JCBagriculturalfastrac
Jcb FASTRAC 155T
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 155 is a four-wheel-drive agricultural tractor produced from 1993 to 1997. It is powered by a Perkins 1000-6 T4 6.0L turbocharged diesel engine delivering 168 hp (125.3 kW) and 444.0 lb-ft (602.1 Nm) of torque. The machine features a 36-speed synchromesh transmission with a two-speed electro-hydraulic powershift, offering top speeds of 40, 55, 65, or 75 kph depending on configuration. Operating weight ranges from 6520 kg (14374 lbs) depending on tire and hitch options. It succeeded the Fastrac 135 and was part of the initial Fastrac generation before the introduction of the 2115 series. Configurations included standard cab with air conditioning, independent front and rear PTOs, and optional front hitch and lift.
The Fastrac 155 introduced a unique full-suspension chassis with coil springs and shock absorbers on the front axle and hydraulic accumulators on the rear, designed for high-speed road transport and operator comfort. This generation marked JCB's entry into the high-horsepower, high-speed agricultural market with a rigid frame and four equal-sized tires. In the used and parts market, the 155 remains significant due to its robust Perkins engine and the availability of specialized suspension components that are not interchangeable with later Fastrac models. The 155T designation typically refers to specific trim or regional variants within this 1993-1998 production window, sharing the core 155 chassis and powertrain but potentially differing in cab equipment or emission standards.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 155T specifications
Engine
| Model | Perkins 1000-6 T4 |
| Configuration | Turbocharged diesel, 6-cylinder, liquid-cooled |
| Displacement | 6.0 L (365.2 cu·in) |
| Bore x Stroke | 100.0 mm x 127.0 mm (3.94 in x 5 in) |
| Gross Power | 170.4 PS (125.3 kW; 168.0 HP) at 2,400 rpm |
| Torque | 602.0 N·m (443.7 ft·lb) at 1,400 rpm |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 6,520 kg (14,374 lbs) *Tractor equipped with the OEM part reference tires, front pto, and front hitch |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 5,760 mm (227 in) |
| Transport Width | 2,480 mm (98 in) |
| Transport Height | 2,890 mm (114 in) |
| Wheelbase | 3,000 mm (118.5 in) |
| Ground Clearance | 480 mm (19 in) |
| Front Tread | 1,870 mm (74 in) |
| Rear Tread | 1,870 mm (74 in) |
Performance
| Travel Speeds | 0.8 to 39.5 mph (varies by configuration/series) |
| Rear Lift Capacity (at ends) | 6,000 kg (13,230 lbs) / 7,000 kg (15,435 lbs) varies by configuration/series |
| Front Lift Capacity | 3,000 kg (6,615 lbs) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 280.0 L (74 US gal) |
| Hydraulic System | 60.0 L (15.85 US gal) / 76.8 L (20.3 US gal) varies by configuration/series |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
FASTRAC 155T fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 15.0–16.5 liters (3.96–4.36 US gal) | JCB Genuine Engine Oil; viscosity varies by climate per JCB specifications |
| Cooling system | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Fuel tank | 280.1 liters (74 US gal) | Diesel fuel |
| Transmission/powertrain compartments | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Final drives | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system AND tank | 60.0 liters (15.85 US gal) / 76.8 liters (20.3 US gal) | JCB Genuine Hydraulic Oil; Castrol HLP 46 or equivalent |
| Axles/differentials | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease | N/A | JCB Multi-Purpose Grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb FASTRAC 155T maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the FASTRAC 155T beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil for fuel dilution and coolant intrusion, common in high-hour Perkins 1000-6 engines. Check hydraulic fluid for milky appearance indicating water ingress through the breather. Analyze transmission oil for gear wear metals, as the 36-speed synchromesh gearbox is sensitive to fluid degradation. Inspect axle hub oil for grit, which signals failed axle seal integrity. Track coolant pH levels to prevent corrosion in the aluminum cylinder head. Use JCB-approved hydraulic fluid to maintain accumulator pressure stability.
Corrective & Common Repairs
Address synchromesh transmission grinding by inspecting synchronizer rings and shift forks for wear. Replace worn electro-hydraulic clutch actuator seals to restore PTO engagement. Fix hydraulic leaks at the control valve O-rings and pump shaft seals. Repair front axle suspension ball joints and shock absorber mounts to restore ride quality. Replace worn pneumatic dry disc brake pads and drums. Fix steering linkage play by replacing tie rod ends and drag link bushings.
Overhaul & Rebuild Points
Rebuild the Perkins 1000-6 engine at 10,000 hours or upon loss of compression, focusing on piston rings and valve seats. Overhaul the transmission clutch packs when slippage occurs, replacing friction and counter plates. Rebuild the hydraulic pump if flow drops below specification or pressure relief valves fail. Replace all axle seal kits and bearing sets during hub oil changes if contamination is detected. Recondition the turbocharger if shaft play exceeds limits or compressor blades are damaged. Inspect the rigid frame for stress cracks near the suspension mounting points.
Seasonal & Environment Servicing
In cold climates, use low-temperature hydraulic fluid and ensure the fuel water separator is drained daily to prevent gelling. Check the battery electrolyte level and charge state before winter storage. Inspect the cab heater core and blower motor for proper operation. In dusty conditions, clean the air cleaner pre-filter daily and check the restriction indicator frequently. Flush the cooling system with fresh coolant to prevent freezing. Lubricate all chassis points with grease suitable for the ambient temperature to prevent binding.
FASTRAC 155T common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 02/910150 | Element, Fuel Filter, Water Seperator | Fuel system service | Check fitment → |
| 02/910155 | Element, Fuel Filter, Cartridge | Fuel system service | Check fitment → |
| 32/401102 | Kit-Element, Fuel Filter, Short | Fuel system service | Check fitment → |
| 32/911700 | Filter, Fuel | Fuel system service | Check fitment → |
| 32/911701 | Element, Fuel Filter, Spin-On Canister | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 155T attachments & work tools
Rear Three-Point Hitch
Category III/IIIN linkage with electronic draft control. Standard rear lift capacity is 6001 kg (13230 lbs); an optional configuration increases this to 7001 kg (15435 lbs) at the hitch ends.
Front Hitch
Category II hitch available as an optional front-mounted attachment. The front lift capacity is rated at 3000 kg (6615 lbs).
Power Take-Off (PTO)
Independent rear PTO with electro-hydraulic clutch, offering the OEM part reference rpm (at the OEM part reference engine rpm) or 1000 rpm (at 2196 engine rpm) options. An independent front PTO is also available with the OEM part reference rpm or 1000 rpm configurations.
Hydraulic System
Standard hydraulic reservoir capacity is 60.0 L (15.85 gal); an optional larger tank of 76.8 L (20.3 gal) is available. The system operates at 210.0 bar (3045 psi) with a standard pump flow of 60.0 lpm (15.85 gpm) and two control valves.
Trailer Coupling
Ladder hitch couplings for low and high speed applications are available as factory options, sourced through JCB Landpower.
Cab & Climate Control
Standard cab includes air conditioning. Optional trailer brake systems are available in pneumatic or hydraulic configurations.
All FASTRAC 155T assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 155T. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-2-18 Trailer Coupling, Ladder Hitch, 248rd, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 3 |
| 47***15 | Nipple, Grease - Drive In | 2 |
A3-2-2 Claw Hitch Cat.2, Cbm
| 47***45 | Hook, Assembly, Front Hitch; For Use With 47***84, Item 4 On A3-4-1. Weld On | 1 |
| 47***46 | Pin, Roll | 2 |
| 47***47 | Latch, Claw | 1 |
A3-2-17 Trailer Coupling, Ladder Hitch, Low & High Speed, Scharmuller
| 47***00 | Coupling, Ladder Hitch, Pin = 30mm O/D; Tractor Weight 9500 Kg. Operating Speeds Up To & Including 40 Kph, Coupling, Ladder Hitch, Pin = 30mm O/D; Not For Use In Italy. For Tractor Operating Speeds Of 40km/H & Less. | 1 |
| 47***00 | Coupling, Ladder Hitch, Pin = 38mm O/D; Not For Use In Italy. For Tractor Operating Speeds In Excess Of 40 Km/H, Coupling, Ladder Hitch, Pin = 38mm O/D; For Central Trailer Axle Weight 13000 Kg. For Operating Speeds Above 40 Kph | 1 |
| 47***00 | Coupling, Ladder Hitch, Pin = 30mm | 1 |
A3-20-1 Top Link Assembly, Hook Type
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-12-1 Hitch Assembly, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-5-1 Front Din 3 Plate, & Tow Point
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***4Z | Bolt, M16x60 | 4 |
A3-17-2 Stabiliser
| 47***85 | Rod, Eye End | 1 |
| 47***86 | Spring | 1 |
| 47***87 | Rod, Connecting Link | 1 |
A3-2-16 Trailer Coupling, Ladder Hitch, Scharmuller
| 47***00 | Coupling, Ladder Hitch, Non-Automatic | 1 |
| 48***91 | Pin, Ladderhitch Coupling | 1 |
A3-10-1 Swinging Drawbar, Piton Option, With Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 70 | 2 |
A3-13-1 Top Link Assembly
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-30-1 Kits
| 33***25 | Adapter, Reducing M22 | 1 |
| 33***73 | Adapter, Reducing M16 | 1 |
| 45***38 | Coupling, 'C' Type | 1 |
A3-2-8 Trailer Coupling, Rockinger 260
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***00 | Coupling, Trailer 38.5mm Pin, 'Rockinger 260' | 1 |
A3-16-1 Top Link, Front
| 47***00 | Link, Top | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-2-11 Rear Deck, Support Frame, & Cover, Heavy Duty
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-9-5 Ladder Hitch, Assembly, Rockinger
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***0Z | Bolt, M20 X 100mm | 4 |
A3-13-2 Top Link Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-2-20 Trailer Coupling, Ladder Hitch, 850r, Rockinger
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-2-12 Rear Deck, Light Weight Cover
| 13***7Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
A3-18-1 Stabiliser, Automatic
| 47***00 | Rod, Auto Stabiliser Assembly, Walterscheid; Use New Rod Stabiliser 47***00 San5640, 22/5/95 Gk | 1 |
| 47***00 | Stabiliser, Automatic, Assembly | 1 |
A3-4-1 Hitch Assembly, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-4-2 Guard, Propshaft, Front Pto
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 47***01 | Guard, Front Power Take-Off Propshaft, Front Section | 1 |
| 47***02 | Guard, Front Power Take-Off Propshaft, Rear Section | 1 |
A3-22-1 Lower Links, Cat 3
| 47***05 | Spring | 1 |
| 47***12 | Latch, Claw | 1 |
| 47***13 | Cover, Latch | 1 |
A3-2-9 Rear Deck, Support Frame
| 13***2Z | Bolt | 2 |
| 13***2Z | Bolt, M16x50m | 12 |
| 13***3Z | Nut, M20 | 2 |
A3-18-2 Stabiliser, Automatic
| 47***00 | Stabiliser, Automatic, Assembly | 1 |
| 47***83 | Housing, Recoil | 1 |
| 47***84 | Latch | 1 |
A3-10-5 Swinging Drawbar, Piton Option, Without Ladder Hitch
| 13***0Z | Bolt, M16x100 | 2 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***6Z | Bolt, M20 X 70 | 2 |
A3-17-4 Stabiliser
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
| 47***97 | Pin, Clevis | 1 |
A3-2-5 Drawbar, Assembly
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 2 |
A3-3-1 Claw Hitch Cat.3
| 47***05 | Spring | 1 |
| 47***10 | Hitch, Ball Assembly, Cat 3 | 2 |
| 47***12 | Latch, Claw | 1 |
A3-7-1 Rear Under Run Bar
| 47***12 | Pin, Pivot; German- Use With Ladder Hitch. For Use When Pick Up Hitch Is Not Fitted & Rockinger Ladder Hitch Is Mounted, Pin, Pivot | 1 |
| 47***13 | Pin, Pivot, 25mm X 145mm | 2 |
| 47***07 | Ball, Cat 3-2 | 2 |
A3-14-1 Lift Rod Assembly
| 47***00 | Rod, Assembly, Lift, Cbm | 2 |
| 47***00 | Rod, Assembly, Lift, Cbm; Replaced By 47***00 | 2 |
| 47***00 | Rod, Assembly, Lift, Cbm; Replace Using 47***00 In Pairs Only - When, Available.San5623 17/5/95 Gk/Jv, 28mm Diameter Lower Pin. Fitted By Production From M636435, Can Be Replaced Using 47***00 If Changed As A Pair. | 2 |
A3-17-3 Stabiliser
| 47***85 | Rod, Eye End | 1 |
| 47***86 | Spring | 1 |
| 47***87 | Rod, Connecting Link | 1 |
A3-15-1 Lift Rod Assembly
| 47***00 | Rod, Lift Assembly, Waltersheid | 2 |
A3-8-1 Guard, Propshaft
| 47***01 | Guard, 'Undersheet' | 1 |
| 47***02 | Cord, Shock 12" | 10 |
| 47***03 | Cord, Shock 6" | 4 |
A3-14-3 Lift Rod Assembly
| 47***00 | Rod, Lift Assembly | 2 |
| 47***34 | Rod, Eye End | 1 |
| 47***35 | Guard, Adjuster | 1 |
A3-11-1 Pick-Up Hitch
| 14***9Z | Washer | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-2-21 Rockinger 225g150, Drawbar Coupling, Automatic, 40mm
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***38 | Coupling, Trailer, 'Rockinger 225' | 1 |
A3-9-1 Ladder Hitch, Assembly, Scharmuller
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-2-13 Rear Deck, Lightweight
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 8 |
| 13***3Z | Nut, M16 | 8 |
| 14***1Z | Washer, M16 Plain | 8 |
A3-14-6 Lift Rod Assembly, Heavy Duty
| 47***07 | Nipple, Grease | 3 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-14-2 Lift Rod Assembly, Heavy Duty
| 47***75 | Nipple, Grease | 2 |
| 47***51 | Link, Eye End Swivel | 1 |
| 47***52 | Pin, Retaining | 1 |
A3-1-2 Weight Tray Assembly, Front, No Hitch
| 13***2Z | Bolt, M16x50m | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***1Z | Nut | 2 |
A3-17-1 Stabiliser
| 47***00 | Rod, Stabilizer, Walterscheid | 0 |
| 47***00 | Rod, Stabiliser, Compression | 1 |
| 47***00 | Rod, Stabiliser, Compression | 1 |
A3-14-5 Lift Rod Assembly
| 47***00 | Rod, Lift, Assembly | 2 |
| 47***01 | Rod, Top Connector | 1 |
| 47***02 | Cover | 1 |
A3-1-1 Weight Tray Assembly, Front
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
A3-14-4 Lift Rod Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-21-1 Trailer Coupling, Ladder Hitch, Scharmuller, Italian
| 47***00 | Coupling, Trailer, Cat.D3 | 1 |
| 47***00 | Coupling, Trailer, Cat.D2 | 1 |
| 47***00 | Coupling, Trailer, Cat C | 1 |
A3-14-7 Lift Rod Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***03 | Shaft | 1 |
| 47***04 | Pin, Spring | 1 |
A3-2-19 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-2-1 Claw Hitch Cat.2, Walterscheid
| 47***03 | Bush, Tension Pin | 1 |
| 47***00 | Hitch, Ball Assembly, Cat 2, Hitch, Ball Assembly, Cat 2; Used With 47***01 On Page A3-4-1. Weld On | 1 |
| 47***02 | Latch, Claw | 1 |
A3-22-2 Lower Links, Cat 3
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***08 | Kit-Repair, Cat3 Link | 1 |
A3-20-2 Top Link Assembly, Hook Type
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
| 47***05 | Handle | 1 |
B Bodywork, Cab, Loader End
B1-4-1 Mounting, Front Lights
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***3Z | Nut, Lock, M10 | 4 |
B1-1-5 Chassis & Fitments, Extended Wheel Base, Conversions. 1450mm.
| 13***3Z | Nut, M20 | 16 |
| 13***22 | Capscrew, Socket Head, M20 X 120 | 16 |
| 14***2Z | Washer, M20 | 32 |
B1-1-3 Chassis & Fitments
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 8 |
| 13***1Z | Bolt, M12 X 45 | 16 |
| 13***6Z | Bolt, M16 X 70mm | 6 |
B1-1-7 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 2 |
| 12***04 | Kit-Seal, Sight Gauge | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-7-1 Tank, Fuel
| 47***00 | Tank, Assembly, Diesel, 300 Litres; Standard Fitment For Turbo Engine Machine. Optional Fitment For Naturally Aspirated Engine Machine., Tank, Assembly, Diesel, 300 Litres | 1 |
| 47***01 | Cap, Fuel Filler, Non-Locking | 1 |
| 47***01 | Ring, Locking | 1 |
B1-1-1 Chassis & Fitments
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 8 |
| 13***1Z | Bolt, M12 X 45 | 16 |
| 13***6Z | Bolt, M16 X 70mm | 6 |
B1-2-1 Pannier Unit, Left Hand
| 13***3Z | Screw, M6x16 | 4 |
| 13***8Z | Bolt, M10 X 30 | 7 |
| 13***9Z | Screw, M10x35mm | 2 |
B1-8-1 Bodywork, Rear End Less Hitch, & Ladder
| 13***8Z | Bolt, M12 X 80mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 10 |
| 13***9Z | Bolt, M20 X 90 | 4 |
B1-7-5 Tank, Fuel
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 8 |
| 47***01 | Tank, Fuel, Plastic, 300 Litres; Use 47***00 | 1 |
| 47***00 | Tank, Assembly, Diesel, 300 Litres; Standard Fitment For Turbo Engine Machine. Optional Fitment For Naturally Aspirated Engine Machine., Tank, Assembly, Diesel, 300 Litres | 2 |
B1-5-1 Engine Access Steps
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***3Z | Nut, M12 | 4 |
B1-1-14 Mounting, Chock
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
B1-1-4 Chassis & Fitments, Extended Wheel Base, Conversions. 750mm.
| 13***3Z | Nut, M20 | 12 |
| 13***8Z | Capscrew, Socket Head, M20x80 | 12 |
| 14***2Z | Washer, M20 | 24 |
B1-1-13 Bonnet Release
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***1Z | Nut | 4 |
| 13***1Z | Nut | 6 |
B1-1-8 Bonnet & Fittings
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 20 |
| 13***8Z | Screw, M8x30 | 2 |
B1-6-1 Fenders, Front & Rear
| 13***0Z | Bolt, M10 X 40 | 16 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
| 13***8Z | Bolt, M10 X 30mm | 12 |
B1-9-2 Mounting Bracket, Trailer Socket, Italian
| 13***9Z | Screw, M10x35mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B1-1-6 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***5Z | Capscrew | 4 |
B1-1-10 Bonnet & Fittings
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 20 |
| 13***8Z | Screw, M8x30 | 2 |
B1-3-1 Pannier Unit, Right Hand
| 13***7Z | Bolt, M10x25 | 5 |
| 13***8Z | Bolt, M10 X 30 | 6 |
| 13***4Z | Bolt, M10x60 | 1 |
B1-1-12 Mounting, Chock
| 13***8Z | Bolt, M12 X 30 | 3 |
| 47***01 | Frame, Support | 1 |
| 47***02 | Screw, Clamping | 1 |
B1-9-1 Mounting Bracket, Abs Socket
| 13***9Z | Bolt, M16 X 35mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
B1-4-2 Mounting, Front Lights
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***3Z | Nut, M12 | 6 |
| 14***9Z | Washer | 12 |
B2-2-13 Seat, Air Suspension, With Lock Out
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-2-6 Seat, Passenger
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***02 | Seat, Cover Assembly, Back; Nla,Use Cover 40/20***11 Grey/Brown Fabric, Jv/Gk San5619 17/5/95 Gk. | 1 |
B2-2-1 Radio Console
| 13***5Z | Bolt | 5 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 5 |
B2-9-2 Panel,Instrument, Covers & Brackets.
| 13***1Z | Nut | 6 |
| 47***48 | Bracket, Support R.H. | 1 |
| 47***68 | Bracket, Support L.H. | 1 |
B2-4-2 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***24 | Glass, Door | 2 |
| 82***50 | Glazing, Front Screen | 1 |
B2-1-4 Cab Frame
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
B2-2-8 Seat, Air Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-13-1 Toolbox
| 14***6Z | Washer, M6 | 3 |
| 47***09 | Cover, L.H. Tool Box | 1 |
| 47***10 | Cover, Toolbox Lid | 1 |
B2-4-1 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***50 | Glazing, Front Screen | 1 |
| 82***51 | Glazing, Lower Screen R.H. | 1 |
B2-6-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
B2-1-3 Cab Base
| 13***3Z | Screw, M6x16 | 2 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 14***1Z | Washer | 4 |
B2-11-2 Door, Right Hand
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
B2-10-1 Door, Left Hand, Manual Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-9-1 Panel, Instrument, Covers & Brackets
| 13***1Z | Nut | 2 |
| 47***41 | Panel, Heater Outlet Duct; Use 47***39, San 04436 | 1 |
| 47***45 | Cover, Fuse Box | 1 |
B2-1-16 Mirrors, External
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-12-1 Visor, Sun
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 47***00 | Blind, Sun Visor | 1 |
B2-1-15 Mirrors, External
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-1-2 Cab Frame
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***03 | Panel, Rear R.H., Yellow; Use 47***87 | 1 |
B2-1-1 Cab
| 47***00 | Cab, Assembly | 1 |
| 47***00 | Cab, Assembly | 1 |
| 47***00 | Cab, Glazed | 1 |
B2-3-1 Soundproofing, Cab
| 47***39 | Panel, Roof Lining L.H. | 1 |
| 47***40 | Panel, Roof Lining R.H. | 1 |
| 47***41 | Panel, Roof Lining Rear R.H | 1 |
B2-2-11 Seat Belt
| 47***00 | Kit, Seat Belt, Kit, Seat Belt; Contains All Parts Necessary To Fit. Introduced On Production Builds As An Option From M635637 | 2 |
B2-1-12 Cab Insulation
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 1 |
| 47***10 | Bracket, Harness Mounting | 4 |
B2-8-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-2-9 Seat Belt
| 13***6Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
B2-7-1 Light, Working, Blanking Kit
| 14***03 | Screw, 5/8" No 6, Black | 8 |
| 24***01 | Grommet, Blind | 2 |
| 24***08 | Grommet, Blind | 2 |
B2-5-1 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 7 |
B2-2-7 Seat, Standard, Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-10-2 Door, Left Hand
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
B2-11-1 Door, Right Hand, Manual Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B5-4-2 Decals, North American, Homologation
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
| 81***79 | Label, Warning, General | 1 |
B5-10-2 Lubricants & Filters
| 02***40 | Element, Oil Filter, Cartridge | 1 |
| 02***50 | Element, Fuel Filter, Water Seperator | 1 |
| 02***55 | Element, Fuel Filter, Cartridge | 1 |
B5-2-2 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-2-1 Paint
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 1 |
| 42***05 | Paint, Gloss Yellow, 2.5 Lts | 1 |
B5-9-1 Identification, Serial Plates
B5-10-1 Lubricants & Filters
| 32***02 | Element, Air-Primary | 1 |
| 32***01 | Element, Air-Safety | 1 |
| 32***02 | Kit-Element, Fuel Filter, Short | 2 |
B5-6-2 Decal,50 Year
| 99***20 | Decal, 50 Years, For Cab Machines | 1 |
B5-6-1 Decals, Cab Interior
| 47***35 | Plate, Blanking; For Use When Rear Hitch Is Not Fitted. To Blank Hitch Release Lever Slot In Side Console., Plate, Blanking | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
B5-3-1 Tool Kit, Park Brake Release
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 47***00 | Kit, Parkbrake Release | 1 |
| 47***01 | Spanner | 2 |
B5-5-1 Decals, Cab Interior
| 47***00 | G.A. | 1 |
| 47***00 | G.A. | 1 |
| 47***00 | G.A. | 1 |
B5-1-1 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-4-1 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
C Electrics-Machine, Cab & Engine
C1-9-1 Valve Assembly, Pneumatics
| 47***66 | Valve, Double Solenoid | 4 |
| 47***67 | Manifold, 4 Station | 1 |
| 47***68 | Adapter, Straight Connector | 3 |
C1-2-2 Harness, Machine Electrics, Electronic Draft Control
| 71***00 | Harness, Rear Fender, Edc | 1 |
| 72***38 | Harness, Cab Edc | 1 |
| 72***92 | Harness, Chassis Edc | 1 |
C1-1-1 Harness, Machine Electrics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 47***73 | Harness, Sheild, 30mm Dia | 50 |
C1-2-9 Fog Light
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-8-1 Switches, Electrical
| 13***9Z | Screw, M5 X 35mm | 3 |
| 13***3Z | Nut | 3 |
| 14***04 | Washer, M5 | 4 |
C1-10-1 Light, Number Plate, Italian
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***07 | Spacer | 2 |
C1-3-1 Light, Head
| 26***00 | Headlight, R/H. Dip, 12 Volt, Clear | 1 |
| 26***00 | Headlight, L/H. Dip, 12 Volt, Clear | 1 |
| 70***01 | Lens | 1 |
C1-6-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-5-1 Horn, Single Tone
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***6Z | Washer, M6 | 1 |
C1-1-5 Harness, Machine Electrics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 47***73 | Harness, Sheild, 30mm Dia | 50 |
C1-2-7 Light, Head
| 26***00 | Headlight, R/H. Dip, 12 Volt, Clear | 2 |
| 26***00 | Headlight, R.H. Dip, 12 Volt, Yellow; Use 26***00 Light,Clear.San5287 23/12/94 | 2 |
| 26***00 | Headlight, L/H. Dip, 12 Volt, Clear | 2 |
C1-2-3 Light, Beacon, Hazard Warning
| 12***19 | Plate, Beacon Mounting | 1 |
| 47***00 | G.A. | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-2-8 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-4-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C1-7-1 Mountings & Supports, Harness
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 90 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 20 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
C1-1-10 Harness &, Additional Electrics, Safim Trailer Braking, Italian Option
| 47***50 | Light, Block Assembly, Trailer Park Brake, Light, Block Assembly, Trailer Park Brake; Italian Option. For Use With 'Safim' Trailer Brake Valve | 1 |
| 47***00 | G.A. | 1 |
| 70***00 | Switch, Stop Light/2wd Dump, Switch, Stop Light/2wd Dump; 2wd Dump & Trailer Park Brake Signal - Italy. If Italian 'Safim' Trailer Braking Option Is Fitted, 2 Switches Are Fitted In This Line. | 1 |
C1-2-1 Harness, Machine Electrics, Electronic Draft Control
| 71***00 | Harness, Rear Fender, Edc | 2 |
| 71***00 | Harness, Cab Edc; Use 71***00, San 04722 | 1 |
| 71***00 | Harness, Chassis, Edc; Use 71***00, San 04396 | 1 |
C2-1-1 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
C2-2-1 Engine Heater, Installation
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Screw | 8 |
| 13***3Z | Nut | 7 |
C2-4-1 Alternator Mountings
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-3-4 Alternator, 100amp
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
| 71***04 | Regulator, Assembly | 1 |
C2-3-2 Alternator, 100amp
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***01 | Cover, Assembly | 1 |
| 71***00 | Alternator, 100amp; Optional. Fitted Only With 6 Front And 4 Rear Working Lights., Alternator, 100amp; Optional. Fitted Only With 6 Front And 4 Rear Working Lights Option., Alternator, 100amp, Alternator, 100amp; Optional. Fitted Only With 6 Front And 4 Rear Working Light Option. | 1 |
C2-15-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-1-2 Electrical Equipment
| 17***07 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
C2-3-1 Alternator, 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***00 | Alternator, 85amp | 1 |
C2-5-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-11-1 Ether Cold Start, Installation
| 02***41 | Kit-Cold Start | 1 |
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C2-1-3 Electrical Equipment
| 47***96 | Timer, Module, Pull Coil | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
C2-13-1 Alternator
| 71***00 | Alternator, 12volt - 95amp | 1 |
| 71***01 | Cover, Slip Ring End | 1 |
| 71***02 | Capacitor, Suppression | 1 |
C2-11-2 Heater, Engine Block
| 13***3Z | Nut | 2 |
| 47***89 | Bracket, Plug Mounting | 1 |
| 71***01 | Harness | 1 |
C2-3-3 Alternator, 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
C2-12-1 Stop Solenoid, Installation
| 02***93 | Bracket, Solenoid Mounting | 1 |
| 02***14 | Screw, Flange Head, 8.8 | 2 |
| 02***68 | Screw | 3 |
C2-2-2 Heater, Engine Block
| 13***3Z | Nut | 2 |
| 47***89 | Bracket, Plug Mounting | 1 |
| 71***00 | Kit-Heater, Engine Block | 1 |
C2-10-1 Electrical Equipment
| 47***75 | Switch, Temperature | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
C2-14-1 Alternator Mountings
| 02***60 | Bracket, Alternator Mounting | 1 |
| 02***61 | Spacer | 1 |
| 02***62 | Plate, Alternator Support | 1 |
C2-12-2 Stop Solenoid, Installation
| 02***68 | Adapter, 45d Elbow, Adapter, 45d Elbow; See Frame U7-4-1 Item 5. 90d Elbow Must Be Replaced With 45d When Fitting New Solenoid, To Avert Foul Condition. | 1 |
| 13***3Z | Screw; Replaces 69***21 | 7 |
| 13***3Z | Screw, M6x16 | 4 |
C2-6-1 Engine Stop Solenoid, Installation
| 71***00 | Kit-Solenoid, Engine Stop | 1 |
| 71***01 | Solenoid, Engine Stop | 1 |
| 71***02 | Bracket, Solenoid Mounting | 1 |
C3-16-1 Buzzer & Timer, Selectronic
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Nut | 2 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 1 |
C3-9-1 Air Conditioning, Intake
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 2 |
| 32***00 | Filter, Carbon, Cab Intake | 1 |
C3-15-1 Instrument Cluster
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C3-18-1 Installation, Area/Diff Lock Cut-Out
| 47***04 | Switch, Rocker, Diff Lock Cut-Out | 1 |
| 47***05 | Switch, Rocker, Area Meter Cut-Out | 1 |
| 47***00 | G.A. | 1 |
C3-2-1 Air Conditioning, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
C3-1-13 Installation, Tachograph
| 13***3Z | Nut, M20 | 3 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 14***06 | Washer | 3 |
C3-4-1 Heater, Installation
| 13***1Z | Nut, M5-8 | 2 |
| 13***03 | Nut | 2 |
| 14***6Z | Washer, M6 | 5 |
C3-12-1 Heater Assembly
| 14***6Z | Washer, M6 | 14 |
| 47***05 | Screw | 14 |
| 47***01 | Fan, Motor & Blower Assembly | 1 |
C3-1-6 Switches & Sensor, Rear Hitch Control, External
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 47***62 | Bracket, Position Sensor | 1 |
| 47***98 | Switch, Position Sensor | 1 |
C3-10-1 Wash/Wipe, Front Screen
| 13***1Z | Setscrew, M6 X 12mm Long | 3 |
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C3-14-1 Ashtray & Lighter
| 47***85 | Ashtray | 1 |
| 71***00 | Lighter, Cigar | 1 |
C3-1-14 Control Panel, Without Rear Hitch
| 13***5Z | Bolt | 8 |
| 47***07 | Console, Side Panel | 1 |
| 47***09 | Switch, Plate | 1 |
C3-2-2 Air Conditioning, Installation
| 13***5Z | Bolt | 10 |
| 47***02 | Cover, 'B' Post | 1 |
| 47***01 | Tube, Drain Assembly, Condensate | 1 |
C3-11-1 Washer Kit, Windscreen
| 13***5Z | Bolt | 2 |
| 24***03 | Grommet | 2 |
| 47***03 | Grommet | 2 |
C3-14-2 Ashtray & Lighter
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 47***41 | Ashtray | 1 |
C3-7-1 Battery & Fittings
| 13***5Z | Bolt | 7 |
| 13***1Z | Nut, M8 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-1-4 Control Panel, With Rear Hitch
| 13***5Z | Bolt | 8 |
| 13***3Z | Nut | 3 |
| 47***07 | Console, Side Panel | 1 |
C3-1-11 Light, Auxiliary, Cab Mounted
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 24***05 | Grommet | 2 |
| 47***37 | Bracket, Mounting L.H. | 1 |
C3-6-1 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-5-1 Light, Marker, Cab Mounted
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 20***07 | Tie, Cable - 100mm Long | 20 |
| 24***03 | Grommet | 2 |
C3-2-5 Air Conditioning, Installation, Engine Bay
| 13***2Z | Bolt, M6 X 50 | 6 |
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 7 |
C3-13-1 Fuse Box & Relays
| 47***00 | Plug, Link, 2 Way Junior Timer | 1 |
| 70***01 | Relay, Hazard/Flasher, 4 Connectors, Square | 1 |
| 70***00 | Alarm, Buzzer | 1 |
C3-16-2 Buzzer & Timer, Selectronic
| 47***00 | G.A. | 1 |
| 70***00 | Relay, Buzzer/Timer Unit | 1 |
| 82***18 | Washer, M3 | 2 |
C3-4-2 Heater, Installation
| 13***5Z | Bolt | 2 |
| 13***5Z | Bolt, M12x20 | 1 |
| 13***1Z | Nut, M5-8 | 2 |
C3-8-2 Air Conditioning, Assembly
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 14***32 | Valve, Expansion, R134a | 1 |
| 14***6Z | Washer, M6 | 21 |
C3-1-7 Light, Working
| 70***03 | Spring | 1 |
| 70***00 | Light, Front Working | 0 |
| 70***01 | Gasket | 1 |
C3-1-2 Control Panel, With Rear Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
| 13***5Z | Bolt | 8 |
| 13***3Z | Nut | 3 |
C3-3-1 Light, Head, Right Hand Dip
| 13***5Z | Screw, Set, M8 X 20 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 24***05 | Grommet | 2 |
C3-3-2 Light, Indicator, Side, Auxiliary
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 47***56 | Switch, Rear Wipe | 1 |
| 64***00 | Tube | 0 |
C3-1-5 Switch Panel, Draft Control
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
| 47***03 | Lever, Rotary Control, Small | 1 |
C3-1-15 Control Panel, Without Rear Hitch
| 13***5Z | Bolt | 8 |
| 47***07 | Console, Side Panel | 1 |
| 47***00 | Switch; A=Front Power Take-Off, B=2/4wd, C=Rear Power Take-Off. If Front And Rear Power Take-Off Fitted, Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fited., Switch, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only., Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fitted., Switch; A=Blanked, B=2/4wd, C=Rear Power Take-Off. If Rear Power Take-Off Only, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only | 2 |
C3-17-1 Clock
| 12***90 | Clock, Digital | 1 |
C3-8-1 Air Conditioning, Assembly
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 14***6Z | Washer, M6 | 21 |
| 47***03 | O Ring | 1 |
C3-1-9 Switch, Column
| 70***01 | Column, Switch Cap | 1 |
| 70***01 | Clamp | 1 |
| 70***00 | Switch, Column Indicator | 1 |
C3-7-2 Battery, & Fittings.Plus, Isolator Switch
| 13***5Z | Bolt | 9 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***1Z | Nut, M8 | 6 |
C3-1-10 Light, Working, Optional
| 24***08 | Grommet, Blind | 2 |
| 70***00 | Light, Working | 1 |
| 70***00 | Light, Working | 1 |
C3-1-3 Switch, Draft Control
| 47***00 | Panel, Draft Control, Panel, Draft Control; For Components See Frame C3-1-3. Knobs To Be Fitted After Bolting To Main Panel | 1 |
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
C3-2-6 Air Conditioning, Installation, Engine Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***2Z | Bolt, M6 X 50 | 6 |
| 13***4Z | Bolt, M6 X 60 | 1 |
C3-1-1 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***02 | Grommet | 1 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
C3-1-8 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 47***90 | Light, Mask | 1 |
D Controls-Machine
D1-9-1 Controls, Gearbox, Identification
D1-3-12 Ram, Assembly, Pneumatic Gearchange
| 33***30 | Cover, Intermdiate | 1 |
| 47***85 | Piston | 2 |
| 47***86 | Rod, Piston | 1 |
D1-7-1 Control, Pick Up Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
D1-1-1 Gearshift, 5/6 Speed
| 12***02 | Plate, Compression | 2 |
| 13***5Z | Bolt | 9 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
D1-8-1 Control, Hitch Release
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 2 |
D1-3-1 Gearshift, Air Assisted, Range Change
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
D1-11-1 Control, Valve Flow
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***33 | Knob, Control; Same As 47***17 | 1 |
D1-4-1 Control, Pedal Assembly
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***7Z | Bolt | 1 |
D1-2-1 Gearshift, Manual Range Change
| 13***5Z | Bolt | 12 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 13***03 | Screw, Cap | 2 |
D1-3-2 Valve Assembly, Pneumatics
| 47***66 | Valve, Double Solenoid | 4 |
| 47***67 | Manifold, 4 Station | 1 |
| 47***68 | Adapter, Straight Connector | 3 |
D1-2-3 Control, Lever, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***7Z | Capscrew, Socket Head | 2 |
D1-6-1 Control Linkage, 4 Spool Valve
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 8 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-1-3 Controls, Linkage, Speed Gearbox
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 13***9Z | Capscrew, M8 X 90mm | 1 |
| 47***00 | Connector, Gear Change; Cwe,Then 47***96 San5538 10/4/95 Gk | 1 |
D1-1-7 Clutch, Master Cylinder
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***04 | Washer, Copper | 1 |
| 15***00 | Cylinder, Master | 1 |
D1-1-6 Clutch & Actuation, Circuit
| 47***06 | Hose, Armoured | 1 |
| 47***08 | Nut, Thin M12 X 1.0 Pitch | 2 |
| 47***00 | Pipe, Master Cylinder | 1 |
D1-10-1 Control, 3 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-6-2 Control, 4 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-3-3 Ram, Assembly, Pneumatic Gearchange
| 47***79 | Kit-Seal | 1 |
| 47***81 | Elbow, Fitting | 4 |
| 47***64 | Switch, & Connector Assembly | 1 |
D1-3-11 Gearshift, Air Assisted, Range Change
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
D1-1-5 Clutch, Master Cylinder
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***04 | Washer, Copper | 1 |
| 15***00 | Reservoir, & Cap Assembly | 1 |
D1-5-1 Control Linkage, 2 Spool Valve
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-5-2 Control, 2 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-4-2 Control, Pedal Assembly
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
D2-11-2 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
D2-2-2 Control, Speed Limiter, Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
D2-1-4 Controls, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***1Z | Nut | 2 |
D2-1-2 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Bolt | 1 |
D2-1-3 Control, Throttle
| 02***58 | Nut | 1 |
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
D2-11-3 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
D2-11-1 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
D2-2-1 Control, Speed Limiter, Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 12***02 | Knob, Controls, Yellow | 1 |
E Hydraulics Including Steering
E1-12-2 Circuit, Auxiliary, Free Flow Return, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 23***11 | O Ring, 5/8"Bsp | 2 |
E1-8-11 Circuit, Auxiliary, 4 Spool, Rear
| 22***53 | Circlip | 6 |
| 24***10 | O Ring | 6 |
| 45***01 | Kit-Seal | 1 |
E1-13-1 Circuit, Auxiliary, Front
| 13***9Z | Bolt, M8 X 35mm | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 22***51 | Circlip | 4 |
E1-8-5 Hose & Pipework, 4 Spool, Without Rear Hitch
| 16***06 | Adapter, 39.5mm Lg. M/M | 6 |
| 22***51 | Circlip | 12 |
| 24***07 | O Ring | 3 |
E1-11-2 Circuit, Auxiliary, Free Flow Return, Rear
| 23***11 | O Ring, 5/8"Bsp | 2 |
| 45***01 | Kit-Seal | 1 |
| 45***00 | Coupling, Quick Release, 5/8"Bsp Female | 1 |
E1-13-2 Circuit, Auxiliary, Front
| 13***8Z | Screw, M8x30 | 3 |
| 13***9Z | Bolt, M8 X 35mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-6-1 Circuit, Differential Lock
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 47***33 | Adapter, M12 X 1/4" Bsp M | 1 |
E1-4-2 Hose & Pipework, Steering
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-8-1 Hose & Pipework, 4 Spool, With Rear Hitch
| 22***51 | Circlip | 12 |
| 24***07 | O Ring | 2 |
| 45***01 | Cover, Dust,Black | 1 |
E1-4-5 Hose & Pipework, Steering
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-1-2 Circuit, Neutral
| 14***26 | Washer, Seal | 1 |
| 14***6Z | Washer, Spring | 2 |
| 22***09 | Clip, Jubilee | 8 |
E1-7-11 Circuit, Auxiliary, 2 Spool, Rear
| 24***10 | O Ring | 4 |
| 45***01 | Kit-Seal | 1 |
| 45***00 | Coupling, Qr 1/2"Bsp Female, L=88 | 4 |
E1-10-1 Circuit, Front Hitch
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 2 |
| 13***2Z | Nut, M12 | 2 |
E1-7-5 Hose & Pipework, 2 Spool, Without Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***9Z | Screw, M10x35mm | 3 |
| 13***3Z | Nut, Lock, M10 | 4 |
E1-7-1 Hose & Pipework, 2 Spool, With Rear Hitch
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
| 22***51 | Circlip | 8 |
| 24***07 | O Ring | 1 |
E1-3-2 Circuit, Transmission
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-5-2 Circuit, Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-5-1 Circuit, Rear Hitch
| 16***03 | Adapter | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***07 | Adapter | 1 |
E1-10-2 Circuit, Front Hitch
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 2 |
| 13***2Z | Nut, M12 | 2 |
E1-3-3 Circuit, Cooling, Transmission
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-2-1 Circuit, 2/4wd, Front & Rear Pto
| 13***9Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
E1-12-1 Circuit, Auxiliary, Free Flow Return, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 22***51 | Circlip | 2 |
E1-9-1 Circuit, Flow Divider, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
E1-11-1 Circuit, Auxiliary, Free Flow Return, Rear
| 22***51 | Circlip | 2 |
| 45***01 | Cover, Dust,Black | 1 |
| 45***01 | Kit-Seal | 1 |
E1-2-2 Circuit, 2/4wd, Front & Rear Pto
| 13***9Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
E1-4-1 Hose & Pipework, Steering
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-20-1 Circuit, Gearbox, Balance Pipework
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
E1-1-1 Circuit, Neutral
| 13***8Z | Screw, M8x30 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***26 | Washer, Seal | 1 |
E1-3-1 Circuit Transmission
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E2-3-1 Pump 32l/1000 Revs., Gearbox Low Pressure
| 13***8Z | Capscrew, M12x30 | 2 |
| 20***08 | Coupling, 13/13 Spline | 1 |
| 20***02 | Pump, Gearbox; Use 20/20***00 Or 20/20***00 Or 20/21***00 See, Relevant Machine Parts Catalogue | 1 |
E2-2-1 Pump 25l/1000 Revs., Gearbox Low Pressure, & External Hydraulics
| 13***8Z | Capscrew, M12x30 | 2 |
| 20***08 | Coupling, 13/13 Spline | 1 |
| 20***00 | Pump, Auxiliary | 1 |
E2-1-2 Pump, Steer & Suspension
| 13***7Z | Capscrew, Socket Head | 2 |
| 20***06 | Cap | 1 |
| 20***08 | Cap | 1 |
E2-1-1 Pump, Steer & Suspension
| 13***7Z | Capscrew, Socket Head | 2 |
| 20***06 | Cap | 1 |
| 20***08 | Cap | 1 |
E2-1-3 Pump, Steer & Suspension
| 13***7Z | Capscrew, Socket Head | 2 |
| 20***06 | Cap | 1 |
| 20***08 | Cap | 1 |
E2-10-1 Service Steer Pump, Refit Kit
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E2-1-4 Pump, Steer & Suspension, Service Option
| 20***05 | Pump, Assembly, Steering/Suspension | 1 |
E2-3-2 Pump,Auxiliary,, 77 Litre
| 20***02 | Kit-Screw | 1 |
| 20***03 | Kit-Seal, Pump | 1 |
| 20***00 | Pump, Auxiliary, 32cc; Check Id Plate For: 550/1/35272 | 1 |
E2-2-2 Pump,Auxiliary,, 60 Litre
| 20***00 | Pump, Auxiliary, 25cc; Check Id Plate For : 550/1/35271 | 1 |
| 20***02 | Kit-Screw | 1 |
| 20***03 | Kit-Seal, Pump | 1 |
E2-4-1 Pump 40l/1000 Revs, Aux/Transmission
| 13***8Z | Capscrew, M12x30 | 2 |
| 20***04 | Kit-Bolt, Rear | 1 |
| 20***02 | Kit-Seal, Pump | 1 |
E2-1-5 Pump, Steer & Suspension, Service Option
| 20***06 | Pump, Assembly, Steering/Suspension | 1 |
E2-10-2 Service Steer Pump, Refit Kit
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E3-5-1 Valve, Rear Hitch
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***8Z | Capscrew | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
E3-7-1 Valve, Solenoid
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 12 |
E3-1-1 Valve, Components
| 13***9Z | Screw, M10x35mm | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 24***07 | O Ring | 1 |
E3-2-1 Valve, Section, 3 Position, Single/Double Acting
| 25***16 | O Ring | 1 |
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E3-12-1 Valve Section, Inlet, With Main Relief
| 25***01 | Valve, Section, Inlet, C/W M.R.V | 1 |
| 25***11 | Valve, Main Relief | 1 |
| 25***12 | Plug | 1 |
E3-11-3 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Bolt, M8 X 55 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 24***11 | O Ring | 1 |
E3-4-1 Valve, Main Relief
| 25***19 | Kit-Seal, Relief Valve | 1 |
| 25***03 | Valve, Mrv; For Details See Frame E3-1-4. Set Releif Valve Pressure When Installed. See Service Manual For Procedure., Valve, Mrv, Valve, Mrv; For Details See Index E3. Set Releif Valve Pressure When Installed, See Service Workshop Manual For Proceedure. | 1 |
E3-6-1 Filter, Transmission
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E3-15-1 Valve, Section, Draft Control, Solenoid Operated
| 25***02 | Cap, Rubber | 1 |
| 25***03 | Kit, Solenoid | 2 |
| 25***05 | Valve, Section, Draft Control | 1 |
E3-9-1 Valve, Flow Regulator, Diverter
| 25***02 | Coil, 12v | 1 |
| 25***00 | Valve, Priority, Flow Divider | 1 |
| 25***01 | Valve, Relief, Cartridge | 1 |
E3-11-1 Valve, Assembly, 2 Spool & Adapters
| 13***3Z | Bolt, M8 X 55 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 23***15 | O Ring, 3/4"Bsp | 1 |
E3-14-1 Valve, Section, 3rd & 4th Spool
| 25***04 | Valve, Section, 3rd & 4th Spools | 1 |
| 25***20 | O Ring | 1 |
| 25***22 | Cap, Spool End | 1 |
E3-15-2 Valve, Section, Draft Control, Solenoid Operated
| 25***13 | Spring, Compression | 1 |
| 25***14 | Shim, 0.5mm | 0 |
| 25***15 | Shim, 0.3mm | 0 |
E3-8-1 Filter, Hydraulic, Tank Mounted
| 58***12 | Element, Filter, 10 Micron | 1 |
| 58***02 | O Ring | 1 |
| 58***04 | Seal | 1 |
E3-5-2 Valve, Rear Hitch
| 25***00 | Valve, Rear Hitch | 1 |
| 25***01 | Kit-Solenoid | 1 |
| 25***02 | Kit-Seal | 1 |
E3-13-1 Valve, Section, 1st & 2nd Spool
| 25***02 | Valve, Section, 1st & 2nd Spools | 1 |
| 25***20 | O Ring | 1 |
| 25***22 | Cap, Spool End | 1 |
E3-11-2 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Bolt, M8 X 55 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 23***15 | O Ring, 3/4"Bsp | 1 |
E3-3-1 Valve, Section, 4 Position, With Float
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 1 |
E4-5-3 Ram, Rear Hitch, 80mm Diameter
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
E4-3-7 Ram, Suspension, 'Cushioned', Optional 45mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
| 47***13 | Cover, Protective Tube | 1 |
E4-2-2 Ram Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-3-1 Ram, Suspension, 'Cushioned'
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-3-5 Ram,, Suspension, 'Cushioned' 50mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 1 |
| 47***62 | Ram, Suspension 50mm | 2 |
E4-4-2 Ram, Rear Hitch, 85mm Diameter
| 47***53 | Nipple, Grease | 2 |
| 47***33 | Plug | 1 |
| 47***35 | Ring, Locking | 1 |
E4-4-1 Ram, Rear Hitch, 85mm Diameter
| 22***62 | Circlip, Internal | 1 |
| 22***71 | Circlip | 1 |
| 33***68 | Wire, Retaining Ring, 85mm | 1 |
E4-5-2 Ram, Rear Hitch, 80mm Diameter
| 47***53 | Nipple, Grease | 2 |
| 47***30 | Kit-Seal, 80mm Lift Ram | 1 |
| 47***31 | Cylinder | 1 |
E4-1-3 Ram, Front Hitch
| 47***01 | Kit-Seal, 60mm Cyl X 30mm Rod | 1 |
| 47***02 | Nut, End | 1 |
| 47***03 | Cylinder, Ram | 1 |
E4-2-3 Ram Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-2-1 Ram, Suspension
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-3-6 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-1-2 Ram, Front Hitch
| 47***39 | Kit-Seal | 1 |
| 47***40 | Cylinder | 1 |
| 47***41 | Nut | 1 |
E4-3-2 Ram, Suspension, 'Cushioned', Option
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***13 | Cover, Protective Tube | 1 |
E4-5-1 Ram, Rear Hitch, 80mm Diameter
| 22***62 | Circlip, Internal | 1 |
| 22***71 | Circlip | 1 |
| 47***03 | Bearing, Assembly | 1 |
E4-3-3 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-4-3 Ram, Rear Hitch, 85mm Diameter
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
E4-3-4 Ram, Suspension, 'Cushioned', Optional 45mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***13 | Cover, Protective Tube | 1 |
E4-1-1 Ram, Front Hitch
| 47***00 | Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod; For Parts See Index E4. Plug Un-Used Ports With 81***18 X 2, Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod; 4 Ports On Cylinder. Blank Un-Used Ports With 81***18 X 2, Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod | 2 |
| 47***01 | Kit-Seal, 60mm Cyl X 30mm Rod | 1 |
| 47***02 | Nut, End | 1 |
F Axles, Wheels & Transmissions
F1-12-6 Axle Drive Head, Maxtrac, 12.24 : 1 Ratio
| 44***05 | Nut, Adjusting | 2 |
| 45***00 | Gear, Crown Wheel & Pinion, Ratio 34/15; Replaced By 45***44, See San 10681 | 1 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
F1-13-1 Differential, Components, No Spin
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-5-1 Differential, Components, No-Spin
| 45***00 | Differential, Assembly, No-Spin | 1 |
| 45***00 | Differential, Case Assembly | 1 |
| 45***00 | Differential, No-Spin | 1 |
F1-13-2 Differential, Components, Maxtrac
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-14-2 Hub & Components, Front Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-11-7 Axle Assembly, Front, No-Spin Diff, 16.2 : 1, 65kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-1-3 Axle Assembly, Front, 30/40/55kph
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-2-1 Axle Drive Head
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
F1-14-3 Hub & Components, Front Left Hand, Twin Caliper, High Speed
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-1-1 Axle Assembly, Front
| 13***9Z | Screw, M10x35mm | 10 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***0Z | Bolt, M16 X 200 | 2 |
F1-12-2 Axle Drive Head, Maxtrac, 19.2 : 1 Ratio
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Gear, Crown Wheel & Pinion, Ratio 32/9; Replaced By 45***84, See San 10680 | 1 |
F1-1-5 Axle Assembly, Front, 75kph
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-12-3 Axle Drive Head, No Spin Differential, 16.2 : 1 Ratio
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-3-1 Hub & Components
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***01 | Sealant, Clear Dp2205, 310ml | 0 |
F1-14-1 Hub & Components, Front Left Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-14-4 Hub & Components, Front Right Hand, Twin Caliper, High Speed
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-11-1 Axle Assembly, Front, No-Spin Diff, 19.2 : 1, 30/40/55kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-11-2 Axle Assembly, Front, Max-Trac, 19.2 : 1, 30/40/55kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-11-5 Axle Assembly, Front, No-Spin, 12.24 : 1, 75kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-1-6 Axle Assembly, Front, 65kph
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-13-4 Differential, Components, Maxtrac
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Case Assembly, 40mm Flange | 1 |
F1-13-3 Differential, Components, No Spin
| 45***00 | Differential, Assembly, No-Spin | 1 |
| 45***00 | Differential, Case Assembly | 1 |
| 45***00 | Differential, No-Spin | 1 |
F1-3-4 Hub & Components
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***01 | Sealant, Clear Dp2205, 310ml | 0 |
F1-11-10 Axle Assembly, Front, Max-Trac, 12.24 : 1, 75kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-12-5 Axle Drive Head, No Spin Differential, 12.24 : 1 Ratio
| 44***05 | Nut, Adjusting | 2 |
| 45***00 | Gear, Crown Wheel & Pinion, Ratio 34/15; Replaced By 45***44, See San 10681 | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-12-4 Axle Drive Head, Maxtrac, 16.2 : 1 Ratio
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-12-1 Axle Drive Head, No Spin Differential, 19.2 : 1 Ratio
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-11-4 Axle Assembly, Front, Max-Trac, 16.2 : 1, 65kph
F1-11-8 Axle Assembly, Front, Max-Trac, 16.2 : 1, 65kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-1-2 Axle Assembly, Front, Twin Caliper Brakes
| 13***5Z | Bolt, M12x20 | 2 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 8 |
| 13***09 | Bolt, Micro Encapsulated | 10 |
F1-1-4 Axle Assembly, Front, 65kph
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-11-6 Axle Assembly, Front, Max-Trac, 12.24 : 1, 75kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-3-3 Hub & Components
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***01 | Sealant, Clear Dp2205, 310ml | 0 |
F1-3-5 Hub & Components, Twin Caliper Brakes
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***01 | Sealant, Clear Dp2205, 310ml | 0 |
F1-1-7 Axle Assembly, Front, 72kph
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-11-3 Axle Assembly, Front, No-Spin Diff, 16.2 : 1, 65kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-11-9 Axle Assembly, Front, No-Spin, 12.24 : 1, 75kph
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-4-1 Differential, Components, 'Maxtrac'
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 8 |
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
F1-3-2 Hub & Components, Twin Caliper Brakes
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***01 | Sealant, Clear Dp2205, 310ml | 0 |
F2-1-2 Axle Assembly, Rear, Twin Caliper Brakes
| 13***5Z | Bolt, M20 X 65mm Long | 4 |
| 13***03 | Nut | 4 |
| 13***01 | Nut | 32 |
F2-3-2 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-21-2 Axle Assembly, Rear, 65 Kph, 16.62 : 1, Pd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F2-1-1 Axle Assembly, 3 Pin Planetary Hub, Rear, Narrow Wheel Bearings
| 13***09 | Bolt | 20 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***03 | Nut | 4 |
F2-22-1 Axle Drive Head, 55kph, Pd70
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-5-10 Hub & Components Kit, Upgrade 3 To 4 Pins
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 8 |
| 45***08 | Pad, Thrust | 2 |
F2-2-1 Axle Drive Head
| 13***09 | Bolt | 20 |
| 13***17 | Bolt | 2 |
| 14***1A | Nipple | 1 |
F2-2-10 Axle Drive Head, Service Kit, Rear Diff
| 45***01 | Piston | 1 |
| 45***04 | Sleeve | 1 |
| 80***29 | Washer | 1 |
F2-2-2 Axle Drive Head, Czechia
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-1-4 Axle Assembly, Rear, 40kph, 4 Pin Planetary Hub, Wide Wheel Bearings
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-21-4 Axle Assembly, Rear, 55 Kph, 19.8 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F2-21-3 Axle Assembly, Rear, 80 Kph, 12.49 : 1, Pd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F2-22-2 Axle Drive Head, 65kph, Pd70
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-1-6 Axle Assembly, Rear, 72kph, 4 Pin Planetary Hub, Wide Wheel Bearings
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-24-1 Hub & Components, Rear Left Hand, Pd70
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-21-6 Axle Assembly, Rear, 80 Kph, 12.29 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F2-13-1 Hub & Components
| 10***79 | Plug, C/W O Ring | 2 |
| 10***96 | Nut, Locking | 1 |
| 45***01 | Carrier, Planetary Hub | 1 |
F2-5-2 Hub & Components, Dummy Axle
| 13***7Z | Bolt, Coated | 4 |
| 45***02 | Carrier, Annulus | 2 |
| 45***03 | Dowel, Hollow | 16 |
F2-22-6 Axle Drive Head, 80kph, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-1-7 Axle Assembly, Rear, 65kph, Soft Engage Differential, Czechia
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-11-1 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F2-25-1 Hub & Components, Pd90
| 10***79 | Plug, C/W O Ring | 1 |
| 45***01 | Carrier, Planetary Hub | 1 |
| 45***02 | Housing, Bearing | 1 |
F2-1-3 Axle Assembly, Rear, Dummy, Six Wheeler Build
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 45***04 | Casing, Dummy Axle | 1 |
| 45***00 | Axle, Pd70 Disc Brake. | 1 |
F2-23-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-5-1 Hub & Components, 3 Pin Planet
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F2-22-5 Axle Drive Head, 65kph, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-22-4 Axle Drive Head, 55kph, Pd90
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-10-2 Axle Assembly, Rear, 65kph, Soft Engage Differential, Czechia
| 13***5Z | Bolt, M16x65 | 4 |
| 13***03 | Nut | 4 |
| 13***01 | Nut | 32 |
F2-10-1 Axle Assembly, Rear
| 13***5Z | Bolt, M16x65 | 4 |
| 13***03 | Nut | 4 |
| 13***01 | Nut | 64 |
F2-11-2 Axle Drive Head, Czechia
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-21-1 Axle Assembly, Rear, 55 Kph, 19.8 : 1, Pd70
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F2-5-3 Hub & Components, 4 Pin Planet
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 8 |
| 45***08 | Pad, Thrust | 2 |
F2-4-1 Installation, Power Take Off, Rear
| 45***00 | Yoke, Flange; Use 45***00, San 04898 | 1 |
| 45***00 | Axle, Pd70 Disc Brake, Ratio 19.8:1 | 1 |
| 45***02 | Shaft, Power Take-Off Adapter | 1 |
F2-24-2 Hub & Components, Rear Right Hand,Pd70
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-14-1 Installation, Power Take Off, Rear
| 45***00 | Yoke, Flange; Use 45***00, San 04898 | 1 |
| 45***00 | Axle, Pd70 Disc Brake, Ratio 19.8:1 | 1 |
| 45***02 | Shaft, Power Take-Off Adapter | 1 |
F2-1-5 Axle Assembly, Rear, 65kph, 4 Pin Planetary Hub, Wide Wheel Bearings
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-3-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***02 | Pin, Trunnion; Use 45***03 | 2 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
F2-12-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-22-3 Axle Drive Head, 80kph, Pd70
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***01 | Piston | 1 |
F2-21-5 Axle Assembly, Rear, 65 Kph, 16.62 : 1, Pd90
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
F3-13-1 Propshafts, Axle Drive, Rear, 750mm Extended Wheelbase Build
| 82***47 | Nut, Cleveloc | 8 |
| 82***50 | Stud, Bolt | 8 |
| 82***88 | Bolt, M10x30 | 4 |
F3-2-2 Propshafts, Axle Drive, Front & Rear
| 11***25 | Strap | 6 |
| 13***3Z | Nut | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F3-2-3 Propshafts,, Axle Drive,, For Extended Wheelbases.
| 11***25 | Strap | 6 |
| 13***3Z | Nut | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F3-15-1 Propshafts, Rear Axle, Drive, 1450mm Extended Wheelbase & 6 Wheeler
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-2-1 Propshaft, Transmission
F3-12-1 Propshafts, Axle Drive, Rear
| 82***47 | Nut, Cleveloc | 8 |
| 82***50 | Stud, Bolt | 8 |
| 82***88 | Bolt, M10x30 | 4 |
F3-3-1 Wheels & Tyres, 75 Kph
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W15l X 24 | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-10-2 Drive Shaft Catcher, Front Axle
| 13***8Z | Bolt, M10 X 30mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
F3-10-1 Drive Shaft Catcher, Front Axle
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 47***35 | Bracket, Propshaft Catcher | 1 |
F3-6-1 Wheels & Tyres, 30, 40, 55, & 65 Kph, Rear
| 15***01 | Valve | 1 |
| 41***00 | Wheel, Rim, 12 Hole, Dw15l X 30 | 1 |
| 41***00 | Wheel, Rim, 12 Hole, Dw20a X 26 | 1 |
F3-3-7 Wheels & Tyres, 75 Kph Rear
| 15***01 | Valve | 1 |
| 41***00 | Wheel, Rim, 12 Hole, W16l X 24 | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-1-1 Axle Lock Stops
| 47***00 | Kit, Axle-Lockstops | 1 |
| 47***01 | Plate, Lock Stop Keeper | 1 |
| 47***02 | Stop, Lock, 30mm Long Head, ( Stamped - '68') | 2 |
F3-10-3 Drive Shaft Catcher, Front Axle
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
F3-4-1 Wheels & Tyres, 30, 40, 55, & 65 Kph
| 15***01 | Valve | 1 |
| 41***00 | Wheel, 20.00 X 30.5 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-11-1 Propshafts, Axle Drive, Front
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-16-1 Propshafts, Axle Drive, Rear, Horsch Skid Unit
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-5-1 Wheels & Tyres, 30, 40, 55, & 65 Kph, Front
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
| 41***00 | Rim, Wheel, Dw20a X 26 | 1 |
F3-14-1 Propshafts, Rear Axle, Fixed, 1450mm Extended Wheelbase & 6 Wheeler
| 13***2Z | Bolt, M12 X 50mm | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
F3-3-4 Wheels & Tyres, 75 Kph Front
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
| 42***00 | Tyre, 495 R70 X 24 Xm27, 155 Michelin Chevron; San23122,Cwe Removed San23500.P Gamble & Rob, Salter.16/10***07 | 1 |
F5-3-2 Gearbox, Splitter & Pto, Input & Clutch Release
| 13***7Z | Bolt, Coated | 6 |
| 13***1Z | Nut | 2 |
| 14***08 | Seal, Washer | 2 |
F5-1-4 Gearbox, Splitter & Pto
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F5-12-1 Clutch & Actuation
| 13***06 | Bolt | 8 |
| 13***6Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
F5-7-1 Gearbox, Splitter & Pto, Solenoid Assembly
| 13***2Z | Capscrew | 4 |
| 13***8Z | Capscrew, M5 X 30 | 8 |
| 14***7Z | Washer, Spring | 4 |
F5-9-1 Clutch Assembly, Power Take Off, Front
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 22***60 | Circlip | 1 |
F5-2-2 Gearbox, Splitter & Pto, Clutch Pack Installation, Spur Gears
| 13***7Z | Bolt, M10x25 | 12 |
| 13***5Z | Bolt | 5 |
| 13***9Z | Screw, M10 X 35 | 21 |
F5-2-1 Gearbox, Splitter & Pto, Clutch Pack Installation, Helical Gears
| 13***7Z | Bolt, M10x25 | 12 |
| 13***5Z | Bolt | 5 |
| 13***9Z | Screw, M10 X 35 | 21 |
F5-13-1 Clutch Servo
| 15***08 | Screw, Bleed, 3/8"Unf | 1 |
| 15***26 | Screw Bleed | 1 |
| 47***00 | Clutch, Servo | 1 |
F5-3-1 Gearbox, Splitter & Pto, Input & Clutch Release
| 13***7Z | Bolt, Coated | 6 |
| 22***54 | Circlip | 1 |
| 22***58 | Circlip, Internal | 1 |
F5-6-2 Gearbox, Splitter & Pto, Selector Clutch Packs, Spur Gears
| 44***04 | Retainer, Spring | 2 |
| 44***05 | Baffle, Oil | 2 |
| 44***07 | Plate, Counter | 12 |
F5-5-1 Gearbox, Splitter & Pto, Selector Mechanism
| 13***7Z | Bolt, Coated | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***10 | Screw | 1 |
F5-12-5 Clutch & Actuation
| 02***73 | Dowel | 1 |
| 02***74 | Dowel | 1 |
| 13***06 | Bolt | 8 |
F5-8-1 Clutch Assembly, Power Take Off, Rear
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 22***60 | Circlip | 1 |
F5-4-1 Gearbox, Splitter & Pto, Gear Group, Output & Intermediate
| 13***5Z | Bolt | 5 |
| 22***28 | Circlip | 1 |
| 22***62 | Circlip, Internal | 1 |
F5-1-2 Gearbox, Splitter & Pto
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F5-6-1 Gearbox, Splitter & Pto, Selector Clutch Packs, Helical Gears
| 22***15 | Circlip | 2 |
| 44***04 | Retainer, Spring | 2 |
| 44***05 | Baffle, Oil | 2 |
F5-1-3 Gearbox, Splitter & Pto
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F5-1-1 Gearbox, Splitter & Pto
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F6-7-1 Gearbox, 5/6 Speed, Front Cover Assembly, Y04198 & Y05100
| 45***21 | Washer, Spring, M12 | 4 |
| 45***28 | Washer, Spring | 5 |
| 45***32 | Screw, M12 | 4 |
F6-11-1 Gearbox, 5 Speed, Remote Control Assy
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
F6-1-1 Gearbox, 5/6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F6-5-1 Gearbox, 5/6 Speed, Input Shaft Assembly, Y04198 & Y05100
| 45***49 | Plunger | 3 |
| 45***50 | Roller, 8mm | 3 |
| 45***51 | Spring, Synchro | 3 |
F6-8-1 Gearbox, 5/6 Speed, Selector Controls, Y04198 & Y05100
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F6-9-1 Gearbox, 6 Speed, Remote Control Assy, Y04198 & Y05100
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
F6-6-5 Gearbox, 6 Speed, Counter Shaft Assy, Y05100
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F6-4-1 Gearbox, 5/6 Speed, Mainshaft Assembly, Y04198
| 45***01 | Gear, Output 31t | 1 |
| 45***06 | Kit, Circlip | 2 |
| 45***44 | Gear, 3rd | 1 |
F6-4-5 Gearbox, 6 Speed, Mainshaft Assembly, Y05100
| 45***01 | Gear, Output 31t | 1 |
| 45***06 | Kit, Circlip | 2 |
| 45***45 | Bearing, Needle Roller | 2 |
F6-1-5 Gearbox, 6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F6-2-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F6-1-6 Gearbox, 6 Speed, Installation, Italy/Czechia
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F6-10-1 Gearbox, 5/6 Speed, Rear Housing, Y04198 & Yo5100
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 1 |
F6-3-1 Gearbox, 5/6 Speed, Case Assemblies
| 45***12 | Bush, Selector Shaft | 2 |
| 45***13 | Plug, Cup | 2 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
F6-6-1 Gearbox, 5/6 Speed, Counter Shaft Assy, Y04198
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F7-1-1 Gearbox, Range
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F7-8-2 Gear Change, Air Assisted, Long Levers
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F7-6-5 Shaft, Output Group, 4 Wheel Drive
| 22***63 | Circlip; Replaces 370a0100z | 1 |
| 22***71 | Circlip | 1 |
| 22***23 | Circlip | 1 |
F7-1-2 Gearbox, Range
| 13***07 | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
F7-1-10 Gearbox, Range, Airshift
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F7-6-7 Shaft, Output Group, 4 Wheel Drive
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
| 44***03 | Washer, Thrust; Superseded By 82***82 | 1 |
F7-5-1 Shaft, Output Group, 4 Wheel Drive, 30, 40, 55 & 75 Kph Standard
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F7-7-1 Gear Change, Manual Gear Shift
| 13***5Z | Bolt | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***23 | Pin | 1 |
F7-8-1 Gear Change, Air Assisted, Short Levers
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Bolt, M10 X 16 | 2 |
| 13***1Z | Nut | 4 |
F7-3-2 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F7-2-3 Gearbox Housing
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 2 |
F7-4-2 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F7-1-9 Gearbox, Range, Manual
| 13***10 | Capscrew, M10 X 40 | 1 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F7-8-3 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***18 | Block, Selector | 1 |
F7-2-1 Gearbox Housing
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
F7-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 45***01 | Shaft, Main | 1 |
| 45***02 | Gear, Input 40t | 1 |
F7-1-6 Gearbox, Range
| 13***07 | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
F7-4-1 Shaft Group, Output
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
| 45***07 | Hub, Sleeve | 1 |
F7-2-2 Gearbox Housing
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 2 |
F7-1-5 Gearbox, Range
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F7-6-1 Shaft, Output Group, 4 Wheel Drive, 65 & 75 Kph Heavy Duty
| 22***63 | Circlip; Replaces 370a0100z | 1 |
| 22***71 | Circlip | 1 |
| 22***23 | Circlip | 1 |
F7-4-3 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F8-2-4 Propshaft,, Rear Power Take Off,, Extended Wheelbase Machines.
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***02 | Cap, Dust | 1 |
F8-3-1 Power Take Off, Rear Installation
| 45***00 | Yoke, Flange; Use 45***00, San 04898 | 1 |
| 45***02 | Shaft, Power Take-Off Adapter | 1 |
| 45***03 | Spacer, Collapsible | 1 |
F8-2-2 Propshaft, Rear Power Take Off
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***02 | Cap, Dust | 1 |
F8-4-1 Gearbox Transfer, Front ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F8-2-7 Propshaft, Rear Power Take Off
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F8-1-2 Gearbox Transfer, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F8-2-3 Guard, Power Take Off, Rear
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
F8-1-4 Guard, Power Take Off, Front
| 13***3Z | Screw, M8 X 16 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 47***08 | Guard, Rear Section | 1 |
F8-6-1 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
F8-5-1 Installation, Power Take Off, Front ( Single )
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 3 |
F8-2-5 Guard, Static, Power Take Off, Rear - French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F8-2-6 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F8-1-1 Installation, Power Take Off, Front
| 11***25 | Strap | 2 |
| 13***0Z | Bolt, M10 X 40 | 16 |
| 13***1Z | Bolt, M10 X 45mm | 3 |
F9-4-10 Transmission, Gearbox Assembly, Air Assisted Range Change
| 13***9Z | Bolt, M10 X 35 | 19 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off | 1 |
F9-4-1 Transmission, Gearbox Assembly, Air Assisted Range Change
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F9-7-1 Gearbox, Identification
F9-2-7 Transmission, Gearbox Assembly, Manual Range Shift
| 13***9Z | Bolt, M10 X 35 | 19 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off | 1 |
F9-2-6 Transmission, Gearbox Assembly, Manual Range Shift
| 13***9Z | Bolt, M10 X 35 | 19 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off, Heavy Duty | 1 |
F9-4-2 Transmission, Gearbox Assembly, Air Assisted Range Change
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off | 1 |
F9-4-11 Transmission, Gearbox Assembly, Air Assisted Range Change
| 13***9Z | Bolt, M10 X 35 | 19 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off, Heavy Duty | 1 |
F9-5-1 Circuit, Gearbox, Balance Pipework
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F9-4-5 Transmission, Gearbox Assembly, Air Assisted Range Change
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Range, Air Assisted | 1 |
F9-2-3 Transmission, Gearbox Assembly, Manual Range Shift
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off | 1 |
F9-4-8 Transmission, Gearbox Assembly, Air Assisted Range Change
| 13***9Z | Bolt, M10 X 35 | 19 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off | 1 |
F9-4-6 Transmission, Gearbox Assembly, Air Assisted Range Change
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off, Heavy Duty | 1 |
F9-4-7 Transmission, Gearbox Assembly, Air Assisted Range Change, Italy/Czechia
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off, Heavy Duty | 1 |
F9-2-1 Transmission, Gearbox Assembly, Manual Range Shift
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Range | 1 |
F9-6-1 Dipstick & Filler, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 14***26 | Washer, Seal | 1 |
| 22***04 | Clip, Jubilee | 2 |
F9-2-5 Transmission, Gearbox Assembly, Manual Range Shift
| 13***9Z | Bolt, M10 X 35 | 19 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off | 1 |
F9-2-2 Transmission,, Gearbox Assembly,, Manual Range Shift.
| 13***9Z | Screw, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Range | 1 |
F9-4-9 Transmission, Gearbox Assembly, Air Assisted Range Change
| 13***9Z | Bolt, M10 X 35 | 19 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off, Heavy Duty | 1 |
F9-2-4 Transmission, Gearbox Assembly, Manual Range Shift
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off, Heavy Duty | 1 |
F9-2-8 Transmission, Gearbox Assembly, Manual Range Shift
| 13***9Z | Bolt, M10 X 35 | 19 |
| 13***7Z | Bolt, M12 X 75 | 10 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off, Heavy Duty | 1 |
F9-4-3 Transmission, Gearbox Assembly, Air Assisted Range Change, Italy/Czechia
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Splitter, Single Power Take-Off | 1 |
G Brakes
G1-2-4 Valve Brake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
| 47***00 | G.A. | 1 |
G1-2-7 Valve, Auto-Drain
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***01 | Kit-Repair, Auto Drain Valve | 1 |
| 47***00 | G.A. | 1 |
G1-8-1 Coupling, Trailer Brake, Italy
| 13***9Z | Screw, M10x35mm | 5 |
| 13***3Z | Nut, Lock, M10 | 5 |
| 45***00 | Coupling, Twin | 1 |
G1-3-6 Installation Circuit, Air Trailer Brakes
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Nut | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G1-1-3 Brake, Parking
| 21***14 | Pin, Split/Cotter | 4 |
| 47***05 | Nut | 2 |
| 47***06 | Washer | 2 |
G1-4-1 Circuit, Twin Air Guage, Installation
| 24***02 | Grommet | 1 |
| 64***01 | Tube, Air, 5 Metre Length | 0 |
| 70***00 | Gauge, Twin Air; For Installation Se Frame G1-4-1. Shows Pressure In Reservoir Tanks 1 & 3, Gauge, Twin Air | 1 |
G1-9-1 Valve, Trailer Brake, Italian
| 15***00 | Valve, Trailer Brake | 1 |
| 15***01 | Kit-Repair | 1 |
G1-12-2 Coupling, Trailer Brake, "Duomatic"
| 45***00 | Coupling, Trailer Brake, Duomatic | 1 |
| 45***01 | Kit-Repair, Duomatic Coupling | 1 |
G1-2-9 Valve, Trailer Brake
| 15***00 | Valve, Trailer Brake | 1 |
| 15***01 | Kit-Repair, Supply Dump Valve | 1 |
| 15***02 | Kit-Repair, Trailer Control V/V | 1 |
G1-2-2 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Valve, Circuit Protection; Use 15/91***00, San 04551 (15/90***00 Used Until M636217) | 1 |
| 15***00 | Valve, Drain | 3 |
G1-2-18 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-11-1 Coupling, Trailer Brake
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, Palm With Seal - Red | 1 |
| 45***00 | Coupling, Palm With Seal, Yellow | 1 |
G1-16-1 Brake Caliper, Rear
| 45***01 | Brake, Pad & Pin Kit, Complete Axle; Was 45***05 X 2 + 47***02 X 1.Now Use Kit, 45***01 See San 07537. | 1 |
| 45***02 | Kit-Seal | 1 |
| 45***03 | Nipple, Bleed Set | 1 |
G1-2-16 Circuit,Air Brakes, Twin Calipers, Pd70 Axles
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Bolt | 2 |
| 13***5Z | Bolt, M16x65 | 8 |
G1-6-1 Circuit, Air Brakes, Cab, 3 Position Handbrake Control
| 15***00 | Valve, Handbrake | 1 |
| 15***00 | Valve, Brake | 1 |
| 20***07 | Tie, Cable - 100mm Long | 1 |
G1-3-8 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-2-11 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-2-6 Valve, Unloader
| 15***00 | Valve, Unloader | 1 |
| 15***01 | Kit-Repair, Unloader Valve | 1 |
| 47***00 | G.A. | 1 |
G1-1-2 Brake System, Schematic
| 15***00 | Valve, Brake Threshold | 2 |
| 15***00 | Valve, Inverse Relay | 1 |
| 15***00 | Valve, Handbrake | 1 |
G1-7-2 Pump, Antifreeze, Air Trailer Brakes
| 47***00 | Pump, Antifreeze | 1 |
| 47***01 | Kit-Repair | 1 |
| 47***02 | Reservoir | 1 |
G1-10-1 Valve, Unloader, Italian
| 15***00 | Valve, Unloader, C/W 10 Bar Rv | 1 |
| 15***01 | Kit-Repair | 1 |
G1-2-21 Valve, Brake Threshold
| 15***00 | Valve, Brake Threshold | 1 |
| 99***04 | Kit-Repair, Threshold Valve | 1 |
G1-17-1 Installation Circuit, Single Line, 'Safim' Hydraulic Trailer Braking
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***3Z | Bolt, M8 X 55 | 2 |
G1-11-3 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 99***01 | Kit-Repair, Palm Coupling, Red/Yellow | 1 |
G1-15-3 Brake Caliper,Front, Twin Caliper
| 47***08 | Nipple, Grease | 1 |
| 47***11 | Piston | 2 |
| 47***12 | Capscrew | 4 |
G1-13-2 Installation Circuit, Single Line, Hydraulic Trailer Braking, Without Hitch
| 13***6Z | Bolt, M8 X 70 | 2 |
| 16***07 | Adapter | 1 |
| 24***07 | O Ring | 1 |
G1-1-1 Brake System, Schematic, Uk Only
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Valve, Circuit Protection; Use 15/91***00, San 04551 (15/90***00 Used Until M636217) | 1 |
G1-11-2 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm With Seal - Red | 1 |
| 45***01 | Cap, Dust, Red | 1 |
| 45***02 | Kit-Repair | 1 |
G1-13-1 Installation Circuit, Single Line, Hydraulic Trailer Braking
| 13***6Z | Bolt, M8 X 70 | 2 |
| 16***07 | Adapter | 1 |
| 24***07 | O Ring | 1 |
G1-1-4 Actuator, Air, Park Brake
| 13***2Z | Nut | 1 |
| 47***21 | Piston, Spring Actuator | 1 |
| 47***22 | Capscrew | 8 |
G1-2-17 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 15***01 | Kit-Repair, Inverse Relay Valve | 1 |
G1-2-20 Valve, Brake Threshold
| 13***7Z | Bolt, M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 15***00 | Valve, Brake Threshold | 1 |
G1-12-1 Coupling, Trailer Brake
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, 'C' Type, Female, With Shut Off; Use 45/91***00 Changed @ M636508, San 04954 | 1 |
| 45***00 | Coupling, 'C' Type, Male, With Shut Off; Use 45/91***00 Changed @ M636508, San 04954 | 1 |
G1-2-19 Handbrake Control, 3 Position
| 15***00 | Valve, Handbrake | 1 |
| 15***01 | Cover, Assembly | 1 |
| 15***02 | Kit, Repair | 1 |
G1-2-5 Handbrake Control, 2 Position, Uk Only
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
| 15***01 | Cover, Assembly, Top | 1 |
| 15***02 | Knob | 1 |
G1-2-3 Circuit, Air Brakes, Chassis
| 02***17 | Olive, 16mm | 1 |
| 13***5Z | Bolt | 1 |
| 13***0Z | Bolt, M10 X 100 | 2 |
G1-15-1 Brake Caliper, Front
| 45***01 | Brake, Pad & Pin Kit, Complete Axle; Use 45***05 X 2 + 47***06 X 1, San 04784 | 1 |
| 45***02 | Kit-Seal | 1 |
| 45***04 | Piston, Set | 1 |
G1-16-2 Brake Caliper, Rear
| 47***02 | Kit-Brake Pad, C/W Pins & Springs, One Axle Set | 1 |
| 47***03 | Kit-Seal, Brake Caliper | 1 |
| 47***08 | Nipple, Grease | 1 |
G1-2-10 Valve, Check
| 15***00 | Valve, Non-Return | 1 |
| 15***01 | Kit-Repair, Non-Return Valve | 1 |
| 15***00 | Valve, Non Return | 1 |
G1-1-5 Brake, Parking
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
| 47***34 | Kit-Repair | 1 |
G1-2-14 Circuit, Air Brakes, Pannier, C/W Brake Threshold Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 15***00 | Valve, Brake Threshold | 2 |
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
G1-2-1 Circuit, Air Brakes, Cab, Uk Only
| 13***03 | Bolt | 8 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
G1-14-1 Valve, Brake, Hydraulic Trailer
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Trailer Brake Valve | 1 |
| 25***04 | Valve, Pilot Head Assembly; Use 25/96***00 | 1 |
G1-7-1 Anti-Freeze Pump, Air Brake Circuit
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
G1-2-15 Circuit,Air Brakes, Twin Calipers, Pd90 Axle
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Bolt | 2 |
| 13***5Z | Bolt, M16x65 | 12 |
G1-3-5 Clamps, Brake Circuit
| 13***5Z | Bolt | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
G1-15-2 Brake Caliper, Front
| 47***04 | Kit-Seal, Brake Caliper | 1 |
| 47***06 | Kit-Brake Pad, C/W Pins & Springs, One Axle Set | 1 |
| 47***07 | Pin | 4 |
G1-14-2 Valve, Brake, Hydraulic Trailer
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 2 |
G1-2-8 Actuator, Air/Hydraulic
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 15***00 | Actuator, Air/Hydraulic | 2 |
| 15***01 | Kit-Repair, Air/Hydraulic Actuator | 1 |
G1-2-22 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-3-7 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Single Line | 1 |
| 45***01 | Kit-Repair | 1 |
| 45***02 | Cover, Dust | 1 |
H Steering
H1-4-1 Motor, Steering
| 13***7Z | Bolt, M10x25 | 4 |
| 13***7Z | Bolt | 8 |
| 47***03 | Kit, Bleeder Plug | 1 |
H1-1-1 Steering, Installation
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
H1-1-5 Steering, Installation
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
H1-5-1 Steering Column
| 11***03 | Clip | 1 |
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
H1-4-3 Motor, Steering
| 47***41 | Steering Drop Arm | 1 |
| 47***53 | Kit-Gasket/Seal, Rebuild | 1 |
| 47***54 | Kit, Input Shaft Seal | 1 |
H1-2-1 Steering Shaft, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
H1-3-1 Steering Shaft, Intermediate
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 47***00 | Shaft, Intermediate Steer, Telescopic | 1 |
H1-5-2 Steering Column
| 11***03 | Clip | 1 |
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
H1-1-2 Steering, Installation
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
H1-4-2 Motor, Steering
| 47***41 | Steering Drop Arm | 1 |
| 47***53 | Kit-Gasket/Seal, Rebuild | 1 |
| 47***54 | Kit, Input Shaft Seal | 1 |
H1-3-2 Steering Shaft, Intermediate
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 47***00 | Shaft, Intermediate Steer, Telescopic; Use Shaft 47***00 San5524 5/4/95 Gk | 1 |
S Suspension
S1-1-2 Suspension, Front, Heavy Duty, Twin Caliper Brakes
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***2Z | Bolt | 2 |
| 13***9Z | Bolt, M10x90mm | 4 |
S1-1-3 Suspension, Front, Heavy Duty
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***2Z | Bolt | 4 |
| 13***9Z | Bolt, M10x90mm | 4 |
S1-1-1 Suspension, Front
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***2Z | Bolt | 1 |
| 13***9Z | Bolt, M10x90mm | 4 |
S2-5-1 Valve, Charge
| 25***67 | Kit-Seal | 1 |
| 25***11 | Kit-Seal | 1 |
| 25***00 | Valve, Charge | 1 |
S2-2-1 Suspension, Rear, Linkages
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
S2-1-2 Suspension, Rear, Hydraulics,, Heavy Duty, Twin Caliper Brakes
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***4Z | Bolt, M6 X 60 | 2 |
S2-1-4 Suspension, Rear, Hydraulics, Heavy Duty
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***1Z | Bolt, M8 X 45 | 1 |
S2-1-1 Suspension, Rear, Hydraulics
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***1Z | Bolt, M8 X 45 | 1 |
S2-2-2 Suspension, Rear, Linkages
| 13***2Z | Bolt | 4 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
S2-1-3 Suspension, Rear, Hydraulics
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***4Z | Bolt, M6 X 60 | 2 |
T Engines 1006-6 & 1006-6t
T1-8-1 Engine Mountings, Ya, Build
| 02***83 | Stud | 8 |
| 02***84 | Nut | 8 |
| 02***53 | Nut | 8 |
T1-3-2 Block Assembly, Yb Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-6-1 Timing Case, Camshaf, T & Gears, Ya Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Yd Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 2 |
T1-5-1 Fans, Pulleys, & Fan Belt, Ya Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-1-4 Engine, Complete, Yd Build
| 01***00 | Engine, 160t, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, Phaser 160t, Turbo, C/W 250cc Compressor | 1 |
T1-1-2 Engine, Complete, Yb Build
| 01***00 | Engine, 1006-6thr5, Turbo, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6thr5, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 1006-6thr, Turbo, C/W 150cc Compressor | 1 |
T1-5-2 Fans, Pulleys, & Fan Belt, Yb & Yd Builds
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-1-3 Engine, Complete, Yb Build
| 01***00 | Engine, 1006-6t4, Turbo, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6t4, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 1006-6t4, Turbo, C/W 159cc Compressor | 1 |
T1-1-1 Engine, Complete, Ya Build
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6,Nat/Asp,, C/W 150cc Compressor | 1 |
T1-6-1 Timing Case, Camshaf, T & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-6-6 Timing Case, Camshaf, T & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-8-1 Engine Mountings, Yb, Build
| 02***83 | Stud | 8 |
| 02***84 | Nut | 8 |
| 02***53 | Nut | 8 |
T1-2-1 Engine, Short, Ya Build
| 02***60 | Engine, Short, 1006.6 | 1 |
T1-6-7 Timing Case, Camshaft & Gears, Yd Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-6-3 Timing Case, Auxiliary Drive
| 02***96 | Key | 2 |
| 02***08 | Dowel | 2 |
| 02***52 | Circlip | 1 |
T1-6-5 Timing Case, Auxiliary Drive
| 02***82 | O Ring | 1 |
| 02***61 | Plate, Compressor Mounting | 1 |
| 02***62 | Hub | 1 |
T1-6-6 Timing Case, Camshaf, T & Gears, Ya Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-5-3 Fans, Pulleys, & Fan Belt, Optional, Ya Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-7-1 Flywheel & Housing,, Yb Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***41 | Plug | 1 |
T1-6-2 Timing Case, Auxiliary Drive
| 02***96 | Key | 2 |
| 02***08 | Dowel | 2 |
| 02***52 | Circlip | 1 |
T1-5-4 Fans, Pulleys, & Fan Belts, Optional, Yb & Yd Builds
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-2-3 Engine, Short, Yd Build
| 02***66 | Engine, Short | 1 |
T1-6-4 Timing Case, Camshaft & Gears, Yd Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-7-1 Flywheel & Housing,, Ya Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***41 | Plug | 1 |
T1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-2-2 Engine, Short, Yb Build
| 02***64 | Engine, Short | 1 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ya Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 6 |
T1-3-1 Block Assembly, Ya Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-3-4 Block Assembly, Yd Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T2-3-1 Rocker Cover, Yb Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
T2-4-1 Lifting Plates, Engi, Ne, Ya Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 1 |
T2-3-2 Rocker Cover, Yb Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
T2-1-2 Cylinder Head, Yb Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-3-2 Rocker Cover, Ya Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Yb
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-3-1 Rocker Cover, Ya Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
T2-3-1 Rocker Cover, Yd Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
T2-3-2 Rocker Cover, Yd Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
T2-1-1 Cylinder Head, Ya Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-4-1 Lifting Plates, Engi, Ne, Yd Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 1 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Yd
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-4-1 Lifting Plates, Engi, Ne, Yb Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 1 |
T2-1-4 Cylinder Head, Yd Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Ya
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T3-5-1 Exhaust Brake, Installation
| 02***19 | Gasket | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Bolt, M8 X 55 | 4 |
T3-5-2 Brake, Exhaust
| 47***01 | Brake, Assembly, Exhaust | 1 |
| 47***05 | Slide | 1 |
| 47***06 | Plate, Pressure | 1 |
T3-3-1 Filter, Air, Ya Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-1-2 Manifold, Induction, Yb Build
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
| 02***82 | Manifold, Induction | 1 |
T3-3-3 Filter, Air, Yd Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***2Z | Bolt | 1 |
| 13***1Z | Bolt | 1 |
T3-4-2 Exhaust System, Yb & Yd Builds
| 02***41 | Gasket | 1 |
| 02***19 | Gasket | 1 |
| 02***15 | Stud | 6 |
T3-2-2 Manifold, Exhaust, Yb & Yd Builds
| 02***04 | Gasket | 2 |
| 02***15 | Gasket | 1 |
| 02***49 | Manifold, Exhaust | 1 |
T3-2-1 Manifold, Exhaust, Ya Build
| 02***04 | Gasket | 2 |
| 02***43 | Manifold, Exhaust | 1 |
| 02***15 | Gasket | 1 |
T3-3-2 Filter, Air, Yb Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-1-3 Manifold, Induction, Yd Build
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
| 02***73 | Hose, Induction | 1 |
T3-4-1 Exhaust System, Ya Build
| 02***19 | Gasket | 1 |
| 02***03 | Stud | 3 |
| 02***61 | Nut | 3 |
T3-1-1 Manifold, Induction, Ya Build
| 02***10 | Plug | 1 |
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Ya
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***03 | Plug, Core", D=26mm | 1 |
T4-1-1 Pump, Water, Yb & Yd, Builds
| 02***82 | O Ring | 1 |
| 02***86 | Gasket | 1 |
| 02***87 | O Ring | 1 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Yb
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***03 | Plug, Core", D=26mm | 1 |
T4-4-2 Radiator & Hoses
| 13***3Z | Nut, Lock, M10 | 2 |
| 22***03 | Clip, Jubilee | 2 |
| 22***08 | Clip, Jubilee | 1 |
T4-4-1 Radiator & Hoses
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 22***03 | Clip, Jubilee | 2 |
T4-3-1 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 10 |
| 13***3Z | Nut, Lock, M10 | 2 |
T4-3-3 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 8 |
| 13***3Z | Bolt, M10 X 55 | 2 |
T4-1-1 Pump, Water, Ya Buil, D
| 02***82 | O Ring | 1 |
| 02***86 | Gasket | 1 |
| 02***87 | O Ring | 1 |
T4-3-2 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 8 |
| 13***3Z | Bolt, M10 X 55 | 2 |
T4-5-1 Cooler, Air Charge, & Pipework, Yd Build
| 02***83 | Hose | 3 |
| 02***83 | O Ring | 2 |
| 02***77 | Adapter | 1 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Yd
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***03 | Plug, Core", D=26mm | 1 |
T5-4-2 Filter, Oil, Yb & Yd Builds
| 02***94 | Connector | 2 |
| 02***96 | Gasket | 1 |
| 02***01 | Head, Oil Filter | 1 |
T5-2-1 Pump, Oil, & Relief Valve, Ya Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-1-1 Sump, Oil & Fittings, , Yb & Yd Builds
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***03 | Olive | 1 |
T5-1-1 Sump, Oil & Fittings, , Ya Build
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***03 | Olive | 1 |
T5-4-1 Filter, Oil, Ya Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***10 | Plug | 1 |
| 02***88 | Head, Oil Filter | 1 |
T5-4-3 Filter, Oil, Yb Build
| 02***96 | Gasket | 1 |
| 02***03 | Head, Filter | 1 |
| 02***37 | Bolt | 4 |
T5-3-1 Piston Cooling Jets, Yb & Yd Builds
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
T5-5-1 Cooler, Oil, & Pipework, Ya Build
| 02***08 | Spring | 1 |
| 02***17 | O Ring | 4 |
| 02***22 | Valve, Relief | 1 |
T5-2-4 Pump, Oil, & Relief Valve, Yd Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-2-2 Pump, Oil, & Relief Valve, Yb Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-5-2 Cooler, Oil, & Pipework, Yb & Yd Builds
| 02***08 | Spring | 1 |
| 02***17 | O Ring | 4 |
| 02***22 | Valve, Relief | 1 |
T5-6-1 Pipes, Oil Feed, Yd Build
| 02***01 | Adapter | 1 |
| 02***43 | Clip | 1 |
| 02***65 | Pipe, Oil Feed, Fuel Injection | 1 |
T5-5-3 Cooler, Oil, & Pipework, Yb & Yd Builds
| 02***63 | Housing, Oil Feed | 1 |
| 02***14 | Seal, O Ring | 2 |
| 02***18 | Gasket, Oil Cooler Housing | 1 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Ya Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
T6-1-3 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-8-1 Pump, Fuel Lift, Ya, Build
| 02***72 | Plate, Keep | 2 |
| 02***24 | Gasket | 1 |
| 02***91 | Gasket | 1 |
T6-3-1 Fuel Pipes, Injection Pump, Ya Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 2 |
T6-2-2 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 5 |
T6-2-4 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***05 | Seal | 6 |
| 02***10 | Spacer | 6 |
T6-1-5 Pump, Fuel Injection, Yd Build
| 02***71 | Hub | 1 |
| 02***72 | Gasket | 1 |
| 02***73 | Plate | 1 |
T6-1-2 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 2 |
| 02***01 | Wire | 1 |
| 02***83 | Sleeve | 1 |
T6-2-5 Injectors, Fuel, & Injection Pipes, Yd Build
| 02***05 | Seal | 6 |
| 02***62 | Clamp | 1 |
| 02***83 | Clamp | 1 |
T6-7-1 Filter, Fuel, Yb Bui, Ld
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-3-3 Fuel Pipes, Injection Pump, Yb Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 4 |
| 02***18 | Nut | 2 |
T6-2-3 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 3 |
T6-6-1 Filter, Fuel Sedimen, T, Ya Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-6-1 Filter, Fuel Sedimen, T, Yb Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-7-2 Filter, Fuel, Yd Build
| 02***64 | Bracket, F/Filter Mounting | 1 |
| 02***27 | Screw | 2 |
| 32***00 | Filter, Fuel | 1 |
T6-7-1 Filter, Fuel, Ya Bui, Ld
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-4-2 Fuel Pipes, Tank To Filter, Yd Build
| 02***28 | Nut | 6 |
| 02***64 | Olive | 6 |
| 02***85 | Clip | 3 |
T6-8-1 Pump, Fuel Lift, Yb, Build
| 02***72 | Plate, Keep | 2 |
| 02***24 | Gasket | 1 |
| 02***91 | Gasket | 1 |
T6-3-5 Fuel Pipes, Injection Pump, Yd Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***48 | Elbow | 1 |
T6-3-4 Fuel Pipes, Injection Pump, Yb Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
T6-8-2 Pump, Fuel Lift, Yd Build
| 02***23 | Gasket | 1 |
| 02***29 | Adapter, Lift Pump | 1 |
| 02***34 | Gasket | 1 |
T6-1-1 Pump, Fuel Injection, Ya Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Ya Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 4 |
T6-5-2 Fuel Heater, & Fuel Feed Pipe, Yb Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
T6-4-1 Fuel Pipes, Tank To Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-3-2 Fuel Pipes, Injection Pump, Yb Build
| 02***88 | Plate | 4 |
| 02***48 | Elbow | 1 |
| 02***28 | Nut | 2 |
T7-3-2 Compressor, Air, 229cc
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***02 | Key, Woodruff | 1 |
T7-4-2 Compressor Pipework, 229cc
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-2-5 Turbo, Heatshield, Yb Build
| 02***78 | Spacer | 2 |
| 02***05 | Shield, Heat | 1 |
| 02***16 | Nut | 2 |
T7-4-1 Compressor Pipework,, Ya Build
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-2-1 Turbo, Pipework, Yb Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***80 | Gasket | 1 |
T7-1-2 Turbocharger, Yb Build
| 02***58 | Nut, Lock | 1 |
| 02***60 | Ring, Piston | 1 |
| 02***65 | Seal | 1 |
T7-2-2 Turbo, Pipework, Yb Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
T7-1-1 Turbocharger, Yb Build
| 02***12 | Kit-Repair, Turbocharger | 1 |
| 02***58 | Nut, Lock | 1 |
| 02***60 | Ring, Piston | 1 |
T7-4-3 Compressor Pipework,, Ya Build
| 02***57 | Union | 2 |
| 02***98 | Spacer | 1 |
| 02***37 | Connector | 3 |
T7-5-1 Compressor, & Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 1 |
| 13***1Z | Bolt, M10 X 45mm | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
T7-3-3 Compressor, Air, 159cc
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***01 | Bearing, Main | 2 |
T7-5-2 Compressor, & Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
T7-6-2 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
T7-3-6 Compressor, Air, 250cc
| 02***37 | Connector | 2 |
| 02***73 | Bracket, Compressor Support | 1 |
| 02***86 | Spacer | 1 |
T7-3-5 Compressor, Air, 150cc
| 02***73 | Bracket, Compressor Support | 1 |
| 02***74 | Spacer | 1 |
| 02***04 | Screw | 1 |
T7-4-3 Compressor Pipework,, Yb Build
| 02***57 | Union | 2 |
| 02***98 | Spacer | 1 |
| 02***37 | Connector | 3 |
T7-3-1 Compressor, Air, 159cc
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***00 | Compressor | 1 |
T7-1-3 Turbocharger, Yd Build
| 02***68 | Clip | 2 |
| 02***72 | Ring | 1 |
| 02***73 | Rod, Actuator | 1 |
T7-6-1 Compressor 12.Volt, Air Conditioning
| 26***05 | Kit-Seal, & Felt Ring Assembly | 1 |
| 26***06 | Ring, Snap | 1 |
| 47***00 | Compressor, Air Conditioning; Must Be Used With 2 Off 47***49 | 1 |
T7-4-1 Compressor Pipework,, Yb Build
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-3-4 Compressor, Air, 229cc
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***02 | Key, Woodruff | 1 |
T8-1-1 Gasket Sets, Yb Buil, D
| 02***83 | Kit-Gasket, Top | 1 |
| 02***84 | Kit-Gasket, Bottom | 1 |
| 02***11 | Kit-Gasket, Bottom | 1 |
T8-1-1 Gasket Sets, Ya Buil, D
| 02***83 | Kit-Gasket, Top | 1 |
| 02***84 | Kit-Gasket, Bottom | 1 |
| 02***11 | Kit-Gasket, Bottom | 1 |
U Engine 6bta5.9-C185
U1-6-3 Timing Case, Camshaft & Gears
| 02***43 | Seal | 1 |
| 02***49 | Gasket, Gear Housing | 1 |
| 02***52 | Kit-Seal, Front Oil | 1 |
U1-3-1 Block Assembly
| 02***01 | Block, Cylinder, Service | 1 |
| 02***02 | Bush, Camshaft | 1 |
| 02***03 | Bush, Camshaft | 0 |
U1-4-2 Crankshaft, Bearings, Pistons & Con-Rods
| 02***37 | Sleeve, Wear | 1 |
| 02***38 | Sleeve, Wear | 1 |
| 02***39 | Dowel, Pin | 1 |
U1-7-1 Flywheel & Housing
| 02***65 | Flywheel, Assembly | 1 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***67 | O Ring | 1 |
U1-1-1 Engine, Complete
| 01***00 | Engine, Complete, 6bta Turbocharged | 1 |
| 01***0R | Engine, Complete, 6bta-Turbo, Reconditioned | 1 |
U1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***37 | Sleeve, Wear | 1 |
| 02***38 | Sleeve, Wear | 1 |
| 02***39 | Dowel, Pin | 1 |
U1-2-1 Engine, Short
| 02***00 | Engine, Short, 6bta; Use Long Engine 02***5r | 1 |
| 02***0R | Engine, Short, 6bta, Reconditioned | 1 |
U1-5-1 Fans, Pulleys, & Fan Belt
| 02***31 | Housing, Assembly, Fan Drive | 2 |
| 02***32 | Bearing | 1 |
| 02***34 | Retainer, Fan Hub | 1 |
U1-6-4 Timing Case, Auxiliary Drive
| 02***75 | O Ring | 1 |
| 02***78 | Hub | 1 |
| 02***79 | Kit-Hub & Gear, Auxiliary Drive | 1 |
U1-2-2 Engine, Short
| 02***50 | Engine, Short | 1 |
| 02***0R | Engine, Short, Reconditioned | 1 |
U1-6-1 Timing Case, Camshaft & Gears
| 02***43 | Seal | 1 |
| 02***48 | Housing, Gear | 1 |
| 02***49 | Gasket, Gear Housing | 1 |
U1-6-2 Timing Case, Auxiliary Drive
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
| 02***75 | O Ring | 1 |
| 02***76 | Bracket, Compressor Support | 1 |
U1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
U1-1-2 Engine, Complete
| 01***00 | Engine, Complete, 6bta Turbocharged; Use Short Engine 02/91***50 Or 02***0r Or, Long Engine 02***5r | 1 |
U2-3-2 Rocker Cover
| 02***53 | Bush | 6 |
| 02***55 | Cover, Rocker | 6 |
| 02***56 | Gasket, Rocker Cover | 6 |
U2-3-1 Rocker Cover
| 02***78 | O Ring | 6 |
| 02***79 | Gasket, Rocker Cover | 6 |
| 02***80 | Cover, Rocker | 6 |
U2-1-1 Cylinder Head
| 02***15 | Plug, Pipe, 1/2"Npt | 3 |
| 02***16 | Plug, Pipe | 2 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
U2-4-1 Lifting Plates, Engine
| 02***92 | Bracket, Lifting | 1 |
| 02***93 | Bracket, Lifting | 1 |
| 02***26 | Screw | 2 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***76 | Lever, Rocker, Inlet | 1 |
| 02***77 | Lever, Rocker, Exhaust | 1 |
| 02***81 | Lever, Assembly, Rocker | 6 |
U3-2-1 Manifold, Exhaust
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***74 | Gasket, Exhaust Manifold | 6 |
| 02***75 | Manifold, Exhaust | 1 |
U3-2-2 Manifold, Exhaust
| 02***71 | Gasket, Turbo To Manifold | 1 |
| 02***12 | Manifold, Exhaust | 1 |
| 02***52 | Gasket | 6 |
U3-1-2 Manifold, Induction
| 02***78 | Hose, Induction | 1 |
| 02***14 | Manifold, Air Transfer | 1 |
| 02***15 | Gasket | 1 |
U3-4-1 Exhaust System
| 02***72 | Elbow, Turbo Exhaust Outlet | 1 |
| 02***73 | Clamp, D=81.8 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
U3-5-1 Heater, Air Intake
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***83 | Gasket, Cooler To Manifold | 1 |
| 02***00 | Heater, Engine | 1 |
U3-1-1 Manifold, Induction
| 02***76 | Manifold, Air Transfer | 1 |
| 02***77 | Gasket, Air Trans/Manifold | 1 |
| 02***78 | Hose, Induction | 1 |
U3-3-1 Filter, Air
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***3Z | Bolt, M10 X 16 | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
U4-3-3 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 8 |
| 13***3Z | Bolt, M10 X 55 | 2 |
U4-4-3 Radiator & Hoses
| 13***3Z | Nut, Lock, M10 | 2 |
| 22***03 | Clip, Jubilee | 4 |
| 22***08 | Clip, Jubilee | 2 |
U4-3-2 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 8 |
| 13***3Z | Bolt, M10 X 55 | 2 |
U4-4-2 Radiator & Hoses
| 13***3Z | Nut, Lock, M10 | 2 |
| 22***03 | Clip, Jubilee | 4 |
| 22***08 | Clip, Jubilee | 2 |
U4-2-1 Thermostat & Housing
| 02***15 | Plug, Pipe, 1/2"Npt | 2 |
| 02***94 | Housing, Thermostat | 1 |
| 02***95 | Thermostat | 1 |
U4-5-1 Cooler, Air Charge
| 02***16 | Plug, Pipe | 1 |
| 02***80 | Cooler, Air Charge | 1 |
| 02***81 | Tap, Drain | 1 |
U4-4-1 Radiator & Hoses
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 22***03 | Clip, Jubilee | 4 |
| 22***08 | Clip, Jubilee | 4 |
U4-5-2 Cooler, Air Charge
| 02***16 | Plug, Pipe | 1 |
| 02***81 | Tap, Drain | 1 |
| 02***82 | Decal, Caution | 1 |
U4-1-1 Pump, Water
| 02***90 | Pump, Water, Kit | 1 |
| 02***91 | Seal, Rectangular Ring | 1 |
| 02***13 | Screw | 2 |
U4-3-1 Radiator, Fittings & Mountings
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 10 |
| 13***3Z | Nut, Lock, M10 | 2 |
U5-4-1 Filter, Oil & Cooler
| 02***28 | Head, Filter | 1 |
| 02***29 | Adapter, Filter Connector | 1 |
| 02***31 | Valve, Oil Pressure Relief | 1 |
U5-6-2 Pipes, Oil Feed
| 02***73 | Adapter, Elbow | 2 |
| 02***74 | Hose, Oil Feed | 1 |
| 02***45 | Hose, Lubrication Oil Feed | 1 |
U5-6-1 Pipes, Oil Feed
| 02***34 | Adapter | 1 |
| 02***35 | Pipe, Oil Feed, Fuel Injection Pump | 1 |
| 02***36 | Bolt, Banjo | 1 |
U5-2-1 Pump, Oil
| 02***30 | Pump, Oil | 1 |
| 02***32 | Screw | 4 |
U5-2-2 Pump, Oil
| 02***08 | Pump, Oil | 1 |
| 02***32 | Screw | 4 |
U5-1-1 Sump, Oil, & Fittings
| 02***20 | Sump, Oil | 1 |
| 02***22 | Washer, Seal | 1 |
| 02***23 | Gasket, Oil Sump | 1 |
U6-2-1 Injectors, Fuel, & Injection Pipes
| 02***91 | Seal | 7 |
| 02***92 | Seal | 1 |
| 02***38 | Bolt, Banjo | 6 |
U6-3-1 Fuel Pipes, Injection Pump
| 02***58 | Washer, Seal | 2 |
| 02***96 | Bolt, Banjo | 1 |
| 02***97 | Washer, Seal | 2 |
U6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
U6-2-2 Injectors, Fuel, & Injection Pipes
| 02***91 | Seal | 7 |
| 02***92 | Seal | 1 |
| 02***38 | Bolt, Banjo | 6 |
U6-1-2 Pump, Fuel Injection, Service Parts
| 02***99 | Valve, Overflow | 1 |
| 02***66 | Nut | 1 |
| 02***67 | Washer | 1 |
U6-7-1 Filter, Fuel
| 02***50 | Element, Fuel Filter, Water Seperator | 1 |
| 02***51 | Head, Fuel Filter | 1 |
| 02***52 | O Ring, Small | 1 |
U6-8-1 Pump, Fuel Lift
| 02***93 | Spacer, Lift Pump Mounting | 1 |
| 02***94 | Gasket, Fuel Lift Pump | 2 |
| 02***07 | Bolt, M8x1.25x25 | 2 |
U6-4-2 Fuel Pipes, Fuel Tank To Filter
| 02***28 | Nut | 2 |
| 02***64 | Olive | 4 |
| 02***57 | Adapter | 2 |
U6-8-2 Pump, Fuel Lift
| 17***00 | Pump, Fuel Lift | 1 |
U6-3-2 Fuel Pipes, Injection Pump
| 02***58 | Washer, Seal | 4 |
| 02***97 | Washer, Seal | 3 |
| 02***61 | Bolt, Banjo | 2 |
U6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***64 | Olive | 2 |
| 02***32 | Clip, 'P' | 1 |
| 02***57 | Banjo, Connector | 1 |
U6-1-3 Pump, Fuel Injection
| 02***26 | Bracket, Mounting | 1 |
| 02***27 | Bracket, Support | 1 |
| 02***44 | Gear, Injection Pump | 1 |
U6-1-1 Pump, Fuel Injection
| 02***40 | Bracket, Mounting | 1 |
| 02***41 | Bracket, Support | 1 |
| 02***96 | Bracket, Inj/Pump Support | 1 |
U7-1-1 Turbocharger
| 02***64 | Adapter, Male/Female | 1 |
| 02***65 | O Ring | 1 |
| 02***00 | Turbocharger | 1 |
U7-5-3 Compressor, & Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
U7-4-1 Compressor Pipework
| 02***82 | Hose | 2 |
| 02***83 | Clip, Jubilee | 9 |
| 02***84 | Adapter, Elbow, 3/8"Nptf | 3 |
U7-3-1 Compressor
| 02***75 | O Ring | 1 |
| 15***00 | Compressor, 250 | 1 |
| 15***01 | Kit-Cylinder Head | 1 |
U7-2-1 Turbo, Pipework
| 02***47 | Adapter | 2 |
| 02***63 | Hose, Turbo Oil Feed | 1 |
| 02***65 | O Ring | 2 |
U7-5-1 Compressor, & Installation, Air Conditioning
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***7Z | Bolt | 2 |
U7-2-2 Turbo Pipework
| 02***39 | Gasket | 1 |
| 02***46 | O Ring | 2 |
| 02***63 | Hose, Turbo Oil Feed | 1 |
U7-5-2 Compressor, & Installation, Air Conditioning
| 13***9Z | Screw, M10x35mm | 1 |
| 13***3Z | Bolt, M10 X 130 | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
U7-1-2 Turbocharger
| 02***07 | Seal | 1 |
| 02***12 | Bearing | 2 |
| 02***13 | Ring, Retaining | 4 |
U7-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
U8-1-1 Gasket Set, Top Overhaul
| 02***28 | Kit-Gasket, Top Overhaul | 1 |
U8-2-1 Gasket Sets, Bottom Overhaul
| 02***29 | Kit-Gasket, Bottom Overhaul | 1 |
FASTRAC 155T serial number reference
The machine identification plate is riveted inside the cab on most cab-equipped machines, typically on the right-hand cab pillar or dash console. A duplicate serial is stamped into the chassis frame. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 00636001 -> 00639999 | Applies to JCB FASTRAC 155T (and base FASTRAC 155) for air conditioning and heater component fitment. Production period documented as 1993 to 1998. |
Frequently asked questions
What engine does the JCB Fastrac 155 use?
The JCB Fastrac 155 uses a Perkins 1000-6 T4 6.0L (365.2 cu in) six-cylinder turbocharged diesel engine producing 168 hp (125.3 kW) and 444.0 lb-ft (602.1 Nm) of torque.
What is the operating weight of the JCB Fastrac 155?
The operating weight is approximately 6520 kg (14374 lbs) for the standard configuration with the OEM part reference tires, front PTO, and front hitch. Weight varies by configuration and tire size.
What model replaced the JCB Fastrac 155?
The Fastrac 155 was part of the first generation Fastrac line (1993-1997). It was succeeded by the Fastrac 2115 series and later models in the Fastrac lineup, which featured updated engines and transmissions.
What FASTRAC 155T owners discuss
What engine powers the JCB Fastrac 155, and what are its key specifications?
The JCB Fastrac 155 is powered by a Perkins 1000-6 T4 engine. This is a 6.0 L (365.2 cu·in) six-cylinder turbocharged diesel engine with a bore of 100.0 mm (3.94 in) and a stroke of 127.0 mm (5 in). It produces 168 hp (125.3 kW) at 2,400 rpm and 444.0 lb-ft (602.1 Nm) of torque at 1,400 rpm.
How does the transmission operate, and what are common user complaints regarding it?
The transmission is a synchromesh unit with 36 forward and 12 reverse gears, achieved through a 6-speed gearbox, a 3-speed range box, and a 2-speed electro-hydraulic powershift. Users report that changing gears can be difficult and that the gearbox is not ideal for heavy grain cart work. Some owners have noted issues with the synchromesh gears.
What are the typical undercarriage and drivetrain wear patterns for this machine?
The Fastrac 155 uses a rigid frame with full suspension: coil springs and shock absorbers on the front axle, and hydraulic cylinders and accumulators on the rear axle. Common wear points include Spicer drive train universal joints, which can fail and damage lower casings if not greased. The PUH linkage can seize if a demount sprayer is used continuously. The outboard pneumatic dry disc brakes are noted for reliability on road work but require pad replacement.
What electrical or sensor issues are frequently reported by owners?
Early Fastrac models (1990–2000) had a reputation for electrical fires, exacerbated by wiring harnesses using very few wire colors, making troubleshooting difficult. Later models, particularly the 3000 series and up, experienced frequent failures of electric hydraulic spool valves, which could cost over £1,500 each to replace. Many owners converted these to manual levers to avoid the issue.
How does the steering and visibility compare to conventional tractors?
The Fastrac 155 features front-wheel steering with a limited steering lock, resulting in a large turning circle that requires three-point turns on headlands. Visibility of the drawbar is limited. The cab is standard with air conditioning, but early models may have non-functional AC switches. The machine is considered a 'one-driver' tractor where the operator must adapt to the view and steering limitations.
What is the recommended hydraulic system configuration for this model?
The hydraulic system capacity varies by configuration, listed as 60.0 L (15.9 US gal) or 76.8 L (20.3 US gal). The system pressure is 3,045 psi (210 bar) with a pump flow of 15.85 gpm (60 lpm). Earlier models had weaker hydraulic performance, which was a concern for large sprayer applications.
What should be checked when buying a used JCB Fastrac 155?
Check the condition of the drive train universal joints and Spicer joints for play or damage. Inspect the electrical wiring harness for signs of previous fire damage or poor repairs due to the limited wire color coding. Test all electric hydraulic spool valves for failure, as they are prone to stopping work. Verify the functionality of the air conditioning and the PUH linkage for seizure. Ensure the clutch, starter, and brake pads have been replaced if hours are high.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 155T. Related factory variants of the same model family:
FASTRAC-155TFASTRAC 155T
Need a specific FASTRAC 155T part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.