JCBagriculturaljs wheeled excavators
Jcb JS130W-T2(WHEELED)
Maintenance schedule, common problems & OEM parts breakdown
The JCB JS130W-T2(WHEELED) is a medium-sized wheeled excavator produced from approximately 1996 to 2008. It is powered by a turbocharged Isuzu engine delivering 63 kW (85 hp) to 69 kW (92 hp) depending on the specific configuration. The machine features four-wheel drive with oscillating front and rear axles. Operating weight ranges from 12,700 kg to 14,960 kg depending on the bucket and wheel configuration. The JS130W-T2 is part of the JS series wheeled excavator lineage, succeeding earlier Hydradig models and preceding the JS130W-T3 generation.
The JS130W-T2 remains relevant in the used market due to its robust Isuzu powertrain and simple hydraulic system, which lack complex emissions aftertreatment found in later tiers. Its wheeled chassis offers high travel speeds and reduced ground pressure compared to tracked variants, making it suitable for paved surfaces and utility work. The machine's longevity is supported by a wide availability of aftermarket parts and a straightforward maintenance schedule that extends engine oil intervals to 500 hours.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb JS130W-T2(WHEELED) specifications
Engine
| Model | Isuzu A4BGIT |
| Net Power | 69 kW (92 hp) |
| Displacement | 4.3 L |
| Cylinders | 4 |
| Aspiration | Turbocharged |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight (Dual Wheels) | 12,700 kg (27,998 lb) to 14,960 kg (32,981 lb) varies by configuration/series |
| Operating Weight (Single Wheels) | 12,300 kg (27,117 lb) to 14,560 kg (32,099 lb) varies by configuration/series |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
| Transport Weight | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length (Monoboom 4700mm w/ 2100mm arm) | 7,580 mm (24 ft 10 in) |
| Transport Length (Monoboom 4700mm w/ 2500mm arm) | 7,600 mm (24 ft 11 in) |
| Transport Length (Monoboom 4700mm w/ 3000mm arm) | 7,630 mm (25 ft 0 in) |
| Transport Length (Triple Stage Articulated Boom 5000mm w/ 2100mm lever) | 7,310 mm (24 ft 0 in) |
| Transport Width | 2,490 mm (8 ft 2 in) |
| Transport Height | 3,040 mm (9 ft 11 in) |
| Tail Swing Radius | 1,240 mm (4 ft 1 in) |
| Ground Clearance | 350 mm (1 ft 2 in) |
| Undercarriage Length | Not documented for this exact serial range — verify with your dealer |
Performance
| Max Dig Depth (Monoboom 4700mm w/ 2100mm arm) | 4,775 mm (15 ft 8 in) |
| Max Dig Depth (Monoboom 4700mm w/ 2500mm arm) | 5,175 mm (16 ft 11 in) |
| Max Dig Depth (Monoboom 4700mm w/ 3000mm arm) | 5,675 mm (18 ft 7 in) |
| Max Dig Depth (Triple Stage Articulated Boom 5000mm w/ 2100mm lever) | 5,020 mm (16 ft 6 in) |
| Max Reach at Ground | 7,745 mm (25 ft 5 in) to 8,585 mm (28 ft 2 in) varies by configuration/series |
| Max Dump Height | 6,780 mm (22 ft 3 in) to 7,400 mm (24 ft 3 in) varies by configuration/series |
| Max Cutting Height | 9,185 mm (30 ft 1 in) to 9,775 mm (32 ft 1 in) varies by configuration/series |
| Swing Speed | 13.4 rev/min |
| Travel Speed | 7.6 km/h (4.7 mph) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
| Drawbar Pull | Not documented for this exact serial range — verify with your dealer |
Forces
| Bucket Digging Force | Not documented for this exact serial range — verify with your dealer |
| Stick/Arm Digging Force | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 240 L (63.4 gal) |
| Hydraulic System/Tank | 124 L (32.8 gal) |
| Engine Oil | 14.7 L (3.9 gal) |
| Cooling System | 16.4 L (4.3 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
JS130W-T2(WHEELED) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 14.7 l (3.88 US gal) | JCB 15W/40 Multigrade engine oil (-10 C to 50 C / 14 F to 122 F); JCB Advanced engine oil for DPF equipped low-emission engines |
| Cooling system | 16.4 l (4.33 US gal) | JCB engine coolant (silicate-based multipurpose coolant) |
| Fuel tank | 240 l (63.4 US gal) | Diesel Oil (See Types of Fuel) |
| Hydraulic system total AND hydraulic tank | 124 l (32.7 US gal) | JCB Genuine hydraulic oil |
| Final drive (each) | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Swing drive | Not documented for this exact serial range — verify with your dealer | JCB HD90 Gear Oil |
| Pilot/other circuits if listed | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease (spec only) | N/A | JCB grease (JCB boom grease or JCB blue grease) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb JS130W-T2(WHEELED) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the JS130W-T2(WHEELED) beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, collect baseline samples from the engine, hydraulic system, front axle, rear axle, and final drives. Compare subsequent samples against this baseline to detect early bearing wear or contamination. Inspect the hydraulic return filter magnet for metallic debris before disposal. Monitor the engine oil dipstick and hydraulic sight gauge daily during the 10-hour walkaround. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting the machine's API spec. Replace the primary and secondary fuel filters at 500 hours to protect common-rail injectors from dirty fuel.
Corrective & Common Repairs
Address turbocharger shaft play, boot condition, and wastegate function during the 1000-hour service. Check alternator and starter load to prevent electrical failures. Inspect hoses and cylinders for pinhole seepage or cylinder rod scoring at the kingpost and boom. Replace the hydraulic return filter if the magnet shows excessive debris. Verify belt tension on the alternator, A/C, and fan belts. Inspect the hydraulic tank for sludge or silicate separation in the expansion bottle, indicating coolant contamination.
Overhaul & Rebuild Points
At 2000 hours, measure swing ring radial and axial play using a dial indicator. Inspect the boom, arm, chassis, and side frames for unauthorized welding or structural cracking. Service disc brakes and check immersed brake condition. Check injector spray pattern via the diagnostic tool and replace as required. Drain and clean the hydraulic tank thoroughly before refilling. Torque slew ring bolts to specification. Inspect the slew gearbox and track gearboxes for wear, using JCB HD90 Gear Oil.
Seasonal & Environment Servicing
In cold weather, use JCB 15W/40 Multigrade oil rated for -10°C to 50°C. In extreme cold, use JCB Super Universal Agricultural oil rated for -15°C to 30°C. Check the coolant expansion bottle for proper level and silicate protection. Inspect the cab HVAC system, including A/C pressure and evaporator condition. Verify tire pressure and inspect for cut damage, especially in rocky terrain. Grease all pivot points frequently in dusty environments. Ensure the air filter is clean to prevent engine wear.
JS130W-T2(WHEELED) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 02/800001 | Element, Fuel Filter, Cartridge | Fuel system service | Check fitment → |
| 9095720140 | Packing, Gasket | Fuel system service | Check fitment → |
| 32/925757 | Filter, Fuel Sediment, Assembly | Fuel system service | Check fitment → |
| 32/925760 | Element, Fuel Sediment Filter | Fuel system service | Check fitment → |
| 02/801620 | Filter, Assembly, Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
JS130W-T2(WHEELED) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0181 | Fuel Temperature Sensor Fault | Fuel temperature sensor gradient fault or circuit error. | Inspect fuel temperature sensor wiring and connections; verify sensor resistance against factory specifications. |
| P0190 | Rail Pressure Sensor Signal Gradient Fault | Fuel rail pressure sensor signal drift or gradient error. | Check fuel rail pressure sensor wiring for damage; verify sensor signal output with a diagnostic tool. |
| P0191 | Rail Pressure Sensor Fault | Fuel rail pressure sensor circuit failure or out-of-range signal. | Test fuel rail pressure sensor; replace if signal is invalid or sensor is damaged. |
| P0340 | G Sensor Fault (No Signal) | G-sensor circuit open or no signal detected by the ECU. | Check G-sensor wiring harness and connector for corrosion or disconnection; verify sensor operation. |
| P0341 | Camshaft Position Sensor A Circuit Range/Performance | Cam signal drift, lost signal, or missing event within expected window. | Inspect camshaft position sensor and wiring; check sensor alignment and gap. |
| P029E | Injector Drift Fault Detection on Injector 1 | Injector 1 drift detected by the ECU. | Check injector 1 wiring and connector; test injector performance and replace if faulty. |
| P0087 | Fuel Rail/System Pressure Too Low | Low fuel pressure due to clogged filters, failing lift pump, or leak. | Check fuel filters and lift pump operation; inspect fuel lines for leaks. |
| P0117 | Engine Coolant Temperature Sensor Circuit Low Voltage | Coolant temperature sensor circuit short to ground or sensor failure. | Inspect coolant temperature sensor wiring and connector; test sensor resistance. |
| P0521 | Engine Oil Pressure Sensor Range/Performance Issue | Oil pressure sensor signal out of expected range. | Check oil pressure sensor wiring and connector; verify actual oil pressure with a mechanical gauge. |
| U0100 | Lost Communication with Engine Control Module | CAN bus communication error between ECM and other modules. | Check CAN bus wiring for damage or corrosion; verify battery voltage and ground connections. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
JS130W-T2(WHEELED) attachments & work tools
Buckets
Available widths range from 457 mm (18 in) to 1829 mm (72 in). Standard digging capacities span 0.37 to 1.4 cubic yards, with ditching variants reaching up to 1.4 cubic yards. Mounting options include pin-on configurations, while quick-coupler compatibility is supported by aftermarket manufacturers such as Steelwrist.
Hydraulic hammers
Compatible breaker weight class is approximately 2410 kg (5313 lbs), suitable for the JS130 and JS145 series. This class matches the machine's operating weight and hydraulic flow requirements for effective demolition work.
Quick couplers
JCB offers a purpose-designed quickhitch system for the JS range to facilitate rapid attachment changes. Aftermarket options include mechanical quick couplers and advanced tilt-rotator couplers from manufacturers like Steelwrist.
Thumbs/grapples
Hydraulic pin-on thumbs are available with two or four tines constructed from AR400 steel. Mechanical thumbs and grapples are also offered by aftermarket suppliers to enhance material handling capabilities.
Rippers
Single-point rippers are available for breaking hard ground or rock. These attachments are designed to mount directly to the dipper stick for enhanced digging force and penetration.
Hydraulic-kit notes
The machine utilizes a load-sensing hydraulic system with dual piston variable displacement pumps providing a flow rate of 248 l/min. The system relief valve pressure is set to 34294.5 kPa. High-flow circuits are required for heavy-duty attachments like hydraulic hammers.
All JS130W-T2(WHEELED) assemblies by section
Every catalogued assembly group for the Jcb JS130W-T2(WHEELED). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A2-1-2 Bucket, 600mm Wide, 0.315 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***01 | Bucket, Gp 600mm Wide | 1 |
A2-1-8 Bucket, 1100mm Wide, 0.715 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***07 | Bucket, Gp 1100mm Wide | 1 |
A2-2-2 Quickhitch, Hydraulic, Miller
| 25***02 | Valve, Check | 1 |
| 33***95 | Bush, Blocking Bar, Assembly | 1 |
| 33***54 | Spring, Quickhitch | 1 |
A2-1-9 Bucket, 1200mm Wide, 0.795 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***08 | Bucket, Gp 1200mm Wide | 1 |
A2-1-4 Bucket, 750mm Wide, 0.430 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***03 | Bucket, Gp 750mm Wide | 1 |
A2-1-7 Bucket, 1000mm Wide, 0.630 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***06 | Bucket, Gp 1000mm Wide | 1 |
A2-1-3 Bucket, 700mm Wide, 0.390 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***02 | Bucket, Gp 700mm Wide | 1 |
A2-4-1 Bucket, Scoop, General Purpose
| 51***02 | Pin, Locking | 0 |
| 98***00 | Bucket, Scoop, G.P. 457mm, Js130 | 1 |
| 98***01 | Bucket, Scoop, G.P. 508mm, Js130 | 1 |
A2-2-11 Quickhitch, Manual, Millers
| 33***10 | Washer, Belleville | 2 |
| 33***11 | Rivet | 4 |
| 33***61 | Screw, Adjuster; Replaced By 98***41, See San 20965 | 1 |
A2-1-5 Bucket, 800mm Wide, 0.470 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***04 | Bucket, Gp 800mm Wide | 1 |
A2-1-1 Bucket, 500mm Wide, 0.235 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***00 | Bucket, Gp 500mm Wide | 1 |
A2-1-6 Bucket, 900mm Wide, 0.550 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***05 | Bucket, Gp 900mm Wide | 1 |
A2-5-1 Bucket, General Purpose
| 33***46 | Bucket, Gp 1219mm Wide | 1 |
| 33***55 | Bucket, Gp 610mm Wide | 1 |
| 33***57 | Bucket, Gp 762mm Wide | 1 |
A2-2-1 Quickhitch, Hydraulic, Miller
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 25***02 | Valve, Check | 1 |
| 33***94 | Bar, Blocking, Assembly | 1 |
A2-1-10 Bucket, 1300mm Wide, 0.880 Cubic Metres
| 33***08 | Adapter, Tooth V19 | 0 |
| 51***02 | Pin, Locking | 0 |
| 98***09 | Bucket, Gp 1300mm Wide | 1 |
A2-2-5 Quickhitch, Bug, From 06/06
| 25***02 | Valve, Check | 2 |
| 33***95 | Bush, Blocking Bar, Assembly | 1 |
| 33***54 | Spring, Quickhitch | 1 |
B Bodywork, Cab, Loader End
B1-5-10 Cowlings, Fig 1
| 33***95 | Panel, Soundproofing | 1 |
| 33***96 | Cover, Soundproofing | 1 |
| 33***22 | Leg, Left Hand | 1 |
B1-3-1 Tank, Hydraulic
| 13***5Z | Screw, M10 X 20 | 4 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***5Z | Bolt | 4 |
B1-9-10 Grab Stowage Bar, Standard
| 82***00 | Pin, Linch | 2 |
| JL***59 | Bar, Grab | 1 |
| JL***60 | Pin, Pivot | 2 |
B1-9-2 Wheelchock, German
| 12***01 | Strap | 2 |
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 6 |
B1-7-1 Lifting Lug, Counterweight
| JN***74 | Lug, Lifting | 2 |
B1-9-3 Bar, Grab Stowage, Front Dozer Option
| JL***14 | Pin, Pivot, Dozer Grab | 2 |
| JL***12 | Bar, Front Dozer Grab, Assembly | 1 |
B1-9-1 Chassis
| 13***5Z | Screw, M10 X 20 | 2 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***8Z | Screw | 16 |
B1-5-20 Cowlings, Fig 2, Doors
| 13***1Z | Screw; Replaces 60***01,60***1r | 8 |
| 13***5Z | Screw | 4 |
| 13***5Z | Bolt, High Tensile | 4 |
B1-11-1 Rear Dozer, German
| 10***08 | Boss | 4 |
| 13***8Z | Bolt | 2 |
| 13***1Z | Nut, M5-8 | 2 |
B1-2-1 Cover, Lower, Mainframe
| JN***00 | Under, No Inspection Cover; Replaces Knb0531 | 1 |
| JN***21 | Cover, Under | 1 |
| JN***99 | Under, No Inspection Cover | 1 |
B1-10-15 Blade, Dozer, Front Mounted
| 13***8Z | Screw | 4 |
| 13***6Z | Bolt; Replaces 60***16 | 4 |
| 13***0Z | Bolt | 4 |
B1-5-2 Cowlings, Engine Cover
| 13***5Z | Screw, M12x20; Replaces 60***5r | 6 |
| 13***1Z | Nut | 2 |
| 13***1Z | Nut, High Strength, M10 | 2 |
B1-6-1 Counterweight, Rear
| 13***2Z | Bolt, M27 X 240 | 4 |
| 33***97 | Counterweight | 1 |
| KN***16 | Plate, Spl | 1 |
B1-5-40 Cowlings, Fig 4
| 33***63 | Grille, Right Hand Housing, Js130, 145 | 1 |
| 33***70 | Grille, Left Hand Rear | 1 |
| 33***21 | Cover, Left Hand Top | 1 |
B1-5-1 Cowlings, Engine Cover
| 13***5Z | Screw, M12x20; Replaces 60***5r | 6 |
| 13***1D | Bolt | 1 |
| 13***0Z | Bolt | 3 |
B1-5-30 Cowlings, Fig 3, Toolbox & Hand Rail
| 13***1Z | Screw; Replaces 60***01,60***1r | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 13***8Z | Screw | 2 |
B1-22-1 Auto Greasing, Front Axle, Front & Rear Stabiliser
| 13***1Z | Nut | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 81***48 | Adapter, 2 Way | 4 |
B1-21-5 Stabiliser, Front
| 10***17 | Pin, Pivot | 2 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***3Z | Bolt | 6 |
B1-21-15 Stabiliser, Rear
| 10***17 | Pin, Pivot | 2 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 4 |
| 13***3Z | Bolt | 6 |
B1-10-5 Blade, Dozer, Rear Mounted
| 13***8Z | Screw | 4 |
| 13***6Z | Bolt; Replaces 60***16 | 4 |
| 13***0Z | Bolt | 4 |
B1-4-1 Tank, Diesel Fuel
| 13***5Z | Screw, M12x20; Replaces 60***5r | 1 |
| 13***5Z | Bolt | 6 |
| 14***9Z | Washer | 1 |
B1-6-30 Rear Mirror., Counterweight
| 13***1Z | Bolt; Replaces 60***1r | 1 |
| 14***9Z | Washer | 1 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 1 |
B1-1-1 Mainframe
| 33***80 | Platform, Left Hand | 1 |
| 33***35 | Mainframe, Js130w | 1 |
| JN***36 | Platform, Right Hand | 1 |
B2-13-1 Visor, Sun
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 60***3Z | Screw, Countersunk | 3 |
| JH***56 | Bracket, Visor | 1 |
B2-5-3 Console, Cab Servo Control, Right Hand
| 13***3Z | Screw | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-7-1 Mirrors, External
| 13***2Z | Bolt, M12x50 | 2 |
| 26***01 | Glass | 1 |
| 26***37 | Bracket, Mounting Mirror | 1 |
B2-1-12 Cab, Fig 2
| 33***32 | Joint, Ball | 2 |
| 69***08 | Seal, Plastic | 1 |
| 69***12 | Frame, Assembly | 1 |
B2-11-1 Fire Extinguisher
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***3Z | Nut | 2 |
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
B2-10-2 Floor Components, Seat Slide &, Isolator Lever
| 13***5Z | Screw, M10 X 20 | 4 |
| 13***8Z | Capscrew | 8 |
| 14***1Z | Washer, M16 Plain | 1 |
B2-3-10 Seat, Air Suspension, Grey Brown Fabric / Sahara Pvc
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***5Z | Capscrew | 4 |
| 13***7Z | Capscrew, M8x25mm | 1 |
B2-13-4 Vandal Guard
B2-12-4 Rain Visor
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
B2-3-11 Seat, Suspension, Charcoal Grey
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***5Z | Capscrew | 4 |
| 13***7Z | Capscrew, M8x25mm | 1 |
B2-1-3 Cab, Fig 1
| 12***09 | Cap, Nut M8; Replaces 69***72 | 7 |
| 13***8Z | Screw | 4 |
| 21***47 | Cab, Abi C/W Glass, Js Range; Replaces 33***49 | 1 |
B2-4-20 Console (Moving), Cab Servo Control, Left Hand
| 13***01 | Screw, Grub | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 33***47 | Spindle, Console, L/H | 1 |
B2-18-1 Direct Glazing, Replacement Material
| 41***01 | Sealant, Clear Dp2205, 310ml | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-6-2 Wash/Wipe, Windscreen
| 13***1Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 14***5Z | Washer, Spring, M5 | 2 |
B2-1-22 Cab, Fig 3
| 12***09 | Cap, Nut M8; Replaces 69***72 | 3 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***4Z | Bolt | 6 |
B2-3-1 Seat
| 13***5Z | Bolt, High Tensile | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-9-10 Guard, Fops Cage
| 13***9Z | Bolt | 4 |
| 13***2Z | Bolt; Replaces 60***2r | 4 |
| 13***3Z | Nut, M16 | 4 |
B2-4-3 Console, Cab Servo Control, Left Hand
| 13***7Z | Capscrew, Socket Head | 4 |
| 14***6Z | Washer, Spring | 2 |
| 33***67 | Handle, Console, Left Hand | 1 |
B2-2-3 Door & Components
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 33***62 | Catch, Assembly, Js Cab | 1 |
B2-13-2 Cover, Cab, Overnight
| 99***00 | Cover, Cab | 1 |
B2-4-10 Console, Cab Servo Control, Left Hand, Fig 2
| 13***3Z | Screw | 1 |
| 13***1Z | Nut, High Strength | 3 |
| 13***1Z | Nut, High Strength, M10 | 3 |
B2-16-1 Cab Mountings, Cab Foor & Mat
| 13***7D | Screw | 28 |
| 33***53 | Plate, Kick | 1 |
| 82***26 | Bolt | 4 |
B2-10-30 Floor Components, Fig 2
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***26 | Stand, Rear | 1 |
B2-7-2 Mirrors, External
| 13***1Z | Nut, High Strength, M10 | 4 |
| 13***7D | Capscrew, M10 | 4 |
| 33***60 | Mirror, External | 2 |
B3-5-5 Lock, Bucket Link, Used With Grab
| JN***06 | Pin, Lock | 1 |
| JN***77 | Clip, R | 1 |
B3-2-20 Dipper 3.0m
| 13***3Z | Bolt | 1 |
| 17***VZ | Nut, High Strength, M16; Replaced By 173r016vz, See San 11641 | 2 |
| 17***VZ | Nut | 2 |
B3-10-1 Boom, Lower, Triple Articulating
| 17***VZ | Nut, High Strength, M16; Replaced By 173r016vz, See San 11641 | 2 |
| 17***VZ | Nut; Replaced By 173r020vz | 2 |
| 17***VD | Nut | 4 |
B3-12-1 Bridge Bashing, U K Only
| JH***07 | Lug, Fitment | 1 |
| JN***21 | Lug, Lifting | 1 |
| JH***80 | Strap, With Link | 1 |
B3-1-1 Boom
| 17***VZ | Nut, High Strength, M16; Replaced By 173r016vz, See San 11641 | 8 |
| 17***VZ | Nut | 12 |
| 17***VZ | Nut | 4 |
B3-11-1 Boom, Upper, Triple Articulating
| 17***VD | Nut | 6 |
| 17***VD | Nut | 2 |
| 60***4D | Bolt | 4 |
B3-2-1 Dipper 2.1m
| 17***VZ | Nut, High Strength, M16; Replaced By 173r016vz, See San 11641 | 2 |
| 17***VZ | Nut | 2 |
| 33***20 | Arm, 2.1m Assembly, C/W Bushings | 1 |
B3-2-10 Dipper 2.5m
| 17***VZ | Nut, High Strength, M16; Replaced By 173r016vz, See San 11641 | 2 |
| 17***VZ | Nut | 2 |
| 33***88 | Arm, Dipper, Standard, 2.5m Long | 1 |
B3-6-1 Grab Stowage Bar, Standard
| 82***00 | Pin, Linch | 2 |
| JL***59 | Bar, Grab | 1 |
| JL***60 | Pin, Pivot | 2 |
B3-5-1 Tipping Link, & Linkage
| 17***VZ | Nut, High Strength, M16; Replaced By 173r016vz, See San 11641 | 4 |
| 17***VZ | Nut | 4 |
| 60***4Z | Bolt | 2 |
B5-2-10 Decals, High Raise Cab, Sales Special
| 81***58 | Decal, Slew Lock, Hydraulic Raised Cab | 1 |
| 81***59 | Decal, Cab Lower Valve | 1 |
B5-25-1 Guide Charts, Ams
| 81***54 | Label, Chart, Guide, English, Wheeled | 1 |
| 81***55 | Label, Chart, Guide, English, Wheeled | 1 |
| 81***56 | Label, Chart, Guide Wallet | 1 |
B5-1-12 Decals, Machine
| 81***21 | Decal, Isolator Label, Wheeled Ams Machines | 1 |
| 81***22 | Decal, Jcb Insignia (Black) | 2 |
| 81***40 | Decal, Jcb Insignia, Counterweight 450 X 564 mm | 1 |
B5-10-1 Labels, Sound Pressure Level
| 81***08 | Label, Ear Protection | 1 |
| 81***26 | Label, Noise, 101 Lwa | 1 |
| 81***27 | Label, Sound Pressure Level, Internal 102 Db Lwa | 2 |
B5-5-1 Paint
| 42***01 | Thinners, 5 Litres | 0 |
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
B5-3-1 Tools
| 40***17 | Grease, Hp, 400g X 24 | 1 |
| 82***02 | Bar, Tommy | 1 |
| 91***00 | Gauge, Tyre Pressure | 1 |
B5-2-1 Decals
| 81***03 | Decal, Jcb Insignia (Black), Tab Boom | 2 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
C Electrics-Machine, Cab & Engine
C1-6-1 Light, Working,, Boom And Toolbox
| 12***05 | Bracket | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***9Z | Screw | 1 |
C1-1-1 Electrics, Machine
| 13***1Z | Screw; Replaces 60***01,60***1r | 1 |
| 13***3Z | Screw | 3 |
| 13***5Z | Bolt, High Tensile | 3 |
C1-11-1 Light, Number Plate
| 33***47 | Bracket, Number Plate Light | 1 |
| 70***65 | Light, Number Plate, 24 Volt | 1 |
| 72***35 | Bulb, 24v 5w | 1 |
C1-9-2 Light, Head, Left Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***07 | Light, & Side Repeater, Lh Dip, Lh Side | 1 |
C1-2-1 Electrics, Cab
| 13***5Z | Screw | 2 |
| 13***1Z | Screw; Replaces 60***01,60***1r | 1 |
| 13***5Z | Screw, M10 X 20 | 1 |
C1-1-2 Electrics, Machine
| 13***1Z | Screw; Replaces 60***01,60***1r | 1 |
| 13***3Z | Screw | 3 |
| 13***5Z | Bolt, High Tensile | 3 |
C1-3-1 Battery Installation, 24 Volt
| 13***1D | Setscrew, M8 X 12mm | 3 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***7D | Setscrew, M12 X 25 | 2 |
C1-5-2 Pump, Diesel, Refuelling
| 13***3D | Screw | 4 |
| 13***5D | Screw, Set | 2 |
| 13***8D | Setscrew | 2 |
C1-9-10 Bracket, Head Light
| 13***7Z | Bolt, M10x25 | 5 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 5 |
C1-12-1 Harness, Dozer
| 70***19 | Cover, Switch Actuator, Dozer | 1 |
| 70***32 | Switch, 24v | 1 |
| 72***77 | Harness, Dozer | 1 |
C1-10-1 Light,, Dipper Side, German Machine Only
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***1Z | Nut, M5-8 | 4 |
| 14***5Z | Washer, Spring, M5 | 4 |
C1-4-2 Light, Working, Additional
| 12***05 | Bracket | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C1-8-1 Light, Rear
| 13***8Z | Screw, M8x30 | 4 |
| 13***1Z | Nut, M8 | 8 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
C1-9-3 Light, Head, Right Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***09 | Light, & Side Repeater, Rh Dip, Lh Side | 1 |
C1-13-1 Circuit, Hammer, Dual Switching
| 33***82 | Bracket, Footrest | 1 |
| 72***83 | Harness, Footrest | 1 |
| 82***43 | Tie, Cable, L=300mm X W=3.6mm | 1 |
C1-7-1 Harnesses & Switches, Auxiliary
| 70***00 | Switch, Hazard Warning | 1 |
| 70***35 | Switch, Pressure, Zf Transmission | 1 |
| 70***52 | Switch, Pressure 5bar | 2 |
C2-3-1 Motor,Starter
| 71***10 | Kit-Seal, Starter | 1 |
| 71***16 | Brush, (+)Starter | 1 |
| 71***17 | Kit-Brush Mounting, Starter | 1 |
C2-5-1 Mountings & Fittings, Alternator & Starter
| 02***88 | Bracket, Alternator Mounting | 1 |
| 02***89 | Nut | 1 |
| 02***84 | Lead, Starter Earth | 1 |
C2-4-1 Alternator
| 18***60 | Rectifier, Assembly | 1 |
| 18***50 | Fan, Alternator | 1 |
| 18***20 | Bush, Insulating | 1 |
C2-1-1 Electrical Equipment
| 70***00 | Switch, Temperature Sender, M16 | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
| 70***00 | Sensor, Engine Speed | 1 |
C2-4-2 Alternator
| 71***00 | Alternator, Assembly | 1 |
| 71***01 | Kit-Nut & Washer | 1 |
| 71***02 | Pulley, Alternator | 1 |
C3-9-1 Light, Beacon, Hazard Warning, Amber
| 70***00 | Beacon, Magnetic 24 Volt, Amber | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***02 | Bulb, 24v 70w | 1 |
C3-1-2 Right Hand Fascia, Control Monitor
| 32***34 | Vent, Heater Demister | 3 |
| 33***27 | Seal, Foam, Face Vent | 1 |
| 33***02 | Seal, Foam, Plenum | 1 |
C3-4-3 Heater, Installation, Air Conditioning
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 13***5Z | Screw, M10 X 20 | 8 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
C3-10-1 Light, Hazard Warning, Germany Only
| JH***59 | Panel, Lamp | 1 |
| JH***61 | Harness, Hazard, Indicator | 1 |
| JH***60 | Bulb | 1 |
C3-8-1 Overload Warning, System
| 13***5Z | Screw | 1 |
| 13***1Z | Nut | 1 |
| 14***11 | Seal, Bonded | 2 |
C3-5-5 Heater Assembly, Air Conditioning
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 12***49 | Clip, Outer Cable; Supercedes 69***80, San 13242 | 1 |
| 30***60 | Evaporator, Assembly | 1 |
C3-5-4 Heater Assembly
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 12***49 | Clip, Outer Cable; Supercedes 69***80, San 13242 | 1 |
| 30***66 | Heater, Assembly Cab | 1 |
C3-2-2 Switch Panels, Side Console'S
| 13***1Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 33***36 | Knob, Throttle Control; Replaces 33***11, San 12731 | 1 |
C3-11-2 Radio
| 13***3Z | Nut | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
| 71***00 | Radio, Cassette Unit, 12 Volt; Now Nla By Product Department - See Api 183 F, Or Replacement Details | 1 |
C3-4-2 Heater, Installation
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 13***5Z | Screw, M10 X 20 | 8 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
C3-12-1 Air Conditioning
| 12***99 | Compressor, 24v | 1 |
| 13***5D | Screw, Set | 2 |
| 13***5D | Screw, Set | 4 |
D Controls-Machine, Engine
D1-1-1 Controls, Excavator
| 13***3Z | Screw | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 26 |
| 13***0Z | Capscrew | 8 |
D1-3-1 Control Pedal, Brake
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Screw | 1 |
D1-4-1 Control Pedal, Forward/Reverse, & Tab Circuit
| 13***7Z | Screw | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
D2-1-1 Control, Throttle, Ams
| 13***3Z | Screw | 2 |
| 13***5Z | Screw | 2 |
| 13***8Z | Screw | 4 |
D3-1-2 Steering Column, Adjustable
| 13***7Z | Capscrew, Socket Head | 4 |
| 14***1Z | Washer, M16 Plain | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
E Hydraulics
E1-51-1 Circuit, Grab, Auxiliary, Hammer, Tab Boom
| 13***4Z | Bolt | 5 |
| 13***6Z | Bolt | 6 |
| 82***94 | Washer, Schnorr Heavy Duty M12 | 11 |
E1-11-1 Circuit, Servo, Pressure & Neutral, Fig 1
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 5 |
| 13***8Z | Bolt; Replaces Khj0716, San 14452 | 2 |
E1-2-1 Circuit, Neutral Pressure
| 13***2Z | Bolt, M12x50 | 1 |
| 13***9Z | Bolt | 2 |
| 13***1Z | Nut, M12 | 5 |
E1-53-1 Circuit, Grab, Mainframe, Tab Boom
| 13***0Z | Bolt | 4 |
| 13***0Z | Capscrew | 4 |
| 14***11 | Seal, Bonded | 1 |
E1-50-10 Circuit, Auxiliary, Hammer, Tab Boom
| 13***4Z | Bolt | 5 |
| 13***6Z | Bolt | 5 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 10 |
E1-48-10 Circuit, Non-Hbcv, Boom Position Ram
| 13***7Z | Capscrew, M8x25mm | 4 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 8 |
| 17***VZ | Nut; Replaced By 173r020vz | 4 |
E1-32-20 Circuit, Low Flow, 3.0m Dipper
| 13***0Z | Screw, M10 X 40, High Tensile | 4 |
| 13***9Z | Bolt, M12x35; Replaces 60***9r | 4 |
| 13***2Z | Bolt, M12x50 | 2 |
E1-25-1 Circuit, Boom Overload
| 13***7Z | Capscrew, M8x25mm | 2 |
| 14***11 | Seal, Bonded | 16 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-20-1 Circuit, Boom Ram, Mainframe
| 13***5Z | Bolt; Replaces 60***5r | 1 |
| 13***1Z | Nut, M12 | 1 |
| 13***8Z | Capscrew | 4 |
E1-46-1 Circuit, Dozer/Stab, Mainframe
| 13***5Z | Bolt, High Tensile | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 13***8Z | Bolt | 2 |
E1-30-11 Circuit, Hammer, Fullflow 2.5m Dipper, Mono And Tab Boom
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt | 2 |
| 81***93 | Cap, Blanking 1"Bsp, Steel | 1 |
E1-23-20 Circuit, Bucket Ram, 3.0m Dipper
| 13***4Z | Bolt | 4 |
| 13***7Z | Bolt | 4 |
| 13***6Z | Bolt | 1 |
E1-45-1 Circuit, Dozer Ram, Mainframe
| 13***5Z | Bolt, High Tensile | 2 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 13***4Z | Screw, Cap | 2 |
E1-10-1 Circuit, Drain, Motor & Solenoid
| 13***5Z | Screw, M10 X 20 | 6 |
| BR***07 | O Ring | 2 |
| C4***88 | Adapter | 1 |
E1-13-1 Circuit, Servo, Controls Side Fig 1
| 13***1Z | Screw; Replaces 60***01,60***1r | 4 |
| 13***5Z | Bolt, High Tensile | 10 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 6 |
E1-23-21 Circuit, Bucket Ram, 3.0m Dipper
| 13***4Z | Bolt | 1 |
| 13***6Z | Bolt | 1 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E1-50-1 Circuit, Grab, Auxiliary, Hammer, Tab Boom
| 13***2Z | Bolt, M12x50 | 2 |
| 13***4Z | Bolt | 5 |
| 13***6Z | Bolt | 5 |
E1-8-4 Filter, By-Pass, Hydraulic
| 32***64 | Element, Filter Bypass, Plexus | 1 |
| 32***64 | Filter, Plexus | 1 |
| 33***96 | O Ring | 1 |
E1-49-10 Circuit, Dipper Ram, Bucket Ram, Triple Articulating With Hbcv
| 13***4Z | Bolt | 6 |
| 13***4Z | Bolt; Replaces 60***14 | 4 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 1 |
E1-4-1 Circuit, Traction, Upper Chassis
| 13***9Z | Bolt; Replaces 60***09 | 2 |
| 13***1Z | Nut | 2 |
| 13***1Z | Capscrew | 8 |
E1-30-2 Circuit, Hammer, Fullflow 2.1m Dipper, Tab Boom
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt | 2 |
| 81***93 | Cap, Blanking 1"Bsp, Steel | 1 |
E1-48-20 Circuit, Hbcv, Boom Position Ram
| 13***7Z | Capscrew, M8x25mm | 4 |
| 14***11 | Seal, Bonded | 4 |
| 16***02 | Adapter, 1/4" Bsp M/M | 3 |
E1-37-1 Circuit, Combined, Hammer & Auxiliary, Mainframe
| 13***5Z | Screw, M10 X 20 | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 13***8Z | Screw | 9 |
E1-45-50 Circuit, Dozer Ram, Chassis Rear Blade, Front Stabiliser
| 13***0Z | Bolt | 5 |
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Bolt | 2 |
E1-14-1 Circuit, Brake Valve
| 13***3Z | Nut | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***1Z | Washer, M16 Plain | 4 |
E1-11-10 Circuit, Servo, Pressure & Neutral, Fig 2
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***1Z | Screw; Replaces 60***01,60***1r | 2 |
| 13***5Z | Bolt, High Tensile | 8 |
E1-30-1 Circuit, Hammer, Fullflow 2.1m Dipper, Mono Boom
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt | 2 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E1-26-1 Circuit, Dipper Ram, Hbcv Feed & Return
| 14***11 | Seal, Bonded | 4 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 1 |
| 16***52 | Adapter | 1 |
E1-15-1 Circuit, Brakes, Lower Chassis
| 13***2Z | Bolt; Replaces 60***12 | 1 |
| 13***3Z | Nut | 1 |
| 14***11 | Seal, Bonded | 1 |
E1-1-1 Circuit, Pump Suction
| 13***8Z | Capscrew, M12x30 | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 4 |
| 62***55 | Hose | 1 |
E1-48-1 Circuit, Boom Position Ram, Mainframe
| 13***7Z | Screw | 4 |
| 13***3Z | Bolt; Replaces 60***3r,60***13 | 1 |
| 13***8Z | Bolt | 2 |
E1-36-1 Circuit, Low Flow And Hammer, Options
| 13***2Z | Bolt, M12x50 | 10 |
| 13***4Z | Bolt | 8 |
| 13***5Z | Bolt; Replaces 60***5r | 2 |
E1-60-6 Quickhitch, Installation Kit
| 33***21 | Clamp, Hose (Double), Assembly | 5 |
| 33***92 | Harness, Miller Quickhitch | 1 |
| 33***96 | Hose, Assembly, Boom, Blue, 11300mm | 1 |
E1-31-10 Circuit, Hammer, Mainframe
| 13***0Z | Bolt | 2 |
| 13***4Z | Bolt | 8 |
| 13***6Z | Bolt | 10 |
E1-13-10 Circuit, Servo, Controls Side Fig 2
| 13***5Z | Screw, M10 X 20 | 2 |
| 16***02 | Adapter | 2 |
| 16***03 | Adapter | 5 |
E1-31-20 Circuit, Hammer, Boom
| 13***4Z | Bolt | 5 |
| 13***6Z | Bolt | 2 |
| 13***5Z | Bolt | 1 |
E1-38-1 Circuit, Combined, Hammer & Auxiliary Lowflow, Mainframe
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***26 | Washer, Seal | 2 |
E1-18-1 Circuit, Axle Lock
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***3Z | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
E1-35-1 Circuit, Test Points
| 14***08 | Seal, Washer | 4 |
| 16***01 | Adapter | 4 |
| 16***50 | Adapter | 4 |
E1-21-1 Circuit, Dipper & Bucket
| 13***6Z | Bolt, M12 X 70mm | 1 |
| 13***6Z | Bolt | 1 |
| 13***1Z | Nut, M12 | 1 |
E1-45-40 Circuit, Dozer Ram, Chassis, Front Blade, Rear Stabiliser
| 13***0Z | Bolt | 3 |
| 13***8Z | Screw, M10x30; Replaces 60***8r | 2 |
| 13***3Z | Bolt, M8 X 55 | 2 |
E1-30-10 Circuit, Hammer, Fullflow 2.5m Dipper, Mono Boom
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt | 2 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E1-23-1 Circuit, Bucket Ram, 2.1m Dipper
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt | 1 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E1-22-1 Circuit, Dipper Ram, Monoboom
| 13***6Z | Bolt | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 4 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 6 |
E1-32-10 Circuit, Low Flow, 2.5m Dipper
| 13***0Z | Screw, M10 X 40, High Tensile | 4 |
| 13***9Z | Bolt, M12x35; Replaces 60***9r | 4 |
| 13***2Z | Bolt, M12x50 | 2 |
E1-47-10 Circuit, Stabilisers, Front & Rear
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt | 10 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-5-1 Circuit, Traction, Lower Chassis
| 13***1Z | Capscrew | 8 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 4 |
E1-45-30 Circuit, Dozer Ram, Chassis, Rear Blade
| 13***0Z | Bolt | 2 |
| 13***4Z | Nut | 2 |
| 14***6Z | Washer, M6 | 2 |
E1-13-20 Circuit, Servo, Controls Side Fig 3
| 13***4Z | Screw, M6 X 60 | 2 |
| 14***11 | Seal, Bonded | 6 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
E1-16-1 Circuit, Gear Change
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-55-1 Circuit, Weedcutter
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 6 |
| 13***0D | Bolt, M8 X 100 | 4 |
| 13***9Z | Capscrew | 4 |
E1-49-1 Circuit, Dipper Ram, Bucket Ram, Triple Articulating Without Hbcv
| 13***4Z | Bolt | 6 |
| 13***4Z | Bolt; Replaces 60***14 | 4 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 6 |
E1-17-10 Circuit, Steering, Fig 2
| 13***3Z | Screw | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-31-2 Circuit, Hammer Line, Control
| 13***9Z | Bolt; Replaces 60***09 | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 14***11 | Seal, Bonded | 5 |
E1-31-11 Circuit, Hammer, Mainframe
| 14***29 | Seal, Dowty | 2 |
| 16***15 | Adapter | 2 |
| 69***56 | Element, Filter | 1 |
E1-50-20 Circuit, Grab, Tab Boom
| 13***2Z | Bolt, M12x50 | 12 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 12 |
| JN***73 | Clamp; Replaced By Jrj0259, San 12387 | 10 |
E1-33-1 Circuit, Hammer, Low Flow, Mono Boom
| 13***1Z | Bolt, M16x45mm | 4 |
| 13***2Z | Bolt, M12x50 | 10 |
| 13***5Z | Bolt | 1 |
E1-24-3 Circuit, Grab/Bucket, Changeover
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 5 |
| 13***1Z | Bolt; Replaces 60***1r | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-32-1 Circuit, Low Flow, 2.1m Dipper
| 13***0Z | Screw, M10 X 40, High Tensile | 4 |
| 13***9Z | Bolt, M12x35; Replaces 60***9r | 4 |
| 13***2Z | Bolt, M12x50 | 2 |
E1-30-20 Circuit, Hammer, Fullflow 3.0m Dipper, Mono Boom
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt | 2 |
| 62***47 | Hose | 1 |
E1-8-3 Circuit, Bypass, Hydraulic Filter
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***3Z | Nut | 4 |
| 32***22 | Cover, Top | 1 |
E1-17-1 Circuit, Steering, Fig 1
| 81***53 | Adapter | 2 |
| JL***37 | Hose, 3/8" X 1500; Replaces Jlv1138 And Jlv1139, Ref San09200 | 2 |
| JL***53 | Adapter, 3/8 X 3/8 | 2 |
E1-23-10 Circuit, Bucket Ram, 2.5m Dipper
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt | 1 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
E1-45-20 Circuit, Dozer Ram, Chassis, Front Blade
| 13***8Z | Screw, M10x30; Replaces 60***8r | 2 |
| 13***4Z | Nut | 2 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
E1-34-1 Circuit, Mainframe, Low Flow
| 13***0Z | Bolt | 4 |
| 13***9Z | Bolt, M12x35; Replaces 60***9r | 7 |
| 13***7Z | Capscrew | 4 |
E1-47-1 Circuit, Stabiliser, Mainframe
| 13***5Z | Bolt, High Tensile | 4 |
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 13***7Z | Bolt | 2 |
E1-30-21 Circuit, Hammer, Fullflow 3.0m Dipper, Tab Boom
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt | 2 |
| 62***47 | Hose | 1 |
E1-3-1 Circuit, Neutral, Return & Oil Cooler
| 13***9Z | Bolt | 4 |
| 13***3Z | Nut | 2 |
| 13***1Z | Nut, High Strength, M10 | 6 |
E1-19-2 Circuit, Motor Drain, Lower Chassis
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***3Z | Nut | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E1-54-1 Kit, Ball Valve, 980/89669
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 14***26 | Washer, Seal | 2 |
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
E1-6-3 Circuit, Swing
| 13***8Z | Capscrew | 8 |
| 24***01 | O Ring | 2 |
| AN***71 | Adapter | 2 |
E1-47-20 Circuit, Stabiliser, Rear
| 13***0Z | Bolt | 3 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E2-6-11 Motor, Drive, Fig 2
| 13***1Z | Capscrew | 8 |
| 20***73 | Motor, Drive, 130w 145w 160w 175w | 1 |
| 20***74 | Motor, Drive 130w 145w, 20kph Germany | 1 |
E2-1-2 Pump, Piston, Main Hydraulic, Drive Groups
| 13***9Z | Bolt, M10x35 | 8 |
| 20***17 | Pump, Main Hydraulic | 1 |
| 33***63 | Coupling, Assembly,Pump Engine, Including Bolts | 1 |
E2-1-1 Pump, Piston, Main Hydraulic, Drive Groups
| 13***9Z | Bolt, M10x35 | 8 |
| 20***16 | Pump, Main Hydraulic | 1 |
| 33***63 | Coupling, Assembly,Pump Engine, Including Bolts | 1 |
E2-7-1 Motor, Swing
| LU***58 | Bolt, Hex. Socket Head | 4 |
| LP***13 | Piston | 1 |
| LK***04 | Bush | 4 |
E2-2-1 Pump, Piston, Main Hydraulic, & Components
| 12***SN | Bolt, Eye | 2 |
| 16***VN | Nut, High, Strength | 4 |
| 16***VZ | Nut, High Strength | 4 |
E2-2-2 Pump, Piston, Main Hydraulic, & Components
| 16***VZ | Nut, High Strength | 4 |
| 20***16 | Pump, Main Hydraulic | 1 |
| 20***17 | Pump, Main Hydraulic | 1 |
E2-6-10 Motor, Drive, Fig 1
| 13***1Z | Capscrew | 8 |
| 20***73 | Motor, Drive, 130w 145w 160w 175w | 1 |
| 20***74 | Motor, Drive 130w 145w, 20kph Germany | 1 |
E3-15-2 Oils, Biodegradable, Hydraulic
| 40***23 | Fluid, Hydraulic, 25 Litres, Biodegradable, Fluid, Hydraulic, 25 Litres, Biodegradable; See Note 1. Use Up To Maximum Of 40 Degrees Centigrade Ambient Temperature. | 1 |
| 40***24 | Fluid, Hydraulic 205 Litres, Biodegradable | 1 |
E3-22-1 Valve, Stabiliser
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 4 |
| 25***41 | Valve, Stabiliser Control | 1 |
| 69***57 | Cartridge, Valve, Excl. Coil; S/S By 25/22***55, San23202 26/01/07 S L'Wood, Per Joe Vazquez.Reversed @ 31/01/07 San23160 | 4 |
E3-50-1 Valve, Brake Control
| 13***8Z | Capscrew | 3 |
| 14***7Z | Washer, Spring | 3 |
| 25***01 | Kit-Seal | 1 |
E3-13-2 Valve, Cushion
| 25***40 | Valve, Cushion; Replaces Knj2041 | 1 |
| 34***55 | Kit, Repair | 1 |
E3-2-45 Valve, Relief, Service Port
| 25***61 | Valve, Relief | 1 |
E3-33-1 Valve, Logic, 4 Stabiliser
| 13***0Z | Capscrew | 12 |
| 25***01 | Cartridge, Relief Valve | 2 |
| 25***02 | Plug, Blanking | 1 |
E3-21-2 Valve, Solenoid, Drive Axle Lock
| 25***33 | Kit, Seal | 1 |
| 25***37 | Valve, Dual Solenoid | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 2 |
E3-14-1 Coupling, Rotary
| 69***00 | Pin, Grooved | 1 |
| 69***01 | Adapter | 1 |
| 69***02 | Distributor, Assembly | 1 |
E3-10-1 Valve, Foot Control, Servo
| 69***54 | Kit-Plunger, (2 Per Kit) | 1 |
| 69***55 | Kit, Regulating, Sub Assembly | 1 |
| 69***56 | Spring, Set | 1 |
E3-2-1 Valve, Control, Components Fig 1
| LB***42 | O-Ring, O Ring | 3 |
| LB***11 | O Ring | 1 |
| LM***93 | Sleeve | 2 |
E3-23-1 Valve, Pilot Shuttle
| 25***40 | Valve, Assembly, Shuttle Sequence | 1 |
| 69***62 | Cartridge, Shuttle | 2 |
| 69***63 | Cartridge, Sequence | 1 |
E3-18-3 Valve, Transmission, Higher Road Speed
| 20***46 | Cartridge, Pressure Reducing | 1 |
| 20***47 | Cartridge, Pressure Relief | 1 |
| 25***79 | Kit-Seal | 1 |
E3-17-4 Valve, Swing Brake
| 25***02 | Kit-Seal | 1 |
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 2 |
E3-15-1 Lubricants & Filters
| 02***01 | Element, Fuel Filter, Cartridge | 1 |
| 02***81 | Element, Oil Filter, Cartridge, Element, Oil Filter, Cartridge; M/C'S Fitted With Tier 2 Engines See Footnote. M/C With T2 Engines M703785-70***87,70***90-70***93,70***95,70***96,70***23,70***25 & 70***28. | 1 |
| 32***04 | Element, Air Filter, Main | 1 |
E3-40-1 Valve, Steering
| 35***08 | Kit-Seal | 1 |
| 35***11 | O Ring | 1 |
| 35***12 | O Ring | 4 |
E3-1-1 Valve, Assembly, & Mounting
| 13***9Z | Screw | 3 |
| 13***0Z | Screw | 4 |
| 25***58 | Valve, Control Main; Replaces 25/22***67 San 13523., Replaced By 25/22***54 San 23864. | 1 |
E3-51-1 Valve, Forward/Reverse
| 25***06 | Assembly, Incl.Plunger Seals | 1 |
| 25***11 | Kit, Seal | 1 |
| JR***51 | Valve, Foot Control | 1 |
E3-6-3 Valve, Hand Control, Servo
| 16***03 | Adapter | 10 |
| 16***52 | Adaptor, 3/8bsp X 9/16 Sae | 10 |
| 25***08 | Rod, Push | 2 |
E3-2-2 Valve, Control, Components Fig 2
| 25***61 | Valve, Relief | 5 |
| 60***09 | Washer, Spring | 7 |
| 60***9Z | Washer, M12 Spring; Replaced By 14***9z, San23349 06/03/07,, S.Littlewood. Requested By Sue Chadwick. | 7 |
E3-16-10 Filter, Hydraulic, Steer Circuit
| 32***02 | Kit-Seal, Filter | 1 |
| 69***84 | Element, Steer Filter, C/W Seal | 1 |
| JL***32 | Filter, Steer | 1 |
E3-19-1 Valve, Shuttle
| 25***38 | Valve, Shuttle | 1 |
| 69***62 | Cartridge, Shuttle | 1 |
| JL***71 | Valve, Shuttle | 1 |
E3-18-2 Valve,Transmission
| 20***46 | Cartridge, Pressure Reducing | 1 |
| 20***47 | Cartridge, Pressure Relief | 1 |
| 25***40 | Valve, Cartridge, Pressure | 1 |
E3-20-1 Valve, Solenoid, Hammer Control
| 25***36 | Valve, 3 Way Solenoid | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 71***08 | Coil, 24v | 1 |
E3-18-1 Valve, Priority, 15lpm
| 25***01 | Cartridge | 1 |
| 69***78 | Valve, Cartridge, 15lpm | 1 |
| 69***79 | Solenoid, Coil | 1 |
E3-14-10 Mountings, Rotary Coupling
| 13***5Z | Screw, M12x20; Replaces 60***5r | 6 |
| 13***2Z | Bolt; Replaces 60***2r | 5 |
| 13***3Z | Nut, M16 | 3 |
E3-7-1 Valve, Foot Control, Servo
| 21***06 | Pin, Split; Replaces Lmc0060 | 2 |
| 60***05 | Capscrew | 1 |
| KN***95 | Valve, Foot, Remote Controler | 1 |
E3-8-3 Valve, Solenoid
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 8 |
| 25***59 | Solenoid, Cartridge | 8 |
E4-7-10 Ram, Position, Hbcv, Assembly
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***0Z | Bolt | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-1-60 Ram, Boom, Components, Tab Boom With H.B.C.V
| 69***93 | Kit, Seal | 1 |
| 69***94 | Kit, Repair, Cylinder Tube; Replaces 69***99 | 1 |
| 69***95 | Kit, Repair, Piston Rod; Replaces 69***98 | 2 |
E4-1-31 Ram, Boom, R.H. With H.B.C.V, Assembly Monoboom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***6Z | Bolt | 1 |
| 13***1Z | Nut | 2 |
E4-1-34 Ram, Boom, L.H. With H.B.C.V., Assembly Tab Boom
| 13***0D | Bolt | 2 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***1D | Nut, M10 | 2 |
E4-2-21 Ram, Dipper, Components
| 33***64 | Piston, Boom Ram, 11***mm | 1 |
| 33***63 | Cushion, Ring | 1 |
| 33***15 | Ram, Dipper; Replaces Jnv1013-San 12203 | 1 |
E4-1-2 Ram, Boom, Left Hand Standard, Assembly Tab Boom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Nut | 1 |
E4-3-11 Ram, Bucket, Components
| 33***14 | Ram, Bucket, 95mm Cyl X 70mm Rod; Replaces Jnv1184-San 12203, Replaces Lqu0118/Lqu0119/Lqu0124-San 12223 | 1 |
| 69***00 | Bush | 1 |
| 69***01 | Wiper, Pin, Bushing | 4 |
E4-1-41 Ram, Boom, Components
| 33***13 | Ram, Boom; Replaces Jnv1012-San 12203, Replaces Lqu0116/Lqu0120/Lqu0122-San 12223 | 1 |
| 69***93 | Kit, Seal | 1 |
| 69***96 | Kit, Repair, Cylinder Head; Replaces 69***04 | 1 |
E4-9-1 Ram, Stabiliser
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 25***00 | Cartridge | 2 |
| 25***02 | Kit-Seal; 3 O Rings And 2 Quad Rings | 1 |
E4-1-33 Ram, Boom, R.H. With H.B.C.V., Assembly Tab Boom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Nut | 1 |
E4-1-61 Ram, Boom, Components, Tab Boom With H.B.C.V
| 33***55 | Ram, Boom Lh, Tab Hbcv | 2 |
| 69***00 | Bush | 1 |
| 69***02 | Bush; Replaces Lku0079, San 12357 | 1 |
E4-1-35 Ram, Boom, R.H. With H.B.C.V., Assembly Tab Boom
| 13***0D | Bolt | 2 |
| 13***4D | Bolt, M12 X 60 | 1 |
| 13***1D | Nut, M10 | 2 |
E4-1-50 Ram, Boom, Components, Tab Boom
| 69***93 | Kit, Seal | 1 |
| 69***94 | Kit, Repair, Cylinder Tube; Replaces 69***99 | 1 |
| 69***95 | Kit, Repair, Piston Rod; Replaces 69***98 | 2 |
E4-13-1 Seal Kit, 65mm Rod X 120mm Cyl, Stabiliser Ram
| 23***07 | O Ring | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
| 24***09 | Seal, Gland, 65mm Rod | 1 |
E4-2-11 Ram, Dipper, H.B.C.V., Assembly
| 13***0D | Bolt | 2 |
| 13***9D | Bolt, M12 X 35 | 1 |
| 13***1D | Nut, M10 | 2 |
E4-6-1 Ram, Axle Lock
| 69***51 | Kit-Seal | 1 |
| 69***11 | Piston, Rod | 1 |
| 69***12 | Piston, Assembly | 1 |
E4-1-32 Ram, Boom, L.H. With H.B.C.V., Assembly Tab Boom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Nut | 1 |
E4-3-1 Ram, Bucket, Assembly
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***1Z | Bolt; Replaces 60***1r | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
E4-1-1 Ram, Boom, Left Hand Standard, Assembly Mono Boom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***6Z | Bolt | 1 |
| 13***1Z | Nut | 2 |
E4-1-42 Ram, Boom, Components
| 33***72 | Ram, Boom Mono Boom, 100x75x1561 Long | 2 |
| 69***00 | Bush | 1 |
| 69***02 | Bush; Replaces Lku0079, San 12357 | 1 |
E4-1-21 Ram, Boom, L.H. With H.B.C.V., Assembly Monoboom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***6Z | Bolt | 1 |
| 13***1Z | Nut | 2 |
E4-7-20 Ram, Position, Components
| 33***54 | Ram, Position, Seal Kit = 33***14; Replaces Jnv1078 | 1 |
| 69***05 | Ring, Guide | 1 |
| 69***06 | Ring, Snap | 1 |
E4-4-11 Ram, Dozer, Right Hand
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***22 | Spacer | 1 |
| 25***29 | Piston, Pilot, Sway Ram Noise | 1 |
E4-2-23 Ram, Dipper, Components, Standard
| 33***64 | Piston, Boom Ram, 11***mm | 1 |
| 33***63 | Cushion, Ring | 1 |
| 33***54 | Ram, Arm, Js130 | 1 |
E4-1-10 Ram, Boom, Right Hand Standard, Assembly Mono Boom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***6Z | Bolt | 1 |
| 13***1Z | Nut | 2 |
E4-1-51 Ram, Boom, Components, Tab Boom
| 33***49 | Ram, Boom, Tab Boom, 100x75x1478 Long | 2 |
| 69***00 | Bush | 1 |
| 69***02 | Bush; Replaces Lku0079, San 12357 | 1 |
E4-3-12 Ram, Bucket, Components
| 33***77 | Ram, Bucket, 95mm Cyl X 70mm Rod | 1 |
| 33***71 | Ring, Cushion | 1 |
| 69***00 | Bush | 1 |
E4-10-1 Ram, Cab Raise
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 22***30 | Circlip | 1 |
| 55***09 | Ram, Lift, 90 X 60 | 2 |
E4-10-2 Ram, Cab, Raise
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 22***30 | Circlip | 1 |
| 33***92 | Cap, End | 1 |
E4-7-1 Ram, Position, Non-Hbcv, Assembly
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***0Z | Bolt | 1 |
| 13***1Z | Nut, High Strength, M10 | 2 |
E4-2-1 Ram, Dipper, Standard, Assembly
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***9Z | Bolt, M12x35; Replaces 60***9r | 1 |
| 13***1Z | Nut | 2 |
E4-4-2 Ram, Dozer, Left Hand
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***22 | Spacer | 1 |
| 25***29 | Piston, Pilot, Sway Ram Noise | 1 |
E4-1-11 Ram, Boom, Right Hand Standard, Assembly Tab Boom
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Nut | 1 |
E4-13-2 Seal Kit, Ram, 60mm Rod X 90mm Cyl, 991/00149
| 23***55 | O Ring | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-2-22 Ram, Dipper, Components
| 33***75 | Ram, Dipper Arm; Replaced By 33***72 + 83***77 Or 83***67, 6 See San 21745 | 1 |
| 33***72 | Ram, Arm | 1 |
| 90***48 | Bush | 2 |
F Axles, Wheels, Transmission, Swing Gearbox
F1-6-1 Crown Wheel & Pinion, 15.78 : 1 Ratio, 453/30750
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***00 | Casing, Assembly, Differential | 1 |
F1-7-1 Ram, Steering Axle, Installation, 453/30750
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 45***00 | Link, Steer, Assembly | 1 |
| 45***01 | Link, Steering | 1 |
F1-4-1 Knuckle, Steering, 15.78 : 1 Ratio, 453/30750
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
| 45***61 | Trunnion | 4 |
F1-5-1 Differential, Assembly, 15.78 : 1 Ratio 453/30750
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F1-3-2 Hub & Components, Axle With Hub Brakes, 15.78 : 1 Ratio 453/30750
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F1-1-2 Axle Assembly, Front, 15.78 : 1 Ratio 453/30750
| 13***3Z | Bolt | 1 |
| 13***5Z | Bolt | 8 |
| 13***5Z | Bolt | 2 |
F2-1-2 Axle Assembly, Rear, 15.78 : 1 Ratio 450/42600
| 13***3Z | Nut, Self Lock | 8 |
| 14***2Z | Washer, M20 | 16 |
| 45***02 | Plug, Breather | 1 |
F2-3-2 Hub & Components, Axle With Hub Brakes, 15.78 : 1 Ratio 450/42600
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F2-5-1 Differential, Assembly, 15.78 : 1 Ratio 450/42600
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-6-1 Crown Wheel & Pinion, 15.78 : 1 Ratio, 450/42600
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F3-1-1 Propshafts, Transmission
| 11***25 | Strap | 4 |
| 69***03 | Flange, Yoke | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
F3-3-1 Wheels & Tyres, Duals
| 10***45 | Centering; Replaces Jla0174, San 13285 | 40 |
| 21***38 | Wheel, With Tyre, Left Hand, 10.00 X 20 Em22 16pr | 4 |
| 21***39 | Wheel, With Tyre Right Hand, 10.00 X 20 Em22 16pr | 4 |
F3-2-1 Wheels & Tyres, Singles
| 10***45 | Centering; Replaces Jla0174, San 13285 | 40 |
| 33***04 | Wheel, & Tyre Right Hand, Alliance 18-19.5 18p | 1 |
| 33***05 | Wheel, & Tyre Left Hand, Alliance 18-19.5 18p | 1 |
F3-5-2 Wheels & Tyres, Floatation, Right Hand Side Front And Rear
| 69***26 | Tyre, 600/40-22.5 18pr, Tubeless | 1 |
| 69***27 | Wheel, 20/22.5, H2 10/335 | 1 |
| 69***28 | Valve, Tubeless | 1 |
F3-5-1 Wheels & Tyres, Floatation, Left Hand Side Front And Rear
| 69***26 | Tyre, 600/40-22.5 18pr, Tubeless | 1 |
| 69***27 | Wheel, 20/22.5, H2 10/335 | 1 |
| 69***28 | Valve, Tubeless | 1 |
F4-5-1 Circuit, Swing Ring Greasing
| 13***1Z | Screw; Replaces 60***01,60***1r | 2 |
| 14***6Z | Washer, Spring | 2 |
| JH***37 | Nipple, Grease, Straight | 3 |
F4-3-1 Motor, Swing
| 13***5Z | Screw, M12x20; Replaces 60***5r | 3 |
| 13***3Z | Bolt, M16x55 | 36 |
| 13***4Z | Bolt; Replaces 60***14 | 9 |
F4-4-2 Gearbox, Swing
| 20***06 | Plug | 1 |
| 20***42 | Plug | 1 |
| 20***43 | Plug | 1 |
F5-12-1 Gearbox Output, Group
| 04***01 | Plate, Oil | 1 |
| 04***02 | Cover | 1 |
| 04***03 | Gear, Helical | 1 |
F5-9-1 Gearbox Disconnect, Group
| 04***22 | Bolt | 1 |
| 10***08 | Gear, Selector, Fixed | 1 |
| 10***09 | Circlip | 1 |
F5-11-1 Gearbox Gearshift, Sensor Group
| 04***22 | Plug | 1 |
| 10***02 | Spring | 1 |
| 10***03 | Plug | 1 |
F5-2-1 Gearbox Housing, Group
| 04***73 | Plug | 2 |
| 04***94 | Ring, Seal; Superseded By 10/90***06 See San 20236 | 1 |
| 04***95 | Plug | 1 |
F5-8-1 Gearbox Planet Drive, Group
| 10***89 | Circlip | 3 |
| 10***90 | Washer, A=3,0 | 0 |
| 10***92 | Washer, A=3,15 | 0 |
F5-5-1 Gearbox Input Shaft, Group
| 10***60 | Circlip | 1 |
| 10***08 | Ring, Piston | 2 |
| 10***09 | Gasket | 1 |
F5-6-1 Gearbox Clutch Disc, Group
| 10***72 | Disc, Clutch, S=1,6 | 0 |
| 10***58 | Piston | 1 |
| 10***59 | Spring, Cup | 1 |
F5-13-1 Drive Housing
| 04***02 | Cover | 1 |
| 10***39 | O Ring | 1 |
| 10***15 | Screw | 15 |
F5-7-1 Gearbox Brake Disc, Group
| 04***61 | Washer | 1 |
| 10***74 | Piston | 1 |
| 10***75 | Spring, Cup | 1 |
F5-10-1 Gearbox Drive Gear, Group
| 10***91 | Circlip | 1 |
| 10***80 | Circlip | 1 |
| 10***27 | Circlip | 1 |
F5-1-1 Transmission, Powershift
| 13***1Z | Bolt, M16x45mm | 3 |
| 13***1Z | Bolt | 3 |
| 13***5Z | Bolt | 3 |
F5-4-1 Gearbox, Input Housing, Group
| 04***73 | Plug | 1 |
| 10***44 | O Ring | 1 |
| 10***00 | Housing, Input | 1 |
F5-3-1 Gearbox Oil Pipes, Group
| 10***44 | O Ring | 1 |
| 10***54 | O Ring | 1 |
| 10***55 | Bolt, Banjo | 1 |
R Engine 4bg1-Tra04, Tier 2 Emissions
R1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***08 | Key | 2 |
| 02***05 | Pin, Gudgeon | 4 |
| 02***06 | Bush, Small End | 1 |
R1-5-1 Fans, Pulleys, & Fan Belt
| 02***14 | Pulley, Waterpump | 1 |
| 02***15 | Fan, Cooling | 1 |
| 02***97 | Spacer, Fan-Pulley | 1 |
R1-6-1 Timing Case
| 02***54 | Cover, Inspection | 2 |
| 02***19 | Casing, Timing | 1 |
| 02***21 | Pin, 11odx8 | 1 |
R1-1-1 Engine, Complete
| 01***94 | Engine, Complete, 4bg1t, Turbocharged, 70kw | 1 |
| 01***02 | Engine, Complete Tier 2, 4bg1tra-04 | 1 |
R1-8-1 Engine Mountings
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, Hex. Head | 1 |
| 13***3Z | Bolt, M16 X 260 | 1 |
R1-1-2 Engine, Complete
| 01***95 | Engine, Complete 4bg1, Turbocharged, 109bhp | 1 |
| 01***04 | Engine, Complete, 4bg1tra-05 | 1 |
R1-5-2 Fans,Pulleys, & Fan Belt, Eu Only
| 02***99 | Belt, Fan, (Pair), L=1256 | 1 |
| 02***86 | Bush | 1 |
| 02***28 | Pulley, Water Pump | 1 |
R1-7-1 Flywheel & Housing
| 01***00 | Bolt, Bolt; Cover To Hsg; M14x50 | 2 |
| 01***50 | Bolt, Bolt; Cover To Hsg; M14x65 | 4 |
| 02***28 | Housing, Flywheel | 1 |
R1-3-1 Block Assembly
| 02***07 | Bolt, L=56 | 2 |
| 02***12 | Dowel | 1 |
| 02***61 | Tube | 0 |
R1-6-2 Camshaft & Gears
| 02***09 | Washer, Cam | 1 |
| 02***37 | Camshaft | 1 |
| 02***27 | Gear, Idler | 1 |
R2-3-1 Rocker Cover
| 02***78 | Seal, Oil Filler Cap | 1 |
| 02***79 | Cap, Engine Oil Filler | 1 |
| 02***31 | Cover, Rocker | 1 |
R2-1-1 Cylinder Head
| 02***55 | Guide Valve Inlet & | 8 |
| 02***31 | Seal, Valve Guide | 8 |
| 02***34 | Gasket, Cylinder Head | 1 |
R2-2-1 Rocker Assembly, Inlet/Exhaust Valves, Push Rods & Tappets
| 02***77 | Spring, Rocker Shaft | 3 |
| 02***29 | Valve, Inlet | 4 |
| 02***30 | Valve, Exhaust | 4 |
R2-4-1 Lifting Plates, Engine
| 02***17 | Bolt, Flange M10x20 | 4 |
| 51***40 | Bracket, Lifting, Front | 1 |
| 91***50 | Hanger; Eng,Rr, Bracket, Lifting, Rear | 1 |
R3-1-1 Manifold, Induction
| 02***35 | Nut | 4 |
| 02***36 | Gasket | 1 |
| 02***11 | Bolt, Flange Head, M8 X 25mm | 4 |
R3-1-2 Manifold, Induction
| 02***35 | Nut | 4 |
| 02***36 | Gasket | 1 |
| 02***11 | Bolt, Flange Head, M8 X 25mm | 4 |
R3-2-1 Manifold, Exhaust
| 02***38 | Nut | 8 |
| 02***45 | Stud | 4 |
| 89***40 | Bolt; Exh Manif; M8x63 W/Pl Washer, Bolt, L=63, Bolt; M8 X 63 | 2 |
R3-4-1 Exhaust System
| 13***9Z | Bolt; Replaces 60***09 | 3 |
| 13***1Z | Nut | 6 |
| 22***01 | Clip, Jubilee | 1 |
R3-3-1 Filter, Air
| 13***9Z | Bolt, M8 X 35mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
R4-5-1 Radiator, Hoses & Fittings
| 13***3Z | Screw, M5 X 16 | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 21***52 | G.A, Radiator & Oil Coole | 1 |
R4-4-1 Cooler Assembly
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 13***7Z | Bolt | 4 |
R4-3-1 Radiator, Fittings & Mountings
| 13***7Z | Bolt | 8 |
| 13***5Z | Screw, M12x20; Replaces 60***5r | 2 |
| 13***0Z | Bolt | 3 |
R4-2-1 Thermostat, Housing, Inlet & Outlet
| 02***92 | Thermostat | 1 |
| 02***36 | Gasket | 1 |
| 02***71 | Bolt, Flange M10x30 | 1 |
R4-1-2 Pump, Water, Heavy Duty
| 02***08 | Gasket, Cover To Body | 1 |
| 02***09 | Cover, Water Pump | 1 |
| 02***06 | Kit-Repair, Water Pump | 1 |
R4-1-1 Pump, Water
| 02***41 | Gasket | 1 |
| 02***01 | Shaft | 1 |
| 02***81 | Kit-Repair, Water Pump | 1 |
R5-5-1 Cooler, Oil
| 02***65 | Cooler, Oil, Assembly | 1 |
| 02***66 | Element, Oil Cooler | 1 |
| 02***67 | Plug | 1 |
R5-6-1 Pipes, Oil
| 02***68 | Pipe, Assembly | 1 |
| 02***69 | Pipe, Assembly | 1 |
| 02***93 | Bolt, Flange Head, M8 X 20 | 3 |
R5-1-1 Sump, Oil, & Fittings
| 02***47 | Sump, Assembly | 1 |
| 02***49 | Dipstick | 1 |
| 02***51 | Tube, Dipstick | 1 |
R5-4-1 Filter, Oil
| 02***61 | Gasket | 1 |
| 02***39 | Bolt, Flange Head, M10 X 35mm | 2 |
| 02***81 | Element, Oil Filter, Cartridge, Element, Oil Filter, Cartridge; M/C'S Fitted With Tier 2 Engines See Footnote. M/C With T2 Engines M703785-70***87,70***90-70***93,70***95,70***96,70***23,70***25 & 70***28. | 1 |
R5-2-1 Pump, Oil
| 02***52 | Cover | 1 |
| 02***53 | Gear, Pump Drive | 1 |
| 02***54 | Gear, Pump Drive | 1 |
R5-6-2 Pipes, Oil
| 02***68 | Pipe, Assembly | 1 |
| 02***93 | Bolt, Flange Head, M8 X 20 | 3 |
| 02***94 | Bolt, Flange Head, M8 X 35 | 1 |
R6-5-1 Injectors, Fuel
| 10***20 | Gasket; Plug,Hsg; Id=8.2 Od=13.2, Gasket; Joint Bolt,Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Engine), Gasket, Washer, Seal, Gasket; Return Pipe,Nozzle Holder; Also Included In Gasket Set(Engine), Gasket; Return Pipe,Nozzle Holder; Id=8.2 Od=13.2, Gasket; Joint Bolt,Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Eng. & Head), Gasket; Return Pipe,Nozzle Holder; Also Included In Gasket Set(Eng. & Head), Bolt; Injector Nozzle Mounting, Bolt; (I.D. 8.2mm, O.D. 13.2mm), Bolt, Gasket; Eye Bolt Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Eng. & Head) | 2 |
| 10***71 | Bolt; Joint,Leak Off Pipe; M8x18 Flange, Bolt; M8 X 18, Bolt, Banjo, Bolt; Joint,Leak Off Pipe, Bolt; Joint,Leak Off Pipe; M8x18, Bolt; Eye Leak Off Pipe; M8x18 Flange, Bolt; Eye; M8x18 Flange, Bolt; Eye,Nozzle Holder | 1 |
| 17***00 | Injector, Assembly | 6 |
R6-1-1 Pump, Fuel Injection, Installation
| 02***15 | Gasket, Inj/Pump To T/Case | 1 |
| 02***30 | Washer | 1 |
| 02***71 | Bolt, L=22 | 1 |
R6-6-2 Filter, Fuel Sediment
| 32***08 | Bowl, Assembly | 1 |
| 32***33 | Seal, O'Ring | 1 |
| 32***57 | Filter, Fuel Sediment, Assembly | 1 |
R6-5-2 Injectors, Fuel
| 10***20 | Gasket; Plug,Hsg; Id=8.2 Od=13.2, Gasket; Joint Bolt,Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Engine), Gasket, Washer, Seal, Gasket; Return Pipe,Nozzle Holder; Also Included In Gasket Set(Engine), Gasket; Return Pipe,Nozzle Holder; Id=8.2 Od=13.2, Gasket; Joint Bolt,Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Eng. & Head), Gasket; Return Pipe,Nozzle Holder; Also Included In Gasket Set(Eng. & Head), Bolt; Injector Nozzle Mounting, Bolt; (I.D. 8.2mm, O.D. 13.2mm), Bolt, Gasket; Eye Bolt Leak Off Pipe; Id=8.2 Od=13.2 Also Included In Gasket Set(Eng. & Head) | 2 |
| 10***71 | Bolt; Joint,Leak Off Pipe; M8x18 Flange, Bolt; M8 X 18, Bolt, Banjo, Bolt; Joint,Leak Off Pipe, Bolt; Joint,Leak Off Pipe; M8x18, Bolt; Eye Leak Off Pipe; M8x18 Flange, Bolt; Eye; M8x18 Flange, Bolt; Eye,Nozzle Holder | 1 |
| 17***00 | Injector, Assembly | 6 |
R6-1-2 Pump, Fuel Injection, Installation
| 02***15 | Gasket, Inj/Pump To T/Case | 1 |
| 02***30 | Washer | 1 |
| 02***71 | Bolt, L=22 | 1 |
R6-8-2 Pump, Fuel Lift
| 11***20 | Bolt, Bolt; Eye,Fuel Inl,Inj Pump, Bolt, Banjo, Bolt; Eye,Fuel Outlet,Feed Pump | 1 |
| 11***10 | Gasket; Eye Bolt,Inj Pump, Gasket, Gasket; Eye Bolt,Outlet,Fuel Feed Pump, Gasket; Overflow Vlv,Inj Pump, Gasket; Eye Bolt,Inl,Fuel Feed Pump | 4 |
| 11***30 | Adapter Fitting, Adapter, Check, Valve, Adapter; Eye Bolt,Fuel Feed Pump | 1 |
R6-2-2 Fuel System
| 02***38 | Clip | 3 |
| 02***35 | Nut | 4 |
| 02***12 | Pipe, Fuel | 1 |
R6-4-1 Fuel Pipes, Fuel Tank To Filter
| 13***5Z | Screw, M10 X 20 | 2 |
| 14***11 | Seal, Bonded | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
R6-2-1 Fuel System
| 02***38 | Clip | 3 |
| 02***35 | Nut | 4 |
| 02***83 | Pipe, Fuel Leak-Off | 1 |
R6-7-1 Filter, Fuel
| 02***01 | Element, Fuel Filter, Cartridge | 1 |
| 02***73 | Bolt, Flange Head, M10 X 30mm | 2 |
| 02***17 | Bolt, Flange M10x20 | 2 |
R6-6-1 Filter, Fuel Sediment
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***07 | Washer, Locking | 1 |
R6-1-3 Pump, Fuel Injection, Governor,Fuel Pump, Service Parts
| 10***30 | O-Ring, Gasket; Fuel Feed Pump,Inj Pump, O Ring, O-Ring; (Sub For Gv10976) | 1 |
| 11***30 | Screw, Screw; Cover To Hsg | 2 |
| 11***20 | Bolt, Bolt; Eye,Fuel Inl,Inj Pump, Bolt, Banjo, Bolt; Eye,Fuel Outlet,Feed Pump | 1 |
R6-8-1 Pump, Fuel Lift
| 11***20 | Bolt, Bolt; Eye,Fuel Inl,Inj Pump, Bolt, Banjo, Bolt; Eye,Fuel Outlet,Feed Pump | 1 |
| 11***30 | Adapter Fitting, Adapter, Check, Valve, Adapter; Eye Bolt,Fuel Feed Pump | 1 |
| 11***20 | Gasket; Piston Plug,Fuel Feed Pump, Gasket | 1 |
R6-1-4 Pump, Fuel Injection, Governor,Fuel Pump, Service Parts
| 10***30 | O-Ring, Gasket; Fuel Feed Pump,Inj Pump, O Ring, O-Ring; (Sub For Gv10976) | 1 |
| 11***30 | Screw, Screw; Cover To Hsg | 2 |
| 11***50 | Gasket; Plug To Hsg, O Ring | 1 |
R7-3-1 Compressor, & Installation, Air Conditioning
| 12***99 | Compressor, 24v | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***1D | Nut, M10 High Strength | 2 |
R7-1-2 Turbocharger
| 02***80 | Turbocharger, Assembly | 1 |
| 02***15 | Ring, Snap Blower | 1 |
| 89***70 | Housing, Centre Assembly | 1 |
R7-1-1 Turbocharger
| 02***04 | Turbocharger | 1 |
| 02***13 | Clamp, Turbo Housing | 1 |
| 02***14 | Housing, Centre Assembly | 1 |
R7-2-1 Turbo, Pipework
| 02***87 | Gasket | 1 |
| 02***73 | Bolt, Flange Head, M10 X 30mm | 1 |
| 02***78 | Bolt, Flange Head, M6 X 16 | 2 |
R8-1-1 Gasket Set, Overhaul, Top
| 02***05 | Kit-Top Gasket | 1 |
R8-2-1 Kit, Piston & Liner
| 02***67 | Kit-Piston & Liner | 1 |
R8-1-2 Gasket Set, Overhaul
| 02***06 | Kit-Gasket, Bottom | 1 |
JS130W-T2(WHEELED) serial number reference
For wheeled excavators, the machine identification plate is located at the front right side of the superstructure, underneath the cab. The serial number (PIN/VIN) is also stamped on the right side of the chassis near the boom joint. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 0716500-0717236 | JCB JS130W (Wheeled Excavator) - Service Manual Publication the OEM part reference | |
| 0717003 | JCB JS130W (Wheeled Excavator) - Service Manual Publication the OEM part reference | |
| 01060300-01060999 | JCB JS130W (Wheeled Excavator) - Service Manual Publication the OEM part reference |
Frequently asked questions
What engine does the JS130W-T2 use?
The JS130W-T2 uses a turbocharged Isuzu engine with net power ranging from 63 kW (85 hp) to 69 kW (92 hp) depending on the configuration.
What is the operating weight?
The operating weight ranges from 12,700 kg to 14,960 kg, varying by bucket and wheel configuration.
What replaced the JS130W-T2?
The JS130W-T2 was succeeded by the JS130W-T3 generation within the JS series wheeled excavator lineup.
What JS130W-T2(WHEELED) owners discuss
What engine powers the JS130W-T2, and what are the common power loss symptoms reported by operators?
The JS130W-T2 is powered by an Isuzu 4JJ1X engine. Operators report that when the engine is warm, it loses power and chokes out black smoke. The issue often resolves temporarily after cooling for 30 minutes, only to recur after approximately 15 minutes of operation. This pattern suggests potential turbocharger bearing wear or restricted airflow, as indicated by checks for axial/radial movement in the turbo wheel.
What hydraulic behaviors are typical for the JS130W-T2, specifically regarding dipper function?
Operators have reported weak dipper functions on JS130 models, particularly on units with high hour counts (e.g., 3,200 hours). While travel speed and slew functions may remain responsive, the dipper circuit often shows reduced performance, indicating potential wear in the main pump, swing motor, or hydraulic control valves specific to that circuit.
What are the known undercarriage or wear patterns for wheeled variants of this machine?
For wheeled configurations, the drive motors are face-mounted to the side plates with the nose extending into the box section of the frame. A common wear pattern involves damage to these drive motors and associated drive components if the drive chain tension is not properly adjusted. Loose chains can hammer the motors and other drive components during operation.
What electrical or sensor issues are common on the JS130 series?
Electrical faults are a frequent issue, particularly related to the forward/reverse actuation system. On similar JCB models, intermittent operation is often caused by microswitches in the forward/reverse lever failing to activate the hydraulic solenoids on the transmission body. Additionally, starting issues may trigger error code ENG P0380, which is associated with engine sensor faults, potentially requiring inspection of the fuel temperature sensor or rail pressure sensor circuits.
What is the maximum operating weight for the JS130W-T2, and how does it vary?
The maximum operating weight for the JS130W is 14,960 kg. This weight applies to the machine equipped with an excavating bucket and dual wheels. For configurations with single wheels, the weight is reduced by 400 kg. Variations may occur based on the specific dipper length (2.10 m, 2.50 m, or 3.00 m) and counterweight configuration.
What fluid specifications are recommended for the JS130W-T2 hydraulic and engine systems?
JCB recommends using JCB HD90 Gear Oil for the slew gearbox and track gearboxes (if applicable to specific sub-variants). For the engine, JCB 15W/40 Multigrade oil is specified for temperatures between -10°C and 50°C. The hydraulic system and transmission utilize a multipurpose oil suitable for naturally aspirated or turbocharged engines, transmissions (including wet brake systems), and hydraulics. Coolant must be changed at recommended intervals to prevent silicate separation, which causes brown sludge in the expansion bottle.
What should be checked when buying a used JS130W-T2?
When inspecting a used JS130W-T2, verify the drive chain tension to prevent motor damage, check the turbocharger for axial/radial play if power loss symptoms are present, and test the forward/reverse microswitches for intermittent operation. Additionally, confirm the serial number range (e.g., OEM part reference to OEM part reference) to ensure correct fluid capacities and part compatibility. Have your dealer verify the engine sensor status and hydraulic pump performance before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb JS130W-T2(WHEELED). Related factory variants of the same model family:
JS130W T2(WHEELED)JS130W-T2(WHEELED)
Need a specific JS130W-T2(WHEELED) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.