JCBconstructiontelescopic handlers (loadall)
Jcb 507-42
Maintenance schedule, common problems & OEM parts breakdown
The JCB 507-42 is a high-boom telescopic handler (telehandler) in the Loadall family, designed for construction and material handling applications. It features a Tier 4 Final JCB EcoMAX engine producing 74 hp (55 kW). The machine offers a maximum lift capacity of 7,000 lb (3,175 kg) and a maximum lift height of 42 ft (12.8 m). Operating weight ranges from approximately 21,300 lb to 22,000 lb depending on configuration. Production years include models from 2012 onward. It succeeds earlier 500-series Loadall models and is part of the broader JCB telehandler lineage. Configurations include fully glazed cabs, canopies, and various boom lengths.
Across generations, the 507-42 transitioned from Tier 3 to Tier 4 Final compliance, eliminating the need for Diesel Exhaust Fluid (DEF) and Diesel Particulate Filters (DPF) through its sealed SCR system. This change simplified maintenance and reduced operational downtime. The machine remains significant in the used and parts market due to its durable inverted U-shaped boom, one-piece welded chassis, and long service intervals. Its popularity in the rental market ensures a steady supply of used units and readily available replacement parts.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 507-42 specifications
Engine
| Model | JCB EcoMAX |
| Gross/Net Power | 74 hp (55 kW) |
| Displacement | Not documented for this exact serial range — verify with your dealer |
| Cylinders | Not documented for this exact serial range — verify with your dealer |
| Emissions Tier | Tier 4 Final |
Weights
| Operating Weight | 14,330 lb (6,500 kg) approx. to 21,300 lb (9,661 kg) varies by configuration/series |
| Shipping Weight | 22,000 lb (9,979 kg) approx. |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 6.48 m (21 ft 3 in) to 255.0 in (6.48 m) varies by configuration/series |
| Transport Width | 2.39 m (7 ft 10 in) to 94.0 in (2.39 m) varies by configuration/series |
| Transport Height | 2.53 m (8 ft 3 in) to 99.0 in (2.52 m) varies by configuration/series |
| Wheelbase | 124.0 in (3.15 m) |
| Ground Clearance | 381 mm (15 in) to 16.0 in (0.41 m) varies by configuration/series |
| Other Class-Relevant Dimensions | Outside Turning Radius: 13 ft 162 in (4.11 m) to 165.0 in (4.19 m) varies by configuration/series; Maximum Forward Reach: 8.7 m (28 ft 6 in) at ground level |
Performance
| Travel Speeds | 25 km/h (15.5 mph) |
| Class-Relevant Performance Figures | Maximum Lift Capacity: 3,175 kg (7,000 lb); Maximum Lift Height: 12.8 m (42 ft) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service Capacities (Summary)
| Fuel Tank | 117 L (31 gal) |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
507-42 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 12.5-15 liter (3.3-4.0 US gal) | JCB-approved engine oil; viscosity varies by climate (refer to operation and maintenance manual for specific grade based on ambient temperature) |
| Cooling system | 12.5-15 liter (3.3-4.0 US gal) | JCB-approved coolant mixture; 55% antifreeze concentration provides freeze protection to -36° C (-33 °F) |
| Fuel tank | 117 liter (31 US gal) | Diesel fuel |
| Transmission/powertrain compartments | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Final drives (each) | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system AND tank | Varies by configuration/series; total system capacity depends on equipment being used | JCB-approved hydraulic fluid; fill with all rams closed and use 'MIN' and 'MAX' marks on dipstick for refill levels |
| Axles/differentials | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease (spec only) | N/A | JCB-approved grease for wear pads and grease points/nipples |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 507-42 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 507-42 beyond the schedule
Predictive Maintenance & Fluid Analysis
Perform oil sampling at the 500-hour interval for engine, hydraulic, and axle systems to establish a baseline. Monitor hydraulic oil condition closely as the 507-42 uses a dry lubricant system for wear pads, extending service intervals to 500 hours. Check the air filter restriction indicator regularly; replace the inner element every other outer element change. Inspect the crankcase ventilation filter for sludge buildup. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specifications. Verify coolant concentration annually to prevent corrosion in the one-piece chassis cooling system.
Corrective & Common Repairs
Address boom chain tension regularly to prevent excessive wear on the double boom chain extension system. Inspect the inverted U-shaped boom for stress cracks near the integrated boom nose and one-piece closing plate. Check the side-mounted engine hood hinges and gas-assisted struts for fatigue. Replace drive belts if cracks or fraying are visible. Inspect hydraulic hoses routed through the boom for chafing against the boom structure. Verify the functionality of hose burst check valves on the rams to prevent collapse during hose failure. Check the 3.5-inch color TFT screen for error codes related to the EcoMAX engine.
Overhaul & Rebuild Points
At 2,000 hours, inspect the boom structure and chassis for unauthorized welding or fatigue cracks. Check the swing ring and pivot bolts for proper torque, especially on high-cycle units. Inspect the turbocharger shaft play and wastegate function on the EcoMAX engine. Check injector spray patterns using a diagnostic tool. Inspect the transmission oil for metal debris. Check the brake disc wear and immersed brake condition. Inspect the alternator and starter load capacity. Verify the integrity of the electrophoretic alloy dip coating on the cab for corrosion protection.
Seasonal & Environment Servicing
In cold climates, ensure the coolant mixture is rated for the lowest expected temperature. Check the battery condition as cold weather reduces cranking power. Inspect the cab HVAC system, including the 7-speed fan heater and optional air conditioning, for proper operation. In dusty environments, clean the air filter pre-cleaner more frequently and monitor the vacuum switch. Check the cooling fan airflow direction to ensure it is angled upwards to reduce dust buildup. Inspect the tinted cab glass for clarity and ensure the exterior top door slam latch functions correctly from the outside.
507-42 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 332/C2488 | Filter, Fuel, Assembly | Fuel system service | Check fitment → |
| 320/20172 | Alternator, 14v/95amp, Un-Filtered | Scheduled service item | Check fitment → |
| 30/925759 | Filter, Paper | Scheduled service item | Check fitment → |
| 30/925959 | Filter, Re-Circulation | Scheduled service item | Check fitment → |
| 923/10127 | Filter, Carbon | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
507-42 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 140-70 | Aftertreatment system fault | Malfunction in the exhaust aftertreatment components or sensors | Inspect aftertreatment system components and associated wiring for damage or blockage |
| 5086 | Hydraulic sensor fault or control module communication error | Faulty hydraulic pressure sensor or loose wiring harness connection | Inspect hydraulic pressure sensors and wiring harnesses for damage or loose connections |
| 5084 | Hydraulic sensor fault or control module communication error | Faulty hydraulic pressure sensor or loose wiring harness connection | Inspect hydraulic pressure sensors and wiring harnesses for damage or loose connections |
| D002 | Machine diagnostic code indicating a system fault | Varies by configuration/series; specific cause not detailed in sources | Use diagnostic tool to retrieve detailed description and troubleshoot based on specific system |
| D014 | Machine diagnostic code indicating a system fault | Varies by configuration/series; specific cause not detailed in sources | Use diagnostic tool to retrieve detailed description and troubleshoot based on specific system |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
507-42 attachments & work tools
Forks and Carriers
Standard 66-inch wide carriage with 48-inch pallet forks is included for rated capacity calculations. The machine supports quick-attach systems for rapid tool changes, with auxiliary hydraulic spools fitted as standard to operate various fork-mounted attachments.
Buckets and Grapples
Compatible with standard telehandler buckets and grapples for material handling. Attachment capacity is governed by the machine's load chart; if the attachment rating is lower than the machine's 7,000 lb (3,175 kg) capacity, the lower rating applies.
Work Platforms
Compatible with aerial work platforms for elevated tasks. The platform must be JCB-approved and rated within the machine's load limits to ensure stability and safety compliance.
Hydraulic and Control Configurations
Features auxiliary hydraulic spools as standard to support attachment operation. The machine utilizes a dry lubricant system for wear pads with 500-hour service intervals and includes hose burst check valves on rams to prevent collapse during hose failure.
Safety and Guarding Options
Full cab and canopy options are both ROPS and FOPS certified. Optional front and top screen roof guards are available to increase protection from falling objects. A standard reverse alarm and optional camera system enhance site safety.
Engine and Emissions
Powered by a Tier 4 Final JCB EcoMAX engine producing 74 hp (55 kW). The engine requires no Diesel Exhaust Fluid (DEF) and no Diesel Particulate Filter (DPF), utilizing a sealed-for-life SCR system instead.
All 507-42 assemblies by section
Every catalogued assembly group for the Jcb 507-42. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-20-1 Forks, Carriage,Usa
A3-1-1 Tool Carrier
| 13***9Z | Bolt, M10x90mm | 1 |
| 13***1Z | Bolt, M12x110 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
B Bodywork, Cab, Loader End
B1-14-1 Stabiliser, Installation
| 13***08 | Bolt | 4 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
| 13***1Z | Bolt, M12x110 | 2 |
B1-7-20 Step, Rear
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***1Z | Bolt, M12 X 45mm | 4 |
| 13***1Z | Nut | 8 |
B1-4-4 Fuel Filler Flap
| 13***01 | Nut | 1 |
| 33***02 | G.A., Sa Fuel Filler Flap | 1 |
| 33***03 | Cover, Protection Flap | 1 |
B1-15-4 Counterweight, 510-56
| 13***2Z | Bolt, M24 X 240mm Long | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
B1-15-2 Counterweight, With Recovery Hitch
| 13***7Z | Set, Pin M20 X 25 Lg. | 2 |
| 13***3Z | Bolt, M20 X 2.5 X 130mm | 2 |
| 13***5Z | Bolt | 2 |
B1-8-10 Fenders, 507 509 510
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 16 |
| 13***3Z | Nut, Lock, M10 | 48 |
| 13***3Z | Nut, M12 | 16 |
B1-7-1 Step, Cab Entry, Battery Door
| 12***91 | Washer, Nylon | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 4 |
B1-6-1 Tank,Hydraulic, Fittings
| 12***53 | Gauge, Sight | 1 |
| 13***9Z | Setscrew, M8x35 | 14 |
| 32***00 | Strainer, Suction | 1 |
B1-4-5 Fuel Tank Guard, (Back)
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***5Z | Bolt, M12x20 | 1 |
| 13***8Z | Bolt, M12 X 30 | 2 |
B1-20-1 Chassis Grommets, Location
| 33***76 | Grommet, R45 X 140 | 1 |
| 33***71 | Grommet, R28 X 115 | 1 |
| 33***46 | Grommet, 50mm Dia. | 1 |
B1-1-1 Chassis
| 33***16 | G.A. | 0 |
| 33***31 | Chassis, 506-36 | 1 |
B1-7-10 Safety Strut, Boom
| 33***72 | Decal, Boom,Safety Strut | 1 |
B1-7-21 Step, Rear
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***1Z | Bolt, M12 X 45mm | 2 |
B1-7-17 Safety Strut, Boom
| 33***85 | Strut, Boom | 1 |
| 92***03 | Strip, Sealing | 2 |
B1-1-3 Chassis
| 33***22 | G.A. | 0 |
| 33***70 | Chassis, 510-55 | 1 |
| 33***01 | Chassis, M/C | 1 |
B1-15-3 Counterweight, Under Hyd.Tank
| 13***2Z | Bolt | 4 |
| 14***2Z | Washer, M20 | 4 |
| 33***44 | Counterweight, Cast,(Under Tank) | 1 |
B1-7-12 Safety Strut, Mounting
| 13***1Z | Bolt | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
B1-7-16 Safety Strut, Boom
| 33***85 | Strut, Boom | 1 |
| 92***03 | Strip, Sealing | 2 |
B1-3-10 Front Light Brackets, Mirror Installation, Chassis & Cab Etc
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
B1-2-1 Bodyw0rk, Deck Panels
| 13***8Z | Screw, M8x30 | 6 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***9Z | Screw, M10x35mm | 3 |
B1-1-2 Chassis
| 33***18 | G.A. | 0 |
| 33***20 | G.A. | 0 |
| 33***77 | Chassis, 507,509 | 1 |
B1-3-11 Front Light Brackets, Mirror Installation, Chassis & Cab Etc
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
B1-5-1 Engine Pod,Base, No Access Panel
| 13***7Z | Bolt, M10x25 | 6 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
B1-15-1 Counterweight, Wth Tow Hitch
| 13***2Z | Bolt, M24 X 240mm Long | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
B1-13-2 Noise Quilts, Engine Pod Side, (N.America)
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***02 | G.A., Sa Pod Side Cover | 0 |
B1-3-12 Rear Light Arms, And Brackets
| 12***53 | Washer, Rebound | 2 |
| 13***0Z | Bolt, M10 X 40 | 6 |
| 13***7Z | Bolt | 2 |
B1-8-1 Fenders, 506
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 8 |
| 13***0Z | Bolt, M10 X 100 | 8 |
| 13***3Z | Nut, Lock, M10 | 48 |
B1-4-1 Tank, Diesel Fuel
| 13***5Z | Bolt, M12x20 | 3 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***2Z | Bolt, M12 X 50mm | 2 |
B1-5-11 Engine Pod,Cover, Installation, Non-Noise
| 12***35 | Joint, Ball | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***0Z | Bolt, M8x40 | 4 |
B1-20-2 Chassis Grommets, Location
| 33***75 | Grommet, R15 X 30 | 2 |
| 33***76 | Grommet, R45 X 140 | 1 |
| 33***57 | G.A. | 0 |
B2-4-15 Guards,Roof
| 33***22 | Boot, Rubber | 2 |
| 33***56 | Guard, Wa Roof | 1 |
| 82***29 | Washer, M8 Black | 6 |
B2-5-1 Cab,Internal Parts, Covers,Brackets,Etc
| 16***02 | Vent, Abi Cab Assembly | 1 |
| 16***11 | Mounting, Pressing G.A. | 1 |
| 16***72 | Cab, Trim Panels | 0 |
B2-3-1 Door,Upper
| 33***47 | Hinge, Block, Assembly | 2 |
| 33***48 | Handle, Door | 1 |
| 33***92 | Door, Upper | 1 |
B2-1-2 Canopy, & Side Glass
| 12***40 | Plug, Blanking, 30mm | 6 |
| 16***54 | Strip, Mounting, 20mm X 10mm X 6mm | 1 |
| 33***20 | Plate, Side Cover | 1 |
B2-14-1 Emergency Hammer
| 14***02 | Screw | 2 |
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
B2-9-2 Seat,Adjustable Back, 3"Belt
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
B2-10-5 Sunblind, Roof
| 14***5D | Washer | 2 |
| 33***37 | Hook, Roller Blind | 6 |
| 33***84 | Blind, Roller | 1 |
B2-4-20 Guard,Debris/Mud, Cab Front, Optional
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***4Z | Bolt | 1 |
B2-15-1 Cab Mirror, External
| 12***70 | Mirror, Exterior Head Assembly | 1 |
| 13***3D | Setscrew | 2 |
| 14***6D | Washer, Spring, M6 | 2 |
B2-9-1 Seat, Suspension, Fixed & Adjustable
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
B2-5-2 Canopy, Internal Parts, Covers,Brackets Etc
| 16***03 | Duct, Abi Ga | 1 |
| 16***11 | Mounting, Pressing G.A. | 1 |
| 16***77 | G.A. | 0 |
B2-10-6 No Sun Blind, Construction Build
| 33***45 | Cover, Top | 1 |
| 82***59 | Screw, Button Head Socket, M6 X 16mm | 2 |
B2-2-1 Glazing,Standard
| 16***54 | Strip, Mounting, 20mm X 10mm X 6mm | 4 |
| 33***28 | G.A. | 0 |
| 33***82 | Glass, Rear | 1 |
B2-4-5 Cab/Canopy, Front Covers
| 13***7D | Setscrew, M8x25 | 5 |
| 13***7D | Setscrew, M12 X 25 | 2 |
| 14***3D | Washer, Large | 4 |
B2-3-4 Door,Lower
| 13***3D | Setscrew | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***6D | Washer, M6 Plain | 4 |
B2-4-10 Guards,Windscreen
| 33***57 | Guard, Wa Screen | 1 |
| 82***29 | Washer, M8 Black | 8 |
| 82***41 | Screw, Set, M8 X 25, Black | 4 |
B2-1-30 Gauge,Inclinometer
| 16***95 | Cab, Inclinometer, Assembly | 0 |
| 70***00 | Gauge, Inclinometer/Level | 1 |
B2-4-1 Cab Parts,External
| 12***40 | Plug, Blanking, 30mm | 6 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 81 |
B2-3-5 Door,Lower,Steel
| 13***3D | Setscrew | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***6D | Washer, M6 Plain | 4 |
B2-9-3 Seat,Fixed Back, 3"Belt
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
B2-5-10 Floor Mats
| 12***40 | Plug, Blanking, 7mm | 3 |
| 33***53 | Plate, Kick | 1 |
| 33***45 | Housing, Floor Conduit | 1 |
B2-5-8 Lower Control, Cab/Canopy,Air Vents
| 21***07 | Vent, Air,Rectangular | 2 |
| 33***74 | Vent, Air(76.5mm Dia.Hole) | 5 |
| 33***49 | Moulding, Centre Duct | 1 |
B2-1-1 Cabs
| 12***40 | Plug, Blanking, 30mm | 6 |
| 13***3D | Nut, Self Lock M8 | 8 |
| 14***7D | Washer, M8 Plain | 8 |
B3-6-1 Boom,Pivot Pin, Location
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***48 | Pin, Pivot; Ss 81***29 | 1 |
B3-1-2 Booms, Inner,Intermediate, & Outer (42 Ft.)
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 3 |
B3-4-2 Chain & Roller, Installation(42 Ft.)
| 13***4Z | Bolt, 3/8" | 1 |
| 13***0Z | Bolt | 4 |
| 13***8Z | Bolt | 1 |
B3-8-1 Sensor, Boom
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***2Z | Washer | 4 |
B3-6-5 Boom,Pivot Pin, Location
| 10***30 | Pin, Pivot | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M10x90mm | 1 |
B3-4-5 Chain & Roller, Installation(56 Ft.)
| 13***7Z | Bolt, M10x25 | 3 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
| 13***0Z | Bolt, M12x40 | 2 |
B3-4-1 Chain & Roller, Installation(36 Ft.)
| 13***4Z | Bolt, 3/8" | 1 |
| 13***0Z | Bolt | 4 |
| 13***8Z | Bolt | 1 |
B3-3-1 Indicator, Boom Angle
| 13***1Z | Screw, Hex Head, M8 X 12 | 2 |
| 13***6Z | Bolt, M8 X 70 | 1 |
| 13***1Z | Nut, M8 | 1 |
B3-1-3 Boom, Inner,Inters & Outer
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 3 |
B3-1-1 Booms, Inner,Intermediate, & Outer (36 Ft.)
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 3 |
B3-7-1 Pads,Boom Wear
| 13***7Z | Bolt, M12x25mm Long,Tuf-Lo, K | 11 |
| 13***8Z | Screw, Set M12 X 30 Tuf-Lok | 14 |
| 13***0Z | Screw, Set M12 X 40 Tuf-Lok | 13 |
B3-7-5 Pads,Boom Wear
| 13***7Z | Bolt, M10 X 25mm Tuf-Lok | 36 |
| 13***9Z | Bolt, M10x35 Long,Tuf-Lok | 16 |
| 13***1Z | Setscrew, M10 X 45, Tuf-Lok | 4 |
B5-2-15 Decals, Nomenclature
| 33***12 | Decal, 506-36, Horizontal | 1 |
| 33***35 | Decal, 507-42, Horizontal | 1 |
| 33***36 | Decal, 506-36, Vertical | 2 |
B5-4-5 Fire Extinguisher
| 16***83 | Extinguisher, Fire | 1 |
| 82***83 | Screw, M6 X 25 | 2 |
| 82***35 | M6 Caged Nut | 2 |
B5-2-2 Decals, U.S.A./Canada, Ansi
| 33***07 | Label, Fan Guard-Warning, Ansi | 1 |
| 33***12 | G.A. | 0 |
| 33***42 | Decal, Multi-Warning, Ansi | 1 |
B5-5-1 Flip Charts
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 33***88 | Decal, F/Chart, Controls, 510 | 1 |
B5-2-1 Decals, South America/R-O-W, Iso
| 33***08 | Decal, Warning-Fan Blades, Remove Key From Ign. | 1 |
| 33***07 | G.A. | 0 |
| 33***40 | Decal, Multi Warning, Iso | 1 |
B5-1-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B5-2-10 Decals, Cab Waist Band
| 33***55 | Decal, Rear Axle Stabilizat, Ion | 1 |
| 33***59 | G.A. | 0 |
| 33***17 | G.A. | 0 |
C Electrics-Machine, Cab & Engine
C1-9-1 Battery 12v, Carrier
| 13***9D | Screw, M12x35mm Long | 4 |
| 14***1D | Washer | 2 |
| 14***9D | Washer, M12 | 4 |
C1-1-2 Electrics, Chassis Harness Etc., 510
| 13***3Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
| 33***76 | Harness, Rear Lamp | 1 |
C1-3-15 Boom, Proximity Switch
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***2Z | Washer | 4 |
C1-4-1 Light Head, Lh Dip,Clear
| 13***1Z | Nut | 1 |
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
C1-3-10 Stabiliser Harness, Abi
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 14***1Z | Washer, M16 Plain | 4 |
| 33***09 | Harness, Stabiliser Link | 1 |
C1-3-5 Stabiliser Harness, Rh, Installation
| 33***62 | Harness, Stabiliser Abi | 1 |
| 33***44 | Cover, Wa,Rh | 1 |
| 33***47 | Guard, Ram Rh | 1 |
C1-16-1 Alarm, Reverse
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 4 |
| 71***14 | Plug, Male,8 Way, Deutsch | 1 |
C1-3-6 Stabiliser Harness, Lh, Installation
| 33***02 | Cover, Wa,Lh | 1 |
| 33***60 | Guard, Ram Lh | 1 |
| 33***62 | Harness, Stabiliser Abi | 1 |
C1-1-1 Electrics, Chassis Harness Etc., 506,507,509
| 33***76 | Harness, Rear Lamp | 1 |
| 33***55 | G.A. | 0 |
| 33***87 | Harness, Chassis, 506 507 509 | 1 |
C1-6-1 Fusebox, Primary
| 16***77 | G.A. | 0 |
| 71***00 | Maxi Fuse 60amp | 1 |
| 71***77 | Box, Fuselink, Plug 72***09, 72***08, Terminal 72***78 | 1 |
C1-8-1 Earthing, Engine/Chassis
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 16***63 | G.A. | 0 |
C1-4-2 Light,Head, Rh Dip,Clear
| 13***1Z | Nut | 1 |
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
C1-11-1 Light, Reflector
| 14***02 | Screw, No 8x1/2" | 3 |
| 33***85 | G.A. | 0 |
| 70***00 | Reflector, Amber | 3 |
C1-10-2 Light,Rear, Combination,Rh Dip, Reverse & Fog
| 33***88 | G.A. | 0 |
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
C1-9-10 Battery Isolator
| 33***33 | Label, Battery Isolator | 1 |
| 70***00 | Switch, Isolator 150a 24v Dc, (Supplied Cpl With Key 70***01) | 1 |
| 82***29 | Washer, M8 Black | 2 |
C1-10-3 Light,Rear, Combination,Lh Dip, Reverse & Fog
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
| 70***74 | Lens, Reverse | 1 |
C1-3-1 Stabiliser Electrics
| 13***08 | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
| 14***3D | Washer, Large | 4 |
C1-10-1 Light,Rear, Combination, Twin Reverse
| 33***83 | G.A. | 0 |
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
| 70***73 | Lens, Amber, Direction Indicator | 2 |
C2-3-1 Starter Motor, 12.Volt
| 13***8Z | Screw, Star Drive, M10 X 30 | 3 |
| 32***35 | Motor, Starter | 1 |
| 32***52 | Motor, Starter | 1 |
C2-1-1 Switches & Senders, 12volt Mt3
| 17***02 | Seal, Ring | 1 |
| 32***38 | Switch, Engine Oil Pressure | 1 |
| 32***57 | Seal, Bonded | 1 |
C2-4-1 Alternator, 14volt - 95amp
| 13***8Z | Bolt, M10 X 30, Flange Reduced Hex | 1 |
| 13***2Z | Bolt, M10 X 120, Flange Reduced Hex | 1 |
| 32***10 | Alternator, 14v-95amp | 1 |
C2-2-1 Engine Harness, Installation Mt3
| 12***47 | Clip, Cable | 4 |
| 24***07 | Grommet | 4 |
| 26***00 | Clip, Harness | 3 |
C2-7-1 Engine Block Heater, 120v
| 16***79 | G.A, Engine Block Heater | 1 |
| 32***50 | Heater, Cylinder Block, 1000w - 120v Mains | 1 |
| 32***53 | Washer, Copper Sealing | 1 |
C2-5-2 Grid Heater Relay, Installation Mt3, Charge Air Cooled Builds
| 12***95 | Clip, Harness Support | 1 |
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
C2-5-1 Grid Heater Relay, Installation Mt3
| 13***5Z | Bolt | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***7Z | Bolt, M8 X 25, Flange Reduced Hex | 1 |
C3-1-5 Electrics, Cab, Harnesses & Fittings, 506,507,509
| 13***3Z | Screw | 2 |
| 13***1Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
C3-16-6 Air-Con,Condenser
| 12***91 | Washer, Nylon | 8 |
| 12***55 | Handle | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
C3-9-9 Steel Roof Liner, With Interior Light, With Speakers
| 33***30 | Plate, Steel Headliner | 1 |
| 33***91 | G.A. | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
C3-9-8 Steel Roof Liner, With Interior Light, Canopy
| 33***58 | Plate, Wa Steel Head Liner | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 82***60 | Screw, Button Head, M6x25 | 3 |
C3-1-6 Electrics, Cab, Harnesses & Fittings, 510
| 13***3Z | Screw | 2 |
| 13***1Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
C3-16-1 Air Con Heater Unit
| 13***8D | Setscrew, M8 X 30mm | 3 |
| 14***7D | Washer, M8 Plain | 3 |
| 14***7D | Washer, M8 Spring | 3 |
C3-9-1 Worklights, Front
| 33***83 | G.A. | 0 |
| 70***45 | Light, Working,Lh | 1 |
| 70***46 | Light, Working,Rh | 1 |
C3-2-15 Washer Bottle
| 13***1D | Screw, M6x45 | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 14***1D | Washer, Large | 2 |
C3-16-3 Air-Con Installation
| 33***19 | G.A. | 0 |
| 82***92 | Tie, Cable | 2 |
C3-2-10 Roof Wiper
| 15***00 | Connector, 'T' Piece | 1 |
| 23***15 | Motor, Assembly, Wiper | 1 |
| 24***03 | Grommet | 1 |
C3-16-7 Air Con Heater Unit
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***8Z | Screw, M8x30 | 3 |
| 14***1D | Washer, 1/4" Medium | 2 |
C3-25-1 Aux Speed Sensor
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***1Z | Nut, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C3-17-7 Heater A/C Unit
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 14***1D | Washer, 1/4" Medium | 2 |
C3-1-1 Cab, Internal Layout, Switches & Instruments
| 33***74 | Plate, Warning Light | 1 |
| 33***79 | Plate, Radio,Blank-Din 1 | 1 |
| 33***14 | Plate, Switch,Lh | 1 |
C3-2-1 Front Wiper, Single Speed
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 32***76 | Filter, Washer Pump | 1 |
C3-16-2 Air-Con Heater, Circuit
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
C3-9-2 Worklights, Rear
| 33***69 | G.A. | 0 |
| 33***20 | Harness, Rear Worklight | 1 |
| 70***45 | Light, Working,Lh | 1 |
C3-2-20 No Wipers
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 24***08 | Grommet, Blind | 2 |
| 71***02 | Plug, 4 Way | 2 |
C3-10-1 Radio Harness, & Aerial
| 13***3D | Nut, Self Lock M10 | 1 |
| 14***8D | Washer, M10 | 1 |
| 16***78 | G.A. | 0 |
C3-17-2 Heater Circuit
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
C3-3-1 Relays & Fuses
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***80 | Plate, Relay Mounting | 1 |
C3-2-6 Rear Wiper
| 25***03 | Jet, Screen Washer | 1 |
| 32***76 | Filter, Washer Pump | 1 |
| 34***17 | Cover, Wiper Motor | 1 |
C3-12-2 Beacon,Rotating, Amber,Hazard Warning
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
| 70***00 | Beacon, 12v, (155mm Tall) | 1 |
C3-30-2 Immobiliser Key Pad, Cab & Canopy
| 13***9D | Setscrew | 2 |
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
C3-17-1 Heater
| 13***8D | Setscrew, M8 X 30mm | 3 |
| 14***7D | Washer, M8 Plain | 3 |
| 14***7D | Washer, M8 Spring | 3 |
C3-30-1 Immobiliser Key
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
C3-12-3 Beacon,Strobe, Hazard Warning
| 70***01 | Lens, Amber | 1 |
| 70***00 | Beacon, Warning-Strobe, Amber; San26024.Ss To 70***42. Ref A Weir/Britax., Pg 31/03***08 | 1 |
C3-4-1 Switch,Column
| 11***58 | Gaiter, Column Switch | 1 |
| 12***58 | Plate, Retainer | 1 |
| 13***5Z | Screw, M5 X 20 | 2 |
C3-18-1 Fan,Cab Cooling, Optional
| 33***12 | Plate, Fan Retainer | 1 |
| 71***06 | Fuse, 15 Amp, Fuse, 15 Amp; C3 - Thermostart. On Fastrac 185ti From M636--- - Provides Ether Start Circuit Protection. | 1 |
| 71***00 | Fan, 12 Volt; Replaced By 71***40, See San 10523 | 1 |
C3-16-5 Receiver Drier, Air-Con
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 16***73 | G.A. | 0 |
C3-19-1 Electrics, Rear Axle Stabiliser, Option
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
C3-25-2 Speed Sensor, Without Spacer
| 41***00 | Fluid, Locking | 1 |
| 71***34 | Sensor, Gear Tooth, Deutsch Connector | 1 |
| 82***92 | Screw | 1 |
C3-16-4 Air-Con Hoses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 33***54 | G.A. | 0 |
| 33***43 | Hose, Air-Con | 1 |
C3-17-3 Heater Installation
| 24***07 | Grommet, Blind, 17.5mm Dia. | 1 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 1 |
| 33***82 | G.A. | 0 |
C3-8-1 Horn,Single Tone
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
D Controls-Machine, Engine & Steering
D1-4-10 Control Levers, Auxiliary & Sway
| 13***2Z | Nut, M8 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
| 16***92 | Rod, Control Assembly | 2 |
D1-2-1 Parking Brake, Control,Ps750
| 13***8Z | Screw, M8x30 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***6Z | Washer, M6 | 1 |
D1-5-1 Control Levers, Servo
D1-4-15 Control Rods, Auxiliary & Sway
| 13***2Z | Nut, M8 | 2 |
| 21***04 | Pin, Clevis | 2 |
| 21***05 | Pin, Split | 2 |
D1-4-5 Controls, Auxiliary & Sway
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***04 | Gaiter | 2 |
D1-4-6 Controls, Auxiliary & Sway
| 13***7Z | Bolt, High Strength; Replaces 60***07,60***7r | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***04 | Gaiter | 2 |
D1-4-1 Control Levers, Stabiliser
| 16***49 | Gaiter, Twin Lever | 1 |
| 16***80 | Plate, Gaiter Clamp | 1 |
| 25***14 | Knob | 2 |
D1-4-16 Control Rods, Auxiliary & Sway
| 13***2Z | Nut, M8 | 2 |
| 21***04 | Pin, Clevis | 2 |
| 21***05 | Pin, Split | 2 |
D2-1-1 Control,Throttle
| 13***7D | Setscrew M5x25 | 1 |
| 13***3D | Setscrew | 3 |
| 13***2D | Bolt | 4 |
D3-1-1 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 16***61 | Bearing, Thrust Assembly | 1 |
D3-2-1 Steering Column, Covers
| 13***0Z | Setscrew, M5x10mm | 2 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 14***1Z | Washer, 2 Ba | 4 |
E Hydraulics & Air Including, Steering
E1-5-1 Circuit,Steering
| 13***0Z | Bolt | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 16***50 | Adaptor | 1 |
E1-10-1 Circuit, Sway Hydraulics
| 13***8Z | Bolt | 2 |
| 13***9Z | Bolt, M8 X 35mm | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 5 |
E1-13-1 Circuit,Cooling Fan, Non-Reversing Mt3, 84.5bhp/99bhp Engine Builds
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 8 |
E1-2-2 Circuit, Lift End
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-2-10 Circuit, Inner Boom
| 13***7Z | Screw, Hexagon M8 X 25 | 5 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***8Z | Bolt, M8x80mm Long | 7 |
E1-11-1 Circuit, Stabiliser-Rear Axle, Hydraulics
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E1-5-2 Circuit,Steering
| 13***0Z | Bolt | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 16***50 | Adaptor | 1 |
E1-1-5 Circuit,Neutral, 3 Stage Pump, With Rear Axle Stabiliser
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 8 |
| 24***05 | O Ring | 1 |
E1-50-1 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-2-1 Circuit, Lift End
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-11-5 Circuit, Stabiliser-Front, Hydraulics
| 33***42 | G.A. | 0 |
| 33***18 | Hose, 3/8"Bsp 4100mm | 4 |
| 33***45 | Hose, 595mm | 4 |
E1-6-1 Circuit, Servo Pilot Controls, Hoses
| 33***75 | G.A. | 0 |
| 61***00 | Hose, Straight-Elbow | 1 |
| 61***00 | Hose, 1/4"Bsp X 600mm | 3 |
E1-2-3 Circuit, Lift End
| 13***0Z | Bolt, M6 X 40mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-1-1 Circuit,Neutral, 3 Stage Pump
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 8 |
| 24***05 | O Ring | 1 |
E1-6-2 Circuit, Servo Pilot Controls, Hoses
| 33***81 | G.A. | 0 |
| 61***00 | Hose, Straight-Elbow | 1 |
| 61***00 | Hose, 1/4"Bsp X 600mm | 3 |
E2-5-1 Motor,Fan Drive, Non-Reversing Mt3, 84.5bhp Engine
| 33***71 | Motor, Fan | 1 |
| 33***03 | Fan, Motor 16cc-Rev 7 | 1 |
E2-5-2 Motor,Fan Drive, Non-Reversing Mt3, 99bhp & 114bhp Engines
| 33***35 | Motor, Fan Bi-Directional | 1 |
| 33***68 | Motor, Fan | 1 |
E2-1-1 Pump,Three Stage, Main Hydraulics, 110 L/Min
| 20***88 | Pump, Main.3 Stage, Supp No 7029530008 | 1 |
| 35***98 | Valve, Priority Steer | 1 |
| 98***61 | Kit, Seal | 1 |
E2-2-1 Pump,(Three Stage), Main Hydraulics, Fittings & Mountings (110 L/Min)
| 13***8Z | Bolt | 4 |
| 14***8Z | Washer, Spring | 4 |
| 16***50 | Adaptor | 1 |
E3-14-2 Pilot Controls, & Installation
E3-15-5 Valve,Servo,2 Axis, Adapters & Mounting
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 6 |
E3-16-2 Valve,Pilot, Adapters & Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 5 |
E3-2-1 Valve, Aux/Sway, Adapters & Mounting
| 13***9Z | Screw, M10x35mm | 2 |
| 13***15 | Screw | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
E3-4-1 Steer,Valve, Without Shock Valves
| 33***13 | G.A. | 0 |
| 33***65 | G.A. | 0 |
| 35***08 | Kit-Seal | 1 |
E3-16-1 Valve,Pilot, Adapters & Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 3 |
E3-7-1 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 32***46 | Element, Hydraulic Filter, 12 Micron,229mm Long | 1 |
| 32***01 | Element, Hydraulic Filter, 5 Micron 254 Long | 1 |
E3-15-1 Valve,Servo,1 Axis, Adapters & Mounting
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
E3-14-1 Pilot Controls, & Installation
E3-7-5 Filter, Hydraulic, Hpa Mini Filter
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
E3-2-3 Valve, Aux/Sway/Stab, Adapters & Mounting
| 13***9Z | Screw, M10x35mm | 2 |
| 13***15 | Screw | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
E3-13-1 Valve, Regenerative
| 25***01 | Kit-Repair | 1 |
| 25***02 | Ring, Back Up | 1 |
| 25***03 | Ring, 'O' | 1 |
E3-6-2 Steer Mode Valve, Manual,C/W Cable
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***2Z | Nut, Lock | 1 |
E3-1-1 Valve,Main Control, Adapters & Mounting
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 3 |
E3-4-2 Valve,Steering
| 33***09 | G.A. | 0 |
| 35***08 | Kit-Seal | 1 |
| 35***02 | Kit, Bearing; San 22117.Made Nla On The Request Of R Bryant, 09/12***05. P Gamble | 1 |
E3-2-2 Valve, Aux/Sway, Adapters & Mounting
| 13***9Z | Screw, M10x35mm | 2 |
| 13***15 | Screw | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
E3-6-1 Steer Mode Valve, Manual,, Fittings And Lever
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 13***2Z | Nut, Lock | 1 |
E4-5-1 Ram,Sway
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 23***55 | O Ring | 1 |
E4-6-3 Ram,Extension
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***8D | Capscrew, Socket Head, M10 X 80mm | 4 |
E4-2-1 Ram,Tilt
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-8-2 Ram,Stabiliser,Rh, Front
| 12***71 | Clip | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
| 14***11 | Seal, Bonded | 1 |
E4-7-1 Ram, Stabiliser R.H., Rear Axle
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 23***55 | O Ring | 1 |
E4-7-2 Ram, Stabiliser L.H., Rear Axle
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 15***22 | Spacer | 1 |
| 23***55 | O Ring | 1 |
E4-1-1 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-1-2 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-8-1 Ram, Stabiliser R.H., Front
| 12***71 | Clip | 2 |
| 13***7Z | Bolt, M10x25 | 4 |
| 14***11 | Seal, Bonded | 1 |
E4-3-1 Ram Steering, Front & Rear Axles
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***06 | O Ring | 1 |
E4-1-3 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-1-4 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-4-1 Ram,Displacement
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-6-6 Ram, Extension
| 13***18 | Capscrew, M10 X 80 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 16***07 | Adapter | 2 |
E4-6-5 Ram,Extension
| 13***8D | Capscrew, Socket Head, M10 X 80mm | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***07 | Adapter | 2 |
E4-6-1 Ram,Extension
| 12***24 | Bush, Spring Steel | 1 |
| 12***21 | Bush | 1 |
| 13***8D | Capscrew, Socket Head, M10 X 80mm | 4 |
E4-3-5 Ram.Steering, Front & Rear Axles
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***07 | Nipple, Grease, 45 Deg. Angle | 1 |
| 23***07 | O Ring | 1 |
E4-1-7 Ram,Lift
| 12***19 | Bush, Spring | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F Axles, Wheels & Transmission
F1-4-1 Knuckle Steering, & Trackrod
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F1-8-1 Ram,Sway,Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***0Z | Bolt, M12 X 100mm | 2 |
F1-1-2 Axle Assembly, 453/34820, Sd80 Pin Mounted
| 13***5D | Setscrew | 2 |
| 41***04 | Sealant, Multi-Gasket | 0 |
| 45***02 | Plug, Breather | 1 |
F1-12-1 Track Rod, Assembly 453/21300
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 45***00 | Rod, Track Assembly, (Cranked) | 1 |
| 80***53 | Bush, 33mm Long, 30mm Od X 25mm Id | 2 |
F1-1-1 Axle Assembly,Drive, 3 Piece Pin Mounted, Steering (453/33300)
| 15***00 | Axle, Lockstop; See Note 1. Use Lockstop 12***25.15***00 Ref Only., Axle, Lockstop; Use Lockstop 12***25. On 525-67 Sway Machines, Axle Lockstops Not Fitted After M564993, Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only, Axle, Lockstop, Axle, Lockstop; See Note 1. Use 12***25. 15***00 Ref Only., Axle, Lockstop; See Note 1. Use 12***25.15***00 Ref Only. | 2 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F1-7-1 Ram,Steering, Front Axle, Installation
| 13***5Z | Bolt | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 91***00 | Pin, Pivot, 105mm X 25mm Dia. | 4 |
F1-5-1 Shaft,Drive
| 91***01 | Kit-Spider, 93mm Long, 35mm Bearing Dia; Replaced By 91***02 | 2 |
| 91***02 | Yoke, Centre Joint; Replaced By 91***03, See San07225 | 1 |
| 91***03 | Shaft, Wheel Side; Replaced By 91***01 + 82***94 | 1 |
F1-3-6 Wheel Hub & Shaft, Assembly 453/30710, Splined Non-Braked
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-1-12 Axle Arm & Wheel Hub, 458/M0550 Assembly
| 13***09 | Screw | 4 |
| 22***71 | Circlip, External | 2 |
| 22***82 | Circlip | 1 |
F1-1-11 Axle Arm & Wheel Hub, 458/M0549 Assembly
| 13***09 | Screw | 4 |
| 22***71 | Circlip, External | 2 |
| 22***82 | Circlip | 1 |
F1-2-1 Differential Assy, Pin Mounted, (453/33300 Axle Issue 6)
| 13***18 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***07 | Bolt | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F1-6-1 Axle Breather
| 45***02 | Plug, Breather | 1 |
| 45***03 | Breather, Plastic | 1 |
F1-8-2 Ram,Sway,Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***0Z | Bolt, M12 X 100mm | 2 |
F1-8-3 Ram,Sway,Front Axle, Installation
| 10***10 | Pin, Pivot | 1 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***8Z | Bolt, 1/2" X 3.3/4" Long | 1 |
F1-3-5 Wheel Hub & Shaft, Assembly 453/30700, Splined Non-Braked
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-1-1 Axle Assembly, Drive Steering, Pivot Mounted (448/56060)
| 13***0Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-4-1 Knuckle,Steering, & Track Rod
| 13***5Z | Bolt | 2 |
| 13***09 | Screw | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F2-9-1 Remote Greasing, Rear Axle
| 14***01 | Washer, Aluminium | 2 |
| 15***00 | Connector | 2 |
| 33***25 | Bracket, Mount,Grease Pipes | 1 |
F2-2-1 Differential Assy
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-8-1 Rear Axle/Stabiliser, Rams, Installation
| 10***10 | Pin, Pivot | 2 |
| 10***27 | Pin, Pivot, 270mm X 50.7mm | 1 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
F2-6-1 Ram,Steering, Rear Axle, Installation
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 33***79 | G.A. | 0 |
F2-3-5 Wheel Hub & Shaft, Assembly 453/30700, Splined Non-Braked
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-5-1 Shaft,Drive, Installation
| 82***94 | Circlip, External | 2 |
| 91***01 | Kit-Spider, 93mm Over Caps, 30mm Cap Diameter; San 14311. Superseded By 91***15 Without Gr, Ease Nipples. | 2 |
| 91***01 | Shaft, Axle Side, 926.0mm Long | 1 |
F2-3-6 Wheel Hub & Shaft, Assembly 453/30710, Splined Non-Braked
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-12-1 Track Rod, Assembly 453/21300
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 45***00 | Rod, Track Assembly, (Cranked) | 1 |
| 80***53 | Bush, 33mm Long, 30mm Od X 25mm Id | 2 |
F2-1-2 Axle Assembly, 453/34830, Sd80 Pin Mounted
| 13***5D | Setscrew | 2 |
| 41***04 | Sealant, Multi-Gasket | 0 |
| 45***02 | Plug, Breather | 1 |
F2-3-1 Hub & Components
| 10***01 | Nut | 10 |
| 13***07 | Bolt | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-1-11 Axle Arm & Wheel Hub, 458/M0551 Assembly
| 13***09 | Screw | 4 |
| 22***71 | Circlip, External | 2 |
| 22***82 | Circlip | 1 |
F2-1-12 Axle Arm & Wheel Hub, 458/M0552 Assembly
| 13***09 | Screw | 4 |
| 22***71 | Circlip, External | 2 |
| 22***82 | Circlip | 1 |
F3-1-2 Propshafts, Ps750 Transmission
| 11***25 | Strap | 6 |
| 33***78 | Propshaft, 570mm Closed Crs. | 1 |
| 33***79 | Propshaft, 1130mm Closed Crs. | 1 |
F3-1-20 Drive Shaft, Universal, Joints (Spider Kits)
| 91***02 | Kit-Spider | 1 |
| 91***03 | Kit-Spider, 82mm Over Caps, 27mm Dia. | 1 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 1 |
F3-3-4 Wheels & Tires, 507 509
| 15***01 | Valve | 1 |
| 33***61 | Sealant, Tire,Multi-Seal, Heavy Duty | 0 |
| 33***71 | Wheel, Assembly,1400-24 14 Ply, Galaxy Giraffe L2 | 1 |
F3-4-1 Tire Labels, For Foam & Sealant
| 33***53 | Label, Foam Tires | 1 |
| 33***55 | Label, Sealant Tires | 1 |
F3-3-5 Wheels & Tires, Sales Special-Silver
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***70 | Wheel, Assembly,Galaxy Super, 1300-24 14ply,Silver | 1 |
| 33***61 | Sealant, Tire,Multi-Seal, Heavy Duty | 0 |
F3-3-2 Wheels & Tires, 510
| 15***01 | Valve, 115 Deg | 1 |
| 33***87 | Tyre, 17.5x25,16pr L2, Galaxy Giraffe | 1 |
| 33***26 | Wheel, Assembly,17.5x25 16pr, Galaxy Giraffe | 1 |
F3-1-1 Propshafts, Ps750 Transmission
| 11***25 | Strap | 6 |
| 33***78 | Propshaft, 570mm Closed Crs. | 1 |
| 33***60 | Propshaft, 1050 Closed Crs. | 1 |
F3-3-1 Wheels & Tires, 506
| 15***01 | Valve | 1 |
| 15***79 | Wheel, Assembly.1300-24 14pr, Galaxy Super Grader | 1 |
| 33***61 | Sealant, Tire,Multi-Seal, Heavy Duty | 0 |
F3-3-6 Wheels & Tires, Sales Special-Silver
| 15***01 | Valve, 115 Deg | 1 |
| 33***26 | Wheel, Assembly,Galaxy Giraffe, 17.5-25 16ply,Silver | 1 |
| 33***54 | Wheel, 14x25/1.3 20 Outset, Silver | 1 |
F5-14-1 Transmission, Cooler Hoses
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***5Z | Bolt, M12x20 | 1 |
F5-16-5 459/10234 Kit, Bevel Pinion & Gear, Bevel Gearbox
| 45***02 | Carrier, Bevel Bearing | 2 |
| 45***34 | Kit, Bevel Pinion & Gear, Ps750 | 2 |
| 45***47 | Adapter, 11" T/C | 1 |
F5-1-1 455/M0703, Ps750 Transmission, Bevel, Permanent 4wd ,Servo
| 04***00 | Converter, 11" | 1 |
| 04***68 | Kit, Drive Plate | 1 |
| 13***9Z | Screw, M10x35mm | 1 |
F5-10-1 Breather, Ps750
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 16***05 | Adapter | 1 |
| 32***64 | Breather | 1 |
F5-9-1 Dipstick, Transmission,Ps750
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 15***00 | Nut, Sealastic | 1 |
F5-16-1 455/10660, Bevel Gearbox,, Ps750, 11" T/C
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
F5-8-1 Torque Convertor, Plate & Couplings, Ps750,11"
| 04***00 | Converter, 11" | 1 |
| 04***68 | Kit, Drive Plate | 1 |
| 33***15 | Damper, Vibration | 1 |
F5-2-10 449/13240, Common Components
| 13***8Z | Screw, M8x30 | 14 |
| 13***9Z | Screw, M10x35mm | 11 |
| 13***1Z | Bolt, M8 X 45 | 6 |
F5-13-1 Transmission, Mountings
| 13***8Z | Bolt, M16 X 80 | 2 |
| 13***2Z | Bolt, M16 X 120 | 1 |
| 13***4Z | Bolt, M16 X 140 | 1 |
F5-14-5 Transmission, Oil Cooler
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 2 |
F5-0-3 Transmission/Gearbox, Identification
| 45***03 | Transmission, Bevel,Ps750, 4wd Permanent | 1 |
F5-2-1 449/M0704 Gearbox, Ps750 Permanent 4wd
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 25***98 | Valve, Solenoid Assembly | 3 |
| 33***59 | Bracket, Brake Caliper Mount, Hayes Caliper | 1 |
F5-0-1 Transmission/Gearbox, Layout Ps750
| 13***1Z | Bolt, M12 X 45 | 2 |
| 14***9Z | Washer | 2 |
| 44***03 | Cover, Flywheel Housing, 110mm X 79mm X 17mm | 1 |
G Brakes
G1-5-1 Brake Hoses & Pipes, Installation, Chassis,Servo
| 12***95 | Clip, Harness Support | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***4Z | Washer, Star | 1 |
G1-4-1 Brake Reservoir
| 12***56 | Cover, Brake Reservoir | 1 |
| 13***0D | Setscrew | 2 |
| 14***6D | Washer, M6 Plain | 2 |
G1-1-1 Brake System,Servo, Installation
G1-1-2 Servo Brake, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Bolt, M8 X 35mm | 2 |
| 13***1Z | Bolt, M8 X 45 | 2 |
G1-2-2 Master Cylinder
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt, M10 X 35mm Long | 3 |
| 13***2D | Nut, Thin | 1 |
G1-2-1 Master Cylinder
| 13***7D | Setscrew, M8x25 | 4 |
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***2D | Nut, Thin | 1 |
G1-3-1 Brake Pedal
| 13***1Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
| 14***2D | Washer, Plain | 1 |
G1-6-1 Servo Brake
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 15***55 | Brake, Remote Servo | 1 |
V Jcb444 Engine Installation, Components
V41-3-1 Engine Assembly, 320/40124,114bhp Mt3, See Catalogue 9812/2350
| 32***24 | Engine, Complete 74k 12v, Tca Mechtier 3 Voith | 1 |
| 33***00 | G.A, Engine Build 85kw, Mt3 Non-Reversing | 1 |
| 33***85 | I.A, Engine Assembly Mt3, 85kw | 1 |
V41-1-1 Engine Assembly, 320/40216,84bhp Mt3, See Catalogue 9812/2350
| 32***16 | Engine, Complete 63kw 12v, Tc Mech Tier 3 Fh2 Voith | 1 |
| 33***00 | G.A, Engine Build 63kw, Tier 3 Mech | 1 |
| 33***63 | I.A, Engine Assembly Mt3, 63kw | 1 |
V41-2-1 Engine Assembly, 320/40201,99bhp Mt3, See Catalogue 9812/2350
| 32***01 | Engine, Complete 74kw 12v, Tca Mech Tier 3 Fh2 Voith | 1 |
| 33***00 | G.A, Engine Build 74kw, Tier 3 | 1 |
| 33***74 | Engine, Assembly Mt3, 74kw | 1 |
V42-1-1 Engine Mounting, Bolts
| 13***9Z | Bolt; Replaces 60***09 | 7 |
| 13***4Z | Bolt | 3 |
| 13***9Z | Capscrew, M10 X 35mm | 1 |
V43-1-1 Filter,Air,Turbo
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 32***03 | Valve, Dust | 1 |
V43-11-1 Filter Minder
| 13***3Z | Screw | 2 |
| 13***3Z | Nut | 2 |
| 14***4Z | Washer, M4; Replaces Khn0424, San 12352 | 2 |
V44-13-1 Air Induction Hoses, Aspirator Option, Turbo Mt3
| 13***5Z | Bolt | 2 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
V44-1-1 Air Induction Hoses, Turbo
| 16***74 | Adapter, Vacuum Sensor | 1 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
| 22***15 | Clip, Jubilee | 2 |
V45-1-1 Exhaust System, Turbo
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
V46-3-1 Guard, Alternator Belt
| 13***5Z | Bolt | 5 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
V46-1-1 Radiator, Fittings & Mountings, Mt3
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Bolt, M10 X 130 | 2 |
V48-11-2 Charge Air Cooler
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***11 | Clip, Jubilee | 3 |
V48-1-1 Radiator & Hoses, Mt3
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***7Z | Screw, M10 X 25 | 2 |
V48-11-1 Charge Air Cooler, Installation Mt3
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 22***11 | Clip, Jubilee | 1 |
V50-1-1 Fuel Pipes, Fuel Tank To Filter
| 13***9Z | Bolt, M10 X 35 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 7 |
V51-1-1 Filter, Fuel Sediment
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
| 32***08 | Bowl, Assembly | 1 |
V55-1-1 Oil Level Dipstick, & Tube (Long) Mt3
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
| 13***3Z | Screw, Star Drive, M8 X 16 | 1 |
| 32***27 | O Ring | 1 |
V58-1-1 Oil Breather Hose, Ccv Filter Mt3
| 22***07 | Clip, Jubilee | 1 |
| 26***00 | Clip | 1 |
| 33***44 | Hose, Engine Breather, Vent To Atmosphere | 1 |
507-42 serial number reference
The machine identification plate is located on the right-hand chassis frame near the operator-cab access step. A duplicate serial is stamped into the main chassis frame between the front and rear axles. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 1185016 - 1185019 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 1402000 - 1405438 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2083497 - 2084497 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2144565 - 2149565 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2173052 - 2183052 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2336575 - 2356575 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2405802 - 2407000 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2433101 - 2438600 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2440751 - 2441100 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2501401 - 2502400 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2576731 - 2577330 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2672801 - 2673400 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2734381 - 2735380 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2753404 - 2755404 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2793211 - 2795210 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2902000 - 2908741 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2910702 - 2913700 | Applicability for boom lift cylinder and steering cylinder seal kits | |
| 2928886 - 2931885 | Applicability for boom lift cylinder and steering cylinder seal kits |
Frequently asked questions
What engine does the JCB 507-42 use?
The JCB 507-42 uses a Tier 4 Final JCB EcoMAX engine producing 74 hp (55 kW). It features a sealed-for-life SCR system and requires no DEF or DPF.
What is the operating weight of the JCB 507-42?
The operating weight varies by configuration but is approximately 21,300 lb (9,661 kg) to 22,000 lb (9,979 kg).
What model replaced the JCB 507-42?
The sources do not explicitly name a direct successor model to the 507-42. It is part of the JCB Loadall 500-series telehandler family.
What 507-42 owners discuss
What engine powers the JCB 507-42 and does it require DEF?
The JCB 507-42 is powered by a JCB EcoMax Tier 4 Final diesel engine. This engine is designed to be compliant without requiring Diesel Exhaust Fluid (DEF) or aftertreatment systems. Net power is rated at 74 hp (55 kW). Some sources cite approximately 109 hp, which varies by configuration or series. The engine operates efficiently at low speeds, providing high torque from 1,300-1,400 rpm.
What are common hydraulic and powertrain behaviors reported by users?
Users frequently report hydraulic hose leaks and pressure loss affecting lifting performance. Sluggish driving or hesitation to move often indicates issues with the fuel supply pump, fuel injection, or internal mechanical problems confirmed by debris in the filter suction screen. A common speed issue involves the machine failing to exceed 8 mph despite having four speeds; this may be a rental service limit or a transmission fault. Blocked oil ways are a known cause of bearing failure in the gearbox.
What are typical undercarriage and wear patterns for this telehandler?
The machine uses JCB epicyclic hub reduction drive/steer axles with Max-Trac torque proportioning differentials. These axles are designed to reduce maintenance. The telehandler features a dry lubricant system for wear pads, which extends service intervals to 500 hours. The high-boom profile and pivot allow visibility but require attention to the double boom chain extension system for efficiency and safety.
What engine quirks or maintenance notes are specific to the JCB EcoMax platform?
New engines do not require a running-in period and should be used immediately in normal work cycles to avoid glazing. The first engine oil change should occur after 100 hours. Unusual noises, such as a deep rhythmic knocking that increases under load, indicate serious internal problems. Starting problems are the most common reason owners seek troubleshooting help, often linked to fuel delivery or sensor/ECM control issues.
What are common electrical or sensor issues?
No-start conditions often stem from battery voltage issues, faulty starter motors, or ignition switch failures. Users report hesitation in drive functions that may be traced to sensor or electrical faults. A safety switch issue can prevent the machine from starting when stuck in soft dirt. The machine includes a factory-fit immobilizer activated by a unique key or optional push-button PIN system.
What should be checked when buying a used 507-42?
Verify the serial number against the machine identification plate to confirm the model and engine type. Check for hydraulic hose leaks and cylinder seal seepage. Inspect the filter suction screen for metal or debris to assess internal mechanical health. Test the park brake holding capability and verify the operation of the 3.5-inch color TFT screen for fuel and warning data. Ensure the 2000-hour service, including valve lash adjustment, has been performed if the machine has approximately 2,000 hours.
What safety-critical systems must be verified?
The full cab or canopy must be ROPS and FOPS certified. The reverse alarm is a standard safety feature. The boom chain system uses large, doubled chains for stability. The Automatic Rear Axle Stabilization (RAS) system must be functional. Have your dealer verify the integrity of the safety switch circuit and the calibration of the load chart data for the specific attachment installed.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 507-42 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.