Plug, D=40mm | 2 |
M2-2-1 Rocker Assembly, Push Rods & Tappets, Hh Build
| 02***78 | Nut | 3 |
| 02***66 | Spring | 2 |
| 02***67 | Screw, Adjusting | 6 |
M2-3-1 Rocker Cover, Hh Build
| 02***73 | Breather, Gauze | 1 |
| 02***76 | Nut, Cap | 3 |
| 02***78 | Seal | 1 |
M2-4-1 Lifting Plates, Engine, Hh Build
| 02***12 | Screw | 2 |
| 02***52 | Plate, Engine Lifting | 2 |
M2-1-1 Cylinder Head
| 02***01 | Plug, D=15 | 2 |
| 02***42 | Seal, Inlet Valve | 3 |
| 02***43 | Spring, Valve | 6 |
M3-3-1 Filter, Air
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
M3-2-1 Exhaust Manifold
| 02***96 | Nut | 2 |
| 02***85 | Stud | 2 |
| 02***39 | Gasket | 1 |
M3-4-1 Exhaust System
| 02***38 | Gasket | 1 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 14***7Z | Washer, Spring | 4 |
M3-1-1 Manifold, Induction, Hh Build
M4-1-1 Pump, Water, Hh Build
| 02***96 | Nut | 1 |
| 02***89 | Plug, D=30mm | 1 |
| 02***36 | Pump, Water | 1 |
M4-4-1 Radiator & Hoses
| 22***08 | Clip, Jubilee | 2 |
| 23***14 | Clip, Snapper | 3 |
| 23***39 | G.A, Engine Build | 1 |
M4-3-1 Radiator, Fittings & Mountings
| 13***5D | Screw, M5x20 | 2 |
| 13***1D | Screw, Set M6x12 | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
M4-2-1 Thermostat, Housing, Inlet & Outlet, Hh Build
| 02***22 | Stud | 2 |
| 02***96 | Nut | 4 |
| 02***88 | Housing, Thermostat | 1 |
M5-2-1 Pump, Oil, Hh Build
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 3 |
| 02***10 | Pump, Oil & Gear Assembly | 1 |
M5-1-1 Sump, Oil, Hh Build
| 02***02 | Screw | 3 |
| 02***96 | Gasket | 1 |
| 02***97 | Screw | 20 |
M5-4-1 Filter, Oil, Hh Build
| 02***26 | Connector | 1 |
| 02***28 | Bolt, Banjo | 2 |
| 02***59 | Washer | 4 |
M6-4-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
M6-3-1 Fuel System
| 23***03 | Clip, Snapper | 5 |
| 23***14 | Clip, Snapper | 1 |
| 23***01 | Nut | 2 |
M6-2-1 Injectors, Fuel, & Injection Pipes, Hh Build
| 02***96 | Nut | 2 |
| 02***66 | Washer | 2 |
| 02***14 | Damper | 4 |
M6-1-1 Pump, Fuel Injection, & Shut-Off Solenoid, Hh Build
| 02***96 | Nut | 2 |
| 02***01 | Washer | 1 |
| 02***76 | Shim, 0.20mm | 0 |
M6-5-1 Pump, Fuel Lift
| 02***10 | Bolt | 2 |
| 02***69 | O Ring | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
M8-1-1 Gasket Sets, Hh Build
| 02***09 | Kit-Gasket, 1.2mm | 1 |
| 02***11 | Kit-Gasket, 1.3mm | 1 |
N Engine 403d-11,Gj Build,Tier 3
N1-8-1 Engine Mountings
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***9D | Screw, M12x35mm Long | 3 |
N1-4-1 Crankshaft,Pistons, Bearings & Con-Rods, 403d-11 Tier-3 From S/N Tba 03/2008
| 02***42 | Key | 1 |
| 02***43 | Pin | 1 |
| 02***52 | Bush, Small-End | 1 |
N1-3-1 Engine Block
| 02***05 | Plug, D=5.4mm | 1 |
| 02***07 | Plug, 8.4mm | 5 |
| 02***08 | Hub | 1 |
N1-5-1 Fan,Pulleys,Belt
| 02***66 | Pulley, Crankshaft | 1 |
| 02***67 | Nut | 1 |
| 02***68 | Key | 1 |
N1-7-1 Flywheel & Housing
| 02***08 | Washer | 2 |
| 02***34 | Washer, Spring | 2 |
| 02***36 | Ring, Starter | 1 |
N1-6-1 Timing Case, Camshaft & Gears
| 02***68 | Key | 1 |
| 02***81 | Bearing | 1 |
| 02***89 | Pin | 1 |
N1-1-1 Engine, Complete, 403d-11 Tier 3
| 33***50 | Engine, Complete 403d-11, Nat/Aspirated | 1 |
N1-6-2 Timing Levers, Arms & Springs
| 02***71 | Screw | 4 |
| 02***78 | Nut | 1 |
| 02***08 | Washer | 1 |
N2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***78 | Nut | 3 |
| 02***66 | Spring | 2 |
| 02***67 | Screw, Adjusting | 6 |
N2-1-1 Cylinder Head
| 02***42 | Seal, Inlet Valve | 3 |
| 02***43 | Spring, Valve | 6 |
| 02***44 | Cap | 7 |
N2-4-1 Lifting Plates, Engine
| 02***12 | Screw | 2 |
| 02***52 | Plate, Engine Lifting | 2 |
N2-3-1 Rocker Cover
| 02***73 | Breather, Gauze | 1 |
| 02***76 | Nut, Cap | 3 |
| 02***78 | Seal | 1 |
N3-4-1 Exhaust System
| 02***38 | Gasket | 1 |
| 13***8D | Setscrew, M8 X 30mm | 8 |
| 14***7Z | Washer, Spring | 4 |
N3-3-1 Filter, Air
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
N3-2-1 Exhaust Manifold
| 02***96 | Nut | 2 |
| 02***85 | Stud | 2 |
| 02***39 | Gasket | 1 |
N4-3-1 Radiator, Fittings & Mountings
| 13***5D | Screw, M5x20 | 2 |
| 13***1D | Screw, Set M6x12 | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
N4-4-1 Radiator & Hoses
| 22***08 | Clip, Jubilee | 2 |
| 23***14 | Clip, Snapper | 3 |
| 23***39 | G.A, Engine Build | 1 |
N4-2-1 Thermostat, Housing, Inlet & Outlet
| 02***96 | Nut | 1 |
| 02***85 | Stud | 4 |
| 02***89 | Plug, D=30mm | 2 |
N4-1-1 Pump, Water
| 02***96 | Nut | 1 |
| 02***33 | Hose, By-Pass | 1 |
| 02***39 | Gasket | 1 |
N5-2-1 Pump, Oil
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 3 |
| 02***10 | Pump, Oil & Gear Assembly | 1 |
N5-4-1 Filter, Oil
| 02***26 | Connector | 1 |
| 02***28 | Bolt, Banjo | 2 |
| 02***59 | Washer | 4 |
N5-1-1 Sump, Oil
| 02***02 | Screw | 3 |
| 02***96 | Gasket | 1 |
| 02***97 | Screw | 20 |
N6-4-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
N6-5-1 Pump, Fuel Lift
| 02***10 | Bolt | 2 |
| 02***69 | O Ring | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
N6-2-2 Injector,Fuel & Pipe
| 02***96 | Nut | 2 |
| 02***66 | Washer | 2 |
| 02***14 | Damper | 4 |
N6-3-1 Fuel System
| 23***03 | Clip, Snapper | 5 |
| 23***14 | Clip, Snapper | 1 |
| 23***01 | Nut | 2 |
N6-1-1 Pump,Fuel, & Solenoid
| 02***96 | Nut | 2 |
| 02***01 | Washer | 1 |
| 02***76 | Shim, 0.20mm | 1 |
MICRO PLUS-T2 serial number reference
Locate the machine identification plate on the frame or chassis structure. Verify the serial number prefix 'M' and the numeric range against the factory service manual for the Micro Plus model. Confirm applicability with a JCB dealer if the exact variant is not documented.
| Prefix | Identifies | Notes |
|---|---|---|
| M1007000 | Micro Plus | |
| M1007129 | Micro Plus Tier 3 |
Frequently asked questions
What engine does the JCB MICRO PLUS-T2 use?
The JCB MICRO PLUS-T2 uses a naturally aspirated engine with variants including 9.0 kW (12 hp) and 13.8 kW (18.5 hp) outputs.
What is the operating weight of the JCB MICRO PLUS-T2?
The standard operating weight is approximately 2,893 lb (1,312 kg), varying by configuration and attachments.
What model replaced the JCB MICRO PLUS-T2?
The MICRO PLUS-T2 was succeeded by the 8010 series mini excavator.
What MICRO PLUS-T2 owners discuss
What are the known powertrain and hydraulic behaviors for the JCB MICRO PLUS-T2?
The machine utilizes a 18 hp engine, providing higher power output compared to other same-size doorway machines rated at 12 hp. The hydraulic system is designed for high breakout force, allowing the operator to move heavy loads such as large rocks and sleepers in a single pass. The standard operating weight is 2893 lbs (1312 kg), which varies by configuration and attachments. The standard operating width is 3 ft 2 in (51 mm), and the length is 10 ft 1 in (25 mm). The dipper length is available in 3 ft 37 in (950 mm) or 3 ft 45 in (1138 mm) variants. The machine is noted for strong performance in tight spaces, including rear gardens and interior buildings.
What undercarriage or wear patterns are typical for this machine type?
The machine is equipped with rubber tracks. Common wear patterns include track degradation from abrasive materials and potential misalignment if the machine is operated on uneven terrain for extended periods. The undercarriage components, including track rollers and idlers, are sealed and not lubricable by the operator. Return oil from these components may be credited upon replacement. Operators should monitor track tension and alignment to prevent premature wear and ensure stable operation on soft or uneven ground.
What engine quirks are associated with the JCB MICRO PLUS-T2 series?
The machine uses an 18 hp engine. Common engine issues include difficulty starting in cold weather, which may require extended glow plug cycles. Black smoke during startup is typically unburned fuel from cold cranking and is not necessarily a fault. White smoke may indicate a coolant leak. The engine relies on glow plugs for cold starting; a failed glow plug relay or timer can prevent operation in cold conditions. Operators should ensure adequate fuel in the tank, as gauges may be unreliable, and check for air in the fuel lines if the engine fires briefly then dies.
What are common electrical or sensor issues reported?
Electrical issues may include faulty glow plug relays or timers, leading to hard starting in cold weather. Battery voltage must be at least 12.4V for a 12V system to ensure reliable cranking. Corrosion on battery terminals or a loose earth strap connection to the block can cause starting problems. Operators should verify that the forward/reverse lever microswitches are functioning correctly, as these activate hydraulic solenoids and disable the starting system when in gear. A failed microswitch can cause intermittent movement or failure to start.
What should be checked when buying a used MICRO PLUS-T2?
Verify the engine serial number and data plate to confirm the engine variant and tier. Check the condition of the rubber tracks, including tension and wear. Inspect the hydraulic system for leaks and test all functions for smooth operation. Ensure the glow plugs and relay are functioning correctly. Check the battery voltage and terminal condition. Verify the operation of the forward/reverse microswitches and solenoids. Inspect the air filter and fuel system for blockages or air leaks. Confirm the dipper length and attachment package match the specifications. Check for any signs of overheating or coolant leaks.
What fluids and lubricants are specified for the JCB MICRO PLUS-T2?
Use AW46 hydraulic fluid. The engine oil specification is JCB 15W/40 Multigrade for temperatures from -10°C to 50°C (14°F to 122°F). For temperatures from -15°C to 30°C (5°F to 86°F), use JCB Super Universal Agricultural oil. The fuel tank capacity is 18.3 UK gal (83.2 liters). The engine coolant capacity is 2.5 UK gal (11.1 liters). Always consult the operation and maintenance manual for precise fluid types and capacities for the specific serial range.
What safety-critical fixes require dealer verification?
Any repairs involving the hydraulic solenoids, microswitches, or starting system interlocks must be verified by a dealer to ensure proper function and safety. Engine repairs, particularly those involving the fuel injection system or glow plugs, should be performed by authorized service personnel. Track replacement and undercarriage adjustments should be verified to ensure correct tension and alignment.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb MICRO PLUS-T2. Related factory variants of the same model family:
MICRO PLUS-T2MICRO PLUS-T2
Need a specific MICRO PLUS-T2 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.