JCBagriculturalfastrac
Jcb FASTRAC 130t-65
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 130t-65 is a high-speed agricultural tractor manufactured from 1992 to 1994. It belongs to the first generation of the Fastrac line, which began production in 1991. The machine features a Perkins 6L six-cylinder diesel engine. Operating weight ranges from approximately 14,300 to 14,400 lb (6,486 to 6,532 kg) depending on configuration. The 130t-65 succeeded the Fastrac 125 and 145 models and was followed by the Fastrac 135 and 155 series. Configurations offered include selectable four-wheel drive, hydrostatic or mechanical steering options, and a centrally mounted cab.
Across the Fastrac generations, JCB transitioned from Perkins engines to Cummins and later AGCO Power engines, while updating transmissions from synchromesh to powershift and CVT variants. The 130t-65 represents the early era of high-speed road-hauling tractors with full suspension chassis. It remains relevant in the used market due to its robust Perkins engine and simple mechanical systems, which are easier to service than modern emissions-compliant models. Parts availability is supported by the shared component base with the Contractor 130t and early Fastrac 125/145 models.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 130t-65 specifications
Engine
| Model | Perkins 1000 |
| Cylinders | 6 |
| Displacement | 5,985 cc (365.2 ci) |
| Power | 130 hp (97 kW) |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 14,374 lb (6,520 kg) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 226.8 in (5.76 m) |
| Transport Width | 93 in (2.36 m) |
| Transport Height | 114.6 in (2.91 m) |
| Wheelbase | 118.5 in (3.00 m) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speed | 40 mph (65 km/h) |
| Lift Capacity (Rear) | 15,435 lb (7,001 kg) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 74 gal (280.1 L) |
| Hydraulic System | 15.85 gal (60.0 L) |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb FASTRAC 130t-65 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the FASTRAC 130t-65 beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic system, and axle housings to establish a baseline. Inspect the hydraulic return filter magnet for metallic debris before disposal. Monitor coolant silicate levels to prevent separation sludge in the expansion bottle. Check engine oil condition against the 250-hour change interval to ensure the EcoMAX or Dieselmax engine oil remains effective. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specifications. Track fluid levels daily to catch leaks early.
Corrective & Common Repairs
Address turbocharger shaft play and charge cooler boot condition during the 1000-hour service. Replace primary and secondary fuel filters to protect common-rail injectors from contamination. Inspect drive belts and alternator tension regularly. Check battery electrolyte on non-sealed units. Verify brake disc wear and immersed brake condition at 2000 hours. Test injector spray patterns via diagnostic tool to maintain combustion efficiency. Replace hydraulic oil and clean the tank to prevent component wear.
Overhaul & Rebuild Points
The 2000-hour service requires a full hydraulic oil change and tank cleaning. Inspect the chassis, side frames, boom, and arm for structural cracks or unauthorized welding. Check slew ring bolts torque on excavator variants if applicable. Measure undercarriage wear on tracked models against JCB limits. Inspect front and rear axle hubs for seal leaks. Replace transmission oil and filter to maintain gear shifting performance. Verify steering linkage grease points for smooth operation.
Seasonal & Environment Servicing
Perform a 360-degree leak walk on level ground with the engine cold. Check tire pressure and cut damage for road transport safety. Inspect hoses and cylinders for chafing or pinhole seepage. Verify cab HVAC pressure and evaporator condition for operator comfort. Check ROPS/FOPS integrity and seat belt function. Grease all pivot points on the front axle and steering linkage. Ensure fire extinguisher and backup alarm are functional. Drain fuel water separator if operating in humid conditions.
FASTRAC 130t-65 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/909700 | Filter, Air, Paper | Air intake service | Check fitment → |
| 32/906900 | Filter, Air | Air intake service | Check fitment → |
| 32/208300 | Filter, Air | Air intake service | Check fitment → |
| 02/100073 | Element, Oil Filter, Canister Type - Long | Lubrication service | Check fitment → |
| 02/101188 | Head, Oil Filter | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 130t-65 attachments & work tools
Three-Point Hitch
Category III hitch configuration with a lift capacity of 15,435 lb (7,000 kg). The hitch is designed for heavy-duty field work and is integrated into the rear deck structure.
Power Take-Off (PTO)
Standard PTO operation is managed via the iCON control system. The tractor supports ISOBUS compatibility for integrated implement control and data exchange.
Hydraulic System
Hydraulic flow and pressure specifications vary by configuration and series. The system supports multiple auxiliary valves for operating complex attachments requiring high flow rates.
Cab and Operator Environment
The cab is centrally mounted to provide a balanced center of gravity. It features full suspension to enhance operator comfort and stability during high-speed road transport and field operations.
Suspension and Steering
The machine utilizes a full front and rear suspension chassis unique to the Fastrac platform. It offers 4-wheel steer capabilities with multiple modes to enhance maneuverability in tight spaces.
Braking System
All-round disc brakes provide consistent stopping power. The system includes dual-line steering and twin-caliper brakes for enhanced safety and control at high operating speeds.
Fluid Specifications
JCB recommends specific multipurpose oils suitable for naturally aspirated or turbocharged engines, transmissions, and hydraulics. Engine coolant must be changed at recommended intervals to prevent silicate separation.
All FASTRAC 130t-65 assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 130t-65. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-2-25 Swinging Drawbar, Piton Option, Without Ladder Hitch
| 13***8Z | Bolt, M20 X 80mm | 4 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
A3-1-4 Weight Tray Assembly, Front, No Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Counterweight, 40kg | 16 |
A3-2-13 Trailer Coupling, Ladder Hitch, 248rd, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 3 |
| 47***15 | Nipple, Grease - Drive In | 2 |
A3-2-4 Hitch Assembly, Rear, Lift
| 13***4Z | Bolt, M20 X 60mm | 1 |
| 13***8Z | Bolt, M20 X 80mm | 6 |
| 13***0Z | Bolt, M20 X 100mm | 4 |
A3-2-16 Trailer Coupling, Ladder Hitch, Scharmuller
| 47***00 | Coupling, Ladder Hitch, Non-Automatic | 1 |
| 48***91 | Pin, Ladderhitch Coupling | 1 |
A3-2-17 Trailer Coupling, Ladder Hitch, Low & High Speed, Scharmuller
| 47***00 | Coupling, Ladder Hitch, Pin = 30mm O/D; Tractor Weight 9500 Kg. Operating Speeds Up To & Including 40 Kph, Coupling, Ladder Hitch, Pin = 30mm O/D; Not For Use In Italy. For Tractor Operating Speeds Of 40km/H & Less. | 1 |
| 47***00 | Coupling, Ladder Hitch, Pin = 38mm O/D; Not For Use In Italy. For Tractor Operating Speeds In Excess Of 40 Km/H, Coupling, Ladder Hitch, Pin = 38mm O/D; For Central Trailer Axle Weight 13000 Kg. For Operating Speeds Above 40 Kph | 1 |
A3-1-3 Claw Hitch Cat.2
| 47***03 | Bush, Tension Pin | 1 |
| 47***00 | Hitch, Ball Assembly, Cat 2, Hitch, Ball Assembly, Cat 2; Used With 47***01 On Page A3-4-1. Weld On | 1 |
| 47***02 | Latch, Claw | 1 |
A3-2-11 Rear Deck, Support Frame, & Cover, Heavy Duty
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-1-5 Hitch Assembly, Din 3
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 4 |
A3-1-7 Top Link Extension, Uk Front Hitch
| 47***02 | Bracket, Top Link Extension | 1 |
| 47***13 | Pin, Pivot, 25mm X 145mm | 2 |
| 82***66 | Pin, Lynch | 2 |
A3-5-5 Front Din 3 Plate, & Tow Point
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***4Z | Bolt, M16x60 | 4 |
A3-2-10 Ladder Hitch, Assembly, Rockinger
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-4-2 Guard, Propshaft, Front Pto
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 47***01 | Guard, Front Power Take-Off Propshaft, Front Section | 1 |
| 47***02 | Guard, Front Power Take-Off Propshaft, Rear Section | 1 |
A3-3-5 Lift Rod Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***03 | Shaft | 1 |
| 47***04 | Pin, Spring | 1 |
A3-3-4 Top Link Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***00 | Link, Top Cat 3 | 1 |
| 47***01 | Rod, Eye End Cat 3 | 1 |
A3-2-14 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-2-12 Rear Deck, "Light" Cover
| 13***7Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
A3-3-2 Lift Rod Assembly
| 47***00 | Rod, Lift, Assembly | 2 |
| 47***01 | Rod, Top Connector | 1 |
| 47***02 | Cover | 1 |
A3-10-1 Kits
| 47***0K | Kit, Weights Only, (16 Wts) | 1 |
| 47***0K | Kit, Weights Only, (15 Wts) | 1 |
| 47***0K | Kit, 16 Weights &, Front Hitch Carrier | 1 |
A3-2-5 Drawbar Assembly
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 2 |
A3-2-9 Rear Deck, Support Frame
| 13***2Z | Bolt | 2 |
| 13***2Z | Bolt, M16x50m | 12 |
| 13***3Z | Nut, M20 | 2 |
A3-1-1 Hitch Assembly, Front
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***0Z | Bolt, M20 X 100mm | 4 |
A3-7-1 Rear Under Run Bar
| 47***12 | Pin, Pivot; German- Use With Ladder Hitch. For Use When Pick Up Hitch Is Not Fitted & Rockinger Ladder Hitch Is Mounted, Pin, Pivot | 1 |
| 47***13 | Pin, Pivot, 25mm X 145mm | 2 |
| 47***07 | Ball, Cat 3-2 | 2 |
A3-2-18 Trailer Coupling, Ladder Hitch, Scharmuller, Italian
| 47***00 | Coupling, Trailer, Cat.D3 | 1 |
| 47***00 | Coupling, Trailer, Cat.D2 | 1 |
| 47***00 | Coupling, Trailer, Cat C | 1 |
A3-2-1 Pick-Up Hitch
| 14***9Z | Washer | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-2-6 Claw Hitch Cat.3
| 47***05 | Spring | 1 |
| 47***10 | Hitch, Ball Assembly, Cat 3 | 2 |
| 47***12 | Latch, Claw | 1 |
A3-2-8 Trailer Coupling
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***00 | Coupling, Trailer 38.5mm Pin, 'Rockinger 260' | 1 |
A3-5-1 Hitch Assembly, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-1-2 Weight Tray Assembly, Front
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***00 | Link, Top | 1 |
A3-6-1 Weight Tray Assembly, Front, No Hitch
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***1Z | Nut | 2 |
| 13***3Z | Nut, M20 | 4 |
A3-3-3 Top Link Assembly
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
| 47***00 | Link, Top, Cat 2 | 1 |
| 47***01 | Rod, Eye End Cat 2 | 1 |
A3-2-2 Drawbar Assembly
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 2 |
A3-2-7 Pto Casting Assembly, Rear, With Rear Hitch
| 47***00 | Unit, Rear Power Take-Off Casting, Assembly | 1 |
A3-3-1 Stabiliser
| 47***00 | Rod, Stabiliser Assembly, Cat 2-3 Narrow | 2 |
| 47***01 | Rod, Adjusting Link | 1 |
| 47***02 | Tube, Connecting, 430mm Long | 1 |
A3-1-6 Hitch Assembly, Din 5
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 4 |
A3-2-15 Ladder Hitch, Assembly, Scharmuller
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-2-20 Swinging Drawbar, Piton Option, With Ladder Hitch
| 13***8Z | Bolt, M20 X 80mm | 4 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
A3-2-3 Hitch Assembly, Rear
| 13***9Z | Bolt, M10 X 35 | 6 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***3Z | Nut, M20 | 10 |
A3-4-1 Guard, Propshaft
| 47***01 | Guard, 'Undersheet' | 1 |
| 47***02 | Cord, Shock 12" | 10 |
| 47***03 | Cord, Shock 6" | 4 |
B Bodywork, Cab, Loader End
B1-1-10 Mounting, Front Lights
| 13***5Z | Bolt, M5 X 20mm Long | 16 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut | 12 |
B1-5-1 Engine Access Steps
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***3Z | Nut, M12 | 4 |
B1-1-13 Bonnet Release
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***1Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
B1-1-1 Chassis & Fitments
| 13***2Z | Bolt | 2 |
| 13***1Z | Bolt, M12 X 45 | 24 |
| 13***6Z | Bolt, M12 X 70mm | 8 |
B1-1-4 Tank, Fuel
| 47***03 | Cap, Filler | 1 |
| 47***01 | Tank, Fuel, Plastic, 300 Litres; Use 47***00 | 1 |
| 47***00 | Cap, Filler | 1 |
B1-1-8 Bonnet & Fittings
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 20 |
| 13***8Z | Screw, M8x30 | 2 |
B1-1-9 Bonnet Release
| 12***00 | Latch, Claw | 2 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***8Z | Bolt, M10 X 30 | 1 |
B1-4-1 Mounting, Front Lights
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M12 X 30 | 6 |
| 13***3Z | Nut, Lock, M10 | 4 |
B1-1-2 Pannier Unit, Left Hand
| 13***7Z | Bolt, M10x25 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 16 |
| 13***3Z | Nut, Lock, M10 | 10 |
B1-1-11 Bodywork, Rear End Less Hitch
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***8Z | Bolt, M12 X 80mm | 4 |
| 13***4Z | Bolt, M20 X 60mm | 8 |
B1-2-1 Pannier Unit, Left Hand
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Screw, M10x35mm | 2 |
B1-1-12 Mounting, Chock
| 13***8Z | Bolt, M12 X 30 | 3 |
| 47***01 | Frame, Support | 1 |
| 47***02 | Screw, Clamping | 1 |
B1-1-5 Fenders, Front & Rear
| 13***5Z | Bolt | 4 |
| 13***2Z | Bolt, M16x50m | 4 |
| 13***4Z | Bolt, M16x60 | 4 |
B1-1-6 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 13***5Z | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-1-3 Pannier Unit, Right Hand
| 13***7Z | Bolt, M10x25 | 12 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
B1-1-7 Mounting, Front Lights
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***9Z | Bolt, M16 X 35mm | 2 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
B1-3-1 Pannier Unit, Right Hand
| 13***7Z | Bolt, M10x25 | 8 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***4Z | Bolt, M10x60 | 1 |
B1-1-14 Fenders, Front & Rear
| 13***2Z | Bolt, M16x50m | 4 |
| 13***4Z | Bolt, M16x60 | 4 |
| 13***3Z | Nut, Lock, M10 | 28 |
B2-2-8 Seat, Suspension, Air
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-2-6 Seat, Passenger
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***00 | Seat, Passenger | 1 |
B2-1-13 Door, Left Hand, Manual Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-1-10 Door, Window Regulator, Right Hand
| 13***03 | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***05 | Washer, 'P' | 1 |
B2-1-7 Door, Left Hand, Electric Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-2-1 Radio Console
| 13***5Z | Bolt | 5 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 14***6Z | Washer, M6 | 5 |
B2-2-9 Seat Belt, Optional
| 13***6Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
B2-1-6 Cab, Roof Hatch
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
B2-1-14 Door, Right Hand, Manual Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-2-7 Seat, Standard, Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-1-3 Cab Base
| 13***5Z | Bolt | 18 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 18 |
B2-2-10 Soundproofing, Cab
| 47***20 | Panel, Liner, Roof Hatch | 1 |
| 47***39 | Panel, Roof Lining L.H. | 1 |
| 47***40 | Panel, Roof Lining R.H. | 1 |
B2-1-8 Door, Right Hand, Electric Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B2-1-4 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***50 | Glazing, Front Screen | 1 |
| 82***51 | Glazing, Lower Screen R.H. | 1 |
B2-3-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-2-5 Visor, Sun
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 47***00 | Blind, Sun Visor | 1 |
B2-2-4 Toolbox
| 13***5Z | Bolt | 3 |
| 14***6Z | Washer, M6 | 3 |
| 47***09 | Cover, L.H. Tool Box | 1 |
B2-1-2 Cab Frame
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***01 | Panel, Front R.H., Yellow | 1 |
B2-2-2 Panel, Instrument, Covers & Brackets
| 13***1Z | Nut | 2 |
| 47***30 | Strip, Foam | 0 |
| 47***41 | Panel, Heater Outlet Duct; Use 47***39, San 04436 | 1 |
B2-1-1 Cab
| 47***01 | Cab, Assembly; Options = B & F. Cab C/W Controls & Instruments, External Trim & Hatch, & Air Conditioning. | 1 |
| 47***02 | Cab, Assembly | 1 |
| 47***03 | Cab, Assembly | 1 |
B2-1-11 Light, Working, Blanking Kit
| 14***03 | Screw, 5/8" No 6, Black | 8 |
| 24***01 | Grommet, Blind | 2 |
| 24***08 | Grommet, Blind | 2 |
B2-1-5 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 8 |
B2-2-11 Seat Belt
| 47***00 | Kit, Seat Belt, Kit, Seat Belt; Contains All Parts Necessary To Fit. Introduced On Production Builds As An Option From M635637 | 2 |
B2-1-12 Cab Insulation
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 1 |
| 47***10 | Bracket, Harness Mounting | 4 |
B2-1-9 Door, Window Regulator, Left Hand
| 13***03 | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***05 | Washer, 'P' | 1 |
B2-1-15 Mirrors, External
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-2-3 Soundproofing, Cab
| 13***2Z | Screw, M6 X 50 | 1 |
| 14***6Z | Washer, M6 | 1 |
| 47***14 | Panel, Roof Liner R.H. | 1 |
B5-1-6 Mounting, 40 Kph Sign
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
B5-1-5 Decals, Cab Interior
| 47***35 | Plate, Blanking; For Use When Rear Hitch Is Not Fitted. To Blank Hitch Release Lever Slot In Side Console., Plate, Blanking | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
B5-1-4 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-1-2 Decals, Cab Interior
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-3-1 Tool Kit, Park Brake Release
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 47***00 | Kit, Parkbrake Release | 1 |
| 47***01 | Spanner | 2 |
B5-2-1 Paint
| 42***04 | Paint, Red, 1 Litre | 1 |
| 42***06 | Paint, Red, 5 Litres | 1 |
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
B5-1-1 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-1-3 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-5-1 Identification, Serial Plates
B5-4-1 Lubrication
| 40***01 | Oil, Jcb T/C-25 Litre, Type C3 Sae 10w | 1 |
| 40***02 | Oil, Jcb T/C-5 Litre, Type C3 Sae 10w | 1 |
| 40***03 | Oil, Jcb T/C - 200 Litres, Sae 10w | 1 |
C Electrics-Machine, Cab & Engine
C1-1-2 Switches, Electrical
| 04***72 | Switch, Switch; Differential Lock Switch. Use 70***00 + Bridging Harness 71***00 | 1 |
| 13***9Z | Screw, M5 X 35mm | 3 |
| 13***9Z | Screw, M10x35mm | 2 |
C1-4-1 Light, Number Plate, Italian
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***07 | Spacer | 2 |
C1-2-7 Light, Head
| 26***00 | Headlight, R/H. Dip, 12 Volt, Clear | 2 |
| 26***00 | Headlight, R.H. Dip, 12 Volt, Yellow; Use 26***00 Light,Clear.San5287 23/12/94 | 2 |
| 26***00 | Headlight, L/H. Dip, 12 Volt, Clear | 2 |
C1-2-2 Light, Indicator, Front
| 13***3Z | Nut | 4 |
| 70***00 | Light, Indicator | 2 |
| 70***01 | Lens | 1 |
C1-2-1 Light, Head
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***3Z | Nut | 8 |
| 70***00 | Light, Head, White, Left Hand Dip; San25865.Had Been Made Nsp By Persons Unknown, Reinstated By P Gamble 14/5/2008. | 1 |
C1-1-5 Harness, Machine Electrics
| 70***00 | Switch, Vacuum Sensor | 1 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
| 71***00 | Harness, Connector | 1 |
C1-1-3 Harness, Machine Electrics, Electronic Draft Control
| 71***00 | Harness, Cab, Electronic, Draft Control | 1 |
| 71***00 | Harness, Chassis, Electronic, Draft Control | 1 |
| 71***00 | Harness, Fender, Electronic, Draft Control | 2 |
C1-2-5 Horn, Single Tone
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***6Z | Washer, M6 | 1 |
C1-1-6 Harness, Machine Electrics, Electronic Draft Control
| 71***00 | Harness, Cab, Electronic, Draft Control | 1 |
| 71***00 | Harness, Chassis, Electronic, Draft Control | 1 |
| 71***00 | Harness, Rear Fender, Edc | 1 |
C1-3-2 Air Conditioning, Installation, Engine Bay
| 13***2Z | Bolt, M6 X 50 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C1-2-6 Light, Marker, Cab Mounted
| 20***07 | Tie, Cable - 100mm Long | 20 |
| 47***01 | Plate, Backing | 2 |
| 70***00 | Light, End Outline Marker | 2 |
C1-1-20 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-1-4 Mountings & Supports, Harness
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 20 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
C1-2-3 Light, Beacon, Hazard Warning
| 12***19 | Plate, Beacon Mounting | 1 |
| 47***31 | Plate, Beacon Mounting; Bond To Cab Roof. See Service/Workshop Manual For Adhesives. | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-2-8 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-2-4 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***00 | Light, Cluster, R.H. | 1 |
| 70***01 | Lens, Rear Combination | 1 |
C1-3-1 Air Conditioning, Installation, Engine Bay
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 24***13 | Grommet | 1 |
C1-1-1 Harness, Machine Electrics
| 71***00 | Relay, Black, Relay, Black; 2 Starter Relays In Panel Harness. Located By Foot Pedal R.H. Mounting Bracket | 2 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
| 71***00 | Harness, Esos | 1 |
C2-4-2 Alternator Mountings, , 1006-6t
| 02***92 | Washer | 1 |
| 02***24 | Lever, Alternator Adjusting | 1 |
| 02***94 | Bracket, Mounting | 1 |
C2-4-2 Alternator Mountings, , 145t/160t
| 02***92 | Washer | 1 |
| 02***24 | Lever, Alternator Adjusting | 1 |
| 02***94 | Bracket, Mounting | 1 |
C2-5-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-3-1 Alternator
| 02***43 | Pulley, Alternator | 1 |
| 71***06 | Kit-Bearing, Slip Ring End | 1 |
| 71***07 | Ring, Slip | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C3-1-5 Washer Kit, Windscreen
| 13***5Z | Bolt | 2 |
| 24***03 | Grommet | 2 |
| 47***03 | Grommet | 2 |
C3-2-5 Air Conditioning, Assembly
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***1Z | Nut, M5-8 | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
C3-1-16 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***54 | Panel, Dash/Instrument; For Use With Speedo. Use Panel 47***64 With 1 X 81***78 + 1 X 81***76 + 4 X 82***11 | 1 |
C3-1-8 Battery & Fittings
| 13***5Z | Bolt | 7 |
| 13***1Z | Nut, M8 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-2-6 Air Conditioning, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Bolt | 5 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
C3-2-3 Heater, Installation
| 13***5Z | Bolt | 5 |
| 13***1Z | Nut, M5-8 | 2 |
| 13***03 | Nut | 2 |
C3-4-1 Air Conditioning, Intake
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 2 |
| 32***00 | Filter, Carbon, Cab Intake | 1 |
C3-3-1 Light, Head, Right Hand Dip
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 24***05 | Grommet | 2 |
C3-2-9 Heater Assembly
| 14***6Z | Washer, M6 | 14 |
| 47***05 | Screw | 14 |
| 47***00 | Heater, Assembly; Use 47***00, San 03904 | 1 |
C3-1-15 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***49 | Panel, Dash/Instrument | 1 |
C3-1-12 Fuse Box & Relays
| 13***01 | Nut, M5 | 4 |
| 13***10 | Capscrew | 4 |
| 47***43 | Bracket, Fuse Box | 1 |
C3-1-6 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-1-10 Light, Working, Optional
| 70***00 | Light, Working | 1 |
| 70***00 | Light, Working | 1 |
| 72***61 | Bulb, 12v-55w H3 | 1 |
C3-1-9 Switch, Column
| 13***05 | Screw | 2 |
| 70***00 | Switch, Column | 1 |
| 70***01 | Column, Switch Cap | 1 |
C3-2-7 Heater, Installation
| 13***5Z | Bolt | 5 |
| 13***1Z | Nut, M5-8 | 2 |
| 13***03 | Nut | 2 |
C3-2-2 Air Conditioning, Intake
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 2 |
| 32***00 | Filter, Air | 1 |
C3-1-14 Control Panel, Without Rear Hitch
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 47***07 | Console, Side Panel | 1 |
| 47***09 | Switch, Plate | 1 |
C3-1-2 Control Panel, With Rear Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 13***3Z | Nut | 3 |
C3-2-1 Air Conditioning, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut | 1 |
C3-1-11 Instrument Cluster
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C3-1-4 Wash/Wipe, Front Screen
| 13***1Z | Setscrew, M6 X 12mm Long | 3 |
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C3-2-8 Air Conditioning, Assembly
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 14***6Z | Washer, M6 | 21 |
| 47***03 | O Ring | 1 |
C3-1-18 Instrument Panel
| 12***68 | Bracket | 2 |
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
C3-1-7 Light, Working
| 70***03 | Spring | 1 |
| 70***00 | Light, Front Working | 0 |
| 70***01 | Gasket | 1 |
C3-1-17 Fuse Box & Relays
| 13***01 | Nut, M5 | 1 |
| 13***10 | Capscrew | 2 |
| 47***43 | Bracket, Fuse Box | 1 |
C3-1-13 Installation, Tachograph
| 13***3Z | Nut, M20 | 3 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 14***06 | Washer | 3 |
C3-1-1 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***42 | Panel, Instrument; Use 47***49 X 1 + 47***00 X 3 | 1 |
C3-1-3 Switch, Draft Control
| 47***00 | Panel, Draft Control, Panel, Draft Control; For Components See Frame C3-1-3. Knobs To Be Fitted After Bolting To Main Panel | 1 |
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
C3-2-4 Heater Assembly
| 14***5Z | Washer, M5; Replaces 69***59 | 6 |
| 47***00 | Heater, Assembly, 12 Volt | 1 |
| 47***01 | Motor, & Blower Assembly | 1 |
D Controls-Machine, Engine & Steering
D1-2-2 Control Linkage, 4 Spool Valve
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 8 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-1-3 Controls, Linkage, Speed Gearbox
| 47***00 | Connector, Gear Change; Cwe,Then 47***96 San5538 10/4/95 Gk | 1 |
| 47***00 | Ball, Joint 20mm Dia | 1 |
| 47***00 | Link, Connecting; Cwe,Then 47***95 Link.San5538 10/4/95 Gk | 1 |
D1-1-1 Gear Change
| 12***04 | Knob | 2 |
| 13***5Z | Bolt | 8 |
| 13***2Z | Nut | 2 |
D1-2-4 Control, Pick-Up Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
D1-1-5 Clutch, Master Cylinder
| 14***04 | Washer, Copper | 1 |
| 15***00 | Reservoir, & Cap Assembly | 1 |
| 15***01 | Reservoir, Cap | 1 |
D1-1-4 Control, Pedal Assembly
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 1 |
| 13***1Z | Nut, M8 | 2 |
D1-1-2 Controls, Linkage, Range Gearbox
| 47***01 | Boss, Pivot | 1 |
| 47***00 | Link, Connecting | 1 |
| 47***00 | Connector, Gear Change; Cwe,Then 47***96 San5538 10/4/95 Gk | 1 |
D1-2-5 Control, Hitch Release
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 2 |
D1-2-1 Control Linkage, 2 Spool Valve
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-1-6 Clutch & Actuation, Circuit
| 47***06 | Hose, Armoured | 1 |
| 47***08 | Nut, Thin M12 X 1.0 Pitch | 2 |
| 47***00 | Pipe, Master Cylinder | 1 |
D1-1-7 Controls,Linkage Kit, ,Retrofit Gearbox,, Range
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***9Z | Capscrew, M8 X 90mm | 1 |
D1-2-3 Control, Lever, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***7Z | Capscrew, Socket Head | 2 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 12***02 | Knob, Controls, Yellow | 1 |
D2-1-2 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***1Z | Nut | 2 |
E Hydraulics Including Steering
E1-1-14 Circuit, Front Bumper
| 13***9Z | Screw, M10x35mm | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
E1-1-13 Circuit, Auxiliary, Free Flow Return, Without Rear Hitch
| 22***51 | Circlip | 2 |
| 24***06 | O Ring | 2 |
| 45***00 | Coupling, Quick Release | 1 |
E1-1-7 Circuit, Auxiliary, Free Flow Return, With Rear Hitch
| 22***51 | Circlip | 2 |
| 24***06 | O Ring | 2 |
| 45***00 | Coupling, Quick Release | 1 |
E1-2-1 Circuit, Transmission, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 24***05 | O Ring | 1 |
| 24***06 | O Ring | 3 |
E1-1-4 Circuit, Rear Hitch
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 3 |
E1-1-1 Circuit, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 22***08 | Clip, Jubilee | 2 |
| 22***09 | Clip, Jubilee | 2 |
E1-1-11 Circuit, Steering
| 13***5Z | Bolt, M12x20 | 2 |
| 13***8Z | Bolt, M10 X 30mm | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
E1-2-3 Circuit, Transmission, Rear Power Take Off
| 13***8Z | Bolt, M8 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***9Z | Capscrew, M8 X 90mm | 2 |
E1-1-5 Circuit, Steering
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-1-16 Hose & Pipework, 2 Spool, Without Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***9Z | Screw, M10x35mm | 3 |
| 13***3Z | Nut, Lock, M10 | 4 |
E1-2-6 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***06 | O Ring | 4 |
E1-1-20 Circuit, Rear Hitch
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 3 |
E1-1-6 Circuit, Suspension
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 24***05 | O Ring | 1 |
| 24***06 | O Ring | 2 |
E1-1-18 Circuit, Auxiliary, Front
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 2 |
| 22***51 | Circlip | 4 |
E1-1-3 Hose & Pipework, 4 Spool, With Rear Hitch
| 22***51 | Circlip | 12 |
| 24***07 | O Ring | 2 |
| 24***05 | O Ring | 3 |
E1-1-2 Hose & Pipework, 2 Spool, With Rear Hitch
| 22***51 | Circlip | 8 |
| 24***07 | O Ring | 1 |
| 24***06 | O Ring | 2 |
E1-3-1 Circuit, Flow Divider, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-1-12 Circuit, Rear Hitch
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
E1-1-15 Hose & Pipework, 4 Spool, Without Rear Hitch
| 22***51 | Circlip | 12 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 1 |
E1-2-7 Circuit, Transmission, Neutral, Front Section
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 24***06 | O Ring | 8 |
| 30***00 | Cooler, Combined Hydraulic, Transmission | 1 |
E1-2-5 Circuit, Gearbox, Balance Pipework
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
E1-1-17 Circuit, Auxiliary, Free Flow Return, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 22***51 | Circlip | 2 |
E1-1-21 Circuit, Steering
| 13***5Z | Bolt, M12x20 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-1-9 Circuit, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 17***03 | Cap, Female | 2 |
| 22***08 | Clip, Jubilee | 2 |
E1-1-19 Circuit, Front Hitch
| 13***7Z | Bolt | 2 |
| 13***2Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
E1-2-2 Circuit, Transmission, 4wd & Differential Lock
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***05 | O Ring | 3 |
| 24***07 | O Ring | 1 |
E1-1-10 Circuit, Front Hitch
| 24***05 | O Ring | 2 |
| 24***05 | O Ring | 3 |
| 25***00 | Valve, Cut Off | 1 |
E1-2-10 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***03 | O Ring | 1 |
E1-2-4 Circuit, Transmission, Front Power Take Off
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***7Z | Bolt | 2 |
E1-2-8 Circuit, Transmission, Front Power Take Off
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt | 1 |
| 24***05 | O Ring | 2 |
E1-2-9 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***06 | O Ring | 4 |
E1-1-8 Circuit, Front Hitch
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 24***05 | O Ring | 3 |
| 24***05 | O Ring | 11 |
E2-1-1 Pump, Steer & Suspension
| 13***07 | Capscrew | 2 |
| 20***02 | Dowel | 6 |
| 20***06 | Washer, Spring | 4 |
E2-3-1 Pump, Steer & Suspension
| 13***7Z | Capscrew, Socket Head | 2 |
| 20***06 | Cap | 1 |
| 20***08 | Cap | 1 |
E2-1-2 Pump, Steer & Suspension
| 20***06 | Washer, Spring | 4 |
| 20***03 | Bolt, 3/8"Unc 162 | 4 |
| 20***04 | O Ring | 1 |
E2-2-1 Pump, Gearbox Low Pressure, & External Hydraulics
| 13***8Z | Bolt, M12 X 30 | 2 |
| 20***03 | Key; Replaced By 20/20***06, See San05154 | 1 |
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
E3-4-3 Optional Fit, Transmission Filter, Temperature Cut Out Switch Kit
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 0 |
| 24***06 | O Ring | 1 |
E3-2-2 Valve, Rear Hitch
| 25***00 | Valve, Rear Hitch | 1 |
| 25***01 | Kit-Solenoid | 1 |
| 25***02 | Kit-Seal | 1 |
E3-4-1 Filter, Hydraulic, Tank Mounted
| 58***12 | Element, Filter, 10 Micron | 1 |
| 58***02 | O Ring | 1 |
| 58***04 | Seal | 1 |
E3-1-3 Valve, Section, 4 Position, With Float
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 1 |
E3-2-1 Valve, Rear Hitch
| 13***8Z | Bolt, M8 X 80mm Long | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***8Z | Capscrew | 3 |
E3-1-4 Valve, Main Relief
| 25***19 | Kit-Seal, Relief Valve | 1 |
| 25***03 | Valve, Mrv; For Details See Frame E3-1-4. Set Releif Valve Pressure When Installed. See Service Manual For Procedure., Valve, Mrv, Valve, Mrv; For Details See Index E3. Set Releif Valve Pressure When Installed, See Service Workshop Manual For Proceedure. | 1 |
E3-1-1 Valve, Components
| 13***9Z | Screw, M10x35mm | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 24***07 | O Ring | 1 |
E3-5-1 Valve, Flow Regulator, Diverter
| 25***02 | Coil, 12v | 1 |
| 25***00 | Valve, Priority, Flow Divider | 1 |
| 25***01 | Valve, Relief, Cartridge | 1 |
E3-3-1 Valve, Solenoid
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***9Z | Capscrew, M8 X 90mm | 2 |
E3-1-2 Valve, Section, 3 Position, Single/Double Acting
| 25***16 | O Ring | 1 |
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E3-4-2 Filter, Transmission
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element | 1 |
| 32***02 | Switch, Pressure Bypass, C/W Cartridge | 1 |
E4-2-1 Ram, Suspension, Option
| 47***03 | Plug | 1 |
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
E4-1-2 Ram, Rear Hitch, Cat Ii
| 47***00 | Ram, Single Acting, 75mm Plunger Type, Ram, Single Acting, 75mm Plunger Type; Cat 2-3 Hitch. For Parts See Frame E4-1-2 | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Rod, Assembly | 1 |
E4-1-3 Ram, Rear Hitch, Cat Iii
| 47***00 | Ram, Single Acting, 80mm Plunger Type; Cat 3 Hitch. For Parts See Freme E4-1-3, Ram, Single Acting, 80mm Plunger Type | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Rod, Assembly | 1 |
E4-1-1 Ram, Front Hitch
| 47***00 | Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod; For Parts See Index E4. Plug Un-Used Ports With 81***18 X 2, Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod; 4 Ports On Cylinder. Blank Un-Used Ports With 81***18 X 2, Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod | 2 |
| 47***01 | Kit-Seal, 60mm Cyl X 30mm Rod | 1 |
| 47***02 | Nut, End | 1 |
E4-1-4 Ram, Suspension
| 47***00 | Ram, Single Acting, Suspension 40mm Dia | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Cylinder | 1 |
E4-1-5 Ram, Rear Hitch, Cat Iii, Option
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***03 | Plug | 1 |
F Axles, Wheels & Transmission
F1-1-2 Axle Drive Head
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
F1-1-3 Hub & Components
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
F1-1-5 Differential, Components, No-Spin
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
| 45***00 | Differential, Case Assembly | 1 |
F1-1-6 Remote Greasing
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 47***00 | Pivot, Remote Greasing, Assembly | 1 |
| 47***01 | Adapter, Self Tapping; Nsp. Not Available Separately, Supply Complete Assembly 47***00 Only | 1 |
F1-1-10 F1-1-10
F1-1-7 Differential, Components, 'Maxtrac'
| 44***08 | Pin, Trunnion | 1 |
| 44***09 | Housing, Differential; Mss Use 44***00 X 1, + 21***16 X 1,, + 13***15 X 8. San 04918 | 1 |
| 44***00 | Differential, Gear Kit | 1 |
F1-1-1 Axle Assembly, Front
| 13***9Z | Screw, M10x35mm | 10 |
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
F2-1-4 Hub & Components
| 13***7Z | Bolt, M10x25 | 4 |
| 13***09 | Bolt | 12 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-1-10 Hub & Components Kit, Upgrade 3 To 4 Pin
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 8 |
| 45***08 | Pad, Thrust | 2 |
F2-1-1 Axle Assembly, Rear
| 13***09 | Bolt | 14 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***03 | Nut | 4 |
F2-1-2 Axle Drive Head
| 04***72 | Switch, Switch; Differential Lock Switch. Use 70***00 + Bridging Harness 71***00 | 1 |
| 13***17 | Bolt | 2 |
| 22***60 | Circlip | 1 |
F2-1-3 Differential, Assembly
| 13***8Z | Bolt, M10x80 | 8 |
| 45***02 | Pin, Trunnion; Use 45***03 | 2 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
F3-1-7 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F3-1-1 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F3-1-5 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, 20.00 X 30.5 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-1-4 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F3-1-2 Axle Lock Stops
| 47***00 | Kit, Axle-Lockstops | 1 |
| 47***01 | Plate, Lock Stop Keeper | 1 |
| 47***02 | Stop, Lock, 30mm Long Head, ( Stamped - '68') | 2 |
F3-1-3 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W15l X 24 | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-2-2 Propshafts, Axle Drive
| 11***25 | Strap | 6 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
F3-2-1 Propshafts
F3-1-6 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, 20.00 X 30.5 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F5-1-6 Clutch Assembly, Power Take Off, Rear
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 14***14 | Washer | 1 |
F5-1-4 Gear Group, Output, Intermediate, Power Take Off Gearbox
| 13***5Z | Screw, Set, M8 X 20 | 5 |
| 22***62 | Circlip, Internal | 1 |
| 22***85 | Circlip, Internal | 1 |
F5-1-3 Gear Group, Input & Idler, Power Take Off Gearbox
| 13***7Z | Bolt, M10x25 | 6 |
| 22***58 | Circlip, Internal | 1 |
| 22***94 | Circlip, Internal | 1 |
F5-1-8 Clutch & Actuation
| 13***06 | Bolt | 8 |
| 13***6Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
F5-1-2 Gearbox, Power Take Off, 2 Speed, Twin Take Off
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Bolt, M10 X 35 | 6 |
| 45***00 | Gearbox, Power Take Off, (Double Take Off) | 1 |
F5-1-7 Clutch Assembly, Power Take Off, Front
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 14***14 | Washer | 1 |
F5-1-1 Gearbox, Power Take Off, 2 Speed, Single Take Off
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Screw, M10 X 35 | 6 |
| 45***46 | Cover, End | 1 |
F5-1-9 Clutch Servo
| 15***08 | Screw, Bleed, 3/8"Unf | 1 |
| 15***26 | Screw Bleed | 1 |
| 47***00 | Clutch, Servo | 1 |
F5-1-5 Clutch Release, Selector Mechanism, Power Take Off Gearbox
| 13***7Z | Bolt, M10x25 | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***35 | Screw; Now Use 44***10 | 6 |
F6-2-10 Gearbox, 6 Speed, Rear Housing, Y04141
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 2 |
F6-2-5 Gearbox, 6 Speed, Input Shaft Assembly, Y04141
| 45***49 | Plunger | 1 |
| 45***50 | Roller, 8mm | 1 |
| 45***51 | Spring, Synchro | 1 |
F6-2-1 Gearbox, 6 Speed, Installation, Y04141
| 12***02 | Plate, Compression | 2 |
| 13***7Z | Bolt, M10x25 | 8 |
| 13***9Z | Screw, M10x35mm | 21 |
F6-1-9 Gearbox, 6 Speed, Remote Control Assy, Y04041
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F6-2-9 Gearbox, 6 Speed, Remote Control Assy, Y04141
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F6-1-6 Gearbox, 6 Speed, Counter Shaft Assy, Y04041
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F6-1-10 Gearbox, 6 Speed, Rear Housing, Y04041
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 2 |
F6-1-7 Gearbox, 6 Speed, Front Cover Assembly, Y04041
| 45***28 | Washer, Spring | 5 |
| 45***97 | Seal, Oil | 1 |
| 45***98 | Screw, M10 | 5 |
F6-2-8 Gearbox, 6 Speed, Selector Controls, Y04141
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F6-2-7 Gearbox, 6 Speed, Front Cover Assembly, Y04141
| 45***28 | Washer, Spring | 5 |
| 45***97 | Seal, Oil | 1 |
| 45***98 | Screw, M10 | 5 |
F6-1-5 Gearbox, 6 Speed, Input Shaft Assembly, Y04041
| 45***62 | Shaft, Input, 6th Gear | 1 |
| 45***68 | Bearing, Roller | 1 |
| 45***73 | Circlip | 1 |
F6-2-2 Gearbox, 6 Speed, Repair Kits Y04141
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F6-1-2 Gearbox, 6 Speed, Repair Kits, Y04041
| 45***00 | Kit, Basic Overhaul | 1 |
| 45***01 | Kit, 1st/2nd Synchro; Use 45***62, San 03901 | 1 |
| 45***02 | Kit, 3rd/4th Synchro; Use 45***63, San 03901 | 1 |
F6-2-6 Gearbox, 6 Speed, Counter Shaft Assy, Y04141
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F6-1-8 Gearbox, 6 Speed, Selector Controls, Y04041
| 45***99 | Block, Selector | 1 |
| 45***21 | Gear, Selector Assembly | 1 |
| 45***22 | Pin | 1 |
F6-2-3 Gearbox, 6 Speed, Case Assemblies, Y04141
| 45***12 | Bush, Selector Shaft | 2 |
| 45***13 | Plug, Cup | 2 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
F6-2-4 Gearbox, 6 Speed, Mainshaft Assembly, Y04141
| 45***06 | Kit, Circlip | 2 |
| 45***44 | Gear, 3rd | 1 |
| 45***45 | Bearing, Needle Roller | 2 |
F6-1-3 Gearbox, 6 Speed, Case Assemblies, Y04041
| 45***10 | Housing, Assembly, Rear | 1 |
| 45***11 | Housing, Rear; Nla Use 45***10 For Mk3 To; M635199, 45***03 For Mk4 From; M635200 | 1 |
| 45***12 | Bush, Selector Shaft | 2 |
F6-2-11 Gearbox, 5 Speed, Remote Control Assy, Y04141
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
F6-1-4 Gearbox, 6 Speed, Mainshaft Assembly, Y04041
| 45***01 | Gear, Output 31t | 1 |
| 45***06 | Kit, Circlip | 3 |
| 45***42 | Shaft, Assembly | 1 |
F6-1-1 Gearbox, 6 Speed, Installation, Y04041
| 12***02 | Plate, Compression | 2 |
| 13***7Z | Bolt, M10x25 | 8 |
| 13***9Z | Screw, M10x35mm | 21 |
F7-1-3 Shaft, Input, And Reverse Gear, Synchro Rangebox ( Spicer )
| 45***07 | Hub, Sleeve | 1 |
| 45***00 | Gear, Assembly Synchro; Replaced By N.L.A. Use 45***00 0r 45***00, + Kit 99***88. See San 12610 | 1 |
| 45***01 | Shaft, Main | 1 |
F7-1-9 Gearbox Housing,, Eaton Synchro.Range, Box
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
F7-1-1 Gearbox,, Spicer
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F7-1-10 Shaft Group,Output, Eaton Synchro.Range, Box Replacement
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
| 45***49 | Plunger | 3 |
F7-1-5 Shaft, Output Group, 4 Wheel Drive, Spicer
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F7-1-11 Shaft,Input,, And Reverser Gear., Eaton Synchro.Rangebox Replacement
| 45***02 | Gear, Input 40t | 1 |
| 45***49 | Plunger | 3 |
| 45***51 | Spring, Synchro | 3 |
F7-2-1 Shaft, Output Group, 4 Wheel Drive, Option
| 14***14 | Washer | 1 |
| 22***63 | Circlip; Replaces 370a0100z | 1 |
| 22***71 | Circlip | 1 |
F7-1-6 Gear Change, Spicer
| 13***5Z | Bolt | 4 |
| 44***20 | Retainer, Spring | 1 |
| 44***21 | Gaiter, Gear Change | 1 |
F7-1-4 Shaft Group, Output, Spicer
| 13***2Z | Bolt | 4 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F7-1-8 Gearbox,, Eaton Synchro.Range, Box.
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F7-1-7 Dipstick Tube, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 15***00 | Nut, Sealastic | 1 |
| 22***04 | Clip, Jubilee | 2 |
F7-1-2 Gearbox Housing,, Spicer
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
F7-1-12 Dipstick & Filler,, Transmission,, Replacement Rangebox
| 02***03 | Olive | 1 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 14***26 | Washer, Seal | 1 |
F7-1-13 Gear Change,Manual, Rangebox,Retrofit
| 13***5Z | Bolt | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***23 | Pin | 1 |
F8-2-3 Guard, Power Take Off, Rear
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 3 |
F8-1-2 Gearbox Transfer, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F8-1-1 Installation, Power Take Off, Front
| 11***25 | Strap | 2 |
| 13***0Z | Bolt, M10 X 40 | 16 |
| 13***1Z | Bolt, M10 X 45mm | 3 |
F8-2-4 Shaft, Adapter
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F8-1-3 Guard, Power Take Off, Front
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 2 |
F8-3-1 Installation, Power Take Off, Rear, Without Hitch
| 14***14 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 44***15 | Breather | 1 |
F8-1-7 Installation, Power Take Off, Front ( Single )
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 2 |
F8-2-1 Installation, Power Take Off, Rear, With Hitch
| 14***14 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 44***15 | Breather | 1 |
F8-2-2 Propshaft, Rear Power Take Off
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F8-2-6 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F8-1-4 Guard, Power Take Off, Front
| 13***3Z | Screw, M8 X 16 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 47***08 | Guard, Rear Section | 1 |
F8-1-6 Gearbox Transfer, Front ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F8-2-5 Guard, Static, Power Take Off, Rear - French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-1-1 Transmission, Gearbox Assembly
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***3Z | Bolt, M12 X 55 | 4 |
| 13***3Z | Bolt, M12 X 130 | 4 |
G Brakes
G1-1-4 Actuator, Air
| 13***2Z | Nut | 2 |
| 47***21 | Piston, Spring Actuator | 1 |
| 47***22 | Capscrew | 8 |
G1-2-10 Valve, Check
| 15***00 | Valve, Non-Return | 1 |
| 15***01 | Kit-Repair, Non-Return Valve | 1 |
G1-7-2 Pump, Antifreeze, Air Trailer Brakes
| 47***00 | Pump, Antifreeze | 1 |
| 47***01 | Kit-Repair | 1 |
| 47***02 | Reservoir | 1 |
G1-1-2 Brake Caliper, Rear
| 45***00 | Brake, Caliper Assembly | 2 |
| 45***01 | Brake, Pad & Pin Kit, Complete Axle; Was 45***05 X 2 + 47***02 X 1.Now Use Kit, 45***01 See San 07537. | 1 |
| 45***02 | Kit-Seal | 1 |
G1-9-1 Valve, Trailer Brake, Italian
| 15***00 | Valve, Trailer Brake | 1 |
| 15***01 | Kit-Repair | 1 |
G1-3-4 Installation Circuit, Single Line, Hydraulic Trailer Braking, Without Hitch
| 13***6Z | Bolt, M8 X 70 | 2 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
G1-2-14 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Brake Threshold | 2 |
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 4 |
G1-1-3 Brake, Parking
| 21***14 | Pin, Split/Cotter | 4 |
| 47***00 | Brake, Assembly, Park; Use 47***00 X 1 + 47***32 X 1, San 04829 | 1 |
| 47***01 | Plug | 1 |
G1-2-7 Valve, Auto-Drain
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***01 | Kit-Repair, Auto Drain Valve | 1 |
G1-3-2 Valve, Brake, Hydraulic Trailer
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Trailer Brake Valve | 1 |
| 25***02 | Seal, Back-Up Ring | 1 |
G1-2-4 Valve, Brake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
G1-2-22 Valve, Brake Threshold
| 15***00 | Valve, Brake Threshold | 1 |
| 99***04 | Kit-Repair, Threshold Valve | 1 |
G1-2-6 Valve, Unloader
| 15***00 | Valve, Unloader | 1 |
| 15***01 | Kit-Repair, Unloader Valve | 1 |
G1-5-1 Circuit, Air Brakes, Cab
| 15***00 | Valve, Handbrake | 1 |
| 15***00 | Valve, Brake | 1 |
| 24***05 | Grommet | 1 |
G1-2-17 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 15***01 | Kit-Repair, Inverse Relay Valve | 1 |
G1-2-11 Coupling, Trailer Brake
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, Palm With Seal - Red | 1 |
| 45***01 | Cap, Dust, Red | 1 |
G1-8-1 Coupling, Trailer Brake, Italy
| 13***9Z | Screw, M10x35mm | 5 |
| 13***3Z | Nut, Lock, M10 | 5 |
| 45***00 | Coupling, Twin | 1 |
G1-2-16 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-2-2 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 4 |
| 15***00 | Valve, Circuit Protection; Use 15/91***00, San 04551 (15/90***00 Used Until M636217) | 1 |
G1-6-1 Circuit, Air Brakes, Cab, 3 Position Handbrake Control
| 15***00 | Valve, Handbrake | 1 |
| 15***00 | Valve, Brake | 1 |
| 20***07 | Tie, Cable - 100mm Long | 1 |
G1-2-9 Valve, Trailer Brake
| 15***00 | Valve, Trailer Brake | 1 |
| 15***01 | Kit-Repair, Supply Dump Valve | 1 |
| 15***02 | Kit-Repair, Trailer Control V/V | 1 |
G1-3-8 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-3-6 Installation Circuit, Air Trailer Brakes
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Nut | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G1-2-8 Actuator, Air/Hydraulic
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 15***00 | Actuator, Air/Hydraulic | 2 |
| 15***01 | Kit-Repair, Air/Hydraulic Actuator | 1 |
G1-4-1 Circuit, Twin Air Guage, Installation
| 24***02 | Grommet | 1 |
| 64***00 | Pipe, Air 3/16" | 0 |
| 64***01 | Tube, Air, 5 Metre Length | 0 |
G1-7-1 Anti-Freeze Pump, Air Brake Circuit
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
G1-3-1 Installation Circuit, Single Line, Hydraulic Trailer Braking, With Hitch
| 13***6Z | Bolt, M8 X 70 | 2 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
G1-2-23 Handbrake Control, 3 Position
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-2-19 Handbrake Control, 3 Position
| 15***00 | Valve, Handbrake | 1 |
| 15***01 | Cover, Assembly | 1 |
| 15***02 | Kit, Repair | 1 |
G1-2-18 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-2-1 Circuit, Air Brakes, Cab, Uk Only
| 13***03 | Bolt | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
G1-2-20 Valve, Brake Threshold
| 13***7Z | Bolt, M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 15***00 | Valve, Brake Threshold | 1 |
G1-2-24 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 99***01 | Kit-Repair, Palm Coupling, Red/Yellow | 1 |
G1-3-7 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Single Line | 1 |
| 45***01 | Kit-Repair | 1 |
| 45***02 | Cover, Dust | 1 |
G1-2-3 Circuit, Air Brakes, Chassis
| 15***00 | Adapter, 'T' | 3 |
| 47***03 | Pipe, Air Intake | 1 |
| 47***04 | Pipe, Rigid 5/8" | 1 |
G1-3-5 Clamps, Brake Circuit
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Bolt, M10x25 | 1 |
G1-2-12 Coupling, Trailer Brake
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, 'C' Type, Female, With Shut Off; Use 45/91***00 Changed @ M636508, San 04954 | 1 |
| 45***00 | Coupling, 'C' Type, Male, With Shut Off; Use 45/91***00 Changed @ M636508, San 04954 | 1 |
G1-2-5 Handbrake Control, 2 Position, Uk Only
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
| 15***01 | Cover, Assembly, Top | 1 |
| 15***02 | Knob | 1 |
G1-10-1 Valve, Unloader, Italian
| 15***00 | Valve, Unloader, C/W 10 Bar Rv | 1 |
| 15***01 | Kit-Repair | 1 |
G1-2-13 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Brake Threshold | 1 |
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 3 |
G1-2-21 Valve, Pressure Reducing
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 15***00 | Valve, Pressure Reducing | 1 |
G1-2-15 Circuit, Air Brakes, Chassis
| 15***00 | Adapter, 'T' | 4 |
| 15***00 | Valve, Pressure Reducing | 1 |
| 47***03 | Pipe, Air Intake | 1 |
G1-3-3 Clamps, Brake Circuit
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
G1-1-1 Brake Caliper, Front
| 45***00 | Brake, Caliper Assembly | 2 |
| 45***01 | Brake, Pad & Pin Kit, Complete Axle; Use 45***05 X 2 + 47***06 X 1, San 04784 | 1 |
| 45***02 | Kit-Seal | 1 |
H Steering
H1-1-3 Steering Shaft, Intermediate
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 47***00 | Shaft, Intermediate Steer, Telescopic | 1 |
H1-1-2 Steering Shaft, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
H1-1-1 Steering, Installation
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
H1-1-5 Steering Column
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***0Z | Bolt, M8x40 | 2 |
H1-1-4 Motor, Steering
| 13***7Z | Bolt, M10x25 | 4 |
| 13***7Z | Bolt | 8 |
| 47***00 | Gearbox, Steering; Use 47***00 | 1 |
S Suspension
S1-2-2 Suspension, Rear, Linkages
| 13***8Z | Bolt, M12 X 30 | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 8 |
| 13***9Z | Bolt, M10x90mm | 8 |
S1-2-3 Valve, Charge
| 25***00 | Valve, Charge | 1 |
| 25***01 | Kit-Seal | 1 |
| 25***02 | Cartridge | 1 |
S1-1-1 Suspension, Front
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt, M10x80 | 4 |
S1-2-4 Suspension, Rear, Rebound Straps
| 13***2Z | Bolt | 2 |
| 13***3Z | Bolt, M20 X 2.5 X 130mm | 2 |
| 13***3Z | Nut, M20 | 4 |
S1-2-1 Suspension, Rear, Hydraulics
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
T Engine
T1-8-1 Engine Mountings, Yb, Build
| 02***42 | Bracket | 1 |
| 02***43 | Bracket | 1 |
| 02***83 | Stud | 4 |
T1-5-7 Fans Pulleys, & Fan Belt, Ya Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-3-2 Block Assembly, Yb Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-2-1 Engine, Short, Ya Build
| 02***60 | Engine, Short, 1006.6 | 1 |
T1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-1-1 Engine, Complete, Ya Build
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 159cc Compressor | 1 |
T1-1-6 Engine, Complete, Yb Build
| 01***00 | Engine, 145t,Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 145t, Turbo, C/W 229cc Compressor | 1 |
T1-5-6 Fans,Pulleys,Fan Bel, T,Yb Build,1006-6t
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-4-8 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***29 | Circlip | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T1-7-1 Flywheel & Housing,, Yb Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 12 |
T1-6-2 Timing Case, Auxilia, Ry Drive, Yb Build
| 02***96 | Key | 2 |
| 02***08 | Dowel | 2 |
| 02***52 | Circlip | 1 |
T1-5-6 Fans,Pulleys,Fan Bel, T,Yb Build,145t/150t
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-5-3 Fans, Pulleys, & Fan Belt, Yb Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-1-7 Engine, Complete, Yb Build
| 01***00 | Engine, 160t, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 160t, Turbo, C/W 229cc Compressor | 1 |
T1-1-2 Engine, Complete, Yb Build
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
T1-2-2 Engine, Short, Yb Build
| 02***61 | Engine, Short, 1006.6t | 1 |
| 02***63 | Engine, Short, 1006-6t,Turbo | 1 |
T1-4-6 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***29 | Circlip | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T1-8-1 Engine Mountings, Ya, Build
| 02***42 | Bracket | 1 |
| 02***43 | Bracket | 1 |
| 02***83 | Stud | 4 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ya Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 6 |
T1-3-1 Block Assembly, Ya Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-6-1 Timing Case, Camshaf, T & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-2-6 Engine, Short, Yb Build
| 02***62 | Engine, Short | 1 |
T1-6-2 Timing Case, Auxilia, Ry Drive, Ya Build
| 02***96 | Key | 2 |
| 02***08 | Dowel | 2 |
| 02***52 | Circlip | 1 |
T1-1-4 Engine, Complete, Yb Build
| 01***00 | Engine, 1006-6t, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 229cc Compressor | 1 |
T1-7-1 Flywheel & Housing,, Ya Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 12 |
T1-6-3 Timing Case, Camshaft & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-2-8 Engine, Short, Yb Build
| 02***64 | Engine, Short | 1 |
T1-1-3 Engine, Complete, Ya Build
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 229cc Compressor | 1 |
T1-5-4 Fans, Pulleys, & Fan Belt, Optional, Yb Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-5-5 Fans, Pulleys, & Fan Belts, Fixed Fan, 1.25 : 1 Ratio Australian Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-5-2 Fans, Pulleys, & Fan Belt, Optional, Ya Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-5-1 Fans, Pulleys, & Fan Belt, Ya Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-6-1 Timing Case, Camshaf, T & Gears, Ya Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T2-3-1 Rocker Cover, Ya Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***39 | Cap, Oil Filler | 1 |
T2-4-1 Lifting Plates, Engi, Ne, Yb Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
T2-1-1 Cylinder Head, Ya Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-3-1 Rocker Cover, Yb Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***39 | Cap, Oil Filler | 1 |
T2-1-4 Cylinder Head, Yb Bu, Ild, 145t/160t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-1-2 Cylinder Head, Yb Bu, Ild, 145t/160t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Yb
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-4-1 Lifting Plates, Engi, Ne, Ya Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
T2-1-4 Cylinder Head, Yb Bu, Ild, 1006-6t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-1-2 Cylinder Head, Yb Bu, Ild, 1006-6t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Ya
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T3-3-2 Filter, Air, Yb Build
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-4-2 Exhaust System, Yb Build
| 02***16 | Nut | 6 |
| 13***8Z | Screw, M8x30 | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
T3-2-1 Manifold, Exhaust, Ya Build
| 02***04 | Gasket | 2 |
| 02***43 | Manifold, Exhaust | 1 |
| 02***15 | Gasket | 1 |
T3-4-1 Exhaust System, Ya Build
| 02***19 | Gasket | 1 |
| 02***03 | Stud | 3 |
| 02***61 | Nut | 3 |
T3-1-2 Manifold, Induction, Yb Build
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
| 02***73 | Hose, Induction | 1 |
T3-1-1 Manifold, Induction, Ya Build
| 02***10 | Plug | 1 |
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
T3-3-1 Filter, Air, Ya Build
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-2-2 Manifold, Exhaust, Yb Build
| 02***04 | Gasket | 2 |
| 02***15 | Gasket | 1 |
| 02***49 | Manifold, Exhaust | 1 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Ya
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-1-1 Pump, Water, Yb Buil, D
| 02***82 | O Ring | 1 |
| 02***84 | Seal | 1 |
| 02***85 | Cover | 1 |
T4-4-1 Radiator & Hoses, Yb, Build
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 13***3Z | Screw, M8 X 16 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
T4-4-1 Radiator & Hoses, Ya, Build
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 13***3Z | Screw, M8 X 16 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
T4-3-1 Radiator Fittings &, Mountings, Ya Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Yb
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-3-1 Radiator Fittings &, Mountings, Yb Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
T4-1-1 Pump, Water, Ya Buil, D
| 02***82 | O Ring | 1 |
| 02***84 | Seal | 1 |
| 02***85 | Cover | 1 |
T5-4-1 Filter, Oil, Ya Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***10 | Plug | 1 |
| 02***88 | Head, Oil Filter | 1 |
T5-5-2 Cooler, Oil, & Pipework, Yb Build
| 02***08 | Spring | 1 |
| 02***16 | O Ring | 2 |
| 02***17 | O Ring | 4 |
T5-2-2 Pump, Oil, & Relief Valve, Yb Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-4-2 Filter, Oil, Yb Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 02***96 | Gasket | 1 |
| 02***93 | Head, Oil Filter | 1 |
T5-1-1 Sump, Oil & Fittings, , Yb Build
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***02 | Plug | 1 |
T5-3-1 Piston Cooling Jets, Yb Build
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
T5-5-1 Cooler, Oil, & Pipework, Ya Build
| 02***08 | Spring | 1 |
| 02***16 | O Ring | 2 |
| 02***17 | O Ring | 4 |
T5-1-1 Sump, Oil & Fittings, , Ya Build
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***02 | Plug | 1 |
T5-2-1 Pump, Oil, & Relief Valve, Ya Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Ya Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 3 |
T6-4-1 Fuel Pipes, Tank To Filter, Standard, Ya Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-7-1 Filter, Fuel, Ya Bui, Ld
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-7-1 Filter, Fuel, Yb Bui, Ld
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-1-6 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-6-1 Filter, Fuel Sedimen, T, Ya Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-6-1 Filter, Fuel Sedimen, T, Yb Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-3-6 Fuel Pipes, Injection Pump, Yb Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
T6-1-7 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-2-2 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 3 |
T6-3-1 Fuel Pipes, Injection Pump, Ya Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 2 |
T6-8-1 Pump, Fuel Lift, Yb, Build
| 02***72 | Plate, Keep | 2 |
| 02***94 | Gasket | 1 |
| 02***18 | Bolt | 4 |
T6-3-2 Fuel Pipes, Injection Pump, Yb Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 4 |
| 02***18 | Nut | 2 |
T6-2-6 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***05 | Seal | 6 |
| 02***10 | Spacer | 6 |
T6-1-2 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-5-2 Fuel Heater, & Fuel Feed Pipe, Yb Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 3 |
T6-8-1 Pump, Fuel Lift, Ya, Build
| 02***72 | Plate, Keep | 2 |
| 02***94 | Gasket | 1 |
| 02***18 | Bolt | 4 |
T6-4-2 Fuel Pipes, Tank To, Filter, Optional, Ya
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-1-1 Pump, Fuel Injection, Ya Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Ya Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 4 |
T6-4-2 Fuel Pipes, Tank To, Filter, Yb Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T7-2-5 Turbo, Pipework, Yb Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
T7-5-1 Compressor, Installation, Air Conditioning
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
T7-3-1 Compressor, Air, Ya, Build
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***00 | Compressor | 1 |
T7-2-1 Turbo, Pipework, Yb Build
| 02***84 | Hose, Oil Drain | 1 |
| 02***75 | Gasket | 1 |
| 02***80 | Gasket | 1 |
T7-1-1 Turbocharger, Yb Build
| 02***09 | Shaft, & Impellor Assembly | 1 |
| 02***12 | Kit-Repair, Turbocharger | 1 |
| 02***67 | Collar, Thrust | 1 |
T7-3-2 Compressor, Air, 229cc
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***02 | Key, Woodruff | 1 |
T7-4-2 Compressor Pipework, 229cc
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-5-3 Compressor, Installation, Air Conditioning
| 13***1Z | Bolt, M10 X 45mm | 1 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
T7-4-1 Compressor Pipework,, Yb Build
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-4-1 Compressor Pipework,, Ya Build
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-5-2 Compressor, Installation, Air Conditioning
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
T7-3-1 Compressor, Air, Yb, Build
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***00 | Compressor | 1 |
T7-6-1 Compressor, Air Conditioning
| 26***05 | Kit-Seal, & Felt Ring Assembly | 1 |
| 26***06 | Ring, Snap | 1 |
| 47***00 | Compressor, Air Conditioning; Must Be Used With 2 Off 47***49 | 1 |
T7-2-2 Turbo, Heatshield, Yb Build
| 02***77 | Shield, Heat | 1 |
| 02***78 | Spacer | 2 |
| 02***16 | Nut | 2 |
T8-2-2 Kit, Engine Overhaul, Yb Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
T8-1-1 Gasket Sets, Yb Buil, D
| 02***02 | Kit-Gasket, Top | 1 |
| 02***03 | Kit-Gasket, Bottom | 1 |
| 02***83 | Kit-Gasket, Top | 1 |
T8-2-1 Kit, Engine Overhaul
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
T8-2-3 Kit, Engine Overhaul, Yb Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
T8-1-1 Gasket Sets, Ya Buil, D
| 02***02 | Kit-Gasket, Top | 1 |
| 02***03 | Kit-Gasket, Bottom | 1 |
| 02***83 | Kit-Gasket, Top | 1 |
FASTRAC 130t-65 serial number reference
Locate the machine identification plate on the JCB FASTRAC 130t-65 to confirm the serial number falls within the sourced range and verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 00635001-00635994 | FASTRAC 130t-65 (FASTRAC & CONTRACTOR series, catalog code the OEM part reference) |
Frequently asked questions
What engine does the JCB Fastrac 130t-65 use?
The JCB Fastrac 130t-65 uses a Perkins 6L six-cylinder diesel engine.
What is the operating weight of the JCB Fastrac 130t-65?
The operating weight is approximately 14,300 to 14,400 lb (6,486 to 6,532 kg), varying by configuration.
What model replaced the JCB Fastrac 130t-65?
The Fastrac 130t-65 was succeeded by the Fastrac 135 and 155 models in the early generation lineup.
What FASTRAC 130t-65 owners discuss
What engine powers the JCB FASTRAC 130t-65?
The JCB FASTRAC 130t-65 is powered by a Cummins 5.9-litre engine. This engine is part of the QSB series used in later Fastrac models, providing high torque for road and field work.
What are the common hydraulic and transmission behaviors noted for this machine type?
The FASTRAC 130t-65 utilizes a synchromesh transmission with multiple forward and reverse gears, rather than a continuously variable transmission (CVT). Hydraulic systems on earlier models are noted as being less robust than later iterations; some users report poor hydraulic performance when pulling heavy loads like grain carts or sprayers.
What undercarriage or wear patterns are typical for the FASTRAC series?
The FASTRAC series features a full suspension chassis designed for high-speed road transport and stability. Common wear points include the Spicer drive train universal joints, which can fail expensively if not regularly greased. The outboard disc brakes are a standard feature, offering easier pad replacement and no oil contamination issues compared to internal wet brakes.
Are there specific engine quirks per series for the FASTRAC 130t-65?
The 130t-65 falls within the early Fastrac generation (1992–1994). While specific quirks for the 130t-65 are not detailed in the sources, early Fastrac models (1990–2000) are generally noted for reliability issues. Later models (3000 series and above) are considered significantly more reliable. The 130t-65 shares the Cummins engine lineage with later models like the 3190, which uses the QSB 5.9-litre unit.
What are the common electrical or sensor issues discussed by owners?
Early Fastrac models (1990–2000) had a reputation for electrical fires and complex wiring issues due to the use of few wire colors, making troubleshooting difficult. Later models, including the 3000 series and beyond, improved significantly. Electric spools on 'plus' models are known to fail frequently and are expensive to replace, leading some owners to convert to manual spools.
What should be checked when buying a used FASTRAC 130t-65?
When buying a used FASTRAC 130t-65, check the condition of the drive train universal joints and Spicer joints for wear. Inspect the electrical system for signs of previous fire damage or poor repairs, especially given the early model's wiring complexity. Verify transmission gear engagement, as the synchromesh gearbox can be difficult to shift if not well-maintained. Also, check the cooling system for silicate separation sludge in the expansion bottle, which indicates overdue coolant changes.
What safety-critical fix is associated with the cooling system?
The cooling system relies on silicate-based corrosion protection. If the coolant is not changed at recommended intervals, silicate separation occurs, leading to brown sludge in the expansion bottle and potential engine damage. Have your dealer verify the coolant condition and service history to prevent overheating and corrosion.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 130t-65. Related factory variants of the same model family:
FASTRAC 130t-65
Need a specific FASTRAC 130t-65 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.