JCBagriculturalfastrac
Jcb FASTRAC 3220
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 3220 is a high-speed, four-wheel-drive agricultural tractor produced from 2004 to 2006. It belongs to the Fastrac 3000 series, which succeeded the Fastrac 2000 series and preceded the Fastrac 4000 series. The machine features a 6.7-litre AGCO Power engine producing 164 kW (220 hp). Operating weight ranges from 7.7 tonnes depending on configuration. Configurations include the standard 3220, the 3220 Plus with electronic draft control, the 3220-65 ST with a 65 km/h top speed, and the 3220-80 ST A with an 80 km/h top speed and front PTO.
Across the Fastrac 3000 series, the primary change was the introduction of the Plus variants featuring the JCB Selectronic system for air-assisted range changes and electronic draft control. The 3220 matters in the used and parts market because its AGCO Power engine is robust and widely supported, while the high-speed transmission components are complex and require specific dealer-level diagnostics. The machine's 6.7-litre engine and 6-speed synchromesh gearbox are common failure points for high-hour units, driving demand for specific seals, filters, and electronic control modules.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 3220 specifications
Engine
| Model | Cummins QSB4.4 |
| Displacement | 5.9 L (359.1 cu in) |
| Cylinders | 6 |
| Aspiration | Turbocharged and aircharge cooled |
| Net Power | 149.1 kW (200 hp) @ 2300 rpm |
| Gross Power | 164.1 kW (220 hp) |
| Torque Rise | 37 % |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 7970 kg (17,570.9 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Overall Length | 5200 mm (17.07 ft) |
| Overall Width | 2530 mm (8.31 ft) |
| Overall Height | Not documented for this exact serial range — verify with your dealer |
| Wheelbase | 3060 mm (10.04 ft) |
| Ground Clearance | 410 mm (16.15 in) |
| Tire Size | the OEM part reference |
Performance
| Max Travel Speed | 68.4 km/h (42.6 mph) |
| Transmission Type | 6-speed manual synchromesh gearbox |
| Forward Gears | 54 |
| Reverse Gears | 18 |
| 3-Point Hitch Lift Capacity @ 24 Inches | 7000 kg (15,432.4 lb) |
| 3-Point Hitch Type | Cat. III |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank Capacity | 350 L (92.5 gal) |
| Hydraulic System Fluid Capacity | 120 L (31.8 gal) |
| Engine Oil Capacity | Not documented for this exact serial range — verify with your dealer |
| Cooling System Capacity | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
FASTRAC 3220 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 12.1 L (3.2 US gal) | JCB Engine Oil (SAE 15W-40 or 10W-40 depending on climate; API CI-4 or higher) |
| Cooling system | 18.5 L (4.9 US gal) | JCB Coolant (Pre-mixed 50/50 ethylene glycol; silicate-free) |
| Fuel tank | 350 L (92.5 US gal) | Ultra-low sulfur diesel (ULSD) |
| Transmission (Gearbox Assembly) | 14.5 L (3.8 US gal) | JCB Transmission Fluid (JCB Multi-Vehicle Fluid or equivalent MTF) |
| Transmission (Speed Gearbox) | 1.5 L (0.4 US gal) | JCB Multi-Vehicle Fluid |
| Transmission (Range Box) | 1.5 L (0.4 US gal) | JCB Multi-Vehicle Fluid |
| Final drives (each) | 3.5 L (0.9 US gal) | JCB Final Drive Oil (SAE 80W-90 GL-5) |
| Hydraulic system AND tank | 120 L (31.8 US gal) | JCB Hydraulic Fluid (JCB Multi-Vehicle Fluid or ISO 46 hydraulic oil) |
| Axles/Differentials (Front) | 14.5 L (3.8 US gal) | JCB Multi-Vehicle Fluid |
| Axles/Differentials (Rear) | 14.5 L (3.8 US gal) | JCB Multi-Vehicle Fluid |
| Grease | N/A | JCB Lithium Complex Grease (NLGI Grade 2) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb FASTRAC 3220 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the FASTRAC 3220 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor hydraulic oil viscosity and particle count every 2000 hours to detect pump wear in the closed-loop system. Check coolant pH levels annually to prevent corrosion in the 6.7-litre engine block. Analyze engine oil for fuel dilution, which indicates injector or piston ring wear. Inspect transmission oil for metal shavings to identify gear or bearing failure in the speed gearbox. Track fuel filter differential pressure to predict clogging in the water separator.
Corrective & Common Repairs
Replace the wet master clutch if engagement slips under load. Repair hydraulic leaks at the draft control valve seals, a common failure on Plus models. Replace the air cleaner element if intake restriction exceeds limits. Fix brake caliper piston leaks by replacing seals. Address turbocharger hose clamp failures that cause boost loss. Replace the flywheel damper if engine vibration increases significantly.
Overhaul & Rebuild Points
Rebuild the front and rear axles every 10000 hours or when oil contamination exceeds limits. Overhaul the transmission gearbox if gear noise increases or synchronizer wear is detected. Rebuild the 6.7-litre engine if compression drops below specification or oil consumption exceeds 1 litre per 10 hours. Replace the hydraulic pump if flow rates fall below 80% of nominal. Rebuild the steering box if play exceeds 10 degrees.
Seasonal & Environment Servicing
Install cold starting aids if operating below -10°C. Check battery electrolyte level and charge state before winter. Inspect radiator fins for debris accumulation to prevent overheating in dusty conditions. Lubricate all grease points weekly in high-dust environments. Check air conditioning system performance before summer. Inspect tire pressure and tread wear for road transport between fields.
FASTRAC 3220 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/921001 | Element, Fuel Filter | Fuel system service | Check fitment → |
| 32/925644 | Filter, Fuel Assembly | Fuel system service | Check fitment → |
| 32/925330 | Filter, Fuel Sediment, 30 Micron | Fuel system service | Check fitment → |
| 830/11817 | Pipe, Fuel, Tank To Filter | Fuel system service | Check fitment → |
| 32/926132 | Filter, Carbon, Cab Aircon | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 3220 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0100 | Torque Reduction: AMF High Side Driver fault (Open Circuit or Short Circuit to Battery) | Fault in the Air Mass Flow (AMF) sensor high-side driver circuit or sensor itself. | Inspect AMF sensor wiring harness for damage or loose connections; check sensor power supply. |
| P0101 | MAF Sensor Fault | Malfunction in the Mass Air Flow sensor signal or circuit. | Check MAF sensor connector for corrosion; verify sensor operation with diagnostic tool. |
| P0102 | Torque Reduction: MAF Low Voltage Fault | MAF sensor signal voltage is below the calibrated minimum threshold. | Inspect MAF sensor ground and signal wires; replace sensor if circuit is intact. |
| P0103 | Torque Reduction: MAF High Voltage Fault | MAF sensor signal voltage is above the calibrated maximum threshold. | Inspect MAF sensor power supply and signal wires for short to battery; replace sensor if necessary. |
| P029B | Injector drift fault detection on Injector 2 | Injector 2 metering piston (MDP) trim exceeds maximum calibrated threshold. | Check Injector 2 wiring and connector; test injector solenoid resistance; replace injector if faulty. |
| P0321-87 | CAN bus message error for engine speed from engine ECU | Communication failure on the CAN bus regarding engine speed data. | Inspect J1939 diagnostic harness and data link adapter connections; check CAN bus termination resistors. |
| P0335 | Crankshaft Position Sensor 'A' Circuit (No Signal) | Loss of signal from the crankshaft position sensor. | Check crank sensor wiring and connector; verify sensor gap and operation. |
| P0336 | Torque Reduction: Crank Sensor Fault (Signal Fault) | Crankshaft position sensor signal is erratic or out of limits. | Inspect crank sensor for damage; check wiring for intermittent faults; replace sensor if needed. |
| P0340 | Torque Reduction: Cam signal last learnt value is outside of limits | Camshaft position sensor signal is out of expected range. | Inspect cam sensor wiring and connector; verify camshaft timing if mechanical issues are suspected. |
| D021 | Transmission sensor malfunction | Fault in transmission speed sensor or associated wiring. | Inspect transmission speed sensor and wiring for damage or loose connections. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
FASTRAC 3220 attachments & work tools
Three-Point Hitch Systems
The JCB FASTRAC 3220 utilizes a Category III three-point hitch with a lift capacity of 7000 kg (15432.4 lb) at the 24-inch load center. This configuration supports standard agricultural implements requiring high lift capacity relative to the machine's 7970 kg (17570.9 lb) operating weight.
Power Take-Off (PTO)
The tractor is equipped with both front and rear power take-off shafts, a standard feature for the 3220-65 ST, 3220-80 ST A, and 3220 Plus A variants manufactured between 2004 and 2006. The front PTO allows for the mounting of forward-facing implements such as mowers or balers.
Hydraulic System
The hydraulic system features a pump flow capacity of 104 l/min (27.5 gal/min) with a relief valve pressure of 21001.4 kPa (3046 psi). The system fluid capacity is listed as 120 l (31.8 gal), supporting multiple remote hydraulic outlets for powered work tools.
Cab and Climate Options
Factory configurations for the 3220 series include an enclosed cabin equipped with air conditioning and air brakes. Specific components such as the compressor, condenser, and evaporator are designated for serial numbers the OEM part reference through the OEM part reference, corresponding to the 2003–2006 production period.
Transmission and Speed
The machine uses a 6-speed manual synchromesh gearbox offering 54 forward and 18 reverse gears. Maximum road speed varies by configuration, with standard models rated at 40, 50, or 65 km/h (24.9, 31.1, 40.4 mph) and high-speed variants reaching 75 km/h (46.6 mph).
All FASTRAC 3220 assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 3220. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-21-1 Ladder Hitch, Assembly, Rockinger
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-23-1 Roller Drawbar, Heavy Duty, Australian & New Zealand Builds
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-2-1 Hitch Assembly, Front
| 13***7D | Setscrew, M12 X 25 | 4 |
| 13***8D | Bolt, M20 X 80mm | 10 |
| 13***9D | Bolt, M20 X 90, Dacromet | 4 |
A3-1-3 Weight, Linkage Mounted, 900kg/1500kg
| 13***2D | Bolt | 1 |
| 13***9D | Bolt, M20 X 90, Dacromet | 4 |
| 13***0D | Bolt, M20 X 100 | 2 |
A3-20-3 Swinging Drawbar, Without Piton, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
A3-22-3 Trailer Coupling, Ladder Hitch, 38mm, Rockinger 840ra
| 47***15 | Nipple, Grease - Drive In | 2 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-11-1 Hitch, Rear, Linkage, 80mm Lift Rams
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***0Z | Bolt, M20 X 100mm | 1 |
| 13***1Z | Bolt | 2 |
A3-18-1 Towing Hook
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***91 | Pin, Retaining | 1 |
A3-15-3 Stabiliser, Automatic
| 47***00 | Stabiliser, Automatic, Assembly | 1 |
| 47***83 | Housing, Recoil | 1 |
| 47***84 | Latch | 1 |
A3-1-4 Weight Tray Assembly, Front, No Hitch
| 13***2D | Bolt, M16x50 | 4 |
| 13***6D | Bolt, M20 X 160 | 2 |
| 13***3D | Nut, M16 | 4 |
A3-15-2 Stabiliser, Heavy Duty
| 33***97 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-5-1 Top Link, Front
| 33***57 | Link, Top | 1 |
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
A3-1-2 Weight Tray Assembly, Front, With Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 33***57 | Link, Top | 1 |
A3-2-3 Hitch Front, Top Link Storage
| 13***3D | Nut, M16 | 2 |
| 14***1D | Washer, M16 | 4 |
| 82***28 | Pin, Lynch | 2 |
A3-22-2 Trailer Coupling, Ladder Hitch, 30mm, Rockinger 850rb
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-3-2 Front Din Plate, Weight Carrier, Single
| 48***72 | Pin, Lynch | 3 |
| 48***04 | Pin, Spiral | 4 |
| 48***05 | Pin, Locking | 2 |
A3-6-1 Front Lower Links, Cat 3
A3-15-1 Stabiliser, Standard Compression
| 33***96 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-11-2 Hitch, Rear, Linkage, 85mm/90mm Lift Rams
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***1Z | Bolt | 2 |
A3-1-5 Weight Carrier, Front Single, Direct Mounting
| 13***8D | Setscrew, M12 X 30 | 4 |
| 13***5D | Bolt, M10x65 | 8 |
| 13***5D | Bolt, M16x150, Dacromet | 2 |
A3-22-5 Trailer Coupling, Scharmuller D3
| 33***34 | Coupling, Trailer, D3 - 50mm Pin | 1 |
| 33***16 | Pin, Locking | 1 |
| 33***39 | Pin, Locking | 2 |
A3-20-4 Swinging Drawbar, With Piton, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-23-2 Roller Drawbar, Heavy Duty
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-13-2 Top Link Assembly, Eye End, 80mm/85mm/90mm Lift Rams
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
| 33***57 | Rod, Adjusting | 1 |
A3-19-1 Drawbar
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-30-1 Rear Deck
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***2D | Setscrew, M16 X 50mm | 4 |
| 13***3D | Nut, M16 | 5 |
A3-20-2 Swinging Drawbar, With Piton, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-14-1 Lift Rod Assembly, Standard
| 47***07 | Nipple, Grease | 2 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-1-1 Weight Tray Assembly, Front, No Hitch
| 13***2D | Bolt, M16x50 | 4 |
| 13***6D | Bolt, M20 X 160 | 2 |
| 13***3D | Nut, M16 | 4 |
A3-16-2 Rear Lower Links, Cat 3, 85/90mm Lift Rams
| 33***54 | Link, Lower, Left Hand Cat.3 | 1 |
| 33***55 | Link, Lower, Right Hand Cat.3 | 1 |
| 47***39 | Kit-Hook End | 1 |
A3-16-1 Rear Lower Links, Cat 3, 80mm Lift Rams
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***39 | Kit-Hook End | 1 |
A3-12-1 Pickup Hitch
| 14***0Z | Washer, Plain | 4 |
| 14***2Z | Washer | 2 |
| 33***66 | Retainer, Hook Keeper | 1 |
A3-10-1 Hitch, Rear
| 13***5D | Setscrew, M8x20 | 2 |
| 13***9D | Bolt, M10 X 35mm Long | 4 |
| 13***6D | Bolt, M20 X 70mm | 6 |
A3-14-2 Lift Rod Assembly, Heavy Duty
| 33***56 | Rod, Lift, Assembly | 2 |
| 47***07 | Nipple, Grease | 3 |
| 47***03 | Shaft | 1 |
A3-4-1 Front Towing Point
A3-22-1 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-20-1 Swinging Drawbar, Without Piton, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
A3-22-4 Trailer Coupling, Ladder Hitch, 38mm, Rockinger 860d
| 33***21 | Coupling, Trailer Towing, Rockinger 860d01 | 1 |
| 33***34 | Kit-Lever | 1 |
| 33***35 | Kit-Spring | 1 |
A3-2-2 Hitch Angle Sensor
| 13***3D | Screw, M5x16 | 1 |
| 13***3D | Setscrew | 1 |
| 13***0D | Setscrew | 2 |
A3-13-1 Top Link Assembly, Hook End, 80mm/85mm/90mm Lift Rams
| 33***04 | Link, Top Assembly, Cat 3 Hook End | 1 |
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
A3-3-1 Front Din 3 Plate, & Tow Point
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***9D | Bolt, M12x35 | 10 |
| 13***0D | Bolt, M12 X 40 | 10 |
A3-30-2 Rear Deck, Weight Carrier
| 13***5D | Screw, M12 X 20mm Long | 2 |
| 13***0D | Bolt | 2 |
| 13***9D | Bolt, M16x90 | 8 |
B Bodywork, Cab, Loader End
B1-8-1 Mountings, Front & Rear Lights
| 13***7D | Setscrew, M8x25 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***0D | Setscrew, M10 X 40mm | 4 |
B1-6-4 Fenders, Front, Abs
| 13***3Z | Screw, M6x16 | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
B1-6-1 Fenders, Front
| 13***3Z | Screw, M6x16 | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
B1-3-1 Tank, Diesel Fuel
| 13***5D | Screw, M5x20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***0D | Bolt | 1 |
B1-1-10 Rear Crossmember, Utility
| 13***6D | Bolt, M20 X 70mm | 10 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 10 |
| 14***2D | Washer, Plain | 20 |
B1-7-1 Fenders, Rear
| 13***0D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***8D | Setscrew, M10 X 30 | 8 |
B1-7-2 Fender Extensions, Rear, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
B1-1-2 Chassis & Fittings
| 13***9D | Screw, M12x35mm Long | 8 |
| 13***6D | Bolt | 6 |
| 13***8D | Bolt | 4 |
B1-1-11 Chassis & Fitments, Extended Wheelbase, Conversions 750mm
| 13***3Z | Nut, M20 | 12 |
| 13***18 | Capscrew | 12 |
| 14***2Z | Washer, M20 | 24 |
B1-2-1 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***3D | Nut, Self Lock M10 | 4 |
B1-10-1 Quiet Build Kit
| 13***5D | Setscrew, M6 X 20mm Long | 12 |
| 13***3D | Nut, M6 Lock | 4 |
| 14***1D | Washer, Large | 4 |
B1-4-1 Pannier Unit, Left Hand
| 13***7D | Setscrew, M8x25 | 0 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 0 |
B1-7-3 Fender Extensions, Rear Abs, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
B1-5-2 Bonnet & Fittings
| 13***8D | Bolt, M6 X 30 | 7 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-5-1 Bonnet & Fittings
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-1-3 Chassis & Fittings
| 13***6D | Bolt | 12 |
| 13***3D | Nut, M16 | 12 |
| 14***1D | Washer, M16 | 12 |
B1-4-3 Toolbox
| 12***71 | Padlock | 1 |
| 12***55 | Handle | 1 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B1-1-12 Chassis & Fitments, Extended Wheelbase, Conversions 1450mm
| 13***3Z | Nut, M20 | 16 |
| 13***22 | Capscrew, Socket Head, M20 X 120 | 16 |
| 14***2Z | Washer, M20 | 32 |
B1-8-2 Mountings, Front & Rear Lights
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***9D | Screw, M12x35mm Long | 6 |
| 13***3D | Nut, Self Lock M10 | 4 |
B1-1-1 Chassis & Fittings
| 13***5Z | Bolt | 8 |
| 13***6Z | Bolt, M16 X 70mm | 6 |
| 13***8Z | Bolt, M16 X 80 | 4 |
B1-4-2 Step, Cab Access, Right Hand
| 13***8D | Setscrew, M10 X 30 | 8 |
| 13***3D | Nut, Self Lock M10 | 14 |
| 33***00 | Step, Metal Tread | 3 |
B1-6-3 Fender Extensions, Front, Optional
| 13***7Z | Screw, M6 X 25mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
B2-14-1 Visor, Sun
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 33***34 | Blind, Sunvisor, Roller Type | 1 |
B2-8-3 Filter, Air Conditioning
| 32***47 | Filter, Foam Pre-Cleaner | 1 |
| 32***32 | Filter, Carbon, Cab Aircon | 1 |
| 33***46 | Tray, Repair | 1 |
B2-3-1 Door, Left Hand
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***8D | Setscrew, M10 X 30 | 2 |
B2-2-2 Windscreen, Heated
| 82***54 | Windscreen, Heated | 1 |
B2-11-6 Seat Suspension Unit, Standard, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-9-1 Soundproofing, Cab
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 24***02 | Grommet | 1 |
| 24***03 | Grommet | 1 |
B2-4-1 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 7 |
B2-8-2 Filter, Air Conditioning
| 13***1Z | Nut, M5-8 | 2 |
| 14***1D | Washer, Large | 2 |
| 32***66 | Filter, Carbon, Cab Aircon | 1 |
B2-11-7 Seat Suspension Unit, High-Spec, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-6-1 Ducts, Mouldings, Floormat & Covers, Standard Builds
| 13***3D | Setscrew | 27 |
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***5D | Setscrew, M8x20 | 8 |
B2-1-4 Cab Assembly, Utility (Orange)
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-6-2 Ducts, Mouldings, Floormat & Covers, Plus Builds
| 13***3D | Setscrew | 23 |
| 13***5D | Setscrew, M6 X 20mm Long | 15 |
| 13***5D | Setscrew, M8x20 | 11 |
B2-3-7 Cab Door, Finishing Components
| 13***5D | Setscrew, M8x20 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 2 |
B2-1-3 Cab Assembly
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-11-3 Seat, Suspension, High-Spec
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-2-3 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***43 | Adhesive, & Sealant, 310ml Cartridge | 0 |
B2-7-1 Cab, Console, Instrument Panel, Covers & Brackets
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-8-1 Outlet Ducts, Air Conditioning
| 13***5Z | Bolt | 5 |
| 14***6Z | Washer, M6 | 5 |
| 14***04 | Screw | 6 |
B2-11-4 Seat Suspension Unit, Standard, Top
| 40***05 | Kit-Lever Locking | 1 |
| 40***06 | Kit-Isolator | 1 |
| 40***07 | Kit-Handle | 1 |
B2-3-6 Door, Left Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***9D | Setscrew, M8x35 | 2 |
B2-11-19 Seat Suspension, Kit Wear Parts, High Spec
| 40***14 | Washer | 1 |
| 40***49 | Roller | 1 |
| 40***51 | Screw | 1 |
B2-9-3 Grommets & Fillers, Cab Frame
| 24***02 | Grommet | 1 |
| 24***03 | Grommet | 1 |
| 24***05 | Grommet | 1 |
B2-4-2 Window, Rear, Heated
| 82***86 | Window, Rear Heated | 1 |
B2-3-5 Door, Right Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***9D | Setscrew, M8x35 | 2 |
B2-3-4 Mirrors, External, Electric, Heated & Adjustable
| 33***03 | Mirror, Heated 12volt, Left Hand Assembly | 1 |
| 33***06 | Mirror, Heated 12volt, Right Hand Assembly | 1 |
B2-11-1 Cab Seats, Installation
| 13***7D | Setscrew, M8x25 | 10 |
| 13***9D | Setscrew, M8x35 | 4 |
| 13***1D | Nut, M8 | 2 |
B2-5-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
B2-3-3 Mirrors, External, Standard
| 15***64 | Mirror, Glass,Raydyot | 1 |
| 15***65 | Kit-Mirror Fixing, Raydyot | 1 |
| 47***00 | Mirror, Standard | 2 |
B2-2-1 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***24 | Glass, Door | 2 |
| 82***50 | Glazing, Front Screen | 1 |
B2-10-1 Soundproofing, Cab Base
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 44 |
| 33***76 | Panel, Insulation, Bulkhead Top | 1 |
B2-11-17 Seat Suspension Unit, High-Spec, Bottom, Heated
| 40***14 | Washer | 2 |
| 40***22 | Bracket | 1 |
| 40***23 | Kit-Cable Connecting | 1 |
B2-11-5 Seat Suspension Unit, High-Spec, Top
| 40***03 | Kit-Level Control | 1 |
| 40***04 | Kit-Upper Suspension | 1 |
| 40***05 | Kit-Lever Locking | 1 |
B2-13-1 Seat Belt
| 13***6D | Setscrew, 7/16unf | 4 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
B2-1-1 Cab Assembly
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-1-6 Cab Assembly, Utility (Orange)
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-11-13 Seat, Suspension, High-Spec, Heated
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-11-15 Seat Suspension Unit, High-Spec, Top, Heated
| 40***07 | Kit-Handle | 1 |
| 40***08 | Guide | 1 |
| 40***09 | Handle | 1 |
B2-1-5 Cab Assembly
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-9-2 Soundproofing, Cab Roof
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 14***1D | Washer, Large | 5 |
| 14***3Z | Screw, Self-Tapper | 4 |
B2-15-1 Light, Working, Blanking Kit
B2-3-2 Door, Right Hand
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***8D | Setscrew, M10 X 30 | 2 |
B2-11-2 Seat, Suspension, Standard
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-1-2 Cab Assembly, Utility (Orange)
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-12-1 Seat, Passenger
| 40***14 | Washer | 2 |
| 40***86 | Kit-Headrest, Dynamic Yellow | 1 |
| 40***10 | Screw | 7 |
B5-1-2 Decals, External, 3220
| 13***3D | Nut, M6 Lock | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 81***50 | Label, Transmission Filler | 1 |
B5-9-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-10-1 Lubricants & Filters
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
| 32***35 | Element, Main Air Filter | 1 |
B5-10-2 Lubricants & Filters
| 02***70 | Element, Oil Filter, Canister Type | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
B5-1-1 Decals, External, 3190
| 13***3D | Nut, M6 Lock | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 81***50 | Label, Transmission Filler | 1 |
B5-2-1 Decals, Internal, Standard Build
| 33***53 | Label, Hitch Release | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-1-0 Identification, Serial Plates
B5-4-1 Decals, North American, Homologation
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
| 81***80 | Plate, Warning, Lift Control | 1 |
B5-1-3 Decals, External, 3170
| 13***3D | Nut, M6 Lock | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 81***50 | Label, Transmission Filler | 1 |
B5-2-2 Decals, Internal, Plus Build
| 33***53 | Label, Hitch Release | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
C Electrics-Machine, Cab & Engine
C1-5-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C1-4-2 Light, Head, Right Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***55 | Light, Head Assembly, Right Hand Dip | 2 |
C1-10-3 Ground Radar, Installation, Alternative
| 13***3D | Setscrew | 3 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-10-4 Radar Installation, Alternative
| 13***3D | Setscrew | 3 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-3-3 Harnesses, Cab, Standard Build
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 20 |
| 24***03 | Grommet | 5 |
| 26***03 | Clip, Mounting | 2 |
C1-3-13 Harnesses, Italian Build
| 71***00 | Harness, Auxiliary, Number Plate Lamp | 1 |
| 72***12 | Harness, Chassis, 750mm Extension | 1 |
| 72***64 | Harness, Abs Chassis, 750 Extension | 1 |
C1-3-2 Harnesses, Chassis, Plus Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 150 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
C1-10-2 Radar Installation
| 13***3Z | Bolt | 4 |
| 13***28 | Bolt, M20 X 180 (10.9) | 2 |
| 13***3Z | Nut, Self Lock | 2 |
C1-10-1 Radar Installation
| 13***3Z | Bolt | 4 |
| 13***28 | Bolt, M20 X 180 (10.9) | 2 |
| 13***3Z | Nut, Self Lock | 2 |
C1-3-12 Harness Connectors, Repair Ip67 Standard
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C1-3-7 Harnesses, Chassis, Mechanical Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 150 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
C1-3-4 Harnesses, Cab, Plus Build
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 20 |
| 24***03 | Grommet | 5 |
| 26***03 | Clip, Mounting | 2 |
C1-2-1 Electrical Equipment
| 14***11 | Seal, Bonded | 1 |
| 32***30 | Indicator, Assembly | 1 |
| 33***52 | Boot, Warning Buzzer | 1 |
C1-9-1 Horn, Single Tone
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***8D | Washer, M10 | 2 |
| 26***01 | Clip, Connector | 1 |
C1-7-1 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-1-2 Battery & Fittings, Plus Builds
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***2D | Bolt, M12 X 50mm Long | 1 |
C1-3-8 Harnesses, Cab, Mechanical Build
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 20 |
| 24***03 | Grommet | 5 |
| 26***03 | Clip, Mounting | 2 |
C1-3-6 Harnesses, Auxiliary Worklights
| 72***91 | Harness, Auxiliary Worklights, 8 Front - 6 Rear | 1 |
| 72***93 | Harness, Auxiliary Worklights, 6 Front - 6 Rear | 1 |
| 72***94 | Harness, Auxiliary Worklights, 4 Front - 4 Rear | 1 |
C1-3-11 Harness Connectors, Sumitomo
| 72***16 | Terminal, Crimp | 2 |
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
C1-6-1 Light, Rear Fog
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-4-3 Light, Working, Auxiliary, Front Light Bar
| 70***89 | Light, Oval Working, Right Hand | 1 |
| 70***90 | Light, Oval Working, Left Hand | 1 |
| 70***07 | Reflector Lens, Near Range | 1 |
C1-1-1 Battery & Fittings, Standard
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***2D | Bolt, M12 X 50mm Long | 1 |
| 13***1D | Nut, M8 | 8 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 14***7Z | Washer, Shakeproof | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-3-1 Harnesses, Chassis, Standard Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 150 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
C1-3-5 Harnesses, Edc Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***2Z | Nut, Thin M20 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-4-1 Light, Head, Left Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
| 70***54 | Light, Head Assembly, Left Hand Dip | 2 |
C1-3-10 Harness, Non Abs, Sealing Parts
| 72***08 | Connector, Weatherpack Cavity, Seal, Green Packard | 9 |
| 72***54 | Housing, 2 Way Metripack, 150 Fm(Pin) | 1 |
| 72***09 | Housing, 3 Way Receptical, Packard | 1 |
C2-3-2 Motor, Starter, 12.Volt
| 71***76 | Motor, Starter | 1 |
C2-14-1 Alternator, 12.Volt
| 33***49 | Pulley, Alternator | 1 |
| 71***32 | Capscrew, Socket Head | 4 |
| 71***15 | Alternator, 150amp | 1 |
C2-15-1 Alternator Mountings
| 02***07 | Bolt, M8x1.25x25 | 3 |
| 02***19 | Screw | 1 |
| 02***22 | Screw, Flange Head, M10 X 25 | 1 |
C2-13-1 Motor, Starter, 12.Volt
| 71***76 | Motor, Starter | 1 |
C2-1-1 Electrical Equipment
| 02***02 | Screw, M8 X 20mm | 3 |
| 02***14 | Screw, Flange Head, 8.8 | 1 |
| 02***39 | Screw | 1 |
C2-3-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-6-1 Engine Block Heater, 120v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-2-3 Circuit, Induction Heater
| 13***3D | Screw, M5x16 | 4 |
| 13***3D | Setscrew | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
C2-5-1 Alternator Mountings
| 02***61 | Spacer | 1 |
| 02***07 | Bolt, M8x1.25x25 | 4 |
| 02***20 | Nut | 2 |
C2-6-2 Engine Block Heater, 240v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-4-1 Alternator
| 33***49 | Pulley, Alternator | 1 |
| 71***32 | Capscrew, Socket Head | 4 |
| 71***15 | Alternator, 150amp | 1 |
C2-11-1 Electrical Equipment
| 70***21 | Switch, Vacuum Pressure | 1 |
| 70***65 | Switch, Engine Oil Pressure | 1 |
| 71***15 | Alternator, 150amp | 1 |
C2-2-2 Circuit, Induction Heater
| 13***3D | Screw, M5x16 | 4 |
| 13***5D | Screw, M5x20 | 4 |
| 13***3D | Setscrew | 5 |
C2-2-1 Circuit, Induction Heater
| 13***3D | Screw, M5x16 | 4 |
| 13***3D | Setscrew | 5 |
| 13***1D | Nut, Plain M5 | 1 |
C3-13-2 Mirrors, External, Electric, Heated & Adjustable
| 33***03 | Mirror, Heated 12volt, Left Hand Assembly | 1 |
| 33***06 | Mirror, Heated 12volt, Right Hand Assembly | 1 |
| 48***83 | Actuator, Mirror | 1 |
C3-8-1 Radio, Optional
| 71***00 | Aerial | 1 |
| 71***01 | Speaker | 2 |
| 71***02 | Grille, Speaker | 2 |
C3-3-6 Control Panel, With Rear Hitch, Plus Builds
| 13***3D | Nut, M6 Lock | 2 |
| 24***09 | Grommet | 3 |
| 33***58 | Plate, Switch & Ashtray, Winter Pack | 1 |
C3-9-2 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***8D | Setscrew, M10 X 30 | 1 |
C3-9-5 Heater Assembly
| 13***3Z | Nut | 4 |
| 30***60 | Heater, Assembly | 1 |
| 30***26 | Filter, Recirculation | 1 |
C3-5-2 Fuse Box & Relays, Rear, Plus Builds
| 13***5D | Screw, M5x20 | 6 |
| 13***1D | Screw, Set M6x12 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
C3-12-2 Light, Working, Front & Rear, Cab Roof
| 24***08 | Grommet, Blind | 8 |
| 70***81 | Light, Working, Right Hand; Standard, Right Hand Front/Left Hand Rear. For 6 Front And 4 Rear Option Add 3 Units, Light, Working, Right Hand; Standard, Right Hand Front/Left Hand Rear. For 6 Front And 4 Rear Option Add 3 Units, 8 Front And 6 Rear Option Add 5 Units., Light, Working, Right Hand | 2 |
| 70***82 | Light, Working, Left Hand, Light, Working, Left Hand; Standard, Left Hand Front/Right Hand Rear. For 6 Front And 4 Rear Option Add 3 Units, 8 Front And 6 Rear Option Add 5 Units., Light, Working, Left Hand; Standard, Left Hand Front/Right Hand Rear. For 6 Front And 4 Rear Option Add 3 Units | 2 |
C3-14-2 Power Supply, Auxiliary, Without Convenience Socket
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 4 |
C3-10-1 Wash/Wipe, Windscreen
| 13***1D | Screw, Set M6x12 | 3 |
| 13***1D | Nut, Plain | 3 |
| 13***3D | Nut, Self Lock M8 | 4 |
C3-5-1 Fuse Box & Relays, Rear, Standard
| 13***5D | Screw, M5x20 | 4 |
| 13***1D | Screw, Set M6x12 | 2 |
| 13***1D | Nut, Plain M5 | 0 |
C3-13-1 Electrics, Heated Windscreen, & Heated/Adjustable Mirrors
| 13***1D | Nut, Plain | 10 |
| 24***07 | Grommet | 2 |
| 33***03 | Mirror, Heated 12volt, Left Hand Assembly | 1 |
C3-9-4 Air Conditioning, Unit Assembly
| 13***1Z | Screw, M4 X 12 | 8 |
| 13***3Z | Nut | 2 |
| 30***31 | Evaporator, Assembly | 1 |
C3-4-1 Fuse Box & Relays, Front, No Auxiliary Lights
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-3-2 Control Panel, With Rear Hitch, Plus Builds
| 24***09 | Grommet | 3 |
| 33***58 | Plate, Switch & Ashtray, Winter Pack | 1 |
| 33***60 | Plate, Vansco | 1 |
C3-12-4 Light, Number Plate
| 24***09 | Grommet | 2 |
| 33***83 | Gasket, Foam, Number Plate Light | 1 |
| 70***00 | Light, Number Plate | 2 |
C3-9-7 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***1D | Setscrew, M8x45 | 1 |
C3-4-2 Fuse Box & Relays, Front, With Auxiliary Lights
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-9-3 Heater, Installation
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5Z | Bolt | 8 |
| 13***8D | Setscrew, M12 X 30 | 1 |
C3-7-4 Lights, Cab Interior, & Ag Panel
| 14***02 | Screw | 2 |
| 47***20 | Tape, Seal | 1 |
| 47***07 | Light, Ag Panel | 1 |
C3-14-1 Power Supply, Auxiliary, With Convenience Socket
| 13***3Z | Screw, M6x16 | 3 |
| 13***5Z | Bolt | 2 |
| 13***1Z | Nut, M5-8 | 1 |
C3-3-7 Control Panel, With Rear Hitch, Plus Builds, Australian No Spool Valves
| 24***09 | Grommet | 3 |
| 33***58 | Plate, Switch & Ashtray, Winter Pack | 1 |
| 33***39 | Plate, Switch & Ashtray, No Winter Pack | 1 |
C3-2-1 Switches, Cab Rear
| 24***09 | Grommet | 3 |
| 26***01 | Clip, Connector | 1 |
| 33***34 | Plate, Ignition Switch, Winterised | 1 |
C3-3-5 Switches & Sensor, Rear Hitch Control, External
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 1 |
C3-11-1 Washer Kit, Windscreen
| 13***5Z | Bolt | 2 |
| 24***03 | Grommet | 2 |
| 47***03 | Grommet | 2 |
C3-14-3 Power Supply, Auxiliary,Plus Build, With Convenience Socket
| 13***1Z | Nut, M5-8 | 1 |
| 33***59 | Plate, Auxiliary Power | 1 |
| 71***00 | Socket, Beacon | 1 |
C3-9-1 Air Conditioning, Installation, Cab
| 13***5D | Setscrew, M6 X 20mm Long | 10 |
| 30***93 | Unit, Air Conditioning, Assembly | 1 |
| 30***38 | Unit, Air Conditioning, Assembly | 1 |
C3-2-2 Switches, Cab Rear
| 24***09 | Grommet | 3 |
| 26***01 | Clip, Connector | 1 |
| 33***34 | Plate, Ignition Switch, Winterised | 1 |
C3-3-1 Control Panel, With Rear Hitch, Standard
| 33***99 | Plate, Switch, A.G Panel | 1 |
| 47***00 | Switch; A=Front Power Take-Off, B=2/4wd, C=Rear Power Take-Off. If Front And Rear Power Take-Off Fitted, Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fited., Switch, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only., Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fitted., Switch; A=Blanked, B=2/4wd, C=Rear Power Take-Off. If Rear Power Take-Off Only, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only | 0 |
| 48***05 | Switch, 4wd Power Take-Off, Assembly | 1 |
C3-7-3 Ashtray & Lighter
| 26***90 | Ashtray | 1 |
| 33***81 | Ashtray | 1 |
| 33***81 | Plate, Ashtray Retaining | 1 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 64***00 | Tube | 0 |
| 71***01 | Jet, Windscreen Washer | 1 |
C3-7-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 70***00 | Switch, Door Light | 2 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-3-4 Switch Panel, Front Draft Control
| 33***21 | Knob, Control, Setpoint Setting | 1 |
| 33***22 | Knob, Control | 2 |
| 33***23 | Lever, Main Lift Control; Supp No Changed From 1.532.000.002. Ref, R Bryant 21/04***05.P Gamble. | 1 |
C3-9-6 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***1D | Setscrew, M8x45 | 1 |
C3-12-5 Light, Brake, High Level
| 24***13 | Grommet, 31.8 Panel Hole X 3.5 Thk | 1 |
| 33***90 | Foam, Brake Light Blanking | 1 |
| 70***88 | Light, Brake, High Level | 1 |
C3-1-1 Instrumentation, Front
| 24***02 | Grommet | 2 |
| 24***05 | Grommet, Blind,Hole Dia 12.7mm, Panel Thkness 2-3mm | 1 |
| 47***50 | Light, Block Assembly, Trailer Park Brake, Light, Block Assembly, Trailer Park Brake; Italian Option. For Use With 'Safim' Trailer Brake Valve | 1 |
C3-12-1 Light, Head, Right Hand Dip, Auxiliary
| 24***13 | Grommet, 31.8 Panel Hole X 3.5 Thk | 2 |
| 33***03 | Bracket, Auxiliary-H/Light Mounting, Right Hand | 1 |
| 33***04 | Bracket, Auxiliary-H/Light Mounting, Left Hand | 1 |
C3-12-3 Light, Working, Auxiliary, 'A'Post
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 33***80 | Bracket, Exhaust Auxiliary-W/Light, Right Hand | 1 |
| 33***81 | Bracket, Auxiliary Worklight, Left Hand | 1 |
C3-7-2 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 47***90 | Light, Mask | 1 |
C3-15-1 Harnesses, Legals : Ireland 50kph
| 72***03 | Harness, Column Switch, 30kph, Harness, Column Switch, 30kph; Switch. Fit Between Main Harness And Left Hand Column | 1 |
| 72***04 | Harness, Air Ram, 30kph | 1 |
| 81***33 | Decal, 30kph | 1 |
C3-12-6 Light, Side Indicator
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 4 |
| 24***10 | Grommet | 1 |
| 33***45 | Bracket, Mounting, Left Hand | 1 |
C3-8-2 Radio, Optional
| 33***17 | Bracket, Radio Rear Support | 1 |
| 71***00 | Aerial | 1 |
| 71***00 | Cover, Radio Blanking; Replaces 69***51, For Radio See C3-11-1. Fitted Inplace Of Radio., Cover, Radio Blanking; Replaces 69***51 | 1 |
C3-3-3 Switch Panel, Rear Draft Control
| 33***21 | Knob, Control, Setpoint Setting | 1 |
| 33***22 | Knob, Control | 2 |
| 33***23 | Lever, Main Lift Control; Supp No Changed From 1.532.000.002. Ref, R Bryant 21/04***05.P Gamble. | 1 |
C3-14-4 Power Supply, Auxiliary,Plus Build, Without Convenience Socket
| 33***59 | Plate, Auxiliary Power | 1 |
| 71***00 | Socket, Beacon | 1 |
| 71***01 | Socket, 3 Pin Power | 1 |
C3-6-1 Switch, Column
| 60***3Z | Screw, Countersunk | 2 |
| 70***00 | Switch, Column Indicator | 1 |
| 70***00 | Switch, Column, Power Range Change | 1 |
D Controls-Machine, Engine & Steering
D1-2-1 Gearshift, Air Assisted, Range Change
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-2-11 Gearshift, Air Assisted, Range Change
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-3-1 Brake, Parking
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
D1-7-2 Control, Power Take Off, Plus Builds
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3D | Nut, M6 Lock | 7 |
| 13***3D | Nut, Locking M4 | 2 |
D1-8-1 Control, Pick Up Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
D1-2-3 Ram, Assembly, Pneumatic Gearchange
| 47***62 | Elbow, 1/8" X 6mm | 3 |
| 47***88 | Nut | 2 |
| 47***91 | Clevis, Assembly | 2 |
D1-1-10 Cable Gearshift
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***1D | Screw, Set M6x12 | 6 |
| 13***5D | Setscrew, M8x20 | 6 |
D1-1-1 Gearshift, 5 Or 6 Speed Gearbox
| 12***02 | Plate, Compression | 2 |
| 13***3Z | Screw, M6x16 | 1 |
| 13***5Z | Bolt | 6 |
D1-6-1 Control, Valve Flow
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***33 | Knob, Control; Same As 47***17 | 1 |
D1-7-1 Control, Power Take Off, Standard
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3D | Nut, M6 Lock | 7 |
| 13***3D | Nut, Locking M4 | 2 |
D1-5-1 Control, Hydraulic, 3 & 4 Spool Valves
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***3D | Nut, M6 Lock | 1 |
D1-9-1 Control, Ladder Hitch Release
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 2 |
D1-4-1 Controls, Brake & Clutch
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***9D | Setscrew, M8x35 | 3 |
D1-2-2 Valve Assembly, Pneumatic
| 25***48 | Valve, Manifold Assembly, 4 Station | 1 |
| 47***67 | Manifold, 4 Station | 1 |
| 47***69 | Adapter, Straight Connector | 8 |
D2-11-1 Control, Throttle
| 13***3D | Setscrew | 2 |
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 4 |
D2-2-1 Control, Throttle, Foot
| 13***5D | Setscrew, M8x20 | 4 |
| 13***0D | Bolt, M6x40 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
D2-1-1 Control, Hand Throttle
| 13***3D | Setscrew | 6 |
| 13***1D | Nut, Plain | 8 |
| 14***6D | Washer, M6 Plain | 14 |
D3-4-2 Steering Shaft, Intermediate Sliding, Lower
| 13***0Z | Screw, Set, High Tensile | 2 |
| 13***3Z | Nut | 2 |
| 33***34 | Shaft, Sliding 271-344 | 1 |
D3-4-1 Steering Shaft, Intermediate Sliding, Upper
| 13***0Z | Screw, Set, High Tensile | 2 |
| 13***3Z | Nut | 2 |
| 33***33 | Shaft, Sliding 184-242 | 1 |
D3-5-1 Steering Shaft, Intermediate Fixed
| 13***5Z | Bolt, High Tensile | 3 |
| 13***0Z | Screw, Set, High Tensile | 1 |
| 13***3Z | Nut | 1 |
D3-5-2 Steering Shaft, Lower Fixed
| 13***5Z | Bolt, High Tensile | 3 |
| 13***2D | Screw, Set, M10x50 - Grade 10.9 | 1 |
| 13***3Z | Nut | 3 |
D3-1-1 Steering Column, Adjustable
| 13***3D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3Z | Nut, M16 | 1 |
D3-1-2 Steering Column, Adjustable
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Nut, M6 Lock | 2 |
| 33***93 | Wheel, Steering, Splined Hub | 1 |
D3-2-1 Steering, Installation
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***8D | Bolt, M8x30mm | 3 |
| 13***3D | Nut, Self Lock M8 | 3 |
D3-3-1 Motor, Steering
| 47***41 | Steering Drop Arm | 1 |
| 47***55 | Kit, Sector Shaft Sealing | 1 |
| 47***58 | Kit, Pitman Arm Retainer | 1 |
E Hydraulics & Air Including, Steering
E1-15-4 Circuit, Flow Divider, Rear, Without Trailer Brake Valve, Plus Builds
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***04 | Nut | 1 |
E1-2-3 Circuit, Cooling, Transmission
| 13***1D | Setscrew, M5 X 12mm Long | 3 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
E1-2-1 Circuit, Cooling, Transmission
| 13***1D | Setscrew, M5 X 12mm Long | 3 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
E1-11-1 Circuit, Auxiliary, 3rd Spool, Front
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***3D | Nut, M6 Lock | 4 |
E1-17-2 Circuit, Auxiliary Bypass, With Flow Divider
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***1D | Screw, Grub M10 X 6 | 1 |
| 14***11 | Seal, Bonded | 2 |
E1-12-1 Circuit, Auxiliary, 4th Spool, Front, Standard
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-2-2 Circuit, Transmission
| 13***8Z | Screw, M8x30 | 1 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-1-2 Circuit, Neutral, Plus Builds
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-1-1 Circuit, Neutral, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-7-1 Circuit, Front Hitch
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 1 |
| 16***03 | Adapter, Male/Female | 1 |
E1-16-1 Circuit, Qrc Drain
| 13***3D | Setscrew | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
E1-12-2 Circuit, Auxiliary, 4th Spool, Front, Plus Builds
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***8D | Setscrew, M10 X 30 | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-17-1 Circuit, Auxiliary Bypass, Without Flow Divider
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***1D | Screw, Grub M10 X 6 | 1 |
| 14***11 | Seal, Bonded | 2 |
E1-8-2 Circuit, Front Hitch Feed, Plus Build
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***9D | Screw, M12x35mm Long | 1 |
| 13***3D | Nut, M12 | 1 |
E1-8-1 Circuit, Front Hitch Feed, Standard
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***9D | Screw, M12x35mm Long | 1 |
| 13***3D | Nut, M12 | 1 |
E1-15-3 Circuit, Flow Divider, Rear, With Trailer Brake Valve, Plus Builds
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-9-4 Circuit, Auxiliary, 3/4 Spool, Rear, Plus Builds Utility
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 16 |
| 33***96 | Cap, Qrc Dust, Grey | 2 |
E1-15-1 Circuit, Flow Divider, Rear, With Trailer Brake Valve, Standard
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-4-1 Circuit, Steering
E1-5-1 Circuit, Differential Lock
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 24***03 | O Ring | 1 |
| 24***09 | Grommet | 1 |
E1-16-2 Circuit, Qrc Drain
| 13***3D | Setscrew | 2 |
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 4 |
E1-6-1 Circuit, Rear Hitch, Standard
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-4-2 Circuit, Steering
| 13***7D | Setscrew, M8x25 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 3 |
| 13***9D | Setscrew, M8x35 | 3 |
E1-13-1 Circuit, Auxiliary, Free Flow Return, Rear
| 13***5Z | Nut | 1 |
| 23***11 | O Ring, 5/8"Bsp | 2 |
| 45***01 | Kit-Seal | 1 |
E1-9-2 Circuit, Auxiliary, 3/4 Spool, Rear, Plus Builds
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 16 |
| 33***96 | Cap, Qrc Dust, Grey | 2 |
E1-15-2 Circuit, Flow Divider, Rear, Without Trailer Brake Valve, Standard
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***04 | Nut | 1 |
E1-14-1 Circuit, Auxiliary, Free Flow Return, Front
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***5Z | Nut | 1 |
E1-17-3 Circuit, Auxiliary Bypass, Without Flow Divider
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 47***63 | Adapter, M22 X 3/8"Bsp | 1 |
| 61***02 | Hose, 3/8in. Hp | 1 |
E1-9-3 Circuit, Auxiliary, 3/4 Spool, Rear, Standard Utility
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 12 |
| 33***96 | Cap, Qrc Dust, Grey | 2 |
E1-9-1 Circuit, Auxiliary, 3/4 Spool, Rear, Standard
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 10 |
| 24***10 | O Ring | 2 |
E1-6-2 Circuit, Rear Hitch, Plus Builds
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-17-4 Circuit, Auxiliary Bypass, With Flow Divider
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 47***63 | Adapter, M22 X 3/8"Bsp | 1 |
| 61***02 | Hose, 3/8in. Hp | 1 |
E1-3-1 Circuit, Front & Rear Pto
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E2-2-1 Pump, Main/Auxiliary, Hydraulic
| 20***00 | Pump, Twin Main/Auxiliary, Hydraulic, 45cc,19cc | 1 |
| 20***23 | Coupling, Muff | 1 |
| 20***39 | Pump, Hydraulic Gear | 1 |
E2-1-1 Pump, Steer & Suspension
| 20***40 | Pump, Steering/Suspension | 1 |
| 20***18 | Seal, Oil, Radial Lip | 2 |
| 20***19 | Retainer | 1 |
E3-1-2 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-1-7 Valve, Assembly, Electronic 4 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-1-21 Valve Mountings, Mechanical Valves
| 13***8D | Screw, M8x30 | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***3D | Nut, Self Lock M10 | 2 |
E3-2-1 Valve, Section, Inlet, With Main Relief
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***45 | O Ring | 2 |
| 25***54 | Plug | 1 |
E3-8-1 Valve, Charge
| 25***98 | Cartridge, Solenoid | 1 |
| 25***50 | Coil, 12v, Deutsch Connector | 1 |
| 25***51 | Valve, Solenoid Assembly | 1 |
E3-11-2 Filter, Transmission Oil
| 32***43 | Filter, Assembly, Transmission Oil | 1 |
| 32***07 | Head Filter, Transmission Oil | 1 |
| 32***08 | Bowl Filter, Transmission Oil | 1 |
E3-2-2 Valve, Section, Inlet, Electronic, With Main Relief
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***45 | O Ring | 2 |
| 25***54 | Plug | 1 |
E3-6-2 Valve, Section, Endplate, Electronic
| 25***73 | Valve, Section, End Cover | 1 |
| 25***53 | Solenoid | 1 |
| 25***55 | Kit-Seal | 1 |
E3-10-2 Filter, Hydraulic, Tank Mounted
| 32***04 | O Ring | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
| 32***92 | Insert | 1 |
E3-9-1 Valve, Flow Regulator, Diverter
| 25***45 | Valve, Flow Divider | 1 |
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
E3-11-1 Filter, Transmission Oil
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E3-1-5 Valve, Assembly, Electronic 5 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-7-1 Valve, Solenoid, Pressure Maintenance
| 13***0Z | Bolt | 4 |
| 13***2Z | Capscrew | 2 |
| 13***8Z | Capscrew, M5 X 30 | 12 |
E3-1-1 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-9-2 Valve, Flow Regulator, Diverter
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
| 25***72 | Kit-Seal | 1 |
E3-1-8 Valve, Assembly, Electronic 5 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-5-1 Valve, Section, Draft Control, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 2 |
| 25***40 | Valve, Section,, Draft Control | 1 |
E3-1-3 Valve, Assembly, Electronic 3 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-1-22 Valve Mountings, Electronic Valves
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***8D | Screw, M8x30 | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
E3-4-2 Valve, Section, Directional Control, Electronic, With Flow Control
| 25***48 | Plug | 1 |
| 25***52 | Spring | 1 |
| 25***54 | Plug | 2 |
E3-4-1 Valve, Section, Directional Control, With Flow Control
| 25***38 | Valve, Section, Directional, With Flow Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-1-4 Valve, Assembly, Electronic 4 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-5-2 Valve, Section, Draft Control, Electronic, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 1 |
| 25***66 | Plug | 2 |
E3-3-1 Valve, Section, Directional Control
| 25***39 | Valve, Section, Directional Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-6-3 Valve, Section, Endplate, Electronic
| 25***66 | O Ring | 1 |
| 25***69 | Filter | 1 |
| 25***74 | Kit-Repair | 1 |
E3-3-2 Valve Section, Directional Control, Electronic
| 25***48 | Plug | 2 |
| 25***49 | Retainer, Spring | 1 |
| 25***53 | Washer | 1 |
E3-10-1 Filter, Hydraulic, Tank Mounted
| 32***04 | O Ring | 1 |
| 32***52 | Filter, Hydraulic, Assembly | 1 |
| 32***90 | Housing, Filter | 1 |
E3-1-6 Valve, Assembly, Electronic 3 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-7-2 Valve, Solenoid, Pressure Maintenance, Deutsch Connectors
| 13***0D | Setscrew | 4 |
| 13***2D | Capscrew, M8 X 120 Long, Grade 12.9 | 2 |
| 13***8Z | Capscrew, M5 X 30 | 0 |
E4-5-1 Ram, Rear Hitch, 80mm
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
| 47***96 | Bearing, Assembly; Cbm Would Not Supply To Jcb.But Skf P/No, Gem 45 Es-2rs. Supplier Code 00220.San 09757 | 1 |
E4-2-1 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-2-2 Ram, Suspension, 'Cushioned', Optional 45mm Heavy Duty
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***13 | Cover, Protective Tube | 1 |
E4-1-1 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-2-3 Ram,, Suspension, 'Cushioned' 50mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 1 |
| 47***62 | Ram, Suspension 50mm | 2 |
E4-4-1 Ram, Front Hitch
| 48***47 | Nipple, Grease | 2 |
| 48***48 | Head, Piston | 1 |
| 48***49 | Bearing, Gland | 1 |
E4-5-2 Ram, Rear Hitch, 85mm
| 47***05 | Nipple, Grease | 2 |
| 47***04 | Ring, Retaining, 85mm Ram | 1 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
E4-5-3 Ram, Rear Hitch, 90mm
| 33***47 | Cylinder, 90mm Lift, Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
F Axles, Wheels & Transmission
F1-12-4 Hub & Components, Front Right Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F1-3-1 Axle Drive Head, 80kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F1-1-4 Axle Assembly, Front, 65kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-1-2 Axle Assembly, Front, 65kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-1-6 Axle Assembly, Front, 55kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-2-2 Hub & Components, Front Right Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-12-3 Hub & Components, Front Left Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F1-2-4 Hub & Components, Front Right Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-11-3 Axle Assembly, Front, 80kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-12-1 Hub & Components, Front Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-13-2 Axle, Drive Head, 65kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F1-2-1 Hub & Components, Front Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-12-2 Hub & Components, Front Right Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-3-3 Axle Drive Head, 55kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 2 |
| 45***02 | Plate, End | 1 |
F1-11-1 Axle Assembly, Front, 80kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-11-2 Axle Assembly, Front, 65kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-13-1 Axle Drive Head, 80kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F1-1-3 Axle Assembly, Front, 80kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-1-1 Axle Assembly, Front, 80kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-3-2 Axle Drive Head, 65kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F1-4-1 Differential, Components, No Spin
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F1-4-2 Differential, Components, Maxtrac
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-2-3 Hub & Components, Front Left Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-11-4 Axle Assembly, Front, 65kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-1-5 Axle Assembly, Front, 55kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F2-2-2 Hub & Components, Rear, Pd90 Abs, Right Hand & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 13***1Z | Nut, Hex M20, High Strength | 32 |
| 13***5Z | Capscrew, M8x20 | 2 |
F2-11-3 Axle Assembly, Rear, 80kph, 12.29 : 1, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-13-1 Axle Drive Head, 80kph, 12.29 : 1
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-2-1 Hub & Components, Rear Pd90, Right Hand & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 45***01 | Carrier, Planetary Hub | 1 |
| 45***02 | Housing, Bearing | 1 |
F2-1-2 Axle Assembly, Rear, 65kph, 16.62 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-1 Axle Assembly, Rear, 80kph, 12.29 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-4-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-1-4 Axle Assembly, Rear, 65kph, 16.62 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-3-2 Axle Drive Head, 65kph, 16.62 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-12-1 Hub & Components, Rear, Right & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 45***01 | Carrier, Planetary Hub | 1 |
| 45***02 | Housing, Bearing | 1 |
F2-13-2 Axle Drive Head, 65kph, 16.62 : 1
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-3-1 Axle Drive Head, 80kph, 12.29 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-12-2 Hub & Components, Rear, Abs, Right Hand & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 13***1Z | Nut, Hex M20, High Strength | 32 |
| 45***01 | Carrier, Planetary Hub | 1 |
F2-11-1 Axle Assembly, Rear, 80kph, 12.29 : 1
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-11-4 Axle Assembly, Rear, 65kph, 16.62 : 1 Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-6 Axle Assembly, Rear, 40kph, 19.8 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-5 Axle Assembly, Rear, 40kph, 19.8 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 8 |
F2-1-3 Axle Assembly, Rear, 80kph, 12.29 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-3-3 Axle Drive Head, 40kph, 19.8 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-11-2 Axle Assembly, Rear, 65kph, 16.62 : 1
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F3-3-4 Wheels & Tyres, 600/65-R28(76"Track), Pirelli
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 33***80 | Wheel, Assembly, Left Hand, Pirelli, 60***28 | 1 |
F3-2-3 Propshafts, Rear Axle, Drive, 1450mm Extended Wheelbase & 6 Wheeler
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-4-1 Wheels & Tyres, 480/70-R30, Goodyear
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-3-10 Wheels & Tyres, Xm27 620/75-R26, Xm27 750/65r26 Michelen, Denmark Option
| 14***1D | Washer, M16 | 6 |
| 15***01 | Valve | 1 |
| 33***57 | Wheel, And Tyre, L.H, Xm27 75***26 | 1 |
F3-6-1 Wheels & Tyres, 16.9-R30, Nokian
| 15***01 | Valve | 1 |
| 33***25 | Wheel, Assembly Nokian, 16.9r30 R/H 10 Stud | 2 |
| 33***26 | Wheel, Assembly, 16.9r30 12 Stud | 2 |
F3-5-2 Wheels & Tyres, 540/65-R30, Michelin
| 13***6Z | Bolt | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-3-1 Wheels & Tyres, 480/70-R30, Pirelli (1880mm Track)
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-6-2 Wheels & Tyres, 520/65-R30 Nokian
| 15***01 | Valve | 1 |
| 33***07 | Wheel, Assembly, 52***30 Nokian | 2 |
| 33***10 | Wheel, Assembly, 52***30 Nokian | 2 |
F3-3-6 Wheels & Tyres, 540/65-R30 Pirelli, 600/65-R28 Pirelli, 65kph Australia Only
| 15***01 | Valve | 1 |
| 33***82 | Wheel, Assembly, Left Hand, Pirelli 60***28 | 1 |
| 33***85 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
F3-9-1 Wheels & Tyres, 680/55-R26.5, Trelleborg
| 15***01 | Valve | 1 |
| 33***73 | Screw, Delimeter | 1 |
| 33***39 | Wheel, And Tyre Assembly, 680/55-R26.5 Frh | 1 |
F3-1-1 Propshafts, Axle Drive, Front
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***3Z | Nut | 4 |
| 82***88 | Bolt, M10x30 | 4 |
F3-7-1 Mounting, Chock
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***67 | Chock, Wheel, Size 3, Folding Type | 2 |
F3-3-7 Wheels & Tyres, 540/65-R34, Continental
| 15***01 | Valve | 1 |
| 33***73 | Screw, Delimeter | 1 |
| 33***39 | Wheel, And Tyre, 54***34, Continental | 1 |
F3-3-2 Wheels & Tyres, 480/70-R30, Pirelli (2015mm Track)
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-6-3 Wheels & Tyres, 440/80-R30 Nokian
| 15***01 | Valve | 1 |
| 33***13 | Wheel, & Tyre Assembly, 44***30 (2015) Lhf | 1 |
| 33***14 | Wheel, & Tyre Assembly, 44***30 (2015) Rhf | 1 |
F3-8-1 Wheels & Tyres, 455/70-R24 Mpt Spt9, Dunlop
| 15***01 | Valve | 1 |
| 33***38 | Wheel, & Tyre Assembly, 76"(1930) Track | 2 |
| 33***92 | Wheel, & Tyre Assembly, 76"(1930) Track | 2 |
F3-4-7 Wheels & Tyres, 540/65 Firestone, (80" Assy)
| 15***01 | Valve | 1 |
| 33***96 | Wheel, & Tyre Assembly, Firestone 540/65 R30 | 1 |
| 33***97 | Wheel, & Tyre Assembly, Firestone 540/65 R30 | 1 |
F3-4-6 Wheels & Tyres, 480/70 Firestone, 2015 (80")
| 15***01 | Valve | 1 |
| 33***94 | Wheel, & Tyre Assembly, Firestone 480/70 R30 | 1 |
| 33***95 | Wheel, & Tyre Assembly, Firestone 480/70 R30 | 1 |
F3-4-5 Wheels & Tyres, 480/70 Firestone, (74" Assy)
| 15***01 | Valve | 1 |
| 33***91 | Wheel, & Tyre Assembly, Firestone 480/70 R30 | 1 |
| 33***92 | Wheel, & Tyre Assembly, Firestone 480/70 R30 | 1 |
F3-3-5 Wheels & Tyres, 480/70-R30 Pirelli, 600/65-R28 Pirelli, Australian Builds
| 15***01 | Valve | 1 |
| 33***31 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
| 33***32 | Wheel, Assembly, Left Hand, Pirelli 60***28 | 1 |
F3-6-4 Wheels & Tyres, 540/65-R30 Nokian
| 15***01 | Valve | 1 |
| 33***19 | Wheel, & Tyre Assembly, 54***30 (2015) Flh | 1 |
| 33***20 | Wheel, & Tyre Assembly, 54***30 (2015) Frh | 1 |
F3-3-8 Wheels & Tyres, 320/70-R26,Michelin
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw20a X 26 | 1 |
| 41***00 | Rim, Wheel, Dw20a X 26 | 1 |
F3-3-9 Wheels & Tyres, Xm27 620/75-R26, Michelen, Denmark Option
| 14***1D | Washer, M16 | 6 |
| 15***01 | Valve | 1 |
| 33***74 | Wheel, And Tyre, L.H, Xm27 62***26 | 1 |
F3-2-1 Propshafts, Axle Drive, Rear
| 82***47 | Nut, Cleveloc | 8 |
| 82***50 | Stud, Bolt | 8 |
| 82***88 | Bolt, M10x30 | 4 |
F3-3-3 Wheels & Tyres, 520/70-R30, Pirelli
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-5-1 Wheels & Tyres, 495/70-R24, Michelin
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-2-2 Propshafts, Rear Axle, Fixed, 1450mm Extended Wheelbase & 6 Wheeler
| 13***2Z | Bolt, M12 X 50mm | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
F3-3-11 Wheels & Tyres, 540/65-R34, Pirelli
| 15***01 | Valve | 1 |
| 33***73 | Screw, Delimeter | 1 |
| 33***68 | Wheel, & Tyre Assembly, 80" (2032mm) Track | 1 |
F5-1-2 Transmission Gearbox, Assembly, Twin Pto, 40/50/65/80kph 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-3-1 Pipework, Pto Drain
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F5-2-1 Transmission Gearbox, Assembly, Single Pto, 40/50/65/80kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-1 Transmission Gearbox, Assembly, Single Pto, 40/50/65/80kph, 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-8 Transmission Gearbox, Assembly, Twin Pto, 65kph 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-6 Transmission Gearbox, Assembly, Twin Pto, 40kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-7 Transmission Gearbox, Assembly, Single Pto, 65kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-5 Transmission Gearbox, Assembly, Single Pto, 40kph, 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-6 Transmission Gearbox, Assembly, Twin Pto, 40kph 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-4-1 Dipstick & Filler, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***26 | Washer, Seal | 1 |
F5-3-2 Pipework, Wet Clutch Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***1Z | Nut | 2 |
F5-2-8 Transmission Gearbox, Assembly, Twin Pto, 65kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-3 Transmission Gearbox, Assembly, Single Pto, 40/50/65/80kph, 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-7 Transmission Gearbox, Assembly, Single Pto, 65kph, 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-4 Transmission Gearbox, Assembly, Twin Pto, 40/50/65/80kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-3 Transmission Gearbox, Assembly, Single Pto, 40/50/65/80kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-2 Transmission Gearbox, Assembly, Twin Pto, 40/50/65/80kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-5 Transmission Gearbox, Assembly, Single Pto, 40kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-3-3 Pipework, Powershift Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***4Z | Bolt | 2 |
F5-1-4 Transmission Gearbox, Assembly, Twin Pto, 40/50/65/80kph 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F6-4-1 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F6-2-1 Gearbox Housing
| 13***9Z | Bolt | 1 |
| 13***1Z | Bolt | 2 |
| 13***7Z | Bolt, Coated | 7 |
F6-7-1 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***07 | Shaft, Selector, Low & Reverse | 1 |
F6-3-2 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F6-1-2 Gearbox, Range, Airshift
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***02 | Gear, Input 40t | 1 |
F6-6-1 Gear Change, 40kph & 80kph, Airshift
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-2-2 Gearbox Housing
| 13***9Z | Bolt | 1 |
| 13***1Z | Bolt | 2 |
| 13***7Z | Bolt, Coated | 7 |
F6-1-1 Gearbox, Range, Airshift
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-5-1 Shaft, Output Group, 4 Wheel Drive
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
| 44***03 | Washer, Thrust; Superseded By 82***82 | 1 |
F7-3-1 Gearbox, 6 Speed, Rear Case Assembly
| 45***12 | Bush, Selector Shaft | 1 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
| 45***46 | Housing, Seal | 1 |
F7-1-1 Gearbox, 6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-9-2 Gearbox, 6 Speed, Remote Control Assy
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F7-7-1 Gearbox, 6 Speed, Mainshaft Assembly
| 45***45 | Bearing, Needle Roller | 2 |
| 45***49 | Plunger | 7 |
| 45***50 | Roller, 8mm | 9 |
F7-9-1 Gearbox, 6 Speed, Remote Control Assy
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F7-2-1 Gearbox, 6 Speed, Front Case Assembly
| 45***12 | Bush, Selector Shaft | 1 |
| 45***16 | Screw, Hammer Drive | 2 |
| 45***24 | Dowel, 8.0 Dia X 16.0mm | 2 |
F7-5-1 Gearbox, 6 Speed, Front Cover Assembly
| 45***97 | Seal, Oil | 1 |
| 45***02 | Cover, Front | 1 |
| 47***76 | Screw | 5 |
F7-4-1 Gearbox, 6 Speed, Input Shaft Assembly
| 45***68 | Bearing, Roller | 1 |
| 47***62 | Shaft, Input Assembly | 1 |
| 47***65 | Spacer | 1 |
F7-8-1 Gearbox, 6 Speed, Selector Controls
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***72 | Fork, Selector 1st/2nd | 1 |
F7-10-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F7-6-1 Gearbox, 6 Speed, Layshaft Assembly
| 45***63 | Circlip, 2.12mm | 0 |
| 45***64 | Circlip, 2.07mm | 0 |
| 45***65 | Circlip, 2.02mm | 0 |
F8-4-2 Clutch Assembly, Medium/High
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-2-2 Clutch Assembly, Power Take Off, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
F8-5-2 Gear Group, Splitter & Pto, Input, Output & Intermediate
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 22***28 | Circlip | 1 |
| 22***85 | Circlip, Internal | 1 |
F8-7-1 Clutch Assembly, Wet Master
| 13***9Z | Screw, M10x35mm | 15 |
| 13***3Z | Bolt, M10 X 55 | 3 |
| 13***21 | Bolt | 12 |
F8-9-1 Clutch Drum, Carrier & Input Gear, Assembly
| 33***85 | Plate, Bearing Cover | 1 |
| 45***24 | Carrier, Clutch & Input Gear | 1 |
| 45***11 | Gear, 27t Power Take-Off Input | 1 |
F8-8-1 Clutch Assembly, Drum, Hub, Pressure Plates
| 13***16 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 22***60 | Circlip | 1 |
F8-3-2 Gearbox Housing, Splitter & Pto, Clutch Assemblies
| 13***9Z | Screw, M10 X 35 | 18 |
| 33***25 | Plate, Friction | 2 |
| 33***26 | Plate, Counter, Brake | 1 |
F8-4-1 Clutch Assembly, Input
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***04 | Retainer, Spring | 1 |
F8-1-4 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-3-1 Gearbox Housing, Splitter & Pto, Clutch Assemblies
| 13***9Z | Screw, M10 X 35 | 18 |
| 33***25 | Plate, Friction | 2 |
| 33***26 | Plate, Counter, Brake | 1 |
F8-4-3 Clutch Assembly, Low
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-1-3 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***01 | Cover, End | 2 |
F8-5-1 Gear Group, Splitter & Pto, Input, Output & Intermediate
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 22***28 | Circlip | 1 |
| 22***85 | Circlip, Internal | 1 |
F8-6-1 Gearbox, Splitter & Pto, Selector Mechanism
| 13***7Z | Bolt, Coated | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***10 | Screw | 2 |
F8-10-1 Solenoid & Valves, Splitter Gearbox
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 16 |
F8-1-1 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***01 | Cover, End | 2 |
F8-1-2 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-2-1 Clutch Assembly, Power Take Off, Front
| 13***7Z | Bolt, Coated | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***33 | Washer, Bonded | 1 |
F9-12-2 Guard, Rear, Power Take Off, Static, French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-1-2 Power Take Off, Front Attachments, Single
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 3 |
F9-11-1 Propshaft, Power Take Off, Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-1-1 Power Take Off, Front Attachments, Twin
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***0Z | Bolt, M10 X 40 | 16 |
F9-11-2 Propshaft,, Rear Power Take Off, Extended Wheelbase Machines.
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-2-2 Gearbox, Power Take Off, Front, ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F9-3-2 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
F9-10-1 Power Take Off, Rear Installation
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F9-2-1 Gearbox, Front P.T.O Transfer
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F9-12-1 Guard, Rear, Power Take Off
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***8Z | Bolt, M12 X 30 | 1 |
F9-3-1 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G Brakes
G1-17-2 Couplings, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-1-3 Brake, System, Single Caliper, Abs
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***8Z | Bolt | 3 |
G1-17-1 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 48***86 | G.A, Palm Couplings, Circuit | 1 |
G1-7-5 Control Line Filter, Trailer Braking, Circuit
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
G1-8-11 Handbrake Circuit
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-12-1 Valve, Footbrake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
| 47***00 | G.A. | 1 |
G1-7-4 Trailer Braking, Circuit, Abs, Twin Line 'C' Coupling
| 13***3D | Setscrew | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-8-2 Handbrake Circuit, Abs
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-5-2 Foot Brake Circuit
| 13***3Z | Screw, M6x16 | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt, M8x40 | 4 |
G1-2-1 Brake Caliper, Front
| 15***61 | Brake, Caliper Assembly, 75mm | 1 |
| 15***18 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***04 | Kit-Seal, Brake Caliper | 2 |
G1-20-2 Valve, Trailer Control, Single Line
| 15***30 | Valve, Trailer Control | 1 |
| 15***55 | Kit-Repair, Major | 1 |
| 15***56 | Kit-Repair, Minor | 1 |
G1-15-1 Brake, Actuator, Parking
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
| 47***34 | Kit-Repair | 1 |
G1-1-4 Brake, System, Twin Caliper, Abs
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***8Z | Bolt | 3 |
G1-7-11 Trailer Braking, Circuit
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-7-3 Trailer Braking, Circuit, Abs, Twin Line Palm Coupling
| 13***3D | Setscrew | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-6-1 Foot Brake, Actuator Circuit
| 13***4D | Screw | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***7Z | Bolt | 4 |
G1-2-2 Brake Caliper, Front, Twin Caliper
| 15***62 | Brake, Caliper Assembly, 60mm | 1 |
| 15***19 | Kit-Brake Pad, C/W Pins & Springs | 1 |
| 47***08 | Nipple, Grease | 1 |
G1-7-16 Trailer Circuit, Twin Coupling Head
| 13***7D | Setscrew, M8x25 | 4 |
| 13***8D | Setscrew, M10 X 30 | 3 |
| 13***3D | Nut, Self Lock M8 | 4 |
G1-11-1 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-32-1 Trailer Brakes, Hydraulic, Single Line (Safim)
| 13***7D | Setscrew, M8x25 | 2 |
| 13***4D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-1-2 Brake, System, Twin Caliper, Non-Abs
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***8D | Bolt, M8x30mm | 4 |
| 13***2D | Bolt, M16x50 | 2 |
G1-6-2 Foot Brake, Actuator Circuit, Abs
| 13***7Z | Bolt, M10x25 | 2 |
| 13***7Z | Bolt | 6 |
| 13***7Z | Bolt, M8 X75mm Long | 6 |
G1-10-1 Air Drier
| 15***84 | Drier, Air, Regenerative | 1 |
| 15***05 | Cartridge, Desiccant | 1 |
| 15***06 | Kit-Heater | 1 |
G1-21-1 Valve, Circuit Protection
| 15***75 | Valve, Circuit Protection | 1 |
G1-7-14 Trailer Circuit, 'C'Couplings, Twin Line
| 45***36 | Coupling, 'C'Male, Yellow | 1 |
| 45***37 | Coupling, 'C' Female, Red | 1 |
| 48***71 | G.A, Twin Line C Coupling, Single Line Hydrauli | 1 |
G1-19-1 Air Coupling, Duomatic
| 13***7D | Setscrew, M8x25 | 2 |
| 45***00 | Coupling, Trailer Brake, Duomatic | 1 |
| 45***01 | Kit-Repair, Duomatic Coupling | 1 |
G1-8-1 Handbrake Circuit
| 47***00 | Brake, Parking Actuator | 1 |
| 64***00 | Tube, Pvc | 0 |
| 64***00 | Pipe, Air 3/8" | 0 |
G1-3-1 Brake Caliper, Rear
| 15***60 | Brake, Caliper Assembly, 60mm | 1 |
| 15***17 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***03 | Kit-Seal, Brake Caliper | 2 |
G1-4-1 Air Charge Circuit
| 02***17 | Olive, 16mm | 1 |
| 13***1D | Setscrew, M8 X 12mm | 1 |
| 13***5D | Setscrew, M8x20 | 2 |
G1-1-1 Brake, System, Single Caliper, Non-Abs
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***8D | Bolt, M8x30mm | 1 |
| 13***8Z | Bolt | 3 |
G1-18-1 Coupling 'C', Trailer Brakes
| 14***2Z | Washer, M20 | 2 |
| 33***43 | Cover, 'C' Coupling | 1 |
| 45***36 | Coupling, 'C'Male, Yellow | 1 |
G1-30-2 Trailer Brakes, Hydraulic, Plus Builds
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-5-11 Foot Brake, Supply Circuit
| 13***8D | Bolt, M6 X 30 | 8 |
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
G1-7-13 Trailer Circuit, Palm Couplings, Twin Line
| 33***43 | Cover, 'C' Coupling | 1 |
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
G1-5-1 Foot Brake Circuit
| 13***3D | Setscrew | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
G1-20-1 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-31-1 Trailer Brake Valve, Hydraulic
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 1 |
G1-7-12 Trailer Braking, Control Line Filter, Circuit
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
G1-4-11 Air Charge Circuit
| 02***17 | Olive, 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, M12 | 3 |
G1-5-12 Foot Brake Circuit
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***11 | Seal, Bonded | 2 |
G1-13-1 Actuator, Air & Hydraulic
| 13***8D | Setscrew, M10 X 30 | 2 |
| 14***8D | Washer, M10 | 2 |
| 15***01 | Chamber, Brake | 1 |
G1-7-15 Trailer Circuit, Duomatic Coupling
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
G1-14-1 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-16-1 Valve, Trailer Control
| 15***25 | Kit-Repair, Brake Valve | 1 |
| 92***79 | Valve, Trailer Control, Single Caliper | 1 |
G1-6-12 Foot Brake, Actuator Circuit, Abs
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***7D | Setscrew, M12 X 25 | 1 |
| 13***7D | Bolt, M8 X 75mm Long | 6 |
G1-16-2 Valve, Trailer Control, With Twin Caliper Brakes
| 15***25 | Kit-Repair, Brake Valve | 1 |
| 92***01 | Valve, Trailer Control, Twin Caliper | 1 |
G1-9-1 Brakes, Trailer Air, Single Line, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
G1-9-11 Brakes, Trailer Air, Single Line, Optional
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Bolt, M6 X 25 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
G1-30-1 Trailer Brakes, Hydraulic, Standard
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-7-1 Trailer Braking, Circuit, Twin Line Palm Coupling
| 13***3D | Setscrew | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-6-11 Foot Brake, Actuator Circuit
| 13***4D | Screw | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***7Z | Bolt | 4 |
G1-7-2 Trailer Braking, Circuit, Twin Line 'C' Coupling
| 13***3D | Setscrew | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
S Suspension
S1-1-1 Suspension, Front
| 13***1D | Screw, M12x45 | 4 |
| 13***1D | Bolt, M20x45, Dacromet | 2 |
| 13***9D | Bolt | 4 |
S1-2-1 Suspension, Front, Heavy Duty
| 13***1D | Screw, M12x45 | 4 |
| 13***1D | Bolt, M20x45, Dacromet | 2 |
| 13***9D | Bolt | 4 |
S2-2-1 Suspension,Rear, Utility
S2-1-1 Suspension, Rear
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
| 13***2D | Bolt, M12 X 50mm Long | 4 |
| 13***0D | Bolt, M12x100, Dacromet | 4 |
S3-1-1 Suspension, Rear, Hydraulics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M6 X 60 | 2 |
S3-2-1 Suspension, Rear, Hydraulics, Heavy Duty
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***3Z | Bolt, M8 X 55 | 1 |
U Engine B Series Tier 2
U1-8-2 Engine Mountings
| 13***2D | Bolt, M12x50 | 2 |
| 13***3D | Nut, M12 | 2 |
| 13***8D | Capscrew, M12 X 30 | 6 |
U1-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***69 | Plate, Cover | 1 |
U1-3-1 Block Assembly
| 02***06 | Plug, Expansion, D=58mm | 5 |
| 02***07 | Plug, Expansion, D=26mm | 4 |
| 02***08 | Plug, Expansion, 17.73mm | 3 |
U1-5-1 Fans, Pulleys, & Fan Belt, Electronic
| 02***41 | Damper, Vibration | 1 |
| 02***44 | Pulley, Accessory Drive | 1 |
| 02***03 | Bolt | 4 |
U1-6-1 Timing Case, Camshaft & Gears
| 02***43 | Seal | 1 |
| 02***49 | Gasket, Gear Housing | 1 |
| 02***54 | Retainer, Belt | 1 |
U1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***1D | Bolt, M16 X 110 | 2 |
| 13***1D | Bolt, M12 X 110, 10.9 | 2 |
U1-1-1 Engine, Complete
| 01***91 | Engine, Complete Qsb200, Assembly; This Engine Replaced By M.S.S,See S.A.N.14442, & S.A.N.14443 Or 045 Screen On Pser. | 1 |
| 01***21 | Engine, Complete Qsb200, Assembly | 1 |
| 01***10 | Engine, Assembly Qsb192, Flexibility | 1 |
U1-6-2 Timing Case, Auxiliary Drive
| 02***75 | O Ring | 1 |
| 02***78 | Hub | 1 |
| 02***79 | Kit-Hub & Gear, Auxiliary Drive | 1 |
U1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***39 | Dowel, Pin | 1 |
| 02***42 | Pin, Gudgeon | 6 |
| 02***43 | Circlip | 2 |
U1-1-3 Engine, Complete, Flexibility
| 01***10 | Engine, Assembly Qsb192, Flexibility | 1 |
U1-1-2 Engine, Complete
| 01***90 | Engine, Complete Qsb220, Assembly; This Engine Replaced By M.S.S,See S.A.N.14442, & S.A.N.14443 Or 045 Screen On Pser. | 1 |
| 01***20 | Engine, Complete Qsb220, Assembly | 1 |
U1-5-2 Fans, Pulleys, & Fan Belt, Mechanical
| 01***25 | Adapter, Fan Drive | 1 |
| 02***41 | Damper, Vibration | 1 |
| 02***44 | Pulley, Accessory Drive | 1 |
U1-1-4 Engine, Complete, Flexibility
| 01***12 | Engine, Assembly Qsb220, Flexibility | 1 |
U1-1-5 Engine, Complete, Non-Certified, Australia/New Zealand Build
| 01***11 | Engine, Assembly Qsb192, Non Certified | 1 |
U1-1-6 Engine, Complete, Non-Certified, Australia/New Zealand Build
| 01***13 | Engine, Assembly Qsb220, Non Certified | 1 |
U2-4-1 Lifting Plates, Engine
| 02***87 | Screw | 1 |
| 02***22 | Screw, Flange Head, M10 X 25 | 3 |
| 02***11 | Bracket, Engine Lifting, Rear | 1 |
U2-1-1 Cylinder Head
| 02***07 | Plug, Expansion, D=26mm | 14 |
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***21 | Nut, 3/8"-24unf, Heavy Hexagon | 12 |
| 02***89 | Valve, Crosshead | 12 |
| 02***03 | Screw, Flange Head Cap | 12 |
U2-3-1 Rocker Cover
| 02***98 | Bush, Isolator | 5 |
| 02***00 | Cover, Rocker | 1 |
| 02***01 | Gasket, Rocker Cover | 1 |
U3-1-1 Manifold, Induction, And Induction Heater
| 02***79 | Gasket, Induction Manifold | 1 |
| 02***00 | Heater, Engine | 1 |
| 02***75 | Cover, Induction Manifold | 1 |
U3-3-1 Filter, Air
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***8D | Washer, M10 | 4 |
| 22***16 | Clip, Jubilee | 2 |
U3-2-1 Manifold, Exhaust
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***36 | Nut | 4 |
| 02***78 | Stud | 4 |
U3-4-2 Exhaust System, With, Exhaust Aspirator
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
U3-4-1 Exhaust System
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***1D | Setscrew, M8 X 12mm | 6 |
U4-2-1 Thermostat & Housing
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***98 | Seal, Rectangular Ring | 1 |
| 02***13 | Screw | 3 |
U4-3-3 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 12 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
U4-6-1 Air Charge Cooler, Hose & Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U4-5-3 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 13 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U4-3-2 Radiator, Lower Sealing, Anti-Recirculation
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
| 33***86 | Mat, Seal | 1 |
U4-5-1 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 14 |
| 13***1D | Setscrew, M10x45 | 4 |
| 13***2D | Bolt, M10 X 50 | 2 |
U4-1-1 Pump, Water
| 02***86 | Seal, Rectangular Ring | 1 |
| 02***32 | Screw | 2 |
| 02***90 | Pump, Water | 1 |
U4-4-1 Radiator & Hoses
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***26 | Washer, Seal | 1 |
U4-5-2 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 12 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U4-3-1 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Setscrew, M10 X16mm | 2 |
U4-6-2 Air Charge Cooler, Hose & Pipework
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***2D | Washer, Large | 2 |
U5-1-1 Sump, Oil, & Fittings
| 02***20 | Sump, Oil | 1 |
| 02***22 | Washer, Seal | 1 |
| 02***24 | Pipe, Oil Suction | 1 |
U5-6-1 Pipes, Oil Feed
| 02***73 | Adapter, Elbow | 2 |
| 02***45 | Hose, Lubrication Oil Feed | 2 |
| 02***47 | Adapter, Tee | 1 |
U5-4-1 Filter, Oil & Cooler
| 02***16 | Plug, Pipe | 1 |
| 02***32 | Plunger, Pressure Regulator | 1 |
| 02***33 | Spring, Oil Relief Valve | 1 |
U5-2-1 Pump, Oil
| 02***91 | Pump, Oil, Assembly | 1 |
| 02***32 | Screw | 4 |
| 02***77 | Pump, Lubricating Oil | 1 |
U6-1-1 Pump, Fuel Injection
| 02***21 | Seal, Rectangular Ring | 1 |
| 02***20 | Nut | 4 |
| 02***14 | Stud | 4 |
U6-8-1 Pump, Fuel Lift
| 02***12 | Washer, Sealing | 1 |
| 02***02 | Screw, M8 X 20mm | 4 |
| 02***39 | Adapter, Firtree Coupling | 1 |
U6-7-1 Filter, Fuel
| 02***96 | Plug | 2 |
| 02***27 | Bolt, M8x35 | 2 |
| 02***41 | O Ring | 1 |
U6-5-1 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 1 |
| 02***12 | Washer, Sealing | 3 |
| 02***20 | Pipe, Fuel Feed | 1 |
U6-6-2 Filter, Fuel Sediment
| 32***01 | Element, Fuel Filter | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
U6-2-1 Injectors, Fuel, & Injection Pipes
| 02***46 | Plate, Clamping | 3 |
| 02***47 | Plate, Clamping | 4 |
| 02***48 | Plate, Clamping | 1 |
U6-1-2 Pump, Fuel Injection, Service Parts
| 17***08 | Ring, Flat Seal | 4 |
| 17***12 | Valve, Control | 1 |
| 17***14 | Plug | 1 |
U6-6-1 Filter, Fuel Sediment
| 32***01 | Element, Fuel Filter | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
U6-4-1 Fuel System, Leak-Off Pipework
| 02***25 | Bolt, Banjo | 1 |
| 02***14 | Washer, Sealing | 3 |
| 02***92 | Valve, Check | 1 |
U6-5-3 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 2 |
| 02***12 | Washer, Sealing | 5 |
| 02***20 | Pipe, Fuel Feed | 1 |
U6-5-2 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 1 |
| 02***12 | Washer, Sealing | 3 |
| 02***20 | Pipe, Fuel Feed | 1 |
U6-3-1 Fuel Filter Pipework
| 02***25 | Bolt, Banjo | 3 |
| 02***12 | Washer, Sealing | 8 |
| 02***05 | Hose | 1 |
U7-3-1 Compressor
| 15***97 | Kit-Connecting Rod | 1 |
| 15***98 | Kit-Piston | 1 |
| 15***99 | Kit-Piston Ring | 1 |
U7-2-1 Turbo, Pipework
| 02***47 | Adapter | 2 |
| 02***68 | Hose | 1 |
| 02***59 | Gasket | 1 |
U7-5-1 Compressor, & Installation, Air Conditioning
| 12***35 | Belt, Compressor Drive | 1 |
| 13***3D | Nut, Self Lock M10 | 5 |
| 13***9D | Capscrew, M10x35 | 5 |
U7-1-1 Turbocharger
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***59 | Gasket | 1 |
| 02***36 | Nut | 4 |
U7-4-1 Compressor Pipework
| 02***71 | Adapter, Reducing | 1 |
| 02***83 | Clip, Jubilee | 4 |
| 02***84 | Adapter, Elbow, 3/8"Nptf | 1 |
U7-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
U8-2-1 Gasket Sets, Bottom Overhaul
| 02***79 | Kit-Gasket Bottom | 1 |
U8-1-1 Gasket Set, Top Overhaul
| 02***78 | Kit-Top Gasket | 1 |
U11-8-2 Engine Mountings
| 13***2D | Bolt, M12x50 | 2 |
| 13***3D | Nut, M12 | 2 |
| 13***8D | Capscrew, M12 X 30 | 6 |
U11-6-1 Timing Case, Camshaft & Gears
| 02***43 | Seal | 1 |
| 02***49 | Gasket, Gear Housing | 1 |
| 02***54 | Retainer, Belt | 1 |
U11-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***69 | Plate, Cover | 1 |
U11-5-1 Fans, Pulleys, & Fan Belt
| 01***25 | Adapter, Fan Drive | 1 |
| 02***44 | Pulley, Accessory Drive | 1 |
| 02***03 | Bolt | 4 |
U11-3-1 Block Assembly
| 02***06 | Plug, Expansion, D=58mm | 5 |
| 02***07 | Plug, Expansion, D=26mm | 4 |
| 02***08 | Plug, Expansion, 17.73mm | 4 |
U11-1-1 Engine, Complete
| 01***19 | Engine, Complete, 173bhp | 1 |
U11-8-1 Engine Mountings
| 13***1D | Bolt, M12 X 110, 10.9 | 2 |
| 13***3D | Nut, M12 | 2 |
| 13***8D | Capscrew, M12 X 30 | 6 |
U11-6-2 Timing Case, Auxiliary Drive
| 02***61 | Plate, Cover | 1 |
| 02***33 | Spacer | 1 |
| 02***35 | Gear, Auxiliary Drive | 1 |
U11-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***37 | Sleeve, Wear | 1 |
| 02***38 | Sleeve, Wear | 1 |
| 02***39 | Dowel, Pin | 1 |
U12-4-1 Lifting Plates, Engine
| 02***93 | Bracket, Lifting | 1 |
| 02***77 | Bracket, Lifting | 1 |
| 02***27 | Bolt, M8x35 | 1 |
U12-3-1 Rocker Cover
| 02***53 | Bush | 6 |
| 02***55 | Cover, Rocker | 6 |
| 02***56 | Gasket, Rocker Cover | 6 |
U12-2-1 Rocker Assembly, Push Rods & Tappets
| 02***76 | Lever, Rocker, Inlet | 6 |
| 02***77 | Lever, Rocker, Exhaust | 6 |
| 02***82 | Plug, Expansion | 2 |
U12-1-1 Cylinder Head
| 02***15 | Plug, Pipe, 1/2"Npt | 5 |
| 02***16 | Plug, Pipe | 3 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
U13-2-1 Manifold, Exhaust
| 02***12 | Manifold, Exhaust | 1 |
| 02***52 | Gasket | 6 |
| 02***37 | Bolt | 11 |
U13-3-2 Filter, Air
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
U13-4-1 Exhaust System
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***1D | Setscrew, M8 X 12mm | 6 |
U13-3-1 Filter, Air
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***3D | Nut, Self Lock M8 | 1 |
U13-1-1 Manifold, Induction, & Engine Heater
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***78 | Manifold, Induction | 1 |
U14-3-2 Radiator, Lower Sealing, Anti-Recirculation
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
| 33***86 | Mat, Seal | 1 |
U14-2-1 Thermostat & Housing
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***95 | Thermostat | 1 |
| 02***96 | Gasket, Thermostat Housing | 1 |
U14-4-1 Radiator & Hoses
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***26 | Washer, Seal | 1 |
U14-6-1 Air Charge Cooler, Hose & Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U14-3-1 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Setscrew, M10 X16mm | 2 |
U14-6-2 Air Charge Cooler, Hose & Pipework
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***2D | Washer, Large | 2 |
U14-5-3 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 13 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U14-5-2 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 12 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U14-1-1 Pump, Water
| 02***86 | Seal, Rectangular Ring | 1 |
| 02***90 | Pump, Water | 1 |
| 02***32 | Screw | 2 |
U14-3-4 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 12 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***3D | Setscrew, M10 X16mm | 2 |
U14-3-3 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 14 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
U14-5-1 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 14 |
| 13***1D | Setscrew, M10x45 | 4 |
| 13***2D | Bolt, M10 X 50 | 2 |
U14-5-4 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 4 |
| 13***8D | Setscrew, M8 X 30mm | 11 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U14-3-5 Radiator, Lower Sealing, Anti-Recirculation
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
| 33***21 | Mat, Rubber Sealing | 1 |
U15-1-1 Sump, Oil, & Fittings
| 02***22 | Washer, Seal | 1 |
| 02***24 | Pipe, Oil Suction | 1 |
| 02***26 | Plug, Oil Drain | 1 |
U15-4-1 Filter, Oil & Cooler
| 02***28 | Head, Filter | 1 |
| 02***29 | Adapter, Filter Connector | 1 |
| 02***32 | Plunger, Pressure Regulator | 1 |
U15-2-1 Pump, Oil
| 02***91 | Pump, Oil, Assembly | 1 |
| 02***32 | Screw | 4 |
U16-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 1 |
| 02***12 | Washer, Sealing | 3 |
| 02***20 | Pipe, Fuel Feed | 1 |
U16-4-2 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 2 |
| 02***12 | Washer, Sealing | 5 |
| 02***20 | Pipe, Fuel Feed | 1 |
U16-8-1 Pump, Fuel Lift
| 02***10 | Gasket | 1 |
| 02***07 | Bolt, M8x1.25x25 | 2 |
| 17***00 | Pump, Fuel Lift | 1 |
U16-7-1 Filter, Fuel
| 02***96 | Plug | 2 |
| 02***27 | Bolt, M8x35 | 2 |
| 02***41 | O Ring | 2 |
U16-6-1 Filter, Fuel Sediment
| 32***01 | Element, Fuel Filter | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
U16-3-1 Fuel Pipes, Injection Pump
| 02***58 | Washer, Seal | 1 |
| 02***44 | Washer, Seal | 2 |
| 02***72 | Adapter, Elbow | 1 |
U16-1-1 Pump, Fuel Injection
| 02***02 | Screw, M8 X 20mm | 1 |
| 02***17 | Nut | 3 |
| 02***21 | Nut | 1 |
U16-2-1 Injectors, Fuel, & Injection Pipes
| 02***91 | Seal | 1 |
| 02***92 | Seal | 1 |
| 02***38 | Bolt, Banjo | 6 |
U16-11-1 Pump,Fuel Injection, Service Parts
| 17***23 | Capscrew | 2 |
| 17***01 | Valve, Overflow | 1 |
| 17***02 | Ring, Seal | 3 |
U17-3-1 Compressor
| 15***97 | Kit-Connecting Rod | 1 |
| 15***98 | Kit-Piston | 1 |
| 15***99 | Kit-Piston Ring | 1 |
U17-2-1 Turbo, Pipework
| 02***46 | O Ring | 2 |
| 02***64 | Adapter, Male/Female | 2 |
| 02***65 | O Ring | 1 |
U17-1-1 Turbocharger
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***59 | Gasket | 1 |
| 02***20 | Turbocharger | 1 |
U17-5-1 Compressor, & Installation, Air Conditioning
| 13***2D | Bolt, M10 X 50 | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
| 13***7D | Capscrew, M10 | 3 |
U17-4-1 Compressor Pipework
U17-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
U18-2-1 Gasket Sets, Bottom Overhaul
| 02***29 | Kit-Gasket, Bottom Overhaul | 1 |
U18-1-1 Gasket Set, Top Overhaul
| 02***05 | Kit-Gasket, Top Overhaul | 1 |
| 02***87 | Kit-Gasket, Top Overhaul | 1 |
| 02***04 | Seal, Valve Stem | 12 |
FASTRAC 3220 serial number reference
The serial number plate is located at position X on the machine frame. The plate contains the 17-digit Vehicle Identification Number (VIN) and the serial numbers of the engine and transmission. The VIN structure varies between original and later configurations. Verify the specific VIN prefix and serial range applicability with a JCB dealer, as the source text provides example formats but does not list the complete sequential serial number ranges for the FASTRAC 3220.
| Prefix | Identifies | Notes |
|---|---|---|
| SLP FT 18 | Original VIN configuration for JCB FASTRAC 3220. Position 3 (18) identifies the 3220 or 3220 Plus model. Position 4 (FT) identifies the Fastrac machine range. Position 5 identifies the engine type. Position 6 identifies the transmission type (gearbox and axle combination). Position 7 identifies the vehicle maximum speed (e.g., A=75 km/h, B=65 km/h, D=50 km/h, E=40 km/h). Positions 8-17 are the serial number and authenticity code. | Confirmed by JCB Service Manual the OEM part reference. The 'SLP' prefix denotes Rocester-built machines. The '18' code in position 3 is specific to the the OEM part reference Plus within the Original VIN format. |
| JCB 23 8 40 | Later VIN configuration example format. Note: The source text lists '23' as the code for the OEM part reference Plus models in the 'C = Engine Type' section, but provides this specific string as a 'Later VIN Configuration' example. The source does not explicitly map '23' to the 3220 in this specific later format, nor does it provide a definitive later VIN prefix for the 3220. The source states '18 = 3220 or 3220 Plus' under the Original VIN Configuration. | Dropped as a direct 3220 identifier. The source explicitly maps '23' to the the OEM part reference Plus. While provided as an example of a 'Later VIN Configuration', it is not verified as belonging to the 3220 range in the provided text. Retained only as a structural example of the later format's layout, but flagged as unverified for the 3220. |
Frequently asked questions
What engine does the JCB Fastrac 3220 use?
The JCB Fastrac 3220 uses a 6.7-litre AGCO Power engine producing 164 kW (220 hp).
What is the operating weight of the JCB Fastrac 3220?
The operating weight of the JCB Fastrac 3220 is 7.7 tonnes, varying by configuration.
What model replaced the JCB Fastrac 3220?
The JCB Fastrac 3220 was succeeded by the Fastrac 4000 series.
What FASTRAC 3220 owners discuss
What engine powers the JCB FASTRAC 3220 and what are its common powertrain characteristics?
The JCB FASTRAC 3220 is powered by a 5.9-liter Cummins engine. Owners report it delivers significant power, with PTO output tested at 225 hp and potential for 300 hp with timing and fuel adjustments. The gearbox is described as 'built proof' and mechanically robust; however, shifting gears is considered labor-intensive compared to modern CVT transmissions. The machine is noted for its ability to pull heavy loads effectively when 4WD is locked, aided by its independent axle suspension.
What are the typical hydraulic and undercarriage wear patterns for this model?
Hydraulic flow is often cited as lacking, particularly when operating multiple hydraulic motors simultaneously, causing the system to struggle. Undercarriage wear includes rapid rusting of steel pipes inside the chassis rails. The plastic fan coupling is a known wear item, typically lasting only 1,100 to 1,500 hours; failure can lead to catastrophic damage requiring replacement of the radiator and fan assembly. Radiator header tanks are also prone to internal cracking around 6,000 hours.
What engine quirks or maintenance issues are associated with the Cummins powerplant in this series?
The compact engine bay makes routine maintenance difficult; some owners note it is quicker to remove the front wheel to change engine oil. The engine runs hot, particularly on days exceeding 35°C, which can lead to overheating of components under the bonnet and in the cab. Plastic fan coupling failure is a critical engine-related risk, as a seized fan can destroy the radiator and fan assembly.
What are the common electrical and sensor issues reported by owners?
The machine is prone to frequent and varying error codes, often linked to poor earth connections rather than component failure. The wiring harness uses yellow wires with numbers that rub off, making tracing difficult. Key electrical failure points include: unsealed connectors where wiring enters the cabin (sealed connectors are used internally, creating a mismatch), relays behind the operator's seat, and wiring rub-through under the left side of the steering column. The large Deutsch plug on the left side of the motor bay requires regular cleaning with contact cleaner to prevent code faults.
What specific safety-critical fixes are associated with the braking system on this model?
Disc brake pad calipers are known to seize, which can lead to fires. The parking brake is also prone to sticking. Have your dealer verify the condition of the brake calipers and parking brake mechanism before operation.
What should be checked when buying a used FASTRAC 3220?
Inspect the rear differential for cracks, specifically on models equipped with 3-meter axles. Check the plastic cab splits near the bonnet caused by heat exposure. Verify the condition of the air conditioning system, as the evaporator is difficult to access and the system is prone to leaks. Ensure the rear deck has adequate ballast if draft work is intended, as the machine is light on the rear. Check for rust in the chassis rail steel pipes and inspect the plastic roof for breakage around work light mounts.
How does the FASTRAC 3220 compare to other tractors in terms of comfort and handling?
The cab is large and rides well, but the turning circle is significantly larger than standard tractors. Steering is described as heavy. The driver sits midway between the axles, leading to fore-and-aft whip on uneven tracks. Link arm geometry may differ from other brands, potentially causing shock loads on PTO equipment during lifting and lowering. The view of the drawbar is limited. Cab insulation is poor, requiring aftermarket foam to reduce noise and heat.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 3220. Related factory variants of the same model family:
FASTRAC 3220
Need a specific FASTRAC 3220 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.