JCBagriculturalfastrac
Jcb FASTRAC 2125
Maintenance schedule, common problems & OEM parts breakdown
The JCB FASTRAC 2125 is a high-speed four-wheel drive agricultural tractor produced from 1998 to 2004. It is powered by a Perkins 1000-6T HR2 turbocharged diesel engine with a displacement of 6.0 liters (365.2 ci), delivering 138 hp (102.9 kW) at 2300 rpm. The machine weighs approximately 5930 kg (13,075 lb) and features a 54-speed Powershift transmission with 18 reverse gears. It is equipped with a the OEM part reference tire configuration on both front and rear axles, a wheelbase of 277 cm (109.4 in), and a rear lift capacity of 5250 kg (11,576 lb). The FASTRAC 2125 succeeded the earlier FASTRAC 1000 series and was part of the 2000 series lineup that included the 2115, 2135, and 2140 models.
Across the FASTRAC 2000 series, the primary variation lies in engine rating and transmission speed codes rather than fundamental chassis architecture. The 2125 specifically utilizes the 1000-6T HR2 engine with the OEM part reference rating code. Later serial ranges from the OEM part reference onwards may incorporate updated fastener specifications and minor emissions adjustments compared to earlier builds from serial the OEM part reference. The machine remains significant in the used market due to its robust Perkins engine reliability and the availability of aftermarket parts for the common 6.0L platform. Its high-speed capability and durable 54-speed gearbox make it a sought-after utility tractor for large-acreage farming, ensuring continued demand for service manuals and replacement components.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 2125 specifications
Engine
| Model | Perkins 1000-6T HR2 |
| Type | Turbocharged diesel, 6-cylinder, liquid-cooled |
| Displacement | 6.0 L (365.2 ci) |
| Bore/Stroke | 100 x 127 mm (3.937 x 5.00 in) |
| Gross Power | 138 hp (102.9 kW) @ 2300 RPM |
| Torque | 588 Nm (433.7 lb-ft) @ 1400 RPM |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 5930 kg (13,075 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 508 cm (200.0 in) |
| Transport Width | 278 cm (109.4 in) |
| Transport Height | 288 cm (113.4 in) |
| Wheelbase | 277 cm (109.4 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speed | 40 km/h (24.9 mph) / 50 km/h (31.1 mph) |
| Rear Lift Capacity | 5250 kg (11,576 lb) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 220 L (58.1 gal) |
| Hydraulic System | 74.2 lpm (19.6 gpm) flow; capacity not documented |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb FASTRAC 2125 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the FASTRAC 2125 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil pressure and coolant temperature gauges daily. Check the air cleaner restriction indicator before each shift; replace the element if the red plunger extends. Inspect the hydraulic oil suction strainer every 250 hours for metal particles indicating pump wear. Analyze transmission fluid for coolant ingress, which signals a failed heat exchanger core. Check the fuel filter water separator daily and drain accumulated water to prevent injector damage. Verify the condition of the drive belt for cracking or glazing during routine checks.
Corrective & Common Repairs
Address hydraulic leaks at the steering cylinder seals and swivel joints, common failure points on high-hour units. Replace worn brake pads and inspect disc rotors for scoring during routine service. Fix fuel injector line leaks by replacing copper washers and tightening fittings to specification. Repair electrical faults in the cab harness, particularly near the door hinges where wires often chafe. Replace the turbocharger inlet hose if cracked or loose to prevent boost loss. Adjust the clutch pedal free play if engagement becomes sluggish or slipping occurs.
Overhaul & Rebuild Points
Rebuild the Perkins 1000-6T engine at 10,000 hours or when compression drops below specification. Replace piston rings, liners, and bearings if oil consumption exceeds limits. Overhaul the 54-speed Powershift transmission if gear grinding or slippage occurs, requiring replacement of synchronizer rings and clutch packs. Inspect the front and rear axle planetary hubs for bearing play and seal leaks. Rebuild the hydraulic pump if flow drops below 74.2 lpm or pressure fails to hold. Replace all rubber suspension bushings if cracked or hardened to restore ride quality.
Seasonal & Environment Servicing
In cold weather, use the correct coolant mixture to prevent block freezing and ensure the battery is fully charged. Check the cab heater and air conditioning operation before summer use. Inspect the radiator and intercooler fins for chaff and dust buildup after harvest. Grease all linkage points more frequently in dusty conditions to prevent abrasive wear. Check the tire pressure regularly as temperatures drop to maintain optimal traction. Store the machine in a dry place to prevent corrosion on electrical connectors and hydraulic fittings.
FASTRAC 2125 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/921000 | Filter, Fuel Sediment, 30 Micron | Fuel system service | Check fitment → |
| 32/921001 | Element, Fuel Filter | Fuel system service | Check fitment → |
| 02/200397 | Pipe, Assembly, Fuel, L/Pump To Filter | Fuel system service | Check fitment → |
| 478/02136 | Pipe, Fuel, Flow Meter To Filter | Fuel system service | Check fitment → |
| 478/00413 | Grille, Air/Con Filter | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 2125 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| D021 | Transmission sensor malfunction | Faulty transmission speed sensor or damaged wiring connections | Inspect transmission speed sensor and wiring for damage or loose connections |
| T060 | Hydraulic system fault | Low hydraulic fluid level or faulty hydraulic pressure sensor | Check hydraulic fluid levels and inspect hydraulic pressure sensors |
| D0230 | Brakes warning symbol active | Brake system fault or low brake fluid level | Check brake fluid levels and inspect brake system components |
| K4013 | Fuel system fault | Clogged fuel filter or fuel delivery issue | Replace fuel filters and inspect fuel lines for blockages |
| P0100 | Torque Reduction AMF High Side Driver fault | Open circuit or short circuit to battery in AMF high side driver | Check AMF high side driver circuit for open or short circuits |
| P0101 | MAF Sensor Fault | Malfunctioning Mass Air Flow sensor | Inspect and clean or replace the MAF sensor |
| P0102 | Torque Reduction MAF Low Voltage Fault | Low voltage signal from MAF sensor | Check MAF sensor wiring and connector for low voltage issues |
| P0103 | Torque Reduction MAF High Voltage Fault | High voltage signal from MAF sensor | Check MAF sensor wiring and connector for high voltage issues |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Faulty crankshaft position sensor or wiring issue | Inspect crankshaft position sensor and its wiring for damage |
| P0340 | Torque Reduction Cam signal last learnt value is outside of limits | Camshaft position sensor signal out of calibration limits | Check camshaft position sensor and recalibrate if necessary |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
FASTRAC 2125 attachments & work tools
Rear Three-Point Hitch
The rear lift capacity is 5250 kg (11,576 lbs). The system utilizes a Category 3 hitch interface compatible with standard agricultural implements.
Power Take-Off (PTO)
The tractor is equipped with a rear PTO offering the OEM part reference rpm speeds. A front PTO is available as a factory option on the 2125 A configuration.
Hydraulic System
The total hydraulic flow is 74.2 lpm (19.6 gpm). Implements requiring hydraulic power connect via the rear remote outlets, with flow rates varying by configuration.
Front Loader/Attachment Interface
Specific front loader models or quick-attach coupler systems are not documented in the provided sources for the 2125. Verification of front mounting points requires consultation with the dealer or service manual.
All FASTRAC 2125 assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 2125. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-10-3 Hitch, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-11-1 Pickup Hitch
| 14***0Z | Washer, Plain | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-12-1 Top Link Assembly, Eye End, Cat Ii
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-14-2 Lift Rod Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-20-5 Drawbar, Assembly
| 13***6Z | Bolt, M20 X 70 | 2 |
| 47***03 | Pin, Recovery Hitch; Engineering Co Ltd Devon. Supp Code 13066 | 1 |
| 47***87 | Clevis | 1 |
A3-22-2 Trailer Coupling,, Ladder Hitch, 38mm, Rockinger 840ra
| 47***15 | Nipple, Grease - Drive In | 2 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-23-1 Roller Drawbar, Heavy Duty, Australian & New Zealand Builds
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-20-2 P.T.O Drawbar, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
A3-16-1 Lower Links, Cat 2
| 47***46 | Link, Assembly, Lower, Left Hand, Cat 2 | 1 |
| 47***47 | Link, Lower, Cat.2, Right Hand | 1 |
| 47***07 | Kit-Repair, Cat2 Link | 1 |
A3-2-1 Hitch Assembly
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt | 8 |
| 13***9Z | Bolt | 2 |
A3-13-1 Top Link Assembly, Eye End, Cat Iii
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-13-3 Top Link Assembly, Hook End, Cat Iii
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-10-1 Hitch, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-3-1 Front Lower Links, Cat 2
| 47***07 | Pin, Tension | 1 |
| 47***95 | Pin, Roll | 2 |
| 47***38 | Kit-Hook End | 1 |
A3-15-1 Stabiliser, Standard Compression
| 47***85 | Rod, Eye End | 1 |
| 47***86 | Spring | 1 |
| 47***87 | Rod, Connecting Link | 1 |
A3-19-1 Towing Hook
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***91 | Pin, Retaining | 1 |
A3-20-4 P.T.O Drawbar, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
A3-22-3 Trailer Coupling,, Ladder Hitch, 38mm, Rockinger 850d
| 33***21 | Coupling, Trailer Towing, Rockinger 860d01 | 1 |
| 33***34 | Kit-Lever | 1 |
| 33***35 | Kit-Spring | 1 |
A3-10-2 Hitch, Rear, Linkage
| 13***9Z | Bolt, M20 X 90 | 3 |
| 13***0Z | Bolt, M20 X 100mm | 1 |
| 13***1Z | Bolt | 2 |
A3-15-4 Stabiliser, Automatic
| 47***00 | Stabiliser, Automatic, Assembly | 1 |
| 47***83 | Housing, Recoil | 1 |
| 47***84 | Latch | 1 |
A3-13-4 Top Link Assembly, Hook End, Cat Iii
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
| 47***05 | Handle | 1 |
A3-15-2 Stabiliser, Standard Compression
| 33***96 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-20-3 P.T.O Drawbar, With Piton, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-12-4 Top Link Assembly, Hook End, Cat Ii
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
| 47***05 | Handle | 1 |
A3-30-1 Rear Deck
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 8 |
| 13***3Z | Nut, M16 | 8 |
| 14***1Z | Washer, M16 Plain | 8 |
A3-4-1 Front Towing Point
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
A3-16-2 Lower Links, Cat 3
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***08 | Kit-Repair, Cat3 Link | 1 |
A3-23-2 Roller Drawbar, Heavy Duty
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-1-2 Weight Tray Assembly, Front, With Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 41***40 | Sealant, Black Silicone, 310ml Cartridge | 0 |
A3-1-1 Weight Tray Assembly, Front, No Hitch
| 13***2Z | Bolt | 6 |
| 13***1Z | Nut | 2 |
| 13***3Z | Nut, M20 | 6 |
A3-12-3 Top Link Assembly, Hook End, Cat Ii
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-21-2 Ladder Hitch, Pto Drawbar, Fixed Offsetable With Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-21-3 Ladder Hitch, Pto Drawbar & Piton, Fixed Offsetable With Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 5 |
A3-22-4 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-20-1 Drawbar, Assembly
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-21-1 Ladder Hitch, Assembly, Rockinger
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-14-1 Lift Rod Assembly
| 47***00 | Rod, Lift Assembly | 2 |
| 47***34 | Rod, Eye End | 1 |
| 47***35 | Guard, Adjuster | 1 |
A3-30-2 Rear Deck, Weight Carrier
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***9Z | Bolt | 4 |
| 13***1Z | Bolt, Hex. Hd, M20x110 | 2 |
A3-5-1 Top Link, Front
| 47***00 | Link, Top | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-13-2 Top Link Assembly, Eye End, Cat Iii
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-12-2 Top Link Assembly, Eye End, Cat Ii
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-22-1 Trailer Coupling,, Ladder Hitch, 30mm, Rockinger 850rb
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-15-3 Stabiliser, Short
| 33***97 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
B Bodywork, Cab, Loader End
B1-4-1 Steps, Cab Access
| 13***3Z | Screw, M6x16 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
B1-1-1 Chassis & Fittings
| 13***7Z | Bolt, M10x25 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***2Z | Bolt, M16 X 50mm | 2 |
B1-3-1 Tank, Diesel Fuel
| 13***5Z | Bolt, M5 X 20mm Long | 5 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Bolt, M8 X 55 | 1 |
B1-2-2 Tank, Hydraulic, 4ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-2-1 Tank, Hydraulic, 2ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-5-1 Bonnet & Fittings
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
B1-6-3 Front Mudflaps, Optional
| 13***8Z | Screw, M8x30 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 4 |
| 47***34 | Mudflap | 2 |
B1-5-2 Bonnet & Fittings
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
B1-7-1 Quiet Build Kit
| 13***5Z | Bolt | 17 |
| 13***3Z | Nut, Self Lock, M6 | 8 |
| 14***1Z | Washer, 2 Ba | 28 |
B1-6-1 Fenders, Front
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***8Z | Screw, M8x30 | 4 |
B1-6-2 Fenders, Rear
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 8 |
B1-2-4 Tank, Hydraulic, 4ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-2-3 Tank, Hydraulic, 2ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
B2-11-14 Seat Suspension Unit, Standard, Top
| 40***05 | Kit-Lever Locking | 1 |
| 40***06 | Kit-Isolator | 1 |
| 40***07 | Kit-Handle | 1 |
B2-7-1 Cab, Console, Instrument Panel, Covers & Brackets
| 12***31 | Vent, Air Register | 4 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***5Z | Bolt | 0 |
B2-11-1 Seats, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut | 2 |
| 13***1Z | Nut, M8 | 2 |
B2-11-5 Suspension Unit, High-Spec, Fig.2
| 47***44 | Nut | 2 |
| 47***51 | Screw | 2 |
| 47***64 | Controller, Level | 1 |
B2-11-3 Seat, Suspension, (Fig 2)
| 47***70 | Washer | 1 |
| 47***83 | Washer | 8 |
| 47***17 | Nut | 8 |
B2-11-13 Seat, Suspension, Standard
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-10-1 Mirrors, External
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
B2-11-22 Seat, Passenger, Optional
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
| 40***03 | Kit-Backrest Foam | 1 |
B2-9-3 Visor, Sun
| 12***56 | Bracket | 1 |
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
B2-6-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut | 4 |
B2-11-23 Seat, Passenger
| 40***14 | Washer | 2 |
| 40***73 | Seat, Passenger | 1 |
| 40***86 | Kit-Headrest, Dynamic Yellow | 1 |
B2-11-12 Seat, Suspension, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-11-21 Seat, Passenger
| 40***00 | Seat, Suspension | 1 |
| 47***40 | Cushion, Seat | 1 |
| 47***41 | Cushion, Backrest | 1 |
B2-3-2 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***43 | Adhesive, & Sealant, 310ml Cartridge | 0 |
B2-11-11 Seat, Suspension, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 10 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 10 |
B2-3-1 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***68 | Glass, Front Quarter Light, Left Hand Clear; Replaced By 82***65, See San05392 | 1 |
| 82***69 | Glass, Front Quarter Light, Right Hand Clear; Replaced By 82***66, See San05392 | 1 |
B2-8-1 Ducts, Mouldings, Floormat & Covers
| 12***31 | Vent, Air Register | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***3Z | Screw, M6x16 | 20 |
B2-5-1 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 7 |
B2-9-2 Soundproofing, Cab Base
| 47***48 | Pin, Locating | 0 |
| 47***10 | Bracket, Harness Mounting | 2 |
| 47***12 | Panel, Insulation, Floorplate L/Hand | 1 |
B2-11-2 Seat, Suspension, High-Spec, Fig.1
| 40***00 | Seat, Suspension | 1 |
| 47***42 | Kit, Headrest | 1 |
| 47***43 | Cover | 1 |
B2-10-2 Mirrors, External
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 47***65 | Arm, Mirror, Left Hand | 1 |
B2-11-18 Seat Suspension Unit, High-Spec, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-9-1 Soundproofing, Cab
| 24***05 | Grommet | 1 |
| 24***12 | Grommet | 1 |
| 24***10 | Grommet | 1 |
B2-11-15 Seat Suspension Unit, Standard, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-11-6 Suspension Unit, High-Spec, Fig-3
| 47***44 | Nut | 6 |
| 47***51 | Screw | 2 |
| 47***66 | Circlip | 1 |
B2-4-1 Door, Left Hand
| 12***01 | Key, No. 1001 | 2 |
| 12***29 | Grommet | 1 |
| 12***30 | Grommet | 1 |
B2-11-17 Seat Suspension Unit, High-Spec, Top
| 40***03 | Kit-Level Control | 1 |
| 40***04 | Kit-Upper Suspension | 1 |
| 40***05 | Kit-Lever Locking | 1 |
B2-1-2 Cab Assembly
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 33***00 | Mounting, Metalastik, 60 | 2 |
B2-4-2 Door, Right Hand
| 12***01 | Key, No. 1001 | 2 |
| 12***79 | Bush, Hinge | 4 |
| 12***29 | Grommet | 1 |
B2-10-3 Mirrors, External
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
B2-2-1 Cab Shell, Hardware
| 12***79 | Bush, Hinge | 4 |
| 12***92 | Plate, Door Catch | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
B2-1-3 Cab Assembly
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 33***00 | Mounting, Metalastik, 60 | 2 |
B2-11-16 Seat, Suspension, High-Spec
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-12-1 Seat Belt
| 47***00 | Kit-Seat Belt, Lap Type, Kit-Seat Belt, Lap Type; Drivers Seat. Contains All Parts Necessary For Installation. | 2 |
| 47***00 | Kit-Seat Belt, Lap Type | 1 |
B2-1-1 Cab Assembly
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 33***00 | Mounting, Metalastik, 60 | 2 |
B5-1-2 Decals, External, 2ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-1-0 Identification, Serial Plates
B5-1-1 Decals, External, 2ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-1-4 Decals, External, 4ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-4-1 Decals, North American, Homologation
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
| 81***79 | Label, Warning, General | 1 |
B5-1-3 Decals, External, 2ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-1-6 Decals, External, 4ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-9-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-10-1 Lubricants & Filters
| 32***03 | Element, Primary | 1 |
| 32***04 | Element, Safety | 1 |
| 32***01 | Element, Air Filter, Main | 1 |
B5-1-5 Decals, External, 4ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-2-1 Decals, Internal
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***43 | Label, Warning French, Read Operating Book | 1 |
C Electrics-Machine, Cab & Engine
C1-5-1 Harness Connectors, Sumitomo
| 72***16 | Terminal, Crimp | 2 |
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
C1-2-1 Electrical Equipment
| 14***11 | Seal, Bonded | 1 |
| 32***30 | Indicator, Assembly | 1 |
| 45***03 | Relay, Potentiometer | 1 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Magnetic, (Yellow) | 1 |
C1-7-3 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-1-2 Battery & Isolator, Optional
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 6 |
C1-1-1 Battery & Carrier
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 6 |
| 13***1Z | Bolt, M8 X 45 | 1 |
C1-10-2 Radar Installation
| 13***3Z | Bolt | 4 |
| 47***31 | Bracket, Mounting | 1 |
| 70***00 | Radar, Ground Speed | 1 |
C1-6-2 Light, Head, Right Hand Dip
| 13***9Z | Bolt, M12x35 Grade 8.8 | 4 |
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
C1-7-2 Light, Rear Fog
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-3-1 Harnesses, Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C1-9-1 Horn, Single Tone
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Bolt, M6x55 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-9-2 Horn, Single Tone
| 13***6Z | Bolt, M6x70 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***1Z | Washer | 1 |
C1-3-3 Harnesses, Edc
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***2Z | Nut, Thin M20 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-3-2 Harnesses, Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
| 47***73 | Shield, Harness | 0 |
C1-10-1 Radar Installation
| 13***3Z | Bolt | 4 |
| 47***31 | Bracket, Mounting | 1 |
| 70***00 | Radar, Ground Speed | 1 |
C1-6-1 Light, Head, Left Hand Dip
| 13***9Z | Bolt, M12x35 Grade 8.8 | 4 |
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
C1-7-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C2-4-1 Alternator Mountings, Yh Build
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-6-1 Engine Block Heater
| 13***3Z | Nut | 2 |
| 47***89 | Bracket, Plug Mounting | 1 |
| 71***00 | Kit-Heater, Engine Block | 1 |
C2-5-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-1-1 Electrical Equipment, Yh Build
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-3-1 Alternator, 100amp
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
| 71***04 | Regulator, Assembly | 1 |
C3-12-2 Light, Working, Front & Rear
| 24***05 | Grommet | 4 |
| 70***00 | Light, Working | 2 |
| 70***00 | Light, Working | 2 |
C3-12-4 Light, Indicator, Side
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C3-12-5 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-10-1 Wash/Wipe, Windscreen
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
C3-3-3 Switches & Sensor, Rear Hitch Control, External
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 47***62 | Bracket, Position Sensor | 1 |
| 47***98 | Switch, Position Sensor | 1 |
C3-3-4 Switches & Sensor, Rear Hitch Control, External
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 1 |
C3-9-1 Cab Heater, And Air Conditioning, Installation
| 13***5Z | Bolt | 3 |
| 13***2Z | Bolt, M6 X 50 | 4 |
| 13***9Z | Bolt, M10 X 35 | 1 |
C3-3-11 Control Panel, 4ws Quadtronic
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 47***40 | Gasket | 1 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 64***00 | Tube | 0 |
| 71***01 | Jet, Windscreen Washer | 1 |
C3-5-1 Fuse Box & Relays, Rear
| 13***5Z | Bolt, M5 X 20mm Long | 7 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***1Z | Nut, M5-8 | 1 |
C3-11-1 Washer Kit, Windscreen, Left Hand Cab Step Mounted
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C3-8-1 Radio, Optional
| 24***12 | Grommet | 1 |
| 47***88 | Plate, Radio Blanking | 1 |
| 71***00 | Aerial | 1 |
C3-7-3 Ashtray & Lighter
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 26***90 | Ashtray | 1 |
C3-4-1 Fuse Box & Relays, Front
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-9-3 Filter, Air Conditioning
| 32***00 | Filter, Carbon, Cab Intake | 1 |
| 32***00 | Filter, Air, Paper; Will Be Replaced By 32/92***00 Aug 98 | 1 |
| 32***00 | Filter, Air | 1 |
C3-9-2 Air Conditioning, Unit Assembly
| 30***61 | Unit, Air Conditioning, Heater | 1 |
| 47***25 | Grommet | 1 |
| 47***01 | Case, Air/Con. Unit | 1 |
C3-6-1 Switch, Column
| 70***01 | Column, Switch Cap | 1 |
| 70***01 | Clamp | 1 |
| 70***00 | Switch, Column Indicator | 1 |
C3-12-3 Light, Working, Auxiliary
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 47***06 | Bracket, Mounting, Working Light | 2 |
C3-9-4 Air Conditioning, Unit Assembly
| 13***1Z | Screw, M4 X 12 | 7 |
| 13***3Z | Nut | 2 |
| 30***61 | Unit, Air Conditioning, Heater | 1 |
C3-12-1 Light, Head, Right Hand Dip, Auxiliary
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 24***05 | Grommet | 2 |
C3-14-2 Power Supply, Auxiliary, Without Convenience Socket
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***53 | Bracket, Mounting, Power Supply | 1 |
C3-1-1 Instrumentation, Front
| 64***01 | Tube, Air, 5 Metre Length | 0 |
| 70***32 | Cover, Switch, Main Lights | 1 |
| 70***33 | Cover, Switch, Rear Fog | 1 |
C3-3-2 Switch Panel, Draft Control
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
| 47***03 | Lever, Rotary Control, Small | 1 |
C3-3-1 Control Panel, With Rear Hitch
| 47***00 | Switch; A=Front Power Take-Off, B=2/4wd, C=Rear Power Take-Off. If Front And Rear Power Take-Off Fitted, Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fited., Switch, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only., Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fitted., Switch; A=Blanked, B=2/4wd, C=Rear Power Take-Off. If Rear Power Take-Off Only, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only | 0 |
| 47***91 | Plate, Ag Panel Switch | 1 |
| 47***35 | Plate, Ag Panel Switch | 1 |
C3-7-1 Light, Interior, Cab
| 47***12 | Bracket, Mounting, Door Light Switch | 1 |
| 47***16 | Bracket, Mounting, Door Light Switch | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
C3-2-1 Instrumentation, Rear
| 24***09 | Grommet | 3 |
| 47***25 | Plate, Switch Mounting | 1 |
| 70***00 | Push Button Black, With Microswitch | 2 |
C3-7-2 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C3-14-1 Power Supply, Auxiliary, With Convenience Socket
| 13***3Z | Screw, M6x16 | 3 |
| 13***1Z | Nut, M5-8 | 1 |
| 14***6Z | Washer, M6 | 3 |
D Controls-Machine, Engine & Steering
D1-3-5 Valve, Maintenance, Clutch Pressure
| 25***46 | Valve, Dual Check -0.5, Pressure Maintenance | 1 |
| 25***20 | Valve, Check Cartrid | 2 |
| 25***21 | Kit-Seal | 1 |
D1-8-1 Control, Valve Flow
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***31 | Screw, Grub | 2 |
D1-1-1 Brake, Parking
| 15***00 | Valve, Handbrake | 1 |
| 15***01 | Cover, Assembly | 1 |
| 15***02 | Kit, Repair | 1 |
D1-9-1 Contr0l, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***3Z | Nut | 2 |
D1-6-1 Control, 2 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 5 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-3-2 Clutch, Master Cylinder
| 15***00 | Cylinder, Clutch Master | 1 |
| 15***01 | Kit-Repair, Master Cylinder | 1 |
| 15***79 | Cylinder, Clutch Master | 1 |
D1-7-1 Control, 4 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 5 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-1-2 Brake, Parking
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
D1-5-12 Valve, Air, 4ws
| 47***69 | Adapter, Straight Connector | 1 |
| 47***05 | Adapter, Elbow | 2 |
| 47***00 | Valve, Air, 4ws | 1 |
D1-11-1 Control, Ladder Hitch Release
| 13***3Z | Screw, M6x16 | 4 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***9Z | Washer | 1 |
D1-3-4 Clutch Control, Circuit
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
D1-5-13 Gearshift, Air Assisted, Range Change, 4ws
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-5-11 Gearshift, Air Assisted, Range Change & 4ws Axle Stop
| 13***2Z | Bolt, M6 X 50 | 4 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-5-2 Valve Assembly, Pneumatic
| 47***68 | Adapter, Straight Connector | 3 |
| 47***71 | Screw, M2.5 X 25 | 8 |
| 47***72 | Gasket | 4 |
D1-3-6 Clutch Control, Circuit
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
D1-10-1 Control, Pick Up Hitch
| 13***3Z | Screw, M6x16 | 2 |
| 14***9Z | Washer | 1 |
| 23***20 | Knob, Control Lever | 1 |
D1-4-1 Gearshift, 5 Or 6 Speed Gearbox
| 12***02 | Plate, Compression | 2 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
D1-3-3 Clutch Servo, Booster
| 13***7D | Capscrew | 2 |
| 15***00 | Cylinder, Booster Master | 1 |
| 15***01 | Valve, Clutch Booster | 1 |
D1-2-1 Controls, Brake & Clutch
| 13***5Z | Bolt | 1 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
D1-5-3 Ram, Assembly, Pneumatic Gearchange
| 47***85 | Piston | 2 |
| 47***86 | Rod, Piston | 1 |
| 47***87 | Rod, Piston | 1 |
D1-5-1 Gearshift, Air Assisted, Range Change, 2ws
| 13***2Z | Bolt, M6 X 50 | 4 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-5-5 Gearshift, Air Assisted, Range Change, 2ws
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-3-1 Clutch Control, Circuit
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
D1-2-2 Splitter Dump, Inhibit, 3 Speed
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 13***1Z | Nut, M8 | 1 |
D2-1-1 Control, Throttle
| 13***3Z | Screw, M6x16 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
D3-1-1 Steering Wheel, Installation
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
| 12***00 | Wheel, Steering | 1 |
E Hydraulics & Air Including, Steering
E1-4-2 Circuit, Steering, 2ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Screw, M8x30 | 6 |
E1-20-4 Circuit, Flow Divider, Rear, Without Trailer Brake Valve
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10x80 | 2 |
E1-2-2 Circuit, Transmission
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
E1-30-1 Circuit, Qrc Drain
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
E1-6-1 Circuit, Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-14-2 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 2 |
E1-1-11 Circuit, Neutral, 4ws
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M12x30 | 2 |
E1-20-3 Circuit, Flow Divider, Rear, With Trailer Brake Valve
| 13***7Z | Bolt, M10x25 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-1-1 Circuit, Neutral, 2ws
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M12x30 | 2 |
E1-20-1 Circuit, Flow Divider, Rear, With Trailer Brake Valve
| 13***8Z | Screw, M8x30 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
E1-14-1 Circuit, Auxiliary, 4 Spool, Front, With Hitch
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-4-1 Circuit, Steering, 2ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Screw, M8x30 | 6 |
E1-20-2 Circuit, Flow Divider, Rear, Without Trailer Brake Valve
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-4-12 Circuit, Steering, 4ws, (Fig.2)
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 13***6Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-13-1 Circuit, Auxiliary, 3/4 Spool, Rear
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 22***53 | Circlip | 6 |
| 24***10 | O Ring | 6 |
E1-4-13 Circuit, Steering, 4ws, (Fig.1)
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Screw, M8x30 | 6 |
E1-7-1 Circuit, Front Hitch
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 1 |
E1-2-1 Circuit, Transmission, Cooling, 2ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-15-1 Circuit, Auxiliary, Free Flow Return, Rear
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-16-1 Circuit, Auxiliary, Free Flow Return, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 5 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 2 |
| 13***5Z | Nut | 1 |
E1-5-1 Circuit, Differential Lock
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 24***03 | O Ring | 1 |
E1-4-11 Circuit, Steering, 4ws, (Fig.1)
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Screw, M8x30 | 6 |
E1-2-11 Circuit, Transmission, Cooling, 4ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-3-1 Circuit, 2/4wd, Front & Rear Pto
| 13***9Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-17-1 Circuit, In-Line, Main Relief Valve
| 13***9Z | Screw, M10x35mm | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***3Z | Nut, Lock, M10 | 4 |
E1-8-1 Circuit, Auxiliary, 2 Spool, Rear
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 24***10 | O Ring | 4 |
| 45***01 | Kit-Seal | 1 |
E1-11-1 Circuit, Auxiliary, 3/4 Spool, Front
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut | 1 |
E2-3-2 Pump, Auxiliary, 74 Litre, 4ws
| 20***01 | Kit-Seal | 1 |
| 20***00 | Pump, Main Hydraulic, Triple | 1 |
| 20***01 | Kit-Bolt | 1 |
E2-2-1 Pump, Auxiliary, 60 Litre, 2ws
| 20***00 | Pump, Auxiliary, 25cc; Check Id Plate For : 550/1/35271 | 1 |
| 20***02 | Kit-Screw | 1 |
| 20***03 | Kit-Seal, Pump | 1 |
E2-3-1 Pump, Auxiliary, 60 Litre, 4ws
| 20***00 | Pump, Main Hydraulic, Triple | 1 |
| 20***01 | Kit-Seal | 1 |
| 20***02 | Kit-Bolt | 1 |
E2-2-3 Pump, Auxiliary, 92 Litre, 2ws
| 20***03 | Kit-Seal, Pump | 1 |
| 20***00 | Pump, Auxiliary, 40cc | 1 |
E2-1-3 Pump, Steer & Suspension, Service Option
| 20***04 | Pump, Assembly, Steering/Suspension | 1 |
E2-10-1 Service Steer Pump, Refit Kit
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E2-2-2 Pump, Auxiliary, 74 Litre, 2ws
| 20***02 | Kit-Screw | 1 |
| 20***03 | Kit-Seal, Pump | 1 |
| 20***00 | Pump, Auxiliary, 32cc; Check Id Plate For: 550/1/35272 | 1 |
E2-1-2 Pump, Steer & Suspension
| 20***20 | Pump, Steering/Suspension | 1 |
| 20***67 | Pump, Hydraulic Gear; Use 20/92***20 | 1 |
| 20***68 | Pump, Hydraulic Gear | 1 |
E2-1-1 Pump, Steer & Suspension
| 13***5Z | Capscrew | 2 |
| 20***08 | Cap | 1 |
| 20***09 | Kit-Repair, Relief Valve | 1 |
E2-3-3 Pump, Auxiliary, 92 Litre, 4ws
| 20***01 | Kit-Seal | 1 |
| 20***00 | Pump, Auxiliary, 40cc | 1 |
E3-11-1 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
E3-10-1 Valve, Flow Regulator, Diverter
| 25***02 | Coil, 12v | 1 |
| 25***00 | Valve, Priority, Flow Divider | 1 |
| 25***01 | Valve, Relief, Cartridge | 1 |
E3-2-2 Valve Section, Inlet, With Adjustable Main Relief
| 25***01 | Valve, Inlet Section, C/W Adjustable Mrv | 1 |
| 25***02 | Valve, Main Relief, Cartridge | 1 |
| 25***03 | Kit-Seal | 1 |
E3-9-1 Valve, Charge
| 25***96 | Cartridge, Unloading | 1 |
| 25***76 | Kit-Seal | 1 |
| 25***67 | Kit-Seal | 1 |
E3-14-1 Valve, Main Relief, In-Line
| 25***18 | Valve, Main Relief, In-Line | 1 |
| 25***78 | Cartridge, Main Relief | 1 |
| 25***13 | Kit-Seal | 1 |
E3-3-1 Valve, Section, 1st & 2nd Spool
| 25***02 | Valve, Section, 1st & 2nd Spools | 1 |
| 25***20 | O Ring | 1 |
| 25***22 | Cap, Spool End | 1 |
E3-1-1 Valve, Assembly, 2 Spool & Adapters
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E3-12-1 Filter, Hydraulic, Tank Mounted
| 58***12 | Element, Filter, 10 Micron | 1 |
| 58***02 | O Ring | 1 |
| 58***04 | Seal | 1 |
E3-5-1 Valve, Section, Draft Control, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 1 |
| 25***01 | Kit-Solenoid | 1 |
| 25***13 | Spring, Compression | 1 |
E3-8-1 Valve, Control, 4ws
| 13***8Z | Capscrew, M5 X 30 | 4 |
| 25***00 | Valve, Solenoid | 1 |
| 25***01 | Coil | 2 |
E3-7-1 Valve, Solenoid, Pressure Maintenance
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***9Z | Capscrew, M8 X 90mm | 2 |
| 13***8Z | Capscrew, M5 X 30 | 12 |
E3-10-3 Valve, Flow Regulator, Diverter
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
| 25***72 | Kit-Seal | 1 |
E3-2-1 Valve Section, Inlet, With Main Relief
| 25***01 | Valve, Section, Inlet, C/W M.R.V | 1 |
| 25***11 | Valve, Main Relief | 1 |
| 25***12 | Plug | 1 |
E3-10-2 Valve, Flow Regulator, Diverter
| 25***45 | Valve, Flow Divider | 1 |
| 25***69 | Cartridge, Sequence | 1 |
| 25***70 | Valve, Directional Control, N.O. Poppet | 1 |
E3-1-3 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E3-1-2 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E3-4-1 Valve, Section, 3rd & 4th Spool
| 25***04 | Valve, Section, 3rd & 4th Spools | 1 |
| 25***20 | O Ring | 1 |
| 25***22 | Cap, Spool End | 1 |
E3-13-1 Filter, Transmission Oil
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E4-6-2 Power Track Rod
| 13***8Z | Bolt, M16x80 | 4 |
| 33***90 | Ram, Assembly, 4ws Power Track Rod | 1 |
| 47***61 | Plug | 2 |
E4-5-2 Ram, Rear Hitch, 80mm
| 47***53 | Nipple, Grease | 1 |
| 47***30 | Kit-Seal, 80mm Lift Ram | 1 |
| 47***31 | Cylinder | 1 |
E4-2-1 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-2-2 Ram, Suspension, 'Cushioned', Optional 45mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***13 | Cover, Protective Tube | 1 |
E4-5-1 Ram, Rear Hitch, 75mm
| 47***00 | Ram, Rear Hitch, 75mm Dia, Hydraulic | 1 |
E4-5-3 Ram, Rear Hitch, 75mm
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
E4-1-1 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-3-2 Ram, Steering
| 47***25 | Gaiter | 2 |
| 47***29 | Nut, Hexagonal | 1 |
| 47***30 | Kit-Seal | 1 |
E4-3-1 Ram, Steering
| 47***22 | Rod, Piston | 1 |
| 47***23 | Cylinder, Assembly, Right Hand | 1 |
| 47***24 | Cylinder, Assembly, Left Hand | 1 |
E4-5-4 Ram, Rear Hitch, 80mm
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
E4-6-1 Power Track Rod
| 13***8Z | Bolt, M16x80 | 4 |
| 33***90 | Ram, Assembly, 4ws Power Track Rod | 1 |
| 47***60 | Cylinder, Power Track Rod | 1 |
E4-4-1 Ram, Front Hitch, 60mm
| 47***01 | Kit-Seal, 60mm Cyl X 30mm Rod | 1 |
| 47***02 | Nut, End | 1 |
| 47***03 | Cylinder, Ram | 1 |
F Axles, Wheels & Transmission
F1-4-2 Differential, Components, Maxtrac
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-4-1 Differential, Components, No Spin
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-2-1 Hub & Components, Front Left Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-11-2 Axle Assembly, Front, 4ws, No Spin Differential
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
F1-13-2 Axle Drive Head, Maxtrac
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-13-1 Axle Drive Head, No Spin Differential
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-2-2 Hub & Components, Front Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-1-1 Axle Assembly, Front, 2ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-11-1 Axle Assembly, Front, 4ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
F1-3-1 Axle Drive Head, No Spin Differential
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-1-2 Axle Assembly, Front, 2ws, No Spin Differential
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 8 |
F1-12-2 Hub & Components, Front Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-14-2 Differential, Components, Maxtrac, 'Maxtrac'
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-14-1 Differential, Components, No Spin Differential
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-3-2 Axle Drive Head, Maxtrac
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-12-1 Hub & Components, Front Left Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-4-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-13-1 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-12-1 Hub & Components, Rear Left Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-12-4 Hub & Components, Rear Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-14-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-2-2 Hub & Components, Rear Right Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-11-1 Axle Assembly, Rear, 4ws
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt, M16x65 | 4 |
F2-11-3 Axle Assembly, Rear, 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
F2-11-2 Axle Assembly, Rear, 4ws
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt, M16x65 | 4 |
F2-12-3 Hub & Components, Rear Left Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-12-2 Hub & Components, Rear Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-2-1 Hub & Components, Rear Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-3-1 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-13-2 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-1-1 Axle Assembly, Rear, 2ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F2-1-2 Axle Assembly, Rear, 2ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F2-3-2 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-11-4 Axle Assembly, Rear, 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
F3-3-11 Wheels & Tyres, 480/70r28, 480/70r30, 2015mm (80in.) Track
| 13***5Z | Bolt, M12x20 | 4 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15lx30, 72mm Offset, 5 Stud | 1 |
F3-3-14 Wheels & Tyres, 16.9-R30 Nokian
| 15***01 | Valve | 1 |
| 33***14 | Wheel, Assembly, 16.9r30 Nokian | 4 |
| 41***00 | Rim, Wheel, Dwl15x30, 5 Stud | 1 |
F3-3-4 Wheels & Tyres, 580/70-R26 Xm27
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw20ax26 | 1 |
F3-4-1 Wheel Chocks, German
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***65 | Chock, Wheel, Size 1, Folding Type | 2 |
| 47***27 | Clamp, Wheel Chock, Upper | 1 |
F3-3-2 Wheels & Tyres, 540/65-R28 & R30
| 13***5Z | Bolt, M12x20 | 4 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, W14lx28, 5 Stud,72"/76" Track | 1 |
F3-2-1 Propshafts, Axle Drive, Rear
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***3Z | Nut | 4 |
| 82***47 | Nut, Cleveloc | 8 |
F3-3-13 Wheels & Tyres, 16.9-R28 & R30
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15lx30, 72mm Offset, 5 Stud | 1 |
F3-3-1 Wheels & Tyres, 420/70r30,480/70r28, 480/70r30
| 13***5Z | Bolt, M12x20 | 4 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, W14lx28, 5 Stud,72"/76" Track | 1 |
F3-3-3 Wheels & Tyres, 16.9-R28 & R30
| 13***5Z | Bolt, M12x20 | 4 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, W14lx28, 5 Stud,72"/76" Track | 1 |
F3-1-1 Propshafts, Axle Drive, Front
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***00 | Propshaft, Front Axle Drive | 1 |
F3-3-5 Wheels & Tyres, 600/65-R28 Tm800, 620/70-R26 Xm27
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw18lx28, 5 Stud | 1 |
| 41***00 | Rim, Wheel, Dw20ax26 | 1 |
F3-3-12 Wheels & Tyres, 540/65-R28 & R30, 2015mm (80in) Track
| 13***5Z | Bolt, M12x20 | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15lx30, 72mm Offset, 5 Stud | 1 |
F5-3-1 Pipework, Gearbox Balance
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F5-2-1 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-4-1 Dipstick & Filler, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Bolt, M12x55 | 1 |
F5-2-2 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-4 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-3 Transmission Gearbox, Assembly, 30kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F6-5-1 Shaft, Output Group, 4 Wheel Drive
| 22***63 | Circlip; Replaces 370a0100z | 1 |
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
F6-4-1 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F6-7-1 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***18 | Block, Selector | 1 |
F6-1-2 Gearbox, Range, 30kph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-1-1 Gearbox, Range, 50kph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F6-6-2 Gear Change, Air Assisted, 30kph
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-6-1 Gear Change, Air Assisted
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-2-1 Gearbox Housing
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 2 |
F7-1-1 Gearbox, 5/6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-6-1 Gearbox, 5/6 Speed, Front Cover Assembly
| 45***21 | Washer, Spring, M12 | 4 |
| 45***28 | Washer, Spring | 5 |
| 45***32 | Screw, M12 | 4 |
F7-4-1 Gearbox, 5/6 Speed, Input Shaft Assembly
| 45***49 | Plunger | 3 |
| 45***50 | Roller, 8mm | 3 |
| 45***51 | Spring, Synchro | 3 |
F7-7-1 Gearbox, 5/6 Speed, Rear Housing
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 1 |
F7-9-2 Gearbox, 5 Speed, Remote Control Assy
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
F7-9-3 Gearbox, 5 Speed, Remote Control Assy
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F7-3-1 Gearbox, 5/6 Speed, Mainshaft Assembly
| 45***06 | Kit, Circlip | 2 |
| 45***44 | Gear, 3rd | 1 |
| 45***45 | Bearing, Needle Roller | 2 |
F7-10-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F7-2-1 Gearbox, 5/6 Speed, Case Assemblies
| 45***12 | Bush, Selector Shaft | 2 |
| 45***13 | Plug, Cup | 2 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
F7-9-1 Gearbox, 6 Speed, Remote Control Assy
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
F7-8-1 Gearbox, 5/6 Speed, Selector Controls
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F7-5-1 Gearbox, 5/6 Speed, Counter Shaft Assy
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F8-6-3 Gearbox, Splitter & Pto, Selector Clutch Pack
| 44***09 | Washer, Thrust | 1 |
| 44***03 | Washer, Thrust; Replaced By 44***08, See San05152 | 1 |
| 44***04 | Retainer, Spring | 1 |
F8-10-1 Solenoid Assembly, Gearbox, Splitter & Pto
| 13***8Z | Capscrew, M5 X 30mm | 8 |
| 25***00 | Valve, Solenoid | 3 |
| 35***01 | Kit-Seal, Solenoid Valve | 1 |
F8-6-2 Gearbox, Splitter & Pto, Selector Clutch Pack
| 44***09 | Washer, Thrust | 1 |
| 44***03 | Washer, Thrust; Replaced By 44***08, See San05152 | 1 |
| 44***04 | Retainer, Spring | 1 |
F8-1-1 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F8-4-2 Gearbox, Splitter & Pto, Gear Group, Output & Intermediate
| 13***5Z | Bolt | 5 |
| 22***28 | Circlip | 1 |
| 22***54 | Circlip | 1 |
F8-3-1 Gearbox, Splitter & Pto, Input & Clutch Release
| 13***8Z | Screw, M8x30 | 4 |
| 13***7Z | Bolt, Coated | 5 |
| 13***8Z | Capscrew, M5 X 30mm | 12 |
F8-2-1 Gearbox, Splitter & Pto, Clutch Pack Installation
| 13***7Z | Bolt, M10x25 | 6 |
| 13***5Z | Bolt | 5 |
| 13***9Z | Screw, M10 X 35 | 21 |
F8-1-2 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-5-1 Gearbox, Splitter & Pto, Selector Mechanism
| 13***7Z | Bolt, Coated | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***10 | Screw | 1 |
F8-4-1 Gearbox, Splitter & Pto, Gear Group, Output & Intermediate
| 13***5Z | Bolt | 5 |
| 22***28 | Circlip | 1 |
| 22***54 | Circlip | 1 |
F8-7-1 Clutch Assembly, Power Take Off, Front
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 22***60 | Circlip | 1 |
F8-6-1 Gearbox, Splitter & Pto, Selector Clutch Pack
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
| 44***07 | Plate, Counter | 6 |
F8-8-1 Clutch Assembly, Power Take Off, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 21***04 | Dowel | 3 |
| 22***60 | Circlip | 1 |
F8-9-1 Clutch
| 13***6Z | Bolt | 8 |
| 47***01 | Dowel | 1 |
| 47***02 | Dowel | 1 |
F9-2-1 Gearbox, Front P.T.O Transfer
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F9-3-2 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
F9-3-1 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-12-1 Guard, Rear, Power Take Off
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt, M12x20 | 3 |
| 13***3Z | Nut, Lock, M10 | 2 |
F9-11-1 Propshaft, Power Take Off, Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-10-1 Power Take Off, Rear Installation
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F9-1-1 Power Take Off, Front Attachments
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***0Z | Bolt, M10 X 40 | 16 |
F9-12-2 Guard, Rear, Power Take Off, Static, French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-2-2 Gearbox, Power Take Off, Front, ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F9-1-2 Power Take Off, Front Attachments, ( Single )
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 3 |
G Brakes
G1-3-11 Brake Caliper, Rear, 4ws
| 15***62 | Brake, Caliper Assembly, 60mm | 1 |
| 15***19 | Kit-Brake Pad, C/W Pins & Springs | 1 |
| 47***08 | Nipple, Grease | 1 |
G1-20-1 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 15***01 | Kit-Repair, Inverse Relay Valve | 1 |
G1-13-1 Actuator, Air & Hydraulic
| 15***00 | Actuator, Air/Hydraulic | 1 |
| 15***01 | Chamber, Brake | 1 |
| 15***02 | Ring, Clamp | 1 |
G1-17-2 Couplings, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Single Line | 1 |
| 45***01 | Kit-Repair | 1 |
| 45***02 | Cover, Dust | 1 |
G1-18-1 Coupling 'C', Trailer Brakes
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, 'C' Type, Female, C/W Shut Off, Red | 1 |
| 45***01 | O Ring | 1 |
G1-15-1 Brake, Actuator, Parking
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
| 47***34 | Kit-Repair | 1 |
G1-30-2 Brakes, Trailer, Hydraulic
| 13***3Z | Bolt, M8x130 Long | 2 |
| 15***00 | Adapter, 'T' | 1 |
| 23***10 | O Ring, 1/2"Bsp | 2 |
G1-6-1 Foot Brake, Actuator Circuit
| 13***7Z | Bolt | 4 |
| 14***11 | Seal, Bonded | 2 |
| 14***9Z | Washer | 4 |
G1-2-1 Brake Caliper, Front
| 15***61 | Brake, Caliper Assembly, 75mm | 1 |
| 15***18 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***04 | Kit-Seal, Brake Caliper | 2 |
G1-7-2 Trailer Braking, Circuit, Twin Line 'C' Coupling
| 13***5Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
G1-17-4 Couplings, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-10-2 Air Drier
| 15***84 | Drier, Air, Regenerative | 1 |
| 15***05 | Cartridge, Desiccant | 1 |
| 15***06 | Kit-Heater | 1 |
G1-9-1 Brakes, Trailer Air, Single Line, Optional
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***1Z | Nut | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G1-4-1 Air Charge Circuit
| 13***1Z | Screw, Hex Head, M8 X 12 | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt, M10 X 30 | 4 |
G1-1-1 Brake, System, 2ws
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 1 |
G1-14-1 Valve, Handbrake
| 15***00 | Valve, Handbrake | 1 |
| 15***01 | Cover, Assembly | 1 |
| 15***02 | Kit, Repair | 1 |
G1-3-1 Brake Caliper, Rear, 2ws
| 15***60 | Brake, Caliper Assembly, 60mm | 1 |
| 15***17 | Kit-Brake Pad, C/W Pins And Springs, One Axle Set | 1 |
| 47***02 | Kit-Brake Pad, C/W Pins & Springs, One Axle Set | 1 |
G1-9-2 Brakes, Trailer Air, Single Line, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
G1-14-2 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-31-1 Valve, Trailer Brake, Hydraulic
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 1 |
G1-20-2 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-4-2 Air Charge Circuit
| 13***1Z | Screw, Hex Head, M8 X 12 | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt, M10 X 30 | 4 |
G1-21-1 Valve, Circuit Protection
| 15***00 | Valve, Circuit Protection | 1 |
G1-17-3 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 99***01 | Kit-Repair, Palm Coupling, Red/Yellow | 1 |
G1-30-1 Brakes, Trailer, Hydraulic
| 13***3Z | Bolt, M8x130 Long | 2 |
| 15***00 | Adapter, 'T' | 1 |
| 23***10 | O Ring, 1/2"Bsp | 2 |
G1-19-1 Air Coupling, Duomatic
| 45***00 | Coupling, Trailer Brake, Duomatic | 1 |
| 45***01 | Kit-Repair, Duomatic Coupling | 1 |
G1-5-1 Foot Brake Circuit
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
G1-12-1 Valve, Footbrake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
| 47***00 | G.A. | 1 |
G1-8-1 Handbrake Circuit
| 47***00 | Brake, Parking Actuator | 1 |
| 64***39 | Tube, 3.5 Metres | 0 |
| 64***00 | Tube, Pvc | 0 |
G1-10-1 Air Drier
| 15***00 | Drier, Air | 1 |
| 15***01 | Kit, Desiccant & Seals | 1 |
| 15***02 | Kit, Purge & Check Valves | 1 |
G1-1-11 Brake, System, 4ws
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt, M16x50m | 2 |
G1-11-2 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-16-1 Valve, Trailer Control
| 15***01 | Kit-Repair, Supply Dump Valve | 1 |
| 15***02 | Kit-Repair, Trailer Control V/V | 1 |
| 15***00 | Valve, Trailer Control | 1 |
G1-7-1 Trailer Braking, Circuit, Twin Line Palm Coupling
| 13***5Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
G1-17-1 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm With Seal - Red | 1 |
| 45***01 | Cap, Dust, Red | 1 |
| 45***02 | Kit-Repair | 1 |
G1-11-1 Valve, Check
| 15***00 | Valve, Non-Return | 1 |
| 15***01 | Kit-Repair, Non-Return Valve | 1 |
S Suspension
S1-1-1 Suspension, Front
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***9Z | Bolt, M16 X 35mm | 2 |
| 13***8Z | Bolt, M10x80 | 4 |
S2-1-1 Suspension, Rear 2ws
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
S2-2-1 Suspension, Rear, 4ws
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
S3-1-1 Suspension, Rear, Hydraulics, 2ws
| 13***5Z | Bolt | 1 |
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
S3-1-2 Suspension, Rear, Hydraulics, 2ws
| 13***5Z | Bolt | 1 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Bolt, M8 X 45 | 1 |
S3-2-2 Suspension, Rear, Hydraulics, 4ws
| 13***5Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt | 4 |
S3-2-1 Suspension, Rear, Hydraulics, 4ws
| 13***5Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Bolt | 1 |
T Engine
T1-8-1 Engine Mountings
| 02***83 | Stud | 8 |
| 02***53 | Nut | 8 |
| 02***54 | Washer | 8 |
T1-1-2 Engine, Complete, Yh Build
| 01***00 | Engine, Complete, 1006-6thr2, Turbocharged, 142bhp | 1 |
| 01***23 | Engine, Complete 1006-6thr2, Turbocharged, 142bhp | 1 |
T1-1-3 Engine, Complete, Yh Build
| 01***00 | Engine, Complete, 1006-6thr3, Turbocharged, 153bhp | 1 |
| 01***24 | Engine, Complete 1006-6thr3, Turbocharged, 153bhp | 1 |
T1-2-1 Engine, Short, Yh Build
| 02***67 | Engine, Short | 1 |
T1-1-1 Engine, Complete, Yh Build
| 01***00 | Engine, Complete, 1006-6thr1, Turbocharged, 127bhp | 1 |
| 01***22 | Engine, Complete 1006-6thr1, Turbocharged, 127bhp | 1 |
T1-6-1 Timing Case, Camshaft & Gears, Yh Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-5-2 Fans, Pulleys, & Fan Belt, Yh Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Yh Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 2 |
T1-7-1 Flywheel & Housing, Yh Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***82 | Seal, Felt | 1 |
T1-6-2 Timing Case, Camshaft & Gears, Yh Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-5-1 Fans, Pulleys, & Fan Belt, Yh Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-6-11 Timing Case, Auxiliary Drive, Yh Builds
| 02***82 | O Ring | 1 |
| 02***61 | Plate, Compressor Mounting | 1 |
| 02***62 | Hub | 1 |
T1-3-1 Block Assembly, Yh Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***08 | Plug | 1 |
T1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Yh Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T2-4-1 Lifting Plates, Engine, Yh Build
| 02***16 | Plate, Lifting | 1 |
| 02***19 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
T2-3-1 Rocker Cover, Yh Build
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
| 02***42 | Tube, Oil Breather | 1 |
T2-1-1 Cylinder Head, Yh Build
| 02***95 | Plug, Taper | 1 |
| 02***20 | Bolt, Cylinder Head | 12 |
| 02***21 | Bolt, Cylinder Head | 18 |
T2-2-1 Rocker Assembly, Push Rods & Tappets, Yh Build
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-1-2 Cylinder Head, Yh Build
| 02***95 | Plug, Taper | 1 |
| 02***16 | Plug | 6 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-2-2 Rocker Assembly, Push Rods & Tappets, Yh Build
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 12 |
T3-3-2 Filter, Air, Yh Builds
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M8x40 | 1 |
T3-3-3 Filter, Air, Yh Builds
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 1 |
T3-4-1 Silencer & Extension, Yh Build
| 02***19 | Gasket | 1 |
| 02***16 | Nut | 6 |
| 02***70 | Stud | 6 |
T3-4-2 Silencer & Extension, Yh Build
| 02***19 | Gasket | 1 |
| 02***16 | Nut | 6 |
| 02***70 | Stud | 6 |
T3-1-1 Manifold, Induction, Yh Build
| 02***07 | Hose, Induction | 1 |
| 02***33 | Manifold, Induction | 1 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
T3-2-1 Manifold, Exhaust, Yh Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***35 | Gasket, Inlet Manifold | 1 |
| 02***36 | Manifold, Exhaust | 1 |
T3-3-1 Filter, Air, Yh Builds
| 13***0Z | Bolt, M8x40 | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
T4-2-1 Thermostat, Housing, Inlet & Outlet, Yh Build
| 02***95 | Plug, Taper | 1 |
| 02***46 | Plug | 1 |
| 02***42 | Housing, Thermostat | 1 |
T4-4-1 Radiator & Hoses
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
T4-2-2 Thermostat, Housing, Inlet & Outlet, Yh Build
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***46 | O Ring | 1 |
T4-1-1 Pump, Water, Yh Builds
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***40 | Pump, Water | 1 |
| 02***41 | Kit-Repair, Water Pump | 1 |
T4-3-1 Radiator, Fittings & Mountings
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Screw, M8 X 16 | 16 |
| 13***4Z | Bolt, M10x60 | 2 |
T5-5-1 Cooler, Oil, & Pipework, Yh Build
| 02***14 | Seal, O Ring | 2 |
| 02***18 | Gasket, Oil Cooler Housing | 1 |
| 02***24 | Element, Oil Cooler, 7 Cell | 1 |
T5-1-1 Sump, Oil, & Fittings, Yh Builds
| 02***05 | Insert | 2 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 1 |
T5-4-1 Filter, Oil, Yh Builds
| 02***96 | Gasket | 1 |
| 02***03 | Head, Filter | 1 |
| 02***16 | Connector | 2 |
T5-3-1 Piston Cooling Jets, Yh Builds
| 02***15 | Jet, Piston Cooling | 6 |
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
T5-2-1 Pump, Oil, & Relief Valve, Yh Builds
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Yh Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
T6-1-3 Pump, Fuel Injection, Yh Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***86 | Bracket | 1 |
T6-3-2 Fuel Pipes, Injection Pump, Yh Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
T6-6-2 Filter, Fuel Sediment
| 32***07 | Washer, Locking | 1 |
| 32***08 | Seal | 1 |
| 32***09 | Bowl, Assembly | 1 |
T6-6-3 Filter, Fuel Sediment, Flowmeter Option
| 14***11 | Seal, Bonded | 2 |
| 32***00 | Filter, Fuel Sediment, 30 Micron | 1 |
| 32***01 | Element, Fuel Filter | 1 |
T6-4-1 Fuel Pipes, Tank To Filter, Yh Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***64 | Olive | 4 |
T6-7-1 Filter, Fuel, Yh Build
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-1-2 Pump, Fuel Injection, Yh Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***86 | Bracket | 1 |
T6-1-1 Pump, Fuel Injection, Yh Build
| 02***63 | Bracket, Support | 1 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
T6-8-1 Pump, Fuel Lift
| 02***91 | Gasket | 1 |
| 02***18 | Bolt | 4 |
| 17***02 | Filter, Screen | 1 |
T6-2-2 Injectors, Fuel, & Injection Pipes, Yh Build
| 02***59 | Adapter, Union | 1 |
| 02***48 | Clamp | 1 |
| 02***49 | Clamp | 1 |
T6-3-1 Fuel Pipes, Injection Pump, Yh Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
T6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-4-2 Fuel Pipes, Tank To Filter, Flowmeter Option, Yh Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***28 | Nut | 2 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Yh Build
| 02***59 | Adapter, Union | 1 |
| 02***48 | Clamp | 1 |
| 02***49 | Clamp | 1 |
T7-3-1 Compressor, Air, Yh Build
| 02***73 | Bracket, Compressor Support | 1 |
| 02***74 | Spacer | 1 |
| 02***04 | Screw | 1 |
T7-4-1 Compressor Pipework
| 02***57 | Union | 2 |
| 02***98 | Spacer | 1 |
| 02***37 | Connector | 2 |
T7-1-2 Turbocharger, Yh Build
| 02***69 | Gasket, Turbo To Manifold | 1 |
| 02***10 | Turbocharger | 1 |
| 02***11 | Kit-Sundry Parts | 1 |
T7-1-1 Turbocharger, Yh Build
| 02***69 | Gasket, Turbo To Manifold | 1 |
| 02***70 | Turbocharger | 1 |
| 02***71 | Housing, Centre, Assembly | 1 |
T7-3-2 Compressor, Air, Yh Build
| 02***90 | Compressor | 1 |
| 15***96 | Kit-Reed Valve | 1 |
| 15***97 | Kit-Connecting Rod | 1 |
T7-5-1 Compressor, & Installation, Air Conditioning, Yh Build
| 13***9Z | Bolt, M10 X 35 | 3 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
T7-2-1 Turbo, Pipework, Yh Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***06 | Nut | 1 |
T7-2-2 Turbo, Heatshield, Yh Build
| 02***05 | Shield, Heat | 1 |
| 02***15 | Screw | 3 |
T7-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
T7-4-2 Compressor Pipework
| 02***57 | Union | 2 |
| 02***98 | Spacer | 1 |
| 02***37 | Connector | 2 |
T8-1-1 Gasket Sets, Yh Build
| 02***91 | Kit-Gasket, Top | 1 |
| 02***92 | Kit-Gasket, Bottom | 1 |
FASTRAC 2125 serial number reference
Locate the stamped serial number on the chassis frame or the riveted identification plate inside the cab. Confirm applicability with a JCB dealer if the serial number falls outside the documented ranges or if the machine configuration differs from the standard Fastrac 2000 series.
| Prefix | Identifies | Notes |
|---|---|---|
| 00738212-00738884 | FASTRAC 2125 | |
| 00740111-00740268 | FASTRAC 2125 |
Frequently asked questions
What engine does the JCB FASTRAC 2125 use?
The JCB FASTRAC 2125 uses a Perkins 1000-6T HR2 turbocharged diesel engine with a 6.0-liter (365.2 ci) displacement, producing 138 hp (102.9 kW).
What is the operating weight of the JCB FASTRAC 2125?
The operating weight of the JCB FASTRAC 2125 is approximately 5930 kg (13,075 lb), varying slightly by configuration and attachments.
What model replaced the JCB FASTRAC 2125?
The JCB FASTRAC 2125 was succeeded by the FASTRAC 2000 series updates and later models such as the FASTRAC 2155 and 2170, which featured updated Perkins engines and improved transmissions.
What FASTRAC 2125 owners discuss
What engine powers the JCB FASTRAC 2125, and what are its key specifications?
The JCB FASTRAC 2125 is powered by a Perkins 1000-6T HR2 turbocharged diesel engine. It is a 6-cylinder, liquid-cooled unit with a displacement of 365.2 cubic inches (6.0 liters). The engine produces 138 hp (102.9 kW) of power and 430.0 lb-ft (583.1 Nm) of torque at 1400 rpm, with a rated speed of 2300 rpm.
How do owners describe the transmission and gear-shifting behavior of the FASTRAC 2125?
The FASTRAC 2125 uses a synchromesh transmission with 36 forward and 12 reverse gears, organized into six gears across three ranges (low, medium, high) plus reverse. Owners report that shifting can be difficult, particularly when the tractor is cold. The transmission is described as noisy and requiring frequent maintenance compared to modern alternatives.
What are the common hydraulic and electrical issues associated with this model?
Owners have reported hydraulic leaks and low pressure in the system. Electrical issues are significant; early models had a reputation for electrical fires due to wiring harnesses using similar colors for all wires, making troubleshooting difficult. Additionally, electric hydraulic spool valves on later variants are prone to failure, often necessitating conversion to manual levers to avoid high replacement costs.
What undercarriage and wear patterns are typical for the FASTRAC 2125?
The FASTRAC 2125 features outboard disc brakes, which prevent oil contamination but require regular pad replacement. The PUH (Power Take-Off) linkage can seize if a demount sprayer is used continuously. Spicer joints in the drive train are known to fail, which can damage lower casings. The steering lock is not a strong point, resulting in a large turning circle that complicates field work.
How does the FASTRAC 2125 perform in field draft work versus road transport?
The FASTRAC 2125 is considered ideal for road transport, offering superior comfort and reduced driver fatigue compared to conventional tractors. However, it is not rated for serious draft work; it lacks the pulling power of standard tractors and requires significant rear ballast for field tasks. The limited view of the drawbar and poor turning circle make it less suitable for implement work.
What specific items must be checked when buying a used FASTRAC 2125?
When purchasing a used FASTRAC 2125, verify the serial number against the service manual ranges. Inspect the electric hydraulic spool valves for functionality, check the PUH linkage for seizure, examine the outboard brake pads for wear, and test the steering lock mechanism. Ensure the wiring harness is intact and properly traced, as color-coding issues can lead to electrical faults.
What safety-critical fix is associated with the braking system?
Disc brake pad calipers can seize, leading to overheating and potential fires. Have your dealer verify the condition of the brake calipers and the operation of the parking brake mechanism to ensure they are not compromised.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 2125. Related factory variants of the same model family:
FASTRAC 2125
Need a specific FASTRAC 2125 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.