JCBagriculturaljs wheeled excavators
Jcb JS200W-T2
Maintenance schedule, common problems & OEM parts breakdown
The JCB JS200W-T2 is a 20-tonne class wheeled excavator manufactured from 2015 to 2021, succeeding the JS200W TAB and preceding the JS200W T3. It is powered by a 128 kW (173 hp) Isuzu engine or JCB EcoMAX 448 TCA-99 compliant with EU Stage IIIB and EPA Tier 4 Interim emissions standards. Operating weight ranges from 19,618 kg to 22,490 kg depending on configuration, with a bucket capacity of 0.4 to 1.19 m³. The machine features a fully enclosed box-section revolving frame, Bosch Rexroth hydraulic valve blocks and pumps, and a selectable axle lock. Configurations include dual or single wheel setups, with the latter reducing weight by 400 kg, and options for 1.91 m or 2.4 m dipper lengths.
The JS200W-T2 generation introduced JCB’s Dieselmax T2 engines, which eliminated DEF and DPF requirements to extend engine oil intervals to 500 hours, a key selling point for contractors seeking reduced downtime. This machine matters in the used market because its additive maintenance schedule (10/100/the OEM part reference/2000 hours) differs significantly from competitors like Caterpillar or Komatsu, requiring specific service knowledge. The T2 series bridges the gap between older Tier 2/3 models and modern Tier 4f units, offering a balance of high torque at low revs and simplified emissions compliance. Parts availability remains strong due to the shared platform with the JS200 and JS210 series, but fluid specifications and electronic diagnostics require JCB ServiceMaster tools, distinguishing it from earlier non-electronic variants.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb JS200W-T2 specifications
Engine
| Model | JCB EcoMAX 448 TCA-99 |
| Emissions Tier | EU Stage IIIB, EPA Tier 4 Interim |
| Type | Water cooled, 4-stroke, 4-cylinder in-line, direct injection, turbocharged diesel |
| Displacement | 293 cu in (4.8 L) |
| Net Power | 138 hp (103 kW) |
| Rated Power | 172 hp (128 kW) |
| Power Measured @ | 1950 rpm |
| Aspiration | Turbocharged |
| Injection | Electronic injection |
| Air Filter Type | Dry element with secondary safety element and in cab warning indicator |
| Starting System | 24 volt – 4kW |
| Alternator | 55 amps |
| Battery | 2 x 12 volt Heavy Duty |
Weights
| Operating Weight (Dual Wheels) | 22,000 kg (48,502 lb) |
| Operating Weight (Single Wheels) | 21,600 kg (47,619 lb) |
| Transport Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length (1910mm dipper) | 9.45 m (31.01 ft) |
| Transport Length (2400mm dipper) | 9.35 m (30.68 ft) |
| Transport Length (3000mm dipper) | 9.28 m (30.45 ft) |
| Transport Height (1910mm dipper) | 3.06 m (10.04 ft) |
| Transport Height (2400mm dipper) | 3.99 m (13.08 ft) |
| Transport Height (3000mm dipper) | 2.88 m (9.44 ft) |
| Overall Width | 2.49 m (8.17 ft) |
| Ground Clearance | 0.35 m (1.15 ft) |
| Height To Top Of Cab | 3.15 m (10.34 ft) |
| Upper Structure Clearance | 1.31 m (4.3 ft) |
| Track Shoe Width | Not documented for this exact serial range — verify with your dealer |
| Undercarriage Length | Not documented for this exact serial range — verify with your dealer |
Performance
| Max Dig Depth (1910mm dipper) | 5.26 m (17.26 ft) |
| Max Dig Depth (2400mm dipper) | 5.79 m (19.0 ft) |
| Max Dig Depth (3000mm dipper) | 6.38 m (20.9 ft) |
| Max Vertical Wall Dig Depth (1910mm dipper) | 4.54 m (14.9 ft) |
| Max Vertical Wall Dig Depth (2400mm dipper) | 5.24 m (17.2 ft) |
| Max Vertical Wall Dig Depth (3000mm dipper) | 5.84 m (19.17 ft) |
| Max Reach at Ground (1910mm dipper) | 8.87 m (29.11 ft) |
| Max Reach at Ground (2400mm dipper) | 9.31 m (30.55 ft) |
| Max Reach at Ground (3000mm dipper) | 9.85 m (32.32 ft) |
| Max Cutting Height (1910mm dipper) | 9.19 m (30.16 ft) |
| Max Cutting Height (2400mm dipper) | 9.43 m (30.94 ft) |
| Max Cutting Height (3000mm dipper) | 9.63 m (31.6 ft) |
| Max Loading Height (1910mm dipper) | 6.47 m (21.23 ft) |
| Max Loading Height (2400mm dipper) | 6.76 m (22.18 ft) |
| Max Loading Height (3000mm dipper) | 6.98 m (22.91 ft) |
| Swing Speed | 10 rpm |
| Max Travel Speed | 30.1 km/h (18.7 mph) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
| Drawbar Pull | Not documented for this exact serial range — verify with your dealer |
Forces
| Bucket Digging Force | 125 kN (28,108 lbf) |
| Stick/Arm Digging Force | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 310 L (81.9 gal) |
| Hydraulic System Fluid Capacity | 200 L (52.9 gal) |
| Engine Oil Capacity | 19.7 L (5.2 gal) |
| Cooling System Fluid Capacity | 25.7 L (6.8 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb JS200W-T2 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the JS200W-T2 beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline oil sampling at the 500-hour interval is critical for the JS200W-T2’s Dieselmax or EcoMAX engines. Compare subsequent samples against this baseline to detect bearing wear or contamination 500–800 hours before failure. Inspect the hydraulic return filter magnet for metallic debris at every 500-hour service. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specifications. Do not substitute with generic oils lacking JCB verification, as the engine’s fuel injection system requires specific additive packages. Monitor coolant concentration to prevent corrosion in the closed box-section frame.
Corrective & Common Repairs
Common failures involve the Bosch Rexroth hydraulic pumps and valve blocks, which require precise pressure calibration. Check the max flow solenoid for open or short circuits (codes 113/213) using JCB ServiceMaster. Inspect the turbocharger boot and wastegate function at 1000 hours to prevent boost leaks. Replace the primary and secondary fuel filters promptly; dirty fuel is a primary cause of injector failure on common-rail Dieselmax engines. Verify slew ring bolt torque regularly, as loose bolts can lead to structural fatigue in the welded upper frame.
Overhaul & Rebuild Points
The 2000-hour deep service mandates hydraulic oil replacement and tank cleaning to prevent valve block contamination. Measure swing ring radial and axial play with dial indicators; excessive play indicates bearing wear requiring overhaul. Inspect the boom and dipper cushioned ends for shock load damage. Check injector spray patterns and replace nozzles if deviation is found. For wheeled configurations, inspect final drive and axle hub seals during the 2000-hour service. Structural integrity checks of the side frames and chassis are essential before major component replacement.
Seasonal & Environment Servicing
In cold climates, use JCB Super Universal Agricultural lubricants rated for -15°C to 30°C. Ensure the coolant expansion tank is filled with long-life coolant to prevent freezing. In dusty environments, monitor the air filter restriction indicator closely and clean the intercooler fins regularly. For hot operations, check the hydraulic oil cooler (part the OEM part reference) for blockage and verify fan belt tension. Inspect the 70/30 front screen and laminated glass roof for damage to maintain visibility. Grease all pivot points more frequently in abrasive conditions to prevent premature wear on the sealed hardened steel pins.
JS200W-T2 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 02/800001 | Element, Fuel Filter, Cartridge | Fuel system service | Check fitment → |
| 32/925760 | Element, Fuel Sediment Filter | Fuel system service | Check fitment → |
| 32/912001 | Element, Fuel Filter, Canister Type | Fuel system service | Check fitment → |
| 1096750860 | Bolt | Fuel system service | Check fitment → |
| 02/800097 | Filter, Assembly, Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
JS200W-T2 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 111 BOOM SP | Boom lower speed regulation output is open-circuited. | Broken wiring harness to the boom proportional valve solenoid or disconnected connector. | Inspect the wiring harness and connectors at the boom cylinder and main valve block for damage or loose pins. |
| 113 MAX FLW | Max flow solenoid is open-circuited. | Broken wiring to the main pump max flow solenoid or failed solenoid coil. | Check the electrical connection at the main pump solenoid and verify wire continuity to the ECU. |
| 211 BOOM SP | Boom lower speed regulation output is short-circuited. | Short to ground in the boom valve solenoid wiring or internal solenoid failure. | Measure resistance of the boom solenoid coil and inspect wiring for chafing against the frame. |
| 213 MAX FLW | Max flow solenoid is short-circuited. | Short to ground in the main pump max flow solenoid wiring or internal solenoid failure. | Check the electrical connection at the main pump solenoid and verify wire continuity to the ECU. |
| 212 INT LT | Interior light is short-circuited. | Short in the cabin lighting circuit or faulty interior light bulb/LED module. | Disconnect the interior light and check for short circuits in the wiring harness. |
| P0001 | Torque Reduction: IMV driver fault detected. | Fault in the engine ECU internal driver for the intake manifold valve or associated wiring. | Check the IMV solenoid connector and wiring; if intact, the engine ECU may require replacement. |
| P0002 | Torque Reduction: Rail Pressure Negative Control Error. | Fuel rail pressure sensor issue or high-pressure fuel pump regulation fault. | Check fuel pressure sensor wiring and connections; verify fuel supply and return lines. |
| P0070-87 | CAN bus message error from engine ECU. | Communication failure between the engine ECU and the machine controller. | Inspect CAN bus wiring harness for damage, corrosion, or loose connections at both ECUs. |
| P0089 | Torque Reduction: HPV open loop slope fault detected. | Issue with the High Pressure Fuel Pump (HPV) regulation or sensor feedback. | Check the HPV solenoid and sensor wiring; inspect the pump for mechanical binding. |
| P0091 | Torque Reduction: HPV driver in ECU fault detected. | Internal engine ECU driver failure for the HPV solenoid. | Verify HPV solenoid resistance; if normal, the engine ECU likely requires replacement. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
JS200W-T2 attachments & work tools
Buckets
The JCB JS200W is equipped with a standard 2.7m dipper and excavating bucket, with a rated capacity of 0.4 to 1.19 cubic meters. All buckets are fully welded steel with sealed, hardened steel pivot pins and replaceable wear parts. The machine features a 125kN bucket tearout force for high productivity.
Hydraulic hammers
Aftermarket hydraulic breakers weighing 2410 kg and 4507 kg are listed for the JS200 series, while 3365 kg breakers are specified for the JS150/JS160/JS175 range. The JS200W operates with a Bosch Rexroth load-sensed hydraulic system providing 105.5 gal/min flow capacity. Breaker selection must account for the machine's 22-tonne operating weight and hydraulic flow requirements.
Quick couplers
The JS200W utilizes a special JS range quickhitch system designed for fast attachment changing. Steelwrist offers hydraulic and mechanical couplers, as well as automatic couplers, for the 0-70 tonne range which includes this machine. The system is compatible with the machine's reinforced boom and dipper structure.
Thumbs/grapples
Strickland offers high-performance thumbs and grapples specifically for the JCB JS200 series to maximize excavation and material handling potential. Steelwrist lists finger grapples and multi-grapples for the 2-26 tonne range, which covers the JS200W. These attachments are designed to work with the machine's quickhitch system.
Rippers
Steelwrist provides mechanical ripper work tools for the 0-33 tonne excavator range, which includes the JS200W. Strickland also supplies rippers for the JS200 series to assist with breaking ground in demanding applications. These tools are designed to attach via the standard quickhitch interface.
Hydraulic-kit notes
The JS200W uses a Bosch Rexroth load-sensed hydraulic system with variable flow piston pumps. The hydraulic relief valve pressure is set to 4975 psi. The system provides a flow capacity of 105.5 gal/min to support high-flow attachments like hydraulic breakers and tiltrotators.
All JS200W-T2 assemblies by section
Every catalogued assembly group for the Jcb JS200W-T2. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A2-2-2 Weedcutter Mono, Installation
| JN***23 | Hose | 1 |
| JH***92 | Plug, 1/2in. | 2 |
| JN***44 | Hose | 1 |
A2-1-3 Bucket, General Purpose, 900mm Wide
| 51***04 | Pin, Locking, V29 | 4 |
| 98***23 | Bucket, General Purpose, 900mm Wide | 1 |
| 99***37 | Tooth, V29 Series, Syl | 4 |
A2-2-1 Weedcutter Mono
| JG***72 | Kit, Low Flow Clamping | 1 |
| JG***71 | Hose, Low Flow Line, Monoboom | 1 |
| JG***60 | Weedcutter Hydraulic Mono | 1 |
A2-1-6 Bucket, General Purpose, 1200mm Wide
| 51***04 | Pin, Locking, V29 | 5 |
| 98***26 | Bucket, General Purpose, 1200mm Wide | 1 |
| 99***37 | Tooth, V29 Series, Syl | 5 |
A2-1-10 Bucket, General Purpose, 1500mm Wide
| 51***04 | Pin, Locking, V29 | 6 |
| 98***31 | Bucket, General Purpose, 1500mm Wide | 1 |
| 99***37 | Tooth, V29 Series, Syl | 6 |
A2-1-1 Bucket, General Purpose, 600mm Wide
| 51***04 | Pin, Locking, V29 | 3 |
| 98***20 | Bucket, General Purpose, 600mm Wide | 1 |
| 99***37 | Tooth, V29 Series, Syl | 3 |
A2-1-8 Bucket, General Purpose, 1450mm Wide
| 51***04 | Pin, Locking, V29 | 6 |
| 98***30 | Bucket, General Purpose, 1450mm Wide | 1 |
| 99***37 | Tooth, V29 Series, Syl | 6 |
A2-1-4 Bucket, General Purpose, 1000mm Wide
| 51***04 | Pin, Locking, V29 | 4 |
| 98***24 | Bucket, General Purpose, 1000mm Wide | 1 |
| 99***37 | Tooth, V29 Series, Syl | 4 |
A2-5-1 Bucket, Scoop, General Purpose
| 33***10 | Adapter, V29 | 0 |
| 51***04 | Pin, Locking, V29 | 0 |
| 98***17 | Bucket, Scoop, G.P. 457mm, Js200 | 1 |
A2-1-7 Bucket, General Purpose, 1350mm Wide
| 51***04 | Pin, Locking, V29 | 5 |
| 98***28 | Bucket, General Purpose, 1350mm Wide | 1 |
| 99***37 | Tooth, V29 Series, Syl | 5 |
B Bodywork, Cab, Loader End
B1-2-10 Cover, Lower, Mainframe, Hyd Raised Cab
| 33***56 | Cover, Under | 1 |
| 33***07 | Plate, Bottom | 1 |
| 33***08 | Plate, Belly | 1 |
B1-5-6 Cowlings, Top Cover
| 13***1Z | Nut, High Strength, M10 | 1 |
| 33***94 | Frame, Right Hand Grille, Js200 T2 | 1 |
| 33***30 | Frame, Left Hand Grille | 1 |
B1-11-1 Rear Dozer, Reflector, Bracket Kit
| 13***3Z | Nut | 2 |
| 13***5Z | Screw, M5 X 20 | 2 |
| 14***55 | Chain | 2 |
B1-5-7 Cowlings, Top Cover, Js200w Wastemaster
| 13***1Z | Nut, High Strength, M10 | 1 |
| 33***94 | Frame, Right Hand Grille, Js200 T2 | 1 |
| 33***30 | Frame, Left Hand Grille | 1 |
B1-5-10 Cowlings, Fig 1
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 6 |
| 13***8Z | Screw | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
B1-5-2 Cowlings, Engine Cover
| 13***5Z | Screw, M12x20; Replaces 60***5r | 6 |
| 13***1Z | Nut, High Strength, M10 | 2 |
| 14***2Z | Washer, Lock | 2 |
B1-4-1 Tank, Diesel Fuel
| 13***5Z | Screw, M12x20; Replaces 60***5r | 1 |
| 13***8Z | Screw | 1 |
| 13***5Z | Bolt | 6 |
B1-10-1 Blade, Dozer, Rear Mounted
| 10***10 | Pin, Pivot | 4 |
| 12***09 | Bush | 8 |
| 13***8Z | Screw | 4 |
B1-21-10 Stabiliser, Rear
| 10***17 | Pin, Pivot | 2 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***3Z | Bolt | 6 |
B1-5-11 Cowlings, Fig 1
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 6 |
| 13***8Z | Screw | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
B1-22-1 Auto Greasing, Front Axle
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
B1-9-2 Wheelchock, German
| 12***01 | Strap | 2 |
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 6 |
B1-6-2 Counterweight, Rear, T.A.B Boom
| 33***66 | Counterweight, Rear, T.A.B | 1 |
| 33***46 | Counterweight, Rear, Js200w Tab | 1 |
| JR***33 | Panel, Soundproofing | 1 |
B1-10-10 Blade, Dozer, Front Mounted
| 10***10 | Pin, Pivot | 4 |
| 12***09 | Bush | 8 |
| 13***8Z | Screw | 4 |
B1-21-1 Stabiliser, Front
| 10***17 | Pin, Pivot | 2 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***3Z | Bolt | 6 |
B1-5-1 Cowlings, Engine Cover
| 13***5Z | Screw | 2 |
| 13***5Z | Screw, M12x20; Replaces 60***5r | 6 |
| 13***1Z | Nut, High Strength, M10 | 2 |
B1-3-1 Tank, Hydraulic
| 13***3Z | Screw | 4 |
| 13***5Z | Screw, M10 X 20 | 4 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
B1-9-1 Chassis
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***8Z | Screw | 16 |
| 13***9Z | Bolt | 2 |
B1-1-2 Mainframe
| 21***15 | Mainframe | 1 |
| 33***12 | Platform, Left Hand | 1 |
| 33***72 | Plate, Side Profile | 1 |
B1-22-10 Auto Greasing, Stabiliser, Front & Rear
| 13***1Z | Nut | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 81***48 | Adapter, 2 Way | 2 |
B1-1-1 Mainframe
| JG***35 | Mainframe, Assembly | 1 |
| JR***53 | Platform, Right Hand | 1 |
| JG***36 | Frame, Revolving | 1 |
B1-6-30 Rear Mirror., Counterweight
| 13***1Z | Bolt; Replaces 60***1r | 1 |
| 14***9Z | Washer | 1 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 1 |
B1-5-3 Cowlings, Engine Cover
| 13***5Z | Screw, M12x20; Replaces 60***5r | 6 |
| 13***1Z | Nut | 4 |
| 13***1Z | Nut | 2 |
B1-5-30 Cowlings, Fig 3
| 13***1Z | Screw; Replaces 60***01,60***1r | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 13***3Z | Bolt; Replaces 60***3r,60***13 | 1 |
B1-5-20 Cowlings, Fig 2
| 13***1Z | Screw; Replaces 60***01,60***1r | 6 |
| 13***5Z | Screw | 6 |
| 13***7Z | Screw | 6 |
B1-6-1 Counterweight, Rear, Mono Boom
| JR***33 | Panel, Soundproofing | 1 |
| JR***57 | Counterweight, Rear | 1 |
| JR***35 | Panel, Soundproofing | 1 |
B1-2-2 Cover, Lower, Mainframe
| 33***56 | Cover, Under | 1 |
| JR***66 | Cover, Under | 1 |
| JR***68 | Cover, Under | 1 |
B1-2-1 Cover, Lower, Mainframe
| JR***66 | Cover, Under | 1 |
| JR***70 | Cover, Under | 1 |
| JR***68 | Cover, Under | 1 |
B1-21-20 Stabiliser, Front & Rear
| 12***21 | Bush | 8 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***1Z | Bolt | 1 |
B1-23-1 Hand Rails, Upper Structure
| 33***87 | Rail, Hand, Lh Upper Structur | 1 |
| 33***88 | Rail, Hand, Rh Upper Structur | 1 |
| 33***83 | Rail, Hand, Rear | 1 |
B1-5-5 Cowlings, Top Cover
| 13***1Z | Nut, High Strength, M10 | 1 |
| JR***25 | Panel, Insulation | 1 |
| JR***32 | Panel, Insulation | 1 |
B2-5-2 Console, Cab Servo Control, Right Hand
| 13***1Z | Nut, High Strength | 2 |
| 13***7Z | Capscrew, Socket Head | 4 |
| JH***46 | Washer, M10; Replaces Khj0183 | 4 |
B2-4-1 Console, Cab Servo Control, Left Hand
| 13***1Z | Nut, High Strength | 4 |
| 14***6Z | Washer, M6 | 4 |
| 14***6Z | Washer, Spring | 4 |
B2-4-2 Console, Cab Servo Control, Left Hand
| 13***1Z | Nut, High Strength | 2 |
| 13***7Z | Capscrew, Socket Head | 4 |
| 21***91 | Frame, Console, Left Hand | 1 |
B2-4-10 Console, Cab Servo Control, Left Hand, Fig 2
| 13***3Z | Screw | 1 |
| 13***1Z | Nut, High Strength | 3 |
| 13***1Z | Nut, High Strength, M10 | 3 |
B2-4-11 Console, Cab Servo Control, Left Hand, Fig 2
| 21***91 | Frame, Console, Left Hand | 1 |
B2-3-1 Seat
| 13***5Z | Bolt, High Tensile | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-2-1 Door & Components, Euro Cab
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 33***62 | Catch, Assembly, Js Cab | 1 |
B2-4-3 Console, Cab Servo Control, Left Hand
| 13***7Z | Capscrew, Socket Head | 4 |
| 14***6Z | Washer, Spring | 2 |
| 33***67 | Handle, Console, Left Hand | 1 |
B2-7-1 Mirrors, External
| 13***2Z | Bolt, M12x50 | 2 |
| 26***01 | Glass | 1 |
| 26***37 | Bracket, Mounting Mirror | 1 |
B2-9-1 Guard, Fops Cage
| 13***9Z | Bolt | 4 |
| 13***2Z | Bolt; Replaces 60***2r | 4 |
| 13***3Z | Nut, M16 | 4 |
B2-3-11 Seat, Suspension, Charcoal Grey
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***5Z | Capscrew | 4 |
| 13***7Z | Capscrew, M8x25mm | 1 |
B2-12-3 Rain Visor, Euro Cab
| 21***17 | Visor, Rain, Kit | 1 |
| 33***41 | Kit, Rain Guard | 1 |
B2-4-20 Console (Moving), Can Servo Control, Left Hand
| 13***01 | Screw, Grub | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 33***47 | Spindle, Console, L/H | 1 |
B2-10-1 Floor Components, Seat Slide &, Isolator Lever
| 13***5Z | Screw, M10 X 20 | 4 |
| 13***8Z | Capscrew | 8 |
| 14***1Z | Washer, M16 Plain | 1 |
B2-13-1 Cover, Cab, Overnight
| 99***00 | Cover, Cab | 1 |
B2-13-4 Vandal Guard, Euro Cab
B2-5-3 Console, Cab Servo Control, Right Hand
| 13***3D | Screw | 4 |
| 13***3Z | Screw | 4 |
| 13***7Z | Capscrew, Socket Head | 4 |
B2-11-1 Fire Extinguisher
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***3Z | Nut | 2 |
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
B2-1-20 Cab, Fig 3, Euro Cab
| 12***09 | Cap, Nut M8; Replaces 69***72 | 3 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***4Z | Bolt | 6 |
B2-16-1 Cab Mountings, Cab Foor & Mat
| 13***7D | Screw | 28 |
| 33***53 | Plate, Kick | 1 |
| 82***26 | Bolt | 4 |
B2-3-10 Seat, Air Suspension, Grey Brown Fabric / Sahara Pvc
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***5Z | Capscrew | 4 |
| 13***7Z | Capscrew, M8x25mm | 1 |
B2-12-1 Visor, Sun
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 60***3Z | Screw, Countersunk | 3 |
| JH***56 | Bracket, Visor | 1 |
B2-1-1 Cab, Fig 1, Euro Cab
| 12***09 | Cap, Nut M8; Replaces 69***72 | 7 |
| 13***8Z | Screw | 4 |
| 14***3Z | Screw | 2 |
B2-6-1 Wash/Wipe, Windscreen
| 13***1Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 14***5Z | Washer, Spring, M5 | 2 |
B2-10-10 Floor Components, Fig 2
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***37 | Stand, Rear | 1 |
B2-12-4 Rain Visor, Euro Cab
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
B2-1-10 Cab, Fig 2, Euro Cab
| 33***32 | Joint, Ball | 2 |
| 69***08 | Seal, Plastic | 1 |
| 69***12 | Frame, Assembly | 1 |
B2-20-1 Hyd Raise Cab
| 13***2D | Bolt, M20 X 120lg | 8 |
| 13***3Z | Nut, Self Lock | 8 |
| 25***36 | Valve, 3 Way Solenoid | 1 |
B2-3-2 Seat, Suspension, Grey Brown Fabric / Sahara Pvc
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***5Z | Capscrew | 4 |
| 13***7Z | Capscrew, M8x25mm | 1 |
B2-5-1 Console, Cab Servo Control, Right Hand
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 13***1Z | Nut, High Strength | 4 |
| 14***6Z | Washer, M6 | 4 |
B2-18-1 Direct Glazing, Replacement Material
| 41***01 | Sealant, Clear Dp2205, 310ml | 0 |
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
B3-2-10 Dipper 2.4m
| 17***VR | Nut, High Strength | 2 |
| 17***VZ | Nut | 2 |
| 60***5Z | Bolt | 1 |
B3-22-1 Dipper 5m Gooseneck, Material Handler
| 13***4D | Bolt, M16 X 140 | 4 |
| 13***3D | Nut, M16 | 4 |
| 33***03 | Dipper, 5m Gooseneck, Material Handler | 1 |
B3-6-1 Grab Stowage Bar, Chassis, Not To Be Fitted With Any Front Dozer
| 82***00 | Pin, Linch | 2 |
| JL***25 | Bar | 1 |
| JL***60 | Pin, Pivot | 2 |
B3-2-1 Dipper 1.91m
| 17***VR | Nut, High Strength | 2 |
| 17***VZ | Nut | 2 |
| 60***5Z | Bolt | 1 |
B3-5-1 Tipping Link, & Linkage
| 17***VZ | Nut | 4 |
| 33***96 | Pin, Locking | 1 |
| 60***6Z | Bolt | 1 |
B3-4-2 Boom Greasing, T.A.B Boom
| 13***1Z | Screw; Replaces 60***01,60***1r | 12 |
| 14***6Z | Washer, Spring | 12 |
| 16***02 | Adapter | 3 |
B3-20-1 Boom, 6.8m Long, Material Handler
| 17***VZ | Nut | 8 |
| 17***VR | Nut | 4 |
| 21***27 | G.A, 6.8m Mat. Handler, Boom | 1 |
B3-4-1 Boom Greasing, Mono Boom
| 13***8Z | Screw; Replaces 60***8r | 7 |
| 14***7Z | Washer, Spring | 7 |
| JS***96 | Manifold, 3 Way; Replaces Ktv0647 | 1 |
B3-3-1 Link, Transportation
| 33***17 | Link, Transport, Js160, Js210; Replaces Krp1693 | 1 |
| KR***93 | Link, Transport, Js160, Js210; Replaced By 33***17, See San 14482 | 1 |
B3-10-1 Boom, Lower, Triple Articulating
| 17***VZ | Nut; Replaces 172r024vr,173r024vz & 173r024vz | 6 |
| 17***VZ | Nut | 4 |
| 17***VZ | Nut; Replaced By 172r024vz, San 12088 | 6 |
B3-2-11 Dipper 2.4m, Low Flow
| 17***VR | Nut, High Strength | 2 |
| 17***VZ | Nut | 2 |
| 60***5Z | Bolt | 1 |
B3-2-20 Dipper 3.0m
| 17***VR | Nut, High Strength | 2 |
| 17***VZ | Nut | 2 |
| 60***5Z | Bolt | 1 |
B3-6-10 Grab Stowage Bar, Front Dozer, Option
| 33***29 | Bar, Grab, Front Dozer | 1 |
| 81***80 | Pin, Pivot | 2 |
| JG***84 | G.A, Grab Bar Dozer, Js200w | 1 |
B3-21-1 Dipper 4.0m, Material Handler
| 13***4D | Bolt, M16 X 140 | 2 |
| 13***3D | Nut, M16 | 2 |
| 17***VZ | Nut; Replaced By 173r020vz | 2 |
B3-1-1 Boom
| 17***VR | Nut, High Strength | 12 |
| 17***VZ | Nut | 20 |
| 17***VR | Nut | 4 |
B3-23-1 Boom Greasing, 6.8m Boom, Material Handler
| 13***8D | Screw, M8x30 | 8 |
| 14***7D | Washer, M8 Plain | 8 |
| 21***40 | G.A, 6.8m Boom Grease Lin, 200w Mat Handler | 1 |
B3-11-1 Boom, Upper, Triple Articulating
| 17***VZ | Nut; Replaces 172r024vr,173r024vz & 173r024vz | 2 |
| 17***VZ | Nut | 8 |
| 17***VZ | Nut; Replaced By 172r024vz, San 12088 | 2 |
B3-2-21 Dipper 3.0m, Low Flow
| 17***VR | Nut, High Strength | 2 |
| 17***VZ | Nut | 2 |
| 60***5Z | Bolt | 1 |
B5-3-1 Tools
| 40***07 | Grease, Cartridge, Hp 400 Gm | 1 |
| 40***17 | Grease, Hp, 400g X 24 | 1 |
| 82***02 | Bar, Tommy | 1 |
B5-5-1 Paint
| 42***01 | Thinners, 5 Litres | 0 |
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
B5-2-1 Decals
| 81***24 | Decal, Jcb Insignia (Black), Boom | 2 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
B5-25-1 Guide Charts, Ams
| 81***54 | Label, Chart, Guide, English, Wheeled | 1 |
| 81***55 | Label, Chart, Guide, English, Wheeled | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-1-1 Decals, Machine
| 81***39 | Decal, Hydraulic Bay, Left | 1 |
| 81***40 | Decal, Jcb Insignia, Counterweight 450 X 564 mm | 1 |
| 81***44 | Decal, Fuel Tank | 1 |
B5-10-1 Labels, Sound Pressure Level
| 81***08 | Label, Ear Protection | 1 |
| 81***26 | Label, Noise, 101 Lwa | 1 |
| 81***27 | Label, Sound Pressure Level, Internal 102 Db Lwa | 1 |
C Electrics-Machine, Cab & Engine
C1-1-2 Electrics, Machine
| 13***1Z | Screw; Replaces 60***01,60***1r | 5 |
| 13***8Z | Screw | 2 |
| 13***1Z | Screw; Replaces 60***01,60***1r | 1 |
C1-12-1 Harness, Dozer
| 70***19 | Cover, Switch Actuator, Dozer | 1 |
| 70***32 | Switch, 24v | 1 |
| 72***77 | Harness, Dozer | 1 |
C1-4-2 Light, Working, Additional
| 12***05 | Bracket | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C1-9-10 Bracket, Head Light
| 13***7Z | Bolt, M10x25 | 5 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 5 |
C1-10-1 Light,, Dipper Side, German Machine Only
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***1Z | Nut, M5-8 | 4 |
| 14***5Z | Washer, Spring, M5 | 4 |
C1-4-1 Light, Working, Boom And Toolbox
| 12***05 | Bracket | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***9Z | Screw | 2 |
C1-11-1 Light, Number Plate
| 70***00 | Light, Number Plate | 2 |
| 72***35 | Bulb, 24v 5w | 1 |
| JL***11 | Bracket, Lamp Mounting | 1 |
C1-2-1 Electrics, Cab
| 13***5Z | Screw | 3 |
| 13***1Z | Screw; Replaces 60***01,60***1r | 1 |
| 13***5Z | Screw, M10 X 20 | 1 |
C1-7-1 Harnesses & Switches, Auxiliary
| 70***00 | Switch, Hazard Warning | 1 |
| 70***35 | Switch, Pressure, Zf Transmission | 1 |
| 70***48 | Switch, Pressure 100bar, Low, Accumulater Brakes | 1 |
C1-1-1 Electrics, Machine
| 13***8Z | Screw | 2 |
| 13***1Z | Screw; Replaces 60***01,60***1r | 1 |
| 13***5Z | Bolt, High Tensile | 3 |
C1-5-2 Pump, Diesel, Refuelling
| 13***3Z | Screw | 4 |
| 13***5Z | Screw, M10 X 20 | 4 |
| 13***9Z | Bolt, M10x35 | 2 |
C1-3-2 Battery Installation, 24 Volt
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
| 70***20 | Battery, Wet | 2 |
| 70***24 | Battery, Dry | 2 |
C1-3-1 Battery Installation, 24 Volt
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
| 72***01 | Battery, Wet; Replaces Jhr0098,Khr1566 | 2 |
| 72***01 | Battery, Dry | 2 |
C1-9-3 Light, Head, 24 Volt, Right Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***09 | Light, & Side Repeater, Rh Dip, Lh Side | 1 |
C1-9-2 Light, Head, 24 Volt, Left Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***07 | Light, & Side Repeater, Lh Dip, Lh Side | 1 |
C1-7-2 Harnesses & Switches, Auxiliary
| 70***00 | Switch, Hazard Warning | 1 |
| 70***35 | Switch, Pressure, Zf Transmission | 1 |
| 70***52 | Switch, Pressure 5bar | 4 |
C1-6-1 Alarm, Reverse
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-13-1 Harness, Mac-Pactor
| 21***35 | G.A, Compactor Harnes | 1 |
| 70***04 | Cover, Switch Decal, Mac-Pactor | 1 |
| 70***31 | Switch, 24v | 1 |
C1-5-1 Pump, Diesel, Refuelling
| 13***1Z | Screw; Replaces 60***01,60***1r | 2 |
| 13***9Z | Bolt, M10x35 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
C1-9-1 Light, Head, 24 Volt
| 13***7Z | Bolt, M10x25 | 5 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 5 |
C1-8-1 Light, Rear
| 13***8Z | Screw, M8x30 | 4 |
| 13***1Z | Nut, M8 | 8 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
C2-1-1 Electrical Equipment
| 17***04 | Solenoid, 24.Volt, Solenoid, 24.Volt; 24.Volt - May Be Used In Place Of 17/10***01. When Fitting To 02/11***00 - 12.Volt Engine Disconnect And Discard Esos Resistor., Solenoid, 24.Volt; 24.Volt - May Be Used In Place Of 17/10***01. When Fitting To Engine 01/11***00 With 12.Voltsolenoid, Disconnect & Discard Esos Resistor. | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-14-2 Alternator
| 18***50 | Pulley, Alternator, Pulley; Gen | 1 |
| 18***40 | Nut, Nut; Pulley,Gen | 1 |
| 18***80 | Washer, Plain, Washer; Pl,Pulley Gen | 1 |
C2-11-1 Electrical Equipment
| 16***74 | Adapter, Vacuum Sensor | 1 |
| 70***00 | Switch, Sender Tacho | 1 |
| 70***00 | Switch, Temperature Sender, M16 | 1 |
C2-3-13 Alternator
| 18***60 | Rectifier, Assembly | 1 |
| 18***50 | Pulley, Alternator, Pulley; Gen | 1 |
| 18***50 | Fan, Alternator | 1 |
C2-3-2 Alternator, 24.Volt
| 71***02 | Capacitor, Suppression | 1 |
| 71***09 | Kit-Screw & Washer | 1 |
| 71***21 | Kit-Sundry Parts | 1 |
C2-5-11 Motor, Starter
| 18***60 | Bracket, Bracket; Center Starter | 1 |
| 18***30 | Bracket; Center Rr Starter, Cover, Assembly, Centre | 1 |
| 18***10 | Cover Asm; Rr,Starter, Cover, Assembly | 1 |
C2-5-1 Motor, Starter, 24.Volt
| 71***00 | Motor, Starter 24.Volt | 1 |
| 71***01 | Armature | 1 |
| 71***02 | Bush | 1 |
C2-14-1 Alternator
| 18***50 | Pulley, Alternator, Pulley; Gen | 1 |
| 18***20 | Bolt, Bolt; Through,Gen | 4 |
| 18***40 | Nut, Nut; Pulley,Gen | 1 |
C2-3-12 Alternator
| 71***00 | Alternator, Assembly | 1 |
| 71***01 | Kit-Nut & Washer | 1 |
| 71***02 | Pulley, Alternator | 1 |
C2-3-1 Alternator, 24.Volt
| 71***02 | Capacitor, Suppression | 1 |
| 71***03 | Screw | 1 |
| 71***09 | Kit-Screw & Washer | 1 |
C2-1-11 Electrical Equipment
| 02***21 | Switch, Oil Indicator, Filter By-Pass | 1 |
| 33***08 | Cable, Stop Solenoid | 1 |
| 51***10 | Connector | 1 |
C2-13-2 Motor,Starter
| 33***54 | Relay, Anti-Engage Starter | 1 |
| 71***10 | Kit-Seal, Starter | 1 |
| 71***16 | Brush, (+)Starter | 1 |
C2-13-1 Motor,Starter
| 33***54 | Relay, Anti-Engage Starter | 1 |
| 71***25 | Spring, Brush | 4 |
| 71***31 | Washer | 1 |
C2-3-14 Alternator
| 71***00 | Alternator, Assembly | 1 |
| 71***01 | Kit-Nut & Washer | 1 |
| 71***02 | Pulley, Alternator | 1 |
C2-5-2 Motor, Starter, 24.Volt
| 71***00 | Motor, Starter 24.Volt | 1 |
| 71***05 | Stud | 2 |
| 71***08 | Washer, Spring | 2 |
C2-3-11 Alternator
| 18***20 | Stator, Assembly | 1 |
| 18***30 | Coil, Field, Assembly | 1 |
| 18***20 | Bracket, Front | 1 |
C2-6-11 Mountings & Fittings, Alternator & Starter
| 05***50 | Bolt; Gen Brkt; M10x25 W/Lk Washer, Bolt; Inj Pump Brkt; M10x25 W/Lk Washer, Bolt, Bolt; Inj Pump Brkt; M10x25, Bolt; Oil Pump; M10x25 W/Lk Washer, Bolt; Adj; M10x25 W/Lk Washer | 1 |
| 05***50 | Bolt; Gen Brkt; M10x35 W/Lk Washer, Bolt, M10 X 35, Bolt; Water Pump; M10x35 W/Lk Washer, Bolt; Eng Hanger, Bolt; Gen Brkt; M10x35 W/Lk & Washer | 2 |
| 10***31 | Bolt, Bolt; Gen; M14x135, Bolt, L=135, Bolt; M14 X 135, Bolt; M14 X 135 mm | 1 |
C2-4-1 Alternator Mountings, Yh Build
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-5-14 Motor,Starter
| 71***00 | Motor, Starter | 1 |
| 71***02 | Seal | 1 |
| 71***03 | Kit-Brush | 1 |
C2-5-13 Motor, Starter
| 18***20 | Kit-Brush (+), Brush; (+),Starter | 2 |
| 18***30 | Kit-Brush (-), Brush; (-),Starter | 2 |
| 18***40 | Spring; Brush Holder Starter, Spring, Brush | 4 |
C2-15-1 Mountings & Fittings, Alternator & Starter
| 02***84 | Bolt, Flange Head, M10 X 40 | 2 |
| 02***39 | Bolt, Flange Head, M10 X 35mm | 2 |
| 02***95 | Bolt, M10 X 25 | 1 |
C2-5-12 Motor, Starter
| 18***20 | Kit-Brush (+), Brush; (+),Starter | 2 |
| 18***30 | Kit-Brush (-), Brush; (-),Starter | 2 |
| 18***40 | Spring; Brush Holder Starter, Spring, Brush | 4 |
C3-4-2 Heater, Installation, Euro Cab
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 13***5Z | Screw, M10 X 20 | 8 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
C3-5-4 Heater Assembly, Euro Cab
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 12***49 | Clip, Outer Cable; Supercedes 69***80, San 13242 | 1 |
| 30***66 | Heater, Assembly Cab | 1 |
C3-11-1 Radio
| 13***3Z | Nut | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
| 71***00 | Radio, Cassette Unit, 12 Volt; Now Nla By Product Department - See Api 183 F, Or Replacement Details | 1 |
C3-10-1 Light, Hazard Warning, Germany Only
| JH***59 | Panel, Lamp | 1 |
| JH***61 | Harness, Hazard, Indicator | 1 |
| JH***60 | Bulb | 1 |
C3-4-3 Heater, Installation, Euro Cab, Air Conditioning
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 13***5Z | Screw, M10 X 20 | 8 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
C3-2-2 Switch Panels, Side Consoles
| 13***1Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 33***11 | Knob, Control; Replaced By 33***36, San 12731 | 1 |
C3-12-5 Air Conditioning, Condenser Assembly
| 69***84 | Accumulator | 1 |
| 69***85 | Switch, Binary | 1 |
| 69***86 | Clamp | 1 |
C3-8-1 Overload Warning, System
| 13***5Z | Screw | 1 |
| 13***1Z | Nut | 1 |
| 14***11 | Seal, Bonded | 1 |
C3-9-1 Light, Beacon, Hazard Warning, Amber
| 70***00 | Beacon, Magnetic 24 Volt, Amber | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***02 | Bulb, 24v 70w | 1 |
C3-5-5 Heater Assembly, Euro Cab, Air Conditioning
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 12***49 | Clip, Outer Cable; Supercedes 69***80, San 13242 | 1 |
| 30***60 | Evaporator, Assembly | 1 |
C3-12-1 Air Conditioning, Euro Cab
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Screw | 1 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
C3-5-3 Heater Assembly, Euro Cab, Air Conditioning
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 12***49 | Clip, Outer Cable; Supercedes 69***80, San 13242 | 3 |
| 30***60 | Evaporator, Assembly | 1 |
C3-2-1 Switch Panel, Console Box
| 33***80 | Panel | 1 |
| 70***16 | Switch, Actuator Rh | 1 |
| 70***17 | Switch, Actuator Lh | 1 |
C3-1-2 Right Hand Fascia, Control Monitor
| 32***34 | Vent, Heater Demister | 3 |
| 33***75 | Panel, Fascia Std | 1 |
| 33***89 | Cover, Plate, Switch | 1 |
C3-1-1 Gauge, System, Control Monitor
| 14***5Z | Washer, Spring, M5 | 6 |
| 60***3Z | Bolt | 6 |
| 82***92 | Washer; Replaces Khr1231, San 12455 | 6 |
C3-5-2 Heater Assembly, Euro Cab
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 12***49 | Clip, Outer Cable; Supercedes 69***80, San 13242 | 3 |
| 69***37 | Filter, 2ply | 1 |
D Controls-Machine, Engine & Steering
D1-1-1 Controls, Excavator
| 13***3Z | Screw | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 28 |
| 13***7Z | Capscrew | 8 |
D1-3-1 Control Pedal, Brake
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Screw | 4 |
D2-1-1 Controls, Throttle & Stop
| 13***7Z | Bolt; Replaces 60***7r | 3 |
| 13***5Z | Bolt, High Tensile | 2 |
| 13***8Z | Screw | 4 |
D2-1-11 Controls, Throttle & Stop
| 02***61 | Bracket, Throttle Reaction | 1 |
| 05***00 | Bolt; Oil Pipe, Bolt; Brkt, Bolt, Bolt; Brkt Fix; M10x20 W/Lk Washer | 2 |
| 13***5Z | Bolt, High Tensile | 2 |
D2-11-1 Controls, Throttle & Stop, Ams
| 13***3Z | Screw | 2 |
| 13***5Z | Screw | 2 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
D2-1-12 Controls, Throttle & Stop
| 02***61 | Bracket, Throttle Reaction | 1 |
| 13***9Z | Screw, Set | 2 |
| 13***1Z | Screw; Replaces 60***01,60***1r | 2 |
D3-1-1 Steering Column, Adjustable
| 13***7Z | Capscrew, Socket Head | 4 |
| 13***8Z | Capscrew | 4 |
| 14***1Z | Washer, M16 Plain | 1 |
D3-1-2 Steering Column, Adjustable
| 13***7Z | Capscrew, Socket Head | 4 |
| 14***1Z | Washer, M16 Plain | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
E Hydraulics & Air Including, Steering
E1-21-1 Circuit, Dipper & Bucket, Mono Boom
| 13***9Z | Bolt; Replaces 60***09 | 8 |
| 13***1Z | Nut | 8 |
| 13***9Z | Capscrew, M10 X 35mm | 4 |
E1-65-1 Circuit, Low Flow, 6.8m Boom, Material Handler
| 13***2D | Screw, M16 X 50lg | 8 |
| 13***3D | Bolt, M16 X 55mm | 16 |
| 14***1D | Washer, M16 | 24 |
E1-17-10 Circuit, Steering, Fig 2
| 13***5Z | Bolt, High Tensile | 4 |
| 13***5Z | Capscrew, M6 X 20 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 6 |
E1-7-1 Circuit, Traction, Lower Chassis
| 13***1Z | Capscrew | 8 |
| 13***2Z | Capscrew | 2 |
| 13***3Z | Capscrew | 6 |
E1-23-20 Circuit, Bucket Ram, 3.0m Dipper
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt | 1 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E1-48-3 Circuit, Boom Position Ram,, T.A.B Boom With Hbcv
| 14***11 | Seal, Bonded | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
| 16***52 | Adapter | 2 |
E1-17-1 Circuit, Steering, Fig 1
| 81***53 | Adapter | 2 |
| JL***37 | Hose, 3/8" X 1500; Replaces Jlv1138 And Jlv1139, Ref San09200 | 2 |
| JL***53 | Adapter, 3/8 X 3/8 | 2 |
E1-2-1 Circuit, Neutral Pressure
| 13***4Z | Bolt; Replaces 60***14 | 4 |
| 13***2Z | Capscrew | 4 |
| 14***0Z | Washer | 4 |
E1-45-20 Circuit, Dozer Ram, Chassis,, Front Blade And Rear Blade
| 13***4Z | Nut | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 16***53 | Adapter | 2 |
E1-24-11 Circuit, Boom Ram, With Hbcv, Monoboom
| 13***0D | Bolt | 4 |
| 13***4D | Bolt, M12 X 60 | 2 |
| 13***1D | Nut, M10 | 4 |
E1-67-1 Circuit, Dipper, 5m Gooseneck
| 13***2D | Screw, M16 X 50lg | 6 |
| 13***3D | Bolt, M16 X 55mm | 12 |
| 14***1D | Washer, M16 | 18 |
E1-14-10 Circuit, Brake Valve
| 13***3Z | Nut | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***1Z | Washer, M16 Plain | 4 |
E1-8-1 Circuit, Bypass, Hydraulic Filter
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 13***1Z | Nut, High Strength, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-43-2 Circuit, Dipper Ram, H.B.C.V., Assembly
| 13***0D | Bolt | 2 |
| 13***3D | Bolt | 1 |
| 13***1D | Nut | 2 |
E1-45-40 Circuit, Dozer Ram, Chassis, Front Blade, Rear Stabiliser
| 13***0Z | Bolt | 3 |
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***3Z | Bolt | 2 |
E1-66-1 Circuit, Auxiliary/Hammer, 4m Dipper Full Flow 6.8m Boom
| 13***3D | Bolt, M16 X 55mm | 8 |
| 13***8D | Bolt, M16 X 80mm | 4 |
| 14***1D | Washer, M16 | 12 |
E1-16-1 Circuit, Gear Change
| 13***5Z | Screw, M10 X 20 | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E1-63-1 Circuit, Grab Rotate, 5m Gooseneck Dipper, 6.8m Boom Materail Handler
| 13***4D | Bolt, M12 X 60 | 4 |
| 13***6D | Bolt, M16 X 70mm | 3 |
| 14***9D | Washer, M12 | 4 |
E1-4-1 Circuit, Traction Line
| 13***0Z | Capscrew, M12x40 | 16 |
| 13***8Z | Capscrew | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
E1-29-1 Circuit, Mainframe, Mono Boom
| 13***5D | Screw, Set | 4 |
| 13***5D | Bolt | 4 |
| 13***8D | Setscrew | 2 |
E1-33-3 Circuit, Auxiliary/Hammer, 3.00m Dipper Full Flow
| 13***7Z | Bolt; Replaces 60***17 | 2 |
| 13***9Z | Bolt; Replaces 60***19 | 2 |
| 14***26 | Washer, Seal | 1 |
E1-22-1 Circuit, Dipper Ram, Monoboom
| 13***0Z | Bolt | 2 |
| 13***3Z | Bolt; Replaces 60***3r,60***13 | 1 |
| 13***6Z | Bolt | 5 |
E1-43-10 Circuit, Dipper Ram, Without H.B.C.V.
| 13***0Z | Bolt | 2 |
| 13***3Z | Bolt; Replaces 60***3r,60***13 | 1 |
| 13***1Z | Nut, M12 | 2 |
E1-3-2 Circuit, Neutral, Return & Oil Cooler
| 13***8Z | Capscrew | 4 |
| 13***9Z | Capscrew, M10 X 35mm | 12 |
| 13***1Z | Capscrew | 4 |
E1-31-20 Circuit, Low Flow Line
| 14***11 | Seal, Bonded | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
E1-26-2 Circuit, Dipper Ram, Hbcv Feed & Return
| 13***8Z | Screw, M10x30; Replaces 60***8r | 2 |
| 13***3Z | Nut | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-24-1 Circuit, Boom Ram, None Hbcv
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***4Z | Bolt | 2 |
| 13***1Z | Nut, High Strength, M10 | 4 |
E1-34-10 Circuit, Low Flow, Mainframe
| 14***11 | Seal, Bonded | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
E1-34-1 Circuit, Low Flow, 2.4m Dipper
| 13***9Z | Bolt; Replaces 60***09 | 4 |
| 13***0Z | Bolt | 4 |
| 13***2Z | Bolt, M12x50 | 2 |
E1-25-1 Circuit, Boom Overload, Boom Hbcv
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 14***11 | Seal, Bonded | 5 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 3 |
E1-26-1 Circuit, Dipper Ram, Hbcv Feed & Return
| 13***8Z | Screw, M10x30; Replaces 60***8r | 2 |
| 13***3Z | Nut | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-19-1 Circuit, Motor Drain, Lower Chassis
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***3Z | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
E1-45-50 Circuit, Dozer Ram, Chassis Rear Blade, Front Stabiliser
| 13***0Z | Bolt | 5 |
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 2 |
E1-62-1 Circuit, Bucket Ram, 4m Dipper, 6.8m Boom Materail Handler
| 13***4D | Bolt, M12 X 60 | 4 |
| 13***6D | Bolt, M16 X 70mm | 3 |
| 14***9D | Washer, M12 | 4 |
E1-25-10 Circuit, Boom Overload, Boom And Dipper Hbcv
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 2 |
| 13***3Z | Nut | 1 |
E1-13-10 Circuit, Pilot Line, Hyd Raised Cab
| 13***5Z | Bolt, High Tensile | 2 |
| 14***11 | Seal, Bonded | 4 |
| 14***7Z | Washer, Spring | 2 |
E1-48-1 Circuit, Boom Position Ram,, T.A.B Boom Non Hbcv
| 17***VZ | Nut; Replaces 172r024vr,173r024vz & 173r024vz | 4 |
| 17***VZ | Nut; Replaced By 172r024vz, San 12088 | 4 |
| 60***0Z | Bolt | 2 |
E1-15-1 Circuit, Brakes, Lower Chassis
| 13***2Z | Bolt; Replaces 60***12 | 1 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut | 1 |
E1-8-10 Circuit, Bypass, Hydraulic Filter
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 13***1Z | Nut, High Strength, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-23-1 Circuit, Bucket Ram, 1.91m Dipper
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt | 1 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E1-6-1 Circuit, Swing
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***7Z | Capscrew | 2 |
| 13***8Z | Capscrew | 8 |
E1-31-1 Circuit, Hammer Control, Mainframe
| 13***5Z | Bolt, High Tensile | 4 |
| 14***11 | Seal, Bonded | 5 |
| 14***7Z | Washer, Spring | 4 |
E1-47-10 Circuit, Stabilisers, Front & Rear
| 13***0Z | Bolt | 6 |
| 13***4Z | Bolt | 10 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-18-1 Circuit, Axle Lock, Fig 1
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***3Z | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
E1-14-1 Circuit, Brake Valve
| 13***3Z | Nut | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***1Z | Washer, M16 Plain | 4 |
E1-64-1 Circuit, Auxiliary/Hammer, Full Flow. 6.8 Boom Material Handler
| 13***3D | Bolt, M16 X 55mm | 16 |
| 13***8D | Bolt, M16 X 80mm | 8 |
| 14***1D | Washer, M16 | 24 |
E1-3-1 Circuit, Neutral, Return & Oil Cooler
| 13***9Z | Bolt | 3 |
| 13***1Z | Nut, High Strength, M10 | 4 |
| 13***8Z | Capscrew | 4 |
E1-47-1 Circuit, Stabiliser, Mainframe
| 13***5Z | Bolt, High Tensile | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 13***7Z | Bolt | 2 |
E1-31-10 Circuit, Hammer Line, Mainframe
| 13***5Z | Bolt, High Tensile | 4 |
| 13***5Z | Screw, M10 X 20 | 2 |
| 14***29 | Seal, Dowty | 2 |
E1-1-1 Circuit, Pump Suction
| 13***0Z | Screw | 4 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 4 |
| 22***16 | Clip, Jubilee | 3 |
E1-14-20 Circuit, Brake Valve, Hyd Raised Cab
| 13***3Z | Nut | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***1Z | Washer, M16 Plain | 4 |
E1-35-1 Circuit, Test Points
| 14***08 | Seal, Washer | 3 |
| 14***11 | Seal, Bonded | 1 |
| 16***01 | Adapter | 3 |
E1-22-10 Circuit, Dipper Ram, Monoboom, With Hbcv
| 13***0Z | Bolt | 2 |
| 13***3Z | Bolt; Replaces 60***3r,60***13 | 1 |
| 13***6Z | Bolt | 5 |
E1-34-2 Circuit, Low Flow, 3.0m Dipper
| 13***9Z | Bolt; Replaces 60***09 | 4 |
| 13***0Z | Bolt | 4 |
| 13***2Z | Bolt, M12x50 | 2 |
E1-24-3 Circuit, Boom Ram, T.A.B Boom, Non Hbcv
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***4Z | Bolt | 2 |
| 13***1Z | Nut, High Strength, M10 | 4 |
E1-11-10 Circuit, Pilot Pressure, And Return Line Fig 2
| 13***0Z | Bolt | 2 |
| 13***5Z | Bolt, High Tensile | 6 |
| 13***5Z | Screw, M10 X 20 | 2 |
E1-11-1 Circuit, Pilot Pressure, And Return Line
| 13***5Z | Bolt, High Tensile | 14 |
| 13***5Z | Screw, M10 X 20 | 9 |
| 13***8Z | Bolt; Replaces Khj0716, San 14452 | 2 |
E1-4-10 Circuit, Traction, Upper Chassis, See Ti 11/087
| 13***0Z | Capscrew, M12x40 | 16 |
| 13***8Z | Capscrew | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
E1-21-5 Circuit, Dipper & Bucket, T.A.B Boom
| 13***4Z | Bolt; Replaces 60***4r | 3 |
| 13***9Z | Capscrew, M10 X 35mm | 4 |
| 13***0Z | Capscrew, M12x40 | 16 |
E1-24-10 Circuit, Boom Ram, With Hbcv, Monoboom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***4Z | Bolt | 2 |
| 13***1Z | Nut, High Strength, M10 | 4 |
E1-24-14 Circuit, Boom Ram, T.A.B Boom, With Hbcv
| 13***0D | Bolt | 4 |
| 13***4D | Bolt, M12 X 60 | 2 |
| 13***1D | Nut, M10 | 4 |
E1-30-1 Circuit, Mainframe, T.A.B
| 13***5Z | Bolt, High Tensile | 6 |
| 13***8Z | Capscrew | 8 |
| 14***11 | Seal, Bonded | 4 |
E1-45-1 Circuit, Dozer Ram, Mainframe
| 13***5Z | Bolt, High Tensile | 2 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 13***4Z | Screw, Cap | 2 |
E1-22-30 Circuit, Bucket Ram, Dipper Ram, T.A.B Upper & Lower Boom
| 13***4Z | Bolt | 2 |
| 13***4Z | Bolt | 6 |
| 13***6Z | Bolt | 4 |
E1-53-1 Circuit, Changeover, Bucket/Grab Low Flow
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***1Z | Bolt; Replaces 60***1r | 1 |
| 13***0Z | Capscrew | 16 |
E1-70-1 Circuit, Hyd Raised Cab
| 62***69 | Hose, 4200mm 1/4" 180/90 Deg. | 1 |
| 62***70 | Hose, 4400mm 1/4" 180/180 Deg. | 2 |
| 62***61 | Hose, 2800mm 3/8" 180/90 Deg. | 2 |
E1-60-1 Circuit, Dipper Ram, 6.8 Material Handler, Twin Arm Rams
| 13***8D | Screw, M16x30mm | 1 |
| 13***6D | Bolt.M14x70lg.10.9 P | 3 |
| 13***0D | Bolt, M16 X 100mm | 1 |
E1-61-1 Circuit, Dipper Ram, 6.8m Boom Right Hand, Materials Handler
| 13***0D | Bolt | 2 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***1D | Nut, M10 High Strength | 2 |
E1-17-20 Circuit, Steering, Fig 2, Hyd Raised Cab
| 13***5Z | Bolt, High Tensile | 4 |
| 13***5Z | Capscrew, M6 X 20 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 6 |
E1-13-1 Circuit, Pilot Line, Standard Build
| 13***5Z | Bolt, High Tensile | 2 |
| 14***11 | Seal, Bonded | 4 |
| 14***7Z | Washer, Spring | 2 |
E1-61-10 Circuit, Dipper Ram, 6.8m Boom Left Hand, Materials Hanler
| 13***0D | Bolt | 2 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***1D | Nut, M10 High Strength | 2 |
E1-47-20 Circuit, Stabiliser, Rear
| 13***0Z | Bolt | 3 |
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***7Z | Bolt | 2 |
E1-43-1 Circuit, Dipper Ram, H.B.C.V., Assembly
| 13***0Z | Bolt | 2 |
| 13***3Z | Bolt; Replaces 60***3r,60***13 | 1 |
| 13***1Z | Nut, M12 | 2 |
E1-5-1 Circuit, Load Sense Line
| 14***11 | Seal, Bonded | 3 |
| 16***02 | Adapter | 1 |
| 16***50 | Adapter | 1 |
E1-33-2 Circuit, Auxiliary/Hammer, 2.40m Dipper Full Flow
| 13***7Z | Bolt; Replaces 60***17 | 2 |
| 13***9Z | Bolt; Replaces 60***19 | 2 |
| 14***26 | Washer, Seal | 1 |
E1-20-1 Circuit, Boom Ram, Mainframe
| 13***5Z | Bolt; Replaces 60***5r | 2 |
| 13***1Z | Nut, M12 | 2 |
| 13***0Z | Capscrew, M12x40 | 8 |
E1-46-1 Circuit, Dozer/Stab, Mainframe
| 13***7Z | Bolt | 2 |
| 13***4Z | Screw, Cap | 2 |
| 13***8Z | Capscrew | 8 |
E1-24-13 Circuit, Boom Ram, T.A.B Boom, With Hbcv
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***4Z | Bolt | 2 |
| 13***1Z | Nut, High Strength, M10 | 4 |
E1-10-1 Circuit, Drain, Motor & Solenoid
| 13***5Z | Screw, M10 X 20 | 4 |
| 13***6Z | Bolt; Replaces 60***16 | 2 |
| 81***34 | Adapter | 1 |
E1-32-1 Circuit, Auxiliary/Hammer, Boom Line
| 13***2Z | Bolt; Replaces 60***2r | 8 |
| 13***5Z | Bolt | 2 |
| 13***7Z | Bolt; Replaces 60***17 | 3 |
E1-33-1 Circuit, Auxiliary/Hammer, 1.91m Dipper Full Flow
| 13***7Z | Bolt; Replaces 60***17 | 2 |
| 13***9Z | Bolt; Replaces 60***19 | 2 |
| 14***26 | Washer, Seal | 1 |
E1-23-10 Circuit, Bucket Ram, 2.4m Dipper
| 13***4Z | Bolt; Replaces 60***14 | 4 |
| 13***6Z | Bolt | 1 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E2-1-3 Valve, Regulator
| 13***6Z | Screw | 2 |
| 20***74 | Valve, Regulator Assembly | 1 |
| 72***17 | Connector | 1 |
E2-1-2 Pump, Piston, Main Hydraulic, Drive Groups
| 20***74 | Valve, Regulator Assembly | 1 |
| 20***35 | Kit-Seal, Hydraulic Pump | 1 |
| 33***53 | Pump, Gear | 1 |
E2-7-1 Motor, Swing
| 13***14 | Capscrew | 4 |
| 60***14 | Capscrew; Replaced By 13***14, See San 21053 | 4 |
| 82***29 | O Ring, To Suit 187.4 Groove; Ref. Andrew Riley-Wrexham I/D=183.75, Replaces Lbq5263 San 12275 | 2 |
E2-1-5 Pump, Piston, Main Hydraulic, Drive Groups
| 13***8Z | Screw, M10x30; Replaces 60***8r | 9 |
| 13***2Z | Capscrew | 12 |
| 33***07 | Spacer, Ring | 1 |
E2-6-1 Motor, Drive
| 13***0Z | Capscrew | 4 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 4 |
| 20***72 | Valve, Relief | 2 |
E2-1-1 Pump, Piston, Main Hydraulic, Drive Groups
| 13***8Z | Screw, M10x30; Replaces 60***8r | 9 |
| JH***46 | Washer, M10; Replaces Khj0183 | 9 |
| JR***15 | Pump, Main Hydraulic | 1 |
E2-6-2 Valve, Counterbalance
| 92***29 | Valve, Counterbalance | 1 |
| 99***34 | Kit-Seal, Counterbalance Valve | 1 |
E3-2-17 Valve, 9 Station Solenoid
| 25***20 | Valve, Check Cartrid | 2 |
| 25***21 | Kit-Seal | 1 |
| 25***44 | Valve, 9 Station Solenoid | 1 |
E3-14-1 Coupling, Rotary
| 69***00 | Pin, Grooved | 1 |
| 69***01 | Adapter | 1 |
| 69***02 | Distributor, Assembly | 1 |
E3-16-10 Filter, Hydraulic, Steer Circuit
| 32***02 | Kit-Seal, Filter | 1 |
| 69***84 | Element, Steer Filter, C/W Seal | 1 |
| JL***32 | Filter, Steer | 1 |
E3-40-1 Valve, Steering
| JR***46 | Valve, Steer | 1 |
E3-2-3 Valve, Flow Limiter
| 25***17 | Valve, Flow Limiter | 1 |
| 99***23 | Kit, Seal | 1 |
E3-15-3 Lubricants & Filters
| 02***01 | Element, Fuel Filter, Cartridge | 1 |
| 02***26 | Element, Oil Filter, Main, Spin-On | 2 |
| 32***02 | Element, Oil Filter, By-Pass, Spin-On | 1 |
E3-2-1 Valve, Control, Components
| 13***3Z | Screw, M6x16 | 24 |
| 13***8Z | Screw | 3 |
| 14***9Z | Washer | 4 |
E3-15-4 Lubricants & Filters
| 02***81 | Element, Oil Filter, Cartridge, Element, Oil Filter, Cartridge; M/C'S Fitted With Tier 2 Engines See Footnote. M/C With T2 Engines M703785-70***87,70***90-70***93,70***95,70***96,70***23,70***25 & 70***28. | 2 |
| 32***03 | Strainer, Gauze | 1 |
| 32***40 | Element, Filter Bypass, Plexus | 1 |
E3-2-12 Valve
| 25***16 | Valve | 1 |
| 99***22 | Kit, Seal; Supplier Changed Number From 00***64 | 1 |
E3-1-1 Valve, Assembly, & Mounting, Mono Boom
| 13***0Z | Screw | 3 |
| 13***0Z | Capscrew, M12x40 | 8 |
| 14***1Z | Washer, M16 Plain | 3 |
E3-18-1 Valve, Transmission Control
| 14***08 | Seal, Washer | 1 |
| 20***46 | Cartridge, Pressure Reducing | 1 |
| 20***47 | Cartridge, Pressure Relief | 1 |
E3-2-7 Valve, Throttle Check
| 25***18 | Valve, Throttle Check | 1 |
| 82***28 | O Ring | 1 |
E3-2-9 Valve, Anti-Cavitation
| 25***15 | Valve, Anti Cavitation | 2 |
| 99***20 | Kit, Seal | 1 |
| 99***21 | Kit, Seal | 1 |
E3-50-1 Valve, Brake Control
| 13***8Z | Capscrew | 3 |
| JR***45 | Valve, Assembly, Brake | 1 |
E3-1-2 Valve, Assembly, & Mounting, T.A.B Boom
| 13***0Z | Screw | 3 |
| 13***0Z | Capscrew, M12x40 | 8 |
| 14***1Z | Washer, M16 Plain | 3 |
E3-17-2 Valve, Swing Brake
| 25***02 | Kit-Seal | 1 |
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 2 |
E3-51-1 Valve, Forward/Reverse
| 25***06 | Assembly, Incl.Plunger Seals | 1 |
| 25***11 | Kit, Seal | 1 |
| JR***51 | Valve, Foot Control | 1 |
E3-2-10 Valve, Combined Relief, Anti-Cavitation Pilot Operated
| 25***14 | Valve, Combined Relief, Anti Cavitation | 7 |
| 99***20 | Kit, Seal | 1 |
E3-2-8 Screw, Locking
| 82***76 | Screw, Locking | 2 |
| 99***24 | Kit, Seal | 1 |
E3-15-1 Lubricants & Filters
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***01 | Element, Fuel Filter, Canister Type | 2 |
| 32***40 | Element, Filter Bypass, Plexus | 1 |
E3-2-15 Valve, 9 Station Solenoid
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 25***20 | Valve, Check Cartrid | 2 |
E3-2-11 Valve, Throttle Check
| 25***13 | Valve, Throttle Check | 1 |
| 82***27 | O Ring | 1 |
E3-2-4 Compensator, Pressure
| 25***20 | Valve, Pressure Compensator | 1 |
| 99***26 | Kit, Seal | 1 |
E3-6-1 Valve, Hand Control, Servo
| 16***03 | Adapter | 10 |
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 10 |
| 25***00 | Valve, Servo Control | 2 |
E3-25-1 Valve, Low Flow
| 13***16 | Bolt | 3 |
| 14***09 | Washer, M12, Plain | 3 |
| 25***20 | Coil, Solenoid Valve | 1 |
E3-17-1 Valve, Swing Brake
| 10***01 | Capscrew, M4 X 10 | 4 |
| 25***24 | Valve, Swing Break | 1 |
| KH***27 | Valve, Assembly; Replaced By 25/22***24, See San 12239 | 1 |
E3-14-10 Mountings, Rotary Coupling
| 13***5Z | Screw, M12x20; Replaces 60***5r | 6 |
| 13***2Z | Bolt; Replaces 60***2r | 5 |
| 13***3Z | Nut, M16 | 3 |
E3-17-3 Valve, Swing Brake
| 25***02 | Kit-Seal | 1 |
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 2 |
E3-15-2 Oils, Biodegradable, Hydraulic
| 40***23 | Fluid, Hydraulic, 25 Litres, Biodegradable, Fluid, Hydraulic, 25 Litres, Biodegradable; See Note 1. Use Up To Maximum Of 40 Degrees Centigrade Ambient Temperature. | 1 |
| 40***24 | Fluid, Hydraulic 205 Litres, Biodegradable | 1 |
E3-2-2 Valve, Assembly
| 25***29 | Valve, Assembly | 1 |
| 25***32 | Cover | 1 |
| 25***52 | Valve, Throttle | 1 |
E3-2-5 Compensator, Pressure
| 25***21 | Valve, Pressure Compensator | 5 |
| 99***26 | Kit, Seal | 1 |
E3-33-1 Valve, Logic, 4 Stabiliser
| 13***0Z | Capscrew | 12 |
| 25***01 | Cartridge, Relief Valve | 2 |
| 25***02 | Plug, Blanking | 1 |
E3-2-16 Valve, Dual Solenoid
| 25***33 | Kit, Seal | 1 |
| 25***37 | Valve, Dual Solenoid | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 2 |
E3-16-1 Filter, Hydraulic, Auxiliary Circuit
| 69***51 | Element, Filter | 1 |
| 69***41 | Kit-Seal, Filter | 1 |
| 92***40 | Valve, Visual Indicator; Replaces 32/90***03, San 13920 | 1 |
E3-2-6 Valve, Pressure Relief
| 25***19 | Valve, Pressure Relief | 1 |
| 99***25 | Kit, Seal | 1 |
E4-2-1 Ram, Dipper
| 69***26 | Cylinder, Tube, Assembly; Replaced By 69***55. | 1 |
| 69***27 | Bush, Pin; Replaces Lku0075 | 2 |
| 69***28 | Wiper, Pin, Bushing | 4 |
E4-6-1 Ram, Axle Lock
| 90***29 | Rod | 1 |
| 99***17 | Kit, Seal | 1 |
| JR***63 | Ram, Axle Lock | 1 |
E4-2-2 Ram, Dipper
| 13***18 | Capscrew | 16 |
| 32***12 | Plug | 1 |
| 33***89 | Ram, Dipper | 1 |
E4-13-1 Seal Kit, 65mm Rod X 120mm Cyl, Stabiliser Ram
| 23***07 | O Ring | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
| 24***09 | Seal, Gland, 65mm Rod | 1 |
E4-1-5 Ram, Boom, T.A.B Boom
| 33***43 | Piston, Boom Ram, 12***mm | 1 |
| 33***65 | Cushion, Ring | 1 |
| 33***49 | Pin Bushing; Replaces Lku0119 | 1 |
E4-4-2 Ram, Dozer, Left Hand
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***22 | Spacer | 1 |
| 25***29 | Piston, Pilot, Sway Ram Noise | 1 |
E4-3-5 Ram, Bucket, Pipework
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***1Z | Bolt; Replaces 60***1r | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-1-6 Ram, Boom, T.A.B Boom
| 13***18 | Capscrew | 14 |
| 33***37 | Ram, Boom, Tab Hbcv | 2 |
| 69***23 | Nipple, Grease | 1 |
E4-9-2 Ram, Stabiliser
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 25***00 | Cartridge | 2 |
| 25***02 | Kit-Seal; 3 O Rings And 2 Quad Rings | 1 |
E4-4-1 Ram, Dozer, Left Hand
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***22 | Spacer | 1 |
| 25***01 | Kit-Seal, Pilot Piston; 2 O Rings, 1 Quad Ring And 1 Backup Ring | 2 |
E4-3-1 Ram, Bucket
| 69***23 | Nipple, Grease | 2 |
| 69***47 | Screw, Set; Part Made N.L.A By Supplier, Ref San10755 | 1 |
| 69***48 | Ball, Steel; Part Made N.L.A By Supplier, Ref San10755 | 1 |
E4-7-1 Ram, Position,, Assembly,, T.A.B Boom Non Hbcv
| 13***1Z | Bolt | 2 |
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-2-20 Ram, Dipper, 6.8m Boom, Material Handler
| 33***28 | Ram, Boom Use With Hbcv | 2 |
| 33***52 | Ram, Boom, Js175w Auto Mono | 2 |
| 81***75 | Seal | 2 |
E4-1-1 Ram, Boom, Mono Boom
| 33***43 | Piston, Boom Ram, 12***mm | 1 |
| 33***65 | Cushion, Ring | 1 |
| 33***49 | Pin Bushing; Replaces Lku0119 | 1 |
E4-7-20 Ram, Position,, Components,, T.A.B Boom
| 33***99 | Ram, Assembly, Position | 1 |
| 90***20 | Seal, Kit | 1 |
| 90***22 | Cylinder | 1 |
E4-4-11 Ram, Dozer, Right Hand
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***22 | Spacer | 1 |
| 25***29 | Piston, Pilot, Sway Ram Noise | 1 |
E4-9-1 Ram, Stabiliser
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 25***00 | Cartridge | 2 |
| 25***02 | Kit-Seal; 3 O Rings And 2 Quad Rings | 1 |
E4-4-10 Ram, Dozer, Right Hand
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***22 | Spacer | 1 |
| 25***01 | Kit-Seal, Pilot Piston; 2 O Rings, 1 Quad Ring And 1 Backup Ring | 2 |
E4-7-5 Ram, Position,, Assembly,, T.A.B Boom With Hbcv
| 13***1Z | Bolt | 2 |
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-3-2 Ram, Bucket
| 13***8Z | Bolt, M10 X 30 Long | 2 |
| 13***1Z | Nut, High Strength, M10 | 2 |
| 13***0D | Capscrew, M10 X 40 | 4 |
F Axles, Wheels & Transmission
F1-1-1 Axle Assembly, Front, Jra0361
| 10***97 | Seal, Shaft | 2 |
| 10***98 | Casing, Axle | 1 |
| 10***99 | Bearing, Bush | 2 |
F1-16-1 Ram, Steering, Group, 10/300889
| 82***97 | Screw | 8 |
| 82***98 | Screw | 4 |
| 82***34 | O Ring | 2 |
F1-7-1 Hub & Brakes, Group, Jra0361
| 04***90 | O Ring | 2 |
| 10***08 | Seal, Shaft | 2 |
| 10***09 | Hub | 2 |
F1-10-1 Axle Assembly, Front, 10/300889
| 10***97 | Seal, Shaft | 2 |
| 10***98 | Casing, Axle | 1 |
| 10***99 | Bearing, Bush | 2 |
F1-5-1 Knuckle, Steering, Group, Jra0361
| 04***51 | Cap, Sealing | 4 |
| 10***02 | Bearing, Roller | 4 |
| 10***72 | Housing, Axle Hub Joint, Left Hand | 1 |
F1-12-1 Crown Wheel & Pinion, Group, 10/300889
| 10***00 | Differential, Assembly | 1 |
| 10***01 | Housing, Differential | 1 |
| 10***02 | Bearing, Roller | 1 |
F1-14-1 Coupling, Half Shaft, 10/300889
| 33***84 | Joint, Universal Shaft, Assembly | 1 |
| 33***85 | Joint, Centre | 1 |
| 33***87 | Kit-Spider | 2 |
F1-3-1 Differential, Group, Jra0361
| 10***64 | Casing, Assembly, Differential | 1 |
| 10***65 | Gear, Axle Bevel | 2 |
| 10***66 | Washer, Thrust | 2 |
F1-15-1 Hub & Brakes, Group, 10/300889
| 10***08 | Seal, Shaft | 2 |
| 10***09 | Hub | 2 |
| 10***11 | Ring, Support | 2 |
F1-8-1 Ram, Steering, Group, Jra0361
| 82***97 | Screw | 8 |
| 82***98 | Screw | 4 |
| 82***34 | O Ring | 2 |
F1-11-1 Differential, Group, 10/300889
| 10***64 | Casing, Assembly, Differential | 1 |
| 10***65 | Gear, Axle Bevel | 2 |
| 10***66 | Washer, Thrust | 2 |
F1-13-1 Knuckle, Steering, Group, 10/300889
| 04***51 | Cap, Sealing | 4 |
| 10***02 | Bearing, Roller | 4 |
| 10***74 | Cap, Bearing Sealing | 4 |
F1-6-1 Coupling, Half Shaft, Jra0361
| 33***84 | Joint, Universal Shaft, Assembly | 1 |
| 33***85 | Joint, Centre | 1 |
| 33***87 | Kit-Spider | 2 |
F1-4-1 Crown Wheel & Pinion, Group, Jra0361
| 10***00 | Differential, Assembly | 1 |
| 10***01 | Housing, Differential | 1 |
| 10***02 | Bearing, Roller | 1 |
F2-6-1 Differential, Group
| 10***64 | Casing, Assembly, Differential | 1 |
| 10***65 | Gear, Axle Bevel | 2 |
| 10***66 | Washer, Thrust | 2 |
F2-10-20 Hub & Carrier, 10/300890
| 10***18 | Bush, S=26,8 | 2 |
| 10***21 | Bush, S=26,23 | 2 |
| 10***22 | Bush, S=26,26 | 2 |
F2-10-1 Axle Assembly, Rear, 10/300890
| 10***90 | Axle, Assaembly, Rear | 1 |
| 13***2Z | Bolt, M24x240 | 8 |
| 13***3Z | Nut, Self Locking | 8 |
F2-10-50 Differential, Grup, 10/300890
| 10***64 | Casing, Assembly, Differential | 1 |
| 10***65 | Gear, Axle Bevel | 2 |
| 10***66 | Washer, Thrust | 2 |
F2-10-40 Differential, Carrier Group, 10/300890
| 10***02 | Bearing, Roller | 1 |
| 10***03 | Bearing, Roller | 1 |
| 10***04 | Bearing, Roller | 1 |
F2-10-10 Axle Casing, Half Shaft, 10/300890
| 10***46 | Casing, Axle | 1 |
| 10***71 | O Ring | 2 |
| 10***61 | Shaft, Half | 2 |
F2-4-1 Hub & Brakes, Group
| 04***90 | O Ring | 2 |
| 10***08 | Seal, Shaft | 2 |
| 10***09 | Hub | 2 |
F2-2-1 Axle Casing, Group
| 04***90 | O Ring | 2 |
| 10***46 | Casing, Axle | 1 |
| 10***47 | Shaft, Half | 2 |
F2-5-1 Differential, Carrier Group
| 10***02 | Bearing, Roller | 1 |
| 10***03 | Bearing, Roller | 1 |
| 10***04 | Bearing, Roller | 1 |
F2-10-30 Brake Assembly, 10/300890
| 10***84 | Brake, Assembly Kit | 2 |
| 10***85 | Plate, Brake Anchor | 1 |
| 10***86 | Cylinder, Wheel | 1 |
F2-3-1 Hub Carrier, Group
| 10***90 | Adapter, Neck Screw | 2 |
| 10***48 | Carrier, Hub | 2 |
| 10***49 | Plate, Carrier Support | 2 |
F2-1-1 Axle Assembly, Rear
| 13***2Z | Bolt, M24x240 | 8 |
| 13***3Z | Nut, Self Locking | 8 |
| JR***62 | Axle, Assembly, Rear | 1 |
F3-2-1 Wheels & Tyres, Singles
| 10***21 | Washer | 40 |
| 10***22 | Nut | 40 |
| 82***41 | Washer, Centering | 40 |
F3-1-1 Propshafts, Transmission
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 32 |
| 17***YZ | Nut | 32 |
| 69***03 | Flange, Yoke | 2 |
F3-3-1 Wheels & Tyres, Duals
| 10***21 | Washer | 40 |
| 10***22 | Nut | 40 |
| 82***41 | Washer, Centering | 40 |
F3-4-1 Wheels & Solid Tyres, Duals
| 10***21 | Washer | 40 |
| 10***22 | Nut | 40 |
| 21***39 | G.A, Solid Tyres | 1 |
F4-4-1 Gearbox, Swing
| 05***21 | Gear, Reduction Assembly | 1 |
| 05***22 | Gear, Sun | 1 |
| 05***61 | O Ring | 2 |
F4-5-1 Circuit, Swing Ring Greasing
| 13***1Z | Screw; Replaces 60***01,60***1r | 2 |
| 14***6Z | Washer, Spring | 2 |
| JH***37 | Nipple, Grease, Straight | 3 |
F4-3-1 Motor, Swing
| 13***7Z | Screw, M12x30; Replaces 60***07 | 3 |
| 13***5Z | Bolt | 36 |
| 13***7Z | Bolt | 11 |
F5-6-1 Gearbox Clutch Disc, Group
| 10***58 | Piston | 1 |
| 10***59 | Spring, Cup | 1 |
| 10***60 | Gear, Disc Carrier | 1 |
F5-4-1 Gearbox, Input Housing, Group
| 04***20 | Housing, Input | 1 |
| 04***73 | Plug | 1 |
| 10***44 | O Ring | 1 |
F5-8-1 Gearbox Planet Drive, Group
| 10***89 | Circlip | 3 |
| 10***90 | Washer, A=3,0 | 0 |
| 10***92 | Washer, A=3,15 | 0 |
F5-12-1 Gearbox Output, Group
| 04***01 | Plate, Oil | 1 |
| 04***02 | Cover | 1 |
| 04***03 | Gear, Helical | 1 |
F5-9-1 Gearbox Disconnect, Group
| 04***22 | Bolt | 1 |
| 10***08 | Gear, Selector, Fixed | 1 |
| 10***09 | Circlip | 1 |
F5-2-1 Gearbox Housing, Group
| 04***40 | Tube, Suction | 1 |
| 04***73 | Plug | 2 |
| 04***94 | Ring, Seal; Superseded By 10/90***06 See San 20236 | 2 |
F5-5-1 Gearbox Input Shaft, Group
| 04***21 | Shaft, Input | 1 |
| 10***60 | Circlip | 1 |
| 10***08 | Ring, Piston | 2 |
F5-1-1 Transmission, Powershift
| 13***1Z | Bolt, M16x45mm | 5 |
| 13***1Z | Bolt | 3 |
| 33***59 | Guard, Transmission | 1 |
F5-7-1 Gearbox Brake Disc, Group
| 04***60 | Piston | 1 |
| 04***61 | Washer | 1 |
| 04***62 | Shim, End | 1 |
F5-3-1 Gearbox Oil Pipes, Group
| 10***44 | O Ring | 1 |
| 10***54 | O Ring | 1 |
| 10***55 | Bolt, Banjo | 1 |
F5-10-1 Gearbox Drive Gear, Group
| 04***00 | Plate, Screen | 1 |
| 10***91 | Circlip | 1 |
| 10***80 | Circlip | 1 |
F5-11-1 Gearbox Gearshift, Sensor Group
| 04***80 | Valve, Pressure Reducing | 1 |
| 04***22 | Plug | 1 |
| 10***51 | Gasket; Was 0501-312-883 D.Jackson 23/04/07 | 1 |
K Engine 6bg1tqb04 Low Emission, Tier 1
K1-6-2 Camshaft & Gears
| 01***50 | Bolt; Spindle To Thrust Plate; M10x55, Bolt, Bolt; Spindle To Thrust Plate | 2 |
| 02***09 | Washer, Cam | 1 |
| 02***31 | Camshaft | 1 |
K1-1-1 Engine, Complete
| 21***71 | Engine, Complete, 6bg1, Turbocharged | 1 |
| JR***30 | Engine, Complete, Turbocharged | 1 |
K1-7-1 Flywheel & Housing
| 02***32 | Housing, Flywheel | 1 |
| 02***33 | Flywheel, Assembly | 1 |
| 02***34 | Gear, Ring | 1 |
K1-6-1 Timing Case
| 02***54 | Cover, Inspection | 2 |
| 02***22 | Gasket, Timing Case | 1 |
| 02***29 | Gasket, Timing Cover | 1 |
K1-8-1 Engine Mountings
| 13***4Z | Bolt | 2 |
| 13***1Z | Bolt, M16 X 220 | 2 |
| 16***VZ | Nut, High Strength | 8 |
K1-3-1 Block Assembly
| 02***05 | Cover, Tappet | 2 |
| 02***12 | Dowel | 1 |
| 02***13 | Pin, D=10 X L=50 | 1 |
K1-5-1 Fans, Pulleys, & Fan Belt
| 02***24 | Pulley, Water Pump | 1 |
| 02***26 | Fan, Cooling | 1 |
| 02***27 | Bolt | 4 |
K1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***04 | Kit-Piston Ring, Standard | 6 |
| 02***05 | Pin, Gudgeon | 6 |
| 02***06 | Bush, Small End | 6 |
K2-1-1 Cylinder Head
| 02***55 | Guide Valve Inlet & | 12 |
| 02***12 | Gasket, Cylinder Head | 1 |
| 10***00 | Bolt; Cyl Hd To Hsg; M12x100, Bolt, M12x100 | 6 |
K2-3-1 Rocker Cover
| 02***15 | Cover, Rocker | 1 |
| 02***36 | Label, Caution | 1 |
| 10***20 | Bush, Rubber, Packing | 1 |
K2-2-1 Rocker Assembly, Inlet/Exhaust Valves, Push Rods & Tappets
| 02***82 | Seat, Valve Spring, Upper | 12 |
| 02***83 | Collar, Split, 13.3mm | 24 |
| 02***35 | Spring, Valve | 12 |
K2-4-1 Lifting Plates, Engine
| 02***50 | Bolt; Eng Hanger; M14x25, Bolt, Bolt; Eng Hanger, Bolt; M14 X 25 | 1 |
| 05***20 | Bolt; Eng Hanger, Bolt, Bolt; Eng Hanger; M10x22 W/Lk Washer | 3 |
| 51***10 | Bracket, Lifting, Front | 1 |
K3-3-2 Filter, Air, Heavy Duty
| 13***3Z | Screw | 2 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 6 |
| 14***6Z | Washer, M6 | 2 |
K3-2-1 Manifold, Exhaust
| 02***89 | Stud, L1=85 | 1 |
| 02***42 | Manifold, Exhaust | 1 |
| 02***43 | Gasket | 6 |
K3-4-1 Exhaust System
| 02***44 | Gasket | 1 |
| 13***9Z | Bolt; Replaces 60***09 | 3 |
| 13***1Z | Nut | 8 |
K3-3-1 Filter, Air
| 13***3Z | Screw | 1 |
| 13***9Z | Bolt; Replaces 60***09 | 2 |
| 14***6Z | Washer, M6 | 1 |
K3-1-1 Manifold, Induction
| 02***18 | Pipe, Air Inlet | 1 |
| 02***37 | Manifold, Induction | 1 |
| 02***38 | Stud | 2 |
K4-3-1 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 10 |
| 13***3Z | Bolt, M10 X 16 | 6 |
| 13***2Z | Screw | 4 |
K4-4-1 Radiator, Hoses & Fittings
| 13***8Z | Screw | 1 |
| 22***01 | Clip, Jubilee | 2 |
| 22***12 | Clip, Jubilee | 4 |
K4-1-1 Pump, Water
| 02***11 | Bolt, M10 X 75 | 2 |
| 02***41 | Gasket | 1 |
| 02***00 | Pump, Water | 1 |
K4-2-1 Thermostat, Housing, Inlet & Outlet
| 01***50 | Bolt; Hsg To Hd; M10x95, Bolt | 3 |
| 02***92 | Thermostat | 1 |
| 02***94 | Hose, By-Pass | 1 |
K5-1-1 Sump, Oil, & Fittings
| 02***92 | Sump, Assembly | 1 |
| 02***93 | Dipstick, Assembly | 1 |
| 02***47 | Gasket, Oil Sump | 1 |
K5-5-1 Cooler, Oil
| 02***51 | Gasket | 1 |
| 02***35 | Cooler, Oil,Assembly | 1 |
| 02***37 | Body, Cooler | 1 |
K5-4-1 Filter, Oil
| 02***16 | Filter, Oil Assembly | 1 |
| 02***19 | Head, Oil Filter, Assembly | 1 |
| 02***21 | Switch, Oil Indicator, Filter By-Pass | 1 |
K5-6-1 Pipes, Oil
| 02***20 | Pipe, Lube Oil To Inj/Pump | 1 |
| 02***55 | Pipe, Lube Oil, Inj. Pump | 1 |
| 05***00 | Bolt; Oil Pipe,Oil Pump To C/Bl; M8x40 W/Lk Washer, Bolt, Bolt; Oil Pipe, Bolt; Oil Pipe; M8x40 W/Lk Washer | 8 |
K5-3-1 Piston Cooling Jets
| 02***50 | Jet, Piston Cooling | 6 |
| 11***20 | Valve; Check,Oil, Valve, Check, Assembly, Flow Control Hydraulic. Valve | 6 |
K5-2-1 Pump, Oil
| 02***55 | Strainer, Oil Suction | 1 |
| 02***49 | Pump, Oil, Assembly | 1 |
| 05***50 | Bolt; Gen Brkt; M10x25 W/Lk Washer, Bolt; Inj Pump Brkt; M10x25 W/Lk Washer, Bolt, Bolt; Inj Pump Brkt; M10x25, Bolt; Oil Pump; M10x25 W/Lk Washer, Bolt; Adj; M10x25 W/Lk Washer | 2 |
K6-6-1 Filter, Fuel Sediment
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***07 | Washer, Locking | 1 |
K6-1-1 Pump, Fuel Injection, Installation
| 02***15 | Gasket, Inj/Pump To T/Case | 1 |
| 02***03 | Bolt | 7 |
| 02***04 | Bracket | 1 |
K6-8-3 Pump, Fuel Lift
| 10***60 | Bolt; Eye,Fuel Pipe; M14x27, Bolt; Joint,Fuel Filter; M14x27 Flange, Bolt, Banjo, M14 X 27, Bolt; Joint,Oil Pipe; M14x27, Bolt; Eye,Fuel Filter, Bolt; Joint,Fuel Filter; M14x27, Bolt; Eye,Fuel Pipe; M14x27 Flange, Bolt; Eye,Fuel Filter; M14x27 Flange, Bolt, Bolt; Eye,Oil Pipe; M14x27 Flange, Bolt; Eye,Fuel Filter; M14x27 | 1 |
| 11***30 | Adapter Fitting, Adapter, Check, Valve, Adapter; Eye Bolt,Fuel Feed Pump | 1 |
| 11***10 | Bolt; Eye,Fuel Inl,Inj Pump, Bolt; Eye,Oil Return,Inj Pump, Bolt, Banjo, Bolt; Eye,Fuel Outlet,Feed Pump, Valve; Overflow,Inj Pump | 1 |
K6-7-1 Filter, Fuel
| 02***01 | Element, Fuel Filter, Cartridge | 1 |
| 02***97 | Filter, Assembly, Fuel | 1 |
| 11***80 | Head, Fuel Filter | 1 |
K6-1-30 Drive Coupling, Fuel Injection Pump
| 11***90 | Coupling | 1 |
| 11***30 | Bolt | 2 |
| 11***50 | Bolt | 1 |
K6-1-2 Pump, Fuel Injection, Governor,Fuel Pump, Service Parts
| 10***30 | O-Ring, Gasket; Fuel Feed Pump,Inj Pump, O Ring, O-Ring; (Sub For Gv10976) | 1 |
| 11***30 | Screw, Screw; Cover To Hsg | 2 |
| 11***20 | Eyebolt, Bolt, Banjo, Bolt; Eye,Oil Feed,Inj Pump | 1 |
K6-1-20 Governor Assembly, Fuel Injection Pump
| 11***70 | Kit-Weight Adjuster, Flyweight Asm; Gov | 1 |
| 11***20 | Spring, Spring; Spd Cont Lever,Gov | 1 |
| 11***40 | Spring, Capsule, Spring Capsule; Adj,Gov | 1 |
K6-1-10 Pump, Fuel Injection
| 10***30 | O-Ring, Gasket; Fuel Feed Pump,Inj Pump, O Ring, O-Ring; (Sub For Gv10976) | 1 |
| 11***40 | Housing, Housing, Pump, Housing; Pump,Fuel Inj | 1 |
| 11***00 | Cover; Hsg,Inj Pump, Cover, Housing, Cover | 1 |
K6-2-1 Fuel System
| 02***38 | Clip | 6 |
| 02***74 | Valve | 1 |
| 02***41 | Pipe, Sedimentor To L/Pump | 1 |
K6-8-1 Pump, Fuel Lift
| 10***60 | Bolt; Eye,Fuel Pipe; M14x27, Bolt; Joint,Fuel Filter; M14x27 Flange, Bolt, Banjo, M14 X 27, Bolt; Joint,Oil Pipe; M14x27, Bolt; Eye,Fuel Filter, Bolt; Joint,Fuel Filter; M14x27, Bolt; Eye,Fuel Pipe; M14x27 Flange, Bolt; Eye,Fuel Filter; M14x27 Flange, Bolt, Bolt; Eye,Oil Pipe; M14x27 Flange, Bolt; Eye,Fuel Filter; M14x27 | 1 |
| 11***20 | Valve; Fuel Feed Pump, Valve, Flow Control Hydraulic. Va | 2 |
| 11***30 | Adapter Fitting, Adapter, Check, Valve, Adapter; Eye Bolt,Fuel Feed Pump | 1 |
K6-2-11 Injectors, Fuel
| 10***20 | Gasket; Plug,Hsg; Id=8.2 Od=13.2, Gasket; Joint Bolt,Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Engine), Gasket, Washer, Seal, Gasket; Return Pipe,Nozzle Holder; Also Included In Gasket Set(Engine), Gasket; Return Pipe,Nozzle Holder; Id=8.2 Od=13.2, Gasket; Joint Bolt,Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Eng. & Head), Gasket; Return Pipe,Nozzle Holder; Also Included In Gasket Set(Eng. & Head), Bolt; Injector Nozzle Mounting, Bolt; (I.D. 8.2mm, O.D. 13.2mm), Bolt, Gasket; Eye Bolt Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Eng. & Head) | 2 |
| 10***71 | Bolt; Joint,Leak Off Pipe; M8x18 Flange, Bolt; M8 X 18, Bolt, Banjo, Bolt; Joint,Leak Off Pipe, Bolt; Joint,Leak Off Pipe; M8x18, Bolt; Eye Leak Off Pipe; M8x18 Flange, Bolt; Eye; M8x18 Flange, Bolt; Eye,Nozzle Holder | 1 |
| 11***90 | Bolt; Eye,Nozzle Holder, Bolt, Eye, Bolt; Eye,Nozzle Holder; M8x18 | 1 |
K6-8-2 Pump, Fuel Lift
| 10***60 | Bolt; Eye,Fuel Pipe; M14x27, Bolt; Joint,Fuel Filter; M14x27 Flange, Bolt, Banjo, M14 X 27, Bolt; Joint,Oil Pipe; M14x27, Bolt; Eye,Fuel Filter, Bolt; Joint,Fuel Filter; M14x27, Bolt; Eye,Fuel Pipe; M14x27 Flange, Bolt; Eye,Fuel Filter; M14x27 Flange, Bolt, Bolt; Eye,Oil Pipe; M14x27 Flange, Bolt; Eye,Fuel Filter; M14x27 | 1 |
| 11***30 | Adapter Fitting, Adapter, Check, Valve, Adapter; Eye Bolt,Fuel Feed Pump | 1 |
| 11***10 | Bolt; Eye,Fuel Inl,Inj Pump, Bolt; Eye,Oil Return,Inj Pump, Bolt, Banjo, Bolt; Eye,Fuel Outlet,Feed Pump, Valve; Overflow,Inj Pump | 1 |
K6-4-1 Fuel Pipes, Fuel Tank To Filter
| 13***5Z | Screw, M10 X 20 | 2 |
| 14***11 | Seal, Bonded | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
K7-2-1 Turbo, Pipework
| 02***89 | Stud, L1=85 | 1 |
| 02***61 | Pipe, Oil Drain | 1 |
| 05***60 | Bolt; Oil Pipe To Turbocharger Drain; M6x16 W/Lk Washer, Bolt, L=16 | 2 |
K7-1-2 Turbocharger
| 02***60 | Turbocharger | 1 |
| 02***03 | Kit-Repair, Turbocharger | 1 |
| 02***16 | Housing, Centre | 1 |
K7-1-1 Turbocharger
| 02***52 | Bolt | 6 |
| 02***53 | Plate, Locking | 6 |
| 02***60 | Turbocharger | 1 |
K8-1-2 Gasket Set, Overhaul, Top
| 02***24 | Kit-Gasket, Top Overhaul | 1 |
K8-2-1 Kit, Piston & Liner
| 02***99 | Kit-Engine Overhaul | 1 |
K8-1-1 Gasket Set, Overhaul
| 02***98 | Kit-Gasket, Engine Overhaul | 1 |
T Engine 1006-6t Low Emission, Tier 1
T1-1-1 Engine, Complete, Yh Build
| 01***00 | Engine, Complete, 1006-60t, Turbocharged, 144bhp | 1 |
T1-8-1 Engine Mountings
| 02***83 | Stud | 8 |
| 02***53 | Nut | 8 |
| 02***54 | Washer | 8 |
T1-6-1 Timing Case, Camshaft & Gears, Yh Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-7-1 Flywheel & Housing
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***82 | Seal, Felt | 1 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Yh Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T1-5-1 Fans, Pulleys, & Fan Belt, Yh Build
| 02***01 | Belt, Fan, Pair | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-2-1 Engine, Short, Yh Build
| 02***67 | Engine, Short | 1 |
T1-3-1 Block Assembly, Yh Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***08 | Plug | 1 |
T2-4-1 Lifting Plates, Engine, Yh Build
| 02***19 | Plate, Lifting | 1 |
| 02***57 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
T2-3-1 Rocker Cover
| 02***41 | Clip | 1 |
| 02***11 | Washer | 1 |
| 02***69 | Bush | 3 |
T2-2-1 Rocker Assembly, Push Rods & Tappets, Yh Build
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-1-1 Cylinder Head, Yh Build
| 02***95 | Plug, Taper | 1 |
| 02***20 | Bolt, Cylinder Head | 12 |
| 02***21 | Bolt, Cylinder Head | 20 |
T3-2-1 Manifold, Exhaust, Yh Build
| 02***83 | Ferrule | 2 |
| 02***88 | Gasket, Manifold, Induction/Exhaust | 2 |
| 02***37 | Gasket, Ind/Exhst Manifolds | 1 |
T3-3-1 Filter, Air
| 13***9Z | Bolt; Replaces 60***09 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 16***74 | Adapter, Vacuum Sensor | 1 |
T3-4-1 Silencer & Extension
| 02***07 | Gasket | 1 |
| 02***16 | Nut | 6 |
| 02***70 | Stud | 6 |
T3-1-1 Manifold, Induction, Yh Build
| 02***38 | Gasket | 1 |
| 02***88 | Gasket, Manifold, Induction/Exhaust | 2 |
| 02***36 | Manifold, Induction | 1 |
T4-3-1 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 10 |
| 13***3Z | Bolt, M10 X 16 | 6 |
| 13***2Z | Screw | 4 |
T4-2-1 Thermostat, Housing, Inlet & Outlet, Yh Build
| 02***95 | Plug, Taper | 1 |
| 02***46 | O Ring | 1 |
| 02***47 | Kit-Hose, By-Pass | 1 |
T4-1-1 Pump, Water, Yk Builds
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***00 | Pump, Water | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
T4-4-1 Radiator, Hoses & Fittings
| 13***8Z | Screw | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 4 |
T5-5-1 Cooler, Oil, & Pipework, Yh Build
| 02***14 | Seal, O Ring | 2 |
| 02***18 | Gasket, Oil Cooler Housing | 1 |
| 02***26 | O Ring | 2 |
T5-2-1 Pump, Oil, & Relief Valve, Yh Build
| 02***99 | Plunger | 1 |
| 02***08 | Spring | 1 |
| 02***09 | Seat | 1 |
T5-3-1 Piston Cooling Jets, Yh Build
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
T5-1-1 Sump, Oil, & Fittings, Yh Builds
| 02***05 | Insert | 2 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***09 | Clip | 1 |
T5-4-1 Filter, Oil, Yh Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 02***16 | Connector | 2 |
| 02***64 | Gasket | 1 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Yh Build
| 02***59 | Adapter, Union | 1 |
| 02***48 | Clamp | 3 |
| 02***49 | Clamp | 1 |
T6-1-1 Pump, Fuel Injection, Yh Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***63 | Bracket, Support | 1 |
T6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***64 | Olive | 2 |
T6-3-1 Fuel Pipes, Injection Pump, Yh Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
T6-7-1 Filter, Fuel
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Yh Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
T6-8-1 Pump, Fuel Lift
| 02***23 | Gasket | 1 |
| 02***91 | Gasket | 1 |
| 02***18 | Bolt | 4 |
T6-6-1 Filter, Fuel Sediment
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***07 | Washer, Locking | 1 |
T7-6-1 Compressor, Air Conditioning
| 69***72 | Compressor, Air Conditioning | 1 |
| 69***73 | Clutch, Assembly | 1 |
| 69***74 | Bearing, Clutch | 1 |
T7-2-1 Turbo, Pipework, Yh Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***06 | Nut | 1 |
T7-5-1 Compressor, & Installation, Air Conditioning
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***9Z | Setscrew, M8x35 | 1 |
T7-1-1 Turbocharger, Yh Build
| 02***97 | Housing, Centre Assembly | 1 |
| 02***69 | Gasket, Turbo To Manifold | 1 |
| 02***11 | Kit-Sundry Parts | 1 |
T8-1-1 Gasket Set, Top, Yh Build
| 02***91 | Kit-Gasket, Top | 1 |
| 02***56 | Kit-Gasket, Top | 1 |
T8-2-1 Gasket Set, Bottom, Yh Build
| 02***69 | Kit-Gasket, Bottom | 1 |
U Engine 6bg1trb05 Low Emission, Tier 2
U1-3-1 Block Assembly
| 02***07 | Bolt, L=56 | 4 |
| 02***12 | Dowel | 1 |
| 02***13 | Pin, D=10 X L=50 | 1 |
U1-8-1 Engine Mountings
| 13***4Z | Bolt | 2 |
| 13***1Z | Bolt, M16 X 220 | 2 |
| 16***VZ | Nut, High Strength | 8 |
U1-5-2 Fans,Pulleys, & Fan Belt, Eu Only
| 02***99 | Belt, Fan, (Pair), L=1256 | 1 |
| 02***86 | Bush | 1 |
| 02***29 | Pulley, Water Pump | 1 |
U1-1-1 Engine Complete
| 01***51 | Engine, Complete | 1 |
| 01***01 | Engine, Complete, 6bg1trb-05 | 1 |
| 21***19 | G.A, Engine Isuzu (Tier2) | 1 |
U1-7-1 Flywheel & Housing
| 02***33 | Flywheel, Assembly | 1 |
| 02***21 | Housing, Flywheel | 1 |
| 02***22 | Nut | 1 |
U1-6-1 Camshaft & Gears, Timing Case
| 01***50 | Bolt; Spindle To Thrust Plate; M10x55, Bolt, Bolt; Spindle To Thrust Plate | 2 |
| 02***09 | Washer, Cam | 1 |
| 02***54 | Cover, Inspection | 2 |
U1-5-1 Fans, Pulleys, & Fan Belt
| 02***99 | Belt, Fan, (Pair), L=1256 | 1 |
| 02***00 | Pulley, Water Pump | 1 |
| 02***86 | Bush | 1 |
U1-4-1 Crankshaft,Bearings, Pistons & Con-Rods
| 02***05 | Pin, Gudgeon | 6 |
| 02***06 | Bush, Small End | 1 |
| 02***10 | Rod, Connecting, Assembly | 6 |
U2-1-1 Cylinder Head
| 02***11 | Head, Assembly,Cylinder | 1 |
| 02***12 | Gasket, Cylinder Head | 1 |
| 02***13 | Guide, Valve, Inlet And Exhaust | 12 |
U2-2-1 Rocker Assembly, Inlet/Exhaust Valves, Push Rods & Tappets
| 02***77 | Spring, Rocker Shaft | 5 |
| 02***29 | Valve, Inlet | 6 |
| 02***30 | Valve, Exhaust | 6 |
U2-4-1 Lifting Plates, Engine
| 02***33 | Bolt, Flange Head, M10 X 12 | 3 |
| 02***50 | Bolt; Eng Hanger; M14x25, Bolt, Bolt; Eng Hanger, Bolt; M14 X 25 | 1 |
| 51***10 | Bracket, Lifting, Front | 1 |
U2-3-1 Rocker Cover
| 02***15 | Cover, Rocker | 1 |
| 10***20 | Bush, Rubber, Packing | 4 |
| 11***90 | Gasket, Gasket; Rocker Arm Cover, Gasket, Rocker Cover, Gasket; Hd To Cover; Also Included In Gasket Set(Eng. & Head) | 1 |
U3-2-1 Manifold,Exhaust
| 02***89 | Stud, L1=85 | 1 |
| 02***42 | Manifold, Exhaust | 1 |
| 10***01 | Nut, Nut; Exh Manif; M8 H=12.5 | 12 |
U3-4-1 Exhaust System
| 02***44 | Gasket | 1 |
| 13***9Z | Bolt; Replaces 60***09 | 3 |
| 13***1Z | Nut | 8 |
U3-3-1 Filter, Air
| 13***3Z | Screw | 2 |
| 13***9Z | Bolt; Replaces 60***09 | 2 |
| 14***6Z | Washer, M6 | 2 |
U3-1-1 Manifold,Induction
| 02***37 | Manifold, Induction | 1 |
| 02***40 | Gasket | 1 |
| 02***41 | Pipe, Air Inlet | 1 |
U3-3-2 Filter, Pre-Cleaner, Optional
| 21***76 | G.A, Pre Cleaner | 1 |
| 22***16 | Clip, Jubilee | 2 |
| 26***05 | Filter, Assembly, Pre-Cleaner | 1 |
U4-1-1 Pump, Water
| 02***41 | Gasket | 1 |
| 02***01 | Shaft | 1 |
| 02***39 | Bolt, Flange Head, M10 X 35mm | 1 |
U4-5-1 Radiator, Hoses & Fittings
| 13***3Z | Screw, M5 X 16 | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 21***55 | G.A, Radiator & Oil Coole | 1 |
U4-1-2 Pump, Water, Heavy Duty
| 02***08 | Gasket, Cover To Body | 1 |
| 02***09 | Cover, Water Pump | 1 |
| 02***06 | Kit-Repair, Water Pump | 1 |
U4-4-1 Cooler Assembly
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 21***55 | G.A, Radiator & Oil Coole | 1 |
| 30***03 | Guard, Fan | 1 |
U4-3-1 Radiator, Fittings & Mountings
| 13***5Z | Bolt, High Tensile | 4 |
| 13***7Z | Screw, M12x30; Replaces 60***07 | 2 |
| 13***8Z | Screw, M16x30mm | 2 |
U4-2-1 Thermostat, Housing, Inlet & Outlet
| 01***50 | Bolt; Hsg To Hd; M10x95, Bolt | 3 |
| 02***92 | Thermostat | 1 |
| 02***36 | Gasket | 1 |
U5-3-1 Piston Cooling Jets
| 02***50 | Jet, Piston Cooling | 6 |
| 11***20 | Valve; Check,Oil, Valve, Check, Assembly, Flow Control Hydraulic. Valve | 6 |
U5-4-1 Oil Filter
| 02***61 | Gasket | 1 |
| 02***39 | Bolt, Flange Head, M10 X 35mm | 2 |
| 02***81 | Element, Oil Filter, Cartridge, Element, Oil Filter, Cartridge; M/C'S Fitted With Tier 2 Engines See Footnote. M/C With T2 Engines M703785-70***87,70***90-70***93,70***95,70***96,70***23,70***25 & 70***28. | 1 |
U5-5-1 Cooler,Oil
| 02***35 | Washer | 4 |
| 02***35 | Cooler, Oil,Assembly | 1 |
| 02***36 | Gasket | 2 |
U5-2-1 Pump,Oil
| 02***55 | Strainer, Oil Suction | 1 |
| 02***49 | Pump, Oil, Assembly | 1 |
| 02***14 | Bolt, Flange Head, M10 X 25mm | 2 |
U5-1-1 Sump,Oil & Fittings
| 02***92 | Sump, Assembly | 1 |
| 02***93 | Dipstick, Assembly | 1 |
| 02***47 | Gasket, Oil Sump | 1 |
U5-6-1 Pipes,Oil
| 02***64 | Pipe, Oil Filt.To Inj.Pump | 1 |
| 02***66 | Bolt, Flange Head, M8 X 40 | 4 |
| 02***60 | Bolt; Fuel Pipe; M8x16 Flange, Bolt; Sensor; M8x16 Flange, Bolt; Water Pipe Clip; M8x16 Flange, Bolt, Bolt; Clip Fix; M8x16 Flange, Bolt; Brkt; M8x16 Flange, Bolt; Oil Filler, Bolt; Element To Case; M8x16 Flange, Bolt; Clip,Oil Pipe; M8x16 Flange, Bolt; Guide Tube; M8x16 Flange, Bolt; Plug,Thermostat; M8x16 Flange | 1 |
U6-2-1 Fuel System
| 02***38 | Clip | 6 |
| 02***12 | Pipe, Fuel | 1 |
| 02***74 | Adapter | 1 |
U6-7-1 Filter,Fuel
| 02***01 | Element, Fuel Filter, Cartridge | 1 |
| 02***97 | Filter, Assembly, Fuel | 1 |
| 02***88 | Head, Fuel Filter | 1 |
U6-5-1 Injectors,Fuel
| 10***20 | Gasket; Plug,Hsg; Id=8.2 Od=13.2, Gasket; Joint Bolt,Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Engine), Gasket, Washer, Seal, Gasket; Return Pipe,Nozzle Holder; Also Included In Gasket Set(Engine), Gasket; Return Pipe,Nozzle Holder; Id=8.2 Od=13.2, Gasket; Joint Bolt,Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Eng. & Head), Gasket; Return Pipe,Nozzle Holder; Also Included In Gasket Set(Eng. & Head), Bolt; Injector Nozzle Mounting, Bolt; (I.D. 8.2mm, O.D. 13.2mm), Bolt, Gasket; Eye Bolt Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Eng. & Head) | 2 |
| 10***71 | Bolt; Joint,Leak Off Pipe; M8x18 Flange, Bolt; M8 X 18, Bolt, Banjo, Bolt; Joint,Leak Off Pipe, Bolt; Joint,Leak Off Pipe; M8x18, Bolt; Eye Leak Off Pipe; M8x18 Flange, Bolt; Eye; M8x18 Flange, Bolt; Eye,Nozzle Holder | 1 |
| 17***00 | Injector | 6 |
U6-4-1 Fuel Pipes, Fuel Tank To Filter
| 13***5Z | Screw, M10 X 20 | 2 |
| 14***11 | Seal, Bonded | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
U6-6-2 Filter, Fuel Sediment
| 32***08 | Bowl, Assembly | 1 |
| 32***33 | Seal, O'Ring | 1 |
| 32***57 | Filter, Fuel Sediment, Assembly | 1 |
U6-1-1 Pump,Fuel Injection, Installation
| 02***15 | Gasket, Inj/Pump To T/Case | 1 |
| 02***03 | Bolt | 7 |
| 02***30 | Washer | 3 |
U6-1-2 Pump, Fuel Injection, Governor,Fuel Pump, Service Parts
| 10***30 | O-Ring, Gasket; Fuel Feed Pump,Inj Pump, O Ring, O-Ring; (Sub For Gv10976) | 1 |
| 11***50 | Gasket; Plug To Hsg, O Ring | 1 |
| 11***60 | Nut, Nut; Eng Stop Lever,Gov | 1 |
U6-6-1 Filter, Fuel Sediment
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***07 | Washer, Locking | 1 |
U6-8-1 Pump, Fuel Lift
| 10***60 | Bolt; Eye,Fuel Pipe; M14x27, Bolt; Joint,Fuel Filter; M14x27 Flange, Bolt, Banjo, M14 X 27, Bolt; Joint,Oil Pipe; M14x27, Bolt; Eye,Fuel Filter, Bolt; Joint,Fuel Filter; M14x27, Bolt; Eye,Fuel Pipe; M14x27 Flange, Bolt; Eye,Fuel Filter; M14x27 Flange, Bolt, Bolt; Eye,Oil Pipe; M14x27 Flange, Bolt; Eye,Fuel Filter; M14x27 | 1 |
| 11***30 | Adapter Fitting, Adapter, Check, Valve, Adapter; Eye Bolt,Fuel Feed Pump | 1 |
| 11***10 | Bolt; Eye,Fuel Inl,Inj Pump, Bolt; Eye,Oil Return,Inj Pump, Bolt, Banjo, Bolt; Eye,Fuel Outlet,Feed Pump, Valve; Overflow,Inj Pump | 1 |
U7-1-1 Turbocharger
| 02***04 | Journal Bearing | 3 |
| 02***08 | Ring, Seal | 1 |
| 02***09 | Ring, Seal | 1 |
U7-3-1 Compressor, & Installation, Air Conditioning
| 13***3Z | Nut | 4 |
| 13***0Z | Capscrew | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 7 |
U7-2-1 Turbo, Pipework
| 02***82 | Nut | 1 |
| 02***85 | Clip | 1 |
| 02***86 | Clip | 1 |
U7-1-2 Turbocharger
| 02***13 | Stud | 4 |
| 02***96 | Kit-Repair, Turbocharger | 1 |
| 02***99 | Clamp | 1 |
U8-2-1 Kit,Piston & Liner
| 02***39 | Kit-Engine Overhaul | 1 |
U8-1-2 Gasket Set, Overhaul
| 02***84 | Kit-Gasket, Engine Overhaul | 1 |
U8-1-1 Gasket Set, Overhaul, Top
| 02***83 | Kit-Gasket, Top Overhaul | 1 |
JS200W-T2 serial number reference
Locate the machine identification plate on the frame or chassis. Confirm applicability with a JCB dealer using the specific serial number.
| Prefix | Identifies | Notes |
|---|---|---|
| 00809117-00809999 | JCB JS200W-T2 Wheeled Excavator. Applicability supported by Parts Catalogue Manual covering this specific serial range. | |
| 02436101-02436300 | JCB JS200W-T2 Wheeled Excavator. Applicability supported by Parts Catalogue Manual covering this specific serial range. |
Frequently asked questions
What engine does the JS200W-T2 use?
The JS200W-T2 uses a 128 kW (173 hp) Isuzu engine or the JCB EcoMAX 448 TCA-99, compliant with EU Stage IIIB and EPA Tier 4 Interim emissions standards. It does not use DEF or DPF systems.
What is the operating weight range?
Operating weight varies by configuration from 19,618 kg to 22,490 kg. Dual wheel setups are heavier; single wheel configurations reduce weight by approximately 400 kg.
What model replaced the JS200W-T2?
The JS200W-T2 was succeeded by the JS200W T3 series. It followed the JS200W TAB generation.
What JS200W-T2 owners discuss
What engine powers the JS200W-T2 and what are its key performance characteristics?
The JS200W-T2 is powered by a JCB EcoMAX 448 TCA-99 engine. It is rated at 128 kW (173 hp) and is engineered to produce high torque at low revolutions for improved efficiency. The engine complies with EU Stage IIIB and EPA Tier 4 Interim emissions standards.
What are the common hydraulic system behaviors and known fault codes for this model?
The machine utilizes Bosch Rexroth valve blocks and pumps. A specific diagnostic fault code, 113 MAX FLW, indicates an open circuit in the max flow solenoid. For JS200W machines, this error is only detectable when the engine is not running because the component is a proportional valve. Code 213 MAX FLW indicates a short circuit in the same solenoid. Code 111 BOOM SP indicates an open circuit in the boom lower speed regulation output.
What undercarriage and structural features define the JS200W-T2?
The machine features a high-strength undercarriage with a fully enclosed, fully-welded box section for durability. The upper frame is rigid to provide maximum support. The boom and dipper ends are cushioned to prevent shock loadings and protect the machine. The turret is welded to both the upper and lower undercarriage frames to increase strength and reduce stress.
What electrical or sensor issues are frequently reported or documented?
Operators and technicians monitor EMS (Electronic Monitoring System) electrical messages for open circuits, short circuits, and CAN communication errors. Specific faults include code 212 INT LT for a short-circuited interior light. General EMS diagnostics cover sensor calibration and solenoid status. The machine uses a 17-character PIN (ISO 3779 format) where the 10th character indicates the year of manufacture.
What are the typical wear patterns or maintenance considerations for this wheeled excavator?
The JS200W uses dual wheels; subtracting 400 kg is required if the machine is equipped with single wheels. The hydraulic system includes a servo filter element and an in-line drain filter element located in the hydraulic compartment. The machine is equipped with a selectable axle lock. Viscous rubber mounts are used to minimize noise and vibration. The quickhitch system is designed for fast attachment changing.
What is the recommended fluid specification for the engine oil?
JCB recommends using JCB branded fluids verified for proper machine component protection. Equivalent alternatives are allowed. Specific JCB fluid types include JCB Super Universal Agricultural lubricants for certain applications. For precise capacities and specifications, consult the operation and maintenance manual for the specific serial range.
What should be checked when buying a used JS200W-T2?
Verify the serial number range against the parts catalogue manual (e.g., SN the OEM part reference-the OEM part reference or SN the OEM part reference-the OEM part reference) to ensure correct parts applicability. Check the condition of the fully welded box section undercarriage for impact damage. Inspect the hydraulic oil cooler (part number the OEM part reference) for leaks or blockages. Verify the functionality of the max flow solenoid and boom lower speed regulation output by checking for fault codes 113, 213, and 111. Confirm the status of the 17-character PIN and manufacturing plant code.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb JS200W-T2. Related factory variants of the same model family:
JS200W-T2
Need a specific JS200W-T2 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.