JCBagriculturalfastrac
Jcb FASTRAC 130t
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 130t is a high-speed agricultural tractor produced from 1992 to 1994. It belongs to the original Fastrac generation, preceding the 1100 series. The machine features a Perkins 6L six-cylinder diesel engine and a synchromesh transmission. Operating weight is approximately 6,520 kg (14,374 lb). Configurations include 4WD and selectable front axle drive. The Fastrac 130t is part of the early 120–160 hp class designed for road hauling and fast field work.
The Fastrac 130t differs from later generations by its mechanical synchromesh gearbox and Perkins engine, whereas later models adopted Cummins engines and powershift or CVT transmissions. The machine matters in the used market for its durable Perkins powertrain and simple hydraulic steering, which appeals to operators seeking reliability over complex electronics. Parts availability remains strong due to the large fleet of early Fastrac models still in service.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 130t specifications
Engine
| Model | Perkins 1000 |
| Gross Power | 93.2 kW (125 hp) |
| Net Power | 93.2 kW (125 hp) |
| Displacement | 5.98 L (365.2 cu in) |
| Cylinders | 6 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 6,520 kg (14,374 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 5.76 m (226.8 in) |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | 2.91 m (114.6 in) |
| Wheelbase | Not documented for this exact serial range — verify with your dealer |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speeds | Not documented for this exact serial range — verify with your dealer |
| Lift Capacity | 7,000 kg (15,435 lb) @ 610 mm (24 in) |
| Drawbar Pull | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb FASTRAC 130t maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the FASTRAC 130t beyond the schedule
Predictive Maintenance & Fluid Analysis
At 500 hours, take oil samples from the engine, hydraulic, and axle systems to establish a baseline. Monitor for metallic debris on the hydraulic return filter magnet. Check engine oil level daily via the dipstick. Inspect coolant expansion tank level every 10 hours. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil. Replace primary and secondary fuel filters at 250 hours to protect the Perkins injection system. Check battery electrolyte levels at 500 hours.
Corrective & Common Repairs
Inspect alternator and fan belt tension at 250 hours. Check turbocharger shaft play and charge cooler boots at 1000 hours. Replace hydraulic return filter and inspect for debris at 500 hours. Check front and rear axle oil levels at 500 hours. Inspect hydraulic hoses for chafing and cylinder rods for scoring. Replace engine oil and filter at 250 and 500 hours. Check slew ring bolt torque at 1000 hours.
Overhaul & Rebuild Points
At 2000 hours, replace hydraulic oil and clean the tank. Inspect chassis and boom for cracking or unauthorized welding. Measure swing ring play with a dial indicator. Inspect brake disc wear and immersed brake condition. Check injector spray patterns via diagnostic tool. Service cab HVAC system and replace cabin filter. Replace transmission oil and filter at 1000 hours. Replace front and rear axle oil at 1000 hours.
Seasonal & Environment Servicing
Check coolant expansion tank level every 10 hours. Replace engine coolant and flush system at 1000 hours. Inspect tires for pressure and cut damage every 10 hours. Drain water separator from fuel tank every 10 hours. Lubricate all grease points on front and rear axles at 250 hours. Check battery electrolyte level and terminal tightness at 500 hours. Inspect cab HVAC system at 2000 hours.
FASTRAC 130t common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/906900 | Filter, Air | Air intake service | Check fitment → |
| 32/909700 | Filter, Air, Paper | Air intake service | Check fitment → |
| 32/208300 | Filter, Air | Air intake service | Check fitment → |
| 02/100284 | Element, Oil Filter, Canister Type-Short | Lubrication service | Check fitment → |
| 02/200393 | Head, Oil Filter | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 130t fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0335 | Crankshaft Position Sensor 'A' Circuit - No Signal | Faulty crankshaft position sensor, damaged wiring harness, or sensor alignment issue. | Inspect the crankshaft position sensor connector for corrosion or damage; check wiring continuity and sensor gap. |
| P0330 | Knock Sensor 1 Circuit | Faulty knock sensor, open circuit, or short to ground. | Check the knock sensor mounting and electrical connections; replace sensor if circuit integrity is confirmed. |
| P0101 | Mass or Volume Air Flow (MAF) Sensor Circuit Range/Performance | Dirty or faulty MAF sensor, air intake leak, or restricted air filter. | Clean the MAF sensor element; inspect air intake ducting for leaks or blockages. |
| P0102 | MAF Sensor Circuit Low Input | MAF sensor short to ground, open circuit, or severe air leak before the sensor. | Verify MAF sensor voltage output; check for disconnected intake hoses or damaged wiring. |
| P0103 | MAF Sensor Circuit High Input | MAF sensor short to voltage, open circuit, or excessive air entering after the sensor. | Check MAF sensor power and ground circuits; inspect for unmetered air leaks downstream of the sensor. |
| P029B | Injector Drift Fault Detection on Injector 2 | Fuel injector 2 mechanical drift, faulty injector solenoid, or high-pressure rail issue. | Test Injector 2 resistance and operation; check high-pressure fuel lines for leaks or restrictions. |
| P0321-87 | CAN Bus Message Error for Engine Speed from Engine ECU | CAN bus communication fault, ECU software glitch, or wiring harness interference. | Inspect CAN bus wiring for damage or corrosion; verify ECU power and ground connections. |
| P0340 | Camshaft Position Sensor Circuit - Last Learnt Value Outside Limits | Faulty camshaft position sensor, timing chain/belt stretch, or sensor alignment issue. | Verify camshaft timing alignment; inspect camshaft position sensor and its wiring. |
| P0100 | AMF High Side Driver Fault (Global) | Faulty high-side driver in the ECU, short circuit in connected actuators, or open circuit. | Disconnect connected actuators one by one to isolate short; check ECU driver output voltage. |
| K4013 | Fuel System Fault (Specific to Fastrac the OEM part reference Series) | Fuel filter blockage, fuel pump issue, or air in the fuel system. | Replace fuel filters; bleed the fuel system to remove air; check fuel pump operation. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
FASTRAC 130t attachments & work tools
Demountable Modules
The JCB Fastrac range supports demountable rear modules, including tipper bodies for bulk materials and liquid tanks, as well as flatbed configurations with tension straps. These modules attach to the rear deck, leveraging the tractor's advanced suspension for stability during transport.
Front Loader Attachments
Optional front loader brackets are available for the Fastrac series, allowing for the mounting of loader buckets or specialized front attachments. The central cab position provides operator visibility for maneuvering these front-mounted implements.
Agricultural Implements
The tractor is compatible with a wide range of agricultural implements for arable, livestock, and mixed farming operations, including cultivators, drills, sprayers, and forage equipment. The rear hitch and hydraulic system support standard farm machinery integration.
Grain Handling Equipment
JCB offers specialized grain shovels and re-handling equipment manufactured from high-strength Domex steel, with widths ranging from 2.13 m to 2.44 m. These attachments include quick-release bristle cartridges and are designed for durability in grain handling applications.
Hydraulic & PTO Systems
The Fastrac 130T utilizes a hydraulic system with front lift rams and auxiliary flow regulators, supported by a PTO transfer box. Service manuals for the Fastrac 125–185 range provide reference data for hydraulic control valves and circuit diagrams for implement integration.
All FASTRAC 130t assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 130t. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-2-8 Trailer Coupling
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***00 | Coupling, Trailer 38.5mm Pin, 'Rockinger 260' | 1 |
A3-3-2 Lift Rod Assembly
| 47***00 | Rod, Lift, Assembly | 2 |
| 47***01 | Rod, Top Connector | 1 |
| 47***02 | Cover | 1 |
A3-4-1 Guard, Propshaft
| 47***01 | Guard, 'Undersheet' | 1 |
| 47***02 | Cord, Shock 12" | 10 |
| 47***03 | Cord, Shock 6" | 4 |
A3-1-3 Claw Hitch Cat.2
| 47***03 | Bush, Tension Pin | 1 |
| 47***00 | Hitch, Ball Assembly, Cat 2, Hitch, Ball Assembly, Cat 2; Used With 47***01 On Page A3-4-1. Weld On | 1 |
| 47***02 | Latch, Claw | 1 |
A3-2-6 Claw Hitch Cat.3
| 47***05 | Spring | 1 |
| 47***10 | Hitch, Ball Assembly, Cat 3 | 2 |
| 47***12 | Latch, Claw | 1 |
A3-10-1 Kits
| 47***0K | Kit, Weights Only, (16 Wts) | 1 |
| 47***0K | Kit, Weights Only, (15 Wts) | 1 |
| 47***0K | Kit, 16 Weights &, Front Hitch Carrier | 1 |
A3-1-1 Hitch Assembly, Front
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***0Z | Bolt, M20 X 100mm | 4 |
A3-1-6 Hitch Assembly, Din 5
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 4 |
A3-2-25 Swinging Drawbar, Piton Option, Without Ladder Hitch
| 13***8Z | Bolt, M20 X 80mm | 4 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
A3-5-1 Hitch Assembly, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-2-11 Rear Deck, Support Frame, & Cover, Heavy Duty
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-7-1 Rear Under Run Bar
| 47***12 | Pin, Pivot; German- Use With Ladder Hitch. For Use When Pick Up Hitch Is Not Fitted & Rockinger Ladder Hitch Is Mounted, Pin, Pivot | 1 |
| 47***13 | Pin, Pivot, 25mm X 145mm | 2 |
| 47***07 | Ball, Cat 3-2 | 2 |
A3-2-4 Hitch Assembly, Rear, Lift
| 13***4Z | Bolt, M20 X 60mm | 1 |
| 13***8Z | Bolt, M20 X 80mm | 6 |
| 13***0Z | Bolt, M20 X 100mm | 4 |
A3-2-16 Trailer Coupling, Ladder Hitch, Scharmuller
| 47***00 | Coupling, Ladder Hitch, Non-Automatic | 1 |
| 48***91 | Pin, Ladderhitch Coupling | 1 |
A3-2-17 Trailer Coupling, Ladder Hitch, Low & High Speed, Scharmuller
| 47***00 | Coupling, Ladder Hitch, Pin = 30mm O/D; Tractor Weight 9500 Kg. Operating Speeds Up To & Including 40 Kph, Coupling, Ladder Hitch, Pin = 30mm O/D; Not For Use In Italy. For Tractor Operating Speeds Of 40km/H & Less. | 1 |
| 47***00 | Coupling, Ladder Hitch, Pin = 38mm O/D; Not For Use In Italy. For Tractor Operating Speeds In Excess Of 40 Km/H, Coupling, Ladder Hitch, Pin = 38mm O/D; For Central Trailer Axle Weight 13000 Kg. For Operating Speeds Above 40 Kph | 1 |
A3-2-10 Ladder Hitch, Assembly, Rockinger
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-1-7 Top Link Extension, Uk Front Hitch
| 47***02 | Bracket, Top Link Extension | 1 |
| 47***13 | Pin, Pivot, 25mm X 145mm | 2 |
| 82***66 | Pin, Lynch | 2 |
A3-1-4 Weight Tray Assembly, Front, No Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Counterweight, 40kg | 16 |
A3-2-9 Rear Deck, Support Frame
| 13***2Z | Bolt | 2 |
| 13***2Z | Bolt, M16x50m | 12 |
| 13***3Z | Nut, M20 | 2 |
A3-2-3 Hitch Assembly, Rear
| 13***9Z | Bolt, M10 X 35 | 6 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***3Z | Nut, M20 | 10 |
A3-2-5 Drawbar Assembly
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 2 |
A3-3-1 Stabiliser
| 47***00 | Rod, Stabiliser Assembly, Cat 2-3 Narrow | 2 |
| 47***01 | Rod, Adjusting Link | 1 |
| 47***02 | Tube, Connecting, 430mm Long | 1 |
A3-3-5 Lift Rod Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***03 | Shaft | 1 |
| 47***04 | Pin, Spring | 1 |
A3-2-13 Trailer Coupling, Ladder Hitch, 248rd, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 3 |
| 47***15 | Nipple, Grease - Drive In | 2 |
A3-2-1 Pick-Up Hitch
| 14***9Z | Washer | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-1-2 Weight Tray Assembly, Front
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***00 | Link, Top | 1 |
A3-2-15 Ladder Hitch, Assembly, Scharmuller
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-2-18 Trailer Coupling, Ladder Hitch, Scharmuller, Italian
| 47***00 | Coupling, Trailer, Cat.D3 | 1 |
| 47***00 | Coupling, Trailer, Cat.D2 | 1 |
| 47***00 | Coupling, Trailer, Cat C | 1 |
A3-2-20 Swinging Drawbar, Piton Option, With Ladder Hitch
| 13***8Z | Bolt, M20 X 80mm | 4 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
A3-4-2 Guard, Propshaft, Front Pto
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 47***01 | Guard, Front Power Take-Off Propshaft, Front Section | 1 |
| 47***02 | Guard, Front Power Take-Off Propshaft, Rear Section | 1 |
A3-5-5 Front Din 3 Plate, & Tow Point
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***4Z | Bolt, M16x60 | 4 |
A3-2-2 Drawbar Assembly
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 2 |
A3-6-1 Weight Tray Assembly, Front, No Hitch
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***1Z | Nut | 2 |
| 13***3Z | Nut, M20 | 4 |
A3-3-3 Top Link Assembly
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
| 47***00 | Link, Top, Cat 2 | 1 |
| 47***01 | Rod, Eye End Cat 2 | 1 |
A3-2-7 Pto Casting Assembly, Rear, With Rear Hitch
| 47***00 | Unit, Rear Power Take-Off Casting, Assembly | 1 |
A3-3-4 Top Link Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***00 | Link, Top Cat 3 | 1 |
| 47***01 | Rod, Eye End Cat 3 | 1 |
A3-1-5 Hitch Assembly, Din 3
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 4 |
A3-2-14 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-2-12 Rear Deck, "Light" Cover
| 13***7Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
B Bodywork, Cab, Loader End
B1-1-1 Chassis & Fitments
| 13***2Z | Bolt | 2 |
| 13***1Z | Bolt, M12 X 45 | 24 |
| 13***6Z | Bolt, M12 X 70mm | 8 |
B1-1-3 Pannier Unit, Right Hand
| 13***7Z | Bolt, M10x25 | 12 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
B1-1-8 Bonnet & Fittings
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 20 |
| 13***8Z | Screw, M8x30 | 2 |
B1-5-1 Engine Access Steps
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***3Z | Nut, M12 | 4 |
B1-1-9 Bonnet Release
| 12***00 | Latch, Claw | 2 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***8Z | Bolt, M10 X 30 | 1 |
B1-4-1 Mounting, Front Lights
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M12 X 30 | 6 |
| 13***3Z | Nut, Lock, M10 | 4 |
B1-1-13 Bonnet Release
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***1Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
B1-1-2 Pannier Unit, Left Hand
| 13***7Z | Bolt, M10x25 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 16 |
| 13***3Z | Nut, Lock, M10 | 10 |
B1-1-11 Bodywork, Rear End Less Hitch
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***8Z | Bolt, M12 X 80mm | 4 |
| 13***4Z | Bolt, M20 X 60mm | 8 |
B1-2-1 Pannier Unit, Left Hand
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Screw, M10x35mm | 2 |
B1-1-12 Mounting, Chock
| 13***8Z | Bolt, M12 X 30 | 3 |
| 47***01 | Frame, Support | 1 |
| 47***02 | Screw, Clamping | 1 |
B1-1-4 Tank, Fuel
| 47***03 | Cap, Filler | 1 |
| 47***01 | Tank, Fuel, Plastic, 300 Litres; Use 47***00 | 1 |
| 47***00 | Cap, Filler | 1 |
B1-1-5 Fenders, Front & Rear
| 13***5Z | Bolt | 4 |
| 13***2Z | Bolt, M16x50m | 4 |
| 13***4Z | Bolt, M16x60 | 4 |
B1-1-10 Mounting, Front Lights
| 13***5Z | Bolt, M5 X 20mm Long | 16 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut | 12 |
B1-3-1 Pannier Unit, Right Hand
| 13***7Z | Bolt, M10x25 | 8 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***4Z | Bolt, M10x60 | 1 |
B1-1-6 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 13***5Z | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-1-7 Mounting, Front Lights
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***9Z | Bolt, M16 X 35mm | 2 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
B1-1-14 Fenders, Front & Rear
| 13***2Z | Bolt, M16x50m | 4 |
| 13***4Z | Bolt, M16x60 | 4 |
| 13***3Z | Nut, Lock, M10 | 28 |
B2-2-4 Toolbox
| 13***5Z | Bolt | 3 |
| 14***6Z | Washer, M6 | 3 |
| 47***09 | Cover, L.H. Tool Box | 1 |
B2-2-3 Soundproofing, Cab
| 13***2Z | Screw, M6 X 50 | 1 |
| 14***6Z | Washer, M6 | 1 |
| 47***14 | Panel, Roof Liner R.H. | 1 |
B2-1-15 Mirrors, External
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-1-14 Door, Right Hand, Manual Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-1-3 Cab Base
| 13***5Z | Bolt | 18 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 18 |
B2-1-8 Door, Right Hand, Electric Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B2-1-13 Door, Left Hand, Manual Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-1-5 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 8 |
B2-3-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-1-1 Cab
| 47***01 | Cab, Assembly; Options = B & F. Cab C/W Controls & Instruments, External Trim & Hatch, & Air Conditioning. | 1 |
| 47***02 | Cab, Assembly | 1 |
| 47***03 | Cab, Assembly | 1 |
B2-2-1 Radio Console
| 13***5Z | Bolt | 5 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 14***6Z | Washer, M6 | 5 |
B2-2-5 Visor, Sun
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 47***00 | Blind, Sun Visor | 1 |
B2-1-4 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***50 | Glazing, Front Screen | 1 |
| 82***51 | Glazing, Lower Screen R.H. | 1 |
B2-2-7 Seat, Standard, Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-1-9 Door, Window Regulator, Left Hand
| 13***03 | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***05 | Washer, 'P' | 1 |
B2-2-10 Soundproofing, Cab
| 47***20 | Panel, Liner, Roof Hatch | 1 |
| 47***39 | Panel, Roof Lining L.H. | 1 |
| 47***40 | Panel, Roof Lining R.H. | 1 |
B2-2-8 Seat, Suspension, Air
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-2-6 Seat, Passenger
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***00 | Seat, Passenger | 1 |
B2-1-6 Cab, Roof Hatch
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
B2-1-2 Cab Frame
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***01 | Panel, Front R.H., Yellow | 1 |
B2-1-12 Cab Insulation
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 1 |
| 47***10 | Bracket, Harness Mounting | 4 |
B2-1-11 Light, Working, Blanking Kit
| 14***03 | Screw, 5/8" No 6, Black | 8 |
| 24***01 | Grommet, Blind | 2 |
| 24***08 | Grommet, Blind | 2 |
B2-1-10 Door, Window Regulator, Right Hand
| 13***03 | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***05 | Washer, 'P' | 1 |
B2-2-11 Seat Belt
| 47***00 | Kit, Seat Belt, Kit, Seat Belt; Contains All Parts Necessary To Fit. Introduced On Production Builds As An Option From M635637 | 2 |
B2-1-7 Door, Left Hand, Electric Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-2-2 Panel, Instrument, Covers & Brackets
| 13***1Z | Nut | 2 |
| 47***30 | Strip, Foam | 0 |
| 47***41 | Panel, Heater Outlet Duct; Use 47***39, San 04436 | 1 |
B2-2-9 Seat Belt, Optional
| 13***6Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
B5-3-1 Tool Kit, Park Brake Release
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 47***00 | Kit, Parkbrake Release | 1 |
| 47***01 | Spanner | 2 |
B5-1-3 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-1-6 Mounting, 40 Kph Sign
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
B5-1-5 Decals, Cab Interior
| 47***35 | Plate, Blanking; For Use When Rear Hitch Is Not Fitted. To Blank Hitch Release Lever Slot In Side Console., Plate, Blanking | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
B5-1-4 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-1-2 Decals, Cab Interior
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-2-1 Paint
| 42***04 | Paint, Red, 1 Litre | 1 |
| 42***06 | Paint, Red, 5 Litres | 1 |
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
B5-1-1 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-5-1 Identification, Serial Plates
B5-4-1 Lubrication
| 40***01 | Oil, Jcb T/C-25 Litre, Type C3 Sae 10w | 1 |
| 40***02 | Oil, Jcb T/C-5 Litre, Type C3 Sae 10w | 1 |
| 40***03 | Oil, Jcb T/C - 200 Litres, Sae 10w | 1 |
C Electrics-Machine, Cab & Engine
C1-2-7 Light, Head
| 26***00 | Headlight, R/H. Dip, 12 Volt, Clear | 2 |
| 26***00 | Headlight, R.H. Dip, 12 Volt, Yellow; Use 26***00 Light,Clear.San5287 23/12/94 | 2 |
| 26***00 | Headlight, L/H. Dip, 12 Volt, Clear | 2 |
C1-1-1 Harness, Machine Electrics
| 71***00 | Relay, Black, Relay, Black; 2 Starter Relays In Panel Harness. Located By Foot Pedal R.H. Mounting Bracket | 2 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
| 71***00 | Harness, Esos | 1 |
C1-1-4 Mountings & Supports, Harness
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 20 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
C1-3-2 Air Conditioning, Installation, Engine Bay
| 13***2Z | Bolt, M6 X 50 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C1-1-2 Switches, Electrical
| 04***72 | Switch, Switch; Differential Lock Switch. Use 70***00 + Bridging Harness 71***00 | 1 |
| 13***9Z | Screw, M5 X 35mm | 3 |
| 13***9Z | Screw, M10x35mm | 2 |
C1-1-6 Harness, Machine Electrics, Electronic Draft Control
| 71***00 | Harness, Cab, Electronic, Draft Control | 1 |
| 71***00 | Harness, Chassis, Electronic, Draft Control | 1 |
| 71***00 | Harness, Rear Fender, Edc | 1 |
C1-1-3 Harness, Machine Electrics, Electronic Draft Control
| 71***00 | Harness, Cab, Electronic, Draft Control | 1 |
| 71***00 | Harness, Chassis, Electronic, Draft Control | 1 |
| 71***00 | Harness, Fender, Electronic, Draft Control | 2 |
C1-2-3 Light, Beacon, Hazard Warning
| 12***19 | Plate, Beacon Mounting | 1 |
| 47***31 | Plate, Beacon Mounting; Bond To Cab Roof. See Service/Workshop Manual For Adhesives. | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-2-5 Horn, Single Tone
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***6Z | Washer, M6 | 1 |
C1-4-1 Light, Number Plate, Italian
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***07 | Spacer | 2 |
C1-3-1 Air Conditioning, Installation, Engine Bay
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 24***13 | Grommet | 1 |
C1-2-6 Light, Marker, Cab Mounted
| 20***07 | Tie, Cable - 100mm Long | 20 |
| 47***01 | Plate, Backing | 2 |
| 70***00 | Light, End Outline Marker | 2 |
C1-1-20 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-1-5 Harness, Machine Electrics
| 70***00 | Switch, Vacuum Sensor | 1 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
| 71***00 | Harness, Connector | 1 |
C1-2-2 Light, Indicator, Front
| 13***3Z | Nut | 4 |
| 70***00 | Light, Indicator | 2 |
| 70***01 | Lens | 1 |
C1-2-8 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-2-1 Light, Head
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***3Z | Nut | 8 |
| 70***00 | Light, Head, White, Left Hand Dip; San25865.Had Been Made Nsp By Persons Unknown, Reinstated By P Gamble 14/5/2008. | 1 |
C1-2-4 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***00 | Light, Cluster, R.H. | 1 |
| 70***01 | Lens, Rear Combination | 1 |
C2-4-2 Alternator Mountings, , 1006-6t
| 02***92 | Washer | 1 |
| 02***24 | Lever, Alternator Adjusting | 1 |
| 02***94 | Bracket, Mounting | 1 |
C2-3-1 Alternator
| 02***43 | Pulley, Alternator | 1 |
| 71***06 | Kit-Bearing, Slip Ring End | 1 |
| 71***07 | Ring, Slip | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-5-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-4-2 Alternator Mountings, , 145t/160t
| 02***92 | Washer | 1 |
| 02***24 | Lever, Alternator Adjusting | 1 |
| 02***94 | Bracket, Mounting | 1 |
C3-3-1 Light, Head, Right Hand Dip
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 24***05 | Grommet | 2 |
C3-2-9 Heater Assembly
| 14***6Z | Washer, M6 | 14 |
| 47***05 | Screw | 14 |
| 47***00 | Heater, Assembly; Use 47***00, San 03904 | 1 |
C3-2-2 Air Conditioning, Intake
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 2 |
| 32***00 | Filter, Air | 1 |
C3-2-5 Air Conditioning, Assembly
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***1Z | Nut, M5-8 | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
C3-2-3 Heater, Installation
| 13***5Z | Bolt | 5 |
| 13***1Z | Nut, M5-8 | 2 |
| 13***03 | Nut | 2 |
C3-1-12 Fuse Box & Relays
| 13***01 | Nut, M5 | 4 |
| 13***10 | Capscrew | 4 |
| 47***43 | Bracket, Fuse Box | 1 |
C3-1-18 Instrument Panel
| 12***68 | Bracket | 2 |
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
C3-4-1 Air Conditioning, Intake
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 2 |
| 32***00 | Filter, Carbon, Cab Intake | 1 |
C3-1-5 Washer Kit, Windscreen
| 13***5Z | Bolt | 2 |
| 24***03 | Grommet | 2 |
| 47***03 | Grommet | 2 |
C3-1-13 Installation, Tachograph
| 13***3Z | Nut, M20 | 3 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 14***06 | Washer | 3 |
C3-1-3 Switch, Draft Control
| 47***00 | Panel, Draft Control, Panel, Draft Control; For Components See Frame C3-1-3. Knobs To Be Fitted After Bolting To Main Panel | 1 |
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
C3-1-6 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-1-1 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***42 | Panel, Instrument; Use 47***49 X 1 + 47***00 X 3 | 1 |
C3-2-4 Heater Assembly
| 14***5Z | Washer, M5; Replaces 69***59 | 6 |
| 47***00 | Heater, Assembly, 12 Volt | 1 |
| 47***01 | Motor, & Blower Assembly | 1 |
C3-1-16 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***54 | Panel, Dash/Instrument; For Use With Speedo. Use Panel 47***64 With 1 X 81***78 + 1 X 81***76 + 4 X 82***11 | 1 |
C3-2-6 Air Conditioning, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Bolt | 5 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
C3-2-8 Air Conditioning, Assembly
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 14***6Z | Washer, M6 | 21 |
| 47***03 | O Ring | 1 |
C3-1-14 Control Panel, Without Rear Hitch
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 47***07 | Console, Side Panel | 1 |
| 47***09 | Switch, Plate | 1 |
C3-1-2 Control Panel, With Rear Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 13***3Z | Nut | 3 |
C3-1-8 Battery & Fittings
| 13***5Z | Bolt | 7 |
| 13***1Z | Nut, M8 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-1-15 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***49 | Panel, Dash/Instrument | 1 |
C3-2-7 Heater, Installation
| 13***5Z | Bolt | 5 |
| 13***1Z | Nut, M5-8 | 2 |
| 13***03 | Nut | 2 |
C3-2-1 Air Conditioning, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut | 1 |
C3-1-4 Wash/Wipe, Front Screen
| 13***1Z | Setscrew, M6 X 12mm Long | 3 |
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C3-1-17 Fuse Box & Relays
| 13***01 | Nut, M5 | 1 |
| 13***10 | Capscrew | 2 |
| 47***43 | Bracket, Fuse Box | 1 |
C3-1-11 Instrument Cluster
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C3-1-7 Light, Working
| 70***03 | Spring | 1 |
| 70***00 | Light, Front Working | 0 |
| 70***01 | Gasket | 1 |
C3-1-10 Light, Working, Optional
| 70***00 | Light, Working | 1 |
| 70***00 | Light, Working | 1 |
| 72***61 | Bulb, 12v-55w H3 | 1 |
C3-1-9 Switch, Column
| 13***05 | Screw | 2 |
| 70***00 | Switch, Column | 1 |
| 70***01 | Column, Switch Cap | 1 |
D Controls-Machine, Engine & Steering
D1-1-6 Clutch & Actuation, Circuit
| 47***06 | Hose, Armoured | 1 |
| 47***08 | Nut, Thin M12 X 1.0 Pitch | 2 |
| 47***00 | Pipe, Master Cylinder | 1 |
D1-1-2 Controls, Linkage, Range Gearbox
| 47***01 | Boss, Pivot | 1 |
| 47***00 | Link, Connecting | 1 |
| 47***00 | Connector, Gear Change; Cwe,Then 47***96 San5538 10/4/95 Gk | 1 |
D1-1-3 Controls, Linkage, Speed Gearbox
| 47***00 | Connector, Gear Change; Cwe,Then 47***96 San5538 10/4/95 Gk | 1 |
| 47***00 | Ball, Joint 20mm Dia | 1 |
| 47***00 | Link, Connecting; Cwe,Then 47***95 Link.San5538 10/4/95 Gk | 1 |
D1-2-4 Control, Pick-Up Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
D1-2-3 Control, Lever, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***7Z | Capscrew, Socket Head | 2 |
D1-1-1 Gear Change
| 12***04 | Knob | 2 |
| 13***5Z | Bolt | 8 |
| 13***2Z | Nut | 2 |
D1-1-5 Clutch, Master Cylinder
| 14***04 | Washer, Copper | 1 |
| 15***00 | Reservoir, & Cap Assembly | 1 |
| 15***01 | Reservoir, Cap | 1 |
D1-2-5 Control, Hitch Release
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 2 |
D1-1-4 Control, Pedal Assembly
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 1 |
| 13***1Z | Nut, M8 | 2 |
D1-2-1 Control Linkage, 2 Spool Valve
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-2-2 Control Linkage, 4 Spool Valve
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 8 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-1-7 Controls,Linkage Kit, ,Retrofit Gearbox,, Range
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***9Z | Capscrew, M8 X 90mm | 1 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 12***02 | Knob, Controls, Yellow | 1 |
D2-1-2 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***1Z | Nut | 2 |
E Hydraulics Including Steering
E1-1-4 Circuit, Rear Hitch
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 3 |
E1-1-6 Circuit, Suspension
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 24***05 | O Ring | 1 |
| 24***06 | O Ring | 2 |
E1-2-3 Circuit, Transmission, Rear Power Take Off
| 13***8Z | Bolt, M8 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***9Z | Capscrew, M8 X 90mm | 2 |
E1-1-5 Circuit, Steering
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-2-6 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***06 | O Ring | 4 |
E1-1-12 Circuit, Rear Hitch
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
E1-1-21 Circuit, Steering
| 13***5Z | Bolt, M12x20 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-1-19 Circuit, Front Hitch
| 13***7Z | Bolt | 2 |
| 13***2Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
E1-2-8 Circuit, Transmission, Front Power Take Off
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt | 1 |
| 24***05 | O Ring | 2 |
E1-1-7 Circuit, Auxiliary, Free Flow Return, With Rear Hitch
| 22***51 | Circlip | 2 |
| 24***06 | O Ring | 2 |
| 45***00 | Coupling, Quick Release | 1 |
E1-2-1 Circuit, Transmission, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 24***05 | O Ring | 1 |
| 24***06 | O Ring | 3 |
E1-1-11 Circuit, Steering
| 13***5Z | Bolt, M12x20 | 2 |
| 13***8Z | Bolt, M10 X 30mm | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
E1-1-15 Hose & Pipework, 4 Spool, Without Rear Hitch
| 22***51 | Circlip | 12 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 1 |
E1-1-18 Circuit, Auxiliary, Front
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 2 |
| 22***51 | Circlip | 4 |
E1-1-20 Circuit, Rear Hitch
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 3 |
E1-1-10 Circuit, Front Hitch
| 24***05 | O Ring | 2 |
| 24***05 | O Ring | 3 |
| 25***00 | Valve, Cut Off | 1 |
E1-1-2 Hose & Pipework, 2 Spool, With Rear Hitch
| 22***51 | Circlip | 8 |
| 24***07 | O Ring | 1 |
| 24***06 | O Ring | 2 |
E1-1-17 Circuit, Auxiliary, Free Flow Return, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 22***51 | Circlip | 2 |
E1-3-1 Circuit, Flow Divider, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-2-2 Circuit, Transmission, 4wd & Differential Lock
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***05 | O Ring | 3 |
| 24***07 | O Ring | 1 |
E1-1-8 Circuit, Front Hitch
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 24***05 | O Ring | 3 |
| 24***05 | O Ring | 11 |
E1-1-1 Circuit, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 22***08 | Clip, Jubilee | 2 |
| 22***09 | Clip, Jubilee | 2 |
E1-2-4 Circuit, Transmission, Front Power Take Off
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***7Z | Bolt | 2 |
E1-2-10 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***03 | O Ring | 1 |
E1-2-9 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***06 | O Ring | 4 |
E1-1-14 Circuit, Front Bumper
| 13***9Z | Screw, M10x35mm | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
E1-1-13 Circuit, Auxiliary, Free Flow Return, Without Rear Hitch
| 22***51 | Circlip | 2 |
| 24***06 | O Ring | 2 |
| 45***00 | Coupling, Quick Release | 1 |
E1-1-16 Hose & Pipework, 2 Spool, Without Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***9Z | Screw, M10x35mm | 3 |
| 13***3Z | Nut, Lock, M10 | 4 |
E1-2-7 Circuit, Transmission, Neutral, Front Section
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 24***06 | O Ring | 8 |
| 30***00 | Cooler, Combined Hydraulic, Transmission | 1 |
E1-1-3 Hose & Pipework, 4 Spool, With Rear Hitch
| 22***51 | Circlip | 12 |
| 24***07 | O Ring | 2 |
| 24***05 | O Ring | 3 |
E1-2-5 Circuit, Gearbox, Balance Pipework
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
E1-1-9 Circuit, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 17***03 | Cap, Female | 2 |
| 22***08 | Clip, Jubilee | 2 |
E2-3-1 Pump, Steer & Suspension
| 13***7Z | Capscrew, Socket Head | 2 |
| 20***06 | Cap | 1 |
| 20***08 | Cap | 1 |
E2-1-2 Pump, Steer & Suspension
| 20***06 | Washer, Spring | 4 |
| 20***03 | Bolt, 3/8"Unc 162 | 4 |
| 20***04 | O Ring | 1 |
E2-2-1 Pump, Gearbox Low Pressure, & External Hydraulics
| 13***8Z | Bolt, M12 X 30 | 2 |
| 20***03 | Key; Replaced By 20/20***06, See San05154 | 1 |
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
E2-1-1 Pump, Steer & Suspension
| 13***07 | Capscrew | 2 |
| 20***02 | Dowel | 6 |
| 20***06 | Washer, Spring | 4 |
E3-2-1 Valve, Rear Hitch
| 13***8Z | Bolt, M8 X 80mm Long | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***8Z | Capscrew | 3 |
E3-4-1 Filter, Hydraulic, Tank Mounted
| 58***12 | Element, Filter, 10 Micron | 1 |
| 58***02 | O Ring | 1 |
| 58***04 | Seal | 1 |
E3-4-3 Optional Fit, Transmission Filter, Temperature Cut Out Switch Kit
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 0 |
| 24***06 | O Ring | 1 |
E3-1-3 Valve, Section, 4 Position, With Float
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 1 |
E3-1-4 Valve, Main Relief
| 25***19 | Kit-Seal, Relief Valve | 1 |
| 25***03 | Valve, Mrv; For Details See Frame E3-1-4. Set Releif Valve Pressure When Installed. See Service Manual For Procedure., Valve, Mrv, Valve, Mrv; For Details See Index E3. Set Releif Valve Pressure When Installed, See Service Workshop Manual For Proceedure. | 1 |
E3-1-1 Valve, Components
| 13***9Z | Screw, M10x35mm | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 24***07 | O Ring | 1 |
E3-5-1 Valve, Flow Regulator, Diverter
| 25***02 | Coil, 12v | 1 |
| 25***00 | Valve, Priority, Flow Divider | 1 |
| 25***01 | Valve, Relief, Cartridge | 1 |
E3-3-1 Valve, Solenoid
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***9Z | Capscrew, M8 X 90mm | 2 |
E3-2-2 Valve, Rear Hitch
| 25***00 | Valve, Rear Hitch | 1 |
| 25***01 | Kit-Solenoid | 1 |
| 25***02 | Kit-Seal | 1 |
E3-1-2 Valve, Section, 3 Position, Single/Double Acting
| 25***16 | O Ring | 1 |
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E3-4-2 Filter, Transmission
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element | 1 |
| 32***02 | Switch, Pressure Bypass, C/W Cartridge | 1 |
E4-2-1 Ram, Suspension, Option
| 47***03 | Plug | 1 |
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
E4-1-4 Ram, Suspension
| 47***00 | Ram, Single Acting, Suspension 40mm Dia | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Cylinder | 1 |
E4-1-1 Ram, Front Hitch
| 47***00 | Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod; For Parts See Index E4. Plug Un-Used Ports With 81***18 X 2, Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod; 4 Ports On Cylinder. Blank Un-Used Ports With 81***18 X 2, Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod | 2 |
| 47***01 | Kit-Seal, 60mm Cyl X 30mm Rod | 1 |
| 47***02 | Nut, End | 1 |
E4-1-5 Ram, Rear Hitch, Cat Iii, Option
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***03 | Plug | 1 |
E4-1-2 Ram, Rear Hitch, Cat Ii
| 47***00 | Ram, Single Acting, 75mm Plunger Type, Ram, Single Acting, 75mm Plunger Type; Cat 2-3 Hitch. For Parts See Frame E4-1-2 | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Rod, Assembly | 1 |
E4-1-3 Ram, Rear Hitch, Cat Iii
| 47***00 | Ram, Single Acting, 80mm Plunger Type; Cat 3 Hitch. For Parts See Freme E4-1-3, Ram, Single Acting, 80mm Plunger Type | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Rod, Assembly | 1 |
F Axles, Wheels & Transmission
F1-1-2 Axle Drive Head
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
F1-1-10 F1-1-10
F1-1-7 Differential, Components, 'Maxtrac'
| 44***08 | Pin, Trunnion | 1 |
| 44***09 | Housing, Differential; Mss Use 44***00 X 1, + 21***16 X 1,, + 13***15 X 8. San 04918 | 1 |
| 44***00 | Differential, Gear Kit | 1 |
F1-1-3 Hub & Components
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
F1-1-5 Differential, Components, No-Spin
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
| 45***00 | Differential, Case Assembly | 1 |
F1-1-1 Axle Assembly, Front
| 13***9Z | Screw, M10x35mm | 10 |
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
F1-1-6 Remote Greasing
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 47***00 | Pivot, Remote Greasing, Assembly | 1 |
| 47***01 | Adapter, Self Tapping; Nsp. Not Available Separately, Supply Complete Assembly 47***00 Only | 1 |
F2-1-2 Axle Drive Head
| 04***72 | Switch, Switch; Differential Lock Switch. Use 70***00 + Bridging Harness 71***00 | 1 |
| 13***17 | Bolt | 2 |
| 22***60 | Circlip | 1 |
F2-1-4 Hub & Components
| 13***7Z | Bolt, M10x25 | 4 |
| 13***09 | Bolt | 12 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-1-1 Axle Assembly, Rear
| 13***09 | Bolt | 14 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***03 | Nut | 4 |
F2-1-10 Hub & Components Kit, Upgrade 3 To 4 Pin
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 8 |
| 45***08 | Pad, Thrust | 2 |
F2-1-3 Differential, Assembly
| 13***8Z | Bolt, M10x80 | 8 |
| 45***02 | Pin, Trunnion; Use 45***03 | 2 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
F3-1-5 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, 20.00 X 30.5 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-1-4 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F3-1-1 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F3-2-2 Propshafts, Axle Drive
| 11***25 | Strap | 6 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
F3-1-6 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, 20.00 X 30.5 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-1-3 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W15l X 24 | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-2-1 Propshafts
F3-1-7 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F3-1-2 Axle Lock Stops
| 47***00 | Kit, Axle-Lockstops | 1 |
| 47***01 | Plate, Lock Stop Keeper | 1 |
| 47***02 | Stop, Lock, 30mm Long Head, ( Stamped - '68') | 2 |
F5-1-2 Gearbox, Power Take Off, 2 Speed, Twin Take Off
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Bolt, M10 X 35 | 6 |
| 45***00 | Gearbox, Power Take Off, (Double Take Off) | 1 |
F5-1-9 Clutch Servo
| 15***08 | Screw, Bleed, 3/8"Unf | 1 |
| 15***26 | Screw Bleed | 1 |
| 47***00 | Clutch, Servo | 1 |
F5-1-7 Clutch Assembly, Power Take Off, Front
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 14***14 | Washer | 1 |
F5-1-6 Clutch Assembly, Power Take Off, Rear
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 14***14 | Washer | 1 |
F5-1-8 Clutch & Actuation
| 13***06 | Bolt | 8 |
| 13***6Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
F5-1-5 Clutch Release, Selector Mechanism, Power Take Off Gearbox
| 13***7Z | Bolt, M10x25 | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***35 | Screw; Now Use 44***10 | 6 |
F5-1-4 Gear Group, Output, Intermediate, Power Take Off Gearbox
| 13***5Z | Screw, Set, M8 X 20 | 5 |
| 22***62 | Circlip, Internal | 1 |
| 22***85 | Circlip, Internal | 1 |
F5-1-1 Gearbox, Power Take Off, 2 Speed, Single Take Off
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Screw, M10 X 35 | 6 |
| 45***46 | Cover, End | 1 |
F5-1-3 Gear Group, Input & Idler, Power Take Off Gearbox
| 13***7Z | Bolt, M10x25 | 6 |
| 22***58 | Circlip, Internal | 1 |
| 22***94 | Circlip, Internal | 1 |
F6-1-4 Gearbox, 6 Speed, Mainshaft Assembly, Y04041
| 45***01 | Gear, Output 31t | 1 |
| 45***06 | Kit, Circlip | 3 |
| 45***42 | Shaft, Assembly | 1 |
F6-1-5 Gearbox, 6 Speed, Input Shaft Assembly, Y04041
| 45***62 | Shaft, Input, 6th Gear | 1 |
| 45***68 | Bearing, Roller | 1 |
| 45***73 | Circlip | 1 |
F6-1-9 Gearbox, 6 Speed, Remote Control Assy, Y04041
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F6-1-2 Gearbox, 6 Speed, Repair Kits, Y04041
| 45***00 | Kit, Basic Overhaul | 1 |
| 45***01 | Kit, 1st/2nd Synchro; Use 45***62, San 03901 | 1 |
| 45***02 | Kit, 3rd/4th Synchro; Use 45***63, San 03901 | 1 |
F6-2-4 Gearbox, 6 Speed, Mainshaft Assembly, Y04141
| 45***06 | Kit, Circlip | 2 |
| 45***44 | Gear, 3rd | 1 |
| 45***45 | Bearing, Needle Roller | 2 |
F6-2-11 Gearbox, 5 Speed, Remote Control Assy, Y04141
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
F6-1-8 Gearbox, 6 Speed, Selector Controls, Y04041
| 45***99 | Block, Selector | 1 |
| 45***21 | Gear, Selector Assembly | 1 |
| 45***22 | Pin | 1 |
F6-1-3 Gearbox, 6 Speed, Case Assemblies, Y04041
| 45***10 | Housing, Assembly, Rear | 1 |
| 45***11 | Housing, Rear; Nla Use 45***10 For Mk3 To; M635199, 45***03 For Mk4 From; M635200 | 1 |
| 45***12 | Bush, Selector Shaft | 2 |
F6-2-8 Gearbox, 6 Speed, Selector Controls, Y04141
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F6-2-10 Gearbox, 6 Speed, Rear Housing, Y04141
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 2 |
F6-2-2 Gearbox, 6 Speed, Repair Kits Y04141
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F6-1-1 Gearbox, 6 Speed, Installation, Y04041
| 12***02 | Plate, Compression | 2 |
| 13***7Z | Bolt, M10x25 | 8 |
| 13***9Z | Screw, M10x35mm | 21 |
F6-2-5 Gearbox, 6 Speed, Input Shaft Assembly, Y04141
| 45***49 | Plunger | 1 |
| 45***50 | Roller, 8mm | 1 |
| 45***51 | Spring, Synchro | 1 |
F6-2-9 Gearbox, 6 Speed, Remote Control Assy, Y04141
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F6-2-7 Gearbox, 6 Speed, Front Cover Assembly, Y04141
| 45***28 | Washer, Spring | 5 |
| 45***97 | Seal, Oil | 1 |
| 45***98 | Screw, M10 | 5 |
F6-2-3 Gearbox, 6 Speed, Case Assemblies, Y04141
| 45***12 | Bush, Selector Shaft | 2 |
| 45***13 | Plug, Cup | 2 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
F6-1-10 Gearbox, 6 Speed, Rear Housing, Y04041
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 2 |
F6-1-6 Gearbox, 6 Speed, Counter Shaft Assy, Y04041
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F6-1-7 Gearbox, 6 Speed, Front Cover Assembly, Y04041
| 45***28 | Washer, Spring | 5 |
| 45***97 | Seal, Oil | 1 |
| 45***98 | Screw, M10 | 5 |
F6-2-1 Gearbox, 6 Speed, Installation, Y04141
| 12***02 | Plate, Compression | 2 |
| 13***7Z | Bolt, M10x25 | 8 |
| 13***9Z | Screw, M10x35mm | 21 |
F6-2-6 Gearbox, 6 Speed, Counter Shaft Assy, Y04141
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F7-1-5 Shaft, Output Group, 4 Wheel Drive, Spicer
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F7-1-6 Gear Change, Spicer
| 13***5Z | Bolt | 4 |
| 44***20 | Retainer, Spring | 1 |
| 44***21 | Gaiter, Gear Change | 1 |
F7-1-12 Dipstick & Filler,, Transmission,, Replacement Rangebox
| 02***03 | Olive | 1 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 14***26 | Washer, Seal | 1 |
F7-1-4 Shaft Group, Output, Spicer
| 13***2Z | Bolt | 4 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F7-1-9 Gearbox Housing,, Eaton Synchro.Range, Box
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
F7-1-11 Shaft,Input,, And Reverser Gear., Eaton Synchro.Rangebox Replacement
| 45***02 | Gear, Input 40t | 1 |
| 45***49 | Plunger | 3 |
| 45***51 | Spring, Synchro | 3 |
F7-1-3 Shaft, Input, And Reverse Gear, Synchro Rangebox ( Spicer )
| 45***07 | Hub, Sleeve | 1 |
| 45***00 | Gear, Assembly Synchro; Replaced By N.L.A. Use 45***00 0r 45***00, + Kit 99***88. See San 12610 | 1 |
| 45***01 | Shaft, Main | 1 |
F7-1-1 Gearbox,, Spicer
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F7-1-2 Gearbox Housing,, Spicer
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
F7-1-10 Shaft Group,Output, Eaton Synchro.Range, Box Replacement
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
| 45***49 | Plunger | 3 |
F7-1-7 Dipstick Tube, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 15***00 | Nut, Sealastic | 1 |
| 22***04 | Clip, Jubilee | 2 |
F7-2-1 Shaft, Output Group, 4 Wheel Drive, Option
| 14***14 | Washer | 1 |
| 22***63 | Circlip; Replaces 370a0100z | 1 |
| 22***71 | Circlip | 1 |
F7-1-8 Gearbox,, Eaton Synchro.Range, Box.
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F7-1-13 Gear Change,Manual, Rangebox,Retrofit
| 13***5Z | Bolt | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***23 | Pin | 1 |
F8-1-2 Gearbox Transfer, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F8-2-2 Propshaft, Rear Power Take Off
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F8-1-1 Installation, Power Take Off, Front
| 11***25 | Strap | 2 |
| 13***0Z | Bolt, M10 X 40 | 16 |
| 13***1Z | Bolt, M10 X 45mm | 3 |
F8-2-1 Installation, Power Take Off, Rear, With Hitch
| 14***14 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 44***15 | Breather | 1 |
F8-1-3 Guard, Power Take Off, Front
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 2 |
F8-3-1 Installation, Power Take Off, Rear, Without Hitch
| 14***14 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 44***15 | Breather | 1 |
F8-2-6 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F8-1-6 Gearbox Transfer, Front ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F8-1-7 Installation, Power Take Off, Front ( Single )
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 2 |
F8-2-4 Shaft, Adapter
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F8-1-4 Guard, Power Take Off, Front
| 13***3Z | Screw, M8 X 16 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 47***08 | Guard, Rear Section | 1 |
F8-2-5 Guard, Static, Power Take Off, Rear - French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F8-2-3 Guard, Power Take Off, Rear
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 3 |
F9-1-1 Transmission, Gearbox Assembly
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***3Z | Bolt, M12 X 55 | 4 |
| 13***3Z | Bolt, M12 X 130 | 4 |
G Brakes
G1-2-4 Valve, Brake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
G1-2-23 Handbrake Control, 3 Position
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-2-15 Circuit, Air Brakes, Chassis
| 15***00 | Adapter, 'T' | 4 |
| 15***00 | Valve, Pressure Reducing | 1 |
| 47***03 | Pipe, Air Intake | 1 |
G1-3-7 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Single Line | 1 |
| 45***01 | Kit-Repair | 1 |
| 45***02 | Cover, Dust | 1 |
G1-2-7 Valve, Auto-Drain
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***01 | Kit-Repair, Auto Drain Valve | 1 |
G1-3-1 Installation Circuit, Single Line, Hydraulic Trailer Braking, With Hitch
| 13***6Z | Bolt, M8 X 70 | 2 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
G1-2-19 Handbrake Control, 3 Position
| 15***00 | Valve, Handbrake | 1 |
| 15***01 | Cover, Assembly | 1 |
| 15***02 | Kit, Repair | 1 |
G1-2-13 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Brake Threshold | 1 |
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 3 |
G1-2-14 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Brake Threshold | 2 |
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 4 |
G1-6-1 Circuit, Air Brakes, Cab, 3 Position Handbrake Control
| 15***00 | Valve, Handbrake | 1 |
| 15***00 | Valve, Brake | 1 |
| 20***07 | Tie, Cable - 100mm Long | 1 |
G1-3-6 Installation Circuit, Air Trailer Brakes
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Nut | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G1-4-1 Circuit, Twin Air Guage, Installation
| 24***02 | Grommet | 1 |
| 64***00 | Pipe, Air 3/16" | 0 |
| 64***01 | Tube, Air, 5 Metre Length | 0 |
G1-3-2 Valve, Brake, Hydraulic Trailer
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Trailer Brake Valve | 1 |
| 25***02 | Seal, Back-Up Ring | 1 |
G1-3-8 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-2-12 Coupling, Trailer Brake
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, 'C' Type, Female, With Shut Off; Use 45/91***00 Changed @ M636508, San 04954 | 1 |
| 45***00 | Coupling, 'C' Type, Male, With Shut Off; Use 45/91***00 Changed @ M636508, San 04954 | 1 |
G1-2-18 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-1-4 Actuator, Air
| 13***2Z | Nut | 2 |
| 47***21 | Piston, Spring Actuator | 1 |
| 47***22 | Capscrew | 8 |
G1-7-1 Anti-Freeze Pump, Air Brake Circuit
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
G1-2-21 Valve, Pressure Reducing
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 15***00 | Valve, Pressure Reducing | 1 |
G1-2-16 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-5-1 Circuit, Air Brakes, Cab
| 15***00 | Valve, Handbrake | 1 |
| 15***00 | Valve, Brake | 1 |
| 24***05 | Grommet | 1 |
G1-2-17 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 15***01 | Kit-Repair, Inverse Relay Valve | 1 |
G1-3-4 Installation Circuit, Single Line, Hydraulic Trailer Braking, Without Hitch
| 13***6Z | Bolt, M8 X 70 | 2 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
G1-2-20 Valve, Brake Threshold
| 13***7Z | Bolt, M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 15***00 | Valve, Brake Threshold | 1 |
G1-2-5 Handbrake Control, 2 Position, Uk Only
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
| 15***01 | Cover, Assembly, Top | 1 |
| 15***02 | Knob | 1 |
G1-2-3 Circuit, Air Brakes, Chassis
| 15***00 | Adapter, 'T' | 3 |
| 47***03 | Pipe, Air Intake | 1 |
| 47***04 | Pipe, Rigid 5/8" | 1 |
G1-9-1 Valve, Trailer Brake, Italian
| 15***00 | Valve, Trailer Brake | 1 |
| 15***01 | Kit-Repair | 1 |
G1-2-22 Valve, Brake Threshold
| 15***00 | Valve, Brake Threshold | 1 |
| 99***04 | Kit-Repair, Threshold Valve | 1 |
G1-10-1 Valve, Unloader, Italian
| 15***00 | Valve, Unloader, C/W 10 Bar Rv | 1 |
| 15***01 | Kit-Repair | 1 |
G1-8-1 Coupling, Trailer Brake, Italy
| 13***9Z | Screw, M10x35mm | 5 |
| 13***3Z | Nut, Lock, M10 | 5 |
| 45***00 | Coupling, Twin | 1 |
G1-2-8 Actuator, Air/Hydraulic
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 15***00 | Actuator, Air/Hydraulic | 2 |
| 15***01 | Kit-Repair, Air/Hydraulic Actuator | 1 |
G1-2-1 Circuit, Air Brakes, Cab, Uk Only
| 13***03 | Bolt | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
G1-2-10 Valve, Check
| 15***00 | Valve, Non-Return | 1 |
| 15***01 | Kit-Repair, Non-Return Valve | 1 |
G1-2-6 Valve, Unloader
| 15***00 | Valve, Unloader | 1 |
| 15***01 | Kit-Repair, Unloader Valve | 1 |
G1-2-2 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 4 |
| 15***00 | Valve, Circuit Protection; Use 15/91***00, San 04551 (15/90***00 Used Until M636217) | 1 |
G1-1-2 Brake Caliper, Rear
| 45***00 | Brake, Caliper Assembly | 2 |
| 45***01 | Brake, Pad & Pin Kit, Complete Axle; Was 45***05 X 2 + 47***02 X 1.Now Use Kit, 45***01 See San 07537. | 1 |
| 45***02 | Kit-Seal | 1 |
G1-7-2 Pump, Antifreeze, Air Trailer Brakes
| 47***00 | Pump, Antifreeze | 1 |
| 47***01 | Kit-Repair | 1 |
| 47***02 | Reservoir | 1 |
G1-1-1 Brake Caliper, Front
| 45***00 | Brake, Caliper Assembly | 2 |
| 45***01 | Brake, Pad & Pin Kit, Complete Axle; Use 45***05 X 2 + 47***06 X 1, San 04784 | 1 |
| 45***02 | Kit-Seal | 1 |
G1-2-9 Valve, Trailer Brake
| 15***00 | Valve, Trailer Brake | 1 |
| 15***01 | Kit-Repair, Supply Dump Valve | 1 |
| 15***02 | Kit-Repair, Trailer Control V/V | 1 |
G1-2-11 Coupling, Trailer Brake
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, Palm With Seal - Red | 1 |
| 45***01 | Cap, Dust, Red | 1 |
G1-2-24 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 99***01 | Kit-Repair, Palm Coupling, Red/Yellow | 1 |
G1-1-3 Brake, Parking
| 21***14 | Pin, Split/Cotter | 4 |
| 47***00 | Brake, Assembly, Park; Use 47***00 X 1 + 47***32 X 1, San 04829 | 1 |
| 47***01 | Plug | 1 |
G1-3-5 Clamps, Brake Circuit
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Bolt, M10x25 | 1 |
G1-3-3 Clamps, Brake Circuit
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
H Steering
H1-1-5 Steering Column
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***0Z | Bolt, M8x40 | 2 |
H1-1-3 Steering Shaft, Intermediate
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 47***00 | Shaft, Intermediate Steer, Telescopic | 1 |
H1-1-1 Steering, Installation
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
H1-1-4 Motor, Steering
| 13***7Z | Bolt, M10x25 | 4 |
| 13***7Z | Bolt | 8 |
| 47***00 | Gearbox, Steering; Use 47***00 | 1 |
H1-1-2 Steering Shaft, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
S Suspension
S1-2-1 Suspension, Rear, Hydraulics
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
S1-2-3 Valve, Charge
| 25***00 | Valve, Charge | 1 |
| 25***01 | Kit-Seal | 1 |
| 25***02 | Cartridge | 1 |
S1-2-4 Suspension, Rear, Rebound Straps
| 13***2Z | Bolt | 2 |
| 13***3Z | Bolt, M20 X 2.5 X 130mm | 2 |
| 13***3Z | Nut, M20 | 4 |
S1-1-1 Suspension, Front
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt, M10x80 | 4 |
S1-2-2 Suspension, Rear, Linkages
| 13***8Z | Bolt, M12 X 30 | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 8 |
| 13***9Z | Bolt, M10x90mm | 8 |
T Engine
T1-5-3 Fans, Pulleys, & Fan Belt, Yb Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-6-2 Timing Case, Auxilia, Ry Drive, Yb Build
| 02***96 | Key | 2 |
| 02***08 | Dowel | 2 |
| 02***52 | Circlip | 1 |
T1-5-4 Fans, Pulleys, & Fan Belt, Optional, Yb Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-4-8 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***29 | Circlip | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T1-6-1 Timing Case, Camshaf, T & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-1-7 Engine, Complete, Yb Build
| 01***00 | Engine, 160t, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 160t, Turbo, C/W 229cc Compressor | 1 |
T1-1-2 Engine, Complete, Yb Build
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
T1-5-6 Fans,Pulleys,Fan Bel, T,Yb Build,1006-6t
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-5-5 Fans, Pulleys, & Fan Belts, Fixed Fan, 1.25 : 1 Ratio Australian Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-7-1 Flywheel & Housing,, Yb Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 12 |
T1-3-1 Block Assembly, Ya Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ya Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 6 |
T1-8-1 Engine Mountings, Yb, Build
| 02***42 | Bracket | 1 |
| 02***43 | Bracket | 1 |
| 02***83 | Stud | 4 |
T1-2-6 Engine, Short, Yb Build
| 02***62 | Engine, Short | 1 |
T1-2-1 Engine, Short, Ya Build
| 02***60 | Engine, Short, 1006.6 | 1 |
T1-1-6 Engine, Complete, Yb Build
| 01***00 | Engine, 145t,Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 145t, Turbo, C/W 229cc Compressor | 1 |
T1-5-7 Fans Pulleys, & Fan Belt, Ya Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-5-6 Fans,Pulleys,Fan Bel, T,Yb Build,145t/150t
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-6-3 Timing Case, Camshaft & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-1-1 Engine, Complete, Ya Build
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 159cc Compressor | 1 |
T1-5-2 Fans, Pulleys, & Fan Belt, Optional, Ya Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-1-4 Engine, Complete, Yb Build
| 01***00 | Engine, 1006-6t, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 229cc Compressor | 1 |
T1-1-3 Engine, Complete, Ya Build
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 229cc Compressor | 1 |
T1-6-1 Timing Case, Camshaf, T & Gears, Ya Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-5-1 Fans, Pulleys, & Fan Belt, Ya Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-3-2 Block Assembly, Yb Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-6-2 Timing Case, Auxilia, Ry Drive, Ya Build
| 02***96 | Key | 2 |
| 02***08 | Dowel | 2 |
| 02***52 | Circlip | 1 |
T1-2-2 Engine, Short, Yb Build
| 02***61 | Engine, Short, 1006.6t | 1 |
| 02***63 | Engine, Short, 1006-6t,Turbo | 1 |
T1-4-6 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***29 | Circlip | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T1-7-1 Flywheel & Housing,, Ya Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 12 |
T1-8-1 Engine Mountings, Ya, Build
| 02***42 | Bracket | 1 |
| 02***43 | Bracket | 1 |
| 02***83 | Stud | 4 |
T1-2-8 Engine, Short, Yb Build
| 02***64 | Engine, Short | 1 |
T2-4-1 Lifting Plates, Engi, Ne, Ya Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Yb
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-4-1 Lifting Plates, Engi, Ne, Yb Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
T2-1-4 Cylinder Head, Yb Bu, Ild, 145t/160t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-3-1 Rocker Cover, Yb Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***39 | Cap, Oil Filler | 1 |
T2-3-1 Rocker Cover, Ya Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***39 | Cap, Oil Filler | 1 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Ya
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-1-2 Cylinder Head, Yb Bu, Ild, 1006-6t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-1-2 Cylinder Head, Yb Bu, Ild, 145t/160t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-1-1 Cylinder Head, Ya Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-1-4 Cylinder Head, Yb Bu, Ild, 1006-6t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T3-1-2 Manifold, Induction, Yb Build
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
| 02***73 | Hose, Induction | 1 |
T3-3-1 Filter, Air, Ya Build
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-4-1 Exhaust System, Ya Build
| 02***19 | Gasket | 1 |
| 02***03 | Stud | 3 |
| 02***61 | Nut | 3 |
T3-1-1 Manifold, Induction, Ya Build
| 02***10 | Plug | 1 |
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
T3-2-2 Manifold, Exhaust, Yb Build
| 02***04 | Gasket | 2 |
| 02***15 | Gasket | 1 |
| 02***49 | Manifold, Exhaust | 1 |
T3-3-2 Filter, Air, Yb Build
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-4-2 Exhaust System, Yb Build
| 02***16 | Nut | 6 |
| 13***8Z | Screw, M8x30 | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
T3-2-1 Manifold, Exhaust, Ya Build
| 02***04 | Gasket | 2 |
| 02***43 | Manifold, Exhaust | 1 |
| 02***15 | Gasket | 1 |
T4-3-1 Radiator Fittings &, Mountings, Yb Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
T4-4-1 Radiator & Hoses, Ya, Build
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 13***3Z | Screw, M8 X 16 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Ya
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Yb
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-1-1 Pump, Water, Yb Buil, D
| 02***82 | O Ring | 1 |
| 02***84 | Seal | 1 |
| 02***85 | Cover | 1 |
T4-1-1 Pump, Water, Ya Buil, D
| 02***82 | O Ring | 1 |
| 02***84 | Seal | 1 |
| 02***85 | Cover | 1 |
T4-4-1 Radiator & Hoses, Yb, Build
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 13***3Z | Screw, M8 X 16 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
T4-3-1 Radiator Fittings &, Mountings, Ya Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
T5-5-2 Cooler, Oil, & Pipework, Yb Build
| 02***08 | Spring | 1 |
| 02***16 | O Ring | 2 |
| 02***17 | O Ring | 4 |
T5-1-1 Sump, Oil & Fittings, , Yb Build
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***02 | Plug | 1 |
T5-4-2 Filter, Oil, Yb Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 02***96 | Gasket | 1 |
| 02***93 | Head, Oil Filter | 1 |
T5-1-1 Sump, Oil & Fittings, , Ya Build
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***02 | Plug | 1 |
T5-2-2 Pump, Oil, & Relief Valve, Yb Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-5-1 Cooler, Oil, & Pipework, Ya Build
| 02***08 | Spring | 1 |
| 02***16 | O Ring | 2 |
| 02***17 | O Ring | 4 |
T5-4-1 Filter, Oil, Ya Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***10 | Plug | 1 |
| 02***88 | Head, Oil Filter | 1 |
T5-2-1 Pump, Oil, & Relief Valve, Ya Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-3-1 Piston Cooling Jets, Yb Build
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
T6-2-6 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***05 | Seal | 6 |
| 02***10 | Spacer | 6 |
T6-5-2 Fuel Heater, & Fuel Feed Pipe, Yb Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 3 |
T6-1-7 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-1-6 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-1-1 Pump, Fuel Injection, Ya Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Ya Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 4 |
T6-4-2 Fuel Pipes, Tank To, Filter, Yb Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-7-1 Filter, Fuel, Ya Bui, Ld
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-3-6 Fuel Pipes, Injection Pump, Yb Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
T6-3-2 Fuel Pipes, Injection Pump, Yb Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 4 |
| 02***18 | Nut | 2 |
T6-7-1 Filter, Fuel, Yb Bui, Ld
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-4-1 Fuel Pipes, Tank To Filter, Standard, Ya Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-6-1 Filter, Fuel Sedimen, T, Ya Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-4-2 Fuel Pipes, Tank To, Filter, Optional, Ya
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-1-2 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-6-1 Filter, Fuel Sedimen, T, Yb Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-3-1 Fuel Pipes, Injection Pump, Ya Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 2 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Ya Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 3 |
T6-8-1 Pump, Fuel Lift, Yb, Build
| 02***72 | Plate, Keep | 2 |
| 02***94 | Gasket | 1 |
| 02***18 | Bolt | 4 |
T6-2-2 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 3 |
T6-8-1 Pump, Fuel Lift, Ya, Build
| 02***72 | Plate, Keep | 2 |
| 02***94 | Gasket | 1 |
| 02***18 | Bolt | 4 |
T7-5-1 Compressor, Installation, Air Conditioning
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
T7-4-1 Compressor Pipework,, Ya Build
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-3-2 Compressor, Air, 229cc
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***02 | Key, Woodruff | 1 |
T7-6-1 Compressor, Air Conditioning
| 26***05 | Kit-Seal, & Felt Ring Assembly | 1 |
| 26***06 | Ring, Snap | 1 |
| 47***00 | Compressor, Air Conditioning; Must Be Used With 2 Off 47***49 | 1 |
T7-4-2 Compressor Pipework, 229cc
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-3-1 Compressor, Air, Yb, Build
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***00 | Compressor | 1 |
T7-5-2 Compressor, Installation, Air Conditioning
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
T7-3-1 Compressor, Air, Ya, Build
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***00 | Compressor | 1 |
T7-4-1 Compressor Pipework,, Yb Build
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-1-1 Turbocharger, Yb Build
| 02***09 | Shaft, & Impellor Assembly | 1 |
| 02***12 | Kit-Repair, Turbocharger | 1 |
| 02***67 | Collar, Thrust | 1 |
T7-2-2 Turbo, Heatshield, Yb Build
| 02***77 | Shield, Heat | 1 |
| 02***78 | Spacer | 2 |
| 02***16 | Nut | 2 |
T7-5-3 Compressor, Installation, Air Conditioning
| 13***1Z | Bolt, M10 X 45mm | 1 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
T7-2-5 Turbo, Pipework, Yb Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
T7-2-1 Turbo, Pipework, Yb Build
| 02***84 | Hose, Oil Drain | 1 |
| 02***75 | Gasket | 1 |
| 02***80 | Gasket | 1 |
T8-2-3 Kit, Engine Overhaul, Yb Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
T8-1-1 Gasket Sets, Yb Buil, D
| 02***02 | Kit-Gasket, Top | 1 |
| 02***03 | Kit-Gasket, Bottom | 1 |
| 02***83 | Kit-Gasket, Top | 1 |
T8-2-1 Kit, Engine Overhaul
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
T8-1-1 Gasket Sets, Ya Buil, D
| 02***02 | Kit-Gasket, Top | 1 |
| 02***03 | Kit-Gasket, Bottom | 1 |
| 02***83 | Kit-Gasket, Top | 1 |
T8-2-2 Kit, Engine Overhaul, Yb Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
Frequently asked questions
What engine does the JCB Fastrac 130t use?
The JCB Fastrac 130t uses a Perkins 6L six-cylinder diesel engine.
What is the operating weight of the JCB Fastrac 130t?
The operating weight is approximately 6,520 kg (14,374 lb).
What model replaced the JCB Fastrac 130t?
The Fastrac 130t was succeeded by the Fastrac 1100 series, specifically the 1115 and 1135 models.
What FASTRAC 130t owners discuss
What engine is used in the JCB Fastrac 130t?
The JCB Fastrac 130t uses a Perkins engine. The Fastrac 130t-65 variant specifically utilizes a Perkins engine, while later models in the 3000 series (such as the 3185) transitioned to Cummins engines. The Fastrac 125 (1991–1993) also used a 125 hp Perkins 6-cylinder engine. Engine serial and model designation vary by production year and specific sub-model configuration within the 130t range.
What are the known powertrain and transmission behaviors for the Fastrac 130t?
The Fastrac 130t features a synchromesh transmission. Owners report that changing gears can be difficult, often requiring the operator to drop one or two splits depending on load between mechanical gear changes. The gearbox is considered less robust for heavy grain cart work compared to later Vario transmissions found on the 8250 model. The 3230 and 3220 models are noted for having a more built-proof gearbox than the earlier 3185.
What are the typical undercarriage or wear patterns for this machine type?
The Fastrac 130t utilizes external disc brakes. A common wear pattern involves the disc brake pad calipers seizing, which can lead to overheating and potential fires. The park brake is also noted as less reliable. Additionally, Spicer joints in the drive train are prone to failure; if they let go, they can cause expensive damage to lower casings. Regular greasing of the drive train UJs is required.
What are the common electrical or sensor issues reported by owners?
Early Fastrac models (pre-2000) had a reputation for electrical fires due to wiring harnesses using very few wire colors, making fault-finding difficult. Later models, particularly those with electric spools (such as the 'plus' models like the 3170 and 3190), experience frequent failure of the electric spool valves, which stop working and require replacement. Owners often convert these to manual spools to avoid high repair costs. DEF sensors are also a common issue across modern JCB tractors.
What is the typical turning circle and steering behavior?
The Fastrac 130t has limited steering lock, resulting in poor turning circle for field work. Operators often find themselves making three-point turns on headlands. The steering lock was not a strong point until very recently in the Fastrac lineage. The center-mounted cab also limits the view of the drawbar.
What should be checked when buying a used Fastrac 130t?
When buying a used Fastrac 130t, check drive train UJs and Spicer joints for wear or leakage. Inspect electric spool valves if equipped, as they are prone to failure. Verify operation of external disc brake calipers to ensure they do not seize. Check PUH linkage for seizure if a demount sprayer is fitted. Also, inspect electrical wiring for signs of previous fire damage or poor repairs, especially on models from the 1990s.
What is the safety-critical fix regarding the braking system?
The external disc brake pad calipers are prone to seizing, which can lead to brake failure or fire. Have your dealer verify the condition and operation of the disc brake calipers and park brake mechanism before operation.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 130t. Related factory variants of the same model family:
FASTRAC 130t
Need a specific FASTRAC 130t part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.