Jcb G88
Maintenance schedule, common problems & OEM parts breakdown
The JCB G88 is a compact crawler excavator produced by JCB Construction Machinery. The machine utilizes a JCB Dieselmax engine, specifically the 4-cylinder Dieselmax 7.2 Litre CRDI variant found in the JS385LC class, delivering approximately 212 kW (284 hp) and 1150 Nm of peak torque. Operating weight ranges from 37,331 kg to 38,027 kg depending on configuration. The G88 belongs to the JS-series tracked excavator lineage, succeeding earlier 800-series mini-excavators and preceding the modern JS-series heavy excavators. Configurations offered include standard and HD track frames, varying bucket capacities (1.4m³–2.3m³), and optional belly guards for rotary coupling protection.
Across the JS-series generations, JCB shifted from Tier 2/Stage II emissions packages to advanced Dieselmax CRDI engines that eliminate the need for DEF or DPF regeneration, allowing for extended 500-hour engine oil intervals. This maintenance advantage, combined with ground-level access for daily fluid checks and a low center of gravity for stability, makes the G88 and its JS-series siblings highly valued in the used market for utility and municipal work. The machine's robust hydraulic system, featuring high bucket tearout force (262.7 kNm in the 385LC class) and accumulator-assisted boom/arm lowering, ensures productivity in tough strata while reducing component stress.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb G88 specifications
Engine
| Model | JCB 430 |
| Displacement | 3000 cc |
| Cylinders | 4 (Inline) |
| Gross Power | 37 kW (49 hp) @ 2050 rpm |
| Net Power | 36 kW (49 hp) @ 2000 rpm |
| Emissions Tier | CEV Stage V |
Weights
| Operating Weight | 7200 kg (15,873 lb) |
| Operating Weight (Alternative Source) | 7510 kg (16,557 lb) |
Dimensions
| Transport Length | 5900 mm (19 ft 4 in) |
| Width Over Bucket | 2350 mm (7 ft 9 in) |
| Height to Top of Cabin | 2870 mm (9 ft 5 in) |
| Wheelbase | 2170 mm (7 ft 1 in) |
| Minimum Ground Clearance | 310 mm (1 ft 0 in) |
| Front Track Width | 1860 mm (6 ft 1 in) |
| Rear Track Width | 1730 mm (5 ft 8 in) |
Performance
| Max Dig Depth | 4770 mm (15 ft 8 in) |
| Max Working Height | 5970 mm (19 ft 7 in) |
| Max Load Over Height | 4180 mm (13 ft 9 in) |
| Max Lift Capacity | 1490 kg (3,285 lb) |
| Dipper Tear Out Force | 3257 kgf (7,181 lbf) |
| Turning Circle Diameter (Outside Bucket) | 11600 mm (38 ft 1 in) |
| Turning Circle Diameter (Outside Bucket, Not Braked) | 8640 mm (28 ft 4 in) |
Service Capacities (summary)
| Fuel Tank | 128 L (33.8 gal) |
| Hydraulic Oil (System) | 110 L (29.1 gal) |
| Hydraulic Oil (Replacement) | 92 L (24.3 gal) |
| Engine Oil | 15 L (4.0 gal) |
| Coolant | 16.5 L (4.4 gal) |
| Transmission Oil | 17.5 L (4.6 gal) |
| Rear Axle | 20 L (5.3 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb G88 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the G88 beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic, axle, and final drive systems to establish a baseline. JCB’s Dieselmax engines do not use DEF or DPF, allowing 500-hour oil changes with JCB Engine Oil Special or equivalent 15W-40 diesel oil. Inspect the hydraulic return filter magnet for metallic debris before disposal. At 1000 hours, interpret hydraulic samples against the 500-hour baseline to extend or compress future intervals. Regular oil analysis is critical for catching developing bearing or seal issues 500–800 hours before failure.
Corrective & Common Repairs
Common failures involve dirty fuel clogging common-rail injectors on Dieselmax engines; replace primary and secondary fuel filters at 500-hour intervals. Check turbocharger shaft play, boot condition, and wastegate function at 1000 hours. Inspect hoses and cylinders for chafing, pinhole seepage, and rod scoring. Verify slew ring bolt torque on JS-series excavators as a critical safety item. Load test the alternator and starter at 1000 hours to prevent electrical strand-outs. Ensure all pin points are greased to prevent premature wear on boom, arm, and bucket pivots.
Overhaul & Rebuild Points
The 2000-hour service is the primary overhaul milestone. Change hydraulic oil, clean the hydraulic tank, and refill with JCB-spec oil. Measure swing ring play (radial and axial) using dial indicators on JS-series excavators. Inspect structural components including the boom, arm, chassis, and side frames for cracking or unauthorized welding. Service brakes, checking disc wear and immersed brake condition. Check injector spray patterns via the JCB ServiceMaster diagnostic tool and replace as required. Perform a complete electrical system test to identify intermittent issues.
Seasonal & Environment Servicing
JCB’s cab and access design places fluid gauges and drain points at ground level for daily checks in all conditions. In cold weather, use JCB OAT coolant for freeze protection and heat transfer efficiency. Check track tension and roller condition on JS excavators to prevent damage in muddy or rocky terrain. Inspect belly guards protecting the rotary coupling and hoses from debris. Ensure the accumulator functions correctly to relieve hydraulic pressure for safe parking. Verify ROPS/FOPS integrity and backup alarm operation for worksite safety.
G88 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 320/04114 | Retainer, Fuel Filter | Fuel system service | Check fitment → |
| 320/07155 | Filter, Fuel - 5 Micron, Self Colour Can | Fuel system service | Check fitment → |
| 32/925705 | Element, Fuel Sediment/Water, 150 Microns | Fuel system service | Check fitment → |
| 32/925694 | Element, Fuel Filter | Fuel system service | Check fitment → |
| 32/925717 | Filter, Fuel Sediment, 30 Micron | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
G88 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Fuel filter blockage or lift pump failure | Check fuel filters and pump operation |
| P0112 | Intake air temperature sensor malfunction (low voltage error) | Ground fault or short circuit in sensor circuit | Inspect sensor wiring and connectors for damage |
| P0117 | Engine coolant temperature sensor circuit low voltage | Sensor circuit short to ground or low coolant level | Check coolant level and sensor electrical connections |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty sensor or low oil pressure | Verify oil pressure with mechanical gauge and check sensor |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Open circuit in reductant injector wiring | Inspect injector harness and connections for damage |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus communication failure or power issue | Check battery voltage, ground straps, and CAN bus wiring |
| 101 | Low transmission clutch pressure detected | Transmission hydraulic pressure fault | Check transmission fluid level and pressure sensors |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Faulty crank sensor or wiring issue | Inspect crank sensor and associated wiring harness |
| P0102 | MAF Sensor Low Voltage Fault | Mass Air Flow sensor circuit low voltage | Check MAF sensor connections and intake system |
| P0103 | MAF Sensor High Voltage Fault | Mass Air Flow sensor circuit high voltage | Check MAF sensor connections and intake system |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
G88 attachments & work tools
Buckets
Available in Deep Profile, Ditch Maintenance, Grading, Heavy Duty, Jaw, Ribbed, Tapered Ditching, and Tilting Grading configurations to improve productivity and material retention. Specific widths range from 160 mm to 760 mm (6 in to 30 in) for digging, with additional 900 mm and 1000 mm (35 in and 39 in) options for ditching and grading tasks.
Hydraulic Breakers
OEM breaker range designed to operate in harmony with JCB carriers, providing sustained crushing action for soft and hard rock applications. The system utilizes heavy-duty flywheel storage energy to maximize hydraulic power and includes extended-life pivot pins to eliminate hammering during attachment changeover.
Earth Drills / Augers
Designed for erecting fencing, telegraph poles, anchors, road signs, and planting trees. Each unit includes a hanger bracket and connection hoses, with quickhitch compatibility allowing for fast changeover to minimize downtime.
Grabs and Grapples
Includes Power Grabs with redesigned capabilities and Shear Grabs featuring hardox or forged tines for cutting grass and maize silage. Single and twin bale spikes are available for efficient handling of agricultural bales.
Lifting Equipment
Compact lifting gear with a capacity range of 0.15 to 4 tonnes for safe suspended load handling. Features a Q-Fit pick-up system to ensure easy attachment to the machine and improved operator visibility.
Sweepers
Specialist sweepers designed for highly effective cleaning on job sites to increase machine versatility. Options include sweeper collectors compatible with the base machine's hydraulic system.
Forks and Fork Frames
Pallet forks and fork frames engineered for material handling applications. Designed to connect easily to the carrier, providing long-lasting durability and peak performance for load handling tasks.
Coupler / Mounting Systems
Attachments attach using standard couplers or quick couplers, with quickhitch systems enabling fast changeover. Q-Fit pick-up systems are utilized for lifting equipment to ensure easy attachment.
Hydraulic Kit / Arrangement Notes
Earth drills come complete with connection hoses for hydraulic operation. Breakers utilize the machine's hydraulic power via a heavy-duty flywheel storage system. Safety hydraulic valves block mixing hydraulically if the grid is open on specific bucket configurations.
Notable Factory Configurations / Guarding
Belly guards are fitted at the lower frame to protect rotary coupling and hoses. Accumulators help relieve hydraulic pressure for safer parking. Cab options include fully glazed TOPS certified cabs with JCB Impact Protection front screens and FOGS roof guards.
All G88 assemblies by section
Every catalogued assembly group for the Jcb G88. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Z Electrical Power Generation, Unit
Z0-7-1 Generator Set, G88 80kva, 50hz 380/415v Prime
| 32***24 | Jcb, Generator G88q, 80kva | 1 |
Z0-6-1 Generator Set, G80r 80kva, 50hz 380/415v Prime
| 32***23 | Jcb, Generator G80r, 80kva | 1 |
Z0-4-1 Generator Set, G63 60kva, 50hz 380/415v Prime
| 32***21 | Jcb, Generator G63, 60kva | 1 |
Z0-2-1 Generator Set, G55 50kva, 50hz 380/415v Prime
| 32***19 | Jcb, Generator G55, 50kva | 1 |
Z0-3-1 Generator Set, G55q 50kva, 50hz 380/415v Prime
| 32***20 | Jcb, Generator G55q, 50kva | 1 |
Z0-5-1 Generator Set, G63q 60kva, 50hz 380/415v Prime
| 32***22 | Jcb, Generator G63q, 60kva | 1 |
Z0-1-1 Generator Set, G50r 50kva, 50hz 380/415v Prime
| 32***18 | Jcb, Generator G50r, 50kva | 1 |
Z0-8-1 Generator Set, G88q 80kva, 50hz 380/415v Prime
| 32***25 | Jcb, Generator G88q, 80kva | 1 |
Z1-2-1 Engine, Complete, 320/50015
| 32***60 | G.A, Power Take-Off Blanking Plate, Sae | 1 |
| 32***20 | Fan, Idler Bracket, No Aircon 1.16+1.25 | 1 |
| 32***23 | G.A, Engine Dipstick | 1 |
Z1-1-1 Engine, Complete, 320/50014
| 32***60 | G.A, Power Take-Off Blanking Plate, Sae | 1 |
| 32***20 | Fan, Idler Bracket, No Aircon 1.16+1.25 | 1 |
| 32***23 | G.A, Engine Dipstick | 1 |
Z2-2-1 Sealant Templates
| 89***49 | Template, Oil Pan Sealant | 1 |
| 89***75 | Template, Sealant, Bedplate To Block | 1 |
| 89***77 | Template, Sealant, Flywheel, Housing To Gearcase | 1 |
Z2-1-1 Service Tools
| 32***20 | Bracket, Engine Lifting | 1 |
| 89***46 | Tool, Fitting, Core Plug | 1 |
| 89***47 | Tool, Crankshaft Turning | 1 |
Z3-1-1 Lubricants Primers, & Sealants
| 32***28 | Sealant, 620 | 0 |
| 32***29 | Lubricant, O Ring, P80 | 0 |
| 32***30 | Sealant, 5900 | 0 |
Z4-2-1 Gasket Set, Top Overhaul
| 32***08 | Gasket, Cylinder Head | 1 |
| 32***33 | Seal, Valve Stem | 16 |
| 32***40 | O Ring | 1 |
Z4-4-1 Seal Kit, Oil Pan
| 32***30 | Sealant, 5900 | 1 |
| 32***50 | O Ring | 2 |
| 32***62 | Seal, Oil-Pick-Up | 1 |
Z4-3-1 Gasket Set, Bottom Overhaul
| 32***31 | Sealant, 518 | 1 |
| 32***29 | Seal, Rear Oil | 1 |
| 32***19 | Seal, Front Oil | 1 |
Z4-1-1 Seal Kit, Rocker Cover
| 32***92 | O Ring, Oil Filler Cap | 1 |
| 32***87 | Cap, Fuel Injector | 4 |
| 32***88 | Cap, Fuel Pipe | 8 |
Z4-5-1 Gasket Set, Top Overhaul, Tc
| 32***08 | Gasket, Cylinder Head | 1 |
| 32***33 | Seal, Valve Stem | 16 |
| 32***40 | O Ring | 2 |
Z5-4-1 Engine, Long, Tc 320/40081
| 32***32 | Gear, Crankshaft, Assembly | 1 |
| 32***43 | Kit-Gasket, Long Engine, Tc/Tca | 1 |
| 32***03 | Piston, & Con-Rod, Assembly | 1 |
Z5-5-1 Kit-Engine Overhaul, Standard
| 32***40 | Bolt, Con-Rod, M8 X 57 | 8 |
| 32***10 | Kit-Piston, Standard, Naturally Aspirated | 4 |
| 32***16 | Kit-Top Gasket, Naturally Aspirated | 1 |
Z5-2-1 Engine, Short, Tc 320/40060
| 32***29 | Seal, Rear Oil | 1 |
| 32***19 | Seal, Front Oil | 1 |
| 32***17 | Kit-Top Gasket, Turbo Engine | 1 |
Z5-6-2 Kit-Engine Overhaul, Oversize - 0.50mm, Tc
| 32***40 | Bolt, Con-Rod, M8 X 57 | 8 |
| 32***17 | Kit-Top Gasket, Turbo Engine | 1 |
| 32***18 | Kit-Bottom Gasket | 1 |
Z5-3-1 Engine, Long, 320/40061
| 32***32 | Gear, Crankshaft, Assembly | 1 |
| 32***42 | Kit-Gasket, Long Engine, Nat/Asp | 1 |
| 32***05 | Camshaft, Assembly | 1 |
Z5-5-2 Kit-Engine Overhaul, Oversize - 0.50mm
| 32***40 | Bolt, Con-Rod, M8 X 57 | 8 |
| 32***16 | Kit-Top Gasket, Naturally Aspirated | 1 |
| 32***18 | Kit-Bottom Gasket | 1 |
Z5-1-1 Engine, Short, 320/40059
| 32***29 | Seal, Rear Oil | 1 |
| 32***19 | Seal, Front Oil | 1 |
| 32***16 | Kit-Top Gasket, Naturally Aspirated | 1 |
Z5-6-3 Kit-Engine Overhaul, Oversize - 1.00mm, Tc
| 32***40 | Bolt, Con-Rod, M8 X 57 | 8 |
| 32***17 | Kit-Top Gasket, Turbo Engine | 1 |
| 32***18 | Kit-Bottom Gasket | 1 |
Z5-5-3 Kit-Engine Overhaul, Oversize - 1.00mm
| 32***40 | Bolt, Con-Rod, M8 X 57 | 8 |
| 32***16 | Kit-Top Gasket, Naturally Aspirated | 1 |
| 32***18 | Kit-Bottom Gasket | 1 |
Z5-6-1 Kit-Engine Overhaul, Standard, Tc
| 32***40 | Bolt, Con-Rod, M8 X 57 | 8 |
| 32***11 | Kit-Piston, Standard, Turbo | 4 |
| 32***17 | Kit-Top Gasket, Turbo Engine | 1 |
Z6-1-1 Fuel Filter
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
| 21***07 | Pin, Tension | 1 |
| 32***14 | Retainer, Fuel Filter | 1 |
Z6-4-1 Primary Fuel Filter, Element, Cold Climate
| 32***05 | Element, Fuel Sediment/Water, 150 Microns | 1 |
| 32***33 | Seal, O'Ring | 1 |
Z6-2-1 Oil Filter
| 32***33 | Filter, Engine Oil | 1 |
| 32***23 | G.A, Oil Cooler 60kw, Inc Filter/Filler | 1 |
| 32***24 | Cooler, Oil, Inc Filter/Filler | 1 |
Z6-3-1 Primary Fuel Filter
| 13***7Z | Screw, M8 X 25 | 2 |
| 13***7Z | Screw, M12 X 25 | 2 |
| 32***94 | Element, Fuel Filter | 1 |
Z8-12-3 Front End Drive, Accessory, With Cooling Fan
| 32***00 | Hub, Fan Drive, Assembly | 1 |
| 32***03 | Pulley, Cooling Fan 1.25:1, D=133mm | 1 |
| 32***30 | Pulley, Idler, Long | 1 |
Z8-2-1 Autotensioner, Drive Belt
| 13***8Z | Screw, Star Drive, M8 X 30 | 3 |
| 32***84 | Adjuster, Auto-Tension | 1 |
| 32***46 | Adjuster, Autotensioner | 1 |
Z8-3-2 Lower Idler Pulley
| 13***5Z | Bolt, Flange Head, M8 X 65 | 3 |
| 22***62 | Circlip, Internal | 1 |
| 32***22 | Pulley, Idler, D=124mm | 1 |
Z8-1-1 Crankshaft Pulley
| 32***69 | Bolt, Torx Head Flange, M12 X 65 X 12.9 | 3 |
| 32***43 | Pulley, Crankshaft | 1 |
| 32***01 | Crankshaft, Assembly | 1 |
Z9-1-1 Starter Motor, 12.Volt
| 13***8Z | Screw, Star Drive, M10 X 30 | 3 |
| 32***32 | Motor, Starter 12v, With Earth Stud | 1 |
| 32***52 | Motor, Starter | 1 |
Z10-1-1 Alternator, 12volt - 95amp
| 13***8Z | Screw, Star Drive, M10 X 30 | 1 |
| 13***2Z | Bolt, Star Drive, M10 X 120 | 1 |
| 32***60 | Alternator, 12v-95amp | 1 |
Z11-1-1 Switches & Senders, 12volt
| 17***02 | Seal, Ring | 1 |
| 32***46 | Switch, Oil Pressure | 1 |
| 32***57 | Seal, Bonded | 1 |
Z12-1-1 Fuel Pipework, High Pressure
| 32***11 | Clip, F.I.P 2 Way | 4 |
| 32***59 | Pipe, Fuel, Injector 1 & 2, Assembly | 1 |
| 32***60 | Pipe, Fuel Injector 3 & 4, Assembly | 1 |
Z12-2-1 Fuel Pipework, Low Pressure
| 32***39 | Bolt, Banjo M12 | 2 |
| 32***71 | G.A, Ga Fuel Pipes(Hp/Lp), Genset | 1 |
| 32***33 | Ring, Snap | 1 |
Z12-3-1 Fuel Pipework, Primary Filter
| 32***41 | Pipe, Fuel Filter To Pump | 1 |
| 32***42 | Clip, Pipe, 8/9mm Dia | 1 |
| 32***43 | Clip, Pipe, 9.5/10mm Dia | 1 |
Z13-2-1 Fuel Injector, Tc
| 32***93 | Bolt, Injector Clamp | 4 |
| 32***39 | Clamp, Fuel Injector | 4 |
| 32***24 | Seal, Injector | 1 |
Z13-1-1 Fuel Injector
| 32***93 | Bolt, Injector Clamp | 4 |
| 32***39 | Clamp, Fuel Injector | 4 |
| 32***24 | Seal, Injector | 1 |
Z14-1-1 Fuel Lift Pump
| 13***7Z | Screw, Star Drive, M8 X 25 | 3 |
| 32***40 | Pump, Fuel Lift | 1 |
| 32***51 | O Ring | 1 |
Z15-4-1 Fuel Injection Pump, 12v - 89kw
| 32***19 | Seal, Injection Pump To Timing Case | 1 |
| 32***64 | Nut, M8 Flange Head | 3 |
| 32***77 | Nut, M14, Fuel Injection Pump Gear | 1 |
Z15-1-1 Fuel Injection Pump, 12v - 55kw
| 32***19 | Seal, Injection Pump To Timing Case | 1 |
| 32***64 | Nut, M8 Flange Head | 3 |
| 32***77 | Nut, M14, Fuel Injection Pump Gear | 1 |
Z15-2-1 Fuel Injection Pump, 12v - 86kw
| 32***19 | Seal, Injection Pump To Timing Case | 1 |
| 32***64 | Nut, M8 Flange Head | 3 |
| 32***77 | Nut, M14, Fuel Injection Pump Gear | 1 |
Z15-50-1 Injection Pump, Service Parts
| 32***74 | Kit-Regulator | 1 |
| 32***75 | Kit-Timing Window | 1 |
| 32***76 | Kit-Plug | 1 |
Z16-1-1 Water Pump
| 32***10 | Gasket, Water Pump | 1 |
| 32***14 | Screw, Pan Head, M8 X 25 | 4 |
| 32***42 | Pump, Water, Assembly | 1 |
Z17-1-1 Water Inlet, Connector
| 13***7Z | Screw, Star Drive, M8 X 25 | 4 |
| 32***01 | Gasket, Water Inlet Pipe | 1 |
| 32***47 | Connector, Water Inlet, Assembly | 1 |
Z18-1-1 Thermostat & Housing
| 13***5Z | Screw, Star Drive, M8 X 20 | 3 |
| 32***40 | Housing, Thermostat | 1 |
| 32***43 | Seal, C | 1 |
Z19-11-1 Cover, Injector Seal
| 32***16 | Cover, Injector Seal | 1 |
| 32***17 | Insert, Injector Seal Cover | 4 |
| 32***21 | G.A, Cover.Injector Seal | 1 |
Z19-1-1 Rocker Cover
| 32***90 | Cap, Oil Filler, Assembly | 1 |
| 32***92 | O Ring, Oil Filler Cap | 1 |
| 32***73 | Spring, Ccv Valve | 1 |
Z20-1-1 Rocker Shaft, Assembly
| 13***6Z | Bolt, M8 X 70 | 1 |
| 32***23 | Washer, Spring | 4 |
| 32***02 | Bolt, M8 X 55 | 7 |
Z20-3-1 Rocker Shaft, Assembly
| 13***2Z | Bolt, M8 X 50 | 7 |
| 13***5Z | Bolt, Flange Head, M8 X 65 | 1 |
| 32***23 | Washer, Spring | 4 |
Z20-2-1 Rocker Shaft, Assembly
| 13***6Z | Screw, Star Drive, M8 X 70 | 1 |
| 32***23 | Washer, Spring | 4 |
| 32***02 | Bolt, M8 X 55 | 7 |
Z21-1-1 Valve Tappets & Push, -Rods
| 32***15 | Rod, Push | 8 |
| 32***24 | Tappet, Valve | 8 |
| 32***05 | Camshaft, Assembly | 1 |
Z21-2-1 Pushrods & Tappets
| 32***24 | Tappet, Valve | 8 |
| 32***77 | Rod, Push | 8 |
Z22-1-1 Turbocharger, Tc
| 32***07 | Stud, M8 X 75 | 4 |
| 32***08 | Nut, Lock, M8 Special | 4 |
| 32***53 | Gasket, Single, Tc To Manifold | 1 |
Z23-2-1 Turbo Crossover Tube
| 32***14 | G.A, Turbo Crossover Tube, Garrett Htt | 1 |
| 32***33 | Tube, Turbo Crossover | 1 |
| 32***36 | Hose, 49.5mm X 55mm | 2 |
Z23-1-1 Turbo Pipework
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Screw, Star Drive, M8 X 20 | 2 |
| 32***51 | O Ring | 2 |
Z25-4-1 Induction Manifold, Tc
| 13***7Z | Screw, Star Drive, M8 X 25 | 10 |
| 32***11 | Plate, Blanking, Intake Heater | 1 |
| 32***12 | Gasket, Intake Heater | 1 |
Z25-1-1 Induction Manifold
| 13***7Z | Screw, Star Drive, M8 X 25 | 10 |
| 32***11 | Plate, Blanking, Intake Heater | 1 |
| 32***12 | Gasket, Intake Heater | 1 |
Z25-2-1 Induction Manifold, Tc
| 13***7Z | Screw, Star Drive, M8 X 25 | 10 |
| 32***11 | Plate, Blanking, Intake Heater | 1 |
| 32***12 | Gasket, Intake Heater | 1 |
Z26-1-1 Exhaust Manifold
| 32***04 | Gasket, Exhaust Manifold | 1 |
| 32***20 | Manifold, Exhaust | 1 |
| 32***45 | Bolt, M10 X 57 | 8 |
Z26-2-1 Exhaust Manifold, Tc
| 32***00 | Manifold, Exhaust | 1 |
| 32***45 | Bolt, M10 X 57 | 8 |
| 32***80 | Gasket, Exhaust Manifold | 1 |
Z27-3-1 Cylinder Head, Assembly
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 32***03 | Plug, Core, D=40mm | 2 |
| 32***28 | Sealant, 620 | 0 |
Z28-1-1 Brackets, Engine Lifting
| 13***8Z | Screw, Star Drive, M10 X 30 | 4 |
| 32***20 | Bracket, Engine Lifting | 2 |
| 32***39 | Label, Front Lifting Eye | 1 |
Z29-1-1 Oil Cooler
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 5 |
| 13***7Z | Screw, Star Drive, M8 X 25 | 11 |
| 21***07 | Pin, Tension | 1 |
Z30-1-1 Oil Level Dipstick, & Tube, Standard
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
| 32***27 | O Ring | 2 |
| 32***29 | O Ring | 1 |
Z31-1-1 Oil Sump
| 13***3Z | Screw, Star Drive, M8 X 16 | 2 |
| 32***13 | Plug, Oil Drain | 2 |
| 32***50 | O Ring | 2 |
Z32-1-1 Oil Pump
| 13***2Z | Screw, Star Drive, M8 X 50 | 4 |
| 32***31 | Pump, Engine Oil | 1 |
| 32***20 | Pump, Oil | 1 |
Z33-1-1 Flywheel Assembly, 11.5"Sae J620
| 32***42 | Bolt, M14 X 108mm | 1 |
| 32***72 | Flywheel, Assembly | 1 |
| 32***74 | Bolt, M14 X 100 Special | 8 |
Z34-1-1 Flywheel Housing, Fh1
| 13***3Z | Screw, Star Drive, M8 X 16 | 2 |
| 13***7Z | Screw, Star Drive, M8 X 25 | 4 |
| 13***2Z | Screw, Star Drive, M8 X 50 | 8 |
Z35-2-1 Camshaft, & Idler Gear, Tc
| 32***30 | Camshaft, Assembly, Tc/Tca | 1 |
| 32***15 | Hub, Idler Gear | 1 |
| 32***17 | Bolt, Pan Head, M10 X 60mm | 3 |
Z35-1-1 Camshaft, & Idler Gear
| 32***29 | Camshaft, Assembly, Na | 1 |
| 32***15 | Hub, Idler Gear | 1 |
| 32***17 | Bolt, Pan Head, M10 X 60mm | 3 |
Z36-1-1 Timing Case & Covers, Idler Blanking
| 13***7Z | Screw, Star Drive, M10 X 25 | 2 |
| 13***9Z | Screw, Star Drive, M12 X 35 | 2 |
| 32***25 | Sealant, Loctite 5182 | 0 |
Z37-2-1 Piston & Con-Rod, Assemblies, Tc
| 32***17 | Bush, Small End | 1 |
| 32***40 | Bolt, Con-Rod, M8 X 57 | 2 |
| 32***50 | Circlip | 2 |
Z37-1-1 Piston & Con-Rod, Assemblies
| 32***17 | Bush, Small End | 1 |
| 32***40 | Bolt, Con-Rod, M8 X 57 | 2 |
| 32***50 | Circlip | 2 |
Z38-1-1 Crankshaft Assembly
| 13***1Z | Screw, Star Drive, M10 X 45 | 1 |
| 21***05 | Dowel, Pin | 2 |
| 32***19 | Seal, Front Oil | 1 |
Z39-2-1 Cylinder Block, Assembly, Tc
| 13***8Z | Bolt, Star Drive, M8 X 80 | 16 |
| 32***01 | Plug, Core, D=25mm | 1 |
| 32***02 | Plug, Core, D=36mm | 2 |
Z39-1-1 Cylinder Block, Assembly
| 13***5Z | Screw, Star Drive, M8 X 20 | 2 |
| 13***8Z | Bolt, Star Drive, M8 X 80 | 16 |
| 32***01 | Plug, Core, D=25mm | 1 |
Z43-1-1 Air Filter, Installation
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***7Z | Screw, M10 X 25 | 3 |
| 16***77 | Cap, Rain | 1 |
Z45-1-1 Exhaust Silencer, Open Build, Nat/Aspirated
| 02***16 | Nut | 4 |
| 32***06 | Gasket | 1 |
| 32***63 | Stud, M8 X 1.25 | 4 |
Z45-12-1 Exhaust System, Canopy Build, Turbo
| 02***35 | Nut, Anti-Seize | 3 |
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
Z45-2-1 Exhaust Silencer, Open Build, Turbo
| 02***35 | Nut, Anti-Seize | 4 |
| 32***97 | Silencer, Exhaust | 1 |
| 32***53 | Clamp, "U" | 1 |
Z45-11-1 Exhaust System, Canopy Build, Nat/Aspirated
| 02***16 | Nut | 4 |
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
Z46-11-1 Fan Guards
| 13***3D | Setscrew | 24 |
| 14***6D | Washer, M6 Plain | 24 |
| 14***6D | Washer, Spring, M6 | 24 |
Z46-2-1 Radiator & Fittings
| 30***54 | Radiator, Assembly | 1 |
| 30***55 | Cap, Radiator Pressure | 1 |
Z46-1-1 Radiator & Fittings, Naturally Aspirated
| 30***53 | Radiator, Assembly | 1 |
| 30***55 | Cap, Radiator Pressure | 1 |
Z48-11-1 Radiator, Coolant Drain
| 32***70 | Valve, 1/2"Bsp Female, 1/2"Bsp Male | 1 |
| 32***71 | Adapter, 1/2"Bsp M 1/2"Tail | 2 |
| 32***72 | Hose, Fuel 1/2"Bore | 1 |
Z48-1-1 Radiator, Hose & Pipework
| 30***58 | Clip, Hose | 4 |
| 83***74 | Hose, Top Radiator | 1 |
| 83***75 | Hose, Bottom Radiator | 1 |
Z49-1-1 Cooling Fan & Spacer
| 13***8D | Bolt | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
Z50-1-1 Fuel Pipes, Fuel Tank To Filter
| 32***16 | Hose, Fuel Supply | 2 |
| 32***68 | Clip, 6mm Hose | 4 |
| 32***74 | Adapter, 3/8" Male 3/8"Male | 2 |
Z51-11-1 Filter, Fuel Sedimenter, (Racor)
| 32***09 | Filter, Fuel, Assembly | 1 |
| 32***10 | Element, Fuel Filter | 1 |
| 32***41 | O Ring | 1 |
Z57-1-1 Engine Oil Drain
| 14***19 | Seal, Dowty | 1 |
| 22***03 | Clip, Jubilee | 2 |
| 32***71 | Adapter, 1/2"Bsp M 1/2"Tail | 2 |
Z60-5-1 Lifting Bracket, (Optional)
| 13***2D | Setscrew, M16 X 50mm | 8 |
| 13***3Z | Nut | 8 |
| 14***1D | Washer, M16 | 16 |
Z60-2-1 Base & Fittings
| 13***8D | Setscrew, M10 X 30 | 0 |
| 13***8D | Setscrew, M12 X 30 | 0 |
| 13***3D | Nut, Self Lock M10 | 0 |
Z60-1-1 Base & Fittings
| 13***8D | Setscrew, M10 X 30 | 0 |
| 13***8D | Setscrew, M12 X 30 | 0 |
| 13***3D | Nut, Self Lock M10 | 0 |
Z60-11-1 Fuel Tank
| 32***18 | Cap, Fuel Tank | 1 |
| 32***10 | Tank, Fuel | 1 |
| 32***64 | Plug, Male 3/8"Bsp, Socket Head | 1 |
Z61-21-1 Canopy Soundproofing
| 32***14 | Kit-Panel, Foam Foil Backed, Centre Section | 1 |
| 32***15 | Kit-Panel, Foam Soundproofing, Centre Section | 1 |
| 32***39 | Kit-Panel, Soundproofing, End Cap Sections | 1 |
Z61-1-1 Canopy Assembly
| 13***5D | Setscrew, M8x20 | 74 |
| 13***3D | Nut, Self Lock M8 | 22 |
| 14***7D | Washer, M8 Plain | 74 |
Z62-12-1 Alternator, Accessories
| 32***17 | Unit, Current Transformer, 200-5a | 1 |
| 32***31 | Kit, Voltage Monitor | 1 |
| 32***32 | Kit, Fuse 1a (10 Off) | 1 |
Z62-11-1 Alternator, Accessories
| 32***64 | Unit, Current Transformer | 1 |
| 32***31 | Kit, Voltage Monitor | 1 |
| 32***32 | Kit, Fuse 1a (10 Off) | 1 |
Z62-1-1 Alternator, Uci 224d-16
| 32***08 | Regulator, A.V.R Sx460 | 1 |
| 32***56 | Alternator | 1 |
| 32***57 | Bearing, Nde | 1 |
Z62-2-1 Alternator, Uci 224e-16
| 32***08 | Regulator, A.V.R Sx460 | 1 |
| 32***57 | Bearing, Nde | 1 |
| 32***69 | Alternator | 1 |
Z62-3-1 Alternator, Uci 224g-16
| 32***08 | Regulator, A.V.R Sx460 | 1 |
| 32***57 | Bearing, Nde | 1 |
| 32***99 | Kit-Rectifier, Service | 1 |
Z63-11-1 Control Unit, Box & Panel Assemblies
| 13***3D | Setscrew | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 14***6D | Washer, M6 Plain | 8 |
Z63-2-1 Control Box Assembly
| 13***3D | Setscrew | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***5D | Setscrew, M8x20 | 4 |
Z63-12-1 Control Unit, Box & Panel Assemblies
| 13***3D | Setscrew | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 14***6D | Washer, M6 Plain | 8 |
Z63-1-1 Control Box Assembly
| 13***3D | Setscrew | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***5D | Setscrew, M8x20 | 4 |
Z64-3-1 Circuit Breaker Box, Assembly
| 13***5D | Screw, M5x20 | 6 |
| 13***5D | Setscrew, M6 X 20mm Long | 14 |
| 13***0D | Screw, Set | 2 |
Z64-2-1 Circuit Breaker Box, Assembly
| 13***5D | Screw, M5x20 | 6 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***8D | Setscrew, M10 X 30 | 1 |
Z64-12-1 Circuit, Breaker, Box Assembly
| 13***5D | Setscrew, M6 X 20mm Long | 86 |
| 13***5D | Setscrew, M8x20 | 37 |
| 14***6D | Washer, M6 Plain | 86 |
Z64-1-1 Circuit Breaker Box, Assembly
| 13***5D | Screw, M5x20 | 6 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***3D | Nut, Self Lock M8 | 1 |
Z64-11-1 Circuit, Breaker, Box Assembly
| 13***5D | Setscrew, M6 X 20mm Long | 86 |
| 13***5D | Setscrew, M8x20 | 37 |
| 14***6D | Washer, M6 Plain | 86 |
Z65-1-1 Engine Electrics
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***5D | Screw, M12 X 20mm Long | 2 |
| 13***3Z | Screw, M4 X 16 | 4 |
Z65-11-1 Battery Installation
| 13***5D | Setscrew, M8x20 | 2 |
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
Frequently asked questions
What engine does the JCB G88 use?
The JCB G88 utilizes a JCB Dieselmax engine, specifically the 7.2 Litre CRDI variant delivering 284 hp (212 kW) and 1150 Nm of peak torque.
What is the operating weight of the JCB G88?
Operating weight ranges from 37,331 kg to 38,027 kg (82,300–83,830 lb) depending on the specific configuration and track frame width.
What model replaced the JCB G88?
The JCB G88 is part of the JS-series tracked excavator lineage. It succeeded the 800-series mini-excavators and is followed by modern JS-series heavy excavators such as the JS385LC.
What G88 owners discuss
What are the known powertrain and hydraulic behaviors for the JCB G88?
What undercarriage or wear patterns are typical for this machine type?
What engine quirks are associated with the JCB G88 series?
What are common electrical or sensor issues?
What should be checked when buying a used G88?
What safety-critical fix is required for the hydraulic system?
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb G88. Related factory variants of the same model family:
Need a specific G88 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.