JCBagriculturaltelescopic handlers (loadall)
Jcb 520S LE
Maintenance schedule, common problems & OEM parts breakdown
The JCB 520S LE is a telescopic handler (telehandler) belonging to the 500 Series Loadall family, produced from 1993 to 2004. It is a high-power variant of the 520 series, featuring a 90 hp turbo-charged engine and starting at serial number the OEM part reference. The machine weighs approximately 4.87 tons (9,900 lbs) and offers a nominal load capacity of 2 tons at the center of gravity with a lift height of 5.09 meters (16 ft 8 in). Configurations include Farm Special and Construction models with Rear Steering (RS) or All Wheel Steering (AWS). The 520S succeeded the 520-55 and preceded later 500 Series iterations like the 520-50.
The 520S LE matters in the used market due to its robust Dieselmax or EcoMAX engine lineage, which allows for extended 500-hour oil intervals without DEF or DPF regeneration, reducing downtime compared to competitors. The model's popularity stems from its versatile attachment compatibility, including skid steer adapters, and its durable Synchro Shuttle or Powershift transmission options. As a discontinued model, parts availability and service knowledge are critical, with the machine remaining a staple in agriculture and construction for its compact footprint and high lift capacity.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 520S LE specifications
Engine
| Model | JCB 2257 |
| Gross Power | 76 hp (56.7 kW) @ 2,000 rpm |
| Torque | 213.7 lb-ft (289.7 Nm) @ 1,400 rpm |
| Cylinders | 4 |
| Displacement | 269 cu in (4,402 cm³) |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 9,900 lbs (4,490 kg) |
Dimensions
| Transport Length | 16 ft 0 in (0 m) |
| Transport Width | 6 ft 6 in (0.15 m) |
| Transport Height | 6 ft 11 in (0.28 m) |
| Wheelbase | 5.02 ft (1.53 m) |
| Ground Clearance | 0.99 ft (0.30 m) |
| Turning Radius (Outside) | 9.85 ft (3.00 m) |
Performance
| Lift Capacity | 4,400 lbs (1,996 kg) |
| Max Lift Height | 16.41 ft (5.00 m) |
| Max Forward Reach | 9.75 ft (2.97 m) |
Service capacities (summary)
| Fuel Tank | 16 gal (60.6 L) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
520S LE fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 2.6 L (10 US gal) | JCB 15W/40 Multigrade (SAE 15W/40, MIL-L-46152B, API CD/SE, MIL-L-2104) for -10 °C to 50 °C (14 °F to 122 °F); JCB Super Universal Agricultural SAE 10W/30 (MIL-L-2105, MIL-L-46152) for -15 °C to 30 °C (5 °F to 86 °F); JCB 10W/30 Multigrade for first 100 hours of new/reconditioned engine operation. |
| Cooling System | 4.6 L (18 US gal) | JCB Universal Antifreeze/water (ASTM D3306-74). 55% antifreeze mixture provides freeze protection to -36 °C (-33 °F). |
| Fuel Tank | 60.5 L (16 US gal) | Standard diesel fuel. |
| Transmission/Powertrain (Syncro Shuttle) | 4.8 L (18.25 US gal) | JCB Special Transmission Fluid (ESP-M2C 33G); JCB Torque Converter Fluid (SAE 10W, MIL-L-46152, MIL-L-2104D) for -18 °C to 0 °C (0 °F to 32 °F). |
| Final Drives / Axle Housings | 4.6 L (18 US gal) per housing | JCB Special Gear Oil (ESEN-M2C 86A/B). |
| Hydraulic System (Nominal Machine Capacity) | Not specified (Note: Total capacity depends on equipment configuration; fill with all rams closed and check sight glass) | JCB Genuine Hydraulic Oil (high thermal/oxidation stability, demulsibility, foam/air release resistance). |
| Grease | N/A | Lithium based, NLGI No. 2 consistency; Lithium complex NLGI No. 2 consistency. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 520S LE maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 520S LE beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic, axle, and final drive systems to establish a baseline. JCB engines do not use DEF or DPF, allowing 500-hour oil changes with JCB Engine Oil Special or equivalent 15W-40. Inspect the hydraulic return filter magnet for metallic debris before disposal. Monitor coolant levels and check for leaks at the kingpost and boom rams. Use JCB-spec long-life coolant for replacements. Regular fluid analysis prevents bearing and seal failures 500 to 800 hours before catastrophic failure.
Corrective & Common Repairs
Common repairs involve the Synchro Shuttle or Powershift transmission, requiring JCB High Performance Transmission Fluid; Dexron ATF is prohibited. Check turbocharger shaft play and wastegate function on Dieselmax units. Inspect inboard front axle brakes and immersed brake condition. Replace primary and secondary fuel filters to protect common-rail injectors. Verify ECU or relay-controlled transmission function. Address cylinder rod scoring and fitting weep at the kingpost. Ensure slew ring bolts are torqued to spec on excavator variants.
Overhaul & Rebuild Points
The 2000-hour service mandates a full hydraulic oil change and tank cleaning. Inspect structural components: boom, arm/dipper, loader arm, chassis, and side frames for cracking or unauthorized welding. Measure swing ring play on JS-series excavators using a dial indicator. Check injector spray patterns via diagnostic tool. Service cab HVAC, including A/C pressure and evaporator condition. Inspect complete electrical systems. Structural integrity checks are critical for long-term reliability in high-cycle applications.
Seasonal & Environment Servicing
In cold weather, use JCB Super Universal Agricultural SAE 10W-30 oil for temperatures down to -15°C (5°F). For extreme cold, use JCB 10W/30 Multigrade for the first 100 hours of new engine operation. Mix coolant with antifreeze to prevent freezing at -36°C (-33°F). Check tire pressure and cut damage for turf or standard applications. Grease all pin points every 10 hours if using JCB Special MPL Grease. Inspect hoses and cylinders for chafing. Ensure cab HVAC is serviced for operator comfort in varying climates.
520S LE common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925371 | Element, Fuel Sediment Filter | Fuel system service | Check fitment → |
| 32/925543 | Filter, Fuel Sediment | Fuel system service | Check fitment → |
| 32/925366 | Filter, Fuel Sediment | Fuel system service | Check fitment → |
| 32/925372 | Bowl, Fuel Sediment Filter | Fuel system service | Check fitment → |
| 17/919300 | Pump, Electric Fuel Lift, Filter Assembly | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
520S LE fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Clogged fuel filters, failing lift pump, or restricted fuel line | Check fuel filter condition and fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor, short to ground, or low coolant level | Inspect sensor wiring and verify coolant level |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or wiring fault | Check sensor electrical connections and oil level |
| P2047 | Reductant (DEF/AdBlue) injector circuit open | SCR system fault, open injector circuit, or clogged doser | Inspect DEF injector wiring and nozzle for blockage |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus network fault, loose connector, or low battery voltage | Check battery terminals, ground straps, and CAN harness connections |
| 101 | Low transmission clutch pressure detected | Hydraulic system issue, low fluid, or transmission pressure sensor fault | Check transmission fluid level and hydraulic pressure |
| P0102 | MAF (Mass Air Flow) sensor low voltage fault | Dirty or faulty air intake sensor, or intake air leak | Clean air filter and inspect intake piping for leaks |
| P0335 | Crankshaft Position Sensor 'A' circuit no signal | Faulty crank sensor, damaged wiring, or sensor gap issue | Inspect crank sensor wiring and sensor mounting |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
520S LE attachments & work tools
Skid Steer Mounting Plates & Adapters
JCB telehandler mounting plates are available for the 520 series, including the 520 (year 2000 and newer), 520-40, 520-50, and 527-55. These plates are 100% welded and unpainted, designed to be welded to attachments or buckets for compatibility with standard skid steer tooling. A specific loader-to-skid-steer hitch adapter is also offered to convert the JCB 520 loader carriage to a standardized skid steer interface.
Work Tool Families
Compatible work tools include buckets, pallet forks, grapples, brooms, snow blades, and augers. These tools are typically mounted using the aforementioned skid steer mounting plates or adapters rather than a direct factory quick-coupler system. The machine's load capacity and hydraulic flow must be verified for specific attachments, particularly for non-articulated backhoes or heavy-duty tools.
Coupler/Mounting Systems
The primary mounting system for third-party skid steer attachments is an adapter plate or hitch that converts the telehandler's carriage to a skid steer pattern. This adapter adds approximately 91 kg (200 lbs) to the weight of any attached tool. The forklift carriage remains an integral part of the machine, with the skid steer plate serving as the interface for alternative tooling.
Hydraulic Kit/Arrangement Notes
Operators must verify that the machine's hydraulic flow is sufficient to operate specific attachments, such as backhoes or rotary brooms. The total hydraulic system capacity varies depending on the equipment being used and the configuration of the machine. Proper fluid levels should be checked using the sight glass with all rams closed.
Factory Configurations & Guarding
The 520S is identified as a high-power variant starting from serial number the OEM part reference, featuring a 90 hp turbo-charged engine. The machine is equipped with a 4-speed Synchro shuttle transmission and non-ballasted 10.5/80-18 tires for stability. Optional features include all-wheel steering (AWS) and rear steering (RS) configurations depending on the specific model year and build.
All 520S LE assemblies by section
Every catalogued assembly group for the Jcb 520S LE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-15-1 Shovel, 1.1 Cu.M, 2290mm Wide
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
| 54***01 | Toeplate, Bolt On, 2286 X 200, 8 Hole, Double Edge | 1 |
A1-3-3 Shovel, Grain/Potato, 2.08m3
| 98***72 | Shovel, Grain/Potato, 2290mm Wide | 1 |
| 98***82 | Toe Plate 7'6" | 1 |
A1-12-1 Shovel, 1.25 Cu.M, 2286mm (7'6") Wide
| 13***18 | Bolt | 2 |
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
A1-3-1 Bucket, Grain,Potato
| 98***00 | Shovel, Grain/Potato 1.38 M., 2110mm Wide | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A1-2-1 Tooth Guard
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***6Z | Bolt, M12 X 70mm | 2 |
| 13***1Z | Nut | 2 |
A1-11-1 Shovel, 1.0 Cu.M, 2286mm (7'6") Wide
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A1-11-3 Shovel,1.0 Cu.M, 2286 Wide
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A1-3-2 Shovel, Grain/Potato, 1.38m3
| 98***71 | Shovel, Grain Potato, 2134mm Wide | 1 |
| 98***82 | Toe Plate 7'6" | 1 |
A1-1-2 Shovel, 1.1cu, 2235mm(7"4')Wide
| 13***1Z | Nut | 16 |
| 53***05 | Tooth | 8 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-11-2 Shovel, 0.9cu.M, 2286mm (7'6") Wide
| 13***1Z | Nut | 16 |
| 13***02 | Nut | 8 |
| 14***11 | Washer | 8 |
A1-13-1 Shovel, 1.25cu Yds, 8' Wide
| 13***1Z | Nut | 12 |
| 14***1Z | Washer, M16 Plain | 12 |
| 54***76 | Shovel, 8' Wide, 1.25cu. Yds | 1 |
A1-4-1 Bucket,Rehandling
| 51***02 | Kit-Nut & Bolt, M20 | 14 |
| 51***06 | Kit-Nut & Bolt, M16 | 14 |
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
A1-6-2 Shovel,Clam 6-In-1, 2260 Wide
| 12***23 | Bush | 2 |
| 12***00 | Jaw, Clamshovel | 1 |
| 13***6Z | Bolt | 2 |
A1-6-1 Shovel,Clam 4-In-1
| 51***02 | Kit-Nut & Bolt, M20 | 14 |
| 51***06 | Kit-Nut & Bolt, M16 | 14 |
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
A1-1-1 Shovel, 0.9c.U.M
| 13***1Z | Nut | 16 |
| 13***1Z | Nut | 8 |
| 14***2Z | Washer, M20 | 8 |
A1-11-4 Shovel,0.9 Cu.M, 2110 Wide
| 98***00 | Shovel, 0.7 Cu M | 1 |
| 98***00 | Shovel, W.A. 0.9 Cu.M. | 1 |
A1-5-1 Bucket, Root Crop
| 81***51 | Plate, Data; Replaced By 81***02 | 1 |
| 82***15 | Screw | 4 |
A1-10-1 Tooth Guard
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***4Z | Bolt | 4 |
| 13***6Z | Bolt, 1/2" X 2.1/4" Long | 2 |
A1-14-1 Bucket, Grain
| 54***00 | Bucket, Grain, 70cu Ft | 1 |
A3-31-1 Wrapped Bale Clamp
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
| 13***3Z | Nut, M20 | 3 |
A3-28-2 Sweeper Collector, Mounting Frame, Dirtmaster
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A3-4-8 Installation, Hydraulic Pin Lock, Quickfit Carriage
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***2Z | Screw, M6 X 50 | 1 |
A3-12-3 Multi-Shovel
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***3Z | Nut, M12 | 8 |
A3-47-1 Box Tipper, Sideways
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-4-1 Quickhitch, Tool Carrier
| 15***01 | Ring, Key 38mm Diameter, Approx | 1 |
| 16***07 | Wire, Rope, 650mm Long | 1 |
| 54***04 | Lug | 2 |
A3-23-2 Big Bale Grab
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 1 |
| 54***07 | Kit-Seal | 1 |
| 98***00 | Grab, Bale | 1 |
A3-70-3 Air-Con Condenser, Kit
| 13***3Z | Screw, M6x16 | 2 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
A3-70-5 Air-Con Electrics
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 3 |
| 70***52 | Decal, Heater Fan Blower | 1 |
| 70***92 | Decal, Air-Con. Switch | 1 |
A3-4-15 Quickhitch, Carriage, Usa
| 13***0Z | Bolt | 2 |
| 13***3Z | Screw; Replaces 69***21 | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
A3-70-6 Air-Con Compressor, Kit
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***8Z | Bolt, M8x80mm Long | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
A3-37-2 Carriage, Matbro
| 33***20 | Pin, Locking | 2 |
| 33***22 | Cylinder, Hydraulic | 2 |
| 33***08 | Rod, Cylinder | 1 |
A3-18-1 Guard, Load, Q-Fit, Carriage
| 54***19 | G.A. | 1 |
| 54***71 | Guard, Q-Fit | 1 |
| 82***03 | Grommet | 4 |
A3-4-9 Locking Pin Kit, Hydraulic, Q-Fit, Carriage Option
| 13***8Z | Bolt, 5/16"Unf X 2.5" Long | 2 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
A3-10-1 Fork, Manure, Silage, With Top Grab, 2.29m Wide X 1.9 Cu.M
| 54***04 | Bolt, Nut | 4 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-27-3 Sweeper Collector, Gutter Brush, Dirtmaster 210
| 13***9Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
A3-6-7 Clevis Hitch
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-4-6 Quickhitch, Carriage, Usa
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-28-1 Sweeper Collector, Mounting Frame
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A3-4-10 Locking Pin Kit, Hydraulic 'Q' Fit, Conversion
| 13***4Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
A3-25-1 Sweeper Collector, Beta
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
A3-22-1 Man Platform, Uk,Usa & Spain Only
| 15***00 | Pin | 2 |
| 81***84 | Decal, Warning, Platform Securing | 1 |
| 81***21 | Decal, Jcb Platform | 1 |
A3-3-1 Quickhitch, Tool Carrier
| 15***01 | Ring, Key 38mm Diameter, Approx | 1 |
| 16***45 | G.A. | 1 |
| 16***02 | G.A. | 1 |
A3-37-1 Carriage, Manitou
| 54***63 | Carriage, Hydraulic Locking, (Manitou) | 1 |
A3-27-4 Sweeper Collector, Gutter Brush
| 13***9Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
A3-4-5 Quickhitch, Carriage
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-1-1 Fork Frame,Forks &, Load Guard
| 13***8Z | Bolt, M10x80 | 1 |
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
A3-19-1 Tow Hitch,Manual, Installation
| 10***03 | Wire, Retaining | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-9-1 Fork, Manure, Silage
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
| 54***04 | Nut | 9 |
A3-27-2 Sweeper Collector, Hyd/Circuit & Decals, Dirtmaster 210
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 2 |
A3-32-1 Tool Carrier, Hydraulic
| 13***0Z | Capscrew, M12x40 | 6 |
| 24***21 | O Ring | 2 |
| 24***02 | Seal, Gland | 2 |
A3-17-1 Fork, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 81***68 | Plate, Rating | 1 |
A3-16-1 Jib, 4 Metre, Extension, 350kg
| 53***01 | Link, 1.25 Ton | 1 |
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
A3-6-1 Tow Hitch, Hydraulic, Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut | 4 |
A3-4-2 Quickhitch, Tool Carrier(Black), Mechanical (German)
| 15***01 | Ring, Key 38mm Diameter, Approx | 1 |
| 16***07 | Wire, Rope, 650mm Long | 1 |
| 33***73 | Carriage, G.A, Black(German), Mech Tool Carrier | 1 |
A3-27-6 Sweeper Collector, Tank & Sprinkler, Dirtmaster
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
A3-4-20 Installation, Locking Pin, Hydraulic Quick Fit
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
A3-4-13 Quickhitch,Carriage
| 13***0Z | Bolt | 2 |
| 13***3Z | Screw; Replaces 69***21 | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
A3-4-7 Guard, Load, 'Q'Fit Carriage
| 54***00 | G.A. | 1 |
| 54***00 | Guard, Load; San 23375.Mss To 33***49 & 83***67.28/2/7, P Gamble. L06/223 | 1 |
| 82***12 | Pin, Lynch | 2 |
A3-43-1 Fork, Manure, Silage, With Top Grab,2.29m, Wide X 1.9 Cu.M
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-27-1 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A3-4-12 Quickhitch,Carriage
| 13***0Z | Bolt | 2 |
| 13***3Z | Screw; Replaces 69***21 | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
A3-27-5 Sweeper Collector, Hydraulic Circuit, Gutter Brush Option
| 14***11 | Seal, Bonded | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 9 |
A3-70-2 Air-Con Compressor, Kit
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***8Z | Bolt, M8x80mm Long | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
A3-14-1 Heston Bale Grab
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Clamp, Heston Bale Grab | 1 |
A3-11-1 Fork, Manure, Silage, With Push Off
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Fork, Manure C/W Push Off, 2160mm Wide 1.50cu.M | 1 |
A3-6-5 Tow Hitch, Hydraulic, Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut | 4 |
A3-37-6 Carriage,Sanderson, Lever Locking
| 54***65 | Carriage, Lever Locking, (Sanderson) | 1 |
A3-32-4 Tool Carrier, Hydraulic
| 13***7Z | Bolt, M10x25 | 3 |
| 13***0Z | Capscrew, M12x40 | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
A3-44-1 Manure, Silage Fork
| 54***01 | Frame | 1 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-37-3 Carriage,Sanderson, Hydraulic Locking
| 54***61 | Carriage, Hydraulic Locking, (Sanderson) | 1 |
A3-40-1 Kits
| 16***67 | Kit, Fork Transit, Toe Plates/Wide Fork | 1 |
| 16***68 | Kit, Fork Transit, Std Fork/No Toe Plat | 1 |
| 54***30 | Fork, Frame & Side Shift, Complete | 1 |
A3-24-1 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 16***03 | Adapter | 2 |
A3-30-1 Carriage, Sideshift
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-55-2 Skip, Volume 1.5 Cu.M, 3mm Thick
| 13***1Z | Nut | 2 |
| 33***49 | Bar | 1 |
| 33***52 | Bar | 1 |
A3-10-6 Multi-Fork, With Top Grab, Standard Tines
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 80mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
A3-46-1 Bucket, Rehandling
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Slurry/Rehandling | 1 |
A3-70-1 Air-Con Base Kit
| 01***04 | Belt, Drive | 1 |
| 13***3Z | Screw, M6x16 | 1 |
| 14***1Z | Washer | 1 |
A3-10-4 Muck Fork & Grab
| 33***03 | Grab Box | 2 |
| 33***04 | Grab, Outer Claw | 1 |
| 33***09 | Grab, Inner Claw | 1 |
A3-21-8 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-5-1 Tow Hitch, Hydraulic
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
A3-25-4 Sweeper Collector, Dirtmaster, Lh Drive
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 12 |
| 13***8Z | Bolt, M10 X 30 | 4 |
A3-32-2 Tool Carrier, Hydraulic, Black, German
| 13***0Z | Capscrew, M12x40 | 6 |
| 24***21 | O Ring | 2 |
| 24***02 | Seal, Gland | 2 |
A3-23-1 Flat 8 Bale Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-10-2 Muck Fork & Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-21-5 Carriage, Fork, Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-55-4 Skip, Volume 1.5 Cu.M, 5mm Thick
| 13***1Z | Nut | 2 |
| 33***49 | Bar | 1 |
| 33***52 | Bar | 1 |
A3-41-1 Fork, Manure, Silage, With Top Grab &, Parallel Push Off
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-4-11 Quickhitch,Carriage, Industrial,Black
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-55-3 Skip, Volume 1.1 Cu.M, 5mm Thick
| 13***1Z | Nut | 2 |
| 33***49 | Bar | 1 |
| 33***52 | Bar | 1 |
A3-15-1 Fork. Round Bale
| 54***03 | Fork, Tine, Long | 4 |
| 81***15 | Plate, Operator Instruction, Norwegian | 4 |
| 81***68 | Plate, Rating | 1 |
A3-1-5 Fork Frame, Forks &, Load Guard
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***9Z | Bolt, M12x90mm | 1 |
| 13***3Z | Nut, Lock, M10 | 2 |
A3-12-7 Shovel,Grain, 2.25 Cum
| 33***00 | Plate, Toe | 1 |
| 98***73 | Decal, Side Logo | 2 |
| 98***42 | Shovel, Grain 2.25 Cum | 1 |
A3-42-1 Fork, Manure, Silage, Parallel Push Off
| 98***01 | Ram, Assembly | 2 |
| 98***00 | Fork, Manure & Push Off | 1 |
| 98***01 | Fork, Tine; Same As 54***03 See San 08844. San Done Due, To Strimech Information To M Roberts(Attach) | 9 |
A3-46-5 Shovel, Rehandling, 2300mm Wide, France
| 98***45 | Shovel, Rehandling 1.8m3, 2300 Wide | 1 |
| 98***46 | Shovel, Rehandling 1.5m3, 2300 Wide | 1 |
| 98***52 | Shovel, Rehandling 1.8m3, 2300 Wide | 1 |
A3-4-14 Quickhitch,Carriage, Industrial,Black
| 13***0Z | Bolt | 2 |
| 13***3Z | Screw; Replaces 69***21 | 1 |
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
A3-4-4 Quickhitch, Carriage
| 13***0Z | Bolt | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 4 |
| 13***4Z | Nut | 2 |
A3-37-4 Carriage,Manitou, Hand Pin Locking
| 54***67 | Carriage, Hand Pin Locking, (Manitou) | 1 |
A3-12-1 Fork, Manure, Silage, With Top Grab &, Parallel Push Off
| 81***68 | Plate, Rating | 1 |
| 82***15 | Screw | 4 |
| 98***00 | Fork, Manure, Silage, Push Off & Top Grab | 1 |
A3-55-1 Skip, Volume 1.1 Cu.M, 3mm Thick
| 13***1Z | Nut | 2 |
| 33***49 | Bar | 1 |
| 33***52 | Bar | 1 |
A3-50-1 Grapple, Industrial
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 90***00 | Ram, Assembly, Left Side | 1 |
| 90***00 | Ram, Assembly, Right Side | 1 |
A3-44-2 Fork Manure, Spring Tines
| 54***02 | Boss | 9 |
| 54***04 | Nut | 9 |
| 81***02 | Plate, Data | 1 |
A3-26-1 Sweeper Collector, Drive/Brush Assembly, Beta
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-10-3 Muck Fork
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-25-2 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A3-70-4 Air-Con, Receiver Drier Kit
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***3Z | Nut | 2 |
A3-7-1 Crane Fork Mounted
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 1 |
A3-28-3 Frame, Q/Hitch, 7' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
A3-45-1 Bucket, Grain, Potato
| 98***01 | Toeplate, Weld On | 1 |
| 98***00 | Bucket, Grain & Potato | 1 |
| 98***36 | Shovel, Grain Potato | 1 |
A3-6-6 Rockinger Hitch
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M16 | 4 |
| 13***3Z | Nut, M20 | 4 |
A3-29-1 Silashear
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-26-2 Sweeper Collector, Drive/Brush Assembly, Dirtmaster 210
| 13***7Z | Screw, Hexagon M8 X 25 | 22 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***8Z | Bolt, M10 X 30 | 2 |
A3-33-1 Tool Carrier, Hyd Installation
| 14***11 | Seal, Bonded | 3 |
| 16***02 | Adapter, 1/4" Bsp M/M | 3 |
| 54***04 | Lug | 2 |
A3-5-2 Tow Hitch, Hydraulic, 526s & 526(Usa), 24"Wheels Only
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
A3-25-3 Sweeper Collector, Dirtmaster, Rh Drive
| 13***3Z | Screw, M8 X 16 | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 12 |
| 13***8Z | Bolt, M10 X 30 | 4 |
A3-10-5 Multi-Fork, With Top Grab, Spring Tines
| 13***4Z | Bolt | 4 |
| 13***8Z | Bolt, M12 X 80mm | 9 |
| 13***1Z | Bolt, M12x110 | 1 |
A3-21-1 Fork Frames & Forks, Industrial
| 54***17 | Fork, Frame 1370mm Wide | 1 |
| 54***37 | G.A. | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
B Bodywork, Cab, Loader End
B1-9-5 Counterweight, Internal
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***9Z | Bolt, M20 X 90 | 1 |
| 13***2Z | Nut, Thin M20 | 1 |
B1-6-1 Tank,Hydraulic &, Battery Box
| 12***86 | Cover, Plate | 1 |
| 12***00 | Filter, Hydraulic Assembly, 5 Micron; Replaced By 27***00, See San07947 | 1 |
| 13***5Z | Bolt | 4 |
B1-13-2 Sound Proofing, Engine Compartment
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***73 | Panel, Sound Proofing, R.H. Front Engine | 1 |
B1-4-10 Rear Light Arms, Black
| 12***53 | Washer, Rebound | 2 |
| 13***3Z | Screw, M6x16 | 6 |
| 13***1Z | Bolt, M12x110 | 2 |
B1-7-2 Tank,Diesel Fuel
| 12***86 | Catch, Vandal Cover | 1 |
| 13***3Z | Screw, M6x16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-1-4 Chassis, 526 & 526s, Revised Cooling
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***0Z | Bolt, M10 X 40 | 8 |
B1-9-3 Bodywork & C/Weight, Rear End, Noise Reduction
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***0Z | Bolt, M24 X 200mm Long | 2 |
| 13***3Z | Nut | 2 |
B1-7-4 Tank,Diesel Fuel
| 12***86 | Catch, Vandal Cover | 1 |
| 13***3Z | Screw; Replaces 69***21 | 5 |
| 13***3Z | Screw, M6x16 | 4 |
B1-5-1 Cover, Engine (Plastic)
| 12***21 | Padlock | 2 |
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***7Z | Bolt | 4 |
B1-2-2 Belly Guards &, Valve Block Cover
| 13***5Z | Bolt, M5 X 20mm Long | 5 |
| 13***7Z | Screw, Hexagon M8 X 25 | 16 |
| 13***8Z | Screw, M8x30 | 6 |
B1-9-2 Bodywork & C/Weight, Rear End
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
B1-4-6 Mirror Assembly, Quickhitch, Plastic Bonnet
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 12***74 | Glass, Convex Mirror | 1 |
B1-1-3 Chassis, Revised Cooling, 520
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 8 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-2-1 Belly Guards &, Valve Block Cover
| 13***5Z | Bolt, M5 X 20mm Long | 5 |
| 13***7Z | Screw, Hexagon M8 X 25 | 16 |
| 13***8Z | Screw, M8x30 | 6 |
B1-13-1 Sound Proofing, Engine Compartment
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***66 | Panel, Sound Proofing, R.H. Front Engine | 1 |
B1-5-3 Cover, Engine
| 12***21 | Padlock | 2 |
| 12***55 | Handle | 1 |
| 13***1Z | Bolt | 4 |
B1-4-5 Mirror/Light, Chassis Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 1 |
| 13***2Z | Bolt, M12x50mm Long, Tuf-Lok | 1 |
B1-4-7 Mirrors
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 2 |
B1-1-2 Chassis, 526 & 526s
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***1Z | Nut | 4 |
B1-9-6 Counterweight, Internal
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***9Z | Bolt, M20 X 90 | 1 |
| 13***2Z | Nut, Thin M20 | 1 |
B1-11-1 Toolbox
| 12***71 | Padlock | 1 |
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***3Z | Bolt, M10 X 16 | 2 |
B1-1-1 Chassis, 520
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 47 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***1Z | Nut | 4 |
B1-3-1 Fenders, & Mirror/Light Brkts
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 1 |
B1-5-2 Cover, Engine
| 12***21 | Padlock | 2 |
| 12***55 | Handle | 1 |
| 13***1Z | Bolt | 4 |
B1-10-1 Light Extension,Rear, Yellow
| 12***02 | Plate, Compression | 2 |
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***2Z | Bolt, M12 X 120 | 2 |
B1-6-2 Tank,Hydraulic &, Battery Box
| 12***30 | Filter, Hydraulic Assembly; San 22599.Ss To 58***75.Ref A Wrixon,Hydac,, Pgamble,P Guest.22/8/2006. | 1 |
| 12***00 | Filter, Hydraulic Assembly, 5 Micron; Replaced By 27***00, See San07947 | 1 |
| 13***5Z | Bolt | 4 |
B1-7-1 Tank,Diesel Fuel
| 12***86 | Catch, Vandal Cover | 1 |
| 13***3Z | Screw, M6x16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-3-2 Fenders, 526s & (526 Usa), 24" Wheels (Black)
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 32 |
| 13***7Z | Bolt | 2 |
B1-7-3 Tank, Diesel Fuel
| 12***86 | Catch, Vandal Cover | 1 |
| 13***3Z | Screw, M6x16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B1-9-1 Bodywork & C/Weight, Rear End
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, M20 | 2 |
B1-8-1 Steer Sensor, Installation
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 5 |
| 16***80 | Guard, Steer Sensor | 2 |
B1-1-10 Chassis Rear Plate, Service Only
| 16***47 | Plate, Rear | 1 |
B2-9-8 Seat, Air Suspension, Deluxe Cloth
| 40***03 | Kit, Backrest Foam | 1 |
| 40***05 | Kit, Seat Squab Foam | 1 |
| 40***01 | Frame, L.H., Assembly | 1 |
B2-4-2 Panel,Instrument, Covers,Mats,Brackets
| 12***31 | Vent, Air Register | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 4 |
B2-1-3 Cab Glazing, Safety Frame
| 16***60 | Cab, Frame | 1 |
| 82***34 | Glass, R.H. Side Clear; San 21314. S/S By Cwe.P Gamble 05/05***05, Pi L04/312a | 1 |
| 82***08 | Glass, Cab Roof, Tinted | 1 |
B2-12-1 Fire Extinguisher
| 14***03 | Screw | 2 |
| 16***78 | G.A. | 1 |
| 16***83 | Extinguisher, Fire | 1 |
B2-7-10 Arm Rest Abi
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B2-10-1 Guard Windscreen
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***2Z | Nut, M8 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B2-9-1 Seat
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 8 |
B2-9-2 Seat, Suspension Xh2/T1, Fabric Trim
| 19***03 | Kit-Height Adjuster | 1 |
| 19***04 | Kit-Damper Assembly | 1 |
| 19***05 | Stop, Bump | 1 |
B2-2-1 Cab
| 12***05 | Bolt, Closing | 1 |
| 12***07 | Knob, Interior | 1 |
| 12***02 | Handle, Left Hand | 1 |
B2-9-3 Seat, Suspension, Fixed & Adjustable
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-6-1 Cab/Canopy, Conversion Kit
| 16***25 | Cab/Canopy, Conversion; See Note 1. To Be Supplied By 500 Division | 1 |
B2-15-1 Cab Mirror, External
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, Spring | 2 |
B2-12-2 Fire Extinguisher, For Machines With, (40/910612) Suspension Seat, See B2-9-8
| 14***03 | Screw | 2 |
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
| 33***16 | Bracket, Mounting Pressing | 1 |
B2-4-1 Panel,Instrument, Covers,Mats,Brackets
| 12***31 | Vent, Air Register | 2 |
| 14***06 | Screw | 4 |
| 16***64 | Panel, Instrument Housing | 1 |
B2-13-2 Sun Blind
| 33***37 | Hook, Roller Blind | 1 |
| 33***84 | Blind, Roller | 1 |
| 33***24 | Ring, Buffer | 1 |
B2-2-3 Cab
| 12***05 | Bolt, Closing | 1 |
| 12***01 | Stud | 1 |
| 12***07 | Knob, Interior | 1 |
B2-13-1 Visor, Sun
| 16***84 | G.A. | 1 |
| 25***01 | Blind, Sun Visor | 1 |
| 82***20 | Screw | 3 |
B2-5-1 Cab Frame, Mounting
| 12***02 | Plate, Compression | 4 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***2Z | Bolt, M16 X 120 | 2 |
B2-1-1 Cab Glazing, Clear & Bronze Tint
| 16***70 | Glass, Hinged Rear Window, Clear | 1 |
| 16***71 | Glass, Hinged Rear Window, Tinted | 1 |
| 16***72 | Stay, Window, C/W Release Pin | 1 |
B2-8-1 Suspension Unit, Seat
| 19***00 | Unit, Suspension Assembly | 1 |
| 19***01 | Unit, Suspension | 1 |
| 19***02 | Kit-Weight Adjuster | 1 |
B2-3-1 Cab, Roof Plate
| 13***07 | Bolt | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B2-7-3 Seat Belt, Static, Air Suspension Seat (40/910184)
| 40***74 | Belt, Safety, Seat; San 21308.40/91***74 Unpacked.40/20***00 Is, Packed.P Gamble/D Bickerton.A Kavanagh (Kab) | 1 |
B2-7-1 Seat Belt
| 13***2Z | Nut | 2 |
| 40***00 | Belt, Safety, Seat | 1 |
B2-7-2 Seat Belt, Retractable
| 40***00 | Kit-Seat Belt, With Inertia Reel, 42" Long; Buckle Strap Length 190mm. There Are No Servicable Parts For This Item, Kit-Seat Belt, With Inertia Reel, 42" Long | 1 |
B2-0-2 Cab Salvage Scheme
| 16***47 | Cab, G.A. (Clear) | 1 |
| 16***48 | Cab, Glazed/Black/Tinted, Plus Doors | 1 |
| 16***55 | G.A., Cab Glazing, Tinted | 1 |
B2-10-2 Guard Windscreen
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 14***2Z | Washer | 2 |
B2-1-2 Cab Glazing, Clear & Green Tint
| 16***70 | Glass, Hinged Rear Window, Clear | 1 |
| 16***72 | Stay, Window, C/W Release Pin | 1 |
| 16***28 | G.A. | 1 |
B2-9-7 Seat,Air Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 14***7Z | Washer, Spring | 6 |
B2-2-2 Cab
| 12***05 | Bolt, Closing | 1 |
| 12***01 | Stud | 1 |
| 12***07 | Knob, Interior | 1 |
B2-9-9 Seat, Air Suspension, Deluxe Cloth
| 33***38 | Kit, Up / Bump Stop | 1 |
| 33***41 | Kit, Ride Indicator | 1 |
| 33***51 | Kit, Seat, Foam; San23509.33***51 Ss To 40/21***05.P Gamble, 1/5/2007. | 1 |
B3-2-5 Booms,526 & 526s, Smooth Ride System
| 13***1Z | Screw, Hex Head, M8 X 12 | 4 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B3-4-3 Indicator,Boom Angle
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***6Z | Bolt, M8 X 70 | 1 |
| 13***1Z | Nut, M8 | 1 |
B3-5-1 Safety Strut
| 12***00 | Strap | 1 |
| 12***71 | Stop | 2 |
| 12***35 | Mounting, Strut | 2 |
B3-9-1 Boom Lever & Link
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 16***95 | G.A. | 1 |
B3-2-1 Booms,526 & 526s
| 13***1Z | Bolt | 1 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 4 |
| 13***3Z | Screw, M8 X 16 | 1 |
B3-4-1 Indicator, Boom Angle
| 14***4Z | Washer, Spring | 2 |
| 14***9Z | Washer | 1 |
| 15***00 | Plate, Back | 1 |
B3-3-1 Pads, Boom, Wear & Shims
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 6 |
| 13***8Z | Bolt, M10 X 30mm Tuf-Lok | 10 |
| 13***9Z | Bolt, M10x35 Long,Tuf-Lok | 4 |
B3-4-2 Indicator, Boom Angle
| 13***1Z | Bolt | 1 |
| 14***96 | Spacer | 1 |
| 16***87 | G.A., Boom Angle Indicator | 1 |
B3-7-2 Boom, Pivot Pin, Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 4 |
| 13***1Z | Bolt, M12x110 | 1 |
B3-1-1 Booms,520 & 520s
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-7-1 Boom, Pivot Pin, Location
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 8 |
| 13***1Z | Bolt, M12x110 | 2 |
B5-3-6 Decals, Revised Noise &, Cooling
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-5-5 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***75 | Hinge, Ring, Flip Charts | 2 |
B5-5-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***75 | Hinge, Ring, Flip Charts | 2 |
B5-3-10 Decals, Revised Noise, & Cooling
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-3-4 Decals, Revised Noise &, Cooling
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-10-1 Boom Restraint, Traffic
| 15***85 | Strap, Boom Restraint | 1 |
B5-3-1 Decals
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-2-1 Tool Kit
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
| 82***21 | Spanner, Adjustable, 10in. | 1 |
B5-3-20 Decals, Waist Band
| 81***32 | Decal, 120-4 | 1 |
| 81***33 | Decal, 120-5 | 1 |
| 81***34 | Decal, Industrial Special | 1 |
B5-3-3 Decals
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-8-1 Boom Marker Decals
| 16***46 | G.A. | 1 |
| 81***48 | Decal, Boom Extension, >0.5; San25288.81***48 Cwe To 81***97.25/9/07, P Gamble L06/239 | 1 |
| 81***49 | Decal, Boom Extension, 1>; San25288.Cwe To 81***98.P Gamble.25/9/07, Pi L06/239 | 1 |
B5-3-11 Decals, Revised Noise, & Cooling,Usa
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-1-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-5-6 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***75 | Hinge, Ring, Flip Charts | 2 |
B5-3-2 Decals, Revised Noise &, Cooling
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-2-5 Tool Kit
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
| 82***21 | Spanner, Adjustable, 10in. | 1 |
B5-3-5 Decals, Revised Noise, & Cooling
| 16***34 | G.A. | 1 |
| 16***46 | G.A. | 1 |
| 16***80 | G.A. | 1 |
B5-4-1 Paint
| 42***01 | Thinners, 5 Litres | 0 |
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
B6-1-1 Homolgation Parts, German
| 12***01 | Strap | 1 |
| 12***00 | Strap | 4 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 7 |
C Electrics-Machine, Cab & Engine
C1-13-1 Light Front
| 13***05 | Capscrew, M8 X 20 | 12 |
| 13***7Z | Capscrew, M8x25mm | 12 |
| 14***7Z | Washer, Spring | 8 |
C1-16-2 Alarm, Reverse
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 14***6Z | Washer, M6 | 6 |
| 71***14 | Plug, Male,8 Way, Deutsch | 1 |
C1-8-1 Indicator, Safe Load
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw, No 8x1/2" | 2 |
C1-10-1 Light, Rear
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 14***03 | Screw, Self Tapping | 2 |
C1-11-1 Light, Reversing
| 16***91 | Bracket, Mounting | 1 |
| 70***00 | Light, Reverse | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-4-10 Earthing, Engine/Chassis
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
C1-4-1 Battery & Components
| 10***00 | Clamp | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***1Z | Nut | 2 |
C1-1-6 Harness,526 & 526s, Powershift
| 70***00 | Switch, Proximity; Replaced By 70***75, See San 10336 | 1 |
| 70***00 | Push Button Black, No Microswitch | 1 |
| 70***75 | Switch, Proximity; & 70***27 | 1 |
C1-13-2 Light Front
| 70***00 | Light, Head/Indicator R/H, Rh Dip; San2584.Cwe By Mss To 70***56 & 33***99, Ref A Weir/M Orme. P Gamble 21/04***08, Light, Head/Indicator R/H, Rh Dip; San2584.Cwe By Mss To 70***56 & 33***99, Ref A Weir/M Orme. P Gamble 21/04***08, Row See Note 1. Fit/Func M/C 77***16 | 1 |
| 70***01 | Lens | 1 |
| 70***02 | Indicator, Lens; San 20165.Hella Say 70***02 & 70***01 Are, The Same Part.P Gamble 13/01***04 | 1 |
C1-21-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-20-1 Harness Cover, Electrical Bulkhead, Field Fix
| 16***65 | Cover, W.A. | 1 |
| 24***13 | Grommet, 32mm Dia | 1 |
| 92***00 | Seal, Edging | 1 |
C1-1-1 Harness, 520 Manual
| 15***01 | Seal, Cover | 1 |
| 70***00 | Switch, Proximity; Replaced By 70***75, See San 10336 | 1 |
| 70***00 | Push Button Black, No Microswitch | 1 |
C1-14-1 Light,Number Plate
| 16***31 | G.A. | 1 |
| 16***66 | Bracket, Mounting | 1 |
| 16***49 | Bracket, Mounting | 1 |
C1-2-1 Aircon, Electrics
| 16***38 | G.A. | 1 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 15 |
| 70***52 | Decal, Heater Fan Blower | 1 |
C1-18-1 Steer Sensor, Installation
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 5 |
| 16***80 | Guard, Steer Sensor | 2 |
C1-3-3 Instrument Cluster, 20kph, France
| 16***02 | Gearbox, Ga + Inst Cluster | 1 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C1-6-2 Fusible Link Box, Assy
| 16***38 | G.A. | 1 |
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***30 | Fuse, 30 Amp | 2 |
C1-8-3 Indicator, Safe Load, 520
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-1-10 Harness, Smooth Ride System, 526 Le & 526s Le
| 70***00 | Push Button Black, No Microswitch | 1 |
| 70***12 | Switch, Proximity | 1 |
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
C1-14-2 Light,Number Plate
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 1 |
| 33***06 | Bar, Pivot | 1 |
| 33***98 | Bracket, Number Plate W.A. | 1 |
C1-1-5 Harness, 526 & 526s
| 15***01 | Seal, Cover | 1 |
| 44***02 | Controller, Powershift, 4 Speed | 1 |
| 44***03 | Controller, Powershift, 3 Speed | 1 |
C1-21-2 Harness Connectors, Repair Ip67 Standard
| 72***03 | Pin, Female, 0.5-1.5mm, Signal | 0 |
| 72***04 | Pin, Female, 1.5-2.0mm, Signal | 0 |
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
C1-3-2 Instrument Cluster, German,Powershift
| 16***00 | Gearbox, Ga + Inst Cluster | 1 |
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
C1-1-7 Harness, 526 & 526s, Manual
| 70***00 | Switch, Proximity; Replaced By 70***75, See San 10336 | 1 |
| 70***00 | Push Button Black, No Microswitch | 1 |
| 70***75 | Switch, Proximity; & 70***27 | 1 |
C1-13-3 Light Front, Lh Dip,Clear
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
| 70***19 | Light, Head, Lh Side, Lh Dip | 1 |
C1-5-1 Trailer Electrics
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
C1-15-2 Horn,
| 12***90 | Bracket, Support, Left Hand | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
C1-15-1 Horn,Single Tone
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***1Z | Washer | 1 |
C1-8-2 Indicator, Safe Load
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-6-1 Fusible Link Box, Assembly
| 16***38 | G.A. | 1 |
| 71***00 | Box, Fuse Link, 5-Way; Replaced By 71***00, See San09823 | 1 |
| 71***30 | Fuse, 30 Amp | 2 |
C1-3-1 Instrument Cluster, 38 Kph, Powershift
| 70***01 | Gauge, Assembly Tachometer, Water Temp, Fuel | 1 |
| 70***02 | Gauge, Tachometer | 1 |
| 70***00 | Cluster, Instrument, 33 K.P.H. | 1 |
C1-8-5 Indicator, Safe Load, 520
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***0Z | Screw, M10 X 40, High Tensile | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-4-5 Isolator, Battery
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 4 |
C1-13-4 Light Front, Rh Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***56 | Light, Head Assembly, Right Hand | 1 |
C1-10-2 Light Combination, Rear
| 70***44 | Rear Light Cluster, Stop-Tail-Di-Ref-Rev; San 20167.70***44 S/S To 70***29.L03/274, P Gamble.14/01***04. | 1 |
| 70***45 | Rear Light Cluster, Stop-Tail-Di-Ref-Fog; San 20167.70***45 S/S To 70***30.L03/274, P Gamble.14/01***04. | 1 |
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
C1-8-4 Indicator, Safe Load
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***0Z | Screw, M10 X 40, High Tensile | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-16-1 Alarm,Reverse
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 14***6Z | Washer, M6 | 2 |
C2-15-1 Alternator Mountings, Tier 2 Emissions, Re Build
| 02***92 | Washer | 1 |
| 02***98 | Spacer | 1 |
| 02***53 | Lever, Alternator Adjusting | 1 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-4-3 Alternator Mountings, 85amp
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-4-4 Alternator, Air Deflector
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***1Z | Washer | 4 |
C2-15-2 Alternator Mountings, Tier 2 Emissions, Rg Build
| 02***92 | Washer | 1 |
| 02***98 | Spacer | 1 |
| 02***53 | Lever, Alternator Adjusting | 1 |
C2-11-2 Electrical Equipment, Tier 2 Emissions, Rg Builds
| 70***89 | Switch, Water Temperature | 1 |
| 70***90 | Switch, Engine Oil Pressure | 1 |
| 70***58 | Sensor, Vacuum - 80mbar | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-14-1 Alternator, Tier 2 Emissions, Re Build
| 71***52 | Alternator, 65a-12v | 1 |
C2-3-1 Alternator
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
C2-12-1 Circuit, Glow Plug, Tier 2, Re & Rg Build
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 71***69 | Fuse, 60amp Midival | 1 |
C2-4-2 Alternator Mountings
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-11-1 Electrical Equipment, Tier 2 Emissions, Re Builds
| 70***11 | Sensor, Vacuum - 70mbar | 1 |
| 70***89 | Switch, Water Temperature | 1 |
| 70***90 | Switch, Engine Oil Pressure | 1 |
C2-1-2 Electrical Equipment, Tier 1 Emissions, Ar & Ak Builds
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-14-2 Alternator, Tier 2 Emissions, 65amp, Rg Build
| 71***52 | Alternator, 65a-12v | 1 |
C2-14-3 Alternator, Tier 2 Emissions, 85 Amp, Rg Build
| 71***54 | Alternator, 85a-12v | 1 |
C2-13-2 Motor, Starter, Tier 2 Emissions, Rg Build
| 02***03 | Stud | 3 |
| 02***59 | Nut | 3 |
| 71***31 | Motor, Starter - 12volt | 1 |
C2-5-2 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-1-1 Electrical Equipment, Non Low Emissions, Aa & Ab Builds
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Temperature | 1 |
C2-3-3 Alternator, 12volt - 85amp
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
C2-13-1 Motor, Starter, Tier 2 Emissions, Re Build
| 02***03 | Stud | 3 |
| 02***59 | Nut | 3 |
| 71***31 | Motor, Starter - 12volt | 1 |
C2-3-2 Alternator, Sealed, A127m-55amp 12.Volt, Optional
| 70***00 | Tape, Self-Amalgamating | 0 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***00 | Alternator, 12volt-55amp Sealed | 1 |
C3-25-1 Non-Lighting Kit
| 12***15 | Cap | 2 |
| 13***9Z | Bolt, Paint Clearing | 2 |
| 16***95 | Gasket, Bracket, Light Mounting | 1 |
C3-19-1 Air Conditioning Kit
| 13***3Z | Screw, M6x16 | 1 |
| 14***1Z | Washer | 1 |
| 16***56 | G.A. | 1 |
C3-1-1 Motor,Wiper, Windscreen
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 16***88 | G.A. | 1 |
| 25***03 | Jet, Screen Washer | 1 |
C3-15-5 Light, Beacon, Hazard Warning
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C3-2-2 Motor,Wiper, Roof Window
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***03 | Cover | 1 |
C3-16-3 Switch, Column, Manual
| 13***3Z | Capscrew | 2 |
| 13***5Z | Screw, M5 X 20 | 2 |
| 14***1Z | Washer, Plain | 2 |
C3-9-1 Light, Working, Cab Mounted
| 16***94 | G.A. | 1 |
| 70***00 | Light, Auxiliary, Rh | 1 |
| 70***00 | Light, Auxiliary, Lh, Light, Auxiliary, Lh; See Note 1. Remove Blanking Grommet 83***20 | 1 |
C3-8-2 Ceiling Trim, & Radio Option
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 16***06 | Trim, Ceiling | 1 |
C3-17-1 Heater Assembly
| 16***71 | Heater, Assembly Unit, Heater, Assembly Unit; See Note 1. Heater Is Interchangeable With 16***16 From Serial No 27***00 Onwards By Removing Item 25 | 1 |
| 22***05 | Clip, Jubilee | 2 |
| 30***08 | Clip, Spring | 2 |
C3-4-1 Switches,Electrical
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 1 |
| 70***05 | Insert, Trailer Lights | 1 |
C3-6-1 Fixings, Cab
| 13***3Z | Nut | 8 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 24 |
C3-2-1 Motor, Wiper, Roof Window
| 14***02 | Screw | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***03 | Cover | 1 |
C3-19-4 Condensor, Installation
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C3-19-2 Condensor, Installation
| 13***3Z | Screw, M6x16 | 2 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-19-7 Receiver Drier
| 16***26 | Receiver, Drier | 1 |
| 70***26 | Switch, Binary | 1 |
| 72***65 | Harness, Binary Switch | 1 |
C3-15-1 Light, Beacon, Hazard Warning
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Yellow | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
C3-18-1 Fan, Cab Cooling, Optional
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 16***57 | G.A. | 1 |
C3-8-5 Moulding,Rear Lh
| 16***20 | Retainer, Bracket Moulding | 1 |
| 33***73 | Trim, Rear Quarter Lh, Radio Housing | 1 |
| 33***98 | Plate, Switch, Wa | 1 |
C3-16-2 Switch, Column, Powershift Gearbox
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
C3-7-1 Fuse Box & Relays
| 16***46 | Bracket, Relay/Fuse Mntg Plt | 1 |
| 16***48 | Bracket, Relay/Fuse Mntg Plt | 1 |
| 16***74 | Bracket, Relay/Fuse Mntg | 1 |
C3-13-1 Light, Interior, Cab
| 16***75 | G.A. | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-16-1 Switch, Column, Manual Gearbox
| 13***3Z | Capscrew | 4 |
| 14***1Z | Washer, Plain | 2 |
| 15***00 | Lock, Lever | 1 |
C3-14-1 Gauge, Inclinometer
| 70***00 | Gauge, Inclinometer/Level | 1 |
C3-20-1 Air Conditioning, Assembly
| 14***00 | Canister, Gas Charge, Refrigerant | 1 |
| 16***75 | G.A. | 1 |
| 16***32 | Knob, Control | 1 |
C3-40-1 Spool Switch, Smooth Ride System
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
| 14***7Z | Washer | 4 |
C3-8-1 Ceiling Trim, & Radio Option
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 15***84 | Channel, Pvc,Rear Wiper Harne, Ss | 1 |
C3-20-2 Heater Assembly, Air Conditioning
| 12***42 | Valve, Water, 5/8" X 5/8" | 1 |
| 22***05 | Clip, Jubilee | 2 |
| 30***00 | Unit, Air Con/Heater Assembly | 1 |
C3-5-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt, M10 X 16 | 1 |
C3-16-4 Switch, Column, Powershift Gearbox
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***5Z | Screw, M5 X 20 | 2 |
C3-19-3 Reciever Drier, Installation
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***3Z | Nut | 2 |
C3-19-6 Condensor, Installation
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***1Z | Bolt, M6 X 45 Lg | 6 |
| 13***1Z | Nut | 1 |
C3-4-10 Switches Electrical, Smooth Ride System
| 70***00 | Holder, Warning Light | 1 |
| 70***00 | Switch | 1 |
| 70***10 | Decal, Smooth Ride (Insert), Horizontal | 1 |
C3-3-1 Motor, Wiper, Rear Window
| 14***02 | Screw | 1 |
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
C3-4-5 Switches,Electrical
| 70***02 | Lens, Black, Insert | 1 |
| 70***00 | Holder, Warning Light | 2 |
| 70***05 | Insert, Trailer Lights | 1 |
C3-19-5 Condensor, Installation
| 13***2Z | Screw, M6 X 50 | 5 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***6Z | Washer, M6 | 2 |
C3-7-2 Fuse Box & Relays
| 16***75 | Plate, Relay/Fuse Mntg | 1 |
| 33***84 | Plate, Fuse Relay Mounting, Srs Powershift | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-6-5 Fixings, Cab
| 13***3Z | Nut | 8 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
| 14***1Z | Washer, 2 Ba | 24 |
D Controls-Machine, Engine & Steering
D1-9-3 Tilt/Lift Lever Lock
| 13***2Z | Nut, Thin M20 | 1 |
| 14***2Z | Washer, M20 | 1 |
| 16***47 | Boss, Locking | 1 |
D1-9-1 Lever Lock, Valve Controls
| 13***2Z | Nut, Thin M20 | 0 |
| 14***2Z | Washer, M20 | 0 |
| 16***47 | Boss, Locking | 0 |
D1-2-1 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***2Z | Nut | 2 |
D1-2-3 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***2Z | Nut | 2 |
D1-6-1 Control Levers, Valve With Full, Lever Locks
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 10 |
D1-6-4 Control Levers, 4 Spool/Solenoid Slc, 526-526s
| 12***59 | Ring, Tolerance | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
D1-7-1 Control Joysticks, 4 & 6 Button, 1st & 2nd Auxiliaries
| 70***84 | Insert | 1 |
| 70***00 | Switch, Rocker, Switch, Rocker; Note 1. To Improve Installation Of Stab Light | 1 |
| 70***18 | Lever, 6 Button Joystick, D Brown (Agric); San 12482. Superseded To 70***64, Pi L00/201, See Note 1. See Ti'S 5/181(D30/N.Am), Lever, 6 Button Joystick, D Brown (Agric); San 12482. Superseded To 70***64, Pi L00/201 | 1 |
D1-2-2 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***2Z | Nut | 2 |
D1-6-6 Control Levers, 4 Spool Manual,526
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 12***16 | Base, Control Knob | 1 |
D1-6-10 Control Levers, 4 Spool Manual,526, Smooth Ride System
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 12***16 | Base, Control Knob | 1 |
D1-4-2 Gear Lever
| 12***34 | Knob, Assembly | 1 |
| 13***0Z | Bolt | 1 |
| 13***2Z | Nut, Lock | 1 |
D1-6-7 Control Levers, Valve With Tilt Lock
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
D1-6-3 Control ,Levers, 4 Spool/Solenoid Slc, 526 & 526s
| 12***59 | Ring, Tolerance | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
D1-2-5 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 13***2Z | Nut | 1 |
D1-6-16 Control Levers, 4 Spool Manual, 526
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 12***35 | Knob, Assembly | 2 |
D1-6-15 Control Levers, Valve With Full, Lever Locks
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 12***35 | Knob, Assembly | 2 |
D1-6-11 Control Levers, 4 Spool/Solenoid,Slc, Smooth Ride System
| 12***59 | Ring, Tolerance | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
D1-3-1 Control Lever, Steer Selection
| 16***58 | Lever, & Cable Assembly | 1 |
| 99***85 | Handle, Assembly | 1 |
| 99***86 | Kit, Cable To Handle Assembly, Fixing | 1 |
D1-6-5 Control Levers, Valve With Full, Lever Locks
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 12***16 | Base, Control Knob | 1 |
D1-4-1 Gear Lever
| 12***34 | Knob, Assembly | 1 |
| 13***0Z | Bolt | 1 |
| 13***2Z | Nut, Lock | 1 |
D1-6-12 Control Levers, 4 Spool Manual,526, Smooth Ride System
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 12***35 | Knob, Assembly | 2 |
D1-4-3 Gear Lever, Acoustic
| 16***67 | Lever, Gear Plus Damper | 1 |
| 33***12 | Damper, Gearstick; San 21309.33***12 Is A Part Of 16***67.Ca, Nnot Be Seperate.P G., Note 1. Fits Only This Lever | 1 |
D1-2-4 Control, Parking Brake
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 13***2Z | Nut | 1 |
D1-6-2 Control Levers, 4 Spool,Manual,526
| 12***59 | Ring, Tolerance | 3 |
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
D1-3-2 Control Lever, Steer Selection
| 16***91 | Cable, & Steer Mode Valve | 1 |
| 99***85 | Handle, Assembly | 1 |
| 99***86 | Kit, Cable To Handle Assembly, Fixing | 1 |
D1-9-2 Tilt Lever Lock, Valve Controls
| 13***2Z | Nut, Thin M20 | 1 |
| 14***2Z | Washer, M20 | 1 |
| 16***47 | Boss, Locking | 1 |
D2-2-2 Control, Throttle, Tier 2 Emissions, Rg Build
| 13***5Z | Bolt | 3 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
D2-1-2 Control, Throttle, Tier 1 Emissions, Ar & Ak Build
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***2Z | Bolt | 2 |
D2-2-1 Control, Throttle, Tier 2 Emissions, Re Build
| 13***5Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
D2-2-4 Control, Throttle, Tier 2 Emissions, Rg Build
| 13***5Z | Bolt | 3 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
D2-2-3 Control, Throttle, Tier 2 Emissions, Re Build
| 13***5Z | Bolt | 4 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
D2-1-1 Control, Throttle, Non Low Emission, Aa & Ab Builds
| 12***63 | Bracket, Throttle Reaction | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***2Z | Bolt | 2 |
E Hydraulics & Air Including, Steering
E1-1-4 Circuit,Powershift, Neutral
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 4 |
| 22***11 | Clip, Jubilee | 8 |
| 23***06 | O Ring, 3/8"Bsp | 1 |
E1-5-1 Circuit, Tilt
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-6-1 Circuit, Lift & Extend
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 24***07 | O Ring | 4 |
E1-7-1 Circuit, Boom Auxiliary
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***08 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-3-2 Circuit, Ist & 2nd Aux, Boom End Options
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 14***11 | Seal, Bonded | 2 |
E1-2-1 Circuit,Neutral, Hot Climate
| 16***76 | Bracket, Oil Cooler Mounting | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 5 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-14-1 Circuit, Accumulator, Hydraulics
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 4 |
| 14***1Z | Washer, 2 Ba | 4 |
E1-10-4 Circuit, Trailer Brakes, (S.L.C.)
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-1-1 Circuit, Neutral
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-11-1 Circuit, Smooth Ride System, Installation
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***6Z | Bolt, M6x70 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 21 |
E1-3-1 Circuit, Ist & 2nd Aux, Boom End Options
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt | 2 |
| 14***11 | Seal, Bonded | 2 |
E1-6-5 Circuit, Lift & Extend
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 24***07 | O Ring | 4 |
E1-10-3 Circuit, Trailer Brakes, (Manual)
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-5-5 Circuit Tilt
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 16***80 | G.A. | 1 |
| 16***41 | G.A. | 1 |
E1-10-2 Circuit, Trailer Brakes,Slc
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-8-1 Circuit, Boom Auxiliary, With Tow Hitch
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 16***08 | G.A. | 1 |
E1-0-3 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-1-2 Circuit, Neutral, 526 & 526s
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-1-3 Circuit,Neutral, Manual
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 4 |
| 22***11 | Clip, Jubilee | 8 |
| 23***06 | O Ring, 3/8"Bsp | 2 |
E1-15-1 Circuit, Industrial Grapple
| 14***11 | Seal, Bonded | 6 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 6 |
| 16***03 | Adapter, Male/Male | 6 |
E1-10-1 Circuit, Trailer Brakes, (Manual)
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-4-1 Circuit, Boom Auxiliary, With Rear Hydraulic Tow Hitch
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***08 | G.A. | 1 |
E2-1-2 Pump,Main Hydraulic, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***7Z | Capscrew, M8x25mm | 4 |
E2-2-1 Pump,Main Hydraulic
| 02***35 | Gasket | 1 |
| 02***33 | Bolt | 5 |
| 02***37 | Bolt | 1 |
E2-2-2 Pump.Main Hydraulic
| 02***37 | Gasket | 1 |
| 02***33 | Bolt | 5 |
| 02***37 | Bolt | 1 |
E2-1-1 Pump,Main Hydraulic, Installation
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***7Z | Capscrew, M8x25mm | 4 |
| 13***6Z | Capscrew, M8 X 70mm Long | 1 |
E2-2-3 Pump,Main Hydraulic
| 20***02 | Valve, Load Sensing | 1 |
| 20***00 | Pump, Main,Hydraulic | 1 |
| 33***57 | Gear, Helical | 1 |
E3-2-2 Valve Components
| 25***01 | Valve, Section | 1 |
| 25***02 | Valve, Section | 1 |
| 25***03 | Spring, Centre Kit | 1 |
E3-1-4 Valve Assembly, Smooth Ride System, Manual
| 25***94 | Valve, Main Relief, 240bar 78 Lpm | 1 |
| 25***78 | Valve, Assembly 4 Spool, Smooth Ride System | 1 |
| 25***63 | Valve, With Microswitch | 1 |
E3-20-1 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 32***01 | Element, Air - Primary | 1 |
| 32***02 | Element, Air - Safety | 1 |
E3-7-1 Valve, Brake Charge
| 15***00 | Valve, Charge; Superseded By 92***88 D.Jackson 07/03/07, San23427 (James Coleman Request At Parker) | 1 |
| 15***01 | Kit-Seal, Including Filter; See Memo.24/7/06.Nla.Only Parker Can Service, The Valve.P Gamble.Ref J Coleman Parker. | 1 |
E3-1-1 Valve, Assembly
| 16***62 | Valve, Assembly | 1 |
| 25***00 | Valve, Assembly 4 Spool; Same As 25/97***00 But Supplier Issue, Raised Their Drg.See Pi L96/151 | 1 |
| 25***09 | Washer | 2 |
E3-20-5 Lubrication, & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 32***01 | Element, Air-Primary | 1 |
E3-1-5 Valve Assembly, Smooth Ride System, Single Lever Control
| 16***37 | Pipe, Inlet W.A. | 1 |
| 25***79 | Valve, 4 Spool Assembly Slc, Smooth Ride System | 1 |
| 25***06 | Assembly Kit 4 Spool, (3 Tie Rods) | 3 |
E3-2-4 Valve Components, Manual, Smooth Ride System
| 25***63 | Valve, With Microswitch | 1 |
| 25***64 | Valve, With Microswitch | 1 |
| 25***08 | Kit-Seal, Intersections, + Pilot Valve | 1 |
E3-1-3 Valve Assembly Slc
| 16***62 | Valve, Assembly | 1 |
| 16***37 | Pipe, Inlet W.A. | 1 |
| 25***81 | Handle, Linkage | 1 |
E3-1-2 Valve Assembly
| 16***62 | Valve, Assembly | 1 |
| 25***94 | Valve, Main Relief, 240bar 78 Lpm | 1 |
| 25***00 | Valve, Assembly 4 Spool | 1 |
E3-3-7 Valve Adapters, Smooth Ride System
| 14***08 | Seal, Washer | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
E3-2-3 Valve Components, Slc
| 25***16 | Kit, Seal | 1 |
| 25***23 | Solenoid, With Diode; Superseded To 71***06. Request By 500 Div, To Monitor Performance. See San 12507 | 1 |
| 25***01 | Valve, Section | 1 |
E3-4-1 Valve Steering
| 35***00 | Steering Ospc 160, With Shock Valve | 1 |
| 35***01 | Kit, Repair | 1 |
E3-6-1 Filter, Hydraulic
| 12***30 | Filter, Hydraulic Assembly; San 22599.Ss To 58***75.Ref A Wrixon,Hydac,, Pgamble,P Guest.22/8/2006. | 1 |
| 12***00 | Filter, Hydraulic Assembly, 5 Micron; Replaced By 27***00, See San07947 | 1 |
| 24***24 | O Ring | 1 |
E3-2-5 Valve Components, Slc, Smooth Ride System
| 25***16 | Kit, Seal | 1 |
| 25***01 | Valve, Section | 1 |
| 25***04 | Valve, Section | 1 |
E3-10-1 Steer Mode Valve, C/W Cable
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***2Z | Capscrew | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E3-3-1 Valve, Adapters
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
E3-2-1 Valve, Components
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 2 |
| 25***31 | Spacer | 1 |
E3-5-2 Valve, Diverter
| 25***00 | C/O Valve Auxiliary/Sway | 1 |
| 25***00 | Valve, Diverter, 12 Volt; Superceded 25/97***00 See Ti 5/080 | 0 |
| 25***01 | Coil, 12v | 1 |
E3-3-6 Valve, Adapters
| 14***08 | Seal, Washer | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
E3-3-5 Valve, Adapters
| 14***08 | Seal, Washer | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
E3-3-2 Valve Adapters
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
E3-11-1 Valve Conversion, Smooth Ride System
| 13***3Z | Nut | 2 |
| 13***4Z | Screw | 2 |
| 14***7Z | Washer | 4 |
E4-7-2 Ram,Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***09 | O Ring | 1 |
| 23***18 | O Ring, 120mm I.D. X 5mm Xs | 1 |
E4-1-5 Ram, Lift, Smooth Ride System
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
| 17***03 | Plug, Blanking | 1 |
E4-17-5 Ram,Tow Hitch
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
E4-6-1 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 23***08 | O Ring | 1 |
E4-4-1 Ram,Displacement
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
E4-17-1 Ram, Tow Hitch, Oleo
| 16***62 | Ram, Hydraulic Tow Hitch; See San 12977. Superseded To 55***18. | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-1-1 Ram,Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
E4-14-3 Multi-Shovel
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-17-4 Ram,Tow Hitch,L/Free, 526s & 526(Usa), 24" Wheels
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
E4-7-3 Ram,Tilt, Leak Free
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***09 | O Ring | 1 |
| 23***18 | O Ring, 120mm I.D. X 5mm Xs | 1 |
E4-16-1 Ram, Carriage, Sideshift
| 54***01 | Ram, Sideshift Carriage | 1 |
| 54***02 | Kit-Seal, Sideshift Carriage, Ram | 1 |
| 54***03 | Cylinder | 1 |
E4-8-2 Ram,Extension
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***85 | Shim, 0.5mm Thick | 0 |
E4-11-1 Ram, Tow Hitch
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-7-1 Ram, Tilt
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***40 | Pipe | 1 |
| 23***09 | O Ring | 1 |
E4-1-2 Ram, Lift
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
E4-15-2 Ram,Multi-Fork
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-12-2 Ram, Manure Fork
| 90***22 | Body, Cylinder | 1 |
| 90***23 | Rod, Piston | 1 |
| 90***24 | Piston | 1 |
E4-20-1 Ram,Lift, Smooth Ride System, Installation
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
E4-17-2 Ram,Tow Hitch Oleo, 526s & 526(Usa), 24" Wheels
| 16***08 | Ram, Hydraulic Tow Hitch | 1 |
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
E4-15-1 Ram,Manure Fork, With Push Off
| 98***01 | Ram, Assembly | 1 |
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
E4-13-1 Ram,Strimech,Heston, Bale Grab & Wrapped, Bale Clamp
| 54***10 | Nut | 1 |
| 54***12 | Piston | 1 |
| 54***14 | Bearing, Gland | 1 |
E4-4-2 Ram, Displacement
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
E4-8-1 Ram,Extension
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***85 | Shim, 0.5mm Thick | 0 |
E4-14-1 Ram, Multi Hitch
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
| 99***00 | Ram, Assembly, 76mm Cyl. Bore (3") | 1 |
E4-12-1 Ram,Log Grab,Manure, Silage Fork,Fixed, & Sliding & Flat 8 Bale Grab
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-18-1 Ram, Box Tipper
| 98***30 | Cylinder, Hydraulic | 1 |
| 98***45 | Locknut | 1 |
| 98***46 | Seal, Piston Head; Will Be Provided As A Part Of Seal Kit, 98***54.See San 09107.Ref L Collins/Strimec | 1 |
E4-17-3 Ram,Tow Hitch, 526s & 526(Usa), 24" Wheels
| 23***06 | O Ring | 1 |
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
F Axles, Wheels & Transmission
F1-6-6 Dropbox-Helical Gear, Permanent 4wd, Axle Ratio 16.16
| 10***03 | Brake, Disc; S/S To 10/90***94. M Rogers Request San 14310., 12/5/2003 Supplier Request. Pg. | 2 |
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
F1-6-8 Dropbox(520)4wd Lsd
| 10***03 | Brake, Disc; S/S To 10/90***94. M Rogers Request San 14310., 12/5/2003 Supplier Request. Pg. | 2 |
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
F1-1-2 Axle,3 Piece, Sd 70, Pad Mntd,Lsd, Ratio 12.33,Axle 453/27500
| 13***4Z | Bolt | 4 |
| 13***5Z | Bolt | 1 |
| 13***16 | Bolt, M16x70l | 28 |
F1-5-3 Differential Assy, Components
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***00 | Kit-Gear, Differential | 1 |
F1-2-1 Differential Assy, Pad Mntd
| 13***07 | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F1-2-8 Differential Assy, Pad Mntd
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F1-2-3 Axle Drive Head, Steer Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***02 | Sleeve, Splined | 1 |
| 44***00 | Differential, Assembly | 1 |
F1-1-5 Axle, Assembly, Front 520 & 520s
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***1Z | Nut, M24 | 4 |
| 14***4Z | Washer | 8 |
F1-3-2 Hub & Components, Steering Axle 520
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
F1-1-3 Axle,3 Piece,Sd 70, Pad Mntd,Ratio 16.16, 453/28500
| 13***4Z | Bolt | 4 |
| 13***5Z | Bolt | 1 |
| 13***16 | Bolt, M16x70l | 28 |
F1-6-5 Dropbox-Helical Gear, Permanent 4wd, For 12.33 Ratio Axle
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-5-1 Differential Assy, Components
| 13***18 | Bolt | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F1-6-1 Dropbox (Spur Gears), Permanent 4wd, For 12.33 Ratio Axle
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-2-5 Differential Assy, Pad Mntd
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F1-8-1 Ram Steering, Front Axle 520 4ws
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-1-1 Axle,3 Piece,Sd 70, Pad Mnted,Germany, Ratio 12.33,453/28100
| 13***4Z | Bolt | 4 |
| 13***5Z | Bolt | 1 |
| 13***16 | Bolt, M16x70l | 28 |
F1-6-2 Dropbox (Spur Gear), Permanent 4wd, For Axle Ratio 16.16
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-6-9 Dropbox-Helical Gear, Permanent 4wd, For Axle Ratio 16.16
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 41***00 | Sealant | 1 |
F1-3-1 Hub & Components
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F1-2-2 Differential Assy, Pad Mntd
| 13***07 | Capscrew | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F1-6-3 Dropbox (520) 4wd, Spur Gears
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-8-2 Ram Steering, Front Axle 526,526s
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-2-4 Axle Drive Head, Steering Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***02 | Sleeve, Splined | 1 |
| 44***00 | Differential, Lsd | 1 |
F1-6-4 Dropbox (520), 4wd Lsd,Spur Gears
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 8 |
F1-30-1 Replacement Hub Kits
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
| 22***45 | Circlip | 2 |
F1-7-2 Knuckle,Steering &, Hub, Driveshaft
| 13***09 | Screw | 16 |
| 41***02 | Sealant, Locking | 1 |
| 44***02 | Trunnion; Replaced By 45***01 | 4 |
F1-5-2 Differential, Components
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F1-1-6 Axle,3 Piece,Sd70,Ls, Pad Mntd,Ratio 16.16
| 13***4Z | Bolt | 4 |
| 13***5Z | Bolt | 1 |
| 13***16 | Bolt, M16x70l | 28 |
F1-6-7 Dropbox-Helical, Permanent 4wd, 12.33 Ratio
| 13***09 | Bolt | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 10 |
| 13***7Z | Bolt, Coated | 7 |
F1-1-4 Axle, 3 Piece, Sd 70, Pad Mntd,Lsd, Ratio 16.16
| 13***4Z | Bolt | 4 |
| 13***5Z | Bolt | 1 |
| 13***16 | Bolt, M16x70l | 28 |
F1-9-1 Shaft,Drive,520
| 91***07 | Kit-Spider | 2 |
| 91***02 | Shaft, Hub Side; 91***01 + 82***94 | 1 |
| 91***02 | Yoke, Double | 1 |
F1-7-1 Knuckle Steering &, Hub, Driveshft
| 13***09 | Screw | 16 |
| 41***02 | Sealant, Locking | 1 |
| 44***02 | Trunnion; Replaced By 45***01 | 4 |
F2-5-2 Ram Steering, Rear Axle,520 4ws
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-4-1 Shaft Drive
| 91***07 | Kit-Spider | 2 |
| 91***01 | Shaft, Diff Side | 1 |
| 91***02 | Yoke, Double | 1 |
F2-2-3 Differential Assy, 526
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F2-3-1 Hub & Components, Non-Braked Axle
| 10***01 | Nut | 20 |
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-30-1 Replacement Hub Kits
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***20 | Circlip | 4 |
| 22***45 | Circlip | 2 |
F2-6-1 Shaft Drive
| 91***01 | Driveshaft | 1 |
| 91***46 | Shaft, Hub | 1 |
| 91***48 | Shaft, Diff Side | 1 |
F2-2-2 Differential Assy, 520
| 13***8Z | Bolt, M8x80mm Long | 8 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F2-10-1 Axle Noise Mat
| 12***62 | Washer, Spreader | 9 |
| 82***77 | Nut, Vibration Proof | 9 |
| 90***19 | Mat, Rear Axle Sheet, Rubber | 1 |
F2-5-1 Ram Steering, Rear Axle,526 & 526s
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F2-1-2 Axle Assembly, Rear,520, Braked
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-1-1 Axle Assembly, Rear 526 & 526s
| 10***01 | Nut | 10 |
| 13***1Z | Bolt, M20 X 110mm | 6 |
| 13***3Z | Nut, M20 | 6 |
F2-2-1 Differential Assy, 526
| 13***8Z | Bolt, M8x80mm Long | 8 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-3-2 Hub & Components, Braked Axle
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 22***82 | Circlip | 2 |
F2-6-2 Shaft,Drive
| 91***05 | Nipple | 1 |
| 91***07 | Kit-Spider | 2 |
| 91***02 | Yoke, Double | 1 |
F3-3-5 Wheels & Tires, 526(24")
| 10***01 | Nut | 20 |
| 15***01 | Valve | 1 |
| 16***66 | Wheel, & Tyre Assembly.Traction, 17.5lr X 24 | 4 |
F3-6-2 Propshafts
| 11***25 | Strap | 6 |
| 16***76 | G.A., Driveshaft Kit, 526-55 Ext/Chassis | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F3-6-1 Propshafts
| 11***25 | Strap | 6 |
| 16***07 | G.A. | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F3-1-20 Drive Shaft, Universal, Joints (Spider Kits)
| 91***02 | Kit-Spider | 1 |
| 91***03 | Kit-Spider, 82mm Over Caps, 27mm Dia. | 1 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 1 |
F3-3-1 Wheels & Tyres, 526 (20")
| 10***01 | Nut | 20 |
| 15***01 | Valve | 1 |
| 16***08 | Wheel, & Tyre, Michelin, 405/70 R20 M27 | 4 |
F3-1-1 Wheels & Tyres
| 15***01 | Valve | 1 |
| 16***16 | Wheel, & Tyre. Michelin, 375/75 R20 Xm27 | 4 |
| 16***17 | Wheel, & Tyre. Continental, 14.5-20 10ply Mpt | 4 |
F3-3-2 Wheels & Tyres, 526s(24")
| 10***01 | Nut | 20 |
| 15***01 | Valve | 1 |
| 16***66 | Wheel, & Tyre Assembly.Traction, 17.5lr X 24 | 4 |
F5-2-1 Transmission, Jcb Syncro Shuttle, Components
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F5-1-2 Transmission, Jcb Syncro Shuttle
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
F5-6-1 Transmission, Mounting
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***9Z | Bolt, M12x90mm | 2 |
F5-3-1 Clutch, Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-4-1 Gear Change
| 44***21 | Gaiter, Gear Change | 1 |
| 44***31 | Roller, Baulk | 1 |
| 44***00 | Lever, Assembly | 1 |
F5-7-2 Cooler, Oil, & Installation
| 14***14 | Washer, Seal | 1 |
| 30***00 | Cooler, Transmission Oil | 1 |
| 64***19 | Hose, 5/8" Bore, 1500mm Long; Techweb 5076 | 1 |
F5-1-1 Transmission, Jcb Syncro Shuttle
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
F5-7-1 Cooler, Oil, & Installation
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 1 |
| 16***60 | G.A. | 1 |
F5-5-1 Torque Converter, Drive Plate Kit, & Transmission
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F6-8-5 Electronic, Control Unit
| 13***5Z | Screw, M5 X 20 | 4 |
| 13***2Z | Capscrew | 4 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 4 |
F6-1-1 Transmisission, Powershift, External Components
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 1 |
F6-2-5 Mainshaft Components, Powershift Trans
| 22***15 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
| 44***05 | Plate, Friction | 9 |
F6-2-1 Layshaft Components, Powershift Trans
| 13***7Z | Bolt, Coated | 4 |
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
F6-1-2 Transmission, Powershift, External Components
| 13***9Z | Screw, M10x35mm | 11 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 1 |
F6-2-2 Layshaft Componemnts, P/Shift Transmission
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-3-1 Clutch Reverse, P/Shift Transmission
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-6-1 Transmission, Mounting, Powershift
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***9Z | Bolt, M12x90mm | 2 |
F6-3-2 Clutch Reverse, P/Shift Transmission
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-8-2 Switch,Solenoid, P/Shift Transmission
| 13***8Z | Screw, M8x30 | 14 |
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Capscrew, M5 X 30 | 12 |
F6-2-6 Mainshaft Components, P/Shift Transmission
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-4-2 Clutch Input, P/Shift Transmission
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-7-1 Pipework, Powershift, Transmission
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***03 | Adapter | 4 |
| 44***00 | Pipe, Short, Layshaft Feed | 1 |
F6-4-1 Clutch Input, P/Shift Transmission
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***0Z | Bolt | 4 |
| 20***00 | Pump, Oil, (Rear Seal Not Supplied); Replaced By 20/91***00 | 1 |
F6-5-1 Torque Convertor, Drive Plate Kit &, Transmission
| 02***70 | Dowel | 2 |
| 04***00 | Converter, 2 Purple & 1 White, Spot. 2.2:1 Ratio | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F6-8-1 Switch,Solenoid, Powershift Trans
| 13***8Z | Bolt | 14 |
| 13***1Z | Bolt, M8 X 45; Replaced By 13***1z, See San05502 | 2 |
| 13***0Z | Bolt | 1 |
G Brakes
G1-10-7 Brakes Trailer, Manual
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
G1-14-1 Valve Brake, Trailer
| 25***02 | Kit-Seal | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Repair | 1 |
G1-6-1 Brake Components
G1-8-2 Brake Pedal, Master Cylinder
| 13***1Z | Screw | 2 |
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***1Z | Bolt | 2 |
G1-10-2 Brakes Trailer, Manual
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
G1-2-1 Brake Caliper, Parking
| 15***01 | Kit-Brake Pad; Replaced By 15/92***03 | 1 |
| 15***03 | Kit, Spring | 1 |
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
G1-10-6 Brakes Trailer, Single Lever Control
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
G1-10-8 Brakes Trailer, Single Lever Control
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
G1-8-3 Brake Pedal, Master Cyclinder
| 13***1Z | Screw | 2 |
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***9Z | Screw, M10x35mm | 2 |
G1-7-1 Brake System, Chassis 4ws, 526s & 526
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Nut | 4 |
G1-5-1 Brakes Axle
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***13 | Pin, Reaction | 6 |
G1-4-1 Brake System, Chassis 4ws 520
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Nut | 4 |
G1-10-5 Brakes Trailer, Single Lever Control
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
G1-10-1 Brakes Trailer, Manual
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
G1-8-1 Brake Pedal, Master Cylinder
| 13***4Z | Bolt | 1 |
| 13***8Z | Bolt, M10 X 30 | 6 |
| 13***1Z | Bolt | 1 |
G1-14-2 Valve Brake, Trailer
| 25***44 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Repair | 1 |
| 99***88 | Kit-Seal | 1 |
G1-1-1 Brake,Parking, Installation
| 13***8Z | Bolt, M16 X 80 | 2 |
| 14***1Z | Washer, M16 Plain | 1 |
| 15***86 | Caliper, Parkbrake, Hayes; San 20751.Superseded By 15/92***72.Pi 449/178, P Gamble.07/10***04 | 1 |
G1-3-2 Brake System, 526 & 526s
| 14***4Z | Washer | 2 |
| 15***00 | Nut | 2 |
| 15***00 | Cylinder, Master; 15/91***00 Replaced By 15/91***00 & 33***84., See San 10447 & Pi L99/83. | 1 |
H Steering
H1-4-1 Hose & Pipework, Steering 4ws
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
H1-4-3 Hose & Pipework, Steering 4ws
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 14***11 | Seal, Bonded | 2 |
H1-1-2 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
H1-1-1 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
H1-1-4 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***1Z | Washer, M16 Plain | 1 |
H1-4-2 Hose & Pipework
| 13***3Z | Nut | 1 |
| 13***12 | Capscrew | 2 |
| 14***1Z | Washer, Spring | 1 |
H1-1-3 Steering Column
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
N Engines, 1004-4, Aa & Ab Builds
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N1-1-4 Engine, Complete, Ab Build, 106bhp
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 106bhp | 1 |
N1-1-3 Engine, Complete, Ab Build, 96bhp
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 96bhp | 1 |
N1-3-1 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***00 | Bracket, Engine Mounting, Left Hand | 1 |
N1-2-2 Engine, Short, Ab Build
| 02***46 | Engine, Short, 1004-4t, Turbocharged | 1 |
N1-1-2 Engine, Complete, Ab Build, 90bhp
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 90bhp | 1 |
N1-6-1 Timing Case, Camshaft & Gears, Aa & Ab Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
N1-5-2 Fans, Pulleys, & Fan Belt, Ab Build
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***81 | Belt, Fan, Pair | 1 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete, 1004-4, Naturally Aspirated | 1 |
N1-7-1 Flywheel, Aa & Ab Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
N1-5-1 Fans, Pulleys, & Fan Belt, Aa Build
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
N1-3-2 Block Assembly, Ab Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-3-3 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
N1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ab Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N2-3-1 Rocker Cover, Aa & Ab Builds
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 3 |
N2-4-1 Lifting Plates, Engine, Aa & Ab Builds
| 02***13 | Plate, Lifting | 1 |
| 02***31 | Plate, Lifting | 1 |
| 02***36 | Plate, Lifting | 1 |
N2-1-2 Cylinder Head, Ab Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Aa & Ab Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N3-2-2 Manifold, Exhaust, Ab Build
| 02***50 | Gasket | 2 |
| 02***22 | Gasket | 1 |
| 02***76 | Manifold, Exhaust | 1 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***03 | Stud | 3 |
N3-4-4 Silencer, Ab Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
N3-3-2 Filter, Air, Ab Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***69 | Spacer | 1 |
N3-1-2 Manifold, Induction, Ab Build
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
| 02***09 | Gasket | 1 |
N3-3-1 Filter, Air, Aa Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***69 | Spacer | 1 |
N3-4-1 Silencer, Aa Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 2 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N3-4-2 Silencer, Ab Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 5 |
N4-4-2 Radiator & Hoses, Hot Climate
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-4-3 Radiator & Hoses, Ab Build
| 12***01 | Strap | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
N4-3-1 Radiator, Fittings & Mountings, Aa Build
| 12***81 | Cowling, Fan | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 12 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
N4-1-1 Pump, Water, Aa & Ab Builds
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
| 02***84 | Seal | 1 |
N4-3-2 Radiator, Fittings & Mountings, Ab Build
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 12 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
| 16***59 | Frame, Wa.Anti-Circ Seal | 1 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa & Ab Builds
| 02***95 | Plug, Taper | 1 |
| 02***92 | Thermostat | 1 |
| 02***46 | Plug | 1 |
N4-4-1 Radiator & Hoses
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N5-4-1 Filter, Oil, Aa Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
| 02***96 | Gasket | 2 |
N5-2-2 Pump, Oil, & Relief Valve, Ab Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N5-3-1 Piston Cooling Jets, Ab Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
N5-1-1 Sump, Oil, Aa & Ab Builds
| 02***26 | Spacer | 1 |
| 02***73 | Gasket | 1 |
| 02***82 | Plug, Oil Drain | 2 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N5-5-2 Cooler, Oil, Filter & Pipework, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***13 | Hose, Elbow | 1 |
| 02***30 | Connector | 1 |
N6-3-1 Fuel Pipes, Injection Pump, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N6-1-2 Pump, Fuel Injection, Ab Build 90bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-2-5 Injectors, Fuel, & Injection Pipes, Ab Build, 106bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 1 |
N6-7-1 Filter, Fuel, Aa & Ab Builds
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-2-4 Injectors, Fuel, & Injection Pipes, Ab Build, 96bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 1 |
N6-3-2 Fuel Pipes, Injection Pump, Ab Build, 90bhp
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N6-1-4 Pump, Fuel Injection, Ab Build, 106bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-8-1 Pump, Fuel Lift, Aa & Ab Builds
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-6-1 Filter, Fuel Sediment, Aa & Ab Builds
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***06 | Filter, Swirl Cone | 1 |
N6-5-1 Fuel Heater, & Fuel Feed Pipe, Aa Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
N6-5-2 Fuel Heater, & Fuel Feed Pipe, Ab Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
N6-2-3 Injectors, Fuel, & Injection Pipes, Ab Build, 90bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-2-1 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-3-4 Fuel Pipes, Injection Pump, Ab Build, 106bhp
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 4 |
N6-2-2 Injectors, Fuel, & Injection Pipes, Alternative, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-1-3 Pump, Fuel Injection, Ab Build 96bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-3-3 Fuel Pipes, Injection Pump, Ab Build, 96bhp
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 4 |
N7-7-2 Block Heater, Heaterless Build
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
N7-6-1 Compressor, Air Conditioning
| 99***00 | Compressor, Air Conditioning, 12volt | 1 |
| 99***01 | Clutch, Assembly, C/W Coil, 12volt | 1 |
N7-7-3 Block Heater, Heater Build
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
N7-5-2 Compressor 12.Volt, Air Conditioning
| 01***04 | Belt, Drive | 1 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
N7-1-5 Turbocharger, Ab Build, 96bhp
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***78 | Housing, Centre Assembly | 1 |
N7-1-4 Turbocharger, Ab Build, 90bhp
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***60 | Turbocharger | 1 |
N7-5-1 Compressor 12.Volt, Air Conditioning
| 01***04 | Belt, Drive | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***8Z | Bolt, M8x80mm Long | 1 |
N7-1-2 Turbocharger, Ab Build, 96bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-1-1 Turbocharger, Ab Build, 90bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-7-1 Block Heater, Freeze Plug Type, Optional, Ar Build
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
N7-1-6 Turbocharger, Ab Build, 106bhp
| 02***76 | Kit-Repair, Turbocharger | 1 |
| 02***22 | Gasket | 1 |
| 02***60 | Turbocharger | 1 |
N7-2-1 Turbocharger, Pipework & Mounting, Ab Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***75 | Gasket | 1 |
N7-6-2 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
N7-1-3 Turbocharger, Ab Build, 106bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N8-1-1 Gasket Sets, Aa & Ab Build
| 02***77 | Kit-Gasket, Bottom | 1 |
| 02***41 | Kit-Gasket, Top | 1 |
N8-2-2 Kit, Engine Overhaul, Ab Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
N8-2-1 Kit, Engine Overhaul, Aa Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
P Engines, 1004-4 Tier 1 Emissio, Ns Ar & Ak Builds
P1-1-1 Engine, Complete, Ar Build
| 01***00 | Engine, Complete 1004-4, Nat/Aspirated, 80bhp | 1 |
| 01***78 | Engine, Complete 1004-4, Nat/Aspirated, 80bhp | 1 |
P1-6-2 Timing Case, Camshaft & Gears, Ak Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-5-1 Fans, Pulleys, & Fan Belt, Ar Build
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
P1-1-4 Engine, Complete, C/W 65amp Alternator, Ak Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged 100bhp | 1 |
| 01***79 | Engine, Complete 1004-4t, Turbocharged. 100bhp | 1 |
P1-5-5 Fans, Pulleys, & Fan Belt, Ak Build
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***73 | Belt, Drive - Pair, L=1350mm; Lh Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 02/10***06., Belt, Drive - Pair, L=1350mm | 1 |
P1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-5-3 Fans, Pulleys, & Fan Belt, Air Conditioning, Ar Builds
| 01***04 | Belt, Drive | 1 |
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 3 |
P1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***00 | Bracket, Engine Mounting, Left Hand | 1 |
P1-2-2 Engine, Short, Ak Builds
| 02***60 | Engine, Short, Turbo | 1 |
P1-3-4 Block Assembly, Ak Builds
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-1-2 Engine, Complete, C/W 85amp Alternator, Ak Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 100bhp | 1 |
| 01***77 | Engine, Complete 1004-4t, Turbocharged, 100bhp | 1 |
P1-5-2 Fans, Pulleys, & Fan Belt, Ak Build
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***27 | Belt, Fan, Pair | 1 |
P1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-5-6 Fans, Pulleys, & Fan Belt, Air Conditioning, Ak Builds
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***73 | Belt, Drive - Pair, L=1350mm; Lh Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 02/10***06., Belt, Drive - Pair, L=1350mm | 1 |
P1-3-1 Block Assembly, Ar Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-6-1 Timing Case, Camshaft & Gears, Ar Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-7-1 Flywheel & Housing
| 02***78 | Gear, Starter Ring | 2 |
| 02***37 | Flywheel, Assembly | 1 |
| 02***25 | Washer | 6 |
P1-5-4 Fans, Pulleys, & Fan Belt, Air Conditioning, Ak Builds
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***27 | Belt, Fan, Pair | 1 |
P1-2-4 Engine, Long, Ak Build
| 02***36 | Engine, Short | 1 |
P1-3-2 Block Assembly, Ak Builds
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-2-1 Engine, Short, Ar Build
| 02***00 | Engine, Short, Nat/Asp | 1 |
| 02***82 | Engine, Short | 1 |
P1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 1 |
| 02***01 | Bush, Camshaft | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 0 |
P1-2-3 Engine, Long, Ar Build
| 02***41 | Motor, Long | 1 |
P1-3-3 Block Assembly, Ar Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-4-3 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P2-3-1 Rocker Cover, Ar & Ak Builds
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
| 02***59 | Bracket | 1 |
P2-4-2 Lifting Plates, Engine, Ak Build
| 02***31 | Plate, Lifting | 1 |
| 02***36 | Plate, Lifting | 1 |
| 02***71 | Bolt | 2 |
P2-2-1 Rocker Assembly, Push Rods & Tappets, Ar Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-2-3 Rocker Assembly, Push Rods & Tappets, Ar Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P2-1-1 Cylinder Head, Ar Build
| 02***21 | Bolt, Cylinder Head | 4 |
| 02***48 | Plug | 1 |
| 02***96 | Plug, Core, D=32mm | 1 |
P2-3-2 Rocker Cover, Ar & Ak Builds
| 02***69 | Bush | 3 |
| 02***59 | Bracket | 1 |
| 02***19 | Nut | 3 |
P2-4-1 Lifting Plates, Engine, Ar Build
| 02***31 | Plate, Lifting | 1 |
| 02***57 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
P2-1-2 Cylinder Head, Ak Build
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P2-2-2 Rocker Assembly, Push Rods & Tappets, Ak Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P3-3-3 Filter, Pre-Cleaner, Optional
| 32***00 | Kit-Pre-Cleaner | 1 |
| 32***01 | Ring, Rubber Insert | 1 |
| 32***02 | Clamp, T Bolt Band | 1 |
P3-4-5 Exhaust System, Naturally Aspirated
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 10 |
P3-4-4 Exhaust System, Turbo
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
P3-1-2 Manifold, Induction, Ak Build
| 02***89 | Hose, Induction | 1 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***53 | Manifold, Air Induction | 1 |
P3-3-4 Filter, Air, Ar Build
| 13***0Z | Bolt, M8x40 | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Nut, M8 | 2 |
P3-2-2 Manifold, Exhaust, Ak Builds
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***85 | Manifold, Exhaust | 1 |
P3-3-1 Filter, Air, Ar Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 22***14 | Clip, Jubilee; Replaces Kej0337 | 3 |
P3-2-1 Manifold, Exhaust, Ar Build
| 02***75 | Elbow, Exhaust | 1 |
| 02***36 | Gasket, Ind/Exhst Manifold | 1 |
| 02***37 | Manifold, Exhaust | 1 |
P3-4-3 Exhaust System, Naturally Aspirated
| 13***3Z | Nut, Lock, M10 | 3 |
| 13***8Z | Capscrew | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
P3-4-2 Exhaust System, Turbo
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
P3-4-8 Exhaust System, Turbo
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
P3-3-2 Filter, Air, Ak Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 22***15 | Clip, Jubilee | 2 |
P3-4-7 Exhaust System, Naturally Aspirated
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***0Z | Bolt, M10 X 40 | 1 |
P3-1-1 Manifold, Induction, Ar Build
| 02***10 | Plug | 1 |
| 02***36 | Gasket | 2 |
| 02***39 | Plate | 1 |
P3-4-6 Exhaust System, Turbo
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
P3-3-5 Filter, Air, Ak Build
| 13***0Z | Bolt, M8x40 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***1Z | Nut, M8 | 2 |
P3-4-1 Exhaust System, Naturally Aspirated
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***3Z | Nut, Lock, M10 | 5 |
P4-3-3 Radiator, Fittings & Mountings
| 12***62 | Washer, Spreader | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
P4-4-3 Radiator & Hoses
| 12***01 | Strap | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
P4-3-2 Radiator, Fittings & Mountings
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 12 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
| 16***59 | Frame, Wa.Anti-Circ Seal | 1 |
P4-4-2 Radiator & Hoses
| 12***01 | Strap | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
P4-2-1 Thermostat, Housing, Inlet & Outlet, Ar & Ak Builds
| 02***95 | Plug, Taper | 1 |
| 02***46 | Plug | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
P4-2-2 Thermostat, Housing, Inlet & Outlet, Ar & Ak Builds
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
P4-1-1 Pump, Water, Ar & Ak Builds
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***40 | Pump, Water | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
P5-5-2 Cooler, Oil, Filter & Pipework, Ak Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***30 | Connector | 1 |
| 02***31 | Olive | 1 |
P5-2-2 Pump, Oil, & Relief Valve, Ak Builds
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-3-1 Piston Cooling Jets, Ar & Ak Builds
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P5-4-1 Filter, Oil, Ar Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
| 02***84 | Gasket | 2 |
P5-2-1 Pump, Oil, & Relief Valve, Ar Build
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-1-1 Sump, Oil, & Fittings, Ar & Ak Builds
| 02***26 | Spacer | 1 |
| 02***73 | Gasket | 1 |
| 02***82 | Plug, Oil Drain | 2 |
P5-5-1 Cooler, Oil, Filter & Pipework, Ar Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***05 | Seal | 1 |
| 02***84 | Gasket | 3 |
P6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 1 |
| 02***64 | Olive | 2 |
P6-2-2 Injectors, Fuel, & Injection Pipes, Ak Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-1-2 Pump, Fuel Injection, Ak Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***63 | Bracket, Support | 1 |
P6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
P6-5-1 Fuel Heater, & Fuel Feed Pipe, Ar Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
P6-8-2 Pump, Fuel Lift
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
| 17***00 | Pump, Fuel Lift | 1 |
P6-6-4 Filter, Fuel Sediment
| 32***71 | Element, Fuel Sediment Filter | 1 |
| 32***73 | Plug, Drain Assembly | 1 |
| 32***81 | Screw, Bleed | 1 |
P6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P6-3-2 Fuel Pipes, Injection Pump, Ak Build, 100bhp
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***18 | Nut | 1 |
P6-2-1 Injectors, Fuel, & Injection Pipes, Ar Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-1-1 Pump, Fuel Injection, Ar Build
| 02***63 | Bracket, Support | 3 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
P6-3-1 Fuel Pipes, Injection Pump, Ar Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***64 | Olive | 4 |
P6-5-2 Fuel Heater, & Fuel Feed Pipe, Ak Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 2 |
P6-6-2 Filter, Fuel Sediment
| 32***07 | Washer, Locking | 1 |
| 32***08 | Seal | 1 |
| 32***09 | Bowl, Assembly | 1 |
P6-6-3 Filter, Fuel Sediment
| 32***66 | Filter, Fuel Sediment | 1 |
| 32***70 | Head, Filter | 1 |
| 32***71 | Element, Fuel Sediment Filter | 1 |
P7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
P7-1-1 Turbocharger, Ak Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***71 | Housing, Compressor | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
P7-7-2 Block Heater, Heaterless Build
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
P7-7-3 Block Heater, Heater Build
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
P7-7-1 Block Heater, Freeze Plug Type, Optional
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
P7-2-1 Turbocharger, Pipework & Mounting, Ak Builds
| 02***85 | Clip | 1 |
| 02***75 | Gasket | 1 |
| 02***16 | Adapter, Union | 1 |
P7-1-2 Turbocharger, Ak Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
| 02***74 | Kit-Sundry Parts | 1 |
P7-5-2 Compressor 12.Volt, Air Conditioning
| 01***04 | Belt, Drive | 1 |
| 02***81 | Belt, Fan, Pair | 1 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
P7-5-1 Compressor 12.Volt, Air Conditioning
| 01***04 | Belt, Drive | 1 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
P8-2-1 Gasket Set, Bottom, Ar & Ak Builds
| 02***31 | Kit-Gasket, Bottom | 1 |
P8-1-2 Gasket Set, Top, Ak Builds
| 02***49 | Kit-Gasket, Top | 1 |
P8-1-1 Gasket Set, Top, Ar Build
| 02***50 | Kit-Gasket, Top | 1 |
R Engines, 1104c-44 Tier 2 Emiss, Ions Re & Rg Builds
R1-2-2 Engine Short, Rg Build
| 02***00 | Engine, Short | 1 |
R1-7-2 Flywheel, & Starter Ring Gear, Rg Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
R1-3-2 Block Assembly, Rg Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***34 | Plug | 1 |
R1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***00 | Bracket, Engine Mounting, Left Hand | 1 |
R1-7-1 Flywheel, & Starter Ring Gear, Re Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
R1-6-2 Timing Case, Camshaft & Gears, Rg Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
R1-6-1 Timing Case, Camshaft & Gears, Re Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
R1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Rg Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 0 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 0 |
R1-1-1 Engine, Complete, 80bhp - 65amp, Re Build
| 01***33 | Engine, Complete 1104c-44, Nat/Asp, 82.5bhp | 1 |
R1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Re Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 2 |
R1-2-1 Engine Short, Re Build
| 02***02 | Engine, Short | 1 |
R1-1-3 Engine, Complete, 100bhp - 85amp, Rg Build
| 01***32 | Engine, Complete 1104c-44t, Turbocharged, 100bhp | 1 |
R1-5-1 Fans, Pulleys, & Fan Belt, Re Build
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***06 | Belt, Fan - Pair, L=1300mm | 1 |
R1-5-2 Fans, Pulleys, & Fan Belt, Rg Build
| 02***79 | Screw | 3 |
| 02***56 | Spacer, Fan, 38mm | 1 |
| 02***06 | Belt, Fan - Pair, L=1300mm | 1 |
R1-3-1 Block Assembly, Re Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***34 | Plug | 1 |
R1-1-2 Engine, Complete, 100bhp - 65amp, Rg Build
| 01***34 | Engine, Complete 1104c-44t, Turbocharged, 100bhp | 1 |
R2-7-2 Heater Plugs, & Pick-Up Sensor, Rg Build
| 71***73 | Sensor, Cold Start | 1 |
| 71***66 | Connector, Bar Thermostart | 1 |
| 71***72 | Thermostart | 4 |
R2-3-1 Rocker Cover, Re Build
| 02***64 | Screw | 10 |
| 02***65 | Cover, Rocker | 1 |
| 02***66 | Gasket, Rocker Cover | 1 |
R2-5-1 Cover, Cylinder Head
| 02***77 | Cover | 1 |
| 02***10 | Bolt | 3 |
R2-1-1 Cylinder Head, Re Build
| 02***95 | Plug, Taper | 1 |
| 02***07 | Plug, Core, D=50mm | 2 |
| 02***34 | Plug | 4 |
R2-6-1 Lifting Plates, Engine, Re Build
| 02***63 | Bracket, Engine Lifting | 2 |
| 02***90 | Bracket, Lifting | 1 |
| 82***01 | Screw | 4 |
R2-6-2 Lifting Plates, Engine, Rg Build
| 02***63 | Bracket, Engine Lifting | 1 |
| 02***90 | Bracket, Lifting | 1 |
| 82***01 | Screw | 4 |
R2-2-2 Rocker Assembly, Push Rods & Tappets, Rg Builds
| 02***43 | Rod, Push | 8 |
| 02***03 | Nut, Lock | 2 |
| 02***96 | Tappet | 8 |
R2-2-1 Rocker Assembly, Push Rods & Tappets, Re Builds
| 02***43 | Rod, Push | 8 |
| 02***03 | Nut, Lock | 2 |
| 02***96 | Tappet | 8 |
R2-1-2 Cylinder Head, Rg Build
| 02***95 | Plug, Taper | 1 |
| 02***07 | Plug, Core, D=50mm | 2 |
| 02***34 | Plug | 4 |
R2-3-2 Rocker Cover, Rg Build
| 02***64 | Screw | 10 |
| 02***65 | Cover, Rocker | 1 |
| 02***66 | Gasket, Rocker Cover | 1 |
R2-7-1 Heater Plugs, & Pick-Up Sensor, Re Build
| 71***73 | Sensor, Cold Start | 1 |
| 71***66 | Connector, Bar Thermostart | 1 |
| 71***72 | Thermostart | 4 |
R2-5-2 Cover, Cylinder Head
| 02***77 | Cover | 1 |
| 02***10 | Bolt | 3 |
R2-4-2 Breather, Engine Oil, Rg Build
| 02***90 | Spring | 1 |
| 02***59 | Bracket | 1 |
| 02***64 | Screw | 2 |
R2-4-1 Breather, Engine Oil, Re Build
| 02***64 | Screw | 2 |
| 02***73 | O Ring | 1 |
| 02***74 | Seal | 1 |
R3-4-1 Exhaust System, Naturally Aspirated, Re Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 10 |
| 13***3Z | Nut, Self Lock, M8 | 8 |
| 13***8Z | Capscrew | 2 |
R3-1-2 Manifold, Induction, Rg Build
| 02***36 | Gasket | 3 |
| 02***39 | Plate | 3 |
| 02***83 | Clip, Hose | 2 |
R3-2-1 Manifold, Exhaust, Re Build
| 02***17 | Gasket, Exhaust Manifold | 1 |
| 02***13 | Manifold, Exhaust | 1 |
| 02***52 | Screw | 8 |
R3-4-2 Exhaust System, Turbo Charged, Rg Build
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 10 |
R3-2-2 Manifold, Exhaust, Rg Build
| 02***16 | Manifold, Exhaust | 1 |
| 02***17 | Gasket, Exhaust Manifold | 1 |
| 02***52 | Screw | 8 |
R3-3-1 Filter, Air, Re Build
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***7Z | Bolt | 2 |
R3-1-1 Manifold, Induction, Re Build
| 02***36 | Gasket | 4 |
| 02***39 | Plate | 3 |
| 02***19 | Screw | 2 |
R3-3-2 Filter, Air, Rg Build
| 13***0Z | Bolt, M8x40 | 2 |
| 13***7Z | Bolt | 2 |
| 13***1Z | Nut, M8 | 2 |
R4-3-2 Radiator, Fittings & Mountings, Rg Build
| 12***62 | Washer, Spreader | 6 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
R4-4-1 Radiator & Hoses
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 14***2Z | Washer | 2 |
R4-2-1 Thermostat, Housing, Inlet & Outlet, Re Builds
| 02***75 | Thermostat | 1 |
| 02***76 | O Ring | 1 |
| 02***44 | O Ring | 1 |
R4-1-1 Pump, Water, Re Build
| 02***80 | Pump, Water Assembly | 1 |
| 02***81 | Kit-Repair, Water Pump | 1 |
| 02***78 | Gasket, W/Pump To T/Case | 1 |
R4-3-1 Radiator, Fittings & Mountings
| 12***62 | Washer, Spreader | 6 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 22 |
R4-2-2 Thermostat, Housing, Inlet & Outlet, Rg Builds
| 02***75 | Thermostat | 1 |
| 02***76 | O Ring | 1 |
| 02***44 | O Ring | 1 |
R4-1-2 Pump, Water, Rg Build
| 02***80 | Pump, Water Assembly | 1 |
| 02***81 | Kit-Repair, Water Pump | 1 |
| 02***78 | Gasket, W/Pump To T/Case | 1 |
R5-1-2 Sump, Oil, & Fittings, Rg Build
| 02***82 | Plug, Oil Drain | 1 |
| 02***02 | Clip | 1 |
| 02***98 | O Ring | 1 |
R5-5-1 Cooler, Oil, Re Build
| 02***02 | Gasket, Oil Cooler To Block | 1 |
| 02***03 | Gasket | 2 |
| 02***05 | Cooler, Oil | 1 |
R5-5-2 Cooler, Oil, Rg Build
| 02***02 | Gasket, Oil Cooler To Block | 1 |
| 02***03 | Gasket | 2 |
| 02***04 | Element, Oil Cooler | 1 |
R5-4-1 Filter, Oil, & Oil Feed Adapter, Re Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***16 | Connector | 1 |
| 02***30 | Head, Oil Filter | 1 |
R5-4-2 Filter, Oil, & Oil Feed Adapter, Rg Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***16 | Connector | 1 |
| 02***30 | Head, Oil Filter | 1 |
R5-2-2 Pump, Oil
| 02***85 | Pump, Oil | 1 |
| 02***18 | Screw | 5 |
R5-2-1 Pump, Oil
| 02***85 | Pump, Oil | 1 |
| 02***18 | Screw | 5 |
R5-1-1 Sump, Oil, & Fittings, Re Build
| 02***82 | Plug, Oil Drain | 1 |
| 02***02 | Clip | 1 |
| 02***98 | O Ring | 1 |
R6-12-1 Fuel Injection Pump, Service Parts, Rg Build
| 17***22 | Washer, Cup | 1 |
| 17***01 | Connector, Fuel Pressure | 4 |
| 17***03 | Screw | 4 |
R6-1-4 Pump, Fuel Injection, Re Build
| 02***94 | Gear, Fuel Injection Pump | 1 |
| 02***95 | Washer | 3 |
| 02***96 | O Ring | 1 |
R6-7-2 Pump, Fuel Lift, & Filter Assembly
| 02***32 | Washer | 2 |
| 02***80 | Screw, M6x40mm | 2 |
| 17***00 | Pump, Electric Fuel Lift, Filter Assembly | 1 |
R6-6-1 Filter, Fuel Sediment
| 32***71 | Element, Fuel Sediment Filter | 1 |
| 32***73 | Plug, Drain Assembly | 1 |
| 32***81 | Screw, Bleed | 1 |
R6-3-4 Fuel Pipes, Injection Pump, Re Build
| 02***23 | Connector, Fuel | 1 |
| 02***26 | Spacer | 1 |
| 02***38 | Bracket, Support | 1 |
R6-12-2 Fuel Injection Pump, Service Parts, Rg Build
| 17***22 | Washer, Cup | 1 |
| 17***01 | Connector, Fuel Pressure | 4 |
| 17***03 | Screw | 4 |
R6-3-3 Fuel Pipes, Injection Pump, Rg Build 100bhp
| 02***22 | Olive | 1 |
| 02***57 | Union | 1 |
| 02***64 | Olive | 1 |
R6-1-3 Pump, Fuel Injection, 100bhp, Rg Build
| 02***12 | O Ring | 1 |
| 02***27 | Gear, Fuel Injection | 1 |
| 02***95 | Washer | 3 |
R6-4-1 Fuel Pipes, Fuel Tank To Filter
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
R6-1-2 Pump, Fuel Injection, Rg Build
| 02***12 | O Ring | 1 |
| 02***27 | Gear, Fuel Injection | 1 |
| 02***95 | Washer | 3 |
R6-1-1 Pump, Fuel Injection, Re Build
| 02***94 | Gear, Fuel Injection Pump | 1 |
| 02***95 | Washer | 3 |
| 02***96 | O Ring | 1 |
R6-2-3 Injectors, Fuel, & Injection Pipes, Re Build
| 02***26 | Clamp | 1 |
| 02***30 | Hose, Fuel Leak-Off | 3 |
| 02***35 | Cap, Blanking | 1 |
R6-7-1 Pump, Fuel Lift, & Filter Assembly
| 02***32 | Washer | 2 |
| 02***80 | Screw, M6x40mm | 2 |
| 17***00 | Pump, Electric Fuel Lift, Filter Assembly | 1 |
R6-11-2 Fuel Injection Pump, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-3-2 Fuel Pipes, Injection Pump, Rg Build
| 02***22 | Olive | 1 |
| 02***57 | Union | 1 |
| 02***86 | Tie, Cable | 1 |
R6-2-1 Injectors, Fuel, & Injection Pipes, Re Build
| 02***26 | Clamp | 1 |
| 02***44 | Clip | 2 |
| 02***45 | Clip | 1 |
R6-11-1 Pump, Fuel Injection, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-11-3 Fuel Injection Pump, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-2-2 Injectors, Fuel, & Injection Pipes, Rg Build
| 02***25 | Clamp | 1 |
| 02***30 | Hose, Fuel Leak-Off | 3 |
| 02***31 | Pipe, Fuel Injector No.1; Use 1 Off Each 02/20***51,02/20***52,02/20***53,, 02/20***54,02/20***44,02/20***45 & 02/20***26. | 1 |
R6-3-1 Fuel Pipes, Injection Pump, Re Build
| 02***23 | Connector, Fuel | 1 |
| 02***26 | Spacer | 1 |
| 02***38 | Bracket, Support | 1 |
R7-5-1 Compressor 12.Volt, Air Conditioning
| 02***45 | Belt, Fan, Single | 1 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***8Z | Bolt, M10x80 | 1 |
R7-7-1 Block Heater, Freeze Plug Type, 120v, Optional
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
| 71***18 | Harness, Engineblock Heater, 120voltv | 1 |
| 71***11 | Element, Heater, 120volt | 1 |
R7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
R7-2-1 Turbocharger, Pipework & Mounting, Rg Build
| 02***06 | Pipe, Turbo Oil Feed | 1 |
| 02***07 | Bolt, Banjo | 2 |
| 02***08 | Pipe, Turbo Oil Drain | 1 |
R7-1-1 Turbocharger, Rg Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***40 | Turbocharger | 1 |
| 02***61 | Nut | 4 |
R7-7-2 Block Heater, Freeze Plug Type, 240v, Optional
| 71***31 | Kit-Heater, Engine Block, 240v, Freeze Plug Type | 1 |
| 71***10 | Cable, Engine Block Heater, 240v | 1 |
| 71***12 | Element, Heater, 240v | 1 |
R8-1-2 Gasket Set, Top, Rg Build
| 02***36 | Gasket | 1 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***76 | O Ring | 1 |
R8-2-1 Gasket Set, Bottom, Re Build
| 02***98 | O Ring | 1 |
| 02***87 | Gasket | 1 |
| 02***12 | O Ring | 1 |
R8-2-2 Gasket Set, Bottom, Rg Build
| 02***98 | O Ring | 1 |
| 02***87 | Gasket | 1 |
| 02***12 | O Ring | 1 |
R8-1-1 Gasket Set, Top, Re Build
| 02***36 | Gasket | 1 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***76 | O Ring | 1 |
520S LE serial number reference
On Loadall telehandlers the identification plate is in one of the factory-specified positions on the chassis or cab frame, typically near the cab step or the boom-pivot area. The PIN encodes model and build spec; engine, axles, and gearbox carry their own plates. Verify against the stamped frame digits if the plate is unreadable.
| Prefix | Identifies | Notes |
|---|---|---|
| 279598 | JCB 520S (High Power) starting serial number. Applies to 520S models from this point onwards. | Verified as the start of the 520S (High Power) production run. Source text explicitly lists '520S (High Power): Starting Serial Number 279598'. The 'LE' designation is not explicitly tied to this specific serial break in the provided service manual data, which groups it under the base 520S model. Treat as applicable to 520S LE if configured as High Power. |
| 0279598 - 0284771 | JCB 520, 520 LE, & 520 S Telehandler cylinder rebuild/repair seal kit applicability. | Confirmed by HW Part Store listing for cylinder seal kits applicable to 520/520 LE/520 S. Serial range matches source. |
| 0789001 - 0790999 | JCB 520, 520 LE, & 520 S Telehandler cylinder rebuild/repair seal kit applicability. | Confirmed by HW Part Store listing for cylinder seal kits applicable to 520/520 LE/520 S. Serial range matches source. |
| 0881000 - 0882999 | JCB 520, 520 LE, & 520 S Telehandler cylinder rebuild/repair seal kit applicability. | Confirmed by HW Part Store listing for cylinder seal kits applicable to 520/520 LE/520 S. Serial range matches source. |
| 1048000 - 1049999 | JCB 520, 520 LE, & 520 S Telehandler cylinder rebuild/repair seal kit applicability. | Confirmed by HW Part Store listing for cylinder seal kits applicable to 520/520 LE/520 S. Serial range matches source. |
| 1411000 - 1411999 | JCB 520, 520 LE, & 520 S Telehandler cylinder rebuild/repair seal kit applicability. | Confirmed by HW Part Store listing for cylinder seal kits applicable to 520/520 LE/520 S. Serial range matches source. |
| 1462000 - 1462269 | JCB 520, 520 LE, & 520 S Telehandler cylinder rebuild/repair seal kit applicability. | Confirmed by HW Part Store listing for cylinder seal kits applicable to 520/520 LE/520 S. Serial range matches source. |
Frequently asked questions
What engine does the JCB 520S LE use?
The JCB 520S LE uses a 90 hp turbo-charged engine, part of the Dieselmax or EcoMAX family, starting at serial number the OEM part reference.
What is the operating weight of the JCB 520S LE?
The standard operating weight is approximately 4.87 tons (9,900 lbs), varying by configuration and attachments.
What model replaced the JCB 520S LE?
The 520S LE was succeeded by later iterations in the 500 Series, such as the 520-50, which continued production from 2004 to 2017.
What 520S LE owners discuss
What are the known powertrain and hydraulic behaviors for the JCB 520S LE?
The machine utilizes a 4-speed Synchro shuttle transmission. Community reports indicate the transmission is generally reliable up to approximately 4,000 hours, after which failure rates increase. Common hydraulic issues include fluid leaks from worn seals and hoses, sluggish response due to low fluid levels or trapped air, and overheating during continuous heavy use. The shuttle reverser system is sensitive to suction strainer blockage; topping up the shuttle box may temporarily restore forward/reverse function, but a completely blocked strainer or burnt forward clutch pack can cause total loss of drive. The transmission and hydraulic systems share fluid, requiring specific universal transmission/hydraulic oil that meets Caterpillar T02 or T04 specifications if JCB-specific fluid is unavailable. Avoid mixing red Dexron III with golden-brown universal oil. Use JCB 10W/30 multigrade oil for the first 100 hours of a new or reconditioned engine, then switch to the recommended lubricant. Grease points require lithium-based, No. 2 consistency grease. The total hydraulic system capacity varies by configuration and must be verified with the sight glass with all rams closed.
What undercarriage or wear patterns are typical for this machine type?
The standard configuration uses 10.5/80-18 non-ballasted tires. The chassis is described as sturdy and stable on rough terrain. However, the machine has a tight turning radius, which can cause accelerated tire wear in confined spaces. Pushing a non-running Loadall is extremely difficult due to the hydrostatic transmission and all-wheel drive system, risking damage to the transmission and drivetrain components. The machine is often used in agriculture, where exposure to corrosive materials can accelerate wear on hydraulic cylinders and chassis components. Regular inspection of hydraulic cylinders for leaks is recommended to maintain longevity.
What engine quirks are associated with the JCB 520S LE series?
The engine is a Perkins diesel, with specific models identified as engine marked 2257 delivering 76 gross horsepower at 2000 RPM and 213.7 pound-feet of torque at 1400 RPM. Later 520-50 variants feature a turbocharged engine with a displacement of 269 cubic inches (4,402 cubic centimeters). Common engine issues include stalling, which may be caused by fuel delivery problems rather than just fuel starvation. Owners report checking the fuel filter, the cone filter in the sediment bowl, and the screen in the lift pump. Bleeding the system is often necessary after filter changes. Excessive blue or black smoke indicates burning oil or incomplete combustion. Overheating can result from a faulty cooling system, low coolant levels, or a blocked radiator. Coolant mixtures should be checked for antifreeze percentage to prevent freezing in cold climates.
What are the common electrical and sensor issues?
Electrical system failures often manifest as faulty wiring, corroded connections, or weak batteries that prevent starting. Sensor malfunctions can trigger warning lights and cause inefficient operation. The steering system is electronically selected; issues such as being stuck in crab steer may stem from electrical faults rather than mechanical failure. Regular inspection of wiring for wear or corrosion and frequent testing of the battery and connections are advised. Keep electrical components clean and free of debris.
What should be checked when buying a used 520S LE?
Check the transmission for slipping gears, unusual noises (grinding or whining), and delayed engagement. Verify the shuttle reverser function and check the suction strainer for blockage. Inspect hydraulic cylinders for leaks and test hydraulic response speed. Check the engine for stalling issues, smoke color, and proper coolant levels. Verify the condition of the 10.5/80-18 tires and the chassis for corrosion. Ensure the electronic steering selection works correctly and is not stuck in crab steer. Check the fuel system, including the filter, sediment bowl cone filter, and lift pump screen. Verify the operation of the air conditioning and heater, as the AC unit is often reported as weak.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 520S LE. Related factory variants of the same model family:
520S LE
Need a specific 520S LE part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.