JCBagriculturalfastrac
Jcb FASTRAC 3170
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 3170 is a high-speed, four-wheel-drive agricultural tractor manufactured from 2004 to 2006. It belongs to the Fastrac 3000 series, positioned between the 3190 and 3200 models. The machine is powered by a Cummins 6BTAA 5.9-liter turbocharged diesel engine producing 173 hp (129 kW). Operating weight ranges from 7,700 kg (16,976 lb) depending on configuration and ballast. The Fastrac 3170 succeeded the Fastrac 3150 and was succeeded by the Fastrac 3200 series. Configurations included the standard 3170 with a 65 km/h top speed and the 3170 Plus with an 80 km/h top speed, both featuring the JCB Smoothshift or Autoshuttle transmission.
Across the Fastrac 3000 series, the primary change was the introduction of the Cummins 6BTAA engine in the OEM part reference/3220 models, replacing earlier engines in the OEM part reference line. The 3170 Plus variant introduced the electronically actuated draft control system and higher speed gearing. The machine matters in the used and parts market because its Cummins engine is widely supported, and the JCB Smoothshift transmission offers a cost-effective alternative to fully automatic systems. The 3170's robust chassis and hydraulic capacity make it a popular base for specialized agricultural equipment, ensuring continued demand for service parts and rebuild kits.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 3170 specifications
Engine
| Model | Cummins 6BTAA |
| Configuration | Turbocharged, air-to-air aftercooled, 6-cylinder, liquid-cooled diesel |
| Displacement | 5.9 L (359 cu in) |
| Bore x Stroke | 102 x 120 mm (4.016 x 4.724 in) |
| Gross Power | 173 hp (129 kW) @ 2200 rpm |
| Net Power | 155 hp (115.6 kW) |
| PTO Power (Claimed) | 145 hp (108.1 kW) |
| Max Torque | 786.1 Nm (579.7 lb-ft) @ 1300 rpm |
| Torque Rise | 40% |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 7969 kg (17,570 lb) |
Dimensions
| Transport Length | 519 cm (204.7 in) |
| Transport Width | 252 cm (99.6 in) |
| Transport Height | 314 cm (124.0 in) |
| Wheelbase | 306 cm (120.5 in) |
| Track Gauge | 201 cm (79.14 in) |
| Ground Clearance | 40 cm (16.1 in) |
| Tire Size (Front/Rear) | the OEM part reference |
Performance
| Travel Speed (Standard) | 40 km/h (24.85 mph) |
| Travel Speed (Optional) | 75 km/h (46.6 mph) |
| Travel Speed (High Speed Variant) | 80 km/h (49.7 mph) |
| Rear Lift Capacity | 6999 kg (15,431 lb) standard; 8001 kg (17,640 lb) optional |
| Front Lift Capacity | 3499 kg (7,716 lb) at ends |
Service capacities (summary)
| Fuel Tank | 350.1 L (92.5 gal) |
| Hydraulic System | 120.0 L (31.7 gal) |
| Engine Oil | 15 L (4.0 gal) |
| Cooling System | 33.0 L (8.77 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
FASTRAC 3170 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Fuel tank | 350.1 L (92.5 US gal) | Diesel Oil ASTM D975-66T Nos. 1D, 2D |
| Engine crankcase (with filter) | 15 L (4 US gal) | See Engine Oil (All Machines) at the beginning of this section |
| Engine crankcase (with filter) - the OEM part reference variants | 17.5 L (4.6 US gal) | See Engine Oil (All Machines) at the beginning of this section |
| Cooling system | 33.0 L (8.77 US gal) | JCB Four Seasons Antifreeze & Summer ASTM D3306-74 Coolant/water (See Coolant Mixtures) |
| Transmission/powertrain compartments | 11.2 L (2.96 US gal) | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system AND tank | 120.0 L (31.7 US gal) | JCB Hydraulic Fluid HP46 ISO VG46 |
| Grease | N/A | JCB HP Grease Lithium complex NLGI No. 2 consistency including extreme pressure additives |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb FASTRAC 3170 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the FASTRAC 3170 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor the JCB Four Seasons Antifreeze strength in the 8.77 L (33.0 US gal) cooling system. Analyze the 31.7 L (120 US gal) hydraulic fluid for ISO VG46 contamination. Check the Cummins 6BTAA engine oil for soot loading and fuel dilution. Inspect the fuel water separator daily to prevent injector damage. Use JCB HP46 hydraulic fluid and JCB HP Grease for all lubrication points. Track transmission oil temperature during high-load PTO operations.
Corrective & Common Repairs
Address leaks at the front axle steering swivels and rear suspension cylinder pivots. Replace worn wet clutch packs in the transmission if gear engagement becomes difficult. Repair or replace the JCB Smoothshift actuator if range changes fail. Fix air leaks in the brake system, particularly at the trailer brake couplings and air dryer. Replace the alternator belt if tension drops below specification. Inspect the Cummins 6BTAA injector nozzles for coking or poor spray patterns.
Overhaul & Rebuild Points
Rebuild the transmission at 10,000 hours or if needle roller bearings show spalling. Overhaul the Cummins 6BTAA engine if compression drops below specification or oil consumption exceeds limits. Rebuild the front and rear axle hubs if bearing play is detected. Refurbish the JCB Smoothshift gearbox if splitter clutches slip. Replace the flywheel damper if cracks are visible. Rebuild the hydraulic pump if flow rates drop below rated capacity.
Seasonal & Environment Servicing
Install cold starting aids if operating below -10°C. Use ASTM D975-66T No. 1D or 2D diesel fuel in winter. Drain the fuel water separator more frequently in humid conditions. Check the air conditioning refrigerant charge (1.56 kg HFC R134a) before summer. Inspect the radiator and intercooler for insect damage in spring. Grease the front 3-point linkage and automatic trailer coupling before winter storage.
FASTRAC 3170 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/921001 | Element, Fuel Filter | Fuel system service | Check fitment → |
| 32/925644 | Filter, Fuel Assembly | Fuel system service | Check fitment → |
| 830/11817 | Pipe, Fuel, Tank To Filter | Fuel system service | Check fitment → |
| 32/925330 | Filter, Fuel Sediment, 30 Micron | Fuel system service | Check fitment → |
| 32/926132 | Filter, Carbon, Cab Aircon | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 3170 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0100 | AMF (Air Mass Flow) High Side Driver fault; torque reduction active | Open circuit or short to battery in the AMF sensor wiring or driver circuit | Inspect AMF sensor harness for damage and check connector pins for corrosion or looseness |
| P0101 | MAF (Mass Air Flow) Sensor Fault | MAF sensor signal out of expected range or sensor failure | Check MAF sensor connections and clean or replace the sensor if signal is erratic |
| P0102 | MAF Low Voltage Fault; torque reduction active | MAF sensor low voltage signal or electrical sensor low fault | Verify MAF sensor ground and power supply; check for short to ground in wiring |
| P0103 | MAF High Voltage Fault; torque reduction active | MAF sensor high voltage signal or electrical sensor high fault | Check MAF sensor wiring for short to battery voltage and inspect sensor integrity |
| P0335 | Crankshaft Position Sensor 'A' Circuit fault; no signal | Crank sensor failure, open circuit, or damaged signal wheel | Inspect crank sensor wiring harness and connector; check sensor air gap and signal output |
| P0336 | Crank Sensor Signal Fault; torque reduction active | Crank signal overspeed fault or signal out of limits | Check crank sensor installation and signal quality; inspect for debris on sensor tip |
| P029B | Injector drift fault detection on Injector 2 | Injector 2 MDP trim exceeds calibrated threshold limit | Perform injector cut-out test to isolate Injector 2; check wiring and replace injector if faulty |
| P0321-87 | CAN bus message error for engine speed from engine ECU | Communication fault on the J1939 CAN bus network | Check J1939 diagnostic harness connections and CAN bus termination resistors |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
FASTRAC 3170 attachments & work tools
Rear Three-Point Hitch
Category III hitch with a standard lift capacity of 6999 kg (15,431 lbs) at 24 inches. An optional high-lift configuration increases capacity to 8001 kg (17,640 lbs). The system utilizes a mechanically actuated external draft control valve for the the OEM part reference/3220 series.
Front Three-Point Hitch
Category II hitch available as an optional front-mounted attachment. The front lift capacity is rated at 3499 kg (7,716 lbs) at the ends. This configuration requires specific mounting hardware and hydraulic connections distinct from the rear system.
Power Take-Off (PTO)
Rear PTO is standard independent type with the OEM part reference rpm speeds. An independent front PTO with the OEM part reference rpm speeds is available as an option. The front PTO transfer box requires 0.8 L (0.2 gal) of JCB Gear Oil HP90 API-GL-5.
Hydraulic System
Closed-center hydraulic system with a total capacity of 120.0 L (31.7 gal). Operating pressure is 210.0 bar (3,046 psi) with a total flow of 99.2 lpm (26.2 gpm). The system uses JCB Hydraulic Fluid HP46 ISO VG46. Valve configurations vary between 3 or 4 valves depending on the specific option package.
Deck-Mounted Equipment
Approved by JCB Landpower for deck-mounted equipment up to 2000 liters capacity and 24 m boom length. All deck-mounted equipment fitted to other JCB Fastracs fits this machine with minimum modification. Hydraulic kit requirements depend on the specific implement flow and pressure needs.
Cab and Environmental Options
Cab includes air conditioning with 1.56 kg (3 lb 7 oz) of HFC R134a refrigerant. The cabin is equipped with an ISO Bus interface for implement control. Optional dual caliper brakes are available alongside the standard disc ABS system.
All FASTRAC 3170 assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 3170. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-6-1 Front Lower Links, Cat 3
A3-20-1 Swinging Drawbar, Without Piton, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
A3-19-1 Drawbar
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-16-2 Rear Lower Links, Cat 3, 85/90mm Lift Rams
| 33***54 | Link, Lower, Left Hand Cat.3 | 1 |
| 33***55 | Link, Lower, Right Hand Cat.3 | 1 |
| 47***39 | Kit-Hook End | 1 |
A3-16-1 Rear Lower Links, Cat 3, 80mm Lift Rams
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***39 | Kit-Hook End | 1 |
A3-23-2 Roller Drawbar, Heavy Duty
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-1-4 Weight Tray Assembly, Front, No Hitch
| 13***2D | Bolt, M16x50 | 4 |
| 13***6D | Bolt, M20 X 160 | 2 |
| 13***3D | Nut, M16 | 4 |
A3-13-2 Top Link Assembly, Eye End, 80mm/85mm/90mm Lift Rams
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
| 33***57 | Rod, Adjusting | 1 |
A3-22-1 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-15-2 Stabiliser, Heavy Duty
| 33***97 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-1-2 Weight Tray Assembly, Front, With Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 33***57 | Link, Top | 1 |
A3-14-1 Lift Rod Assembly, Standard
| 47***07 | Nipple, Grease | 2 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-20-2 Swinging Drawbar, With Piton, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-11-1 Hitch, Rear, Linkage, 80mm Lift Rams
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***0Z | Bolt, M20 X 100mm | 1 |
| 13***1Z | Bolt | 2 |
A3-22-5 Trailer Coupling, Scharmuller D3
| 33***34 | Coupling, Trailer, D3 - 50mm Pin | 1 |
| 33***16 | Pin, Locking | 1 |
| 33***39 | Pin, Locking | 2 |
A3-5-1 Top Link, Front
| 33***57 | Link, Top | 1 |
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
A3-11-2 Hitch, Rear, Linkage, 85mm/90mm Lift Rams
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***1Z | Bolt | 2 |
A3-21-1 Ladder Hitch, Assembly, Rockinger
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-3-1 Front Din 3 Plate, & Tow Point
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***9D | Bolt, M12x35 | 10 |
| 13***0D | Bolt, M12 X 40 | 10 |
A3-30-1 Rear Deck
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***2D | Setscrew, M16 X 50mm | 4 |
| 13***3D | Nut, M16 | 5 |
A3-4-1 Front Towing Point
A3-2-2 Hitch Angle Sensor
| 13***3D | Screw, M5x16 | 1 |
| 13***3D | Setscrew | 1 |
| 13***0D | Setscrew | 2 |
A3-1-1 Weight Tray Assembly, Front, No Hitch
| 13***2D | Bolt, M16x50 | 4 |
| 13***6D | Bolt, M20 X 160 | 2 |
| 13***3D | Nut, M16 | 4 |
A3-1-5 Weight Carrier, Front Single, Direct Mounting
| 13***8D | Setscrew, M12 X 30 | 4 |
| 13***5D | Bolt, M10x65 | 8 |
| 13***5D | Bolt, M16x150, Dacromet | 2 |
A3-1-3 Weight, Linkage Mounted, 900kg/1500kg
| 13***2D | Bolt | 1 |
| 13***9D | Bolt, M20 X 90, Dacromet | 4 |
| 13***0D | Bolt, M20 X 100 | 2 |
A3-10-1 Hitch, Rear
| 13***5D | Setscrew, M8x20 | 2 |
| 13***9D | Bolt, M10 X 35mm Long | 4 |
| 13***6D | Bolt, M20 X 70mm | 6 |
A3-23-1 Roller Drawbar, Heavy Duty, Australian & New Zealand Builds
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-15-1 Stabiliser, Standard Compression
| 33***96 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-15-3 Stabiliser, Automatic
| 47***00 | Stabiliser, Automatic, Assembly | 1 |
| 47***83 | Housing, Recoil | 1 |
| 47***84 | Latch | 1 |
A3-20-3 Swinging Drawbar, Without Piton, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
A3-12-1 Pickup Hitch
| 14***0Z | Washer, Plain | 4 |
| 14***2Z | Washer | 2 |
| 33***66 | Retainer, Hook Keeper | 1 |
A3-22-3 Trailer Coupling, Ladder Hitch, 38mm, Rockinger 840ra
| 47***15 | Nipple, Grease - Drive In | 2 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-2-3 Hitch Front, Top Link Storage
| 13***3D | Nut, M16 | 2 |
| 14***1D | Washer, M16 | 4 |
| 82***28 | Pin, Lynch | 2 |
A3-18-1 Towing Hook
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***91 | Pin, Retaining | 1 |
A3-20-4 Swinging Drawbar, With Piton, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-30-2 Rear Deck, Weight Carrier
| 13***5D | Screw, M12 X 20mm Long | 2 |
| 13***0D | Bolt | 2 |
| 13***9D | Bolt, M16x90 | 8 |
A3-14-2 Lift Rod Assembly, Heavy Duty
| 33***56 | Rod, Lift, Assembly | 2 |
| 47***07 | Nipple, Grease | 3 |
| 47***03 | Shaft | 1 |
A3-22-2 Trailer Coupling, Ladder Hitch, 30mm, Rockinger 850rb
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-3-2 Front Din Plate, Weight Carrier, Single
| 48***72 | Pin, Lynch | 3 |
| 48***04 | Pin, Spiral | 4 |
| 48***05 | Pin, Locking | 2 |
A3-2-1 Hitch Assembly, Front
| 13***7D | Setscrew, M12 X 25 | 4 |
| 13***8D | Bolt, M20 X 80mm | 10 |
| 13***9D | Bolt, M20 X 90, Dacromet | 4 |
A3-22-4 Trailer Coupling, Ladder Hitch, 38mm, Rockinger 860d
| 33***21 | Coupling, Trailer Towing, Rockinger 860d01 | 1 |
| 33***34 | Kit-Lever | 1 |
| 33***35 | Kit-Spring | 1 |
A3-13-1 Top Link Assembly, Hook End, 80mm/85mm/90mm Lift Rams
| 33***04 | Link, Top Assembly, Cat 3 Hook End | 1 |
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
B Bodywork, Cab, Loader End
B1-3-1 Tank, Diesel Fuel
| 13***5D | Screw, M5x20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***0D | Bolt | 1 |
B1-7-2 Fender Extensions, Rear, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
B1-1-11 Chassis & Fitments, Extended Wheelbase, Conversions 750mm
| 13***3Z | Nut, M20 | 12 |
| 13***18 | Capscrew | 12 |
| 14***2Z | Washer, M20 | 24 |
B1-1-2 Chassis & Fittings
| 13***9D | Screw, M12x35mm Long | 8 |
| 13***6D | Bolt | 6 |
| 13***8D | Bolt | 4 |
B1-1-10 Rear Crossmember, Utility
| 13***6D | Bolt, M20 X 70mm | 10 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 10 |
| 14***2D | Washer, Plain | 20 |
B1-8-1 Mountings, Front & Rear Lights
| 13***7D | Setscrew, M8x25 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***0D | Setscrew, M10 X 40mm | 4 |
B1-7-1 Fenders, Rear
| 13***0D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***8D | Setscrew, M10 X 30 | 8 |
B1-6-4 Fenders, Front, Abs
| 13***3Z | Screw, M6x16 | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
B1-8-2 Mountings, Front & Rear Lights
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***9D | Screw, M12x35mm Long | 6 |
| 13***3D | Nut, Self Lock M10 | 4 |
B1-4-2 Step, Cab Access, Right Hand
| 13***8D | Setscrew, M10 X 30 | 8 |
| 13***3D | Nut, Self Lock M10 | 14 |
| 33***00 | Step, Metal Tread | 3 |
B1-6-1 Fenders, Front
| 13***3Z | Screw, M6x16 | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
B1-1-12 Chassis & Fitments, Extended Wheelbase, Conversions 1450mm
| 13***3Z | Nut, M20 | 16 |
| 13***22 | Capscrew, Socket Head, M20 X 120 | 16 |
| 14***2Z | Washer, M20 | 32 |
B1-1-1 Chassis & Fittings
| 13***5Z | Bolt | 8 |
| 13***6Z | Bolt, M16 X 70mm | 6 |
| 13***8Z | Bolt, M16 X 80 | 4 |
B1-1-3 Chassis & Fittings
| 13***6D | Bolt | 12 |
| 13***3D | Nut, M16 | 12 |
| 14***1D | Washer, M16 | 12 |
B1-6-3 Fender Extensions, Front, Optional
| 13***7Z | Screw, M6 X 25mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
B1-4-1 Pannier Unit, Left Hand
| 13***7D | Setscrew, M8x25 | 0 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 0 |
B1-5-1 Bonnet & Fittings
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-4-3 Toolbox
| 12***71 | Padlock | 1 |
| 12***55 | Handle | 1 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B1-5-2 Bonnet & Fittings
| 13***8D | Bolt, M6 X 30 | 7 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-2-1 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***3D | Nut, Self Lock M10 | 4 |
B1-7-3 Fender Extensions, Rear Abs, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
B1-10-1 Quiet Build Kit
| 13***5D | Setscrew, M6 X 20mm Long | 12 |
| 13***3D | Nut, M6 Lock | 4 |
| 14***1D | Washer, Large | 4 |
B2-11-2 Seat, Suspension, Standard
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-1-1 Cab Assembly
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-7-1 Cab, Console, Instrument Panel, Covers & Brackets
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-11-6 Seat Suspension Unit, Standard, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-11-4 Seat Suspension Unit, Standard, Top
| 40***05 | Kit-Lever Locking | 1 |
| 40***06 | Kit-Isolator | 1 |
| 40***07 | Kit-Handle | 1 |
B2-8-1 Outlet Ducts, Air Conditioning
| 13***5Z | Bolt | 5 |
| 14***6Z | Washer, M6 | 5 |
| 14***04 | Screw | 6 |
B2-2-1 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***24 | Glass, Door | 2 |
| 82***50 | Glazing, Front Screen | 1 |
B2-11-1 Cab Seats, Installation
| 13***7D | Setscrew, M8x25 | 10 |
| 13***9D | Setscrew, M8x35 | 4 |
| 13***1D | Nut, M8 | 2 |
B2-3-2 Door, Right Hand
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***8D | Setscrew, M10 X 30 | 2 |
B2-15-1 Light, Working, Blanking Kit
B2-3-7 Cab Door, Finishing Components
| 13***5D | Setscrew, M8x20 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 2 |
B2-3-6 Door, Left Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***9D | Setscrew, M8x35 | 2 |
B2-1-3 Cab Assembly
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-11-7 Seat Suspension Unit, High-Spec, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-9-1 Soundproofing, Cab
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 24***02 | Grommet | 1 |
| 24***03 | Grommet | 1 |
B2-14-1 Visor, Sun
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 33***34 | Blind, Sunvisor, Roller Type | 1 |
B2-12-1 Seat, Passenger
| 40***14 | Washer | 2 |
| 40***86 | Kit-Headrest, Dynamic Yellow | 1 |
| 40***10 | Screw | 7 |
B2-2-2 Windscreen, Heated
| 82***54 | Windscreen, Heated | 1 |
B2-8-3 Filter, Air Conditioning
| 32***47 | Filter, Foam Pre-Cleaner | 1 |
| 32***32 | Filter, Carbon, Cab Aircon | 1 |
| 33***46 | Tray, Repair | 1 |
B2-6-1 Ducts, Mouldings, Floormat & Covers, Standard Builds
| 13***3D | Setscrew | 27 |
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***5D | Setscrew, M8x20 | 8 |
B2-1-4 Cab Assembly, Utility (Orange)
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-11-19 Seat Suspension, Kit Wear Parts, High Spec
| 40***14 | Washer | 1 |
| 40***49 | Roller | 1 |
| 40***51 | Screw | 1 |
B2-8-2 Filter, Air Conditioning
| 13***1Z | Nut, M5-8 | 2 |
| 14***1D | Washer, Large | 2 |
| 32***66 | Filter, Carbon, Cab Aircon | 1 |
B2-10-1 Soundproofing, Cab Base
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 44 |
| 33***76 | Panel, Insulation, Bulkhead Top | 1 |
B2-9-2 Soundproofing, Cab Roof
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 14***1D | Washer, Large | 5 |
| 14***3Z | Screw, Self-Tapper | 4 |
B2-4-1 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 7 |
B2-2-3 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***43 | Adhesive, & Sealant, 310ml Cartridge | 0 |
B2-11-15 Seat Suspension Unit, High-Spec, Top, Heated
| 40***07 | Kit-Handle | 1 |
| 40***08 | Guide | 1 |
| 40***09 | Handle | 1 |
B2-5-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
B2-11-13 Seat, Suspension, High-Spec, Heated
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-13-1 Seat Belt
| 13***6D | Setscrew, 7/16unf | 4 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
B2-1-5 Cab Assembly
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-11-17 Seat Suspension Unit, High-Spec, Bottom, Heated
| 40***14 | Washer | 2 |
| 40***22 | Bracket | 1 |
| 40***23 | Kit-Cable Connecting | 1 |
B2-11-3 Seat, Suspension, High-Spec
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-11-5 Seat Suspension Unit, High-Spec, Top
| 40***03 | Kit-Level Control | 1 |
| 40***04 | Kit-Upper Suspension | 1 |
| 40***05 | Kit-Lever Locking | 1 |
B2-3-3 Mirrors, External, Standard
| 15***64 | Mirror, Glass,Raydyot | 1 |
| 15***65 | Kit-Mirror Fixing, Raydyot | 1 |
| 47***00 | Mirror, Standard | 2 |
B2-3-1 Door, Left Hand
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***8D | Setscrew, M10 X 30 | 2 |
B2-1-2 Cab Assembly, Utility (Orange)
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-6-2 Ducts, Mouldings, Floormat & Covers, Plus Builds
| 13***3D | Setscrew | 23 |
| 13***5D | Setscrew, M6 X 20mm Long | 15 |
| 13***5D | Setscrew, M8x20 | 11 |
B2-3-4 Mirrors, External, Electric, Heated & Adjustable
| 33***03 | Mirror, Heated 12volt, Left Hand Assembly | 1 |
| 33***06 | Mirror, Heated 12volt, Right Hand Assembly | 1 |
B2-1-6 Cab Assembly, Utility (Orange)
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Bolt, M20 X 110 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
B2-3-5 Door, Right Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***9D | Setscrew, M8x35 | 2 |
B2-4-2 Window, Rear, Heated
| 82***86 | Window, Rear Heated | 1 |
B2-9-3 Grommets & Fillers, Cab Frame
| 24***02 | Grommet | 1 |
| 24***03 | Grommet | 1 |
| 24***05 | Grommet | 1 |
B5-2-1 Decals, Internal, Standard Build
| 33***53 | Label, Hitch Release | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-10-1 Lubricants & Filters
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
| 32***35 | Element, Main Air Filter | 1 |
B5-9-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-1-1 Decals, External, 3190
| 13***3D | Nut, M6 Lock | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 81***50 | Label, Transmission Filler | 1 |
B5-10-2 Lubricants & Filters
| 02***70 | Element, Oil Filter, Canister Type | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
B5-2-2 Decals, Internal, Plus Build
| 33***53 | Label, Hitch Release | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-1-3 Decals, External, 3170
| 13***3D | Nut, M6 Lock | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 81***50 | Label, Transmission Filler | 1 |
B5-1-2 Decals, External, 3220
| 13***3D | Nut, M6 Lock | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 81***50 | Label, Transmission Filler | 1 |
B5-4-1 Decals, North American, Homologation
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
| 81***80 | Plate, Warning, Lift Control | 1 |
B5-1-0 Identification, Serial Plates
C Electrics-Machine, Cab & Engine
C1-4-2 Light, Head, Right Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***55 | Light, Head Assembly, Right Hand Dip | 2 |
C1-10-1 Radar Installation
| 13***3Z | Bolt | 4 |
| 13***28 | Bolt, M20 X 180 (10.9) | 2 |
| 13***3Z | Nut, Self Lock | 2 |
C1-5-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C1-3-13 Harnesses, Italian Build
| 71***00 | Harness, Auxiliary, Number Plate Lamp | 1 |
| 72***12 | Harness, Chassis, 750mm Extension | 1 |
| 72***64 | Harness, Abs Chassis, 750 Extension | 1 |
C1-3-1 Harnesses, Chassis, Standard Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 150 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
C1-3-7 Harnesses, Chassis, Mechanical Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 150 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
C1-3-8 Harnesses, Cab, Mechanical Build
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 20 |
| 24***03 | Grommet | 5 |
| 26***03 | Clip, Mounting | 2 |
C1-3-5 Harnesses, Edc Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***2Z | Nut, Thin M20 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-9-1 Horn, Single Tone
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***8D | Washer, M10 | 2 |
| 26***01 | Clip, Connector | 1 |
C1-3-12 Harness Connectors, Repair Ip67 Standard
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C1-7-1 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-1-1 Battery & Fittings, Standard
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***2D | Bolt, M12 X 50mm Long | 1 |
| 13***1D | Nut, M8 | 8 |
C1-3-11 Harness Connectors, Sumitomo
| 72***16 | Terminal, Crimp | 2 |
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
C1-3-10 Harness, Non Abs, Sealing Parts
| 72***08 | Connector, Weatherpack Cavity, Seal, Green Packard | 9 |
| 72***54 | Housing, 2 Way Metripack, 150 Fm(Pin) | 1 |
| 72***09 | Housing, 3 Way Receptical, Packard | 1 |
C1-6-1 Light, Rear Fog
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-10-4 Radar Installation, Alternative
| 13***3D | Setscrew | 3 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 14***7Z | Washer, Shakeproof | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-3-4 Harnesses, Cab, Plus Build
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 20 |
| 24***03 | Grommet | 5 |
| 26***03 | Clip, Mounting | 2 |
C1-3-2 Harnesses, Chassis, Plus Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 150 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
C1-10-3 Ground Radar, Installation, Alternative
| 13***3D | Setscrew | 3 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-4-3 Light, Working, Auxiliary, Front Light Bar
| 70***89 | Light, Oval Working, Right Hand | 1 |
| 70***90 | Light, Oval Working, Left Hand | 1 |
| 70***07 | Reflector Lens, Near Range | 1 |
C1-10-2 Radar Installation
| 13***3Z | Bolt | 4 |
| 13***28 | Bolt, M20 X 180 (10.9) | 2 |
| 13***3Z | Nut, Self Lock | 2 |
C1-4-1 Light, Head, Left Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
| 70***54 | Light, Head Assembly, Left Hand Dip | 2 |
C1-3-6 Harnesses, Auxiliary Worklights
| 72***91 | Harness, Auxiliary Worklights, 8 Front - 6 Rear | 1 |
| 72***93 | Harness, Auxiliary Worklights, 6 Front - 6 Rear | 1 |
| 72***94 | Harness, Auxiliary Worklights, 4 Front - 4 Rear | 1 |
C1-1-2 Battery & Fittings, Plus Builds
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***2D | Bolt, M12 X 50mm Long | 1 |
C1-3-3 Harnesses, Cab, Standard Build
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 20 |
| 24***03 | Grommet | 5 |
| 26***03 | Clip, Mounting | 2 |
C1-2-1 Electrical Equipment
| 14***11 | Seal, Bonded | 1 |
| 32***30 | Indicator, Assembly | 1 |
| 33***52 | Boot, Warning Buzzer | 1 |
C2-13-1 Motor, Starter, 12.Volt
| 71***76 | Motor, Starter | 1 |
C2-3-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-3-2 Motor, Starter, 12.Volt
| 71***76 | Motor, Starter | 1 |
C2-2-3 Circuit, Induction Heater
| 13***3D | Screw, M5x16 | 4 |
| 13***3D | Setscrew | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
C2-2-2 Circuit, Induction Heater
| 13***3D | Screw, M5x16 | 4 |
| 13***5D | Screw, M5x20 | 4 |
| 13***3D | Setscrew | 5 |
C2-1-1 Electrical Equipment
| 02***02 | Screw, M8 X 20mm | 3 |
| 02***14 | Screw, Flange Head, 8.8 | 1 |
| 02***39 | Screw | 1 |
C2-2-1 Circuit, Induction Heater
| 13***3D | Screw, M5x16 | 4 |
| 13***3D | Setscrew | 5 |
| 13***1D | Nut, Plain M5 | 1 |
C2-11-1 Electrical Equipment
| 70***21 | Switch, Vacuum Pressure | 1 |
| 70***65 | Switch, Engine Oil Pressure | 1 |
| 71***15 | Alternator, 150amp | 1 |
C2-6-2 Engine Block Heater, 240v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-4-1 Alternator
| 33***49 | Pulley, Alternator | 1 |
| 71***32 | Capscrew, Socket Head | 4 |
| 71***15 | Alternator, 150amp | 1 |
C2-5-1 Alternator Mountings
| 02***61 | Spacer | 1 |
| 02***07 | Bolt, M8x1.25x25 | 4 |
| 02***20 | Nut | 2 |
C2-14-1 Alternator, 12.Volt
| 33***49 | Pulley, Alternator | 1 |
| 71***32 | Capscrew, Socket Head | 4 |
| 71***15 | Alternator, 150amp | 1 |
C2-15-1 Alternator Mountings
| 02***07 | Bolt, M8x1.25x25 | 3 |
| 02***19 | Screw | 1 |
| 02***22 | Screw, Flange Head, M10 X 25 | 1 |
C2-6-1 Engine Block Heater, 120v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C3-7-3 Ashtray & Lighter
| 26***90 | Ashtray | 1 |
| 33***81 | Ashtray | 1 |
| 33***81 | Plate, Ashtray Retaining | 1 |
C3-8-2 Radio, Optional
| 33***17 | Bracket, Radio Rear Support | 1 |
| 71***00 | Aerial | 1 |
| 71***00 | Cover, Radio Blanking; Replaces 69***51, For Radio See C3-11-1. Fitted Inplace Of Radio., Cover, Radio Blanking; Replaces 69***51 | 1 |
C3-9-6 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***1D | Setscrew, M8x45 | 1 |
C3-3-7 Control Panel, With Rear Hitch, Plus Builds, Australian No Spool Valves
| 24***09 | Grommet | 3 |
| 33***58 | Plate, Switch & Ashtray, Winter Pack | 1 |
| 33***39 | Plate, Switch & Ashtray, No Winter Pack | 1 |
C3-14-2 Power Supply, Auxiliary, Without Convenience Socket
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 4 |
C3-12-3 Light, Working, Auxiliary, 'A'Post
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 33***80 | Bracket, Exhaust Auxiliary-W/Light, Right Hand | 1 |
| 33***81 | Bracket, Auxiliary Worklight, Left Hand | 1 |
C3-12-6 Light, Side Indicator
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 4 |
| 24***10 | Grommet | 1 |
| 33***45 | Bracket, Mounting, Left Hand | 1 |
C3-15-1 Harnesses, Legals : Ireland 50kph
| 72***03 | Harness, Column Switch, 30kph, Harness, Column Switch, 30kph; Switch. Fit Between Main Harness And Left Hand Column | 1 |
| 72***04 | Harness, Air Ram, 30kph | 1 |
| 81***33 | Decal, 30kph | 1 |
C3-9-1 Air Conditioning, Installation, Cab
| 13***5D | Setscrew, M6 X 20mm Long | 10 |
| 30***93 | Unit, Air Conditioning, Assembly | 1 |
| 30***38 | Unit, Air Conditioning, Assembly | 1 |
C3-5-1 Fuse Box & Relays, Rear, Standard
| 13***5D | Screw, M5x20 | 4 |
| 13***1D | Screw, Set M6x12 | 2 |
| 13***1D | Nut, Plain M5 | 0 |
C3-14-4 Power Supply, Auxiliary,Plus Build, Without Convenience Socket
| 33***59 | Plate, Auxiliary Power | 1 |
| 71***00 | Socket, Beacon | 1 |
| 71***01 | Socket, 3 Pin Power | 1 |
C3-7-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 70***00 | Switch, Door Light | 2 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-11-1 Washer Kit, Windscreen
| 13***5Z | Bolt | 2 |
| 24***03 | Grommet | 2 |
| 47***03 | Grommet | 2 |
C3-1-1 Instrumentation, Front
| 24***02 | Grommet | 2 |
| 24***05 | Grommet, Blind,Hole Dia 12.7mm, Panel Thkness 2-3mm | 1 |
| 47***50 | Light, Block Assembly, Trailer Park Brake, Light, Block Assembly, Trailer Park Brake; Italian Option. For Use With 'Safim' Trailer Brake Valve | 1 |
C3-4-1 Fuse Box & Relays, Front, No Auxiliary Lights
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-13-2 Mirrors, External, Electric, Heated & Adjustable
| 33***03 | Mirror, Heated 12volt, Left Hand Assembly | 1 |
| 33***06 | Mirror, Heated 12volt, Right Hand Assembly | 1 |
| 48***83 | Actuator, Mirror | 1 |
C3-9-4 Air Conditioning, Unit Assembly
| 13***1Z | Screw, M4 X 12 | 8 |
| 13***3Z | Nut | 2 |
| 30***31 | Evaporator, Assembly | 1 |
C3-9-7 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***1D | Setscrew, M8x45 | 1 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 64***00 | Tube | 0 |
| 71***01 | Jet, Windscreen Washer | 1 |
C3-3-6 Control Panel, With Rear Hitch, Plus Builds
| 13***3D | Nut, M6 Lock | 2 |
| 24***09 | Grommet | 3 |
| 33***58 | Plate, Switch & Ashtray, Winter Pack | 1 |
C3-14-3 Power Supply, Auxiliary,Plus Build, With Convenience Socket
| 13***1Z | Nut, M5-8 | 1 |
| 33***59 | Plate, Auxiliary Power | 1 |
| 71***00 | Socket, Beacon | 1 |
C3-4-2 Fuse Box & Relays, Front, With Auxiliary Lights
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-7-4 Lights, Cab Interior, & Ag Panel
| 14***02 | Screw | 2 |
| 47***20 | Tape, Seal | 1 |
| 47***07 | Light, Ag Panel | 1 |
C3-13-1 Electrics, Heated Windscreen, & Heated/Adjustable Mirrors
| 13***1D | Nut, Plain | 10 |
| 24***07 | Grommet | 2 |
| 33***03 | Mirror, Heated 12volt, Left Hand Assembly | 1 |
C3-10-1 Wash/Wipe, Windscreen
| 13***1D | Screw, Set M6x12 | 3 |
| 13***1D | Nut, Plain | 3 |
| 13***3D | Nut, Self Lock M8 | 4 |
C3-3-3 Switch Panel, Rear Draft Control
| 33***21 | Knob, Control, Setpoint Setting | 1 |
| 33***22 | Knob, Control | 2 |
| 33***23 | Lever, Main Lift Control; Supp No Changed From 1.532.000.002. Ref, R Bryant 21/04***05.P Gamble. | 1 |
C3-9-3 Heater, Installation
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5Z | Bolt | 8 |
| 13***8D | Setscrew, M12 X 30 | 1 |
C3-12-4 Light, Number Plate
| 24***09 | Grommet | 2 |
| 33***83 | Gasket, Foam, Number Plate Light | 1 |
| 70***00 | Light, Number Plate | 2 |
C3-9-2 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***8D | Setscrew, M10 X 30 | 1 |
C3-5-2 Fuse Box & Relays, Rear, Plus Builds
| 13***5D | Screw, M5x20 | 6 |
| 13***1D | Screw, Set M6x12 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
C3-2-2 Switches, Cab Rear
| 24***09 | Grommet | 3 |
| 26***01 | Clip, Connector | 1 |
| 33***34 | Plate, Ignition Switch, Winterised | 1 |
C3-9-5 Heater Assembly
| 13***3Z | Nut | 4 |
| 30***60 | Heater, Assembly | 1 |
| 30***26 | Filter, Recirculation | 1 |
C3-3-5 Switches & Sensor, Rear Hitch Control, External
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 1 |
C3-2-1 Switches, Cab Rear
| 24***09 | Grommet | 3 |
| 26***01 | Clip, Connector | 1 |
| 33***34 | Plate, Ignition Switch, Winterised | 1 |
C3-7-2 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 47***90 | Light, Mask | 1 |
C3-3-4 Switch Panel, Front Draft Control
| 33***21 | Knob, Control, Setpoint Setting | 1 |
| 33***22 | Knob, Control | 2 |
| 33***23 | Lever, Main Lift Control; Supp No Changed From 1.532.000.002. Ref, R Bryant 21/04***05.P Gamble. | 1 |
C3-6-1 Switch, Column
| 60***3Z | Screw, Countersunk | 2 |
| 70***00 | Switch, Column Indicator | 1 |
| 70***00 | Switch, Column, Power Range Change | 1 |
C3-14-1 Power Supply, Auxiliary, With Convenience Socket
| 13***3Z | Screw, M6x16 | 3 |
| 13***5Z | Bolt | 2 |
| 13***1Z | Nut, M5-8 | 1 |
C3-3-1 Control Panel, With Rear Hitch, Standard
| 33***99 | Plate, Switch, A.G Panel | 1 |
| 47***00 | Switch; A=Front Power Take-Off, B=2/4wd, C=Rear Power Take-Off. If Front And Rear Power Take-Off Fitted, Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fited., Switch, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only., Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fitted., Switch; A=Blanked, B=2/4wd, C=Rear Power Take-Off. If Rear Power Take-Off Only, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only | 0 |
| 48***05 | Switch, 4wd Power Take-Off, Assembly | 1 |
C3-12-5 Light, Brake, High Level
| 24***13 | Grommet, 31.8 Panel Hole X 3.5 Thk | 1 |
| 33***90 | Foam, Brake Light Blanking | 1 |
| 70***88 | Light, Brake, High Level | 1 |
C3-12-2 Light, Working, Front & Rear, Cab Roof
| 24***08 | Grommet, Blind | 8 |
| 70***81 | Light, Working, Right Hand; Standard, Right Hand Front/Left Hand Rear. For 6 Front And 4 Rear Option Add 3 Units, Light, Working, Right Hand; Standard, Right Hand Front/Left Hand Rear. For 6 Front And 4 Rear Option Add 3 Units, 8 Front And 6 Rear Option Add 5 Units., Light, Working, Right Hand | 2 |
| 70***82 | Light, Working, Left Hand, Light, Working, Left Hand; Standard, Left Hand Front/Right Hand Rear. For 6 Front And 4 Rear Option Add 3 Units, 8 Front And 6 Rear Option Add 5 Units., Light, Working, Left Hand; Standard, Left Hand Front/Right Hand Rear. For 6 Front And 4 Rear Option Add 3 Units | 2 |
C3-8-1 Radio, Optional
| 71***00 | Aerial | 1 |
| 71***01 | Speaker | 2 |
| 71***02 | Grille, Speaker | 2 |
C3-3-2 Control Panel, With Rear Hitch, Plus Builds
| 24***09 | Grommet | 3 |
| 33***58 | Plate, Switch & Ashtray, Winter Pack | 1 |
| 33***60 | Plate, Vansco | 1 |
C3-12-1 Light, Head, Right Hand Dip, Auxiliary
| 24***13 | Grommet, 31.8 Panel Hole X 3.5 Thk | 2 |
| 33***03 | Bracket, Auxiliary-H/Light Mounting, Right Hand | 1 |
| 33***04 | Bracket, Auxiliary-H/Light Mounting, Left Hand | 1 |
D Controls-Machine, Engine & Steering
D1-2-3 Ram, Assembly, Pneumatic Gearchange
| 47***62 | Elbow, 1/8" X 6mm | 3 |
| 47***88 | Nut | 2 |
| 47***91 | Clevis, Assembly | 2 |
D1-4-1 Controls, Brake & Clutch
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***9D | Setscrew, M8x35 | 3 |
D1-5-1 Control, Hydraulic, 3 & 4 Spool Valves
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***7D | Setscrew, M8x25 | 6 |
| 13***3D | Nut, M6 Lock | 1 |
D1-6-1 Control, Valve Flow
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***33 | Knob, Control; Same As 47***17 | 1 |
D1-2-2 Valve Assembly, Pneumatic
| 25***48 | Valve, Manifold Assembly, 4 Station | 1 |
| 47***67 | Manifold, 4 Station | 1 |
| 47***69 | Adapter, Straight Connector | 8 |
D1-2-1 Gearshift, Air Assisted, Range Change
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-8-1 Control, Pick Up Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
D1-1-10 Cable Gearshift
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***1D | Screw, Set M6x12 | 6 |
| 13***5D | Setscrew, M8x20 | 6 |
D1-1-1 Gearshift, 5 Or 6 Speed Gearbox
| 12***02 | Plate, Compression | 2 |
| 13***3Z | Screw, M6x16 | 1 |
| 13***5Z | Bolt | 6 |
D1-7-2 Control, Power Take Off, Plus Builds
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3D | Nut, M6 Lock | 7 |
| 13***3D | Nut, Locking M4 | 2 |
D1-9-1 Control, Ladder Hitch Release
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 2 |
D1-7-1 Control, Power Take Off, Standard
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3D | Nut, M6 Lock | 7 |
| 13***3D | Nut, Locking M4 | 2 |
D1-2-11 Gearshift, Air Assisted, Range Change
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-3-1 Brake, Parking
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
D2-1-1 Control, Hand Throttle
| 13***3D | Setscrew | 6 |
| 13***1D | Nut, Plain | 8 |
| 14***6D | Washer, M6 Plain | 14 |
D2-11-1 Control, Throttle
| 13***3D | Setscrew | 2 |
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 4 |
D2-2-1 Control, Throttle, Foot
| 13***5D | Setscrew, M8x20 | 4 |
| 13***0D | Bolt, M6x40 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
D3-5-2 Steering Shaft, Lower Fixed
| 13***5Z | Bolt, High Tensile | 3 |
| 13***2D | Screw, Set, M10x50 - Grade 10.9 | 1 |
| 13***3Z | Nut | 3 |
D3-5-1 Steering Shaft, Intermediate Fixed
| 13***5Z | Bolt, High Tensile | 3 |
| 13***0Z | Screw, Set, High Tensile | 1 |
| 13***3Z | Nut | 1 |
D3-4-1 Steering Shaft, Intermediate Sliding, Upper
| 13***0Z | Screw, Set, High Tensile | 2 |
| 13***3Z | Nut | 2 |
| 33***33 | Shaft, Sliding 184-242 | 1 |
D3-4-2 Steering Shaft, Intermediate Sliding, Lower
| 13***0Z | Screw, Set, High Tensile | 2 |
| 13***3Z | Nut | 2 |
| 33***34 | Shaft, Sliding 271-344 | 1 |
D3-1-1 Steering Column, Adjustable
| 13***3D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3Z | Nut, M16 | 1 |
D3-3-1 Motor, Steering
| 47***41 | Steering Drop Arm | 1 |
| 47***55 | Kit, Sector Shaft Sealing | 1 |
| 47***58 | Kit, Pitman Arm Retainer | 1 |
D3-2-1 Steering, Installation
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***8D | Bolt, M8x30mm | 3 |
| 13***3D | Nut, Self Lock M8 | 3 |
D3-1-2 Steering Column, Adjustable
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Nut, M6 Lock | 2 |
| 33***93 | Wheel, Steering, Splined Hub | 1 |
E Hydraulics & Air Including, Steering
E1-15-2 Circuit, Flow Divider, Rear, Without Trailer Brake Valve, Standard
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***04 | Nut | 1 |
E1-15-3 Circuit, Flow Divider, Rear, With Trailer Brake Valve, Plus Builds
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-6-2 Circuit, Rear Hitch, Plus Builds
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-11-1 Circuit, Auxiliary, 3rd Spool, Front
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***3D | Nut, M6 Lock | 4 |
E1-5-1 Circuit, Differential Lock
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 24***03 | O Ring | 1 |
| 24***09 | Grommet | 1 |
E1-4-1 Circuit, Steering
E1-9-1 Circuit, Auxiliary, 3/4 Spool, Rear, Standard
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 10 |
| 24***10 | O Ring | 2 |
E1-9-2 Circuit, Auxiliary, 3/4 Spool, Rear, Plus Builds
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 16 |
| 33***96 | Cap, Qrc Dust, Grey | 2 |
E1-6-1 Circuit, Rear Hitch, Standard
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-17-4 Circuit, Auxiliary Bypass, With Flow Divider
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 47***63 | Adapter, M22 X 3/8"Bsp | 1 |
| 61***02 | Hose, 3/8in. Hp | 1 |
E1-14-1 Circuit, Auxiliary, Free Flow Return, Front
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***5Z | Nut | 1 |
E1-1-2 Circuit, Neutral, Plus Builds
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-16-2 Circuit, Qrc Drain
| 13***3D | Setscrew | 2 |
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 4 |
E1-8-1 Circuit, Front Hitch Feed, Standard
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***9D | Screw, M12x35mm Long | 1 |
| 13***3D | Nut, M12 | 1 |
E1-16-1 Circuit, Qrc Drain
| 13***3D | Setscrew | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
E1-15-1 Circuit, Flow Divider, Rear, With Trailer Brake Valve, Standard
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-13-1 Circuit, Auxiliary, Free Flow Return, Rear
| 13***5Z | Nut | 1 |
| 23***11 | O Ring, 5/8"Bsp | 2 |
| 45***01 | Kit-Seal | 1 |
E1-9-3 Circuit, Auxiliary, 3/4 Spool, Rear, Standard Utility
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 12 |
| 33***96 | Cap, Qrc Dust, Grey | 2 |
E1-2-2 Circuit, Transmission
| 13***8Z | Screw, M8x30 | 1 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-9-4 Circuit, Auxiliary, 3/4 Spool, Rear, Plus Builds Utility
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 16 |
| 33***96 | Cap, Qrc Dust, Grey | 2 |
E1-12-2 Circuit, Auxiliary, 4th Spool, Front, Plus Builds
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***8D | Setscrew, M10 X 30 | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-8-2 Circuit, Front Hitch Feed, Plus Build
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***9D | Screw, M12x35mm Long | 1 |
| 13***3D | Nut, M12 | 1 |
E1-17-3 Circuit, Auxiliary Bypass, Without Flow Divider
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 47***63 | Adapter, M22 X 3/8"Bsp | 1 |
| 61***02 | Hose, 3/8in. Hp | 1 |
E1-2-3 Circuit, Cooling, Transmission
| 13***1D | Setscrew, M5 X 12mm Long | 3 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
E1-3-1 Circuit, Front & Rear Pto
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-1-1 Circuit, Neutral, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-7-1 Circuit, Front Hitch
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 1 |
| 16***03 | Adapter, Male/Female | 1 |
E1-15-4 Circuit, Flow Divider, Rear, Without Trailer Brake Valve, Plus Builds
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***04 | Nut | 1 |
E1-4-2 Circuit, Steering
| 13***7D | Setscrew, M8x25 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 3 |
| 13***9D | Setscrew, M8x35 | 3 |
E1-17-2 Circuit, Auxiliary Bypass, With Flow Divider
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***1D | Screw, Grub M10 X 6 | 1 |
| 14***11 | Seal, Bonded | 2 |
E1-12-1 Circuit, Auxiliary, 4th Spool, Front, Standard
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-2-1 Circuit, Cooling, Transmission
| 13***1D | Setscrew, M5 X 12mm Long | 3 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
E1-17-1 Circuit, Auxiliary Bypass, Without Flow Divider
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***1D | Screw, Grub M10 X 6 | 1 |
| 14***11 | Seal, Bonded | 2 |
E2-1-1 Pump, Steer & Suspension
| 20***40 | Pump, Steering/Suspension | 1 |
| 20***18 | Seal, Oil, Radial Lip | 2 |
| 20***19 | Retainer | 1 |
E2-2-1 Pump, Main/Auxiliary, Hydraulic
| 20***00 | Pump, Twin Main/Auxiliary, Hydraulic, 45cc,19cc | 1 |
| 20***23 | Coupling, Muff | 1 |
| 20***39 | Pump, Hydraulic Gear | 1 |
E3-8-1 Valve, Charge
| 25***98 | Cartridge, Solenoid | 1 |
| 25***50 | Coil, 12v, Deutsch Connector | 1 |
| 25***51 | Valve, Solenoid Assembly | 1 |
E3-10-2 Filter, Hydraulic, Tank Mounted
| 32***04 | O Ring | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
| 32***92 | Insert | 1 |
E3-6-2 Valve, Section, Endplate, Electronic
| 25***73 | Valve, Section, End Cover | 1 |
| 25***53 | Solenoid | 1 |
| 25***55 | Kit-Seal | 1 |
E3-9-1 Valve, Flow Regulator, Diverter
| 25***45 | Valve, Flow Divider | 1 |
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
E3-5-2 Valve, Section, Draft Control, Electronic, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 1 |
| 25***66 | Plug | 2 |
E3-1-6 Valve, Assembly, Electronic 3 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-7-2 Valve, Solenoid, Pressure Maintenance, Deutsch Connectors
| 13***0D | Setscrew | 4 |
| 13***2D | Capscrew, M8 X 120 Long, Grade 12.9 | 2 |
| 13***8Z | Capscrew, M5 X 30 | 0 |
E3-1-2 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-10-1 Filter, Hydraulic, Tank Mounted
| 32***04 | O Ring | 1 |
| 32***52 | Filter, Hydraulic, Assembly | 1 |
| 32***90 | Housing, Filter | 1 |
E3-1-3 Valve, Assembly, Electronic 3 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-5-1 Valve, Section, Draft Control, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 2 |
| 25***40 | Valve, Section,, Draft Control | 1 |
E3-6-3 Valve, Section, Endplate, Electronic
| 25***66 | O Ring | 1 |
| 25***69 | Filter | 1 |
| 25***74 | Kit-Repair | 1 |
E3-1-21 Valve Mountings, Mechanical Valves
| 13***8D | Screw, M8x30 | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***3D | Nut, Self Lock M10 | 2 |
E3-4-2 Valve, Section, Directional Control, Electronic, With Flow Control
| 25***48 | Plug | 1 |
| 25***52 | Spring | 1 |
| 25***54 | Plug | 2 |
E3-2-1 Valve, Section, Inlet, With Main Relief
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***45 | O Ring | 2 |
| 25***54 | Plug | 1 |
E3-2-2 Valve, Section, Inlet, Electronic, With Main Relief
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***45 | O Ring | 2 |
| 25***54 | Plug | 1 |
E3-1-4 Valve, Assembly, Electronic 4 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-4-1 Valve, Section, Directional Control, With Flow Control
| 25***38 | Valve, Section, Directional, With Flow Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-11-2 Filter, Transmission Oil
| 32***43 | Filter, Assembly, Transmission Oil | 1 |
| 32***07 | Head Filter, Transmission Oil | 1 |
| 32***08 | Bowl Filter, Transmission Oil | 1 |
E3-1-5 Valve, Assembly, Electronic 5 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-1-1 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-7-1 Valve, Solenoid, Pressure Maintenance
| 13***0Z | Bolt | 4 |
| 13***2Z | Capscrew | 2 |
| 13***8Z | Capscrew, M5 X 30 | 12 |
E3-11-1 Filter, Transmission Oil
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E3-1-8 Valve, Assembly, Electronic 5 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E3-3-2 Valve Section, Directional Control, Electronic
| 25***48 | Plug | 2 |
| 25***49 | Retainer, Spring | 1 |
| 25***53 | Washer | 1 |
E3-3-1 Valve, Section, Directional Control
| 25***39 | Valve, Section, Directional Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-1-22 Valve Mountings, Electronic Valves
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***8D | Screw, M8x30 | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
E3-9-2 Valve, Flow Regulator, Diverter
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
| 25***72 | Kit-Seal | 1 |
E3-1-7 Valve, Assembly, Electronic 4 Spool, And Adapters
| 24***01 | O Ring | 1 |
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
E4-2-1 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-1-1 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-4-1 Ram, Front Hitch
| 48***47 | Nipple, Grease | 2 |
| 48***48 | Head, Piston | 1 |
| 48***49 | Bearing, Gland | 1 |
E4-5-2 Ram, Rear Hitch, 85mm
| 47***05 | Nipple, Grease | 2 |
| 47***04 | Ring, Retaining, 85mm Ram | 1 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
E4-5-1 Ram, Rear Hitch, 80mm
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
| 47***96 | Bearing, Assembly; Cbm Would Not Supply To Jcb.But Skf P/No, Gem 45 Es-2rs. Supplier Code 00220.San 09757 | 1 |
E4-2-3 Ram,, Suspension, 'Cushioned' 50mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 1 |
| 47***62 | Ram, Suspension 50mm | 2 |
E4-2-2 Ram, Suspension, 'Cushioned', Optional 45mm Heavy Duty
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***13 | Cover, Protective Tube | 1 |
E4-5-3 Ram, Rear Hitch, 90mm
| 33***47 | Cylinder, 90mm Lift, Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
F Axles, Wheels & Transmission
F1-2-4 Hub & Components, Front Right Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-12-3 Hub & Components, Front Left Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F1-11-2 Axle Assembly, Front, 65kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-12-1 Hub & Components, Front Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-1-2 Axle Assembly, Front, 65kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-12-4 Hub & Components, Front Right Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F1-13-2 Axle, Drive Head, 65kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F1-12-2 Hub & Components, Front Right Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-1-1 Axle Assembly, Front, 80kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-3-3 Axle Drive Head, 55kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 2 |
| 45***02 | Plate, End | 1 |
F1-1-3 Axle Assembly, Front, 80kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-13-1 Axle Drive Head, 80kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F1-4-2 Differential, Components, Maxtrac
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-4-1 Differential, Components, No Spin
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F1-2-3 Hub & Components, Front Left Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-3-1 Axle Drive Head, 80kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F1-1-5 Axle Assembly, Front, 55kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-11-4 Axle Assembly, Front, 65kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-2-2 Hub & Components, Front Right Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-1-4 Axle Assembly, Front, 65kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-11-1 Axle Assembly, Front, 80kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-2-1 Hub & Components, Front Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-1-6 Axle Assembly, Front, 55kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-3-2 Axle Drive Head, 65kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F1-11-3 Axle Assembly, Front, 80kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F2-13-2 Axle Drive Head, 65kph, 16.62 : 1
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-12-1 Hub & Components, Rear, Right & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 45***01 | Carrier, Planetary Hub | 1 |
| 45***02 | Housing, Bearing | 1 |
F2-3-1 Axle Drive Head, 80kph, 12.29 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-1-6 Axle Assembly, Rear, 40kph, 19.8 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-11-2 Axle Assembly, Rear, 65kph, 16.62 : 1
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-5 Axle Assembly, Rear, 40kph, 19.8 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 8 |
F2-3-3 Axle Drive Head, 40kph, 19.8 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-2-1 Hub & Components, Rear Pd90, Right Hand & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 45***01 | Carrier, Planetary Hub | 1 |
| 45***02 | Housing, Bearing | 1 |
F2-2-2 Hub & Components, Rear, Pd90 Abs, Right Hand & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 13***1Z | Nut, Hex M20, High Strength | 32 |
| 13***5Z | Capscrew, M8x20 | 2 |
F2-13-1 Axle Drive Head, 80kph, 12.29 : 1
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-1-3 Axle Assembly, Rear, 80kph, 12.29 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-11-3 Axle Assembly, Rear, 80kph, 12.29 : 1, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-4 Axle Assembly, Rear, 65kph, 16.62 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-1 Axle Assembly, Rear, 80kph, 12.29 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-2 Axle Assembly, Rear, 65kph, 16.62 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-11-1 Axle Assembly, Rear, 80kph, 12.29 : 1
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-3-2 Axle Drive Head, 65kph, 16.62 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-12-2 Hub & Components, Rear, Abs, Right Hand & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 13***1Z | Nut, Hex M20, High Strength | 32 |
| 45***01 | Carrier, Planetary Hub | 1 |
F2-4-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-11-4 Axle Assembly, Rear, 65kph, 16.62 : 1 Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F3-2-3 Propshafts, Rear Axle, Drive, 1450mm Extended Wheelbase & 6 Wheeler
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-3-9 Wheels & Tyres, Xm27 620/75-R26, Michelen, Denmark Option
| 14***1D | Washer, M16 | 6 |
| 15***01 | Valve | 1 |
| 33***74 | Wheel, And Tyre, L.H, Xm27 62***26 | 1 |
F3-3-6 Wheels & Tyres, 540/65-R30 Pirelli, 600/65-R28 Pirelli, 65kph Australia Only
| 15***01 | Valve | 1 |
| 33***82 | Wheel, Assembly, Left Hand, Pirelli 60***28 | 1 |
| 33***85 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
F3-5-2 Wheels & Tyres, 540/65-R30, Michelin
| 13***6Z | Bolt | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-3-3 Wheels & Tyres, 520/70-R30, Pirelli
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-4-5 Wheels & Tyres, 480/70 Firestone, (74" Assy)
| 15***01 | Valve | 1 |
| 33***91 | Wheel, & Tyre Assembly, Firestone 480/70 R30 | 1 |
| 33***92 | Wheel, & Tyre Assembly, Firestone 480/70 R30 | 1 |
F3-3-4 Wheels & Tyres, 600/65-R28(76"Track), Pirelli
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 33***80 | Wheel, Assembly, Left Hand, Pirelli, 60***28 | 1 |
F3-5-1 Wheels & Tyres, 495/70-R24, Michelin
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-4-7 Wheels & Tyres, 540/65 Firestone, (80" Assy)
| 15***01 | Valve | 1 |
| 33***96 | Wheel, & Tyre Assembly, Firestone 540/65 R30 | 1 |
| 33***97 | Wheel, & Tyre Assembly, Firestone 540/65 R30 | 1 |
F3-3-8 Wheels & Tyres, 320/70-R26,Michelin
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw20a X 26 | 1 |
| 41***00 | Rim, Wheel, Dw20a X 26 | 1 |
F3-3-7 Wheels & Tyres, 540/65-R34, Continental
| 15***01 | Valve | 1 |
| 33***73 | Screw, Delimeter | 1 |
| 33***39 | Wheel, And Tyre, 54***34, Continental | 1 |
F3-3-1 Wheels & Tyres, 480/70-R30, Pirelli (1880mm Track)
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-6-2 Wheels & Tyres, 520/65-R30 Nokian
| 15***01 | Valve | 1 |
| 33***07 | Wheel, Assembly, 52***30 Nokian | 2 |
| 33***10 | Wheel, Assembly, 52***30 Nokian | 2 |
F3-9-1 Wheels & Tyres, 680/55-R26.5, Trelleborg
| 15***01 | Valve | 1 |
| 33***73 | Screw, Delimeter | 1 |
| 33***39 | Wheel, And Tyre Assembly, 680/55-R26.5 Frh | 1 |
F3-3-11 Wheels & Tyres, 540/65-R34, Pirelli
| 15***01 | Valve | 1 |
| 33***73 | Screw, Delimeter | 1 |
| 33***68 | Wheel, & Tyre Assembly, 80" (2032mm) Track | 1 |
F3-3-5 Wheels & Tyres, 480/70-R30 Pirelli, 600/65-R28 Pirelli, Australian Builds
| 15***01 | Valve | 1 |
| 33***31 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
| 33***32 | Wheel, Assembly, Left Hand, Pirelli 60***28 | 1 |
F3-6-4 Wheels & Tyres, 540/65-R30 Nokian
| 15***01 | Valve | 1 |
| 33***19 | Wheel, & Tyre Assembly, 54***30 (2015) Flh | 1 |
| 33***20 | Wheel, & Tyre Assembly, 54***30 (2015) Frh | 1 |
F3-8-1 Wheels & Tyres, 455/70-R24 Mpt Spt9, Dunlop
| 15***01 | Valve | 1 |
| 33***38 | Wheel, & Tyre Assembly, 76"(1930) Track | 2 |
| 33***92 | Wheel, & Tyre Assembly, 76"(1930) Track | 2 |
F3-1-1 Propshafts, Axle Drive, Front
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***3Z | Nut | 4 |
| 82***88 | Bolt, M10x30 | 4 |
F3-2-1 Propshafts, Axle Drive, Rear
| 82***47 | Nut, Cleveloc | 8 |
| 82***50 | Stud, Bolt | 8 |
| 82***88 | Bolt, M10x30 | 4 |
F3-7-1 Mounting, Chock
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***67 | Chock, Wheel, Size 3, Folding Type | 2 |
F3-3-2 Wheels & Tyres, 480/70-R30, Pirelli (2015mm Track)
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-4-1 Wheels & Tyres, 480/70-R30, Goodyear
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-4-6 Wheels & Tyres, 480/70 Firestone, 2015 (80")
| 15***01 | Valve | 1 |
| 33***94 | Wheel, & Tyre Assembly, Firestone 480/70 R30 | 1 |
| 33***95 | Wheel, & Tyre Assembly, Firestone 480/70 R30 | 1 |
F3-3-10 Wheels & Tyres, Xm27 620/75-R26, Xm27 750/65r26 Michelen, Denmark Option
| 14***1D | Washer, M16 | 6 |
| 15***01 | Valve | 1 |
| 33***57 | Wheel, And Tyre, L.H, Xm27 75***26 | 1 |
F3-6-1 Wheels & Tyres, 16.9-R30, Nokian
| 15***01 | Valve | 1 |
| 33***25 | Wheel, Assembly Nokian, 16.9r30 R/H 10 Stud | 2 |
| 33***26 | Wheel, Assembly, 16.9r30 12 Stud | 2 |
F3-6-3 Wheels & Tyres, 440/80-R30 Nokian
| 15***01 | Valve | 1 |
| 33***13 | Wheel, & Tyre Assembly, 44***30 (2015) Lhf | 1 |
| 33***14 | Wheel, & Tyre Assembly, 44***30 (2015) Rhf | 1 |
F3-2-2 Propshafts, Rear Axle, Fixed, 1450mm Extended Wheelbase & 6 Wheeler
| 13***2Z | Bolt, M12 X 50mm | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
F5-2-1 Transmission Gearbox, Assembly, Single Pto, 40/50/65/80kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-7 Transmission Gearbox, Assembly, Single Pto, 65kph, 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-3-3 Pipework, Powershift Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***4Z | Bolt | 2 |
F5-1-8 Transmission Gearbox, Assembly, Twin Pto, 65kph 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-6 Transmission Gearbox, Assembly, Twin Pto, 40kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-5 Transmission Gearbox, Assembly, Single Pto, 40kph, 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-6 Transmission Gearbox, Assembly, Twin Pto, 40kph 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-2 Transmission Gearbox, Assembly, Twin Pto, 40/50/65/80kph 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-1 Transmission Gearbox, Assembly, Single Pto, 40/50/65/80kph, 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-4-1 Dipstick & Filler, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***26 | Washer, Seal | 1 |
F5-3-2 Pipework, Wet Clutch Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***1Z | Nut | 2 |
F5-2-4 Transmission Gearbox, Assembly, Twin Pto, 40/50/65/80kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-4 Transmission Gearbox, Assembly, Twin Pto, 40/50/65/80kph 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-8 Transmission Gearbox, Assembly, Twin Pto, 65kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-7 Transmission Gearbox, Assembly, Single Pto, 65kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-2 Transmission Gearbox, Assembly, Twin Pto, 40/50/65/80kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-5 Transmission Gearbox, Assembly, Single Pto, 40kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-3-1 Pipework, Pto Drain
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F5-1-3 Transmission Gearbox, Assembly, Single Pto, 40/50/65/80kph, 6 Speed Stickshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-3 Transmission Gearbox, Assembly, Single Pto, 40/50/65/80kph, 6 Speed Cableshift
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F6-5-1 Shaft, Output Group, 4 Wheel Drive
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
| 44***03 | Washer, Thrust; Superseded By 82***82 | 1 |
F6-6-1 Gear Change, 40kph & 80kph, Airshift
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-1-1 Gearbox, Range, Airshift
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-2-1 Gearbox Housing
| 13***9Z | Bolt | 1 |
| 13***1Z | Bolt | 2 |
| 13***7Z | Bolt, Coated | 7 |
F6-3-2 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F6-4-1 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F6-1-2 Gearbox, Range, Airshift
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-7-1 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***07 | Shaft, Selector, Low & Reverse | 1 |
F6-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***02 | Gear, Input 40t | 1 |
F6-2-2 Gearbox Housing
| 13***9Z | Bolt | 1 |
| 13***1Z | Bolt | 2 |
| 13***7Z | Bolt, Coated | 7 |
F7-7-1 Gearbox, 6 Speed, Mainshaft Assembly
| 45***45 | Bearing, Needle Roller | 2 |
| 45***49 | Plunger | 7 |
| 45***50 | Roller, 8mm | 9 |
F7-5-1 Gearbox, 6 Speed, Front Cover Assembly
| 45***97 | Seal, Oil | 1 |
| 45***02 | Cover, Front | 1 |
| 47***76 | Screw | 5 |
F7-10-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F7-3-1 Gearbox, 6 Speed, Rear Case Assembly
| 45***12 | Bush, Selector Shaft | 1 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
| 45***46 | Housing, Seal | 1 |
F7-8-1 Gearbox, 6 Speed, Selector Controls
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***72 | Fork, Selector 1st/2nd | 1 |
F7-4-1 Gearbox, 6 Speed, Input Shaft Assembly
| 45***68 | Bearing, Roller | 1 |
| 47***62 | Shaft, Input Assembly | 1 |
| 47***65 | Spacer | 1 |
F7-9-1 Gearbox, 6 Speed, Remote Control Assy
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F7-6-1 Gearbox, 6 Speed, Layshaft Assembly
| 45***63 | Circlip, 2.12mm | 0 |
| 45***64 | Circlip, 2.07mm | 0 |
| 45***65 | Circlip, 2.02mm | 0 |
F7-1-1 Gearbox, 6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-9-2 Gearbox, 6 Speed, Remote Control Assy
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F7-2-1 Gearbox, 6 Speed, Front Case Assembly
| 45***12 | Bush, Selector Shaft | 1 |
| 45***16 | Screw, Hammer Drive | 2 |
| 45***24 | Dowel, 8.0 Dia X 16.0mm | 2 |
F8-1-2 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-3-1 Gearbox Housing, Splitter & Pto, Clutch Assemblies
| 13***9Z | Screw, M10 X 35 | 18 |
| 33***25 | Plate, Friction | 2 |
| 33***26 | Plate, Counter, Brake | 1 |
F8-4-3 Clutch Assembly, Low
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-2-1 Clutch Assembly, Power Take Off, Front
| 13***7Z | Bolt, Coated | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***33 | Washer, Bonded | 1 |
F8-10-1 Solenoid & Valves, Splitter Gearbox
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 16 |
F8-6-1 Gearbox, Splitter & Pto, Selector Mechanism
| 13***7Z | Bolt, Coated | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***10 | Screw | 2 |
F8-1-1 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***01 | Cover, End | 2 |
F8-5-1 Gear Group, Splitter & Pto, Input, Output & Intermediate
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 22***28 | Circlip | 1 |
| 22***85 | Circlip, Internal | 1 |
F8-2-2 Clutch Assembly, Power Take Off, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
F8-5-2 Gear Group, Splitter & Pto, Input, Output & Intermediate
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 22***28 | Circlip | 1 |
| 22***85 | Circlip, Internal | 1 |
F8-4-2 Clutch Assembly, Medium/High
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-9-1 Clutch Drum, Carrier & Input Gear, Assembly
| 33***85 | Plate, Bearing Cover | 1 |
| 45***24 | Carrier, Clutch & Input Gear | 1 |
| 45***11 | Gear, 27t Power Take-Off Input | 1 |
F8-8-1 Clutch Assembly, Drum, Hub, Pressure Plates
| 13***16 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 22***60 | Circlip | 1 |
F8-1-4 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-7-1 Clutch Assembly, Wet Master
| 13***9Z | Screw, M10x35mm | 15 |
| 13***3Z | Bolt, M10 X 55 | 3 |
| 13***21 | Bolt | 12 |
F8-1-3 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***01 | Cover, End | 2 |
F8-3-2 Gearbox Housing, Splitter & Pto, Clutch Assemblies
| 13***9Z | Screw, M10 X 35 | 18 |
| 33***25 | Plate, Friction | 2 |
| 33***26 | Plate, Counter, Brake | 1 |
F8-4-1 Clutch Assembly, Input
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***04 | Retainer, Spring | 1 |
F9-2-1 Gearbox, Front P.T.O Transfer
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F9-1-1 Power Take Off, Front Attachments, Twin
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***0Z | Bolt, M10 X 40 | 16 |
F9-12-2 Guard, Rear, Power Take Off, Static, French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-2-2 Gearbox, Power Take Off, Front, ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F9-1-2 Power Take Off, Front Attachments, Single
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 3 |
F9-11-1 Propshaft, Power Take Off, Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-12-1 Guard, Rear, Power Take Off
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***8Z | Bolt, M12 X 30 | 1 |
F9-10-1 Power Take Off, Rear Installation
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F9-11-2 Propshaft,, Rear Power Take Off, Extended Wheelbase Machines.
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-3-2 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
F9-3-1 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G Brakes
G1-6-1 Foot Brake, Actuator Circuit
| 13***4D | Screw | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***7Z | Bolt | 4 |
G1-32-1 Trailer Brakes, Hydraulic, Single Line (Safim)
| 13***7D | Setscrew, M8x25 | 2 |
| 13***4D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-4-11 Air Charge Circuit
| 02***17 | Olive, 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, M12 | 3 |
G1-5-1 Foot Brake Circuit
| 13***3D | Setscrew | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
G1-7-15 Trailer Circuit, Duomatic Coupling
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
G1-7-13 Trailer Circuit, Palm Couplings, Twin Line
| 33***43 | Cover, 'C' Coupling | 1 |
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
G1-18-1 Coupling 'C', Trailer Brakes
| 14***2Z | Washer, M20 | 2 |
| 33***43 | Cover, 'C' Coupling | 1 |
| 45***36 | Coupling, 'C'Male, Yellow | 1 |
G1-1-2 Brake, System, Twin Caliper, Non-Abs
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***8D | Bolt, M8x30mm | 4 |
| 13***2D | Bolt, M16x50 | 2 |
G1-7-12 Trailer Braking, Control Line Filter, Circuit
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
G1-5-2 Foot Brake Circuit
| 13***3Z | Screw, M6x16 | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt, M8x40 | 4 |
G1-30-1 Trailer Brakes, Hydraulic, Standard
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-9-1 Brakes, Trailer Air, Single Line, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
G1-14-1 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-30-2 Trailer Brakes, Hydraulic, Plus Builds
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-2-2 Brake Caliper, Front, Twin Caliper
| 15***62 | Brake, Caliper Assembly, 60mm | 1 |
| 15***19 | Kit-Brake Pad, C/W Pins & Springs | 1 |
| 47***08 | Nipple, Grease | 1 |
G1-20-1 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-9-11 Brakes, Trailer Air, Single Line, Optional
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Bolt, M6 X 25 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
G1-3-1 Brake Caliper, Rear
| 15***60 | Brake, Caliper Assembly, 60mm | 1 |
| 15***17 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***03 | Kit-Seal, Brake Caliper | 2 |
G1-2-1 Brake Caliper, Front
| 15***61 | Brake, Caliper Assembly, 75mm | 1 |
| 15***18 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***04 | Kit-Seal, Brake Caliper | 2 |
G1-6-12 Foot Brake, Actuator Circuit, Abs
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***7D | Setscrew, M12 X 25 | 1 |
| 13***7D | Bolt, M8 X 75mm Long | 6 |
G1-7-16 Trailer Circuit, Twin Coupling Head
| 13***7D | Setscrew, M8x25 | 4 |
| 13***8D | Setscrew, M10 X 30 | 3 |
| 13***3D | Nut, Self Lock M8 | 4 |
G1-1-3 Brake, System, Single Caliper, Abs
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***8Z | Bolt | 3 |
G1-6-11 Foot Brake, Actuator Circuit
| 13***4D | Screw | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***7Z | Bolt | 4 |
G1-1-4 Brake, System, Twin Caliper, Abs
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***8Z | Bolt | 3 |
G1-1-1 Brake, System, Single Caliper, Non-Abs
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***8D | Bolt, M8x30mm | 1 |
| 13***8Z | Bolt | 3 |
G1-7-1 Trailer Braking, Circuit, Twin Line Palm Coupling
| 13***3D | Setscrew | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-7-14 Trailer Circuit, 'C'Couplings, Twin Line
| 45***36 | Coupling, 'C'Male, Yellow | 1 |
| 45***37 | Coupling, 'C' Female, Red | 1 |
| 48***71 | G.A, Twin Line C Coupling, Single Line Hydrauli | 1 |
G1-19-1 Air Coupling, Duomatic
| 13***7D | Setscrew, M8x25 | 2 |
| 45***00 | Coupling, Trailer Brake, Duomatic | 1 |
| 45***01 | Kit-Repair, Duomatic Coupling | 1 |
G1-8-1 Handbrake Circuit
| 47***00 | Brake, Parking Actuator | 1 |
| 64***00 | Tube, Pvc | 0 |
| 64***00 | Pipe, Air 3/8" | 0 |
G1-8-2 Handbrake Circuit, Abs
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-7-11 Trailer Braking, Circuit
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-7-4 Trailer Braking, Circuit, Abs, Twin Line 'C' Coupling
| 13***3D | Setscrew | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-17-2 Couplings, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-17-1 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 48***86 | G.A, Palm Couplings, Circuit | 1 |
G1-13-1 Actuator, Air & Hydraulic
| 13***8D | Setscrew, M10 X 30 | 2 |
| 14***8D | Washer, M10 | 2 |
| 15***01 | Chamber, Brake | 1 |
G1-7-5 Control Line Filter, Trailer Braking, Circuit
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
G1-20-2 Valve, Trailer Control, Single Line
| 15***30 | Valve, Trailer Control | 1 |
| 15***55 | Kit-Repair, Major | 1 |
| 15***56 | Kit-Repair, Minor | 1 |
G1-21-1 Valve, Circuit Protection
| 15***75 | Valve, Circuit Protection | 1 |
G1-5-12 Foot Brake Circuit
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***11 | Seal, Bonded | 2 |
G1-11-1 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-15-1 Brake, Actuator, Parking
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
| 47***34 | Kit-Repair | 1 |
G1-16-1 Valve, Trailer Control
| 15***25 | Kit-Repair, Brake Valve | 1 |
| 92***79 | Valve, Trailer Control, Single Caliper | 1 |
G1-7-3 Trailer Braking, Circuit, Abs, Twin Line Palm Coupling
| 13***3D | Setscrew | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-5-11 Foot Brake, Supply Circuit
| 13***8D | Bolt, M6 X 30 | 8 |
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
G1-4-1 Air Charge Circuit
| 02***17 | Olive, 16mm | 1 |
| 13***1D | Setscrew, M8 X 12mm | 1 |
| 13***5D | Setscrew, M8x20 | 2 |
G1-10-1 Air Drier
| 15***84 | Drier, Air, Regenerative | 1 |
| 15***05 | Cartridge, Desiccant | 1 |
| 15***06 | Kit-Heater | 1 |
G1-16-2 Valve, Trailer Control, With Twin Caliper Brakes
| 15***25 | Kit-Repair, Brake Valve | 1 |
| 92***01 | Valve, Trailer Control, Twin Caliper | 1 |
G1-6-2 Foot Brake, Actuator Circuit, Abs
| 13***7Z | Bolt, M10x25 | 2 |
| 13***7Z | Bolt | 6 |
| 13***7Z | Bolt, M8 X75mm Long | 6 |
G1-31-1 Trailer Brake Valve, Hydraulic
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 1 |
G1-12-1 Valve, Footbrake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
| 47***00 | G.A. | 1 |
G1-7-2 Trailer Braking, Circuit, Twin Line 'C' Coupling
| 13***3D | Setscrew | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-8-11 Handbrake Circuit
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
S Suspension
S1-1-1 Suspension, Front
| 13***1D | Screw, M12x45 | 4 |
| 13***1D | Bolt, M20x45, Dacromet | 2 |
| 13***9D | Bolt | 4 |
S1-2-1 Suspension, Front, Heavy Duty
| 13***1D | Screw, M12x45 | 4 |
| 13***1D | Bolt, M20x45, Dacromet | 2 |
| 13***9D | Bolt | 4 |
S2-2-1 Suspension,Rear, Utility
S2-1-1 Suspension, Rear
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
| 13***2D | Bolt, M12 X 50mm Long | 4 |
| 13***0D | Bolt, M12x100, Dacromet | 4 |
S3-2-1 Suspension, Rear, Hydraulics, Heavy Duty
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***3Z | Bolt, M8 X 55 | 1 |
S3-1-1 Suspension, Rear, Hydraulics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M6 X 60 | 2 |
U Engine B Series Tier 2
U1-5-2 Fans, Pulleys, & Fan Belt, Mechanical
| 01***25 | Adapter, Fan Drive | 1 |
| 02***41 | Damper, Vibration | 1 |
| 02***44 | Pulley, Accessory Drive | 1 |
U1-5-1 Fans, Pulleys, & Fan Belt, Electronic
| 02***41 | Damper, Vibration | 1 |
| 02***44 | Pulley, Accessory Drive | 1 |
| 02***03 | Bolt | 4 |
U1-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***69 | Plate, Cover | 1 |
U1-6-1 Timing Case, Camshaft & Gears
| 02***43 | Seal | 1 |
| 02***49 | Gasket, Gear Housing | 1 |
| 02***54 | Retainer, Belt | 1 |
U1-1-5 Engine, Complete, Non-Certified, Australia/New Zealand Build
| 01***11 | Engine, Assembly Qsb192, Non Certified | 1 |
U1-1-6 Engine, Complete, Non-Certified, Australia/New Zealand Build
| 01***13 | Engine, Assembly Qsb220, Non Certified | 1 |
U1-3-1 Block Assembly
| 02***06 | Plug, Expansion, D=58mm | 5 |
| 02***07 | Plug, Expansion, D=26mm | 4 |
| 02***08 | Plug, Expansion, 17.73mm | 3 |
U1-8-2 Engine Mountings
| 13***2D | Bolt, M12x50 | 2 |
| 13***3D | Nut, M12 | 2 |
| 13***8D | Capscrew, M12 X 30 | 6 |
U1-6-2 Timing Case, Auxiliary Drive
| 02***75 | O Ring | 1 |
| 02***78 | Hub | 1 |
| 02***79 | Kit-Hub & Gear, Auxiliary Drive | 1 |
U1-1-1 Engine, Complete
| 01***91 | Engine, Complete Qsb200, Assembly; This Engine Replaced By M.S.S,See S.A.N.14442, & S.A.N.14443 Or 045 Screen On Pser. | 1 |
| 01***21 | Engine, Complete Qsb200, Assembly | 1 |
| 01***10 | Engine, Assembly Qsb192, Flexibility | 1 |
U1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***1D | Bolt, M16 X 110 | 2 |
| 13***1D | Bolt, M12 X 110, 10.9 | 2 |
U1-1-3 Engine, Complete, Flexibility
| 01***10 | Engine, Assembly Qsb192, Flexibility | 1 |
U1-1-2 Engine, Complete
| 01***90 | Engine, Complete Qsb220, Assembly; This Engine Replaced By M.S.S,See S.A.N.14442, & S.A.N.14443 Or 045 Screen On Pser. | 1 |
| 01***20 | Engine, Complete Qsb220, Assembly | 1 |
U1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***39 | Dowel, Pin | 1 |
| 02***42 | Pin, Gudgeon | 6 |
| 02***43 | Circlip | 2 |
U1-1-4 Engine, Complete, Flexibility
| 01***12 | Engine, Assembly Qsb220, Flexibility | 1 |
U2-3-1 Rocker Cover
| 02***98 | Bush, Isolator | 5 |
| 02***00 | Cover, Rocker | 1 |
| 02***01 | Gasket, Rocker Cover | 1 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***21 | Nut, 3/8"-24unf, Heavy Hexagon | 12 |
| 02***89 | Valve, Crosshead | 12 |
| 02***03 | Screw, Flange Head Cap | 12 |
U2-1-1 Cylinder Head
| 02***07 | Plug, Expansion, D=26mm | 14 |
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
U2-4-1 Lifting Plates, Engine
| 02***87 | Screw | 1 |
| 02***22 | Screw, Flange Head, M10 X 25 | 3 |
| 02***11 | Bracket, Engine Lifting, Rear | 1 |
U3-4-1 Exhaust System
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***1D | Setscrew, M8 X 12mm | 6 |
U3-2-1 Manifold, Exhaust
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***36 | Nut | 4 |
| 02***78 | Stud | 4 |
U3-4-2 Exhaust System, With, Exhaust Aspirator
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
U3-3-1 Filter, Air
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***8D | Washer, M10 | 4 |
| 22***16 | Clip, Jubilee | 2 |
U3-1-1 Manifold, Induction, And Induction Heater
| 02***79 | Gasket, Induction Manifold | 1 |
| 02***00 | Heater, Engine | 1 |
| 02***75 | Cover, Induction Manifold | 1 |
U4-1-1 Pump, Water
| 02***86 | Seal, Rectangular Ring | 1 |
| 02***32 | Screw | 2 |
| 02***90 | Pump, Water | 1 |
U4-5-2 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 12 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U4-6-2 Air Charge Cooler, Hose & Pipework
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***2D | Washer, Large | 2 |
U4-3-3 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 12 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
U4-2-1 Thermostat & Housing
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***98 | Seal, Rectangular Ring | 1 |
| 02***13 | Screw | 3 |
U4-4-1 Radiator & Hoses
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***26 | Washer, Seal | 1 |
U4-3-1 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Setscrew, M10 X16mm | 2 |
U4-5-3 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 13 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U4-5-1 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 14 |
| 13***1D | Setscrew, M10x45 | 4 |
| 13***2D | Bolt, M10 X 50 | 2 |
U4-3-2 Radiator, Lower Sealing, Anti-Recirculation
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
| 33***86 | Mat, Seal | 1 |
U4-6-1 Air Charge Cooler, Hose & Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U5-2-1 Pump, Oil
| 02***91 | Pump, Oil, Assembly | 1 |
| 02***32 | Screw | 4 |
| 02***77 | Pump, Lubricating Oil | 1 |
U5-6-1 Pipes, Oil Feed
| 02***73 | Adapter, Elbow | 2 |
| 02***45 | Hose, Lubrication Oil Feed | 2 |
| 02***47 | Adapter, Tee | 1 |
U5-4-1 Filter, Oil & Cooler
| 02***16 | Plug, Pipe | 1 |
| 02***32 | Plunger, Pressure Regulator | 1 |
| 02***33 | Spring, Oil Relief Valve | 1 |
U5-1-1 Sump, Oil, & Fittings
| 02***20 | Sump, Oil | 1 |
| 02***22 | Washer, Seal | 1 |
| 02***24 | Pipe, Oil Suction | 1 |
U6-2-1 Injectors, Fuel, & Injection Pipes
| 02***46 | Plate, Clamping | 3 |
| 02***47 | Plate, Clamping | 4 |
| 02***48 | Plate, Clamping | 1 |
U6-5-1 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 1 |
| 02***12 | Washer, Sealing | 3 |
| 02***20 | Pipe, Fuel Feed | 1 |
U6-3-1 Fuel Filter Pipework
| 02***25 | Bolt, Banjo | 3 |
| 02***12 | Washer, Sealing | 8 |
| 02***05 | Hose | 1 |
U6-8-1 Pump, Fuel Lift
| 02***12 | Washer, Sealing | 1 |
| 02***02 | Screw, M8 X 20mm | 4 |
| 02***39 | Adapter, Firtree Coupling | 1 |
U6-4-1 Fuel System, Leak-Off Pipework
| 02***25 | Bolt, Banjo | 1 |
| 02***14 | Washer, Sealing | 3 |
| 02***92 | Valve, Check | 1 |
U6-1-1 Pump, Fuel Injection
| 02***21 | Seal, Rectangular Ring | 1 |
| 02***20 | Nut | 4 |
| 02***14 | Stud | 4 |
U6-6-2 Filter, Fuel Sediment
| 32***01 | Element, Fuel Filter | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
U6-1-2 Pump, Fuel Injection, Service Parts
| 17***08 | Ring, Flat Seal | 4 |
| 17***12 | Valve, Control | 1 |
| 17***14 | Plug | 1 |
U6-5-2 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 1 |
| 02***12 | Washer, Sealing | 3 |
| 02***20 | Pipe, Fuel Feed | 1 |
U6-7-1 Filter, Fuel
| 02***96 | Plug | 2 |
| 02***27 | Bolt, M8x35 | 2 |
| 02***41 | O Ring | 1 |
U6-6-1 Filter, Fuel Sediment
| 32***01 | Element, Fuel Filter | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
U6-5-3 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 2 |
| 02***12 | Washer, Sealing | 5 |
| 02***20 | Pipe, Fuel Feed | 1 |
U7-1-1 Turbocharger
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***59 | Gasket | 1 |
| 02***36 | Nut | 4 |
U7-2-1 Turbo, Pipework
| 02***47 | Adapter | 2 |
| 02***68 | Hose | 1 |
| 02***59 | Gasket | 1 |
U7-5-1 Compressor, & Installation, Air Conditioning
| 12***35 | Belt, Compressor Drive | 1 |
| 13***3D | Nut, Self Lock M10 | 5 |
| 13***9D | Capscrew, M10x35 | 5 |
U7-3-1 Compressor
| 15***97 | Kit-Connecting Rod | 1 |
| 15***98 | Kit-Piston | 1 |
| 15***99 | Kit-Piston Ring | 1 |
U7-4-1 Compressor Pipework
| 02***71 | Adapter, Reducing | 1 |
| 02***83 | Clip, Jubilee | 4 |
| 02***84 | Adapter, Elbow, 3/8"Nptf | 1 |
U7-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
U8-2-1 Gasket Sets, Bottom Overhaul
| 02***79 | Kit-Gasket Bottom | 1 |
U8-1-1 Gasket Set, Top Overhaul
| 02***78 | Kit-Top Gasket | 1 |
U11-1-1 Engine, Complete
| 01***19 | Engine, Complete, 173bhp | 1 |
U11-3-1 Block Assembly
| 02***06 | Plug, Expansion, D=58mm | 5 |
| 02***07 | Plug, Expansion, D=26mm | 4 |
| 02***08 | Plug, Expansion, 17.73mm | 4 |
U11-8-1 Engine Mountings
| 13***1D | Bolt, M12 X 110, 10.9 | 2 |
| 13***3D | Nut, M12 | 2 |
| 13***8D | Capscrew, M12 X 30 | 6 |
U11-8-2 Engine Mountings
| 13***2D | Bolt, M12x50 | 2 |
| 13***3D | Nut, M12 | 2 |
| 13***8D | Capscrew, M12 X 30 | 6 |
U11-5-1 Fans, Pulleys, & Fan Belt
| 01***25 | Adapter, Fan Drive | 1 |
| 02***44 | Pulley, Accessory Drive | 1 |
| 02***03 | Bolt | 4 |
U11-6-2 Timing Case, Auxiliary Drive
| 02***61 | Plate, Cover | 1 |
| 02***33 | Spacer | 1 |
| 02***35 | Gear, Auxiliary Drive | 1 |
U11-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***37 | Sleeve, Wear | 1 |
| 02***38 | Sleeve, Wear | 1 |
| 02***39 | Dowel, Pin | 1 |
U11-6-1 Timing Case, Camshaft & Gears
| 02***43 | Seal | 1 |
| 02***49 | Gasket, Gear Housing | 1 |
| 02***54 | Retainer, Belt | 1 |
U11-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***69 | Plate, Cover | 1 |
U12-4-1 Lifting Plates, Engine
| 02***93 | Bracket, Lifting | 1 |
| 02***77 | Bracket, Lifting | 1 |
| 02***27 | Bolt, M8x35 | 1 |
U12-2-1 Rocker Assembly, Push Rods & Tappets
| 02***76 | Lever, Rocker, Inlet | 6 |
| 02***77 | Lever, Rocker, Exhaust | 6 |
| 02***82 | Plug, Expansion | 2 |
U12-3-1 Rocker Cover
| 02***53 | Bush | 6 |
| 02***55 | Cover, Rocker | 6 |
| 02***56 | Gasket, Rocker Cover | 6 |
U12-1-1 Cylinder Head
| 02***15 | Plug, Pipe, 1/2"Npt | 5 |
| 02***16 | Plug, Pipe | 3 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
U13-1-1 Manifold, Induction, & Engine Heater
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***78 | Manifold, Induction | 1 |
U13-3-2 Filter, Air
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
U13-2-1 Manifold, Exhaust
| 02***12 | Manifold, Exhaust | 1 |
| 02***52 | Gasket | 6 |
| 02***37 | Bolt | 11 |
U13-3-1 Filter, Air
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***3D | Nut, Self Lock M8 | 1 |
U13-4-1 Exhaust System
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***1D | Setscrew, M8 X 12mm | 6 |
U14-5-1 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 14 |
| 13***1D | Setscrew, M10x45 | 4 |
| 13***2D | Bolt, M10 X 50 | 2 |
U14-5-4 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 4 |
| 13***8D | Setscrew, M8 X 30mm | 11 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U14-2-1 Thermostat & Housing
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***95 | Thermostat | 1 |
| 02***96 | Gasket, Thermostat Housing | 1 |
U14-4-1 Radiator & Hoses
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***26 | Washer, Seal | 1 |
U14-3-5 Radiator, Lower Sealing, Anti-Recirculation
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
| 33***21 | Mat, Rubber Sealing | 1 |
U14-3-2 Radiator, Lower Sealing, Anti-Recirculation
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
| 33***86 | Mat, Seal | 1 |
U14-1-1 Pump, Water
| 02***86 | Seal, Rectangular Ring | 1 |
| 02***90 | Pump, Water | 1 |
| 02***32 | Screw | 2 |
U14-6-1 Air Charge Cooler, Hose & Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U14-5-2 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 12 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U14-3-4 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 12 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***3D | Setscrew, M10 X16mm | 2 |
U14-3-3 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 14 |
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
U14-6-2 Air Charge Cooler, Hose & Pipework
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***2D | Washer, Large | 2 |
U14-5-3 Air Charge Cooler, Fittings & Mountings
| 13***5D | Setscrew, M8x20 | 12 |
| 13***8D | Setscrew, M8 X 30mm | 13 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
U14-3-1 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Setscrew, M10 X16mm | 2 |
U15-2-1 Pump, Oil
| 02***91 | Pump, Oil, Assembly | 1 |
| 02***32 | Screw | 4 |
U15-4-1 Filter, Oil & Cooler
| 02***28 | Head, Filter | 1 |
| 02***29 | Adapter, Filter Connector | 1 |
| 02***32 | Plunger, Pressure Regulator | 1 |
U15-1-1 Sump, Oil, & Fittings
| 02***22 | Washer, Seal | 1 |
| 02***24 | Pipe, Oil Suction | 1 |
| 02***26 | Plug, Oil Drain | 1 |
U16-2-1 Injectors, Fuel, & Injection Pipes
| 02***91 | Seal | 1 |
| 02***92 | Seal | 1 |
| 02***38 | Bolt, Banjo | 6 |
U16-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 1 |
| 02***12 | Washer, Sealing | 3 |
| 02***20 | Pipe, Fuel Feed | 1 |
U16-11-1 Pump,Fuel Injection, Service Parts
| 17***23 | Capscrew | 2 |
| 17***01 | Valve, Overflow | 1 |
| 17***02 | Ring, Seal | 3 |
U16-4-2 Fuel Pipes, Fuel Tank To Filter
| 02***25 | Bolt, Banjo | 2 |
| 02***12 | Washer, Sealing | 5 |
| 02***20 | Pipe, Fuel Feed | 1 |
U16-8-1 Pump, Fuel Lift
| 02***10 | Gasket | 1 |
| 02***07 | Bolt, M8x1.25x25 | 2 |
| 17***00 | Pump, Fuel Lift | 1 |
U16-3-1 Fuel Pipes, Injection Pump
| 02***58 | Washer, Seal | 1 |
| 02***44 | Washer, Seal | 2 |
| 02***72 | Adapter, Elbow | 1 |
U16-1-1 Pump, Fuel Injection
| 02***02 | Screw, M8 X 20mm | 1 |
| 02***17 | Nut | 3 |
| 02***21 | Nut | 1 |
U16-6-1 Filter, Fuel Sediment
| 32***01 | Element, Fuel Filter | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
U16-7-1 Filter, Fuel
| 02***96 | Plug | 2 |
| 02***27 | Bolt, M8x35 | 2 |
| 02***41 | O Ring | 2 |
U17-2-1 Turbo, Pipework
| 02***46 | O Ring | 2 |
| 02***64 | Adapter, Male/Female | 2 |
| 02***65 | O Ring | 1 |
U17-5-1 Compressor, & Installation, Air Conditioning
| 13***2D | Bolt, M10 X 50 | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
| 13***7D | Capscrew, M10 | 3 |
U17-4-1 Compressor Pipework
U17-3-1 Compressor
| 15***97 | Kit-Connecting Rod | 1 |
| 15***98 | Kit-Piston | 1 |
| 15***99 | Kit-Piston Ring | 1 |
U17-1-1 Turbocharger
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***59 | Gasket | 1 |
| 02***20 | Turbocharger | 1 |
U17-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
U18-1-1 Gasket Set, Top Overhaul
| 02***05 | Kit-Gasket, Top Overhaul | 1 |
| 02***87 | Kit-Gasket, Top Overhaul | 1 |
| 02***04 | Seal, Valve Stem | 12 |
U18-2-1 Gasket Sets, Bottom Overhaul
| 02***29 | Kit-Gasket, Bottom Overhaul | 1 |
FASTRAC 3170 serial number reference
Locate the riveted aluminium serial number plate inside the cab. The plate displays the 17-digit Vehicle Identification Number (VIN) and the serial numbers for the engine and transmission. For the Fastrac 3170, the VIN contains the code '19' in the model designation field. Verify applicability with a JCB dealer if the serial number falls outside the documented range or if the plate is missing.
| Prefix | Identifies | Notes |
|---|---|---|
| 00643430 to 00644999 | JCB Fastrac 3170 machine serial number range covered by Parts Catalogue Manual and Service Manual (Publication No. the OEM part reference Issue 9). Applies to the standard 3170 model. | |
| SLP FT 19 | JCB 17-digit VIN/PIN identifier for the Fastrac 3170 or 3170 Plus. 'SLP' is the World Manufacturer Identifier for Rocester, UK. 'FT' denotes the Fastrac machine range. '19' in the Vehicle Descriptor Section identifies the specific model variant. |
Frequently asked questions
What engine does the JCB Fastrac 3170 use?
The JCB Fastrac 3170 uses a Cummins 6BTAA 5.9-liter (359 cu in) turbocharged, liquid-cooled diesel engine producing 173 hp (129 kW).
What is the operating weight of the JCB Fastrac 3170?
The operating weight is approximately 7,700 kg (16,976 lb), varying by configuration, ballast, and attachment package.
What model replaced the JCB Fastrac 3170?
The JCB Fastrac 3170 was succeeded by the Fastrac 3200 series, which featured updated engines and transmissions.
What FASTRAC 3170 owners discuss
What engine powers the JCB FASTRAC 3170, and how does it differ from the 3190?
The FASTRAC 3170 uses the Cummins 6BT 5.9-litre engine. The FASTRAC 3190 uses the newer Cummins QSB 5.9-litre engine. Both are 5.9-litre units but represent different engine generations within the same displacement class.
What are the common hydraulic and electrical issues reported for the FASTRAC 3170 Plus model?
The Plus models feature electric spools that are prone to frequent failure, often stopping work entirely. Replacement costs are high, leading many owners to convert to manual spools. Electrical wiring is difficult to trace because wires share colors and have numbers that rub off. Cab entry connectors are not sealed, allowing moisture ingress during washing, which triggers error codes.
What undercarriage or wear patterns are typical for this machine type?
Propshafts require regular greasing but are difficult to access. Steel pipes inside the chassis rails rust quickly. Disc brake pad calipers can seize, creating a fire risk. The plastic fan coupling has a short lifespan of 1,100 to 1,500 hours; failure can destroy the radiator and fan assembly.
How does the FASTRAC 3170 perform in field work compared to road work?
The machine is ideal for road work due to comfort and reduced driver fatigue. It is less suitable for field work due to a poor turning circle, lack of independent brakes, and limited visibility of the drawbar. It requires significant ballast on the rear deck for serious draft work, as it does not pull like conventional tractors.
What cooling system weaknesses are associated with the FASTRAC 3170?
The engine runs hot on warm days, cooking components under the bonnet and in the cab. The radiator header tanks crack open internally around 6,000 hours. The air conditioning is often ineffective in hot environments, and the cab lacks insulation, requiring aftermarket foam treatment to manage heat and noise.
What is the specific risk regarding the rear differential on 3-meter models?
The rear differential on 3-meter models is prone to cracking. Owners are advised to avoid purchasing units with this configuration if possible.
What should be checked when buying a used FASTRAC 3170?
Check the plastic fan coupling for wear and replace proactively. Inspect the radiator header tanks for internal cracks. Verify the condition of the electric spools or confirm if they have been converted to manual. Check for rust in the chassis rail steel pipes. Ensure the air conditioning system is functional, as it is a common failure point. Have your dealer verify the rear differential integrity on 3-meter models.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 3170. Related factory variants of the same model family:
FASTRAC 3170
Need a specific FASTRAC 3170 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.