JCBagriculturaltelescopic handlers (loadall)
Jcb 525-67 F.S
Maintenance schedule, common problems & OEM parts breakdown
The JCB 525-67 F.S is a telehandler from the 500 Series, produced from 1989 to 1995. It weighs 6.42 tons and has a nominal load capacity of 2.5 tons at the center of gravity. The lifting height is 6.8 meters. It has a capacity of 1 ton at full forward reach and 2.5 tons at full lift height. The machine is part of the Loadall family. It succeeded the 520 series. It was followed by the 530 series. Configurations include two-stage and three-stage booms. It offers basic servo options and Farm Special variants.
The 525-67 F.S introduced the 500 Series platform. It replaced the 520 series. The 530 series succeeded it. The machine matters in the used market because it uses a JCB Diesel engine. This engine does not require DEF or DPF after-treatment. This reduces operating costs. The 500 Series has a 500-hour engine oil interval. This extends service life. The machine is common in agricultural and construction sectors. Parts are available from multiple suppliers. The 525-67 F.S is a reliable workhorse. It is easy to maintain. It has a simple hydraulic system. It is a good choice for budget-conscious buyers.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 525-67 F.S specifications
Engine
| Model | Perkins 1004 |
| Gross Power | 71 kW (95 hp) |
| Displacement | 2.5 L (152.56 cu in) |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 6,420 kg (14,154 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | Not documented for this exact serial range — verify with your dealer |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | Not documented for this exact serial range — verify with your dealer |
| Wheelbase | 2,388 mm (94 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
| Lifting Height | 6.8 m (22.31 ft) |
| Maximum Reach Horizontal | 3.55 m (11.65 ft) |
Performance
| Travel Speed | Not documented for this exact serial range — verify with your dealer |
| Lift Capacity (Max) | 2,500 kg (5,512 lb) |
| Lift Capacity (Full Reach) | 1,000 kg (2,205 lb) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
525-67 F.S fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 10 L (2.6 gal) | JCB 15W/40 Multigrade (SAE 15W/40, MIL-L-46152B, API CD/SE) for -10 °C to 50 °C (14 °F to 122 °); JCB Super Universal Agricultural (SAE 10W/30, MIL-L-2105, MIL-L-46152, API CD/SE) for -15 °C to 30 °C (5 °F to 86 °F); JCB Torque Converter Fluid (SAE 10W, MIL-L-46152, MIL-L-2104D, API CD/SE) for -18 °C to 0 °C (0 °F to 32 °F). New engines filled at factory with JCB 10W/30 Multigrade; drain after first 100 hours and replace with recommended grade. |
| Cooling System | 17 L (4.5 gal) | JCB Universal Antifreeze/water (ASTM D3306-74). 55% antifreeze mixture starts to freeze at -36 °C (-33 °F). |
| Fuel Tank | 90 L (24 gal) | Diesel Oil (ASTM D975-66T Nos. 1D, 2D). |
| Transmission (Syncro Shuttle) | 18.25 L (4.8 gal) | JCB Special Transmission Fluid (ESP-M2C 33G). |
| Transmission (Powershift) | 15.0 L (4 gal) | JCB Special Transmission Fluid (ESP-M2C 33G). |
| Front Axle Housing | 18 L (4.8 gal) | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Front Axle Hubs (each) | 1.0 L (0.3 gal) | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Rear Axle Housing | 13 L (3.4 gal) | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Rear Axle Hubs (each) | 1.0 L (0.3 gal) | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Hydraulic System (Tank) | 152 L (40.2 gal) | JCB High Performance Hydraulic Oil (ISO VG46) for temperatures above 38 °C (100 °F); JCB Special Hydraulic Fluid (ISO VG32) for temperatures below 38 °C (100 °F). Nominal machine capacity; total system capacity depends on equipment used. Fill with all rams closed. |
| Brake System | Not specified | JCB Light Hydraulic Fluid (ISO VG15). Do not use ordinary brake fluid. |
| Grease (General) | Not specified | JCB Special MPL Grease (Lithium based, No. 2 consistency). If JCB MPL Grease is used, 50-hour greasing operations must be carried out at 10-hour intervals; 500-hour greasing operations must be carried out at 50-hour intervals. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 525-67 F.S maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 100 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 525-67 F.S beyond the schedule
Predictive Maintenance & Fluid Analysis
Take oil samples from the engine, hydraulic tank, and axle systems at the 500-hour interval. This creates a baseline for future comparisons. Inspect the hydraulic return filter magnet for metallic debris. Check the turbocharger shaft play and charge cooler boots at 1000 hours. Monitor the air filter restriction indicator. Replace the air filter element per the indicator. Check the boom wear pad clearance and condition. These tasks help prevent major failures. They extend the machine's life. They save money on repairs. They ensure reliable operation. They are critical for the 525-67 F.S.
Corrective & Common Repairs
Replace the engine oil and oil filter at 500 hours. Replace the primary and secondary fuel filters. Inspect all hoses and cylinders for chafing or seepage. Check the drive belt tension and condition. Inspect the front and rear axle housing oil levels. Check the tire pressure and cut damage. Verify the GET teeth, pins, and quick-hitch security. Grease all pivot pins including the boom, arm, and stabilizer pivots. Check the battery electrolyte level on non-sealed units. These tasks are essential for the 525-67 F.S.
Overhaul & Rebuild Points
Drain, flush, and refill the coolant system at 1000 hours. Replace the transmission oil and filter. Replace the front and rear axle oil including hubs. Run a full ECM diagnostic scan via the JCB ServiceMaster tool. Inspect the structural steelwork for cracking or unauthorized welding. Measure the swing ring play using a dial indicator. Inspect the brake disc wear and immersed brake condition. Check the injector spray patterns via the diagnostic tool. Service the cab HVAC system and replace the cabin filter. These tasks are critical for the 525-67 F.S.
Seasonal & Environment Servicing
Use JCB 10W/30 Multigrade oil for the first 100 hours of operation. Replace it with JCB 15W/40 Multigrade oil after 100 hours. Use JCB Super Universal Agricultural oil for temperatures between -15°C and 30°C. Use JCB Torque Converter Fluid for temperatures between -18°C and 0°C. Use JCB High Performance Hydraulic Oil for temperatures above 38°C. Use JCB Special Hydraulic Fluid for temperatures below 38°C. Use JCB Waxoyl on the boom wear pad runways. Use JCB Special Slide Lub on the boom hoses. These fluids are specific to the 525-67 F.S.
525-67 F.S common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 200/44600 | Filter, Assembly, Fuel Sediment | Fuel system service | Check fitment → |
| 02/200165 | Pipe, Assembly, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/200176 | Pipe, Assembly, Fuel, Filter To Inj/Pump | Fuel system service | Check fitment → |
| 02/200177 | Pipe, Assembly, Fuel, Inj/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/200374 | Pipe, Assembly, Fuel, Filter To Heater | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
525-67 F.S fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Low fuel supply pressure, faulty lift pump, or restricted fuel filter | Check fuel filter condition and fuel line integrity; verify lift pump operation |
| P0088 | Fuel rail/system pressure too high | Faulty pressure regulator, restricted return line, or high-pressure pump issue | Inspect fuel return lines for blockages; check pressure regulator function |
| P0117 | Engine coolant temperature sensor circuit low input | Faulty coolant temperature sensor, shorted wiring, or poor connector contact | Inspect sensor wiring harness and connectors for damage; test sensor resistance |
| P0118 | Engine coolant temperature sensor circuit high input | Open circuit in coolant temperature sensor wiring or failed sensor | Check wiring continuity to the coolant temperature sensor; replace sensor if open |
| P0102 | Mass airflow (MAF) sensor circuit low input | Dirty or faulty MAF sensor, intake air leak, or wiring fault | Clean MAF sensor; inspect intake ducting for leaks and wiring for damage |
| P0335 | Crankshaft position sensor 'A' circuit no signal | Failed crankshaft position sensor, damaged wiring, or faulty reluctor ring | Inspect sensor and wiring; check sensor gap and reluctor ring for damage |
| P0200 | Injector circuit open | Open circuit in injector wiring harness or connector | Inspect injector connectors and wiring harness for damage or corrosion |
| P0090 | Fuel pressure regulator 1 control circuit open | Open circuit in fuel pressure regulator control wiring or failed regulator | Check wiring and connectors to the fuel pressure regulator; test regulator function |
| P0112 | Intake air temperature sensor circuit low input | Faulty intake air temperature sensor or shorted wiring | Inspect sensor and wiring; test sensor resistance and replace if faulty |
| P0113 | Intake air temperature sensor circuit high input | Open circuit in intake air temperature sensor wiring or failed sensor | Check wiring continuity to the intake air temperature sensor; replace sensor if open |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
525-67 F.S attachments & work tools
Bale Handling
Integrated-frame bale spears mount to the JCB Q-Fit quick attach system for handling round and rectangular bales. Single spear options reach 52 inches with a 3,000 lb rating, while dual or triple forged spear configurations offer 3,800 to 4,000 lb ratings for mid-size to large square bales. Transport frames for two 6-foot diameter bales utilize four bolt-in spears with a 6,000 lb rating.
Quick Attach Systems
The machine utilizes the JCB Q-Fit quick attach system as the primary mounting interface for compatible work tools. Alternative mounting options include the Compact Tool Carrier (CTC) and standard skid steer style mounts, all available with optional hydraulic pin locking for secure attachment changes.
Hydraulic Specifications
Auxiliary hydraulic functions operate with a maximum pressure of 235 bar and a maximum flow rate of 21.13 gal/min (80 L/min). These specifications support the operation of proportional auxiliaries via single-lever electro-servo controls for precise tool management.
Lifting Capacity
Maximum lift capacity is 5,500 lb (2,495 kg) with the boom retracted. Capacity reduces to 3,000 lb (1,361 kg) at full height and 1,650 lb (748 kg) at full forward reach of 10 ft 130 in (3.3 m).
Safety & Guarding
The operator cab is certified to ROPS (Rollover Protection System) and FOPS (Falling Objects Protection System) standards. Standard safety features include hose burst check valves (HBCVs) to prevent ram collapse during hose failure and a standard reversing alarm for bystander protection.
All 525-67 F.S assemblies by section
Every catalogued assembly group for the Jcb 525-67 F.S. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-2-1 Shovel, 1.0cu.M.,, With Bolt On Toe Plate
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 2 |
| 13***1Z | Nut | 16 |
A1-1-2 Shovel, 1.1cu.Yd, 2235mm (7'4")Wide
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-3-1 Shovel, Clam, 6 In 1, 2260mm (7'5") Wide
| 10***04 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 2 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
A1-1-1 Shovel,, 1.0cu.M
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-4-1 Shovels, 8.0 Ft Wide
| 13***1Z | Nut | 9 |
| 14***1Z | Washer, Spring | 9 |
| 54***80 | Toeplate, Weld On | 1 |
A1-2-2 Shovel,, 1.1cu.Yd.(88"Wide), With Bolt On Toe Plate
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A1-5-1 Tooth Guard
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt, 1/2" X 2.1/4" Long | 2 |
A1-3-2 Shovel, Clam, 6 In 1, 2260mm (7'5") Wide
| 10***04 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 2 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
A1-6-1 Trash Clamp Bucket, 2.5 Cu Yd
| 13***06 | Bolt | 6 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
| 45***00 | Coupling, Female, 3/8" Bsp; Replaced By 45/91***00, See San04893 | 1 |
A1-3-4 Shovel,Clam,6 In 1, 2260mm Wide
| 12***23 | Bush | 2 |
| 12***00 | Jaw, Clamshovel | 1 |
| 13***6Z | Bolt | 2 |
A1-3-3 Shovel, Clam, 6 In 1, 2260mm (7'5") Wide
| 10***04 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 2 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
A1-5-2 Tooth Guard, 6 In 1 Clam Shovel
| 12***00 | Guard, Tooth | 1 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
A1-1-3 Shovel, 0.9cu.M.,, 2286mm (7'62)Wide
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 1 |
| 13***01 | Nut | 16 |
A3-9-1 Jib, 4 Metre, Extension
| 14***02 | Screw, Self Tapping | 4 |
| 53***01 | Link, 1.25 Ton | 1 |
| 54***00 | Jib, 4 Metre Extension, Assembly | 1 |
A3-3-2 Guard, Load, 'Q'Fit Carriage
| 54***00 | Guard, Load; San 23375.Mss To 33***49 & 83***67.28/2/7, P Gamble. L06/223 | 1 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-27-1 Fork Retention Kit
| 54***01 | Link, Fork Retaining | 2 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-10-1 Crane Hook, Fork Mounted
| 15***00 | Pin | 2 |
| 22***67 | Circlip | 2 |
| 54***00 | Hook, (1 Tonne) Assembly, Fork Mounted | 1 |
A3-6-7 Counterweight, With Tow Hitch
| 13***28 | Bolt | 4 |
| 13***8Z | Bolt, M20 X 180mm Long | 4 |
| 13***3Z | Nut | 4 |
A3-30-1 Installation, 2.5 Yd, Scrap Grapple Bucket
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-8-1 Concrete Skip
| 11***00 | Pin, Lynch, With Chain | 1 |
| 54***00 | Skip, Concrete, Assembly | 1 |
| 54***01 | Spring, Shuttle | 2 |
A3-52-2 Side Tilt Carriage, Boom Mntd (Usa Only)
| 13***10 | Bolt | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-22-5 Wrapped Bale Clamp
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
| 13***3Z | Nut, M20 | 3 |
A3-35-2 12' Truss Boom Q-Fit, Optional
| 15***00 | Stop, Sliding | 1 |
| 33***18 | Boom, Truss | 1 |
| 33***20 | Decal | 1 |
A3-51-1 48" & 66" Sideshift, Carriages (Usa Only)
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
A3-36-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 22 |
A3-1-5 Carriage, Sideshift
| 13***12 | Screw, Cap; Replaces 60***12, San 13331 | 2 |
| 54***00 | Carriage, Sideshift, Class 3 | 1 |
| 54***01 | Pin, Clevis | 2 |
A3-1-3 Carriage, 'Q'Fit
| 11***20 | Boss, Pivot | 2 |
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-21-5 Fork, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 81***68 | Plate, Rating | 1 |
A3-5-1 Tow Hitch, Manual, Installation
| 13***8Z | Bolt | 4 |
| 13***6Z | Bolt | 4 |
| 13***6Z | Bolt | 2 |
A3-7-1 Installation, Hydraulic Pin Lock, Quickfit Carriage
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 1 |
A3-3-3 Guard, Load
| 13***4Z | Bolt | 4 |
| 13***4Z | Nut | 4 |
| 33***17 | Guard | 1 |
A3-1-8 Carriage, Side Tilt
| 13***04 | Bolt | 2 |
| 13***06 | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
A3-33-1 Installation, Hay Squeeze
| 13***4Z | Bolt, 3/8" | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 12 |
A3-13-1 Fork, Manure, Silage, With Top Grab, & Push Off Unit, 7'6 "Wide X 65cu.Ft
| 54***00 | Fork, Manure/Silage, & Top Grab Complete; Nla By A Little 19/4/94, San 04924 | 1 |
| 54***01 | Bracket | 2 |
| 54***02 | Fork, Push Off Unit | 1 |
A3-32-1 Installation, 1.25 Yd, Scrap Grapple Bucket
| 13***4Z | Bolt, 3/8" | 8 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
A3-2-2 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-6-8 Counterweight, Front
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***8Z | Washer | 4 |
A3-4-2 Tow Hitch, Hydraulic, Installation
| 10***32 | Pin, Pivot | 2 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt | 2 |
A3-40-1 Silashear
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-42-1 Fork, Manure/Silage, High Capacity
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
| 54***04 | Nut | 9 |
A3-18-1 Blade, Grain Pusher
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 10ft Reach; Nsp Ref A.Little, Resurrected By K Colclough San 03763 | 1 |
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 7ft Reach; Nsp Ref A.Little | 1 |
A3-15-1 Bucket, Grain, Potatoe, 90 & 105 Cub.Ft 7'6" & 8'0" Wide
| 54***00 | Bucket, Grain/Potato, 8'-0"Wide X 105cu/Ft; Nsp Ref A.Little | 1 |
| 54***01 | Plate, Toe | 1 |
| 54***00 | Bucket, Grain/Potato, 7'-6"Wide X 90cu/Ft; Nsp Ref A.Little | 1 |
A3-12-1 Fork, Manure, Silage, With Top Grab, 2.29m Wide X 1.9cu.M
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-28-1 Fork Kit, Italy
| 54***38 | Handle, Locking (Metric) | 2 |
| 54***00 | Fork, 125w X 40t X 1200l; Use 54***26 Fork.San5357 26/1/95 Gk | 1 |
| 54***26 | Fork, 125w X 40t X 1200l | 1 |
A3-31-1 Installation, Manure Fork W/Top Grab
| 13***4Z | Bolt, 3/8" | 6 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
A3-39-2 Sweeper Collector,, Mounting Frame, Fork Mounted
| 13***2Z | Bolt, M16x50m | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A3-25-1 Pole Handler, With Check Valves, & Diverter Valve Pack
| 54***00 | Attachment, Pole Planter, Complete; Nsp Ref A.Little | 1 |
| 54***01 | Frame, Front | 1 |
| 54***02 | Frame, Rear | 1 |
A3-2-3 Carriage, Fork, Industrial
| 54***00 | Frame, 1500 mm | 1 |
| 54***00 | Fork, Arm 100wx50tx1067l, Class 3b, Fork, Arm 100wx50tx1067l, Class 3b; Not Fitted On Usa Machines. All Forks Are Supplied In Matched Pairs Only And Cannot Be Replaced Individually | 1 |
| 54***00 | Fork, Industrial, 125w X 50t X 1200mm | 1 |
A3-29-1 Kits
| 98***00 | Kit, Sideshift Carriage, Class 2b, Kit, Sideshift Carriage, Class 2b; 525-58 & 67, 505-19 & 22. Fork Frame 54***00 (See A3-2-1), Is Required To Attach This Item To Machine. | 1 |
| 98***00 | Kit, Sideshift Carriage, Class 3b | 1 |
| 98***00 | Fork, Industrial Class 3b | 1 |
A3-6-10 Counterweight, With Tow Hitch
| 13***1Z | Bolt | 2 |
| 14***2Z | Washer, M20 | 10 |
| 15***00 | Pin | 1 |
A3-6-2 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 2 |
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***1Z | Bolt | 2 |
A3-6-5 Tow Hitch
| 13***6Z | Bolt | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
A3-39-1 Sweeper Collector, Mounting Frame, Q/Hitch/Pin Mount
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A3-1-11 Carriage, Sideshift
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, Male 3/8"Bsp, C/W 2x, 22***33 Circlips | 1 |
| 45***00 | Coupling, Female 3/8"Bsp C/W, 2x Circlip 22***43 | 1 |
A3-24-1 Grab, Log, Sliding Forks, 2 To 3 Ton
| 54***09 | Hose | 2 |
| 54***10 | Hose | 2 |
| 54***00 | Grab, Log - Sliding Forks, Complete; Nsp Ref A.Little | 1 |
A3-1-2 Carriage, 'Q'Fit, 4' 0" Wide
| 10***15 | Pin, Pivot | 2 |
| 10***24 | Pin, Pivot | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-17-1 Bucket, Slurry Rehandling, 7'-6"Wide X 50cu/Ft
| 54***01 | Plate, Toe | 1 |
| 54***00 | Bucket, Slurry Rehandling, 7'-6"Wide X 50cu/Ft; Use 98***00 Ref A.Little | 1 |
| 98***00 | Shovel, Slurry/Rehandling, 2290mm Wide, 1.5cu.M | 1 |
A3-20-1 Blade, Snow, 7'6" (2.29m) Wide
| 54***00 | Blade, Snow | 1 |
A3-1-4 Carriage, 'Q'Fit, 5'-4 1/2" Wide
| 10***15 | Pin, Pivot | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***6Z | Bolt | 2 |
A3-14-5 Bucket, Grain/Potato, 2290mm Wide
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 1.7cu.M | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A3-6-11 Counterweight, Front, For Direct Mount Side Tilt Carriage
| 13***8Z | Bolt | 2 |
| 13***6Z | Bolt | 2 |
| 13***3Z | Nut, 1" | 2 |
A3-6-9 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 2 |
| 13***0Z | Bolt, M20 X 200 | 4 |
| 13***1Z | Bolt | 2 |
A3-35-1 12' Truss Boom Q-Fit, Optional
| 33***18 | Boom, Truss | 1 |
| 33***20 | Decal | 1 |
A3-34-1 Man Platform, Uk & Spain Only
| 15***00 | Pin | 2 |
| 81***84 | Decal, Warning, Platform Securing | 1 |
| 81***21 | Decal, Jcb Platform | 1 |
A3-11-1 Fork, Manure, Silage, 2.29m Wide X 1.9cu.M
| 54***00 | Fork, Manure/Silage, Complete; Use 98***00 Ref A.Little | 1 |
| 54***01 | Frame | 1 |
| 54***02 | Boss | 9 |
A3-17-5 Bucket, Slurry/Rehandling
| 98***00 | Shovel, Slurry/Rehandling, 2290mm Wide, 1.0cu.M | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A3-22-1 Fork, Round Bale, With Push Off
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
| 45***00 | Coupling, Female, 3/8" Bsp; Replaced By 45/91***00, See San04893 | 2 |
A3-4-1 Tow Hitch, Hydraulic, Installation
| 10***32 | Pin, Pivot | 2 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt | 2 |
A3-47-1 Box Tipper,Sideways
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-1-9 Carriage, Side Tilt
| 13***04 | Bolt | 2 |
| 13***06 | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
A3-43-1 Multi-Shovel
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 8 |
A3-6-4 Tow Hitch
| 13***6Z | Bolt | 2 |
| 13***8Z | Bolt | 2 |
| 14***8Z | Washer | 4 |
A3-1-6 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-50-1 Load Guard(Usa Only), For Boom Mntd Side, Tilt Carriages
| 13***4Z | Bolt | 2 |
| 13***04 | Nut | 2 |
| 33***35 | Guard, Load | 1 |
A3-10-2 Crane Hook, Fork Mounted
| 15***00 | Pin | 2 |
| 22***67 | Circlip | 2 |
| 54***00 | Hook, (1 Tonne) Assembly, Fork Mounted | 1 |
A3-37-1 Sweeper Collector, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-23-1 Grab, Log, Fixed Forks, 2 To 3 Ton
| 54***00 | Grab | 1 |
| 54***01 | Frame | 1 |
| 54***03 | Grab, Arm | 2 |
A3-26-1 Fork Extensions
| 54***00 | Fork, Extensions, 8ft X 2 Tonne; Nsp Ref A.Little | 1 |
| 54***00 | Fork, Extension, 2.11m Long | 1 |
A3-22-8 Flat 8 Bale Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-19-1 Blade, Scraper, 7'6" (2.29m) Wide
| 54***01 | Plate, Toe | 1 |
| 54***00 | Blade, Scraper, 7'-6"(2.29m) Wide | 1 |
A3-70-1 Tines
| 99***00 | Fork, Tine | 1 |
A3-1-10 Carriage, 'Q'Fit
| 11***20 | Boss, Pivot | 1 |
| 11***24 | Boss, Pivot | 1 |
| 13***0Z | Bolt | 2 |
A3-14-1 Bucket, Grain, Potatoe, 50 & 70 Cub.Ft 7'6" Wide
| 54***00 | Bucket, Grain/Potato, 7'-6"Wide X 70cu/Ft; Use 98***00 Ref A.Little | 1 |
| 54***00 | Bucket, Grain/Potato, 7'-6"Wide X 50cu/Ft; Use 98***00 Ref A.Little | 1 |
| 54***01 | Plate, Toe | 1 |
A3-38-1 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A3-41-1 Fork, Manure/Silage, With Push Off & Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-2-1 Carriage, Fork, Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-36-2 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A3-16-1 Bucket, Root Crop
| 54***00 | Bucket, Root Crop; Use 98***00 Ref A. Little | 1 |
| 98***00 | Shovel, Root Crop, 2290mm Wide 105 Cu.M | 1 |
| 98***00 | Bucket, Root Crop, 2290mm Wide 2.1 Cu.M | 1 |
A3-1-1 Carriage, 'Q'Fit
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-52-1 Side Tilt Carriage, Boom Mounted
| 13***0Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-6-6 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
| 13***1Z | Bolt | 2 |
A3-22-9 Bale, Grab Hesston
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 1 |
| 54***07 | Kit-Seal | 1 |
| 98***00 | Grab, Bale | 1 |
A3-3-1 Guard, 'Q'Fit Carriage
| 54***00 | Guard | 1 |
| 54***00 | Guard, 'Q'Fit Carriage | 1 |
| 82***06 | Stop | 4 |
A3-1-7 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter | 2 |
A3-6-1 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
A3-21-1 Fork, Round Bale, 2 Bale Capacity
| 54***00 | Fork, Round Bale, Complete; 98***00 | 1 |
| 54***01 | Fork, Tine | 4 |
| 54***02 | Fork, Tine | 2 |
A3-6-3 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 4 |
| 13***6Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 180mm Long | 4 |
A3-12-2 Fork,Manure,Silage, With Power Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-42-2 Manure/Silage Grab
| 54***02 | Boss | 8 |
| 54***04 | Nut | 8 |
| 61***00 | Hose, 3/8"Bsp X 1000mm | 1 |
B Bodywork,Cab,Loader End, Refurbishments
B1-1-11 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-7-1 Tank, Diesel Fuel
| 10***01 | Gasket | 1 |
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***01 | Gasket, Filler Cap | 1 |
B1-5-4 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-6-5 Tank, Diesel Fuel, Hydraulic, Combined
| 10***01 | Gasket | 1 |
| 10***06 | Lock; Supply 12***71 | 2 |
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
B1-15-1 Guard, Trash
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B1-12-3 Guard, Trash, Inner Boom, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B1-2-1 Bodywork, Engine
| 12***01 | Stop, Bump | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 2 |
B1-6-8 Tank, Diesel Fuel, Hydraulic, Combined
| 10***01 | Gasket | 1 |
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
| 12***39 | Strainer, Fuel, Gauze | 1 |
B1-3-7 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***0Z | Bolt | 6 |
| 13***2Z | Bolt | 2 |
B1-6-4 Tank, Hydraulic, & Battery Box
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***17 | Boss | 8 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-6-2 Tank, Diesel Fuel, Hydraulic, Combined
| 10***06 | Lock; Supply 12***71 | 2 |
| 10***01 | Gasket; See San 13912.10***01 Similar To 10***01, 10***01 N.L.A. P Gamble. | 1 |
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
B1-10-1 Guards, Propshaft, Manual Transmision
| 13***0Z | Bolt | 1 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 1 |
| 13***9Z | Screw, M10x35mm | 4 |
B1-5-8 Lens, Reversing
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 4 |
B1-16-4 Pads,Non Slip
| 15***95 | Pad, Non Slip | 1 |
| 92***01 | Pad, Anti-Slip | 3 |
B1-11-4 Fire Extinguisher, 2.5kg
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
B1-8-2 Tank, Fuel, & Mounting Step
| 13***06 | Bolt | 2 |
| 13***8Z | Bolt | 1 |
| 13***4Z | Screw | 4 |
B1-2-2 Bodywork, Engine
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***0Z | Bolt | 6 |
B1-3-4 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***8Z | Bolt | 4 |
B1-6-1 Tank, Hydraulic, & Battery Box
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***17 | Boss | 8 |
| 12***01 | Cover | 1 |
B1-8-3 Tank, Fuel, & Mounting Step
| 13***8Z | Bolt | 4 |
| 13***4Z | Screw | 2 |
| 13***0Z | Bolt | 1 |
B1-1-6 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-5-1 Fender, Rear, Left & Right Hand
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-8-1 Tank, Diesel Fuel, & Mounting Step
| 13***04 | Bolt | 2 |
| 13***06 | Bolt | 2 |
| 13***07 | Bolt | 4 |
B1-2-8 Engine Cover, Sealing
| 15***04 | Strip, Clamp | 1 |
| 15***05 | Seal, Strip, Bonnet | 1 |
| 15***33 | G.A. | 1 |
B1-13-1 Mounting, Raised Headlight, Right Hand
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
| 13***6Z | Bolt | 1 |
| 13***1Z | Bolt | 2 |
B1-16-3 Pads,Non Slip
| 15***00 | G.A. | 1 |
| 92***03 | Strip, Non Slip; Not Illustrated. Not Req'D In North America, Strip, Non Slip | 4 |
B1-1-3 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-5-2 Fender, Rear, Rubber, Left & Right Hand
| 13***8Z | Bolt | 14 |
| 13***1Z | Bolt, M12 X 45mm | 8 |
| 13***4Z | Nut | 14 |
B1-5-9 Mirrors, Rh Front Fender
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***3Z | Nut | 3 |
| 14***3Z | Washer | 1 |
B1-3-9 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 6 |
B1-3-3 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 2 |
B1-11-2 Fire Extinguisher, 2.5kg
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
| 13***0Z | Bolt | 1 |
| 13***3Z | Nut | 2 |
B1-5-5 Fender, Rear, Left & Right Hand
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-10-2 Guards, Propshaft, Manual Transmission, Suitable For Sway Machines
| 13***0Z | Bolt | 1 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 1 |
| 13***9Z | Screw, M10x35mm | 4 |
B1-1-7 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-14-2 Stabiliser, Installation
| 10***30 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***30 | Pin, Pivot | 2 |
B1-1-4 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-3-2 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 6 |
| 13***0Z | Bolt | 2 |
B1-12-4 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B1-16-1 Clamps, Pipe, Machine
| 82***15 | Plate, Cover M6 X 45mm, @ 33mm Crs | 1 |
| 82***16 | Base, Clamp, 25.4mm Hole, M6 X 33mm Crs | 1 |
| 82***17 | Clamp, Top, 25.4mm Hole, M6 X 33mm Crs | 1 |
B1-1-9 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-1-1 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-14-1 Stabiliser, Installation
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 2 |
| 10***33 | Pin, Pivot | 2 |
| 10***07 | Pin, Pivot 305 Long | 2 |
B1-3-8 Bodywork, Rear End, Sealing
| 15***01 | Strip, Vertical Mounting | 2 |
| 92***01 | Seal, Strip, 770mm Long | 2 |
| 92***02 | Seal, Strip, 360mm Long | 2 |
B1-12-5 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B1-12-2 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B1-10-3 Guards, Propshaft, Manual Transmission
| 13***0Z | Bolt | 1 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 1 |
| 13***0Z | Bolt, M12x40 | 8 |
B1-1-8 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-1-5 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-1-2 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis, Chassis; 525-58, 525-58 F.S. Not M567247 | 1 |
B1-6-6 Tank, Hydraulic, & Battery Box
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***77 | Cover | 1 |
| 12***71 | Padlock | 1 |
B1-3-5 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 6 |
B1-3-1 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***8Z | Bolt | 4 |
B1-4-1 Fender, Front, Right Hand
| 13***8Z | Bolt | 2 |
| 13***0Z | Bolt | 1 |
| 13***3Z | Nut | 3 |
B1-1-10 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis, Chassis; 525-58, 525-58 F.S. Also M567247 | 1 |
B1-2-3 Bodywork, Engine
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***0Z | Bolt | 6 |
B1-5-6 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 8 |
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
B1-6-7 Tank, Diesel Fuel, Hydraulic, Combined
| 10***01 | Gasket | 1 |
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
| 12***39 | Strainer, Fuel, Gauze | 1 |
B1-16-2 Pads,Non Slip
| 15***00 | Pad, Non Slip | 1 |
| 92***01 | Pad, Anti-Slip | 3 |
| 92***03 | Strip, Non Slip; Not Illustrated. Not Req'D In North America, Strip, Non Slip | 2 |
B1-11-1 Fire Extinguisher
| 13***03 | Nut | 2 |
| 14***02 | Screw, No.10 X 1/2" Long | 2 |
| 15***01 | Plate, Mounting | 1 |
B1-3-6 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 6 |
B1-12-1 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B1-11-3 Fire Extinguisher
| 13***3Z | Nut | 2 |
| 14***02 | Screw, No.10 X 1/2" Long | 2 |
| 15***03 | Plate, Mounting | 1 |
B1-5-7 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 8 |
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
B1-5-3 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 8 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-6-3 Battery Box & Step
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***4Z | Screw | 2 |
| 13***0Z | Bolt | 1 |
B2-9-1 Seat, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, 5/16" Unf | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B2-7-1 Panel, Instrument, Covers & Brackets,
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 5 |
| 13***8Z | Bolt | 8 |
B2-3-2 Windscreen, Hinged
| 12***08 | Bush, Hinge | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
| 14***9Z | Washer | 0 |
B2-7-4 Cover, Level Guage
| 15***01 | Cover, Blanking | 1 |
| 82***61 | Nut, M4 | 3 |
| 82***11 | Washer, M4'Starloc' | 3 |
B2-5-2 Mirror, Cab Mounted, Japan
| 12***00 | Bracket | 1 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
B2-3-1 Windscreen, Hinged
| 12***08 | Bush, Hinge | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B2-1-3 Cab Frame
| 12***02 | Plate, Compression | 4 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 6 |
B2-13-1 Blanking Plate, Gear Lever, For Use With Powershift
| 15***50 | Plate, Blanking | 1 |
| 15***49 | G.A. | 1 |
| 82***87 | Retainer, Scrivet; See Note 1. Break Plastic Screw And Fit 14***04, Retainer, Scrivet | 4 |
B2-4-1 Guards, Windscreen & Roof
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***8Z | Bolt | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
B2-12-1 Cab Cover
| 99***00 | Cab, Cover | 1 |
B2-10-1 Seat, Optional
| 40***00 | Seat, Fabric,Suspension, Bostrom Viking 301k | 1 |
| 40***02 | Kit-Seat Assembly, Fabric (Seat Only), Cover And Cushion; Nla Removed By San 14113.06/11***03.W Charles, For Cover Set, Use 40/91***81. | 1 |
| 40***00 | Seat, With Alarm | 1 |
B2-10-2 Seat Alarm, Installation
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
| 14***2Z | Washer | 1 |
B2-1-2 Cab Frame
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 6 |
B2-6-2 Cab Glazing
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 4 |
| 14***1Z | Washer | 4 |
B2-6-1 Cab Glazing
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 4 |
| 14***1Z | Washer | 4 |
B2-5-1 Mirror, Cab Mounted
| 12***00 | Mirror, With Bracket | 1 |
| 12***01 | Bracket | 1 |
| 13***2Z | Bolt | 2 |
B2-11-1 Visor, Sun, & Mirror, Rear View
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 13***3Z | Nut | 3 |
| 14***1Z | Washer, 2 Ba | 3 |
B2-2-1 Door & Components
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 2 |
| 12***08 | Bush, Hinge | 4 |
B2-6-4 Cab Glazing, Safety Frame
| 15***00 | Cab, Safety Frame, Tinted Roof Glass | 1 |
| 15***00 | Cab, Canopy/Safety Frame, Tinted Roof Glass, Cab, Canopy/Safety Frame, Tinted Roof Glass; Grey. Also M567180, M567194, M567208 & M567215 | 1 |
| 15***84 | Cab, Canopy/Safety Frame, Tinted Roof Glass; San 22250.Mss To 15***85,15***88 And, 15***89.Req R Salter 01/03***06 | 1 |
B2-7-3 Panel, Instrument, Covers & Brackets,
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 5 |
| 13***8Z | Bolt | 8 |
B2-1-7 Cab Shell
| 15***00 | Cab, Tinted Roof Glass; Use 15***03, San 03887 | 1 |
| 15***00 | Cab, Clear Roof Glass; Use 15***04, San 03887 | 1 |
| 15***00 | Cab, Canopy/Safety Frame, Tinted Roof Glass, Cab, Canopy/Safety Frame, Tinted Roof Glass; Grey. Also M567180, M567194, M567208 & M567215 | 1 |
B2-8-1 Mats & Fittings, Cab
| 12***05 | Cover, Dark Grey | 1 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 14***02 | Screw | 4 |
B2-7-2 Panel, Instrumemt, Covers & Brackets
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 5 |
| 13***8Z | Bolt | 8 |
B2-1-5 Cab Shell, Heavy/Duty
| 15***00 | Cab, Heavy Duty | 1 |
| 15***00 | Cab, Tinted Roof Glass | 1 |
| 15***00 | Cab, Clear Roof Glass | 1 |
B2-6-3 Cab Glazing, Safety Frame
| 15***00 | Cab, Safety Frame, Tinted Roof Glass | 1 |
| 15***00 | Cab, Canopy/Safety Frame, Tinted Roof Glass | 1 |
| 82***62 | Window, R.H Side | 1 |
B2-1-6 Cab Shell
| 15***00 | Hinge, Pin | 4 |
| 15***00 | Pin, Hinge | 1 |
| 15***00 | Pin, Hinge | 1 |
B2-1-1 Cab Frame
| 12***02 | Plate, Compression | 4 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 6 |
B2-9-4 Seat, Static Pvc, Canopy Build
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-1-4 Cab Shell, Standard
| 15***00 | Cab, W.A. | 1 |
| 15***00 | Cab, Tinted Roof Glass | 1 |
| 15***00 | Cab, Clear Roof Glass | 1 |
B2-9-5 Seat Belt, 3"
| 12***52 | Spacer | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 2 |
| 13***3Z | Nut, Lock | 2 |
B2-10-3 Seat, Suspension, Optional
| 40***02 | Damper | 1 |
| 40***00 | Seat, Vinyl,Suspension, Bostrom Viking 301k | 1 |
| 40***01 | Kit-Backrest, Vinyl | 1 |
B2-9-2 Seat, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B2-9-3 Seat, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B3-7-3 Pads, Boom Wear
| 13***8Z | Bolt, M12 X 30 | 34 |
| 13***0Z | Bolt, M12x40 | 8 |
| 13***1Z | Bolt, M12 X 45mm | 10 |
B3-1-2 Boom, Inner, Outer
| 12***19 | Bush, Spring | 2 |
| 13***6Z | Bolt | 3 |
| 13***03 | Nut | 4 |
B3-7-7 Pads, Boom Wear
| 13***8Z | Bolt, M12 X 30 | 12 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 8 |
| 13***0Z | Bolt, M12x40 | 8 |
B3-7-2 Pads, Boom Wear
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 30 | 34 |
| 13***0Z | Bolt, M12x40 | 8 |
B3-3-3 Pads, Boom Wear
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 12 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 6 |
B3-1-7 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***0Z | Bolt | 3 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
B3-3-1 Pads, Boom Wear
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 12 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 2 |
B3-9-1 Boom, Pivot Pin Location
| 10***25 | Pin, Pivot | 1 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 1 |
| 10***48 | Pin, Pivot | 2 |
B3-7-6 Pads, Boom Wear
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt, M12 X 30 | 22 |
| 13***0Z | Bolt, M12x40 | 12 |
B3-1-4 Boom, Inner, Intermediate & Outer
| 12***17 | Bush | 2 |
| 12***18 | Bush | 4 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 3 |
B3-1-3 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***0Z | Bolt | 3 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
B3-1-5 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***0Z | Bolt | 3 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
B3-7-1 Pads, Boom Wear
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 38 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 8 |
B3-7-10 Pads, Boom Wear., Nylacast
| 13***1Z | Bolt, M12 X 45mm | 7 |
| 13***7Z | Bolt, M12x25mm Long,Tuf-Lo, K | 20 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 22 |
B3-7-11 Pads,Boom Wear, Nylacast
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 26 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 4 |
| 13***0Z | Screw, Set M12 X 40 Tuf-Lok | 8 |
B3-7-5 Pads, Boom Wear
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt, M12 X 30 | 17 |
| 13***0Z | Bolt, M12x40 | 20 |
B3-7-8 Pads,Boom Wear., Nylacast
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 12 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 4 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 6 |
B3-7-4 Pads, Boom Wear
| 13***8Z | Bolt, M12 X 30 | 30 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***0Z | Bolt, M12x40 | 8 |
B3-4-1 Indicator, Boom Angle
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 14***4Z | Washer, Spring | 2 |
| 14***9Z | Washer | 1 |
B3-13-1 Guard, Trash
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B3-2-2 Boom, Pivot Pin Location
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 3 |
| 10***30 | Pin, Pivot | 2 |
| 10***43 | Pin, Pivot | 1 |
B3-8-1 Boom, Pivot Pin Location
| 10***25 | Pin, Pivot | 1 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 1 |
| 10***48 | Pin, Pivot | 2 |
B3-1-1 Boom, Inner, Outer
| 12***19 | Bush, Spring | 2 |
| 13***6Z | Bolt | 3 |
| 13***03 | Nut | 4 |
B3-3-5 Pads,Boom Wear, Nylacast
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 12 |
| 13***0Z | Screw, Set M12 X 40 Tuf-Lok | 8 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 6 |
B3-2-1 Boom, Pivot Pin Location
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 3 |
| 10***30 | Pin, Pivot | 2 |
| 10***43 | Pin, Pivot | 1 |
B3-7-9 Pads,Boom Wear, Nylacast
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 8 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 8 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 6 |
B3-1-10 Boom, Inner, Outer
| 12***19 | Bush, Spring | 2 |
| 13***6Z | Bolt | 3 |
| 13***03 | Nut | 4 |
B3-3-4 Pads, Boom Wear
| 13***8Z | Bolt, M12 X 30 | 12 |
| 13***0Z | Bolt, M12x40 | 8 |
| 13***1Z | Bolt, M12 X 45mm | 6 |
B3-1-8 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
B3-12-1 Guard, Trash, Inner Boom, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B3-3-2 Pads, Boom Wear
| 13***06 | Bolt | 8 |
| 13***08 | Bolt | 14 |
| 13***10 | Bolt | 20 |
B3-1-9 Boom, Inner, Outer
| 12***19 | Bush, Spring | 2 |
| 13***6Z | Bolt | 3 |
| 13***03 | Nut | 4 |
B3-6-1 Boom, Pivot Pin Location
| 10***10 | Pin, Pivot | 1 |
| 10***16 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
B3-11-1 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B3-10-1 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B3-14-1 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B3-1-6 Boom, Inner, Outer
| 12***17 | Bush | 2 |
| 12***18 | Bush | 4 |
| 13***6Z | Bolt | 6 |
B3-15-1 Intermediate Boom, Hose Guide/Tensioning Pulley System
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***0Z | Bolt, M12x40 | 2 |
B5-3-9 Decals, Revised Livery
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B5-5-11 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-2-3 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-5-3 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-2 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-4 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-2-4 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-5-15 Flip Chart, Mounting & Velcro, U.S.A Canopy Only
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
| 15***70 | Strap, Velcro | 1 |
| 15***94 | Mounting, Flip Chart | 1 |
B5-1-2 Paint History
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 1 |
| 42***05 | Paint, Gloss Yellow, 2.5 Lts | 1 |
B5-2-6 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-5-7 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-6 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-1-1 Paint
| 42***01 | Paint, Undercoat Grey, 5 Lts | 1 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 1 |
| 42***03 | Paint, Undercoat Grey, 2.5 Lts | 1 |
B5-3-1 Decals
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B5-7-1 Safety Strut
| 15***00 | Strut, Support Lift Ram | 1 |
| 15***00 | Clamp, Bolt | 1 |
| 82***11 | Strip, Edging | 2 |
B5-5-9 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-3-2 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-2-5 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-2-2 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-5-8 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-2-1 Decals
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B5-5-10 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-3-8 Decals, Revised Livery
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B5-3-5 Decal, Seat Belt Warning
| 33***44 | Label, Seat Belt Warning | 1 |
| 33***47 | Label, Warning, 'Use The Seat Belt' | 1 |
B5-10-1 Boom Restraint, Traffic
| 15***77 | Boom, Transport Restraint | 1 |
B5-6-1 Tool Kit
| 40***05 | Lubricant, Jcb Special Slide, 400g Cartridge | 1 |
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
B5-4-8 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-4-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-5 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B6-3-1 Homologation Parts, German
| 13***4Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
B6-2-1 Homologation Parts, German, Decals
| 81***59 | Label, Marker | 2 |
| 81***30 | Label, Hydraulic Oil, German | 1 |
| 81***31 | Label, Brake Fluid | 1 |
B6-1-1 Homologation Parts, German
| 12***01 | Strap | 2 |
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 4 |
C Electrics-Machine, Cab &, Engine
C1-4-1 Electrics, Trailer
| 13***3Z | Nut | 3 |
| 13***8Z | Bolt | 3 |
| 13***3Z | Nut | 3 |
C1-3-6 Instrument Cluster, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-16-2 Control Box, Remote, Servo Control
| 13***3Z | Nut | 4 |
| 14***9Z | Washer | 4 |
| 14***01 | Screw, No.6x3/8" Posiflange, Self Tapping | 4 |
C1-1-5 Electrical Layout, Place-Ace Control
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-10-1 Light, Combination, Rear
| 13***4Z | Bolt | 2 |
| 15***00 | Guard, Rear Light | 2 |
| 70***01 | Lens, Indicator | 1 |
C1-16-1 Control Box, Remote, Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***3Z | Nut | 6 |
| 14***1Z | Washer, Plain | 4 |
C1-10-3 Light, Combination, Rear
| 13***4Z | Bolt | 2 |
| 15***00 | Guard, Rear Light | 2 |
| 70***01 | Lens, Indicator | 1 |
C1-5-2 Indicator, Safe Load, (Boss Style)
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
C1-3-1 Instrument Cluster, All Territories
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
C1-18-1 Control Lever Unit
| 70***00 | Valve, Control, Remote | 2 |
| 70***01 | Knob; Use 70***03 Which Combines 70***01 &, 70***02 | 1 |
| 70***03 | Ring, Snap | 4 |
C1-1-16 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-2-8 Control, Dump
| 13***01 | Nut | 2 |
| 13***08 | Bolt | 2 |
| 14***07 | Washer | 2 |
C1-5-5 Indicator, Safe Load., (Transducer Style)
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw, No 8x1/2" | 2 |
| 70***00 | Box, S.L.I. Control, Pre Emc; See Note 4. Also Fitted To M567180,M567194,M567208, M567215,M567233,M567247, Box, S.L.I. Control, Pre Emc; See C1-5-5. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247, Box, S.L.I. Control, Pre Emc | 1 |
C1-15-1 Console, Cab, Servo Control
| 12***67 | Wire, Rope | 1 |
| 12***00 | Switch, Micro | 2 |
| 13***7Z | Screw | 2 |
C1-2-20 Instrument Panel, Relays, Powershift
| 13***3Z | Nut | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-3-2 Instrument Cluster
| 70***08 | Seal | 1 |
| 70***16 | Bulb, 12v 1.2w | 15 |
| 70***17 | Bulb, 12v 1.2w C/W Holder | 15 |
C1-6-4 Sensor,Steering, Front Axle
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***9Z | Screw, M10x35mm | 1 |
| 13***2Z | Nut, M8 | 1 |
C1-3-7 Instrument Cluster, 21 Kph, German
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C1-1-8 Electrical Layout
| 12***99 | Bracket, Mounting | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
C1-3-9 Instrument Cluster, 35 Kph, 'Farm Special Plus'
| 70***00 | Cluster, Instrument Panel, 38kph | 1 |
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
| 70***02 | Gauge, Tachometer | 1 |
C1-15-9 Console, Cab, Servo Control, Non-Remote, With 2nd Auxiliary & Sway
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 4 |
| 13***5Z | Capscrew, M6 X 20 | 4 |
C1-8-10 Light, Front
| 70***00 | Light, Sealed, Left Hand Dip | 2 |
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
C1-1-12 Electrical Layout
| 13***4Z | Bolt | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***1Z | Nut | 2 |
C1-7-2 Gauge, Level
| 70***00 | Gauge, Inclinometer | 1 |
| 70***00 | Guage, Inclinometer; Level Guage. Also M567180, M567194, M567208, M567215, M567233, M567247, Guage, Inclinometer | 1 |
| 81***57 | Spring | 3 |
C1-8-4 Light, Front
| 70***00 | Light, Sealed, Left Hand Dip | 2 |
| 70***00 | Light, R.H. Dip; Nla, See San05798 | 2 |
| 70***00 | Body, Head/Side Light; Use 70***00, San 04953 | 2 |
C1-17-1 Control Lever Unit, Cab Console, Servo Control
| 70***00 | Valve, Control | 1 |
| 70***01 | Lever | 1 |
| 70***02 | Gaiter | 1 |
C1-8-5 Guards, Front Light, Optional
| 14***09 | Screw, Self Tapper, M8 X 2" Long | 8 |
| 26***00 | Guard, Headlight/Indicator | 2 |
C1-1-3 Electrical Layout
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
C1-30-1 High Response Valves, Installation, Supplementary Fitment
| 13***4Z | Bolt | 2 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut | 2 |
C1-9-5 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-9-1 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-15-5 Console, Cab, Servo Control, Non-Remote, Standard
| 12***67 | Wire, Rope | 1 |
| 12***00 | Switch, Micro | 1 |
| 13***3Z | Nut | 1 |
C1-8-11 Light, Reversing, Japanese
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 14***1Z | Washer, Plain | 2 |
| 15***01 | Bracket, Mounting | 1 |
C1-2-10 Instrument Panel
| 12***80 | Bracket, Packhard Retaining | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 8 |
C1-15-10 Console, Cab, Servo Control, Non-Remote, With 1st Auxiliary & Sway
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 8 |
| 13***5Z | Capscrew, M6 X 20 | 8 |
C1-5-4 Indicator, Safe Load, Servo
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw, No 8x1/2" | 2 |
| 70***00 | Box, Indicator Control | 1 |
C1-2-5 Instrument Panel, Additional Relays, Basic Servo Machines
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B. Steer Mode | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-8-15 Light, Front, Lh Dip
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 1 |
C1-3-4 Instrument Cluster, 21 Kph, German
| 70***02 | Bezel | 1 |
| 70***03 | Glass | 1 |
| 70***04 | Seal | 1 |
C1-3-8 Instrument Cluster, 33 Kph
| 70***00 | Cluster, Instrument, 33 K.P.H. | 1 |
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
| 70***02 | Gauge, Tachometer | 1 |
C1-1-15 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
| 71***00 | Plug, Male, Junior Timer | 0 |
C1-7-4 Inclinometer, Lev-O-Gauge
| 15***00 | G.A., Inclinometer | 1 |
| 70***00 | Gauge, Inclinometer/Level | 1 |
C1-2-15 Instrument Panel, Relays
| 13***3Z | Nut | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-28-1 Dump Valve, 'High Response', Supplementary Fitment
| 13***3Z | Nut | 2 |
| 13***2Z | Screw, Cap, M5 X 50mm; Replaces Aev0030, San 12455 | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
C1-1-1 Electrical Layout
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
C1-7-3 Gauge, Level
| 15***00 | Bracket, Inclinometer | 1 |
| 70***00 | Guage, Inclinometer/Level | 1 |
| 71***10 | Fuse, 1 Amp, Fuse, 1 Amp; See Note 1 For Fuse Box Cover. Note 1,For Fuse Box Cover See Page B2-7-3, Fuse, 1 Amp; See Note 1 For Fuse Box Cover. Note 1,For Fuse Box Cover See Page B2-6-4 | 1 |
C1-8-1 Light, Front
| 70***00 | Light, Sealed, Left Hand Dip | 2 |
| 70***00 | Light, R.H. Dip; Nla, See San05798 | 2 |
| 70***01 | Lens | 1 |
C1-26-1 Air Conditioning
C1-10-2 Light, Combination, Rear, Fold Down
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt | 4 |
C1-6-1 Sensor, Steering
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
C1-8-9 Light, Reflector
| 14***02 | Screw, No 8x1/2" | 8 |
| 15***01 | Bracket, Reflector Mounting | 1 |
| 70***00 | Reflector, Amber | 4 |
C1-15-7 Console, Cab, Servo Control, Non-Remote, With 2nd Auxiliary
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 8 |
| 13***5Z | Capscrew, M6 X 20 | 8 |
C1-9-4 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-15-12 Console, Cab, Servo Control, Non-Remote, With 1st Aux & Hitch
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 8 |
| 13***5Z | Capscrew, M6 X 20 | 8 |
C1-8-13 Light, Number Plate
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
C1-25-1 Control Unit, Motion Pack, & Mounting
| 13***0Z | Bolt | 3 |
| 14***3Z | Washer | 3 |
| 15***00 | Bracket | 1 |
C1-6-5 Sensor,Steering, Rear Axle
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***2Z | Nut, M8 | 1 |
C1-19-1 Cable Guide, Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 8 |
| 13***0Z | Bolt | 4 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 2 |
C1-8-16 Light, Front, Rh Dip
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Right Hand Dip | 1 |
C1-5-3 Indicator, Safe Load
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
C1-1-7 Electrical Layout, Place-Ace Control
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-1-2 Electrical Layout
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
C1-8-14 Light, Reflector
| 14***02 | Screw, No 8x1/2" | 5 |
| 15***00 | G.A. | 1 |
| 15***01 | Bracket | 1 |
C1-2-4 Instrument Panel, Additional Relays, Servo Remote Machines
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B. Steer Mode | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-2-9 Control, Dump
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | Pedal, Dump | 1 |
C1-11-5 Switch, Column, Powershift, Transmission
| 13***03 | Screw, Cap | 2 |
| 70***02 | Switch, Right Hand Handle | 1 |
| 70***00 | Switch, Column, Powershift; Replaced By 70***00, See San05831 | 1 |
C1-12-1 Transmitter, Speed
| 13***2Z | Nut | 1 |
| 24***01 | O Ring | 1 |
| 44***05 | Washer, Seating | 1 |
C1-15-8 Electrical Layout, Servo Control, Non-Remote
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 5 |
| 70***00 | Tape, Self-Amalgamating | 0 |
| 71***00 | Relay, Mini, 12v | 1 |
C1-1-6 Electrical Layout, Place-Ace Control
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-3-3 Instrument Cluster, 33 Kph
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
C1-13-2 Isolator, Battery
| 13***6Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 4 |
C1-21-1 Cable Guide, Remote Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 16 |
| 13***8Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
C1-8-8 Light, Front
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 36 |
| 13***4Z | Bolt | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
C1-15-3 Console, Cab
| 13***5Z | Bolt | 12 |
| 13***3Z | Nut | 4 |
| 13***3Z | Nut, Self Lock, M6 | 12 |
C1-15-6 Console, Cab, Servo Control, Non-Remote, With 1st Auxiliary
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 12 |
| 13***5Z | Capscrew, M6 X 20 | 12 |
C1-40-1 Boom Float Electrics, (Return To Dig)
| 70***47 | Decal, Float Switch | 1 |
| 70***00 | Microswitch | 1 |
| 70***00 | Switch, Rocker | 1 |
C1-9-2 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-20-1 Cable Guide, Remote Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 16 |
| 13***8Z | Bolt | 4 |
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 1 |
C1-8-2 Light,Front
| 15***00 | Light, Unit, 12 Volt, Rh Dip | 1 |
| 26***00 | Light, Assembly, R.H.Dip | 1 |
| 33***88 | Light, Assembly, L.H.Dip; Replacement Assembly For 70***00 Lh Dip Complet, E With Headlight Unit | 1 |
C1-17-4 Control Lever Unit, Cab Console, Servo Control, Non-Remote
| 12***00 | Switch, Micro | 1 |
| 13***03 | Screw, Grub M5 X 10 Long | 4 |
| 15***04 | Clamp, Stalk Bottom | 1 |
C1-5-1 Indicator, Safe Load
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
C1-25-3 Control Unit, Motion Pack, & Mounting
| 13***0Z | Bolt | 3 |
| 14***3Z | Washer | 3 |
| 15***00 | Bracket | 1 |
C1-1-11 Electrical Layout
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Screw, M6x16 | 2 |
C1-2-7 Instrument Panel, & Cab Harness
| 12***80 | Bracket, Packhard Retaining | 1 |
| 13***2Z | Bolt | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
C1-25-2 Control Unit, Motion Pack, & Mounting
| 13***0Z | Bolt | 3 |
| 14***3Z | Washer | 3 |
| 15***00 | Bracket | 1 |
C1-2-6 Instrument Panel, Relays
| 13***3Z | Nut | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-15-4 Console, Cab
| 13***5Z | Bolt | 12 |
| 13***3Z | Nut | 12 |
| 13***3Z | Nut, Self Lock, M6 | 12 |
C1-8-17 Light, Head Rh Dip
| 24***13 | Grommet, 32mm Dia | 2 |
| 70***00 | Light, Unit, Right Hand Dip | 2 |
| 70***00 | Body, Headlight | 2 |
C1-6-2 Sensor, Steering
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Nut, M8 | 2 |
C1-24-1 Sensor, Boom Angle
| 13***8Z | Bolt | 2 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 4 |
C1-1-4 Electrical Layout, Servo Control
| 14***01 | Screw, Self Tapping | 2 |
| 15***00 | Bracket, Servo Relay | 1 |
| 15***00 | Bracket, Servo Relay | 1 |
C1-17-5 Control Lever Unit, 3 Axis
| 70***00 | Valve, Control Assembly, 3 Axis Joystick | 1 |
C1-11-1 Switch, Column
| 13***3Z | Capscrew | 2 |
| 14***1Z | Washer, Plain | 2 |
| 15***00 | Lock, Lever | 1 |
C1-8-12 Light, Front, Japan
| 15***01 | Body, Headlight L.H.; S/Sd To 70***00 Lamp.15***01 Nla From Sup, Plier.Only 30p More For Cpt Unit.San 14468 | 1 |
| 15***01 | Body, Headlight R.H.; Superseded To 70***00. San 12619 S Shenton | 1 |
| 24***05 | Grommet, Blind,Hole Dia 12.7mm, Panel Thkness 2-3mm | 2 |
C1-3-5 Instrument Cluster, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-1-10 Electrical Layout
| 12***99 | Bracket, Mounting | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
C1-2-25 Control, Dump
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | G.A. | 1 |
C1-7-1 Gauge, Level
| 70***00 | Gauge, Inclinometer | 1 |
| 70***00 | Guage, Inclinometer; Level Guage. Also M567180, M567194, M567208, M567215, M567233, M567247, Guage, Inclinometer | 1 |
| 81***57 | Spring | 3 |
C1-17-2 Control Lever Unit, Single Axis
| 70***00 | Valve, Control Assembly, Single Axis Joystick | 1 |
C1-1-13 Electrical Layout
| 13***4Z | Bolt | 1 |
| 13***2Z | Bolt | 1 |
| 13***3Z | Screw, M6x16 | 2 |
C1-15-2 Console, Cab
| 13***5Z | Bolt | 12 |
| 13***3Z | Nut | 12 |
| 13***3Z | Nut, Self Lock, M6 | 12 |
C1-8-6 Light, Working, Boom
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 1 |
| 13***1Z | Nut | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
C1-1-9 Electrical Layout
| 12***99 | Bracket, Mounting | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
C1-29-1 High Response Valves, Installation, Supplementary Fitment
| 13***4Z | Bolt | 2 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut | 2 |
C1-9-3 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-2-1 Instrument Panel
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut | 9 |
C1-8-3 Light, Indicator, Side
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 24***02 | Grommet | 1 |
| 70***00 | Light, Side Repeater | 1 |
C1-24-2 Sensor, Boom Angle
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C1-15-11 Console, Cab, Servo Control, Non-Remote, With 2nd Aux & Hitch
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 4 |
| 13***5Z | Capscrew, M6 X 20 | 4 |
C1-22-1 Drum Reel Assembly
| 15***00 | Drum | 1 |
| 15***01 | Screw, C/W Washer | 1 |
| 15***02 | Seal, Cover | 1 |
C1-14-1 Electrics, Stabiliser
| 14***02 | Washer | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 10 |
| 70***00 | Holder, Warning Light | 1 |
C1-2-3 Instrument Panel, Relays
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B. Steer Mode | 1 |
| 71***00 | Relay, Mini, 12v | 3 |
C1-23-1 Sensor, Vehicle Attitude
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 15***00 | Bracket | 1 |
| 15***00 | Bracket | 1 |
C1-27-1 Alarm, Reverse
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-13-1 Isolator, Battery
| 13***6Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 4 |
C1-6-3 Sensor, Steering
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Nut, M8 | 2 |
C1-17-3 Control Lever Unit, 3 Axis
| 70***00 | Valve, Control Assembly, 3 Axis Joystick | 1 |
C1-2-2 Instrument Panel
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut | 4 |
C2-3-2 Alternator, Sealed, A127m-55amp 12.Volt, Optional
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***00 | Alternator, 12volt-55amp Sealed | 1 |
| 71***01 | Capacitor, Suppression-Positive | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-3-1 Alternator, A127-65amp 12.Volt
| 71***00 | Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator, Alternator; Lucas Ref. 24158. Type Of Alternator Best Identified By Lucas Ref, Stamped On Body. | 1 |
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
C2-5-1 Motor, Starter, M127 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-3-6 Alternator, 12volt - 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
C2-4-2 Alternator Mountings, 85amp, Optional
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-1-1 Electrical Equipment
| 02***23 | Switch, Oil Pressure | 1 |
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor; Used With Item 1a. May Also Be Used As Alternative With Item 1, See Note 2., Switch, Vacuum Sensor, Switch, Vacuum Sensor; Used With Item 1a. May Be Used As Alternative With Item 1, Also See Note 2. | 1 |
C2-3-4 Alternator, 12volt - 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***00 | Alternator, 85amp | 1 |
C2-3-3 Alternator, A127-65amp 12.Volt
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***05 | Rectifier | 1 |
C3-12-2 Condenser, Installation
| 15***81 | 11" Fan & Motor | 1 |
| 15***08 | Kit, Condenser Box | 1 |
| 70***00 | Switch, Binary | 1 |
C3-3-1 Motor, Wiper, Rear Window,Fixed
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-2-1 Motor, Wiper, Hinged Windscreen
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
| 14***02 | Screw | 2 |
C3-12-5 Hoses, Air-Con Installation
| 99***04 | Hose, Assembly | 1 |
| 99***74 | Hose, Air Con, Evap/Rec Drier | 1 |
| 99***75 | Hose, Air Con, Evap/Compressor | 1 |
C3-9-1 Radio, Optional
| 70***00 | Lead, Supply | 1 |
| 70***00 | Harness, Earth | 1 |
| 71***00 | Aerial | 1 |
C3-8-1 Light, Working, Cab Mounted
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 70***00 | Light, Auxiliary Working | 2 |
| 70***00 | Light, Auxiliary Working; Use 70***00 For L.H.,Use 70***00 For R.H., San 04229 | 2 |
C3-12-3 Evaporator, Installation
| 14***11 | Washer | 2 |
| 15***07 | Kit, Evaporator Box | 1 |
| 24***09 | Grommet | 1 |
C3-10-1 Circuit, Interior Light, Installation
| 70***00 | Light, Interior | 1 |
| 71***00 | Harness, Cab | 1 |
| 71***00 | Harness, Cab Roof & Beacon | 1 |
C3-10-2 Face Level Fan, Installation
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 5 |
| 71***06 | Fuse, 15 Amp, Fuse, 15 Amp; C3 - Thermostart. On Fastrac 185ti From M636--- - Provides Ether Start Circuit Protection. | 1 |
| 71***00 | Fan, 12 Volt; Replaced By 71***40, See San 10523 | 1 |
C3-9-2 Radio, Optional
| 71***00 | Aerial | 1 |
| 71***00 | Speaker, Loud, Set | 1 |
| 71***00 | Lead, Aerial Extension | 1 |
C3-5-4 Light,Beacon,Hazard, Warning
| 70***00 | Beacon, Amber, Strobe, 12v | 1 |
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C3-12-1 Air Conditioning, Installation
| 15***06 | Kit, Compressor | 1 |
| 15***07 | Kit, Evaporator Box | 1 |
| 15***08 | Kit, Condenser Box | 1 |
C3-11-1 Face Level Fan, Installation
| 15***78 | G.A. | 1 |
| 15***02 | G.A. | 1 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 5 |
C3-12-4 Hoses, Air Con-Installation
| 99***04 | Hose, Assembly | 1 |
| 99***00 | Hose, Assembly Air Con | 1 |
| 99***00 | Hose, Assembly Air Con | 1 |
C3-6-1 Heater Assembly
| 15***00 | Heater, Assembly | 1 |
| 15***00 | Heater, Assembly 12v | 1 |
| 15***01 | Motor, 12 Volt | 1 |
C3-5-3 Light Beacon, Strobe Light, Installation
| 13***3Z | Nut | 4 |
| 15***56 | Plate, Mounting | 1 |
| 15***79 | G.A. | 1 |
C3-2-2 Motor, Wiper, Fixed Windscreen
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
| 14***02 | Screw | 2 |
C3-7-2 Heater, Installation
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 13***2Z | Bolt | 5 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
C3-4-1 Motor, Wiper, Roof Window
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-7-1 Heater, Installation
| 13***2Z | Bolt | 5 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
| 13***3Z | Nut | 1 |
C3-5-1 Light, Beacon, Hazard Warning, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Magnetic, (Amber) | 1 |
| 70***01 | Lens, Amber, 146mm Dia | 1 |
C3-3-2 Motor,Wiper,Opening, Rear Window
| 14***02 | Screw | 1 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-11-2 Face Level Fan, Installation
| 13***2Z | Bolt | 2 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut | 2 |
C3-5-2 Light, Beacon, Hazard Warning, Yellow, Italian
| 13***3Z | Nut | 4 |
| 14***1Z | Washer, Plain | 4 |
| 15***00 | Beacon | 1 |
D Controls-Machine,Engine &, Steering
D1-4-3 Lever Lock, Valve Control Tilt
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
D1-1-2 Control, Dump, Transmission
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | Pedal, Dump | 1 |
D1-4-5 Lever Lock, Valve Controls, Dual Function Lever Control (Option)
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
D1-1-3 Control, Dump, Transmission
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | G.A. | 1 |
D1-3-1 Gear Lever
| 12***04 | Knob | 1 |
| 13***2Z | Bolt | 1 |
| 13***8Z | Bolt | 1 |
D1-10-1 Valve Control Levers, (Return To Dig), Usa 505-19'S Only
| 13***0Z | Bolt | 2 |
| 13***2Z | Bolt | 1 |
| 13***0Z | Bolt | 2 |
D1-5-5 Control, Levers, Valve, Dual Function Lever Control (Option)
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
D1-5-2 Control, Levers, Valve
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
D1-2-2 Control,, Parking Brake
| 13***4Z | Bolt, 3/8"Unf X 2" | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut | 2 |
D1-2-1 Control, Parking Brake
| 13***4Z | Bolt, 3/8"Unf X 2" | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut | 2 |
D1-4-4 Lever Lock, Valve Controls, Dual Function Lever Control (Option)
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
D1-4-2 Lever Lock, Valve Controls
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
D1-4-1 Lever Lock, Valve Controls
| 15***00 | Bracket | 4 |
| 15***00 | Plate, Lock | 2 |
| 15***00 | Bracket, Lock | 1 |
D1-4-6 Lever Lock,, Control Tilt.
| 15***52 | Plate, Gaiter | 1 |
| 15***53 | Plate, Lock | 1 |
| 15***19 | Lock, Tilt Lever A.B.I. | 1 |
D1-6-1 Control, Lever, Manual, 2/4wd
| 12***04 | Knob | 1 |
| 12***7P | Bracket, 2wd/4wd Cable, Control | 1 |
| 13***0Z | Bolt | 1 |
D1-7-1 Valve Control,Levers, Lift/Tilt, Aux1,Extn, Dual Function Lever Control (Option)
| 11***16 | Joint, Universal | 1 |
| 12***01 | Knob | 1 |
| 12***17 | Boss | 1 |
D1-5-1 Control, Levers, Valve
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
D1-1-1 Control, Dump, Transmission
| 13***01 | Nut | 2 |
| 13***08 | Bolt | 2 |
| 14***07 | Washer | 2 |
D1-8-1 Valve Control,Levers, Lift/Tilt, Aux1,Extn, Dual Function Lever Control (Option)
| 11***16 | Joint, Universal | 1 |
| 12***01 | Knob | 1 |
| 12***17 | Boss | 1 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 02***17 | Spring | 1 |
D2-2-1 Control, Throttle, Servo Build
| 13***3Z | Nut | 3 |
| 13***4Z | Screw | 3 |
| 14***1Z | Washer, 2 Ba | 3 |
D3-2-2 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
D3-1-2 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
D3-2-3 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
D3-2-4 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
D3-1-1 Steering Column
| 11***03 | Clip | 4 |
| 11***08 | Cover | 1 |
| 11***22 | Wheel, Steering; Part Is Mss Use The Following 12***00, 123/, 03842, 12***45. See San03769 | 1 |
D3-2-1 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
E Hydraulics Including Steering
E1-3-4 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 14***19 | Seal, Dowty | 2 |
E1-6-4 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly Lh | 1 |
E1-1-19 Circuit,Neutral,, Anti-Cavitation,, Servo Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
E1-4-4 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
E1-1-8 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-10-6 Circuit, Sway Hydraulics
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
E1-1-13 Main Hydraulics., Anti-Cav Servo +, Farm Special Plus
| 02***37 | Gasket | 1 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***7Z | Bolt, M8 X75mm Long | 1 |
E1-1-6 Circuit, Neutral
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***26 | Washer, Seal | 2 |
E1-10-5 Circuit, Sway Hydraulics
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
E1-5-3 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
E1-13-1 Circuit, Sideshift Carriage
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
E1-8-2 Circuit, Tow Hitch
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
| 15***02 | Ring, Sealing | 2 |
| 15***00 | G.A. | 1 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-2-1 Circuit, Lift End
| 13***8Z | Bolt | 2 |
| 13***03 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
E1-6-5 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Pipe, Assembly Lh | 1 |
E1-7-4 Circuit, 2nd Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly | 1 |
E1-7-3 Circuit, 2nd Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly L.H | 1 |
E1-2-2 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 14***19 | Seal, Dowty | 2 |
E1-4-5 Circuit, Steering
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***4Z | Bolt, 3/8" | 3 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
E1-10-2 Circuit, Sway Hydraulics
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
E1-1-4 Circuit, Neutral, Anti-Cavitation, Servo Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-8-1 Circuit, Tow Hitch
| 13***04 | Nut | 1 |
| 13***3Z | Nut | 2 |
| 13***6Z | Bolt | 2 |
E1-12-4 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E1-1-9 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-12-1 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E1-3-3 Circuit, Lift End
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
| 15***01 | Adapter, Banjo | 2 |
| 15***01 | Pipe, Assembly | 1 |
E1-1-1 Circuit, Neutral
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-10-1 Circuit, Sway Hydraulics
| 14***11 | Seal, Bonded | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | G.A. | 1 |
E1-3-2 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
| 14***19 | Seal, Dowty | 2 |
E1-1-10 Circuit, Neutral, Anti-Cavitation, Servo Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-9-1 Circuit, Remote Greasing, Rear
| 14***01 | Washer, Aluminium | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 3 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
E1-14-1 Circuit, Auxiliary, Pressure Relief, Servo
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***01 | Bracket, Ball Valve | 1 |
E1-11-3 Circuit, Stabiliser
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
E1-3-5 Circuit, Lift End, With 1st Auxiliary
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
| 15***00 | Pipe, Assembly | 1 |
E1-3-7 Circuit, Lift End
| 14***21 | Seal, Bonded 3/4" Bsp | 10 |
| 15***00 | Pipe, Assembly | 1 |
| 15***00 | Pipe, Assembly | 1 |
E1-1-3 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-1-18 Hydraulics, G.A., Farm Special Plus
| 02***37 | Gasket | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
E1-3-6 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***19 | Seal, Dowty | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 12 |
E1-6-1 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-6-3 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-1-15 Circuit, Neutral, 506-36 With Up-Lift, Servo Control With Auxiliary Pump
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 6 |
E1-11-2 Circuit, Stabiliser
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 6 |
E1-11-1 Circuit, Stabiliser
| 13***7Z | Bolt | 2 |
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
E1-4-3 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-1-14 Main Hydraulics, Anti Cavitation, Valve
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
E1-6-2 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-10-3 Circuit, Sway Hydraulics
| 14***11 | Seal, Bonded | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Bracket, Hose Guide | 1 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-15-1 Circuit, Auxiliary, Optional, For Use With Hydrapower Attachments
| 13***08 | Bolt | 3 |
| 13***22 | Bolt | 4 |
| 13***03 | Nut | 7 |
E1-3-9 Valve Link Assembly
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 15***01 | Adapter, Banjo | 2 |
| 15***05 | Pipe, Assembly | 1 |
E1-1-7 Circuit, Neutral, Anti-Cavitation, Servo Control
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***16 | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 1 |
E1-2-3 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***19 | Seal, Dowty | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 6 |
E1-1-17 Additional Pump, Installation, 'Farm Special Plus'
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Suction; Use 15***53, See T.I. 5/???, B??? N.America, San 04526, For Use With 'Farm Special Plus'. For Extra Circuitry & Additional Pump Installation, See Frame E1-1-17, Pipe, Suction; Use 15***53, See T.I. 5/???, B??? N.America, San 04526 | 1 |
E1-4-2 Circuit, Steering
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-1-5 Circuit, Neutral, Anti-Cavitation
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***16 | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 1 |
E1-4-1 Circuit, Steering
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-11-4 Circuit, Stabiliser
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 6 |
E1-6-6 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 1 |
E1-1-16 Auxiliary Pump, 506-36 With Up-Lift, Installation
| 12***06 | Cover, Solenoid | 1 |
| 13***0Z | Bolt, M12x40 | 2 |
| 15***00 | Bracket, Auxiliary Pump | 1 |
E1-7-2 Circuit, 2nd Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly | 1 |
E1-10-4 Circuit, Sway Hydraulics
| 14***11 | Seal, Bonded | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 5 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
E1-5-1 Circuit, Steering
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-7-1 Circuit, 2nd Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly | 1 |
E1-6-7 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-12-3 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E1-12-2 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E1-1-2 Circuit, Neutral
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-5-2 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-1-11 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-14-2 Circuit, Auxiliary, Pressure Relief, Servo
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***01 | Bracket, Ball Valve | 1 |
| 16***04 | Adapter | 1 |
E1-3-1 Circuit, Lift End
| 13***8Z | Bolt | 2 |
| 13***03 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
E1-1-12 Hydraulics, G.A. Servo., Farm Special Plus.
| 02***37 | Gasket | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***7Z | Bolt, M8 X75mm Long | 1 |
E2-8-1 Hydraulic Pump, Engine Mounted
| 02***35 | Gasket | 1 |
| 02***51 | Stud | 1 |
| 02***58 | Nut | 1 |
E2-3-1 Pump, Steering, & Fan Drive
| 20***29 | Washer; Replaced By 20/20***01 | 1 |
| 20***08 | Cap | 1 |
| 20***02 | Dowel | 6 |
E2-2-2 Pump, Main Hydraulic, Fittings & Mountings
| 13***4Z | Bolt | 2 |
| 13***0Z | Bolt, M16 X 40mm | 1 |
| 13***1Z | Bolt, M16 X 220mm | 2 |
E2-2-1 Pump, Main Hydraulic, Fittings & Mountings
| 13***08 | Bolt | 4 |
| 13***10 | Bolt | 2 |
| 13***03 | Nut | 2 |
E2-4-1 Pump, Steering, & Fan Drive, Adapters & Drive Gear
| 12***75 | Gear, Helical 16 Teeth | 1 |
| 13***02 | Nut | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
E2-5-1 Motor, Fan Drive
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 3 |
| 20***00 | Motor; 20/20***00 N/A Use 20/20***00. Housing Stamped Tfu 200/8 | 1 |
E2-6-1 Motor, Fan Drive, Installation
| 13***7Z | Capscrew | 2 |
| 13***12 | Capscrew | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 3 |
E2-2-4 Pump, Main Hydraulic, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***2Z | Bolt | 4 |
E2-1-1 Pump, Main Hydraulic
| 20***00 | Pump, Hydraulic - 40litre, 40l-27691; Use 20/90***00 & Coupling 15***04 | 1 |
| 20***01 | Gear, Set | 1 |
| 20***03 | Key; Replaced By 20/20***06, See San05154 | 1 |
E2-1-3 Pump, Main Hydraulic
| 20***00 | Pump | 1 |
| 20***01 | Kit-Seal, 40l Pump | 1 |
| 20***02 | Kit, Nut, Washer & Key | 1 |
E2-6-2 Motor, Fan Drive, Installation
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E2-5-3 Motor, Fan Drive
| 20***01 | Kit-Seal, Fan Motor | 1 |
| 20***00 | Motor, Fan, With Adjustable Rv. | 1 |
| 20***01 | Kit, Releif Valve; San23518.Ss To 20/95***34.P Gamble 22/05***07, Ref D Allison And J Coleman(Parker) | 1 |
E2-2-3 Pump, Main Hydraulic, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 2 |
| 13***4Z | Bolt | 2 |
E2-3-3 Pump, Steering, & Fan Drive
| 12***75 | Gear, Helical 16 Teeth | 1 |
| 13***7Z | Capscrew, Socket Head | 2 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
E2-6-3 Motor, Fan Drive, Installation
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E2-7-1 Additional Pump, Installation, 'Farm Special Plus'
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Suction; Use 15***53, See T.I. 5/???, B??? N.America, San 04526, For Use With 'Farm Special Plus'. For Extra Circuitry & Additional Pump Installation, See Frame E1-1-17, Pipe, Suction; Use 15***53, See T.I. 5/???, B??? N.America, San 04526 | 1 |
E2-1-2 Pump, Main Hydraulic
| 15***55 | Pipe, Feed Pump W/A | 1 |
| 16***10 | Adapter, Includes 'O'Ring | 1 |
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
E2-5-2 Motor, Fan Drive
| 20***00 | Motor, Fan; Ultra Pump. For 'Farm Special Plus' Machines, Refer To Ti 5/85 , See Then Frame E2-5-3, Motor, Fan | 1 |
| 20***01 | Kit-Seal, Fan Motor | 1 |
| 20***02 | Kit, Releif Valve | 1 |
E2-3-2 Pump, Steering, & Fan Drive
| 20***00 | Pump, Steer/Fan | 1 |
| 20***01 | Kit-Seal | 1 |
| 20***02 | Pump, Front Replacement | 1 |
E2-4-2 Pump, Steering, & Fan Drive, Adapters & Drive Gear
| 12***75 | Gear, Helical 16 Teeth | 1 |
| 13***02 | Nut | 1 |
| 15***09 | G.A. | 1 |
E3-7-2 Valve, Steering
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 4 |
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
E3-20-3 Valve, Section
| 25***07 | Kit, End Plug | 1 |
| 25***10 | Plug, Compensator | 1 |
| 25***11 | Kit-Shim, Compensator | 1 |
E3-20-1 Valve, Assembly
| 14***11 | Seal, Bonded | 4 |
| 16***02 | Adapter, 1/4" Bsp M/M | 4 |
| 25***00 | Restrictor | 2 |
E3-15-4 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Proportional, 6-Spool/Stabiliser | 1 |
| 25***00 | Valve, Proportional 7-Spool, With Sway/Stabiliser | 1 |
| 25***00 | Valve, 5 Spool | 1 |
E3-35-1 Valve Components, Auxiliary, For Use With Hydrapower Attachments
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 2 |
| 25***00 | Valve, Auxiliary | 1 |
| 25***13 | Kit, Stud, One Section | 3 |
E3-3-1 Valve, Section, Components & Levers
| 13***2Z | Nut | 4 |
| 25***27 | Plate, Seal Retainer | 12 |
| 25***30 | Seat, Spring | 12 |
E3-1-5 Valve, Assembly
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
| 25***0A | Valve, Main Relief, 3200 Psi | 1 |
E3-1-8 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***24 | Bracket, Support | 1 |
| 25***06 | Washer, Seal | 1 |
E3-2-1 Valve, Components
| 25***09 | Washer | 2 |
| 25***01 | Rod, Tie | 1 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
E3-5-1 Filter, Hydraulic
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***29 | Seal, Dowty | 2 |
E3-1-3 Valve, Assembly, 5 Spool
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
| 25***0B | Valve, Main Relief, 3500 Psi | 1 |
E3-1-9 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***04 | Plate, Valve Top | 1 |
| 25***06 | Washer, Seal | 1 |
E3-8-1 Valve, Shock, Steering
| 35***00 | Valve, Complete | 1 |
| 35***02 | Valve, Assembly, Shock | 1 |
| 35***03 | Kit-Service | 1 |
E3-6-8 Valve, Steering Mode
| 12***86 | Block | 1 |
| 12***00 | Valve, Assembly, Steer Mode; San 13973. Ref P Bratt & P Gamble. See Pi L98, /130b.See San 22291. | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
E3-6-4 Valve, Steering Mode
| 12***98 | Block | 1 |
| 12***80 | Bracket, Packhard Retaining | 2 |
| 12***81 | Spacer | 2 |
E3-7-1 Valve, Steering, Standard
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***04 | Bearing, Front | 1 |
| 35***05 | Bearing; Use 35/40***04 | 1 |
E3-21-1 Solenoid Valve, Return To Dig
| 25***00 | Valve, Solenoid | 1 |
E3-1-1 Valve, Assembly
| 25***00 | Valve, Assembly, L,E,A1,T; Same As 25/94***00 But Supplier Has Issue, Raised Their Drg..See Pi L96/151 | 1 |
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
E3-18-1 Valve, Sections, Operating, Proportional Servo
| 13***2Z | Nut, M8 | 0 |
| 15***01 | Lever, Manual Override; Replaced By Nla, See San 12236 Manufacture Drc | 0 |
| 15***01 | Lever, Manual Override | 0 |
E3-6-6 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***1Z | Nut | 2 |
E3-20-5 Valve, Section, Inlet, Pressure Compensating
| 25***15 | Plug | 1 |
| 25***29 | Spring, Guide | 1 |
| 25***30 | Spring | 1 |
E3-6-1 Valve, Steering Mode, & Mounting
| 13***10 | Bolt | 2 |
| 13***03 | Nut | 2 |
| 13***03 | Nut | 4 |
E3-2-3 Valve, Components, Extended
| 25***05 | Kit-Tie Rod, 4 Spool, Extended | 1 |
| 25***06 | Kit, Tie Rod, 5 Spool, Extended | 1 |
| 25***07 | Kit, Tie Rod, 6 Spool, Extended | 1 |
E3-15-3 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Proportional, 6-Spool/Stabiliser | 1 |
| 25***00 | Valve, Proportional, 5-Spool With Sway | 1 |
| 25***00 | Valve, Proportional, 6-Spool With Sway | 1 |
E3-1-7 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***04 | Plate, Valve Top | 1 |
| 25***00 | Valve, Assembly, L,E,A1,T,H/Hitch; Same As 25/96***00 But Supplier Issue Raised, Their Part No.See Pi L96/151 | 1 |
E3-36-1 Valve Section, Auxiliary, For Use With Hydrapower Attachments
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 1 |
| 25***08 | Kit-Repair, Check Valve | 2 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
E3-30-1 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***01 | Element, 25 Micron | 1 |
E3-5-2 Filter, Hydraulic
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***29 | Seal, Dowty | 2 |
E3-1-10 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***04 | Plate, Valve Top | 1 |
| 25***06 | Washer, Seal | 1 |
E3-2-2 Valve, Components
| 25***09 | Washer | 2 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
| 25***06 | Nut | 6 |
E3-20-4 Valve, Section, Inlet
| 25***06 | Plug, Sae | 2 |
| 25***26 | Valve, Load Sensing Inlet, Assembly | 1 |
| 25***27 | Spool, Pilot Reducing | 1 |
E3-5-4 Filter, Hydraulic
| 13***0Z | Bolt | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***7Z | Washer, Spring | 2 |
E3-7-4 Valve, Steering, German & Optional
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 4 |
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
E3-19-1 Valve Mountings, With Levers, Proportional Servo Control
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E3-2-4 Valve, Components, Standard
| 25***02 | Kit, Tie Rod, Standard, 4 Spool | 1 |
| 25***03 | Kit, Tie Rod, Standard, 5 Spool | 1 |
| 25***04 | Kit, Tie Rod, Standard, 6 Spool | 1 |
E3-7-3 Valve, Steering, German
| 35***02 | Kit-Repair | 1 |
| 35***00 | Valve, Steering, Integral Shock | 1 |
E3-15-2 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Proportional, 5-Spool With Sway | 1 |
| 25***00 | Valve, Proportional, 4-Spool | 1 |
| 25***00 | Valve, Proportional, 5-Spool | 1 |
E3-17-1 Valve, Section, Main Components, Proportional Servo
| 25***01 | Spool, Assembly | 1 |
| 25***02 | Valve, Shock, Anti-Cavitation | 1 |
| 25***22 | Body, C/W Check Valve, Body, C/W Check Valve; Auxiliary 1 & 2. Consists Of Item 1 & 8 Only | 0 |
E3-15-1 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Proportional, 5-Spool With Sway | 1 |
| 25***00 | Valve, Proportional, 4-Spool | 1 |
| 25***00 | Valve, Proportional, 5-Spool | 1 |
E3-20-6 Valve, Relief, Auxiliary
| 25***07 | Valve, Auxiliary Relief, 1900 P.S.I | 1 |
| 25***08 | Valve, Auxiliary Relief, 2000 P.S.I. | 2 |
| 25***09 | Valve, Auxiliary Relief, 2400 P.S.I. | 1 |
E3-19-2 Valve Mountings, With Levers
| 13***5Z | Bolt | 1 |
| 13***9Z | Screw, M10x35mm | 3 |
| 13***1Z | Bolt, M12 X 45mm | 3 |
E3-6-7 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***1Z | Nut | 2 |
E3-9-4 Valve, Selector
| 25***00 | Valve, Selector/Diverter; Supersede 25/96***00 To 25/22***94. San 13767 | 1 |
| 25***01 | Pin, Selok | 1 |
| 25***02 | Spring | 1 |
E3-9-2 Valve, Selector
| 21***05 | Pin, Split | 2 |
| 24***05 | O Ring | 2 |
| 25***01 | Roller | 1 |
E3-5-5 Filter,, Hydraulic
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E3-9-1 Valve, Selector, Stabiliser Limit
| 13***10 | Bolt | 2 |
| 13***30 | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
E3-6-2 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***1Z | Nut | 2 |
E3-5-3 Filter, Hydraulic, Tank Mounted
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Filter, Element, 25 Micron | 1 |
| 32***02 | Filter, Head | 1 |
E3-9-3 Valve, Selector, Installation
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***0Z | Bolt | 2 |
E3-6-3 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***1Z | Nut | 2 |
E3-6-5 Valve, Steering Mode, & Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Spring | 2 |
E3-1-4 Valve, Assembly, 7 Spool
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
| 25***0B | Valve, Main Relief, 3500 Psi | 1 |
E3-1-6 Valve Mounting
| 13***0Z | Bolt | 3 |
| 13***2Z | Bolt | 1 |
| 13***0Z | Bolt | 2 |
E3-6-9 Valve,Steering Mode, & Mounting
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E3-30-5 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***01 | Element, 25 Micron | 1 |
E3-1-2 Valve, Assembly, 6 Spool
| 25***00 | Valve, Block 6 Spool | 1 |
| 25***00 | Valve, Assembly 6 Spool; Same As 25/96***00 But Supplier Had Issued, Rasied Their Drg.See Pi L96/151 | 1 |
| 25***06 | Washer, Seal | 1 |
E3-16-1 Valve, Sections, End Plate, & Pump Side, Proportional Servo
| 25***01 | Plate, End | 1 |
| 25***03 | Washer | 6 |
| 25***04 | Nut | 6 |
E3-20-2 Valve, Covers
| 25***01 | Kit, End Cover | 1 |
| 25***02 | Plug | 1 |
| 25***03 | Kit, Tie-Rod, 5 - Section Valves | 1 |
E4-9-1 Ram, Steering, Front Axle
| 13***03 | Nut | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
E4-11-6 Ram, Extension, Inner
| 12***17 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***21 | Bush | 1 |
E4-6-3 Ram,Extension
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 12***24 | Bush | 1 |
E4-19-2 Ram,Strimech, Bale & Clamp, From April 94
| 99***03 | Kit-Seal | 1 |
| 99***00 | Ram, Assembly | 1 |
| 99***01 | Cylinder | 1 |
E4-19-1 Ram,Strimech, Bale & Clamp, To April 94
| 54***10 | Nut | 1 |
| 54***12 | Piston | 1 |
| 54***14 | Bearing, Gland | 1 |
E4-8-5 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***07 | O Ring | 1 |
E4-3-4 Ram, Displacement
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-12-2 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***19 | Seal, Dowty | 3 |
E4-3-1 Ram, Displacement
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-9-7 Ram, Steering, Rear, Jcb Service Option
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-9-8 Ram,Steering,Front &, Rear Axles.Oleo.
| 14***07 | Nipple, Grease | 1 |
| 23***07 | O Ring | 1 |
| 23***04 | O Ring | 1 |
E4-6-1 Ram, Extension
| 12***15 | Bush | 1 |
| 12***19 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-9-6 Ram, Steering, Front, Jcb Service Option
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-7-1 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-8-2 Ram, Sway
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 15***31 | Lug | 1 |
E4-4-2 Ram, Displacement
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
E4-6-4 Ram, Extension
| 12***15 | Bush | 1 |
| 12***19 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-1-6 Ram, Lift
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-16-1 Ram, Carriage, Sideshift
| 90***76 | Adapter, 90 Deg Elbow | 2 |
| 98***08 | Ring, Retaining | 2 |
| 98***09 | Ring, Retaining | 2 |
E4-5-1 Ram, Extension
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-13-2 Ram, Stabiliser
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***1Z | Washer, 2 Ba | 8 |
E4-3-3 Ram, Displacement
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-11-1 Ram, Extension, Inner
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***07 | Bolt, M8 X 25 | 2 |
E4-7-10 Ram,Tilt, Boom Float Option
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 1 |
E4-13-8 Ram, Stabiliser
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
E4-9-3 Ram, Steering, Front & Rear Axles
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-9-5 Ram, Steering, Front & Rear Axles
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***07 | O Ring | 1 |
| 23***04 | O Ring | 1 |
E4-8-1 Ram, Sway
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-20-1 Circuit, Remote Greasing, Rear
| 14***01 | Washer, Aluminium | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 3 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
E4-17-1 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-1-11 Ram,Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-11-7 Ram, Extension, Inner
| 12***15 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***3Z | Bolt, M10 X 16 | 3 |
E4-12-1 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***27 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-10-2 Ram, Tow Hitch
| 12***05 | Bush | 1 |
| 23***02 | O Ring | 1 |
| 23***07 | O Ring | 1 |
E4-7-7 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 1 |
E4-13-4 Ram, Stabiliser
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
E4-8-8 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-11-2 Ram, Extension, Inner
| 12***15 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***3Z | Bolt, M10 X 16 | 3 |
E4-12-4 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***27 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-13-1 Ram, Stabiliser
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***1Z | Washer, 2 Ba | 8 |
E4-2-3 Ram,Lift, + Float
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Screw | 1 |
E4-1-4 Ram, Lift
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-21-1 Ram, Manure,Silage, With Grab
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-12-3 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***19 | Seal, Dowty | 3 |
E4-4-1 Ram, Displacement
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-7-5 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-1-3 Ram, Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-11-3 Ram, Extension, Inner
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
E4-1-5 Ram, Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-1-2 Ram, Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-3-7 Ram, Displacement
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-13-3 Ram, Stabiliser
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***26 | Bush | 1 |
E4-5-2 Ram,Extension,Metric
| 12***18 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
E4-3-6 Ram, Displacement
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-7-9 Ram, Carriage Side Tilt
| 13***16 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-1-8 Ram, Lift
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-16-2 Ram, Carriage, Sideshift
| 54***01 | Ram, Sideshift Carriage | 1 |
| 54***02 | Kit-Seal, Sideshift Carriage, Ram | 1 |
| 54***03 | Cylinder | 1 |
E4-17-2 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 12***70 | Pipe, Short | 1 |
E4-3-9 Ram, Displacement
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-7-6 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***00 | Pipe | 1 |
E4-15-1 Ram, Log Grab, Manure Silage Fork, Fixed & Sliding , Bale Grab
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-2-1 Ram, Lift
| 11***04 | Spacer | 1 |
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
E4-7-2 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***00 | Pipe, Piston Side | 1 |
E4-12-5 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-13-6 Ram, Stabiliser
| 12***17 | Bush | 1 |
| 12***26 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 8 |
E4-11-4 Ram, Extension, Inner
| 12***15 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***3Z | Bolt, M10 X 16 | 3 |
E4-15-5 Ram, Manure Fork, With Push Off
| 98***01 | Ram, Assembly | 1 |
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
E4-3-5 Ram, Displacement
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-2-2 Ram, Lift
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Screw | 1 |
E4-14-1 Ram, Steering
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***02 | O Ring | 1 |
| 23***04 | O Ring | 1 |
E4-7-3 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 13***14 | Bolt | 2 |
E4-10-1 Ram, Tow Hitch
| 12***05 | Bush | 1 |
| 24***02 | Seal, Gland | 1 |
| 24***07 | Ring, Wear | 1 |
E4-13-5 Ram, Stabiliser
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 8 |
E4-18-1 Ram,Box Tipper, Strimech
| 98***30 | Cylinder, Hydraulic | 1 |
| 98***45 | Locknut | 1 |
| 98***46 | Seal, Piston Head; Will Be Provided As A Part Of Seal Kit, 98***54.See San 09107.Ref L Collins/Strimec | 1 |
E4-7-8 Ram, Carriage Side Tilt
| 13***06 | Bolt | 1 |
| 13***10 | Bolt | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E4-1-10 Ram, Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-11-5 Ram, Extension, Inner
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
E4-9-4 Ram, Steering, Front & Rear Axles
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***01 | O Ring | 1 |
E4-1-1 Ram, Lift
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-9-2 Ram, Steering, Rear Axle
| 13***03 | Nut | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
E4-7-4 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***00 | Pipe | 1 |
E4-6-2 Ram, Extension
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 12***24 | Bush | 1 |
E4-3-2 Ram, Displacement
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
F Axles,Wheels & Transmission
F1-1-10 Axle Breather
| 45***01 | Breather, Extension | 1 |
| 45***01 | Breather, Extension; Replaced By 45***01, See San05257, Fit To R.H. Side Of Front Axle. It Is Important To Make Sure That The Hole In The Breather Tube Points To The Road Wheel., Breather, Extension; Replaced By 45***01, See San05257 | 1 |
| 45***02 | Plug, Breather | 1 |
F1-8-1 Axle, Pad Mounted, Shims
| 15***09 | Shim, Axle, 3mm Thick, Shim, Axle, 3mm Thick; See Note 2. Axle Shim | 0 |
F1-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F1-2-12 Crown Wheel & Pinion, 453/33290 Axle
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-3-2 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F1-5-3 Shaft, Drive
| 91***01 | Kit-Spider, 93mm Long, 35mm Bearing Dia; Replaced By 91***02 | 2 |
| 91***02 | Yoke, Centre Joint; Replaced By 91***03, See San07225 | 1 |
| 91***03 | Shaft, Wheel Side; Replaced By 91***01 + 82***94 | 1 |
F1-4-3 Track Rod, Adjustable
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 45***00 | Rod, Track, Adjustable | 1 |
| 45***01 | Rod, Track, ( Short End ) | 1 |
F1-1-5 Axle Assembly, Drive, Steering, 3 Piece Pad Mounted
| 13***4Z | Bolt | 8 |
| 13***1Z | Nut | 8 |
| 13***3Z | Nut, 1" | 8 |
F1-5-4 Shaft, Drive
| 91***02 | Yoke, Centre Joint; Replaced By 91***03, See San07225 | 1 |
| 91***03 | Shaft, Wheel Side; Replaced By 91***01 + 82***94 | 1 |
| 91***03 | Circlip | 5 |
F1-1-4 Axle Assembly, Drive, Steering, 3 Piece Pin Mounted, Sway Machines
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-2-2 Differential, Assembly, Pin Mounted, Sway Machines
| 13***18 | Bolt | 8 |
| 13***08 | Capscrew | 8 |
| 13***07 | Capscrew | 8 |
F1-2-10 Differential Assy, Axle 453/33290
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F1-2-1 Differential, Assembly, Pad Mounted
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-2-9 Differential, Components, Limited Slip Diff
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F1-1-6 Axle Assembly, Drive, Steering, 3 Piece Pin Mounted, Sway Machines
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-2-3 Differential, Assembly, Pad Mounted
| 13***18 | Bolt | 8 |
| 13***08 | Capscrew | 8 |
| 13***07 | Capscrew | 8 |
F1-5-2 Shaft, Drive
| 91***01 | Shaft, Wheel Side | 2 |
| 91***04 | Circlip | 8 |
| 91***06 | Yoke, Central | 1 |
F1-5-1 Shaft, Drive
| 91***00 | Shaft, Drive, Assembly | 2 |
| 91***01 | Shaft, Wheel Side | 1 |
| 91***02 | Yoke, Differential Side | 1 |
F1-1-1 Axle Assembly, Drive, Steering, 3 Piece Pad Mounted
| 13***2Z | Bolt | 4 |
| 13***4Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
F1-2-6 Differential, Assembly, Pad Mounted, Limited Slip Differential
| 13***08 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 44***05 | Spacer, Collapsible | 1 |
F1-7-1 Ram, Steering, Front Axle, Installation
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 91***00 | Pin, Pivot, 105mm X 25mm Dia. | 4 |
F1-4-1 Knuckle, Steering, & Track Rod
| 13***05 | Bolt | 2 |
| 13***09 | Bolt | 16 |
| 13***5Z | Bolt | 2 |
F1-2-8 Differential, Assembly, Pin Mounted, Limited Slip Differential
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 44***05 | Spacer, Collapsible | 1 |
F1-6-1 Ram, Sway, Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***23 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
F1-1-2 Axle Assembly, Drive, Steering, 3 Piece Pin Mounted, Sway Machines
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-4-4 Track Rod, Adjustable
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 45***01 | Rod, Track, ( Short End ) | 1 |
| 45***03 | Nut, Adjusting | 1 |
F1-1-7 Axle Assembly, Drive, Steering, 3 Piece Pin Mounted, Sway Machines
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-1-3 Axle Assembly, Drive, Steering, 3 Piece Pad Mounted
| 13***2Z | Bolt | 4 |
| 13***4Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
F1-2-4 Differential, Assembly, Pin Mounted, Sway Machines
| 13***18 | Bolt | 8 |
| 13***08 | Capscrew | 8 |
| 13***07 | Capscrew | 8 |
F1-4-2 Knuckle, Steering, & Track Rod
| 13***05 | Bolt | 2 |
| 13***09 | Bolt | 16 |
| 13***5Z | Bolt | 2 |
F2-5-1 Shaft, Drive
| 82***94 | Circlip, External | 2 |
| 91***00 | Shaft, Drive Assembly, 1240.1mm Long; Replaced By Mss 91***00 + 82***94, See San08701 | 1 |
| 91***01 | Shaft, Axle Side, 926.0mm Long | 1 |
F2-6-1 Ram, Steering, Rear Axle, Installation
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 91***00 | Pin, Pivot, 105mm X 25mm Dia. | 4 |
F2-2-4 Differential, Assembly
| 13***18 | Bolt | 8 |
| 21***12 | Pin, Tension | 2 |
| 44***05 | Spacer, Collapsible | 1 |
F2-5-4 Shaft, Drive
| 91***00 | Shaft, Drive, Shaft, Drive; See Note 1. New Driveshafts Interchangeable With Old Whensupplied With 82***94 | 1 |
| 91***00 | Shaft, Drive; See Note 1. New Driveshafts Interchangeable With Old If Using 82***94, Shaft, Drive | 1 |
F2-4-1 Knuckle, Steering, & Track Rod
| 13***05 | Bolt | 2 |
| 13***09 | Bolt | 16 |
| 13***5Z | Bolt | 2 |
F2-2-1 Differential, Assembly
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-2-2 Differential, Assembly
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
F2-5-3 Shaft, Drive
| 91***00 | Shaft, Drive Assembly, Btb330; Replaced By 91***00 + 82***94, See San08838 | 1 |
| 91***01 | Kit-Spider, 93mm Long, 35mm Bearing Dia; Replaced By 91***02 | 4 |
| 91***02 | Yoke, Centre Joint; Replaced By 91***03, See San07225 | 2 |
F2-5-2 Shaft, Drive
| 82***94 | Circlip, External | 1 |
| 91***04 | Circlip | 8 |
| 91***06 | Yoke, Central | 2 |
F2-8-1 Axle Pivot, Rear, None Overload
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
F2-7-1 Axle, Rear, Remote Greasing
| 14***01 | Screw | 2 |
| 15***00 | Connector | 2 |
| 15***39 | Pipe, Grease | 1 |
F2-1-1 Axle Assembly, Drive, Steering, Pivot Mounted
| 13***08 | Bolt | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
F2-2-3 Differential, Assembly
| 44***05 | Spacer, Collapsible | 1 |
| 44***06 | Gear; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. | 2 |
| 44***07 | Gear, Pinion; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. Lsd 2 Pinion 44***00 | 2 |
F2-9-1 Axle Pivot, Rear, None Overload
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
F2-1-3 Axle Assembly, Drive, Steering, Pivot Mounted
| 13***09 | Bolt | 14 |
| 13***09 | Screw | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-4-2 Knuckle, Steering, & Track Rod
| 13***05 | Bolt | 2 |
| 13***09 | Bolt | 16 |
| 13***5Z | Bolt | 2 |
F2-1-2 Axle Assembly, Drive, Steering, Rear Sway
| 13***08 | Bolt | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
F2-3-2 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-2-8 Differential, Components
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Gear Kit | 1 |
F2-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F3-2-7 Wheels & Tires
| 15***01 | Valve, 115 Deg | 1 |
| 16***06 | Wheel, Assembly 17.5-25x12ply, Goodyear | 1 |
| 41***00 | Wheel, Centre | 1 |
F3-2-5 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly, Sure Grip, 15.5/80-24x10 Ply, Wheel, Assembly, Sure Grip, 15.5/80-24x10 Ply; 15.5/80-24 Sure Grip Goodyear. Replace With 12 Ply Tyres | 4 |
F3-1-2 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-3-1 Propshafts, Powershift Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 4 |
F3-3-5 Propshafts, Powershift Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 4 |
F3-2-8 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly, Sure Grip, 15.5/80-24x10 Ply, Wheel, Assembly, Sure Grip, 15.5/80-24x10 Ply; 15.5/80-24 Sure Grip Goodyear. Replace With 12 Ply Tyres | 4 |
F3-2-4 Wheels & Tires
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly, Goodyear, 15.5-25x12ply Tract., Wheel, Assembly, Goodyear, 15.5-25x12ply Tract.; See Note 1. Change In Matching Sets.Do Not Mix Tires | 1 |
F3-1-3 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-2-1 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly | 4 |
F3-1-1 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-1-6 Propshafts, Transmission
| 11***25 | Strap | 2 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
F3-2-6 Wheels & Tires
| 15***01 | Valve | 1 |
| 15***01 | Valve, 115 Deg | 1 |
| 15***00 | Wheel, Assembly | 4 |
F3-2-2 Wheels & Tires
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly | 4 |
F3-1-5 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-1-4 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-2-3 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, 15.5 R25, Michelin Xtla | 4 |
| 15***00 | Wheel, Assembly - Firestone, 15.5x25-12 Ply | 4 |
F5-6-5 Gear Change, German
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
F5-5-2 Transmission, Clutch Unit, Drop Box, German
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F5-7-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F5-2-5 Transmission, Jcb Syncro Shuttle, Electric 2/4wd Drop Box Components
| 13***8Z | Bolt, M10 X 30 | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-1-8 Transmission, Jcb Syncro Shuttle
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-3-2 Gearbox Components, Electrical & Manual, Transmissions
| 13***03 | Bolt, M10x16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-2-9 Transmission, Jcb Syncro Shuttle, German 2/4wd Electric Dropbox Components
| 13***8Z | Bolt, M10 X 30 | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-6-4 Gear Change
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
F5-5-1 Transmission, Clutch Unit, Drop Box
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F5-4-3 Clutch Reverser Unit, German
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-2-1 Transmission, Jcb Syncro Shuttle, Electric 2/4wd Drop Box Components
| 13***08 | Bolt | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-1-5 Transmission, Jcb Syncro Shuttle, Permanent 4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-1-4 Transmission, Jcb Syncro Shuttle, 2/4wd Manual Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-2-8 Transmission, Jcb Syncro Shuttle, German 2/4wd Electric Dropbox Components
| 13***8Z | Bolt, M10 X 30 | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-1-3 Transmission, Jcb Syncro Shuttle, 2/4wd Electric Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-3-3 Gearbox Components, Electrical & Manual, Transmissions
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-1-9 Transmission, Jcb Syncro Shuttle, 3 Speed Permanent 4wd, German
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-2-3 Transmission, Jcb Syncro Shuttle, Manual 2/4wd & P4wd Drop Box Components
| 13***08 | Bolt | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
| 14***14 | Washer | 1 |
F5-1-2 Transmission, Jcb Syncro Shuttle, 2/4wd Manual Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-1-7 Transmission, Jcb Syncro Shuttle, Permanent 4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-4-2 Clutch Reverser Unit, Electrical & Manual, Transmissions
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-3-1 Gearbox Components, Electrical & Manual, Transmissions
| 13***05 | Bolt | 8 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-10-1 Cooler, Oil, & Installation
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 15***01 | Pipe | 1 |
F5-1-10 Transmission, Jcb Syncro Shuttle, 3 Speed, 2/4wd Electric Control, German
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-3-5 Gearbox Components, 2/4wd Electrical, German
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-3-4 Gearbox Components, Permanent 4wd, German
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-1-1 Transmission, Jcb Syncro Shuttle, 2/4wd Electric & Manual Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-8-2 Transmission, Mounting
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F5-2-4 Transmission, Jcb Syncro Shuttle, Electric 2/4wd Drop Box Components
| 13***08 | Bolt | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-6-2 Gear Change
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***24 | Fork, Selector, 1st & 2nd; Use 44***10 X 4, 44***01 X 1, 44***05 X, 2, 44***02 X 1, 44***04 X 2. | 1 |
F5-1-11 Transmission, Jcb Syncro Shuttle, 3 Speed, 2/4wd Electric Control, German
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-6-3 Gear Change, German
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***24 | Fork, Selector, 1st & 2nd; Use 44***10 X 4, 44***01 X 1, 44***05 X, 2, 44***02 X 1, 44***04 X 2. | 1 |
F5-1-6 Transmission, Jcb Syncro Shuttle, 2/4wd Electric Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-2-6 Transmission, Jcb Syncro Shuttle, Permanenet 4wd Drop Box Components
| 13***08 | Bolt | 1 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-10-2 Cooler, Oil, & Installation
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***2Z | Washer | 2 |
F5-6-1 Gear Change
| 13***05 | Bolt | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***24 | Fork, Selector, 1st & 2nd; Use 44***10 X 4, 44***01 X 1, 44***05 X, 2, 44***02 X 1, 44***04 X 2. | 1 |
F5-2-7 Transmission, Jcb Syncro Shuttle, German Permanent 4wd Drop Box Components
| 13***8Z | Bolt, M10 X 30 | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-2-2 Transmission, Jcb Syncro Shuttle, Manual 2/4wd & P4wd Drop Box Components
| 13***08 | Bolt | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
| 14***14 | Washer | 1 |
F5-8-1 Transmission, Mounting
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F5-4-1 Clutch Reverser Unit, Electrical & Manual, Transmissions
| 13***02 | Plug, Blanking | 2 |
| 22***57 | Circlip, External | 4 |
| 22***94 | Circlip | 2 |
F6-1-10 Gearbox, 4 Speed, 2/4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-1-13 Gearbox, 3 Speed, 2/4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-1-1 Gearbox, 4 Speed, Permanent 4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
F6-1-2 Gearbox, 4 Speed, Permanent 4wd
| 13***08 | Bolt | 8 |
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
F6-3-5 Gearbox Components, 2/4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F6-2-2 Gearbox, External Components, Permanent 4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F6-5-1 Shaft, Output Group, 2/4 Wheel Drive
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-4-2 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F6-5-2 Shaft, Output Group, 2/4 Wheel Drive
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-8-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F6-6-1 Gear Change
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
F6-2-5 Gearbox, External Components, 2/4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F6-3-2 Gearbox Components, Permanent 4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F6-3-1 Gearbox Components, Permanent 4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F6-1-6 Gearbox, 3 Speed, Permanent 4wd
| 13***08 | Bolt | 8 |
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
F6-10-1 Cooler, Oil, & Installation
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 15***06 | Pipe | 1 |
F6-4-1 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F6-3-4 Gearbox Components, 2/4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F6-1-14 Gearbox, 3 Speed, 2/4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-10-2 Cooler, Oil, & Installation
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***2Z | Washer | 2 |
F6-2-1 Gearbox, External Components, Permanent 4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F6-11-1 Flywheel Housing, Cover Plate
| 13***3Z | Screw, M8 X 16 | 1 |
| 99***00 | Cover, Plate Assembly, Flywheel | 1 |
| 99***01 | Plate, Outer | 1 |
F6-6-2 Gear Change, 3 Speed
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
F6-9-1 Transmission, Mounting
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F6-2-4 Gearbox, External Components, 2/4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F6-1-9 Gearbox, 4 Speed, 2/4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-1-5 Gearbox, 3 Speed, Permanent 4wd
| 13***08 | Bolt | 8 |
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
F7-3-1 Transmission, Powershift, Complete, German
| 44***00 | Gearbox, Powershift Ps740, P4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
| 44***00 | Gearbox, Powershift Ps740, 2/4wd; Replaced By 44***00 + 32/91***00, See San03217 | 1 |
F7-6-1 Clutch, Input, Powershift Transmission
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***0Z | Bolt | 4 |
| 20***00 | Pump, Oil, (Rear Seal Not Supplied); Replaced By 20/91***00 | 1 |
F7-4-5 Shaft, Output Group, 2/4 Wheel Drive, German
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 10 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F7-2-1 Transmission, Powershift, Complete, 'Farm Special Plus' Only
| 44***00 | Gearbox, Powershift Ps740, P4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
| 44***00 | Gearbox, Powershift Ps740, 2/4wd; Replaced By 46***40, See San 12251 | 1 |
| 44***00 | Gearbox, Powershift Ps740, Ratio 1:1.495 2/4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
F7-8-5 Mainshaft Components, Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
| 44***05 | Plate, Friction | 9 |
F7-4-1 Shaft, Output Group, 2/4 Wheel Drive
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 10 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F7-1-1 Transmission, Powershift, Complete
| 44***00 | Gearbox, Powershift Ps740, P4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
| 44***00 | Gearbox, Powershift Ps740, 2/4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
F7-7-1 Clutch, Forward, Powershift Transmission
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F7-10-1 Switch, Solenoid, Powershift Transmission
| 13***8Z | Bolt | 14 |
| 13***1Z | Bolt, M8 X 45; Replaced By 13***1z, See San05502 | 2 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F7-12-1 Pipework, 2/4 Wheel Drive, Powershift Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 44***00 | Pipe; Replaced By 44***00, 81***78, 16***01., See San08667 | 1 |
F7-5-5 Shaft, Output Group, Permanent 4wd, German
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F7-15-1 Transmission, Mounting, Powershift
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F7-13-1 Pipework, Permanent 4wd, Powershift Transmissions
| 44***00 | Pipe, Short; Replaced By Mss 44***00 X1, 16***03 X2,, 14***18 X2 | 1 |
| 44***00 | Pipe, Long; Replaced By Mss 44***00 X1, 16***03 X2,, 14***18 X2 | 1 |
| 81***52 | Plug, Taper 1/4" Bsp | 1 |
F7-11-1 Transmission, Powershift, External Components
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 13***8Z | Bolt, M10 X 30 | 19 |
| 13***3Z | Screw, M8 X 16 | 2 |
F7-9-5 Layshaft Components, Powershift Transmission
| 13***7Z | Bolt, Coated | 4 |
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
F7-14-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F7-16-1 Cooler, Oil, & Installation
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 15***06 | Pipe | 1 |
F7-8-1 Mainshaft Components, Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
| 44***05 | Plate, Friction | 9 |
F7-5-1 Shaft, Output Group, Permanent 4wd
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F7-9-1 Layshaft Components, Powershift Transmission
| 13***7Z | Bolt, Coated | 4 |
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
F7-17-1 Cooler, Oil, & Installation
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***2Z | Washer | 2 |
G Brakes
G1-3-8 Brake Pedal, & Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
G1-3-9 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
G1-3-10 Switch, Relay, Brake Pedal
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 7 |
| 70***00 | Tape, Self-Amalgamating | 1 |
| 71***00 | Relay, Green; Push Power. Qty Has Been Reduced To One Off From M406613, Relay, Green; Front Work Lights (Was 71***00). 71***00 Can Be Used To Relpace The Blue Relays That May Have Been Fitted To Early M/C'S, Relay, Green, Relay, Green; Push Power. Relay Mounting Is Bolted To The Hand Brake Mounting Bracket., Relay, Green; Work Lights, Italian, German Requirement Only. Not Fitted Or Required For Usa Machines., Relay, Green; Work Lights, Italian Germam Reqiurement Only. Not Fitted Or Reqiured On Usa Machines. | 1 |
G1-2-2 Brake System, Rear
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 5 |
| 13***0Z | Bolt | 1 |
G1-2-5 Brake System, Front
| 13***8Z | Screw, M8x30 | 1 |
| 14***14 | Washer, Star | 1 |
| 14***7Z | Washer, Spring | 1 |
G1-6-2 Brake, Components, Rear Axle
| 22***45 | Circlip | 2 |
| 45***18 | Plate, Friction; Replaced By 45***01 | 6 |
| 45***06 | Piston, Brake; Replaced 45***10, See San06472 | 2 |
G1-2-1 Brake System, Front, Sway
| 13***08 | Bolt | 1 |
| 14***14 | Washer, Star | 1 |
| 14***07 | Washer | 1 |
G1-3-11 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***00 | Reservoir | 1 |
G1-5-1 Brake, Components, Front Axle
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***11 | Plate, Friction; Replaced By Nla. 45***4a + 45***6a Or, (45***1a 2cx 2dx Build) | 10 |
G1-3-2 Brake Pedal, & Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
G1-6-1 Brake, Components, Rear Axle
| 13***03 | Screw, Set | 4 |
| 22***45 | Circlip | 2 |
| 45***11 | Plate, Friction; Replaced By Nla. 45***4a + 45***6a Or, (45***1a 2cx 2dx Build) | 6 |
G1-2-4 Brake System, Front
| 13***08 | Bolt | 1 |
| 14***14 | Washer, Star | 1 |
| 14***07 | Washer | 1 |
G1-2-3 Brakes, Trailer, Installation
| 13***0Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***6Z | Bolt, M8 X 70 | 1 |
G1-3-3 Brake Pedal, & Master Cylinder, Servo Installation
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
G1-3-5 Brake Pedal, & Master Cylinder, Servo Installation
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
G1-6-3 Brake, Components, Rear Axle
| 22***45 | Circlip | 2 |
| 45***24 | Plate, Brake Friction; See Ti Gen127 | 6 |
| 45***07 | Plate, Pressure | 2 |
G1-5-3 Brake, Components, Front Axle
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***13 | Pin, Reaction | 6 |
G1-2-6 Brake System, Rear
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 5 |
| 13***0Z | Bolt | 1 |
G1-4-2 Brake, Parking
| 13***4Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 5 |
| 13***3Z | Nut, Lock, M10 | 4 |
G1-4-1 Brake, Parking
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***07 | Bolt | 3 |
| 13***04 | Nut | 2 |
G1-5-2 Brake, Components, Front Axle
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***13 | Pin, Reaction | 6 |
G1-3-12 Brake Pedal, & Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 5 |
G1-3-1 Brake Pedal, & Master Cylinder, Installation
| 13***2Z | Bolt | 2 |
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
G1-1-3 Brake System, Front
| 13***08 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 15***00 | Adapter, 'T' | 1 |
G1-1-1 Brake System, Front
| 13***08 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 15***00 | Adapter, 'T' | 1 |
G1-3-7 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***00 | Reservoir | 1 |
G1-3-6 Switch, Relay, Brake Pedal
| 70***00 | Tape, Self-Amalgamating | 1 |
| 71***00 | Relay, Green; Push Power. Qty Has Been Reduced To One Off From M406613, Relay, Green; Front Work Lights (Was 71***00). 71***00 Can Be Used To Relpace The Blue Relays That May Have Been Fitted To Early M/C'S, Relay, Green, Relay, Green; Push Power. Relay Mounting Is Bolted To The Hand Brake Mounting Bracket., Relay, Green; Work Lights, Italian, German Requirement Only. Not Fitted Or Required For Usa Machines., Relay, Green; Work Lights, Italian Germam Reqiurement Only. Not Fitted Or Reqiured On Usa Machines. | 1 |
| 71***00 | Harness, Brake Light Switch | 1 |
G1-2-7 Brake System,, Front
| 14***4Z | Washer, Star | 1 |
| 15***00 | Nut | 1 |
| 15***00 | Pipe, Brake | 1 |
G1-3-4 Brake Pedal, & Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 12***01 | Cap | 1 |
G1-1-4 Brake System,, Front.
| 15***02 | Pipe, Brake L/H | 1 |
| 15***03 | Pipe, Brake L/H | 1 |
| 15***25 | Pipe, Brake R/H | 1 |
G1-1-2 Brake System, Front
| 13***08 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 15***00 | Adapter, 'T' | 1 |
G1-3-13 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
N Engines 1000 Series 4-4 & 4-4t
N1-1-3 Engine, Complete, Ab Build
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 102bhp | 1 |
| 01***0R | Engine, Reconditioned, 1004-4t Turbocharged; Ab50260, Integral Oil Cooler To M567362. As Item 1,But Less,Flywheel & Housing,Starter Motor,Alternator,Fan Drive Housing,Fan Belt | 1 |
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 102bhp | 1 |
N1-8-1 Engine Mountings
| 11***09 | Washer | 4 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 2 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete, 1004-4, Nat/Aspirated | 1 |
| 01***0R | Engine, Reconditioned, Nat/Aspirated; To M567362 Integral Oil Cooler. As Item 1,But Less,Flywheel & Housing,Starter Motor,Alternator,Fan Drive Housing,Fan Belt | 1 |
| 01***00 | Engine, Complete, 4.40 Nat/Aspirated; Aa50261 Build, With Modene Oil Cooler. Also Fitted To M567180, M567233, M567247. | 1 |
N1-6-2 Timiing Case, Auxiliary Drive, Ab Build
| 02***70 | Gasket | 1 |
| 02***97 | Adapter, Auxiliary Drive | 1 |
| 02***98 | O Ring | 1 |
N1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Ab Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N1-7-1 Flywheel, Aa & Ab Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***14 | Washer | 6 |
N1-8-2 Engine Mountings
| 11***09 | Washer | 4 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 2 |
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N1-2-4 Engine, Short, Ab Build
| 02***44 | Engine, Short, 1004-4t | 1 |
| 02***46 | Engine, Short, 1004-4t, Turbocharged | 1 |
N1-5-1 Fans, Pulleys, & Fan Belt, Aa & Ab Builds
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
N1-1-4 Engine, Complete, Ab, , Air/Con Builds
| 01***00 | Engine, Complete, 1004-4t, 102bhp Turbocharged | 1 |
| 01***0R | Engine, Reconditioned, 1004-4t Turbocharged | 1 |
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 102bhp | 1 |
N1-3-1 Block Assembly, Aa & Ab Builds
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-1-4 Engine, Complete, Ab, Build
| 01***00 | Engine, Complete, 1004-4t, 102bhp Turbocharged | 1 |
| 01***0R | Engine, Reconditioned, 1004-4t Turbocharged | 1 |
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 102bhp | 1 |
N1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ab Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N1-1-2 Engine, Complete, Ab Build
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 96bhp | 1 |
| 01***0R | Engine, Reconditioned, 1004-4t Turbocharged; Ab50304, Integral Oil Cooler To M567362. As Item 1, But Less Flywheel Housing,Starter Motor,Alternator,Fan Drive Housing,Fan Belt | 1 |
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 96bhp; Ab50304 Build, With Modene Oil Cooler. Also Fitted To M567194, M567208, M567215. | 1 |
N1-2-2 Engine, Short, Ab Build
| 02***41 | Engine, Short, Turbo | 1 |
N1-5-2 Fans, Pulleys, & Fan Belt, Ab Build
| 02***79 | Screw | 1 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
N1-6-1 Timing Case, Camshaft & Gears, Aa & Ab Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
N2-2-3 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-1-4 Cylinder Head, Ab Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-4-1 Lifting Plates, Engine, Aa & Ab Builds
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
N2-1-2 Cylinder Head, Ab Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-3-2 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***39 | Cap, Oil Filler | 1 |
N2-2-2 Rocker Assembly, Push Rods & Tappets, Ab Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-3-1 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***39 | Cap, Oil Filler | 1 |
N2-3-3 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 1 |
| 02***58 | Hose, Oil Breather | 1 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***75 | Elbow, Exhaust | 1 |
N3-4-1 Exhaust System, Aa Build
| 02***43 | Bolt | 1 |
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt | 3 |
N3-3-1 Filter, Air, Aa Build
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
N3-3-5 Filter, Pre-Cleaner, Optional
| 32***00 | Kit-Pre-Cleaner | 1 |
| 32***01 | Ring, Rubber Insert | 1 |
| 32***02 | Clamp, T Bolt Band | 1 |
N3-2-2 Manifold, Exhaust, Ab Build
| 02***50 | Gasket | 2 |
| 02***22 | Gasket | 1 |
| 02***76 | Manifold, Exhaust | 1 |
N3-3-4 Filter, Pre-Cleaner, Optional
| 15***76 | Tube, Extension, Pre-Cleaner | 1 |
| 32***00 | Kit-Pre-Cleaner | 1 |
| 32***01 | Clamp, Band | 1 |
N3-4-4 Exhaust System, Ab Build
| 13***4Z | Bolt | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***4Z | Nut, Philidas Thin | 4 |
N3-3-3 Filter, Oil Bath, Optional, Ab Builds
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***2Z | Nut, Lock | 1 |
N3-4-2 Exhaust System, Ab Build
| 02***43 | Bolt | 1 |
| 13***4Z | Bolt | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N3-4-3 Exhaust System, Aa Build
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt | 3 |
| 13***3Z | Nut | 3 |
N3-4-5 Exhaust System, Aa Build
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt | 3 |
| 13***3Z | Nut | 3 |
N3-3-2 Filter, Air, Ab Build
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
N3-1-2 Manifold, Induction, Ab Build
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
| 02***09 | Gasket | 1 |
N4-4-6 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-3 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, 3/8" | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 6 |
N4-4-8 Radiator & Hoses, 20, " Fan, Ab Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-8 Radiator, Fittings & Mountings, Optional Open Matrix Radiator, Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 10 |
N4-3-4 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 2 |
N4-1-1 Pump, Water, Aa & Ab Builds
| 02***80 | Pump, Water | 1 |
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
N4-3-1 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 10 |
N4-4-7 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-5 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 6 |
| 13***2Z | Bolt | 2 |
N4-3-7 Radiator, Fittings & Mountings, 20" Fan, Option 102bhp, Ab Build
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 6 |
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
N4-3-6 Radiator, Fittings & Mountings, 20" Fan, Ab Build
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 6 |
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
N4-4-8 Radiator & Hoses,20", Fan Option,Ab Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-2 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
N4-4-1 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa & Ab Builds
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 1 |
| 02***44 | Housing, Thermostat | 1 |
N4-4-5 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-4-2 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-4-3 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-4-4 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N5-4-1 Filter, Oil, & Oil Feed Adapter, Aa Build
| 02***23 | Switch, Oil Pressure | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
N5-5-7 Cooler, Oil, Filter & Pipework, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N5-5-4 Cooler, Oil, Filter & Pipework, Aa Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***31 | Olive | 1 |
N5-3-1 Piston Cooling Jets, Ab Build
| 02***15 | Jet, Piston Cooling | 4 |
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
N5-2-2 Pump, Oil, & Relief Valve, Ab Build
| 02***61 | Shaft, Idler, Oil Pump | 1 |
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
N5-5-6 Cooler, Oil, Filter & Pipework, Ab Build, Farm Special Plus
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N5-1-1 Sump, Oil, Aa & Ab Builds
| 02***60 | Gasket, Oil Sump | 1 |
| 02***66 | Bracket | 1 |
| 02***26 | Spacer | 1 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***61 | Shaft, Idler, Oil Pump | 1 |
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
N5-5-3 Cooler, Oil, & Pipework, Aa & Ab Builds
| 02***13 | Connector | 1 |
| 02***14 | Element, Cooling | 1 |
| 02***16 | O Ring | 2 |
N5-5-5 Cooler, Oil, Filter & Pipework, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N5-5-2 Cooler, Oil, & Pipework, Aa & Ab Builds
| 02***08 | Spring | 1 |
| 02***13 | Connector | 1 |
| 02***14 | Element, Cooling | 1 |
N5-4-2 Filter, Oil, & Oil Feed Adapter, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***23 | Switch, Oil Pressure | 1 |
| 02***94 | Connector | 1 |
N6-3-6 Fuel System, Auto/Ve, Nt 96bhp, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-6-1 Filter, Fuel Sediment, Aa & Ab Builds
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
N6-5-1 Pump, Fuel Lift, Aa & Ab Builds
| 02***80 | Gasket | 1 |
| 02***72 | Plate, Keep | 2 |
| 02***23 | Gasket | 1 |
N6-2-3 Injectors, Fuel, & Injection Pipes, Ab Build, 102bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-2-4 Injectors, Fuel, & Injection Pipes, Ab Build, 96bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 1 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***81 | Washer | 2 |
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
N6-4-1 Filter, Fuel, Aa & Ab Builds
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-3-2 Fuel System, 102bhp,, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-3-2 Fuel System, 96bhp,, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-3-4 Fuel System, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 6 |
N6-2-2 Injectors, Fuel, & Injection Pipes, Ab Build, 96bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-3-6 Fuel System, Auto/Ve, Nt 102bhp, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-1-4 Pump, Fuel Injection, Automatic Venting, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-1-7 Pump, Fuel Injection, Automatic Venting, 96bhp, Ab Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-3-5 Fuel System, Automatic Venting, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 6 |
N6-1-6 Pump, Fuel Injection, Automatic Venting, 102bhp, Ab Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-3-8 Fuel System, Auto/Ve, Nt 102bhp, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-1-5 Pump, Fuel Injection, Automatic Venting, 96bhp, Ab Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-3-1 Fuel System, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 6 |
N6-3-7 Fuel System, Automatic Venting, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 6 |
N6-1-3 Pump, Fuel Injection, 102bhp, Ab Build
| 02***81 | Washer | 2 |
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
N6-3-3 Fuel System, 96bhp,, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-4-3 Filter, Fuel, Aa & Ab Builds
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-2-1 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 3 |
N6-3-8 Fuel System, Auto/Ve, Nt 96bhp, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-1-2 Pump, Fuel Injection, 96bhp, Ab Build
| 02***81 | Washer | 2 |
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
N6-6-2 Filter, Fuel Sediment, Aa & Ab Builds
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
N6-2-5 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-3-3 Fuel System, 102bhp,, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N7-2-1 Turbo, Pipework, Ab Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
N7-1-4 Turbocharger, Ab Build, 96bhp
| 02***22 | Gasket | 1 |
| 02***05 | Kit-Repair, Turbo | 1 |
| 02***08 | Housing, Centre Assembly | 1 |
N7-7-6 Heater, Engine Block
| 12***64 | Clamp, Block Heater | 1 |
| 13***4Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
N7-4-1 Pump, Vacuum, Aa & Ab Builds
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 4 |
| 15***13 | Key | 1 |
N7-1-1 Turbocharger, Ab Build, 96bhp
| 02***58 | Nut, Lock | 1 |
| 02***60 | Ring, Piston | 1 |
| 02***61 | Shaft, & Wheel Assembly | 1 |
N7-3-2 Pump, Vacuum, & Installation, Aa & Ab Builds
| 15***01 | Pipe, Oil Feed | 1 |
| 15***02 | Nut, Union | 2 |
| 15***03 | Olive | 2 |
N7-1-6 Turbocharger, Ab Build, 96bhp
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***78 | Housing, Centre Assembly | 1 |
N7-3-1 Pump, Vacuum, & Installation, Aa & Ab Builds
| 02***35 | Gasket | 1 |
| 02***99 | Adapter | 1 |
| 02***00 | Pump, Vacuum | 1 |
N7-6-1 Compressor 12.Volt, Air Conditioning
| 13***5Z | Bolt | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
| 99***00 | Compressor, Air Conditioning | 1 |
N7-1-3 Turbocharger, Ab Build, 96bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-7-1 Block Heater, Freeze Plug Type, Optional, Aa Build
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
N7-7-4 Heater, Engine Block
| 12***64 | Clamp, Block Heater | 1 |
| 13***4Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
N7-5-1 Compressor, & Installation, Air Conditioning
| 02***59 | Belt, Drive | 1 |
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***5Z | Bolt | 1 |
N7-1-5 Turbocharger, Ab Build, 102bhp
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***60 | Turbocharger | 1 |
N7-7-2 Heater, Engine Block
| 12***64 | Clamp, Block Heater | 1 |
| 13***4Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
N7-7-7 Block Heater, Heaterless Build
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
N7-1-2 Turbocharger, Ab Build, 102bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-7-8 Block Heater, Heater Build
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
N8-1-1 Gasket Sets, Aa Build
| 02***14 | Kit-Gasket, Top | 1 |
| 02***15 | Kit-Gasket, Bottom | 1 |
| 02***74 | Kit-Gasket, Top | 1 |
N8-2-1 Kit-Engine Overhaul, Aa Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-1-2 Gasket Sets, Ab Build
| 02***84 | Kit-Gasket, Top | 1 |
| 02***15 | Kit-Gasket, Bottom | 1 |
| 02***74 | Kit-Gasket, Top | 1 |
N8-2-4 Kit, Engine Overhaul, Ab Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-2-2 Kit, Engine Overhaul, Ab Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
525-67 F.S serial number reference
For JCB Loadall telehandlers, the machine identification plate is located on the right-hand chassis frame near the operator-cab access step. A duplicate serial is stamped into the main chassis frame between the front and rear axles. Verify applicability with a JCB dealer if the plate is unreadable.
| Prefix | Identifies | Notes |
|---|---|---|
| 561001 | Applicable to JCB 525-67 and 525-67 Farm Special (F.S.) models. This is the starting machine serial number for the service manual covering this generation. | |
| 573593 | Specific machine serial number for a JCB 525-67 manufactured in 1995. | |
| 578430 | Specific machine serial number for a JCB 525-67 Farm Special (F.S.) manufactured in 1996. | |
| 0561000 - 0580000 | Serial range for JCB 525-67 and 525-67 FS telehandlers requiring specific cylinder seal kits (displacement, boom extension, boom lift, steering, carriage tilt, tow hitch, log grab, carriage sideshift, loader clam, box tipper/strimech, frame sway). |
Frequently asked questions
What engine does the JCB 525-67 F.S use?
The JCB 525-67 F.S uses a JCB Diesel engine. It does not require DEF or DPF after-treatment. It uses JCB 15W/40 Multigrade oil. It has a 10-liter oil capacity. It has a 17-liter coolant capacity. It has a 90-liter fuel tank capacity. It has a 152-liter hydraulic tank capacity. It has an 18.25-liter gearbox capacity. It has an 18-liter front axle housing capacity. It has a 13-liter rear axle housing capacity. It has a 2.0-liter hub capacity per side. It has a 2.0-liter hub capacity per side.
What is the operating weight of the JCB 525-67 F.S?
The JCB 525-67 F.S weighs 6.42 tons. It has a nominal load capacity of 2.5 tons at the center of gravity. It has a lifting height of 6.8 meters. It has a capacity of 1 ton at full forward reach. It has a capacity of 2.5 tons at full lift height. It is a telehandler. It is part of the 500 Series. It was produced from 1989 to 1995. It succeeded the 520 series. It was followed by the 530 series.
What replaced the JCB 525-67 F.S?
The JCB 530 series replaced the 525-67 F.S. The 530 series includes the 530-67, 530-95, 530-110, and 530-120 models. The 530 series started from machine serial number the OEM part reference. The 525-67 F.S started from machine serial number the OEM part reference. The 530 series has a two-stage and three-stage boom. It has basic servo options. It has Farm Special variants. It is part of the Loadall family. It is a telehandler. It is used in agricultural and construction sectors.
What 525-67 F.S owners discuss
What engine powers the JCB 525-67 F.S telehandler?
The JCB 525-67 F.S telehandler is equipped with a Perkins 1004.4 engine. This is a heavy-weight snout variant with three bolt holes, 2.9995-inch/3.000-inch main bearings, 2.49995-inch/2.500-inch connecting rods, a 5.000-inch stroke, and a keyed nose with 10+1 lip seal holes. Prior to fitting, the crankshaft requires cleaning to remove rust pitting. The engine is part of the Perkins Blue Engine family, which includes the A4.236 and A4.248 variants.
What are the known powertrain and hydraulic behaviors for this model?
The transmission is a power shuttle type. Common powertrain issues include the machine hunting or dipping a clutch every few seconds during operation, which may precede a complete loss of drive in both forward and reverse directions. The automatic transmission (AT) fluid level must be checked regularly; an empty AT fluid reservoir can cause immediate drive failure. The hydraulic system capacity varies depending on the equipment configuration. When filling the hydraulic system, all rams must be closed, and the level should be monitored via the sight glass. The total system capacity depends on the specific attachment package installed.
What undercarriage or wear patterns are typical for this machine type?
The machine weighs 6.42 tons. It utilizes all-terrain tubeless tires with a size of 12.5/80-18. The boom system requires regular maintenance of wear pad runways and extension ram pivots. The boom safety strut must be inspected as part of the service schedule. Greasing intervals for pivot pins are critical; if JCB MPL Grease is used, all 50-hour greasing operations must be performed at 10-hour intervals, and all 500-hour operations at 50-hour intervals. Boom hoses should be treated with JCB Waxoyl, and slide surfaces with JCB Special Slide Lubricant.
What are the common electrical and sensor issues reported by operators?
Electrical faults are a frequent source of drive failure. The forward/reverse stalk operates microswitches that activate hydraulic solenoids on the transmission body; these stalks can fail, cutting power to the solenoids. Wiring issues around the dash and under the fuse box, including corroded terminals and cracked relay blocks, are common. Specifically, the forward relay block is prone to terminal cracking. Additionally, the axle position sensors, mounted low on the machine, are prone to damage or being knocked off. These sensors have status LEDs that light up when metal passes within 5mm of the sensor end; failure of these sensors can cause a loss of all steering modes.
What steering quirks are associated with the JCB 525-67 series?
The 4-wheel steering, 2-wheel steering, and crab steer functions are controlled by solenoids on the steering valve. A common issue is the rear wheels failing to center or operate independently, making the machine impossible to drive straight. This is often caused by a failure of the rear axle locking mechanism or incorrect solenoid energization. The selector switch on the dash for steering modes can fail, leaving the machine in permanent 4-wheel steering. Turning the wheel to full lock may help align the axles on some machines by allowing oil to bypass the ram seals, but this method is not reliable on all JCB models. Axle misalignment can cause the machine to drive sideways.
What engine quirks are specific to the Perkins 1004.4 series used in this model?
The Perkins 1004.4 engine requires JCB 10W/30 multigrade oil for the first 100 hours of operation when a new or reconditioned engine is fitted. After 100 hours, the oil must be replaced with the lubricant recommended in the service manual. Unusual noises, such as a deep rhythmic knocking that increases under load, indicate serious internal engine problems. Starting problems are a common reason for owner contact, often related to the engine's electrical system or fuel delivery. The engine does not require a break-in period and can be used immediately in normal work cycles after the initial oil change.
What to check when buying a used 525-67 F.S?
Verify the machine serial number falls within the range covered by the service manual for the 525-67 and 525-67 Farm Special (from machine Serial Number the OEM part reference). Check the AT fluid level, as an empty reservoir indicates severe neglect or internal failure. Inspect the forward and reverse relay blocks for cracked terminals and corrosion. Test the axle position sensors by observing their status LEDs. Check the rear axle locking mechanism for proper centering. Inspect the boom wear pad runways and extension ram pivots for excessive wear. Ensure the coolant mixture is at 55% antifreeze, which provides freeze protection down to -36°C (-33°F). Verify the engine oil has been changed after the initial 100-hour break-in period. Have your dealer verify the exact serial range and engine variant compatibility.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 525-67 F.S. Related factory variants of the same model family:
525-67 F.S
Need a specific 525-67 F.S part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.