JCBagriculturaltelescopic handlers (loadall)
Jcb 526-55 FS
Maintenance schedule, common problems & OEM parts breakdown
The JCB 526-55 FS is a 2.6-tonne capacity telescopic handler produced from 1996 to 2004. It features a 5.5-meter lift height and an operating weight of approximately 5.66 tonnes. The machine is powered by a Perkins 1000 series diesel engine, specifically the Type AA or AB build for earlier serials and Type AR or AK for later low-emission variants. It is available in Farm Special and Construction configurations, with options for Rear Steering (RS) or All Wheel Steering (AWS). The 526-55 succeeded the original 526 model and was later replaced by the 526-55 S series. Configurations include dual lever or single lever control options and various transmission types such as Synchro Shuttle or Powershift.
Across its production life, the 526-55 evolved from the original 526 with a stronger inner boom to handle increased engine power. Later models introduced low-emission engines and updated electrical systems with ECU gear control. The machine remains significant in the used market due to its robust Perkins engine and simple hydraulic architecture, which facilitate easy repair. Parts availability is high, with numerous third-party seal kits and service manuals supporting the platform. The 526-55 FS specifically denotes the Farm Special configuration, often featuring agricultural attachments and specific cab options.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 526-55 FS specifications
Engine
| Model | Perkins (Type AA and AB engine builds for early serials; Type AR and AK low-emission builds for later serials) |
| Gross/Net Power | Not documented for this exact serial range — verify with your dealer |
| Displacement | Not documented for this exact serial range — verify with your dealer |
| Cylinders | 4 |
| Emissions Tier | Tier 2 / Stage II (early builds); Tier 3 / Stage IIIA (low-emission AR/AK builds) |
Weights
| Operating Weight | 5.66 t (12,478 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 4.52 m (14 ft 10 in) |
| Transport Width | 2.39 m (7 ft 10 in) |
| Transport Height | 2.39 m (7 ft 10 in) |
| Wheelbase | Not documented for this exact serial range — verify with your dealer |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speeds | Not documented for this exact serial range — verify with your dealer |
| Lift Height | 5.54 m (18 ft 2 in) |
| Rated Operating Capacity | 2.6 t (5,732 lb) at center of gravity; 1 t (2,205 lb) at full forward reach |
Service capacities (summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
526-55 FS fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 11.1 L (2.9 US gal) | JCB 10W/30 Multigrade (–10 °C to 50 °C / 14 °F to 122 °F); JCB 15W/40 Multigrade (–15 °C to 30 °C / 5 °F to 86 °F) |
| Cooling System | 9.35 L (2.45 US gal) | 55% Antifreeze mixture (Freeze protection to –36 °C / –33 °F) |
| Fuel Tank | 120 L (31.7 US gal) | Diesel Oil |
| Transmission (Synchro Shuttle) | 24 L (6.3 US gal) | JCB Super Universal Agricultural |
| Transmission (Powershift) | 24 L (6.3 US gal) | JCB Super Universal Agricultural |
| Front Axle | 11.5 L (3.0 US gal) | JCB Super Universal Agricultural |
| Rear Axle | 11.5 L (3.0 US gal) | JCB Super Universal Agricultural |
| Front Hub | 1.5 L (0.4 US gal) | JCB Super Universal Agricultural |
| Rear Hub | 1.5 L (0.4 US gal) | JCB Super Universal Agricultural |
| Hydraulic System | 120 L (31.7 US gal) | JCB Hydraulic Oil |
| Grease | N/A | JCB MPL Grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 526-55 FS maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 526-55 FS beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor hydraulic oil condition every 500 hours to prevent pump wear. Check transmission fluid for metal particles at 2000 hours. Analyze engine oil for soot and fuel dilution at each 250-hour change. Inspect coolant concentration annually to prevent corrosion in the Perkins 1000 engine block. Track grease consumption on boom pivot points to identify seal failure early. Use JCB specified fluids to maintain hydraulic system integrity.
Corrective & Common Repairs
Replace hydraulic cylinder seals on the displacement ram and boom lift rams when leaks occur. Repair or replace the synchro shuttle transmission reverser unit if shifting becomes difficult. Fix fuel system air leaks at the lift pump gauze and sediment bowl. Replace worn brake linings on the oil-immersed brakes. Repair the engine air filter pre-cleaner if clogged. Address electrical faults in the Safe Load Indicator system by checking transducer connections.
Overhaul & Rebuild Points
Rebuild the Perkins 1000 engine at 10,000 hours or when compression drops. Overhaul the main hydraulic pump if flow or pressure falls below spec. Rebuild the Powershift transmission torque converter if slippage occurs. Replace boom wear pads when thickness is reduced. Inspect the drop box gears for wear during axle service. Rebuild the steering hydraulic unit if neutral drift is present.
Seasonal & Environment Servicing
Check antifreeze protection before winter to prevent block freezing. Inspect the cab heater filter for airflow restriction. Grease pivot points more frequently in dusty conditions. Clean the radiator and cooler fins to prevent overheating in hot climates. Check tire pressure for temperature changes. Inspect the battery for corrosion in humid environments. Ensure the fuel sediment bowl is drained regularly in wet conditions.
526-55 FS common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/903001 | Element, Air - Primary | Air intake service | Check fitment → |
| 32/903002 | Element, Air - Safety | Air intake service | Check fitment → |
| 02/100073 | Element, Oil Filter, Canister Type - Long | Lubrication service | Check fitment → |
| 02/100284 | Element, Oil Filter, Canister Type-Short | Lubrication service | Check fitment → |
| 126/78200 | Filter, Hydraulic Assembly, 5 Micron | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
526-55 FS fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 203 EN TMP | Engine Temperature High | Low coolant level, faulty thermostat, or blocked radiator. | Check coolant level and inspect for leaks. Verify thermostat operation. |
| 218 HYD PMP | Hydraulic Pump Pressure Fault | Low hydraulic oil, worn pump, or relief valve malfunction. | Check hydraulic oil level and condition. Inspect pump drive and relief valves. |
| 300 EC1 CAN | CAN Bus Communication Error | Loose wiring, corroded connector, or ECU communication fault. | Inspect wiring harnesses and connectors for damage or corrosion. Check ground connections. |
| P0100 | Mass Air Flow (MAF) Sensor Circuit Malfunction | Dirty or failed MAF sensor, or intake air leak. | Clean or replace the MAF sensor. Check for intake air leaks. |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Failed crankshaft position sensor or damaged wiring. | Inspect sensor and wiring. Replace sensor if necessary. |
| P0321-87 | CAN Bus Message Error for Engine Speed | Intermittent communication loss between engine ECU and machine controller. | Check CAN bus wiring integrity and connector security. |
| P0336 | Crank Sensor Signal Fault | Faulty crankshaft position sensor or signal wheel issue. | Inspect crankshaft position sensor and signal wheel for damage. |
| P029B | Injector Drift Fault on Injector 2 | Fuel injector 2 drift or electrical issue. | Test injector 2 resistance and operation. Check wiring harness. |
| P0340 | Camshaft Position Sensor Circuit Limit | Faulty camshaft position sensor or timing issue. | Inspect camshaft position sensor and wiring. Verify engine timing. |
| P0101 | MAF Sensor Performance | MAF sensor reading out of range or dirty. | Clean MAF sensor. Replace if cleaning does not resolve the fault. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
526-55 FS attachments & work tools
Agricultural & Material Handling
Includes grain buckets (3,000 and 5,000 litre capacities), manure forks, silage forks, bale forks, pallet forks, and grain pushers. These tools utilize the JCB Q-FIT quick-attach system for rapid coupling and decoupling.
Bale Handling
Integrated-frame bale spears are available for round and rectangular bales, including single 55 mm spears (3,000 lbs rating), dual forged spears (3,800 lbs rating), and triple forged spears (3,000 lbs rating). These mount directly to the JCB Q-FIT interface.
Coupling System
The machine utilizes the JCB Q-FIT quick-attach system for work tool mounting. This system allows for standardized attachment interchangeability across the telehandler family without requiring manual pinning for every tool.
Hydraulic Configuration
The displacement/compensating cylinder for the boom system uses a 40 mm rod and 70 mm bore. This hydraulic arrangement supports the lifting and leveling functions required for the listed attachment families.
Lifting Capacity
The machine has a nominal load capacity of 2.6 tons at the center of gravity and 1 ton at full forward reach. The maximum lifting height is 5.54 meters (18 ft 2 in).
Machine Dimensions
The standard operating length is 14 ft 10 in (0.25 m) and the operating width is 7 ft 10 in (0.25 m). These dimensions vary depending on the specific boom configuration and attached work tools.
Serial Applicability
The 526-55 model data applies to serial numbers the OEM part reference through the OEM part reference. The FS variant shares this data range with the base 526-55 model.
All 526-55 FS assemblies by section
Every catalogued assembly group for the Jcb 526-55 FS. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-6-1 Shovel, Clam, 4 In 1
| 51***02 | Kit-Nut & Bolt, M20 | 14 |
| 51***06 | Kit-Nut & Bolt, M16 | 14 |
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
A1-14-1 Bucket, Grain
| 54***00 | Bucket, Grain, 70cu Ft | 1 |
A1-6-2 Shovel,, Clam,6 In 1,, 2260 Wide.
| 12***23 | Bush | 2 |
| 12***00 | Jaw, Clamshovel | 1 |
| 13***6Z | Bolt | 2 |
A1-5-1 Bucket, Root Crop
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
| 82***15 | Screw | 4 |
A1-2-1 Tooth Guard
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***6Z | Bolt, M12 X 70mm | 2 |
| 13***1Z | Nut | 2 |
A1-12-1 Shovel, 1.25 Cu. Yds, 8' Wide
| 13***1Z | Nut | 12 |
| 14***1Z | Washer, M16 Plain | 12 |
| 54***76 | Shovel, 8' Wide, 1.25cu. Yds | 1 |
A1-11-2 Shovel,0.9cu.M.,, 2286mm (7'6")Wide
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 1 |
| 13***01 | Nut | 16 |
A1-4-1 Bucket, Rehandling
| 51***02 | Kit-Nut & Bolt, M20 | 14 |
| 51***06 | Kit-Nut & Bolt, M16 | 14 |
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
A1-13-1 Shovel, 1.2cu.M., 2286mm (7'6") Wide
| 13***18 | Bolt | 2 |
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
A1-3-1 Bucket, Grain, Potato
| 98***00 | Shovel, Grain/Potato 1.38 M., 2110mm Wide | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A1-1-1 Shovel, 0.9cu.M.
| 13***1Z | Nut | 16 |
| 13***1Z | Nut | 12 |
| 14***2Z | Washer, M20 | 12 |
A1-10-1 Tooth Guard
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt, 1/2" X 2.1/4" Long | 2 |
A1-11-1 Shovel, 1.0cu.M., 2235mm (7'4") Wide
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A3-31-1 Wrapped Bale Clamp
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
| 13***3Z | Nut, M20 | 3 |
A3-23-1 Flat 8 Bale Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-1-5 Fork Frame, Forks & Load Guard
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***9Z | Bolt, M12x90mm | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
A3-11-1 Fork, Manure, Silage, With Parallel Push Off
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Fork, Manure C/W Push Off, 2160mm Wide 1.50cu.M | 1 |
A3-21-1 Fork Frames & Forks, Industrial
| 54***17 | Fork, Frame 1370mm Wide | 1 |
| 54***37 | G.A. | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-14-1 Heston Bale Grab
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Clamp, Heston Bale Grab | 1 |
A3-4-7 Guard, Load, 'Q'Fit Carriage
| 54***00 | G.A. | 1 |
| 54***00 | Guard, Load; San 23375.Mss To 33***49 & 83***67.28/2/7, P Gamble. L06/223 | 1 |
| 82***12 | Pin, Lynch | 2 |
A3-6-5 Tow Hitch, Hydraulic, Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut | 4 |
A3-12-1 Fork, Manure, Silage, With Top Grab, & Parallel Push Off
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Fork, Manure, Silage, Push Off & Top Grab | 1 |
A3-17-1 Fork, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 81***68 | Plate, Rating | 1 |
A3-15-1 Fork, Round Bale
| 54***03 | Fork, Tine, Long | 4 |
| 81***15 | Plate, Operator Instruction, Norwegian | 4 |
| 81***68 | Plate, Rating | 1 |
A3-42-1 Fork, Manure, Silage, With Parallel Push Off
| 98***01 | Ram, Assembly | 2 |
| 98***00 | Fork, Manure & Push Off | 1 |
| 98***01 | Fork, Tine; Same As 54***03 See San 08844. San Done Due, To Strimech Information To M Roberts(Attach) | 9 |
A3-28-1 Sweeper Collector, Mounting Frame
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A3-27-1 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A3-46-1 Bucket, Rehandling
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Slurry/Rehandling | 1 |
A3-25-2 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A3-22-1 Man Platform, Uk & Spain Only
| 15***00 | Pin | 2 |
| 81***84 | Decal, Warning, Platform Securing | 1 |
| 81***21 | Decal, Jcb Platform | 1 |
A3-10-2 Muck Fork, & Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-6-1 Tow Hitch, Hydraulic, Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut | 4 |
A3-5-2 Tow Hitch,, Hydraulic 526s Only, 24" Wheels Only
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
A3-47-1 Box Tipper,Sideways
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-41-1 Fork, Manure, Silage, With Top Grab, & Parallel Push Off
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-23-2 Big Bale Grab
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 1 |
| 54***07 | Kit-Seal | 1 |
| 98***00 | Grab, Bale | 1 |
A3-19-1 Tow Hitch, Manual, Installation
| 10***03 | Wire, Retaining | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-13-1 Grab, Log, Fixed Forks, 2 To 3 Ton
| 54***03 | Grab, Arm | 2 |
| 54***04 | Pin, Pivot | 2 |
| 54***05 | Pin, Pivot | 2 |
A3-48-1 Multi Bucket
| 33***06 | Toeplate 7ft Multi | 1 |
| 33***14 | Toeplate, Reversible | 1 |
| 90***00 | Ram, Assembly, 2.3/8" X 8" | 1 |
A3-10-3 Muck Fork
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-16-1 Jib, 4 Metre, Extension, 350kg
| 53***01 | Link, 1.25 Ton | 1 |
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
A3-21-8 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-49-1 Multi-Shovel
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 8 |
A3-19-5 Tow Hitch, Manual, Installation
| 10***03 | Wire, Retaining | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-4-5 Quickhitch, Carriage
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-4-1 Quickhitch, Tool Carrier
| 15***01 | Ring, Key 38mm Diameter, Approx | 1 |
| 16***07 | Wire, Rope, 650mm Long | 1 |
| 54***04 | Lug | 2 |
A3-30-1 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-7-1 Crane, Fork Mounted
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 1 |
A3-25-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
A3-44-2 Fork Manure, Spring Tines
| 54***02 | Boss | 9 |
| 54***04 | Nut | 9 |
| 81***02 | Plate, Data | 1 |
A3-4-9 Locking Pin Kit, Hydraulic, Q-Fit Carriage Option
| 13***4Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
A3-43-1 Fork, Manure, Silage, With Top Grab, 2.29m Wide X 1.9cu.M
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-29-1 Silashear
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-3-1 Quickhitch, Carriage
| 15***01 | Ring, Key 38mm Diameter, Approx | 1 |
| 16***45 | G.A. | 1 |
| 16***02 | G.A. | 1 |
A3-40-1 Kits
| 54***30 | Fork, Frame & Side Shift, Complete | 1 |
| 98***00 | Carriage, Sideshift Assembly | 1 |
| 98***00 | Attachment, Sweeper Collector, Kit | 1 |
A3-21-5 Carriage, Fork, Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-2-5 Quickhitch, Hydraulic Installation
| 14***11 | Seal, Bonded | 3 |
| 16***02 | Adapter, 1/4" Bsp M/M | 3 |
| 54***04 | Lug | 2 |
A3-45-1 Bucket, Grain, Potato
| 98***01 | Toeplate, Weld On | 1 |
| 98***00 | Bucket, Grain & Potato | 1 |
A3-5-1 Tow Hitch, Hydraulic
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
A3-18-1 Guard, Load, 'Q'Fit Carriage
| 54***19 | G.A. | 1 |
| 54***71 | Guard, Q-Fit | 1 |
| 82***03 | Grommet | 4 |
A3-32-1 Quickhitch, Hydraulic
| 13***0Z | Capscrew | 6 |
| 24***21 | O Ring | 2 |
| 24***02 | Seal, Gland | 2 |
A3-4-8 Installation, Hydraulic Pin Lock, Quickfit Carriage
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***2Z | Screw, M6 X 50 | 1 |
A3-8-1 Concrete Skip
| 11***00 | Pin, Lynch, With Chain | 1 |
| 54***00 | Skip, Assembly | 1 |
| 54***01 | Spring, Shuttle | 2 |
A3-10-1 Fork, Manure, Silage, With Top Grab, 2.29m Wide X 1.9cu.M
| 54***04 | Bolt, Nut | 4 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-21-10 Bucket, Multi
| 98***01 | Bucket | 1 |
| 98***20 | Ram, Assembly (12" X 3"), (Kv Tine) | 1 |
A3-9-1 Fork, Manure, Silage
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
| 54***04 | Nut | 9 |
A3-33-1 Quickhitch, Hydraulic Installation
| 14***11 | Seal, Bonded | 3 |
| 16***02 | Adapter, 1/4" Bsp M/M | 3 |
| 54***04 | Lug | 2 |
A3-26-1 Sweeper Collector, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-44-1 Fork, Manure, Silage
| 54***01 | Frame | 1 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-24-1 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter | 2 |
A3-2-1 Quickhitch, Hydraulic
| 13***0Z | Capscrew, M12x40 | 6 |
| 16***03 | G.A. | 1 |
| 24***21 | O Ring | 2 |
A3-1-1 Fork Frame, Forks & Load Guard
| 13***8Z | Bolt, M10x80 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
B Bodywork, Cab, Loader End
B1-9-2 Bodywork,Rear End
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
B1-3-1 Fenders, 4 Wheel Steer
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Screw, M8 X 16 | 8 |
B1-10-2 Light, Extension, Rear
| 16***45 | G.A. | 1 |
| 16***13 | Light, Rear Moulding | 2 |
B1-13-1 Mounting,, Chock
| 12***01 | Strap | 2 |
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
B1-2-1 Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***1Z | Nut | 4 |
B1-4-6 Mirror Assembly, Quickhitch,, Plastic B0nnet
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 12***74 | Glass, Convex Mirror | 1 |
B1-9-5 Counterweight
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***9Z | Bolt, M20 X 90 | 1 |
| 13***2Z | Nut, Thin M20 | 1 |
B1-5-2 Cover, Engine
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B1-4-1 Fenders, 2 Wheel Steer
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Screw, M8 X 16 | 8 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
B1-6-1 Tank, Hydraulic, & Battery Box
| 12***86 | Cover, Plate | 1 |
| 12***00 | Filter, Hydraulic Assembly, 5 Micron; Replaced By 27***00, See San07947 | 1 |
| 13***5Z | Bolt | 4 |
B1-2-2 Chassis, Extended, >M279289
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***1Z | Nut | 4 |
B1-10-1 Light, Extension, Rear
| 12***02 | Plate, Compression | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
B1-3-2 Fenders,, 4 Wheel Steer, Ext Chassis 526s
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3Z | Screw, M6x16 | 2 |
B1-5-1 Cover, Engine
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***3Z | Screw, M6x16 | 8 |
| 13***3Z | Screw, M8 X 16 | 6 |
B1-1-1 Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***1Z | Nut | 4 |
B1-12-1 Mirror, Tow Hitch, Metal Bonnet
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***2Z | Washer | 2 |
B1-7-1 Tank, Diesel Fuel
| 12***86 | Catch, Vandal Cover | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***4Z | Screw | 6 |
B1-5-3 Cover,, Engine 'Plastic'
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***3Z | Screw, M6x16 | 8 |
| 13***3Z | Screw, M8 X 16 | 6 |
B1-9-1 Bodywork, Rear End
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
B1-4-5 Mirror/Light, Chassis Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
B2-9-1 Seat
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B2-2-1 Panel, Instrument, Covers & Brackets
| 14***06 | Screw | 4 |
| 16***48 | G.A. | 1 |
| 16***76 | G.A. | 1 |
B2-4-2 Cab, Extended Chassis, >M279289
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 1 |
| 12***02 | Handle, Left Hand | 1 |
B2-1-1 Cab Glazing
| 16***70 | Glass, Hinged Rear Window, Clear | 1 |
| 16***71 | Glass, Hinged Rear Window, Tinted | 1 |
| 16***72 | Stay, Window, C/W Release Pin | 1 |
B2-5-1 Cab Frame, Mounting
| 12***02 | Plate, Compression | 4 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***2Z | Bolt, M16 X 120 | 2 |
B2-5-2 Cab Frame,, Mounting
| 12***02 | Plate, Compression | 4 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***2Z | Bolt, M16 X 120 | 2 |
B2-10-1 Guard, Windscreen
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***2Z | Nut, M8 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B2-3-1 Cab Glazing, Safety Frame
| 16***24 | G.A. | 1 |
| 16***60 | Cab, Frame | 1 |
| 82***94 | Glass, R.H. Side, Clear | 1 |
B2-4-1 Cab
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 1 |
| 12***02 | Handle, Left Hand | 1 |
B2-12-1 Fire Extinguisher
| 14***03 | Screw | 2 |
| 16***78 | G.A. | 1 |
| 16***83 | Extinguisher, Fire | 1 |
B2-14-1 Cab Cover
| 99***00 | Cover, Cab | 1 |
B2-8-1 Suspension Unit, Seat
| 19***00 | Unit, Suspension Assembly | 1 |
| 19***01 | Unit, Suspension | 1 |
| 19***02 | Kit-Weight Adjuster | 1 |
B2-9-5 Seat
| 16***61 | G.A. | 1 |
| 40***03 | Kit-Seat Foam | 1 |
| 40***04 | Kit-Back Foam | 1 |
B2-7-1 Seat Belt
| 13***2Z | Nut | 2 |
| 40***00 | Belt, Safety, Seat | 1 |
B3-2-2 Boom, 526 & 526s, Extended Chassis
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-11-2 Boom,Pivot Pin, Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-10-1 Boom, Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***95 | G.A. | 1 |
B3-9-1 Boom, Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***82 | G.A. | 1 |
B3-10-2 Boom Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***95 | G.A. | 1 |
B3-11-3 Boom,Pivot Pin, Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 8 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-9-2 Boom,Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***82 | G.A. | 1 |
B3-3-1 Pads,Boom Wear&Shims, Nylacast
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 6 |
| 13***8Z | Bolt, M10 X 30mm Tuf-Lok | 10 |
| 13***9Z | Bolt, M10x35 Long,Tuf-Lok | 4 |
B3-2-3 Boom,520 4ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-2-1 Boom
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-11-1 Boom, Pivot Pin Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-5-1 Safety Strut
| 12***00 | Strap | 1 |
| 12***71 | Stop | 2 |
| 12***35 | Mounting, Strut | 2 |
B3-1-1 Boom
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-4-1 Indicator, Boom Angle
| 14***4Z | Washer, Spring | 2 |
| 14***9Z | Washer | 1 |
| 15***00 | Plate, Back | 1 |
B3-7-1 Boom, Pivot Pin Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-7-2 Boom,Pivot Pin, Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
B5-8-1 Boom Marker Decals
| 16***46 | G.A. | 1 |
| 81***48 | Decal, Boom Extension, >0.5; San25288.81***48 Cwe To 81***97.25/9/07, P Gamble L06/239 | 1 |
| 81***49 | Decal, Boom Extension, 1>; San25288.Cwe To 81***98.P Gamble.25/9/07, Pi L06/239 | 1 |
B5-5-8 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***75 | Hinge, Ring, Flip Charts | 2 |
B5-2-1 Tool Kit
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
| 82***21 | Spanner, Adjustable, 10in. | 1 |
B5-3-3 Decals
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-1-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-6-1 Decals, German
| 16***45 | G.A. | 1 |
| 81***05 | Plate, Load Data, T.U.V | 1 |
| 81***59 | Label, Marker | 2 |
B5-7-1 Decals, Seat Belt Warning
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
B5-4-1 Paint
| 42***01 | Thinners, 5 Litres | 0 |
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
B5-3-4 Decals
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-3-5 Decals
| 16***44 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***21 | G.A. | 1 |
B5-3-1 Decals
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-2-5 Tool Kit
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
| 82***21 | Spanner, Adjustable, 10in. | 1 |
B5-5-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***75 | Hinge, Ring, Flip Charts | 2 |
B5-5-5 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***21 | G.A. | 1 |
B6-1-1 Homologation Parts, German
| 12***01 | Strap | 1 |
| 12***00 | Strap | 4 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 7 |
C Electrics-Machine, Cab & Engine
C1-6-2 Fusible Link Box, Assy
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***40 | Fuse, 40 Amp | 3 |
| 71***00 | Box, Fuse Link 5 Way | 1 |
C1-10-1 Light, Rear
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***03 | Screw, Self Tapping | 2 |
C1-3-1 Battery & Components
| 10***00 | Clamp | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***1Z | Nut | 2 |
C1-18-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
| 72***01 | Connector, 2 Way Female Socket | 5 |
C1-1-5 Harness
| 70***00 | Switch, Proximity; Replaced By 70***75, See San 10336 | 1 |
| 70***00 | Push Button Black, No Microswitch | 1 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
C1-6-1 Fusible Link Box, Assembly
| 16***38 | G.A. | 1 |
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***30 | Fuse, 30 Amp | 2 |
C1-16-1 Alarm, Reverse
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-9-1 Light, Indicator, Front, German
| 15***00 | G.A. | 1 |
| 15***01 | Bracket, Side Repeater L.H. | 1 |
| 15***02 | Bracket, Side Repeater R.H. | 1 |
C1-14-1 Light, Number Plate
| 16***31 | G.A. | 1 |
| 16***66 | Bracket, Mounting | 1 |
| 16***49 | Bracket, Mounting | 1 |
C1-13-1 Light, Front
| 13***05 | Capscrew, M8 X 20 | 12 |
| 13***7Z | Capscrew, M8x25mm | 12 |
| 14***7Z | Washer, Spring | 8 |
C1-15-1 Horn, Single Tone
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***1Z | Washer | 1 |
C1-2-1 Aircon, Electrics
| 16***38 | G.A. | 1 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 15 |
| 70***52 | Decal, Heater Fan Blower | 1 |
C1-19-1 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
| 71***01 | Plug, Harness Blanking, 2-Way, Sealed | 0 |
C1-11-1 Light, Reversing
| 16***45 | G.A. | 1 |
| 16***91 | Bracket, Mounting | 1 |
| 70***00 | Light, Reversing | 1 |
C1-4-1 Isolator, Battery
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***3Z | Nut | 2 |
C1-8-1 Indicator, Safe Load
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw, No 8x1/2" | 2 |
C1-5-1 Trailer Electrics
| 13***3Z | Nut | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
| 14***2Z | Washer, M20 | 3 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-4-2 Alternator Mountings, Optional, 85amp
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-1-2 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Temperature | 1 |
C2-3-2 Alternator, Sealed, A127m-55amp 12.Volt, Optional
| 70***00 | Tape, Self-Amalgamating | 0 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***00 | Alternator, 12volt-55amp Sealed | 1 |
C2-3-3 Alternator, 85amp
| 71***00 | Alternator, 85amp | 1 |
| 71***01 | Cover, Assembly | 1 |
| 71***02 | Regulator | 1 |
C2-1-1 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Temperature | 1 |
C2-3-1 Alternator
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
C3-14-1 Guage, Level
| 16***95 | Cab, Inclinometer, Assembly | 1 |
| 70***00 | Guage, Inclinometer/Level | 1 |
| 71***00 | Harness | 1 |
C3-7-1 Fuse Box & Relays
| 16***92 | Bracket, Relay Mounting | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 4 |
C3-19-3 Receiver Drier, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***3Z | Nut | 2 |
C3-4-2 Switches, Electrical
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 1 |
| 70***05 | Insert, Trailer Lights | 1 |
C3-7-2 Fuse Box & Relays
| 16***92 | Bracket, Relay Mounting | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 4 |
C3-19-1 Air Conditioning Kit
| 13***3Z | Screw, M6x16 | 1 |
| 14***1Z | Washer | 1 |
| 16***56 | G.A. | 1 |
C3-10-1 Instrument Cluster, 33 Kph
| 16***01 | Gearbox, Ga + Inst Cluster | 1 |
| 70***00 | Cluster, Instrument, 33 K.P.H. | 1 |
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
C3-17-2 Heater Assembly
| 16***71 | Heater, Assembly Unit, Heater, Assembly Unit; See Note 1. Heater Is Interchangeable With 16***16 From Serial No 27***00 Onwards By Removing Item 25 | 1 |
| 22***05 | Clip, Jubilee | 2 |
| 99***01 | Filter, Pad Foam | 1 |
C3-2-1 Motor, Wiper, Roof Window
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***03 | Cover | 1 |
C3-20-2 Heater Assembly, Air Conditioning
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 22***05 | Clip, Jubilee | 2 |
| 30***00 | Unit, Air Con/Heater Assembly | 1 |
C3-4-5 Switches, Electrical
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 2 |
| 70***05 | Insert, Trailer Lights | 1 |
C3-18-1 Fan, Cab Cooling, Optional
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 16***57 | G.A. | 1 |
C3-15-5 Light, Beacon, Hazard Warning
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C3-11-1 Instrument Cluster, 20 Kph, France
| 16***02 | Gearbox, Ga + Inst Cluster | 1 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C3-8-2 Radio,Optional
| 15***84 | Channel, Pvc,Rear Wiper Harne, Ss | 1 |
| 16***93 | G.A., Radio Installation | 1 |
| 16***06 | Trim, Ceiling | 1 |
C3-5-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt, M10 X 16 | 1 |
C3-13-1 Light, Interior, Cab
| 16***75 | G.A. | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-12-1 Instrument Cluster, 21 Kph, German
| 16***00 | Gearbox, Ga + Inst Cluster | 1 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C3-6-1 Fixings, Cab
| 13***3Z | Nut | 8 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 24 |
C3-17-1 Heater Assembly
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 16***16 | Heater, Assembly Unit | 1 |
| 22***05 | Clip, Jubilee | 2 |
C3-6-5 Fixings, Cab
| 13***3Z | Nut | 8 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 24 |
C3-14-2 Gauge,Inclinometer
| 16***95 | Cab, Inclinometer, Assembly | 1 |
| 70***00 | Gauge, Inclinometer/Level | 1 |
C3-3-1 Motor, Wiper, Rear Window
| 14***02 | Screw | 1 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-20-1 Air Conditioning, Assembly
| 16***75 | G.A. | 1 |
| 16***32 | Knob, Control | 1 |
| 26***77 | Filter, Recirc. | 1 |
C3-19-2 Condensor, Installation
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
C3-8-1 Radio, Optional
| 15***84 | Channel, Pvc,Rear Wiper Harne, Ss | 1 |
| 16***93 | G.A., Radio Installation | 1 |
| 16***06 | Trim, Ceiling | 1 |
C3-9-1 Light, Working, Cab Mounted
| 16***94 | G.A. | 1 |
| 70***00 | Light, Auxiliary, Rh | 1 |
| 70***00 | Light, Auxiliary, Lh, Light, Auxiliary, Lh; See Note 1. Remove Blanking Grommet 83***20 | 1 |
C3-15-1 Light, Beacon, Hazard Warning
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Yellow | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
C3-16-1 Switch, Column,, Manual Gearbox
| 13***3Z | Capscrew | 2 |
| 70***02 | Switch, Right Hand Handle | 1 |
| 70***00 | Switch, Column,Standard, Without Cover; Replaced By 70***43, See San 10543 | 1 |
C3-4-1 Switches, Electrical
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 1 |
| 70***05 | Insert, Trailer Lights | 1 |
C3-1-1 Motor, Wiper, Windscreen
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***88 | G.A. | 1 |
| 25***03 | Jet, Screen Washer | 1 |
D Controls-Machine, Engine & Steering
D1-4-2 Gear Lever, 526 & 526s, From M279289
| 13***0Z | Bolt | 1 |
| 13***2Z | Nut, Lock | 1 |
| 16***90 | Knob, 'Screw On' | 1 |
D1-4-1 Gear Lever
| 13***0Z | Bolt | 1 |
| 13***2Z | Nut, Lock | 2 |
| 16***48 | G.A. | 1 |
D1-7-1 Control, Levers, Valve, With Tilt Lever Lock
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
D1-9-1 Lever Lock, Valve Controls
| 13***2Z | Nut, Thin M20 | 0 |
| 14***2Z | Washer, M20 | 0 |
| 16***47 | Boss, Locking | 0 |
D1-8-1 Control, Levers, Valve
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
D1-1-2 Control,Lever, Manual 2/4wd, For Jcb Axles
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 12***04 | Knob | 1 |
| 12***7P | Bracket, 2wd/4wd Cable, Control | 1 |
D1-1-1 Control, Lever, Manual, 2/4wd
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 12***04 | Knob | 1 |
| 13***0Z | Bolt | 1 |
D1-2-1 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***2Z | Nut | 2 |
D1-3-1 Control Lever, Steer Selection
| 16***58 | Lever, & Cable Assembly | 1 |
| 99***85 | Handle, Assembly | 1 |
| 99***86 | Kit, Cable To Handle Assembly, Fixing | 1 |
D1-6-1 Control, Levers, Valve, With Full Lever Lock
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
D2-1-1 Control, Throttle
| 12***63 | Bracket, Throttle Reaction | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***2Z | Bolt | 2 |
E Hydraulics & Air Including, Steering
E1-5-5 Circuit, Tilt
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-6-5 Circuit, Lift & Extend
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 24***07 | O Ring | 4 |
E1-2-5 Circuit, Neutral, Hot Climate
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-9-1 Circuit, Boom Hose Clamping
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 13 |
E1-2-1 Circuit, Neutral, Hot Climate
| 16***53 | G.A. | 1 |
| 16***42 | G.A. | 1 |
| 16***77 | G.A. | 1 |
E1-1-6 Circuit,Neutral, Extended Chassis, >M279289
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-1-1 Circuit, Neutral
| 16***53 | G.A. | 1 |
| 16***77 | G.A. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 5 |
E1-8-1 Circuit, Boom Auxiliary, With Mechcanical Tow Hitch
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 16***08 | G.A. | 1 |
E1-1-5 Circuit, Neutral
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-5-1 Circuit, Tilt
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-4-1 Circuit, Boom Auxiliary, With Rear Hydraulic Tow Hitch
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***08 | G.A. | 1 |
E1-6-1 Circuit, Lift & Extend
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 24***07 | O Ring | 4 |
E1-3-1 Circuit, Auxiliary, Boom End Options
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt | 2 |
| 14***11 | Seal, Bonded | 2 |
E1-1-7 Circuit,Neutral
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-7-1 Circuit, Boom Auxiliary
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***08 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E2-1-1 Pump, Main Hydraulic, Installation
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***7Z | Capscrew, M8x25mm | 4 |
| 13***6Z | Capscrew, M8 X 70mm Long | 1 |
E2-2-1 Pump, Main Hydraulic
| 02***35 | Gasket | 1 |
| 02***33 | Bolt | 5 |
| 02***37 | Bolt | 1 |
E3-1-1 Valve, Assembly
| 16***62 | Valve, Assembly | 1 |
| 25***00 | Valve, Assembly 4 Spool; Same As 25/97***00 But Supplier Issue, Raised Their Drg.See Pi L96/151 | 1 |
| 25***09 | Washer | 2 |
E3-2-1 Valve, Components
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 2 |
| 25***31 | Spacer | 1 |
E3-4-5 Valve, Steering
| 35***02 | Kit-Repair | 1 |
| 35***00 | Steering Ospc 160, With Shock Valve | 1 |
| 35***01 | Kit, Repair | 1 |
E3-4-1 Valve, Steering
| 16***34 | G.A. | 1 |
| 16***35 | G.A. | 1 |
| 16***44 | G.A. | 1 |
E3-3-5 Valve, Adapters
| 14***08 | Seal, Washer | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
E3-7-1 Valve, Brake Charge
| 15***00 | Valve, Charge; Superseded By 92***88 D.Jackson 07/03/07, San23427 (James Coleman Request At Parker) | 1 |
| 15***01 | Kit-Seal, Including Filter; See Memo.24/7/06.Nla.Only Parker Can Service, The Valve.P Gamble.Ref J Coleman Parker. | 1 |
E3-6-1 Filter, Hydraulic
| 12***00 | Filter, Hydraulic Assembly, 5 Micron; Replaced By 27***00, See San07947 | 1 |
| 24***24 | O Ring | 1 |
| 32***00 | Element, Hydraulic; Replaced By 32/91***00, See San07902 | 1 |
E3-5-1 Valve, Diverter
| 25***00 | Valve, Diverter, 12 Volt; Superceded 25/97***00 See Ti 5/080 | 0 |
E3-5-2 Valve, Diverter
| 25***00 | Valve, Diverter, 12 Volt; Superceded 25/97***00 See Ti 5/080 | 0 |
| 25***01 | Coil, 12v | 1 |
E3-20-1 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***01 | Element, Air - Primary | 1 |
E3-3-1 Valve, Adapters
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
E4-6-1 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 23***08 | O Ring | 1 |
E4-18-1 Ram,Box Tipper
| 98***30 | Cylinder, Hydraulic | 1 |
| 98***45 | Locknut | 1 |
| 98***46 | Seal, Piston Head; Will Be Provided As A Part Of Seal Kit, 98***54.See San 09107.Ref L Collins/Strimec | 1 |
E4-14-1 Ram, Multi Hitch
| 99***00 | Ram, Complete, Strimech | 2 |
| 99***01 | Cylinder | 1 |
| 99***02 | Ring, Back Up | 1 |
E4-13-1 Ram, Strimech, Heston Bale Grab &, Wrapped Bale Clamp
| 54***10 | Nut | 1 |
| 54***12 | Piston | 1 |
| 54***14 | Bearing, Gland | 1 |
E4-16-1 Ram, Carriage, Sideshift
| 54***01 | Ram, Sideshift Carriage | 1 |
| 54***02 | Kit-Seal, Sideshift Carriage, Ram | 1 |
| 54***03 | Cylinder | 1 |
E4-8-1 Ram, Extension
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***85 | Shim, 0.5mm Thick | 0 |
E4-14-2 Ram, Multi Hitch
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
| 99***00 | Ram, Assembly, 76mm Cyl. Bore (3") | 1 |
E4-17-1 Ram, Tow Hitch,Oleo.
| 16***62 | Ram, Hydraulic Tow Hitch; See San 12977. Superseded To 55***18. | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-4-2 Ram, Displacement
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
E4-17-2 Ram, Tow Hitch Oleo, 526s 24"Wheels Only
| 16***08 | Ram, Hydraulic Tow Hitch | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-12-2 Ram,, Manure Fork,
| 90***22 | Body, Cylinder | 1 |
| 90***23 | Rod, Piston | 1 |
| 90***24 | Piston | 1 |
E4-7-1 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 23***09 | O Ring | 1 |
E4-6-2 Ram,Tilt, 'Black'Bearings
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 16***79 | Spacer | 2 |
E4-12-1 Ram, Log Grab, Manure Silage Fork, Fixed & Sliding & Flat 8 Bale Grab
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-11-1 Ram, Tow Hitch
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-15-1 Ram, Manure Fork, With Push Off
| 98***01 | Ram, Assembly | 1 |
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
E4-19-1 Ram,Multi-Shovel
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-1-1 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***08 | Pipe | 1 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
E4-7-2 Ram,Tilt, 'Black Bearings'
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 23***09 | O Ring | 1 |
F Axles, Wheels & Transmission
F1-5-3 Shaft,Drive, 520
| 91***07 | Kit-Spider | 2 |
| 91***02 | Shaft, Hub Side; 91***01 + 82***94 | 1 |
| 91***02 | Yoke, Double | 1 |
F1-7-1 Dropbox (520), Jcb Permanent 4wd, Ratio 1.179 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-10-1 Axle Drive Head,, Rigid Axle, Ratio 1.9375 : 1
| 13***07 | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F1-9-1 Axle Arm & Wheel Hub, Pad Mounted, G.A.
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-1-1 Axle Assembly,, Front
| 10***01 | Nut | 10 |
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***07 | Bolt, M16 X 25 | 1 |
F1-1-2 Axle Assembly,, Front, 520-55,520-55fs.
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***1Z | Nut, M24 | 4 |
| 14***4Z | Washer | 8 |
F1-5-1 Differential, Components
| 13***8Z | Bolt, M8x80mm Long | 8 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Gear Kit | 1 |
F1-12-1 Wheel Hub, Salvage/Retro Fit, Scheme
| 99***00 | Hub, Wheel Front Rh Assembly, 526 Salvage Kit; Superseded To 99***00 For M/C'S To M279288, & 99***00 For M/C'S From M279289 San 08330 | 1 |
| 99***00 | Hub, Wheel Front Lh Assembly, 526 Salvage Kit; Superseded To 99***00 For M/C'S To M279288, & 99***00 For M/C'S From M279289 San08330 | 1 |
| 99***00 | Hub, Wheel Rear Lh Assembly, 526 Salvage Kit; Superseded To 99***00 For M/C'S To M279288, & 99***00 For M/C'S From M279289 San08330 | 1 |
F1-6-3 Dropbox (526 & 520), J.C.B.Permanent 4wd, 1.545 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-5-4 Differential, Components Lsd
| 44***08 | Pin, Trunnion | 1 |
| 44***03 | Plate, Pressure | 2 |
| 44***04 | Plate, Friction | 8 |
F1-3-2 Ram Steering,, Front Axle,Install, Extended Chassis
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-1-5 Axle Assembly,Front, 520-55 & 520-55fs
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***1Z | Nut, M24 | 4 |
| 14***4Z | Washer | 8 |
F1-2-1 Hub & Components, Steering Axle
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
F1-6-4 Dropbox (526 & 520), J.C.B 2/4wd Disc, Ratio 1.545 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-6-1 Dropbox (526 & 520), 2/4wd J.C.B., Ratio 1.179 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-5-2 Shaft, Drive, 526-55,526 & 526s
| 91***07 | Kit-Spider | 2 |
| 91***02 | Shaft, Hub Side; 91***01 + 82***94 | 1 |
| 91***02 | Yoke, Double | 1 |
F1-8-1 Axles, Rigid Pad Mntd Jcb, 2ws 2/4 Disc 16.17 : 1
| 13***3Z | Bolt, M12 X 55 | 4 |
| 13***16 | Bolt, M16x70l | 28 |
| 44***00 | Gearbox, Dropbox | 1 |
F1-7-4 Dropbox (520), J.C.B. 2/4wd Disc, Ratio 1.79 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-1-4 Axle Assembly, Ext Chassis
| 10***01 | Nut | 10 |
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***07 | Bolt, M16 X 25 | 1 |
F1-7-3 Dropbox (520), Permanent 4wd J.C.B., Ratio 1.545 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-7-2 Dropbox (520), Jcb 2/4wd Disc, Ratio 1.79 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-1-3 Axle Assembly,, Front, Ext Chassis >M279289
| 10***01 | Nut | 10 |
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***07 | Bolt, M16 X 25 | 1 |
F1-4-1 Axle Drive Head,, Steering Axle
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***02 | Sleeve, Splined | 1 |
F1-30-1 Replacement Hub Kits
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
| 22***45 | Circlip | 2 |
F1-4-2 Axle Drive Head, Steering Axle, L.S.D.
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***02 | Sleeve, Splined | 1 |
F1-3-1 Ram, Steering, Front Axle, Installation
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 16 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-9-2 Axle Arm & Wheel Hub, Pad Mtd
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-6-2 Dropbox (526 & 520), J.C.B. Permanent 4wd, Ratio 1.179 : 1
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-8-2 Axles, Rigid Pad Mntd Jcb, 12.34 : 1
| 13***3Z | Bolt, M12 X 55 | 4 |
| 13***16 | Bolt, M16x70l | 28 |
| 44***00 | Gearbox, Dropbox | 1 |
F2-30-1 Replacement Hub Kits, "See Ti 5/210"
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
| 22***45 | Circlip | 2 |
F2-7-1 Shaft, Drive, Non-Braked Axle
| 91***01 | Shaft, Hub Side, 244.5mm Long; Replaced By Mss 91***01 + 82***94, See San08824 | 1 |
| 91***07 | Kit-Spider | 1 |
| 91***00 | Shaft, Drive, Btb 320 | 1 |
F2-5-1 Ram, Steering, Rear Axle 4ws, Installation
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-1-2 Axle Assembly,, Rear, Ext Chassis
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-8-1 Axle Assembly, Rear, 520 4ws
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-9-1 Ram,Steering,, Rear Axle,520 2ws, Installation
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-3-1 Hub & Components, Non-Braked Axle
| 10***01 | Nut | 20 |
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-4-2 Hub & Components, Braked Axle
| 13***7Z | Bolt, Coated | 2 |
| 13***03 | Screw, Set | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-6-1 Shaft, Drive, Braked Axle
| 91***02 | Kit-Spider | 2 |
| 91***04 | Joint, Double Yoke | 1 |
| 91***00 | Shaft, Drive; Superseded By 91***40 & 82***94.San 13925, Refer T Boothroyd. | 2 |
F2-4-1 Hub & Components, Braked Axle
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
F2-1-1 Axle Assembly, Rear
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-2-1 Differential, Assembly
| 13***8Z | Bolt, M8x80mm Long | 8 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-8-2 Axle Assembly,, Rear 2ws, 520
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-6-2 Shaft,Drive,, Braked Axle,, 520 & 504 4ws
| 91***07 | Kit-Spider | 2 |
| 91***02 | Shaft, Hub Side; 91***01 + 82***94 | 1 |
| 91***03 | Nipple, Grease | 1 |
F3-6-1 Propshafts
| 11***25 | Strap | 6 |
| 16***07 | G.A. | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F3-1-1 Wheels & Tyres, For Jcb Axles
| 15***01 | Valve | 1 |
| 16***16 | Wheel, & Tyre. Michelin, 375/75 R20 Xm27 | 4 |
| 16***17 | Wheel, & Tyre. Continental, 14.5-20 10ply Mpt | 4 |
F3-6-2 Propshafts
| 11***25 | Strap | 6 |
| 16***76 | G.A., Driveshaft Kit, 526-55 Ext/Chassis | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F3-5-1 Propshafts
| 16***29 | G.A. | 1 |
| 16***30 | G.A. | 1 |
| 16***25 | G.A. | 1 |
F3-3-2 Wheels &, Tyres, Extended Chassis
| 10***01 | Nut | 20 |
| 15***01 | Valve | 1 |
| 16***66 | Wheel, & Tyre Assembly.Traction, 17.5lr X 24 | 4 |
F3-1-20 Drive Shaft, Universal, Joints (Spider Kits)
| 91***02 | Kit-Spider | 1 |
| 91***03 | Kit-Spider, 82mm Over Caps, 27mm Dia. | 1 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 1 |
F3-3-1 Wheels & Tyres
| 10***01 | Nut | 20 |
| 15***01 | Valve | 1 |
| 16***08 | Wheel, & Tyre, Michelin, 405/70 R20 M27 | 4 |
F3-2-1 Wheels & Tires
| 15***01 | Valve | 1 |
| 16***03 | Wheel, & Tyre, Michelin, 375/75 R20 Xm27 | 4 |
| 16***06 | Wheel, & Tyre, Goodyear, 12.5-18 10ply | 4 |
F5-5-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F5-6-1 Transmission, Mounting
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***9Z | Bolt, M12x90mm | 2 |
F5-1-1 Transmission, Jcb Syncro Shuttle
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-7-1 Cooler, Oil, & Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
| 16***60 | G.A. | 1 |
F5-2-1 Transmission, Jcb Syncro Shuttle, Components
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F5-1-2 Transmission, Jcb Syncro Shuttle
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-3-1 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-4-1 Gear Change
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
| 44***00 | Lever, Assembly | 1 |
G Brakes
G1-8-1 Brake Pedal,Master, Cylinder & Vent 4ws
| 13***4Z | Bolt | 1 |
| 13***8Z | Bolt, M10 X 30 | 3 |
| 13***1Z | Bolt | 1 |
G1-4-2 Brake System,, Chassis, 4ws, 520
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Nut | 4 |
G1-3-1 Brake System,, Chassis,2 W/S.
| 16***03 | Pipe, Brake L/H. | 1 |
| 16***04 | Pipe, Brake R/H. | 1 |
| 64***00 | Hose, Brake | 2 |
G1-5-2 Brake Components,, Front Axle
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
G1-7-2 Brake System,, Chassis,4ws, 526s & 526 Ext Chassis
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Nut | 4 |
G1-6-1 Brake, Components
G1-7-1 Brake System, Chassis, 4ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 1 |
| 13***2Z | Nut | 1 |
G1-1-2 Brake Pedal, & Master Cylinder, Installation, 2ws
| 12***01 | Plate, Lock | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
G1-2-1 Brake Pedal, & Master Cylinder, Installation, 4ws
| 12***01 | Filter | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
G1-5-1 Brake, Components
G1-4-1 Brake System, Chassis, 4ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 1 |
| 13***2Z | Nut | 1 |
G1-2-2 Brake Pedal, &, Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
G1-8-2 Brake Pedal,, Master Cylinder &, Vent 4ws
| 13***4Z | Bolt | 1 |
| 13***8Z | Bolt, M10 X 30 | 3 |
| 13***1Z | Bolt | 1 |
H Steering
H1-2-1 Hose & Pipework, Steering 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
H1-3-1 Hose & Pipework, Steering 2ws
| 16***79 | G.A. | 1 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***03 | Adapter | 2 |
H1-1-1 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
H1-4-1 Hose & Pipework, Steering 4ws
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
H1-2-3 Hose & Pipework,, Steering 4ws, For Air Con
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 14***11 | Seal, Bonded | 2 |
H1-2-2 Hose & Pipework, Steering 4ws, Jcb Axles.
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 14***11 | Seal, Bonded | 2 |
N Engine
N1-3-3 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-3-4 Block Assembly, Ab Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-5-3 Fans, Pulleys, & Fan Belt, Aa Build
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N1-7-1 Flywheel, Aa & Ab Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
N1-2-2 Engine, Short, Ab Build
| 02***46 | Engine, Short, 1004-4t, Turbocharged | 1 |
N1-1-5 Engine, Complete, Ab Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 106bhp | 1 |
N1-3-5 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
N1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ab Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N1-5-4 Fans, Pulleys, & Fan Belt, Ab Build
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***81 | Belt, Fan, Pair | 1 |
N1-1-2 Engine, Complete, Ab Build
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 106bhp | 1 |
N1-1-4 Engine, Complete, Ab Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 90bhp | 1 |
N1-1-3 Engine, Complete, Aa Build
| 01***00 | Engine, Complete, 1004-4, Nat/Aspirated | 1 |
N1-6-3 Timing Case, Camshaft & Gears, Aa & Ab Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete, 1004-4, Naturally Aspirated | 1 |
N1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***00 | Bracket, Engine Mounting, Left Hand | 1 |
N2-1-2 Cylinder Head, Ab Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-4-1 Lifting Plates, Engine, Aa & Ab Builds
| 02***13 | Plate, Lifting | 1 |
| 02***31 | Plate, Lifting | 1 |
| 02***36 | Plate, Lifting | 1 |
N2-2-2 Rocker Assembly, Push Rods & Tappets, Aa & Ab Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-3-2 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
N3-4-2 Silencer, Ab Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7Z | Bolt, M10x25 | 1 |
N3-2-2 Manifold, Exhaust, Ab Build
| 02***50 | Gasket | 2 |
| 02***22 | Gasket | 1 |
| 02***76 | Manifold, Exhaust | 1 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***03 | Stud | 3 |
N3-4-1 Silencer, Aa Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N3-3-1 Filter, Air, Aa Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***69 | Spacer | 1 |
N3-1-2 Manifold, Induction, Ab Build
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
| 02***09 | Gasket | 1 |
N3-4-6 Silencer, Ab Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
N3-3-2 Filter, Air, Ab Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***69 | Spacer | 1 |
N3-4-3 Silencer, Aa Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 2 |
N3-4-4 Silencer, Ab Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 5 |
N4-4-3 Radiator & Hoses, Ab Build
| 12***01 | Strap | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
N4-3-2 Radiator, Fittings & Mountings, Ab Build
| 12***81 | Cowling, Fan | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 12 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
N4-1-1 Pump, Water, Aa & Ab Builds
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
| 02***84 | Seal | 1 |
N4-4-1 Radiator & Hoses, Aa Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-1 Radiator, Fittings & Mountings, Aa Build
| 12***81 | Cowling, Fan | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 12 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa & Ab Builds
| 02***95 | Plug, Taper | 1 |
| 02***92 | Thermostat | 1 |
| 02***46 | Plug | 1 |
N4-4-2 Radiator & Hoses, Hot Climate
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N5-5-2 Cooler, Oil, Filter & Pipework, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N5-2-2 Pump, Oil, & Relief Valve, Ab Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N5-3-1 Piston Cooling Jets, Ab Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
N5-4-1 Filter, Oil, Aa Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
| 02***96 | Gasket | 2 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N5-1-1 Sump, Oil, Aa & Ab Builds
| 02***26 | Spacer | 1 |
| 02***73 | Gasket | 1 |
| 02***82 | Plug, Oil Drain | 2 |
N6-6-1 Filter, Fuel Sediment, Aa & Ab Builds
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***06 | Filter, Swirl Cone | 1 |
N6-5-2 Fuel Heater, & Fuel Feed Pipe, Ab Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
N6-3-2 Fuel Pipes, Injection Pump, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 4 |
N6-1-2 Pump, Fuel Injection, Ab Build, 106bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-2-2 Injectors, Fuel, & Injection Pipes, Ab Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 1 |
N6-3-1 Fuel Pipes, Injection Pump, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N6-7-3 Filter, Fuel, Aa & Ab Builds
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-2-5 Injectors, Fuel, & Injection Pipes, Alternative, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-2-4 Injectors, Fuel, & Injection Pipes, Ab Build, 90bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-8-2 Pump, Fuel Lift, Aa & Ab Builds
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-2-3 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-5-1 Fuel Heater, & Fuel Feed Pipe, Aa Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
N6-1-3 Pump, Fuel Injection, Ab Build 90bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N7-1-1 Turbocharger, Ab Build
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-5-1 Compressor 12.Volt, Air Conditioning
| 01***04 | Belt, Drive | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***8Z | Bolt, M8x80mm Long | 1 |
N7-1-2 Turbocharger, Ab Build
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***60 | Turbocharger | 1 |
N7-7-3 Heater, Engine Block
| 12***64 | Clamp, Block Heater | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
N7-2-1 Turbocharger, Pipework & Mounting, Ab Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
N8-1-1 Gasket Sets, Aa & Ab Build
| 02***74 | Kit-Gasket, Top | 1 |
| 02***77 | Kit-Gasket, Bottom | 1 |
N8-2-1 Kit, Engine Overhaul, Aa Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-2-2 Kit, Engine Overhaul, Ab Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
526-55 FS serial number reference
On Loadall telehandlers, the machine identification plate is located on the chassis or cab frame, typically near the cab step or the boom-pivot area. The serial number is also stamped into the main chassis frame between the front and rear axles. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 0277468 - 0289999 | Applicability for JCB 526-55 & 526-55 FS Telehandler hydraulic cylinder seal kits (displacement, boom extension, boom lift, carriage tilt, tow hitch, log grab, carriage sideshift, and box tipper/Strimech cylinders). |
Frequently asked questions
What engine does the JCB 526-55 FS use?
The JCB 526-55 FS uses a Perkins 1000 series diesel engine. Early models (up to S/N the OEM part reference) typically use Type AA or AB builds, while later low-emission variants use Type AR or AK builds.
What is the operating weight of the JCB 526-55?
The operating weight of the JCB 526-55 is approximately 5.66 tonnes (12,478 lbs). This weight can vary slightly by configuration and attachment package.
What model replaced the JCB 526-55?
The JCB 526-55 was replaced by the JCB 526-55 S series, which began production in 2004. The S series features updated emissions compliance and modernized controls.
What 526-55 FS owners discuss
What engine type is used in the JCB 526-55 FS, and are there known quirks regarding its performance or fuel consumption?
The JCB 526-55 FS utilizes a JCB-branded engine, distinct from Perkins engines found in earlier or different model lines. Owners note the engine is reliable but can be "thirsty" (high fuel consumption). It is described as "dour when cold" but performs well once warmed up. The engine is designed to produce high power and torque at low speeds (1,300-1,400 rpm) for responsive hydraulic and transmission matching.
What are the common hydraulic and transmission issues reported for this machine series?
A major issue identified in production around 2013 involves the magnetic solenoid joystick and hydraulic pump failure area. Transmission problems include loss of drive in forward or reverse, often linked to the shuttle box or direction relays. Operators report that topping up the shuttle box fluid can temporarily cure movement issues, but complete failure may require component replacement. Electrical faults in the direction relays are also a known cause of drive loss.
What wear patterns are typical for the undercarriage and boom components on the JCB 526-55?
Wear pads on the inner and outer boom sections are standard wear items requiring regular inspection and replacement. The machine features a high-speed double boom chain extension system; wear on these chains and associated guides affects extension precision. Tire wear is influenced by the machine's operating weight (5.66 to 5.84 tons depending on series) and ground pressure.
What electrical or sensor issues are commonly discussed by owners?
Starting issues and intermittent operation are frequently attributed to electrical faults rather than mechanical ones. Specific components to check include the direction relays (three per transmission control circuit) and microswitches associated with the forward/reverse lever. Sensor failures or switch misalignment can prevent the hydraulic solenoids from activating, resulting in the engine revving without movement.
What are the key specifications for the JCB 526-55 FS regarding weight, capacity, and lift height?
The JCB 526-55 has an operating weight of 5.66 tons (12,478 lb) for the 1996-2004 series and 5.84 tons (12,875 lb) for the 2004-2008 series. Nominal load capacity is 2.6 tons (5,732 lb) at the center of gravity. Lifting height ranges from 5.5 meters (18 ft 0 in) to 5.61 meters (18 ft 5 in). It has a capacity of 1 ton (2,205 lb) at full forward reach.
What fluid specifications and capacities are recommended for the JCB 526-55?
Engine oil specification is JCB 10W/30 Multigrade. Coolant mixture is 55% antifreeze, starting to freeze at -36° C (-33° F). Hydraulic system capacity varies by configuration; fill with all rams closed and check the sight glass. Total hydraulic capacity is not fixed but depends on the equipment attached. Use JCB genuine hydraulic oil and filters for warranty and performance assurance.
What should be checked when buying a used JCB 526-55 FS?
Verify the serial number range (the OEM part reference - the OEM part reference for the 526-55, or the OEM part reference - the OEM part reference for specific carriage sideshift cylinder applications) to determine the correct service manual and component specs. Check for the 2013-era magnetic solenoid joystick and hydraulic pump issues. Inspect the shuttle box fluid level and condition. Test all direction relays and microswitches for intermittent operation. Verify the condition of the boom wear pads and double chain extension system. Note that the newer side-engine versions (post-2007) are reported as more troublesome than earlier models.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 526-55 FS. Related factory variants of the same model family:
526-55 FS
Need a specific 526-55 FS part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.