JCBconstructiontelescopic handlers (loadall)
Jcb 531-70
Maintenance schedule, common problems & OEM parts breakdown
The JCB 531-70 is a compact construction telehandler (Loadall) in the 5A machine group, produced from approximately 2007 through the 2010s. It features a JCB Dieselmax naturally aspirated engine rated at 63 hp (47 kW) gross power, with a displacement of 268.6 cu in (4.4 L). Operating weight ranges from 7,825 kg (17,251 lb) to 8,320 kg (18,342 lb) depending on configuration. The 531-70 succeeded earlier 5-series models and was followed by the Stage V compliant 531-70 equipped with a 55 kW (75 hp) Dieselmax engine and DPF. Configurations include standard and European Tractor Type Approved builds, with transmission options including 4-speed powershift.
The 531-70 transitioned from Tier 3 Dieselmax engines to Stage V emissions compliance, requiring a DPF and DOC after-treatment package without DEF injection. This shift increased complexity in exhaust maintenance but improved environmental compliance. In the used market, the 531-70 remains relevant due to its robust one-piece welded chassis, U-shaped boom, and long 500-hour service intervals, which reduce downtime. Parts availability is supported by its widespread use in construction and agriculture, with common repair points including the hydraulic pump, transmission, and engine injectors.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 531-70 specifications
Engine
| Model | JCB Dieselmax Stage V (latest); JCB EcoMAX T4i/IIIB (2005–2014 series) |
| Gross Power | 55 kW (75 hp) to 81 kW (109 hp), varies by configuration/series |
| Displacement | 4.4 L (4400 cc) |
| Cylinders | 4 |
| Emissions Tier | Stage V (latest); Euro III B (2005–2014 series) |
Weights
| Operating Weight | 6.9 t (15,212 lb) to 7.06 t (15,565 lb), varies by configuration/series |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 4.99 m (16.37 ft) |
| Transport Width | 2.23 m (7.32 ft) |
| Transport Height | 2.49 m (8.17 ft) |
| Wheelbase | 2.75 m (9.03 ft) |
| Ground Clearance | 0.40 m (1.32 ft) |
Performance
| Travel Speed (Forward) | 32 km/h (19.9 mph) to 40 km/h (24.9 mph), varies by configuration/series |
| Travel Speed (Reverse) | 32 km/h (19.9 mph) to 40 km/h (24.9 mph), varies by configuration/series |
| Max Lift Height | 7.0 m (22.97 ft) |
| Max Forward Reach | 3.7 m (12.14 ft) |
| Max Lift Capacity | 3,100 kg (6,832 lb) |
| Capacity at Max Height | 2,400 kg (5,291 lb) |
| Capacity at Max Reach | 1,250 kg (2,756 lb) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 148 L (39.1 gal) |
| Hydraulic System | 113 L (29.9 gal) |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
531-70 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 12.92 litres (3.41 gal) | JCB Engine Oil (viscosity grade not specified in source text; source lists JCB branded lubricants) |
| Cooling System | 9.35 litres (2.47 gal) | Castrol Radicool SF Premix |
| Fuel Tank | 148 litres (39.1 gal) | Diesel |
| Transmission/Powertrain | Not documented for this exact serial range — verify with your dealer | JCB Optimum Transmission Fluid (universal wet brake transmission/hydraulic fluid) |
| Final Drives (each) | Not documented for this exact serial range — verify with your dealer | Not documented |
| Hydraulic System and Tank | 113 litres (29.9 gal) | JCB Hydraulic Fluid HP46 (ISO VG 46) or HP32 (ISO VG 32) |
| Axles/Differentials | Not documented for this exact serial range — verify with your dealer | Not documented |
| Grease | N/A | JCB Grease (general purpose lithium-based grease) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 531-70 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 531-70 beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor hydraulic pump behavior and DPF regeneration frequency via LiveLink telematics. Sample engine, hydraulic, axle, and final drive fluids at the 500-hour interval to establish a baseline. Check the hydraulic return filter magnet for metallic debris during every 500-hour service. Inspect the air cleaner restriction indicator and clean the dust valve regularly to prevent engine contamination. Track fuel consumption and idle time through telematics to identify inefficient operation patterns early.
Corrective & Common Repairs
Address hydraulic hose failures by inspecting for chafing and pinhole seepage at the kingpost and boom during daily checks. Replace worn boom-cylinder pin bushings measured at 1000-hour intervals, not just visually. Repair transmission issues by checking torque converter fluid and filter at 1000 hours. Fix engine starting problems by testing the alternator and starter load. Replace the water separator fuel filter if contamination is detected. Inspect the FEAD belt for wear and replace if cracked or glazed.
Overhaul & Rebuild Points
Perform structural inspection of the boom, arm, chassis, and side frames for cracking or unauthorized welding at 2000-hour intervals. Measure swing ring play on compatible variants using dial indicators. Check turbocharger shaft play, boot condition, and wastegate function on Dieselmax units during the 1000-hour service. Inspect immersed brake condition and disc wear. Evaluate injector spray patterns via diagnostic tool and replace as required to maintain engine performance and emissions compliance.
Seasonal & Environment Servicing
Switch to JCB Cold Climate Engine Oil EP5W40 for temperatures between -20°C and +50°C (-4°F to 122°F). Use JCB Engine Oil EP 15W40 for temperatures between 10°C and +50°C (14°F to 122°F). In dusty environments, clean the radiator and air cleaner dust valve more frequently. Ensure the reversing fan and radiator chaff guard are clear of debris to prevent overheating. Check the DPF auto-regeneration strategy in cold conditions to ensure proper exhaust treatment. Verify battery electrolyte levels on non-sealed units during winter prep.
531-70 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925915 | Element, Fuel Filter, Reverse Flow | Fuel system service | Check fitment → |
| 32/925950 | Element, Fuel Filter, 5 Micron | Fuel system service | Check fitment → |
| 320/07057 | Filter, Fuel | Fuel system service | Check fitment → |
| 32/917804 | Element, Air Filter, Main | Air intake service | Check fitment → |
| 32/917805 | Element, Air Filter, Safety | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
531-70 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| L071-CAN | Controller Area Network communication fault affecting boom functions | Damaged CAN wiring harness, loose connectors near boom control module, or faulty terminating resistors | Inspect CAN wiring harness and connector pins for corrosion or damage; check boom hydraulic solenoid valves |
| P2135-FA | Voltage issue with foot throttle pedal sensor | Faulty pedal position sensor or wiring harness issue | Check pedal sensor readings with a multimeter against service manual range; inspect harness |
| P160D-00 | Functional safety fault | Safety system logic error or sensor mismatch | Clear code and monitor; if persistent, verify safety interlock circuits and sensor inputs |
| D002 | Water in fuel detected | Water accumulation in fuel filter bowl or tank | Drain water from fuel filter bowl; replace fuel filters if necessary |
| P0087 | Fuel rail/system pressure too low | Fuel filter blockage or lift pump failure | Check and replace fuel filters; inspect fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor or open circuit | Inspect sensor wiring and connectors; test sensor resistance |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low oil level | Check engine oil level; test sensor output with multimeter |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Open circuit in reductant injector wiring or faulty injector | Inspect injector wiring harness and connectors; verify injector resistance |
| U0100 | Lost communication with Engine Control Module (ECM) | Battery voltage fluctuation, loose ground strap, or CAN bus interruption | Check battery voltage (must be 12.6V); inspect ground straps and CAN bus connections |
| 101 | Low transmission clutch pressure detected | Transmission fluid issue or pressure sensor fault | Check transmission fluid level and condition; inspect pressure sensor |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
531-70 attachments & work tools
Buckets
The 531-70 accepts standard telehandler buckets via the JCB Q-fit self-levelling carriage. Typical capacities for this 7-meter class range from 1.0 to 1.5 cubic meters, depending on the specific bucket profile and material density.
Forks
Pallet forks are standard equipment on the 531-70, mounted to the Q-fit carriage. The machine supports a maximum lift capacity of 3,100 kg (3.1 tons) at the fork tips, with forward reach extending to 3.7 meters.
Quick Couplers
The machine is equipped with a factory-standard hydraulic quick coupler system, specifically the JCB Q-fit self-levelling carriage with lever-operated pin locking. This system allows for rapid attachment changes without leaving the cab.
Hydraulic Options
All Loadall models feature an auxiliary hydraulic line on the boom to power attachments. Additional attachment lines are available as an option, often piped to the quick hitch for enhanced tool functionality.
Safety & Visibility
Reversing cameras and pulse radar are available as options on selected models to protect bystanders. The machine includes a low boom profile and pivot point for rearward visibility, along with side and rear-view mirrors.
Specialist Attachments
Compatible tools include the Multisweep 425 hydraulically operated sweeper and various grabs or grapples. These attachments utilize the boom's auxiliary hydraulic line for operation.
All 531-70 assemblies by section
Every catalogued assembly group for the Jcb 531-70. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-2-5 Shovel,1.25 Cu Yards, 8'Wide
| 13***1Z | Nut | 12 |
| 14***2Z | Washer | 12 |
| 51***00 | Kit, Tooth | 1 |
A1-1-2 Shovel,1.0m3
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, Without Holes | 1 |
A1-1-3 Shovel,1.2 Cu.M, 2286mm (7'6") Wide
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 2 |
| 13***01 | Nut | 1 |
A1-5-1 Tooth Guard, Bolt On
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt, 1/2" X 2.1/4" Long | 2 |
A1-1-1 Shovel, 1.0 Cu.M, With Toeplate
| 13***1Z | Nut | 16 |
| 33***88 | Tooth, Bucket | 8 |
| 53***05 | Tooth | 8 |
A3-13-1 Carriage,Manual, Manitou
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 4 |
A3-1-3 Carriage Quickhitch, Yellow
| 13***6Z | Bolt | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***4Z | Nut, Philidas Thin | 2 |
A3-4-5 Tow Hitch, Mechanical
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 4 |
A3-2-1 Carriage, Fork,Industrial, Class 2
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-70-1 Air Conditioning Kit, (Tier 2)
| 12***91 | Washer, Nylon | 12 |
| 13***7Z | Screw, M6 X 25mm Long | 6 |
| 13***1Z | Bolt | 1 |
A3-64-1 Sweeper Collector, Front Brush/Drive, 980/90508,980/90507
| 13***7Z | Screw, Hexagon M8 X 25 | 22 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 2 |
A3-63-1 Sweeper Collector, Sequence Valve, 980/90508,980/90507
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***11 | Seal, Bonded | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
A3-23-1 Large Power Grab, Kvernaland Tines
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 33***24 | Fork, Tine | 10 |
A3-5-1 Rockinger, Adaptor Plate
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***5Z | Washer, 1/2", Medium | 8 |
A3-62-2 Sweeper Collector, No Sprinkler System, 980/90507
| 14***6Z | Washer, M6 | 12 |
| 24***08 | Grommet, Blind | 8 |
| 33***85 | Plate, Filler Blanking | 1 |
A3-20-1 Fork Frame, Sub Assemblies, (Without Top Grab)
| 33***16 | Fork, Tine & Nut Assembly | 47 |
| 33***24 | Fork, Tine | 10 |
| 33***29 | Frame, Welded Assembly | 1 |
A3-4-1 Tow Hitch,Hydraulic
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
A3-7-12 Hydraulic Pin Lock, Twin,Hose Circuit, Installation,'Flat Face Couplings'
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
A3-2-9 Carriage,Pin & Cone
| 13***05 | Screw, Grub,M10 X 16 | 1 |
| 13***26 | Screw, Cap,M8 X 160 G | 1 |
| 13***8D | Capscrew | 2 |
A3-7-2 Hydraulic Pin Lock, Twin,Installation, Quickfit Carriage,'Flat Face Couplings'
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A3-12-8 Multi Shovel, 980/89656
| 13***7Z | Bolt, M6 X 30 | 2 |
| 13***0Z | Bolt, M10 X 40 | 6 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 4 |
A3-2-5 Carriage Sideshift
| 16***03 | Adapter, Male/Male | 2 |
| 45***49 | Coupling, Female, 3/4"Unf | 1 |
| 45***50 | Coupling, Quick Release,Male, 3/4"Unf | 1 |
A3-21-3 Power Grab, Loadall Q-Fit, 10 Fork & 6 Grab
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
A3-25-1 Refuse Bucket & Grab, 2.43m 1250kg, Loadall Quickfit
| 33***85 | Grab, Assembly. R/H | 1 |
| 33***87 | Grab, Assembly. L/H | 1 |
| 33***88 | Toeplate, Kit 3 Piece | 1 |
A3-60-2 Sweeper Base Unit, Sc240,No Hitch, Without Water Sprinkler
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 1/2" Bsp Female, Quick Release | 1 |
A3-7-13 Hydraulic Pin Lock, Single,Hose Circuit, "High Flow"
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
A3-13-4 Hydraulic Circuit, Manitou Carriage, Doulble,'Flat Face'Couplings
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
A3-5-10 Ladder Hitch, France, Tractor Homologation
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***7Z | Bolt | 6 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 4 |
A3-5-3 Clevis Hitch, France, Tractor Homologation
| 13***2Z | Bolt, M20 X 120mm | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-13-10 Forks & Carriage, (Manitou)
| 13***0Z | Bolt | 4 |
| 14***9Z | Washer | 4 |
| 33***65 | Plate | 2 |
A3-3-1 Guard Q/Fit Carriage
| 33***49 | Guard, Wa Load | 1 |
| 82***12 | Pin, Lynch | 2 |
| 83***67 | Tube, Wa Retention | 2 |
A3-21-1 Power Grab, Loadall Quickhitch, 8 Fork & 5 Grab
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
A3-30-1 Box Tipper, Sideways
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 33***03 | Washer, Thrust | 1 |
A3-21-5 Power Grab, Loadall Pin & Cone, 10 Fork & 6 Grab
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
A3-60-1 Sweeper Base Unit, Sc240,No Hitch, With Water Sprinkler
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 33***05 | Pin, Locking | 2 |
A3-62-1 Sweeper Collector, Sprinkler System, 980/90508
| 12***55 | Cap, Hydraulic Filler, Non Lockable; Replaced By Mss Use The Following Parts 123/0, 4930 + 70***01 Key. See San05966 | 1 |
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
A3-66-1 Sweeper Collector, Hydraulic Hoses, 980/90508,980/90507
| 61***00 | Hose, High Pressure | 1 |
| 61***00 | Hose | 1 |
| 61***29 | Hose, 1/4bsp 2450mm | 1 |
A3-2-10 Pin/Cone Carriage, Single,Installation, Hydraulic,'Flat Face'Couplings
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
A3-1-5 Carriage Quickhitch, Black
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-65-1 Sweeper Collector, Labels & Decals, 980/90508,980/90507
| 81***90 | Decal, Jcb, Insignia 375 X 300mm | 1 |
| 81***19 | Label, Arrow | 1 |
| 81***51 | Label, Sweeper Operation | 1 |
A3-2-4 Carriage,Fork, Industrial, Class 3
| 54***00 | Frame, 1500 mm | 1 |
| 54***00 | Fork, Arm, 125wx50tx1200l, Class 3b | 1 |
| 54***00 | Fork, Arm 100wx50tx1067l, Class 3b, Fork, Arm 100wx50tx1067l, Class 3b; Not Fitted On Usa Machines. All Forks Are Supplied In Matched Pairs Only And Cannot Be Replaced Individually | 1 |
A3-1-1 Carriage Quickhitch
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***4Z | Nut | 2 |
A3-3-2 Guard,Load, Q/Fit Carriage
| 54***00 | Guard, 'Q'Fit Carriage | 1 |
| 82***06 | Stop | 4 |
A3-25-2 Refuse Bucket & Grab, 2.3m 930kg, Loadall Quickfit
| 98***04 | Shovel, Refuse Single Grab, 2.3m | 1 |
A3-2-8 Carriage,Pin & Cone
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 33***81 | Guide, Hose Wa | 1 |
| 33***61 | Carriage, Wa | 1 |
A3-21-4 Power Grab, Tool-Carrier, 10 Fork & 6 Grab
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
A3-1-6 Carriage Quickhitch, Black
| 13***6Z | Bolt | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***2Z | Nut | 2 |
A3-9-1 Jib,4 Metre, Extension
| 14***02 | Screw, Self Tapping | 4 |
| 53***01 | Link, 1.25 Ton | 1 |
| 54***00 | Jib, 4 Metre Extension, Assembly | 1 |
A3-22-1 Muck Fork & Grabs, Varieties
| 33***86 | Frame, & Fork Assembly, Hardox, Loadall Q-Fit | 1 |
| 33***87 | Frame, & Fork Assembly, Hardox, Loadall Toolcarrier | 1 |
| 33***89 | Frame, & Fork Assembly, Hardox, Loadall Pin & Cone | 1 |
A3-2-3 Fork Retention Kit
| 54***01 | Link, Fork Retaining | 2 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-1-2 Carriage Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter | 2 |
A3-21-2 Power Grab, Loadall Quickhitch, 9 Fork & 6 Grab
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
A3-10-1 Crane Hook, Fork Mounted
| 15***00 | Pin | 2 |
| 22***67 | Circlip | 2 |
| 54***01 | Bracket, R.H | 1 |
A3-5-4 Rockinger Hitch
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-23-5 Muck Fork & Grab, Standard Tines
| 13***9Z | Bolt, M12x90mm | 10 |
| 13***3Z | Nut, Philedas | 10 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
A3-13-5 Hydraulic Conversion, Manitou Carriage, Installation
| 13***1Z | Bolt, M12x110 | 2 |
| 33***58 | Plate | 1 |
| 55***71 | Ram, Q-Hitch; San25657.Cwe By Mss To 33***72,33***71 &, 13***26.P Gamble/T Bland.24/01***08 | 1 |
A3-6-1 Front Hitch, Agriculture, Tractor Homologation
| 13***3D | Nut, M16 | 2 |
| 13***2D | Screw, Cap | 2 |
| 14***1Z | Washer, M16 Plain | 4 |
A3-7-11 Hydraulic Pin Lock, Single,Hose Circuit, "Flat Face"Coupling,Servo
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
A3-21-6 Power Grab
| 13***6D | Bolt, M10 X 70mm Long | 2 |
| 13***9D | Bolt | 4 |
| 13***3D | Nut, Self Lock M10 | 4 |
A3-70-2 Air Conditioning Kit, (Tie 3)
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 12***91 | Washer, Nylon | 4 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
A3-2-11 Pin/Cone Carriage, Twin,Installation, Hydraulics,'Flat Face Couplings'
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
A3-24-2 Top Grab (Profiled)
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***05 | Bolt | 1 |
A3-7-21 Hydraulic Pin Lock, Carriage,Pin & Cone
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
A3-2-50 Carriage/Fork Pin, Compatibility Chart
| 33***68 | Carriage, W.A. | 1 |
| 33***51 | Carriage, W.A. | 1 |
| 33***56 | Carriage, W.A.; San25475.Ss To 33***29.P Gamble 5/12***07 | 1 |
A3-7-4 Hydraulic Pin Lock, 'Plug In'
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
| 16***63 | Adaptor | 2 |
| 45***49 | Coupling, Female, 3/4"Unf | 1 |
A3-13-3 Hydraulic Circuit, Manitou Carriage, Single,'Flat Face'Couplings
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
A3-25-3 Fork & Grab, 2.29m 710kg, Loadall Quickhitch
| 98***09 | Fork, And Grab | 1 |
A3-7-1 Hydraulic Pin Lock, Single,Installation, Quickfit Carriage,'Flat Face Couplings'
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A3-61-1 Sweeper Collector, Canopy, 980/90508,98/90507
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 12 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 12 |
A3-24-1 Top Grab (Large), Kvernaland Tines
| 10***17 | Pin, Pivot | 2 |
| 10***37 | Pin, Pivot | 2 |
| 13***05 | Bolt | 1 |
B Bodywork, Cab, Loader End
B1-3-1 Fenders, 28"Black, Fixed Chassis
| 13***8Z | Bolt, M10 X 30 | 32 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-5-31 Pod Side Panel
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***84 | Panel, Pod Side | 1 |
B1-5-5 Diffuser Outlet
| 13***7Z | Bolt, M10x25 | 9 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 9 |
| 33***49 | Cap, Wa,Raised | 4 |
B1-7-1 Tank,Hydraulic
| 12***53 | Gauge, Sight | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 14***6Z | Washer, M6 | 8 |
B1-1-1 Chassis,Fixed
| 34***09 | Chassis, Wa Fixed | 1 |
B1-3-11 Rear Fenders,Black, Rigid,Moulded
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 8 |
| 13***3Z | Nut, Lock, M10 | 24 |
| 13***3Z | Nut, M12 | 8 |
B1-1-10 Chassis,Fixed, Variable Pump M/C
| 34***13 | Chassis, Fixed,Variable Pump | 1 |
B1-11-2 Sway Isolation, Proximity Switch
| 13***1Z | Bolt | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
B1-6-11 Cab Step, Single Step, Twin Battery
| 12***86 | Catch, Vandal Cover | 1 |
| 13***8Z | Screw, M8x30 | 4 |
| 13***5Z | Bolt, M12x20 | 4 |
B1-5-20 Engine Cover Details
| 13***1Z | Nut, M8 | 4 |
| 14***1Z | Washer | 8 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 5 |
B1-4-6 Bodywork,Rear, & Number Plate Brkt
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
B1-9-2 Counterweight, Underslung,Cab Side, Electric Servo
| 13***5Z | Bolt | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 2 |
B1-6-12 Cab, Single Step, Single Battery
| 12***86 | Catch, Vandal Cover | 1 |
| 13***9Z | Setscrew, M8x35 | 4 |
| 13***5Z | Bolt, M12x20 | 6 |
B1-3-15 Front Fenders,Black, Sway,Moulded
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 8 |
| 13***3Z | Nut, Lock, M10 | 24 |
| 13***3Z | Nut, M12 | 8 |
B1-3-2 Fenders, 500mm,Black, Fixed Chassis
| 13***8Z | Bolt, M10 X 30 | 32 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-5-35 Pod Side Panel, Field Fit, For M/C'S Without Bellyguards
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***29 | Panel, Side | 1 |
B1-13-1 Filter Guard
| 33***53 | Guard, Wa Filter | 1 |
| 82***97 | Bolt, Countersunk | 2 |
B1-11-4 Sway Isolation, Proximity Switch
| 13***9Z | Screw, M10x35mm | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 33***33 | Gasket, Proximity Switch | 1 |
B1-8-2 Mirror - Single, Tractor Homologation
| 13***1Z | Nut, High Strength, M10 | 2 |
| 13***7Z | Capscrew, Socket Head | 2 |
| 15***00 | Mirror, One Piece | 1 |
B1-6-3 Fuel Tank
| 12***39 | Strainer, Fuel, Gauze | 1 |
| 13***9Z | Bolt, M12x90mm | 4 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
B1-3-6 Fenders, 500mm Yellow, Fixed
| 13***8Z | Bolt, M10 X 30 | 32 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-6-22 Fuel Tank Guard, Twin Battery
| 33***57 | Mat, Rubber, Fuel Tank Protection | 2 |
| 33***47 | Mat, Rubber, Fuel Tank Protection | 2 |
| 33***48 | Cap, Rubber, Fuel Tank Protection | 2 |
B1-2-6 Mainframe Covers, Lift Ram,Heater, Pipe Cover,Servo
| 13***5Z | Bolt | 3 |
| 14***6Z | Washer, M6 | 3 |
| 14***04 | Screw, Self Tapping | 6 |
B1-1-4 Chassis,Sway
| 34***12 | Chassis, Sway | 1 |
B1-5-2 Engine Pod,Base, With Access Panel
| 13***7Z | Bolt, M10x25 | 6 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
B1-8-4 Mirror,Rear
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
| 33***29 | Mirror, Hemispherical; San 22587.Cwe To 33***18.Pi L04/146.13/7/06, P Gamble | 1 |
B1-3-16 Rear Fenders,Black, Sway,Moulded
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 8 |
| 13***3Z | Nut, Lock, M10 | 24 |
| 13***3Z | Nut, M12 | 8 |
B1-12-1 Belly Plates, & Guards
| 13***5Z | Setscrew, M10 X 20mm | 16 |
| 13***2Z | Bolt, Setscrew M10x50 | 8 |
| 14***1Z | Washer, 2 Ba | 10 |
B1-4-10 Rear Aux Cover
| 13***0Z | Bolt | 2 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B1-10-1 Rear Light Arms
| 12***53 | Washer, Rebound | 2 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut, M12 | 2 |
B1-10-6 Blanking Plate, Light Arm
| 33***76 | Plate, Light Mtg Blanking | 1 |
| 41***51 | Sealant, Threadlock, 50ml | 1 |
| 81***71 | Gasket, Light Arm Mounting | 1 |
B1-4-7 Bodywork Rear, Hydraulic Tow Hitch
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
B1-8-6 Mirror,Tow Hitch
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***5Z | Bolt | 2 |
B1-6-16 Cab, Step, Twin,(For Gear Pump Chassis)
| 12***91 | Washer, Nylon | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 8 |
B1-1-11 Chassis,Fixed, Electric Servo, Variable Pump
| 34***41 | Chassis, Fixed | 1 |
B1-6-14 Cab Step, Twin Step, (Tractor Homologation)
| 12***91 | Washer, Nylon | 4 |
| 13***8Z | Screw, M8x30 | 8 |
| 13***5Z | Bolt, M12x20 | 6 |
B1-4-2 Light Brackets, & Mountings, Tractor Build
| 13***0Z | Bolt, M8x40 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B1-5-50 Panel, Side, Pod (Excess Dust Application)
| 33***70 | Panel, Side Pod | 1 |
| 92***36 | Strip, Edging 125mm Long | 1 |
B1-5-10 Engine Pod,Cover, Installation
| 12***35 | Joint, Ball | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***0Z | Bolt, M8x40 | 4 |
B1-1-3 Chassis,Fixed
| 34***10 | Chassis, Fixed | 1 |
B1-6-10 Cab Step, Single Step, Single Battery
| 12***86 | Catch, Vandal Cover | 1 |
| 13***9Z | Setscrew, M8x35 | 4 |
| 13***5Z | Bolt, M12x20 | 6 |
B1-7-4 Tank,Hydraulic
| 12***53 | Gauge, Sight | 1 |
| 13***8Z | Screw, M6 X 30mm Long | 16 |
| 14***6Z | Washer, M6 | 16 |
B1-4-9 Hydraulic Hitch, Electric Servo
| 13***6Z | Bolt, M20 X 70 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
B1-2-1 Chassis Cover Plates
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***7Z | Bolt, M10x25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
B1-5-3 Engine Pod,Base, Airflow, Tractor Build
| 13***3Z | Screw, M6x16 | 4 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
B1-6-2 Fuel Tank
| 12***39 | Strainer, Fuel, Gauze | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***1Z | Bolt, M16 X 220mm | 2 |
B1-2-10 Electric Servo, Chassis Valve Covers
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***8Z | Bolt, M10 X 30 | 3 |
B1-2-5 Mainframe Covers, Lift Ram & Valve Blk, & Front Pod Quilt
| 13***5Z | Bolt | 5 |
| 14***1Z | Washer, 2 Ba | 5 |
| 14***04 | Screw, Self Tapping | 6 |
B1-6-15 Cab Step, Twin Step, (Tractor Build)
| 12***91 | Washer, Nylon | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 8 |
B1-4-1 Light Brackets, & Mountings
| 13***0Z | Bolt, M8x40 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B1-5-1 Engine Pod,Base, No Access Panel
| 13***7Z | Bolt, M10x25 | 6 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
B1-5-11 Engine Pod,Cover, Installation, Non-Noise
| 12***35 | Joint, Ball | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***0Z | Bolt, M8x40 | 4 |
B1-6-21 Fuel Tank Guard, Single Battery
| 33***57 | Mat, Rubber, Fuel Tank Protection | 2 |
| 33***47 | Mat, Rubber, Fuel Tank Protection | 2 |
| 33***48 | Cap, Rubber, Fuel Tank Protection | 2 |
B1-8-1 Rh Mirror-Single
| 13***2Z | Nut, Lock | 1 |
| 13***3Z | Nut, M16 | 1 |
| 14***6Z | Washer | 1 |
B1-7-2 Tank, Hydraulic, Servo
| 13***8Z | Screw, M6 X 30mm Long | 16 |
| 14***6Z | Washer, M6 | 16 |
| 32***00 | Strainer, Suction | 1 |
B1-20-1 Chassis Grommets, Location
| 82***10 | Grommet | 6 |
| 82***70 | Grommet | 6 |
| 82***89 | Grommet | 1 |
B1-4-5 Bulkhead Plates
| 13***0Z | Bolt, M8x40 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B1-3-3 Fenders, Black, Fixed & Sway
| 13***8Z | Bolt, M10 X 30 | 32 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-11-1 Steer Sensor, Installation
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 5 |
| 16***82 | Bracket, Rear Steer Sensor | 1 |
B1-5-4 Engine Pod Base, Airflow, Tractor Build
| 13***3Z | Screw, M6x16 | 4 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
B1-9-1 Counterweight, Underslung,Cab-Side
| 13***5Z | Bolt | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 2 |
B1-3-5 Fenders, Yellow, Fixed & Sway
| 13***8Z | Bolt, M10 X 30 | 32 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-8-3 Hemispherical Mirror, Front Rh
| 33***75 | Mirror, Hemispherical, (Cpt With Fasteners); San 22587.Cwe To 33***18.Pi L04/146.13/7/06, P Gamble | 1 |
| 33***09 | Clamp, Uni | 1 |
| 33***18 | Mirror, Hemispherical | 1 |
B1-11-3 Sway Isolation, Proximity Switch
| 13***0Z | Bolt, M8x40 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 33***27 | Bracket, Boom Position | 1 |
B1-1-12 Chassis Fixed, Electric Servo, Variable Pump
| 34***39 | Chassis, Fixed | 1 |
B1-5-21 Engine Cover Details, Non-Noise
| 13***1Z | Nut, M8 | 4 |
| 14***1Z | Washer | 8 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 5 |
B1-3-4 Fenders, 28"Yellow, Fixed
| 13***8Z | Bolt, M10 X 30 | 32 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-3-10 Front Fenders,Black, Rigid,Moulded
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 8 |
| 13***3Z | Nut, Lock, M10 | 24 |
| 13***3Z | Nut, M12 | 8 |
B1-8-5 Rh Mirror,Italy
| 13***2Z | Nut, Lock | 1 |
| 13***3Z | Nut, M16 | 1 |
| 14***6Z | Washer | 1 |
B1-1-2 Chassis,Sway
| 34***11 | Chassis, Wa Sway | 1 |
B1-6-1 Fuel Tank, And Fuel System, Installation
B2-5-2 Canopy, Internal Parts, Covers,Brackets Etc
| 16***33 | Moulding, Abi Ga Rear Storage | 1 |
| 16***03 | Duct, Abi Ga | 1 |
| 16***07 | Moulding, Abi Ga Instrument, Delux Smoking | 1 |
B2-2-7 Rear Window,Hinged, Heated
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***08 | Hinge, Plastic | 2 |
B2-2-1 Glazing,Standard
| 16***54 | Strip, Mounting, 20mm X 10mm X 6mm | 4 |
| 82***00 | Glass, Lower Door, (Jcb Insignia) | 1 |
| 82***01 | Glass, Upper Door | 1 |
B2-1-10 Roof Moulding, Yellow
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 14***6Z | Washer, M6 | 6 |
B2-3-1 Door,Upper
| 33***47 | Hinge, Block, Assembly | 2 |
| 33***39 | Seal, Adhesive,Upper/Sides; San 22594.Ss To 33***96.Pi K05/136a, P Gamble | 1 |
| 33***48 | Handle, Door | 1 |
B2-2-3 Glazing,Standard, Heated
| 16***54 | Strip, Mounting, 20mm X 10mm X 6mm | 4 |
| 70***78 | Switch, Heated Front Window | 1 |
| 70***00 | Switch, 12v | 1 |
B2-14-1 Emergency Hammer
| 14***02 | Screw | 2 |
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
B2-5-1 Cab,Internal Parts, Covers,Brackets,Etc
| 16***33 | Moulding, Abi Ga Rear Storage | 1 |
| 16***02 | Vent, Abi Cab Assembly | 1 |
| 16***11 | Mounting, Pressing G.A. | 1 |
B2-1-13 Roof Moulding,Black, With Air-Con
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***0Z | Screw | 6 |
| 13***3Z | Screw, M6x16 | 4 |
B2-10-6 No Sun Blind, Construction Build
| 33***70 | Cover, Cable,Construction | 1 |
| 33***45 | Cover, Top | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 2 |
B2-5-8 Lower Control, Cab/Canopy,Air Vents
| 30***86 | Vent, Air, (Rectangular) | 2 |
| 33***74 | Vent, Air(76.5mm Dia.Hole) | 5 |
| 33***49 | Moulding, Centre Duct | 1 |
B2-4-15 Guards,Roof
| 33***22 | Boot, Rubber | 2 |
| 33***56 | Guard, Wa Roof | 1 |
| 82***29 | Washer, M8 Black | 6 |
B2-6-1 Cab Mirror External
| 13***3Z | Screw, M6x16 | 1 |
| 14***6Z | Washer, Spring | 1 |
| 16***59 | Mirror, Assembly (Cab) | 1 |
B2-1-12 Roof Moulding,Black
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 6 |
| 14***6Z | Washer, M6 | 6 |
B2-2-5 Rear Window,Hinged
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***08 | Hinge, Plastic | 2 |
B2-9-2 Seat,Adjustable Back
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-9-15 Seat Pod Support, For 40/911135/6
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***7D | Screw, M6 X 25mm | 4 |
| 14***9D | Washer, M12 | 2 |
B2-3-5 Door,Lower Steel
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***6Z | Washer, M6 | 4 |
B2-7-1 Underseat Storage
| 33***88 | Tray, Storage Underseat | 1 |
B2-5-3 Cab,Internal Parts, Covers,Brackets,Etc
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***1Z | Washer | 1 |
B2-4-10 Guards,Windscreen
| 33***57 | Guard, Wa Screen | 1 |
| 82***29 | Washer, M8 Black | 8 |
| 82***41 | Screw, Set, M8 X 25, Black | 4 |
B2-9-1 Seat,Fixed Back
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-1-1 Cabs
| 12***40 | Plug, Blanking, 30mm | 6 |
| 14***83 | Hook, Coat | 1 |
| 16***50 | Frame, Cab,Painted & Sealed | 1 |
B2-9-6 Seat,Adjustable Back, 3"Belt
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-5-10 Floor Mats
| 33***52 | Mat, Floor | 1 |
| 33***53 | Plate, Kick | 1 |
| 33***45 | Housing, Floor Conduit | 1 |
B2-9-4 Seat,Air Suspension, Heated
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 14***7Z | Washer, Spring | 6 |
B2-9-11 Seat Air Suspension, Electric Servo, Heated
| 13***7D | Setscrew, M8x25 | 6 |
| 14***7D | Washer, M8 Plain | 6 |
| 14***7D | Washer, M8 Spring | 6 |
B2-9-3 Seat,Air Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 14***7Z | Washer, Spring | 6 |
B2-10-5 Sunblind Roof
| 16***38 | Panel, Abi Trim, Roller Blind | 1 |
| 16***39 | Panel, Trim Abi, No Sunblind | 1 |
| 33***37 | Hook, Roller Blind | 6 |
B2-4-1 Cab Parts,External
| 12***40 | Plug, Blanking, 30mm | 8 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
B2-9-7 Seat,Fixed Back, 3"Belt
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-1-11 Roof Moulding, Yellow,Air-Con
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***0Z | Screw | 6 |
| 13***3Z | Screw, M6x16 | 4 |
B2-3-2 Door,Lower
| 13***3D | Setscrew | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***6D | Washer, M6 Plain | 4 |
B2-10-2 Arm Rest Support
| 16***78 | Arm Rest Support Abi | 1 |
| 33***99 | Plate, Arm Rest | 1 |
| 33***78 | Pad, Arm Rest; S/Sd To 16***78.San 14664.Pi Lo03/187., P Gamble 05/11***03. | 1 |
B2-1-2 Canopy
| 12***40 | Plug, Blanking, 30mm | 8 |
| 16***55 | Frame, Cab,Painted & Sealed | 1 |
| 16***54 | Strip, Mounting, 20mm X 10mm X 6mm | 1 |
B2-9-10 Seat-Air Suspension, Electric Servo
| 13***7D | Setscrew, M8x25 | 6 |
| 14***7D | Washer, M8 Plain | 6 |
| 14***7D | Washer, M8 Spring | 6 |
B3-7-1 Pads,Boom Wear
| 13***2Z | Bolt | 2 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 16 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 4 |
B3-10-1 Guard,Trash, Inner Boom,Front
| 13***8Z | Bolt, M12 X 30 | 2 |
| 14***9Z | Washer | 1 |
| 16***62 | Guard, Trash | 1 |
B3-1-2 Booms,Inner,Outer
| 13***3Z | Nut | 2 |
| 15***55 | Plate, Qr Coupling Mounts, Boom Nose | 1 |
| 16***23 | Lever, Crowd | 1 |
B3-14-1 Boom Back Sensor, 1st Aux, Australian/New Zealand
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***7Z | Screw | 2 |
B3-6-2 Boom,Pivot Pins &, Bush Locations
| 10***77 | Pin, Pivot, 537mm | 1 |
| 13***2Z | Bolt, M12 X 50mm | 3 |
| 13***4Z | Bolt, M12 X 60mm | 1 |
B3-3-1 Indicator, Boom Angle
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***6Z | Bolt, M8 X 70 | 1 |
| 13***1Z | Nut, M8 | 1 |
B3-20-1 Boom, Guards Etc, Wastemaster
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B3-12-2 Chain Carrier, 2nd Auxiliary
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Setscrew, M8x35 | 4 |
B3-14-2 Boom Back Sensor, 2nd Aux, Australian/New Zealand
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***7Z | Screw | 2 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
B3-7-2 Pads,Boom Wear
| 13***2Z | Bolt | 2 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 16 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 6 |
B3-12-1 Chain Carrier, 2nd Auxiliary
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Setscrew, M8x35 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B3-1-1 Booms,Inner,Outer
| 13***3Z | Nut | 2 |
| 15***09 | Guide, Hose | 1 |
| 15***55 | Plate, Qr Coupling Mounts, Boom Nose | 1 |
B3-14-3 Lcs Proximity Switch, Rear Chassis, Australian/New Zealand
| 13***9Z | Screw, M10x35mm | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 33***66 | Switch, Proximity | 2 |
B3-14-4 Lcs Proximity Switch, Rear Chassis, Australian/New Zealand
| 13***0Z | Bolt, M8x40 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 33***66 | Switch, Proximity | 2 |
B3-9-1 Boom,Lever & Link
| 16***23 | Lever, Crowd | 1 |
| 16***30 | Link, Tipping | 1 |
| 80***26 | Bearing, Liner, 50mm Pivot Bore | 2 |
B3-20-10 Boom, Guards Etc, Underguard Wastemaster
| 13***07 | Nut, Weld | 2 |
| 33***16 | Underboom Guard | 1 |
| 33***71 | Spacer | 2 |
B3-6-1 Boom,Pivot Pins &, Bush Location
| 10***77 | Pin, Pivot, 537mm | 1 |
| 13***4Z | Bolt, M12 X 60mm | 1 |
| 13***9Z | Bolt, M12x90mm | 1 |
B3-8-1 Electric Servo, Boom Common Parts
| 13***2Z | Bolt | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
B5-6-5 Grommets
| 24***05 | Grommet, Blind, 12.7mm | 1 |
| 82***06 | Grommet | 1 |
| 82***10 | Grommet | 5 |
B5-7-1 Safety Strut
| 12***00 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 16***20 | Strut | 1 |
B5-4-5 Fire Extinguisher
| 16***83 | Extinguisher, Fire | 1 |
| 82***83 | Screw, M6 X 25 | 2 |
| 82***35 | M6 Caged Nut | 2 |
B5-5-2 Flip Charts, 531-70 Etc, Usa
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 33***35 | Retainer, Wa | 1 |
B5-2-1 Decals, 531-70 Etc
| 33***28 | Label, 531-70 Agri Xtra, 115x420 | 1 |
| 33***50 | Decal, Multi-Warning | 1 |
| 33***53 | Decal, Warning Label | 1 |
B5-6-1 Toolkit
| 33***97 | Bar, Telescopic Tommy, 3 Stage | 1 |
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***35 | Key, Carriage | 1 |
B5-5-4 Flip Charts, 541-70 Etc, Usa
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 33***35 | Retainer, Wa | 2 |
B5-5-1 Flip Charts, 531-70 Etc, R.O.W.
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 33***45 | Label, Std Forks/Tyres, Aus/Nz | 1 |
B5-2-2 Decals, 531-70 Etc
| 81***87 | Decal, Tie Down (Chain) | 1 |
| 81***03 | Label, Sling Point | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
B5-2-20 Decals, Cab Waist Band
| 81***32 | Decal, 120-4 | 1 |
| 81***33 | Decal, 120-5 | 1 |
| 81***34 | Decal, Industrial Special | 1 |
B5-1-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-7-2 Safety Strut
| 12***00 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 16***39 | Strut, Safety | 1 |
B5-7-3 Safety Strut, Variable Pump, & Electric Servo
| 12***00 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 16***23 | Bolt, Support Clamp W.A. | 1 |
B5-5-3 Flip Charts, 541-70 Etc, R.O.W
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 33***36 | Label, Sway/Non Sway, Operating | 1 |
B5-2-4 Decals, 541-70 Etc
| 81***87 | Decal, Tie Down (Chain) | 1 |
| 81***03 | Label, Sling Point | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
B5-2-3 Decals, 541-70 Etc
| 33***51 | Label, 541-70 Agri Xtra, 115x420 | 1 |
| 33***50 | Decal, Multi-Warning | 1 |
| 33***53 | Decal, Warning Label | 1 |
B5-10-1 Boom Restraint, Traffic
| 15***83 | Boom, Transport Restraint | 1 |
B6-4-1 Sun Visor Kit, German
| 16***38 | Panel, Abi Trim, Roller Blind | 1 |
| 33***37 | Hook, Roller Blind | 6 |
| 33***24 | Ring, Buffer | 2 |
C Electrics-Machine, Cab & Engine
C1-4-10 Earthing, Engine & Chassis
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
C1-10-2 Light,Rear, Combination,Rh Dip, Fog & Reverse
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
| 70***74 | Lens, Reverse | 1 |
C1-1-2 Mainframe, Electrical Layout, Servo
| 13***8Z | Bolt, M10 X 30 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 26***00 | Clip | 1 |
C1-17-3 Joystick, Twin Aux
| 70***32 | Control, Joystick Top 2 Auxiliary | 1 |
| 72***68 | Deutsch Dt Mounting Clip, 8 Way | 1 |
| 81***75 | Label, Flip Chart, Twin Auxiliary | 1 |
C1-15-2 Reverse Alarm, 6 Speed
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***0Z | Bolt, M12x40 | 2 |
C1-19-1 No Road Light Kit, Usa Only
| 70***65 | Blank | 3 |
| 71***22 | Alarm, Reverse | 1 |
| 71***03 | Plug, Harness Blanking, 6-Way, Sealed | 2 |
C1-5-10 Battery, Fixings
| 14***1Z | Washer, Plain | 2 |
| 16***77 | G.A. | 1 |
| 33***26 | Clamp, Wa Battery | 1 |
C1-6-1 Fusible Link Box, Assembly
| 33***72 | Bracket, Wa; San 20209.33***32 S/S To 33***52.10/02/04, Pi L03/259.P Gamble | 1 |
| 71***00 | Maxi Fuse 60amp | 1 |
| 71***77 | Box, Fuselink, Plug 72***09, 72***08, Terminal 72***78 | 1 |
C1-1-1 Mainframe, Electrical Layout
| 33***01 | Harness, Chassis | 1 |
| 70***12 | Switch, Proximity | 1 |
| 70***14 | Switch, Proximity | 1 |
C1-10-1 Light,Rear, Combination,Lh Dip, Fog & Reverse
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
| 70***74 | Lens, Reverse | 1 |
C1-2-2 Cab Harness, Electrical Layout, Servo
| 13***1D | Setscrew | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 33***48 | Channel, Conduit | 1 |
C1-17-5 Joystick, Twin Aux, Electric Servo
| 70***99 | Handle, Joystick,2 Auxiliary; Was Ref. R908352089 D.Jackson 20/08/07 | 1 |
| 72***68 | Deutsch Dt Mounting Clip, 8 Way | 1 |
| 81***93 | Label, Flip Chart 2 Auxiliary, Man Joystick | 1 |
C1-7-1 Inclinometer, Lev-O-Gauge
| 70***00 | Gauge, Inclinometer/Level | 1 |
C1-17-2 Joystick, Single Aux
| 70***31 | Control, Joystick,Top 1 Auxiliary | 1 |
| 72***68 | Deutsch Dt Mounting Clip, 8 Way | 1 |
| 81***74 | Label, Flip Chart, Single Auxiliary | 1 |
C1-5-5 Battery Isolator
| 70***00 | Switch, Isolator 150a 24v Dc, (Supplied Cpl With Key 70***01) | 1 |
| 70***01 | Key, Isolator Switch, (To 70***00) | 1 |
| 71***62 | Lead, Battery-Ve(Isolator) | 1 |
C1-5-6 Battery Isolator, Heavy Duty
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C1-20-1 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
| 71***00 | Plug, Male, Junior Timer | 0 |
C1-17-4 Joystick, Single Aux, Electric Servo
| 70***98 | Control, Joystick Top 1 Auxiliary, (Fwd & Rev Rocker Switch) | 1 |
| 72***68 | Deutsch Dt Mounting Clip, 8 Way | 1 |
| 81***90 | Label, Flip Chart 1 Auxiliary, Man Joystick | 1 |
C1-8-2 Worklights,Boom, "Oval"Style
| 13***7Z | Screw, M6 X 25mm Long | 3 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
C1-4-2 Light,Head, Rh Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***56 | Light, Head Assembly, Right Hand | 1 |
C1-15-1 Alarm Reverse
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
| 71***14 | Plug, Male,8 Way, Deutsch | 1 |
C1-16-1 Horn,Single Tone, Front
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C1-4-1 Light,Head, Lh Dip
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
| 70***19 | Light, Head, Lh Side, Lh Dip | 1 |
C1-8-1 Worklights,Boom
| 13***9Z | Bolt | 3 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 2 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 2 |
C1-10-3 Light,Rear, Combination, Twin Reverse
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
| 70***74 | Lens, Reverse | 2 |
C1-9-1 Light Reflectors
| 14***02 | Screw, No 8x1/2" | 6 |
| 70***00 | Reflector, Amber | 5 |
| 70***00 | Reflector, Red | 2 |
C1-5-3 Battery & Fixings, Heavy Duty, Uk & Spain
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 14***1Z | Washer, Plain | 2 |
| 14***4Z | Washer, Spring | 2 |
C1-4-20 Headlight Guards
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
C1-12-1 Electrics,Trailer
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
| 14***05 | Washer, 'P' | 1 |
C1-17-1 Control Levers
| 70***43 | Decal, Rocker Switch Top, Joystick Switch | 1 |
| 70***01 | Switch, 12v, Switch, 12v; Push Power. Use With Gear Pump M/C'S. Only. | 1 |
| 70***24 | Lever, Joystick - 1 Auxiliary | 1 |
C1-14-1 Light,Number Plate
| 24***12 | Grommet, Panel Hole Dia 29mm, Panel Thk 2.8-3.5mm | 2 |
| 70***27 | Light, Number Plate | 2 |
| 72***67 | Deutsch Dt Mounting Clip | 2 |
C1-5-1 Battery & Fittings
| 10***00 | Clamp | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 14***1Z | Washer, Plain | 2 |
C1-2-1 Cab Harness, Electrical Layout
| 13***1D | Setscrew | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 33***48 | Channel, Conduit | 1 |
C2-12-1 Engine Harness, Installation Mt3
| 12***47 | Clip, Cable | 4 |
| 24***07 | Grommet | 4 |
| 26***00 | Clip, Harness | 3 |
C2-5-2 Grid Heater Relay, Installation Crt3, Turbo, Charge Air Cooler Builds
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
C2-6-1 Engine Immobiliser, 12.Volt
| 16***01 | G.A, Immobiliser | 1 |
| 32***93 | Spring, Immobiliser | 1 |
| 32***94 | Spacer, Immobiliser | 1 |
C2-11-1 Switches & Senders, 12volt Mt3
| 17***02 | Seal, Ring | 1 |
| 32***38 | Switch, Engine Oil Pressure | 1 |
| 32***57 | Seal, Bonded | 1 |
C2-15-2 Grid Heater Relay, Installation Mt3, Charge Air Cooled Builds
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
C2-4-1 Alternator, 14volt - 95amp
| 13***8Z | Screw, Star Drive, M10 X 30 | 1 |
| 13***2Z | Bolt, Star Drive, M10 X 120 | 1 |
| 32***10 | Alternator, 14v-95amp | 1 |
C2-15-1 Grid Heater Relay, Installation Mt3
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M8 X 25, Flange Reduced Hex | 1 |
C2-7-1 Engine Block Heater, 120v
| 32***50 | Heater, Cylinder Block, 1000w - 120v Mains | 1 |
| 32***53 | Washer, Copper Sealing | 1 |
| 32***82 | Kit-Heater, Engine Block, 120v | 1 |
C2-5-1 Grid Heater Relay, Installation Crt3
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M8 X 25, Flange Reduced Hex | 1 |
C2-3-1 Starter Motor, 12.Volt
| 13***8Z | Screw, Star Drive, M10 X 30 | 3 |
| 32***35 | Motor, Starter | 1 |
| 32***52 | Motor, Starter | 1 |
C2-9-1 Power Relay & Fuses, Crt3
| 16***39 | G.A, Header Tank | 1 |
| 71***05 | Fuse, 10 Amp, Fuse, 10 Amp; In Line Fuses In Roof Harness For Auxiliary Sockets. Access Via Draft Control Panel. | 4 |
| 71***52 | Relay, Grid Heater | 1 |
C2-7-2 Engine Block Heater, 240v
| 32***53 | Washer, Copper Sealing | 1 |
| 32***59 | Element, Engine Block Heater, 230v | 1 |
| 32***60 | Kit-Block Heater, Engine, 230v | 1 |
C2-1-1 Switches & Sensors, 12volt Crt3
| 13***8Z | Bolt, M8 X 30, Flange Reduced Hex | 2 |
| 32***46 | Switch, Oil Pressure | 1 |
| 32***55 | Sensor, Temperature | 1 |
C2-2-1 Engine Harness, Installation Crt3
| 12***47 | Clip, Cable | 4 |
| 24***07 | Grommet | 4 |
| 26***00 | Clip, Harness | 3 |
C3-16-3 Air-Con Installation
| 82***92 | Tie, Cable | 2 |
C3-12-2 Beacon,Rotating, Amber,Hazard Warning
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***00 | Beacon, 12v, (155mm Tall) | 1 |
C3-4-10 Control Joystick, Electric Servo, Single Aux,Installation
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-2-6 Rear Wiper
| 25***03 | Jet, Screen Washer | 1 |
| 32***56 | Filter, Washer Pump; San 22886.Cwe 32/92***76.Supp Updated Their, Tooling.So Changed Their Pt No.P G,26/10/06 | 1 |
| 32***76 | Filter, Washer Pump | 1 |
C3-8-3 Relays & Fuses, 6 Speed,Roof Air-Con
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 16***63 | Mounting, Abi,Relay.Standard, Tier 3 | 1 |
C3-16-2 Air-Con Heater, Circuit
| 13***0Z | Bolt, M8x40 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
C3-13-1 Speedo,Installation
| 33***38 | Panel, Trim, Rh A Pillar | 1 |
| 33***96 | Bracket, Speedo | 1 |
| 33***49 | Bracket, Wa, Lmi + Speedo | 1 |
C3-8-2 Relays & Fuses, 4 Speed,Roof Air-Con
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 16***63 | Mounting, Abi,Relay.Standard, Tier 3 | 1 |
C3-6-3 Manual Steer, Lh Switch Plate
| 33***38 | Lh Switch Plate, Manual Steer Mode | 1 |
| 81***15 | Gasket, Left Hand Switch Plate | 1 |
| 82***21 | Screw, Button Head M6x20, Stainless | 2 |
C3-16-4 Air-Con Hoses
| 64***80 | Hose, Air Conditioning, Reciever Drier To Seal Plate | 1 |
| 64***81 | Hose, Air Conditioning, Reciever Drier To Condenser | 1 |
| 64***82 | Hose, Air Conditioning, Seal Plate To Condenser (Comp/Feed) | 1 |
C3-2-23 Washer/Wiper Bottle, Option
| 25***03 | Jet, Screen Washer | 1 |
| 33***04 | Tube, Split, Conduit | 1 |
| 33***68 | Bottle, Screenwash | 1 |
C3-16-26 Roof Condenser Assy, Air-Con
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-17-10 No Heater Build
| 13***3Z | Screw; Replaces 69***21 | 3 |
| 14***1Z | Washer, 2 Ba | 3 |
| 33***72 | Plate, Heater Blank | 1 |
C3-9-6 Worklights,Rear
| 70***03 | Bulb, Dip | 1 |
| 70***77 | Light, Working, Rh - 12v | 1 |
| 70***78 | Light, Working, Lh - 12v | 1 |
C3-5-1 Indicator,Safe Load
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***0Z | Screw, M10 X 40, High Tensile | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-18-1 Fan,Cab Cooling, Optional
| 33***12 | Plate, Fan Retainer | 1 |
| 71***06 | Fuse, 15 Amp, Fuse, 15 Amp; C3 - Thermostart. On Fastrac 185ti From M636--- - Provides Ether Start Circuit Protection. | 1 |
| 71***00 | Fan, 12 Volt; Replaced By 71***40, See San 10523 | 1 |
C3-5-2 No Safe Load, Indicator Fitted
| 33***15 | Pillar, Trim, A-Post,Cab | 1 |
| 34***19 | Panel, Trim,Rh.A Pilar, Construction | 1 |
| 71***01 | Plug, Harness Blanking, 2-Way, Sealed | 1 |
C3-16-44 Condenser, Air-Con,Lsv, Tier 3 Mech Engine
| 12***91 | Washer, Nylon | 8 |
| 12***55 | Handle | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
C3-16-24 Air-Con Hoses, Roof
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 64***32 | Hose, Air Conditioning | 1 |
| 64***33 | Hose, Air Conditioning | 1 |
C3-2-25 Tool Rack Option, (For Washer Option)
| 13***3Z | Screw, M6x16 | 2 |
| 33***52 | Rack, Tool Wa | 1 |
| 82***23 | Clip | 2 |
C3-1-12 Immobiliser, Installation
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***2Z | Nut, Lock | 1 |
C3-9-2 Roof Lining, With Interior Light, With Speakers
| 16***25 | Panel, Roof Lining & Light, With Speakers Abi | 1 |
| 33***56 | Liner, Roof,For Speakers | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
C3-8-4 Relays & Fuses, 6 Speed
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 16***63 | Mounting, Abi,Relay.Standard, Tier 3 | 1 |
C3-14-1 Ashtray & Lighter
| 33***81 | Ashtray | 1 |
| 33***81 | Plate, Ashtray Retaining | 1 |
| 60***3Z | Screw, Countersunk | 2 |
C3-2-10 Roof Wiper
| 15***00 | Connector, 'T' Piece | 1 |
| 23***15 | Motor, Assembly, Wiper | 1 |
| 24***03 | Grommet | 1 |
C3-6-20 Variable Pump, Controller, Installation
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-1-5 Cab Electrics, 6 Speed
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
| 33***09 | Fuse & Relay Deca | 1 |
C3-16-8 Air Con,Condenser, Tier 3 Mech Engine
| 12***91 | Washer, Nylon | 8 |
| 12***55 | Handle | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
C3-7-1 Assorted Cab Fixings, Cable Ties,Etc
| 13***2Z | Nut | 2 |
| 14***02 | Screw, No 8x1/2" | 12 |
| 15***01 | Seal, Cover | 1 |
C3-2-2 Front Wiper, Two Speed
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 32***56 | Filter, Washer Pump; San 22886.Cwe 32/92***76.Supp Updated Their, Tooling.So Changed Their Pt No.P G,26/10/06 | 1 |
C3-4-3 Switch Column, Kickdown Option
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
C3-16-6 Air-Con,Condenser
| 12***91 | Washer, Nylon | 12 |
| 13***7Z | Screw, M6 X 25mm Long | 6 |
| 13***1Z | Bolt | 1 |
C3-9-7 Worklights,"Oval", Front & Rear
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
C3-16-17 Air-Con, Roof Pipes
| 13***5Z | Bolt | 1 |
| 13***2Z | Screw, M6 X 50 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-16-12 Switches, Air-Con Controls
| 30***23 | Gasket; San 14746,P Gamble.Original Supp No 01***69., J Terry Says 01***82 Is Correct.(Bergstrom) | 1 |
| 30***24 | Switch, 4 Position; San 14746,P Gamble,25/11***3c, Superseded By 30/92***54 D.Jackson San22821 | 1 |
| 30***25 | Plate, Switch; San 14746.P Gamble.25/11***03.Original Supp, No Wrong.Bergstrom(J Terry)Says 01***74 | 1 |
C3-16-45 Receiver Drier, Air-Con,Lsv, Tier 3 Mech Engine
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
C3-4-11 Control Joystick, Electric Servo, Twin Aux,Installation
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-6-10 Ecu Unit,Shiftmaster, Flowshare,4 Speed
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-2-1 Front Wiper, Single Speed
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 32***56 | Filter, Washer Pump; San 22886.Cwe 32/92***76.Supp Updated Their, Tooling.So Changed Their Pt No.P G,26/10/06 | 1 |
C3-17-3 Heater Installation
| 24***07 | Grommet, Blind, 17.5mm Dia. | 1 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 1 |
C3-6-11 Ecu Unit, Shifmaster,6 Speed
| 13***7Z | Bolt | 3 |
| 13***3Z | Nut | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 6 |
C3-17-2 Heater Circuit
| 13***9Z | Setscrew, M8x35 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 64***28 | Hose, Heater 16x1702mm | 1 |
C3-1-20 Lmi/Lcs Switches, Australia/Nz
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 14***05 | Washer, 'P' | 2 |
| 33***66 | Unit, Load Control,Engine Control Unit | 1 |
C3-16-1 Air Con Heater Unit
| 13***8Z | Screw, M8x30 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 14***7Z | Washer, Spring | 3 |
C3-1-1 Cab, Internal Layout, Switches & Instruments
| 16***74 | Plate, Abi,Ga Mntg; San 22290.Mss To 33***31 & 81***26.P G, 30/03/06.Requested By R Crutchley. | 1 |
| 33***78 | Plate, Radio Blank | 1 |
| 34***26 | Cluster, Centre,Instruments, Tier 3; San23955.Mss To 72***00 And 82***02 X 2, P Gamble 31/08***07. | 1 |
C3-40-1 Spool Switches
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
| 14***7Z | Washer | 4 |
C3-17-1 Heater
| 13***8Z | Screw, M8x30 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 14***7Z | Washer, Spring | 3 |
C3-1-13 Servo Stop Switch
| 70***32 | Switch, Stop - Servo | 1 |
C3-16-5 Air-Con, Receiver Drier
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***14 | Clip, Jubilee; Replaces Kej0337 | 1 |
C3-16-27 Air-Con, Receiver Drier, Electric Servo Option
| 13***0Z | Bolt, M8x40 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C3-4-1 Switch,Column
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***5Z | Screw, M5 X 20 | 2 |
C3-16-13 Air-Con Installation, Roof
C3-2-20 No Wipers
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 24***08 | Grommet, Blind | 2 |
| 71***02 | Plug, 4 Way | 2 |
C3-16-16 Air-Con,Condenser, Ls Option
| 12***91 | Washer, Nylon | 12 |
| 13***8Z | Screw, M6 X 30mm Long | 6 |
| 13***1Z | Bolt | 8 |
C3-9-8 Steel Head Liner, With Interior Light, Canopy
| 33***58 | Plate, Wa Steel Head Liner | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 82***60 | Screw, Button Head, M6x25 | 3 |
C3-9-1 Roof Lining, With Interior Light, No Speakers
| 16***26 | Panel, Roof Lining & Light, Without Speakers Abi | 1 |
| 33***21 | Liner, Roof, Plain | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
C3-16-40 Air-Con,Lsv, Tier 3 Mech Engine
C3-16-42 Air-Con,Lsv, Heater Circuit, Tier 3 Mech Engine
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
C3-8-10 Relays & Fuses Decal, 4 & 6 Speed
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 16***49 | Mounting, Relay Abi; San 23000.Cwe To 34***29.Pi L06/54.28/11/06, P Gamble | 1 |
C3-2-16 Washer Bottle Lid, & Tool Box Cover
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 7 |
| 16***26 | Cover, Lid Assembly, Washer Bottle | 1 |
C3-8-1 Relays & Fuses, 4 Speed
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 16***63 | Mounting, Abi,Relay.Standard, Tier 3 | 1 |
C3-16-7 Air-Con,Condenser, Tier 2 Mech Engine
| 12***91 | Washer, Nylon | 8 |
| 12***55 | Handle | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
C3-6-18 Pod Electrics, Servo
| 70***43 | Decal, Rocker Switch Top, Joystick Switch | 1 |
| 70***95 | Actuator, Stab Isolation | 1 |
| 70***04 | Cover, Switch Decal, Mac-Pactor | 1 |
C3-6-15 Ecu Unit, Boom Control
| 13***5Z | Bolt | 4 |
| 13***2Z | Nut, M12 | 1 |
| 14***6Z | Washer, M6 | 4 |
C3-6-1 3 Position Selector, & Ecu,Auto Steer, Control
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***39 | Catch, Steer Mode | 1 |
C3-2-15 Washer Bottle
| 13***0Z | Bolt, M8x40 | 1 |
| 13***1Z | Nut, M8 | 2 |
| 14***2Z | Screw, Self Tapping | 3 |
C3-12-3 Beacon,Strobe, Hazard Warning
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C3-9-5 Worklights Front
| 70***03 | Bulb, Dip | 2 |
| 70***77 | Light, Working, Rh - 12v | 1 |
| 70***78 | Light, Working, Lh - 12v | 1 |
C3-16-15 Receiver Drier, Air-Con, Ls Option
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-10-1 Radio Harness, & Aerial
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 16***83 | Grommet, Aerial | 1 |
C3-17-6 Heater Pipe Cover
| 13***5Z | Bolt | 3 |
| 14***6Z | Washer, M6 | 3 |
| 33***37 | Cover, Heater Pipe | 1 |
C3-2-22 Washer Bottle Option, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
C3-16-14 Air-Con,Hoses, Ls Option
| 64***86 | Hose, Air Con. No.8, B/Head To Condensor | 1 |
| 64***87 | Hose, Air Con. No.6 To M16, Condensor To Drier | 1 |
| 64***83 | Hose, Air Conditioning, Compressor To Seal Plate | 1 |
C3-1-10 R.H. Cluster, With Clock
| 72***00 | Cluster, Rh | 1 |
| 82***21 | Screw, Button Head M6x20, Stainless | 4 |
C3-16-43 Air-Con,Lsv,Hoses, Tier 3 Mech Engine
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 33***59 | Hose, Air-Con | 1 |
| 33***94 | Hose, Air-Con | 1 |
C3-16-30 Roof Condenser
| 02***92 | Screw, M6x16 | 8 |
| 13***3D | Nut, Locking M4 | 2 |
| 13***3D | Nut, Lock M6 | 8 |
C3-12-1 Beacon,Hinged
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 70***79 | Beacon, Hinged, Straight Cable | 1 |
C3-2-17 Washer Bottle,Canopy, Without Pump
| 13***0Z | Bolt, M8x40 | 1 |
| 16***26 | Cover, Lid Assembly, Washer Bottle | 1 |
| 16***21 | Moulding, Abi Front - Canopy | 1 |
D Controls-Machine, Engine & Steering
D1-4-2 Joystick, Twin Lever
| 70***32 | Control, Joystick Top 2 Auxiliary | 1 |
| 72***68 | Deutsch Dt Mounting Clip, 8 Way | 1 |
| 81***75 | Label, Flip Chart, Twin Auxiliary | 1 |
D1-5-2 Control Levers, Tilt Lock,Construct, Placing Pattern
| 12***53 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
D1-5-23 Control Lever, Full Lock,Slc, Loader Pattern
| 12***81 | Bar, Lever Lock | 1 |
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 3 |
D1-5-20 Blanking Kit, Manual Aux
| 13***1Z | Nut | 1 |
| 14***6Z | Washer, M6 | 4 |
| 16***02 | Plate, Cover Stab/Aperture | 1 |
D1-2-1 Parking Brake, Control,Ps750
| 13***8Z | Screw, M8x30 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***6Z | Washer, M6 | 1 |
D1-5-24 Control Lever, Tilt Lock,Slc, Loader Pattern
| 12***81 | Bar, Lever Lock | 1 |
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 3 |
D1-5-9 Control Levers,Long, No Lock,Agri, Loader Pattern
| 11***16 | Joint, Universal | 1 |
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 6 |
D1-5-25 Control Lever, No Lock,Slc, Loader Pattern
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 7 |
D1-4-1 Joystick, Single Aux
| 70***31 | Control, Joystick,Top 1 Auxiliary | 1 |
| 72***68 | Deutsch Dt Mounting Clip, 8 Way | 1 |
| 81***74 | Label, Flip Chart, Single Auxiliary | 1 |
D1-5-12 Blanking Kit, Aux & Sway
| 13***1Z | Nut | 1 |
| 14***6Z | Washer, M6 | 4 |
| 16***89 | Panel, Cover | 1 |
D1-5-3 Control Levers, Full Lock,Construct, Placing Pattern
| 12***53 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
D1-4-3 Joystick, Single Aux, Electric Servo
| 70***98 | Control, Joystick Top 1 Auxiliary, (Fwd & Rev Rocker Switch) | 1 |
| 72***68 | Deutsch Dt Mounting Clip, 8 Way | 1 |
| 81***90 | Label, Flip Chart 1 Auxiliary, Man Joystick | 1 |
D1-5-8 Control Levers,Short, Tilt Lock,Agri, Loader Pattern
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 8 |
D1-5-6 Control Levers,Short, No Lock,Agri, Loader Pattern
| 11***16 | Joint, Universal | 1 |
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 6 |
D1-6-3 Full Lever Locks, Construction, Placing & Loader Pattern
| 12***81 | Bar, Lever Lock | 1 |
| 16***50 | Lock, Auxiliary W.A. | 1 |
| 81***64 | Decal, Lever Lock, Construction | 1 |
D1-2-2 Parking Brake, Control,Ps760
| 13***8Z | Screw, M8x30 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 22***43 | Circlip | 1 |
D1-5-7 Control Levers,Short, Full Lock,Agri, Loader Pattern
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 8 |
D1-5-4 Control Levers, Tilt Lock,Construct, Loader Pattern
| 11***16 | Joint, Universal | 1 |
| 12***53 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
D1-8-1 Decals,Lever Knobs
| 81***87 | Decal, Knob,Placing Pattern, (Main Lever) | 1 |
| 81***88 | Decal, Knob,Placing Pattern, (Side Lever) | 1 |
| 81***89 | Decal, Knob,Loading Pattern, (Main Lever) | 1 |
D1-5-11 Control Levers,Long, Full Lock,Agri, Loader Pattern
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 8 |
D1-5-5 Control Levers, Full Lock,Construct, Loader Pattern
| 11***16 | Joint, Universal | 1 |
| 12***53 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
D1-5-1 Control Levers, No Lock,Construction, Placing & Loader Pattern
| 12***53 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
D1-4-4 Joystick, Twin Lever, Electric Servo
| 70***99 | Handle, Joystick,2 Auxiliary; Was Ref. R908352089 D.Jackson 20/08/07 | 1 |
| 72***68 | Deutsch Dt Mounting Clip, 8 Way | 1 |
| 81***93 | Label, Flip Chart 2 Auxiliary, Man Joystick | 1 |
D1-6-1 Full Lever Locks, Agriculture, Loader Pattern
| 12***81 | Bar, Lever Lock | 1 |
| 81***63 | Decal, Lever Lock, Agriculture | 1 |
| 82***62 | Clip | 2 |
D1-5-10 Control Levers.Long, Tilt Lock,Agri, Loader Pattern
| 12***53 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
D2-1-1 Control,Throttle, Crt3
| 13***8Z | Bolt | 1 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Bolt, M8 X 45 | 4 |
D2-11-1 Control,Throttle, Mt3
| 13***7D | Setscrew M5x25 | 1 |
| 13***3D | Setscrew | 3 |
| 13***2D | Bolt | 4 |
D2-1-2 Control Throttle, 5 Speed
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***7Z | Bolt | 1 |
| 13***3Z | Screw, M6x16 | 2 |
D3-1-2 Steering Column, Tilt And Telescope
| 12***61 | Plate, Retainer | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 16***61 | Bearing, Thrust Assembly | 1 |
D3-2-1 Steering Column, Covers
| 13***0Z | Setscrew, M5x10mm | 2 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 14***1Z | Washer, 2 Ba | 4 |
D3-1-1 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 16***61 | Bearing, Thrust Assembly | 1 |
E Hydraulics & Air Including, Steering
E1-20-16 Neutral Circuit, Sway,Variable Pump, With Trailer Brakes
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***9Z | Bolt, M8 X 35mm | 3 |
E1-1-3 Neutral Circuit, Sway,2 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***0Z | Bolt, M8x40 | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-1-21 Neutral Circuit, Fixed,Variable Pump, Electric Servo & Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
| 13***1Z | Bolt | 2 |
E1-1-11 Neutral Circuit, Sway,3 Stage Pump, Flowshare,(Lsp)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-1-25 Neutral Circuit,Lcs, Sway,2 Stage Pump, With Trailer Brakes,Australia & Nz
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***0Z | Bolt, M8x40 | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-10-10 Neutral Circuit, Fixed,3 Stage Pump, With Trailer Brakes,Flowshire (Lsp)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M8 X 45 | 1 |
E1-10-4 Neutral Circuit, Sway,2 Stage Pump, With Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***1Z | Bolt | 1 |
E1-10-20 Neutral Circuit, Fixed,Variable Pump, 140lpm
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
E1-1-13 Neutral Circuit, Fixed,Variable Pump
| 13***3Z | Screw, M6x16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-5-5 Single Aux, "Flat Face"High Flow
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E1-4-2 Steering Circuit, Variable Pump
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***9Z | Bolt, M6x90mm | 2 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
E1-13-3 Circuit,Cooling Fan, Non-Reversing, 100bhp Lsp
| 13***1Z | Setscrew, M6 X 12mm Long | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 5 |
| 13***9Z | Bolt, M8 X 90mm Long | 1 |
E1-20-15 Neutral Circuit, Sway,Variable Pump
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Bolt, M8 X 35mm | 3 |
E1-10-35 Neutral Circuit, Sway,Variable Pump, Sway, ( Motion Cut Out )
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-1-15 Neutral Circuit, Sway,Variable Pump
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
E1-10-36 Neutral Circuit, Sway,Variable Pump, Trailer Brakes (Motion Cut Out)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-1-14 Neutral Circuit, Fixed,Variable Pump, Trailer Brakes
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-13-22 Circuit,Cooling Fan, Reversing, Mt3, 84.5bhp/99bhp Engine Builds
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***4Z | Capscrew | 2 |
| 14***6Z | Washer, M6 | 2 |
E1-2-30 Circuit, Lift, Servo & Srs From 03.11.08
| 13***5Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 7 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
E1-4-10 Auto Smv Hydraulic, Circuit
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***6Z | Capscrew, M8 X 70mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-4-1 Steering Circuit
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***9Z | Bolt, M6x90mm | 2 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
E1-20-14 Neutral Circuit, Fixed, Variable Pump,With Trailer Brakes
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt, M8 X 45 | 2 |
E1-7-2 Circuit,Tow Hitch, Mechanical
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 1 |
| 13***2Z | Bolt, Hex. | 2 |
E1-13-8 Hydraulic Oil Cooler, Installation, Flowshare, Tier 3 Electronic (Crt3)
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-7-1 Circuit,Tow Hitch, Hydraulic
| 13***0Z | Bolt, M8x40 | 3 |
| 13***6Z | Bolt, M8 X 70 | 1 |
| 13***2Z | Bolt, Hex. | 2 |
E1-13-17 Hydraulic Oil Cooler, Installation, Tier 3 Mechanical (Mt3)
| 12***55 | Handle | 1 |
| 13***3Z | Bolt, M8 X 55 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E1-10-25 Neutral Circuit, Sway,2 Stage Pump, Lcs,Trailer Brakes F.O.W, Aus & N.Z.
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***1Z | Bolt, M8 X 45 | 2 |
E1-1-12 Neutral Circuit, Sway,3 Stage Pump, With Trailer Brakes,Flowshare (Lsp)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-10-6 Neutral Circuit, Fixed,3 Stage Pump, With Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
E1-1-7 Neutral Circuit, Sway,3 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-1-5 Neutral Circuit, Fixed,3 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
E1-5-3 Single Aux, 'Flat Face'Couplings
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E1-13-15 Hydraulic Oil Cooler, Installation
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 6 |
| 13***7Z | Bolt, M10x25 | 2 |
E1-13-7 Hydraulic Oil Cooler, Installation, Tier 3 Electronic (Crt3)
| 12***91 | Washer, Nylon | 12 |
| 12***55 | Handle | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
E1-7-22 Rear Aux Coupling, & Hitch
| 13***7Z | Bolt, M10x25 | 2 |
| 13***0D | Capscrew, M6 X 40 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-10-24 Neutral Circuit
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***4Z | Bolt | 2 |
E1-1-28 Neutral Circuit, Load Control System
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***1Z | Bolt, M8 X 45 | 3 |
E1-7-15 Rear Aux,Single, Circuit Installation, With Tow Hitch
| 13***5Z | Bolt | 3 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
| 13***6Z | Bolt, M8 X 70 | 1 |
E1-7-10 Directional Valve, Electric Servo, Trailer/Tow Hitch
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 1 |
| 16***53 | Adaptor; O Ring 24***06 | 1 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 1 |
E1-10-40 Neutral Circuit, Fixed,Variable Pump, Trailer Brakes (Motion Cut Out)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***0Z | Bolt | 2 |
E1-2-3 Circuit,Lift End, Srs,Electric Servo
| 13***3Z | Screw, M8 X 16 | 7 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Screw, M8x30 | 2 |
E1-10-13 Neutral Circuit, Fixed, Variable Pump
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
E1-2-1 Circuit,Lift End
| 13***3Z | Screw, M6x16 | 1 |
| 13***3Z | Screw, M8 X 16 | 7 |
| 13***0Z | Bolt | 4 |
E1-1-16 Neutral Circuit, Sway,Variable Pump, Trailer Brakes
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
E1-10-16 Neutral Circuit, Sway,Variable Pump, Trailer Brakes
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
E1-1-8 Neutral Circuit, Sway,3 Stage Pump, With Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-1-4 Neutral Circuit, Sway,2 Stage Pump, With Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-13-4 Circuit,Cooling Fan, Reversing, 100bhp Lsp
| 13***5Z | Bolt | 4 |
| 13***2Z | Screw, M6 X 50 | 1 |
| 13***3Z | Bolt, M10 X 130 | 2 |
E1-1-6 Neutral Circuit, Fixed,3 Stage Pump, With Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***0Z | Bolt | 2 |
E1-10-9 Neutral Circuit, Fixed,3 Stage Pump, Flowshare,(Lsp)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M8 X 45 | 1 |
E1-1-2 Neutral Circuit, Fixed,2 Stage Pump, With Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***0Z | Bolt | 2 |
E1-13-24 Circuit,Cooling Fan, Reversing, Mt3, 99bhp/114bhp Engine Builds With Cac
| 13***3Z | Bolt, M8 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-10-30 Neutral Circuit, Fixed,Variable Pump, (Motion Cut Out)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***0Z | Bolt | 4 |
E1-2-2 Circuit,Lift End
| 13***3Z | Screw, M6x16 | 1 |
| 13***3Z | Screw, M8 X 16 | 7 |
| 13***0Z | Bolt | 4 |
E1-1-29 Neutral Circuit, Load Control System, Sway,Aus,Nz & R.O.W.
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***0Z | Bolt, M8x40 | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
E1-13-21 Circuit,Cooling Fan, Non-Reversing Mt3, 84.5bhp/99bhp Engine Builds
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 8 |
E1-14-1 Circuit Accumulator, Hydraulics
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 16***69 | Filter, Pilot Assembly | 1 |
E1-10-21 Neutral Circuit, Fixed,Variable Pump, 140lpm,Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
E1-13-5 Circuit,Cooling Fan, Non-Reversing Crt3
| 13***5Z | Bolt | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 1 |
| 13***3Z | Bolt, M10 X 130 | 2 |
E1-10-7 Neutral Circuit, Sway,3 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***1Z | Bolt | 1 |
E1-4-11 Manual Smv Hydraulic, Circuit
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***4Z | Bolt | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-20-13 Neutral Circuit, Fixed, Variable Pump
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt, M8 X 45 | 2 |
E1-40-2 93kw Check Valve, Service Kit, Ref Hydraulic Oil Kit,Flowshare
| 13***1Z | Bolt | 2 |
| 13***3Z | Bolt, M6x55 | 2 |
| 14***6Z | Washer, M6 | 4 |
E1-13-18 Hydraulic Oil Cooler, Tier 3 Mechanical, (Mt3)
| 12***91 | Washer, Nylon | 4 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
E1-5-4 Twin Aux, 'Flat Face'Couplings
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E1-40-1 74.2kw Check Valve, Service Kit, Ref Hydraulic Oil Cooler,Flowshare
| 13***1Z | Bolt | 2 |
| 13***3Z | Bolt, M6x55 | 2 |
| 14***6Z | Washer, M6 | 4 |
E1-10-12 Neutral Circuit, Sway,3 Stage Pump, With Trailer Brakes,Flowshire,(Lsp)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***1Z | Bolt | 1 |
E1-7-14 Rear Aux,Single, Circuit,Installation
| 13***5Z | Bolt | 3 |
| 13***6Z | Bolt, M8 X 70 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
E1-13-23 Circuit,Cooling Fan, Non-Reversing Mt3, 99bhp/114bhp Engine Builds With Cac
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Bolt, M8 X 55 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
E1-1-1 Neutral Circuit, Fixed,2 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***1Z | Bolt, M8 X 45 | 3 |
E1-10-15 Neutral Circuit, Sway,Variable Pump
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
E1-1-24 Neutral Circuit,Lcs, Fixed 2 Stage Pump, With Trailer Brakes,Australia & Nz
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***0Z | Bolt | 2 |
E1-13-25 Valve, Reversing, Cooling Fan Mt3
| 25***33 | Kit-Seal | 1 |
| 25***34 | Coil | 1 |
| 33***22 | Valve, Fan Reversing T3 | 1 |
E1-5-2 Circuit,Aux 2, Con & Agri
| 13***8Z | Screw, M8x30 | 2 |
| 13***2Z | Bolt | 1 |
| 13***8Z | Bolt, M8x80mm Long | 1 |
E1-13-6 Circuit,Cooling Fan, Reversing Crt3
| 13***5Z | Bolt | 4 |
| 13***4Z | Bolt, M10 X 140 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
E1-10-8 Neutral Circuit, Sway,3 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***1Z | Bolt | 1 |
E1-13-1 Circuit,Cooling Fan, Non-Reversing
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 1 |
| 13***3Z | Bolt, M10 X 130 | 2 |
E1-10-3 Neutral Circuit, Sway,2 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***1Z | Bolt | 1 |
E1-10-1 Neutral Circuit, Fixed,2 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***1Z | Bolt | 1 |
| 13***0Z | Bolt | 1 |
E1-6-1 Hydraulic Filter, Variable Pump, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 13***1Z | Bolt, M8 X 45 | 2 |
E1-10-11 Neutral Circuit, Sway,3 Stage Pump, Flowshare, (Lsp)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 3 |
| 13***1Z | Bolt | 1 |
E1-5-1 Circuit,Aux 1
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***2Z | Bolt | 1 |
E1-10-5 Neutral Circuit, Fixed,3 Stage Pump
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
E1-10-2 Neutral Circuit, Fixed,2 Stage Pump, With Trailer Brakes
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***1Z | Bolt | 1 |
| 13***1Z | Bolt, M8 X 45 | 1 |
E1-7-21 Rear Aux Coupling
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 33***42 | Seal, Flat | 1 |
E1-4-3 Steering Circuit, Variable Pump, Electric Servo
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***9Z | Bolt, M6x90mm | 2 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
E1-7-20 Rear Aux Cover
| 13***0Z | Bolt | 2 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-2-20 Circuit, Lift, End (Boom)
| 13***3Z | Screw, M6x16 | 1 |
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***0Z | Bolt | 4 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-1-20 Neutral Circuit, Fixed,Variable Pump, Electric Servo
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
| 13***1Z | Bolt | 2 |
E1-13-2 Circuit,Cooling Fan, Reversing, 100bhp Lsp
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-1-10 Neutral Circuit, Fixed,3 Stage Pump, With Trailer Brakes,Flowshare (Lsp)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***0Z | Bolt | 2 |
E1-1-9 Neutral Circuit, Fixed,3 Stage Pump, Flowshare (Lsp)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***0Z | Bolt | 3 |
E1-10-14 Neutral Circuit, Fixed, Variable Pump,Trailer Brakes
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
E2-1-20 Service Kit, Variable Disp Pump, (Use On 20/925742)
| 33***96 | Kit, Service-Vari Pump; San26021.Kit Created To Amend 20/92***42.Due, Ue To 20/92***42 Failures.Pi C02186.Pg 28/3/8 | 1 |
E2-2-3 Pump,(Three Stage), Main Hydraulics, Fittings & Mountings (110 L/Min)
| 13***8Z | Bolt | 4 |
| 14***8Z | Washer, Spring | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
E2-5-1 Motor,Fan Drive, Non-Reversing
| 16***24 | G.A, Sa Fan Hyds, 63kw | 1 |
| 20***55 | Motor, Hydraulic Drive, (Red), 80hp | 1 |
| 20***77 | Motor, Fan | 1 |
E2-5-6 Motor,Fan Drive, Bi-Directional, (Reversing)
| 16***54 | G.A, Abi Cooling System -, Tier 3 | 1 |
| 16***63 | G.A, Fan Hyds Rev 97kw | 1 |
| 20***28 | Motor, Fan Drive, Reversing (97kw, 130bhp) | 1 |
E2-5-13 Motor,Fan Drive, Non-Reversing Mt3, 99bhp & 114bhp Engines
| 33***93 | G.A, Fan Hydraulics, Non Reversing 114bhp | 1 |
| 33***07 | G.A, Fan Hydraulics, Non Reversing | 1 |
| 33***35 | Motor, Fan Bi-Directional | 1 |
E2-5-5 Motor,Fan Drive, Non-Reversing
| 16***45 | G.A, Abi Cooling Pack, 108kw Tier 3 | 1 |
| 16***62 | G.A, Fan Hyds 97kw, Tier 3 | 1 |
| 20***59 | Motor, Hydraulic Fan,125hp, 93kw,(Silver) | 1 |
E2-5-3 Motor,Fan Drive, Non-Reversing, 100bhp Lsp
| 16***35 | G.A, Sa Fan Hydraulic Standard, 84.5 & 100hp | 1 |
| 20***43 | Motor, Cooling Fan,(Black), Non-Reversing,100hp; San 22992.Cwe To 20/92***79.L06/166,13/11/06, P Gamble | 1 |
| 20***79 | Motor, Fan,Cooling, 122cc,74.2kw | 1 |
E2-1-6 Pump,Variable Disp, Main Hydraulics, 140 L/Min
| 20***42 | Variable Disp Pump, 140 L/Min | 1 |
| 20***11 | Gasket | 1 |
| 20***12 | Screw, Socket Head | 4 |
E2-1-3 Pump,(Three Stage), Main Hydraulics, 110 L/Min
| 20***88 | Pump, Main.3 Stage, Supp No 7029530008 | 1 |
| 35***98 | Valve, Priority Steer | 1 |
| 98***61 | Kit, Seal | 1 |
E2-2-6 Pump,Variable Flow, Main Hydraulics, Fittings & Mountings,140 L/Min
| 13***8Z | Bolt | 1 |
| 13***8Z | Bolt, M12 X 30 | 4 |
| 13***7Z | Screw, M12x30; Replaces 60***07 | 1 |
E2-5-14 Motor,Fan Drive, Bi-Directional Mt3, (Reversing) 99bhp & 114bhp Engines
| 33***78 | G.A, Fan Hydraulics, Reversing | 1 |
| 33***00 | G.A, Fan Hydraulics, Reversing | 1 |
| 33***35 | Motor, Fan Bi-Directional | 1 |
E2-5-4 Motor,Fan Drive, Bi-Directional, (Reversing) 100bhp Lsp
| 16***51 | G.A, Sa Fan Hyds. Rev Lsv, 74.2 Kw | 1 |
| 20***44 | Motor, Cooling Fan, Reversing; San 22992.Cwe To 20/92***80.L06/166,13/11/06, P Gamble. | 1 |
| 20***80 | Motor, Fan,12cc-Rev 7 | 1 |
E2-2-1 Pump,(Two Stage), Main Hydraulics, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 14***8Z | Washer, Spring | 4 |
| 16***50 | Adaptor | 1 |
E2-1-2 Pump,(Three Stage), Main Hydraulics, 80 L/Min
| 20***91 | Pump, Hydraulic - 3 Stage | 1 |
E2-2-2 Pump,(Three Stage), Main Hydraulics, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 14***8Z | Washer, Spring | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
E2-5-12 Motor,Fan Drive, Bi-Directional Mt3, (Reversing) 84.5bhp Engine
| 33***82 | Motor, 15cc Bi-Directional | 1 |
| 33***16 | G.A, Fan Hydraulics, Reversing 63kw | 1 |
| 33***25 | G.A, Engine Build 63kw, Tier 3 Mech Rev | 1 |
E2-5-11 Motor,Fan Drive, Non-Reversing Mt3, 84.5bhp Engine
| 33***71 | Motor, Fan | 1 |
| 33***76 | G.A, Fan Hydraulics 63kw | 1 |
| 33***00 | G.A, Engine Build 63kw, Tier 3 Mech | 1 |
E2-1-1 Pump,(Two Stage), Main Hydraulics, 80 L/Min
| 20***03 | O Ring | 1 |
| 20***92 | Pump, Hydraulic- 2 Stage | 1 |
| 20***83 | Valve, Port Mounted | 1 |
E2-5-2 Motor,Fan Drive, Bi-Directional, (Reversing)
| 16***22 | G.A, Sa Fan Hyds-Reversin, G 63kw | 1 |
| 20***56 | Motor, Fan; San 22994.Cwe To 20/92***78.L06/268.P Gamble, 15/11***06 | 1 |
| 20***78 | Motor, Hydraulic Drive Fan | 1 |
E3-2-26 Outlet Valve, Electric Servo
| 33***76 | Valve, Outlet,Section | 1 |
| 33***12 | Valve, Flushing | 1 |
E3-28-1 Outlet Section, Lsp
| 25***81 | Plug, 1 1/16 For P | 1 |
| 25***92 | Kit, Between Section Seal | 1 |
| 25***33 | Kit, Tie Rod | 1 |
E3-14-6 Lcs Valve
| 25***50 | Valve, Block,Load Control | 1 |
| 33***96 | Valve, Block,Load Control | 1 |
| 71***37 | Coil, 12v | 2 |
E3-1-16 Valve Assy,2 Lev, Motion Cut-Out, Australia & New Zealand
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***4D | Capscrew | 3 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 5 |
E3-31-5 Pilot Control Valve
| 25***87 | Valve, Pilot Control | 1 |
| 25***56 | Coil, Solenoid | 4 |
| 33***62 | Valve, Pressure Relief; San25844.Ss To 25/22***93.Same Item.P Gamble, 09/04***08.Ref Dave Alison. | 1 |
E3-1-4 Valve Assy,Slc, Agriculture,Srs, 25/220632
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt | 1 |
E3-21-3 Valve Assy,Lsp, Adaptors
| 13***9Z | Screw, M10x35mm | 5 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 3 |
E3-31-1 Pilot Valve Controls, Installation,Lsp
| 13***0Z | Bolt | 2 |
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E3-21-2 Valve Assy,Lsp,Srs, Adaptors
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Screw, M10x35mm | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 5 |
E3-2-24 Ext Valve, Electric Servo
| 25***91 | Kit-Seal, Secondary Valves | 2 |
| 25***23 | Kit-Valve, Check Valve | 2 |
| 33***74 | Valve, Extension,Section | 1 |
E3-14-5 Lcs Valve Control, Installation
| 13***8Z | Bolt, M8x80mm Long | 3 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E3-10-20 Steering Field Fix, Bi-Directional
| 33***41 | Valve, Bi-Directional Check | 1 |
| 33***58 | Adapter, 3/8"Bspm-13/16"Unff | 1 |
| 33***59 | Adapter, 3/8"Bspf-13/16"Unfm | 1 |
E3-1-10 Valve Assy, Electric - Servo
| 13***9Z | Screw, M10x35mm | 3 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-21-4 Valve Assy,Lsp,Srs, Adaptors
| 13***9Z | Screw, M10x35mm | 5 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 3 |
E3-23-11 Inlet Valve,Lsp,Srs, Variable Pump, Valve Block 25/223642
| 25***73 | Valve, Ls Pressure Relief; San 20565.25/22***73 Same As 25/22***80., P Gamble 22/06***04 | 1 |
| 25***74 | Valve, Flow Regulator | 1 |
| 25***80 | Plug, 1 5/16 For T2 | 1 |
E3-2-8 Valve Components, Agriculture,Slc, Smooth Ride System,25/220630
| 25***16 | Valve, Section | 1 |
| 25***17 | Valve Section | 1 |
| 25***01 | Cover, Inlet; Note 1. Used On 25/40***00,25/40***00, Cover, Inlet, Cover, Inlet; Inlet See Note 1.4 Spool. Refer To Valve Assembly, Cover, Inlet; Note 1. 25/40***00,40***00,40***00,40***00,40***00,40***00 | 1 |
E3-10-1 Steer Valve, Without Shock Valves
| 35***86 | Valve, Steer, 159cc Load Sense; San25456.Cwe To 35/91***87.P Gamble/P Wallace, 31/10***07 | 1 |
E3-2-5 Valve Components, Construction, 25/411700
| 25***68 | Valve, Section | 2 |
| 25***71 | Valve, Section | 1 |
| 25***94 | Valve, Main Relief, 240bar 78 Lpm | 1 |
E3-20-1 Valve Block,Lsp, Installation
| 34***95 | G.A., V/Block & Controls, Lsv | 1 |
E3-10-2 Steer Valve, With Shock Valves
| 33***64 | Valve, Steer + Shocks | 1 |
| 35***87 | Valve, Steer, 159cc Load Sense | 1 |
E3-1-5 Valve Assy,4 Spool, Construction,2 Lever, 24/411700
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***1Z | Bolt, M8 X 45 | 1 |
E3-2-15 Valve Components, Motion Cut-Out, Australia & New Zealand
| 25***94 | Valve, Main Relief, 240bar 78 Lpm | 1 |
| 25***19 | Valve Section | 2 |
| 25***59 | Valve, Section | 1 |
E3-25-1 Valve,Fork Section, Lsp
| 25***77 | Kit, Check Valve L | 2 |
| 25***82 | Valve, Pressure Relief H, Requires Setting | 2 |
| 25***91 | Kit-Seal, Secondary Valves | 1 |
E3-30-2 Hydraulic Filter, Electric Servo
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 16***61 | Adapter, M/M | 1 |
E3-22-3 Valve Block,Lsp
| 25***92 | Kit, Between Section Seal | 1 |
| 25***33 | Kit, Tie Rod | 1 |
| 25***42 | Valve, Section,Fork | 1 |
E3-2-11 Valve Components, Electric Servo
| 25***66 | Valve, Control, Electric Servo | 1 |
| 33***96 | Kit, Seal | 1 |
| 33***71 | Valve, Inlet,Section | 1 |
E3-12-1 Inloader Valve, & Hpa Mini Filter
| 13***5Z | Bolt | 2 |
| 13***7Z | Bolt | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-20-11 Valve Block,Lsp.Srs, For Variable Pumps, Installati0n
E3-24-1 Boom,(Lift)Section, Lsp
| 25***77 | Kit, Check Valve L | 2 |
| 25***83 | Kit-Plug Q | 2 |
| 25***91 | Kit-Seal, Secondary Valves | 2 |
E3-23-1 Inlet Valve, Lsp
| 25***71 | Kit, Regulating P | 1 |
| 25***73 | Valve, Ls Pressure Relief; San 20565.25/22***73 Same As 25/22***80., P Gamble 22/06***04 | 1 |
| 25***74 | Valve, Flow Regulator | 1 |
E3-2-21 Inlet Valve, Electric Servo
| 25***73 | Valve, Ls Pressure Relief; San 20565.25/22***73 Same As 25/22***80., P Gamble 22/06***04 | 1 |
| 25***74 | Valve, Flow Regulator | 1 |
| 25***86 | Plug, 9/16" Unf | 1 |
E3-30-1 Lubrication, & Filters
| 32***01 | Element, 25 Micron | 1 |
| 32***02 | Element, 10 Micron | 1 |
| 32***04 | Element, Air Filter, Main | 1 |
E3-21-1 Valve Assy,Lsp, Adaptors
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Screw, M10x35mm | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 5 |
E3-26-1 Valve,Tele Section, Lsp
| 25***77 | Kit, Check Valve L | 2 |
| 25***78 | Kit-Hydraulic Operation, H200 | 2 |
| 25***82 | Valve, Pressure Relief H, Requires Setting | 2 |
E3-2-25 Lift Valve, Electric Servo
| 25***91 | Kit-Seal, Secondary Valves | 2 |
| 25***23 | Kit-Valve, Check Valve | 2 |
| 33***75 | Valve, Lift,Section | 1 |
E3-27-1 Valve,Aux Section, Lsp
| 25***77 | Kit, Check Valve L | 2 |
| 25***78 | Kit-Hydraulic Operation, H200 | 2 |
| 25***82 | Valve, Pressure Relief H, Requires Setting | 2 |
E3-20-3 Valve Block,Lsp, Installation
| 34***97 | G.A., V/Block & Controls, Lsv | 1 |
E3-8-1 Valve Assy, Sway
| 13***0Z | Bolt, M8x40 | 2 |
| 13***8Z | Bolt, M10 X 30 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E3-3-1 Valve Section, Components
| 25***06 | Kit-End Mechanism | 1 |
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 2 |
E3-20-10 Valve Block,Lsp,Srs, For Variable Pumps, Installation
E3-20-4 Valve Block,Lsp,Srs, Installation
| 34***95 | G.A., V/Block & Controls, Lsv | 1 |
E3-1-11 Valve Assy, Electric - Servo
| 13***9Z | Screw, M10x35mm | 3 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-24-2 Boom,Lift Section, Lsp
| 25***77 | Kit, Check Valve L | 2 |
| 25***83 | Kit-Plug Q | 2 |
| 25***91 | Kit-Seal, Secondary Valves | 2 |
E3-41-2 Pilot Valve Hoses, Installation,Lsp,Srs, For Variable Pump
| 61***49 | Hose, 1/4bspx470; Port B2 (Green Colour). Was 63***04, Hose, 1/4bspx470 | 1 |
| 61***13 | Hose | 1 |
| 64***75 | Hose, Servo 1300mm | 2 |
E3-20-2 Valve Block,Lsp,Srs, Installation, Smooth Ride System
| 34***96 | G.A., V/Block & Controls, Lsv.Smooth Ride | 1 |
E3-2-6 Valve Components, Agriculture,2 Lever, 25/409500
| 25***01 | Cover, Inlet; Note 1. Used On 25/40***00,25/40***00, Cover, Inlet, Cover, Inlet; Inlet See Note 1.4 Spool. Refer To Valve Assembly, Cover, Inlet; Note 1. 25/40***00,40***00,40***00,40***00,40***00,40***00 | 1 |
| 25***02 | Valve, Section | 1 |
| 25***05 | Cover, Outlet | 1 |
E3-2-16 Valve Components, Motion Cut-Out, Australia & New Zealand
| 25***94 | Valve, Main Relief, 240bar 78 Lpm | 1 |
| 25***19 | Valve Section | 1 |
| 25***59 | Valve, Section | 1 |
E3-1-6 Valve Assy,4 Spool, Agriculture,2 Lever, 25/409500
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***1Z | Bolt, M8 X 45 | 1 |
E3-6-1 Steer Mode Valve, Auto
| 13***12 | Capscrew | 2 |
| 14***7Z | Washer, Spring | 2 |
| 25***45 | Coil, 12v Dc | 4 |
E3-13-1 Counterbalance Valve
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E3-2-2 Valve Components, Agriculture, 25/407900
| 25***01 | Cover, Inlet; Note 1. Used On 25/40***00,25/40***00, Cover, Inlet, Cover, Inlet; Inlet See Note 1.4 Spool. Refer To Valve Assembly, Cover, Inlet; Note 1. 25/40***00,40***00,40***00,40***00,40***00,40***00 | 1 |
| 25***02 | Valve, Section | 1 |
| 25***05 | Cover, Outlet | 1 |
E3-2-22 Aux Valve, Electric Servo
| 25***82 | Valve, Pressure Relief H, Requires Setting | 1 |
| 25***91 | Kit-Seal, Secondary Valves | 1 |
| 25***23 | Kit-Valve, Check Valve | 1 |
E3-5-1 Valve Conversion, Smooth Ride System
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
| 14***7Z | Washer | 4 |
E3-25-2 Valve,Fork Section, Lsp
| 25***77 | Kit, Check Valve L | 2 |
| 25***82 | Valve, Pressure Relief H, Requires Setting | 2 |
| 25***91 | Kit-Seal, Secondary Valves | 1 |
E3-2-10 Valve Components, Electric Servo
| 25***87 | Valve, Block,Control, Electric-Servo | 1 |
| 33***96 | Kit, Seal | 1 |
| 33***72 | Valve, Auxiliary,Section | 1 |
E3-4-1 Diverter Valve, Ram Fitted, Smooth Ride System
| 25***96 | Kit, Seal | 1 |
| 25***90 | Valve, Diverter | 1 |
| 25***01 | Coil, 35mm Long, 12.7mm Dia Hole | 1 |
E3-35-1 Cover, Filter & Pipework
| 13***8Z | Screw, M8x30 | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***4Z | Washer | 1 |
E3-23-3 Inlet Valve, Lsp
| 25***71 | Kit, Regulating P | 1 |
| 25***73 | Valve, Ls Pressure Relief; San 20565.25/22***73 Same As 25/22***80., P Gamble 22/06***04 | 1 |
| 25***74 | Valve, Flow Regulator | 1 |
E3-22-1 Valve Block,Lsp
| 25***92 | Kit, Between Section Seal | 1 |
| 25***33 | Kit, Tie Rod | 1 |
| 25***42 | Valve, Section,Fork | 1 |
E3-22-11 Valve Block.Lsp,Srs, Variable Pump
| 25***92 | Kit, Between Section Seal | 1 |
| 25***33 | Kit, Tie Rod | 1 |
| 25***24 | Valve, Section,Boom | 1 |
E3-22-4 Valve Block,Lsp,Srs
| 25***92 | Kit, Between Section Seal | 1 |
| 25***33 | Kit, Tie Rod | 1 |
| 25***64 | Valve, Inlet Section | 1 |
E3-1-8 Valve Assy,Slc, Agriculture,Srs, 25/220630
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt | 1 |
E3-2-1 Valve Components, Construction, 25/411600
| 25***68 | Valve, Section | 2 |
| 25***94 | Valve, Main Relief, 240bar 78 Lpm | 1 |
| 25***01 | Cover, Inlet | 1 |
E3-1-7 Valve Assy,4 Spool, Construction,2 Lever, Smooth Ride System,25/220631
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***1Z | Bolt, M8 X 45 | 1 |
E3-2-23 Tilt Valve, Electric Servo
| 25***82 | Valve, Pressure Relief H, Requires Setting | 1 |
| 25***91 | Kit-Seal, Secondary Valves | 1 |
| 25***23 | Kit-Valve, Check Valve | 1 |
E3-1-2 Valve Assy,4 Spool, Agriculture,2 Lever, 25/407900
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt | 1 |
E3-16-1 Pilot Valve, & Hpa Mini Filter, Electric Servo Option
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***6Z | Washer, M6 | 2 |
E3-1-20 Valve Assembly, 4 Spool, Variable Pump , Srs
| 33***16 | Valve, Block, Control | 1 |
E3-1-15 Valve Assy,2 Lev, Motion Cut-Out, Australian & New Zealand
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***4D | Capscrew | 3 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 5 |
E3-15-1 Shuttle Valve, Variable Pump
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 4 |
E3-2-3 Valve Components, Construction,Srs, 25/220633
| 25***68 | Valve, Section | 1 |
| 25***94 | Valve, Main Relief, 240bar 78 Lpm | 1 |
| 25***18 | Valve Section | 1 |
E3-22-2 Valve Block,Lsp,Srs
| 25***92 | Kit, Between Section Seal | 1 |
| 25***33 | Kit, Tie Rod | 1 |
| 25***68 | Valve, Inlet | 1 |
E3-23-10 Inlet Valve,Lsp,Srs, Variable Pump, Valve Block 25/223641
| 25***73 | Valve, Ls Pressure Relief; San 20565.25/22***73 Same As 25/22***80., P Gamble 22/06***04 | 1 |
| 25***74 | Valve, Flow Regulator | 1 |
| 25***80 | Plug, 1 5/16 For T2 | 1 |
E3-14-1 Priority Steer Valve, Varible Pump
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E3-1-30 Valve Assembly, 4 Spool, Variable Pump. Srs
| 33***45 | Valve, Block, Control | 1 |
E3-50-1 Spool Switches
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
| 14***7Z | Washer | 4 |
E3-1-3 Valve Assy,4 Spool, Construction,2 Lever, Smooth Ride System,25/220633
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt | 1 |
E3-41-1 Pilot Valve Hoses, Installation,Lsp
| 61***49 | Hose, 1/4bspx470; Port B2 (Green Colour). Was 63***04, Hose, 1/4bspx470 | 1 |
| 61***13 | Hose | 1 |
| 64***76 | Hose, 1/4" Bsp 1650mm | 2 |
E3-6-2 Steer Mode Valve, Manual,C/W Cable
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E3-2-4 Valve Components,Slc, Agriculture,Srs, 25/220632
| 25***16 | Valve, Section | 1 |
| 25***17 | Valve Section | 1 |
| 25***01 | Cover, Inlet; Note 1. Used On 25/40***00,25/40***00, Cover, Inlet, Cover, Inlet; Inlet See Note 1.4 Spool. Refer To Valve Assembly, Cover, Inlet; Note 1. 25/40***00,40***00,40***00,40***00,40***00,40***00 | 1 |
E3-12-5 Inloader Valve, Non-Electric
| 13***1Z | Screw | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***73 | G.A., Non-Elec Inloader | 1 |
E3-9-1 Valve, Directional Control
| 25***52 | Coil, 12v Dc | 1 |
| 25***53 | Nut, Coil Retaining | 1 |
| 25***54 | Seal, O Ring | 4 |
E3-11-1 Non Rear Aux Servo
| 33***55 | Plug, Point Test | 1 |
| 33***05 | Blank, Switch | 1 |
| 71***09 | Plug, Male,2 Way, Deutsch | 3 |
E3-17-2 Valve, Reversing, Cooling Fan Mt3
| 25***33 | Kit-Seal | 1 |
| 25***34 | Coil | 1 |
| 33***22 | Valve, Fan Reversing T3 | 1 |
E3-10-3 Steer Valve, With Shock Valves, Electric Servo
| 35***04 | Valve, Steer, 160cc Load Sense | 1 |
E3-2-7 Valve Components, Construction,2 Lever, Smooth Ride System,25/220631
| 25***68 | Valve, Section | 1 |
| 25***71 | Valve, Section | 1 |
| 25***94 | Valve, Main Relief, 240bar 78 Lpm | 1 |
E3-1-1 Valve Assy,4 Spool, Construction,2 Lever, 25/411600
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt | 1 |
E3-22-10 Valve Block,Lsp,Srs, Variable Pump
| 25***92 | Kit, Between Section Seal | 1 |
| 25***33 | Kit, Tie Rod | 1 |
| 25***24 | Valve, Section,Boom | 1 |
E4-21-1 Extension Ram, Electric Servo & Srs
| 13***12 | Capscrew | 4 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-4-1 Ram,Sway
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 15***31 | Lug | 1 |
E4-7-3 Ram,Tilt,Srs, Servo, Electric
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
E4-16-1 Carriage Ram, Manitou
| 55***71 | Ram, Q-Hitch; San25657.Cwe By Mss To 33***72,33***71 &, 13***26.P Gamble/T Bland.24/01***08 | 1 |
| 99***84 | Kit, Seal | 1 |
E4-20-2 Lift,Ram,Flow Share, Smooth Ride System, Installation
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***01 | Washer, Aluminium | 1 |
E4-3-4 Ram, Displacement
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 24***39 | Seal, Piston | 1 |
| 24***20 | Ring, Wear | 2 |
E4-17-1 Ram,Large Top Grabs
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
| 24***31 | Seal, Piston, 70 X 6.0 | 1 |
| 24***12 | Ring, Wear, 70 X 6.8 | 2 |
E4-16-2 Ram,Quick Hitch, Pin & Cone Carriage
| 33***71 | Ram, Ga,Q/Hitch 50 X 30 | 1 |
| 99***84 | Kit, Seal | 1 |
E4-1-22 Ram,Lift, Smooth Ride System, Electric Servo
| 13***14 | Screw, Cap | 4 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-1-21 Ram,Lift, Smooth Ride System, Electric Servo
| 13***14 | Screw, Cap | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
E4-7-1 Ram,Tilt, Srs
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
E4-20-1 Lift,Ram,Srs, Srs, Installation
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***01 | Washer, Aluminium | 1 |
E4-1-2 Ram,Lift
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-8-1 Ram,Extension
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-1-12 Ram,Lift, Smooth Ride System, Installation
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-1-31 Ram,Lift, Smooth Ride, Electric Servo
| 13***14 | Screw, Cap | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
E4-1-20 Ram, Lift
| 24***47 | Seal, Piston, 140mmx119mmx10mm | 1 |
| 24***24 | Ring, Wear, 140mmx135mmx15mm | 2 |
| 25***65 | Valve, Counterbalance, Sun A-204-30j-J03 | 1 |
E4-1-11 Ram,Lift, Smooth Ride System, Installation
| 12***21 | Bush | 1 |
| 13***14 | Screw, Cap | 4 |
| 14***01 | Washer, Aluminium | 1 |
E4-1-1 Ram,Lift
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-3-1 Ram,Displacement, Agricultural
| 12***21 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-4-2 Ram, Sway
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 15***31 | Lug | 1 |
E4-3-2 Ram,Displacement, Construction
| 12***21 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-7-2 Ram,Tilt, Construction & Srs
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 1 |
| 23***14 | O Ring | 1 |
F Axles, Wheels & Transmission
F1-2-2 Differential Assy, Maxtrac,Fixed 29 Kph, Axle 453/33380
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-2-4 Differential Assy, Maxtrac,Sway,29 Kph, 453/33400
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-5-2 Differential, Components, Axle 453/33380,33400
| 13***18 | Bolt | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-7-1 Knuckle,Steering, & Hub Driveshaft, 453/33390,380,410,400,270,280,370,360
| 13***09 | Screw | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***03 | Joint, Knuckle Swivel | 1 |
F1-3-1 Hub & Components, 453/33390,380,410,400,270,280,370,360
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F1-2-9 Differential Assy, Fixed,L.S.D, 40 Kph, Axle 453/34330
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-4-4 Crown Wheel & Pinion, Axle 453/32800,33360
| 45***00 | Differential, Assembly | 1 |
| 45***49 | Gear, Crownwheel/Pinion Rh, Spiral, 13t/38t, M30 | 1 |
| 45***58 | Gear, Crown Wheel & Pinion, 13/38t; San 22581.Cwe To 45***49.Pi 450/337.03/7/06, P Gamble,Reinsated.San 23102.Pg & C Roberts | 1 |
F1-1-1 Axle,Fixed, L.S.D, 29kph, 453/33390,453/M0809
| 13***16 | Bolt, M16x70l | 28 |
| 14***0Z | Washer, Plain | 8 |
| 16***80 | Plate, Loader Spreader | 2 |
F1-9-1 Ram,Sway, Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***2Z | Bolt | 2 |
F1-11-1 Front Axle Mounting, 28"Wheel
| 15***01 | Axle, Lockstop | 2 |
| 16***80 | Plate, Loader Spreader | 2 |
| 33***93 | Spacer, 28" Wheel Front Axle | 2 |
F1-1-5 Axle,Fixed, L.S.D, 33 Kph, 453/33270,34810
| 13***6Z | Bolt, 11" Long | 0 |
| 13***16 | Bolt, M16x70l | 28 |
| 16***80 | Plate, Loader Spreader | 2 |
F1-4-6 Crown Wheel & Pinion
| 45***00 | Differential, Assembly | 1 |
| 45***70 | Gear, Crown Wheel & Pinion, 13/33t | 1 |
| 82***80 | Bolt | 12 |
F1-5-4 Differential, Components
| 13***18 | Bolt | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-2-8 Differential Assy, Sway,Maxtrac,33kph, Axle 453/33360
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-2-3 Differential Assy, Sway,L.S.D. 29kph, Axle 453/33410
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-20-1 Axle, Pad Mounted, Shims
| 15***09 | Shim, Axle, 3mm Thick, Shim, Axle, 3mm Thick; See Note 2. Axle Shim | 0 |
F1-2-6 Differential Assy, Fixed,Maxtrac,33 Kph, Axle 453/33280
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-6-1 Brake Components, Front Axle, 453/33390,380,410,400,270,280,370,360
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***13 | Pin, Reaction | 6 |
F1-8-1 Axle Power Trackrod, Installation, 453/33390,380,410,400,270,280,370,360
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-4-5 Crown Wheel & Pinion, Axle 453/34330
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***70 | Gear, Crown Wheel & Pinion, 13/33t | 1 |
| 45***46 | Gear, Crown Wheel And, Pinion | 1 |
F1-5-3 Differential, Components, Axle 453/33280,33360
| 13***18 | Bolt | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-10-1 Trunnion Mountings, For Differentials, Axle 453/33410,453/33400
| 41***00 | Sealant | 1 |
| 44***02 | Sleeve | 1 |
| 44***03 | Dowel, Ring | 4 |
F1-1-9 Axle,Fixed, L.S.D, 40 Kph, Axle 453/34330,453/34800
| 13***6Z | Bolt, 11" Long | 0 |
| 13***16 | Bolt, M16x70l | 28 |
| 16***80 | Plate, Loader Spreader | 2 |
F1-1-3 Axle,Sway, L.S.D.29kph, 453/33410
| 14***0Z | Washer, Plain | 8 |
| 16***72 | Plate, Spacer | 2 |
| 22***82 | Circlip | 2 |
F1-4-2 Crown Wheel & Pinion, 453/33380,33400
| 45***00 | Differential, Assembly | 1 |
| 45***72 | Gear, Crown Wheel & Pinion, 11/37t; San 22581.Cwe To 45***52.Pi 450/337.30/06/6, Pg.San 23102.Reinstate 45***72.C Roberts | 1 |
| 45***52 | Gear, Crownwheel & Pinion, 11t/37t | 1 |
F1-5-1 Differential, Components, Axle 453/33390,410,270,370,4330
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F1-4-3 Crown Wheel & Pinion, Axle 453/33270,33370
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***49 | Gear, Crownwheel/Pinion Rh, Spiral, 13t/38t, M30 | 1 |
| 45***58 | Gear, Crown Wheel & Pinion, 13/38t; San 22581.Cwe To 45***49.Pi 450/337.03/7/06, P Gamble,Reinsated.San 23102.Pg & C Roberts | 1 |
F1-1-10 Axle,Fixed, Maxtrac,40kph, 453/34390,453/M0812
| 13***6Z | Bolt, 11" Long | 0 |
| 13***16 | Bolt, M16x70l | 28 |
| 16***80 | Plate, Loader Spreader | 2 |
F1-1-2 Axle,Fixed, Maxtrac,29 Kph, 453/33380
| 13***16 | Bolt, M16x70l | 28 |
| 14***0Z | Washer, Plain | 8 |
| 16***80 | Plate, Loader Spreader | 2 |
F1-1-7 Axle,Sway, L.S.D, 33 Kph, 453/33370
| 14***0Z | Washer, Plain | 8 |
| 16***80 | Plate, Loader Spreader | 2 |
| 22***82 | Circlip | 2 |
F1-1-6 Axle,Fixed, Maxtrac,33 Kph, Axle 453/33280,M0804
| 13***6Z | Bolt, 11" Long | 0 |
| 13***16 | Bolt, M16x70l | 28 |
| 16***80 | Plate, Loader Spreader | 2 |
F1-2-7 Differential Assy, Sway,L.S.D,33 Kph, Axle 453/33370
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-2-1 Differential Assy, Fixed,L.S.D. 29kph, 453/33390
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-4-1 Crown Wheel & Pinion, Axle 453/33390,33410
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***72 | Gear, Crown Wheel & Pinion, 11/37t; San 22581.Cwe To 45***52.Pi 450/337.30/06/6, Pg.San 23102.Reinstate 45***72.C Roberts | 1 |
| 45***60 | Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***38 & 45***24. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***08 & 45***47. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***51 & 45***34. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***51 * 45***34. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***39 & 45***52. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***08 & 15***47. See Ti Gen209 | 1 |
F1-2-5 Differential Assy, Fixed,L.S.D, 33 Kph, Axle 453/33270
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-2-10 Differential Assy, Fixed,Maxtrac,40 Kph, Axle 453/34390
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-1-8 Axle,Sway, Maxtrac,33 Kph, Axle 453/33360
| 14***0Z | Washer, Plain | 8 |
| 16***80 | Plate, Loader Spreader | 2 |
| 22***82 | Circlip | 2 |
F1-1-4 Axle,Sway, Maxtrac,29 Kph, 453/33400
| 14***0Z | Washer, Plain | 8 |
| 16***72 | Plate, Spacer | 2 |
| 22***82 | Circlip | 2 |
F2-6-2 Shaft,Drive, 448/58180
| 91***01 | Driveshaft | 1 |
| 91***46 | Shaft, Hub | 1 |
| 91***48 | Shaft, Diff Side | 1 |
F2-4-1 Hub & Components
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***82 | Circlip | 2 |
F2-1-2 Axle Assembly,Rear, Trunnion Mntd,Ps760, 448/58180,448/58580
| 10***01 | Nut | 20 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-2-1 Differential, Assembly
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F2-1-1 Axle Assembly,Rear, Trunnion Mntd,Ps750, 448/56760
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-6-1 Shaft Drive
| 91***01 | Driveshaft | 1 |
| 91***46 | Shaft, Hub | 1 |
| 91***48 | Shaft, Diff Side | 1 |
F2-2-2 Differential, Assembly, Axle 448/58180
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F2-5-1 Ram,Steering,Rear, Axle Installation
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-5-2 Ram,Steering,Rear, Axle Installation, Axle 448/58180
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-4-2 Hub & Components, 448/58180
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***82 | Circlip | 2 |
F2-11-1 Rear Axle Mounting, 28"Wheel
| 13***2Z | Bolt, M12 X 50mm | 2 |
| 13***3Z | Bolt, M20 X 2.5 X 130mm | 6 |
| 13***3Z | Nut, M12 | 2 |
F3-1-20 Drive Shaft, Universal, Joints (Spider Kits)
| 91***02 | Kit-Spider | 1 |
| 91***03 | Kit-Spider, 82mm Over Caps, 27mm Dia. | 1 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 1 |
F3-3-1 Axle Lock Stop, Installation
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 2 |
| 15***01 | Axle, Lockstop | 2 |
F3-1-1 Propshafts, Ps750 Transmission
| 11***25 | Strap | 6 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
| 82***72 | Bolt, M12 X 35mm | 4 |
F3-2-1 Wheels & Tyres, 531-70
| 15***01 | Valve | 2 |
| 16***75 | Wheel, And Tyre Assembly, 12x9r24 X-Mine D2 | 4 |
| 16***77 | Wheel, & Tyre 15.5 R25 Xha, Rad.L3 Mich | 4 |
F3-2-3 Wheels & Tires, 531-70 & 541-70
| 15***01 | Valve | 2 |
| 16***75 | Wheel, And Tyre Assembly, 12x9r24 X-Mine D2 | 4 |
| 16***77 | Wheel, & Tyre 15.5 R25 Xha, Rad.L3 Mich | 4 |
F3-1-2 Propshafts, Ps760 Transmission
| 11***25 | Strap | 6 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
| 82***72 | Bolt, M12 X 35mm | 4 |
F3-2-2 Wheels & Tyres, 541-70
| 15***01 | Valve | 2 |
| 16***75 | Wheel, And Tyre Assembly, 12x9r24 X-Mine D2 | 4 |
| 16***77 | Wheel, & Tyre 15.5 R25 Xha, Rad.L3 Mich | 4 |
F5-3-1 Clutch Unit,4 Wd, Ps750, 449/M0112
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F5-4-1 Mainshaft,Clutch, Components, 449/M0113,449/M0112
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F5-11-2 Switch,Solenoids &, Adaptor, 449/13150
| 13***8Z | Screw, M8x30 | 14 |
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 1 |
F5-9-1 Dipstick, Transmission,Ps750
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***00 | Nut, Sealastic | 1 |
F5-8-1 Torque Convertor, Plate & Couplings, Ps750,11"
| 04***00 | Converter, 11" | 1 |
| 04***68 | Kit, Drive Plate | 1 |
| 33***14 | Damper, Vibration,Short | 1 |
F5-15-1 Gearbox To Engine, Fasteners
| 13***9Z | Bolt; Replaces 60***09 | 7 |
| 13***3Z | Bolt | 3 |
| 13***9Z | Capscrew, M10 X 35mm | 1 |
F5-10-1 Breather, Ps750
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***05 | Adapter | 1 |
| 32***64 | Breather | 1 |
F5-7-1 Clutch,Reverse, Transmission, 449/M0113,449/M0112
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 33***61 | Plate, Pressure, 6mm | 2 |
F5-13-1 Transmission, Mountings,Ps750
| 13***3Z | Bolt, M12x55 | 3 |
| 13***8Z | Bolt, M16 X 80 | 2 |
| 13***2Z | Bolt, M16 X 120 | 1 |
F5-1-2 Transmission,2/4wd, Permanent,449/M0112
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
| 44***00 | Kit-Shim | 1 |
F5-0-2 Transmission/Gearbox, Layout Ps750
| 13***1Z | Bolt, M12 X 45 | 2 |
| 14***9Z | Washer | 2 |
| 44***03 | Cover, Flywheel Housing, 110mm X 79mm X 17mm | 1 |
F5-5-1 Layshaft Components, Transmission, 449/M0113,449/M0112
| 22***15 | Circlip | 1 |
| 33***60 | Plate, Pressure, 4mm | 1 |
| 44***04 | Retainer, Spring | 1 |
F5-0-3 Transmission/Gearbox, Identification
| 45***30 | Transmission, Bevel,Ps750,4wd, Permanent | 1 |
| 45***01 | Transmission, Bevel,Ps750 | 1 |
| 45***02 | Transmission, Bevel,Ps750 | 1 |
F5-6-1 Clutch,Input, Transmission, 449/M0113,449/M0112
| 13***1Z | Bolt, M8 X 45 | 6 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
| 20***27 | Pump | 1 |
F5-12-1 Transmission, External Pipework, 449/M0113
| 13***3Z | Bolt, M8 X 55 | 2 |
| 14***08 | Seal, Washer | 2 |
| 14***11 | Seal, Bonded | 2 |
F5-16-5 Bevel Gearbox Kits
| 45***34 | Kit, Bevel Pinion & Gear, Ps750 | 1 |
F5-5-2 Layshaft Components, Ps750, 449/13080
| 22***15 | Circlip | 1 |
| 33***60 | Plate, Pressure, 4mm | 1 |
| 44***04 | Retainer, Spring | 1 |
F5-2-1 Transmission,Perm, 4wd,Ext Components, 449/M0113
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***0Z | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
F5-4-2 Mainshaft,Clutch, Components, 449/13080
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F5-1-1 Transmission,4wd, Permanent,449/M0113
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
| 44***12 | Spacer | 1 |
F5-16-1 Bevel Gearbox, Transmission,11"T/C
| 14***08 | Seal, Washer | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F5-14-1 Transmission, Oil Cooler & Hoses, Common Rail
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***3Z | Bolt, M8 X 55 | 1 |
| 65***53 | Hose, Lp 5/8"Bsp 1775mm | 1 |
F5-1-3 Transmission,4wd, Permanent, 449/13080
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
| 44***12 | Spacer | 1 |
F5-14-5 Transmission, Oil Cooler Hoses, Tier 3 Mech Engine
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***5Z | Bolt, M12x20 | 1 |
F5-9-2 Dipstick, Transmission,Ps750, Tier 3 Mech Engines
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***00 | Nut, Sealastic | 1 |
F5-14-2 Transmission, Oil Cooler, Tier 3 Mech Engine
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 2 |
F5-11-1 Switch Solenoids &, Adaptor Block, 449/M0113,449/13080
| 13***8Z | Screw, M8x30 | 14 |
| 13***1Z | Bolt, M8 X 45 | 6 |
| 13***8Z | Capscrew, M5 X 30 | 12 |
F6-14-10 Cooler Hoses, Transmission,Ps760
| 65***13 | Pipe, Return, Trans/Oil Cooler | 1 |
| 65***15 | Pipe, Feed, Trans/Oil Cooler | 1 |
F6-2-2 Transmission,4 Speed, External Components, Ps760,Clutch,442/00850
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***09 | Screw, M10x35 | 11 |
| 13***11 | Screw, M10x45 | 21 |
F6-14-2 Transmission, Oil Cooler & Hoses, 125bhp Engine, 6 Speed Transmission
| 16***52 | I.A, Abi Cooling System, 93 Kw | 1 |
| 16***54 | I.A, Abi Cooling System -, 93 Kw | 1 |
| 30***18 | Cooler, Combination, Rad/Cac/Trans-Oil | 1 |
F6-0-3 Transmission/Gearbox, Identification
| 45***94 | Transmission, Bevel,4 Speed,Clutch | 1 |
| 45***96 | Transmission, Bevel | 1 |
| 45***99 | Transmission, Bevel,Var Pump | 1 |
F6-11-1 Solenoid Switches, & Pipework,4 Speed, 442/00860
| 13***03 | Capscrew, M8 X 16 | 6 |
| 13***7Z | Capscrew | 8 |
| 14***11 | Seal, Bonded | 1 |
F6-8-1 Torque Convertor, Plate Couplings, Ps760
| 04***66 | Convertor, Torque | 1 |
| 04***68 | Kit, Drive Plate | 1 |
| 33***14 | Damper, Vibration,Short | 1 |
F6-9-1 Dipstick, Transmission Ps760
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***00 | Nut, Sealastic | 1 |
F6-3-1 Clutch-Input,4 Wd, 4 Speed,Ps760, 442/00860,442/00850
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F6-13-1 Transmission, Mountings,Ps760
| 13***3Z | Bolt, M12x55 | 1 |
| 13***4Z | Bolt, M12 X 60mm | 2 |
| 13***8Z | Bolt, M16 X 80 | 2 |
F6-12-1 Transmission,Ps760, External Pipework
| 04***66 | Convertor, Torque | 1 |
| 04***68 | Kit, Drive Plate | 1 |
| 13***3Z | Bolt, M8 X 55 | 2 |
F6-11-2 Solenoid Switches, & Pipework,Ps760, 442/00850
| 13***03 | Capscrew, M8 X 16 | 7 |
| 13***7Z | Capscrew | 8 |
| 14***11 | Seal, Bonded | 1 |
F6-14-1 Transmission, Oil Cooler & Hoses
| 16***48 | G.A, Abi Cooling System L, 74.2 Kw | 1 |
| 16***50 | G.A, Abi Cooling Syst Rev, 74.2 Kw | 1 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 2 |
F6-7-1 Clutch Assembly, 4wd,Shaft
| 13***07 | Capscrew, M5 X 25 | 4 |
| 33***16 | Plate, Counter, Clutch | 8 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
F6-16-5 Bevel Gearbox Kit, Ps760
| 45***84 | Kit, Gear & Pinion Assembly, Ps760 | 1 |
F6-1-2 Transmission,4wd, Clutch,4 Speed,Ps760, 442/00850
| 13***14 | Bolt, M10 X 60 | 8 |
| 41***12 | Multigasket | 0 |
| 44***50 | Gearbox, Ga,Ps760 4 Speed, 1:1.483 4wd Clutch | 0 |
F6-15-1 Speed Sensor, 4 Spd
| 71***23 | Sensor, Engine/Transmission, Speed. | 1 |
F6-16-2 Transmission,Ps760, Bevel Gearbox, Variable Pump
| 14***08 | Seal, Washer | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F6-5-1 Clutch,Mainshaft, & Components,Ps760, 442/00860,442/00850
| 33***16 | Plate, Counter, Clutch | 8 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F6-14-3 Transmission, Oil Cooler & Hoses, Variable Pump Machine
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***3Z | Bolt, M8 X 55 | 1 |
| 65***53 | Hose, Lp 5/8"Bsp 1775mm | 1 |
F6-13-2 Transmission, Mountings,Ps760, Variable Pump
| 13***4Z | Bolt, M12 X 60mm | 3 |
| 13***8Z | Bolt, M16 X 80 | 2 |
| 13***2Z | Bolt, M16 X 120 | 1 |
F6-2-1 Transmission,4 Speed, External Components, Ps760,Permanent,442/00860
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***09 | Screw, M10x35 | 11 |
| 13***11 | Screw, M10x45 | 21 |
F6-16-1 Transmission,Ps760, Bevel Gearbox
| 14***08 | Seal, Washer | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F6-0-2 Transmission/Gearbox, Layout,Ps760
| 13***1Z | Bolt, M12 X 45 | 2 |
| 14***9Z | Washer | 2 |
| 44***03 | Cover, Flywheel Housing, 110mm X 79mm X 17mm | 1 |
F6-10-1 Breather,Ps760
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***05 | Adapter | 1 |
| 32***64 | Breather | 2 |
F6-6-1 Clutch,Layshaft, & Components,Ps760, 442/00860,442/00850
| 33***16 | Plate, Counter, Clutch | 8 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F6-4-1 Clutch,Reverse,Ps760, 4wd,4 Speed, 442/00860,442/00850
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F6-1-1 Transmission,4wd, Permanent,4 Speed, Ps760,442/00860
| 13***08 | Bolt, M10 X 30 | 8 |
| 41***12 | Multigasket | 0 |
| 44***60 | Gearbox, Ga Ps760,4 Speed, 1:1.483 Perm | 1 |
F7-0-2 Transmission/Gearbox, Layout,Ps760,6 Speed
| 13***1Z | Bolt, M12 X 45 | 2 |
| 14***9Z | Washer | 2 |
| 44***03 | Cover, Flywheel Housing, 110mm X 79mm X 17mm | 1 |
F7-16-1 Transmission, Bevel Gearbox,Ps760
| 14***08 | Seal, Washer | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F7-5-1 Shaft Assembly, Mainshaft Clutch
| 33***16 | Plate, Counter, Clutch | 9 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F7-4-1 Shaft Assembly, Reverser Clutch
| 33***16 | Plate, Counter, Clutch | 12 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F7-16-2 Transmission,Bevel, Gearbox,Ps760, Variable Pump
| 14***08 | Seal, Washer | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F7-14-11 Cooler Hoses, Transmission,Ps760, 6 Speed,Variable Pump
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***3Z | Bolt, M8 X 55 | 1 |
| 65***55 | Hose, 5/8" Bsp 1175mm | 1 |
F7-0-3 Transmission/Gearbox, Identification
| 45***30 | Transmission, Bevel,Ps760,Elec 2/4, 6 Speed | 1 |
| 45***70 | Transmission, Bevel,Ps760,Perm, 6 Speed | 1 |
| 45***50 | Transmission, Bevel Ps760,6 Speed, 2/4wd,Variable Pump | 1 |
F7-11-2 Solenoid Switches, & Pipework, 442/27690
| 13***03 | Capscrew, M8 X 16 | 8 |
| 13***17 | Capscrew | 8 |
| 14***11 | Seal, Bonded | 1 |
F7-13-1 Transmission, Mountings,Ps760, 6 Speed
| 13***3Z | Bolt, M12x55 | 1 |
| 13***4Z | Bolt, M12 X 60mm | 2 |
| 13***8Z | Bolt, M16 X 80 | 2 |
F7-13-2 Transmission, Mountings,Ps760, 6 Speed,Variable Pump
| 13***4Z | Bolt, M12 X 60mm | 3 |
| 13***8Z | Bolt, M16 X 80 | 2 |
| 13***2Z | Bolt, M16 X 120 | 1 |
F7-9-1 Dipstick, Transmission Ps760, 6 Speed
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
F7-12-1 Transmission, External Pipework
| 04***91 | Kit, Driveplate W300, Ps760 Bevelbox | 1 |
| 04***68 | Convertor, W300,2.52 Ratio, Luc | 1 |
| 13***3Z | Bolt, M8 X 55 | 2 |
F7-11-1 Solenoid Switches, & Pipework, 442/27770
| 13***03 | Capscrew, M8 X 16 | 7 |
| 13***17 | Capscrew | 8 |
| 14***11 | Seal, Bonded | 1 |
F7-14-10 Cooler Hoses, Transmission,Ps760, 6 Speed
| 65***13 | Pipe, Return, Trans/Oil Cooler | 1 |
| 65***37 | Pipe, Assembly, Trans/Cooler Feed | 1 |
F7-10-1 Breather, Ps760,6 Speed
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***05 | Adapter | 1 |
| 32***64 | Breather | 2 |
F7-9-2 Dipstick, Transmission,Ps760, 6 Speed
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
F7-3-1 Shaft Assembly, Input Clutch,Luc
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F7-2-1 External Components, 4 Wd,Permanent, 442/27700
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***08 | Bolt, M10 X 30 | 8 |
| 13***09 | Screw, M10x35 | 11 |
F7-15-1 Shaft Assembly, 4wd Clutch,Ps760, 442/27560,442/27700
| 13***07 | Capscrew, M5 X 25 | 4 |
| 33***16 | Plate, Counter, Clutch | 8 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
F7-6-1 Shaft Assembly, Layshaft Clutch, 442/27570,27700
| 33***16 | Plate, Counter, Clutch | 8 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F7-8-1 Torque Convertor, Ps760,6 Speed
| 04***03 | Bolt | 4 |
| 04***02 | Bolt, M8 X 20 | 6 |
| 04***91 | Kit, Driveplate W300, Ps760 Bevelbox | 1 |
F7-1-2 Transmission,4 Wd, Clutch,6 Speed, 442/27690
| 13***08 | Bolt, M10 X 30 | 8 |
| 41***12 | Multigasket | 0 |
| 44***90 | Gearbox, Ga Ps760,6 Speed, 1:1.720 Luc,4wd Clu | 0 |
F7-1-1 Transmission,4wd, Permanent,6 Speed, 442/27700
| 13***08 | Bolt, M10 X 30 | 8 |
| 41***12 | Multigasket | 0 |
| 44***00 | Gearbox, Ps760,6 Speed | 0 |
F7-16-5 Bevel Gearbox Kits, Ps760
| 45***31 | Kit, Bevel Pinion & Gear, Ps760 6 Speed | 1 |
F7-2-2 External Components, 4wd,Clutch,6 Speed, 442/27690
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***09 | Screw, M10x35 | 11 |
| 13***11 | Screw, M10x45 | 19 |
F7-7-1 Shaft Assembly, 6 Speed Clutch
| 33***16 | Plate, Counter, Clutch | 5 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 0 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
G Brakes
G1-10-2 Brake Parking,Ps760
| 13***1Z | Bolt | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 4 |
| 22***43 | Circlip | 1 |
G1-5-4 Brake Hoses & Pipes, Installation, Sway Chassis,Servo
| 12***95 | Clip, Harness Support | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***4Z | Washer | 2 |
G1-1-4 Brake System,Servo, Installation, Sway Chassis
G1-5-3 Brake Pipes & Hoses, Installation, Sway,Chassis
| 14***4Z | Washer | 2 |
| 15***00 | Nut | 1 |
| 26***51 | Pipe, Brake | 1 |
G1-1-2 Brake System,Servo, Installation, Fixed Chassis
G1-1-6 Brake System,Servo, Installation, Fixed Chassis,Trailer Brake
G1-5-7 Brake Pipes & Hoses, Installation, Sway Chassis,Trailer Brakes
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer | 2 |
| 15***00 | Adapter, 'T' | 1 |
G1-5-6 Brake Pipes & Hoses, Installation, Fixed Chassis,Servo Trailer Brakes
| 12***95 | Clip, Harness Support | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-4-1 Brake Reservoir
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 15***00 | Brake, Reservoir | 1 |
G1-1-1 Brake System, Installation, Fixed Chassis
| 13***7Z | Screw, Star Drive, M10 X 25 | 2 |
| 24***03 | Grommet, Blind,Hole Dia 9.5mm, Panel Thkness 2-3mm | 3 |
| 32***06 | Plate, Blanking, Ldpto Access | 1 |
G1-3-1 Brake Pedal
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***2Z | Washer, M20 | 1 |
G1-1-8 Brake System,Servo, Installation, Sway Chassis,Trailer Brakes
G1-5-2 Brake Pipes & Hoses, Installation, Fixed Chassis,Servo
| 12***95 | Clip, Harness Support | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***4Z | Washer | 1 |
G1-5-5 Brake Pipes & Hoses, Installation, Fixed Chassis,Trailer Brakes
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer | 1 |
| 15***00 | Adapter, 'T' | 1 |
G1-1-5 Brake System, Installation, Fixed Chassis,Trailer Brake
| 13***7Z | Screw, Star Drive, M10 X 25 | 2 |
| 24***03 | Grommet, Blind,Hole Dia 9.5mm, Panel Thkness 2-3mm | 3 |
| 32***06 | Plate, Blanking, Ldpto Access | 1 |
G1-5-8 Brake Pipes & Hoses, Installation, Sway Chassis,Servo Trailer Brakes
| 12***95 | Clip, Harness Support | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-6-1 Servo Brake
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 15***55 | Brake, Remote Servo | 1 |
G1-10-1 Brake Parking,Ps750
| 15***72 | Caliper,Parkbrake | 1 |
| 33***59 | Bracket, Brake Caliper Mount, Hayes Caliper | 1 |
| 33***89 | Bracket, Reaction | 1 |
G1-2-1 Master Cylinder
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***2Z | Nut, Lock | 1 |
G1-1-7 Brake System, Installation, Sway Chassis,Trailer Brake
| 13***7Z | Screw, Star Drive, M10 X 25 | 2 |
| 24***03 | Grommet, Blind,Hole Dia 9.5mm, Panel Thkness 2-3mm | 3 |
| 32***06 | Plate, Blanking, Ldpto Access | 1 |
G1-7-1 Brake Components, Axle Arm
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 1 |
G1-5-1 Brake Pipes & Hoses, Installation, Fixed Chassis
| 14***4Z | Washer | 1 |
| 26***51 | Pipe, Brake | 1 |
| 64***00 | Hose, Brake | 1 |
G1-1-3 Brake System, Installation, Sway Chassis
| 13***7Z | Screw, Star Drive, M10 X 25 | 2 |
| 24***03 | Grommet, Blind,Hole Dia 9.5mm, Panel Thkness 2-3mm | 3 |
| 32***06 | Plate, Blanking, Ldpto Access | 1 |
G1-15-1 Brake Caliper, Parking
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
| 15***03 | Kit-Pad, Brake Pad | 1 |
| 15***72 | Caliper,Parkbrake | 1 |
V Jcb444 Engine Installation, Components
V41-11-1 Engine Assembly, 320/40216,84bhp Mt3, See Catalogue 9812/2350
| 32***16 | Engine, Complete 63kw 12v, Tc Mech Tier 3 Fh2 Voith | 1 |
| 33***00 | G.A, Engine Build 63kw, Tier 3 Mech | 1 |
| 33***25 | G.A, Engine Build 63kw, Tier 3 Mech Rev | 1 |
V41-13-1 Engine Assembly, 320/40124,114bhp Mt3, See Catalogue 9812/2350
| 32***24 | Engine, Complete 74k 12v, Tca Mechtier 3 Voith | 1 |
| 33***50 | G.A, Engine Build 85kw, Lsv Mt3 | 1 |
| 33***75 | G.A, Engine Build 85kw, Lsv Mt3 Rev | 1 |
V41-1-1 Engine Assembly, 320/40098,130bhp T3, See Catalogue 9812/2300
| 32***98 | Engine, Assembly,Tca 130bhp, Voith Coupling | 1 |
V41-2-1 Engine Assembly, 320/40100,130bhp T3, See Catalogue 9812/2300
| 32***00 | Engine, Assembly,Tca 130bhp, V/Coupling Hdpto | 1 |
V41-12-1 Engine Assembly, 320/40201,99bhp Mt3, See Catalogue 9812/2350
| 32***01 | Engine, Complete 74kw 12v, Tca Mech Tier 3 Fh2 Voith | 1 |
| 33***00 | G.A, Engine Build 74kw, Tier 3 | 1 |
| 33***25 | G.A, Engine Build 74kw, Tier 3 Mech Rev | 1 |
V42-1-1 Engine Mounting, Bolts
| 13***9Z | Bolt; Replaces 60***09 | 7 |
| 13***4Z | Bolt | 3 |
| 13***9Z | Capscrew, M10 X 35mm | 1 |
V43-2-1 Filter, Air, Turbo
| 12***52 | Spacer | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
V44-3-1 Air Induction Hoses, Aspirator Option, Turbo Crt3
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***7Z | Bolt, M10x25 | 2 |
V44-13-1 Air Induction Hoses, Aspirator Option, Turbo Mt3
| 13***5Z | Bolt | 2 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
V44-2-1 Air Induction Hoses, Turbo Crt3
| 16***74 | Adapter, Vacuum Sensor | 1 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
| 22***15 | Clip, Jubilee | 1 |
V44-12-1 Air Induction Hoses, Turbo Mt3
| 16***74 | Adapter, Vacuum Sensor | 1 |
| 22***15 | Clip, Jubilee | 2 |
| 22***16 | Clip, Jubilee | 1 |
V45-2-1 Exhaust System, Turbo
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
| 16***84 | Silencer, Turbo Exhaust, 125bhp | 1 |
V46-3-1 Guard, Alternator Belt
| 13***5Z | Bolt | 5 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
V46-11-1 Radiator, Fittings & Mountings, Mt3
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
V46-1-1 Radiator, Fittings & Mountings, Crt3
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***7Z | Bolt, M10x25 | 3 |
| 13***3Z | Bolt, M10 X 130 | 2 |
V47-1-1 Combination Cooler
| 30***40 | Combination, Rad/Oil Cooler/Cac | 1 |
V48-2-1 Radiator & Hoses, Crt3
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
V48-11-2 Charge Air Cooler, Installation Crt3
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 16***49 | Pipe, Assembly Cac 2 | 1 |
V48-12-1 Radiator & Hoses, Mt3
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***7Z | Screw, M10 X 25 | 1 |
| 14***4Z | Washer | 1 |
V48-21-1 Charge Air Cooler, Installation Mt3
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***11 | Clip, Jubilee | 1 |
V48-11-1 Charge Air Cooler, Installation Crt3
| 13***5Z | Screw, M10 X 20 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 16***49 | Pipe, Assembly Cac 2 | 1 |
V49-20-1 Lower Idler Pulley, Small
| 13***9Z | Screw, Star Drive, M8 X 35 | 2 |
| 13***1Z | Screw, Star Drive, M8 X 45 | 1 |
| 16***61 | G.A, Non A/C Fead | 1 |
V49-2-1 Front End Drive, Accessory, No Cooling Fan
| 16***61 | G.A, Non A/C Fead | 1 |
| 32***64 | Pulley, Idler | 1 |
| 32***99 | Belt, Drive, L=1855 | 1 |
V49-1-1 Cooling Fan & Spacer, Crt3
| 16***45 | G.A, Abi Cooling Pack, 108kw Tier 3 | 1 |
| 20***78 | Key, Woodruff, 3.2 X 6.5 X 16dia | 1 |
| 20***79 | Nut, M12 X 1.5 | 1 |
V49-3-1 Front End Drive, Accessory, With Air Conditioning
| 16***33 | G.A, A/C Fead (No Fan) | 1 |
| 32***30 | Pulley, Idler, Long | 1 |
| 32***64 | Pulley, Idler | 1 |
V49-11-1 Cooling Fan & Spacer, Mt3
| 20***78 | Key, Woodruff, 3.2 X 6.5 X 16dia | 1 |
| 20***79 | Nut, M12 X 1.5 | 1 |
| 20***28 | Washer, Tab | 1 |
V50-1-1 Fuel Pipes, Fuel Tank To Filter, Crt3
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
V51-11-1 Filter, Fuel Sediment Mt3
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
| 32***08 | Bowl, Assembly | 1 |
V51-1-1 Filter, Fuel Sediment Crt3
| 16***41 | G.A, Sedimentor-108kw | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
V52-1-1 Exhauster, Servo Brakes
| 13***8Z | Screw, Star Drive, M10 X 30 | 2 |
| 16***37 | Exhauster, Assembly | 1 |
| 16***38 | G.A, Exhauster Installati | 1 |
V53-1-1 Speed Sensor, Lock-Up Tranmissions
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 16***54 | G.A, Sa Speed Sensor | 1 |
V54-1-1 Fuel Rail Protector
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 33***66 | Bracket, Rail Protection | 1 |
V55-11-1 Oil Level Dipstick, & Tube (Long) Mt3
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
| 13***3Z | Screw, Star Drive, M8 X 16 | 1 |
| 32***27 | O Ring | 1 |
V56-1-1 Compressor, Air Conditioning
| 13***0Z | Bolt, Star Drive, M8 X 100mm | 3 |
| 16***33 | G.A, A/C Fead (No Fan) | 1 |
| 32***62 | Compressor, Air Conditioning, 12v | 1 |
V57-1-1 Engine Oil Drain
| 16***74 | G.A, Sump Drain Kit, Scout | 1 |
| 25***62 | Plug, Oil Drain | 1 |
| 33***28 | Tube, Oil Sump Drain | 1 |
V58-1-1 Oil Breather Hose, Ccv Filter Crt3
| 22***08 | Clip, Jubilee | 1 |
| 34***79 | I.A, Engine Breather | 1 |
| 82***44 | Tie, Cable, 200mm Long | 2 |
V58-11-1 Oil Breather Hose, Ccv Filter Mt3
| 22***07 | Clip, Jubilee | 1 |
| 26***00 | Clip | 1 |
| 33***44 | Hose, Engine Breather, Vent To Atmosphere | 1 |
531-70 serial number reference
On JCB Loadall telehandlers including the 531-70, the machine identification plate is located on the chassis or cab frame, typically near the cab step or boom-pivot area. The serial number is also stamped into the chassis frame as a backup if the plate is unreadable. Verify the specific configuration against the stamped frame digits.
| Prefix | Identifies | Notes |
|---|---|---|
| 1522574 | Applicability: JCB 531-70 (Standard Build). Sourced from factory service manual applications table (Pub the OEM part reference-2). Range extends to TBA (To Be Advised) in the source document. | |
| 3437437 | Applicability: JCB 531-70. Sourced from used machinery listing for a unit with 338 operating hours. This serial falls within the 5A group range but indicates a later build date than the start of the 1522574 range. |
Frequently asked questions
What engine does the JCB 531-70 use?
The JCB 531-70 uses a JCB Dieselmax naturally aspirated engine with 4 cylinders, 63 hp gross power, and 268.6 cu in displacement. Later Stage V models use a 55 kW (75 hp) Dieselmax engine with DPF.
What is the operating weight of the JCB 531-70?
Operating weight varies by configuration, ranging from 7,825 kg (17,251 lb) to 8,320 kg (18,342 lb).
What replaced the JCB 531-70?
The JCB 531-70 was succeeded by the Stage V compliant 531-70, which features a 55 kW (75 hp) Dieselmax engine with a DPF/DOC after-treatment package.
What 531-70 owners discuss
What are the common powertrain and transmission behaviors reported for the JCB 531-70?
Operators report a slight clunk when changing gears, which is often an exaggeration of normal wear in the 4-speed powershift transmission. Common transmission issues include missing gears or intermittent loss of forward/reverse engagement. This is frequently caused by hardened seals or worn cases in the gear solenoids. Checking the transmission strainer gauze during oil changes is recommended practice to mitigate debris-related failures. The machine uses a hydrostatic transmission with infinite speed variations and permanent 4-wheel drive with epicyclic hub reduction axles.
What electrical or sensor issues are typical for this machine?
Owners frequently report deeply ingrained electrical issues, including ticking relays and flickering lights. A specific, recurring fault involves the starter motor circuit, where loose connections cause intermittent no-start conditions. In some cases, the issue was traced to a loose wire connection on the starter terminal, accessible by removing the large panel under the engine. Additionally, machines with Ecomaxx engines may experience CAN bus configuration errors when programming injector codes, requiring verification of the connection type (POWERTRAIN vs. MACHINE) near the DLA connector.
What are the known engine quirks per series for the JCB 531-70?
The JCB 531-70 utilizes the JCB Dieselmax engine. Later Stage V compliant models feature a combined DPF/DOC after-treatment package that achieves emissions levels without DEF injection. Earlier Tier 3 variants used turbocharged and after-cooled engines with power outputs ranging from 63 kW to 97 kW depending on the specific build code. Owners of older units have noted the need to manually crank the engine via a lead shorting the starter terminal if the electrical fault persists, indicating a robust but electrically sensitive starting system in some serial ranges.
What undercarriage or wear patterns are typical for this telehandler type?
The machine features JCB epicyclic hub reduction drive/steer axles with Max-Trac torque proportioning differentials. Wear patterns often involve the wet brake systems within the axles, necessitating regular checks of the transmission oil temperature and pressure. The boom design, which avoids welded joints at key stress points, is noted for durability under strain. Operators should monitor the hydraulic system oil level via the sight glass, as the total capacity varies by attachment configuration, and ensure the hydraulic pump suction strainer is clean to prevent flow issues.
What is a common joystick or control issue reported by owners?
Intermittent joystick failure is a reported issue, particularly when using heavy attachments like hay round bale grabs. The fault may manifest as a loss of function for boom raise/lower, attachment tilt/crowd, and tele-in/tele-out controls. Replacing the joystick unit has not always resolved the issue, suggesting the fault may lie in the wiring harness, control switches, or the solenoid valve connections between the controls and the hydraulic circuit.
What safety-critical systems are integrated into the JCB 531-70?
The machine includes a patented load control system and sway frames for stable load placement. Hose burst check valves are installed to protect the driver and bystanders in the event of hydraulic hose failure. Selected models offer reversing camera and pulse radar options for on-site safety. The service brakes are hydraulically activated, self-adjusting, oil-immersed in-board multi-disc types on the front axle, with a hand-operated disc parking brake on the gearbox output.
What should you check when buying a used 531-70?
Verify the serial number range to confirm the specific service manual and engine tier (e.g., SN the OEM part reference to the OEM part reference for earlier 5A builds). Check for loose connections on the starter motor terminal, as this is a known intermittent no-start cause. Inspect the transmission strainer gauze for debris and test the joystick functionality under load. Verify the condition of the hydraulic oil cooler and ensure the CAN bus connection type (POWERTRAIN or MACHINE) is correctly identified if diagnostic programming is required. Have your dealer verify the exact serial range applicability for fluid specifications and emissions package details.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 531-70. Related factory variants of the same model family:
531-70(Tier 3)531-70(Tier 3)
Need a specific 531-70 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.