JCBagriculturaljs tracked excavators
Jcb JS260
Maintenance schedule, common problems & OEM parts breakdown
The JCB JS260 is a mid-size tracked excavator in the JS series, produced from approximately 1998 onward (from machine no. the OEM part reference). It is powered by an Isuzu 4HK1X turbocharged, water-cooled diesel engine meeting Tier 4i emissions standards, delivering 187 HP (139 kW) net power. Operating weight ranges from 56,979 lbs (25,845 kg) depending on configuration. The JS260 succeeded earlier JS-series models and was followed by newer JS-series generations. Configurations include standard and long-reach booms, various stick lengths, and undercarriage options with 9 lower rollers and 2 upper rollers per side.
Across JS-series generations, the JS260 transitioned from earlier Tier 2/3 engines to the Isuzu 4HK1X with Tier 4i compliance, eliminating the need for DEF or DPF regeneration. This change extended engine oil intervals to 500 hours, a key selling point for contractors. The machine remains relevant in the used and parts market due to its robust Isuzu powertrain, simple hydraulic architecture, and widespread availability of service manuals (Publication No. the OEM part reference). Its 500-hour oil interval reduces downtime compared to competitors with 250-hour schedules, making it a cost-effective choice for earthmoving and utility work.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb JS260 specifications
Engine
| Model | Isuzu 4HK1X |
| Type | Water cooled, 4-stroke, 4-cylinder in-line, direct injection, turbocharged diesel |
| Displacement | 316.9 cu in (5193.1 cc) |
| Gross Power | 198.3 HP (147.9 kW) |
| Net Power | 187 HP (139 kW) @ 2000 rpm |
| Emissions Tier | Tier 4i |
Weights
| Operating Weight | 56979 lbs (25845 kg) |
| Operating Weight (Max) | 62944 lbs (28560 kg) |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 397.2 in (1008.9 cm) |
| Transport Width | 126.0 in (320.0 cm) |
| Transport Height | 117.6 in (298.7 cm) |
| Tail Swing Radius | 118.8 in (301.8 cm) |
| Track Shoe Width | 27.6 in (70.1 cm) |
| Ground Clearance | 19.2 in (48.8 cm) |
| Undercarriage Length | 15.23 ft (464.2 cm) |
Performance
| Max Dig Depth | 226 in (573 cm) |
| Max Reach at Ground | 354.0 in (899.2 cm) |
| Max Dump Height | 242.4 in (615.7 cm) |
| Max Cutting Height | 349.2 in (887.0 cm) |
| Swing Speed | 10.6 RPM |
| Travel Speed | 3.5 mph (5.6 km/h) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
| Drawbar Pull | Not documented for this exact serial range — verify with your dealer |
Forces
| Bucket Digging Force | Not documented for this exact serial range — verify with your dealer |
| Stick/Arm Digging Force | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 90.7 gal (343.3 l) |
| Hydraulic System/Tank | 63.7 gal (241.1 l) |
| Engine Oil | 6.9 gal (26.1 l) |
| Cooling System | 7.1 gal (26.9 l) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
JS260 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 26.1 l (6.9 gal) | JCB engine oil (for non-DPF hardware) or JCB Advanced engine oil (for DPF equipped low-emission engines); viscosity -10 C to 50 C (14 F to 122 F) |
| Cooling system | 26.9 l (7.1 gal) | JCB approved coolant (silicate-based corrosion protection; change at recommended service intervals) |
| Fuel tank | 343.3 l (90.7 gal) | Diesel Oil (See Types of Fuel) |
| Hydraulic system total AND hydraulic tank | 241.1 l (63.7 gal) | Genuine JCB hydraulic oil (high anti-wear performance, high thermal and oxidation stability, outstanding demulsibility, foam, air release, hydrolytic stability and filterability) |
| Final drive (each) | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Swing drive | 6.1 l (1.6 gal) | Not specified in source text |
| Pilot/other circuits if listed | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease (spec only) | N/A | JCB grease (long-life protection, outstanding performance in challenging environments, significant load handling capacity; JCB boom grease or JCB blue grease) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb JS260 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 100 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the JS260 beyond the schedule
Predictive Maintenance & Fluid Analysis
At 500 hours, take oil samples from the engine, hydraulic system, and final drives to establish a baseline. The Isuzu 4HK1X engine uses 21.5 liters (4.72 UK gal) of oil; monitor for soot and fuel dilution. Hydraulic oil capacity is approximately 63.7 gallons (241.1 liters); check the return filter magnet for metallic debris. At 1000 hours, interpret samples against the baseline to extend or compress intervals. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specs. Hydraulic system relief pressure is 4975 psi (343 bar); deviations indicate pump or valve wear.
Corrective & Common Repairs
Common JS260 issues include track sag and roller wear; measure undercarriage at 500 hours against JCB limits. Replace drive belts and inspect tensioners at 100 hours. The Isuzu 4HK1X turbocharger requires shaft play and boot condition checks at 1000 hours. Hydraulic hose chafing at the kingpost and boom pins is frequent; inspect during weekly greasing. Slew ring bolts are critical; torque check at 1000 hours and after any structural incident. Battery is 2 x 12 V; check electrolyte on non-sealed units. Alternator is 50 A; load test at 1000 hours.
Overhaul & Rebuild Points
At 2000 hours, measure swing ring play for radial and axial clearance; excessive play indicates bearing wear. Inspect boom, arm, and chassis for cracks or unauthorized welding. Check brake disc wear and immersed brake condition. Test injector spray patterns via diagnostic tool; replace if out of spec. The hydraulic tank must be cleaned during the 2000-hour oil change. Engine overhaul intervals depend on oil analysis results; typical Isuzu 4HK1X overhaul occurs at 10,000–15,000 hours with proper maintenance. Track gearbox uses JCB HD90 Gear Oil; check for leaks and contamination.
Seasonal & Environment Servicing
In cold climates, use JCB-spec long-life coolant and verify antifreeze concentration. Warm up the Isuzu 4HK1X engine before applying heavy loads to prevent accelerated wear. In dusty environments, inspect the air filter primary element more frequently; replace or clean per restriction indicator. Check hydraulic oil temperature; the cooling system capacity is 7.1 gallons (26.9 liters). In high-humidity areas, check for water contamination in fuel filters. Store the machine under cover to protect the cab HVAC and electrical harnesses. Clean the undercarriage monthly to prevent debris buildup and corrosion.
JS260 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925838 | Element, Fuel Filter, Cartridge | Fuel system service | Check fitment → |
| 32/925869 | Element, Fuel Sediment Filter, Cartridge | Fuel system service | Check fitment → |
| 32/925868 | Filter, Fuel Sediment, Assembly 5 Micron | Fuel system service | Check fitment → |
| 32/926053 | Filter, Fuel | Fuel system service | Check fitment → |
| 32/926081 | Filter, Fuel Dual, 4-Way Ports | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
JS260 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Fuel filter blockage, lift pump failure, or pressure regulator fault | Check fuel filter condition and fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor, shorted wiring, or poor connector contact | Inspect sensor wiring harness and connector pins for corrosion or damage |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low engine oil level | Verify engine oil level and test sensor signal output |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Open circuit in reductant injector wiring or faulty injector | Check injector connector and wiring for damage or corrosion |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus communication failure, loose connector, or low battery voltage | Check battery voltage, ground straps, and CAN bus connectors |
| 101 | Low transmission clutch pressure detected | Hydraulic system pressure loss or transmission clutch fault | Check hydraulic fluid levels and transmission pressure settings |
| P0335 | Crankshaft Position Sensor "A" Circuit No Signal | Faulty crank sensor, damaged wiring, or sensor gap issue | Inspect crank sensor and wiring harness for damage |
| P0102 | MAF (Mass Air Flow) Low Voltage Fault | Faulty MAF sensor, clogged air filter, or intake leak | Check air filter condition and MAF sensor connections |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
JS260 attachments & work tools
Buckets
Standard bucket capacity ranges from 0.8 m³ (0.82 cu yd) to 1.5 m³ (1.56 cu yd), with a maximum capacity of 1.5 m³ (1.56 cu yd) and a reference capacity of 1.1 m³ (1.1 cu yd). Widths for the 26-32 ton class typically range from 610 mm (24 in) to 1524 mm (60 in) depending on the specific wedge or pin-on design. The JS260 Series includes a quick-hitch system for attachment changes, supporting both pin-on and coupler configurations.
Hydraulic hammers
The JS260 is equipped with an 'Extra hydraulic function' and 'Hammer function' option, indicating compatibility with medium-to-large class breakers. The machine utilizes a variable flow load sensing hydraulic system with a pump flow capacity of 431 LPM (114.2 GPM) to support high-flow breaker operations. Operating weight of 25845 kg (56979 lbs) supports breakers in the 2.5 to 4.0 ton class.
Quick couplers
The JS260 Series is equipped with a JS range quick-hitch system designed for quick and simple attachment connection. The system supports variable center pin-grabber couplers for secure attachment retention. Compatibility extends to standard wedge-style quick couplers used in the 26-32 ton excavator class.
Thumbs/grapples
Aftermarket thumbs and grapples are available for the JS260, typically matching the 26-32 ton weight class specifications. Compatible attachments include brush grapples, log forks, and mechanical thumbs designed for the specific pin geometry and hydraulic flow requirements of the JS260.
Rippers
Excavator rippers and scarifiers are available for the JS260, designed for the 26-32 ton class. These attachments are compatible with the machine's quick-hitch system and hydraulic circuitry for effective ground penetration and material breaking.
Hydraulic-kit notes
The JS260 features a variable flow load sensing hydraulic system with a maximum pump flow of 431 LPM (114.2 GPM) and a relief valve pressure of 343 Bar (4975 psi). High-flow attachments such as hydraulic hammers require the 'Hammer function' option and appropriate auxiliary hydraulic lines. The hydraulic system capacity is 241.1 L (63.7 gal).
All JS260 assemblies by section
Every catalogued assembly group for the Jcb JS260. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A2-3-1 Bucket, 900mm Wide, 0.485 Cubic Metres. Long Reach Build
| 51***02 | Pin, Locking | 4 |
| 98***19 | Casting, Left Hand Corner | 1 |
| 98***21 | Casting, Right Hand Corner | 1 |
A2-1-1 Bucket, 600mm Wide, 0.275 Cubic Metres. Long Reach Build
| 51***02 | Pin, Locking | 3 |
| 98***19 | Casting, Left Hand Corner | 1 |
| 98***21 | Casting, Right Hand Corner | 1 |
A2-8-1 Bucket, Gp, 1600 Wide, 1.46 Cubic Metres
| 51***04 | Pin, Locking, V29 | 6 |
| 98***42 | Gp Bucket 1600 Wide, 98***42 | 1 |
| 99***37 | Tooth, V29 Series, Syl | 6 |
A2-9-1 Bucket, Heavy Duty, 1450 Wide
| 33***11 | Adapter, V33 | 4 |
| 54***15 | Adapter, Tooth, V33, Left Hand Corner | 1 |
| 54***16 | Adapter, Tooth, V33, Right Hand Corner | 1 |
A2-5-1 Bucket, Gp, 1100 Wide, 1.01 Cubic Metres
| 51***04 | Pin, Locking, V29 | 5 |
| 98***37 | Gp Bucket 1100 Wide, 98***37 | 1 |
| 99***37 | Tooth, V29 Series, Syl | 5 |
A2-7-1 Bucket, Gp, 1500 Wide, 1.35 Cubic Metres
| 51***04 | Pin, Locking, V29 | 6 |
| 98***41 | Gp Bucket 1500 Wide, 98***41 | 1 |
| 99***37 | Tooth, V29 Series, Syl | 6 |
A2-6-1 Bucket, Gp, 1200 Wide, 1.12 Cubic Metres
| 51***04 | Pin, Locking, V29 | 5 |
| 98***38 | Gp Bucket 1200 Wide, 98***38 | 1 |
| 99***37 | Tooth, V29 Series, Syl | 5 |
A2-4-1 Bucket, Gp, 900 Wide, 0.77 Cubic Metres
| 51***04 | Pin, Locking, V29 | 4 |
| 98***35 | Gp Bucket 900 Wide J, 98***35 | 1 |
| 99***37 | Tooth, V29 Series, Syl | 4 |
A2-2-1 Bucket, 750mm Wide, 0.380 Cubic Metres. Long Reach Build
| 51***02 | Pin, Locking | 4 |
| 98***19 | Casting, Left Hand Corner | 1 |
| 98***21 | Casting, Right Hand Corner | 1 |
A3-3-3 Kit, Low Flow, Arm 2.4m 980/A3806
| 13***9Z | Bolt; Replaces 60***09 | 2 |
| 13***2Z | Bolt, M12x50 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
A3-3-1 Kit, Low Flow, Boom 980/A3836
| 13***2D | Bolt, M16 X 50mm Long | 8 |
| 13***3D | Bolt, M16 X 55mm | 10 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 18 |
A3-3-2 Kit, Low Flow, Boom 3.09m 980/A4216
| 13***9Z | Bolt; Replaces 60***09 | 4 |
| 13***2Z | Bolt, M12x50 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
B Bodywork, Cab, Loader End
B1-10-20 Kit, Soundproofing, Bonnet
| 33***23 | Panel, Bonnet S/Proofing | 1 |
| 33***45 | Panel, Bonnet Soundproofing | 1 |
| 34***73 | Kit, Bonnet Soundproofing | 2 |
B1-13-1 House Frame, Assembly, Extra Duty/Long Reach
| 13***5D | Screw, Set | 2 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 10 |
| 13***8D | Screw | 12 |
B1-20-1 Tool Box Lid, Assembly
| 13***1Z | Nut, M5-8 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 21***67 | Assembly, Toolbox Lid | 2 |
B1-10-1 Cover, Engine, Black
| 13***1D | Nut, Plain M5 | 4 |
| 13***1D | Nut, M8 High Stress | 4 |
| 14***5D | Washer | 4 |
B1-15-1 Firewall, Assembly
| 13***5D | Bolt, M12 X 20mm | 4 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 4 |
| 14***9D | Washer, M12 | 8 |
B1-14-10 Sound Proofing, Bulkhead, Baffles
| 33***55 | Panel, Foam, Bulkhead To Cowl | 1 |
| 33***65 | Kit, Soundproofing, Bulkhead | 1 |
| 33***66 | Panel, S/Proofing - Air Cleaner | 1 |
B1-6-1 Counterweight 5.5t, Assembly, Long Reach
| 13***2D | Bolt, M12x50 | 1 |
| 14***9D | Washer, M12 | 1 |
| 14***9D | Washer, M12 Spring | 1 |
B1-7-1 Hydraulic Tank, Assembly
| 13***3D | Screw | 4 |
| 13***5D | Bolt | 4 |
| 13***8D | Setscrew | 4 |
B1-1-10 Frame, Revolving, Xd Build, Lr Build
| 33***50 | Plate, Skirt Pressing, Right Hand Side | 1 |
| 33***09 | Plate, Side | 1 |
| 33***58 | Pressing, Front Member, Js220xd | 1 |
B1-21-1 Tank, Fuel
| 13***3D | Screw | 4 |
| 13***6D | Bolt, M16 X 70mm | 6 |
| 14***5D | Washer | 4 |
B1-8-10 Sound Proofing, Doors, Engine Bay
| 33***39 | Foam, Door Closure | 1 |
| 33***83 | Panel, Rear Door Soundproofing Right Hand | 1 |
| 33***84 | Panel, Rear Door Soundproofing Left Hand | 1 |
B1-17-1 Toolbox, Assembly
| 13***5D | Bolt, M12 X 20mm | 2 |
| 14***9D | Washer, M12 | 2 |
| 21***16 | Assembly, Toolbox | 1 |
B1-18-1 Tank Cover, Assembly
| 13***3D | Screw | 2 |
| 13***3D | Screw | 2 |
| 14***7D | Washer, M8 Plain | 2 |
B1-1-1 Frame, Revolving, Standard Build
| 33***50 | Plate, Skirt Pressing, Right Hand Side | 1 |
| 33***03 | Pressing, Right Hand Front | 1 |
| 33***09 | Plate, Side | 1 |
B1-3-1 Covers, Revolving, Undercover Nc, Sc, Lc
| 13***9D | Screw, M12x35mm Long | 31 |
| 13***5D | Bolt | 4 |
| 14***8D | Washer, M10 | 4 |
B1-19-1 Toolbox, Assembly
| 13***5D | Bolt | 4 |
| 13***8D | Screw | 6 |
| 13***1D | Nut, Plain M5 | 4 |
B1-10-10 Cover, Engine, Yellow
| 13***1D | Nut, Plain M5 | 4 |
| 13***1D | Nut, M8 High Stress | 4 |
| 14***5D | Washer | 4 |
B1-14-1 Bulkheads/Baffles, Assembly
| 13***1D | Screw | 2 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 12 |
| 13***8D | Screw | 2 |
B1-16-1 Handrail, Assembly
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 2 |
| 13***9D | Bolt, M12 X 35 | 4 |
| 13***1D | Nut, M10 High Strength | 2 |
B1-9-1 Tread Plates/Grilles, Assembly
| 13***7D | Screw | 4 |
| 13***3D | Screw | 6 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 15 |
B1-4-20 Sound Proofing, Revolving, Frame
| 33***65 | Seal, Centre | 1 |
| 33***67 | Seal, Right Hand Side | 1 |
| 33***68 | Seal, Left Hand Side | 1 |
B1-5-1 Counterweight 5.5t, Assembly
| 13***2D | Bolt, M12x50 | 1 |
| 14***9D | Washer, M12 | 1 |
| 14***9D | Washer, M12 Spring | 1 |
B1-8-1 Doors, Engine Bay, Assembly
| 13***5D | Bolt | 2 |
| 13***8D | Screw | 9 |
| 13***1D | Nut, Plain M5 | 8 |
B1-4-10 Sound Proofing, Counterweight
| 33***75 | Panel, Soundproofing | 1 |
| 33***76 | Panel, Soundproofing, Counterweight | 1 |
| 33***84 | Panel, Soundproofing, Counterweight | 1 |
B1-3-10 Covers, Revolving, Undercover Ncxd, Scxd, Ldxd
| 13***9D | Bolt, Grade 12.9 | 26 |
| 13***0D | Screw | 4 |
| 13***1D | Bolt, M12 X 45 | 4 |
B1-7-10 Hydraulic Tank, Abi
| 33***16 | Assembly, Hydraulic Tank | 2 |
| 33***18 | Tank, Wa Hydraulic | 1 |
| 81***90 | Cap, Blanking 1/2" Bsp, Female | 3 |
B1-12-1 House Frame, Assembly
| 13***5D | Screw, Set | 2 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 12 |
| 13***8D | Screw | 13 |
B1-4-1 Counterweight 4.5t, Assembly
| 13***2D | Bolt, M12x50 | 1 |
| 14***9D | Washer, M12 | 1 |
| 14***9D | Washer, M12 Spring | 1 |
B2-9-1 Floor Mat, Assembly
| 21***00 | Assembly, Floor Mat | 2 |
| 33***53 | Plate, Kick | 1 |
| 33***16 | Mat, Cab Floor | 1 |
B2-19-1 Screen Guards, Assembly, Cab Option B Required
| 13***8D | Screw | 6 |
| 13***1D | Setscrew, M16 X 45 | 2 |
| 13***3D | Nut, M16 | 2 |
B2-21-1 Fire Extinguisher, Assembly
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***3Z | Nut | 2 |
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
B2-11-1 Cab Mirror, Assembly
| 13***1Z | Nut, High Strength, M10 | 2 |
| 13***7D | Capscrew, M10 | 2 |
| 21***87 | Assembly, Cab Mirror | 1 |
B2-20-1 Mesh Guards Front, Assembly, Option B
| 13***8D | Screw | 4 |
| 13***1D | Setscrew, M16 X 45 | 2 |
| 13***3D | Nut, M8 Locking | 4 |
B2-1-0 Cab, Assembly
| 21***64 | Assembly, Cab Base | 1 |
| 21***56 | Assembly, Cab | 1 |
| 21***57 | Assembly, Operator Cab | 1 |
B2-10-1 Lever & Seat Slide, Assembly
| 13***5Z | Screw, M10 X 20 | 4 |
| 13***8Z | Capscrew | 8 |
| 14***1Z | Washer, M16 Plain | 1 |
B2-17-1 Rain Guard, Assembly
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***7Z | Bolt | 4 |
B2-5-1 Mounting Fasteners, Assembly
| 13***14 | Bolt, Hex. Head | 4 |
| 13***16 | Bolt | 2 |
| 13***1Z | Nut, M12 | 2 |
B2-2-1 Cab Door Components, Assembly
| 33***54 | Assembly, Door | 1 |
| 33***58 | Frame, Cab Door | 1 |
| 33***62 | Catch, Assembly, Js Cab | 1 |
B2-15-1 Seat Belt 3 Inch
| 40***00 | Kit-Seat Belt | 1 |
B2-14-1 Seat Belt
| 25***00 | Belt, Seat | 2 |
B2-4-1 Front Wiper, Cab Components
| 24***09 | Grommet | 2 |
| 33***26 | Stop, Cab Roof | 2 |
| 33***29 | Knob | 1 |
B2-1-1 Operator Cab, Assembly
| 13***3Z | Screw, M8 X 16 | 3 |
| 21***56 | Assembly, Cab | 1 |
| 33***28 | Harness, Cab, Radio & Interior Lights | 1 |
B2-7-1 Console Box, Assembly
| 13***3Z | Screw | 4 |
| 13***7Z | Capscrew, Socket Head | 8 |
| 14***6Z | Washer, M6 | 4 |
B2-1-11 Cab Assembly, Cab Option B, To Suit Screen Guard
| 33***53 | Plate, Mounting | 2 |
| 33***17 | Lug | 2 |
| 33***22 | Assembly, Operator Cab | 1 |
B2-6-1 Cab Trimming, Assembly
| 13***02 | Capscrew | 4 |
| 14***83 | Hook, Coat | 1 |
| 21***93 | Assembly, Cab Trimming | 2 |
B2-12-1 Standard Seat, Assembly
| 13***7D | Capscrew | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 33***90 | Bracket, Seatstop | 1 |
B2-3-1 Front Screen, Assembly
| 13***3Z | Screw, M8 X 16 | 2 |
| 33***63 | Windscreen, Assembly | 1 |
| 33***66 | Frame, Window | 1 |
B2-12-20 Seat Air Suspension, Assembly
| 13***7D | Capscrew | 1 |
| 14***7D | Washer, M8 Plain | 1 |
| 21***34 | G.A., Air Susp Heated High, Back | 1 |
B2-18-1 Vandal Guards, Assembly
| 21***37 | Guard, Cab Vandal | 1 |
| 33***55 | Guard, Front Deflector | 1 |
| 33***56 | Guard, Rear | 1 |
B3-19-1 Lower Boom, Tab Boom
| 17***VZ | Nut; Replaces 173r030vn, San 12233 | 4 |
| 21***45 | Assembly, Lower Boom | 2 |
| 60***0Z | Bolt; Replaced By 13***30, San 12455 | 1 |
B3-0-1 Monoboom, None Hbcv
| 21***22 | G.A, Monoboom - Non Hbcv | 1 |
B3-2-10 Rams, Monoboom, H.B.C.V.
| 17***VD | Nut | 8 |
| 21***71 | Assembly, Boom Ram | 2 |
| 21***26 | Assembly, Boom Ram | 1 |
B3-1-1 Monoboom, Components
| 17***VZ | Nut; Replaces 173r030vn, San 12233 | 4 |
| 21***65 | Assembly, Boom | 2 |
| 60***0Z | Bolt; Replaced By 13***30, San 12455 | 1 |
B3-15-1 Monoboom, Components, 260 Long Reach
| 17***VZ | Nut; Replaced By 172r024vz, San 12088 | 2 |
| 17***VZ | Nut; Replaces 173r030vn, San 12233 | 2 |
| 21***59 | Assembly, Boom - Js260lr | 2 |
B3-6-1 Transport Link, Js240/260/260xd, Bucket Link To Dipper
B3-0-60 Monoboom, Long Reach, Boom & Arm H.B.C.V.
| 21***60 | Assembly, Long Reach - 3 Hbcv | 1 |
B3-2-1 Rams, Monoboom And Tab, Non H.B.C.V.
| 17***VZ | Nut | 8 |
| 21***24 | Assembly, Boom Ram Rh | 1 |
| 21***25 | Assembly, Boom Ram Lh | 1 |
B3-10-1 Boom, Greasing Pipes, Monoboom
| 13***8Z | Screw; Replaces 60***8r | 8 |
| 14***7Z | Washer, Spring | 8 |
| 9G***34 | Assembly, Greasing | 2 |
B3-13-1 Dipper (Stick), 3.09m Arm
| 17***VZ | Nut | 2 |
| 21***36 | Assembly, Arm-3.09m Ctrs | 1 |
| 21***20 | Assembly, Bucket Ram | 1 |
B3-14-1 Dipper (Stick), 3.53m Arm
| 13***6D | Bolt, M20 X 160mm | 1 |
| 13***1D | Plain Nut M20 | 1 |
| 21***33 | Assembly, Arm - 3.53m Pivot | 1 |
B3-3-1 Tipping Link, Linkage
| 13***6D | Bolt, M20 X 160mm | 1 |
| 13***7D | Bolt, M20 X 170 Lg | 3 |
| 13***1D | Nut | 2 |
B3-0-20 Monoboom, Boom & Dipper Hbcv
| 21***24 | G.A, Monoboom, Boom & Arm Hbcv | 1 |
B3-20-1 Upper Boom, Tab Boom
| 17***VZ | Nut; Replaces 173r030vn, San 12233 | 2 |
| 21***46 | Assembly, Upper Boom | 2 |
| 60***2Z | Bolt | 1 |
B3-16-1 Dipper (Stick), Long Reach Boom, 8.07m Long
| 13***4Z | Bolt | 4 |
| 14***9Z | Washer | 4 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
B3-0-40 T.A.B., Boom, Boom H.B.C.V.
| 21***28 | Assembly, Tab - Boom Hbcv | 1 |
B3-3-20 Tipping Link, Linkage, Long Reach
| 17***VZ | Nut | 4 |
| 60***4Z | Bolt | 2 |
| BH***34 | Shim, Plate, 1.2mm Thick | 6 |
B3-18-1 Transport Stay, Long Reach Boom
| 9G***73 | Assembly, Transport Stay | 2 |
| KR***23 | Pin | 2 |
| KR***17 | Stay | 1 |
B3-12-1 Dipper (Stick), 2.44m Arm
| 17***VZ | Nut | 2 |
| 21***34 | Assembly, Arm - 2.44m Pivot | 1 |
| 21***20 | Assembly, Bucket Ram | 1 |
B3-0-50 T.A.B., Boom, Boom & Arm H.B.C.V.
| 21***29 | G.A, Tab Boom, Boom & Arm Hbcv | 1 |
B3-3-10 Tipping Link, Linkage, Xd
| 17***VR | Nut, High, Strength; Replaced By 173r020vz, See San11641, Nut | 4 |
| 17***VZ | Nut | 4 |
| 60***6Z | Bolt | 1 |
B3-5-1 Transport Link, Long Reach Boom, Bucket Link To Dipper
| 33***16 | Link, Transport, Js130; Replaces Knp0254 | 1 |
B3-0-10 Monoboom, Boom, H.B.C.V.
| 21***23 | G.A, Monoboom - Boom Hbcv | 1 |
B3-13-10 Dipper (Stick), 3.09m Arm Xd
| 17***VZ | Nut | 2 |
| 21***37 | G.A, Arm - 3.09m Ctrs, Js260xd Auto | 1 |
| 21***20 | Assembly, Bucket Ram | 1 |
B3-17-1 Boom, Greasing Pipes, Monoboom 260 Long Reach
| 13***8Z | Screw; Replaces 60***8r | 8 |
| 13***1Z | Capscrew | 6 |
| 14***7Z | Washer, Spring | 8 |
B3-0-30 T.A.B., Boom, Non H.B.C.V.
| 21***27 | G.A, Tab Boom Non Hbcv, Js260/Js260xd Auto | 1 |
| 21***34 | G.A, Grease Line - Tab Boom | 1 |
B3-11-1 Dipper (Stick), 2.02m Arm
| 17***VZ | Nut | 2 |
| 21***30 | Assembly, Arm-2.02m Pivot | 1 |
| 21***20 | Assembly, Bucket Ram | 1 |
B3-12-10 Dipper (Stick), 2.44m Arm Xd
| 13***6D | Bolt, M20 X 160mm | 1 |
| 13***1D | Plain Nut M20 | 2 |
| 21***35 | G.A, Arm - 2.44m Ctrs, Js260xd Auto | 1 |
B3-2-20 Rams, Tab Boom, H.B.C.V.
| 17***VZ | Nut | 8 |
| 21***72 | Assembly, Boom Ram - Lh | 1 |
| 21***73 | Assembly, Boom Ram - Rh | 1 |
B5-5-1 Decals, Spanish Handbook
| 21***25 | Label, Pack | 1 |
| 21***77 | Assembly, Spanish H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-40-1 Paint
| 42***01 | Thinners, 1 Litre, 2-Pack | 1 |
| 42***03 | Thinners, 5 Litre, 2-Pack | 1 |
| 42***40 | Paint, Gloss, 0.5 Litre, Two Pack Yellow | 0 |
B5-27-1 Insignia Mono 240lc
| 21***26 | Label, Pack, All 200/21***0c | 1 |
| 21***17 | Assembly, Common Decals | 1 |
| 21***95 | Assembly, Insignia Mono 240lc | 1 |
B5-21-1 Decals, Hungarian Handbook
| 21***25 | Label, Pack | 1 |
| 21***64 | Assembly, Hungarian H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-6-1 Decals, Portuguese Handbook
| 21***25 | Label, Pack | 1 |
| 21***78 | Assembly, Port H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-24-1 Insignia Mono 24onc
| 21***26 | Label, Pack, All 200/21***0c | 1 |
| 21***17 | Assembly, Common Decals | 1 |
| 21***93 | Assembly, Insignia Mono 240nc | 1 |
B5-28-1 Insignia Mono 260nc
| 21***26 | Label, Pack, All 200/21***0c | 1 |
| 21***17 | Assembly, Common Decals | 1 |
| 21***96 | Assembly, Insignia Mono 260nc | 1 |
B5-7-1 Decals, Italian Handbook
| 21***25 | Label, Pack | 1 |
| 21***79 | Assembly, Italian H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-1-1 Tool Kit, Assembly
| 21***77 | Assembly, Tool Kit, Grease Gun | 1 |
| 40***17 | Grease, Hp, 400g X 24 | 2 |
| 82***71 | Clip, Grease Gun Retainer | 1 |
B5-19-1 Decals, Croation Handbook
| 21***25 | Label, Pack | 1 |
| 21***91 | G.A, Croatian H/Book / De, Js330 Auto | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-16-1 Decals, Hebrew Handbook
| 21***25 | Label, Pack | 1 |
| 21***88 | Assembly, Hebrew H/Book/Decals | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-8-1 Decals, Dutch Handbook
| 21***25 | Label, Pack | 1 |
| 21***80 | Assembly, Dutch H/Book/Dec, Js330 Auto | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-17-1 Decals, Greek Handbook
| 21***25 | Label, Pack | 1 |
| 21***89 | Assembly, Greek H/Book/Decal, Js330 Auto | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-30-1 Insignia Mono 260sc
| 21***26 | Label, Pack, All 200/21***0c | 1 |
| 21***17 | Assembly, Common Decals | 1 |
| 21***98 | Assembly, Insignia Mono 260sc | 1 |
B5-2-1 Labels
| 33***73 | Label, Isuzu Engine Emission, Chinese | 1 |
| 81***40 | Label, Diagnostic Socket | 1 |
| 81***66 | Decal, Warning, No Step | 2 |
B5-23-1 Common Decals
| 21***17 | Assembly, Common Decals | 1 |
| 81***41 | Decal, Counterweight | 1 |
| 81***61 | Decal, Cab, Under Front Window | 1 |
B5-29-1 Insignia Mono 260lc
| 21***26 | Label, Pack, All 200/21***0c | 1 |
| 21***17 | Assembly, Common Decals | 1 |
| 21***97 | Assembly, Insignia Mono 260lc | 1 |
B5-11-1 Decals, Swedish Handbook
| 21***25 | Label, Pack | 1 |
| 21***83 | Assembly, Swedish H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-25-1 Labels
| 21***26 | Label, Pack, All 200/21***0c | 1 |
| 33***26 | Decal, Fusebox, Js290 | 1 |
| 81***23 | Decal, Jcb Insignia (Black), Boom | 2 |
B5-20-1 Decals, Arabic Handbook
| 21***25 | Label, Pack | 1 |
| 21***92 | Assembly, Arabic H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-9-1 Decals, Danish Handbook
| 21***25 | Label, Pack | 1 |
| 21***81 | Assembly, Danish H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-99-1 Service Items, Intervals
| 32***40 | Element, Filter Bypass, Plexus | 1 |
| 32***59 | Strainer, Assembly | 1 |
| 32***38 | Element, Fuel Filter, Cartridge | 1 |
B5-12-1 Decals, Norwegian Handbook
| 21***25 | Label, Pack | 1 |
| 21***84 | Assembly, Norwegian H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-26-1 Insignia Mono 240sc
| 21***26 | Label, Pack, All 200/21***0c | 1 |
| 21***17 | Assembly, Common Decals | 1 |
| 21***94 | Assembly, Insignia Mono 240sc | 1 |
B5-31-1 Eu Labels 240
| 21***41 | Assembly, Eu Labels 240 | 1 |
| 33***20 | Decal, No Naked Flame, Diesel | 1 |
| 33***96 | Label, Warning Sign Engine Bay | 1 |
B5-4-1 Decals, French Handbook
| 21***25 | Label, Pack | 1 |
| 21***76 | Assembly, French H/Book/Dec, Js330 Auto | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-3-1 Decals, English Handbook
| 21***25 | Label, Pack | 1 |
| 21***75 | Assembly, English H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 2 |
B5-18-1 Decals, Czech Handbook
| 21***25 | Label, Pack | 1 |
| 21***90 | Assembly, Czech H/Book/Decal, Js330 Auto | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-13-1 Decals, German Handbook
| 21***25 | Label, Pack | 1 |
| 21***85 | Assembly, German H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-10-1 Decals, Finnish Handbook
| 21***25 | Label, Pack | 1 |
| 21***82 | Assembly, Finnish H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-15-1 Decals, Usa Handbook
| 21***25 | Label, Pack | 1 |
| 21***87 | Assembly, Usa H/Book/Decal | 1 |
| 81***70 | Decal, Warning 24 Volt | 1 |
B5-14-1 Decals, Russian Handbook
| 21***25 | Label, Pack | 1 |
| 21***86 | Assembly, Russian H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-22-1 Decals, Latvian Handbook
| 21***25 | Label, Pack | 1 |
| 21***65 | Assembly, Latvian H/Book/Dec | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
C Electrics-Machine, Cab & Engine
C1-8-1 Additional Lights, Assembly, Js260
| 12***05 | Bracket | 3 |
| 13***5Z | Bolt, High Tensile | 5 |
| 13***5Z | Screw, M12x20; Replaces 60***5r | 4 |
C1-4-1 Lights, Working, Installation
| 12***05 | Bracket | 2 |
| 13***5D | Screw, Set | 1 |
| 13***9D | Screw | 1 |
C1-5-1 700/43900, Work Light
| 70***03 | Spring | 1 |
| 70***00 | Light, Assembly, 24v | 5 |
| 72***32 | Bulb, H3 24v 70w | 1 |
C1-7-1 Additional Lights, Assembly
| 12***05 | Bracket | 3 |
| 13***5Z | Bolt, High Tensile | 5 |
| 13***5Z | Screw, M12x20; Replaces 60***5r | 4 |
C1-1-1 Main Electrics
| 21***48 | Assembly, Main Electrics | 1 |
| 70***28 | Switch, Overheat Warning | 1 |
| 70***71 | Switch, Power Boost Pressure, 335bar; Replaced By 33***70 + 33***65, See San 23865 | 1 |
C1-6-1 700/50022, Work Light
| 70***03 | Spring | 1 |
| 70***22 | Light, Assembly 24v | 2 |
| 72***32 | Bulb, H3 24v 70w | 1 |
C1-3-10 Battery, Relay Assembly
| 13***1D | Screw, Set M6x12 | 3 |
| 13***3D | Setscrew | 1 |
| 13***1D | Setscrew, M8 X 12mm | 4 |
C1-9-1 Beacon Installation, Assembly, 24v Magnetic
| 70***00 | Beacon, Magnetic 24 Volt, Amber | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 71***00 | Socket, Beacon | 1 |
C1-13-1 Harness Fuses
| 33***57 | Fuse, 65 Amp | 0 |
| 33***58 | Fuse, 25 Amp | 0 |
C1-12-1 Horn
| 13***5D | Screw, Set | 1 |
| 14***7D | Washer, M8 Spring | 1 |
| 71***52 | Horn | 1 |
C1-10-1 Travel Alarm, Assembly
| 21***93 | Assembly, Travel Alarm | 1 |
| 41***00 | Fluid, Locking, Loctite 262 | 0 |
| 71***00 | Alarm, Reverse | 1 |
C1-3-1 Battery Installation, 24 Volt
| 13***1D | Nut, Plain | 8 |
| 14***6D | Washer, M6 Plain | 4 |
| 21***02 | Battery, Installation | 1 |
C2-4-1 Alternator
| 71***23 | Alternator, Assembly | 1 |
C2-3-1 Motor, Starter
| 71***72 | Motor, Starter | 1 |
C2-2-1 Ecu Harnesses
| 02***86 | Tie, L=250 | 1 |
| 02***53 | Tie, Cable | 1 |
| 02***03 | Bracket, Harness Hanger | 1 |
C2-5-1 Mountings & Fittting, Alternator &, Starter Motor
| 02***17 | Nut | 1 |
| 02***22 | Bolt | 1 |
| 02***25 | Bolt | 1 |
C2-1-1 Electrical Equipment
| 02***11 | Thermostat, 'A' | 1 |
| 02***12 | Thermostat, 'B' | 1 |
| 70***00 | Switch, Temperature Sender, M16 | 1 |
C2-1-2 Engine, Control Module
| 13***5D | Setscrew, M10 X 20 | 3 |
| 14***8D | Washer, M10 | 3 |
| 21***54 | Assembly, Module, Engine Control | 1 |
C3-16-11 Air Conditioning, Unit
| 30***97 | Washer, M3 | 1 |
| 30***98 | Grommet | 5 |
| 30***00 | Screw | 59 |
C3-11-1 Radio
| 13***3Z | Nut | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
| 21***79 | Assembly, Radio | 1 |
C3-5-1 Air Temperature, Control, Kit
| 12***99 | Compressor, 24v | 1 |
| 13***5D | Screw, Set | 2 |
| 13***3D | Screw | 2 |
C3-2-1 Heater Common Parts, Assembly
| 13***5Z | Screw, M10 X 20 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 21***64 | Assembly, Heater Common Parts | 2 |
C3-15-1 Cab Electrics
| 13***5D | Screw, Set | 4 |
| 13***5D | Bolt | 1 |
| 13***3D | Bolt, M4 X 16 | 4 |
C3-8-1 Wiper, Lower, Option
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***3Z | Screw | 2 |
C3-4-1 Heater, Components, Fig 1
| 30***98 | Grommet | 4 |
| 30***00 | Screw | 60 |
| 30***06 | Washer, Shoulder 6.2 I/D | 1 |
C3-13-1 Control Module, Engine
| 13***5D | Setscrew, M10 X 20 | 3 |
| 14***8D | Washer, M10 | 3 |
| 21***54 | Assembly, Module, Engine Control | 1 |
C3-6-1 Compressor Mounting, Assembly
| 13***1D | Screw, Set M6x12 | 1 |
| 13***8D | Bolt | 6 |
| 13***3D | Nut, Self Lock M10 | 2 |
C3-4-10 Heater, Components, Fig 2
| 30***05 | Actuator, 12v | 1 |
| 30***15 | Relay, 24v Spst | 2 |
| 30***16 | Pipe, Water In | 1 |
C3-5-10 Condenser, Components
| 30***17 | Drier, Receiver, Js130 T2 | 1 |
| 30***89 | Elbow, Receiver Drier | 1 |
| 30***97 | Condenser | 2 |
C3-16-10 Air Con Unit, Components, Fig 1
| 30***97 | Washer, M3 | 1 |
| 30***98 | Grommet | 5 |
| 30***00 | Screw | 59 |
C3-16-20 Air Conditioning, Components, Fig 2
| 30***05 | Actuator, 12v | 1 |
| 30***15 | Relay, 24v Spst | 2 |
| 30***16 | Pipe, Water In | 1 |
C3-1-1 Heater, Assembly
| 13***7D | Screw | 4 |
| 21***64 | Assembly, Heater Common Parts | 1 |
| 21***66 | Assembly, Heater Hose Kit | 1 |
C3-14-1 Ems & Switch Panel
| 70***69 | Switch, Panel, Fascia | 1 |
| 72***73 | Unit, Ems Monitor, Programmed; Replaced By 70***07, See San 22500c | 1 |
C3-12-1 Ecu Controller
| 13***7D | Capscrew, M10 | 3 |
| 14***8D | Washer, M10 | 3 |
| 21***10 | Assembly, Engine Control Unit | 1 |
C3-9-1 Washer Bottle
| 21***71 | Assembly, Washer Bottle | 1 |
| 60***3Z | Screw, Countersunk | 2 |
| JH***60 | Tank, Screen Wash, With Pump | 1 |
C3-16-1 Air Con
| 21***34 | G.A, Heater & Air Con, Js240 | 1 |
C3-5-20 Air Conditioning, Hose Installation
| 30***49 | Hose, Compressor To, Condenser | 1 |
| 30***50 | Hose, Receiver Drier To, Txv | 1 |
| 30***51 | Hose, Txv To Compressor | 1 |
C3-3-1 Heater Hose Kit, Assembly
| 21***66 | Assembly, Heater Hose Kit | 2 |
| 22***05 | Clip, Jubilee | 6 |
| 24***87 | Plug, Coolant Drain | 1 |
D Controls-Machine, Engine
D1-1-1 Controls,Cab Floor, Cab Mountings
| 13***3D | Screw | 4 |
| 13***5D | Screw, Set | 4 |
| 13***3D | Screw | 4 |
D1-2-1 Aux Pedal Left-Side, Assembly
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 21***92 | Assembly, Auxiliary Pedal Lh | 1 |
E Hydraulics & Air
E1-23-2 Circuit, Revolving, Frame Hammer/Auxilliary
| 13***5D | Bolt | 2 |
| 13***5D | Bolt, M12 X 20mm | 3 |
| 13***8D | Screw | 2 |
E1-31-1 Circuit, Pipeclamps, Low Flow, Hammer
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 3 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***2D | Bolt, M16 X 50mm Long | 8 |
E1-30-1 Circuit, Pipeclamps, Low Flow
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 2 |
| 13***2D | Bolt, M16 X 50mm Long | 8 |
| 13***3D | Bolt, M16 X 55mm | 10 |
E1-14-30 Circuit, Track Motor, Lc, Lcxd
| 41***52 | Loctite, Threadlock, 200ml | 0 |
| 9G***33 | Assembly, Traction Motor Line | 1 |
| KT***78 | Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Lh Travel. Port Pb1 To Travel Pedal Port 1. Lh Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Rh Travel. Port Pb6 To Travel Pedal Port 4. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 4 To Main Control Valve Port Pb6. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port C8 To Main Control Valve Port Pc3. Swing Priority, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 2 To Main Control Valve Port Pb1. Left Hand Track Forward. | 2 |
E1-52-1 340/00688, Hose Kit
| 34***88 | Kit, Hose, Tab | 1 |
| 62***61 | Hose | 1 |
| KN***91 | Hose; Replaced By Jnj0096, See San05940, Port C7 To Solenoid Valve Port A. Swing Solenoid Fail., Hose; Replaced By Jnj0096, See San05940, Port A To Shuttle Valve Port C7. Swing Solenoid Fail, Hose; Replaced By Jnj0096, See San05940 | 1 |
E1-12-2 Circuit, Return & Oil Cooler
| 13***9D | Bolt, Grade 12.9 | 4 |
| 13***9D | Bolt, M12 X 35 | 28 |
| 13***1Z | Nut, High Strength, M10 | 4 |
E1-50-1 Circuit, Hammer, Tab
| 13***3D | Screw | 4 |
| 13***7D | Screw | 6 |
| 13***8D | Screw | 1 |
E1-0-30 T.A.B., Boom, Non H.B.C.V.
| 21***27 | G.A, Tab Boom Non Hbcv, Js260/Js260xd Auto | 1 |
| 21***34 | G.A, Grease Line - Tab Boom | 1 |
E1-40-2 Kit, Mainframe, & Hammer/Aux
| 33***30 | Kit, Hose M/F & H/A | 1 |
| 33***61 | Hose, 1" Bsp, 875mm St-St | 1 |
| 33***06 | Hose, 3/4" Bsp-1 Sae(61)90- | 1 |
E1-55-1 Circuit, Pipeclamps, Tab, Hammer/Auxilliary
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 3 |
| 13***0D | Bolt | 4 |
| 13***4D | Bolt, M12 X 60 | 1 |
E1-41-1 Circuit, Dipper Ram
| 13***6Z | Bolt | 5 |
| 13***9Z | Capscrew, M10 X 35mm | 4 |
| 13***1Z | Capscrew | 4 |
E1-48-2 Kit, Hose, 332/J9368
| 33***93 | Hose, 1" St-St 875mm Long | 1 |
| 34***94 | Kit, Hose, Tab Hammer | 1 |
| 61***38 | Hose | 1 |
E1-14-10 Circuit, Track Motor, Nc, Ncxd
| 41***52 | Loctite, Threadlock, 200ml | 0 |
| JG***29 | Assembly, Motor Line | 1 |
| KT***78 | Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Lh Travel. Port Pb1 To Travel Pedal Port 1. Lh Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Rh Travel. Port Pb6 To Travel Pedal Port 4. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 4 To Main Control Valve Port Pb6. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port C8 To Main Control Valve Port Pc3. Swing Priority, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 2 To Main Control Valve Port Pb1. Left Hand Track Forward. | 2 |
E1-61-1 Circuit, Pipeclamps,Low Flow, Tab
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 2 |
| 13***0D | Bolt | 4 |
| 13***2D | Bolt, M16 X 50mm Long | 6 |
E1-27-1 Circuit, Control Hammer / Aux, Merged Pumps
| 13***3D | Screw | 2 |
| 13***7D | Screw | 2 |
| 13***9D | Capscrew, M6 X 35 | 2 |
E1-57-1 340/00686, Hose Kit
| 33***93 | Hose, 1" St-St 875mm Long | 1 |
| 33***61 | Hose, 1" Bsp, 875mm St-St | 1 |
| 34***86 | Kit, Hose, Tab, M/Frame, Hammer/Auxiliary | 1 |
E1-0-20 Monoboom, Boom, & Arm H.B.C.V.
| 21***24 | G.A, Monoboom, Boom & Arm Hbcv | 1 |
E1-69-1 Circuit, Bucket Ram, Tab Boom
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt | 3 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E1-22-1 Circuit, Pipe Clamps, Hammer
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 3 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***2D | Bolt, M16 X 50mm Long | 8 |
E1-0-1 Monoboom, None Hbcv
| 21***22 | G.A, Monoboom - Non Hbcv | 1 |
E1-2-60 Circuit, Pilot Line, Main Control Valve
| 25***91 | Valve, Main Control, Js240, 260 T2 | 1 |
| 62***71 | Hose, 1_4 Str-Str; Port 3 To Main Control Valve Port Pa6. Right Hand Track Reverse., Hose, 1_4 Str-Str; Port 1 To Main Control Valve Port Pa1. Left Hand Track Reverse., Hose, 1_4 Str-Str, Hose, 1_4 Str-Str; Port 1 To Main Control Valve Port Pb1. Left Hand Track Reverse. | 1 |
| JL***14 | Hose, Yellow/Red | 1 |
E1-9-1 332/J0564, Hose Kit, Boom Priority
| 33***64 | Kit, Hose, Boom Priority | 2 |
| 62***74 | Hose; Port C To Main Control Valve Port Pb5. Arm (1) In., Hose | 1 |
| 62***05 | Hose, 3/8x***00 Long St-90 | 1 |
E1-46-2 Circuit, Hammer & Low Flow, Combined,Mono
| 13***2D | Bolt, M16 X 50mm Long | 8 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***8D | Bolt, M16 X 80mm | 4 |
E1-66-1 Circuit, Arm, Ram, Long Reach Boom
| 13***0D | Bolt, M12x40, Grade 10.9 | 2 |
| 13***3D | Bolt | 1 |
| 13***1Z | Nut, M12 | 2 |
E1-68-1 Circuit, Arm, Ram Tab Boom
| 13***4Z | Bolt | 1 |
| 13***6Z | Bolt | 1 |
| 13***6Z | Bolt | 5 |
E1-6-1 332/J0572, Hose Kit
| 33***72 | Kit, Hose, 8 Station | 2 |
| JL***34 | Hose | 1 |
| JL***52 | Hose, 180/90, 600mm | 1 |
E1-44-1 340/00638, Hose Kit
| 33***09 | Kit, Hose Control,H/A | 1 |
| 34***38 | Kit, Hose Control | 2 |
| JL***20 | Hose, 3300mm | 1 |
E1-7-1 332/J0539, Hose Kit, Tank Manifold
| 33***39 | Kit, Hose, Tank Manifold | 2 |
| JL***33 | Hose | 1 |
| JL***93 | Hose | 1 |
E1-20-1 Circuit, Hammer Control
| 13***3D | Screw | 2 |
| 13***7D | Screw | 2 |
| 14***8D | Washer, M10 | 2 |
E1-46-1 Circuit, Pipeclamps, Low Flow, Hammer / Aux / Merged
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 3 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***2D | Bolt, M16 X 50mm Long | 8 |
E1-25-1 Circuit, Pipe Clamps, Hammer / Aux. Merged
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 3 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***2D | Bolt, M16 X 50mm Long | 8 |
E1-67-1 Circuit, Bucket Ram, Long Reach Boom
| 13***4Z | Bolt | 4 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
| 21***22 | Assembly, Bucket Line | 2 |
E1-2-50 Circuit, Valve, Shuttle Control 332/J0614
| 25***38 | Valve, Shuttle | 1 |
| 33***69 | Switch, Low Pressure, 5bar 1/4" Bsp; Replases 70***73 | 1 |
| 33***71 | Switch, 20 Bar, Travel Pressure; Replaces 70***75, 70***72 | 2 |
E1-48-1 340/00694, Hose Kit
| 33***93 | Hose, 1" St-St 875mm Long | 1 |
| 34***94 | Kit, Hose, Tab Hammer | 1 |
| 61***38 | Hose | 1 |
E1-5-1 Circuit, Pilot Pressure/Ret
| 13***9D | Bolt | 2 |
| 13***5D | Screw, Set | 4 |
| 13***8D | Screw | 3 |
E1-42-1 340/00634, Hose Kit
| 33***93 | Hose, 1" St-St 875mm Long | 1 |
| 33***94 | Hose, 3/4"Bsp To 1"Sae, 700mm Long St-90 | 1 |
| 34***34 | Kit, Hose | 2 |
E1-8-1 332/J0710, Hose Kit
| 33***10 | Kit, Hose | 2 |
| JL***09 | Hose, Hose; Port C6 To Shuttle Valve Port C6. Swing Shut Off | 1 |
| JN***29 | Hose, 1/4" Bsp St-90 1200mm, Hose, 1/4" Bsp St-90 1200mm; Port C10 To Throttle Solenoid Valve Port P. Throttle Actuator Feed | 1 |
E1-2-10 Circuit, Valve, Right Hand Controler 340/00427
| 16***03 | Adapter | 5 |
| 21***20 | Assembly, Pilot Control Line | 1 |
| 24***05 | O Ring | 2 |
E1-64-1 Long Reach - Hbcv, Assembly
| 21***59 | Assembly, Boom - Js260lr | 1 |
| 21***60 | Assembly, Long Reach - 3 Hbcv | 1 |
| 21***22 | Assembly, Bucket Line | 1 |
E1-34-1 Circuit, Auxiliary, 3.09 Arm Full Flow
| 13***7D | Bolt, M16 X 75 | 2 |
| 13***9D | Bolt, M16 X 90mm | 2 |
| 33***22 | Pipe | 1 |
E1-29-1 Circuit, Monoboom, Low Flow
| 33***88 | Assembly, Line L/F | 1 |
| 33***65 | Pipe, Upper Boom Low Flow | 2 |
| 41***00 | Fluid, Locking | 0 |
E1-25-2 Circuit, Hammer, Pipe Clamps
| 13***2D | Bolt, M16 X 50mm Long | 8 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***8D | Bolt, M16 X 80mm | 4 |
E1-23-1 Circuit, Revolving, Frame Hammer Auxilliary
| 13***5D | Screw, Set | 4 |
| 13***8D | Screw | 2 |
| 13***0D | Bolt, M14 X 40 | 2 |
E1-70-1 Circuit, Position, Ram Tab Boom
| 13***8Z | Capscrew | 8 |
| 17***VZ | Nut | 4 |
| 21***51 | Assembly, Tab Cyl Line | 2 |
E1-57-2 Kit, Hose, 332/J9835
| 33***61 | Hose, 1" Bsp, 875mm St-St | 1 |
| 33***67 | Hose, 1/2 St-St 380l | 1 |
| 61***38 | Hose | 1 |
E1-17-1 Circuit, Swing, Line
| 13***8D | Capscrew, M10x30 | 16 |
| 21***92 | G.A, Swing Motor | 2 |
| 21***98 | Assembly, Swing Line | 1 |
E1-28-1 Circuit, Revolving, Frame, Low Flow
| 13***8D | Screw | 2 |
| 13***3D | Nut, Lock M5 | 4 |
| 13***9D | Capscrew | 4 |
E1-10-10 Circuit, Boom Rams, H.B.C.V. Long Reach Boom
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-60-1 Circuit, Low Flow, Tab
| JB***41 | Hose | 2 |
| JG***82 | Assembly, Low Flow Pipework | 1 |
| JB***62 | Pipe, Low Flow, Left Hand, Tab Lower Boom | 1 |
E1-51-1 340/00683, Hose Kit, Hammer,Tab
| 34***83 | Kit, Hose | 1 |
| KS***05 | Hose, Nylon; Replaced By Jsj0033, See San05940, Port C8 To Main Control Valve Port Pc3. Swing Priority, Hose, Nylon; Replaced By Jsj0033, See San05940, Hose, Nylon; Replaced By Jsj0033, See San05940, Port Pc3 To Shuttle Valve Port C8. Swing Priority. | 1 |
| KT***07 | Hose, Nylon | 1 |
E1-56-1 Circuit, Mainframe,Hammer/Aux
| 13***5D | Screw, Set | 4 |
| 13***5D | Bolt | 6 |
| 13***5D | Bolt, M12 X 20mm | 2 |
E1-0-50 T.A.B., Boom, Boom & Arm H.B.C.V.
| 21***29 | G.A, Tab Boom, Boom & Arm Hbcv | 1 |
E1-65-1 Circuit, Arm, Ram Long Reach Hbcv
| 13***8Z | Screw, M10x30; Replaces 60***8r | 2 |
| 13***6Z | Bolt | 10 |
| 13***3Z | Nut | 2 |
E1-18-1 Circuit, Dual Controls
| 13***3Z | Screw | 2 |
| 13***7Z | Capscrew | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-2-1 Circuit, Pilot Control Line
| 13***1D | Screw | 4 |
| 13***5D | Bolt | 4 |
| 13***7D | Screw | 2 |
E1-59-1 340/00682, Hose Kit
| 34***82 | Kit, Hose | 1 |
| 62***06 | Hose, 1/4 Bsp Xt-90, 3400mm | 1 |
| KR***79 | Hose, 1/4" Bsp St-90, 2000mm; Port C12 To Main Control Valve Port Pp. Pilot Feed, Hose, 1/4" Bsp St-90, 2000mm, Hose, 1/4" Bsp St-90, 2000mm; Port C7 To Main Valve Port Ph. 2 Stage Relief. | 1 |
E1-49-1 Circuit, Pipeclamps, Tab, Combined Hammer Auxiliary
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 3 |
| 13***0D | Bolt | 4 |
| 13***4D | Bolt, M12 X 60 | 4 |
E1-13-1 Circuit, Drain, Line
| 13***3D | Screw | 2 |
| 13***5D | Bolt | 4 |
| 13***8D | Screw | 2 |
E1-1-1 Circuit, Neutral Pressure
| 13***5D | Bolt, M10 X 150mm | 2 |
| 13***0D | Capscrew, M10 X 40 | 16 |
| 13***1D | Capscrew | 16 |
E1-0-60 Monoboom, Long Reach Boom, Boom & Arm H.B.C.V.
| 21***60 | Assembly, Long Reach - 3 Hbcv | 1 |
E1-45-1 332/J2397, Hose Kit
| 33***97 | Kit, Hose | 2 |
| JL***03 | Hose | 1 |
| JB***41 | Hose | 1 |
E1-40-1 Circuit, Bucket Ram
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt | 1 |
| 82***94 | Washer, Schnorr Heavy Duty M12 | 4 |
E1-0-40 T.A.B., Boom, Boom H.B.C.V.
| 21***28 | Assembly, Tab - Boom Hbcv | 1 |
E1-10-1 Circuit, Boom Rams, H.B.C.V.
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-58-1 Circuit, Tab, Hammer/Aux, Control
| 13***3D | Screw | 4 |
| 13***7D | Screw | 6 |
| 13***8D | Screw | 1 |
E1-31-2 Circuit, Low Flow And Hammer, Pipeclamps
| 13***2D | Bolt, M16 X 50mm Long | 8 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***8D | Bolt, M16 X 80mm | 4 |
E1-56-3 Circuit, Mainframe, Hammer/Aux
| 13***5D | Bolt | 10 |
| 13***5D | Bolt, M12 X 20mm | 2 |
| 13***8D | Screw | 1 |
E1-2-30 Circuit, Valve, Travel Pedal Contrls 340/00383
| 34***83 | Kit, Hose Travel Pedals | 1 |
| 62***71 | Hose, 1_4 Str-Str; Port 3 To Main Control Valve Port Pa6. Right Hand Track Reverse., Hose, 1_4 Str-Str; Port 1 To Main Control Valve Port Pa1. Left Hand Track Reverse., Hose, 1_4 Str-Str, Hose, 1_4 Str-Str; Port 1 To Main Control Valve Port Pb1. Left Hand Track Reverse. | 1 |
| CN***84 | Adapter | 1 |
E1-0-70 Circuit, Hydraulics, Revolving Frame
| 21***91 | G.A, Hydraulic System Revolving Frame | 1 |
E1-24-1 Circuit, Hammer, Auxiliary, Control
| 13***3Z | Screw; Replaces 60***03 | 2 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 13***09 | Capscrew, M6 X 35 | 2 |
E1-47-2 Circuit, Tab Boom, Mainframe Hammer
| 13***5D | Screw, Set | 4 |
| 13***5D | Bolt | 6 |
| 13***5D | Bolt, M12 X 20mm | 2 |
E1-14-20 Circuit, Track Motor, Sc, Scxd
| 41***52 | Loctite, Threadlock, 200ml | 0 |
| JG***47 | Assembly, Traction Motor Line | 1 |
| KT***78 | Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Lh Travel. Port Pb1 To Travel Pedal Port 1. Lh Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Rh Travel. Port Pb6 To Travel Pedal Port 4. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 4 To Main Control Valve Port Pb6. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port C8 To Main Control Valve Port Pc3. Swing Priority, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 2 To Main Control Valve Port Pb1. Left Hand Track Forward. | 2 |
E1-2-20 Circuit, Valve, Left Hand Control 340/00322
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 4 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
| 24***05 | O Ring | 2 |
E1-26-1 Circuit, Revolving, Frame, Merged Pumps
| 13***8D | Screw | 2 |
| 13***0D | Bolt | 2 |
| 14***9D | Washer, M12 | 4 |
E1-32-1 Circuit, Auxiliary, 2.02 Arm Full Flow
| 13***9Z | Bolt; Replaces 60***19 | 4 |
| 81***93 | Cap, Blanking 1"Bsp, Steel | 101 |
| 81***10 | Plug | 1 |
E1-62-1 Circuit, Pipeclamps,Low Flow, Tab, Hammer
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 3 |
| 13***0D | Bolt | 4 |
| 13***4D | Bolt, M12 X 60 | 1 |
E1-39-1 Circuit, Dipper Ram, Hbcv
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***6Z | Bolt | 5 |
| 13***9Z | Capscrew, M10 X 35mm | 4 |
E1-56-2 Circuit, Mainframe, Hammer/Aux
| 13***5D | Bolt | 10 |
| 13***5D | Bolt, M12 X 20mm | 2 |
| 13***8D | Screw | 1 |
E1-33-1 Circuit, Auxiliary, 2.44 Arm Full Flow
| 13***7D | Bolt, M16 X 75 | 3 |
| 13***9D | Bolt, M16 X 90mm | 3 |
| 33***16 | Pipe | 1 |
E1-21-1 Circuit, Hammer, Monoboom
| 33***51 | Pipe, Hammer Feed | 1 |
| 33***61 | Pipe, Hammer Return | 1 |
| 33***91 | Assembly, Line H/A/M | 1 |
E1-63-1 Circuit, Pipeclamps,Low Flow, Tab, Hammer/Aux
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 3 |
| 13***0D | Bolt | 4 |
| 13***4D | Bolt, M12 X 60 | 1 |
E1-47-1 Circuit, Tab, Mainframe, Hammer
| 13***5D | Screw, Set | 4 |
| 13***5D | Bolt | 6 |
| 13***5D | Bolt, M12 X 20mm | 2 |
E1-37-1 Circuit, Auxiliary, 3.09 Arm Low Flow
| 13***9Z | Bolt; Replaces 60***09 | 4 |
| 13***2Z | Bolt, M12x50 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
E1-36-1 Circuit, Auxiliary, 2.4 Arm Low Flow
| 13***9Z | Bolt; Replaces 60***09 | 4 |
| 13***2Z | Bolt, M12x50 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
E1-2-40 Circuit, Valve, Cushion Control 340/00739
| 25***41 | Valve, Cushion; Replaces Krj3889 | 1 |
| 34***39 | Kit, Hose Cushion Valve | 1 |
| 62***09 | Hose, 3/8x450 Long St-90 | 2 |
E1-15-1 Circuit, Boom, Line
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 2 |
| 13***5D | Bolt | 2 |
| 13***1Z | Nut, M12 | 1 |
E1-14-1 Circuit, Track, Line Revolving Frame
| 13***3D | Bolt | 2 |
| 13***9D | Capscrew, M10x35 | 16 |
| 14***9D | Washer, M12 | 2 |
E1-3-1 Circuit, Suction Hose, Line
| 13***08 | Capscrew, M12 X 30 | 4 |
| 21***30 | Assembly, Suction Line | 3 |
| 33***82 | Clamp, Hose 83-105mm | 4 |
E1-19-1 Circuit, Revolving, Frame, Hammer Line
| 13***5D | Screw, Set | 4 |
| 13***8D | Screw | 2 |
| 13***0D | Bolt, M14 X 40 | 2 |
E1-53-1 340/00695, Hose Kit
| 34***95 | Kit, Hose | 1 |
| 62***06 | Hose, 1/4 Bsp Xt-90, 3400mm | 1 |
| KS***05 | Hose, Nylon; Replaced By Jsj0033, See San05940, Port C8 To Main Control Valve Port Pc3. Swing Priority, Hose, Nylon; Replaced By Jsj0033, See San05940, Hose, Nylon; Replaced By Jsj0033, See San05940, Port Pc3 To Shuttle Valve Port C8. Swing Priority. | 1 |
E1-19-2 Circuit, Revolving, Frame Hammer Line
| 13***5D | Bolt | 2 |
| 13***8D | Screw | 2 |
| 13***8D | Capscrew, M10x30 | 4 |
E1-74-1 Circuit, Tab Control
| 13***9Z | Bolt; Replaces 60***09 | 4 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 2 |
| 13***3Z | Nut | 2 |
E1-0-10 Monoboom, Boom, H.B.C.V.
| 21***23 | G.A, Monoboom - Boom Hbcv | 1 |
E1-54-1 Circuit, Tab, Hammer/Aux
| 33***98 | Pipe, Lower Feed | 1 |
| 33***09 | Pipe, Return, Lower Boom | 1 |
| 33***13 | Pipe, Feed, Upper Boom | 1 |
E1-43-1 340/00635, Hose Kit
| 33***93 | Hose, 1" St-St 875mm Long | 1 |
| 33***94 | Hose, 3/4"Bsp To 1"Sae, 700mm Long St-90 | 1 |
| 33***01 | Hose | 1 |
E1-12-1 Circuit, Return & Oil Cooler
| 13***9D | Bolt, Grade 12.9 | 4 |
| 13***9D | Bolt, M12 X 35 | 32 |
| 13***1Z | Nut, High Strength, M10 | 4 |
E1-14-2 Circuit, Track Mainframe, Traction Line
| 13***8D | Bolt | 2 |
| 13***9D | Capscrew, M10x35 | 16 |
| 24***04 | O Ring | 1 |
E1-73-1 Circuit, Arm, Ram H.B.C.V. Tab Boom
| 13***4Z | Bolt | 1 |
| 13***6Z | Bolt | 1 |
| 13***6Z | Bolt | 5 |
E1-35-1 Circuit, Auxiliary, 3.53m Arm Full Flow
| 13***7D | Bolt, M16 X 75 | 2 |
| 13***9D | Bolt, M16 X 90mm | 2 |
| 33***22 | Pipe | 1 |
E1-4-1 Circuit, Filter, Plexus
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 21***28 | Assembly, Plexius Filter | 2 |
| 41***00 | Fluid, Locking | 0 |
E1-16-1 Circuit, Arm, & Bucket Line
| 13***9D | Capscrew, M10x35 | 20 |
| 21***92 | Assembly, Bucket & Arm Line | 2 |
| 24***10 | O Ring | 5 |
E1-71-1 Grease Line Tab, Assembly
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 21***34 | G.A, Grease Line - Tab Boom | 1 |
E2-4-10 Valve, Proportional, Main Pump Components
| 13***14 | Capscrew | 3 |
| 20***31 | Valve, Proportional, Reducing | 1 |
| 20***53 | Kit-Seal, Hydraulic Pump | 1 |
E2-6-1 Motor, Track
| 20***20 | Hydraulic Motor, Track Motor/Gearbox | 1 |
| 20***74 | Shaft, Motor Drive | 1 |
| 20***03 | Motor Seal Ring, Track Motor/Gearbox | 1 |
E2-7-1 Motor, Swing
| 20***66 | Motor, Swing | 1 |
| 20***58 | Plug | 1 |
| 20***90 | Ring, Snap | 1 |
E2-5-1 20/925164, Pump Assembly
| 20***64 | Pump, Assembly, Servo; Replaces Lpp0171=1 And Lmp0230=4. | 1 |
| 20***73 | Ring, Snap | 1 |
| 20***79 | Nut | 1 |
E2-3-1 Pump Coupling
| JR***13 | Coupling, Pump Drive; Replaces Krj3450 | 1 |
| KR***57 | Pin, Special | 4 |
E2-4-1 Pump, Main, Components
| 13***10 | Capscrew | 8 |
| 20***31 | Valve, Proportional, Reducing | 1 |
| 20***85 | Screw, Skt Head Shouldered, Cap | 4 |
E2-1-1 Pump, Piston, Main Hydraulic, Drive Group
| 13***3D | Capscrew | 4 |
| 20***40 | Mounting, Flange | 1 |
| 21***52 | Pump, Assembly | 1 |
E2-2-1 Pump And Coupling
| 13***8D | Setscrew | 12 |
| 21***52 | Pump, Assembly | 1 |
| 33***24 | Pump, Assembly | 1 |
E3-14-1 Rotary Coupling
| 13***8D | Screw | 11 |
| 14***11 | Seal, Bonded | 6 |
| 21***13 | G.A., Centre Joint | 1 |
E3-3-1 Valve Components, Control, Fig 2
| 13***05 | Screw, Cap | 2 |
| 25***30 | Valve, Poppet | 6 |
| 25***31 | Spring | 7 |
E3-1-1 Valve Assembly, Main, Control
| 13***1D | Setscrew, M16 X 45 | 4 |
| 14***1D | Washer, M16 | 4 |
| 21***34 | Assembly, Control Valve | 2 |
E3-19-1 Filter, Assembly, Drain Line
| KN***88 | Element, Oil, Filter | 1 |
| KN***87 | Filter, Assembly, Hydraulic | 2 |
E3-13-1 Valve Components, Cushion
| 25***41 | Valve, Cushion; Replaces Krj3889 | 1 |
| 34***55 | Kit, Repair | 1 |
E3-8-2 Valve Components, Solenoid
| 33***17 | Coil | 8 |
| 33***66 | Valve, Cartridge | 8 |
| 33***67 | Valve | 1 |
E3-16-1 Filter, Auxiliary Circuit, Hydraulic
| 32***41 | Filter, Return Line | 4 |
| 69***51 | Element, Filter | 1 |
| 69***41 | Kit-Seal, Filter | 1 |
E3-10-1 Valve Components, Solenoid, Merge
| 25***13 | Valve, Shuttle | 6 |
| 25***30 | Valve, Shuttle Assembly | 1 |
E3-24-1 Valve, Merge Flow
| 25***32 | Valve, Merged Flow | 1 |
| 33***92 | Valve, Cartridge, C/W Seals | 1 |
| 33***94 | Kit-Seal, Cartridge Valve | 1 |
E3-14-10 Rotary Coupling, Components
| 13***05 | Capscrew, M8 X 20 | 1 |
| 33***39 | Cover | 1 |
| 33***40 | Cover | 1 |
E3-18-1 Filter, Assembly, Servo
| 32***14 | Filter, Assembly, Servo, Element Only = Kbj1691a; Replaces Khj0577 & Kbj1580, See San 20613 | 1 |
| KH***32 | O Ring | 1 |
| KB***91 | Element, Servo, Filter | 1 |
E3-20-1 Valve Components, Solenoid, Dual Controls
| 25***37 | Cartridge, Solenoid Valve | 2 |
| 25***66 | Valve, Dual Controls | 1 |
| 25***63 | Coil, 24v | 1 |
E3-7-1 Valve Components, Solenoid, Hammer Merge
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 25***09 | Valve, Solenoid | 7 |
E3-8-1 Valve Components, Solenoid
| 25***13 | Valve, Shuttle | 1 |
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 8 |
E3-21-1 Valve Components, Hammer, Auxiliary
| 25***94 | Kit, Seal | 1 |
| 25***31 | Valve, Hammer Auxiliary | 2 |
| 25***66 | Valve, Cartridge | 1 |
E3-6-1 Valve Components, Hand Control
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 5 |
| 25***80 | Plate | 1 |
| 25***91 | Valve, Hand Controller, Left Hand | 2 |
E3-4-1 Valve Components, Control, Fig 3
| 25***53 | Seal, O Ring | 2 |
| 25***90 | Plug, Assembly | 11 |
| 25***61 | O Ring, Seal | 20 |
E3-12-1 Valve Components, Priority
| 25***35 | Valve, Priority | 1 |
| 25***36 | Valve, Priority | 1 |
| 71***93 | Coil, 24volt, Deutsch | 1 |
E3-2-1 Valve Components, Control, Fig 1
| 25***30 | Valve, Poppet | 6 |
| 25***31 | Spring | 7 |
| 25***32 | Spacer, Valve | 2 |
E3-15-1 Lubricants & Filters
| 32***40 | Element, Filter Bypass, Plexus | 1 |
| 32***38 | Element, Fuel Filter, Cartridge | 1 |
| 32***69 | Element, Fuel Sediment Filter, Cartridge | 1 |
E3-15-10 Oils, Biodegradable, Hydraulic
| 40***23 | Fluid, Hydraulic, 25 Litres, Biodegradable, Fluid, Hydraulic, 25 Litres, Biodegradable; See Note 1. Use Up To Maximum Of 40 Degrees Centigrade Ambient Temperature. | 1 |
| 40***24 | Fluid, Hydraulic 205 Litres, Biodegradable | 1 |
E3-11-1 Valve Components, Solenoid, Opened/Closed Weed Cutter, Grab
| 25***01 | Coil, Solenoid Valve | 2 |
| 25***69 | Plate, Sub, Assembly | 1 |
| 35***01 | Kit-Seal, Solenoid Valve | 1 |
E3-17-1 Filter, Components, Plexus
| 32***20 | Case, Filter | 1 |
| 32***21 | Bracket, Mounting | 2 |
| 32***23 | Base, Filter | 1 |
E4-19-10 Boom, Ram, Components Tab With Hbcv
| 33***44 | Piston, Boom Ram, 13***mm; Replaces Lpu0100 | 1 |
| 33***66 | Cushion, Ring; Replaces Lmu0341 | 1 |
| 33***37 | Wiper, Pin Bushing; Replaces Lau0047 | 4 |
E4-13-1 Bucket Ram, Assembly
| 13***0D | Bolt | 2 |
| 13***2D | Bolt, M12x50 | 1 |
| 13***1D | Nut, M10 High Strength | 2 |
E4-11-1 Pipework And Clamp, Dipper Ram
| 13***0D | Bolt, M12x40, Grade 10.9 | 2 |
| 13***3D | Bolt | 1 |
| 13***1Z | Nut, M12 | 2 |
E4-3-1 Hydraulic Oil Hp68
| 40***00 | Fluid, Hydraulic Oil Hp68 | 320 |
| 40***01 | Fluid, Hydraulic Iso68, 200 Litre | 1 |
| 81***51 | Hydraulic Oil Label (Hp68) | 1 |
E4-19-1 Boom Ram Left-Side, Assembly, Tab With Hbcv
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-22-1 Boom Ram Left-Side, Assembly, Non H.B.C.V. Monoboom
| 13***0D | Bolt | 2 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-23-1 Boom Ram Right-Side, Assembly, Non H.B.C.V. Monoboom
| 13***0D | Bolt | 2 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-21-1 Arm Cyl Assy - Hbcv, Assembly, Tab With Hbcv
| 13***0Z | Bolt | 2 |
| 13***3Z | Bolt; Replaces 60***3r,60***13 | 1 |
| 13***1Z | Nut, M12 | 2 |
E4-24-10 Ram Bucket, Components, Long Reach, 8.07m Arm
| 33***77 | Ram, Bucket, 95mm Cyl X 70mm Rod | 1 |
| 33***71 | Ring, Cushion | 1 |
| 69***00 | Bush | 1 |
E4-20-1 Boom Ram Right-Side, Assembly, Tab With Hbcv
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-12-1 Dipper, Ram, Components
| 13***18 | Capscrew | 16 |
| 32***12 | Plug | 1 |
| 33***37 | Wiper, Pin Bushing; Replaces Lau0047 | 4 |
E4-10-1 Boom, Ram, Components Monoboom
| 13***18 | Capscrew | 14 |
| 33***37 | Wiper, Pin Bushing; Replaces Lau0047 | 4 |
| 33***44 | Pin Bushing; Replaces Lku0074 | 2 |
E4-14-1 Bucket Ram, Components
| 13***18 | Capscrew | 14 |
| 33***37 | Wiper, Pin Bushing; Replaces Lau0047 | 2 |
| 33***40 | Pin Bushing; Replaces Lku0123 | 1 |
E4-16-1 Boom Ram Right-Side, Assembly, H.B.C.V. Monoboom
| 13***0D | Bolt | 2 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-18-1 Tab, Cylinder Position, Assembly
| 13***9Z | Bolt, M10x35 | 2 |
| 13***3Z | Bolt; Replaces 60***3r,60***13 | 1 |
| 13***1Z | Nut | 2 |
E4-2-1 Hydraulic Oil Hp32
| 40***00 | Fluid, Hydraulic Oil | 320 |
| 40***01 | Fluid, Hydraulic Jcb Hp32, 5 Litres | 1 |
| 81***50 | Hydraulic Oil Label (Hp32 | 1 |
E4-21-10 Dipper, Ram, Components Tab With Hbcv
| 33***45 | Piston, Dipper Ram, 15***mm; Replaces Lpu0102 | 1 |
| 33***67 | Cushion, Ring; Replaces Lmu0345 | 1 |
| 33***37 | Wiper, Pin Bushing; Replaces Lau0047 | 4 |
E4-1-1 Hydraulic Oil Hp46
| 40***00 | Jcb Hydraulic Fluid | 320 |
| 40***01 | Fluid, Hydraulic 46, 5 Litre | 1 |
| 40***02 | Fluid, Hydraulic 46, 25 Litre | 1 |
E4-15-1 Boom Ram Left-Side, Assembly, H.B.C.V. Monoboom
| 13***0D | Bolt | 2 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-24-1 Ram Bucket, Long Reach, 8.07m Arm
| 13***0D | Bolt | 2 |
| 13***2D | Bolt, M12x50 | 1 |
| 13***3D | Nut, Self Lock M10 | 2 |
F Track/Slew Gearbox, L
F4-3-1 Swing, Assembly
| 05***00 | Gearbox, Swing, Js240, 260 | 1 |
| 13***7Z | Screw, M12x30; Replaces 60***07 | 3 |
| 13***8Z | Bolt; Replaces 60***18 | 45 |
F4-1-1 Motor/Gearbox, Assembly
| 20***65 | Motor, & Gearbox | 4 |
| 20***20 | Hydraulic Motor, Track Motor/Gearbox | 1 |
| 20***87 | Cover, Assembly, Track Motor/Gearbox; Replaced By 05/90***21, See San 21369 | 1 |
F4-0-1 Track, Motor, & Sprocket Assembly
| 13***4Z | Bolt; Replaces 60***14 | 52 |
| 13***5Z | Bolt | 44 |
| 21***57 | Assembly, Traction Motor Line | 1 |
F4-4-1 Gearbox, Swing
| 05***00 | Gearbox, Swing, Js240, 260 | 1 |
| 05***40 | O Ring | 2 |
| 20***70 | Bearing | 1 |
F4-5-1 Greasing, Swing
| 13***1D | Screw | 2 |
| 14***6Z | Washer, Spring | 2 |
| JH***37 | Nipple, Grease, Straight | 3 |
J Track & Running Gear, Undercarriage
J1-60-1 Track Shoe 600mm 47l, Assembly, Nc/Sc
| 33***53 | Link, Right | 47 |
| 33***55 | Link, Left | 47 |
| 33***56 | Bush, Track | 46 |
J1-9-10 Idler Wheel
| 82***92 | O Ring | 2 |
| JB***36 | Hub | 2 |
| JR***26 | Plug | 1 |
J1-66-1 Track Shoe 800mm 47l, Assembly (Step Ext), Nc/Sc
| 13***4D | Bolt, M12 X 60 | 16 |
| 13***3D | Nut, M12 | 16 |
| 33***53 | Link, Right | 47 |
J1-4-30 Undercarriage, Assembly, Ncxd
| 13***5Z | Screw, M12x20; Replaces 60***5r | 3 |
| 13***9Z | Bolt | 8 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 11 |
J1-1-20 Undercarriage, Assembly, Lc
| 21***13 | G.A., Centre Joint | 1 |
| 21***55 | Undercarriage, Js240/260 | 1 |
| 21***57 | Assembly, Traction Motor Line | 1 |
J1-63-1 Track Shoe 700mm 47l, Assembly, Nc/Sc
| 33***53 | Link, Right | 47 |
| 33***55 | Link, Left | 47 |
| 33***56 | Bush, Track | 46 |
J1-5-1 Roller, Track Top, Assembly Nc/Sc/Lc
| 13***2Z | Bolt | 8 |
| 33***41 | Roller, Assembly, Track Top | 4 |
| 41***52 | Loctite, Threadlock, 200ml | 0 |
J1-10-1 Recoil Spring, Assembly Nc/Sc/Lc
| 13***2Z | Bolt; Replaces 60***2r | 4 |
| 41***52 | Loctite, Threadlock, 200ml | 0 |
| 9G***26 | Assembly, Recoil Spring | 1 |
J1-1-1 Undercarriage, Assembly Nc
| 21***13 | G.A., Centre Joint | 1 |
| 21***51 | Undercarriage, Js240/260 | 1 |
| 21***57 | Assembly, Traction Motor Line | 1 |
J1-68-1 Track Shoe 900mm 47l, Assembly (Step Ext), Hd Nc/Sc
| 13***4D | Bolt, M12 X 60 | 16 |
| 13***3D | Nut, M12 | 16 |
| 33***53 | Link, Right | 47 |
J1-69-1 Track Shoe 900mm 51l, Assembly (Step Ext), Hd Lc
| 13***4D | Bolt, M12 X 60 | 16 |
| 13***3D | Nut, M12 | 16 |
| 33***53 | Link, Right | 51 |
J1-4-10 Undercarriage, Assembly, Sc
| 13***5Z | Screw, M12x20; Replaces 60***5r | 3 |
| 13***9Z | Bolt | 8 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 11 |
J1-1-10 Undercarriage, Assembly, Sc
| 21***13 | G.A., Centre Joint | 1 |
| 21***53 | Undercarriage, Js240/260 | 1 |
| 21***57 | Assembly, Traction Motor Line | 1 |
J1-3-10 Circuit, Track Motor, Sc, Scxd
| 41***52 | Loctite, Threadlock, 200ml | 0 |
| JG***47 | Assembly, Traction Motor Line | 1 |
| KT***78 | Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Lh Travel. Port Pb1 To Travel Pedal Port 1. Lh Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Rh Travel. Port Pb6 To Travel Pedal Port 4. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 4 To Main Control Valve Port Pb6. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port C8 To Main Control Valve Port Pc3. Swing Priority, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 2 To Main Control Valve Port Pb1. Left Hand Track Forward. | 2 |
J1-11-10 Cover, Lower, Undercarriage, Ncxd, Scxd
| 13***0Z | Bolt | 8 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 8 |
| JH***42 | Washer, Plain | 8 |
J1-64-1 Track Shoe 700mm 51l, Assembly
| 33***53 | Link, Right | 51 |
| 33***55 | Link, Left | 51 |
| 33***56 | Bush, Track | 50 |
J1-9-20 Recoil Unit
| 13***3Z | Screw; Replaces 60***03 | 2 |
| 13***2Z | Bolt; Replaces 60***2r | 4 |
| 60***7Z | Capscrew | 1 |
J1-65-1 Track Shoe 700mm 51l, Assembly Hd, Lc
| 33***53 | Link, Right | 51 |
| 33***55 | Link, Left | 51 |
| 33***56 | Bush, Track | 50 |
J1-8-1 Track, Motor, & Sprocket Assembly
| 13***4Z | Bolt; Replaces 60***14 | 52 |
| 13***5Z | Bolt | 44 |
| 21***57 | Assembly, Traction Motor Line | 1 |
J1-4-20 Undercarriage, Assembly, Lc, Lcxd
| 13***5Z | Screw, M12x20; Replaces 60***5r | 3 |
| 13***9Z | Bolt | 8 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 11 |
J1-2-10 Roller, Track Bottom, Sc, Scxd
| 13***0D | Bolt, M18 X 130mm | 56 |
| 32***29 | Plug, Tapered | 1 |
| 33***22 | Seal, Assembly | 2 |
J1-1-50 Undercarriage, Assembly, Lcxd
| 21***13 | G.A., Centre Joint | 1 |
| 21***56 | Undercarriage | 1 |
| 21***57 | Assembly, Traction Motor Line | 1 |
J1-3-1 Circuit, Track Motor, Nc, Ncxd
| 41***52 | Loctite, Threadlock, 200ml | 0 |
| JG***29 | Assembly, Motor Line | 1 |
| KT***78 | Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Lh Travel. Port Pb1 To Travel Pedal Port 1. Lh Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Rh Travel. Port Pb6 To Travel Pedal Port 4. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 4 To Main Control Valve Port Pb6. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port C8 To Main Control Valve Port Pc3. Swing Priority, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 2 To Main Control Valve Port Pb1. Left Hand Track Forward. | 2 |
J1-2-1 Roller, Track Bottom, Nc, Ncxd, Lc, Lcxd
| 13***0D | Bolt, M18 X 130mm | 72 |
| 32***29 | Plug, Tapered | 1 |
| 33***22 | Seal, Assembly | 2 |
J1-6-1 Track Guides, Assembly Nc/Sc/Lc
| 13***2Z | Bolt | 8 |
| 21***83 | G.A., U/C 2200 Sc Rail | 1 |
| 33***32 | Guide, Track; Replaces Jg0ra026, San 13275 | 2 |
J1-1-40 Undercarriage, Assembly, Scxd
| 21***13 | G.A., Centre Joint | 1 |
| 21***54 | G.A, Undercarriage Assembly Scxd | 1 |
| 21***57 | Assembly, Traction Motor Line | 1 |
J1-1-30 Undercarriage, Assembly, Ncxd
| 21***13 | G.A., Centre Joint | 1 |
| 21***52 | G.A, Undercarraige Assembly Nlxd | 1 |
| 21***57 | Assembly, Traction Motor Line | 1 |
J1-4-1 Undercarriage, Assembly Nc
| 13***5Z | Screw, M12x20; Replaces 60***5r | 3 |
| 13***9Z | Bolt | 8 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 11 |
J1-61-1 Track Shoe 600mm 51l, Assembly, Lc
| 33***53 | Link, Right | 51 |
| 33***55 | Link, Left | 51 |
| 33***56 | Bush, Track | 50 |
J1-4-40 Undercarriage, Assembly, Scxd
| 13***5Z | Screw, M12x20; Replaces 60***5r | 3 |
| 13***9Z | Bolt | 8 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 11 |
J1-3-20 Circuit, Track Motor, Lc, Lcxd
| 41***52 | Loctite, Threadlock, 200ml | 0 |
| 9G***33 | Assembly, Traction Motor Line | 1 |
| KT***78 | Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Lh Travel. Port Pb1 To Travel Pedal Port 1. Lh Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Rh Travel. Port Pb6 To Travel Pedal Port 4. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 4 To Main Control Valve Port Pb6. Right Hand Track Forward., Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port C8 To Main Control Valve Port Pc3. Swing Priority, Hose, 1/4" Bsp St-St 2800mm; Replaces Ktj0810, Port 2 To Main Control Valve Port Pb1. Left Hand Track Forward. | 2 |
J1-67-1 Track Shoe 800mm 51l, Assembly (Step Ext), Lc
| 13***4D | Bolt, M12 X 60 | 16 |
| 13***3D | Nut, M12 | 16 |
| 33***53 | Link, Right | 51 |
J1-7-1 Centre Joint, Assembly Nc/Sc/Lc
| 13***8D | Screw | 11 |
| 14***11 | Seal, Bonded | 6 |
| 21***13 | G.A., Centre Joint | 1 |
J1-9-1 Recoil & Idler Assy, Assembly Nc/Sc/Lc
| 13***2Z | Bolt; Replaces 60***2r | 4 |
| 9G***25 | Assembly, Take-Up Roller | 1 |
| JB***65 | Assembly, Recoil/Spring/Roller | 0 |
J1-11-1 Cover, Lower, Undercarriage, Nc, Sc, Lc, Lcxd
| 13***1D | Bolt, M12 X 45 | 8 |
| 21***75 | Assembly, Lower Under Covers | 1 |
| JH***42 | Washer, Plain | 8 |
J1-62-1 Track Shoe 600mm 51l, Assembly Hd, Lc
| 33***53 | Link, Right | 51 |
| 33***55 | Link, Left | 51 |
| 33***56 | Bush, Track | 50 |
R Engine Isuzu 4hk1xysj-02 T3
R1-6-2 Camshaft, & Timing Gears
| 02***09 | Washer, Cam | 1 |
| 02***69 | O Ring | 1 |
| 02***08 | Bolt, Camshaft Gear | 1 |
R1-7-1 Flywheel & Housing
| 02***69 | O Ring | 1 |
| 02***47 | Plate, Clamping | 1 |
| 02***26 | Gear, Flywheel Ring | 1 |
R1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***54 | Washer, Thrust | 1 |
| 02***55 | Washer, Thrust | 2 |
| 02***58 | Bolt, Con-Rod | 8 |
R1-3-1 Block Assembly
| 02***79 | Plug, O/D = 22mm | 3 |
| 02***93 | Pin | 4 |
| 02***97 | Pin, Set Cylinder Head | 2 |
R1-8-1 Engine Mountings
| 13***7D | Screw | 8 |
| 13***1D | Setscrew, M16 X 45 | 8 |
| 13***4D | Bolt, M16 X 140 | 4 |
R1-6-1 Timing Case, & Front Cover
| 02***82 | Gasket, Gear Case, To Cylinder Block | 1 |
| 02***02 | Bolt, L=55 | 3 |
| 02***67 | Valve | 1 |
R1-5-2 Fan,Viscous, Eu Option
| 13***3D | Screw | 1 |
| 13***5D | Bolt | 2 |
| 13***3D | Capscrew | 4 |
R1-5-1 Pulleys, & Fan Belt
| 02***92 | Bolt, Crankshaft Pulley | 4 |
| 02***30 | Pulley, Crankshaft | 1 |
| 02***36 | Belt, Fan | 1 |
R1-5-3 Fan, Non Eu Option
| 13***9D | Bolt, M8 X 90 | 4 |
| 21***63 | G.A., Non Eu Fan | 1 |
| 30***65 | Fan, Puller, 650mm | 1 |
R1-1-1 Engine, Complete, 4hk1-Xysj02
| 01***71 | Engine, Complete, 140kw @ 2000rpm | 1 |
R2-3-1 Rocker Cover
| 02***75 | Plate, Oil Baffle | 1 |
| 02***78 | Seal, Oil Filler Cap | 1 |
| 02***79 | Cap, Engine Oil Filler | 1 |
R2-2-1 Rocker Assembly, Inlet/Exhaust Valves
| 02***71 | Seal, Valve Stem | 16 |
| 02***77 | Collar, Split | 32 |
| 02***28 | Valve, Inlet | 8 |
R2-1-1 Cylinder Head
| 02***87 | Stud, M10 X 60 L=75 | 2 |
| 02***91 | Stud, Camshaft Bracket, M8 X 41 L=66 | 8 |
| 02***92 | Stud, Camshaft Bracket, M8 X 54 L=79 | 2 |
R2-6-1 Lifting Plates, Engine
| 02***72 | Bolt, Flange Head, M10 X 20 | 2 |
| 02***57 | Plate, Lift Front | 1 |
| 02***33 | Bolt | 3 |
R2-4-1 Oil Separator
| 01***43 | Strainer, Oil Separator | 1 |
| 01***57 | Hose, Oil Drain | 1 |
| 01***58 | Clip, Hose | 2 |
R3-3-1 Filter, Air
| 13***1D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
R3-4-1 Exhaust System
| 13***0D | Bolt | 3 |
| 13***1Z | Nut | 8 |
| 21***40 | G.A, Exhaust System, Tier 3 Engine Change | 1 |
R3-5-1 Exhaust, Recirculation
| 02***38 | Nut | 3 |
| 02***62 | Gasket | 2 |
| 02***34 | Bolt | 1 |
R3-2-1 Manifold, Exhaust
| 02***44 | Gasket | 1 |
| 02***79 | Clip | 2 |
| 02***69 | Spacer | 8 |
R3-3-2 Filter, Air, With Pre-Cleaner
| 13***1D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
R3-3-5 Filter, Air, Turbo 2 Pre-Cleaner, 260xd Machine
| 22***17 | Clip, Worm Drive | 2 |
| 26***05 | Filter, Assembly, Pre-Cleaner | 1 |
| 33***25 | Foam, Air Cleaner, Outer | 1 |
R3-3-4 Filter, Air, Turbo 2 Pre-Cleaner
| 22***17 | Clip, Worm Drive | 2 |
| 26***05 | Filter, Assembly, Pre-Cleaner | 1 |
| 33***25 | Foam, Air Cleaner, Outer | 1 |
R3-3-3 Filter, Air, 260xd Machine
| 13***1D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
R3-1-1 Manifold, Induction
| 02***61 | Gasket | 1 |
| 02***62 | Clip, Hose | 2 |
| 02***59 | Gasket | 1 |
R4-7-1 Exhaust, Recirculation, Water Cooling
| 02***83 | Hose, Water Pipe | 2 |
| 02***43 | Nut, M8 | 4 |
| 02***67 | Clamp | 8 |
R4-4-2 Combination Cooler, Assembly Wide Core, Wide Core
| 21***15 | G.A, Radiator Wide Core, Js240/260 | 1 |
| 30***96 | Cowling, Fan | 1 |
| 30***97 | Plate, Upper | 1 |
R4-3-2 Cooler, Fittings & Mountings
| 13***8D | Screw, M8x30 | 2 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 6 |
| 13***9D | Bolt, Grade 12.9 | 3 |
R4-2-1 Thermostat, Housing, Inlet & Outlet
| 02***46 | Clip, Hose | 2 |
| 02***81 | Connector, Water Outlet | 1 |
| 02***82 | Gasket, Thermostat Housing | 2 |
R4-6-2 Cooler, Air Charge Wide Core, Hose & Pipework
| 13***1D | Nut, M10 | 4 |
| 14***8D | Washer, M10 | 4 |
| 21***15 | G.A, Radiator Wide Core, Js240/260 | 1 |
R4-5-1 Radiator, Hoses & Fittings
| 13***3D | Screw | 2 |
| 14***5D | Washer | 2 |
| 21***08 | Tank, Expansion | 1 |
R4-3-1 Cooler, Fittings & Mountings
| 13***8D | Screw, M8x30 | 2 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 6 |
| 13***9D | Bolt, Grade 12.9 | 2 |
R4-6-1 Cooler, Air Charge, Hose & Pipework
| 13***1D | Nut, M10 | 4 |
| 14***8D | Washer, M10 | 4 |
| 33***22 | G.A, Combination Cooler, Std Js240/260 T3 | 1 |
R4-1-1 Pump Water
| 02***43 | Nut, M8 | 2 |
| 02***20 | Bolt | 2 |
| 02***21 | Bolt | 2 |
R4-5-2 Radiator Wide Core, Hoses & Fittings
| 13***3D | Screw | 2 |
| 14***5D | Washer | 2 |
| 21***08 | Tank, Expansion | 1 |
R4-4-1 Combination Cooler, Assembly, Standard
| 30***93 | Cooler, Charge Air | 1 |
| 30***94 | Radiator, Water | 1 |
| 30***95 | Cooler, Hydraulic Oil | 1 |
R4-8-1 Radiator, Fittings & Mountings
| 13***8D | Screw, M8x30 | 2 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 6 |
| 13***9D | Bolt, Grade 12.9 | 3 |
R4-8-2 Radiator Wide Core, Fittings & Mountings
| 13***8D | Screw, M8x30 | 2 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 6 |
| 13***9D | Bolt, Grade 12.9 | 3 |
R5-2-1 Pump, Oil
| 02***11 | Bolt, Flange Head, M8 X 25mm | 2 |
| 02***92 | Gear, Idler, Oil Pump | 1 |
| 02***14 | Bolt | 2 |
R5-3-1 Oil Filter, Remote Mounted
| 13***1D | Bolt, M10 X110mm | 2 |
| 13***4D | Bolt, M10x140 | 2 |
| 13***5D | Bolt, M8x65 | 1 |
R5-4-1 Cooler, Engine Oil
| 02***33 | O Ring | 1 |
| 02***34 | O Ring | 2 |
| 02***35 | Adapter, Oil Port | 1 |
R5-1-1 Sump, Oil, & Fittings
| 02***94 | Seal, Id=27 | 1 |
| 02***18 | Spacer | 1 |
| 02***48 | Gasket | 1 |
R6-1-1 Pump, Fuel Injection, Installation
| 02***16 | Stud, Water Pump | 1 |
| 02***24 | Key | 1 |
| 02***28 | Bolt | 1 |
R6-6-2 Pre-Filter, Fuel Sediment, 5 Micron
| 21***19 | G.A, Fuel System, Js330 Auto | 1 |
| 32***08 | Bowl, Assembly | 1 |
| 32***33 | Seal, O'Ring | 1 |
R6-9-1 Refuelling Pump, Assembly
| 13***3D | Screw | 2 |
| 13***0D | Bolt | 2 |
| 14***8D | Washer, M10 | 4 |
R6-2-1 Injectors, Fuel, & Injection Pipes
| 02***49 | Washer, Seal | 4 |
| 02***21 | Bolt, Banjo | 2 |
| 02***99 | Bolt | 4 |
R6-7-1 Filter, Fuel, Short 4 Micron
| 02***96 | Plug | 1 |
| 02***97 | Plug | 1 |
| 02***98 | Plug | 1 |
R6-4-1 Fuel System
| 13***7D | Setscrew, M6 X 25 | 2 |
| 13***7D | Screw | 2 |
| 13***8D | Capscrew, M10x30 | 2 |
R6-8-1 Fuel Lift Pump
| 02***95 | Collar | 2 |
| 02***96 | Grommet | 2 |
| 17***00 | Pump, Fuel Feed | 1 |
R6-6-1 Filter, Fuel Sediment, 5 Micron
| 21***19 | G.A, Fuel System, Js330 Auto | 1 |
| 32***08 | Bowl, Assembly | 1 |
| 32***33 | Seal, O'Ring | 1 |
R6-4-2 Fuel System, Twin Filter
| 13***7D | Setscrew, M6 X 25 | 2 |
| 13***8D | Screw, M8x30 | 4 |
| 13***7D | Screw | 2 |
R6-7-2 Filter, Fuel, Long 2 Micron
| 02***96 | Plug | 1 |
| 32***39 | Gasket | 1 |
| 32***40 | Float, Water Level | 1 |
R6-3-1 Fuel Pipes, Injection Pump
| 02***21 | Bolt, Banjo | 2 |
| 02***15 | Bolt, Banjo | 1 |
| 02***17 | Bolt | 1 |
R7-6-1 Compressor 24volt, Air Conditioning
| 12***99 | Compressor, 24v | 1 |
| 14***67 | Cover, Bearing Dust | 1 |
| 26***84 | Coil, Field | 1 |
R7-5-1 Compressor, Installation
| 13***1D | Screw, Set M6x12 | 1 |
| 13***8D | Bolt | 6 |
| 13***3D | Nut, Self Lock M10 | 2 |
R7-5-2 Compressor, Installation
| 13***3D | Screw | 1 |
| 13***8D | Bolt | 6 |
| 13***3D | Nut, Self Lock M10 | 4 |
R7-3-1 Turbocharger, Pipework
| 02***87 | Gasket | 1 |
| 02***53 | Bolt, M10x28 Flanged | 1 |
| 02***18 | Bolt | 3 |
R7-2-1 Turbocharger, Installation
| 02***38 | Nut | 5 |
| 02***13 | Stud | 9 |
| 02***94 | Gasket | 1 |
R7-1-1 Turbocharger
| 02***06 | Turbocharger | 1 |
R8-1-2 Gasket Set, Engine Head
| 02***35 | Kit-Gasket, Engine Head | 1 |
R8-1-1 Gasket Set, Engine Overhaul
| 02***75 | Gasket, Engine Overhaul | 1 |
JS260 serial number reference
Locate the machine identification plate on the outside of the cab. The machine serial number is inscribed on the baseplate of the rear frame. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 1504700 - 1505099 | JS240-260 Tier 3 excavators | |
| 1773500 - 1774499 | JS240 - JS260 Tier 3 excavators | |
| 2050000 | JS260 Tier 4 tracked excavator |
Frequently asked questions
What engine does the JCB JS260 use?
The JCB JS260 uses an Isuzu 4HK1X turbocharged, water-cooled diesel engine meeting Tier 4i emissions standards, with 187 HP (139 kW) net power and 198.3 HP (147.9 kW) gross power.
What is the operating weight of the JCB JS260?
The operating weight is 25,845 kg (56,979 lbs), varying by configuration, counterweight, and attachment package.
What replaced the JCB JS260?
The JS260 was succeeded by newer generations in the JCB JS-series excavator line, which continue to use Isuzu engines with updated emissions compliance (e.g., Stage V/Tier 4 Final).
What JS260 owners discuss
What engine powers the JCB JS260, and how does the Tier 4 Ecomax version compare to the earlier Dieselmax?
The JCB JS260 uses an Isuzu 4HK1X engine (140 kW / 188 hp at 2000 rpm) for European Tier 4i compliance. The 2014+ JS260 models utilize JCB’s Tier 4 Final Ecomax engine, which uses up to 9 percent less fuel than the previous Dieselmax engine. Net power for the platform is rated at 197 hp (147 kW). The engine produces high torque at lower RPMs for fuel efficiency. Have your dealer verify the specific engine serial and emissions tier for the machine's build year.
What are the known hydraulic and powertrain behaviors for the JS260?
The JS260 features a variable flow load sensing hydraulic system with flow-on-demand and variable power output. The machine is designed to deliver high digging force and efficient cycle times. The powertrain is tuned to maintain performance at lower engine speeds. Hydraulic oil must be sampled and checked for contamination and degradation at recommended intervals to protect high-precision components. Fluid specifications vary by configuration and series; consult the specific machine's operation and maintenance manual for exact capacities and types.
What undercarriage and wear patterns are typical for the JS260?
The JS260LC (Long Counterweight) configuration typically features a 700 mm track width. Operating weights vary by configuration: the standard JS260 is approximately 26,450 kg (58,312 lbs), while the JS260LC reaches 27,750 kg (61,160 lbs). Track shoe options include single, double, or triple grouser setups with or without mud-holes. Undercarriage wear depends heavily on application; extreme service pads are available for heavy-duty conditions. Verify the exact track width and shoe configuration against the machine's data plate.
What electrical or sensor issues are commonly reported by JS260 owners?
Owners report HVAC and wiper motor failures linked to a shared harness coming from the front of the cab. Bypassing the relay often restores function, indicating a relay or power feed issue in the fuse/relay box. Shutdown issues with an exclamation point warning often indicate engine protection activation due to sensor faults or overheating.
What engine quirks or maintenance items should JS260 operators monitor?
Starting problems are a common issue, often related to battery health or fuel system faults. Low power output can result from fuel filter blockages or sensor errors. Brown sludge in the expansion bottle indicates silicate separation in the coolant, necessitating strict adherence to coolant change intervals.
What is the correct serial number format and location for the JS260?
The JS260 uses a 17-digit Product Identification Number (PIN) format. The PIN structure includes: Positions 1-3 (World Manufacturer Code 'JCB'), Positions 4-6 (Machine Type/Model, e.g., 'JS26D'), Position 7 (Check Letter), and Positions 8-17 (Machine Serial Number). The data plate is located on the outside of the cab, and the serial number is inscribed on the baseplate of the rear frame. Serial ranges for Tier 4 service manuals begin at the OEM part reference. Verify the PIN against the machine identification plate.
What should be checked when buying a used JS260?
Verify the support network in your area, as parts availability can vary. Check the engine hours and condition of the Tier 4 emissions system (DPF/SCR if applicable). Inspect the hydraulic system for leaks and test the load sensing response. Check the HVAC and wiper electrical connections for corrosion or broken relays.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb JS260. Related factory variants of the same model family:
JS260
Need a specific JS260 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.