JCBagriculturalfastrac
Jcb FASTRAC 2150
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 2150 is a high-speed utility tractor manufactured from 1998 to 2004. It is powered by a Perkins 1000-6TW 6-cylinder diesel engine producing 158 hp (117.8 kW). The machine features a 54-speed forward and 18-speed reverse transmission, hydrostatic power steering, and a 4x4 chassis. Operating weight ranges from 6.5 t (14,330 lb) to 14,034 lb (6,365 kg) depending on configuration. It succeeded the Fastrac 155 and preceded the Fastrac 3000 series. Configurations included 2WD and 4WD variants with Category 3 hitch compatibility.
Across the Fastrac 2000 series, the 2150 utilized the Perkins 1000-6T4 engine in earlier serial ranges and the 1000-6TW in later builds, distinguished by VIN codes 13-16. The machine remains relevant in the used market due to its robust Perkins powertrain and accessible maintenance intervals. Parts availability is supported by aftermarket suppliers and breaker networks, with specific attention to the transmission and hydraulic systems which are common failure points in high-hour units.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 2150 specifications
Engine
| Model | Perkins 1000-6TW |
| Configuration | Intercooled turbocharged diesel, 6-cylinder, liquid-cooled |
| Displacement | 6.0 L (365.2 ci) |
| Bore x Stroke | 100 x 127 mm (3.937 x 5.00 in) |
| Power (Net) | 117.8 kW (158 hp) at 2200 RPM |
| Torque | 663.1 Nm (489.0 lb-ft) at 1500 RPM |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 6365 kg (14,034 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 508 cm (200.0 in) |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | 288 cm (113.4 in) |
| Wheelbase | 277 cm (109.4 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
| Tire Size (Front/Rear) | the OEM part reference |
Performance
| Travel Speed | Varies by configuration/series (30, 40, 55, 65, 75 km/h options documented in service manual for Fastrac 2000 series) |
| Rear Lift Capacity | 6001 kg (13,230 lb) |
| Drawbar Pull | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 219.9 L (58.1 gal) |
| Hydraulic System | Total Flow: 74.2 lpm (19.6 gpm); Capacity not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb FASTRAC 2150 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the FASTRAC 2150 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor transmission fluid condition at 500-hour intervals. The 54-speed gearbox requires specific JCB hydraulic fluid to prevent synchronizer wear. Check front and rear axle oil for metal particulates indicative of gear wear. Analyze engine oil for Perkins 1000-series soot loading. Inspect coolant concentration to prevent corrosion in the Perkins 6.0L block. Track fuel filter restriction to predict injector pump strain.
Corrective & Common Repairs
Address transmission sensor faults (Error D021) by inspecting speed sensor wiring and connectors. Replace hydraulic pressure sensors for Error T060 codes. Repair leaking front axle pivot seals common in high-hour units. Replace worn brake linings during 500-hour services. Fix fuel metering unit faults causing erratic idle. Replace cracked drive shaft universal joints to prevent vibration damage.
Overhaul & Rebuild Points
Rebuild the Perkins 1000-6TW engine at 10,000 hours or upon loss of compression. Inspect transmission synchronizers for wear during major service. Replace all suspension bushings to restore ride quality. Overhaul steering cylinders if internal leakage causes drift. Rebuild the fuel injection pump if rail pressure control fails. Replace all high-tensile fasteners with Dacromet-coated equivalents during reassembly.
Seasonal & Environment Servicing
Flush the cooling system annually to prevent scale buildup in the Perkins block. Inspect air intake pre-cleaner for debris accumulation in dusty conditions. Check battery electrolyte levels and clean terminals before winter storage. Lubricate all chassis points with grease suitable for low temperatures. Inspect hydraulic hoses for cracking due to UV exposure. Verify coolant antifreeze protection matches local minimum temperatures.
FASTRAC 2150 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/921000 | Filter, Fuel Sediment, 30 Micron | Fuel system service | Check fitment → |
| 32/921001 | Element, Fuel Filter | Fuel system service | Check fitment → |
| 478/01795 | Pipe, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 478/02143 | Pipe, Fuel, Flowmeter To Filter | Fuel system service | Check fitment → |
| 02/200397 | Pipe, Assembly, Fuel, L/Pump To Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 2150 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| D021 | Transmission sensor malfunction | Damaged transmission speed sensor or loose wiring connections | Inspect transmission speed sensor and wiring for damage or loose connections |
| T060 | Hydraulic system fault | Low hydraulic fluid level or faulty hydraulic pressure sensor | Check hydraulic pressure sensors and fluid levels |
| D0230 | Brakes warning symbol | Brake system fault | Verify brake system operation and sensor status |
| K4013 | Fuel system fault | Fuel filter blockage or fuel meter issue | Check fuel filters and fuel meter operation |
| P0100 | Torque Reduction AMF High Side Driver fault | Open circuit or short circuit to battery in AMF high side driver | Inspect AMF high side driver circuit for open or short circuits |
| P0101 | MAF Sensor Fault | Malfunctioning Mass Air Flow sensor | Inspect and test MAF sensor |
| P0102 | Torque Reduction MAF Low Voltage Fault | Low voltage signal from MAF sensor | Check MAF sensor wiring and voltage supply |
| P0103 | Torque Reduction MAF High Voltage Fault | High voltage signal from MAF sensor | Check MAF sensor wiring and voltage supply |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Faulty crankshaft position sensor or wiring | Inspect crankshaft position sensor and its circuit |
| P0336 | Torque Reduction Crank Sensor Fault (Signal Fault) | Crankshaft position sensor signal out of limits | Inspect crankshaft position sensor and signal integrity |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
FASTRAC 2150 attachments & work tools
Rear Hitch & Linkage
The JCB Fastrac 2150 utilizes a Category 3 rear hitch system, supporting a maximum rear lift capacity of 6,001 kg (13,230 lbs). This configuration allows for the mounting of heavy agricultural implements compatible with the Category 3 standard.
Power Take-Off (PTO)
The tractor is equipped with a rear PTO operating at the OEM part reference rpm. Additionally, specific configurations such as the Fastrac 2150 A variant include a front power take-off (PTO) option for auxiliary power needs.
Hydraulic System
The hydraulic system provides a total flow of 74.2 lpm (19.6 gpm). Implement compatibility relies on this flow rate, and specific tool requirements for hydraulic operation must be verified against this capacity.
Cab & Environmental Options
Factory configurations include a cab equipped with air conditioning. Certain variants, such as the Fastrac 2150 A, also feature air brakes as part of the special equipment package.
All FASTRAC 2150 assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 2150. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-2-1 Hitch Assembly, Front
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***9Z | Bolt | 2 |
A3-10-5 Hitch, Rear, Heavy Duty
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-4-1 Front Towing Point
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
A3-19-1 Drawbar
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-30-1 Rear Deck
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 8 |
| 13***3Z | Nut, M16 | 8 |
| 14***1Z | Washer, M16 Plain | 8 |
A3-14-3 Lift Rod Assembly, Heavy Duty
| 47***07 | Nipple, Grease | 3 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-13-1 Top Link Assembly, Eye End, 80mm Lift Rams
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-15-2 Stabiliser, Standard Compression
| 33***96 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-20-2 Swinging Drawbar, With Piton, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-13-4 Top Link Assembly, Hook End, 80mm Lift Rams
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
| 47***05 | Handle | 1 |
A3-15-1 Stabiliser, Standard Compression
| 47***85 | Rod, Eye End | 1 |
| 47***86 | Spring | 1 |
| 47***87 | Rod, Connecting Link | 1 |
A3-16-1 Lower Links, Cat 3
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***08 | Kit-Repair, Cat3 Link | 1 |
A3-22-5 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-20-4 Swinging Drawbar, With Piton, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-14-2 Lift Rod Assembly, Standard
| 47***07 | Nipple, Grease | 2 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-3-1 Front Lower Links, Cat 3
| 47***02 | Pin | 1 |
| 47***15 | Pin, Tension | 2 |
| 47***10 | Link, Lower | 2 |
A3-13-2 Top Link Assembly, Eye End, 80mm Lift Rams
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-30-2 Rear Deck, Weight Carrier
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***9Z | Bolt | 4 |
| 13***1Z | Bolt, Hex. Hd, M20x110 | 2 |
A3-22-1 Trailer Coupling, Ladder Hitch, 30mm, Rockinger 850rb
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-22-2 Trailer Coupling, Ladder Hitch, 38mm, Rockinger 840ra
| 47***15 | Nipple, Grease - Drive In | 2 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-10-3 Hitch, Rear, Heavy Duty
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-22-4 Trailer Coupling, Ladder Hitch, 38mm, Rockinger 850d
| 33***21 | Coupling, Trailer Towing, Rockinger 860d01 | 1 |
| 33***34 | Kit-Lever | 1 |
| 33***35 | Kit-Spring | 1 |
A3-11-1 Pickup Hitch
| 14***0Z | Washer, Plain | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-18-1 Towing Hook
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***91 | Pin, Retaining | 1 |
A3-10-2 Hitch, Rear, Linkage
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***1Z | Bolt | 2 |
A3-15-3 Stabiliser, Short
| 33***97 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-5-1 Top Link, Front
| 47***00 | Link, Top | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-20-1 Swinging Drawbar, Without Piton, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
A3-10-1 Hitch, Rear, Standard
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-10-4 Hitch, Rear, Standard
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-21-1 Ladder Hitch, Assembly, Rockinger
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-20-3 Swinging Drawbar, Without Piton, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 160mm Long; 160 Long. Length Of Bolt Depends Upon Spacer Arangement On Customers Machine., Bolt, M20 X 160mm Long | 2 |
A3-13-3 Top Link Assembly, Hook End, 80mm Lift Rams
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-23-1 Roller Drawbar, Heavy Duty
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-14-1 Lift Rod Assembly, Standard
| 47***00 | Rod, Lift Assembly | 2 |
| 47***34 | Rod, Eye End | 1 |
| 47***35 | Guard, Adjuster | 1 |
A3-1-2 Weight Tray Assembly, Front, With Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 41***40 | Sealant, Black Silicone, 310ml Cartridge | 0 |
A3-1-1 Weight Tray Assembly, Front, No Hitch
| 13***2Z | Bolt, M16x50m | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***1Z | Nut | 2 |
A3-22-3 Trailer Coupling, Ladder Hitch,Italian
| 47***00 | Coupling, Trailer, Cat.D3 | 1 |
| 47***00 | Coupling, Trailer, Cat.D2 | 1 |
| 47***00 | Coupling, Trailer, Cat C | 1 |
B Bodywork, Cab, Loader End
B1-6-3 Front Mudflaps, Optional
| 13***8Z | Screw, M8x30 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 4 |
| 47***35 | Bracket, Mudflap Support | 2 |
B1-6-2 Fenders, Rear
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 8 |
B1-7-1 Quiet Build Kit
| 13***5Z | Bolt | 17 |
| 13***3Z | Nut, Self Lock, M6 | 8 |
| 14***1Z | Washer | 4 |
B1-5-2 Bonnet & Fittings
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
B1-3-1 Tank, Diesel Fuel
| 13***5Z | Bolt, M5 X 20mm Long | 5 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***4Z | Bolt, M10x60 | 1 |
B1-4-1 Steps, Cab Access
| 13***8Z | Screw, M8x30 | 1 |
| 13***8Z | Bolt, M10 X 30 | 9 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
B1-1-1 Chassis & Fittings
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt | 8 |
| 13***1Z | Bolt | 6 |
B1-5-1 Bonnet & Fittings
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
B1-2-2 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-2-1 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-6-1 Fenders, Front
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***8Z | Screw, M8x30 | 4 |
B2-11-11 Seat, Suspension, (Fig 1)
| 40***00 | Seat, Suspension | 1 |
| 47***42 | Kit, Headrest | 1 |
| 47***43 | Cover | 1 |
B2-6-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut | 4 |
B2-2-1 Cab Shell, Hardware
| 12***79 | Bush, Hinge | 4 |
| 12***92 | Plate, Door Catch | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
B2-10-1 Mirrors, External
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
B2-11-21 Seat, Passenger
| 40***00 | Seat, Suspension | 1 |
| 47***40 | Cushion, Seat | 1 |
| 47***41 | Cushion, Backrest | 1 |
B2-1-3 Cab Assembly
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 33***00 | Mounting, Metalastik, 60 | 2 |
B2-9-1 Soundproofing, Cab
| 24***05 | Grommet | 1 |
| 24***14 | Grommet | 1 |
| 24***10 | Grommet | 1 |
B2-11-12 Seat, Suspension, (Fig 2)
| 47***70 | Washer | 1 |
| 47***83 | Washer | 8 |
| 47***17 | Nut | 8 |
B2-11-22 Seat, Passenger, Optional
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
| 40***03 | Kit-Backrest Foam | 1 |
B2-8-1 Ducts, Mouldings, Floormat & Covers
| 12***31 | Vent, Air Register | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***3Z | Screw, M6x16 | 20 |
B2-12-1 Seat Belt
| 47***00 | Kit-Seat Belt, Lap Type, Kit-Seat Belt, Lap Type; Drivers Seat. Contains All Parts Necessary For Installation. | 2 |
| 47***00 | Kit-Seat Belt, Lap Type | 1 |
B2-11-1 Seats, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut | 4 |
| 13***1Z | Nut, M8 | 2 |
B2-5-1 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 7 |
B2-9-2 Soundproofing, Cab Base
| 47***48 | Pin, Locating | 0 |
| 47***10 | Bracket, Harness Mounting | 2 |
| 47***12 | Panel, Insulation, Floorplate L/Hand | 1 |
B2-4-2 Door, Right Hand
| 12***01 | Key, No. 1001 | 2 |
| 12***29 | Grommet | 1 |
| 12***30 | Grommet | 1 |
B2-4-1 Door, Left Hand
| 12***01 | Key, No. 1001 | 2 |
| 12***29 | Grommet | 1 |
| 12***30 | Grommet | 1 |
B2-9-3 Visor, Sun
| 12***56 | Bracket | 1 |
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
B2-3-1 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***68 | Glass, Front Quarter Light, Left Hand Clear; Replaced By 82***65, See San05392 | 1 |
| 82***69 | Glass, Front Quarter Light, Right Hand Clear; Replaced By 82***66, See San05392 | 1 |
B2-10-2 Mirrors, External
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 47***65 | Arm, Mirror, Left Hand | 1 |
B2-10-3 Mirrors, External
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
B2-1-2 Cab Assembly
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 33***00 | Mounting, Metalastik, 60 | 2 |
B2-11-2 Seat, Suspension, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-11-14 Suspension Unit, (Fig 2)
| 47***44 | Nut | 6 |
| 47***51 | Screw | 2 |
| 47***66 | Circlip | 1 |
B2-7-1 Cab, Console, Instrument Panel, Covers & Brackets
| 12***31 | Vent, Air Register | 4 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
B2-11-13 Suspension Unit, (Fig 1)
| 47***44 | Nut | 2 |
| 47***51 | Screw | 2 |
| 47***64 | Controller, Level | 1 |
B2-3-2 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***43 | Adhesive, & Sealant, 310ml Cartridge | 0 |
B2-11-3 Seat, Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-1-1 Cab Assembly
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 33***00 | Mounting, Metalastik, 60 | 2 |
B5-1-1 Decals, External, 2ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-2-1 Decals, Internal
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***43 | Label, Warning French, Read Operating Book | 1 |
B5-1-0 Identification, Serial Plates
B5-10-1 Lubricants & Filters
| 32***03 | Element, Primary | 1 |
| 32***04 | Element, Safety | 1 |
| 32***01 | Element, Air Filter, Main | 1 |
B5-9-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-4-1 Decals, North American, Homologation
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
| 81***79 | Label, Warning, General | 1 |
C Electrics-Machine, Cab & Engine
C1-7-3 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-10-2 Radar Installation
| 13***3Z | Bolt | 4 |
| 33***20 | Bracket, Radar Mounting | 1 |
| 70***00 | Radar, Ground Speed | 1 |
C1-7-2 Light, Rear Fog
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-1-1 Battery & Carrier
| 13***5Z | Bolt | 1 |
| 13***8Z | Screw, M8x30 | 12 |
| 13***1Z | Bolt, M8 X 45 | 1 |
C1-1-2 Battery & Isolator, Optional
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***8Z | Screw, M8x30 | 12 |
C1-10-1 Radar Installation
| 13***3Z | Bolt | 4 |
| 33***20 | Bracket, Radar Mounting | 1 |
| 70***00 | Radar, Ground Speed | 1 |
C1-2-1 Electrical Equipment
| 14***11 | Seal, Bonded | 1 |
| 32***30 | Indicator, Assembly | 1 |
| 47***80 | Switch, Pressure | 1 |
C1-3-1 Harnesses, Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C1-9-1 Horn, Single Tone
| 13***3Z | Bolt, M6x55 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-9-2 Horn, Single Tone
| 13***6Z | Bolt, M6x70 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***1Z | Washer | 1 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Magnetic, (Yellow) | 1 |
C1-5-1 Harness Connectors, Sumitomo
| 72***16 | Terminal, Crimp | 2 |
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
C1-7-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C1-6-1 Light, Head, Left Hand Dip
| 13***9Z | Bolt, M12x35 Grade 8.8 | 4 |
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
C1-6-2 Light, Head, Right Hand Dip
| 13***9Z | Bolt, M12x35 Grade 8.8 | 4 |
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
C1-3-3 Harnesses, Edc
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***2Z | Nut, Thin M20 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-3-2 Harnesses, Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
| 47***73 | Shield, Harness | 0 |
C2-1-1 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-6-1 Engine Block Heater
| 13***3Z | Nut | 2 |
| 47***89 | Bracket, Plug Mounting | 1 |
| 47***07 | Bracket, Plug Mounting | 1 |
C2-3-1 Alternator, 100amp
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
| 71***03 | Rotor, Assembly | 1 |
C2-4-1 Alternator Mountings
| 02***60 | Spacer | 1 |
| 02***53 | Lever, Alternator Adjusting | 1 |
| 02***60 | Bracket, Support | 1 |
C2-5-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C3-14-2 Power Supply, Auxiliary, Without Convenience Socket
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***53 | Bracket, Mounting, Power Supply | 1 |
C3-3-3 Switches & Sensor, Rear Hitch Control, External
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 47***62 | Bracket, Position Sensor | 1 |
| 47***98 | Switch, Position Sensor | 1 |
C3-8-1 Radio, Optional
| 24***12 | Grommet | 1 |
| 47***88 | Plate, Radio Blanking | 1 |
| 71***00 | Aerial | 1 |
C3-7-3 Ashtray & Lighter
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 47***41 | Ashtray | 1 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 64***00 | Tube | 0 |
| 71***01 | Jet, Windscreen Washer | 1 |
C3-9-3 Filter, Air Conditioning
| 32***00 | Filter, Carbon, Cab Intake | 1 |
| 32***00 | Filter, Air, Paper; Will Be Replaced By 32/92***00 Aug 98 | 1 |
| 32***00 | Filter, Air | 1 |
C3-9-2 Air Conditioning, Unit Assembly
| 30***61 | Unit, Air Conditioning, Heater | 1 |
| 47***25 | Grommet | 1 |
| 47***01 | Case, Air/Con. Unit | 1 |
C3-2-1 Instrumentation, Rear
| 24***09 | Grommet | 3 |
| 47***25 | Plate, Switch Mounting | 1 |
| 70***00 | Push Button Black, With Microswitch | 2 |
C3-10-1 Wash/Wipe, Windscreen
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
C3-12-5 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-9-1 Cab Heater, And Air Conditioning, Installation
| 13***5Z | Bolt | 3 |
| 13***2Z | Bolt, M6 X 50 | 4 |
| 13***3Z | Nut | 2 |
C3-3-2 Switch Panel, Draft Control
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
| 47***03 | Lever, Rotary Control, Small | 1 |
C3-3-1 Control Panel, With Rear Hitch
| 47***00 | Switch; A=Front Power Take-Off, B=2/4wd, C=Rear Power Take-Off. If Front And Rear Power Take-Off Fitted, Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fited., Switch, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only., Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fitted., Switch; A=Blanked, B=2/4wd, C=Rear Power Take-Off. If Rear Power Take-Off Only, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only | 0 |
| 47***91 | Plate, Ag Panel Switch | 1 |
| 47***35 | Plate, Ag Panel Switch | 1 |
C3-3-11 Control Panel, 4ws Quadtronic
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 47***40 | Gasket | 1 |
C3-12-3 Light, Working, Auxiliary
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 47***06 | Bracket, Mounting, Working Light | 2 |
C3-12-2 Light, Working, Front & Rear
| 24***05 | Grommet | 4 |
| 70***00 | Light, Working | 2 |
| 70***00 | Light, Working | 2 |
C3-4-1 Fuse Box & Relays, Front
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-12-4 Light, Indicator, Side
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C3-7-1 Light, Interior, Cab
| 47***12 | Bracket, Mounting, Door Light Switch | 1 |
| 47***16 | Bracket, Mounting, Door Light Switch | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
C3-7-2 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C3-11-1 Washer Kit, Windscreen
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C3-5-1 Fuse Box & Relays, Rear
| 13***5Z | Bolt, M5 X 20mm Long | 7 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***1Z | Nut, M5-8 | 1 |
C3-1-1 Instrumentation, Front
| 64***01 | Tube, Air, 5 Metre Length | 0 |
| 70***32 | Cover, Switch, Main Lights | 1 |
| 70***33 | Cover, Switch, Rear Fog | 1 |
C3-14-1 Power Supply, Auxiliary, With Convenience Socket
| 13***3Z | Screw, M6x16 | 3 |
| 13***1Z | Nut, M5-8 | 1 |
| 14***6Z | Washer, M6 | 3 |
C3-12-1 Light, Head, Right Hand Dip, Auxiliary
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 24***05 | Grommet | 2 |
C3-6-1 Switch, Column
| 70***01 | Column, Switch Cap | 1 |
| 70***01 | Clamp | 1 |
| 70***00 | Switch, Column Indicator | 1 |
C3-3-4 Switches & Sensor, Rear Hitch Control, External
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 1 |
C3-9-4 Air Conditioning, Unit Assembly
| 13***1Z | Screw, M4 X 12 | 7 |
| 13***3Z | Nut | 2 |
| 30***61 | Unit, Air Conditioning, Heater | 1 |
D Controls-Machine, Engine & Steering
D1-5-2 Valve Assembly, Pneumatic
| 47***68 | Adapter, Straight Connector | 3 |
| 47***71 | Screw, M2.5 X 25 | 8 |
| 47***72 | Gasket | 4 |
D1-8-1 Control, Valve Flow
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***31 | Screw, Grub | 2 |
D1-9-1 Contr0l, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***3Z | Nut | 2 |
D1-3-5 Valve, Maintenance, Clutch Pressure
| 25***46 | Valve, Dual Check -0.5, Pressure Maintenance | 1 |
| 25***20 | Valve, Check Cartrid | 2 |
| 25***21 | Kit-Seal | 1 |
D1-2-2 Splitter Dump, Inhibit, 3 Speed
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 13***1Z | Nut, M8 | 1 |
D1-3-2 Clutch, Master Cylinder
| 15***00 | Cylinder, Clutch Master | 1 |
| 15***01 | Kit-Repair, Master Cylinder | 1 |
| 15***79 | Cylinder, Clutch Master | 1 |
D1-6-1 Control, 2 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 5 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-3-1 Clutch Control, Circuit
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
D1-5-5 Gearshift, Air Assisted, Range Change, 2ws
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-5-3 Ram, Assembly, Pneumatic Gearchange
| 47***85 | Piston | 2 |
| 47***86 | Rod, Piston | 1 |
| 47***87 | Rod, Piston | 1 |
D1-7-1 Control, 4 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 5 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-1-2 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
D1-5-1 Gearshift, Air Assisted, Range Change, 2ws
| 13***2Z | Bolt, M6 X 50 | 4 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-3-3 Clutch Servo, Booster
| 13***7D | Capscrew | 2 |
| 15***00 | Cylinder, Booster Master | 1 |
| 15***01 | Valve, Clutch Booster | 1 |
D1-4-2 Gearshift, Manual Range Change
| 13***5Z | Bolt | 12 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
D1-11-1 Control, Ladder Hitch Release
| 13***3Z | Screw, M6x16 | 4 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***9Z | Washer | 1 |
D1-3-6 Clutch Control, Circuit
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
D1-4-1 Gearshift, 5 Or 6 Speed Gearbox
| 13***5Z | Bolt | 6 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***2Z | Nut, M12 | 1 |
D1-3-4 Clutch Control, Circuit
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
D1-2-1 Controls, Brake & Clutch
| 13***5Z | Bolt | 1 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
D1-1-1 Brake, Parking
| 15***00 | Valve, Handbrake | 1 |
| 15***01 | Cover, Assembly | 1 |
| 15***02 | Kit, Repair | 1 |
D1-10-1 Control, Pick Up Hitch
| 13***5Z | Bolt | 6 |
| 14***9Z | Washer | 1 |
| 23***20 | Knob, Control Lever | 1 |
D2-1-1 Control, Throttle
| 13***3Z | Screw, M6x16 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
D3-1-1 Steering Wheel, Installation
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
| 12***00 | Wheel, Steering | 1 |
E Hydraulics & Air Including, Steering
E1-16-1 Circuit, Auxiliary, Free Flow Return, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***5Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-2-1 Circuit, Transmission, Cooling, 2ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-14-3 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-15-1 Circuit, Auxiliary, Free Flow Return, Rear
| 13***5Z | Nut | 1 |
| 23***11 | O Ring, 5/8"Bsp | 2 |
| 45***01 | Kit-Seal | 1 |
E1-6-1 Circuit, Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-2-2 Circuit, Transmission
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
E1-4-2 Circuit, Steering
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***6Z | Bolt, M8 X 70 | 1 |
E1-1-1 Circuit, Neutral
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***26 | Washer, Seal | 1 |
E1-20-2 Circuit, Flow Divider, Rear, Without Trailer Brake Valve
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-14-2 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 2 |
E1-11-1 Circuit, Auxiliary, 3 Spool, Front
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***4Z | Bolt, M10x60 | 1 |
E1-7-1 Circuit, Front Hitch
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 23***06 | O Ring, 3/8"Bsp | 8 |
| 24***05 | O Ring | 1 |
E1-8-1 Circuit, Auxiliary, 2 Spool, Rear
| 13***4Z | Nut, 1/2" B.S.P. | 4 |
| 24***10 | O Ring | 4 |
| 45***01 | Kit-Seal | 1 |
E1-7-2 Circuit, Front Hitch
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
E1-13-1 Circuit, Auxiliary, 3/4 Spool, Rear
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 22***53 | Circlip | 6 |
| 24***10 | O Ring | 6 |
E1-30-1 Circuit, Qrc Drain
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
E1-20-3 Circuit, Flow Divider, Rear, With Trailer Brake Valve
| 13***7Z | Bolt, M10x25 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-20-1 Circuit, Flow Divider, Rear, With Trailer Brake Valve
| 13***8Z | Screw, M8x30 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-4-1 Circuit, Steering
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***6Z | Bolt, M8 X 70 | 1 |
E1-7-3 Circuit, Front Hitch
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
E1-3-1 Circuit, Front & Rear Pto
| 13***9Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
E1-14-1 Circuit, Auxiliary, 4 Spool, Front, With Hitch
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-5-1 Circuit, Differential Lock
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 24***03 | O Ring | 1 |
| 47***33 | Adapter, M12 X 1/4" Bsp M | 1 |
E1-17-1 Circuit, In-Line, Main Relief Valve
| 13***9Z | Screw, M10x35mm | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***3Z | Nut, Lock, M10 | 4 |
E1-20-4 Circuit, Flow Divider, Rear, Without Trailer Brake Valve
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10x80 | 2 |
E2-2-1 Pump, Auxiliary, 32cc/Rev, 2ws
| 20***02 | Kit-Screw | 1 |
| 20***03 | Kit-Seal, Pump | 1 |
| 20***00 | Pump, Auxiliary, 32cc; Check Id Plate For: 550/1/35272 | 1 |
E2-2-2 Pump, Auxiliary, 40cc/Rev, 2ws
| 13***8Z | Capscrew, M12x30 | 2 |
| 20***04 | Kit-Bolt, Rear | 1 |
| 20***02 | Kit-Seal, Pump | 1 |
E2-3-2 Pump, Auxiliary, 45cc/Rev, 4ws
| 20***01 | Kit-Seal | 1 |
| 20***00 | Pump, Auxiliary, 40cc | 1 |
E2-1-1 Pump, Steer & Suspension
| 13***5Z | Capscrew | 2 |
| 20***08 | Cap | 1 |
| 20***09 | Kit-Repair, Relief Valve | 1 |
E2-10-1 Service Steer Pump, Refit Kit
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E2-1-2 Pump, Steer & Suspension
| 20***20 | Pump, Steering/Suspension | 1 |
| 20***67 | Pump, Hydraulic Gear; Use 20/92***20 | 1 |
| 20***68 | Pump, Hydraulic Gear | 1 |
E2-1-3 Pump, Steer & Suspension, Service Option
| 20***04 | Pump, Assembly, Steering/Suspension | 1 |
E2-3-1 Pump, Auxiliary, 32cc/Rev, 4ws
| 20***01 | Kit-Seal | 1 |
| 20***01 | Kit-Bolt | 1 |
| 20***00 | Hi-Flow, Manual, Double Gear Pump | 1 |
E2-2-3 Pump, Auxiliary, 45cc/Rev, 2ws
| 13***8Z | Capscrew, M12x30 | 2 |
| 20***02 | Pump, Gearbox; Use 20/20***00 Or 20/20***00 Or 20/21***00 See, Relevant Machine Parts Catalogue | 1 |
| 20***04 | Kit-Bolt, Rear | 1 |
E3-10-2 Valve, Flow Regulator, Diverter
| 25***45 | Valve, Flow Divider | 1 |
| 25***69 | Cartridge, Sequence | 1 |
| 25***70 | Valve, Directional Control, N.O. Poppet | 1 |
E3-1-1 Valve, Assembly, 2 Spool & Adapters
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E3-2-2 Valve Section, Inlet, With Adjustable Main Relief
| 25***01 | Valve, Inlet Section, C/W Adjustable Mrv | 1 |
| 25***02 | Valve, Main Relief, Cartridge | 1 |
| 25***03 | Kit-Seal | 1 |
E3-3-1 Valve, Section, 1st & 2nd Spool
| 25***02 | Valve, Section, 1st & 2nd Spools | 1 |
| 25***20 | O Ring | 1 |
| 25***22 | Cap, Spool End | 1 |
E3-12-1 Filter, Hydraulic, Tank Mounted
| 58***12 | Element, Filter, 10 Micron | 1 |
| 58***02 | O Ring | 1 |
| 58***04 | Seal | 1 |
E3-10-3 Valve, Flow Regulator, Diverter
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
| 25***72 | Kit-Seal | 1 |
E3-11-1 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
E3-13-1 Filter, Transmission Oil
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E3-7-1 Valve, Solenoid, Pressure Maintenance
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 13***8Z | Capscrew, M5 X 30 | 12 |
E3-4-1 Valve, Section, 3rd & 4th Spool
| 25***04 | Valve, Section, 3rd & 4th Spools | 1 |
| 25***20 | O Ring | 1 |
| 25***22 | Cap, Spool End | 1 |
E3-1-2 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E3-2-1 Valve Section, Inlet, With Main Relief
| 25***01 | Valve, Section, Inlet, C/W M.R.V | 1 |
| 25***11 | Valve, Main Relief | 1 |
| 25***12 | Plug | 1 |
E3-9-1 Valve, Charge
| 25***96 | Cartridge, Unloading | 1 |
| 25***76 | Kit-Seal | 1 |
| 25***67 | Kit-Seal | 1 |
E3-1-3 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E3-10-1 Valve, Flow Regulator, Diverter
| 25***02 | Coil, 12v | 1 |
| 25***00 | Valve, Priority, Flow Divider | 1 |
| 25***01 | Valve, Relief, Cartridge | 1 |
E3-8-1 Valve, Main Relief, In-Line
| 25***18 | Valve, Main Relief, In-Line | 1 |
| 25***78 | Cartridge, Main Relief | 1 |
| 25***13 | Kit-Seal | 1 |
E3-5-1 Valve, Section, Draft Control, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 1 |
| 25***01 | Kit-Solenoid | 1 |
| 25***13 | Spring, Compression | 1 |
E4-1-1 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-3-2 Ram, Steering
| 47***25 | Gaiter | 2 |
| 47***29 | Nut, Hexagonal | 1 |
| 47***30 | Kit-Seal | 1 |
E4-5-1 Ram, Rear Hitch, 80mm
| 47***53 | Nipple, Grease | 1 |
| 47***30 | Kit-Seal, 80mm Lift Ram | 1 |
| 47***31 | Cylinder | 1 |
E4-2-1 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-5-3 Ram, Rear Hitch, 80mm
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
E4-5-2 Ram, Rear Hitch, 85mm
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
E4-4-1 Ram, Front Hitch, 60mm
| 47***01 | Kit-Seal, 60mm Cyl X 30mm Rod | 1 |
| 47***02 | Nut, End | 1 |
| 47***03 | Cylinder, Ram | 1 |
E4-3-1 Ram, Steering
| 47***22 | Rod, Piston | 1 |
| 47***23 | Cylinder, Assembly, Right Hand | 1 |
| 47***24 | Cylinder, Assembly, Left Hand | 1 |
E4-2-2 Ram, Suspension, 'Cushioned', Optional 45mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***13 | Cover, Protective Tube | 1 |
F Axles, Wheels & Transmission
F1-2-2 Hub & Components, Front Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-2-1 Hub & Components, Front Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-1-2 Axle Assembly, Front, 2ws, No Spin Differential
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-4-1 Differential, Components, No Spin
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-4-2 Differential, Components, Maxtrac
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-3-1 Axle Drive Head, No Spin Differential
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-1-1 Axle Assembly, Front, 2ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-3-2 Axle Drive Head, Maxtrac
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Gear, Crown Wheel & Pinion, Ratio 32/9; Replaced By 45***84, See San 10680 | 1 |
F2-1-1 Axle Assembly, Rear, 2ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F2-4-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-2-2 Hub & Components, Rear Right Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-2-1 Hub & Components, Rear Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-3-1 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F3-3-7 Wheels & Tyres, 580/70-R26 Xm27, Michelin
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel Dw20a | 1 |
| 42***00 | Tyre, 580/70 R26 Michelin, Xm27 Tl 142 B; 2165mm Track, Max Speed 55 Kph. Nsp - Franchised Supply Only. Do Not Use If No-Spin Differential Is Fitted., Tyre, 580/70 R26 Michelin, Xm27 Tl 142 B | 1 |
F3-3-2 Wheels & Tyres, 540/65-R30 Michelin, 540/65-R30 Pirelli
| 13***5Z | Bolt, M12x20 | 2 |
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
F3-3-4 Wheels & Tyres, 520/70-R30, Pirelli
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l/30 | 1 |
| 42***00 | Tyre, 520/70-R30 Pirelli | 1 |
F3-3-3 Wheels & Tyres, 16.9-R30, Michelin
| 13***5Z | Bolt, M12x20 | 2 |
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
F3-3-1 Wheels & Tyres, 480/70r30, Pirelli
| 13***5Z | Bolt, M12x20 | 2 |
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
F3-2-1 Propshafts, Axle Drive, Rear
| 82***47 | Nut, Cleveloc | 8 |
| 82***50 | Stud, Bolt | 8 |
| 82***88 | Bolt, M10x30 | 4 |
F3-4-1 Mounting, Chock
| 33***67 | Chock, Wheel, Size 3, Folding Type | 2 |
| 47***39 | Pin, Retaining | 1 |
| 48***02 | Plate, Skid, C/W Chock Holder | 1 |
F3-3-6 Wheels & Tyres, 600/65-R28 Tm800, 620/70-R26 Xm27
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel Dw20a | 1 |
| 41***00 | Rim, Wheel, 5 Stud | 1 |
F3-3-8 Wheels & Tyres, 16.9-R30 Nokian
| 15***01 | Valve | 1 |
| 33***25 | Wheel, Assembly Nokian, 16.9r30 R/H 10 Stud | 4 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-3-5 Wheels & Tyres, 480/70-R30, Goodyear
| 13***5Z | Bolt, M12x20 | 2 |
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
F3-3-9 Wheels & Tyres, 520/65-R30 Nokian
| 15***01 | Valve | 1 |
| 33***07 | Wheel, Assembly, 52***30 Nokian | 4 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-1-1 Propshafts, Axle Drive, Front
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F5-3-1 Pipework, Gearbox Balance
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F5-4-1 Dipstick & Filler, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
F5-2-2 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-4 Transmission Gearbox, Assembly, 30kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-1 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-3 Transmission Gearbox, Assembly, 30kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F6-5-1 Shaft, Output Group, 4 Wheel Drive
| 22***63 | Circlip; Replaces 370a0100z | 1 |
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
F6-4-1 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F6-1-2 Gearbox, Range, 30kph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-1-1 Gearbox, Range, 50kph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F6-6-2 Gear Change, Air Assisted, 30kph
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-6-1 Gear Change, Air Assisted
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-7-1 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***18 | Block, Selector | 1 |
F6-2-1 Gearbox Housing
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 2 |
F7-9-1 Gearbox, 6 Speed, Remote Control Assy
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
F7-2-1 Gearbox, 5/6 Speed, Case Assemblies
| 45***12 | Bush, Selector Shaft | 2 |
| 45***13 | Plug, Cup | 2 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
F7-3-1 Gearbox, 5/6 Speed, Mainshaft Assembly
| 45***06 | Kit, Circlip | 2 |
| 45***44 | Gear, 3rd | 1 |
| 45***45 | Bearing, Needle Roller | 2 |
F7-1-1 Gearbox, 5/6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-9-3 Gearbox, 5 Speed, Remote Control Assy
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F7-6-1 Gearbox, 5/6 Speed, Front Cover Assembly
| 45***21 | Washer, Spring, M12 | 4 |
| 45***28 | Washer, Spring | 5 |
| 45***32 | Screw, M12 | 4 |
F7-8-1 Gearbox, 5/6 Speed, Selector Controls
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F7-7-1 Gearbox, 5/6 Speed, Rear Housing
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 1 |
F7-4-1 Gearbox, 5/6 Speed, Input Shaft Assembly
| 45***49 | Plunger | 3 |
| 45***50 | Roller, 8mm | 3 |
| 45***51 | Spring, Synchro | 3 |
F7-9-2 Gearbox, 5 Speed, Remote Control Assy
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
F7-5-1 Gearbox, 5/6 Speed, Counter Shaft Assy
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F7-10-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F8-7-1 Clutch Assembly, Power Take Off, Front
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 22***60 | Circlip | 1 |
F8-6-2 Gearbox, Splitter & Pto, Selector Clutch Pack
| 44***09 | Washer, Thrust | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F8-4-1 Gearbox, Splitter & Pto, Gear Group, Output & Intermediate
| 13***5Z | Bolt | 5 |
| 22***28 | Circlip | 1 |
| 22***54 | Circlip | 1 |
F8-8-1 Clutch Assembly, Power Take Off, Rear
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 22***60 | Circlip | 1 |
F8-1-1 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F8-1-2 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-6-3 Gearbox, Splitter & Pto, Selector Clutch Pack
| 44***09 | Washer, Thrust | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F8-9-1 Clutch
| 13***6Z | Bolt | 8 |
| 47***01 | Dowel | 1 |
| 47***02 | Dowel | 1 |
F8-3-1 Gearbox, Splitter & Pto, Input & Clutch Release
| 13***8Z | Screw, M8x30 | 4 |
| 13***7Z | Bolt, Coated | 5 |
| 22***58 | Circlip, Internal | 1 |
F8-10-1 Solenoid Assembly, Gearbox, Splitter & Pto
| 13***8Z | Capscrew, M5 X 30mm | 8 |
| 25***00 | Valve, Solenoid | 3 |
| 35***01 | Kit-Seal, Solenoid Valve | 1 |
F8-2-1 Gearbox, Splitter & Pto, Clutch Pack Installation
| 13***7Z | Bolt, M10x25 | 6 |
| 13***5Z | Bolt | 5 |
| 13***9Z | Screw, M10 X 35 | 21 |
F8-6-1 Gearbox, Splitter & Pto, Selector Clutch Pack
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
| 44***07 | Plate, Counter | 6 |
F8-5-1 Gearbox, Splitter & Pto, Selector Mechanism
| 13***7Z | Bolt, Coated | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***10 | Screw | 1 |
F9-2-1 Gearbox, Front P.T.O Transfer
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F9-2-2 Gearbox, Power Take Off, Front, ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F9-10-1 Power Take Off, Rear Installation
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F9-11-1 Propshaft, Power Take Off, Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-1-2 Power Take Off, Front Attachments, ( Single )
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 3 |
F9-12-2 Guard, Rear, Power Take Off, Static, French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-3-1 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-3-2 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
F9-12-1 Guard, Rear, Power Take Off
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***8Z | Bolt, M12 X 30 | 1 |
F9-1-1 Power Take Off, Front Attachments
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***0Z | Bolt, M10 X 40 | 16 |
G Brakes
G1-20-1 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 15***01 | Kit-Repair, Inverse Relay Valve | 1 |
G1-10-2 Air Drier
| 15***84 | Drier, Air, Regenerative | 1 |
| 15***05 | Cartridge, Desiccant | 1 |
| 15***06 | Kit-Heater | 1 |
G1-9-1 Brakes, Trailer Air, Single Line, Optional
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***1Z | Nut | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G1-17-3 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 99***01 | Kit-Repair, Palm Coupling, Red/Yellow | 1 |
G1-18-1 Coupling 'C', Trailer Brakes
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, 'C' Type, Female, C/W Shut Off, Red | 1 |
| 45***01 | O Ring | 1 |
G1-3-1 Brake Caliper, Rear
| 15***60 | Brake, Caliper Assembly, 60mm | 1 |
| 15***17 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***02 | Kit-Brake Pad, C/W Pins & Springs, One Axle Set | 1 |
G1-9-2 Brakes, Trailer Air, Single Line, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
G1-14-2 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-17-4 Couplings, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-14-1 Valve, Handbrake
| 15***00 | Valve, Handbrake | 1 |
| 15***01 | Cover, Assembly | 1 |
| 15***02 | Kit, Repair | 1 |
G1-5-1 Foot Brake Circuit
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
G1-8-1 Handbrake Circuit
| 47***00 | Brake, Parking Actuator | 1 |
| 64***39 | Tube, 3.5 Metres | 0 |
| 64***00 | Tube, Pvc | 0 |
G1-30-2 Brakes, Trailer, Hydraulic
| 13***3Z | Bolt, M8x130 Long | 2 |
| 15***00 | Adapter, 'T' | 1 |
| 23***10 | O Ring, 1/2"Bsp | 2 |
G1-2-1 Brake Caliper, Front
| 15***61 | Brake, Caliper Assembly, 75mm | 1 |
| 15***18 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***04 | Kit-Seal, Brake Caliper | 2 |
G1-7-1 Trailer Braking, Circuit, Twin Line Palm Coupling
| 13***5Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
G1-17-1 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm With Seal - Red | 1 |
| 45***01 | Cap, Dust, Red | 1 |
| 45***02 | Kit-Repair | 1 |
G1-17-2 Couplings, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Single Line | 1 |
| 45***01 | Kit-Repair | 1 |
| 45***02 | Cover, Dust | 1 |
G1-20-2 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-4-1 Air Charge Circuit
| 13***1Z | Screw, Hex Head, M8 X 12 | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt, M10 X 30 | 4 |
G1-21-1 Valve, Circuit Protection
| 15***00 | Valve, Circuit Protection | 1 |
G1-12-1 Valve, Footbrake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
| 47***00 | G.A. | 1 |
G1-31-1 Valve, Trailer Brake, Hydraulic
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 1 |
G1-30-1 Brakes, Trailer, Hydraulic
| 13***6Z | Bolt, M8 X 70 | 2 |
| 15***00 | Adapter, 'T' | 1 |
| 23***10 | O Ring, 1/2"Bsp | 2 |
G1-19-1 Air Coupling, Duomatic
| 45***00 | Coupling, Trailer Brake, Duomatic | 1 |
| 45***01 | Kit-Repair, Duomatic Coupling | 1 |
G1-10-1 Air Drier
| 15***00 | Drier, Air | 1 |
| 15***01 | Kit, Desiccant & Seals | 1 |
| 15***02 | Kit, Purge & Check Valves | 1 |
G1-11-2 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-16-1 Valve, Trailer Control
| 15***01 | Kit-Repair, Supply Dump Valve | 1 |
| 15***02 | Kit-Repair, Trailer Control V/V | 1 |
| 15***00 | Valve, Trailer Control | 1 |
G1-4-2 Air Charge Circuit
| 13***1Z | Screw, Hex Head, M8 X 12 | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt, M10 X 30 | 4 |
G1-7-2 Trailer Braking, Circuit, Twin Line 'C' Coupling
| 13***5Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
G1-6-1 Foot Brake, Actuator Circuit
| 13***7Z | Bolt | 4 |
| 14***11 | Seal, Bonded | 2 |
| 14***9Z | Washer | 4 |
G1-11-1 Valve, Check
| 15***00 | Valve, Non-Return | 1 |
| 15***01 | Kit-Repair, Non-Return Valve | 1 |
G1-15-1 Brake, Actuator, Parking
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
| 47***34 | Kit-Repair | 1 |
G1-1-1 Brake, System
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt, M16x50m | 2 |
| 13***9Z | Screw, M10 X 35 | 2 |
G1-13-1 Actuator, Air & Hydraulic
| 15***00 | Actuator, Air/Hydraulic | 1 |
| 15***01 | Chamber, Brake | 1 |
| 15***02 | Ring, Clamp | 1 |
S Suspension
S1-1-1 Suspension, Front
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***8Z | Bolt, M10x80 | 4 |
S2-1-1 Suspension, Rear
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
S3-1-2 Suspension, Rear, Hydraulics
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***4Z | Bolt, M6 X 60 | 2 |
S3-1-3 Suspension, Rear, Hydraulics
| 13***5Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt | 4 |
S3-1-1 Suspension, Rear, Hydraulics
| 13***5Z | Bolt | 1 |
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***8Z | Bolt | 2 |
S3-2-1 Suspension, Rear, Hydraulics, 4ws
| 13***5Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Bolt | 1 |
T Engine 1006-6ti Low Emission
T1-6-1 Timing Case, Camshaft & Gears, Yk Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-8-1 Engine Mountings
| 02***83 | Stud | 8 |
| 02***53 | Nut | 8 |
| 02***54 | Washer | 8 |
T1-2-1 Engine, Short, Yk Build
| 02***67 | Engine, Short | 1 |
T1-5-1 Fans, Pulleys, & Fan Belt, Yk Build
| 02***01 | Belt, Fan, Pair | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Yk Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T1-6-2 Timing Case, Auxiliary Drive, Yk
| 02***82 | O Ring | 1 |
| 02***61 | Plate, Compressor Mounting | 1 |
| 02***62 | Hub | 1 |
T1-7-1 Flywheel & Housing, Yk Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***82 | Seal, Felt | 1 |
T1-1-1 Engine, Complete, Yk Build
| 01***00 | Engine, Complete, 1006-6ti, Turbo-Intercooled | 1 |
| 01***25 | Engine, Complete 1006-6twhr, Turbocharged, 160bhp | 1 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Yk Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 2 |
T1-3-1 Block Assembly, Yk Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***08 | Plug | 1 |
T2-4-1 Lifting Plates, Engine, Yk Build
| 02***16 | Plate, Lifting | 1 |
| 02***19 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
T2-2-2 Rocker Assembly, Push Rods & Tappets, Yk Build
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 12 |
T2-2-1 Rocker Assembly, Push Rods & Tappets, Yk Build
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-3-1 Rocker Cover, Yk Build
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
| 02***42 | Tube, Oil Breather | 1 |
T2-1-1 Cylinder Head, Yk Build
| 02***95 | Plug, Taper | 1 |
| 02***20 | Bolt, Cylinder Head | 12 |
| 02***21 | Bolt, Cylinder Head | 18 |
T3-1-2 Cooler, Air Charge, Pipework, Yk Build
| 02***42 | Clip | 1 |
| 02***83 | Hose | 1 |
| 02***94 | Connector | 1 |
T3-3-1 Filter, Air, Yk Build
| 13***0Z | Bolt, M8x40 | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
T3-3-3 Filter Air, Yk Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 1 |
T3-4-1 Silencer & Extension, Yk Build
| 02***07 | Gasket | 1 |
| 02***16 | Nut | 6 |
| 02***70 | Stud | 6 |
T3-3-2 Filter Air, Yk Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M8x40 | 1 |
T3-1-1 Manifold, Induction, & Air Charge Cooler, Yk Build
| 02***94 | Seal | 2 |
| 02***73 | Hose, Induction | 1 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
T3-2-1 Manifold, Exhaust, Yk Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***35 | Gasket, Inlet Manifold | 1 |
| 02***36 | Manifold, Exhaust | 1 |
T4-2-2 Thermostat, Housing, Inlet & Outlet, Yk Build
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***46 | O Ring | 1 |
T4-3-1 Radiator, Fittings & Mountings
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Screw, M8 X 16 | 16 |
| 13***4Z | Bolt, M10x60 | 2 |
T4-2-1 Thermostat, Housing, Inlet & Outlet, Yk Build
| 02***95 | Plug, Taper | 1 |
| 02***46 | Plug | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
T4-1-1 Pump, Water, Yk Builds
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***41 | Kit-Repair, Water Pump | 1 |
| 02***40 | Pump, Water | 1 |
T4-4-1 Radiator & Hoses
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
T5-4-1 Filter, Oil, Yk Build
| 02***96 | Gasket | 1 |
| 02***03 | Head, Filter | 1 |
| 02***16 | Connector | 2 |
T5-1-1 Sump, Oil, & Fittings, Yk Build
| 02***05 | Insert | 2 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 1 |
T5-5-1 Cooler, Oil, & Pipework, Yk Build
| 02***14 | Seal, O Ring | 2 |
| 02***18 | Gasket, Oil Cooler Housing | 1 |
| 02***24 | Element, Oil Cooler, 7 Cell | 1 |
T5-2-1 Pump, Oil, & Relief Valve, Yk
| 02***99 | Plunger | 1 |
| 02***08 | Spring | 1 |
| 02***09 | Seat | 1 |
T5-3-1 Piston Cooling Jets, Yk
| 02***15 | Jet, Piston Cooling | 6 |
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
T6-6-2 Filter, Fuel Sediment
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***07 | Washer, Locking | 1 |
| 32***08 | Seal | 1 |
T6-3-1 Fuel Pipes, Injection Pump, Yk Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
T6-1-1 Pump, Fuel Injection, Yk Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***63 | Bracket, Support | 1 |
T6-8-1 Pump, Fuel Lift
| 02***91 | Gasket | 1 |
| 02***18 | Bolt | 4 |
| 17***02 | Filter, Screen | 1 |
T6-6-3 Filter, Fuel Sediment, Flowmeter Option
| 14***11 | Seal, Bonded | 2 |
| 32***00 | Filter, Fuel Sediment, 30 Micron | 1 |
| 32***01 | Element, Fuel Filter | 1 |
T6-7-1 Filter, Fuel, Yk Build
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Yk Build
| 02***18 | Nut | 5 |
| 02***22 | Olive | 5 |
| 02***72 | Nut | 1 |
T6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Yk Build
| 02***59 | Adapter, Union | 1 |
| 02***36 | Clamp | 1 |
| 02***37 | Clamp | 1 |
T6-4-2 Fuel Pipes, Tank To Filter, With Flowmeter, Yk Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***28 | Nut | 2 |
T6-4-1 Fuel Pipes, Tank To Filter, Yk Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 1 |
| 02***64 | Olive | 2 |
T7-2-1 Turbo, Pipework, Yk Build
| 02***58 | Union | 2 |
| 02***87 | Olive | 2 |
| 02***06 | Nut | 2 |
T7-4-2 Compressor Pipework
| 02***57 | Union | 2 |
| 02***98 | Spacer | 1 |
| 02***37 | Connector | 2 |
T7-3-1 Compressor, Air, Yk Build
| 02***73 | Bracket, Compressor Support | 1 |
| 02***74 | Spacer | 1 |
| 02***04 | Screw | 1 |
T7-3-2 Compressor, Air, Yk Build
| 02***90 | Compressor | 1 |
| 15***96 | Kit-Reed Valve | 1 |
| 15***97 | Kit-Connecting Rod | 1 |
T7-1-1 Turbocharger, Yk Build
| 02***69 | Gasket, Turbo To Manifold | 1 |
| 02***11 | Kit-Sundry Parts | 1 |
| 02***12 | Housing, Centre Assembly | 1 |
T7-2-2 Turbo, Heatshield, Yk Build
| 02***05 | Shield, Heat | 1 |
| 02***15 | Screw | 3 |
T7-4-1 Compressor Pipework
| 02***57 | Union | 2 |
| 02***98 | Spacer | 1 |
| 02***37 | Connector | 2 |
T7-5-1 Compressor, & Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 3 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
T7-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
T8-1-1 Gasket Sets, Yk Build
| 02***91 | Kit-Gasket, Top | 1 |
| 02***92 | Kit-Gasket, Bottom | 1 |
FASTRAC 2150 serial number reference
The machine identification plate is located on the chassis frame (marked as 'X' in the service manual). The plate contains the Vehicle Identification Number (VIN) and serial numbers for the engine and transmission. For machines built from serial number 740276 onward, the Fastrac 2000 series uses an improved corrosion-resistant finish on external fasteners. Verify applicability with a JCB dealer if the serial number falls outside the documented ranges or if the machine has had major unit replacements.
| Prefix | Identifies | Notes |
|---|---|---|
| 00738032-00738957 | Applicability: JCB Fastrac 2150. Source: JCB Service Manual the OEM part reference. | |
| 00740001-00740691 | Applicability: JCB Fastrac 2150ABS. Source: JCB Service Manual the OEM part reference. |
Frequently asked questions
What engine does the JCB Fastrac 2150 use?
The JCB Fastrac 2150 uses a Perkins 1000-6TW 6-cylinder diesel engine producing 158 hp (117.8 kW).
What is the operating weight of the JCB Fastrac 2150?
The operating weight is approximately 14,034 lb (6,365 kg), varying by configuration.
What replaced the JCB Fastrac 2150?
The JCB Fastrac 2150 was succeeded by the Fastrac 3000 series.
What FASTRAC 2150 owners discuss
What engine powers the JCB FASTRAC 2150, and what are its key performance specifications?
The JCB FASTRAC 2150 is powered by a Perkins 1000-6TW intercooled turbocharged diesel engine. It is a 6.0L (365.2 ci) 6-cylinder liquid-cooled unit. The engine produces 158 hp (117.8 kW) at 2200 RPM and 489.0 lb-ft (663.1 Nm) of torque at 1500 RPM. The bore and stroke are 100 x 127 mm (3.937 x 5.00 inches). The VIN code '16' corresponds to this engine rating (the OEM part reference). The fuel tank capacity is 58.1 gallons (219.9 liters). The machine was produced from 1998 to 2004.
How does the transmission and drivetrain behave, and what are the common shifting issues?
The FASTRAC 2150 features a 54-speed forward and 18-speed reverse mechanical transmission. Users report that shifting can be difficult, particularly when the tractor is cold. The gearbox is not considered ideal for heavy grain cart work compared to later models like the 3220 or 3230. The machine is 4x4 (4WD) with outboard dry disc brakes. The turning circle is limited, requiring wide headlands for implement work.
What are the typical undercarriage, brake, and wear patterns for this machine type?
The FASTRAC 2150 uses outboard dry disc brakes. A known wear pattern involves the disc brake pad calipers seizing, which can lead to overheating and potential fire risks. The park brake is also noted as less reliable. The drive train UJs and Spicer joints are subject to wear; if they fail, they can cause expensive damage to lower casings. The PUH (Power Take-Off Hitch) linkage can seize if a demount sprayer is used continuously. Steering lock is limited, and the steering system is hydrostatic power steering, which can be prone to leaks if not maintained.
What are the common electrical and sensor issues reported by owners?
Owners frequently report transmission sensor faults and hydraulic system error codes. Specific error codes include D021 and T060. Early models (pre-2000) had a reputation for electrical fires due to wiring harnesses using similar colors for different circuits, making repairs difficult. Later models in the 2000 series improved this. Electric spool valves are prone to failure and are expensive to replace; many owners convert these to manual levers. The cab air conditioning system can fail to cool adequately.
What is the consensus on the FASTRAC 2150's suitability for field work versus road work?
The FASTRAC 2150 is widely regarded as excellent for road work, hauling, and operating large demount sprayers due to its comfort, speed, and large fuel tank. It is less suitable for heavy field draft work or tight turning tasks because of its limited steering lock, large turning circle, and limited view of the drawbar. It requires ballast on the rear deck for serious draft work. Users describe it as a 'one-driver' tractor that is best suited for jobs that match its high-speed, long-stride design.
What specific items must be checked when buying a used FASTRAC 2150?
When inspecting a used FASTRAC 2150, check the following: 1) Brake calipers for seizure and signs of overheating/fire damage. 2) Drive train UJs and Spicer joints for play or wear. 3) Electric spool valves for functionality (consider manual conversion). 4) Transmission shifting, especially when cold. 5) Hydraulic system for leaks and adequate power to implements. 6) Cab air conditioning operation. 7) Wiring harness integrity, particularly in older units. 8) PUH linkage for seizure if a demount is fitted. 9) Verify the engine serial/VIN to confirm the Perkins 1000-6TW engine (VIN code 16) and not a Cummins engine found in later 3000 series models.
Are there any safety-critical fixes or maintenance items that require dealer verification?
Yes. The risk of brake caliper seizure leading to fire is a safety-critical issue. Have your dealer verify the condition of the outboard dry disc brake calipers and pads. Additionally, verify the torque settings for Dacromet fasteners versus Zinc/Yellow fasteners during any service, as they have different specifications. Have your dealer verify the CANbus diagnostic codes and sensor status for transmission and hydraulic errors.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 2150. Related factory variants of the same model family:
FASTRAC 2150
Need a specific FASTRAC 2150 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.