JCBagriculturalfastrac
Jcb FASTRAC 7230-PT(.)
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 7230 is a high-speed agricultural wheel tractor belonging to the 7000 Series, produced from approximately 2009 to 2017. It is powered by a Cummins QSB 6.7L six-cylinder turbocharged intercooled diesel engine delivering 220 hp (164 kW) at 2200 rpm. The machine features a 6×4 wet clutch gearbox with 24 forward and 9 reverse speeds, offering a maximum road speed of 50 km/h or 70 km/h depending on configuration. Operating weight ranges from 9,185 kg (20,249 lb) for 2WD to 9,185 kg (20,249 lb) for 4WD configurations, with a total length of 5.72 m and width of 3.05 m. The 7230 succeeded the 3000 Series (e.g., 3230) and was followed by the 4000 Series (e.g., 4220) which introduced CVT transmissions. Configurations included selectable four-wheel drive, hydrostatic or mechanical steering options, and rear-mounted cabs.
Across the 7000 Series generation, the primary evolution was the shift from dry clutch to wet clutch transmissions and the integration of Cummins engines with electronic fuel injection, replacing earlier Perkins and early Cummins mechanical units. The 7230 matters in the used and parts market as a robust, high-horsepower workhorse with a widely available aftermarket support network for its Cummins powertrain. Its discontinuation has driven demand for reliable replacement parts for the QSB 6.7 engine and 6×4 gearbox. The model remains valued for its heavy-duty construction and high transport speed, making it a staple in mixed farming operations where road mobility and field power are both critical.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 7230-PT(.) specifications
Engine
| Model | Cummins QSB 6.7 |
| Gross Power | 223 hp (164 kW) |
| Net Power | 220 hp (162 kW) |
| Displacement | 6702 cm³ (409 cu in) |
| Cylinders | 6 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 9185 kg (20,249 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 572 cm (18 ft 9 in) |
| Transport Width | 305 cm (10 ft 0 in) |
| Transport Height | 323 cm (10 ft 7 in) |
| Wheelbase | Not documented for this exact serial range — verify with your dealer |
| Track Gauge | 201 cm (7 ft 1 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
| Turning Radius (4WD) | 13.8 m (45 ft 3 in) |
Performance
| Travel Speeds | 1.7–69.0 km/h (1.1–42.9 mph) |
| Maximum Speed | 50 km/h (31 mph) or 70 km/h (43 mph) |
| Lift Capacity (Rear Three-Point Hitch) | 9000 kg (19,842 lb) |
| Drawbar Pull | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 430 L (113.6 gal) |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
FASTRAC 7230-PT(.) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 13.5 L (3.57 US gal) | JCB Advanced engine oil (viscosity by climate per OMM) |
| Cooling system | 24.5 L (6.47 US gal) | JCB Coolant (50/50 pre-mix) |
| Fuel tank | 430 L (113.5 US gal) | Diesel fuel |
| Transmission/powertrain compartments | 48.5 L (12.81 US gal) | JCB Transmission oil |
| Final drives (each) | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system AND tank | 135 L (35.66 US gal) | JCB Hydraulic oil |
| Axles/differentials | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease (spec only) | N/A | JCB Blue grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb FASTRAC 7230-PT(.) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the FASTRAC 7230-PT(.) beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil pressure and coolant temperature gauges daily. Use Jaltest diagnostics to read ECM fault codes and monitor Cummins QSB 6.7 sensor data. Analyze hydraulic oil samples every 500 hours for viscosity and contamination. Check transmission fluid color and smell for signs of overheating. Inspect air intake restriction indicators before each shift. Track fuel filter differential pressure to predict clogging. Verify battery voltage and specific gravity during routine checks.
Corrective & Common Repairs
Address hydraulic leaks at axle seals and pump connections promptly. Replace worn brake discs and pads if stopping distance increases. Fix steering joint play by replacing kingpin bushings or seals. Repair fuel line chafing to prevent air ingress. Replace cracked turbocharger hoses or loose clamps. Fix electrical faults in the cab wiring harness. Replace worn clutch discs if engagement becomes slippery. Inspect and replace worn PTO shaft splines.
Overhaul & Rebuild Points
Rebuild the Cummins QSB 6.7 engine at 10,000–15,000 hours depending on service history. Inspect cylinder liners and piston rings for wear. Overhaul the 6×4 gearbox if gear noise or shifting issues arise. Replace bearing sets in the front and rear axles. Rebuild the hydraulic pump if flow drops below specification. Inspect the turbocharger for shaft play and rebuild or replace. Check the injector pump for calibration drift.
Seasonal & Environment Servicing
Flush the cooling system and replace coolant with correct antifreeze mix before winter. Check the battery heater and insulation for cold climates. Inspect the cab air conditioning and heating filters. Clean the radiator and oil cooler fins of chaff and dust after harvest. Lubricate all linkage points with grease suitable for the operating temperature. Check tire pressure for road and field conditions. Inspect the exhaust system for corrosion after winter use.
FASTRAC 7230-PT(.) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925763 | Element, Fuel Water/Sediment, Filter Cartridge | Fuel system service | Check fitment → |
| 32/925920 | Filter, Fuel Assembly, M12 Ports | Fuel system service | Check fitment → |
| 332/U7903 | Filter, Fuel Sediment, Assembly Abi | Fuel system service | Check fitment → |
| 332/S3272 | Hose, Diesel Fuel, Tank To Filter | Fuel system service | Check fitment → |
| 332/S3273 | Hose, Diesel Fuel, Tank To Filter Feed | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 7230-PT(.) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0100 | Torque Reduction AMF High Side Driver fault (Open Circuit or Short Circuit to Battery) | Fault in the Air Mass Flow (AMF) sensor high-side driver circuit or electrical sensor fault (ADC). | Inspect AMF sensor wiring for open circuits or short circuits to the battery; check electrical sensor connections. |
| P0101 | MAF Sensor Fault | Malfunction in the Mass Air Flow (MAF) sensor circuit. | Check MAF sensor connector for corrosion or loose plugs; verify sensor operation. |
| P0102 | Torque Reduction MAF Low Voltage Fault | MAF sensor signal voltage is below the calibrated minimum threshold. | Inspect MAF sensor wiring for low voltage faults; check sensor ground and signal lines. |
| P0103 | Torque Reduction MAF High Voltage Fault | MAF sensor signal voltage is above the calibrated maximum threshold. | Inspect MAF sensor wiring for high voltage faults; check for short to battery. |
| P029B | Injector drift fault detection on Injector 2 | Injector 2 MDP (Mechanical Drive Position) trim exceeds the maximum calibrated threshold limit. | Inspect Injector 2 wiring and connections; verify injector mechanical operation and trim values. |
| P0321-87 | CAN bus message error for engine speed from engine ECU | Communication failure on the CAN bus regarding engine speed data. | Check CAN bus wiring and connectors for damage or corrosion; verify ECU communication. |
| P0325 | Accelerometer fault (signal/noise ratio too low in idle) | Accelerator pedal position sensor signal noise or low signal ratio. | Inspect accelerator pedal position sensor wiring and connector; check for signal interference. |
| P0330 | Knock Sensor 1 Circuit | Fault in the Knock Sensor 1 circuit. | Inspect Knock Sensor 1 wiring and connector; check sensor integrity. |
| P0335 | Crankshaft Position Sensor 'A' Circuit (No Signal) | Loss of signal from the crankshaft position sensor. | Inspect crankshaft position sensor wiring and connector; verify sensor gap and operation. |
| P0336 | Torque Reduction Crank Sensor Fault (Signal Fault) | Crankshaft position sensor signal is out of limits or erratic. | Inspect crankshaft position sensor wiring and connector; check for signal faults. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
FASTRAC 7230-PT(.) attachments & work tools
Front Loader Attachments
The JCB FASTRAC 7230-PT is compatible with front-end loader buckets and specialized forks for material handling. Factory configurations often include front hydraulic circuits to support these attachments, enabling efficient grain, bulk fertilizer, and bale handling operations.
Rear Three-Point Linkage
The tractor features a Category 3 rear three-point linkage system for mounting heavy agricultural implements. This linkage supports high rear lift capacities suitable for cultivation, drilling, and general farm tasks across arable and livestock operations.
Power Take-Off (PTO)
The model is equipped with both front and rear independent Power Take-Off (PTO) systems. These PTOs operate at standard speeds of 540 rpm and 1000 rpm to drive various field implements and machinery.
Hydraulic Systems
The FASTRAC 7230 utilizes a comprehensive hydraulic system with multiple remote outlets to operate complex attachments. The system supports high-flow requirements for modern implements, ensuring consistent performance during demanding field work.
Cab and Operator Environment
The tractor features a centrally mounted cab with advanced iCON control systems for implement integration. The environment includes ISOBUS compatibility for precision agriculture technology and Smart Transmission Control for optimized operation.
All FASTRAC 7230-PT(.) assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 7230-PT(.). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-3-1 Kit, Front Hitch, Mechanical Linkage
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***6D | Bolt, M20 X 70 | 6 |
| 13***1D | Bolt, M20x110 | 4 |
A3-31-1 Rear Deck, Standard
| 13***5D | Setscrew, M6 X 20mm Long | 8 |
| 13***8D | Setscrew, M10 X 30 | 6 |
| 13***1D | Bolt, M20x45, Dacromet | 4 |
A3-12-2 Hitch, Pick-Up & Drawbar ( Iso 3 Position )
| 25***03 | Ring, Key | 1 |
| 33***27 | Hook, Towing | 1 |
| 33***39 | Pin, Tow Hook | 1 |
A3-34-1 Rear Deck, With Toolbox
| 13***5D | Setscrew, M6 X 20mm Long | 10 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M10 X 30 | 6 |
A3-26-1 Drawbar, 80mm Ball
| 33***38 | Drawbar, 80mm Ball | 1 |
A3-26-2 Drawbar, 80mm Ball - C/W Steer Kit
| 33***39 | Drawbar, 80mm Ball, C/W Steer Kit | 1 |
A3-5-11 Top Link, Storage
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 6 |
A3-26-4 Drawbar, Clevis - Cat 3
| 33***17 | Drawbar, Assembly | 1 |
| 33***99 | G.A, Clevis Drawbar & Pin | 0 |
| 33***64 | Pin, Lynch, 11mm Dia X 55mm | 1 |
A3-19-1 Drawbar
| 13***2D | Bolt | 2 |
| 13***3D | Nut, M16 Self Locking | 2 |
| 14***1D | Washer, M16 | 2 |
A3-21-1 Ladder Hitch & Piton
| 13***9D | Capscrew | 12 |
| 33***29 | Hitch, Tow, Piton, Fixed | 1 |
| 33***99 | Rail, Left Hand, Ladder Hitch | 1 |
A3-5-1 Top Link, Front
| 33***57 | Link, Top | 1 |
| 33***74 | G.A, Top Link | 1 |
| 47***07 | Nipple, Grease | 2 |
A3-22-2 Hitch, Ladder & Drawbar
| 13***9D | Capscrew | 12 |
| 33***30 | Frame, Support, Clevis Drawbar | 1 |
| 33***33 | Plate, Drawbar Guide | 1 |
A3-23-1 Ladder Hitch, With Piton & Drawbar
| 13***9D | Capscrew | 12 |
| 33***29 | Hitch, Tow, Piton, Fixed | 1 |
| 33***30 | Frame, Support, Clevis Drawbar | 1 |
A3-33-2 Rear Deck, With Wheel Chocks, & Toolbox
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***7D | Setscrew, M8x25 | 2 |
A3-50-1 Ladder, Pick Up Hitch
| 33***06 | G.A, Puh Release | 1 |
| 33***33 | G.A, Ga Drawbar/Hook, Stowage | 1 |
| 33***18 | I.A, Ladder And Puh | 1 |
A3-27-1 Trailer Coupling, Ladder Hitch, Rockinger 850d30
| 33***36 | Kit-Stop | 1 |
| 33***36 | Coupling, Trailer Towing, 850d30 | 1 |
| 33***94 | G.A, Rockinger 850rd No, Remote P143 | 1 |
A3-15-1 Lift Rod Assembly, Standard
| 33***20 | Rod, Lift, Assembly | 2 |
| 34***10 | G.A, Lift Link Assembly | 1 |
| 47***07 | Nipple, Grease | 4 |
A3-1-12 Weight Installation
| 13***8D | Setscrew, M16 X 30mm | 6 |
| 13***4D | Bolt, M20 X 60mm | 4 |
| 13***2D | Bolt, M20 X 120mm | 4 |
A3-31-3 Rear Deck, Standard
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***1D | Bolt, M20x45, Dacromet | 4 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
A3-32-3 Rear Deck, With Wheel Chocks
| 13***1D | Bolt, M20x45, Dacromet | 4 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
| 14***2D | Washer, Plain | 8 |
A3-11-1 Hitch, Rear, Linkage
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M8x25 | 2 |
A3-3-20 Kit, Hydraulic Quickhitch, Front
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***4D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
A3-22-1 Ladder Hitch, & Drawbar
| 13***9D | Capscrew | 12 |
| 33***30 | Frame, Support, Clevis Drawbar | 1 |
| 33***33 | Plate, Drawbar Guide | 1 |
A3-52-1 Pickup Hitch, Uk
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Bolt, M18 X 55 | 4 |
| 14***8D | Washer, M10 | 2 |
A3-1-3 Weight Assembly
| 13***2D | Bolt | 1 |
| 13***9D | Bolt, M20 X 90, Dacromet | 4 |
| 13***0D | Bolt, M20 X 100 | 2 |
A3-32-1 Rear Deck, With Toolbox
| 13***5D | Setscrew, M6 X 20mm Long | 10 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M10 X 30 | 6 |
A3-1-11 Weight Tray, Front
| 13***4D | Bolt, M20 X 60mm | 6 |
| 13***3D | Nut, M16 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 6 |
A3-13-3 Hitch, Pick-Up Latch
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***2D | Bolt | 2 |
| 13***3D | Nut, M6 Lock | 2 |
A3-51-1 Pickup Hitch, & Drawbar
| 33***06 | G.A, Puh Release | 1 |
| 33***33 | G.A, Ga Drawbar/Hook, Stowage | 1 |
| 34***91 | I.A, Pick Up Hitch (Uk), Spec, Dromone | 1 |
A3-30-1 Rear Deck Weight, 800kg
| 13***6D | Bolt, M20 X 70mm | 4 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Bolt, M20 X 130mm | 2 |
A3-10-1 Hitch, Rear
| 13***7D | Setscrew, M10 X 25mm Long | 10 |
| 13***9D | Bolt, M10 X 35mm Long | 4 |
| 13***5D | Capscrew; Replaces 82***45 | 2 |
A3-13-1 Hitch, Pick-Up Latch
| 13***4D | Screw, M10x60 | 2 |
| 13***2D | Bolt | 2 |
| 13***5D | Bolt, M16 X 65mm | 4 |
A3-13-2 Hitch, Pick-Up Latch
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***2D | Bolt | 2 |
| 13***3D | Nut, M6 Lock | 2 |
A3-1-0 Weight Tray Assembly, Front, Installation
| 33***09 | G.A, Weight Tray (With), Tow Hitch | 1 |
| 33***99 | G.A, Front Wt Tray Common | 1 |
| 48***02 | G.A, Front Weight Tray | 1 |
A3-20-1 Ladder Hitch
| 13***9D | Capscrew | 12 |
| 33***99 | Rail, Left Hand, Ladder Hitch | 1 |
| 33***00 | Rail, Right Hand, Ladder Hitch | 1 |
A3-12-11 Hitch, Pick-Up & Ladder
| 13***1D | Bolt, M8x45mm | 21 |
| 13***2D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
A3-34-2 Rear Deck, With Toolbox
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***1D | Bolt, M20x45, Dacromet | 4 |
A3-12-30 332/R8239, Latch
| 14***07 | Nipple, Grease, 45 Deg. Angle | 2 |
| 33***39 | Latch, Assembly | 1 |
A3-32-2 Rear Deck, With Wheel Chocks
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***8D | Setscrew, M12 X 30 | 2 |
| 13***1D | Bolt, M20x45, Dacromet | 4 |
A3-2-1 Hitch Assembly, Front
| 13***6D | Bolt, M20 X 70 | 6 |
| 13***1D | Bolt, M20x110 | 4 |
| 13***3Z | Nut, M16 | 2 |
A3-12-1 Hitch, Pick-Up & Drawbar
| 13***2D | Bolt | 2 |
| 13***3D | Nut, M16 Self Locking | 2 |
| 14***1D | Washer, M16 | 2 |
A3-20-2 Hitch, Ladder
| 13***9D | Capscrew | 12 |
| 33***33 | Plate, Drawbar Guide | 1 |
| 33***37 | Kit-Guard, Ladder Hitch | 1 |
A3-1-2 Weight Installation
| 13***8D | Setscrew, M16 X 30mm | 6 |
| 13***4D | Bolt, M20 X 60mm | 4 |
| 13***2D | Bolt, M20 X 120mm | 4 |
A3-25-1 Ladder Hitch, & 80mm Ball, With Drawbar
| 13***9D | Capscrew | 12 |
| 33***28 | Hitch, Tow, 80mm Ball, (Fixed) | 1 |
| 33***30 | Frame, Support, Clevis Drawbar | 1 |
A3-12-21 Drawbar Bracket
| 13***2D | Bolt, M20 X 50mm | 4 |
| 14***2D | Washer, Plain | 4 |
| 25***03 | Ring, Key | 2 |
A3-6-1 Drawbar, Hook Stowage
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
A3-14-1 Hitch, Quick Release Plate, & Top Link Bracket
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
| 13***7D | Setscrew, M8x25 | 9 |
| 13***3D | Nut, M6 Lock | 1 |
A3-1-14 Weight Tray Assembly, Front
| 13***0D | Bolt, M20 X 100 | 4 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
| 14***2D | Washer, Plain | 8 |
A3-12-12 Hitch, Ladder & Pick-Up
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***9D | Capscrew | 12 |
| 14***6D | Washer, M6 Plain | 2 |
A3-28-1 Trailer Coupling, Ladder Hitch, Rockinger 860d30
| 33***34 | Kit-Lever | 1 |
| 33***35 | Kit-Spring | 1 |
| 33***36 | Kit-Stop | 1 |
A3-3-0 Kit, Front Hitch, Attachment
| 33***51 | Kit, Front Hitch, Mechanical Linkage | 1 |
| 33***79 | Kit, 5th Spool, Standard Flow 100 | 1 |
| 33***92 | Kit, 5th Spool, High Flow 140 | 1 |
A3-33-3 Rear, Deck, With Wheel Chocks, & Toolbox
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***7D | Setscrew, M8x25 | 2 |
A3-19-2 Drawbar
| 13***2D | Bolt | 2 |
| 13***3D | Nut, M16 Self Locking | 2 |
| 14***1D | Washer, M16 | 2 |
A3-3-10 Kit, Hitch, Angle Sensor
| 13***1D | Setscrew, M8 X 12mm | 2 |
| 13***3D | Setscrew, M4 X 16 | 2 |
| 13***2D | Nut | 1 |
A3-1-4 Weight Tray Assembly, Front
| 13***4D | Bolt, M20 X 60mm | 6 |
| 13***0D | Bolt, M20 X 100 | 4 |
| 13***3D | Nut, M16 | 2 |
A3-12-14 Hitch, Ladder & Pick-Up
| 13***1D | Screw, M6x45 | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
A3-2-2 Hitch Angle Sensor
| 13***1D | Setscrew, M8 X 12mm | 2 |
| 13***3D | Setscrew, M4 X 16 | 2 |
| 13***2D | Nut | 1 |
A3-16-1 Rear Lower Links, Cat 3
| 47***39 | Kit-Hook End | 1 |
| 48***87 | G.A, Rear Linkage Common, Parts | 1 |
| 48***90 | G.A, Hd Cat 3 Rear Linkag | 1 |
A3-34-3 Rear Deck, With Toolbox
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***1D | Bolt, M20x45, Dacromet | 4 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
A3-24-1 Ladder Hitch, & 80mm Ball
| 13***9D | Capscrew | 12 |
| 33***28 | Hitch, Tow, 80mm Ball, (Fixed) | 1 |
| 33***92 | G.A, 80mm Ball Fixed | 1 |
A3-26-3 Drawbar, Piton
| 33***20 | Drawbar, Piton | 1 |
A3-33-4 Rear, Deck, With Wheel Chocks, & Toolbox
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***1D | Bolt, M20x45, Dacromet | 4 |
| 13***3D | Nut, M6 Lock | 4 |
A3-31-2 Rear Deck, With Toolbox
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***1D | Bolt, M20x45, Dacromet | 4 |
A3-1-1 Weight Tray, Front
| 13***4D | Bolt, M20 X 60mm | 6 |
| 13***0D | Bolt, M20 X 100 | 4 |
| 13***3D | Nut, M16 | 2 |
B Bodywork, Cab, Loader End
B1-7-3 Rear Fender, Sealing Skirt
| 13***7D | Screw, M6 X 25mm | 14 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 16 |
B1-5-1 Bonnet Assembly
| 13***1D | Nut, Plain M5 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
| 13***3D | Nut, M6 Lock | 4 |
B1-4-3 Pannier, Right Hand, Top Cover
| 13***5D | Screw, Set | 8 |
| 13***1D | Nut, Plain | 4 |
| 14***7D | Washer, M8 Plain | 4 |
B1-1-1 Chassis & Fittings
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***2D | Setscrew | 8 |
| 13***0D | Setscrew, M16 X 40mm | 22 |
B1-3-2 Fuel Tank Support
| 13***0D | Setscrew, M12 X 40 | 7 |
| 14***9D | Washer, M12 | 11 |
| 33***70 | Tray, Support | 1 |
B1-10-1 Crossbeam, Rear
| 13***0D | Setscrew, M16 X 40mm | 8 |
| 13***1D | Nut | 8 |
| 33***87 | Rear-X-Member-Ga | 1 |
B1-7-1 Fenders, Rear
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***8D | Setscrew, M8 X 30mm | 14 |
B1-4-12 Step, Cab Access, Left Hand Side
| 13***8D | Setscrew, M10 X 30 | 20 |
| 13***8D | Setscrew, M12 X 30 | 2 |
| 13***3D | Nut, Self Lock M10 | 22 |
B1-4-2 Pannier, Right Hand, Door
| 13***5D | Setscrew, M6 X 20mm Long | 14 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***5D | Setscrew, M10 X 20 | 6 |
B1-8-1 Front Light Bars
| 13***9D | Screw, M12x35mm Long | 8 |
| 13***3D | Nut, M12 | 8 |
| 14***9D | Washer, M12 | 16 |
B1-7-5 Fender Extensions, Rear
| 13***8D | Bolt, M6 X 30 | 12 |
| 14***1D | Washer, Large | 12 |
| 33***24 | G.A, Rear Fender Spat | 0 |
B1-2-1 Tank, Hydraulic
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***9D | Bolt, M12x35 | 4 |
| 13***3D | Nut, M12 | 4 |
B1-4-1 Pannier, Right Hand, Frame
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***7D | Setscrew, M12 X 25 | 1 |
B1-4-4 Pannier, Right Hand, Mud Guard
| 13***7D | Setscrew, M8x25 | 2 |
| 14***7D | Washer, M8 Plain | 5 |
| 33***75 | Guard, Mud | 1 |
B1-6-2 Swivel Assemblies, Front Rh & Lh
| 13***8D | Setscrew, M10 X 30 | 1 |
| 13***6D | Bolt, M10 X 70mm Long | 1 |
| 13***5D | Bolt, M16 X 65mm | 4 |
B1-6-1 Fenders, Front
| 13***1D | Bolt, M12x45mm | 4 |
| 13***5D | Bolt | 4 |
| 13***5D | Bolt | 4 |
B1-4-11 Step, Cab Access, Left Hand
| 13***8D | Setscrew, M10 X 30 | 20 |
| 13***3D | Nut, Self Lock M10 | 16 |
| 14***8D | Washer, M10 | 36 |
B1-3-3 Fuel Tank, Support
| 13***0D | Setscrew, M12 X 40 | 7 |
| 14***9D | Washer, M12 | 11 |
| 33***70 | Mat, Fuel Tank, Inner | 1 |
B1-7-10 Rear, Fender, Assembly For Spacer Plate
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***8D | Setscrew, M8 X 30mm | 14 |
B1-3-1 Tank, Diesel Fuel
| 32***90 | Plug, Drain | 1 |
| 33***76 | Cap, Diesel,Vented | 1 |
| 33***69 | Tank, Fuel, Assembly | 1 |
B1-5-3 Bonnet Release, Mechanism
| 12***43 | Buffer | 1 |
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***8D | Bolt, M6 X 30 | 3 |
B1-5-2 Bonnet Support Frame, Installation
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M8x25 | 10 |
| 13***8D | Bolt, M8x30mm | 2 |
B1-9-1 Crossbeam
| 13***3D | Nut | 4 |
| 13***8D | Capscrew, M20 X 180 | 4 |
| 14***2D | Washer | 8 |
B1-7-2 Rear Fender, Extensions
| 13***5D | Screw, M5x20 | 8 |
| 14***1D | Washer, Large | 8 |
| 33***86 | Fender, Rear Extension, Right Hand | 1 |
B1-7-4 Fenders, Rear
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***8D | Setscrew, M8 X 30mm | 14 |
B1-1-2 Chassis & Fittings
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***9D | Screw, M12x35mm Long | 19 |
| 13***1D | Screw, M12x45 | 3 |
B2-6-3 B Post Internal Trim
| 14***4Z | Screw | 2 |
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
B2-5-2 Filter, Air Conditioning
| 33***48 | Gasket, Air Filter | 1 |
| 33***36 | G.A, Heating Ventilation Air Conditioning Components | 1 |
| 33***59 | Filter, Cab Aircon | 1 |
B2-1-10 Cab Assembly, Winterised
| 33***06 | Glass, Screen, Right Hand | 1 |
| 33***39 | G.A, Cab Trim | 1 |
| 33***24 | G.A, Cab Riv-Nut | 1 |
B2-1-2 Cab, Assembly, Standard
| 33***06 | Glass, Screen, Right Hand | 1 |
| 33***27 | Frame, Cab | 1 |
| 33***54 | Cab, Assembly Yellow No Hatch | 1 |
B2-7-6 Cooler Box
| 33***34 | Casing, Cooler Box | 1 |
| 33***58 | G.A, Cooler Box | 1 |
| 33***70 | Box, Cooler Abi | 1 |
B2-3-14 Mirrors, External, Heated
| 12***09 | Cap, Nut M8; Replaces 69***72 | 1 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***9D | Bolt, M5 X 35mm Long | 4 |
B2-3-22 Door Interlock
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 13***1D | Nut, Plain | 2 |
| 13***1Z | Nut | 1 |
B2-6-6 Wheelhouse Mouldings
| 13***7D | Setscrew, M8x25 | 18 |
| 14***7D | Washer, M8 Plain | 10 |
| 33***52 | G.A, Wheelhouse Mouldings | 1 |
B2-6-7 Moulding, Front Bulkhead
| 33***27 | G.A, Front Bulkhead Mldg | 1 |
| 33***42 | Seal, Steering Shaft | 1 |
| 33***91 | Moulding, Front Bulkhead | 1 |
B2-9-5 Hvac Duct Insulation
| 33***56 | Panel, Duct Insulation | 1 |
| 33***03 | Panel, Insulation, Lower Front Duct | 1 |
| 33***05 | Panel, Insulation, Front Duct R/Hand | 1 |
B2-7-7 Monitor Mounting
| 14***7D | Washer, M8 Plain | 4 |
| 33***94 | G.A, Monitor Mount | 1 |
| 33***69 | Bracket, Monitor Mounting | 1 |
B2-3-12 Mirrors, External, Heated
| 13***3D | Nut, Self Lock M10 | 4 |
| 13***9D | Capscrew, M10x35 | 4 |
| 33***13 | Glass, Mirror | 1 |
B2-9-22 Cab Base Insulation, External
| 14***1D | Washer, Large | 8 |
| 33***25 | Insulation, Access Panel | 2 |
| 33***53 | Panel, Soundproofing, Left | 1 |
B2-1-1 Cab Assembly, Standard
| 33***06 | Glass, Screen, Right Hand | 1 |
| 33***60 | Glass, Front Screen | 1 |
| 33***39 | G.A, Cab Trim | 1 |
B2-11-1 Cab Seats, Installation
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M8x25 | 9 |
B2-1-20 Cab Mountings
| 13***0D | Bolt, M20 X 100 | 1 |
| 13***1D | Bolt, M20 X 110 | 3 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-9-2 Cab Base Insulation, External
| 14***1D | Washer, Large | 8 |
| 33***85 | G.A, Cab Common Parts | 1 |
| 33***33 | Assembly, Soundproofing, Underfloor | 1 |
B2-3-1 Door, Left Hand
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***9D | Setscrew, M8x35 | 4 |
B2-6-1 Cab Rivet Nut, Locations
| 13***07 | Nut, M5 Weld-On | 2 |
| 13***07 | Nut, Weld | 17 |
| 26***01 | Clip, Connector | 1 |
B2-7-1 Console Installation, Right Hand
| 13***3D | Screw, M5x16 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 33***81 | Ashtray | 1 |
B2-3-2 Door Interlock
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 13***1D | Nut, Plain | 2 |
| 13***1D | Nut, Plain, M4 | 1 |
B2-7-3 Decu Housing, Components
| 13***2D | Nut | 2 |
| 13***1D | Capscrew, M4x10 | 4 |
| 14***4D | Washer, Plain M4 | 6 |
B2-6-4 B Post External Trim
| 33***90 | G.A, B-Post External, Mouldings P140/143 | 1 |
| 33***91 | Cover, B Post, Outer Left Hand | 1 |
| 33***92 | Retainer, B Post, Left Hand | 1 |
B2-9-1 Cab Base, Access Covers
| 33***39 | G.A, Cab Trim | 1 |
| 33***70 | Plate, Limp Home Access | 2 |
| 33***27 | Plate, Cab Mounting Access | 1 |
B2-19-1 Covers, Access, Cab Base
| 33***55 | Floor Plate Gasket | 1 |
| 33***56 | Access Plate Gasket | 2 |
| 33***57 | Mount Access Plate G | 1 |
B2-20-1 Covers, Access, Cab Trim
| 33***39 | G.A, Cab Trim | 1 |
| 33***70 | Plate, Limp Home Access | 2 |
| 33***14 | Plate, Access | 1 |
B2-9-3 Cab Base Insulation, Internal
| 33***26 | Panel, Insulation | 1 |
| 33***56 | Panel, Insulation | 1 |
B2-5-1 Cab Roof
| 12***01 | Plate, Beacon Mounting | 1 |
| 14***6D | Washer, M6 Plain | 4 |
| 33***85 | G.A, Cab Common Parts | 1 |
B2-4-1 Window, Rear Opening, Standard
| 12***09 | Cap, Nut M8; Replaces 69***72 | 1 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Setscrew, M8x35 | 4 |
B2-7-8 Toolbox
| 12***71 | Padlock | 1 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***5D | Setscrew, M8x20 | 2 |
B2-8-1 Cab Roof Liner, & Fittings
| 14***5D | Washer | 7 |
| 14***7D | Washer, M8 Plain | 16 |
| 14***8D | Washer, M10 | 2 |
B2-3-3 Door Check Strap
| 13***6D | Screw, Cap M8 X 70 | 2 |
| 33***85 | G.A, Cab Common Parts | 1 |
| 33***57 | G.A, Check Strap | 1 |
B2-6-5 A Post Internal Trim
| 14***1D | Washer, 1/4" Medium | 4 |
| 33***00 | Vent, Air,(60mm Dia.Hole) | 4 |
| 33***23 | G.A, A-Post Plenums | 1 |
B2-7-4 Steering Column Trim
| 13***5D | Screw, Cap M5 X 20 | 4 |
| 14***5D | Washer | 4 |
| 33***85 | G.A, Cab Common Parts | 1 |
B2-3-13 Mirrors, External, Standard
| 12***09 | Cap, Nut M8; Replaces 69***72 | 1 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***9D | Bolt, M5 X 35mm Long | 4 |
B2-4-2 Window, Rear Opening, Winterised
| 12***09 | Cap, Nut M8; Replaces 69***72 | 1 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Setscrew, M8x35 | 4 |
B2-6-2 Rear Bulkhead, & Fuse Cover
| 24***13 | Grommet, 31.8 Panel Hole X 3504 X 5 Thkness | 1 |
| 33***85 | G.A, Cab Common Parts | 1 |
| 33***28 | G.A, Rear Bulkhead Mldg | 1 |
B2-3-21 Mirror, Auxiliary, German Homologation
| 13***7D | Setscrew, M8x25 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***85 | G.A, Auxiliary Mirror, German Homologation | 1 |
B2-7-5 Front Console
| 13***7D | Setscrew, M8x25 | 2 |
| 13***1D | Nut, Plain M5 | 4 |
| 13***7Z | Capscrew | 2 |
B2-9-6 Hvac Duct Insulation
| 33***84 | Duct Insulation Inta | 1 |
| 33***85 | Duct Insulation Fron | 1 |
| 33***86 | Duct Insulation Fron | 1 |
B2-7-2 Stowage Box, Left Hand
| 14***02 | Screw | 4 |
| 33***85 | G.A, Cab Common Parts | 1 |
| 33***76 | G.A, Lh Stowage Box | 1 |
B2-3-31 Mirror, Interior, Rear View
| 12***78 | Mirror, Interior | 1 |
| 33***90 | G.A, Rear View Mirror, Right Hand | 1 |
| 33***85 | G.A, Rear View Mirror, Left Hand | 1 |
B2-1-11 Cab, Assembly, Winterised
| 33***06 | Glass, Screen, Right Hand | 1 |
| 33***27 | Frame, Cab | 1 |
| 33***56 | Cab, Winterised Assembly Yellow Abi | 1 |
B2-8-2 Cab Roof Liner, & Fittings
| 14***5D | Washer | 6 |
| 14***7D | Washer, M8 Plain | 14 |
| 14***02 | Screw | 3 |
B2-12-1 Seat Armrest, Components
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***8D | Bolt, M10 X 80 | 1 |
| 13***3D | Nut, Self Lock M8 | 4 |
B2-9-4 Cab Floormat
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 33***85 | G.A, Cab Common Parts | 1 |
B2-3-11 Mirrors, External, Standard
| 13***9D | Bolt, M10 X 35mm Long | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
| 33***60 | Mirror, External | 1 |
B2-2-1 Direct Glazing, Replacement Material
| 33***19 | G.A, Glass Pack | 1 |
| 33***88 | Cab, Assembly, Yellow Abi | 1 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
B2-6-8 Hvac Ducting
| 13***3D | Setscrew | 35 |
| 13***5D | Setscrew, M6 X 20mm Long | 14 |
| 13***3D | Nut, M6 Lock | 4 |
B2-14-1 Blind, Sun
| 13***3D | Nut, Lock M5 | 2 |
| 14***5D | Washer | 2 |
| 33***10 | G.A, Headliner Components, P140/P143 | 1 |
B5-1-1 Cab Decals
| 33***58 | Decal, Armrest Control | 1 |
| 33***20 | Decal, Sheet | 1 |
| 48***08 | G.A, Common Decals | 1 |
B5-2-1 Labels, Safety, Iso
| 33***60 | Label, Sheet, Fastrac Iso | 1 |
| 81***72 | Plate, Homologation | 1 |
| 81***38 | Decal, 40 Kph | 1 |
B5-3-1 Tool Kit, Park Brake Release
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 47***00 | Kit, Parkbrake Release | 1 |
| 47***01 | Spanner | 2 |
B5-11-1 Labels, Safety, Usa, Ansi
| 33***88 | G.A, Handbook & Labels, Ansi Safety Usa | 0 |
| 33***59 | Label, Sheet, Fastrac Ansi | 1 |
| 81***82 | Label, Warning, Drawbar | 1 |
C Electrics-Machine, Cab & Engine
C1-9-1 Switches, Rear Hitch Position, & Pto Cut-Out
| 33***23 | Harness, Rear Fender | 1 |
| 33***77 | G.A, Rear Fender Switches | 1 |
| 33***00 | Harness, Rear Fender Link | 1 |
C1-2-13 Harness Retention, Chassis, Engine Bay
| 13***3D | Screw | 1 |
| 13***7D | Setscrew, M12 X 25 Grade 10.9 | 1 |
| 14***8D | Washer, M10 | 1 |
C1-4-1 Headlamp, Cab, Left Hand
| 33***82 | G.A, Lh Dip H/L, Rear Bul, P140 | 1 |
| 70***92 | Light, Head 12v Assembly, L/H Dip L/H Mounted | 1 |
| 70***93 | Light, Head 12v Assembly, L/H Dip R/H Mounted | 1 |
C1-5-10 Rear, Lights, Assembly C/W Spacer Plate
| 13***1D | Nut, Plain, M4 | 16 |
| 14***4D | Washer, Plain M4 | 16 |
| 33***54 | Lens, Reflector - 95mm Red | 2 |
C1-6-1 Lamps
C1-2-2 Cab Harness, Cvt Gearbox
| 13***5D | Capscrew, M6 X 20 | 12 |
| 14***6D | Washer, M6 Plain | 12 |
| 33***43 | Gasket, Harness Plate | 1 |
C1-11-1 Horn
| 33***42 | G.A, Chassis Common Elect, P140 | 0 |
| 33***91 | G.A, Chassis Electrics, P143 | 0 |
| 70***00 | Horn, Disc 12v | 1 |
C1-2-11 Cab Harness, Protection & Fixings
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 30 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 15 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 15 |
C1-3-2 7 Pin Trailer Socket, Single
| 13***9D | Setscrew | 3 |
| 13***3D | Nut, Lock M5 | 3 |
| 26***01 | Clip, Connector | 1 |
C1-9-4 Switches, Front Hitch Control
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***1D | Nut, M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
C1-7-1 Light, Reflector, Rear
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***3D | Nut, Lock M6 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
C1-2-12 Chassis Harness, Protection & Fixings
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 90 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 50 |
C1-3-3 7 Pin Trailer Socket, Sae Single
| 13***9D | Setscrew | 3 |
| 13***3D | Nut, Lock M5 | 3 |
| 33***56 | Bracket, Trailer Socket | 1 |
C1-10-1 Radar Installation
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 14***6D | Washer, M6 Plain | 7 |
| 14***6D | Washer, Spring, M6 | 3 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 14***7Z | Washer, Shakeproof | 1 |
| 33***15 | G.A, Electrical Cab P140 | 1 |
C1-3-4 7 Pin Trailer Socket, Twin
| 13***9D | Setscrew | 3 |
| 13***3D | Nut, Lock M5 | 3 |
| 26***01 | Clip, Connector | 1 |
C1-10-2 Radar Installation
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 14***6D | Washer, M6 Plain | 7 |
| 14***6D | Washer, Spring, M6 | 3 |
C1-1-1 Battery & Isolator
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***2D | Bolt | 1 |
C1-4-2 Headlamp, Cab, Light Hand
| 33***90 | G.A, Rh Dip H/L, Rear Bul, P140 | 1 |
| 70***94 | Light, Head 12v Assembly, R/H Dip L/H Mounted | 1 |
| 70***95 | Light, Head 12v Assembly, R/H Dip R/H Mounted | 1 |
C1-2-4 Abs Harnesses, & Wheel Sensor
| 33***65 | Actuator, Switch, Abs Diagnostic | 1 |
| 33***78 | Switch | 1 |
| 33***27 | Harness, Abs Chassis | 1 |
C1-2-3 Harnesses, Chassis & Pannier
| 13***7D | Setscrew, M8x25 | 4 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-1-11 Battery Power Leads
| 33***95 | Cable, Battery Ve4 | 1 |
| 33***96 | Cable, Battery Ve5 | 1 |
| 33***97 | Cable, Battery Ve6 | 1 |
C1-2-7 Harnesses, Extension, Front Headlight & Worklight
| 33***10 | Harness, Extension, Working Light | 2 |
| 33***12 | Harness, Extension, Headlight | 2 |
| 33***88 | G.A, Front Light Bars | 0 |
C1-5-1 Lights, Rear, Stop/Tail, Indicator, Fog & Reversing
| 33***54 | Lens, Reflector - 95mm Red | 2 |
| 33***40 | Light, Rear Fog | 1 |
| 33***09 | Light, Stop/Tail | 2 |
C1-7-2 Light, Reflector, Side
| 13***3D | Nut, M6 Lock | 1 |
| 14***6D | Washer, M6 Plain | 1 |
| 14***04 | Screw | 4 |
C1-9-2 Sensor, Rear Hitch Control
| 34***09 | G.A, Top Arm Assembly | 1 |
| 71***63 | Sensor, Angle | 1 |
| 82***60 | Pin, Roll, D=2 X L=16 | 2 |
C1-2-1 Cab Harnesses, 6 X 4 Gearbox
| 13***5D | Capscrew, M6 X 20 | 12 |
| 14***6D | Washer, M6 Plain | 12 |
| 33***43 | Gasket, Harness Plate | 1 |
C1-2-6 Trailer Electrics, Safim
| 33***17 | Indicator, Parkbrake | 1 |
| 33***08 | Harness, Safim Valve, Cab | 1 |
| 33***10 | Harness, Safim P140 Cab | 1 |
C2-1-2 Harnesses, Ecu
| 02***56 | Clip | 1 |
| 02***57 | Clip | 1 |
| 02***82 | Screw | 1 |
C2-1-10 Ecu Unit
| 02***74 | Screw, M8 X 45 | 8 |
| 02***64 | Screw | 1 |
| 02***93 | Screw | 2 |
C2-1-1 Engine Power Circuit
| 33***38 | Cable, Battery +Ve2 | 1 |
| 33***41 | Cable, Battery -Ve2 | 1 |
C2-3-1 Motor, Starter, 12.Volt
| 02***72 | Screw, 12 Point Cap | 3 |
| 71***01 | Motor, Starter | 1 |
C2-3-2 Starter Motor, Heatshield
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***8D | Setscrew, M10 X 30 | 2 |
C2-2-1 Grid Heater Megafuse, Installation
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
C2-6-1 Engine Block Heater, 120v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-6-2 Engine Block Heater, 240v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-4-1 Alternator
| 71***93 | Alternator | 1 |
C2-5-1 Alternator, Mounting Brackets
| 02***07 | Bolt, M8x1.25x25 | 1 |
| 02***19 | Screw | 1 |
| 02***26 | Nut, Flange Head | 1 |
C2-1-11 Switches & Sensors
| 02***79 | Screw | 1 |
| 02***73 | O Ring | 1 |
| 02***81 | Screw, Socket Head | 1 |
C2-4-2 Alternator, Fastrac 7270
| 33***54 | Alternator, . | 1 |
C3-3-3 Switch, Auxiliary Headlights
| 33***80 | G.A, Cab Headlights | 1 |
| 33***12 | G.A, Auxiliary Headlight Switch, P140/143 | 1 |
| 70***94 | Actuator, Boom Worklight | 1 |
C3-12-1 Headlamp, Cab, Right Hand
| 13***5D | Setscrew, M8x20 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***80 | G.A, Cab Headlights | 1 |
C3-9-3 Heater Hose, Installation
| 22***05 | Clip, Jubilee | 4 |
| 33***78 | Hose, Heater Return | 1 |
| 33***65 | G.A, Air Conditioning | 1 |
C3-7-1 Light, Cab Interior
| 14***5D | Washer | 2 |
| 33***74 | G.A, Common Controls | 1 |
| 33***95 | Bracket, Door Switch Mounting | 1 |
C3-5-4 Pcb Adaptor Harness
| 33***90 | G.A, Pcb Installation, Assembly P140/143 | 1 |
| 33***61 | Harness, Pcb Adaptor | 2 |
C3-14-2 Power Supply, Auxiliary, Without Convenience Socket
| 13***7D | Setscrew, M8x25 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***49 | Plate, Auxiliary Mounting | 1 |
C3-6-1 Ecu1 Installation, 6 X 4 Gearbox
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***2D | Setscrew, M8 X 50 | 4 |
| 13***3D | Nut, Self Lock M8 | 10 |
C3-4-2 Joystick Control, 6 X 4
| 14***6D | Washer, M6 Plain | 4 |
| 33***54 | Gaiter, Joystick | 1 |
| 33***15 | Controller, Joystick Abi, 6 X 4 | 1 |
C3-12-14 Light, Number Plate
| 24***09 | Grommet | 2 |
| 33***83 | Gasket, Foam, Number Plate Light | 1 |
| 33***15 | G.A, Electrical Cab P140 | 1 |
C3-8-1 Radio, Optional
| 33***17 | Bracket, Radio Rear Support | 1 |
| 33***74 | G.A, Common Controls | 1 |
| 33***15 | G.A, Electrical Cab P140 | 1 |
C3-3-1 Control Panel, Right Hand Console
| 33***15 | Switch, Electric Mirror | 1 |
| 33***89 | G.A, Controls Console, P140 | 1 |
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
C3-9-7 Air Conditioning, Hvac Controls
| 14***3D | Washer, M3 | 3 |
| 14***4D | Washer, Plain M4 | 3 |
| 30***75 | Panel, Atc Climate Control | 1 |
C3-12-3 Light, Working, 4 Front & 4 Rear
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***97 | Cable, Battery Ve6 | 1 |
C3-1-1 Steering Column, Controls
| 13***3Z | Capscrew | 2 |
| 33***30 | Setscrew, M4 X 8 | 3 |
| 33***74 | G.A, Common Controls | 1 |
C3-9-6 Air Conditioning, Air Recirculation, Motor
| 33***36 | G.A, Heating Ventilation Air Conditioning Components | 1 |
| 33***47 | Motor, Dual Fan | 1 |
| 48***15 | I.A, Air Conditioning, System P140 | 1 |
C3-5-11 Decu Assembly
| 13***1D | Nut, Plain | 1 |
| 14***0Z | Washer | 1 |
| 14***6D | Washer, M6 Plain | 1 |
C3-9-5 Air Conditioning, Air Recirculation, Mode Box
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***1D | Nut, Plain | 2 |
| 33***54 | Gasket, Mode Box | 1 |
C3-12-16 Lights, Working, Xenon Installation, Cab Rear
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5D | Screw, M8 X 30 | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
C3-12-13 Light, High Level Brake
| 24***13 | Grommet, 31.8 Panel Hole X 3.5 Thk | 1 |
| 33***74 | G.A, Common Controls | 1 |
| 33***02 | G.A, Headliner Electrical, Fittings P140/P143 | 1 |
C3-12-6 Light, Working, 8 Front & 6 Rear, With 2 Front & 2 Rear Xenon
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***96 | G.A, Zenon Worklights, 8fr X 6rr | 1 |
C3-5-5 Pcb Installation, Main
| 13***03 | Nut | 6 |
| 14***05 | Washer, 'P' | 6 |
| 33***69 | Spacer, Nylon | 6 |
C3-3-11 Armrest Controls
| 13***2D | Capscrew | 8 |
| 33***74 | G.A, Common Controls | 1 |
| 33***59 | G.A, Armrest Controls | 1 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 2 |
| 33***04 | G.A, Rear Wiper | 1 |
| 64***25 | Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 3000mm, Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 2500mm, Tube, 5 Metres Long, Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1200mm (600mm Per Pump To Valve), Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1400mm (700mm Per Pump To Valve), Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 5000mm, Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 4000mm | 1 |
C3-6-12 Spool Valve Control, 3 Way
| 13***3D | Nut, Locking M4 | 4 |
| 13***2D | Capscrew | 4 |
| 33***88 | Unit, Engine Control Unit, 3 Spool | 1 |
C3-5-3 Control Box, Working Lights, Auxiliary
| 33***87 | I.A, Worklight Installati, On | 1 |
| 33***77 | Relay, Micron Mvec, 303-1ah-C | 0 |
| 33***49 | Box, Mvec Abi, Working Lights | 1 |
C3-9-8 Air Conditioning, Speed Controller
| 13***3D | Setscrew, M4 X 16 | 2 |
| 13***3D | Nut, Locking M4 | 2 |
| 14***4D | Washer, Plain M4 | 4 |
C3-12-4 Light, Working, 6 Front & 4 Rear
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***97 | Cable, Battery Ve6 | 1 |
C3-5-1 Pcb Installation, Main, Non Winterpack
| 13***3D | Nut, Lock M5 | 6 |
| 14***5D | Washer | 6 |
| 33***69 | Spacer, Nylon | 6 |
C3-11-1 Washer Kit, Windscreen
| 13***7D | Screw, M6 X 25mm | 3 |
| 13***2D | Bolt | 2 |
| 13***3D | Nut, M6 Lock | 2 |
C3-12-15 Lights, Working, Xenon Installation, Cab Front
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5D | Screw, M8 X 30 | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
C3-12-2 Light, Working, 2 Front & 2 Rear
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***97 | Cable, Battery Ve6 | 1 |
C3-5-2 Pcb Installation, Auxiliary Headlights
| 13***1D | Setscrew, M5 X 12mm Long | 3 |
| 14***5D | Washer | 3 |
| 33***80 | G.A, Cab Headlights | 1 |
C3-9-1 Hvac Unit, Installation
| 13***7D | Setscrew, M8x25 | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
C3-9-2 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***1D | Bolt, M8 X 110 | 4 |
C3-12-11 Light, Indicator, Side
| 13***5D | Setscrew, M8x20 | 4 |
| 13***1D | Nut, Plain, M4 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
C3-6-14 Spool Valve Control, 5 Way
| 13***3D | Nut, Locking M4 | 4 |
| 13***2D | Capscrew | 4 |
| 33***85 | Unit, Engine Control Unit, 5 Spool | 1 |
C3-12-5 Light, Working, 8 Front & 6 Rear
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***97 | Cable, Battery Ve6 | 1 |
C3-14-1 Power Supply, Auxiliary, With Convenience Socket
| 13***7D | Setscrew, M8x25 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 33***49 | Plate, Auxiliary Mounting | 1 |
C3-3-2 Control Panel, Winter Pack
| 33***60 | Lead, Earth, Heated Windscreen | 2 |
| 33***68 | G.A, Control With Winter, Pack | 1 |
| 33***36 | Harness, Heated Front Screen | 1 |
C3-12-12 Light, Working, Auxiliary Waist, 'A'Post
| 13***5D | Setscrew, M8x20 | 4 |
| 13***1D | Nut, Plain, M4 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
C3-8-2 Lead, Ipod Socket To Phono
| 33***92 | Adapter, 3.5mm Jack To Jack, Stereo | 2 |
| 33***60 | Lead, 3.5mm Jack, T0 Pphono Plugs | 1 |
| 33***47 | Harness, Ipod Socket | 1 |
C3-9-21 Air Conditioning, Unit
| 13***3Z | Bolt, M6 X 16, Flange Reduced Hex | 1 |
| 14***06 | Washer, Hardened | 1 |
| 30***02 | Washer, Locking | 1 |
C3-6-2 Ecu1 Installation, V-Tronic Gearbox
| 13***3D | Setscrew | 6 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***9D | Capscrew, M6 X 35 | 3 |
C3-9-4 Air Conditioning, Mode Box Controls
| 13***3D | Nut, Locking M4 | 11 |
| 13***7D | Capscrew, M4 X 25 | 4 |
| 13***0D | Capscrew, M4 X 40 | 2 |
C3-4-1 Joystick Control, Cvt
| 14***6D | Washer, M6 Plain | 4 |
| 33***54 | Gaiter, Joystick | 1 |
| 33***21 | Controller, Joystick Abi, Cvt | 1 |
C3-10-1 Wash/Wipe, Front Screen
| 13***5D | Screw, Set | 3 |
| 14***7D | Washer, M8 Plain | 3 |
| 26***00 | Clip | 1 |
C3-6-13 Spool Valve Control, 4 Way
| 13***3D | Nut, Locking M4 | 4 |
| 13***2D | Capscrew | 4 |
| 33***38 | Unit, Engine Control Unit, 4 Spool | 1 |
D Controls-Machine, Engine & Steering
D1-14-1 Pickup Hitch, Control, Rockinger 850d (30mm Auto)
| 33***36 | Coupling, Trailer Towing, 850d30 | 1 |
| 33***06 | G.A, Puh Release | 1 |
| 33***07 | G.A, Rockinger 860d (38mm, Ladder Coupling | 1 |
D1-13-1 Pickup Hitch, Control, Rockinger 860d (38mm Auto)
| 33***37 | Coupling, Trailer Towing, 860d30 | 1 |
| 33***06 | G.A, Puh Release | 1 |
| 33***53 | Label, Hitch Release | 1 |
D1-5-11 Clutch Control, Cvt Gearbox
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***1D | Nut, Plain, M4 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
D1-5-2 Clutch Pedal Damper
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***6D | Bolt, M6x70 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
D1-3-1 Clutch Control, Circuit
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***1D | Setscrew, M8x45 | 1 |
D1-5-12 Clutch Control, 6 X 4 Gearbox
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***1D | Nut, Plain, M4 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
D1-8-1 Control, Pick Up Hitch
| 13***2D | Bolt, M10 X 50 | 2 |
| 14***8D | Washer, M10 | 2 |
| 23***20 | Knob, Control Lever | 1 |
D1-5-1 Clutch Pedal
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***0D | Setscrew, M10 X 40mm | 1 |
D1-7-1 Control, Power Take Off
| 13***7D | Setscrew, M8x25 | 2 |
| 13***7D | Capscrew, M10 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
D1-12-1 Pickup Hitch, Control, Rockinger 850d (30mm Auto)
| 33***36 | Coupling, Trailer Towing, 850d30 | 1 |
| 33***06 | G.A, Puh Release | 1 |
| 33***53 | Label, Hitch Release | 1 |
D1-10-1 Pickup Hitch, Control, Rockinger 860d (38mm Auto)
| 33***37 | Coupling, Trailer Towing, 860d30 | 1 |
| 33***06 | G.A, Puh Release | 1 |
| 33***86 | G.A, Rockinger 860d (38mm, Ladder Coupling | 1 |
D1-4-1 Brake Pedal, Foot
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***2D | Nut, Thin 1/2in Unf | 2 |
| 13***1D | Nut, M8 | 2 |
D1-9-1 Control, Pick Up Hitch, With Trailer Couplings
| 23***20 | Knob, Control Lever | 1 |
| 33***34 | Grommet | 1 |
| 33***42 | Bolt, Shoulder | 1 |
D1-11-1 Lever, Pick Up Hitch
| 22***15 | Circlip | 1 |
| 23***20 | Knob, Control Lever | 1 |
| 33***94 | Screw, Countersunk Socket, M10 | 1 |
D2-1-1 Control, Hand Throttle
D2-2-1 Control, Throttle, Foot
| 13***7D | Setscrew M5x25 | 1 |
| 13***3D | Setscrew | 1 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
D3-4-1 Sensor, Steering Position
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Setscrew, M16x16 | 2 |
| 13***1Z | Nut | 4 |
D3-2-1 Steering Shafts, Installation, Engine Bay
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
| 14***8D | Washer, M10 | 8 |
D3-4-2 Sensor, Steering Position
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***9D | Screw, M16x35lg | 2 |
D3-3-1 Steering Box, Pitman Arm/Draglink, Installation
| 10***74 | Nut | 1 |
| 21***12 | Pin, Split | 2 |
| 33***57 | G.A, Steering Box, & Draglink | 1 |
D3-1-1 Steering Column, & Steering Shafts, Installation, Cab
| 14***2D | Washer, Large | 2 |
| 14***7D | Washer, M8 Plain | 8 |
| 21***22 | Pin, Tension | 1 |
D3-5-1 Steering, Assist Ram & Damper
| 13***9D | Screw, M12x35mm Long | 4 |
| 13***7D | Bolt, M12 X 75mm Long | 1 |
| 13***3D | Nut, M12 | 1 |
E Hydraulics & Air Including, Steering
E1-4-3 Circuit, Steering Ram
| 23***06 | O Ring, 3/8"Bsp | 8 |
| 24***05 | O Ring | 1 |
| 33***70 | G.A, Ram, Steering Assistor | 1 |
E1-10-2 Circuit,Power Beyond, 85cc Pump Cvt
| 13***9D | Setscrew, M10 X 35mm Long | 1 |
| 13***4D | Bolt | 2 |
| 13***6Z | Nut, Lock | 1 |
E1-1-22 Circuit, Returns, Front & Rear Flow
| 23***11 | O Ring, 5/8"Bsp | 4 |
| 33***13 | Hose, 5/8"Bsp X 1030mm | 1 |
| 33***15 | Decal, Free Flow Return | 1 |
E1-12-1 Circuit, Auxiliary, 4th Spool, Front
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt, M10 X 35mm Long | 1 |
| 13***0D | Bolt, M10 X 40mm Long | 1 |
E1-8-1 Circuit, Auxiliary, 3 Spool, Rear
| 23***10 | O Ring, 1/2"Bsp | 8 |
| 23***11 | O Ring, 5/8"Bsp | 4 |
| 27***06 | Tie, Cable 385mm Long | 1 |
E1-2-2 Cooling Circuit, Cvt Gearbox
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
| 14***8D | Washer, M10 | 8 |
E1-17-2 Circuit, Suspension
| 13***7D | Screw, M6 X 25mm | 7 |
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***0D | Bolt, M6x100mm | 3 |
E1-16-1 Circuit, Transmission Test
| 13***5D | Setscrew, M8x20 | 1 |
| 13***2Z | Nut | 3 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-10-1 Circuit,Power Beyond, 60cc Pump Cvt
| 13***9D | Setscrew, M10 X 35mm Long | 1 |
| 13***4D | Bolt | 2 |
| 13***6Z | Nut, Lock | 1 |
E1-1-11 Suction Hoses, Hydraulic Pump 60cc, Cvt Gearbox
| 13***5D | Capscrew, M6 X 20 | 4 |
| 13***5D | Capscrew; Replaces 82***45 | 4 |
| 13***7D | Capscrew, M12 X 25 | 4 |
E1-1-13 Load Sensing Hoses, Hydraulic Pump 60cc, Cvt Gearbox
| 13***8D | Capscrew, M10x30 | 4 |
| 16***56 | Adaptor | 1 |
| 23***06 | O Ring, 3/8"Bsp | 2 |
E1-4-1 Circuit, Steering, 6 X 4 Gearbox
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-1-14 Load Sensing Hoses, Hydraulic Pump 85cc, Cvt Gearbox
| 13***9D | Bolt, M14 X 90 | 4 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 1 |
| 16***50 | Adaptor | 1 |
E1-1-21 Circuit, Hydraulic Returns
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt | 1 |
| 13***3D | Nut, M6 Lock | 3 |
E1-2-1 Cooling Circuit, 6 X 4 Gearbox
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***9D | Bolt, M10 X 35mm Long | 2 |
E1-17-12 Circuit, Suspension, Pump Feed, 6 X 4 Gearbox
| 13***5D | Capscrew, M6 X 20 | 2 |
| 13***0D | Capscrew, M6 X 40 | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E1-5-2 Circuit, Differential Lock, (3/8")
| 13***7D | Screw, M6 X 25mm | 7 |
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***3D | Nut, M6 Lock | 9 |
E1-17-1 Circuit, Suspension
| 13***7D | Screw, M6 X 25mm | 7 |
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***0D | Bolt, M6x100mm | 3 |
E1-13-1 Circuit, Rear Hitch
| 23***10 | O Ring, 1/2"Bsp | 6 |
| 24***05 | O Ring | 1 |
| 33***08 | Hose, 1/2"Bsp X 1260mm | 1 |
E1-11-1 Circuit, Auxiliary, 3rd Spool, Front
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt, M10 X 35mm Long | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
E1-1-12 Suction Hoses, Hydraulic Pump 85cc, Cvt Gearbox
| 13***5D | Capscrew, M6 X 20 | 4 |
| 13***5D | Capscrew; Replaces 82***45 | 4 |
| 13***7D | Capscrew, M12 X 25 | 4 |
E1-1-4 Load Sensing Hoses, Hydraulic Pump 85cc, 6 X 4 Gearbox
| 13***9D | Bolt, M14 X 90 | 4 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 1 |
| 16***50 | Adaptor | 1 |
E1-7-1 Circuit, Front Hitch
| 13***9D | Setscrew, M8x35 | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
| 13***3D | Nut, Self Lock M8 | 1 |
E1-9-1 Circuit, Auxiliary, 4 Spool, Rear
| 23***10 | O Ring, 1/2"Bsp | 12 |
| 23***11 | O Ring, 5/8"Bsp | 4 |
| 27***06 | Tie, Cable 385mm Long | 1 |
E1-17-11 Circuit, Suspension, Pump Feed, Cvt Gearbox
| 13***5D | Capscrew, M6 X 20 | 2 |
| 13***0D | Capscrew, M6 X 40 | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E1-1-1 Suction Hoses, Hydraulic Pump 60cc, 6 X 4 Gearbox
| 13***5D | Capscrew, M6 X 20 | 1 |
| 13***5D | Capscrew; Replaces 82***45 | 4 |
| 13***7D | Capscrew, M12 X 25 | 4 |
E1-10-12 Circuit,Power Beyond, 85cc Pump 6 X 4
| 13***9D | Setscrew, M10 X 35mm Long | 1 |
| 13***4D | Bolt | 2 |
| 13***6Z | Nut, Lock | 1 |
E1-10-11 Circuit,Power Beyond, 60cc Pump 6 X 4
| 13***9D | Setscrew, M10 X 35mm Long | 1 |
| 13***4D | Bolt | 2 |
| 13***6Z | Nut, Lock | 1 |
E1-1-3 Load Sensing Hoses, Hydraulic Pump 60cc, 6 X 4 Gearbox
| 13***8D | Capscrew, M10x30 | 4 |
| 16***56 | Adaptor | 1 |
| 23***06 | O Ring, 3/8"Bsp | 2 |
E1-1-2 Suction Hoses, Hydraulic Pump 85cc, 6 X 4 Gearbox
| 13***5D | Capscrew, M6 X 20 | 4 |
| 13***5D | Capscrew; Replaces 82***45 | 4 |
| 13***7D | Capscrew, M12 X 25 | 4 |
E1-4-2 Circuit, Steering, Cvt Gearbox
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-5-1 Circuit, Differential Lock, (1/4")
| 13***7D | Screw, M6 X 25mm | 7 |
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***3D | Nut, M6 Lock | 9 |
E2-1-1 Pump, Steer & Suspension
| 13***7D | Capscrew, M10 | 2 |
| 14***8D | Washer, M10 | 2 |
| 20***02 | Pump, Assembly, Steering/Suspension | 1 |
E2-5-2 Pump 85cc, Relief Valve
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 1 |
| 17***03 | Plug, Blanking | 1 |
E2-2-2 Pump 85cc, Main/Auxiliary, Hydraulic, 6 X 4 Gearbox
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 2 |
| 14***1D | Washer, M16 | 2 |
| 20***01 | Pump, Assembly, Varaiable Flow | 1 |
E2-3-1 Pump, Steer & Suspension, Cvt Gearbox
| 13***7D | Capscrew, M10 | 2 |
| 14***8D | Washer, M10 | 2 |
| 20***00 | Pump, Assembly, Steering/Suspension | 1 |
E2-5-1 Pump 60cc, Relief Valve
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 1 |
| 17***03 | Plug, Blanking | 1 |
E2-4-1 Pump 60cc, Main/Auxiliary, Hydraulic, Cvt Gearbox
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 2 |
| 14***1D | Washer, M16 | 2 |
| 20***05 | Pump, Assembly, Variable Flow | 1 |
E2-4-2 Pump 85cc, Main/Auxiliary, Hydraulic, Cvt Gearbox
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 2 |
| 14***1D | Washer, M16 | 2 |
| 20***56 | Pump, Variable Flow | 1 |
E2-2-1 Pump 60cc, Main/Auxiliary, Hydraulic, 6 X 4 Gearbox
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 2 |
| 14***1D | Washer, M16 | 2 |
| 20***06 | Pump, Assembly, Variable Flow | 1 |
E3-3-1 Valve, Draft Control, Section
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 1 |
| 25***66 | Plug | 2 |
E3-7-1 Valve, Directional Control, Section Std Flow
| 25***74 | Valve, Shuttle | 1 |
| 25***75 | Kit, Seals | 1 |
| 25***76 | Kit, Repair | 1 |
E3-10-2 Valve, Suspension
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 25***96 | Cartridge, Unloading | 1 |
E3-4-1 Valve, Directional Control, Section
| 25***74 | Valve, Shuttle | 1 |
| 25***75 | Kit, Seals | 1 |
| 25***76 | Kit, Repair | 1 |
E3-2-1 Valve, Section, Inlet
| 25***05 | Valve, Section, End Cover | 1 |
| 25***06 | O Ring | 1 |
| 25***07 | Adapter, Restrictor | 1 |
E3-1-1 Valve, Assembly, Electronic 3 Spool, And Adapters
| 13***8D | Setscrew, M10 X 30 | 1 |
| 14***09 | Seal; Supplied With Item 1. Remove To Fit Item 18, Seal | 1 |
| 14***36 | Mounting, Bonded | 4 |
E3-1-13 Valve, Assembly, Electronic 5 Spool, And Adapters, High Flow
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***09 | Seal; Supplied With Item 1. Remove To Fit Item 18, Seal | 1 |
| 14***36 | Mounting, Bonded | 4 |
E3-1-3 Valve, Assembly, Electronic 5 Spool, And Adapters
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***09 | Seal; Supplied With Item 1. Remove To Fit Item 18, Seal | 1 |
| 14***36 | Mounting, Bonded | 4 |
E3-10-1 Valve, Suspension Charge
| 25***33 | Kit, Seal | 1 |
| 25***55 | Cartridge, Valve, Excl. Coil; Part No. Duplication,Replaced By 69***57., Requested By S Waterhouse/P Wallace | 1 |
| 25***96 | Cartridge, Unloading | 1 |
E3-8-1 Valve, Endplate, Section
| 25***54 | Plug | 1 |
| 25***66 | O Ring | 1 |
| 25***69 | Filter | 1 |
E3-5-1 Valve, Directional Control, Section
| 25***74 | Valve, Shuttle | 1 |
| 25***75 | Kit, Seals | 1 |
| 25***76 | Kit, Repair | 1 |
E3-1-12 Valve, Assembly, Electronic 4 Spool, And Adapters, High Flow
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***09 | Seal; Supplied With Item 1. Remove To Fit Item 18, Seal | 1 |
| 14***36 | Mounting, Bonded | 4 |
E3-6-1 Valve, Directional Control, Section Hi Flow
| 25***74 | Valve, Shuttle | 1 |
| 25***75 | Kit, Seals | 1 |
| 25***76 | Kit, Repair | 1 |
E3-1-2 Valve, Assembly, Electronic 4 Spool, And Adapters
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***09 | Seal; Supplied With Item 1. Remove To Fit Item 18, Seal | 1 |
| 14***36 | Mounting, Bonded | 4 |
E4-5-1 Ram, Rear Hitch, 80mm
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
| 47***96 | Bearing, Assembly; Cbm Would Not Supply To Jcb.But Skf P/No, Gem 45 Es-2rs. Supplier Code 00220.San 09757 | 1 |
E4-5-3 Ram, Rear Hitch, 90mm
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
| 47***96 | Bearing, Assembly; Cbm Would Not Supply To Jcb.But Skf P/No, Gem 45 Es-2rs. Supplier Code 00220.San 09757 | 1 |
E4-5-2 Ram, Rear Hitch, 85mm
| 47***05 | Nipple, Grease | 2 |
| 47***04 | Ring, Retaining, 85mm Ram | 1 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
E4-3-1 Ram, Steering
| 33***39 | Ram, Steering Assister | 1 |
| 47***25 | Gaiter | 2 |
| 47***29 | Nut, Hexagonal | 1 |
E4-2-2 Ram, Suspension, 'Cushioned', 45mm Heavy Duty
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***13 | Cover, Protective Tube | 1 |
F Axles, Wheels & Transmissions
F1-4-1 Drive Head Assembly,, Front Axle
| 22***07 | Circlip | 1 |
| 45***22 | G.A., Location Drawing, Sd90 Disc Brake Axle | 1 |
| 45***02 | Plate, End | 1 |
F1-3-1 D/Shafts & Trackrod,, Front Axle
| 45***50 | Rod, Track | 1 |
| 91***50 | Shaft, Hub Side | 2 |
| 91***51 | Shaft, Differential Side | 1 |
F1-4-2 Drive Head Assembly,, Front Axle Non Abs
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
| 45***03 | Nut, Adjusting | 1 |
F1-2-6 Wheel Hub Assembly,, Front Right Hand Abs, > 01-06-2008
| 10***46 | Seal, Oil | 1 |
| 10***49 | Bracket, Sensor Support | 1 |
| 10***54 | Cover | 1 |
F1-5-1 Differential,, Assembly Front
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F1-2-2 Wheel Hub Assembly,, Front Right Hand Abs, < 01-06-2008
| 10***46 | Seal, Oil | 1 |
| 10***49 | Bracket, Sensor Support | 1 |
| 10***54 | Cover | 2 |
F1-1-2 Axle Assembly,, Front Sd90 Non Abs, Non Tacho
| 13***11 | Screw, Cap M12 X 45 | 8 |
| 13***10 | Screw, Cap M16 X 40 | 4 |
| 13***20 | Screw, Cap M16 X 100 | 4 |
F1-6-1 Kits,, Drivehead,Axle Front
| 92***00 | Kit-Shim | 1 |
| 92***01 | Shim, 0.15 | 1 |
| 92***02 | Shim, 0.20 | 1 |
F1-1-1 Axle Assembly,, Front Sd90 Abs
| 13***11 | Screw, Cap M12 X 45 | 8 |
| 13***10 | Screw, Cap M16 X 40 | 4 |
| 13***20 | Screw, Cap M16 X 100 | 4 |
F1-2-1 Wheel Hub Assembly,, Front Left Hand Abs, < 01-06-2008
| 10***46 | Seal, Oil | 1 |
| 10***49 | Bracket, Sensor Support | 1 |
| 10***54 | Cover | 2 |
F1-5-2 Differential,Front, Assembly Non Abs
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F1-5-3 Differential,Front, Assembly Non Abs
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 41***00 | Sealant | 1 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
F1-2-4 Wheel Hub Assembly,, Front Rh Non Abs
| 10***46 | Seal, Oil | 1 |
| 10***54 | Cover | 1 |
| 10***55 | Pin | 2 |
F1-7-1 Kit, Assembly
| 10***54 | Cover | 2 |
| 10***55 | Pin | 2 |
| 10***63 | Stud | 6 |
F1-2-3 Wheel Hub Assembly,, Front Lh Non Abs
| 10***46 | Seal, Oil | 1 |
| 10***54 | Cover | 1 |
| 10***55 | Pin | 2 |
F1-2-5 Wheel Hub Assembly,, Front Left Hand Abs, > 01-06-2008
| 10***46 | Seal, Oil | 1 |
| 10***49 | Bracket, Sensor Support | 1 |
| 10***54 | Cover | 1 |
F2-1-1 Axle Assembly,, Rear Sd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***23 | Bolt, M20 X 130 Long | 8 |
| 13***1Z | Bolt, M20x220 | 36 |
F2-5-1 Kits,, Drivehead,Axle Rear
| 82***20 | Spacer, 3.750 | 1 |
| 82***21 | Spacer, 3.775 | 1 |
| 82***22 | Spacer, 3.800 | 1 |
F2-2-1 Axle Arm & Hub Assy,, Rear Axle
| 13***6Z | Bolt, M20 X 70 | 6 |
| 13***3Z | Screw, Cap M8x16 G12.9 | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-6-1 Kit, Spacer, Hub Assy & Axle Arm
| 82***71 | Spacer, 1.150 | 1 |
| 82***72 | Spacer, 1.175 | 1 |
| 82***73 | Spacer, 1.200 | 1 |
F2-3-1 Drive Head Assembly,, Rear Axle
| 10***22 | Washer | 1 |
| 10***21 | Piston | 1 |
| 10***22 | Nut | 1 |
F3-1-1 Wheels & Tyres Trell, 540/65r34 710/70r38, Trelleborg
| 15***01 | Valve | 1 |
| 33***82 | Wheel, Assembly Rear Left Hand, Trelleborg | 1 |
| 33***94 | Wheel, Assembly Rear Right Hand, Trelleborg | 1 |
F3-2-2 Wheels & Tyres Mic'N, 600/70r30 650/85r38, Michelin
| 15***01 | Valve | 1 |
| 33***64 | Tyre, If600/70r30 Xiobib T, Michelin | 1 |
| 33***67 | Tyre, If650/85r38 Xiobib T, Michelin | 1 |
F3-3-1 Wheels & Tyres G'Yr, 540/75r28 650/75r38, Good Year
| 15***01 | Valve | 1 |
| 33***05 | Wheel, Rim Dw20a X 38 | 1 |
| 33***23 | Tyre, Optitrac 65***38 T, Good Year | 1 |
F3-2-1 Wheels & Tyres Mic'N, 600/60r30 710/60r42, Michelin
| 15***01 | Valve | 1 |
| 33***58 | Tyre, Vf600/60r30, Michelin | 1 |
| 33***61 | Tyre, Vf710/60r42, Michelin | 1 |
F3-1-2 Wheels & Tyres Trell, 600/70r30 710/70r42, Trelleborg
| 15***01 | Valve | 1 |
| 33***84 | Wheel, Assembly Rear Left Hand, Trelleborg | 1 |
| 33***96 | Wheel, Assembly Rear Right Hand | 1 |
F3-3-2 Wheels & Tyres G'Yr, 600/70r30 650/85r38, Good Year
| 15***01 | Valve | 1 |
| 33***53 | Wheel, Rim Dw20a X 30 | 1 |
| 33***21 | Tyre, Optitrac 65***38 T, Good Year | 1 |
F4-21-1 Propshaft, Power Take Off,Front, V-Tronic Transmission
F4-1-1 Propshafts, Axle Drive, Front, V-Tronic Transmission
| 13***0D | Bolt | 4 |
| 13***3D | Nut, M10 Grade 10.9 | 4 |
| 33***79 | Propshaft, Front | 1 |
F4-31-1 Propshaft, Power Take Off,Rear, V-Tronic Transmission
| 13***0D | Bolt | 4 |
| 13***3D | Nut, M10 Grade 10.9 | 4 |
| 33***25 | G.A, P140 V-Tronic G/Box, Common Parts | 1 |
F4-2-1 Propshafts, Axle Drive, Front, 6 X 4 Transmission
| 13***0D | Bolt | 4 |
| 13***3D | Nut, M10 Grade 10.9 | 4 |
| 33***22 | Propshaft, Front | 1 |
F4-32-1 Propshaft, Power Take Off,Rear, 6 X 4 Transmission
| 13***0D | Bolt | 4 |
| 13***3D | Nut, M10 Grade 10.9 | 4 |
| 33***75 | Shaft, Rear Power Take-Off Drive | 1 |
F4-22-1 Propshaft, Power Take Off,Front, 6 X 4 Transmission
| 11***25 | Strap | 2 |
| 33***76 | Propshaft, Power Take-Off, Front | 1 |
| 33***16 | Propshaft, Power Take-Off Front | 1 |
F4-11-1 Propshafts, Axle Drive, Rear, V-Tronic Transmission
| 33***25 | G.A, P140 V-Tronic G/Box, Common Parts | 1 |
| 33***33 | Shaft, Axle Drive | 1 |
| 33***73 | G.A, Driveshaft V-Tronic | 1 |
F4-12-1 Propshafts, Axle Drive, Rear, 6 X 4 Transmission
| 33***74 | Shaft, Rear Drive | 1 |
| 33***26 | G.A, P140 6 X 4 G/Box, Common Parts | 1 |
| 33***76 | G.A, Driveshaft P-Tronic | 1 |
F6-14-1 Layshaft, Clutch (C)
| 13***10 | Capscrew | 2 |
| 33***16 | Plate, Counter, Clutch | 7 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 1 |
F6-81-2 Gearbox Breather
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 16***53 | Adapter | 1 |
| 22***03 | Clip, Jubilee | 2 |
F6-12-1 Layshaft, Clutch (B)
| 13***09 | Capscrew, M6 X 35 | 2 |
| 33***11 | Clutch, Plate, Friction | 7 |
| 33***12 | Clutch, Plate, Counter | 7 |
F6-35-1 Position Sensor, Rangebox
| 13***0Z | Bolt, M4 X 40mm | 2 |
| 45***04 | Sensor, Positional | 1 |
| 45***07 | Housing, Sensor | 1 |
F6-31-20 Gearbox, Rangebox External Parts
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Bolt, M8 X 35mm | 4 |
F6-7-1 Output Shaft, Pto
| 45***89 | Shaft, Output Power Take-Off | 1 |
| 45***06 | Gear, Power Take-Off 45t | 1 |
| 45***16 | Sleeve, Sliding Power Take-Off | 1 |
F6-6-13 Gear/Shaft, Intermediate, 6 X 4 Powershift Eco Rear Pto (750)
| 45***14 | Shaft, Intermediate Gear | 1 |
| 45***89 | Gear, Intermediate | 1 |
| 90***37 | Bearing, 55 X 90 X 23 | 1 |
F6-3-1 Valve Block
| 13***9Z | Bolt, M8 X 35mm | 4 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 18 |
| 13***1Z | Capscrew | 24 |
F6-31-2 Rangebox Assembly, External Parts
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Bolt, M8 X 35mm | 4 |
F6-18-1 Clutch Housing
| 13***3Z | Bolt, M10 X 55 | 5 |
| 13***21 | Bolt | 12 |
| 13***8Z | Capscrew, M5 X 30mm | 4 |
F6-36-10 Piston, Shift, Cylinder 459/10310
| 13***0Z | Bolt, M10 X 40 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 45***10 | Cylinder, Shift | 1 |
F6-34-1 4wd Clutch, Rangebox
| 22***23 | Circlip | 1 |
| 33***20 | Plate, Friction, Clutch | 12 |
| 44***06 | Plate, Counter | 13 |
F6-2-2 Gearbox, 6 X 4 Powershift, Casings And External Parts
| 41***00 | Sealant | 1 |
F6-0-1 Transmission, Assembly, And Transfer Gear Arrangement
| 13***1Z | Setscrew, M6 X 12mm Long | 7 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Setscrew, M16 X 16, Metric Coarse | 2 |
F6-31-1 Rangebox Assembly, Internal Parts
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 14***09 | Seal; Supplied With Item 1. Remove To Fit Item 18, Seal | 8 |
| 33***04 | Joint, Banjo | 4 |
F6-0-5 Gearbox, Powershift, Rear Pto Only Eco
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
F6-31-10 Gearbox, Rangebox, Internal Parts
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 14***08 | Seal, Washer | 8 |
| 33***04 | Joint, Banjo | 4 |
F6-10-1 Input Clutch
| 13***10 | Screw, M8 X 40 | 12 |
| 33***11 | Clutch, Plate, Friction | 7 |
| 33***12 | Clutch, Plate, Counter | 7 |
F6-19-1 Front Casing
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 45***07 | Accumulator | 1 |
| 45***02 | Casing, Front | 1 |
F6-13-1 Output Clutch "E"
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 2 |
| 33***16 | Plate, Counter, Clutch | 7 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 1 |
F6-1-2 Gearbox, Smoothshift Eco, Front And Rear Pto (540)Rpm Only
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Setscrew, M16 X 16, Metric Coarse | 2 |
F6-0-3 Gearbox, Powershift, F&R Pto Eco
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
F6-33-1 Output Shaft, Rangebox
| 13***17 | Screw, Cap M12, Microencapsulated | 10 |
| 45***82 | Synchroniser | 1 |
| 45***96 | Shaft, Output | 1 |
F6-17-1 Idler Shaft, Pto
| 45***02 | Gear, Idler 37t | 1 |
| 45***10 | Shaft, Idler | 1 |
| 90***96 | Bearing, Taper | 2 |
F6-0-4 Gearbox, Powershift, Rear Pto Only
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
F6-91-4 Tools
| 99***33 | Tool, 4wd Seal Dolly | 1 |
| 99***36 | Tool, Locking Plate, Range Box Output | 1 |
F6-20-1 Casing, Rear & Intermediate
| 13***0Z | Bolt, M10 X 40 | 18 |
| 13***3Z | Bolt, M10 X 55 | 5 |
| 13***8Z | Bolt, M10x80 | 2 |
F6-1-4 Gearbox, Smoothshift Eco, Front & Rear Pto (750) Rpm Only
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
F6-1-1 Gearbox Rear 540 Pto, Smoothshift Eco, And Transfer Gear Assembly
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
F6-2-1 Gearbox, 6 X 4 Powershift, Internal Components
| 44***10 | Screw | 1 |
| 45***73 | Gearbox, G.A. Powershift, Wet Master Clutch | 2 |
| 45***74 | Clutch, Drum, & Plate Carrier | 1 |
F6-34-10 Clutch, Paxk 459/10275
| 22***23 | Circlip | 1 |
| 33***20 | Plate, Friction, Clutch | 12 |
| 44***06 | Plate, Counter | 13 |
F6-9-1 Oil Pump, 6 X 4 Powershift
| 13***3Z | Bolt, M10 X 55 | 5 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 20***78 | Pump, Oil | 1 |
F6-2-11 Smoothshift Eco, Powershift, 540 Pto Speed Only
| 44***10 | Screw | 1 |
| 45***73 | Gearbox, G.A. Powershift, Wet Master Clutch | 1 |
| 45***91 | Fork, Selector, Power Take-Off | 1 |
F6-15-1 Layshaft, Clutch (D)
| 13***10 | Capscrew | 2 |
| 33***16 | Plate, Counter, Clutch | 7 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 1 |
F6-6-1 Intermediate Shaft, Gear
| 45***90 | Shaft, Intermediate | 1 |
| 45***59 | Gear, Intermediate | 1 |
| 90***37 | Bearing, 55 X 90 X 23 | 1 |
F6-4-1 Clutch Drum, And Carrier
| 13***16 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 22***60 | Circlip | 1 |
F6-61-2 Dipstick & Filler, Transmission
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***7D | Setscrew, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 1 |
F6-36-1 Shift Cylinder, Rangebox
| 13***0Z | Bolt, M10 X 40 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 45***10 | Cylinder, Shift | 1 |
F6-32-1 Main Shaft, Rangebox
| 45***82 | Synchroniser | 1 |
| 45***95 | Shaft, Main | 1 |
| 45***22 | Gear, 59t | 1 |
F6-8-1 Pump Drive Shaft
| 45***92 | Pump, Shaft | 1 |
| 45***38 | Shaft, Pump Drive | 1 |
| 82***81 | O Ring, 130mm I/D | 1 |
F6-21-1 Clutch Assembly, Power Take Off, Front
| 13***1Z | Screw | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
F6-32-10 Mainshaft Components, Rangebox
| 45***22 | Gear, 59t | 1 |
| 45***34 | Gear, 34t | 1 |
| 45***68 | Shaft, Main | 1 |
F6-81-1 Gearbox Breather
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 16***55 | Adaptor, 1/2" X 3/8" | 1 |
| 22***03 | Clip, Jubilee | 2 |
F6-7-13 Gear/Shaft, Output Shaft, 6 X 4 Powershift Eco Rear Pto (750)
| 45***13 | Shaft, Output Power Take-Off | 1 |
| 45***16 | Sleeve, Sliding Power Take-Off | 1 |
| 45***17 | Shaft, Output Power Take-Off | 1 |
F6-61-1 Dipstick & Filler, Transmission Oil
| 13***7D | Screw, M6 X 25mm | 3 |
| 13***3D | Nut, M6 Lock | 1 |
| 14***26 | Washer, Seal | 1 |
F6-91-2 Service Tools
| 89***91 | Tool, Pressure Test Clamp, 4wd Clutch Pack | 1 |
| 99***47 | Tool, Fitting, Setting Screw | 1 |
| 99***53 | Tool, Dolly, Idler Gear Bearing | 1 |
F6-2-13 Smoothshift Eco, Powershift, Rear Pto (750) Only
| 44***10 | Screw | 1 |
| 45***15 | Gearbox, 6 X 4 Powershift | 1 |
| 45***91 | Fork, Selector, Power Take-Off | 1 |
F6-33-10 Output, Shaft Assembly, Rangebox
| 13***17 | Screw, Cap M12, Microencapsulated | 10 |
| 45***25 | Gear, 59t | 1 |
| 45***35 | Gear, 52t | 1 |
F6-22-1 Clutch Assembly, Power Take Off, Rear
| 13***1Z | Screw | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***82 | Circlip | 1 |
F6-91-3 Service Tools
| 99***88 | Tool, Push/Pull, Main Shaft Range Box | 1 |
| 99***29 | Tool, Reaction, Power Take-Off | 1 |
| 99***34 | Tool, Clutch Alignment, Powershift & Power Take-Off | 1 |
F6-71-1 Filter, Transmission Oil, 6 X 4 Gearbox
| 33***54 | Element, Trans/Oil Filter | 1 |
| 33***56 | Filter, Transmission Oil, Assembly | 1 |
| 33***46 | G.A, Trans Hyds 6x4 | 1 |
F6-16-1 Idler Shaft
| 45***93 | Shaft, Idler | 1 |
| 45***50 | Gear, Idler 30t | 1 |
| 45***19 | Kit-Spacer, 4wd Shaft Bearing | 1 |
F6-35-10 Sensor, Position, 459/M2694
| 13***0Z | Bolt, M4 X 40mm | 2 |
| 33***35 | Lever - Eccentric Fo | 1 |
| 45***07 | Housing, Sensor | 1 |
F6-1-3 Gearbox, Smoothshift Eco, Rear Pto (750)Rpm Only
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
F6-11-1 Layshaft, Clutch (A)
| 13***09 | Capscrew, M6 X 35 | 2 |
| 33***25 | Plate, Friction | 2 |
| 33***26 | Plate, Counter, Brake | 1 |
F6-0-2 Gearbox, Powershift, F&R Pto
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
F6-41-1 Coupling/Damper, Torsional, Transmission
| 13***4D | Bolt, M10 X 60 | 6 |
| 33***67 | G.A, Damper 6 X 4 Curve 3 | 1 |
| 33***38 | Coupling, Torsional Damper, 6 X 4 | 1 |
F6-51-1 Dipstick & Filler, Transmission Oil
| 12***02 | Plate, Compression | 2 |
| 13***1D | Bolt, M16 X 110 | 2 |
| 13***5D | Bolt, M16x150, Dacromet | 4 |
F6-91-1 Service Tools
| 99***02 | Tool, Reaction Input Shaft | 1 |
| 99***03 | Tool, Socket, Main Gear Nut | 1 |
| 99***04 | Tool, Reaction Plate, Assembly Wet Clutch | 1 |
F6-5-1 Input Gear Shaft
| 45***91 | Shaft, Input Gear | 1 |
| 45***09 | Gear, 23 T, Power Take-Off Idler | 1 |
| 90***20 | Bearing, Taper Roller | 2 |
F7-1-1 Gearbox, Power Take Off, Front, ( Single )
| 13***5D | Setscrew, M8x20 | 6 |
| 33***29 | Plate, Cover | 1 |
| 33***36 | Housing, Gear Shaft | 1 |
F8-4-1 Pto Blanking Plate, Front Hitch, & Weight Tray
| 13***0D | Bolt, M16 X 40, Grade 8.8 | 3 |
| 13***3D | Nut, M16 | 3 |
| 14***1D | Washer, M16 | 6 |
F8-1-1 Guard, Rear Pto, Cat 2
| 13***7D | Bolt, M16x75 | 2 |
| 13***3D | Nut, M16 | 2 |
| 14***1D | Washer, M16 | 6 |
F8-1-12 Guard, Rear Pto, Cat 3
| 13***2D | Bolt, M12 X 50mm Long | 2 |
| 13***3D | Nut, M12 | 2 |
| 14***9D | Washer, M12 | 6 |
F8-1-11 Guard, Rear Pto, Cat 2
| 13***4D | Bolt, M12 X 60mm Long | 2 |
| 13***3D | Nut, M12 | 2 |
| 14***9D | Washer, M12 | 6 |
F8-2-1 Guard, Single Pto
| 13***3D | Bolt | 3 |
| 13***3D | Nut, M16 | 3 |
| 14***1D | Washer, M16 | 3 |
F8-1-2 Guard, Rear Pto, Cat 3
| 13***4D | Bolt, M16x60, Dacromet | 2 |
| 13***3D | Nut, M16 | 2 |
| 14***1D | Washer, M16 | 6 |
F8-1-0 Guard, Pto
| 13***7D | Bolt, M16x75 | 2 |
| 13***3D | Nut, M16 | 2 |
| 14***1D | Washer, M16 | 6 |
F8-3-1 Guard, Twin Pto
| 13***3D | Setscrew, M10 X16mm | 3 |
| 13***0D | Bolt, M10 X 40mm Long | 16 |
| 13***8D | Bolt | 4 |
G Brakes
G1-1-2 Brake Pipes, Chassis, Abs
| 13***9D | Setscrew, M8x35 | 1 |
| 13***1D | Nut, M8 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
G1-7-3 Trailer Circuit, Palm Couplings, Twin Line
| 33***40 | G.A, Palm Coupling Parts, To Complete | 1 |
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
G1-3-1 Brake Pipes, Rear Axle, Non-Abs
| 13***5D | Setscrew, M8x20 | 14 |
| 13***9D | Setscrew, M8x35 | 1 |
| 13***0D | Bolt, M16 X 100mm | 8 |
G1-5-2 Foot Brake Circuit
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***3D | Nut, Self Lock M8 | 3 |
| 14***7D | Washer, M8 Plain | 3 |
G1-4-1 Air Charge Circuit
| 13***1D | Screw, Set M6x12 | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
| 13***5D | Setscrew, M8x20 | 4 |
G1-2-1 Brake Pipes, Front Axle, Abs & Non-Abs
| 12***56 | Spacer, Steel | 1 |
| 13***9D | Setscrew, M8x35 | 1 |
| 13***3D | Setscrew, M10 X16mm | 3 |
G1-7-2 Trailer Braking, Control Line Filter, Circuit
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
G1-32-2 Trailer Brakes, Hydraulic, Single Line (Safim)
| 13***6D | Bolt, M8x70 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
G1-5-1 Foot Brake, Supply Circuit
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
G1-13-1 Actuator, Air & Hydraulic
| 13***8D | Setscrew, M10 X 30 | 2 |
| 14***8D | Washer, M10 | 2 |
| 15***01 | Chamber, Brake | 1 |
G1-7-1 Trailer Braking, Circuit
| 13***5D | Setscrew, M8x20 | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 10 |
G1-7-5 Trailer Circuit, Duomatic Coupling
| 13***8D | Setscrew, M10 X 30 | 1 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 2 |
G1-7-4 Trailer Circuit, 'C'Couplings, Twin Line
| 33***43 | Cover, 'C' Coupling | 1 |
| 33***56 | G.A, C Coupling Parts To, Complete | 1 |
| 45***36 | Coupling, 'C'Male, Yellow | 1 |
G1-1-1 Brake Pipes, Chassis, Non-Abs
| 13***9D | Setscrew, High Strength | 1 |
| 13***1D | Nut, M8 | 1 |
| 14***7D | Washer, M8 Plain | 1 |
G1-8-1 Handbrake Circuit
| 13***3D | Setscrew | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-15-1 Brake, Actuator, Parking, 6 X 4 Gearbox
| 33***26 | G.A, P140 6 X 4 G/Box, Common Parts | 1 |
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
G1-2-12 Brake Caliper, Front 75mm
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***8D | Bolt, M20 X 80mm | 4 |
| 15***65 | Caliper, Brake Assembly, 75mm | 4 |
G1-30-1 Trailer Brakes, Hydraulic
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-3-2 Brake Pipes, Rear Axle, Abs
| 13***5D | Setscrew, M8x20 | 14 |
| 13***0D | Bolt, M16 X 100mm | 8 |
| 13***3D | Nut, M16 Self Locking | 8 |
G1-3-11 Brake Caliper, Rear 60mm
| 13***8D | Bolt, M16 X 80mm | 8 |
| 13***0D | Bolt, M16 X 100mm | 8 |
| 13***1D | Nut, M16 | 8 |
G1-32-1 Trailer Brakes, Hydraulic, Single Line (Safim)
| 13***6D | Bolt, M8x70 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
G1-6-1 Foot Brake, Actuator Circuit, Non-Abs
| 13***4D | Screw | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***7Z | Bolt | 4 |
G1-15-11 Brake, Actuator, Parking, Cvt Gearbox
| 15***87 | Brake, Parking Assembly | 1 |
| 15***41 | Washer | 1 |
| 15***42 | Boot | 1 |
G1-2-11 Brake Caliper, Front 60mm
| 13***1D | Bolt, M16 X 45mm | 4 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 15***66 | Caliper, Brake Assembly, 60mm | 4 |
G1-6-2 Foot Brake, Actuator Circuit, Abs
| 13***7D | Setscrew, M12 X 25 | 12 |
| 13***0D | Bolt, M8 X 200 Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-31-1 Valve, Trailer Brake, Hydraulic
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 1 |
G1-7-6 Trailer Circuit, Twin Coupling Head
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 3 |
| 13***3D | Nut, Self Lock M10 | 5 |
G1-9-1 Brakes, Trailer Air, Single Line, Optional
| 13***3D | Bolt, M6 X 25 | 2 |
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
G1-16-1 Valve, Trailer Control
| 15***38 | Valve, Trailer Control | 1 |
| 15***55 | Kit-Repair, Major | 1 |
| 15***56 | Kit-Repair, Minor | 1 |
S Suspension
S1-1-1 Anti-Roll Bar, Installation
| 13***9D | Bolt | 4 |
| 13***2D | Bolt | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
S1-3-1 Self Levelling, Installation
| 13***1D | Screw, Set M6x12 | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***8D | Bolt, M6 X 30 | 2 |
S1-2-1 Suspension Arms, Installation
| 13***2D | Setscrew | 8 |
| 13***0D | Bolt, M12 X 40 | 4 |
| 13***9D | Bolt, M20 X190mm | 2 |
S1-4-1 Suspension Cylinders, Installation
| 22***35 | Circlip | 8 |
| 33***05 | G.A, Suspension Cylinder, 45mm Cushioned P140 | 1 |
| 47***37 | Pin | 4 |
S1-5-1 Tools, Calibration
| 33***59 | Tool, Suspension Calibration, Front Left, Rear Right | 1 |
| 33***62 | Tool, Suspension Calibration, Front Right, Rear Left | 1 |
S2-3-1 Self Levelling, Installation
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***7D | Setscrew, M8x25 | 7 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
S2-4-1 Suspension Cylinders, Installation
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***3D | Nut, Lock M24 | 2 |
S2-5-1 Control Rod, Assembly
| 12***01 | Joint, Ball End, M8 Left Hand Thread | 1 |
| 12***02 | Joint, Ball, M8 Right Hand | 1 |
| 13***2D | Nut, Thin | 1 |
S2-2-1 Suspension Arms, Installation
| 13***0D | Bolt, M12 X 40 | 4 |
| 13***1D | Bolt, M20x110 | 2 |
| 13***3D | Bolt | 4 |
S2-1-1 Anti-Roll Bar, Installation
| 13***0D | Setscrew, M16 X 40mm | 4 |
| 13***8D | Bolt, M8 X 80mm | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
S2-1-2 Anti-Roll Bar, Installation
| 13***0D | Setscrew, M16 X 40mm | 4 |
| 14***1D | Washer, M16 | 4 |
| 33***34 | Bar, Rear Anti-Roll | 1 |
S2-6-1 Sensor
| 33***06 | Arm, Potentiometer | 1 |
| 33***94 | Sensor, Angle, 45 Degree | 1 |
| 33***24 | Sensor, Angled | 1 |
S2-3-2 Self Levelling, Installation
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***5D | Setscrew, M4x20 | 4 |
S2-3-3 Self Levelling, Installation
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***5D | Setscrew, M4x20 | 4 |
U Engine Qsb6.7 Tier 3
U1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 2 |
| 13***1D | Bolt, M16 X 110 | 2 |
| 13***3D | Nut, M16 | 2 |
U1-1-3 Engine, Complete, 230bhp
| 33***43 | Engine, Complete Qsb6.7, Turbocharged, 230bhp | 1 |
| 48***49 | G.A, Engine 7230 | 1 |
U1-7-3 Damper
| 02***36 | Pulley, Crankshaft | 1 |
| 02***51 | Damper, Vibration | 1 |
| 13***4Z | Bolt | 6 |
U1-5-1 Front End Drive
| 02***32 | Bearing | 1 |
| 02***33 | Circlip | 1 |
| 02***35 | Hub, Fan | 1 |
U1-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***71 | Plug | 1 |
U1-7-2 Flywheel Damper
| 13***4Z | Bolt | 6 |
| 33***33 | Coupling, Torsional Damper, 6 X 4 | 1 |
| 48***22 | G.A, Voith Damper Assembl, P137 | 1 |
U1-5-11 Cooling Fan & Spacer
| 01***55 | Adapter, Fan Drive | 1 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 13***7D | Capscrew, M10 | 4 |
U1-6-2 Rear Housing, Camshaft & Gear
| 02***39 | Dowel, Pin | 2 |
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
| 02***65 | Screw, M12 X 30 | 1 |
U1-3-2 Block Assembly
| 02***07 | Plug, Expansion, D=26mm | 1 |
| 02***08 | Plug, Expansion, 17.73mm | 2 |
| 02***09 | Thimble | 14 |
U1-5-3 Front End Drive
| 02***32 | Bearing | 1 |
| 02***33 | Circlip | 1 |
| 02***35 | Hub, Fan | 1 |
U1-1-4 Engine, Complete, 270hp
| 33***14 | 270 Hp Engine Ga | 1 |
U1-6-3 Timing Case, Auxiliary Drive
| 02***85 | Gasket | 1 |
| 02***88 | Bearing, Roller | 1 |
| 02***90 | Gear, Accessory Drive | 1 |
U1-4-1 Crankshaft, Bearings Pistons, Con-Rods
| 02***43 | Circlip | 12 |
| 02***09 | Kit-Wear Sleeve, Front | 1 |
| 02***59 | Kit-Wear Sleeve, Rear | 1 |
U1-1-1 Engine, Complete, 170bhp
| 33***19 | Engine, Complete, Turbocharged, 173bhp | 1 |
| 48***51 | G.A, Engine 7170 | 1 |
U1-3-1 Block Assembly
| 02***07 | Plug, Expansion, D=26mm | 1 |
| 02***08 | Plug, Expansion, 17.73mm | 2 |
| 02***09 | Thimble | 14 |
U1-6-1 Gear Cover, Front
| 02***62 | Screw | 6 |
| 02***74 | Screw, M8 X 45 | 7 |
| 02***81 | Dowel, Ring | 2 |
U1-1-2 Engine, Complete, 200bhp
| 33***17 | Engine, Complete, Turbocharged, 200bhp | 1 |
| 48***47 | G.A, Engine 7200 | 1 |
U1-5-2 Cooling Fan, And Spacer
| 01***55 | Adapter, Fan Drive | 1 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 13***5D | Capscrew, M10 X 20 | 4 |
U2-4-1 Lifting Plates, Engine
| 02***05 | Bolt | 2 |
| 02***87 | Screw | 2 |
| 02***12 | Bracket, Lifting | 1 |
U2-5-1 Crankcase Breather
| 02***26 | Hose, Plain | 1 |
| 02***55 | O Ring | 1 |
| 02***15 | Seal, O Ring | 2 |
U2-3-1 Rocker Cover
| 02***46 | Nut | 6 |
| 02***47 | Cap, Filler | 1 |
| 02***48 | Gasket, Filler Cap | 1 |
U2-1-1 Cylinder Head
| 02***07 | Plug, Expansion, D=26mm | 13 |
| 02***15 | Plug, Pipe, 1/2"Npt | 4 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***81 | Valve, Overflow | 12 |
| 02***21 | Nut, 3/8"-24unf, Heavy Hexagon | 2 |
| 02***22 | O Ring | 4 |
U3-4-3 Exhaust System, With Aspirator
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
U3-1-3 Air , Transfer
| 02***04 | Nut, Lock | 1 |
| 02***08 | Pipe, Air Transfer | 1 |
| 02***09 | O Ring | 1 |
U3-1-1 Manifold, Induction, And Induction Heater
| 02***10 | Screw, Flange Head, M8 X 50mm | 1 |
| 02***98 | Screw | 1 |
| 02***23 | Bolt | 2 |
U3-4-2 Exhaust System, With Aspirator
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
U3-3-11 Air Induction Hoses
| 13***8D | Bolt, M6 X 30 | 8 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***3D | Nut, M6 Lock | 8 |
U3-2-1 Manifold, Exhaust
| 02***85 | Screw | 3 |
| 02***83 | Screw, Flange Head Cap | 12 |
| 02***83 | Spacer, Fan Pilot | 12 |
U3-3-1 Air Filter
| 32***52 | Element, Main, Air Filter | 1 |
| 32***53 | Element, Safety, Air Filter | 1 |
| 32***82 | Cover, Access | 1 |
U3-1-2 Exhaust
| 02***13 | Plug | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 02***04 | Nut, Lock | 1 |
U3-4-1 Exhaust System
| 13***1D | Setscrew, M8 X 12mm | 6 |
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Setscrew, M10 X 35mm Long | 3 |
U4-5-1 Radiator & Hoses
| 13***5D | Setscrew, M8x20 | 1 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
U4-2-1 Thermostat Housing, Outlet Connector
| 02***13 | Screw | 3 |
| 02***37 | Connector, Water Outlet | 1 |
| 02***64 | Seal, Thermostat | 1 |
U4-1-1 Pump, Water
| 02***86 | Seal, Rectangular Ring | 1 |
| 02***29 | Screw, Hex Flange Head | 2 |
| 02***73 | Pump, Kit-Water | 1 |
U4-2-2 Connector, Water Inlet
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***98 | Seal, Rectangular Ring | 1 |
| 02***31 | Screw, Flange Head Cap, M10 X 1.50 X 70 | 3 |
U4-3-12 Cooler, Hydraulic Oil
| 13***1D | Nut, M8 | 2 |
| 14***3D | Washer | 2 |
| 33***86 | Cooler, Hydraulic Oil | 2 |
U4-3-11 Radiator Assembly
| 13***3D | Setscrew, M8 X 16mm | 12 |
| 14***7D | Washer, M8 Plain | 12 |
| 33***80 | Plate, Radiator Mounting, Left Hand Upper | 1 |
U4-3-13 Cooler, Transmission Oil
| 13***1D | Setscrew, M5 X 12mm Long | 4 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 14***3D | Washer | 4 |
U4-4-1 Radiator Fittings, & Mountings
| 13***3D | Setscrew | 8 |
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***7D | Screw, M6 X 25mm | 1 |
U4-7-1 Charge Air Cooler, Hose & Pipwork
| 33***68 | Pipe, Charge Air Cooler, Cold, Left Hand | 1 |
| 33***72 | Pipe, Charge Air Cooler, Hot, Right Hand | 1 |
| 33***77 | I.A, Installation Cac Pip | 1 |
U4-3-1 Combination Cooler, Assembly
| 13***3D | Setscrew, M8 X 16mm | 7 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 9 |
U4-6-1 Coolant Filler, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***3D | Setscrew | 1 |
| 13***5D | Setscrew, M10 X 20 | 1 |
U5-3-1 Oil Pump
| 02***32 | Screw | 4 |
| 02***11 | Pump, Oil | 1 |
U5-2-1 Oil Level Dipstick, & Tube
| 13***5D | Screw, Set | 1 |
| 14***6D | Washer, M6 Plain | 1 |
| 24***09 | Grommet | 1 |
U5-1-1 Sump, Oil
| 02***95 | Plug | 2 |
| 02***74 | Screw, M8 X 45 | 18 |
| 02***22 | Screw, Flange Head, M10 X 25 | 1 |
U5-4-1 Filter, Oil & Cooler
| 02***16 | Plug, Pipe | 1 |
| 02***33 | Spring, Oil Relief Valve | 1 |
| 02***32 | Valve, Oil Pressure Relief | 1 |
U5-5-1 Engine Oil Filler, Installation
| 02***98 | O Ring | 1 |
| 02***43 | Cap, Oil Filler | 1 |
| 13***5D | Setscrew, M10 X 20 | 2 |
U6-2-1 Fuel Manifold, & Injection Pipes
| 02***80 | Screw, M8 X 50 | 4 |
| 02***36 | Retainer, Fuel Pipe Connector | 6 |
| 02***34 | Valve, Pressure Relief | 1 |
U6-4-1 Fuel Pipes, Fuel Tank To Filter
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***4D | Screw | 6 |
U6-3-1 Fuel Filter Pipework
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
U6-1-1 Pump, Fuel Injection
| 02***17 | Nut | 3 |
| 02***81 | Nut | 1 |
| 02***82 | Washer, Spring | 1 |
U6-7-1 Filter, Fuel
| 02***96 | Plug | 2 |
| 02***27 | Bolt, M8x35 | 4 |
| 02***41 | O Ring | 1 |
U6-6-1 Filter, Fuel Sediment
| 02***05 | Plug | 1 |
| 32***63 | Element, Fuel Water/Sediment, Filter Cartridge | 1 |
| 32***20 | Filter, Fuel Assembly, M12 Ports | 1 |
U6-4-2 Fuel Pipes, Filter To Fuel Pump
| 02***43 | Hose, Fuel Feed | 1 |
| 02***44 | Hose, Fuel Feed | 1 |
U6-6-2 Filter, Fuel Sedimenter
| 02***05 | Plug | 1 |
| 32***63 | Element, Fuel Water/Sediment, Filter Cartridge | 1 |
| 33***52 | G.A, Fuel Supply | 0 |
U6-4-3 Fuel System, Fuel Tank To Filter
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***4D | Screw | 6 |
U6-5-1 Injectors, Fuel
| 02***08 | Screw | 12 |
| 02***31 | Connector | 6 |
| 02***32 | O Ring | 1 |
U7-3-1 Air Compressor, Installation
| 02***75 | O Ring | 2 |
| 02***46 | Cover, Air Compressor | 1 |
| 02***49 | O Ring | 1 |
U7-2-1 Pipework, Turbocharger
| 02***99 | O Ring | 1 |
| 02***02 | Screw, M8 X 20mm | 2 |
| 02***46 | O Ring | 1 |
U7-1-2 Turbocharger
| 02***36 | Nut | 4 |
| 02***78 | Stud | 4 |
| 02***46 | O Ring | 1 |
U7-1-1 Turbocharger
| 02***36 | Nut | 4 |
| 02***78 | Stud | 4 |
| 02***46 | O Ring | 1 |
U7-4-2 Pipework, Compressor
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***54 | Spacer | 1 |
| 02***05 | Bolt | 1 |
U7-5-1 Air Compressor, & Installation, Air-Con
| 13***1D | Bolt, M8 X 110mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***31 | G.A, Air Con Installation | 1 |
U8-2-1 Gasket Sets, Bottom
| 02***44 | Kit-Bottom Gasket | 1 |
U8-1-1 Gasket Sets, Top
| 02***43 | Kit-Top Gasket | 1 |
FASTRAC 7230-PT(.) serial number reference
Locate the riveted data plate inside the cab on the right-hand cab pillar or dash console, and the stamped serial on the chassis frame near the loader-arm tower. Verify the serial against the machine identification plate.
| Prefix | Identifies | Notes |
|---|---|---|
| 01350005-01359999 | FASTRAC 7230 Service Repair Manual applicability |
Frequently asked questions
What engine does the JCB Fastrac 7230 use?
The JCB Fastrac 7230 uses a Cummins QSB 6.7L six-cylinder turbocharged intercooled diesel engine.
What is the operating weight of the JCB Fastrac 7230?
The operating weight is approximately 9,185 kg (20,249 lb) for 4WD configurations, varying slightly by ballast and tire setup.
What model replaced the JCB Fastrac 7230?
The JCB Fastrac 4000 Series, such as the 4220, succeeded the 7000 Series, introducing CVT transmissions and updated emissions compliance.
What FASTRAC 7230-PT(.) owners discuss
What engine powers the JCB Fastrac 7230 and what are its key specifications?
The JCB Fastrac 7230 uses a 6.7-liter, 6-cylinder Cummins QSB 6.7 engine. It produces 220 HP at 2200 RPM and 949 Nm of torque at 1500 RPM. The engine features a turbocharger and intercooler (6TI configuration). Displacement is 6702 cm³ with a piston bore and stroke of 107 mm x 124 mm. The tractor has a 430-liter fuel tank capacity.
How does the transmission system behave, and what are the common failure points?
The 7230 utilizes a P-Tronic semi-power shift transmission with 24 forward and 9 reverse speeds. Community reports indicate the transmission is prone to gear selection failures and persistent error codes. Some owners report transmission issues occurring as early as 5,000 to 6,000 hours. The gearbox is considered less robust than later models or the 8000 series, with gear changes described as difficult. Have your dealer verify the transmission control unit (TCU) software calibration and transmission fluid condition.
What are the typical undercarriage and wear patterns for this machine?
The 7230 is a 4WD tractor with a turning radius of 13.8 meters. It uses the OEM part reference front tires and the OEM part reference rear tires. The total weight is 9,185 kg. Wear patterns include seized disc brake pad calipers which can lead to fires, and park brake issues. Steering joints, front axle components, and linkage pins require close inspection, especially on machines used for loader or heavy transport work. The independent axle suspension is noted for its ability to maintain traction.
What electrical and sensor issues are commonly reported?
Owners report frequent error codes and electrical dramas. PTO fault codes are common, often caused by sensor or wiring issues rather than mechanical failure. Check all PTO sensor connectors for corrosion or loose plugs. Low hydraulic oil levels can also trigger PTO faults. Rear cab lights and other electrical components may fail, requiring auto-electrician intervention. The ECU software may require calibration updates specific to the Fendt-derived transmission controller.
How does the hydraulic system perform under load?
Hydraulic response under load is a key area for evaluation. Older models may have poorer hydraulic performance compared to newer iterations. Hydraulic response should be checked carefully, especially if the tractor has spent years on mounted implements. Low hydraulic oil can trigger fault codes. The rear three-point hitch lift capacity is 9,000 kg (9,000 kg with TUV control). Ensure hydraulic oil is clean and at the correct level to prevent PTO faults.
What is the consensus on fuel consumption and ballasting?
Fuel efficiency is heavily dependent on ballast, tire pressure, and implement size. Wasted slip shows up directly at the fuel tank. The tractor is not considered low-consumption in absolute terms, but under a proper load, fuel use is in line with the work rate. Proper ballasting is critical for effective power transfer, especially for large drilling combinations or heavy cultivation. Traction and ballast make a bigger difference than chasing extra engine revs.
What should be checked when buying a used JCB Fastrac 7230?
Verify the transmission gear selection functionality and check for persistent error codes. Inspect steering joints, front axle, and linkage pins for wear. Check disc brake pad calipers for seizure and park brake operation. Verify PTO sensor connectors and hydraulic oil levels to rule out false fault codes. Ensure the transmission control unit software is correctly calibrated. Check the condition of the independent axle suspension. Have your dealer verify the transmission health and electrical system integrity.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 7230-PT(.). Related factory variants of the same model family:
FASTRAC 7230-PT(.)
Need a specific FASTRAC 7230-PT(.) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.