JCBagriculturaltelescopic handlers (loadall)
Jcb 530-110 LE
Maintenance schedule, common problems & OEM parts breakdown
The JCB 530-110 is a compact 11-metre telehandler designed for material handling on construction, agricultural, and tunneling sites. Produced from 1995 to 1997, it features a Perkins engine delivering 71 kW (95 hp) gross power, with an operating weight of approximately 8.96 tonnes (19,753 lb). The machine offers a maximum lift capacity of 3,000 kg at full height and 1,000 kg at full forward reach. Configurations include standard and Farm Special variants, with options for servo controls and PlaceAce systems. It succeeded earlier 525-series models and was followed by the 535 and 537 series, establishing the 530 line as a versatile four-in-one machine for lift, load, grab, and access tasks.
Across its production run, the 530-110 evolved from basic mechanical controls to integrated servo and electronic PlaceAce systems, improving load moment indicator accuracy and attachment versatility. The machine remains significant in the used market due to its robust one-piece welded chassis and durable 'U' shaped boom design, which minimize stress points. Its simple hydraulic extension rams without chains and side-shift engine design facilitate easier maintenance compared to older models, making it a reliable choice for contractors seeking durable, mid-capacity telehandlers with proven serviceability.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 530-110 LE specifications
Engine
| Model | JCB 430 Stage 5 CRDi (per operation and maintenance manual description); JCB ECOMAX 444 TCIC CEV4 with EGR Cooler (per spec sheet table) |
| Gross Power | 55 kW (74 hp) at 2200 rpm |
| Displacement | 3.0 litre |
| Cylinders | 4 |
| Emissions Tier | Stage 5 |
Weights
| Operating Weight | 9060 kg (19,973 lb); 9490 kg (20,922 lb) varies by configuration/series |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 5.43 m (17.8 ft) to front carriage |
| Transport Width | 2.4 m (7.9 ft) over tyres |
| Transport Height | 2.64 m (8.7 ft) |
| Wheelbase | 2.54 m (8.3 ft) |
| Ground Clearance | 0.34 m (1.1 ft) |
| Turning Radius | 4.85 m (15.9 ft) over tyres |
Performance
| Travel Speed | 30 km/hr (18.6 mph) |
| Maximum Lift Height | 11 m (36.1 ft) |
| Maximum Forward Reach | 7.4 m (24.3 ft) to 7.52 m (24.7 ft) varies by configuration/series |
| Capacity at Maximum Height | 3000 kg (6,614 lb) |
| Capacity at Full Reach | 1400 kg (3,086 lb) with stabilisers |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 110 L (29.1 gal) |
| Hydraulic System | 120 L (31.7 gal) |
| Engine Oil | 14.2 L (3.75 gal) |
| Cooling System | 21 L (5.55 gal) |
| Transmission Oil | 18 L (4.76 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
530-110 LE fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 14.2 L (3.75 gal) | JCB 15W/40 Multigrade (SAE 15W/40, MIL-L-46152B, API CD/SE) for -10°C to 50°C; JCB Super Universal Agricultural SAE 10W/30 (MIL-L-2105, MIL-L-46152, API CD/SE) for -15°C to 30°C; JCB Torque Converter Fluid SAE 10W (MIL-L-46152, MIL-L-2104D, API CD/SE) for -18°C to 0°C. New engines filled with JCB 10W/30 Multigrade for first 100 hours. |
| Cooling System | 21 L (5.55 gal) | JCB Universal Antifreeze/water (ASTM D3306-74). 55% antifreeze mix provides freeze protection to -36°C (-33°F). |
| Fuel Tank | 110 L (29.1 gal) | Diesel Oil (ASTM D975-66T Nos. 1D, 2D). |
| Transmission (Syncro Shuttle) | 18.25 L (4.82 gal) | JCB Special Transmission Fluid (ESP-M2C 33G). |
| Hydraulic System and Tank | 120 L (31.7 gal) | JCB High Performance Hydraulic Oil ISO VG46 (for temperatures above 38°C/100°F); JCB Special Hydraulic Fluid ISO VG32 (for temperatures below 38°C/100°F). Total system capacity varies by attachment configuration. |
| Front Axle Housing | 18 L (4.75 gal) | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Rear Axle Housing | 13 L (3.43 gal) | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Front Axle Hubs (each) | 2.0 L (0.53 gal) | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Rear Axle Hubs (each) | 2.0 L (0.53 gal) | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Brake System | Not specified | JCB Light Hydraulic Fluid ISO VG15. Do not use ordinary brake fluid. |
| Grease (General) | N/A | JCB Special MPL Grease (Lithium based, No. 2 consistency). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 530-110 LE maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 530-110 LE beyond the schedule
Predictive Maintenance & Fluid Analysis
At 500 hours, collect oil samples from the engine, hydraulic tank, front axle, and rear axle to establish a baseline. Inspect the hydraulic return filter magnet for metallic debris before disposal. Monitor the engine oil level daily via the dipstick and check the hydraulic tank sight gauge. Use JCB Special Universal Agricultural oil (SAE 10W/30) for temperatures between -15°C and 30°C, or JCB 15W/40 Multigrade for -10°C to 50°C. Replace the primary and secondary fuel filters at 500 hours to protect common-rail injectors from contamination.
Corrective & Common Repairs
Address turbocharger shaft play and charge cooler boot condition during the 1000-hour service. Replace the air filter element if the restriction indicator signals. Inspect the drive belts for proper tension and wear. Check the alternator and starter motor load to prevent electrical failures. Replace the hydraulic return filter and inspect the magnet. Ensure the brake system discs are within wear limits and the immersed brakes function correctly. Verify the integrity of the hydraulic hoses and cylinder rods for chafing or scoring.
Overhaul & Rebuild Points
At 2000 hours, drain the hydraulic tank completely and clean the interior before refilling with JCB High Performance Hydraulic Oil (ISO VG46) for temperatures above 38°C or JCB Special Hydraulic Fluid (ISO VG32) below 38°C. Inspect the boom, arm, and chassis for structural cracks or unauthorized welding. Check the slew ring bolts for torque on applicable variants. Inspect the engine cylinder head and crankshaft for wear. Replace the thermostat and inspect the cooling pack for blockages.
Seasonal & Environment Servicing
In temperatures below -15°C, use JCB Torque Converter Fluid (SAE 10W) and JCB 15W/40 Multigrade oil. In temperatures above 38°C, use JCB High Performance Hydraulic Oil (ISO VG46). Check the coolant mixture for proper freeze protection using JCB Universal Antifreeze. Inspect the cabin HVAC system, including the A/C pressure and evaporator condition. Ensure the battery electrolyte is topped up on non-sealed units. Verify the operation of the reverse alarm and mirrors for visibility in low-light or dusty conditions.
530-110 LE common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/912001 | Element, Fuel Filter, Canister Type | Fuel system service | Check fitment → |
| 32/903201 | Element, Air-Primary | Air intake service | Check fitment → |
| 32/903202 | Element, Air-Safety | Air intake service | Check fitment → |
| 02/100073 | Element, Oil Filter, Canister Type - Long | Lubrication service | Check fitment → |
| 02/100284 | Element, Oil Filter, Canister Type-Short | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
530-110 LE fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 110 THR SOL | Throttle solenoid open circuit | Throttle solenoid wiring harness fault or open circuit | Inspect throttle solenoid connections and wiring for damage or disconnection |
| 203 EN TMP | Engine temperature fault | Coolant level low, thermostat failure, or sensor malfunction | Check coolant level and inspect radiator for blockage or leaks |
| 218 HYD PMP | Hydraulic pump fault | Hydraulic pump pressure loss or sensor error | Check hydraulic fluid levels and inspect pump for leaks or damage |
| 300 EC1 CAN | CAN bus communication error | CAN bus wiring fault or connector corrosion | Inspect CAN bus connectors and wiring harness for damage or loose connections |
| P0335 | Crankshaft position sensor fault | Crankshaft position sensor failure or wiring issue | Test crankshaft position sensor and inspect wiring harness |
| P0100 | Mass airflow sensor circuit malfunction | MAF sensor failure or intake air leak | Clean or replace MAF sensor and check for intake air leaks |
| P0102 | Mass airflow sensor low voltage | MAF sensor low voltage signal or wiring short | Inspect MAF sensor wiring and replace sensor if necessary |
| P0103 | Mass airflow sensor high voltage | MAF sensor high voltage signal or wiring open circuit | Inspect MAF sensor wiring and replace sensor if necessary |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
530-110 LE attachments & work tools
Standard Load Handling
The machine is equipped with shovel, forks, and hook attachments as standard. Forks are specified as industrial 1,000 mm type. The Q-fit carriage system allows for rapid attachment changeover.
Agricultural Attachments
Compatible with integrated-frame bale spears for round and rectangular bales, including dual bolt-in forged spears (34” spacing, 42” usable length) and triple bolt-in forged spears (26” spacing, 26” or 42” usable length). These are rated for 3,000 to 4,000 lbs and mount to the JCB Q-Fit system.
Specialist Attachments
Additional popular options include sweepers, man platforms, and tire handlers. The machine supports a wide array of global attachments for various industrial and construction needs.
Coupler/Mounting System
Uses the JCB Q-fit system for quick and easy attachment changeover. The system is designed to accommodate a wide range of global attachments for different job tasks.
Hydraulic Configuration
Features a single boom auxiliary as standard to power a wide range of attachments. The hydraulic system includes extension rams with no chains for heavy-duty applications.
Safety & Guarding
Includes a Load Moment Indicator (LMI) with visual and audio alerts and a clear inclinometer. The cabin is ROPS and FOPS certified with laminated glass. Stabilizer cut-off and hydraulic cut-off features ensure safe operation within load capacity.
Engine & Power
Powered by a JCB 430 Stage 5 CRDi turbocharged diesel engine. Gross power is 55 kW (74 hp) at 2,200 rpm with 440 Nm torque at 1,150 rpm. Displacement is 3.0 litres.
Lift Capacity & Height
Maximum lift capacity is 3,000 kg at a height of 11 m. It can place a normal construction or industrial load of 1,000 kg at a forward reach of 7.5 m horizontally.
Operating Weight
Operating weight is listed as 9,060 kg in product specifications and 9,490 kg in technical data sheets. Transport weight is noted as 7.8 tons in some sources.
Serial Number Applicability
Seal kit data applies to serial numbers the OEM part reference - the OEM part reference and the OEM part reference. This range is cited for both the 530-110 and 530-110 LE models.
All 530-110 LE assemblies by section
Every catalogued assembly group for the Jcb 530-110 LE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-5-1 Tooth Guard
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt, 1/2" X 2.1/4" Long | 2 |
A1-2-1 Shovel, 1.0cu.M.,, With Bolt On Toe Plate
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 2 |
| 13***1Z | Nut | 16 |
A1-5-2 Tooth Guard, 6 In 1 Clam Shovel
| 12***00 | Guard, Tooth | 1 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
A1-3-1 Shovel,Clam,6 In 1, 2260mm Wide
| 12***23 | Bush | 2 |
| 12***00 | Jaw, Clamshovel | 1 |
| 13***6Z | Bolt | 2 |
A1-1-1 Shovel,, 1.0cu.M
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A3-3-1 Guard, 'Q'Fit Carriage
| 54***00 | Guard, 'Q'Fit Carriage | 1 |
| 82***06 | Stop | 4 |
A3-2-2 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-1-1 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter | 2 |
A3-18-1 Blade, Grain Pusher
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 10ft Reach; Nsp Ref A.Little, Resurrected By K Colclough San 03763 | 1 |
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 7ft Reach; Nsp Ref A.Little | 1 |
A3-16-1 Bucket, Root Crop
| 98***00 | Shovel, Root Crop, 2290mm Wide 105 Cu.M | 1 |
| 98***00 | Bucket, Root Crop, 2290mm Wide 2.1 Cu.M | 1 |
A3-13-1 Fork, Manure, Silage, With Top Grab, & Push Off Unit, 7'6 "Wide X 65cu.Ft
| 54***01 | Bracket | 2 |
| 54***02 | Fork, Push Off Unit | 1 |
| 54***03 | Hose | 2 |
A3-34-1 Man Platform, Uk & Spain Only
| 15***00 | Pin | 2 |
| 81***84 | Decal, Warning, Platform Securing | 1 |
| 81***21 | Decal, Jcb Platform | 1 |
A3-9-1 Jib, 4 Metre, Extension
| 14***02 | Screw, Self Tapping | 4 |
| 53***01 | Link, 1.25 Ton | 1 |
| 54***00 | Jib, 4 Metre Extension, Assembly | 1 |
A3-2-3 Carriage, Fork, Industrial
| 54***00 | Frame, 1500 mm | 1 |
| 54***00 | Fork, Arm 100wx50tx1067l, Class 3b, Fork, Arm 100wx50tx1067l, Class 3b; Not Fitted On Usa Machines. All Forks Are Supplied In Matched Pairs Only And Cannot Be Replaced Individually | 1 |
| 54***00 | Fork, Industrial, 125w X 50t X 1200mm | 1 |
A3-1-10 Carriage, 'Q'Fit
| 11***20 | Boss, Pivot | 1 |
| 11***24 | Boss, Pivot | 1 |
| 13***0Z | Bolt | 2 |
A3-22-1 Fork, Round Bale, With Push Off
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
| 45***00 | Coupling, Female, 3/8" Bsp; Replaced By 45/91***00, See San04893 | 2 |
A3-11-1 Fork, Manure, Silage, 2.29m Wide X 1.9cu.M
| 54***01 | Frame | 1 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-23-1 Grab, Log, Fixed Forks, 2 To 3 Ton
| 54***00 | Grab | 1 |
| 54***01 | Frame | 1 |
| 54***03 | Grab, Arm | 2 |
A3-14-1 Bucket, Grain, Potatoe, 50 & 70 Cub.Ft 7'6" Wide
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 1.5cu.M | 1 |
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 2.1cu.M | 1 |
A3-19-1 Blade, Scraper, 7'6" (2.29m) Wide
| 54***01 | Plate, Toe | 1 |
| 54***00 | Blade, Scraper, 7'-6"(2.29m) Wide | 1 |
A3-2-1 Carriage, Fork, Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-27-1 Fork Retention Kit
| 54***01 | Link, Fork Retaining | 2 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-20-1 Blade, Snow, 7'6" (2.29m) Wide
| 54***00 | Blade, Snow | 1 |
A3-17-1 Bucket, Slurry Rehandling, 7'-6"Wide X 50cu/Ft
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Slurry/Rehandling, 2290mm Wide, 1.5cu.M | 1 |
A3-29-1 Kits
| 16***67 | Kit, Fork Transit, Toe Plates/Wide Fork | 1 |
| 16***68 | Kit, Fork Transit, Std Fork/No Toe Plat | 1 |
| 98***00 | Kit, Sideshift Carriage, Class 2b, Kit, Sideshift Carriage, Class 2b; 525-58 & 67, 505-19 & 22. Fork Frame 54***00 (See A3-2-1), Is Required To Attach This Item To Machine. | 1 |
A3-10-1 Crane Hook, Fork Mounted
| 15***00 | Pin | 2 |
| 22***67 | Circlip | 2 |
| 54***00 | Hook, (1 Tonne) Assembly, Fork Mounted | 1 |
A3-7-1 Installation, Hydraulic Pin Lock, Quickfit Carriage
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 1 |
A3-24-1 Grab, Log, Sliding Forks, 2 To 3 Ton
| 54***09 | Hose | 2 |
| 54***10 | Hose | 2 |
| 54***02 | Frame | 1 |
A3-28-1 Fork Kit, Italy
| 54***38 | Handle, Locking (Metric) | 2 |
| 54***26 | Fork, 125w X 40t X 1200l | 1 |
| 81***88 | Pin, Fork Pivot, 50.7mm, 1327mm Long | 1 |
A3-15-1 Bucket, Grain, Potatoe, 90 & 105 Cub.Ft 7'6" & 8'0" Wide
| 54***01 | Plate, Toe | 1 |
| 54***01 | Plate, Toe | 1 |
A3-8-1 Concrete Skip
| 11***00 | Pin, Lynch, With Chain | 1 |
| 54***00 | Skip, Concrete, Assembly | 1 |
| 54***01 | Spring, Shuttle | 2 |
A3-6-8 Counterweight, Front
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***8Z | Washer | 4 |
A3-21-1 Fork, Round Bale, 2 Bale Capacity
| 54***01 | Fork, Tine | 4 |
| 54***02 | Fork, Tine | 2 |
| 98***00 | Fork, Round Bale, 1820mm Wide | 1 |
A3-6-1 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 4 |
| 13***6Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 180mm Long | 4 |
A3-12-1 Fork, Manure, Silage, With Top Grab, 2.29m Wide X 1.9cu.M
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-25-1 Pole Handler, With Check Valves, & Diverter Valve Pack
| 54***00 | Attachment, Pole Planter, Complete; Nsp Ref A.Little | 1 |
| 54***01 | Frame, Front | 1 |
| 54***02 | Frame, Rear | 1 |
B Bodywork, Cab, Loader End
B1-8-1 Tank, Fuel, & Mounting Step
| 13***8Z | Bolt | 4 |
| 13***4Z | Screw | 2 |
| 13***0Z | Bolt | 1 |
B1-3-1 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 6 |
B1-10-1 Guards, Propshaft, Manual Transmission
| 13***0Z | Bolt | 1 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 1 |
| 13***9Z | Screw, M10x35mm | 4 |
B1-11-1 Fire Extinguisher, 2.5kg
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
B1-2-1 Bodywork, Engine
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***0Z | Bolt | 6 |
B1-5-9 Mirrors, Rh Front Fender
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***3Z | Nut | 3 |
| 14***3Z | Washer | 1 |
B1-6-1 Tank, Hydraulic, & Battery Box
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***77 | Cover | 1 |
| 12***71 | Padlock | 1 |
B1-5-1 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-14-1 Stabiliser, Installation
| 10***30 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***30 | Pin, Pivot | 2 |
B1-7-1 Tank, Diesel Fuel
| 10***01 | Gasket | 1 |
| 12***01 | Gasket, Filler Cap | 1 |
| 12***39 | Strainer, Fuel, Gauze | 1 |
B1-16-2 Pads,Non Slip
| 15***00 | Pad, Non Slip | 1 |
| 92***01 | Pad, Anti-Slip | 3 |
| 92***03 | Strip, Non Slip; Not Illustrated. Not Req'D In North America, Strip, Non Slip | 2 |
B1-5-8 Lens,Reversing
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 4 |
B1-12-1 Guard, Trash, Inner Boom, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B1-16-1 Clamps, Pipe, Machine
| 82***15 | Plate, Cover M6 X 45mm, @ 33mm Crs | 1 |
| 82***16 | Base, Clamp, 25.4mm Hole, M6 X 33mm Crs | 1 |
| 82***17 | Clamp, Top, 25.4mm Hole, M6 X 33mm Crs | 1 |
B1-1-1 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis; 530-110. Also M567208, Chassis | 1 |
B2-10-3 Seat, Suspension, Optional
| 40***02 | Damper | 1 |
| 40***00 | Seat, Vinyl,Suspension, Bostrom Viking 301k | 1 |
| 40***01 | Kit-Backrest, Vinyl | 1 |
B2-8-1 Mats & Fittings, Cab
| 12***05 | Cover, Dark Grey | 1 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 14***02 | Screw | 4 |
B2-4-1 Guards, Windscreen & Roof
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***8Z | Bolt | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
B2-1-1 Cab Frame
| 12***02 | Plate, Compression | 8 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 6 |
| 13***8Z | Bolt | 2 |
B2-5-1 Mirror, Cab Mounted
| 12***00 | Mirror, With Bracket | 1 |
| 12***01 | Bracket | 1 |
| 13***2Z | Bolt | 2 |
B2-10-1 Seat, Optional
| 40***00 | Seat, Fabric,Suspension, Bostrom Viking 301k | 1 |
| 40***02 | Kit-Seat Assembly, Fabric (Seat Only), Cover And Cushion; Nla Removed By San 14113.06/11***03.W Charles, For Cover Set, Use 40/91***81. | 1 |
| 40***00 | Seat, With Alarm | 1 |
B2-12-1 Cab Cover
| 99***00 | Cab, Cover | 1 |
B2-11-1 Visor, Sun, & Mirror, Rear View
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 13***3Z | Nut | 3 |
| 14***1Z | Washer, 2 Ba | 3 |
B2-9-1 Seat, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-6-1 Cab Glazing
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 4 |
| 14***1Z | Washer | 4 |
B2-1-20 Service Cab, (Not A Service Item)
| 15***00 | Cab, G.A. | 1 |
B2-7-1 Panel, Instrument, Covers & Brackets,
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 5 |
| 13***8Z | Bolt | 8 |
B2-3-1 Windscreen, Hinged
| 12***08 | Bush, Hinge | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B2-6-4 Cab Glazing, Safety Frame
| 15***84 | Cab, Canopy/Safety Frame, Tinted Roof Glass; San 22250.Mss To 15***85,15***88 And, 15***89.Req R Salter 01/03***06 | 1 |
| 82***62 | Window, R.H Side | 1 |
| 82***79 | Window, Roof, Tinted | 1 |
B2-2-1 Door & Components
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 2 |
| 12***08 | Bush, Hinge | 4 |
B2-1-7 Cab Shell
| 15***84 | Cab, Canopy/Safety Frame, Tinted Roof Glass; San 22250.Mss To 15***85,15***88 And, 15***89.Req R Salter 01/03***06 | 1 |
| 15***85 | Frame, Cab Painted & Sealed | 1 |
| 15***82 | Cab, H/Duty, Tinted Roof Glass; San25864.Make Nla Use 15***85 And What Else, Is Required From Parts Book. P Gamble 12/5/08 | 1 |
B3-4-1 Indicator, Boom Angle
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 14***4Z | Washer, Spring | 2 |
| 14***9Z | Washer | 1 |
B3-12-1 Guard, Trash, Inner Boom, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B3-1-1 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 3 |
| 13***6Z | Bolt | 6 |
B3-8-1 Boom, Pivot Pin Location
| 10***25 | Pin, Pivot | 1 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 1 |
| 10***48 | Pin, Pivot | 2 |
B3-7-1 Pads, Boom Wear
| 13***7Z | Bolt, M12x25mm Long,Tuf-Lo, K | 20 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 22 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 7 |
B5-1-1 Paint
| 42***01 | Paint, Undercoat Grey, 5 Lts | 1 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 1 |
| 42***03 | Paint, Undercoat Grey, 2.5 Lts | 1 |
B5-7-1 Safety Strut
| 15***00 | Strut, Support Lift Ram | 1 |
| 15***00 | Clamp, Bolt | 1 |
| 82***11 | Strip, Edging | 2 |
B5-5-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-3-1 Decals, Revised Livery
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B5-6-1 Tool Kit
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
| 82***21 | Spanner, Adjustable, 10in. | 1 |
B6-2-1 Homologation Parts, German, Decals
| 81***59 | Label, Marker | 2 |
| 81***30 | Label, Hydraulic Oil, German | 1 |
| 81***31 | Label, Brake Fluid | 1 |
B6-1-1 Homologation Parts, German
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 13***6Z | Bolt | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
C Electrics-Machine, Cab & Engine
C1-5-1 Indicator, Safe Load
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***2Z | Bolt | 2 |
C1-8-1 Light, Indicator, Side
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 24***02 | Grommet | 1 |
| 70***00 | Light, Side Repeater | 1 |
C1-2-25 Control, Dump
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | G.A. | 1 |
C1-8-14 Light, Reflector
| 14***02 | Screw, No 8x1/2" | 5 |
| 15***00 | G.A. | 1 |
| 15***01 | Bracket | 1 |
C1-1-1 Electrical Layout
| 13***4Z | Bolt | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***1Z | Nut | 2 |
C1-8-16 Light, Front, Rh Dip
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Right Hand Dip | 1 |
C1-27-1 Alarm, Reverse
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-15-1 Console, Cab, Servo Control
| 12***67 | Wire, Rope | 1 |
| 12***00 | Switch, Micro | 2 |
| 13***7Z | Screw | 2 |
C1-10-1 Light, Combination, Rear
| 13***4Z | Bolt | 2 |
| 15***00 | Guard, Rear Light | 2 |
| 70***01 | Lens, Indicator | 1 |
C1-1-4 Electrical Layout, Servo Control
| 14***01 | Screw, Self Tapping | 2 |
| 15***00 | Bracket, Servo Relay | 1 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 5 |
C1-8-5 Guards, Front Light, Optional
| 14***09 | Screw, Self Tapper, M8 X 2" Long | 8 |
| 26***00 | Guard, Headlight/Indicator | 2 |
C1-6-5 Sensor,Steering, Rear Axle
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***2Z | Nut, M8 | 1 |
C1-1-15 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
| 71***00 | Plug, Male, Junior Timer | 0 |
C1-17-1 Control Lever Unit, Cab Console, Servo Control
| 33***31 | Cover | 1 |
| 70***00 | Valve, Control | 1 |
| 70***01 | Lever | 1 |
C1-11-1 Switch, Column
| 13***3Z | Capscrew | 4 |
| 14***1Z | Washer, Plain | 2 |
| 15***00 | Lock, Lever | 1 |
C1-1-16 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-13-1 Isolator, Battery
| 13***6Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 4 |
C1-2-1 Instrument Panel
| 12***80 | Bracket, Packhard Retaining | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 8 |
C1-14-1 Electrics, Stabiliser
| 14***02 | Washer | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 10 |
| 70***00 | Holder, Warning Light | 1 |
C1-3-1 Instrument Cluster, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 26***01 | Clip, Connector | 2 |
C1-3-2 Instrument Cluster, 21 Kph, German
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C1-7-1 Inclinometer, Lev-O-Gage.
| 15***00 | G.A., Inclinometer | 1 |
| 70***00 | Gauge, Inclinometer/Level | 1 |
C1-3-3 Instrument Cluster, 33 Kph
| 70***00 | Cluster, Instrument, 33 K.P.H. | 1 |
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
| 70***02 | Gauge, Tachometer | 1 |
C1-20-1 Cable Guide, Remote Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 16 |
| 13***8Z | Bolt | 4 |
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 1 |
C1-2-15 Instrument Panel, Relays
| 13***3Z | Nut | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-6-4 Sensor,Steering, Front Axle
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***9Z | Screw, M10x35mm | 1 |
| 13***2Z | Nut, M8 | 1 |
C1-8-15 Light, Front, Lh Dip
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 1 |
C1-8-8 Light, Front
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 36 |
| 13***4Z | Bolt | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
C1-16-1 Control Box, Remote, Servo Control
| 13***3Z | Nut | 4 |
| 14***9Z | Washer | 4 |
| 14***01 | Screw, No.6x3/8" Posiflange, Self Tapping | 4 |
C1-9-1 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C2-3-1 Alternator, A127-65amp 12.Volt
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***05 | Rectifier | 1 |
C2-5-2 Motor, Starter, M127 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-5-1 Motor, Starter, M127 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-1-1 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-3-3 Alternator, 12volt - 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
C2-4-1 Alternator Mountings
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-3-2 Alternator, Sealed, A127m-55amp 12.Volt, Optional
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***00 | Alternator, 12volt-55amp Sealed | 1 |
| 71***01 | Capacitor, Suppression-Positive | 1 |
C3-10-1 Circuit, Interior Light, Installation
| 70***00 | Light, Interior | 1 |
| 71***00 | Harness, Cab Roof & Beacon | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-3-2 Motor,Wiper,Opening, Rear Window
| 14***02 | Screw | 1 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-4-1 Motor, Wiper, Roof Window
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-10-2 Face Level Fan, Installation
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 5 |
| 71***06 | Fuse, 15 Amp, Fuse, 15 Amp; C3 - Thermostart. On Fastrac 185ti From M636--- - Provides Ether Start Circuit Protection. | 1 |
| 71***00 | Fan, 12 Volt; Replaced By 71***40, See San 10523 | 1 |
C3-2-2 Motor, Wiper, Fixed Windscreen
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
| 14***02 | Screw | 2 |
C3-7-1 Heater, Installation
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 13***2Z | Bolt | 5 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
C3-3-1 Motor, Wiper, Rear Window,Fixed
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-12-5 Hoses, Air-Con Installation
| 99***04 | Hose, Assembly | 1 |
| 99***74 | Hose, Air Con, Evap/Rec Drier | 1 |
| 99***75 | Hose, Air Con, Evap/Compressor | 1 |
C3-5-2 Light, Beacon, Hazard Warning, Yellow, Italian
| 13***3Z | Nut | 4 |
| 14***1Z | Washer, Plain | 4 |
| 15***00 | Beacon | 1 |
C3-12-1 Air Conditioning, Installation
| 15***06 | Kit, Compressor | 1 |
| 15***07 | Kit, Evaporator Box | 1 |
| 15***08 | Kit, Condenser Box | 1 |
C3-2-1 Motor, Wiper, Hinged Windscreen
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
| 14***02 | Screw | 2 |
C3-5-1 Light, Beacon, Hazard Warning, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***03 | Belt, Driven | 1 |
C3-8-1 Light, Working, Cab Mounted
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 70***00 | Light, Auxilliary . | 1 |
| 70***06 | Insert, Switch, Working Light | 1 |
C3-12-2 Condenser, Installation
| 15***81 | 11" Fan & Motor | 1 |
| 15***08 | Kit, Condenser Box | 1 |
| 70***00 | Switch, Binary | 1 |
C3-12-3 Evaporator, Installation
| 14***11 | Washer | 2 |
| 15***07 | Kit, Evaporator Box | 1 |
| 24***09 | Grommet | 1 |
C3-11-1 Face Level Fan, Installation
| 13***2Z | Bolt | 2 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut | 2 |
C3-6-1 Heater Assembly
| 15***00 | Heater, Assembly 12v | 1 |
| 15***01 | Motor, 12 Volt | 1 |
| 15***02 | Fan, 4 Blade | 1 |
C3-9-1 Radio, Optional
| 71***00 | Aerial | 1 |
| 71***00 | Speaker, Loud, Set | 1 |
| 71***00 | Lead, Aerial Extension | 1 |
D Controls-Machine, Engine & Steering
D1-4-3 Lever Lock, Valve Control Tilt
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
D1-3-1 Gear Lever
| 12***04 | Knob | 1 |
| 13***2Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
D1-5-1 Control, Levers, Valve
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
D1-2-1 Control, Parking Brake
| 13***4Z | Bolt, 3/8"Unf X 2" | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut | 2 |
D1-4-2 Lever Lock, Valve Controls
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
D1-4-4 Lever Lock, Valve Controls, Dual Function Lever Control (Option)
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
D1-4-6 Lever Lock,, Control Tilt.
| 15***52 | Plate, Gaiter | 1 |
| 15***53 | Plate, Lock | 1 |
| 15***19 | Lock, Tilt Lever A.B.I. | 1 |
D1-2-2 Control, Parking Brake
| 13***1Z | Bolt, M8x110 | 2 |
| 13***2Z | Nut | 2 |
| 13***2Z | Nut | 2 |
D1-5-5 Control, Levers, Valve, Dual Function Lever Control (Option)
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
D1-4-5 Lever Lock, Valve Controls, Dual Function Lever Control (Option)
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
D1-1-1 Control, Dump
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | G.A. | 1 |
D1-8-1 Valve Control,Levers, Lift/Tilt, Aux1,Extn, Dual Function Lever Control (Option)
| 11***16 | Joint, Universal | 1 |
| 12***01 | Knob | 1 |
| 13***4Z | Bolt | 1 |
D1-4-1 Lever Lock, Valve Controls
| 15***00 | Bracket | 4 |
| 15***00 | Plate, Lock | 2 |
| 15***00 | Bracket, Lock | 1 |
D2-1-1 Control, Throttle
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***2Z | Nut | 1 |
| 13***2Z | Nut | 2 |
D2-2-1 Control, Throttle, Servo Build
| 13***3Z | Nut | 3 |
| 13***4Z | Screw | 3 |
| 14***1Z | Washer, 2 Ba | 3 |
D3-2-1 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
D3-1-1 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
E Hydraulics & Air Including, Steering
E1-3-1 Circuit, Lift End
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
| 15***01 | Adapter, Banjo | 2 |
| 15***01 | Pipe, Assembly | 1 |
E1-1-19 Circuit,Neutral,, Anti-Cavitation,, Servo Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
E1-14-1 Circuit, Auxiliary, Pressure Relief, Servo
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***01 | Bracket, Ball Valve | 1 |
| 16***04 | Adapter | 1 |
E1-12-1 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E1-6-1 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly Lh | 1 |
E1-1-1 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-11-1 Circuit, Stabiliser
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 6 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-1-2 Circuit, Neutral, Anti-Cavitation, Servo Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-5-1 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
E1-13-1 Circuit, Sideshift Carriage
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, Male 3/8"Bsp, C/W 2x, 22***33 Circlips | 1 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E2-3-1 Pump, Steering, & Fan Drive
| 20***00 | Pump, Steer/Fan | 1 |
| 20***01 | Kit-Seal | 1 |
| 20***02 | Pump, Front Replacement | 1 |
E2-2-1 Pump, Main Hydraulic, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
| 13***9Z | Bolt, M16 X 190 Long | 1 |
E2-5-1 Motor, Fan Drive
| 20***00 | Motor, Fan; Ultra Pump. For 'Farm Special Plus' Machines, Refer To Ti 5/85 , See Then Frame E2-5-3, Motor, Fan | 1 |
| 20***01 | Kit-Seal, Fan Motor | 1 |
| 20***02 | Kit, Releif Valve | 1 |
E2-6-1 Motor, Fan Drive, Installation
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E2-1-1 Pump, Main Hydraulic
| 20***00 | Pump | 1 |
| 20***01 | Kit-Seal, 40l Pump | 1 |
| 20***02 | Kit, Nut, Washer & Key | 1 |
E2-4-1 Pump, Steering, & Fan Drive, Adapters & Drive Gear
| 12***75 | Gear, Helical 16 Teeth | 1 |
| 13***02 | Nut | 1 |
| 15***09 | G.A. | 1 |
E3-9-1 Valve, Selector, Installation
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***0Z | Bolt | 2 |
E3-5-1 Filter, Hydraulic
| 13***0Z | Bolt | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***7Z | Washer, Spring | 2 |
E3-1-6 Valve Mounting
| 13***0Z | Bolt | 3 |
| 13***2Z | Bolt | 1 |
| 13***0Z | Bolt | 2 |
E3-18-1 Valve, Sections, Operating, Proportional Servo
| 13***2Z | Nut, M8 | 0 |
| 15***01 | Lever, Manual Override | 0 |
| 25***35 | Seal, Kit | 1 |
E3-7-1 Valve, Steering, Standard
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***04 | Bearing, Front | 1 |
| 35***05 | Bearing; Use 35/40***04 | 1 |
E3-3-1 Valve, Section, Components & Levers
| 13***2Z | Nut | 4 |
| 25***27 | Plate, Seal Retainer | 12 |
| 25***30 | Seat, Spring | 12 |
E3-2-1 Valve, Components
| 25***09 | Washer | 2 |
| 25***01 | Rod, Tie | 1 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
E3-9-4 Valve, Selector
| 25***00 | Valve, Selector/Diverter; Supersede 25/96***00 To 25/22***94. San 13767 | 1 |
| 25***01 | Pin, Selok | 1 |
| 25***02 | Spring | 1 |
E3-9-5 Valve,Selector
| 25***94 | Valve, Selector/Divertor | 1 |
| 25***60 | Kit-Seal | 1 |
| 25***61 | Kit, Roller | 1 |
E3-15-1 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Assembly, 6 Spool | 1 |
| 25***00 | Valve, Assembly, 5 Spool | 1 |
| 25***00 | Valve, Assembly, 6 Spool | 1 |
E3-19-1 Valve Mountings, With Levers, Proportional Servo Control
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E3-1-9 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***04 | Plate, Valve Top | 1 |
| 25***19 | Valve, Assembly, 6 Spool | 1 |
E3-17-1 Valve, Section, Main Components, Proportional Servo
| 25***01 | Spool, Assembly | 1 |
| 25***22 | Body, C/W Check Valve, Body, C/W Check Valve; Auxiliary 1 & 2. Consists Of Item 1 & 8 Only | 0 |
| 25***23 | Spool, Assembly; Lift, Tilt, Auxiliary 1 & 2, Hydraulic Hitch, Extend. Not Extend On 530-95, Spool, Assembly | 1 |
E3-6-9 Valve,Steering Mode, & Mounting
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E3-30-1 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 32***01 | Element, 25 Micron | 1 |
E3-1-1 Valve, Assembly, 6 Spool
| 25***00 | Valve, Block 6 Spool | 1 |
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
E3-6-8 Valve, Steering Mode
| 12***86 | Block | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 8 |
E3-16-1 Valve, Sections, End Plate, & Pump Side, Proportional Servo
| 25***01 | Plate, End | 1 |
| 25***03 | Washer | 6 |
| 25***04 | Nut | 6 |
E3-6-1 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***1Z | Nut | 2 |
E4-16-2 Ram, Carriage, Sideshift
| 54***01 | Ram, Sideshift Carriage | 1 |
| 54***02 | Kit-Seal, Sideshift Carriage, Ram | 1 |
| 54***03 | Cylinder | 1 |
E4-15-1 Ram, Log Grab, Manure Silage Fork, Fixed & Sliding , Bale Grab
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-9-1 Ram, Steering, Front & Rear Axles
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-1-1 Ram, Lift
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-12-1 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***19 | Seal, Dowty | 3 |
E4-8-1 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-17-1 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 12***27 | Pipe | 1 |
E4-16-1 Ram, Carriage, Sideshift
| 99***00 | Ram, Sideshift, Complete | 1 |
| 99***01 | Cylinder | 1 |
| 99***02 | Rod, Piston | 1 |
E4-11-1 Ram,Extension,Inner
| 12***15 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***3Z | Bolt, M10 X 16 | 3 |
E4-20-1 Circuit, Remote Greasing, Rear
| 14***01 | Washer, Aluminium | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 3 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
E4-13-1 Ram, Stabiliser
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
E4-3-1 Ram, Displacement
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F Axles, Wheels & Transmission
F1-7-1 Ram, Steering, Front Axle, Installation
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 91***00 | Pin, Pivot, 105mm X 25mm Dia. | 4 |
F1-2-10 Crown Wheel & Pinion, Axle 453/33290
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-1-10 Axle Breather
| 45***02 | Plug, Breather | 1 |
| 45***03 | Breather, Plastic | 1 |
F1-4-1 Knuckle, Steering, & Track Rod
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 16 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F1-2-1 Differential, Assembly, Pad Mounted
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F1-8-1 Axle, Pad Mounted, Shims
| 15***09 | Shim, Axle, 3mm Thick, Shim, Axle, 3mm Thick; See Note 2. Axle Shim | 0 |
F1-2-2 Differential Assy, For Axle 453/33290
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F1-1-1 Axle Assembly, Drive, Steering, 3 Piece Pad Mounted
| 13***2Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
| 14***0Z | Washer, Plain | 4 |
F2-8-1 Axle Pivot, Rear, None Overload
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***2Z | Bolt | 2 |
F2-4-1 Knuckle, Steering, & Track Rod
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 16 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F2-6-1 Ram, Steering, Rear Axle, Installation
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 91***00 | Pin, Pivot, 105mm X 25mm Dia. | 4 |
F2-2-1 Differential, Assembly
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F2-1-1 Axle Assembly, Drive, Steering, Pivot Mounted
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
F2-2-8 Differential, Components
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Gear Kit | 1 |
F2-5-1 Shaft, Drive
| 91***00 | Shaft, Drive Assembly, 1240.1mm Long; Replaced By Mss 91***00 + 82***94, See San08701 | 1 |
| 91***01 | Shaft, Axle Side, 926.0mm Long | 1 |
| 91***00 | Shaft, Drive Assembly, 790mm Long; Replaced By 91***00 + 82***94, See San08701 | 1 |
F2-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F3-2-1 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Goodyear, 15.5-25x12ply Tract., Wheel, Assembly, Goodyear, 15.5-25x12ply Tract.; See Note 1. Change In Matching Sets.Do Not Mix Tires | 4 |
| 15***00 | Wheel, Assembly, 15.5 R25, Michelin Xtla | 4 |
F3-1-1 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F6-2-1 Gearbox, External Components, Permanent 4 Wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
F6-1-1 Gearbox, 4 Speed, Permanent 4wd
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
| 44***12 | Spacer | 1 |
F6-2-5 Gearbox, External Components, 2/4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F6-4-1 Clutch, Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F6-1-9 Gearbox, 4 Speed, 2/4wd
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
| 44***00 | Kit-Shim | 1 |
F6-10-1 Cooler, Oil, & Installation
| 13***2Z | Bolt | 2 |
| 15***06 | Pipe | 1 |
| 15***07 | Pipe | 1 |
F6-6-2 Gear Change, 3 Speed
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
| 44***00 | Lever, Assembly | 1 |
F6-6-1 Gear Change
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
| 44***00 | Lever, Assembly | 1 |
F6-1-5 Gearbox, 3 Speed, Permanent 4wd
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
| 44***12 | Spacer | 1 |
F6-8-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F6-11-1 Flywheel Housing, Cover Plate
| 13***3Z | Screw, M8 X 16 | 1 |
| 44***03 | Cover, Flywheel Housing, 110mm X 79mm X 17mm | 1 |
| 99***00 | Cover, Plate Assembly, Flywheel | 1 |
F6-1-13 Gearbox, 3 Speed, 2/4wd
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
| 44***00 | Kit-Shim | 1 |
F6-3-1 Gearbox Components, Permanent 4 Wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***07 | Gear, 31t - 3rd | 1 |
F6-9-1 Transmission, Mounting
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F6-5-1 Shaft, Output Group, 2/4 Wheel Drive
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-3-5 Gearbox Components, 2/4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
G Brakes
G1-4-2 Brake,Parking
| 13***04 | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***3Z | Nut, Lock, M10 | 1 |
G1-3-1 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
G1-1-1 Brake System,, Front.
| 15***02 | Pipe, Brake L/H | 1 |
| 15***03 | Pipe, Brake L/H | 1 |
| 15***25 | Pipe, Brake R/H | 1 |
G1-4-1 Brake, Parking
| 13***4Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 15***00 | Caliper, Park Brake; San 14253.15/91***00 Ss To 15/92***71. See Pis, 460/382 & A00/278. M Rogers Req.P G. 30/4/03 | 1 |
G1-5-1 Brake, Components, Front Axle
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***13 | Pin, Reaction | 6 |
G1-2-1 Brake, Parking, Installation
| 15***86 | Caliper, Parkbrake, Hayes; San 20751.Superseded By 15/92***72.Pi 449/178, P Gamble.07/10***04 | 1 |
| 33***89 | Bracket, Reaction | 1 |
| 44***01 | Flange, Disc, 35 Teeth; Replaced By 46***09, See San09392 | 1 |
G1-4-3 Brake Caliper, Parking
| 15***03 | Kit, Spring | 1 |
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
| 15***86 | Caliper, Parkbrake, Hayes; San 20751.Superseded By 15/92***72.Pi 449/178, P Gamble.07/10***04 | 1 |
P Engine
P1-8-1 Engine Mountings
| 11***09 | Washer | 4 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 2 |
P1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-7-1 Flywheel & Housing
| 02***78 | Gear, Starter Ring | 1 |
| 02***37 | Flywheel, Assembly | 1 |
| 02***25 | Washer | 6 |
P1-5-1 Fans, Pulleys, & Fan Belt
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
P1-2-2 Engine, Long, Ar Build, 100bhp
| 02***36 | Engine, Short | 1 |
P1-6-1 Timing Case, Camshaft & Gears, Ak Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-1-1 Engine, Complete, Ak Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 100bhp | 1 |
P1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P1-3-1 Block Assembly, Ak Builds
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-3-2 Block Assembly, Ak Builds
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-2-1 Engine, Short, Ak Builds
| 02***60 | Engine, Short, Turbo | 1 |
P2-3-1 Rocker Cover, Ak Build
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
| 02***59 | Bracket | 1 |
P2-2-1 Rocker Assembly, Push Rods & Tappets, Ak Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-2-2 Rocker Assembly, Push Rods & Tappets, Ak Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P2-1-1 Cylinder Head, Ak Build
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P2-4-1 Lifting Plates, Engine, Ak Build
| 02***13 | Plate, Lifting | 1 |
| 02***31 | Plate, Lifting | 1 |
| 02***71 | Bolt | 2 |
P3-3-1 Filter, Air, Ak Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Spring | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
P3-2-1 Manifold, Exhaust, Ak Builds
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***85 | Manifold, Exhaust | 1 |
P3-4-1 Silencer & Extension, Ak Build
| 02***43 | Bolt | 1 |
| 13***4Z | Bolt | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
P3-1-1 Manifold, Induction, Ak Build
| 02***89 | Hose, Induction | 1 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 1 |
| 02***53 | Manifold, Air Induction | 1 |
P4-1-1 Pump, Water, Ak Build
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
| 02***10 | Pump, Water | 1 |
P4-4-1 Radiator & Hoses, Ak Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
P4-3-1 Radiator, Fittings & Mountings, Ak Build
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 2 |
P4-2-1 Thermostat, Housing, Inlet & Outlet, Ak Build
| 02***95 | Plug, Taper | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
| 02***46 | O Ring | 1 |
P5-3-1 Piston Cooling Jets, Ak Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P5-1-1 Sump, Oil, & Fittings, Ak Build
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***02 | Clip | 1 |
P5-2-2 Pump, Oil, & Relief Valve, Ak Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-5-1 Cooler, Oil, Filter & Pipework, Ak Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 2 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
P6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
P6-5-1 Fuel Heater, & Fuel Feed Pipe, Ak Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 2 |
P6-2-1 Injectors, Fuel, & Injection Pipes, Ak Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-1-1 Pump, Fuel Injection, Ak Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***63 | Bracket, Support | 1 |
P6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***18 | Nut | 4 |
| 02***22 | Olive | 4 |
| 02***05 | Nut | 1 |
P6-8-2 Pump, Fuel Lift
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
| 17***00 | Pump, Fuel Lift | 1 |
P6-3-1 Fuel Pipes, Injection Pump, Ak Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***18 | Nut | 1 |
P6-6-2 Filter, Fuel Sediment
| 32***07 | Washer, Locking | 1 |
| 32***08 | Seal | 1 |
| 32***09 | Bowl, Assembly | 1 |
P6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
P7-3-1 Pump, Vacuum, & Installation
| 15***01 | Pipe, Oil Feed | 1 |
| 15***02 | Nut, Union | 2 |
| 15***03 | Olive | 2 |
P7-4-1 Pump, Vacuum
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 4 |
| 15***13 | Key | 1 |
P7-1-2 Turbocharger, Ak Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
| 02***74 | Kit-Sundry Parts | 1 |
P7-7-1 Block Heater, Freeze Plug Type, Optional
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
P7-1-1 Turbocharger, Ak Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***71 | Housing, Compressor | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
P7-2-1 Turbocharger, Pipework & Mounting, Ak Builds
| 02***85 | Clip | 1 |
| 02***75 | Gasket | 1 |
| 02***16 | Adapter, Union | 1 |
P8-2-1 Gasket Set, Bottom, Ak Builds
| 02***65 | Kit-Gasket, Bottom | 1 |
P8-1-1 Gasket Set, Top, Ak Builds
| 02***49 | Kit-Gasket, Top | 1 |
530-110 LE serial number reference
For the 530-110 LE (serials 0586033-0587099), the identification plate is riveted to the right-hand chassis frame near the operator-cab access step. A duplicate serial is stamped into the main chassis frame between the front and rear axles. For earlier 530-110 models (from serial 563359), the plate is located inside the cab on the right-hand cab pillar or dash console. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 0586033 - 0587099 | JCB 530-110 LE (1999-2001 build period) | |
| 0561000 - 0580000; 0585765 | JCB 530-110 (PlaceAce Controls) | |
| 563359 Onwards | JCB 530-110 (Base model start serial) |
Frequently asked questions
What engine does the JCB 530-110 use?
The JCB 530-110 uses a Perkins engine delivering 71 kW (95 hp) gross power.
What is the operating weight of the JCB 530-110?
The operating weight is approximately 8.96 tonnes (19,753 lb).
What model replaced the JCB 530-110?
The 530-110 was succeeded by the 535 and 537 series telehandlers.
What 530-110 LE owners discuss
What engine powers the JCB 530-110 LE, and what are its key performance specifications?
The JCB 530-110 LE uses a JCB 430 Stage 5 CRDi turbocharged diesel engine. It delivers 55 kW (74 hp) at 2200 rpm and generates 440 Nm of torque at 1150 rpm. The engine has a 3.0-litre displacement.
How does the powertrain behave, and what are common transmission issues reported by operators?
The machine utilizes a powershift transmission. Operators report that gear shifts can be sharp or clunky, particularly when shifting down gears. This behavior is often an exaggeration of wear in older units. Early 530-series machines also experienced steering wandering and alignment issues, which were resolved by blanking off the anti-cavitation valve.
What are the typical wear patterns and maintenance requirements for the undercarriage and boom?
The telehandler features a dry lubricant system for wear pads with service intervals of 500 hours. Boom hoses require JCB Special Slide Lubricant. Greasing intervals vary: if JCB MPL Grease is used, 50-hour operations must be performed every 10 hours, and 500-hour operations every 50 hours.
Are there known electrical or sensor issues specific to this model?
Operators have reported intermittent fuel gauge cycling on JCB Loadall models, where the gauge indicates low fuel despite adequate levels. Replacing the sender or cluster has not always resolved the issue, suggesting potential file or part number mismatches. Additionally, joystick functionality can fail intermittently, particularly when using attachments like hay round bale grabs, requiring joystick replacement.
What hydraulic fluid specifications and capacities are recommended for the JCB 530-110?
The total hydraulic system capacity depends on the equipment configuration; fill with all rams closed and monitor the sight glass. Coolant mixture requires 55% antifreeze, starting to freeze at -36° C (-33 °F). The coolant capacity is 12.92 litres (3.41 gal) for certain configurations and 9.35 litres (2.47 gal) for others. Use JCB Hydraulic Oil Special or equivalent.
What is the operating weight and lift capacity of the JCB 530-110 LE?
The operating weight varies by configuration and series, ranging from 7.8 tons to 9.49 tons (14,990 lbs). The nominal load capacity is 3 tons at the center of gravity, with 1 ton at full forward reach. Maximum lift height is 11 metres.
What should be checked when buying a used JCB 530-110 LE?
Verify the serial number range (the OEM part reference-the OEM part reference for the LE model, 1999-2001). Check the torque converter for leaks, as this is a known failure point. Inspect the steering system for wandering, especially on early 530-series units. Test the joystick for intermittent failure when using attachments. Ensure the fuel sender and cluster are functioning correctly. Have your dealer verify the exact serial range specifications and fluid capacities.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 530-110 LE. Related factory variants of the same model family:
530-110 LE
Need a specific 530-110 LE part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.