JCBagriculturaltelescopic handlers (loadall)
Jcb 530 SUPER AG
Maintenance schedule, common problems & OEM parts breakdown
The JCB 530-60 Agri Super is a compact agricultural telehandler designed for livestock farms with narrow aisles and restricted height requirements. It is powered by a 4.8-litre Stage V compliant JCB DieselMAX four-cylinder engine producing 97kW (130hp) and 550Nm of torque. The machine features a maximum lift capacity of three tonnes and a maximum lift height of 6.09m on 24-inch wheels or 5.97m on 20-inch wheels. It utilizes a two-speed hydrostatic transmission and is available in configurations with 20-inch or 24-inch tires to suit indoor or outdoor terrain. The base model 530 series includes variants such as the 530-70, 532-120, 533-105, and 535 series, with the 530-60 Agri Super representing the specific agricultural configuration.
The 530-60 Agri Super replaced the 527-58 AGRI Plus, offering a 25% increase in dynamic tractive effort and improved visibility through a lower engine pod and new mirrors. It introduces JCB Smart Hydraulics with regenerative hydraulics, Smooth Ride System boom suspension, and boom-end damping as standard features. In the used and parts market, this machine is valued for its compact dimensions suitable for barn work, its robust DieselMAX engine known for durability without DEF/DPF complexity, and its high hydraulic efficiency which reduces fuel consumption by 15%. The transition to Stage V emissions compliance marks a significant shift in engine technology for this model line compared to its predecessors.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 530 SUPER AG specifications
Engine
| Model | JCB DieselMAX (530-60 Agri Super); JCB ECOMAX 444 (530-70) |
| Gross Power | 130 hp (97 kW) (530-60 Agri Super); 74 hp (530-70) |
| Displacement | 4.8 L (530-60 Agri Super); 268.6 cu in (4.4 L) (530-70) |
| Cylinders | 4 |
| Emissions Tier | Stage V (530-60 Agri Super) |
Weights
| Operating Weight | 14,021 lb (6,360 kg) (530-60 Agri Super); 14,990 lb (530-70); 6,613.9 lb (older 530 model) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 16.38 ft (4.99 m) (to fork face, older 530 model); 196.0 in (5.0 m) (older 530 model) |
| Transport Width | 7.32 ft (2.23 m) over tires (older 530 model); 2.0 m (6.56 ft) on 20in tires (530-60 Agri Super); 2.1 m (6.89 ft) on 24in tires (530-60 Agri Super) |
| Transport Height | 8.17 ft (2.49 m) (older 530 model); 2.0 m (6.56 ft) on 20in tires (530-60 Agri Super) |
| Wheelbase | 9.03 ft (2.75 m) (older 530 model) |
| Ground Clearance | 1.32 ft (0.40 m) (older 530 model) |
Performance
| Travel Speed | 17.4 mph (28.0 km/h) (older 530 model); 40 km/h (25 mph) (530-60 Agri Super); 30 km/hr (530-70) |
| Max Lift Height | 22.97 ft (7.0 m) (older 530 model); 7 m (530-70) |
| Max Forward Reach | 12.14 ft (3.70 m) (older 530 model); 3,830 mm (12.57 ft) (530-70); 3.27 m (10.7 ft) (530-60 Agri Super) |
| Max Load Capacity | 6,613.87 lb (3,000 kg) (older 530 model); 3,005 kg (530-70) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 33.1 gal (125 L) (older 530 model); 110 L (530-70) |
| Hydraulic System | 29.9 gal (113 L) (older 530 model); 21.7 gpm pump flow (older 530 model) |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
530 SUPER AG fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 12.92 litres (3.41 gal) | JCB Engine Oil Special 15W-40 |
| Cooling System | 12.92 litres (3.41 gal) | 55% Antifreeze mixture (starts to freeze at -36° C / -33° F) |
| Fuel Tank | 110 litres (29.1 gal) | Diesel |
| Transmission / Powertrain | Not specified in source text | JCB Synchoro Shuttle3DX Super |
| Final Drives | Not specified in source text | Not specified in source text |
| Hydraulic System and Tank | 9.27 litres (2.45 gal) | JCB Hydraulic Oil the OEM part reference |
| Axles / Differentials | Not specified in source text | Not specified in source text |
| Grease | N/A | JCB Multipurpose Grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 530 SUPER AG maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 530 SUPER AG beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic tank, axle, and final drive systems to establish a baseline. Inspect the hydraulic return filter magnet for metallic debris before disposal. Monitor the engine oil level daily via the dipstick and check the hydraulic tank sight gauge. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specs. Regular fluid analysis prevents catastrophic bearing or seal failures by detecting contamination 500 to 800 hours before failure.
Corrective & Common Repairs
Common issues include hydraulic system maintenance and parts availability for older 530 models. Address hydraulic leaks by inspecting hoses for chafing and cylinder rods for scoring. Check the drive pump shaft seal and multi-function valves for wear. Replace the transmission charge filter as needed. Ensure the Bosch Rexroth hydrostatic drive operates smoothly by monitoring transmission oil levels and filter condition. Verify the integrity of the engine/drive pump coupling and drive flange during powertrain repairs.
Overhaul & Rebuild Points
The 2000-hour service requires a deep inspection of the hydraulic oil, necessitating a full tank drain and cleaning. Inspect the swing ring for radial and axial play using dial indicators. Check the turbocharger and charge cooler for shaft play and boot condition. Service the immersed brakes and inspect disc wear. Rebuild hydraulic pumps and motors if pressure tests indicate failure. Calibrate load sensors, strain gauge sensors, and angle detectors to ensure accurate load moment system operation and prevent overloading.
Seasonal & Environment Servicing
For indoor barn work, use the 20-inch tire option to achieve an overall height of 2.0m for clearance under feeders. For outdoor muddy terrain, switch to 24-inch tires for maximum ground clearance and traction. Ensure the clean air vent style exhaust system and combined SCR/DPF are kept clear of debris. Check the Smooth Ride System boom suspension for proper function. Verify the VariSpeed control for separate engine revs and ground speed adjustment when using hydraulically driven attachments like bucket feeders or sweepers.
530 SUPER AG common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/912001 | Element, Fuel Filter, Canister Type | Fuel system service | Check fitment → |
| 02/201696 | Pipe, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/202313 | Pipe, Fuel Lift Pump, To Fuel Filter | Fuel system service | Check fitment → |
| 32/917804 | Element, Air Filter, Main | Air intake service | Check fitment → |
| 32/917805 | Element, Air Filter, Safety | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
530 SUPER AG fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Clogged fuel filters or failing fuel pump | Check and replace fuel filters; inspect fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor or wiring issue | Inspect sensor connector for corrosion; test sensor resistance |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low oil level | Check engine oil level; verify sensor electrical connections |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Open circuit in reductant injector wiring or nozzle | Inspect injector harness and connectors for damage |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus communication failure or poor ground | Check battery voltage and ground straps; inspect CAN wiring |
| 101 | Low transmission clutch pressure detected | Hydraulic system issue or transmission fault | Check hydraulic fluid levels and transmission pressure |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
530 SUPER AG attachments & work tools
Bale Handling
JCB Q-Fit quick-hitch compatible bale spears are available for the 530 series, including single, dual, and triple spear configurations for round and square bales. Worksaver manufactures integrated-frame bale spears with bolt-in forged spears spaced 26 to 34 inches apart, rated for loads up to 4,000 lbs (1,814 kg). These attachments utilize the JCB Q-Fit mounting system standard on the 530-60 Agri Super.
General Purpose Shovels
JCB offers a range of general purpose shovels designed for Loadall telehandlers, compatible with the 530 series mounting interface. These buckets are engineered for material handling tasks and utilize the standard quick-hitch system for rapid attachment changes.
Forks and Pallet Handling
Pallet forks are compatible with the JCB Q-Fit self-levelling carriage, which features lever-operated pin locking for secure attachment. The carriage accepts standard fork widths and is designed to maintain load stability during transport and lifting operations.
Agricultural Specialized
Hydraulically driven attachments such as bucket feeders and sweepers are supported by the machine's VariSpeed control, which separates engine revs from ground speed. The 530-60 Agri Super includes a high-flow auxiliary hydraulic system to power demanding agricultural tools and implements.
Quick Hitch and Mounting
The 530-60 Agri Super utilizes the JCB Q-Fit quick-hitch system for attachment compatibility. Third-party manufacturers provide adapter plates and mounting solutions for the 530 series to interface with universal skid-steer style mounts or specific OEM quick-hitch standards.
All 530 SUPER AG assemblies by section
Every catalogued assembly group for the Jcb 530 SUPER AG. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-1-3 Shovel, 1.4cm, 2286 Wide
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-2-1 Shovel, 1.0cu.M., With Bolt On Toe Plate
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 2 |
| 13***1Z | Nut | 16 |
A1-1-2 Shovel, 1.1cu.Yd., 2235mm (7'4") Wide
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-3-1 Shovel, Clam,6 In 1, 2260mm Wide
| 12***23 | Bush | 2 |
| 12***00 | Jaw, Clamshovel | 1 |
| 13***6Z | Bolt | 2 |
A1-1-1 Shovel, 1.0cu.M
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-2-2 Shovel, 1.1cu.Yd.(88"Wide), With Bolt On Toe Plate
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A1-5-1 Tooth Guard
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt, 1/2" X 2.1/4" Long | 2 |
A3-7-1 Installation, Hydraulic Pin Lock, Quickfit Carriage
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***14 | Bolt | 1 |
A3-2-5 Carriage, Sideshift
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, Male 3/8"Bsp, C/W 2x, 22***33 Circlips | 1 |
| 45***00 | Coupling, Female 3/8"Bsp C/W, 2x Circlip 22***43 | 1 |
A3-8-1 Concrete Skip
| 11***00 | Pin, Lynch, With Chain | 1 |
| 54***00 | Skip, Concrete, Assembly | 1 |
| 54***01 | Spring, Shuttle | 2 |
A3-21-2 Fork, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 81***68 | Plate, Rating | 1 |
A3-3-8 Earthdrill, Dm1650, From 08/2007
| 98***93 | Kit, Drillmaster 1650, Auger | 1 |
A3-50-2 Skip, Volume 1.5 Cu.M, 3mm Thick
| 13***1Z | Nut | 2 |
| 33***49 | Bar | 1 |
| 33***52 | Bar | 1 |
A3-1-3 Carriage, Q/Hitch
| 10***77 | Pin, Pivot, 537mm | 1 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***2Z | Nut | 8 |
A3-27-1 Kits
| 16***67 | Kit, Fork Transit, Toe Plates/Wide Fork | 1 |
| 16***68 | Kit, Fork Transit, Std Fork/No Toe Plat | 1 |
| 98***00 | Kit, Sideshift Carriage, Class 2b, Kit, Sideshift Carriage, Class 2b; 525-58 & 67, 505-19 & 22. Fork Frame 54***00 (See A3-2-1), Is Required To Attach This Item To Machine. | 1 |
A3-2-4 Carraiage Fork, Industrial
| 54***00 | Frame, 1500 mm | 1 |
| 54***00 | Fork, Arm 100wx50tx1067l, Class 3b, Fork, Arm 100wx50tx1067l, Class 3b; Not Fitted On Usa Machines. All Forks Are Supplied In Matched Pairs Only And Cannot Be Replaced Individually | 1 |
| 54***02 | Plate, Stile Top | 1 |
A3-36-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 22 |
A3-20-1 Blade, Snow, 7'6"(2.29) Wide
| 54***00 | Blade, Snow | 1 |
A3-22-3 Flat 8 Bale Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-12-4 Multi-Fork, With Top Grab, 2.4m3 With Keverland Tines
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 80mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
A3-15-1 Bucket,Grain,Potatoe, 90 X 105 Cub.Ft, 7'6" & 8'0" Wide
| 54***01 | Plate, Toe | 1 |
| 54***01 | Plate, Toe | 1 |
A3-5-4 Rockinger Hitch
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-70-3 Air-Con Condenser, Kit
| 13***1Z | Setscrew, M6 X 12mm Long | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
A3-2-50 Carriage/Fork Pin, Compatibility Chart
| 33***92 | Carriage, Wa. (Sideshift); San 13913.33***92 Superseded To 33***41, See Salvage Scheme 16***21 | 1 |
| 33***68 | Carriage, W.A. | 1 |
| 33***51 | Carriage, W.A. | 1 |
A3-70-2 Air-Con Compressor, Kit
| 01***01 | Belt, Drive | 1 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***0Z | Bolt, M16 X 40mm | 1 |
A3-7-2 Hydraulic Pin Lock, 2nd Aux
| 14***11 | Seal, Bonded | 5 |
| 14***4Z | Washer, Star | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 3 |
A3-14-2 Bucket Grain/Potato, 2290mm Wide
| 98***37 | Shovel, Grain Potato | 1 |
| 98***82 | Toe Plate 7'6" | 1 |
A3-5-3 Clevis Hitch
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-3-11 Earth Drill Jcb 1200, Components
| 98***90 | Kit, Power Head | 1 |
| 98***74 | Sprocket | 1 |
| 98***75 | Chain, Drive | 1 |
A3-2-3 Fork Retention Kit
| 54***01 | Link, Fork Retaining | 2 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-9-1 Jib, 4 Metre, Extension
| 14***02 | Screw, Self Tapping | 4 |
| 53***01 | Link, 1.25 Ton | 1 |
| 54***00 | Jib, 4 Metre Extension, Assembly | 1 |
A3-12-2 Fork,Manure/Silage, C/W Top Grab, 1.9m3
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 80mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
A3-40-1 Silashear
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-70-7 Air-Con Conditioning, Kit
| 01***01 | Belt, Drive | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
A3-19-1 Blade, Scraper, 7'6"(2.29m) Wide
| 54***01 | Plate, Toe | 1 |
| 54***00 | Blade, Scraper, 7'-6"(2.29m) Wide | 1 |
A3-28-1 Conversion Bracket, (Weld On)
| 98***42 | Bracket, Conversion | 1 |
A3-2-2 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-12-3 Muck Fork, With Top Grab
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 80mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
A3-1-8 Carriage Quickhitch
| 13***6Z | Bolt | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***4Z | Nut, Philidas Thin | 2 |
A3-3-1 Guard, 'Q'Fit Carriage
| 54***00 | Guard, 'Q'Fit Carriage | 1 |
A3-17-2 Bucket, Slurry/Rehandling
| 98***00 | Shovel, Slurry/Rehandling, 2290mm Wide, 1.0cu.M | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A3-1-2 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter | 2 |
A3-18-1 Blade, Grain Pusher
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 10ft Reach; Nsp Ref A.Little, Resurrected By K Colclough San 03763 | 1 |
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 7ft Reach; Nsp Ref A.Little | 1 |
A3-7-5 Hydraulic Pin Lock, Quickhitch Carriage
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A3-22-2 Wrapped, Bale Clamp
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
| 13***3Z | Nut, M20 | 3 |
A3-1-6 Carriage,Q/Hitch, Industrial, (German)
| 10***77 | Pin, Pivot, 537mm | 1 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***2Z | Nut | 8 |
A3-12-5 Multi-Shovel
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 8 |
A3-42-1 Fork,Manure/Silage, High Capacity
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
| 54***04 | Nut | 9 |
A3-10-1 Crane Hook, Fork Mounted
| 15***00 | Pin | 2 |
| 22***67 | Circlip | 2 |
| 54***00 | Hook, (1 Tonne) Assembly, Fork Mounted | 1 |
A3-50-3 Skip, Volume 1.1 Cu.M, 5mm Thick
| 13***1Z | Nut | 2 |
| 33***49 | Bar | 1 |
| 33***52 | Bar | 1 |
A3-3-10 Earthdrill Jcb 1200, Installation, (Usa)
| 13***3Z | Bolt, M8 X 55 | 1 |
| 14***3Z | Nut | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A3-14-1 Bucket,Grain, Potato, 50 X 70 Cub.Ft 7'6"Wide
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 1.5cu.M | 1 |
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 2.1cu.M | 1 |
A3-25-1 Pole Planter
| 54***00 | Attachment, Pole Planter, Complete; Nsp Ref A.Little | 1 |
| 54***01 | Frame, Front | 1 |
| 54***02 | Frame, Rear | 1 |
A3-45-1 Sweeper Collector, Sprinkler Assy, Fork Mounted
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A3-70-4 Air-Con Chaff Guard, Kit
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***3Z | Nut | 2 |
A3-22-1 Fork, Round Bale, With Push Off
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
| 45***00 | Coupling, Female, 3/8" Bsp; Replaced By 45/91***00, See San04893 | 2 |
A3-4-5 Tow Hitch, Mechanical
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 4 |
A3-21-1 Fork, Round Bale, 2 Bale Capacity
| 54***01 | Fork, Tine | 4 |
| 98***00 | Fork, Round Bale, 1820mm Wide | 1 |
A3-7-4 Hydraulic Pin Lock, 1st Aux
| 14***11 | Seal, Bonded | 4 |
| 14***4Z | Washer, Star | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 3 |
A3-50-1 Skip, Volume 1.1cu.M, 3mm Thick
| 13***1Z | Nut | 2 |
| 33***49 | Bar | 1 |
| 33***52 | Bar | 1 |
A3-2-1 Carriage, Fork,Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-38-1 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A3-70-1 Air-Con Base Kit
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 7 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***3Z | Bolt, M10 X 16 | 1 |
A3-70-6 Air-Con,Remote Oil, Transmission Filter, 530/540
| 13***0Z | Bolt, M10 X 100 | 2 |
| 13***7Z | Bolt | 1 |
| 13***8Z | Bolt, M12 X 80mm | 1 |
A3-11-1 Fork, Manure,Silage, 2.29m Wide X 1.9cu.M
| 54***01 | Frame | 1 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-17-1 Bucket, Slurry Rehandling, 7'6"Wide X 50cu/Ft
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Slurry/Rehandling, 2290mm Wide, 1.5cu.M | 1 |
A3-7-3 Hydraulic Pin Lock, 'Plug In' Type
| 14***11 | Seal, Bonded | 3 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
A3-39-1 Sweeper Collector, Mounting Frame
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A3-26-1 Fork Kit,Italy
| 54***38 | Handle, Locking (Metric) | 2 |
| 54***26 | Fork, 125w X 40t X 1200l | 1 |
| 81***88 | Pin, Fork Pivot, 50.7mm, 1327mm Long | 1 |
A3-1-1 Carriage Q/Fit
| 10***77 | Pin, Pivot, 537mm | 1 |
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-3-9 Earth Drill Jcb 1200, Installation
| 13***3Z | Bolt, M8 X 55 | 1 |
| 14***3Z | Nut | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A3-3-2 Guard,Load, 'Q'Fit Carriage
| 54***00 | Guard, Load; San 23375.Mss To 33***49 & 83***67.28/2/7, P Gamble. L06/223 | 1 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-38-2 Sweeper Collector, Hydraulic Circuit, Fork/Quick Hitch Mounted
| 13***2Z | Bolt, M16x50m | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A3-41-1 Fork,Manure/Silage, With Push Off & Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-5-2 Rockinger Hitch, (French)
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-1-7 Carriage Quickhitch
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***4Z | Nut | 2 |
A3-34-1 Man Platform, Uk & Spain Only
| 15***00 | Pin | 2 |
| 81***84 | Decal, Warning, Platform Securing | 1 |
| 81***21 | Decal, Jcb Platform | 1 |
A3-37-1 Sweeper Collector, Drive/Brush Assy
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-4-1 Tow Hitch, Hydraulic
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 2 |
A3-12-1 Fork,Manure, Silage,With Top Grab, 2.29m Wide X 1.9cu.M
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-16-1 Bucket, Root Crop
| 98***00 | Shovel, Root Crop, 2290mm Wide 105 Cu.M | 1 |
| 98***00 | Bucket, Root Crop, 2290mm Wide 2.1 Cu.M | 1 |
A3-5-1 Rockinger, Adaptor Plate
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***5Z | Washer, 1/2", Medium | 8 |
A3-1-10 Carriage,Quickhitch, German
| 13***6Z | Bolt | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***2Z | Nut | 2 |
A3-50-4 Skip, Volume 1.5 Cu.M, 5mm Thick
| 13***1Z | Nut | 2 |
| 33***49 | Bar | 1 |
| 33***52 | Bar | 1 |
A3-39-2 Sweeper Collector, Mounting Frame, Fork Mounted
| 13***2Z | Bolt, M16x50m | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A3-23-1 Grab,Log, Fixed Forks, 2 To 3ton
| 54***00 | Grab | 1 |
| 54***01 | Frame | 1 |
| 54***03 | Grab, Arm | 2 |
A3-70-5 Air-Con Electrics, Kit
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 1 |
| 70***52 | Decal, Heater Fan Blower | 1 |
| 70***92 | Decal, Air-Con. Switch | 1 |
A3-1-9 Carriage,Quickhitch, German (Black)
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-1-5 Carriage Q/Hitch, Industrial, (German)
| 10***77 | Pin, Pivot, 537mm | 1 |
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-60-1 Heavy Duty Bucket
| 98***28 | Bucket, Heavy Duty | 1 |
| 99***00 | Kit, Tooth C/W Fixings | 1 |
| 99***00 | Toeplate, Bolt On | 1 |
A3-24-1 Grab,Log, Sliding Forks, 2 To 3 Ton
| 54***09 | Hose | 2 |
| 54***10 | Hose | 2 |
| 54***02 | Frame | 1 |
B Bodywork, Cab, Loader End
B1-12-1 Mirror, Tow Hitch
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***5Z | Bolt | 2 |
B1-10-1 Light,Extension, Rear
| 12***02 | Plate, Compression | 1 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 1 |
| 13***3Z | Nut, M16 | 1 |
B1-8-5 Sump Guard
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, M12 | 2 |
B1-3-1 Fenders,Front(Large), Rear(Small)
| 13***8Z | Bolt, M10 X 30 | 32 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-5-10 Retro Fit Scheme, Engine Pod,Covers, Dust Guard & Foam Blocks
| 33***59 | Guard, Dust | 1 |
| 33***69 | Block, Foam | 1 |
| 33***81 | Panel, Noise Absorbent Quil | 1 |
B1-11-1 Steer Sensor, Installation
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
B1-5-5 Engine Pod, Base And Cover, For 120hp Engines
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***0Z | Bolt, M8x40 | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
B1-5-3 Engine Pod, Base And Cover, Revised Cooling
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M8x40 | 4 |
| 13***7Z | Bolt, M10x25 | 1 |
B1-6-2 Tank,Hydraulic
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***6Z | Washer, M6 | 8 |
B1-1-10 Axle Feet Mountings
| 14***0Z | Washer, Plain | 8 |
| 16***80 | Plate, Loader Spreader | 2 |
| 16***81 | Axle, Foot 540, Axle, Foot 540; Note 1. Fit Contact Tech Services. Must Fit Axle Feet Each Side | 2 |
B1-8-9 Chaff Guard, Radiator
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-7-1 Tank,Diesel Fuel, & Mounting Step
| 12***86 | Catch, Vandal Cover | 1 |
| 13***3Z | Screw, M6x16 | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B1-8-1 Chaff Guard, Radiator
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
B1-8-8 Underbody Protection, Fuel Tank & Sump, Revised Cooling
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***9Z | Bolt, M12x90mm | 4 |
B1-9-1 Counterweight, Underslung
| 13***5Z | Bolt | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 2 |
B1-8-13 Belly Plate, 5 Speed
| 13***5Z | Setscrew, M10 X 20mm | 16 |
| 13***2Z | Bolt, Setscrew M10x50 | 8 |
| 14***1Z | Washer, 2 Ba | 8 |
B1-8-6 Guard, Sump & Radiator, Service Use Only
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, M12 | 2 |
B1-1-1 Chassis
| 13***3Z | Screw, M8 X 16 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 16***51 | Chassis, W.A. | 1 |
B1-5-1 Engine Pod, Base And Cover
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M8x40 | 4 |
| 13***8Z | Bolt, M10 X 30 | 6 |
B1-1-3 Chassis,
| 13***3Z | Screw, M8 X 16 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 16***52 | Chassis, W.A. | 1 |
B1-5-4 Engine Pod, Base And Cover, Revised Cooling With Soundproofing
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***0Z | Bolt, M8x40 | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
B1-4-5 Bulkhead Plates
| 13***9Z | Setscrew, M8x35 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B1-4-2 Bodywork Rear, Hydraulic Tow Hitch
| 12***33 | Catch, Door Retaining | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
B1-6-3 Tank,Hydraulic
| 12***53 | Gauge, Sight | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-13-1 Soundproofing, Engine Cover/Bonnet
| 33***07 | Panel, Bonnet Front, Noise Board | 1 |
| 33***08 | Panel, Bonnet Side, Noise Board | 1 |
| 33***09 | Panel, Bonnet Top Rear, Noise Board | 1 |
B1-8-2 Chaff Guard, Under Pod Guard, Installation
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 13 |
B1-3-5 Mirror Arm
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Bolt, Paint Clearing | 2 |
B1-4-1 Bodywork, Rear
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
B1-8-7 Underbody Protection, Fuel Tank & Sump
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***9Z | Bolt, M12x90mm | 4 |
B1-8-12 Belly Plate, 4 Speed
| 13***5Z | Setscrew, M10 X 20mm | 16 |
| 13***2Z | Bolt, Setscrew M10x50 | 8 |
| 14***1Z | Washer, 2 Ba | 8 |
B1-6-4 Tank,Hydraulic
| 12***53 | Gauge, Sight | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-6-1 Tank, Hydraulic
| 13***7Z | Screw, M6 X 25mm Long | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***6Z | Washer, M6 | 8 |
B1-2-1 Mainframe Covers, Lift Ram & Valve Blk
| 13***5Z | Bolt, M5 X 20mm Long | 5 |
| 14***1Z | Washer, 2 Ba | 5 |
| 33***58 | Cover, Valve Block | 1 |
B1-5-2 Engine Pod, Base And Cover, High Ambient
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M8x40 | 4 |
| 13***8Z | Bolt, M10 X 30 | 6 |
B1-13-2 Noise Quilts, Engine Pod & Chassis
| 33***95 | Panel, Noise Quilt, Under Engine | 1 |
| 33***96 | Panel, Noise Quilt, Engine Pod Side | 1 |
| 33***97 | Panel, Noise Quilt, Engine Pod Ffront | 1 |
B2-9-13 Seat, Air Suspension, Delux Cloth (Option)
| 40***03 | Kit, Backrest Foam | 1 |
| 40***05 | Kit, Seat Squab Foam | 1 |
| 40***01 | Frame, L.H., Assembly | 1 |
B2-9-3 Seat
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-7-1 Seat Belt
| 13***2Z | Nut | 2 |
| 40***00 | Belt, Safety, Seat | 1 |
B2-5-1 Light Bracket, Chassis Mounted
| 12***15 | Cap | 2 |
| 13***9Z | Setscrew, M8x35 | 4 |
| 13***9Z | Bolt, Paint Clearing | 2 |
B2-11-1 Handbook Case, Installation, Canopy Build
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 4 |
| 15***01 | Holder, Handbook | 1 |
B2-7-2 Seat Belt, Retractable
| 40***00 | Kit-Seat Belt, With Inertia Reel, 42" Long; Buckle Strap Length 190mm. There Are No Servicable Parts For This Item, Kit-Seat Belt, With Inertia Reel, 42" Long | 1 |
B2-2-10 Latch, Door Kit
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 21***00 | Kit-Latch, Door Retainer | 2 |
| 82***16 | Spacer, Door Catch | 2 |
B2-9-9 Seat, Suspension, Deluxe 411, With 3" Seat Belt
| 13***5Z | Bolt, High Tensile | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-1-30 Inclinometer, Lev-O-Gauge
| 70***00 | Gauge, Inclinometer/Level | 1 |
B2-10-2 Luggage Nets
| 14***02 | Screw | 8 |
| 16***10 | Cover, Luggage Net, Rear Roof | 1 |
| 16***11 | Cover, Luggage Net, Rear Store | 1 |
B2-2-2 Door & Components
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 2 |
| 12***00 | Lock, Door, Left Hand | 1 |
B2-3-2 Panel Instrument, Covers & Brackets, Canopy
| 12***03 | Lock, Switch | 1 |
| 12***31 | Vent, Air Register | 2 |
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
B2-9-2 Suspension Unit, Seat
| 19***01 | Unit, Suspension | 1 |
| 19***02 | Kit-Weight Adjuster | 1 |
| 19***03 | Kit-Height Adjuster | 1 |
B2-3-1 Panel Instrument, Covers & Brackets, Cab
| 12***03 | Lock, Switch | 1 |
| 12***31 | Vent, Air Register | 2 |
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
B2-11-2 Fuse Cover, Canopy Build
| 16***25 | Cover, Fuse/Relay, Cover, Fuse/Relay; Note 1. See Ti 5/202. Fit/Fun M/C M774300 | 1 |
| 41***00 | Sealant | 1 |
B2-9-6 Seat,Suspension, Heated
| 40***14 | Kit, Knob/Weight Adjuster | 1 |
| 40***00 | Seat, Electric Heated | 1 |
| 40***56 | Adjuster, Seat | 1 |
B2-1-8 Canopy, (Revised Styling)
| 12***40 | Plug, Blanking, 30mm | 8 |
| 16***10 | Canopy, Ga Abi; San 20913.Superseded To 16***89.P Gamble, L03/239.01/11***04 | 1 |
| 16***60 | Frame, Cab Painted & Sealed; San 22297.S/S To 16***38.P Gamble, M Forrester Request. | 1 |
B2-0-99 Odds Page
| 30***59 | Filter, Paper | 1 |
B2-1-6 Canopy, Non Convertible
| 16***14 | Canopy, Non Convertible; San 14469.S/Sd To 16***33. See Pi L03/106, P Gamble 02/09/03, Note 1. When Replacing Cab Use Seats From B2-9-11/12, Canopy, Non Convertible; San 14469.S/Sd To 16***33. See Pi L03/106, P Gamble 02/09/03, Note 1. Use Replacement Seats On B2-9-11/12 | 1 |
| 16***33 | Canopy, Non Convertible Abi | 1 |
B2-9-11 Seat,Suspension, (For Cab Replacement)
| 40***14 | Kit, Knob/Weight Adjuster | 1 |
| 40***00 | Kit, Headrest | 1 |
| 40***02 | Kit-Cover, Backrest, Vinyl | 1 |
B2-9-4 Seat, Suspension Xh2/T1, Fabric Trim
| 19***03 | Kit-Height Adjuster | 1 |
| 19***04 | Kit-Damper Assembly | 1 |
| 19***05 | Stop, Bump | 1 |
B2-4-1 Guards Windscreen
| 13***8Z | Screw, M8x30 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B2-9-12 Seat,Suspension, Heated, (For Cab Replacement)
| 40***14 | Kit, Knob/Weight Adjuster | 1 |
| 40***56 | Adjuster, Seat | 1 |
| 40***86 | Seat, Kab 411 Heated | 1 |
B2-1-4 Cab
| 16***31 | Cab, Painted & Sealed, With Doors; San 14469.S/Sd To 16***36.See Pi L03/16, P Gamble 02/09/03, Note. For Replacement Cabsuse Seats On B2-9-11/12, Cab, Painted & Sealed, With Doors; San 14469.S/Sd To 16***36.See Pi L03/16, P Gamble 02/09/03, Note 1. For Replacement Cabs Use Seats On B2-9-11/12 | 1 |
| 16***36 | Cab, Abi; San 22133.Mss To 16***34,Doors,Hinges Etc., P Gamble 03/02***06. | 1 |
| 16***98 | Rail, Grab Upper | 1 |
B2-3-5 Cab Mouldings, Deluxe Trim
| 16***46 | Moulding, Cab Rear Storage | 1 |
| 16***47 | Moulding, Cab Rear Quater | 1 |
| 16***48 | Moulding, Document/Fuse Cover | 1 |
B2-0-2 Cab, Service G.A.
| 16***18 | Cab, G.A. Clear | 1 |
| 16***19 | Cab, G.A. Tinted | 1 |
B2-10-5 Sun Visor
| 14***03 | Screw | 2 |
| 25***01 | Blind, Sun Visor | 1 |
B2-1-1 Cab Glazing, Clear & Green Tint
| 16***72 | Stay, Window, C/W Release Pin | 1 |
| 82***00 | Glass, Upper Door, Clear | 1 |
| 82***01 | Glass, Lower Door; Superseded To 82***75. San 13062. Same Dims, But Slightly Different Lettering. | 1 |
B2-9-5 Seat,Suspension
| 40***14 | Kit, Knob/Weight Adjuster | 1 |
| 40***00 | Kit, Headrest | 1 |
| 40***02 | Kit-Cover, Backrest, Vinyl | 1 |
B2-9-1 Seat,Fabric
| 16***57 | Bracket, Seat Mntg | 2 |
| 40***03 | Kit-Backrest Foam | 1 |
| 40***00 | Seat, 'T6' Fabric; Nb 2 Numbers One Is Packaged And One Is Kit., A Kavanagh Kab Seating See San 20479. | 1 |
B2-2-1 Door & Components
| 12***05 | Bolt, Closing | 1 |
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
| 12***79 | Bush, Hinge | 4 |
B2-10-1 Sunblind, Roof
| 16***19 | Blind, Sun | 1 |
| 82***77 | Nut, Vibration Proof | 2 |
B2-1-5 Cab Frame,Mounting
| 12***02 | Plate, Compression | 4 |
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
| 13***7Z | Bolt | 2 |
B2-1-3 Canopy
| 16***30 | Canopy; San 14469. S/Sd To 16***35. See Pi L03/106, P Gamble 02/09/03, Note 1. Use Replacement Seats B2-9-11/12, Canopy; San 14469. S/Sd To 16***35. See Pi L03/106, P Gamble 02/09/03, Note 1. With Replacement Cabs Use Seats On B2-9-11/12 | 1 |
| 16***35 | Canopy, Abi; San 22133.Ss To 16***34.Wa Assembly.P Gamble, 03/02***06 | 1 |
| 16***98 | Rail, Grab Upper | 1 |
B2-7-3 Seat Belt, Static, Air Suspension Seat
| 40***74 | Belt, Safety, Seat; San 21308.40/91***74 Unpacked.40/20***00 Is, Packed.P Gamble/D Bickerton.A Kavanagh (Kab) | 1 |
B2-6-1 Cab Mirror External
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3Z | Screw, M6x16 | 1 |
| 14***6Z | Washer, Spring | 1 |
B2-9-7 Seat,Suspension Pvc, Canopy Build
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 16***68 | Seat, Plinth | 2 |
B3-6-2 Boom,Pivot Pin &, Bush Location
| 10***77 | Pin, Pivot, 537mm | 1 |
| 13***2Z | Bolt, M12 X 50mm | 3 |
| 13***4Z | Bolt, M12 X 60mm | 1 |
B3-3-1 Indicator, Boom Angle
| 13***1Z | Bolt | 1 |
| 14***96 | Spacer | 1 |
| 33***28 | Boom, Angle Indicator | 1 |
B3-7-1 Pads, Boom Wear
| 13***2Z | Bolt | 2 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 16 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 4 |
B3-9-1 Boom,Lever & Link
| 16***23 | Lever, Crowd | 1 |
| 16***30 | Link, Tipping | 1 |
| 80***26 | Bearing, Liner, 50mm Pivot Bore | 2 |
B3-10-1 Guard,Trash, Inner Boom,Front
| 13***8Z | Bolt, M12 X 30 | 2 |
| 14***9Z | Washer | 1 |
| 16***62 | Guard, Trash | 1 |
B3-6-1 Boom,Pivot Pin &, Bush Location
| 10***77 | Pin, Pivot, 537mm | 1 |
| 13***4Z | Bolt, M12 X 60mm | 1 |
| 13***9Z | Bolt, M12x90mm | 1 |
B3-12-2 Chain Carrier, 2nd Auxiliary
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***9Z | Setscrew, M8x35 | 4 |
| 13***3Z | Nut | 4 |
B3-1-2 Booms, Inner,Outer
| 15***55 | Plate, Qr Coupling Mounts, Boom Nose | 1 |
| 16***23 | Lever, Crowd | 1 |
| 16***30 | Link, Tipping | 1 |
B3-1-1 Booms, Inner,Outer
| 15***55 | Plate, Qr Coupling Mounts, Boom Nose | 1 |
| 16***23 | Lever, Crowd | 1 |
| 16***30 | Link, Tipping | 1 |
B3-12-1 Chain Carrier, 2nd Auxiliary
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***9Z | Setscrew, M8x35 | 4 |
| 13***3Z | Nut | 4 |
B3-7-2 Pads, Boom Wear
| 13***2Z | Bolt | 2 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 16 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 6 |
B5-4-1 Fire Extinguisher
| 14***03 | Screw | 2 |
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
| 99***00 | Extinguisher, Fire, 2kg Abc Powder | 1 |
B5-1-1 Direct Glazing, Replacment Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-6-1 Toolkit, Agricultural
| 91***00 | Gauge, Tyre Pressure | 1 |
| 91***00 | Bar, Telescopic Tommy | 1 |
B5-5-3 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-3-1 Paint
| 42***01 | Thinners, 5 Litres | 0 |
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
B5-7-2 Safety Strut
| 12***00 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 16***23 | Bolt, Support Clamp W.A. | 1 |
B5-7-1 Safety Strut
| 12***00 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 16***23 | Bolt, Support Clamp W.A. | 1 |
B5-5-5 Flip Charts, North America
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-6-5 Grommits
| 82***10 | Grommet | 1 |
| 82***62 | Grommet, 70mm | 1 |
| 82***89 | Grommet | 1 |
B5-2-5 Decals, 540
| 81***73 | Label, Caution | 3 |
| 81***87 | Decal, Tie Down (Chain) | 1 |
| 81***25 | Label, Power Cable Warning, France | 1 |
B5-5-1 Flip Chart Mntg
| 16***72 | Plate, Flip Chart Mount | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 2 |
B5-6-6 Grommits, Sway
| 82***70 | Grommet | 1 |
| 82***62 | Grommet, 70mm | 1 |
| 82***93 | Grommet | 1 |
B5-5-4 Flip Charts, North America
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-10-1 Boom Restraint, Traffic
| 15***83 | Boom, Transport Restraint | 1 |
B5-2-1 Decals, 530
| 81***73 | Label, Caution | 3 |
| 81***87 | Decal, Tie Down (Chain) | 1 |
| 81***25 | Label, Power Cable Warning, France | 1 |
B5-5-2 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B6-5-2 Flip Charts,German, 540
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B6-2-2 Decals, German, 540
| 81***90 | Decal, Jcb, Insignia 375 X 300mm | 1 |
| 81***61 | Decal, Jcb Insignia (Black), 204mm X 250mm | 1 |
| 81***13 | Decal, '70' | 2 |
B6-2-1 Decals, German, 530
| 81***61 | Decal, Jcb Insignia (Black), 204mm X 250mm | 2 |
| 81***92 | Decal, '530' | 2 |
| 81***13 | Decal, '70' | 2 |
B6-5-1 Flip Charts,German, 530
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B6-1-1 Homologation Parts, German
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 8 |
| 13***1Z | Bolt, M10 X 110 | 2 |
C Electrics-Machine, Cab & Engine
C1-1-1 Mainframe, Electrical Layout
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 20 |
| 21***03 | Plug, 3 Way Male Blanking, Connector | 1 |
| 26***01 | Clip, Connector | 1 |
C1-17-1 Control Levers, Black Joystick
| 70***84 | Insert | 1 |
| 70***00 | Switch, Rocker, Switch, Rocker; Note 1. To Improve Installation Of Stab Light | 1 |
| 70***00 | Lever, Joystick 1 Auxiliary; San 12482. Superseded To 70***58., Pi L00/201 | 1 |
C1-10-1 Light,Rear, Combination, Twin Reverse
| 70***00 | Light, L.H. Rear With Rev | 1 |
| 70***01 | Lens | 1 |
| 70***00 | Light, R.H. Rear With Rev | 1 |
C1-12-1 Electrics,Trailer
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
C1-9-1 Light, Front
| 13***7Z | Capscrew, M8x25mm | 12 |
| 14***7Z | Washer, Spring | 8 |
| 70***00 | Light, Head/Indicator R/H, Rh Dip; San2584.Cwe By Mss To 70***56 & 33***99, Ref A Weir/M Orme. P Gamble 21/04***08, Light, Head/Indicator R/H, Rh Dip; San2584.Cwe By Mss To 70***56 & 33***99, Ref A Weir/M Orme. P Gamble 21/04***08, Row See Note 1. Fit/Func M/C 77***16 | 1 |
C1-5-1 Indicator, Safe Load
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***0Z | Screw, M10 X 40, High Tensile | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-15-1 Alarm,Reverse
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-20-1 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
| 71***00 | Plug, Male, Junior Timer | 0 |
C1-2-2 Cab Harness, Electrical Layout
| 70***00 | Headlight, Lh Dip 12 Volt Clear | 1 |
| 71***00 | Harness, Front Worklight-Long | 1 |
| 72***79 | Harness, Panel | 1 |
C1-2-5 Canopy Harness, Electrical Harness
| 16***26 | Bracket, Cannon Mounting | 1 |
| 70***00 | Headlight, Lh Dip 12 Volt Clear | 1 |
| 71***00 | Harness, Front Worklight-Long | 1 |
C1-14-5 Light,Number Plate
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C1-1-2 Mainframe, Electrical Layout
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 20 |
| 26***01 | Clip, Connector | 1 |
| 70***00 | Switch, Proximity; Replaced By 70***75, See San 10336 | 1 |
C1-11-1 Electronic, Control Unit, Powershift-5 Speed
| 13***6Z | Bolt, M6x70 | 2 |
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
C1-5-2 Indicator,Safe Load
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***0Z | Screw, M10 X 40, High Tensile | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-6-1 Fusible Link Box, Assy
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***40 | Fuse, 40 Amp | 2 |
| 71***50 | Fuse, 50 Amp | 1 |
C1-5-5 Indicator, Safe Load, Motion Cutout (France)
| 33***96 | Moulding, Motion Control Lmi | 1 |
| 33***11 | Bracket, Motion Control Lmi | 1 |
C1-16-1 Horn,Single Tone, Front
| 12***90 | Bracket, Support, Left Hand | 1 |
| 13***5Z | Bolt | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
C1-21-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-21-2 Harness Connectors, Repair Ip67 Standard
| 72***03 | Pin, Female, 0.5-1.5mm, Signal | 0 |
| 72***04 | Pin, Female, 1.5-2.0mm, Signal | 0 |
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
C1-18-1 Light,Beacon,Amber, Hazard Warning
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***00 | Beacon, 12v, (155mm Tall) | 1 |
| 82***14 | Washer, Rubber | 1 |
C1-4-1 Isolator,Battery
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 4 |
C1-8-1 Light, Reflector
| 14***02 | Screw, No 8x1/2" | 7 |
| 70***00 | Reflector, Amber | 5 |
| 70***00 | Reflector, Red | 2 |
C1-7-1 Inclinometer, Lev-O-Gauge
| 70***00 | Gauge, Inclinometer/Level | 1 |
C1-17-3 Control Levers
| 70***60 | Lever, Joystick Agri, 1 Auxiliary; S/Sd To 70***24.San 14745.Pi L03/129, P Gamble | 1 |
C1-19-1 Security System
| 16***63 | Box, Tracker | 1 |
| 71***00 | Unit, Tracker Complete | 1 |
| 82***95 | Grommet | 1 |
C1-3-1 Battery & Components
| 10***00 | Clamp | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***1Z | Nut | 2 |
C1-2-1 Cab Harness, Electrical Layout
| 16***26 | Bracket, Cannon Mounting | 1 |
| 70***00 | Headlight, Lh Dip 12 Volt Clear | 1 |
| 71***00 | Harness, Front Worklight-Long | 1 |
C1-10-3 Light,Rear, Combination Lh Dip, Reverse & Fog
| 70***00 | Light, Rh Rear With Fog | 1 |
| 70***01 | Lens | 1 |
| 70***00 | Light, L.H. Rear With Rev | 1 |
C1-13-1 Switch, Column, Powershift
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
C1-10-2 Light,Rear, Combination,Rh Dip, Reverse & Fog
| 70***00 | Light, R.H. Rear With Rev | 1 |
| 70***01 | Lens | 1 |
| 70***00 | Light, L.H. Rear With Fog | 1 |
C1-14-1 Light,Number Plate, Rockinger Tow Hitch
| 26***01 | Clip, Connector | 2 |
| 70***00 | Light, Number Plate | 2 |
| 82***77 | Nut, Vibration Proof | 2 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-3-1 Alternator
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
C2-1-1 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-4-1 Alternator Mountings
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C3-20-51 Salvage Scheme, Cooling Package, Mk2 To Mk3 Cooling
| 13***0Z | Bolt, M10 X 40 | 5 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 5 |
| 16***32 | G.A., Rev Fan Electrics, (Std Build Machine) | 1 |
C3-20-4 Condenser, Installation, Revised Cooling
| 13***2Z | Screw, M6 X 50 | 6 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***6Z | Washer, M6 | 2 |
C3-6-1 Cab Fixings, Switches, Fuses &, Grommets Etc
| 13***9Z | Bolt, M8 X 90mm Long | 3 |
| 13***2Z | Nut | 2 |
| 14***02 | Screw, No 8x1/2" | 12 |
C3-4-1 Switches,Electrical
| 12***03 | Lock, Switch | 1 |
| 14***02 | Screw | 2 |
| 70***04 | Insert, 2/4wd Disconnect | 1 |
C3-9-2 Rear Worklight
| 70***00 | Rear Worklight | 1 |
| 70***31 | Decal, Front Working Lights | 1 |
| 70***00 | Switch | 1 |
C3-8-1 Light,Interi0r,Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-20-50 Salvage Scheme
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
C3-12-2 Instrument Cluster, 21 Kph, German
| 16***00 | Gearbox, Ga + Inst Cluster | 1 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C3-4-10 Switches Electrical, Smooth Ride System
| 70***00 | Holder, Warning Light | 1 |
| 70***00 | Switch | 1 |
| 70***10 | Decal, Smooth Ride (Insert), Horizontal | 1 |
C3-1-1 Motor,Wiper, Windscreen
| 13***5Z | Screw, M6 X 20mm Lg | 2 |
| 14***6Z | Washer, M6 | 2 |
| 16***88 | G.A. | 1 |
C3-13-1 Speedo, Installation
| 33***39 | Speedo/Sli Moulding | 1 |
| 33***41 | Speedo Mounting Ring | 1 |
| 70***00 | Gauge, Speedometer, 60kph | 1 |
C3-7-1 Relays & Fuses
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
| 71***04 | Fuse, 7.5 Amp | 1 |
C3-2-2 Motor, Wiper, Roof Window,Canopy
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***03 | Cover | 1 |
C3-5-1 Heater,Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt, M10 X 16 | 1 |
C3-9-5 Front Working Lights
| 15***02 | Spacer | 1 |
| 16***94 | G.A. | 1 |
| 70***00 | Light, Auxilliary . | 1 |
C3-20-5 Air Conditioning, Hose Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 14***26 | Receiver, Drier; San 21498.Ref T Reece-Evans.Says Same As The, 14***26.Reinstated San 22427.Tim Wrong | 1 |
| 30***00 | Condenser | 1 |
C3-5-5 Air Conditioning, Assembly
| 16***75 | G.A. | 1 |
| 16***32 | Knob, Control | 1 |
| 26***78 | Valve, Expansion | 1 |
C3-1-2 Motor, Wiper, Windscreen, Canopy
| 13***5Z | Bolt | 2 |
| 14***1Z | Washer | 2 |
| 14***6Z | Washer, Spring | 2 |
C3-20-52 Abi Salvage, Cooling Package, Mk2 To Mk3 Cooling Pack
| 13***5Z | Bolt | 4 |
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
C3-8-4 Clock Digital
| 12***90 | Clock, Digital | 1 |
C3-20-7 Condensor, Installation, Revised Cooling
| 13***2Z | Screw, M6 X 50 | 5 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***6Z | Washer, M6 | 2 |
C3-20-2 Condenser, Installation
| 13***1Z | Setscrew, M6 X 12mm Long | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
C3-17-1 Heater Assembly
| 13***3Z | Nut, Lock, M10 | 2 |
| 16***78 | Heater, Assembly Unit | 1 |
| 22***05 | Clip, Jubilee | 2 |
C3-4-5 Switches Electrical, Controls Console
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 1 |
| 70***02 | Lens, Insert | 1 |
C3-12-3 Instrument Cluster, 29 Kph, France
| 16***02 | Gearbox, Ga + Inst Cluster | 1 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C3-3-1 Motor, Wiper, Rear Window
| 14***02 | Screw | 2 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
| 25***03 | Jet, Screen Washer | 1 |
C3-18-1 Fan, Cab Cooling, Optional
| 14***03 | Screw, Self Tapping | 4 |
| 71***06 | Fuse, 15 Amp, Fuse, 15 Amp; C3 - Thermostart. On Fastrac 185ti From M636--- - Provides Ether Start Circuit Protection. | 1 |
| 71***00 | Fan, 12 Volt; Replaced By 71***40, See San 10523 | 1 |
C3-20-54 Reverse Fan, Electrics G.A.
| 16***32 | G.A., Rev Fan Electrics, (Std Build Machine) | 1 |
| 70***52 | Decal, Heater Fan Blower | 1 |
| 70***00 | Switch, Blank | 1 |
C3-40-1 Spool Switch, Smooth Ride System
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
| 14***7Z | Washer | 4 |
C3-12-1 Instrument Cluster, 33 Kph
| 70***02 | Gauge, Tachometer | 1 |
| 70***00 | Cluster, Instrument, 33 K.P.H. | 1 |
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
C3-9-1 Radio,Optional
| 14***02 | Screw, No 8x1/2" | 2 |
| 16***45 | Housing, Cab Radio | 1 |
| 16***30 | Housing, Radio | 1 |
C3-20-3 Condenser, Installation
| 13***2Z | Screw, M6 X 50 | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
C3-3-2 Motor, Wiper, Rear Window,Canopy
| 13***5Z | Screw, M6 X 20mm Lg | 2 |
| 14***6Z | Washer, M6 | 2 |
| 14***02 | Screw | 2 |
C3-2-1 Motor,Wiper, Roof Window
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***03 | Cover | 1 |
C3-20-1 Air Conditioning, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 16***35 | Mounting, Chaff Guard | 1 |
| 16***90 | Bracket, Hose Guide | 1 |
C3-20-6 Air Conditioning, Hose Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 13***0Z | Screw | 1 |
| 13***3Z | Bolt, M6x55 | 1 |
C3-10-1 Switch,Column, Powershift
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
C3-20-53 Salvage Cooling Hyd, Mk2 To Mk3, Cooling Pack
| 13***5Z | Bolt | 2 |
| 13***1Z | Bolt | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
D Controls-Machine, Engine & Steering
D1-5-12 Blanking Kit, Manual Aux, (Req'D Elec.Aux)
| 13***1Z | Nut | 1 |
| 14***6Z | Washer, M6 | 4 |
| 16***02 | Plate, Cover Stab/Aperture | 1 |
D1-2-2 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 13***2Z | Nut | 1 |
D1-6-1 No Tilt Lock, Agricultural
| 12***81 | Bar, Lever Lock | 1 |
| 81***63 | Decal, Lever Lock, Agriculture | 1 |
| 82***62 | Clip | 2 |
D1-5-2 Control Levers Agri, Full Locks, Loader Pattern
| 11***16 | Joint, Universal | 1 |
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 6 |
D1-2-1 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 13***2Z | Nut | 2 |
D1-5-1 Control Levers Agri, No Tilt Locks, Loader Pattern
| 11***16 | Joint, Universal | 1 |
| 13***4Z | Bolt | 2 |
| 13***2Z | Nut, M8 | 6 |
D1-6-2 Full Lever Lock, Agriculture, (Loader Pattern)
| 12***81 | Bar, Lever Lock | 1 |
| 81***63 | Decal, Lever Lock, Agriculture | 1 |
| 82***62 | Clip | 2 |
D2-1-2 Control, Throttle, (4 Speed)
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 1 |
D2-1-1 Control, Throttle, (5 Speed)
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***2Z | Bolt | 2 |
D3-1-1 Steering, Column
| 12***61 | Plate, Retainer | 1 |
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
E Hydraulics & Air Including, Steering
E1-4-1 Circuit,Steering
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
E1-1-4 Circuit,Neutral
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
E1-5-3 Circuit, Aux 2
| 13***8Z | Screw, M8x30 | 2 |
| 13***2Z | Bolt | 1 |
| 13***8Z | Bolt, M8x80mm Long | 1 |
E1-7-1 Circuit,Tow Hitch, Hydraulic
| 13***9Z | Setscrew, M8x35 | 3 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 1 |
| 13***2Z | Bolt, Hex. | 1 |
E1-14-1 Circuit, Accumulator, Hydraulics
| 13***8Z | Bolt, M8x80mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 16***69 | Filter, Pilot Assembly | 1 |
E1-1-1 Circuit,Neutral
| 13***0Z | Bolt | 6 |
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***5Z | Nut | 1 |
E1-13-1 Circuit, Reversing Fan, Revised Cooling
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Capscrew | 4 |
| 14***11 | Seal, Bonded | 4 |
E1-4-2 Circuit,Steering
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***0Z | Bolt, M8x40 | 1 |
E1-1-3 Circuit,Neutral
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 1 |
E1-15-1 Coolers,Installation, Oil & Hydraulic
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-4-5 Steer Mode Valve, Manual Hydraulics
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***4Z | Bolt | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-1-2 Circuit Neutral
| 13***0Z | Bolt | 6 |
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***5Z | Nut | 1 |
E1-2-1 Circuit,Lift End
| 13***3Z | Screw, M6x16 | 1 |
| 13***3Z | Screw, M8 X 16 | 7 |
| 13***2Z | Bolt | 2 |
E1-8-1 Circuit, Trailer Brakes
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt | 1 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
E1-5-1 Circuit, Aux 1
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***2Z | Bolt | 1 |
E1-11-1 Circuit, Smooth Ride System, Installation
| 13***1Z | Screw, Hex Head, M8 X 12 | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt | 2 |
E1-11-2 Circuit, Smooth Ride System, Installation
| 13***1Z | Screw, Hex Head, M8 X 12 | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt | 2 |
E1-5-2 Circuit, Aux 2
| 13***8Z | Screw, M8x30 | 2 |
| 13***2Z | Bolt | 1 |
| 13***8Z | Bolt, M8x80mm Long | 1 |
E1-7-2 Circuit,Tow Hitch, Mechanical
| 13***9Z | Setscrew, M8x35 | 3 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 1 |
| 13***2Z | Bolt, Hex. | 1 |
E1-2-2 Circuit, Lift End
| 13***3Z | Screw, M6x16 | 1 |
| 13***3Z | Screw, M8 X 16 | 7 |
| 13***0Z | Bolt | 4 |
E2-1-1 Pump, Main Hydraulic
| 20***01 | Valve, Priority Steer | 1 |
| 20***03 | O Ring | 1 |
| 20***00 | Pump, Hydraulic Main, (Triple) | 1 |
E2-2-1 Pump,Main Hydraulic, Fittings & Mntgs
| 13***8Z | Bolt | 4 |
| 14***8Z | Washer, Spring | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
E2-1-3 Pump (Two Stage), Main Hydraulics
| 20***02 | Kit, Seal | 1 |
| 20***03 | O Ring | 1 |
| 20***08 | Pump, Hydraulic(Two Stage), 36cc_16cc | 1 |
E2-5-2 Motor, Fan Drive, Revised Cooling
| 20***32 | Motor, Fan, Hydraulic | 1 |
E2-2-2 Pump,Main Hydraulic, Fittings & Mntgs
| 13***8Z | Bolt | 4 |
| 14***8Z | Washer, Spring | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
E2-5-3 Motor, Fan Drive, Revised Coupling, Bi-Directional
| 20***33 | Motor, Fan, Hydraulic, Bi-Directional | 1 |
| 20***78 | Key, Woodruff, 3.2 X 6.5 X 16dia | 1 |
| 20***79 | Nut, M12 X 1.5 | 1 |
E2-5-1 Motor, Fan Drive
| 20***22 | Motor, Fan Drive | 1 |
E2-1-2 Pump (Three Stage), Main Hydraulics
| 20***03 | O Ring | 1 |
| 20***55 | Pump, Main,Triple, Supp No-7029530001; San21714.Ss To 2/92***91.L03/054.29/09***05, P Gamble | 1 |
| 20***83 | Valve, Priority Steer | 1 |
E2-2-3 Pump (Two Stage), Main Hydraulics, Fittings & Mntgs
| 13***8Z | Bolt | 4 |
| 14***8Z | Washer, Spring | 4 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
E3-1-1 Valve Assy, 4 Spool, Agriculture
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt | 1 |
E3-8-2 Valve, Steering, Standard
| 35***08 | Kit-Seal | 1 |
| 35***02 | Kit, Bearing; San 22117.Made Nla On The Request Of R Bryant, 09/12***05. P Gamble | 1 |
| 35***54 | Kit, Check Valve | 1 |
E3-2-1 Valve Components, Manual
| 25***01 | Cover, Inlet; Note 1. Used On 25/40***00,25/40***00, Cover, Inlet, Cover, Inlet; Inlet See Note 1.4 Spool. Refer To Valve Assembly, Cover, Inlet; Note 1. 25/40***00,40***00,40***00,40***00,40***00,40***00 | 1 |
| 25***02 | Valve, Section | 2 |
| 25***05 | Cover, Outlet | 1 |
E3-2-6 Valve Components, Solenoid, (Smooth Ride System)
| 25***16 | Valve, Section | 1 |
| 25***17 | Valve Section | 1 |
| 25***01 | Cover, Inlet; Note 1. Used On 25/40***00,25/40***00, Cover, Inlet, Cover, Inlet; Inlet See Note 1.4 Spool. Refer To Valve Assembly, Cover, Inlet; Note 1. 25/40***00,40***00,40***00,40***00,40***00,40***00 | 1 |
E3-8-4 Valve, Steering, 2 Stage Pump
| 35***08 | Kit-Seal | 1 |
| 35***02 | Kit, Bearing; San 22117.Made Nla On The Request Of R Bryant, 09/12***05. P Gamble | 1 |
| 35***54 | Kit, Check Valve | 1 |
E3-6-1 Valve, Steering Mode & Mntg
| 12***21 | Block | 1 |
| 13***0Z | Bolt | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 8 |
E3-4-2 Diverter Valve, Chassis Fitted, Smooth Ride System
| 25***35 | Valve, Diverter | 1 |
| 25***01 | Coil, 35mm Long, 12.7mm Dia Hole | 1 |
| 25***03 | Cartridge, Spool, Normally Closed | 1 |
E3-4-1 Diverter Valve, Ram Fitted, Smooth Ride System
| 25***36 | Valve, Diverter | 1 |
| 25***01 | Coil, 35mm Long, 12.7mm Dia Hole | 1 |
| 92***84 | Valve Solenoid, (No Coil) | 1 |
E3-8-1 Valve,Steering, Standard
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***06 | O Ring | 1 |
E3-7-1 Valve,Changeover
| 25***00 | Valve, Auxiliary/Sway Change Over | 1 |
| 25***01 | Coil, 12v | 1 |
E3-10-1 Filter, Hydraulic
| 13***0Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E3-1-4 Valve Assy, 4 Spool Agriculture, (Smooth Ride System)
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt | 1 |
E3-5-1 Valve Conversion, Smooth Ride System
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
| 14***7Z | Washer | 4 |
E3-1-3 Valve Assy, 4 Spool Agriculture, (Smooth Ride System)
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt | 1 |
E3-1-2 Valve Assy, 4 Spool,Agriculture
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***1Z | Bolt, M8 X 45 | 1 |
E3-3-1 Valve Components, Sections
| 25***06 | Kit-End Mechanism | 1 |
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 2 |
E3-8-3 Valve, Steering, 2 Stage Pump
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***06 | O Ring | 1 |
E3-2-5 Valve Components, Solenoid, (Smooth Ride System)
| 25***16 | Valve, Section | 1 |
| 25***17 | Valve Section | 1 |
| 25***01 | Cover, Inlet; Note 1. Used On 25/40***00,25/40***00, Cover, Inlet, Cover, Inlet; Inlet See Note 1.4 Spool. Refer To Valve Assembly, Cover, Inlet; Note 1. 25/40***00,40***00,40***00,40***00,40***00,40***00 | 1 |
E3-2-2 Valve Components, Solenoid
| 25***01 | Cover, Inlet; Note 1. Used On 25/40***00,25/40***00, Cover, Inlet, Cover, Inlet; Inlet See Note 1.4 Spool. Refer To Valve Assembly, Cover, Inlet; Note 1. 25/40***00,40***00,40***00,40***00,40***00,40***00 | 1 |
| 25***02 | Valve, Section | 1 |
| 25***05 | Cover, Outlet | 1 |
E3-30-1 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 32***01 | Element, 25 Micron | 1 |
| 32***02 | Element, 10 Micron | 1 |
E4-1-2 Ram, Lift
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-11-1 Ram, Tow Hitch
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
E4-12-1 Ram, Sideshift Carriage
| 90***76 | Adapter, 90 Deg Elbow | 2 |
| 98***08 | Ring, Retaining | 2 |
| 98***09 | Ring, Retaining | 2 |
E4-15-1 Ram,Log Grab, Manure Silage Fork
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-15-3 Ram,Manure
| 33***48 | Ram; Tighe Ref Sg-10 | 1 |
| 55***41 | Cylinder; San 22983.Cwe To 33***48.P Gamble 30/10/06, Ref Tighe Eng/S Chadwick. | 1 |
| 55***42 | Rod, Piston | 1 |
E4-8-1 Extension Ram
| 14***01 | Washer, Aluminium | 2 |
| 23***08 | O Ring | 1 |
| 23***55 | O Ring | 1 |
E4-3-1 Ram,Displacement, Agricultural
| 12***21 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-20-1 Lift Ram, Smooth Ride System, Installation
| 13***1Z | Screw, Hex Head, M8 X 12 | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt | 2 |
E4-3-2 Ram Displacment, Construction
| 12***21 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-1-4 Ram, Lift, (Smooth Ride System)
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-20-2 Lift Ram, Smooth Ride System, Installation
| 13***1Z | Screw, Hex Head, M8 X 12 | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Bolt | 2 |
E4-15-2 Ram,Manure,Silage, Grab
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-13-1 Ram, Strimech, Bale/Clamp Grab
| 99***03 | Kit-Seal | 1 |
| 99***00 | Ram, Assembly | 1 |
| 99***01 | Cylinder | 1 |
E4-1-3 Ram, Lift, (Smooth Ride System)
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-1-1 Ram, Lift
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-7-1 Ram, Tilt, Agricultural
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
E4-1-20 Ram, Lift
| 24***47 | Seal, Piston, 140mmx119mmx10mm | 1 |
| 24***24 | Ring, Wear, 140mmx135mmx15mm | 2 |
| 25***65 | Valve, Counterbalance, Sun A-204-30j-J03 | 1 |
F Axles, Wheels & Transmission
F1-5-1 Differential, Components
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F1-3-1 Hub & Components
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F1-1-2 Axle, Pad Mntd, Maxtrac, Ratio 15.78
| 13***6Z | Bolt, 11" Long | 0 |
| 13***16 | Bolt, M16x70l | 28 |
| 14***0Z | Washer, Plain | 8 |
F1-1-1 Axle, Pad Mntd, Lsd, Ratio 15.78
| 13***6Z | Bolt, 11" Long | 0 |
| 13***16 | Bolt, M16x70l | 28 |
| 14***0Z | Washer, Plain | 8 |
F1-8-1 Axle Power Trackrod, Installation,3 Piece, Axle 453/22400
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-6-1 Brakes,Axle, (Axle Arm)
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
F1-2-1 Differential Assy, Pad Mntd,Lsd
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-4-2 Crown Wheel/Pinnion, Assy
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***00 | Differential, Assembly | 1 |
| 82***80 | Bolt | 12 |
F1-9-1 Ram,Sway,Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***2Z | Bolt | 2 |
F1-2-2 Differential Assy, Pad Mntd,Maxtrac
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-7-1 Knuckle,Steering,&, Hub Driveshaft,
| 13***09 | Screw | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***03 | Joint, Knuckle Swivel | 1 |
F1-5-2 Differential Assy, Components
| 13***18 | Bolt | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-4-1 Differential & Crown, Wheel Assy
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***00 | Differential, Assembly, Lsd | 1 |
| 82***80 | Bolt | 12 |
F2-2-1 Differential, Assembly
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F2-1-1 Axle Assembly,Rear, Trunnion Mntd,Steer, Drive,Ratio 23.625
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-5-1 Ram,Steering,Rear, Axle Installation,
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-6-1 Shaft,Drive
| 91***01 | Driveshaft | 1 |
| 91***46 | Shaft, Hub | 1 |
| 91***48 | Shaft, Diff Side | 1 |
F2-4-1 Hub & Components
| 10***01 | Nut | 20 |
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F3-3-1 Axle Lock, Oscillation Stop, Installation
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 2 |
| 15***01 | Axle, Lockstop | 2 |
F3-2-3 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, 19.5 Lr24 Michelin; Note 1. Use Lockstop 15***01, Wheel, Assembly, 19.5 Lr24 Michelin | 4 |
| 16***66 | Wheel, & Tyre Assembly.Traction, 17.5lr X 24 | 4 |
F3-2-1 Wheels & Tyres
| 15***01 | Valve | 1 |
| 16***78 | G.A., Axle Lock/Oscill, 19.5 Lr 24 Tyres; Made Mss. San 14748 | 1 |
| 16***56 | Wheel, & Tyre Assembly, 445/70 R24xm27 Mich | 4 |
F3-1-1 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
| 82***41 | Nut | 8 |
F3-2-2 Wheels & Tyres
| 15***01 | Valve | 1 |
| 16***78 | G.A., Axle Lock/Oscill, 19.5 Lr 24 Tyres; Made Mss. San 14748 | 1 |
| 16***56 | Wheel, & Tyre Assembly, 445/70 R24xm27 Mich | 4 |
F3-2-4 Wheels & Tyres
| 15***01 | Valve | 1 |
| 16***67 | Wheel, & Tyre 15.5/80x24, (Thick Rim)Goodyear | 4 |
| 16***68 | Wheel, & Tyre 15.5/80x24, (Thick Rim)Dunlop | 4 |
F5-2-1 Transmission, External Parts, 2/4 Wd, 5 Speed
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***8Z | Bolt, M10x80 | 7 |
| 13***3Z | Screw, M8 X 16 | 2 |
F5-2-3 Mainshaft, Components, 2/4 Wd, P/Shift Transmission
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F5-2-7 Clutch, 5th Gear, 2/4 Wd,5 Speed, Powershift
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 1 |
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 4 |
F5-10-2 Rear Pipework, Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
F5-0-2 Transmissions, Identification
| 45***30 | Transmission, Ga Bevel Package; Superceded By 45***40 + 72***63(X8) | 1 |
| 45***20 | Transmission, Ga Bevel Package, 5 Speed Perm 4wd; Superceded By 45***30 + 72***63(X8) | 1 |
| 45***30 | Transmission, Bevel Package G.A. | 1 |
F5-2-4 Clutch, Reverse, 2/4 Wd, 5 Speed, Powershift
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-10-3 Transmission, Components, Revised Cooling
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 14***08 | Seal, Washer | 2 |
F5-1-2 Transmission, 5 Speed, 4 Wd
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 1 |
| 13***08 | Capscrew | 1 |
| 33***59 | Bracket, Brake Caliper Mount, Hayes Caliper | 1 |
F5-10-1 Transmission, Components
| 14***08 | Seal, Washer | 2 |
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 5 |
F5-2-17 Clutch, 5th Gear, 4 Wd, 5 Speed, Powershiift
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 1 |
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 4 |
F5-1-1 Transmission, 5 Speed, 2/4 Wd
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 1 |
| 13***08 | Capscrew | 1 |
| 22***71 | Circlip | 1 |
F5-2-8 Transmission, Brackets & Lift Eyes
| 13***9Z | Screw, M10x35mm | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 16***37 | Bracket, Cable W.A. | 2 |
F5-2-2 Clutch, Input, 2/4wd, 5 Speed, Powershift
| 22***15 | Circlip | 2 |
| 44***03 | Washer, Thrust; Replaced By 44***08, See San05152 | 1 |
| 44***07 | Plate, Counter | 12 |
F5-2-11 Transmission, External Parts, 4 Wd, 5 Speed
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***8Z | Bolt, M10x80 | 7 |
| 13***3Z | Screw, M8 X 16 | 2 |
F5-8-1 Torque Convertor, Drive Plates &, Drive Couplings
| 04***03 | Bolt | 6 |
| 04***52 | Converter, 12.2" Torque | 1 |
| 04***53 | Kit, Drive Plate | 1 |
F5-2-6 Switch, Solenoid, Perm 2/4wd,5 Speed, P/Shift Transmission
| 13***8Z | Screw, M8x30 | 14 |
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 12 |
F5-2-5 Layshaft Components, 2/4 Wd, 5 Speed, Powershift
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
| 44***07 | Plate, Counter | 6 |
F5-2-15 Layshaft Components, 4 Wd, 5 Speed, Powershift
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
| 44***07 | Plate, Counter | 6 |
F5-2-14 Clutch,Reverse, 4 Wd, 5 Speed, Powershift
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-11-1 Filter, Transmission, (Remote Fitting)
| 13***0Z | Bolt, M10 X 100 | 2 |
| 13***7Z | Bolt | 1 |
| 13***8Z | Bolt, M12 X 80mm | 1 |
F5-6-1 Transmission, Mounting
| 13***8Z | Bolt, M16 X 80 | 2 |
| 13***03 | Nut | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
F5-2-12 Clutch, Input, 4 Wd, 5 Speed, Powershift
| 22***15 | Circlip | 2 |
| 44***03 | Washer, Thrust; Replaced By 44***08, See San05152 | 1 |
| 44***07 | Plate, Counter | 12 |
F5-2-10 Transmission, Clutch Unit, Drop Box
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F5-3-1 Transmission, Bevel, G/Box Components
| 13***3Z | Bolt, M24 X 130 | 1 |
| 13***1Z | Nut, M24 | 1 |
| 14***08 | Seal, Washer | 2 |
F5-9-1 Dipstick, Transmission
| 13***1Z | Bolt, M10 X 10 | 1 |
| 15***00 | Nut, Sealastic | 1 |
| 16***13 | Dipstick | 1 |
F5-2-16 Switch, Solenoid, Perm 4 Wd, 5 Speed, P/Shift Transmission
| 13***8Z | Screw, M8x30 | 14 |
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 12 |
F5-2-13 Mainshaft, Components, 4 Wd, Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 9 |
| 44***12 | Spacer | 1 |
F5-2-9 Pump, Torque Converter, 5 Speed Powershift
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump, Assembly, Transmission | 1 |
| 45***00 | Gear, Engine Driven, 5 Speed | 1 |
F6-2-61 Switch, Solenoid, 2/4 Wd, Farm Special Plus
| 13***8Z | Screw, M8x30 | 14 |
| 13***5Z | Screw, M5 X 20 | 4 |
| 13***8Z | Capscrew, M5 X 30mm | 12 |
F6-0-2 Transmissions, Identification, Farm Special Plus
| 45***30 | Transmission, Bevev Package G.A.; Superceded By 45***50 + 72***63(X8) | 1 |
| 45***30 | Transmission, Bevel G.A.; Superceded By 45***60 + 72***63(X8) | 1 |
| 45***40 | Transmission, Bevel Package G.A.; Superceded By 45***70 + 72***63(X8) | 1 |
F6-2-21 Clutch, Reverse, Powershift, Farm Special Plus
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-3-1 Transmission, Bevel, G/Box, Farm Special Plus
| 13***3Z | Bolt, M24 X 130 | 1 |
| 13***1Z | Nut, M24 | 1 |
| 14***08 | Seal, Washer | 2 |
F6-1-3 Transmission, 4 Speed,4 Wd,S/Ratio, Farm Special Plus
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
| 44***12 | Spacer | 1 |
F6-2-2 Gearbox,Permanent, 4 W/D Ext Components, Farm Special Plus
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***0Z | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
F6-9-1 Dipstick, Transmission, Farm Special Plus
| 13***1Z | Bolt, M10 X 10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 15***00 | Nut, Sealastic | 1 |
F6-2-1 Gearbox,2/4wd Clutch, Ext Components, Farm Special Plus
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***0Z | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
F6-2-81 Transmission, Brackets & Lift Eyes, Farm Special Plus
| 13***9Z | Screw, M10x35mm | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 16***37 | Bracket, Cable W.A. | 2 |
F6-2-31 Mainshaft,Components, 2/4 Wd, Powershift, Farm Special Plus
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-1-2 Transmission, 4 Speed, 4 W/D,Xlr, Farm Special Plus
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
| 44***12 | Spacer | 1 |
F6-2-41 Layshaft,Components, Extra Low Ratio, Farm Special Plus
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-2-32 Mainshaft,Components, 4 Wd, Powershift, Farm Special Plus
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 9 |
| 44***12 | Spacer | 1 |
F6-2-42 Layshift,Components, Standard Ratio, Farm Special Plus
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-2-11 Clutch, Input, Powershift, Farm Special Plus
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-1-1 Transmission, 4 Speed, 2/4 Wd,Xlr, Farm Special Plus
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
| 44***00 | Kit-Shim | 1 |
F6-8-1 Torque Convertor, Plates & Couplings, Farm Special Plus
| 04***00 | Converter, 12.2-5 Torque | 1 |
| 04***03 | Bolt | 6 |
| 04***53 | Kit, Drive Plate | 1 |
F6-10-1 Transmission, Components, Farm Special Plus
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 14***08 | Seal, Washer | 2 |
F6-6-1 Transmission, Mounting, Farm Special Plus
| 13***8Z | Bolt, M16 X 80 | 2 |
| 13***03 | Nut | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
F6-2-62 Switch,Solenoid, 4 W/D, Farm Special Plus
| 13***8Z | Screw, M8x30 | 14 |
| 13***5Z | Screw, M5 X 20 | 4 |
| 13***8Z | Capscrew, M5 X 30mm | 12 |
F6-2-33 Mainshaft,Components, 4 Wd,Std Ratio, Farm Special Plus
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 9 |
| 44***12 | Spacer | 1 |
G Brakes
G1-4-1 Trailer Brakes
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt | 1 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
G1-2-1 Brake, Parking
| 15***86 | Caliper, Parkbrake, Hayes; San 20751.Superseded By 15/92***72.Pi 449/178, P Gamble.07/10***04 | 1 |
| 33***59 | Bracket, Brake Caliper Mount, Hayes Caliper | 1 |
| 33***89 | Bracket, Reaction | 1 |
G1-1-1 Braking System
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***3Z | Nut | 2 |
G1-3-1 Brake Pedal &, Master Cylinder
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***1Z | Bolt | 1 |
| 13***9Z | Bolt, M10 X 35 | 3 |
G1-4-2 Trailer Brakes
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt | 1 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
G1-1-2 Braking System
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***3Z | Nut | 2 |
G1-6-1 Brakes, Axle, (Axle Arm)
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 1 |
G1-5-1 Brake Caliper, Parking
| 15***01 | Kit-Brake Pad; Replaced By 15/92***03 | 1 |
| 15***03 | Kit, Spring | 1 |
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
P Engine 1004-4 Tier 1 Emissions
P1-3-1 Block Assembly, Am Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Am Builds
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-5-1 Fans, Pulleys, & Fan Belt
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
P1-1-1 Engine, Complete, Am Build
| 01***49 | Engine, Complete, 104-4tw, Turbocharged, 121bhp | 1 |
P1-2-1 Engine, Short, Am Builds
| 02***60 | Engine, Short, Turbo | 1 |
P1-6-1 Timing Case, Camshaft & Gears, Am Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-3-2 Block Assembly, Am Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-2-2 Engine, Long, Am Build
| 02***36 | Engine, Short | 1 |
P1-8-1 Engine Mounting, Bolts
| 02***70 | Dowel | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
| 13***1Z | Bolt, M12 X 45mm | 3 |
P1-7-1 Flywheel & Housing
| 02***78 | Gear, Starter Ring | 1 |
| 02***25 | Washer | 6 |
| 02***08 | Flywheel, Assembly | 1 |
P1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Am Builds
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P2-2-1 Rocker Assembly, Push Rods & Tappets, Am Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-4-1 Lifting Plates, Engine, Am Build
| 02***31 | Plate, Lifting | 1 |
| 02***32 | Plate, Lifting | 1 |
| 02***54 | Screw | 1 |
P2-3-1 Rocker Cover, Am Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
P2-1-1 Cylinder Head, Am Build
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P3-4-2 Exhaust System, Turbo, With Spark Arrestor
| 02***03 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
P3-4-1 Exhaust System, Turbo
| 02***03 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 6 |
P3-1-1 Manifold, Induction, & Air Charge Cooler, Am Build
| 02***19 | O Ring | 2 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***75 | Cover, Manifold, Air Charge Cooler | 1 |
P3-2-1 Manifold, Exhaust, Am Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***85 | Manifold, Exhaust | 1 |
P3-3-2 Filter, Air, Turbocharged
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
P3-1-2 Cooler, Air Charge, Pipework, Am Build
| 02***85 | Adapter | 1 |
| 02***81 | Connector | 1 |
| 02***29 | Hose | 1 |
P3-4-3 Exhaust System, Turbo
| 02***03 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 6 |
P3-3-1 Filter, Air, Turbocharged
| 13***0Z | Bolt, M8x40 | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
P4-3-1 Radiator, Fittings & Mountings
| 13***8Z | Bolt, M10 X 30 | 1 |
| 16***61 | Coupling, Fan Drive | 1 |
| 82***16 | Strip, Rubber | 0 |
P4-4-2 Radiator & Hoses
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
P4-4-3 Radiator & Hoses
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
P4-3-2 Radiator, Fittings & Mountings
| 13***5Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M10 X 40 | 5 |
P4-3-3 Radiator, Fittings & Mountings
| 13***5Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M10 X 40 | 5 |
P4-1-1 Pump, Water, Am Build
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***00 | Pump, Water | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
P4-2-1 Thermostat, Housing, Inlet & Outlet, Am Build
| 02***95 | Plug, Taper | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
| 02***46 | O Ring | 1 |
P4-4-1 Radiator & Hoses
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
P5-5-1 Cooler, Oil, Filter & Pipework, Am Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***60 | Spacer | 1 |
| 02***05 | Seal | 1 |
P5-1-1 Sump, Oil, & Fittings, Am Build
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
P5-2-1 Pump, Oil, & Relief Valve, Am Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-3-1 Piston Cooling Jets, Am Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P6-8-1 Pump, Fuel Lift
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
| 17***00 | Pump, Fuel Lift | 1 |
P6-2-1 Injectors, Fuel, & Injection Pipes, Am Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P6-5-1 Fuel Heater, & Fuel Feed Pipe, Am Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P6-3-1 Fuel Pipes, Injection Pump, Am Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***18 | Nut | 1 |
P6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 1 |
| 02***28 | Nut | 1 |
P6-6-1 Filter, Fuel Sediment
| 32***07 | Washer, Locking | 1 |
| 32***08 | Seal | 1 |
| 32***09 | Bowl, Assembly | 1 |
P6-1-1 Pump, Fuel Injection, Am Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 2 |
| 02***63 | Bracket, Support | 1 |
P7-3-1 Pump, Vacuum, & Installation
| 15***01 | Pipe, Oil Feed | 1 |
| 15***02 | Nut, Union | 2 |
| 15***03 | Olive | 2 |
P7-2-1 Turbocharger, Pipework & Mounting, Am Build
| 02***85 | Clip | 1 |
| 02***75 | Gasket | 1 |
| 02***16 | Adapter, Union | 1 |
P7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
P7-7-2 Block Heater, Heaterless Build
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
P7-1-1 Turbocharger, Am Build
| 02***51 | Housing, Centre, Assembly | 1 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***74 | Kit-Sundry Parts | 1 |
P7-5-1 Compressor, Installation, Air Conditioning
| 01***01 | Belt, Drive | 1 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***9Z | Bolt, M16 X 35mm | 1 |
P7-7-3 Block Heater, Heater Build
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
P7-7-1 Block Heater, Freeze Plug Type, Optional, Ar Build
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
P7-4-1 Pump, Vacuum
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 4 |
| 15***13 | Key | 1 |
P8-1-1 Gasket Set, Top, Am Build
| 02***49 | Kit-Gasket, Top | 1 |
P8-2-1 Gasket Set, Bottom, Am Build
| 02***31 | Kit-Gasket, Bottom | 1 |
Frequently asked questions
What engine does the JCB 530-60 Agri Super use?
It uses a 4.8-litre Stage V compliant JCB DieselMAX four-cylinder engine producing 97kW (130hp) and 550Nm of torque.
What is the operating weight of the JCB 530-60 Agri Super?
The weight is approximately 6000 kg, with a weight with package of 6400 kg.
What model replaced the JCB 530-60 Agri Super?
The provided sources do not specify a direct successor model to the 530-60 Agri Super; it replaced the 527-58 AGRI Plus.
What 530 SUPER AG owners discuss
What engine powers the current 530-60 Agri Super, and how does its output compare to previous models?
The 530-60 Agri Super uses a 4.8-litre DieselMAX 4-cylinder Stage V engine, producing 97 kW (130 hp) and 550 Nm of torque, representing a 19% increase in horsepower and a 7% increase in torque over the previous model.
What are the known hydraulic behaviors and efficiency features of the 530-60 Agri Super?
The machine features JCB Smart Hydraulics with regenerative capabilities that harness gravitational forces to reduce fuel consumption by 15% and improve cycle time by up to 20%. It includes High Flow Auxiliary for demanding attachments, Boom End Damping for smoother cycles, and Auto Bucket Control.
What transmission type is used in the 530-60 Agri Super, and what is its top speed?
The 530-60 Agri Super utilizes a two-speed hydrostatic transmission with a Bosch Rexroth drive system. It offers a top travel speed of 40 km/h (25 mph) and a 25% increase in dynamic tractive effort at 5 km/h compared to prior models.
What are the typical wear patterns or mechanical issues reported for the 530 series (including 530/70 and 531/70) regarding steering and transmission?
Early 530 series machines experienced steering wandering and out-of-alignment issues, resolved by blanking off the anti-cavitation valve. Later models had this addressed at the factory. Transmission issues include clunky powershift gear changes (specifically 2nd to 3rd and 3rd to 2nd) and intermittent reverse engagement, often linked to solenoid or clutch pack wear.
What electrical or control system quirks are associated with the 530 series joystick and steering?
Intermittent joystick failure affecting boom and attachment functions has been reported on 531-70 Agri Super models, even after joystick replacement. Steering cylinder bypassing or lack of input has also been noted, potentially linked to valve issues or seal bypassing.
What specific structural wear points should be inspected on the 536-60 Agri Super (often grouped with 530 series discussions)?
The compression ram pins on the 536-60 are prone to shearing off retaining bolts due to inadequate grease distribution around the pin. Loose pins can cause significant damage to surrounding components if the ram breaks loose.
What to check when buying a used 530-60 Agri Super?
Verify the serial number location on the chassis frame or cab for model confirmation. Check paint condition, particularly the black powder coat which may flake if chipped. Inspect joystick functionality under load, test powershift transmission for harsh gear changes, and check compression ram pins for wear or loose retaining bolts. Have your dealer verify engine serial number and emissions package compliance.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 530 SUPER AG. Related factory variants of the same model family:
530 SUPER AG
Need a specific 530 SUPER AG part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.