JCBagriculturaltelescopic handlers (loadall)
Jcb 526S
Maintenance schedule, common problems & OEM parts breakdown
The JCB 526S is a telescopic handler (Loadall) manufactured from 1997 to 2004. It weighs approximately 5.84 tons and lifts 2.6 tons at full height. The machine uses a Perkins 4-cylinder turbocharged engine producing 106 hp. It features a 4-speed synchromesh gearbox with torque converter and syncro shuttle. Configurations include AWS (All Wheel Steering) and RS (Rear Steering) variants.
The 526S succeeded the 520/526 series and preceded the 526-56. It matters in the used market for its durable Perkins engine and simple hydraulic system. Parts availability remains high due to its widespread use in construction and agriculture. The machine is valued for its reliability and ease of maintenance compared to modern electronic-heavy models.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 526S specifications
Engine
| Model | JCB 444 (also listed as Perkins 4 cylinder in some dealer literature) |
| Gross Power | 63 kW (84.5 hp) @ 2200 rpm |
| Displacement | 4.4 L (268.6 cu in) |
| Cylinders | 4 |
| Aspiration | Naturally aspirated (some dealer sources list Turbocharged @ 106 hp; varies by configuration/series) |
| Max Torque | 236.1 lb ft (320 Nm) @ 1200 rpm |
Weights
| Operating Weight | 5,840 kg (12,848 lb) (varies by configuration/series; published references cites 5.84 tons for 526-55 S) |
Dimensions
| Transport Length (to fork face) | 15.16 ft (4620 mm) |
| Transport Width (over tires) | 7.29 ft (2220 mm) |
| Transport Height | 7.91 ft (2410 mm) |
| Wheelbase | 7.68 ft (2340 mm) |
| Ground Clearance | 1.48 ft (450 mm) |
| Turning Radius (outside tires) | 11.09 ft (3380 mm) |
Performance
| Max Forward Speed | 30 km/h (18.7 mph) |
| Max Reverse Speed | 30 km/h (18.7 mph) |
| Max Lift Capacity | 5732.02 lb (2600 kg) |
| Max Lift Height | 18.41 ft (5610 mm) |
| Max Forward Reach | 9.72 ft (2960 mm) |
| Max Load at Max Reach | 2204.63 lb (1000 kg) |
| Max Load at Max Height | 5732.02 lb (2600 kg) |
Service capacities (summary)
| Fuel Tank Capacity | 160 L (42.3 gal) |
| Hydraulic System Fluid Capacity | 100 L (26.5 gal) |
| Engine Oil Capacity | Not documented for this exact serial range — verify with your dealer |
| Cooling System Capacity | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
526S fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 12-15 L (3.2-4.0 US gal) | JCB 10W/30 Multigrade (first 100 hours for new/reconditioned engines); thereafter use lubricant recommended by JCB (viscosity varies by climate) |
| Cooling system | 12-15 L (3.2-4.0 US gal) | RAVENOL HTC Hybrid Technology Coolant Premix -40°C |
| Fuel tank | 160 L (42.3 US gal) | Diesel fuel |
| Transmission | Not documented for this exact serial range — verify with your dealer | RAVENOL STOU SAE 10W-30 (meets Allison C-4, Caterpillar TO-2, ISO VG 68 HVLP) |
| Hydraulic system and tank | 100 L (26.4 US gal) | JCB Genuine Hydraulic Oil (or equivalent meeting JCB specifications) |
| Grease | N/A | Lithium based, NLGI No. 2 consistency |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 526S maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 526S beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil and hydraulic fluid samples every 500 hours. Check the hydraulic return filter magnet for metallic debris. Inspect coolant concentration and condition at 1000 hours. Track turbocharger shaft play and wastegate function. Record ECM fault codes during the 1000-hour service. Analyze transmission oil for gear wear indicators.
Corrective & Common Repairs
Replace worn brake discs and service immersed brakes. Repair hydraulic hose chafing and cylinder rod scoring. Fix leaking kingpost and boom pivot seals. Replace alternator and starter components showing load test failure. Address syncro shuttle transmission wear. Repair or replace turbocharger boots and charge cooler connections.
Overhaul & Rebuild Points
Rebuild the Perkins 444 engine at high hour intervals. Overhaul the torque converter and syncro shuttle transmission. Rebuild the hydraulic pump and relief valves. Replace undercarriage rollers and track shoes on wheeled variants. Rebuild the drop box and final drives. Inspect and replace worn slew ring bolts if applicable.
Seasonal & Environment Servicing
Check battery electrolyte levels on non-sealed units. Inspect drive belts for tension and wear. Grease all pivot points before winter storage. Drain and clean the fuel tank to prevent water accumulation. Inspect cabin HVAC for proper cooling and heating. Check tire pressure and tread depth for seasonal load changes.
526S common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/903001 | Element, Air - Primary | Air intake service | Check fitment → |
| 32/903002 | Element, Air - Safety | Air intake service | Check fitment → |
| 02/100073 | Element, Oil Filter, Canister Type - Long | Lubrication service | Check fitment → |
| 02/100284 | Element, Oil Filter, Canister Type-Short | Lubrication service | Check fitment → |
| 126/78200 | Filter, Hydraulic Assembly, 5 Micron | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
526S fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Fuel filter blockage, lift pump failure, or pressure regulator fault | Check fuel filter condition and fuel supply pressure |
| P0112 | Intake air temperature sensor malfunction (low voltage) | Sensor short circuit to ground or wiring fault | Inspect sensor connector for corrosion and check wiring continuity |
| P0117 | Engine coolant temperature sensor circuit low voltage | Coolant level low, sensor failure, or short to ground | Verify coolant level and inspect sensor wiring harness |
| P0521 | Engine oil pressure sensor range/performance issue | Low oil level, sensor drift, or electrical fault | Check engine oil level and test sensor output signal |
| P2047 | Reductant injector circuit open (SCR system) | DEF injector wiring fault or clogged injector nozzle | Inspect DEF injector connector and check for injector blockage |
| U0100 | Lost communication with Engine Control Module | Loose battery terminals, poor ground strap, or CAN bus fault | Check battery voltage and clean ground connections |
| 101 | Low transmission clutch pressure | Transmission fluid low, pump wear, or valve body issue | Check transmission fluid level and inspect for leaks |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
526S attachments & work tools
Forks
Standard telescopic handler forks are the primary attachment for the JCB 526S. The machine supports standard pallet forks with varying lengths to suit material handling tasks. Capacity ratings vary by configuration and series depending on the specific load chart and reach.
Quick Coupler
A quick coupler system is available to facilitate rapid attachment changes. This allows the operator to switch between forks and other compatible tools without leaving the cab. The coupler mounts directly to the boom tip.
Hydraulic Kit
Attachments requiring auxiliary hydraulics, such as certain buckets or grapples, require a specific hydraulic kit. This kit provides the necessary flow and pressure connections at the boom tip. Total hydraulic system capacity depends on the equipment being used.
Guarding
Factory guarding options include boom wear pads to prevent surface oxidation and structural binding during extension cycles. The integration of specific waxoyl application on boom runways is critical for maintenance. Guarding protects the boom structure from wear caused by attached tools.
All 526S assemblies by section
Every catalogued assembly group for the Jcb 526S. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-5-1 Bucket, Root Crop
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
| 82***15 | Screw | 4 |
A1-1-1 Shovel, 0.9cu.M.
| 13***1Z | Nut | 16 |
| 13***1Z | Nut | 12 |
| 14***2Z | Washer, M20 | 12 |
A1-12-1 Shovel, 1.25 Cu. Yds, 8' Wide
| 13***1Z | Nut | 12 |
| 14***1Z | Washer, M16 Plain | 12 |
| 54***76 | Shovel, 8' Wide, 1.25cu. Yds | 1 |
A1-3-1 Bucket, Grain, Potato
| 98***00 | Shovel, Grain/Potato 1.38 M., 2110mm Wide | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A1-2-1 Tooth Guard
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***6Z | Bolt, M12 X 70mm | 2 |
| 13***1Z | Nut | 2 |
A1-14-1 Bucket, Grain
| 54***00 | Bucket, Grain, 70cu Ft | 1 |
A1-4-1 Bucket, Rehandling
| 51***02 | Kit-Nut & Bolt, M20 | 14 |
| 51***06 | Kit-Nut & Bolt, M16 | 14 |
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
A1-6-1 Shovel, Clam, 4 In 1
| 51***02 | Kit-Nut & Bolt, M20 | 14 |
| 51***06 | Kit-Nut & Bolt, M16 | 14 |
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
A1-10-1 Tooth Guard
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt, 1/2" X 2.1/4" Long | 2 |
A1-11-1 Shovel, 1.0cu.M., 2235mm (7'4") Wide
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A1-6-2 Shovel,, Clam,6 In 1,, 2260 Wide.
| 12***23 | Bush | 2 |
| 12***00 | Jaw, Clamshovel | 1 |
| 13***6Z | Bolt | 2 |
A1-11-2 Shovel,0.9cu.M.,, 2286mm (7'6")Wide
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 1 |
| 13***01 | Nut | 16 |
A1-13-1 Shovel, 1.2cu.M., 2286mm (7'6") Wide
| 13***18 | Bolt | 2 |
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
A3-21-1 Fork Frames & Forks, Industrial
| 54***17 | Fork, Frame 1370mm Wide | 1 |
| 54***37 | G.A. | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-19-1 Tow Hitch, Manual, Installation
| 10***03 | Wire, Retaining | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-2-1 Quickhitch, Hydraulic
| 13***0Z | Capscrew, M12x40 | 6 |
| 16***03 | G.A. | 1 |
| 24***21 | O Ring | 2 |
A3-13-1 Grab, Log, Fixed Forks, 2 To 3 Ton
| 54***03 | Grab, Arm | 2 |
| 54***04 | Pin, Pivot | 2 |
| 54***05 | Pin, Pivot | 2 |
A3-21-10 Bucket, Multi
| 98***01 | Bucket | 1 |
| 98***20 | Ram, Assembly (12" X 3"), (Kv Tine) | 1 |
A3-17-1 Fork, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 81***68 | Plate, Rating | 1 |
A3-1-5 Fork Frame, Forks & Load Guard
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***9Z | Bolt, M12x90mm | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
A3-21-8 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-7-1 Crane, Fork Mounted
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 1 |
A3-16-1 Jib, 4 Metre, Extension, 350kg
| 53***01 | Link, 1.25 Ton | 1 |
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
A3-21-5 Carriage, Fork, Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-47-1 Box Tipper,Sideways
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-49-1 Multi-Shovel
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 8 |
A3-45-1 Bucket, Grain, Potato
| 98***01 | Toeplate, Weld On | 1 |
| 98***00 | Bucket, Grain & Potato | 1 |
A3-2-5 Quickhitch, Hydraulic Installation
| 14***11 | Seal, Bonded | 3 |
| 16***02 | Adapter, 1/4" Bsp M/M | 3 |
| 54***04 | Lug | 2 |
A3-5-2 Tow Hitch,, Hydraulic 526s Only, 24" Wheels Only
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
A3-6-1 Tow Hitch, Hydraulic, Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut | 4 |
A3-42-1 Fork, Manure, Silage, With Parallel Push Off
| 98***01 | Ram, Assembly | 2 |
| 98***00 | Fork, Manure & Push Off | 1 |
| 98***01 | Fork, Tine; Same As 54***03 See San 08844. San Done Due, To Strimech Information To M Roberts(Attach) | 9 |
A3-14-1 Heston Bale Grab
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Clamp, Heston Bale Grab | 1 |
A3-8-1 Concrete Skip
| 11***00 | Pin, Lynch, With Chain | 1 |
| 54***00 | Skip, Assembly | 1 |
| 54***01 | Spring, Shuttle | 2 |
A3-5-1 Tow Hitch, Hydraulic
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
A3-46-1 Bucket, Rehandling
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Slurry/Rehandling | 1 |
A3-25-2 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A3-4-1 Quickhitch, Tool Carrier
| 15***01 | Ring, Key 38mm Diameter, Approx | 1 |
| 16***07 | Wire, Rope, 650mm Long | 1 |
| 54***04 | Lug | 2 |
A3-30-1 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-6-5 Tow Hitch, Hydraulic, Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut | 4 |
A3-43-1 Fork, Manure, Silage, With Top Grab, 2.29m Wide X 1.9cu.M
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-25-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
A3-28-1 Sweeper Collector, Mounting Frame
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A3-23-2 Big Bale Grab
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 1 |
| 54***07 | Kit-Seal | 1 |
| 98***00 | Grab, Bale | 1 |
A3-40-1 Kits
| 54***30 | Fork, Frame & Side Shift, Complete | 1 |
| 98***00 | Carriage, Sideshift Assembly | 1 |
| 98***00 | Attachment, Sweeper Collector, Kit | 1 |
A3-32-1 Quickhitch, Hydraulic
| 13***0Z | Capscrew | 6 |
| 24***21 | O Ring | 2 |
| 24***02 | Seal, Gland | 2 |
A3-18-1 Guard, Load, 'Q'Fit Carriage
| 54***19 | G.A. | 1 |
| 54***71 | Guard, Q-Fit | 1 |
| 82***03 | Grommet | 4 |
A3-10-3 Muck Fork
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-24-1 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter | 2 |
A3-26-1 Sweeper Collector, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-44-1 Fork, Manure, Silage
| 54***01 | Frame | 1 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-1-1 Fork Frame, Forks & Load Guard
| 13***8Z | Bolt, M10x80 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
A3-10-1 Fork, Manure, Silage, With Top Grab, 2.29m Wide X 1.9cu.M
| 54***04 | Bolt, Nut | 4 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-19-5 Tow Hitch, Manual, Installation
| 10***03 | Wire, Retaining | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-48-1 Multi Bucket
| 33***06 | Toeplate 7ft Multi | 1 |
| 33***14 | Toeplate, Reversible | 1 |
| 90***00 | Ram, Assembly, 2.3/8" X 8" | 1 |
A3-4-8 Installation, Hydraulic Pin Lock, Quickfit Carriage
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***2Z | Screw, M6 X 50 | 1 |
A3-23-1 Flat 8 Bale Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-33-1 Quickhitch, Hydraulic Installation
| 14***11 | Seal, Bonded | 3 |
| 16***02 | Adapter, 1/4" Bsp M/M | 3 |
| 54***04 | Lug | 2 |
A3-10-2 Muck Fork, & Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-3-1 Quickhitch, Carriage
| 15***01 | Ring, Key 38mm Diameter, Approx | 1 |
| 16***45 | G.A. | 1 |
| 16***02 | G.A. | 1 |
A3-41-1 Fork, Manure, Silage, With Top Grab, & Parallel Push Off
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-31-1 Wrapped Bale Clamp
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
| 13***3Z | Nut, M20 | 3 |
A3-4-5 Quickhitch, Carriage
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-9-1 Fork, Manure, Silage
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
| 54***04 | Nut | 9 |
A3-12-1 Fork, Manure, Silage, With Top Grab, & Parallel Push Off
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Fork, Manure, Silage, Push Off & Top Grab | 1 |
A3-15-1 Fork, Round Bale
| 54***03 | Fork, Tine, Long | 4 |
| 81***15 | Plate, Operator Instruction, Norwegian | 4 |
| 81***68 | Plate, Rating | 1 |
A3-29-1 Silashear
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-22-1 Man Platform, Uk & Spain Only
| 15***00 | Pin | 2 |
| 81***84 | Decal, Warning, Platform Securing | 1 |
| 81***21 | Decal, Jcb Platform | 1 |
A3-4-7 Guard, Load, 'Q'Fit Carriage
| 54***00 | G.A. | 1 |
| 54***00 | Guard, Load; San 23375.Mss To 33***49 & 83***67.28/2/7, P Gamble. L06/223 | 1 |
| 82***12 | Pin, Lynch | 2 |
A3-44-2 Fork Manure, Spring Tines
| 54***02 | Boss | 9 |
| 54***04 | Nut | 9 |
| 81***02 | Plate, Data | 1 |
A3-27-1 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A3-11-1 Fork, Manure, Silage, With Parallel Push Off
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Fork, Manure C/W Push Off, 2160mm Wide 1.50cu.M | 1 |
A3-4-9 Locking Pin Kit, Hydraulic, Q-Fit Carriage Option
| 13***4Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
B Bodywork, Cab, Loader End
B1-9-5 Counterweight
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***9Z | Bolt, M20 X 90 | 1 |
| 13***2Z | Nut, Thin M20 | 1 |
B1-5-3 Cover,, Engine 'Plastic'
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***3Z | Screw, M6x16 | 8 |
| 13***3Z | Screw, M8 X 16 | 6 |
B1-9-1 Bodywork, Rear End
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
B1-4-5 Mirror/Light, Chassis Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
B1-3-1 Fenders, 4 Wheel Steer
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Screw, M8 X 16 | 8 |
B1-10-1 Light, Extension, Rear
| 12***02 | Plate, Compression | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
B1-12-1 Mirror, Tow Hitch, Metal Bonnet
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***2Z | Washer | 2 |
B1-5-2 Cover, Engine
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B1-2-1 Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***1Z | Nut | 4 |
B1-4-6 Mirror Assembly, Quickhitch,, Plastic B0nnet
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 12***74 | Glass, Convex Mirror | 1 |
B1-2-2 Chassis, Extended, >M279289
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***1Z | Nut | 4 |
B1-13-1 Mounting,, Chock
| 12***01 | Strap | 2 |
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
B1-5-1 Cover, Engine
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***3Z | Screw, M6x16 | 8 |
| 13***3Z | Screw, M8 X 16 | 6 |
B1-10-2 Light, Extension, Rear
| 16***45 | G.A. | 1 |
| 16***13 | Light, Rear Moulding | 2 |
B1-1-1 Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***1Z | Nut | 4 |
B1-3-2 Fenders,, 4 Wheel Steer, Ext Chassis 526s
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3Z | Screw, M6x16 | 2 |
B1-6-1 Tank, Hydraulic, & Battery Box
| 12***86 | Cover, Plate | 1 |
| 12***00 | Filter, Hydraulic Assembly, 5 Micron; Replaced By 27***00, See San07947 | 1 |
| 13***5Z | Bolt | 4 |
B1-9-2 Bodywork,Rear End
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
B1-4-1 Fenders, 2 Wheel Steer
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Screw, M8 X 16 | 8 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
B1-7-1 Tank, Diesel Fuel
| 12***86 | Catch, Vandal Cover | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***4Z | Screw | 6 |
B2-1-1 Cab Glazing
| 16***70 | Glass, Hinged Rear Window, Clear | 1 |
| 16***71 | Glass, Hinged Rear Window, Tinted | 1 |
| 16***72 | Stay, Window, C/W Release Pin | 1 |
B2-5-2 Cab Frame,, Mounting
| 12***02 | Plate, Compression | 4 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***2Z | Bolt, M16 X 120 | 2 |
B2-12-1 Fire Extinguisher
| 14***03 | Screw | 2 |
| 16***78 | G.A. | 1 |
| 16***83 | Extinguisher, Fire | 1 |
B2-8-1 Suspension Unit, Seat
| 19***00 | Unit, Suspension Assembly | 1 |
| 19***01 | Unit, Suspension | 1 |
| 19***02 | Kit-Weight Adjuster | 1 |
B2-5-1 Cab Frame, Mounting
| 12***02 | Plate, Compression | 4 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***2Z | Bolt, M16 X 120 | 2 |
B2-10-1 Guard, Windscreen
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***2Z | Nut, M8 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B2-7-1 Seat Belt
| 13***2Z | Nut | 2 |
| 40***00 | Belt, Safety, Seat | 1 |
B2-4-2 Cab, Extended Chassis, >M279289
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 1 |
| 12***02 | Handle, Left Hand | 1 |
B2-4-1 Cab
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 1 |
| 12***02 | Handle, Left Hand | 1 |
B2-14-1 Cab Cover
| 99***00 | Cover, Cab | 1 |
B2-9-1 Seat
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B2-3-1 Cab Glazing, Safety Frame
| 16***24 | G.A. | 1 |
| 16***60 | Cab, Frame | 1 |
| 82***94 | Glass, R.H. Side, Clear | 1 |
B2-9-5 Seat
| 16***61 | G.A. | 1 |
| 40***03 | Kit-Seat Foam | 1 |
| 40***04 | Kit-Back Foam | 1 |
B2-2-1 Panel, Instrument, Covers & Brackets
| 14***06 | Screw | 4 |
| 16***48 | G.A. | 1 |
| 16***76 | G.A. | 1 |
B3-4-1 Indicator, Boom Angle
| 14***4Z | Washer, Spring | 2 |
| 14***9Z | Washer | 1 |
| 15***00 | Plate, Back | 1 |
B3-2-1 Boom
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-5-1 Safety Strut
| 12***00 | Strap | 1 |
| 12***71 | Stop | 2 |
| 12***35 | Mounting, Strut | 2 |
B3-7-2 Boom,Pivot Pin, Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-10-1 Boom, Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***95 | G.A. | 1 |
B3-2-3 Boom,520 4ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-11-1 Boom, Pivot Pin Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-9-2 Boom,Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***82 | G.A. | 1 |
B3-2-2 Boom, 526 & 526s, Extended Chassis
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-3-1 Pads,Boom Wear&Shims, Nylacast
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 6 |
| 13***8Z | Bolt, M10 X 30mm Tuf-Lok | 10 |
| 13***9Z | Bolt, M10x35 Long,Tuf-Lok | 4 |
B3-11-3 Boom,Pivot Pin, Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 8 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-7-1 Boom, Pivot Pin Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-10-2 Boom Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***95 | G.A. | 1 |
B3-9-1 Boom, Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***82 | G.A. | 1 |
B3-11-2 Boom,Pivot Pin, Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-1-1 Boom
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B5-1-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-3-4 Decals
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-3-5 Decals
| 16***44 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***21 | G.A. | 1 |
B5-5-8 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***75 | Hinge, Ring, Flip Charts | 2 |
B5-7-1 Decals, Seat Belt Warning
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
B5-5-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***75 | Hinge, Ring, Flip Charts | 2 |
B5-2-5 Tool Kit
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
| 82***21 | Spanner, Adjustable, 10in. | 1 |
B5-3-3 Decals
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-2-1 Tool Kit
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
| 82***21 | Spanner, Adjustable, 10in. | 1 |
B5-4-1 Paint
| 42***01 | Thinners, 5 Litres | 0 |
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
B5-6-1 Decals, German
| 16***45 | G.A. | 1 |
| 81***05 | Plate, Load Data, T.U.V | 1 |
| 81***59 | Label, Marker | 2 |
B5-5-5 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***21 | G.A. | 1 |
B5-3-1 Decals
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-8-1 Boom Marker Decals
| 16***46 | G.A. | 1 |
| 81***48 | Decal, Boom Extension, >0.5; San25288.81***48 Cwe To 81***97.25/9/07, P Gamble L06/239 | 1 |
| 81***49 | Decal, Boom Extension, 1>; San25288.Cwe To 81***98.P Gamble.25/9/07, Pi L06/239 | 1 |
B6-1-1 Homologation Parts, German
| 12***01 | Strap | 1 |
| 12***00 | Strap | 4 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 7 |
C Electrics-Machine, Cab & Engine
C1-10-1 Light, Rear
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***03 | Screw, Self Tapping | 2 |
C1-15-1 Horn, Single Tone
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***1Z | Washer | 1 |
C1-6-1 Fusible Link Box, Assembly
| 16***38 | G.A. | 1 |
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***30 | Fuse, 30 Amp | 2 |
C1-16-1 Alarm, Reverse
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-18-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
| 72***01 | Connector, 2 Way Female Socket | 5 |
C1-5-1 Trailer Electrics
| 13***3Z | Nut | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
| 14***2Z | Washer, M20 | 3 |
C1-9-1 Light, Indicator, Front, German
| 15***00 | G.A. | 1 |
| 15***01 | Bracket, Side Repeater L.H. | 1 |
| 15***02 | Bracket, Side Repeater R.H. | 1 |
C1-13-1 Light, Front
| 13***05 | Capscrew, M8 X 20 | 12 |
| 13***7Z | Capscrew, M8x25mm | 12 |
| 14***7Z | Washer, Spring | 8 |
C1-2-1 Aircon, Electrics
| 16***38 | G.A. | 1 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 15 |
| 70***52 | Decal, Heater Fan Blower | 1 |
C1-14-1 Light, Number Plate
| 16***31 | G.A. | 1 |
| 16***66 | Bracket, Mounting | 1 |
| 16***49 | Bracket, Mounting | 1 |
C1-8-1 Indicator, Safe Load
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw, No 8x1/2" | 2 |
C1-4-1 Isolator, Battery
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***3Z | Nut | 2 |
C1-11-1 Light, Reversing
| 16***45 | G.A. | 1 |
| 16***91 | Bracket, Mounting | 1 |
| 70***00 | Light, Reversing | 1 |
C1-6-2 Fusible Link Box, Assy
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***40 | Fuse, 40 Amp | 3 |
| 71***00 | Box, Fuse Link 5 Way | 1 |
C1-3-1 Battery & Components
| 10***00 | Clamp | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***1Z | Nut | 2 |
C1-19-1 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
| 71***01 | Plug, Harness Blanking, 2-Way, Sealed | 0 |
C1-1-5 Harness
| 70***00 | Switch, Proximity; Replaced By 70***75, See San 10336 | 1 |
| 70***00 | Push Button Black, No Microswitch | 1 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
C2-4-2 Alternator Mountings, Optional, 85amp
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-3-1 Alternator
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
C2-1-1 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Temperature | 1 |
C2-3-3 Alternator, 85amp
| 71***00 | Alternator, 85amp | 1 |
| 71***01 | Cover, Assembly | 1 |
| 71***02 | Regulator | 1 |
C2-3-2 Alternator, Sealed, A127m-55amp 12.Volt, Optional
| 70***00 | Tape, Self-Amalgamating | 0 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***00 | Alternator, 12volt-55amp Sealed | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-1-2 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Temperature | 1 |
C3-15-5 Light, Beacon, Hazard Warning
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C3-6-1 Fixings, Cab
| 13***3Z | Nut | 8 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 24 |
C3-4-1 Switches, Electrical
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 1 |
| 70***05 | Insert, Trailer Lights | 1 |
C3-14-2 Gauge,Inclinometer
| 16***95 | Cab, Inclinometer, Assembly | 1 |
| 70***00 | Gauge, Inclinometer/Level | 1 |
C3-20-1 Air Conditioning, Assembly
| 16***75 | G.A. | 1 |
| 16***32 | Knob, Control | 1 |
| 26***77 | Filter, Recirc. | 1 |
C3-20-2 Heater Assembly, Air Conditioning
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 22***05 | Clip, Jubilee | 2 |
| 30***00 | Unit, Air Con/Heater Assembly | 1 |
C3-7-2 Fuse Box & Relays
| 16***92 | Bracket, Relay Mounting | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 4 |
C3-16-1 Switch, Column,, Manual Gearbox
| 13***3Z | Capscrew | 2 |
| 70***02 | Switch, Right Hand Handle | 1 |
| 70***00 | Switch, Column,Standard, Without Cover; Replaced By 70***43, See San 10543 | 1 |
C3-4-2 Switches, Electrical
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 1 |
| 70***05 | Insert, Trailer Lights | 1 |
C3-2-1 Motor, Wiper, Roof Window
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***03 | Cover | 1 |
C3-10-1 Instrument Cluster, 33 Kph
| 16***01 | Gearbox, Ga + Inst Cluster | 1 |
| 70***00 | Cluster, Instrument, 33 K.P.H. | 1 |
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
C3-3-1 Motor, Wiper, Rear Window
| 14***02 | Screw | 1 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-4-5 Switches, Electrical
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 2 |
| 70***05 | Insert, Trailer Lights | 1 |
C3-19-3 Receiver Drier, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***3Z | Nut | 2 |
C3-9-1 Light, Working, Cab Mounted
| 16***94 | G.A. | 1 |
| 70***00 | Light, Auxiliary, Rh | 1 |
| 70***00 | Light, Auxiliary, Lh, Light, Auxiliary, Lh; See Note 1. Remove Blanking Grommet 83***20 | 1 |
C3-7-1 Fuse Box & Relays
| 16***92 | Bracket, Relay Mounting | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 4 |
C3-17-1 Heater Assembly
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 16***16 | Heater, Assembly Unit | 1 |
| 22***05 | Clip, Jubilee | 2 |
C3-1-1 Motor, Wiper, Windscreen
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***88 | G.A. | 1 |
| 25***03 | Jet, Screen Washer | 1 |
C3-15-1 Light, Beacon, Hazard Warning
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Yellow | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
C3-6-5 Fixings, Cab
| 13***3Z | Nut | 8 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 24 |
C3-17-2 Heater Assembly
| 16***71 | Heater, Assembly Unit, Heater, Assembly Unit; See Note 1. Heater Is Interchangeable With 16***16 From Serial No 27***00 Onwards By Removing Item 25 | 1 |
| 22***05 | Clip, Jubilee | 2 |
| 99***01 | Filter, Pad Foam | 1 |
C3-13-1 Light, Interior, Cab
| 16***75 | G.A. | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-19-2 Condensor, Installation
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
C3-5-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt, M10 X 16 | 1 |
C3-14-1 Guage, Level
| 16***95 | Cab, Inclinometer, Assembly | 1 |
| 70***00 | Guage, Inclinometer/Level | 1 |
| 71***00 | Harness | 1 |
C3-18-1 Fan, Cab Cooling, Optional
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 16***57 | G.A. | 1 |
C3-19-1 Air Conditioning Kit
| 13***3Z | Screw, M6x16 | 1 |
| 14***1Z | Washer | 1 |
| 16***56 | G.A. | 1 |
C3-11-1 Instrument Cluster, 20 Kph, France
| 16***02 | Gearbox, Ga + Inst Cluster | 1 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C3-8-2 Radio,Optional
| 15***84 | Channel, Pvc,Rear Wiper Harne, Ss | 1 |
| 16***93 | G.A., Radio Installation | 1 |
| 16***06 | Trim, Ceiling | 1 |
C3-12-1 Instrument Cluster, 21 Kph, German
| 16***00 | Gearbox, Ga + Inst Cluster | 1 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C3-8-1 Radio, Optional
| 15***84 | Channel, Pvc,Rear Wiper Harne, Ss | 1 |
| 16***93 | G.A., Radio Installation | 1 |
| 16***06 | Trim, Ceiling | 1 |
D Controls-Machine, Engine & Steering
D1-1-1 Control, Lever, Manual, 2/4wd
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 12***04 | Knob | 1 |
| 13***0Z | Bolt | 1 |
D1-3-1 Control Lever, Steer Selection
| 16***58 | Lever, & Cable Assembly | 1 |
| 99***85 | Handle, Assembly | 1 |
| 99***86 | Kit, Cable To Handle Assembly, Fixing | 1 |
D1-1-2 Control,Lever, Manual 2/4wd, For Jcb Axles
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 12***04 | Knob | 1 |
| 12***7P | Bracket, 2wd/4wd Cable, Control | 1 |
D1-6-1 Control, Levers, Valve, With Full Lever Lock
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
D1-4-2 Gear Lever, 526 & 526s, From M279289
| 13***0Z | Bolt | 1 |
| 13***2Z | Nut, Lock | 1 |
| 16***90 | Knob, 'Screw On' | 1 |
D1-7-1 Control, Levers, Valve, With Tilt Lever Lock
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
D1-9-1 Lever Lock, Valve Controls
| 13***2Z | Nut, Thin M20 | 0 |
| 14***2Z | Washer, M20 | 0 |
| 16***47 | Boss, Locking | 0 |
D1-8-1 Control, Levers, Valve
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
D1-4-1 Gear Lever
| 13***0Z | Bolt | 1 |
| 13***2Z | Nut, Lock | 2 |
| 16***48 | G.A. | 1 |
D1-2-1 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***2Z | Nut | 2 |
D2-1-1 Control, Throttle
| 12***63 | Bracket, Throttle Reaction | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***2Z | Bolt | 2 |
E Hydraulics & Air Including, Steering
E1-8-1 Circuit, Boom Auxiliary, With Mechcanical Tow Hitch
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 16***08 | G.A. | 1 |
E1-1-1 Circuit, Neutral
| 16***53 | G.A. | 1 |
| 16***77 | G.A. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 5 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-1-5 Circuit, Neutral
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-6-1 Circuit, Lift & Extend
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 24***07 | O Ring | 4 |
E1-7-1 Circuit, Boom Auxiliary
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***08 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-3-1 Circuit, Auxiliary, Boom End Options
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt | 2 |
| 14***11 | Seal, Bonded | 2 |
E1-6-5 Circuit, Lift & Extend
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 24***07 | O Ring | 4 |
E1-1-6 Circuit,Neutral, Extended Chassis, >M279289
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-2-5 Circuit, Neutral, Hot Climate
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-9-1 Circuit, Boom Hose Clamping
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 13 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-2-1 Circuit, Neutral, Hot Climate
| 16***53 | G.A. | 1 |
| 16***42 | G.A. | 1 |
| 16***77 | G.A. | 1 |
E1-5-5 Circuit, Tilt
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-5-1 Circuit, Tilt
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-1-7 Circuit,Neutral
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-4-1 Circuit, Boom Auxiliary, With Rear Hydraulic Tow Hitch
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***08 | G.A. | 1 |
E2-1-1 Pump, Main Hydraulic, Installation
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***7Z | Capscrew, M8x25mm | 4 |
| 13***6Z | Capscrew, M8 X 70mm Long | 1 |
E2-2-1 Pump, Main Hydraulic
| 02***35 | Gasket | 1 |
| 02***33 | Bolt | 5 |
| 02***37 | Bolt | 1 |
E3-5-2 Valve, Diverter
| 25***00 | Valve, Diverter, 12 Volt; Superceded 25/97***00 See Ti 5/080 | 0 |
| 25***01 | Coil, 12v | 1 |
E3-2-1 Valve, Components
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 2 |
| 25***31 | Spacer | 1 |
E3-20-1 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***01 | Element, Air - Primary | 1 |
E3-3-1 Valve, Adapters
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
E3-5-1 Valve, Diverter
| 25***00 | Valve, Diverter, 12 Volt; Superceded 25/97***00 See Ti 5/080 | 0 |
E3-4-5 Valve, Steering
| 35***02 | Kit-Repair | 1 |
| 35***00 | Steering Ospc 160, With Shock Valve | 1 |
| 35***01 | Kit, Repair | 1 |
E3-7-1 Valve, Brake Charge
| 15***00 | Valve, Charge; Superseded By 92***88 D.Jackson 07/03/07, San23427 (James Coleman Request At Parker) | 1 |
| 15***01 | Kit-Seal, Including Filter; See Memo.24/7/06.Nla.Only Parker Can Service, The Valve.P Gamble.Ref J Coleman Parker. | 1 |
E3-6-1 Filter, Hydraulic
| 12***00 | Filter, Hydraulic Assembly, 5 Micron; Replaced By 27***00, See San07947 | 1 |
| 24***24 | O Ring | 1 |
| 32***00 | Element, Hydraulic; Replaced By 32/91***00, See San07902 | 1 |
E3-4-1 Valve, Steering
| 16***34 | G.A. | 1 |
| 16***35 | G.A. | 1 |
| 16***44 | G.A. | 1 |
E3-1-1 Valve, Assembly
| 16***62 | Valve, Assembly | 1 |
| 25***00 | Valve, Assembly 4 Spool; Same As 25/97***00 But Supplier Issue, Raised Their Drg.See Pi L96/151 | 1 |
| 25***09 | Washer | 2 |
E3-3-5 Valve, Adapters
| 14***08 | Seal, Washer | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
E4-6-2 Ram,Tilt, 'Black'Bearings
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 16***79 | Spacer | 2 |
E4-19-1 Ram,Multi-Shovel
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-15-1 Ram, Manure Fork, With Push Off
| 98***01 | Ram, Assembly | 1 |
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
E4-1-1 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***08 | Pipe | 1 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
E4-17-1 Ram, Tow Hitch,Oleo.
| 16***62 | Ram, Hydraulic Tow Hitch; See San 12977. Superseded To 55***18. | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-12-1 Ram, Log Grab, Manure Silage Fork, Fixed & Sliding & Flat 8 Bale Grab
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-6-1 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 23***08 | O Ring | 1 |
E4-17-2 Ram, Tow Hitch Oleo, 526s 24"Wheels Only
| 16***08 | Ram, Hydraulic Tow Hitch | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-14-2 Ram, Multi Hitch
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
| 99***00 | Ram, Assembly, 76mm Cyl. Bore (3") | 1 |
E4-8-1 Ram, Extension
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***85 | Shim, 0.5mm Thick | 0 |
E4-7-2 Ram,Tilt, 'Black Bearings'
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 23***09 | O Ring | 1 |
E4-13-1 Ram, Strimech, Heston Bale Grab &, Wrapped Bale Clamp
| 54***10 | Nut | 1 |
| 54***12 | Piston | 1 |
| 54***14 | Bearing, Gland | 1 |
E4-14-1 Ram, Multi Hitch
| 99***00 | Ram, Complete, Strimech | 2 |
| 99***01 | Cylinder | 1 |
| 99***02 | Ring, Back Up | 1 |
E4-4-2 Ram, Displacement
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
E4-11-1 Ram, Tow Hitch
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-16-1 Ram, Carriage, Sideshift
| 54***01 | Ram, Sideshift Carriage | 1 |
| 54***02 | Kit-Seal, Sideshift Carriage, Ram | 1 |
| 54***03 | Cylinder | 1 |
E4-7-1 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 23***09 | O Ring | 1 |
E4-12-2 Ram,, Manure Fork,
| 90***22 | Body, Cylinder | 1 |
| 90***23 | Rod, Piston | 1 |
| 90***24 | Piston | 1 |
E4-18-1 Ram,Box Tipper
| 98***30 | Cylinder, Hydraulic | 1 |
| 98***45 | Locknut | 1 |
| 98***46 | Seal, Piston Head; Will Be Provided As A Part Of Seal Kit, 98***54.See San 09107.Ref L Collins/Strimec | 1 |
F Axles, Wheels & Transmission
F1-6-3 Dropbox (526 & 520), J.C.B.Permanent 4wd, 1.545 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-12-1 Wheel Hub, Salvage/Retro Fit, Scheme
| 99***00 | Hub, Wheel Front Rh Assembly, 526 Salvage Kit; Superseded To 99***00 For M/C'S To M279288, & 99***00 For M/C'S From M279289 San 08330 | 1 |
| 99***00 | Hub, Wheel Front Lh Assembly, 526 Salvage Kit; Superseded To 99***00 For M/C'S To M279288, & 99***00 For M/C'S From M279289 San08330 | 1 |
| 99***00 | Hub, Wheel Rear Lh Assembly, 526 Salvage Kit; Superseded To 99***00 For M/C'S To M279288, & 99***00 For M/C'S From M279289 San08330 | 1 |
F1-3-2 Ram Steering,, Front Axle,Install, Extended Chassis
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-8-1 Axles, Rigid Pad Mntd Jcb, 2ws 2/4 Disc 16.17 : 1
| 13***3Z | Bolt, M12 X 55 | 4 |
| 13***16 | Bolt, M16x70l | 28 |
| 44***00 | Gearbox, Dropbox | 1 |
F1-1-5 Axle Assembly,Front, 520-55 & 520-55fs
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***1Z | Nut, M24 | 4 |
| 14***4Z | Washer | 8 |
F1-7-1 Dropbox (520), Jcb Permanent 4wd, Ratio 1.179 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-6-4 Dropbox (526 & 520), J.C.B 2/4wd Disc, Ratio 1.545 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-10-1 Axle Drive Head,, Rigid Axle, Ratio 1.9375 : 1
| 13***07 | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F1-9-1 Axle Arm & Wheel Hub, Pad Mounted, G.A.
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-5-2 Shaft, Drive, 526-55,526 & 526s
| 91***07 | Kit-Spider | 2 |
| 91***02 | Shaft, Hub Side; 91***01 + 82***94 | 1 |
| 91***02 | Yoke, Double | 1 |
F1-1-2 Axle Assembly,, Front, 520-55,520-55fs.
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***1Z | Nut, M24 | 4 |
| 14***4Z | Washer | 8 |
F1-5-4 Differential, Components Lsd
| 44***08 | Pin, Trunnion | 1 |
| 44***03 | Plate, Pressure | 2 |
| 44***04 | Plate, Friction | 8 |
F1-1-4 Axle Assembly, Ext Chassis
| 10***01 | Nut | 10 |
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***07 | Bolt, M16 X 25 | 1 |
F1-4-2 Axle Drive Head, Steering Axle, L.S.D.
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***02 | Sleeve, Splined | 1 |
F1-3-1 Ram, Steering, Front Axle, Installation
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 16 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-5-3 Shaft,Drive, 520
| 91***07 | Kit-Spider | 2 |
| 91***02 | Shaft, Hub Side; 91***01 + 82***94 | 1 |
| 91***02 | Yoke, Double | 1 |
F1-6-1 Dropbox (526 & 520), 2/4wd J.C.B., Ratio 1.179 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-7-3 Dropbox (520), Permanent 4wd J.C.B., Ratio 1.545 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-1-3 Axle Assembly,, Front, Ext Chassis >M279289
| 10***01 | Nut | 10 |
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***07 | Bolt, M16 X 25 | 1 |
F1-7-2 Dropbox (520), Jcb 2/4wd Disc, Ratio 1.79 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-9-2 Axle Arm & Wheel Hub, Pad Mtd
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-4-1 Axle Drive Head,, Steering Axle
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***02 | Sleeve, Splined | 1 |
F1-8-2 Axles, Rigid Pad Mntd Jcb, 12.34 : 1
| 13***3Z | Bolt, M12 X 55 | 4 |
| 13***16 | Bolt, M16x70l | 28 |
| 44***00 | Gearbox, Dropbox | 1 |
F1-1-1 Axle Assembly,, Front
| 10***01 | Nut | 10 |
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***07 | Bolt, M16 X 25 | 1 |
F1-6-2 Dropbox (526 & 520), J.C.B. Permanent 4wd, Ratio 1.179 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-5-1 Differential, Components
| 13***8Z | Bolt, M8x80mm Long | 8 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Gear Kit | 1 |
F1-30-1 Replacement Hub Kits
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
| 22***45 | Circlip | 2 |
F1-7-4 Dropbox (520), J.C.B. 2/4wd Disc, Ratio 1.79 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-2-1 Hub & Components, Steering Axle
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
F2-1-2 Axle Assembly,, Rear, Ext Chassis
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-1-1 Axle Assembly, Rear
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-4-2 Hub & Components, Braked Axle
| 13***7Z | Bolt, Coated | 2 |
| 13***03 | Screw, Set | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-5-1 Ram, Steering, Rear Axle 4ws, Installation
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-8-2 Axle Assembly,, Rear 2ws, 520
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-2-1 Differential, Assembly
| 13***8Z | Bolt, M8x80mm Long | 8 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-7-1 Shaft, Drive, Non-Braked Axle
| 91***01 | Shaft, Hub Side, 244.5mm Long; Replaced By Mss 91***01 + 82***94, See San08824 | 1 |
| 91***07 | Kit-Spider | 1 |
| 91***00 | Shaft, Drive, Btb 320 | 1 |
F2-8-1 Axle Assembly, Rear, 520 4ws
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-30-1 Replacement Hub Kits, "See Ti 5/210"
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
| 22***45 | Circlip | 2 |
F2-6-2 Shaft,Drive,, Braked Axle,, 520 & 504 4ws
| 91***07 | Kit-Spider | 2 |
| 91***02 | Shaft, Hub Side; 91***01 + 82***94 | 1 |
| 91***03 | Nipple, Grease | 1 |
F2-9-1 Ram,Steering,, Rear Axle,520 2ws, Installation
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-4-1 Hub & Components, Braked Axle
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
F2-6-1 Shaft, Drive, Braked Axle
| 91***02 | Kit-Spider | 2 |
| 91***04 | Joint, Double Yoke | 1 |
| 91***00 | Shaft, Drive; Superseded By 91***40 & 82***94.San 13925, Refer T Boothroyd. | 2 |
F2-3-1 Hub & Components, Non-Braked Axle
| 10***01 | Nut | 20 |
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F3-6-2 Propshafts
| 11***25 | Strap | 6 |
| 16***76 | G.A., Driveshaft Kit, 526-55 Ext/Chassis | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F3-1-20 Drive Shaft, Universal, Joints (Spider Kits)
| 91***02 | Kit-Spider | 1 |
| 91***03 | Kit-Spider, 82mm Over Caps, 27mm Dia. | 1 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 1 |
F3-3-1 Wheels & Tyres
| 10***01 | Nut | 20 |
| 15***01 | Valve | 1 |
| 16***08 | Wheel, & Tyre, Michelin, 405/70 R20 M27 | 4 |
F3-3-2 Wheels &, Tyres, Extended Chassis
| 10***01 | Nut | 20 |
| 15***01 | Valve | 1 |
| 16***66 | Wheel, & Tyre Assembly.Traction, 17.5lr X 24 | 4 |
F3-6-1 Propshafts
| 11***25 | Strap | 6 |
| 16***07 | G.A. | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F3-5-1 Propshafts
| 16***29 | G.A. | 1 |
| 16***30 | G.A. | 1 |
| 16***25 | G.A. | 1 |
F3-1-1 Wheels & Tyres, For Jcb Axles
| 15***01 | Valve | 1 |
| 16***16 | Wheel, & Tyre. Michelin, 375/75 R20 Xm27 | 4 |
| 16***17 | Wheel, & Tyre. Continental, 14.5-20 10ply Mpt | 4 |
F3-2-1 Wheels & Tires
| 15***01 | Valve | 1 |
| 16***03 | Wheel, & Tyre, Michelin, 375/75 R20 Xm27 | 4 |
| 16***06 | Wheel, & Tyre, Goodyear, 12.5-18 10ply | 4 |
F5-5-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F5-3-1 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-1-2 Transmission, Jcb Syncro Shuttle
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-2-1 Transmission, Jcb Syncro Shuttle, Components
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F5-4-1 Gear Change
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
| 44***00 | Lever, Assembly | 1 |
F5-1-1 Transmission, Jcb Syncro Shuttle
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-7-1 Cooler, Oil, & Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
| 16***60 | G.A. | 1 |
F5-6-1 Transmission, Mounting
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***9Z | Bolt, M12x90mm | 2 |
G Brakes
G1-2-1 Brake Pedal, & Master Cylinder, Installation, 4ws
| 12***01 | Filter | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
G1-8-2 Brake Pedal,, Master Cylinder &, Vent 4ws
| 13***4Z | Bolt | 1 |
| 13***8Z | Bolt, M10 X 30 | 3 |
| 13***1Z | Bolt | 1 |
G1-7-2 Brake System,, Chassis,4ws, 526s & 526 Ext Chassis
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Nut | 4 |
G1-8-1 Brake Pedal,Master, Cylinder & Vent 4ws
| 13***4Z | Bolt | 1 |
| 13***8Z | Bolt, M10 X 30 | 3 |
| 13***1Z | Bolt | 1 |
G1-3-1 Brake System,, Chassis,2 W/S.
| 16***03 | Pipe, Brake L/H. | 1 |
| 16***04 | Pipe, Brake R/H. | 1 |
| 64***00 | Hose, Brake | 2 |
G1-5-1 Brake, Components
G1-4-1 Brake System, Chassis, 4ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 1 |
| 13***2Z | Nut | 1 |
G1-7-1 Brake System, Chassis, 4ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 1 |
| 13***2Z | Nut | 1 |
G1-2-2 Brake Pedal, &, Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
G1-1-2 Brake Pedal, & Master Cylinder, Installation, 2ws
| 12***01 | Plate, Lock | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
G1-4-2 Brake System,, Chassis, 4ws, 520
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Nut | 4 |
G1-6-1 Brake, Components
G1-5-2 Brake Components,, Front Axle
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
H Steering
H1-3-1 Hose & Pipework, Steering 2ws
| 16***79 | G.A. | 1 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***03 | Adapter | 2 |
H1-2-3 Hose & Pipework,, Steering 4ws, For Air Con
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 14***11 | Seal, Bonded | 2 |
H1-1-1 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
H1-4-1 Hose & Pipework, Steering 4ws
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
H1-2-2 Hose & Pipework, Steering 4ws, Jcb Axles.
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 14***11 | Seal, Bonded | 2 |
H1-2-1 Hose & Pipework, Steering 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
N Engine
N1-3-4 Block Assembly, Ab Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N1-1-5 Engine, Complete, Ab Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 106bhp | 1 |
N1-3-5 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
N1-5-3 Fans, Pulleys, & Fan Belt, Aa Build
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
N1-5-4 Fans, Pulleys, & Fan Belt, Ab Build
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***81 | Belt, Fan, Pair | 1 |
N1-7-1 Flywheel, Aa & Ab Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
N1-6-3 Timing Case, Camshaft & Gears, Aa & Ab Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
N1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***00 | Bracket, Engine Mounting, Left Hand | 1 |
N1-3-3 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-1-4 Engine, Complete, Ab Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 90bhp | 1 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete, 1004-4, Naturally Aspirated | 1 |
N1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ab Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N1-1-2 Engine, Complete, Ab Build
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 106bhp | 1 |
N1-1-3 Engine, Complete, Aa Build
| 01***00 | Engine, Complete, 1004-4, Nat/Aspirated | 1 |
N1-2-2 Engine, Short, Ab Build
| 02***46 | Engine, Short, 1004-4t, Turbocharged | 1 |
N2-3-2 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
N2-1-2 Cylinder Head, Ab Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-4-1 Lifting Plates, Engine, Aa & Ab Builds
| 02***13 | Plate, Lifting | 1 |
| 02***31 | Plate, Lifting | 1 |
| 02***36 | Plate, Lifting | 1 |
N2-2-2 Rocker Assembly, Push Rods & Tappets, Aa & Ab Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N3-4-3 Silencer, Aa Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 2 |
N3-3-1 Filter, Air, Aa Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***69 | Spacer | 1 |
N3-4-1 Silencer, Aa Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
N3-3-2 Filter, Air, Ab Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***69 | Spacer | 1 |
N3-4-2 Silencer, Ab Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
N3-1-2 Manifold, Induction, Ab Build
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
| 02***09 | Gasket | 1 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N3-2-2 Manifold, Exhaust, Ab Build
| 02***50 | Gasket | 2 |
| 02***22 | Gasket | 1 |
| 02***76 | Manifold, Exhaust | 1 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***03 | Stud | 3 |
N3-4-6 Silencer, Ab Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
N3-4-4 Silencer, Ab Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 5 |
N4-3-1 Radiator, Fittings & Mountings, Aa Build
| 12***81 | Cowling, Fan | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 12 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
N4-4-1 Radiator & Hoses, Aa Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-4-3 Radiator & Hoses, Ab Build
| 12***01 | Strap | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa & Ab Builds
| 02***95 | Plug, Taper | 1 |
| 02***92 | Thermostat | 1 |
| 02***46 | Plug | 1 |
N4-1-1 Pump, Water, Aa & Ab Builds
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
| 02***84 | Seal | 1 |
N4-4-2 Radiator & Hoses, Hot Climate
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-2 Radiator, Fittings & Mountings, Ab Build
| 12***81 | Cowling, Fan | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 12 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
N5-3-1 Piston Cooling Jets, Ab Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
N5-5-2 Cooler, Oil, Filter & Pipework, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N5-1-1 Sump, Oil, Aa & Ab Builds
| 02***26 | Spacer | 1 |
| 02***73 | Gasket | 1 |
| 02***82 | Plug, Oil Drain | 2 |
N5-4-1 Filter, Oil, Aa Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
| 02***96 | Gasket | 2 |
N5-2-2 Pump, Oil, & Relief Valve, Ab Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N6-6-1 Filter, Fuel Sediment, Aa & Ab Builds
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***06 | Filter, Swirl Cone | 1 |
N6-5-1 Fuel Heater, & Fuel Feed Pipe, Aa Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
N6-2-4 Injectors, Fuel, & Injection Pipes, Ab Build, 90bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-7-3 Filter, Fuel, Aa & Ab Builds
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-2-2 Injectors, Fuel, & Injection Pipes, Ab Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 1 |
N6-3-1 Fuel Pipes, Injection Pump, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N6-2-5 Injectors, Fuel, & Injection Pipes, Alternative, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-1-2 Pump, Fuel Injection, Ab Build, 106bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-2-3 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-3-2 Fuel Pipes, Injection Pump, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 4 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-1-3 Pump, Fuel Injection, Ab Build 90bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-8-2 Pump, Fuel Lift, Aa & Ab Builds
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-5-2 Fuel Heater, & Fuel Feed Pipe, Ab Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
N7-1-1 Turbocharger, Ab Build
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-1-2 Turbocharger, Ab Build
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***60 | Turbocharger | 1 |
N7-5-1 Compressor 12.Volt, Air Conditioning
| 01***04 | Belt, Drive | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***8Z | Bolt, M8x80mm Long | 1 |
N7-7-3 Heater, Engine Block
| 12***64 | Clamp, Block Heater | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
N7-2-1 Turbocharger, Pipework & Mounting, Ab Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
N8-2-2 Kit, Engine Overhaul, Ab Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-2-1 Kit, Engine Overhaul, Aa Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-1-1 Gasket Sets, Aa & Ab Build
| 02***74 | Kit-Gasket, Top | 1 |
| 02***77 | Kit-Gasket, Bottom | 1 |
526S serial number reference
For JCB 526S Loadall/Telehandler models, the machine identification plate is typically located on the chassis or cab frame, often near the cab step or boom-pivot area. The serial number is also stamped into the chassis frame as a backup. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 279289 | JCB 526S (Long Wheelbase) starting serial number for 24-inch wheel compatibility. | Verified in service manual documentation for 520/the OEM part reference Loadall series (1993-2004). Specific to the Long Wheelbase configuration introduced for 24-inch wheel compatibility. |
| 1182000–1326999 | JCB 526S (Construction) covered by service manual the OEM part reference. | Verified in service manual the OEM part reference. Applies to 526, 526S, 528-70, and 528S Loadall models. Note: This range covers multiple model variants; verify specific configuration against the machine identification plate. |
| 00281663–00289999 | JCB 526S LE Telescopic Handler (Loadall) covered by parts catalogue manual. | Verified in JCB 526S LE Telescopic Handlers Parts Catalogue. Specific to the LE (Long Reach) variant. |
| 01150000–01151999 | JCB 526S LE Telescopic Handler (Loadall) covered by parts catalogue manual. | Verified in JCB 526S LE Telescopic Handlers Parts Catalogue. Specific to the LE (Long Reach) variant. |
Frequently asked questions
What engine does the JCB 526S use?
The JCB 526S uses a Perkins 4-cylinder turbocharged engine producing 106 hp.
What is the operating weight of the JCB 526S?
The operating weight is approximately 5.84 tons.
What model replaced the JCB 526S?
The JCB 526-56 succeeded the 526S.
What 526S owners discuss
What are the known powertrain and transmission behaviors for the JCB 526S?
The machine uses a Syncro Shuttle transmission with a torque converter and a 4-speed synchromesh gearbox. Owners report that the transmission may slip when warm. The engine is a Perkins 4-cylinder turbocharged unit producing 106 hp. Some units experienced sluggish performance caused by a small filter or gauze on the outlet pipe inside the fuel tank, which requires removing the plate with six bolts to clean. Turbo pressures can also swell the fuel tank, restricting throttle pedal travel. The machine features permanent 4-wheel drive with a 17.5 R 24 tire size.
What hydraulic system quirks and valve block issues are common on this model?
The hydraulic system operates at 3500 psi (75 ltm). A known issue involves the single joystick valve block letting oil bypass itself, which pushes out the extend ram or third service circuit, preventing retraction. This is not an electrical fault. Additionally, poppet valve seals in the spool block may fail, requiring replacement of seals and bushes on the boom. JCB has been noted to supply incorrect O-rings for these poppet seals.
What undercarriage, linkage, and wear patterns are typical for the JCB 526S?
The tilt linkage at the front of the boom wears badly and becomes loose regardless of lubrication. The crowd/tip linkage is a significant wear point; replacement parts for pins, bushes, and seals can cost over £1,000, excluding machining costs for the boom and headstock. The tool carrier system is considered less robust than the Q-fit system in the long run. Older models with inboard brakes in the axle casing are preferred over hub-mounted brakes, which are prone to leaks and are less robust.
What engine quirks are associated with the Perkins engine in the 526S?
Early Perkins engines in this range were susceptible to timing gear problems, though most have been rectified in later units. The engine can be dour when cold but performs well otherwise. Some owners describe the JCB-branded engine as good but thirsty. The fuel tank is located on the right-hand side for the 526S, distinct from models with tanks under the cab.
What are the common electrical and sensor issues reported?
Electrical reliability is a noted concern for this range. Common issues include blowing fuses when moving forward or attempting to move, often linked to hydraulic fuse blowing and transmission control failures. Steering solenoids can fail, particularly on joystick-controlled models, sometimes requiring the machine to be dragged out of tight spaces. Owners of older lever-control models note fewer electrical issues compared to later joystick versions.
What should be checked when buying a used JCB 526S?
Check for hub leaks and transmission slippage when warm. Inspect the brake accumulators; if they fail, the pump will load and unload every few seconds when warm. Verify the condition of the crowd/tip linkage and boom wear pads. Check for the small filter/gauze on the fuel tank outlet pipe if sluggishness is reported. Confirm the hitching system (Q-fit vs. pin and cone) and ensure compatibility with existing attachments. Verify the brake fluid type; using car brake fluid instead of JCB light hydraulic fluid (LHM) causes severe brake issues.
What safety-critical fixes require dealer verification?
Brake accumulator pressure and integrity are safety-critical. Have your dealer verify the accumulator gas charge pressure and replace if goosed or leaking, as they store pressurized oil for brake function after engine stall. Verify the correct brake fluid type (JCB light hydraulic fluid/LHM) to prevent system failure.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 526S. Related factory variants of the same model family:
526S526S
Need a specific 526S part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.