JCBconstructiontelescopic handlers (loadall)
Jcb 510-56
Maintenance schedule, common problems & OEM parts breakdown
The JCB 510-56 is a rough-terrain telescopic handler within the Loadall family, engineered for high-capacity lifting with a 10,000 lb (4,535 kg) capacity and a 56 ft (17 m) lift height. Powered by a Tier 4 Final JCB EcoMAX 4.4-liter turbocharged diesel engine producing 109 hp (81 kW), the machine weighs approximately 29,900 lb (13,560 kg). It features a one-piece fully welded chassis, wide-set stabilizers, and a high boom design optimized for masonry and framing applications. Configurations include fully glazed cabs or canopies, with options for air conditioning, industrial tires, and single or twin proportional control levers.
The 510-56 introduced wide-set stabilizers to the 500-series range, significantly enhancing stability and lift capacity compared to predecessors. Its sealed-for-life SCR system eliminates DPF regeneration downtime, a key differentiator in the used market where uptime and residual value are critical. The machine remains highly sought after for rental fleets due to its ground-level service access, 500-hour engine oil intervals, and robust EcoMAX powertrain, which allows for de-emissionization to run on lower-grade fuels in various global markets.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 510-56 specifications
Engine
| Model | JCB EcoMAX |
| Configuration | Tier 4 Final |
| Gross Power | 114 hp (85 kW) @ 2,200 rpm |
| Net Power | 109 hp (81 kW) @ 2,200 rpm |
| Displacement | 4.4 L (269 cu in) |
| Cylinders | 4 |
| Emissions Tier | Tier 4 Final / EU Stage IIIA |
Weights
| Operating Weight | 29,900 lb (13,562 kg) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 21 ft 7 in (0.18 m) |
| Transport Width | 8 ft 1 in (0.03 m) |
| Transport Height | 8 ft 10 in (0.25 m) |
| Wheelbase | 124 in (3.15 m) |
| Ground Clearance | 17.5 in (0.44 m) |
| Turning Radius (Outside Tires) | 14.1 ft (4.30 m) |
Performance
| Max Travel Speed | 15.5 mph (24.9 km/h) |
| Max Lift Capacity | 10,000 lb (4,536 kg) |
| Max Lift Height | 56 ft 0 in (0 m) |
| Max Forward Reach | 42 ft 0 in (0 m) |
| Capacity at Max Height | 4,000 lb (1,814 kg) |
| Capacity at Max Reach | 3,000 lb (1,361 kg) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 33.3 gal (126 L) |
| Hydraulic System | 35 gal (132 L) |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
510-56 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 12.5-15 liter (3.3-4.0 US gal) | JCB 15W/40 Multigrade SAE15W/40, MIL-L-46152B, API CD/SE, MIL-L-2104 (-10 °C to 50 °C / 14 °F to 122 °C); JCB Super Universal Agricultural SAE10W/30, MIL-L-2105, MIL-L-46152 (-15 °C to 30 °C / 5 °F to 86 °F); JCB Torque Converter Fluid SAE10W, MIL-L-46152, MIL-L-2104D (-18 °C to 0 °C / 0 °F to 32 °F) |
| Cooling system | 12.92 liter (3.4 US gal) | JCB Universal Antifreeze/water ASTM D3306-74 (55% mixture starts to freeze at -36° C / -33 °F) |
| Fuel tank | 126 liter (33.3 US gal) | Diesel fuel |
| Transmission | 18.25 liter (4.8 US gal) | JCB Special Transmission Fluid ESP-M2C 33G |
| Hydraulic system AND tank | 132.5 liter (35 US gal) | JCB Genuine Hydraulic Oil |
| Front axle housing | 17.4 liter (4.6 US gal) | JCB Special Gear Oil ESEN-M2C 86A/B |
| Rear axle housing | 17.4 liter (4.6 US gal) | JCB Special Gear Oil ESEN-M2C 86A/B |
| Grease | N/A | JCB Blue Grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 510-56 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 510-56 beyond the schedule
Predictive Maintenance & Fluid Analysis
Collect baseline samples from the engine, hydraulic, axle, and final drive systems at the 500-hour interval. Compare subsequent samples against this baseline to detect bearing wear or contamination early. Inspect the hydraulic return filter magnet for metallic debris at every 250-hour service. Monitor the DEF level via the 3.5-inch color TFT screen and check the built-in pre-filters in the diesel and DEF filler necks for contamination. Use the JCB ServiceMaster diagnostic tool to interpret fault codes and track fluid condition trends.
Corrective & Common Repairs
Address hose burst check valves on the rams to prevent cylinder collapse if hydraulic lines fail. Inspect the double boom chain extension system for tension and wear to maintain precise telescoping. Check the dry lubricant wear pads, which extend service intervals to 500 hours, for excessive wear. Verify the condition of the inverted U-shaped boom pressing and fully welded closing plates for stress cracks. Ensure the gas-assisted engine hood seals properly to maintain the wide service bay access for the side-mounted engine.
Overhaul & Rebuild Points
At the 2000-hour interval, drain and clean the hydraulic tank thoroughly before refilling with JCB-spec hydraulic oil. Inspect the one-piece fully welded chassis and side frames for structural fatigue or unauthorized welding. Check the turbocharger shaft play and charge cooler boot integrity. Service the immersed brake components and inspect disc wear. Evaluate the injector spray patterns using diagnostic tools to determine if replacement is necessary before performance drops.
Seasonal & Environment Servicing
Utilize the twin standard batteries for cold starting, ensuring the hinged protective door is secure. In hot climates, verify the air conditioning system pressure and evaporator condition. Check the 7-speed fan heater for proper operation in cold weather. Ensure the cooling fan airflow is angled upwards to reduce dust build-up in the engine bay. Inspect the electrophoretic alloy dipped cab for corrosion, particularly in salt-heavy environments. Verify the tinted cab glass reflects solar energy effectively to maintain operator comfort.
510-56 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 332/C2488 | Filter, Fuel, Assembly | Fuel system service | Check fitment → |
| 320/20172 | Alternator, 14v/95amp, Un-Filtered | Scheduled service item | Check fitment → |
| 30/925759 | Filter, Paper | Scheduled service item | Check fitment → |
| 30/925959 | Filter, Re-Circulation | Scheduled service item | Check fitment → |
| 923/10127 | Filter, Carbon | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
510-56 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| S049 | Boom Extend Switch Open Circuit | Faulty proximity sensor at the boom, damaged wiring, or bent mounting bracket causing incorrect gap. | Inspect the boom extension proximity sensor and its mounting bracket for damage or misalignment. Check wiring continuity and sensor gap. |
| Z111 | Error Logs Full | The machine's electronic control module has reached its maximum storage capacity for fault history. | Clear the stored fault codes using a diagnostic tool or by cycling power after resolving the underlying issues. |
| D001 | Critical Engine or Hydraulic Fault | Low engine oil pressure, low coolant level, or critical hydraulic system failure. | Check engine oil pressure and coolant levels immediately. Inspect hydraulic fluid levels and filters. Shut down the engine if the warning persists. |
| P062D-11 | DEF System Fault | Low Diesel Exhaust Fluid (DEF) level or sensor error in the aftertreatment system. | Refill the DEF tank. Verify the DEF level sensor and associated wiring for proper operation. |
| P0087-23 | Fuel Rail Pressure Too Low | Clogged fuel filter, failing fuel pump, or restricted fuel lines. | Inspect and replace the fuel filter. Check fuel lines for leaks or blockages and verify fuel pump pressure during cranking. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
510-56 attachments & work tools
Fork Carriers & Pallet Forks
JCB self-levelling carriage pallet forks are standard or available for material handling. The machine supports a quick coupler fork carriage for rapid attachment changes without tools. Standard configurations include two standard prongs for palletized materials.
Buckets & Grapples
General-purpose buckets are available for bulk loads and site supplies. Grapples and grabs are supported for material handling applications. Load capacities for these attachments vary by configuration and series.
Lifting Hooks & Jibs
Lifting hooks are used for crane-like lifting tasks. Jibs extend the reach for specific lifting applications. These tools require verification of the relevant load chart for the machine model.
Work Platforms
Work platforms are available for elevated access. These attachments allow personnel to reach high areas safely. Operators must check JCB approved attachments and relevant load charts.
Truss Booms
Truss booms provide extended reach for framing and masonry tasks. They are suitable for the 510-56's 56-foot reach capability. Compatibility depends on the specific machine configuration.
Coupler Systems
A quick coupler system is available for rapid attachment changes. This system allows installation of buckets, platforms, and jibs without tools. The system is compatible with the machine's hydraulic specifications.
Hydraulic Requirements
Auxiliary hydraulic functions support attachments with a max operating pressure of 3,770 psi. Max flow rate for attachments is 29 gal/min. Hydraulic kits may be required for specific tool configurations.
Guarding & Safety
Optional front and top screen roof guards provide protection from falling objects. The cab and canopy are ROPS and FOPS certified. Hose burst check valves prevent ram collapse in case of hose failure.
All 510-56 assemblies by section
Every catalogued assembly group for the Jcb 510-56. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-1-1 Tool Carrier
| 13***9Z | Bolt, M10x90mm | 1 |
| 13***1Z | Bolt, M12x110 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
A3-20-1 Forks, Carriage,Usa
B Bodywork, Cab, Loader End
B1-8-1 Fenders, 506
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 8 |
| 13***0Z | Bolt, M10 X 100 | 8 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-7-20 Step, Rear
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***1Z | Nut | 8 |
B1-4-5 Fuel Tank Guard, (Back)
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***5Z | Bolt, M12x20 | 1 |
| 13***8Z | Bolt, M12 X 30 | 2 |
B1-20-1 Chassis Grommets, Location
| 33***76 | Grommet, R45 X 140 | 1 |
| 33***71 | Grommet, R28 X 115 | 1 |
| 33***46 | Grommet, 50mm Dia. | 1 |
B1-5-1 Engine Pod,Base, No Access Panel
| 13***7Z | Bolt, M10x25 | 6 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
B1-15-2 Counterweight, With Recovery Hitch
| 13***7Z | Set, Pin M20 X 25 Lg. | 2 |
| 13***3Z | Bolt, M20 X 2.5 X 130mm | 2 |
| 13***5Z | Bolt | 2 |
B1-15-4 Counterweight, 510-56
| 13***2Z | Bolt, M24 X 240mm Long | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
B1-14-1 Stabiliser, Installation
| 13***08 | Bolt | 4 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
| 13***1Z | Bolt, M12x110 | 2 |
B1-8-10 Fenders, 507 509 510
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
| 13***3Z | Nut, M12 | 16 |
B1-4-4 Fuel Filler Flap
| 13***01 | Nut | 1 |
| 33***02 | G.A., Sa Fuel Filler Flap | 1 |
| 33***03 | Cover, Protection Flap | 1 |
B1-7-17 Safety Strut, Boom
| 33***85 | Strut, Boom | 1 |
| 92***03 | Strip, Sealing | 2 |
B1-7-12 Safety Strut, Mounting
| 13***1Z | Bolt | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
B1-20-2 Chassis Grommets, Location
| 33***75 | Grommet, R15 X 30 | 2 |
| 33***76 | Grommet, R45 X 140 | 1 |
| 33***57 | G.A. | 0 |
B1-7-10 Safety Strut, Boom
| 33***72 | Decal, Boom,Safety Strut | 1 |
B1-13-2 Noise Quilts, Engine Pod Side, (N.America)
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***02 | G.A., Sa Pod Side Cover | 0 |
B1-3-12 Rear Light Arms, And Brackets
| 12***53 | Washer, Rebound | 2 |
| 13***0Z | Bolt, M10 X 40 | 6 |
| 13***7Z | Bolt | 2 |
B1-7-16 Safety Strut, Boom
| 33***85 | Strut, Boom | 1 |
| 92***03 | Strip, Sealing | 2 |
B1-3-11 Front Light Brackets, Mirror Installation, Chassis & Cab Etc
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
B1-1-2 Chassis
| 33***18 | G.A. | 0 |
| 33***20 | G.A. | 0 |
| 33***77 | Chassis, 507,509 | 1 |
B1-1-1 Chassis
| 33***16 | G.A. | 0 |
| 33***31 | Chassis, 506-36 | 1 |
B1-15-1 Counterweight, Wth Tow Hitch
| 13***2Z | Bolt, M24 X 240mm Long | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
B1-5-11 Engine Pod,Cover, Installation, Non-Noise
| 12***35 | Joint, Ball | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***0Z | Bolt, M8x40 | 4 |
B1-6-1 Tank,Hydraulic, Fittings
| 12***53 | Gauge, Sight | 1 |
| 13***9Z | Setscrew, M8x35 | 14 |
| 32***00 | Strainer, Suction | 1 |
B1-3-10 Front Light Brackets, Mirror Installation, Chassis & Cab Etc
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
B1-7-1 Step, Cab Entry, Battery Door
| 12***91 | Washer, Nylon | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 4 |
B1-2-1 Bodyw0rk, Deck Panels
| 13***8Z | Screw, M8x30 | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***9Z | Screw, M10x35mm | 3 |
B1-4-1 Tank, Diesel Fuel
| 13***5Z | Bolt, M12x20 | 3 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***2Z | Bolt, M12 X 50mm | 2 |
B1-15-3 Counterweight, Under Hyd.Tank
| 13***2Z | Bolt | 4 |
| 14***2Z | Washer, M20 | 4 |
| 33***44 | Counterweight, Cast,(Under Tank) | 1 |
B1-7-21 Step, Rear
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
B1-1-3 Chassis
| 33***22 | G.A. | 0 |
| 33***70 | Chassis, 510-55 | 1 |
| 33***01 | Chassis, M/C | 1 |
B2-1-30 Gauge,Inclinometer
| 16***95 | Cab, Inclinometer, Assembly | 0 |
| 70***00 | Gauge, Inclinometer/Level | 1 |
B2-4-20 Guard,Debris/Mud, Cab Front, Optional
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***4Z | Bolt | 1 |
B2-14-1 Emergency Hammer
| 14***02 | Screw | 2 |
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
B2-3-4 Door,Lower
| 13***3D | Setscrew | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***6D | Washer, M6 Plain | 4 |
B2-4-5 Cab/Canopy, Front Covers
| 13***7D | Setscrew, M8x25 | 5 |
| 13***7D | Setscrew, M12 X 25 | 2 |
| 14***3D | Washer, Large | 4 |
B2-4-15 Guards,Roof
| 33***22 | Boot, Rubber | 2 |
| 33***56 | Guard, Wa Roof | 1 |
| 82***29 | Washer, M8 Black | 6 |
B2-9-2 Seat,Adjustable Back, 3"Belt
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
B2-2-1 Glazing,Standard
| 16***54 | Strip, Mounting, 20mm X 10mm X 6mm | 4 |
| 33***28 | G.A. | 0 |
| 33***82 | Glass, Rear | 1 |
B2-5-1 Cab,Internal Parts, Covers,Brackets,Etc
| 16***02 | Vent, Abi Cab Assembly | 1 |
| 16***11 | Mounting, Pressing G.A. | 1 |
| 16***72 | Cab, Trim Panels | 0 |
B2-10-5 Sunblind, Roof
| 14***5D | Washer | 2 |
| 33***37 | Hook, Roller Blind | 6 |
| 33***84 | Blind, Roller | 1 |
B2-5-10 Floor Mats
| 12***40 | Plug, Blanking, 7mm | 3 |
| 33***53 | Plate, Kick | 1 |
| 33***45 | Housing, Floor Conduit | 1 |
B2-1-2 Canopy, & Side Glass
| 12***40 | Plug, Blanking, 30mm | 6 |
| 16***54 | Strip, Mounting, 20mm X 10mm X 6mm | 1 |
| 33***20 | Plate, Side Cover | 1 |
B2-15-1 Cab Mirror, External
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3D | Setscrew | 2 |
| 14***6D | Washer, Spring, M6 | 2 |
B2-3-1 Door,Upper
| 33***47 | Hinge, Block, Assembly | 2 |
| 33***48 | Handle, Door | 1 |
| 33***92 | Door, Upper | 1 |
B2-1-1 Cabs
| 12***40 | Plug, Blanking, 30mm | 6 |
| 13***3D | Nut, Self Lock M8 | 8 |
| 14***7D | Washer, M8 Plain | 8 |
B2-5-8 Lower Control, Cab/Canopy,Air Vents
| 21***07 | Vent, Air,Rectangular | 2 |
| 33***74 | Vent, Air(76.5mm Dia.Hole) | 5 |
| 33***49 | Moulding, Centre Duct | 1 |
B2-9-1 Seat, Suspension, Fixed & Adjustable
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
B2-4-1 Cab Parts,External
| 12***40 | Plug, Blanking, 30mm | 6 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 81 |
B2-4-10 Guards,Windscreen
| 33***57 | Guard, Wa Screen | 1 |
| 82***29 | Washer, M8 Black | 8 |
| 82***41 | Screw, Set, M8 X 25, Black | 4 |
B2-3-5 Door,Lower,Steel
| 13***3D | Setscrew | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***6D | Washer, M6 Plain | 4 |
B2-5-2 Canopy, Internal Parts, Covers,Brackets Etc
| 16***03 | Duct, Abi Ga | 1 |
| 16***11 | Mounting, Pressing G.A. | 1 |
| 16***77 | G.A. | 0 |
B2-9-3 Seat,Fixed Back, 3"Belt
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
B2-10-6 No Sun Blind, Construction Build
| 33***45 | Cover, Top | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 2 |
B3-1-2 Booms, Inner,Intermediate, & Outer (42 Ft.)
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 3 |
B3-4-5 Chain & Roller, Installation(56 Ft.)
| 13***7Z | Bolt, M10x25 | 3 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-4-2 Chain & Roller, Installation(42 Ft.)
| 13***4Z | Bolt, 3/8" | 1 |
| 13***0Z | Bolt | 4 |
| 13***8Z | Bolt | 1 |
B3-4-1 Chain & Roller, Installation(36 Ft.)
| 13***4Z | Bolt, 3/8" | 1 |
| 13***0Z | Bolt | 4 |
| 13***8Z | Bolt | 1 |
B3-3-1 Indicator, Boom Angle
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***6Z | Bolt, M8 X 70 | 1 |
| 13***1Z | Nut, M8 | 1 |
B3-6-5 Boom,Pivot Pin, Location
| 10***30 | Pin, Pivot | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M10x90mm | 1 |
B3-8-1 Sensor, Boom
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***2Z | Washer | 4 |
B3-7-1 Pads,Boom Wear
| 13***7Z | Bolt, M12x25mm Long,Tuf-Lo, K | 11 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 14 |
| 13***0Z | Screw, Set M12 X 40 Tuf-Lok | 13 |
B3-1-1 Booms, Inner,Intermediate, & Outer (36 Ft.)
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 3 |
B3-1-3 Boom, Inner,Inters & Outer
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 3 |
B3-7-5 Pads,Boom Wear
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 36 |
| 13***9Z | Bolt, M10x35 Long,Tuf-Lok | 16 |
| 13***1Z | Setscrew, M10 X 45, Tuf-Lok | 4 |
B3-6-1 Boom,Pivot Pin, Location
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***48 | Pin, Pivot; Ss 81***29 | 1 |
B5-2-15 Decals, Nomenclature
| 33***12 | Decal, 506-36, Horizontal | 1 |
| 33***35 | Decal, 507-42, Horizontal | 1 |
| 33***36 | Decal, 506-36, Vertical | 2 |
B5-2-10 Decals, Cab Waist Band
| 33***55 | Decal, Rear Axle Stabilizat, Ion | 1 |
| 33***59 | G.A. | 0 |
| 33***17 | G.A. | 0 |
B5-4-5 Fire Extinguisher
| 16***83 | Extinguisher, Fire | 1 |
| 82***83 | Screw, M6 X 25 | 2 |
| 82***35 | M6 Caged Nut | 2 |
B5-2-1 Decals, South America/R-O-W, Iso
| 33***08 | Decal, Warning-Fan Blades, Remove Key From Ign. | 1 |
| 33***07 | G.A. | 0 |
| 33***40 | Decal, Multi Warning, Iso | 1 |
B5-1-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-5-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 33***88 | Decal, F/Chart, Controls, 510 | 1 |
B5-2-2 Decals, U.S.A./Canada, Ansi
| 33***07 | Label, Fan Guard-Warning, Ansi | 1 |
| 33***12 | G.A. | 0 |
| 33***42 | Decal, Multi-Warning, Ansi | 1 |
C Electrics-Machine, Cab & Engine
C1-1-1 Electrics, Chassis Harness Etc., 506,507,509
| 33***76 | Harness, Rear Lamp | 1 |
| 33***55 | G.A. | 0 |
| 33***87 | Harness, Chassis, 506 507 509 | 1 |
C1-3-6 Stabiliser Harness, Lh, Installation
| 33***02 | Cover, Wa,Lh | 1 |
| 33***60 | Guard, Ram Lh | 1 |
| 33***62 | Harness, Stabiliser Abi | 1 |
C1-3-5 Stabiliser Harness, Rh, Installation
| 33***62 | Harness, Stabiliser Abi | 1 |
| 33***44 | Cover, Wa,Rh | 1 |
| 33***47 | Guard, Ram Rh | 1 |
C1-4-1 Light Head, Lh Dip,Clear
| 13***1Z | Nut | 1 |
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
C1-3-15 Boom, Proximity Switch
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***2Z | Washer | 4 |
C1-10-1 Light,Rear, Combination, Twin Reverse
| 33***83 | G.A. | 0 |
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
C1-9-10 Battery Isolator
| 33***33 | Label, Battery Isolator | 1 |
| 70***00 | Switch, Isolator 150a 24v Dc, (Supplied Cpl With Key 70***01) | 1 |
| 82***29 | Washer, M8 Black | 2 |
C1-1-2 Electrics, Chassis Harness Etc., 510
| 13***3Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 33***76 | Harness, Rear Lamp | 1 |
C1-10-3 Light,Rear, Combination,Lh Dip, Reverse & Fog
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
| 70***74 | Lens, Reverse | 1 |
C1-10-2 Light,Rear, Combination,Rh Dip, Reverse & Fog
| 33***88 | G.A. | 0 |
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
C1-3-10 Stabiliser Harness, Abi
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 14***1Z | Washer, M16 Plain | 4 |
| 33***09 | Harness, Stabiliser Link | 1 |
C1-16-1 Alarm, Reverse
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 4 |
| 71***14 | Plug, Male,8 Way, Deutsch | 1 |
C1-11-1 Light, Reflector
| 14***02 | Screw, No 8x1/2" | 3 |
| 33***85 | G.A. | 0 |
| 70***00 | Reflector, Amber | 3 |
C1-6-1 Fusebox, Primary
| 16***77 | G.A. | 0 |
| 71***00 | Maxi Fuse 60amp | 1 |
| 71***77 | Box, Fuselink, Plug 72***09, 72***08, Terminal 72***78 | 1 |
C1-8-1 Earthing, Engine/Chassis
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 16***63 | G.A. | 0 |
C1-4-2 Light,Head, Rh Dip,Clear
| 13***1Z | Nut | 1 |
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
C1-3-1 Stabiliser Electrics
| 13***08 | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
| 14***3D | Washer, Large | 4 |
C1-9-1 Battery 12v, Carrier
| 13***9D | Screw, M12x35mm Long | 4 |
| 14***1D | Washer | 2 |
| 14***9D | Washer, M12 | 4 |
C2-1-1 Switches & Senders, 12volt Mt3
| 17***02 | Seal, Ring | 1 |
| 32***38 | Switch, Engine Oil Pressure | 1 |
| 32***57 | Seal, Bonded | 1 |
C2-3-1 Starter Motor, 12.Volt
| 13***8Z | Screw, Star Drive, M10 X 30 | 3 |
| 32***35 | Motor, Starter | 1 |
| 32***52 | Motor, Starter | 1 |
C2-4-1 Alternator, 14volt - 95amp
| 13***8Z | Bolt, M10 X 30, Flange Reduced Hex | 1 |
| 13***2Z | Bolt, M10 X 120, Flange Reduced Hex | 1 |
| 32***10 | Alternator, 14v-95amp | 1 |
C2-5-2 Grid Heater Relay, Installation Mt3, Charge Air Cooled Builds
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
C2-2-1 Engine Harness, Installation Mt3
| 12***47 | Clip, Cable | 4 |
| 24***07 | Grommet | 4 |
| 26***00 | Clip, Harness | 3 |
C2-5-1 Grid Heater Relay, Installation Mt3
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M8 X 25, Flange Reduced Hex | 1 |
C2-7-1 Engine Block Heater, 120v
| 16***79 | G.A, Engine Block Heater | 1 |
| 32***50 | Heater, Cylinder Block, 1000w - 120v Mains | 1 |
| 32***53 | Washer, Copper Sealing | 1 |
C3-16-1 Air Con Heater Unit
| 13***8D | Setscrew, M8 X 30mm | 3 |
| 14***7D | Washer, M8 Plain | 3 |
| 14***7D | Washer, M8 Spring | 3 |
C3-16-6 Air-Con,Condenser
| 12***91 | Washer, Nylon | 8 |
| 12***55 | Handle | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
C3-9-8 Steel Roof Liner, With Interior Light, Canopy
| 33***58 | Plate, Wa Steel Head Liner | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 82***60 | Screw, Button Head, M6x25 | 3 |
C3-9-9 Steel Roof Liner, With Interior Light, With Speakers
| 33***30 | Plate, Steel Headliner | 1 |
| 33***91 | G.A. | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
C3-17-7 Heater A/C Unit
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 14***1D | Washer, 1/4" Medium | 2 |
C3-1-6 Electrics, Cab, Harnesses & Fittings, 510
| 13***3Z | Screw | 2 |
| 13***1Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
C3-2-15 Washer Bottle
| 13***1D | Screw, M6x45 | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 14***1D | Washer, Large | 2 |
C3-2-10 Roof Wiper
| 15***00 | Connector, 'T' Piece | 1 |
| 23***15 | Motor, Assembly, Wiper | 1 |
| 24***03 | Grommet | 1 |
C3-16-7 Air Con Heater Unit
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***8Z | Screw, M8x30 | 3 |
| 14***1D | Washer, 1/4" Medium | 2 |
C3-4-1 Switch,Column
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***5Z | Screw, M5 X 20 | 2 |
C3-1-5 Electrics, Cab, Harnesses & Fittings, 506,507,509
| 13***3Z | Screw | 2 |
| 13***1Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
C3-16-5 Receiver Drier, Air-Con
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 16***73 | G.A. | 0 |
C3-16-3 Air-Con Installation
| 33***19 | G.A. | 0 |
| 82***92 | Tie, Cable | 2 |
C3-16-2 Air-Con Heater, Circuit
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
C3-12-3 Beacon,Strobe, Hazard Warning
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C3-2-1 Front Wiper, Single Speed
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 32***76 | Filter, Washer Pump | 1 |
C3-18-1 Fan,Cab Cooling, Optional
| 33***12 | Plate, Fan Retainer | 1 |
| 71***06 | Fuse, 15 Amp, Fuse, 15 Amp; C3 - Thermostart. On Fastrac 185ti From M636--- - Provides Ether Start Circuit Protection. | 1 |
| 71***00 | Fan, 12 Volt; Replaced By 71***40, See San 10523 | 1 |
C3-25-2 Speed Sensor, Without Spacer
| 41***00 | Fluid, Locking | 1 |
| 71***34 | Sensor, Gear Tooth, Deutsch Connector | 1 |
| 82***92 | Screw | 1 |
C3-19-1 Electrics, Rear Axle Stabiliser, Option
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
C3-30-1 Immobiliser Key
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
C3-12-2 Beacon,Rotating, Amber,Hazard Warning
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***00 | Beacon, 12v, (155mm Tall) | 1 |
C3-9-1 Worklights, Front
| 33***83 | G.A. | 0 |
| 70***45 | Light, Working,Lh | 1 |
| 70***46 | Light, Working,Rh | 1 |
C3-10-1 Radio Harness, & Aerial
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***8D | Washer, M10 | 1 |
| 16***78 | G.A. | 0 |
C3-8-1 Horn,Single Tone
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C3-17-3 Heater Installation
| 24***07 | Grommet, Blind, 17.5mm Dia. | 1 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 1 |
| 33***82 | G.A. | 0 |
C3-17-2 Heater Circuit
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
C3-1-1 Cab, Internal Layout, Switches & Instruments
| 33***74 | Plate, Warning Light | 1 |
| 33***79 | Plate, Radio,Blank-Din 1 | 1 |
| 33***14 | Plate, Switch,Lh | 1 |
C3-30-2 Immobiliser Key Pad, Cab & Canopy
| 13***9D | Setscrew | 2 |
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
C3-3-1 Relays & Fuses
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***80 | Plate, Relay Mounting | 1 |
C3-2-6 Rear Wiper
| 25***03 | Jet, Screen Washer | 1 |
| 32***76 | Filter, Washer Pump | 1 |
| 34***17 | Cover, Wiper Motor | 1 |
C3-16-4 Air-Con Hoses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 33***54 | G.A. | 0 |
| 33***43 | Hose, Air-Con | 1 |
C3-25-1 Aux Speed Sensor
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***1Z | Nut, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C3-17-1 Heater
| 13***8D | Setscrew, M8 X 30mm | 3 |
| 14***7D | Washer, M8 Plain | 3 |
| 14***7D | Washer, M8 Spring | 3 |
C3-2-20 No Wipers
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 24***08 | Grommet, Blind | 2 |
| 71***02 | Plug, 4 Way | 2 |
C3-9-2 Worklights, Rear
| 33***69 | G.A. | 0 |
| 33***20 | Harness, Rear Worklight | 1 |
| 70***45 | Light, Working,Lh | 1 |
D Controls-Machine, Engine & Steering
D1-2-1 Parking Brake, Control,Ps750
| 13***8Z | Screw, M8x30 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***6Z | Washer, M6 | 1 |
D1-5-1 Control Levers, Servo
D1-4-10 Control Levers, Auxiliary & Sway
| 13***2Z | Nut, M8 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 16***92 | Rod, Control Assembly | 2 |
D1-4-1 Control Levers, Stabiliser
| 16***49 | Gaiter, Twin Lever | 1 |
| 16***80 | Plate, Gaiter Clamp | 1 |
| 25***14 | Knob | 2 |
D1-4-6 Controls, Auxiliary & Sway
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***04 | Gaiter | 2 |
D1-4-5 Controls, Auxiliary & Sway
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***04 | Gaiter | 2 |
D1-4-16 Control Rods, Auxiliary & Sway
| 13***2Z | Nut, M8 | 2 |
| 21***04 | Pin, Clevis | 2 |
| 21***05 | Pin, Split | 2 |
D1-4-15 Control Rods, Auxiliary & Sway
| 13***2Z | Nut, M8 | 2 |
| 21***04 | Pin, Clevis | 2 |
| 21***05 | Pin, Split | 2 |
D2-1-1 Control,Throttle
| 13***7D | Setscrew M5x25 | 1 |
| 13***3D | Setscrew | 3 |
| 13***2D | Bolt | 4 |
D3-2-1 Steering Column, Covers
| 13***0Z | Setscrew, M5x10mm | 2 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 14***1Z | Washer, 2 Ba | 4 |
D3-1-1 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 16***61 | Bearing, Thrust Assembly | 1 |
E Hydraulics & Air Including, Steering
E1-2-3 Circuit, Lift End
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-1-1 Circuit,Neutral, 3 Stage Pump
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 8 |
| 24***05 | O Ring | 1 |
E1-6-2 Circuit, Servo Pilot Controls, Hoses
| 33***81 | G.A. | 0 |
| 61***00 | Hose, Straight-Elbow | 1 |
| 61***00 | Hose, 1/4"Bsp X 600mm | 3 |
E1-10-1 Circuit, Sway Hydraulics
| 13***8Z | Bolt | 2 |
| 13***9Z | Bolt, M8 X 35mm | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 5 |
E1-13-1 Circuit,Cooling Fan, Non-Reversing Mt3, 84.5bhp/99bhp Engine Builds
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 8 |
E1-5-1 Circuit,Steering
| 13***0Z | Bolt | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 16***50 | Adaptor | 1 |
E1-2-10 Circuit, Inner Boom
| 13***7Z | Screw, Hexagon M8 X 25 | 5 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***8Z | Bolt, M8x80mm Long | 7 |
E1-11-1 Circuit, Stabiliser-Rear Axle, Hydraulics
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E1-2-2 Circuit, Lift End
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-50-1 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-1-5 Circuit,Neutral, 3 Stage Pump, With Rear Axle Stabiliser
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 8 |
| 24***05 | O Ring | 1 |
E1-6-1 Circuit, Servo Pilot Controls, Hoses
| 33***75 | G.A. | 0 |
| 61***00 | Hose, Straight-Elbow | 1 |
| 61***00 | Hose, 1/4"Bsp X 600mm | 3 |
E1-2-1 Circuit, Lift End
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-5-2 Circuit,Steering
| 13***0Z | Bolt | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 16***50 | Adaptor | 1 |
E1-11-5 Circuit, Stabiliser-Front, Hydraulics
| 33***42 | G.A. | 0 |
| 33***18 | Hose, 3/8"Bsp 4100mm | 4 |
| 33***45 | Hose, 595mm | 4 |
E2-5-2 Motor,Fan Drive, Non-Reversing Mt3, 99bhp & 114bhp Engines
| 33***35 | Motor, Fan Bi-Directional | 1 |
| 33***68 | Motor, Fan | 1 |
E2-2-1 Pump,(Three Stage), Main Hydraulics, Fittings & Mountings (110 L/Min)
| 13***8Z | Bolt | 4 |
| 14***8Z | Washer, Spring | 4 |
| 16***50 | Adaptor | 1 |
E2-1-1 Pump,Three Stage, Main Hydraulics, 110 L/Min
| 20***88 | Pump, Main.3 Stage, Supp No 7029530008 | 1 |
| 35***98 | Valve, Priority Steer | 1 |
| 98***61 | Kit, Seal | 1 |
E2-5-1 Motor,Fan Drive, Non-Reversing Mt3, 84.5bhp Engine
| 33***71 | Motor, Fan | 1 |
| 33***03 | Fan, Motor 16cc-Rev 7 | 1 |
E3-13-1 Valve, Regenerative
| 25***01 | Kit-Repair | 1 |
| 25***02 | Ring, Back Up | 1 |
| 25***03 | Ring, 'O' | 1 |
E3-2-1 Valve, Aux/Sway, Adapters & Mounting
| 13***9Z | Screw, M10x35mm | 2 |
| 13***15 | Screw | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
E3-2-3 Valve, Aux/Sway/Stab, Adapters & Mounting
| 13***9Z | Screw, M10x35mm | 2 |
| 13***15 | Screw | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
E3-7-1 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 32***46 | Element, Hydraulic Filter, 12 Micron,229mm Long | 1 |
| 32***01 | Element, Hydraulic Filter, 5 Micron 254 Long | 1 |
E3-14-1 Pilot Controls, & Installation
E3-14-2 Pilot Controls, & Installation
E3-1-1 Valve,Main Control, Adapters & Mounting
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 3 |
E3-4-2 Valve,Steering
| 33***09 | G.A. | 0 |
| 35***08 | Kit-Seal | 1 |
| 35***02 | Kit, Bearing; San 22117.Made Nla On The Request Of R Bryant, 09/12***05. P Gamble | 1 |
E3-7-5 Filter, Hydraulic, Hpa Mini Filter
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E3-15-5 Valve,Servo,2 Axis, Adapters & Mounting
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
E3-6-2 Steer Mode Valve, Manual,C/W Cable
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***2Z | Nut, Lock | 1 |
E3-16-2 Valve,Pilot, Adapters & Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 5 |
E3-4-1 Steer,Valve, Without Shock Valves
| 33***13 | G.A. | 0 |
| 33***65 | G.A. | 0 |
| 35***08 | Kit-Seal | 1 |
E3-16-1 Valve,Pilot, Adapters & Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 3 |
E3-6-1 Steer Mode Valve, Manual,, Fittings And Lever
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***2Z | Nut, Lock | 1 |
E3-2-2 Valve, Aux/Sway, Adapters & Mounting
| 13***9Z | Screw, M10x35mm | 2 |
| 13***15 | Screw | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
E3-15-1 Valve,Servo,1 Axis, Adapters & Mounting
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
E4-3-1 Ram Steering, Front & Rear Axles
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***06 | O Ring | 1 |
E4-1-1 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-7-2 Ram, Stabiliser L.H., Rear Axle
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 23***55 | O Ring | 1 |
E4-4-1 Ram,Displacement
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-8-2 Ram,Stabiliser,Rh, Front
| 12***71 | Clip | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
| 14***11 | Seal, Bonded | 1 |
E4-8-1 Ram, Stabiliser R.H., Front
| 12***71 | Clip | 2 |
| 13***7Z | Bolt, M10x25 | 4 |
| 14***11 | Seal, Bonded | 1 |
E4-1-2 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-7-1 Ram, Stabiliser R.H., Rear Axle
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 23***55 | O Ring | 1 |
E4-2-1 Ram,Tilt
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-6-3 Ram,Extension
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***8D | Capscrew, Socket Head, M10 X 80mm | 4 |
E4-1-7 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-5-1 Ram,Sway
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 23***55 | O Ring | 1 |
E4-6-5 Ram,Extension
| 13***8D | Capscrew, Socket Head, M10 X 80mm | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***07 | Adapter | 2 |
E4-6-6 Ram, Extension
| 13***18 | Capscrew, M10 X 80 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***07 | Adapter | 2 |
E4-6-1 Ram,Extension
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***8D | Capscrew, Socket Head, M10 X 80mm | 4 |
E4-3-5 Ram.Steering, Front & Rear Axles
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***07 | O Ring | 1 |
E4-1-3 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-1-4 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F Axles, Wheels & Transmission
F1-8-1 Ram,Sway,Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***0Z | Bolt, M12 X 100mm | 2 |
F1-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***07 | Bolt | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F1-1-1 Axle Assembly,Drive, 3 Piece Pin Mounted, Steering (453/33300)
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-1-12 Axle Arm & Wheel Hub, 458/M0550 Assembly
| 13***09 | Screw | 4 |
| 22***71 | Circlip, External | 2 |
| 22***82 | Circlip | 1 |
F1-8-3 Ram,Sway,Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***8Z | Bolt, 1/2" X 3.3/4" Long | 1 |
F1-3-5 Wheel Hub & Shaft, Assembly 453/30700, Splined Non-Braked
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-4-1 Knuckle Steering, & Trackrod
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F1-2-1 Differential Assy, Pin Mounted, (453/33300 Axle Issue 6)
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-5-1 Shaft,Drive
| 91***01 | Kit-Spider, 93mm Long, 35mm Bearing Dia; Replaced By 91***02 | 2 |
| 91***02 | Yoke, Centre Joint; Replaced By 91***03, See San07225 | 1 |
| 91***03 | Shaft, Wheel Side; Replaced By 91***01 + 82***94 | 1 |
F1-12-1 Track Rod, Assembly 453/21300
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 45***00 | Rod, Track Assembly, (Cranked) | 1 |
| 80***53 | Bush, 33mm Long, 30mm Od X 25mm Id | 2 |
F1-1-2 Axle Assembly, 453/34820, Sd80 Pin Mounted
| 13***5D | Setscrew | 2 |
| 41***04 | Sealant, Multi-Gasket | 0 |
| 45***02 | Plug, Breather | 1 |
F1-7-1 Ram,Steering, Front Axle, Installation
| 13***5Z | Bolt | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 91***00 | Pin, Pivot, 105mm X 25mm Dia. | 4 |
F1-8-2 Ram,Sway,Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***0Z | Bolt, M12 X 100mm | 2 |
F1-6-1 Axle Breather
| 45***02 | Plug, Breather | 1 |
| 45***03 | Breather, Plastic | 1 |
F1-1-11 Axle Arm & Wheel Hub, 458/M0549 Assembly
| 13***09 | Screw | 4 |
| 22***71 | Circlip, External | 2 |
| 22***82 | Circlip | 1 |
F1-3-6 Wheel Hub & Shaft, Assembly 453/30710, Splined Non-Braked
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-8-1 Rear Axle/Stabiliser, Rams, Installation
| 10***10 | Pin, Pivot | 2 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
F2-3-6 Wheel Hub & Shaft, Assembly 453/30710, Splined Non-Braked
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-1-2 Axle Assembly, 453/34830, Sd80 Pin Mounted
| 13***5D | Setscrew | 2 |
| 41***04 | Sealant, Multi-Gasket | 0 |
| 45***02 | Plug, Breather | 1 |
F2-5-1 Shaft,Drive, Installation
| 82***94 | Circlip, External | 2 |
| 91***01 | Kit-Spider, 93mm Over Caps, 30mm Cap Diameter; San 14311. Superseded By 91***15 Without Gr, Ease Nipples. | 2 |
| 91***01 | Shaft, Axle Side, 926.0mm Long | 1 |
F2-12-1 Track Rod, Assembly 453/21300
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 45***00 | Rod, Track Assembly, (Cranked) | 1 |
| 80***53 | Bush, 33mm Long, 30mm Od X 25mm Id | 2 |
F2-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***07 | Bolt | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-3-5 Wheel Hub & Shaft, Assembly 453/30700, Splined Non-Braked
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-6-1 Ram,Steering, Rear Axle, Installation
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 33***79 | G.A. | 0 |
F2-1-12 Axle Arm & Wheel Hub, 458/M0552 Assembly
| 13***09 | Screw | 4 |
| 22***71 | Circlip, External | 2 |
| 22***82 | Circlip | 1 |
F2-9-1 Remote Greasing, Rear Axle
| 14***01 | Washer, Aluminium | 2 |
| 15***00 | Connector | 2 |
| 33***25 | Bracket, Mount,Grease Pipes | 1 |
F2-4-1 Knuckle,Steering, & Track Rod
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F2-2-1 Differential Assy
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-1-11 Axle Arm & Wheel Hub, 458/M0551 Assembly
| 13***09 | Screw | 4 |
| 22***71 | Circlip, External | 2 |
| 22***82 | Circlip | 1 |
F2-1-1 Axle Assembly, Drive Steering, Pivot Mounted (448/56060)
| 13***0Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F3-1-20 Drive Shaft, Universal, Joints (Spider Kits)
| 91***02 | Kit-Spider | 1 |
| 91***03 | Kit-Spider, 82mm Over Caps, 27mm Dia. | 1 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 1 |
F3-3-1 Wheels & Tires, 506
| 15***01 | Valve | 1 |
| 15***79 | Wheel, Assembly.1300-24 14pr, Galaxy Super Grader | 1 |
| 33***61 | Sealant, Tire,Multi-Seal, Heavy Duty | 0 |
F3-3-6 Wheels & Tires, Sales Special-Silver
| 15***01 | Valve, 115 Deg | 1 |
| 33***26 | Wheel, Assembly,Galaxy Giraffe, 17.5-25 16ply,Silver | 1 |
| 33***54 | Wheel, 14x25/1.3 20 Outset, Silver | 1 |
F3-3-2 Wheels & Tires, 510
| 15***01 | Valve, 115 Deg | 1 |
| 33***87 | Tyre, 17.5x25,16pr L2, Galaxy Giraffe | 1 |
| 33***26 | Wheel, Assembly,17.5x25 16pr, Galaxy Giraffe | 1 |
F3-4-1 Tire Labels, For Foam & Sealant
| 33***53 | Label, Foam Tires | 1 |
| 33***55 | Label, Sealant Tires | 1 |
F3-1-1 Propshafts, Ps750 Transmission
| 11***25 | Strap | 6 |
| 33***78 | Propshaft, 570mm Closed Crs. | 1 |
| 33***60 | Propshaft, 1050 Closed Crs. | 1 |
F3-1-2 Propshafts, Ps750 Transmission
| 11***25 | Strap | 6 |
| 33***78 | Propshaft, 570mm Closed Crs. | 1 |
| 33***79 | Propshaft, 1130mm Closed Crs. | 1 |
F3-3-4 Wheels & Tires, 507 509
| 15***01 | Valve | 1 |
| 33***61 | Sealant, Tire,Multi-Seal, Heavy Duty | 0 |
| 33***71 | Wheel, Assembly,1400-24 14 Ply, Galaxy Giraffe L2 | 1 |
F3-3-5 Wheels & Tires, Sales Special-Silver
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***70 | Wheel, Assembly,Galaxy Super, 1300-24 14ply,Silver | 1 |
| 33***61 | Sealant, Tire,Multi-Seal, Heavy Duty | 0 |
F5-16-1 455/10660, Bevel Gearbox,, Ps750, 11" T/C
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
F5-8-1 Torque Convertor, Plate & Couplings, Ps750,11"
| 04***00 | Converter, 11" | 1 |
| 04***68 | Kit, Drive Plate | 1 |
| 33***15 | Damper, Vibration | 1 |
F5-0-3 Transmission/Gearbox, Identification
| 45***03 | Transmission, Bevel,Ps750, 4wd Permanent | 1 |
F5-16-5 459/10234 Kit, Bevel Pinion & Gear, Bevel Gearbox
| 45***02 | Carrier, Bevel Bearing | 2 |
| 45***34 | Kit, Bevel Pinion & Gear, Ps750 | 2 |
| 45***47 | Adapter, 11" T/C | 1 |
F5-13-1 Transmission, Mountings
| 13***8Z | Bolt, M16 X 80 | 2 |
| 13***2Z | Bolt, M16 X 120 | 1 |
| 13***4Z | Bolt, M16 X 140 | 1 |
F5-9-1 Dipstick, Transmission,Ps750
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***00 | Nut, Sealastic | 1 |
F5-1-1 455/M0703, Ps750 Transmission, Bevel, Permanent 4wd ,Servo
| 04***00 | Converter, 11" | 1 |
| 04***68 | Kit, Drive Plate | 1 |
| 13***9Z | Screw, M10x35mm | 1 |
F5-2-10 449/13240, Common Components
| 13***8Z | Screw, M8x30 | 14 |
| 13***9Z | Screw, M10x35mm | 11 |
| 13***1Z | Bolt, M8 X 45 | 6 |
F5-10-1 Breather, Ps750
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***05 | Adapter | 1 |
| 32***64 | Breather | 1 |
F5-14-5 Transmission, Oil Cooler
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 2 |
F5-2-1 449/M0704 Gearbox, Ps750 Permanent 4wd
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 25***98 | Valve, Solenoid Assembly | 3 |
| 33***59 | Bracket, Brake Caliper Mount, Hayes Caliper | 1 |
F5-14-1 Transmission, Cooler Hoses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***5Z | Bolt, M12x20 | 1 |
F5-0-1 Transmission/Gearbox, Layout Ps750
| 13***1Z | Bolt, M12 X 45 | 2 |
| 14***9Z | Washer | 2 |
| 44***03 | Cover, Flywheel Housing, 110mm X 79mm X 17mm | 1 |
G Brakes
G1-2-1 Master Cylinder
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***2D | Nut, Thin | 1 |
G1-5-1 Brake Hoses & Pipes, Installation, Chassis,Servo
| 12***95 | Clip, Harness Support | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***4Z | Washer, Star | 1 |
G1-2-2 Master Cylinder
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt, M10 X 35mm Long | 3 |
| 13***2D | Nut, Thin | 1 |
G1-1-2 Servo Brake, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Bolt, M8 X 35mm | 2 |
| 13***1Z | Bolt, M8 X 45 | 2 |
G1-4-1 Brake Reservoir
| 12***56 | Cover, Brake Reservoir | 1 |
| 13***0D | Setscrew | 2 |
| 14***6D | Washer, M6 Plain | 2 |
G1-3-1 Brake Pedal
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***2D | Washer, Plain | 1 |
G1-1-1 Brake System,Servo, Installation
G1-6-1 Servo Brake
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 15***55 | Brake, Remote Servo | 1 |
V Jcb444 Engine Installation, Components
V41-3-1 Engine Assembly, 320/40124,114bhp Mt3, See Catalogue 9812/2350
| 32***24 | Engine, Complete 74k 12v, Tca Mechtier 3 Voith | 1 |
| 33***00 | G.A, Engine Build 85kw, Mt3 Non-Reversing | 1 |
| 33***85 | I.A, Engine Assembly Mt3, 85kw | 1 |
V41-1-1 Engine Assembly, 320/40216,84bhp Mt3, See Catalogue 9812/2350
| 32***16 | Engine, Complete 63kw 12v, Tc Mech Tier 3 Fh2 Voith | 1 |
| 33***00 | G.A, Engine Build 63kw, Tier 3 Mech | 1 |
| 33***63 | I.A, Engine Assembly Mt3, 63kw | 1 |
V41-2-1 Engine Assembly, 320/40201,99bhp Mt3, See Catalogue 9812/2350
| 32***01 | Engine, Complete 74kw 12v, Tca Mech Tier 3 Fh2 Voith | 1 |
| 33***00 | G.A, Engine Build 74kw, Tier 3 | 1 |
| 33***74 | Engine, Assembly Mt3, 74kw | 1 |
V42-1-1 Engine Mounting, Bolts
| 13***9Z | Bolt; Replaces 60***09 | 7 |
| 13***4Z | Bolt | 3 |
| 13***9Z | Capscrew, M10 X 35mm | 1 |
V43-1-1 Filter,Air,Turbo
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 32***03 | Valve, Dust | 1 |
V43-11-1 Filter Minder
| 13***3Z | Screw | 2 |
| 13***3Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
V44-13-1 Air Induction Hoses, Aspirator Option, Turbo Mt3
| 13***5Z | Bolt | 2 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
V44-1-1 Air Induction Hoses, Turbo
| 16***74 | Adapter, Vacuum Sensor | 1 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
| 22***15 | Clip, Jubilee | 2 |
V45-1-1 Exhaust System, Turbo
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
V46-3-1 Guard, Alternator Belt
| 13***5Z | Bolt | 5 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
V46-1-1 Radiator, Fittings & Mountings, Mt3
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
V48-1-1 Radiator & Hoses, Mt3
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***7Z | Screw, M10 X 25 | 2 |
V48-11-2 Charge Air Cooler
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***11 | Clip, Jubilee | 3 |
V48-11-1 Charge Air Cooler, Installation Mt3
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***11 | Clip, Jubilee | 1 |
V50-1-1 Fuel Pipes, Fuel Tank To Filter
| 13***9Z | Bolt, M10 X 35 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 7 |
V51-1-1 Filter, Fuel Sediment
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
| 32***08 | Bowl, Assembly | 1 |
V55-1-1 Oil Level Dipstick, & Tube (Long) Mt3
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
| 13***3Z | Screw, Star Drive, M8 X 16 | 1 |
| 32***27 | O Ring | 1 |
V58-1-1 Oil Breather Hose, Ccv Filter Mt3
| 22***07 | Clip, Jubilee | 1 |
| 26***00 | Clip | 1 |
| 33***44 | Hose, Engine Breather, Vent To Atmosphere | 1 |
510-56 serial number reference
Locate the machine identification plate on the main chassis near the operator’s cab or on the frame under the loader arm. Confirm applicability with a JCB dealer using the specific serial number found on the plate.
| Prefix | Identifies | Notes |
|---|---|---|
| 01403000 - 01404999 | Applicability: JCB 510-56 covered by Service Manual the OEM part reference-08 & the OEM part reference-2. | |
| 02083497 - 02084497 | Applicability: JCB 510-56 covered by Service Manual the OEM part reference-08 & the OEM part reference-2. | |
| 02144565 - 02149565 | Applicability: JCB 510-56 covered by Service Manual the OEM part reference-08 & the OEM part reference-2. | |
| 02173052 - 02183052 | Applicability: JCB 510-56 covered by Service Manual the OEM part reference-08 & the OEM part reference-2. | |
| 1402000 - 1402919 | Applicability: JCB 510-56 covered by Service Manual the OEM part reference & the OEM part reference. | |
| 1185012 - 1185015 | Applicability: JCB 510-56 covered by Service Manual the OEM part reference & the OEM part reference. | |
| 2433101 onwards | Applicability: JCB 510-56 covered by Service Manual the OEM part reference & the OEM part reference. |
Frequently asked questions
What engine does the JCB 510-56 use?
It uses a JCB EcoMAX 4.4-liter, 4-cylinder turbocharged diesel engine producing 109 hp (81 kW) at 2,200 rpm and 377 ft-lb (511 Nm) of torque at 1,300 rpm, meeting Tier 4 Final / EU Stage V emissions standards.
What is the operating weight of the JCB 510-56?
The operating weight is approximately 29,900 lb (13,560 kg), varying slightly by configuration and attachment package.
What model replaced the JCB 510-56?
The provided sources do not specify a direct successor model for the JCB 510-56.
What 510-56 owners discuss
What engine powers the JCB 510-56, and what are the known quirks regarding parts availability and maintenance?
The JCB 510-56 is powered by a JCB 4.4 EcoMAX engine. While some sources cite a Cummins 6.7L, the primary consensus identifies the EcoMAX platform. A significant operational quirk is parts availability; the engine is discontinued, and JCB does not sell a complete overhaul kit. Mechanics must order individual components piece-by-piece from dealers, which can be difficult for independent technicians. The first engine oil change is required after 100 hours of operation to prevent glazing, as new engines do not require a running-in period.
What are the common electrical and sensor faults reported for this model?
Common faults include error code S049, indicating an open circuit in the boom extension proximity sensor, and Z111, indicating full error logs. The S049 fault is frequently caused by the proximity sensor being too close to the boom surface due to worn boom pads or a bent bracket, rather than a sensor failure. Another electrical issue involves the outriggers; an alarm buzz with no error codes often points to a sensor needing recalibration or a lock-out switch fault rather than a hydraulic failure.
What hydraulic and transmission behaviors are typical for the JCB 510-56?
The machine uses a hydrostatic powershift transmission. A known behavior is power loss in higher gears (3rd and 4th) after the machine heats up, where the operator may only reach 7 mph despite maxed RPM. Hydraulic issues often stem from air trapped in the system or incorrect fluid; one reported incident involved hydraulic oil being mistakenly added to the DEF tank. The system uses a sealed-for-life SCR system, eliminating DPF regeneration downtime.
What are the typical wear patterns and undercarriage considerations for this telehandler?
The machine operates on a one-piece fully welded chassis. Undercarriage wear is influenced by the use of 17.5-25 deep-tread tires, which are necessary for navigating dirt, grass, and gravel. Boom extension sensors are subject to wear from proximity to the sliding boom sections; shimming or adjusting the sensor bracket is a common maintenance task to prevent false open-circuit errors.
What are the common fuel system issues that cause start failures?
Start failures are often caused by air trapped in the high-pressure fuel lines after line replacement or by injector line cracks. The engine features mechanical injection with high-pressure lines leading to each injector. If fuel dribbles rather than sprays when loosening a line at the rocker cover, air is likely trapped. Cleaning the fuel tank of water and mud is also a frequent requirement for machines with high hour counts.
What fluid specifications and capacities are documented for the JCB 510-56?
Engine oil capacity is 2.6 gallons (10 liters). Coolant capacity is 4.6 gallons (18 liters), requiring a 55% antifreeze mixture for protection down to -36° C (-33° F). Transmission fluid is JCB Special Transmission Fluid. Hydraulic system capacity varies by configuration but requires filling with all rams closed while monitoring the sight glass. Hub reductions and differentials use JCB Special Gear Oil.
What specific items should be checked when buying a used JCB 510-56?
Verify the boom extension proximity sensor (S049 code) for proper spacing and bracket integrity. Check for error code Z111 (full memory) which may require clearing. Inspect the fuel tank for water and mud contamination. Confirm the engine is the 4.4 EcoMAX and not a different variant. Check the transmission for power loss in higher gears when hot. Verify the DEF fluid level and system integrity, as confusion with hydraulic oil is a known risk. Have your dealer verify the exact serial range specifications and current parts availability for the discontinued engine.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 510-56 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.