JCBagriculturalmicro
Jcb MICRO
Maintenance schedule, common problems & OEM parts breakdown
The JCB MICRO is a compact excavator class machine designed for restricted access environments including indoor work and rear gardens. The diesel 8008 CTS variant utilizes a 9kW Perkins Stage V compliant engine and weighs 950kg (2094 lb). The electric 8008E CTS variant replaces the engine with dual 4.8kW batteries for zero-emission operation. Production spans recent years with the 8008 CTS and 8008E CTS as current models. The machine features a conventional tailswing design, an extending undercarriage ranging from 700mm to 900mm width, and a tubular boom structure. Configurations include single-acting auxiliary hydraulics, ISO control patterns, and front-mounted TOPS frames.
Across the MICRO series, the primary evolution is the introduction of the electric 8008E CTS which eliminates the diesel engine and DEF/DPF requirements found in the 8008 CTS. The machine matters in the used and parts market due to its high resale value driven by the 500-hour engine oil interval and robust EcoMAX/Dieselmax engine lineage. The extending undercarriage and tubular boom design offer distinct serviceability advantages over fixed-width competitors. The electric variant introduces battery maintenance protocols while removing engine fluid service needs, creating a divergent parts demand profile between the diesel and electric generations.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb MICRO specifications
Engine
| Engine Model | 103-10 MICRO (JCB MICRO); 103-10 MICRO PLUS (JCB MICRO PLUS); Perkins (JCB 8008 CTS) |
| Gross Power | 18.2 hp (13.6 kW) (JCB MICRO; JCB MICRO PLUS) |
| Net Power | 17 hp (12.7 kW) (JCB MICRO; JCB MICRO PLUS); 9 kW (JCB 8008 CTS) |
| Displacement | 58 cu in (0.95 L) (JCB MICRO; JCB MICRO PLUS) |
| Cylinders | Not documented for this exact serial range — verify with your dealer |
| Emissions Tier | Stage V (JCB 8008 CTS) |
Weights
| Operating Weight | 2509 lb (1138 kg) (JCB MICRO); 2893 lb (1312 kg) (JCB MICRO PLUS); 950 kg (JCB 8008 CTS); 1110 kg (JCB 8010 CTS) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | 3.3 psi (22.7 kPa) (JCB MICRO); 3.1 psi (21.4 kPa) (JCB MICRO PLUS) |
Dimensions
| Transport Length | 9.58 ft (2.92 m) (JCB MICRO, Hex 1); 9.67 ft (2.95 m) (JCB MICRO, Hex 2); 9.83 ft (2.83 m) (JCB MICRO PLUS, Hex 1); 10.08 ft (3.07 m) (JCB MICRO PLUS, Hex 2) |
| Transport Width | 2.25 ft (0.69 m) (JCB MICRO); 3.17 ft (0.97 m) (JCB MICRO PLUS) |
| Transport Height | 7.5 ft (2.29 m) (JCB MICRO); 7.67 ft (2.34 m) (JCB MICRO PLUS) |
| Track Gauge | 3.25 ft (0.99 m) (JCB MICRO; JCB MICRO PLUS) |
| Ground Clearance | 0.66 ft (0.20 m) (JCB MICRO); 0.71 ft (0.22 m) (JCB MICRO PLUS) |
| Tail Swing Radius | 2.75 ft (0.84 m) (JCB MICRO; JCB MICRO PLUS) |
Performance
| Travel Speed | Not documented for this exact serial range — verify with your dealer |
| Digging Depth | 5.58 ft (1.70 m) (JCB MICRO, Hex 1); 6.17 ft (1.88 m) (JCB MICRO, Hex 2); 6.42 ft (1.96 m) (JCB MICRO PLUS, Hex 1); 7.08 ft (2.16 m) (JCB MICRO PLUS, Hex 2); 1.69 m (JCB 8008 CTS); 2.15 m (JCB 8010 CTS) |
| Max Reach Along Ground | 10.08 ft (3.07 m) (JCB MICRO, Hex 1); 10.42 ft (3.18 m) (JCB MICRO, Hex 2); 11.25 ft (3.43 m) (JCB MICRO PLUS, Hex 1); 11.5 ft (3.51 m) (JCB MICRO PLUS, Hex 2) |
| Max Loading Height | 5.75 ft (1.75 m) (JCB MICRO, Hex 1); 6.25 ft (1.91 m) (JCB MICRO, Hex 2); 8.08 ft (2.46 m) (JCB MICRO PLUS, Hex 1); 8.05 ft (2.45 m) (JCB MICRO PLUS, Hex 2) |
| Swing Speed | 8 rpm (JCB MICRO; JCB MICRO PLUS) |
| Drawbar Pull | 2023 lbf (8998 N) (JCB MICRO; JCB MICRO PLUS) |
Service capacities (summary)
| Fuel Tank | 3.9 gal (14.8 L) (JCB MICRO; JCB MICRO PLUS); 11.5 L (JCB 8008 CTS) |
| Hydraulic System | 5.5 gal (20.8 L) (JCB MICRO; JCB MICRO PLUS) |
| Engine Oil | 0.9 gal (3.4 L) (JCB MICRO; JCB MICRO PLUS) |
| Cooling System | 1.3 gal (4.9 L) (JCB MICRO; JCB MICRO PLUS) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
MICRO fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 3.9 L (1.0 US gal) | JCB 15W/40 Multigrade (-10°C to 50°C / 14°F to 122°F); JCB 10W/30 Multigrade for first 100 hours of new/reconditioned engine operation |
| Cooling System | 1.3 L (0.3 US gal) | JCB Engine Coolant |
| Fuel Tank | 5.5 L (1.5 US gal) | Diesel Oil |
| Hydraulic System and Tank | 0.9 L (0.2 US gal) | JCB Special Hydraulic Fluid (up to 30°C / 86°F) or JCB Hydraulic Fluid 46 (over 30°C / 86°F) |
| Grease | N/A | JCB HD90 Gear Oil (API-GL-5, MIL-L-2105D) or JCB Blue Grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb MICRO maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the MICRO beyond the schedule
Predictive Maintenance & Fluid Analysis
JCB MICRO maintenance relies on the 500-hour oil change interval which reduces service frequency compared to competitors. Collect baseline oil samples from the engine, hydraulic tank, axle, and final drive at the first 500-hour service. Compare subsequent samples against this baseline to detect bearing wear or contamination early. Inspect the hydraulic return filter magnet for metallic debris during every 500-hour service. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specifications. Monitor coolant levels daily as the tubular boom design requires precise thermal management for the Perkins or electric powertrain.
Corrective & Common Repairs
Common repairs on the diesel 8008 CTS involve the fuel system due to its common-rail injectors. Replace primary and secondary fuel filters at 500 hours to prevent injector damage. Inspect the turbocharger shaft play and wastegate function at 1000 hours. For the electric 8008E CTS, focus on battery charging contacts and 110V/230V charging circuit integrity. Check the extending undercarriage legs for binding or wear on the 25mm-thick solid steel plates. Inspect the full-width rear cast counterweight for cracks or damage from site impacts. Verify the hydraulic thumb gripping force if equipped.
Overhaul & Rebuild Points
The 2000-hour service mandates a swing ring play measurement using dial indicators on JS-series excavators and applies to MICRO swing bearings. Drain and clean the hydraulic tank thoroughly to remove sludge accumulation. Inspect the boom and arm/dipper structural welds for unauthorized welding or cracking. Check the tubular boom for hose chafing and structural integrity. Measure the undercarriage wear against JCB limits and replace track shoes or rollers as needed. Service the immersed brakes on wheeled configurations and check disc wear. Replace injector spray patterns if diagnostic tools indicate deviation.
Seasonal & Environment Servicing
In high dust environments, clean the air filter primary element more frequently based on the restriction indicator. In high temperature conditions, check the charge cooler and radiator for debris blockage. For indoor or urban work, the electric 8008E CTS offers 84 dB noise levels and zero emissions, eliminating exhaust extraction needs. The diesel 8008 CTS requires DPF monitoring if fitted, though Stage V compliance may reduce regen frequency. Store the machine under cover to protect the electrical circuits and battery terminals from corrosion. Check the blue live light indicator and foldable TOPS frame operation for safety compliance.
MICRO common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 239/00039 | G.A., Air Filter Assembly | Air intake service | Check fitment → |
| 32/919900 | Filter, Air | Air intake service | Check fitment → |
| 32/919901 | Filter, Air | Air intake service | Check fitment → |
| 32/919902 | Element, Air Filter | Air intake service | Check fitment → |
| 32/925363 | Element, 10 Micron, Diameter Of 44 Mm | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
MICRO fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Clogged primary fuel filter, weak lift pump, or air leaks in the suction line. | Replace the primary fuel filter; verify the lift pump primes at key-on; inspect suction-side lines for air leaks. |
| P0191 | Fuel rail pressure sensor performance | Erratic sensor readings due to sensor failure, poor connection, or low signal voltage. | Check the fuel filter age; test the sensor 5V reference and ground; wiggle-test the connector for intermittent faults. |
| P0335 | Crankshaft Position Sensor 'A' Circuit (No Signal) | Damaged harness, faulty sensor, or broken signal wire preventing the ECU from detecting engine speed. | Inspect the crank sensor connector and wiring harness for damage; verify sensor resistance and signal output. |
| P0697 | Torque Reduction / Limp Home (ECU Internal 5V Supply 2 auxiliary fault) | ECU internal power supply fault or critical sensor failure triggering a protective derate. | Check battery voltage and main ground points; if power is stable, the ECU may require dealer-level diagnosis or replacement. |
| P1093 | Common Rail Pressure Fault (Lack of Feed) | Fuel starvation due to blocked filters, clogged tank pickup, or failing lift pump. | Replace fuel filters; check fuel tank for contamination; verify lift pump operation and pressure. |
| P1101 | Rail Pressure Control Error (Positive fault) | Fuel pressure regulator or metering valve circuit malfunction preventing correct rail pressure. | Inspect the fuel pressure regulator connector and wiring; check for mechanical binding in the regulator mechanism. |
| U0073 | CAN Bus Off | Loss of communication between modules, often caused by low battery voltage, poor grounds, or harness damage at pivots. | Load-test the battery; clean all chassis and engine ground points; inspect the main CAN harness for chafing. |
| ENG OIL | Engine Oil Pressure Low | Low oil level, oil leak, faulty oil pressure sensor, or failing oil pump. | Check the engine oil level immediately; inspect for external leaks; test the oil pressure sensor before condemning the pump. |
| FUEL SYS | Fuel System Fault | General fuel delivery issue causing rough running, power loss, or no-start conditions. | Check the fuel filter first; listen for the lift pump prime sound; inspect the fuel tank for water or contamination. |
| DERATE | Engine Derate Active | Power is limited by the ECU as a symptom of another active fault (often emissions or thermal). | Read the active diagnostic codes to identify the root cause; fix the underlying fault; clear the code after repair. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
MICRO attachments & work tools
Standard Digging Buckets
Available in 300mm width for the 8008 CTS model, as specified in the ISO 6016 operating weight calculation. Bucket profiles include Deep Profile, Ditch Maintenance, Grading, Heavy Duty, Jaw, Ribbed, Tapered Ditching, and Tilting Grading options to suit specific job site conditions.
Hydraulic Breakers
JCB offers an OEM hydraulic breaker range designed for micro excavators to break rock before digging, protecting the machine and improving efficiency. Direct rock digging is discouraged; the breaker is intended for use with the machine's hydraulic system.
Lifting Equipment
Compact lifting equipment is available with a Q-Fit pick-up for easy attachment to the machine. The design prioritizes operator visibility for safe handling of suspended loads.
Material Handling Tools
Pallet forks and buckets are engineered for skid steer-style attachment compatibility, allowing quick task switching. These tools are designed to maximize the machine's rated operating capacity for material handling tasks.
Land Clearing & Demolition
Brush cutters and grapples are available for land clearing applications. These attachments are built for real-world productivity and durability in rough terrain operations.
Coupler & Mounting Systems
Work tools attach to the base machine using a coupler or quick coupler system. The Q-Fit pick-up is specified for lifting equipment to ensure easy attachment.
Hydraulic Kit Requirements
Hydraulic breakers and specialized tools require the machine's hydraulic system. The 8008 CTS and 8010 CTS models provide the necessary hydraulic flow for these attachments, with the 8010 CTS featuring a hydraulic thumb as standard for added versatility.
Factory Configurations & Guarding
The 8008 CTS comes standard with a 2-post TOPS frame, rubber tracks, standard dipper, standard dozer, and a 300mm bucket. The 8010 CTS includes a hydraulic thumb as standard. Extended undercarriage options are available to provide stability and enhance dig depth and reach.
All MICRO assemblies by section
Every catalogued assembly group for the Jcb MICRO. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A2-11-1 Bucket, 160mm, Low Profile
| 13***7D | Bolt, M10 X 75mm | 2 |
| 13***1Z | Nut | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
A2-8-1 Bucket, 600mm, Low Profile
| 13***1Z | Nut | 8 |
| 23***33 | Bucket, 600mm Low Profile | 1 |
| 33***53 | Sidecutter, Right Hand | 1 |
A2-3-1 Bucket, 460mm, Low Profile
| 13***1Z | Nut | 6 |
| 23***23 | Bucket, Assembly, 460mm, Low Profile | 1 |
| 33***53 | Sidecutter, Right Hand | 1 |
A2-2-1 Bucket, 400mm, Low Profile
| 13***1Z | Nut | 6 |
| 23***22 | Bucket, Assembly, 400mm, Low Profile | 1 |
| 33***53 | Sidecutter, Right Hand | 1 |
A2-5-1 Bucket, General Purpose
| 13***1Z | Nut | 0 |
| 52***00 | Bucket, 230mm | 1 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 0 |
A2-1-1 Bucket, 300mm, Low Profile
| 13***1Z | Nut | 4 |
| 23***21 | Bucket, Assembly, 300mm, Low Profile | 1 |
| 33***53 | Sidecutter, Right Hand | 1 |
A2-7-1 Bucket, Ditch Cleaning
| 52***00 | Bucket, 900mm Ditching | 1 |
| 52***00 | Bucket, 760mm Ditching | 1 |
A2-4-1 Bucket, General Purpose
| 13***1Z | Nut | 0 |
| 52***00 | Bucket, 230mm | 1 |
| 52***02 | Tooth; For Items 1 To 5. 52***02 Can Be Replaced With 33***56 Plus 82***11 And 13***1z, Tooth | 0 |
A2-6-1 Bucket, Ditch Cleaning
| 52***00 | Bucket, 760mm Ditching | 1 |
A3-1-2 Auger And Extension
| 98***10 | Tool, Pilot Bit | 1 |
| 98***00 | Tool, Auger, 101mm Dia. | 1 |
| 98***01 | Tooth | 1 |
A3-5-1 Kit, Hammer Auxiliary, 980/89486
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 33***12 | Pipe, Assembly, Auxiliary | 1 |
| 45***47 | Coupling, 1.1/16" 12 Unf, Female Quick Release | 1 |
A3-1-1 Earth Drill
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***04 | Adapter, Male/Male | 1 |
A4-2-1 Blade, Dozer, Micro
| 50***08 | Pin | 1 |
| 50***11 | Guard, Protection Plate | 1 |
| 50***12 | Bush, Bronze | 2 |
A4-2-3 Dozer, Assembly
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***5D | Bolt, M10x65 | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
A4-2-4 Dozer, Extensions
| 33***20 | Pin, Retaining | 2 |
| 33***06 | Blade, Left Hand Wing | 1 |
| 33***07 | Blade, Right Hand Wing | 1 |
A4-2-2 Blade, Dozer, Micro
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***1D | Nut, M8 | 6 |
A4-1-1 Blade, Dozer, Micro Plus
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 6 |
| 13***0Z | Bolt, M16 X 40mm | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
B Bodywork, Cab, Loader End
B1-10-3 Mainframe, Micro
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***9D | Bolt | 1 |
B1-9-1 Mainframe, 403
| 33***97 | Mainframe, 403 Engine | 1 |
B1-3-2 Bodywork
| 13***3D | Nut, Lock M5 | 4 |
| 23***10 | Cover, Engine, Assembly | 1 |
| 23***40 | Cover, Front Cowl | 1 |
B1-3-3 Console
| 13***3Z | Nut | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 1 |
B1-4-1 Engine Cover
| 13***3Z | Nut | 14 |
| 14***5Z | Washer, M5; Replaces 69***59 | 10 |
| 23***10 | Cover, Engine, Assembly | 1 |
B1-3-4 Step, Cast
| 58***06 | Step, Right Hand | 1 |
| 58***07 | Step, Left Hand | 1 |
| 82***12 | Screw, M10 X 25mmk, C/Sunk Socket Head | 6 |
B1-3-1 Bodywork
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 23***10 | Cover, Engine, Assembly | 1 |
B1-8-1 Mainframe, Cast Slewpan
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***2D | Bolt, M12 X 50mm Long | 4 |
B1-2-4 Tank, Diesel Assembly
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***3D | Capscrew, M5 X 16 Lg | 12 |
| 14***1Z | Washer, 2 Ba | 12 |
B1-10-2 Mainframe, Micro
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***9D | Bolt | 1 |
B1-2-3 Tank, Diesel
| 13***1D | Setscrew, M5 X 12mm Long | 12 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 14***5D | Washer | 12 |
B1-2-1 Tank, Diesel Fuel
| 13***4Z | Screw | 6 |
| 14***5Z | Washer, M5; Replaces 69***59 | 6 |
| 23***08 | Tank, Diesel,, (Metal) | 1 |
B1-1-1 Tank, Hydraulic
| 13***7Z | Screw, Hexagon M8 X 25 | 12 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 12 |
| 17***03 | Plug, Blanking | 1 |
B1-7-1 Mainframe, Cast Slewpan
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***9D | Bolt | 1 |
B1-6-1 Mainframe
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
| 13***09 | Capscrew | 4 |
B1-1-2 Tank, Hydraulic
| 13***1D | Screw, Set M6x12 | 6 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5D | Setscrew, M10 X 20 | 2 |
B1-4-2 Cowl, Front
| 23***40 | Cover, Front Cowl | 1 |
| 33***56 | Cover, Front Cowl; See San 10***83, Nla | 1 |
| 82***31 | Fastener, Bighead M5 | 1 |
B1-6-3 Mainframe, Cast Slewpan
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 14***1Z | Washer, 2 Ba | 3 |
B1-5-1 Counterweight
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***3Z | Nut | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B1-10-1 Mainframe, Micro Plus
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***9D | Bolt | 1 |
B2-10-1 Console
| 13***3Z | Nut | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 1 |
B2-3-1 Seat
| 40***03 | Seat, Vinyl | 1 |
| 40***04 | Kit, Seat Adjuster Rails | 1 |
B2-2-1 Front Handrail
| 13***4D | Capscrew | 6 |
| 33***17 | Pad | 2 |
| 33***49 | Frame, Front Handrail | 1 |
B2-1-2 Rear Two Post Frame
| 13***8Z | Bolt, M12 X 30 | 7 |
| 13***9Z | Bolt, M12x90mm | 2 |
| 13***3Z | Nut, M12 | 2 |
B2-1-1 Rear Two Post Frame
| 13***8Z | Bolt, M12 X 30 | 7 |
| 14***9Z | Washer | 11 |
| 23***16 | G.A. Rear 2 Post Kit | 1 |
B2-5-1 Seat Belt
| 13***9Z | Bolt, M12x90mm | 1 |
| 13***3Z | Nut, M12 | 1 |
| 40***62 | Belt, Seat | 1 |
B4-5-1 Dipper, Short & Long
| 13***5Z | Bolt | 3 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***3Z | Nut, Lock, M10 | 5 |
B4-1-1 Kingpost
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***5Z | Bolt | 1 |
| 13***9Z | Bolt, M10x90mm | 3 |
B4-2-1 Boom, Short, Micro
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 33***14 | Boom, Short | 1 |
B4-3-1 Boom, Long, Micro Plus
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 33***15 | Boom, Long | 1 |
B4-4-1 Dipper, Short & Extra Short
| 13***5Z | Bolt | 3 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***3Z | Nut, Lock, M10 | 5 |
B5-3-1 Tool Kit
| 25***03 | Ring, Key | 1 |
| 40***01 | Grease, Mpl-Ep, 400g. | 1 |
| 82***06 | Spanner, D.O.E., 1" X 1.1/8" A/F | 1 |
B5-1-1 Labels
| 81***55 | Label, Diesel | 1 |
| 81***56 | Label, Hydraulic Fluid | 1 |
| 81***92 | Label, Loader Arm, Scissor Point | 2 |
B5-2-1 Decals
| 81***79 | Decal, Slew Lock | 1 |
| 81***78 | Decal, Jcb Logo, Black | 3 |
| 81***28 | Decal, Silver Micro, Vertical | 2 |
B5-2-2 Labels, Groundcare
| 81***49 | Decal, Jcb Groundcare, 79mm X 121mm | 1 |
| 81***50 | Decal, Groundcare | 1 |
B5-3-2 Tool Kit
| 23***00 | Kit, Tools | 1 |
| 25***03 | Ring, Key | 1 |
| 27***00 | Bag, Tool | 1 |
C Electrics-Machine, Cab & Engine
C1-2-1 Harnesses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 27***43 | Shield, Harness Protection, T=1mm | 9 |
| 72***21 | Harness, Boom Worklight | 1 |
C1-5-1 Electrics, Assembly
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C1-4-1 Instrument Panel
| 33***92 | Console | 1 |
| 33***10 | Console | 1 |
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
C1-1-1 Light, Working, Boom
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Bolt, M8 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
C1-1-2 Horn
| 13***4Z | Bolt, M10x60 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-3-1 Battery, & Fuses
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C2-3-1 Motor, Starter
| 71***03 | Bush | 1 |
| 71***07 | Bush | 1 |
| 71***08 | Kit, Seals | 1 |
C2-5-1 Alternator Mountings
| 02***08 | Washer | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
| 02***73 | Bracket, Alternator Mounting | 1 |
C2-3-2 Motor, Starter
| 02***43 | Nut | 1 |
| 71***08 | Kit, Seals | 1 |
| 71***00 | Motor, Starter | 1 |
C2-4-1 Alternator
| 02***00 | Alternator, 12v-40amp | 1 |
| 02***01 | Frame, Drive End | 1 |
| 02***02 | Plate, Retainer | 1 |
C2-1-1 Electrical Equipment
| 02***56 | Switch, Oil Pressure | 1 |
| 02***00 | Solenoid, Fuel Shut-Off | 1 |
| 02***01 | Washer | 1 |
C3-1-1 Console, Instrument Panel
| 70***43 | Light, Warning Led, Battery/Glow Plug | 1 |
| 70***44 | Light, Warning Led, Oil/Water | 1 |
| 70***84 | Switch, Ignition, (Supplied With X2 Keys) | 1 |
D Controls-Machine, Engine
D1-2-1 Control Levers, Foot
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 33***02 | Block, Pivot | 2 |
D1-3-1 Control Levers, Excavator Lock
| 12***30 | Knob | 1 |
| 13***5Z | Bolt | 4 |
| 13***12 | Bolt | 1 |
D1-1-1 Control Levers, Hand
| 11***16 | Joint, Universal | 2 |
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***4D | Setscrew, 1/2 Unf X 3/4 | 4 |
D1-1-2 Rod, Control Assembly
| 13***2Z | Nut, M8 | 1 |
| 33***80 | Rod, Control | 1 |
| 82***08 | Nut, M8 Lh Thin | 1 |
D1-4-1 Slew Lock
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 21***05 | Pin, Split | 1 |
D2-1-1 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
E Hydraulics & Air
E1-1-3 Hoses, Upper Structure
| 13***9Z | Setscrew, M8x35 | 1 |
| 23***07 | Grommet, 38mm Diameter | 2 |
| 25***00 | Cover, Spiral, Sheathing | 1 |
E1-16-1 Hose And Pipework, Auxiliary, Double Acting
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***05 | Nut | 1 |
E1-2-1 Hoses And Pipework, Slew Motor
| 13***09 | Capscrew | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***08 | Washer | 4 |
E1-15-1 Hose And Pipework, Auxiliary, Single Acting
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***05 | Nut | 1 |
E1-1-4 Pipe, Return, Cast Slewpan
| 33***76 | Pipe, Return | 1 |
E1-6-1 Hoses And Pipework, Bucket Ram, Micro Plus
| 23***00 | Dipper, Assembly, Long | 1 |
| 23***00 | Dipper, Assembly, Short | 1 |
| 23***91 | Kit, Dipper Arm, Short | 1 |
E1-3-1 Hoses And Pipework, Undercarriage, Micro
| 50***17 | Adapter, Tee | 1 |
| 50***26 | Adapter, Tee | 1 |
| 50***27 | Hose | 2 |
E1-10-1 Hoses And Pipework, Rotary Coupling,Top
| 14***11 | Seal, Bonded | 7 |
| 16***51 | Adaptor | 3 |
| 16***52 | Adapter | 4 |
E1-5-1 Hoses And Pipework, Bucket Ram, Micro
| 23***00 | Dipper, Assembly, Short | 1 |
| 23***36 | Dipper, Assembly | 1 |
| 23***89 | Kit, Dipper Arm, Extra Short | 1 |
E1-4-1 Hoses And Pipework, Pump
| 13***7Z | Capscrew, Socket Head | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***52 | Adapter | 2 |
E1-3-2 Hoses And Pipework, Undercarriage, Micro
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
| 16***63 | Adaptor | 4 |
| 20***44 | Motor, Track Single Speed | 2 |
E1-1-1 Hoses & Pipework, Undercarriage, Micro Plus
| 23***04 | Sleeve, Spiral | 1 |
| 61***03 | Hose | 1 |
| 61***04 | Hose | 2 |
E1-1-2 Hose And Pipework, Upper Structure, Micro Plus
| 13***9Z | Setscrew, M8x35 | 1 |
| 23***07 | Grommet, 38mm Diameter | 2 |
| 25***00 | Cover, Spiral, Sheathing | 1 |
E2-1-2 Pump & Adapters, Main Hydraulic
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 20***90 | Pump, 6cc/Rev | 1 |
| 33***73 | Adaptor, Hydraulic Test Point, (Includes O-Ring) | 1 |
E2-4-2 Motor, Track, Micro
| 20***70 | Track Wheel Motor, Complete | 1 |
| 20***69 | Screw | 6 |
| 20***70 | Cover | 1 |
E2-3-1 Motor, Track, Held, Micro
| 50***63 | Screw | 6 |
| 50***64 | Cover | 1 |
| 50***65 | Ring, Backup | 1 |
E2-3-2 Motor, Track, Micro
| 13***5D | Capscrew, M10 X 20 | 8 |
| 16***53 | Adaptor; O Ring 24***06 | 4 |
| 20***70 | Track Wheel Motor, Complete | 1 |
E2-4-1 Motor, Track, Valve Mounting, Micro
| 50***80 | O Ring | 2 |
| 50***81 | O Ring | 1 |
| 50***82 | Valve | 1 |
E2-3-3 Page Superseded, See E2-4-2, Motor,Track Micro
| 50***47 | Motor, Hydraulic | 1 |
| 50***48 | Screw | 1 |
| 50***49 | Cover | 1 |
E2-2-2 Motor, Track, Micro Plus
| 20***37 | Capscrew, Socket Head | 6 |
| 20***17 | Valve, Assembly; San 10***35 | 1 |
| 20***19 | Kit, Swash Plate | 1 |
E2-1-1 Pump, Main Hydraulic
| 20***63 | Pump, 6cc/Rev | 1 |
| 20***90 | Pump, 6cc/Rev | 1 |
| 20***52 | Kit-Seal | 1 |
E2-1-5 Pump, Installation
| 13***7Z | Capscrew, Socket Head | 5 |
| 20***63 | Pump, 6cc/Rev | 1 |
| 20***90 | Pump, 6cc/Rev | 1 |
E3-1-1 Valve, 10 Spool
| 25***81 | 10 Spool Valve Block | 1 |
| 25***10 | Valve, Section, Slew | 1 |
| 25***11 | Valve, Section, Dipper Arm | 1 |
E3-8-1 Valve Section, Boom Swing
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 25***19 | Valve, Section, Boom Swing | 1 |
| 25***20 | Kit, Plug | 1 |
E3-3-2 Filter, Hydraulic
| 32***63 | Element, 10 Micron, Diameter Of 44 mm | 1 |
| 32***72 | Filter, Hydraulic | 1 |
| 32***06 | Filter, Head | 1 |
E3-7-2 Valve Section, Dipper Arm
| 25***11 | Valve, Section, Dipper Arm | 1 |
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
E3-6-1 Valve Section, Slew
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***07 | Kit, Arv | 1 |
E3-13-2 Valve Section, Boom
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***36 | Kit, Control | 1 |
E3-11-2 Valve Section, Dozer Blade
| 25***13 | Valve, Section, Dozer | 1 |
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
E3-8-2 Valve Section, Boom Swing
| 25***19 | Valve, Section, Boom Swing | 1 |
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
E3-10-1 Valve Section, Auxiliary
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
| 24***06 | O Ring | 1 |
| 25***14 | Valve, Section, Auxiliary | 1 |
E3-14-4 Valve, Track Gearbox
| 20***85 | Seal, O. Ring | 1 |
| 20***86 | Seal, O. Ring | 1 |
| 20***87 | Valve | 1 |
E3-4-1 Valve, Mountings
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Bolt, M10 X 45mm | 4 |
| 13***3Z | Nut, Lock, M10 | 5 |
E3-2-12 Rotary Joint, Assembly
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 14***8D | Washer, M10 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 10 |
E3-11-1 Valve Section, Dozer Blade
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***13 | Valve, Section, Dozer | 1 |
E3-12-2 Valve Section, Bucket
| 25***15 | Valve, Section, Bucket | 1 |
| 25***24 | Kit, Check Valve, Boom Priority | 1 |
| 25***25 | Kit, Seal | 1 |
E3-6-2 Valve Section, Slew
| 25***10 | Valve, Section, Slew | 1 |
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
E3-9-1 Valve Section, Track Extension
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***12 | Valve, Section, Track Extension | 1 |
E3-2-1 Rotary Joint, Micro Plus
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 12 |
E3-2-11 Rotary Joint, Micro
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 3 |
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 8 |
| 20***63 | Seal, Kit | 1 |
E3-14-3 Page Superseded, See E3-14-4, Valve,Track ,Micro
| 50***64 | Valve, Track Motor | 1 |
| 50***65 | O Ring | 101 |
| 50***66 | O Ring | 1 |
E3-3-1 Filter, Hydraulic
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***53 | Adapter | 1 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
E3-14-1 Valve Section, R.H. Track
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 16***67 | Adaptor | 1 |
| 25***06 | Kit, Mrv | 1 |
E3-10-2 Valve Section, Auxiliary
| 25***14 | Valve, Section, Auxiliary | 1 |
| 25***23 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
E3-5-1 Valve Section, L.H. Track
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 16***67 | Adaptor | 1 |
| 25***06 | Kit, Mrv | 1 |
E3-12-1 Valve Section, Bucket
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***09 | Kit, Combined Valve, Arv | 1 |
E3-1-3 Valve, 10 Spool
| 16***53 | Adaptor; O Ring 24***06 | 4 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 3 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 1 |
E3-9-2 Valve Section, Track Extension
| 25***12 | Valve, Section, Track Extension | 1 |
| 25***20 | Kit, Plug | 1 |
| 25***25 | Kit, Seal | 1 |
E3-14-2 Valve Section, R.H. Track
| 25***16 | Valve, Section, R.H. Track | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***29 | Kit, Plug | 1 |
E3-5-2 Valve Section, L.H. Track
| 25***17 | Valve, Section, L.H. Track | 1 |
| 25***25 | Kit, Seal | 1 |
| 25***29 | Kit, Plug | 1 |
E3-13-1 Valve Section, Boom
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***09 | Kit, Combined Valve, Arv | 2 |
E3-2-10 Rotary Joint, Micro
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 8 |
| 45***72 | Joint, Rotary 7 Port | 1 |
E3-2-9 Rotary Joint, Micro
| 33***79 | Kit, Seals, Grey + Black | 1 |
| 50***17 | Adapter, Tee | 1 |
| 50***34 | Adapter, 90 Degree | 1 |
E3-1-2 Adapters, Valve Block Kit
| 16***53 | Adaptor; O Ring 24***06 | 4 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 3 |
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 1 |
E3-7-1 Valve Section, Dipper Arm
| 16***63 | Adaptor | 1 |
| 16***65 | Adapter | 1 |
| 25***08 | Kit, Arv | 1 |
E4-7-1 Ram, Ext Undercarriage, Micro
| 50***15 | Cap, End | 1 |
| 50***16 | Head, Piston | 1 |
| 50***87 | Kit, Seal | 1 |
E4-7-2 Ram, Extending, Undercarriage
| 33***05 | Ram, Extension | 2 |
| 57***01 | Ram, Micro Extension | 2 |
| 90***76 | Rod, Piston | 1 |
E4-4-2 Ram, Dozer
| 57***01 | Ram, Micro Dozer | 1 |
| 90***78 | Nipple, Grease | 2 |
E4-5-2 Ram, Dipper
| 55***74 | Ram, Dipper, 1/4" Bsp Ports | 1 |
| 90***81 | Bush | 1 |
| 90***82 | Rod, Piston | 1 |
E4-3-1 Ram, Swing
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***06 | O Ring | 1 |
E4-5-3 Ram, Dipper
| 55***89 | Ram, Dipper | 1 |
E4-6-2 Ram, Bucket
| 55***75 | Ram, Bucket, 1/4" Bsp Ports | 1 |
| 90***81 | Bush | 1 |
| 90***83 | Bush, Eye End; San 22601.Ss To 90***81.Same Item.R Salter, P Gamble.Ref Dongyang.22/8/2006 | 1 |
E4-2-1 Ram, Boom
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***07 | O Ring | 1 |
| 23***04 | O Ring | 1 |
E4-5-1 Ram, Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***13 | Kit-Seal, Ram | 1 |
| 55***45 | Ram, Assembly Dipper | 1 |
E4-3-4 Ram, Swing
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
E4-4-1 Ram, Dozer, Micro Plus
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-3-2 Ram, Swing
| 55***51 | Ram, Swing 50 X 25 | 1 |
| 55***66 | Ram, Swing | 1 |
| 81***34 | Pin, Pivot | 1 |
E4-3-3 Ram, Swing
| 24***27 | Seal | 1 |
| 24***15 | Ring, Wear | 2 |
| 55***66 | Cylinder, Cyl/Tube Wa | 1 |
E4-1-1 Ram, Ext Undercarriage, Micro Plus
| 23***07 | O Ring | 1 |
| 23***55 | O Ring | 1 |
| 24***02 | Seal, Gland | 1 |
E4-8-1 Ram, Dozer, Micro
| 50***36 | Bush, Bronze | 2 |
| 50***37 | Head, Piston | 1 |
| 50***38 | Cap, End | 1 |
E4-6-1 Ram, Bucket
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***12 | Gland, Bearing | 1 |
| 23***13 | Kit-Seal, Ram | 1 |
F Track/Slew Gearbox
F4-4-11 Gearbox, Track, Details, Micro
| 20***70 | Track Wheel Motor, Complete | 1 |
| 20***36 | Circlip | 1 |
| 20***37 | Plug | 2 |
F4-3-1 Page Superseded, See Page F4-4-11, Gearbox, Track, Details, Micro
| 20***70 | Track Wheel Motor, Complete | 1 |
| 50***86 | Gearbox, Track | 1 |
| 50***22 | Circlip | 1 |
F4-4-2 Gearbox, Track, Assembly, Micro
| 13***7D | Capscrew, M10 | 8 |
| 14***8D | Washer, Spring, M10 | 8 |
| 16***53 | Adaptor; O Ring 24***06 | 4 |
F4-1-2 Motor, Slew
| 16***50 | Adaptor | 1 |
| 20***52 | Motor, Slew | 1 |
| 20***21 | Kit-Seal, Hydraulic Motor | 1 |
F4-1-1 Motor, Slew
| 20***64 | Slew Motor | 1 |
| 20***56 | Kit, Seal | 1 |
| 20***57 | Pinion Gear Assembly | 1 |
F4-5-1 Track Motor, Assembly
| 13***7D | Capscrew, M10 | 17 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
F4-3-3 Page Superseded, See Page F4-4-11, Gearbox, Track, Details, Micro
| 50***86 | Gearbox, Track | 1 |
| 50***22 | Circlip | 1 |
| 50***23 | Gear, Kit ( 3 ) | 1 |
F4-3-2 Gearbox, Track, Details, Micro Plus
| 20***69 | Plug, And Seal | 2 |
| 20***04 | Ring, Snap | 7 |
| 20***09 | Ring, Snap | 1 |
F4-2-2 Gearbox, Track, Assembly, Micro Plus
| 13***7Z | Capscrew, Socket Head | 9 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
F4-2-1 Page Superseded, See Page F4-4-2, Gearbox, Track, Assembly, Micro
| 50***07 | Sprocket, Drive Wheel | 1 |
| 50***70 | Gearbox, Track, Assembly | 1 |
J Track & Running Gear, Undercarrage
J1-9-1 Undercarriage, Extending
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 1 |
J1-2-4 Grease, Tensioner
| 14***03 | Washer | 1 |
| 23***51 | Seal, O Ring | 1 |
| 24***04 | Seal, Wiper, 40mm Rod | 1 |
J1-4-1 Undercarriage, Extending, Micro
| 21***09 | Dowel | 2 |
| 23***00 | Ring, Slew | 1 |
| 23***55 | Undercarriage | 1 |
J1-2-3 Recoil Unit, Micro Plus
| 14***03 | Washer | 1 |
| 23***51 | Seal, O Ring | 1 |
| 24***04 | Seal, Wiper, 40mm Rod | 1 |
J1-8-1 Track Assembly
| 23***01 | Track, Assembly, Rubber | 1 |
| 33***11 | Track, Rubber, 230 X 31 X 96 | 1 |
| 33***65 | Track, Rubber, W=230mm | 1 |
J1-6-2 Track Roller, Micro
| 33***15 | Roller, Track | 6 |
| 33***67 | Gasket | 1 |
| 33***68 | Shaft | 1 |
J1-4-2 Undercarriage, Extending,Micro
| 33***24 | Pad, Wear | 11 |
| 33***25 | Pad, Wear | 1 |
| 33***26 | Plate, Retaining | 1 |
J1-8-2 Track Assembly, Options
| 33***13 | Track, Rubber | 1 |
| 33***35 | Track, Rubber, W=180mm 37 Link | 1 |
J1-5-2 Idler/Recoil Unit, Micro
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 23***14 | Track, Tensioner; Ref Dave Bickerton/Steve Hill Agreement San22, 922 | 1 |
| 33***17 | Wheel, Assembly,, Idler/Recoil | 1 |
J1-2-5 Grease, Adaptor
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 20***03 | Spring | 1 |
| 23***02 | Spring Locating Plug | 1 |
J1-2-2 Idler/Recoil Unit, Micro Plus
| 13***9D | Screw, M12x35mm Long | 4 |
| 14***9D | Washer, M12 | 4 |
| 23***00 | Wheel, Track Tensioner, Assembly | 1 |
J1-1-1 Undercarriage, Extending
| 13***5D | Setscrew, M8x20 | 20 |
| 13***8D | Setscrew, M12 X 30 | 12 |
| 14***07 | Washer, Hardened | 20 |
J1-3-1 Track Roller, Micro Plus
| 13***7Z | Bolt | 2 |
| 23***00 | Roller, Assembly | 6 |
| 23***50 | Shaft | 1 |
J1-6-1 Track Roller, Micro
| 50***03 | Bearing, Outer Diameter 52mm, Internal Diameter 25mm | 2 |
| 50***05 | Ring, Scraper, Internal Diameter 25mm - Outer Diameter 52mm | 2 |
| 50***20 | Roller | 1 |
J1-7-1 Undercarriage, Assembly, Micro
| 50***09 | Pin | 2 |
| 50***10 | Pin | 2 |
| 50***18 | Cover | 2 |
J1-1-2 Undercarriage, Extending, Micro Plus
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
J1-7-2 Undercarriage, Assembly, Micro
| 33***24 | Pad, Wear | 8 |
| 33***25 | Pad, Wear | 8 |
| 33***29 | Plate, Cover | 2 |
J1-5-1 Idler/Recoil Unit, Micro
| 50***01 | Bearing | 2 |
| 50***02 | Spring | 1 |
| 50***04 | Ring, Scraper | 2 |
J1-2-1 Idler/Recoil Unit, Micro Plus
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 21***11 | Pin, Split | 1 |
| 22***60 | Circlip | 2 |
J1-5-5 Idler Wheel & Yoke, Components
| 33***36 | Plug | 1 |
| 33***22 | Wheel, Idler With Brackets | 1 |
| 33***35 | Wheel, Idler | 1 |
J1-6-3 Guide, Track, T.I 8/207
| 13***8D | Setscrew, M12 X 30 | 8 |
| 33***28 | Guide, Track | 1 |
| 82***94 | Washer, Schnorr Heavy Duty M12 | 8 |
L Engine 103.10
L1-7-1 Flywheel & Housing
| 02***08 | Washer | 2 |
| 02***34 | Washer, Spring | 1 |
| 02***36 | Ring, Starter | 1 |
L1-1-1 Engine, Complete, Kd Build
| 01***01 | Engine, Complete 103-10, Nat/Aspitrated,18bhp | 1 |
L1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***40 | Crankshaft, Assembly | 1 |
| 02***41 | Gear | 1 |
| 02***42 | Key | 1 |
L1-6-2 Timing Levers,, Arms & Springs
| 02***96 | Nut | 3 |
| 02***06 | Lever | 1 |
| 02***07 | Circlip | 2 |
L1-3-1 Block Assembly
| 02***01 | Plug, D=15 | 1 |
| 02***02 | Plug, D=25 | 1 |
| 02***03 | Plug, D=35 | 2 |
L1-4-2 Crankshaft, Bearings, Pistons & Con-Rods
| 02***40 | Crankshaft, Assembly | 1 |
| 02***41 | Gear | 1 |
| 02***42 | Key | 1 |
L1-2-1 Engine, Short
| 02***00 | Engine, Short | 1 |
L1-8-2 Engine Mountings
| 13***5D | Setscrew, M10 X 20 | 5 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 14***08 | Washer, 'P' | 6 |
L1-6-1 Timing Case, Camshaft & Gears
| 02***68 | Key | 1 |
| 02***78 | Nut | 4 |
| 02***79 | O Ring | 1 |
L1-7-2 Flywheel & Housing
| 02***08 | Washer | 2 |
| 02***34 | Washer, Spring | 2 |
| 02***36 | Ring, Starter | 1 |
L1-8-1 Engine Mountings
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
L1-5-1 Fans, Pulleys, & Fan Belt
| 02***67 | Nut | 1 |
| 02***68 | Key | 1 |
| 02***69 | Spacer, Fan | 1 |
L2-4-1 Lifting Plates, Engine
| 02***12 | Screw | 2 |
| 02***52 | Plate, Engine Lifting | 2 |
L2-3-1 Cover, Rocker
| 02***73 | Breather, Gauze | 1 |
| 02***74 | Plate | 1 |
| 02***76 | Nut, Cap | 3 |
L2-2-1 Rocker Assembly
| 02***78 | Nut | 3 |
| 02***51 | Cap | 6 |
| 02***59 | Shaft, Rocker | 1 |
L2-1-1 Cylinder Head
| 02***01 | Plug, D=15 | 2 |
| 02***41 | Valve, Inlet | 3 |
| 02***42 | Seal, Inlet Valve | 3 |
L3-4-1 Exhaust System
| 02***38 | Gasket | 1 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 14***7Z | Washer, Spring | 4 |
L3-1-1 Manifolds, Induction/Exhaust
| 02***96 | Nut | 2 |
| 02***85 | Stud | 2 |
| 02***39 | Gasket | 1 |
L3-3-1 Filter, Air
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
L4-1-1 Pump & Thermostat
| 02***95 | Screw | 1 |
| 02***96 | Nut | 1 |
| 02***22 | Screw | 1 |
L4-4-1 Radiator & Hoses
| 22***08 | Clip, Jubilee | 2 |
| 30***01 | Cap, Radiator, Single Seal, 0.5bar | 1 |
| 30***91 | Radiator, Assembly | 1 |
L4-3-1 Radiator,, Fittings & Mountings
| 13***5D | Screw, M5x20 | 2 |
| 13***1D | Screw, Set M6x12 | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
L5-2-1 Pump, Oil
| 02***07 | Spring | 1 |
| 02***08 | Dowel | 1 |
| 02***10 | Pump, Oil & Gear Assembly | 1 |
L5-1-1 Sump, Oil
| 02***02 | Screw | 3 |
| 02***96 | Gasket | 1 |
| 02***97 | Screw | 20 |
L5-3-1 Filter, Oil
| 02***26 | Connector | 1 |
| 02***27 | Pipe, Oil Delivery | 1 |
| 02***28 | Bolt, Banjo | 2 |
L6-4-1 Filter, Fuel
| 20***04 | Bowl, Glass | 1 |
| 20***06 | Seal | 1 |
| 20***07 | Bolt, Centre | 1 |
L6-6-1 Filter,, Fuel Sediment
| 13***8Z | Bolt, M10 X 30 | 2 |
| 23***00 | Bracket, Sedimentor | 1 |
| 32***02 | Nut, Cap | 1 |
L6-2-1 Injectors, Fuel, & Injection Pipes
| 02***96 | Nut | 2 |
| 02***66 | Washer | 2 |
| 02***70 | Injector, Assembly | 1 |
L6-1-1 Pump, Fuel Injection, & Shut-Off Solenoid
| 02***96 | Nut | 2 |
| 02***22 | Washer, Thrust | 1 |
| 02***31 | Holder | 3 |
L6-5-1 Fuel Lift Pump
| 02***10 | Bolt | 2 |
| 02***69 | O Ring | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
L6-3-1 Fuel System
| 23***03 | Clip, Snapper | 5 |
| 23***14 | Clip, Snapper | 1 |
| 23***01 | Nut | 2 |
L8-1-1 Gasket Set
| 02***32 | Seal, Rear Oil | 1 |
| 02***79 | O Ring | 1 |
| 02***87 | Gasket | 1 |
Frequently asked questions
What engine does the JCB MICRO 8008 CTS use?
The JCB 8008 CTS uses a 9kW Perkins engine compliant with Stage V emissions standards. It does not require a Diesel Particulate Filter (DPF).
What is the operating weight of the JCB MICRO?
The standard operating weight for the JCB 8008 CTS is 950kg (2094 lb). The electric 8008E CTS variant weighs approximately 1 tonne.
What replaced the JCB MICRO series?
The JCB MICRO series is succeeded by the 8008 CTS and the electric 8008E CTS variants within the JCB E-TECH range. The 8010 CTS serves as a larger micro excavator option.
What MICRO owners discuss
What are the common powertrain and hydraulic behaviors reported for early JCB Micro models?
Early JCB Micro models (circa 2004, known as the 8010) may exhibit jerky or slow tracking where the machine remains motionless for a second before lurching forward. This behavior is often associated with hydraulic pump issues caused by scavenging oil from persistent track leaks. Operators of older Micro units (e.g., 8008) frequently report insufficient power compared to competitors like the Kubota K008, describing the driving experience as difficult or punishing.
What undercarriage or wear patterns are typical for the JCB Micro series?
The JCB 8008 CTS Micro Excavator features an extended undercarriage designed to provide stability and enhance dig depth and reach. However, older Micro models have been criticized for having pipes hanging loosely in the undercarriage area, which can be prone to damage. Track oil leaks, particularly on the right-hand side, are a noted issue requiring regular topping up.
What engine quirks are associated with the JCB Micro series?
The JCB 8008 CTS Micro Excavator is equipped with an engine producing 9 kW (12.7 hp) of power. The JCB 8010 CTS Micro Excavator features an engine with 13.8 kW of power. Owners of the 8008 have noted that it lacks power compared to similar-sized Kubota machines. General JCB engine troubleshooting indicates that early Dieselmax engines (Tier 2/3) are prone to big end bearing failures if oil intervals are stretched, while later common rail engines are sensitive to fuel quality and injector faults.
What are common electrical or sensor issues on JCB Micro machines?
JCB Micro machines utilize a double dead-man switch system that requires specific operator input to start. The machine will not start unless the seatbelt is plugged in and pulled with sufficient tension. If the belt is plugged in without being pulled, the machine will not start, triggering alarms and beeps. Additionally, older JCB models (like the 3CX) use microswitches for forward/reverse selection that can fail, causing the machine to rev but not move in the selected direction.
What should be checked when buying a used JCB Micro?
When inspecting a used JCB Micro, verify the condition of the undercarriage pipes for hanging or damage. Check for track oil leaks, particularly on the right-hand side, and ensure the hydraulic system is not scavenging oil due to low levels. Test the dead-man switch and seatbelt safety interlock to ensure the machine starts correctly only when the belt is properly engaged. For older models, check the forward/reverse microswitches and solenoids for electrical faults that cause loss of drive in one direction.
What are the key specifications for the JCB 8008 CTS Micro Excavator?
The JCB 8008 CTS Micro Excavator has an operating weight of 950 kg (2,094 lb) and a maximum dig depth of 1.69 m (5.5 ft). It features a conventional tailswing and an engine power of 9 kW (12.7 hp). The machine is designed for restricted spaces and includes an extended undercarriage for stability.
What are the key specifications for the JCB 8010 CTS Micro Excavator?
The JCB 8010 CTS Micro Excavator has an operating weight of 1,110 kg (2,447 lb) and a maximum dig depth of 2.15 m (7.1 ft). It features a conventional tailswing and an engine power of 13.8 kW (18.5 hp). The machine is designed for high performance in restricted areas and comes with a hydraulic thumb as standard.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb MICRO. Related factory variants of the same model family:
MICROMICRO
Need a specific MICRO part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.