JCBagriculturalfastrac
Jcb FASTRAC 3155
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 3155 is a high-speed utility tractor produced from 1998 to 2002. It is powered by a Perkins 1000-6 T4 turbocharged diesel engine with 6 cylinders, delivering 168 hp (125.3 kW) at 2400 rpm. The machine weighs 14,916 lb (6765 kg) and features a 36-speed forward and 12-speed reverse transmission. It is a 4x4 4WD model with power-assisted steering and dry disc brakes. The Fastrac 3155 succeeded the Fastrac 155 and was followed by the Fastrac 3170 in the lineup. Configurations included a cab with air conditioning and various tire options, typically the OEM part reference.
Across the Fastrac 3000 series, changes included the introduction of Dacromet corrosion-resistant fasteners on units from serial number the OEM part reference onwards and updated torque specifications for these fasteners. The Fastrac 3155 remains relevant in the used market due to its robust Perkins engine and simple mechanical systems, which are easier to service than modern electronic models. Its high-speed capability and durable chassis make it a sought-after utility tractor for farmers and contractors needing a reliable, high-horsepower machine.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 3155 specifications
Engine
| Model | Perkins 1000-6 T4 |
| Configuration | Turbocharged diesel, 6-cylinder, liquid-cooled |
| Displacement | 6.0 L (365.2 ci) |
| Bore x Stroke | 100 x 127 mm (3.937 x 5.00 in) |
| Net Power | 168 hp (125.3 kW) @ 2400 RPM |
| Torque | 602.1 Nm (444.0 lb-ft) @ 1400 RPM |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 6765 kg (14,916 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 515 cm (202.8 in) |
| Transport Width | 301 cm (118.5 in) |
| Transport Height | 315 cm (124.0 in) |
| Wheelbase | 300 cm (118.5 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
| Turning Radius (4WD) | 14.0 m (45.9 ft) |
Performance
| Travel Speeds | 50/65/80 km/h (varies by configuration/series) |
| Rear Lift Capacity | 7001 kg (15,435 lb) |
| Drawbar Pull | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 350.1 L (92.5 gal) |
| Hydraulic System | 78.7 lpm (20.8 gpm) pump flow |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
FASTRAC 3155 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 13.5 L (3.57 US gal) | JCB Premium Diesel Engine Oil API CF-4/SG or equivalent; SAE 15W-40 for general use; SAE 10W-30 for cold climates below -10°C (14°F) |
| Cooling system | 18.0 L (4.76 US gal) | JCB Coolant Concentrate or equivalent ethylene glycol-based coolant; mix 50/50 with demineralized water for protection to -37°C (-35°F) |
| Fuel tank | 350.1 L (92.5 US gal) | Diesel fuel meeting EN 590 or ASTM D975 specifications; winter grade in freezing conditions |
| Transmission (Dry Clutch) | 22.0 L (5.81 US gal) | JCB Powershift Transmission Fluid or equivalent API GL-4, SAE 80W-90 gear oil |
| Transmission (Wet Clutch) | 22.0 L (5.81 US gal) | JCB Powershift Transmission Fluid or equivalent API GL-4, SAE 80W-90 gear oil with friction modifier |
| Front Axle Differential | 10.5 L (2.77 US gal) | JCB Axle Oil or equivalent API GL-5, SAE 80W-90 gear oil |
| Rear Axle Differential | 10.5 L (2.77 US gal) | JCB Axle Oil or equivalent API GL-5, SAE 80W-90 gear oil |
| Front Axle Hub (each) | 1.5 L (0.40 US gal) | JCB Axle Oil or equivalent API GL-5, SAE 80W-90 gear oil |
| Rear Axle Hub (each) | 1.5 L (0.40 US gal) | JCB Axle Oil or equivalent API GL-5, SAE 80W-90 gear oil |
| Hydraulic System and Tank | 150.0 L (39.62 US gal) | JCB Hydraulic Oil or equivalent ISO VG 46 hydraulic fluid; multi-grade ISO VG 46/68 for wide temperature ranges |
| Grease | N/A | JCB Multipurpose Grease or equivalent lithium-complex EP2 grease; NLGI Grade 2 |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb FASTRAC 3155 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the FASTRAC 3155 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil pressure and coolant temperature daily. Check the hydraulic fluid level in the transmission reservoir every 10 hours. Inspect the fuel pre-filter sediment bowl and drain if water is present. Analyze engine oil samples annually to detect wear metals. Check the air intake system for leaks or blockages. Monitor the hydraulic return filter condition during the 2000-hour service.
Corrective & Common Repairs
Replace worn brake pads on the dry disc brakes. Repair or replace leaking hydraulic hoses and fittings. Fix fuel system air leaks by replacing O-rings on the fuel lift pump. Replace the drive belt if cracks or fraying are visible. Repair the starter motor if engagement is faulty. Replace the alternator brushes if charging voltage drops below specification.
Overhaul & Rebuild Points
Rebuild the front axle differential when oil contamination is detected or at 1000-hour intervals for strainer replacement. Overhaul the rear axle if bearing noise or oil leaks occur. Rebuild the Perkins 1000-6 engine if compression drops below specification or oil consumption exceeds limits. Recondition the transmission if gear shifting becomes difficult or oil pressure is low. Replace the clutch plates if slippage is evident.
Seasonal & Environment Servicing
Use JCB 10W/30 engine oil in temperatures from -15°C to 40°C. Switch to JCB 15W/40 oil for temperatures from -10°C to 50°C. Drain the air system tank daily in humid conditions to prevent brake corrosion. Check the battery electrolyte level and top up with distilled water. Inspect the cooling system for leaks before winter. Grease all suspension and steering pivot points regularly.
FASTRAC 3155 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 02/910150 | Element, Fuel Filter, Water Seperator | Fuel system service | Check fitment → |
| 02/910155 | Element, Fuel Filter, Cartridge | Fuel system service | Check fitment → |
| 02/202261 | Pipe, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 478/01795 | Pipe, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 32/921000 | Filter, Fuel Sediment, 30 Micron | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 3155 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0100 | Mass Air Flow (MAF) Sensor Circuit Malfunction | Faulty MAF sensor, damaged wiring harness, or connector corrosion affecting the intake air measurement signal to the Engine ECU. | Inspect the MAF sensor connector for tightness and corrosion. Check wiring continuity between the sensor and the Engine ECU. Clean or replace the MAF sensor if the signal is out of specification. |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Failed crankshaft position sensor, damaged tone ring, or open circuit in the sensor wiring preventing the Engine ECU from detecting engine speed. | Verify the crankshaft position sensor is securely mounted and the air gap is correct. Check the sensor wiring for breaks or short circuits. Replace the sensor if no signal is present during cranking. |
| P0321-87 | CAN Bus Message Error for Engine Speed from Engine ECU | Communication failure on the CAN bus network between the Engine ECU and the Fastrac Central Controller or EMS Dashboard, often due to network noise or a faulty node. | Check CAN bus termination resistors and connector integrity at the Engine ECU and Central Controller. Inspect wiring for chafing or shorting to ground/battery. Reset the network by cycling the ignition. |
| P029B | Injector Drift Fault Detection on Injector 2 | Injector 2 mechanical drift exceeding calibrated limits, faulty injector driver in the Engine ECU, or low rail pressure affecting fuel delivery accuracy. | Check rail pressure sensor readings. Perform an injector balance test or swap Injector 2 with another cylinder to see if the code follows the injector. Inspect the injector wiring harness for damage. |
| P0101 | MAF Sensor Fault (Performance/Range) | MAF sensor providing data outside the expected range for the current engine load, potentially due to contamination or a failing sensor element. | Clean the MAF sensor sensing element with appropriate cleaner. Check for air leaks downstream of the MAF sensor. If the fault persists, replace the MAF sensor. |
| P0102 | MAF Sensor Low Voltage Fault | Short to ground in the MAF sensor signal circuit, open ground in the sensor wiring, or a failed MAF sensor outputting a voltage below the minimum threshold. | Measure MAF sensor voltage at idle and wide-open throttle. Check for short circuits to ground in the signal wire. Verify the sensor ground connection is clean and tight. |
| P0103 | MAF Sensor High Voltage Fault | Short to battery voltage in the MAF sensor signal circuit, open signal wire causing pull-up voltage, or a failed MAF sensor outputting a voltage above the maximum threshold. | Check the MAF sensor signal wire for insulation damage causing a short to power. Verify the sensor reference voltage is correct. Replace the MAF sensor if the voltage remains high with the connector disconnected. |
| P0330 | Knock Sensor 1 Circuit Malfunction | Failed knock sensor, loose mounting, or damaged wiring preventing the Engine ECU from detecting engine knock events. | Check the knock sensor mounting torque and connector integrity. Inspect the wiring harness for damage. Replace the knock sensor if the circuit resistance is out of specification. |
| P0336 | Torque Reduction Crank Sensor Fault (Signal Fault) | Crankshaft position sensor signal is erratic or out of sync with the camshaft signal, causing the Engine ECU to reduce torque to protect the engine. | Inspect the crankshaft position sensor and tone ring for damage or debris. Check the sensor air gap. Verify the camshaft position sensor signal is synchronized with the crank signal. |
| P0340 | Camshaft Position Sensor Signal Out of Limits | Camshaft position sensor signal is outside the calibrated limits, possibly due to a faulty sensor, timing chain/belt issues, or wiring problems. | Check the camshaft position sensor connector and wiring. Verify engine timing is correct. Replace the camshaft position sensor if the signal is erratic or absent. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
FASTRAC 3155 attachments & work tools
Rear Hitch & Three-Point Linkage
The JCB Fastrac 3155 is equipped with a Category 3 rear three-point hitch system. The rear lift capacity is rated at 7001 kg (15,435 lbs). The hitch geometry utilizes an OEM rail size of W=329/32/25 mm for compatible attachment components.
Power Take-Off (PTO)
The tractor features a rear PTO system with selectable speeds of the OEM part reference rpm. The transmission type is designated as Hy-Drive, providing 36 forward and 12 reverse gears to manage PTO-driven implement loads.
Hydraulic System
The hydraulic system operates on an open-center circuit with a total pump flow of 78.7 lpm (20.8 gpm). The system supports 3 or 4 remote control valves for powering hydraulic work tools.
Front Coupling & Drawbar
Compatible front coupling components include coupling balls (types KB8329K, KI8329N, KT8730) and coupling plates (KuP329-0, KuP329-45). Drawbar inserts and clevises (types IN50/329-195, IN338/329-28N) are available for front-mounted tool configurations.
Stabilization & Support
Stabilizer sets (HVST 540, ASST-B) and quick-adjustable supports (KU337KK) are specified for the Fastrac 3155 to maintain stability when utilizing heavy rear or front attachments.
All FASTRAC 3155 assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 3155. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-30-2 Rear Deck, Weight Carrier
| 13***5Z | Bolt, M12x20 | 2 |
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***3Z | Bolt | 4 |
A3-23-2 Roller Drawbar, Heavy Duty
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-1-1 Weight Tray Assembly, Front, No Hitch
| 13***2Z | Bolt, M16x50m | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***1Z | Nut | 2 |
A3-20-3 Swinging Drawbar, Without Piton, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
A3-12-1 Top Link Assembly, Hook End, 80mm Lift Rams
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
| 47***05 | Handle | 1 |
A3-15-2 Stabiliser, Standard Compression
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
| 47***97 | Pin, Clevis | 1 |
A3-18-1 Towing Hook
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***91 | Pin, Retaining | 1 |
A3-30-3 Rear Deck
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***2D | Setscrew, M16 X 50mm | 4 |
A3-12-2 Top Link Assembly, Eye End, 80mm Lift Rams
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-5-1 Top Link, Front
| 47***00 | Link, Top | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-19-2 Drawbar,Assembly
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-14-1 Lift Rod Assembly, Standard
| 47***07 | Nipple, Grease | 2 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-30-1 Rear Deck
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 8 |
| 13***3Z | Nut, M16 | 8 |
| 14***1Z | Washer, M16 Plain | 8 |
A3-2-1 Hitch Assembly, Front
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***9Z | Bolt | 2 |
A3-9-1 Rear Crossmember, Utility
| 13***6Z | Bolt, M20 X 70 | 10 |
| 13***3Z | Nut, M20 | 10 |
| 14***2Z | Washer, M20 | 20 |
A3-20-4 Swinging Drawbar, With Piton, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-15-1 Stabiliser, Standard Compression
| 47***85 | Rod, Eye End | 1 |
| 47***86 | Spring | 1 |
| 47***87 | Rod, Connecting Link | 1 |
A3-6-1 Front Lower Links, Cat 3
| 47***15 | Pin, Tension | 2 |
| 47***16 | Pin, Tension | 1 |
| 47***10 | Link, Lower | 2 |
A3-10-3 Hitch, Rear, Linkage
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***1Z | Bolt | 2 |
A3-20-1 Swinging Drawbar, Without Piton, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
A3-23-1 Roller Drawbar, Heavy Duty, Australian & New Zealand Builds
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-15-3 Stabiliser, Automatic
| 47***00 | Stabiliser, Automatic, Assembly | 1 |
| 47***83 | Housing, Recoil | 1 |
| 47***84 | Latch | 1 |
A3-22-1 Trailer Coupling, Ladder Hitch, 30mm, Rockinger 850rb
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-22-2 Trailer Coupling, Ladder Hitch, 38mm, Rockinger 840ra
| 47***15 | Nipple, Grease - Drive In | 2 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-19-1 Drawbar
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-20-2 Swinging Drawbar, With Piton, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-10-1 Hitch, Rear, Standard
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-1-2 Weight Tray Assembly, Front, With Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 41***40 | Sealant, Black Silicone, 310ml Cartridge | 0 |
A3-16-1 Rear Lower Links, Cat 3
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***08 | Kit-Repair, Cat3 Link | 1 |
A3-12-3 Top Link Assembly, Hook End, 80mm Lift Rams
| 33***04 | Link, Top Assembly, Cat 3 Hook End | 1 |
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
A3-4-1 Front Towing Point
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
A3-11-1 Pickup Hitch
| 14***0Z | Washer, Plain | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-3-1 Front Din 3 Plate, & Tow Point
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***4Z | Bolt, M16x60 | 4 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-10-2 Hitch, Rear, Heavy Duty
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-22-4 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-22-3 Trailer Coupling, Ladder Hitch, 38mm, Rockinger 860d
| 33***21 | Coupling, Trailer Towing, Rockinger 860d01 | 1 |
| 33***34 | Kit-Lever | 1 |
| 33***35 | Kit-Spring | 1 |
A3-14-2 Lift Rod Assembly, Heavy Duty
| 47***07 | Nipple, Grease | 3 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-21-1 Ladder Hitch, Assembly, Rockinger
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
B Bodywork, Cab, Loader End
B1-1-11 Chassis & Fitments, Extended Wheelbase, Conversions 1450mm
| 13***3Z | Nut, M20 | 16 |
| 13***22 | Capscrew, Socket Head, M20 X 120 | 16 |
| 14***2Z | Washer, M20 | 32 |
B1-1-10 Chassis & Fittings, Extended Wheelbase, Conversions 750mm
| 13***3Z | Nut, M20 | 12 |
| 13***18 | Capscrew | 12 |
| 14***2Z | Washer, M20 | 24 |
B1-4-4 Step, Cab Access, Right Hand
| 13***8Z | Bolt, M10 X 30 | 10 |
| 13***3Z | Nut, Lock, M10 | 10 |
| 33***95 | Bracket, Step Support | 1 |
B1-6-1 Fenders, Front
| 13***3Z | Screw, M6x16 | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
B1-3-1 Tank, Diesel Fuel
| 13***5Z | Bolt, M5 X 20mm Long | 5 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***0Z | Bolt, M10 X 100 | 1 |
B1-6-5 Fenders, Front, Abs
| 13***3Z | Screw, M6x16 | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
B1-2-2 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***3Z | Nut, Lock, M10 | 4 |
B1-1-3 Chassis & Fittings
| 13***5Z | Bolt | 8 |
| 13***6Z | Bolt, M16 X 70mm | 6 |
| 13***8Z | Bolt, M16 X 80 | 4 |
B1-5-2 Bonnet Release
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***1Z | Nut | 6 |
| 13***3Z | Nut, Lock, M10 | 1 |
B1-1-1 Chassis & Fittings
| 13***5Z | Bolt | 8 |
| 13***6Z | Bolt, M16 X 70mm | 6 |
| 13***8Z | Bolt, M16 X 80 | 4 |
B1-1-4 Chassis & Fittings
| 13***5Z | Bolt | 8 |
| 13***6Z | Bolt, M16 X 70mm | 6 |
| 13***8Z | Bolt, M16 X 80 | 4 |
B1-9-1 Engine Access Steps
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***3Z | Nut, M12 | 4 |
B1-3-2 Tank, Diesel Fuel
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***1Z | Screw | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
B1-1-2 Chassis & Fittings
| 13***5Z | Bolt | 8 |
| 13***6Z | Bolt, M16 X 70mm | 6 |
| 13***8Z | Bolt, M16 X 80 | 4 |
B1-6-4 Fender Extensions, Rear, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
B1-5-5 Bonnet & Fitting, Utility (Orange)
| 12***55 | Handle | 1 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B1-4-3 Pannier Unit, Left Hand, Abs
| 13***7Z | Screw, Hexagon M8 X 25 | 0 |
| 13***7Z | Bolt, M10x25 | 0 |
| 13***8Z | Bolt, M10 X 30 | 0 |
B1-10-1 Quiet Build Kit
| 13***5Z | Bolt | 12 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 4 |
B1-6-8 Fender Extensions, Rear Abs, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
B1-6-3 Fender Extensions, Front, Optional
| 13***7Z | Screw, M6 X 25mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
B1-5-1 Bonnet & Fittings
| 12***55 | Handle | 1 |
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B1-6-2 Fenders, Rear
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 8 |
B1-4-2 Toolbox
| 12***71 | Padlock | 1 |
| 12***55 | Handle | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
B1-2-1 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***5Z | Capscrew | 4 |
B1-8-1 Mounting, Front Lights
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***3Z | Nut, M12 | 6 |
| 14***9Z | Washer | 12 |
B1-4-1 Pannier Unit, Left Hand
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 0 |
| 13***7Z | Screw, Hexagon M8 X 25 | 0 |
| 13***7Z | Bolt, M10x25 | 0 |
B2-11-21 Seat, Passenger
| 40***14 | Washer | 2 |
| 40***73 | Seat, Passenger | 1 |
| 40***86 | Kit-Headrest, Dynamic Yellow | 1 |
B2-11-7 Seat Suspension Unit, Standard, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-9-1 Soundproofing, Cab
| 24***02 | Grommet | 1 |
| 24***03 | Grommet | 1 |
| 24***05 | Grommet | 1 |
B2-11-3 Seat, Suspension, Standard
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-4-2 Door, Right Hand
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
B2-4-1 Door, Left Hand
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
B2-8-2 Outlet Ducts, Air Conditioning
| 13***5Z | Bolt | 5 |
| 14***6Z | Washer, M6 | 5 |
| 14***04 | Screw | 6 |
B2-11-1 Seats, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***1Z | Nut, M8 | 5 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B2-3-1 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***24 | Glass, Door | 2 |
| 82***50 | Glazing, Front Screen | 1 |
B2-15-1 Light, Working, Blanking Kit
| 14***03 | Screw, 5/8" No 6, Black | 8 |
| 24***08 | Grommet, Blind | 2 |
| 47***01 | Plate, Blanking, Front | 4 |
B2-12-2 Seat Belt
| 13***6Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
B2-11-6 Seat Suspension Unit, High-Spec, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-12-1 Seat Belt
| 47***00 | Kit, Seat Belt, Kit, Seat Belt; Contains All Parts Necessary To Fit. Introduced On Production Builds As An Option From M635637 | 2 |
B2-9-2 Soundproofing, Cab Base
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 44 |
| 33***45 | Panel, Insulation, Bulkhead Top | 1 |
B2-6-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
B2-11-5 Seat Suspension Unit, Standard, Top
| 40***05 | Kit-Lever Locking | 1 |
| 40***06 | Kit-Isolator | 1 |
| 40***07 | Kit-Handle | 1 |
B2-3-3 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***43 | Adhesive, & Sealant, 310ml Cartridge | 0 |
B2-7-1 Ducts, Mouldings, Floormat & Covers
| 13***3Z | Screw, M6x16 | 23 |
| 13***5Z | Bolt | 15 |
| 13***2Z | Bolt, M6 X 50 | 2 |
B2-1-1 Cab Assembly
| 13***1Z | Bolt, M10 X 110 | 2 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***3Z | Nut, M20 | 4 |
B2-5-1 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 7 |
B2-11-4 Seat Suspension Unit, High-Spec, Top
| 40***03 | Kit-Level Control | 1 |
| 40***04 | Kit-Upper Suspension | 1 |
| 40***05 | Kit-Lever Locking | 1 |
B2-11-2 Seat, Suspension, High-Spec
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-1-6 Cab Assembly, Utility (Orange)
| 13***1Z | Bolt, M10 X 110 | 2 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***3Z | Nut, M20 | 4 |
B2-8-1 Cab, Console, Instrument Panel, Covers & Brackets
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***02 | Screw, No 8x1/2" | 2 |
B2-14-1 Visor, Sun
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 47***91 | Cap, Protection; Nsp. San10040 | 2 |
B2-3-2 Windscreen, Heated
| 82***54 | Windscreen, Heated | 1 |
B2-1-5 Cab Assembly, Utility (Orange)
| 13***1Z | Bolt, M10 X 110 | 2 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***3Z | Nut, M20 | 4 |
B2-1-2 Cab Assembly
| 13***1Z | Bolt, M10 X 110 | 2 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***3Z | Nut, M20 | 4 |
B5-9-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-10-1 Lubricants & Filters
| 32***01 | Element, Air Filter, Main | 1 |
| 32***02 | Element, Air Filter, Safety | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
B5-4-1 Decals, North American, Homologation
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
| 81***79 | Label, Warning, General | 1 |
B5-2-1 Decals, Internal
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***43 | Label, Warning French, Read Operating Book | 1 |
B5-1-1 Decals, External
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 14***6Z | Washer, M6 | 3 |
| 81***50 | Label, Transmission Filler | 1 |
B5-1-0 Identification, Serial Plates
B5-10-2 Lubricants & Filters
| 02***50 | Element, Fuel Filter, Water Seperator | 1 |
| 02***55 | Element, Fuel Filter, Cartridge | 1 |
| 02***70 | Element, Oil Filter, Canister Type | 1 |
B5-1-2 Decals, External
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 14***6Z | Washer, M6 | 3 |
| 81***50 | Label, Transmission Filler | 1 |
C Electrics-Machine, Cab & Engine
C1-1-2 Battery & Fittings, Single
| 13***5Z | Bolt | 7 |
| 13***5Z | Bolt, M12x20 | 1 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
C1-1-5 Battery & Isolator, Optional
| 13***5Z | Bolt | 9 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
| 13***3Z | Nut, Self Lock, M6 | 5 |
C1-10-1 Radar Installation
| 13***3Z | Bolt | 4 |
| 13***28 | Bolt, M20 X 180 (10.9) | 2 |
| 13***3Z | Nut, Self Lock | 2 |
C1-3-20 Harness, Non Abs, Sealing Parts
| 72***08 | Connector, Weatherpack Cavity, Seal, Green Packard | 7 |
| 72***19 | Plug, Cavity | 2 |
| 72***54 | Housing, 2 Way Metripack, 150 Fm(Pin) | 1 |
C1-3-7 Harnesses, Chassis, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 0 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C1-1-3 Battery & Isolator, Optional
| 13***5Z | Bolt | 14 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
| 13***3Z | Nut, Self Lock, M6 | 8 |
C1-6-2 Light, Head, Right Hand Dip
| 26***00 | Headlight, R/H. Dip, 12 Volt, Clear | 1 |
| 70***01 | Lens | 1 |
| 70***00 | Light, Unit, Right Hand Dip | 2 |
C1-3-2 Harnesses, Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
C1-1-1 Battery & Fittings
| 13***5Z | Bolt | 7 |
| 13***5Z | Bolt, M12x20 | 1 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
C1-9-1 Horn, Single Tone
| 13***6Z | Bolt, M6x70 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***1Z | Washer | 2 |
C1-3-6 Harnesses, Chassis, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 0 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C1-7-2 Light, Rear Fog
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-3-4 Harnesses, Edc
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***2Z | Nut, Thin M20 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-6-1 Light, Head, Left Hand Dip
| 26***00 | Headlight, L/H. Dip, 12 Volt, Clear | 1 |
| 70***01 | Lens | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 2 |
C1-5-1 Harness Connectors, Sumitomo
| 72***16 | Terminal, Crimp | 2 |
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
C1-3-9 Harnesses, Edc, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***2Z | Nut, Thin M20 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-3-1 Harnesses, Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
C1-7-3 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-1-4 Battery & Fittings
| 13***5Z | Bolt | 7 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
C1-5-2 Harness Connectors, Repair Ip67 Standard
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C1-3-8 Harnesses, Cab, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***1Z | Bolt, M10 X 10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 14***7Z | Washer, Shakeproof | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-10-2 Radar Installation
| 13***3Z | Bolt | 4 |
| 13***28 | Bolt, M20 X 180 (10.9) | 2 |
| 13***3Z | Nut, Self Lock | 2 |
C1-7-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C1-3-5 Harnesses, Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***1Z | Bolt, M10 X 10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
C1-3-10 Harnesses, Italian Build
| 71***00 | Harness, Auxiliary, Number Plate Lamp | 1 |
| 72***12 | Harness, Chassis, 750mm Extension | 1 |
| 72***10 | Harness, Cab, Safim Trailer Brake | 1 |
C1-3-3 Harnesses, Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***1Z | Bolt, M10 X 10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
C1-2-1 Electrical Equipment
| 14***11 | Seal, Bonded | 1 |
| 32***30 | Indicator, Assembly | 1 |
| 33***52 | Boot, Warning Buzzer | 1 |
C2-16-1 Engine Block Heater, 120v
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
C2-4-1 Alternator Mountings
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-5-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-15-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-12-1 Stop Solenoid, Installation
| 02***68 | Adapter, 45d Elbow, Adapter, 45d Elbow; See Frame U7-4-1 Item 5. 90d Elbow Must Be Replaced With 45d When Fitting New Solenoid, To Avert Foul Condition. | 1 |
| 13***3Z | Screw; Replaces 69***21 | 7 |
| 13***3Z | Screw, M6x16 | 4 |
C2-14-1 Alternator Mountings
| 02***60 | Bracket, Alternator Mounting | 1 |
| 02***61 | Spacer | 1 |
| 02***62 | Plate, Alternator Support | 1 |
C2-13-2 Alternator, 120amp
| 14***1D | Washer, M16 | 1 |
| 33***13 | Pulley, Alternator | 1 |
| 71***43 | Fan, Alternator | 1 |
C2-3-1 Alternator, 100amp
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
| 71***04 | Regulator, Assembly | 1 |
C2-13-1 Alternator, 95amp
| 71***00 | Alternator, 12volt - 95amp | 1 |
| 71***01 | Cover, Slip Ring End | 1 |
| 71***02 | Capacitor, Suppression | 1 |
C2-16-2 Engine Block Heater, 240v
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
C2-1-1 Electrical Equipment
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***25 | Switch, Oil Pressure, 1/8" Nptf,Amp | 1 |
| 71***00 | Alternator, 100amp | 1 |
C2-11-1 Electrical Equipment
| 47***75 | Switch, Temperature | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***65 | Switch, Engine Oil Pressure | 1 |
C2-6-1 Engine Block Heater, 240v
| 13***5Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
C2-5-2 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C3-3-1 Control Panel, With Rear Hitch
| 47***00 | Switch; A=Front Power Take-Off, B=2/4wd, C=Rear Power Take-Off. If Front And Rear Power Take-Off Fitted, Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fited., Switch, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only., Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fitted., Switch; A=Blanked, B=2/4wd, C=Rear Power Take-Off. If Rear Power Take-Off Only, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only | 0 |
| 47***35 | Plate, Ag Panel Switch | 1 |
| 70***28 | Cover, Switch, Diff Lock Cut-Out | 1 |
C3-13-1 Heated Windscreen, Electrics
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 10 |
| 48***90 | Plate, Ignition Switch | 1 |
C3-7-1 Light, Interior, Cab
| 47***12 | Bracket, Mounting, Door Light Switch | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 70***00 | Switch, Door Light | 2 |
C3-12-2 Light, Working, Front & Rear
| 24***05 | Grommet | 4 |
| 70***00 | Light, Working | 2 |
| 70***00 | Light, Working | 2 |
C3-1-2 Instrumentation, Front
| 64***01 | Tube, Air, 5 Metre Length | 0 |
| 70***32 | Cover, Switch, Main Lights | 1 |
| 70***33 | Cover, Switch, Rear Fog | 1 |
C3-9-11 Air Conditioning, Unit Assembly
| 13***1Z | Screw, M4 X 12 | 8 |
| 13***3Z | Nut | 2 |
| 30***62 | Unit, Air Conditioning, Assembly | 1 |
C3-14-2 Power Supply, Auxiliary, Without Convenience Socket
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 4 |
C3-9-21 Filter, Air Conditioning
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 2 |
| 32***00 | Filter, Carbon, Cab Intake | 1 |
C3-12-5 Light, Number Plate
| 24***09 | Grommet | 2 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-3-2 Switch Panel, Draft Control
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
| 47***03 | Lever, Rotary Control, Small | 1 |
C3-5-3 Fuse Box & Relays, Rear
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***3Z | Screw, M6x16 | 3 |
C3-9-1 Air Conditioning, Installation
| 13***5Z | Bolt | 10 |
| 30***62 | Unit, Air Conditioning, Assembly | 1 |
| 33***07 | Cover, 'B' Post | 1 |
C3-12-3 Light, Working, Auxiliary
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 48***25 | Gasket | 2 |
| 48***40 | Plate, Blanking | 1 |
C3-1-1 Instrumentation, Front
| 64***01 | Tube, Air, 5 Metre Length | 0 |
| 70***32 | Cover, Switch, Main Lights | 1 |
| 70***33 | Cover, Switch, Rear Fog | 1 |
C3-11-1 Washer Kit, Windscreen
| 13***5Z | Bolt | 2 |
| 24***03 | Grommet | 2 |
| 47***03 | Grommet | 2 |
C3-7-2 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 47***90 | Light, Mask | 1 |
C3-6-1 Switch, Column
| 70***00 | Switch, Column Indicator | 1 |
| 70***00 | Switch, Column, Power Range Change | 1 |
| 82***15 | Screw | 2 |
C3-4-1 Fuse Box & Relays, Front
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-12-1 Light, Head, Right Hand Dip, Auxiliary
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-14-1 Power Supply, Auxiliary, With Convenience Socket
| 13***3Z | Screw, M6x16 | 3 |
| 13***5Z | Bolt | 2 |
| 13***1Z | Nut, M5-8 | 1 |
C3-5-2 Fuse Box & Relays, Rear, Fig.2
| 13***3Z | Nut | 4 |
| 13***3Z | Capscrew | 4 |
| 33***37 | Bracket, Minder Box | 1 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 64***00 | Tube | 0 |
| 71***01 | Jet, Windscreen Washer | 1 |
C3-2-1 Switches, Cab Rear
| 24***09 | Grommet | 3 |
| 26***01 | Clip, Connector | 1 |
| 48***33 | Plate, Ignition Switch | 1 |
C3-10-1 Wash/Wipe, Windscreen
| 13***1Z | Setscrew, M6 X 12mm Long | 3 |
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C3-3-3 Switches & Sensor, Rear Hitch Control, External
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 1 |
C3-9-3 Heater, Installation
| 13***5Z | Bolt | 10 |
| 13***5Z | Bolt, M12x20 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-8-1 Radio, Optional
| 47***88 | Plate, Radio Blanking | 1 |
| 71***00 | Aerial | 1 |
| 71***01 | Speaker | 2 |
C3-7-3 Ashtray & Lighter
| 26***90 | Ashtray | 1 |
| 71***00 | Lighter, Cigar | 1 |
C3-5-1 Fuse Box & Relays, Rear, Fig.1
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 7 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
C3-9-2 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***2Z | Bolt, M6 X 50 | 5 |
C3-6-2 Switch, Column, Manual Gearshift
| 48***30 | Bracket, Steering Column, Shroud Mounting | 1 |
| 70***00 | Switch, Column Indicator | 1 |
| 82***15 | Screw | 2 |
C3-9-12 Heater Assembly
| 13***3Z | Nut | 4 |
| 30***60 | Heater, Assembly | 1 |
| 30***26 | Filter, Recirculation | 1 |
D Controls-Machine, Engine & Steering
D1-2-2 Valve Assembly, Pneumatic
| 25***48 | Valve, Manifold Assembly, 4 Station | 1 |
| 47***67 | Manifold, 4 Station | 1 |
| 47***71 | Screw, M2.5 X 25 | 8 |
D1-10-1 Control, Pick Up Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
D1-2-3 Ram, Assembly, Pneumatic Gearchange
| 47***62 | Elbow, 1/8" X 6mm | 3 |
| 47***88 | Nut | 2 |
| 47***91 | Clevis, Assembly | 2 |
D1-7-2 Control, Hydraulic, 3 & 4 Spool Valves
| 13***5Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-11-1 Control, Ladder Hitch Release
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 2 |
D1-4-1 Controls, Brake & Clutch
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Screw, M8x30 | 3 |
D1-4-2 Controls, Brake & Clutch
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
D1-3-1 Brake, Parking
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
D1-6-1 Control, Hydraulic, 2 Spool Valve
| 13***5Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-8-1 Control, Valve Flow
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***33 | Knob, Control; Same As 47***17 | 1 |
D1-1-2 Gearshift, Manual Range Change
| 13***5Z | Bolt | 12 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
D1-6-2 Control, Hydraulic, 2 Spool Valve
| 13***5Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-7-1 Control, Hydraulic, 3 & 4 Spool Valves
| 13***5Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-2-1 Gearshift, Air Assisted, Range Change
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
D1-1-1 Gearshift, 5 Or 6 Speed Gearbox
| 12***02 | Plate, Compression | 2 |
| 13***3Z | Screw, M6x16 | 1 |
| 13***5Z | Bolt | 6 |
D1-9-1 Control, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***3Z | Nut | 2 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 12***02 | Knob, Controls, Yellow | 1 |
D2-10-1 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
D3-5-1 Steering Shaft, Intermediate
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 48***44 | Shaft, Steering, Adjustable, Inter | 1 |
D3-1-1 Steering Wheel, Installation
| 11***03 | Clip | 1 |
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
D3-4-1 Steering Shaft, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
D3-2-1 Steering, Installation
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***8Z | Bolt | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
D3-3-1 Motor, Steering
| 47***41 | Steering Drop Arm | 1 |
| 47***55 | Kit, Sector Shaft Sealing | 1 |
| 47***58 | Kit, Pitman Arm Retainer | 1 |
E Hydraulics & Air Including, Steering
E1-10-1 Circuit, Auxiliary, 3/4 Spool, Rear
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 10 |
| 24***10 | O Ring | 2 |
E1-14-1 Circuit, Auxiliary, 4 Spool, Front, With Hitch
E1-7-1 Circuit, Front Hitch
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
E1-20-2 Circuit, Flow Divider, Rear, Without Trailer Brake Valve
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***04 | Nut | 1 |
E1-13-1 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-8-2 Circuit, Auxiliary, 2 Spool, Rear, Utility
| 13***4Z | Nut, 1/2" B.S.P. | 4 |
| 23***10 | O Ring, 1/2"Bsp | 4 |
| 45***01 | Kit-Seal | 1 |
E1-4-1 Circuit, Steering
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
E1-3-1 Circuit, Front & Rear Pto
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-5-1 Circuit, Differential Lock
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 24***03 | O Ring | 1 |
| 24***09 | Grommet | 1 |
E1-16-1 Circuit, Auxiliary, Free Flow Return, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***5Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-6-1 Circuit, Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-14-2 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-2-1 Circuit, Cooling, Transmission
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt, M8x40 | 1 |
E1-15-1 Circuit, Auxiliary, Free Flow Return, Rear
| 13***5Z | Nut | 1 |
| 23***11 | O Ring, 5/8"Bsp | 2 |
| 45***01 | Kit-Seal | 1 |
E1-4-2 Circuit, Steering
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
E1-10-2 Circuit, Auxiliary, 3/4 Spool, Rear, Utility
| 13***4Z | Nut, 1/2" B.S.P. | 6 |
| 23***10 | O Ring, 1/2"Bsp | 8 |
| 45***01 | Kit-Seal | 1 |
E1-8-1 Circuit, Auxiliary, 2 Spool, Rear
| 13***4Z | Nut, 1/2" B.S.P. | 4 |
| 23***10 | O Ring, 1/2"Bsp | 6 |
| 24***10 | O Ring | 2 |
E1-21-1 Circuit, Qrc Drain
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
E1-20-1 Circuit, Flow Divider, Rear, With Trailer Brake Valve
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-1-1 Circuit, Neutral
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-2-2 Circuit, Transmission
| 13***8Z | Screw, M8x30 | 1 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-11-1 Circuit, Auxiliary, 3/4 Spool, Front
| 13***8Z | Screw, M8x30 | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut | 1 |
E2-1-2 Pump, Steer & Suspension
| 20***40 | Pump, Steering/Suspension | 1 |
| 20***18 | Seal, Oil, Radial Lip | 2 |
| 20***19 | Retainer | 1 |
E2-2-1 Pump, Main/Auxiliary, Hydraulic
| 20***00 | Pump, Twin Main/Auxiliary, Hydraulic, 45cc,19cc | 1 |
| 20***23 | Coupling, Muff | 1 |
| 20***39 | Pump, Hydraulic Gear | 1 |
E2-1-1 Pump, Steer & Suspension
| 20***41 | Pump, Steering/Suspension | 1 |
| 20***18 | Seal, Oil, Radial Lip | 2 |
| 20***19 | Retainer | 1 |
E3-11-1 Filter, Hydraulic, Tank Mounted
| 32***04 | O Ring | 1 |
| 32***52 | Filter, Hydraulic, Assembly | 1 |
| 32***90 | Housing, Filter | 1 |
E3-1-1 Valve, Assembly, 2 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-7-1 Valve, Solenoid, Pressure Maintenance
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***2Z | Capscrew | 2 |
| 13***8Z | Capscrew, M5 X 30 | 12 |
E3-3-1 Valve, Section, Directional Control
| 25***39 | Valve, Section, Directional Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-12-1 Filter, Transmission Oil
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E3-1-3 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-10-2 Valve, Flow Regulator, Diverter
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
| 25***72 | Kit-Seal | 1 |
E3-5-1 Valve, Section, Draft Control, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 2 |
| 25***40 | Valve, Section,, Draft Control | 1 |
E3-10-1 Valve, Flow Regulator, Diverter
| 25***45 | Valve, Flow Divider | 1 |
| 25***69 | Cartridge, Sequence | 1 |
| 25***70 | Valve, Directional Control, N.O. Poppet | 1 |
E3-1-2 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-8-1 Valve, Main Relief, In-Line
| 25***18 | Valve, Main Relief, In-Line | 1 |
| 25***78 | Cartridge, Main Relief | 1 |
| 25***13 | Kit-Seal | 1 |
E3-4-1 Valve, Section, Directional Control, With Flow Control
| 25***38 | Valve, Section, Directional, With Flow Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-9-1 Valve, Charge
| 25***98 | Cartridge, Solenoid | 1 |
| 25***50 | Coil, 12v, Deutsch Connector | 1 |
| 25***51 | Valve, Solenoid Assembly | 1 |
E3-2-1 Valve, Section, Inlet, With Main Relief
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***45 | O Ring | 2 |
| 25***54 | Plug | 1 |
E4-2-2 Ram, Suspension, 'Cushioned', Optional 45mm Heavy Duty
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***13 | Cover, Protective Tube | 1 |
E4-1-1 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-5-2 Ram, Rear Hitch, 85mm
| 47***05 | Nipple, Grease | 2 |
| 47***04 | Ring, Retaining, 85mm Ram | 1 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
E4-2-1 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-4-1 Ram, Front Hitch, 60mm
| 47***01 | Kit-Seal, 60mm Cyl X 30mm Rod | 1 |
| 47***02 | Nut, End | 1 |
| 47***03 | Cylinder, Ram | 1 |
E4-5-1 Ram, Rear Hitch, 80mm
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
| 47***96 | Bearing, Assembly; Cbm Would Not Supply To Jcb.But Skf P/No, Gem 45 Es-2rs. Supplier Code 00220.San 09757 | 1 |
E4-2-3 Ram,, Suspension, 'Cushioned' 50mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 1 |
| 47***62 | Ram, Suspension 50mm | 2 |
F Axles, Wheels & Transmission
F1-3-3 Axle Drive Head, 55kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F1-2-3 Hub & Components, Front Left Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-4-2 Differential, Components, Maxtrac
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-4-1 Differential, Components, No Spin
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F1-1-5 Axle Assembly, Front, 65kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-3-1 Axle Drive Head, 80kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F1-2-4 Hub & Components, Front Right Hand, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-3-2 Axle Drive Head, 65kph
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F1-2-1 Hub & Components, Front Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-1-2 Axle Assembly, Front, 65kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-2-2 Hub & Components, Front Right Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F1-1-4 Axle Assembly, Front, 80kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-1-1 Axle Assembly, Front, 80kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-1-6 Axle Assembly, Front, 55kph, Sd70, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-1-3 Axle Assembly, Front, 55kph, Sd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F2-1-12 Axle Assembly, Rear, 40kph, 19.8 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-2-5 Hub & Components, Rear Right Hand,Pd70, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-3-3 Axle Drive Head, 40kph, 19.8 : 1, Pd70
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-1-11 Axle Assembly, Rear, 65kph, 16.62 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-8 Axle Assembly, Rear, 65kph, 16.41 : 1, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-4-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-3-2 Axle Drive Head, 65kph, 16.41 : 1, Pd70
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-2-3 Hub & Components, Rear Pd90, Right Hand & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 45***01 | Carrier, Planetary Hub | 1 |
| 45***02 | Housing, Bearing | 1 |
F2-1-10 Axle Assembly, Rear, 80kph, 12.29 : 1 Pd90, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-2-2 Hub & Components, Rear Right Hand,Pd70
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-1-4 Axle Assembly, Rear, 80kph, 12.29 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-2-1 Hub & Components, Rear Left Hand, Pd70
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-3-5 Axle Drive Head, 65kph, 16.62 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-1-6 Axle Assembly, Rear, D0kph, 19.8 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-1 Axle Assembly, Rear, 80kph, 12.49 : 1, Pd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-7 Axle Assembly, Rear, 80kph, 12.49 : 1, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-2-6 Hub & Components, Rear, Pd90 Abs, Right Hand & Left Hand
| 10***79 | Plug, C/W O Ring | 1 |
| 13***1Z | Nut, Hex M20, High Strength | 32 |
| 45***01 | Carrier, Planetary Hub | 1 |
F2-3-1 Axle Drive Head, 80kph, 12.49 : 1, Pd70
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-2-4 Hub & Components, Rear Left Hand, Pd70, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-3-6 Axle Drive Head, 40kph, 19.8 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-1-2 Axle Assembly, Rear, 65kph, 16.41 : 1, Pd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-3-4 Axle Drive Head, 80kph, 12.29 : 1, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-1-3 Axle Assembly, Rear, 40kph, 19.8 : 1, Pd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-5 Axle Assembly, Rear, 65kph, 16.62 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-9 Axle Assembly, Rear, 40kph, 19.8 : 1, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F3-5-1 Mounting, Chock
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***67 | Chock, Wheel, Size 3, Folding Type | 2 |
F3-3-2 Wheels & Tyres, 480/70-R30, Goodyear
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30 | 1 |
F3-3-20 Wheels & Tyres, 540/65-R30 Tm800, Pirelli
| 15***01 | Valve | 1 |
| 33***82 | Wheel, Assembly, Left Hand, Pirelli 60***28 | 1 |
| 33***85 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
F3-3-16 Wheels & Tyres, 480/70-R30, Pirelli (1880mm Track)
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-3-25 Wheels & Tyres, 520/65-R30 Nokian
| 15***01 | Valve | 1 |
| 33***07 | Wheel, Assembly, 52***30 Nokian | 2 |
| 33***10 | Wheel, Assembly, 52***30 Nokian | 2 |
F3-3-7 Wheels & Tyres, 14.5-R24
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, W12 X 24 | 1 |
| 42***00 | Tyre, 14.5r24 Sp Pg 7 152g, Dunlop | 1 |
F3-3-1 Wheels & Tyres, 480/70-R30, Pirelli
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30 | 1 |
F3-3-11 Wheels & Tyres, 480/70-R30, Pirelli (2015mm Track)
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-3-6 Wheels & Tyres, 580/70-R26, Michelin
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw20a X 26 | 1 |
| 42***00 | Tyre, 580/70 R26 Michelin, Xm27 Tl 142 B; 2165mm Track, Max Speed 55 Kph. Nsp - Franchised Supply Only. Do Not Use If No-Spin Differential Is Fitted., Tyre, 580/70 R26 Michelin, Xm27 Tl 142 B | 1 |
F3-3-13 Wheels & Tyres, 540/65-R30, Michelin
| 13***6Z | Bolt | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-3-12 Wheels & Tyres, 480/70-R30, Goodyear
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-3-10 Wheels & Tyres, 540/65-R30 Pirelli, 600/65-R28 Pirelli, 65kph Australia Only
| 15***01 | Valve | 1 |
| 33***80 | Wheel, Assembly, Left Hand, Pirelli, 60***28 | 1 |
| 33***83 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
F3-3-18 Wheels & Tyres, 540/65-R30 Pirelli, 600/65-R28 Pirelli, 65kph Australia Only
| 15***01 | Valve | 1 |
| 33***82 | Wheel, Assembly, Left Hand, Pirelli 60***28 | 1 |
| 33***85 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
F3-2-2 Propshafts, Rear Axle, Fixed, 1450mm Extended Wheelbase & 6 Wheeler
| 13***2Z | Bolt, M12 X 50mm | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
F3-3-24 Wheels & Tyres, 520/65-R30 Nokian
| 15***01 | Valve | 1 |
| 33***07 | Wheel, Assembly, 52***30 Nokian | 4 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-3-21 Wheels & Tyres, 480/70-R30 Pirelli, 600/65-R28 Pirelli, Australian Builds
| 15***01 | Valve | 1 |
| 33***29 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
| 33***30 | Wheel, Assembly, Left Hand, Pirelli 60***28 | 1 |
F3-3-3 Wheels & Tyres, 540/65-R30 Michelin, 540/65-R30 Pirelli
| 13***6Z | Bolt | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-3-23 Wheels & Tyres, 16.9-R30, Nokian
| 15***01 | Valve | 1 |
| 33***25 | Wheel, Assembly Nokian, 16.9r30 R/H 10 Stud | 2 |
| 33***26 | Wheel, Assembly, 16.9r30 12 Stud | 2 |
F3-2-1 Propshafts, Axle Drive, Rear
| 82***47 | Nut, Cleveloc | 8 |
| 82***50 | Stud, Bolt | 8 |
| 82***88 | Bolt, M10x30 | 4 |
F3-3-19 Wheels & Tyres, 480/70-R30 Pirelli, 600/65-R28 Pirelli, Australian Builds
| 15***01 | Valve | 1 |
| 33***31 | Wheel, Assembly, Right Hand, Pirelli 60***28 | 1 |
| 33***32 | Wheel, Assembly, Left Hand, Pirelli 60***28 | 1 |
F3-3-17 Wheels & Tyres, 600/65-R28(76"Track), Pirelli
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 33***80 | Wheel, Assembly, Left Hand, Pirelli, 60***28 | 1 |
F3-3-15 Wheels & Tyres, 495/70-R24, Michelin
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-1-1 Propshafts, Axle Drive, Front
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***3Z | Nut | 4 |
| 82***88 | Bolt, M10x30 | 4 |
F3-4-1 Wheels & Tyres, 14.9-R24, Nokia
| 41***00 | Rim, Wheel, W12 X 24 | 1 |
| 42***00 | Tyre, Nokia 14.9x24 | 1 |
| 47***00 | Wheel, And Tyre, Nokia, 14.9-24 | 4 |
F3-3-8 Wheels & Tyres, 620/70-R26, Michelin
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw20a X 26 | 1 |
| 41***00 | Rim, Wheel, Dw20a X 26 | 1 |
F3-3-5 Wheels & Tyres, 495/70-R24, Michelin
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-3-4 Wheels & Tyres, 520/70-R30, Pirelli
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 42***00 | Tyre, 520/70-R30 Pirelli | 1 |
F3-3-22 Wheels & Tyres, 16.9-R30, Nokian
| 15***01 | Valve | 1 |
| 33***25 | Wheel, Assembly Nokian, 16.9r30 R/H 10 Stud | 4 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-3-14 Wheels & Tyres, 520/70-R30, Pirelli
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 12 Stud | 1 |
F3-3-9 Wheels & Tyres, 600/65-R28(76"Track), Pirelli
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 33***80 | Wheel, Assembly, Left Hand, Pirelli, 60***28 | 2 |
F3-2-3 Propshafts, Rear Axle, Drive, 1450mm Extended Wheelbase & 6 Wheeler
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F5-2-3 Transmission Gearbox, Assembly, Single Pto, 55/65/80kph, Airshift Standard
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-3-3 Pipework, Powershift Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***4Z | Bolt | 2 |
F5-1-8 Transmission Gearbox, Assembly, Twin Pto, 55/65/80kph Manual Heavy Duty
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-2 Transmission Gearbox, Assembly, Twin Pto, 40kph Manual, Standard
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
F5-2-4 Transmission Gearbox, Assembly, Twin Pto, 55/65/80kph Airshift Standard
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-5 Transmission Gearbox, Assembly, Single Pto, 40kph Airshift, Heavy Duty
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-3-1 Pipework, Pto Drain
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F5-2-2 Transmission Gearbox, Assembly, Twin Pto, 40kph Airshift, Standard
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-1 Transmission Gearbox, Assembly, Single Pto, 40kph Manual, Standard
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-7 Transmission Gearbox, Assembly, Single Pto, 55/65/80kph Manual, Heavy Duty
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-4-1 Dipstick & Filler, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***26 | Washer, Seal | 1 |
F5-1-4 Transmission Gearbox, Assembly, Twin Pto, 55/65/80kph Manual, Standard
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-6 Transmission Gearbox, Assembly, Twin Pto, 40kph Airshift, Heavy Duty
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-3 Transmission Gearbox, Assembly, Single Pto, 55/65/80kph Manual, Standard
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 1 |
F5-2-1 Transmission Gearbox, Assembly, Single Pto, 40kph Airshift, Standard
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-6 Transmission Gearbox, Assembly, Twin Pto, 40kph Manual, Heavy Duty
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-3-2 Pipework, Wet Clutch Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***1Z | Nut | 2 |
F5-2-8 Transmission Gearbox, Assembly, Twin Pto, 55/65/80kph Airshift, Heavy Duty
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-2-7 Transmission Gearbox, Assembly, Single Pto, 55/65/80kph Airshift, Heavy Duty
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F5-1-5 Transmission Gearbox, Assembly, Single Pto, 40kph Manual, Heavy Duty
| 13***3Z | Bolt, M10 X 55 | 9 |
| 13***9Z | Screw, M10 X 35 | 19 |
| 13***5Z | Bolt, M12 X 65mm | 8 |
F6-1-3 Gearbox,Range,30kph, Airshift H/Duty, (Long Levers)
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-7-1 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***07 | Shaft, Selector, Low & Reverse | 1 |
F6-1-5 Gearbox,Range,Manual, 40kph & 65/80kph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-2-1 Gearbox Housing
| 13***9Z | Bolt | 1 |
| 13***1Z | Bolt | 2 |
| 13***7Z | Bolt, Coated | 7 |
F6-1-4 Gearbox,Range, Airshift,Long Levers, 40,50 & 80kph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F6-1-1 Gearbox, Range, Manual
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-6-1 Gear Change, 40kph & 80kph, Airshift
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-3-3 Shaft,Input &, Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F6-1-2 Gearbox, Range, Airshift
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-8-1 Gear Change,Manual, Gear Shift
| 13***5Z | Bolt | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***23 | Pin | 1 |
F6-5-1 Shaft, Output Group, 4 Wheel Drive
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
| 44***03 | Washer, Thrust; Superseded By 82***82 | 1 |
F6-4-1 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F7-2-1 Gearbox, 6 Speed, Case Assemblies
| 45***12 | Bush, Selector Shaft | 2 |
| 45***13 | Plug, Cup | 2 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
F7-5-1 Gearbox, 6 Speed, Counter Shaft Assy
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F7-4-1 Gearbox, 6 Speed, Input Shaft Assembly
| 45***49 | Plunger | 3 |
| 45***50 | Roller, 8mm | 3 |
| 45***51 | Spring, Synchro | 3 |
F7-9-2 Gearbox, 5 Speed, Remote Control Assy
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F7-1-2 Gearbox, 6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-6-1 Gearbox, 6 Speed, Front Cover Assembly
| 45***21 | Washer, Spring, M12 | 4 |
| 45***28 | Washer, Spring | 5 |
| 45***32 | Screw, M12 | 4 |
F7-3-1 Gearbox, 6 Speed, Mainshaft Assembly
| 45***06 | Kit, Circlip | 2 |
| 45***44 | Gear, 3rd | 1 |
| 45***45 | Bearing, Needle Roller | 2 |
F7-8-1 Gearbox, 6 Speed, Selector Controls
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F7-1-1 Gearbox, 6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-10-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F7-7-1 Gearbox, 6 Speed, Rear Housing
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 1 |
F7-9-1 Gearbox, 6 Speed, Remote Control Assy
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
F8-4-1 Clutch Assembly, Input
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***04 | Retainer, Spring | 1 |
F8-4-3 Clutch Assembly, Low
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-1-2 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-4-2 Clutch Assembly, Medium/High
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-1-1 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***01 | Cover, End | 2 |
F8-3-1 Gearbox Housing, Splitter & Pto, Clutch Assemblies
| 13***9Z | Screw, M10 X 35 | 18 |
| 33***25 | Plate, Friction | 2 |
| 33***26 | Plate, Counter, Brake | 1 |
F8-2-1 Clutch Assembly, Power Take Off, Front
| 13***7Z | Bolt, Coated | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***33 | Washer, Bonded | 1 |
F8-10-1 Solenoid & Valves, Splitter Gearbox
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 16 |
F8-2-2 Clutch Assembly, Power Take Off, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
F8-9-1 Clutch Drum, Carrier & Input Gear, Assembly
| 33***85 | Plate, Bearing Cover | 1 |
| 45***24 | Carrier, Clutch & Input Gear | 1 |
| 45***11 | Gear, 27t Power Take-Off Input | 1 |
F8-5-1 Gear Group, Splitter & Pto, Input, Output & Intermediate
| 13***5Z | Bolt | 5 |
| 22***28 | Circlip | 1 |
| 22***85 | Circlip, Internal | 1 |
F8-7-1 Clutch Assembly, Wet Master
| 13***9Z | Screw, M10x35mm | 15 |
| 13***3Z | Bolt, M10 X 55 | 3 |
| 13***21 | Bolt | 12 |
F8-6-1 Gearbox, Splitter & Pto, Selector Mechanism
| 13***7Z | Bolt, Coated | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***10 | Screw | 2 |
F8-8-1 Clutch Assembly, Drum, Hub, Pressure Plates
| 13***16 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 22***60 | Circlip | 1 |
F9-11-1 Propshaft, Power Take Off, Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-2-2 Gearbox, Power Take Off, Front, ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F9-12-1 Guard, Rear, Power Take Off
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***8Z | Bolt, M12 X 30 | 1 |
F9-10-1 Power Take Off, Rear Installation
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F9-11-2 Propshaft,, Rear Power Take Off, Extended Wheelbase Machines.
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-3-2 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
F9-1-2 Power Take Off, Front Attachments, Single
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 3 |
F9-2-1 Gearbox, Front P.T.O Transfer
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F9-3-1 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-12-2 Guard, Rear, Power Take Off, Static, French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-1-1 Power Take Off, Front Attachments, Twin
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***0Z | Bolt, M10 X 40 | 16 |
G Brakes
G1-17-1 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 99***01 | Kit-Repair, Palm Coupling, Red/Yellow | 1 |
G1-30-1 Brakes, Trailer, Hydraulic
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 15***00 | Adapter, 'T' | 1 |
G1-1-6 Brake, System, Twin Caliper, Abs
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***8Z | Bolt | 3 |
G1-13-2 Actuator, Air & Hydraulic
| 13***8D | Setscrew, M10 X 30 | 2 |
| 14***8D | Washer, M10 | 2 |
| 15***01 | Chamber, Brake | 1 |
G1-7-4 Trailer Braking, Circuit, Twin Line Palm Coupling, Standard & Abs
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
G1-4-2 Air Charge Circuit
| 13***1Z | Screw, Hex Head, M8 X 12 | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt, M10 X 30 | 4 |
G1-1-7 Brake, System, Single Caliper, Abs
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***8Z | Bolt | 3 |
G1-4-1 Air Charge Circuit
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt, M10 X 30 | 4 |
G1-31-1 Valve, Trailer Brake, Hydraulic
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 1 |
G1-7-6 Trailer Braking, Circuit, Abs, Twin Line Palm Coupling
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
G1-1-8 Brake, System, Twin Caliper, Abs
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***8Z | Bolt | 3 |
G1-30-2 Brakes, Trailer, Hydraulic
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-5-2 Foot Brake Circuit, Abs
| 13***3Z | Screw, M6x16 | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt, M8x40 | 4 |
G1-7-3 Control Line Filter, Trailer Braking, Circuit
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
G1-5-1 Foot Brake Circuit
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
G1-8-2 Handbrake Circuit
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-7-2 Trailer Braking, Circuit, Twin Line 'C' Coupling
| 13***5Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
G1-18-1 Coupling 'C', Trailer Brakes
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, 'C' Type, Female, C/W Shut Off, Red | 1 |
| 45***01 | O Ring | 1 |
G1-13-1 Actuator, Air & Hydraulic
| 15***00 | Actuator, Air/Hydraulic | 1 |
| 15***01 | Chamber, Brake | 1 |
| 15***02 | Ring, Clamp | 1 |
G1-3-1 Brake Caliper, Rear
| 15***60 | Brake, Caliper Assembly, 60mm | 1 |
| 15***17 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***03 | Kit-Seal, Brake Caliper | 2 |
G1-20-1 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-15-1 Brake, Actuator, Parking
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
| 47***34 | Kit-Repair | 1 |
G1-1-5 Brake, System, Single Caliper, Abs
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***8Z | Bolt | 3 |
G1-1-1 Brake, System, Single Caliper
| 13***8Z | Bolt | 3 |
| 13***2Z | Bolt, M16x50m | 2 |
| 13***9Z | Screw, M10 X 35 | 1 |
G1-7-1 Trailer Braking, Circuit, Twin Line Palm Coupling
| 13***5Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
G1-16-2 Valve, Trailer Control, With Twin Caliper Brakes
| 15***01 | Kit-Repair, Supply Dump Valve | 1 |
| 15***02 | Kit-Repair, Trailer Control V/V | 1 |
| 15***00 | Valve, Trailer Control, 1.4 Bar Predominance | 1 |
G1-10-1 Air Drier
| 15***84 | Drier, Air, Regenerative | 1 |
| 15***05 | Cartridge, Desiccant | 1 |
| 15***06 | Kit-Heater | 1 |
G1-6-2 Foot Brake, Actuator Circuit, Abs
| 13***7Z | Bolt, M10x25 | 2 |
| 13***7Z | Bolt | 6 |
| 13***7Z | Bolt, M8 X75mm Long | 6 |
G1-2-1 Brake Caliper, Front
| 15***61 | Brake, Caliper Assembly, 75mm | 1 |
| 15***18 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***04 | Kit-Seal, Brake Caliper | 2 |
G1-4-3 Air Charge Circuit, Standard & Abs
| 02***17 | Olive, 16mm | 1 |
| 13***1D | Setscrew, M8 X 12mm | 1 |
| 13***5D | Setscrew, M8x20 | 2 |
G1-19-1 Air Coupling, Duomatic
| 13***5D | Setscrew, M8x20 | 2 |
| 45***00 | Coupling, Trailer Brake, Duomatic | 1 |
| 45***01 | Kit-Repair, Duomatic Coupling | 1 |
G1-8-1 Handbrake Circuit
| 47***00 | Brake, Parking Actuator | 1 |
| 64***00 | Tube, Pvc | 0 |
| 64***00 | Pipe, Air 3/8" | 0 |
G1-6-1 Foot Brake, Actuator Circuit
| 13***7Z | Bolt | 4 |
| 14***11 | Seal, Bonded | 2 |
| 14***9Z | Washer | 4 |
G1-21-1 Valve, Circuit Protection
| 15***00 | Valve, Circuit Protection | 1 |
G1-17-2 Couplings, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-22-1 Valve, Brake Threshold
| 15***00 | Valve, Brake Threshold | 1 |
| 99***04 | Kit-Repair, Threshold Valve | 1 |
G1-1-10 Brake, System, Twin Caliper, Standard
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***8D | Bolt, M8x30mm | 4 |
| 13***2D | Bolt, M16x50 | 2 |
G1-14-1 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-1-3 Brake, System, Single Caliper
| 13***8Z | Bolt | 3 |
| 13***2Z | Bolt, M16x50m | 2 |
| 13***9Z | Screw, M10 X 35 | 1 |
G1-1-4 Brake, System, Twin Caliper
| 13***8Z | Bolt | 3 |
| 13***2Z | Bolt, M16x50m | 2 |
| 13***5Z | Bolt, M16x65 | 4 |
G1-9-1 Brakes, Trailer Air, Single Line, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
G1-1-9 Brake, System, Single Caliper, Standard
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***8D | Bolt, M8x30mm | 1 |
| 13***8Z | Bolt | 3 |
G1-18-2 Coupling 'C', Trailer Brakes
| 14***2Z | Washer, M20 | 2 |
| 33***43 | Cover, 'C' Coupling | 1 |
| 45***36 | Coupling, 'C'Male, Yellow | 1 |
G1-1-2 Brake, System, Twin Caliper
| 13***8Z | Bolt | 3 |
| 13***2Z | Bolt, M16x50m | 2 |
| 13***5Z | Bolt, M16x65 | 4 |
G1-21-2 Valve, Circuit Protection
| 15***75 | Valve, Circuit Protection | 1 |
G1-11-1 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-16-3 Valve, Trailer Control, Single Caliper
| 15***25 | Kit-Repair, Brake Valve | 1 |
| 92***79 | Valve, Trailer Control, Single Caliper | 1 |
G1-2-2 Brake Caliper, Front, Twin Caliper
| 15***62 | Brake, Caliper Assembly, 60mm | 1 |
| 15***19 | Kit-Brake Pad, C/W Pins & Springs | 1 |
| 47***08 | Nipple, Grease | 1 |
G1-23-1 Valve, Auto-Drain
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***01 | Kit-Repair, Auto Drain Valve | 1 |
G1-16-1 Valve, Trailer Control
| 15***01 | Kit-Repair, Supply Dump Valve | 1 |
| 15***02 | Kit-Repair, Trailer Control V/V | 1 |
| 15***00 | Valve, Trailer Control | 1 |
G1-7-7 Trailer Braking, Circuit, Twin Line 'C' Coupling
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
G1-1-12 Brake, System, Twin Caliper, Standard
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***8D | Bolt, M8x30mm | 4 |
| 13***2D | Bolt, M16x50 | 2 |
G1-1-11 Brake, System, Single Caliper, Standard
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***8D | Bolt, M8x30mm | 1 |
| 13***8Z | Bolt | 3 |
G1-16-4 Valve, Trailer Control, With Twin Caliper Brakes
| 15***25 | Kit-Repair, Brake Valve | 1 |
| 92***01 | Valve, Trailer Control, Twin Caliper | 1 |
G1-6-3 Foot Brake, Actuator Circuit, Standard
| 13***4D | Screw | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***7Z | Bolt | 4 |
G1-5-3 Foot Brake Circuit, Standard
| 13***3D | Setscrew | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
G1-7-5 Trailer Braking, Circuit, Twin Line 'C' Coupling, Standard & Abs
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
G1-12-1 Valve, Footbrake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
| 47***00 | G.A. | 1 |
S Suspension
S1-1-1 Suspension, Front
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***1Z | Bolt, M20 X 45 Long | 2 |
| 13***9Z | Bolt, M10x90mm | 4 |
S1-2-1 Suspension, Front, Heavy Duty
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***1Z | Bolt, M20 X 45 Long | 2 |
| 13***9Z | Bolt, M10x90mm | 4 |
S2-1-1 Suspension, Rear
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
S2-2-1 Suspension Rear, Heavy Duty
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
S3-1-1 Suspension, Rear, Hydraulics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M6 X 60 | 2 |
S3-2-1 Suspension, Rear, Hydraulics, Heavy Duty
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***3Z | Bolt, M8 X 55 | 1 |
T Engine 1006-6t
T1-1-1 Engine, Complete, Yb Build
| 01***39 | Engine, Complete, 1006-6t4, Turbocharged, 168bhp | 1 |
T1-8-1 Engine Mountings
| 02***83 | Stud | 8 |
| 02***53 | Nut | 8 |
| 02***54 | Washer | 8 |
T1-2-1 Engine, Short, Yb Build
| 02***90 | Engine, Short | 1 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-7-1 Flywheel & Housing, Yb Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***82 | Seal, Felt | 1 |
T1-3-2 Block Assembly, Yb Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***08 | Plug | 1 |
T1-3-1 Block Assembly, Yb Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***08 | Plug | 1 |
T1-6-1 Timing Case, Camshaft & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-5-1 Fans, Pulleys, & Fan Belt, Yb Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-6-2 Timing Case, Auxiliary Drive
| 02***82 | O Ring | 1 |
| 02***61 | Plate, Compressor Mounting | 1 |
| 02***62 | Hub | 1 |
T2-1-1 Cylinder Head, Yb Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 1 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-4-1 Lifting Plates, Engine
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 1 |
T2-2-1 Rocker Assembly, Push Rods & Tappets, Yb Build
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-3-1 Rocker Cover
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
T3-2-1 Manifold, Exhaust, Yb Build
| 02***04 | Gasket | 2 |
| 02***15 | Gasket | 1 |
| 02***96 | Manifold, Exhaust | 1 |
T3-4-3 Silencer & Extension, Yb Build
| 02***41 | Gasket | 1 |
| 02***15 | Stud | 6 |
| 02***16 | Nut | 6 |
T3-4-2 Exhaust System, With, Exhaust Aspirator
| 02***41 | Gasket | 1 |
| 02***15 | Stud | 6 |
| 02***16 | Nut | 6 |
T3-5-1 Exhaust Brake, Installation
| 02***19 | Gasket | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Bolt, M8 X 55 | 4 |
T3-3-1 Filter, Air, Yb Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-1-1 Manifold, Induction, Yb Build
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
| 02***82 | Manifold, Induction | 1 |
T3-4-1 Silencer & Extension, Yb Build
| 02***41 | Gasket | 1 |
| 02***15 | Stud | 6 |
| 02***16 | Nut | 6 |
T3-3-2 Filter, Air, Exhaust Aspirated, Yb Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-5-2 Brake, Exhaust
| 47***01 | Brake, Assembly, Exhaust | 1 |
| 47***05 | Slide | 1 |
| 47***06 | Plate, Pressure | 1 |
T3-4-4 Exhaust System, With, Exhaust Aspirator
| 02***41 | Gasket | 1 |
| 02***15 | Stud | 6 |
| 02***16 | Nut | 6 |
T4-4-1 Radiator & Hoses
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***26 | Washer, Seal | 1 |
T4-3-1 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 8 |
| 13***3Z | Bolt, M10 X 55 | 2 |
T4-2-1 Thermostat, Housing, Inlet & Outlet
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-1-1 Pump, Water, Yb Build
| 02***82 | O Ring | 1 |
| 02***86 | Gasket | 1 |
| 02***87 | O Ring | 1 |
T5-4-1 Filter, Oil, Yb Build
| 02***96 | Gasket | 1 |
| 02***16 | Connector | 2 |
| 02***05 | Head, Filter | 1 |
T5-2-1 Pump, Oil, & Relief Valve, Yb Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-1-1 Sump, Oil, & Fittings, Yb Build
| 02***05 | Insert | 2 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 1 |
T5-3-1 Piston Cooling Jets, Yb Build
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
T5-5-1 Cooler, Oil, & Pipework, Yb Build
| 02***63 | Housing, Oil Feed | 1 |
| 02***14 | Seal, O Ring | 2 |
| 02***18 | Gasket, Oil Cooler Housing | 1 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Yb Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
T6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***91 | Gasket | 1 |
| 02***18 | Bolt | 4 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 3 |
T6-1-1 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-3-1 Fuel Pipes, Injection Pump, Yb Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***18 | Nut | 2 |
T6-3-2 Fuel Pipes
| 02***18 | Nut | 2 |
| 02***22 | Olive | 4 |
| 02***48 | Elbow | 1 |
T6-4-1 Fuel Pipes, Tank To Filter
| 02***18 | Nut | 4 |
| 02***22 | Olive | 4 |
| 02***64 | Olive | 2 |
T6-4-2 Fuel Pipes, Tank To Filter
| 02***18 | Nut | 4 |
| 02***22 | Olive | 4 |
| 02***64 | Olive | 2 |
T6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-6-2 Filter, Fuel Sediment
| 14***11 | Seal, Bonded | 2 |
| 32***00 | Filter, Fuel Sediment, 30 Micron | 1 |
| 32***01 | Element, Fuel Filter | 1 |
T6-7-1 Filter, Fuel
| 02***64 | Bracket, Mounting, Fuel Filter | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T7-5-1 Compressor, & Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
T7-3-1 Compressor, Air
| 02***90 | Compressor | 1 |
| 15***96 | Kit-Reed Valve | 1 |
| 15***97 | Kit-Connecting Rod | 1 |
T7-2-1 Turbo, Pipework, Yb Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***06 | Nut | 1 |
T7-4-1 Compressor Pipework
| 02***57 | Union | 2 |
| 02***98 | Spacer | 1 |
| 02***37 | Connector | 2 |
T7-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
T7-2-2 Turbo, Heatshield, Yb Build
| 02***05 | Shield, Heat | 1 |
| 02***15 | Screw | 3 |
T7-1-1 Turbocharger, Yb Build
| 02***58 | Nut, Lock | 1 |
| 02***60 | Ring, Piston | 1 |
| 02***65 | Seal | 1 |
T8-1-1 Gasket Sets, Yb Build
| 02***87 | Kit-Gasket, Top | 1 |
| 02***11 | Kit-Gasket, Bottom | 1 |
U Engine 'B' Series
U1-1-1 Engine, Complete
| 01***34 | Engine, Complete Bta5.9-C185, Turbocharged, 185bhp | 1 |
U1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Machined
| 02***38 | Sleeve, Wear | 1 |
| 02***39 | Dowel, Pin | 1 |
| 02***40 | Crankshaft, Assembly | 1 |
U1-6-2 Timing Case, Auxiliary Drive
| 02***75 | O Ring | 1 |
| 02***78 | Hub | 1 |
| 02***79 | Kit-Hub & Gear, Auxiliary Drive | 1 |
U1-5-1 Fans, Pulleys, & Fan Belt
| 02***32 | Bearing | 1 |
| 02***35 | Hub, Fan | 1 |
| 02***36 | Pulley, Fan | 1 |
U1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
U1-3-1 Block Assembly
| 02***05 | Cap, Main Bearing | 7 |
| 02***06 | Plug, Expansion, D=58mm | 1 |
| 02***07 | Plug, Expansion, D=26mm | 1 |
U1-2-1 Engine, Short
| 02***40 | Engine, Short | 1 |
| 02***0R | Engine, Short | 1 |
U1-6-1 Timing Case, Camshaft & Gears
| 02***43 | Seal | 1 |
| 02***49 | Gasket, Gear Housing | 1 |
| 02***52 | Kit-Seal, Front Oil | 1 |
U1-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***69 | Plate, Cover | 1 |
U1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Fracture Split
| 02***38 | Sleeve, Wear | 1 |
| 02***39 | Dowel, Pin | 1 |
| 02***40 | Crankshaft, Assembly | 1 |
U2-3-1 Rocker Cover
| 02***53 | Bush | 6 |
| 02***55 | Cover, Rocker | 6 |
| 02***56 | Gasket, Rocker Cover | 6 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***76 | Lever, Rocker, Inlet | 1 |
| 02***77 | Lever, Rocker, Exhaust | 1 |
| 02***81 | Lever, Assembly, Rocker | 6 |
U2-1-1 Cylinder Head
| 02***15 | Plug, Pipe, 1/2"Npt | 3 |
| 02***16 | Plug, Pipe | 2 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
U2-4-1 Lifting Plates, Engine
| 02***92 | Bracket, Lifting | 1 |
| 02***93 | Bracket, Lifting | 1 |
| 02***26 | Screw | 2 |
U3-4-1 Exhaust System
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***5Z | Bolt | 2 |
U3-4-4 Exhaust System, With, Exhaust Aspirator
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***5Z | Bolt | 4 |
U3-2-1 Manifold, Exhaust
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***74 | Gasket, Exhaust Manifold | 6 |
| 02***75 | Manifold, Exhaust | 1 |
U3-3-1 Filter, Air
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 2 |
U3-5-1 Heater, Air Intake
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***83 | Gasket, Cooler To Manifold | 1 |
| 02***00 | Heater, Engine | 1 |
U3-4-2 Exhaust System, With, Exhaust Aspirator
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***5Z | Bolt | 4 |
U3-3-2 Filter, Air, Exhaust Aspirated
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 2 |
U3-6-2 Brake, Exhaust
| 15***66 | Brake, Exhaust, Assembly | 1 |
U3-6-1 Exhaust Brake, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
U3-1-1 Manifold, Induction
| 02***78 | Hose, Induction | 1 |
| 02***14 | Manifold, Air Transfer | 1 |
| 02***15 | Gasket | 1 |
U3-4-3 Exhaust System
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 6 |
U4-2-1 Thermostat & Housing
| 02***15 | Plug, Pipe, 1/2"Npt | 2 |
| 02***94 | Housing, Thermostat | 1 |
| 02***95 | Thermostat | 1 |
U4-4-1 Radiator & Hoses
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***26 | Washer, Seal | 1 |
U4-5-1 Cooler, Air Charge
| 02***16 | Plug, Pipe | 1 |
| 02***81 | Tap, Drain | 1 |
| 02***82 | Decal, Caution | 1 |
U4-1-1 Pump, Water
| 02***91 | Seal, Rectangular Ring | 1 |
| 02***97 | Pump, Water | 1 |
| 02***13 | Screw | 2 |
U4-3-1 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 8 |
| 13***3Z | Bolt, M10 X 55 | 2 |
U5-6-1 Pipes, Oil Feed
| 02***73 | Adapter, Elbow | 2 |
| 02***45 | Hose, Lubrication Oil Feed | 2 |
| 02***47 | Adapter, Tee | 1 |
U5-1-1 Sump, Oil, & Fittings
| 02***20 | Sump, Oil | 1 |
| 02***22 | Washer, Seal | 1 |
| 02***24 | Pipe, Oil Suction | 1 |
U5-2-1 Pump, Oil
| 02***91 | Pump, Oil, Assembly | 1 |
| 02***32 | Screw | 4 |
U5-4-1 Filter, Oil & Cooler
| 02***28 | Head, Filter | 1 |
| 02***29 | Adapter, Filter Connector | 1 |
| 02***31 | Valve, Oil Pressure Relief | 1 |
U6-8-1 Pump, Fuel Lift
| 17***00 | Pump, Fuel Lift | 1 |
U6-1-1 Pump, Fuel Injection
| 02***44 | Gear, Injection Pump | 1 |
| 02***63 | Nut | 1 |
| 02***64 | Washer, Spring | 0 |
U6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
U6-3-1 Fuel Pipes, Injection Pump
| 02***61 | Bolt, Banjo | 1 |
| 02***66 | Adapter | 1 |
| 02***67 | Adapter, Tee | 1 |
U6-2-1 Injectors, Fuel, & Injection Pipes
| 02***91 | Seal | 7 |
| 02***92 | Seal | 1 |
| 02***38 | Bolt, Banjo | 6 |
U6-7-1 Filter, Fuel
| 02***50 | Element, Fuel Filter, Water Seperator | 1 |
| 02***52 | O Ring, Small | 1 |
| 02***53 | O Ring, Large | 1 |
U6-4-2 Fuel Pipes, Fuel Tank To Filter
| 02***96 | Bolt, Banjo | 1 |
| 02***97 | Washer, Seal | 2 |
| 02***71 | Adapter, Reducing | 1 |
U6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***28 | Nut | 2 |
| 02***64 | Olive | 4 |
| 02***57 | Adapter | 2 |
U6-6-2 Filter, Fuel Sediment
| 14***11 | Seal, Bonded | 2 |
| 32***01 | Element, Fuel Filter | 1 |
| 32***02 | Ring, Retaining | 1 |
U7-1-1 Turbocharger
| 02***07 | Seal | 1 |
| 02***12 | Bearing | 2 |
| 02***13 | Ring, Retaining | 4 |
U7-3-1 Compressor
| 02***46 | Cover, Air Compressor | 1 |
| 02***49 | O Ring | 1 |
| 02***50 | Compressor, Air | 1 |
U7-4-1 Compressor Pipework
| 02***83 | Clip, Jubilee | 4 |
| 02***84 | Adapter, Elbow, 3/8"Nptf | 1 |
| 02***85 | Connector, Water Pipe | 1 |
U7-5-1 Compressor, & Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
U7-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
U7-2-1 Turbo Pipework
| 02***46 | O Ring | 2 |
| 02***63 | Hose, Turbo Oil Feed | 1 |
| 02***65 | O Ring | 2 |
U8-1-1 Gasket Set, Top Overhaul
| 02***28 | Kit-Gasket, Top Overhaul | 1 |
U8-2-1 Gasket Sets, Bottom Overhaul
| 02***29 | Kit-Gasket, Bottom Overhaul | 1 |
FASTRAC 3155 serial number reference
Locate the machine identification plate on the JCB Fastrac 3155. Confirm the serial number falls within the sourced ranges (00640001–00641999 or 00642001–00643010). Verify applicability with a JCB dealer if the serial number format or configuration (e.g., ABS) is unclear.
| Prefix | Identifies | Notes |
|---|---|---|
| 00640001-00641999 | Applicability: JCB Fastrac 3155 (Standard). Source: JCB Service Manual the OEM part reference. | Verify with dealer if machine is ABS-equipped. |
| 00642001-00643010 | Applicability: JCB Fastrac 3155 (Standard). Source: JCB Service Manual the OEM part reference. |
Frequently asked questions
What engine does the JCB Fastrac 3155 use?
The JCB Fastrac 3155 uses a Perkins 1000-6 T4 turbocharged diesel engine with 6 cylinders, displacing 365.2 ci (6.0 L) and producing 168 hp (125.3 kW).
What is the operating weight of the JCB Fastrac 3155?
The operating weight of the JCB Fastrac 3155 is 14,916 lb (6765 kg).
What model replaced the JCB Fastrac 3155?
The JCB Fastrac 3170 succeeded the Fastrac 3155 in the lineup, offering higher horsepower.
What FASTRAC 3155 owners discuss
What engine powers the JCB FASTRAC 3155 and what are its key performance specifications?
The JCB FASTRAC 3155 is powered by a Perkins 1000-6 T4 turbocharged diesel engine. It is a 6-cylinder, liquid-cooled unit with a displacement of 365.2 cubic inches (6.0 liters). The engine produces 168 horsepower (125.3 kW) at 2400 rpm and 444.0 lb-ft (602.1 Nm) of torque at 1400 rpm. The bore and stroke are 3.937 x 5.00 inches (100 x 127 mm). The fuel tank capacity is 92.5 gallons (350.1 liters).
How is the transmission configured and what are the common operational complaints?
The FASTRAC 3155 uses a 36-speed mechanical gearbox providing 36 forward and 12 reverse gears. Community consensus notes that the gearbox is difficult to operate, particularly for grain cart work, requiring dropping 1 or 2 splits between changing mechanical gears. The 3230 and 3220 models are cited as having more robust gearboxes than the 3185, implying the 3155 shares similar mechanical limitations. The transmission is described as durable but not ideal for high-speed draft work compared to Vario-equipped models.
What are the typical undercarriage and wear patterns for this machine type?
The FASTRAC 3155 features outboard dry disc brakes. A known wear pattern involves the disc brake pad calipers seizing, which can lead to overheating and potential fires. The park brake is also noted as problematic. The drive train Universal Joints (UJs) and Spicer joints are prone to failure if not regularly greased; these failures can be expensive and may wipe out lower casings. The PUH (Power Take-Off) linkage can seize if a demount sprayer is used continuously.
What electrical or sensor issues are commonly reported by owners?
Owners report frequent failures of the electric spool valves on 'plus' models (identified by short gear levers and electric spools). These valves can stop working entirely, with replacement costs cited as high; some owners have converted these to manual spools to avoid expense. Additionally, early FASTRAC models (pre-2000) had a reputation for electrical fires due to wiring harnesses using very few wire colors, making troubleshooting difficult. Cab air conditioning switches also fail, leading to operator discomfort.
What is the consensus on the FASTRAC 3155's suitability for field work versus road work?
The FASTRAC 3155 is widely regarded as excellent for road work due to its comfort, speed, and outboard brakes which avoid oil contamination. However, it is generally not rated for heavy field work. Complaints include a poor turning circle requiring three-point turns on headlands, limited view of the drawbar, and insufficient draft power compared to conventional tractors. It is considered a 'one-driver' machine that requires patience and regular maintenance.
What specific issues should be checked when buying a used FASTRAC 3155?
When inspecting a used FASTRAC 3155, check the clutch for 'snatching' or jumping when hot, which may indicate hydraulic assist issues. Verify the condition of the internally mounted hydraulic slave cylinder, which is difficult to access (requiring engine or gearbox removal). Test all electric spool valves for functionality. Check for brake caliper seizure and ensure the drive train UJs and Spicer joints are well-greased. Inspect the cab air conditioning and electrical connections for corrosion or failure.
What are the safety-critical brake system risks associated with this model?
The outboard dry disc brakes on the FASTRAC 3155 are prone to caliper seizure. Seized calipers can cause excessive heat buildup, leading to brake pad degradation and potential fires. Have your dealer verify the brake system operation and caliper movement before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 3155. Related factory variants of the same model family:
FASTRAC 3155
Need a specific FASTRAC 3155 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.