JCBagriculturaltelescopic handlers (loadall)
Jcb 525-50
Maintenance schedule, common problems & OEM parts breakdown
The JCB 525-50 is a rough-terrain telehandler manufactured from 1998 to 2003, succeeding the earlier Loadall 520-50 and preceding the 525-58 generation. It weighs approximately 5.4 tons (11,905 lb) and is powered by a Perkins 1004-4 turbocharged diesel engine. The machine features a 5-meter (16.4 ft) lift height with a 2.5-ton (5,512 lb) nominal load at the center of gravity and a 1-ton (2,205 lb) capacity at full forward reach. Configurations include standard and 3-mode steer options, with serial numbers ranging from the OEM part reference to the OEM part reference.
The 525-50 represents a transitional generation in JCB's Loadall lineup, bridging the gap between the earlier 520-50 and the higher-capacity 525-58. Its significance in the used market lies in its robust Perkins 1004-4 engine and simple, non-DEF Dieselmax architecture, which appeals to operators seeking reliable, low-maintenance power. The machine's widespread use in agriculture and construction has created a steady demand for its specific service kits, hydraulic components, and Perkins engine parts.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 525-50 specifications
Engine
| Model | Perkins 1004-4 |
| Cylinders | 4 |
| Displacement | 4,402 cm³ (269 in³) |
| Aspiration | Turbocharged |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 5,400 kg (11,905 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | Not documented for this exact serial range — verify with your dealer |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | Not documented for this exact serial range — verify with your dealer |
| Wheelbase | Not documented for this exact serial range — verify with your dealer |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speed | Not documented for this exact serial range — verify with your dealer |
| Lift Height | 5 m (16.4 ft) |
| Rated Operating Capacity (Center of Gravity) | 2,500 kg (5,512 lb) |
| Rated Capacity at Full Forward Reach | 1,000 kg (2,205 lb) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Engine Oil | 15.4 L (4.07 gal) |
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Varies by configuration/series |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
525-50 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 15.4 liters (4.07 US gal) | JCB 10W/30 Multigrade (first 100 hours for new/reconditioned engines); thereafter, JCB-recommended lubricant per ASTM D975-66T Nos. 1D, 2D specifications. |
| Cooling System | 9.35 liters (2.45 US gal) | 55% Antifreeze mixture (starts to freeze at -36° C / -33° F). |
| Fuel Tank | Not documented in source text | Not documented in source text |
| Transmission/Powertrain | Not documented in source text | Not documented in source text |
| Final Drives | Not documented in source text | Not documented in source text |
| Hydraulic System and Tank | Not documented in source text (nominal machine capacity varies by equipment configuration) | Not documented in source text |
| Axles/Differentials | Not documented in source text | Not documented in source text |
| Grease | Not applicable | Lithium based, No. 2 consistency. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 525-50 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 525-50 beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid analysis at the 500-hour interval is critical for the JCB 525-50. Sample engine oil, hydraulic fluid, and axle oil to detect early wear. The Perkins 1004-4 engine relies on clean fuel; inspect the hydraulic return filter magnet for metallic debris during every 500-hour service. Monitor coolant concentration to prevent freezing at -36° C (-33° F) and check the turbocharger shaft play at 1000 hours to prevent boost leaks. Track tire pressure at 40 bar (58 lbf/in²) to ensure stability during lifting operations.
Corrective & Common Repairs
Common repairs on the 525-50 involve the Syncro Shuttle transmission and the main hydraulic pump. Inspect the transmission filter for sludge during the 1000-hour service to prevent valve sticking. Check the alternator and starter motor load to avoid electrical failures. Replace the outer and inner air filter elements to protect the Perkins 1004-4 intake. Inspect the brake disc wear and immersed brake condition to ensure safe stopping power. Address any kingpost pivot wear to maintain boom alignment and prevent hydraulic ram binding.
Overhaul & Rebuild Points
The 2000-hour interval marks the primary overhaul point for the JCB 525-50. Drain and clean the hydraulic tank to remove sediment that can damage the main pump. Measure swing ring play to determine if the slew bearing requires replacement. Inspect the boom wear pads and replace if worn to prevent metal-to-metal contact. Check the injector spray patterns and replace any leaking or poorly atomizing injectors. Inspect the chassis and side frames for structural cracks, particularly around high-stress weld points, before they propagate.
Seasonal & Environment Servicing
In cold climates, ensure the coolant mixture provides protection down to -36° C (-33° F). Use JCB 10W/30 multigrade oil for the first 100 hours of a new or reconditioned engine, then switch to the recommended lubricant. Grease all pivot points more frequently in dusty environments. Inspect the cab HVAC system, including the cabin filter and evaporator, to maintain operator comfort. Check the battery electrolyte level on non-sealed units and ensure the battery is securely mounted to prevent vibration damage.
525-50 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/912001 | Element, Fuel Filter, Canister Type | Fuel system service | Check fitment → |
| 32/925371 | Element, Fuel Sediment Filter | Fuel system service | Check fitment → |
| 32/925543 | Filter, Fuel Sediment | Fuel system service | Check fitment → |
| 17/919300 | Pump, Electric Fuel Lift, Filter Assembly | Fuel system service | Check fitment → |
| 32/913601 | Element, Air Filter, Main | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
525-50 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Fuel supply restriction, failing lift pump, or leak in high-pressure circuit | Check fuel filter condition and fuel line integrity; verify lift pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Short to ground in sensor wiring, faulty sensor, or poor connector contact | Inspect sensor wiring harness for damage; check connector pins for corrosion |
| P0112 | Intake air temperature sensor circuit low voltage | Short to ground in IAT sensor circuit or failed sensor | Check wiring continuity and connector integrity at the intake manifold sensor |
| P0190 | Fuel pressure sensor circuit malfunction | Open circuit, short to battery, or faulty sensor in the fuel rail | Verify sensor power and ground; inspect wiring for chafing or breaks |
| P0335 | Crankshaft position sensor no signal | Failed sensor, damaged tone ring, or open wiring circuit | Check sensor gap and wiring; inspect crankshaft pulley/tone ring for damage |
| P0201 | Injector circuit open – 1st cylinder | Broken injector wire, loose connector, or failed injector coil | Inspect injector connector and wiring harness; swap injectors to isolate fault |
| P0321-87 | CAN bus message error for engine speed from engine ECU | CAN bus communication fault, ECU wiring issue, or sensor signal loss | Check CAN bus wiring connections and integrity; verify ECU power and ground |
| P0102 | MAF sensor low voltage fault | Dirty or failed Mass Air Flow sensor, or intake air leak | Clean MAF sensor; check for unmetered air leaks in intake ducting |
| P0252 | Fuel metering device (cam/rotor) range/performance | Faulty high-pressure fuel pump metering valve or control circuit issue | Inspect pump wiring and connectors; verify fuel pump operation |
| P0336 | Crank sensor signal fault | Intermittent signal from crankshaft position sensor or wiring issue | Check sensor mounting and wiring for intermittent shorts or opens |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
525-50 attachments & work tools
Standard Fork Carriers
The JCB 525-50 utilizes a standard fork carrier configuration with two standard prongs as the baseline setup for material handling tasks. This configuration serves as the reference point for the machine's nominal load capacity specifications.
Quickhitch Systems
Compatible quickhitch options include the JCB Q-fit system, compact tool carrier, and skid steer mounting interfaces. These systems support optional hydraulic pin locking mechanisms to facilitate rapid attachment changes and secure tool retention.
Skid Steer Mounting Plates
Aftermarket skid steer mounting plates are available for the JCB 525-50, designed to be welded directly to attachments or buckets. These plates allow the telehandler to utilize a wide range of skid steer-compatible tools such as buckets, grapples, and breakers.
Hydraulic Auxiliary Services
The machine supports single or double auxiliary hydraulic services to operate powered attachments. The total hydraulic system capacity varies depending on the specific equipment and attachments installed on the telehandler.
Lifting and Material Handling
The JCB 525-50 is designed for palletized loads and equipment with a nominal load at the center of gravity of 2.5 tons. It provides a lifting height of 5 meters and maintains a capacity of 1 ton at full forward reach.
Engine and Powertrain
The telehandler is equipped with a turbocharged engine with a displacement of 269 cubic inches (4,402 cubic centimeters). It utilizes a synchroshuttle transmission to provide smooth maneuverability and directional changes via a shuttle lever or joystick-mounted switch.
Fluid Specifications
The engine requires 15.4 liters of oil for full capacity, with JCB 10W/30 multigrade recommended for the first 100 hours of operation. Coolant mixtures are specified with 55% antifreeze providing freeze protection down to -36° C (-33° F).
Machine Weight and Dimensions
The operating weight for the JCB 525-50 is documented at 5.4 tons (approximately 7,500 kg). Transport dimensions include a length of 12 ft 9 in (0.23 m), width of 7 ft 0 in (0 m), and height of 7 ft 11 in (0.28 m).
All 525-50 assemblies by section
Every catalogued assembly group for the Jcb 525-50. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-4-1 Guard, Tooth, 1750mm Wide
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 27***00 | Guard, Tooth, 1750mm | 1 |
| 81***54 | Label, Outline Sticker L.H. | 1 |
A1-3-1 Shovel, Clam, 6 In 1, 0.5cu.M., 1750mm (5'9") Wide
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Bolt, M8 X 90mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
A1-5-2 Tooth & Toeplate, Option, 1750mm Wide Shovel
| 13***01 | Nut | 7 |
| 13***1Z | Nut | 14 |
| 14***11 | Washer | 7 |
A1-11-2 Shovel, Grain/Potato, 2.08m3
| 98***72 | Shovel, Grain/Potato, 2290mm Wide | 1 |
| 98***82 | Toe Plate 7'6" | 1 |
A1-2-3 Shovel,1.0 Cu.M, 2050 Wide
| 13***1Z | Nut | 2 |
| 33***83 | Shovel, G.P. 1.0 Cu.M, 2050 Wide | 1 |
| 33***71 | Toeplate | 1 |
A1-2-2 Shovel,0.9cu.M, 2000mm Wide, For Teeth Adaption
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***01 | Nut | 12 |
| 26***00 | Guard, Tooth | 1 |
A1-2-1 Shovel,0.7cu.M., 2.0 Metre Wide
| 29***60 | Toeplate | 1 |
| 51***00 | Bucket, W.A. | 1 |
| 52***00 | Kit, Tooth Assembly | 1 |
A1-1-1 Shovel G.P. 0.7 Cu.M
| 13***1Z | Nut | 7 |
| 27***22 | Tooth | 7 |
| 29***65 | Toeplate | 1 |
A1-4-3 Guard,Tooth
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 13***1Z | Nut | 2 |
| 14***1Z | Washer, M16 Plain | 4 |
A1-10-1 Shovel Transit Brkts
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 33***31 | Bracket, Shovel Securing | 2 |
A1-3-2 Shovel,Clam 6 In 1, 0.7m3 (1950mm Wide)
| 13***8Z | Screw, M8x30 | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 10 |
A1-6-1 Toeplate,Bolt On, 2000mm Wide
| 13***1Z | Nut | 16 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 16 |
| 29***63 | Toeplate | 1 |
A1-10-2 Shovel Restraint
| 13***4Z | Bolt, M16x60 | 4 |
| 13***1Z | Nut | 4 |
| 14***29 | Retainer, Shovel | 2 |
A1-5-1 Toeplate, Bolt On, 1750mm
| 13***7Z | Bolt; New Standard.27/3/96 M24 X 75mm | 2 |
| 13***1Z | Nut | 13 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 13 |
A1-4-2 Guard,Tooth
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***1Z | Nut | 2 |
| 14***9Z | Washer | 2 |
A1-1-2 Shovel G.P., 0.7cu.M
| 13***1Z | Nut | 7 |
| 27***22 | Tooth | 7 |
| 29***65 | Toeplate | 1 |
A3-7-1 Muck Fork
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 1 |
| 98***62 | Fork, Muck | 1 |
A3-7-8 Multi-Shovel, With Top Grab, Tool Carrier
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 8 |
A3-20-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
A3-10-2 Hydraulic Hitch, Service Kit, Non-Lighting M/C
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***1Z | Bolt, M10 X 10 | 2 |
A3-30-1 Manure/Silage Grab
| 54***02 | Boss | 8 |
| 54***04 | Nut | 8 |
| 61***00 | Hose, 3/8"Bsp X 1000mm | 1 |
A3-4-1 Tow Hitch, Manual, 5 Ton
| 10***03 | Wire, Retaining | 1 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 2 |
A3-10-3 Hydraulic Hitch, Service Kit, (1/2"Bsp Fittings)
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***1Z | Bolt, M10 X 10 | 2 |
A3-6-2 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-2-6 Tool Carrier (Hyd)
| 13***7D | Setscrew, M8x25 | 5 |
| 13***2D | Setscrew, M8 X 50 | 1 |
| 13***0D | Setscrew, M10 X 40mm | 2 |
A3-5-1 Grab, Industrial Grapple
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 90***00 | Ram | 2 |
| 90***06 | Kit, Seal | 1 |
A3-35-1 Brickmaster
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 2 |
| 33***31 | Counterweight, Wa | 1 |
A3-11-1 Crane Hook, & Mounting
| 13***7Z | Screw, Cap | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 99***00 | Attachment, Crane | 1 |
A3-2-4 Tool Carrier, (Twin Aux)
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***4Z | Bolt, M8 X 60 | 1 |
| 13***1Z | Bolt | 2 |
A3-10-4 Hydraulic Hitch, Service Kit, Non-Lighting (1/2"Bsp Fittings)
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***1Z | Bolt, M10 X 10 | 2 |
A3-1-1 Fork Frame & Forks
| 13***9Z | Bolt, M12x90mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***00 | Handle, Locking (Metric) | 1 |
A3-13-1 Wrapped Bale Clamp
| 82***56 | Bolt | 1 |
| 82***57 | Bolt C/W Nut | 2 |
| 82***58 | Bolt, Hexagonal | 2 |
A3-1-5 Carriage, (Matbro)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***2Z | Bolt, M8x50 | 1 |
| 13***0Z | Bolt, M10 X 100 | 2 |
A3-15-1 Fork,Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 98***00 | Fork, Round Bale | 1 |
A3-2-2 Tool Carrier (Hyd)
| 13***7Z | Screw, Hexagon M8 X 25 | 5 |
| 13***2Z | Bolt, M8x50 | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
A3-2-9 Tool Carrier, Aux Service, Bobcat Couplings
| 13***7D | Setscrew, M8x25 | 2 |
| 13***2D | Setscrew, M8 X 50 | 1 |
| 13***0D | Setscrew, M10 X 40mm | 2 |
A3-25-1 Silashear
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-6-1 Fork Frames & Forks, Industrial
| 51***00 | Frame, Fork Industrial | 1 |
| 54***00 | Fork, Arm, 125wx50tx1200l, Class 3b | 1 |
| 54***00 | Fork, Arm 100wx50tx1067l, Class 3b, Fork, Arm 100wx50tx1067l, Class 3b; Not Fitted On Usa Machines. All Forks Are Supplied In Matched Pairs Only And Cannot Be Replaced Individually | 1 |
A3-9-1 Heston Bale Grab
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***01 | Frame, Sliding | 1 |
A3-40-1 Kits, Attachments
| 29***00 | Kit, Non-Light To Light, Lh Dip | 1 |
| 29***00 | Kit, Non-Light To Light, Rh Dip | 1 |
| 29***48 | Kit, Air Con | 1 |
A3-7-6 Multi-Fork, With Top Grab, Spring Tines
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 80mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
A3-28-1 Frame, Q/Htitch, 7' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
A3-8-2 Grain/Potato Bucket
| 33***53 | Toeplate, Weld On 1980mm | 1 |
| 33***01 | Toeplate, Reversible (Bolt On) | 1 |
| 98***00 | Shovel, Grain/Potato, 1850mm Wide | 1 |
A3-2-3 Tool Carrier (Mech), Aux Service
| 13***7D | Setscrew, M8x25 | 2 |
| 13***2D | Setscrew, M8 X 50 | 1 |
| 13***0D | Setscrew, M10 X 40mm | 2 |
A3-2-1 Tool Carrier (Mech)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***2Z | Bolt, M8x50 | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
A3-10-1 Hydraulic Hitch, Service Kit
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***1Z | Bolt, M10 X 10 | 2 |
A3-3-2 Tow Hitch, Hydraulic, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 13***02 | Nut | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
A3-2-7 Tool Carrier (Mech), Aux Service
| 13***7D | Setscrew, M8x25 | 2 |
| 13***2D | Setscrew, M8 X 50 | 1 |
| 13***0D | Setscrew, M10 X 40mm | 2 |
A3-3-1 Tow Hitch, Hydraulic
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
A3-8-3 Carriage, Sideshift
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 45***49 | Coupling, Female, 3/4"Unf | 1 |
| 45***50 | Coupling, Quick Release,Male, 3/4"Unf | 1 |
A3-6-5 Bracket, Q/Hitch Conversion
| 98***43 | Bracket, Hanger Plates | 1 |
A3-7-7 Multi-Fork, With Top Grab, Standard Tines
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 80mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
A3-7-10 Fork Manure, Spring Tines
| 54***02 | Boss | 9 |
| 54***04 | Nut | 9 |
| 81***02 | Plate, Data | 1 |
A3-8-1 Grain Bucket
| 51***02 | Kit-Nut & Bolt, M20 | 14 |
| 98***01 | Toeplate, Weld On | 1 |
| 98***02 | Toeplate, Weld On | 1 |
A3-17-1 Muck Forks & Grabs, Varieties
| 33***88 | Frame, & Fork Assembly, Hardox, Loadall Quickhitch | 1 |
| 98***23 | Fork, Assembly, Power Grab, Loadall Quickhitch | 1 |
| 98***38 | Fork, Assembly, Power Grab, Loadall Quickhitch | 1 |
B Bodywork, Cab, Loader End
B1-7-1 Hitch Recovery, Manual
| 13***6Z | Bolt, M20 X 70 | 4 |
| 14***2Z | Washer, M20 | 4 |
| 15***00 | Pin | 1 |
B1-5-2 Cover, Engine
| 12***55 | Handle | 1 |
| 12***87 | Handle, Locking | 1 |
| 13***3Z | Screw, M6x16 | 6 |
B1-10-2 Soundproofing, Engine
| 29***30 | Panel, Soundproof | 1 |
| 33***06 | Panel, Sound Proof | 1 |
| 33***71 | Panel, Bonnet Front | 1 |
B1-2-1 Bodywork, Fenders,Mirrors, & Brackets Etc
| 13***7Z | Bolt, M10x25 | 7 |
| 13***8Z | Bolt, M10 X 30 | 5 |
| 13***9Z | Bolt, M8 X 35mm | 4 |
B1-1-2 Chassis, (Tier One Engine)
| 13***7D | Setscrew, M12 X 25 | 4 |
| 13***0D | Bolt, M6x40 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
B1-5-4 Cover,Engine, (Tier One Engine)
| 12***55 | Handle | 1 |
| 12***87 | Handle, Locking | 1 |
| 13***3Z | Screw, M6x16 | 6 |
B1-10-7 Soundproofing, Engine, (Tier Two)
| 33***69 | Panel, Bonnet Rear | 1 |
| 33***60 | Panel, Soundproof | 1 |
| 33***82 | Panel, Soundproof | 1 |
B1-1-3 Chassis, (Tier Two Engine)
| 13***7D | Setscrew, M12 X 25 | 4 |
| 13***0D | Bolt, M6x40 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
B1-5-3 Cover,Engine, Spark Arrestor, (Tier One Engine)
| 12***55 | Handle | 1 |
| 12***87 | Handle, Locking | 1 |
| 13***3Z | Screw, M6x16 | 6 |
B1-4-1 Tank,Hydraulic
| 12***77 | Cover | 1 |
| 13***3Z | Screw, M6x16 | 6 |
| 13***5Z | Bolt | 8 |
B1-2-2 Bodywork, Fenders,Mirrors, & Brackets Etc
| 13***7Z | Bolt, M10x25 | 7 |
| 13***8Z | Bolt, M10 X 30 | 5 |
| 13***3Z | Nut, Lock, M10 | 3 |
B1-16-1 Triangle Carrier
| 12***01 | Strap | 1 |
| 29***00 | Carrier, Warning Triangle | 1 |
B1-8-5 Underside, Sound Panels
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 15 |
| 13***9Z | Screw, M10x35mm | 6 |
B1-4-3 Tank, Hydraulic
| 13***3Z | Screw, M6x16 | 6 |
| 13***5Z | Bolt | 10 |
| 13***0Z | Bolt, M12x40 | 4 |
B1-8-1 Bulkhead
| 13***3Z | Bolt, M10 X 16 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
B1-5-1 Cover, Engine
| 13***3Z | Screw, M6x16 | 6 |
| 13***3Z | Nut | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B1-9-6 Chaff Guards, Tier 2 Engines
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
B1-17-2 Rear Reflector Kit, German
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
| 14***1Z | Washer, 2 Ba | 4 |
B1-7-2 Hitch Recovery, Mechanical
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 13***5Z | Bolt, M20 X 65mm Long | 2 |
| 14***2Z | Washer, M20 | 4 |
B1-10-3 Soundproofing, Engine, (Tier One)
| 29***30 | Panel, Soundproof | 1 |
| 33***06 | Panel, Sound Proof | 1 |
| 33***76 | Panel, Bulkhead | 1 |
B1-3-1 Tank, Diesel Fuel, & Fittings
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
| 12***39 | Strainer, Fuel, Gauze | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
B1-10-4 Soundproofing, Engine
| 33***05 | Panel, Soundproof, Bulkhead Back | 1 |
| 33***07 | Panel, Soundproof, Bulkhead Rhs | 1 |
| 33***08 | Panel, Soundproof, Bulkhead Lhs | 1 |
B1-6-1 Engine Baffle
| 33***97 | Baffle, Engine Wa | 1 |
B1-12-1 Mirror, Tow Hitch
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B1-15-1 Mounting, Chock
| 12***01 | Strap | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***63 | Chock, Wheel, Chock, Wheel; Black Painted. New Zinc Plated Wheel Chocks Can Be Supplied With Zinc Plated Mounting., Chock, Wheel; See Note 1. May Be Used In Place Of Item 1 If Required, Chock, Wheel; Black Painted. New Zinc Plated Wheel Chocks Can Be Supplied With Zinc Plated Mounting | 1 |
B1-11-2 Soundproofing, Belly Plates, Installation (Tier Two Engine)
| 33***73 | Panel, Tank Lh Front | 1 |
| 33***74 | Panel, Sound Front Rh | 1 |
| 33***75 | Panel, Sound Front Lh | 1 |
B1-8-4 Bulkhead, Tier Two Engine
| 13***5D | Setscrew, M8x20 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***73 | Panel, Soundproofing | 1 |
B1-5-5 Cover,Engine
| 12***55 | Handle | 1 |
| 12***87 | Handle, Locking | 1 |
| 13***3Z | Screw, M6x16 | 6 |
B1-10-1 Soundproofing, Engine
| 29***92 | Panel, Soundproof | 1 |
| 29***03 | Panel, Soundproof | 1 |
| 29***04 | Panel, Soundproof | 1 |
B1-8-6 Underside, Sound Panels
| 13***5D | Setscrew, M8x20 | 4 |
| 13***5D | Setscrew, M10 X 20 | 14 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
B1-9-1 Guards, Propshafts
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 29***00 | Guard, Front Propshaft | 1 |
| 29***00 | Guard, Rear Propshaft | 1 |
B1-1-1 Chassis, (Tier One Engine)
| 13***7D | Setscrew, M12 X 25 | 4 |
| 13***0D | Bolt, M6x40 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
B1-10-6 Soundproofing,Engine, Spark Arrestor, (Tier One)
| 29***30 | Panel, Soundproof | 1 |
| 33***06 | Panel, Sound Proof | 1 |
| 33***76 | Panel, Bulkhead | 1 |
B1-9-7 Chaff Guard
| 14***3Z | Washer | 1 |
| 33***61 | Guard, Chaff Wa 525-50s | 1 |
| 82***95 | Fastener, Wingnut | 1 |
B1-6-5 Cooling Pack, Service Kit
| 24***12 | Grommet, Panel Hole Dia 29mm, Panel Thk 2.8-3.5mm | 1 |
| 33***49 | Plate, Spacer | 1 |
| 33***51 | Plate, Spacer | 1 |
B1-8-3 Bulkhead, Spark Arrestor
| 13***3Z | Bolt, M10 X 16 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
B1-6-2 Side Panel, Tier Two Engine
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 14***7D | Washer, M8 Plain | 3 |
B1-9-5 Chaff Guards, Tier 1 Engines
| 29***00 | Grille, Chaff Guard W.A. | 1 |
| 29***00 | Housing, Chaff Guard | 1 |
| 82***26 | Washer, Outside | 4 |
B1-8-2 Bulkhead
| 13***3Z | Bolt, M10 X 16 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
B1-17-1 Rear Reflector Kit
| 13***7Z | Bolt | 4 |
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
B1-4-2 Tank,Hydraulic, 3-Steer Mode
| 12***77 | Cover | 1 |
| 13***3Z | Screw, M6x16 | 6 |
| 13***5Z | Bolt | 8 |
B1-11-1 Soundproofing, Belly Plates, Installation (Tier One Engine)
| 33***72 | Panel, Sound Front | 1 |
| 33***73 | Panel, Tank Lh Front | 1 |
| 33***74 | Panel, Sound Front Rh | 1 |
B2-1-16 Low Canopy, Usa
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 29***33 | Bracket, Mounting | 1 |
B2-8-1 Suspension Unit, Seat
| 19***01 | Unit, Suspension | 1 |
| 19***02 | Kit-Weight Adjuster | 1 |
| 19***03 | Kit-Height Adjuster | 1 |
B2-7-1 Seat Belt
| 40***00 | Kit-Seat Belt, With Inertia Reel, 42" Long; Buckle Strap Length 190mm. There Are No Servicable Parts For This Item, Kit-Seat Belt, With Inertia Reel, 42" Long | 1 |
B2-1-30 Inclinometer, Lev-O-Gauge
| 70***00 | Gauge, Inclinometer/Level | 1 |
B2-1-14 Canopy French Build, Standard
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 21***07 | Pin, Tension | 1 |
B2-18-1 Visor, Sun
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
| 14***3Z | Washer | 4 |
| 14***01 | Screw, St | 8 |
B2-6-6 Seat, Optional, Low Cab
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***14 | Screw, Cap | 4 |
B2-1-17 Canopy Assy,Std,Usa
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 29***33 | Bracket, Mounting | 1 |
B2-9-5 Console, Sound Proofing
| 29***83 | Block, Foam | 1 |
| 33***62 | Panel, Sound Rh Front | 1 |
| 33***17 | Panel, Sound Front | 1 |
B2-1-15 Canopy French Build, Low Roof
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 21***07 | Pin, Tension | 1 |
B2-1-3 Low Cab Assembly
| 12***35 | Joint, Ball | 2 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B2-6-1 Seat, Suspension
| 13***5Z | Bolt | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***6Z | Washer, M6 | 4 |
B2-1-2 Canopy Assembly
| 13***3Z | Screw, M8 X 16 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 29***33 | Bracket, Mounting | 1 |
B2-15-1 Soundproofing, Cab
| 14***2Z | Screw | 4 |
| 29***79 | Panel, Soundproof | 1 |
| 29***80 | Panel, Soundproof | 1 |
B2-2-6 Glazing, Canopy, French
| 82***21 | Glass, Side Window | 1 |
| 82***29 | Glass, Side Window | 1 |
| 82***32 | Glass, Roof | 1 |
B2-11-2 Guard, Roof
| 13***5Z | Bolt | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 4 |
B2-9-1 Consoles
| 14***1D | Washer, 1/4" Medium | 4 |
| 29***83 | Gaiter | 1 |
| 29***84 | Gaiter | 1 |
B2-1-4 Low Canopy Assembly
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 29***33 | Bracket, Mounting | 1 |
B2-6-4 Seat, Suspension, Low Back
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-11-1 Guard, Windscreen
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B2-7-2 Seat Belt, 3"
| 12***52 | Spacer | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 2 |
| 13***3Z | Nut, Lock | 2 |
B2-6-5 Seat, Optional, Standard Cab
| 13***7Z | Screw, Hexagon M8 X 25 | 12 |
| 13***3Z | Nut, Self Lock, M8 | 8 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 12 |
B2-8-2 Seat Pedestal
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 29***00 | Pedestal, Seat | 1 |
B2-2-1 Cab Glazing, Standard
| 82***20 | Glass, Front Screen, (Laminated); Supereded To 82***11. See San 14089. | 1 |
| 82***21 | Glass, Side Window | 1 |
| 82***67 | Glass, Roof | 1 |
B2-19-1 Handbook Case
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***1Z | Washer | 4 |
B2-10-1 Mirror, External & Interior
| 12***00 | Mirror, With Bracket | 1 |
| 12***01 | Bracket | 1 |
| 99***00 | Mirror, Unbreakable, Exterior | 1 |
B2-6-2 Seat, Static
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-3-1 Door
| 12***05 | Bolt, Closing | 1 |
| 12***01 | Stud | 1 |
| 12***08 | Bush, Hinge | 2 |
B2-6-3 Seat, Static, Low Roof
| 13***11 | Capscrew | 4 |
| 40***00 | Seat, (Vinyl) | 1 |
| 40***00 | Seat, (Velour) | 1 |
B2-9-6 Console, Sound Proofing
| 29***83 | Block, Foam | 1 |
| 33***90 | Panel, Sound Rh Front | 1 |
| 33***12 | Panel, Sound Lhs Console | 1 |
B2-12-1 Cab Mountings
| 12***02 | Plate, Compression | 4 |
| 13***2Z | Bolt, M16 X 120 | 4 |
| 13***3Z | Nut, M16 | 4 |
B2-17-1 Floormats
| 27***53 | Strip, Kick | 1 |
| 29***09 | Floormat; San 23368.Ss To 33***00.Pi Th02/11a.19/2/7, P Gamble. | 1 |
| 29***21 | Mat, Side | 1 |
B2-15-2 Soundproofing Cab
| 14***2Z | Screw | 4 |
| 29***43 | Panel, Soundproofing | 1 |
| 29***00 | G.A., Cab Trim | 1 |
B2-1-1 Cab Assembly
| 12***35 | Joint, Ball | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B2-4-1 Cab Door Stay
| 29***01 | Stay, Window Ga | 1 |
| 33***10 | Latch, Bar | 1 |
| 33***11 | Latch, Snapsac | 2 |
B2-2-2 Cab Glazing, Low Cab
| 29***00 | G.A., Clear Glass, Short Cab | 1 |
| 29***00 | G.A., Green Glass Kit, Low Cab | 1 |
| 82***28 | Glass, Frnt Screen 852x752 | 1 |
B2-17-2 Floormats
| 27***53 | Strip, Kick | 1 |
| 29***21 | Mat, Side | 1 |
| 29***34 | Plug, Plastic, 90mm Diameter | 1 |
B3-2-1 Pads, Boom Wear
| 13***7Z | Bolt | 24 |
| 13***9Z | Screw, M10x35mm | 8 |
| 14***02 | Screw, Self Tap | 36 |
B3-3-1 Safety Strut
| 12***00 | Strap | 1 |
| 12***71 | Stop | 2 |
| 12***73 | Fastener, Anti-Luce | 1 |
B3-1-4 Booms
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***0D | Setscrew | 8 |
| 13***7D | Setscrew, M8x25 | 1 |
B3-1-1 Boom
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
B3-1-3 Boom, Pivot Pin Location
| 13***9Z | Bolt, M10x90mm | 3 |
| 13***0Z | Bolt, M10 X 100 | 14 |
| 13***3Z | Nut, Lock, M10 | 19 |
B3-3-5 Indicator, Boom Angle
| 14***4Z | Washer, Spring | 2 |
| 14***9Z | Washer | 1 |
| 15***00 | Plate, Back | 1 |
B3-1-2 Boom, Lever & Link
| 13***0Z | Bolt, M10 X 100 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
B5-5-1 Decals,Seat Belt, Warning
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
B5-4-1 Flip Charts (Usa)
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Clip, Hook | 2 |
B5-1-3 Labels, Uk Only
| 81***55 | Label, Diesel | 1 |
| 81***80 | Label, Drain Every 50 Hours | 2 |
| 81***92 | Label, Loader Arm, Scissor Point | 1 |
B5-3-1 Tool Kit
| 14***58 | Key | 1 |
| 27***00 | Bag, Tool | 1 |
| 33***92 | Gun, Grease | 1 |
B5-1-1 Labels
| 81***55 | Label, Diesel | 1 |
| 81***80 | Label, Drain Every 50 Hours | 2 |
| 81***92 | Label, Loader Arm, Scissor Point | 1 |
B5-2-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-1-2 Labels
| 81***01 | Label, No Passengers, German | 1 |
| 81***05 | Plate, Load Data, T.U.V | 1 |
| 81***60 | Label, Hi-Lite | 1 |
B5-1-5 Labels
| 81***55 | Label, Diesel | 1 |
| 81***80 | Label, Drain Every 50 Hours | 2 |
| 81***92 | Label, Loader Arm, Scissor Point | 1 |
B5-1-6 Labels
| 81***55 | Label, Diesel | 1 |
| 81***80 | Label, Drain Every 50 Hours | 2 |
| 81***92 | Label, Loader Arm, Scissor Point | 1 |
C Electrics-Machine, Cab & Engine
C1-10-1 Fusible Link Box, Assembly
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***30 | Fuse, 30 Amp | 2 |
| 71***40 | Fuse, 40 Amp | 1 |
C1-2-3 Light, Head, Right Hand Dip, White
| 13***1Z | Nut | 2 |
| 70***01 | Lens, Indicator | 1 |
| 70***00 | Light, Head Assembly, Right Hand Dip | 2 |
C1-15-1 Indicator, Safe Load
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw, No 8x1/2" | 2 |
| 70***00 | Unit, Sli Transducer; See Note 1. Adaptor Kit Available To Connect Previous Sliitems To Latest.Ie:71***00 & 72***86, Unit, Sli Transducer; See Note 1. Adaptor Kit Available To Connect Previous Sliitems To Latest.Ie:71***00 & 72***86., Unit, Sli Transducer; See Note 1. Adaptor Kit Available To Connect Previous Slito Latest Emc.Type Use 71***00 & 72***86, Unit, Sli Transducer | 1 |
C1-11-1 Light, Indicator, Side
| 13***1Z | Nut, 4ba Plain | 2 |
| 14***9Z | Washer | 2 |
| 70***00 | Flasher, Side, Repeater | 2 |
C1-7-3 Battery,Turbo
| 10***00 | Clamp | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-18-1 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Junior Timer Sealed, Socket Ho. Amp 2-Way | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
C1-2-4 Light, Head, Left Hand Dip
| 13***1Z | Nut | 2 |
| 70***00 | Light, Head Assembly, Left Hand Dip | 2 |
| 70***01 | Lens, Indicator | 1 |
C1-7-1 Battery, Standard
| 14***6Z | Washer, Spring | 2 |
| 29***88 | Clamp, Battery | 1 |
| 71***00 | Lead, Battery, +Ve | 1 |
C1-2-5 Light,Front, Driving Rh Dip, White With Side Repeat
| 13***1Z | Nut | 1 |
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
C1-2-1 Light, Head, Right Hand Dip
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Right Hand Dip | 1 |
C1-8-1 Alarm, Reverse
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 4 |
C1-9-1 Light, Number Plate
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 14***6Z | Washer, Spring | 2 |
C1-4-2 Light, Working
| 12***05 | Bracket | 2 |
| 13***07 | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
C1-19-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-15-2 Indicator,Safe Load
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
C1-13-1 Horn, Single Tone
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
C1-1-1 Harnesses
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut | 4 |
C1-3-1 Light, Rear
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***03 | Screw, Self Tapping | 2 |
C1-7-5 Earthing, Engine/Chassis
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
C1-12-1 Sensor,Steering, Front Axle, 3 Steer Mode
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
C1-6-2 Light,Beacon, Hazard Warning, Strobe
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C1-3-2 Light,Rear, Lh Dip
| 13***7Z | Bolt, M10x25 | 2 |
| 14***4Z | Washer | 2 |
| 14***5Z | Washer, Plain, 1/2" X 41mm Od | 2 |
C1-6-1 Light, Beacon, Hazard Warning, Amber
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***00 | Beacon, 12v, (155mm Tall) | 1 |
C1-5-1 Light, Reversing
| 13***1Z | Bolt, M10 X 10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
C1-4-1 Light, Working
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
C1-1-2 Harnesses
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut | 4 |
C1-20-1 Cable Insulation Kit
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 33***05 | Cable, Insulation | 1 |
C1-12-2 Sensor,Steering, Rear Axle, 3 Steer Mode
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
C1-9-2 Light, Number Plate, Italian Build
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 14***6Z | Washer, Spring | 2 |
C1-1-4 Harnesses
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut | 4 |
C1-1-3 Harnesses
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut | 4 |
C1-14-1 Inclinometer, Lev-O-Guage
| 70***00 | Gauge, Inclinometer/Level | 1 |
C1-7-2 Battery,Heavy Duty
| 14***6Z | Washer, Spring | 2 |
| 29***88 | Clamp, Battery | 1 |
| 71***00 | Lead, Battery, +Ve | 1 |
C1-3-3 Light Rear, Rh Dip
| 13***7Z | Bolt, M10x25 | 2 |
| 14***4Z | Washer | 2 |
| 14***5Z | Washer, Plain, 1/2" X 41mm Od | 2 |
C1-2-2 Light, Head, Left Hand Dip
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 1 |
C2-15-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***98 | Spacer | 1 |
| 02***53 | Lever, Alternator Adjusting | 1 |
C2-5-2 Motor, Starter, M127 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-13-1 Motor, Starter, 12volt, Re Build Only
| 02***03 | Stud | 3 |
| 02***59 | Nut | 3 |
| 71***31 | Motor, Starter - 12volt | 1 |
C2-1-3 Electrical Equipment, Tier 1 Emissions, Ak Build
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
| 17***04 | Nut | 1 |
C2-1-1 Electrical Equipment, Aa Build
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Temperature | 1 |
C2-1-2 Electrical Equipment, Tier 1 Emissions, Ar Build
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-4-3 Alternator Mountings
| 02***62 | Lever, Alternator Adjusting | 1 |
| 02***94 | Spacer | 1 |
| 02***17 | Bracket, Alternator Mounting | 1 |
C2-12-1 Circuit, Glow Plug, Re Build
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-5-1 Motor, Starter, M127 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-11-1 Electrical Equipment, Re Build, Tier 2 Emissions
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***89 | Switch, Water Temperature | 1 |
| 70***90 | Switch, Engine Oil Pressure | 1 |
C2-3-2 Alternator, Sealed, A127m-55amp 12.Volt, Optional
| 70***00 | Tape, Self-Amalgamating | 0 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***00 | Alternator, 12volt-55amp Sealed | 1 |
C2-5-3 Motor, Starter, M127 12.Volt, Ar/Ak Build Only
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-14-1 Alternator, 12volt - 65amp
| 71***52 | Alternator, 65a-12v | 1 |
C2-4-2 Alternator Mountings
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-3-1 Alternator, A127-65amp 12.Volt
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***05 | Rectifier | 1 |
C2-3-3 Alternator, 65amp 12.Volt
| 71***52 | Alternator, 65a-12v | 1 |
C3-21-1 Air-Con Compressor
| 02***59 | Belt, Drive | 1 |
| 33***77 | Bracket, Compressor | 1 |
| 33***79 | Cam, Eccentric Bracket | 1 |
C3-3-1 Fuse Box & Relays
| 13***8Z | Screw, Cap | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 26***02 | Spacer | 2 |
C3-12-1 Face Level Fan, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C3-7-4 Switch, Column, Non-Lighting
| 13***0Z | Bolt, M12x40 | 1 |
| 14***9Z | Washer | 2 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 1 |
C3-6-5 Heater
| 30***00 | Screw | 27 |
| 30***05 | Arm, Control | 1 |
| 30***06 | Washer, Shoulder 6.2 I/D | 2 |
C3-23-1 Air-Con, Reciever Drier
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 14***6Z | Washer, M6 | 10 |
C3-7-2 Switch,Column, Non-Lighting
| 13***0Z | Bolt, M12x40 | 1 |
| 14***9Z | Washer | 2 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 1 |
C3-27-1 Heater, Decals
| 33***73 | Plate, Decal | 1 |
| 33***07 | Decal, Temperature | 1 |
| 92***00 | Tape, Double Sided | 1 |
C3-10-1 Radio Installation
| 14***02 | Screw, No.10 X 1/2" Long | 6 |
| 29***36 | Housing, Speaker | 1 |
| 29***43 | Housing, Speaker | 1 |
C3-8-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-2-10 Parkbrake, Rocker Switch Type
| 29***56 | Plate, Switch | 1 |
| 33***84 | Plate, Switch | 1 |
| 70***60 | Insert, Park Brake | 1 |
C3-22-1 Air-Con Condenser
| 15***81 | 11" Fan & Motor | 1 |
| 30***20 | Condenser, Air-Con | 1 |
| 33***80 | Box, Condenser | 1 |
C3-2-11 Parkbrake, Push Button Type
| 33***62 | Plate, Parkbrake Switch, Pushbutton Type | 1 |
| 33***89 | Plate, Switch, Push Button P/Brake | 1 |
| 70***39 | Switch, Parkbrake | 1 |
C3-24-1 Air-Con Evaporator
| 13***8Z | Screw, M8x30 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 30***04 | Blower, Motor | 1 |
C3-5-10 Wash/Wipe, Roof Screen
| 14***02 | Screw | 1 |
| 70***53 | Insert, Wash/Wipe | 1 |
| 70***00 | Switch | 1 |
C3-2-15 3-Mode Steer, Switch & Harness
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***9Z | Washer | 2 |
C3-25-2 Air-Con,Air Intake, Pre-Cleaner Assy
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-23-2 Air-Con, Reciever Drier
| 30***93 | Drier, Receiver | 1 |
C3-25-1 Air-Con, Air Intake, Pre-Cleaner Assy
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-26-1 Air-Con Hoses
| 64***10 | Hose, Evaporator Box Kit | 1 |
| 64***11 | Hose, Evaporator/M.O.I | 1 |
| 64***12 | Hose, Condenser/Reciever | 1 |
C3-2-2 Switches,Electrical
| 70***53 | Indicator, Illuminated 4ws/1st, Trailer | 1 |
| 70***60 | Insert, Park Brake | 1 |
| 70***00 | Switch, Blank | 1 |
C3-22-2 Air-Con Condenser
| 30***20 | Condenser, Air-Con | 1 |
| 30***60 | Fan, Condenser & Motor | 1 |
| 30***52 | Pipe, Set; San 21512. | 1 |
C3-4-2 Wash/Wipe, Windscreen
| 13***3D | Screw, M5x16 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
| 14***5D | Washer | 2 |
C3-7-1 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 2 |
C3-20-1 Air Conditioning Kit
C3-2-1 Switches, Electrical
| 70***31 | Decal, Front Working Lights | 1 |
| 70***35 | Decal, Rear Fog Light | 1 |
| 70***37 | Decal, Beacon | 1 |
C3-1-1 Instrument Cluster
| 14***1Z | Washer | 2 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C3-4-1 Wash/Wipe, Windscreen
| 13***3D | Screw, M5x16 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
| 14***5D | Washer | 2 |
C3-20-2 Air Conditioning Kit
C3-24-2 Air-Con Evaporator
| 30***80 | Evaporator Box C_w L | 1 |
| 30***39 | Coil, Evaporator | 1 |
| 99***10 | Thermostat, Switch | 1 |
C3-5-1 Wash/Wipe, Rear Screen
| 25***03 | Jet, Screen Washer | 1 |
| 64***25 | Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 3000mm, Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 2500mm, Tube, 5 Metres Long, Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1200mm (600mm Per Pump To Valve), Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1400mm (700mm Per Pump To Valve), Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 5000mm, Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 4000mm | 0 |
| 70***00 | Switch | 1 |
C3-21-2 Air-Con Compressor
| 30***55 | Air-Con Compressor | 1 |
| 30***56 | Kit, Compressor Bolts | 1 |
| 30***57 | Belt, Drive | 1 |
C3-6-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***9Z | Screw, M10x35mm | 4 |
C3-26-2 Air-Con Hoses
| 30***81 | Hose | 1 |
| 92***54 | Hose, Assembly, No.8 | 1 |
| 92***55 | Hose, Assembly, No.10; 57007/51423bl/51323bl134asv | 1 |
D Controls-Machine, Engine & Steering
D1-5-4 Control,Gear Change
| 11***16 | Joint, Universal | 1 |
| 13***4Z | Bolt | 1 |
| 13***1D | Nut | 1 |
D1-1-1 Controls, Loader
| 13***9Z | Screw, M10x35mm | 3 |
| 13***0Z | Bolt, M10 X 40 | 3 |
| 13***2Z | Nut, M8 | 4 |
D1-5-2 Control,Gear Change
| 11***16 | Joint, Universal | 1 |
| 13***4Z | Bolt | 1 |
| 13***2Z | Nut | 1 |
D1-1-2 Controls, Loader, Twin Aux
| 13***9Z | Screw, M10x35mm | 3 |
| 13***0Z | Bolt, M10 X 40 | 3 |
| 13***2Z | Nut, M8 | 3 |
D1-3-2 Control Knob, Gear Change
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
| 12***17 | Top, Control Knob | 1 |
D1-3-1 Control, Knob, Gear Change
| 16***16 | Knob, 'Screw On' | 1 |
| 70***00 | Push Button Black, With Microswitch | 1 |
| 70***00 | Switch, Micro | 1 |
D1-5-1 Control, Gear Change
| 11***16 | Joint, Universal | 1 |
| 13***4Z | Bolt | 1 |
| 13***2Z | Nut | 1 |
D1-5-3 C0ntrol,Gear Change
| 11***16 | Joint, Universal | 1 |
| 13***4Z | Bolt | 1 |
| 13***1D | Nut | 1 |
D1-2-1 Lever Lock, Loader Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
D2-1-1 Controls, Throttle
| 12***63 | Bracket, Throttle Reaction | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
D2-1-2 Controls, Throttle, Tier 1 Emissions, Ar Build
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 3 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
D2-1-3 Controls,Throttle, (Tier Two Engine)
| 13***0D | Setscrew | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***0Z | Bolt, M8x40 | 1 |
D2-2-1 Controls,Throttle, Tier 2 Emissions, Re Build
| 13***0D | Setscrew | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***0Z | Bolt, M8x40 | 1 |
D3-1-1 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***00 | Wheel, Steering | 1 |
D3-1-2 Steering Column
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***2D | Nut, Thin 5/8 In Unf | 1 |
E Hydraulics & Air Including, Steering
E1-6-3 Cooler,Oil, Hydraulic
| 30***99 | Cooler, Hydraulic Oil | 1 |
| 61***00 | Hose | 1 |
| 61***00 | Hose | 1 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-8-3 Circuit, Steering
| 16***50 | Adaptor | 1 |
| 16***53 | Adaptor; O Ring 24***06 | 4 |
| 29***00 | G.A., Steer Circuit | 1 |
E1-2-1 Circuit, Displacement & Tilt
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
| 29***00 | Pipe, Assembly | 1 |
E1-8-2 Circuit,Steering, 3-Mode Steer
| 13***2Z | Nut | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 2 |
E1-6-2 Cooler, Oil, Hydraulic
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
E1-1-5 Circuit,Neutral, (Tier Two Engine)
| 14***90 | Hose, Suction | 1 |
| 22***12 | Clip, Jubilee | 2 |
| 29***00 | G.A., Neutral Circuit | 1 |
E1-3-1 Circuit, Lift
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 1 |
| 14***7Z | Washer, Spring | 1 |
| 29***00 | Pipe, Feed, Lift Ram | 1 |
E1-4-1 Circuit, Extension Ram
| 29***00 | G.A., Boom Hydraulics | 1 |
| 61***00 | Hose | 1 |
| 61***00 | Hose, 1/2in, 2440 Long | 1 |
E1-6-1 Cooler, Oil, Hydraulic
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
E1-8-1 Circuit, Steering
| 13***2Z | Nut | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***4Z | Washer, Star | 2 |
E1-3-2 Circuit,Lift, (Twin Aux)
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 1 |
| 14***7Z | Washer, Spring | 1 |
| 29***00 | Pipe, Feed, Lift Ram | 1 |
E1-1-1 Circuit, Neutral, (Tier One Engine)
| 14***90 | Hose, Suction | 1 |
| 22***12 | Clip, Jubilee | 2 |
| 29***00 | G.A., Neutral Circuit | 1 |
E1-7-5 Circuit,Transmission, Cooling
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 12***81 | Adapter; Replaced By 12***06, See San10199 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
E1-7-3 Circuit, Transmission, Cooling
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 12***81 | Adapter; Replaced By 12***06, See San10199 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
E1-5-6 Circuit,(Twin Aux), 2nd Auxiliary, Loader Arm
| 33***74 | Guide, Hose | 2 |
| 33***75 | Guide, Hose | 1 |
| 33***65 | Pipe, Assembly Twin Auxiliary Wa | 1 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-2-2 Circuit, Displacement & Tilt, (Twin Aux)
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
| 33***74 | Guide, Hose | 1 |
E1-7-4 Circuit, Transmission, Cooling
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 12***81 | Adapter; Replaced By 12***06, See San10199 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
E1-5-1 Circuit, Auxiliary, Loader Arm
| 29***00 | Pipe, Assembly | 1 |
| 29***00 | G.A., Boom Hydraulics | 1 |
| 29***00 | Pipe, Assembly | 1 |
E1-5-2 Circuit.(Twin Aux), Ist Auxiliary
| 29***00 | G.A., Boom Hydraulics | 1 |
| 33***45 | Pipe, Auxiliary 1st Feed Wa | 1 |
| 33***85 | Pipe, Feed Wa, Auxiliary 1 | 1 |
E1-4-2 Circuit, Extension Ram, (Twin Aux)
| 29***00 | G.A., Boom Hydraulics | 1 |
| 61***00 | Hose | 1 |
| 61***00 | Hose, 1/2in, 2440 Long | 1 |
E1-7-1 Circuit, Transmission, Cooling
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***17 | Adapter, 5/8" X 1/2" M/M | 2 |
E1-15-1 Circuit, Industrial Grapple
| 14***11 | Seal, Bonded | 6 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 6 |
| 16***03 | Adapter, Male/Male | 6 |
E2-4-1 Pump, Fan Drive
| 02***33 | Gasket | 1 |
| 20***50 | Pump, Fan Drive | 1 |
| 20***52 | Kit-Seal | 1 |
E2-1-1 Pump, Main Hydraulic, Installation, (Tier One Engine)
| 02***35 | Gasket | 1 |
| 13***7Z | Capscrew, M8x25mm | 4 |
| 13***6Z | Capscrew, M8 X 70mm Long | 1 |
E2-2-1 Pump, Main Hydraulic
| 20***01 | Kit-Seal, Pump | 1 |
| 20***03 | Kit, Pressure Plates, (2 Off) | 1 |
| 20***00 | Pump, Hydraulic | 1 |
E2-3-1 Motor, Fan Drive
| 20***17 | Washer, Tab | 1 |
| 20***00 | Motor, Hydraulic; Superseded By 20/92***03 Ref James Coleman, E.Mail To Paul Guest,21/3/08 San.25671 Refers | 1 |
| 20***01 | Valve Relief | 1 |
E2-1-5 Pump, Main Hydraulic, Installation, (Tier Two Engine)
| 02***37 | Gasket | 1 |
| 13***4D | Bolt | 1 |
| 13***7Z | Capscrew, M8x25mm | 4 |
E3-6-1 Valve, Diverter
| 25***00 | Valve, Diverter, 12 Volt; Superceded 25/97***00 See Ti 5/080 | 1 |
E3-8-1 Valve, 3 Steer Mode
| 12***21 | Block | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 8 |
| 13***20 | Capscrew | 2 |
E3-7-1 Filter, Hydraulic
| 12***00 | Filter, Hydraulic Assembly, 5 Micron; Replaced By 27***00, See San07947 | 1 |
| 24***24 | O Ring | 1 |
| 32***00 | Element, Hydraulic; Replaced By 32/91***00, See San07902 | 1 |
E3-3-3 Valve Components, (Twin Aux)
| 25***11 | Valve, Section | 1 |
| 25***27 | Plate, Seal Retainer | 2 |
| 25***08 | Kit-Repair, Check Valve | 1 |
E3-1-2 Valve, Loader, (Without Detent)
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-1-7 Valve, Loader, (Without Detent)
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-1-8 Valve, Loader, Twin Aux, (Without Detent)
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-3-1 Valve, Components
| 25***11 | Valve, Section | 1 |
| 25***27 | Plate, Seal Retainer | 2 |
| 25***08 | Kit-Repair, Check Valve | 1 |
E3-5-2 Valve, Brake Charge
| 13***2Z | Bolt, M12 X 120 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E3-1-9 Valve, Loader, (With Detent), Twin Aux
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-4-1 Valve, Steering
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***02 | Adapter | 1 |
E3-2-3 Valve, Assembly, Twin Aux, (Without Detent)
| 25***32 | Valve, 5 Spool | 1 |
| 25***76 | Tie Rod Kit, 5 Spool | 3 |
| 25***09 | Washer | 2 |
E3-7-2 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 32***41 | Element, Hydraulic Filter, 5 Micron, 254mm Long | 1 |
| 32***46 | Element, Hydraulic Filter, 12 Micron,229mm Long | 1 |
E3-1-1 Valve, Loader, (With Detent)
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-20-1 Lubrication, & Filters
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 32***01 | Element, Fuel Filter, Canister Type | 1 |
| 32***00 | Element, Hydraulic Filter, 10 Micron; San 22618.Cwe To 32/92***46.Ref Pi A01/187, P Guest/M Mcarthy. P Gamble 20/09***06 | 1 |
E3-2-4 Valve Assembly, (Twin Aux), With Detent
| 25***76 | Tie Rod Kit, 5 Spool | 3 |
| 25***02 | Valve, 5 Spool(With Detent) | 1 |
| 25***09 | Washer | 2 |
E3-1-6 Valve, Loader, (With Detent)
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-5-1 Valve, Brake Charge
| 13***2Z | Bolt, M12 X 120 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E3-1-4 Valve,Loader, (With Detent), Twin Aux
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-1-3 Valve,Loader, Twin Aux, (Without Detent)
| 13***3Z | Bolt, M10 X 55 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-2-2 Valve, Assembly, (Without Detent)
| 25***35 | Valve, 4 Spool | 1 |
| 25***09 | Washer | 1 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 5 |
E3-2-1 Valve, Assembly, (With Detent)
| 25***09 | Washer | 2 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 5 |
| 25***06 | Nut | 2 |
E4-12-2 Ram, Tow Hitch
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
E4-6-2 Ram, Quickhitch
| 13***3Z | Nut, M20 | 1 |
| 24***02 | Seal, Gland | 1 |
| 24***27 | Seal | 1 |
E4-2-3 Ram, Extension
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***08 | O Ring | 1 |
| 23***55 | O Ring | 1 |
E4-10-1 Ram, Log Grab, Manure Silage Fork, Fixed & Sliding Bale Grab
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-7-1 Ram, 3 Mode Steer &, Compensation
| 13***3Z | Nut, M12 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 24***29 | Seal, Piston Head | 1 |
E4-1-1 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 25***00 | Cartridge, Counter Balance | 1 |
| 25***02 | Kit-Seal | 1 |
E4-12-3 Ram, Tow Hitch
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
E4-5-1 Ram, Steering, Front & Rear
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***07 | Ram, Steer, Complete; Replaced By 99***82, See San 13446 | 2 |
| 55***07 | Cylinder; Superseded By 55***39 By Ge (See Pi C02/102 | 1 |
E4-4-3 Ram,Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***08 | O Ring | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
E4-5-2 Ram,Steering, Front & Rear
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 24***29 | Seal, Piston Head | 1 |
| 24***16 | Ring, Wear | 2 |
E4-10-2 Ram,Multi-Fork
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-4-2 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***08 | O Ring | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
E4-4-4 Ram,Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***08 | O Ring | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
E4-4-1 Ram, Tilt
| 14***07 | Nipple, Grease | 1 |
| 80***27 | Bearing, Liner, 50mm Pivot Bore | 2 |
| 81***26 | Seal, Pivot Pin Grease, 60 X 50 X 5; Replaces 90***43 | 2 |
E4-12-1 Ram, Tow Hitch
| 16***62 | Ram, Hydraulic Tow Hitch; See San 12977. Superseded To 55***18. | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-2-2 Ram.Extension
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***08 | O Ring | 1 |
| 23***55 | O Ring | 1 |
E4-3-3 Ram, Displacement, Or Compensator
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
| 24***31 | Seal, Piston, 70 X 6.0 | 1 |
| 24***12 | Ring, Wear, 70 X 6.8 | 2 |
E4-6-1 Ram, Quickhitch
| 13***3Z | Nut, M20 | 1 |
| 24***02 | Seal, Gland | 1 |
| 24***27 | Seal | 1 |
E4-3-1 Ram, Displacement
| 59***17 | Cap, End; Replaced By 59***47, (Or Use 59***20 + 24***04.) | 1 |
| 59***27 | Head, Piston | 1 |
| 80***17 | Bush, Bronze | 1 |
E4-2-1 Ram, Extension
| 90***08 | Cartridge | 1 |
| 90***00 | Ram, Extension, Ram, Extension; See Note 1. 90***00 Is Interchangeable With 55***02 As A G.A. Only | 1 |
E4-1-2 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 24***39 | Seal, Piston | 1 |
| 24***20 | Ring, Wear | 2 |
E4-3-2 Ram,Displacment, Or Compensator
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
| 55***03 | Ram, Compensator; See Note 1. 55***03 Interchangeable With 90***00 As Aassy Only, Ram, Compensator | 1 |
| 55***03 | Cylinder, W.A. | 1 |
F Axles, Wheels & Transmission
F1-3-1 Knuckle, Steering, Front
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F1-3-5 Knuckle,Steering, Front, 448/56390,448/57000,57640
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 14 |
| 44***02 | Pin, Hexagon Head | 6 |
F1-5-2 Differential Assy, 16.2 Lsd
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
F1-5-5 Differential Assy, 16.2 Ratio, 448/56390 Axle
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F1-7-2 Shaft Drive,French
| 91***07 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***01 | Shaft, Diff Side | 1 |
F1-5-3 Differential Assy, 19.2, French
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-1-5 Axle Assembly, 16.2 Std Ratio, 448/56390,57000,57640
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-6-3 Differential, Components,Lsd, 448/56550 Differential
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F1-5-1 Differential Assy, 16.2 Axles
| 13***15 | Bolt, M8 X 65mm Long | 1 |
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
F1-7-3 Shaft,Drive
| 91***07 | Kit-Spider | 4 |
| 91***01 | Shaft, Hub Drive; Use 91***01 - Duplicate Part, San 03709 | 1 |
| 91***03 | Circlip | 8 |
F1-5-4 Differential Assy, 19.2 Lsd, French
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 9-32 Teeth; Replaced By 45***29, See San 10680 | 1 |
| 44***00 | Casing, Outer | 1 |
F1-8-1 Remote Greasing
| 13***1Z | Nut | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-7-1 Shaft, Drive
| 91***07 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***01 | Shaft | 1 |
F1-5-6 Differential Assy, 16.2 Ratio, Lsd, 448/56400 Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
| 44***50 | Differential, Complete | 1 |
F1-3-4 Knuckle,Steering, Front,French, 448/56510
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F1-1-1 Axle Assembly Front, 16.2 Ratio
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F1-4-2 Hub & Components, 16.2 : 1 Axle Ratio, 3 Steer Mode
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F1-3-3 Knuckle, Steering, Front, French
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F1-4-3 Hub & Components, 19.2 Axle Ratio, French
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F1-3-2 Knuckle,Steering, Front,Ratio 16.2, 448/56500 & 448/56400
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 14 |
| 44***02 | Pin, Hexagon Head | 6 |
F1-1-2 Axle Assembly Front, 16.2 Ratio Lsd
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F1-4-1 Hub & Components, 16.2 Axle Ratio
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F1-7-4 Shaft,Drive, French
| 91***07 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***01 | Shaft | 1 |
F1-6-2 Differential, Components, Lsd
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Limited Slip | 1 |
| 44***01 | Housing, Differential | 1 |
F1-4-4 Hub & Components, 19.2 Axle Ratio, 3 Steer Mode
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F1-1-8 Axle Assembly Front, 19.2 Ratio Lsd, French,448/56520
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F1-7-5 Shaft,Drive, 448/56390,57000,57640
| 33***80 | Shaft, Drive, Diff. Side | 1 |
| 33***30 | Shaft, Drive, Diff. Side | 1 |
| 91***07 | Kit-Spider | 4 |
F1-20-1 Spacer, For Sd55 Axles
| 92***00 | Spacer; Was 44***02 Collasable Spacer. Can Be Used In Place Of Collapsable Spacer On Rtfl Axle Builds., Spacer, Spacer; Was 44***02. Solid Spacer Can Be Used Place Of Collapsable Spacer On Rtfl Builds | 1 |
| 92***01 | Spacer, T=13.650 | 1 |
| 92***02 | Spacer, T=13.675 | 1 |
F1-1-4 Axle Assembly Front, 19.2 Ratio Lsd, French
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F1-5-7 Differential Assy, 19.2 Lsd, French, 448/5610 Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 9-32 Teeth; Replaced By 45***29, See San 10680 | 0 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
F1-1-3 Axle Assembly,Front, 19.2 Ratio,French
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F1-1-6 Axle Assembly, 16.2 Ratio, 448/56410,57020,57660
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-1-7 Axle Assy,Front, 19.2 Ratio,French, 448/56510,57600
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F1-5-8 Differential Assy, 19.2.Lsd,French, 448/56520 Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 9-32 Teeth; Replaced By 45***29, See San 10680 | 1 |
| 44***00 | Casing, Outer | 1 |
F2-3-1 Knuckle, Steering, Rear
| 13***5Z | Bolt | 1 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F2-3-3 Knuckle Steering, Rear, French
| 13***5Z | Bolt | 1 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F2-4-2 Hub & Components, 16.2 Axle Ratio, 3 Steer Mode
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F2-8-2 Remote Greasing, Alternative Method
| 14***01 | Washer, Aluminium | 1 |
| 20***04 | Adaptor, Grease | 1 |
| 64***00 | Hose | 1 |
F2-4-3 Hub & Components, 19.2 Axle Ratio, French
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F2-4-4 Hub & Components, 19.2 Axle Ratio, French, 3 Steer Mode
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F2-5-8 Differential Assy, 19.2 Lsd, 448/56540 Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 9-32 Teeth; Replaced By 45***29, See San 10680 | 1 |
| 44***00 | Casing, Outer | 1 |
F2-6-3 Differential, Components, Lsd, 448/56550 Differential
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F2-5-3 Differential Assy, 19.2 Axles,French
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-7-2 Shaft,Drive,French
| 91***07 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***01 | Shaft | 1 |
F2-1-5 Axle Assembly, 16.2 Ratio
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-3-4 Knuckle Steering, Rear, French, 448/56530,448/56540
| 13***5Z | Bolt | 1 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F2-4-1 Hub & Components, 16.2 Axle Ratio
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 22***45 | Circlip | 1 |
F2-7-3 Shaft,Drive, 448/57710
| 91***07 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***01 | Shaft, Diff Side | 1 |
F2-1-3 Axle Assembly,French, 19.2 Ratio, 448/56330
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-1-2 Axle Assembly, 16.2 Ratio, Lsd, 448/53600
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-5-5 Differential Assy, 16.2 Ratio, 448/56500 Axle
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F2-6-2 Differential, Components, Lsd
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Limited Slip | 1 |
| 44***01 | Housing, Differential | 1 |
F2-7-4 Shaft,Drive, French
| 33***80 | Shaft, Drive, Diff. Side | 1 |
| 33***30 | Shaft, Drive, Diff. Side | 1 |
| 91***07 | Kit-Spider | 4 |
F2-5-6 Differential Assy, 16.2 Lsd, 448/56410 Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
| 44***50 | Differential, Complete | 1 |
F2-7-1 Shaft, Drive
| 91***07 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***01 | Shaft, Diff Side | 1 |
F2-5-4 Differential Assy, 19.2 Ratio, Lsd, French
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Differential, Limited Slip | 1 |
| 44***00 | Casing, Outer | 1 |
F2-1-7 Axle Assembly,French, 19.2 Ratio
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-3-2 Knuckle, Steering Rear, 448/56500,448/57710
| 13***5Z | Bolt | 1 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F2-8-1 Remote Greasing
| 13***1Z | Nut | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-1-8 Axle Assembly, 19.2 Ratio,Lsd
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-1-4 Axle Assembly,French, 19.2 Ratio, Lsd, 448/56340
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-5-1 Differential Assy, 16.2 Ratio
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-1-1 Axle Assembly, 16.2 Ratio, 448/53400
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-5-2 Differential Assy, 16.2 Ratio, Lsd
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
F2-1-6 Axle Assembly, 16.2 Ratio, Lsd
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
F2-5-7 Differential Assy, 19.2 Axle, French, 448/56530 Axle
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F3-1-1 Propshafts, Transmission,Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-3-1 Wheels & Tyres
| 10***01 | Nut | 16 |
| 14***37 | Stop | 1 |
| 14***00 | Wheel, Assembly,Continental, 12.5/80x18x10pr; Superseded By 33***17 - San 11345, Traction. Not Suitable For North American 210sl Machine, Wheel, Assembly,Continental, 12.5/80x18x10pr; Superseded By 33***17 - San 11345 | 1 |
F3-1-20 Drive Shaft, Universal, Joints (Spider Kits)
| 91***02 | Kit-Spider | 1 |
| 91***03 | Kit-Spider, 82mm Over Caps, 27mm Dia. | 1 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 1 |
F3-1-3 Propshafts, Transmission,Front
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F5-1-4 Transmission, Jcb Syncro Shuttle, 20kph, German
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-5-3 Transmission, Jcb Synchro Shuttle, Gear Change
| 13***7Z | Bolt, Coated | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***22 | Lever, Gear Shift | 1 |
F5-2-4 Transmission, Jcb Syncro Shuttle, Output Gear Components
| 44***00 | Yoke | 1 |
| 44***03 | Yoke, Coupling | 1 |
| 44***25 | Spacer | 1 |
F5-4-5 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 8 |
| 44***09 | Washer, Thrust | 2 |
F5-7-1 Torque Converter, (Tier One Engine)
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F5-1-7 Transmission, Jcb Syncro Shuttle, 20kph
| 13***9Z | Screw, M10x35mm | 31 |
| 13***4Z | Bolt, M10x60 | 4 |
| 13***8Z | Bolt, M10x80 | 2 |
F5-1-2 Transmission, Jcb Syncro Shuttle, 20kph, German
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
F5-1-1 Transmission, Jcb Syncro Shuttle, 20kph
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 4 |
F5-7-2 Torque Converter, (Tier Two Engine)
| 02***70 | Dowel | 2 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***03 | Bolt | 6 |
F5-1-3 Transmission, Jcb Syncro Shuttle, 30kph
| 13***7Z | Bolt, M10x25 | 5 |
| 13***4Z | Bolt, M10x60 | 4 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 4 |
F5-1-10 Transmission, Jcb Synchro Shuttle
| 13***9Z | Screw, M10x35mm | 31 |
| 13***4Z | Bolt, M10x60 | 4 |
| 13***8Z | Bolt, M10x80 | 2 |
F5-2-5 Transmi9ssion, Jcb Synchro Shuttle, Output Gear Components
| 44***00 | Yoke | 1 |
| 44***03 | Yoke, Coupling | 1 |
| 44***25 | Spacer | 1 |
F5-4-4 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 8 |
| 44***09 | Washer, Thrust | 2 |
F5-1-13 Transmission, Jcb Syncro Shuttle, 20kph
| 13***9Z | Screw, M10x35mm | 31 |
| 13***4Z | Bolt, M10x60 | 4 |
| 13***8Z | Bolt, M10x80 | 2 |
F5-1-8 Transmission, Jcb Syncro Shuttle, 30kph, High Speed
| 13***9Z | Screw, M10x35mm | 31 |
| 13***4Z | Bolt, M10x60 | 4 |
| 13***8Z | Bolt, M10x80 | 2 |
F5-3-1 Transmission, Jcb Syncro Shuttle, Components, 30kph
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-1-12 Transmissio, Jcb Syncro Shuttle, 30kph, High Speed
| 13***9Z | Screw, M10x35mm | 31 |
| 13***4Z | Bolt, M10x60 | 4 |
| 13***8Z | Bolt, M10x80 | 2 |
F5-4-1 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 8 |
| 44***09 | Washer, Thrust | 2 |
F5-3-4 Transmission, Jcb Syncro Shuttle, Components
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-5-2 Transmission, Jcb Syncro Shuttle, Gear Change
| 13***7Z | Bolt, Coated | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***22 | Lever, Gear Shift | 1 |
F5-6-1 Transmission, Mounting
| 11***01 | Mounting, Metalastik | 2 |
| 12***53 | Washer, Rebound | 2 |
| 13***8Z | Bolt, M12 X 80mm | 2 |
F5-6-2 Transmission, Mounting
| 11***01 | Mounting, Metalastik | 2 |
| 12***53 | Washer, Rebound | 2 |
| 13***8Z | Bolt, M12 X 80mm | 2 |
F5-2-1 Transmission, Jcb Syncro Shuttle, Output Gear Components
| 44***00 | Yoke | 1 |
| 44***03 | Yoke, Coupling | 1 |
| 44***25 | Spacer | 1 |
F5-5-1 Transmission, Jcb Syncro Shuttle, Gear Change
| 13***7Z | Bolt, Coated | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***22 | Lever, Gear Shift | 1 |
G Brakes
G1-5-3 Brakes, Trailer, Hydraulic
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Bolt, M10 X 10 | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
G1-3-2 Brake System, Charge Circuit
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***86 | Block, Adapter | 1 |
G1-5-1 Brakes, Trailer, Hydraulic
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Bolt, M10 X 10 | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
G1-4-2 Control Pedal, Brake
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Bolt, M10 X 35 | 3 |
G1-5-2 Brakes, Trailer, Hydraulic
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt, M10 X 10 | 2 |
G1-3-1 Brake System, Charge Circuit
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***86 | Block, Adapter | 1 |
G1-14-1 Brake Valve, Trailer
| 25***00 | Valve, Throttle Trailer, Brake | 1 |
| 25***00 | Valve, Brake | 1 |
| 25***01 | Kit-Seal | 1 |
G1-2-1 Brake, Axle, Front
| 22***45 | Circlip | 2 |
| 44***02 | Pin, Hexagon Head | 6 |
| 44***03 | Piston, Brake | 2 |
G1-4-1 Control Pedal, Brake
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Bolt, M10 X 35 | 3 |
| 13***2Z | Nut | 1 |
G1-1-1 Brake, System
| 14***06 | Spacer | 4 |
| 15***00 | Adapter, 'T' | 2 |
| 15***00 | Nut | 7 |
G1-2-2 Brake, Axle, Rear
| 22***45 | Circlip | 2 |
| 44***03 | Piston, Brake | 2 |
| 45***24 | Plate, Brake Friction; See Ti Gen127 | 4 |
G1-5-4 Brakes, Trailer, Hydraulic
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Bolt, M10 X 10 | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
G1-14-2 Brake Valve, Trailer
| 25***00 | Valve, Throttle Trailer, Brake | 1 |
| 25***02 | Kit-Seal | 1 |
| 25***01 | Kit-Repair | 1 |
N Engine 1004-4
N1-5-3 Fans, Pulleys, & Fan Belt, Aa Build
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***66 | Belt, Fan, Pair, L=1312mm; Ld Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 99***00., Belt, Fan, Pair, L=1312mm | 1 |
N1-3-2 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete, 1004-4, Nat/Aspirated, 71bhp | 1 |
N1-6-1 Timing Case, Camshaft & Gears, Aa Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***09 | Plug, Taper, Threaded; Tu Build Only. Included In Item 1, Plug, Taper, Threaded | 1 |
N1-3-1 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
N1-5-4 Fans, Pulleys, & Fan Belt, Aa Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
N1-5-5 Fans, Pulleys, & Fan Belt, Aa Build, Hot Climate
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
N1-5-1 Fans, Pulleys, & Fan Belt, Aa Build
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 3 |
| 02***66 | Belt, Fan, Pair, L=1312mm; Ld Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 99***00., Belt, Fan, Pair, L=1312mm | 1 |
N1-7-1 Flywheel & Housing, Aa Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
N2-3-1 Rocker Cover, Aa Build
| 02***90 | Spring | 1 |
| 02***69 | Bush | 1 |
| 02***58 | Hose, Oil Breather | 1 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-4-1 Lifting Plates, Engine, Aa Build
| 02***13 | Plate, Lifting | 1 |
| 02***31 | Plate, Lifting | 1 |
| 02***71 | Bolt | 4 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N3-3-1 Filter, Air, Aa Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Spring | 4 |
| 22***14 | Clip, Jubilee; Replaces Kej0337 | 4 |
N3-4-1 Exhaust System
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***03 | Stud | 7 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa Build
| 02***95 | Plug, Taper | 1 |
| 02***92 | Thermostat | 1 |
| 02***46 | Plug | 1 |
N4-4-2 Radiator & Hoses, Hot Climate
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***57 | Plug, & Overflow Tube | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
N4-3-2 Radiator, Fittings & Mountings
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 12 |
| 14***7Z | Washer, Spring | 12 |
N4-3-1 Radiator, Fittings & Mountings
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 12 |
| 14***7Z | Washer, Spring | 12 |
N4-1-1 Pump, Water, Aa Build
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
| 02***86 | Gasket | 1 |
N4-4-1 Radiator & Hoses, Aa Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***57 | Plug, & Overflow Tube | 1 |
| 12***32 | Cap, Expansion Bottle | 1 |
N5-1-1 Sump, Oil, & Fittings, Aa Build
| 02***26 | Spacer | 1 |
| 02***73 | Gasket | 1 |
| 02***82 | Plug, Oil Drain | 2 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***39 | Washer | 1 |
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
N5-4-1 Filter, Oil, Aa Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
| 02***96 | Gasket | 2 |
N6-7-3 Filter, Fuel, Aa Build
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-2-3 Injectors, Fuel, & Injection Pipes, Alternative, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-2-1 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-8-1 Pump, Fuel Lift, Aa Build
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-4-1 Fuel Pipes, Tank To Fuel Filter, Aa Build
| 02***17 | Nut | 3 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-6-1 Filter, Fuel Sediment, Aa Build
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***06 | Filter, Swirl Cone | 1 |
N6-5-1 Fuel Heater, & Fuel Feed Pipe, Aa Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
N6-3-1 Fuel Pipes, Injection Pump, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N7-6-1 Compressor 12volt, Air Conditioning
| 13***5Z | Bolt | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
| 99***00 | Compressor, Air Conditioning | 1 |
N7-5-1 Compressor, Air Installation
| 02***59 | Belt, Drive | 1 |
| 33***77 | Bracket, Compressor | 1 |
| 33***79 | Cam, Eccentric Bracket | 1 |
N7-7-2 Heater, Engine Block
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***1Z | Nut | 2 |
N7-7-1 Block Heater, Freeze Plug Type, Optional, Aa Build
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
N8-2-1 Kit, Engine Overhaul, Aa Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-1-1 Gasket Sets, Aa Build
| 02***77 | Kit-Gasket, Bottom | 1 |
| 02***41 | Kit-Gasket, Top | 1 |
P Engine 1004-4 Low Emission, Tier 1
P1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
P1-5-2 Fans, Pulleys, & Fan Belt, Ar Build
| 02***79 | Screw | 3 |
| 02***27 | Belt, Fan, Pair | 1 |
| 02***36 | Pulley, Crankshaft | 1 |
P1-6-2 Timing Case, Camshaft & Gears, Ak Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-3-3 Block Assembly, Ar Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-2-4 Engine, Long, Ak Build 100 Bhp
| 02***36 | Engine, Short | 1 |
P1-2-3 Engine, Long, Ar Build
| 02***41 | Motor, Long | 1 |
P1-2-2 Engine, Short, Ak Build
| 02***60 | Engine, Short, Turbo | 1 |
P1-6-1 Timing Case, Camshaft & Gears, Ar Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-7-1 Flywheel & Housing
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
P1-2-1 Engine, Short, Ar Build
| 02***00 | Engine, Short, Nat/Asp | 1 |
| 02***82 | Engine, Short | 1 |
P1-3-1 Block Assembly, Ar Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P1-4-3 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P1-5-1 Fans, Pulleys, & Fan Belt, High Ambient, Ar Build
| 02***79 | Screw | 3 |
| 02***27 | Belt, Fan, Pair | 1 |
| 02***36 | Pulley, Crankshaft | 1 |
P1-8-2 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
P1-1-2 Engine, Complete, Ak Build, 100bhp
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 100bhp | 1 |
P1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-5-3 Fans, Pulleys, & Fan Belt
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
P1-1-1 Engine, Complete, Ar Build
| 01***00 | Engine, Complete, 1004-4, Nat/Aspirated, 77bhp | 1 |
P1-3-4 Block Assembly, Ak Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P2-1-2 Cylinder Head, Ak Build
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P2-2-3 Rocker Assembly, Push Rods & Tappets, Ar Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P2-2-2 Rocker Assembly, Push Rods & Tappets, Ak Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P2-3-3 Rocker Cover, Ar Build
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***59 | Bracket | 1 |
P2-4-1 Lifting Plates, Engine
| 02***19 | Plate, Lifting | 1 |
| 02***57 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
P2-3-1 Rocker Cover, Ar Build
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
| 02***59 | Bracket | 1 |
P2-3-2 Rocker Cover, Ak Build
| 02***69 | Bush | 3 |
| 02***59 | Bracket | 1 |
| 02***08 | Hose, Oil Breather | 1 |
P2-2-1 Rocker Assembly, Push Rods & Tappets, Ar Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-1-1 Cylinder Head, Ar Build
| 02***21 | Bolt, Cylinder Head | 4 |
| 02***48 | Plug | 1 |
| 02***96 | Plug, Core, D=32mm | 1 |
P3-3-1 Filter, Air, Ar Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Spring | 4 |
| 22***14 | Clip, Jubilee; Replaces Kej0337 | 4 |
P3-1-2 Manifold, Induction, Ak Build
| 02***89 | Hose, Induction | 1 |
| 02***54 | Elbow, Air Induction | 1 |
| 02***55 | Gasket | 1 |
P3-4-4 Spark Arrestor
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 6 |
P3-2-1 Manifold, Exhaust, Ar Build
| 02***36 | Gasket, Ind/Exhst Manifold | 1 |
| 02***37 | Manifold, Exhaust | 1 |
| 02***02 | Stud | 3 |
P3-1-1 Manifold, Induction, Ar Build
| 02***10 | Plug | 1 |
| 02***36 | Gasket | 2 |
| 02***39 | Plate | 1 |
P3-4-1 Exhaust System
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
P3-2-2 Manifold, Exhaust, Ak Builds
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***85 | Manifold, Exhaust | 1 |
P3-4-2 Silencer & Extension, Turbocharged, Ak Build
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***7Z | Bolt, M10x25 | 4 |
P3-4-5 Spark Arrestor
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***7Z | Bolt, M10x25 | 4 |
P3-4-3 Exhaust System
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***7Z | Bolt, M10x25 | 4 |
P3-3-2 Filter, Air, Ak Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Spring | 4 |
| 22***14 | Clip, Jubilee; Replaces Kej0337 | 4 |
P4-3-1 Radiator, Fittings & Mountings
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 14***5Z | Washer, Plain, 1/2" X 41mm Od | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 12 |
P4-4-3 Radiator & Hoses
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 12***39 | Tank, Header, Cooling System | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
P4-3-2 Radiator, Fittings & Mountings
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 14***5Z | Washer, Plain, 1/2" X 41mm Od | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 12 |
P4-2-3 Thermostat, Housing, Inlet & Outlet, Ak Build
| 02***95 | Plug, Taper | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
| 02***46 | O Ring | 1 |
P4-2-2 Thermostat, Housing, Inlet & Outlet, Ar Build
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
P4-4-2 Radiator & Hoses
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 12***39 | Tank, Header, Cooling System | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
P4-4-4 Radiator & Hoses
| 12***03 | Hose, Overflow Assembly | 1 |
| 22***05 | Clip, Jubilee | 2 |
| 22***11 | Clip, Jubilee | 2 |
P4-3-4 Radiator, Fittings & Mountings
| 13***5Z | Bolt | 4 |
| 13***3Z | Bolt, M10 X 16 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
P4-3-3 Radiator, Fittings & Mountings
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 14***5Z | Washer, Plain, 1/2" X 41mm Od | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 12 |
P4-1-1 Pump, Water, Ar Build
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***40 | Pump, Water | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
P4-6-1 Cooling Pack, Service Kit
| 24***12 | Grommet, Panel Hole Dia 29mm, Panel Thk 2.8-3.5mm | 1 |
| 33***49 | Plate, Spacer | 1 |
| 33***51 | Plate, Spacer | 1 |
P4-1-2 Pump, Water, Ak Build
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
| 02***10 | Pump, Water | 1 |
P4-5-1 Fan Guards
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Nut, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
P4-2-1 Thermostat, Housing, Inlet & Outlet, Ar Build
| 02***95 | Plug, Taper | 1 |
| 02***46 | Plug | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
P4-4-1 Radiator & Hoses
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 12***57 | Plug, & Overflow Tube | 1 |
P5-5-1 Cooler, Oil, Filter & Pipework, Ak Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***57 | Adapter | 1 |
| 02***48 | Hose, Straight | 1 |
P5-2-1 Pump, Oil, & Relief Valve, Ar Build
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-4-1 Filter, Oil, & Oil Feed Adaptor, Ar Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***96 | Gasket | 1 |
| 02***65 | Head, Filter | 1 |
P5-2-2 Pump, Oil, & Relief Valve, Ak Build
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-1-1 Sump, Oil, & Fittings, Ar Build
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
P5-1-2 Sump, Oil, Ak Build
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
P5-3-1 Piston Cooling Jets, Ar & Ak Builds
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P6-3-2 Fuel Pipes, Injection Pump, Ak Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 2 |
| 02***48 | Elbow | 1 |
P6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
P6-8-2 Pump, Fuel Lift
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
| 17***00 | Pump, Fuel Lift | 1 |
P6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P6-2-1 Injectors, Fuel, & Injection Pipes, Ar Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***17 | Nut | 1 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
P6-2-2 Injectors, Fuel, & Injection Pipes, Ak Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
P6-3-1 Fuel Pipes, Injection Pump, Ar Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***64 | Olive | 4 |
P6-1-2 Pump, Fuel Injection, Ak Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 2 |
| 02***86 | Bracket | 1 |
P6-1-1 Pump, Fuel Injection, Ar Build
| 02***63 | Bracket, Support | 3 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-5-1 Fuel Heater, & Fuel Feed Pipe, Ar Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
P6-5-2 Fuel Heater, & Fuel Feed Pipe, Ak Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P6-4-2 Fuel Pipes, Fuel Tank To Filter
| 02***17 | Nut | 1 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
P7-5-1 Compressor, Air Installation
| 33***77 | Bracket, Compressor | 1 |
| 33***79 | Cam, Eccentric Bracket | 1 |
| 33***17 | Belt, Drive | 1 |
P7-7-2 Heater, Engine Block
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***1Z | Nut | 2 |
P7-7-1 Block Heater, Freeze Plug Type, Optional, Ar Build
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
P7-2-1 Turbocharger, Pipework & Mounting, Ak Builds
| 02***85 | Clip | 1 |
| 02***75 | Gasket | 1 |
| 02***16 | Adapter, Union | 1 |
P7-6-1 Compressor 12volt, Air Conditioning
| 13***5Z | Bolt | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
| 99***00 | Compressor, Air Conditioning | 1 |
P7-1-2 Turbocharger, Ak Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
| 02***74 | Kit-Sundry Parts | 1 |
P7-1-1 Turbocharger, Ak Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***71 | Housing, Compressor | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
P8-1-2 Gasket Set, Top, Ak Builds
| 02***49 | Kit-Gasket, Top | 1 |
P8-2-2 Gasket Set, Bottom, Ak Builds
| 02***65 | Kit-Gasket, Bottom | 1 |
P8-1-1 Gasket Set, Top, Ar Build
| 02***30 | Kit-Gasket, Top | 1 |
P8-2-1 Gasket Set, Bottom, Ar Build
| 02***26 | Kit-Gasket, Bottom | 1 |
R Engine 1104c-44 Low Emission, Tier 2
R1-3-1 Block Assembly, Re Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***34 | Plug | 1 |
R1-5-2 Fans, Pulleys, & Fan Belt, Re Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***21 | Pulley, Crankshaft, Single Groove | 1 |
R1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
R1-7-1 Flywheel, & Starter Ring Gear, Re Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
R1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Re Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 0 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 0 |
R1-2-1 Engine Short, Re Build
| 02***02 | Engine, Short | 1 |
R1-6-1 Timing Case, Camshaft & Gears, Re Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***35 | Seal, Front Oil | 1 |
R1-1-1 Engine, Complete, Re Build, 82.5bhp
| 01***42 | Engine, Complete 1104c-44, Nat/Asp, 82.5bhp | 1 |
R1-5-1 Fans, Pulleys, & Fan Belt, Re Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***21 | Pulley, Crankshaft, Single Groove | 1 |
R2-2-1 Rocker Assembly, Push Rods & Tappets, Re Builds
| 02***43 | Rod, Push | 8 |
| 02***03 | Nut, Lock | 2 |
| 02***96 | Tappet | 8 |
R2-5-1 Cover, Cylinder Head
| 02***77 | Cover | 1 |
| 02***10 | Bolt | 3 |
R2-1-1 Cylinder Head, Re Build
| 02***95 | Plug, Taper | 1 |
| 02***07 | Plug, Core, D=50mm | 2 |
| 02***34 | Plug | 4 |
R2-6-1 Lifting Plates, Engine, Re Build
| 02***63 | Bracket, Engine Lifting | 1 |
| 33***76 | Bracket, Engine Lifting | 1 |
| 82***01 | Screw | 2 |
R2-7-1 Heater Plugs, & Pick-Up Sensor
| 71***73 | Sensor, Cold Start | 1 |
| 71***66 | Connector, Bar Thermostart | 1 |
| 71***72 | Thermostart | 4 |
R2-4-1 Breather, Engine Oil, Re Build
| 02***64 | Screw | 2 |
| 02***73 | O Ring | 1 |
| 02***74 | Seal | 1 |
R2-3-1 Rocker Cover, Re Build
| 02***07 | Cap, Oil Filler | 1 |
| 02***88 | O Ring | 1 |
| 02***64 | Screw | 10 |
R3-2-1 Manifold, Exhaust, Re Build
| 02***75 | Elbow, Exhaust | 1 |
| 02***17 | Gasket, Exhaust Manifold | 1 |
| 02***29 | Manifold | 1 |
R3-1-1 Manifold, Induction, Re Build
| 02***36 | Gasket | 3 |
| 02***39 | Plate | 3 |
| 02***11 | Connector | 1 |
R3-3-1 Filter, Air
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Spring | 4 |
| 22***14 | Clip, Jubilee; Replaces Kej0337 | 4 |
R3-4-1 Exhaust System
| 02***03 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7D | Setscrew, M8x25 | 1 |
R4-3-1 Radiator, Fittings & Mountings
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***3D | Nut, Self Lock M10 | 8 |
R4-5-1 Fan Guards
| 13***5D | Setscrew, M8x20 | 3 |
| 13***1D | Nut, M8 | 1 |
| 14***7D | Washer, M8 Plain | 3 |
R4-4-1 Radiator & Hoses
| 12***39 | Tank, Header, Cooling System | 1 |
| 13***6D | Screw, M8x20 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
R4-1-1 Pump, Water, Re Build
| 02***80 | Pump, Water Assembly | 1 |
| 02***81 | Kit-Repair, Water Pump | 1 |
| 02***78 | Gasket, W/Pump To T/Case | 1 |
R4-2-1 Thermostat, Housing, Inlet & Outlet, Re Builds
| 02***75 | Thermostat | 1 |
| 02***76 | O Ring | 1 |
| 02***33 | Connector, Water Outlet, Assembly | 1 |
R5-5-1 Cooler, Oil, Re Build
| 02***02 | Gasket, Oil Cooler To Block | 1 |
| 02***03 | Gasket | 1 |
| 02***05 | Cooler, Oil | 1 |
R5-1-1 Sump, Oil, & Fittings, Re Build
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
| 02***12 | Plug | 1 |
R5-4-1 Filter, Oil, & Oil Feed Adapter, Re Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***16 | Connector | 1 |
| 02***31 | Gasket, Oil Filter Head, To Cyl/Block | 1 |
R5-2-1 Pump, Oil
| 02***85 | Pump, Oil | 1 |
| 02***18 | Screw | 5 |
R6-2-1 Injectors, Fuel, & Injection Pipes, Re Build
| 02***26 | Clamp | 1 |
| 02***44 | Clip | 2 |
| 02***45 | Clip | 1 |
R6-6-1 Filter, Fuel Sediment
| 32***71 | Element, Fuel Sediment Filter | 1 |
| 32***73 | Plug, Drain Assembly | 1 |
| 32***81 | Screw, Bleed | 1 |
R6-7-1 Pump, Fuel Lift, & Filter Assembly
| 02***32 | Washer | 3 |
| 02***80 | Screw, M6x40mm | 3 |
| 17***00 | Pump, Electric Fuel Lift, Filter Assembly | 1 |
R6-11-2 Fuel Injection Pump, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-4-1 Fuel System
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
R6-3-1 Fuel Pipes, Injection Pump, Re Build
| 02***23 | Connector, Fuel | 1 |
| 02***26 | Spacer | 1 |
| 02***38 | Bracket, Support | 1 |
R6-11-3 Fuel Injection Pump, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-3-2 Fuel Pipes, Injection Pump, Re Build
| 02***23 | Connector, Fuel | 1 |
| 02***26 | Spacer | 1 |
| 02***38 | Bracket, Support | 1 |
R6-1-2 Pump, Fuel Injection, Re Build
| 02***94 | Gear, Fuel Injection Pump | 1 |
| 02***95 | Washer | 3 |
| 02***96 | O Ring | 1 |
R6-11-1 Pump, Fuel Injection, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-2-2 Injectors, Fuel, & Injection Pipes, Re Build
| 02***26 | Clamp | 1 |
| 02***30 | Hose, Fuel Leak-Off | 3 |
| 02***35 | Cap, Blanking | 1 |
R6-1-1 Pump, Fuel Injection, Re Build
| 02***94 | Gear, Fuel Injection Pump | 1 |
| 02***95 | Washer | 3 |
| 02***96 | O Ring | 1 |
R7-7-1 Heater, Engine Block
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Nut | 2 |
R8-2-1 Gasket Set, Bottom, Re Build
| 02***98 | O Ring | 1 |
| 02***87 | Gasket | 1 |
| 02***12 | O Ring | 1 |
R8-1-1 Gasket Set, Top, Re Build
| 02***56 | Kit-Top Gasket | 1 |
525-50 serial number reference
On JCB Loadall telehandlers, the machine identification plate is located on the right-hand chassis frame near the operator-cab access step or on the right-hand side of the chassis frame. A duplicate serial number is stamped into the main chassis frame between the front and rear axles. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 789308 | Applicable to JCB 525-50 telehandler from machine serial number 789308 onwards. This range is documented in the JCB Loadall 520-50, 525-50, and 525-50S service and operator manuals. | Verify with your dealer for specific configuration differences. |
Frequently asked questions
What engine does the JCB 525-50 use?
The JCB 525-50 is powered by a Perkins 1004-4 turbocharged diesel engine.
What is the operating weight of the JCB 525-50?
The operating weight is approximately 5.4 tons (11,905 lb), varying by configuration.
What model replaced the JCB 525-50?
The JCB 525-58 succeeded the 525-50 in the Loadall lineup.
What 525-50 owners discuss
What are the known powertrain and hydraulic behaviors for the JCB 525-50?
The JCB 525-50 utilizes a synchroshuttle transmission. Community reports indicate the transmission is generally reliable for the first 4,000 hours but may require costly rebuild thereafter. Common failures include burnt forward clutch packs and issues with the shuttle reverser. Operators note that the dump spool must be correctly adjusted for the transmission to drive properly. Hydraulic performance varies by series; newer models (post-2013) have increased hydraulic speed and power but may lock out safety features earlier than older models. The shuttle box requires regular maintenance, including checking the suction strainer to prevent loss of drive in forward or reverse.
What undercarriage or wear patterns are typical for this machine type?
The JCB 525-50 operates on a wheeled chassis with 335/80 R18 tires. The standard operating weight is 5.4 tons (11,905 lb). Wear patterns are influenced by the machine's 5-meter (16.4 ft) lift height and 2.5-ton (5,511 lb) nominal load capacity. Operators report that the compact design allows for maneuverability in tight spaces, but the weight distribution requires careful attention to ground pressure. The machine is designed for both agricultural and construction applications, with tire pressure recommended at 40 bar (580 psi) for normal operating conditions.
What are the engine quirks per series for the JCB 525-50?
The JCB 525-50 is equipped with a Perkins 1004-4 4-cylinder diesel engine delivering 80 HP. Engines manufactured prior to 2013 (Tier 3) are reported to have more fuel pump problems compared to the Tier 4 common rail engines introduced in 2013. The Tier 4 models are associated with injector issues that are described as common and expensive to fix. New engines should be run in immediately without extended idling to prevent glazing of piston cylinder bores. JCB 10W/30 multigrade oil is recommended for the first 100 hours of operation for new or reconditioned engines.
What are common electrical or sensor issues?
Machines manufactured from 2013 onwards have increased electrical complexity due to the Tier 4 engine and associated ECU systems. Operators report intermittent starting problems that may be caused by faulty sensors or injector issues. The starter solenoid post must be secure, as loose connections are a common cause of starter failure. Electrical faults have been reported as a significant issue in newer models, with some machines breaking down on the production line. Operators are advised to verify starter motor amp draw and ensure full battery voltage to the solenoid signal wire.
What should be checked when buying a used 525-50?
When purchasing a used JCB 525-50, verify transmission operation by checking for smooth engagement in forward and reverse and ensuring the dump spool is adjusted correctly. Inspect the shuttle box suction strainer for blockage. Check the engine for signs of excessive oil consumption or glazing if it was recently reconditioned. Verify the condition of Tier 3 vs. Tier 4 engines, noting that Tier 4 models may have expensive injector issues. Check the electrical system for intermittent starting problems and verify the integrity of starter solenoid connections.
What are the fluid specifications and capacities for the JCB 525-50?
The engine oil capacity is 15.4 liters (4.07 gal). The coolant mixture should be 55% antifreeze, which starts to freeze at -36° C (-33° F), with a capacity of 9.35 liters (2.47 gal) or 12.92 liters (3.41 gal) depending on the specific configuration. The total hydraulic system capacity varies by equipment configuration and should be filled with all rams closed while watching the level sight glass. JCB MPL Grease is recommended for lubrication; greasing intervals are reduced to 10 hours if this grease is used instead of the standard 50-hour interval. Lithium-based, No. 2 consistency grease is also specified for certain components.
What safety-critical fixes are associated with the JCB 525-50?
Ensure the dump spool is correctly adjusted to prevent transmission drive failure. Verify the starter solenoid post is secure to prevent intermittent starting. Check the shuttle box suction strainer to maintain drive capability.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 525-50. Related factory variants of the same model family:
525-50
Need a specific 525-50 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.