JCBagriculturaltelescopic handlers (loadall)
Jcb 525-58 F.S
Maintenance schedule, common problems & OEM parts breakdown
The JCB 525-58 is a telehandler manufactured from 1989 to 1994. It weighs 6.3 tons and has a nominal load at the center of gravity of 2.5 tons. The lifting height of this telehandler is 5.9 meters. It has a capacity of 1 ton at full forward reach and a capacity of 2.5 tons at full lift height.
The JCB 525-58 is a telehandler manufactured by JCB from 1989 to 1994. It weighs 6.3 tons and has a nominal load at the center of gravity of 2.5 tons. The lifting height of this telehandler is 5.9 meters. It has a capacity of 1 ton at full forward reach and a capacity of 2.5 tons at full lift height.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 525-58 F.S specifications
Engine
| Model | Perkins 1004-4 |
| Configuration | 4-cylinder diesel |
| Net Power | 80 HP @ 2,200 RPM (57 kW) |
| Aspiration | Naturally aspirated |
Weights
| Operating Weight | 6,300 kg (13,889 lbs) |
| Nominal Load at Center of Gravity | 2,500 kg (5,512 lbs) |
| Capacity at Full Forward Reach | 1,000 kg (2,205 lbs) |
Dimensions
| Maximum Lift Height | 5.9 m (19.36 ft) |
| Maximum Forward Reach | 3.07 m (10.07 ft) |
| Load Center | 500 mm (19.69 in) |
| Tire Size | 15.5/80-24 |
Performance
| Transmission | Synchro Shuttle, 4F/4R gears |
| Hydraulic Flow Rate | 80 L/min (21.1 GPM) |
| Drive Configuration | 4WD |
Service capacities (summary)
| Cooling System | 12.92 L (3.41 gal) |
| Engine Oil | 10 L (2.6 gal) |
| Gearbox (Syncro Shuttle) | 18.25 L (4.8 gal) |
| Hydraulic System | Varies by configuration/series (depends on equipment used) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
525-58 F.S fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 10 litres (2.2 US gal) | JCB 15W/40 Multigrade (SAE 15W/40, MIL-L-46152B, API CD/SE, MIL-L-2104) for -10 °C to 50 °C (14 °F to 122 °F); JCB Super Universal Agricultural SAE 10W/30 (MIL-L-2105, MIL-L-46152, API CD/SE, MIL-L-2104C) for -15 °C to 30 °C (5 °F to 86 °F). Use JCB 10W/30 Multigrade for the first 100 hours of new or reconditioned engine operation, then replace with the recommended grade. |
| Cooling System | 12.92 litres (2.84 US gal) | JCB Universal Antifreeze/water (ASTM D3306-74). 55% Antifreeze mixture starts to freeze at -36 °C (-33 °F). |
| Fuel Tank | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Transmission/Powertrain (Gearbox Syncro Shuttle) | 18.25 litres (4.0 US gal) | JCB Special Transmission Fluid (ESP-M2C 33G) |
| Transmission/Powertrain (Powershift) | 15.0 litres (3.3 US gal) | JCB Special Transmission Fluid |
| Final Drives | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System and Tank | 9.35 litres (2.04 US gal) | Not documented for this exact serial range — verify with your dealer |
| Axles/Differentials | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease | Not documented for this exact serial range — verify with your dealer | Lithium based, No. 2 consistency (NLGI No. 2); Lithium complex NLGI No. 2 consistency. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 525-58 F.S maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 525-58 F.S beyond the schedule
Predictive Maintenance & Fluid Analysis
JCB extends engine oil intervals to 500 hours on its EcoMAX and Dieselmax engines because they don't run DEF or DPF regen. The 500-hour service is the first major service. Take oil samples from engine, hydraulic, and axle systems. Inspect hydraulic return filter magnet for metallic debris. Check turbocharger shaft play and charge cooler boot condition. Monitor coolant mixture for freeze protection.
Corrective & Common Repairs
The Perkins 1004-4 4-cylinder diesel engine delivers 80 HP. The 4F/4R manual shuttle gearbox allows quick directional changes. Replace primary and secondary fuel filters. Check alternator and starter load. Inspect hydraulic hoses for chafing and cylinder rods for scoring. Test brake discs and immersed brake condition. Check injector spray pattern via diagnostic tool.
Overhaul & Rebuild Points
The 2000-hour service is the deep service. Change hydraulic oil and clean hydraulic tank. Inspect boom, arm, and chassis for structural cracks. Measure swing ring play with dial indicator. Service brake discs and immersed brake condition. Check injector spray pattern via diagnostic tool. Service cab HVAC including A/C pressure and cabin filter.
Seasonal & Environment Servicing
JCB's cab and access design is built around the daily 10-hour check. Most fluid gauges, drain points, and inspection covers on Loadall telehandlers are accessible at ground level. Check tire pressure and cut damage. Inspect for fluid leaks under engine bay and axles. Test safety systems including seat belt, horn, and backup alarm. Check coolant mixture for freeze protection.
525-58 F.S common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 02/200165 | Pipe, Assembly, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/200176 | Pipe, Assembly, Fuel, Filter To Inj/Pump | Fuel system service | Check fitment → |
| 02/200374 | Pipe, Assembly, Fuel, Filter To Heater | Fuel system service | Check fitment → |
| 02/200453 | Pipe, Assembly, Fuel, Inj/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/200177 | Pipe, Assembly, Fuel, Inj/Pump To F/Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
525-58 F.S fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| F01 | Engine ECU failure | Engine control module malfunction or connection fault | Check ECU connections |
| E420 | Low hydraulic pressure | Hydraulic system leak or pump failure | Refill hydraulic fluid, check for leaks |
| E512 | Low voltage detected | Battery system fault | Charge or replace battery |
| D901 | Communication error with display unit | CAN bus wiring fault | Inspect CAN bus wiring |
| C321 | Overheating warning | Cooling system issue | Check coolant level and radiator |
| B113 | Brake pressure too low | Brake system fault | Bleed brakes, inspect system |
| A100 | Fuel pump not responding | Fuel system electrical fault | Inspect wiring, replace pump |
| P0087 | Shared sump low pressure fault | Pump without pressure supply issue | Check pump pressure supply |
| P0107 | Atmospheric pressure sensor circuit input low | Open or shorted to ground sensor circuit | Inspect sensor circuit |
| P0117 | Engine coolant temperature sensor fault (low voltage) | Earth fault or short circuit in sensor | Inspect sensor wiring and connections |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
525-58 F.S attachments & work tools
Bale Handling
Worksaver manufactures integrated-frame bale spears for the JCB 525-58 using the JCB Q-Fit quick-attach system. Options include single spears rated at 3,000 lbs, dual spears rated at 3,800 lbs, and triple spears rated at 3,000 to 4,000 lbs depending on the specific model configuration.
Material Handling
Pallet forks are available in 48-inch and 72-inch lengths, with some configurations requiring a compact tool carrier adapter. These forks are designed for the machine's 2,500 kg (5,511 lbs) maximum lift capacity and 5.9 m (19.36 ft) maximum lift height.
Earthmoving
Shovel buckets with a 0.7 cubic meter capacity are listed for the JCB 525-58 and similar 525-50 series models. These attachments utilize the machine's standard quick-attach coupler system for rapid tool changes.
Hydraulic System
The telehandler operates with a hydraulic flow rate of 80 L/min (21.1 GPM). Seal kits are available for the displacement, boom extension, boom lift, steering, carriage tilt, tow hitch, log grab, carriage sideshift, loader clam, and box tipper cylinders.
Engine & Power
The JCB 525-58 is powered by a Perkins 1004-4 4-cylinder diesel engine delivering 80 HP at 2,200 RPM. The engine serial number is located on the left side of the block near the injection pump.
Transmission
The machine utilizes a synchro shuttle transmission with 4 forward and 4 reverse gears. This manual shuttle gearbox allows for quick directional changes to improve productivity during repetitive load cycles.
All 525-58 F.S assemblies by section
Every catalogued assembly group for the Jcb 525-58 F.S. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-5-1 Tooth Guard
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt, 1/2" X 2.1/4" Long | 2 |
A1-2-1 Shovel, 1.0cu.M.,, With Bolt On Toe Plate
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 2 |
| 13***1Z | Nut | 16 |
A1-1-2 Shovel, 1.1cu.Yd, 2235mm (7'4")Wide
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-3-1 Shovel, Clam, 6 In 1, 2260mm (7'5") Wide
| 10***04 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 2 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
A1-6-1 Trash Clamp Bucket, 2.5 Cu Yd
| 13***06 | Bolt | 6 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
| 45***00 | Coupling, Female, 3/8" Bsp; Replaced By 45/91***00, See San04893 | 1 |
A1-4-1 Shovels, 8.0 Ft Wide
| 13***1Z | Nut | 9 |
| 14***1Z | Washer, Spring | 9 |
| 54***80 | Toeplate, Weld On | 1 |
A1-3-3 Shovel, Clam, 6 In 1, 2260mm (7'5") Wide
| 10***04 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 2 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
A1-3-2 Shovel, Clam, 6 In 1, 2260mm (7'5") Wide
| 10***04 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 2 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
A1-2-2 Shovel,, 1.1cu.Yd.(88"Wide), With Bolt On Toe Plate
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A1-1-1 Shovel,, 1.0cu.M
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-5-2 Tooth Guard, 6 In 1 Clam Shovel
| 12***00 | Guard, Tooth | 1 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
A1-1-3 Shovel, 0.9cu.M.,, 2286mm (7'62)Wide
| 10***00 | Guard, Tooth | 1 |
| 13***18 | Bolt | 1 |
| 13***01 | Nut | 16 |
A1-3-4 Shovel,Clam,6 In 1, 2260mm Wide
| 12***23 | Bush | 2 |
| 12***00 | Jaw, Clamshovel | 1 |
| 13***6Z | Bolt | 2 |
A3-11-1 Fork, Manure, Silage, 2.29m Wide X 1.9cu.M
| 54***00 | Fork, Manure/Silage, Complete; Use 98***00 Ref A.Little | 1 |
| 54***01 | Frame | 1 |
| 54***02 | Boss | 9 |
A3-6-1 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
A3-14-1 Bucket, Grain, Potatoe, 50 & 70 Cub.Ft 7'6" Wide
| 54***00 | Bucket, Grain/Potato, 7'-6"Wide X 70cu/Ft; Use 98***00 Ref A.Little | 1 |
| 54***00 | Bucket, Grain/Potato, 7'-6"Wide X 50cu/Ft; Use 98***00 Ref A.Little | 1 |
| 54***01 | Plate, Toe | 1 |
A3-1-5 Carriage, Sideshift
| 13***12 | Screw, Cap; Replaces 60***12, San 13331 | 2 |
| 54***00 | Carriage, Sideshift, Class 3 | 1 |
| 54***01 | Pin, Clevis | 2 |
A3-2-1 Carriage, Fork, Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-35-1 12' Truss Boom Q-Fit, Optional
| 33***18 | Boom, Truss | 1 |
| 33***20 | Decal | 1 |
A3-51-1 48" & 66" Sideshift, Carriages (Usa Only)
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
A3-34-1 Man Platform, Uk & Spain Only
| 15***00 | Pin | 2 |
| 81***84 | Decal, Warning, Platform Securing | 1 |
| 81***21 | Decal, Jcb Platform | 1 |
A3-29-1 Kits
| 98***00 | Kit, Sideshift Carriage, Class 2b, Kit, Sideshift Carriage, Class 2b; 525-58 & 67, 505-19 & 22. Fork Frame 54***00 (See A3-2-1), Is Required To Attach This Item To Machine. | 1 |
| 98***00 | Kit, Sideshift Carriage, Class 3b | 1 |
| 98***00 | Fork, Industrial Class 3b | 1 |
A3-1-9 Carriage, Side Tilt
| 13***04 | Bolt | 2 |
| 13***06 | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
A3-21-5 Fork, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 81***68 | Plate, Rating | 1 |
A3-43-1 Multi-Shovel
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 8 |
A3-1-1 Carriage, 'Q'Fit
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-5-1 Tow Hitch, Manual, Installation
| 13***8Z | Bolt | 4 |
| 13***6Z | Bolt | 4 |
| 13***6Z | Bolt | 2 |
A3-1-11 Carriage, Sideshift
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, Male 3/8"Bsp, C/W 2x, 22***33 Circlips | 1 |
| 45***00 | Coupling, Female 3/8"Bsp C/W, 2x Circlip 22***43 | 1 |
A3-47-1 Box Tipper,Sideways
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-20-1 Blade, Snow, 7'6" (2.29m) Wide
| 54***00 | Blade, Snow | 1 |
A3-6-10 Counterweight, With Tow Hitch
| 13***1Z | Bolt | 2 |
| 14***2Z | Washer, M20 | 10 |
| 15***00 | Pin | 1 |
A3-1-3 Carriage, 'Q'Fit
| 11***20 | Boss, Pivot | 2 |
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-30-1 Installation, 2.5 Yd, Scrap Grapple Bucket
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-1-6 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-22-5 Wrapped Bale Clamp
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
| 13***3Z | Nut, M20 | 3 |
A3-12-1 Fork, Manure, Silage, With Top Grab, 2.29m Wide X 1.9cu.M
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-6-8 Counterweight, Front
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***8Z | Washer | 4 |
A3-33-1 Installation, Hay Squeeze
| 13***4Z | Bolt, 3/8" | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 12 |
A3-52-1 Side Tilt Carriage, Boom Mounted
| 13***0Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-40-1 Silashear
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-38-1 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A3-28-1 Fork Kit, Italy
| 54***38 | Handle, Locking (Metric) | 2 |
| 54***00 | Fork, 125w X 40t X 1200l; Use 54***26 Fork.San5357 26/1/95 Gk | 1 |
| 54***26 | Fork, 125w X 40t X 1200l | 1 |
A3-6-3 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 4 |
| 13***6Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 180mm Long | 4 |
A3-2-2 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-17-1 Bucket, Slurry Rehandling, 7'-6"Wide X 50cu/Ft
| 54***01 | Plate, Toe | 1 |
| 54***00 | Bucket, Slurry Rehandling, 7'-6"Wide X 50cu/Ft; Use 98***00 Ref A.Little | 1 |
| 98***00 | Shovel, Slurry/Rehandling, 2290mm Wide, 1.5cu.M | 1 |
A3-6-5 Tow Hitch
| 13***6Z | Bolt | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
A3-23-1 Grab, Log, Fixed Forks, 2 To 3 Ton
| 54***00 | Grab | 1 |
| 54***01 | Frame | 1 |
| 54***03 | Grab, Arm | 2 |
A3-6-6 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
| 13***1Z | Bolt | 2 |
A3-3-1 Guard, 'Q'Fit Carriage
| 54***00 | Guard | 1 |
| 54***00 | Guard, 'Q'Fit Carriage | 1 |
| 82***06 | Stop | 4 |
A3-32-1 Installation, 1.25 Yd, Scrap Grapple Bucket
| 13***4Z | Bolt, 3/8" | 8 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
A3-8-1 Concrete Skip
| 11***00 | Pin, Lynch, With Chain | 1 |
| 54***00 | Skip, Concrete, Assembly | 1 |
| 54***01 | Spring, Shuttle | 2 |
A3-36-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 22 |
A3-19-1 Blade, Scraper, 7'6" (2.29m) Wide
| 54***01 | Plate, Toe | 1 |
| 54***00 | Blade, Scraper, 7'-6"(2.29m) Wide | 1 |
A3-27-1 Fork Retention Kit
| 54***01 | Link, Fork Retaining | 2 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-22-8 Flat 8 Bale Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-9-1 Jib, 4 Metre, Extension
| 14***02 | Screw, Self Tapping | 4 |
| 53***01 | Link, 1.25 Ton | 1 |
| 54***00 | Jib, 4 Metre Extension, Assembly | 1 |
A3-21-1 Fork, Round Bale, 2 Bale Capacity
| 54***00 | Fork, Round Bale, Complete; 98***00 | 1 |
| 54***01 | Fork, Tine | 4 |
| 54***02 | Fork, Tine | 2 |
A3-6-7 Counterweight, With Tow Hitch
| 13***28 | Bolt | 4 |
| 13***8Z | Bolt, M20 X 180mm Long | 4 |
| 13***3Z | Nut | 4 |
A3-6-9 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 2 |
| 13***0Z | Bolt, M20 X 200 | 4 |
| 13***1Z | Bolt | 2 |
A3-1-4 Carriage, 'Q'Fit, 5'-4 1/2" Wide
| 10***15 | Pin, Pivot | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***6Z | Bolt | 2 |
A3-37-1 Sweeper Collector, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-6-2 Counterweight, With Tow Hitch
| 13***8Z | Bolt | 2 |
| 13***8Z | Bolt, M20 X 180mm Long | 2 |
| 13***1Z | Bolt | 2 |
A3-6-4 Tow Hitch
| 13***6Z | Bolt | 2 |
| 13***8Z | Bolt | 2 |
| 14***8Z | Washer | 4 |
A3-22-9 Bale, Grab Hesston
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 1 |
| 54***07 | Kit-Seal | 1 |
| 98***00 | Grab, Bale | 1 |
A3-2-3 Carriage, Fork, Industrial
| 54***00 | Frame, 1500 mm | 1 |
| 54***00 | Fork, Arm 100wx50tx1067l, Class 3b, Fork, Arm 100wx50tx1067l, Class 3b; Not Fitted On Usa Machines. All Forks Are Supplied In Matched Pairs Only And Cannot Be Replaced Individually | 1 |
| 54***00 | Fork, Industrial, 125w X 50t X 1200mm | 1 |
A3-15-1 Bucket, Grain, Potatoe, 90 & 105 Cub.Ft 7'6" & 8'0" Wide
| 54***00 | Bucket, Grain/Potato, 8'-0"Wide X 105cu/Ft; Nsp Ref A.Little | 1 |
| 54***01 | Plate, Toe | 1 |
| 54***00 | Bucket, Grain/Potato, 7'-6"Wide X 90cu/Ft; Nsp Ref A.Little | 1 |
A3-22-1 Fork, Round Bale, With Push Off
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
| 45***00 | Coupling, Female, 3/8" Bsp; Replaced By 45/91***00, See San04893 | 2 |
A3-13-1 Fork, Manure, Silage, With Top Grab, & Push Off Unit, 7'6 "Wide X 65cu.Ft
| 54***00 | Fork, Manure/Silage, & Top Grab Complete; Nla By A Little 19/4/94, San 04924 | 1 |
| 54***01 | Bracket | 2 |
| 54***02 | Fork, Push Off Unit | 1 |
A3-10-2 Crane Hook, Fork Mounted
| 15***00 | Pin | 2 |
| 22***67 | Circlip | 2 |
| 54***00 | Hook, (1 Tonne) Assembly, Fork Mounted | 1 |
A3-36-2 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A3-4-1 Tow Hitch, Hydraulic, Installation
| 10***32 | Pin, Pivot | 2 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt | 2 |
A3-25-1 Pole Handler, With Check Valves, & Diverter Valve Pack
| 54***00 | Attachment, Pole Planter, Complete; Nsp Ref A.Little | 1 |
| 54***01 | Frame, Front | 1 |
| 54***02 | Frame, Rear | 1 |
A3-41-1 Fork, Manure/Silage, With Push Off & Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-4-2 Tow Hitch, Hydraulic, Installation
| 10***32 | Pin, Pivot | 2 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt | 2 |
A3-1-8 Carriage, Side Tilt
| 13***04 | Bolt | 2 |
| 13***06 | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
A3-24-1 Grab, Log, Sliding Forks, 2 To 3 Ton
| 54***09 | Hose | 2 |
| 54***10 | Hose | 2 |
| 54***00 | Grab, Log - Sliding Forks, Complete; Nsp Ref A.Little | 1 |
A3-50-1 Load Guard(Usa Only), For Boom Mntd Side, Tilt Carriages
| 13***4Z | Bolt | 2 |
| 13***04 | Nut | 2 |
| 33***35 | Guard, Load | 1 |
A3-17-5 Bucket, Slurry/Rehandling
| 98***00 | Shovel, Slurry/Rehandling, 2290mm Wide, 1.0cu.M | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A3-42-1 Fork, Manure/Silage, High Capacity
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
| 54***04 | Nut | 9 |
A3-10-1 Crane Hook, Fork Mounted
| 15***00 | Pin | 2 |
| 22***67 | Circlip | 2 |
| 54***00 | Hook, (1 Tonne) Assembly, Fork Mounted | 1 |
A3-52-2 Side Tilt Carriage, Boom Mntd (Usa Only)
| 13***10 | Bolt | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-3-3 Guard, Load
| 13***4Z | Bolt | 4 |
| 13***4Z | Nut | 4 |
| 33***17 | Guard | 1 |
A3-1-2 Carriage, 'Q'Fit, 4' 0" Wide
| 10***15 | Pin, Pivot | 2 |
| 10***24 | Pin, Pivot | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
A3-14-5 Bucket, Grain/Potato, 2290mm Wide
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 1.7cu.M | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A3-6-11 Counterweight, Front, For Direct Mount Side Tilt Carriage
| 13***8Z | Bolt | 2 |
| 13***6Z | Bolt | 2 |
| 13***3Z | Nut, 1" | 2 |
A3-1-7 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter | 2 |
A3-12-2 Fork,Manure,Silage, With Power Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-39-1 Sweeper Collector, Mounting Frame, Q/Hitch/Pin Mount
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A3-3-2 Guard, Load, 'Q'Fit Carriage
| 54***00 | Guard, Load; San 23375.Mss To 33***49 & 83***67.28/2/7, P Gamble. L06/223 | 1 |
| 82***12 | Pin, Lynch | 2 |
| 91***00 | Pin, Retention | 2 |
A3-39-2 Sweeper Collector,, Mounting Frame, Fork Mounted
| 13***2Z | Bolt, M16x50m | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
A3-42-2 Manure/Silage Grab
| 54***02 | Boss | 8 |
| 54***04 | Nut | 8 |
| 61***00 | Hose, 3/8"Bsp X 1000mm | 1 |
A3-31-1 Installation, Manure Fork W/Top Grab
| 13***4Z | Bolt, 3/8" | 6 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
A3-7-1 Installation, Hydraulic Pin Lock, Quickfit Carriage
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 1 |
A3-35-2 12' Truss Boom Q-Fit, Optional
| 15***00 | Stop, Sliding | 1 |
| 33***18 | Boom, Truss | 1 |
| 33***20 | Decal | 1 |
A3-18-1 Blade, Grain Pusher
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 10ft Reach; Nsp Ref A.Little, Resurrected By K Colclough San 03763 | 1 |
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 7ft Reach; Nsp Ref A.Little | 1 |
A3-1-10 Carriage, 'Q'Fit
| 11***20 | Boss, Pivot | 1 |
| 11***24 | Boss, Pivot | 1 |
| 13***0Z | Bolt | 2 |
A3-70-1 Tines
| 99***00 | Fork, Tine | 1 |
A3-16-1 Bucket, Root Crop
| 54***00 | Bucket, Root Crop; Use 98***00 Ref A. Little | 1 |
| 98***00 | Shovel, Root Crop, 2290mm Wide 105 Cu.M | 1 |
| 98***00 | Bucket, Root Crop, 2290mm Wide 2.1 Cu.M | 1 |
A3-26-1 Fork Extensions
| 54***00 | Fork, Extensions, 8ft X 2 Tonne; Nsp Ref A.Little | 1 |
| 54***00 | Fork, Extension, 2.11m Long | 1 |
B Bodywork,Cab,Loader End, Refurbishments
B1-10-2 Guards, Propshaft, Manual Transmission, Suitable For Sway Machines
| 13***0Z | Bolt | 1 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 1 |
| 13***9Z | Screw, M10x35mm | 4 |
B1-16-4 Pads,Non Slip
| 15***95 | Pad, Non Slip | 1 |
| 92***01 | Pad, Anti-Slip | 3 |
B1-1-5 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-3-8 Bodywork, Rear End, Sealing
| 15***01 | Strip, Vertical Mounting | 2 |
| 92***01 | Seal, Strip, 770mm Long | 2 |
| 92***02 | Seal, Strip, 360mm Long | 2 |
B1-12-5 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B1-3-1 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***8Z | Bolt | 4 |
B1-1-11 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-7-1 Tank, Diesel Fuel
| 10***01 | Gasket | 1 |
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***01 | Gasket, Filler Cap | 1 |
B1-1-9 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-2-2 Bodywork, Engine
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***0Z | Bolt | 6 |
B1-1-6 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-5-5 Fender, Rear, Left & Right Hand
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-2-1 Bodywork, Engine
| 12***01 | Stop, Bump | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 2 |
B1-5-6 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 8 |
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
B1-2-3 Bodywork, Engine
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***0Z | Bolt | 6 |
B1-16-2 Pads,Non Slip
| 15***00 | Pad, Non Slip | 1 |
| 92***01 | Pad, Anti-Slip | 3 |
| 92***03 | Strip, Non Slip; Not Illustrated. Not Req'D In North America, Strip, Non Slip | 2 |
B1-3-6 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 6 |
B1-11-4 Fire Extinguisher, 2.5kg
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
B1-6-4 Tank, Hydraulic, & Battery Box
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***17 | Boss | 8 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-1-7 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-3-3 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 2 |
B1-11-2 Fire Extinguisher, 2.5kg
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
| 13***0Z | Bolt | 1 |
| 13***3Z | Nut | 2 |
B1-6-2 Tank, Diesel Fuel, Hydraulic, Combined
| 10***06 | Lock; Supply 12***71 | 2 |
| 10***01 | Gasket; See San 13912.10***01 Similar To 10***01, 10***01 N.L.A. P Gamble. | 1 |
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
B1-1-4 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-5-4 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-11-3 Fire Extinguisher
| 13***3Z | Nut | 2 |
| 14***02 | Screw, No.10 X 1/2" Long | 2 |
| 15***03 | Plate, Mounting | 1 |
B1-11-1 Fire Extinguisher
| 13***03 | Nut | 2 |
| 14***02 | Screw, No.10 X 1/2" Long | 2 |
| 15***01 | Plate, Mounting | 1 |
B1-8-3 Tank, Fuel, & Mounting Step
| 13***8Z | Bolt | 4 |
| 13***4Z | Screw | 2 |
| 13***0Z | Bolt | 1 |
B1-3-2 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 6 |
| 13***0Z | Bolt | 2 |
B1-8-1 Tank, Diesel Fuel, & Mounting Step
| 13***04 | Bolt | 2 |
| 13***06 | Bolt | 2 |
| 13***07 | Bolt | 4 |
B1-13-1 Mounting, Raised Headlight, Right Hand
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
| 13***6Z | Bolt | 1 |
| 13***1Z | Bolt | 2 |
B1-1-8 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-3-5 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 6 |
B1-12-4 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B1-6-8 Tank, Diesel Fuel, Hydraulic, Combined
| 10***01 | Gasket | 1 |
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
| 12***39 | Strainer, Fuel, Gauze | 1 |
B1-12-1 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B1-10-3 Guards, Propshaft, Manual Transmission
| 13***0Z | Bolt | 1 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 1 |
| 13***0Z | Bolt, M12x40 | 8 |
B1-14-2 Stabiliser, Installation
| 10***30 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***30 | Pin, Pivot | 2 |
B1-6-1 Tank, Hydraulic, & Battery Box
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***17 | Boss | 8 |
| 12***01 | Cover | 1 |
B1-3-4 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***8Z | Bolt | 4 |
B1-5-9 Mirrors, Rh Front Fender
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***3Z | Nut | 3 |
| 14***3Z | Washer | 1 |
B1-5-3 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 8 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-6-5 Tank, Diesel Fuel, Hydraulic, Combined
| 10***01 | Gasket | 1 |
| 10***06 | Lock; Supply 12***71 | 2 |
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
B1-12-2 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B1-12-3 Guard, Trash, Inner Boom, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B1-6-6 Tank, Hydraulic, & Battery Box
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***77 | Cover | 1 |
| 12***71 | Padlock | 1 |
B1-14-1 Stabiliser, Installation
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 2 |
| 10***33 | Pin, Pivot | 2 |
| 10***07 | Pin, Pivot 305 Long | 2 |
B1-15-1 Guard, Trash
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B1-1-1 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-16-3 Pads,Non Slip
| 15***00 | G.A. | 1 |
| 92***03 | Strip, Non Slip; Not Illustrated. Not Req'D In North America, Strip, Non Slip | 4 |
B1-6-3 Battery Box & Step
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***4Z | Screw | 2 |
| 13***0Z | Bolt | 1 |
B1-1-3 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis | 1 |
B1-2-8 Engine Cover, Sealing
| 15***04 | Strip, Clamp | 1 |
| 15***05 | Seal, Strip, Bonnet | 1 |
| 15***33 | G.A. | 1 |
B1-5-7 Fender, Front & Rear
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 8 |
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
B1-4-1 Fender, Front, Right Hand
| 13***8Z | Bolt | 2 |
| 13***0Z | Bolt | 1 |
| 13***3Z | Nut | 3 |
B1-10-1 Guards, Propshaft, Manual Transmision
| 13***0Z | Bolt | 1 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 1 |
| 13***9Z | Screw, M10x35mm | 4 |
B1-1-2 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis, Chassis; 525-58, 525-58 F.S. Not M567247 | 1 |
B1-6-7 Tank, Diesel Fuel, Hydraulic, Combined
| 10***01 | Gasket | 1 |
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
| 12***39 | Strainer, Fuel, Gauze | 1 |
B1-5-8 Lens, Reversing
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 4 |
B1-5-1 Fender, Rear, Left & Right Hand
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt | 2 |
B1-16-1 Clamps, Pipe, Machine
| 82***15 | Plate, Cover M6 X 45mm, @ 33mm Crs | 1 |
| 82***16 | Base, Clamp, 25.4mm Hole, M6 X 33mm Crs | 1 |
| 82***17 | Clamp, Top, 25.4mm Hole, M6 X 33mm Crs | 1 |
B1-8-2 Tank, Fuel, & Mounting Step
| 13***06 | Bolt | 2 |
| 13***8Z | Bolt | 1 |
| 13***4Z | Screw | 4 |
B1-5-2 Fender, Rear, Rubber, Left & Right Hand
| 13***8Z | Bolt | 14 |
| 13***1Z | Bolt, M12 X 45mm | 8 |
| 13***4Z | Nut | 14 |
B1-1-10 Chassis
| 11***14 | Boss | 1 |
| 11***10 | Boss | 1 |
| 15***00 | Chassis, Chassis; 525-58, 525-58 F.S. Also M567247 | 1 |
B1-3-9 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 6 |
B1-3-7 Bodywork, Rear End
| 13***2Z | Bolt | 2 |
| 13***0Z | Bolt | 6 |
| 13***2Z | Bolt | 2 |
B2-9-5 Seat Belt, 3"
| 12***52 | Spacer | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 2 |
| 13***3Z | Nut, Lock | 2 |
B2-11-1 Visor, Sun, & Mirror, Rear View
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 13***3Z | Nut | 3 |
| 14***1Z | Washer, 2 Ba | 3 |
B2-7-1 Panel, Instrument, Covers & Brackets,
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 5 |
| 13***8Z | Bolt | 8 |
B2-1-1 Cab Frame
| 12***02 | Plate, Compression | 4 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 6 |
B2-9-3 Seat, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-9-4 Seat, Static Pvc, Canopy Build
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-1-6 Cab Shell
| 15***00 | Hinge, Pin | 4 |
| 15***00 | Pin, Hinge | 1 |
| 15***00 | Pin, Hinge | 1 |
B2-3-1 Windscreen, Hinged
| 12***08 | Bush, Hinge | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B2-3-2 Windscreen, Hinged
| 12***08 | Bush, Hinge | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
| 14***9Z | Washer | 0 |
B2-10-2 Seat Alarm, Installation
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
| 14***2Z | Washer | 1 |
B2-4-1 Guards, Windscreen & Roof
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***8Z | Bolt | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
B2-7-3 Panel, Instrument, Covers & Brackets,
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 5 |
| 13***8Z | Bolt | 8 |
B2-9-2 Seat, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B2-1-5 Cab Shell, Heavy/Duty
| 15***00 | Cab, Heavy Duty | 1 |
| 15***00 | Cab, Tinted Roof Glass | 1 |
| 15***00 | Cab, Clear Roof Glass | 1 |
B2-6-4 Cab Glazing, Safety Frame
| 15***00 | Cab, Safety Frame, Tinted Roof Glass | 1 |
| 15***00 | Cab, Canopy/Safety Frame, Tinted Roof Glass, Cab, Canopy/Safety Frame, Tinted Roof Glass; Grey. Also M567180, M567194, M567208 & M567215 | 1 |
| 15***84 | Cab, Canopy/Safety Frame, Tinted Roof Glass; San 22250.Mss To 15***85,15***88 And, 15***89.Req R Salter 01/03***06 | 1 |
B2-5-2 Mirror, Cab Mounted, Japan
| 12***00 | Bracket | 1 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
B2-2-1 Door & Components
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 2 |
| 12***08 | Bush, Hinge | 4 |
B2-1-4 Cab Shell, Standard
| 15***00 | Cab, W.A. | 1 |
| 15***00 | Cab, Tinted Roof Glass | 1 |
| 15***00 | Cab, Clear Roof Glass | 1 |
B2-1-7 Cab Shell
| 15***00 | Cab, Tinted Roof Glass; Use 15***03, San 03887 | 1 |
| 15***00 | Cab, Clear Roof Glass; Use 15***04, San 03887 | 1 |
| 15***00 | Cab, Canopy/Safety Frame, Tinted Roof Glass, Cab, Canopy/Safety Frame, Tinted Roof Glass; Grey. Also M567180, M567194, M567208 & M567215 | 1 |
B2-10-1 Seat, Optional
| 40***00 | Seat, Fabric,Suspension, Bostrom Viking 301k | 1 |
| 40***02 | Kit-Seat Assembly, Fabric (Seat Only), Cover And Cushion; Nla Removed By San 14113.06/11***03.W Charles, For Cover Set, Use 40/91***81. | 1 |
| 40***00 | Seat, With Alarm | 1 |
B2-8-1 Mats & Fittings, Cab
| 12***05 | Cover, Dark Grey | 1 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 14***02 | Screw | 4 |
B2-5-1 Mirror, Cab Mounted
| 12***00 | Mirror, With Bracket | 1 |
| 12***01 | Bracket | 1 |
| 13***2Z | Bolt | 2 |
B2-9-1 Seat, Standard
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, 5/16" Unf | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B2-10-3 Seat, Suspension, Optional
| 40***02 | Damper | 1 |
| 40***00 | Seat, Vinyl,Suspension, Bostrom Viking 301k | 1 |
| 40***01 | Kit-Backrest, Vinyl | 1 |
B2-1-2 Cab Frame
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 6 |
B2-7-2 Panel, Instrumemt, Covers & Brackets
| 13***2Z | Bolt | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 5 |
| 13***8Z | Bolt | 8 |
B2-6-1 Cab Glazing
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 4 |
| 14***1Z | Washer | 4 |
B2-6-2 Cab Glazing
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 4 |
| 14***1Z | Washer | 4 |
B2-13-1 Blanking Plate, Gear Lever, For Use With Powershift
| 15***50 | Plate, Blanking | 1 |
| 15***49 | G.A. | 1 |
| 82***87 | Retainer, Scrivet; See Note 1. Break Plastic Screw And Fit 14***04, Retainer, Scrivet | 4 |
B2-12-1 Cab Cover
| 99***00 | Cab, Cover | 1 |
B2-6-3 Cab Glazing, Safety Frame
| 15***00 | Cab, Safety Frame, Tinted Roof Glass | 1 |
| 15***00 | Cab, Canopy/Safety Frame, Tinted Roof Glass | 1 |
| 82***62 | Window, R.H Side | 1 |
B2-1-3 Cab Frame
| 12***02 | Plate, Compression | 4 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 6 |
B2-7-4 Cover, Level Guage
| 15***01 | Cover, Blanking | 1 |
| 82***61 | Nut, M4 | 3 |
| 82***11 | Washer, M4'Starloc' | 3 |
B3-1-4 Boom, Inner, Intermediate & Outer
| 12***17 | Bush | 2 |
| 12***18 | Bush | 4 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 3 |
B3-7-5 Pads, Boom Wear
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt, M12 X 30 | 17 |
| 13***0Z | Bolt, M12x40 | 20 |
B3-3-4 Pads, Boom Wear
| 13***8Z | Bolt, M12 X 30 | 12 |
| 13***0Z | Bolt, M12x40 | 8 |
| 13***1Z | Bolt, M12 X 45mm | 6 |
B3-3-3 Pads, Boom Wear
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 12 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 6 |
B3-2-1 Boom, Pivot Pin Location
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 3 |
| 10***30 | Pin, Pivot | 2 |
| 10***43 | Pin, Pivot | 1 |
B3-7-11 Pads,Boom Wear, Nylacast
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 26 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 4 |
| 13***0Z | Screw, Set M12 X 40 Tuf-Lok | 8 |
B3-7-1 Pads, Boom Wear
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 38 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 8 |
B3-7-10 Pads, Boom Wear., Nylacast
| 13***1Z | Bolt, M12 X 45mm | 7 |
| 13***7Z | Bolt, M12x25mm Long,Tuf-Lo, K | 20 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 22 |
B3-1-3 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***0Z | Bolt | 3 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
B3-12-1 Guard, Trash, Inner Boom, Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B3-7-8 Pads,Boom Wear., Nylacast
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 12 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 4 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 6 |
B3-2-2 Boom, Pivot Pin Location
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 3 |
| 10***30 | Pin, Pivot | 2 |
| 10***43 | Pin, Pivot | 1 |
B3-4-1 Indicator, Boom Angle
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 14***4Z | Washer, Spring | 2 |
| 14***9Z | Washer | 1 |
B3-7-9 Pads,Boom Wear, Nylacast
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 8 |
| 13***9Z | Bolt, M12x35mm Lg,Tuf-Lok | 8 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 6 |
B3-10-1 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B3-14-1 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B3-7-4 Pads, Boom Wear
| 13***8Z | Bolt, M12 X 30 | 30 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***0Z | Bolt, M12x40 | 8 |
B3-13-1 Guard, Trash
| 13***9Z | Screw, M10x35mm | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B3-1-10 Boom, Inner, Outer
| 12***19 | Bush, Spring | 2 |
| 13***6Z | Bolt | 3 |
| 13***03 | Nut | 4 |
B3-1-6 Boom, Inner, Outer
| 12***17 | Bush | 2 |
| 12***18 | Bush | 4 |
| 13***6Z | Bolt | 6 |
B3-1-5 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***0Z | Bolt | 3 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
B3-3-5 Pads,Boom Wear, Nylacast
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 12 |
| 13***0Z | Screw, Set M12 X 40 Tuf-Lok | 8 |
| 13***1Z | Bolt, M12x45mm Lg,Tuf-Lok | 6 |
B3-1-1 Boom, Inner, Outer
| 12***19 | Bush, Spring | 2 |
| 13***6Z | Bolt | 3 |
| 13***03 | Nut | 4 |
B3-8-1 Boom, Pivot Pin Location
| 10***25 | Pin, Pivot | 1 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 1 |
| 10***48 | Pin, Pivot | 2 |
B3-11-1 Guard, Trash, Inner Boom, Front
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***3Z | Washer | 2 |
B3-6-1 Boom, Pivot Pin Location
| 10***10 | Pin, Pivot | 1 |
| 10***16 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
B3-9-1 Boom, Pivot Pin Location
| 10***25 | Pin, Pivot | 1 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 1 |
| 10***48 | Pin, Pivot | 2 |
B3-15-1 Intermediate Boom, Hose Guide/Tensioning Pulley System
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-1-8 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
B3-1-2 Boom, Inner, Outer
| 12***19 | Bush, Spring | 2 |
| 13***6Z | Bolt | 3 |
| 13***03 | Nut | 4 |
B3-7-7 Pads, Boom Wear
| 13***8Z | Bolt, M12 X 30 | 12 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 8 |
| 13***0Z | Bolt, M12x40 | 8 |
B3-7-2 Pads, Boom Wear
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 30 | 34 |
| 13***0Z | Bolt, M12x40 | 8 |
B3-7-3 Pads, Boom Wear
| 13***8Z | Bolt, M12 X 30 | 34 |
| 13***0Z | Bolt, M12x40 | 8 |
| 13***1Z | Bolt, M12 X 45mm | 10 |
B3-1-9 Boom, Inner, Outer
| 12***19 | Bush, Spring | 2 |
| 13***6Z | Bolt | 3 |
| 13***03 | Nut | 4 |
B3-7-6 Pads, Boom Wear
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt, M12 X 30 | 22 |
| 13***0Z | Bolt, M12x40 | 12 |
B3-3-2 Pads, Boom Wear
| 13***06 | Bolt | 8 |
| 13***08 | Bolt | 14 |
| 13***10 | Bolt | 20 |
B3-1-7 Boom, Inner, Intermediate & Outer
| 12***18 | Bush | 2 |
| 13***0Z | Bolt | 3 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
B3-3-1 Pads, Boom Wear
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 12 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 2 |
B5-2-4 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-5-10 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-8 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-6 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-2-6 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-5-7 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-3-1 Decals
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B5-2-5 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-4-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-2 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-2-3 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-3-2 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-7-1 Safety Strut
| 15***00 | Strut, Support Lift Ram | 1 |
| 15***00 | Clamp, Bolt | 1 |
| 82***11 | Strip, Edging | 2 |
B5-3-5 Decal, Seat Belt Warning
| 33***44 | Label, Seat Belt Warning | 1 |
| 33***47 | Label, Warning, 'Use The Seat Belt' | 1 |
B5-5-4 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-1-2 Paint History
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 1 |
| 42***05 | Paint, Gloss Yellow, 2.5 Lts | 1 |
B5-4-8 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-1-1 Paint
| 42***01 | Paint, Undercoat Grey, 5 Lts | 1 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 1 |
| 42***03 | Paint, Undercoat Grey, 2.5 Lts | 1 |
B5-5-5 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-9 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-6-1 Tool Kit
| 40***05 | Lubricant, Jcb Special Slide, 400g Cartridge | 1 |
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
B5-10-1 Boom Restraint, Traffic
| 15***77 | Boom, Transport Restraint | 1 |
B5-5-15 Flip Chart, Mounting & Velcro, U.S.A Canopy Only
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
| 15***70 | Strap, Velcro | 1 |
| 15***94 | Mounting, Flip Chart | 1 |
B5-3-9 Decals, Revised Livery
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B5-5-11 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-5-3 Flip Charts
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-2-2 Decals
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***15 | Nameplate, Jcb - Black | 1 |
B5-2-1 Decals
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B5-3-8 Decals, Revised Livery
| 14***9Z | Washer | 4 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
B6-3-1 Homologation Parts, German
| 13***4Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
B6-2-1 Homologation Parts, German, Decals
| 81***59 | Label, Marker | 2 |
| 81***30 | Label, Hydraulic Oil, German | 1 |
| 81***31 | Label, Brake Fluid | 1 |
B6-1-1 Homologation Parts, German
| 12***01 | Strap | 2 |
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 4 |
C Electrics-Machine, Cab &, Engine
C1-17-4 Control Lever Unit, Cab Console, Servo Control, Non-Remote
| 12***00 | Switch, Micro | 1 |
| 13***03 | Screw, Grub M5 X 10 Long | 4 |
| 15***04 | Clamp, Stalk Bottom | 1 |
C1-2-8 Control, Dump
| 13***01 | Nut | 2 |
| 13***08 | Bolt | 2 |
| 14***07 | Washer | 2 |
C1-7-4 Inclinometer, Lev-O-Gauge
| 15***00 | G.A., Inclinometer | 1 |
| 70***00 | Gauge, Inclinometer/Level | 1 |
C1-3-7 Instrument Cluster, 21 Kph, German
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C1-2-15 Instrument Panel, Relays
| 13***3Z | Nut | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-2-5 Instrument Panel, Additional Relays, Basic Servo Machines
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B. Steer Mode | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-2-4 Instrument Panel, Additional Relays, Servo Remote Machines
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B. Steer Mode | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-1-10 Electrical Layout
| 12***99 | Bracket, Mounting | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
C1-15-4 Console, Cab
| 13***5Z | Bolt | 12 |
| 13***3Z | Nut | 12 |
| 13***3Z | Nut, Self Lock, M6 | 12 |
C1-8-6 Light, Working, Boom
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 1 |
| 13***1Z | Nut | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
C1-1-8 Electrical Layout
| 12***99 | Bracket, Mounting | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
C1-16-2 Control Box, Remote, Servo Control
| 13***3Z | Nut | 4 |
| 14***9Z | Washer | 4 |
| 14***01 | Screw, No.6x3/8" Posiflange, Self Tapping | 4 |
C1-8-8 Light, Front
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 36 |
| 13***4Z | Bolt | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
C1-5-3 Indicator, Safe Load
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
C1-6-1 Sensor, Steering
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
C1-20-1 Cable Guide, Remote Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 16 |
| 13***8Z | Bolt | 4 |
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 1 |
C1-5-4 Indicator, Safe Load, Servo
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw, No 8x1/2" | 2 |
| 70***00 | Box, Indicator Control | 1 |
C1-2-2 Instrument Panel
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut | 4 |
C1-17-2 Control Lever Unit, Single Axis
| 70***00 | Valve, Control Assembly, Single Axis Joystick | 1 |
C1-1-1 Electrical Layout
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
C1-3-2 Instrument Cluster
| 70***08 | Seal | 1 |
| 70***16 | Bulb, 12v 1.2w | 15 |
| 70***17 | Bulb, 12v 1.2w C/W Holder | 15 |
C1-23-1 Sensor, Vehicle Attitude
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 15***00 | Bracket | 1 |
| 15***00 | Bracket | 1 |
C1-15-6 Console, Cab, Servo Control, Non-Remote, With 1st Auxiliary
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 12 |
| 13***5Z | Capscrew, M6 X 20 | 12 |
C1-30-1 High Response Valves, Installation, Supplementary Fitment
| 13***4Z | Bolt | 2 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut | 2 |
C1-1-3 Electrical Layout
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
C1-8-10 Light, Front
| 70***00 | Light, Sealed, Left Hand Dip | 2 |
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
C1-7-2 Gauge, Level
| 70***00 | Gauge, Inclinometer | 1 |
| 70***00 | Guage, Inclinometer; Level Guage. Also M567180, M567194, M567208, M567215, M567233, M567247, Guage, Inclinometer | 1 |
| 81***57 | Spring | 3 |
C1-15-12 Console, Cab, Servo Control, Non-Remote, With 1st Aux & Hitch
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 8 |
| 13***5Z | Capscrew, M6 X 20 | 8 |
C1-1-2 Electrical Layout
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
C1-15-7 Console, Cab, Servo Control, Non-Remote, With 2nd Auxiliary
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 8 |
| 13***5Z | Capscrew, M6 X 20 | 8 |
C1-15-10 Console, Cab, Servo Control, Non-Remote, With 1st Auxiliary & Sway
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 8 |
| 13***5Z | Capscrew, M6 X 20 | 8 |
C1-5-1 Indicator, Safe Load
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
C1-17-1 Control Lever Unit, Cab Console, Servo Control
| 70***00 | Valve, Control | 1 |
| 70***01 | Lever | 1 |
| 70***02 | Gaiter | 1 |
C1-25-2 Control Unit, Motion Pack, & Mounting
| 13***0Z | Bolt | 3 |
| 14***3Z | Washer | 3 |
| 15***00 | Bracket | 1 |
C1-14-1 Electrics, Stabiliser
| 14***02 | Washer | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 10 |
| 70***00 | Holder, Warning Light | 1 |
C1-8-1 Light, Front
| 70***00 | Light, Sealed, Left Hand Dip | 2 |
| 70***00 | Light, R.H. Dip; Nla, See San05798 | 2 |
| 70***01 | Lens | 1 |
C1-8-3 Light, Indicator, Side
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 24***02 | Grommet | 1 |
| 70***00 | Light, Side Repeater | 1 |
C1-1-4 Electrical Layout, Servo Control
| 14***01 | Screw, Self Tapping | 2 |
| 15***00 | Bracket, Servo Relay | 1 |
| 15***00 | Bracket, Servo Relay | 1 |
C1-8-11 Light, Reversing, Japanese
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 14***1Z | Washer, Plain | 2 |
| 15***01 | Bracket, Mounting | 1 |
C1-28-1 Dump Valve, 'High Response', Supplementary Fitment
| 13***3Z | Nut | 2 |
| 13***2Z | Screw, Cap, M5 X 50mm; Replaces Aev0030, San 12455 | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
C1-25-1 Control Unit, Motion Pack, & Mounting
| 13***0Z | Bolt | 3 |
| 14***3Z | Washer | 3 |
| 15***00 | Bracket | 1 |
C1-8-16 Light, Front, Rh Dip
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Right Hand Dip | 1 |
C1-8-13 Light, Number Plate
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
C1-26-1 Air Conditioning
C1-8-17 Light, Head Rh Dip
| 24***13 | Grommet, 32mm Dia | 2 |
| 70***00 | Light, Unit, Right Hand Dip | 2 |
| 70***00 | Body, Headlight | 2 |
C1-2-6 Instrument Panel, Relays
| 13***3Z | Nut | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-15-9 Console, Cab, Servo Control, Non-Remote, With 2nd Auxiliary & Sway
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 4 |
| 13***5Z | Capscrew, M6 X 20 | 4 |
C1-13-1 Isolator, Battery
| 13***6Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 4 |
C1-11-1 Switch, Column
| 13***3Z | Capscrew | 2 |
| 14***1Z | Washer, Plain | 2 |
| 15***00 | Lock, Lever | 1 |
C1-12-1 Transmitter, Speed
| 13***2Z | Nut | 1 |
| 24***01 | O Ring | 1 |
| 44***05 | Washer, Seating | 1 |
C1-8-12 Light, Front, Japan
| 15***01 | Body, Headlight L.H.; S/Sd To 70***00 Lamp.15***01 Nla From Sup, Plier.Only 30p More For Cpt Unit.San 14468 | 1 |
| 15***01 | Body, Headlight R.H.; Superseded To 70***00. San 12619 S Shenton | 1 |
| 24***05 | Grommet, Blind,Hole Dia 12.7mm, Panel Thkness 2-3mm | 2 |
C1-1-12 Electrical Layout
| 13***4Z | Bolt | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***1Z | Nut | 2 |
C1-15-3 Console, Cab
| 13***5Z | Bolt | 12 |
| 13***3Z | Nut | 4 |
| 13***3Z | Nut, Self Lock, M6 | 12 |
C1-9-4 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-3-1 Instrument Cluster, All Territories
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
C1-1-15 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
| 71***00 | Plug, Male, Junior Timer | 0 |
C1-3-9 Instrument Cluster, 35 Kph, 'Farm Special Plus'
| 70***00 | Cluster, Instrument Panel, 38kph | 1 |
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
| 70***02 | Gauge, Tachometer | 1 |
C1-1-16 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-1-7 Electrical Layout, Place-Ace Control
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-8-9 Light, Reflector
| 14***02 | Screw, No 8x1/2" | 8 |
| 15***01 | Bracket, Reflector Mounting | 1 |
| 70***00 | Reflector, Amber | 4 |
C1-1-5 Electrical Layout, Place-Ace Control
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-2-1 Instrument Panel
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
| 13***3Z | Nut | 1 |
| 13***3Z | Nut | 9 |
C1-15-8 Electrical Layout, Servo Control, Non-Remote
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 5 |
| 70***00 | Tape, Self-Amalgamating | 0 |
| 71***00 | Relay, Mini, 12v | 1 |
C1-25-3 Control Unit, Motion Pack, & Mounting
| 13***0Z | Bolt | 3 |
| 14***3Z | Washer | 3 |
| 15***00 | Bracket | 1 |
C1-6-4 Sensor,Steering, Front Axle
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***9Z | Screw, M10x35mm | 1 |
| 13***2Z | Nut, M8 | 1 |
C1-24-2 Sensor, Boom Angle
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
C1-18-1 Control Lever Unit
| 70***00 | Valve, Control, Remote | 2 |
| 70***01 | Knob; Use 70***03 Which Combines 70***01 &, 70***02 | 1 |
| 70***03 | Ring, Snap | 4 |
C1-4-1 Electrics, Trailer
| 13***3Z | Nut | 3 |
| 13***8Z | Bolt | 3 |
| 13***3Z | Nut | 3 |
C1-8-14 Light, Reflector
| 14***02 | Screw, No 8x1/2" | 5 |
| 15***00 | G.A. | 1 |
| 15***01 | Bracket | 1 |
C1-3-3 Instrument Cluster, 33 Kph
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
C1-16-1 Control Box, Remote, Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***3Z | Nut | 6 |
| 14***1Z | Washer, Plain | 4 |
C1-3-4 Instrument Cluster, 21 Kph, German
| 70***02 | Bezel | 1 |
| 70***03 | Glass | 1 |
| 70***04 | Seal | 1 |
C1-9-1 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-6-3 Sensor, Steering
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Nut, M8 | 2 |
C1-3-5 Instrument Cluster, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-5-2 Indicator, Safe Load, (Boss Style)
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
C1-2-3 Instrument Panel, Relays
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B. Steer Mode | 1 |
| 71***00 | Relay, Mini, 12v | 3 |
C1-8-4 Light, Front
| 70***00 | Light, Sealed, Left Hand Dip | 2 |
| 70***00 | Light, R.H. Dip; Nla, See San05798 | 2 |
| 70***00 | Body, Head/Side Light; Use 70***00, San 04953 | 2 |
C1-2-9 Control, Dump
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | Pedal, Dump | 1 |
C1-9-5 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-9-2 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-10-3 Light, Combination, Rear
| 13***4Z | Bolt | 2 |
| 15***00 | Guard, Rear Light | 2 |
| 70***01 | Lens, Indicator | 1 |
C1-8-15 Light, Front, Lh Dip
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 1 |
C1-7-3 Gauge, Level
| 15***00 | Bracket, Inclinometer | 1 |
| 70***00 | Guage, Inclinometer/Level | 1 |
| 71***10 | Fuse, 1 Amp, Fuse, 1 Amp; See Note 1 For Fuse Box Cover. Note 1,For Fuse Box Cover See Page B2-7-3, Fuse, 1 Amp; See Note 1 For Fuse Box Cover. Note 1,For Fuse Box Cover See Page B2-6-4 | 1 |
C1-11-5 Switch, Column, Powershift, Transmission
| 13***03 | Screw, Cap | 2 |
| 70***02 | Switch, Right Hand Handle | 1 |
| 70***00 | Switch, Column, Powershift; Replaced By 70***00, See San05831 | 1 |
C1-6-2 Sensor, Steering
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Nut, M8 | 2 |
C1-8-5 Guards, Front Light, Optional
| 14***09 | Screw, Self Tapper, M8 X 2" Long | 8 |
| 26***00 | Guard, Headlight/Indicator | 2 |
C1-19-1 Cable Guide, Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 8 |
| 13***0Z | Bolt | 4 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 2 |
C1-7-1 Gauge, Level
| 70***00 | Gauge, Inclinometer | 1 |
| 70***00 | Guage, Inclinometer; Level Guage. Also M567180, M567194, M567208, M567215, M567233, M567247, Guage, Inclinometer | 1 |
| 81***57 | Spring | 3 |
C1-2-20 Instrument Panel, Relays, Powershift
| 13***3Z | Nut | 1 |
| 70***00 | Alarm, Buzzer | 1 |
| 70***00 | Relay, Box, P.C.B., Steer Mode, Relay, Box, P.C.B., Steer Mode; See T.I. 5/041. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247 | 1 |
C1-24-1 Sensor, Boom Angle
| 13***8Z | Bolt | 2 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 4 |
C1-10-2 Light, Combination, Rear, Fold Down
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt | 4 |
C1-13-2 Isolator, Battery
| 13***6Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 4 |
C1-5-5 Indicator, Safe Load., (Transducer Style)
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw, No 8x1/2" | 2 |
| 70***00 | Box, S.L.I. Control, Pre Emc; See Note 4. Also Fitted To M567180,M567194,M567208, M567215,M567233,M567247, Box, S.L.I. Control, Pre Emc; See C1-5-5. Also Fitted To M567180, M567194, M567208, M567215, M567233, M567247, Box, S.L.I. Control, Pre Emc | 1 |
C1-17-5 Control Lever Unit, 3 Axis
| 70***00 | Valve, Control Assembly, 3 Axis Joystick | 1 |
C1-1-9 Electrical Layout
| 12***99 | Bracket, Mounting | 2 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
C1-1-13 Electrical Layout
| 13***4Z | Bolt | 1 |
| 13***2Z | Bolt | 1 |
| 13***3Z | Screw, M6x16 | 2 |
C1-17-3 Control Lever Unit, 3 Axis
| 70***00 | Valve, Control Assembly, 3 Axis Joystick | 1 |
C1-1-6 Electrical Layout, Place-Ace Control
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-29-1 High Response Valves, Installation, Supplementary Fitment
| 13***4Z | Bolt | 2 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut | 2 |
C1-2-7 Instrument Panel, & Cab Harness
| 12***80 | Bracket, Packhard Retaining | 1 |
| 13***2Z | Bolt | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
C1-21-1 Cable Guide, Remote Servo Control
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 16 |
| 13***8Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
C1-3-6 Instrument Cluster, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-40-1 Boom Float Electrics, (Return To Dig)
| 70***47 | Decal, Float Switch | 1 |
| 70***00 | Microswitch | 1 |
| 70***00 | Switch, Rocker | 1 |
C1-15-2 Console, Cab
| 13***5Z | Bolt | 12 |
| 13***3Z | Nut | 12 |
| 13***3Z | Nut, Self Lock, M6 | 12 |
C1-9-3 Battery & Components
| 10***00 | Clamp | 1 |
| 13***01 | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-15-5 Console, Cab, Servo Control, Non-Remote, Standard
| 12***67 | Wire, Rope | 1 |
| 12***00 | Switch, Micro | 1 |
| 13***3Z | Nut | 1 |
C1-8-2 Light,Front
| 15***00 | Light, Unit, 12 Volt, Rh Dip | 1 |
| 26***00 | Light, Assembly, R.H.Dip | 1 |
| 33***88 | Light, Assembly, L.H.Dip; Replacement Assembly For 70***00 Lh Dip Complet, E With Headlight Unit | 1 |
C1-22-1 Drum Reel Assembly
| 15***00 | Drum | 1 |
| 15***01 | Screw, C/W Washer | 1 |
| 15***02 | Seal, Cover | 1 |
C1-1-11 Electrical Layout
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Screw, M6x16 | 2 |
C1-2-10 Instrument Panel
| 12***80 | Bracket, Packhard Retaining | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 8 |
C1-15-1 Console, Cab, Servo Control
| 12***67 | Wire, Rope | 1 |
| 12***00 | Switch, Micro | 2 |
| 13***7Z | Screw | 2 |
C1-27-1 Alarm, Reverse
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-2-25 Control, Dump
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | G.A. | 1 |
C1-6-5 Sensor,Steering, Rear Axle
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***2Z | Nut, M8 | 1 |
C1-10-1 Light, Combination, Rear
| 13***4Z | Bolt | 2 |
| 15***00 | Guard, Rear Light | 2 |
| 70***01 | Lens, Indicator | 1 |
C1-15-11 Console, Cab, Servo Control, Non-Remote, With 2nd Aux & Hitch
| 13***7Z | Screw | 1 |
| 13***1Z | Nut | 4 |
| 13***5Z | Capscrew, M6 X 20 | 4 |
C1-3-8 Instrument Cluster, 33 Kph
| 70***00 | Cluster, Instrument, 33 K.P.H. | 1 |
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
| 70***02 | Gauge, Tachometer | 1 |
C2-3-6 Alternator, 12volt - 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
C2-3-1 Alternator, A127-65amp 12.Volt
| 71***00 | Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator, Alternator; Lucas Ref. 24158. Type Of Alternator Best Identified By Lucas Ref, Stamped On Body. | 1 |
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-3-2 Alternator, Sealed, A127m-55amp 12.Volt, Optional
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***00 | Alternator, 12volt-55amp Sealed | 1 |
| 71***01 | Capacitor, Suppression-Positive | 1 |
C2-3-3 Alternator, A127-65amp 12.Volt
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***05 | Rectifier | 1 |
C2-1-1 Electrical Equipment
| 02***23 | Switch, Oil Pressure | 1 |
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor; Used With Item 1a. May Also Be Used As Alternative With Item 1, See Note 2., Switch, Vacuum Sensor, Switch, Vacuum Sensor; Used With Item 1a. May Be Used As Alternative With Item 1, Also See Note 2. | 1 |
C2-4-2 Alternator Mountings, 85amp, Optional
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-5-1 Motor, Starter, M127 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-3-4 Alternator, 12volt - 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***00 | Alternator, 85amp | 1 |
C3-8-1 Light, Working, Cab Mounted
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 70***00 | Light, Auxiliary Working | 2 |
| 70***00 | Light, Auxiliary Working; Use 70***00 For L.H.,Use 70***00 For R.H., San 04229 | 2 |
C3-12-2 Condenser, Installation
| 15***81 | 11" Fan & Motor | 1 |
| 15***08 | Kit, Condenser Box | 1 |
| 70***00 | Switch, Binary | 1 |
C3-12-5 Hoses, Air-Con Installation
| 99***04 | Hose, Assembly | 1 |
| 99***74 | Hose, Air Con, Evap/Rec Drier | 1 |
| 99***75 | Hose, Air Con, Evap/Compressor | 1 |
C3-11-1 Face Level Fan, Installation
| 15***78 | G.A. | 1 |
| 15***02 | G.A. | 1 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 5 |
C3-2-2 Motor, Wiper, Fixed Windscreen
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
| 14***02 | Screw | 2 |
C3-5-3 Light Beacon, Strobe Light, Installation
| 13***3Z | Nut | 4 |
| 15***56 | Plate, Mounting | 1 |
| 15***79 | G.A. | 1 |
C3-4-1 Motor, Wiper, Roof Window
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-7-2 Heater, Installation
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 13***2Z | Bolt | 5 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
C3-5-4 Light,Beacon,Hazard, Warning
| 70***00 | Beacon, Amber, Strobe, 12v | 1 |
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C3-11-2 Face Level Fan, Installation
| 13***2Z | Bolt | 2 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut | 2 |
C3-7-1 Heater, Installation
| 13***2Z | Bolt | 5 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
| 13***3Z | Nut | 1 |
C3-10-2 Face Level Fan, Installation
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 5 |
| 71***06 | Fuse, 15 Amp, Fuse, 15 Amp; C3 - Thermostart. On Fastrac 185ti From M636--- - Provides Ether Start Circuit Protection. | 1 |
| 71***00 | Fan, 12 Volt; Replaced By 71***40, See San 10523 | 1 |
C3-5-1 Light, Beacon, Hazard Warning, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Magnetic, (Amber) | 1 |
| 70***01 | Lens, Amber, 146mm Dia | 1 |
C3-10-1 Circuit, Interior Light, Installation
| 70***00 | Light, Interior | 1 |
| 71***00 | Harness, Cab | 1 |
| 71***00 | Harness, Cab Roof & Beacon | 1 |
C3-3-1 Motor, Wiper, Rear Window,Fixed
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-12-4 Hoses, Air Con-Installation
| 99***04 | Hose, Assembly | 1 |
| 99***00 | Hose, Assembly Air Con | 1 |
| 99***00 | Hose, Assembly Air Con | 1 |
C3-5-2 Light, Beacon, Hazard Warning, Yellow, Italian
| 13***3Z | Nut | 4 |
| 14***1Z | Washer, Plain | 4 |
| 15***00 | Beacon | 1 |
C3-2-1 Motor, Wiper, Hinged Windscreen
| 13***3Z | Nut | 2 |
| 14***1Z | Washer | 2 |
| 14***02 | Screw | 2 |
C3-6-1 Heater Assembly
| 15***00 | Heater, Assembly | 1 |
| 15***00 | Heater, Assembly 12v | 1 |
| 15***01 | Motor, 12 Volt | 1 |
C3-3-2 Motor,Wiper,Opening, Rear Window
| 14***02 | Screw | 1 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-12-3 Evaporator, Installation
| 14***11 | Washer | 2 |
| 15***07 | Kit, Evaporator Box | 1 |
| 24***09 | Grommet | 1 |
C3-9-2 Radio, Optional
| 71***00 | Aerial | 1 |
| 71***00 | Speaker, Loud, Set | 1 |
| 71***00 | Lead, Aerial Extension | 1 |
C3-12-1 Air Conditioning, Installation
| 15***06 | Kit, Compressor | 1 |
| 15***07 | Kit, Evaporator Box | 1 |
| 15***08 | Kit, Condenser Box | 1 |
C3-9-1 Radio, Optional
| 70***00 | Lead, Supply | 1 |
| 70***00 | Harness, Earth | 1 |
| 71***00 | Aerial | 1 |
D Controls-Machine,Engine &, Steering
D1-4-4 Lever Lock, Valve Controls, Dual Function Lever Control (Option)
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
D1-1-2 Control, Dump, Transmission
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | Pedal, Dump | 1 |
D1-5-5 Control, Levers, Valve, Dual Function Lever Control (Option)
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
D1-4-2 Lever Lock, Valve Controls
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
D1-1-3 Control, Dump, Transmission
| 13***2Z | Nut | 1 |
| 14***15 | Washer | 1 |
| 15***00 | G.A. | 1 |
D1-4-3 Lever Lock, Valve Control Tilt
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
D1-5-1 Control, Levers, Valve
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
D1-1-1 Control, Dump, Transmission
| 13***01 | Nut | 2 |
| 13***08 | Bolt | 2 |
| 14***07 | Washer | 2 |
D1-10-1 Valve Control Levers, (Return To Dig), Usa 505-19'S Only
| 13***0Z | Bolt | 2 |
| 13***2Z | Bolt | 1 |
| 13***0Z | Bolt | 2 |
D1-4-1 Lever Lock, Valve Controls
| 15***00 | Bracket | 4 |
| 15***00 | Plate, Lock | 2 |
| 15***00 | Bracket, Lock | 1 |
D1-7-1 Valve Control,Levers, Lift/Tilt, Aux1,Extn, Dual Function Lever Control (Option)
| 11***16 | Joint, Universal | 1 |
| 12***01 | Knob | 1 |
| 12***17 | Boss | 1 |
D1-2-2 Control,, Parking Brake
| 13***4Z | Bolt, 3/8"Unf X 2" | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut | 2 |
D1-6-1 Control, Lever, Manual, 2/4wd
| 12***04 | Knob | 1 |
| 12***7P | Bracket, 2wd/4wd Cable, Control | 1 |
| 13***0Z | Bolt | 1 |
D1-8-1 Valve Control,Levers, Lift/Tilt, Aux1,Extn, Dual Function Lever Control (Option)
| 11***16 | Joint, Universal | 1 |
| 12***01 | Knob | 1 |
| 12***17 | Boss | 1 |
D1-4-6 Lever Lock,, Control Tilt.
| 15***52 | Plate, Gaiter | 1 |
| 15***53 | Plate, Lock | 1 |
| 15***19 | Lock, Tilt Lever A.B.I. | 1 |
D1-3-1 Gear Lever
| 12***04 | Knob | 1 |
| 13***2Z | Bolt | 1 |
| 13***8Z | Bolt | 1 |
D1-2-1 Control, Parking Brake
| 13***4Z | Bolt, 3/8"Unf X 2" | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut | 2 |
D1-4-5 Lever Lock, Valve Controls, Dual Function Lever Control (Option)
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
D1-5-2 Control, Levers, Valve
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
D2-2-1 Control, Throttle, Servo Build
| 13***3Z | Nut | 3 |
| 13***4Z | Screw | 3 |
| 14***1Z | Washer, 2 Ba | 3 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 02***17 | Spring | 1 |
D3-2-1 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
D3-1-1 Steering Column
| 11***03 | Clip | 4 |
| 11***08 | Cover | 1 |
| 11***22 | Wheel, Steering; Part Is Mss Use The Following 12***00, 123/, 03842, 12***45. See San03769 | 1 |
D3-2-3 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
D3-2-4 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
D3-2-2 Mounting, Steering Column
| 11***72 | Pin, Locking | 2 |
| 12***16 | Lever | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
D3-1-2 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
E Hydraulics Including Steering
E1-11-1 Circuit, Stabiliser
| 13***7Z | Bolt | 2 |
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
E1-6-2 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-2-2 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 14***19 | Seal, Dowty | 2 |
E1-1-2 Circuit, Neutral
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-10-3 Circuit, Sway Hydraulics
| 14***11 | Seal, Bonded | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Bracket, Hose Guide | 1 |
E1-7-2 Circuit, 2nd Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly | 1 |
E1-5-1 Circuit, Steering
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-6-1 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-1-14 Main Hydraulics, Anti Cavitation, Valve
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
E1-1-1 Circuit, Neutral
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-14-1 Circuit, Auxiliary, Pressure Relief, Servo
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***01 | Bracket, Ball Valve | 1 |
E1-14-2 Circuit, Auxiliary, Pressure Relief, Servo
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***01 | Bracket, Ball Valve | 1 |
| 16***04 | Adapter | 1 |
E1-5-3 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
E1-4-4 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
E1-15-1 Circuit, Auxiliary, Optional, For Use With Hydrapower Attachments
| 13***08 | Bolt | 3 |
| 13***22 | Bolt | 4 |
| 13***03 | Nut | 7 |
E1-10-4 Circuit, Sway Hydraulics
| 14***11 | Seal, Bonded | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 5 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
E1-1-12 Hydraulics, G.A. Servo., Farm Special Plus.
| 02***37 | Gasket | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***7Z | Bolt, M8 X75mm Long | 1 |
E1-1-5 Circuit, Neutral, Anti-Cavitation
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***16 | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 1 |
E1-12-3 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E1-10-6 Circuit, Sway Hydraulics
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
E1-1-11 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-1-16 Auxiliary Pump, 506-36 With Up-Lift, Installation
| 12***06 | Cover, Solenoid | 1 |
| 13***0Z | Bolt, M12x40 | 2 |
| 15***00 | Bracket, Auxiliary Pump | 1 |
E1-12-2 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E1-1-10 Circuit, Neutral, Anti-Cavitation, Servo Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-3-6 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***19 | Seal, Dowty | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 12 |
E1-1-18 Hydraulics, G.A., Farm Special Plus
| 02***37 | Gasket | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
E1-3-3 Circuit, Lift End
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
| 15***01 | Adapter, Banjo | 2 |
| 15***01 | Pipe, Assembly | 1 |
E1-10-1 Circuit, Sway Hydraulics
| 14***11 | Seal, Bonded | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | G.A. | 1 |
E1-10-5 Circuit, Sway Hydraulics
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
E1-13-1 Circuit, Sideshift Carriage
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
E1-3-9 Valve Link Assembly
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 15***01 | Adapter, Banjo | 2 |
| 15***05 | Pipe, Assembly | 1 |
E1-7-3 Circuit, 2nd Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly L.H | 1 |
E1-8-1 Circuit, Tow Hitch
| 13***04 | Nut | 1 |
| 13***3Z | Nut | 2 |
| 13***6Z | Bolt | 2 |
E1-5-2 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-1-13 Main Hydraulics., Anti-Cav Servo +, Farm Special Plus
| 02***37 | Gasket | 1 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***7Z | Bolt, M8 X75mm Long | 1 |
E1-3-4 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 14***19 | Seal, Dowty | 2 |
E1-8-2 Circuit, Tow Hitch
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
| 15***02 | Ring, Sealing | 2 |
| 15***00 | G.A. | 1 |
E1-6-3 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-3-7 Circuit, Lift End
| 14***21 | Seal, Bonded 3/4" Bsp | 10 |
| 15***00 | Pipe, Assembly | 1 |
| 15***00 | Pipe, Assembly | 1 |
E1-6-4 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly Lh | 1 |
E1-11-3 Circuit, Stabiliser
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
E1-1-7 Circuit, Neutral, Anti-Cavitation, Servo Control
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***16 | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 1 |
E1-1-6 Circuit, Neutral
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***26 | Washer, Seal | 2 |
E1-3-5 Circuit, Lift End, With 1st Auxiliary
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
| 15***00 | Pipe, Assembly | 1 |
E1-1-15 Circuit, Neutral, 506-36 With Up-Lift, Servo Control With Auxiliary Pump
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 6 |
E1-4-3 Circuit, Steering, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-1-19 Circuit,Neutral,, Anti-Cavitation,, Servo Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***3Z | Nut, 5/16" Unf | 1 |
E1-7-1 Circuit, 2nd Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly | 1 |
E1-11-4 Circuit, Stabiliser
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 6 |
E1-2-3 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***19 | Seal, Dowty | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 6 |
E1-12-1 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E1-4-1 Circuit, Steering
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-3-1 Circuit, Lift End
| 13***8Z | Bolt | 2 |
| 13***03 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
E1-3-2 Circuit, Lift End
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
| 14***19 | Seal, Dowty | 2 |
E1-9-1 Circuit, Remote Greasing, Rear
| 14***01 | Washer, Aluminium | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 3 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
E1-1-9 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-1-17 Additional Pump, Installation, 'Farm Special Plus'
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Suction; Use 15***53, See T.I. 5/???, B??? N.America, San 04526, For Use With 'Farm Special Plus'. For Extra Circuitry & Additional Pump Installation, See Frame E1-1-17, Pipe, Suction; Use 15***53, See T.I. 5/???, B??? N.America, San 04526 | 1 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-1-4 Circuit, Neutral, Anti-Cavitation, Servo Control
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-1-8 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-1-3 Circuit, Neutral, Anti-Cavitation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-10-2 Circuit, Sway Hydraulics
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
E1-6-5 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Pipe, Assembly Lh | 1 |
E1-7-4 Circuit, 2nd Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Assembly | 1 |
E1-2-1 Circuit, Lift End
| 13***8Z | Bolt | 2 |
| 13***03 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
E1-6-6 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 1 |
E1-11-2 Circuit, Stabiliser
| 13***2Z | Bolt | 6 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 6 |
E1-4-2 Circuit, Steering
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E1-6-7 Circuit, 1st Aux
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-4-5 Circuit, Steering
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***4Z | Bolt, 3/8" | 3 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
E1-12-4 Valve, Isolation, Displacement Ram
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
E2-5-2 Motor, Fan Drive
| 20***00 | Motor, Fan; Ultra Pump. For 'Farm Special Plus' Machines, Refer To Ti 5/85 , See Then Frame E2-5-3, Motor, Fan | 1 |
| 20***01 | Kit-Seal, Fan Motor | 1 |
| 20***02 | Kit, Releif Valve | 1 |
E2-6-3 Motor, Fan Drive, Installation
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E2-2-3 Pump, Main Hydraulic, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 2 |
| 13***4Z | Bolt | 2 |
E2-7-1 Additional Pump, Installation, 'Farm Special Plus'
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 15***00 | Pipe, Suction; Use 15***53, See T.I. 5/???, B??? N.America, San 04526, For Use With 'Farm Special Plus'. For Extra Circuitry & Additional Pump Installation, See Frame E1-1-17, Pipe, Suction; Use 15***53, See T.I. 5/???, B??? N.America, San 04526 | 1 |
E2-1-2 Pump, Main Hydraulic
| 15***55 | Pipe, Feed Pump W/A | 1 |
| 16***10 | Adapter, Includes 'O'Ring | 1 |
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
E2-5-1 Motor, Fan Drive
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 3 |
| 20***00 | Motor; 20/20***00 N/A Use 20/20***00. Housing Stamped Tfu 200/8 | 1 |
E2-2-2 Pump, Main Hydraulic, Fittings & Mountings
| 13***4Z | Bolt | 2 |
| 13***0Z | Bolt, M16 X 40mm | 1 |
| 13***1Z | Bolt, M16 X 220mm | 2 |
E2-8-1 Hydraulic Pump, Engine Mounted
| 02***35 | Gasket | 1 |
| 02***51 | Stud | 1 |
| 02***58 | Nut | 1 |
E2-2-1 Pump, Main Hydraulic, Fittings & Mountings
| 13***08 | Bolt | 4 |
| 13***10 | Bolt | 2 |
| 13***03 | Nut | 2 |
E2-6-1 Motor, Fan Drive, Installation
| 13***7Z | Capscrew | 2 |
| 13***12 | Capscrew | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 3 |
E2-1-1 Pump, Main Hydraulic
| 20***00 | Pump, Hydraulic - 40litre, 40l-27691; Use 20/90***00 & Coupling 15***04 | 1 |
| 20***01 | Gear, Set | 1 |
| 20***03 | Key; Replaced By 20/20***06, See San05154 | 1 |
E2-2-4 Pump, Main Hydraulic, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***2Z | Bolt | 4 |
E2-4-2 Pump, Steering, & Fan Drive, Adapters & Drive Gear
| 12***75 | Gear, Helical 16 Teeth | 1 |
| 13***02 | Nut | 1 |
| 15***09 | G.A. | 1 |
E2-4-1 Pump, Steering, & Fan Drive, Adapters & Drive Gear
| 12***75 | Gear, Helical 16 Teeth | 1 |
| 13***02 | Nut | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
E2-6-2 Motor, Fan Drive, Installation
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E2-5-3 Motor, Fan Drive
| 20***01 | Kit-Seal, Fan Motor | 1 |
| 20***00 | Motor, Fan, With Adjustable Rv. | 1 |
| 20***01 | Kit, Releif Valve; San23518.Ss To 20/95***34.P Gamble 22/05***07, Ref D Allison And J Coleman(Parker) | 1 |
E2-3-1 Pump, Steering, & Fan Drive
| 20***29 | Washer; Replaced By 20/20***01 | 1 |
| 20***08 | Cap | 1 |
| 20***02 | Dowel | 6 |
E2-1-3 Pump, Main Hydraulic
| 20***00 | Pump | 1 |
| 20***01 | Kit-Seal, 40l Pump | 1 |
| 20***02 | Kit, Nut, Washer & Key | 1 |
E2-3-3 Pump, Steering, & Fan Drive
| 12***75 | Gear, Helical 16 Teeth | 1 |
| 13***7Z | Capscrew, Socket Head | 2 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
E2-3-2 Pump, Steering, & Fan Drive
| 20***00 | Pump, Steer/Fan | 1 |
| 20***01 | Kit-Seal | 1 |
| 20***02 | Pump, Front Replacement | 1 |
E3-5-5 Filter,, Hydraulic
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E3-18-1 Valve, Sections, Operating, Proportional Servo
| 13***2Z | Nut, M8 | 0 |
| 15***01 | Lever, Manual Override; Replaced By Nla, See San 12236 Manufacture Drc | 0 |
| 15***01 | Lever, Manual Override | 0 |
E3-20-6 Valve, Relief, Auxiliary
| 25***07 | Valve, Auxiliary Relief, 1900 P.S.I | 1 |
| 25***08 | Valve, Auxiliary Relief, 2000 P.S.I. | 2 |
| 25***09 | Valve, Auxiliary Relief, 2400 P.S.I. | 1 |
E3-9-3 Valve, Selector, Installation
| 13***0Z | Bolt | 2 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***0Z | Bolt | 2 |
E3-2-1 Valve, Components
| 25***09 | Washer | 2 |
| 25***01 | Rod, Tie | 1 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
E3-5-1 Filter, Hydraulic
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***29 | Seal, Dowty | 2 |
E3-1-8 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***24 | Bracket, Support | 1 |
| 25***06 | Washer, Seal | 1 |
E3-15-3 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Proportional, 6-Spool/Stabiliser | 1 |
| 25***00 | Valve, Proportional, 5-Spool With Sway | 1 |
| 25***00 | Valve, Proportional, 6-Spool With Sway | 1 |
E3-7-1 Valve, Steering, Standard
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***04 | Bearing, Front | 1 |
| 35***05 | Bearing; Use 35/40***04 | 1 |
E3-30-5 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***01 | Element, 25 Micron | 1 |
E3-17-1 Valve, Section, Main Components, Proportional Servo
| 25***01 | Spool, Assembly | 1 |
| 25***02 | Valve, Shock, Anti-Cavitation | 1 |
| 25***22 | Body, C/W Check Valve, Body, C/W Check Valve; Auxiliary 1 & 2. Consists Of Item 1 & 8 Only | 0 |
E3-5-4 Filter, Hydraulic
| 13***0Z | Bolt | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***7Z | Washer, Spring | 2 |
E3-2-3 Valve, Components, Extended
| 25***05 | Kit-Tie Rod, 4 Spool, Extended | 1 |
| 25***06 | Kit, Tie Rod, 5 Spool, Extended | 1 |
| 25***07 | Kit, Tie Rod, 6 Spool, Extended | 1 |
E3-20-3 Valve, Section
| 25***07 | Kit, End Plug | 1 |
| 25***10 | Plug, Compensator | 1 |
| 25***11 | Kit-Shim, Compensator | 1 |
E3-20-1 Valve, Assembly
| 14***11 | Seal, Bonded | 4 |
| 16***02 | Adapter, 1/4" Bsp M/M | 4 |
| 25***00 | Restrictor | 2 |
E3-15-4 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Proportional, 6-Spool/Stabiliser | 1 |
| 25***00 | Valve, Proportional 7-Spool, With Sway/Stabiliser | 1 |
| 25***00 | Valve, 5 Spool | 1 |
E3-6-1 Valve, Steering Mode, & Mounting
| 13***10 | Bolt | 2 |
| 13***03 | Nut | 2 |
| 13***03 | Nut | 4 |
E3-9-2 Valve, Selector
| 21***05 | Pin, Split | 2 |
| 24***05 | O Ring | 2 |
| 25***01 | Roller | 1 |
E3-1-3 Valve, Assembly, 5 Spool
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
| 25***0B | Valve, Main Relief, 3500 Psi | 1 |
E3-19-2 Valve Mountings, With Levers
| 13***5Z | Bolt | 1 |
| 13***9Z | Screw, M10x35mm | 3 |
| 13***1Z | Bolt, M12 X 45mm | 3 |
E3-1-10 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***04 | Plate, Valve Top | 1 |
| 25***06 | Washer, Seal | 1 |
E3-19-1 Valve Mountings, With Levers, Proportional Servo Control
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***0Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E3-2-2 Valve, Components
| 25***09 | Washer | 2 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
| 25***06 | Nut | 6 |
E3-1-6 Valve Mounting
| 13***0Z | Bolt | 3 |
| 13***2Z | Bolt | 1 |
| 13***0Z | Bolt | 2 |
E3-6-2 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***1Z | Nut | 2 |
E3-1-7 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***04 | Plate, Valve Top | 1 |
| 25***00 | Valve, Assembly, L,E,A1,T,H/Hitch; Same As 25/96***00 But Supplier Issue Raised, Their Part No.See Pi L96/151 | 1 |
E3-6-9 Valve,Steering Mode, & Mounting
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E3-1-9 Valve Assembly, Dual Function Lever Control (Option)
| 15***02 | Link | 1 |
| 15***04 | Plate, Valve Top | 1 |
| 25***06 | Washer, Seal | 1 |
E3-35-1 Valve Components, Auxiliary, For Use With Hydrapower Attachments
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 2 |
| 25***00 | Valve, Auxiliary | 1 |
| 25***13 | Kit, Stud, One Section | 3 |
E3-6-6 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***1Z | Nut | 2 |
E3-1-4 Valve, Assembly, 7 Spool
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
| 25***0B | Valve, Main Relief, 3500 Psi | 1 |
E3-20-5 Valve, Section, Inlet, Pressure Compensating
| 25***15 | Plug | 1 |
| 25***29 | Spring, Guide | 1 |
| 25***30 | Spring | 1 |
E3-9-1 Valve, Selector, Stabiliser Limit
| 13***10 | Bolt | 2 |
| 13***30 | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
E3-8-1 Valve, Shock, Steering
| 35***00 | Valve, Complete | 1 |
| 35***02 | Valve, Assembly, Shock | 1 |
| 35***03 | Kit-Service | 1 |
E3-6-8 Valve, Steering Mode
| 12***86 | Block | 1 |
| 12***00 | Valve, Assembly, Steer Mode; San 13973. Ref P Bratt & P Gamble. See Pi L98, /130b.See San 22291. | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
E3-30-1 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***01 | Element, 25 Micron | 1 |
E3-6-3 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 1 |
| 13***1Z | Nut | 2 |
E3-6-5 Valve, Steering Mode, & Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Spring | 2 |
E3-21-1 Solenoid Valve, Return To Dig
| 25***00 | Valve, Solenoid | 1 |
E3-16-1 Valve, Sections, End Plate, & Pump Side, Proportional Servo
| 25***01 | Plate, End | 1 |
| 25***03 | Washer | 6 |
| 25***04 | Nut | 6 |
E3-7-4 Valve, Steering, German & Optional
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 4 |
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
E3-1-2 Valve, Assembly, 6 Spool
| 25***00 | Valve, Block 6 Spool | 1 |
| 25***00 | Valve, Assembly 6 Spool; Same As 25/96***00 But Supplier Had Issued, Rasied Their Drg.See Pi L96/151 | 1 |
| 25***06 | Washer, Seal | 1 |
E3-6-4 Valve, Steering Mode
| 12***98 | Block | 1 |
| 12***80 | Bracket, Packhard Retaining | 2 |
| 12***81 | Spacer | 2 |
E3-36-1 Valve Section, Auxiliary, For Use With Hydrapower Attachments
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 1 |
| 25***08 | Kit-Repair, Check Valve | 2 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
E3-7-2 Valve, Steering
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 4 |
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
E3-6-7 Valve, Steering Mode, & Mounting
| 12***01 | Stop, Bump | 2 |
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***1Z | Nut | 2 |
E3-7-3 Valve, Steering, German
| 35***02 | Kit-Repair | 1 |
| 35***00 | Valve, Steering, Integral Shock | 1 |
E3-1-5 Valve, Assembly
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
| 25***0A | Valve, Main Relief, 3200 Psi | 1 |
E3-9-4 Valve, Selector
| 25***00 | Valve, Selector/Diverter; Supersede 25/96***00 To 25/22***94. San 13767 | 1 |
| 25***01 | Pin, Selok | 1 |
| 25***02 | Spring | 1 |
E3-3-1 Valve, Section, Components & Levers
| 13***2Z | Nut | 4 |
| 25***27 | Plate, Seal Retainer | 12 |
| 25***30 | Seat, Spring | 12 |
E3-20-2 Valve, Covers
| 25***01 | Kit, End Cover | 1 |
| 25***02 | Plug | 1 |
| 25***03 | Kit, Tie-Rod, 5 - Section Valves | 1 |
E3-5-2 Filter, Hydraulic
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***29 | Seal, Dowty | 2 |
E3-20-4 Valve, Section, Inlet
| 25***06 | Plug, Sae | 2 |
| 25***26 | Valve, Load Sensing Inlet, Assembly | 1 |
| 25***27 | Spool, Pilot Reducing | 1 |
E3-15-1 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Proportional, 5-Spool With Sway | 1 |
| 25***00 | Valve, Proportional, 4-Spool | 1 |
| 25***00 | Valve, Proportional, 5-Spool | 1 |
E3-15-2 Valve, Assembly, Proportional Servo
| 25***00 | Valve, Proportional, 5-Spool With Sway | 1 |
| 25***00 | Valve, Proportional, 4-Spool | 1 |
| 25***00 | Valve, Proportional, 5-Spool | 1 |
E3-5-3 Filter, Hydraulic, Tank Mounted
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Filter, Element, 25 Micron | 1 |
| 32***02 | Filter, Head | 1 |
E3-1-1 Valve, Assembly
| 25***00 | Valve, Assembly, L,E,A1,T; Same As 25/94***00 But Supplier Has Issue, Raised Their Drg..See Pi L96/151 | 1 |
| 25***06 | Washer, Seal | 1 |
| 25***01 | Kit, Seal, M.R,V & A.R.V | 1 |
E3-2-4 Valve, Components, Standard
| 25***02 | Kit, Tie Rod, Standard, 4 Spool | 1 |
| 25***03 | Kit, Tie Rod, Standard, 5 Spool | 1 |
| 25***04 | Kit, Tie Rod, Standard, 6 Spool | 1 |
E4-1-6 Ram, Lift
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-14-1 Ram, Steering
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***02 | O Ring | 1 |
| 23***04 | O Ring | 1 |
E4-7-10 Ram,Tilt, Boom Float Option
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 1 |
E4-1-11 Ram,Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-15-5 Ram, Manure Fork, With Push Off
| 98***01 | Ram, Assembly | 1 |
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
E4-13-1 Ram, Stabiliser
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***1Z | Washer, 2 Ba | 8 |
E4-7-5 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-12-3 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***19 | Seal, Dowty | 3 |
E4-6-3 Ram,Extension
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 12***24 | Bush | 1 |
E4-3-1 Ram, Displacement
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-11-2 Ram, Extension, Inner
| 12***15 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***3Z | Bolt, M10 X 16 | 3 |
E4-8-5 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***07 | O Ring | 1 |
E4-1-5 Ram, Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-12-4 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***27 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-11-7 Ram, Extension, Inner
| 12***15 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***3Z | Bolt, M10 X 16 | 3 |
E4-19-1 Ram,Strimech, Bale & Clamp, To April 94
| 54***10 | Nut | 1 |
| 54***12 | Piston | 1 |
| 54***14 | Bearing, Gland | 1 |
E4-13-5 Ram, Stabiliser
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 8 |
E4-3-5 Ram, Displacement
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-13-6 Ram, Stabiliser
| 12***17 | Bush | 1 |
| 12***26 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 8 |
E4-21-1 Ram, Manure,Silage, With Grab
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-7-4 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***00 | Pipe | 1 |
E4-5-1 Ram, Extension
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-19-2 Ram,Strimech, Bale & Clamp, From April 94
| 99***03 | Kit-Seal | 1 |
| 99***00 | Ram, Assembly | 1 |
| 99***01 | Cylinder | 1 |
E4-7-6 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***00 | Pipe | 1 |
E4-6-4 Ram, Extension
| 12***15 | Bush | 1 |
| 12***19 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-17-2 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 12***70 | Pipe, Short | 1 |
E4-11-3 Ram, Extension, Inner
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
E4-2-2 Ram, Lift
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Screw | 1 |
E4-7-9 Ram, Carriage Side Tilt
| 13***16 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-4-2 Ram, Displacement
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
E4-9-3 Ram, Steering, Front & Rear Axles
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-11-4 Ram, Extension, Inner
| 12***15 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***3Z | Bolt, M10 X 16 | 3 |
E4-11-1 Ram, Extension, Inner
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***07 | Bolt, M8 X 25 | 2 |
E4-3-7 Ram, Displacement
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-9-5 Ram, Steering, Front & Rear Axles
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***07 | O Ring | 1 |
| 23***04 | O Ring | 1 |
E4-1-4 Ram, Lift
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-16-1 Ram, Carriage, Sideshift
| 90***76 | Adapter, 90 Deg Elbow | 2 |
| 98***08 | Ring, Retaining | 2 |
| 98***09 | Ring, Retaining | 2 |
E4-9-2 Ram, Steering, Rear Axle
| 13***03 | Nut | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
E4-11-6 Ram, Extension, Inner
| 12***17 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***21 | Bush | 1 |
E4-3-4 Ram, Displacement
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-15-1 Ram, Log Grab, Manure Silage Fork, Fixed & Sliding , Bale Grab
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-4-1 Ram, Displacement
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-10-1 Ram, Tow Hitch
| 12***05 | Bush | 1 |
| 24***02 | Seal, Gland | 1 |
| 24***07 | Ring, Wear | 1 |
E4-9-1 Ram, Steering, Front Axle
| 13***03 | Nut | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
E4-7-8 Ram, Carriage Side Tilt
| 13***06 | Bolt | 1 |
| 13***10 | Bolt | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E4-2-3 Ram,Lift, + Float
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Screw | 1 |
E4-11-5 Ram, Extension, Inner
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
E4-1-1 Ram, Lift
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-13-2 Ram, Stabiliser
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***1Z | Washer, 2 Ba | 8 |
E4-1-3 Ram, Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-17-1 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-12-1 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***27 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-18-1 Ram,Box Tipper, Strimech
| 98***30 | Cylinder, Hydraulic | 1 |
| 98***45 | Locknut | 1 |
| 98***46 | Seal, Piston Head; Will Be Provided As A Part Of Seal Kit, 98***54.See San 09107.Ref L Collins/Strimec | 1 |
E4-3-9 Ram, Displacement
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-13-8 Ram, Stabiliser
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
E4-6-1 Ram, Extension
| 12***15 | Bush | 1 |
| 12***19 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-20-1 Circuit, Remote Greasing, Rear
| 14***01 | Washer, Aluminium | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 3 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
E4-3-6 Ram, Displacement
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-5-2 Ram,Extension,Metric
| 12***18 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
E4-8-1 Ram, Sway
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-1-8 Ram, Lift
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-9-7 Ram, Steering, Rear, Jcb Service Option
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-1-2 Ram, Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-13-3 Ram, Stabiliser
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***26 | Bush | 1 |
E4-9-8 Ram,Steering,Front &, Rear Axles.Oleo.
| 14***07 | Nipple, Grease | 1 |
| 23***07 | O Ring | 1 |
| 23***04 | O Ring | 1 |
E4-2-1 Ram, Lift
| 11***04 | Spacer | 1 |
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
E4-8-2 Ram, Sway
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 15***31 | Lug | 1 |
E4-3-3 Ram, Displacement
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-1-10 Ram, Lift
| 12***17 | Bush | 1 |
| 12***25 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-13-4 Ram, Stabiliser
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
E4-7-2 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 15***00 | Pipe, Piston Side | 1 |
E4-9-6 Ram, Steering, Front, Jcb Service Option
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***01 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-8-8 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-7-1 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-12-2 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***19 | Seal, Dowty | 3 |
E4-7-7 Ram, Tilt
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 1 |
E4-6-2 Ram, Extension
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 12***24 | Bush | 1 |
E4-3-2 Ram, Displacement
| 12***21 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-7-3 Ram, Tilt
| 12***15 | Bush | 1 |
| 12***26 | Bush | 1 |
| 13***14 | Bolt | 2 |
E4-10-2 Ram, Tow Hitch
| 12***05 | Bush | 1 |
| 23***02 | O Ring | 1 |
| 23***07 | O Ring | 1 |
E4-16-2 Ram, Carriage, Sideshift
| 54***01 | Ram, Sideshift Carriage | 1 |
| 54***02 | Kit-Seal, Sideshift Carriage, Ram | 1 |
| 54***03 | Cylinder | 1 |
E4-9-4 Ram, Steering, Front & Rear Axles
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***01 | O Ring | 1 |
E4-12-5 Ram, Extension, Outer
| 12***17 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F Axles,Wheels & Transmission
F1-4-2 Knuckle, Steering, & Track Rod
| 13***05 | Bolt | 2 |
| 13***09 | Bolt | 16 |
| 13***5Z | Bolt | 2 |
F1-2-10 Differential Assy, Axle 453/33290
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F1-2-6 Differential, Assembly, Pad Mounted, Limited Slip Differential
| 13***08 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 44***05 | Spacer, Collapsible | 1 |
F1-2-9 Differential, Components, Limited Slip Diff
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F1-1-4 Axle Assembly, Drive, Steering, 3 Piece Pin Mounted, Sway Machines
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-5-3 Shaft, Drive
| 91***01 | Kit-Spider, 93mm Long, 35mm Bearing Dia; Replaced By 91***02 | 2 |
| 91***02 | Yoke, Centre Joint; Replaced By 91***03, See San07225 | 1 |
| 91***03 | Shaft, Wheel Side; Replaced By 91***01 + 82***94 | 1 |
F1-8-1 Axle, Pad Mounted, Shims
| 15***09 | Shim, Axle, 3mm Thick, Shim, Axle, 3mm Thick; See Note 2. Axle Shim | 0 |
F1-2-3 Differential, Assembly, Pad Mounted
| 13***18 | Bolt | 8 |
| 13***08 | Capscrew | 8 |
| 13***07 | Capscrew | 8 |
F1-2-2 Differential, Assembly, Pin Mounted, Sway Machines
| 13***18 | Bolt | 8 |
| 13***08 | Capscrew | 8 |
| 13***07 | Capscrew | 8 |
F1-2-12 Crown Wheel & Pinion, 453/33290 Axle
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-2-1 Differential, Assembly, Pad Mounted
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-1-6 Axle Assembly, Drive, Steering, 3 Piece Pin Mounted, Sway Machines
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F1-3-2 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F1-5-1 Shaft, Drive
| 91***00 | Shaft, Drive, Assembly | 2 |
| 91***01 | Shaft, Wheel Side | 1 |
| 91***02 | Yoke, Differential Side | 1 |
F1-5-2 Shaft, Drive
| 91***01 | Shaft, Wheel Side | 2 |
| 91***04 | Circlip | 8 |
| 91***06 | Yoke, Central | 1 |
F1-6-1 Ram, Sway, Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***23 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
F1-1-3 Axle Assembly, Drive, Steering, 3 Piece Pad Mounted
| 13***2Z | Bolt | 4 |
| 13***4Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
F1-1-2 Axle Assembly, Drive, Steering, 3 Piece Pin Mounted, Sway Machines
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-1-10 Axle Breather
| 45***01 | Breather, Extension | 1 |
| 45***01 | Breather, Extension; Replaced By 45***01, See San05257, Fit To R.H. Side Of Front Axle. It Is Important To Make Sure That The Hole In The Breather Tube Points To The Road Wheel., Breather, Extension; Replaced By 45***01, See San05257 | 1 |
| 45***02 | Plug, Breather | 1 |
F1-4-3 Track Rod, Adjustable
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 45***00 | Rod, Track, Adjustable | 1 |
| 45***01 | Rod, Track, ( Short End ) | 1 |
F1-1-5 Axle Assembly, Drive, Steering, 3 Piece Pad Mounted
| 13***4Z | Bolt | 8 |
| 13***1Z | Nut | 8 |
| 13***3Z | Nut, 1" | 8 |
F1-2-4 Differential, Assembly, Pin Mounted, Sway Machines
| 13***18 | Bolt | 8 |
| 13***08 | Capscrew | 8 |
| 13***07 | Capscrew | 8 |
F1-4-1 Knuckle, Steering, & Track Rod
| 13***05 | Bolt | 2 |
| 13***09 | Bolt | 16 |
| 13***5Z | Bolt | 2 |
F1-4-4 Track Rod, Adjustable
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 45***01 | Rod, Track, ( Short End ) | 1 |
| 45***03 | Nut, Adjusting | 1 |
F1-1-7 Axle Assembly, Drive, Steering, 3 Piece Pin Mounted, Sway Machines
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-5-4 Shaft, Drive
| 91***02 | Yoke, Centre Joint; Replaced By 91***03, See San07225 | 1 |
| 91***03 | Shaft, Wheel Side; Replaced By 91***01 + 82***94 | 1 |
| 91***03 | Circlip | 5 |
F1-7-1 Ram, Steering, Front Axle, Installation
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 91***00 | Pin, Pivot, 105mm X 25mm Dia. | 4 |
F1-1-1 Axle Assembly, Drive, Steering, 3 Piece Pad Mounted
| 13***2Z | Bolt | 4 |
| 13***4Z | Bolt | 4 |
| 13***1Z | Nut | 4 |
F1-2-8 Differential, Assembly, Pin Mounted, Limited Slip Differential
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 44***05 | Spacer, Collapsible | 1 |
F2-1-3 Axle Assembly, Drive, Steering, Pivot Mounted
| 13***09 | Bolt | 14 |
| 13***09 | Screw | 14 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-5-4 Shaft, Drive
| 91***00 | Shaft, Drive, Shaft, Drive; See Note 1. New Driveshafts Interchangeable With Old Whensupplied With 82***94 | 1 |
| 91***00 | Shaft, Drive; See Note 1. New Driveshafts Interchangeable With Old If Using 82***94, Shaft, Drive | 1 |
F2-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-3-2 Hub & Components
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-2-4 Differential, Assembly
| 13***18 | Bolt | 8 |
| 21***12 | Pin, Tension | 2 |
| 44***05 | Spacer, Collapsible | 1 |
F2-2-8 Differential, Components
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Gear Kit | 1 |
F2-1-1 Axle Assembly, Drive, Steering, Pivot Mounted
| 13***08 | Bolt | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
F2-2-3 Differential, Assembly
| 44***05 | Spacer, Collapsible | 1 |
| 44***06 | Gear; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. | 2 |
| 44***07 | Gear, Pinion; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. Lsd 2 Pinion 44***00 | 2 |
F2-4-1 Knuckle, Steering, & Track Rod
| 13***05 | Bolt | 2 |
| 13***09 | Bolt | 16 |
| 13***5Z | Bolt | 2 |
F2-6-1 Ram, Steering, Rear Axle, Installation
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 91***00 | Pin, Pivot, 105mm X 25mm Dia. | 4 |
F2-2-2 Differential, Assembly
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
F2-5-3 Shaft, Drive
| 91***00 | Shaft, Drive Assembly, Btb330; Replaced By 91***00 + 82***94, See San08838 | 1 |
| 91***01 | Kit-Spider, 93mm Long, 35mm Bearing Dia; Replaced By 91***02 | 4 |
| 91***02 | Yoke, Centre Joint; Replaced By 91***03, See San07225 | 2 |
F2-1-2 Axle Assembly, Drive, Steering, Rear Sway
| 13***08 | Bolt | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
F2-9-1 Axle Pivot, Rear, None Overload
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
F2-8-1 Axle Pivot, Rear, None Overload
| 10***01 | Collar | 1 |
| 13***0Z | Bolt | 6 |
| 13***6Z | Bolt | 2 |
F2-5-2 Shaft, Drive
| 82***94 | Circlip, External | 1 |
| 91***04 | Circlip | 8 |
| 91***06 | Yoke, Central | 2 |
F2-7-1 Axle, Rear, Remote Greasing
| 14***01 | Screw | 2 |
| 15***00 | Connector | 2 |
| 15***39 | Pipe, Grease | 1 |
F2-2-1 Differential, Assembly
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-4-2 Knuckle, Steering, & Track Rod
| 13***05 | Bolt | 2 |
| 13***09 | Bolt | 16 |
| 13***5Z | Bolt | 2 |
F2-5-1 Shaft, Drive
| 82***94 | Circlip, External | 2 |
| 91***00 | Shaft, Drive Assembly, 1240.1mm Long; Replaced By Mss 91***00 + 82***94, See San08701 | 1 |
| 91***01 | Shaft, Axle Side, 926.0mm Long | 1 |
F3-3-5 Propshafts, Powershift Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 4 |
F3-1-6 Propshafts, Transmission
| 11***25 | Strap | 2 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
F3-2-1 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly | 4 |
F3-2-7 Wheels & Tires
| 15***01 | Valve, 115 Deg | 1 |
| 16***06 | Wheel, Assembly 17.5-25x12ply, Goodyear | 1 |
| 41***00 | Wheel, Centre | 1 |
F3-2-6 Wheels & Tires
| 15***01 | Valve | 1 |
| 15***01 | Valve, 115 Deg | 1 |
| 15***00 | Wheel, Assembly | 4 |
F3-1-5 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-3-1 Propshafts, Powershift Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 4 |
F3-1-4 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-2-8 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly, Sure Grip, 15.5/80-24x10 Ply, Wheel, Assembly, Sure Grip, 15.5/80-24x10 Ply; 15.5/80-24 Sure Grip Goodyear. Replace With 12 Ply Tyres | 4 |
F3-2-4 Wheels & Tires
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly, Goodyear, 15.5-25x12ply Tract., Wheel, Assembly, Goodyear, 15.5-25x12ply Tract.; See Note 1. Change In Matching Sets.Do Not Mix Tires | 1 |
F3-2-2 Wheels & Tires
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly | 4 |
F3-2-5 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, Firestone, 15.5 - 25 X 12 Ply | 4 |
| 15***00 | Wheel, Assembly, Sure Grip, 15.5/80-24x10 Ply, Wheel, Assembly, Sure Grip, 15.5/80-24x10 Ply; 15.5/80-24 Sure Grip Goodyear. Replace With 12 Ply Tyres | 4 |
F3-2-3 Wheels & Tyres
| 15***01 | Valve | 1 |
| 15***00 | Wheel, Assembly, 15.5 R25, Michelin Xtla | 4 |
| 15***00 | Wheel, Assembly - Firestone, 15.5x25-12 Ply | 4 |
F3-1-2 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-1-3 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F3-1-1 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 8 |
F5-2-6 Transmission, Jcb Syncro Shuttle, Permanenet 4wd Drop Box Components
| 13***08 | Bolt | 1 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-2-2 Transmission, Jcb Syncro Shuttle, Manual 2/4wd & P4wd Drop Box Components
| 13***08 | Bolt | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
| 14***14 | Washer | 1 |
F5-6-4 Gear Change
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
F5-1-2 Transmission, Jcb Syncro Shuttle, 2/4wd Manual Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-2-7 Transmission, Jcb Syncro Shuttle, German Permanent 4wd Drop Box Components
| 13***8Z | Bolt, M10 X 30 | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-10-2 Cooler, Oil, & Installation
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***2Z | Washer | 2 |
F5-4-3 Clutch Reverser Unit, German
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-1-4 Transmission, Jcb Syncro Shuttle, 2/4wd Manual Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-5-1 Transmission, Clutch Unit, Drop Box
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F5-1-3 Transmission, Jcb Syncro Shuttle, 2/4wd Electric Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-3-2 Gearbox Components, Electrical & Manual, Transmissions
| 13***03 | Bolt, M10x16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-2-9 Transmission, Jcb Syncro Shuttle, German 2/4wd Electric Dropbox Components
| 13***8Z | Bolt, M10 X 30 | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-1-7 Transmission, Jcb Syncro Shuttle, Permanent 4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-4-2 Clutch Reverser Unit, Electrical & Manual, Transmissions
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-1-10 Transmission, Jcb Syncro Shuttle, 3 Speed, 2/4wd Electric Control, German
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-1-11 Transmission, Jcb Syncro Shuttle, 3 Speed, 2/4wd Electric Control, German
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-6-1 Gear Change
| 13***05 | Bolt | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***24 | Fork, Selector, 1st & 2nd; Use 44***10 X 4, 44***01 X 1, 44***05 X, 2, 44***02 X 1, 44***04 X 2. | 1 |
F5-1-5 Transmission, Jcb Syncro Shuttle, Permanent 4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-5-2 Transmission, Clutch Unit, Drop Box, German
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F5-2-5 Transmission, Jcb Syncro Shuttle, Electric 2/4wd Drop Box Components
| 13***8Z | Bolt, M10 X 30 | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-3-5 Gearbox Components, 2/4wd Electrical, German
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-2-3 Transmission, Jcb Syncro Shuttle, Manual 2/4wd & P4wd Drop Box Components
| 13***08 | Bolt | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
| 14***14 | Washer | 1 |
F5-10-1 Cooler, Oil, & Installation
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 15***01 | Pipe | 1 |
F5-3-4 Gearbox Components, Permanent 4wd, German
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-1-6 Transmission, Jcb Syncro Shuttle, 2/4wd Electric Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-3-1 Gearbox Components, Electrical & Manual, Transmissions
| 13***05 | Bolt | 8 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-2-1 Transmission, Jcb Syncro Shuttle, Electric 2/4wd Drop Box Components
| 13***08 | Bolt | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-1-9 Transmission, Jcb Syncro Shuttle, 3 Speed Permanent 4wd, German
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-1-1 Transmission, Jcb Syncro Shuttle, 2/4wd Electric & Manual Control
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-6-2 Gear Change
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***24 | Fork, Selector, 1st & 2nd; Use 44***10 X 4, 44***01 X 1, 44***05 X, 2, 44***02 X 1, 44***04 X 2. | 1 |
F5-6-3 Gear Change, German
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***24 | Fork, Selector, 1st & 2nd; Use 44***10 X 4, 44***01 X 1, 44***05 X, 2, 44***02 X 1, 44***04 X 2. | 1 |
F5-8-2 Transmission, Mounting
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F5-2-8 Transmission, Jcb Syncro Shuttle, German 2/4wd Electric Dropbox Components
| 13***8Z | Bolt, M10 X 30 | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-4-1 Clutch Reverser Unit, Electrical & Manual, Transmissions
| 13***02 | Plug, Blanking | 2 |
| 22***57 | Circlip, External | 4 |
| 22***94 | Circlip | 2 |
F5-6-5 Gear Change, German
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
F5-8-1 Transmission, Mounting
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F5-7-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F5-1-8 Transmission, Jcb Syncro Shuttle
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F5-2-4 Transmission, Jcb Syncro Shuttle, Electric 2/4wd Drop Box Components
| 13***08 | Bolt | 10 |
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
F5-3-3 Gearbox Components, Electrical & Manual, Transmissions
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F6-1-9 Gearbox, 4 Speed, 2/4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-1-13 Gearbox, 3 Speed, 2/4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-1-2 Gearbox, 4 Speed, Permanent 4wd
| 13***08 | Bolt | 8 |
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
F6-10-1 Cooler, Oil, & Installation
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 15***06 | Pipe | 1 |
F6-1-1 Gearbox, 4 Speed, Permanent 4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
F6-11-1 Flywheel Housing, Cover Plate
| 13***3Z | Screw, M8 X 16 | 1 |
| 99***00 | Cover, Plate Assembly, Flywheel | 1 |
| 99***01 | Plate, Outer | 1 |
F6-10-2 Cooler, Oil, & Installation
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***2Z | Washer | 2 |
F6-8-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F6-9-1 Transmission, Mounting
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F6-1-6 Gearbox, 3 Speed, Permanent 4wd
| 13***08 | Bolt | 8 |
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
F6-5-2 Shaft, Output Group, 2/4 Wheel Drive
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-3-4 Gearbox Components, 2/4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F6-6-1 Gear Change
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
F6-2-1 Gearbox, External Components, Permanent 4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F6-1-14 Gearbox, 3 Speed, 2/4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-4-1 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F6-6-2 Gear Change, 3 Speed
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
F6-3-2 Gearbox Components, Permanent 4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F6-4-2 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F6-3-1 Gearbox Components, Permanent 4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F6-5-1 Shaft, Output Group, 2/4 Wheel Drive
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-1-10 Gearbox, 4 Speed, 2/4wd
| 13***8Z | Bolt, M10 X 30 | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F6-2-5 Gearbox, External Components, 2/4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F6-3-5 Gearbox Components, 2/4wd
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F6-1-5 Gearbox, 3 Speed, Permanent 4wd
| 13***08 | Bolt | 8 |
| 22***71 | Circlip | 1 |
| 44***09 | Washer, Thrust | 0 |
F6-2-4 Gearbox, External Components, 2/4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F6-2-2 Gearbox, External Components, Permanent 4wd
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F7-2-1 Transmission, Powershift, Complete, 'Farm Special Plus' Only
| 44***00 | Gearbox, Powershift Ps740, P4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
| 44***00 | Gearbox, Powershift Ps740, 2/4wd; Replaced By 46***40, See San 12251 | 1 |
| 44***00 | Gearbox, Powershift Ps740, Ratio 1:1.495 2/4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
F7-5-1 Shaft, Output Group, Permanent 4wd
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F7-8-1 Mainshaft Components, Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
| 44***05 | Plate, Friction | 9 |
F7-13-1 Pipework, Permanent 4wd, Powershift Transmissions
| 44***00 | Pipe, Short; Replaced By Mss 44***00 X1, 16***03 X2,, 14***18 X2 | 1 |
| 44***00 | Pipe, Long; Replaced By Mss 44***00 X1, 16***03 X2,, 14***18 X2 | 1 |
| 81***52 | Plug, Taper 1/4" Bsp | 1 |
F7-14-1 Torque Converter, Drive Plate Kit, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F7-15-1 Transmission, Mounting, Powershift
| 11***09 | Washer | 2 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***24 | Bolt | 2 |
F7-9-1 Layshaft Components, Powershift Transmission
| 13***7Z | Bolt, Coated | 4 |
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
F7-17-1 Cooler, Oil, & Installation
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***2Z | Washer | 2 |
F7-12-1 Pipework, 2/4 Wheel Drive, Powershift Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 44***00 | Pipe; Replaced By 44***00, 81***78, 16***01., See San08667 | 1 |
F7-11-1 Transmission, Powershift, External Components
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 13***8Z | Bolt, M10 X 30 | 19 |
| 13***3Z | Screw, M8 X 16 | 2 |
F7-9-5 Layshaft Components, Powershift Transmission
| 13***7Z | Bolt, Coated | 4 |
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
F7-4-5 Shaft, Output Group, 2/4 Wheel Drive, German
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 10 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F7-4-1 Shaft, Output Group, 2/4 Wheel Drive
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 10 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F7-8-5 Mainshaft Components, Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
| 44***05 | Plate, Friction | 9 |
F7-5-5 Shaft, Output Group, Permanent 4wd, German
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 10 |
| 22***71 | Circlip | 1 |
| 44***12 | Spacer | 1 |
F7-16-1 Cooler, Oil, & Installation
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 15***06 | Pipe | 1 |
F7-10-1 Switch, Solenoid, Powershift Transmission
| 13***8Z | Bolt | 14 |
| 13***1Z | Bolt, M8 X 45; Replaced By 13***1z, See San05502 | 2 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F7-7-1 Clutch, Forward, Powershift Transmission
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F7-1-1 Transmission, Powershift, Complete
| 44***00 | Gearbox, Powershift Ps740, P4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
| 44***00 | Gearbox, Powershift Ps740, 2/4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
F7-6-1 Clutch, Input, Powershift Transmission
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***0Z | Bolt | 4 |
| 20***00 | Pump, Oil, (Rear Seal Not Supplied); Replaced By 20/91***00 | 1 |
F7-3-1 Transmission, Powershift, Complete, German
| 44***00 | Gearbox, Powershift Ps740, P4wd; Replaced By 44***00 + 32/91***00, See San07217 | 1 |
| 44***00 | Gearbox, Powershift Ps740, 2/4wd; Replaced By 44***00 + 32/91***00, See San03217 | 1 |
G Brakes
G1-5-2 Brake, Components, Front Axle
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***13 | Pin, Reaction | 6 |
G1-3-11 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***00 | Reservoir | 1 |
G1-2-3 Brakes, Trailer, Installation
| 13***0Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***6Z | Bolt, M8 X 70 | 1 |
G1-2-4 Brake System, Front
| 13***08 | Bolt | 1 |
| 14***14 | Washer, Star | 1 |
| 14***07 | Washer | 1 |
G1-3-5 Brake Pedal, & Master Cylinder, Servo Installation
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
G1-2-6 Brake System, Rear
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 5 |
| 13***0Z | Bolt | 1 |
G1-3-7 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***00 | Reservoir | 1 |
G1-6-3 Brake, Components, Rear Axle
| 22***45 | Circlip | 2 |
| 45***24 | Plate, Brake Friction; See Ti Gen127 | 6 |
| 45***07 | Plate, Pressure | 2 |
G1-3-4 Brake Pedal, & Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 12***01 | Cap | 1 |
G1-6-2 Brake, Components, Rear Axle
| 22***45 | Circlip | 2 |
| 45***18 | Plate, Friction; Replaced By 45***01 | 6 |
| 45***06 | Piston, Brake; Replaced 45***10, See San06472 | 2 |
G1-3-2 Brake Pedal, & Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
G1-5-1 Brake, Components, Front Axle
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***11 | Plate, Friction; Replaced By Nla. 45***4a + 45***6a Or, (45***1a 2cx 2dx Build) | 10 |
G1-2-7 Brake System,, Front
| 14***4Z | Washer, Star | 1 |
| 15***00 | Nut | 1 |
| 15***00 | Pipe, Brake | 1 |
G1-2-1 Brake System, Front, Sway
| 13***08 | Bolt | 1 |
| 14***14 | Washer, Star | 1 |
| 14***07 | Washer | 1 |
G1-1-1 Brake System, Front
| 13***08 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 15***00 | Adapter, 'T' | 1 |
G1-4-1 Brake, Parking
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***07 | Bolt | 3 |
| 13***04 | Nut | 2 |
G1-6-1 Brake, Components, Rear Axle
| 13***03 | Screw, Set | 4 |
| 22***45 | Circlip | 2 |
| 45***11 | Plate, Friction; Replaced By Nla. 45***4a + 45***6a Or, (45***1a 2cx 2dx Build) | 6 |
G1-3-13 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
G1-3-12 Brake Pedal, & Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 5 |
G1-5-3 Brake, Components, Front Axle
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***13 | Pin, Reaction | 6 |
G1-1-3 Brake System, Front
| 13***08 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 15***00 | Adapter, 'T' | 1 |
G1-3-3 Brake Pedal, & Master Cylinder, Servo Installation
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
G1-3-6 Switch, Relay, Brake Pedal
| 70***00 | Tape, Self-Amalgamating | 1 |
| 71***00 | Relay, Green; Push Power. Qty Has Been Reduced To One Off From M406613, Relay, Green; Front Work Lights (Was 71***00). 71***00 Can Be Used To Relpace The Blue Relays That May Have Been Fitted To Early M/C'S, Relay, Green, Relay, Green; Push Power. Relay Mounting Is Bolted To The Hand Brake Mounting Bracket., Relay, Green; Work Lights, Italian, German Requirement Only. Not Fitted Or Required For Usa Machines., Relay, Green; Work Lights, Italian Germam Reqiurement Only. Not Fitted Or Reqiured On Usa Machines. | 1 |
| 71***00 | Harness, Brake Light Switch | 1 |
G1-3-8 Brake Pedal, & Master Cylinder, Installation
| 12***01 | Filter | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
G1-2-2 Brake System, Rear
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 5 |
| 13***0Z | Bolt | 1 |
G1-3-10 Switch, Relay, Brake Pedal
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 7 |
| 70***00 | Tape, Self-Amalgamating | 1 |
| 71***00 | Relay, Green; Push Power. Qty Has Been Reduced To One Off From M406613, Relay, Green; Front Work Lights (Was 71***00). 71***00 Can Be Used To Relpace The Blue Relays That May Have Been Fitted To Early M/C'S, Relay, Green, Relay, Green; Push Power. Relay Mounting Is Bolted To The Hand Brake Mounting Bracket., Relay, Green; Work Lights, Italian, German Requirement Only. Not Fitted Or Required For Usa Machines., Relay, Green; Work Lights, Italian Germam Reqiurement Only. Not Fitted Or Reqiured On Usa Machines. | 1 |
G1-3-9 Brake Pedal, & Master Cylinder, Installation
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
G1-2-5 Brake System, Front
| 13***8Z | Screw, M8x30 | 1 |
| 14***14 | Washer, Star | 1 |
| 14***7Z | Washer, Spring | 1 |
G1-1-2 Brake System, Front
| 13***08 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 15***00 | Adapter, 'T' | 1 |
G1-4-2 Brake, Parking
| 13***4Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 5 |
| 13***3Z | Nut, Lock, M10 | 4 |
G1-3-1 Brake Pedal, & Master Cylinder, Installation
| 13***2Z | Bolt | 2 |
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
G1-1-4 Brake System,, Front.
| 15***02 | Pipe, Brake L/H | 1 |
| 15***03 | Pipe, Brake L/H | 1 |
| 15***25 | Pipe, Brake R/H | 1 |
N Engines 1000 Series 4-4 & 4-4t
N1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Ab Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N1-8-2 Engine Mountings
| 11***09 | Washer | 4 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 2 |
N1-2-4 Engine, Short, Ab Build
| 02***44 | Engine, Short, 1004-4t | 1 |
| 02***46 | Engine, Short, 1004-4t, Turbocharged | 1 |
N1-1-4 Engine, Complete, Ab, Build
| 01***00 | Engine, Complete, 1004-4t, 102bhp Turbocharged | 1 |
| 01***0R | Engine, Reconditioned, 1004-4t Turbocharged | 1 |
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 102bhp | 1 |
N1-3-1 Block Assembly, Aa & Ab Builds
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-6-2 Timiing Case, Auxiliary Drive, Ab Build
| 02***70 | Gasket | 1 |
| 02***97 | Adapter, Auxiliary Drive | 1 |
| 02***98 | O Ring | 1 |
N1-1-4 Engine, Complete, Ab, , Air/Con Builds
| 01***00 | Engine, Complete, 1004-4t, 102bhp Turbocharged | 1 |
| 01***0R | Engine, Reconditioned, 1004-4t Turbocharged | 1 |
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 102bhp | 1 |
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete, 1004-4, Nat/Aspirated | 1 |
| 01***0R | Engine, Reconditioned, Nat/Aspirated; To M567362 Integral Oil Cooler. As Item 1,But Less,Flywheel & Housing,Starter Motor,Alternator,Fan Drive Housing,Fan Belt | 1 |
| 01***00 | Engine, Complete, 4.40 Nat/Aspirated; Aa50261 Build, With Modene Oil Cooler. Also Fitted To M567180, M567233, M567247. | 1 |
N1-8-1 Engine Mountings
| 11***09 | Washer | 4 |
| 11***01 | Mounting, Metalastik | 2 |
| 13***4Z | Bolt, 1/2" X 3.1/4" Long | 2 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-1-3 Engine, Complete, Ab Build
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 102bhp | 1 |
| 01***0R | Engine, Reconditioned, 1004-4t Turbocharged; Ab50260, Integral Oil Cooler To M567362. As Item 1,But Less,Flywheel & Housing,Starter Motor,Alternator,Fan Drive Housing,Fan Belt | 1 |
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 102bhp | 1 |
N1-1-2 Engine, Complete, Ab Build
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 96bhp | 1 |
| 01***0R | Engine, Reconditioned, 1004-4t Turbocharged; Ab50304, Integral Oil Cooler To M567362. As Item 1, But Less Flywheel Housing,Starter Motor,Alternator,Fan Drive Housing,Fan Belt | 1 |
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 96bhp; Ab50304 Build, With Modene Oil Cooler. Also Fitted To M567194, M567208, M567215. | 1 |
N1-5-1 Fans, Pulleys, & Fan Belt, Aa & Ab Builds
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
N1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ab Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N1-6-1 Timing Case, Camshaft & Gears, Aa & Ab Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
N1-5-2 Fans, Pulleys, & Fan Belt, Ab Build
| 02***79 | Screw | 1 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
N1-7-1 Flywheel, Aa & Ab Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***14 | Washer | 6 |
N1-2-2 Engine, Short, Ab Build
| 02***41 | Engine, Short, Turbo | 1 |
N2-3-2 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***39 | Cap, Oil Filler | 1 |
N2-1-4 Cylinder Head, Ab Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-3-3 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 1 |
| 02***58 | Hose, Oil Breather | 1 |
N2-2-2 Rocker Assembly, Push Rods & Tappets, Ab Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-3-1 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***39 | Cap, Oil Filler | 1 |
N2-1-2 Cylinder Head, Ab Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-2-3 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-4-1 Lifting Plates, Engine, Aa & Ab Builds
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
N3-3-3 Filter, Oil Bath, Optional, Ab Builds
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***2Z | Nut, Lock | 1 |
N3-4-4 Exhaust System, Ab Build
| 13***4Z | Bolt | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***4Z | Nut, Philidas Thin | 4 |
N3-2-2 Manifold, Exhaust, Ab Build
| 02***50 | Gasket | 2 |
| 02***22 | Gasket | 1 |
| 02***76 | Manifold, Exhaust | 1 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***75 | Elbow, Exhaust | 1 |
N3-1-2 Manifold, Induction, Ab Build
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
| 02***09 | Gasket | 1 |
N3-3-2 Filter, Air, Ab Build
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
N3-3-1 Filter, Air, Aa Build
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***3Z | Nut, 5/16" Unf | 4 |
N3-4-3 Exhaust System, Aa Build
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt | 3 |
| 13***3Z | Nut | 3 |
N3-4-1 Exhaust System, Aa Build
| 02***43 | Bolt | 1 |
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt | 3 |
N3-3-5 Filter, Pre-Cleaner, Optional
| 32***00 | Kit-Pre-Cleaner | 1 |
| 32***01 | Ring, Rubber Insert | 1 |
| 32***02 | Clamp, T Bolt Band | 1 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N3-4-2 Exhaust System, Ab Build
| 02***43 | Bolt | 1 |
| 13***4Z | Bolt | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
N3-4-5 Exhaust System, Aa Build
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt | 3 |
| 13***3Z | Nut | 3 |
N3-3-4 Filter, Pre-Cleaner, Optional
| 15***76 | Tube, Extension, Pre-Cleaner | 1 |
| 32***00 | Kit-Pre-Cleaner | 1 |
| 32***01 | Clamp, Band | 1 |
N4-4-2 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-6 Radiator, Fittings & Mountings, 20" Fan, Ab Build
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 6 |
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
N4-4-6 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-8 Radiator, Fittings & Mountings, Optional Open Matrix Radiator, Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 10 |
N4-4-8 Radiator & Hoses,20", Fan Option,Ab Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-7 Radiator, Fittings & Mountings, 20" Fan, Option 102bhp, Ab Build
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 6 |
| 13***8Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
N4-1-1 Pump, Water, Aa & Ab Builds
| 02***80 | Pump, Water | 1 |
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
N4-3-1 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 10 |
N4-4-7 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-4 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 2 |
N4-3-5 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 6 |
| 13***2Z | Bolt | 2 |
N4-4-1 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-4-8 Radiator & Hoses, 20, " Fan, Ab Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-2 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa & Ab Builds
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 1 |
| 02***44 | Housing, Thermostat | 1 |
N4-4-4 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-4-5 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-4-3 Radiator & Hoses, Aa & Ab Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-3-3 Radiator, Fittings & Mountings, Aa & Ab Builds
| 13***4Z | Bolt, 3/8" | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***0Z | Bolt | 6 |
N5-4-2 Filter, Oil, & Oil Feed Adapter, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***23 | Switch, Oil Pressure | 1 |
| 02***94 | Connector | 1 |
N5-5-7 Cooler, Oil, Filter & Pipework, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N5-5-5 Cooler, Oil, Filter & Pipework, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N5-4-1 Filter, Oil, & Oil Feed Adapter, Aa Build
| 02***23 | Switch, Oil Pressure | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
N5-5-6 Cooler, Oil, Filter & Pipework, Ab Build, Farm Special Plus
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N5-5-2 Cooler, Oil, & Pipework, Aa & Ab Builds
| 02***08 | Spring | 1 |
| 02***13 | Connector | 1 |
| 02***14 | Element, Cooling | 1 |
N5-3-1 Piston Cooling Jets, Ab Build
| 02***15 | Jet, Piston Cooling | 4 |
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
N5-1-1 Sump, Oil, Aa & Ab Builds
| 02***60 | Gasket, Oil Sump | 1 |
| 02***66 | Bracket | 1 |
| 02***26 | Spacer | 1 |
N5-5-3 Cooler, Oil, & Pipework, Aa & Ab Builds
| 02***13 | Connector | 1 |
| 02***14 | Element, Cooling | 1 |
| 02***16 | O Ring | 2 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***61 | Shaft, Idler, Oil Pump | 1 |
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
N5-5-4 Cooler, Oil, Filter & Pipework, Aa Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***31 | Olive | 1 |
N5-2-2 Pump, Oil, & Relief Valve, Ab Build
| 02***61 | Shaft, Idler, Oil Pump | 1 |
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
N6-5-1 Pump, Fuel Lift, Aa & Ab Builds
| 02***80 | Gasket | 1 |
| 02***72 | Plate, Keep | 2 |
| 02***23 | Gasket | 1 |
N6-3-8 Fuel System, Auto/Ve, Nt 102bhp, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-3-2 Fuel System, 102bhp,, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-3-5 Fuel System, Automatic Venting, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 6 |
N6-3-3 Fuel System, 102bhp,, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-3-6 Fuel System, Auto/Ve, Nt 102bhp, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-4-3 Filter, Fuel, Aa & Ab Builds
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-3-3 Fuel System, 96bhp,, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-3-8 Fuel System, Auto/Ve, Nt 96bhp, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***81 | Washer | 2 |
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
N6-2-2 Injectors, Fuel, & Injection Pipes, Ab Build, 96bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-2-4 Injectors, Fuel, & Injection Pipes, Ab Build, 96bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 1 |
N6-2-1 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 3 |
N6-1-5 Pump, Fuel Injection, Automatic Venting, 96bhp, Ab Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-1-7 Pump, Fuel Injection, Automatic Venting, 96bhp, Ab Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-3-7 Fuel System, Automatic Venting, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 6 |
N6-1-6 Pump, Fuel Injection, Automatic Venting, 102bhp, Ab Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-3-1 Fuel System, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 6 |
N6-2-3 Injectors, Fuel, & Injection Pipes, Ab Build, 102bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-3-6 Fuel System, Auto/Ve, Nt 96bhp, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-6-2 Filter, Fuel Sediment, Aa & Ab Builds
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
N6-1-3 Pump, Fuel Injection, 102bhp, Ab Build
| 02***81 | Washer | 2 |
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
N6-4-1 Filter, Fuel, Aa & Ab Builds
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-2-5 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-3-4 Fuel System, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 6 |
N6-3-2 Fuel System, 96bhp,, Ab Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 6 |
N6-1-4 Pump, Fuel Injection, Automatic Venting, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-6-1 Filter, Fuel Sediment, Aa & Ab Builds
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
N6-1-2 Pump, Fuel Injection, 96bhp, Ab Build
| 02***81 | Washer | 2 |
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
N7-5-1 Compressor, & Installation, Air Conditioning
| 02***59 | Belt, Drive | 1 |
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***5Z | Bolt | 1 |
N7-3-2 Pump, Vacuum, & Installation, Aa & Ab Builds
| 15***01 | Pipe, Oil Feed | 1 |
| 15***02 | Nut, Union | 2 |
| 15***03 | Olive | 2 |
N7-1-4 Turbocharger, Ab Build, 96bhp
| 02***22 | Gasket | 1 |
| 02***05 | Kit-Repair, Turbo | 1 |
| 02***08 | Housing, Centre Assembly | 1 |
N7-1-6 Turbocharger, Ab Build, 96bhp
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***78 | Housing, Centre Assembly | 1 |
N7-1-2 Turbocharger, Ab Build, 102bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-3-1 Pump, Vacuum, & Installation, Aa & Ab Builds
| 02***35 | Gasket | 1 |
| 02***99 | Adapter | 1 |
| 02***00 | Pump, Vacuum | 1 |
N7-7-4 Heater, Engine Block
| 12***64 | Clamp, Block Heater | 1 |
| 13***4Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
N7-1-1 Turbocharger, Ab Build, 96bhp
| 02***58 | Nut, Lock | 1 |
| 02***60 | Ring, Piston | 1 |
| 02***61 | Shaft, & Wheel Assembly | 1 |
N7-4-1 Pump, Vacuum, Aa & Ab Builds
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 4 |
| 15***13 | Key | 1 |
N7-7-6 Heater, Engine Block
| 12***64 | Clamp, Block Heater | 1 |
| 13***4Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
N7-1-5 Turbocharger, Ab Build, 102bhp
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***60 | Turbocharger | 1 |
N7-6-1 Compressor 12.Volt, Air Conditioning
| 13***5Z | Bolt | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
| 99***00 | Compressor, Air Conditioning | 1 |
N7-1-3 Turbocharger, Ab Build, 96bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-7-7 Block Heater, Heaterless Build
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
N7-7-8 Block Heater, Heater Build
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
N7-7-2 Heater, Engine Block
| 12***64 | Clamp, Block Heater | 1 |
| 13***4Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
N7-2-1 Turbo, Pipework, Ab Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
N7-7-1 Block Heater, Freeze Plug Type, Optional, Aa Build
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
N8-2-2 Kit, Engine Overhaul, Ab Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-1-1 Gasket Sets, Aa Build
| 02***14 | Kit-Gasket, Top | 1 |
| 02***15 | Kit-Gasket, Bottom | 1 |
| 02***74 | Kit-Gasket, Top | 1 |
N8-1-2 Gasket Sets, Ab Build
| 02***84 | Kit-Gasket, Top | 1 |
| 02***15 | Kit-Gasket, Bottom | 1 |
| 02***74 | Kit-Gasket, Top | 1 |
N8-2-4 Kit, Engine Overhaul, Ab Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-2-1 Kit-Engine Overhaul, Aa Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
525-58 F.S serial number reference
On JCB Loadall telehandlers, the machine identification plate is located on the right-hand chassis frame near the operator-cab access step or on the right-hand side of the engine bay. A duplicate serial number is stamped into the main chassis frame between the front and rear axles. Verify the chassis stamp if the plate is unreadable.
| Prefix | Identifies | Notes |
|---|---|---|
| 561001 | Applicability: JCB 525-58 and 525-58 Farm Special telehandlers. Marks the start of the production series covered by JCB Service Manual publication the OEM part reference. | Source: JCB Service Manual the OEM part reference. |
| 0561000 - 0580000 | Applicability: JCB 525-58 and 525-58 FS telehandlers. Numeric range cited for cylinder seal kit compatibility (displacement, boom extension, boom lift, steering, carriage tilt, tow hitch, log grab, carriage sideshift, and loader clam cylinders). | Source: HW Part Store seal kit listings. |
| 566224 | Applicability: JCB 525-58 Farm Special. Specific unit identified as Year 1991. | Source: Vicary Plant Spares inventory record. |
| 566891 | Applicability: JCB 525-58. Specific unit identified as Year 1991. | Source: Vicary Plant Spares inventory record. |
| 570494 | Applicability: JCB 525-58 Farm Special. Specific unit identified as Year 1993. | Source: Vicary Plant Spares inventory record. |
Frequently asked questions
What engine does the JCB 525-58 use?
The Perkins 1004-4 4-cylinder diesel engine delivers 80 HP.
What is the operating weight?
The JCB 525-58 weighs 6.3 tons.
What replaced the JCB 525-58?
Not documented for this exact serial range — verify with your dealer
What 525-58 F.S owners discuss
What engine powers the JCB 525-58 F.S. telehandler?
The JCB 525-58 F.S. is powered by a Perkins 1004-4 four-cylinder diesel engine delivering 80 HP. The engine serial number is typically located on the left side of the engine block near the injection pump. This model is distinct from newer variants that use JCB Diesel by Kohler engines.
What are common power loss symptoms and their causes?
A common issue is losing power under load while driving remains fine. This is often fuel-related. Check the small gauze strainer under the lift pump cover (accessible with a 10mm spanner) for blockage from tank debris. Inspect rubber fuel lines for softening or collapse under pressure. Also check the lift pump diaphragm for perforations and the air supply lines to the injector pump diaphragm for leaks or collapse.
What transmission issues are typical for older JCB telehandlers?
Transmission reliability often degrades around 4,000 hours. Common failures include the forward clutch pack burning out in the shuttle reverser. Symptoms include inability to move forward or backward, or needing to top up the shuttle box oil frequently. Check the shuttle box suction strainer for blockage and ensure the dump spool is adjusted correctly. Parts for these transmissions can be expensive and have long lead times.
What wear patterns should be checked in the undercarriage and steering?
Inspect for slack in the front axle, steering drag link, and track rods by lifting the machine off the floor with the bucket. Budget for rebushing the headstock. Check the function of all 4-wheel steer modes, as sensors may require cleaning. Grease all points regularly as generic JCB spares are not expensive but require maintenance.
What electrical or sensor issues are common?
Electrical faults can cause intermittent operation or failure to start. Check wiring at the back of the alternator and battery connections. Inspect hydraulic ECU connection plugs for good fitment. For machines with digital displays, codes like U1504-88 may indicate communication faults. Ensure the forward/reverse lever microswitches are functioning correctly to activate hydraulic solenoids on the transmission body.
What is the lift capacity and height for the JCB 525-58?
The machine has a lift height of 5.9 meters (just under 20 feet). It has a nominal load capacity of 2.5 tons (5,511 lbs) at the center of gravity. At full forward reach, the capacity is 1 ton. The operating weight is approximately 6.3 tons.
What should be checked when buying a used JCB 525-58 F.S.?
Verify the function of 4-wheel steer modes and clean sensors if necessary. Check for slack in the front axle and steering links. Inspect the shuttle box oil level and strainer. Ensure the machine has hydraulic locking pins for the boom, which can be fitted for improved usability. Confirm the engine serial number location and check for fuel line integrity. Have your dealer verify the transmission condition and warranty status.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 525-58 F.S. Related factory variants of the same model family:
525-58 F.S
Need a specific 525-58 F.S part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.