JCBagriculturalfastrac
Jcb FASTRAC 2155
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 2155 is a high-speed, four-wheel-drive agricultural tractor manufactured from 2007 to 2014. It replaced the Fastrac 2150 and was succeeded by the Fastrac 8000 series. The machine is powered by a 119 kW (160 hp) JCB diesel engine, with some sources citing up to 240 hp for specific 4WS configurations. Operating weight ranges from 7.3 tonnes to 10.5 tonnes gross vehicle weight depending on configuration. It features a 6-speed gearbox with 2 powershift stages and a maximum travel speed of 60 km/h. Configurations offered include 2WS and 4WS variants, with options for front hydraulics, front PTO, and ISO Bus compatibility.
Across its production run, the Fastrac 2155 evolved from the earlier 2000 series platform, introducing improved engine management and transmission durability. The machine remains significant in the used market due to its robust JCB engine and Powershift transmission, which are widely supported by aftermarket parts. The 4WS variant is particularly sought after for its maneuverability in tight farmyards. Maintenance parts for the 2155 are readily available, making it a cost-effective option for farmers requiring a high-speed utility tractor.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 2155 specifications
Engine
| Model/Type | Cummins QSB6.7 |
| Gross/Net Power | 119 kW (160 hp) |
| Displacement | 6.7 L |
| Cylinders | 6 |
| Emissions Tier | Tier 4 Final / Stage V |
Weights
| Operating Weight | 7.3 t (16,094 lb) |
Dimensions
| Transport Length | 5.21 m (17.09 ft) |
| Transport Width | 2.35 m (7.71 ft) |
| Transport Height | 2.88 m (9.45 ft) |
| Wheelbase | 2.946 m (9.67 ft) |
| Ground Clearance | 464 mm (18.27 in) |
Performance
| Travel Speed | 60 km/h (37.28 mph) |
| Transmission | 54/18 Powershift |
| Maximum Drawbar Pull | 22 kN (4,952 lbf) |
Service capacities (summary)
| Fuel Tank | 500 L (132.1 gal) |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb FASTRAC 2155 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the FASTRAC 2155 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil and hydraulic fluid condition at every 10-hour interval. Check the fuel pre-filter for water contamination daily. Analyze transmission oil for metal particles at 500-hour intervals. Inspect coolant concentration and cleanliness annually. Check the hydraulic suction strainers for debris during fluid changes. Monitor brake fluid levels and condition for moisture ingress.
Corrective & Common Repairs
Replace engine air filter elements at 1000-hour intervals or when restriction indicators show. Clean the radiator and coolers regularly to prevent overheating. Check and adjust wheel nut torques at 500-hour intervals. Inspect brake pads for wear and replace as needed. Check fan belt tension and condition. Replace hydraulic filter elements at 250-hour intervals.
Overhaul & Rebuild Points
Drain and refill coolant at 2000-hour intervals. Change hydraulic fluid and clean suction strainers at 2000-hour intervals. Inspect steering swivel joints and rear anti-roll bar ball joints at 2000-hour intervals. Check rear suspension cylinder pivots for wear. Inspect front 3-point linkage cross-shaft and rams. Verify ECU diagnostic codes for transmission and engine faults.
Seasonal & Environment Servicing
Check air conditioning and heater filters annually. Inspect all hydraulic hose connections for leaks in cold weather. Check 4WS sensor operation if fitted. Inspect ABS harness and connections if fitted. Verify ECU diagnostic error codes. Check battery electrolyte level and clean terminals. Inspect propshaft and PTO drive shaft bearings for wear.
FASTRAC 2155 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925763 | Element, Fuel Water/Sediment, Filter Cartridge | Fuel system service | Check fitment → |
| 02/912540 | Head, Fuel Filter | Fuel system service | Check fitment → |
| 332/U7903 | Filter, Fuel Sediment, Assembly Abi | Fuel system service | Check fitment → |
| 32/925922 | Adapter, Fuel Filter | Fuel system service | Check fitment → |
| 32/920700 | Filter, Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 2155 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| D021 | Transmission sensor malfunction | Faulty transmission speed sensor or damaged wiring harness | Inspect transmission speed sensor and wiring for damage or loose connections |
| T060 | Hydraulic system fault | Low hydraulic fluid level or faulty pressure sensor | Check hydraulic pressure sensors and fluid levels |
| D0230 | Brakes warning | Brake system fault or low fluid level | Check foot brake fluid level and trailer air tank |
| P0100 | AMF High Side Driver fault | Open circuit or short circuit to battery in the driver circuit | Check AMF high side driver circuit for open or short circuits |
| P0101 | MAF Sensor Fault | Mass Air Flow sensor malfunction | Inspect MAF sensor and connections |
| P0102 | MAF Low Voltage Fault | MAF sensor low voltage signal | Check MAF sensor wiring and voltage supply |
| P0103 | MAF High Voltage Fault | MAF sensor high voltage signal | Check MAF sensor wiring and voltage supply |
| P0335 | Crankshaft Position Sensor Circuit Fault | No signal or signal fault from crank sensor | Inspect crankshaft position sensor and wiring |
| P0336 | Crank Sensor Signal Fault | Crank signal overspeed or signal fault | Inspect crankshaft position sensor and wiring |
| P029B | Injector drift fault detection on Injector 2 | Injector 2 MDP trim exceeds maximum calibrated threshold | Inspect Injector 2 and related wiring |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
FASTRAC 2155 attachments & work tools
Three-Point Hitch & Coupling Systems
The JCB Fastrac 2155 utilizes a Category III three-point hitch system. Compatible aftermarket coupling components include Walterscheid Category III rail systems with an OEM rail size of W=329/32/25 mm. Maximum total weight for the towing vehicle is listed as 9,000 kg in attachment compatibility data.
Power Take-Off (PTO)
The tractor is equipped with a standard PTO offering speed options of 540 rpm and 1000 rpm. Optional front PTO drive shafts and transfer boxes are available, with specific service sections dedicated to front PTO transfer gearbox oil checks and bearing maintenance.
Front Loader Compatibility
Front loader attachment compatibility specifies a maximum lift height of 4.2 m and a capacity of 3,500 kg. The machine's hydraulic system supports this with a maximum pressure of 210 bar and a pump flow rate of 140 l/min.
Backhoe Compatibility
Backhoe attachment specifications for this model indicate a digging depth of 4.5 m and a reach of 6.8 m. These dimensions define the operational envelope for rear-mounted excavation equipment compatible with the chassis.
Hydraulic Control Systems
The machine features a closed-center hydraulic system with load-sensing control and four hydraulic remote outlets. Electronic draft control is available via an Electronic Control Unit (ECU), with hydraulic circuits detailed for both mechanically and electronically actuated spool valves.
Optional Equipment & Configurations
Factory and aftermarket options include extra weights, tracks, and cab kits. The 4WS (Four-Wheel Steering) configuration is a distinct variant with specific service requirements for rear axle differential oil and hub oil changes.
All FASTRAC 2155 assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 2155. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-20-1 P.T.O Drawbar, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
A3-13-1 Top Link Assembly, Eye End, Cat Iii
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-15-1 Stabiliser, Standard Compression
| 33***96 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-4-1 Front Pto Frame, Utility
| 13***2D | Setscrew | 8 |
| 13***3D | Nut, M16 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 8 |
A3-15-2 Stabiliser, Short
| 33***97 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-13-2 Top Link Assembly, Hook End, Cat Iii
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
A3-19-1 Towing Hook
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***91 | Pin, Retaining | 1 |
A3-20-3 P.T.O Drawbar, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
A3-30-1 Rear Deck
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***7D | Bolt, M8 X 75mm Long | 2 |
| 13***3D | Bolt, M16x130, Dacromet | 2 |
A3-21-4 Ladder Hitch, Pto Drawbar, Fixed Offsetable With Cushioning,Italian
| 13***4D | Bolt, M20 X 60mm | 4 |
| 13***9D | Bolt, M20 X 90, Dacromet | 4 |
| 13***0D | Bolt, M20 X 100 | 2 |
A3-22-3 Trailer Coupling,, Ladder Hitch, 38mm, Rockinger 860d
| 33***21 | Coupling, Trailer Towing, Rockinger 860d01 | 1 |
| 33***34 | Kit-Lever | 1 |
| 33***35 | Kit-Spring | 1 |
A3-18-1 Drawbar,Assembly
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-11-1 Pickup Hitch
| 14***0Z | Washer, Plain | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-12-1 Top Link Assembly, Eye End, Cat Ii
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-23-1 Roller Drawbar, Heavy Duty, Australian & New Zealand Builds
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-22-2 Trailer Coupling,, Ladder Hitch, 38mm, Rockinger 840ra
| 47***15 | Nipple, Grease - Drive In | 2 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-17-1 Cat 2-3 Components
| 33***46 | G.A, Front Linkage Common, Parts | 1 |
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
| 47***07 | Ball, Cat 3-2 | 1 |
A3-2-2 Front Din Plate, Weight Carrier, Single
| 48***72 | Pin, Lynch | 3 |
| 48***04 | Pin, Spiral | 4 |
| 48***05 | Pin, Locking | 2 |
A3-3-1 Front Lower Links, Cat 2
A3-16-1 Lower Links, Cat 2
| 47***46 | Link, Assembly, Lower, Left Hand, Cat 2 | 1 |
| 47***47 | Link, Lower, Cat.2, Right Hand | 1 |
| 47***07 | Kit-Repair, Cat2 Link | 1 |
A3-13-3 Top Link Assembly, Hook End, Cat Iii
| 33***04 | Link, Top Assembly, Cat 3 Hook End | 1 |
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
A3-1-1 Weight Tray Assembly, Front, No Hitch
| 13***2D | Setscrew | 8 |
| 13***1D | Nut | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 8 |
A3-12-3 Top Link Assembly, Hook End, Cat Ii
| 33***04 | Link, Top Assembly, Cat 3 Hook End | 1 |
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
A3-21-3 Ladder Hitch, Pto Drawbar & Piton, Fixed Offsetable With Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 5 |
A3-10-1 Hitch, Rear
| 13***5D | Setscrew, M8x20 | 4 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-21-2 Ladder Hitch, Pto Drawbar, Fixed Offsetable With Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-30-2 Rear Deck, Weight Carrier
| 13***5Z | Bolt, M12x20 | 2 |
| 13***3Z | Bolt | 4 |
| 13***9Z | Bolt | 4 |
A3-22-1 Trailer Coupling,, Ladder Hitch, 30mm, Rockinger 850rb
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-5-1 Top Link, Front
| 47***00 | Link, Top | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-14-1 Lift Rod Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-21-1 Ladder Hitch, Assembly, Rockinger
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-2-1 Hitch Assembly, Front
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***4D | Bolt, M20 X 60mm | 8 |
| 13***8D | Bolt, M20 X 80mm | 2 |
A3-22-4 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-20-2 P.T.O Drawbar, With Piton, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-10-2 Hitch, Rear, Linkage
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***9Z | Bolt, M20 X 90 | 3 |
| 13***0Z | Bolt, M20 X 100mm | 1 |
A3-12-2 Top Link Assembly, Hook End, Cat Ii
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
| 47***05 | Handle | 1 |
A3-1-2 Weight Tray Assembly, Front, With Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 33***46 | G.A, Front Linkage Common, Parts | 1 |
A3-16-2 Lower Links, Cat 3
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***08 | Kit-Repair, Cat3 Link | 1 |
A3-23-2 Roller Drawbar, Heavy Duty
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
B Bodywork, Cab, Loader End
B1-6-1 Fenders, Front
| 13***0D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 6 |
| 13***9D | Screw, M12x35mm Long | 4 |
B1-1-11 Chassis Crossmember, Front, No Pto
| 13***3D | Bolt | 2 |
| 13***6D | Bolt | 2 |
| 13***3D | Nut, M16 | 4 |
B1-4-3 Step, Cab Access, Left Hand
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
| 13***8D | Setscrew, M10 X 30 | 14 |
B1-1-1 Chassis & Fittings
| 13***5D | Bolt | 4 |
| 13***6D | Bolt, M12x70 | 10 |
| 13***3D | Nut, M12 | 14 |
B1-6-2 Fenders, Rear
| 13***0D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***8D | Setscrew, M10 X 30 | 8 |
B1-2-1 Tank, Hydraulic, 2ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
B1-5-1 Bonnet & Fittings
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-8-1 Light Mounting Bars
| 13***9D | Screw, M12x35mm Long | 8 |
| 13***3D | Nut, M12 | 8 |
| 14***9D | Washer, M12 | 16 |
B1-5-2 Bonnet & Fittings, Utility (Orange)
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-6-3 Fender Extensions, Front, Optional
| 13***7Z | Screw, M6 X 25mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
B1-6-4 Fender Extensions, Rear, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 2 |
| 13***2Z | Bolt, M16 X 50mm | 4 |
B1-3-1 Tank, Diesel Fuel
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 9 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
B1-4-1 Pannier Unit, Right Hand
| 13***7D | Setscrew, M8x25 | 13 |
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
| 13***8D | Bolt, M8x30mm | 1 |
B1-1-12 Chassis Crossmember, Front, With Pto
| 13***0D | Bolt, M12 X 40 | 4 |
| 13***3D | Bolt | 2 |
| 13***6D | Bolt | 2 |
B1-4-2 Toolbox
| 12***71 | Padlock | 1 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 4 |
B1-7-1 Quiet Build Kit
| 13***5Z | Bolt | 17 |
| 13***3Z | Nut, Self Lock, M6 | 8 |
| 14***1D | Washer, Large | 8 |
B1-2-2 Tank, Hydraulic, 4ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
B2-9-2 Soundproofing, Cab Base
| 14***1D | Washer, Large | 27 |
| 14***2D | Washer, Large | 7 |
| 26***00 | Clip | 1 |
B2-6-2 Filter, Air Conditioning
| 32***00 | Filter, Carbon, Cab Intake | 1 |
| 32***00 | Filter, Air | 1 |
| 47***77 | Filter, Air Conditioning | 1 |
B2-11-6 Seat Suspension Unit, High-Spec, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-4-10 332/R6196, Left Side, Door Gas Strut, Service Modification
| 13***1D | Setscrew, M8x45 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 33***15 | Clevis Pin | 1 |
B2-10-1 Mirrors, External
| 13***7D | Setscrew, M8x25 | 6 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***7D | Washer, M8 Plain | 6 |
B2-11-16 Seat Suspension Unit, High-Spec, Bottom, Heated
| 40***14 | Washer | 2 |
| 40***22 | Bracket | 1 |
| 40***23 | Kit-Cable Connecting | 1 |
B2-11-3 Seat, Suspension, Standard
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-11-21 Seat, Passenger
| 40***14 | Washer | 2 |
| 40***86 | Kit-Headrest, Dynamic Yellow | 1 |
| 40***10 | Screw | 7 |
B2-9-1 Soundproofing, Cab
| 24***05 | Grommet | 1 |
| 24***12 | Grommet | 1 |
| 24***14 | Grommet | 1 |
B2-1-2 Cab Assembly, Utility (Orange)
| 13***0D | Bolt, M20 X 100 | 4 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
| 33***33 | Roof, Cab, Without Hatch, Orange | 1 |
B2-2-1 Cab Shell, Hardware
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 2 |
| 13***3D | Nut, Self Lock M8 | 8 |
| 14***7D | Washer, M8 Plain | 8 |
B2-4-1 Door, Left Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B2-6-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***1Z | Nut, M5-8 | 4 |
B2-11-5 Seat Suspension Unit, Standard, Top
| 40***05 | Kit-Lever Locking | 1 |
| 40***06 | Kit-Isolator | 1 |
| 40***07 | Kit-Handle | 1 |
B2-4-21 Door, Left Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B2-11-2 Seat, Suspension, High-Spec
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-11-14 Seat Suspension Unit, High-Spec, Top, Heated
| 40***07 | Kit-Handle | 1 |
| 40***08 | Guide | 1 |
| 40***09 | Handle | 1 |
B2-8-1 Ducts, Mouldings, Floormat & Covers, Fig.1
| 12***31 | Vent, Air Register | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***3Z | Screw, M6x16 | 20 |
B2-4-22 Door, Right Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B2-7-1 Cab, Console, Instrument Panel, Covers & Brackets
| 12***31 | Vent, Air Register | 4 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***5Z | Bolt | 0 |
B2-3-1 Cab Glazing
| 33***38 | Glass, Rear Quarter Light, Left Hand | 1 |
| 33***10 | G.A, Parts To Complete, Cab Tier 3 | 1 |
| 33***72 | Glass, Front Windscreen | 1 |
B2-11-12 Seat, Suspension, High-Spec, Heated
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-3-2 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-12-1 Seat Belt
| 47***00 | Kit-Seat Belt, Lap Type, Kit-Seat Belt, Lap Type; Drivers Seat. Contains All Parts Necessary For Installation. | 2 |
| 47***00 | Kit-Seat Belt, Lap Type | 1 |
B2-11-7 Seat Suspension Unit, Standard, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-10-2 Mirrors, External
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 47***65 | Arm, Mirror, Left Hand | 1 |
B2-8-2 Ducts, Mouldings, Floormat & Covers, Fig.2
| 13***5D | Screw, M5x20 | 7 |
| 14***5D | Washer | 7 |
| 26***01 | Net, Stowage | 1 |
B2-4-2 Door, Right Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B2-1-1 Cab Assembly
| 13***0D | Bolt, M20 X 100 | 4 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
| 33***96 | Cab, Assembly, No Hatch A.B.I | 1 |
B2-10-3 Visor, Sun
| 33***72 | Visor, Sun | 1 |
| 47***55 | G.A, Cab Fittings | 1 |
| 82***72 | Screw, M5 X 16 | 3 |
B2-9-3 Soundproofing, Cab Base
| 14***1D | Washer, Large | 22 |
| 14***2D | Washer, Large | 7 |
| 33***70 | Panel, Insulation, Floorplate, Left Side | 1 |
B2-4-12 332/R5667, Right Side, Door Gas Strut, Service Modification
| 13***1D | Setscrew, M8x45 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 33***15 | Clevis Pin | 1 |
B2-11-1 Seats, Suspension, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut | 2 |
| 13***1Z | Nut, M8 | 2 |
B2-11-18 Seat Suspension, Kit Wear Parts, High Spec Heated
| 40***14 | Washer | 1 |
| 40***49 | Roller | 1 |
| 40***51 | Screw | 1 |
B2-5-1 Window, Rear Opening
| 13***5D | Setscrew, M6 X 20mm Long | 6 |
| 13***3Z | Nut | 2 |
| 13***1D | Nut, Plain | 7 |
B2-11-4 Seat Suspension Unit, High-Spec, Top
| 40***03 | Kit-Level Control | 1 |
| 40***04 | Kit-Upper Suspension | 1 |
| 40***05 | Kit-Lever Locking | 1 |
B5-4-1 Decals, North American, Homologation
| 33***35 | Decal, Warning Trailer Towi, Trailer Towing | 1 |
| 33***03 | Decal, Warning, Read Manual | 1 |
| 47***30 | G.A, H/Book & Labels-Usa | 1 |
B5-1-1 Decals, External
| 13***3D | Nut, M6 Lock | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 33***58 | Decal, Speed 60kph | 1 |
B5-2-1 Decals, Internal
| 33***52 | Decal, Speed 60km/H | 1 |
| 33***93 | Decal, Hydraulic Lever, 4 Spool | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
B5-9-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-10-1 Lubricants & Filters
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
| 32***13 | Element, Engine Oil Filter, Cartridge | 1 |
B5-5-1 Labels, Safety, Iso
| 33***60 | Label, Sheet, Fastrac Iso | 1 |
| 81***72 | Plate, Homologation | 1 |
| 81***38 | Decal, 40 Kph | 1 |
B5-6-1 Labels, Safety, Usa, Ansi
| 33***88 | G.A, Handbook & Labels, Ansi Safety Usa | 0 |
| 33***59 | Label, Sheet, Fastrac Ansi | 1 |
| 81***82 | Label, Warning, Drawbar | 1 |
B5-3-4 Homologation, Italian 40k
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
B5-1-0 Identification, Serial Plates
C Electrics-Machine, Cab & Engine
C1-10-2 Radar Installation
| 13***3D | Setscrew | 3 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-4-1 Light, Head, Left Hand Dip
| 33***24 | G.A, Light - Lh Dip Ga | 1 |
| 70***92 | Light, Head 12v Assembly, L/H Dip L/H Mounted | 1 |
| 70***93 | Light, Head 12v Assembly, L/H Dip R/H Mounted | 1 |
C1-3-10 Harness Assembly, Accessories
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 90 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***7D | Screw, M6 X 25mm | 1 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 33***10 | G.A, Parts To Complete, Cab Tier 3 | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-3-5 7 Pin Trailer Socket, Sae Single
| 13***5D | Screw, M5x20 | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
C1-6-1 Light, Rear Fog
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-3-1 Harnesses, Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***8D | Bolt, M6 X 30 | 1 |
C1-11-2 Harness Connectors, Repair Ip67 Standard
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C1-1-1 Battery & Carrier, Single
| 13***5D | Setscrew, M8x20 | 1 |
| 13***5D | Screw, M12 X 20mm Long | 1 |
| 13***2D | Bolt | 1 |
C1-9-1 Horn, Single Tone
| 13***6Z | Bolt, M6x70 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***1Z | Washer | 2 |
C1-7-1 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-3-6 7 Pin Trailer Socket, Single, Front
| 13***3D | Nut, Lock M5 | 3 |
| 13***5D | Capscrew, M5 X 65. 12.9 | 3 |
| 14***5D | Washer | 3 |
C1-3-3 Harnesses, Edc
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***2Z | Nut, Thin M20 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-3-11 Non Abs Axle, Electrics, Sealing Parts, ( Australian )
| 48***21 | G.A, Non Abs Sealing Part, Australian | 1 |
| 72***08 | Connector, Weatherpack Cavity, Seal, Green Packard | 13 |
| 72***54 | Housing, 2 Way Metripack, 150 Fm(Pin) | 1 |
C1-3-2 Harnesses, Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
| 24***14 | Grommet | 1 |
C1-5-2 Light, Combination, Rear, Italian Homologation
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 48***39 | G.A, Rear Light Cluster, With Fog Light Op. | 1 |
| 48***98 | G.A, Electrics | 1 |
C1-3-4 7 Pin Trailer Socket, Single
| 13***9D | Setscrew | 3 |
| 13***3D | Nut, Lock M5 | 3 |
| 47***00 | G.A, 7 Pin Trailer Socket | 1 |
C1-2-1 Electrical Equipment
| 14***11 | Seal, Bonded | 1 |
| 32***30 | Indicator, Assembly | 1 |
| 33***52 | Boot, Warning Buzzer | 1 |
C1-11-1 Harness Connectors, Sumitomo
| 72***16 | Terminal, Crimp | 2 |
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
C1-1-2 Battery & Fittings, Twin
| 13***5D | Setscrew, M8x20 | 2 |
| 13***2D | Bolt | 1 |
| 13***2D | Bolt, M12 X 50mm Long | 1 |
C1-1-3 Earth Lead, Chassis To Engine
| 13***5D | Screw, M12 X 20mm Long | 1 |
| 14***9D | Washer, M12 | 1 |
| 47***87 | G.A, Electrics-2170 S, T3 - Cummins 6.7l | 1 |
C1-4-2 Light, Head, Right Hand Dip
| 33***27 | G.A, Light - Rh Dip Ga | 1 |
| 70***94 | Light, Head 12v Assembly, R/H Dip L/H Mounted | 1 |
| 70***95 | Light, Head 12v Assembly, R/H Dip R/H Mounted | 1 |
C1-5-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C1-10-1 Radar Installation
| 13***3D | Setscrew | 3 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C2-6-2 Engine Block Heater, 240v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-6-1 Engine Block Heater, 120v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-3-1 Motor, Starter, 12.Volt
| 02***72 | Screw, 12 Point Cap | 3 |
| 71***01 | Motor, Starter | 1 |
C2-5-1 Alternator Mountings
| 02***07 | Bolt, M8x1.25x25 | 1 |
| 02***19 | Screw | 1 |
| 02***26 | Nut, Flange Head | 1 |
C2-4-1 Alternator
| 71***93 | Alternator | 1 |
C2-1-2 Module, Control Harness
| 02***56 | Clip | 6 |
| 02***57 | Clip | 3 |
| 02***82 | Screw | 3 |
C2-8-1 Earth Strap
| 13***5D | Screw, M12 X 20mm Long | 1 |
| 14***9D | Washer, M12 | 1 |
| 71***79 | Strap, Earth, 220mm Long; Superseded By 71***41 D.Jackson 08/12/06, San23096 (Greater Cross Sectional Area) | 1 |
C2-1-1 Module, Engine Control
| 02***74 | Screw, M8 X 45 | 3 |
| 02***64 | Screw | 1 |
| 02***93 | Screw | 8 |
C2-2-1 Switches & Sensors
| 02***79 | Screw | 1 |
| 02***81 | Screw, Socket Head | 1 |
| 02***08 | O Ring | 1 |
C2-7-1 Circuit, Induction Heater
| 13***3D | Screw, M5x16 | 4 |
| 13***3D | Setscrew | 3 |
| 13***5D | Screw, M12 X 20mm Long | 1 |
C3-5-1 Fuse Box, Relays, & Ecu Controllers, Rear 4ws Mechanical & Electric
| 13***3D | Screw, M5x16 | 3 |
| 13***5D | Screw, M5x20 | 4 |
| 13***3D | Setscrew | 2 |
C3-7-2 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C3-14-3 Power Supply, Auxiliary, With Convenience Socket, 4ws Builds
| 13***3D | Setscrew | 2 |
| 13***1D | Nut, Plain M5 | 1 |
| 14***6D | Washer, M6 Plain | 2 |
C3-1-1 Instrumentation, Front
| 24***02 | Grommet | 1 |
| 24***04 | Grommet | 2 |
| 24***02 | Grommet | 1 |
C3-5-2 Fuse Box, Relays, & Ecu Controllers, Rear 2ws Mechanical
| 13***3D | Screw, M5x16 | 3 |
| 13***5D | Screw, M5x20 | 7 |
| 13***3D | Setscrew | 2 |
C3-7-3 Ashtray & Lighter
| 33***81 | Ashtray | 1 |
| 33***81 | Plate, Ashtray Retaining | 1 |
| 60***3Z | Screw, Countersunk | 2 |
C3-10-1 Wash/Wipe, Windscreen
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***5D | Setscrew, M8x20 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
C3-12-1 Light, Head, Right Hand Dip, Auxiliary Lights Installation
| 24***04 | Grommet, Blind, 11.1mm | 2 |
| 33***30 | Bracket, Mounting, Auxiliary/Lights Left Hand | 1 |
| 33***46 | Bracket, Mounting, Auxiliary/Light Right Hand | 1 |
C3-2-1 Switches, Rear
| 24***09 | Grommet | 3 |
| 33***52 | Boot, Warning Buzzer | 1 |
| 33***31 | G.A, Air Con Installation | 1 |
C3-14-2 Power Supply, Auxiliary, Without Convenience Socket, 2ws Builds
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***53 | Bracket, Mounting, Power Supply | 1 |
C3-12-3 Light, Indicator, Side
| 14***4D | Washer, Plain M4 | 4 |
| 24***10 | Grommet | 2 |
| 47***35 | G.A, Elec Parts To Comple | 1 |
C3-6-1 Switch, Column
| 70***01 | Column, Switch Cap | 1 |
| 70***01 | Clamp | 1 |
| 70***00 | Switch, Column Indicator | 1 |
C3-3-2 Switch Panel, Draft Control
| 33***21 | Knob, Control, Setpoint Setting | 1 |
| 33***22 | Knob, Control | 2 |
| 33***23 | Lever, Main Lift Control; Supp No Changed From 1.532.000.002. Ref, R Bryant 21/04***05.P Gamble. | 1 |
C3-9-4 Air Conditioning, Unit Assembly
| 13***1Z | Screw, M4 X 12 | 7 |
| 13***3Z | Nut | 2 |
| 30***61 | Unit, Air Conditioning, Heater | 1 |
C3-9-3 Heater, Installation
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***8D | Bolt | 1 |
| 13***3D | Nut, M6 Lock | 1 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 64***00 | Tube | 0 |
| 71***01 | Jet, Windscreen Washer | 1 |
C3-3-11 Control Panel, 4ws Quadtronic
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***93 | Plate, Mounting, Switch Control | 1 |
C3-8-1 Radio, Optional
| 71***00 | Aerial | 1 |
| 71***01 | Speaker | 2 |
| 71***02 | Grille, Speaker | 2 |
C3-12-6 Light, Working, Auxiliary, 6 Front & 4 Rear
| 13***5D | Setscrew, M8x20 | 0 |
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 0 |
C3-2-2 Switches, Rear, & Spool Controllers, Electronic Valves
| 24***09 | Grommet | 3 |
| 33***52 | Boot, Warning Buzzer | 1 |
| 33***31 | G.A, Air Con Installation | 1 |
C3-7-1 Light, Interior, Cab
| 47***16 | Bracket, Mounting, Door Light Switch | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 70***00 | Switch, Door Light | 2 |
C3-14-4 Power Supply, Auxiliary, Without Convenience Socket, 4ws
| 33***03 | G.A, Ecu1 Installation | 1 |
| 33***93 | Plate, Mounting, Switch Control | 1 |
| 33***12 | G.A, Auxiliary Power Sup 4ws | 1 |
C3-12-2 Light, Working, Front & Rear
| 13***5D | Setscrew, M8x20 | 0 |
| 13***3D | Nut, Self Lock M8 | 0 |
| 14***7D | Washer, M8 Plain | 0 |
C3-3-1 Control Panel, With Rear Hitch
| 33***99 | Plate, Switch, A.G Panel | 1 |
| 47***46 | Nut, M4 Insert, Self Tapping | 6 |
| 48***05 | Switch, 4wd Power Take-Off, Assembly | 0 |
C3-14-1 Power Supply, Auxiliary, With Convenience Socket, 2ws Builds
| 13***3Z | Screw, M6x16 | 3 |
| 13***1Z | Nut, M5-8 | 1 |
| 14***6Z | Washer, M6 | 3 |
C3-5-10 Fuse Box, Conversion, Service Fix, 27 Way To 3 X 10 Way
| 13***3D | Screw, M5x16 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
| 14***5D | Washer | 2 |
C3-3-3 Switches & Sensor, Rear Hitch Control, External
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 1 |
C3-9-1 Air Conditioning, Cab
| 13***5Z | Bolt | 3 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***6D | Washer, M6 Plain | 3 |
C3-12-4 Lights, Front Combination, Auxiliary Light Installation
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Nut, Lock M5 | 4 |
| 14***5D | Washer | 4 |
C3-4-1 Fuse Box & Relays, Front
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-11-1 Washer Kit, Windscreen, Left Hand Cab Step Mounted
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
C3-13-1 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 33***43 | G.A, Cab Common Parts, Tier 3 | 1 |
| 47***52 | G.A, Machine Controls, & Instrumentation | 1 |
C3-12-7 Light, Working, Auxiliary, 6 Front & 4 Rear
| 13***7D | Screw, M6 X 25mm | 0 |
| 13***5D | Setscrew, M8x20 | 0 |
| 13***3D | Nut, Self Lock M8 | 0 |
C3-12-5 Light, Working, Auxiliary, 2/4 Front & 2/4 Rear
| 13***5D | Setscrew, M8x20 | 0 |
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 0 |
C3-9-2 Air Conditioning, Chassis
| 12***91 | Washer, Nylon | 4 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***2D | Bolt | 6 |
D Controls-Machine, Engine & Steering
D1-2-10 Gearshift, Air Assisted, Range Change, 4ws
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-2-3 Ram Assembly, Pneumatic Gearchange
| 47***62 | Elbow, 1/8" X 6mm | 3 |
| 47***88 | Nut | 2 |
| 47***91 | Clevis, Assembly | 2 |
D1-7-1 Controls, Hydraulic, 3 & 4 Mechanical Spool Valves
| 13***5Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-2-21 Gearshift, Air Assisted, Range Change, 2ws
| 13***2D | Bolt | 2 |
| 13***1D | Bolt, M10 X 45mm Long | 2 |
| 13***1D | Nut, Plain M5 | 2 |
D1-2-1 Gearshift, Air Assisted, Range Change, 2ws
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-11-1 Contr0l, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***3Z | Nut | 2 |
D1-2-11 Valve, Air, 4ws
| 47***69 | Adapter, Straight Connector | 1 |
| 47***05 | Adapter, Elbow | 2 |
| 47***00 | Valve, Air, 4ws | 1 |
D1-5-1 Control, Hydraulic, 3 & 4 Spool, Electronic Valves
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***09 | Plate, Spool Pod Cover | 1 |
D1-3-1 Brake, Parking
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
| 33***14 | Valve, Handbrake, Colour Black | 1 |
D1-2-22 Gearshift, Air Assisted, Range Change, 4ws
| 13***9D | Bolt, Special M6x90 | 2 |
| 13***1D | Bolt, M10 X 45mm Long | 2 |
| 13***1D | Nut, Plain M5 | 2 |
D1-2-2 Valve Assembly, Pneumatic
| 25***48 | Valve, Manifold Assembly, 4 Station | 1 |
| 47***67 | Manifold, 4 Station | 1 |
| 47***69 | Adapter, Straight Connector | 8 |
D1-10-1 Control, Valve Flow, Mechanical
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***31 | Screw, Grub | 2 |
D1-4-1 Controls, Brake & Clutch
| 13***5Z | Bolt | 1 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
D1-12-1 Control, Pick Up Hitch
| 13***3Z | Screw, M6x16 | 2 |
| 14***9Z | Washer | 1 |
| 23***20 | Knob, Control Lever | 1 |
D1-1-1 Gearshift, 5 Or 6 Speed Gearbox
| 12***02 | Plate, Compression | 2 |
| 13***3Z | Screw, M6x16 | 1 |
| 13***5Z | Bolt | 6 |
D1-13-1 Control, Ladder Hitch Release
| 13***3Z | Screw, M6x16 | 4 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***9Z | Washer | 1 |
D1-9-1 Control, Valve Flow, Electronic
D2-2-1 Control, Throttle, Foot
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, M6 Lock | 4 |
D2-1-1 Control, Hand Throttle
| 13***3D | Bolt, M4 X 16 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
| 14***6D | Washer, M6 Plain | 8 |
D3-1-1 Steering Wheel, Installation
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 4 |
E Hydraulics & Air Including, Steering
E1-13-1 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray (Mechanical Valves)
| 13***3Z | Nut | 1 |
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 33***70 | Cap, Qrc (Double), Faster Tarv | 1 |
E1-6-1 Circuit, Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-9-3 Circuit, Auxiliary, 4 Spool, Rear, Mechanical Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 11 |
| 33***01 | G.A, Mech Spool Common | 1 |
E1-1-1 Circuit, Neutral, Mechanical Valves, 2ws
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***7Z | Capscrew, M8x25mm | 4 |
E1-15-2 Circuit, Auxiliary, Free Flow Return, Rear, Electronic Valves
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***5Z | Nut | 1 |
E1-20-2 Circuit, Flow Divider, Rear, Without Trailer Brake Valve
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***9D | Bolt | 2 |
E1-17-1 Circuit, Rear Suspension 2ws
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***0D | Bolt, M6x100mm | 3 |
E1-4-2 Circuit, Steering, 4ws, (Fig.2)
| 13***9D | Bolt, Special M8x90 | 2 |
| 13***6D | Bolt, M16 X 70mm | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-16-2 Circuit, Auxiliary, Free Flow Return, Front, Electronic Valves
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 5 |
| 13***5Z | Nut | 1 |
E1-2-2 Circuit, Transmission
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***1D | Setscrew, M8x45 | 1 |
E1-21-2 Qr Drain Couplings, With Drip Tank, Installation
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
E1-16-1 Circuit, Auxiliary, Free Flow Return, Front, Mechanical Valves
| 13***7D | Setscrew, M8x25 | 5 |
| 13***5Z | Nut | 1 |
| 13***3D | Nut, Self Lock M8 | 5 |
E1-10-2 Circuit, Auxiliary, 4th Spool, Rear, Mechanical Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 3 |
| 33***59 | Hose, 1/2"Bsp 660mm | 1 |
E1-9-2 Circuit, Auxiliary, 3 Spool, Rear, Electronic Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 11 |
| 33***59 | Hose, 1/2"Bsp 660mm | 1 |
E1-5-1 Circuit, Differential Lock
| 16***50 | Adaptor | 1 |
| 24***03 | O Ring | 1 |
| 33***59 | G.A, Suspension Charge, Valve | 1 |
E1-12-2 Circuit, Auxiliary, 3 Spool, Front Hitch, (Electronic Valves)
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Bolt | 1 |
| 13***3D | Nut, Back | 1 |
E1-2-11 Circuit, Transmission Cooler
| 13***7D | Setscrew, M8x25 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
E1-21-1 Qr Drain Couplings, With Drip Tank, Installation
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
E1-14-1 Circuit, Auxiliary, 4 Spool, Front, With Pto Frame
| 23***06 | O Ring, 3/8"Bsp | 6 |
| 33***47 | Cap, Qrc, Faster Tarv | 2 |
| 33***70 | Cap, Qrc (Double), Faster Tarv | 1 |
E1-1-11 Circuit, Neutral, Mechanical Valves, 4ws
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***7D | Capscrew | 4 |
E1-11-1 Circuit, Auxiliary, 3 Spool, Front, With Weight Tray, (Mechanical Valves)
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E1-9-1 Circuit, Auxiliary, 3 Spool, Rear, Mechanical Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 11 |
| 33***01 | G.A, Mech Spool Common | 1 |
E1-7-1 Circuit, Front Hitch
| 13***8D | Bolt, M8x30mm | 1 |
| 13***3D | Bolt | 1 |
| 13***8D | Bolt | 1 |
E1-12-1 Circuit, Auxiliary, 3 Spool, Front Hitch, (Mechanical Valves)
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3Z | Nut | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
E1-15-1 Circuit, Auxiliary, Free Flow Return, Rear, Mechanical Valves
| 13***7D | Setscrew, M8x25 | 2 |
| 13***5Z | Nut | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-10-1 Circuit, Auxiliary, 4th Spool, Rear, Mechanical Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 3 |
| 33***01 | G.A, Mech Spool Common | 1 |
E1-20-1 Circuit, Flow Divider, Rear, With Trailer Brake Valve
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***9D | Bolt | 2 |
E1-13-2 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray (Electronic Valves)
| 13***3Z | Nut | 1 |
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 33***70 | Cap, Qrc (Double), Faster Tarv | 1 |
E1-3-1 Circuit, 2/4wd, Front & Rear Pto
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-18-1 Circuit, Rear Suspension 4ws
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
E1-11-2 Circuit, Auxiliary, 3 Spool, Front, With Weight Tray, (Electronic Valves)
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Bolt | 1 |
| 13***3D | Nut, Back | 1 |
E1-2-1 Circuit, Transmission, Cooling
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
E1-4-1 Circuit, Steering, 2ws & 4ws (Fig.1)
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5D | Setscrew, M8x20 | 3 |
| 13***7D | Setscrew, M8x25 | 2 |
E1-1-12 Circuit, Neutral, Electronic Valves, 4ws
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, M6 Lock | 2 |
E1-1-2 Circuit, Neutral, Electronic Valves, 2ws
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, M6 Lock | 2 |
E1-9-4 Circuit, Auxiliary, 4 Spool, Rear, Electronic Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 11 |
| 33***59 | Hose, 1/2"Bsp 660mm | 1 |
E2-2-1 Pump, Main/Auxiliary, Hydraulic, 2ws
| 20***00 | Pump, Twin Main/Auxiliary, Hydraulic, 45cc,19cc | 1 |
| 20***23 | Coupling, Muff | 1 |
| 20***42 | Seal, Oil | 1 |
E2-3-1 Pump, Main/Auxiliary, Hydraulic, 4ws
| 20***65 | Pump, Triple Main/Auxiliary, Hydraulic 45.19.19cc | 1 |
| 20***19 | Retainer | 1 |
| 20***20 | Pin, Straight | 6 |
E2-1-1 Pump, Steer & Suspension
| 20***20 | Pump, Steering/Suspension | 1 |
| 20***18 | Seal, Oil, Radial Lip | 2 |
| 20***19 | Retainer | 1 |
E3-1-5 Valve, Assembly, Electronic 3 Spool, And Adapters
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***41 | Valve, Hydraulic, 3 Spool Electrionic | 1 |
E3-1-2 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-8-1 Valve, Control, 4ws
| 13***8Z | Capscrew, M5 X 30 | 4 |
| 25***00 | Valve, Solenoid | 1 |
| 25***01 | Coil | 2 |
E3-4-1 Valve, Section, Directional Control, With Flow Control
| 25***38 | Valve, Section, Directional, With Flow Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-7-1 Valve, Solenoid, Pressure Maintenance
| 13***0D | Setscrew | 4 |
| 13***2D | Capscrew, M8 X 120 Long, Grade 12.9 | 2 |
| 13***8Z | Capscrew, M5 X 30 | 0 |
E3-12-1 Filter, Hydraulic, Tank Mounted
| 32***04 | O Ring | 1 |
| 32***52 | Filter, Hydraulic, Assembly | 1 |
| 32***90 | Housing, Filter | 1 |
E3-13-2 Filter, Transmission Oil
| 33***54 | Element, Trans/Oil Filter | 1 |
| 33***56 | Filter, Transmission Oil, Assembly | 1 |
| 33***80 | Kit-Seal | 1 |
E3-2-1 Valve Section, Inlet, With Main Relief
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***45 | O Ring | 2 |
| 25***54 | Plug | 1 |
E3-3-11 Valve, Directional Control, Section
| 25***74 | Valve, Shuttle | 1 |
| 25***75 | Kit, Seals | 1 |
| 25***76 | Kit, Repair | 1 |
E3-1-3 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E3-9-1 Valve, Suspension Charge
| 25***96 | Cartridge, Unloading | 1 |
| 25***98 | Cartridge, Solenoid | 1 |
| 25***50 | Coil, 12v, Deutsch Connector | 1 |
E3-4-11 Valve, Directional Control, Section
| 25***74 | Valve, Shuttle | 1 |
| 25***75 | Kit, Seals | 1 |
| 25***76 | Kit, Repair | 1 |
E3-10-1 Valve, Flow Regulator, Diverter
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
| 25***72 | Kit-Seal | 1 |
E3-6-1 Valve, Main Relief, In-Line
| 25***18 | Valve, Main Relief, In-Line | 1 |
| 25***78 | Cartridge, Main Relief | 1 |
| 25***13 | Kit-Seal | 1 |
E3-3-1 Valve, Section, Directional Control
| 25***39 | Valve, Section, Directional Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-1-6 Valve, Assembly, Electronic 4 Spool, And Adapters
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***40 | Valve, Assembly, 4 Spool Ehs-2 | 1 |
E3-5-11 Valve, Draft Control, Section
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 1 |
| 25***66 | Plug | 2 |
E3-1-22 Valve Mountings, Electronic Valves
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M10 | 1 |
| 13***3D | Nut, M8 Locking | 2 |
E3-5-1 Valve, Section, Draft Control, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 2 |
| 25***40 | Valve, Section,, Draft Control | 1 |
E3-1-21 Valve Mountings, Mechanical Valves
| 13***8D | Screw, M8x30 | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***3D | Nut, Self Lock M10 | 2 |
E3-2-11 Valve, Endplate, Section
| 25***54 | Plug | 1 |
| 25***66 | O Ring | 1 |
| 25***69 | Filter | 1 |
E3-13-1 Filter, Transmission Oil
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E3-11-1 Valve, Steering
| 33***91 | G.A, Steering Hydraulic | 1 |
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
E4-4-1 Ram, Front Hitch, 80mm
| 48***47 | Nipple, Grease | 2 |
| 48***90 | Ram, Front Hitch, Assembly | 2 |
| 48***91 | Kit-Ram Seal | 1 |
E4-6-1 Power Track Rod
| 13***4D | Bolt | 4 |
| 13***8D | Bolt, M16 X 80mm | 4 |
| 33***90 | Ram, Assembly, 4ws Power Track Rod | 1 |
E4-5-1 Ram, Rear Hitch, 80mm
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
| 47***96 | Bearing, Assembly; Cbm Would Not Supply To Jcb.But Skf P/No, Gem 45 Es-2rs. Supplier Code 00220.San 09757 | 1 |
E4-1-1 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-3-1 Ram, Steering
| 33***91 | G.A, Steering Hydraulic | 1 |
| 47***25 | Gaiter | 2 |
| 47***29 | Nut, Hexagonal | 1 |
E4-2-1 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-2-2 Ram, Suspension, 'Cushioned', Optional 45mm Heavy Duty
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***13 | Cover, Protective Tube | 1 |
F Axles, Wheels & Transmission
F1-11-10 454/M2214, Front Axle, 4ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
F1-1-2 454/27000, Front Axle, 2ws, No Spin Differential
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***5Z | Bolt | 1 |
F1-14-2 454/09100, Differential Assy, Maxtrac, 4ws
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-12-3 Hub & Components, Front Left Hand 4ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-12-2 Hub & Components, Front Right Hand 4ws
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-11-12 454/M2217, Front Axle, 4ws, Maxtrac, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-3-1 454/28000, Drivehead Assembly, No Spin Differential, 2ws
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-11-2 454/27200, Front Axle, 4ws, No Spin Differential
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-13-1 454/28000, Drivehead Assembly, No Spin Differential, 4ws
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-11-4 454/30990, Front Axle, 4ws, No Spin Differential, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-11-1 454/27100, Front Axle, 4ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-4-1 454/07600, Differential Assy, No Spin, 2ws
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-3-2 454/27900, Drivehead Assembly, Maxtrac 2ws
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-12-4 Hub & Components, Front Right Hand 4ws
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-2-3 Hub & Components, Front Left Hand 2ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-1-3 454/30960, Front Axle, 2ws, Maxtrac, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***5Z | Bolt | 1 |
F1-11-11 454/M2215, Front Axle, 4ws, No Spin Differential, 454/M2215
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
F1-14-1 454/07600, Differential Assy, No Spin Differential 4ws
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-1-1 454/26900, Front Axle, 2ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***5Z | Bolt | 1 |
F1-2-2 Hub & Components, Front Right Hand 2ws
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-11-3 454/30980, Front Axle, 4ws, Maxtrac, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-1-4 454/30970, Front Axle, 2ws, No Spin Differential, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***5Z | Bolt | 1 |
F1-2-4 Hub & Components, Front Right Hand 2ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-2-1 Hub & Components, Front Left Hand 2ws
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-13-2 454/27900, Drivehead Assembly, Maxtrac 4ws
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-4-2 454/09100, Differential Assy, Maxtrac, 2ws
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-11-13 454/M2218, Front Axle, 4ws, No Spin Differential, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-12-1 Hub & Components, Front Left Hand 4ws
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-12-1 Hub & Components, Rear Left Hand 4ws
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-3-1 458/10680, Drivehead Assembly
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-2-2 Hub & Components, Rear Right Hand 2ws
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-12-4 Hub & Components, Rear Right Hand 4ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-13-2 Spacer Kit, 921/53500
| 92***00 | Kit-Spacer | 1 |
F2-2-1 Hub & Components, Rear Left Hand 2ws
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-11-2 454/31620, Rear Axle, 4ws, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***1D | Bolt, M16 X 45mm | 4 |
F2-12-3 Hub & Components, Rear Left Hand 4ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-11-11 454/M2219, Rear Axle, 4ws, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***1D | Bolt, M16 X 45mm | 4 |
F2-1-1 454/30810, Rear Axle, 2ws-Udh
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-1-2 454/31610, Rear Axle, 2ws-Udh, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-11-10 454/M2216, Rear Axle, 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***1D | Bolt, M16 X 45mm | 4 |
F2-2-3 Hub & Components, Rear Left Hand 2ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-14-1 454/12400, Differential Assy
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-11-1 454/30420, Rear Axle, 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***1D | Bolt, M16 X 45mm | 4 |
F2-4-1 454/12400, Differential Assy
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-2-4 Hub & Components, Rear Right Hand 2ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-12-2 Hub & Components, Rear Right Hand 4ws
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-13-1 458/10680, Drivehead Assembly
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F3-3-1 Wheels & Tyres, 480/70r30
| 15***01 | Valve | 1 |
| 33***64 | Wheel, Assembly Left Hand, 480/70-R30 Firestone | 2 |
| 33***65 | Wheel, Assembly Right Hand, 480/70-R30 Firestone | 2 |
F3-3-9 Wheels & Tyres, 440/80-R30 Nokian
| 15***01 | Valve | 1 |
| 33***55 | Wheel, & Tyre Assembly Tri2, 44***30 Nokian L/H | 2 |
| 33***57 | Wheel, & Tyre Assmbly Tri2, 44***30 Nokian R/H | 2 |
F3-3-2 Wheels & Tyres, 540/65-R30
| 15***01 | Valve | 1 |
| 33***68 | Wheel, Assembly Left Hand, 54***30 Firestone | 2 |
| 33***73 | Wheel, Assembly Right Hand, 540/65-R30 Firestone | 2 |
F3-3-7 Wheels & Tyres, 440/80-R24 Nokian, Tri2
| 15***01 | Valve | 1 |
| 33***08 | Wheel, & Tyre Assembly Tri2, 44***24 Nokian L/H | 2 |
| 33***09 | Wheel, & Tyre Assembly Tri2, 44***24 Nokian R/H | 1 |
F3-3-5 Wheels & Tyres, 620/70-R26 Xm27, Michelin
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw20ax26 | 1 |
| 42***00 | Tyre, 620/70 R26 Xm27, Tl 145b Michelin | 1 |
F3-3-11 Wheels & Tyres, 480/70r28, 480/70r30, 2015mm (80in.) Track
| 15***01 | Valve | 1 |
| 33***66 | Wheel, Assembly Left Hand, 480/70-R30 Firestone | 2 |
| 33***67 | Wheel, Assembly Right Hand, 480/70-R30 Firestone | 2 |
F3-3-4 Wheels & Tyres, 600/65-R28 Tm800, Pirrelli
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw18lx28, 5 Stud | 1 |
| 42***00 | Tyre, Trelleborg, 60***8t | 1 |
F3-3-6 Wheels & Tyres, 520/65-R30 Nokian, 72" Track
| 15***01 | Valve | 1 |
| 33***94 | Wheel, Assembly, 520/65-R30 Nokian | 4 |
| 41***00 | Rim, Wheel, Dwl15x30, 5 Stud | 1 |
F3-3-10 Wheels & Tyres, 540/65-R30 Nokian, Tri 2
| 15***01 | Valve | 1 |
| 33***06 | Wheel, Assembly Left Hand, 54***30 Nokian | 2 |
| 33***07 | Wheel, Assembly Right Hand, 54***30 Nokian | 2 |
F3-4-1 Wheel Chocks, German
| 13***8Z | Screw, M8x30 | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
F3-3-15 Wheels & Tyres, Nokian 16.9 R24, 72" (1830)
| 15***01 | Valve | 1 |
| 33***61 | Wheel, Assembly Nokian 16.9 R24, 72" (1830) | 4 |
| 41***12 | Rim, Wheel W15l X 24 | 1 |
F3-3-13 Wheels & Tyres, 16.9-R28 & R30
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15lx30, 72mm Offset, 5 Stud | 1 |
| 41***00 | Rim, Wheel, W14lx28, 72mm Offset, 5 Stud | 1 |
F3-2-1 Propshafts, Axle Drive, Rear
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***3Z | Nut | 4 |
| 82***47 | Nut, Cleveloc | 8 |
F3-3-12 Wheels & Tyres, 540/65-R28 & R30, 2015mm (80in) Track
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15lx30, 72mm Offset, 5 Stud | 1 |
| 41***00 | Rim, Wheel, W14lx28, 72mm Offset, 5 Stud | 1 |
F3-3-3 Wheels & Tyres, 16.9-R28 & R30
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dwl15x30, 5 Stud | 1 |
| 42***00 | Tyre, 16.9-R30, Michelin Agribib | 1 |
F3-1-1 Propshafts, Axle Drive, Front
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-3-8 Wheels & Tyres, 440/80-R28 Nokian
| 15***01 | Valve | 1 |
| 33***04 | Wheel, & Tyre Assembly Tri2, 44***28 Nokian L/H | 2 |
| 33***05 | Wheel, & Tyre Assembly Tri2, 44***28 Nokian R/H | 2 |
F3-3-14 Wheels & Tyres, 16.9-R28 & 30 Nokian
| 15***01 | Valve | 1 |
| 33***14 | Wheel, Assembly, 16.9r30 Nokian | 4 |
| 33***33 | Tyre, Assembly, 16.9-R28 Nokian | 4 |
F5-3-1 Pipework, Pto Drain
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F5-4-1 Dipstick & Filler, Transmission, Mechanical Spool Valve Build
| 13***5D | Setscrew, M8x20 | 1 |
| 13***6D | Screw, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
F5-3-3 Pipework, Powershift Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***7Z | Capscrew, M8x25mm | 3 |
F5-4-2 Dipstick & Filler, Transmission, Electronic Spool Valve Build
| 13***5D | Setscrew, M8x20 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***9D | Setscrew, M8x35 | 1 |
F5-2-1 Transmission Gearbox, Assembly, Twin Pto, 40/50kph Airshift
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Bolt, M10 X 55 | 7 |
| 13***9Z | Screw, M10 X 35 | 19 |
F5-1-1 Transmission Gearbox, Assembly, Single Pto, 40/50kph Airshift
| 13***7Z | Bolt | 2 |
| 13***3Z | Bolt, M10 X 55 | 7 |
| 13***9Z | Screw, M10 X 35 | 19 |
F5-3-2 Pipework, Wet Clutch Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***1Z | Nut | 2 |
F6-1-2 Gearbox, Range, Airshift
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-6-1 Gear Change, Air Assisted
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-7-1 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***07 | Shaft, Selector, Low & Reverse | 1 |
F6-2-1 Gearbox Housing
| 13***9Z | Bolt | 1 |
| 13***7Z | Bolt, Coated | 7 |
| 13***9Z | Screw, M10 X 35 | 21 |
F6-4-1 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F6-5-2 Shaft, Output Group, 4 Wheel Drive Clutch
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
| 44***09 | Washer, Thrust | 1 |
F6-5-1 Shaft, Output Group, 4 Wheel Drive Clutch
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
| 44***03 | Washer, Thrust; Superseded By 82***82 | 1 |
F6-1-1 Gearbox, Range, Manual
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F7-4-1 Gearbox, 6 Speed, Input Shaft Assembly
| 45***68 | Bearing, Roller | 1 |
| 45***00 | Gearbox, 6 Speed (Eaton) | 1 |
| 47***64 | Flange, Synchro | 1 |
F7-5-1 Gearbox, 6 Speed, Front Cover Assembly
| 45***97 | Seal, Oil | 1 |
| 45***02 | Cover, Front | 1 |
| 45***00 | Gearbox, 6 Speed (Eaton) | 1 |
F7-1-1 Gearbox, 6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-7-1 Gearbox, 6 Speed, Mainshaft Assembly
| 45***44 | Gear, 3rd | 1 |
| 45***45 | Bearing, Needle Roller | 2 |
| 45***49 | Plunger | 7 |
F7-6-1 Gearbox, 6 Speed, Layshaft Assembly
| 45***63 | Circlip, 2.12mm | 0 |
| 45***64 | Circlip, 2.07mm | 0 |
| 45***65 | Circlip, 2.02mm | 0 |
F7-9-1 Gearbox, 6 Speed, Remote Control
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 45***35 | Pin, Grooved | 1 |
F7-8-1 Gearbox, 6 Speed, Selector Controls
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F7-3-1 Gearbox, 6 Speed, Rear Case Assembly
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***49 | Bolt, Fastener Special | 4 |
F7-10-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F7-2-1 Gearbox, 6 Speed, Front Case Assembly
| 45***16 | Screw, Hammer Drive | 2 |
| 45***24 | Dowel, 8.0 Dia X 16.0mm | 2 |
| 45***33 | Plunger, Neutral Detent | 1 |
F8-4-3 Clutch Assembly, Low
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-5-1 Gear Group, Splitter & Pto, Input, Output & Intermediate
| 13***5Z | Bolt | 5 |
| 22***28 | Circlip | 1 |
| 22***85 | Circlip, Internal | 1 |
F8-7-1 Clutch Assembly, Wet Master
| 13***9Z | Screw, M10x35mm | 15 |
| 13***3Z | Bolt, M10 X 55 | 3 |
| 13***21 | Bolt | 12 |
F8-1-2 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-1-1 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew | 6 |
| 45***01 | Cover, End | 2 |
F8-3-1 Gearbox Housing, Splitter & Pto, Clutch Assemblies
| 13***9Z | Screw, M10 X 35 | 18 |
| 33***25 | Plate, Friction | 2 |
| 33***26 | Plate, Counter, Brake | 1 |
F8-6-1 Gearbox, Splitter & Pto, Selector Mechanism
F8-2-1 Clutch Assembly, Power Take Off, Front
| 13***7Z | Bolt, Coated | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
F8-9-1 Clutch Drum, Carrier & Input Gear, Assembly
| 33***85 | Plate, Bearing Cover | 1 |
| 45***24 | Carrier, Clutch & Input Gear | 1 |
| 45***11 | Gear, 27t Power Take-Off Input | 1 |
F8-8-1 Clutch Assembly, Drum, Hub, Pressure Plates
| 13***16 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 22***60 | Circlip | 1 |
F8-2-2 Clutch Assembly, Power Take Off, Rear
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 21***04 | Dowel | 3 |
| 22***60 | Circlip | 1 |
F8-4-2 Clutch Assembly, Medium/High
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-10-1 Solenoid & Valves, Splitter Gearbox
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 16 |
F8-4-1 Clutch Assembly, Input
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***04 | Retainer, Spring | 1 |
F9-10-1 Power Take Off, Rear Installation
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F9-3-1 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-2-1 Gearbox, Front P.T.O Transfer
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F9-12-2 Guard, Rear, Power Take Off, Static, French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-11-1 Propshaft, Power Take Off, Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-12-1 Guard, Rear, Power Take Off
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt, M12x20 | 3 |
| 13***3Z | Nut, Lock, M10 | 2 |
F9-2-2 Gearbox, Power Take Off, Front, ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F9-1-2 Power Take Off, Front Attachments, ( Single )
| 11***25 | Strap | 2 |
| 13***3D | Setscrew, M8 X 16mm | 3 |
| 13***3D | Bolt | 3 |
F9-1-1 Power Take Off, Front Attachments
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3D | Setscrew, M10 X16mm | 3 |
F9-3-2 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
G Brakes
G1-32-1 Trailer Brakes, Hydraulic, Single Line (Safim)
| 13***7D | Setscrew, M8x25 | 2 |
| 13***4D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-4-1 Air Charge Circuit
| 02***17 | Olive, 16mm | 3 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, M12 | 3 |
G1-1-1 Brake, System, 2ws
| 13***8D | Setscrew, M12 X 30 | 1 |
| 13***8D | Bolt, M8x30mm | 5 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-8-1 Handbrake Circuit
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-12-1 Valve, Footbrake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
| 47***00 | G.A. | 1 |
G1-20-1 Trailer Circuit, Twin Coupling Head
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 5 |
G1-7-1 Trailer Braking, Circuit
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-5-2 Foot Brake Circuit
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***11 | Seal, Bonded | 2 |
G1-14-1 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
| 33***14 | Valve, Handbrake, Colour Black | 1 |
G1-9-1 Brakes, Trailer Air, Single Line, Optional
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Bolt, M6 X 25 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
G1-5-1 Foot Brake Circuit
| 13***8D | Bolt, M6 X 30 | 8 |
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
G1-6-11 Foot Brake, Actuator Circuit, Abs
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***7D | Setscrew, M12 X 25 | 6 |
| 13***0D | Bolt, M8 X 200 Long | 2 |
G1-3-11 Brake Caliper, Rear, 4ws
| 13***1D | Bolt, M16 X 45mm | 4 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 15***66 | Caliper, Brake Assembly, 60mm | 2 |
G1-19-1 Trailer Circuit, Duomatic Coupling
| 13***7D | Setscrew, M8x25 | 2 |
| 13***1D | Nut, M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
G1-30-1 Brakes, Trailer, Hydraulic
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-21-1 Valve, Circuit Protection
| 15***75 | Valve, Circuit Protection | 1 |
G1-2-1 Brake Caliper, Front
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***8D | Bolt, M20 X 80mm | 4 |
| 15***65 | Caliper, Brake Assembly, 75mm | 2 |
G1-18-1 Trailer Circuit, 'C'Couplings, Twin Line
| 45***36 | Coupling, 'C'Male, Yellow | 1 |
| 45***37 | Coupling, 'C' Female, Red | 1 |
| 47***00 | G.A, Trailer Brakes, C Type + Hyds | 1 |
G1-7-2 Trailer Braking, Control Line Filter, Circuit
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
G1-1-2 Brake, System, 2ws Abs
| 13***8D | Setscrew, M12 X 30 | 1 |
| 13***8D | Bolt, M8x30mm | 5 |
| 13***3D | Nut, Self Lock M8 | 5 |
G1-1-12 Brake, System, 4ws Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***8D | Setscrew, M12 X 30 | 2 |
G1-1-11 Brake, System, 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***8D | Setscrew, M12 X 30 | 2 |
G1-31-1 Valve, Trailer Brake, Hydraulic
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 1 |
G1-10-1 Air Drier
| 15***84 | Drier, Air, Regenerative | 1 |
| 15***05 | Cartridge, Desiccant | 1 |
| 15***06 | Kit-Heater | 1 |
G1-17-1 Trailer Circuit, Palm Couplings, Twin Line
| 33***43 | Cover, 'C' Coupling | 1 |
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
G1-3-1 Brake Caliper, Rear, 2ws
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***0D | Bolt, M16 X 100mm | 4 |
| 13***3D | Nut, M16 | 4 |
G1-16-1 Valve, Trailer Control
| 15***25 | Kit-Repair, Brake Valve | 1 |
| 92***79 | Valve, Trailer Control, Single Caliper | 1 |
G1-6-1 Foot Brake, Actuator Circuit
| 13***4D | Screw | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***7Z | Bolt | 4 |
G1-15-1 Brake, Actuator, Parking
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
| 47***34 | Kit-Repair | 1 |
G1-11-1 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-22-1 Valve, Trailer Control, Single Line
| 15***30 | Valve, Trailer Control | 1 |
| 15***55 | Kit-Repair, Major | 1 |
| 15***56 | Kit-Repair, Minor | 1 |
G1-13-1 Actuator, Air & Hydraulic
| 13***8D | Setscrew, M10 X 30 | 2 |
| 14***8D | Washer, M10 | 2 |
| 15***01 | Chamber, Brake | 1 |
S Suspension
S1-2-1 Suspension, Front, Fig.2
| 13***9D | Screw, M12x35mm Long | 4 |
| 13***9D | Bolt, M20 X 90, Dacromet | 2 |
| 13***9D | Bolt, M18 X 190 | 1 |
S1-1-1 Suspension, Front, Fig.1
| 13***8D | Bolt, M10 X 80 | 4 |
| 13***1D | Bolt, M16 X 110 | 2 |
| 13***5D | Bolt, M16x150, Dacromet | 2 |
S2-1-1 Suspension, Rear 2ws
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
| 13***2D | Bolt, M12 X 50mm Long | 4 |
| 13***0D | Bolt, M12x100, Dacromet | 4 |
S2-2-10 Kit, Conversion, V Link Germany Only
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Capscrew, M20 X 110 | 2 |
| 14***2D | Washer, Plain | 2 |
S2-2-1 Suspension, Rear, 4ws
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
| 13***2D | Bolt, M12 X 50mm Long | 4 |
| 13***0D | Bolt, M12x100, Dacromet | 4 |
U Engine Qsb 6.7 Tier 3, S
U1-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***71 | Plug | 1 |
U1-5-1 Front End Drive
| 02***31 | Housing, Assembly, Fan Drive | 1 |
| 02***32 | Bearing | 1 |
| 02***33 | Circlip | 2 |
U1-3-1 Block Assembly
| 02***07 | Plug, Expansion, D=26mm | 3 |
| 02***08 | Plug, Expansion, 17.73mm | 2 |
| 02***09 | Thimble | 14 |
U1-8-1 Engine Mountings
| 13***1D | Bolt, M12x110 | 2 |
| 13***3D | Nut | 2 |
| 13***8D | Capscrew, M12 X 30 | 8 |
U1-6-1 Gear Cover, Front
| 02***62 | Screw | 6 |
| 02***74 | Screw, M8 X 45 | 7 |
| 02***81 | Dowel, Ring | 2 |
U1-5-11 Cooling Fan & Spacer
| 01***55 | Adapter, Fan Drive | 1 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 13***5D | Capscrew, M10 X 20 | 4 |
U1-7-2 Flywheel Damper
| 13***4Z | Bolt | 6 |
| 33***98 | Coupling, Voith, Torsional Damper | 1 |
| 48***22 | G.A, Voith Damper Assembl, P137 | 1 |
U1-6-2 Rear Housing, Camshaft & Gear
| 02***39 | Dowel, Pin | 1 |
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
| 02***65 | Screw, M12 X 30 | 1 |
U1-1-1 Engine, Complete
| 33***85 | Engine, Complete, T3 | 1 |
| 47***98 | G.A, Engine - Cummins T3, 2155 | 1 |
U1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***43 | Circlip | 12 |
| 02***09 | Kit-Wear Sleeve, Front | 1 |
| 02***59 | Kit-Wear Sleeve, Rear | 1 |
U2-1-1 Cylinder Head
| 02***07 | Plug, Expansion, D=26mm | 13 |
| 02***15 | Plug, Pipe, 1/2"Npt | 4 |
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
U2-5-1 Crankcase Breather
| 02***26 | Hose, Plain | 1 |
| 02***55 | O Ring | 1 |
| 02***15 | Seal, O Ring | 2 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***21 | Nut, 3/8"-24unf, Heavy Hexagon | 2 |
| 02***22 | O Ring | 4 |
| 02***10 | Screw, Flange Head, M8 X 50mm | 2 |
U2-4-1 Lifting Plates, Engine
| 02***05 | Bolt | 2 |
| 02***12 | Bracket, Lifting | 1 |
| 02***14 | Screw, Flange Head | 4 |
U2-3-1 Rocker Cover
| 02***46 | Nut | 6 |
| 02***47 | Cap, Filler | 1 |
| 02***48 | Gasket, Filler Cap | 1 |
U3-3-1 Filter, Air
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M8x25 | 1 |
U3-1-1 Manifold, Induction, And Induction Heater
| 02***10 | Screw, Flange Head, M8 X 50mm | 1 |
| 02***98 | Screw | 1 |
| 02***23 | Bolt | 7 |
U3-2-1 Manifold, Exhaust
| 02***85 | Screw | 3 |
| 02***83 | Screw, Flange Head Cap | 12 |
| 02***58 | Spacer, Mounting | 12 |
U3-4-1 Exhaust System
| 02***73 | Clamp, D=81.8 | 1 |
| 02***54 | Elbow, Turbo Exhaust Outlet | 1 |
| 13***3D | Setscrew, M8 X 16mm | 6 |
U4-2-1 Thermostat & Housing
| 02***13 | Screw | 3 |
| 02***37 | Connector, Water Outlet | 1 |
| 02***64 | Seal, Thermostat | 1 |
U4-5-1 Air Charge Cooler, Fittings & Mountings
| 13***8D | Setscrew, M8 X 30mm | 10 |
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***2D | Nut, Thin | 2 |
U4-3-1 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 12 |
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***8D | Setscrew, M10 X 30 | 2 |
U4-1-1 Pump, Water
| 02***86 | Seal, Rectangular Ring | 1 |
| 02***29 | Screw, Hex Flange Head | 2 |
| 02***73 | Pump, Kit-Water | 1 |
U4-4-1 Radiator & Hoses
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***0D | Bolt, M8x40 | 3 |
| 13***3D | Bolt, M8 X 55mm | 1 |
U4-6-1 Air Charge Cooler, Hose & Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U4-2-2 Connector, Water Inlet
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***98 | Seal, Rectangular Ring | 1 |
| 02***33 | O Ring | 1 |
U4-3-2 Anti-Recirculation
| 13***3D | Setscrew | 8 |
| 13***5D | Setscrew, M6 X 20mm Long | 14 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
U5-1-2 Oil Level Dipstick, & Tube
| 24***09 | Grommet | 1 |
| 33***56 | Dipstick, Assembly | 1 |
| 33***58 | Dipstick, Engine Oil | 1 |
U5-3-1 Engine Oil Filler, Installation
| 02***98 | O Ring | 1 |
| 02***43 | Cap, Oil Filler | 1 |
| 13***5D | Setscrew, M10 X 20 | 2 |
U5-4-1 Filter, Oil & Cooler
| 02***16 | Plug, Pipe | 1 |
| 02***33 | Spring, Oil Relief Valve | 1 |
| 02***32 | Valve, Oil Pressure Relief | 1 |
U5-2-1 Pump, Oil
| 02***32 | Screw | 4 |
| 02***11 | Pump, Oil | 1 |
U5-1-1 Sump, Oil, & Fittings
| 02***95 | Plug | 2 |
| 02***74 | Screw, M8 X 45 | 18 |
| 02***22 | Screw, Flange Head, M10 X 25 | 1 |
U6-3-1 Fuel Pipes, Filter To Fuel Pump
| 02***43 | Hose, Fuel Feed | 1 |
| 02***44 | Hose, Fuel Feed | 1 |
U6-4-1 Fuel Pipes, Fuel Tank To Filter
| 13***9D | Setscrew | 1 |
| 13***1D | Screw, M12x45 | 2 |
| 13***3D | Nut, M6 Lock | 1 |
U6-1-1 Pump, Fuel Injection
| 02***17 | Nut | 3 |
| 02***81 | Nut | 1 |
| 02***82 | Washer, Spring | 1 |
U6-7-1 Filter, Fuel
| 02***87 | Screw | 2 |
| 02***93 | Washer, Sealing | 2 |
| 02***96 | Connector, Quick Disconnect | 2 |
U6-3-2 Fuel System, Leak-Off Pipework
| 02***19 | Plug, Expansion, D=9.8mm | 1 |
| 02***14 | Washer, Sealing | 1 |
| 02***07 | Bolt, M8x1.25x25 | 1 |
U6-6-2 Filter, Fuel Sedimenter
| 02***05 | Plug | 1 |
| 32***63 | Element, Fuel Water/Sediment, Filter Cartridge | 1 |
| 33***52 | G.A, Fuel Supply | 0 |
U6-6-1 Filter, Fuel Sediment
| 02***46 | O Ring | 1 |
| 02***41 | Plug, Threaded | 1 |
| 32***63 | Element, Fuel Water/Sediment, Filter Cartridge | 1 |
U6-2-1 Fuel Manifold, & Injection Pipes
| 02***80 | Screw, M8 X 50 | 4 |
| 02***36 | Retainer, Fuel Pipe Connector | 6 |
| 02***34 | Valve, Pressure Relief | 1 |
U6-5-1 Injectors, Fuel
| 02***08 | Screw | 12 |
| 02***08 | O Ring | 1 |
| 02***31 | Connector | 6 |
U6-4-2 Fuel Pipes, Fuel Tank To Filter
| 13***9D | Setscrew | 1 |
| 13***2D | Setscrew | 2 |
| 13***3D | Nut, M6 Lock | 1 |
U7-2-1 Turbo, Pipework
| 02***47 | Adapter | 2 |
| 02***73 | Clamp, D=81.8 | 1 |
| 02***99 | O Ring | 1 |
U7-3-1 Air Compressor, & Installation
| 02***75 | O Ring | 1 |
| 02***02 | Screw, M8 X 20mm | 2 |
| 02***09 | Screw | 2 |
U7-5-1 Compressor, & Installation, Air Conditioning
| 13***1D | Bolt, M8 X 110mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***31 | G.A, Air Con Installation | 1 |
U7-4-1 Compressor Pipework
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***54 | Spacer | 1 |
| 02***05 | Bolt | 1 |
U7-1-1 Turbocharger
| 02***36 | Nut | 4 |
| 02***78 | Stud | 4 |
| 02***46 | O Ring | 1 |
FASTRAC 2155 serial number reference
The serial number plate is located on the chassis frame. The plate contains the 17-digit Vehicle Identification Number (VIN), the engine serial number, and the transmission serial number. The VIN includes a manufacturing code, engine type code (26 for 2155), transmission type code, and vehicle maximum speed code. For machines outside the documented serial ranges, check the machine identification plate and confirm applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 742000 | Applicable to JCB Fastrac 2155 and 2170 models per service manual the OEM part reference-1. Indicates serial number 742000 onwards. | |
| 00742003-00742999 | Specific serial range for JCB Fastrac 2155 and 2170 per service manual the OEM part reference-2. Covers the lower end of the 2000 series production. |
Frequently asked questions
What engine does the JCB Fastrac 2155 use?
The JCB Fastrac 2155 is powered by a 119 kW (160 hp) JCB diesel engine, with some sources citing up to 240 hp for specific 4WS configurations.
What is the operating weight of the JCB Fastrac 2155?
The operating weight ranges from 7.3 tonnes to 10.5 tonnes gross vehicle weight depending on configuration.
What model replaced the JCB Fastrac 2155?
The Fastrac 2155 was succeeded by the Fastrac 8000 series.
What FASTRAC 2155 owners discuss
What engine powers the JCB Fastrac 2155 and what are its key specifications?
The JCB Fastrac 2155 is powered by a 5.9-liter Cummins turbocharged diesel engine. It produces 160 hp (120 kW) at the engine, with a PTO-tested output of 225 hp. The engine operates within a range of 2200-2400 rpm and complies with Tier 4 Final emission standards.
How does the transmission system function in the 2155 series?
The 2155 utilizes an Eaton Fuller six-speed transmission with three splitters, attached to a three-speed JCB range box. It features a Smoothshift clutch, which is a significant improvement over earlier dry clutch models and is rated for 10,000 to 12,000 hours if used considerately. The gearbox is noted as less suitable for heavy grain cart work compared to the 3230 or 3220 models.
What are the common electrical and wiring issues reported for this model?
Wiring is a known weak point; cables can trap moisture and corrode. A major diagnostic challenge is that almost all wiring uses the same color, and wire numbering often wears off over time, making fault-finding difficult. Owners recommend patience and a good multi-meter. Additionally, electric hydraulic spools on 'plus' models are prone to frequent failure and are expensive to replace, leading some owners to convert to manual spools.
What undercarriage and brake wear patterns are typical for the Fastrac 2155?
The tractor is equipped with outboard disc brakes on all corners with ABS as standard. A common issue is that disc brake pad calipers can seize, which may lead to fires. The park brake is also noted as less reliable. For those using demount sprayers, the PUH linkage can seize if not maintained, and drive train UJs and Spicer joints require regular greasing to prevent expensive failures.
How is the steering and visibility characterized by operators?
The Fastrac 2155 uses a power-assisted gearbox steering system rather than a steering ram, which affects auto-steer integration (wheel-mounted systems are preferred). The steering lock is not considered a strong point, resulting in a large turning circle that can be cumbersome for field work like mowing. Visibility of the drawbar is limited, though cab visibility is generally good.
What are the primary hydraulic behaviors and limitations?
The hydraulic system is closed-center with a load-sensing control type. It features a pump flow rate of 140 l/min and a maximum hydraulic pressure of 210 bar. Earlier models had poor hydraulic performance, but the 2155 offers smooth and responsive hydraulics suitable for attachments. It includes four hydraulic remotes and a Category 3 three-point hitch.
What specific checks are critical when buying a used JCB Fastrac 2155?
Inspect the Smoothshift clutch for wear, as replacement is a major job requiring cab removal. Check all electric hydraulic spools for functionality, as failures are common and costly. Verify the condition of the outboard disc brake calipers to ensure they have not seized. Test the PUH linkage for seizure if a demount sprayer is used. Finally, use a multi-meter to check for corroded wiring connections, as wire colors are uniform and numbers may be illegible. Have your dealer verify the specific serial number range (the OEM part reference onwards) for applicable service bulletins and component updates.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 2155. Related factory variants of the same model family:
FASTRAC 2155
Need a specific FASTRAC 2155 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.