JCBagriculturalfastrac
Jcb FASTRAC 125-30
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 125 is a four-wheel drive utility tractor belonging to the Fastrac 100 series, manufactured from 1991 to 1993. It is powered by a Perkins 1000 6.0-liter turbocharged diesel engine producing 125 hp. The machine weighs 14,374 lb and features a synchromesh transmission with 18 forward and 6 reverse gears. It is equipped with a standard cab with air conditioning, pneumatic dry disc brakes, and a Category 3 rear hitch with a 15,435 lb lift capacity. Configurations include 4WD drive, hydraulic power steering, and standard 30 km/h or high-speed transmission options.
The Fastrac 125 was succeeded by the Fastrac 135, 145, 150, 155, and 185 models, which shared the same chassis and transmission architecture but utilized different engine variants, including Cummins engines in later models like the 185. The machine remains relevant in the used market due to its robust Perkins engine and durable synchromesh transmission, which are widely supported by aftermarket parts. The shared service manual (the OEM part reference) across the 125-185 range simplifies maintenance for fleet owners and independent mechanics, ensuring long-term viability for these high-horsepower utility tractors.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb FASTRAC 125-30 specifications
Engine
| Model | Perkins 1000 |
| Type | Turbocharged, liquid-cooled diesel |
| Displacement | 6.0 L (365.2 ci) |
| Cylinders | 6 |
| Bore x Stroke | 100 x 127 mm (3.94 x 5.00 in) |
| Net Power | 93.2 kW (125 hp) @ 2,400 rpm |
| Peak Torque | 550 N·m (405.4 ft·lb) @ 1,400 rpm |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 6,520 kg (14,374 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 5,760 mm (226.8 in) |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | 2,910 mm (114.6 in) |
| Wheelbase | 1,670 mm (66 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
| Front Tires | the OEM part reference |
| Rear Tires | the OEM part reference |
Performance
| Travel Speeds | Not documented for this exact serial range — verify with your dealer |
| Rear Lift Capacity | 6,500 kg (14,330 lb) |
| Front Lift Capacity | 2,500 kg (5,512 lb) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 280 L (74 US gal; 61.6 Imp gal) |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
FASTRAC 125-30 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 15.0–16.5 liters (3.96–4.36 US gal.) | JCB-approved engine oil; viscosity varies by climate (e.g., 15W-40 for normal use, 10W-30 for moderate/Mediterranean climate) |
| Cooling system | 34 liters (8.98 US gal.) | JCB-approved coolant mixture |
| Fuel tank | 280 liters (74 US gal.) | Diesel fuel |
| Transmission/Powertrain | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Final drives | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system AND tank | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Axles/Differentials | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease | N/A | JCB-approved grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb FASTRAC 125-30 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the FASTRAC 125-30 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil levels daily and check coolant levels before operation. Inspect hydraulic fluid levels and transmission oil levels regularly. Analyze fuel sediment bowls and clean fuel filters to prevent injector issues. Check front axle differential and hub oil levels for contamination. Monitor rear axle oil for wear particles. Inspect air filter elements for clogging to maintain Perkins engine performance. Track fan belt tension to ensure proper cooling system operation.
Corrective & Common Repairs
Address overheating issues by cleaning the radiator and checking fan belts. Replace worn foot brake pads and parking brake pads to maintain pneumatic dry disc brake function. Renew hydraulic kick-out spools and control valve solenoids if draft control fails. Fix fuel system leaks by replacing fuel lift pump seals and cleaning the fuel tank strainer. Repair steering box input shaft seals to prevent fluid loss. Replace worn clutch friction plates and counter plates in the transmission.
Overhaul & Rebuild Points
Rebuild the main drive clutch by replacing piston liners, O-rings, and circlips. Overhaul the transmission gearbox by inspecting bearings, gears, and synchronizer rings. Rebuild the hydraulic pump for suspension and steering by replacing seals and spools. Inspect the Perkins engine cylinder head gaskets and valve adjustments. Rebuild the PTO gearbox by replacing input and output section seals. Check the differential lock control valve and powersplit control valve for proper operation.
Seasonal & Environment Servicing
In cold weather, check antifreeze pump operation and ensure coolant mixture is appropriate. Inspect cab air conditioning filters and compressor belts for proper function. In dusty environments, clean the radiator frequently and check air filter elements more often. Grease propshafts, PTO drive shafts, and rear suspension cylinder pivots regularly. Check ROPS structure integrity and cab mounting bolts. Inspect tire pressures and loads for seasonal soil conditions.
FASTRAC 125-30 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/906900 | Filter, Air | Air intake service | Check fitment → |
| 32/909700 | Filter, Air, Paper | Air intake service | Check fitment → |
| 32/208300 | Filter, Air | Air intake service | Check fitment → |
| 02/100284 | Element, Oil Filter, Canister Type-Short | Lubrication service | Check fitment → |
| 02/200393 | Head, Oil Filter | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
FASTRAC 125-30 attachments & work tools
Three-Point Hitch
The machine utilizes a Category 3 hitch system for rear implement attachment. Rear lift capacity is rated at 6500 kg (14330 lbs). Front lift capacity is rated at 2500 kg (5512 lbs).
Power Take-Off (PTO)
The rear PTO operates at standard speeds of 540 rpm and 1000 rpm. The transmission is a synchromesh gearbox providing 18 forward and 6 reverse gears to manage PTO engagement.
Hydraulic System
The tractor is equipped with a hydraulic system compatible with standard agricultural implements. Specific flow rates and valve configurations vary by configuration and series.
Cab and Operator Environment
The cab is standard equipment and includes air-conditioning. The operator environment is designed for high-speed road performance and field work comfort.
Engine and Powertrain
The engine is a Perkins 6.0L 6-cylinder turbocharged diesel producing 125 hp (93.2 kW). The drive configuration is 4x4 4WD with pneumatic dry disc brakes.
All FASTRAC 125-30 assemblies by section
Every catalogued assembly group for the Jcb FASTRAC 125-30. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-1-3 Claw Hitch Cat.2
| 47***03 | Bush, Tension Pin | 1 |
| 47***00 | Hitch, Ball Assembly, Cat 2, Hitch, Ball Assembly, Cat 2; Used With 47***01 On Page A3-4-1. Weld On | 1 |
| 47***02 | Latch, Claw | 1 |
A3-2-12 Rear Deck, "Light" Cover
| 13***7Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
A3-2-8 Trailer Coupling
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***00 | Coupling, Trailer 38.5mm Pin, 'Rockinger 260' | 1 |
A3-2-1 Pick-Up Hitch
| 14***9Z | Washer | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-2-7 Pto Casting Assembly, Rear, With Rear Hitch
| 47***00 | Unit, Rear Power Take-Off Casting, Assembly | 1 |
A3-2-3 Hitch Assembly, Rear
| 13***9Z | Bolt, M10 X 35 | 6 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***3Z | Nut, M20 | 10 |
A3-2-6 Claw Hitch Cat.3
| 47***05 | Spring | 1 |
| 47***10 | Hitch, Ball Assembly, Cat 3 | 2 |
| 47***12 | Latch, Claw | 1 |
A3-4-1 Guard, Propshaft
| 47***01 | Guard, 'Undersheet' | 1 |
| 47***02 | Cord, Shock 12" | 10 |
| 47***03 | Cord, Shock 6" | 4 |
A3-2-20 Swinging Drawbar, Piton Option, With Ladder Hitch
| 13***8Z | Bolt, M20 X 80mm | 4 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
A3-1-4 Weight Tray Assembly, Front, No Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Counterweight, 40kg | 16 |
A3-1-1 Hitch Assembly, Front
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***0Z | Bolt, M20 X 100mm | 4 |
A3-3-1 Stabiliser
| 47***00 | Rod, Stabiliser Assembly, Cat 2-3 Narrow | 2 |
| 47***01 | Rod, Adjusting Link | 1 |
| 47***02 | Tube, Connecting, 430mm Long | 1 |
A3-10-1 Kits
| 47***0K | Kit, Weights Only, (16 Wts) | 1 |
| 47***0K | Kit, Weights Only, (15 Wts) | 1 |
| 47***0K | Kit, 16 Weights &, Front Hitch Carrier | 1 |
A3-2-15 Ladder Hitch, Assembly, Scharmuller
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-2-4 Hitch Assembly, Rear, Lift
| 13***4Z | Bolt, M20 X 60mm | 1 |
| 13***8Z | Bolt, M20 X 80mm | 6 |
| 13***0Z | Bolt, M20 X 100mm | 4 |
A3-2-17 Trailer Coupling, Ladder Hitch, Low & High Speed, Scharmuller
| 47***00 | Coupling, Ladder Hitch, Pin = 30mm O/D; Tractor Weight 9500 Kg. Operating Speeds Up To & Including 40 Kph, Coupling, Ladder Hitch, Pin = 30mm O/D; Not For Use In Italy. For Tractor Operating Speeds Of 40km/H & Less. | 1 |
| 47***00 | Coupling, Ladder Hitch, Pin = 38mm O/D; Not For Use In Italy. For Tractor Operating Speeds In Excess Of 40 Km/H, Coupling, Ladder Hitch, Pin = 38mm O/D; For Central Trailer Axle Weight 13000 Kg. For Operating Speeds Above 40 Kph | 1 |
A3-1-7 Top Link Extension, Uk Front Hitch
| 47***02 | Bracket, Top Link Extension | 1 |
| 47***13 | Pin, Pivot, 25mm X 145mm | 2 |
| 82***66 | Pin, Lynch | 2 |
A3-2-13 Trailer Coupling, Ladder Hitch, 248rd, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 3 |
| 47***15 | Nipple, Grease - Drive In | 2 |
A3-7-1 Rear Under Run Bar
| 47***12 | Pin, Pivot; German- Use With Ladder Hitch. For Use When Pick Up Hitch Is Not Fitted & Rockinger Ladder Hitch Is Mounted, Pin, Pivot | 1 |
| 47***13 | Pin, Pivot, 25mm X 145mm | 2 |
| 47***07 | Ball, Cat 3-2 | 2 |
A3-5-1 Hitch Assembly, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-2-25 Swinging Drawbar, Piton Option, Without Ladder Hitch
| 13***8Z | Bolt, M20 X 80mm | 4 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
A3-1-6 Hitch Assembly, Din 5
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 4 |
A3-1-2 Weight Tray Assembly, Front
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***00 | Link, Top | 1 |
A3-3-5 Lift Rod Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***03 | Shaft | 1 |
| 47***04 | Pin, Spring | 1 |
A3-3-2 Lift Rod Assembly
| 47***00 | Rod, Lift, Assembly | 2 |
| 47***01 | Rod, Top Connector | 1 |
| 47***02 | Cover | 1 |
A3-5-5 Front Din 3 Plate, & Tow Point
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, M16 X 50mm | 6 |
| 13***4Z | Bolt, M16x60 | 4 |
A3-2-5 Drawbar Assembly
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 2 |
A3-6-1 Weight Tray Assembly, Front, No Hitch
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***1Z | Nut | 2 |
| 13***3Z | Nut, M20 | 4 |
A3-1-5 Hitch Assembly, Din 3
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 4 |
A3-2-9 Rear Deck, Support Frame
| 13***2Z | Bolt | 2 |
| 13***2Z | Bolt, M16x50m | 12 |
| 13***3Z | Nut, M20 | 2 |
A3-2-16 Trailer Coupling, Ladder Hitch, Scharmuller
| 47***00 | Coupling, Ladder Hitch, Non-Automatic | 1 |
| 48***91 | Pin, Ladderhitch Coupling | 1 |
A3-2-2 Drawbar Assembly
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 2 |
A3-2-10 Ladder Hitch, Assembly, Rockinger
| 13***0Z | Bolt, M20 X 100mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-3-4 Top Link Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***00 | Link, Top Cat 3 | 1 |
| 47***01 | Rod, Eye End Cat 3 | 1 |
A3-4-2 Guard, Propshaft, Front Pto
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 47***01 | Guard, Front Power Take-Off Propshaft, Front Section | 1 |
| 47***02 | Guard, Front Power Take-Off Propshaft, Rear Section | 1 |
A3-2-14 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
A3-2-18 Trailer Coupling, Ladder Hitch, Scharmuller, Italian
| 47***00 | Coupling, Trailer, Cat.D3 | 1 |
| 47***00 | Coupling, Trailer, Cat.D2 | 1 |
| 47***00 | Coupling, Trailer, Cat C | 1 |
A3-2-11 Rear Deck, Support Frame, & Cover, Heavy Duty
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-3-3 Top Link Assembly
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
| 47***00 | Link, Top, Cat 2 | 1 |
| 47***01 | Rod, Eye End Cat 2 | 1 |
B Bodywork, Cab, Loader End
B1-4-1 Mounting, Front Lights
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M12 X 30 | 6 |
| 13***3Z | Nut, Lock, M10 | 4 |
B1-5-1 Engine Access Steps
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***3Z | Nut, M12 | 4 |
B1-1-2 Pannier Unit, Left Hand
| 13***7Z | Bolt, M10x25 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 16 |
| 13***3Z | Nut, Lock, M10 | 10 |
B1-1-14 Fenders, Front & Rear
| 13***2Z | Bolt, M16x50m | 4 |
| 13***4Z | Bolt, M16x60 | 4 |
| 13***3Z | Nut, Lock, M10 | 28 |
B1-1-11 Bodywork, Rear End Less Hitch
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***8Z | Bolt, M12 X 80mm | 4 |
| 13***4Z | Bolt, M20 X 60mm | 8 |
B1-1-9 Bonnet Release
| 12***00 | Latch, Claw | 2 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***8Z | Bolt, M10 X 30 | 1 |
B1-1-12 Mounting, Chock
| 13***8Z | Bolt, M12 X 30 | 3 |
| 47***01 | Frame, Support | 1 |
| 47***02 | Screw, Clamping | 1 |
B1-1-8 Bonnet & Fittings
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 20 |
| 13***8Z | Screw, M8x30 | 2 |
B1-3-1 Pannier Unit, Right Hand
| 13***7Z | Bolt, M10x25 | 8 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***4Z | Bolt, M10x60 | 1 |
B1-1-4 Tank, Fuel
| 47***03 | Cap, Filler | 1 |
| 47***01 | Tank, Fuel, Plastic, 300 Litres; Use 47***00 | 1 |
| 47***00 | Cap, Filler | 1 |
B1-1-5 Fenders, Front & Rear
| 13***5Z | Bolt | 4 |
| 13***2Z | Bolt, M16x50m | 4 |
| 13***4Z | Bolt, M16x60 | 4 |
B1-1-6 Tank, Hydraulic
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 13***5Z | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-1-1 Chassis & Fitments
| 13***2Z | Bolt | 2 |
| 13***1Z | Bolt, M12 X 45 | 24 |
| 13***6Z | Bolt, M12 X 70mm | 8 |
B1-1-7 Mounting, Front Lights
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***9Z | Bolt, M16 X 35mm | 2 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
B1-1-3 Pannier Unit, Right Hand
| 13***7Z | Bolt, M10x25 | 12 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
B1-1-13 Bonnet Release
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***1Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
B1-1-10 Mounting, Front Lights
| 13***5Z | Bolt, M5 X 20mm Long | 16 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut | 12 |
B1-2-1 Pannier Unit, Left Hand
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Screw, M10x35mm | 2 |
B2-1-5 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 8 |
B2-1-4 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***50 | Glazing, Front Screen | 1 |
| 82***51 | Glazing, Lower Screen R.H. | 1 |
B2-2-8 Seat, Suspension, Air
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-2-11 Seat Belt
| 47***00 | Kit, Seat Belt, Kit, Seat Belt; Contains All Parts Necessary To Fit. Introduced On Production Builds As An Option From M635637 | 2 |
B2-1-15 Mirrors, External
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-2-3 Soundproofing, Cab
| 13***2Z | Screw, M6 X 50 | 1 |
| 14***6Z | Washer, M6 | 1 |
| 47***14 | Panel, Roof Liner R.H. | 1 |
B2-2-9 Seat Belt, Optional
| 13***6Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
B2-1-8 Door, Right Hand, Electric Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B2-2-4 Toolbox
| 13***5Z | Bolt | 3 |
| 14***6Z | Washer, M6 | 3 |
| 47***09 | Cover, L.H. Tool Box | 1 |
B2-2-1 Radio Console
| 13***5Z | Bolt | 5 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 14***6Z | Washer, M6 | 5 |
B2-2-10 Soundproofing, Cab
| 47***20 | Panel, Liner, Roof Hatch | 1 |
| 47***39 | Panel, Roof Lining L.H. | 1 |
| 47***40 | Panel, Roof Lining R.H. | 1 |
B2-2-2 Panel, Instrument, Covers & Brackets
| 13***1Z | Nut | 2 |
| 47***30 | Strip, Foam | 0 |
| 47***41 | Panel, Heater Outlet Duct; Use 47***39, San 04436 | 1 |
B2-2-5 Visor, Sun
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 47***00 | Blind, Sun Visor | 1 |
B2-1-7 Door, Left Hand, Electric Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-1-13 Door, Left Hand, Manual Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-1-10 Door, Window Regulator, Right Hand
| 13***03 | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***05 | Washer, 'P' | 1 |
B2-2-7 Seat, Standard, Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-3-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-1-14 Door, Right Hand, Manual Window
| 12***01 | Key, No. 1001 | 1 |
| 12***90 | Handle, Incl. Grommets & Key | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-1-6 Cab, Roof Hatch
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
B2-1-12 Cab Insulation
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 1 |
| 47***10 | Bracket, Harness Mounting | 4 |
B2-1-2 Cab Frame
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***01 | Panel, Front R.H., Yellow | 1 |
B2-1-1 Cab
| 47***01 | Cab, Assembly; Options = B & F. Cab C/W Controls & Instruments, External Trim & Hatch, & Air Conditioning. | 1 |
| 47***02 | Cab, Assembly | 1 |
| 47***03 | Cab, Assembly | 1 |
B2-1-9 Door, Window Regulator, Left Hand
| 13***03 | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***05 | Washer, 'P' | 1 |
B2-1-11 Light, Working, Blanking Kit
| 14***03 | Screw, 5/8" No 6, Black | 8 |
| 24***01 | Grommet, Blind | 2 |
| 24***08 | Grommet, Blind | 2 |
B2-2-6 Seat, Passenger
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***00 | Seat, Passenger | 1 |
B2-1-3 Cab Base
| 13***5Z | Bolt | 18 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 18 |
B5-1-2 Decals, Cab Interior
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-1-4 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-2-1 Paint
| 42***04 | Paint, Red, 1 Litre | 1 |
| 42***06 | Paint, Red, 5 Litres | 1 |
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
B5-3-1 Tool Kit, Park Brake Release
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 47***00 | Kit, Parkbrake Release | 1 |
| 47***01 | Spanner | 2 |
B5-1-5 Decals, Cab Interior
| 47***35 | Plate, Blanking; For Use When Rear Hitch Is Not Fitted. To Blank Hitch Release Lever Slot In Side Console., Plate, Blanking | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
B5-1-3 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
B5-4-1 Lubrication
| 40***01 | Oil, Jcb T/C-25 Litre, Type C3 Sae 10w | 1 |
| 40***02 | Oil, Jcb T/C-5 Litre, Type C3 Sae 10w | 1 |
| 40***03 | Oil, Jcb T/C - 200 Litres, Sae 10w | 1 |
B5-1-6 Mounting, 40 Kph Sign
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
B5-5-1 Identification, Serial Plates
B5-1-1 Decals
| 81***50 | Label, Transmission Filler | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
| 81***31 | Label, Front Power Take-Off, 'Warning' | 1 |
C Electrics-Machine, Cab & Engine
C1-1-2 Switches, Electrical
| 04***72 | Switch, Switch; Differential Lock Switch. Use 70***00 + Bridging Harness 71***00 | 1 |
| 13***9Z | Screw, M5 X 35mm | 3 |
| 13***9Z | Screw, M10x35mm | 2 |
C1-2-6 Light, Marker, Cab Mounted
| 20***07 | Tie, Cable - 100mm Long | 20 |
| 47***01 | Plate, Backing | 2 |
| 70***00 | Light, End Outline Marker | 2 |
C1-2-2 Light, Indicator, Front
| 13***3Z | Nut | 4 |
| 70***00 | Light, Indicator | 2 |
| 70***01 | Lens | 1 |
C1-1-3 Harness, Machine Electrics, Electronic Draft Control
| 71***00 | Harness, Cab, Electronic, Draft Control | 1 |
| 71***00 | Harness, Chassis, Electronic, Draft Control | 1 |
| 71***00 | Harness, Fender, Electronic, Draft Control | 2 |
C1-1-4 Mountings & Supports, Harness
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 20 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
C1-3-2 Air Conditioning, Installation, Engine Bay
| 13***2Z | Bolt, M6 X 50 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C1-1-1 Harness, Machine Electrics
| 71***00 | Relay, Black, Relay, Black; 2 Starter Relays In Panel Harness. Located By Foot Pedal R.H. Mounting Bracket | 2 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
| 71***00 | Harness, Esos | 1 |
C1-2-5 Horn, Single Tone
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***6Z | Washer, M6 | 1 |
C1-3-1 Air Conditioning, Installation, Engine Bay
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 24***13 | Grommet | 1 |
C1-2-1 Light, Head
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***3Z | Nut | 8 |
| 70***00 | Light, Head, White, Left Hand Dip; San25865.Had Been Made Nsp By Persons Unknown, Reinstated By P Gamble 14/5/2008. | 1 |
C1-2-4 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***00 | Light, Cluster, R.H. | 1 |
| 70***01 | Lens, Rear Combination | 1 |
C1-2-7 Light, Head
| 26***00 | Headlight, R/H. Dip, 12 Volt, Clear | 2 |
| 26***00 | Headlight, R.H. Dip, 12 Volt, Yellow; Use 26***00 Light,Clear.San5287 23/12/94 | 2 |
| 26***00 | Headlight, L/H. Dip, 12 Volt, Clear | 2 |
C1-2-8 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-1-20 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-1-5 Harness, Machine Electrics
| 70***00 | Switch, Vacuum Sensor | 1 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
| 71***00 | Harness, Connector | 1 |
C1-2-3 Light, Beacon, Hazard Warning
| 12***19 | Plate, Beacon Mounting | 1 |
| 47***31 | Plate, Beacon Mounting; Bond To Cab Roof. See Service/Workshop Manual For Adhesives. | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-1-6 Harness, Machine Electrics, Electronic Draft Control
| 71***00 | Harness, Cab, Electronic, Draft Control | 1 |
| 71***00 | Harness, Chassis, Electronic, Draft Control | 1 |
| 71***00 | Harness, Rear Fender, Edc | 1 |
C1-4-1 Light, Number Plate, Italian
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***07 | Spacer | 2 |
C2-4-2 Alternator Mountings, , 1006-6t
| 02***92 | Washer | 1 |
| 02***24 | Lever, Alternator Adjusting | 1 |
| 02***94 | Bracket, Mounting | 1 |
C2-3-1 Alternator
| 02***43 | Pulley, Alternator | 1 |
| 71***06 | Kit-Bearing, Slip Ring End | 1 |
| 71***07 | Ring, Slip | 1 |
C2-4-2 Alternator Mountings, , 145t/160t
| 02***92 | Washer | 1 |
| 02***24 | Lever, Alternator Adjusting | 1 |
| 02***94 | Bracket, Mounting | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-5-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C3-2-1 Air Conditioning, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut | 1 |
C3-1-13 Installation, Tachograph
| 13***3Z | Nut, M20 | 3 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 14***06 | Washer | 3 |
C3-1-6 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-2-9 Heater Assembly
| 14***6Z | Washer, M6 | 14 |
| 47***05 | Screw | 14 |
| 47***00 | Heater, Assembly; Use 47***00, San 03904 | 1 |
C3-1-7 Light, Working
| 70***03 | Spring | 1 |
| 70***00 | Light, Front Working | 0 |
| 70***01 | Gasket | 1 |
C3-2-5 Air Conditioning, Assembly
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***1Z | Nut, M5-8 | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
C3-2-8 Air Conditioning, Assembly
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 14***6Z | Washer, M6 | 21 |
| 47***03 | O Ring | 1 |
C3-1-11 Instrument Cluster
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C3-2-2 Air Conditioning, Intake
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 2 |
| 32***00 | Filter, Air | 1 |
C3-1-18 Instrument Panel
| 12***68 | Bracket | 2 |
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
C3-1-14 Control Panel, Without Rear Hitch
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 47***07 | Console, Side Panel | 1 |
| 47***09 | Switch, Plate | 1 |
C3-1-8 Battery & Fittings
| 13***5Z | Bolt | 7 |
| 13***1Z | Nut, M8 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-1-15 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***49 | Panel, Dash/Instrument | 1 |
C3-1-1 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***42 | Panel, Instrument; Use 47***49 X 1 + 47***00 X 3 | 1 |
C3-1-2 Control Panel, With Rear Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 13***3Z | Nut | 3 |
C3-2-3 Heater, Installation
| 13***5Z | Bolt | 5 |
| 13***1Z | Nut, M5-8 | 2 |
| 13***03 | Nut | 2 |
C3-1-16 Instrument Panel
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 47***54 | Panel, Dash/Instrument; For Use With Speedo. Use Panel 47***64 With 1 X 81***78 + 1 X 81***76 + 4 X 82***11 | 1 |
C3-1-9 Switch, Column
| 13***05 | Screw | 2 |
| 70***00 | Switch, Column | 1 |
| 70***01 | Column, Switch Cap | 1 |
C3-1-10 Light, Working, Optional
| 70***00 | Light, Working | 1 |
| 70***00 | Light, Working | 1 |
| 72***61 | Bulb, 12v-55w H3 | 1 |
C3-2-7 Heater, Installation
| 13***5Z | Bolt | 5 |
| 13***1Z | Nut, M5-8 | 2 |
| 13***03 | Nut | 2 |
C3-1-3 Switch, Draft Control
| 47***00 | Panel, Draft Control, Panel, Draft Control; For Components See Frame C3-1-3. Knobs To Be Fitted After Bolting To Main Panel | 1 |
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
C3-4-1 Air Conditioning, Intake
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 2 |
| 32***00 | Filter, Carbon, Cab Intake | 1 |
C3-1-12 Fuse Box & Relays
| 13***01 | Nut, M5 | 4 |
| 13***10 | Capscrew | 4 |
| 47***43 | Bracket, Fuse Box | 1 |
C3-2-6 Air Conditioning, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Bolt | 5 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
C3-2-4 Heater Assembly
| 14***5Z | Washer, M5; Replaces 69***59 | 6 |
| 47***00 | Heater, Assembly, 12 Volt | 1 |
| 47***01 | Motor, & Blower Assembly | 1 |
C3-3-1 Light, Head, Right Hand Dip
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 24***05 | Grommet | 2 |
C3-1-5 Washer Kit, Windscreen
| 13***5Z | Bolt | 2 |
| 24***03 | Grommet | 2 |
| 47***03 | Grommet | 2 |
C3-1-17 Fuse Box & Relays
| 13***01 | Nut, M5 | 1 |
| 13***10 | Capscrew | 2 |
| 47***43 | Bracket, Fuse Box | 1 |
C3-1-4 Wash/Wipe, Front Screen
| 13***1Z | Setscrew, M6 X 12mm Long | 3 |
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
D Controls-Machine, Engine & Steering
D1-1-2 Controls, Linkage, Range Gearbox
| 47***01 | Boss, Pivot | 1 |
| 47***00 | Link, Connecting | 1 |
| 47***00 | Connector, Gear Change; Cwe,Then 47***96 San5538 10/4/95 Gk | 1 |
D1-1-5 Clutch, Master Cylinder
| 14***04 | Washer, Copper | 1 |
| 15***00 | Reservoir, & Cap Assembly | 1 |
| 15***01 | Reservoir, Cap | 1 |
D1-2-4 Control, Pick-Up Hitch
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 1 |
D1-1-6 Clutch & Actuation, Circuit
| 47***06 | Hose, Armoured | 1 |
| 47***08 | Nut, Thin M12 X 1.0 Pitch | 2 |
| 47***00 | Pipe, Master Cylinder | 1 |
D1-1-3 Controls, Linkage, Speed Gearbox
| 47***00 | Connector, Gear Change; Cwe,Then 47***96 San5538 10/4/95 Gk | 1 |
| 47***00 | Ball, Joint 20mm Dia | 1 |
| 47***00 | Link, Connecting; Cwe,Then 47***95 Link.San5538 10/4/95 Gk | 1 |
D1-2-2 Control Linkage, 4 Spool Valve
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 8 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-2-5 Control, Hitch Release
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 2 |
D1-2-3 Control, Lever, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***7Z | Capscrew, Socket Head | 2 |
D1-2-1 Control Linkage, 2 Spool Valve
| 13***5Z | Bolt | 5 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-1-1 Gear Change
| 12***04 | Knob | 2 |
| 13***5Z | Bolt | 8 |
| 13***2Z | Nut | 2 |
D1-1-7 Controls,Linkage Kit, ,Retrofit Gearbox,, Range
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***9Z | Capscrew, M8 X 90mm | 1 |
D1-1-4 Control, Pedal Assembly
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 1 |
| 13***1Z | Nut, M8 | 2 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 12***02 | Knob, Controls, Yellow | 1 |
D2-1-2 Control, Throttle
| 12***02 | Knob, Controls, Yellow | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***1Z | Nut | 2 |
E Hydraulics Including Steering
E1-1-2 Hose & Pipework, 2 Spool, With Rear Hitch
| 22***51 | Circlip | 8 |
| 24***07 | O Ring | 1 |
| 24***06 | O Ring | 2 |
E1-1-10 Circuit, Front Hitch
| 24***05 | O Ring | 2 |
| 24***05 | O Ring | 3 |
| 25***00 | Valve, Cut Off | 1 |
E1-3-1 Circuit, Flow Divider, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-2-6 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***06 | O Ring | 4 |
E1-1-19 Circuit, Front Hitch
| 13***7Z | Bolt | 2 |
| 13***2Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
E1-1-1 Circuit, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 22***08 | Clip, Jubilee | 2 |
| 22***09 | Clip, Jubilee | 2 |
E1-1-21 Circuit, Steering
| 13***5Z | Bolt, M12x20 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-1-13 Circuit, Auxiliary, Free Flow Return, Without Rear Hitch
| 22***51 | Circlip | 2 |
| 24***06 | O Ring | 2 |
| 45***00 | Coupling, Quick Release | 1 |
E1-1-17 Circuit, Auxiliary, Free Flow Return, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 22***51 | Circlip | 2 |
E1-1-3 Hose & Pipework, 4 Spool, With Rear Hitch
| 22***51 | Circlip | 12 |
| 24***07 | O Ring | 2 |
| 24***05 | O Ring | 3 |
E1-1-14 Circuit, Front Bumper
| 13***9Z | Screw, M10x35mm | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
E1-1-12 Circuit, Rear Hitch
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
E1-2-3 Circuit, Transmission, Rear Power Take Off
| 13***8Z | Bolt, M8 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***9Z | Capscrew, M8 X 90mm | 2 |
E1-1-20 Circuit, Rear Hitch
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 3 |
E1-1-18 Circuit, Auxiliary, Front
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 2 |
| 22***51 | Circlip | 4 |
E1-1-4 Circuit, Rear Hitch
| 24***05 | O Ring | 1 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 3 |
E1-1-5 Circuit, Steering
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-1-6 Circuit, Suspension
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 24***05 | O Ring | 1 |
| 24***06 | O Ring | 2 |
E1-2-8 Circuit, Transmission, Front Power Take Off
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt | 1 |
| 24***05 | O Ring | 2 |
E1-1-16 Hose & Pipework, 2 Spool, Without Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***9Z | Screw, M10x35mm | 3 |
| 13***3Z | Nut, Lock, M10 | 4 |
E1-2-1 Circuit, Transmission, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 24***05 | O Ring | 1 |
| 24***06 | O Ring | 3 |
E1-1-11 Circuit, Steering
| 13***5Z | Bolt, M12x20 | 2 |
| 13***8Z | Bolt, M10 X 30mm | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
E1-2-10 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***03 | O Ring | 1 |
E1-1-7 Circuit, Auxiliary, Free Flow Return, With Rear Hitch
| 22***51 | Circlip | 2 |
| 24***06 | O Ring | 2 |
| 45***00 | Coupling, Quick Release | 1 |
E1-2-9 Circuit, Transmission, Neutral, Rear Section
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***08 | Clip, Jubilee | 2 |
| 24***06 | O Ring | 4 |
E1-2-4 Circuit, Transmission, Front Power Take Off
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***7Z | Bolt | 2 |
E1-1-8 Circuit, Front Hitch
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 24***05 | O Ring | 3 |
| 24***05 | O Ring | 11 |
E1-2-5 Circuit, Gearbox, Balance Pipework
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
E1-2-2 Circuit, Transmission, 4wd & Differential Lock
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***05 | O Ring | 3 |
| 24***07 | O Ring | 1 |
E1-1-15 Hose & Pipework, 4 Spool, Without Rear Hitch
| 22***51 | Circlip | 12 |
| 24***07 | O Ring | 3 |
| 24***05 | O Ring | 1 |
E1-2-7 Circuit, Transmission, Neutral, Front Section
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 24***06 | O Ring | 8 |
| 30***00 | Cooler, Combined Hydraulic, Transmission | 1 |
E1-1-9 Circuit, Neutral
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 17***03 | Cap, Female | 2 |
| 22***08 | Clip, Jubilee | 2 |
E2-2-1 Pump, Gearbox Low Pressure, & External Hydraulics
| 13***8Z | Bolt, M12 X 30 | 2 |
| 20***03 | Key; Replaced By 20/20***06, See San05154 | 1 |
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
E2-1-2 Pump, Steer & Suspension
| 20***06 | Washer, Spring | 4 |
| 20***03 | Bolt, 3/8"Unc 162 | 4 |
| 20***04 | O Ring | 1 |
E2-1-1 Pump, Steer & Suspension
| 13***07 | Capscrew | 2 |
| 20***02 | Dowel | 6 |
| 20***06 | Washer, Spring | 4 |
E2-3-1 Pump, Steer & Suspension
| 13***7Z | Capscrew, Socket Head | 2 |
| 20***06 | Cap | 1 |
| 20***08 | Cap | 1 |
E3-2-2 Valve, Rear Hitch
| 25***00 | Valve, Rear Hitch | 1 |
| 25***01 | Kit-Solenoid | 1 |
| 25***02 | Kit-Seal | 1 |
E3-1-2 Valve, Section, 3 Position, Single/Double Acting
| 25***16 | O Ring | 1 |
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E3-3-1 Valve, Solenoid
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***9Z | Capscrew, M8 X 90mm | 2 |
E3-4-3 Optional Fit, Transmission Filter, Temperature Cut Out Switch Kit
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 0 |
| 24***06 | O Ring | 1 |
E3-4-2 Filter, Transmission
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element | 1 |
| 32***02 | Switch, Pressure Bypass, C/W Cartridge | 1 |
E3-4-1 Filter, Hydraulic, Tank Mounted
| 58***12 | Element, Filter, 10 Micron | 1 |
| 58***02 | O Ring | 1 |
| 58***04 | Seal | 1 |
E3-1-1 Valve, Components
| 13***9Z | Screw, M10x35mm | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 24***07 | O Ring | 1 |
E3-2-1 Valve, Rear Hitch
| 13***8Z | Bolt, M8 X 80mm Long | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***8Z | Capscrew | 3 |
E3-1-4 Valve, Main Relief
| 25***19 | Kit-Seal, Relief Valve | 1 |
| 25***03 | Valve, Mrv; For Details See Frame E3-1-4. Set Releif Valve Pressure When Installed. See Service Manual For Procedure., Valve, Mrv, Valve, Mrv; For Details See Index E3. Set Releif Valve Pressure When Installed, See Service Workshop Manual For Proceedure. | 1 |
E3-1-3 Valve, Section, 4 Position, With Float
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 1 |
E3-5-1 Valve, Flow Regulator, Diverter
| 25***02 | Coil, 12v | 1 |
| 25***00 | Valve, Priority, Flow Divider | 1 |
| 25***01 | Valve, Relief, Cartridge | 1 |
E4-1-5 Ram, Rear Hitch, Cat Iii, Option
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***03 | Plug | 1 |
E4-1-3 Ram, Rear Hitch, Cat Iii
| 47***00 | Ram, Single Acting, 80mm Plunger Type; Cat 3 Hitch. For Parts See Freme E4-1-3, Ram, Single Acting, 80mm Plunger Type | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Rod, Assembly | 1 |
E4-1-2 Ram, Rear Hitch, Cat Ii
| 47***00 | Ram, Single Acting, 75mm Plunger Type, Ram, Single Acting, 75mm Plunger Type; Cat 2-3 Hitch. For Parts See Frame E4-1-2 | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Rod, Assembly | 1 |
E4-1-1 Ram, Front Hitch
| 47***00 | Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod; For Parts See Index E4. Plug Un-Used Ports With 81***18 X 2, Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod; 4 Ports On Cylinder. Blank Un-Used Ports With 81***18 X 2, Ram, Lift, Front Hitch, 60mm Cyl X 30mm Rod | 2 |
| 47***01 | Kit-Seal, 60mm Cyl X 30mm Rod | 1 |
| 47***02 | Nut, End | 1 |
E4-2-1 Ram, Suspension, Option
| 47***03 | Plug | 1 |
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
E4-1-4 Ram, Suspension
| 47***00 | Ram, Single Acting, Suspension 40mm Dia | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Cylinder | 1 |
F Axles, Wheels & Transmission
F1-1-3 Hub & Components
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
F1-1-10 F1-1-10
F1-1-6 Remote Greasing
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 47***00 | Pivot, Remote Greasing, Assembly | 1 |
| 47***01 | Adapter, Self Tapping; Nsp. Not Available Separately, Supply Complete Assembly 47***00 Only | 1 |
F1-1-7 Differential, Components, 'Maxtrac'
| 44***08 | Pin, Trunnion | 1 |
| 44***09 | Housing, Differential; Mss Use 44***00 X 1, + 21***16 X 1,, + 13***15 X 8. San 04918 | 1 |
| 44***00 | Differential, Gear Kit | 1 |
F1-1-2 Axle Drive Head
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
F1-1-1 Axle Assembly, Front
| 13***9Z | Screw, M10x35mm | 10 |
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***5Z | Bolt, M12x20 | 2 |
F1-1-5 Differential, Components, No-Spin
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
| 45***00 | Differential, Case Assembly | 1 |
F2-1-10 Hub & Components Kit, Upgrade 3 To 4 Pin
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 8 |
| 45***08 | Pad, Thrust | 2 |
F2-1-4 Hub & Components
| 13***7Z | Bolt, M10x25 | 4 |
| 13***09 | Bolt | 12 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-1-3 Differential, Assembly
| 13***8Z | Bolt, M10x80 | 8 |
| 45***02 | Pin, Trunnion; Use 45***03 | 2 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
F2-1-1 Axle Assembly, Rear
| 13***09 | Bolt | 14 |
| 13***5Z | Bolt, M16x65 | 4 |
| 13***03 | Nut | 4 |
F2-1-2 Axle Drive Head
| 04***72 | Switch, Switch; Differential Lock Switch. Use 70***00 + Bridging Harness 71***00 | 1 |
| 13***17 | Bolt | 2 |
| 22***60 | Circlip | 1 |
F3-2-1 Propshafts
F3-2-2 Propshafts, Axle Drive
| 11***25 | Strap | 6 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
F3-1-1 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F3-1-6 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, 20.00 X 30.5 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-1-4 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F3-1-3 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W15l X 24 | 1 |
| 41***00 | Wheel, W16l X 24 | 1 |
F3-1-2 Axle Lock Stops
| 47***00 | Kit, Axle-Lockstops | 1 |
| 47***01 | Plate, Lock Stop Keeper | 1 |
| 47***02 | Stop, Lock, 30mm Long Head, ( Stamped - '68') | 2 |
F3-1-5 Wheels & Tyres
| 15***01 | Valve | 1 |
| 41***00 | Wheel, 20.00 X 30.5 | 1 |
| 41***00 | Rim, Wheel, Dw15l X 30, 10 Stud | 1 |
F3-1-7 Wheels & Tyres
| 05***01 | Rim | 1 |
| 05***02 | Disc | 1 |
| 05***03 | Bolt | 8 |
F5-1-2 Gearbox, Power Take Off, 2 Speed, Twin Take Off
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Bolt, M10 X 35 | 6 |
| 45***00 | Gearbox, Power Take Off, (Double Take Off) | 1 |
F5-1-3 Gear Group, Input & Idler, Power Take Off Gearbox
| 13***7Z | Bolt, M10x25 | 6 |
| 22***58 | Circlip, Internal | 1 |
| 22***94 | Circlip, Internal | 1 |
F5-1-8 Clutch & Actuation
| 13***06 | Bolt | 8 |
| 13***6Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
F5-1-7 Clutch Assembly, Power Take Off, Front
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 14***14 | Washer | 1 |
F5-1-9 Clutch Servo
| 15***08 | Screw, Bleed, 3/8"Unf | 1 |
| 15***26 | Screw Bleed | 1 |
| 47***00 | Clutch, Servo | 1 |
F5-1-5 Clutch Release, Selector Mechanism, Power Take Off Gearbox
| 13***7Z | Bolt, M10x25 | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***35 | Screw; Now Use 44***10 | 6 |
F5-1-4 Gear Group, Output, Intermediate, Power Take Off Gearbox
| 13***5Z | Screw, Set, M8 X 20 | 5 |
| 22***62 | Circlip, Internal | 1 |
| 22***85 | Circlip, Internal | 1 |
F5-1-6 Clutch Assembly, Power Take Off, Rear
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 14***14 | Washer | 1 |
F5-1-1 Gearbox, Power Take Off, 2 Speed, Single Take Off
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Screw, M10 X 35 | 6 |
| 45***46 | Cover, End | 1 |
F6-1-9 Gearbox, 6 Speed, Remote Control Assy, Y04041
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F6-1-3 Gearbox, 6 Speed, Case Assemblies, Y04041
| 45***10 | Housing, Assembly, Rear | 1 |
| 45***11 | Housing, Rear; Nla Use 45***10 For Mk3 To; M635199, 45***03 For Mk4 From; M635200 | 1 |
| 45***12 | Bush, Selector Shaft | 2 |
F6-2-7 Gearbox, 6 Speed, Front Cover Assembly, Y04141
| 45***28 | Washer, Spring | 5 |
| 45***97 | Seal, Oil | 1 |
| 45***98 | Screw, M10 | 5 |
F6-2-9 Gearbox, 6 Speed, Remote Control Assy, Y04141
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
F6-2-5 Gearbox, 6 Speed, Input Shaft Assembly, Y04141
| 45***49 | Plunger | 1 |
| 45***50 | Roller, 8mm | 1 |
| 45***51 | Spring, Synchro | 1 |
F6-2-3 Gearbox, 6 Speed, Case Assemblies, Y04141
| 45***12 | Bush, Selector Shaft | 2 |
| 45***13 | Plug, Cup | 2 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
F6-2-8 Gearbox, 6 Speed, Selector Controls, Y04141
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F6-2-10 Gearbox, 6 Speed, Rear Housing, Y04141
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 2 |
F6-1-4 Gearbox, 6 Speed, Mainshaft Assembly, Y04041
| 45***01 | Gear, Output 31t | 1 |
| 45***06 | Kit, Circlip | 3 |
| 45***42 | Shaft, Assembly | 1 |
F6-2-1 Gearbox, 6 Speed, Installation, Y04141
| 12***02 | Plate, Compression | 2 |
| 13***7Z | Bolt, M10x25 | 8 |
| 13***9Z | Screw, M10x35mm | 21 |
F6-1-8 Gearbox, 6 Speed, Selector Controls, Y04041
| 45***99 | Block, Selector | 1 |
| 45***21 | Gear, Selector Assembly | 1 |
| 45***22 | Pin | 1 |
F6-1-10 Gearbox, 6 Speed, Rear Housing, Y04041
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 2 |
F6-1-1 Gearbox, 6 Speed, Installation, Y04041
| 12***02 | Plate, Compression | 2 |
| 13***7Z | Bolt, M10x25 | 8 |
| 13***9Z | Screw, M10x35mm | 21 |
F6-1-7 Gearbox, 6 Speed, Front Cover Assembly, Y04041
| 45***28 | Washer, Spring | 5 |
| 45***97 | Seal, Oil | 1 |
| 45***98 | Screw, M10 | 5 |
F6-2-11 Gearbox, 5 Speed, Remote Control Assy, Y04141
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
F6-1-5 Gearbox, 6 Speed, Input Shaft Assembly, Y04041
| 45***62 | Shaft, Input, 6th Gear | 1 |
| 45***68 | Bearing, Roller | 1 |
| 45***73 | Circlip | 1 |
F6-2-4 Gearbox, 6 Speed, Mainshaft Assembly, Y04141
| 45***06 | Kit, Circlip | 2 |
| 45***44 | Gear, 3rd | 1 |
| 45***45 | Bearing, Needle Roller | 2 |
F6-1-6 Gearbox, 6 Speed, Counter Shaft Assy, Y04041
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F6-2-2 Gearbox, 6 Speed, Repair Kits Y04141
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F6-2-6 Gearbox, 6 Speed, Counter Shaft Assy, Y04141
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F6-1-2 Gearbox, 6 Speed, Repair Kits, Y04041
| 45***00 | Kit, Basic Overhaul | 1 |
| 45***01 | Kit, 1st/2nd Synchro; Use 45***62, San 03901 | 1 |
| 45***02 | Kit, 3rd/4th Synchro; Use 45***63, San 03901 | 1 |
F7-1-3 Shaft, Input, And Reverse Gear, Synchro Rangebox ( Spicer )
| 45***07 | Hub, Sleeve | 1 |
| 45***00 | Gear, Assembly Synchro; Replaced By N.L.A. Use 45***00 0r 45***00, + Kit 99***88. See San 12610 | 1 |
| 45***01 | Shaft, Main | 1 |
F7-1-1 Gearbox,, Spicer
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F7-1-13 Gear Change,Manual, Rangebox,Retrofit
| 13***5Z | Bolt | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***23 | Pin | 1 |
F7-1-6 Gear Change, Spicer
| 13***5Z | Bolt | 4 |
| 44***20 | Retainer, Spring | 1 |
| 44***21 | Gaiter, Gear Change | 1 |
F7-1-11 Shaft,Input,, And Reverser Gear., Eaton Synchro.Rangebox Replacement
| 45***02 | Gear, Input 40t | 1 |
| 45***49 | Plunger | 3 |
| 45***51 | Spring, Synchro | 3 |
F7-1-4 Shaft Group, Output, Spicer
| 13***2Z | Bolt | 4 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F7-1-2 Gearbox Housing,, Spicer
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
F7-1-12 Dipstick & Filler,, Transmission,, Replacement Rangebox
| 02***03 | Olive | 1 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 14***26 | Washer, Seal | 1 |
F7-1-5 Shaft, Output Group, 4 Wheel Drive, Spicer
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F7-1-10 Shaft Group,Output, Eaton Synchro.Range, Box Replacement
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
| 45***49 | Plunger | 3 |
F7-2-1 Shaft, Output Group, 4 Wheel Drive, Option
| 14***14 | Washer | 1 |
| 22***63 | Circlip; Replaces 370a0100z | 1 |
| 22***71 | Circlip | 1 |
F7-1-8 Gearbox,, Eaton Synchro.Range, Box.
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F7-1-7 Dipstick Tube, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 15***00 | Nut, Sealastic | 1 |
| 22***04 | Clip, Jubilee | 2 |
F7-1-9 Gearbox Housing,, Eaton Synchro.Range, Box
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
F8-1-7 Installation, Power Take Off, Front ( Single )
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 2 |
F8-2-5 Guard, Static, Power Take Off, Rear - French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F8-3-1 Installation, Power Take Off, Rear, Without Hitch
| 14***14 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 44***15 | Breather | 1 |
F8-1-2 Gearbox Transfer, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F8-2-6 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F8-1-6 Gearbox Transfer, Front ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F8-2-4 Shaft, Adapter
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F8-1-1 Installation, Power Take Off, Front
| 11***25 | Strap | 2 |
| 13***0Z | Bolt, M10 X 40 | 16 |
| 13***1Z | Bolt, M10 X 45mm | 3 |
F8-2-2 Propshaft, Rear Power Take Off
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F8-2-3 Guard, Power Take Off, Rear
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 3 |
F8-2-1 Installation, Power Take Off, Rear, With Hitch
| 14***14 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 44***15 | Breather | 1 |
F8-1-4 Guard, Power Take Off, Front
| 13***3Z | Screw, M8 X 16 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 47***08 | Guard, Rear Section | 1 |
F8-1-3 Guard, Power Take Off, Front
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 2 |
F9-1-1 Transmission, Gearbox Assembly
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***3Z | Bolt, M12 X 55 | 4 |
| 13***3Z | Bolt, M12 X 130 | 4 |
G Brakes
G1-2-13 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Brake Threshold | 1 |
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 3 |
G1-2-15 Circuit, Air Brakes, Chassis
| 15***00 | Adapter, 'T' | 4 |
| 15***00 | Valve, Pressure Reducing | 1 |
| 47***03 | Pipe, Air Intake | 1 |
G1-3-5 Clamps, Brake Circuit
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Bolt, M10x25 | 1 |
G1-2-12 Coupling, Trailer Brake
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, 'C' Type, Female, With Shut Off; Use 45/91***00 Changed @ M636508, San 04954 | 1 |
| 45***00 | Coupling, 'C' Type, Male, With Shut Off; Use 45/91***00 Changed @ M636508, San 04954 | 1 |
G1-3-7 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Single Line | 1 |
| 45***01 | Kit-Repair | 1 |
| 45***02 | Cover, Dust | 1 |
G1-9-1 Valve, Trailer Brake, Italian
| 15***00 | Valve, Trailer Brake | 1 |
| 15***01 | Kit-Repair | 1 |
G1-2-8 Actuator, Air/Hydraulic
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 15***00 | Actuator, Air/Hydraulic | 2 |
| 15***01 | Kit-Repair, Air/Hydraulic Actuator | 1 |
G1-2-4 Valve, Brake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
G1-3-3 Clamps, Brake Circuit
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
G1-1-4 Actuator, Air
| 13***2Z | Nut | 2 |
| 47***21 | Piston, Spring Actuator | 1 |
| 47***22 | Capscrew | 8 |
G1-8-1 Coupling, Trailer Brake, Italy
| 13***9Z | Screw, M10x35mm | 5 |
| 13***3Z | Nut, Lock, M10 | 5 |
| 45***00 | Coupling, Twin | 1 |
G1-3-8 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-2-6 Valve, Unloader
| 15***00 | Valve, Unloader | 1 |
| 15***01 | Kit-Repair, Unloader Valve | 1 |
G1-3-6 Installation Circuit, Air Trailer Brakes
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Nut | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G1-2-22 Valve, Brake Threshold
| 15***00 | Valve, Brake Threshold | 1 |
| 99***04 | Kit-Repair, Threshold Valve | 1 |
G1-6-1 Circuit, Air Brakes, Cab, 3 Position Handbrake Control
| 15***00 | Valve, Handbrake | 1 |
| 15***00 | Valve, Brake | 1 |
| 20***07 | Tie, Cable - 100mm Long | 1 |
G1-2-9 Valve, Trailer Brake
| 15***00 | Valve, Trailer Brake | 1 |
| 15***01 | Kit-Repair, Supply Dump Valve | 1 |
| 15***02 | Kit-Repair, Trailer Control V/V | 1 |
G1-2-18 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-4-1 Circuit, Twin Air Guage, Installation
| 24***02 | Grommet | 1 |
| 64***00 | Pipe, Air 3/16" | 0 |
| 64***01 | Tube, Air, 5 Metre Length | 0 |
G1-2-3 Circuit, Air Brakes, Chassis
| 15***00 | Adapter, 'T' | 3 |
| 47***03 | Pipe, Air Intake | 1 |
| 47***04 | Pipe, Rigid 5/8" | 1 |
G1-1-3 Brake, Parking
| 21***14 | Pin, Split/Cotter | 4 |
| 47***00 | Brake, Assembly, Park; Use 47***00 X 1 + 47***32 X 1, San 04829 | 1 |
| 47***01 | Plug | 1 |
G1-10-1 Valve, Unloader, Italian
| 15***00 | Valve, Unloader, C/W 10 Bar Rv | 1 |
| 15***01 | Kit-Repair | 1 |
G1-2-7 Valve, Auto-Drain
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***01 | Kit-Repair, Auto Drain Valve | 1 |
G1-2-5 Handbrake Control, 2 Position, Uk Only
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
| 15***01 | Cover, Assembly, Top | 1 |
| 15***02 | Knob | 1 |
G1-2-1 Circuit, Air Brakes, Cab, Uk Only
| 13***03 | Bolt | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 15***00 | Valve, Handbrake, 'S' Type,2 Position | 1 |
G1-7-2 Pump, Antifreeze, Air Trailer Brakes
| 47***00 | Pump, Antifreeze | 1 |
| 47***01 | Kit-Repair | 1 |
| 47***02 | Reservoir | 1 |
G1-1-2 Brake Caliper, Rear
| 45***00 | Brake, Caliper Assembly | 2 |
| 45***01 | Brake, Pad & Pin Kit, Complete Axle; Was 45***05 X 2 + 47***02 X 1.Now Use Kit, 45***01 See San 07537. | 1 |
| 45***02 | Kit-Seal | 1 |
G1-2-21 Valve, Pressure Reducing
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 15***00 | Valve, Pressure Reducing | 1 |
G1-5-1 Circuit, Air Brakes, Cab
| 15***00 | Valve, Handbrake | 1 |
| 15***00 | Valve, Brake | 1 |
| 24***05 | Grommet | 1 |
G1-2-24 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 99***01 | Kit-Repair, Palm Coupling, Red/Yellow | 1 |
G1-2-20 Valve, Brake Threshold
| 13***7Z | Bolt, M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 15***00 | Valve, Brake Threshold | 1 |
G1-2-16 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-2-11 Coupling, Trailer Brake
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, Palm With Seal - Red | 1 |
| 45***01 | Cap, Dust, Red | 1 |
G1-1-1 Brake Caliper, Front
| 45***00 | Brake, Caliper Assembly | 2 |
| 45***01 | Brake, Pad & Pin Kit, Complete Axle; Use 45***05 X 2 + 47***06 X 1, San 04784 | 1 |
| 45***02 | Kit-Seal | 1 |
G1-2-17 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 15***01 | Kit-Repair, Inverse Relay Valve | 1 |
G1-2-2 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 4 |
| 15***00 | Valve, Circuit Protection; Use 15/91***00, San 04551 (15/90***00 Used Until M636217) | 1 |
G1-3-2 Valve, Brake, Hydraulic Trailer
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Trailer Brake Valve | 1 |
| 25***02 | Seal, Back-Up Ring | 1 |
G1-2-10 Valve, Check
| 15***00 | Valve, Non-Return | 1 |
| 15***01 | Kit-Repair, Non-Return Valve | 1 |
G1-3-1 Installation Circuit, Single Line, Hydraulic Trailer Braking, With Hitch
| 13***6Z | Bolt, M8 X 70 | 2 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
G1-7-1 Anti-Freeze Pump, Air Brake Circuit
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
G1-2-23 Handbrake Control, 3 Position
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-2-19 Handbrake Control, 3 Position
| 15***00 | Valve, Handbrake | 1 |
| 15***01 | Cover, Assembly | 1 |
| 15***02 | Kit, Repair | 1 |
G1-2-14 Circuit, Air Brakes, Pannier
| 15***00 | Valve, Brake Threshold | 2 |
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***00 | Reservoir, Air, 10 Litre; Use 15/90***00-15/90***00 Cannot Be Used To Re-, Place 15/90***00 Due To European Type Approval | 4 |
G1-3-4 Installation Circuit, Single Line, Hydraulic Trailer Braking, Without Hitch
| 13***6Z | Bolt, M8 X 70 | 2 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
H Steering
H1-1-4 Motor, Steering
| 13***7Z | Bolt, M10x25 | 4 |
| 13***7Z | Bolt | 8 |
| 47***00 | Gearbox, Steering; Use 47***00 | 1 |
H1-1-1 Steering, Installation
| 13***11 | Bolt, M10 X 45 Lg | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
H1-1-5 Steering Column
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***0Z | Bolt, M8x40 | 2 |
H1-1-3 Steering Shaft, Intermediate
| 13***0Z | Bolt, M8x40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 47***00 | Shaft, Intermediate Steer, Telescopic | 1 |
H1-1-2 Steering Shaft, Front
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
S Suspension
S1-1-1 Suspension, Front
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt, M10x80 | 4 |
S1-2-3 Valve, Charge
| 25***00 | Valve, Charge | 1 |
| 25***01 | Kit-Seal | 1 |
| 25***02 | Cartridge | 1 |
S1-2-2 Suspension, Rear, Linkages
| 13***8Z | Bolt, M12 X 30 | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 8 |
| 13***9Z | Bolt, M10x90mm | 8 |
S1-2-1 Suspension, Rear, Hydraulics
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
S1-2-4 Suspension, Rear, Rebound Straps
| 13***2Z | Bolt | 2 |
| 13***3Z | Bolt, M20 X 2.5 X 130mm | 2 |
| 13***3Z | Nut, M20 | 4 |
T Engine
T1-5-6 Fans,Pulleys,Fan Bel, T,Yb Build,145t/150t
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-1-2 Engine, Complete, Yb Build
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 159cc Compressor | 1 |
T1-2-8 Engine, Short, Yb Build
| 02***64 | Engine, Short | 1 |
T1-6-1 Timing Case, Camshaf, T & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-4-8 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***29 | Circlip | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-7-1 Flywheel & Housing,, Yb Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 12 |
T1-6-2 Timing Case, Auxilia, Ry Drive, Yb Build
| 02***96 | Key | 2 |
| 02***08 | Dowel | 2 |
| 02***52 | Circlip | 1 |
T1-8-1 Engine Mountings, Yb, Build
| 02***42 | Bracket | 1 |
| 02***43 | Bracket | 1 |
| 02***83 | Stud | 4 |
T1-6-2 Timing Case, Auxilia, Ry Drive, Ya Build
| 02***96 | Key | 2 |
| 02***08 | Dowel | 2 |
| 02***52 | Circlip | 1 |
T1-8-1 Engine Mountings, Ya, Build
| 02***42 | Bracket | 1 |
| 02***43 | Bracket | 1 |
| 02***83 | Stud | 4 |
T1-5-1 Fans, Pulleys, & Fan Belt, Ya Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-5-7 Fans Pulleys, & Fan Belt, Ya Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-3-2 Block Assembly, Yb Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-5-2 Fans, Pulleys, & Fan Belt, Optional, Ya Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-4-6 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***29 | Circlip | 2 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
T1-2-2 Engine, Short, Yb Build
| 02***61 | Engine, Short, 1006.6t | 1 |
| 02***63 | Engine, Short, 1006-6t,Turbo | 1 |
T1-1-4 Engine, Complete, Yb Build
| 01***00 | Engine, 1006-6t, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 1006-6t, Turbo, C/W 229cc Compressor | 1 |
T1-1-3 Engine, Complete, Ya Build
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 229cc Compressor | 1 |
T1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-5-4 Fans, Pulleys, & Fan Belt, Optional, Yb Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ya Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 6 |
T1-7-1 Flywheel & Housing,, Ya Build
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 12 |
T1-6-3 Timing Case, Camshaft & Gears, Yb Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-5-6 Fans,Pulleys,Fan Bel, T,Yb Build,1006-6t
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-5-5 Fans, Pulleys, & Fan Belts, Fixed Fan, 1.25 : 1 Ratio Australian Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-6-1 Timing Case, Camshaf, T & Gears, Ya Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
T1-5-3 Fans, Pulleys, & Fan Belt, Yb Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
T1-1-7 Engine, Complete, Yb Build
| 01***00 | Engine, 160t, Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 160t, Turbo, C/W 229cc Compressor | 1 |
T1-1-6 Engine, Complete, Yb Build
| 01***00 | Engine, 145t,Turbo, C/W 229cc Compressor | 1 |
| 01***00 | Engine, 145t, Turbo, C/W 229cc Compressor | 1 |
T1-2-6 Engine, Short, Yb Build
| 02***62 | Engine, Short | 1 |
T1-1-1 Engine, Complete, Ya Build
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 159cc Compressor | 1 |
| 01***00 | Engine, 1006-6, Nat/Asp, C/W 159cc Compressor | 1 |
T1-3-1 Block Assembly, Ya Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-2-1 Engine, Short, Ya Build
| 02***60 | Engine, Short, 1006.6 | 1 |
T2-1-4 Cylinder Head, Yb Bu, Ild, 1006-6t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Ya
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-3-1 Rocker Cover, Yb Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***39 | Cap, Oil Filler | 1 |
T2-1-2 Cylinder Head, Yb Bu, Ild, 1006-6t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-1-1 Cylinder Head, Ya Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-1-4 Cylinder Head, Yb Bu, Ild, 145t/160t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-4-1 Lifting Plates, Engi, Ne, Ya Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
T2-1-2 Cylinder Head, Yb Bu, Ild, 145t/160t
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-4-1 Lifting Plates, Engi, Ne, Yb Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
T2-2-1 Rocker Assembly, Pus, H Rods & Tappets, Yb
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-3-1 Rocker Cover, Ya Bui, Ld
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***39 | Cap, Oil Filler | 1 |
T3-2-1 Manifold, Exhaust, Ya Build
| 02***04 | Gasket | 2 |
| 02***43 | Manifold, Exhaust | 1 |
| 02***15 | Gasket | 1 |
T3-4-1 Exhaust System, Ya Build
| 02***19 | Gasket | 1 |
| 02***03 | Stud | 3 |
| 02***61 | Nut | 3 |
T3-1-2 Manifold, Induction, Yb Build
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
| 02***73 | Hose, Induction | 1 |
T3-3-2 Filter, Air, Yb Build
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-3-1 Filter, Air, Ya Build
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
T3-1-1 Manifold, Induction, Ya Build
| 02***10 | Plug | 1 |
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
T3-2-2 Manifold, Exhaust, Yb Build
| 02***04 | Gasket | 2 |
| 02***15 | Gasket | 1 |
| 02***49 | Manifold, Exhaust | 1 |
T3-4-2 Exhaust System, Yb Build
| 02***16 | Nut | 6 |
| 13***8Z | Screw, M8x30 | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Ya
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-3-1 Radiator Fittings &, Mountings, Yb Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
T4-2-1 Thermostat, Housing,, Inlet & Outlet, Yb
| 02***95 | Plug, Taper | 3 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-1-1 Pump, Water, Ya Buil, D
| 02***82 | O Ring | 1 |
| 02***84 | Seal | 1 |
| 02***85 | Cover | 1 |
T4-4-1 Radiator & Hoses, Yb, Build
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 13***3Z | Screw, M8 X 16 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
T4-1-1 Pump, Water, Yb Buil, D
| 02***82 | O Ring | 1 |
| 02***84 | Seal | 1 |
| 02***85 | Cover | 1 |
T4-4-1 Radiator & Hoses, Ya, Build
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 13***3Z | Screw, M8 X 16 | 10 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
T4-3-1 Radiator Fittings &, Mountings, Ya Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
T5-2-1 Pump, Oil, & Relief Valve, Ya Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-5-2 Cooler, Oil, & Pipework, Yb Build
| 02***08 | Spring | 1 |
| 02***16 | O Ring | 2 |
| 02***17 | O Ring | 4 |
T5-3-1 Piston Cooling Jets, Yb Build
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
T5-5-1 Cooler, Oil, & Pipework, Ya Build
| 02***08 | Spring | 1 |
| 02***16 | O Ring | 2 |
| 02***17 | O Ring | 4 |
T5-2-2 Pump, Oil, & Relief Valve, Yb Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-1-1 Sump, Oil & Fittings, , Ya Build
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***02 | Plug | 1 |
T5-4-2 Filter, Oil, Yb Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 02***96 | Gasket | 1 |
| 02***93 | Head, Oil Filter | 1 |
T5-1-1 Sump, Oil & Fittings, , Yb Build
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***02 | Plug | 1 |
T5-4-1 Filter, Oil, Ya Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***10 | Plug | 1 |
| 02***88 | Head, Oil Filter | 1 |
T6-8-1 Pump, Fuel Lift, Yb, Build
| 02***72 | Plate, Keep | 2 |
| 02***94 | Gasket | 1 |
| 02***18 | Bolt | 4 |
T6-3-1 Fuel Pipes, Injection Pump, Ya Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 2 |
T6-2-2 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 3 |
T6-1-2 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-7-1 Filter, Fuel, Yb Bui, Ld
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Ya Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 4 |
T6-4-1 Fuel Pipes, Tank To Filter, Standard, Ya Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-6-1 Filter, Fuel Sedimen, T, Ya Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-3-6 Fuel Pipes, Injection Pump, Yb Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
T6-7-1 Filter, Fuel, Ya Bui, Ld
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-3-2 Fuel Pipes, Injection Pump, Yb Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 4 |
| 02***18 | Nut | 2 |
T6-6-1 Filter, Fuel Sedimen, T, Yb Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T6-8-1 Pump, Fuel Lift, Ya, Build
| 02***72 | Plate, Keep | 2 |
| 02***94 | Gasket | 1 |
| 02***18 | Bolt | 4 |
T6-4-2 Fuel Pipes, Tank To, Filter, Optional, Ya
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-1-6 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-1-7 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-4-2 Fuel Pipes, Tank To, Filter, Yb Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Ya Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 3 |
T6-1-1 Pump, Fuel Injection, Ya Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
T6-5-2 Fuel Heater, & Fuel Feed Pipe, Yb Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 3 |
T6-2-6 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***05 | Seal | 6 |
| 02***10 | Spacer | 6 |
T7-4-1 Compressor Pipework,, Ya Build
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-5-1 Compressor, Installation, Air Conditioning
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
T7-3-1 Compressor, Air, Ya, Build
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***00 | Compressor | 1 |
T7-4-2 Compressor Pipework, 229cc
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-2-5 Turbo, Pipework, Yb Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
T7-3-2 Compressor, Air, 229cc
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***02 | Key, Woodruff | 1 |
T7-4-1 Compressor Pipework,, Yb Build
| 02***87 | Olive | 2 |
| 02***98 | Spacer | 1 |
| 02***06 | Nut | 2 |
T7-3-1 Compressor, Air, Yb, Build
| 02***40 | Bracket | 1 |
| 02***41 | Bracket | 1 |
| 02***00 | Compressor | 1 |
T7-2-2 Turbo, Heatshield, Yb Build
| 02***77 | Shield, Heat | 1 |
| 02***78 | Spacer | 2 |
| 02***16 | Nut | 2 |
T7-2-1 Turbo, Pipework, Yb Build
| 02***84 | Hose, Oil Drain | 1 |
| 02***75 | Gasket | 1 |
| 02***80 | Gasket | 1 |
T7-5-3 Compressor, Installation, Air Conditioning
| 13***1Z | Bolt, M10 X 45mm | 1 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
T7-5-2 Compressor, Installation, Air Conditioning
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
T7-6-1 Compressor, Air Conditioning
| 26***05 | Kit-Seal, & Felt Ring Assembly | 1 |
| 26***06 | Ring, Snap | 1 |
| 47***00 | Compressor, Air Conditioning; Must Be Used With 2 Off 47***49 | 1 |
T7-1-1 Turbocharger, Yb Build
| 02***09 | Shaft, & Impellor Assembly | 1 |
| 02***12 | Kit-Repair, Turbocharger | 1 |
| 02***67 | Collar, Thrust | 1 |
T8-1-1 Gasket Sets, Ya Buil, D
| 02***02 | Kit-Gasket, Top | 1 |
| 02***03 | Kit-Gasket, Bottom | 1 |
| 02***83 | Kit-Gasket, Top | 1 |
T8-2-1 Kit, Engine Overhaul
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
T8-1-1 Gasket Sets, Yb Buil, D
| 02***02 | Kit-Gasket, Top | 1 |
| 02***03 | Kit-Gasket, Bottom | 1 |
| 02***83 | Kit-Gasket, Top | 1 |
T8-2-2 Kit, Engine Overhaul, Yb Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
T8-2-3 Kit, Engine Overhaul, Yb Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 6 |
FASTRAC 125-30 serial number reference
Check the machine identification plate for the serial number; confirm applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 00635001-00635994 | JCB FASTRAC 125-30 Parts Catalogue applicability | |
| 636000–636381 | JCB Fastrac 125–185 series service manual applicability |
Frequently asked questions
What engine does the JCB Fastrac 125 use?
The JCB Fastrac 125 uses a Perkins 1000 6.0-liter turbocharged diesel engine producing 125 hp.
What is the operating weight of the JCB Fastrac 125?
The operating weight of the JCB Fastrac 125 is 14,374 lb.
What model replaced the JCB Fastrac 125?
The JCB Fastrac 125 was succeeded by the Fastrac 135, 145, 150, 155, and 185 models, which shared the same chassis and transmission architecture.
What FASTRAC 125-30 owners discuss
What engine powers the JCB FASTRAC 125-30, and what are its key specifications?
The JCB FASTRAC 125-30 is powered by a Perkins 1000 engine. This is a 6.0 L (365 cu·in) six-cylinder, liquid-cooled, turbocharged diesel engine. It produces 93.2 kW (125 hp) at 2,400 rpm and 550 N·m (405.4 ft·lb) of torque at 1,400 rpm. The bore and stroke are 100.0 mm x 127.0 mm (3.94 in x 5 in). The engine uses an electric starter.
How do owners describe the hydraulic system performance and common failures?
Owners report that the hydraulic system, particularly on earlier models, can be lacking in flow. When running hydraulic motors on one remote, using another function simultaneously may cause the system to struggle. Common hydraulic issues include leaks and failures. Users also note that the PUH (Power Unit Hitch) linkage can seize if a demount sprayer is used continuously.
What are the typical undercarriage and drivetrain wear patterns for this machine?
The Spicer joints in the drive train are known to fail, which can be expensive and may wipe out lower casings. Propshafts require regular greasing but are difficult to access. The plastic fan coupling typically lasts only 1,100 to 1,500 hours; if it fails, the fan can catch fire, potentially destroying the radiator and fan assembly. Additionally, steel pipes inside the chassis rail are prone to rapid rusting.
What electrical and sensor issues are commonly reported by operators?
Early models (1990–2000) had a reputation for electrical fires due to wiring harnesses using few wire colors, making repairs difficult. Later models feature electric spools that frequently fail and stop working, with replacement costs being high. Connectors entering the cabin are not sealed, leading to errors when the tractor is washed. Sensors and harness connectors are prone to failure, and the air conditioning system is often ineffective, causing the cab to overheat.
How is the transmission and gearbox behavior described by users?
The transmission is a synchromesh gearbox with 18 forward and 6 reverse gears. Changing gears is described as difficult, often requiring the operator to drop one or two splits depending on the load. The gearbox is considered less suitable for grain cart work compared to Vario-equipped models. The turning circle is poor, and the steering lock is not a strong point, making field maneuvering challenging.
What are the common cooling system and cab environment issues?
The engine runs hot, especially on days over 35°C. Heat from the engine cooks components under the bonnet and in the cab, including alternators, wiring, sensors, hoses, and seals. The radiator header tanks may crack open internally around 6,000 hours. The cab lacks insulation, and the plastic cab can split near the bonnet due to heat. The air conditioning is often ineffective, and the cab filter is difficult to maintain.
What should be checked when buying a used FASTRAC 125-30?
Check the plastic fan coupling for wear and replace proactively. Inspect the chassis rail steel pipes for rust. Verify the condition of the electric spools and cabin-sealed connectors. Test the air conditioning system for effectiveness. Check the PUH linkage for seizure if a demount is fitted. Ensure the radiator header tanks are intact. Verify the condition of the Spicer joints and propshafts. Have your dealer verify the brake pad calipers and park brake function, as seized calipers can start fires.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb FASTRAC 125-30. Related factory variants of the same model family:
FASTRAC 125-30
Need a specific FASTRAC 125-30 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.